Trabajos electrical en Charleston, South CarolinaCrear alertas

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is seeking an Associate Flight Controls Mechanical Hydraulics Design & Analysis Engineer to join our 787 Flight Controls Mechanical Hydraulics Engineering team located in North Charleston, South Carolina. The Mechanical Systems Design and Analysis Engineer will support the development of one of the following sub-teams within the Flight Controls Mechanical Hydraulics team: Primary Flight Control Systems, High Lift Systems, Flight Control Electronics, Hydraulic Systems, Landing Gear Actuation and Steering Systems, Brake Control Systems. This requisition is seeking accomplished, self-motivated engineers to design, analyze, test, certify, and support flight control and mechanical hydraulic systems and components (e.g. mechanical and hydraulic actuators [linear and rotary], electro-mechanical valves, hydraulic valves, sensors [LVDTs, RVDTs, Resolvers], gearboxes, torque tubes, electronic control units, and more) for the 787 family of aircraft as well as to support the production and fleet operations of this equipment. This requisition is for multiple positions in multiple flight control and mechanical hydraulic disciplines performing many of the tasks listed below. The Mechanical Systems Design and Analysis Engineer should be able to establish hand-calculations to spot-check computational analysis, perform multi-variable engineering analysis, develop test procedures to validate analysis tools, and develop Systems/Components interface requirements. In addition, candidates should have clear communication skills for reporting progress to a wide audience, the ability to develop a set of project goals and objectives, develop a project schedule, maintain and execute engineering on time. Strong candidates should have technical knowledge in one or more of the following areas: system controls, mechanical systems, electrical systems, systems modeling, Electro-mechanical actuation, thermodynamics and fluid dynamics, aircraft certification, experience with model correlation from data to analysis tools, and experience with Cameo, Matlab/Simulink, Scripting code (Matlab, C ++, Python), and/or experience with physical modeling tools such as Easy5, Adams, or Simscape. Position Responsibilities: Resolves airplane level requirements into system level requirements and resolve system level requirements into component requirements with time and cost-efficient validation methods. Participates in system, component, and detail design efforts with thorough documentation within schedule and cost constraints to create error free, readily manufactured system and component specifications and drawings. Participates in system level and component level validation analysis and testing, including plan creation; system and component test rigs; test monitoring; analysis and test report authoring; supplier test report review and approval; test failure analysis; and test failure mitigation. Participates in system, component, and detail certification efforts, including creation of required certification artifacts, such as, system safety analysis, failure modes and effects analysis, and fault tree analysis; confirming and demonstrating traceability to regulatory requirements; and resolution of regulation conflicts. Supports on-going production efforts including timely resolution of build problems at Boeing and supplier manufacturing facilities; identifying and implementing design improvements to build accuracy, build rate, and production line safety; and timely resolution of rejections, functional test failures and flight squawks. Supports global fleet operations including subject matter expert consultation for airline and regulator queries; participate in and lead resolution efforts to resolve Service Related Problems (SRP); and analyze reported flight incidents to provide recommendations to the Safety Review Board (SRB) for Continued Operational Safety Program (COSP) determinations. Generally, these activities require successful cross-functional coordination within and outside of Boeing including with: manufacturing, avionics, crew-ops, airplane safety, aerodynamics, supply chain management, BCA systems software, suppliers, airline customers, and regulatory agencies. Gathers, defines and documents system level requirements to support flight control and mechanical hydraulic requirements definition. Resolves requirement conflicts. Performs and documents analysis and design of mechanical systems to validate or assess the system design or models. Develops solutions and disposition of issues to assure customer satisfaction. Develops system and subsystem architecture alternatives to meet requirements and objectives. Analyzes and compare alternatives (trade study) to rapidly converge on preferred configurations including defining and executing system simulations and development test programs. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences). 2 or more years' related work experience. 2+ years of professional experience working in an engineering field. 1+ years of experience with Mechanical Systems. Preferred Qualifications (Desired Skills/Experience): Experience mentoring and developing others. Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Associate (Level 2): $85,000 - $115,000 Additional Information: All information provided will be checked and may be verified. Applications for this position will be accepted until Nov. 21, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is seeking a Mechanical Systems Design and Analysis Engineer (Experienced or Senior) to join our 787 Environmental Control Systems (ECS) Engineering team located in North Charleston, South Carolina. The Mechanical Systems Design and Analysis Engineer will support the development of one of the following sub-teams within Environmental Controls Systems (ECS): Cabin Air Conditioning, Liquid Cooling, Air Distribution, Cabin Pressure Control, Fire Protection and Smoke Detection, Ice and Rain Protection, Air Quality, and Electrical. This role will be primarily focused on component/systems equipment management, where daily tasks will be interfacing with a component supplier and various Boeing support groups. Other responsibilities are updating analysis models, tool sets, supporting changes to design, addressing obsolescence, developing product improvements, supporting production build and test, new customer introduction, and in-service fleet projects. The Mechanical Systems Design and Analysis Engineer candidate should have some experiences comparable to the following key skills: establish hand-calculations to spot-check computational analysis, develop test procedures and systems/components interface requirements. In addition, the candidate should have experience in clear communication skills for reporting progress to a wide audience, the ability to develop a set of project goals and objectives, developing a project schedule and on time execution. Furthermore, they should have technical knowledge in an area comparable to: system controls, mechanical systems, systems modeling, heat transfer, thermodynamics, fluid dynamics, and/or experience with model correlation from flight test data to analysis tools. Position Responsibilities: Experienced (Level 3) Supports Requirements Traceability & Development Assurance. Supports System Safety Analysis Documentation, including the creation of Fault Hazard Assessments (FHAs), Failure Modes and Effects Analysis (FMEAs), Fault Tree Analysis (FTAs). Supports the development, maintenance, or modification of system, component, and installation designs/proposals to provide design documentation to downstream groups. Modernizes analytical models into modern tool sets Support technical meetings and planning efforts, contributing technical information to wide range of audiences. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Integrates several federated ECS flow-analysis or heat transfer models into a singular tool-set. Supports system components' designs/proposals standards to provide installation and detail documentation. Contributes to supplier development, test, and production activities and directs the supplier to optimize integration and achieve program goals. Supports Lab, Flight Test, Factory, and Airplane Delivery Center Support. Supports the creation and maintenance of airplane support manuals such as Fault Isolation Manuals (FIM), and Component Maintenance Manuals (CMM) Trains others. Works under general direction. Senior (Level 4) Lead Requirements Traceability & Development Assurance. Lead System Safety Analysis Documentation, including the creation of Fault Hazard Assessments (FHAs), Failure Modes and Effects Analysis (FMEAs), Fault Tree Analysis (FTAs). Lead the development, maintenance, or modification of system components' designs/proposals to provide installation and detail documentation. Lead integration and modernization of analysis tools/modeling Lead technical meetings and planning efforts, presenting technical information to wide range of audiences. Reviews and finalizes documents analyses to validate and verify systems and components meet requirements and specifications. Support proposal preparation and new business development efforts. Manage supplier development, test, and production activities and directs the supplier to optimize integration and achieve program goals. Lead Lab, Flight Test, Factory, and Airplane Delivery Center Support Lead the creation and maintenance of airplane support manuals such as Fault Isolation Manuals (FIM), and Component Maintenance Manuals (CMM) Train and coach others. Work under minimal direction. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences). Level 3: 5 or more years' related work experience or an equivalent combination of education and experience. 3 or more years' of experience with Mechanical Systems. 3 or more years' of professional experience working in an engineering field. 3 or more years' of experience working with cross-functional teams. Ability to travel domestically and internationally 10%. Preferred Qualifications (Desired Skills/Experience): Level 4: 9 or more years' related work experience or an equivalent combination of education and experience. Level 3/4 - Experience mentoring and developing others. 5 or more years' of experience in aerospace related role. 5 or more years' of experience working in requirements validation and verification. 5 or more years' of experience with airplane certification. 5 or more years 'of experience reading and interpreting engineering drawings, procedures, and specifications. 5 or more years' of experience in environmental controls systems engineering roles. 5 or more years' of demonstrated project management skills. Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Experienced (Level 3): $103,700 - $140,300 Senior (Level 4): $126,650 - $171,350 Additional Information: All information provided will be checked and may be verified. Applications for this position will be accepted until Nov. 21, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Commercial Airplanes (BCA), 787 Interiors organization is seeking multiple Experienced or Senior Cabin Systems Engineers to join our team in North Charleston, SC. At Boeing, we are dedicated to designing and integrating advanced electrical cabin systems to advance the future of our airplane interiors and passenger experience. Our projects focus on translating high-level concepts and requirements into the system design, ensuring the seamless physical integration of electrical systems and components within our aircraft. We collaborate with a global supplier network to implement cutting-edge system hardware and software, validating our designs through rigorous testing. Our engineers work on aircraft systems from initial concept through certification, delivery, and throughout their production lifecycle, continually pushing the boundaries of innovation in commercial air transport. This position will specifically involve working with Cabin Systems, which encompasses interior lighting, passenger address systems, in-flight entertainment, seatback video, passenger connectivity, satellite connections and more. Our teams are currently hiring for a broad range of experience levels including Experienced and Senior Electronic Systems Design and Analysis Engineers. Our team is currently hiring for a broad range of experience levels including Experienced (Level 3) Senior (Level 4) Systems Engineers. Position Responsibilities: Develops and documents complex electronic and electrical system designs. Tests and validates to ensure system designs meet operational and functional requirements Assists in monitoring supplier performance to ensure system integration and compliance with requirements Solves problems concerning fielded hardware and software over the entire product lifecycle Researches specific technology advances for potential application to company business needs Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 3+ years of experience with Cabin Systems engineering or equivalent in a related field. Demonstrated design and system thinking skills Preferred Qualifications (Desired Skills/Experience): Level 4: 5+ years of experience with Cabin Systems engineering or equivalent in a related field.. Experience with Cabin Systems Experience working with suppliers Experience interfacing with E-UMs/the FAA and/or other certification regulatory agencies Exceptional organizational skills with attention to detail. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay Range Summary: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range Experienced Level 3: $112,200 - $151,800 Summary pay range Senior Level 4: $136,850 - $185,150 Applications for this position will be accepted until Nov. 27, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Our Boeing Commercial Airlines (BCA), SWI (Seat Wire Integration) Electrical Design organization has an exciting opportunity for an Associate Wiring Design and Installation Engineer (Level 2) in North Charleston, South Carolina to help us define the future of commercial aerospace with innovative ideas that advance our culture of safety and quality that our customers, the flying public, expect. Position Responsibilities: This role will focus heavily on 787 seats and interiors. You will be responsible for developing and maintaining electrical product detail, assembly and installation designs (e.g., cable routing and geometry, brackets) for our diverse portfolio of advanced Commercial Aircraft. Our greatest current need involves developing and maintaining critical electrical cable/wire harness installation, detail and assembly designs. This includes defining the physical routing layout of wire routing throughout the airplane. You must take into account such requirements as wire supports and brackets, separation to maintain physical and functional safety, proper parts selection, as well as environmental impacts on the many parts that make up the system of wire harnesses. All while ensuring that Safety and Quality are the number 1 priority. You will also develop and analyze engineering design disposition on discrepancies (e.g., rejection tags, production action requests and shop revision requests). This often involves working closely and collaborating with our partners on the factory floor to ensure our designs can be built efficiently and safely. You will follow and look for improvements to documented processes, specifications and procedures that support safe and quality design and manufacture of electrical commodities. You will develop basic statements of work. Also, participate in technical reviews of supplier capabilities to facilitate source selection. You will analyze functional and physical requirements to assure the development of integrated designs and system architecture. Actively supporting critical analysis and design reviews. You will work with and under general supervision of a lead engineer and an experienced mentor to enhance both your technical learning and career growth. This position is expected to be 100% onsite. The selected candidate will be required to work onsite in North Charleston, South Carolina. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 2+ years of experience with wire harness, electrical and/or mechanical design Preferred Qualifications (Desired Skills/Experience): Experience with Aviation/Aerospace interiors 1+ years of experience in Computer aided design (CAD) tools Experience working in a cross-functional team environment Professional verbal and written communication skills Knowledge of CATIA V5 Ability to work hands-on with production and quality teams to resolve issues Knowledge of manufacturing processes and production floor support Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $91,800 - $124,200 Applications for this position will be accepted until Nov. 16, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for a Senior (Level 4) Structural Analysis Engineer for our Systems Stress team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Performs lead level “advise/assist/check” stress analysis responsibilities on Boeing 787 Aircraft Systems Commodities. Performs stress analysis using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods. Reviews and provides lead signature for Boeing technical oversight of supplier documents including engineering drawings, analysis, test plans, procedures, and reports. Leads development, integration and documentation of structural requirements to establish the Airplane Systems Commodity designs. Coordinates with other engineering groups to establish the product's environment such as load cases, interface architecture, and interface loads. Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Active leader in the growth of a new organization performing lead level duties, mentorship, and training of developing team members. Develops certification related documentation to support CFR Part 25 Type Cert projects. Collaborates and performs oversight on projects with domestic or international partners/suppliers. Applies Part 21 and Part 25 Code of Federal Regulations knowledge and facilitates interactions with Federal Regulators Works under minimal direction. Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 9+ years of related work experience or an equivalent combination of education and experience 5+ years of experience performing stress analysis on airplane systems or related structures 3+ years of experience performing classical hand analysis methods using industry proven methods Prior experience with aircraft, heavy structures, hardware systems or interiors manufacturing/production systems Preferred Qualifications (Desired Skills/Experience): 7+ years of experience working on airplane systems structures Avionics, Electrical Equipment & Installation, Environment Control Systems, Flight Controls, Flight Deck, Fuel Systems, and Mechanical/Hydraulic Systems Experience leading the development and completion of certification related documentation Experience leading and/or providing oversight of structural test programs on airplane systems commodities Experience leading supplier technical oversight and collaborating with suppliers to solve technical challenges Current or prior DER/AR/E-UM Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: (Senior-Level 4) 126,650-171,350 Applications for this position will be accepted until Nov. 27, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airlines (BCA), SWI (Seat Wire Integration) Electrical Design organization has an exciting opportunity for a Mid-Level Wiring Design and Installation Engineer (Level 3) in North Charleston, SC to help us define the future of commercial aerospace with innovative ideas that advance our culture of safety and quality that our customers, the flying public, expect. Position Responsibilities: You will be responsible for developing and maintaining electrical product detail, assembly and installation designs (e.g., cable routing and geometry, brackets) for our diverse portfolio of advanced Commercial Aircraft. Our greatest current need involves developing and maintaining critical electrical cable/wire harness installation, detail and assembly designs. This includes defining the physical routing layout of wire routing throughout the airplane. You must take into account such requirements as wire supports and brackets, separation to maintain physical and functional safety, proper parts selection, as well as environmental impacts on the many parts that make up the system of wire harnesses. All while ensuring that Safety and Quality are the number 1 priority. You will also develop and analyze engineering design disposition on discrepancies (e.g., rejection tags, production action requests and shop revision requests). This often involves working closely and collaborating with our partners on the factory floor to ensure our designs can be built efficiently and safely. You will follow and look for improvements to documented processes, specifications and procedures that support safe and quality design and manufacture of electrical commodities. You will develop basic statements of work. Also, participate in technical reviews of supplier capabilities to facilitate source selection. You will analyze functional and physical requirements to assure the development of integrated designs and system architecture. Actively supporting critical analysis and design reviews. You will work with and under general supervision of a lead engineer and an experienced mentor to enhance both your technical learning and career growth. This role will focus heavily on 787 seats and interiors This position is expected to be 100% onsite. The selected candidate will be required to work onsite in North Charleston, South Carolina. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 4+ years of experience with wire harness, electrical and/or mechanical design Preferred Qualifications (Desired Skills/Experience): Experience with Aviation/Aerospace interiors 3+ years of experience in Computer aided design (CAD) tools Experience working in a cross functional team environment Verbal and written communication skills Knowledge of CATIA V5 Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $112,200 - $151,800 Applications for this position will be accepted until Nov. 16, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is hiring for Mid-Level Propulsion System Integration Engineers to join our Propulsion 787 Program Engineering team in North Charleston, SC. We are building a new engineering team focused on main engine integration, APU, and fuels systems, directly supporting 787 production and deliveries. These roles are focused on system integration of the engine, APU, fuel system, performing installation analysis and certification deliverables, and providing hands on factory/delivery support. You’ll work across disciplines and with suppliers to keep 787 deliveries on schedule, resolve complex integration problems, meet customer commitments, and advance the safety, quality, and continued airworthiness of our products. You’ll work in a collaborative, multidisciplinary, agile environment using modern tools and practices, with strong opportunities for technical development and potential for leadership growth. If this vision and mission responsibility resonates with you, apply and join our Boeing South Carolina team of Propulsion System Integration Engineers today! Primary Responsibilities: Perform detailed propulsion system, engine, APU, and fuel system integration and installation analyses to ensure safe, maintainable, and certifiable installations across airframe and propulsion interfaces (pylon, mount, nacelle, ducts, fuel/oil/hydraulic system, electrical, and control & indication systems) Produce, review, and maintain engineering deliverables that preserve the certification basis and continued airworthiness of our aircraft Support qualification and demonstration testing (structural, thermal, vibration, endurance, fuel-system functional and leak testing); analyze test data and develop timely technical dispositions Troubleshoot production-line and delivery issues on-site in Charleston: support production holds, pre-delivery inspections, and delivery acceptance Investigate and resolve fleet/production/supplier issues (Service Requests, Non‑Conformances, Change Notices, etc.) to maintain flow and schedules Maintain and update configuration and requirements artifacts (specs, installation requirements, control documents) Support safety and airworthiness activities: update system safety analyses, installation limitations, and airworthiness requirements related to propulsion and fuel systems as needed Operate under lead level supervision, work in a team/collaborative environment, and independently drive technical workflows to completion Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 5+ years of relevant work experience Preferred Qualifications (Desired Skills/Experience): 3+ years of experience in propulsion engineering or engine/APU and fuel system integration Demonstrated ability to analyze complex cross-domain problems (structures, systems, certification) and produce implementable solutions Experience with configuration management and requirements artifacts (ENOVIA, CSDT, REDARS, ETAC, IVX/IVT, CATIA or similar tools) Experience with supplier oversight, supplier drawing reviews, and managing supplier-initiated design modifications Experience planning and executing qualification testing and developing test procedures/reports Knowledge of RCCA/BPSM, fault trees, cause-mapping, and safety analyses Excellent written and verbal communication; able to convey complex technical issues to multiple audiences Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $112,200 - $151,800 Applications for this position will be accepted until Nov. 20, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is seeking a Flight Controls Mechanical Hydraulics Design & Analysis Engineer (Experienced or Senior) to join our 787 Flight Controls Mechanical Hydraulics Engineering team located in North Charleston, South Carolina. The Flight Controls Mechanical Hydraulics Design & Analysis Engineer will support the development of one of the following sub-teams within the Flight Controls Mechanical Hydraulics team: Primary Flight Control Systems, High Lift Systems, Flight Control Electronics, Hydraulic Systems, Landing Gear Actuation and Steering Systems, Brake Control Systems. This requisition is seeking accomplished, self-motivated mid-career and senior engineers to design, analyze, test, certify, and support flight control and mechanical hydraulic systems and components (e.g. mechanical and hydraulic actuators [linear and rotary], electro-mechanical valves, hydraulic valves, sensors [LVDTs, RVDTs, Resolvers], gearboxes, torque tubes, electronic control units, and more) for the 787 family of aircraft as well as to support the production and fleet operations of this equipment. This requisition is for multiple positions in multiple flight control and mechanical hydraulic disciplines performing many of the tasks listed below. Flight Controls Mechanical Hydraulics Design & Analysis Engineer should be able to establish hand-calculations to spot-check computational analysis, perform multi-variable engineering analysis, develop test procedures to validate analysis tools, and develop Systems/Components interface requirements. In addition, candidates should have clear communication skills for reporting progress to a wide audience, the ability to develop a set of project goals and objectives, develop a project schedule, maintain and execute engineering on time. Strong candidates should have technical knowledge in one or more of the following areas: system controls, mechanical systems, electrical systems, systems modeling, Electro-mechanical actuation, thermodynamics and fluid dynamics, aircraft certification, experience with model correlation from data to analysis tools, and experience with Cameo, Matlab/Simulink, Scripting code (Matlab, C ++, Python), and/or experience with physical modeling tools such as Easy5, Adams, or Simscape. Position Responsibilities: Resolves airplane level requirements into system level requirements and resolve system level requirements into component requirements with time and cost-efficient validation methods. Participates in and lead system, component, and detail design efforts with thorough documentation within schedule and cost constraints to create error free, readily manufactured system and component specifications and drawings. Participates in and lead system level and component level validation analysis and testing, including plan creation; system and component test rigs; test monitoring; analysis and test report authoring; supplier test report review and approval; test failure analysis; and test failure mitigation. Participates in and lead system, component, and detail certification efforts, including creation of required certification artifacts, such as, system safety analysis, failure modes and effects analysis, and fault tree analysis; confirming and demonstrating traceability to regulatory requirements; and resolution of regulation conflicts. Supports on-going production efforts including timely resolution of build problems at Boeing and supplier manufacturing facilities; identifying and implementing design improvements to build accuracy, build rate, and production line safety; and timely resolution of rejections, functional test failures and flight squawks. Supports global fleet operations including subject matter expert consultation for airline and regulator queries; participate in and lead resolution efforts to resolve Service Related Problems (SRP); and analyze reported flight incidents to provide recommendations to the Safety Review Board (SRB) for Continued Operational Safety Program (COSP) determinations. Generally, these activities require successful cross-functional coordination within and outside of Boeing including with: manufacturing, avionics, crew-ops, airplane safety, aerodynamics, supply chain management, BCA systems software, suppliers, airline customers, and regulatory agencies. Gathers, defines and documents system level requirements to support flight control and mechanical hydraulic requirements definition. Resolves requirement conflicts. Performs and documents analysis and design of mechanical systems to validate or assess the system design or models. Develops solutions and disposition of issues to assure customer satisfaction. Develops system and subsystem architecture alternatives to meet requirements and objectives. Analyzes and compare alternatives (trade study) to rapidly converge on preferred configurations including defining and executing system simulations and development test programs. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences). Level 3: 5 or more years' related work experience or an equivalent combination of education and experience. 3+ years of professional experience working in an engineering field. Ability to travel domestically and internationally 10%. Preferred Qualifications (Desired Skills/Experience): Level 4: 9 or more years' related work experience or an equivalent combination of education and experience. Level 3/4 - Experience mentoring and developing others. 3+ years of experience in Mechanical, Electrical, and/or Hydraulic systems. 5+ years of experience in aerospace related role. 5+ years of experience working in 3D visualization toolsets. 5+ years of experience with component/system/airplane FAA/EASA certification. 5+ years of experience reading and interpreting engineering drawings, procedures, and specifications. 5+ years of experience in Flight Controls or Mechanical Hydraulic systems engineering roles. 5+ years of demonstrated project management skills. Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Experienced (Level 3): $103,700 - $140,300 Senior (Level 4): $126,650 - $171,350 Additional Information: All information provided will be checked and may be verified. Applications for this position will be accepted until Nov. 21, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for a Mid-Level (Level 3) Structural Analysis Engineer for our Systems Stress team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Perform stress analysis on Boeing 787 Aircraft Systems Commodities using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods. Reviews supplier documents in support of supplier technical oversight including engineering drawings, analysis, test plans, procedures, and reports. Develops, integrates and documents structural requirements to establish the Airplane Systems Commodity designs. Coordinates with other engineering groups to establish the product's environment such as load cases, interface architecture, and interface loads. Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance. Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by investigating failures and analyzing improvements. Develops certification related documentation to support CFR Part 25 Type Cert projects. Collaborates and performs oversight on projects with international partners/suppliers. Actively supports the growth and development of a new engineering organization. Works under general direction. Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 5+ years of related work experience or an equivalent combination of education and experience 3+ years of experience performing stress analysis on airplane systems or related structures 1+ years of experience performing classical hand analysis methods using industry proven methods Prior experience with manufacturing/production systems Preferred Qualifications (Desired Skills/Experience): 5+ years of experience working on airplane systems structures such as Avionics, Electrical Equipment & Installation, Environment Control Systems, Flight Controls, Flight Deck, Fuel Systems, and Mechanical/Hydraulic Systems Experience developing certification related documentation Experience developing test plans/procedures or leading test execution Experience supporting technical oversight of component test programs Part 21 and Part 25 Code of Federal Regulations knowledge and experience interacting with Federal Regulators Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This role is for 1st shift, however, there may be additional shift requirements to support program objectives Pay Range Summary: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Experienced (Level 3): $103,700 – $140,300 Applications for this position will be accepted until Nov. 30, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is hiring for Airplane Electronic Engineer (SME) to join the 787 Electronic Systems (Avionics, Integrated Modular Avionics, Network Systems, & Electrical Subsystems) team located in North Charleston, South Carolina. As a member of the Electronic Systems team at BSC, you will develop and support these systems and their components in a sustaining production environment. Project examples include addressing design obsolescence, developing product improvements, supporting production build and test, supporting new customer introduction, and supporting the in-service fleet. Position Responsibilities: • Leads work with customers to develop and document complex electronic and electrical system requirements., • Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications., • Leads work to test and validate to ensure system designs meet operational and functional requirements., • Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle., • Researches technology advances for potential application to company business needs., • Makes recommendations for technology investments. Basic Qualifications (Required Skills/Experience): • Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement, • 14 or more years' related work experience or an equivalent combination of education and experience Preferred Qualifications (Desired Skills/Experience): • Experience with DO-254 Airborne Electronic Hardware Development & Qualification, • Experience with DO-297 Integrated Modular Avionics Development & Qualification, • Experience with ARP-4754 Systems Development & Qualification, • Experience with DO-178 Airborne Software Development & Qualification, • Engineering Requirement definition / verification, • Commercial Aerospace certification experience, • Experience w/ ARINC 429 & 664, • Successful track record of mentorship and formal/informal leadership Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range SME (Level 5): $164,900 - $223,100 Applications for this position will be accepted until Nov. 21, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Join BoldAge PACE and Make a Difference! Why work with us? • A People First Environment: We make what is important to those we serve important to us., • Make an Impact: Enhance the quality of life for seniors., • Professional Growth: Access to training and career development. Competitive Compensation: • Medical/Dental, • Generous Paid Time Off, • 401K with Match*, • Life Insurance, • Tuition Reimbursement, • Flexible Spending Account, • Employee Assistance Program BE PART OF OUR MISSION! Are you passionate about helping older adults live meaningful, independent lives at home with grace and dignity? BoldAge PACE is an all-inclusive program of care, personalized to meet the individual health and well-being needs of our participants. Our approach is simple: We listen to our participants and their caregivers to truly understand their needs and desires. Physical Therapist Assistant SUMMARY: The Physical Therapist Assistant (PTA) at BoldAge PACE works under the supervision of a licensed Physical Therapist to deliver high-quality patient care and support the interdisciplinary team. Responsibilities include based on individual state scope of practice- implementing and modifying treatment plans, educating participants and their families, maintaining accurate documentation, and managing a caseload. The PTA actively participates in patient conferences, agency in-services, and quality improvement initiatives. Additional duties involve assisting with student and intern supervision of a Physical Therapy Assistant, scheduling, and contributing to discipline-specific projects such as chart audits and peer reviews. This role is integral to providing direct, person-centered care that aligns with BoldAge PACE’s mission and values. ESSESNTIAL DUTIES AND RESPONSIBILITIES: • Implement physical therapy treatment plans under the supervision of a physical therapist., • Assist patients with exercises, mobility training, and therapeutic interventions such as heat, cold, or electrical stimulation., • Monitor participant performance, adjust treatments within scope, and communicate progress or challenges to the supervising physical therapist., • Teach participants to use assistive devices and educate them and their families on home exercises, safety, injury prevention, and post-treatment care to empower independence., • Document therapy sessions, outcomes, and report changes in participant condition or adverse reactions., • Maintain therapy equipment, ensure a clean and safe environment, and adhere to safety protocols and infection control procedures., • Contribute to treatment plan adjustments, participate in staff meetings, and assist with equipment and supply management., • Provide support with participant transfers., • Act within the legal scope of practice and uphold ethical and professional care standards., • Perform additional duties as assigned. PRE-EMPLOYMENT REQUIREMENTS: • Must have reliable transportation, a valid driver's license, and the minimum state required liability auto insurance., • Be medically cleared for communicable diseases and have all immunizations up to date before engaging in direct participant contact., • Pass a comprehensive criminal background check that may include, but is not limited to, federal and state Medicare/Medicaid exclusion lists, criminal history, education verification, license verification, reference check, and drug screen. EDUCATION AND EXPERIENCE: • Associate of Arts Degree from a Physical Therapy Assistant program accredited by the Commission on Accreditation on Physical Therapy Education (CAPTE), • Current state license, or eligibility for licensure, • One year’s experience as a PTA preferred, • 1 year of experience working with a frail or elderly population preferred. If this is not present, training will be provided upon hiring. SKILLS AND ABILITIES: • Work effectively with patients, families, staff, and external agencies, including emotionally or physically challenging situations., • Deliver participant-centered therapy treatments under supervision, prioritizing care and demonstrating a People First philosophy., • Maintain accurate, compliant medical records and manage caseloads efficiently while exceeding care expectations., • Demonstrate familiarity with therapy equipment and EHR systems to ensure effective and smooth care delivery., • Build rapport to motivate participants, ensuring a safe and supportive therapy environment., • Mentor students or interns, fostering professional growth aligned with BoldAge PACE values., • Follow treatment plans precisely, ensuring compliance with regulations, and travel as required. BoldAge PACE provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. • Match begins after one year of employment Full- Time Monday- Friday 8am-4:30pm Full- Time

Logistics at full potential. At GXO, we’re constantly looking for talented individuals at all levels who can deliver the caliber of service our company requires. You know that a positive work environment creates happy employees, which boosts productivity and dedication. On our team, you’ll have the support to excel at work and the resources to build a career you can be proud of. Day Shift, Monday - Friday, 6:30am - 3:30pm As the Maintenance Technician, you will perform highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance processes. If you have the skills required for this role and a passion for keeping facilities and equipment in top-notch shape to ensure operations run safely and smoothly, consider joining GXO! Pay, benefits and more. We are eager to attract the best, so we offer competitive compensation and a generous benefits package, including full health insurance (medical, dental and vision), 401(k), life insurance, disability and more. What you’ll do on a typical day: • Maintain Chucks, 6 River mobile pick units, etc., • Repair and maintain a wide variety of equipment associated with the facility, • Maintain firm knowledge of plant layout and stay on top of current company policies as they relate to safety, environmental issues, etc., • Maintain facilities infrastructure and equipment in various areas, including skilled carpentry, electrical, painting, plastering, dry walling, plumbing, heating, air conditioning and mechanical work; coordinate and schedule third-party service providers as needed, • Perform advanced level plumbing work, including installing, repairing and replacing plumbing fixtures and clearing obstructions from water and sewer lines, • Assist in the implementation of new processes and equipment as they are brought into the company, • Process products that require testing and mechanical evaluation, • Complete all cosmetic repairs to restore products to sellable conditions, • Perform scheduled routine machine maintenance, including disassembling, cleaning and inspecting machine mechanical, pneumatic, hydraulic, low-voltage electrical and coolant systems, • Complete necessary preventive maintenance in a timely manner; document preventive maintenance, equipment repair, part usages, etc. What you need to succeed at GXO: At a minimum, you’ll need: • Knowledge of and experience reading simple electrical, mechanical and pneumatic drawings, • Microsoft Office experience, • Experience with Microsoft Office It’d be great if you also have: • Associate or bachelor’s degree, specialized vocational training or equivalent education and experience in product maintenance, • Active Journeyman license, • 2 years of facility maintenance experience; strong hydraulic, pneumatic, mechanical and industrial skills, • Experience with tools and equipment used in building maintenance, reconstruction and repair work, • Experience using drawings, manuals and diagrams to coordinate and complete installation of equipment and components according to specifications, • Excellent communication skills with managers, employees and vendors while delivering status reports and performing maintenance and repair work, machinery installations or moves This job requires the ability to: • Lift up to 50 lbs. above the waist and carry heavy objects, • Safely walk and stand for extended periods of time on various surfaces that may be uneven or slippery, • Reach (including above your head), bend, climb, push, pull, twist, squat and kneel, • Access any area of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under parts of the equipment, • Safely and effectively operate lift trucks and manual lifting equipment in the process of installing, modifying or repairing industrial equipment We engineer faster, smarter, leaner supply chains. GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. We are proud to be an Equal Opportunity employer including Disabled/Veterans. GXO adheres to CDC, OSHA and state and local requirements regarding COVID safety. All employees and visitors are expected to comply with GXO policies which are in place to safeguard our employees and customers. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement _ #appcastrequest

Job Description Mechanic Main Industries, Inc. Description: Main Industries has been serving the marine and industrial market for over 40 years. Beginning as a marine coatings company, Main has grown into a multi-craft industry leader. Main now specializes in marine and industrial coatings as well as a variety of marine and industrial scaffolding. Main is hiring for a full-time Mechanic at our Charleston, SC location: Main is seeking a full-time Mechanic; experience with both gasoline and diesel engines, hydraulic systems and forklifts. Must have the ability to properly diagnose and repair problems from start to finish, on all aspects of a variety of vehicles. EPA 609 MVAC Certification is desirable. Job Type: Full-time, hourly, Weekdays Required experience: Five years (5) verified experience as a mechanic. • Forklift training/certification a plus (additional training will be required once hired for those using a forklift), • Understand and carry out verbal directions given by a supervisor as well as perform with minimal supervision, • Must be proficient in the use of basic electrical meters and test equipment, • High Level of critical thinking and troubleshooting ability, • Understand and obey all posted warning, caution, notification and/or hazards signs posted on a job site, • All candidates must submit to drug testing and E-Verification of their right to work in the US, • Reliable transportation a must, • Adherence to Safety and Quality Standards are a must No overtime is guaranteed, but some projects do require overtime. This could be more than 40 hours during the normal Monday through Friday work week. Benefits: In addition to competitive pay, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with Main. Benefits subject to employment eligibility. • Paid Time Off, • Health insurance, • Life insurance, • Dental and vision plan, • 401(k) savings plan Main Industries is an Equal Opportunity Employer (EOE) Job Posted by ApplicantPro

Job Description Trailer Mechanic Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for DOT inspection certified mechanic with experience working on trailers, tanks or chassis for our N. Charleston South Carolina Address: 2653 Veneer Avenue, North Charleston, SC 29405 Shift Hours: Monday through Friday, 7:30AM to 4:30PM Pay Range: $24.00 to $30.00 per hour - dependent on experience. Skill-based pay rate reviews and potential increases every 6 months. Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a tank trailer., • Tank service and repair, • Trailer suspension installation and repair, • Experience with air brake systems and repairs, • TIG aluminum, stainless or carbon welding experience (optional), • Ability to effectively and efficiently inspect tanks and trailers to align with DOT standards (HM183, hazmat) Physical Demands: • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Must be able to work in confined spaces DCI Benefits: • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description Hughes Motors Isuzu Trucks of Charleston, South Carolina is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job Description Overview Diesel Technician/Mechanic – North Charleston, SC $38.00 - $40.00 hr | Weekly Pay | Full Benefits within 30 Days Amerit Fleet Solutions, a leader in fleet maintenance across the U.S., is hiring a skilled Diesel Technician/Mechanic to join our team in North Charleston, SC. If you enjoy troubleshooting mechanical issues and keeping fleet vehicles running reliably, this is a great opportunity to grow your career with a stable national company. Pay & Schedule Pay: $38.00 – $40.00/hour (based on experience) Pay Frequency: Weekly pay – every Friday Schedule: Sunday - Thursday 3:00pm - 11:00pm Why Technicians Choose Amerit ✔ Weekly Pay – Reliable paycheck every Friday ✔ Benefits Start Fast – Medical, dental, vision within 30 days ✔ 401(k) Match – Plan for your future ✔ Paid Time Off – Vacation, holidays, and sick time ✔ Boot Allowance & Safety Gear Reimbursement ✔ Training Through Amerit University ✔ ASE Certification Reimbursement & Bonuses ✔ Employee Referral Bonuses (Up to $500) ✔ Career Advancement Opportunities Nationwide What You’ll Do • Perform preventive maintenance and repairs on medium to heavy duty fleet vehicles, • Diagnose mechanical and electrical issues, • Conduct inspections to ensure vehicles meet safety and compliance standards, • Accurately document repairs and complete work orders, • Maintain a clean and organized work area, including your tools and equipment, • Follow all safety procedures and company policies, • Collaborate with supervisors and team members to support fleet operations What We’re Looking For • 5+ years’ of hands-on experience performing diesel vehicle maintenance and repairs, • Strong diagnostic and troubleshooting skills, • Valid driver’s license, • Ability to own and maintain the personal tools and toolbox required for the role, • Ability to work effectively both independently and as part of a team, • Willingness and ability to meet the physical demands of the position (detailed below), • Must be eligible to pass standard pre-employment screenings, including drug screen and DOT physical (if required) Working Conditions This role involves working in a mobile, outside and/or shop environment with exposure to dust, diesel fumes, noise, and mechanical materials such as oils and greases. Technicians must be able to perform essential job functions that include frequent movement such as standing, walking, climbing, bending, and sitting for extended periods, as well as lifting heavy objects and accessing tight or confined spaces. This position requires regular use of hands to grasp, reach, handle, and operate tools and equipment. Technicians may be required to work at heights using ladders or elevated platforms and must be able to safely perform duties in various weather conditions. Due to the active work environment and movement of large vehicles, the ability to see and hear sufficiently to safely navigate the workspace is required. Reasonable accommodations may be made to support individuals with disabilities in performing essential job functions. Ready to Join a Growing Team? Apply today to join Amerit Fleet Solutions and build a career with a company that values safety, reliability, and skilled technicians. https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #DieselMechanic #NowHiring #DieselTechnicianCareer #MechanicJobs #DieselTechnician INDKC

Job Description Location: Charleston, SC - Field-Based (North Charleston / Ladson / Summerville industrial corridor) Service Area: Charleston metro, including the Port of Charleston, I-26/I-526 logistics corridor, and surrounding distribution, manufacturing, and industrial hubs Reports To: Business Owner Employment Type: Full-Time Compensation: $30.00–$40.00/hour based on experience and qualifications, plus a performance incentive plan (detailed separately) tied to customer satisfaction, efficiency, and territory growth Pay Structure: Stable hourly pay - no flat rate - with incentive bonuses layered on top. Position Summary DuraFleet is looking for an experienced Lead Mobile Diesel Technician to provide maintenance and repair services for commercial fleet customers throughout the Charleston metro. This is an opportunity to help build a new territory backed by an established and expanding mobile fleet service brand. The ideal candidate is a skilled, dependable technician who can diagnose problems accurately, complete quality repairs in the field, communicate professionally with customers, and document work thoroughly. Charleston's industrial base - the Port, the I-26 corridor, the manufacturing and distribution operations stacked along I-526 - runs on diesel equipment that can't afford downtime. DuraFleet exists to fix that: fast, honest, professional mobile service that keeps fleets moving. We're building a reputation on fairness and 5-star service, not on flat-rate games or upsells. The person we hire for this role sets that tone from day one. Key Responsibilities Hands-on technical work: • Perform preventive maintenance, inspections, diagnostics, and repairs on commercial fleet vehicles, • Diagnose diesel engine, electrical, brake, steering, suspension, drivetrain, and related system concerns, • Use diagnostic equipment, multimeters, service information, and sound troubleshooting practices across light-, medium-, and heavy-duty equipment, • Complete mobile repairs at customer facilities, fleet yards, and roadside locations throughout the Charleston metro, • Conduct thorough vehicle inspections and flag safety or maintenance concerns before they become breakdowns, • Maintain accurate digital work orders - labor, parts, notes, inspections, and photos, • Keep your service vehicle, tools, and equipment organized and road-ready As the Charleston operation grows: • Help establish strong service standards for future DuraFleet Charleston technicians, • May participate in interviewing and evaluating candidates as DuraFleet hires additional technicians, • May mentor and train other technicians on diagnostics, repair quality, and customer communication, • Coordinate with the Business Owner on parts, approvals, pricing conversations, and job planning, • Represent DuraFleet professionally with fleet customers - clear communication, honest recommendations, no surprises, • Deliver excellent customer service on every call, every time - this is how DuraFleet builds its reputation Required Qualifications • At least three years of commercial vehicle, diesel, fleet, or heavy-equipment maintenance experience, • Strong independent diagnostic and mechanical troubleshooting ability - comfortable being the only technician on site, • Experience with preventive maintenance, electrical systems, brakes, steering, and suspension across a range of equipment, from light-duty up to heavy-duty, • Confidence with electronic diagnostic tools and OEM/aftermarket service software, • Ability to complete accurate digital documentation using cloud-based service systems, • Professional communication and customer service skills - you're often the only DuraFleet representative a customer sees, • Valid driver's license and a driving record acceptable under company insurance requirements, • Ability to travel throughout the Charleston metro service area, • Ability to perform the physical requirements of the position, with or without reasonable accommodation, • A suitable place to park and secure a company service truck at your residence Plus Qualifications • ASE Medium/Heavy Truck certifications, • Class A or B Commercial Driver's License, • Qualified commercial vehicle or brake inspector credentials, • Experience with air brakes, trailers, hydraulics, liftgates, welding, or fabrication, • Experience with Shop Monkey or similar fleet maintenance/shop-management software, • EPA refrigerant certification for servicing reefer/transport refrigeration units, • Prior experience mentoring, training, or leading other technicians, • Previous mobile service or roadside repair experience What Success Looks Like • Vehicles are diagnosed accurately and repaired correctly the first time, • Customers consistently rate DuraFleet 5 stars and call us before they call anyone else, • Work orders are complete, timely, and well documented, • Safety requirements and service procedures are consistently followed, • Customer downtime is reduced, visit after visit Your Service Truck You'll be assigned a fully equipped DuraFleet mobile service truck, which you keep at your home between shifts. You start and end your workday from home rather than commuting to a shop first - the truck is your rolling workspace for the territory. Work Environment This is a field-based position serving the Charleston metro and surrounding market - customer facilities, distribution centers, fleet yards, roadside locations, and other commercial operating environments. Occasional schedule flexibility may be needed for urgent customer service requests. Why Join DuraFleet DuraFleet is backed by an established, expanding mobile fleet service brand, opening a new territory in one of Charleston's most active industrial and logistics corridors. Charleston's fleet and logistics scene is only getting busier, and DuraFleet intends to be the name every fleet manager in the metro trusts first. You'll help build that reputation from the start. If you're tired of flat-rate pressure, shop politics, or being just another number, this is a chance to help build something fair, professional, and genuinely good - and to be rewarded for it. DuraFleet is an equal opportunity employer. Employment decisions are based on qualifications, experience, performance, and business needs.

Job DescriptionDescription: About Capital Waste Services At Capital Waste Services (CWS), we are committed to delivering reliable, customer-focused waste collection services across our communities. Our team members are the foundation of our success, and we pride ourselves on fostering a supportive, high-integrity work environment where people can grow and thrive. POSITION SUMMARY: Maintenance Technician will support repairs and preventive maintenance on new and existing trucks. MINIMUM REQUIREMENTS: Education: High school diploma or general education degree (GED) desired but not required. • A minimum of at least 2 years of vehicle/hydraulic maintenance experience is required position along with a high school diploma or GED., • Valid state driver’s license preferred but not required., • Must pass criminal background check PRIMARY DUTIES AND RESPONSIBILITIES: This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. • support repairs and preventive maintenance (assembly, disassembly and/or repair of lubrication systems, cooling systems, basic electrical wiring and hydraulic systems, changing filters on new and existing Trucks for our Residential & Commercial locations. WORK ENVIRONMENT: Exposed to unpleasant sights and smells. The unavoidable, externally imposed conditions under which the work must be performed, and which create hardship including the frequency and duration of occurrence of physical demands, environmental conditions, demands on one’s senses and mental demands. TYPICAL PHYSICAL DEMANDS: • Must be able to stand, walk, bend, reach and lift., • Must be able to use hands and fingers, kneel, crawl, talk, hear, climb and balance., • Visual requirements include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Ability to manually lift/move up to 65 pounds regularly, • Ability to manually push/move up to 100 pounds with assistance from another employee Requirements: MINIMUM REQUIREMENTS: Education: High school diploma or general education degree (GED) desired but not required. • A minimum of at least 2 years of vehicle/hydraulic maintenance experience is required position along with a high school diploma or GED., • Valid state driver’s license preferred but not required., • Must pass criminal background check

Job DescriptionDescription: Job Summary The Fleet Mechanic is responsible for the preventative maintenance, repair, and service of the company’s vehicles and landscaping equipment. This role ensures that all machinery and equipment are operational, safe, and efficient, supporting the smooth functioning of landscaping operations. The mechanic will diagnose issues, perform preventative maintenance, and repair various types of landscaping equipment, including mowers, trimmers, blowers, skid steers, carts and vehicles. The individual must be proficient with mechanical and technical skills, have good problem-solving skills and good communication skills for interacting with team members. This position reports directly to the Fleet Manager and works closely with Fleet Shop Manager, the crew leaders and branch team. Core Values • Culture of Safety – Safety is always job #1, • A Growing Tradition Plants, Personally, Financially and Professionally, • Employee Owned – Personal Pride in Success with an Owners Mentality, • Exceptional Customer Experience – Delighting our Clients with our Products and Services, • Good Neighbors – Community Pride – Sharing our Success, • Respectability – Treating Others as we want to be treated Duties/ Responsibilities • Follow safety rules and regulations, • Perform preventative maintenance such as oil changes, tire changes and other vehicle services, • Complete basic work service orders, sharpen blades, replace string lines and filters, • Repair vehicles, trailers, carts and equipment correctly, safely, and efficiently, • Evaluate the return and condition of landscape equipment, making repair recommendations, • Ensure equipment is clean, properly maintained and in good working order, • Provide updates, recommendations, and regular communication to Shop Manager and Fleet Manager, • Maintain service records with accurate documentation for all work performed on each unit, • Keep work area and shop common areas clean and organized, • Excellent written and verbal communication skills, • Ability to perform basic repairs and required maintenance using special tools and equipment following Technical Manual procedures, • Perform other duties as assigned Requirements: Education and Experience • High school graduate or equivalent desired, • 1+ Years of experience performing service repairs, • 1+ Years of experience as a Small Engine Mechanic or Small Engine Technician, • Excellent interpersonal and communication skills a must, • Must possess a current Class C Driver’s License with clean MVR records, • Ability to read and write the English language, • Bilingual (Spanish/English) a plus but not required, • Proficient knowledge of mechanical, electrical, and hydraulic systems used in the repair of landscape equipment Physical Requirements • Have full range of mobility in upper and lower body, • Be able to reach overhead, • Be able to work in various positions, including, but not limited to, standing, bending over, sitting, kneeling, and squatting for extended periods of time, • Be able to pull and push materials and equipment to complete assigned job tasks, • Be able to lift 75 pounds., • Position may require extended work hours and flexibility in scheduling, • Travel to other locations in and out of state may be required and may include overnight stays, • This work may be performed outside in all sorts of weather conditions (i.e., hot, humid, cold, wet, windy, rain, snow) which means the person will need to be adequately prepared This Job Description is not a complete statement of all duties and responsibilities comprising the position. Job descriptions are not intended and do not create employment contracts.

Job Description Quality Repair Solutions (QRS®) is a comprehensive tractor and trailer repair and maintenance business that specializes in pressurized tankers. QRS ensures professional drivers get back on the road safely and quickly. We are looking for an energetic, reliable Trailer Mechanic to join our team in North Charleston, SC. We are a dynamic, stable and growing company. We have great long term career opportunities across our headquarters, trucking terminals, mechanic shops, depots, tank washes and other locations. If you want to join the industry leader and make a difference, please consider this opportunity and apply at QRSShops.com. Compensation and Incentives • Weekly Competitive Pay is $29 - $32/per hour, • Sign on Bonuses -, • Tool/Boot Reimbursement Program, • Referral Program, • Sign on Bonuses, • Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts, • Generous Paid Time Off/ Holiday Schedule, • Employer Matching 401KJob DetailsJob Summary: Responsible for diagnosing, repair, and perform preventative maintenance on semi-truck trailers and tractors, including tasks like brake adjustments, tire replacements, electrical troubleshooting, basic structural repairs, and more, all while working out of a service truck and adhering to strict safety regulations; general repairs on tractor and trailer units in accordance with DOT, federal and state regulations and company standards. Uses technical publications or automated systems in maintaining vehicles to prescribed manufacturers’ maintenance schedules and for researching parts. Properly annotates all maintenance and labor performed in maintenance management software. Duties and Responsibilities:, • Diagnose and repair tractors and trailers., • Perform annual/systematic 90 day inspections (trailers) on equipment as required., • Ensure equipment meets Federal FHWA standards., • Operate a yard hostler truck to move trailers within the facility yard and the shop as needed., • Able to identify parts and supplies as needed., • Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste., • Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety., • Using welding equipment., • Perform miscellaneous duties as assigned.Benefits, • Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts, • Basic Life/Voluntary Life, • Short Term and Long Term Disability, • Flexible Spending Account and Health Savings Account, • Employee Assistance Program, • 401k Match & Roth Retirement Savings Plan, • Weekly PayRequirementsSkills and Abilities:, • Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems., • Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.Education and Experience:, • High school diploma or equivalent, or equivalent vocational school required., • At least 1 year related experience required. Additional Job InformationPosition Type/Expected Hours of Work:, • This is a full-time position, and days and hours of work are Monday through Friday, hours depend on location.Company InformationWork Environment:, • The shop has a climate similar to outdoor weather. Frequent exposure to loud machinery, air tool operation, hammering and engine noise.Physical Demands:, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Ability to push, pull, or lift up to 75 lbs., • Able to fit into a 20” cargo trailer dome opening., • Able to meet safety standards for fall protection harness – max weight 310 lbs. (includes all PPE worn), • Use their hands to handle, control, or feel objects, tools, or controls., • Stand for long periods of time., • Walk for long periods of time., • Bend or twist their body., • See differences between colors, shades, and brightness. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Duties, responsibilities, and activities may change at any time with or without notice. Equal Employment Opportunities Quality Carriers, Inc. Provides equal employment opportunities to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Job DescriptionAUTO MECHANIC / AUTOMOTIVE TECHNICIAN — NORTH CHARLESTON, SCThis Shop Doesn’t Need Another “Wrench Turner.” They Want the Tech Who Owns the Bay. North Charleston drivers bring in everything — commuters, work trucks, family SUVs, and the occasional “it only makes the noise when it rains and I’m turning left uphill” mystery. This shop wants the technician who doesn’t get rattled, doesn’t guess, and doesn’t waste time. They want the tech who walks in, grabs the keys, and gets straight to the truth. And when you apply through CarGuys Inc. — America & Canada’s #1 Automotive Recruiter, you stay anonymous until you decide otherwise. Your profile goes directly to the hiring manager. No politics. No drama. What You’ll Be Doing • Real diagnostics — not partsswapping, • Repairs on domestic & import vehicles, • Maintenance, brakes, suspension, electrical, and engine work, • Keeping customers safe and their vehicles dependable, • Staying busy — this shop never runs out of workWhat You Bring, • Experience as an Automotive Technician, Auto Mechanic, or ASE Tech, • Ability to diagnose and repair modern vehicles accurately, • Pride in doing the job right the first time, • A teamoriented mindset, • Certifications are great, but not requiredWhat You Get, • Strong pay based on experience & skill, • A shop culture that respects technicians, • Updated tools, diagnostic equipment, and support, • A stable, reputable dealership group in North Charleston, • Real opportunities for advancementWhy Apply Through CarGuys Inc.?, • You stay anonymous — your info is protected, • We present you directly to the hiring manager, • Trusted by hundreds of dealerships across the U.S. & Canada, • A simple, fast, technicianfriendly processReady to Work Somewhere That Actually Gets It? Hit Apply and let CarGuys Inc. take it from here. Automotive Technician, Auto Mechanic, Mechanic, Automotive Tech, ASE Technician, Master Technician, Lube Technician, Auto Repair, Dealership Technician, Service Technician, Automotive Service Technician, Auto Shop, Automotive Repair, Diagnostics, Engine Repair, Brake Repair, Suspension, Electrical Diagnostics, Transmission, Automotive Jobs, Mechanic Jobs, Technician Jobs, Dealership Jobs, North Charleston Automotive Jobs, North Charleston Mechanic Jobs, CarGuys Inc, Automotive Recruiting, Auto Tech Careers, Flat Rate Technician, Import Technician, Domestic Technician, Automotive Service Department, Auto Maintenance, Vehicle Repair, Automotive Careers You are applying through Car Guy’s Inc, America’s and Canada’s #1 Automotive Recruiter. Companies all over America and Canada hire us to find them qualified candidates. If deemed a qualified candidate your resume will be forwarded to a local dealer.

Job Description Job Summary: A Diesel Technician is responsible for inspecting, diagnosing, repairing, and maintaining diesel-powered vehicles and equipment. This role ensures all machinery operates safely and efficiently, minimizing downtime and supporting operational productivity. Key Responsibilities: • Inspect, troubleshoot, and repair diesel engines, transmissions, brakes, and hydraulic systems., • Perform routine maintenance services such as oil changes, filter replacements, and fluid checks., • Diagnose mechanical, electrical, and electronic issues using diagnostic tools., • Maintain repair logs and service records accurately., • Ensure all repairs meet safety and quality standards., • Order necessary parts and maintain inventory as needed., • Adhere to company policies, safety guidelines, and industry regulations. Qualifications: • High school diploma or equivalent; technical certification or vocational training in diesel mechanics preferred., • Proven experience as a Diesel Mechanic or related role., • Strong knowledge of diesel engines, mechanical systems, and diagnostic equipment., • Ability to read technical manuals and schematics., • Physical ability to lift heavy parts and work in various conditions., • Valid driver’s license; CDL preferred. Preferred Skills: • Welding and fabrication experience., • Familiarity with computerized diagnostic systems., • Strong problem-solving and time management abilities. \nCompany Description Commercial truck dealership established in 1939 to serve the Lowcountry. We are a family owned and operated business providing quality jobs in an essential industry. Specializing in Mack Trucks, Volvo Trucks and Isuzu Commercial Trucks. The dealership provides new and used truck sales, parts and service. Commercial truck dealership established in 1939 to serve the Lowcountry. We are a family owned and operated business providing quality jobs in an essential industry. Specializing in Mack Trucks, Volvo Trucks and Isuzu Commercial Trucks. The dealership provides new and used truck sales, parts and service.

Job Description As part of the acquisition integration, you will continue in a role that supports our day-to-day operations while we bring our teams together. During this transition, you'll continue performing important work, and we'll take the time to get to know your skills, experience, and interests as we identify opportunities for your continued growth within the organization. Our goal is to make this process as smooth as possible, and we are committed to keeping you informed and providing updates as the integration progresses. Who we are: Party Reflections is a leading event rental industry provider in the Carolinas. The business started in 1958 and has been a family-operated business since day one. The most important piece to our success is our people. We strive to make great moments happen for both our clients and our employees. Fleet Diesel Mechanic Job Summary We are seeking a skilled and dependable Fleet Diesel Mechanic to perform preventive maintenance, diagnostics, inspections, and repairs on diesel trucks, trailers, and fleet vehicles. The ideal candidate will have strong troubleshooting abilities, experience working with mechanical and electrical systems, and a commitment to safety and quality service. Key Responsibilities • Perform preventive maintenance and scheduled inspections on diesel and gas vehicles and equipment., • Diagnose and repair mechanical, electrical, hydraulic, suspension, steering, brake, and fuel system issues., • Repair or replace engines, transmissions, brakes, tires, lighting systems, batteries, and other vehicle components., • Conduct diagnostic testing and interpret results to determine proper repairs., • Inspect and maintain air brake and hydraulic brake systems., • Service cooling, charging, cranking, driveline, clutch, and axle systems., • Perform tire inspections, balancing, mounting, rotations, and replacements., • Operate and inspect liftgates, cargo handling equipment, and coupling systems., • Complete oil changes, lubrication services, alignments, and fluid checks., • Road test vehicles to identify issues and verify completed repairs., • Respond to roadside service calls and emergency breakdowns as needed., • Communicate with customers regarding repair needs, maintenance recommendations, estimates, and scheduling., • Maintain accurate service records, inspection reports, and inventory documentation., • Utilize shop management software and electronic maintenance systems., • Follow all company safety policies and comply with DOT, federal, state, and local regulations., • Maintain a clean and organized work area., • Assist in training and mentoring junior technicians as needed., • Perform additional duties as assigned. Qualifications • High school diploma or GED preferred., • Previous experience as a diesel mechanic or heavy equipment technician., • Strong knowledge of diesel engines, electrical systems, brake systems, and vehicle diagnostics., • Ability to use diagnostic tools, hand tools, and repair equipment safely and effectively., • Ability to lift heavy equipment and work in various weather and shop conditions., • Valid driver’s license required; CDL preferred., • Strong problem-solving, communication, and customer service skills., • Ability to work independently and manage multiple tasks efficiently., • Ability to plan and coordinate work with manager and technicians., • Document all work, issues, repairs, parts and costs, following standard operating procedures. Preferred Skills • Experience with preventive maintenance programs., • Knowledge of DOT inspections and compliance requirements., • ASE certifications or manufacturer certifications are a plus., • Experience using electronic maintenance and shop management systems. Qualifications: • Must have basic math and counting skills, • Ability to work outside in all weather conditions., • Willingness to work with hands and labor intensive duties., • Lots of Enthusiasm, professionalism, and commitment., • Great customer service skills, • Flexible schedule., • Reliable Transportation, • Must be able to follow instructions and operational standards.

Job Description Job Posting TitleDiesel Technician Job Description Job Posting Title Diesel Technician Job Description Diesel Technician Job Description: • Perform quality repairs and maintenance on medium and heavy-duty trucks and diesel engines in accordance with manufacturer specifications and industry standards, • Complete routine maintenance including oil changes, battery checks, lubrication, and inspections, • Diagnose mechanical and electrical issues using current diagnostic software, • Conduct preventive maintenance inspections and correct vehicle deficiencies, • Perform adjustments, alignments, and road tests as needed, • Accurately document all repairs, inspections, and work orders, including state and emissions-related paperwork, • Organize and prioritize work to ensure efficiency, productivity, and safety, • Complete additional projects or duties as assigned by the supervisor Diesel Technician Requirements: • 5+ years of hands-on diesel technician experience (Level A Technician), • Strong knowledge of diesel diagnostic and repair systems, • Experience using modern diagnostic software, • CDL preferred or willingness to obtain, • High attention to detail with strong documentation skills, • Dependable, safety-focused, and team-oriented Why Work with Carolina International Trucks? • Weekly pay, • Paid holidays, vacation, and personal days, • Comprehensive benefits package (medical, dental, vision), • 401(k) with company match, • Multiple incentive plans in addition to base pay, • Tool Certification Program, • Paid training and ongoing development, • Stable employment with a well-established company, • Clear paths for growth and advancement At Carolina International Trucks, our commitment to excellence has grown our company to 6 locations in South Carolina. With locations in Columbia, Charleston, Conway Florence, Greenville, and Greer, we have a presence covering the entire state to give our customers unmatched customer service. We look forward to providing the same great service to you as a valued member of Carolina International Trucks Team. Carolina International Trucks is an equal-opportunity employer and values diversity. We encourage all qualified candidates to apply.

Job Description About GCT Chauffeured Services GCT Chauffeured Services is a rapidly growing provider of premier chauffeured transportation solutions catering to corporate America, including contract shuttle services, minibuses, and motor coaches for group transportation. We specialize in delivering luxury, reliability, and unparalleled customer service to our clients. As we continue to expand, we are seeking passionate, detail-oriented, and service-driven individuals to join our dynamic team. Job Description The Fleet Mechanic is responsible for overseeing all aspects of vehicle maintenance, repair, and compliance across GCT’s transportation systems, supporting a 45+ shuttle and executive luxury operation. This role ensures vehicle safety, reliability, and full DOT/FMCSA compliance while maintaining 24/7/365 operational readiness. The Fleet Mechanic serves as the primary technical resource for all vehicle-related issues and works closely with operations leadership to minimize downtime, coordinate repairs, and optimize system performance. This is a hands-on, safety-critical role requiring strong diagnostic ability, leadership, and the ability to manage maintenance operations in a fast-paced transportation environment. Responsibilities Maintenance & Repair • Oversee all maintenance and repair operations across GCT’s transportation systems, including shuttles, buses, executive sedans, SUVs, and vans, • Develop and manage preventive maintenance schedules to ensure reliability and minimize downtime, • Diagnose and repair mechanical, electrical, hydraulic, and diesel-related issues across all vehicle types, • Coordinate mobile repair services and manage relationships with external vendors and service providers, • Manage parts inventory, ordering, and vendor relationships to ensure timely repairs and cost efficiency, • Ensure all vehicles are consistently maintained to operational and safety standards Compliance & Safety • Ensure all vehicles meet DOT/FMCSA safety and compliance standards at all times, • Review and verify Driver Vehicle Inspection Reports (DVIRs) submitted via the Motive platform, • Maintain comprehensive maintenance records, inspection logs, and compliance documentation, • Coordinate annual inspections, emissions testing, and required regulatory inspections, • Respond to and document vehicle-related incidents or accidents for insurance and safety reporting, • Implement and enforce safety protocols and best practices Team Leadership & Operations Support • Supervise and coordinate maintenance technicians and mobile mechanics, • Provide training and mentorship on repair procedures, safety standards, and operational best practices, • Work closely with operations and shift managers to prioritize repairs and maintain vehicle availability, • Respond to emergency breakdowns and coordinate roadside assistance when needed, • Coordinate with mobile fuel and vehicle cleaning service providers to support daily operations, • Support continuous operational readiness for 24/7 service Administrative & Reporting • Maintain detailed maintenance logs and service records for all vehicles, • Prepare and submit reports on vehicle status, repair costs, and overall system performance, • Manage maintenance budgets and track expenses to improve efficiency, • Identify cost-saving opportunities across maintenance operations, • Coordinate warranty claims and insurance documentation for vehicle damage or defects, • Utilize fleet management systems (e.g., Motive) to track vehicle health and maintenance needs Requirements • 5+ years of experience as a diesel or automotive mechanic, including supervisory experience, • Personal maintenance truck and tools preferred, • ASE certifications preferred; CDL Class B license or ability to obtain within 90 days preferred, • Strong knowledge of DOT/FMCSA vehicle compliance and inspection requirements, • Experience working with motorcoaches, Blue Bird activity buses, Starcraft mini coaches, Ford Transits, Mercedes vehicles, Van Terras, Ford Expeditions, and Volvo vehicles strongly preferred, • Proven ability to diagnose and repair diesel engines, air brake systems, electrical systems, and hydraulic systems, • Strong leadership and team management skills, with the ability to train and mentor technicians, • Proficiency with fleet management software and computer-based diagnostic tools, • Ability to prioritize multiple repair projects and effectively manage emergency situations, • Excellent communication skills, with the ability to coordinate with operations staff and external vendors, • Must be able to work in a 24/7/365 operational environment, including on-call availability for emergency repairs, • Willingness to work extended hours, weekends, and holidays as needed to support business demands, • Ability to respond to urgent maintenance needs and vehicle breakdowns outside of standard business hours, • Comfortable working in a workshop and field environment, including physical activity such as lifting, bending, and use of tools, • Ability to work extended hours during vehicle emergencies or critical maintenance periods, • Availability for on-call emergency repairs as required, • Ability to support operations across multiple locations, including primary facility and Dorchester shuttle yard

Job DescriptionLocation: Charleston, SC - Field-Based (North Charleston / Ladson / Summerville industrial corridor) Service Area: Charleston metro, including the Port of Charleston, I-26/I-526 logistics corridor, and surrounding distribution, manufacturing, and industrial hubs Reports To: Business Owner Employment Type: Full-Time Compensation: $30.00–$50.00/hour based on experience and qualifications, plus a performance incentive plan (detailed separately) tied to customer satisfaction, efficiency, and territory growth Pay Structure: Stable hourly pay - no flat rate - with incentive bonuses layered on top. Position SummaryDuraFleet is looking for an experienced Lead Mobile Diesel Technician to provide maintenance and repair services for commercial fleet customers throughout the Charleston metro. This is an opportunity to help build a new territory backed by an established and expanding mobile fleet service brand. The ideal candidate is a skilled, dependable technician who can diagnose problems accurately, complete quality repairs in the field, communicate professionally with customers, and document work thoroughly. Charleston's industrial base - the Port, the I-26 corridor, the manufacturing and distribution operations stacked along I-526 - runs on diesel equipment that can't afford downtime. DuraFleet exists to fix that: fast, honest, professional mobile service that keeps fleets moving. We're building a reputation on fairness and 5-star service, not on flat-rate games or upsells. The person we hire for this role sets that tone from day one. Key ResponsibilitiesHands-on technical work: • Perform preventive maintenance, inspections, diagnostics, and repairs on commercial fleet vehicles, • Diagnose diesel engine, electrical, brake, steering, suspension, drivetrain, and related system concerns, • Use diagnostic equipment, multimeters, service information, and sound troubleshooting practices across light-, medium-, and heavy-duty equipment, • Complete mobile repairs at customer facilities, fleet yards, and roadside locations throughout the Charleston metro, • Conduct thorough vehicle inspections and flag safety or maintenance concerns before they become breakdowns, • Maintain accurate digital work orders - labor, parts, notes, inspections, and photos, • Keep your service vehicle, tools, and equipment organized and road-ready As the Charleston operation grows: • Help establish strong service standards for future DuraFleet Charleston technicians, • May participate in interviewing and evaluating candidates as DuraFleet hires additional technicians, • May mentor and train other technicians on diagnostics, repair quality, and customer communication, • Coordinate with the Business Owner on parts, approvals, pricing conversations, and job planning, • Represent DuraFleet professionally with fleet customers - clear communication, honest recommendations, no surprises, • Deliver excellent customer service on every call, every time - this is how DuraFleet builds its reputation Required Qualifications• At least three years of commercial vehicle, diesel, fleet, or heavy-equipment maintenance experience • Strong independent diagnostic and mechanical troubleshooting ability - comfortable being the only technician on site, • Experience with preventive maintenance, electrical systems, brakes, steering, and suspension across a range of equipment, from light-duty up to heavy-duty, • Confidence with electronic diagnostic tools and OEM/aftermarket service software, • Ability to complete accurate digital documentation using cloud-based service systems, • Professional communication and customer service skills - you're often the only DuraFleet representative a customer sees, • Valid driver's license and a driving record acceptable under company insurance requirements, • Ability to travel throughout the Charleston metro service area, • Ability to perform the physical requirements of the position, with or without reasonable accommodation, • A suitable place to park and secure a company service truck at your residence Plus Qualifications• ASE Medium/Heavy Truck certifications • Class A or B Commercial Driver's License, • Qualified commercial vehicle or brake inspector credentials, • Experience with air brakes, trailers, hydraulics, liftgates, welding, or fabrication, • Experience with Shop Monkey or similar fleet maintenance/shop-management software, • EPA refrigerant certification for servicing reefer/transport refrigeration units, • Prior experience mentoring, training, or leading other technicians, • Previous mobile service or roadside repair experience What Success Looks Like• Vehicles are diagnosed accurately and repaired correctly the first time • Customers consistently rate DuraFleet 5 stars and call us before they call anyone else, • Work orders are complete, timely, and well documented, • Safety requirements and service procedures are consistently followed, • Customer downtime is reduced, visit after visit Your Service TruckYou'll be assigned a fully equipped DuraFleet mobile service truck, which you keep at your home between shifts. You start and end your workday from home rather than commuting to a shop first - the truck is your rolling workspace for the territory. Work EnvironmentThis is a field-based position serving the Charleston metro and surrounding market - customer facilities, distribution centers, fleet yards, roadside locations, and other commercial operating environments. Occasional schedule flexibility may be needed for urgent customer service requests. Why Join DuraFleetDuraFleet is backed by an established, expanding mobile fleet service brand, opening a new territory in one of Charleston's most active industrial and logistics corridors. Charleston's fleet and logistics scene is only getting busier, and DuraFleet intends to be the name every fleet manager in the metro trusts first. You'll help build that reputation from the start. If you're tired of flat-rate pressure, shop politics, or being just another number, this is a chance to help build something fair, professional, and genuinely good - and to be rewarded for it. DuraFleet is an equal opportunity employer. Employment decisions are based on qualifications, experience, performance, and business needs.

Job Description Skyworks LLC is a family-owned and operated construction equipment rental company. Skyworks is a team inspired by a positive culture to build exceptional customer experiences. Our Charleston branch is opening soon and will need several full-time Mechanics. Duties and responsibilities for Mechanic: • maintain the branch's equipment fleet, • diagnose and fix issues with equipment Qualifications for Mechanic: • electrical and hydraulic experience, • experience repairing construction equipment, • valid driver's license Pay depends on experience. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Vision insurance #INDMECH #LI-DNI

Job Description Position Overview: We are proud to support our nation's Veterans by offering career opportunities that value military training, discipline, and technical expertise. As a Diesel Technician, you will leverage the skills acquired during your military service to diagnose, repair, and maintain diesel engines and heavy-duty vehicles. This position is exclusively for U.S. Military Veterans who have received an Honorable Discharge. Key Responsibilities: • Perform routine maintenance and inspections on diesel engines and heavy-duty vehicles., • Diagnose mechanical, electrical, and hydraulic issues using diagnostic tools and technical manuals., • Conduct engine rebuilds, component overhauls, and part replacements with precision., • Interpret work orders and technical documentation to determine repair procedures., • Maintain accurate service records and ensure documentation complies with company and regulatory standards., • Utilize military-level discipline and attention to detail in every repair or service task., • Adhere to all OSHA and company safety procedures., • Collaborate with team members to ensure efficient workflow and maintain high operational readiness., • Communicate effectively with supervisors and team leaders regarding job status and repair needs. Requirements Requirements: • Must be a U.S. Military Veteran with an Honorable Discharge (documentation required)., • Proven experience working on diesel engines during military service (e.g., tanks, tactical vehicles, generators, transport trucks)., • Ability to read and interpret service manuals, schematics, and technical bulletins., • Familiarity with hand tools, power tools, and diagnostic equipment., • Strong problem-solving and mechanical aptitude., • Physical ability to lift heavy objects, stand for extended periods, and work in various environments., • Valid driver’s license (CDL is a plus). Preferred Qualifications: • MOS/Rating background in mechanical fields such as (but NOT limited to):, • 91B (Wheeled Vehicle Mechanic – Army), • 3521 (Organizational Automotive Mechanic – USMC), • CM (Construction Mechanic – Navy), • 2T3X1 (Vehicle Maintenance – Air Force), • Diesel or automotive technician certifications (ASE, OEM-specific, etc.)., • Experience with military or civilian fleet maintenance operations., • Completion of a military technical school or SkillBridge program. Benefits Why Join Us? • Veteran-friendly workplace culture, • Competitive pay and comprehensive benefits, • Continued training and advancement opportunities, • Transition support and mentorship from fellow Veterans, • A mission-driven environment where your service is respected and valued

\n \n \n \n \n \n \n \n \n Join BoldAge PACE and Make a Difference! \n \n Why work with us? \n \n • A People First Environment: We make what is important to those we serve important to us.\n, • Make an Impact: Enhance the quality of life for seniors. \n, • Professional Growth: Access to training and career development.\n \n Competitive Compensation: \n \n • Medical/Dental\n, • Generous Paid Time Off\n, • 401K with Match*\n, • Life Insurance\n, • Tuition Reimbursement\n, • Flexible Spending Account\n, • Employee Assistance Program\n \n BE PART OF OUR MISSION! \n Are you passionate about helping older adults live meaningful, independent lives at home with grace and dignity? BoldAge PACE is an all-inclusive program of care, personalized to meet the individual health and well-being needs of our participants. Our approach is simple: We listen to our participants and their caregivers to truly understand their needs and desires. \n Physical Therapist Assistant \n SUMMARY: The Physical Therapist Assistant (PTA) at BoldAge PACE works under the supervision of a licensed Physical Therapist to deliver high-quality patient care and support the interdisciplinary team. Responsibilities include based on individual state scope of practice- implementing and modifying treatment plans, educating participants and their families, maintaining accurate documentation, and managing a caseload. The PTA actively participates in patient conferences, agency in-services, and quality improvement initiatives. Additional duties involve assisting with student and intern supervision of a Physical Therapy Assistant, scheduling, and contributing to discipline-specific projects such as chart audits and peer reviews. This role is integral to providing direct, person-centered care that aligns with BoldAge PACE’s mission and values. \n \n ESSESNTIAL DUTIES AND RESPONSIBILITIES: \n \n • Implement physical therapy treatment plans under the supervision of a physical therapist.\n, • Assist patients with exercises, mobility training, and therapeutic interventions such as heat, cold, or electrical stimulation.\n, • Monitor participant performance, adjust treatments within scope, and communicate progress or challenges to the supervising physical therapist.\n, • Teach participants to use assistive devices and educate them and their families on home exercises, safety, injury prevention, and post-treatment care to empower independence.\n, • Document therapy sessions, outcomes, and report changes in participant condition or adverse reactions.\n, • Maintain therapy equipment, ensure a clean and safe environment, and adhere to safety protocols and infection control procedures.\n, • Contribute to treatment plan adjustments, participate in staff meetings, and assist with equipment and supply management.\n, • Provide support with participant transfers.\n, • Act within the legal scope of practice and uphold ethical and professional care standards.\n, • Perform additional duties as assigned.\n \n \n PRE-EMPLOYMENT REQUIREMENTS: \n \n • Must have reliable transportation, a valid driver's license, and the minimum state required liability auto insurance. \n, • Be medically cleared for communicable diseases and have all immunizations up to date before engaging in direct participant contact. \n, • Pass a comprehensive criminal background check that may include, but is not limited to, federal and state Medicare/Medicaid exclusion lists, criminal history, education verification, license verification, reference check, and drug screen. \n \n \n \n EDUCATION AND EXPERIENCE: \n \n • Associate of Arts Degree from a Physical Therapy Assistant program accredited by the Commission on Accreditation on Physical Therapy Education (CAPTE) \n, • Current state license, or eligibility for licensure \n, • One year’s experience as a PTA preferred\n, • 1 year of experience working with a frail or elderly population preferred. If this is not present, training will be provided upon hiring. \n \n SKILLS AND ABILITIES: \n \n • Work effectively with patients, families, staff, and external agencies, including emotionally or physically challenging situations.\n, • \n \n \n \n \n \n \n \n \n

Position Summary: \n Sapient Logic is seeking a Systems Software Engineer to support a Government mission customer in Charleston, SC or Reston, VA. This full-time, on-site role requires strong systems programming and database engineering expertise. The engineer will analyze and modify database engine internals, network protocols, and core services to support secure mission applications and integrations. \n \n Responsibilities: \n ·Develop, maintain, test, and deploy secure, scalable applications and services using C, C++, Rust, Go, Java, Python, or Node.js. \n · Apply systems programming principles, particularly in C, C++, and Rust, to develop performant and reliable software components. \n · Develop software supporting process creation, monitoring, control, and inter-process communication. \n · Build concurrent and multithreaded applications using appropriate synchronization, signal handling, memory management, and resource-control techniques. \n · Design, implement, and troubleshoot networked applications using sockets, client-server architectures, and applicable network protocols. \n · Analyze database engine source code, communication protocols, request and response formats, serialization, and packet layouts to support development and integration. \n · Trace requests through database engine code to identify processing logic, integration points, and the effects of proposed modifications. \n · Develop relational data-storage solutions using Structured Query Language (SQL), including data modeling, query development, performance tuning, and access control. \n · Develop and integrate graph database solutions supporting relationship-based data modeling, analysis, and retrieval. \n · Work across relational databases, graph databases, object storage, and search/indexing engines, including technologies such as PostgreSQL, Redis, RxDB, Neo4j, Amazon S3, and Elasticsearch. \n · Refactor and modernize existing services, including transitioning functionality from Python to other implementation languages where appropriate. \n · Develop and maintain Infrastructure as Code (IaC) to provision, configure, and manage infrastructure through repeatable, version-controlled workflows. \n · Deploy, monitor, and troubleshoot cloud-hosted software, including dependencies on compute, storage, networking, identity, and security services. \n · Integrate applications with identity providers to support authentication, authorization, federation, single sign-on, and identity-aware access control. \n · Implement OpenID Connect (OIDC) integrations, including token validation, claims processing, client registration, redirect flows, session management, and secure API access. \n · Incorporate Zero Trust Architecture principles into software designs, including interactions among policy decision, administration, information, and enforcement components. \n · Collaborate with cybersecurity, infrastructure, data, and mission stakeholders to integrate security controls, cryptographic protections, logging, monitoring, and auditability throughout the software development lifecycle. \n · Produce and maintain software designs, interface specifications, deployment procedures, configuration baselines, security implementation details, and operational support materials. \n \n Required Qualifications: \n · Bachelor’s degree in a quantitative field such as engineering or mathematics is required. Relevant fields include Electrical Engineering, Computer Engineering, Computer Science, Information Technology, and Information Systems. \n · 10 years of professional software engineering experience (typical). \n · Prior experience supporting the Intelligence Community. \n · Experience applying programming concepts in a professional or academic setting. \n · Experience applying modern software development methodologies, such as Agile, DevOps, or DevSecOps, in a professional or academic setting. \n · Hands-on systems programming experience in one or more of C, C++, or Rust, with the ability to work across additional languages and runtimes as needed. \n · Experience with operating-system interfaces, process management, inter-process communication, concurrency, and multithreaded application development. \n · Understanding of synchronization primitives, signal handling, memory management, and resource management. \n · Experience developing or troubleshooting socket-based applications and client-server communications. \n · Experience with database engine internals, network protocol development, or comparable source-code and low-level systems analysis. \n · Ability to navigate unfamiliar source code, trace execution and data flows, and assess how changes affect performance, interoperability, concurrency, and security. \n · Experience with relational database design, SQL, query optimization, and database access controls. \n · Understanding of graph database concepts and their application to relationship-based data. \n · Experience developing infrastructure automation and deploying or supporting software in cloud environments. \n · Experience integrating applications with identity services using OIDC and applying authentication and authorization controls. \n · Understanding of Zero Trust Architecture concepts, including Policy Decision Points (PDPs), Policy Administration Points (PAPs), Policy Information Points (PIPs), and Policy Enforcement Points (PEPs). \n · Strong troubleshooting, technical documentation, and collaboration skills. \n · Agile Developer certification or Certified Scrum Developer certification. \n · CompTIA Security+ or higher-level cybersecurity certification. \n · Active DoD Top Secret/Sensitive Compartmented Information (TS/SCI) Clearance with the ability to obtain a Counterintelligence (CI) Polygraph is required. \n · U.S. Citizenship is required. \n Candidates who meet the qualifications above do not need experience with every technology listed under desired qualifications. Depth in systems programming and database engineering, paired with the ability to learn adjacent technologies, is what matters most. \n \n Desired Qualifications: \n · Advanced education: Master’s degree in a quantitative field such as engineering or mathematics. Relevant fields include Electrical Engineering, Computer Engineering, Computer Science, Information Technology, and Information Systems. \n · Database engineering: Experience with PostgreSQL and Neo4j, including database design, administration, performance optimization, and application integration. \n · Protocol engineering: Experience interpreting packet captures, working with binary message formats, developing protocol parsers, or modifying database clients, drivers, extensions, or engine code. \n · Infrastructure automation: Experience using Terraform and Ansible for cloud infrastructure provisioning, configuration management, and application deployment. \n · Cloud and platform engineering: Experience deploying and maintaining applications and infrastructure in Amazon Web Services (AWS), including AWS GovCloud, Kubernetes, Red Hat OpenShift, and environments subject to Department of Defense Impact Level 5 requirements. \n · Identity platforms: Experience with PingFederate, Keycloak, Radiant Logic, SailPoint, Secret Server, or Okta; experience migrating identity providers and adapting application code is especially useful. \n · Public Key Infrastructure (PKI): Experience implementing certificate lifecycle management, key management, certificate validation, and cryptographic service integrations. \n · Cryptographic interfaces: Experience using PKCS #11 to integrate applications with cryptographic tokens, Hardware Security Modules (HSMs), or other secure key-storage mechanisms. \n · Modern cryptography: Experience implementing, evaluating, or integrating cryptographic algorithms, including Module-Lattice-Based Key-Encapsulation Mechanism (ML-KEM). \n · Data protection and service integration: Experience with Trusted Data Format (TDF), Go-based security services, enterprise service integration, or serialization technologies such as Protocol Buffers. \n \n Job Type: \n\n • Full-time\n\n \n\n • Benefits:401(k)\n, • 401(k) matching\n, • Dental insurance\n, • Employee assistance program\n, • Flexible spending account\n, • Health insurance\n, • Health savings account\n, • Life insurance\n, • Paid time off\n, • Parental leave\n, • Professional development assistance\n, • Retirement plan\n, • Vision insurance\n\n \n Schedule: \n\n • 8-hour shift\n, • Monday to Friday\n, • Day shift\n, • Ability to work additional hours as needed to support mission requirements\n\n \n\n • Work Location: On-site – Charleston, SC or Reston, VA (Washington, DC metro)\n\n \n\n • Security Clearance: Active TS/SCI clearance required\n\n \n\n • Salary: $160,000–$215,000\n

Job Description Company and Job Description Cransten is revolutionizing the handyman and residential remodeling industry. We distinguish ourselves with dedication to our customers’ satisfaction and our transparency with our employees. The absolute core of Cransten’s business model is employing highly skilled, service-oriented and trustworthy individuals who intend to increase their skill set and grow within the company. Does that describe you? As an team member, we will first get an understanding of your skill set. We will determine a course of action to ensure that we cater to your particular strengths and assess the skills that may not yet have been developed. The typical schedule is Monday through Friday during regular business hours, although adjustments can usually be accommodated, within reason. We will schedule 1-2 jobs each day, ranging in scope from ceiling fan installations to a full bathroom remodel, so this is definitely the environment for those who enjoy doing something new each day. Your schedule (hosted on a smartphone app) will detail the time and place, the description of work, anticipated hours required, price estimate and the customer contact information. Prior to your appointments, you will call the customer to confirm, prepare yourself with the appropriate tools, pick up specified material and arrive. You will take photos of the area and collect the customer's signature and if more work is required than initially anticipated, you will adjust the cost (aka change order). You will complete the work with dedication to customer service and quality, and upon completion, take photos and obtain the customer signature. There are three tiers of experience within our company: Handyman, Journeyman, and Master level. This position is for our Master level. The intention is that whichever level you’re brought on at, we ensure we provide opportunities to advance. Consistent performance with an intention to improve provides recognition and growth. Requirements: • Professional experience in all stages of remodeling, • Fully equipped for all stages of remodeling, • Reliable vehicle capable of transporting tools and materials, • Smoke-free during working hours Professional Experience: • Framing, • Windows and doors installation, • Siding, • Drywall, • Trim, • Painting, • Basic electrical, • Counters and cabinets installation, • Backsplash, • Shower tile, • Basic plumbing, • Flooring, • General handyman and Punch List Here is what you can expect from Cransten: We want to ensure you’re the right fit for us and equally, that we’re the right fit for you. • Transparency and integrity, • Growth opportunities, • Work/life balance, • Ability to work independently or to learn from others (based on skill level), • Benefits (health, vision, dental) Want to know what our customers think of Cransten? “Cransten Handyman and Remodeling is a pleasant surprise. Instead of getting an overpriced, salesy company, you get an affordable and pressure free experience. [...] Thank you to all the crew at Cransten who made it possible to enjoy my vacation home again.” Here’s what our employees have to say: “The company fulfills the mission and values on a daily basis. They more likely care for their employees and there is always a new adventure everyday and a privilege to grow.” “A great company to work at, a perfect company to start your career with and a family-oriented environment. Also, my co-workers, there are very accommodating although, the job is quite challenging I love it still because that's how I learn and develop my skills.” Want to learn more about Cransten? https://cransten.com/ http://cransten.com/careers \nCompany Description Cransten is revolutionizing the home services industry, rapidly establishing itself as a superior service, second to none. Here is what our employees have to say: “The company fulfills the mission and values on a daily basis. They more likely care for their employees and there is always a new adventure everyday and a privilege to grow.” “A great company to work at, a perfect company to start your career with and a family-oriented environment. Also, my co-workers, there are very accommodating although, the job is quite challenging I love it still because that's how I learn and develop my skills.” Cransten is revolutionizing the home services industry, rapidly establishing itself as a superior service, second to none. \r\n\r\nHere is what our employees have to say:\r\n\r\n“The company fulfills the mission and values on a daily basis. They more likely care for their employees and there is always a new adventure everyday and a privilege to grow.”\r\n\r\n“A great company to work at, a perfect company to start your career with and a family-oriented environment. Also, my co-workers, there are very accommodating although, the job is quite challenging I love it still because that's how I learn and develop my skills.”

Job DescriptionOverview • Join the client as a Commercial Electrician supporting commercial electrical projects across South Florida. Apply your journeyman-level expertise to power distribution, lighting controls, electrical installations, and related systems.Qualifications, • Minimum 1 year of fence installation, construction, landscaping, or related outdoor labor experience preferred, • Ability to perform physically demanding work in outdoor environments year-round, • Experience using hand tools, power tools, and construction equipment, • Strong attention to detail and commitment to quality workmanship, • Dependable, punctual, and team-orientedResponsibilities, • Fence Installation & Construction, • Measure and accurately lay out fence lines according to project specifications, • Dig post holes and properly set posts to ensure structural stability and longevity, • Install wood, vinyl, chain-link, aluminum, and ornamental fencing systems, • Utilize hand tools, power tools, and construction equipment safely and efficiently

Job DescriptionNow Hiring: Experienced Handyman or Handywoman in the Greater Charleston Area Handyman Connection of Mount Pleasant is seeking a skilled and versatile craftsperson to join our growing team. We are looking for someone with a variety of home improvement skills, a strong work ethic, and a positive attitude. If you enjoy helping others and take pride in your craft, this could be the perfect opportunity for you. Benefits • Competitive pay: $25.00–$30.00 per hour or up to $1,200 per week, based on skills and availability, • Professional office support with scheduling, customer service, and job tracking, • Free access to our mobile app for scheduling and communication, • Steady flow of well-qualified customers through proven marketing campaigns, • Branded apparel and signage provided, • Opportunity to serve homeowners and businesses in Mount Pleasant and the surrounding areaJob Summary, • Perform a wide variety of residential and light commercial repair, maintenance, and remodeling projects, • Provide accurate bids and complete projects to customer satisfaction, • Communicate effectively with clients, team members, and suppliersJob Requirements, • Skilled in at least three of the following:, • General Carpentry (Rough and Finish), • Bathroom Upgrades or Remodels, • Kitchen Refresh or Remodels, • Interior and Exterior Painting, • Drywall Repair, Patching, and Caulking, • Minor Plumbing and Electrical Work, • Flooring Installation or Repair, • General Home Repairs and Maintenance, • Strong customer service and client relations skills, • Knowledge of building codes and material management, • Valid driver’s license and insurance, • Own tools, work vehicle, and references, • Experience in remodeling or home repair trades, • Independent contractors must carry liability insurance and workers’ comp, • Smartphone and reliable internet accessHandyman Connection values skilled professionals who want to grow with a respected, established company. If you have the experience and dedication to deliver quality work, we would love to hear from you. Apply today and join Handyman Connection of Mount Pleasant.

Overview: Simpson Housing is a large, fully-integrated real estate company with an enthusiastic entrepreneurial spirit. For 75 years, we have acquired, developed, built, and managed luxury apartment communities in highly desirable locations throughout the United States. We are driven by our Mission and Core Values and believe that our most valuable asset is our team. Simpson Housing is committed to be a trusted leader in the multifamily industry. Our mission is to provide an exceptional employee experience, award-winning customer service, long-term value to our investors, and enhance our local communities. Responsibilities: Maintenance Technician II - _ (a premier class A 175-unit mid-rise community located on Daniel Island) – Charleston, SC. We are proud to have been voted by our employees as a 2024 - 2026 USA Best Workplace in and as a 2024 and 2025 Top 15 workplace in the ! As a key member of our property maintenance team, you will be responsible for: • Maintaining and preserving a multi-million dollar luxury community ensuring a quality living experience for our residents, • Utilizing your troubleshooting and technical skills to identify and resolve issues with HVAC, plumbing, electrical, sewer/water, swimming pools and security systems, • Developing a strong rapport with residents and assisting them with resolving various general maintenance issues (appliances, flooring, cabinets, locks, drywall, etc.) in a timely manner, • Working closely with the service team, you will help prepare vacant apartment units ensuring they are ready to lease to prospective residents per company specifications, • Helping the service team maintain a strong curb appeal at the property Qualifications:, • 1+ years of related general maintenance experience, • General knowledge and experience with HVAC systems, electrical, plumbing, appliance repair and basic carpentry, • CPO certification required (can be obtained after hire), • Fair housing training required and CAMT (Apartment Maintenance) certification preferred, • Some experience with MS Office Suite (Word and Outlook), • Strong customer service skills, • At times, will be required to be on call What Simpson Can Offer You: As an industry leader, we understand what it takes to be successful in today’s competitive marketplace. Just as you’re unique in your skills, experience, and personality, each of our jobs has a curated set of benefits specific to the position. Simpson is proud to offer you: • Shoe stipend – twice per year we will reimburse max of $125, • Uniforms provided – new uniforms ordered twice per year, • On-call bonus (if applicable) – for every week of scheduled on-call duty, you will receive a $100 bonus, • Quarterly service bonus – earn up to 6% of your salary based on performance, paid quarterly, • Generous paid time off (PTO) program for full-time employees– all team members start at 15 days per year, • Additional paid days off: 9 holidays, 2 floating holidays, and 2 designated wellness days, • Health, dental, and vision insurance, • Flexible spending accounts, • Life and AD&D insurance, • Disability insurance, • 401(k) plan with company match –100% employer match of contributions up to $3,500 per year Why work for Simpson? You might want to ask one of our employees that question. Our business is focused on community and improving the lives of those around us. We aim to deliver happiness while managing our communities and residents, engaging in our local communities, and creating a rewarding experience for our employees. Our supportive community of team members are welcoming and celebrate each other’s differences. Their commitment to service continues to strengthen the Simpson name. If this sounds like the type of company that you would like to work for, we would like to hear from you. Find out where your talents can take you by applying today! Pay Range: $26.00 - $28.00 per hour This pay range is approximate and the actual pay received may vary dependent upon certain factors such as related job experience, education, training, professional/industry certifications, etc. Please note this pay range does not include any additional compensation this position may be eligible for as listed above, such as commissions or bonuses. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills and abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Applications are accepted on an ongoing basis. Simpson Housing is an Equal Opportunity Employer Job type: Full-time Schedule: Monday to Friday, Day shift, On call, Overtime Keyword Search: Real Estate, Multifamily, Apartments, Building Maintenance, Technician, HVAC, Makeready, Facilities, Building Engineer #MT Location : City: Charleston Location : State/Province: SC

\n TotalMed Allied is seeking a travel Cath Lab Technologist for a travel job in Charleston, South Carolina. Job Description & Requirements\n \n • Specialty: Cath Lab Technologist\n, • Discipline: Allied Health Professional\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 8 hours, days\n, • Employment Type: Travel\n \n \n We're looking for a Cardiac Catheterization Radiologist (Cath Lab Rad) for an immediate travel opening in Charleston, SC. \n The right Cath Lab Rad must have 1 year of experience. Read below for additional requirements. \n Cath Lab Rads assist doctors during advanced diagnostic and interventional cardiac procedures such as cardiac catheterization, peripheral vascular procedures, and structural heart procedures in the Cardiac Catheterization Lab. Scrubbing, monitoring and assisting providers as requested. \n As a Cath Lab Rad, you will be responsible for: \n \n • Preparing the Cardiac Lab procedure rooms by ensuring adequate stock is available and in working condition, including instrument sterilization if applicable.\n, • Preparing patient and equipment for cardiac lab procedures by preparing site of entry, draping patient, arranging sterilized instruments and catheters, and calibrating and setting up pressure transducers and tubing.\n, • Operating and ensuring the quality control of all equipment utilized in the cardiac cath lab. Knowledge of all related equipment within the laboratory.\n, • Scrubbing in during procedures, assisting the physician in maneuvering catheters.\n, • Obtaining and recording hemodynamic, electrical, and angiographic data by operating-hemodynamic and electrical amplifiers and digital and line fluoroscopic equipment.\n, • Monitoring the patient's hemodynamic status during procedures in the cardiac cath lab.\n, • Participating in life-saving measures such as defibrillation and cardiopulmonary resuscitation.\n Cath Lab Rads should be able to stand and walk for long periods of time, as well as bend, lean or stoop without difficulty. \n \n \n Must have 1 year of experience. The Cath Lab Rad must have BLS, ACLS, ARRT (R) -CI preferred or CCI-RCIS certification, and state specific licensing when required.\n \n Requirements*: ARRT, CCI, BLS, 1 Year\n \n • Additional certifications may be required before beginning an assignment.\n \n TotalMed Allied Job ID #1532251. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Allied Cath Lab Technologist - Travel About TotalMed Allied\n \n TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. \n \n TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. \n Benefits\n \n • Weekly pay\n, • Guaranteed Hours\n, • Continuing Education\n, • 401k retirement plan\n, • Sick pay\n, • Wellness and fitness programs\n, • Referral bonus\n, • Medical benefits\n, • Employee assistance programs\n, • Dental benefits\n, • Vision benefits\n, • Benefits start day 1\n \n

Position Description Ryder is hiring aMid-LevelDiesel Technician in North Charleston, SC— providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/TECH2 • Hourly Pay: $34.00 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Friday Weekends OFF, • Hours: Second Shift 1:30 pm – 10:00 pm We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Spots are filling fast — click apply now to secure your spot. Questions? Call “Jason” or text “North Charleston” to 904-541-9211 to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Basic diagnostics and repairs, including AC and electrical systems, required, • Three (3) years or more relevant work experience, preferred, • All other certification as required by location, required, • Valid Commercial Driver License (CDL) CLASS A,preferred, • All other certification as required by location, required, • ADDITIONAL REQUIREMENTS:, • Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc., • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties including:, • Performs standard vehicle maintenance, • Performs preventive maintenance, • Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable, • Completes complex and detailed mechanical inspections & repairs with minimal supervision, • Replaces defective components as instructed, • Works unsupervised on most tasks, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task., • Utilizes key functions of Shop Management System and electronic documentation available., • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)., • Acts as mentor for Tech 1 and Tech 2 levels., • Demonstrate the ability to access and use internal and external maintenance documents., • Other support duties as required to support operations. These could include but are not limited to Service Island support, • SBTIII trained within 180 days (SBT220), • Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days) Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 week ago (10/23/2026 12:55 PM) Requisition ID 2026-213995 Location (Posting Location) : State/Province SC Location (Posting Location) : City NORTH CHARLESTON Location (Posting Location) : Postal Code 29418 Category Technicians/Service Employees5 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000356 Min Pay USD $34.00/Hr. Max Pay USD $34.00/Hr.

Job Description Novatech is a Managed Office Provider, offering a comprehensive portfolio of IT, Print, Cloud and Security solutions for organizations across the country. We are growing nationwide and expanding into new markets across the US. This growth has created additional opportunities for talented tech-minded individuals to join our team. Bring your career to Novatech and join our incredible team of Managed Office Experts. Are you a professional who has a solid background in building relationships and a passion for selling and providing best service for customers? As we grow nationwide, we have a great opportunity for a Field Service (Printer) Technician supporting clients in the greater Charleston area. In this role, we are looking for client-focused, technically minded professionals that can be described as diligent, passionate, intuitive, big picture thinkers, optimistic, self-motivated, adaptive, and collaborative. Your Job: • Provide technical diagnostics and repair to existing client accounts, • Perform preventative maintenance and repair services on office equipment, • Maintain a rapport with clients by examining complains and suggesting viable solutions, • Document service and installation actions by entering data and completing reports, • Work together in a teamwork environment with dispatchers, service managers and other customer service staff, • Update job knowledge by participating in educational opportunities and reading professional publications You are Good at: • Providing excellent ongoing communication and service to our clients, • Learning new processes quickly and solving problems, • Working hard with a positive attitude, • Using computers and performing basic print and scan installations You Bring to Novatech: • Minimum 2 years hands on experience servicing copiers, • Experience working on Canon, Konica Minolta, HP and/or Xerox office products, • CompTIA A+ or Network + certifications a plus but not required, • A mechanical or electrical aptitude, • Factory training or applicable certifications are preferred, • A valid driver’s license You Must be Able to: • Repeatedly lift up to 100 pounds, • Push machines from one location to another, • Load trucks and vehicles, • Stand up to 8 hours a day Novatech provides competitive compensation, great benefits, a positive upbeat culture, and ongoing professional development for your career. • Market competitive salary based upon experience, • Mileage reimbursement program, • Comprehensive benefit package including medical, prescription, dental, vision, life insurance and other supplemental coverage, • 401(k) plan with matching company contribution, • Generous Paid Time Off, Volunteer Time Off, Floating Holiday, Company Holidays and Parental Leave, • $300 per year to contribute to achieving your personal wellness and fitness goals, • Employee Recognition Programs Novatech provides equal employment opportunities (EEO) to all employees and applicants. We consider qualified applicants for employment regardless of race, color, religion, creed, national origin, sex, pregnancy, sexual orientation, gender identification, disability, alienage or citizenship status, marital status, genetic information, veteran status, or any other characteristic protected under applicable law. \nCompany Description Novatech is a nationwide Managed Office provider that delivers a complete portfolio of technology solutions including IT, Print, Cloud, and Security. Headquartered in Nashville, Tennessee, the company partners with businesses across the country to streamline operations, strengthen security, and improve productivity. Since its founding in 1998, Novatech has built a reputation for combining innovative technology with personalized service, offering clients a single trusted source for their office technology needs. With a culture focused on growth, integrity, and collaboration, Novatech continues to expand its national presence while creating rewarding opportunities for professionals who want to grow their careers in the technology industry. Novatech is a nationwide Managed Office provider that delivers a complete portfolio of technology solutions including IT, Print, Cloud, and Security. Headquartered in Nashville, Tennessee, the company partners with businesses across the country to streamline operations, strengthen security, and improve productivity. Since its founding in 1998, Novatech has built a reputation for combining innovative technology with personalized service, offering clients a single trusted source for their office technology needs. With a culture focused on growth, integrity, and collaboration, Novatech continues to expand its national presence while creating rewarding opportunities for professionals who want to grow their careers in the technology industry.

Job DescriptionDescription: Who we are: Aerzen USA Corp. is an international manufacturer of positive displacement blowers, hybrid blowers, screw compressors and turbo blowers. These high-quality machines are used for air and gas applications across many essential industries, including; Wastewater, Cement, Biogas, Pharmaceutical and Food, among many others. We are One Team, and we Empower our team members to be both Inquisitive and Evolutionary. What We Offer: Aerzen USA offers a competitive salary; generous health benefits (to include 96% company-paid benefit plans) with company HSA contribution; a 401(k) with company match; a tuition reimbursement program; and a profit share bonus package; along with the opportunity to work with a dynamic group of professionals. What You'll Do: As a Field Service Technician, you will perform and carry out all tasks related to installing, assembling, servicing, and repairing Aerzen products. They provide customers with prompt, professional and high-quality service. Work is performed at our location and/or at our customer’s location. Services provided may be scheduled or on-demand. Overnight travel on short notice is often required. Essential Functions & Responsibilities: • Performs startups, equipment inspections, troubleshooting, repairs and/or preventive maintenance service on all Aerzen Products at customer sites; Represent Aerzen in professional and courteous manner following all Aerzen and customer safety requirements., • Installing, configuring, calibrating and maintaining control, measurement and indicating instrumentation (pneumatic, analog & digital); Installing and terminating electrical, pneumatic and fluid connections; Understand controls narratives and analyze/troubleshoot process application related issues., • Analyzing and correcting communication issues; Properly address TCP/IP networks and RS-485 communications., • Perform repairs and assembly on Aerzen Products; Disassemble; assess damage and evaluate failures on machines; diagnose problems with Aerzen machines by evaluating material condition and asking the customer questions; demonstrates the ability to offer machine-based recommendations; can identify the root cause of a machine failure; Utilize defined procedures and a standard rebuild kit., • Read, understand and use equipment diagrams, checklists, engineering drawings, and other process documentation to perform service tasks, assembly and repairs on Aerzen Products., • Communicate with customers to discuss job requirements, provide recommendations and service options, listen to customer concerns, and provide status updates during service call and at completion., • Evaluate customer future needs and communicate information through appropriate channels., • Assist engineering in plant design, modifications and hazard analysis., • Plan and schedule travel to best meet customer requirement, service schedule requirement and time efficiency utilizing the Concur booking tool., • Complete job-related service reports, expense reports and forms in a timely basis; Collect data and make commissioning graphs using Company Software., • Complete written repair reports to document cause of failure, description of work performed, materials consumed, condition of equipment as received and as returned to the customer., • Conduct customer training on Aerzen Products when onsite., • Perform all work in accordance with quality standards, established safety procedures and maintains a clean, safe work area., • Participate in departmental initiatives such as, but not limited to, inventory counts, shop organization, clean-up and other duties assigned by the manager.Requirements: Position Qualifications: Education: Associates Degree (2 years schooling) in electronics technology or equivalent experience. Experience (yrs): Over 4 years of Field Service and Repair experience in rotating equipment. Software/Applications: Windows, Microsoft Office, Internet Abilities; TCP/IP networks and RS-485 communications; Allen Bradley PLC experience is preferred. Functional Skills: Excellent planning, prioritization, organization, and execution skills; high attention to details and ability to analyze large amounts of data; analytical and logical thinker who can problem-solve and implement solutions, excellent with time management. Other Skills: RS Logix 5000 experience is preferred; PLC or similar Ladder-Logic programming experience is desired; Ability to Interpret process flow, control wiring, as well as piping and instrumentation diagrams; Welding (brazing, cutting, welding, plasma) a plus. Strong customer-focus, excellent leadership and change-management skills, with the ability to listen, motivate, and influence others to action; high integrity and compliance mindset. Ability to travel more than 50% of the time. Monday - Friday with weekends back at home. Aerzen USA Corp., inclusive of its subsidiaries (further “Aerzen”) is an equal opportunity employer and selects employees based on skills and experience. Aerzen ensures that all persons are entitled to equal employment opportunity without regard to race, color, gender, gender identity, sexual orientation, pregnancy, age, national origin, religion, marital status, ancestry, disability, veteran’s status, and any other characteristic protected under applicable federal, state, or local laws. All employment decisions and actions are based on merit and made without regard to any characteristic protected by state, federal or local law. Aerzen is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation to participate in the job application or interview process, contact hr-usa@aerzen.com. All offers of employment at Aerzen USA Corp are contingent upon clear results of a thorough background check. In compliance with the Drug-Free Workplace Act of 1988, Aerzen USA Corp has a longstanding commitment to provide a safe, quality-oriented, and productive work environment. Alcohol and drug misuse poses a threat to the health and safety of Aerzen employees and to the security of the company's equipment and facilities. For these reasons, Aerzen USA Corp is committed to the elimination of drug and alcohol use and misuse in the workplace. Applicants being considered for hire must pass a drug test before beginning work. Refusal to submit to testing will result in disqualification of further employment consideration. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including termination of employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

Job Description Appliance Repair Technician – Whirlpool Brand Specialist Compensation: $22–$40+ per hour, plus performance bonuses and incentives Enjoy the convenience of dispatching directly from your home in a company-provided vehicle and starting your day on the road — no office check-ins required. Why Join Our Team? We’re looking for motivated, skilled technicians who take pride in delivering exceptional customer experiences and high-quality repairs. If you’re experienced in appliance repair and want to work for a company that values your expertise, supports your growth, and rewards performance, we want to hear from you. Immediate openings are available for experienced technicians specializing in Whirlpool Brand Service. Benefits & Perks • Company-provided service vehicle, • Competitive hourly pay with performance-based bonuses, • Health Insurance (Medical & Prescription), • Dental & Vision Insurance, • Voluntary Life Insurance, • Short-Term & Long-Term Disability, • Accident & Critical Illness Coverage, • Employee Assistance Program (EAP), • Paid Time Off & Paid Holidays, • Retirement Plan, • Paid Training & Continuing Education, • Career Growth & Advancement Opportunities, • Supportive team environment with industry-leading resources What You'll Do • Deliver outstanding in-home service experiences for customers, • Diagnose and repair major household appliances including:, • Refrigerators, • Washers & Dryers, • Gas & Electric Ranges, • Dishwashers, • Microwave Ovens, • Troubleshoot and repair refrigeration sealed systems, • Educate customers on repairs, maintenance, and recommendations, • Utilize mobile technology to manage work orders in a paperless environment, • Stay current with evolving appliance and smart-home technology, • Complete ongoing technical and manufacturer training, • Safely operate company vehicles and maintain a professional appearance, • Consistently deliver a 5-star customer experience What We're Looking For • Strong diagnostic and troubleshooting skills, • Experience with refrigeration sealed system repair, • Appliance repair experience preferred, • HVAC, electrical, or mechanical experience also considered, • Customer-focused mindset with excellent communication skills, • Ability to work independently and manage daily routes efficiently, • Willingness to continue learning and growing within the industry, • Valid driver's license with a clean driving record, • Ability to lift and maneuver up to 50 lbs, • High school diploma or equivalent, • Bilingual skills are a plus Build a Career — Not Just a Job This is more than just a technician position. Our technicians enjoy competitive hourly earnings, bonus opportunities, ongoing training, and clear paths for advancement. Whether you're an experienced appliance technician or bringing transferable HVAC, electrical, or mechanical skills, we provide the tools, support, and opportunities to help you maximize your success. If you're ready to take your career to the next level, apply today. #ZR \nCompany Description Appliance Repair Technician – Whirlpool Brand Specialist Compensation: $20–$40+ per hour, plus performance bonuses and incentives Enjoy the convenience of dispatching directly from your home in a company-provided vehicle and starting your day on the road — no office check-ins required. Immediate openings are available for experienced and entry level technicians specializing in Whirlpool Brand Service. Benefits & Perks Company-provided service vehicle Competitive hourly pay with performance-based bonuses Health Insurance (Medical & Prescription) Dental & Vision Insurance Voluntary Life Insurance Short-Term & Long-Term Disability Accident & Critical Illness Coverage Employee Assistance Program (EAP) Paid Time Off & Paid Holidays Retirement Plan Paid Training & Continuing Education Career Growth & Advancement Opportunities Supportive team environment with industry-leading resources What You'll Do What We're Looking For Strong diagnostic and troubleshooting skills Experience with refrigeration sealed system repair Appliance repair experience preferred HVAC, electrical, or mechanical experience also considered Customer-focused mindset with excellent communication skills Ability to work independently and manage daily routes efficiently Willingness to continue learning and growing within the industry Valid driver's license with a clean driving record Ability to lift and maneuver up to 50 lbs High school diploma or equivalent Bilingual skills are a plus Build a Career — Not Just a Job This is more than just a technician position. Our technicians enjoy competitive hourly earnings, bonus opportunities, ongoing training, and clear paths for advancement. Whether you're an experienced appliance technician or bringing transferable HVAC, electrical, or mechanical skills, we provide the tools, support, and opportunities to help you maximize your success. If you're ready to take your career to the next level, apply today. #ZR Appliance Repair Technician – Whirlpool Brand Specialist\n\nCompensation: $20–$40+ per hour, plus performance bonuses and incentives\n\nEnjoy the convenience of dispatching directly from your home in a company-provided vehicle and starting your day on the road — no office check-ins required. Immediate openings are available for experienced and entry level technicians specializing in Whirlpool Brand Service.\n\nBenefits & Perks\n\nCompany-provided service vehicle\nCompetitive hourly pay with performance-based bonuses\nHealth Insurance (Medical & Prescription)\nDental & Vision Insurance\nVoluntary Life Insurance\nShort-Term & Long-Term Disability\nAccident & Critical Illness Coverage\nEmployee Assistance Program (EAP)\nPaid Time Off & Paid Holidays\nRetirement Plan\nPaid Training & Continuing Education\nCareer Growth & Advancement Opportunities\nSupportive team environment with industry-leading resources\n\nWhat You'll Do\n\nWhat We're Looking For\n\nStrong diagnostic and troubleshooting skills\nExperience with refrigeration sealed system repair\nAppliance repair experience preferred\nHVAC, electrical, or mechanical experience also considered\nCustomer-focused mindset with excellent communication skills\nAbility to work independently and manage daily routes efficiently\nWillingness to continue learning and growing within the industry\nValid driver's license with a clean driving record\nAbility to lift and maneuver up to 50 lbs\nHigh school diploma or equivalent\nBilingual skills are a plus\n\nBuild a Career — Not Just a Job\n\nThis is more than just a technician position. Our technicians enjoy competitive hourly earnings, bonus opportunities, ongoing training, and clear paths for advancement. Whether you're an experienced appliance technician or bringing transferable HVAC, electrical, or mechanical skills, we provide the tools, support, and opportunities to help you maximize your success.\n\nIf you're ready to take your career to the next level, apply today. #ZR

Job DescriptionBenefits: • Free Friday Breakfasts, • A positive and collaborative work environment, • Voluntary Life Insurance, • Short and Long Term Disability, • Medical, Dental and Vision, • 401K Matching (after 6 months of employment), • Company work truck is provided, • offered after 60 days of employment, • Opportunity for advancement, • Free uniforms, • Paid time off, • Training & development Generator Mechanic / Service Technician Full-Time | Monday–Friday | Company Vehicle Provided Location: Mt Pleasant, SC Power Up Your Career with Generator Supercenter Generator Supercenter, Inc. is the #1 provider of home standby generators and a leader in renewable energy solutions. We’re on a mission to help homeowners stay safe, secure, and powered through cutting-edge backup power systems and clean energy technologies. We are hiring a dependable and skilled Generator Mechanic / Service Technician to join our growing team. This field-based role is ideal for candidates with mechanical and electrical repair experience—particularly with small engines, standby generators, or automatic transfer switches (ATS). Key Responsibilities: • Travel to residential job sites using a company-provided service vehicle, • Perform diagnostics, routine maintenance, and repairs on whole-home standby generators, • Troubleshoot and service mechanical and electrical components, including ATS systems, • Read and interpret electrical wiring diagrams, blueprints, and technical manuals, • Clearly communicate with customers regarding services performed and any recommendations, • Accurately document all work in our service management software, • Follow safety protocols and industry best practices when working around electricity, • Support emergency service calls during weather-related outages or storms, as neededQualifications:, • 1+ years of experience in generator service, small engine repair, or related mechanical/electrical work, • Strong customer service and verbal communication skills, • Ability to read schematics, wiring diagrams, and service manuals, • Comfortable working independently in the field with minimal supervision, • High school diploma or equivalent required, • Valid driver’s license with a clean driving record, • Physically able to perform job duties, including climbing ladders, lifting equipment, and working in outdoor environments, • Familiarity with residential generator systems and ATS technology is a plusPosition Details:, • Schedule: Monday to Friday, 8:00 AM – 5:00 PM (occasional flexibility required for emergencies), • Job Type: Full-time, • Compensation: Based on experience and skill level, • Travel: Local/regional service calls using a company-provided vehicleWhy Join Generator Supercenter?, • Industry-leading training and support, • Competitive pay and advancement opportunities, • Company-provided vehicle, tools, and equipment, • Be part of a growing team making a real impact in energy reliability and securityApply today to start a rewarding career in generator repair and renewable energy service!

Job Description G&W Equipment, Inc. is a family-owned dealership for CAT® Lift Trucks, Mitsubishi Forklifts, and Jungheinrich Forklifts. We provide sales, service, and support for material handling and aerial equipment across North Carolina, South Carolina, and Georgia. Description A Field Service Technician for our Charleston, SC branch provides service and repair for forklifts and material handling equipment at customer facilities. This role requires strong diagnostic and troubleshooting skills, the ability to work independently in the field, and a commitment to delivering safe, reliable repairs that keep customer operations running smoothly. Key Responsibilities • Diagnose and repair forklifts and material handling equipment (electric, LPG, diesel, and gas), • Perform planned maintenance, safety inspections, and emergency repairs, • Troubleshoot mechanical, electrical, hydraulic, and electronic systems, • Communicate clearly with customers regarding repairs, recommendations, and equipment status, • Complete service reports and documentation accurately and on time, • Maintain service vehicle, tools, and inventory in a professional manner, • Follow all safety policies and procedures Qualifications • 2+ years of experience repairing forklifts or heavy equipment preferred, • Experience working with multiple brands of forklifts preferred, • Strong mechanical, electrical, and hydraulic troubleshooting skills, • Ability to work independently with minimal supervision, • Valid driver’s license and clean driving record, • Good communication and customer service skills, • Ability to lift up to 50 lbs and work in varying environments What We Bring to the Table: G&W Equipment, Inc. offers stability, career advancement, a positive work environment, and employee referral incentives. • Competitive compensation and PTO, • Extensive hands-on training and advancement opportunities, • Flexible Hours with the opportunity for overtime, • 401(k) plan includes a 100% company match up to the first 6% of savings, • Medical (HSA and PPO options), Dental and Vision insurance, • Short and Long-term Disability - No cost to you!, • Life Insurance - company paid with option to purchase more Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor. Powered by JazzHR EG8hEndlF3

Job Description Overview About M.C. Dean M.C. Dean is Building Intelligence®. We design, build, operate, and maintain cyber-physical solutions for the nation’s most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 9,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Why Join Us? Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values—agility, expertise, and trust—we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. We are seeking an Electronics Technician 3 to join our Security and Electronic Systems (SES) business Unit. As part of (SES) Strategic Business Unit you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Responsibilities Executes various technical tasks and responsibilities within field operations. Performs on-site installations, maintenance, troubleshooting, and repairs of equipment and systems. Ensures the functionality and reliability of various technologies. Key duties include conducting site surveys, configuring hardware and software, testing systems for proper operation, and providing technical support to customers. Field Technicians must possess strong problem-solving skills, technical proficiency, and the ability to communicate effectively with clients and team members. • Utilizes and comprehends project Safety plan (JHA, AHA, PFW), enforcing M.C. Dean handbook and policies., • Participates in quality reviews of M.C. Dean design documentation, analyzing and interpreting drawing packages to evaluate constructability., • Tracks project metrics and participates in weekly resource allocation meetings., • Verifies correct charges in timesheets on projects., • Executes installation and maintenance activities within planned durations, ensuring completion of detailed documentation., • Tracks and inventories tools, conducts tool inspections, and organizes material ordering and receiving., • Conducts daily ORM meetings, ensures team compliance with safety requirements, and completes accident/incident reporting., • Participates in PITCO plan creation and build out, executing PITCO plan to ensure high-quality testing and installation., • Installs system raceway, cabling, equipment racks, enclosures, and panels, adhering to industry standards. · Terminates, tests, and configures electronic devices, network and IT equipment., • Manages base switch configurations, participates in configuration of servers and workstations, and troubleshoots programmable components., • Ensures compliance with established QC plans and checklists, conducting quality control inspections and documenting findings., • Installs and maintains field devices, terminates and tests system components, and troubleshoots copper and fiber optic issues. · Leads commissioning efforts, tracks commissioning activities, and assists in representing M.C. Dean in meetings with owners and design teams., • Communicates consistently with MC Dean Project Teams, other trades, and customers, demonstrating dedication and collaboration., • Leads by example, provides constructive feedback, mentors crew members, and encourages strategic thinking and innovation., • Demonstrates strong communication, interpersonal, and time management skills, aligning with M.C. Dean's vision, mission, and values., • Provides look ahead for assignment of manpower, material procurement/staging and resource planning. · This is not intended to be an all-inclusive list of job duties and responsibilities. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. Qualifications Key Requirements: • Requires a Valid driver's license. This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy Education: • HS diploma or GED is required, • Graduation from an accredited Electronics Technician program or, • Graduation from an Electrical Apprenticeship program, • An additional three (3) years of electronics installation and/or maintenance activities Required Progressive Experience: • 6+ years of electronics installation and/or maintenance activities on multiple systems and with multiple customer programs, • Strong Oral, Written and Presentation Skills., • Demonstrated background working with multidisciplinary teams., • Demonstrated time management and organization skills to meet deadlines and quality objectives., • Strong MS Excel, Word and PowerPoint Skills is a plus. Preferred Qualifications: • Vendor certifications in multiple IDS, ACS, and CCTV systems CCURE, Lenel, Identiv/Hirsch Velocity, Bosch Radionics, Bosch CCTV, Bosch BVMS, AIphone Intercom Systems Airphone, FFT, DIVAR, Windows operating systems & certifications and experience in installation of said systems., • 3 years experience focused in electronic security systems, • OSHA 30 certification What we offer: • A collaborative team inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust., • An opportunity to lead and build a business with the support of an industry-leading firm that has been in business for 75 years., • Investment in your skills and expertise through a combination of professional and technical training programs, including leadership training and tuition reimbursement., • Open and transparent communication with senior leadership as well as local office management. Abilities: • The position requires the ability to lift, carry, and move objects weighing up to [50 pounds] on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety., • Relocates a 12 foot stepladder without assistance., • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders., • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis., • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English., • May use a standard ladder without exceeding the weight limit while carrying tools., • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem., • Apply general rules to specific problems to produce answers that make sense., • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events)., • See details at close range (within a few feet of the observer)., • Listen to and understand information and ideas presented through spoken words and sentences.

Job Description Our mission is to show our residential customers that they are truly valued as we have a strong emphasis on providing an unparalleled 5-Star experience unmatched in the Smart Security industry. As an Installation Technician, you'll play a pivotal role in what matters most to our customers: enhancing the safety and security of their families and homes. We know what it takes to be successful here at SafeStreets. If you’re someone who enjoys working independently, has a strong work ethic, and takes pride in getting the job done right, we will assist you in creating a seamless transition into a new career. The process is simple. There is no cold calling, D2D sales, or upselling involved. As an Installation Technician, your day will consist of traveling directly to customers’ homes to complete scheduled security camera installations. As a trusted partner for both Google and Amazon installations as a service, you’ll be provided with daily appointments and will typically complete 5–7 installations per day. Our installations are designed to be quick and efficient, most include 1 battery doorbell or exterior “Ring” style security camera, allowing you to move from one job to the next without lengthy customer interactions. Each appointment should, in most cases, take less than an hour to complete. You’ll install the necessary equipment, make sure the equipment is functioning properly, and move on to your next scheduled appointment. Looking to change industries? Feel confident knowing that we have Installation Technicians with backgrounds in all types of industries who have made a seamless and successful transition into the home security industry. With a top-tier paid training program provided, we have all the tools to teach you what you need to know. What do you need to be qualified for this position? A strong work ethic, reliability, attention to detail, ability to travel to multiple installation locations daily, and a willingness to learn. You do not need a sales background or extensive customer service experience to be successful in this role. We provide select tools/equipment, paid training at $22/hr, and post-training support you will need to become a successful Installation Technician. What You Can Expect: • Piece Rate Pay for each installation to include base pay per install plus installation pay for each device installed, • Mileage pay is also included for workday travel, • Consistent daily appointments with 5–7 installations per day, • No cold calling, D2D sales, or upselling, • Company-provided equipment and select tools, • Paid training at $22/hr, • Remote and independent work environment, • Opportunities for career advancement within a rapidly growing organization, • Scheduling flexibility, • Medical/Dental/Vision/Life Insurance/401K The Responsibilities: • Travel to scheduled residential customer appointments throughout your assigned area, • Install and configure security camera equipment according to company standards, • Test systems to ensure proper functionality after leaving the home, • Troubleshoot basic installation or equipment issues, • Complete approximately 6–7 installations per day, • Maintain a safe, organized, and professional work environment, • Accurately document completed installation work, • Provide a brief overview of the installed system to the homeowner when necessary Qualifications: • Reliable and dependable work ethic, • Able to work independently and manage a daily schedule, • Ability to work efficiently in a fast-paced environment, • Strong attention to detail, • Willingness to learn and follow installation procedures, • Reliable vehicle and valid driver's license, • Proof of vehicle insurance (100/300/100 minimum), • Previous installation, construction, electrical, low-voltage, home security, or technician experience is preferred SafeStreets values the safety of our employees and customers. That is why we are committed to providing personal protective equipment (PPE) or stipends to our technicians to further ensure their safety. This job entails meeting certain physical requirements, including the ability to work above head level, carry loads of 30–50 pounds (such as equipment boxes and ladders), operate power tools, and navigate confined spaces like attics and crawl spaces. Safe Streets is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or terminate, will be based on merit, competence, performance, and business needs. Safe Streets does not discriminate on the basis of race, color, religion, sex (including pregnancy and gender identity), marital status, age, national origin, sexual orientation, disability, genetic information, military service, or any other status protected under federal, state, or local law. Applicants have rights under Federal Employment Laws. FMLA - https://www.dol.gov/agencies/whd/fmla EEO - https://www.eeoc.gov/history/equal-employment-opportunity-act-1972 EPPA - https://www.dol.gov/agencies/whd/polygraph

Job DescriptionJoin Our Team as a Residential and Light Commercial Contractor – Handyman Connection of Mount Pleasant Are you a skilled craftsman or craftswoman with a wide range of home improvement expertise? Do you take pride in delivering high-quality work the first time? If so, Handyman Connection of Mount Pleasant is looking for you! We’re seeking a Residential and Light Commercial Contractor to join our team. Our customer base is growing quickly, and we need versatile professionals who can handle a variety of projects while providing an outstanding experience for our clients. Why Join Us: • Earn $25.00–$30.00/hr or up to $1,200/week based on skills and availability, • Support from an office team handling scheduling, customer service, and job coordination, • Flexible scheduling options, • Work with a great team and customers in the Mount Pleasant area, • Access to our mobile app for booking and communication, • Exclusive branded apparel and marketing signs What You’ll Do: • Provide residential and light commercial contracting services in Mount Pleasant and surrounding areas, • Deliver accurate quotes and complete projects with attention to detail, • Communicate clearly with both customers and colleaguesRequirements:, • Proficiency in at least three of the following:, • Carpentry, • Bathroom upgrades, • Kitchen remodeling, • Interior/exterior painting, • Drywall repair and caulking, • Small plumbing and electrical work, • Flooring installation and refinishing, • Excellent customer service skills, • Knowledge of building codes, • Valid driver’s license and insurance, • Your own tools, work vehicle, and references, • Liability insurance and worker’s comp, • Smartphone and internet accessHandyman Connection strongly encourages applicants with experience as a Residential or Light Commercial Contractor or in similar roles. Ready to get started? Contact us today to schedule an appointment with Handyman Connection of Mount Pleasant!

Job Description Job brief We are looking for a self-starter Field Service Technician to deliver the desired customer service experience. The goal is to drive service success that improves customer satisfaction, maximizes customer retention and increases profitability. Responsibilities • Provide service and customer support during field visits or dispatches, • Tie workflow to schedule, • Manage all on site installation, repair, maintenance and test tasks, • Diagnose errors or technical problems and determine proper solutions, • Produce timely and detailed service reports with clarity, • Document processes, • Operate vehicle in a safely manner, • Follow all company’s filed procedures and protocols, • Cooperate with technical team and share information across the organization, • Comprehend customer requirements and make appropriate recommendations/briefings, • Build positive relationships with customers Requirements • Proven Field Service experience, • Must have the ability to read a voltage meter incumbent with reading a schematic diagram, • Experience electrical/mechanical repair in appliances (deli ovens, dishwashers, fryers, etc), • Ability to troubleshoot, test, repair and service technical equipment, • Ability to work flexible shifts and to adapt to changing work schedules, • Familiarity with mobile tools and applications

Job Description WHO WE ARE BCES Global is a North American electrical contracting platform delivering safe, reliable, and high‑quality power‑system services across industrial, commercial, utility, and mission‑critical environments. We combine deep local expertise with enterprise‑level resources to support grid reliability, system upgrades, predictive maintenance, and emergency response across Canada and the US. WHAT WE OFFER • 401K with 7% (US) / 5 % RRSP (CA) matching and immediate vesting, • 100% employer paid benefits, • Paid PTO, • Career development and advancement opportunities, • Travel and relocation opportunities throughout the larger organization WHAT WE NEED We are seeking a skilled and safety‑driven NETA‑Certified Field Service Technician to join our growing team. In this role, you will perform testing, maintenance, troubleshooting, and commissioning of electrical power systems across industrial, commercial, utility, and institutional environments. You'll work with regional teams who combine deep local knowledge with enterprise‑wide resources to support critical projects involving grid reliability, system upgrades, predictive maintenance, and emergency response. WHAT YOU WILL DO • Perform acceptance testing, maintenance testing, and system commissioning in accordance with NETA standards., • Test and diagnose low‑, medium‑, and high‑voltage electrical equipment, including breakers, transformers, relays, switchgear, and protective systems., • Conduct electrical studies, analyze test data, and prepare accurate technical reports., • Support system upgrades, retrofits, and power system troubleshooting in both planned and emergency scenarios., • Ensure all work meets safety, regulatory, and quality‑assurance requirements., • Collaborate with project managers, engineers, and field teams to deliver reliable, client‑focused solutions. WHAT YOU BRING • Current or previous NETA/NICET Level I-IV certification (or equivalent experience with intent to certify)., • Hands‑on experience with power system testing, commissioning, or maintenance., • Strong understanding of NETA standards, electrical theory, and power distribution equipment., • Ability to analyze test data and produce detailed technical documentation., • A commitment to safety, accuracy, and high‑quality workmanship., • Willingness to travel to job sites within your region and throughout North America. Third-party resume submissions are not accepted. Any resume submitted will be considered the property of THE COMPANY, and THE COMPANY will not be held liable to pay a placement fee. BCES Global is an equal opportunity employer and is committed to inclusive, barrier‑free recruitment and selection processes. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, national or ethnic origin, age, disability, veteran status, or any other characteristic protected by applicable federal, state, provincial, or local laws in Canada and the United States. Accommodations are available upon request throughout the recruitment process in accordance with applicable accessibility and human rights legislation, including the Accessibility for Ontarians with Disabilities Act (AODA). As part of our hiring process, BCES Global may use technology, including AI‑enabled tools, to support screening and evaluation. All hiring decisions are made fairly, with human oversight, and in alignment with our commitment to equity and compliance.

Job Description APPLIANCE TECHNICIAN Join a Company That's Growing . . . Looking for a change, but you still love the trade? Sloan Appliance is expanding across Charleston, SC and surrounding area, and we're hiring experienced appliance technicians to grow with us. While a lot of shops are cutting back right now, we're adding technicians and territory. JOB TYPE: Full-time Compensation $32,000 -$45,000/year guaranteed base (during training period), or commission earnings - whichever is higher, per pay period. Most technicians earn meaningfully more ($60,000-$85,000) once route and speed builds up. ABOUT SLOAN APPLIANCE: We're a factory-certified service provider for Samsung, GE, Electrolux, and Bosch - meaning manufacturers send their warranty and service work directly to us. That steady pipeline of work is why we're growing instead of shrinking, and it's why we invest heavily in the technicians who make that service possible. YOUR ROLE: A year from now, you'll be running your own route - diagnosing and repairing major appliances in customers' homes, building a reputation for fast, reliable service, and growing your earnings through commission as your efficiency builds. Your territory is designed around your home address, so most days you start and end from home instead of driving to an office. WHAT YOU'LL DO • Diagnose and repair major appliances — refrigerators, washers, dryers, dishwashers, ovens, ranges, freezers, microwaves, and more — in residential, commercial, and apartment/community living settings, • Troubleshoot mechanical and electrical problems using schematics, technical manuals, and manufacturer resources to identify the cause of failures and determine the appropriate repair, • Install and test new appliances, • Complete repairs accurately and efficiently, using company technology to support your work, • Explain diagnoses and repair recommendations to customers, property managers, and maintenance staff, addressing questions about repairs, timelines, and costs, • Provide professional, courteous, and exceptional customer service on every job, whether in a private home, apartment community, or commercial property, • Maintain accurate records of parts used, and work performed on every job, • Adhere to safety protocols and maintain a clean, organized, professional work environment - both on the job site and in your service van WHAT WE'RE LOOKING FOR Required: • High interest in repairing major household appliances, or equivalent with mechanical/electrical technician role, preferred, • Strong mechanical and electrical troubleshooting ability; comfortable reading schematics and technical manuals, • Mechanical aptitude and a willingness to learn reading schematics and technical manuals as needed, • Excellent problem-solving skills with the ability to diagnose issues accurately, • Ability to work independently in customers' homes, being detail-oriented and managing time efficiently - remember, you are a guest in their home, • Strong communication and customer service skills, • Ability to safely use hand tools and repair equipment, • Valid driver's license and an insurable driving record, • Dependable and professional work habits, • Able to pass a pre-employment drug screen and criminal background check Beneficial: • Background experience with appliance or mechanical repair 1-3 years, • Manufacturer training or certification (Samsung, GE, Electrolux, Bosch), • EPA 608 certification, or willingness to obtain one, • Good sense of humor and able to roll with the punches COMPENSATION & BENEFITS • Competitive pay: guaranteed base pay with the opportunity to earn more through commission per pay period whichever is greater, • Company-provided van, tools, iPad/computer, cell phone, gas card, and uniforms, • Health insurance, • Paid holidays, • Ongoing paid training and mentorship, with manufacturer support and resources, • Standard hours with a home-based territory -start and end your day from home, • Supportive team environment, • Professional development opportunities with clear paths to advancement: Lead Technician, Prescreener, Supervisor If you have a passion for appliance repair, excellent technical skills, and enjoy providing exceptional customer service, we encourage you to apply for this position. Join our team of dedicated professionals and help us deliver top-notch appliance repair services to our valued customers. Whether you are an experienced appliance technician or have the mechanical aptitude to learn about the trade, apply today. We are proud EOE. Experience: Appliance repair: 1-3 year (Preferred but not required License/Certification: Driver's License (Required) Work Location: On the road \nCompany Description Since 1958, Sloan Appliance Service has been the premier factory-authorized appliance repair center in the Midlands. Family-owned and trusted for over 60 years, we deliver expert service with a personal touch. Every repair is backed by our customer guarantee — because we stand behind our work. Since 1958, Sloan Appliance Service has been the premier factory-authorized appliance repair center in the Midlands. Family-owned and trusted for over 60 years, we deliver expert service with a personal touch. Every repair is backed by our customer guarantee — because we stand behind our work.

Job Description Summary of Responsibilities The Service Technician II plays a vital role in maintaining the quality, safety, and habitability of homes managed by FirstKey Homes. This position is responsible for completing resident maintenance requests, performing repairs, and ensuring homes remain in excellent condition. Operating both independently and as part of a team, the Service Technician II executes a broad range of tasks across multiple trades—including plumbing, electrical, HVAC, and general home maintenance. The role requires daily travel throughout the assigned market to complete service requests using company-provided tools, materials, and inventory. Success in this role involves timely, high-quality repair work and a strong commitment to delivering exceptional customer service to residents. Essential Duties • Ensure all maintenance and repairs comply with company policies, building codes, and state/federal regulations (OSHA, EPA, ADA, Fair Housing, HAZCOM, etc.)., • Identify and report hazards or unsafe conditions promptly to prevent safety risks., • Maintain, repair, and safely operate tools and equipment, ensuring compliance with safety protocols., • Respond to residents in a courteous and professional manner, ensuring prompt resolution of service requests., • Prioritize maintenance requests based on urgency and impact on resident comfort and safety., • Conduct regular inspections of assigned properties to identify potential issues and implement preventive maintenance to avoid costly repairs., • Perform routine and emergency maintenance repairs on plumbing, electrical, HVAC systems, appliances, and general building infrastructure., • Maintain accountability of fleet vehicles, parts, tools, and supplies, ensuring necessary items are available for routine and emergency repairs., • Complete service requests in a professional and timely manner to maintain property conditions and protect company assets., • Other duties may be assigned by the manager based on company needs. Working Conditions • Indoor and outdoor work in varied weather conditions, including extreme heat, cold, and precipitation., • Frequent physical activity, including standing, walking, climbing stairs, bending, kneeling, and lifting up to 50 - 100 lbs., • Exposure to potential hazards, such as electrical systems, construction environments, chemicals, and power tools, requiring adherence to strict safety protocols., • Must be available for evenings, weekends, and on-call rotations as needed., • Extensive field work within the assigned market, with 90% of time spent at homes performing maintenance and repairs and commuting between properties using a company-provided vehicle., • Responsible for maintaining fleet vehicle, tools, and equipment to ensure readiness for travel and job performance. Required Education & Experience • High School Diploma or equivalent., • Strong background in residential construction, maintenance, and remodeling across multiple trades., • Experience performing repairs and maintenance on plumbing, electrical, HVAC systems, appliances, and general home infrastructure., • Valid driver’s license, auto insurance, and reliable, work-appropriate transportation for extensive field travel., • Knowledge of building codes, municipal by-laws, inspections, estimating, and project planning., • Experience reading, writing, and evaluating project specifications and scopes of work. Preferred Education & Experience • Previous experience in multi-family or single-family home maintenance., • Hands-on experience with drywall, texturing, painting, and basic mechanical systems (HVAC, Electrical, Plumbing, Roofing)., • HVAC, Environmental, Mold, or other industry-related certifications., • Prior experience in general trades, construction, property management, or renovation work., • Familiarity with preventative maintenance programs and property inspections., • Training or coursework in building maintenance, construction management, or a related field. Required Knowledge • Safety & Compliance – Understanding of OSHA, EPA, ADA, Fair Housing, HAZCOM, and other state and federal regulations related to property maintenance and workplace safety., • Technology & Systems – Ability to use mobile devices (iPads, smartphones) and maintenance management software to receive work orders, document repairs, and communicate with teams., • Building & Construction – Knowledge of materials, methods, and tools used in the construction, repair, and maintenance of residential homes., • Mechanical Systems – Familiarity with HVAC, plumbing, electrical, and appliance repair, including troubleshooting and maintenance best practices., • Preventive Maintenance – Understanding how to identify potential issues early, perform routine inspections, and take proactive steps to reduce major repairs., • Customer Service – Ability to assess and respond to resident needs while ensuring a positive customer experience., • Fleet & Equipment Management – Knowledge of proper use, maintenance, and safe handling of tools, vehicles, and equipment used in daily field operations. Required Skills • Troubleshooting – Ability to diagnose and resolve maintenance issues efficiently., • Critical Thinking – Using logic and reasoning to identify solutions to maintenance challenges., • Repairing – Hands-on experience in diagnosing and repairing home systems and appliances., • Equipment Selection – Choosing the right tools and equipment for maintenance tasks., • Time Management – Managing workload efficiently and prioritizing service requests., • Communication – Effective verbal and written communication for clear work orders and resident interactions. Work Styles & Behaviors • Safety-Oriented – Prioritizes safety in all tasks, follows protocols, and proactively identifies hazards., • Attention to Detail – Thorough and precise in completing work to ensure quality repairs and maintenance., • Cooperation – Works well with colleagues, residents, and leadership, demonstrating a professional and team-oriented attitude., • Dependability – Reliable, responsible, and committed to completing tasks efficiently and on time., • Independence – Capable of working effectively with minimal supervision, taking ownership of assigned tasks., • Adaptability/Flexibility – Open to change and able to handle a variety of maintenance tasks in a dynamic work environment., • Problem-Solving Mentality – Approaches challenges with a solutions-focused mindset to efficiently resolve issues., • Strong Work Ethic – Maintains a high standard of professionalism and dedication to the job. FirstKey Homes is an equal opportunity employer and will not tolerate discrimination in employment on the basis of race, color, age, sex, sexual orientation, gender identity or expression, religion, disability, ethnicity, national origin, marital status, veteran status, genetic information or any other legally protected classification or status.