Trabajos medical assembly en Riverside, CaliforniaCrear alertas

Job Description Apprentice Plumber (ID# 662) Full-Time | Multiple Locations Nationwide About Our Client Our Client is a fast-growing, full-service plumbing franchise. We provide expert residential, commercial, and industrial plumbing, drain, and sewer solutions with same-day service and 24/7 emergency availability. Our team of certified professionals is committed to quality workmanship, upfront pricing, and outstanding customer care. Position Overview We are seeking a motivated Apprentice Plumber to join our growing team. This is an excellent opportunity to launch your plumbing career by learning hands-on from experienced Journeyman and Master Plumbers in a supportive, fast-paced environment. You will earn while you learn, gaining the real-world skills and training needed to advance toward your Journeyman license. Key Responsibilities • Assist Journeyman and Master Plumbers with the installation, repair, and maintenance of plumbing systems including pipes, fixtures, drains, sewers, and water heaters, • Perform basic plumbing tasks such as pipe cutting, fitting assembly, and fixture installation under direct supervision, • Transport tools, equipment, and materials to and from job sites, • Maintain a clean, organized, and safe work environment on all job sites, • Follow all safety protocols, building codes, and company procedures, • Support senior plumbers with emergency service calls as needed, • Complete required classroom or technical training as part of an apprenticeship program, • Maintain accurate records of work performed and materials used, • Communicate professionally with customers and team members Qualifications • High school diploma or GED required, • Enrollment in or willingness to enroll in a licensed plumbing apprenticeship program, • Basic mechanical aptitude and eagerness to learn the trade, • Ability to follow instructions and work effectively as part of a team, • Strong work ethic, reliability, and punctuality, • Valid driver's license with a clean driving record, • Ability to lift up to 75 lbs and work in confined spaces, at heights, or outdoors in varying weather conditions, • Prior construction, maintenance, or trade experience a plus but not required Compensation • Base salary: $34,000 – $47,500 per year, depending on experience and location, • Hourly equivalent: $16 – $23/hour, with increases as apprenticeship milestones are met, • Top earners in high-demand markets: up to $56,500+, • Overtime pay available (1.5x standard rate), • Pay increases tied to apprenticeship progression Benefits • Medical, dental, and vision insurance, • Paid time off and holidays, • Company-provided vehicle or vehicle allowance, • Uniforms and equipment supplied, • Paid on-the-job training, • Tuition/apprenticeship program support, • Clear career path to Journeyman and Master Plumber, • Career advancement opportunities Why Our Client? We believe in building careers from the ground up. As an Apprentice Plumber with Our Client, you'll gain the hands-on experience, mentorship, and structured training needed to grow into a highly skilled, well-compensated plumbing professional — all while earning a competitive wage from day one.

Job Description Position Summary Responsible for assembling, installing, troubleshooting, and sustaining electrical systems within automated assembly equipment and advanced manufacturing platforms. This role supports low-voltage and high-voltage systems. This position operates in a Production environment and serves as a Subject Matter Expert (SME) for assigned work centers. Assemblers play a key role in the manufacturing process by connecting and securing parts to create finished products. They follow detailed work instructions, use tools and machinery to perform precise tasks and verify that components meet quality and safety standards. Key Responsibilities • Assemble components parts into completed units according to blueprint specifications., • Support shipping and receiving, materials handler and engineering if needed., • Inspect parts and completed units using visual checks, fixtures, or test equipment., • Engage in improvement activities, • Testing using high voltage, • Assemble components with specialized tooling, • Work alongside automated robots., • Maintain a clean, safe, and organized work area in accordance with safety and 5S standards, • Complete the required production checklist, logs and documentation, • Follow work instructions, drawings, • Electrical/Mechanical Installation & Assembly, • Read and interpret electrical schematics, pack layouts, and engineering documentation., • Install and integrate wiring harnesses and control modules., • Perform routing, terminating, labeling, and verification of wiring using approved methods., • Perform precision alignment and torque-controlled fastening., • Install mechanical fasteners, bushings, bearings, gaskets, pneumatic components, and structural supports., • Troubleshooting & Escalation Support, • Ability to fix electrical faults, alarms, interlock failures, communication issues, and automation system abnormalities on the line is required., • Be able to solve technical issues with robot and follow our escalation plan process during troubleshooting., • Must conduct meeting with Supervisor/Lead/engineers on findings of the issue to find a resolution., • Production Line Coverage, • Maintain full operator-level proficiency in assigned equipment., • Operate production equipment as needed., • Ensure safe startup, shutdown, and operational execution in accordance with approved procedures., • Fast paces manufacturing assembly line completing 7-9 units a day., • Operate all production line work centers and become a master in each area., • Able to teach new hires in all work centers and meet team standards, • Assembly workers will cross train in all lines and may be moved mid shift to help if needed in other work centers., • Safety & Compliance, • Follow all high-voltage safety, LOTO, NFPA, arc-flash, and PPE requirements., • High voltage training preferred., • Support audit readiness, inspections, and compliance documentation., • Promote safe handling of energized systems. Position Requirements • At least 3 - 6 years of electrical assembly or industrial automation experience., • Strong understanding of industrial electrical systems and assembly process., • Proficiency in the use of hand tools, multimeters, torque drivers, and measurement equipment., • Knowledge of grounding, shielding, circuit protection, and safety systems., • Strong analytical and problem-solving skills., • Ability to work independently and collaboratively in a technical environment., • High paced assembly environment, experience working with quality and engineering., • Experience working on electrical components and low and high voltage is recommended. Preferred Qualifications • Experience working in an EV environment is highly desired., • Experience in manufacturing, automotive, aerospace, or industrial environments preferred., • Robotics certified or experience is preferred., • Experience troubleshooting industrial automation systems preferred., • Mandarin language is a plus but not required., • Experience with high-voltage safety protocols preferred., • Technical certification or vocational training in electrical systems is preferred.Benefits:, • Comprehensive benefits package: Medical (including FSA & HSA), dental, vision, life and disability insurance, EAP, mental health, and wellness programs, • 401(k) with employer match, • Paid time off and twelve (12) paid holidays, • Employee referral program, • Career growth and development opportunities Equal Opportunity Employer ElDorado National California Inc. (ENC) is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, genetic information, or any other protected class under applicable federal, state, and local laws. We are committed to fostering a diverse and inclusive workplace where all employees feel valued and respected. ENC takes affirmative action to employ and advance employment opportunities for minorities, women, protected veterans, and individuals with disabilities. We actively encourage qualified candidates from all backgrounds to apply and join our team. ENC is also committed to ensuring that individuals with disabilities have equal access to opportunities. If you require a reasonable accommodation to complete the application process, please contact HR Department for assistance. In accordance with California's wage transparency law (Senate Bill 1162), we are committed to pay equity and transparency. The salary range reflected on the job positing is our good faith estimate of what we expect to pay for this role at the time of posting. While we do not typically hire at the top of the salary range, initial offers are based on the candidate’s qualifications and experience, with opportunities for growth and increases over time.

The assembler incumbent performs value adding processes in the assembly department for pump builds. Complete final assembly of product consisting of tasks such as kitting, assembly, testing of finish goods, and final packaging including but not limited to Boxing and Palletizing. Education: High school or equivalent preferred Experience: • No product assembly experience required; ability to learn, • Experience using air and hand tools, • Mechanically inclined, • Assembly or production experience a plus, • Packaging and Palletizing in Production experience a plus Knowledge, Skills and Abilities: • Ability to read and conform to company standards and building requirements, • Ability to work in a standing environment, • Ability to read and comprehend simple instructions, • Mechanically inclined, • Must be able to work flexible and/or extended hours and report to work on a regular, punctual basis Duties and Responsibilities: • Perform all router steps on the work order required to complete a pump build which includes but is not limited to kitting, sub-assembly, and boxing of pump, • Follow standard work in the production cell to conform to product design specifications and comply with all quality assurance procedures, • Perform TPM (total preventative maintenance) on department tools and equipment, • Perform Hydro-test on required work order and capture certificate, • Ensures duties performed meet company policies, procedures, and safety requirements, • Capture production log and report to Supervisor and Lead daily, • Maintain inventory accuracies by transacting work order and move orders properly and completely in Oracle, • Responsible for completing priorities set forth by the lead and supervisor for the day, • Must comply with the Company's policies and procedures, • Performs all duties as assigned by the department lead to support production, • Must demonstrate commitment to safety & continual improvement of OH&S (Occupational Health and Safety) performance, registered standards, company policy, integrity, ethics, and legal compliance, • Practice lean manufacturing and continuous improvement in the daily work, • Maintain a safe and clean work environment by complying with company procedures and rules, • Work overtime as required, • All other duties assigned Benefits for this position include: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including 11 paid holidays per calendar year, paid vacation days beginning at 120 hours annually, 40 paid sick leave hours annually or as provided under state and local paid sick leave laws, tuition assistance; business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies.

Job Description Job Title: Lot Porter Department: Service Supervisor: Service Manager Summary Description Moves and cleans motorcycles, keeps the motorcycles in sound working condition, and helps the Service Manager as requested. Duties and Responsibilities • Provide prompt, dependable, high quality service to internal and external customers., • Maintain the highest level of customer satisfaction., • Maintain clean, efficient work areas and service facility, including company property such as work trucks and trailers., • Transferring units in and out of the Service Department., • Forklift operations., • Washing/Detailing all units., • Unloading new units off freight trucks., • Assembly and PDI of new units., • Maintaining the entire lot., • Perform other related duties as assigned or requested. Benefits: • Employee Discounts, • Paid Training, • 401K with Company match, • Medical, Dental, and Vision Insurance, • Voluntary Term Life and Long-Term Disability, • Accident, Critical Illness and Cancer Insurance, • Flexible Spending Account access, • Legal Shield and Identity Theft Shield, • Supervisory Responsibilities, • None Qualifications & Job Requirements • Must have 2+ years of motorcycle experience., • Capable of pushing and loading motorcycles., • High school diploma or equivalent., • Valid driver’s license and motorcycle endorsement., • Clean driving record., • Knowledge and experience with sales of Harley-Davidson motorcycles and other products and services sold by the dealership, or the demonstrated ability to quickly learn them., • Passion for the motorcycling lifestyle and riding community., • Attention to detail., • High energy level needed., • Maintain a positive attitude and relationship with all other employees., • Ability to work a flexible schedule including weekends, Holidays, and evenings., • Proficient in meeting deadlines on a timely manner. Physical Demands • Requires the use of both hands., • Frequently required to bend, stop, crouch, reach, handle tools and lift 50lbs of material., • Requires the ability to balance and push an 800+lb motorcycle. Working Conditions • The noise level in the work environment is usually loud., • Potential exposure to battery acid, gasoline, chemical cleaning materials or other toxic materials commonly found in a motor vehicle service department., • Occasionally exposed to exhaust fumes or other airborne particles., • Frequently works near moving mechanical parts.

The assembler incumbent performs value adding processes in the assembly department for pump builds. Complete final assembly of product consisting of tasks such as kitting, assembly, testing of finish goods, and final packaging including but not limited to Boxing and Palletizing. Education: High school or equivalent preferred Experience: • No product assembly experience required; ability to learn, • Experience using air and hand tools, • Mechanically inclined, • Assembly or production experience a plus, • Packaging and Palletizing in Production experience a plus Knowledge, Skills and Abilities: • Ability to read and conform to company standards and building requirements, • Ability to work in a standing environment, • Ability to read and comprehend simple instructions, • Mechanically inclined, • Must be able to work flexible and/or extended hours and report to work on a regular, punctual basis Duties and Responsibilities: • Perform all router steps on the work order required to complete a pump build which includes but is not limited to kitting, sub-assembly, and boxing of pump, • Follow standard work in the production cell to conform to product design specifications and comply with all quality assurance procedures, • Perform TPM (total preventative maintenance) on department tools and equipment, • Perform Hydro-test on required work order and capture certificate, • Ensures duties performed meet company policies, procedures, and safety requirements, • Capture production log and report to Supervisor and Lead daily, • Maintain inventory accuracies by transacting work order and move orders properly and completely in Oracle, • Responsible for completing priorities set forth by the lead and supervisor for the day, • Must comply with the Company's policies and procedures, • Performs all duties as assigned by the department lead to support production, • Must demonstrate commitment to safety & continual improvement of OH&S (Occupational Health and Safety) performance, registered standards, company policy, integrity, ethics, and legal compliance, • Practice lean manufacturing and continuous improvement in the daily work, • Maintain a safe and clean work environment by complying with company procedures and rules, • Work overtime as required, • All other duties assigned Benefits for this position include: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including 11 paid holidays per calendar year, paid vacation days beginning at 120 hours annually, 40 paid sick leave hours annually or as provided under state and local paid sick leave laws, tuition assistance; business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies.

Job Description Weld Shop Supervisor Location: Riverside, CA Salary Range: $84,000 - $95,000/yr. Schedule 6:00am - 2:30pm Position Summary The Weld Shop Supervisor leads the day-to-day execution and people performance of ENC's Weld Shop, where complete heavy-duty transit bus structures are fabricated in carbon steel and 304L stainless steel in an engineered-to-order, mixed-model production environment. This role is accountable for safety, quality, delivery, labor efficiency, and schedule attainment while adapting to changing models, options, material availability, and engineering requirements. As a visible, hands-on leader, the Supervisor provides clear direction, listens and responds to team member concerns, reinforces standards consistently, and maintains a disciplined, respectful, and productive shop environment. This position develops employees, resolves barriers quickly, and partners across departments to keep work moving and commitments on track. Key Responsibilities: • Lead daily Weld Shop operations, including fit-up, welding, and completion of carbon steel and 304L stainless steel bus frame structures, to meet safety, quality, delivery, cost, and productivity commitments., • Translate the production schedule into daily priorities, staffing plans, work assignments, and recovery actions; adjust in real time for mixed models, engineered-to-order content, employee skills, material availability, equipment status, and engineering constraints., • Set clear expectations at the start of each shift, conduct daily huddles, verify work in process, and communicate safety, quality, schedule, and staffing priorities throughout the day., • Maintain a consistent shop-floor presence; listen to employee concerns, assess the facts, address issues promptly and fairly, close the loop, and escalate matters when additional support or authority is required., • Apply Company policies and work rules fairly and consistently. Manage attendance, conduct, and performance through timely coaching, recognition, documentation, and corrective action in partnership with the Production Manager and Human Resources., • Build constructive employee and labor relations through respectful communication, conflict resolution, de-escalation, and reliable follow-through while maintaining clear work direction and accountability., • Supervise Weld Leads and Welders with accountability for schedule and takt attainment, labor hours and efficiency, first-pass quality, rework, safety performance, attendance, and housekeeping., • Assign work based on qualifications, demonstrated skills, and capacity; maintain skill coverage, coordinate hands-on training and cross-training, complete performance reviews, and develop future leaders., • Ensure work is performed to released drawings, specifications, work instructions, Welding Procedure Specifications (WPS), and quality requirements, including proper identification, handling, and segregation of carbon steel and stainless steel materials., • Partner with Quality and welding inspection personnel to verify workmanship, support required inspections, contain nonconforming work, perform root-cause analysis, implement corrective actions, and prevent recurrence., • Enforce all environmental, health, and safety requirements, including required personal protective equipment, hot-work controls, ventilation and fume extraction, equipment guarding, lockout/tagout, and safe material handling; stop and correct unsafe work., • Ensure welding equipment, fixtures, tooling, gases, consumables, and extraction systems are available, serviceable, and used correctly; coordinate maintenance and repairs before they affect production., • Coordinate with Planning, Materials, Manufacturing Engineering, Quality, Maintenance, EH&S, and downstream production areas to resolve shortages, design questions, quality issues, and workflow constraints., • Monitor and communicate key performance indicators and maintain accurate records for labor, attendance, output, schedule status, quality, training, downtime, and corrective actions., • Drive continuous improvement through standardized work, 5S, visual management, problem solving, and workflow or layout improvements that reduce waste and improve safety, quality, and throughput., • Support staffing and overtime plans, employee selection and onboarding, and other production priorities as assigned by the Production Manager., • Other duties as assigned. Position Requirements: • Associate or bachelor’s degree in Manufacturing, Operations, Engineering, Welding Technology, or a related field, plus 3–5 years of front-line supervisory or leadership experience in a manufacturing, fabrication, welding, assembly, or other skilled-trades production environment; OR, • High school diploma, plus a minimum of 10 years of supervisory experience within welding/fabrication, • Demonstrated employee and labor relations experience, including listening to and resolving workplace concerns, conflict de-escalation, performance documentation, and consistent administration of policies and corrective action., • Proven ability to set expectations and hold skilled production teams accountable for safety, quality, delivery, attendance, labor efficiency, and workplace conduct., • Ability to lead effectively in a high-mix, low-volume, mixed-model or custom manufacturing environment and to re-prioritize work as conditions change., • Strong judgment, sense of urgency, problem-solving ability, and attention to detail., • Excellent verbal and written communication, active listening, coaching, and conflict-resolution skills., • Ability to interpret production schedules, staffing requirements, labor plans, performance metrics, and manufacturing documentation., • Working knowledge of manufacturing safety, quality systems, lean manufacturing, continuous improvement, and workflow optimization., • Proficiency with Microsoft Office and the ability to learn ERP and production-reporting systems. Preferred Qualifications: • Prior leadership or hands-on experience in structural welding or metal fabrication, particularly with carbon steel and 304L stainless steel., • Ability to read and interpret engineering blueprints, weld symbols, dimensional requirements, and Welding Procedure Specifications (WPS)., • Working knowledge of applicable American Welding Society (AWS) codes and standards, including AWS D1.1 and AWS D1.6, and AWS D1.3 where applicable., • Familiarity with welder qualifications, weld traceability, inspection practices, nonconformance control, and repair documentation., • Experience with heavy-duty vehicles, commercial vehicles, engineered-to-order products, or other large structural assemblies. Work Environment: This is an onsite position based in Riverside, CA and requires being 100% onsite. Benefits: • Comprehensive benefits package: Medical (including FSA & HSA), dental, vision, life and disability insurance, EAP, mental health, and wellness programs, • 401(k) with employer match, • Paid time off and twelve (12) paid holidays, • Employee referral program, • Career growth and development opportunities Career Growth at ENC We believe great careers and leaders are built from within. Many of our team members have advanced into roles that lead or into specialized technical positions. We invest in hands-on training, skill development, and long-term career pathways within manufacturing operations.

Job Description Job Summary Aleph Group Inc. is seeking an experienced CAD / SolidWorks Designer with a strong background in fabrication and manufacturing. The ideal candidate will be comfortable taking concepts and preliminary layouts and developing them into accurate 2D drawings, 3D models, fabrication drawings, and production-ready documentation. This position requires practical knowledge of how products are actually built—not just how they are drawn. Experience working directly with fabrication and production teams is highly preferred. Key Responsibilities • Develop detailed 2D and 3D CAD drawings for custom fabrication projects., • Create and modify SolidWorks models, assemblies, and fabrication drawings., • Develop SketchUp 3D models and layouts for conceptual and production planning., • Prepare detailed drawings including dimensions, tolerances, materials, and fabrication requirements., • Convert concepts, sketches, measurements, and engineering information into production-ready drawings., • Work closely with engineering, project management, and fabrication personnel throughout the design and production process., • Revise drawings as required based on field measurements, production requirements, and customer changes., • Assist with component layouts, structural framing, cabinetry, equipment placement, and mechanical/electrical coordination., • Maintain organized drawing files, revisions, and project documentation. Qualifications • Proven experience with SolidWorks, AutoCAD/CAD, and SketchUp., • Previous experience working in a fabrication, manufacturing, specialty vehicle, architectural metal, or similar production environment., • Strong understanding of fabrication methods, materials, dimensions, tolerances, and assembly processes., • Ability to read and interpret engineering drawings and specifications., • Ability to accurately measure existing components and create drawings/models from those measurements., • Strong attention to detail and ability to identify potential fabrication or fitment issues before production., • Ability to work independently while communicating effectively with production and engineering personnel., • Good organizational and problem-solving skills. Preferred Experience Experience with aluminum and steel fabrication, structural framing, custom cabinetry, sheet metal, specialty vehicles, trailers, mobile units, or custom-built equipment is highly desirable. What We Are Looking For We are looking for a hands-on designer who understands fabrication and can effectively bridge the gap between design and production. The successful candidate will be practical, detail-oriented, reliable, and comfortable working directly with our fabrication team to turn designs into finished products. \nCompany Description Aleph Group Inc. is a manufacturer of mobile medical vehicles and other types of mobile units, established in Southern California in 2001. Please, visit our website at: www.alephgroupinc.com Aleph Group Inc. is a manufacturer of mobile medical vehicles and other types of mobile units, established in Southern California in 2001. Please, visit our website at: www.alephgroupinc.com

Job Description MSM Industries, LLC has been a trusted partner to the U.S. Navy and its prime contractors for over 20 years. As an ISO 9001:2015 certified manufacturing business, we specialize in advanced material solutions for signature reduction, vibration and acoustic management, and environmental control. MSM also serves as a high-performance system integration and assembly provider for key customers. With in-house manufacturing and a track record for on-time, high-quality deliveries, MSM is known for innovation, reliability, and rapid response to complex program needs. MSM is part of Canopy Aerospace & Defense, a platform built to accelerate the future of advanced materials for space, defense, and maritime systems. Canopy A&D delivers specialized materials and components that carry customers from concept through sustainment. Canopy A&D’s advanced signal attenuation technologies and production-scale manufacturing accelerate the fielding of platforms that are faster, cooler, and quieter. Our adaptive approach ensures solutions evolve at the pace of shifting challenges, keeping our customers ahead of the curve. Role Summary This role leads the design and development of advanced composite components and assemblies for MSM’s new development projects as well as production support and sustainment of existing product lines. It combines hands-on engineering with cross-functional collaboration to drive innovation from concept through production. The position emphasizes mechanical design, prototyping, and testing of composite phenolic and elastomer-based systems, with a strong focus on manufacturability, production readiness, and compliance with aerospace and defense standards. Ideal candidates bring a blend of technical expertise, leadership, and practical experience in advanced materials and ruggedized hardware applications. Key Responsibilities • Lead the design and development of complex mechanical components and assemblies for elastomer and phenolic composite systems., • Collaborate with cross-functional teams to define and implement scalable, high-quality manufacturing and assembly processes., • Create and maintain process control documentation to ensure compliance, consistency, and production efficiency., • Collaborate with Manufacturing and Quality teams to identify, capture, and implement opportunities for process improvement on existing production lines., • Conduct trade studies and define requirements to optimize designs for radar absorption, thermal control, vibration damping, and mechanical performance., • Perform structural analysis using hand calculations and FEA on composite structures and precision-engineered components., • Prototype and test advanced materials (e.g., carbon fiber, silicones, urethanes), iterating based on performance data., • Investigate material and hardware failures, lead root cause analyses, and implement corrective actions in both development and production phases.Required Qualifications, • 3+ years of mechanical design experience, with emphasis on composites, thermal control, and vibration damping materials., • Proven leadership in engineering projects involving design, prototyping, and manufacturing of mechanical, phenolic, and polymer-based systems., • Hands-on experience with technical projects, including collegiate or professional work focused on advanced materials and mechanical components., • Strong understanding of elastomer and phenolic manufacturing processes, material properties, and relevant testing standards., • Proficient in CAD software with the ability to produce high-quality, industry-compliant engineering drawings., • Solid grasp of engineering fundamentals including structures, materials science, thermal management, and mechanical systems., • Skilled in prototyping and fabrication techniques such as composite compression curing, composite layups, and mechanical assembly., • Bachelor’s degree in Mechanical Engineering or a related field, or equivalent industry experience in advanced material applications., • Ability to communicate effectively in verbal and written EnglishPreferred Qualifications, • Proficient in SolidWorks or similar CAD/CAM tools, with experience using PLM systems., • Strong knowledge of GD&T per ASME Y14.5 and its application in engineering drawings., • Advanced design experience across CNC machining, composites, ceramics, sheet metal, and compression molding, including tooling and mold design., • Demonstrated leadership and excellent interpersonal skills in cross-functional engineering environments., • Familiarity with qualification campaigns for aerospace and defense hardware, including ruggedized system design., • Experience designing for harsh environments, ensuring durability and performance under extreme conditions., • Active U.S. Security Clearance (Secret or higher), or the ability to obtain one based on eligibility. This includes meeting background check and other requirements, as required for access to controlled defense-related information and facilities., • Master’s degree in Mechanical Engineering or a related field, or equivalent industry experience in advanced material applications., • Experience in an ISO 9001 or other quality-driven manufacturing environment.Additional Requirements, • Must have professional working proficiency reading, writing, and speaking English., • Ability to work in office, lab, and manufacturing environments with occasional exposure to noise, chemicals, dust, industrial equipment, and temperature variations, • Must be able to lift and carry up to 35 lbs. and perform tasks involving standing, walking, bending, and manual assembly., • Visual acuity required for reading technical drawings, inspecting components, and operating precision instruments., • Occasional travel to supplier or test sites, including outdoor or industrial settings, with adherence to company and OSHA safety protocols., • Ability to safely wear required personal protective equipment (PPE), including respirators, gloves, eye protection, and protective clothing., • Ability to follow all company safety policies, OSHA requirements, and manufacturing procedures. The above statements are intended to describe the general nature and level of work performed. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. Management may modify or assign additional duties as needed. Job DetailsFLSA Classifications: Salary (Exempt)Type: Full TimeSalary Range: $80,000 to $140,000Business Hours: Core Business hours (flexibility to support project needs beyond standard times)Reports to: Head of EngineeringBase Location: Riverside, CATravel: Up to 10% Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Total compensation will also include a comprehensive set of benefits including but not limited to: Company paid employee medical, dental and vision insurance. 401K company match (eligibility required), paid sick leave, paid vacation, paid holidays and discretionary bonuses. Export Control Requirements To conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. MSM Industries is an Equal Opportunity Employer, employment with MSM Industries is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: Receiving Inspector Job Description The Receiving Inspector verifies that all incoming materials, components, and assemblies meet engineering and customer quality requirements. This role applies Geometric Dimensioning & Tolerancing (GD&T), evaluates supplier documentation, and inspects to relevant industry standards such as AWS and IPC/WHMA-A-620 for cable and harness assemblies. The inspector maintains accurate records, supports audits, and contributes to continuous quality improvement. Responsibilities • Perform visual, dimensional, and documentation inspections of incoming materials, fabricated components, and electrical assemblies to ensure they meet specified quality requirements., • Interpret and apply Geometric Dimensioning & Tolerancing (GD&T) based on engineering drawings and specifications., • Inspect wire harnesses, electrical connectors, and assemblies in accordance with IPC/WHMA-A-620 workmanship standards., • Verify supplier certifications, test reports, and material traceability against purchase orders, drawings, and applicable standards., • Identify and segregate nonconforming materials and initiate, document, and maintain Nonconformance Reports (NCRs) in accordance with the Quality Management System., • Participate in Material Review Board (MRB) meetings to evaluate nonconforming items and support disposition decisions., • Collaborate with suppliers and Purchasing to implement and verify Supplier Corrective Actions (SCARs)., • Maintain inspection records, calibration compliance, and traceability documentation for all inspected items., • Support internal and supplier audits and assist with quality improvement and root cause analysis activities., • Ensure adherence to safety protocols and ISO 9001 quality system requirements during all inspection activities. Essential Skills • High school diploma or equivalent., • 3–5 years of quality inspection experience in a manufacturing or fabrication environment., • Hands-on experience applying GD&T and interpreting engineering drawings., • Practical knowledge of IPC/WHMA-A-620 inspection criteria for cable and harness assemblies., • Experience with nonconformance reporting, Material Review Board (MRB) processes, and supplier corrective action activities., • Familiarity with ERP or Quality Management System (QMS) software and accurate data entry of inspection results., • Proficiency with precision measurement tools such as micrometers, calipers, indicators, and height gauges., • Strong analytical and problem-solving skills applied to quality and inspection issues., • Effective communication and collaboration skills for working across departments and with suppliers., • High attention to detail and excellent documentation accuracy. Additional Skills & Qualifications • Associate degree or technical certification in a related field is preferred., • Experience inspecting weldments, machined parts, or electrical harnesses is preferred., • Working knowledge of AWS and related material standards is an asset., • Familiarity with blueprint reading and harness assembly and inspection practices is beneficial., • Experience in quality control, quality assurance, and quality inspection processes is advantageous. Why Work Here? This contract-to-hire opportunity offers a pathway to long-term employment with a focus on quality, continuous improvement, and professional development. You will work in an environment that values precision, collaboration, and cross-functional teamwork, providing the chance to expand your technical skills and grow within a structured quality system. Work Environment This role is based in manufacturing and warehouse areas with moderate noise and activity levels. You will stand or walk for extended periods and regularly lift and move materials up to 40 pounds. Work is performed around production equipment and storage areas, requiring adherence to safety protocols and quality procedures in a hands-on, shop-floor inspection environment. Job Type & Location This is a Contract to Hire position based out of Riverside, CA. Pay and Benefits The pay range for this position is $28.00 - $31.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Riverside,CA. Application Deadline This position is anticipated to close on Sep 28, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Sheet Metal Fabricator Starting at $20.00 to $24.00 DOE Luxfer Superform operates from Riverside, California (USA). We specialize in Superforming of Aluminum alloys as a 1st Tier supplier to major OEMs. Established in 1974 Superform serves Customers in all the major markets including Aerospace. Position Purpose: The Sheet Metal Fabricator is responsible for grinding, sanding, polishing, and assembly of fabricated sheet metal products using hand, and power tools to ensure a smooth surface while inspecting products for flaws or cracks to ensure the quality and appearance of sheet metal components used in manufacturing of Aerospace and Automotive products. Main Responsibilities: • Prepare materials for welding, including cleaning, sanding, and applying finishes as required., • Identify and repair any imperfections on the material (parts) prior to any outside process., • Grind, Sand, Trim, Deburr, and Polish materials according to specifications., • Collaborate with the Quality Control department to ensure that finished products meet established quality standards and customer specifications., • Communicate with Maintenance team to report malfunctioning equipment to ensure that tools are in good working order., • Work closely with all production team members to create efficient workflow., • Maintain accurate records of work performed, including specifications, adjustments made, and time spent on each job., • Adhere to production schedules by working within established timelines to meet production goals and delivery deadlines., • Comply with all safety guidelines and protocols, including the use of personal protective equipment and safe handling of materials., • Maintain a clean and organized work area., • Identify opportunities for process improvement in sheet metal finishing techniques to enhance efficiency and quality. Education and Experience: • Minimum of one (1) year experience with sheet metal. Preferably in an aerospace or automotive manufacturing environment., • High School Diploma or Equivalent required., • Experience operating Angle grinder, Blend motor, Hand sander, Band saw, Hand drills, Rivet Gun, and Rivet Machine are required., • Ability to utilize Calipers, Depth Gauge, Height Gauge, and Micrometer., • Able to read and understand manufacturing work instructions., • Must be able to occasionally lift product up to 50lbs. and frequently stand for extended periods of time., • Ability to read Blueprints preferred., • A self-motivated individual with the ability to take directions, and then schedule and follow through with daily tasks and assignments. Benefits: • Medical, Dental, Vision and Life Insurance, • 401k with Employer Match up to 6%, • Paid Holidays, • Paid Vacation, • Paid Sick Time Monday - Friday 5:30 AM to 2:00 PM Overtime as needed. We are committed to a safe, drug-free work environment, and pre-employment drug screening and physical and background checks are required prior to starting. Luxfer Superform is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status, or disability (in compliance with the Americans with Disabilities Act) with respect to employment opportunities. Women, minorities, and veterans are encouraged to apply. This position requires access to our export-controlled commodities, technical data, technology, and services. These items are restricted under the International Traffic in Arms Regulations (ITAR) to U.S. Citizens, Lawful Permanent Residents of the U.S., and properly licensed foreign persons. Therefore, employment is contingent on compliance with ITAR regulations and successfully obtaining and maintaining the necessary export authorization license from the U.S. Department of Commerce’s Bureau of Industry and Security, U.S. Department of State’s Office of Defense Trade Controls, or other applicable government agencies. Candidates must be authorized to work in the US. We E-Verify! Powered by JazzHR it5clStAXo

Job DescriptionWhat You’ll Be Doing TERREPOWER is seeking a dedicated individual to join our team as Repair Specialist. If you are a dedicated individual interested in joining a growing company in the automotive parts industry, we want you on our team! As a Repair Specialist, you will perform the production duties below: • Review each product to determine the required repairs, • Ensure you have the proper tools and materials required to repair the product to an insurance quality standard, • For each repair, you may be required to cut, trim, file, bend, or smooth parts to ensure proper standards are met, • Ensure quality control standards are met, • Adhering to assembly safety standards, • Work with team members to identify and develop improved methods of repair, • Comply with all safety standards and requirements to assure a safe and hazard-free warehouse environment with focus on injury prevention Skills and Experience • High school diploma or equivalent practical experience, • Hands on repair experience is a plus, • Hand on experience in these fields - Construction, Drywall, Painting, and Landscaping or a role where you had to pay close attention to quality and detail, • Strong focus on quality – deeply care about the product and your work, • High degree of professional credibility, including responsiveness, team focus, and interest and ability to perform work in a safe environment Physical Requirements • Must be able to stand/walk for up to 8-10 hours., • Lift and move totes up to 50 pounds., • Regular bending, lifting, stretching, and reaching both below the waist and above the head., • Should be able to work in environments with variable noise levels, lighting conditions and temperature variation and able to access all areas of building without limitations. Pay and Benefits • Competitive pay, • Medical, Dental, and Vision Insurance, • Paid Time Off, • Paid Company Holidays, • 401K About Us We specialize in remanufacturing auto lights and wheels and supplying high-quality aftermarket products in the collision and repair industry. We offer opportunities for career growth, competitive pay, benefits, paid time off, paid company holidays, paid training, and 401(k) with up to 5% match. For over 35 years, TERREPOWER has been a leader in sustainable manufacturing. Founded in 1987 in Daphne, Alabama by the Bigler family, TERREPOWER began as a small regional remanufacturer of starters and alternators. Our commitment to quality and innovation quickly earned us a reputation as a trusted name in the automotive industry. Today, TERREPOWER has expanded its footprint into over 90 countries and sustainably manufactures and supplies parts such as alternators, starters, EV batteries, solar solutions, auto lights and wheels, and more. TERREPOWER has expanded its footprint to over 90 countries. Why Join Us? When you join our team, you become part of a company that is redefining how essential products are made, reused and repurposed to reduce waste and maximize resources. Here’s what sets us apart: • Purpose-Driven Work – Every day, your work will contribute to extending the useful life of essential products, keeping vehicles on the road and critical systems running., • Innovative Mindset – We encourage creative problem-solving and bold ideas to push the boundaries of what is possible., • Global Reach, Local Impact – With operations in North America and Europe, we have a global presence but remain deeply connected to the communities we serve., • Growth & Development – Whether you’re on the production floor, in engineering, or part of our corporate team, we invest in your success through training, mentorship, and career advancement opportunities., • A Culture of Collaboration – Rooted in teamwork and shared values, our employees work together to tackle challenges and drive meaningful change. TERREPOWER is an Equal Opportunity Employer. We are committed to fostering an inclusive, diverse, and equitable workplace. We welcome applicants of all backgrounds and do not discriminate on the basis of race, color, sex, pregnancy, age, veteran status, religion, national origin, genetic information, disability unrelated to the ability to perform a job, sexual orientation, or transgender status to the extent protected by law. We believe that diversity drives innovation and success.

Job Description Job Title: Test Technician Job Description The Test Technician performs new product validation and manufacturing/production tests using Hydrothermal Liquefaction (HTL) procedures and specialized fixtures. This role focuses on executing test procedures, monitoring and improving testing processes and documentation, and ensuring the accuracy and reliability of test data and equipment. The technician contributes to product quality by identifying defects, analyzing test results, and supporting the development and maintenance of test fixtures and equipment. Responsibilities • Perform new product validation and manufacturing/production tests using Hydrothermal Liquefaction (HTL) procedures and fixtures., • Observe testing procedures to evaluate opportunities for process and documentation improvements., • Record test data accurately and prepare clear, written test reports., • Maintain required logs and records for all tests performed., • Visually examine and photograph parts and test products to identify functional defects and verify conformance to specifications., • Identify failures and analyze test results to detect potential problems and recommend possible solutions., • Perform maintenance and implement improvements to test equipment and computer systems to ensure data accuracy and reliability., • Assist in the development, design, and construction of test fixtures and test equipment., • Assist with or perform repairs on test tanks, pumps, manifolds, piping, and electronic, electrical, or mechanical components., • Assist with test and measurement equipment calibration verification., • Use precision measuring devices and test equipment to validate product performance., • Follow safety rules, operating instructions, and procedure manuals while working in a manufacturing environment. Essential Skills • Ability to read, understand, and use blueprints, schematics, and test procedures., • Knowledge of basic mechanical, electrical, and electronic systems., • Ability to effectively use a personal computer and associated software., • Electronics assembly and repair experience., • Proficiency in wiring and working with test equipment., • Ability to perform calibration and verification of test and measurement equipment., • Mechanical and electrical troubleshooting skills., • Ability to read and interpret schematics and technical drawings., • Language skills including the ability to read and comprehend instructions and interpret documents such as safety rules, operating instructions, and procedure manuals., • Ability to write clear reports and business correspondence., • Ability to effectively present information in one-on-one and small group situations to engineers, manufacturing employees, and other employees within the organization., • Mathematical skills including the ability to add, subtract, multiply, and divide in all units of measure using whole numbers, decimals, and fractions., • Reasoning skills including the ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to deal with problems involving several concrete variables in standardized situations., • For higher-level technicians (Grades 6 and 7), ability to solve non-routine problems., • Ability to effectively use various electronic, hand, and power tools and test equipment., • Ability to use precision measuring devices. Additional Skills & Qualifications • Experience working with Hydrothermal Liquefaction (HTL) procedures is beneficial., • Experience in a manufacturing or production test environment., • Comfort working with test tanks, pumps, manifolds, and piping., • Experience maintaining and improving test equipment and computer-based test systems., • Ability to visually inspect and photograph parts for documentation and quality purposes. Why Work Here? This opportunity offers a contract-to-hire path, providing the chance to demonstrate your skills and grow into a permanent role. Once hired on a permanent basis, you gain access to a comprehensive benefits package. You join a team-oriented environment where technical growth, hands-on work, and continuous improvement are encouraged, supporting long-term career development and stability. Work Environment This role is based in a manufacturing environment that involves regular hands-on work with mechanical, electrical, and electronic test equipment. The position requires frequent standing and walking, as well as using hands to finger, handle, or feel components and equipment, and reaching with hands and arms. You will regularly communicate with team members and occasionally sit, climb or balance, and stoop, kneel, crouch, or crawl as part of equipment inspection and repair activities. The role may require occasionally lifting and moving up to 50 pounds. Visual demands include close vision, distance vision, peripheral vision, and the ability to adjust focus to inspect parts, read schematics, and monitor test results. Job Type & Location This is a Contract to Hire position based out of Riverside, CA. Pay and Benefits The pay range for this position is $28.67 - $28.67/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Riverside,CA. Application Deadline This position is anticipated to close on Sep 28, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionMaintenance Manager with Heavy Robotic Welding Experience – Metal Stamping Location: Southern California | $120k - $130k + Relocation Assistance There is NO SPONSORSHIP being considered for this job role. If you need sponsorship NOW or in the FUTURE - PLEASE DO NOT APPLY. Great Company, Excellent Benefits, Multiple Direct / Indirect Reports, PTO / Vacation, 401k Match, Full Benefits, Relocation and More! We are a Large Metal Stamping, Tier 1 OEM Automotive Supplier. We are searching for a Seasoned Maintenance Manager, with 5 – 7 years of Metal Stamping Experience. Prefer someone with an Automotive Background, Large Press Line Experience, Transfer, Progressive, Single Action. Knowledge of Robotic Welding Assembly Cells, Spot, Mig, Tig, etc. Also, MUST HAVE Heavy Robotic Assembly Experience. We are offering a very competitive salary, for the Southern California area. Key Responsibilities: The key responsibilities and duties for this position include, but are not limited to: • Develop and maintain a plan and scheduled routine to perform preventive maintenance of equipment., • Manage, motivate, develop, and provide direct leadership to maintenance staff., • Perform inspections of recently maintained equipment to observe the quality of the maintenance performed and the operating condition of the equipment., • Create a work schedule for maintenance staff to include off-hours and annual shutdowns., • Manage and maintain work order system for parts management tracking and ensure that work order closure occurs. Required Qualifications: • 5 to 10 years of maintenance, electrical and/or mechanical experience., • Metal Stamping Press Experience, Single Action, Transfer, Progressive., • Heavy Robotic Welding Assembly, Mig, Tig, Spot / Resistance Welding., • Minimum of 3 years supervisory experience., • Training and development experience of crew members., • Excellent planning and leadership abilities. Preferred Qualifications: • Human-Machine Interface (HMI)., • Fanuc Robotics., • Automated Metal Assembly with Spot Welding., • Industrial Electric or PLC experience., • Bachelor’s degree in engineering, or combination of Trade School and experience. Benefits: • Relocation Assistance is Considered for the Right Candidate., • Sponsorship will be Considered for the Right Candidate., • Area: Great Hiking, Fishing, Hunting, Boating, Beach, Many Cultural Activities and more., • Salary Commensurate with Experience and Position Fit., • Major Medical, Dental, Vision – Starts 1st day of the Following Month after Start Date., • 401k Matching Program., • 2 Weeks Paid Vacation., • Holiday Pay., • PTO., • Travel: Minimal. This is a Company On-The-Move. NOW is the Time to Join. There are Numerous Upward Mobility and Advancement Opportunities!

Job DescriptionKelly is hiring Configuration Associates in Eastvale, CA! Shift: 6am-2:30pm Monday-Friday Pay: $19.50/hour About the Role We are looking for a detail-oriented Configuration Associate to join our electronics processing team. In this hands-on role, you will work with tablets used by fast food restaurants — sorting, inspecting, deconstructing, and assembling devices while maintaining accurate inventory records throughout every stage of the production process. Key Responsibilities Sortation • Sort electronic equipment and components into designated locations in preparation for diagnostic functional testing., • Identify visible malfunctions and defects during the sorting process., • Separate non-data bearing collateral from data-bearing devices for proper production routing., • Sort non-data bearing collateral into specified containers for downstream disposal., • Record device serial numbers, model information, and manufacturer details into the inventory system as process notes. Deconstruction • Manually deconstruct electronic equipment down to the component level., • Sort individual components designated for destruction into the appropriate containers., • Record all components removed for destruction accurately in processing notes. Assembly • Assemble electronic devices and sub-assemblies for finished good sales according to product specifications and production process instructions. As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Please note: The following benefits reflect Kelly's general offerings. Eligibility may vary by assignment, location, and job type. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

DHL - 16604 Slover Avenue - Responsibilities: Case picking and loading; Operate powered equipment: Pacer, Electric Pallet Jack, Reach Truck; Put-away and pick products for shipment; Load/unload and inspect products; Maintain clean and orderly facility and equipment.

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Syncreon - - Responsibilities: Move, organize, and track materials throughout the warehouse; Load and unload products safely and efficiently; Pick, pack, and prepare shipments; Support inventory accuracy and warehouse organization; Operate warehouse equipment (training provided as needed).

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Thermo Fisher Scientific - 1060 Citrus Street - Responsibilities: Receive, store, pick, and ship materials; Perform inbound receiving inspections; Inspect and store products in designated warehouse locations; Perform order picking and prepare shipments including inspections of sales orders and shipp

O'Reilly Automotive - - Responsibilities: Receive, unload, inspect, sort, stock, pick, pack, stage, and ship merchandise; Operate RF scanners, handheld devices, voice-picking systems, WMS; Maintain inventory accuracy and safety standards; Load and unload trailers and route trucks; Train team member

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Chevrolet Dealership - JobID: 200-188630 [Package Delivery Driver] As a Parts Delivery Driver at Chevrolet, you'll: Deliver parts and equipment to customers, other facilities and vendors in a timely manner; Pick up parts and equipment from customers, other facilities and vendors, to be coordinated w

Medspeed - - Responsibilities: Drive company vehicle to transport medical items; Perform pre/post-trip inspections; Load/unload items; Maintain professional appearance; Provide customer service to clients.

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Medical PPO high and low deductible plans / HSA options as well as HMO options in some markets FREE prescription plans Dental and Vision coverage Life insurance Disability Benefits Employee Assistance Plan Flex Spending plans, 401K matching Additional Critical Illness, Accident, and Hospital

Job Duties Local routes Delivery grocery store items/household goods No touch Live unload or drop and hook Driving Requirements 23+ years of age Valid CDL-A license DOT Medical Card FMCSA Clearinghouse registered and clear MVR Days 2 years of reefer trailer experience in the past 3 years Nights 2

Standard Delivery Driver Role Riverside, CA Join a Top Performing Delivery Team.Leading Edge Logistix, LLC is a locally owned and operated Amazon DSP dedicated to providing exceptional delivery service to our community.Location Address: DJT6 at 20920 Krameria Ave March Air Base Reserve, CA 92518.Ben

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Additional Job Details Stooping/Bending Forward bending at the waist is necessary at the pizza assembly station. Frequent and/or forceful pinching is required in the assembly of cardboard pizza boxes.

Hauling medicine and medical documents in plastic bins. Eligibility for health benefits, including medical, dental, and vision. In addition to monetary compensation, we offer a competitive benefits package that includes medical, dental, vision, life and AD&D, short-term disability, critical illness,

Riverside, California, RIVERSIDE PIZZA, INC.ABOUT THE JOB Do you know why Domino's Pizza hires so many drivers? Well, aside from the fact that our delicious pizza is the perfect solution for dinner for families all across the nation - we do it because we can.What do we mean by that, you ask? We mean

At US FOODS, our CDL A Delivery Truck Drivers start with a base hourly rate of $32.Once component pay begins, compensation shifts to a structure based on miles, cases, and stops, with hourly pay provided for any downtime.We are seeking Delivery Truck Drivers who are eager to challenge themselves, gr

Imperial Dade - 1865 Mountain View Avenue - Responsibilities: Deliver products to customer stops; Unload cargo using hand pallet jack and lift gate; Safely operate 24' box truck up to 25,999 GVW; Track and document activity log; Communicate with customers and provide good service.

Make up to $20 Plus an Hour with Tips!!!.If you enjoy working in a fun, high-energy environment with a growing company where the game is always on, we invite you to come join a team that is all about sports, great food, family, friends and then experience!.You will be responsible for taking orders a

Day 1 benefits: medical, dental, and vision insurance, FSA/HSA, and company-paid life insurance.

AdaptHealth - 3160 Chicago Avenue - Responsibilities: Deliver, set up, and support respiratory and home medical equipment; Educate patients and caregivers on safe use and troubleshooting; Respond to patient equipment issues and emergencies; Safely operate and maintain a company vehicle; Complete ord

Work At Home Focus Group Panel - Receptionist or Typist Welcome.Our company is looking for qualified candidates to take part in paid national and local focus groups, clinical trials, and market research studies.For most of our paid market research tasks, you can choose to participate either remotely

Medical, dental, vision insurance.

Market Research Panelist - Cashier, Warehouse Friendly.Our company is looking for qualified candidates to take part in paid national and local focus groups, clinical trials, and market research studies.For most of our paid market research tasks, you can choose to participate either remotely or in pe

Competitive Weekly Pay Comprehensive Benefits including medical, dental, and vision coverage.

We offer a comprehensive suite of benefits, which includes: All full-time employees (and family members) are eligible to participate in our Medical, Dental, and Vision plans Flexible Spending Accounts for Health and Dependent Care Short-Term Disability & Long-Term Disability Company Paid Basic Life

Big 5 - 245 North E Street - Responsibilities: Operate front counter POS system; Provide excellent customer service; Assist customers during entry and exit; Answer phone calls and respond to inquiries; Maintain clean, organized sales floor.

Responsibilities: Greet members and load orders onto conveyor; Assist cashier with item counts and scanning prep; Pack orders into boxes and move to cart/flatbed; Maintain cleanliness of front-end area; Assist in other departments as necessary.