Waste management jobs in Grand Rapids, MichiganCreate job alerts

POSITION SUMMARY: A Driver- CDL (B) is responsible for safely operating a collection truck, and providing prompt, courteous and complete waste removal services for customers. In addition, a Driver – CDL (B) is responsible for ensuring his or her vehicle is in compliance with the Company’s safety standards prior to operating the vehicle, ensures that all Company, state and federal regulations are adhered to at all times while operating the vehicle, and completes vehicle condition reports (“VCRs”) on a daily basis to ensure that any vehicle defects are repaired in a timely manner. PRINCIPAL RESPONSIBILITIES: • Perform complete pre- and post-operation inspection of the vehicle in accordance with Company policy to ensure tire pressure, fluid levels, safety equipment, gauges, and controls are in proper working order. Report any safety issues on standard reports., • Safely operate his or her heavy truck along his or her designated route and to the disposal site; read route sheet, follow map and service each customer as identified on the route sheet or as assigned by the dispatcher and/or supervisor., • Operate manual and/or automatic controls in accordance with Company safety policies and procedures to lift and load refuse, operate compactor and dispose of collected material at the designated facility., • Courteously interact with all customers, dispatchers and others on a daily basis to ensure all customer routes are serviced in a timely and professional manner., • Identify unsatisfactory waste containers and tag containers in accordance with applicable departmental procedures., • Continuously monitor waste for evidence of unacceptable waste., • Clean area around an accidental waste spill, ensuring adherence to all applicable safety standards and policies., • Continuously monitor the condition of the vehicle to ensure it is operationally ready at all times to minimize down time; clean waste from the packer blade and truck body (where appropriate) on each disposal trip., • Complete required route/productivity sheets, VCRs and other reports, as required., • Maintain adherence to required productivity standards for the department to ensure all customers are serviced in a timely and efficient manner., • Follow all required safety policies and procedures., • Actively participate in the Company’s ReSOP program., • Perform other job-related duties as assigned., • Good customer services skills to meet and exceed customer expectations; acts in a professional, courteous and cooperative manner toward customers and co-workers; works with a sense of honesty and trustworthiness., • Good time management skills to ensure assigned responsibilities are completed in an efficient and safe manner., • Good follow through ability; adheres to work schedule and follows through on challenges as they arise., • Ability to adhere to Company policies and rules set forth; promotes the Company’s safety standards; does not take inappropriate risks., • Maintains a feeling of pride in work; strives to achieve all goals. MINIMUM REQUIREMENTS: • Class B or higher Commercial Driver’s license with air brakes endorsement. Bonus Plan Details (if applicable): Rewarding Compensation and Benefits Eligible employees can elect to participate in: • Comprehensive medical benefits coverage, dental plans and vision coverage., • Health care and dependent care spending accounts., • Short- and long-term disability., • Life insurance and accidental death & dismemberment insurance., • Employee and Family Assistance Program (EAP)., • Employee discount programs., • 401(k) plan with a generous company match., • Employee Stock Purchase Plan (ESPP). The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company. Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law. ABOUT THE COMPANY Republic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world. In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills. Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer. Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it. Our company values guide our daily actions: • Safe: We protect the livelihoods of our colleagues and communities., • Committed to Serve: We go above and beyond to exceed our customers’ expectations., • Environmentally Responsible: We take action to improve our environment., • Driven: We deliver results in the right way., • Human-Centered: We respect the dignity and unique potential of every person. We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGY Republic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation. With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers. Recycling and Waste We continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs. Environmental Solutions Our comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need. SUSTAINABILITY INNOVATION Republic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth. The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America. We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028. RECENT RECOGNITION • Barron’s 100 Most Sustainable Companies, • CDP Discloser, • Dow Jones Sustainability Indices, • Ethisphere’s World’s Most Ethical Companies, • Fortune World’s Most Admired Companies, • Great Place to Work, • Sustainability Yearbook S&P Global

Crystal Clean (CC) is one of the nation’s leading privately held companies in the environmental waste services industry. We are seeking highly motivated individuals with a strong work ethic to join our rapidly growing company. Crystal Clean offers competitive compensation, excellent benefits, and opportunities for advancement. We are willing to provide complete training for this opportunity! Purpose: The Plant Operator is responsible for first and foremost, conducting his/her work in a safe manner at all times. Operators have the responsibility to make sure unit and process systems function properly. They continually monitor instrumentation and the operation of equipment and make adjustments to keep system process variables within acceptable ranges. Operators detect potential and actual problems and take corrective action to prevent the interruption of system operations. Essential Duties: • Responsible for working safely in all job aspects and functions., • Primary function to perform and record process field readings on all equipment, verifying control room readings, • Make adjustments to the process as directed by Facility Manager or Supervisor, • Perform bulk tank transfers as needed., • Update process logbooks with field activities and process adjustments, noting any variances, deviations, equipment malfunctions or environmental releases encountered during field readings., • Maintain and update process/safety/equipment reading/log sheets to record conditions., • Calculate process yields when necessary., • Assist with utility (boilers/cooling towers/compressors) operations and inspections., • Prepare process equipment for safe maintenance activities including following all Lock-out/Tag-out procedures., • Assist with Work Permitting preparations (Hot and Cold Work) including atmospheric testing., • Complete shift handover communications., • Maintain housekeeping standards in own work area, • Develop ways and means to operate more effectively., • Adhere to all corporate policies and standards including but not limited to environmental and regulatory, human resources, facility, equipment, operations and maintenance., • Participate in safety and other meetings. Other Duties • Other duties as assigned by management Specific Skills • Process Operations including operating rotating equipment, • Control equipment, • Boilers, Cooling Towers, Exchangers and Bulk Liquid Transfer, • Safe working experience., • Strong Mathematical and Mechanically reasoning ability, • The ability to work in team-based environment, • Attention to detail, • Good communication skills, • Proficiency in all Microsoft Office applications Work Experience • 2+ years of related experience Education, Certificates, Licenses, Designations or Memberships • High School Diploma or equivalent, • Vocational training preferred, • Experience in chemical processing environment preferred Personal Protective Equipment • Steel toe boots, Safety Glasses, Hard Hat, Respirator Requirements: All applicants must pass the company paid physical exam including substance abuse screening. Benefits: • Medical and Dental, • 401K, • Employee Stock Purchase Plan, • Paid time off, • Short-term disability, • Life and accident insurance, • Advancement opportunities Must be willing to undergo a background check in accordance with local laws and regulations. Crystal Clean LLC is an Equal Opportunity Employer. Crystal Clean expressly values diversity, equity, and inclusion, and encourages the applications of individuals from diverse backgrounds, so that Crystal Clean reflects the communities and customers that we serve. The anticipated hourly range for this position is $20.00 - $24.00, and includes benefits such as the following: • Health, Dental and Vision insurance, • Wellness Program, • Flexible Spending Accounts, • Life Insurance, • Long-Term Disability, • Employee Assistance Program, • Tuition Reimbursement

Crystal Clean (CC) is one of the nation’s leading privately held companies in the environmental waste services industry. We are seeking highly motivated individuals with a strong work ethic to join our rapidly growing company. Crystal Clean offers competitive compensation, excellent benefits, and opportunities for advancement. Position Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The following requirements are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Core Competencies: • Demonstrate proficiency at a wide variety of assignments, • Assist in the completion of industrial tank cleaning and hydro blasting projects, • Adheres to established schedules and deadlines, • Ability to effectively interact with management, other members of department and vendors, • Functions within established corporate and regulatory guidelines, • Excellent written and verbal communication abilities, • Present a positive image of Heritage-Crystal Clean to fellow employees, external contacts, and the public, • Clean driving record Work Experience: • No previous work experience required Education, Certificates, Licenses, or Designations: • High School Diploma or its equivalent, • Willing to get a CDL license Specific Skills: • Effective communication skills; both verbal and written, • Able learn and adapt to a new work environment, • Ability to use basic hand tools Work Environment: While performing essential duties of this position an individual will at times work at elevated heights and in confined spaces with moderate physical activity including, walking, climbing, and lifting objects up to 50 pounds. The position frequently requires work in outside weather conditions, including rain and extreme heat, near moving mechanical parts and includes occasional exposure to wet and/or humid conditions and to vibration. Individual will be required to wear protective equipment such as welding shields, hard hat, hearing protection and on an occasional basis, work with hazardous materials. Must be able to regularly talk, hear, see, and often reach with hands, stand, walk, use a computer keyboard, mouse, telephone, and other office equipment. Work hours will vary in length and schedule. Reasonable accommodations may be made to enable individuals with disabilities to perform essential duties. Crystal Clean LLC is an Equal Opportunity Employer. Crystal Clean expressly values diversity, equity, and inclusion, and encourages the applications of individuals from diverse backgrounds, so that Crystal Clean reflects the communities and customers that we serve. The anticipated hourly range for this position is $24.00 - $30.00, and includes benefits such as the following: • Health, Dental and Vision insurance, • Wellness Program, • Flexible Spending Accounts, • Life Insurance, • Long-Term Disability, • Employee Assistance Program, • Tuition Reimbursement

Crystal Clean (CC) is one of the nation’s leading privately held companies in the environmental waste services industry. We are seeking highly motivated individuals with a strong work ethic to join our rapidly growing company. Crystal Clean offers competitive compensation, excellent benefits, and opportunities for advancement. We are willing to provide complete training for this opportunity! Purpose: The Terminal Technician is responsible first and foremost with conducting his/her work in a safe manner at all times. Responsibilities include bulk transfer of material including Re-Refinery products, used oil, oily water and solvents to and from railcars, tankers and tanks. Essential Duties: • Unloading, loading and transferring of bulk materials to and from tankers, railcars and tanks in accordance with company rules and regulations., • Verifies receiving and shipping paperwork and directs transfers to appropriate tanks., • Emptying and filling drummed material as needed., • Operate forklift, yard truck and rail track mobile to support department activities., • Accurately completes activity logs documenting task status and completion., • Communicates with other shift members, supervisors and other shifts to ensure accurate transfer of information and safe operation., • Adhere to all corporate policies and standards including but not limited to environmental and regulatory, human resources, facility, equipment, operations and maintenance. Other Duties:, • Other duties as assigned by management. Specific Skills:, • Safe working experience., • Strong mechanical reasoning ability., • Ability to work in a team-based environment., • Attention to detail., • Good communications skills. Requirements:, • High School Diploma or its equivalent., • Valid driver’s license with clean motor vehicle record (required for forklift operation and/or operation of motorized equipment). Personal Protective Equipment:, • Ability to wear personal protective equipment, including respirator, steel toe boots, safety glasses, hard hat and any other PPE that may be required. Must be willing to undergo a background check in accordance with local laws and regulations. Crystal Clean LLC is an Equal Opportunity Employer. Crystal Clean expressly values diversity, equity, and inclusion, and encourages the applications of individuals from diverse backgrounds, so that Crystal Clean reflects the communities and customers that we serve. The anticipated salary range for this position is $20-$24/hr, and includes benefits such as the following: • Health, Dental and Vision insurance, • Wellness Program, • Flexible Spending Accounts, • Life Insurance, • Long-Term Disability, • Employee Assistance Program, • Tuition Reimbursement

Are you ready to lead with impact? Join us as a Maintenance Manager at our Wyoming, MI facility, where you’ll be a key member of our Plant Senior Leadership Team. This on-site role places you at the heart of strategic decision-making, driving reliability and performance across our operations. You’ll lead a high-performing maintenance team and collaborate across departments to deliver capital projects, implement improvement programs, and optimize plant processes. This is a dynamic opportunity to shape the future of our facility through innovation, leadership, and technical excellence. In this role, you’ll foster a culture of collaboration, respect, and continuous learning. You’ll champion lean manufacturing principles, oversee vertical project startups, and guide long-term capital planning—all while helping our team thrive and our operations remain sustainable and reliable. A Taste of What You’ll Be Doing • Project Leadership & Execution – Drive continuous technical improvement across equipment and production systems, ensuring projects meet objectives, budgets, and timelines., • Team Development & Management – Lead and develop a diverse team including supervisors, planners, mechanics, and electricians, while promoting skills training and performance excellence., • Lean Manufacturing & Innovation – Identify and implement cost-saving opportunities, eliminate waste, and introduce next-generation automation solutions., • Strategic Planning & Scorecard Ownership – Partner with Corporate Engineering to align technical strategies with plant goals and lead the Technical Center of Excellence to achieve key performance indicators., • Reliability & Budget Management - Collaborate with Operations to enhance reliability, manage departmental budgets, and develop long-term capital master plans. We’re Looking for Someone With • Managerial and technical experience in a plant environment, • Proven project management and budgeting skills, • Strong stakeholder relationship-building capabilities, • Experience leading technical teams, • Bachelor’s degree in engineering/technical field OR high school diploma/GED with extensive relevant experience The annual salary range is $102,300- $134,295, which is based on various factors such as location, experience and skill. Discretionary bonuses based on company and individual performance are also available. What’s Next Applications for this position will be accepted through October 10th, 2025 (spell out date - ex: June 1, 2024). After you apply, your application will be reviewed by a real recruiter, so it may take us a few weeks to get back with you by email or phone. Visit our ___ to get insights into our hiring process and more about what we offer. All applicants must have permanent legal authorization to work in the United States. Kellanova does not sponsor employment visas for this role. Need assistance throughout the application or hiring process? Email ___. Benefits include medical, dental, vision, life, accidental death & dismemberment insurance, employee assistance program, short-term disability coverage, and long-term disability insurance. Also, voluntary income protection benefits such as supplemental life, accident as well as a 401(k) plan with company contributions is available. Part-time employees may have access to benefits on a pro-rated basis.___ See ___ for more information. Get to Know Us At Kellanova, we are driven by our vision to be the world’s best-performing snacks-led powerhouse, unleashing the full potential of our differentiated brands and our passionate people. Our portfolio of iconic, world-class brands include Pringles, Cheez-It, Pop-Tarts, MorningStar Farms, Special K, Krave, Zucaritas, Tresor, Crunchy Nut, among others. Kellanova’s Culture of Best means we bring our best to all that we do in pursuit of our vision to be the world’s best performing snacks-led powerhouse. Our culture celebrates boldness and empowers our people to challenge the status quo, achieve results, and win together. Our focus on Equity, Diversity, and Inclusion (ED&I) enables us to build a culture of belonging where all employees have a place at the table and are inspired to share their passion, talents and ideas to work. Mars has agreed to acquire Kellanova in a combination that will shape the future of snacking! The transaction is anticipated to close towards the end of 2025 (subject to customary closing conditions, including regulatory approvals). The companies remain separate until closing. You can learn more at ___, and our hiring teams will be happy to discuss further questions if your application advances in the hiring process. Let’s shape the future of snacking. Kellanova is an Equal Opportunity Employer that strives to provide an inclusive work environment, a seat for everyone at the table, and embraces the diverse talent of its people. All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, disability, religion, national origin, gender, gender identity, gender expression, marital status, sexual orientation, age, protected veteran status, or any other characteristic protected by law. For more information regarding our efforts to advance Equity, Diversity & Inclusion, please visit our website ___.

Job DescriptionBenefits: • PTO, • Insurance, • Food and Beverage Discounts at all locations, • Bereavement All are conveniently located in the Uptown neighborhood on Wealthy Street. Food brings us together. Hospitality keeps us around. Authenticity and eclectic food and beverage innovation sets us apart. Our unique taste is paired with unparalleled customer service and a welcoming atmosphere. Sous Chef will have oversite of all kitchen operations for their concept of All In Hospitality Group. At Donkey, we are seeking someone who is bilingual with Spanish and English. They will work directly with the Chef de Cuisine and the General Manager to ensure concept success, profitability, guest relations, culture, food and beverage development, education, coaching and mentorship. Areas of Focus (including but not limited to): • Building and maintaining relationships with food vendors, • Focused on in-store food cost, inventory, and waste management, • Menu development alongside Chef de Cuisine and Culinary Director, • Mentorship and development with current in-house leadership and hourly staff, • Leading 1-1s, • Action plans for goal achievements, • Ensuring safety practices and handbook standards are being followed, • Working to maximize profitability in the kitchen, • Reviewing store inventory and variances, • Reviewing P&Ls and cost effectiveness, • Reviewing and controlling labor costs, • Creating and promoting healthy workplace culture and teamwork towards a communitive goal, • Interviewing and hiring kitchen leadership and hourly staff, • Ensuring efficiencies along facility layouts and in-house assets, • Developing and executing sales driving opportunities, • Running shifts daily to ensure guest service standards and efficient operationsRequirements:, • Minimum of 1 years current, salaried chef experience in a high-volume restaurant/bar, • Speaks fluent Spanish, • Strong organizational skills to manage the needs of the restaurant, • Detailed oriented, • Must be, or willing to be ServSafe complaint, • Communication skills to inspire and motivate consistency and excellence, • Strong belief in a professional and ethical approach to leading, motivating, and developing staff Reports To: Chef de Cuisine/ General Manager Pay: Salary Hours: 45-47 hours/week, you write your own schedule based on needs This job profile does not contain a comprehensive listing of all required activities, duties, or responsibilities. Job duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. If youre passionate about food, driven to provide exceptional service, and excited to be part of a dynamic team, wed love to hear from you!

Job DescriptionBenefits: • PTO, • Insurance, • Food and Beverage Discounts at all locations, • Bereavement All are conveniently located in the Uptown neighborhood on Wealthy Street. Food brings us together. Hospitality keeps us around. Authenticity and eclectic food and beverage innovation sets us apart. Our unique taste is paired with unparalleled customer service and a welcoming atmosphere. The Catering and Events Assistant General Manager will have oversite of all store operations for their concept of All In Hospitality Group - All In Catering Department. They will work directly with the Catering and Events General Manager to ensure concept success, profitability, guest relations, culture, food and beverage development, education, coaching and mentorship. Areas of Focus (including but not limited to): • Ensuring raving fan guest service at all times, • Act as the primary point of contact for clients to understand their catering needs and ensure exceptional customer service., • Work closely with chefs and kitchen staff to plan menus that align with client preferences, dietary restrictions, and event themes., • Manage logistics, including staffing, transportation, equipment, and venue setup/breakdown., • Maintain strong client relationships to encourage repeat business and positive word-of-mouth referrals., • Hiring and training of hourly staff, • Focused on in-store food/pour costs, inventory, and waste management, • Menu development alongside current in-house leadership, • Mentorship and development with current in-house leadership and hourly staff, • Leading 1-1s, • Action plans for goal achievements, • Ensuring safety practices and handbook standards are being followed, • Working to maximize profitability, • Reviewing store inventory and variances, • Reviewing P&Ls and cost-effectiveness, • Reviewing and controlling labor costs, • Creating and promoting healthy workplace culture and teamwork towards a communitive goal, • Ensuring efficiencies along facility layouts and in-house assets, • Running shifts daily to ensure guest service standards and efficient operations, • Responsible for all aspects of preparation, service, and cleanup/teardown for multiple catering operations, • Adapt, in a professional manner, to any situation that may occur at offsite or onsite events., • Build partnerships with venues, event planners, and other industry professionals to generate new business., • Attend networking events to expand market presence and identify growth opportunities.Requirements:, • Minimum of 1 year current, high volume catering experience, • Strong organizational skills to manage the needs of the restaurant, • Detailed oriented, • Must be, or willing to be ServSafe complaint, • Communication skills to inspire and motivate consistency and excellence, • Strong belief in a professional and ethical approach to leading, motivating, and developing staff This job profile does not contain a comprehensive listing of all required activities, duties, or responsibilities. Job duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. If youre passionate about food, driven to provide exceptional service, and excited to be part of a dynamic team, wed love to hear from you!

Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email Howmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit ___. Follow @howmet: Twitter, Instagram, Facebook, LinkedIn and YouTube. This off-shift position is located within our Plant 5 Hot Isostatic Press (HIP) Operation and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs. Job Roles • Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process, • Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract, • Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success, • Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business, • Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances, • Influence-- delegates effectively; capable of explaining the “why” behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively, • Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans, • Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a “finger on the pulse” of what occurs within the plant, • Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments., • Provides effective feedback to employees, both positive and negative. Maintains appropriate documentation for all disciplinary actions taken., • Provides training and mentoring to new Supervisors., • Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures., • Maintains compliance with the collective bargaining agreement. Interfaces between management and union officials. Handles grievances., • Ensures compliance with company policies, procedures, and practices., • Schedules production and work teams., • Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays., • Promotes EHS and continuous improvement initiatives and culture., • Implements ABS principles and initiatives and is the 6S program leader., • Interacts with their employees and other departments in order to manage the flow of product through the operation., • Maintains inventories, as applicable., • Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives. Enforces compliance and acts as a positive resource for information and questions., • Responds to emergencies. Assists in troubleshooting production problems. Investigates and analyzes. Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors., • Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc.)., • Reviews work procedures for safety regulations and concerns., • Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials., • Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment., • Performs audits for safety compliance; facilitates the 6S audit program., • Assists with budget and goal setting of the operation., • Complies with all EHS rules required for the work environment., • High School Diploma or GED from an accredited institution, • Minimum of 3 years leadership experience., • Experience supervising in a manufacturing environment., • Experience with TPM, Synchronous Mfg., and Kaizen Concepts., • Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented., • Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere.

Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email This off-shift position is located within our Plant 10 – Whitehall Casting Operation and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs. Job Roles • Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process, • Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract, • Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success, • Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business, • Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances, • Influence-- delegates effectively; capable of explaining the “why” behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively, • Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans, • Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a “finger on the pulse” of what occurs within the plant, • Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments., • Provides effective feedback to employees, both positive and negative. Maintains appropriate documentation for all disciplinary actions taken., • Provides training and mentoring to new Supervisors., • Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures., • Maintains compliance with the collective bargaining agreement. Interfaces between management and union officials. Handles grievances., • Ensures compliance with company policies, procedures, and practices., • Schedules production and work teams., • Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays., • Promotes EHS and continuous improvement initiatives and culture., • Implements ABS principles and initiatives and is the 6S program leader., • Interacts with their employees and other departments in order to manage the flow of product through the operation., • Maintains inventories, as applicable., • Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives. Enforces compliance and acts as a positive resource for information and questions., • Responds to emergencies. Assists in troubleshooting production problems. Investigates and analyzes. Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors., • Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc)., • Reviews work procedures for safety regulations and concerns., • Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials., • Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment., • Performs audits for safety compliance; facilitates the 6S audit program., • Assists with budget and goal setting of the operation., • Complies with all EHS rules required for the work environment., • High School Diploma or GED from an accredited institution, • Minimum of 3 years leadership experience., • Experience supervising in a manufacturing environment., • Experience with TPM, Synchronous Mfg., and Kaizen Concepts., • Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented., • Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere.

Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email Howmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit ___. Follow @howmet: Twitter, Instagram, Facebook, LinkedIn and YouTube. This off-shift position is located within our Plant 10 – Whitehall Casting Operation and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs. Job Roles • Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process, • Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract, • Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success, • Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business, • Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances, • Influence-- delegates effectively; capable of explaining the “why” behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively, • Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans, • Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a “finger on the pulse” of what occurs within the plant, • Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments., • Provides effective feedback to employees, both positive and negative. Maintains appropriate documentation for all disciplinary actions taken., • Provides training and mentoring to new Supervisors., • Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures., • Maintains compliance with the collective bargaining agreement. Interfaces between management and union officials. Handles grievances., • Ensures compliance with company policies, procedures, and practices., • Schedules production and work teams., • Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays., • Promotes EHS and continuous improvement initiatives and culture., • Implements ABS principles and initiatives and is the 6S program leader., • Interacts with their employees and other departments in order to manage the flow of product through the operation., • Maintains inventories, as applicable., • Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives. Enforces compliance and acts as a positive resource for information and questions., • Responds to emergencies. Assists in troubleshooting production problems. Investigates and analyzes. Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors., • Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc)., • Reviews work procedures for safety regulations and concerns., • Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials., • Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment., • Performs audits for safety compliance; facilitates the 6S audit program., • Assists with budget and goal setting of the operation., • Complies with all EHS rules required for the work environment., • High School Diploma or GED from an accredited institution, • Minimum of 3 years leadership experience., • Experience supervising in a manufacturing environment., • Experience with TPM, Synchronous Mfg., and Kaizen Concepts., • Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented., • Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere.

Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email Howmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit ___. Follow @howmet: Twitter, Instagram, Facebook, LinkedIn and YouTube. This off-shift position is located within our Plant 3 and will direct and motivate the manufacturing work force to produce products of high quality in the most efficient and safe manner and ensure that scheduling meets business and customer needs. Job Roles • Anticipation--asks questions to understand needs of multiple stakeholder groups; prepares operation for optimal execution; contributes as a strategic partner to planning process, • Reliability--leads by example; provides goal and measurement information to others; facilitates safe environment; works effectively within parameters of bargaining unit contract, • Optimizer--improves processes; executes production for maximal output; eliminates waste; increases quality; aligns activity and resources to desired outcomes; sets others up for success, • Facilitator--interacts with internal and external stakeholders at multiple levels; furnishes accurate instructions to others; acts as liaison between planning, management and execution elements of the business, • Responsiveness--deals effectively with the unforeseen; modifies labor schedule or other variables as needed based on circumstances, • Influence-- delegates effectively; capable of explaining the “why” behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively, • Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans, • Observation--sees and hears through the lens of performance; enables accuracy in scheduling, quality in production and relationship with customers; makes recommendations and changes based on patterns and data; monitors for feedback and communicates findings; sees physical and personnel issues and acts on observations; has a “finger on the pulse” of what occurs within the plant, • Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments., • Provides effective feedback to employees, both positive and negative. Maintains appropriate documentation for all disciplinary actions taken., • Provides training and mentoring to new Supervisors., • Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures., • Maintains compliance with the collective bargaining agreement. Interfaces between management and union officials. Handles grievances., • Ensures compliance with company policies, procedures, and practices., • Schedules production and work teams., • Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays., • Promotes EHS and continuous improvement initiatives and culture., • Implements ABS principles and initiatives and is the 6S program leader., • Interacts with their employees and other departments in order to manage the flow of product through the operation., • Maintains inventories, as applicable., • Creates a total awareness among assigned employees of Company policies, regulations, procedures, and business initiatives. Enforces compliance and acts as a positive resource for information and questions., • Responds to emergencies. Assists in troubleshooting production problems. Investigates and analyzes. Initiates or recommends actions to correct deviations and variables affecting schedules, costs, quality, and other factors., • Prepares and analyzes documentation as required (i.e. production reports, log sheets, etc.)., • Reviews work procedures for safety regulations and concerns., • Plans, develops, and implements new methods and procedures designed to improve operations, minimize operating costs, and effect greater utilization of labor and materials., • Confers with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment., • Performs audits for safety compliance; facilitates the 6S audit program., • Assists with budget and goal setting of the operation., • Complies with all EHS rules required for the work environment., • High School Diploma or GED from an accredited institution, • Minimum of 3 years leadership experience., • Experience supervising in a manufacturing environment., • Experience with TPM, Synchronous Mfg., and Kaizen Concepts., • Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented., • Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere.

Job Description JOB SUMMARY Supervises, directs, and controls assigned shifts by established policies, procedures, and standards. Participates in discussions and decisions affecting assigned restaurants and supports the goals, plans, and priorities of the General Manager. The Assistant Manager is accountable for the successful operation, growth, and prosperity of an assigned Fazoli’s Restaurant through the execution of People.Sales.Profit. PRIMARY DUTIES: PEOPLE: Assists the General Manager in developing the restaurant team succession and bench strength utilizing the Company’s internal development processes to ensure operational standards and team performance. SALES: Works directly with the General Manager in building professional business relationships and partnerships within the community. Seeks to build in-house and off-premises sales executing approved marketing plans and operations under the direction of the General Manager. PROFIT: Assists the General Manager with impeccable integrity by maintaining, utilizing, and enforcing effective management practices, policies, controls, tools, and systems that enhance efficiency and productivity, minimize waste and loss, and promote a safe, secure work environment for Guests, Team Members and Investors alike. ATTRIBUTES OF SUCCESS: ● Ability to communicate effectively, both verbally and in writing, to an array of diverse internal and external clients. Ability to listen effectively, process information quickly and accurately, and transfer knowledge in a variety of settings, including one-on-one, small groups, and meetings. Ability to get things done with and through other people. ● Assist the General Manager with planning and implementation of multiple strategies and tasks simultaneously while directed by the General Manager. For example: required checklists, daily line checks, and routine maintenance. ● Self-driven with the ability to work independently and alongside the management team to execute ideas to combat risks and enhance opportunities. ● Possess basic computer skills. ● Possesses an entrepreneurial spirit, competitive nature, and contagious enthusiasm that drive team performance to achieve desired results. The above statements are intended to describe the general nature, type, and level of work being performed by the Employee(s) functioning in this job. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified nor should they be construed as limiting the Company’s right to modify the duties of the job. QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Minimum Age: 18 years of age. Experience and Training: External Candidates: Minimum 1-year previous Assistant Manager experience required. Fast casual/quick service experience preferred, but not required. Internal Candidates: 6 months of experience as a successful Fazoli’s Associate Trainer on the recommendation of your current General Manager. Development readiness checklist completed. All Candidates: Must complete all required Fazoli’s training and certifications including SERV Safe. Must be available a minimum of 30 hours per week, unless you are enrolled in school. A leave of absence request will be required. Must submit to a routine and periodic background, motor vehicle report, and reference checking processes. WORK CONDITIONS The physical demands described herein are representative of those that must be met by a team member to successfully perform the essential function of this job with or without reasonable accommodation. The work is typically performed in a restaurant environment, with moderate noise. While performing the duties of this job, the team member is regularly required to stand, walk, sit, bend, and talk and/or hear. Team members frequently are required to use their hands to finger, handle, or feel and reach with hands and arms. Team members must regularly lift and/or move up to 50 pounds. Hazards: The hazards are only those present in a normal restaurant setting or while traveling by car on Company business.

Job Description JOIN A GREAT TEAM! We are seeking a dynamic and experienced Restaurant Manager in Grand Rapids, MI to oversee the daily operations of our sports bar. We have 2 locations, amazing food, and a outstanding staff. As the Restaurant Manager, you will ensure exceptional customer service, a seamless dining experience, and the overall success of the bar and restaurant operations. You will be responsible for managing staff, inventory, customer satisfaction, and ensuring the establishment runs smoothly in a fast-paced and energetic environment. Key Responsibilities: • Operational Oversight: Manage the daily operations of the sports bar, ensuring smooth and efficient service., • Staff Management: Hire, train, and supervise staff including servers, bartenders, cooks, and support staff. Ensure proper staffing levels and foster a positive and productive work environment., • Customer Service Excellence: Ensure an exceptional customer experience by addressing any concerns or complaints promptly and professionally. Create a welcoming and energetic atmosphere for guests., • Inventory Management: Monitor and maintain inventory levels, order supplies, and ensure stock is organized and maintained. Control waste and prevent theft., • Financial Management: Manage budgets, costs, and financial performance. Prepare and track sales, manage profit margins, and ensure cost-effective practices., • Compliance: Ensure that all food safety, health regulations, and alcohol laws are adhered to. Conduct regular safety and cleanliness audits., • Event Coordination: Coordinate sports events, special promotions, and themed nights to increase customer engagement and traffic., • Marketing & Promotions: Work with the marketing team to promote specials, events, and seasonal offers. Utilize social media and other platforms to drive business., • Reporting & Communication: Maintain regular communication with the ownership and corporate team, providing updates on performance, issues, and opportunities for improvement. Qualifications: • Proven experience in restaurant management, preferably in a sports bar or high-volume environment., • Strong leadership and team management skills., • Excellent communication and interpersonal skills., • Ability to multitask and thrive in a fast-paced environment., • Solid understanding of restaurant operations, including inventory, budgeting, and financial performance., • Knowledge of food and beverage offerings, with a passion for sports culture., • Availability to work nights, weekends, and holidays as needed., • Proficient in POS systems and Microsoft Office Suite., • ServSafe certification or equivalent food safety training (preferred).

Job Description What began as an idea between two brothers to open a Mexican restaurant has since grown into one of the largest, privately held Taco Bell franchisees in America. At Border Foods, we work with a people-first mantra. From cooks to cashiers to restaurant managers and beyond, we work together to bring to life the Core Values of Border Foods. Welcome to our family where you will continue to learn, evolve, and shape what comes next on our mission of making lives better. As a General Manager your mission is to reinforce the Border Foods CORE values, to include Accountability, Integrity, Family, Excellence, Teamwork, and Empowerment. At Border Foods, we will unlock the full potential of our employees and guest’s restaurant experience by creating safe welcoming and supportive environments where everyone can thrive. The purpose of the General Manager is to make the lives of the employees and the guests better by creating opportunities to positively impact life experiences. You are responsible for the operation of the entire restaurant and building a strong team that consistently provides customers great food and a friendly experience. What’s in it for you? • -Top pay in the industry: Make up to $100,000 a year with base pay plus top-tier bonus potential., • -Trip to Mexico! Every year, we reward our top performers on our Best of the Best trip to Mexico. In 2020, we’ll be taking 85 General Managers!, • -Bonus program! General Managers have the potential to make up to an extra forty thousand dollars annually in bonus alone., • -Education programs, including GED and Tuition Reimbursement offerings, • -Scholarship opportunities, • -Medical/Dental/Vision benefits offered for all positions – even part-time!, • -Free food!, • -Vacation Time (Paid Time Off), Sick, and Holiday Pay, • -Vacation Donation Program, • -An incredible culture that encourages career growth and support General Manager Core Values: Accountability & Integrity: • Consistently demonstrates integrity in actions and expectations, • Guides team members and Shift Leaders, ensuring they complete all assigned duties and serve safe, quality food in a friendly manner, • Scheduling and deploying the Team correctly, • Monitors the performance of each Team Member and hold them accountable for standards and expectations., • Ensures a quality customer experience by driving fast and friendly service, • Maintains point of sale system by reporting all system failures and verifies download accuracy (e.g. pricing updates, menu changes)., • Ensure health and safety standards are met, • Creates unity in the team by building cross functional relationships, • Respond to Team Member questions and resolves employee issues in a timely manner., • Provide a restaurant that is a safe place for team members to work and customers to visit, • Able to navigate challenging situations and provide appropriate guidance, • Motivates and supports the team through active listening and the ability to communicate to a wide variety of audiences, • Represents Border Foods in handling customer complaints and/or issues; demonstrating a sincere approach and desire to find an effective solution., • Strategic planner creates short term and long-term strategies for restaurant success, • Delivers profit by utilizing and interpreting the P&L in order to make the appropriate financial adjustments, • Sourcing, hiring, and developing excellent Team Members, • Conducting New Hire orientation and developing the training plan for each new hire, • Minimizes loss through strict observance of cash handling policies, proper training of Team Members, and complying with all accounting/banking requirements., • Builds the capabilities of their team while identifying teams’ strengths and opportunities, • Provides learning and development opportunities for all Team Members., • Offers guidance to Team Members regarding personal development opportunities and career path., • Consistently demonstrates active and timely coaching capabilities., • Seeks and shares ideas to help others succeed creating and leveraging tools, resources, and information that fosters personal and business growth., • Minimum of three years restaurant or retail experience, or combined experience and education., • Experience with sales building, P&L statements, recruiting, and training., • Proven track record of successful hiring and retention., • Required when needed, the ability to work early morning, evenings, late night, weekends, and some holidays. Schedule demands may change., • ServeSafe Certified, • Must be at least 18 years of age., • Valid Driver’s license and vehicle insurance., • -Top pay in the industry, • -Trip to Mexico! Every year, we reward our top performers on our Best of the Best trip to Mexico. In 2020, we’ll be taking 85 General Managers!, • -Bonus program! General Managers have the potential to make up to an extra forty thousand dollars annually in bonus alone., • -Education programs, including GED and Tuition Reimbursement offerings, • -Scholarship opportunities, • -Medical/Dental/Vision benefits offered for all positions – even part-time!, • -Free food!, • -Vacation Time (Paid Time Off), Sick, and Holiday Pay, • -Vacation Donation Program The physical demands for this position are sits, stands, bends, lifts, and moves intermittently during working hours. These physical requirements may be accomplished with or without reasonable accommodation. The duties of this position may change from time to time. Border Foods reserves the right to add or delete duties and responsibilities at the discretion of Border Foods or its managers. This job description is intended to describe the general level of work being performed. It is not intended to be all-inclusive. Border Foods is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and individuals with Disabilities and does not discriminate based on gender identity or sexual orientation. “You are applying for work with a franchisee of Taco Bell, not Taco Bell Corp. or any of its affiliates. If hired, the franchisee will be your only employer. Franchisees are independent business owners who set their own wage and benefit programs that can vary among franchisees.” $50000 per year - $100000 per year #taco

Job Description JOB SUMMARY The General Manager has ultimate accountability for the successful operation, growth and prosperity of an assigned Fazoli’s Restaurant through the execution of People.Sales.Profit. PRIMARY DUTIES: PEOPLE: Attracts, interviews, selects and onboards the restaurant team. Develops the restaurant team succession and bench strength utilizing the Company’s internal development processes, performance management and other internal systems to ensure operational standards, team performance and corresponding financial goals and needs of the organization are met. SALES: Builds professional business relationships and partnerships within the community and parlays such relationships into mutually beneficial business opportunities. Participates in community affairs that build brand awareness and reflect favorably on the Company as a corporate neighbor and citizen. Seeks to build in-house and off-premise sales executing approved marketing plans. PROFIT: Administers all aspects of the business with impeccable integrity maximizing restaurant profitability by instituting, maintaining, utilizing and enforcing effective management practices, policies, controls, tools and systems that enhance efficiency and productivity, minimize waste and loss, and promote a safe, secure work environment for Guests, Team Members and Investors alike. ATTRIBUTES OF SUCCESS: ● Ability to communicate and recruit effectively, both verbally and in writing, to an array of diverse internal and external clients. Ability to listen effectively, process information quickly and accurately, and transfer knowledge in a variety of settings, including one-on-one, small groups and meetings. Ability to get things done with and through other people. ● Possesses thorough knowledge and understanding of general business and financial principles, including but not limited to profit and loss statements, controllable profit, drop-through, revenue generation, and budgeting. ● Ability to plan, prioritize, anticipate, analyze and implement multiple strategies and tasks simultaneously within budget and on schedule. For example: succession planning, restaurant maintenance, marketing plans. ● Ability to work independently with minimal supervision. Call upon experience and leadership skills to assess opportunities and risks. ● Possesses an entrepreneurial spirit, competitive nature and contagious enthusiasm that drive team performance to achieve desired results. The above statements are intended to describe the general nature, type and level of work being performed by the Employee(s) functioning in this job. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified nor should they be construed as limiting the Company’s right to modify the duties of the job. QUALIFICATIONS: Education: High school diploma or G.E.D. equivalent. Minimum Age: 18 years of age and must possess a valid driver’s license Experience and Training: External Candidates: Minimum of 3 years previous General Manager experience required. Fast-casual/quick service experience preferred, but not required. Internal Candidates: 1+ years of experience as a successful Fazoli’s Assistant General Manager with the recommendation of your current General Manager and Area Supervisor. Development readiness checklist completed. All Candidates: Must successfully complete all required Fazoli’s training and certifications including SERV Safe. Must be available to work all hours of restaurant operations. The weekly schedule would consist of 8 meal periods which would include 2 of 3 Friday night, Saturday night and Sunday lunch and 55% of the sales. Must have the flexibility to transfer and/or assist at other Fazoli’s restaurants as business needs arise. Must provide a safe and secure work environment by maintaining all Safety & Security policies in place for the protection of all team members, guests and physical assets of Fazoli’s. Must successfully clear routine and periodic background, motor vehicle report and reference checking processes. WORK CONDITIONS The physical demands described herein are representative of those that must be met by a team member to successfully perform the essential function of this job with or without reasonable accommodation. The work is typically performed in a restaurant environment, with moderate noise. While performing the duties of this job, the team member is regularly required to stand, walk, sit, bend, and talk and/or hear. Team members frequently are required to use hands to finger, handle or feel and reach with hands and arms. Team members must regularly lift and/or move up to 50 pounds. The Company reserves the right to request a transfer to another restaurant based upon the needs of the business, mileage reimbursement applies if outside a 25-mile radius from your home restaurant. Hazards: The hazards are only those present in a normal restaurant setting or while traveling by car on Company business.

Job Description Maintenance Technician Tier II (1st Shift) Are you looking for a challenging yet rewarding job that allows you to utilize your skills to their fullest potential? Do you want to join a team of hardworking, enthusiastic, and creative people and enjoy working with a company that recognizes and embraces diversity? Do you take pride in working with a company that is committed to being a great corporate citizen and playing a role in producing the highest quality products and services? If you answered yes to any of these questions, then Pridgeon and Clay is the place for you... Founded in 1948 by John Pridgeon and Donald Clay, we are one of the largest independent, value-added manufacturers and suppliers of automotive stamped and fine-blanked components in the United States. Objective: The Maintenance Technician Tier 2 solves equipment-related manufacturing challenges, maximizing equipment efficiency to achieve team goals in an exemplary manner according to the company quality policies. Qualified candidates will possess the following Minimum Requirements: • High school diploma or GED, • Completion of an Associate's Degree in Industrial Maintenance Technology (or similar program), completion of a college-based or apprenticeship-based Maintenance Technology or Technician program or certificate, • Ability to train, teach, and assess other Maintenance Technician trainees, leading and mentoring in a team environment, • Experience in machine repair of metal stamping equipment, spot/resistance welding equipment, robotic welders, or grinding and finishing equipment, • Experience in operating all "tools of the trade" including welding, mills, lathes, cutting equipment, metal shear and brake, and drill presses, • Ability to assist with managing projects and resources effectively, including PLC programming and troubleshooting, understanding advanced electrical prints and schematics to facilitate complex repairs or installation of equipment, • Ability to read, follow and understand electrical, mechanical, hydraulic and pneumatic drawings, blueprints, schematics, code requirements, service manuals and manufacturers' specifications, • Welding, layout and construction skills including art, MIG, TIG aluminum, TIG steel, and oxy-acetylene welding along with the use of the plasma cutter, • Proven mechanical inclination and general math and manufacturing knowledge through standardized tests, • Computer literacy, • Excellent interpersonal skills, • Ability to lift 50 pounds Standard Work/Preventative Maintenance: • Provide technical (mechanical, electrical, pneumatic/hydraulic) expertise to production teams to assist in creating and implementing the best solutions to manufacturing challenges., • Use drawings/blueprints, schematic diagrams, service manuals, code manuals, and manufacturer's specifications to mechanically install, modify, enhance, and repair machines and mechanical equipment., • Use basic PC/PLC knowledge and electrical schematics to electrically install, modify, enhance and repair machines and mechanical equipment., • Read and interpret hydraulic, pneumatic, and machine manuals, and basic interpretation of electrical schematics., • Read and interpret electrical schematics and machine manuals to perform safe and effective repairs while using basic electrical concepts, practices, and theory., • Operate lathes, mills, plasma cutters, and cutting equipment to fabricate/repair machine/mechanical equipment parts., • Perform MIG, TIG aluminum, TIG steel, and oxy/acetylene welding to install, modify, enhance, repair, and maintain business unit equipment and to fabricate and repair parts., • Troubleshoot various equipment throughout production including metal stamping equipment, spot/resistance welding equipment, robotic welders, and grinding and finishing equipment, • Continually increase technical knowledge and knowledge of alternative work methods to enhance the accuracy and efficiency of machinery. This may be accomplished through internal or external training classes and/or seminars., • Continually share and gain knowledge from co-workers to enhance guidance, training, and utilization of best practices and use the knowledge gained to improve equipment uptime., • Complete appropriate paperwork, including machine documentation, panel documentation, and preventive maintenance records to ensure adequate documentation needed to enhance the elimination of equipment downtime., • Document hours and work activity daily in record-keeping system-Electronic Asset Management (EAM)., • Identify and attempt to eliminate areas of waste for better efficiency and overall production needs., • Continually share and gain knowledge from co-workers to enhance guidance, training, and utilization of best practices and use the knowledge gained to improve equipment uptime., • Participate in, and support lean initiatives such as continuous improvement events and problem solving events, identifying and eliminating all types of waste, • Suggest and implement ideas to increase personal and departmental efficiency. Communicate potential cost savings to other Technicians and Team Leaders., • Ensure that equipment preventative maintenance and repairs are done to quality standards., • Consistently adhere to, and support, company policies and procedures, including ISO, TS 16949 and safety regulations., • Follow all safety procedures, including MIOSHA regulatory requirements regarding machinery and Personal Protective Equipment (PPE), controls, safety devices, lock-out/tag-out, use of coolants, and die block procedures., • Identify potential safety issues and take appropriate action. Ensure environment is free of avoidable risks, and report concerns immediately, taking appropriate action to immediately rectify and resolve., • Effectively communicate with co-workers and management personnel to enhance teamwork and communication initiatives., • Provide necessary, accurate, and timely feedback on all pertinent information to co-workers and management., • Consistently exhibit appropriate attendance habits, working the hours necessary to perform the job., • Organize and maintain the efficiency of the personal work area., • Consistently adhere to, and support, company policies and procedures, including ISO, IATF 16949, and safety regulations., • Positively accept instructions and duties., • Pick up and deliver product to suppliers and customers, as needed., • Treat all co-workers with dignity and respect., • Exhibit all the attributes of a positive role model (including professionalism, personal integrity, and positive attitude) for employees and managers to emulate., • A competitive total compensation including a comprehensive benefit plan including premium medical and prescription coverage starting at just $5.00 per week for employee coverage, dental, vision, 401(k) with company match, and tuition reimbursement., • A safe, team-oriented work environment with a leadership team that treats you like family and values your input, • An opportunity to participate in shaping the success of the organization through continuous improvement and problem-solving events, • A positive work/life balance, • An opportunity for career growth - Over 70% of our leaders have been promoted from within Job Posted by ApplicantPro

Job DescriptionSalary: $70-80k Join a Leading Industry Name in an Exciting Growth Phase! Position Overview: We are seeking a skilled Truck and Trailer Maintenance Mechanic to join our team and play a vital role in the repair, maintenance, and management of our truck and trailer fleet. This position is crucial for ensuring optimal safety and efficiency in our operations. Key Responsibilities: • Execute electrical and mechanical maintenance tasks for trucks and trailers., • Collaborate with drivers to diagnose equipment issues and perform necessary repairs., • Replace tires as required while ensuring compliance with safety standards., • Carry out preventative maintenance according to established schedules and document all findings., • Identify opportunities to enhance equipment performance and recommend improvements., • Uphold 5-S standards to maintain a clean, organized, and safe work environment., • Suggest initiatives to improve working conditions and boost shop efficiency., • Follow company policies and safety regulations diligently., • Assist with janitorial, landscaping, and waste removal tasks as necessary. Qualifications: To thrive in this role, candidates should possess the following: Experience & Education: • 2-4 years of experience in truck and trailer maintenance or a relevant combination of education and experience., • Strong problem-solving abilities with the capability to interpret written, oral, and diagrammatic instructions., • Ability to navigate issues involving multiple variables in standardized environments., • Physical stamina to stand or walk for extended periods and perform tasks such as stooping, kneeling, crouching, or crawling., • Capacity to occasionally reach with hands and arms, with the ability to lift/move up to 25 lbs frequently and up to 40 lbs occasionally., • Familiarity with ISO 9001:2015 Clauses 7.1.3 and 7.1.4 is an asset, though not essential., • Engagement in safety and quality training programs, including Lockout Tagout, PPE, Forklift operation, Emergency Procedures, and Preventative Maintenance. Join us and be part of our journey as we expand and enhance our industry presence!

Job Description Are you looking for a challenging yet rewarding job that allows you to utilize your skills to their fullest potential? Do you want to join a team of hardworking, enthusiastic and creative people and enjoy working with a company that recognizes and embraces diversity? Do you take pride working with a company that is committed to being a great corporate citizen and playing a role in producing the highest quality products and services? If you answered yes to any of these questions, then Pridgeon and Clay is the place for you... Founded in 1948 by John Pridgeon and Donald Clay, we are one of the largest independent, value-added manufacturers and suppliers of automotive stamped and fine-blanked components in the United States. Objective: The Maintenance Technician Tier 2 solves equipment-related manufacturing challenges, maximizing equipment efficiency to achieve team goals in an exemplary manner according to the company quality policies. Qualified candidates will possess the following Minimum Requirements: • High school diploma or GED, • Completion of an Associate's Degree in Industrial Maintenance Technology (or similar program), completion of a college-based or apprenticeship-based Maintenance Technology or Technician program or certificate, • Ability to train, teach, and assess other Maintenance Technician trainees, leading and mentoring in a team environment, • Experience in machine repair of metal stamping equipment, spot/resistance welding equipment, robotic welders, or grinding and finishing equipment, • Experience in operating all "tools of the trade" including welding, mills, lathes, cutting equipment, metal shear and brake, and drill presses, • Ability to assist with managing projects and resources effectively, including PLC programming and troubleshooting, understanding advanced electrical prints and schematics to facilitate complex repairs or installation of equipment, • Ability to read, follow and understand electrical, mechanical, hydraulic and pneumatic drawings, blueprints, schematics, code requirements, service manuals and manufacturers' specifications, • Welding, layout and construction skills including art, MIG, TIG aluminum, TIG steel, and oxy-acetylene welding along with the use of the plasma cutter, • Proven mechanical inclination and general math and manufacturing knowledge through standardized tests, • Computer literacy, • Excellent interpersonal skills, • Ability to lift 50 pounds Standard Work/Preventative Maintenance: • Provide technical (mechanical, electrical, pneumatic/hydraulic) expertise to production teams to assist in creating and implementing the best solutions to manufacturing challenges., • Use drawings/blueprints, schematic diagrams, service manuals, code manuals, and manufacturer's specifications to mechanically install, modify, enhance and repair machines and mechanical equipment., • Use basic PC/PLC knowledge and electrical schematics to electrically install, modify, enhance and repair machines and mechanical equipment., • Read and interpret hydraulic, pneumatic, machine manuals, and basic interpretation of electrical schematics., • Read and interpret electrical schematics and machine manuals to perform safe and effective repairs while using basic electrical concepts, practices, and theory., • Operate lathes, mills, plasma cutters and cutting equipment to fabricate/repair machine/mechanical equipment parts., • Perform MIG, TIG aluminum, TIG steel, and oxy/acetylene welding to install, modify, enhance, repair, and maintain business unit equipment and to fabricate and repair parts., • Troubleshoot various equipment throughout production including metal stamping equipment, spot/resistance welding equipment, robotic welders, and grinding and finishing equipment, • Continually increase technical knowledge and knowledge of alternative work methods to enhance the accuracy and efficiency of machinery. This may be accomplished through internal or external training classes and/or seminars., • Continually share and gain knowledge from co-workers to enhance guidance, training, and utilization of best practices and use the knowledge gained to improve equipment uptime., • Complete appropriate paperwork, including machine documentation, panel documentation, and preventive maintenance records to ensure adequate documentation needed to enhance the elimination of equipment downtime., • Document hours and work activity daily in record-keeping system-Electronic Asset Management (EAM)., • Identify and attempt to eliminate areas of waste for better efficiency and overall production needs., • Continually share and gain knowledge from co-workers to enhance guidance, training, and utilization of best practices and use the knowledge gained to improve equipment uptime., • Participate in, and support lean initiatives such as continuous improvement events and problem solving events, identifying and eliminating all types of waste, • Suggest and implement ideas to increase personal and departmental efficiency. Communicate potential cost savings to other Technicians and Team Leaders., • Ensure that equipment preventative maintenance and repairs are done to quality standards., • Consistently adhere to, and support, company policies and procedures, including ISO, TS 16949 and safety regulations., • Follow all safety procedures, including MIOSHA regulatory requirements regarding machinery and Personal Protective Equipment (PPE), controls, safety devices, lock-out/tag-out, use of coolants, and die block procedures., • Identify potential safety issues and take appropriate action. Ensure environment is free of avoidable risks, and report concerns immediately, taking appropriate action to immediately rectify and resolve., • Effectively communicate with co-workers and management personnel to enhance teamwork and communication initiatives., • Provide necessary, accurate, and timely feedback of all pertinent information to co-workers and management., • Consistently exhibit appropriate attendance habits, working the hours necessary to perform the job., • Organize and maintain efficiency of personal work area., • Consistently adhere to, and support, company policies and procedures, including ISO, IATF 16949, and safety regulations., • Accept instructions and duties in a positive manner., • Pick up and deliver product to suppliers and customers, as needed., • Treat all co-workers with dignity and respect., • Exhibit all the attributes of a positive role model (including professionalism, personal integrity, and positive attitude) for employees and managers to emulate., • A competitive total compensation including a comprehensive benefit plan including premium medical and prescription coverage starting at just $5.00 per week for employee coverage, dental, vision, 401(k) with company match, and tuition reimbursement., • A safe, team oriented work environment with a leadership team that treats you like family and values your input, • An opportunity to participate in shaping the success of the organization through continuous improvement and problem solving events, • A positive work/life balance, • An opportunity for career growth - Over 70% of our leaders have been promoted from within Job Posted by ApplicantPro

When you join Sunrise Senior Living, you will be able to use your unique skills to empower residents to live longer, healthier, and happier lives. Not only will you build meaningful relationships with residents, their families, and team members alike, you will also gain joy in serving others and deep fulfillment in your work. Explore how you can follow your passions and shed light on meaningful ways to serve, grow, and shine together. Sunrise Senior Living was again certified as a Great Place to Work® by Activated Insights. This is the 9th time Sunrise has received this top culture and workplace designation, highlighting the special place Sunrise is to be a part of. COMMUNITY NAME Sunrise of Cascade Job ID 2025-226046 JOB OVERVIEW The Medication Care Manager is responsible for providing the highest degree of quality care and services by administering medication and treatments in a safe organized manner. Responsibilities include but are not limited to administration of medications, documentation of medication administration, and providing resident care while demonstrating the Mission for Sunrise Senior Living, "to champion the quality of life for all seniors" in accordance with federal, state/provincial, and local laws, standards, and regulations and Sunrise Senior Living policies to promote the highest degree of quality care and services to our residents. RESPONSIBILITIES & QUALIFICATIONS Essential Duties As a part of the Sunrise team, supporting our Mission, Principles of Service and Core Values is a fundamental part of this job. Our foundational belief is the sacred value of human life. The unique responsibilities for this role include but are not limited to the essential functions listed as follows: Medication Administration • Provide the highest degree of quality care and services by administering medication and treatments in a safe organized manner., • Review, read, notate, and initial the electronic health record to document and learn about pertinent information about residents., • Receive medication updates from Resident Care Director (RCD) or Wellness Nurse., • Administer, assist with, and observe medications and treatments for each resident using the medication administration record and the Six Rights of Medication Pass ("Right" resident, medication, dosage, time, route, right to refuse)., • Ensure that medications are passed according to times and utilizing the mobile med cart., • Document and initial as medications are given and ensure that appropriate documentation is completed for refusal or missed doses., • Maintain confidentiality of all resident information including resident medication among other residents., • Report all resident concerns and unavailable medications, made while administering the medication, to the RCD or Wellness Nurse., • Restock medication cart after all medication passes., • Assist in checking medication regardless of packaging system., • Assess the residents to determine need for "as needed medication" and appropriately document and report to supervisor., • Count all narcotics with another Medication Care Manager (MCM) or Lead Care Manager (LCM) each shift and report discrepancies., • Maintain and clean the Medication Room, medication carts, and treatment carts for neatness, cleanliness, availability of medications, and expired medications., • Follow re-fill process for medications and notify RCD or Wellness Nurse if a new prescription is needed., • Help residents maintain independence and promote dignity and physical safety of each resident adhering to the Sunrise Principles of Service., • Strive to understand and respond to each resident with empathy, always remaining mindful of the resident's unique communication patterns, history, and basic human needs., • Practice routinely good standard care precautions of cleanliness, hygiene, and health.Resident Care Communications, • Notify RCD of any resident and/or family concerns., • Attend and actively participates in daily Cross Over meetings facilitated by the LCM., • Participate in the development of the Individualized Service Plans (ISP).Risk Management and General Safety, • Partner with community team to ensure community is in compliance with national/provincial regulations pertaining to occupational health and safety requirements, promoting Risk Management programs and policies, and adhering to safety rules and regulations., • Practice safety procedures at all times including Personal Protective Equipment (PPE), fire extinguishers, Safety Data Sheets (SDS), and Lockout Tagout procedures., • Report all accidents/incidents immediately., • Report all unsafe and hazardous conditions/equipment immediately., • Ensure any cords, carts, equipment, and other hazards are always kept out of the way, not blocking exits and in compliance with fire codes., • Comply with all infection control techniques, placement of bio-hazard containers, removal techniques, procedures, and policies., • Understand and practice the proper method of attending to and disposing of, and the possibility of exposure to, blood borne pathogens, bodily fluids, infectious waste, sharp sticks, and hazardous materials., • Report occupational exposures to blood, body fluids, infectious materials, sharp sticks and hazardous chemicals immediately., • Ensure oxygen tanks are stored safely, exchange guest/resident's tanks when empty, and monitor to make sure liters of oxygen are at prescribed levels.Training and Contributing to Team Success, • Participate as a member of a team and commit to working toward team goals., • Demonstrate in daily interactions with others, our Team Member Credo., • Commit to serving our residents and guests through our Principles of Service., • Contribute to the overall engagement programs and processes (customer and team member engagement) including participating in the team member engagement survey and engagement improvement planning workshops., • Attend regular meetings; Town Hall, Department Team., Cross Over, Medication Technician, and others as directed by the Supervisor/Department Coordinator., • Attend regular training by RCD and neighborhood coordinators., • Maintain compliance in assigned required training and all training required by state/province or other regulating authorities as applicable to this role to ensure that Sunrise standards are always met., • Perform other duties as assigned. Core Competencies • Ability to make choices and decisions and act in the resident's best interest, • Ability to react and remain calm in difficult situations, • Ability to handle multiple priorities, • Possess written and verbal skills for effective communication and level of understanding, • Demonstrate good judgment, problem solving and decision-making skills Experience and Qualifications • High School diploma/GED accepted and may be required per state/provincial regulations, • In states/provinces where appropriate, must maintain certifications, • Maintain the following certifications and ongoing training and re-education as required by Sunrise and state/provincial regulations:, • CPR and First Aid, • Must be at least 18 years of age, • Previous experience working with seniors preferred, • Desire to serve and care for seniors, • As applicable, all Sunrise team members who drive a Sunrise vehicle must sign the Driver job description and understand the key essential duties for safety and regulatory compliance ABOUT SUNRISE Ready to take the next step and make a bigger impact than you ever imagined? As part of our team, you will help brighten the future for everyone at Sunrise and beyond. That is why we make it a priority to celebrate the unique ways you bring moments of togetherness and joy to everyone you serve. And when combined with the support, benefits, and growth opportunities we offer, the result is a career that PositivelyShines with everything you need to reach your goals - at work and in your life. We also offer benefits and other compensation that include: • Medical, Dental, Vision, Life, and Disability Plans, • Retirement Savings Plans, • Employee Assistant Program / Discount Program, • Paid time off (PTO), sick time, and holiday pay, • myFlexPay offered to get paid within hours of a shift, • Tuition Reimbursement, • In addition to base compensation, Sunrise may offer discretionary and/or non-discretionary bonuses. The eligibility to receive such a bonus will depend on the employee's position, plan/program offered by Sunrise at the time, and required performance pursuant to the plan/program. PRE-EMPLOYMENT REQUIREMENTS Sunrise considers the health and safety of its residents, family members, and team members to be one of its highest priorities. Employment with Sunrise is conditioned on completing and passing a drug test (which does not include marijuana), participating in testing requirements (e.g. Tuberculosis Test, Physical Evaluation). Covid-19 and Influenza vaccination is only required to the extent mandated by applicable federal, state, and local laws and authorities. COMPENSATION DISCLAIMER Selected candidates will be offered competitive compensation based on geographic location of community/office, skills, experience, qualifications, and certifications/licenses (where applicable).

When you join Sunrise Senior Living, you will be able to use your unique skills to empower residents to live longer, healthier, and happier lives. Not only will you build meaningful relationships with residents, their families, and team members alike, you will also gain joy in serving others and deep fulfillment in your work. Explore how you can follow your passions and shed light on meaningful ways to serve, grow, and shine together. Sunrise Senior Living was again certified as a Great Place to Work® by Activated Insights. This is the 9th time Sunrise has received this top culture and workplace designation, highlighting the special place Sunrise is to be a part of. COMMUNITY NAME Sunrise of Cascade Job ID 2025-230704 JOB OVERVIEW The Care Manager/"Designated Care Manager" is responsible for providing the highest degree of quality care and services to a consistent group of residents and their families in our assisted living/long term care and reminiscence neighborhoods. The Care Manager provides hands on care and physical and emotional support as outlined in each resident's Individualized Service Plan (ISP) while maintaining a safe and comfortable home like environment. The Care Manager/"Designated Care Manager" is responsible for demonstrating the Mission for Sunrise Senior Living, "to champion quality of life for all seniors" in accordance with federal, state/provincial, and local laws and regulations and Sunrise Senior Living standards, policies, and procedures to promote the highest degree of quality care and services to our residents. RESPONSIBILITIES & QUALIFICATIONS Essential Duties As a part of the Sunrise team, supporting our Mission, Principles of Service and Core Values is a fundamental part of this job. Our foundational belief is the sacred value of human life. The unique responsibilities for this role include but are not limited to the essential functions listed as follows: Resident Care • Review, read, notate, and initial Daily Log to document and learn about pertinent information about residents., • Participate in the development of the ISPs and monthly updates., • Review designated assignments., • Responsible for a designated group of residents during the shift, knows where residents are, and physically checks on them throughout the shift., • Observe, report, and document symptoms and conditions of residents for changes in condition such as skin, behavior, alertness, weight, diet, and participation in activities., • Attend daily Cross Over meetings by the lead care manager., • Notify supervisor and resident care director if a resident has increased care needs., • Inform supervisor of any resident changes in condition., • Respond to security system and resident call bells promptly and immediately. Take appropriate action including resetting call bells., • Greet guests, family members, residents, and team members., • Answer, direct and/or respond to phone calls in a timely, courteous, and professional manner., • Assist with continence management and dispose of all continence products properly to ensure sanitation of resident suite and community restrooms using standard care procedures., • Communicate with families and is a resource as needed., • Help residents maintain independence and physical safety and promote dignity of each resident adhering to the standards of Resident Rights and Sunrise Principles of Service., • Participate/lead and assist residents with activities of daily living (ADLs) and Invite, Encourage, and Assist (IEA) residents to participate in activities as indicated on the ISP., • Engage residents in life skills and other life enrichment activities throughout the day in reminiscence., • Strive to understand and respond to each resident with empathy, always remaining mindful of the resident's unique communication patterns or history and basic human needs., • Maintain an atmosphere of warmth, personal interest, and positive emphasis as well as a calm environment., • Ensure the established safety regulations are always followed., • Practice routinely good Standard Care Precautions of cleanliness, hygiene, and health., • Host and engage in activities with the residents daily.Risk Management and General Safety, • Partner with community team to ensure community is in compliance with national/provincial regulations pertaining to occupational health and safety requirements, promoting Risk Management programs and policies, and adhering to safety rules and regulations., • Practice safety procedures at all times including Personal Protective Equipment (PPE), fire extinguishers, Safety Data Sheets (SDS), and Lockout Tagout procedures., • Report all accidents/incidents immediately., • Reports all unsafe and hazardous conditions/equipment immediately., • Ensure any cords, carts, equipment, and other hazards are always kept out of the way, not blocking exits, and in compliance with fire codes., • Understand and practice the proper method of attending to and disposing of, and the possibility of exposure to, blood borne pathogens, bodily fluids, infectious waste, sharp sticks, and hazardous materials., • Report occupational exposures to blood, body fluids, infectious materials, sharp sticks, and hazardous chemicals immediately., • Ensure oxygen tanks are stored safely, exchanged when empty and monitored to make sure liters of oxygen are at prescribed levels.Housekeeping and Laundry Services, • Maintain and clean resident's room as assigned including making beds, emptying trash, putting clothes away appropriately, spot sweeping, and mopping as needed., • Wash resident's laundry as noted in the ISP and as needed., • Wash and fold dining room linens and napkins., • Complete assigned housekeeping tasks., • Maintain common areas in a clean and tidy manner at all times.Dining Service, • Serve meals in the dining room and work in the dining room as assigned., • Promote and ensure a pleasant dining experience during all meals., • Assist with dining room set up and clean up as assigned., • Participate in pre-meal meetings., • Follow residents' diets as indicated on ISP and Confidential Diet Board/Chart., • Observe, note, and document in daily log any resident changes in dining habits., • Respond to the dining needs of the residents and guests while maintaining Sunrise hospitality and service standards., • Provide room service delivery as needed., • Practice safe food handling in compliance with universal care precautions at all times.Specific Responsibilities for the Reminiscence Neighborhood Care Manager, • IEA residents in life skills and other life enriching activities as indicated on ISP and demographic profile., • IEA residents to attend the afternoon social., • Incorporate the concept of 'Creating Pleasant Days' into the resident's daily routine., • Integrate the individual resident's life skills into their daily routine., • Blend a variety of multi-sensory experiences into the resident's day., • Participate in monthly letters home and letter writing with the residents and their families.Training and Contributing to Team Success, • Participate as a member of a team and commits to working toward team goals., • Demonstrate in daily interactions with others, our Team Member Credo., • Commit to serving our residents and guests through our Principles of Service., • Contribute to the overall engagement programs and processes (customer and team member engagement) including participating in the team member engagement survey and engagement improvement planning workshops., • Attend regular meetings; Town Hall, Department Team, Cross Over, and others as directed by the Supervisor/Department Coordinator., • Attend regular training by Assisted Living Coordinator (ALC), Resident Care Coordinator (RCC) or Reminiscence Coordinator (RC) using mini modules., • Comply with all infection control techniques, placement of bio-hazard containers, and removal techniques as listed in policies and procedures., • Maintains compliance in assigned required training and all training required by state/province or other regulating authorities as applicable to this role to ensure that Sunrise standards are always met., • Perform other duties as assigned. Core Competencies • Ability to react and remain calm in difficult situations, • Ability to handle multiple priorities, • Possess written and verbal skills for effective communication and a level of understanding, • Competent in organizational and time management skills, • Demonstrates good judgment, problem solving and decision-making skills Experience and Qualifications • High School diploma/GED accepted and may be required per state/provincial regulations., • CPR Certificate and First Aid as required by state/provincial regulations, • Must be at least 18 years of age, • Previous experience working with seniors preferred, • Desire to serve and care for seniors, • Ability to make choices and decisions and act in the resident's best interest, • As applicable, all Sunrise team members who drive a Sunrise vehicle must sign the Driver job description and understand the key essential duties for safety and regulatory compliance ABOUT SUNRISE Ready to take the next step and make a bigger impact than you ever imagined? As part of our team, you will help brighten the future for everyone at Sunrise and beyond. That is why we make it a priority to celebrate the unique ways you bring moments of togetherness and joy to everyone you serve. And when combined with the support, benefits, and growth opportunities we offer, the result is a career that PositivelyShines with everything you need to reach your goals - at work and in your life. We also offer benefits and other compensation that include: • Medical, Dental, Vision, Life, and Disability Plans, • Retirement Savings Plans, • Employee Assistant Program / Discount Program, • Paid time off (PTO), sick time, and holiday pay, • myFlexPay offered to get paid within hours of a shift, • Tuition Reimbursement, • In addition to base compensation, Sunrise may offer discretionary and/or non-discretionary bonuses. The eligibility to receive such a bonus will depend on the employee's position, plan/program offered by Sunrise at the time, and required performance pursuant to the plan/program. PRE-EMPLOYMENT REQUIREMENTS Sunrise considers the health and safety of its residents, family members, and team members to be one of its highest priorities. Employment with Sunrise is conditioned on completing and passing a drug test (which does not include marijuana), participating in testing requirements (e.g. Tuberculosis Test, Physical Evaluation). Covid-19 and Influenza vaccination is only required to the extent mandated by applicable federal, state, and local laws and authorities. COMPENSATION DISCLAIMER Selected candidates will be offered competitive compensation based on geographic location of community/office, skills, experience, qualifications, and certifications/licenses (where applicable).

Job DescriptionBenefits: • PTO, • Insurance, • Food and Beverage Discounts at all locations All are conveniently located in the Uptown neighborhood on Wealthy Street. Food brings us together. Hospitality keeps us around. Authenticity and eclectic food and beverage innovation sets us apart. Our unique taste is paired with unparalleled customer service and a welcoming atmosphere. Line cooks will have oversite of kitchen service operations during their shift. Areas of Focus (including but not limited to): • Preparing a variety of meats, seafood, poultry, vegetables and other food items, • Assuming 100% responsibility for the quality of products made, • Efficient in portion sizes, cooking methods, quality standards, and kitchen standards, • Stocking and product management including waste control, • Maintaining a clean and sanitary workstation, • Excelling in time management, • Following all food safety standards and proceduresRequirements:, • Minimum 1-year experience as a prep cook in a high-volume restaurant/bar, • Strong organizational skills to manage the needs of the restaurant, • Detailed oriented, • Having a positive, welcoming, and upbeat attitude, • Communication skills to inspire and motivate consistency and excellence This job profile does not contain a comprehensive listing of all required activities, duties, or responsibilities. Job duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. If youre passionate about food, driven to provide exceptional service, and excited to be part of a dynamic team, wed love to hear from you!

Job DescriptionBenefits: • PTO, • Insurance, • Food and Beverage Discounts at all locations All are conveniently located in the Uptown neighborhood on Wealthy Street. Food brings us together. Hospitality keeps us around. Authenticity and eclectic food and beverage innovation sets us apart. Our unique taste is paired with unparalleled customer service and a welcoming atmosphere. Prep cooks will have oversite of kitchen service operations during their shift. Areas of Focus (including but not limited to): • Preparing a variety of meats, seafood, poultry, vegetables and other food items, • Assuming 100% responsibility for the quality of products made, • Efficient in portion sizes, cooking methods, quality standards, and kitchen standards, • Stocking and product management including waste control, • Maintaining a clean and sanitary workstation, • Excelling in time management, • Following all food safety standards and proceduresRequirements:, • Minimum 1-year experience as a prep cook in a high-volume restaurant/bar, • Strong organizational skills to manage the needs of the restaurant, • Detailed oriented, • Having a positive, welcoming, and upbeat attitude, • Communication skills to inspire and motivate consistency and excellence This job profile does not contain a comprehensive listing of all required activities, duties, or responsibilities. Job duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. If youre passionate about food, driven to provide exceptional service, and excited to be part of a dynamic team, wed love to hear from you!

Job DescriptionBenefits: • PTO, • Insurance, • Food and Beverage Discounts at all locations All are conveniently located in the Uptown neighborhood on Wealthy Street. Food brings us together. Hospitality keeps us around. Authenticity and eclectic food and beverage innovation sets us apart. Our unique taste is paired with unparalleled customer service and a welcoming atmosphere. Line cooks will have oversite of kitchen service operations during their shift. Areas of Focus (including but not limited to): • Preparing a variety of meats, seafood, poultry, vegetables and other food items, • Assuming 100% responsibility for the quality of products made, • Efficient in portion sizes, cooking methods, quality standards, and kitchen standards, • Stocking and product management including waste control, • Maintaining a clean and sanitary workstation, • Excelling in time management, • Following all food safety standards and proceduresRequirements:, • Minimum 1-year experience as a prep cook in a high-volume restaurant/bar, • Strong organizational skills to manage the needs of the restaurant, • Detailed oriented, • Having a positive, welcoming, and upbeat attitude, • Communication skills to inspire and motivate consistency and excellence This job profile does not contain a comprehensive listing of all required activities, duties, or responsibilities. Job duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. If youre passionate about food, driven to provide exceptional service, and excited to be part of a dynamic team, wed love to hear from you!

Job DescriptionBenefits: • PTO, • Insurance, • Food and Beverage Discounts at all locations All are conveniently located in the Uptown neighborhood on Wealthy Street. Food brings us together. Hospitality keeps us around. Authenticity and eclectic food and beverage innovation sets us apart. Our unique taste is paired with unparalleled customer service and a welcoming atmosphere. Line cooks will have oversite of kitchen service operations during their shift. Areas of Focus (including but not limited to): • Preparing a variety of meats, seafood, poultry, vegetables and other food items, • Assuming 100% responsibility for the quality of products made, • Efficient in portion sizes, cooking methods, quality standards, and kitchen standards, • Stocking and product management including waste control, • Maintaining a clean and sanitary workstation, • Excelling in time management, • Following all food safety standards and proceduresRequirements:, • Minimum 1-year experience as a prep cook in a high-volume restaurant/bar, • Strong organizational skills to manage the needs of the restaurant, • Detailed oriented, • Having a positive, welcoming, and upbeat attitude, • Communication skills to inspire and motivate consistency and excellence This job profile does not contain a comprehensive listing of all required activities, duties, or responsibilities. Job duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. If youre passionate about food, driven to provide exceptional service, and excited to be part of a dynamic team, wed love to hear from you!

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$37.70/hr $3/hr Weekly Attendance Bonus $2 shift premium from 2:00pm-6:00am Sign-on Bonus: $5,000 • Paid Lunch and Break times, • Medical, Dental, Vision, and Prescription Drug Insurance, • Weekly Perfect Attendance Bonuses, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Employee Discounts, • Accountable for the production of food safe product in a fast paced manufacturing environment; including but not limited to work with electrical systems, refrigeration systems, plumbing, manufacturing equipment, boiler operation, water quality, waste water, and complete work orders, projects, preventative maintenance, water quality inspection procedures testing by making adjustments in a timely manner, • Complete all paperwork pertaining to work orders, service call reports and purchase requisitions, initiate purchase requisitions for parts and document shift events, problems and repairs or actions taken, • Maintain adherence to all Corporate Environmental Health and Safety Policies and Procedures, • 3 years of industrial Maintenance experience or completion of Maintenance Trainee Program at Cargill or completion of technical college degree in related field, • Willingness and ability to complete the following trainings and obtain license or certification: boiler license, forklift license, ammonia specific refrigeration training and certification, • Availability to work outside of normal shift up to including weekend and off shift hours as needed, • Must be eligible to work in the United States without visa sponsorship, • Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025, • Be willing to be a part of the Hazmat team, • Must be 18 years or older, • Strong electrical & mechanical aptitude, • Ability to read & interpret blueprints or other forms of engineering drawings, • Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics, • Ability to read, write, and speak English Preferred Qualifications • Previous maintenance experience, • Food manufacturing experience, • Previous leadership experience Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$37.70/hr $3/hr Weekly Attendance Bonus $2 shift premium from 2:00pm-6:00am Sign-on Bonus: $5,000 • Paid Lunch and Break times, • Medical, Dental, Vision, and Prescription Drug Insurance, • Weekly Perfect Attendance Bonuses, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Employee Discounts, • Accountable for the production of food safe product in a fast paced manufacturing environment; including but not limited to work with electrical systems, refrigeration systems, plumbing, manufacturing equipment, boiler operation, water quality, waste water, and complete work orders, projects, preventative maintenance, water quality inspection procedures testing by making adjustments in a timely manner, • Complete all paperwork pertaining to work orders, service call reports and purchase requisitions, initiate purchase requisitions for parts and document shift events, problems and repairs or actions taken, • Maintain adherence to all Corporate Environmental Health and Safety Policies and Procedures, • 3 years of industrial Maintenance experience or completion of Maintenance Trainee Program at Cargill or completion of technical college degree in related field, • Willingness and ability to complete the following trainings and obtain license or certification: boiler license, forklift license, ammonia specific refrigeration training and certification, • Availability to work outside of normal shift up to including weekend and off shift hours as needed, • Must be eligible to work in the United States without visa sponsorship, • Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025, • Be willing to be a part of the Hazmat team, • Must be 18 years or older, • Strong electrical & mechanical aptitude, • Ability to read & interpret blueprints or other forms of engineering drawings, • Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics, • Ability to read, write, and speak English Preferred Qualifications • Previous maintenance experience, • Food manufacturing experience, • Previous leadership experience Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$37.70/hr $3/hr Weekly Attendance Bonus $2 shift premium from 2:00pm-6:00am Sign-on Bonus: $5,000 • Paid Lunch and Break times, • Medical, Dental, Vision, and Prescription Drug Insurance, • Weekly Perfect Attendance Bonuses, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Employee Discounts, • Accountable for the production of food safe product in a fast paced manufacturing environment; including but not limited to work with electrical systems, refrigeration systems, plumbing, manufacturing equipment, boiler operation, water quality, waste water, and complete work orders, projects, preventative maintenance, water quality inspection procedures testing by making adjustments in a timely manner, • Complete all paperwork pertaining to work orders, service call reports and purchase requisitions, initiate purchase requisitions for parts and document shift events, problems and repairs or actions taken, • Maintain adherence to all Corporate Environmental Health and Safety Policies and Procedures, • 3 years of industrial Maintenance experience or completion of Maintenance Trainee Program at Cargill or completion of technical college degree in related field, • Willingness and ability to complete the following trainings and obtain license or certification: boiler license, forklift license, ammonia specific refrigeration training and certification, • Availability to work outside of normal shift up to including weekend and off shift hours as needed, • Must be eligible to work in the United States without visa sponsorship, • Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025, • Be willing to be a part of the Hazmat team, • Must be 18 years or older, • Strong electrical & mechanical aptitude, • Ability to read & interpret blueprints or other forms of engineering drawings, • Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics, • Ability to read, write, and speak English Preferred Qualifications • Previous maintenance experience, • Food manufacturing experience, • Previous leadership experience Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$37.70/hr $3/hr Weekly Attendance Bonus $2 shift premium from 2:00pm-6:00am Sign-on Bonus: $5,000 • Paid Lunch and Break times, • Medical, Dental, Vision, and Prescription Drug Insurance, • Weekly Perfect Attendance Bonuses, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Employee Discounts, • Accountable for the production of food safe product in a fast paced manufacturing environment; including but not limited to work with electrical systems, refrigeration systems, plumbing, manufacturing equipment, boiler operation, water quality, waste water, and complete work orders, projects, preventative maintenance, water quality inspection procedures testing by making adjustments in a timely manner, • Complete all paperwork pertaining to work orders, service call reports and purchase requisitions, initiate purchase requisitions for parts and document shift events, problems and repairs or actions taken, • Maintain adherence to all Corporate Environmental Health and Safety Policies and Procedures, • 3 years of industrial Maintenance experience or completion of Maintenance Trainee Program at Cargill or completion of technical college degree in related field, • Willingness and ability to complete the following trainings and obtain license or certification: boiler license, forklift license, ammonia specific refrigeration training and certification, • Availability to work outside of normal shift up to including weekend and off shift hours as needed, • Must be eligible to work in the United States without visa sponsorship, • Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025, • Be willing to be a part of the Hazmat team, • Must be 18 years or older, • Strong electrical & mechanical aptitude, • Ability to read & interpret blueprints or other forms of engineering drawings, • Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics, • Ability to read, write, and speak English Preferred Qualifications • Previous maintenance experience, • Food manufacturing experience, • Previous leadership experience Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$37.70/hr $3/hr Weekly Attendance Bonus $2 shift premium from 2:00pm-6:00am Sign-on Bonus: $5,000 • Paid Lunch and Break times, • Medical, Dental, Vision, and Prescription Drug Insurance, • Weekly Perfect Attendance Bonuses, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Employee Discounts, • Accountable for the production of food safe product in a fast paced manufacturing environment; including but not limited to work with electrical systems, refrigeration systems, plumbing, manufacturing equipment, boiler operation, water quality, waste water, and complete work orders, projects, preventative maintenance, water quality inspection procedures testing by making adjustments in a timely manner, • Complete all paperwork pertaining to work orders, service call reports and purchase requisitions, initiate purchase requisitions for parts and document shift events, problems and repairs or actions taken, • Maintain adherence to all Corporate Environmental Health and Safety Policies and Procedures, • 3 years of industrial Maintenance experience or completion of Maintenance Trainee Program at Cargill or completion of technical college degree in related field, • Willingness and ability to complete the following trainings and obtain license or certification: boiler license, forklift license, ammonia specific refrigeration training and certification, • Availability to work outside of normal shift up to including weekend and off shift hours as needed, • Must be eligible to work in the United States without visa sponsorship, • Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025, • Be willing to be a part of the Hazmat team, • Must be 18 years or older, • Strong electrical & mechanical aptitude, • Ability to read & interpret blueprints or other forms of engineering drawings, • Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics, • Ability to read, write, and speak English Preferred Qualifications • Previous maintenance experience, • Food manufacturing experience, • Previous leadership experience Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$37.70/hr $3/hr Weekly Attendance Bonus $2 shift premium from 2:00pm-6:00am Sign-on Bonus: $5,000 • Paid Lunch and Break times, • Medical, Dental, Vision, and Prescription Drug Insurance, • Weekly Perfect Attendance Bonuses, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Employee Discounts, • Accountable for the production of food safe product in a fast paced manufacturing environment; including but not limited to work with electrical systems, refrigeration systems, plumbing, manufacturing equipment, boiler operation, water quality, waste water, and complete work orders, projects, preventative maintenance, water quality inspection procedures testing by making adjustments in a timely manner, • Complete all paperwork pertaining to work orders, service call reports and purchase requisitions, initiate purchase requisitions for parts and document shift events, problems and repairs or actions taken, • Maintain adherence to all Corporate Environmental Health and Safety Policies and Procedures, • 3 years of industrial Maintenance experience or completion of Maintenance Trainee Program at Cargill or completion of technical college degree in related field, • Willingness and ability to complete the following trainings and obtain license or certification: boiler license, forklift license, ammonia specific refrigeration training and certification, • Availability to work outside of normal shift up to including weekend and off shift hours as needed, • Must be eligible to work in the United States without visa sponsorship, • Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025, • Be willing to be a part of the Hazmat team, • Must be 18 years or older, • Strong electrical & mechanical aptitude, • Ability to read & interpret blueprints or other forms of engineering drawings, • Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics, • Ability to read, write, and speak English Preferred Qualifications • Previous maintenance experience, • Food manufacturing experience, • Previous leadership experience Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$37.70/hr $3/hr Weekly Attendance Bonus $2 shift premium from 2:00pm-6:00am Sign-on Bonus: $5,000 • Paid Lunch and Break times, • Medical, Dental, Vision, and Prescription Drug Insurance, • Weekly Perfect Attendance Bonuses, • Health and Wellness Incentives, • Paid Vacation and Holidays, • 401(k) with Cargill matching contributions, • Flexible Spending Accounts (FSAs), • Short-Term Disability and Life Insurance, • Employee Assistance Program (EAP), • Tuition Reimbursement, • Employee Discounts, • Accountable for the production of food safe product in a fast paced manufacturing environment; including but not limited to work with electrical systems, refrigeration systems, plumbing, manufacturing equipment, boiler operation, water quality, waste water, and complete work orders, projects, preventative maintenance, water quality inspection procedures testing by making adjustments in a timely manner, • Complete all paperwork pertaining to work orders, service call reports and purchase requisitions, initiate purchase requisitions for parts and document shift events, problems and repairs or actions taken, • Maintain adherence to all Corporate Environmental Health and Safety Policies and Procedures, • 3 years of industrial Maintenance experience or completion of Maintenance Trainee Program at Cargill or completion of technical college degree in related field, • Willingness and ability to complete the following trainings and obtain license or certification: boiler license, forklift license, ammonia specific refrigeration training and certification, • Availability to work outside of normal shift up to including weekend and off shift hours as needed, • Must be eligible to work in the United States without visa sponsorship, • Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025, • Be willing to be a part of the Hazmat team, • Must be 18 years or older, • Strong electrical & mechanical aptitude, • Ability to read & interpret blueprints or other forms of engineering drawings, • Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics, • Ability to read, write, and speak English Preferred Qualifications • Previous maintenance experience, • Food manufacturing experience, • Previous leadership experience Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use ___ to create a login to apply.

Job DescriptionBenefits: • Employee discounts, • Flexible schedule, • Opportunity for advancement We are currently seeking an enthusiastic and motivated Shop Assistant to join our growing team. The individual will be a shop assistant with the following responsibilities: Maintain the organization and cleanup of the shop and grounds. Daily property walk including pick up trash, put rocks back in the rock beds, run the magnet and keep the parking lot tidy. Put away tools and small equipment. Assist technicians in loading and unloading for job sites. Check in product for quality control (Receiving). Packaging product for shipping (Shipping). Disposal of crates and various other packing waste and trash removal from shop and production areas. Assist with production as needed. Must have valid drivers license. Clean company vehicles. Professionally represent our company at all times with any outside firms or independent contractors. Additional duties as assigned by management. Welding experience is a plus

Job DescriptionBenefits: • PTO, • 401k, • Food and Beverage Discounts at all locations, • 401(k), • 401(k) matching, • Dental insurance, • Employee discounts All are conveniently located in the Uptown neighborhood on Wealthy Street. Food brings us together. Hospitality keeps us around. Authenticity and eclectic food and beverage innovation sets us apart. Our unique taste is paired with unparalleled customer service and a welcoming atmosphere. Dishwasher will have oversite of kitchen dish operations during their shift. Areas of Focus (including but not limited to): • Operating standard kitchen equipment safely and efficiently, • Practicing good cleanliness and sanitary standards, • Assisting with cleaning and organizing of restaurant, • Stocking and product management including waste control, • Excelling in time management, • Following all food safety standards and proceduresRequirements:, • Strong organizational skills to manage the needs of the restaurant, • Detailed oriented, • Having a positive, welcoming and upbeat attitude, • Communication skills to inspire and motivate consistency and excellence This job profile does not contain a comprehensive listing of all required activities, duties, or responsibilities. Job duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. If youre passionate about food, driven to provide exceptional service, and excited to be part of a dynamic team, wed love to hear from you!

Job Description Wellness Director Position Summary: The Wellness Director plays an integral role in upholding American House’s mission to enrich the lives of those we serve. Our Wellness Directors supervise all Wellness team members. This is a leadership position within the community and serves as manager on duty in the absence of the Executive Director. Wellness Director Duties/Responsibilities: • Overall supervision of all Wellness team members, including but not limited to training, performance management, coaching, motivating, and evaluating., • Overall implementation, delivery, and coordination of resident services at the community. Directly supervises all employees of the Wellness department., • Carries out supervisory responsibilities in accordance with American House's policies and procedures. The responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems., • Coordinate, along with the Executive Director, family/resident care conferences and serve as a direct liaison between residents, families, and staff., • Assess/evaluate potential residents for Assisted Living/Memory Care level of care utilizing assessment tool. This may involve assessing/evaluating potential residents in their home or another healthcare setting; must be able to drive to location and perform assessment/evaluation professionally and timely if necessary., • Ensure compliance with all state regulatory requirements including mandatory reporting to State Regulatory Body., • Ensure that all incident reports are completed, filed, and that follow-up is conducted appropriately., • Ensure that all staff follows established safety regulations, including fire protection, infection control, blood borne pathogens, hazardous waste, and quality assurance programs., • Ensure compliance of the Medication Aide program via supervision, delegation, training, and ongoing competency checks, where applicable., • Provides oversight with medication management to assure eMAR's are correct and that the residents receive medications timely and accurately., • Provides marketing support within the community by participating in tours and discussions with potential residents and their families about clinical needs of the prospect., • Work in conjunction with Residents' attending Physician to make certain highest quality of service is being provided, • Maintain high level confidentiality of all information related to the role, • Investigate all complaints, grievances, and incidents, and work with the Executive Director concerning appropriate responses and corrective actions., • Creates positive employee relations through staff appreciation programs, recognition of excellent performance, and retention through regular feedback systems and promotional incentive programs., • Monitor licensure and certification compliance for all Wellness staff., • Provide written and oral reports to the Executive Director and Regional Wellness Director concerning the operation of the Wellness Department., • Lead coordination of health care services with other third-party providers to ensure continuity of care., • Submit recommendations to the Executive Director for budget, equipment, and supplies., • 3 years of management experience in healthcare or service-related setting, • Licensed Practical Nurse or Registered Nursing, • Bachelor of Science in Nursing (BSN) Degree preferred, • Must pass a pre-employment background check, drug screen, TB test and physicalCompany DescriptionFounded in 1979, American House Senior Living Communities’ vision is to provide high-quality housing for senior at a price affordable for retirees and their families. That vision of excellence has endured for nearly 40 years and expanded to serve residents at a number of senior housing communities. Our mission is to enrich the lives of those we serve, providing an environment that fosters meaningful relationships. Our vision is to be an innovative senior housing company that created sustainable excellence and stakeholder value, with an unparalleled commitment to passionate care provided by compassionate peopleFounded in 1979, American House Senior Living Communities’ vision is to provide high-quality housing for senior at a price affordable for retirees and their families. That vision of excellence has endured for nearly 40 years and expanded to serve residents at a number of senior housing communities. Our mission is to enrich the lives of those we serve, providing an environment that fosters meaningful relationships. Our vision is to be an innovative senior housing company that created sustainable excellence and stakeholder value, with an unparalleled commitment to passionate care provided by compassionate people

Job DescriptionDescription: Position Title: Stocker Department: Warehouse Reports To: Store Manager or Assistant Store Manager Location: Supermercado Mexico, Chicago Drive Employment Type: Full-Time - Hourly Job Summary The Stocker ensures the proper arrangement, rotation, and maintenance of merchandise on shelves and in storage areas. This role also supports inventory processes, waste management, and ensures a clean and organized store environment while providing excellent customer service. Key Responsibilities Customer Service: • Receive and organize goods upon delivery., • Arrange and stock fruits, vegetables, beverages, and dairy products in their respective areas, including refrigerators., • Front and arrange merchandise on shelves for a tidy appearance., • Monitor products for approaching expiration dates and ensure proper rotation., • Verify that all products have correct labels., • Manage waste disposal and maintain proper registration of waste., • Use the Flash Food application (Division-specific) to review and update product listings and generate sales reports., • Prepare WIC product stock reports to ensure availability., • Assist in the preparation of partial inventories., • Conduct product scanning as required., • Place advertising materials for specials and promotions. Education: • Basic computing skills., • Strong organizational abilities., • Effective teamwork and collaboration., • Problem-solving skills., • Customer service and support. This job profile outlines key duties and qualifications for the role but is not exhaustive. Responsibilities may change as the needs of the business evolve.

Job DescriptionDescription: Position Title: Stocker Department: Warehouse Reports To: Store Manager or Assistant Store Manager Location: Supermercado Mexico, Division Ave Employment Type: Full-Time - Hourly Job Summary The Stocker ensures the proper arrangement, rotation, and maintenance of merchandise on shelves and in storage areas. This role also supports inventory processes, waste management, and ensures a clean and organized store environment while providing excellent customer service. Key Responsibilities Customer Service: • Receive and organize goods upon delivery., • Arrange and stock fruits, vegetables, beverages, and dairy products in their respective areas, including refrigerators., • Front and arrange merchandise on shelves for a tidy appearance., • Monitor products for approaching expiration dates and ensure proper rotation., • Verify that all products have correct labels., • Manage waste disposal and maintain proper registration of waste., • Use the Flash Food application (Division-specific) to review and update product listings and generate sales reports., • Prepare WIC product stock reports to ensure availability., • Assist in the preparation of partial inventories., • Conduct product scanning as required., • Place advertising materials for specials and promotions. Education: • Basic computing skills., • Strong organizational abilities., • Effective teamwork and collaboration., • Problem-solving skills., • Customer service and support. This job profile outlines key duties and qualifications for the role but is not exhaustive. Responsibilities may change as the needs of the business evolve.

Job Description We are looking for a reliable and detail-oriented Cleaner to join our team. The successful candidate will be responsible for maintaining cleanliness and hygiene in assigned areas, including offices, restrooms, and common spaces.Key Responsibilities: • Sweep, mop, and vacuum floors, • Dust and wipe down surfaces, • Clean restrooms and replenish supplies, • Empty trash bins and dispose of waste properly, • Ensure cleaning supplies are stocked and equipment is maintained, • Follow all health and safety regulationsRequirements:, • Previous cleaning experience preferred but not required, • Ability to work independently and follow instructions, • Good time management skills, • Physical stamina to perform cleaning tasks

Job DescriptionOverview Company Overview: Join Allied Universal® Facility Management and Janitorial Services! We're committed to delivering exceptional cleaning, landscaping, and restoration services for commercial facilities. Be part of a welcoming and collaborative team where innovation meets excellence. We offer steady, reliable work in janitorial management, full-time and part-time janitorial roles, maintenance, landscaping, and metal restoration. If you want to make a meaningful impact and build a lasting career, we have opportunities for you. Join us and grow with a leader in the industry! We offer a comprehensive benefits package that may include medical, dental, and vision coverage, life insurance, a retirement plan, employee assistance programs, company discounts, and other perks, depending on the position and eligibility. Job Description: Job Description The Janitor position is responsible for performing all-purpose cleaning and preservation of assigned area inside a particular building or multiple client sites. Exact tasks of janitorial crew are not definite, consequently, must be flexible in performing assigned duties per client's specifications. Hiring Now! Weekly Pay Paid on the job training Rivertown Crossing is hiring for Full Time Janitor Wage is $16.50 / hour ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: Those duties necessary to meet the minimum requirements of the position. Other duties may be assigned: • Empty and clean all waste container. Remove waste paper and garbage from the premises to selected area; damp wipe containers., • Empty and clean all ash trays, monitor all sand urns supply and restore sand as required., • Dust all image frames, charts, graphs and wall hangings, • Damp dust all ceiling and air condition diffusers, partition grilles, register and other ventilating louvers, • Vacuum all mats and carpeted areas in workplace, lobbies, and corridors., • Hand dust and clean all office furnishings, files, fixtures, paneling, window sills and all other flat surfaces, • Wipe clean and buff all mental hardware fixtures and added bright work, • Appropriately clean and police tile floor services as required., • Damp wipe and buff all glass furnishings, • Clean entry door glass indoors and outer surface, • Remove all stains from vertical surfaces such as doors, door frames, and around light switches, private entry glass and dividers, • Wash, clean and sterilize all water coolers, • Sweep private stairways, and vacuum if carpeted, • Clean building floors, by sweeping and mopping, • Must be able to follow written and oral directions If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1440939

Job DescriptionOverview Company Overview: Join Allied Universal® Facility Management and Janitorial Services! We're committed to delivering exceptional cleaning, landscaping, and restoration services for commercial facilities. Be part of a welcoming and collaborative team where innovation meets excellence. We offer steady, reliable work in janitorial management, full-time and part-time janitorial roles, maintenance, landscaping, and metal restoration. If you want to make a meaningful impact and build a lasting career, we have opportunities for you. Join us and grow with a leader in the industry! We offer a comprehensive benefits package that may include medical, dental, and vision coverage, life insurance, a retirement plan, employee assistance programs, company discounts, and other perks, depending on the position and eligibility. Job Description: Job Description The Janitor position is responsible for performing all-purpose cleaning and preservation of assigned area inside a particular building or multiple client sites. Exact tasks of janitorial crew are not definite, consequently, must be flexible in performing assigned duties per client's specifications. Hiring Now! Weekly Pay Paid on the job training Rivertown Crossing is hiring for Full Time Exterior Janitor Wage is $17.50 / hour ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: Those duties necessary to meet the minimum requirements of the position. Other duties may be assigned: • Empty and clean all waste container. Remove waste paper and garbage from the premises to selected area; damp wipe containers., • Empty and clean all ash trays, monitor all sand urns supply and restore sand as required., • Dust all image frames, charts, graphs and wall hangings, • Damp dust all ceiling and air condition diffusers, partition grilles, register and other ventilating louvers, • Vacuum all mats and carpeted areas in workplace, lobbies, and corridors., • Hand dust and clean all office furnishings, files, fixtures, paneling, window sills and all other flat surfaces, • Wipe clean and buff all mental hardware fixtures and added bright work, • Appropriately clean and police tile floor services as required., • Damp wipe and buff all glass furnishings, • Clean entry door glass indoors and outer surface, • Remove all stains from vertical surfaces such as doors, door frames, and around light switches, private entry glass and dividers, • Wash, clean and sterilize all water coolers, • Sweep private stairways, and vacuum if carpeted, • Clean building floors, by sweeping and mopping, • Must be able to follow written and oral directions If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1440933

Job DescriptionSalary: Job Summary: The Mohs tissue processing technician will perform various tasks regarding receiving, processing and preparing frozen specimens for microscopic examination and analysis. Must be able to work independently and efficiently. Must also be able to work collaboratively when needed with members of the clinical and pathology teams. Requirements: Must have experience as a MOHS tissue processing technician. Or a minimum of 3 years of relevant experience working in a histology lab. Job duties and functions: • Works under the direction of the Physician while following established procedures for collecting biological specimens for analysis., • Performs frozen sections of surgical tissue for microscopic examination by the MOHS surgeon., • Verifies specimen validity, identification and requisition., • Maintains all documentation for CLIA, • Able to prioritize workload to ensure that patient care remains in the forefront at all times., • Able to assist the surgical team as needed throughout the day by providing patient care to our MOHS patients as needed., • Demonstrates fiscal responsibility and recognizes the need for cost containment by following practices that minimize waste., • Maintains excellent work relationships with staff, providers and management. Is accountable for his/her actions or mistakes and takes a proactive approach to problem solving., • Adheres to department policy, and to CLIA, HIPAA and OSHA regulations at all times specifically with waste disposal and specimen integrity practices. Knowledge/Skills/Abilities: • Compliance with all CLIA regulations regarding quality control and lab standards., • RMA, CNA, RN, LPN or a Bachelor's degree in a medical related field., • Knowledge of internal laboratory policies and procedures., • Excellent command of medical terminology., • Excellent command of English grammar, spelling, and punctuation., • Willing to learn new computer programs and applications., • Willing to cross train in other areas as needed., • Ability to communicate clearly and concisely., • Ability to establish and maintain positive relationships with employees, physicians, and managers across all West Michigan Dermatology sites. Working Conditions/Environmental Considerations: This is a laboratory setting therefore, there is risk of exposure to communicable diseases, toxic substances, blood borne pathogens, and sharps instruments. We offer: • Competitive compensation, • Health dental, vision benefits for full-time employees, • Retirement package, • PTO accrual and holiday benefits for full and part-time employees, • Employee discounts on products and services for full and part-time employees, • An environment that encourages employees to be high performance and to grow within the organization. Special note: Due to the unique operational needs of our clinics, we may request that our employees work in a different site from the one they were originally scheduled in. Sometimes these requests are planned and sometimes they are spontaneous and could be after the employee has reported to work for the day. Reasons for these requests vary but they are mainly is to ensure coverage in case of high patient volume, unscheduled absences from other staff, etc. Therefore, we require all our employees to have a valid and unrestricted drivers license. Mileage reimbursement will be paid in accordance with our Mileage Reimbursement Policy. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description 3rd Shift: 4-10s Monday Night- Friday Morning Are you looking for a challenging yet rewarding job that allows you to utilize your skills to their fullest potential? Do you want to join a team of hardworking, enthusiastic and creative people and enjoy working with a company that recognizes and embraces diversity? Do you take pride working with a company that is committed to being a great corporate citizen and playing a role in producing the highest quality products and services? If you answered yes to any of these questions, then Pridgeon and Clay is the place for you... Founded in 1948 by John Pridgeon and Donald Clay, we are one of the largest independent, value-added manufacturers and suppliers of automotive stamped and fine-blanked components in the United States. Mission: The Die Technician 2 works with die build or production teams to follow company designated processes to build, tryout, upkeep and maintain dies in an exemplary manner according to the company quality policies. Qualified candidates will possess the following Minimum Requirements: • High school diploma or GED, • Completion of an Associate's Degree in Tooling & Manufacturing (or similar program) or completion of a college-based or apprenticeship-based Tool & Die or Technician program or certificate, • Ability to train, teach, and assess other Die Technician trainees in the Career Path program, working well and leading and mentoring in a team environment, • Experience in the prototype or tool & die trade, specifically making, repairing, setting up, trouble-shooting and running dies, • Proven ability to work with progressive, transfer, compound, hand-feed or feinblank dies., • Skilled in machine shop and machining operations, including welding, • Proven ability to assist with managing projects and resources effectively, including detailed documentation on tooling issues and component prints, • Excellent problem-solving and trouble-shooting skills, • Ability to pass written and practical tests to obtain company hi-lo and crane license, • Proven mechanical inclination, general math and manufacturing knowledge, and trouble-shooting skills through standardized assessments, • Computer literacy, • Ability to lift 50 pounds, • Must not wear tinted safety glasses, or have a need for tinted safety glasses Standard Work: • Complete necessary paperwork for die books, tool biographies, (and EAM, if applicable), and complete and ensure stock replenishments., • Optimize and communicate knowledge base (including documenting die build and tool tryout issues, and ensuring CAD data and die books are updated) to enhance future die designs., • Maintain inventory and organization of all die detail components and sensors within defined inventory locations; receive, relocate, and issue components from defined inventory locations., • Document hours and work activity daily in record-keeping system-Electronic Asset Management (EAM)-using proper repair codes., • Prioritize and organize die repairs, work orders, components, tracking, parts, and tooling information in data systems (Kanban, EAM, Jasper). Complete and submit Maintenance/Repair/Operations (MROs) to set up stock replenishments in EAM., • Use stock lists generated by the die design team to ensure all die components are present, and if they are not, notify Manager or a lead Die Technician., • Visually compare die components with CAD data to ensure accuracy, including heat treating process (if necessary). Notify Manager or lead Die Technician of any heat treating and altering of any inaccurate die components., • Drill, set, and attach the necessary parallels., • Assemble, set, and dowel necessary die component details, drilling and mounting the blocks in the proper locations, ensuring trim steels, punches, and embosses are properly placed and meet tolerances., • Assemble all remaining die component details from stock lists and notify Manager or lead Die Technician to verify that the timing is correct., • Load dies with die springs and nitrogen cylinders., • Perform die tryouts, including setting dies, clamping die bolsters, loading coils, and feeding coil stock. Ensure dies are built accurately (t-slots, cone locators), and shut heights and feed heights are correct. Create smart pac cams for feed rate, sprayer timing, sensor timing, shut height, and overloads. Alter servo transfer systems to set fingers or fine blanking presses, as needed. Notify a lead Die Technician of any component changes, including such items as ejector pins, screws, dowels, and stripper pads., • Operate a variety of machine tools to spot, grind, and finish hardened mill blocks to verify specific dimensions, as well as build, assemble, install and adjust fingers in presses per design or instruction., • Perform the duties needed to prepare to install sensors into dies and fingers, such as verify replacement is needed, retrieving and reviewing designs and diagrams to determine optimal placement and accessibility, and organizing and labeling wires, ensuring proper channels lead to sensors., • Identify, select, install and replace sensors, guarding and valves based on function, application, and information from diagrams. Ensure that sensors, wires, boxes on rails, valves, cylinders, and hoses are protected. Document items needed for installation, including sensor and pin location and work performed, via pictures, EAM and sensor installation sheets., • Wire, verify, and adjust sensors, valves, and cams (using tools such as SmartPac and sensor cart) for proper clearances and timing to ensure optimal performance (including die clearance and timing)., • Install, plumb, and secure sprayers and sprayer components in dies properly, as well as chutes, keeping clear of all moving parts (fingers, pads, incoming material, etc.)., • Work with press technicians and process engineers to verify that newly built dies are built accurately (t-slots, cone locators, trim steels, punches, and embosses are properly placed and meet tolerances), that shut heights and feed heights are correct, and that the dies are timed out properly. Notify designer of any component changes, including such items as ejector pins, screws, dowels, and stripper pads., • Perform the tasks needed to repair dies, including clean components, change out cracked or damaged tooling, sharpen and shim, weld, grind, cut hardened components, inspect and sharpen trims, punch, and die steels, polish forms, prep backup and changeover tooling before it goes to the crib, and check parts on the fixture, and spot the detail back into a part or model of what the block shape should be., • As necessary, program transfer systems to optimally transfer parts from station to station., • Build, assemble, install and adjust fingers on die horses and in presses., • Troubleshoot automatic and hand-feed tooling and set-ups in-press., • Use data (EAM, operator observation, visual inspection, measurement, etc.) to problem solve needed die changes., • Use Smartpac and press controls modifications to ensure presses operate optimally., • Validate process parameters and notify the proper operations group to enter system deviations when applicable., • Alter or adjust die components to ensure die operations the produces optimal parts., • Apply continuous improvement concepts to dies and the changeover process via preventive maintenance and corrective actions, making adjustments to better the quality of the part and life of the tool, cost savings, fixing overlooked areas (such as stone the die sets, clean the dies, remake worn steels and die components), simplify the dies, and identify potential cost savings for pitch and width reductions, and ensure back up tooling is correct and present., • Identify and attempt to eliminate areas of waste for better efficiency and overall production needs., • Anticipate die and operation problems and work to eliminate them before they happen., • Participate in, and support lean initiatives such as continuous improvement events and problem solving events, identifying and eliminating all types of waste, • Suggest and implement ideas to increase personal and departmental efficiency. Communicate potential cost savings to other Technicians and Manager., • Make the necessary sample parts and submit them to the metrology lab for layout., • Use and maintain quality tools such as calipers, micrometers, height gages, solid squares, pin gages, dial indicators, Joe blocks, 1-2-3 blocks, machine parallels, angle plates, sine plates, V-blocks, precision vices, protractors, feeler gages, radius gages, and telescoping gages., • Verify tooling components for accuracy before use, including using the layout on tooling detail prints to verify tooling accuracy. Verify that parts produced are manufactured according to requirements; document as needed per control plan., • Examine forms for thinning and hard mark areas, implementing tooling changes as needed., • Consistently adhere to, and support, company policies and procedures, including ISO, TS 16949 and safety regulations., • Safely use hi-lo and cranes, maintaining licenses, maintenance schedules, and inspection sheets. Use overhead crane to dry run dies, checking for interference between upper and lower die shoes. If interference is found, notify a Die Tech I of the inaccuracy immediately so the interference can be adjusted accordingly., • Follow all safety procedures, including Personal Protective Equipment (PPE), controls, safety devices, lock-out/tag-out, use of coolants, and die block procedures. Identify potential safety issues and take appropriate action. Ensure environment is free of avoidable risks, and report concerns immediately, taking appropriate action to immediately rectify and resolve., • Effectively communicate with co-workers and management personnel to enhance teamwork and communication initiatives. Provide necessary, accurate, and timely feedback of all pertinent information to co-workers and management, including training and validating/appraising work of other Die Technicians at lower levels., • Train new and existing employees on all aspects of Tool & Die build and repair, using Training Checklists as a guideline. Mentor new and existing employees in areas of needed skill development as appropriate to job duties and requirements., • Know tooling and capability run dates, and communicate any information that would prevent those dates from being met., • Consistently exhibit appropriate attendance habits, working the hours necessary to perform the job, and being at the work station on time at beginning of shift and after breaks, working until end of shift., • Accept instructions and duties in a positive manner, while treating all co-workers with dignity and respect. Seek clarification for complete understanding, and process information for job independence and elimination of waste., • A competitive total compensation including a comprehensive benefit plan including premium medical and prescription coverage starting at just $5.00 per week for employee coverage, dental, vision, 401(k) with company match, and tuition reimbursement., • A safe, team oriented work environment with a leadership team that treats you like family and values your input, • An opportunity to participate in shaping the success of the organization through continuous improvement and problem solving events, • A positive work/life balance, • An opportunity for career growth - Over 70% of our leaders have been promoted from within Job Posted by ApplicantPro

Job Description Are you passionate about making a difference on the production floor? Do you enjoy training and mentoring others to help achieve long-term goals? We are seeking a flexible individual available to transition between 2nd and 3rd shift with advance notice. POSITION SUMMARY: Primary responsibilities include providing leadership to production personnel on the operating floor and demonstrating excellence in commitment to our safety and quality initiatives. The Production Supervisor is responsible for coaching, training, and developing direct reports in safety, quality, production, problem-solving, and technical skills involved in operating the production floor. The superintendent is responsible for communicating and working with other department managers, the Production Management team, and Customer Service to ensure that quality and on-time production goals are met. Responsibilities: • Maintain Safety and compliance within the plant, • Achieve quality initiatives by leading processes to ensure the lowest cost and best quality, • Minimizing waste within the department by driving awareness, training, and accountability, • Drive the 5s Initiatives/housekeeping, • Drive maximum throughput within the department by increasing uptimes and machine speeds, • Work with the Maintenance team to maintain machine cleanliness and the PM schedule, • Review and analyze production reporting for accuracy., • Coach and develop employees to maximize effectiveness, • Identifies systems and procedures designed to improve operations and makes necessary recommendations, • Performs other related duties as required MUST HAVE: • High school graduate or equivalent, • Eight or more years in a corrugated manufacturing environment, • Five or more years of leadership experience, • Customer service-related experience, or equivalent training and experience in other plant operations, • The ability to take initiative, maintain confidentiality, meet deadlines, and work in a team environment is essential, • Basic computer experience (word processing, Excel, and PowerPoint) INHMP

Job Description We are all equally human. Join us. At Hope Network, over 2,800 compassionate professionals serve individuals across 125+ locations statewide—each playing a vital role in creating powerful comebacks. Whether through hands-on care or essential behind-the-scenes support, every team member contributes to a greater purpose: transforming lives. ▶️Watch how we create comebacks. What You’ll Do • Partner with process owners and teams to foster a culture of process management, data-driven decision making, and continuous improvement aligned with Hope Network’s mission, vision, goals, and strategic objectives., • Facilitate, coach, train, and mentor teams in the use of process improvement tools, leveraging best practice across Hope Network to serve as a change agent to help solve complex challenges and achieve breakthrough improvements., • Ensure sustainable adoption of improvements by local process owners through strong process control and management, including process mapping, documentation, metrics, monitoring systems, and defined ownership., • Develop and refine process maps, workflows, and standard operating procedures to streamline operations, eliminate waste, and improve efficiency., • Drive measurable financial benefits for the organization, consumers, and funders through effective process improvement efforts., • Bachelor’s degree or equivalent combination of education and experience., • 4+ years of experience in Continuous Improvement, Lean, or Process Improvement., • Strong leadership, facilitation, and problem-solving skills with the ability to guide small to medium groups., • Proficiency in cost tracking, budgeting, and spreadsheet analysis., • Make a Meaningful Impact: Play a key role in driving positive changes that directly improve services and outcomes for the individuals and communities we serve., • Collaborative Environment: Partner with cross-functional teams and leaders who value innovation, problem-solving, and continuous learning., • Growth & Development: Gain exposure to diverse projects and opportunities to expand your Lean, Six Sigma, and process improvement expertise., • Mission-Driven Organization: Be part of an organization with a strong purpose—helping people live their best lives through healthcare, behavioral health, and human services. Our strength lies in our diversity—empowering us to meet the unique needs of over 34,000 individuals we serve each year. We are proud to be an Equal Opportunity Employer and value the diverse perspectives that each team member brings to our mission.

Job DescriptionDirector of FinanceWho We Are At Tech Defenders, we believe every device deserves a second life — and every organization deserves affordable access to reliable technology. As a fast-growing leader in IT Asset Disposition (ITAD) and technology lifecycle management, we partner with businesses, schools, and institutions nationwide to recover, refurbish, and redeploy devices, keeping tech out of landfills and helping budgets stretch further. We’re more than a technology company — we’re innovators, problem-solvers, and changemakers. Guided by our core values — Find a Way, Elevate Others, and See What You’re Capable Of — we’re building a culture where people grow, make an impact, and do meaningful work every day. Position Summary The Director of Finance is a key member of our executive leadership team. This role oversees all finance and accounting operations, leads a talented team, and provides strategic financial leadership to support Tech Defenders’ continued growth. We’re looking for a hands-on leader who thrives in a fast-paced environment, values collaboration, and is excited to build and develop a high-performing finance team. What You’ll Do Financial Operations & Reporting * Lead all accounting and finance processes with accuracy, efficiency, and compliance with GAAP. * Oversee invoicing, accounts receivable, expense cycle, and revenue recognition. * Prepare and present timely monthly and quarterly reports to leadership and ownership. * Manage bank, CPA, and insurance relationships. * Provide oversight for inventory costing, fixed asset management, and general ledger activities. * Hold department leaders accountable to budgets and support informed financial decision-making. Risk Management & Compliance * Maintain appropriate insurance coverage and manage financial risk exposure. * Ensure compliance with tax regulations and oversee audits and regulatory reporting. Strategic Leadership * Collaborate with the executive team to set business objectives and align financial strategies. * Drive the annual budgeting process and deliver financial insights to support growth. * Lead sales and operations planning, including monthly forecasting against budget. * Continuously improve financial systems, processes, and controls. * Identify opportunities to improve margins and reduce waste. Team Leadership & Development * Lead, mentor, and develop the Finance and Accounting team. * Recruit, train, and provide ongoing coaching to build a collaborative, high-performing culture. Foster professional growth through clear goals, accountability, and development plans. Technology & Systems * Leverage tools like NetSuite ERP, Google Workspace, Microsoft Office, and Concur to optimize finance operations. What We’re Looking For * Bachelor’s degree in Finance, Accounting, or related field (CPA or CMA required). 7+ years of progressive finance experience, with management required and executive leadership preferred. * Proven success managing accounting operations in a growth-oriented environment. * Strong knowledge of GAAP, risk management, and financial legislation. * Excellent leadership, communication, and problem-solving skills. * Ability to balance strategic vision with hands-on execution. What We Offer * 401(k) with company match. * Health, dental, vision, life, and disability insurance options. * Paid holidays, PTO, and paid volunteer time. * Tuition assistance after one year of service. * Discounted tech devices for family and friends. * Casual dress code, TD swag, and fun company events. * Growth opportunities and ongoing professional development support. Work Environment * Office-based environment. * Minimal travel required (<10%). If you’re ready to make a big impact and lead a finance team in a fast-growing, sustainability-driven company, we’d love to meet you. Apply today and see what you’re capable of at Tech Defenders! Equal Opportunity Employer

Job Description Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it’s what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what’s best. Stop and think: how would YOU put our drinks on every table? Position Description Reporting to the Plant Manager or Plant Director, the Manager Maintenance II is responsible for providing leadership for the maintenance functions, ensuring proper preventive maintenance of physical plant and all operating equipment, electrical troubleshooting, minimizing equipment downtime to provide maximum production capacity, and compliance with all Occupational Health and Safety regulations. Essential Job Functions: • Adhere to and ensure compliance to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and PPE requirements., • Adhere to and ensure compliance to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF)., • Leads and directs the work of other employees and has responsibility for personnel actions including hiring, performance management, and termination., • Provides training, direction and instruction and conducts performance evaluations., • Provides guidance and training on work standards and expected outcomes., • Accountable for planning and evaluating performance, staff training and development, recruitment and may contribute to pay recommendations., • Continuously improving manufacturing processes in terms of quality and performance measurements and identifying and eliminating bottleneck areas., • Seek to ensure reliability of plant and equipment operation while optimizing maintenance and operation costs and satisfying all safety, environmental etc. regulations in the process., • Assist the engineering team in the launch of new products and processes from an engineering perspective., • Manage contractors for any non-engineering project., • Identify and solve safety concerns encountered during design and study of manufacturing processes., • Devise hands-on improvement processes to reduce scrap and defects while improving throughput and document SOPs and the implementation of Best Practices into the facility. Coordinate the installation of new equipment to maximize production efficiency and maintainability., • Work with production to make modifications to equipment and work areas for maximum efficiency of operation., • Maintain a knowledge base in the capacity of existing utilities and the current level of utilization., • Oversee the maintenance of the equipment and the facility to ensure the company receives maximum utilization of its assets., • Ensure that systems are in place & followed to maintain reliability of the equipment & processes., • Keep written documentation of environmental compliance current., • Periodically prepare reports to satisfy environmental and safety regulations and ensure a safe and professional work environment., • Evaluates and recommends improvements to product manufacturability., • Ensure compliance to all OHSA and environmental regulatory and corporate standards. Investigate and identify root causes of any non-compliance., • Accountable for a safe working environment through the development of strategies focused on accident reduction as well as energy and waste minimization., • Oversee effective deployment of human resources throughout the plant and ensure the correct administration of the collective Bargaining Agreement if applicable., • Minimum of high school diploma or equivalent required. Undergraduate degree in a related field preferred., • Proficient in Excel, Word, SAP and Power Point., • Strong team player who is able to work across multiple functions., • Continuous learning and adaptability, regulatory compliance knowledge., • Ability to analyze and solve problems, results oriented., • Able to work under deadline pressures., • Leadership - Foster a culture of empowerment by building relationships based on trust, lead courageously on a day-to-day basis, and inspire growth with a clear and ambitious vision that guides the collective effort toward success., • Quality: Understanding of quality standards and requirements for manufactured products, implementation of quality control measures to ensure product consistency and reliability, collaboration with quality team to address related issues., • Continuous Improvement – Lead department process improvement through lean principles, team feedback, and CI events., • Troubleshooting – Skilled in resolving process and equipment issues to minimize downtime and waste., • Documentation Skills – Accurately record production data and maintain organized records., • Safety and Compliance – Ensure OSHA, environmental, and corporate compliance. Timely and accurate completion of monthly Alchemy training., • Communication Skills – Communicate effectively with direct reports and all levels of the organization. Collaborates to ensure smooth workflow. Follows equipment down-time escalation process., • Decision Making & Judgment – Make informed decisions with sometimes limited data, learning from outcomes., • People Management – coach others regardless of performance level; help others identify key goals and use their talents to achieve those goals; build relationships; offer praise and recognition., • Ownership – Proactively take initiative and responsibility for tasks and challenges, demonstrating independent thinking., • Problem Solving Skills – Develop creative solutions, evaluate results, and incorporate feedback for continuous improvement., • Work Schedule: Weekdays, weekends, afternoon, evenings, overnight and holidays may be required., • Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold. The environment is structured and supervised, with clear production targets and schedules to meet. Refresco is passionate about empowering leaders who reflect our core values and live by our leadership behaviors. These behaviors encourage effective leadership within the business, and focus on leading courageously, empowering individuals, and driving company growth as one team. Joining our team as a people manager means you’ll be encouraged to evolve as a leader who prioritizes the success of both you and your team, to deliver results, whilst bringing your authentic self to work. Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: • Medical/Dental/Vision Insurance, • Health Savings Accounts and Flexible Spending Accounts, • Life and AD&D Insurance, • Pet Insurance, • Legal Benefits, • 401(k) Savings Plan with Company Match, • 12 Paid Holidays, Vacation, and Paid Time Off, • Well-being Benefits Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages US, Inc. Refresco Beverages, US Inc., will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages US, Inc., and have been engaged in a search shall submit a résumé to the designated Refresco recruiter or, upon authorization, submit a résumé to this career site to be eligible for placement fees. Refresco Beverages US, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description EnSafe accepts applications for a Utilities Environmental Engineer based out of EnSafe’s client site(s) (location flexible but travel required). EnSafe is an employee-owned, global environmental consulting and engineering firm. We strive to provide innovative, creative solutions for our clients. EnSafe specializes in Environmental Management and Planning, Civil Design Engineering, Environmental Restoration, Natural & Water Resources, Health & Safety, and Technology, with offices operating within the U.S. What We Are Looking For: As a Utilities Environmental Engineer, you will provide multimedia environmental compliance support to utility-sector clients (electric distribution and/or generation). This role is designed for an early- to mid-career professional with at least 5 years of direct compliance experience who is ready to step into a client-facing “doer” role. You will work directly with utility partners to address regulatory requirements, solve technical problems, and implement compliance programs in fast-paced operational environments. What You Will Be Doing: • Supporting multimedia environmental compliance programs (water, waste, hazardous materials)., • Managing PCB compliance programs and advising clients on regulatory obligations., • Developing and implementing environmental management systems for utility operations., • Preparing reports, permits, and regulatory filings in accordance with state and federal requirements., • Conducting audits, inspections, and assessments to ensure ongoing compliance., • Providing guidance and authoring waste characterization, stormwater management, SPCC, and related reports/documents., • Partnering with client leadership to recommend and implement process improvements., • Bachelor’s degree in Environmental Engineering, Chemical Engineering, or related field., • Minimum of 3–4 years post-graduation experience; 5+ years preferred in multimedia environmental compliance., • Demonstrated knowledge of utility-sector environmental regulations (water, waste, PCB management)., • Strong technical writing skills with ability to prepare compliance reports and programs., • Ability to manage multiple projects with high diligence., • Experience working directly with utilities (distribution or generation) on compliance issues., • Familiarity with PCB management in utility operations., • Professional Engineer (PE) or Engineer-in-Training (EIT) credential., • Experience supporting multimedia compliance in consulting environments. EnSafe began as a two-person firm in 1980, navigating complex regulatory compliance issues on behalf of our clients. We nurture our people with growth and development opportunities. We build enduring, trustworthy relationships with each of our clients, with a focus on high ethical and safety standards. We build this reputation by attracting high-quality people and retaining them for the long term. At EnSafe, we are dedicated to fostering a diverse and authentic workplace, so if you are excited about this role but your experience does not align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles at our company. EnSafe is committed to being an EEO employer and all qualified candidates will receive consideration without regard to race, color, religion, national origin, citizenship, age (except for bona fide occupational qualifications), sex, disability, sexual orientation, gender identity, marital status, military or veteran status, any other status protected by federal, state, or local law, or association with a person on the basis of one or more of the foregoing. Check us out on the web at

Job Description Full Time (4) 10 hour shifts Monday - Thursday (6:30am-4:30pm) Comprehensive benefits package, and $1.00/hr Shift Differential Objective: Perform the duties of an Automatic Press Operator and assist with various production and documentation tasks, including enhancing production through continuous improvement and lean initiatives, and perform 5S duties in an exemplary manner according to the company quality policies Qualified candidates will possess the following Minimum Requirements: • High School Diploma or GED, • Minimum of nine months of experience setting up and operating automatic presses and troubleshooting dies, • Ability to prove mechanical inclination, computer literacy and general math knowledge through aptitude testing, • Willingness to attend off-site, job-related training classes, • Ability to multi-task and work in a fast paced environment, • Excellent work record (e.g. limited employee warnings), including attendance, • Willingness to train on and work on any shift, • Ability to lift 50 pounds Essential Functions: Standard Work: • Complete and be proficient in all requirements for the Automatic Press Operator Trainee position and independently run presses., • Prepare presses and work sites for set up. Follow set up instructions when setting up presses. Set up presses within all press categories, including preparing and adjusting straighteners; preparing, loading and adjusting feeders; aligning stock; assisting with transfer system set-up (adjusting finger positions, installing and homing rails, and setting pitch;) and preparing next set up (clean slugs and bolsters, and obtain fixtures)., • Prepare dies for installation, installing and removing dies in the press., • Operate the automatic presses, following general operator instructions and the control plans, including reading, understanding and completing all production paperwork, and reading, following and completing tags., • Monitor and maintain press fluid levels, changing lubricant and adjusting concentration of lubricant during both set-up and troubleshooting, and properly disposing of waste oil., • Verify the proper raw material stock against router and check sheets., • Load, remove, start, end and band steel coils., • Utilize various systems (intranet, Kanban, EAM) to obtain information pertinent to job tasks and to order materials as necessary., • Safely operate hi-los, overhead cranes, and die carts to load and unload steel coils, transport dies, move scrap, and transport finished product., • Provide direction and assist the personnel working an assigned to the press., • Troubleshoot presses (using Smart Pac, CNC computers, and controls) to ensure both quality and maximum levels of production. This includes poky-yoke, light curtains, and sensor readings as well as probing-ability., • Perform all tasks of a changeover., • Perform all aspects of coil changing safely (start of a coil, end of a coil, removing of a coil, banding a coil and calculating the remaining coil weight via Kanban or a weight change tag). This includes being able to skid a coil, end-up a coil and lift a coil)., • Use the Torch and Plasma cutter as needed., • Learn to modify and adjust existing programs of the press controls., • Assist in the training of APO trainees as needed. Quality: • Use snap calipers, micrometers, height gages, protractors, attribute gates, variable gages, taper gages, and/or ring gages to ensure quality production per the Control Plan., • Learn where to find and how to understand and complete sort instructions for any quality alerts., • Use drop gage and fixtures in accordance with policy and ensure they are in calibration., • Learn to run parts on the Coordinate Measuring Machine (CMM) and interpret the reports to verify the quality of parts sheet., • Find and follow inspection check sheets. Understand the variables and attributes that are recorded and know where to find the minimum and maximum variables on each check sheet., • Document procedures per the control plan, including visual inspections, first-piece and parts-in-process inspections, and Statistical Process Control (SPC) Charting, reporting any discrepancies to the Supervisor., • Follow all ISO/TS policies and procedures., • Consistently follow safety procedures during all phases of work: set up, installation of dies, loading material, operating presses, etc., • Use all necessary safety devices when handling a coil (hook, sling, or arm)., • Stack skidded coils safely, ensuring that the largest coils are on the bottom. Stand up coils safety and securely, with no coils being stood up that are less than the required minimum., • Use and verify safety blocks at any time necessary., • Use designated personal protective equipment for the work environment., • Participate in lean initiatives and continuous improvement and problem-solving events, applying lean manufacturing concepts to work methods (CIA's, quick set-up, standardized work, error-proofing) and identifying and attempting to eliminate all types of waste., • Anticipate problems and work to eliminate them before they happen., • Participate in the development and implementation of successful action plans to achieve temporary and permanent corrective actions, as needed., • Monitors press strokes per minute (SPM) and drive for continuous improvement., • Demonstrate good communication skills and competency when providing troubleshooting guidance to team members and when directing the work of others, such as Utility workers, Hi-lo Drivers, and others., • Provide necessary, accurate, and timely feedback of all pertinent information to co-workers, effectively communicating with Die Techs, Maintenance personnel, team members and management personnel to enhance teamwork and communication initiatives. Organization/Communication/Professionalism: • Effectively communicate with co-workers and management personnel to enhance teamwork and communication initiatives., • Provide necessary, accurate, and timely feedback of all pertinent information to co-workers and management., • Consistently exhibit appropriate attendance habits, working the hours necessary to perform the job., • Organize and maintain efficiency of personal work area., • Consistently adhere to, and support, company policies and procedures, including ISO, IATF 16949, and safety regulations., • Accept instructions and duties in a positive manner., • Treat all co-workers with dignity and respect., • Exhibit all the attributes of a positive role model (including professionalism, personal integrity, and positive attitude) for employees and managers to emulate., • A competitive total compensation including a comprehensive benefit plan including premium medical and prescription coverage starting at just $5.00 per week for employee coverage, dental, vision, 401(k) with company match, and tuition reimbursement., • A safe, team oriented work environment with a leadership team that treats you like family and values your input, • An opportunity to participate in shaping the success of the organization through continuous improvement and problem solving events, • A positive work/life balance, • An opportunity for career growth - Over 70% of our leaders have been promoted from within IMPORTANT- PLEASE READ COMPLETELY BEFORE SIGNING APPLICATION PRE-EMPLOYMENT STATEMENT Equal Opportunity Policy: We are an Equal Opportunity Employer. We will consider applicants for this position without regards to any category protected by applicable federal, or local law, including but not limited to: race, color, religion, sex, national origin, age, physical or mental disability, genetic information, veteran status, or uniformed service member status. Background Check and Release of Information: I hereby authorize P&C Inc. or its appointed investigative agencies to substantiate and verify my past employment, previous salary history, professional credentials, academic degrees and any other necessary references. I also authorize my previous schools, employers, and listed references to release to P&C Inc. or its appointed investigative agencies, any relevant information, including transcripts, that may be requested in connection with my employment. If employed, I authorize P&C to release salary and benefit data as necessary to meet business needs. I agree that P&C Inc. and my previous employers, schools, and references shall not be held liable if any employment offer is not tendered, is withdrawn, or my employment is terminated due to falsity or omissions in the information I have provided. Need for Accommodation: If I have a disability that requires accommodation to do my job, I must notify the company of that need, in writing, within 182 days after I know or reasonably should have known that I needed accommodation. Failure to do so will bar me from alleging that the company failed to accommodate me under Michigan (but not federal) law. Policies and Procedures: If employed by P&C Inc., I understand and agree that such employment is subject to the policies and procedures of the company. I understand and agree that any employment offer I might receive is contingent upon execution of the Confidentiality Agreement, I-9 and this application. I further agree to wear or use, when prescribed by the company, safety equipment or protective devices and to comply with all health and safety rules and reporting requirements. I agree to abide by all administrative policies of the company. Direct Deposit: I fully agree without fear or intimidation, coercion, or reprisal, to have any compensation that I receive directly deposited into the bank, credit union, or savings and loan association of my choice. I acknowledge that if I do not provide direct deposit information, compensation will be deposited to a pay card provided by the employer. Terms and Conditions: I understand that no statement in this form, related administrative policies, or an offer of employment is to be construed as an employment contract, and that either party, without the other's consent, may terminate the employment relationship at any time for any reason with or without cause or notice. Any agreement that varies the right of the employee or P&C to terminate the employment relationship at any time, with our without cause or notice, will be null and void. Limitation of Claims: If hired, in consideration of my employment, I agree to abide by the rules and policies of this company, including any changes from time to time, I agree that any lawsuit or claim against the company arising out of my employment or termination of employment (including but not limited to, claims arising from state, federal, or local civil rights laws) must be brought within the following time limits or forever be barred; (a) for lawsuits requiring a notice of rights to sue from the Equal Employment Opportunity Commission, within 90 days after the EEOC has issued that notice: or (b) for all other lawsuits, within (I) 180 days of the event(s) giving rise to the claim or (II) the time limited specified be the statute, whichever is shorter. I waive any statutes of limitations that exceeds this time limit. Confidential Agreement: I also understand and agree that I will not disclose or use any and all P&C confidential and proprietary information that I may acquire in the course of the recruitment process, in the course and scope of my employment, as well as after my employment with P&C. Pre-Employment Background Check: All applicants must pass a background check prior to beginning work. Refusal to allow the company to run a background check will result in disqualification of further employment consideration. I hereby affirm that the information provided on this employment application form and on my resume is true and complete to the best of my knowledge. I understand and agree that falsified information or omissions may result in termination from employment if discovered after my employment has begun, and that the offer of employment may be rescinded. With my signature on this application, I hereby agree to all terms above. Job Posted by ApplicantPro

Job Description Please note: This is an on-site position that requires the selected candidate to work from our Grand Rapids, MI, office. This is not a remote role; we follow a 9/80 onsite schedule, where every other Friday is off. Acron Aviation is a global leader in commercial aviation solutions - designed, engineered, and delivered by a team of passionate innovators redefining what’s possible in flight. From advanced avionics and flight data intelligence to world-class simulation and pilot training, we support aircraft operators and OEMs with the technology and expertise to fly safer, smarter, and more efficiently. Now, with a bold new identity, we’re building on a legacy of aviation excellence - unleashing fresh energy, modern thinking, and a customer-first mindset to meet the demands of today’s rapidly evolving aerospace industry. Welcome to Acron Aviation - where the future takes flight! Overview At Acron, our ambition is to relentlessly reimagine and reshape the value chains by which we deliver results to our customers, suppliers, and internal/external stakeholder communities in pursuit of innovations to create safer skies. Acron employees strive to achieve world-class results through our values of always putting our customers first, displaying ownership of our results in line with the founder, moving fast, and speaking candidly. We currently seek a Displays Product Line Manufacturing Supervisor who thrives in complex, cross-functional environments and is highly skilled in the application of Continuous Improvement, Lean, and Team Building processes to achieve our vision. This position is part of the Acron Avionics Business Unit and will be located in Grand Rapids, MI. The role requires the selected candidate to work on site during hours overlapping two shifts. We are seeking a dynamic Manufacturing Supervisor to lead, develop, and inspire a product line manufacturing team while driving continuous improvement and operational excellence. The ideal candidate is a transformational leader with demonstrated experience in Lean principles and continuous improvement methodologies, adept in using, teaching, and reinforcing SAP-based ERP automation tools, an influential leader of support functions needed to improve manufacturing, and a team builder driven to build cultures of excellence. This role is responsible for ensuring safe, high-quality, and efficient manufacturing flow systems while fostering a culture of accountability, problem-solving, and innovation. The Manufacturing Supervisor will be accountable for overseeing the daily operations of the production floor, ensuring that manufacturing processes run smoothly, efficiently, and cost-effectively. This role will focus heavily on implementing lean manufacturing principles, identifying and executing cost-reduction strategies, and enhancing labor efficiency. Key Responsibilities • Model servant leadership to inspire, foster, and reinforce the Acron values in the creation of a culture of agility, accountability, cross-functional collaboration, and continuous improvement., • Lead, coach, and develop assembly and technician team members to achieve safety, quality, delivery, continuous improvement, and cost targets to achieve employee engagement, on-time delivery, and EBITDA objectives. Ensure compliance with company policies, procedures, and safety standards., • Training and mentoring manufacturing teams in the use and application of SAP. Manufacturing supervisors are accountable for team development and engagement with SAP tools and data., • Lead daily Gemba sessions to monitor performance metrics, problem-solve variances to goals, and drive corrective actions to achieve product line objectives. Responsible for engaging cross-functional teams, including sales, customer support, engineering, quality, supply chain, finance, and maintenance, to implement corrective actions to issues surfaced in Gemba., • Champion the development, improvement, and reinforcement of employees and leader standard work for all activities in the assigned product line manufacturing cell. Ensure discipline and rigor in the practice of standard work. Work across product lines to harmonize standard work definitions where applicable., • Lead process optimization kaizens every week to develop, improve, and continually reinforce quality system and work instruction documentation. Drive employee engagement by involving teams in problem-solving and decision-making., • Develop, improve, and reinforce the application of performance metric dashboards for all key processes/activities within the assigned manufacturing cell., • Apply Lean tools and problem-solving methodologies to drive operational transformation. Identify and eliminate waste in processes with a focus on AI and automation where applicable., • Develop robust capacity modeling for all functions and shifts within assigned manufacturing cells. Ability to manage system capacity to account for SIOP policy setting through cross-training, flexible scheduling, etc., • Proven leadership experience in a manufacturing or industrial environment (minimum 2-3 years in a supervisor or lead role)., • Demonstrated success managing and developing teams., • Established results reflecting rigorous implementation of Lean tools and continuous improvement methodologies (Kaizen, 5S, Visual Management, Standard Work, Value Stream Mapping, A3 problem solving, etc.). Please be prepared to provide examples of work accomplished., • Experienced practitioner in SAP ERP and Manufacturing Shop Floor. Ability to train and develop employees in the tool., • Strong communication and interpersonal skills with the ability to influence and collaborate across departments., • Results-driven mindset with a track record of improving safety, quality, delivery, and cost metrics., • Bachelor’s degree in engineering, Business, Operations Management, or related field., • Formal Lean or Six Sigma training/certification., • Experience leading cultural transformations or implementing structured operating systems.