Osha jobs in Richmond, VirginiaCrear alertas

We’re unique. You should be, too. We’re changing lives every day. For both our patients and our team members. Are you innovative and entrepreneurial minded? Is your work ethic and ambition off the charts? Do you inspire others with your kindness and joy? We’re different than most primary care providers. We’re rapidly expanding and we need great people to join our team. The Care Promoter 1 is an unlicensed medical professional cross-trained to perform routine administrative and clinical tasks to keep the medical centers running smoothly. The duties of Care Promoter 1 vary from setting to setting, depending on the size, location and type. In addition to administrative duties, Care Promoters perform clinical duties under direct physician supervision in accordance with state practice acts. The Care Promoter 1 is an integral member of a Physician-led Care Team that is focused on providing excellent and comprehensive primary care for a specific population of patients. ESSENTIAL JOB DUTIES/RESPONSIBILITIES: • Measures and records vital signs; records patient interview, history, and chief complaint., • Prepares patients for examinations and performs routine screening tests; assists physician with exams; explain treatment procedures and physicians' instructions to patient., • Phlebotomy and collection of other lab specimens; performs basic waived lab tests., • Prepares and administers medications under physician supervision; changes dressings, applies bandages, removes sutures and other first aid procedures; uses CPR skills when necessary., • Maintains supplies, equipment, stocks and sterilizes instruments; practices OSHA safety standards; performs accurate, legal, and ethical documentation at all times., • Processes patient phone messages, returning calls and routing them to other team members as appropriate; calls patients to obtain and relay pertinent information for the physician., • Upon physician approval and authorization, calls in prescriptions to the pharmacy. Uses communication skills with appropriate medical terminology; and follows appropriate legal and ethical professional conduct; authorized individuals will use the ChenMed Rx system to support physician medication dispensing., • This position requires 5-10% travel time., • Performs other related duties as assigned. KNOWLEDGE, SKILLS & ABILITIES: • Must have excellent oral and written communication skills and empathy towards our patients at all times., • Ability to effectively collaborate with team members, including doctors, nurses, front desk staff, center managers, and market leaders., • Mindset focused on solving problems for patients and achieving team goals. Knowledge of medical products, services, standards, policies and procedures., • Skill in operating phones, personal computer, software and other IT systems. Must be detail-oriented to ensure accuracy of reports and data., • Ability to maintain effective and organized systems to ensure timely patient flow. Ability to act calmly in busy or stressful situations., • High school diploma or equivalent education (GED) required, • Graduation from a nationally accredited Program in one of the following is required: Medical Assistant, Patient Care Technician Program, Emergency Medical Technician (EMT) or Paramedic, • A minimum of 1 year of work experience as a Medical Assistant, Patient Care Technician, EMT or Paramedic required, • BLS for Healthcare Providers required, • Experience working with geriatric patients is a plus EMPLOYEE BENEFITS We’re ChenMed and we’re transforming healthcare for seniors and changing America’s healthcare for the better. Family-owned and physician-led, our unique approach allows us to improve the health and well-being of the populations we serve. We’re growing rapidly as we seek to rescue more and more seniors from inadequate health care. ChenMed is changing lives for the people we serve and the people we hire. With great compensation, comprehensive benefits, career development and advancement opportunities and so much more, our employees enjoy great work-life balance and opportunities to grow. Join our team who make a difference in people’s lives every single day. Current Employee apply ___ Current Contingent Worker please see job aid ___ to apply #LI-Onsite

Job Description The Technician is a heavy equipment mechanic that specializes in maintaining and repairing cranes. This position may perform routine maintenance, like lubricating parts, as well as fixing other problems when the crane malfunction. The Technician position work in a safety-first type of environment. HCSG is a 24/7 service company that requires technicians to be available on-call and provide after hour or even weekend services as required due to customer needs. DUTIES & RESPONSIBILITIES • Must be able to be on-call and provide after hour services as required., • Troubleshooting, repairing, inspecting, and upgrading industrial hoists and cranes in the field at customer locations., • Perform OSHA required hoist and crane inspections and generating inspection reports and repair orders., • Communicate with the Service Manager and Branch Manager during the day so that work can be scheduled and completed on a daily basis., • Operate tools, equipment, and vehicles in a safe and responsible manner. Notify immediate supervisor of any deficiencies., • Maintain the ability to work with others in team environment., • Attend company provided trainings and seminars as required., • Participate in HCSG 5 Marks program, • Other duties as assigned PHYSICAL DEMANDS The work is labor intensive. Must be able to lift up to 50lbs on a daily basis. Must be able to lift up to 100lbs on a rare basis. This position requires 90% of frequent climbing, balancing, stooping/crouching, overhead reaching, bending, squatting and prolonged standing and sitting. It requires occasional pushing, pulling, kneeling, and crawling. The position also involves great hand and eye coordination. Heights exceeding over 50 feet from time to time are normal to incur on a daily basis to maintain a crane. Employee will be required to travel from time to time (20 50%) and must be willing to work various shifts to accommodate needs of HCSG branches and customers. This includes on-call and overtime. Travel out of town may be required at the discretion of the company. WORK ENVIRONMENT Work is normally performed inside or outside (pending customer requirements) with varying degrees of extreme hot and cold temperatures depending on the weather. During summer months, temperatures can exceed 120 degrees. This position will be frequently exposed to noise, heights, fumes, dust, and odors. MINIMUM QUALIFICATIONS • 0 - 2 years of crane experience in an industrial facility, • Must have a valid drivers license and acceptable driving record, • Must always commit to working and driving safely, • Must be willing to work off the ground at various heights, • Must have basic computer skills, • Must be able to communicate well with others and work independently or as a team PREFERRED QUALIFICATIONS • Vocational/Technical training certificate, • Some electrical and mechanical knowledge, • Knowledge of hand tools and/or possess hand tools Must be able to pass a pre-employment drug test and background (DISA) and submit to random and annual drug testing as required.

* Build a well-trained and motivated team that produces high-quality food while adhering to safety, sanitation, and service principles * Provide leadership that supports a team environment that fosters morale, passion, quality, and respect * Be open-minded and ready to learn from your manager and team members alike * Develop creative menus that are in sync with current market trends * Demonstrate continuous ability to maintain and/or improve customer and patient satisfaction * Support team member recruiting, training, development, scheduling, and assignments * Execute, maintain, and monitor quality control systems to protect food integrity * Drive compliance with health, safety, and industry regulatory agencies Skills * Kitchen Skills: Knife skills, cutting techniques, recipe preparation, live-action cooking * Interpersonal Skills: Ability to interact with individuals at all levels of the organization * Communication: Effective written, spoken, and non-verbal communication as well as presentation skills * Customer Service: Service-oriented mentality with a focus on exceeding expectations * Professionalism: Maintain a positive and professional demeanor * Proactivity: Self-motivated with the ability to effectively prioritize projects and needs * Team Player: Willingness to collaborate and provide support where needed to achieve outcomes * Business Ethics: Demonstrate integrity, respect, and discretion in all business dealings * Organization: Attention to detail and ability to effectively manage tasks in a fast-paced environment Requirements * A cook’s certificate or associate’s degree from an accredited culinary program, or 5+ years of experience as a sous chef or kitchen manager * Computer skills including word processing, spreadsheets, email, and ordering platforms * A passion for food, a desire to grow, and a work ethic that supports both * Must be willing to relocate for promotion opportunities Not Required But a Big Plus * Proficiency in languages other than English, especially Spanish * Familiarity with OSHA, The Joint Commission, and other regulatory requirements What We Offer * Paid time off (vacation and sick) * Medical, dental, and vision insurance * 401(k) with employer match * Employee Assistance Program (EAP) * Career development and ongoing training - executive chef opportunities Important to Know * Many healthcare facilities require employees to be fully vaccinated against COVID-19 or have an approved exemption in place. * Veterans and candidates with military experience are encouraged to apply. * HHS is an Equal Employment Opportunity Employer committed to workplace diversity and inclusion. Who is HHS HHS is a private, family-owned business dedicated to caring for its team members and providing honest, quality-driven customer service. Founded in 1975 as Hospital Housekeeping Systems, today HHS provides services including housekeeping, food, and facility management to nearly 1,000 customers across six industries. We are growing rapidly and seeking motivated leaders to join us for the next stage of our journey. We support and encourage growth from within and believe that we have countless future leaders in our organization who are waiting for their next opportunity. Our Diversity, Equity, and Inclusion (DEI) Team supports a work environment where individuals of all backgrounds are heard, respected, and encouraged to grow. App-CNS

Job Description Logistics Support Technician (LST) – (Full-Time) POSITION TITLE: Full-Time Logistics Support Technician (LST) REPORTS TO: Manager of Logistics and Production DEPARTMENT: Logistics and Production POSITION SUMMARY The Logistics Support Technician is a full-time member of the logistics team responsible for ensuring ambulance and equipment readiness, cleanliness, inventory support, and vehicle movement under the supervision of the Logistics Lieutenant. This position plays a critical role in supporting field operations through systematic decontamination, restocking, and deployment of response vehicles. Technicians are expected to follow all agency safety, infection control, and inventory protocols while maintaining a professional and mission-oriented approach. The LST also provides support during special events, surge responses, and agency activations. Technicians may interface with Fleet Services or Communications for vehicle staging, logistical coordination, or operational support. The position may also serve as a pathway for advancement within RAA’s logistics or EMS operations tracks. POSITION DUTIES AND RESPONSIBILITIES System Support & Readiness • Clean, disinfect, and restock ambulances and EMS equipment according to protocols, • Ensure proper use of PPE and adherence to infection control standards, • Perform inspections on units for cleanliness, function, and readiness, • Move, park, and stage ambulances as directed to support operations, • Support surge inventory module deployment and preloaded vehicle operations during high incident responses, • Assist with the staging and stocking of Quick Response Vehicles (QRVs) and supervisor unitsEquipment & Inventory Management, • Restock and organize medical and operational supplies per RAA standards, • Binning of EMS supplies in accordance with agency standards for use on apparatus, • Assist with receipt, storage, and rotation of logistics inventory, • Identify and report equipment defects, malfunctions, or damage, • Assist with inventory counts, QA tracking, and Operative IQ entries as assigned, • Track expiration dates of medical supplies and ensure timely rotation or disposal, • Support equipment recall tracking or asset labeling projectsOperational Compliance & Support, • Follow agency procedures and chain of command for daily assignments, • Complete required checklists, logs, and documentation accurately and on time, • Support logistics preparation for special events, public functions, or large-scale activations, • Report unsafe conditions or hazards promptly to supervision, • Escort vendors, contractors, or inspectors as needed within the logistics workspace Minimum Qualifications: • High school diploma or GED, • At least 18 years of age, • Ability to understand and follow written and verbal instructions, • Ability to lift, move, and organize supplies and equipment, • Valid Virginia driver’s license with acceptable driving record, • Prior EMS, public safety, warehouse, or logistics experience, • Familiarity with EMS vehicle or medical supply handling, • Prior experience using Operative IQ or similar inventory software, • Prolonged periods of walking, standing, bending, and lifting, • Must lift and carry up to 50 pounds independently and 150 pounds with assistance, • Frequent physical activity required in indoor and outdoor environments, • Required to have visual acuity to operate motor vehicles and or equipment in both day and night lighting conditions., • Must pass the agency’s Human Performance Evaluation, • Must be able to wear PPE and work in potentially biohazardous settings CONDITIONS OF EMPLOYMENT • Must maintain eligibility to drive agency vehicles under RAA policy, • Must participate in ongoing safety and infection control training, • Subject to pre-employment and random drug screening, fingerprint-based background check, and physical ability test

Job Description Senior Inspector Alpha Corporation established in 1979, is a full-service woman-owned firm, providing civil, structural engineering, program and construction management, project controls, and technology services for various building types, transportation, and heavy infrastructure projects. We provide services to a broad spectrum of clients, including all levels of government agencies, public and private enterprises/partnerships. Alpha Corporation’s vision is to be recognized by clients for responsive, innovative, and quality services in the building, transportation, and infrastructure sectors, and to be the employer of choice for professionals seeking stimulating and rewarding careers. We are currently hiring a Senior Inspector for the Richmond. Responsibilities: The Senior Inspector will be responsible for ensuring contractors' compliance through reviewing interpreting and enforcing plans and contract documents for efficient and timely inspection of the contractor’s work, and shall: • Independently plan, coordinate, inspect, and oversee project inspection activities of roadway, structure, and bridge, maintenance projects., • Monitor contractors and schedules to ensure quality control and contract compliance of moderate to complex construction projects and advise contractors of violations and recommend adjustments to operations., • Apply knowledge and experience toward the inspection of roadways and bridges using VDOT standards, specifications, and procedures., • Apply engineering principles in the inspection and documentation of construction activities and make field measurements of pay items., • Recommend changes to construction plans to meet field conditions or provide cost savings., • Review and monitor EEO/DBE documentation and compliance with contract documents., • Oversee, direct, and review the work of Inspectors and Inspector Trainees, • Maintain comprehensive project records and documentation using the VDOT Materials Book & project management software which could include VDOT Site Manager/AWP/Etc., • Complete testing of materials using VDOT testing procedures, • Apply Best Management Practices to environmental inspection activities using DEQ standards and specifications., • Apply Best Management Practices to safety activities., • Communicate with various stakeholders including Localities and VDOT The Senior Inspector qualifications for this role include: • 7 years of experience in roadway or bridge construction inspection, • Must be current with the following certifications or the ability to obtain:, • ACI, • Hydraulic Cement Concrete Field - ACI, • Soils and Aggregate - VDOT, • ESC Inspector - DEQ, • SWM Inspector - DEQ, • Pavement Marking - VDOT, • Intermediate Work Zone - VDOT, • Flagger - VDOT, • Guardrail Installation (GRIT) - VDOT, • Asphalt Field Levels I and II - VDOT, • Slurry Surfacing - VDOT, • Surface Treatment - VDOT, • 10-hour OSHA Safety, • High school diploma or GED, • Experience operating computer equipment, software programs including Microsoft Office Suite, and field-testing equipment., • Must be able and willing to workday and night shifts., • Must have a valid driver’s license and an acceptable driving record. Alpha Corporation is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

About: Labcorp is a leading provider of biometric testing services, population health and comprehensive workforce wellness strategies. These services are performed by a network of Labcorp personnel located throughout the country. Summary: Labcorp is seeking medical professionals to provide testing services at events. Once hired, our staff have the ability to assign themselves to events in their area by utilizing our scheduling system. In addition, we provide pre-event comprehensive training on LES protocols. Testing services include biometric screenings, COVID-19 PCR testing, COVID-19 point of care antigen testing, and temperature checks. Our staff are responsible for the successful setup, execution, and breakdown of events while providing exceptional customer service to participants. Key Responsibilities: • Review and explain participants’ screening results (height, weight, BMI, body fat percentage, waist measurement, blood pressure, total cholesterol, HDL, LDL, triglycerides, and glucose)., • Proficiency in providing brief interventions aimed to help participants to understand what actionable behaviors can influence their health in an appropriate way, • Provide appropriate health recommendations to participants as needed, • Keep records of interactions with screening participants as directed by Labcorp Program Manager, • Knowledge of HIPAA and OSHA Minimum Qualifications: • MUST be a Certified Registered Dietitian with experience in health psychology and motivational interviewing, • MUST be able to pass a Background Check and Drug Test, • MUST be 18 years of age or older, • Ability to communicate effectively with participants of various cultures and backgrounds, • Ability to adhere to accepted medical guidelines/practices when providing health education Physical Requirements: Must be able to lift to 15 pounds at times. Application Window: 5/05/2025 Pay Range: $45-$50 All job offers will be based on a candidate’s skills and prior relevant experience, applicable degrees/certifications, as well as internal equity and market data. Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. For more detailed information, please click here. Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement.

Job DescriptionCompany Description DCSAM is a family owned and operated business with treating all employees like family at the core of our values. Our employees provide innovative, safe, and high-quality infrastructure/maintenance contracting services to State DOTs, railroads, and other commercial/residential customers across the entire United States. Employees receive generous compensation packages, employee engagement events & career development programs, just to name a few of the perks of being part of the DCSAM family! To provide quality service, we need top-of-the-line employees. That is why we offer great compensation, awesome benefits, and a work environment worth bragging about! Job Description DCS Asset Maintenance (DCSAM) is looking for reliable CDL Drivers to help keep Virginia roads clear and safe during winter weather. This position is on an on-call basis and will only be needed during periods of inclement winter weather What You’ll Do: • Operate snowplow trucks safely and responsibly during winter storms., • Follow all DOT, OSHA, and company safety rules., • Do pre- and post-trip vehicle inspections and report any issues right away., • Communicate with your Route Manager or Dispatch about any unsafe situations or service needs., • Take part in required safety meetings and training sessions., • Help other drivers or routes when needed.Qualifications EDUCATION: High School Diploma or Equivalent is required. EXPERIENCE: • Must be 18 or older., • Have a valid Class A or B CDL., • Pass a DOT drug screen, and MVR review., • Have a clean driving record — no serious violations or multiple accidents within the past 5 years., • Be willing to travel to snow locations and stay for the duration of the event (hotel, travel time, and per diem paid by DCS)., • Prior snowplow experience is helpful but not required., • Must attend an 8-hour in-person snow training before the season starts., • Work is needed, depending on winter weather events determined by VDOT. Additional Information • $35/hour pay rate, • Overtime opportunities available during extended snow events/travel., • Paid travel time, hotel, and per diem for out-of-town work DCSAM is an equal opportunity employer and complies with all hiring and employment regulations. In the event an ADA accommodation is needed, DCSAM is happy to help all employees achieve gainful employment in an atmosphere where they are appreciated and respected. DCSAM offers subcontracting services to government agencies as such, candidates may be subject to pre-employment screenings such as criminal background checks, pre-employment, post-accident & reasonable impairment drug screenings, motor vehicle record checks, etc. as such, DCSAM complies with all federal and state regulatory guidelines including the FCRA.

Job DescriptionDescription: General Description: The Delivery Driver will work with other members of the service team to increase company profitability and client satisfaction by delivering complete, accurate and on-time deliveries to customers. The driver will represent the company in a highly professional, safe and cost-effective manner that complies with DOT and other applicable regulations. Responsibilities: Safety • Identifying unsafe actions and conditions on a regular basis, • Report all non-injuries (Accident No Injury - ANI) and injuries, • Participate in weekly departmental Safety Inspections, • Prepare truck for operation by the loading of trucks, securing of items and verifying the accuracy of shipping papers, • Inspect truck tires, lights, brakes, fluids, etc. to ensure safe and cost-effective performance with preventive maintenance in mind, • Deliver orders via the most effective route to ensure complete orders are delivered according to established time frames and clients’ needs, • Maintain communication with company during deliveries to ensure any updated instructions are received, • Document delivery, accuracy and receipt of orders to the client according to company directives and report any discrepancies to company, • Increase customer satisfaction by collecting information, feedback on service and resolving complaints per company policy; communicate information back to company, • Inform clients of new products and services that can increase customer satisfaction and sales, • Maintain and monitor truck maintenance and driving record requirements, and maintain required documents for safety, security and quality processes, • Safely operate mobile equipment and other warehouse equipment as required, • Perform occasional warehouse and counter duties, • Maintain proficiency in computerized systems and other technologies as required, • Follow company policies and procedures A review of this position has excluded the marginal functions of the position that are incidental to the performance of the fundamental job duties. All duties and responsibilities listed are subject to possible modification at any time deemed necessary by upper management. To perform this job successfully the incumbent(s) will possess the skills, aptitudes, and the abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills and abilities needed to perform the job on a daily basis in a competent manner. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. Requirements: Experience Requirements: • Construction equipment hauling experience preferred, • Delivers superior customer service and conveys a professional demeanor, • Able to read a map and accurately plan a route, • Accuracy and attention to detail, • Able to handle difficult customers with diplomacy and tact, • Capable of following written instructions and documented procedures, • Recognizes and understands product numbers and alphanumeric codes, • Working knowledge of Department of Transportation (DOT) rules and regulations, • Effective listening, verbal and written communication skills, • Operates forklifts in compliance with OSHA requirements, • Lift/carry/maneuver heavy material or equipment, up to 50lbs, • Pass a drug screen, background check and fitness for duty physical, • Valid CDL driver’s license and clean driving record, • High school diploma/GED preferred, • Minimum 2 years in similar position preferred

Job Description JOB SUMMARY: The Vacuum Truck Operator must be able to work in compliance in the delivery of MER’s four core service lines (Emergency Response, Industrial and Marine Services, Facility Decontamination, and Site Remediation). Drivers must adhere to and maintain strict compliance with corporate/office policies and procedures, established health and safety protocols, and all applicable local, state, and federal regulations. JOB RESPONSIBILITIES: • Execution of field work encompassed in remediation and industrial maintenance projects while under direct or indirect supervision., • Drive an average of 30% of the time as well as work onsite as part of a team. Depending on location, drivers may be asked to perform the duties of a Field Technician if business needs warrant it., • Correct completion of all job-specific, employee-related and equipment-related MER paper work including Timesheets, Daily Work Reports, Driver’s Logs, Pre and Post Vehicle Inspection and Daily Tailgate Safety Meeting Forms., • Understand and enforce project’s detailed scope-of-work to maintain strict compliance with contract documents, project schedules, and corporate policies and procedures., • Work safely during all phases of performing the job duties required in the field., • Ability to perform work inside areas of varying dimensions, involving squatting and crawling for possible extended periods., • Ability to follow directions; read/speak and understand English; read and understand common danger placards / labels and hazardous warning literature including site safety plans., • The ability to safely drive and perform safety checks on all vehicles for which licensed., • Operate various vehicles safely, including but not limited to Vacuum Truck, Vacuum Trailer, Turbo-Vac, Roll-Off Truck and Hydro Vac., • Project work may require out of town travel for two weeks or more, • Must be able to understand and comply with company and client safety standards., • Due to the diversity of both scheduled and non-scheduled projects, physical demands, and environmental conditions vary significantly depending on the project., • Work outside year-round in all types of weather., • May work in environments that are extreme in nature like environmental conditions such as heat, cold, heights, hazardous chemicals, loud noises, dangerous equipment, long hours etc., • May be exposed to varying levels of physical activities and physical extremes such as long periods of standing, walking, crouching, use of hands, and heavy lifting of up to 50 pounds or more., • Must be clean shaven at all times to allow immediate donning and seal of respirator. QUALIFICATIONS: • Must be able to effectively operate a manual transmission., • Requires High School Diploma or GED (or equivalent reading, writing and reasoning skills) and 2-3 years of experience operating vacuum trucks (or similar equipment)., • Additional experience in related work (emergency response, manual labor, general construction, industrial cleaning) is preferred., • A valid Class “B” or “A” Commercial Driver’s License with Hazmat and Tanker endorsements is required., • TWIC Preferred., • OSHA 40-HR HAZWOPER and Confined Space Entry certifications are required to complete within the first 30 days of employment., • Successful completion of a pre-employment background and substance screening process including, but not limited to, employment verifications, criminal search and Motor Vehicle, • Record (MVR) search as well continued verifications throughout employment to ensure that all records meet company policy standards. BENEFITS: • Competitive Salary, • Health, Dental, and Vision Insurance, • 401k with Company Match, • Paid Time Off (PTO), • Paid Holidays MER is committed to providing equal employment opportunities in a drug free work environment to all employees and applicants without regard to race, religion, color, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, uniform service member status, marital status, pregnancy, age, protected medical condition, genetic information, disability or any other protected status in accordance with all applicable federal, state and local laws. Moran Environmental Recovery is an Equal Opportunity Employer.

Job Description SIGN ON BONUS General Description: Responsible for safely and efficiently operating a vacuum truck and dump truck as needed. Key Duties: • A valid CDL class A or B with good driving record is required, • Ability to operate equipment safely and efficiently, • Tanker Endorsement is a plus, • Demonstrates safety 1st, • Identifies and turns in near miss reports, • Speaks up when sees unsafe act, • Nighttime and weekend hours are possible To perform this job successfully, an individual must be able to perform each Key Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to effectively operate a manual transmission., • Requires High School Diploma or GED (or equivalent reading, writing and reasoning skills) and 2-3 years of experience operating vacuum trucks (or similar equipment)., • Additional experience in related work (emergency response, manual labor, general construction, industrial cleaning) is preferred., • A valid Class “B” or “A” Commercial Driver’s License (CDL) with Hazmat and Tanker endorsements is required. • OSHA 40-HR is desired but not required., • Successful completion of a pre-employment background and substance screening process including, but not limited to, employment verifications, criminal search and Motor Vehicle Record (MVR) search as well continued verifications throughout employment to ensure that all records meet company policy standards. The following physical demands are representative of those that must be met by a Vacuum Truck Driver to successfully perform the essential functions of this job. • Constant physical effort, including standing, is required during a regular work shift of at least eight hours per day. Employee must be able to stand for extended periods of time, and to stoop, bend, and crouch as required to perform Key Duties, • Frequently work with hands extended overhead, sometimes in conjunction with the operation of hand power tools., • Ability to lift at least 50 pounds individually and up to 90 pounds with assistance., • Manual dexterity to hand-carry generators, lumber and other construction materials, forms, power tools, and hand tools., • Maintain constant alertness to the multiple concurrent activities of the construction site, including the activities of other employees and contractors, the operation of stationary equipment, and the movement of mobile equipment., • Frequently walk on uneven surfaces, including natural ground in varying weather conditions., • Capable of safely and productively operating a man-lift., • The Operator must be able to climb on and off heavy mobile equipment safely. Work Environment: The work environment characteristics described below are representative of those that a Vacuum Truck Driver encounters while performing the essential functions of this job. • Work is performed outdoors in all weather conditions., • Work environment periodically exposes the employees to high levels of noise, grease, and dust that is typically associated with a construction project., • Employee regularly works near heavy equipment and moving machinery., • Work may involve a variety of substances commonly found on construction sites or equipment shop such as form oil, grease, curing compounds, gasoline, diesel fuel and asphalt. Powered by JazzHR t37C64o7Ad

Job Description Rite Rug has been one of the top privately owned flooring companies, since 1934! We are looking for a motivated, reliable, Assistant Warehouse Manager to join our team! If you are looking for a company where you are part of a family, then Rite Rug is the place for you! Monday thru Friday 7am to 4pm! ESSENTIAL FUNCTIONS: • Assists Warehouse Manager with Maintaining receiving, warehousing, and distribution operations by initiating, coordinating, and enforcing program, operational, and personnel policies and procedures, • Motivate warehouse team to meet or exceed goals and standards, • Communicate effectively via phone and e-mail, • Insure all warehouse team members are following all safety standards, • Learn RFMS software for inventory and bin management, • Accurately pulls, fills, packs and sets up orders for delivery or pickup, • Assist with loading and unloading product by hand or with forklifts, • Operates forklift safely and efficiently, follow all OSHA safety regulations and perform vehicle safety checks, • Insure the warehouse stays safe, clean, clutter-free and operating efficiently, • At least two years’ experience working in a warehouse or distribution, • At least one year operating a fork lift, • Able to lift up to 50 pounds and move heavy objects, • At least 18 years old with a high school diploma or GED, • Strong customer service attitude, • Rite Rug is a Drug-Free Workplace – Random drug testing – Zero tolerance policy, • Able to follow and carry out instructions with minimal supervision#ZR Company DescriptionTrusted Name in Flooring Since 1934! From a modest store on the corner of Cherry and High Streets in Downtown Columbus, Ohio, Rite Rug Flooring has expanded to become one of the largest flooring retailers in the United States. With three different divisions in 18 states, we are able to service all types of customer. Over 90 years we are still a family-owned business operating by the same values on which we were founded — offering the best products at competitive prices, with a staff of friendly, knowledgeable experts.Trusted Name in Flooring Since 1934!\r\n\r\nFrom a modest store on the corner of Cherry and High Streets in Downtown Columbus, Ohio, Rite Rug Flooring has expanded to become one of the largest flooring retailers in the United States. With three different divisions in 18 states, we are able to service all types of customer. \r\n\r\nOver 90 years we are still a family-owned business operating by the same values on which we were founded — offering the best products at competitive prices, with a staff of friendly, knowledgeable experts.

Job Description Position Summary The Warehouse Store Manager is responsible for overseeing daily warehouse operations and retail counter sales within an HVAC distribution facility. This role ensures efficient inventory management, safe warehouse practices, superior customer service, and leadership of warehouse staff. The manager will work the sales counter daily in addition coordinating logistics and customer pickup’s. The manager will drive operational excellence, and maintain a clean, organized, and productive work environment. Key Responsibilities · Operations Management o Oversee daily warehouse activities including receiving, stocking, picking, packing, and shipping HVAC products. o Ensure compliance with company policies, OSHA safety standards, and industry best practices. o Maintain accurate inventory records and conduct regular cycle counts. o Coordinate logistics with vendors, carriers, and internal departments. Sales & Customer Service o Manage the store counter, ensuring prompt, knowledgeable, and professional service to HVAC contractors and customers. o Support sales by processing orders, sourcing parts, and recommending product solutions. o Promote upselling and add-on products to drive store sales. Team Leadership o Supervise, train, and schedule warehouse associates. o Set performance expectations and conduct regular evaluations. o Foster a team culture centered on safety, accountability, and customer satisfaction Qualifications · 3–5 years of warehouse, distribution, or retail management experience (HVAC or related industry preferred). · Strong knowledge of HVAC products, parts, and distribution operations is a plus. · Proven ability to lead and motivate teams in a fast-paced environment. · Excellent organizational, problem-solving, and communication skills. · Proficiency in ERP systems, and Microsoft Office. · Ability to lift up to 50 lbs. and work in a warehouse/retail environment. Key Competencies · Leadership & People Management · Customer Service Orientation · Inventory & Logistics Control · Sales-Driven Mindset · Safety & Compliance Awareness

Job Description Join Ukrop's Homestyle Foods as an Industrial Maintenance Mechanic and help keep our production operations running smoothly! In this role, you'll perform daily maintenance, troubleshooting, and repairs on essential equipment and facility systems. From electrical and plumbing work to HVAC and mechanical repairs, you'll play a key role in supporting production efficiency and food safety. If you're skilled with your hands, enjoy solving problems, and want to be part of a collaborative and growing team, we'd love to hear from you. Ukrop's Homestyle Foods: What Drives Us We are a family-founded company with deep roots in the Richmond community. We value teammates who are Honest, Safe, Helpful, and Ingenuitive. We are committed to creating a workplace culture that reflects those values every day. What It's Like to Be an Industrial Maintenance Mechanic As an Industrial Maintenance Mechanic at Ukrop's Homestyle Foods, you'll work hands-on with production equipment and building systems to keep our facilities operating at peak performance. You'll troubleshoot issues, perform preventive maintenance, and partner closely with production teams to meet manufacturing goals. Every day brings a variety of tasks, and your role directly impacts product quality, food safety, and operational success. Essential Duties and Responsibilities • Perform general repairs, including plumbing, electrical, HVAC, drywall, painting, and door repairs., • Install and repair plant production and support equipment quickly and efficiently., • Read blueprints and building plans to troubleshoot and resolve issues., • Oil and lubricate moving parts on machines to ensure performance., • Inspect, troubleshoot, and prioritize maintenance tasks on equipment and systems., • Record and report damaged, worn, or broken parts and document completed work., • Conduct preventive maintenance on plumbing, electrical, and HVAC systems., • Clean, organize, inventory, and stock shop areas, parts, tools, and supplies., • Follow lockout/tagout procedures to ensure equipment safety., • Maintain equipment, fire, and electrical safety during plant walkthroughs., • Serve as one of the plant's First Responders for emergency situations., • Support food safety by following HACCP, GMPs, SSOPs, SQF, and other safety guidelines., • High school diploma or GED required., • Minimum 2 years of vocational training, apprenticeship, or relevant experience required., • Must be 18 years or older., • Valid driver's license that meets company requirements., • Diagnose and resolve issues efficiently in a fast-paced environment., • Build positive relationships and work collaboratively with teammates and leadership., • Dependable and committed to supporting production needs., • Take ownership of tasks and complete them accurately and on time., • Ability to read schematics, blueprints, and equipment manuals., • Primarily performed in a production and maintenance shop environment., • Exposure to cold and refrigerated areas and occasional work inside freezers., • Frequent standing, bending, twisting, climbing, pushing, pulling, and lifting up to 75 lbs., • Use of commercial tools, machines, and safety equipment required., • Affordable healthcare upon eligibility, • Company-sponsored life insurance, • Short-term and long-term disability, • 401(k) plan upon eligibility, • Paid Time Off (PTO), • Birthday PTO, • Referral bonuses, • Shift differential on eligible shifts, • Competitive pay, • and more Ukrop's Homestyle Foods is an Equal Opportunity Employer

Job Description About the Role: The Industrial Maintenance Technician on the 1st shift plays a critical role in ensuring the continuous and efficient operation of manufacturing equipment within a durable goods production environment. This position focuses on performing preventive maintenance, troubleshooting, and repairing mechanical, electrical, and hydraulic systems to minimize downtime and maintain production schedules. The technician will collaborate closely with production teams to identify potential issues before they escalate, thereby supporting overall plant safety and productivity. Additionally, the role requires maintaining accurate maintenance records and adhering to safety and quality standards. Ultimately, the technician’s expertise directly contributes to the reliability and longevity of manufacturing equipment, supporting the company’s commitment to delivering high-quality products on time. Minimum Qualifications: • Minimum of 3 years of experience in industrial maintenance or a related technical field., • Proficiency in reading and interpreting electrical and mechanical schematics., • Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems., • Technical experience in industrial maintenance, electrical technology, or a related discipline., • Experience working in a durable goods manufacturing environment., • Familiarity with computerized maintenance management systems (CMMS)., • Basic welding and fabrication skills., • Perform routine preventive maintenance on manufacturing equipment to ensure optimal performance and reduce unexpected breakdowns., • Diagnose and repair mechanical, electrical, pneumatic, and hydraulic system failures promptly to minimize production interruptions., • Collaborate with production and engineering teams to identify equipment issues and implement effective solutions., • Maintain detailed maintenance logs, service reports, and parts inventory to support operational transparency and compliance. The required skills enable the technician to effectively diagnose and repair complex equipment issues, ensuring minimal disruption to production. Mechanical and electrical troubleshooting skills are applied daily to maintain and restore machinery functionality. The ability to read schematics and technical manuals supports accurate repairs and preventive maintenance planning. Preferred skills such as familiarity with CMMS enhance the technician’s efficiency in tracking maintenance activities and managing work orders. Additionally, strong communication and teamwork skills facilitate collaboration with production and engineering personnel to optimize equipment performance and safety. Our goal is to be a diverse workforce that is representative, at all job levels, of the citizens and customers we serve. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. Hood Container Corporation is a family-owned, Mill to Market company, specializing in containerboard and kraft paper, corrugated boxes, high graphic displays, and contract packaging. Our commitment to customer happiness, employee well-being, environmental stewardship, and operational excellence drive our business. Over the last decade, Hood Container Corporation has grown to become one of the top ten Paper and Packaging Companies in the United States. To learn more about Hood Container Corporation visit or check us out on social media! INDMP

Job DescriptionRange Commercial Partners, Inc. is hiring a Maintenance Technician in Richmond, VA! Range Commercial Partners was founded by seasoned experts in sales, leasing, property management, and development, who united around common goals and principles. Independently owned, we operate with open minds, no geographic constraints, and unwavering commitment to success for our clients and our firm. Driven, generous, and mindful of balance, we’re forming teams that are built to make a difference! What you will be doing: • Inspect building systems including fire alarms, HVAC, electrical, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client at assigned properties., • Performs day to day repairs, emergency maintenance, and preventive maintenance on all assigned properties or accounts including daily housekeeping chores., • Assists with troubleshooting and repairs of buildings and installed systems to include: plumbing systems, kitchen equipment, roofs, drains, shop, and HVAC., • Receives and completes work orders for corrective repair work on a variety of building physical structures, equipment, and system components in a timely manner as assigned., • Oversees and inspects the work performed by outside contractors., • Maintains lighting systems throughout the facility, cleaning fixtures and replacing bulbs and lamps., • Orders necessary materials in order to complete all required repairs, within limits set by the Property Manager., • Completes all required paperwork within established deadlines to close out work orders., • Maintains and renews any required trade certifications and licenses., • Periodically, meets with the assigned Property Manager to ensure that all aspects of required or requested maintenance work are achieving the goals and objectives established to maintain the property., • Ensures that requests for work that exceed routine day to day repairs or maintenance, is properly referred and routed to the Chief Engineer for review., • Is responsible for 24/7 vehicle readiness as a part of the maintenance position., • Promptly reports unusual events or conditions discovered on assigned properties to the Property Manager and the Maintenance Supervisor., • Performs work in accordance with all Federal and State OSHA guidelines and requirements., • Physical requirements include stooping, standing, walking, climbing stairs/ ladders, and ability to lift/carry heavy loads of 50 lbs. or more.What you will bring along:, • High school education., • Advanced knowledge of plumbing, electrical, mechanical, roofing, drywall, carpentry, and HVAC troubleshooting., • Excellent written and verbal communication skills., • Strong organizational and analytical skills., • Ability to provide efficient, timely, reliable and courteous service to customers, with the ability to present information., • Requires knowledge of financial terms and principles to understand operating budgets., • Ability to comprehend, analyze and interpret documents., • Ability to solve problems involving several options in situations that require intermediate analytical and quantitative skills., • Uses computer and phone for work order system, email, and training. Basic skills with Microsoft Office Outlook., • Decisions made with thorough knowledge of procedures and company policies to achieve set results and deadlines. Responsible for setting own project deadlines., • Must always use professional judgement and decisions made with thorough understanding of procedures, company policies, and business practices to achieve general results and deadlines., • Ability to work in a fast-paced environment and will need to be able to adapt to shift priorities efficiently and effectively., • Excellent collaboration and written and verbal communication skills required to effectively communicate with diverse populations are essential., • Embrace the Range Commercial Partners values:, • Service, • Excellence, • Respect, • Versatility, • Integrity, • Curiosity, • EfficiencyThe Perks:, • Health coverage for you and your family through medical, dental and vision plans., • Financial protection through disability, life, and accidental death and dismemberment., • A 401(k) plan in which the company matches dollar for dollar on a generous % you contribute., • A generous paid time off program in which the benefits increase along with your tenure with the company. GHPu0HB0Qj

Job Description At ACI we build our company and our culture not by counting people, but by making our people count! $0.00 COST FOR MEDICAL, DENTAL, SHORT TERM DISABILITY & LIFE INSURANCE (EMPLOYEE ONLY) COVERAGE! Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years. Benefits: • Medical Insurance Plan ($0.00 Employee-Only), • Dental Insurance Plan ($0.00 Employee-Only), • Short-Term Disability Plan ($0.00 Employee-Only), • Life Insurance Plan ($0.00 Employee-Only), • Vision Insurance Plan, • 401(K) Retirement Plan with Generous Company Matching, • Health Savings Plan with Generous Company Matching Summary/Objective: The Shrink Wrap Technician position is fulltime/year-round position responsible for protecting modular products for long haul shipping and storage. Essential Functions: • Safety planning and adherence to all OSHA, VOSHA, and ACI safety standards. This may include but is not limited to safety meetings, taking corrective actions, and administering aid, • Forecast material needs and inventories for shrink wrapping, • Leads a group(s) for paint touch up and shrink wrapping, • Provides leadership and training for new employees, • Understands and adjusts labor to meet schedule demand, • Adheres to Quality Control processes, • Tracks production for reporting, • Conducts 5's process improvement evaluations and implementation Supervisory Responsibility: Yes Required: • 2+ years of experience shrink wrapping large projects, • Experience maintaining and operating equipment necessary for shrink wrapping various sizes of modular product for over the road shipping and outdoor storage, • Can operate construction equipment such as lifts, hand tools, and power tools, • Manages project materials and inventories needed for shrink wrapping, • Ability to speak, read, and write in English with Spanish as an addition would be a plus., • Proficient in general computer equipment and Microsoft office products, • Excellent math and geometry skills, • Possess a willingness to grow with the job and teambuilding, • Must be willing to work overtime as needed; significant overtime may be required during busy periods., • Must adhere to company policies and procedures, • Must be available to work assigned schedules and extended hours as needed, • Willing to make site visits to perform field work or make evaluations as required. The work environment and physical demands required would be representative of those that must be met by an employee to successfully perform the essential functions of this job, and may include, but are not limited to the following: Work Environment: • May work in varying temperatures; both inside and outside, including inclement weather, heat, humidity, cold, and dampness, • May work in areas with exposure to moderate/high noise levels, • May be exposed to fumes or airborne particles including dust, • This role routinely uses construction equipment such as heavy machinery, hand and power tools, • While performing duties of the job the employee may work aloft, climb, bend, pull, reach overhead, stand/walk for long periods of time and lift up to 50 lbs., • Frequently is required to use hands to finger, handle or feel objects, tools or controls; and reach with hands and arms, • Prior military experience, • Experience with Structural steel detailing using SDS/2 or (Tekla – preferred), • HS diploma or GED equivalent, • The Steel Detailer should be fluent with computer use and software navigation., • Able to use Microsoft office Visit us at for more information! Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. An Equal Opportunity/Affirmative Action Employer Shrink Wrap Technician

Job Description Overview The Maintenance Technician is responsible for physically maintaining the property including corrective and preventative maintenance measures on property equipment, fixtures, buildings and completing service requests in residences. Responsibilities The Maintenance Technician conducts all business in accordance with Gates, Hudson & Associates, Inc., established policies and procedures, state and federal laws; e.g., OSHA, ADA, Fair Housing, etc. Personnel • Provide training to other technicians as needed and/or directed., • Provide assistance to other technicians at other properties. Administrative • Provide lists of deficiencies, damage or lease violations within buildings and/or apartments., • Become familiar with property. Know location of equipment, types of equipment, major property components, contracted work, personnel, etc., • Control use of parts. Provide quality workmanship and maintain inventory of frequency used parts., • Maintain stock rooms, maintenance workshops and offices., • Comply with policy for keys, master keys, apartment common area keys., • Follow reporting procedures. Resident Service and Retention • Perform all resident requests for service promptly and efficiently., • Promote goodwill among prospects, residents, employees, contractors., • Comply with policy regarding entering occupied apartments. Preventative Maintenance • Be knowledgeable of pertinent laws and EPA and OSHA regulations governing proper storage and management of hazardous materials, including solvents, flammables, and freon., • Schedule and perform routine preventative maintenance on all appropriate equipment as directed by Maintenance Supervisor and Property Manager. Update logs as provided. Routine Maintenance • Perform turnovers in a timely and efficient manner., • Perform emergency repairs including corrective and necessary clean-up., • Change locks and makes keys., • Operate and maintain furnace, mechanical equipment and controls for continuous heat, air conditioning and hot water., • Diagnose and perform minor and routine maintenance/repair, as directed, involving the following on a daily basis:, • Electrical and plumbing (including water lines), • A/C and heating systems, • Appliances (when applicable), • Stairs, gates, fences, patios, railings, • Tile, carpet, flooring, • Roofing, gutters, fasteners, • Interior/exterior lights, • Fireplaces, ceiling fans, • Shutters, doors, cabinets, windows, sliding glass doors, • Boiler, gas and electric, • Door locks, • Security systems (where applicable), • Ceiling and wall leaks, • Dry wall, • Pools areas, tile, jacuzzi, pool furniture, • Report all major repairs and need requisitions to Maintenance Supervisor and Property Manager prior to any expenditure of funds., • Remove and transfer heavy appliances and equipment from storage area to apartment (or vise versa) as circumstances warrant., • Assist in moving abandoned furniture, appliances, etc. to Dumpster when necessary., • Be knowledgeable of inventory levels of spare parts and supplies and inform Maintenance Supervisor of shortages., • Assist in keeping grounds neat and free of litter. Rake, sweep, shovel as circumstances warrant., • Take monthly water consumption readings., • Possess and/or provide tools necessary to perform all corrective and preventative work. (Exceptions: heavy pipe wrenches, pulleys, chain-falls, drain snakes, scaffolding.), • Clean-up after repairs or at end of day. Safety • Be aware of the condition of apartment property throughout the community and immediately initiate action to correct unsafe conditions; e.g., broken gates, leading to the pool, broken steps, and open holes, broken/burned out exterior lights., • Ensure storage areas remain locked when not in use., • Promote awareness for safety and security for maintenance staff., • Provide feedback and follow-up in emergency situations. Provide written Incident/Accident Report., • Be aware of all utility meter cut-offs, apartment and fixture cut-offs, sewer clean outs.

Job Description Maintenance Technician Department: Operations Administration Reports To: Operations Manager Job Type: Full-Time | Hourly (Non-Exempt) Summary We are seeking a motivated Maintenance Technician to support operations for a premier industrial client. This position is responsible for equipment and facility maintenance and repair within assigned locations. The Maintenance Technician works in accordance with established job requirements and Safe Methods of Work and has no supervisory responsibilities. Responsibilities * Interpret work orders, diagrams, and specifications to diagnose mechanical, electrical, pneumatic, and hydraulic maintenance or repair needs * Disassemble, repair, and reassemble machinery using hand tools, hoists, jacks, or cranes * Start and monitor machines after repair to verify proper operation and identify issues * Inspect components, mark defects, and report repair needs to supervisors * Install or replace machine parts and attachments based on operational requirements * Lubricate equipment as specified to maintain optimal performance * Accurately document maintenance and repair activities * Work collaboratively to complete repairs or move machinery and equipment * Perform general facility maintenance in production, warehouse, and office areas * Safely operate and maintain all tools, equipment, and required PPE * Maintain awareness of surroundings and navigate safely around active work areas * Work in varied indoor and outdoor conditions, including extreme temperatures * Follow OSHA regulations and all company safety policies * Consistently wear required personal protective equipment * Perform other duties as assigned Qualifications & Experience * Ability to read and interpret work orders and communicate effectively in English (written and verbal) * Proficiency with hand tools and general mechanical maintenance * Electrical, welding, and plumbing experience is a plus * Ability to meet or exceed established productivity standards safely * Strong organizational and planning skills; ability to work independently or as part of a team * Ability to maintain effective interdepartmental communication related to safety and operations * Intermediate math skills (add, subtract, multiply, divide) * Five (5) or more years of industrial or mechanical maintenance experience preferred Physical Requirements The physical demands described here are representative of those required to successfully perform the essential functions of this role. Reasonable accommodations may be made for qualified individuals. * Regularly required to sit, stand, walk, reach, handle tools, and communicate * Regularly lift and/or move up to 25 pounds; occasionally up to 40 pounds * Vision requirements include close vision, distance vision, color vision, and depth perception Working Conditions * Industrial work environment with occasional exposure to moving mechanical parts, airborne particles, chemicals, and electrical hazards * Noise levels are generally moderate, with occasional higher levels * Work may occur in both indoor and outdoor settings Company DescriptionWe pride ourselves on providing competitive opportunities for skilled professionals.We pride ourselves on providing competitive opportunities for skilled professionals.

Job Description We are looking for an Overhead Crane Technician at Crane 1 to join our team this year! Position Highlights: • Recognized leader: Crane 1 is a recognized leader in the crane service industry., • Advancement: Potential for leadership opportunities., • Growth: We are growing organically at the “double digit” rate., • Vision: We will be the clear destination for technical talent and become the #1 independent, full-solution provider of overhead crane solutions and related services within the United States., • Recognition: Service Technicians are the heart of our industry., • Service Technicians are responsible for performing field maintenance, routine inspections, preventative, and complex repairs requiring strong electrical and mechanical troubleshooting background., • Perform spot checks to ensure the highest level of quality & workmanship., • Our technicians work in a safety-first type of environment and don’t mind heights or working on mechanical parts., • Working at heights & some heavy lifting., • Document findings and make consultative recommendations regarding the repair and safety-related concerns to the customer for the inspected equipment., • Provide proper checklists and required forms and with customer signatures for all inspection or service-related documentation., • KNOWLEDGE: A minimum of (2) years of manufacturing/industrial electrical./mechanical experience., • SKILLS:, • Thorough knowledge of electrical theory for power and controls., • Thorough knowledge of the mechanical systems of cranes/hoists., • Thorough knowledge of simple structural elements, • Understanding of the OSHA/ANSI standard (is required), • The position requires 8 to 12-hour shift work, which can include Saturdays and Sundays., • Ensure we maintain a professional, safe, productive, and compliant work environment. Crane 1 Services is an equal opportunity employer. We are committed to creating a diverse and inclusive workplace where all qualified applicants are considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status in accordance with applicable federal, state, and local laws. We believe in fostering a supportive environment where every employee is valued and given the opportunity to succeed. Company DescriptionIt’s All About Delivering Service Excellence Every Day. CRANE1 is a leader in crane and hoist safety solutions, equipment installations, emergency repairs, and lifecycle asset management focused on safety compliance, equipment uptime, and cost savings.It’s All About Delivering Service Excellence Every Day.\r\nCRANE1 is a leader in crane and hoist safety solutions, equipment installations, emergency repairs, and lifecycle asset management focused on safety compliance, equipment uptime, and cost savings.

Job Description Your next destination is here. Build your career at Commonwealth Lodging. OUR COMPANY CULTURE We take a proactive, hands-on approach to hotel management. Our team boasts extensive experience in all areas of hospitality management. We are a company with a culture that understands relationships and Team First! We value professionalism and integrity as we work towards providing world-class hospitality. We understand that our associates deliver our guest experience, and we are looking for the highest quality talent to achieve our mission! You'll love working for us because: The People! You will be surrounded by some of the most talented and supportive leaders and team-people you can be proud to work with! OUR COMPANY CORE VALUES Team First, Own It, Relationship Oriented, Professionalism, Integrity. Position Overview The Deep Cleaning Housekeeping Associate is responsible for maintaining a high standard of cleanliness, sanitation, and safety throughout the hotel. This role includes cleaning assigned guest rooms, replenishing supplies, vacuuming, cleaning windows, and ensuring all areas meet Marriott brand standards. This industry operates 24/7, and regular, dependable attendance is essential for success in this role. Education & Experience • High school diploma, GED, or equivalent, • 1-2 years of hospitality or housekeeping experience preferred, • Previous guest or customer service training a plus Qualifications • Ability to read, write, and communicate effectively in English, • Strong verbal and written communication skills, • Ability to lift/transport up to 50 lbs and push/pull carts up to 200 lbs, • Ability to stand, bend, reach overhead, and move throughout work areas for up to 8 hours, • Must be able to work a varied schedule including nights, weekends, and holidays, • Knowledge of proper cleaning techniques and equipment, • Knowledge of proper chemical handling and safety procedures, • Ability to work in guest rooms, corridors, housekeeping offices, and areas with variable temperatures, noise, odors, dust, and cleaning chemicals, • Ability to interact professionally with guests, coworkers, and management JOB RESPONSIBILITIES • Maintain complete knowledge of correct maintenance and use of equipment. Use equipment only as intended., • Use all chemicals in accordance with OSHA regulations and hotel requirements., • Complete daily report as instructed by supervisor., • Enter and prepare the room for cleaning., • Cleans guest bathroom/bedroom/floor corridor., • Dusts the room and furniture., • Clean the bathroom, remove soil, dirt, soap buildup and hair from bathroom mirrors, vanity, sink, toilet, shower walls, bathtub, shower curtain and floor., • Vacuum the carpet., • Competitive pay based on experience, • Health, dental, and vision insurance, • Short-term and Long-term disability, • Company paid life insurance, • Paid time off and holiday pay, • Employee Assistance Program, • Employee referral bonuses, • 401(k) retirement plan, • Tuition reimbursement, • Travel discounts, • Opportunities for training, development, and career advancement, • Incentive bonuses

Job Description 2nd Shift Bilingual Production Supervisor – Lead, Innovate & Drive Success! Are you a hands-on leader who thrives in a fast-paced environment? We’re looking for a 2nd Shift Bilingual Production Supervisor to oversee CHEP pallet repair operations, ensuring quality, efficiency, and safety while keeping production on track. If you have a strong leadership background and a passion for process improvement, this role is for you! Why Choose Fidelis? • Competitive Wages: $60,000-$65,000, • Fidelis Cares Program – Because life happens, and we’ve got your back, • Overtime Opportunities: Boost your earnings., • Paid Vacation and Holidays: Enjoy work-life balance., • Comprehensive Health Coverage: Medical, Dental, and Vision plans., • Financial Security: 401(K) participation and Employer Sponsored Life Insurance., • Career Growth: Open career paths and upward mobility. What We’re Looking For: • 3-5 years in a manufacturing or production setting, with 2+ years in a leadership role., • Bachelor's degree or equivalent experience., • Ability to motivate and manage teams effectively., • Quick thinker who can troubleshoot and improve processes., • Proficient in Microsoft Office and production management software., • Strong understanding of OSHA standards and compliance., • Ability to work extended hours, including weekends, when needed. What You’ll Do: • Train, mentor, and manage production staff to meet goals., • Identify and resolve bottlenecks to keep production efficient., • Oversee pallet repair to meet customer specifications., • Maintain OSHA and company safety standards at all times., • Conduct performance evaluations and provide feedback or corrective actions as needed., • Implement and adjust plans to meet targets., • Track performance data and drive continuous improvements., • Manage materials, tools, and equipment to prevent shortages., • Communicate with teams to streamline operations. Join us and be part of a team that values hard work, dedication, and a commitment to excellence. Apply today and build your career with Fidelis! In compliance with C.R.S. § 8-5-201(1) and C.R.S. § 8-5-201(2) Fidelis Logistics is committed to sharing all opportunities for promotion to all current employees and the public along with salary compensation ranges and general description of bonuses and other compensation. Fidelis Logistics is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our goal is to be a diverse workforce that is representative, at all job levels, all employment is decided on the basis of qualifications, merit and business need. Company DescriptionAt Fidelis Logistics, we specialize in high-velocity distribution, warehousing, and remanufacturing operations. Our mission is to enrich the lives of our employees while driving success for our customers and shareholders. Guided by humility, integrity, and hard work, our people are the foundation of everything we achieve. Through our Fidelis Cares Program, we support employees facing unexpected life challenges—because at Fidelis, we believe in taking care of our own. At the heart of our culture is a simple commitment: We deliver on every promise we make.At Fidelis Logistics, we specialize in high-velocity distribution, warehousing, and remanufacturing operations. Our mission is to enrich the lives of our employees while driving success for our customers and shareholders. Guided by humility, integrity, and hard work, our people are the foundation of everything we achieve.\r\n\r\nThrough our Fidelis Cares Program, we support employees facing unexpected life challenges—because at Fidelis, we believe in taking care of our own.\r\n\r\nAt the heart of our culture is a simple commitment:\r\nWe deliver on every promise we make.

Job Description Safety Manager Needed. Highland Consulting Group is a National Executive Recruiting firm that specializes in placing top talent in the Commercial & Industrial construction sectors. We have a current opportunity available for a talented Safety Manager for a large Contractor in the Richmond, VA area. This is a permanent position and not project based and gives you the opportunity to be part of a highly qualified group of safety experts. Additionally, all projects are local so virtual no travel is required. The ideal candidate will have large project experience with a minimum of 3 years experience working in a Safety capacity and have certifications such as OSHA 510, CHST, ASP, CSP, or USACE EM385. Be part of a winning team that has an extremely high safety culture. Job responsibilities will include, but are not limited to: • Create / Edit safety plans to fit the requirements of the project, • Be on-site to implement the safety plan, • Work with / train the on-site staff in safe construction practices, • Work directly with the client to manage the safety program and meet their expectations, • Prepare daily reports for management and the client, • Board Certified Safety Professional - CHST Certification, • A four year degree is required - Safety degree is preferred, • 3 Years minimum experience as a Safety Manager, • 1 years experience on major construction projects, • Candidates must have documented experience creating & editing detailed and organized information tracking systems, • Familiarity with all applicable regulations, • Someone with the ability to train staff and subcontractors is preferred, • Solid communication skills - both written & verbal, • Ability to establish timelines, • Ability to multi-task Solid proven and verifiable record of career stability and experience as a Safety Manager success is a must This company cares about and is committed to the wellbeing of all of it's employees and their families. This commitment is reflected in a comprehensive benefit package provided to all employees. These benefits also include Healthcare, 401K, Project Bonuses, Annual Company bonuses, Education / Certification allowances, paid Vacations & Holidays Contact If you have this type of experience, please apply to this position. You can also contact me directly to learn more about this opportunity. David O’Connor Managing Director (724) 837-6336 Confidentiality: We respect your privacy and will never submit a resume to a third party without your permission. You can be assured that the information you give us will never be forwarded to any company without your specific, direct permission in advance. DTO1680

Job Description At ACI we build our company and our culture not by counting people, but by making our people count! $0.00 COST FOR MEDICAL, DENTAL, SHORT TERM DISABILITY & LIFE INSURANCE (EMPLOYEE ONLY) COVERAGE! Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years. Benefits: • Medical Insurance Plan ($0.00 Employee-Only), • Dental Insurance Plan ($0.00 Employee-Only), • Short-Term Disability Plan ($0.00 Employee-Only), • Life Insurance Plan ($0.00 Employee-Only), • Vision Insurance Plan, • 401(K) Retirement Plan with Generous Company Matching, • Health Savings Plan with Generous Company Matching Summary/Objective: The QA/QC Manager is responsible for implementing and managing the Quality Assurance and Quality Control program for a high-profile commercial construction project. This role ensures that all construction activities meet or exceed the required quality standards, specifications, and client expectations. The QA/QC Manager will lead inspection efforts, maintain documentation, and drive continuous improvement through proactive field engagement and collaboration with project stakeholders. Essential Functions: Inspection & Documentation • Conduct and document daily QA/QC inspections across all trades (e.g., HVAC, plumbing, piping, fire protection)., • Complete and maintain inspection reports in accordance with project specifications and company standards., • Lead weekly QA/QC walks with trade foremen and project teams., • Create and manage observations in Procore for all deficient items, ensuring timely resolution and proper documentation., • Maintain comprehensive daily logs detailing QA/QC activities, including field conditions, inspection outcomes, and corrective actions., • Collaborate with superintendents, project managers, and subcontractors to ensure quality standards are understood and met., • Participate in internal QA/QC meetings and provide updates on field observations and trends., • Provide guidance and training to field personnel on QA/QC procedures and expectations., • Ensure compliance with all applicable codes, standards, and project specifications., • Review and verify material certifications, welding qualifications, and test reports. Supervisory Responsibility: Yes Required: • Minimum 5–7 years of QA/QC experience in commercial construction., • Proficiency in Procore or similar construction management software., • Strong knowledge of construction methods, materials, and inspection protocols., • Excellent written and verbal communication skills., • OSHA 30 and/or USACE Construction Quality Management (CQM) certification preferred., • Ability to lead field teams and enforce quality standards with professionalism and integrity., • Proven track record working with people, teams and projects, • Must be able to multi-task, work with minimal supervision, follow written and oral instructions, show attention to detail and demonstrate problem-solving skills, • Must adhere to all company policy and procedures, • Must be available to work assigned schedules Preferred: • Detail-oriented with a proactive approach to problem-solving., • Ability to manage multiple priorities in a fast-paced environment., • Familiarity with LEED, ISO 9001, or Six Sigma quality methodologies is a plus. The work environment and physical demands required would be representative of those that must be met by an employee to successfully perform the essential functions of this job, and may include, but are not limited to the following: Work Environment: • Works in a professional office environment and routinely uses standard office equipment, • Position may require visits to or working from construction sites Physical Demands: • This role routinely uses standard office equipment such as computers, phones, photocopier, filing cabinets and fax machines Travel: • May require travel (typically not overnight) Visit us at for more information! Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. An Equal Opportunity/Affirmative Action Employer QA/QC Manager - Commercial Construction - Quality Assurance and Quality Control Manager

Job DescriptionPosition Overview: The Safety Specialist is responsible for ensuring compliance with occupational health and safety (OHS) standards and driving continuous improvement across the site. This role will own the implementation and maintenance of OHS programs, conduct gap assessments against regulatory and corporate standards, and collaborate with cross-functional teams to close gaps and implement effective solutions. The Safety Specialist will champion Human and Organizational Performance (HOP) principles and Operational Learning practices to build capacity for safe operations. This includes engaging with those closest to the work to understand the difference between work as planned and work as performed, fostering a proactive safety culture, and creating systems that anticipate variation and minimize the consequences of errors. This role directly supports Celanese Cultural and Leadership Attributes, the Manufacturing Operating Model, and the Move to the Core (MttC) framework by promoting learning, resilience, and operational excellence. Responsibilities: Compliance & Program Ownership • Maintain compliance with all applicable EHS and OHS regulations, standards, and company policies., • Own and manage occupational health and safety programs, including audits, reporting, and corrective actions., • Life Critical Programs: Electrical Safety, Lockout/Tagout, Confined Space Entry, Elevated Work, Excavation, Hot Work, High Pressure Water Cleaning, Safe Work Permitting, Life Critical Posters., • Occupational Health: Chemical Management, Heat Stress, Respiratory Protection, Ergonomics, Industrial Hygiene, Hearing Conservation (Noise), Personal Protective Equipment (PPE)., • Perform gap assessments against regulatory and internal standards; develop and execute action plans to close gaps., • Implement preventive measures for identified hazards., • Apply HOP principles to recognize that variation, deviation, and mistakes will happen; focus on building capacity to absorb errors without severe consequences., • Facilitate Operational Learning sessions with frontline teams to understand work realities and identify improvement opportunities., • Promote proactive safety behaviors and create an environment that encourages employee involvement., • Track and report key safety metrics and leading indicators, including hazard recognition, near-miss events, and compliance audits., • Ensure timely closure of Incidents and Near Miss reports., • Bachelor’s degree in Occupational Safety, Environmental Health, Industrial Hygiene, or related field., • Strong knowledge of OSHA regulations, EHS management systems, and risk assessment methodologies., • Experience conducting audits, gap assessments, and implementing corrective actions., • Ability to engage and influence employees at all levels of the organization., • Strong problem-solving and analytical skills; able to identify patterns and trends., • Excellent communication and collaboration skills., • Demonstrated ability to manage complexity and drive continuous improvement., • Collaborative, persuasive, and proactive mindset., • Skilled in managing ambiguity and instilling trust., • Committed to creating a safe and compliant work environment. Powered by JazzHR NDEMY9a2FW

Job Description One Tech Engineering is searching for a Project Controls Specialist for a position located in Glen Allen, Virginia. The Project Controls Specialist will be responsible for leading the project controls processes with the internal project management team to execute project deliverables within budget and schedule The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in engineering, construction management, or a related field and 3 years of direct project controls experience. Local candidates preferred or open to relocation. This is not a remote position. Project Controls Specialist Responsibilities: • Ensure project set-up in the Enterprise Planning & Controls software., • Analyze data, review logs, and run reports in the Enterprise Planning & Controls software or other tools., • Create Work Breakdown Structure (WBS)., • Develop, implement, and maintain effective scheduling reports, cost reports, cash flows and forecasts for multiple projects., • Follow project execution plans., • Responsible for engineering, procurement and construction planning, scheduling, logistics and cost control., • Serves as a point of contact for technical questions from the project team., • Approve Purchase Orders and/or Subcontracts for proper coding., • Input and document changes to cost reports or forecasts., • Interfaces with the Project Management Team and Accounting Department to review project costs and contingency costs and support external audits., • Review upstream (prime contract) and downstream (purchase order & subcontract) change orders., • Develop and present a cash flow report., • Develop various levels of schedules., • Apply and review the entry of logic ties within the schedules., • Monitor resource loading of a schedule., • Support Interactive Project Planning Meetings (IPPM)., • Create various schedule reports and determine appropriate reporting format., • Develop, review, and analyze pre-programmed project scheduling reports and back-up documentation for accuracy., • Consults with the project team on schedule progress., • Analyzes and evaluates schedule management involving the critical path method of scheduling techniques, estimating, project cost management and forecasting., • Perform schedule what-if scenarios., • Develop and maintain an earned value management system., • Input and validate progress measurement., • Develop and maintain progress curves., • Perform material takeoffs., • Perform quality checks and inspections on project controls deliverables., • Perform field audits to validate accuracy of reporting and processes., • Bachelor’s Degree in engineering, construction management, or related field and 3 years of direct project controls experience., • Applicable experience may be substituted for the degree requirement., • Experience with Oracle Primavera P6 preferred., • Excellent written and verbal communication skills., • Excellent interpersonal skills., • Proficient with Microsoft Office., • OSHA 10-hour safety certification or the ability to obtain.

Job Description We’re leading the industry in sustainable energy careers. We understand that our employees are the lifeblood of the company. We strive to align company goals with those of our employees. We're constantly innovating to make a difference for our customers, our employees, and our planet. Our mission is to make a difference by developing cost-efficient alternatives to traditional energy sources, without long-term dependence on government subsidies. We’re leading the industry in sustainable energy careers. We hope you’ll join us. Summary: The Traveling Solar Electrical Technician is a highly motivated solar electrical technician whose demonstrated expertise enables them to perform advanced electrical, telecommunication, and mechanical repair and maintenance activities, to include testing and repair of all major and balance-of system components utilized in utility scale solar photovoltaic (“PV”) power generation. This professional will be leading and overseeing a team of PPM Special Projects Field Technicians and be responsible for scheduling and completion of special projects across the fleet. This role demands extensive travel up to 75% of the time to remote solar sites with extended stays for up to, but not limited to, 14 consecutive days. Essential Duties and Responsibilities: • Ensure that all peers and subcontractors demonstrate safe work practices in accordance with OSHA, NFPA, state and local codes, and Strata Solar Clean Energy O&M safety policies and procedures in the performance of plant maintenance activities., • Lead safety briefings that identify all potential hazards within a scope of electrical work as well as ways to mitigate exposure to any hazardous conditions., • Work on and around energized electrical parts in compliance with all electrical codes and company policies., • Use multimeter, low resistance Ohmmeter, PV Analyzer, IR thermometer, IR camera, and hand-held irradiance meter as well as a variety of hand tools in the performance of electrical maintenance work., • Perform Lockout/Tagout activities to ensure work is always performed in compliance with intended electrical isolation procedures., • Troubleshoot & diagnose common Direct Current (“DC”) faults within the PV plant., • Review and update work orders for accuracy., • Complete and submit all assigned inspection and testing data as required., • Create excellent, detailed documentation., • Travel to various sites across the company portfolio., • Troubleshoot & diagnose a wide range of Direct Current (“DC”) faults within the PV plant. Education and/or Work Experience Requirements: Physical Requirements/Work Environment: • Must be able to work in an outdoor environment and be able to travel occasionally to remote project sites., • Must be able to sit, stand or walk for the entire duration of a shift., • Must be able to stoop, kneel or bend., • Must be able to lift, push or pull 50 lbs. overhead repeatedly., • 20/40 vision in each eye, with or without correction and ability to distinguish colors., • Ability to wear full complement of Personal Protective Equipment (PPE) as required., • Must have the ability to travel up to 75 % of the time, work on-call during off-shift hours and weekends. About Us Strata Clean Energy is a leading developer, EPC, and service provider for utility-scale solar and storage systems in the United States. We control and self-perform all processes from our nationwide solar and storage developments, to construction, O&M, and Asset Management. Our employees are empowered to drive our business in a collaborative, creative, and passion-driven environment that fosters long-term professional growth. There is a lot to learn at Strata, but we’re here to help you give your best and have a good time doing it. At Strata, you’re part of something big. We’re leading the industry in sustainable energy careers. We are driving innovation to make a difference for our customers, our employees, and our planet. Join us in powering the future. Strata Solar is an equal opportunity and affirmative action employer. Strata Solar is an equal employment and affirmative action employer whereby we do not engage in practices that discriminate against any person employed or seeking employment based on race, color, religion, sex, sexual orientation, gender identity, national or ethnic origin, age, marital status, disability, veteran status, genetic information or any other status or characteristic protected under applicable law. #LI-SS1

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Health insurance, • Paid time off Description To work on heavy highway, road and bridge construction and maintenance projects, monitoring contractors, ensuring quality control and contract. Construction Inspector will be working under the direction of a Senior Construction Inspector, Construction Manager or another designee. Requirements Essential Functions Performance of Material Testing and Inspections or overseeing the material testing of third parties Taking field measurements Read and Interpret Plans and Contract documents for structures, bridges, roadways, etc.. Inspection of various aspects of work and project installation to ensure proper construction. May include inspection of excavations, drainage facilities, soil and aggregate placement, concrete placement, structure installations, paving operations, etc. Document pay quantities for current and final estimates. Complete Daily Summary of Construction Activities and work performed. Daily interaction with a contractor and ability to work with contractors superintendent and foreman. Ability to advise contractors of violations. Ability to make recommendations of adjustments required. Ability to report to Senior Inspector, Construction Manager or Designee status of construction operations. Reviews lines, grades, dimensions, and elevations using standard survey and field engineering equipment. Inspection of Erosion and Sediment Control Installations for environmental compliance. Inspection of BMP installations Inspection of Roadway Traffic Control and work zone safety. Maintains project records; including daily diaries, materials notebooks, as-built plans, pay quantity records, and monthly estimates Reviews and monitors Equal Employment Opportunity/Disadvantaged Business Enterprise (DBE) documentation and compliance with Federal labor requirements/regulations for Federal-aid construction projects, ensuring contractor compliance with program requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies 1.Communication proficiency 2.Ethical Conduct 3.Flexibility 4.Initiative 5.Time Management Supervisory Responsibility This position does not have supervisory responsibilities. Work Environment This job is performed in a professional office environment and or transportation construction job sites. This role routinely uses field and standard office equipment such as computers, phones, photocopiers, filing cabinets, tablets, digital cameras, nuclear gauges, surveying tools and other field-testing equipment materials. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; climb, drive; lift things, use hands; and reach with hands and arms. Position Type/Expected Hours of Work This is a full-time position. This position typically works 40 or more hours per week. Day shifts usually start between 6:00 and 9:00 a.m. and last 8 to 10 hours. Project assignments can also require night or weekend work. Flexibility to meet client or contractor schedule is important. Travel Most assignments do not require more than an hour of travel to and from job sites. However, some assignments will require extensive regional travel each day and others could require staying out of town overnight if distance to job site is greater than 90 miles from home. Required Education and Experience Expected to have three (3) years of highway construction inspection experience. Additional the Construction Inspector shall have a working knowledge of: Roadway, structure and bridge construction/maintenance/repair/rehabilitation methods, materials, standards and specifications VDOT Road and Bridge Specifications, Road and Bridge Standards, Construction Manual, and Inspector Manual VA Manual on Uniform Traffic Control Devices (MUTCD) State and federal environmental, safety, and Equal Employment Opportunity guidelines and regulations Use of contract management software including Site Manager, PlanGrid and/or AWP Mathematics including algebra, geometry, and trigonometry Preferred Education and Experience Required to have and maintain the following certifications: Certification Issuing Agency Soil and Aggregate Compaction VDOT or NICET LEVEL II* Asphalt Field Level I & II VDOT American Concrete Institute ACI Pavement Marking VDOT Slurry Surfacing VDOT Surface Treatment VDOT Flagger Certification VDOT Certification for Erosion and Sediment Control Inspection Virginia DEQ Nuclear Gauge Safety Training NRCRecognized Provider Stormwater Management (Inspector) Certification* Virginia DEQ Intermediate Work Zone Traffic Control VDOT Approved Provider 10 Hour OSHA Safety Training OSHA GRIT (Guardrail Certification) VDOT Additional Eligibility Qualifications The Construction Inspector is expected to be proficient with the following skills: Operating computer equipment, software programs and field inspection equipment including Site Manager, PlanGrid and/or AWP Functional computer usage including familiarity with Microsoft Office Suite software Read and interpret roadway, structure and bridge plans and specification Apply mathematical formulas and engineering principles to determine minor field adjustments Maintain detailed records Perform and document required materials testing Communicate with the client and contractor personnel and the general public Work Authorization/Security Clearance (if applicable) Must be eligible to work in the U.S. and pass a client background check if asked. AAP/EEO Statement Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description At ACI we build our company and our culture not by counting people, but by making our people count! $0.00 COST FOR MEDICAL, DENTAL, SHORT TERM DISABILITY & LIFE INSURANCE (EMPLOYEE ONLY) COVERAGE! Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years. Benefits: • Medical Insurance Plan ($0.00 Employee-Only), • Dental Insurance Plan ($0.00 Employee-Only), • Short-Term Disability Plan ($0.00 Employee-Only), • Life Insurance Plan ($0.00 Employee-Only), • Vision Insurance Plan, • 401(K) Retirement Plan with Generous Company Matching, • Health Savings Plan with Generous Company Matching Summary/Objective: The Electrical Shop Manager's responsibilities include, but are not limited to, managing the day-to-day operation of the trade shop including safety, leadership, production, materials, and quality assurance over the course of the fabrication process. Essential Functions: • Is responsible for safety compliance and adherence to all OSHA, VOSHA, and ACI safety standards. This may include but is not limited to safety meetings, taking corrective actions, administering aid, investigating accidents, and reporting on safety matters., • Sets goals as related to scheduling and assigns workloads to the shop foremen/leaders to meet necessary production goals., • Responsible for start-up and manning a second shift including assigning workload goals for shift including leadership delegation., • Proofs all incoming work to the shop for errors, viability of manufacturing, ordering, and safety. This may include entering work via a CNC/CAM program for use by the shop equipment and/or tracking software., • Responsible for shop production and tracking reports., • Responsible for maintaining all scheduling for work in progress as per the shop (trade) and communicates any changes in deliverables to the appropriate operational team members. Serves as the main point of contact if any external scheduling changes/priorities are needed., • Orders materials and consumables as necessary for projects which may include any number of the following (gathering quotes, placing orders, writing purchase orders, tracking orders, billing, and updating statuses). This includes meeting with our vendors and assuring we are getting the best value for our needs., • Evaluates and maintains the manpower needs of the shop which includes hiring and managing disciplinary measures to promote a viable workforce., • Manages all shop time which includes any added temp labor including time and billing., • Is responsible for all shop equipment and tools which includes managing tool accounts, rentals, scheduling repairs, setting maintenance schedules, managing tool lists, and setting budgetary needs for new equipment., • Oversees inter-trade QA/QC standards to ensure compliances are being followed including corrective actions where/when needed., • Leads the shop team to improve processes for safety, better efficiency, time management, and materials usage. This also includes working with and/or communicating with the Fabrication manager on such improvements., • Provides ongoing training and development in leadership practices where/as needed., • Evaluates and conducts year-end reviews of our workers., • May be involved with smaller spot estimates and estimate verifications., • May attend some/all/but not limited to (turnover meetings, kickoff meetings, prefab meetings, schedule meetings, production meetings, and planning meetings)., • Performs other duties as assigned. Supervisory Responsibility: Yes Required: • 10+ years of combined education and/or experience in/or a related field., • Experience with leading teams., • Proficient in reading construction drawings. (Blueprints), • Experience in looking up job specifications and submittals., • Excellent math and writing skills., • Proficient computer skills in 3 or more of the following. (CAD, CAM, CNC, Bluebeam, M-Suite, Build Centrix, Vista, or Microsoft Office), • Able to read simple Gantt charts or other construction schedules., • An understanding of shop equipment including related equipment maintenance upkeep., • A general understanding of the necessary trade codes and best practices., • Must adhere to all company policy and procedures., • Must be available to work assigned schedules and extended hours as needed including day, evening, weekend, and holiday hours. The work environment and physical demands required would be representative of those that must be met by an employee to successfully perform the essential functions of this job and may include but are not limited to the following: Work Environment: • Works in a shop/manufacturing environment., • May work in varying temperatures; both inside and outside, including inclement weather, heat, humidity, cold and dampness., • May work in areas with exposure to moderate/high noise levels., • May be exposed to fumes or airborne particles including dust., • May be required to work in confined spaces or from high heights. Physical Demands: • Site visits will require walking through existing buildings, industrial plants and/or on-going construction sites. This will involve stairs and at times ladders on multiple floors/levels., • This role at times, may use construction equipment such as heavy machinery, hand and power tools including powered machinery., • While performing duties of the job, the employee may work aloft, climb, bend, pulling reach overhead, stand/walk for long period of times, and lift up to 50 lbs., • Frequently is required to use hands to finger, handle or feel objects, tools or controls; and reach with hands and arms., • May require travel (typically not required or overnight) Preferred: • Trades education certificate, Journeyman, or an Associate's degree in a related field., • Prior Military experience., • Prior management experience Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. An Equal Opportunity/Affirmative Action Employer -- Electrical Shop Manager

Job Description Join the Fidelis Team as a Maintenance Supervisor! We are seeking a Maintenance Supervisor to lead and support our maintenance operations, ensuring all equipment, machinery, and facility systems run safely and efficiently. This is a hands-on leadership role that works closely with Maintenance Technicians to perform repairs, preventive maintenance, and troubleshooting - minimizing downtime and keeping production running strong. Why Choose Fidelis? • Competitive Wages: $70,000-$80,000 + Yearly Bonus Opportunity!, • Fidelis Cares Program: Because life happens, and we've got your back., • Paid Vacation and Holidays: Enjoy work-life balance., • Comprehensive Health Coverage: Medical, Dental, and Vision plans., • Financial Security: 401(K) participation and Employer-Sponsored Life Insurance., • Career Growth: Clear pathways for advancement and skill development. What We're Looking For • High School Diploma or GED required; post-secondary vocational training preferred., • 3-5 years of industrial maintenance experience, including 2+ years in a supervisory or lead role., • Hands-on experience with mechanical, electrical, hydraulic, pneumatic, and PLC systems., • Skilled in MIG/ARC welding, fabrication, and troubleshooting of production machinery., • Strong leadership and communication skills; ability to train and guide Maintenance Technicians., • Experience using CMMS (Computerized Maintenance Management Systems) for scheduling and tracking., • Knowledge of OSHA standards and commitment to a safety-first culture., • Flexibility to work varied hours, including evenings, weekends, or on-call when needed. What You'll Do • Supervise, train, and work alongside Maintenance Technicians on preventive maintenance, troubleshooting, and repairs., • Partner with the Plant Manager and production teams to plan and prioritize daily maintenance activities., • Inspect, maintain, and repair mechanical, electrical, hydraulic, and pneumatic systems - including PLCs and control panels., • Utilize CMMS to schedule, record, and track maintenance tasks and ensure compliance., • Perform welding, fabrication, and installation of new equipment and systems., • Manage parts inventory, vendors, and contractors to ensure timely repairs and service., • Promote and enforce company safety standards, conducting regular checks and training., • Maintain accurate documentation of all maintenance activities and communicate updates to leadership. Our Employees Proudly Say, "Fidelis CARES!" Join a team that values safety, teamwork, and craftsmanship - where your leadership makes a direct impact every day. Apply today and grow your career with Fidelis Logistics. Company DescriptionAt Fidelis Logistics, we specialize in high-velocity distribution, warehousing, and remanufacturing operations. Our mission is to enrich the lives of our employees while driving success for our customers and shareholders. Guided by humility, integrity, and hard work, our people are the foundation of everything we achieve. Through our Fidelis Cares Program, we support employees facing unexpected life challenges—because at Fidelis, we believe in taking care of our own. At the heart of our culture is a simple commitment: We deliver on every promise we make.At Fidelis Logistics, we specialize in high-velocity distribution, warehousing, and remanufacturing operations. Our mission is to enrich the lives of our employees while driving success for our customers and shareholders. Guided by humility, integrity, and hard work, our people are the foundation of everything we achieve.\r\n\r\nThrough our Fidelis Cares Program, we support employees facing unexpected life challenges—because at Fidelis, we believe in taking care of our own.\r\n\r\nAt the heart of our culture is a simple commitment:\r\nWe deliver on every promise we make.

Job Description Job Title: Advanced Manufacturing Machine Operator Apprentice As an Advanced Manufacturing Machine Operator Apprentice, you’ll start with a short pre-apprenticeship training program that equips you with the essential skills employers are looking for. During this time, you’ll have the chance to interview with multiple partner companies for potential full-time employment opportunities. Once you complete the pre-apprenticeship and receive a job offer, you’ll begin full-time employment with a VMA partner company while advancing through a 12-month Registered Apprenticeship. This unique program blends paid, hands-on work experience with flexible, self-paced technical training. The result? You’ll earn industry-recognized credentials, real-world experience, and full-time wages—all at no cost to you. At the end of the apprenticeship, successful apprentices receive their Virginia Journeyworker Certification, become eligible for wage progression, and continue with full-time employment at their apprenticeship company. Key Responsibilities • Operate and monitor production machinery and equipment, • Perform basic machine setups and changeovers as required, • Inspect parts and products during production for quality and consistency, • Follow safety protocols and wear appropriate personal protective equipment (PPE), • Read and follow work instructions, standard operating procedures (SOPs), and production schedules, • Communicate effectively with team members and supervisors to ensure smooth workflow, • Maintain a clean, organized, and safe work environment, • Manufacturing Essentials – Workplace communication, job readiness, punctuality, and career awareness, • Math & Measurement – Fractions, decimals, algebra, unit conversions, and core measurement tools, • Manufacturing Technology – Blueprint reading, mechanical/electrical systems, hydraulics, pneumatics, PLCs, robotics, • Quality & Business Acumen – Lean manufacturing, Six Sigma, process improvement, quality control, and basic cost principles, • Pre-apprenticeship training to prepare you for success before your first day on the job, • Full-time employment opportunitites with a VMA partner manufacturer from day one, • Earn while you learn—get paid while completing a state-registered apprenticeship, • Self-paced technical training totaling across five focus areas, • Industry-recognized certification and Virginia Journeyworker Credential upon completion, • Wage progression and continued full-time employment after successful completion, • Motivated individuals ready to launch a manufacturing career, • Career changers looking to gain in-demand technical skills, • High school graduates, adult learners, or veterans seeking skilled trade pathways Company DescriptionThe Virginia Manufacturers Association is the only statewide association in Virginia exclusively dedicated to manufacturers and their allies—serving as the industry’s advocate since 1922. We partner with leading Virginia companies to assess, train, and place candidates into high-quality manufacturing careers across the Commonwealth.The Virginia Manufacturers Association is the only statewide association in Virginia exclusively dedicated to manufacturers and their allies—serving as the industry’s advocate since 1922. We partner with leading Virginia companies to assess, train, and place candidates into high-quality manufacturing careers across the Commonwealth.

Job Description At ACI we build our company and our culture not by counting people, but by making our people count! $0.00 COST FOR MEDICAL, DENTAL, SHORT TERM DISABILITY & LIFE INSURANCE (EMPLOYEE ONLY) COVERAGE! Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years. Benefits: • Medical Insurance Plan ($0.00 Employee-Only), • Dental Insurance Plan ($0.00 Employee-Only), • Short-Term Disability Plan ($0.00 Employee-Only), • Life Insurance Plan ($0.00 Employee-Only), • Vision Insurance Plan, • 401(K) Retirement Plan with Generous Company Matching, • Health Savings Plan with Generous Company Matching Summary/Objective: We are seeking a highly experienced and driven Senior MEP Superintendent to lead and manage all mechanical, electrical, and plumbing (MEP) operations on large-scale commercial construction projects. The Senior MEP Superintendent plays a critical role in delivering complex projects by overseeing field execution, coordinating trades, enforcing safety, and ensuring compliance with plans, codes, and quality standards. This leadership position is ideal for candidates with a proven track record of success in managing MEP scopes as Superintendent on high-value, fast-paced construction projects such as hospitals, data centers, high-rise buildings, or advanced manufacturing facilities. Essential Functions: • Senior Superintendents supervise field Superintendents for MEP (Mechanical, Electrical, and Plumbing) operations on our commercial construction projects, • Supervises larger projects as the General Superintendent or several small jobs at one time, • Acts as liaison with engineering, estimating, and project teams, to ensure compliance with drawings, specifications, and scheduling is being met, • Coordinates with other departments (i.e., Quality Control and Engineering) to ensure all required materials and equipment, inspections, and support craft activities, • Provides guidance and direction to crews in budgeting and scheduling. Ensures that production numbers are being reached along with forecasting what it will take to complete the phase codes, • Ensures job quality and customer satisfaction is maintained at every project stage, • Strong relationship building skills with clients, customers, and vendors to cultivate a positive work environment, • In addition to supervisory responsibility, responsible for directly performing a wide range of skilled construction tasks, • Holding crews responsible and accountable for making sure AXIOM is kept up to date with daily production reports, look ahead' s complete and more, • Resolves problems in a variety of construction issues, including productivity monitoring, craft compliance with project safety program requirements; documenting and implementing corrective action, • Performs other duties as assigned, • Ensure a safe work environment, • Ensure foreman are conducting work with crews safely, • Coordinate safety on site, • Ensure foreman have material ordered & staged for crews, • Axiom and reviewing Foreman's Daily logs along with reviewing their notes and helping eliminate the constraints., • Understand the project job cost, • Contract obligations, inclusions and exclusions., • Review of the job cost with the PM, PC, and foreman, • Pre- POC forecast due the week before monthly POC meeting., • Assist in projection of labor, • Review job cost with trade specific foremen, • Drawing review, • VDC interaction and coordination during drafting, • VDC reviews & coordination team meetings, • Weekly Fabrication meeting with Daniel and updates for pre-fabrication, • Schedule reviews and confirm areas available for installation, • manpower management and projections, • Equipment release review with PM along with confirming equipment counts, equipment handing, • Ensure proper resources (tools, rental equipment, materials) are on the project when needed, • Engage foreman teams with planning for efficiency, • Create a positive work environment Supervisory Responsibility: Yes Required: • 6+ years previous experience as a General Foreman, General Superintendent and/or equivalent combination of vocational training and experience, • Ability to successfully supervise large crew (20+), • Prior experience supervising large teams, • Previous knowledge of man hour reports, job cost reports, workforce planning and estimating, • Advanced understanding of construction cost control, forecasting and setting goals, • Effective communication (verbal and written) and interpersonal skills, demonstrated ability to work across varied disciplines, • Ability to effectively present information to customers, clients, and colleagues, • OSHA 30 and CPR, • Demonstrated knowledge of, reading, interpreting, and working to:, • Design drawings (isometric and orthographic), design guides, specifications, • Support Drawings and specifications, • Contract documents and site coordination of subcontractors, • Must be able to multi-task, work with minimal supervision, follow written and oral instructions, show attention to detail, and demonstrate problem-solving skills, • Must adhere to all company policy and procedures, • Must be available, and have the means to report to multiple job sites as assigned The work environment and physical demands required would be representative of those that must be met by an employee to successfully perform the essential functions of this job, and may include, but are not limited to the following: Work Environment: • May work in varying temperatures; both inside and outside, including inclement weather, heat, humidity, cold, and dampness, • May work in areas with exposure to moderate/high noise levels, • May be exposed to fumes or airborne particles including dust, • May be required to work in confined spaces or from lofty heights Physical Demands: • This role routinely uses construction equipment such as heavy machinery, hand, and power tools, • While performing duties of the job the employee may work aloft, climb, bend, pull, reach overhead, stand/walk for extended periods of time and lift to 50 lbs., • Frequently is required to use hands to finger, handle or feel objects, tools, or controls; and reach with hands and arms, • Must be able to correctly identify all colors of a color-coded cable/wires and see close vision, distance vision, depth perception, peripheral vision, and ability to adjust focus Travel: • May require travel (typically not overnight) Preferred: • 10+ years' experience in a heavy mechanical construction environment as Superintendent, • Prior military experience, • HS diploma or GED equivalent Please visit for more information! Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. An Equal Opportunity/Affirmative Action Employer

Job DescriptionSalary: $75,000-$90,000 POSITION SUMMARY This position works independently to provide timely, thorough and accurate budget estimates, comprehensive project budgets, hard and negotiated bid proposals, pertinent and accurate advice on cost savings and value engineering to project teams. The Estimator will complete conceptual cost plans, provide accurate quantity surveys, evaluate pricing, compare and analyze bids, create project specific subcontractor lists, maintain relationships with the subcontracting community, clarify discrepancy areas with the project architect and work constructively within a team environment. ESSENTIAL DUTIES AND RESPONSIBILITIES • Must assess and understand all bid submittal requirements, project general requirements, government and code requirements impacting the work of the project., • Develop accurate quantity takeoffs and cost estimates for all phases of construction work with emphasis on the self-performed general conditions, concrete, masonry, and carpentry, • Prepare estimates and issue proposals for concrete projects after reviewing design documents, drawings, specifications, and completing quantity take-offs., • Communicate with general contractors/construction managers to clarify scope of work and schedule requirements, • Solicit and negotiates quotes from various vendors and subcontractors to obtain the most competitive cost for materials, equipment and sub-contractor labor., • Actively participate in the internal review of estimated, • Review total estimate to ensure accuracy and completeness prior to final, • Participate in hard bid estimating as well as assisting clients in developing schematic and GMP, • Build relationships with subcontractors, vendors, and general, • Organize and distribute all construction documents in a timely manner to subcontractors, vendors, and suppliers for, • Attend pre-bid meetings, scope review meetings, reviews proposals and negotiates with, • Transition awarded projects to project management and accounting by creating budgets, conducting turn over meetings to other team members, identifying special project requirements, subcontractors, and vendors, • Responsible for estimated and won projects from inception until project is completed. Providing estimating support for the Project Management team throughout the project., • Conduct comprehensive post bid subcontractor scope reviews and project buyout. Follows up on bids for updates on status., • Undertake a variety of concrete estimating assignments as required to help the company grow and improve., • Always maintain high standards of professionalism and commit to excellence in the marketplace by understanding and exceeding customer expectations through integrity, honesty and ethical, • Consistently monitor the latest building codes, pricing structures, new materials, new constructability concepts and trends within the concrete industry., • Build and develop trusting relationships with current customers and seek to identify opportunities to grow our customer base and build positive relationships., • Performs other related duties as required or directed EDUCATION, QUALIFICATIONS, AND/OR EXPERIENCE • Minimum of 3-5 years of experience in commercial construction performing cost estimation of concrete construction projects. Experience with elevated structural concrete work is preferred., • High degree of concrete construction knowledge and analytical, • Ability to read and understand project plans and, • Excellent verbal and written communication, • Strong time management and organizational skills, • Proficiency with computers and software, including Microsoft Office, digital take off programs, Bluebeam, and on-screen takeoff., • Ability to effectively manage multiple projects and tasks, with an emphasis on thoroughness, and attention to detail., • Ability to work in a fast-paced professional and team-oriented environment PHYSICAL DEMANDS AND WORK ENVIRONMENTAL FACTORS (The factors described here are representative of those physical demands that must be met by an employee to successfully perform the essential functions of this job. The environmental factors described are representative of those encountered while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. ADDITIONAL FACTORS: Core Competencies: • Promote creative, innovative solutions to construction challenges and enjoy the pursuit and acquisition of profitable work., • Ability to accurately read and interpret construction drawings and specifications and have a working knowledge of OSHA 1926, • Must be detail oriented, technically sound, have good communication skills and bring a positive attitude to the work environment.

Job DescriptionJob Description: Nurse Practitioner Monogram Health is looking for skilled Nurse Practitioners and Physician Assistants eager for the opportunity to make a difference in patients' lives. The Advanced Practitioner at Monogram Health is a key member of an integrated Care Team which includes a Registered Nurse and a Social Worker. The patients we serve often struggle with multiple serious diseases. Our Nurse Practitioners and Physician Assistants help patients improve their quality of life in the home and slow the progression of kidney disease, enabling positive health outcomes. Your Impact Using your skills in this position will allow you to deliver personalized compassionate medical care to individuals mainly with CKD and/or ESRD/ESKD. You will also be responsible for caring for patients, maintaining accurate and current patient records and scheduling, and administering follow-up appointments to patients as required. Your gifts as a healthcare professional are urgently needed. In healthcare systems, the patient has too often become secondary due to processes and incentives that don’t positively impact the patient for the long term. Here at Monogram, we strive to change that narrative by putting our patients and their quality of life at the forefront of what we do. Roles and Responsibilities • Conducts assessments, which includes comprehensive annual wellness exams on patients both in the patients' home and in the virtual environment, • Counsels and educates patients and families about benefits and programs available to help them live healthier lives, • Documents items such as: appropriate chief complaint, all applicable diagnosis, past medical, family, and social history, review of systems, examinations, medications, allergies, assessment, and plan, • Responsible for the coordination of care with primary care providers, specialists, and appropriate ancillary services, • Completes all documentation and paperwork in a timely manner, • Maintains quality of care standards as defined by the practice, • This position will not be office-based but will be remote in state in which employed and will need to attend periodic training/meetings outside of that state, • Deliver evidence-based, timely care in a manner that reduces avoidable hospitalizations, maximizes quality of life, and puts patient health and satisfaction first, • Prescribe medications, order tests, and collaborate with patient’s Monogram physician, • Perform effectively, as reflected by improved patient quality outcomes, which will be measured and reported daily, • Facilitates closing gaps in care by educating patients about preventive monitoring and working with physician practices to schedule diagnostic testing, • Assists patients with enrolling to access educational videos, • Participates in the integrated care team meetings, • Knowledge of disease diagnosis and prevention, • Make assessment of patient's health status, • Develop treatment plan, • Implement a plan consistent with appropriate plan of care, • Follow-up and evaluate patient's status, • Other duties as assigned Position Requirements, • Bilingual (English/Spanish) highly preferred, • Basic Life Support (BLS) certification is required in this role. The company will support your certification completion through onboarding., • Active and unrestricted Registered Nurse and Nurse Practitioner or Physician Assistant license, • Board certified for appropriate licensure (NP: ANCC/AANP; PA: NCCPA), • Current and unrestricted DEA certificate, • Ability to work without direct supervision and practice autonomously, • Access to transportation, a valid driver's license, and car insurance, • Must be proficient with medical instruments and equipment required by the work, • Knowledge of computer-based data management programs and information systems, as well as medical records and point-of-interview technology, • Ability to communicate effectively in verbal and written form with retail and medical partners at various levels, patients, family members, physicians and representatives of the community, • Sound understanding of all federal and state regulations including HIPAA and OSHA, • 2 or more years of direct patient care required, • Managed Care/IPA/Health Plan experience, • Experience conducting annual wellness visits or similar comprehensive visits virtually or in the home Benefits, • Comprehensive Benefits - Medical, dental, and vision insurance, employee assistance program, employer-paid and voluntary life insurance, disability insurance, plus health and flexible spending accounts, • Financial & Retirement Support – Competitive compensation, 401k with employer match, and financial wellness resources, • Time Off & Leave – Paid holidays, flexible vacation time/PSSL, and paid parental leave Monogram Health employs a robust clinical team, leveraging specialists across multiple disciplines including nephrology, cardiology, endocrinology, pulmonology, behavioral health, and palliative care to diagnose and treat health issues; review and prescribe medication; provide guidance, education, and counselling on a patient’s healthcare options; as well as assist with daily needs such as access to food, eating healthy, transportation, financial assistance, and more. Monogram Health is available 24 hours a day, 7 days a week, and on holidays, to support and treat patients in their home. Monogram Health’s personalized and innovative treatment model is proven to dramatically improve patient outcomes and quality of life while reducing medical costs across the health care continuum.

Job DescriptionPrimary Job Title: Senior Project Controls SpecialistAlternate / Related Job Titles: • Project Controls Lead, • Senior Cost & Schedule Controls Specialist, • Project Scheduling & Controls Analyst, • Capital Project Controls Specialist, • Lead project controls setup and execution within Enterprise Planning & Controls systems, • Develop and maintain Work Breakdown Structures (WBS), • Create and manage schedules at multiple levels of detail, • Apply and review logic ties, critical paths, and resource loading, • Perform schedule what-if scenarios and impact analysesCost, Forecasting & Reporting, • Develop and maintain cost reports, schedules, cash flows, and forecasts, • Input, document, and manage changes to cost reports and forecasts, • Develop and present cash flow reports, • Review upstream (prime contract) and downstream (PO & subcontract) change orders, • Approve Purchase Orders and Subcontracts for proper coding, • Interface with Accounting to review project costs, contingencies, and support auditsPerformance Measurement & Analysis, • Develop and maintain an earned value management system (EVMS), • Input and validate progress measurement and maintain progress curves, • Analyze schedule performance using Critical Path Method (CPM) techniques, • Perform material takeoffs and validate quantities, • Conduct quality checks on project controls deliverablesCollaboration & Governance, • Serve as a technical point of contact for project controls and scheduling questions, • Support Interactive Project Planning Meetings (IPPM), • Consult with project teams on schedule progress and recovery strategies, • Perform field audits to validate reporting accuracy and processes, • Assist with project forensic analysis as needed, • Ensure compliance with all company policies, standards, and safety requirementsRequired Experience & QualificationsRequired, • Bachelor’s degree in Engineering, Construction Management, or related field, plus 3+ years of direct project controls experience, • (Applicable experience may substitute for degree requirement), • Strong experience with project scheduling, cost control, and forecasting, • Proficiency with Microsoft Office, • Excellent written, verbal, and interpersonal communication skills, • Ability to obtain OSHA 10-hour Safety CertificationPreferred, • Experience with Oracle Primavera P6, • Background supporting engineering, procurement, and construction (EPC) projectsWork Environment, • Infrastructure and construction-focused project environment, • Close collaboration with project managers, engineers, accounting, and field teams, • High accountability role supporting schedule, cost, and performance transparencyContract Benefits (U.S. Jobs Only), • Medical Insurance, • Vision Insurance, • Dental Insurance We are a Native American-owned, economically disadvantaged corporation that highly values diverse and inclusive workplaces. Our clients and partners are among the most successful and innovative organizations in the world. Our top clients are Fortune 500 banking, insurance, and financial services firms, some of the nation’s largest life sciences, biotech, utility, and retail companies, and prestigious educational institutions in the Ivy League tier. There is always a new opportunity for success when you look through all of the open job opportunities on our website’s career page. Just click on this link: Awards SIA’s Fastest Growing Staffing Firm: 2023 and 2015 SIA’s Best Staffing Firm to Work for: 2019 -2023 Inc 5000 Fastest Growing Private Company: 2023, 2022, 2016, 2015 Randstad Preferred Supplier: 2020 - 2023 TechServe Alliance Excellence Award. 2019 NH Business Magazines Fast 5 fastest growing companies Ernst & Young Entrepreneur of the Year Finalist: 2015Global Technical Talent is a subsidiary of Chenega Corporation () with over 1.3 billion US$ in revenue and 5800 US employees. We provide Total Talent Solutions, Global staffing, SOW, RPO, Direct Sourcing, and Global Payroll with physical offices in US, Canada, and India. GTT Digital headquartered in Toronto specializes in providing high-tech digital and banking talent to some of the nation’s largest financial institutions. As a leader in the staffing industry for over 22 years, we have become one of the largest staffing firms in the New England region, working with Fortune 500 clients and cutting-edge, technology-driven recruiting infrastructure.\r\n\r\nWe are a Native American-owned, economically disadvantaged corporation that highly values diverse and inclusive workplaces. Our clients and partners are among the most successful and innovative organizations in the world. Our top clients are Fortune 500 banking, insurance, and financial services firms, some of the nation’s largest life sciences, biotech, utility, and retail companies, and prestigious educational institutions in the Ivy League tier.\r\n \r\nThere is always a new opportunity for success when you look through all of the open job opportunities on our website’s career page. Just click on this link: \r\n \r\nAwards\r\n\r\nSIA’s Fastest Growing Staffing Firm: 2023 and 2015\r\nSIA’s Best Staffing Firm to Work for: 2019 -2023\r\nInc 5000 Fastest Growing Private Company: 2023, 2022, 2016, 2015\r\nRandstad Preferred Supplier: 2020 - 2023\r\nTechServe Alliance Excellence Award. 2019\r\nNH Business Magazines Fast 5 fastest growing companies\r\nErnst & Young Entrepreneur of the Year Finalist: 2015

Job Description Our team is seeking an experienced Construction Project Manager with a strong background in MEP (Mechanical, Electrical, and Plumbing) systems to manage complex mechanical building construction projects in Central Virginia. In this role you will enjoy being onsite and seeing your work and team really be hands on. Join our winning team and BRING BUILDINGS TO LIFE! Who we are: At ColonialWebb, we are deeply committed to our people, our culture, and the continued growth of our business. As a full-service MEP (Mechanical, Electrical, and Plumbing) contractor, we pride ourselves on the quality and expertise of our teams, who work across a diverse range of specialties, including New Construction, Mechanical Service, Industrial Refrigeration, and Manufacturing. For over 50 years, we've been dedicated to delivering comprehensive solutions and unmatched service to our commercial customers, earning a reputation as a trusted contractor in the industry. Perks of working at ColonialWebb: • Competitive salary, • Opportunities for career growth, training, and development, • 401(k) plan with a generous company match, • Personal leave, paid holidays, bereavement leave, • Excellent Medical, dental, vision, and Rx drug insurance, • Phone allowance / company phone, • Car allowance and fuel card, • Tuition reimbursement, • Employee referral incentives, • Scholarship program for employees’ children, • Assume primary responsibility for the redemption of equipment, material and subcontractor estimates, secondary responsibility for labor and other costs, • Follow specific directions from project supervision as well as assign workers to specific duties, • Inspect work in process and completed work to ensure conformance to specifications, • Interpret specifications, blueprints, and job orders as needed for area of installation, • Review and release ColonialWebb Shop Drawings and Spool Drawings for timely field installation, • Establish and adjust work sequences to meet construction schedules, using knowledge of capacities of equipment and assigned personnel, • Teach, coach and provide direction to mechanics, apprentices and helpers to ensure that they work safely, deliver quality, and work productively, • Serve as Business Manager for ColonialWebb on construction projects, • Plan and coordinate with Construction Manager on project requirements as they relate to schedule, sequence, production and quality, • Perform other duties as assigned by supervisor Assume responsibility for submittal, operations, maintenance and closeout process * Plan and coordinate with Construction Manager on project requirements as they relate to schedule, sequence, production and quality • A minimum of five years of commercial/industrial project management experience, • Experience with hands-on management of projects in excess of $10m (single project) Mechanical portion of total contract at $10+ million, • Ability to manage continuous flow of material and labor for large projects lasting a year or more, • Recent experience as PM for a mechanical contractor/subcontractor. (Not Owner’s Agent or Consultant or GC), • OSHA 30-hour certification and knowledge of OSHA safety regulations., • Ability to use current technology (i.e., laptop computer, tablet, smartphone, Microsoft Teams), • Ability to deal diplomatically and effectively with internal and external customers, • Ability to work within precise standards of accuracy, make decisions based on measurable criteria and comprehend technical data, • Ability to demonstrate foresight and problem-solving skills to make sound business decisions, • Experience with management of active work in progress of $15k - $20m across several projects Apply online: . EOE M/F/Disability/Vets Company DescriptionColonialWebb is the regional leader of superior installation, maintenance, and service of building mechanical and electrical systems.ColonialWebb is the regional leader of superior installation, maintenance, and service of building mechanical and electrical systems.

Job Description Our team is seeking an experienced Sr. Construction Project Manager with a strong background in MEP (Mechanical, Electrical, and Plumbing) systems to manage complex mechanical building construction projects in Central Virginia. The primary responsibility of the Senior Project Manager is to provide project level oversight including customer relations, contract and job cost management, planning and forecasting. The Senior PM is also responsible for the development of PMs and PEs. Who we are: At ColonialWebb, we are deeply committed to our people, our culture, and the continued growth of our business. As a full-service MEP (Mechanical, Electrical, and Plumbing) contractor, we pride ourselves on the quality and expertise of our teams, who work across a diverse range of specialties, including New Construction, Mechanical Service, Industrial Refrigeration, and Manufacturing. For over 50 years, we've been dedicated to delivering comprehensive solutions and unmatched service to our commercial customers, earning a reputation as a trusted contractor in the industry. Perks of working at ColonialWebb: • Competitive salary, • Opportunities for career growth, training, and development, • 401(k) plan with a generous company match, • Personal leave, paid holidays, bereavement leave, • Excellent Medical, dental, vision, and Rx drug insurance, • Phone allowance / company phone, • Car allowance and fuel card, • Tuition reimbursement, • Employee referral incentives, • Scholarship program for employees’ children, • Maintain strict adherence to all company safety rules, regulations, procedures and practices, • Share the “Courage to Care” message with teammates and serve as a positive example of safety, • Study/develop schedules and estimate worker-hour requirements for completion of job, • Work with Supply Chain Manager to procure materials, equipment and subcontracts, • Review/author RFIs and review responses to determine scope of impact, • Provide information project team to promote design, fabrication and ensure project execution, • Interpret project specifications and make decisions relating to equipment, materials and subcontractors, • Assist project Superintendents with daily operations and supervise Assistant Project Managers/Project Managers/Project Engineers, • Ensure that regular and timely project meetings are occurring as needed for successful job completion, • Responsible for owning project forecasts for revenue, cost-to-complete and expected gross profit, • Assume primary responsibility for redemption of equipment, material, and subcontractor estimates; assume secondary responsibility for labor and other costs, • Act as liaison with Virtual Construction Department, including, but not limited to:, • Provide required detailing information, • Work to resolve conflicts, • Discuss ideas to increase project profitability, • Plan and coordinate the requirements of projects with the General Superintendent/Superintendent You should have: • A minimum of five years of commercial/industrial project management experience, • Experience of hands-on management of projects with a scope of work exceeding $10m, • Ability to manage continuous flow of material and labor for large projects lasting a year or more, • Mechanical and/or plumbing trade knowledge, • OSHA 30-hour certification and knowledge of OSHA safety regulations, • Ability to read and understand project related documents in the English language, • Ability to use current technology (i.e., laptop computer, tablet, smartphone, Microsoft Teams), • Ability to deal diplomatically and effectively with internal and external customers, • Ability to demonstrate foresight and problem-solving skills to make decisions based on information at hand, • Ability to demonstrate a positive attitude and willing to work in a team environment, • Ability to coordinate and perform multiple activities in a timely manner, • Ability to maintain a sense of urgency and remain calm when handling emergencies Apply online: . EOE M/F/Disability/Vets Company DescriptionColonialWebb is the regional leader of superior installation, maintenance, and service of building mechanical and electrical systems.ColonialWebb is the regional leader of superior installation, maintenance, and service of building mechanical and electrical systems.

Job Description Overview Want to Join the Best in Pest? Go Pro with Orkin. As an Orkin Pro, you’ll be the professional delivering on the promise of a safe place to live, work, and play behind pest control’s best-known brand. Be part of a purpose-driven team with a reputation built on almost 125 years of a service-minded approach to providing peace of mind where people value it most: their home. It’s more than a job—it’s a career with growth potential and benefits that go beyond the basics. And with Orkin’s award-winning training program, we’ll give you all the tools and technology you need to succeed. That means no industry experience required to start and build a career as an Orkin expert. Plus, if there’s one thing we know at Orkin, it’s that pests keep coming back, and that makes our industry recession-resistant. You can count on a career with the Best in Pests where you’ll work alongside a team that values safety, professionalism, empathy, integrity and innovation in pursuit of our mission to deliver the peace of mind only an Orkin Pro can provide. Responsibilities The Orkin Pro commits to safely and professionally providing the highest level of protection and service to their customers on a designated service route. Their career starts with in-depth, award-winning training that prepares them with the skills needed to succeed in the responsibility of daily route operations, scheduling, issue diagnosis and treatment planning. With each customer, Orkin Pros work to understand problems and do the right thing to resolve them. You will... • Complete our award-winning training to learn the skills and knowledge required to serve our customers, • Prioritize safety in all responsibilities, • Follow a route schedule and daily operation schedule within an assigned territory and ensure timely and safe arrival at each customer’s location, • Operate a company vehicle safely and ensure cleanliness of the vehicle and equipment, • Conduct yourself with the utmost professionalism and integrity with customers and coworkers, • Serve as a problem solver for each customer with empathy by listening to and understanding their needs and utilizing Orkin Pro expertise to recommend the most efficient and innovative solution, • Meet with customers in their businesses or homes to explain actions taken, ensure satisfaction, and discuss additional services that would give them peace of mind about their pest management, • Inspect the interior and exterior of the customer’s property—don’t worry, we teach you how!, • Communicate with customers to explain actions taken, ensure satisfaction, and discuss additional services that would give them peace of mind about their pest management program, • Competitive earnings starting at $18.00 to $22.00 per hour, including a company vehicle with gas card upon route assignment, • Extensive paid training up front and on an ongoing basis to support continuous improvement; no prior pest control experience is required, • Career opportunities to grow and advance in the company and improve compensation, • Competitive pay with commission opportunity, • Company vehicle and gas card, • Comprehensive benefits package including medical, dental, vision & life insurance, • 401(k) plan with company match, employee stock purchase program, • Paid vacation, holidays and sick leave, • You are interested in an opportunity with career potential in a reliable, recession-resistant industry, • You have a service-oriented mindset that leads you to build loyalty and trust with customers, • You hold yourself responsible to commitments, • You value being part of a team, • You want to keep learning, improving and developing as a leader, • You want to join a company that supports the community, • You want a career with a purpose at a mission-driven company that values, • Safety, • Professionalism, • Empathy, • Integrity, • Innovation Qualifications Minimum Requirements: • No Experience Required – we’ll train you to be a Pro!, • High School Diploma or equivalent required, • Valid driver’s license required, • Ability to obtain the appropriate pesticide license within the first 90 days of employment (company paid) Candidates must meet physical job requirements and safely perform the job duties with or without accommodations: • Safely use a ladder within the manufacturer's weight capacity, • Occasionally lift and carry up to 50 lbs., • Safely access crawl spaces, attics, confined spaces, roof tops, etc. including the ability to climb or balance and stoop, kneel, crouch, or crawl., • Wear personal protective equipment (PPE) which sometimes requires an OSHA-compliant respirator, • Willing to work in different types of weather conditions Orkin is an Equal Opportunity/Protected Veterans/Individuals with Disabilities Employer

Job DescriptionYou’ve Never Been Satisfied with “Good Enough.”You want to make an impact, not just manage projects, but change how the world gets built. At Accenture Infrastructure & Capital Projects, you’ll do exactly that. You’ll help develop and deliver the factories, grids, transit systems, and public infrastructure that keep communities moving - and do it smarter, safer, and more sustainably than ever before. You’ll work alongside people who think big and act bold - project managers, engineers, technologists, and strategists who blend real-world experience with digital innovation and AI. Together, we’re transforming how capital projects are planned, managed, and executed, creating a better way to build for the future. Because “good enough” builds the past. You’re here to build what’s next, on a team that outperforms every norm. Visit us here to learn more about Accenture Infrastructure & Capital Projects THE WORK: • You'll develop, review, and manage project-specific EHS Plans aligned with the Global Construction Safety Policy and OSHA regulations., • You'll oversee prevention strategies and controls for high-risk activities (e.g., working at heights, electrical work, confined space)., • You'll ensure risk assessments (including HRAs) are conducted at all levels and integrated into schedules and planning., • You'll conduct regular safety inspections, audits, and oversee HRA controls, documenting findings and corrective actions., • You'll investigate and report all incidents, injuries, and near-misses, ensuring root cause analysis and corrective action., • You'll lead weekly safety meetings, participate in safety committees, and foster a positive safety culture through collaboration., • You'll prepare and submit monthly safety management reports (incident summaries, audit results, improvement initiatives)., • You'll coordinate with contractors, subcontractors, and the Owner to clarify policies, verify compliance, and participate in meetings and job walks., • You'll deliver safety orientation and ensure effective training communication for a diverse workforce, maintaining all training records., • You'll certify and sign off on the project-specific EHS Plan's compliance alongside the Contractor Site Manager and Construction Manager., • Onsite at client site: The work location for this role is onsite with our clients and partners to enable delivery and cultivate our client relationships., • With all our roles, there is some in-person time for collaboration, learning and building relationships with clients, peers, leaders and communities. As an employer, we will be as flexible as possible to support your specific work/life needs.HERE’S WHAT YOU’LL NEED:, • Bachelor's degree in occupational health and safety, construction management, or engineering, • 10+ years of experience in construction/safety management, preferably within a data center or mission critical facilities, • 3+ years of senior level safety management or design management experience, • In-depth knowledge of EPA standards (OSHA plus) .BONUS POINTS IF YOU HAVE:, • Foundational understanding of emergency action and crisis management plans for the project, • An understanding of conducting regular drills and ensure all personnel are familiar with emergency procedures, • Familiarity overseeing implementation of standards for access control, barricades, fire prevention, ergonomics, housekeeping, sanitation, PPE, and substance abuse

Job Description Directional Drill Foreman Location: 12 states across the Midwest, Southeast, Central, and Southwestern United States Company Overview We are a leading provider of utility construction and infrastructure solutions, specializing in transmission, distribution, substation, and renewable energy projects. Our team is committed to delivering high-quality services while maintaining the highest safety and performance standards. Job Description We are seeking an experienced Directional Drill Foreman to oversee directional drilling operations in the Southeastern and Mid-Atlantic. This role involves managing on-site activities, coordinating with crew members, ensuring project timelines are met, and upholding strict safety and compliance standards. Key Responsibilities: • Supervise and lead a directional drilling crew in the installation of underground utilities, • Operate and maintain directional drilling equipment efficiently and safely, • Coordinate with project managers, inspectors, and other stakeholders to ensure successful project completion, • Enforce job site safety protocols and ensure compliance with industry regulations, • Troubleshoot issues as they arise and implement effective solutions, • Proven experience in directional drilling operations within the utility construction industry, • Strong knowledge of underground utility installation processes, • Ability to lead and motivate a team in a fast-paced outdoor work environment, • Excellent problem-solving and decision-making skills, • Effective communication and interpersonal skills, • CDL license (preferred)

Job Description At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Your Impact: Pearce/Unified is seeking a Critical Power Field Technician (UPS Field Engineer) for Richmond, Virginia, and the surrounding areas, with a commitment to excellence and a strong desire to succeed and develop new skills. As a Critical Power Technician, you will directly support our customers in the onsite preventive, corrective, and restorative maintenance of their critical power systems (i.e., UPS, DC systems, inverters, PDUs, STS, and standalone reserve battery technologies). As a Senior UPS Field Service Engineer for Unified Power, you will possess and utilize the 'hit-the-ground-running' and 'think-outside-the-box' mentalities that drive swift and superb solutions to address our customers' needs. Core Responsibilities: • Install electrical equipment such as small rack-mounted UPS equipment, various-sized batteries, and UPS/Battery monitoring equipment., • Maintain Battery Cabinets and racks, Maintenance Bypass, Battery Monitoring Equipment, DC Systems, and other electrical equipment., • Periodic and lifecycle-driven performance of remedial services, including failure analysis and troubleshooting, component replacements and repairs, and battery string replacements and installations., • Customer relationship building – Provide excellent customer service and upsell products., • Field troubleshooting calls from customers to a satisfactory resolution., • Quickly respond to critical situations., • Teach and mentor crew members on proper techniques for site work, troubleshooting, repair, and analyzing site data., • Isolate basic hardware, software, and interface malfunctions utilizing various test equipment on multiple products and technologies. ATTN: Only applicants with the following experience will be considered. Please ensure your resume clearly details your UPS work experience before applying. • Prior military training in electronics or avionics (A School, AIT, etc.) preferred, • Minimum of three (3) years serving in a third-party critical power field service or technical support role with a demonstrated progression in technical proficiency and capability -OR-, • Minimum of five (5) years serving in an OEM service environment in the critical power space, • Good understanding of AC/DC electrical principles., • Knowledge of test equipment operation, such as multi-meters, and battery test equipment, • Read and interpret electronics schematics with the ability to troubleshoot failures/faults to the component level., • Understand and have experience enforcing compliance with FCC/FAA/EPA/OSHA regulations and standards., • Outstanding work ethic, punctuality, trustworthiness, and reliability – you will set the pace as a senior UPS/ Critical Power Engineer., • At Pearce, safety is our number one concern. Candidates must be able to comply with OSHA and applicable DOT Standards., • Must have a valid driver's license with an acceptable driving record (if driving a Company Vehicle) and pass a pre-employment drug screen., • Ability to lift and/or move up to 100 pounds for short durations., • Ability to kneel or crouch periodically., • Ability to stand for extended periods of time., • Ability to travel for multiple days with Per Diem as projects require., • Coordinate multiple tasks simultaneously while maintaining 100% safety awareness. Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive benefits (medical, dental, vision, life insurance), PTO, Paid Holidays, and a company-matching 401(k) Retirement, Life Insurance. Also provided are a company vehicle, phone, laptop, or tablet (as required for your role), and all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact. We provide a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about our corporate and telecom division at and our renewables division at . #ZR At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$35—$45 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at !

Job Description Job Overview: The HSE Safety Inspector is a field-based safety oversight position responsible for providing active health, safety, and environmental leadership across multiple industrial and construction environments, including refineries, pulp and paper facilities, and heavy industrial projects. This role focuses on high-risk work activities, including excavation and trenching, rigging and material handling, confined space entry, and critical lift planning and execution. The HSE Safety Inspector conducts in-depth jobsite inspections, risk assessments and audits, develops task-specific safety plans, and works directly with operations, supervision, and craft personnel to ensure work is performed safely and in compliance with regulatory and company requirements. This position plays a key role in hazard identification, job planning, and safety coaching, while reinforcing a strong Stop Work Authority and proactive safety culture. Essential Functions and Responsibilities: • Provide field safety oversight for high-risk activities including:, • Excavation and trenching, • Rigging and material handling, • Confined space entry, • Crane and critical lift operations, • Conduct routine and task-specific jobsite safety inspections and audits to identify hazards and verify compliance, • Review, develop, and approve JSAs, confined space plans, excavation plans, and critical lift plans prior to execution, • Collaborate with cross-functional teams to develop and deliver HSE training programs and awareness campaigns., • Monitor the implementation of corrective actions and verify their effectiveness., • Verify proper implementation of engineering controls, PPE, and safe work practices, • Support operations during work execution by providing real-time coaching and intervention when unsafe conditions or behaviors are observed, • Exercise and reinforce Stop Work Authority when conditions pose an imminent risk, • Investigate incidents, near misses, and safety observations to determine root causes and recommend corrective actions, • Deliver safety awareness training and field-based coaching, including:, • JSAs and job planning, • Behavior-Based Observations (BBOs), • Stop Work expectations, • Rigging/material handling, • Track corrective actions to closure and verify effectiveness, • Serve as a safety liaison between field operations, management, and clients, • Maintain current knowledge of OSHA regulations, industry standards, and client-specific safety requirements Minimum Qualifications • High school diploma or equivalent required; associate or bachelor’s degree in Occupational safety & health, Environmental Science, Construction Management, or related field preferred, • Minimum 5-10 years of field-based HSE experience supporting industrial construction, maintenance, or heavy civil operations, • Strong working knowledge of OSHA regulations, including:, • Excavation and trenching (29 CFR 1926 Subpart P), • Cranes, rigging, and lifting operations, • Confined space (construction and general industry), • Demonstrated experience performing jobsite safety inspections, hazard assessments, and work-site audits, • Ability to read and interpret lift plans, excavation designs, confined space permits, and JSAs, • Excellent verbal and written communication skills with the ability to engage field personnel at all levels, • Must have a competent/qualified persons certification on:, • Excavations/trench safety, • Department of transportation (Highway and ROW), • Confined space supervisor Preferred Qualifications • Safety certifications such as CSP, CHST, ASP, COSM or equivalent, • Experience supporting ROW, refinery, pulp and paper, petrochemical, or energy industry operations, • Hands-on experience developing:, • Confined Space Entry plans and permits, • Critical Lift Plans, • Excavation and trenching safety plans, • Experience delivering safety awareness training, toolbox talks, and job briefings, • Proficiency with safety reporting, inspection, and corrective action tracking systems, • Frequent walking, including on uneven surfaces, • Climbing of stairs and ladders, • Moderate stress due to regular deadlines and daily challenges, • Ability to lift up to 50 lbs., • Work in inclement weather, including hot and cold extremes, • Daily driving for up to 8 hours as necessary

Job Description At ACI we build our company and our culture not by counting people, but by making our people count! $0.00 COST FOR MEDICAL, DENTAL, SHORT TERM DISABILITY & LIFE INSURANCE (EMPLOYEE ONLY) COVERAGE! Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years. Benefits: • Medical Insurance Plan ($0.00 Employee-Only), • Dental Insurance Plan ($0.00 Employee-Only), • Short-Term Disability Plan ($0.00 Employee-Only), • Life Insurance Plan ($0.00 Employee-Only), • Vision Insurance Plan, • 401(K) Retirement Plan with Generous Company Matching, • Health Savings Plan with Generous Company Matching Summary/Objective: The Receiving and Inventory Control Specialist supports all incoming deliveries to our manufacturing facility including staging and maintaining accurate material counts. At times, it can be a fast-paced position and is a hands-on construction/manufacturing environment indoors and outdoors Essential Functions: • Safety planning and adherence to all OSHA, VOSHA, and ACI safety standards, • Operates lifting equipment necessary for unloading/loading and transferring materials including breaking down pallets, crates, bales, and other containers, • Receive and check in construction materials while verifying inbound goods against purchase orders, packing slips, and shipping documentation, • Records all inventory transactions using company computer systems for inventory tracking, • Perform quality control checks on incoming materials; identify damage, discrepancies, or shortages, • Mark materials with correct identifying labels, barcodes, or tags and distribute them to designated locations as needed, • Move inventory from receiving to appropriate storage or staging areas, • Maintain up-to-date knowledge of product locations within the drop yard, • Conduct regular cycle counts, full physical inventories, and reconciliation of variances., • Assist in cross-functional warehouse duties as needed (shipping, light assembly, paint touch up), • Maintain a clean, safe, and organized work area following, • Adhere to company standards, and safety procedures Supervisory Responsibility: No Required: • 3+ years of experience with any combination of the following: inventory managing, material managing, and/or material staging in the construction industry, • Certified forklift operator with experience on other equipment such as pallet jacks, hand trucks, and lulls. (Plus+ for overhead cranes, multidirectional lifts, and straddle carriers), • Able to work aloft, climb, bend, pull, reach overhead, stand/walk for long periods of time and lift up to 50 lbs., • Frequently is requires the use of hands and fingers to handle or feel objects, tools or controls; and reach with hands and arms, • Able to frequently work outdoors year round, • Must be able to correctly identify all colors of a color-coded cable/wires and see close vision, distance vision, depth perception, peripheral vision and ability to adjust focus, • Proficient in general computer equipment and Microsoft office products, • Ability read and write in English. Spanish is a plus, • Excellent math and geometry skills, • Possess a willingness to grow with the job and teambuilding, • Must be willing to work overtime as needed; significant overtime may be required during busy periods, • Must adhere to company policies and procedures, • Must be available to work assigned schedules, • Willing to make site visits to perform field verification as required The work environment and physical demands required would be representative of those that must be met by an employee to successfully perform the essential functions of this job, and may include, but are not limited to the following: Work Environment: • May work in varying temperatures; both inside and outside, including inclement weather, heat, humidity, cold, and dampness, • May work in areas with exposure to moderate/high noise levels, • May be exposed to fumes or airborne particles including dust, • May be required to work in confined spaces or from high heights Physical Demands: • This role routinely uses construction equipment such as heavy machinery, hand and power tools, • While performing duties of the job the employee may work aloft, climb, bend, pull, reach overhead, stand/walk for long periods of time and lift up to 50 lbs, • Frequently is required to use hands to finger, handle or feel objects, tools or controls; and reach with hands and arms, • Must be able to correctly identify all colors of a color-coded cable/wires and see close vision, distance vision, depth perception, peripheral vision and ability to adjust focus Travel: • Prior military experience, • Experience with Structural steel detailing using SDS/2 or (Tekla – preferred), • HS diploma or GED equivalent, • The Steel Detailer should be fluent with computer use and software navigation, • Able to use Microsoft office Visit us at for more information! Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. An Equal Opportunity/Affirmative Action Employer Receiving and Inventory Control Specialist

Job DescriptionJob Description: Travel Advanced Practice Provider (NP/PA) Monogram Health is looking for skilled Nurse Practitioners and Physician Assistants eager for the opportunity to make a difference in patients' lives. The Advanced Practitioner at Monogram Health is a key member of an integrated Care Team which includes a Registered Nurse and a Social Worker. The patients we serve often struggle with multiple serious diseases. Monogram Health is a leading multispecialty provider of in-home, evidence-based care and benefit management services for the most complex of patients who have multiple chronic conditions Your Impact As a Travel APP, you will be responsible for the delivery of personalized and compassionate care to patients primarily with CKD through ESRD. This specific position will travel throughout the respective geography, connecting with patients and delivering high impact clinical care. Primary duties include patient health assessment, creating strategies to improve or manage a patient's health, and introducing habits for health promotion. In part of completing this care for patients, your responsibilities will include maintaining accurate patient records, scheduling, and administering follow-up appointments to patients. The position will roughly 4 days a week driving to patient homes, and 1 day working telehealth from the APPs home. Responsibilities • Ability to travel out of town for up to 75% of the month during the work week, • Travels statewide to conduct in-home assessments, which include comprehensive annual wellness exams, focused screenings, or other visits both in the patients' home and in the virtual environment, • Counsels and educates patients and families about benefits and programs available to help them live healthier lives, • Documents items such as: appropriate chief complaint, all applicable diagnosis, past medical, family, and social history, review of systems, examinations, medications, allergies, assessment, and plan, • Responsible for the coordination of care with primary care providers, specialists, and appropriate ancillary services, • Completes all documentation and paperwork in a timely manner, • Maintains quality of care standards as defined by the practice, • This position will not be office-based but will be based in state in which employed and will need to attend periodic training/meetings outside of that state, • Deliver evidence-based, timely care in a manner that reduces avoidable hospitalizations, maximizes quality of life, and puts patient health and satisfaction first, • Prescribe medications, order tests, and collaborate with patient’s Monogram physician, • Perform effectively, as reflected by improved patient quality outcomes, which will be measured and reported daily, • Facilitates closing gaps in care by educating patients about preventive monitoring and working with physician practices to schedule diagnostic testing, • Assists patients with enrolling to access educational videos, • Participates in the integrated care team meetings, • Knowledge of disease diagnosis and prevention, • Make assessment of patient's health status, • Implement a plan consistent with appropriate plan of care, • Follow-up and evaluate patient's status, • Other duties as assignedPosition Requirements, • Active and unrestricted Registered Nurse and Nurse Practitioner, • Board certified for appropriate licensure (NP: ANCC/AANP), • Current and unrestricted DEA certificate, or eligibility, • Ability to travel extensively across the state to reach difficult to reach patients in their home, • Ability to work without direct supervision and practice autonomously, • Access to transportation, a valid driver's license, and car insurance, • Must be proficient with medical instruments and equipment required by the work, • Knowledge of computer-based data management programs and information systems, as well as medical records and point-of-interview technology, • Ability to communicate effectively in verbal and written form with retail and medical partners at various levels, patients, family members, physicians and representatives of the community, • Sound understanding of all federal and state regulations including HIPAA and OSHA, • 2 or more years of direct patient care requiredBenefits, • Comprehensive Benefits - Medical, dental, and vision insurance, employee assistance program, employer-paid and voluntary life insurance, disability insurance, plus health and flexible spending accounts, • Financial & Retirement Support – Competitive compensation, 401k with employer match, and financial wellness resources, • Time Off & Leave – Paid holidays, flexible vacation time/PSSL, and paid parental leave Monogram Health employs a robust clinical team, leveraging specialists across multiple disciplines including nephrology, cardiology, endocrinology, pulmonology, behavioral health, and palliative care to diagnose and treat health issues; review and prescribe medication; provide guidance, education, and counselling on a patient’s healthcare options; as well as assist with daily needs such as access to food, eating healthy, transportation, financial assistance, and more. Monogram Health is available 24 hours a day, 7 days a week, and on holidays, to support and treat patients in their home. Monogram Health’s personalized and innovative treatment model is proven to dramatically improve patient outcomes and quality of life while reducing medical costs across the health care continuum.

Job DescriptionSalary: 18 - $22.00 per hour As a Technician at Mosquito & Pest Authority, you will use proven products and techniques on both commercial and residential properties. Our Treatment Specialists provide expert mosquito control services in a friendly, respectful, and efficient manner. If youre dedicated to impeccable client service and enjoy physical work, this is a great opportunity for you! The best part?Theres no experience needed! You will be provided with expert PAID training when you join our team. Essential Duties and Responsibilities: • Participate fully in training opportunities provided to enhance knowledge and to meet requirements for licensing., • Work in a safe manner in accordance with state requirements, OSHA policies, and procedures, and maintaining and utilizing the required safety equipment when performing duties., • Operate a backpack blower (up to 60 pounds) in heat and humidity, often through uneven terrain., • Responds to basic customer inquiries and requests and notifies the office of complaints or issues to ensure timely resolution., • Complete job documentation accurately and in a timely manner., • Work a flexible schedule as required to meet weekly responsibilities, including occasional weekend hours., • Maintain a clean company vehicle and operate a vehicle safely, • Drive company vehicle to client sites to provide services in a professional, safe and friendly manner. Knowledge, Skills, and Abilities Required: • High School graduate / GED, • Valid Drivers license with excellent driving record, • Basic mosquito and/or pest control knowledge preferred, but not required, • The job requires standing, walking, moving, climbing, carrying, bending, kneeling, reaching, handling, pushing, and pulling, • Must be able to carry a 60lb Backpack Fogger, • Must be available to work extended hours and weekends when necessary Additional Requirements: • Must have a valid Driver's License, • Willingness to undergo a background check Benefits: • Paid Training, • Competitive Compensation, • Additional Performance-Based Compensation Opportunities Available, • Family Oriented Work Environment, • Fun Atmosphere About Us: At Mosquito Authority, we do things a little differently than your average pest control company. Our customers count on us for complete mosquito protection, and we dont take that lightly. Our mission is simple:help protect families from mosquitoes and the diseases they carry. Each and every one of our team members is dedicated to providing the best services out there so our customers can enjoy the outdoors with peace of mind. How do we do that? With ourNo Mosquito Guarantee.Our passionate and respectful team members strive to ensure no customer is bothered by mosquitoes in between treatments, because thats our promise.

Job DescriptionSalary: $18-22 Per Hour COMPANY VEHICLE + PAID TRAINING As a Technician at Mosquito & Pest Authority, you will use proven products and techniques on both commercial and residential properties. Our Treatment Specialists provide expert mosquito control and pest control services in a friendly, respectful, and efficient manner. If youre dedicated to impeccable client service and enjoy physical work, this is a great opportunity for you! The best part? Theres no experience needed! You will be provided with expert PAID training when you join our team. Essential Duties and Responsibilities: • Participate fully in training opportunities provided to enhance knowledge and to meet requirements for licensing., • Work in a safe manner in accordance with state requirements, OSHA policies, and procedures, and maintaining and utilizing the required safety equipment when performing duties., • Operate a backpack blower (up to 60 pounds) in heat and humidity, often through uneven terrain., • Responds to basic customer inquiries and requests and notifies the office of complaints or issues to ensure timely resolution., • Complete job documentation accurately and in a timely manner., • Work a flexible schedule as required to meet weekly responsibilities, including occasional weekend hours., • Maintain a clean company vehicle and operate a vehicle safely, • Drive company vehicle to client sites to provide services in a professional, safe and friendly manner. Knowledge, Skills, and Abilities Required: • High School graduate / GED, • Valid Drivers license with excellent driving record, • Basic mosquito and/or pest control knowledge preferred, but not required, • The job requires standing, walking, moving, climbing, carrying, bending, kneeling, reaching, handling, pushing, climbing on ladders and pulling, • Must be able to carry a 60lb Backpack Fogger, • Must be available to work extended hours and weekends when necessary Additional Requirements: • Must have a valid Driver's License, • Willingness to undergo a background check Benefits: • Paid Training, • Company Vehicle, • Competitive Compensation, • Additional Performance-Based Compensation Opportunities Available, • Fun Atmosphere

Job Description THIS POSITION IS LOCATED IN SOUTH HILL VIRGINIA About the Role: The Concrete Pump Operator plays a critical role in the successful execution of construction projects and other heavy infrastructure projects by operating concrete pumping equipment safely and efficiently. This position requires the operator to manage the setup, operation, and maintenance of concrete pumps to ensure continuous and precise delivery of concrete to designated locations on-site. The operator must adhere strictly to Department of Transportation (DOT) regulations and safety protocols to maintain a secure working environment for all personnel. Additionally, the role involves coordinating with rigging teams and other heavy equipment operators to optimize workflow and project timelines. Ultimately, the Concrete Pump Operator ensures that concrete placement is performed accurately, on schedule, and in compliance with all safety and quality standards at the South Hill, VA Plant location. Minimum Qualifications: • Valid Commercial Driver's License (CDL) Class A., • Proven experience operating concrete pumps and heavy equipment in road construction or similar environments., • Strong knowledge of DOT regulations and safety inspection procedures., • Ability to perform rigging tasks and understand heavy equipment operation., • Certification in concrete pump operation or related heavy equipment operation., • Experience working in a plant environment similar to South Hill, VA., • Additional safety training certifications such as OSHA 10 or 30-hour construction safety., • Familiarity with diesel truck maintenance and troubleshooting., • Operate and control concrete pumping equipment during construction and other heavy construction projects., • Perform daily safety inspections and routine maintenance on pumps, brakes, and diesel trucks to ensure equipment reliability and compliance with safety standards., • Coordinate with rigging crews and other heavy equipment operators to position pumps and hoses effectively for optimal concrete delivery., • Comply with all DOT regulations and company safety policies to maintain a safe work environment. The required skills such as construction knowledge, rigging, and heavy equipment operation are essential for safely and efficiently managing concrete pump operations on-site. Mastery of DOT regulations ensures compliance with legal and safety standards, reducing risk and enhancing project reliability. Proficiency with pumps, brakes, and diesel trucks allows the operator to conduct thorough safety inspections and perform necessary maintenance, minimizing downtime. The Commercial Driver's License (CDL) Class A enables the operator to transport heavy equipment to and from job sites as needed. Preferred skills like additional certifications and experience in plant environments further enhance the operator's ability to troubleshoot issues, collaborate with team members, and contribute to a safe and productive work atmosphere.

Job Description Backbone Construction LLC was founded in 2022 with a clear vision: to become a national leader in the telecom and utility construction industry. Our commitment to excellence has driven us to expand our capabilities and assemble a strong team of experts dedicated to delivering top-notch service. We have successfully completed hundreds of projects that have significantly contributed to shaping the infrastructure landscape across the nation. At Backbone Construction, we believe in resilience, adaptability, and continuous growth, which reflects our ethos and mission. We are currently seeking a motivated and skilled CDL Driver & Laborer to join our team. This dual-role position is essential for our construction operations, requiring a combination of driving expertise and hands-on labor skills. The ideal candidate will be instrumental in supporting our projects by ensuring safe transportation of materials, operating various machinery, and assisting with on-site construction tasks. Position Overview We are seeking an experienced Drill Operator to join our Virginia market team. The ideal candidate has hands-on experience with horizontal directional drilling (HDD), operating equipment safely and efficiently, and supporting underground fiber and utility construction. This role requires strong field awareness, the ability to read and interpret plans, and a commitment to safety, communication, and teamwork. You will work closely with drill locators, laborers, and project managers to ensure that work is completed accurately and on schedule. Requirements Key Responsibilities • Operate HDD drills and support equipment (Vermeer, Ditch Witch, or equivalent)., • Work closely with the locator to determine drill paths, depths, and bore plans., • Perform daily equipment inspections and basic maintenance., • Install conduit, fiber, and other underground utilities per project specifications., • Read prints, alignments, and utility maps to ensure safe and accurate bore paths., • Understand 811 locate marks, utility conflicts, potholing requirements, and safe digging practices., • Ensure compliance with OSHA, local regulations, and customer standards., • Complete production sheets, documentation, and jobsite photos as required., • Maintain a safe, clean, and organized jobsite., • Travel within the Virginia region depending on project needs. Qualifications • 1–3+ years of HDD drilling experience (preferred)., • Strong understanding of bore planning, drill fluids, and HDD best practices., • Ability to read maps, prints, and utility markings., • Commitment to safety and quality work., • Ability to work outdoors in all weather conditions., • Valid driver’s license required., • Competitive salary based on experience, • Bonus directly correlated to project and company financial performance, • Paid employee health insurance plan (including dental and vision), • Paid time off and holidays

Job DescriptionRange Commercial Partners, Inc. is hiring a Building Maintenance Engineer in Richmond, VA! Range Commercial Partners was founded by seasoned experts in sales, leasing, property management, and development, who united around common goals and principles. Independently owned, we operate with open minds, no geographic constraints, and unwavering commitment to success for our clients and our firm. Driven, generous, and mindful of balance, we’re forming teams that are built to make a difference! What you will be doing: • Inspect building systems including fire alarms, HVAC, electrical, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client at assigned properties., • Performs day to day repairs, emergency maintenance, and preventive maintenance on all assigned properties or accounts including daily housekeeping chores., • Assists with troubleshooting and repairs of buildings and installed systems to include: plumbing systems, kitchen equipment, roofs, drains, shop, and HVAC., • Receives and completes work orders for corrective repair work on a variety of building physical structures, equipment, and system components in a timely manner as assigned., • Oversees and inspects the work performed by outside contractors., • Maintains lighting systems throughout the facility, cleaning fixtures and replacing bulbs and lamps., • Orders necessary materials in order to complete all required repairs, within limits set by the Property Manager., • Completes all required paperwork within established deadlines to close out work orders., • Maintains and renews any required trade certifications and licenses., • Periodically, meets with the assigned Property Manager to ensure that all aspects of required or requested maintenance work are achieving the goals and objectives established to maintain the property., • Ensures that requests for work that exceed routine day to day repairs or maintenance, is properly referred and routed to the Chief Engineer for review., • Is responsible for 24/7 vehicle readiness as a part of the maintenance position., • Promptly reports unusual events or conditions discovered on assigned properties to the Property Manager and the Maintenance Supervisor., • Performs work in accordance with all Federal and State OSHA guidelines and requirements., • Physical requirements include stooping, standing, walking, climbing stairs/ ladders, and ability to lift/carry heavy loads of 50 lbs. or more.What you will bring along:, • High school education., • Advanced knowledge of plumbing, electrical, mechanical, roofing, drywall, carpentry, and HVAC troubleshooting., • Excellent written and verbal communication skills., • Strong organizational and analytical skills., • Ability to provide efficient, timely, reliable and courteous service to customers, with the ability to present information., • Requires knowledge of financial terms and principles to understand operating budgets., • Ability to comprehend, analyze and interpret documents., • Ability to solve problems involving several options in situations that require intermediate analytical and quantitative skills., • Uses computer and phone for work order system, email, and training. Basic skills with Microsoft Office Outlook., • Decisions made with thorough knowledge of procedures and company policies to achieve set results and deadlines. Responsible for setting own project deadlines., • Must always use professional judgement and decisions made with thorough understanding of procedures, company policies, and business practices to achieve general results and deadlines., • Ability to work in a fast-paced environment and will need to be able to adapt to shift priorities efficiently and effectively., • Excellent collaboration and written and verbal communication skills required to effectively communicate with diverse populations are essential., • Embrace the Range Commercial Partners values:, • Service, • Excellence, • Respect, • Versatility, • Integrity, • Curiosity, • EfficiencyThe Perks:, • Health coverage for you and your family through medical, dental and vision plans., • Financial protection through disability, life, and accidental death and dismemberment., • A 401(k) plan in which the company matches dollar for dollar on a generous % you contribute., • A generous paid time off program in which the benefits increase along with your tenure with the company. 5Za624eEFZ