Trabajos machine learning en Fort Worth, TexasCrear alertas

Job Description All Points North (APN) is seeking a Nurse to join our PRN Pool at our DFW facility. This position focuses on providing compassionate, high-quality care in a behavioral health and wellness setting. Shift availability will vary and may include both weekdays and weekends. A minimum of 24 to 36 worked hours per month is required. Broad Statement of Responsibilities: A registered nurse (RN) is a vital member of the healthcare team responsible for providing direct patient care, promoting health, preventing illness, and assisting patients in managing their health conditions. The job description of a registered nurse typically includes the following responsibilities: Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education: This position requires a bachelor’s degree or associate degree in nursing. Must also possess a nursing license in the state of Texas. CARN certification preferred but not required. Experience: A minimum of 2 years nursing experience preferred but not required. Preferred experience in behavioral health. Special Skills & Knowledge: Candidates should have the following skills and attributes: must be able to work and communicate well with people; be adaptable, and accept changes quickly and easily; be willing to address conflict appropriately. Basic computer skills are required with Microsoft Office Suite and web-based products knowledge a bonus. Physical Requirements: The physical requirements described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Routine mobility includes standing, stooping, bending, lifting, walking and running., • Regularly required to sit and work at a phone/computer work station, • Ability to lift up to 30 lbs. Materials & Equipment: Copy machine, Multi-line telephone, personal computer, and fax machine Essential Requirements: • High moral and ethical values, • Willingness to be open to learning and growing, • Articulate, with interpersonal skills to work as an integral part of a team., • Must possess a valid driver’s license, appropriate references, and transcript from an accredited university., • Appropriate interpersonal/personal boundaries, • Maturity of judgment and behavior., • Ability to remain flexible to accommodate changes in work schedule., • Adapts effectively to new situations Position Duties and Responsibilities- Include but not limited to: Patient Assessment: Conduct comprehensive assessments of patients' health status, including physical, emotional, and psychological factors. • Care Planning: Develop individualized care plans based on the assessment findings, incorporating patient preferences, medical history, and healthcare goals., • Medication Administration: Administer medications and treatments as prescribed by physicians, ensuring accurate dosage, proper administration techniques, and monitoring for adverse reactions., • Patient Education: Educate patients and their families about their medical conditions, treatment plans, medications, and self-care techniques to promote optimal health outcomes and prevent complications., • Monitoring Vital Signs: Monitor patients' vital signs, including blood pressure, heart rate, temperature, and oxygen saturation, to assess their physiological status and detect any abnormalities., • Clinical Procedures: Perform various clinical procedures, such as wound care IV therapy, and specimen collection, following established protocols and ensuring patient safety and comfort., • Collaborative Care: Collaborate with other healthcare professionals, including physicians, therapists, social workers, and pharmacists, to coordinate patient care and facilitate interdisciplinary communication., • Documentation: Maintain accurate and thorough documentation of patient assessments, interventions, and outcomes in electronic health records (EHRs) or other medical record systems, adhering to legal and regulatory requirements., • Advocacy: Advocate for patients' rights, preferences, and needs within the healthcare system, ensuring they receive high-quality, compassionate care that respects their dignity and autonomy., • Crisis Intervention: Respond to emergencies and crises promptly, implementing appropriate interventions to stabilize patients' conditions and ensure their safety., • Quality Improvement: Participate in quality improvement initiatives aimed at enhancing patient care processes, outcomes, and safety within the healthcare facility., • Professional Development: Pursue ongoing professional development opportunities to stay abreast of advances in nursing practice, evidence-based guidelines, and regulatory changes.

Job Description * Location: UT Arlington • We are hiring immediately for full time DISHWASHER positions., • Address: 300 W Mitchell Street, Arlington, TX 76019 Note: online applications accepted only., • Schedule: Full time; weekends required, AM & PM shifts available. More details upon interview., • Requirement: Prior food service experience is preferred, but not required., • Fixed Pay Rate: $12.00 per hour . We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1467237. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Join our campus team where you are valued and empowered to make a difference. Enjoy competitive wages, benefits, and perks like Instapay through the One @Work app. Our careers are filled with purpose and encourage learning, growth, and meaningful impact. Apply today! Job Summary Summary: Maintains dishes, pots, pans, trays, kitchen, work areas, equipment and utensils in orderly and sanitary condition. Essential Duties and Responsibilities: • Scrapes and rinses food from dirty dishes and washes them by hand or places them in racks or on conveyor to dishwashing machine depending on assigned equipment. Ensures complete cleanliness and sanitation., • Washes pots, pans and trays based on assigned procedures. Ensure complete cleanliness and sanitation., • Polishes silver using burnishing machine tumbler, chemical dip, buffing wheel and hand cloth depending on assigned equipment and procedures. Ensures complete cleanliness and sanitation., • Ensures compliance with outlined safety procedures., • Maintains temperatures and chemical levels as outlined by provided standards., • Keeps dish area orderly and in compliance with safety standards., • Sweeps and mops kitchen floors to ensure compliance with safety and sanitation standards., • Washes worktables, walls, refrigerators, meat blocks and other food prep surfaces., • Removes trash and places it in designated containers. Steam cleans or hoses out garbage cans., • Transfers supplies and equipment between storage and work areas., • Helps load and unload supplies and product. We are always looking for ways to invest in our people both inside and outside of work to help them achieve their full potential. Both full-time and part-time associates are eligible for the following benefits: • Opportunities for Training and Development, • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program In addition, full-time positions also offer the following benefits to associates: • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program Because this position requires you to perform services in an educational facility, there may be periods when the Company does not require you to perform work (such as winter and summer breaks when food service needs decline or cease). Any such periods during which you do not perform work on the Company’s behalf may be unpaid and deemed a temporary layoff. However, depending on business needs, you may be required to work year-round, potentially at a different location during break periods. Business needs may vary from year to year. Our Commitment to Diversity and Inclusion Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Chartwells Higher Ed maintains a drug-free workplace.

Job Description & (Onsite – No Remote) Interview: In-person interview required Work Authorization: No H1B | Local candidates only Role Overview We are seeking a Cybersecurity Metrics Developer to design and deliver data-driven solutions that strengthen our cybersecurity metrics and reporting framework. This role combines technical expertise with strategic insight, requiring strong proficiency in data modeling, business intelligence (BI) tools, and analytics. The ideal candidate will collaborate with cybersecurity product teams, metric owners, and executive stakeholders to translate requirements into scalable dashboards, reports, and automated alerts that drive visibility into cybersecurity performance. They will also play a key role in evolving the metrics framework to ensure accuracy, reliability, and alignment with organizational risk objectives. Key Responsibilities * Lead the full lifecycle delivery of BI reporting and dashboards. * Translate business needs into actionable and visually impactful dashboard/report designs. * Prepare and transform data: source, clean, integrate, and mine relevant data sources. * Propose innovative approaches to complex BI and advanced data visualization challenges. * Build and maintain consultative relationships with stakeholders to proactively identify needs and address compliance/regulatory requirements. Minimum Qualifications * Bachelor’s degree in Engineering, Data Science, Computer Science, Mathematics, Operations Research, or related field (or equivalent experience/training). * 3+ years of experience designing, developing, and maintaining BI and data visualization programs at scale. * 2+ years of experience with Power Apps and Power Automate. * Strong expertise in Power BI development. * Solid SQL skills for database development and querying. * Proficiency with BI tools and ability to implement creative, data-driven solutions. * Excellent analytical, communication, and problem-solving skills. Preferred Qualifications * Master’s degree (MS) in Engineering, Data Science, Computer Science, or related field. * 2+ years of experience in a technical professional environment. * Industry exposure to airline/travel, finance, healthcare, or government. * Experience with: * Python or R for programming and analytics. * Data mining, Big Data concepts, statistical machine learning algorithms. * Text mining, recommender systems, predictive/prescriptive analytics. * ETL processes using Alteryx (preferred) or similar tools. * Advanced data wrangling from multiple disparate sources. * Visualization tools such as Tableau in addition to Power BI. * Strong ability to work in an agile, operationally driven environment. * Proven ability to interact effectively with senior leadership and cross-functional teams.

Job DescriptionJob Summary: We are seeking a highly skilled and motivated Manufacturing Software Engineer to design, develop, and integrate software solutions that support manufacturing operations and enterprise systems. The ideal candidate will bring full-stack development expertise, strong database and integration knowledge, and a passion for automating and optimizing industrial processes in a smart factory environment. Key Responsibilities:1. Software Development & Integration * Design, develop, and maintain full-stack custom applications (web and desktop) using .NET, Python, JavaScript, Java, or C#. * Integrate enterprise applications with manufacturing systems such as MES, ERP (SAP/Oracle), SCADA, PLCs, and industrial IoT platforms. * Develop and implement REST APIs and industrial communication protocols (OPC UA, MQTT) for seamless system interoperability. * Ensure applications meet performance, security, and scalability requirements in production environments. 2. Database Management & Data Engineering * Design and manage SQL-based and NoSQL databases for storing and analyzing operational and business data. * Build ETL pipelines and data workflows to automate data collection and processing across systems. * Maintain data integrity, security, and compliance in line with organizational policies. * Leverage cloud platforms (AWS, Azure, GCP) for data storage, application deployment, and computation. 3. UI/UX Development & User Support * Develop modern, intuitive user interfaces and dashboards using frameworks such as React, Angular, or Vue.js. * Create real-time visualization tools to monitor production metrics and KPIs. * Provide training and technical support to internal stakeholders on developed solutions. * Document architecture, workflows, and user guides for long-term maintainability and scalability. 4. Process Automation & Continuous Improvement * Create automated scripts, bots, or machine learning models to optimize manufacturing workflows. * Collaborate with cross-functional teams (MES, IT, automation) to implement Industry 4.0 and smart factory solutions. * Support CI/CD pipelines to facilitate agile and iterative development cycles. * Analyze logs and system data to troubleshoot issues and enhance performance. Qualifications:Education & Experience * Bachelor’s or Master’s degree in Computer Science, Software Engineering, or a related field. * Minimum 2 years of experience in software development, system integration, or industrial IT solutions. Technical Skills * Proficiency in Python, C#, .NET, Java, JavaScript, and SQL. * Experience with modern web frameworks (React, Angular, Vue.js) and backend frameworks (Flask, Django). * Expertise in relational (MSSQL, PostgreSQL, MySQL) and NoSQL databases. * Strong understanding of APIs, WebSockets, GraphQL, and industrial protocols (OPC UA, MQTT). * Familiarity with cloud services (AWS, Azure, GCP) and DevOps tools (Docker, Kubernetes, Git, CI/CD). * Working knowledge of MES, ERP, SCADA, and IoT platforms in industrial settings. Soft Skills * Excellent problem-solving and analytical skills. * Strong communication abilities for collaborating with both technical and non-technical stakeholders. * Self-motivated with the ability to manage multiple priorities in a fast-paced manufacturing environment. Work Environment: * Primarily office or hybrid, with periodic time on the manufacturing floor. * Interaction with cross-disciplinary teams in engineering, IT, and operations. * May require occasional on-call support during production-critical events.

Job Description Compensation: Starting base pay - $85,000 plus Monthly Case Bonus Incentive Position Summary: The Lithotripsy Technician functions at the advanced level, assisting with all areas of planning, development, training and support. The Lithotripsy Technician at this level works independently performing highly specialized Urological, Interventional and Lithotripsy procedures. Exposure to blood, body and air borne pathogens is part of the daily work environment. The Lithotripsy Technician participates in the coordination of the daily schedule and quality assurance activities. The incumbent is responsible for maintaining the Lithotripsy database and coordinating activities that are consistent with the guidelines and regulatory requirements of accrediting bodies. Job duties include monitoring patients, preparing rooms and trays for procedures, supply and inventory management, scheduling patients and monitoring and operating a variety of imaging equipment. Additional activities related to the Lithotripsy program include: development of policies and procedures, revenue capture, quarterly reports, cost monitoring, patient scheduling, patient safety and satisfaction, patient flow, and operational monitoring. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 1. Prepares for procedures • Accepts requests from physicians and inpatient nursing units for procedures., • Obtains sufficient information to determine whether procedure should be scheduled immediately or on the following day., • Schedules and performs procedures if immediate service is indicated., • Prepares written notification, which contains complete information to be used by day appointment clerk to complete scheduling of the patient., • Assists the nursing staff to educate patients about procedures., • Reviews the patient chart. Ensures that the pre and post procedure forms are complete and the appropriate pre procedure lab values are available., • Sets up room for procedures., • Does initial warm-up testing to ensure that the machine is functioning appropriately prior to placing the patient on the table., • Supplies appropriate information to the clinic receptionist to ensure that stent removals and add-on procedures are entered into the computer, counted in the daily census, and billed. Supplies information on stent placements or removals to the physician secretary for appropriate tracking and to ensure that stents are removed or changed in a timely fashion. 2. Performs Advanced Urological Procedures · Checks the requisition for complete information on the procedure to be performed. Refers any questions to treatment physician before proceeding with the examination. Checks the current lab values and medical history to ensure patients safety and well-being. · Positions the patient for proper radiographic projections, ensuring patient comfort, modesty and safety. Employs advanced technical skills to perform difficult examinations due to patient condition, status of disease, or ability of the patient to understand and cooperate. · Puts patient at ease by explaining procedure as examination proceeds. · Notifies the physician after the anesthesiologist has sedated the patient. · Selects proper radiographic exposure settings or computer setting to obtain optimal images. · Targets the stone (Lithotripsies) and determines the number of shocks to be delivered with input from the Urology Physician. · Operates the Lithotripter and complex imaging equipment according to established policies and procedures. · Assists the physician or anesthesiologist if the patient’s condition changes. Knows location of airway boxes, oxygen and related supplies. · Utilizes vast knowledge of numerous inventory items to determine which product will work best for the attending physician. · Performs pre-procedure room and equipment setup and post-procedure clean up to ensure a clean, safe and pleasant environment for patients. Prepares the sterile tray for each procedure and preps the patient for the examination using aseptic technique. Assists the physician. · Alerts the recovery room staff when the procedure is completed and informs them of the approximate time of arrival in their area. Gives brief report on the patient. · Consults with radiologist or urologist on special needs and requirements to perform acceptable examinations in unusual circumstances. 3. Processing Images and Instructing Students · Checks the status of the Computed Radiography (CR) plate reader to ensure device is in proper operating condition. Makes necessary adjustments as indicated according to level of training and authorization. Reports problems as necessary to appropriate individual. · Processes images using the CR system. · Reviews finished images to ensure adequate image quality. Marks images appropriate for position, date and amount of contrast. · Explains and demonstrate methodology of various diagnostic radiographic procedures to students. · Reviews radiographic performance results with students. Provides guidance for improvements in technical knowledge and skill. 4. Codes Charges for Billing · Upon completion of examinations, properly enters charges in EMR appropriately and completes the appropriate forms. · Cancels exams; enters credits and new charges if procedure is changed. · Helps provide any information and or assistance required to correct erroneous billings or during financial audits. 5. Performs additional duties as assigned. Competencies: · Ability to effectively send, receive and respond to information or instructions. · Ability to accurately identify and diagnose an issue or situation. · Self-motivated to perform job tasks. · Ability to perform procedures on patients of all ages. · Ability to restrain or hold helpless, uncooperative or combative patients, both adults and children, as required obtaining adequate quality imaging examinations. Adaptability - Demonstrates persistence and overcomes obstacles. Measures self against standard of excellence. Recognizes and acts on opportunities. Sets and achieves challenging goals. Takes calculated risks to accomplish goals. Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods. Continuous Learning- Assesses own strengths and weaknesses. Pursues training and development opportunities. Seeks feedback to improve performance. Shares expertise with others. Strives to continuously build knowledge and skills. Customer Service- Displays courtesy and sensitivity. Manages difficult or emotional customer situations. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. Problem Solving- Develops alternative solutions. Gathers and analyzes information skillfully. Identifies problems in a timely manner. Resolves problems in early stages. Works well in group problem solving situations. Teamwork - Balances team and individual responsibilities. Contributes to building a positive team spirit. Exhibits objectivity and openness to others' views. Gives and welcomes feedback. Puts success of team above own interests. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Graduate of a Radiologic Technology program Associate's degree or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. Language Ability: Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Speak effectively before groups of customers or employees. Mathematical Ability: Add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Compute rate, ratio and percent, and draw and interpret bar graphs. Reasoning Ability: Apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Deal with problems involving several concrete variables in standardized situations. Computer Skills: Microsoft Word; Familiarity with EMR systems a plus Certificates and Licenses: CPR certification. Registered (or registry eligible) by the American Registry of Radiologic Technologists. Preferred Certified as Renal Lithotripsy Specialist preferred Supervisory Responsibilities: None Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; reach with hands and arms and stoop, kneel and crouch. The employee is occasionally required to sit. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Job Type: Full-time Pay: $36.00 - $44.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Day shift, • Lithotripsy: 2 years (Preferred)

Job DescriptionBenefits: • Competitive salary, • Health insurance, • Opportunity for advancement, • Paid time off, • Successfully sell CNC machine tools and manufacturing solutions by establishing and building relationships with existing and new CNC machine tool customers., • Close sales and meet or exceed goals, • Visit customers to understand their business, uncover and anticipate needs, and propose appropriate solutions, • Partner with Applications Engineering staff for technical support and demonstrations, • Develop and present solutions that address specific customer needs and requirements, • Manage critical projects to ensure customer satisfaction, • Maintain strong collaborative relationships with all team members and departments, • Maintain an in-depth knowledge of the machine tool industry and product lines represented by the company and a thorough knowledge of competitor products and services, • Maintain CRM database; contacts, accounts, activities, forecast, quotes, etc.Requirements, • Intermediate to advanced knowledge of CNC machine tools and technology. Previous experience in a manufacturing environment, • Clear, concise, confident, and persuasive communicator. Excellent listening and questioning/clarifying skills. Effective writing skills., • Ability to creatively explain and present complex concepts in an easy-to-understand manner, • Self-directed and goal-orient, • Ability to stay organized and manage time effectively to meet daily, monthly, and annual goals. Excellent follow-up and tracking skills, • Creative and adaptable improviser with an ability to work through unforeseen obstacles, • Professional demeanor, • Must work well with others and have a team-focused approach, • Valid drivers license and acceptable driving record, • Salary/draw transitioning to commission. Initial salary/draw of $60,000-$80,000/year. Total potential earnings ranging from $90,000 - $150,000+/year, • Health Insurance Available. (80% Contribution from Company), • Mileage, • Expenses, • Cell phone, • Laptop, • On-going sales, product and technical training providedWe are committed to providing Equal Employment Opportunities to all employees and applicants.

Job Description Broad Statement of Responsibilities: The Primary Therapist at All Points North is responsible for delivering the highest standards of Trauma and Addiction treatment services within an inpatient residential treatment facility. This role involves providing individual and group counseling to patients and their families. As an integral member of the interdisciplinary team, the Primary Therapist develops individualized treatment plans tailored to each patient, focusing on targeted goals and executing therapeutic strategies. Carrying a dedicated caseload, the therapist works diligently to guide patients on their journey toward recovery and meaningful change. Primary Therapists play a crucial role in the care delivery system by building therapeutic rapport with patients to assess, address, and treat Trauma, Addiction, and Mental Health Disorders. Additionally, they support patients in addressing family dynamics, self-esteem, life skills, and other personal challenges. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education: This position requires LPC-A, LMFT-A, LMSW, LCSW, LMFT, LPC-in TX, a Graduate Degree in Social Work, Counseling, or Psychology from an accredited college or university. Experience: This position requires 3 plus years’ experience in the residential treatment of individuals with Addiction and Mental Health Issues. Trauma therapy experience preferred but not required. Special Skills & Knowledge: Must possess initiative and judgment capabilities to organize and plan activities, systematize procedures, promote favorable public relations, and make decisions affecting service delivery to consumers. Must be flexible to adjust to changing conditions and the various details of the job. Basic computer skills are required with Microsoft Office Suite and web-based products knowledge a bonus. Physical Requirements: The physical requirements described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Routine mobility includes standing, stooping, bending, lifting, walking, and running., • Regularly required to sit and work at a phone/computer workstation Essential Requirements: • High moral and ethical values, • Willingness to be open to learning and growing, • Interpersonal skills to work as an integral part of a treatment team, • Appropriate interpersonal/personal boundaries, • Ability to pass background, urine drug screen and criminal records tests; appropriate references; and transcript from master's program., • Follow NADAAC policies for ethical practice., • Maturity of judgment and behavior., • Ability to remain flexible to accommodate changes in work schedule., • Provide counseling services to individuals and families through a trauma-focused lens., • Facilitate psycho-educational, experiential, and process groups., • Maintain accurate and up-to-date progress notes, incident reports, and clinical documentation within the Electronic Medical Records (EMR) system., • Provide assessment, aftercare planning, and treatment for Detox, PHP, IOP, and OP programs., • Assist with case management for assigned clients., • Conduct an average of 4–6 therapeutic hours daily., • Collaborate with referral sources for ongoing client support and care coordination., • Complete documentation within required timelines and according to ethical standards of practice., • Attend meetings and supervision sessions requiring clinical input., • Monitor and follow up with aftercare services as indicated for clients., • Report regularly to the on-site Clinical Director., • Complete all required initial and annual training sessions., • Attend regular case staffings, reviews with clinical teams, in-service trainings, seminars, and classes as assigned., • Conduct psychosocial evaluations, create individualized treatment plans, complete ongoing treatment plan reviews, and develop discharge summaries., • Collaborate with the clinical team, case management team, referents, and families to develop and implement aftercare plans., • Provide therapeutic interventions to individuals, groups, and families as needed., • Provide consistent clinical updates to clients’ families and referents., • Evaluate individual and family systems, assess client functioning in work, family, and daily routines, and identify areas needing change, resources, and therapeutic intervention., • Tailor treatment strategies to the patient’s stage of dependence, readiness for change, and recovery needs., • Demonstrate an understanding of the principles of addiction, developmental trauma, and their roles in dysfunctional behaviors., • Understand the psychological, behavioral, physical health, and social effects of psychoactive substances on patients., • Demonstrate knowledge of evidence-based models and theories for treating trauma, addiction, and mental health disorders., • Develop, implement, and maintain partnerships with other community providers., • Perform clinical assessments, case management, consultations, referrals, and educational services according to the All-Points North Treatment Model., • Recognize and incorporate the importance of family, social networks, and community systems into the treatment and recovery process., • Understand and apply established diagnostic criteria for substance use disorders and describe appropriate treatment modalities and placement criteria., • Appreciate the importance of research and outcome data to inform clinical practice., • Understand and value an interdisciplinary approach to treatment., • Maintain the highest standards of ethical conduct and professional integrity., • Perform additional duties as assigned.

Job Description Build your best future with the Easy Ice team- Cool Careers Start Here! We’re a growing company that provides an all-inclusive commercial ice machine subscription to business owners nationwide. We’ve been changing our industry for the better since we started in 2009, and we’re not slowing down anytime soon. As a member of our team, you’ll be helping restaurants, bars, hospitals, hotels, and other businesses get the ice they need without spending a fortune or stressing out. We’ll invest in your professional development and overall quality of life because we know employee satisfaction is key to our success. Easy Ice doesn’t just want to be the #1 commercial ice machine solution in America—we also want to be one of the best places to work. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Easy Ice team and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer • Competitive pay, • Company Vehicle & Cell Phone, • Excellent Medical/Dental/Vision/Group Life, • 401k Company Match, • PTO and Holiday Pay, • Fitness Membership Reimbursement, • Hands on experience that promotes a growth-oriented culture, • Personal growth opportunities which encourages employees to “think outside the box”, • Challenging and meaningful work that fosters learning and development, • Fun fast-paced company culture and work environment, • Collaborative team environment to support and mentor each other, • Check us Out: Easy Ice What you will do: The Technician I is an exciting and dynamic position that will appeal to a creative, resourceful, high-energy, and organized person who thrives in service-oriented and customer-facing situations. The Technician I is responsible for the installation, preventative maintenance, servicing, and cleaning of our ice machines. This role is critical in ensuring the optimal functionality and cleanliness of our equipment to meet our customers’ service requirements while operating with proficiency. The technician will assist in troubleshooting issues, conduct routine inspections, and execute scheduled maintenance tasks under the supervision of senior technicians. The ideal candidate will possess a keen attention to detail, a commitment to maintaining equipment in good working order, and a willingness to learn and grow within the field of ice machine repair and maintenance. The Technician I is dedicated to driving service success that not only enhances customer satisfaction but also maximizes customer retention through reliable and responsive service. A successful Technician I will drive the following outcomes: • Increase the effectiveness and efficiency of the customer service experience by cleaning, installing and or repairing machines properly the first time, every time, • Increase the effectiveness and efficiency of the customer service experience by maintaining the proper truck stock and vehicle cleanliness and organization standards, • Leave every machine serviced in a condition that makes it easier for other Technicians to follow, • The Technician I performs duties as assigned including the installation of equipment, bagging/delivery of ice, cleaning, repairing, and maintaining ice machines. All levels of Technician - I, II, and III, are responsible for the installation, cleaning, and preventative maintenance of ice machine equipment as required, • Perform comprehensive servicing, installation, and thorough cleaning of ice machines per Easy Ice standard operating procedures to ensure optimal performance and cleanliness, • Communicate effectively with coworkers and customers to ensure all work orders and assignments are completed on time and per Easy Ice standard operating procedures, • Accurately document all actions performed during service visits by taking required photos, completing forms, reports, logs, and maintaining clear records of maintenance activities, • Ensure proper truck stock at all times, avoiding unnecessary return trips and delays in customer service, • Manage the pickup and delivery of ice as needed for service calls, ensuring timely and efficient service for customers, • Identify and report any additional actions required to enhance customer satisfaction, including recommendations for parts replacement, cleaning, or equipment repairs, • Facilitate the processing of accurate payments from customers and assist in the proper shutdown or removal of equipment when necessary, • Assist in maintaining a clean, organized, and safe work environment in the shop when applicable by adhering to all safety protocols and cleanliness standards Education: High school diploma or general education degree (GED) Vocational/Technical Training preferred Experience: • 1-2 years of experience in a customer service-oriented technical role or equivalent combination of education and experience preferred, • Previous experience with ice machines or HVAC maintenance or similar equipment is a plus, • Basic understanding of mechanical systems and electrical components related to ice machines or similar equipment, • Familiarity with troubleshooting techniques and standard repair practices, • Strong communication skills to effectively interact with customers and team members, • Problem solving abilities and a proactive approach to addressing issues, • Ability to manage time effectively and prioritize tasks to ensure service calls are completed in a timely manner, • Skills in maintaining organized records and documentation of service activities, • Demonstrated track record of delivering highest level of customer satisfaction Additional Required Attributes: • High-energy individual with a positive attitude and strong commitment to customer satisfaction, • Willingness to learn and adapt to new technologies and service protocols in the field of ice machine repair and maintenance, • The employee is often required to stand; walk; sit; use ladders; use hands to manipulate, handle, or feel surfaces, parts and tools; reach with hands and arms and stoop, kneel, crouch, or crawl, • Occasionally lift and/or move up to 75 pounds, • Stands for extended periods of time (6+ hours per day), • While the noise level in the work environment is usually somewhat quiet, the worker may be subject to elevated noise levels, • Drive a vehicle for up to 60 percent of the hours worked, • Ability to work flexible shifts and adapt to changing work schedules The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not intended to be an exhaustive list of all job duties performed by the personnel so classified. Easy Ice is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws.

Job Description Broad Statement of Responsibilities: The Psychiatric Nurse Practitioner (Psych NP) is a licensed practitioner responsible for managing mental health conditions and coordinating comprehensive psychiatric care for clients at All Points North. Working within State and Federal regulations and the standards of advanced nursing and psychiatric practice, the Psych NP provides patient-centered care through psychiatric assessment, diagnosis, treatment planning, medication management, therapeutic interventions, and ongoing evaluation of client progress. In this role, the Psych NP integrates evidence-based psychiatric care with medical oversight as needed, collaborating closely with a multidisciplinary treatment team to support holistic mental health and wellness. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • DEA license and eligibility to prescribe medications, • Experience in a psychiatric or behavioral health setting preferred., • Strong interpersonal skills and the ability to work within a multidisciplinary team., • Familiarity with electronic health records and standard clinical documentation practices., • BLS/CPR certification (required); ACLS preferred., • Graduate of an accredited school of nursing, • Graduate of an accredited Nurse Practitioner Program, • Current Advanced Practice Registered Nurse (APRN) Licensure Special Skills & Knowledge: Candidates should have the following skills and attributes: must be able to work and communicate well with people; be adaptable, and accept changes quickly and easily; be willing to address conflict appropriately. Basic computer skills are required with Microsoft Office Suite and web-based products knowledge a bonus. Physical Requirements: The physical requirements described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to walk, bend, stand, climb stairs, speak English, hear, use a telephone, drive an automobile, and operate standard office equipment, such as a computer, copier, and fax machine. Essential Requirements: • High moral and ethical values, • Willingness to be open to learning and growing, • Articulate, with interpersonal skills to work as an integral part of a team., • Must possess a valid driver’s license, appropriate references, and transcript from an accredited university., • Appropriate interpersonal/personal boundaries, • Maturity of judgment and behavior., • Ability to remain flexible to accommodate changes in work schedule., • Emphasize preventative care and disease management, • Complete psychiatric evaluations and assessments with development of treatment plan including other members of the treatment team, • Identify appropriate candidates for dTMS and ketamine treatment and provide administration of dTMS and ketamine treatments, • Serve as a consultant to staff in reference to physical health questions or concerns that arise within the agency, • Ability to perform H&Ps, • Respond to all duties in a clinically appropriate and timely manner, • Provide primary care services including health assessments, diagnosis, and treatment of common acute and chronic medical conditions for patients in the psychiatric facility., • Collaborate with psychiatrists, therapists, and other healthcare providers to develop integrated treatment plans that address both physical and mental health needs., • Monitor and manage the physical health side effects of psychotropic medications., • Order and interpret diagnostic tests and lab work; initiate appropriate interventions or referrals., • Educate patients and their families about medical conditions, medications, and healthy lifestyle habits., • Participate in interdisciplinary treatment team meetings and case conferences., • Maintain accurate and timely documentation in the electronic health record (EMR)., • Assist with crisis intervention and coordinate with emergency or inpatient services when necessary., • Support medication-assisted treatment (MAT) protocols if applicable., • Promote a trauma-informed, patient-centered approach in all care delivery.

Job Description Sr Automation Engineer Job Summary The Senior Automation Engineer will lead the design, implementation, and optimization of advanced automation systems to transform manufacturing operations. This strategic role requires deep technical expertise in robotics, control systems, and Industry 4.0 technologies to drive innovation, reduce costs, and enhance quality in high-volume production. The ideal candidate will mentor junior engineers and collaborate with cross-functional teams to develop cutting-edge automation solutions aligned with business objectives. Key Responsibilities 1. Advanced Automation Leadership • Architect and implement large-scale automation systems (robotic workcells, autonomous guided vehicles, smart conveyors) to replace manual processes, • Spearhead digital transformation initiatives including IIoT, machine learning, and digital twin implementations, • Serve as technical authority on safety standards (RIA R15.06, OSHA 1910.212) and risk assessments for automation projects 2. Technical Project Management • Lead capital projects ($500K-$5M scope) from concept to commissioning, including vendor selection and budget management, • Develop ROI models and present business cases to executive leadership, • Create and maintain technical documentation (system architectures, validation protocols, O&M manuals) 3. Systems Integration & Innovation • Design PLC/HMI/SCADA systems (Allen-Bradley, Siemens, Ignition) with MES/ERP integration, • Implement predictive maintenance systems using vibration analysis and machine learning, • Evaluate and pilot emerging technologies (cobots, 3D vision, edge computing) 4. Team Development & Continuous Improvement • Mentor junior engineers and technicians in automation best practices, • Conduct technology roadmapping to align automation strategy with business goals, • Lead Kaizen events to optimize existing automated systems Qualifications Education & Certifications • Required: BS/MS in Electrical, Mechanical, or Mechatronics Engineering, • Preferred: PE license, PMP, or Certified Automation Professional (CAP) Experience • 7+ years in industrial automation with 3+ years in senior/leadership roles, • Proven track record in:, • High-volume manufacturing (electronics, automotive, medical devices), • Full project lifecycle management (>$1M automation projects), • Advanced robotics (Fanuc, ABB, KUKA) and vision systems (Cognex, Keyence) Technical Expertise • Mastery of:, • PLC programming (Structured Text, Function Block Diagram), • Industrial networks (Ethernet/IP, Profinet, OPC UA), • Simulation tools (AutoCAD Electrical, Delmia, Process Simulate), • Working knowledge of:, • Python/C for automation scripting, • SQL for manufacturing data analysis

Job Description JOB SUMMARY The Manager/Director of Production and Facilities Engineering leads the Production and Facilities Engineering Team that provides design, standards, analytics, project identification and execution and continuous improvement in the Upstream and Midstream businesses. Supports the facilities and production engineering components of Design, Execution and Operations phases of the dCarbon Ventures (dCV) business. This role leads and/or works closely with operations leadership, project managers, engineers, technicians, 3rd party vendors, data and IT analysts, industry peers and partners to ensure cost-effective, efficient, safe, and timely delivery of production and facility engineering services for Upstream, Midstream businesses and components of the dCarbon Ventures business. RESPONSIBILITIES • Lead and manage a team of production and facility engineers and an engineering analyst to deliver on Upstream, Midstream and dCarbon Ventures business objectives., • Identify and implement strategic initiatives to optimize production, reduce costs/capital, and improve efficiency., • Work closely and collaboratively with operations and production field teams to optimize well performance, diagnose well problems and implement solutions, advise on artificial lift improvements, lower lease operating costs, oversee technical aspects of the production chemical program and achieve budgeted production targets., • Develop long term artificial lift strategy in partnership with production operations team., • Direct new well and refrac flowback methods, standards, cost reductions and interventions as appropriate., • Oversee technical delivery of upstream, midstream, and carbon capture new facilities ensuring fit-for-purpose design and on-time, quality delivery while meeting budget., • Provide engineering support for existing facilities in all businesses to increase reliability, asset integrity, and operational performance., • Accountable for Prosper modeling, FEED, Detailed Engineering, PHAs, and technical support for commissioning of projects., • Accountable for the workover and plugging programs identification and performance including developing yearly budgets, meeting program metrics and driving programmatic improvement., • Source and implement opportunities to use data to drive improvement in quality, timeliness, and efficiency of business decisions; develop or acquire tools required for such., • Oversee development of opportunities to utilize artificial intelligence, machine learning, and large language models to make a business impact., • Manage and mentor engineering staff, providing technical guidance and support., • Coordinate the Production and Facilities Engineering function with other internal and external teams to maximize value to the organization., • Oversee development of pipeline hydraulic models for internal midstream systems and manage 3rd party midstream technical relationships to ensure optimal gathering capacity and timely installation for upstream development programs. Build and refine fit-for-purpose processes to increase efficiency of technical and cross functional initiatives., • Provide technical guidance for company-wide projects such as system upgrades and technology projects., • Strong technical background in upstream production and facilities engineering is of paramount importance. Midstream and CO2 surface facilities engineering experience is preferred., • Deep experience with well performance and diagnostics, artificial lift, production optimization and lease operating cost reductions., • Knowledge of production engineering inflow performance software/tools, as well as pipeline and process modeling tools., • Business acumen, with cost/benefit approach and balance of cost, quality and project economics related to facilities., • Understanding of industry codes and standards (ASME, NACE, API, ASTM, etc.)., • Working knowledge of federal (EPA) and state-level regulatory frameworks governing production and facility engineering and operations., • Strong project management capabilities; able to juggle multiple priorities in a fast-paced environment., • Proficiency in Microsoft Office and relevant engineering tools., • Demonstrated experience leading teams, including performance management and development., • Leadership and management skills including achieving results through influence, guiding performance and development, and fostering a motivating and inclusive workplace., • Uses insights from digital tools and data analytics to improve performance; has a bias for AI and machine learning applications., • Ability to thrive in a dynamic fast-paced environment., • Ability to work independently and as part of a team., • Advanced interpersonal, collaboration and communication skills., • Advanced attention to detail, organization and prioritization., • Advanced cognitive, decision-making and problem-solving skills., • 10+ years of production and/or facilities engineering experience in oil and gas., • People leadership and supervisory experience at any level are strongly preferred., • This position is located in Fort Worth, Texas at BKV’s field office., • Some travel up to 15% may be required., • Hybrid of indoor and outdoor working environments, including field operations, depending on assignment.

Job Description All Points North is hiring a Full-Time Client Support Associate Shift: 3:00 PM – 11:00 PM | Weekends Required Join our dedicated team and play a key role in delivering exceptional client care and support during evening and weekend hours. We're seeking a compassionate, detail-oriented individual who thrives in a client-facing environment and is committed to supporting our mission of whole-person wellness. Broad Statement of Responsibilities: The Client Support Associate involved in the day to day operations of the client milieu. The CSA collaborates extensively with clinicians, nursing staff, hospitality, case management, and other patient caregivers and staff to ensure delivery of quality care and coordination of services. They work closely with clinical and hospitality leadership to coordinate systems related to measuring attendance, reporting program outcomes, milieu activities and client satisfaction. The CSA works closely with the Clinical Team and Hospitality Department on special projects as assigned. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Able to stand for 8+ hours, • Able to squat, bend, kneel, and lift 50 lbs, • Able to work with all departments at All Points North, • Extensive knowledge of KIPU EMR, • Time-management skills, • Capable of making good decisions, • Ability to handle pressure well, • Ability to deal with uncertainty Experience: 2+ years of experience working in clinical or hospitality settings with direct guest/client care, experience in clinical documentation systems Special Skills & Knowledge: Candidates should have the following skills and attributes: must be able to work and communicate well with people; be adaptable and accept changes quickly and easily; be willing to address conflict appropriately. Basic computer skills are required with Microsoft Office Suite and KIPU, web-based products knowledge a bonus. Physical Requirements: The physical requirements described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Routine mobility to include standing, stooping, bending, lifting, walking and running., • Regularly required to sit and work at a phone/computer workstation Essential Requirements: • High moral and ethical values, • Willingness to be open to learning and growing, • Exceptional communication skills, • Basic understanding of medical and clinical terminology, • Excellent organizational skills in order to ensure all patient needs are being met, • Ability to interact with a wide range of individuals each day, • Must possess a valid driver’s license, appropriate references, • Appropriate interpersonal/personal boundaries, • Maturity of judgment and behavior, • Completes and distributes the daily census and coordinating ongoing improvement of the census and related projects, • Produce timely and accurate information to communicate with other department heads regarding guest and departmental needs, • Works closely with the case management team to ensure coordination of case management tasks including admissions and discharge, • Review and aggregate patient outcome and satisfaction data, • Setting up KIPU accounts and managing access levels in KIPU, • Ensure all EHR are in KIPU and have been signed, • Develop and implement clinic policies and protocols, • Use computer software to admit and discharge patients, coordinate follow-up appointments and refer patients to specialists as needed, • Works to create efficient systems and workflows within the clinic, • Engages in ongoing tasks to develop policies and enhance processes and procedures, including ongoing performance improvement for clinical tasks, • Collaborates extensively between departments to coordinate the completion of assigned performance improvement tasks, • Works closely with leadership tasks on specialty projects as assigned, • Successfully plans and facilitates psycho educational groups., • Attends, scribes and enters notes in Kipu for clinically facilitated process, trauma, and experiential groups., • Client Transportation/facility transportation as needed

Job Description Broad Statement of Responsibilities: The Client Support Associate involved in the day to day operations of the client milieu. The CSA collaborates extensively with clinicians, nursing staff, hospitality, case management, and other patient caregivers and staff to ensure delivery of quality care and coordination of services. They work closely with clinical and hospitality leadership to coordinate systems related to measuring attendance, reporting program outcomes, milieu activities and client satisfaction. The CSA works closely with the Clinical Team and Hospitality Department on special projects as assigned. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Able to stand for 8+ hours, • Able to squat, bend, kneel, and lift 50 lbs, • Able to work with all departments at All Points North, • Extensive knowledge of KIPU EMR, • Time-management skills, • Capable of making good decisions, • Ability to handle pressure well, • Ability to deal with uncertainty Experience: 2+ years of experience working in clinical or hospitality settings with direct guest/client care, experience in clinical documentation systems Special Skills & Knowledge: Candidates should have the following skills and attributes: must be able to work and communicate well with people; be adaptable and accept changes quickly and easily; be willing to address conflict appropriately. Basic computer skills are required with Microsoft Office Suite and KIPU, web-based products knowledge a bonus. Physical Requirements: The physical requirements described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Routine mobility to include standing, stooping, bending, lifting, walking and running., • Regularly required to sit and work at a phone/computer workstation Essential Requirements: • High moral and ethical values, • Willingness to be open to learning and growing, • Exceptional communication skills, • Basic understanding of medical and clinical terminology, • Excellent organizational skills in order to ensure all patient needs are being met, • Ability to interact with a wide range of individuals each day, • Must possess a valid driver’s license, appropriate references, • Appropriate interpersonal/personal boundaries, • Maturity of judgment and behavior, • Completes and distributes the daily census and coordinating ongoing improvement of the census and related projects, • Produce timely and accurate information to communicate with other department heads regarding guest and departmental needs, • Works closely with the case management team to ensure coordination of case management tasks including admissions and discharge, • Review and aggregate patient outcome and satisfaction data, • Setting up KIPU accounts and managing access levels in KIPU, • Ensure all EHR are in KIPU and have been signed, • Develop and implement clinic policies and protocols, • Use computer software to admit and discharge patients, coordinate follow-up appointments and refer patients to specialists as needed, • Works to create efficient systems and workflows within the clinic, • Engages in ongoing tasks to develop policies and enhance processes and procedures, including ongoing performance improvement for clinical tasks, • Collaborates extensively between departments to coordinate the completion of assigned performance improvement tasks, • Works closely with leadership tasks on specialty projects as assigned, • Successfully plans and facilitates psycho educational groups., • Attends, scribes and enters notes in Kipu for clinically facilitated process, trauma, and experiential groups., • Client Transportation/facility transportation as needed

Job Description About Us At Autonomous Solutions, Inc. (ASI), we are a global leader in vehicle automation solutions. Our technology enables safe, efficient, and scalable automation for industries such as solar, agriculture, construction, landscaping, and more. With a commitment to innovation and excellence, ASI continues to push the boundaries of what is possible in autonomous technology. Our Mission is to help you reach your potential through innovative robotic solutions. We pride ourselves in our core values: Safe, Simple, Transparent, Growth, Humble, and Attention to Detail. About the Role We are hiring Perception Engineers across multiple levels (I-V) to join our autonomy team. Perception Engineers at ASI are responsible for designing, implementing, and deploying real-time perception systems that help unmanned ground vehicles (UGVs) interpret their surroundings and make intelligent decisions. The role includes sensor evaluation, sensor fusion, tracking, object detection, and deploying code to production systems. This position requires proficiency in C++11 or newer, strong sensor data processing skills (especially LiDAR), and the ability to develop robust, real-time algorithms. Perception Engineers collaborate with teams across ASI, including Embedded Software, Planning, Controls, and Systems Engineering, and work on platforms that operate in diverse and challenging environments. While the role currently includes 50% field deployment work, our goal is to shift toward 90% development.This is a hybrid position that requires three days (Tuesday through Thursday) on-site. Job Duties • Develop and deploy real-time perception algorithms using LiDAR, radar, cameras, and ultrasonic sensors., • Design and implement classical perception systems including sensor fusion, object tracking, and feature extraction., • Contribute to machine learning-based perception pipelines as appropriate to project needs., • Write clean, efficient C++ code optimized for embedded Linux environments., • Integrate perception software with existing robotic platforms using ROS2 or custom middleware., • Support field deployment and troubleshooting of perception systems (currently ~50% field work)., • Collaborate with architecture, planning, and control teams to ensure consistent interface design., • Participate in simulation, HIL testing, and field validation to ensure system robustness., • Analyze system performance and improve perception robustness in GPS-denied and adverse conditions. Perception Engineer I • 0-2 years of experience., • Bachelor's degree in Computer Science, Robotics, Electrical Engineering, or related field., • Familiarity with sensor data processing and basic C++ programming., • 2-4 years of experience., • Bachelor's or Master's degree., • Solid skills in C++11, sensor processing (e.g., LiDAR), and algorithm implementation., • 4-6 years of experience., • Master's degree preferred., • Leads development of specific perception features or modules., • 6+ years of experience., • Master's degree required., • Responsible for complex perception challenges including fusion across heterogeneous sensors., • 8+ years of experience., • Recognized expert in perception for autonomous systems., • Sets technical direction for perception architecture and strategy. Required: • Bachelor's degree required for Level I; Master's preferred/required for Levels II-V., • Proficiency in C++11 or newer., • Experience processing data from LiDAR, radar, or camera systems., • Familiarity with embedded Linux development., • Strong understanding of linear algebra and mathematical modeling., • Experience with ROS2, GPU processing, and embedded ML applications., • Background in object detection, classification, and tracking., • Experience with communication protocols (UDP, CAN, Serial)., • ASI offers a rich benefit package including:, • 401k with employer match, • Generous HSA contribution, • Employee Stock Ownership Plan, • PTO, Paid Holidays, and Flextime At Autonomous Solutions, Inc. (ASI), we are committed to fostering a diverse, inclusive, and equitable workplace where all employees and applicants have equal opportunities. We prohibit discrimination and harassment of any kind based on race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other legally protected characteristic. ASI complies with all applicable federal, state, and local laws regarding non-discrimination in employment and is dedicated to providing reasonable accommodations for individuals with disabilities throughout the hiring process. Job Posted by ApplicantPro

Job Description At ASI, we are revolutionizing industries with state-of-the-art autonomous robotics solutions. We deliver technologies that enhance safety, productivity, and efficiency. With our core values of Simplicity, Safety, Transparency, Humility, Attention to Detail and Growth guiding everything we do, we're shaping the future of automation in dynamic markets. As a Principal AI Scientist, you will play a critical role in developing and integrating advanced AI capabilities into ASI's autonomous systems. This position focuses on designing, training, testing, and deploying machine learning models that power core autonomy features such as perception, planning, and decision-making. Working closely with Data Scientists, Simulation Specialists, and Principal Architects, you will ensure ASI's AI solutions are production-ready, reliable, and continuously improving to meet operational demands. Responsibilities: * Design, develop, and train machine learning models for autonomy systems, including perception, planning, and control modules. * Design and implement AI-driven interfaces into the command-and-control software (e.g., Mobius), including large language model (LLM) integrations, to enable natural-language control and simplify complex vehicle configuration and command workflows. * Collaborate with Data Scientists to define feature requirements, understand data gaps, and improve model inputs. * Evaluate model performance using real-world and simulated data, refining approaches to ensure safe, robust behavior in complex environments. * Integrate AI models into ASI's software stack, ensuring they meet real-time, embedded, or edge-deployment requirements. * Partner with Simulation Specialists to test AI models in closed-loop simulations and synthetic environments. * Support continuous learning workflows by defining retraining strategies using operational field data. * Contribute to model deployment pipelines, monitoring, and lifecycle management to ensure reliability at scale. * Document model architectures, training procedures, evaluation results, and deployment configurations for internal knowledge sharing. Required Qualifications: * Bachelor's or Master's degree in Computer Science, Electrical Engineering, Robotics, Machine Learning, or a related field. * 3+ years of industry experience building and deploying machine learning models in production environments. * Strong proficiency in Python and ML libraries/frameworks (e.g., PyTorch, TensorFlow, scikit-learn). * Experience with real-world data preparation, feature engineering, and model evaluation. * Familiarity with time-series data and relational data modeling, with ability to design models that leverage both. * Familiarity with large language models (LLMs) and their application in building user-friendly, AI-powered control interfaces is highly desirable. * Solid understanding of core ML concepts, including supervised/unsupervised learning, model optimization, and validation techniques. * Experience deploying models to production, including on embedded systems or edge devices, is a strong plus. • Exposure to robotics, autonomous vehicles, sensor fusion, or control systems is highly desirable. At Autonomous Solutions, Inc. (ASI), we are committed to fostering a diverse, inclusive, and equitable workplace where all employees and applicants have equal opportunities. We prohibit discrimination and harassment of any kind based on race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other legally protected characteristic. ASI complies with all applicable federal, state, and local laws regarding non-discrimination in employment and is dedicated to providing reasonable accommodations for individuals with disabilities throughout the hiring process. Job Posted by ApplicantPro

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: MP Materials is seeking a highly skilled, hands-on and experienced Principal Process Engineer for its Magnetics business located in Fort Worth, TX. The Process Engineering team is responsible for starting up, maintaining, and continuously improving all the manufacturing processes at MP’s “Independence” facility for producing NdFeB magnets. The ideal candidate will possess deep technical expertise and working experience across powder production, powder metallurgy, and metal finishing manufacturing in a production environment. The Principal Process Engineer will lead the engineering efforts related to starting, running, and optimizing a diverse array of manufacturing processes, and drive consistent quality and innovation on the factory floor. The Principal Process Engineer will also be expected to mentor and direct a talented group of process engineers within their areas of responsibility. This is an opportunity to be a part of building our team, our factory, and our culture as the Magnetics team helps to define the future of American manufacturing. Position Responsibilities: • Provides expert technical guidance on manufacturing processes for sintered rare earth permanent magnets, with a focus on powder production, pressing and sintering, machining, and surface treatment., • Leads cross functional teams to commission and startup/validate each manufacturing process, working closely with the Quality team to successfully PPAP each process and machine., • Monitors KPIs to identify challenges and opportunities for process improvement, • Mentors and manage process engineers in the fulfillment of their duties, fostering a culture of continuous learning and professional development., • Lead the team in investigating and resolving quality issues from powder manufacturing to finished magnets., • Bachelor’s degree in relevant engineering discipline., • 10+ years of experience as a process engineer and/or engineering leader in a high-tech manufacturing environment., • 5+ years of experience leading engineering teams., • Deep technical knowledge in powder production, powder metallurgy, and/or metal finishing., • Working knowledge of statistical process control, and proven ability to implement and execute SPC in an industrial setting., • Hands-on experience in design, implementation, and operation of material manufacturing processes., • Ability to identify and solve problems and effectively advocate for those solutions to others (from engineers to operators to management)., • Excellent written and verbal communication skills, with the ability to synthesize and present status and progress of complex projects and technical work to diverse audiences., • Advanced degree in relevant engineering discipline., • Deep technical knowledge of manufacturing of rare earth sintered magnets., • Proficiency in failure mode effects analysis (FMEA) and root cause analysis (RCA). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description About the Opportunity: Come join one of the fastest-growing fintech startups in the U.S! At Jerry, we’re on a mission to help car owners save time and money on one of their most expensive and high maintenance assets. Since launching our mobile app in 2019, we have amassed over 5M customers, and expanded beyond insurance shopping to refinancing, safety and repairs to become the #1 rated AllCar app in the App Store. We are looking for a Remote Sales Agent who can work weekends and evenings to join our growing team! This role is 100% remote, we provide all work equipment needed. In this role, you will be responsible for helping prospective customers understand and choose the right insurance policies for them from one of Jerry's 55+ insurance carrier partners. All of our customers come to us directly from our mobile or web app, so no outbound calls needed. If you are looking for an opportunity to make a measurable difference in the lives of millions, we'd love to hear from you! Who you are: * You can multitask and manage multiple competing priorities * You are passionate about helping others How you will make an impact: * Respond to inbound calls from prospective customers for personal line auto and home insurance policies * Educate customers on insurance policy details such as coverage and pricing * Prepare and bind quotes through our carriers * Effectively problem solve and objection handle to remove barriers from the customer purchasing the policy with Jerry * Provide attentive, high energy conversation with customers that show we are actively engaged in finding a policy that best fits each individual's needs Compensation and perks: * Hourly wage: $18.00 - 20.00 plus uncapped commissions (on target annual earnings: $75,000-$100,000) * We will pay for your P&C license (expected within 2 weeks after starting) * Medical, dental, vision insurance, 401K match * Ability to work remotely (we provide work equipment) * Ongoing training and mentorship from our leadership team * An outstanding portfolio of insurance carriers and products - we work with over 55 carriers to ensure we can offer our customers the best options for them Available schedules: Schedule 1: Saturday & Sunday: 8am - 6:30pm ET Friday & Monday: 10:30am - 9pm ET Schedule 2: Monday - Thursday: 10:30am - 9pm Schedule 3: Tuesday, Thursday, Friday: 10am - 8:30pm ET Saturday: 8am - 6:30pm ET While we appreciate your interest and application, only applicants under consideration will be contacted. Jerry.ai is proud to be an Equal Employment Opportunity employer. We prohibit discrimination based on race, religion, color, national origin, sex, pregnancy, reproductive health decisions or related medical conditions, sexual orientation, gender identity, gender expression, age, veteran status, disability, genetic information, or other characteristics protected by applicable local, state or federal laws. Jerry.ai is committed to providing reasonable accommodations for individuals with disabilities in our job application process. If you need assistance or an accommodation due to a disability, please contact us at The successful candidate’s starting pay will fall within the pay range listed on this job posting, determined based on job-related factors including, but not limited to, skills, experience, qualifications, work location, and market conditions. Ranges are market-dependent and may be modified in the future. In addition to base salary, the compensation may include opportunities for equity grants. We offer a comprehensive benefits package to regular employees, including health, dental, and vision coverage, paid time off, paid parental leave, 401(K) plan with employer matching, and wellness benefits, among others. Equity opportunities may also be part of your total rewards package. Part-time, contract, or freelance roles may not be eligible for certain benefits. About Jerry.ai: Jerry.ai is America’s first and only super app to radically simplify car ownership. We are redefining how people manage owning a car, one of their most expensive and time-consuming assets. Backed by artificial intelligence and machine learning, Jerry.ai simplifies and automates owning and maintaining a car while providing personalized services for all car owners' needs. We spend every day innovating and improving our AI-powered app to provide the best possible experience for our customers. From car insurance and financing to maintenance and safety, Jerry.ai does it all. We are the #1 rated and most downloaded app in our category with a 4.7 star rating in the App Store. We have more than 5 million customers — and we’re just getting started. Jerry.ai was founded in 2017 by serial entrepreneurs and has raised more than $240 million in financing. Join our team and work with passionate, curious and egoless people who love solving real-world problems. Help us build a revolutionary product that’s disrupting a massive market.

Job Description All jobs at Southern Champion Tray (SCT) require Team members to act in accordance with the shared Core Values and Operating principles of the company as they perform specific job functions. These include: • Trustworthy – We strive for our actions to match our words in all our relationships., • Servant – Hearted – We enable and empower our team to serve the needs of customers, Team members, suppliers and the community., • Relational – We aim to build healthy relationships while fostering an environment that promotes compassion, balance, and personal and professional growth. The First Press Operator is responsible for the safe set up and operation of the conventional, sheet-feed printing press. Provides direction to print crew and ensures optimum print quality and production efficiencies are achieved at a consistent rate of speed in accordance with machine standards and customer specifications. SECONDARY RESPONSIBILITIES: • Coordinates with operators and/or Lead from previous shift to assess status of production run and including critical information or obstacles; reviews production schedule of upcoming jobs for the current shift., • Thoroughly reviews job ticket instructions to determine printing specifications, machine set up procedures, and supplies needed; follows instructions issued advising the Supervisor or Lead of any incorrect or non-recorded information necessary for proper set up and operation., • Sets up and safely starts machine in an efficient manner with minimal downtime; adjusts controls as needed to achieve optimum print quality at target run speeds; communicates with 2nd Press Operator throughout the production run to monitor and ensure efficiencies and quality standards are met; provides oversight and direction to 2nd Press Operator., • Actively utilizes the instruments and technology provided, including densitometers and color management or color control technology, to consistently monitor and adjust print settings and conditions to maintain color consistency and quality; performs adjustments necessary to achieve ink and water balance, including LED links when applicable, to hold consistent color that aligns with customer approved proofs and customer standards., • Consistently performs all quality checks before, during and after the production run; obtains all required approvals in accordance with SCT Quality standards and procedures to verify and ensure accuracy, clarity and quality of print including correct viscosity, color, shading, contrast, straining and ink usage., • Documents and reports all non-conforming products per SCT quality procedures; reports information to Quality Technicians and works with Supervisor and/or Lead to resolve., • Accurately and completely records information required after each job on production reports and/or in computer; maintains accurate logs of productivity, maintenance, and downtime., • Assists with training and coaching new Press Operators with learning required job responsibilities, as well as safety and quality procedures, necessary to perform the job; actively assists with training 2nd Press Operators and/or Print Apprentice to learn the duties and skills necessary to perform the responsibilities of a First Press Operator., • Actively seeks and adopts new updates and improvements to processes, new procedures, and innovations, which would add to the efficiency and safety of the operation; participates on Continuous Improvement project teams as requested to assist with identifying and implementing improvements in the department., • Participates during press checks as a representative of SCT with the customer to answer questions and take steps necessary to ensure customer specifications are satisfied., • Consistently maintains a clean work environment in accordance with Food Safety and 5S program to include the machine, desks, floors, and overall work area; ensures compliance with GMP and Food Safety requirements at all times., • Communicates effectively with other team members throughout the shift and at shift change to share critical information necessary to perform the job safely and efficiently; collaborates regularly with Quality Technicians/Supervisor to obtain necessary approvals and to ensure quality standards are consistently met., • Operates press with the skill necessary to produce quality product safely and successfully in a manner that keeps down time and waste to a minimum; utilizes machine downtime in a resourceful manner including training or assisting others, clean up, projects, or performing other tasks necessary within the department., • Consistently follows all safety related policies, rules, regulations, technical instructions, and guidelines; uses situational awareness and actively looks for weak signals to identify unsafe behaviors and conditions; consistently wears appropriate PPE for the task at hand and within the assigned area., • Attends training classes as assigned. QUALIFICATIONS: EDUCATION and/or EXPERIENCE: High school diploma or (GED); requires a minimum of 5 years experience operating a large format, sheet-fed conventional press; experience in the folding carton industry required; experience with LED inks is preferred; must have basic computer skills with the ability to effectively utilize software and other technology; requires mechanical abilities and skills. LANGUAGE SKILLS: Must have the ability to read and understand documents, letters, etc. and write legibly in English. Must be able to understand and speak clearly, communicate, and understand directions in English as needed. 2nd Shift - 3pm - 11pm Mansfield Plant - 949 South Sixth Ave, Mansfield, TX 76063

Job Description All jobs at Southern Champion Tray (SCT) require Team members to act in accordance with the shared Core Values and Operating principles of the company as they perform specific job functions. These include: • Trustworthy – We strive for our actions to match our words in all our relationships., • Servant – Hearted – We enable and empower our team to serve the needs of customers, Team members, suppliers and the community., • Relational – We aim to build healthy relationships while fostering and environment that promotes compassion, balance, and personal and professional growth. Responsible for the safe set up and operation of the feeder area of the conventional sheet-fed printing press. Ensures that quality products are achieved at a consistent rate of speed in accordance with machine standards and customer specifications. SECONDARY RESPONSIBILITY: • Assesses status of production run from previous shift and reviews production schedule of upcoming jobs for the current shift., • Reviews job ticket instructions to determine customer specifications, machine set up procedures, supplies needed and other job ticket instructions., • Consistently follows all instructions on the job ticket advising the Supervisor or Lead of any incorrect or non-recorded information necessary for proper set up and operation., • Prepares for next production run; retrieves and transports skids / pallets of the correct substrate of sheeted paperboard and stages at the feeder section of the press., • Prepares all make ready (pre-flight) materials and supplies needed to produce the next scheduled job including pulling and staging correct inks, printing plates, proofs and job jackets prior to the next scheduled job., • Reviews and records ink levels at the completion of each production run., • Thoroughly cleans and inspects ink towers after each production run; sets up new ink towers per job ticket instructions., • Inspects paperboard for quality and any defects; sets up feeder and feeder transfer table per job specifications; adjusts and sets controls in a consistent manner and makes machine adjustments as necessary to attain target run speeds and efficiency goals., • Loads skids/pallets of sheeted paperboard into feeder of press; consistently monitors and safely feeds paper into machine throughout production run in an efficient manner., • Assists First Press Operator with performing quality checks before, during and after production run and in accordance with SCT Quality standards and procedures to verify accuracy and clarity of print., • Processes a sample of the final printed sheet through verification system to validate the content and ensure that it aligns with customer proof., • Monitors, troubleshoots, diagnoses and corrects or repairs issues as they occur, using all of the enhanced tools and technology available; contacts the Supervisor or Lead for assistance when necessary., • Train and assist new 2nd Press Operators with learning the job responsibilities including safety and quality procedures., • Performs routine cleaning and scheduled preventative maintenance in accordance with the required cleaning and maintenance schedule., • Consistently maintains a clean work environment in accordance with Food Safety and 5S program to include the machine, desks, floors, and overall work area., • Communicates effectively with other team members throughout the shift and at shift change to share critical information necessary to perform the job safely and efficiently; collaborates regularly with Quality Technicians/Supervisor to obtain necessary approvals and to ensure quality standards are consistently met., • Actively seeks and adopts new updates and improvements to processes, new procedures, and innovations, which would add to the efficiency and safety of the operation., • Develops knowledge and skill necessary to successfully produce product in a manner that safely keeps down time to a minimum; utilizes machine downtime in a resourceful manner assisting with set- up, clean up, projects, or performing other tasks necessary within the department., • Follows all safety related policies, rules, regulations, technical instructions, and guidelines; uses situational awareness and actively looks for weak signals to identify unsafe behaviors and conditions; consistently wears appropriate PPE for the task at hand and within the assigned area., • Assists other team members with duties in other areas or departments as requested. AUTHORITY: In the absence of the First Press Operator, the Second Press Operator must have the ability to lead a crew that has been placed with them to execute the demands of the printing operation efficiently and to respond to oral instructions from his/her supervisor and other written instructions. QUALIFICATIONS: EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); one to three months of related experience; experience operating or feeding a large format press, is preferred; folding carton industry experience is a plus. Must have basic computer skills and possess ability to utilize software. Must have mechanical ability and skills. LANGUAGE SKILLS: Must have the ability to read and understand documents, letters, etc. and write legibly in English. Must be able to understand and speak clearly, communicate, and understand directions in English as needed. 2nd Shift (5 Day/8 Hour) - 3:00 PM - 11:00 PM CT Mansfield Plant - 949 South Sixth Avenue, Mansfield, TX 76063

Job Description We’re hiring a Manufacturing Associate for our Arlington, TX plant! If you're looking for an exciting opportunity to be part of a great team, this could be the perfect fit. Apply now and take the next step in your career! Shift: 2nd Shift 1:30 PM to 10:00 PM Pay: $12.00 - $14.99 Production Worker Duties and responsibilities • Pack and seal printing products in the assign boxes according to the size and quantity., • Operating and learning large format equipment across printing, cutting, fabrication, packing, and shipping, • Load materials and products into package processing equipment., • Measure, weight, and count products and materials., • Read shipping labels and ensure correct quantity/product packaged., • Check orders on computers using the company’s database., • Communicate with the management team to ensure all duties assigned are completed., • Ensure that a clean and orderly work area is stocked with boxes and packing paper., • Report any and all workplace hazards to management immediately., • Perform scheduled maintenance., • Maintaining efficiency while meeting quality standards and deadlines, • Taking on additional responsibilities as skills grow and business needs require, • Following safety guidelines and maintaining a clean, organized workspace, • Communicate equipment and material problems with management and vendors in a timely manner., • Perform scheduled color and image quality tests and notify manager upon found issues., • At least 1 year of experience in a manufacturing environment., • Ability to communicate effectively in English and with team members, • Strong customer service mindset and pride in quality work, • Ability to operate warehouse equipment safely (e.g., pallet jack), • Ability to work independently with minimal supervision, • Ability to follow verbal and written instructions accurately, • Comfortable using computers and related systems, • Adaptable and eager to learn new processes, • Strong time management in a fast-paced environment, • High attention to detail, • Reliable and takes initiative when needed, • Physically capable of working in a production environment, • Standing/Walking (at least 75% of shift), • Lifting/Pushing/Pulling up to 50 lb. (at least 50% of shift) What are the perks and benefits of working at Digital Room? • Collaborate with leading print professionals in a fast-paced, high-tech, safe, and enjoyable environment, • Competitive pay and growth opportunities., • Comprehensive health, dental, and vision coverage (location-specific). -Cigna & Humana, • Employer match 401(k) up to limits.- Empower, • Company-sponsored Life and AD&D Insurance., • Flexible Spending Account and voluntary benefits., • Paid holidays and PTO., • Employee discounts on all products., • Company-sponsored training and certifications.

We are looking for talented Machine Learning Engineers to join us and be part of this journey. Machine Learning sits at the intersection of a number of different disciplines: Computer Science, Statistics, Operations Research, Data Science, and others. A diverse range of data skills, including experi

Crossing Hurdles is a recruitment firm that assists our clients to hire best talent.It is a Cognitive AI platform that automates low-level cognitive tasks involving clinical data and knowledge - tasks that underlie patient care, revenue cycle, clinical research, and population health.Bay Area team m

SuperAnnotate is a fast-growing, Series B startup revolutionizing the field of AI-data Infrastructure.We specialize in providing cutting-edge data pipeline solutions for Machine Learning, LLM, and GenAI solutions to large enterprise clients, helping them leverage the power of AI to transform their b

Design, develop, and maintain machine learning systems, including generative AI and speech recognition models.

The Machine Learning Engineer must write clean, performant, reusable code using existing and emerging technology in order to ensure high availability and performance of our machine learning applications. We are looking for an energetic team member with a desire to explore, innovate and drive industr

As the Staff Machine Learning Engineer for this team, you will work with a cross-functional team to define and execute a Machine Learning technical strategy for the product area. You have a strong background in machine learning, with experience and expertise in machine learning algorithms. Lead the

Get notified about new Machine Learning Engineer jobs in San Francisco, CA.

The Responsible AI team is part of the Advanced Technologies Group (ATG), Pinterest's advanced machine learning team. ATG's goal is to keep Pinterest at the forefront of machine learning technology across multiple use cases including recommendations, ranking, content understanding, and more.

Quix Recruitment is partnering with a cutting-edge fintech firm to hire an Applied Machine Learning Engineer to develop and deploy machine learning models that optimize trading strategies and risk management solutions. Develop, test, and deploy machine learning models for financial datasets. Experim

Proficiency in machine learning with experience in areas such as Generalized Linear Models, Gradient Boosting, Deep Learning, and Probabilistic Calibration. Get notified about new Machine Learning Engineer jobs in. Senior ML Engineer, Applied Machine Learning.

We’re looking to hire a Machine Learning Engineer in our Modeling & Large Language Models team. Help solve fundamental problems in machine learning, natural language understanding and human computer interaction with applicability to practical commercial use cases. Experience building/refining/inno

Tagged as: Artificial Intelligence Jobs, Cloud Computing Careers, Machine Learning Engineer, Python Developer Remote, Remote AI Jobs. ADHD, and other learning challenges.

Who is Martin Sprocket & Gear? Martin is a progressive leader in the Power Transmission and Bulk Material Handling Industry, classified as an essential business. We are proud of our rich heritage dating back to our beginning in 1951 as a family-run organization. Fast forward to today, we have more than 25 locations in North America. Why is it great to work for us? As an employer of choice, we offer a stable work environment with equal leadership development and career growth opportunities. We take great pride in our people and believe they are our greatest asset. \n • Affordable Medical, Pharmacy, and Dental\n, • Employee Wellness Plan\n, • Life and Disability Insurance\n, • 401k Profit Trust Plan\n, • PTO\n, • Growth Opportunities\n, • Competitive Pay\n, • Company Holidays\n, • 2nd Shift - 6% added to hourly wage\n, • 3rd Shift - 8 % added to hourly wage\n\n\n What will you do? In this role, you will be involved in the machining or processing of metal and non-metallic parts by operating CNC Milling Machines. Key Responsibilities: \n • Set up and operate CNC Lathe machines to perform tasks such as turning, drilling, bar feeder, and live tooling.\n, • Optimize set-up times, maximize machine utilization\n, • Ability to run CNC vertical mills/robo drills\n, • Understand specifications of the tasks by reading blueprints, route instructions\n, • Experience in Geometric Dimensioning and Tolerancing (GD&T)\n, • Troubleshoot programs and make adjustments when needed\n, • Setup CNC lathe machines to complete full cycles to produce a high and low volume of parts, improve productivity, maintain offsets, and inspect parts with a high degree of precision\n, • Follow the in-process part inspection process, and notify the Supervisor/Lead on the occurrence of non-conformance.\n, • Communicate with superintendents, managers, production control, and quality personnel for assignments, and resolve quality issues.\n, • Work safely and wear all required PPE for the duration of the shift. \n, • Document all issues written to ensure a smooth transition between shifts\n, • Check and perform preventive maintenance daily\n, • Schedule: 2nd Shift, Monday - Friday, {3:00 PM - 11:00 PM}.\n\n What are we looking for? We're looking for engaged individuals who are adaptable to a changing environment, take pleasure in learning, and enjoy working with others. Key Competencies: \n • Knowledge of all required measuring equipment which includes calipers, gauges\n, • Proficient math skills\n, • Ability to document machining procedures \n, • Knowledge of metals, part-holding fixtures, and lathe/mill tooling\n, • Experience in Okuma, Mazak, and Mori lathe machines preferred\n, • Simple oral communication skills; ability to read and comprehend instructions written in English and complete simple logs and reports in English\n, • Physically able to handle heavy items, including lifting, pushing, pulling, and positioning components\n, • Work scheduled hours and comply with the company's timekeeping policy and all other company policies\n, • Ability to work in a non-climate-controlled shop environment\n, • Consistently stand for an entire shift\n, • Strong knowledge of machining practices and materials is a must, as is general mechanical knowledge\n, • Willingness to be trained with a desire to learn\n, • Ability to work in a team setting\n, • Great work ethic, reliable, positive attitude\n\n To perform this job successfully, you must be able to report daily to the company's Arlington, TX branch to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified candidates with disabilities to perform the essential functions of the job. Disclaimers The above statements are intended to describe the general nature and level of work being performed by candidates applying for this specific role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of candidates hired. Martin Sprocket & Gear is an EEO Employer and E-Verify participating employer and we do not discriminate based on race, religion, national origin, sex, sexual orientation, gender identity, age, physical or mental disability, marital status, or veteran status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Experience working at the intersection of machine learning research and engineering.

Build cutting edge technology using the latest advances in deep learning and machine learning to personalize Pinterest. End-to-end hands-on experience with building data processing pipelines, large scale machine learning systems, and big data technologies (e. With more than 500 million users around

Collaborate with Research and Engineering teams to productionize internal machine learning models. Implement machine learning solutions, such as prompt engineering, lightweight fine-tuned models, post-processing, that extend 3D foundation model inputs and outputs for 3D foundation models.

As a Staff Machine Learning Engineer at Ocrolus, you’ll be a hands-on technical leader who helps shape the future of our machine learning systems. Design and implement essential machine learning infrastructure and tools that support multiple teams, streamlining workflows and improving efficiency a

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position: Welder B - GMAW/GTAW Responsible for building components used in the manufacturing process. Performs complex tasks related to welding fabrication. Fit up, tack weld and final weld out of ASME pressure tanks. This position is responsible for ensuring that all welding is completed with the qualified Weld Procedure Specification (WPS). To ensure that product is built to required code specifications and approved Engineering drawing. This position reports to the Lead man of the designated area. This role is based at our Fort Worth, Texas location and may be placed on our 1st or 2nd shift. This position will be on the manufacturing floor and will be responsible for utilizing the Kiosks located throughout the shop. Primary Job Duties and Responsibilities \n • Pulls parts listed on the bill of material (BOM) and checks against blueprints and work orders.\n, • Follows rules that are required by ASME Section 1, Section IV, HLW, and Section VIII Division 1.\n, • Builds parts according to working instructions and engineered production drawings.\n, • Performs duplex stainless steel and carbon steel welding.\n, • Checks all tools and performs preventive maintenance.\n, • Changes out consumables and assists with the maintenance of tools.\n, • Check overhead cranes to ensure they are functioning properly. Complete daily crane safety logs.\n, • Utilizes crane and/or forklift for material handling.\n, • Assists with the inspection of parts and inventory reviews.\n, • Attend regular safety meetings and training.\n, • Gathers, cleans, and inspects safety gear.\n, • Organizes and cleans work area daily.\n, • Provides guidance and answers questions for colleagues with less experience.\n, • Assume responsibility for other projects and duties as assigned by Supervisors and/or managers and other applicable Company management teams.\n, • Responsibility directly tied to Watts Value (Integrity, Accountability, Continuous Improvement, Transparency)\n, • Travel Requirements: Less than 5% of travel. Examples of travel: Inner company training, Offsite training, offsite repairs.\n\n Required Qualifications \n • High School or equivalent.\n, • 3-year experience in welding fabrication. ASME experience a plus.\n, • Requires a current forklift license (Training and Certification issued by Watts)\n, • Ability to use and understand dimensional tools including tape measure, calipers, and weld gauges.\n, • Aptitude to read blueprints and welding symbols.\n, • Ability to follow instructions.\n, • Good communication skills.\n, • Ability to pass a 2G GMAW Welding Test\n, • Ability to pass a 2G GTAW Welding Test\n, • Initiative to self-train and advance to Welder A. 6G pipe test required for advancement.\n\n Preferred Qualifications \n • 3-5 years ASME pressure vessel fabrication experience\n, • Combination welder (GMAW, GTAW)\n, • Experience with Duplex Stainless Steel and/ or welding Exotic materials.\n, • Fanuc robot programming and operation.\n, • Lincoln Electric welder machine experience. Setting, adjusting and programming. \n\n General Applicable Company Competencies \n • Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency.\n, • Punctuality and dependability.\n, • Ability to be flexible and adapt to changing work priorities and stressful conditions.\n, • Adherence to all personnel policies, procedures, and standards of process as implemented by Watts.\n, • Maintain productive and collaborative relationships with other Watts employees.\n, • Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action.\n\n Working Conditions: While performing the job duties, you will be working on-site in a manufacturing facility. You will be required to work at the Company's Fort Worth, Texas location. Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: \n • Ability to stand for long periods of time.\n, • Ability to lift and carry up to 40 pounds.\n, • Ability to push and pull up to 150 pounds.\n, • Ability to physically move around manufacturing floor.\n, • Ability to read documents and communicate clearly with management and coworkers.\n, • Ability to wear personal protective equipment, which may include, but is not limited to, safety shoes, hearing protection, safety glasses, welding hood including a forced air induction welding hood.\n\n Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. This position is on site at Watts Fort Worth, Texas location #LI (Onsite) Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. \n • Competitive compensation based on your skills, qualifications and experience\n, • Comprehensive medical and dental coverage, retirement benefits\n, • Family building benefits, including paid maternity/paternity leave\n, • 10 paid holidays and Paid Time Off\n, • Continued professional development opportunities and educational reimbursement\n, • Additional perks such as fitness reimbursements and employee discount programs\n How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

Who is Martin Sprocket & Gear? Martin is a progressive leader in the Power Transmission and Bulk Material Handling Industry, classified as an essential business. We are proud of our rich heritage dating back to our beginning in 1951 as a family-run organization. Fast forward to today, we have more than 25 locations in North America. Why is it great to work for us? As an employer of choice, we offer a stable work environment with equal leadership development and career growth opportunities. We take great pride in our people and believe they are our greatest asset. \n • Affordable Medical, Pharmacy, and Dental\n, • Employee Wellness Plan\n, • Life and Disability Insurance\n, • 401k Profit Trust Plan\n, • PTO\n, • Growth Opportunities\n, • Competitive Pay\n, • Company Holidays\n\n What will you do? In this role, you will be involved in the machining or processing of metal and non-metallic parts by operating CNC Turning Machines. Key Responsibilities: \n • Setup and operate CNC Lathe machines to perform tasks such as turning, drilling, bar feeder, live tooling.\n, • Optimize set up times, maximize machine utilization\n, • Ability to run CNC vertical mills/robo drills\n, • Understand specifications of the tasks by reading blueprints, route instructions\n, • Experience in Geometric Dimensioning and Tolerancing (GD&T)\n, • Troubleshoot programs and make adjustments when needed\n, • Setup CNC lathe machines to complete full cycles to produce a high and low volume of parts, improve productivity, maintain offsets and inspect parts with a high degree of precision\n, • Follow in-process part inspection process, notify Supervisor/Lead on the occurrence of non-conformance.\n, • Communicate with superintends, managers, production control, quality personnel for assignments, and resolve quality issues.\n, • Document all issues written to ensure a smooth transition between shifts\n, • Check and perform preventive maintenance daily\n\n What are we looking for? We're looking for engaged individuals that are adaptable to a changing environment, take pleasure in learning and enjoy working with others. Key Competencies: \n • Know how to use all required measuring equipment which includes caliper, gauges, to ensure quality\n, • Proficient math skills\n, • Ability to document machining procedures \n, • Knowledge of metals, part holding fixtures, and lathe/mill tooling\n, • Experience in Okuma, Mazak, Mori lathe machines will be preferred\n, • Simple oral communication skills; ability to read and comprehend instructions written in English and complete simple logs and reports in English\n, • Physically able to handle heavy items, including lifting, pushing, pulling, and positioning components\n, • Work scheduled hours and comply with the company's timekeeping policy and all other company policies\n, • Consistently stand for an entire shift\n, • Strong knowledge of machining practices and materials is a must, as is general mechanical knowledge\n, • Willingness to be trained with a desire to learn\n, • Ability to work in a team setting\n, • Great work ethics and reliable\n, • Positive attitude\n, • Education - Required, High School or better\n, • Experience - Preferred, Five years of CNC Lathe Setup, programming, and operating.\n\n Schedule : 1st Shift, Monday - Friday, 7:00AM - 3:00PM To perform this job successfully, you must be able to report daily to the company's Arlington, TX branch to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified candidates with disabilities to perform Disclaimers The above statements are intended to describe the general nature and level of work being performed by candidates applying for this specific role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of candidates hired. Martin Sprocket & Gear is an EEO Employer and E-Verify participating employer and we do not discriminate based on race, religion, national origin, sex, sexual orientation, gender identity, age, physical or mental disability, marital status, or veteran status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position: Welder B - GMAW/GTAW Responsible for building components used in the manufacturing process. Performs complex tasks related to welding fabrication. Fit up, tack weld and final weld out of ASME pressure tanks. This position is responsible for ensuring that all welding is completed with the qualified Weld Procedure Specification (WPS). To ensure that product is built to required code specifications and approved Engineering drawing. This position reports to the Lead man of the designated area. This role is based at our Fort Worth, Texas location. This position will be on the manufacturing floor and will be responsible for utilizing the Kiosks located throughout the shop. Primary Job Duties and Responsibilities \n • Pulls parts listed on the bill of material (BOM) and checks against blueprints and work orders.\n, • Follows rules that are required by ASME Section 1, Section IV, HLW, and Section VIII Division 1.\n, • Builds parts according to working instructions and engineered production drawings.\n, • Performs duplex stainless steel and carbon steel welding.\n, • Checks all tools and performs preventive maintenance.\n, • Changes out consumables and assists with the maintenance of tools.\n, • Check overhead cranes to ensure they are functioning properly. Complete daily crane safety logs.\n, • Utilizes crane and/or forklift for material handling.\n, • Assists with the inspection of parts and inventory reviews.\n, • Attend regular safety meetings and training.\n, • Gathers, cleans, and inspects safety gear.\n, • Organizes and cleans work area daily.\n, • Provides guidance and answers questions for colleagues with less experience.\n, • Assume responsibility for other projects and duties as assigned by Supervisors and/or managers and other applicable Company management teams.\n, • Responsibility directly tied to Watts Value (Integrity, Accountability, Continuous Improvement, Transparency)\n, • Travel Requirements: Less than 5% of travel. Examples of travel: Inner company training, Offsite training, offsite repairs.\n\n Required Qualifications \n • High School or equivalent.\n, • 3-year experience in welding fabrication. ASME experience a plus.\n, • Requires a current forklift license (Training and Certification issued by Watts)\n, • Ability to use and understand dimensional tools including tape measure, calipers, and weld gauges.\n, • Aptitude to read blueprints and welding symbols.\n, • Ability to follow instructions.\n, • Good communication skills.\n, • Ability to pass a 2G GMAW Welding Test\n, • Ability to pass a 2G GTAW Welding Test\n, • Initiative to self-train and advance to Welder A. 6G pipe test required for advancement.\n\n Preferred Qualifications \n • 3-5 years ASME pressure vessel fabrication experience\n, • Combination welder (GMAW, GTAW)\n, • Experience with Duplex Stainless Steel and/ or welding Exotic materials.\n, • Fanuc robot programming and operation.\n, • Lincoln Electric welder machine experience. Setting, adjusting and programming. \n\n General Applicable Company Competencies \n • Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency.\n, • Punctuality and dependability.\n, • Ability to be flexible and adapt to changing work priorities and stressful conditions.\n, • Adherence to all personnel policies, procedures, and standards of process as implemented by Watts.\n, • Maintain productive and collaborative relationships with other Watts employees.\n, • Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action.\n\n Working Conditions: While performing the job duties, you will be working on-site in a manufacturing facility. You will be required to work at the Company's Fort Worth, Texas location. Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: \n • Ability to stand for long periods of time.\n, • Ability to lift and carry up to 40 pounds.\n, • Ability to push and pull up to 150 pounds.\n, • Ability to physically move around manufacturing floor.\n, • Ability to read documents and communicate clearly with management and coworkers.\n, • Ability to wear personal protective equipment, which may include, but is not limited to, safety shoes, hearing protection, safety glasses, welding hood including a forced air induction welding hood.\n\n Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. This position is on site at Watts Fort Worth, Texas location #LI (Onsite) Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. \n • Competitive compensation based on your skills, qualifications and experience\n, • Comprehensive medical and dental coverage, retirement benefits\n, • Family building benefits, including paid maternity/paternity leave\n, • 10 paid holidays and Paid Time Off\n, • Continued professional development opportunities and educational reimbursement\n, • Additional perks such as fitness reimbursements and employee discount programs\n How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

Director of Software and Machine Learning. Director, Machine Learning Engineering - Video AI. Get notified about new Head of Machine Learning jobs in.

Machine Learning Engineer - Modeling. We’re looking to hire a Machine Learning Engineer in our Modeling & Large Language Models team. Help solve fundamental problems in machine learning, natural language understanding and human computer interaction with applicability to practical commercial use ca

Build cutting edge technology using the latest advances in deep learning and machine learning to personalize Pinterest. With more than 500 million users around the world and 300 billion ideas saved, Pinterest Machine Learning engineers build personalized experiences to help Pinners create a life the

The Machine Learning Engineer must write clean, performant, reusable code using existing and emerging technology in order to ensure high availability and performance of our machine learning applications. We are looking for an energetic team member with a desire to explore, innovate and drive industr

Director of Machine Learning (Remote). Director of Machine Learning (Remote). They are seeking a Director of Machine Learning to lead the development and scaling of their ML platform, ensuring successful deployment of models and fostering a high-performing team.

Staff Machine Learning Engineer. We’re looking for a Staff Machine Learning Engineer to lead the development of these foundational AI systems within the Unity engine, empowering creators to build smarter, more responsive in-game agents and simulations. Computer Science, Machine Learning, or a rela

Staff Machine Learning Engineer page is loaded. Staff Machine Learning Engineer. We are seeking a Staff Machine Learning Engineer to join our dynamic team specializing in a technology marketplace platform for engineering talent and delivering cutting-edge Generative AI (GenAI) managed solutions for

Job Description If you meet the minimum qualifications for this role, you could be scheduled for an interview in real time! Text "SCT" to (423) 460-8460 to apply with our recruiting assistant. All jobs at Southern Champion Tray (SCT) require Team members to act in accordance with the shared Core Values and Operating principles of the company as they perform specific job functions. These include: • Trustworthy – We strive for our actions to match our words in all our relationships., • Servant – Hearted – We enable and empower our team to serve the needs of customers, Team members, suppliers and the community., • Relational – We aim to build healthy relationships while fostering and environment that promotes compassion, balance, and personal and professional growth., • Feeding consists of removing blanks from a pallet, checking for quality of product, and placing them into the feed hopper of the gluer machine maintaining the hopper at proper load heights, • It will be the responsibility of the feeder to observe the blanks flowing through the machine and watch for quality and jam-ups, and to alert the Operator of problems or stop the machine, • The feeder will notify the Operator before a new pallet of blanks is needed maintaining adequate blanks into the hopper to ensure there is no interruption in run speeds, • Packing can consist of one or two persons depending on the product and run speed of the carton produced, • A packer will fill a corrugated case with the proper case count by picking up the blanks and placing them uniformly into the case ensuring proper fit, and notifying the Supervisor of any issues, • Maintain quality standards by learning defective characteristic for products, sorting defective parts, and communicating with Machine Operator, Supervisor, and Quality Control staff, • Participate in teamwork: work with others to improve operations, reduce waste, maintain lean manufacturing goals and requirements, answer questions, and communicate with other staff as needed, • Cross train by rotating to different machines and work areas, • Pack cartons according to work order instructions by verifying counts, weighing cartons, and following job ticket and labeling instructions, • Adjust to and follow new procedures and innovations, which would add to the efficiency and safety of the operation, • In accordance with our 5S system, maintain a clean work environment including the machine, floors, desks, and fans, • Effectively utilize any machine downtime (not including approved breaks) by performing other tasks associated with maintaining a clean work environment or as otherwise instructed by a supervisor AUTHORITY: Must have the ability to lead others that has been placed with them to execute the demands of the operation efficiently and to respond to oral instructions from the supervisor and other written instructions. QUALIFICATIONS: EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Must have basic computer skills and possess ability to utilize software. LANGUAGE SKILLS: Must have the ability to read and understand documents, letters, etc. and write legibly in English. Must be able to understand and speak clearly, communicate, and understand directions in English as needed. 3rd Shift (5 Day/8 Hour) - 11:00 PM to 7:00 AM CT Mansfield Plant - 949 South Sixth Avenue, Mansfield, TX 76063