Trabajos commercial maintenance en LutonCrear alertas

Do you want to work to make Power for Good? We're the world's largest independent renewable energy company. We're guided by a simple yet powerful vision: to create a future where everyone has access to affordable, zero carbon energy. We know that achieving our ambitions would be impossible without our people. Because we're tackling some of the world's toughest problems, we need the very best people to help us. They're our most important asset so that's why we continually invest in them. RES is a family with a diverse workforce, and we are dedicated to the personal professional growth of our people, no matter what stage of their career they're at. We can promise you rewarding work which makes a real impact, the chance to learn from inspiring colleagues from across a growing, global network and opportunities to grow personally and professionally. Our competitive package offers rewards and benefits including pension schemes, flexible working, and top-down emphasis on better work-life balance. We also offer private healthcare, discounted green travel, 24 days holiday (with an additional discretionary day given by the company) with options to buy/sell days, enhanced family leave and four volunteering days per year so you can make an impact somewhere else. The Position The Field Expert Technician (Comms) is a field-based role performing specialist services on the Communications and SCADA systems of battery storage and solar PV plants. You will be part of a team of industry-leading inverter specialists that support our wider O&M team in delivering exceptional plant performance and also provide on-site intervention for asset owners on plants external to our O&M portfolio. You will be a qualified electrician with experience maintaining MW-scale power plants, with a keen interest in working on communications and SCADA systems. This is a permanent role and an overtime system is in place. A company vehicle, smart phone and laptop/tablet will be provided. RES provides a comprehensive package of benefits including contributory pension, private health insurance and investment in role-specific training, and as a Specialist Technician (Comms), you will be supported in receiving all relevant manufacturer training to allow us to deliver this service. Key Accountabilities Provide remote troubleshooting and on-site support to O&M technicians in rectification of faults on the portfolio’s Communications and SCADA systems Support the regional O&M teams on-site with corrective and preventive maintenance where required Contribute to the internal knowledge base in relation to comms and SCADA, and share knowledge across the wider team Develop method statements in collaboration with the Operations Manager, HSQE Team and Comms/SCADA SpecialistsIdentify any knowledge and training gaps, and put forward relevant training courses to assist the team with upskilling Identify and propose upgrades to the specialist systems (considering obsolescence and reliability) Support the Performance Analysts and SMART team in developing API connections to new sites as required Any other duties, for example with other specialist systems as required by the business needs Knowledge Good knowledge and understanding of solar PV technology Knowledge of central inverters is essential Technical understanding of AC and DC systems within utility-scale solar farms Good knowledge and understanding of SCADA, instrumentation and communications networks is rerquired Good knowledge and understanding of HVAC, fire protection, security systems is desirable Good knowledge and understanding of battery storage technology, although training can be given in this area Skills Approach to safe working practices Excellent communication skills, fluent written and spoken English Able to respond to changing priorities and emergent issues Enthusiasm for personal development Able to read and interpret schematic diagrams and technical manuals Computer skills for writing reports, reporting progress and communicating by email Passion, Accountability, Collaboration, and Excellence Experience Experience, reading, writing and amending Risk Assessments and Method Statements Experience working with equipment vendors to support diagnosis of faults DC and LV installation, fault finding, testing and commissioning Experience working remotely Solar PV installation and O&M experience (MW-scale or large commercial ground-mount) Battery storage installation and O&M experience (MW-scale) is desirable Experience installing or maintaining ethernet and fibre optic communications Experience working with SCADA or data monitoring systems Work with Central inverters Work with High Voltage switchgear Qualifications Full UK driving license Qualified Electrician Inspection and testing qualifications (C&G 2391 or 2394/5) highly valued First aid qualifications Health & Safety qualifications (e.g. IOSH Managing Safely, SMSTS) At RES we celebrate difference as we know it makes our company a great place to work. Encouraging applicants with different backgrounds, ideas and points of view, we create teams who work together to solve complex problems and design practical solutions for our clients. Our multiple perspectives come from many sources including the diverse ethnicity, culture, gender, nationality, age, sex, sexual orientation, gender identity and expression, disability, marital status, parental status, education, social background and life experience of our people. #LI-TS1#HYBRID

Business Development Manager £DOE Merseyside Our Client Our client is an award-winning family run construction business based in Merseyside. They support housing associations, outsourced service providers, insurers and domestic customers with emergency and planned repair and maintenance services. Having achieved consistent year-on-year growth and with recent investment secured to support further expansion, the company is now poised to scale its operations across new sectors and geographical regions. The Role This newly created position represents a critical hire for the organisation as it enters its next phase of strategic growth. The Business Development Manager will take ownership of defining a clear sales strategy, aimed at strengthening the company's position within the social housing market and accessing new framework opportunities in sectors such as education, local authorities, prisons, and retail. The successful candidate will be responsible for identifying and securing new business opportunities. This will involve building and managing a robust sales pipeline, proactively engaging new and existing clients, and developing tailored solutions that deliver long-term value for both the business and its customers. The role requires a dynamic and driven individual with a commercial mindset and a proven track record in sales or business development, ideally with a background within construction, building or facilities management sectors. A strong understanding of framework agreements, public sector procurement, and stakeholder engagement is essential, along with the ability to communicate effectively at all levels and influence decision-makers. Working closely with senior leadership and cross-functional teams, the Business Development Manager will play a key role in ensuring smooth transitions from sales to service delivery, maintaining positive client relationships and contributing to the company's reputation for professionalism and quality. This is an exciting opportunity for a strategic, entrepreneurial sales professional to join a fast-paced, high-growth organisation and make a significant impact on their next phase of development. To Apply This is an excellent opportunity in a challenging, fast paced and dynamic business. Interested parties should apply accordingly or contact Mike Pritchard-Howarth in the first instance for a confidential conversation. Contact details can be found via the Newman Stewart website. About Us Newman Stewart is a boutique executive search firm, delivering high-performing candidates to high-profile and mission-critical assignments. With a proven track record of success globally, we are the recruitment partner of choice to many blue chip, medium and small organisations, providing Executive Search, Management Selection and Psychometric Assessment Services to its clients.

For Repair Care UK, we are looking for a Specification Account Manager area London North. In this role, you are responsible for developing and influencing specification opportunities within the construction, refurbishment and heritage sectors. You build relationships with architects, surveyors, large and national contractors, housing providers and heritage organisations, with the goal of turning early project involvement into contractor engagement and product usage. How you make the difference As Specification Account Manager, you play a key role in positioning Repair Care’s solutions at the front end of the market. You influence projects from design stage through to completion and ensure the right stakeholders are connected throughout the process. By combining market knowledge, relationship building and commercial follow-up, you help expand Repair Care’s presence and convert specification opportunities into business. What your agenda looks like • Build relationships with architects, surveyors, heritage organisations and other specifiers, • Influence refurbishment and construction projects from design stage through to completion, • Track projects and support conversion from specification to contractor engagement and product use, • Work with contractors, housing providers, local authorities, developers, merchants and distributors, • Deliver CPD presentations, technical presentations and toolbox talks, • Promote training programmes and support the growth of trained contractor networks, • Maintain project tracking, customer information and reporting in Salesforce, • Represent Repair Care in the market through industry events, professional networking and digital visibility Your team You work closely with Technical Account Managers, distributor partners and internal colleagues across the commercial organisation. Together, you support regional growth, contractor engagement and successful project conversion. You report to the Senior Specification Account Manager / UK & Export General Manager. What makes you a great fit • Experience in specification development, construction sales or contractor engagement, • Experience building relationships with architects, surveyors, contractors or similar stakeholders, • Understanding of construction processes and specification development, • Familiarity with tools such as NBS is an advantage, • Knowledge of timber repair or restoration solutions is beneficial, • Strong relationship-building and networking skills, • Commercial awareness and ability to track projects effectively, • Strong communication and presentation skills, • Well organised and disciplined in activity management and CRM usage What’s in it for you • Joining a close-knit and supportive team with a strong collaborative culture, • Working for a premium brand with an excellent reputation in the market, • Being trusted with real autonomy to manage and grow your territory, • Receiving high-quality training and ongoing development to build your commercial and technical expertise, • Having the opportunity to make a visible impact in a growing business where your contribution is recognised, • Working within an international group environment through Bolton, providing exposure to broader business initiatives and best practice, • Enjoying variety and independence in a field-based role where no two days are the same, • We believe in empowering our people, recognising performance, and creating an environment where talented individuals can thrive. About Bolton Bolton Group is an Italian family-owned multinational company with a portfolio of more than 60 quality brands, distributed in over 150 countries around the world. The group operates across several sectors, including food, home care, adhesive, personal care and beauty products. At Bolton, entrepreneurship, responsibility and a long-term vision are key. The company combines the strength and stability of an international group with the agility and spirit of a family business. This creates an environment where collaboration, ownership and sustainable growth are strongly valued. About Repair Care Repair Care is part of Bolton Adhesives and is specialised in sustainable repair and maintenance solutions, with a strong focus on preserving and restoring timber. The company supports professional users with innovative systems, technical expertise and training, helping customers extend the life of buildings and components in a smarter and more sustainable way. Working at Repair Care means being part of an organisation where technical knowledge, practical support and customer focus come together. You will join an ambitious and internationally connected environment in which collaboration, expertise and long-term value creation are central. #LI-RD1

We are currently looking for a talented Senior C++ Developer. In this role, you will interact closely with various departments across our organisation, including the product engineering and customer support teams. As a senior figure, you will also have the opportunity to coach team members and take a leading role in critical software development projects. Key focuses will be contributing to the future technical direction of our main product, gaining deep expertise in our domain whilst promoting modern development practices. Role Responsibilities: • Hands-on C++ software development contributing to the design, maintenance and advancement of complex software, • Stay abreast of the latest developments in C++ and related technologies, contributing to a progressive developer experience, • Mentor and coach junior team members, • Conduct code reviews, embedding quality and promoting best practices, • Collaborate closely with other teams to ensure smooth delivery and knowledge distribution, • Promote a balance between business value, technological improvements, and near-term goals Key Skills: • Expert-level C++ with significant commercial experience, • Strong knowledge of modern features and best practices, • In-depth knowledge of architecture, design, maintainability, scalability and performance, • Excellent collaboration and communication skills, • Industry experience with multi-threading and complex memory management, • Keen interest in continuous improvement and personal development, • Experience with CI/CD pipelines, • Adept in managing legacy code bases, • Experience with higher level languages - specifically Python and C# would be beneficial, • Comfortable working across technology domains and software stacks, • Strong knowledge of Linux and Windows Operating Systems, • Awareness of containerisation and orchestration technologies, • Familiarity with scripting languages, • Experience in collaborative and iterative development approaches, • Bachelor's or Master's degree in Computer Science, Software Engineering, or a related field is required We encourage you to apply even if your experience is not a 100% match with the position. We are looking for someone with relevant skills and experience, not a checklist that exactly matches the job description. We want to help you grow, and in return, you help us grow into a stronger, more inclusive organisation. About Us: We didn’t start out as a traditional security product. In the beginning, Glasswall was one of only two file sanitisation filters in the US Intelligence Community’s highly classified networks. We are rated #1 by the National Security Agency. We designed Glasswall CDR to protect businesses against the most advanced file-based threats. Today, we’re trusted by commercial and government organisations around the world. Inclusion: At Glasswall we believe that diversity of people and thought are central to our purpose. We are committed to making Glasswall a company that is attractive to people of many different backgrounds. This includes diversity in every sense of the word: those with different backgrounds, ages, ethnicities, gender identities, sexual orientations, ways of thinking and those with disabilities or neurodivergent conditions. We therefore welcome and encourage applications from everyone, including those from groups that are under-represented in our workforce. One of our corporate objectives is to ensure that the organisational health of the firm is highly rated by our employees. We believe that this is only possible if we promote a culture of inclusion and respect across out business. Each quarter we survey employees on a range of questions relating to our organisational health. This holds a mirror-up to a business and ensures that we can focus on where we need to do better. We have an Organisational Health Committee, which is chaired by a non-executive position. The panel has been formed to guide the leadership in taking positive action that supports a good work-life balance, family friendly relations and to be inviting to a diverse range of potential employees. We also have a Women in Technology Group which has been formed to promote balance in the way that we communicate with, promote, encourage, and support people across our business. Work/Life Balance: Our team puts a high value on work-live balance. It isn’t about how many hours you spend at home or at work; it’s about the flow you establish that brings energy to both parts of your life. We believe striking the right balance between your personal and professional life is critical to life-long happiness and fulfilment. We offer flexibility in working hours and encourage you to find your own balance between your work and personal lives. Salary and Benefits: • Glasswall offers a competitive salary and incentives package., • We offer flexible and remote working options, with hybrid working from our Central London office., • Office travel and incidental WFH expense coverage., • 25 days holiday (plus public holidays)., • Private Medical Insurance including mental health support and cancer care., • Enhanced sick pay., • Annual investment in training and professional development., • Company sponsored life, critical illness, and income protection insurance., • Contributory pension scheme., • Access to ‘salary sacrifice’ benefits such as Cycle to Work and Tech Schemes. A successful candidate will live in the United Kingdom and is comfortable working from home with some meetings being held in the London office. Glasswall is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected status. Application process: Interested candidates can email jandersen@glasswall.com or visit http://careers.glasswall.com/ to apply.

C++ Developer Contract - 6 months, start ASAP, annual salary pro-rata Location - remote with travel to Reading area office on day 1 Why - Private Equity Investment + Growth Tech - C++ Qt • Do you have 5+ years' experience of C++ development?, • Do you have working knowledge of Qt? We are working with a growing software vendor who have recently received private equity investment and have exciting plans to grow and product new software. They produce forward thinking financial services software used by thousands of customers in the UK. As a C++ Developer you will utilise your knowledge of programming to help create and maintain their suite of software solutions. You'll contribute to the collaborative development culture with code reviews and mentoring of others. C++ Developer - Responsibilities • Develop new software for the products and services, • To assist the design, and maintenance of new and existing products, • Contribute via the team with the delivery of high-level system designs, • Collaborate across multiple technical teams, • Perform code reviews for other team members, • Contribute to an agile team via refinement meetings, stand-ups and sprint reviews C++ Developer - Requirements • 5+ years' commercial development experience using C++, • Working knowledge of Qt, multiplatform, • Knowledge of XML / JSON / RESTfulAPI's, • Experience working on Linux and Windows based systems, • SQL Based database platforms, • Experience of code versioning tools (GIT / SVN) and Atlassian tool suite (JIRA, Confluence), • Strong written and verbal English language skills, • Excellent communication and collaboration skills For more information please contact Katie at Matched. Senior C++ Developer / Senior C++ Engineer / C++ Developer / C++ Engineer / C++

C++ Engineer Contract - 6 months, start ASAP, annual salary pro-rata Location - remote with travel to Reading area office on day 1 Why - Private Equity Investment + Growth Tech - C++ Qt • Do you have 5+ years' experience of C++ development?, • Do you have working knowledge of Qt? We are working with a growing software vendor who have recently received private equity investment and have exciting plans to grow and product new software. They produce forward thinking financial services software used by thousands of customers in the UK. As a C++ Engineer you will utilise your knowledge of programming to help create and maintain their suite of software solutions. You'll contribute to the collaborative development culture with code reviews and mentoring of others. C++ Engineer - Responsibilities • Develop new software for the products and services, • To assist the design, and maintenance of new and existing products, • Contribute via the team with the delivery of high-level system designs, • Collaborate across multiple technical teams, • Perform code reviews for other team members, • Contribute to an agile team via refinement meetings, stand-ups and sprint reviews C++ Engineer - Requirements • 5+ years' commercial development experience using C++, • Working knowledge of Qt, multiplatform, • Knowledge of XML / JSON / RESTfulAPI's, • Experience working on Linux and Windows based systems, • SQL Based database platforms, • Experience of code versioning tools (GIT / SVN) and Atlassian tool suite (JIRA, Confluence), • Strong written and verbal English language skills, • Excellent communication and collaboration skills For more information please contact Katie at Matched. Senior C++ Developer / Senior C++ Engineer / C++ Developer / C++ Engineer / C++

Are you currently working for a Motor Factor, tooling supplier, or distributor of automotive products? Looking to take the next step into a field-based B2B or B2B2C sales role with more autonomy and a defined territory? Our client, a premium global manufacturer within the automotive aftermarket, is expanding their UK sales team. They are seeking an experienced Area Sales Manager to manage and grow distributor accounts across the South East of England. This is a fantastic opportunity for someone with a strong understanding of automotive distribution channels and a passion for growing trusted B2B relationships. Key Responsibilities: • Develop and deliver a sales plan that grows distributor sales across the region., • Manage existing Motor Factor and tooling distributor accounts, while actively developing new relationships., • Sell a high-quality range of automotive repair and maintenance products into distributor and trade environments., • Conduct regular site visits, supporting stockists with training, promotional activity, and product launches., • Support distributors in selling into their customer base (B2B2C), offering product knowledge and marketing support., • Ensure accurate product listings, pricing, and system accuracy across distributor networks., • Provide competitor feedback and market insights to support wider commercial strategy., • Maintain an up-to-date CRM system and deliver weekly/monthly reports to the National Sales Manager. Skills & Experience: • Experience working for a Motor Factor, tool supplier, or automotive equipment distributor., • Previous success in a sales role – whether field-based or internal – within the automotive aftermarket., • Confident managing a portfolio of B2B distributor accounts, with an eye for upselling and adding value., • Excellent interpersonal skills and ability to build rapport with branch staff, trade counter teams, and purchasing decision-makers., • Comfortable travelling across the South East and managing your own diary., • A proactive, target-driven sales approach with a genuine passion for the automotive industry. Additional Information: • Company vehicle provided., • £5 daily lunch voucher., • 25 days holiday + bank holidays., • Full product training and support from the wider sales and marketing team. To express interest in this promising role, kindly forward your latest CV, detailing your present or most recent remuneration package and any notice period you might have. For a discreet, detailed discussion about the role, you can reach out to Daniel Marlow at . Alternatively, connect with us on LinkedIn via the following link: https://in/danielmarlowrecruitment/

About Viator Viator, a Tripadvisor company, is the leading marketplace for travel experiences. We believe that making memories is what travel is all about. And with 300,000+ travel experiences to explore—everything from simple tours to extreme adventures (and all the niche, interesting stuff in between)—making memories that will last a lifetime has never been easier. With industry-leading flexibility and last-minute availability, it's never too late to make any day extraordinary. Viator. One app, 300,000+ travel experiences you’ll remember. The Viator Traveller Engineering team is distributed across Europe and is responsible for viator.com, the Viator mobile apps and all their supporting infrastructure. We’re looking for a Senior Software Engineer with iOS development experience to join our Viator team. This role is open to candidates based within a commutable distance (generally within 2–3 hours) of one of our office hubs in Oxford and London in the UK. We embrace flexibility in where and how work gets done and also value meaningful in-person moments to connect and collaborate. You can expect a remote-first working model with periodic in-person gatherings at your closest office for team connection, planning, or other key moments. Within Viator we have a fun and friendly environment where the key objective is getting things done. Our engineers take part in the full process from design, to code, to test, to deployment and back again for further iteration. Our tech stack includes Swift, SwiftUI, Combine and GraphQL in a modular layout that follows SOLID principles using Clean Architecture with MVVM-C. Would you like to build features end to end? Would you enjoy working with a large number of technologies? Do you like moving quickly, releasing features daily, working with other smart and talented engineers? If this sounds like you, we’d love to talk to you. What you will do • Code! Our engineers focus on doing what they enjoy most and do best, writing code, • Touch code at every level – while the focus is app development, you’ll also have opportunities to work on backend microservices, • Collaborate closely with Product and design teams to define feature specifications and develop high quality deliverables for our customers, • Take responsibility for all aspects of software engineering, from design to implementation, development experience, QA and maintenance, • Work alongside other engineering groups located around the world What we’re looking for • Experience of developing an iOS app and familiarity with mobile web and back-end technologies would be beneficial, • At least 5 years’ experience of commercial software development, ideally working with a rich user interface, • Experience with reactive programming in native mobile platforms, • Willingness and ability to take on new technologies, • Ability to break down complex problems into simple solutions, • High quality verbal and written communication skills, • Sense of ownership and pride in your work Perks of Working at Viator • Competitive compensation packages, including base salary, annual bonus, and equity., • “Work your way” with flexibility to suit your lifestyle. We take a remote-friendly approach to collaboration, with the option to join on-site as often as you’d like in select locations., • Flexible schedule. Work-life balance is ingrained in our culture by design. Trust and accountability make it work., • Donation matching. Give back? Give more! We match qualifying charitable donations annually., • Tuition assistance. Want to level up your career? We love to hear it! Receive annual support for qualified programs., • Lifestyle benefit. An annual benefit to spend on yourself. Use it on travel, wellness, or whatever suits you., • Travel perks. We believe that travel is employee development, so we provide discounts and more., • Employee assistance program. We’re here for you with resources and programs to help you through life’s challenges., • Health benefits. We offer great coverage and competitive premiums. Our Values We aspire to lead; We’re relentlessly curious;... want to know more? Read up on our values: • We aspire to lead. Tap into your talent, ambition, and knowledge to bring us – and you – to new heights., • We’re relentlessly curious. We push beyond the usual, the known, the “that’s just how it’s done.”, • We’re better together. We learn from, accept, respect, support, and value one another– and are creating something remarkable in the process., • We serve our customers, always. We listen, question, respond, and strive for wow moments., • We strive for better, not perfect. We won’t get it right the first time – or every time. We’ll provide a safe environment in which to make mistakes, iterate, improve, and grow., • Our workplace is for everyone, as is our people powered platform. At Tripadvisor, we want you to bring your unique identities, abilities, and experiences, so we can collectively revolutionize travel and together find the good out there. #LI-TA1 #Viator #LI-Hybrid

We are a leading automotive PR agency based in Buckingham, representing some of the most prestigious and innovative brands in the automotive world. Our work is fast-paced, high-profile, and results-driven. We build the systems that drive our clients and their reputation. We are looking for a hard working mid-level Full Stack Developer to join our team. You will be the technical anchor for our digital products, taking ownership of maintaining and enhancing our pre-existing web applications. This is a hands-on role perfect for a developer who enjoys stability, evolving their skillset and building out products. You won't just be churning out code; you will be maintaining critical systems that power our clients operations. You will work closely with our creative and PR teams to ensure our digital tools are functional, robust, secure, and user-friendly. • Maintenance & Optimisation: Take ownership of existing PHP/Laravel projects, performing regular updates, bug fixes, and performance improvements., • Feature Development: Build new features and modules to support growing client needs, specifically utilising FilamentPHP for admin panels and internal tools., • Full Stack Execution: Work across the entire stack, from database management (MySQL) to front-end UI updates (HTML, CSS, JS)., • Quality Assurance: Troubleshoot issues reported by the team or clients and implement long-term tests and fixes., • Collaboration: Communicate technical concepts clearly to non-technical stakeholders (PR managers, creatives) and work as a reliable team player., • PHP & Laravel: Strong commercial experience with modern PHP (8.x) and the Laravel framework., • Front-End: Proficiency in HTML5, CSS3, and vanilla JavaScript., • Database Management: Experience designing and optimising MySQL databases., • Version Control: Comfortable using Git for version control., • Attitude: A hard worker with a "can-do" mindset who focuses on finding solutions, not just identifying problems., • FilamentPHP: Experience building admin panels or tools using Filament is highly preferred., • The TALL Stack: Experience with TailwindCSS, Alpine.js, and Livewire would be a significant advantage., • Server Management: Basic knowledge of Linux server administration or deployment processes (e.g., GitHub CI/CD processes)., • Team Player: You thrive in a collaborative environment and are happy to support colleagues., • Hard Working: You take pride in your work and are willing to go the extra mile to ensure a project is delivered to a high standard., • Communicates well: You’re able to communicate efficiently with your colleagues and clients and interpret client requirements into an effective task list. Automotive Interest: You don't need to be a "petrolhead," but an appreciation for the automotive industry is a bonus! • Competitive Salary DOE, • Hybrid Working: We offer a balance of three days in our Buckingham office and two days working from home., • Health: Private Health Care scheme. Holiday: 20 days annual leave + Bank Holidays.

Freelance Handyman / Caretaker Required High Town, Luton Location: High Town, Luton / LU1 / LU2 Role Type: Freelance / Flexible / Ongoing Planned Works Rate: £20 per hour Reactive Call-Out: £40 including the first hour Additional Reactive Hours: £20 per hour Emergency / Out-of-Hours: To be agreed before attendance We are looking for a reliable, experienced and trustworthy freelance handyman/caretaker to help maintain our serviced accommodation and rental properties in High Town, Luton. The properties include serviced accommodation units, rental properties and commercial units, so we need someone practical, flexible and comfortable dealing with both planned maintenance and reactive issues. This would suit someone local to LU1/LU2 who is looking for consistent ongoing work and can attend quickly when neede...

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a Senior Systems Engineer (Electronics) you will draw on your diverse engineering background and the product lifecycle awareness to work on a variety of research activities in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your proactive nature will enable you to understand and adapt to new technology areas quickly. The Luton team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems and specialist structures for both civil and defence applications. The areas of activity cover but is not limited to: Electro-thermal systems and Electro-mechanical systems, Specialist materials and coating systems, Embedded and structural composites, Aircraft transparencies, Icing modelling and analysis, Sensing and data acquisition, Electrical and software control systems and digital engineering / manufacturing. This role is to provide analysis and design data to support ice protection system design through modelling and simulation of in-flight icing behaviour of aircraft surfaces, or representative surfaces. It is further expected that the role holder develop an in-depth understanding of the icing wind tunnel facility capabilities, and provide consultation and support to customers and other third party users ensuring testing is conducted in line with relevant standards and specifications and contributing to test reports as required. This expertise is to be developed through understanding icing physics and aircraft ice protection philosophies (particularly electrothermal), and through practical experimentation and modelling verification using the research icing wind tunnel.The successful candidate should have a broad engineering knowledge base but have a desire to specialise and in time develop the in depth knowledge to become a subject matter expert in icing analysis and testing, being able to support next generation ice protection system designs. We are seeking someone adaptable in their approach to work, and be willing to understudy other team members in their areas of expertise to ensure project objectives are met. As a Senior Systems Engineer (Electronics), you will be naturally curious and seek to increase/deepen your own technical knowledge through study, collaborative working, hypothesis testing and experimentation. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. The role requires flexibility for occassional national travel to meet with customer and we offer the opportunity to work from home up to two days per week dependent on business need. Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied. You may have budget accountability for a Work Stream or Work Package Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives. Support or lead the design of external work packages to be carried out by third parties in order to meet project research objectives. Responsible for accurately capturing and recording data and results from test work and development trials. Responsible for raising and issuing high quality and detailed technical documentation. Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s) Responsible for preparation of Technology Development Plans and Technology Business Cases within your project(s) Ensure all planning documentation in your responsibility is regularly updated, accurate, and delivery is on track. You may also have schedule accountability for your project(s) Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead. Drive project(s) toward exploitation, identifying and supporting industrialisation scenario development. Support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases. Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: HNC, degree or equivalent experience in electrical or systems engineering Experience delivering designs for electro-mechanical, sensing OR controller systems within an engineering environment Electronics pcb design experience Good general engineering/technology knowledge base and can demonstrate strategic thinking. Working knowledge of aerodynamics and an appreciation of physics based modelling approaches for thermodynamic analysis. Experience of test/experimental design, and practical execution in laboratory or test facility conditions to defined standards, and be able to contribute to the development of new test methods. Strong self-starter, able to execute tasks according to plan. Logical and methodical approach to task planning. Experience managing deployed resources (people you lead but you are not their line manager). Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings. Desirable: A higher degree qualification such as a Masters, PhD or EngD General awareness of budget and schedule management. An awareness of aerospace certification requirements. Experience of the Systems Development Lifecycle process You will be developing your own network and you will have a general awareness of key companies and key individuals who operate in the wider aerospace technology and engineering field We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary GKN Aerospace is an original aerospace innovator. Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. We are seeking a Senior Engineer with a strong Systems Engineering background to join our Luton manufacturing team and contribute to the future of aviation. The Senior Systems Engineer is responsible for developing, integrating, implementing, and verifying technical solutions and associated compliance documentation, ensuring alignment with all applicable customer, regulatory, and airworthiness requirements, while meeting agreed programme, schedule, and manufacturing constraints. This is a very exciting and potentially career defining opportunity. You will be a leading member of the team embarking on a significant and challenging technology development project, where we are developing new Ice Detection Systems for aerospace applications. Our core working hours at the Luton site are 07:3016:30, Monday to Thursday, and 07:3012:30 on Fridays. The role includes occasional national travel to support customer and supplier visits, as well as visits to our Global Technology Centre in Bristol. We also offer a hybrid working arrangement, with the opportunity to work from home for up to two days per week, depending on business needs. Job Responsibilities Quality assurance reviewer of design deliverables created by the GKN Defence - Systems Engineering team Data analysis and reporting into qualification arguments and submissions for GKN Defence avionic, control systems and sub-systems Release of stakeholder and internal technical communications Technical work breakdown of program planning objectives Assure best practice development within systems engineering excellence Mentor and develop systems engineering team members System engineering inputs to technology incubator process Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: HNC, degree or equivalent experience in electrical or systems engineering Significant experience delivering designs for electro-mechanical, sensing OR controller systems within an engineering environment Electronics pcb design experience Proven design and delivery of high quality and reliable systems in a complex regulatory environment (e.g. MIL-STD, TUV cert, etc) Proven track record (minimum 1 project), in compliance planning and verification & validation analysis for product release Advanced experience of the Systems Development Lifecycle process Intermediate experience of requirement decomposition and tools (e.g. DOORS) Intermediate experience defining system / modular architecture Advanced experience developing system control functions & logic models Ability to design and set-up experiments and fixtures for testing CATIA V5 interrogator (minimum) Proficiency in Microsoft Office Applications. Essential General Experience: Technical leadership - Ability to mentor develop functional team members Confident presenting technical information to a wider audience including senior stakeholders and internal customers Live the culture of Plan-Do-Check-Act and continuous improvement Hands-on approach Have a real desire to be up close to the components and people that build our systems. Desirable: Working experience delivering system designs using MBSE toolbox (e.g. SysML) Experience in safety assessment software/toolbox FTA and FMEA (e.g. ANSYS Medini, Isograph) Proficiency in multi-domain modelling/simulation packages (e.g. MATLAB, Simulink, Simscape, Amesim) We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings, and specialist structures for both civil and defence applications. We are looking for a Senior Design Engineer to join our Transparencies team to support new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows. This is more than a CAD role, as a Senior Design Engineer you will represent design in an integrated product team, and lead design activities/projects to support your product group including the creation and maintenance of product definition and ensuring ongoing product performance against requirements. Working across the product lifecycle you will be involved in: New product development activities including requirements management, geometric design, materials selection, tooling, manufacturing process development and assembly methods, specifications, product verification, qualification and certification testing. Product sustaining activities including MRB, Customer concession management, manufacturing problem solving, Engineering change management and in service technical support to our customers as a part of an Integrated Programme Team. Continuous improvement of products, processes, tools and design handbooks to ensure the highest standards of quality and compliance to evolving customer, regulatory, and airworthiness requirements. As a Senior Design Engineer within the Engineering and Technology Department you will also have the opportunity to contribute to high-impact research and development projects within your field of expertise. You will have a track record of delivering high quality technical work, and have project management skills. You will have good written and oral communication skills, and be confident working with a broad range of internal and external stakeholders, including non-technical colleagues. Core operational hours at our Luton site are Monday to Thursday, 07:3016:30, and Friday, 07:3012:30. Some flexibility may be available, subject to agreement with manager. There may also be an opportunity to work from home one day per week, depending on business needs. Occasional UK travel may be required to meet suppliers, customers, and visit other GKN Aerospace sites. Job Responsibilities Analyse customer requirements and define technical solutions as input to bids and proposals within assigned programmes/ projects. Develop, check and approve technical solutions and compliance documentation for work packages to ensure they are compliant with all relevant customer, regulatory, and airworthiness requirements, within agreed programme, schedule, and manufacturing constraints. Identify and assess technical risks and propose mitigations relevant to the work package within assigned programmes/projects. Act as Lead Design Engineer in Integrated Program Teams (IPT) and Material Review Board (MRB) Define and validate test methods and/or alternate means of compliance (analysis/similarity) as required to demonstrate design solution complies with requirements. Create, check and approve documents such as permits, concessions, rework schemes and provide technical support by implementing solutions to address non-conforming products, designs, and compliance documentation. Lead design activities for internal and external technical reviews including formal gate reviews by creation and preparation of technical data and presentations of product design. You will be responsible for raising and issuing high quality and detailed technical documentation. Mentor, train and develop junior members of the team by providing technical guidance and support. You will contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. You should have a good understanding of the product development lifecycle, design practices and an interest in manufacturing. This is a hands on role, and although product oriented the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You should be adaptable in approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met. As a Senior Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development. Profile description: To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Hold an accredited relevant Engineering qualification at Bachelor level or equivalent. Naturally curious, and show a strong interest in aviation and aerospace engineering technology. Strong self-starter, able to execute tasks according to plan. Logical and methodical approach to task planning and be able to demonstrate an evidence-based approach to decision making and problem solving. Good interpersonal and communication skills, Able to work independently and as part of a multi-disciplinary team to meet objectives. Possess good oral and written communication skills, able to create clear, concise and accurate technical content. Experience of creating models and drawings using CATIA V5. Please note: Some GKN Aerospace programmes are subject to regulatory restrictions which may impact certain Nationalities, as such part of the application process you are asked to declare. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Assistant Quantity Surveyor - Social Housing - Reactive Maintenance Full-Time, Permanent Opportunity Salary: £35k - £40k plus package Based in Dunstable We are working with a leading Construction Contractor to find a successful and proactive Assistant Quantity Surveyor to join their team in Dunstable. We are looking for an individual to work on reactive maintenance, voids and disrepair projects assessing repairs needed in occupied and empty homes within the Social Housing sector. About You We are looking for the successful candidate to have previous experience of commercial activity on a repairs & maintenance contracts. Social housing experience is ideal Ideally experience working on reactive maintenance/voids contracts Experience with managing subcontractors / subcontractor payments Thorough and meticulous person with an eye for detail The ability to work to tight deadlines and maintain a flexible attitude to work task and workload Ability to work on own initiative Experience working with NHF Schedule of Rates. Salary & Benefits You will be working for a modern, forward thinking business; that believe the strengths, skills and personalities of their people are the key to the group's success. This is full time, permanent role for which you will receive a highly competitive salary. Please apply via the link, or call Mia on 07538 237552 for further information. TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. Were recruiting a Quality Compliance Engineer to join our Quality Engineering team at our Luton manufacturing site, reporting directly to the Site Quality Manager. Working within a fast-paced aerospace manufacturing environment, you'll keep our Quality Management Systems (QMS) aligned to AS9100 and customer requirements, lead internal audits across the site, and help embed a culture where quality is owned by everyone. You'll have real visibility within the business, contributing to our daily Tier management structure and working closely with department heads and the site leadership team. Our Luton site operates core hours of 07:3016:30, Monday to Thursday, and 07:3012:30 on Fridays, giving you an early finish to start your weekend. Job Responsibilities Maintain the site Quality Management System (QMS), keeping documentation, processes and procedures current and audit-ready. Plan, schedule and lead the internal audit programme, reporting findings and driving timely closure of corrective actions. Support external certification and customer audits, acting as a key point of contact for AS9100 and regulatory compliance. Champion root cause analysis and effective corrective/preventive action (8D, RCCA) across the site. Analyse quality data and trends, and support continuous improvement and cost of poor quality (COPQ) reduction. Profile description: To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Experience in a quality systems, compliance or audit role within a regulated manufacturing environment (aerospace, defence, automotive or similar). Working knowledge of AS9100 / ISO 9001 and internal auditing principles. Strong analytical, problem-solving and stakeholder-management skills. Desirable: HNC/HND qualification (or equivalent experience) in an engineering discipline, preferably Mechanical, Electrical, Industrial engineering. A qualified internal auditor (or willingness to train); aerospace experience is a distinct advantage. We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Quality Compliance Engineer will demonstrate strong communication skills, using active listening, thoughtful inquiry, and clear articulation when engaging with diverse stakeholders. You'll build effective professional relationships across the business, supporting collaboration and shared understanding. With excellent analytical and critical-thinking abilities, you'll apply close attention to detail when working within complex systems, ensuring accuracy in identifying non-conformities and improvement opportunities. Confidently carry out critical evaluations of processes and designs, assessing effectiveness and highlighting areas for enhancement. Strong problem-solving skills and solid subject knowledge of requirements will support sound judgement and practical recommendations. The role requires effective note-taking, ensuring audit evidence and observations are captured accurately and transparently. The Quality Compliance Engineer will act with the highest level of integrity, maintaining impartiality, confidentiality, and professionalism at all times. With a mindset of adaptability and curiosity, remain open to new information, evolving requirements, and continuous improvementboth in own work and across the wider organisation. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? TPBN1_UKTJ

The Company: A UK based FM company who deliver 24/7/365 maintenance throughout the UK supported by our regional office network. We deliver engineering excellence across a wide range of buildings – from hospitality venues, grocers, health care, educational establishments, Government buildings and commercial properties. The Role: As a mobile maintenance engineer you will be responsible for the planned and reactive maintenance of electrical building services across various commercial buildings in Bedfordshire and Hertfordshire. You will be predominantly working on electrical services although you will still be required to carry out general PPM's. The person: It is essential that you have experience of working in a client facing maintenance role and that you are a fully-qualified electrician. Salary: Up to £45k- £50k depending on experience, 30 minutes travel each way unpaid, but then any travel after that is paid, private use of van, 21 Days holiday plus Bank holidays, 3%/5% pension. Call out rota is 1 in 8 - Standby allowance is £150 40 hour week OT rates of x1.5 and x2

Repairs & Maintenance Project Officer (Compliance & Assurance) We are seeking an experienced Repairs & Maintenance Project Officer to support critical compliance and assurance work across our Building Technical Services (BTS), Luton Council. This is an brilliant opportunity for a skilled contractor to play a key role in strengthening compliance, improving evidence management, and ensuring regulatory readiness within a local authority environment. Key Responsibilities Lead on collating, reviewing, and populating all required evidence for the Local Authority Information Return (LAIR) across BTS compliance areas Support the development of the Contextual Statement, working closely with senior stakeholders Contribute to the production of Spotlight Reports and Position Statements across all compliance areas Identify gaps in existing evidence and implement robust systems and processes to ensure ongoing compliance and future-proof data capture Produce or coordinate the production of any missing evidence required for audits, inspections, or regulatory returns Work collaboratively across multiple teams to ensure consistency, quality, and accuracy of compliance documentationAbout You Proven experience in a repairs & maintenance, compliance, or asset management environment, ideally within a local authority or housing setting Strong understanding of regulatory complicated processes, or statutory returns Ability to quickly assess gaps and implement practical, sustainable solutions Excellent organisational and analytical skills, with a high level of attention to detail Confident engaging with stakeholders and coordinating inputs across teams Self-starter with the ability to operate independently in a fast-paced environmentWhy Apply? Competitive £450 per day rate Opportunity to deliver impactful compliance and assurance improvements Work within a collaborative and supportive environment Play a key role in preparing the organisation for audits and inspections Connect2Luton is a trading style of Luton & Kent Commercial Services LLP - A joint venture between Luton Borough Council & Commercial Services Kent Ltd. Connect2Luton is an equal opportunities Employment Agency & Business. It positively encourages applications from all suitably qualified and eligible candidates

A Licensed Engineer Location: Luton Employment Type: Permanent Shift Pattern: 5-5-4 days and nights Hours: 12-hour shifts Line Up Aviation is working with a leading aviation client who is looking to appoint an A Licensed Engineer to join their maintenance operation at London Luton Airport. This is a permanent opportunity working a 5-5-4 shift pattern covering days and nights. The successful candidate must hold a UK CAA Category A Licence and have hands-on maintenance experience working on Airbus A320 aircraft. Responsibilities Carry out aircraft maintenance in accordance with approved data, company procedures and regulatory requirements. Certify maintenance tasks within the scope of your licence and company authorisations. Carry out scheduled and unscheduled maintenance, inspections, defect rectification and component replacements. Assist with diagnosing and troubleshooting aircraft defects. Ensure all maintenance documentation is completed accurately and in a timely manner. Maintain compliance with UK CAA regulations, company procedures and safety standards. Work closely with B1/B2 Licensed Engineers, mechanics and wider maintenance teams. Promote a strong safety culture and support continuous improvement across the operation. Essential Requirements UK CAA Part-66 Category A Licence. Hands-on experience working on Airbus A320 aircraft. Base and/or line maintenance experience on commercial aircraft. Recognised apprenticeship, diploma or equivalent aircraft maintenance qualification. Valid right to work in the UK. Willingness to work a 5-5-4 shift pattern covering days and nights. Desirable A320 type rating. Current or recent company approvals/authorisations on A320 aircraft. Previous line maintenance experience. Additional Information Permanent position. Based at London Luton Airport. 5-5-4 shift pattern covering days and nights. 12-hour shifts. Competitive salary and benefits package

Commercial Gas Engineer Location: Bedfordshire, Hertfordshire & Buckinghamshire Salary: Up to £55,000 + Company Van + Fuel Card Hours: Monday to Friday, 7:30 AM – 4:30 PM Job Type: Full Time | Permanent We are currently recruiting for an experienced Commercial Gas Engineer to join a well-established building services contractor working across a varied portfolio of commercial contracts throughout Bedfordshire, Hertfordshire and Buckinghamshire. This is a fantastic opportunity to join a growing business offering a stable, permanent position with a local patch, excellent work-life balance and long-term career progression. The Role As a Commercial Gas Engineer, you'll be responsible for carrying out planned preventative maintenance (PPM), reactive repairs and fault finding across a wide range of commercial properties. You'll work across a mixed portfolio including offices, schools, healthcare facilities, retail, industrial and other commercial buildings, ensuring gas and heating systems are maintained to the highest standards. Key Responsibilities • Carry out servicing, maintenance and repairs on commercial gas appliances and heating systems., • Diagnose and repair faults on boilers, burners and associated plant., • Complete planned preventative maintenance (PPM) visits., • Respond to reactive breakdowns and emergency call-outs when required., • Work on pumps, pressurisation units, expansion vessels, pipework and heating controls., • Complete all service reports and compliance paperwork accurately., • Ensure all work is carried out safely and in line with current Gas Safe regulations., • Provide excellent customer service while representing the business on client sites. Requirements • Valid Commercial Gas ACS qualifications (COCN1 or CODNCO1)., • Commercial gas maintenance and breakdown experience., • Strong fault-finding skills., • Experience working within commercial building services., • Full UK Driving Licence., • Good communication and customer-facing skills. What's on Offer • Up to £55,000 basic salary., • Company van and fuel card., • Monday to Friday working hours (7:30 AM – 4:30 PM)., • Permanent, full-time position., • Mixed commercial contract portfolio., • Local coverage across Bedfordshire, Hertfordshire and Buckinghamshire., • Stable, well-established employer., • Ongoing training and career progression opportunities

Job Title: Commercial Gas Engineer (HVAC) Location: Luton / Stevenage / Bishops Stortford Contract Type: Permanent Working Hours: 45 Hours Per Week Salary: £48,656.73 Total Salary (Inclusive of Standby Payment), Overtime, Travel Time, 33 Days Holiday, Private Pension & Benefits - Including Private Health Care, Life Insurance, Employee Discounts An exciting opportunity has emerged for a skilled Commercial Gas Engineer (HVAC) to join our company to work with one of our major UK supermarket clients. The role will involve carrying out planned and reactive maintenance across several retail stores, maintaining, and repairing a range of commercial heating systems and air conditioning units. Additionally, you will undertake regular planned store visits to complete reactive work, PPMs and minor repairs as requested by the customer. Key Responsibilities: • Carrying out PPM and reactive maintenance across a number of sites., • Service and repair a range of mechanical equipment, e.g. boilers, fans, pumps, AHU's, FCU's., • Carry out minor alterations and installations within the individual’s technical competence in accordance with current specifications., • Order spares to the laid-down procedures., • Identify non-repairable faults in plant and machinery and promptly advise the HVAC supervisor of findings, with recommendations regarding suitable replacement. Qualifications / Experience: Essential • SVQ/NVQ Level 3 within Heating/Ventilation/Mechanical / HVAC or Equivalent Qualification., • ACS Commercial Gas Qualifications COCN, CIGA, CORT, ICPN, CDGA, TPCP1/1A as a minimum. Desirable but not essential: • ACS Domestic Gas Qualifications CCN, CENWAT, CPA as a minimum., • City and Guilds 2079-1 FGas Category 1., • City and Guilds 7671 18th Edition. The ideal candidate: • Flexible to be part of the 24/7 on-call rota every 1:4 weeks., • Full driving license., • Experience using a PDA system., • Have the ability to work at heights, work in confined spaces., • Carried out PPM and reactive maintenance within a similar retail environment

Connect2Luton are excited to recruit a Service Desk Analyst on behalf of Luton Borough Council. Main purpose of position: On an operational level the role will respond to Incidents and Service Requests (including Major Incidents). They will contribute to the resolution of Incidents and Service Requests problems identified and building solutions for the knowledge base. Within the day-to-day service the role will contribute to the delivery of continuous improvement of the process and supporting systems into the Authority. The post holder will be part of a team and will be assisting the Service Desk Lead and Service Delivery in the control and success of the Service Desk function that handles customers' issues or requests with professional attitude. Responsible for the triage and actions on both Incidents and Service Requests received by the Service. The post can greatly influence the direction and success of general day to day operation of the Service. The role will be a system administrator for the Councils corporate IT Service Management tool and assisting with the maintenance of access control of circa 3500 user accounts across the Council's 150+ sites which include libraries, schools, community centres, social services establishments as well as the Council's main central offices. You will be responsible to: Create and perform triage actions to all support calls and tickets from the user community into the IT Service Management tool. Ensuring accurate and necessary information is obtained and appropriate categorisation for incidents and requests is applied and promptly allocates ticket. investigate first stage diagnostic on all tickets, acting on own initiative, within stated guidelines and in conjunction with other members of the team. Apply skills to resolve all assigned incidents before referring to application and/or technical support. Administration of categorised Service Requests (e.g. New Starter, Leaver and transfers) relating to access to Luton's Windows Active Directory structure, primary email systems, ensuring that a full audit trail of changes are maintained within Active Directory and the IT Service Management tools. Follows up reported complex incidents to ensure timely resolution or escalation, and promptly communicate on progress to end-user, requests are fulfilled, and the customer communication is complete. Ensure that incidents and requests are handled in accordance to agreed SLAs. Develop and maintain a comprehensive knowledge base, including technical articles and self-help guides for end-users.Skills and Experience: Demonstrable experience of providing IT Customer support Demonstrable experience working in a busy IT service desk environment; using an ITSM tool to create, update and manage tickets with precision and attention to detail Some experience technical knowledge of enterprise level computing, mobile devices, supported Microsoft operating systems, business software and office productivity tools Able to manage Windows Active Directory and Microsoft exchange (both On-premises and Azure/Exchange, Office 365 solutions) Able to administer Windows AD file system security settings Able to maintain accurate hardcopy and computerised records Able to use Microsoft Office or equivalent applications competently Demonstrable understanding and operational knowledge of ITSM frameworks e.g. ITIL v3 or 4 Demonstrable experiences of ITSM tooling administration Working hours will be on a rota basis between 7am and 7pm Monday to FridayAbout Us Luton Borough Council have partnered with Kent County Council to create Connect2Luton, a recruitment managed service for all contingent temporary agency, contract, and interim roles at the Council. Our heritage and being local government owned which means we have a wealth of knowledge and expertise within the public sector, with many of our employees having previously worked for the Council or have supplied previously into the Council, for several years. We are an equal opportunities employment agency and business that positively encourages applications from all suitably qualified and eligible candidates. Connect2Luton is a trading style of Luton & Kent Commercial Services LLP - A joint venture between Luton Borough Council & Commercial Services Kent Ltd. Connect2Luton is an equal opportunities Employment Agency & Business. It positively encourages applications from all suitably qualified and eligible candidates

Solar O&M Engineer Luton - Can be based Bedford, Northampton and surrounding areas £40,000 - £45,000 + Bonuses (Up to £10,000) + Vehicle + Progression + Pension + Excellent Holidays + Overtime Are you an experienced solar engineer or commercial electrician looking to join a growing international business? Do you want an opportunity to progress your career while gaining additional qualifications and further training in high voltage equipment? This company provides specialist operations and maintenance to solar farms across Europe. Their portfolio has continued to grow and is expecting to consistently expand over the coming years, requiring highly qualified individuals to continue providing an industry leading service. In this role you will be conducting maintenance on a variety of electrical installations across multiple solar farms providing thorough reports to ensure operations continue smoothly. It provides you with autonomy to ensure work is completed to a high standard and also to engage and manage any subcontractors on site. You will receive additional training on high voltage equipment and have the opportunity to progress into more senior positions like SAP or Regional Team Leader as the company continues to grow. The ideal candidate will have experience in solar maintenance on a commercial or industrial scale with an 18th edition. You may also be an experienced commercial/industrial electrician looking to train into the Solar sector. You will have a broad range of knowledge across electrical systems such as cables, inverters, connectors, monitoring and communications but will also be looking to expand your knowledge and continually develop. This is a fantastic opportunity for an Electrician to join a renewable energy specialist and advance their career in the sector. The Role: Inspection and reporting on operations across solar farms. Routine maintenance on electrical installations. Fault finding on electrical components. Working with and managing external subcontractors to complete maintenance tasks. *£40,000 - £45,000 + Bonuses (Up to £10,000) + Vehicle + Progression + Pension + Excellent Holidays + Overtime The Person: Experience in the installation and/or maintenance of Solar equipment or commercial/industrial electrical equipment Level 3 electrical qualification and 18th edition. Clean UK driving licence. Willing to travel between multiple sites. Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Nathan Williams at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

HGV Technician / HGV Mechanic / HGV Fitter Location: Dunstable Pay: Up to £48,(Apply online only) per year | OTE £52,800 | Overtime at 1.5x Hours: 44 hours per week | Rotating shifts Monday–Friday 06:00–16:00 / 12:00–22:00 Shifts: Saturdays as required | Early finish on Fridays Job Type: Full time, permanent Tru Talent is a specialist recruitment agency placing experienced HGV Technicians and HGV Mechanics across the UK. About the Role Are you an experienced HGV Technician or HGV Mechanic looking for a well-paid role in Dunstable with strong overtime earnings? This is an excellent opportunity to join a busy commercial vehicle workshop offering up to £48,(Apply online only) per year with an OTE of £52,800 including overtime at 1.5x. Ideally suited to a technician with main dealer experience, this role will also consider an HGV Fitter or Commercial Vehicle Technician with strong all-round HGV experience and computer aided diagnostic skills. If you are an HGV Technician or HGV Mechanic looking for a rotating shift role in Dunstable with real earning potential, do not miss this one. What You Will Be Doing as an HGV Technician / HGV Mechanic / HGV Fitter you will be responsible for: Carrying out servicing, maintenance and repairs on HGVs to manufacturer and DVSA standards Using computer aided diagnostic systems to identify and resolve faults as an experienced HGV Mechanic Completing inspections and planned maintenance accurately and efficiently Maintaining accurate workshop records and service documentation Upholding workshop safety and cleanliness standards throughout each shift Pay and Benefits Up to £48,(Apply online only) per year depending on experience OTE £52,800 including overtime Overtime paid at 1.5x Rotating shift pattern with an early finish on Fridays Excellent company benefits package To be considered as an HGV Technician / HGV Mechanic / HGV Fitter or Commercial Vehicle Technician you will need: Proven experience as an HGV Technician, HGV Mechanic or HGV Fitter within a commercial vehicle environment Level 3 HGV Technician qualification or equivalent Excellent diagnostic skills including computer aided diagnostics Full UK driving licence — HGV Class 1 desirable How to Apply If you are an HGV Technician, HGV Mechanic, HGV Fitter or Commercial Vehicle Technician based in or around Dunstable, apply now using the button below or call James on (phone number removed). We aim to respond to all applications within 24 hours. INDHGV

Refrigeration Engineer – Retail / Supermarkets Permanent & Summer Contracts | Multiple UK Locations We’re hiring experienced Refrigeration Engineers for maintenance work across supermarket contracts. Permanent roles available in: West Scotland, Cumbria, Midlands, North Yorkshire, Bristol, Home Counties & Bedfordshire Also open to contract/temporary engineers UK-wide this summer. Package: • £45,141 (40 hrs) / £50,784 (45 hrs), • Standby 1 in 4: £195/week + OT, • Extra on-call: £150/day + OT, • £500 bonus (or tax-free vouchers) for additional cover Requirements: • Commercial refrigeration experience, • F-Gas, • Full UK driving licence

Plumbing & Heating Engineer – Luton – Ongoing- Price Work Plumbing & Heating Engineer – Engineer Package Overview: • Self employed Subcontractor Contract, • Monday to Friday, • Price Work, • Additional earning potential Company Overview – Plumbing & Heating Engineer Our client, a successful and fast-growing company are currently on the lookout for multiple plumbing and heating engineers to help them keep up with customer demand. This is a fantastic opportunity within a supportive and fun environment. You will be given support, training and the correct tools to carry out your role efficiently and effectively. This Company value their team and understand the importance of a good work life balance in order to maintain job satisfaction and staff retention. You will have a number of opportunities available to you and ideally you will be someone who will take full advantage of these. The work load within this company is carefully planned and allocated to ensure maximum efficiency. Team skill set, experience and individual location is carefully considered. Plumbing & Heating Engineer – Role and Responsibilities: · Install, repair, and maintain plumbing and heating systems in residential and commercial buildings · Plumbing works · Diagnose and troubleshoot · Perform routine maintenance tasks · Bathrooms mainly Tiling skills desirable · Take responsibility for the overall quality of the work delivered on-site · Ensure the company meets its obligations and adheres to guidelines and regulations · Work closely with other engineers and provide support and training to more junior members of the team Plumbing & Heating Engineer – Skills and Experience: • A full UK driving licence or equivalent (Essential), • A drive and enthusiasm to grab hold of opportunities, • A positive attitude and the ability to self-motivate is a must, • Proficiency in using hand tools and welding equipment, • A minimum of 2 years’ previous experience within a similar role, • CSCS Preferred, • City & Guilds DON'T MISS OUT ON THIS GREAT OPPORTUNITY - APPLY NOW Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful

Mobile Service Engineer (Commercial Bodybuilding) £40,000 - £42,000 + OTE £60- 65k + Progression + Commission Bonus Scheme + Full Training + On Call Pay + Van + Tools + Phone + Pension + Holiday Home Based Role (Ideally located: London, Luton, Stevenage, Chelmsford, St Albans, Bedford, Cambridge, Leighton Buzzard, Harlow, Oxford, etc) Are you a Vehicle Technician from a commercial body building / mechanical background, looking for a long term, stable career to with a market leading company offering door to door pay, fantastic progression opportunities and plenty of overtime? This hugely successful company are recognized as national leaders in their industry and have a great reputation for developing and progressing their engineers. This is an excellent opportunity to cover a local patch, servicing, repairing, and maintaining custom built vehicles, with the opportunity to progress to supervisor roles and increase your earnings via call out pay and overtime. On offer is a varied role where you will be responsible for visiting customer sites and providing roadside assistant to faulty or damaged vehicles. You will be working on repairing tail lifts, winches, shutters, shutter doors, roofs, rams, and also general electrical work. This role would suit a Service Engineer looking to join a well-established company who will give you specialist training, increase your earnings through overtime and a new company commission initiative, and have the chance to progress to supervisor and management roles where you can lead your own team of engineers. The Role: Carrying out Commercial Vehicle repairs, maintenance and servicing. Call out rota, overtime and training. *Field based covering a local patch. The Candidate: Mechanical / commercial body building / vehicle technician experience LOLER certification *Full driving license Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Billy Clark at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

PURPOSE OF POST: To organise and supervise a Street Cleansing crew and to ensure that street cleansing operations are carried out within the Borough of Luton. PRINCIPAL RESPONSIBILITIES: Clear all litter and dumped items within the Borough of Luton, the cleansing contract and provision of services under Best Value, including manual and mechanical sweeping, litter picking, wet washing, litter bin cleansing, clearing garage sites, clearing waste land, clearing up after special events, and clearing up after Road Traffic Accidents, weed spraying and gully cleansing. Undertake daily routine safety and maintenance checks to the vehicle to ensure that compliance to the Road Traffic Act and Transport Policy are kept to. Ensure that all necessary information that needs recorded is completed on time and accurately. Drive and manoeuvre a side loader van and trailer in a safe and effective manner, undertaking daily routine safety and maintenance checks to the vehicles. Drive and manoeuvre an applied sweeper, or other plant and equipment as may be required. Undertake on-site assessments of working conditions, health and safety risks, and safe working practices when undertaking street cleansing tasks and take any appropriate action to minimise risks to employees and members of the public. Report appropriate problems or defects to the Street Cleansing Supervisor for further action to be taken. Provide cover as a relief crew member for sickness/other absence occurring in Refuse Collection services. Person Specification: Carrying out litter picking and changing bins Demonstrable driving experience, preferably in an urban environment Able to follow verbal and written instructions Able to accurately record information, assessments and log sheet Demonstrable organisation skills - able to react to changing work demands at short notice Able to deal with members of the public in a polite and helpful manner A pair of safety bootsMon / Thursday is 6am till 14.30 and Friday is 6am till 11.00. Monday to Thursday is an 8 hour day with a 30-minute lunch break, working 37 hours per week. Time and half is paid for hours worked over 37 and double time for Bank holidays and Sundays worked About Us Luton Borough Council have partnered with Kent Commercial Service to create Connect2Luton, a recruitment managed service for all contingent temporary agency, contract and interim roles at the Council. Our heritage and being local government owned means we have a wealth of knowledge and expertise within the public sector, with many of our employees having previously worked for the Council or have supplied previously into the Council, for several years. We are an equal opportunities employment agency and business that positively encourages applications from all suitably qualified and eligible candidates. Connect2Luton is a trading style of Luton & Kent Commercial Services LLP - A joint venture between Luton Borough Council & Commercial Services Kent Ltd. Connect2Luton is an equal opportunities Employment Agency & Business. It positively encourages applications from all suitably qualified and eligible candidates

An excellent opportunity for a fully qualified Electrician looking to work for a rapidly expanding company who can offer further training, a great work life balance, and optional overtime. This leading company are experts in electrical maintenance and testing services for commercial clients around the UK. They are now in a period of rapid growth due to a number of recent contract wins, and are therefore looking for Electricians to join their expert team. In this Monday-Friday role you will be covering a local patch carrying out pre-planned and reactive maintenance, testing, and minor installation works at commercial sites. You will also be provided with further training and qualifications and have the chance to boost your earnings with optional overtime/call out on evenings and weekends. This role would therefore suit a fully qualified Electrician who is looking for a new challenge and the chance to join a rapidly expanding company who can offer training and a great work life balance. The Role: Pre-planned & reactive maintenance Testing & minor installs Covering a local patch Mon-Fri with optional call out/overtime £40,000 - £42,500 + Overtime + Paid Travel + Van + TrainingThe Person: Fully qualified Electrician - AM2/Gold Card Must have 2391 Experience working on commercial sites UK Driving LicenceRise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Industrial Gas Engineer Salary: £48k-£52k Location: Luton An exciting opportunity has arisen for an experienced Industrial Gas Engineer to join a leading food manufacturing business, supporting the maintenance, installation, and development of industrial oven systems. Working within a fast-paced production environment, you will play a key role in ensuring equipment reliability, supporting new installations, and driving continuous improvement projects across the site. Key Responsibilities: • Carry out maintenance, fault-finding, and repair of industrial gas-fired equipment, • Support the installation and commissioning of new oven systems, • Ensure all work is completed in line with current gas safety regulations and industry standards, • Identify opportunities to improve equipment performance and reliability, • Assist with the development and enhancement of industrial oven systems, • Work closely with engineering and production teams to minimise downtime and maximise efficiency Key Skills & Experience: • Proven experience working with industrial gas-fired equipment, • Strong fault-finding, diagnostic, and problem-solving skills, • Experience carrying out maintenance and installation activities within an industrial environment, • Good understanding of gas safety regulations and compliance requirements, • Ability to work independently and as part of a multidisciplinary engineering team, • Experience working on industrial ovens, burners, or thermal processing equipment would be advantageous Qualifications: • Valid ACS Gas Qualifications including COCN1 (Core Commercial Gas Safety), • CENWAT, CPA1, or CORT certification, • Current Gas Safe Registration If you're looking to join a well-established manufacturing business where you can apply your technical expertise while contributing to equipment improvement and site performance, then apply with a copy of your CV

Industrial Gas Engineer Salary: £48k-£52k Location: Luton An exciting opportunity has arisen for an experienced Industrial Gas Engineer to join a leading food manufacturing business, supporting the maintenance, installation, and development of industrial oven systems. Working within a fast-paced production environment, you will play a key role in ensuring equipment reliability, supporting new installations, and driving continuous improvement projects across the site. Key Responsibilities: Carry out maintenance, fault-finding, and repair of industrial gas-fired equipment Support the installation and commissioning of new oven systems Ensure all work is completed in line with current gas safety regulations and industry standards Identify opportunities to improve equipment performance and reliability Assist with the development and enhancement of industrial oven systems Work closely with engineering and production teams to minimise downtime and maximise efficiency Key Skills & Experience: Proven experience working with industrial gas-fired equipment Strong fault-finding, diagnostic, and problem-solving skills Experience carrying out maintenance and installation activities within an industrial environment Good understanding of gas safety regulations and compliance requirements Ability to work independently and as part of a multidisciplinary engineering team Experience working on industrial ovens, burners, or thermal processing equipment would be advantageous Qualifications: Valid ACS Gas Qualifications including COCN1 (Core Commercial Gas Safety) CENWAT, CPA1, or CORT certification Current Gas Safe Registration If you're looking to join a well-established manufacturing business where you can apply your technical expertise while contributing to equipment improvement and site performance, then apply with a copy of your CV. TPBN1_UKTJ

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As Senior Research Engineer (Process Development) you will draw on your diverse engineering background and product lifecycle awareness to progress a variety of research activity in the TRL1-6 range. You must have sound experience in leading technical work, including budgeting, schedule and risk management. You will be capable of achieving through others internally and externally, and you will be committed to development of your own skills and professional network. Your good communication skills shall enable you to confidently engage with a wide variety of internal and external stakeholders. Core operational hours at our Luton site are 07:3016:30, Monday to Thursday, and 07:3012:30 on Fridays. The role requires a willingness to undertake occasional national travel for customer meetings. There is also the opportunity to work from home for up to two days per week, subject to business needs. Job Responsibilities Responsible for the technical delivery of allocated project deliverables, or project work packages, ensuring the research objectives have been satisfied. Support or lead any necessary 'hands on' development test work and development trials that are required to meet your Work Package/Work Stream delivery objectives. Support or lead the design of external work packages to be carried out by third parties to meet project research objectives. Responsible for accurately capturing and recording data and results from test work and development trials. Responsible for raising and issuing high quality and detailed technical documentation. Seek to understand the strategic direction of the target products or manufacturing process technologies being developed within your project(s). Contribute to Technology Development Plans and Technology Business Cases within your project(s). Contribute to multi-year planning and internal/external funding proposals as required. Suggest and explore exploitation routes, aligned with the guidance of the Work Stream Lead. You may support project stakeholder management with internal/external customers, and you may lead management of supply chain partners in some cases. Take an active role in creating a personal development plan linked to GKN's TEF and will be responsible for delivering on agreed objectives supported by your line manager. Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: A relevant, accredited Engineering or Science based degree OR relevant industry experience Good general engineering/technology knowledge base and can demonstrate strategic thinking. Experience managing budgets on a work package level or smaller Work Streams. Good working knowledge of general industrial manufacturing processes, and an interest in understanding new and emerging techniques. Good working knowledge of AS9145 APQP/PPAP requirements and tools supporting Zero Defect Manufacturing approaches. Good working knowledge of Lean manufacturing philosophies and Six Sigma / Statistical techniques for process control and problem solving. Logical and methodical approach to work package planning and costing. A strong self-starter, competent to work with general goal-based direction as well as more specific task-based requirements. Experience managing deployed resources (people you lead but you are not their line manager). Experience engaging with production teams and you can identify operational requirements and incorporate in to your project(s) as appropriate and as agreed. Good interpersonal and communication skills, and can confidently translate complex information to a variety of audiences and you are able to represent your project(s) and GKN values in internal/external review meetings Desirable: A higher degree qualification such as a Masters, PhD or EngD Chartered Engineer with a relevant institution Experience in Composite Manufacturing Processes We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

What we need: Carrington West is pleased to be working with our client for a Senior Quantity Surveyor, required for works in the highways sector for an established yet growing company based in Luton. As the successful Senior Quantity Surveyor, you will support the Lead QS, monitoring all cost and maximising value across all projects. Upon joining our clients Luton based team you can expect a high degree of autonomy and exceptional standards of professionalism and customer service. Our clients can offer a challenging and rewarding role to someone who can demonstrate: - A recognised qualification in Quantity Surveying or related subject. - Good experience and detailed knowledge of working with the NEC suite of contracts. Ideally you will have experience overseeing highways term maintenance works. - Strong communication skills and a willingness to go above and beyond client expectations. - The ability to work on one's own initiative whilst understanding the need to stay within the existing commercial procedures. - A high level of proficiency in MS Office, including Excel as well as completing CVR's and overseeing subcontract accounts. The position is for an immediate start and requires office presence 5 days per week. For more information, please click APPLY NOW or call Jay Cochrane today on (phone number removed). FOOTNOTE: If you feel that you are right for this role technically, but the rate, location or seniority does not suit you specifically then please still feel free to send us your CV. We constantly recruit for roles very similar to this one at all levels UK Wide. We are always keen to chat with you discreetly about your employment situation. Even if you are happy in your current role for now, we always welcome calls from Highways, Infrastructure & Transportation professionals keen to make their introductions for future months or years. Our specialist team has a combined 100+ years' experience in this market. Please call Jay Cochrane at Carrington West on (phone number removed) for more information. By applying for this position, you are agreeing for Carrington West to hold and process your personal data in accordance with our Data Protection Policy. Your data will be shared with third party clients specifically relevant to any roles you have applied for. If at any stage, you wish to withdraw your consent please contact us

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. The Luton Engineering & Technology team is focussed on developing product and manufacturing process technology related to aircraft ice protection systems, transparencies and coatings for both civil and defence applications. We are looking for a Design Engineer to join our Transparencies team to support new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows. This is more than a CAD role, as a Design Engineer you will be responsible for creating and maintaining product definition and ensuring ongoing product performance against requirements. Working across the product lifecycle you will be involved in: New product development activities including requirements management, geometric design, materials selection, specifications, product verification, qualification and certification testing. Product sustaining activities including MRB, customer concession management, manufacturing problem solving, engineering change management and in service technical support to our customers as a part of an Integrated Programme Team. Continuous improvement of products, processes, tools and design handbooks to ensure the highest standards of quality and compliance to evolving customer, regulatory, and airworthiness requirements. Core operational hours at our Luton site are Monday to Thursday, 07:3016:30, and Friday, 07:3012:30. Some flexibility may be available, subject to agreement with manager. There may also be an opportunity to work from home one day per week, depending on business needs. Occasional travel, both nationally and internationally, may be required to meet suppliers, customers, and visit other GKN Aerospace sites. Job Responsibilities Develop design solutions compliant to customer, regulatory, and airworthiness requirements within assigned programmes/ projects budget and timescale. Create and maintain design definition documents including drawings, specifications and reports detailing dimensions, materials, manufacturing process requirements and tolerances needed to ensure functional design requirements are met. Understand the qualification process of products and prepare compliance documentation to internal, customer, and regulatory requirements where applicable. Represent Design Engineering function in Integrated Program Teams (IPT) and Material Review Board (MRB). Identify and resolve product non-compliances with drawing, specifications, or standards. Provide technical support by implementing solutions to address non-conforming products. Create supporting documents such as permits, concessions, rework schemes etc. Support internal and external technical reviews including formal gate reviews by creation and preparation of technical data and presentations of product design. Contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Ensure EHS policy and process adherence for your activities, and you will contribute to a proactive EHS culture in the wider team. Take an active role in team engagement surveys, activities and in creating a personal development plan supported by your line manager Profile description: To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Bachelors degree in Mechanical, Aerospace, Electrical or any relevant Engineering field Good interpersonal and communication skills, able to create clear, concise and accurate technical content. Logical and methodical approach to task planning and be able to demonstrate an evidence-based approach to decision making and problem solving. Able to work independently and as part of a multi-disciplinary team. Working knowledge of MS Office suite. Desirable: Previous experience in Aerospace sector Experience of Configuration Control & Change Management Awareness of Aerospace certification requirements. Experience of using CAD software, preferably CATIA V5. Experience of using SAP You should have an understanding of the product development lifecycle, design practices and manufacturing methods. This is a hands on role, and the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You should be adaptable in your approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met. As a Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development. Please note: Some GKN Aerospace programmes are subject to regulatory restrictions which may impact certain Nationalities, as such part of the application process you are asked to declare. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Electric Vehicle (EV) salary sacrifice scheme (Insurance, servicing, maintenance, roadside assistance and more included) Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? ? TPBN1_UKTJ

Connect2Luton are excited to recruit a Grounds Maintenance Operative on behalf of Luton Borough Council within their Place & Infrastructure department. Main purpose of position: To undertake a range of horticultural/grounds maintenance and sports turf maintenance tasks throughout the Borough of Luton. As a Grounds maintenance Operative, you will be responsible to Undertake grass cutting and other grounds and gardens maintenance duties to specified standards using a wide range of ride on and pedestrian controlled plant and machinery, hand held equipment and hand tools. Paying particular attention to the security of parks/work locations by ensuring that all areas are left secure & with barriers locked. Assist higher graded employees to mark out sports pitches, undertake fine turf maintenance, and gardening duties such as shrub pruning and planting to recognised horticultural standards. Undertake duties, such as hoeing, weeding, digging, leaf raking, grass cutting, ground working and hedge cutting to the required standards. Undertake litter picking by hand in parks and amenity areas throughout the Borough to specified standards. Sweep hard surface areas by hand, as and when required, to remove glass and other extraneous material.Skills and Experience Some experience of using grass cutting machinery Some gardening experience Able to work well as part of a team Able to use own initiative when undertaking tasks Able to deal politely and tactfully with a wide range of people Able to follow verbal and written instructions Current valid category B driving licence, to operating ride on machinery and to transport staff and equipment to various sitesAbout Us Luton Borough Council have partnered with Kent County Council to create Connect2Luton, a recruitment managed service for all contingent temporary agency, contract, and interim roles at the Council. Our heritage and being local government owned which means we have a wealth of knowledge and expertise within the public sector, with many of our employees having previously worked for the Council or have supplied previously into the Council, for several years. We are an equal opportunities employment agency and business that positively encourages applications from all suitably qualified and eligible candidates. Connect2Luton is a trading style of Luton & Kent Commercial Services LLP - A joint venture between Luton Borough Council & Commercial Services Kent Ltd. Connect2Luton is an equal opportunities Employment Agency & Business. It positively encourages applications from all suitably qualified and eligible candidates

Air Conditioning Engineer £40k-£45k plus package Company based in Luton Full job description Qualifications and Skills Person Specification • 5 years Experience as an Air conditioning Engineer', • Must hold Refrigerant Handling C&G 2079 or equivalent., • NVQ 2 or equivalent in Refrigeration and Air Conditioning, • A good general experience in working in occupied premises, • A good understanding of Health & Safety procedures, • The ability to communicate at all levels, • Generally IT literate, • Clear communicator both oral and written, • A customer focused approach. Benefits Package Offered • Company Van and Fuel Card, • Company Phone and Tablet, • On Going training, • Pension Scheme, • COVID-19 considerations: All PPE provided We are looking to recruit a Mobile Air Conditioning Engineer. My client want engineers who believe the same as the rest of the team in providing safe and comfortable buildings for our clients. They believe that well trained, presented and friendly engineers are the key to our business success and we are happy to train and develop engineers who believe the same. Main Duties Undertake maintenance tasks, call out response & repair of all types of commercial air conditioning and ventilation systems. A good understanding of General Mechanical Building services Efficiently maintain and repair To carry out diagnostic, fault finding Maintain PPM Paperwork To identify areas for additional works within and out of the specified contractual requirements To understand, complete all work related documentation accurately on time and to exceed the customers expectations. To understand & comply with policies and procedures To carry out work in a safe and diligent manner To comply with all Health and Safety policies and procedures To attend, fully participate in training and appraisal activities as required To undertake additional duties in line with capabilities as required Responsibilities and Duties Working Hours • Monday to Friday 8am to 5pm, • ½ lunch break, • 30 days holiday per annum including bank holidays, • Be available for call out rota 1 week in 6., • Out of hours call outs paid at a minimum of 4 hours at overtime rates. Qualifications and Skills Person Specification 3 years Experience as an Air conditioning Engineer' Must hold Refrigerant Handling C&G2079 or equivalent. NVQ2 or equivalent in Refrigeration and Air Conditioning A good general experience in working in occupied premises A good understanding of Health & Safety procedures The ability to communicate at all levels Generally IT literate Clear communicator both oral and written A customer focused approach. Benefits Package Offered • Company Van and Fuel Card, • Company Phone, • On Going training, • Vitality Healthcare, • Pension Scheme Job Types: Full-time, Permanent Sounds like you please send George your cv in the first instance

Air Conditioning Installation Engineer (Self-Employed) Luton £(Apply online only) a Day About the Air Conditioning Installation Engineer Role Our client, a reputable and growing Air Conditioning specialist, is looking to recruit an Air Conditioning Engineer to strengthen their team and support ongoing business expansion Key Air Conditioning Installation Engineer Responsibilities • Carry out installations across mixed contracts including residential and small commercial, • Work on systems including splits, multi-splits, VRV/VRF, and chillers, • Some maintenance and fault finding works, • Ensure all work is completed to a high standard and in line with F-Gas and industry regulations, • Liaise with clients and provide technical support when required Air Conditioning Installation Engineer Requirements • F-Gas Category 1, • 4 Years+ Experience, • Full UK driving licence + Own Vehicle

Service Advisor - £32,000 – Main Dealership – Luton Please only apply if you have Main Dealership experience Our client, a main dealership is looking for a high-performing Service Advisor to join their successful Aftersales team. The Service Advisor role comes with a competitive salary of £32,000 with an excellent benefits package. Monday to Friday 8am-6pm 1 in 3 Saturday's 8am-1pm 22 days holiday (plus bank holidays) Pinewood/Pinnacle systems Pension Generous commission schemes Key Service Advisor Roles and Responsibilities: Ensure customers are aware of service and repair work required to their vehicles in a professional manner As a Service Advisor you will advise on timescales and collection arrangements Produce job cards on the in-house computer system Minimum Service Advisor Requirements: Experience in a similar role, as a Service Admin / Service Advisor or similar Experience with Kerridge/Pinnacle/DRIVE/ONELink An ability to sell additional products and services to customer Experience in using commercial databasesJob Type - Permanent Hours - Full time Job Title - Service Advisor If you are interested in this Service Advisor role, please apply today! Automotive Service Advisor: Auto Service Consultant, Car Service Advisor, Automotive Customer Representative, Vehicle Maintenance Advisor, Automotive Service Specialist

Connect2Luton are excited to recruit a Minute Taking Administrator i on behalf of Luton Borough Council. Main purpose of position: The post holder will provide high level administration support and information to the Strategy, Engagement & Implementation. They will support the management of the Team inbox's to action the tasks according to priority with the aim of improving the quality of data that is recorded on social care systems. They will also provide support to ensure the efficient running of projects. They will support the administration tasks in relation to external suppliers and contribute to the performance management in relation to the key performance indicators set. As a Business support officer you will be responsible to: Undertake and lead on complex administrative tasks in a high volume and deadline driven environment Manage specific project support tasks with minimal supervision as part of own workload as required by line management Support the management of team email box(s) to ensure action in a timely way ensuring accurate recording Ensure data recorded is accurate and concise Creation, development and maintenance of records, files and statistical information for evidence based data Handle conflicting priorities from managers being aware of public scrutiny and partnership working within LBC and with local stakeholders requiring a high level of professionalism Taking on a coordination function between the council and externally commissioned resource to support timely actions and forward planning Manage the logistics and administration of all identified project meetings, to include suitable minute taking records, ensuring the division maintain a uniformed communication strategy and information flow across all meetings Maintain and collate management information to meet divisional management requirements, and produce periodic reports within defined time-scales to enable management to review performance Develop, implement, maintain and monitor administrative systems and procedures to support operational needs of the division, ensure the team is up to date with public information, national and local policies, procedures and strategy Be able, and as a nominated responsible officer, to undertake the processing of invoices, and stores requisitions, managing the distribution and the returning of laptops and equipment as and when required , maintaining accurate records To participate and where required facilitate working relationships with teams and staff from other divisions to ensure consistency as far as practicable Contribute to the maintenance of a healthy, safe, effective working environment, monitoring compliance with legal and regulatory requirements including H&S, property, equipment issues, and IT facilities Ensure that relevant corporate and departmental procedures are available and kept up to dateSkills and Experience Demonstrable administrative experience including developing, managing and maintaining complex administrative systems and procedures Some experience of organising and leading project work Previous local authority experience or Social Care setting Ability to communicate and build effective relationships with staff and stakeholders in a polite manner at levels Ability to write clear letters and reports Good IT skills Able to use own initiative Ability to perform basic calculations and analyse and interpret data Excellent administrative and organisational skills Able to provide a quality service to customers Some understanding of national policy surrounding health and social care Education to Level 2 Business management or equivalent experience Able to attend meetings and undertake work at various locations throughout the BoroughAbout Us Luton Borough Council have partnered with Kent County Council to create Connect2Luton, a recruitment managed service for all contingent temporary agency, contract, and interim roles at the Council. Our heritage and being local government owned which means we have a wealth of knowledge and expertise within the public sector, with many of our employees having previously worked for the Council or have supplied previously into the Council, for several years. We are an equal opportunities employment agency and business that positively encourages applications from all suitably qualified and eligible candidates. Connect2Luton is a trading style of Luton & Kent Commercial Services LLP - A joint venture between Luton Borough Council & Commercial Services Kent Ltd. Connect2Luton is an equal opportunities Employment Agency & Business. It positively encourages applications from all suitably qualified and eligible candidates

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. Based at our Luton Manufacturing site as the Manufacturing Engineering Manager Tooling youll be working across both our Defence and Civil business lines. You will provide and lead a team of Tooling and Cad Engineers in the design, manufacture and maintenance and control of all Site Tools. This will involve the technical capability to create and design tools as solutions to support the manufacturing operations. Youll be accountable for delivering robust, capable manufacturing process technology as it applies to materials, tooling, part fabrication and assembly. The role involves the creation of significant tooling designs from initial concept through to production for the production of aircraft transparencies and Ice Protection Tooling, jigs and fixtures. Among other activities, this will include responsibilities for 4 large CNC machines on site and calibration of current and the development of new or existing tooling. Supporting Manufacturing Engineering teams may also be required. The successful candidate will be experienced in a relevant engineering discipline and have a hands on approach, be able to prioritise jobs, be comfortable liaising with suppliers and other departments. Furthermore responsibilities for Manufacturing Engineering Configuration control, using SAP and more traditional documentation such as Specifications and Routings. The role will also provide leadership, coaching and mentoring to a small team of Tooling Engineers on the Luton site, supporting the Manufacturing Engineering Managers in matters of staff performance and development. The role will also be responsible for the overall load and capacity management of the tooling team members and provide reports and updates on tooling work plans as required by the Manufacturing Engineering Managers and/or Site Head of ME. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. There is the requirement for flexibility for occasional travel in the UK. Job Responsibilities Exemplifying a safety-first mind-set and ensuring compliance with the GKN Aerospace Health, Safety and Environmental policies and standards. Responsible for the development and support with technical solutions to complex problems within GKN Aerospace environment, our customers and suppliers by utilizing root cause analysis, preventative and corrective action to reduce and support to eliminate non-conformances. Maintain positive, team relationships with internal and external customers, as well as co-workers Responsible for tool fabrication quotes, tooling design and input for new product quotes, tooling configuration changes that involve cost estimation and schedule coordination and New Projects Introduction support. Act as key interface between external tooling suppliers and internal customers such as Program Managers and Engineering Managers Manage and maintain Tooling Engineers workload, skill and development, EHS and welfare to ensure tooling work is sufficiently resourced by the business with appropriate metrics and KPIs Leadership of CNC Engineers and technicians to support production processes on large 5 axis CNC machines Configuration control of Manufacturing documentation to support operations, costings, BOMs routings and specifications. Creation, control and maintenance of master tooling registers for both customer and domestically owned tooling suites Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Technical expertise in Tooling solutions (Engineering), with a professional qualification (BEng, BSc, HNC) or strong background in engineering (Aerospace, Mechanical, or Automotive). Working knowledge of design for manufacture principles and tool/component manufacturing methods and able to provide technical input at all levels of work. Ability to create engineering drawings with an understanding of geometric tolerances and datum features. Organised and structured approach to tasks. Experience in tooling for composites and/or transparencies. Experienced in CAD 3D modelling and drafting (Catia V5). Understanding of inspection/calibration methods and interrogation of results. Be compliant with the Companys Environmental, Health & Safety and Energy procedures. Be proficient in English language, both written and spoken. Desirable: Project Management experience. Understanding of export control and compliance and security marking requirements. Working knowledge of quality system models such as ISO9000, AS9100, or D1-9000. Experience of New Product/process Introduction (Industrialisation) & existing production process improvements. We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Manufacturing Engineering Manager Tooling will have the ability to be agile and shift focus on competing priorities. The successful person will be a self-starter, able to manage own workload with excellent communication skills. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Discount with local nursery and preschool childcare setting Enhanced family friendly leave A collaborative, dynamic working environment As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ? TPBN1_UKTJ

Position: SALES MANAGER Location: Dunstable, Beds Salary circa basic £45-50,000 plus bonus OTE circa £90,000 (uncapped) Days/Hours of Work: Mon -Thurs 8am - 5pm (4pm finish Friday) (39 hours per week) Benefits: free parking pension 33 days holidays (inc bank holidays) Company closed over Christmas / New year period (must use some holidays for the days in-between) car allowance after probation period Company: a UK leading company supplying bespoke engineering products and on-going servicing and maintenance to mainly the construction sector. Established for over 40 years, the company is a key employer to the local market, producing and engineering its unique products, locally. They have supplied and perform on-going maintenance to some of the UKs more iconic landmarks and are experiencing great demand across the market from hospitals to high rise luxury apartment blocks. A fun, engaging company that work as a team to ensure a positive and engaging environment. If you are a proven, experienced, driven and inspiring Sales Manager looking for your next opportunity, then we could have just the role for you! Please read on... We are seeking an experienced Sales Manager with a strong background within the construction and building services industry. You will lead sales growth by developing new business, managing key accounts and further strengthening the companies market position. The ideal candidate has excellent knowledge of construction regulations, British Standards compliance and a solid length of service in the construction sector, as a proven and celebrated Sales Manager. Key Responsibilities • Drive new business opportunities across target sectors, including commercial, residential, education, healthcare and mixed-use developments., • Identify, qualify and convert high-value leads through strategic prospecting and market engagement., • Build and maintain a strong pipeline with accurate sales forecasting., • Develop and nurture long-term relationships with architects, contractors, developers, consultants and end-users., • Act as the key point of contact for proposals, pricing negotiations and contract discussions., • Represent the brand at industry events, exhibitions and networking forums., • Maintain up-to-date records within the CRM system, ensuring data integrity and insight for reporting., • Coordinate with internal teams (design, technical, operations, servicing) to ensure seamless project delivery., • Apply working knowledge of British Standards, Building Regulations and Gateway 2 requirements in sales strategies and client engagements., • Provide insight on regulatory compliance to support specification and tender responses., • Mentor and support junior sales executives., • Contribute to the continuous improvement of sales processes, tools and training. The Candidate Essential • Proven experience in a sales or business development role within the construction industry, building services, engineered solutions or similar sectors., • Established network of industry contacts and the ability to influence at senior levels., • Demonstrable success managing complex sales cycles and achieving targets., • Strong working knowledge of relevant British Standards, Building Regulations and experience with Gateway 2 procurement stages., • Excellent communication, negotiation and presentation skills., • Experience using and managing CRM systems effectively. Desirable • Leadership or team management experience., • Technical understanding of building infrastructure products or systems. If you think you are the right proven Sales Manager for this position, then please send your CV to James Newbury Appointments for review. If you do not hear back within 3 working days, unfortunately, you will not have been shortlisted on this occasion, but we would like to thank you for your interest and wish you success in your search for your next opportunity