Trabajos welder en Little Rock, ArkansasCrear alertas

Job Description D7 Pneumatics LLC is seeking an experienced QA/QC Manager to support our fabrication shop and field operations based in Jonesboro, Arkansas. This position will begin on a part-time or as-needed basis, with the potential to develop into a full-time role based on workload and company growth. The QA/QC Manager will be responsible for implementing and maintaining D7’s Quality Control Program, supporting ASME and National Board Code work, and ensuring fabrication and field activities comply with approved procedures, project specifications and applicable codes. Key Responsibilities Administer and enforce the D7 Quality Control Manual and related procedures. Oversee quality activities for shop fabrication and field installations. Review contracts, drawings, specifications and project requirements before work begins. Confirm the applicable codes, standards, inspection requirements and testing procedures for each project. Maintain compliance with applicable ASME, National Board and pressure-piping requirements. Coordinate with Authorized Inspectors, client representatives, engineers and third-party inspection agencies. Verify that approved Welding Procedure Specifications are available and properly followed. Review and maintain WPS, PQR and Welder Performance Qualification records. Monitor welder qualifications and continuity. Verify material receiving, identification, storage and traceability. Review Material Test Reports and certificates of compliance. Maintain weld maps, weld logs, inspection reports and project turnover documentation. Establish and monitor inspection hold points. Perform or coordinate fit-up, visual welding and final inspections. Coordinate nondestructive examination, including RT, UT, MT and PT, when required. Ensure pressure testing is performed using approved procedures, calibrated equipment and proper safety controls. Monitor preheat, interpass temperature and postweld heat treatment when applicable. Manage nonconformance reports, corrective actions and weld-repair documentation. Maintain calibration records for inspection and testing equipment. Control Code stamps, data reports and quality records as assigned. Assist with ASME, National Board, Authorized Inspection Agency and client audits. Conduct internal quality audits and recommend improvements. Prepare complete and organized project turnover packages. Train supervisors, welders, fitters and shop personnel on applicable quality requirements. Maintain a professional, practical and safety-focused quality culture. Required Qualifications Previous QA/QC experience in industrial fabrication, pressure piping, power-generation, boiler or pressure-vessel work. Working knowledge of welding inspection and fabrication quality-control methods. Ability to read fabrication drawings, piping isometrics, P&IDs, weld maps and technical specifications. Knowledge of welding procedures, welder qualifications and material traceability. Experience administering inspection, examination and pressure-testing requirements. Strong documentation, organization and communication skills. Ability to work independently and coordinate effectively with project managers, supervisors, inspectors and clients. Proficiency with Microsoft Word, Excel, email and electronic recordkeeping. Willingness to support both Jonesboro shop operations and field projects as required. Preferred Qualifications Knowledge of ASME BPVC Sections I, II, V, VIII and IX. Knowledge of ASME B31.1 Power Piping and ASME B31.3 Process Piping. Experience with National Board Inspection Code repair and alteration requirements. Experience working under ASME U and S Certificates and a National Board R Certificate. AWS Certified Welding Inspector certification. ASNT or employer-based NDE qualifications. Experience dealing with Authorized Inspectors and jurisdictional authorities. Experience in power plants, pulp and paper facilities, steel mills, sawmills or other heavy-industrial facilities. Employment Structure This position is intended to begin as part-time or as-needed employment. Hours may increase based on active projects, shop workload and field requirements. The position has the potential to transition into a full-time QA/QC management role as D7’s Code fabrication and pressure-piping operations expand s.

About the Role \n \n \nJGM is looking for experienced Traveling Journeyman Welders to join our field construction teams on projects across the country. This is a 100% traveling, hands-on structural steel position performing welding, fit-up, and related ironwork on active industrial and commercial construction sites. \n \n \nYou'll work alongside ironworkers, foremen, and field leadership to complete structural steel connections safely, efficiently, and to project specifications. Candidates should be experienced with structural welding in field environments, comfortable working at heights, and able to consistently produce welds that meet inspection requirements. \n \n \nCompensation: \n \n\n • Start-$28.00 per hour\n, • Pass D1.1 -$31.00 per hour\n, • Pass D1.8-$34.00 per hour\n, • Additional based on company evaluation of performance up to $36.00 per hour\n\n \n \nWhat You'll Do \n \n \n\n • Perform structural steel welding on beams, columns, connections, reinforcement, and other structural members in accordance with project specifications and applicable AWS requirements.\n, • Weld in flat, horizontal, vertical, and overhead positions as required.\n, • Perform SMAW (Stick) and FCAW welding commonly used in structural steel erection and field construction.\n, • Read and interpret structural drawings, erection drawings, weld symbols, and connection details.\n, • Fit, tack, and prepare structural members and connections prior to final welding.\n, • Set up and operate welding equipment using the appropriate electrodes, wire, amperage, and settings for the application.\n, • Inspect your own work for weld quality, proper profile, undercut, porosity, and other potential defects before QC inspection.\n, • Complete weld repairs or corrections identified by a CWI or QC inspector.\n, • Pass required welder qualification/WPQ testing for applicable welding processes and positions.\n, • Assist with structural steel erection, bolt-up, connecting, rigging, and other field activities as needed.\n, • Follow all site-specific safety requirements, including fall protection, hot work, fire prevention, and steel erection procedures.\n, • Maintain welding equipment, leads, tools, and PPE in safe working condition.\n, • Travel between JGM project sites as assignments and project schedules require.\n\n \n \nWhat You Bring \n \n \n\n • Minimum 5 years of structural steel welding experience , preferably in field construction or steel erection.\n, • Demonstrated ability to produce quality structural welds in multiple positions.\n, • Experience with SMAW and/or FCAW welding processes.\n, • AWS D1.1 structural welding experience strongly preferred.\n, • Ability to read structural drawings, weld symbols, and connection details.\n, • Ability and willingness to pass JGM and/or project-specific weld tests prior to beginning work.\n, • Experience working around structural steel erection, cranes, rigging operations, and active construction equipment.\n, • Comfortable working at heights and using required fall-protection systems.\n, • Ability to safely perform physically demanding work for extended shifts.\n, • Willing and able to travel 100% , including extended assignments away from home and movement between projects as needed.\n, • Valid driver's license and reliable transportation.\n, • Ability to pass required background screening and drug testing.\n, • Dependable, safety-focused, and able to work effectively with limited supervision.\n\n \n \nPhysical Requirements & Work Environment \n \n \n\n • Work may be performed in both indoor and outdoor construction environments , depending on the project.\n, • Regularly required to climb, balance, bend, stoop, kneel, crouch, and work at elevated heights.\n, • Ability to lift and carry up to 50 lbs. , including welding equipment, leads, tools, and materials.\n, • Ability to remain on your feet and perform physically demanding work for extended periods, including 10-12 hour shifts when required.\n, • Must wear all required PPE, including welding hood, flame-resistant clothing, safety-toed boots, gloves, hearing protection, hard hat, safety glasses, and fall-protection equipment.\n, • Regular exposure to welding fumes, sparks, heat, noise, moving equipment, and other conditions typical of active structural steel construction sites.\n, • Vision must be sufficient, with or without correction, to evaluate fit-up, joint alignment, and weld quality.\n\n \n \nWhy JGM \n \n \nJGM is an AISC-certified structural steel fabricator and industrial construction company with deep Pennsylvania roots and projects throughout the country. Our field teams perform challenging structural steel and industrial construction work for some of the nation's leading companies. \n \n \n This role offers the opportunity to work on long-term projects, build your field experience, and continue traveling with JGM as projects move across the country. \n \n \nWhat We Offer \n \n \n\n • Competitive pay based on experience and qualifications\n, • Per diem for qualifying traveling assignments\n, • Travel assistance/reimbursement in accordance with project requirements\n, • Consistent opportunities across JGM field projects\n, • Training and support toward OSHA and project-specific safety certifications\n, • Long-term opportunities for skilled welders who want to grow with JGM\n

About the Role \n \n \n JGM is looking for an experienced, AWS-Certified Welding Inspector to join our Quality team as a Traveling CWI. This is a 100% field-based, traveling role - you'll be on the road and on active erection sites across the country, testing welders, inspecting structural steel welds, and making sure the paperwork behind every joint holds up to code. You'll work directly with erectors, welders, project engineers, and outside inspection agencies at each site to keep quality on track from first pass to final sign-off, then move on to the next project. \n \n \nWhat You'll Do \n \n\n • Perform visual and dimensional weld inspections on structural steel members in accordance with AWS D1.1, AISC 360, and applicable project specifications.\n, • Conduct welder performance qualification (WPQ) testing and verify Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) are current and being followed correctly.\n, • Test and requalify welders as needed, and maintain accurate, up-to-date qualification records for all welding personnel.\n, • Review erection drawings, weld maps, and specifications to confirm welds and fit-up meet design intent during field erection.\n, • Coordinate visual inspection and review resulting reports for completeness and accuracy, as well as third party UT inspections as needed.\n, • Document all inspections, non-conformances, and corrective actions clearly and thoroughly - inspection reports, weld logs, NCRs, and daily QC reports that hold up to client and AHJ scrutiny.\n, • Assemble and maintain quality documentation packages (mill certs, WPS/PQR/WPQ records, NDE reports, inspection reports) for project turnover and client submittal.\n, • Serve as the on-site point of contact for third-party inspectors, AHJs, and client quality representatives; help resolve field and shop welding issues in real time.\n, • Flag discrepancies between project specifications and code minimums, and loop in the Director of Quality on anything outside your authority to resolve.\n, • Support root cause analysis and corrective action reporting when quality issues come up.\n, • Travel continuously between active job sites nationwide as project schedules require, often on short notice and for extended durations.\n\n \n \nWhat You Bring \n \n\n • Current AWS Certified Welding Inspector (CWI) certification - required.\n, • Minimum of 3-5 years of hands-on weld inspection experience in structural steel fabrication and/or erection.\n, • Solid working knowledge of AWS D1.1 Structural Welding Code and AISC fabrication/erection standards; familiarity with ASTM material specifications.\n, • Experience testing and qualifying welders, and reviewing/verifying WPS, PQR, and WPQ documentation.\n, • Comfortable reading structural drawings, weld symbols, and connection details, and catching discrepancies before they become field problems.\n, • Strong written communication - your inspection reports and NCRs need to be clear enough that anyone downstream understands the issue and the fix.\n, • Proficient with Microsoft Office (Word, Excel, Outlook); comfortable picking up project documentation or QC tracking software.\n, • Willing and able to travel 100% of the time, including extended overnight and multi-week assignments away from home, with a valid driver's license.\n, • Able to pass a background check and drug screen; JGM is a drug-free workplace.\n, • Additional certifications a plus: ASNT Level II (UT/MT/PT), AISC/IAS fabricator inspection experience.\n\n \n \nPhysical Requirements & Work Environment \n \n\n • Regularly works outdoors on active construction/erection sites, in varying weather and temperatures, at a different site or region as assignments rotate.\n, • Ability to climb, balance, stoop, kneel, crouch, and work at heights while following all fall-protection and site safety requirements.\n, • Ability to lift and carry up to 50 lbs. and remain on your feet for extended periods.\n, • Required to wear all applicable PPE (safety-toed footwear, gloves, safety glasses, hearing protection, hard hat, high-visibility vest, etc.).\n, • Good vision (corrected or uncorrected) sufficient to detect weld defects, read gauges, and interpret drawings; ability to work in areas with dirt, dust, fumes, and noise typical of a fab shop or job site.\n\n \n \nWhy JGM \n \n \n JGM is an AISC-certified structural steel fabricator and industrial construction company with deep Pennsylvania roots and a national field footprint. We take pride in the work that leaves our shops and the crews who put it in place - this role sits right at the center of that, making sure every weld we sign off on is one we'd stand behind. \n \n\n • Competitive pay, commensurate with experience\n, • Medical, dental, and vision coverage\n, • Paid time off and holidays\n, • Travel and per diem covered per company policy - this is a fully field-based traveling role\n, • Training and support toward continuing certifications\n

Job Description About the Role JGM is looking for experienced Traveling Journeyman Welders to join our field construction teams on projects across the country. This is a 100% traveling, hands-on structural steel position performing welding, fit-up, and related ironwork on active industrial and commercial construction sites. You’ll work alongside ironworkers, foremen, and field leadership to complete structural steel connections safely, efficiently, and to project specifications. Candidates should be experienced with structural welding in field environments, comfortable working at heights, and able to consistently produce welds that meet inspection requirements. What You’ll Do • Perform structural steel welding on beams, columns, connections, reinforcement, and other structural members in accordance with project specifications and applicable AWS requirements., • Weld in flat, horizontal, vertical, and overhead positions as required., • Perform SMAW (Stick) and FCAW welding commonly used in structural steel erection and field construction., • Read and interpret structural drawings, erection drawings, weld symbols, and connection details., • Fit, tack, and prepare structural members and connections prior to final welding., • Set up and operate welding equipment using the appropriate electrodes, wire, amperage, and settings for the application., • Inspect your own work for weld quality, proper profile, undercut, porosity, and other potential defects before QC inspection., • Complete weld repairs or corrections identified by a CWI or QC inspector., • Pass required welder qualification/WPQ testing for applicable welding processes and positions., • Assist with structural steel erection, bolt-up, connecting, rigging, and other field activities as needed., • Follow all site-specific safety requirements, including fall protection, hot work, fire prevention, and steel erection procedures., • Maintain welding equipment, leads, tools, and PPE in safe working condition., • Travel between JGM project sites as assignments and project schedules require. What You Bring • Minimum 3 years of structural steel welding experience, preferably in field construction or steel erection., • Demonstrated ability to produce quality structural welds in multiple positions., • Experience with SMAW and/or FCAW welding processes., • AWS D1.1 structural welding experience strongly preferred., • Ability to read structural drawings, weld symbols, and connection details., • Ability and willingness to pass JGM and/or project-specific weld tests prior to beginning work., • Experience working around structural steel erection, cranes, rigging operations, and active construction equipment., • Comfortable working at heights and using required fall-protection systems., • Ability to safely perform physically demanding work for extended shifts., • Willing and able to travel 100%, including extended assignments away from home and movement between projects as needed., • Valid driver’s license and reliable transportation., • Ability to pass required background screening and drug testing., • Dependable, safety-focused, and able to work effectively with limited supervision. Physical Requirements & Work Environment • Work may be performed in both indoor and outdoor construction environments, depending on the project., • Regularly required to climb, balance, bend, stoop, kneel, crouch, and work at elevated heights., • Ability to lift and carry up to 50 lbs., including welding equipment, leads, tools, and materials., • Ability to remain on your feet and perform physically demanding work for extended periods, including 10–12 hour shifts when required., • Must wear all required PPE, including welding hood, flame-resistant clothing, safety-toed boots, gloves, hearing protection, hard hat, safety glasses, and fall-protection equipment., • Regular exposure to welding fumes, sparks, heat, noise, moving equipment, and other conditions typical of active structural steel construction sites., • Vision must be sufficient, with or without correction, to evaluate fit-up, joint alignment, and weld quality. Why JGM JGM is an AISC-certified structural steel fabricator and industrial construction company with deep Pennsylvania roots and projects throughout the country. Our field teams perform challenging structural steel and industrial construction work for some of the nation’s leading companies. This role offers the opportunity to work on long-term projects, build your field experience, and continue traveling with JGM as projects move across the country. What We Offer • Competitive pay based on experience and qualifications, • Per diem for qualifying traveling assignments, • Travel assistance/reimbursement in accordance with project requirements, • Consistent opportunities across JGM field projects, • Training and support toward OSHA and project-specific safety certifications, • Long-term opportunities for skilled welders who want to grow with JGM

Baldwin & Shell Construction Company is searching for experienced Ironworkers to join our Industrial Services Team. This position will work in the Little Rock metro area. This is a full-time position with standard work hours, but hours can vary depending on the project time frame. The Ironworker is responsible for laying out and fabricating structural steel and sheet metal. You will report directly to the Assistant Superintendent or Superintendent. As a core company member, you will be expected to be professional, polite, friendly, reliable, and attentive while also being accurate. You should always be prepared, organized, and responsive, willing to meet each challenge directly while not being afraid to ask for help when needed. • Study specifications in blueprints to determine the locations, quantities, or sizes of materials required and work requirements., • Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors., • Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place., • Cut, bend or weld steel pieces using the appropriate tools., • Follow established safety rules and regulations to maintain a safe and clean environment., • 1-3 years of Metal Building experience required., • Be available to work overtime and possibly weekends., • Welding certifications not required but preferred., • The ability to read and adhere to labels, safety warnings, and guidelines., • Be able to pass a background check and pre-employment drug test., • Effective at both verbal and written communication., • Pursuant to the Arkansas Medical Marijuana Act 593, this position is a designated safety-sensitive position according to Baldwin & Shell standards and processes. What we offer: • Highly competitive compensation, • Health, Dental, and Vision insurance, • 8 Paid holidays, • Vacation accrual, • 401(k) Retirement Savings Plan with company matching contributions, • Short-term disability, • Maternity and Paternity Leave, • Pet insurance, • Free & confidential Employee Assistance Program, • Excellent work environment Baldwin & Shell is proud to offer highly competitive compensation, benefits package, and a family work environment! If you think you would thrive in this position, please apply with us today! For more information or questions, please reach out to our Human Resources Team: • Email: info@baldwinshell.com ATTN: HR, • Phone: 501-374-8677 Baldwin & Shell is a drug-free workplace and an E-Verify participant. Baldwin & Shell is proud to be a part of an Equal Opportunity Employer to include women, minorities, veterans, persons with disabilities, color, sex, sexual orientation, gender identity, religion, origin, and genetic information. All are encouraged to apply!

Location: 3706 E. Washington Avenue, North Little Rock, AR, 72114, United States Base Pay: $20.00 - $25.00 / Hour Job Category: Full Time Industry: Manufacturing Employee Type: FT Manage Others: No Minimum Experience: 5 Years Maximum Experience: 7 Years Contact Information Name: Miller Grimmett Email: mgrimmett@halltank.com Description Requirements Summary

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do but also about each other. We are the makers, problem solvers, and future world builders who are creating Welder, 3rd Shift, Apprentice, Operations, Welding, Manufacturing

Job DescriptionCDR General Services is seeking a skilled and experienced Combo Welder/Fitter to join our team in Paducah, KY. The ideal candidate will have strong hands-on experience performing both welding and fitting, with a background in barge repair or marine fabrication. Candidates must be able to read and interpret blueprints and technical drawings and safely use welding, hand, power, and cutting equipment in an industrial environment. Job Details • Job Type: Full-Time, • Job Location: Paducah, KY, • Pay Rate: $31.00 per hour Key Responsibilities • Perform both welding and fitting duties on marine and industrial structures., • Perform fabrication and repair work related to barge repair and marine fabrication., • Read and interpret blueprints, technical drawings, and welding specifications., • Measure, align, fit, tack, and assemble metal components according to specifications., • Perform welding using appropriate welding processes and techniques., • Use welding equipment, hand tools, power tools, and cutting equipment safely and effectively., • Inspect completed welds and fabricated components for quality, accuracy, and proper fit., • Make adjustments as needed to ensure proper alignment and weld quality., • Follow all required safety procedures and maintain a clean and organized work area., • Work independently and as part of a team to complete projects efficiently., • Perform other related welding and fitting duties as assigned. Qualifications • Minimum 2+ years of experience as a Combo Welder/Fitter required., • Minimum 2+ years of experience in barge repair or marine fabrication required., • Proven hands-on experience performing both welding and fitting work., • Ability to read and interpret blueprints and technical drawings., • Proficient with hand tools, power tools, welding equipment, and cutting equipment., • Strong knowledge of metal fabrication, fitting, alignment, and welding., • Strong attention to detail and commitment to quality and safety., • Dependable, punctual, and able to work effectively in a fast-paced environment., • Must have reliable transportation to and from the job site., • Must be available to work overtime as needed.

Job Description We are seeking a Welder to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Conduct tests to evaluate weld quality and tolerance Qualifications: • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workloadCompany DescriptionG1 Staffing is a temporary staffing and recruiting agency in North Little Rock. We have built our 60+ years of experience on the importance of honor, courage, and commitment. G1 Staffing is locally owned and operated resulting in a more personalized experience and prompt service or assistance.G1 Staffing is a temporary staffing and recruiting agency in North Little Rock. We have built our 60+ years of experience on the importance of honor, courage, and commitment. G1 Staffing is locally owned and operated resulting in a more personalized experience and prompt service or assistance.

Job Description We’re seeking experienced Pipe Welders for ongoing projects in the Little Rock, Arkansas area, including commercial and industrial facilities. Job Details: • Projects include large-scale commercial builds., • Duration: a few weeks to a few months, with potential to increase., • Work may include additional mechanical duties when welding isn’t required. Requirements: • Must hold a valid Arkansas plumbing license., • Must pass an in-house weld test prior to approval for work., • OSHA 10 Certification., • Strong work ethic.

Job Description Multiple shop locations in Arkansas and Louisiana The Structural Flux Core Welder is responsible for performing high-quality FCAW (Flux Core Arc Welding) on structural steel components in a fabrication shop environment. This position reads blueprints and welding symbols, fits and welds structural assemblies to specification, and ensures all work meets AWS, customer, and company quality standards. The Structural Flux Core Welder safely operates welding equipment, maintains productivity, performs visual weld inspections, and follows all OSHA, QA/QC, and safety procedures while supporting the fabrication of heavy industrial steel products.

Job Description Multiple shop locations in Arkansas and Louisiana The Sub Arc Welder is responsible for performing high-quality submerged arc (SAW) welding on structural steel components in a fabrication shop environment. This position interprets welding symbols and blueprints, sets up and operates SAW equipment, produces welds that meet company and customer quality standards, and works safely while maintaining production schedules. The Sub Arc Welder inspects completed welds, performs minor equipment maintenance, and follows all OSHA, QA/QC, and company safety procedures to support the fabrication of heavy industrial steel products. Experience with Lincoln LT7 Tractor model (training provided).

WelderOur Core Values: Guided by Safety. The Welder is responsible for welding in the garage.

Welder Overview:Embark on an exciting journey as a welder, where you'll fuse fabricated components to create robust structural forms. Welder Pay Range:$15-$25/hrPaid weeklyWelder Essential Duties and Responsibilities:Receive and understand welding symbols and select proper welding material needed to

Welder Position at LexiconAre you ready to start "Building America?" At Lexicon, we're seeking a skilled welder to join our team and be a part of our continued success. Welder Overview:Embark on an exciting journey as a welder, where you'll fuse fabricated components to create robust structural form

TIG WelderLittle Rock, ARThis is an amazing opportunity for a skilled TIG Welder to earn $20 to $24 hourly on 1st Shift 7:00AM-3:30PM Monday-Friday. Shift - Chance to showcase strong welding skills and attention to detail - Ability to work on precision fabrication projects with various metals - Oppo

Welder ApprenticeYour Work Shapes the World at Caterpillar Inc. This is a terrific opportunity to join the Caterpillar North Little Rock AR team as a Welder Apprentice on our 2nd shift team earning day ONE benefits and a starting wage of $21. Candidates must pass the following Welder Qualification T

WelderAt Lexicon, we're seeking a skilled welder to join our team and be a part of our continued success. Welder Overview:Embark on an exciting journey as a welder, where you'll fuse fabricated components to create robust structural forms. Welder Pay Range:$15-$25hrPaid WEEKLYWelder Essential Duties

Welder ApprenticeYour Work Shapes the World at Caterpillar Inc. This is a terrific opportunity to join the Caterpillar North Little Rock AR team as a Welder Apprentice our 3RD shift team (11 p. Candidates must pass the following Welder Qualification Tests at the completion of a Caterpillar provided

Baldwin & Shell Construction Company is searching for experienced Ironworkers to join our Industrial Services Team.This position will work in the Little Rock metro area.This is a full-time position with standard work hours, but hours can vary depending on the project time frame.The Ironworker is res