Trabajos inspection en Norfolk, Virginia - Page 3Crear alertas

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: NDT VT, MT, PT Inspector, Level II REPORTS TO: NDT Examiner, LIII PAY RANGE: $30.00 - $35.00/Hourly DOE This position is eligible for a one-time bonus in the amount of $2,000.00 following successful completion of VT, and MT NDT Level II method certifications, and following a minimum of 90 days of employment. Summary of position: NDT inspector level II will perform VT, MT and PT inspections on surface ship and submarine structure. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Required Education: High school graduate, or GED Responsibilities: • Performs physical inspections of completed welds and materials on board surface ships and submarines, • Work to approved company inspection procedures, • Assist with Reviews and writing procedures/standards for VT, MT, and PT processes, • Provide on the job training for trainees and LI/LII inspectors, • Ensure work is done safely and meets quality standards, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Report any unsafe work conditions or practice to supervisor, • Qualified NDT VT, MT, and PT Inspector Level II IAW NAVSEA requirements in Tech pub 271 (PT is preferred but not required.), • Experience with SMAW, GTAW and GMAW welding highly preferred, • Have knowledge of welding joint design and joint fit up requirements, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week Mental Requirements: Must be able to carry out simple to complex instructions in a safe and efficient manner. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Location Portsmouth, VA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Assure Nondestructive Testing (NDT) inspections are in compliance with customer directives, requirements, and specifications. This individual will be qualified to properly set up and calibrate equipment to interpret and evaluate results with respect to applicable codes, standards, and specifications. This individual will be familiar with the scope and limitations of the NDT methods for which qualified/certified and will exercise assigned responsibility for on-the-job training and guidance of NDT trainees and NDT Level I personnel. This individual will be able to organize and report the results of NDT inspections. Ensure the requirements set forth in the company Process Instructions and QA Manual are adhered to and enforced. Other duties include working outside of the NDT field in a Tiger Team work environment. Travel and overtime may be required. Strong analytical skills required. Duties And Responsibilities Expectations of this function are: \n • Performing proper set up and calibration of NDT equipment. Interpretation and evaluation of NDT results with respect to applicable codes, standards and specifications. \n, • This individual will be familiar with the scope and limitations of the NDT methods for which qualified/certified. \n, • This individual will be able to organize and report results of NDT inspections. Methods include as a minimum: Visual Inspection (VT), Dye Penetrant Inspection (PT) and Magnetic Inspection (MT) methods may also be used.\n, • Maintaining custody of the equipment required for Level-II NDT inspections.\n, • Maintaining personal NDT training and qualifications.\n EXPERIENCE AND EDUCATION: \n • High School/GED education at a minimum.\n, • Previous Military or industrial training/qualification/certification/experience must be documented to meet Level II requirements.\n, • As an option, this individual may have been a NDT Level I or NDT Trainee at OII-MSD to meet previous training/qualification/experience requirements.\n, • At a minimum, this individual will be certified, able to work independently, and proficient in the following methods: VT and PT.\n, • Additional certifications of other NDT methods preferred, i.e. MT, UT, RT, ET.\n, • NBPL certification a plus.\n, • Technical knowledge with submarine and/or surface combat ships recommended.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Job Description CDL Driver We are looking for a dependable and safety-focused CDL Driver to join our team. This position plays an important role in supporting crews on a variety of construction projects. Responsibilities: * Safely operate CDL vehicles in compliance with DOT regulations * Transport materials, equipment, and supplies to and from job sites * Assist crews with labor work outside of the truck as needed * Follow all company safety policies and procedures * Maintain accurate driving logs and inspection reports Requirements: * Valid CDL license with a clean driving record * Minimum of 2+ years CDL driving experience * Must be willing to get out of the truck and assist crews with labor work when needed * Ability to work days or nights, depending on project schedules * Willingness to travel and stay out of town as job requirements dictate * Strong work ethic and commitment to safety What We Offer: * Competitive pay and benefits package * Opportunities for overtime and travel per diem * Career growth in a supportive team environment Benefits • Health and Dental Insurance, • 401K Program, • Profit Sharing, • Paid Holidays, • Paid Leave

This position involves construction field inspection and testing of construction materials. Reviewing plans and specifications in preparation for field observations on construction sites. Conduct tests and investigations in the field or laboratory to obtain data used by engineering and technical per

Territory Sales Representative: Job Summary: Are you financially happy in your current role? Does your current position have opportunities for growth and a rewarding career? If you need to make more money and have a pathway to career advancement, then Leaf Home is just the opportunity you’ve been looking for! Target earnings of $50,000 to $100,000+ As a Leaf Home territory sales representative, you will work to provide potential customers with your expertise and education about the benefits of LeafFilter gutter protection and gutter replacement. By doing a quick home inspection from the street we will teach you how to identify potential homeowner challenges that Leaf Home has the solution for. Primary Responsibilities: • Generate sales leads for our outside sales team by covering an assigned territory each day, going door to door and engaging prospective customers at their home about Leaf Home products (local travel required)., • Utilize a consultative selling approach to educate consumers on the benefits of Leaf Home and gather information for the sales team to reach out and schedule an in-person product demonstration., • Report daily results to the field management team and develop a collaborative working relationship with other sales representatives., • Ensure a high quality and accurate representation of Leaf Home products by representing the company professionally and ensuring that potential customers have an exceptional experience. Experience and Minimum Qualifications: • High school diploma or equivalent., • Valid Driver’s license, a reliable personal vehicle., • Ability to work evenings and weekends., • Excellent verbal and written communication skills at all levels to communicate with internal and external stakeholders articulately., • Highly motivated to sell with a self-driven desire to meet and exceed goals., • Customer focused and results oriented., • Professional demeanor and attire., • Must be legally authorized to work in the country of employment without sponsorship for employment visa status (e.g., H1B status). Physical Demands: • While performing the duties of this job, the employee must be able to work outdoors daily with exposure to the elements including inclement weather. Extended periods of walking / standing required., • Field office/manufacturing/construction environment., • Sedentary work. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Compensation package and benefits: • Industry-best compensation package with unlimited earning potential, • Paid training, • 401k with company match, • Mileage reimbursement, • Branded apparel, • Independent work, • Individualized career development programs, • Referral Program, • Mentorship program Travel Requirements: • Local travel required. Overtime/Additional Hours Requirements: • May be requested to work overtime on evenings and weekends dependent on business need. Diversity and Inclusion Statement: Leaf Home is committed to creating a diverse environment and is proud to be an equal opportunity employer. We strive to create an environment that embraces differences and fosters inclusion. Equal Opportunity Statement: Leaf Home will recruit, hire, train, and promote persons in all job titles without regard to race, color, ancestry, national origin, gender identity or expression, sexual orientation, marital status, religion, age, results of genetic testing, veteran status, or physical/mental disability (except where the disability prevents the individual from being able to perform the essential functions of the job and cannot be reasonably accommodated in full compliance with the law).

GAI Consultants is seeking an Associate Construction Technician to perform construction inspection on a variety of Power Generation projects. Interpreting specifications and construction drawings and performing field testing of soils and concrete. Reviewing plans and specifications in preparation fo

Job DescriptionRole: Apprentice Gutter Installer This is an entry-level position, and no experience is required! Are you tired of feeling underappreciated and not having a clearly defined career path in your job? Imagine if you could know exactly what you needed to do to receive a pay raise and promotion from day one. At The Brothers that just do Gutters, you can! We provide a skills ladder training program that clearly defines each worker's career path, and expectations, and raises potential. The Brothers that just do Gutters were voted The Best Place To Work By Dutchess County Chamber of Commerce. We truly believe in investing in our employees and have created a work culture unlike any other. We also offer huge opportunities for growth. Apprentice Gutter Installer Requirements: • A positive attitude is a must, as well as the ability to properly and comfortably interact with clients and other employees., • Two years experience in construction is a plus but not required, • Positive attitude, • Excellent communication skills, • Ability to work outdoors in all weather conditions/seasons, • Interest in growing with the company, • Willingness to work overtime Apprentice Gutter Installer Requirements: • Must be 18 or older The Brothers That Just Do Gutters is a rapidly growing, locally owned, and operated franchise with multiple locations across the country. Our mission is to "Reinvent Contractor Service" by providing a great place to work and delivering 5-star service every step of the way from initial phone inquiry, home visit, inspection and estimate, scheduling, timeliness, installation, follow up and ongoing support and service. We want to do what's right for our employees, customers, and communities.

Job Description Job Summary: This position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality. Essential Responsibilities: 1. Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs per established policies, procedures, safety standards, and code requirements., 2. Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work., 3. Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property’s maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs., 4. Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked., 5. Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed., 6. Supports cost-cutting and expense control programs by fixing rather than replacing parts, when possible, not being wasteful with materials and supplies, and practicing the correct use of tools and equipment. Other Responsibilities: 1. Complies with VEST’s safety and risk-management policies by attending and participating in the property’s routine safety meetings, completing required training on OSHA and other safety-related laws and requirements, and reporting accidents and incidents promptly and accurately., 2. May periodically inspect work performed by contractors, vendors, and other service providers to verify the work, materials, and services meet quality standards, scope, and specifications as required., 3. Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management. Organizational Responsibilities: • Follows established policies and procedures by monitoring and ensuring compliance with regulatory requirements, organizational standards, and operational processes related to area(s) of responsibility and reporting violations or infractions to appropriate individual(s)., • Practices proper safety techniques by Company, property, and departmental policies, procedures, and standards by immediately reporting any mechanical or electrical equipment malfunctions, employee/visitor/resident injuries or accidents, or other safety issues to appropriate individual(s)., • Identifies areas for improvement and offers suggestions to improve efficiency and productivity., • Keeps abreast of current changes in technology, processes, and standards within the industry and area(s) of responsibility by attending internal and external training classes, researching and/or subscribing to the internet or other professional publications, or utilizing another appropriate method (s) to obtain business and professional information and applies knowledge and practices to the area(s) of responsibility. Working Conditions: • Incumbents work in an office environment. Physical Demands: • Incumbents need to be able to stand, walk, and/or sit for extended periods and bend, stoop, climb ladders, reach, carry objects, and crawl in confined areas., • Incumbents must be able to work inside and outside in all weather conditions (rain, snow, heat, hail, wind, sleet)., • Incumbents must be able to push, pull, lift, carry, or maneuver weights of up to twenty-five (25) pounds independently and fifty (50) pounds with assistance., • Rare or regular travel may be required to assist other properties as needed, attend training classes, business meetings, or other situations necessary for the accomplishment of some or all the daily responsibilities of this position., • Incumbents must be able to work a flexible work schedule, which includes taking “calls” during evenings, weekends, and holidays. Required Licenses or Certifications: -Incumbents must have EPA certifications Type I and II or Universal for refrigerant recycling. (Applies to Certified Service Technicians.) -Incumbents must have all certifications as required by State and Local jurisdictions. (Applies to all Service Technicians.) -Incumbents must have valid driver’s licenses to operate a golf cart on the property. Knowledge, Skills, Abilities: -Incumbents must provide their hand tools unless prohibited by State law and must be knowledgeable and skilled in the safe use and maintenance of hand tools, power tools, user-moved aids, mechanical equipment, and measuring devices. • Incumbents must have a working and reliable cellular device required for purposes of on-call. -Demonstrated ability to apply principles of logical thinking to define and correct problems. -Proficiency in customer service and interpersonal communication skills to effectively interact with residents, clients, team members, and other business contacts, respond courteously to questions and requests, and stay calm when addressing and resolving customer problems. -Demonstrated ability to read, write, and communicate effectively to represent company management in a support capacity, act as the first point of contact for internal team members and external visitors to the Company, and answer questions related to department operating policies. -High School diploma, GED, or related experience and/or training.

Job DescriptionWindows and Doors Warranty Service Technician UTS, LLC is looking for experienced independent contractors to perform warranty service work for door and window manufacturers and retailers across the United States. Our company brokers inspection, repair, and installation services, ensuring that our partners' products are maintained to the highest standards. If you have expertise in inspecting, repairing, and installing doors and windows, we want to partner with you. About UTS, LLC: UTS, LLC is a Veteran Owned Small Business with a Coast-to-Coast National Network of Skilled Technicians. We provide service, repair, and installation of building products, completing over 10,000 jobs annually. We have a strong reputation for quality and reliability, making us a preferred partner for leading national and global door and window companies. Why Join UTS? • Competitive Pay: Starting at $55/hour, • Additional Compensation: Mileage paid; helper pay is ½ of lead tech pay, pay for your personal ladder usage when needed and pay for parts disposal., • No Job Searching: Jobs are sent to you via a user-friendly phone app, • Flexible Schedule: You manage your hours based on your availability, • Steady Income: Part Time – 4-6 jobs per month. Great extra income. Jobs further than 70 miles, one way, will be quoted to include time spent traveling., • Convenient Payments: Completed work orders are paid via direct deposit bi-weekly., • Automated Scheduling: Use our automated system to receive and schedule jobs., • Travel Compensation: Extra mileage and time spent traveling are compensated. Additional pay for work requiring travel over 70 miles, including hotel expenses if needed.Key Responsibilities:, • Inspection and Repair: Inspect, diagnose, and repair windows and doors under warranty., • Installation: Install new doors as needed., • Customer Interaction: Handle customer relations professionally and courteously., • Mobile App Use: Enter service actions and results directly into our app on-site and respond to automated scheduling text messages to coordinate job schedules. Having an iPhone or iPad is a plus., • Experience: Experience in window and door inspection, repair, and installation., • Tools and Transportation:, • Required Tools:, • Hand tools (hammers, screwdrivers, pliers, etc.), • Power tools (drills, saws, etc.), • Measuring tools (tape measure, level, etc.), • Safety equipment (gloves, safety glasses, etc.), • Specialized tools for windows and doors (glazing tools, caulking guns, pry bars, etc.), • Transportation: Must have suitable transportation for transporting insulated glass units and door units. Examples of acceptable transportation include:, • Trucks with racks or A-frames for secure glass transport, • Trailers equipped to carry large door units safely, • Vans with sufficient cargo space and proper securing mechanisms, • Professionalism: Must speak and act professionally., • Insurance: Proof of General Liability Insurance is REQUIRED. Due to the volume of work, currently having the Certificate of Insurance puts more money in your pocket. qBR0Xc1d23

Job Description We are looking for certified technicians to join our team. If you are tired of where you work and want to work in a clean and safe environment, come and see what we have to offer. We are looking for experienced express lane technicians. We provide an excellent working environment and temperature-controlled environment. If you are looking for an opportunity to work for a fast growing, family owned dealership, Cavalier Ford Lincoln is for you! Cavalier Ford Lincoln is always looking for a qualified individuals to join our sales and service teams to help handle the overflow of work we are experiencing. At Cavalier Ford Lincoln, we strive to make every customer a customer for life. Happy employees make happy customers, and we reward individuals who are ready to work hard and stay motivated. At Cavalier Ford Lincoln, we believe our employees are our greatest asset. As such, we treat all employees with respect and appreciation for their contributions to the company. We believe not only in providing ongoing training, but also rewarding outstanding effort and results through bonus and commission programs. What We Offer * Medical and Dental * 401K Plan * Paid time off and vacation * Growth opportunities * Paid Training * Employee vehicle purchase plans * Family owned and operated * Long term job security * Health and wellness * Flexible Work Schedule * Saturday Lunches * Discounts on products and services Technician Specific Benefits * Air-conditioned shop * State-of-the-art, brand new facility with air-conditioned and cutting edge technology (collision center only) * Shop equipped with the newest technology and equipment * Uniforms provided * Discounts on products and services * Work environment OSHA certified to current Air Quality Standards * Highly productive shop * Career advancement opportunities, promote from within * ASE and state inspection certification reimbursement and all training expenses paid to further your career * Continued education, manufacturer hands on and web based training * Clean and professional work environment * Competitive wages Responsibilities • Check and communicate oil level to teammates, • Ensure tire pressure for proper inflation, • Inspect and refill fluid levels as necessary, • Complete vehicle inspection, • Install a new oil drain plug and a new oil filter, • Clean and lubricate fittings as needed, • Communication skills – communicates effectively with others., • Time management – managing one’s own time and time of others., • Basic computer skills., • Clean driving record, • Willing to submit to a pre-employment background check & drug screen

Job Description Overview Owner Operators Needed! Must be driving under your own authority. • Fuel Transport, • All customers are owned or controlled by the company, • Up to 90% of linehaul rate, • Paid semi-monthly, • Local routes – Home Daily, • $3000 sign on bonus Responsibilities Qualifications • Must have a registered DOT number in good standing with FMCSA, • Must be able to drive under your own authority., • A tractor older than 7 years must be approved, • Must have Class-A CDL and be registered in the state of residence, • At least 23 years old, • Must have at least 1 years of verifiable tractor trailer experience, • Only power units 2005 or newer and must pass DOT inspection, • TWIC card preferred, • No more than 3 moving violations in the past 12 months, • Not cited for more than 1 DOT preventable accident in the past 5 years, • Must provide a police report for any accident or reportable incident within the past 5 years, • Must not be prohibited in the FMCSA Clearinghouse, • Must not have more than 100 CSA points, • Must have copies of CDL, Social Security Card, Medical Card, and DOT Physical Long Form (pages 1-4), • Must have an EIN Number and Letter of Good Standing with the State, • Must produce IRS paperwork for EIN number of company name and State paperwork for filing of their company name

Job Description We are seeking a skilled and motivated Heavy Equipment Field Technician to join our client's team. As a Field Technician, you will be responsible for diagnosing, repairing, and maintaining heavy equipment used in various industries. Your role will involve troubleshooting mechanical issues, performing inspections, and completing necessary repairs or part replacements. You will work directly at client sites, ensuring that the equipment is functioning optimally and minimizing downtime. Attention to detail, strong technical skills, and a commitment to safety are essential for success in this role. If you are a team player who enjoys working in a dynamic environment, we would love to hear from you! • Consults with Service Supervisor to plan effective work and travel schedule, giving priority to customer need, considering location of machine and availability of parts., • Diagnose malfunctions: repairs and/or replaces worn and defective parts; installs new assemblies, adjusts devices and controls - to correct malfunctions and to keep machines in operating condition., • Provides tools and parts and arranges for facilities to perform repair work (usually on customer premises)., • Inspects, operates, and tests machines upon initial delivery, at specified inspection intervals and upon completion of any repair work to ensure proper functioning of equipment and its components., • Reports to Service Supervisor such information as name of customer, description of machine, nature of malfunction, the time involved in working, driving, and waiting, mileage, etc., so that proper accounts can be charged, and proper billing can be made., • Strives to increase technical skills through attendance at company-sponsored vocational schools, annual training meeting of departmental personnel and reading of technical literature., • Promotes and enhances the company image by maintaining a neat, personal appearance and by keeping the service truck in a clean, polished, and orderly condition., • Experienced or advanced servicemen are expected to serve as troubleshooters on recurring or unusual problems, conferring with Engineering, Manufacturing, and other service personnel to resolve., • Experience working on heavy equipment or generators preferred, • Experience working with mechanical, electrical and hydraulic equipment, • 2+ years of field service experience preferred, • Ability to pass a background check, drug screen, MVR and physical, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays)

Senior QA-NDT Inspector Purpose: Colonna's Shipyard is seeking a Senior QA-NDT Inspector to oversee shipyard operations in Norfolk, VA. The Senior QA-NDT Inspector is responsible for conducting, documenting, and maintaining records associated with inspection per customer and contractual requirements. The Inspector will also perform Non-Destructive Testing in the NDT disciplines they are certified to and document those activities in reports and required forms. Job Description: • Oversee / monitors inspections then document inspection results on required forms., • Perform VT, MT, PT, UTT, Shear Wave and UT inspections as required., • Analyzes documents, drawing, customer requirements and quality procedures to ensure the Company meets the requirements and standards of the customer., • Generate, review and / or submit condition found reports, test and inspection plans, process control procedures, test documents and / or corrective action reports (CAR) as required to document customer requirements or non-conformances., • Inventories and maintain test equipment and gauges., • May be tasked to prepare presentation materials, teaching aids, handouts, etc. and conduct training when requested., • Perform audits and / or surveillance as needed or assigned., • Work independently to complete responsibilities., • Travel to work locations when required, both CONUS and OCONUS., • Will abide by all Safety Requirements., • Must have at least five (5) years' experience in NDT and Quality Control / Assurance., • Must have at least four (4) of the following NDT Certifications; VT, MT, PT, UTT, UT, Shear Wave, CPI/NACE Level II., • Must have excellent interpersonal, negotiation, communication and writing skills., • Must have strong organizational skills., • Must be able to get access to Government Facilities, • Must understand NAVSEA Standard Items and other Government Specifications., • Prefer related Department of Defense experience including direct experience with government customer relations., • Must be able to access Government facilities and be DBIDS eligible., • Sit, Stand, Walk, Bend, Squat, Climb, Reach, Push and Pull, Stoop, Crawl, Kneel, Balance, Lift and Carry various objects and equipment., • General shipyard/industrial environment. this type of work has physical demands that require frequent movement up to 65% of the time., • Lighting and temperature are adequate, and there is minimal exposure to hazardous or unpleasant conditions caused by noise, dust, etc. Hear, talk, and smell., • Specific vision abilities required by this job include close vision, peripheral vision, and the ability to adjust focus., • Work is generally performed within an office environment, with standard office equipment available, but also requires safe navigation and regular partnership with operations teams within shipyard/industrial environments., • A considerable amount of time is spent operating a personal computer., • Must be able to climb up and down stairs and spend time moving throughout the facility and onboard marine vessels.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Safely operates a heavy-duty truck to perform assigned duties on transfer routes. Performs pre- and post-trip inspections of assigned vehicle using standard DVIR (Driver Vehicle Inspection Report); notes all issues on DVIR form for corrective review/repair. Performs all duties as scheduled by Operat

Minimum 5 years in the field or in trade-related training in a design, construction inspection, construction materials engineering/testing, or other construction related field. Knowledge and experience with equipment used in construction inspection, and field testing of construction materials. Inspe

Minimum 3 years in the field or in trade-related training in a design, construction inspection, construction materials engineering/testing, or other construction related field. As a Construction Inspector, you will perform general construction inspection tasks to verify compliance standards codes, a

Epsilon Systems is seeking a Temporary Electrician III for the Modernization and Engineering division located in Portsmouth, VA. Summary: Under limited supervision, performs in a variety of complex electrical trade functions such as the installation, maintenance, or repair of electronics and/or electrical equipment for the generation, distribution, or utilization of electric energy onboard U.S. vessels/government installations. Responsibilities: \n • Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.\n, • Coordinates the efforts of other trades during an installation, modification or repair operation.\n, • Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.\n, • Performs and/or verifies mechanical alignments.\n, • Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).\n, • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.\n, • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Strictly adheres to corporate, federal, state and local safety regulations. Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Performs installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.\n, • Performs component and/or system troubleshooting to diagnose problems.\n, • Ensures that all requirements and detailed repair procedures and instructions are followed according to the company's work instructions, work packages, management guidance to complete the production operations.\n, • Works from blueprints, drawings, layouts, or other specifications, inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.\n, • Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments.\n, • Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.\n, • Troubleshoots motor controllers, control panels, and power distribution panels.\n, • Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.\n, • Assembles multi-pin connectors and fiber optic connections.\n, • Installs and seats brushes for AC and DC motors / generators.\n, • Completes inspection and resurfacing of commutators and slip rings.\n, • High school diploma or equivalent or vocational training.\n, • At least 5+ years' experience as a marine electrician.\n, • Understands and is familiar with NAVSEA Standard items.\n, • Follows NAVSEA Standard Items.\n, • Experienced in the performance of Energized Circuit work. Basic knowledge of AC and DC electrical theory, power generation, control and distribution.\n, • Qualified in a minimum of two of the following processes copper multi-pin connector assembly or repair. Fiber Optic connector assembly, repair. and testing/ troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.\n, • Communicates effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n\n, • Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)\n\n, • Ability to read, write, speak, and comprehend English.\n, • Ability to obtain and maintain National Security Clearance Level Secret.\n, • Ability to obtain access to military and government installations worldwide.\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Epsilon Systems is seeking a full time Weld Program Manager/NDT Level III Examiner in Portsmouth, VA. Summary: Prepares Welding, Brazing and NDT procedures for NAVSEA, AWS, ASME and ABS programs. Administers the Welder, Brazer and NDT training and qualification program. Subject Matter Expert (SME) in Welding, Brazing and Non-Destructive Testing associated with service craft, boat, ship, and submarine repair and modernization. Duties and Responsibilities: \n • Reports to QA Director for all assignments and supervision\n, • Administers/oversees the Welder, Brazer and NDT training, qualification and maintenance program\n, • Responsible for management of the Welding/Brazing/NDT Programs through subordinate supervisors/managers.\n, • Oversees and approves quality standards for structural and pipe material and equipment receiving, in-process and final inspection in accordance with company and contractual requirements.\n, • Inspects and monitors work performed on government and commercial work items, specializing in weld and coatings inspections.\n, • Reviews work packages prior to start-work for completeness, accuracy and compliance with technical specifications and customer requirements for welding, brazing and NDT.\n, • Performs in-process work surveillances and conducts final work-package review after work-completion for welding, brazing and NDT.\n, • Performs internal audits to monitor compliance with company procedures and performs external audits to evaluate supplier suitability for use.\n, • Reviews status of in-process rejections and recommends appropriate corrective action.\n, • Acts as a primary liaison with customers, vendors and various company departments for Welding/Brazing/NDT Program support.\n, • Advises management of test trends, returns, vendor performance and audit results and corrective action needed.\n, • Responsible for the training, motivation and discipline of assigned employees (when required).\n\n\n, • Writes and administers qualification exams for Welders, Brazers and NDT Programs.\n, • Develops quality and Workmanship standards for Welders, Brazers and NDT personnel.\n, • Monitors compliance with company Quality Management System, Workmanship standards and Customer requirements.\n, • Develops quality control and inspection procedures for inclusion in production Work-Packages and QA Work Books.\n, • Defines test standards and specifies test equipment and procedures.\n, • Reviews Technical Specifications and contract requirements to advise Bid Team of Welding, Brazing and NDT requirements to help evaluate company capabilities and support the Bid review\n, • Reviews Technical Specifications and contract requirements during Work Package and QA Work Book development to provide guidance for Welding, Brazing and NDT technical requirements, PCP development and qualification needs.\n, • Reviews Test and Inspection Plans (TIP) for structural/piping test and inspection requirements prior to release to production\n, • Reviews completed weld, brazing and NDT objective quality evidence (OQE) for accuracy and completeness prior to certification\n, • Provides Production technical guidance during accomplishment of projects.\n, • Conducts Quality Assurance inspections, Audit and Surveillances for the Welding/Brazing and NDT Programs.\n, • Works with customer QA representatives to coordinate inspection and acceptance activities.\n, • Reviews QA control requirements with customer representative to assure compliance with requirements.\n\n, • Weld/Structural Engineer Degree or equivalent (preferred)\n, • High school diploma or GED.\n, • 10 years of Management of Weld, Brazing and NDT Programs.\n, • 5 years waterfront Weld/Braze/NDT Program Management for NAVSEA contracts.\n, • 5 years waterfront Weld/Braze/NDT Program Management for Commercial contracts.\n, • NDT Level III Examiner Certification for VT, PT, MT and UT processes\n, • Frequent standing, sitting, walking, handling, feeling with hands, reaching with arms.\n, • Prolonged sitting and use of computer, (typing, keyboarding)\n, • Regular communication (hearing/speaking).\n, • Occasional stooping, kneeling, and crouching.\n, • Occasional lifting up to 20+ pounds.\n, • See details at close range (within a few feet of the observer).\n

Epsilon Systems Solutions, Inc. Mission Readiness Group has a job opportunity for a full time Electrician II (Hyperbarics) in Portsmouth, VA. Summary : Performs a variety of complex electrical trade functions such as the installation, maintenance, or repair of electronics and/or electrical equipment for the generation, distribution, or utilization of electric energy onboard U.S. vessels/government installations. Duties and Responsibilities: \n • Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.\n, • Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.\n, • Performs and/or verifies mechanical alignments.\n, • Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).\n, • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.\n, • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Strictly adheres to corporate, federal, state and local safety regulations. Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Performs installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.\n, • Performs component and/or system troubleshooting to diagnose problems.\n, • Ensures that all requirements and detailed repair procedures and instructions are followed according to the company's work instructions, work packages, management guidance to complete the production operations.\n, • Works from blueprints, drawings, layouts, or other specifications, inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.\n, • Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments.\n, • Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.\n, • Troubleshoots motor controllers, control panels, and power distribution panels.\n, • Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.\n, • Assembles multi-pin connectors and fiber optic connections.\n, • Installs and seats brushes for AC and DC motors / generators.\n, • Completes inspection and resurfacing of commutators and slip rings.\n, • High school diploma or equivalent or vocational training.\n, • At least 5 years' experience as a marine electrician.\n, • Understands and is familiar with NAVSEA Standard items.\n, • Follows NAVSEA Standard Items.\n, • Experienced in the performance of Energized Circuit work. Basic knowledge of AC and DC electrical theory, power generation, control and distribution.\n, • Qualified in a minimum two of the following processes copper multi-pin connector assembly or repair. Fiber Optic connector assembly, repair. and testing/ troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.\n, • Communicates effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n, • Ability to read, write, speak, and comprehend English.\n, • Ability to obtain and maintain National Security Clearance Level Secret.\n, • Ability to obtain access to military and government installations worldwide.\n, • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n, • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Epsilon Systems is seeking a Temporary Electrician Specialist for the Modernization and Engineering division located in Portsmouth, VA. Summary: Requires no supervision and is an expert in all tasks and qualifications required as an Electrician. Performs electrical and electro mechanical repairs. Assist with conducting system grooms and checkouts, and configuration validation. Prepare and install systems alterations. Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required. Work outside specific trade discipline is required. Duties & Responsibilities • Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities. In the absence of the Foreman, he/she will take a lead role on the job.\n\n, • Strict adherence to corporate, federal, state and local safety regulations and ensuring that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Ensures all tools listed on the "Required Tools List" are available for use within two weeks of employment.\n, • Equipment other than those required by the "Required Tool List" may be checked out from the Tool Room. Financially responsible for all tools checked out from the Tool Room. Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Facilities Foreman in accordance with Process Instruction.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Coordinates the efforts of other trades during an installation, modification or repair operation.\n, • Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.\n, • Performs and/or verifies mechanical alignments.\n, • Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).\n, • Performs component and/or system troubleshooting to diagnose problems.\n, • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.\n, • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).\n, • Prepares and installs equipment or system alterations in accordance with the technical specifications.\n, • Leads and perform shipboard work for system/component evaluations.\n, • High school diploma or equivalent or vocational training.\n, • At least 10 years' experience as a marine electrician.\n, • Understand and is familiar with NAVSEA Standard items.\n, • Experienced in the performance of Energized Circuit work.\n, • Advanced knowledge of AC and DC electrical theory, power generation, control and distribution.\n, • Qualified in a minimum of two of the following processes: copper multi-pin connector assembly or repair, Fiber Optic connector assembly, Fiber Optic repair and testing/troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.\n, • Ability to communicate effectively, and work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n, • Ability to read, ability to write, ability to speak, and ability to comprehend English.\n, • Must be able to follow complex repair procedures and instructions required to complete all electrical production operations\n, • Must be able to expertly perform installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.\n, • Must be able to accurately perform component and/or system troubleshooting to diagnose problems first time thorough.\n, • Must be able to assist with the performance of on-site electrical service for system grooms and checkouts, minor repairs, connectorization, and system configuration validation.\n, • Ability to reason and find solutions.\n\n, • Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)\n\n, • Ability to obtain access to military and government installations and private shipyards worldwide.\n, • Ability to travel required.\n\n ADA Notations: Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Work conditions vary from indoors to outdoor, very hot to very cold. Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Requisition Number: 24940 Required Travel: 11 - 25% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $62,000.00 - $71,825.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary Join a team that builds and maintains the vessels that keep America's armed forces moving. The International Services Support (ISS) team is currently looking for a Maritime Watercraft Mechanic SME. The selected candidate will perform corrective and preventative maintenance mechanical operation, troubleshooting, repair, maintenance, and assessment in support of Army Watercraft tasks. This is a full-time position, located in Norfolk, VA. What You Will Do • Providing field service representatives to perform minor equipment modification, installation of equipment and maintenance of SOF equipment at the Echelon II level and below., • The types of specialized equipment to be supported include but is not limited to: Combatant Craft variants (CCA, CCH, CCM), Special Operations Craft-Riverine (SOC-R), Rigid-Hull Inflatable Boats (RHIBs), Maritime Combatant Craft Aerial Delivery System, SEAL Delivery Vehicle and dry deck shelter, ground mobility vehicles and other tactical vehicles. Various dive equipment and weapons that are standard issued to NSW operators are also considered equipment., • May train and provide instruction on the various equipment and/or platforms., • Perform corrective and preventative maintenance mechanical operation, troubleshooting, repair, and material assessment of all equipment and boat's equipment in accordance with OEM specifications., • Serves as the primary point of contact (POC) for problem resolution and liaison with Government., • Ensures contract deliverables are accurately and timely submitted., • Make decisions relating to Expeditionary Equipment Readiness Services Support program. \n What You Must Have • High School education, or Trade School or equivalent, and 8 years of related experience, to include specific systems expertise., • Must provide own hand tools as designated per trades specialty., • Must be able to obtain and maintain a DoD Secret security clearance., • Must be able to obtain and maintain base access., • Must have experience in the operation, maintenance, repair, or inspection of marine propulsion and/or power generation systems., • Must have experience as an Original Equipment Manufacturer (OEM) certified mechanic., • Must have experience working with Marine midrange and heavy-duty Cummins diesel engines. \n Preferred: Bonus Points For • Previous experience with Cummins Diesel Engines: 4021564-Operation and Maintenance Manual QSB5.9 Marine Engines; 4021416-Troubleshooting and Repair Manual ISB, ISBe2, ISBe3, ISBe4, QSB4.5, QSB5.9, QSB6.7, ISC, QSC8.3, ISL, ISLe3, ISLe4, and QSL9, CM850 Electronic Control System; 4021271-Service Manual ISBe, ISB, and QSB (Common Rail Fuel System); 4022081-Master Repair Manual SmartCraft™ Marine Control System, Hamilton Waterjet Marine Propulsion Units and Twin Disc Marine Gear Transmission., • At least one (1) year of experience in aluminum and glass reinforced plastic (GRP) hull repair at the depot level., • A current, active DoD Secret Security Clearance or higher., • Previous experience as a factory certified mechanic on a Suzuki DF250APXX outboard engines.\n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards,under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description GENERAL SUMMARY: Performs electrical work on U.S. Navy shore facilities, waterborne vessels, surface ships and/or submarines. Tasks will be related to inspections, repairs, modernization and/or alterations. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. POSITION LOCATION: Norfolk, VA DUTIES AND RESPONSIBILITIES: Other duties may be assigned. • Performs troubleshooting and/or testing of various electrical, systems, circuits, controls, instruments and equipment, onboard military shore facilities, Navy ships/vessels to include submarines and/or ship's components and documents test requirements., • Conducts voltage and other electrical safety checks., • Performs connections/hook-ups to panels, switches, and boxes., • Assists with cleaning up work area (removing debris from work area)., • Employees may be required to travel for work to other locations\n\n REQUIREMENTS: • 1-4 years of experience in shipboard electrical installations; or completion of a formal related course of study through either a community college, technical or trade school, military training, formal company training program or an apprenticeship program., • Basic experience with Voltmeters, Ammeters, Ohmmeters, Megohmmeters, (ET1 only) Light Loss meters, (ET1 only) Optical Time Delay Reflectometers (OTDRs); and general hand tools, such as screwdrivers, wire strippers, crimp tools, wrenches, knives, pliers, drills, and saws., • Able to read and interpret blueprints, sketches, wiring diagrams, written technical instructions and manuals., • Able to read and understand material safety data sheets (SDS)., • Perform basic troubleshooting and/or testing of various electrical, systems, circuits, controls, instruments and equipment., • Basic understanding of electrical theory., • Able to correctly wire simple devices, such as power/lighting panels, power/lighting distribution boxes, small terminal boxes, outlet receptacles, etc., with minimal supervision., • Graduate of a NAVSEA approved Cableway Installation and Inspection course., • (ET1 only) Full competency in Navy shipboard fiber optic methods and is currently, or has previously been, certified under NAVSEA Drawing 8477552B, which meets the requirements of NAVSEA Standard Item 009-123 and MIL-STD-1678., • Must be able to perform work autonomously, with minimal guidance, and have an expectation to assist other job requirements beyond the role of E1/ET1., • Must be prepared to perform an unassisted thorough practical demonstration of skills that may include tool and part identification, mock assembly and testing.\n EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number ELE-25-00019 This position is currently accepting applications.

Epsilon Systems is seeking a full time Electrician Specialist for the SRS division located in Portsmouth, VA. Summary: Requires no supervision and is an expert in all tasks and qualifications required as an Electrician. Performs electrical and electro mechanical repairs. Assist with conducting system grooms and checkouts, and configuration validation. Prepare and install systems alterations. Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required. Work outside specific trade discipline is required. Duties & Responsibilities • Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities. In the absence of the Foreman, he/she will take a lead role on the job.\n\n, • Strict adherence to corporate, federal, state and local safety regulations and ensuring that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Ensures all tools listed on the "Required Tools List" are available for use within two weeks of employment.\n, • Equipment other than those required by the "Required Tool List" may be checked out from the Tool Room. Financially responsible for all tools checked out from the Tool Room. Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Facilities Foreman in accordance with Process Instruction.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Coordinates the efforts of other trades during an installation, modification or repair operation.\n, • Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.\n, • Performs and/or verifies mechanical alignments.\n, • Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).\n, • Performs component and/or system troubleshooting to diagnose problems.\n, • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.\n, • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).\n, • Prepares and installs equipment or system alterations in accordance with the technical specifications.\n, • Leads and perform shipboard work for system/component evaluations.\n, • High school diploma or equivalent or vocational training.\n, • At least 10 years' experience as a marine electrician.\n, • Understand and is familiar with NAVSEA Standard items.\n, • Experienced in the performance of Energized Circuit work.\n, • Advanced knowledge of AC and DC electrical theory, power generation, control and distribution.\n, • Qualified in a minimum of two of the following processes: copper multi-pin connector assembly or repair, Fiber Optic connector assembly, Fiber Optic repair and testing/troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.\n, • Ability to communicate effectively, and work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n, • Ability to read, ability to write, ability to speak, and ability to comprehend English.\n, • Must be able to follow complex repair procedures and instructions required to complete all electrical production operations\n, • Must be able to expertly perform installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.\n, • Must be able to accurately perform component and/or system troubleshooting to diagnose problems first time thorough.\n, • Must be able to assist with the performance of on-site electrical service for system grooms and checkouts, minor repairs, connectorization, and system configuration validation.\n, • Ability to reason and find solutions.\n\n, • Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)\n\n, • Ability to obtain access to military and government installations and private shipyards worldwide.\n, • Ability to travel required.\n\n ADA Notations: Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Work conditions vary from indoors to outdoor, very hot to very cold. Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Type of Requisition: Pipeline Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: Field Service and Support Job Qualifications: Skills: Electrical Installations, Electrical Systems, Motor Repair Certifications: None Experience: 2 + years of related experience US Citizenship Required: Yes Job Description: Marine Electrician (US Navy Submarine) Onsite Locations: Portsmouth Naval Shipyard Kittery, Maine Pearl Harbor Naval Shipyard Pearl Harbor, Hawaii Kings Bay Naval Shipyard Kings Bay, Georgia Norfolk Naval Shipyard Portsmouth, Virginia Bremerton Naval Shipyard Bremerton, Washington Make meaningful contributions that fuel critical outcomes for some of the most complex government, defense, and intelligence projects. Join GDIT as a Marine Electrician (US Navy Submarine) for a career where your growth is just as important as the mission you support. The SUB AIT program supports the In-Service Attack Submarines Program Office (PMS 392) under Program Executive Office Attack Submarines (PEO SSN) to achieve optimal submarine operational readiness by providing /production support, component repairs and technical support to accomplish repair, maintenance, removal/installation, troubleshooting and associated testing for Chief of Naval Operations (CNO) submarine maintenance availabilities. The efforts associated with this program will help restore and maintain the material condition and modernization of the fast attack submarines of the United State Navy. Requirements \n • 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned.\n, • HS/GED\n, • Must be US Citizen.\n, • Must be able to obtain and maintain Secret Clearance\n\n Personnel shall have at least 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned. Personnel shall have DOD type "final" security clearance (DISCO authority with a minimum of a confidential clearance status). At a minimum, all personnel shall be United States citizens and shall possess a final favorable adjudicated tier 3 investigation. Contractor personnel must have a Department of Defense Personnel Security Clearance (PCL) at the confidential level or higher. Marine Electricians Non-Nuclear Electrical Work (TSD EW): Install, modify, repair, troubleshoot and test various electrical and electronics systems, circuits, controls, instruments and equipment. Also includes installation of wire ways and cabling. Marine Electricians Generator/Motor Repair, Electrical (TSD E4): Shop work such as disassembly, inspection, test, cleaning, varnishing, baking, and reassembly, and shipboard investigate/repair generators, motors, and transformers electrical component. Marine Electricians Topside Electrical Work (TSD TZ): Remove, Disassemble, inspect, repair, adjust, test, and install external electrical systems cabling in tanks, voids, and sails. Includes installation of hull fittings, penetrators, and tank level indicators. Marine Electrician Tasks TSD EW (Non-nuclear Electrical Work): Remove, modify, and install electrical equipment Remove, install, groom, and band wireways and cabling Pack and unpack equipment and bulkhead penetrations Repair electrical equipment and cabling Utilize electrical checks to test and troubleshoot electrical systems Disconnect, groom, and reconnect wiring TSD E4 (Generator/Motor Repair, Electrical): Disassemble and replace motor and generator components Troubleshoot, modify and adjust motors and generators Balance motor and generator components Insulate using mechanical and dip methods Stone and bevel commutator and slip rings Assemble motor and generator components TSD TZ (Topside Electrical Work): Remove, modify, and install electrical equipment Disconnect, remove, install, groom, band, and reconnect wireways and cabling Utilize electrical checks to test electrical systems Remove, install, and test hull fittings, penetrations, and tank level indicators Marine Electrician Skill Requirements TSD EW (Non-nuclear Electrical Work): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD EW. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). TSD E4 (Generator/Motor Repair, Electrical): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD E4. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). TSD TZ (Topside Electrical Work): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD TZ. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. • Growth: AI-powered career tool that identifies career steps and learning opportunities, • Support: An internal mobility team focused on helping you achieve your career goals, • Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off, • Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. #SubAIT #hireshipyardcareersgdit The likely hourly rate for this position is between $39.56 - $53.52. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 50-75% T elecommuting Options: Onsite Work Location: USA VA Portsmouth Additional Work Locations: USA GA Kings Bay, USA HI Pearl Harbor, USA ME Bath, USA WA Bremerton Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

1st Class Pipe Welder Purpose: Colonna's Shipyard is seeking a 1st Class Pipe Welder to support day shift operations in our Shipyard in Norfolk, VA. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment., • Select and execute best method to prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter and to clean, degrease, deoxidize, or desmut weld joint or work piece, using wire brush, portable grinder, or solvent clean/chemical bath, • Weld completion in flat, horizontal, vertical, or overhead positions for at least three base materials using a wide variety of processes., • Fabricate brackets, panels, complex beams and shape structures., • Plumb transverse bulkheads and panels to fabricate enclosures, complex weldments, shapes, plates, simple and complex parts from a drawing or sketch., • Operate and set up of the following equipment; hydraulic jacks and pumps, chain falls, come a longs, Steamboat Ratchets, and slings., • Expertly repair base metal products and completed welds by adding the minimum amount of weld metal or heat and the minimum amount of grinding/smoothing to meet job specification., • Also perform air-arc back gouging and oxy-acetylene torching (e.g. brazing, cutting, or pre-heating), GTAW (Gas Tungsten Arc Welding), and pipe welding, pipe flange and socket welding; as well as qualify to perform either flux cored inner shield welding, weld overlay cladding, automated back gouging, plasma back gouging or any combination thereof., • Mark or tag material with proper job number, piece marks, and other identifying marks as required and always mark completed welds with welder number., • Perform single pass 5/16-inch minimum fillet welds in all positions using FCAW on carbon steel and at least ¼-inch single-pass fillets on two other materials., • Supervise set up to perform welding in accordance with applicable WPS all welding equipment such as: wire feeders, Sub-arc tractors, Bug O's, Power sources, etc., • Clean torches and connect/lay-out cables and whips to optimize performance and perform routine maintenance on all equipment., • Recommend WPSs and WPS upgrades required for a job; when assigned, produces or supervises production, documentation, and testing of PQRs and WPQs., • Reliable, leads by example; trains less-killed welders, enforces good workmanship and safe welding practices throughout the work area; identifies gaps in weld process controls and weld process surveillance inspections and recommends corrective action., • Perform comprehensive workmanship inspection, and when directed those of others, of all welds grinding and joint preparation for NDT processes as applicable; observe QA/NDT hold points as applicable., • Complete standard dimensional computations/ Devise bracing and weld sequencing steps to maintain tolerances and minimize distortions., • Must have at least seven (7) years of Pipe Welding experience., • Must have experience working in physically demanding environments., • Prefer certifications in all positions using the SMAW and GTAW welding processes., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Amee Bay, LLC, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking a QA & NDT Level II Technician to support our operations on Navy contracts, with a focus on Quality Assurance activities in Chesapeake, VA. Position Responsibilities: \n • Manage and support QA activities related to Navy contracts, ensuring full compliance with Navy specifications (e.g., MIL-STD, NAVSEA, MIL-PRF) and other relevant industry standards.\n, • Conduct detailed inspections and audits of products, processes, and systems in accordance with military standards, ensuring the adherence to quality specifications and requirements.\n, • Review and analyze technical documentation, blueprints, and engineering drawings to assess compliance with project requirements and quality standards.\n, • Develop and review quality control procedures for naval projects, ensuring all quality metrics, tests, and inspections meet the specific standards for Navy contracts.\n, • Collaborate with Navy engineers, contractors, and subcontractors to ensure effective communication and alignment with quality expectations for all deliverables.\n, • Ensure all materials, components, and systems meet the stringent military-grade quality requirements for operational readiness and long-term reliability.\n, • Monitor and track non-conformances, initiating corrective actions to address quality issues and ensuring compliance with Navy regulations.\n, • Lead quality reviews and inspections of materials, systems, and processes used in shipbuilding, submarine construction, and military equipment maintenance and repair.\n, • Oversee and assist with the preparation of quality assurance documentation including test plans, inspection reports, and final certification reports.\n, • Conduct root cause analysis and support continuous improvement initiatives to enhance quality assurance processes, mitigate risks, and optimize performance.\n, • Ensure the calibration and maintenance of all QA testing and inspection equipment in accordance with Navy and military standards.\n, • Perform supplier quality audits to ensure third-party vendors meet the necessary quality requirements for materials and components.\n, • Provide training and mentoring to junior QA personnel and assist in the development of quality assurance programs for Navy-related projects.\n, • US Citizen.\n, • Must be able to obtain and maintain an Active Secret Clearance; Candidates currently possessing an Active Secret Clearance are preferred.\n, • High School Diploma or Equivalent.\n, • QA experience with a focus on Navy contracts or military-related projects, ideally within shipbuilding, defense systems, or naval vessel maintenance.\n, • Minimum of 5 years of experience in a quality assurance role with hands-on experience in the defense industry.\n, • Familiarity with military standards, including NAVSEA, MIL-STD, and other DoD quality specifications.\n, • Strong understanding of quality management systems (QMS), ISO standards, and relevant industry codes (e.g., ASME, ASTM, API).\n, • Ability to interpret and evaluate engineering drawings and technical specifications to ensure quality compliance.\n, • Proficiency with QA software and reporting tools used for tracking non-conformances, inspections, and audit documentation.\n, • Knowledge of root cause analysis (RCA), failure mode analysis, and the corrective action process.\n, • Excellent written and verbal communication skills, including the ability to prepare technical reports and quality assurance documentation for Navy contracts.\n, • Ability to work independently and within a team to achieve military and project-specific quality objectives.\n, • Ability to work in shipyard environments, confined spaces, and other physically demanding settings typical of Navy-related projects.\n, • Ability to lift and carry equipment up to [insert weight].\n Apply online at: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Epsilon Systems is seeking a Temporary Electrician II for the Modernization and Engineering division located in Portsmouth, VA. Summary : Performs a variety of complex electrical trade functions such as the installation, maintenance, or repair of electronics and/or electrical equipment for the generation, distribution, or utilization of electric energy onboard U.S. vessels/government installations. Duties and Responsibilities: \n • Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.\n, • Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.\n, • Performs and/or verifies mechanical alignments.\n, • Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Instructions.\n, • Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).\n, • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.\n, • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Strictly adheres to corporate, federal, state and local safety regulations. Ensures that all Epsilon Systems Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Performs installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.\n, • Performs component and/or system troubleshooting to diagnose problems.\n, • Ensures that all requirements and detailed repair procedures and instructions are followed according to the company's work instructions, work packages, management guidance to complete the production operations.\n, • Works from blueprints, drawings, layouts, or other specifications, inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.\n, • Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments.\n, • Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.\n, • Troubleshoots motor controllers, control panels, and power distribution panels.\n, • Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.\n, • Assembles multi-pin connectors and fiber optic connections.\n, • Installs and seats brushes for AC and DC motors / generators.\n, • Completes inspection and resurfacing of commutators and slip rings.\n, • High school diploma or equivalent or vocational training.\n, • At least 5 years' experience as a marine electrician.\n, • Understands and is familiar with NAVSEA Standard items.\n, • Follows NAVSEA Standard Items.\n, • Experienced in the performance of Energized Circuit work. Basic knowledge of AC and DC electrical theory, power generation, control and distribution.\n, • Qualified in a minimum two of the following processes copper multi-pin connector assembly or repair. Fiber Optic connector assembly, repair. and testing/ troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.\n, • Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)\n, • Communicates effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n, • Ability to read, write, speak, and comprehend English.\n, • Ability to obtain access to military and government installations worldwide.\n, • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n, • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Type of Requisition: Pipeline Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: Field Service and Support Job Qualifications: Skills: Electrical Installations, Electrical Systems, Motor Repair Certifications: None Experience: 2 + years of related experience US Citizenship Required: Yes Job Description: Marine Electrician (US Navy Submarine) Onsite Locations: Portsmouth Naval Shipyard Kittery, Maine Pearl Harbor Naval Shipyard Pearl Harbor, Hawaii Kings Bay Naval Shipyard Kings Bay, Georgia Norfolk Naval Shipyard Portsmouth, Virginia Bremerton Naval Shipyard Bremerton, Washington Make meaningful contributions that fuel critical outcomes for some of the most complex government, defense, and intelligence projects. Join GDIT as a Marine Electrician (US Navy Submarine) for a career where your growth is just as important as the mission you support. The SUB AIT program supports the In-Service Attack Submarines Program Office (PMS 392) under Program Executive Office Attack Submarines (PEO SSN) to achieve optimal submarine operational readiness by providing /production support, component repairs and technical support to accomplish repair, maintenance, removal/installation, troubleshooting and associated testing for Chief of Naval Operations (CNO) submarine maintenance availabilities. The efforts associated with this program will help restore and maintain the material condition and modernization of the fast attack submarines of the United State Navy. Requirements \n • 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned.\n, • HS/GED\n, • Must be US Citizen.\n, • Must be able to obtain and maintain Secret Clearance\n\n Personnel shall have at least 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned. Personnel shall have DOD type "final" security clearance (DISCO authority with a minimum of a confidential clearance status). At a minimum, all personnel shall be United States citizens and shall possess a final favorable adjudicated tier 3 investigation. Contractor personnel must have a Department of Defense Personnel Security Clearance (PCL) at the confidential level or higher. Marine Electricians Non-Nuclear Electrical Work (TSD EW): Install, modify, repair, troubleshoot and test various electrical and electronics systems, circuits, controls, instruments and equipment. Also includes installation of wire ways and cabling. Marine Electricians Generator/Motor Repair, Electrical (TSD E4): Shop work such as disassembly, inspection, test, cleaning, varnishing, baking, and reassembly, and shipboard investigate/repair generators, motors, and transformers electrical component. Marine Electricians Topside Electrical Work (TSD TZ): Remove, Disassemble, inspect, repair, adjust, test, and install external electrical systems cabling in tanks, voids, and sails. Includes installation of hull fittings, penetrators, and tank level indicators. Marine Electrician Tasks TSD EW (Non-nuclear Electrical Work): Remove, modify, and install electrical equipment Remove, install, groom, and band wireways and cabling Pack and unpack equipment and bulkhead penetrations Repair electrical equipment and cabling Utilize electrical checks to test and troubleshoot electrical systems Disconnect, groom, and reconnect wiring TSD E4 (Generator/Motor Repair, Electrical): Disassemble and replace motor and generator components Troubleshoot, modify and adjust motors and generators Balance motor and generator components Insulate using mechanical and dip methods Stone and bevel commutator and slip rings Assemble motor and generator components TSD TZ (Topside Electrical Work): Remove, modify, and install electrical equipment Disconnect, remove, install, groom, band, and reconnect wireways and cabling Utilize electrical checks to test electrical systems Remove, install, and test hull fittings, penetrations, and tank level indicators Marine Electrician Skill Requirements TSD EW (Non-nuclear Electrical Work): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD EW. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). TSD E4 (Generator/Motor Repair, Electrical): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD E4. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). TSD TZ (Topside Electrical Work): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD TZ. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. • Growth: AI-powered career tool that identifies career steps and learning opportunities, • Support: An internal mobility team focused on helping you achieve your career goals, • Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off, • Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. #SubAIT #hireshipyardcareersgdit The likely hourly rate for this position is between $39.56 - $53.52. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 50-75% T elecommuting Options: Onsite Work Location: USA VA Portsmouth Additional Work Locations: USA GA Kings Bay, USA HI Pearl Harbor, USA ME Bath, USA WA Bremerton Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Amentum is seeking a Submarine Engineering Technician IV to join our Norfolk, VA team to support MARMC code 274. This role focuses on the submarine Towed Array Handling System (TAHS). Essential Responsibilities: • Provide technical assistance, industrial support, or both to evaluate, troubleshoot, test, repair, and provide technical oversight and guidance to correct equipment deficiencies of the TAHS equipment on submarines., • Provide technical oversight for towed array on-load/off-load evolutions as it relates to the Towed Array Handling System (TAHS)., • Perform TB-16 stowage tube and guide tube inspections for TAHS variants., • Provide technical and logistical assistance via telephone, e-mail, chat, and naval message for both deployed and local submarines in matters associated with TAHS equipment., • Provide onboard maintenance training to the ship's force personnel during technical assistance visits to improve proficiency in the operation and maintenance of TAHS equipment towed systems., • Provide a written Technical Assistance Visit Report (TAVR) and TAVR worksheet data upon completion of FTA., • Provide onboard support for the towed systems' portion of TSRA, including the Pre/Post-Deployment Maintainability Assessment (PDMA)., • Provide management and coordination support for Total Ship Readiness Plan (TSRP), planning and process improvement initiatives, activities, semi-annual TSRP conferences, and meetings. This includes preparation and development of briefs, presentations, on-site preparation and participation, and follow-up activities, including tracking and accomplishment of action items., • Provide inventory control and a periodic NAVSEA S&TE calibration report for NAVSEA special S&TE utilized to support MARMC and other RMCs' towed systems activities., • Experience with fabricating, procurement, repairing, refurbishing, maintaining, and calibrating special S&TE., • Knowledge of inspecting, maintaining, repairing, and refurbishing hydraulic filter rigs annually., • Knowledge of testing, distributing, repairing, and maintaining the improved Towed Array Power Supply Dummy Load boxes., • Provide onboard technical assistance for conducting ship checks and AIT/modernization., • Maintain and track towed systems S&TE for use during tech assists, inspections, assessments, and grooms., • Experience with fabricating, procuring, repairing, refurbishing, maintaining, calibrating, packaging, shipping, and inventorying fleet S&TE. Includes inboard, outboard, and inter-connecting cables, connectors, pins, fittings, molds, and materials., • Experience in developing, reviewing, and providing comments on engineering change proposals, data, documentation, and drawings for special S&TE., • Experience in performing the following:, • Generate and submit Formal Work Package (FWP) IAW NAVSEA TS9090-310 and the JFMM to MARMC C274., • Procure all required material., • Draft Plan of Action and Milestones (POA&M) in Microsoft Project electronic format and deliver to MARMC C274., • Provide support for the AIT Government Lead with a SHIPALT walk-through and/or close out with the respective submarine., • Experience in performing surface refurbishment of Rim Drive Drum Dual Groove Pair to the tolerances (750-1000 micro inch range) noted on NAVSEA Dwg. No. 9818874., • Provide engineering and technical support for OA-9070 pinch roller assemblies either pier side or during a Selected Restricted Availability (SRA). Tasking can include installation, removal, inspection, cleaning, and testing., • Knowledge in performing PRA maintenance, inspection, and refurbishment IAW the latest revision and change of MS 5850-081-150 (LA Class) and MS 5950-081-122 (VA Class). Contractor shall have the capability to complete and ship within (7) business days of receipt. With structural, base metal repairs, add three (3) days to the complete and ship requirement for a total of ten (10) days after receipt., • Knowledge of procuring, fabricating, inspecting, packaging, shipping, inventorying, and maintaining items required to perform maintenance, inspection, and refurbishment. Items include compensator, PRA rollers, springs, roller arms, mounting brackets, frames, foundations, fasteners, parts, material, S&TE, and similar., • Provide engineering and technical support for OA-9070/B/BQQ series TBDD assemblies, either pier side or during an SRA. It can include installation, removal, inspection, cleaning, and testing., • Experience with performing TBDD maintenance, inspection, and refurbishment IAW the latest revision and change of MS 5850-081-219 (LA Class). Contractor shall have the capability to complete and ship within (7) business days of receipt. With structural, base metal repairs, add three (3) days to the complete and ship requirement for a total of ten (10) days after receipt., • Provide pre-refurbishment TBDD inspection report for Government review and approval of each TBDD refurbishment., • Knowledge in procuring, fabricating, inspecting, packaging, shipping, inventorying, and maintaining items required to perform maintenance, inspection, and refurbishment. Items include TBDD pulleys, belts, tensioner components, mounting brackets, frames, foundations, fasteners, parts, material, S&TE, and similar.\n Minimum Requirements: • Must have an Active Secret US Government Clearance. Note: US Citizenship is required to maintain an Active Secret Clearance., • Six (6) years full-time technical experience in the design, installation, test, and/or repair of mechanical/electrical/electronic or mechanical systems/equipment., • Must have experience with the following systems:, • OA-9070 A/B/E Variants, • OK 276 ( )/A/B/C/D/T Variants, • OK-418, • OK-542 /A, • OK-634\n Preferred Qualifications: • Four (4) years full-time engineering experience in the operation, maintenance, installation, test, and/or repair of submarine mechanical and or electrical, and or electronic systems/equipment., • Experience in evaluating the material condition of ship systems and implementing corrective action\n Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Epsilon Systems is seeking a Temporary Shipfitter III for Portsmouth, VA. Summary: Repairs, modifies or overhauls various types of equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision. Responsibilities: \n • Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Insures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Strictly adheres to safety, quality standards.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Insures all tools listed on the "Required Tools List" are available for use within two weeks of your employment.\n, • Insures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.\n, • Performs as Team Member, cooperating with the efforts of other trades during an installation, modification or repair operations.\n, • Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.\n, • Performs and/or verifies mechanical alignments.\n, • Insures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Performs installation, repair, overhaul or modification in place or in shop to mechanical systems and components (e.g.; Valves, Actuators, Cylinders, Accumulators, Pumps, Launchers etc.).\n, • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.\n, • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).\n, • Assists in rigging when necessary.\n, • High school diploma/equivalent/Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard\n, • 5 years' experience.\n, • Has knowledge of the trade qualifications and performs as a level III Outside Machinist.\n, • Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.\n, • Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting).\n, • Must have the ability to read, understand, interpret and work from blueprints, sketches and specifications.\n, • Must have experience in the disassembly, repair, installation, testing and inspection of ship machinery such as, but not limited to, propelling machinery, pumps, valves, launchers, discharge machinery, ventilation equipment, steering gear, evaporators, heaters, condensers, propulsion plants, torpedo tubes, shutter doors, antennae mast mechanical groups.\n, • Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators\n, • Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment.\n, • Must have knowledge of rigging equipment and be able to identify damaged and/or worn equipment. Must be able to lead rigging teams in medium to larger rigging tasks.\n, • Assists in rigging evolutions when necessary.\n, • Communicates effectively\n, • Works independently or in a group. Requires no supervision/oversight.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n, • Ability to read, write, speak, and comprehend English.\n, • Ability to obtain and maintain National Security Clearance Level Secret.\n, • Ability to obtain and maintain base access to assigned government/military/private installations.\n, • Requires walking, reaching, sitting and concentration in the presence of occasional noise.\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n, • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

MARINE PIPEFITTER (1st Class Pipefitter) LOCATIONS: NORFOLK NAVAL SHIPYARD (NNSY) PORTSMOUTH NAVAL SHIPYARD - KITTERY, ME Mills Marine and Ship Repair, LLC (Mills Marine) is currently seeking an individual to support Touch Labor at Norfolk Naval Shipyard (NNSY). Clearance Requirement: Must be a US citizen with a DOD final Secret security clearance. Essential Functions and Responsibilities: 1. Have the ability to read and interpret and apply blueprints., 2. Have the ability to perform shop mathematical calculations involving geometry to lay out angles, arcs and circles., 3. Be capable of inspecting, testing and removing, installed piping and associate valves, hardware and hangers., 4. Have knowledge of how equipment and systems are installed and operated as well as the ability to plan work, layout and modify or repair new and/or existing valves and piping, 5. Have knowledge of brazing procedures and how various metals and alloys of steel, high-strength alloy steels, aluminum, cast iron, nickel, monel, brass, copper, bronze react to different brazing processes and techniques., 6. Shall be capable of installing, repairing or modifying high- and low-pressure water, steam, gas, oil, or other high- and low-pressure pipes or fitting., 7. Shall be possess the knowledge, skills, and abilities to fabricate and assemble various piping systems (P-1, P-2, & P-3 as defined in S9074-ARGIB-010/278) of differing metal which includes cutting, bending, shaping, alignment, and mounting of piping systems on U.S. Naval Surface Ships and Submarines., 8. Shall be trained and qualified to the workmanship requirements for piping installation and fit up as prescribed in Welded Joint Design (MIL-STD 22D), Requirements for Fabrication Welding and Inspection, and Casting Inspection and repair for Machinery, Piping and Pressure Vessels {S9074-AR-GIB-010/278), NAVSEA Standard Item 009-12, and NSTM Chapter 505., 9. Prior to starting work, personnel shall be required to demonstrate proficiency by performing the following tasks under government supervision: • End prep and fit-up for a P-14 socket joint, fit-up one joint in accordance with the S9074AR-GIB-010/278 to demonstrate the knowledge and ability to accomplish the work-specific in the contract SOW. During end prep and fit-up, the personnel will produce a P-14 joint that meets the requirements of the S9074-AR-GIB-010/278. \n, • Measure: must be able to perform the measurements of inside and outside diameters, socket depth, and put out (withdrawal) for sockets using micrometers, dial calipers, and a six-inch depth, along with scribe lines, reference lines. \n, • Operate: must have knowledge and skills to operate pneumatic grinders. \n, • End prep and Fit-up: shall demonstrate proper cleaning, prep, and fit-up techniques for P-14 socks, fillet weld. \n Education: The Marine Electrician position requires a minimum of a high school diploma and/or successful completion of a related trade or industrial school. Experience: The Marine Pipefitter position requires a minimum of four (4) years of verifiable experience in heavy industrial applications i.e., commercial vessels or nuclear power plants, which shall include a minimum of two (2) years' work experience on U.S. Navy ships/vessels. Trade Training: Completed a formal course of study in the assigned trade through either a community college, technical or trade school, military training, formal company training program or an apprentice program. Must be trained in typical trade-related precision measurement instruments, such as micrometers, depth gauges and calipers while performing close tolerance work. Trade Specific Technical Standards: MIL-STD-22D, S9074-AR-GIB-010/278, NAVSEA Standard Item 009-12, NSTM chapter 505 Required Trade Training: Assembly & Inspection of Flareless Fittings, Flange Joint Makeup, Union Joint Makeup, Hanger Installation, Precision Measurement Instruments and Torque Wrench Usage Trade Skills: 1. Capable and knowledgeable of troubleshooting/testing various electrical, systems, circuits, controls, instruments and equipment, onboard Navy ships/vessels to include submarines and/or ship's components and able to document test requirements., 2. Knowledge and ability to proficiently use various types of electrical and electronic measuring devices that include voltmeters, amp meters, ohmmeters, power analyzers, as well as possess the ability and knowledge to disconnect /reconnect and perform Initial Voltage Verification of electrical equipment., 3. Working knowledge of electrical trade mathematics and formulas in order to calculate voltage, amperes and resistance requirements and to determine size and types of material, including controls, switches, distribution panels, fuses, cable and conduit size when determining appropriate power source., 4. Working knowledge of electrical trade mathematics and formulas in order to calculate voltage, amperes and resistance requirements and to determine size and types of material, including controls, switches, distribution panels, fuses, cable and conduit size when determining appropriate power source., 5. Ability to read and interpret blueprints, sketches, written technical instructions and manuals, make working diagrams, circuits, electrical systems, circuits, circuits, circuits, circuits, circuits, controls, instruments and equipment. This position description represents a summary of the major components and requirements of the outlined job. Other duties and responsibilities may be assigned or required as business needs dictate. Questions regarding this description should immediately be addressed to the department manager or to Human Resources. Benefits: In addition to competitive pay, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with Mills. Benefits are subject to employment eligibility. Benefits: Full-time employment • Paid accrued vacation time., • Health, dental, and vision insurance, • Company-paid life and accidental insurance with Supplemental Coverage Option as well, • Legal Resource benefit, • 401K Plan, • 11 Company Paid Holidays Mills Marine is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Mills Marine is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment.

Job DescriptionSalary: Depending on experience Vortex Services, LLC dba Tri-State Utilities is part of the Vortex Companies, a global leader in trenchless infrastructure solutions. Under the Tri-State Utilities brand, we specialize in field services that support the inspection, maintenance, and rehabilitation of critical water, sewer, and industrial systems. With a strong presence across North America and beyond, our team is known for safety, quality workmanship, and delivering results that stand the test of time. If youre looking to join a company thats making a lasting impact on infrastructure worldwide, wed love to hear from you. Were currently seeking an experiencedProject Manager to oversee all aspects of construction, industrial, and municipal rehabilitation projects, with a strong focus on field operations, crew management, scheduling, and project financials. Position Summary The Project Manager is responsible for overseeing field execution and managing project timelines, budgets, and resource planning. This role requires the ability to coordinate daily operations, track multiple active and upcoming projects, and serve as a key liaison between management and field teams. The ideal candidate is highly organized, safety-focused, and experienced in managing construction projects from start to finish. Duties & Responsibilities Serve as the primary point of contact between management, operations, and field crews Plan and coordinate all elements of construction project execution Develop and maintain project schedules, ensuring alignment with contractor timelines Oversee cost tracking, revenue forecasting, and overall project financial reporting Manage labor planning, resource forecasting, and equipment/material procurement Attend construction planning meetings, project site walks, and client discussions Assist with quality control and uphold safety protocols across all job sites Support field operations by providing direction and addressing on-site needs Ensure timely project completion within budget and QA/QC standards Review and approve daily reports, time logs, and all vendor/customer invoices Identify opportunities for operational improvement and efficiency Other duties as assigned Required Skills & Abilities Strong leadership and communication skills Detail-oriented with excellent organization and time management Proficient in Microsoft Office with advanced Excel capabilities Proven ability to manage field teams and support project execution Highly safety-conscious with a proactive, solutions-oriented mindset Strong understanding of project cost control, scheduling, and reporting Education & Experience Bachelors degree in construction management, engineering, or related field preferred Minimum 35 years of construction project management experience Experience in underground infrastructure, trenchless rehabilitation, or municipal/industrial projects is a plus Position Type/Expected Hours of Work: This is a full-time, exempt position. Days and hours of work are typically Monday through Friday, but some flexibility is required as job duties demand. Benefits - we offer a competitive total compensation package including health, vision, and dental insurance, 401K retirement plan, income protection insurance, off the job accident insurance, PTO and more! Vortex Companies, LLC and all subsidiaries is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, ancestry, religion, orientation, age, sex, marital status, national origin, disability, genetic information, or veteran status.

Type of Requisition: Pipeline Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: Field Service and Support Job Qualifications: Skills: Electrical Installations, Electrical Systems, Motor Repair Certifications: None Experience: 2 + years of related experience US Citizenship Required: Yes Job Description: Marine Electrician (US Navy Submarine) Onsite Locations: Portsmouth Naval Shipyard Kittery, Maine Pearl Harbor Naval Shipyard Pearl Harbor, Hawaii Kings Bay Naval Shipyard Kings Bay, Georgia Norfolk Naval Shipyard Portsmouth, Virginia Bremerton Naval Shipyard Bremerton, Washington Make meaningful contributions that fuel critical outcomes for some of the most complex government, defense, and intelligence projects. Join GDIT as a Marine Electrician (US Navy Submarine) for a career where your growth is just as important as the mission you support. The SUB AIT program supports the In-Service Attack Submarines Program Office (PMS 392) under Program Executive Office Attack Submarines (PEO SSN) to achieve optimal submarine operational readiness by providing /production support, component repairs and technical support to accomplish repair, maintenance, removal/installation, troubleshooting and associated testing for Chief of Naval Operations (CNO) submarine maintenance availabilities. The efforts associated with this program will help restore and maintain the material condition and modernization of the fast attack submarines of the United State Navy. Requirements \n • 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned.\n, • HS/GED\n, • Must be US Citizen.\n, • Must be able to obtain and maintain Secret Clearance\n\n Personnel shall have at least 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned. Personnel shall have DOD type "final" security clearance (DISCO authority with a minimum of a confidential clearance status). At a minimum, all personnel shall be United States citizens and shall possess a final favorable adjudicated tier 3 investigation. Contractor personnel must have a Department of Defense Personnel Security Clearance (PCL) at the confidential level or higher. Marine Electricians Non-Nuclear Electrical Work (TSD EW): Install, modify, repair, troubleshoot and test various electrical and electronics systems, circuits, controls, instruments and equipment. Also includes installation of wire ways and cabling. Marine Electricians Generator/Motor Repair, Electrical (TSD E4): Shop work such as disassembly, inspection, test, cleaning, varnishing, baking, and reassembly, and shipboard investigate/repair generators, motors, and transformers electrical component. Marine Electricians Topside Electrical Work (TSD TZ): Remove, Disassemble, inspect, repair, adjust, test, and install external electrical systems cabling in tanks, voids, and sails. Includes installation of hull fittings, penetrators, and tank level indicators. Marine Electrician Tasks TSD EW (Non-nuclear Electrical Work): Remove, modify, and install electrical equipment Remove, install, groom, and band wireways and cabling Pack and unpack equipment and bulkhead penetrations Repair electrical equipment and cabling Utilize electrical checks to test and troubleshoot electrical systems Disconnect, groom, and reconnect wiring TSD E4 (Generator/Motor Repair, Electrical): Disassemble and replace motor and generator components Troubleshoot, modify and adjust motors and generators Balance motor and generator components Insulate using mechanical and dip methods Stone and bevel commutator and slip rings Assemble motor and generator components TSD TZ (Topside Electrical Work): Remove, modify, and install electrical equipment Disconnect, remove, install, groom, band, and reconnect wireways and cabling Utilize electrical checks to test electrical systems Remove, install, and test hull fittings, penetrations, and tank level indicators Marine Electrician Skill Requirements TSD EW (Non-nuclear Electrical Work): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD EW. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). TSD E4 (Generator/Motor Repair, Electrical): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD E4. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). TSD TZ (Topside Electrical Work): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD TZ. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. • Growth: AI-powered career tool that identifies career steps and learning opportunities, • Support: An internal mobility team focused on helping you achieve your career goals, • Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off, • Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. #SubAIT #hireshipyardcareersgdit The likely hourly rate for this position is between $39.56 - $53.52. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 50-75% T elecommuting Options: Onsite Work Location: USA VA Portsmouth Additional Work Locations: USA GA Kings Bay, USA HI Pearl Harbor, USA ME Bath, USA WA Bremerton Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description About the Company: Founded in 1994 as a small, diversified professional services company, Delphinus employs more than 650 professional and technical personnel today to support a customer base that spans the defense and federal markets. We are headquartered in Newtown Square, PA, and have primary offices in Norfolk, VA, San Diego, CA, and Bremerton, WA. Position Location: Norfolk, VA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Apply basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions, Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), Gas Tungsten Arc (GTAW) for steel or CUNI, NICU, Inconel and various dissimilar metal combinations for pipe welding., • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed., • May position pieces be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools., • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms., • Follow Quality Assurance welding procedures., • Performs all work in accordance with established safety procedures., • Participates in special projects as required.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 5-10 years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Pneumatic and Electric Hand Tools\n\n Knowledge, Skills and Other Abilities: • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. EOE STATEMENT: We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number WEL-25-00009 This position is currently accepting applications.

Epsilon Systems is seeking a Temporary Electrician II for the Modernization and Engineering division located in Portsmouth, VA. Summary : Performs a variety of complex electrical trade functions such as the installation, maintenance, or repair of electronics and/or electrical equipment for the generation, distribution, or utilization of electric energy onboard U.S. vessels/government installations. Duties and Responsibilities: \n • Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.\n, • Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.\n, • Performs and/or verifies mechanical alignments.\n, • Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Instructions.\n, • Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).\n, • Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.\n, • Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Strictly adheres to corporate, federal, state and local safety regulations. Ensures that all Epsilon Systems Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Performs installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.\n, • Performs component and/or system troubleshooting to diagnose problems.\n, • Ensures that all requirements and detailed repair procedures and instructions are followed according to the company's work instructions, work packages, management guidance to complete the production operations.\n, • Works from blueprints, drawings, layouts, or other specifications, inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.\n, • Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments.\n, • Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.\n, • Troubleshoots motor controllers, control panels, and power distribution panels.\n, • Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.\n, • Assembles multi-pin connectors and fiber optic connections.\n, • Installs and seats brushes for AC and DC motors / generators.\n, • Completes inspection and resurfacing of commutators and slip rings.\n, • High school diploma or equivalent or vocational training.\n, • At least 5 years' experience as a marine electrician.\n, • Understands and is familiar with NAVSEA Standard items.\n, • Follows NAVSEA Standard Items.\n, • Experienced in the performance of Energized Circuit work. Basic knowledge of AC and DC electrical theory, power generation, control and distribution.\n, • Qualified in a minimum two of the following processes copper multi-pin connector assembly or repair. Fiber Optic connector assembly, repair. and testing/ troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.\n, • Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)\n, • Communicates effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n, • Ability to read, write, speak, and comprehend English.\n, • Ability to obtain access to military and government installations worldwide.\n, • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n, • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description GENERAL SUMMARY: Performs electrical work on U.S. Navy shore facilities, waterborne vessels, surface ships and/or submarines. Tasks will be related to inspections, repairs, modernization and/or alterations. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. POSITION LOCATION: Norfolk, VA DUTIES AND RESPONSIBILITIES: Other duties may be assigned. • Performs troubleshooting and/or testing of various electrical, systems, circuits, controls, instruments and equipment, onboard military shore facilities, Navy ships/vessels to include submarines and/or ship's components and documents test requirements., • Conducts voltage and other electrical safety checks., • Performs connections/hook-ups to panels, switches, and boxes., • Assists with cleaning up work area (removing debris from work area)., • Employees may be required to travel for work to other locations\n\n REQUIREMENTS: • 1-4 years of experience in shipboard electrical installations; or completion of a formal related course of study through either a community college, technical or trade school, military training, formal company training program or an apprenticeship program., • Basic experience with Voltmeters, Ammeters, Ohmmeters, Megohmmeters, (ET1 only) Light Loss meters, (ET1 only) Optical Time Delay Reflectometers (OTDRs); and general hand tools, such as screwdrivers, wire strippers, crimp tools, wrenches, knives, pliers, drills, and saws., • Able to read and interpret blueprints, sketches, wiring diagrams, written technical instructions and manuals., • Able to read and understand material safety data sheets (SDS)., • Perform basic troubleshooting and/or testing of various electrical, systems, circuits, controls, instruments and equipment., • Basic understanding of electrical theory., • Able to correctly wire simple devices, such as power/lighting panels, power/lighting distribution boxes, small terminal boxes, outlet receptacles, etc., with minimal supervision., • Graduate of a NAVSEA approved Cableway Installation and Inspection course., • (ET1 only) Full competency in Navy shipboard fiber optic methods and is currently, or has previously been, certified under NAVSEA Drawing 8477552B, which meets the requirements of NAVSEA Standard Item 009-123 and MIL-STD-1678., • Must be able to perform work autonomously, with minimal guidance, and have an expectation to assist other job requirements beyond the role of E1/ET1., • Must be prepared to perform an unassisted thorough practical demonstration of skills that may include tool and part identification, mock assembly and testing.\n EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number ELE-25-00019 This position is currently accepting applications.

1st Class Pipe Welder - 2nd shift Purpose: Colonna's Shipyard is seeking a 1st Class Pipe Welder to support 2nd shift operations in our Shipyard in Norfolk, VA. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment., • Select and execute best method to prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter and to clean, degrease, deoxidize, or desmut weld joint or work piece, using wire brush, portable grinder, or solvent clean/chemical bath, • Weld completion in flat, horizontal, vertical, or overhead positions for at least three base materials using a wide variety of processes., • Fabricate brackets, panels, complex beams and shape structures., • Plumb transverse bulkheads and panels to fabricate enclosures, complex weldments, shapes, plates, simple and complex parts from a drawing or sketch., • Operate and set up of the following equipment; hydraulic jacks and pumps, chain falls, come a longs, Steamboat Ratchets, and slings., • Expertly repair base metal products and completed welds by adding the minimum amount of weld metal or heat and the minimum amount of grinding/smoothing to meet job specification., • Also perform air-arc back gouging and oxy-acetylene torching (e.g. brazing, cutting, or pre-heating), GTAW (Gas Tungsten Arc Welding), and pipe welding, pipe flange and socket welding; as well as qualify to perform either flux cored inner shield welding, weld overlay cladding, automated back gouging, plasma back gouging or any combination thereof., • Mark or tag material with proper job number, piece marks, and other identifying marks as required and always mark completed welds with welder number., • Perform single pass 5/16-inch minimum fillet welds in all positions using FCAW on carbon steel and at least ¼-inch single-pass fillets on two other materials., • Supervise set up to perform welding in accordance with applicable WPS all welding equipment such as: wire feeders, Sub-arc tractors, Bug O's, Power sources, etc., • Clean torches and connect/lay-out cables and whips to optimize performance and perform routine maintenance on all equipment., • Recommend WPSs and WPS upgrades required for a job; when assigned, produces or supervises production, documentation, and testing of PQRs and WPQs., • Reliable, leads by example; trains less-killed welders, enforces good workmanship and safe welding practices throughout the work area; identifies gaps in weld process controls and weld process surveillance inspections and recommends corrective action., • Perform comprehensive workmanship inspection, and when directed those of others, of all welds grinding and joint preparation for NDT processes as applicable; observe QA/NDT hold points as applicable., • Complete standard dimensional computations/ Devise bracing and weld sequencing steps to maintain tolerances and minimize distortions., • Must have at least seven (7) years of Pipe Welding experience., • Must have experience working in physically demanding environments., • Prefer certifications in all positions using the SMAW and GTAW welding processes., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Job Description Company Overview: Continental Tide Defense Systems,Inc. (Continental Tide) is an industry leader, providing engineering andindustrial services to the U.S. Navy, U.S. Coast Guard, Military SealiftCommand, and other DoD organizations. At Continental Tide, we understand that agreat company culture is one where employees know their voice is heard, nomatter what their title is, and letting them grow in their role as the companydoes. We want to provide our employees with the opportunity to learn, bechallenged and be in a position where they can succeed, develop new skills, anddo things they wouldn't have the opportunity to do elsewhere. Our fast-pacedand challenging environment, employees here at Continental Tide can catapultthemselves to the top and we're looking for 'the best at what they do' to joinour team and help us grow! Job Description: Continental Tide is seeking amotivated, energetic, and experienced Engineering Technician with astrong structural background and Alteration Installation Team (AIT) leadershipexperience to support our ship modernization and sustainment projects in Norfolk,VA. This is a field-oriented leadership role ideal for a hands-on technicalprofessional experienced in the installation, modification, and repair of U.S.Navy ship structures. The successful candidate will oversee installationefforts and coordinate all aspects of structural and mechanical work duringshipboard alterations and repairs, ensuring work is performed safely,efficiently, and in compliance with Navy and contract standards. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Essential duties & responsibilities include, butare not limited to the following: \n • Serveas the structural SME and project lead for hull, mechanical and structuralrepairs projects, managing day-to-day operations onboard ships and in shipyardenvironments.\n, • Leadstructural teams in the layout, cutting, fitting, installation, and alignmentof structural components including bulkheads, deck inserts, framing, andfoundations.\n, • InterpretNAVSEA drawings, blueprints, and technical specifications to plan and executestructural work packages in compliance with 9090-310 REV H or latest version.\n, • Superviseand mentor shipfitters, mechanics, welders, and helpers to ensure qualitycraftsmanship and safe work practices.\n, • Collaboratewith Project Leads, Program Managers, Engineers, QA &QC, and customerrepresentatives to resolve issues and align project goals.\n, • Assistin tracking and report daily progress, labor hours, and material usage; assistin scheduling and forecasting work.\n, • Ensureall structural work adheres to NAVSEA Standard Items, ABS requirements, OSHAregulations, and company policies.\n, • Adhereto, maintain, and update all QA documentation OQE to include but not limited toweld maps, inspections, and post-repair testing.\n, • Identifyand mitigate project risks, support change orders, and contribute toafter-action reporting.\n, • Asrequired perform duties and responsibilities as Site Foremen as a project lead foroverall task assignment.\n, • SubmitDaily Status Reports (DSR), develop Condition Found Reports, and updateprogress utilizing Microsoft Project in POA&M (plans of action &milestone) format.\n\n Experience and Skills \n • Targetexperience of ten (10) years of experience in shipfitting or structural shiprepair, with at least three (3) years in a supervisory or lead role.\n, • Technicalexpert in shipboard structural repairs including insert installation, hullcuts, and steel fabrication.\n, • Strongunderstanding of QAWBs, OQE documentation, and structural inspection processes.\n, • Provenleadership skills in a shipboard or industrial repair environment. \n, • Eligibleto obtain a DoD Secret Security Clearance.\n, • Mustbe able to work in confined spaces, at heights, and aboard vessels. \n, • Proficientin reading and interpreting NAVSEA drawings, welding symbols, and installationspecifications.\n, • Experiencewith maintaining budgets and material.\n, • FormerU.S. Navy Hull Technician (HT) or shipyard trade certification in structuralfabrication or welding.\n, • Weldingcertifications (FCAW, SMAW, GMAW) are a plus.\n, • Experiencewith HPUs, Valves, Pumps/Motors, Hydraulic systems is a plus.\n, • Experiencesupporting NAVSEA modernization programs.\n, • Experience communicating directly with management,subcontractors, and customers regarding project cost, staffing, and scheduling.\n, • Background in preparing status reports and ensuring plansadhere to contract specifications.\n, • OSHA10 or 30 Maritime Certification.\n, • Exposureto open-air environments.\n, • Requiredto visit project sites aboard ships and rigs, both onshore and offshore.\n, • Wearvarious types of personal protective equipment (PPE), (i.e. ear plugs, safetyglasses, hard-hat, steel-toed boots, gloves) as required.\n, • Sitevisits may involve standing on a variety of surfaces and angles, bending,crouching, and climbing over obstructions such as scaffolding, ladders, andinternal barge or boat structural components.\n, • Exposureto sound levels exceeding 100 decibels.\n, • Mustpossess sufficient visual acuity, peripheral vision, depth perception, andnight vision to inspect marine components and systems, identify defects orirregularities, and safely operate tools and equipment.\n, • Maywork in confined spaces with limited ventilation.\n, • Requireprolonged periods of sedentary work, including sitting and/or standing.\n, • Maybe required to operate machinery, power tools, and/or heavy equipment.\n, • Mustbe able to communicate effectively to exchange and comprehend information.\n, • Frequentexposure to extreme weather conditions, including high heat and extreme cold.\n To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Job Benefits Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Why Join Us? At Continental Tide, we foster a culture of collaboration, innovation, and professional growth. By joining our team, you'll work on impactful projects supporting our nation's fleet, with opportunities to advance your career in a fast-paced and rewarding environment. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description GENERAL SUMMARY: Performs electrical work on U.S. Navy shore facilities, waterborne vessels, surface ships and/or submarines. Tasks will be related to inspections, repairs, modernization and/or alterations. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. POSITION LOCATION: Norfolk, VA DUTIES AND RESPONSIBILITIES: Other duties may be assigned. • Performs troubleshooting and/or testing of various electrical, systems, circuits, controls, instruments and equipment, onboard military shore facilities, Navy ships/vessels to include submarines and/or ship's components and documents test requirements., • Conducts voltage and other electrical safety checks., • Performs connections/hook-ups to panels, switches, and boxes., • Assists with cleaning up work area (removing debris from work area)., • Employees may be required to travel for work to other locations\n\n REQUIREMENTS: • 1-4 years of experience in shipboard electrical installations; or completion of a formal related course of study through either a community college, technical or trade school, military training, formal company training program or an apprenticeship program., • Basic experience with Voltmeters, Ammeters, Ohmmeters, Megohmmeters, (ET1 only) Light Loss meters, (ET1 only) Optical Time Delay Reflectometers (OTDRs); and general hand tools, such as screwdrivers, wire strippers, crimp tools, wrenches, knives, pliers, drills, and saws., • Able to read and interpret blueprints, sketches, wiring diagrams, written technical instructions and manuals., • Able to read and understand material safety data sheets (SDS)., • Perform basic troubleshooting and/or testing of various electrical, systems, circuits, controls, instruments and equipment., • Basic understanding of electrical theory., • Able to correctly wire simple devices, such as power/lighting panels, power/lighting distribution boxes, small terminal boxes, outlet receptacles, etc., with minimal supervision., • Graduate of a NAVSEA approved Cableway Installation and Inspection course., • (ET1 only) Full competency in Navy shipboard fiber optic methods and is currently, or has previously been, certified under NAVSEA Drawing 8477552B, which meets the requirements of NAVSEA Standard Item 009-123 and MIL-STD-1678., • Must be able to perform work autonomously, with minimal guidance, and have an expectation to assist other job requirements beyond the role of E1/ET1., • Must be prepared to perform an unassisted thorough practical demonstration of skills that may include tool and part identification, mock assembly and testing.\n EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number ELE-25-00019 This position is currently accepting applications.

Epsilon Systems Solutions, Inc. has an opportunity for a full-time Quality Assurance and Non-Destructive Test Specialist in Virginia Beach, VA. Summary: The Quality Assurance and Non-Destructive Test Specialist will provide Quality Assurance (QA) and Non-Destructive Testing (NDT) to command forces for testing, inspection and certification of minor and major structural repairs. Roles and Responsibilities: \n • Conduct visual, liquid penetrate and magnetic particle inspection methods to assess weld repairs completed on heavy equipment\n, • Review work packages prior to start-work for completeness, accuracy and compliance with technical specifications and customer requirements.\n, • Follow basic Test and Inspection Plans for projects.\n, • Perform in-process work surveillances and weld surveillances and assist production management with final work-package review after work-completion.\n, • Help prepare Corrective Action Requests, and Preventative Action requests as related to repair work to ensure compliance with established policies, procedures and work instructions.\n, • Ensure compliance with NAVSEA Standard Item and other customer-related requirements to ensure work is conducted accurately and safely.\n, • Follows test standards and specifies test equipment associated with requirements established in test and inspection plans.\n, • Bachelor's Degree or equivalent of 6 years general quality management systems experience and a minimum of recent (within 15 years):\n, • Five (5) consecutive years in Quality Assurance and Non-Destructive Testing;\n, • Five (5) consecutive years' experience in shipbuilding environment with general knowledge and understanding of metallic fabrication machinery, precision welding, brazing, tube bending, and shipboard safety;\n, • Five consecutive (5) years' experience and certification to Level II NAVSEA TECH PUB 271 or ASNT TC-1A for Non-Destructive Testing to include; Visual, Liquid Penetrate, and Magnetic Particle Inspection Methods.\n, • Knowledge of proper use of diagnostic equipment\n, • Possess basic computer skills with working knowledge of Microsoft Outlook, Word and Excel.\n, • Possess organizational skills.\n, • Possess effective oral and written communication skills.\n, • Ability to work in a team environment and be flexible.\n, • Ability to travel overseas when required.\n, • Possess or ability to obtain and maintain a secret clearance.\n, • Prior military expeditionary equipment maintenance experience.\n, • Must be able to lift, carry and transport heavy equipment and boxes up to 50 lbs.\n, • Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc).\n, • Ability to be able to work in maintenance shop environment\n, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.\n, • Travel may be required within and outside of the continental United States.\n, • Travel requirement less than 25%\n, • Job may require bending, stooping, lifting, and will be in an environment of low and high temperatures.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Job Details Job Location Norfolk, VA, USA - Norfolk, VA Position Type Full Time Salary Range $28.00 - $35.00 Hourly Travel Percentage Negligible Job Shift Day Job Category Ship Repair Description \n • Inspect, diagnose, and repair centrifugal, positive displacement, submersible, vacuum, gear, and diaphragm pumps.\n, • Perform disassembly, cleaning, overhaul, reassembly, alignment, and testing of various pump systems to ensure proper function.\n, • Conduct preventative and predictive maintenance according to established schedules and industry best practices.\n, • Troubleshoot pump-related issues involving seals, bearings, impellers, motors, and couplings.\n, • Maintain accurate maintenance logs, parts usage records, and repair reports.\n, • Support planning and execution of overhauls or rebuilds.\n, • Assist with root cause analysis of recurring failures and recommend corrective actions.\n, • Prepare inspection reports to include conditions found and recommended repairs IAW. specifications\n, • Research parts and materials for pump repairs using OEM technical specifications and other various vendors to ensure repairs are completed IAW. specifications\n, • Ensure compliance with safety procedures, lockout/tagout policies, and environmental regulations.\n, • Train and mentor junior mechanics and maintenance staff as needed.\n, • Perform other mechanical work as required to support maintenance and operations.\n\n Reasonable Accommodations Statement Auxiliary Systems, Inc. is committed to the full inclusion of all qualified individuals. As part of this commitment, Auxiliary Systems, Inc. will ensure that persons with disabilities are provided reasonable accommodations. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact [email protected]. Qualifications \n • Must be able to read, write and comprehend instructions in written or spoken in English.\n, • Must be able to calculate and understand units of measure.\n, • Must be reliable with a strong work ethic.\n, • Must be able to use and interpret various measurement tools to include Calipers and Micrometers\n, • Must have basic hand tools applicable to your trade with bag or tote.\n, • Must be able to read and interpret blueprints, schematics, tech manuals and work specifications for various types of machinery and/or piping systems.\n, • Must be able to wear applicable PPE (Hard hat, safety goggles, gloves, steel toes shoes, ear protection)\n\n This job description does not include all activities, duties or responsibilities required for this position. The key duties, responsibilities and requirements identified in this description are subject to modification by the Company at any time. Desired Education and Experience: \n • Education Minimum: High School Diploma/GED\n, • Preferred Minimum: Trade School, Apprenticeship, or Higher Education\n, • Basic computer skills preferred\n\n Other Requirements: \n • Must have reliable transportation\n, • Must be eligible to obtain DBIDs\n, • Must be able to pass a drug screening\n\n Trade Class Designation: Helper Performs a variety of duties with a basic knowledge and understanding of their respective trade. The position generally requires daily supervision and typically requires at least 1-3 years of relevant experience. Junior Tradesperson Performs a wide variety of duties with an advanced knowledge and understanding of their respective trade. The position generally requires moderate supervision and typically requires at least 4-7 years of relevant experience. Senior Tradesperson Performs a wide variety of duties at an advanced or expert level. A senior tradesperson understands theory, operation, and advanced concepts within their respective trade. The position generally requires little or no supervision and typically requires at least 7-10 years of relevant experience. Physical Demands Must be able to work in, on, around, over and under fixed equipment and machinery; to work from lifts, ladders, and scaffolding; to manipulate heavy equipment, tools and supplies and/or exert 50 lbs.; to concurrently manipulate multiple controls and machinery; to work in hazardous or irritating environments, confined spaces, and adverse weather or temperature conditions, to wear and work in personnel protective equipment. EEO Statement Auxiliary Systems, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Auxiliary Systems, Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Applied Technical Services, LLC ("ATS" or the "Company") is a leading provider of critical testing, inspection, certification, and compliance services. The Company serves clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense. ATS was founded in 1967 and is headquartered in Marietta, GA. Today the Company employs nearly 2,100 team members in over 95 locations across the United States. Our purpose is to create a safe and reliable world and our mission is to deliver assurance through precise technical and professional services. Summary: ATS is seeking NDT Level II Techs & NDT Assistants/Trainees to support our Chesapeake, VA office. Responsibilities/Duties: NDT Assistants/Trainees • Perform tasks as directed in order to prepare components or equipment for inspections., • Work alongside certified technicians to help complete projects and learn activities., • Interface with personnel to determine scope of work and work priorities in order to meet customer expectations., • Interface with personnel to determine scope of work and work priorities in order to meet customer expectations., • Help clean and organize equipment before, during, and at the completion of projects., • Document on job training experience as assigned by management., • Perform other job related tasks as assigned by supervisors. Responsibilities/Duties: NDT Level II Technicians • Perform examinations of materials in accordance with procedures, codes, standards, and specifications., • Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for OJT and guidance of trainees, • Interface with department managers and clients to determine scope of work and work priorities in order to meet customer expectations., • Be able to prepare written instructions and to organize and report the results of examinations., • Work independently and support team members Perform other job related tasks as needed and assigned by supervisors. Qualifications Minimum: Requirements/Qualifications: • NDT Assistants/Trainees High School Diploma, GED, or equivalent; math and print reading skills; ability to used computers for data entry and report writing; Applicants with documented prior NDT classroom training or OJT preferred., • NDT Level II Technicians Meet the minimum requirements of an NDT Assistant/Trainee; provide documentation of education, training, and experience in the applicable NDT method(s); have a working knowledge of industrial environments and general manufacturing processes; ability to effectively communicate with other departments, and customers to report issues and solve problems. All applicants require the following: • Ability to learn and comply with all company policies and procedures., • Excellent communication skills written and verbal., • Applicants must pass a drug screen and have a valid drivers license with a clean driving record., • U.S. Persons Only: A requirement of this position is access to information that is subject to U.S. export controls under the U.S. International Traffic in Arms Regulations (ITAR). Accordingly, the company will consider only U.S. Persons for this position. A U.S. Person includes (a) U.S. citizens or nationals; (b) U.S. lawful permanent residents (i.e., green card holders); (c) persons granted refugee status; or (d) persons granted asylum in the United States. This information is collected solely for purposes of complying with U.S. export control requirements and will not be used to unlawfully discriminate in the hiring process. Work Conditions: • Must be able to wear safety equipment as required by the safety department for personal protection., • Work from heights on scaffolding, ladders, elevated platforms, man-baskets, etc., • Work in confined spaces which will require crawling, stooping, climbing, etc., • Work in around operating equipment and industrial environments., • Work with radiation and hazardous materials such as cleaners, penetrants, film developing chemicals, etc., • Work shifts up to 12 hours/day and 7 days/week and travel for extended periods of time, • Ability to lift and carry 100 pounds. Benefits: ATS offers excellent wages and advancement opportunities. ATS full-time employee benefits include: medical, dental, vision, 401k, vacation, personal time, and bonuses. EOE/AA/M/F/Vet/Disabled ATS is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description About the Company: Founded in 1994 as a small, diversified professional services company, Delphinus employs more than 650 professional and technical personnel today to support a customer base that spans the defense and federal markets. We are headquartered in Newtown Square, PA, and have primary offices in Norfolk, VA, San Diego, CA, and Bremerton, WA. Position Location: Norfolk, VA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Apply basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions, Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), Gas Tungsten Arc (GTAW) for steel or CUNI, NICU, Inconel and various dissimilar metal combinations for pipe welding., • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed., • May position pieces be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools., • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms., • Follow Quality Assurance welding procedures., • Performs all work in accordance with established safety procedures., • Participates in special projects as required.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 5-10 years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Pneumatic and Electric Hand Tools\n\n Knowledge, Skills and Other Abilities: • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. EOE STATEMENT: We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number WEL-25-00009 This position is currently accepting applications.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Norfolk, VA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Apply basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions, Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), Gas Tungsten Arc (GTAW) for steel or CUNI, NICU, Inconel and various dissimilar metal combinations for pipe welding., • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed., • May position pieces be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools., • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms., • Follow Quality Assurance welding procedures., • Performs all work in accordance with established safety procedures., • Participates in special projects as required.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 10+ years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds., • Read and understand blueprints and specifications.\n\n Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. EOE STATEMENT: We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number WEL-25-00013 This position is currently accepting applications.

QA-NDT Inspector Purpose: Colonna's Shipyard is seeking a QA-NDT Inspector to oversee shipyard operations in Norfolk, VA. The QA-NDT Inspector is responsible for conducting, documenting, and maintaining records associated with inspection per customer and contractual requirements. The Inspector will also perform Non-Destructive Testing in the NDT disciplines they are certified to and document those activities in reports and required forms. Job Description: • Oversee / monitors inspections then documents inspection results on required forms., • Perform VT, MT, PT and UT inspections as required., • Analyzes documents, drawing, customer requirements and quality procedures to ensure the Company meets the requirements and standards of the customer., • Generate, review and / or submit condition found reports, test and inspection plans, process control procedures, test documents and / or corrective action reports (CAR) as required to document customer requirements or non-conformances., • Inventories and maintains test equipment and gauges., • May be tasked to prepare presentation materials, teaching aids, handouts, etc. and conduct training when requested., • Perform audits and / or surveillance as needed or assigned., • Work independently to complete responsibilities., • Travel to work locations when required, both CONUS and OCONUS., • Must have at least three (3) years' experience in NDT and Quality Control / Assurance., • Must have a combination of any of the following NDT Certifications; VT, MT, PT and/or UT., • Must have excellent interpersonal, negotiation, communication and writing skills., • Must have strong organizational skills., • Must be able to get access to Government Facilities, • Must understand NAVSEA Standard Items and other Government Specifications., • Prefer related Department of Defense experience including direct experience with government customer relations., • Occasional Travel; 25% or less. \n\n Security Requirements: • Must be able to access Government facilities and be DBIDS eligible., • Position requires US Citizenship.\n\n Physical Requirements: • Sit, Stand, Walk, Bend, Squat, Climb, Reach, Push and Pull, Stoop, Crawl, Kneel, Balance, Lift and Carry various objects and equipment., • General shipyard/industrial environment. this type of work has physical demands that require frequent movement up to 65% of the time., • Lighting and temperature are adequate, and there is minimal exposure to hazardous or unpleasant conditions caused by noise, dust, etc. Hear, talk, and smell., • Specific vision abilities required by this job include close vision, peripheral vision, and the ability to adjust focus., • Work is generally performed within an office environment, with standard office equipment available, but also requires safe navigation and regular partnership with operations teams within shipyard/industrial environments., • A considerable amount of time is spent operating a personal computer., • Must be able to climb up and down stairs and spend time moving throughout the facility and onboard marine vessels.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

REGIONAL CDL A TRUCK DRIVERS! $1500 - $1800 WKLY AVG! 100% NO TOUCH! Service Transportation, Inc., is a family-owned and operated business that means we put people first. We are proud of all of our employees and their efforts and the support of their families in all that we do. We are a team and a family. People make this business happen every day. We believe in a Truth in Trucking mentality. Meaning that we will tell the truth even when it's not always welcome. Call us at 843-305-6577 POSITION DETAILS • 55 CPM TO START PLUS PAID LOAD PERCENTAGE- INCREASES AT 90 DAYS, • $1,500 - $1,800 Weekly Average, • ANNUAL BONUS FOR ALL MILES DRIVEN IN PREVIOUS YEAR, • Pay raise after 90 days- INCLUDING INCREASE IN LOAD PERCENTAGE PAY AS WELL, • 10 - 14 Days Out, • Quarterly Bonus - 3 CPM/ 4 CPM- STARTS DAY 1- ON ALL MILES, • $5000 Referral Bonus on EVERY referral you send - even before you start!, • Additional Pay/Bonuses - Breakdown, Detention, DOT Inspection, • No Touch Freight Assigned Trucks, • Weekly Direct Deposit Pay, • Per Diem, • Benefits include: Medical, Dental, and Vision and AFLAC!, • 401k with Company Match, • Paid Vacation, • Rider Policy, • Orientation Completed in One Day! General Description of Benefits: Medical, Dental, and Vision and AFLAC! 401k with Company Match HIRING CRITERIA • CLASS A CDL, • 8 Months Verifiable Experience Required, • 22 years or older, • NON HAZMAT

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Norfolk, VA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed;, • May position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools;, • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms, • Follow Quality Assurance welding procedures, • Performs all work in accordance with established safety procedures., • Participates in special projects as required.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 1-5 years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Pneumatic and Electric Hand Tools, • Knowledge, Skills and Other Abilities:, • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number WEL-25-00011 This position is currently accepting applications.

1st Class Pipe Welder Purpose: Colonna's Shipyard is seeking a 1st Class Pipe Welder to support day shift operations in our Shipyard in Norfolk, VA. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment., • Select and execute best method to prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter and to clean, degrease, deoxidize, or desmut weld joint or work piece, using wire brush, portable grinder, or solvent clean/chemical bath, • Weld completion in flat, horizontal, vertical, or overhead positions for at least three base materials using a wide variety of processes., • Fabricate brackets, panels, complex beams and shape structures., • Plumb transverse bulkheads and panels to fabricate enclosures, complex weldments, shapes, plates, simple and complex parts from a drawing or sketch., • Operate and set up of the following equipment; hydraulic jacks and pumps, chain falls, come a longs, Steamboat Ratchets, and slings., • Expertly repair base metal products and completed welds by adding the minimum amount of weld metal or heat and the minimum amount of grinding/smoothing to meet job specification., • Also perform air-arc back gouging and oxy-acetylene torching (e.g. brazing, cutting, or pre-heating), GTAW (Gas Tungsten Arc Welding), and pipe welding, pipe flange and socket welding; as well as qualify to perform either flux cored inner shield welding, weld overlay cladding, automated back gouging, plasma back gouging or any combination thereof., • Mark or tag material with proper job number, piece marks, and other identifying marks as required and always mark completed welds with welder number., • Perform single pass 5/16-inch minimum fillet welds in all positions using FCAW on carbon steel and at least ¼-inch single-pass fillets on two other materials., • Supervise set up to perform welding in accordance with applicable WPS all welding equipment such as: wire feeders, Sub-arc tractors, Bug O's, Power sources, etc., • Clean torches and connect/lay-out cables and whips to optimize performance and perform routine maintenance on all equipment., • Recommend WPSs and WPS upgrades required for a job; when assigned, produces or supervises production, documentation, and testing of PQRs and WPQs., • Reliable, leads by example; trains less-killed welders, enforces good workmanship and safe welding practices throughout the work area; identifies gaps in weld process controls and weld process surveillance inspections and recommends corrective action., • Perform comprehensive workmanship inspection, and when directed those of others, of all welds grinding and joint preparation for NDT processes as applicable; observe QA/NDT hold points as applicable., • Complete standard dimensional computations/ Devise bracing and weld sequencing steps to maintain tolerances and minimize distortions., • Must have at least seven (7) years of Pipe Welding experience., • Must have experience working in physically demanding environments., • Prefer certifications in all positions using the SMAW and GTAW welding processes., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).