Quality engineer jobs in Cambridge - Page 3Create job alerts

Quality Engineer, Compliance Location: Cambridge, UK (Hybrid 2.5 days per week onsite) About the Role Join the Biotherapeutics Pharmaceutical R&D Devices Centre of Excellence, where youll play a key role in ensuring quality and compliance for medical devices and combination products throughout their lifecycle. This position focuses on design control and risk management, supporting development programs from early design through to commercial launch. Youll work closely with cross-functional teams and external partners to maintain the highest standards of quality and regulatory compliance. Key Responsibilities • Lead design control and risk management activities for combination product development, ensuring all deliverables are accurate, approved, and audit ready., • Facilitate risk management processes with external design and manufacturing partners., • Ensure compliance with internal and external quality and regulatory standards (ISO 13485, ISO 14971, 21 CFR 820, EU MDR)., • Provide input into design validation activities, including Human Factors Engineering assessments.

A great opportunity to join an established and expanding air conditioning and refrigeration contractor who pride themselves on the quality service they provide their clients. Due to expansion they are recruiting for a refrigeration and air conditioning engineer, you will be:-. Providing service, mai

Join a world-renowned aerospace and defence organisation as a Senior Engineer Outfit in Glasgow on a hybrid basis If you are considering sending an application, make sure to hit the apply button below after reading through the entire description. Would you like to join a global aerospace and defence organisation? Do you want to work as part of an organisation protecting people and maintaining maximum national security? Due to a drive for greater success, this advanced manufacturing business is currently searching for a Senior Engineer Outfit to add to their talented, hardworking team in Glasgow on an initial 6 month contract. Striving for innovation and creativity you can ensure no two days will be the same. This role will be offering £42.08 Umbrella per hour inside IR35 The role Undertake a defined range of Wholeship - Integration activities including Outfit systems, compartment design and integration activities in line with all relevant processes and quality requirements. Supplying advice and support to internal and external customers ensuring defined objectives are achieved whilst continually maintaining quality and service requirements. Outfit includes the design or operation of: • Deck coverings, Coatings, Insulation & Linings, • Accommodation and Wet Spaces, • Medical, • Ship's Access & Escape (i.e. doors, hatches, ladders. etc.), • Evacuation & Lifesaving, • Removal routes, • Produce Layout Drawings for Outfit compartments for review by stakeholders and to allow Stage 2 to correctly model these spaces., • Update Windchill PLM with mature parts, systems, occurrences and compartment data to ensure it correctly presents the baseline design. Knowledge and Qualifications: • Working towards the requirements for registration as Incorporated Engineer or Chartered Engineer with the Engineering Council, • Good experience in engineering or a defence related industry., • Possesses good knowledge of all aspects within current discipline, • Able to perform analysis using recognised analytical tools and to make sound judgements This is an exciting opportunity to work for a global business that has developed a strategy of working closely with its contingent workforce. xrnqpay Within the role, you can expect to: Work on complex, cutting-edge projects Achieve a work/life balance Develop your skills APPLY NOW If this sounds like the role for you, we'd love to hear from you! Send your CV to Stella today!

About BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. Do you have the following skills, experience and drive to succeed in this role Find out below. We strive to create an environment where everybody feels welcome and valued.Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. Building a sustainable tomorrow BAM Infrastructure are looking to recruit an experienced and motivated Estimator/Senior Estimator to join our team. You will play a key part in the preconstruction phase of large civil engineering projects which will provide critical infrastructure to enable future, renewable developments across Scotland. This role can be based in either of our area offices located in Kilsyth or Inverness, Scotland. Making Possible • Co-ordinate with bid teams, colleagues in the estimating department and in the wider Pre-construction team, • Give direction to estimating administrative staff, • Manage and deliver cost estimates at various stages in scheme development, scope definition and design maturity to meet challenging timescales, including multiple iterations of budget and target prices, • Contribute to optioneering and feasibility assessments, value engineering proposals, liaising with bid and project teams representing a range of disciplines to develop and refine proposals and budget costs through to final target price estimates, • Liaise with clients, designers and other consultants, quantity surveyors and other third parties, • Organise and administer tender documents, correspondence, enquiries and quotations, • Challenge and contribute to all aspects of the bid preparation and submission and investigate safe and cost-effective solutions, • Collect and distribute feedback and maintain awareness of latest techniques, • Prepare cost estimates from first principles using proprietary estimating software, • Organise and participate in bid preparation and review meetings, • Prepare tender summary information and priced risk and opportunity registers, • Prepare and communicate estimate information for bid review meetings and for handover to project teams, • Comply with company proceduresWhat do you bring to the role? xrnqpay, • Degree, HND in Civil Engineering or NVQ equivalent level, • Suitable civil engineering experience, • Proven estimating experience in civil / rail engineering bids, • Considerable variety in types of work and disciplines priced, with understanding of methods and typical production rates / outputs, • Demonstrable understanding of common forms of contract, • Should demonstrate leadership and management skills and have experience of managing a team to achieve deadlinesWhats in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day

Position: Associate Director of Structural Engineering Location: Cambridge My client who operates within the Civil and Structural Engineering are looking to appoint an Associate Director of Structural Engineer to lead their growing team based in Cambridge. sector e are looking for an experienced Senior Structural Engineer in their office in Hemel Hampstead. This highly reputable consultancy offers fantastic flexible working hours and hybrid working options with training and support as well as an excellent benefit and welling package. The role will suit a technically strong and commercially minded individual with a proven background in project delivery, client management, and team leadership within a structural consultancy environment. You will be responsible for overseeing a variety of projects from concept through to completion, managing client relationships, and playing a key role in developing the Cambridge office, particularly across the science, research, and commercial sectors. Associate Director Salary & Benefits Competitive salary (negotiable and dependent upon experience) Car allowance Bonus 5% Contribution towards a personal pension scheme Private health care and Death in Service benefit Holiday, 25 days BH option to bank, buy or sell holiday Training and continued career development Flexible working Other company benefits to be discussed upon interview Associate Director Job Overview Lead and deliver structural engineering projects across residential, commercial, and mixed-use sectors. Manage design, documentation, and project delivery to ensure compliance, quality, and deadlines are achieved. Act as the main point of contact for clients, ensuring strong communication and satisfaction. Provide technical leadership and input on complex design matters. Review and sign off the work of engineers and technicians, ensuring accuracy and compliance. Build and maintain new and existing client relationships to support business growth. Mentor and support junior engineers through Chartership and technical development. Associate Director Job Requirements Chartered Engineer (CEng MICE or MIStructE) Minimum 10 years' experience in structural design and project delivery. Strong background working within a consultancy environment. Excellent communication and leadership skills. Proficient in software such as Tekla, Tedds, and familiar with Revit/BIM processes. Strong understanding of Eurocodes, British Standards, and Building Regulations. Experience with BIM methodologies Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.c272c101-f45c-4783-b4a0-50ad222b87c0

A leading fire safety and compliance provider is seeking an experienced Service Engineer to carry out servicing, maintenance, remedials and repairs on a wide range of fire alarm systems, fire safety equipment, and life safety systems across the South East. This is a mobile role ideal for a Fire Alarm Engineer, Fire Safety Engineer, Fire Protection Engineer, or Fire Systems Service Engineer looking for stability, progression and varied work. 🔧 Key Responsibilities * Service, maintain and repair fire alarm systems, fire detection systems, and fire safety equipment * Carry out remedial works and light repairs on life safety systems * Diagnose faults, troubleshoot issues and complete system inspections * Complete accurate job sheets, service reports and compliance documentation * Work closely with clients to deliver high‑quality service and support * Participate in an out‑of‑hours call‑out rota ✔ Essential Experience * Proven experience as a Fire Alarm Service Engineer or Fire Safety Engineer * Strong fault‑finding, diagnostics and problem‑solving skills * Ability to work independently across multiple sites * Excellent communication and customer‑facing skills * Full UK driving licence and willingness to travel across the South East ➕ ...

Electrical Installation Engineer Cambridgeshire (Regional Travel) Permanent, Hybrid £45,000 - £55,000 Dependant on Experience Rise10 Recruitment are currently recruiting for an experienced Electrical Control Systems Installation Engineer on behalf of a well-established business operating within the Water and Wastewater sector. This is a hands-on role involving the installation, modification, and commissioning of LV assemblies, control panels, and associated equipment across multiple utility sites. The successful candidate will be a proactive individual who can work independently, liaise with clients, and support site teams to ensure high-quality project delivery. Responsibilities: • Install and commission new LV assemblies, control panels, kiosks, and associated equipment, • Carry out modifications and upgrades to existing control panels and electrical systems, • Perform fault finding, testing, and troubleshooting on electrical and automation systems, • Ensure all installations comply with current electrical regulations and site safety standards, • Liaise with clients, site representatives, and contractors to coordinate works and resolve issues, • Supervise team members or subcontractors when required, • Complete all documentation, permits, and handover reports accurat...

Site Engineer - Water & Wastewater Projects (WTW / WWTW) Location: Anglian Region (Multiple Sites) Salary: £45,000 - £55,000 per annum Job Type: Permanent An excellent opportunity has arisen for multiple Site Engineers to join a growing team delivering water and wastewater infrastructure projects across the Anglian region. These roles offer the chance to work on WTW (Water Treatment Works) and WWTW (Wastewater Treatment Works) projects, supporting the delivery of essential infrastructure within the UK water sector. The successful Site Engineers will take ownership of site engineering activities, including setting out, surveying, quality assurance and technical coordination, working closely with site management teams to deliver projects safely, efficiently and to a high standard. This is a fantastic opportunity to develop your career within a major infrastructure environment, with opportunities to mentor junior engineers and contribute to future talent development. Key Responsibilities As a Site Engineer, your responsibilities will include: Carrying out setting out, surveying and site engineering duties Managing day-to-day site quality assurance activities Conducting inspections, approvals and quality checks Supporting project delivery in line with programme, budget and quality standards Producing and reviewing red-line drawings and as-built information Preparing temporary works design briefs Coordinating...

RF Engineer Contractor | 3 Months | Outside IR35 |Full-time, Onsite | North Cambridge I am currently recruiting for a market leader in the field of critical communications. Their focus is on providing high quality products to a demanding, mission critical client base, which includes the police, paramedics, sea rescue, major airports, large mining facilities and utilities or oil and gas plants located in hazardous environments. We are looking for a couple of RF Engineers to join the team, who have been have been developing comprehensive TETRA and LTE solutions tailored for users across multiple sectors to address their critical communication needs. You will be responsible for: Technical design and specification of RF circuitry for radio terminal products: Complete subsystem design and implementation Integration with Baseband, Audio and MMI subsystems Component specification and sourcing Design test documentation Schematic creation and PCB layout supervision Technical requirements analysis Resolutions of design and integration issues Type approval supportKey Skills Needed: Bachelor's or Master's degree in Electronics Engineering, Telecommunications, or a related field. Extensive experience in RF design and development, ideally within the telecommunications or critical communications industry. Comprehensive knowledge of RF systems and technologies, including design, simulation, and testing. Proven hands-on design experien...

Quality Engineer We are working with a leading advanced manufacturing organisation to recruit a Quality Engineer. This is a key role within the Quality team, supporting operations, customers and suppliers while driving continuous improvement and ensuring compliance across complex manufacturing processes. This is an excellent opportunity for a quality professional with experience in highly regulated environments to take ownership of quality activities and influence business-wide performance. Responsibilities • Provide Quality support across operations, customers and suppliers to optimise performance and minimise disruption, • Lead and support root cause investigations (RCCA) for internal and external quality issues, • Drive continuous improvement initiatives using Lean, FMEA, APQP and other quality tools, • Conduct data analysis and reporting using statistical tools (e.g. Minitab) to support business decisions, • Support and carry out internal and external audits, including customer and regulatory audits, • Review specifications to ensure compliance and protect business interests, • Work cross-functionally with engineering, operations and global teams to resolve quality challenges, • Maintain and improve Quality Management Systems (QMS) and associated processes, • Ensure ERP and quality systems are aligned with customer and internal requirements, • Promote a strong quality culture across the site, maintaining visibility on the shop floor Key Requirements • Degree qualified in a scientific or engineering discipline (or equivalent experience), • Proven experience working within a complex Quality Management System environment, • Experience within aerospace, automotive or another highly regulated manufacturing industry, • Working knowledge of AS9100, IATF 16949 and/or ISO9001 (NADCAP awareness desirable), • Strong experience in root cause analysis, problem solving and continuous improvement methodologies, • Experience with statistical analysis tools such as Minitab, • Confident communicator, able to engage with stakeholders at all levels, • Experience supporting audits and working with customers and suppliers, • Self-motivated with the ability to manage priorities in a fast-paced environment

Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. BAM UK & Ireland's Infrastructure Segment is seeking an experienced Senior Planning Engineer to support the delivery of landmark energy infrastructure projects ac

Pre-Construction and/or Project Delivery with a tier 1 Contractor. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. BAM UK & Ireland's Infrastructure Segment are looking to recruit an experienced and motivated C

We are recruiting an electrically-qualified Crane Service Engineer to join our team based in the Glasgow/East Kilbride area.While professional experience and qualifications are key for this role, make sure to check you have the preferable soft skills before applying if required.We offer:A competitive basic salary, with a fantastic OTE (£55k-65K)Paid travel time from your home in the morning and on the return home from your last job of the day.Generous overtime and double time at weekendsCall out payment.33 days annual leave (includes bank holidays)Contributory pension + life assurance + income protection insuranceA Company van with satnav, corporate clothing and smart phone are provided.Employee Share Save SchemeRetail, grocery, DIY and leisure discountsEmployee assistance programmeEnhanced maternity and paternity payBuy and sell holidaysYour main responsibilities will include:You will perform preventative maintenance and repairs on electric overhead travelling cranes.Trouble- shooting equipment breakdowns.Consult with customers on repair and safety related issues.Complete appropriate documentation through your mobile device.This role reports to the Operations Manager.The role of a Crane Service Engineer will involve the maintenance, repair and upgrade of our customers lifting equipment, primarily overhead gantry cranes. The work we offer is varied and two days are rarely the same.What we are looking for in you:We ask that you are apprentice-trained (or equivalent) and conversant with electrical engineering disciplines.Mechanical knowledgePrevious experience working with overhead cranes and hoists is preferred, but maintaining, repairing, and servicing equipment in an industrial environment is essential.Based on 39 hours p/w Mon-Fri. Weekend overtime working will earn double time.Great communication skillsBe personable as there is regular customer contact.Health & Safety awarenessYou are able to work at height.Willingness to work extra hours this attracts paid overtime.Hold a current driving licence.Willingness to work on the on-call rota with an enhanced premium.Due to the location of our customers in Scotland, we anticipate you being away approx 30 nights a year, during which time accommodation and subsistence will be provided.What makes us special:We have been awarded the RoSPA Gold Medal (for 6 consecutive years Golds) Award for ourUK company safety performance!When you join our company, you immediately notice a sense of commitment, camaraderie, and lots of opportunities to grow professionally within our organisation. xjlbheb We provide specialised training on high-quality products, provision of all equipment and PPE along with excellent company working practices and industry-leading training programme.

Job | Application Engineer / Sales Support Engineer (Mechanical Bias) [Ref: 8873] Company | Bespoke Solution Integrator Areas | Food and Bev Expertise | Tendering, sales, pipeline development Development | progression to Account Managment Location | Cambridgeshire – hybrid / flexible The Challenge I am working with a process control integrator and machine builder who predominantly work within food and beverages. This company doesn't just build and sell machines; they sell high-performance turnkey integrated solutions. We are looking for a Mechanically Biased Technical Sales Support Engineer to bridge the gap between a client’s vision and a fully functioning production line. The ideal candidate is likely a mechanical mechatronics engineer who wants to work for a company that is serious about defining solutions with the customer and then delivering on that. You won't just be "supporting" sales; you will be the technical architect behind the proposal, ensuring that every conveyor, platform, and processing unit is physically viable, hygienically designed, and engineered for maximum throughput. The company want to go from £20m to £40m – you’ll be joining a high growth, high performance team that is fully resourced to dominate their target markets. What are we after? • Mechanical Mastery: You live in 3D CAD (SolidWorks or Autodesk Inventor). You can take a blank factory floor plan and design a complex, multi-stage processing line that respects both physics and floor-space constraints., • Project Architecture: Experience managing or supporting the lifecycle of large-scale mechanical installations (from £500k to £5M+). You understand BOMs, process control, fabrication lead times, and how these things all come together., • Efficient Design: Ideally, you have a background in the food, pharma, or chemical industries., • The "Technical Liaison": You can talk torque, belt speeds, and pneumatic pressures with the workshop, then pivot to explain the ROI and technical reliability to a Food Factory Manager., • Safety & Standards: Deep knowledge of the Machinery Directive, PUWER, and CE/UKCA marking from a mechanical and structural perspective. What You’ll Be Doing • Pre-Sales Engineering: Accompanying Sales Managers to sites to conduct technical surveys and feasibility studies., • Conceptual Design: Creating high-quality general arrangement (GA) drawings and 3D renders to "wow" the client during the bid process., • Costing & Risk: Working with production to ensure quotes are accurate and that the proposed mechanical solution is actually buildable. The Ideal Profile • Experience: You might be working on the engineering side now for a system integrator / machine builder wanting to have more of a say in how the up-front solution is designed., • Mindset: You are "mechanically curious and open-minded." You want to know how to solve production challenges for customers. We may close applications earlier for this role if we find a suitable candidate. Talentometry Limited is an executive search consultancy focusing entirely on businesses utilising or developing emerging technology. Unfortunately, we are only able to consider applications from individuals who are already eligible to work in the UK.

Senior Substation Secondary (P&C) Design Engineer Please ensure you read the below overview and requirements for this employment opportunity completely. Locations: Glasgow, Leeds, Birmingham or Epsom Duration: 12 months initially Rate: Negotiable on experience Inside IR35 Are you ready to make a real impact in the energy sector? Our client, a leading organisation in power and energy solutions, is seeking a talented Senior Substation Secondary (P&C) Design Engineer to join their dynamic team. This is a fantastic opportunity to work on high-profile projects, supporting clients like National Grid and SSEN across the UK and internationally. What you'll be doing: • Lead technical delivery of protection and control (P&C) design packages for substation projects, from Front End Engineering Design (FEED) to Detailed Design., • Provide technical guidance on protection schemes, relay settings, coordination, and substation automation., • Ensure quality assurance and governance of all design outputs, including SLDs, wiring diagrams, I/O schedules, and control room layouts., • Collaborate with multidisciplinary teams, clients, suppliers, and contractors, building strong relationships and understanding client needs., • Manage tender packages, respond to technical queries, and produce high-quality technical offers., • Attend and chair design and hazard review meetings, site visits, and support project delivery across transmission and distribution networks., • Solid understanding of electrical engineering, power systems, and energy markets., • Proven experience in substation secondary design, protection schemes, and automation., • Strong communication and teamworking skills, with a client-focused approach., • Ability to manage multiple projects, coordinate with diverse teams, and deliver high-quality outputs., • Knowledge of protection schemes, relay configurations, and substation automation., • Experience with SLDs, wiring diagrams, and interface drawings., • Ability to lead technical reviews and attend site visits.

Our client Scottish Power Transmissions are seeking a Senior P&C Design Engineer for an ongoing contract role based in Blantyre, near Glasgow, although operating hybrid. The information below covers the role requirements, expected candidate experience, and accompanying qualifications. Job Purpose Statement Develop and deliver Protection and Control engineering solutions for transmission networks (132kV and above) providing necessary basic and detailed engineering specifications and designs, innovation, effective technical support, advice and input throughout the lifecycle of projects. Accountability Statement • Define protection and control and ancillary apparatus requirements for input to System Construction Authorisation (SCA), Project Technical Specifications and BETTA documentation and advise on construction and outage programmes where required in relation to Control & Protection., • Prepare basic and detailed engineering specifications and designs for Networks and Plant Protection Systems, Network Automation and Substation Control Systems, Telecommunication Networks and Metering., • Provide technical assessment of tender submissions, preparation/review of Control & Protection design drawings and specifications., • Ensure Networks and Plant Protection Systems, Network Automation and Substation Control Systems and Telecommunication Networks are in accordance with current legislation, policies and operational requirements., • Provide technical support to the Project team on matters concerning the design, construction and operation of control and protection systems and lead the technical resolution of site/ construction Control & Protection issues., • Preparation of engineering documentation following quality processes to meet deliverables for PQP's and BETTA., • Perform all duties with a strong emphasis on health, safety, quality and environment compliance and continuous improvement and liaise across multi disciplinary engineering teams to provide end to end integrated solutions., • Geographical Area – be part of a team with team members located in one or more offices in Scotland & Manweb., • The roles will be fluid in that location in the organogram will rotate between the design function and the delivery function depending on design status, • Degree in an Engineering discipline with relevant experience., • Chartered Engineer Status (or working towards)., • Good inter-personal and communication skills and the ability to form effective working relationships with other individuals, departments and businesses., • Ability to implement, apply and promote CDM and Health & Safety best practice in a design environment., • Having the ability to investigate and understand technical characteristics of substation plant and associated equipment. xrnqpay, • An understanding in terms of the plant and equipment deployed for transmission networks and how it is operated / maintained., • Proven experience in a responsible position and knowledge in one or more of the following areas at voltages from 33kV to 400kV:, • Protection, • Substation and Network Control, • Automation, • Telecommunications, • Metering

Heavy Plant Engineer Make sure to read the full description below, and please apply immediately if you are confident you meet all the requirements. Glasgow & Surrounding Areas £40,000 – £50,000 + Overtime + Company Benefits NEOS Engineering Recruitment are currently working with a well-established and highly respected organisation within the construction and heavy plant sector who are looking to appoint an experienced Heavy Plant Engineer to support their operations across the Glasgow and surrounding areas. This is an excellent opportunity for a skilled engineer to join a business that operates a modern fleet of machinery and places real value on the quality and expertise of its engineering team. The role will involve the service, maintenance and repair of a wide range of heavy construction equipment, ensuring machinery remains safe, reliable and operating at peak performance. The Role • Service, maintenance and repair of heavy plant equipment including excavators, dumpers and pavers, • Diagnose mechanical, electrical and hydraulic faults efficiently, • Carry out planned maintenance and reactive breakdown repairs, • Ensure all work is completed to manufacturer standards and health & safety regulations, • Accurately complete job sheets and service reports, • Support operational teams by ensuring machinery downtime is kept to a minimum The Ideal Candidate, • Proven experience working as a Heavy Plant Engineer, Plant Fitter or Field Service Engineer, • Strong experience working on excavators and dumpers, • Experience working on pavers would be highly beneficial, • Strong fault finding ability across mechanical, hydraulic and electrical systems, • NVQ / City & Guilds in xrnqpay Plant Maintenance, Construction Equipment Maintenance or similar (preferred but not essential), • Full UK Driving Licence The Package, • £40,000 – £50,000 basic salary, • Overtime available, • Company vehicle / van, • Pension scheme, • Ongoing training and development

Join a world-renowned aerospace and defence organisation as a Senior Mechanical HVAC Engineer hybrid onsite in Scotstoun Would you like to join a global aerospace and defence organisation? Do you want to work as part of an organisation protecting people and maintaining maximum national security? Due to a drive for greater success, this advanced manufacturing business is currently searching for a Senior Mechanical HVAC Engineer to add to their talented, hardworking team in Scotstoun on a 12 month contract. Striving for innovation and creativity you can ensure no two days will be the same. The package: Like the look of this opportunity Make sure to apply fast, as a high volume of applications is expected Scroll down to read the complete job description. Senior Mechanical HVAC Engineer Scotstoun - hybrid 1-2 days per week UMB £40.64 per hour inside IR35 Initially 12 months likely to extend The role The Senior HVAC Engineer will lead the design, integration, and technical assurance of numerous HVAC systems across a complex marine platform. Duties • Preparing specifications and developing HVAC system designs in accordance with project requirements, technical standards, and quality expectations. This includes Heat Load Calculations, Psychrometrics, Pressure Drop Calculations and Single Line Diagrams (schematics)., • Carry out design appraisals in assigned areas to ensure compliance with all applicable standards and design criteria., • Participating in the development, maintenance, and modification of engineering processes and procedures relating to HVAC distribution systems, ensuring they remain aligned with technical developments, regulatory requirements, and operational needs. Experience • Experience in engineering or a defence related industry., • Has worked in typically two phases of the product lifecycle in the defence/maritime industry., • Has sufficient experience of the total product lifecycle to enable a good understanding of adjacent phases and through life engineering issues., • Knowledge of processes and tools used in Marine Engineering., • Experience in Supplier Management., • Experience writing technical specifications. Skills: • Microsoft Office Suite / Autocad / Foran., • Experience and expertise, in marine HVAC systems or Building Services HVAC System design. Work on complex, cutting-edge projects Achieve a work/life balance Develop your skills APPLY NOW If this sounds like the role for you, we'd love to hear from you! Send your CV to Stella today!

H&K have an exciting opportunity for an experienced Senior Electrical Building Services Engineer to join our successful Glasgow team. Our Glasgow office is working on an interesting and technically challenging range of projects across the Built Environment; with a current and forward workload in education, healthcare, mixed use developments, airport infrastructure, MOD, commercial and residential projects. Want to apply Read all the information about this position below, then hit the apply button. We are continually looking for the best talent to join our team within an inventive and creative environment which consistently delivers a high-quality service for clients ensuring that repeat and new business opportunities are developed. This is a great opportunity for you to showcase your technical skills in managing and delivering a wide range of projects alongside bringing creative flair to projects whilst inspiring our clients. As an experienced Senior Engineer, you will be able to demonstrate excellent technical knowledge and a thorough understanding of Building Services engineering and design through all stages of the design process while mentoring and supporting the development of junior engineers. You will be able to lead your own projects as well as work within office team groups on projects of various sizes and deliver a high-quality design on time to meet our clients expectations. Working with the latest software packages, you will be competent in AutoCAD and ideally have experience with REVIT. You will have experience in client facing activities including site and design team meetings within a similar environment. Ideally you will hold or be working towards Chartered Engineer status and already have or be able to obtain full security clearance. xrnqpay If you have the drive and determination to succeed, are a confident communicator with excellent technical skills and a portfolio of delivered projects, we can offer you an interesting and rewarding career alongside an attractive salary andan industry leading benefits package.

Fire & Security Engineer - Glasgow - Salary up to £40,000 DOE Read the overview of this opportunity to understand what skills, including and relevant soft skills and software package proficiencies, are required. CBW are looking for an experienced Fire & Security Engineer. You will be responsible for carrying out Planned Preventative Maintenance (PPM), Reactive Maintenance and extra works/emergencies in accordance with the contract requirements on Fire & Security Systems within Glasgow and surrounding areas. Key Responsibilities: • Carry out installation, planned preventative maintenance (PPM), servicing, and reactive maintenance of Fire & Security Systems in accordance with scheduled programmes and industry standards., • Diagnose faults efficiently and respond promptly to breakdowns, call-outs, emergency situations, and helpdesk requests, coordinating initial actions to minimise downtime and disruption., • Liaise proactively with clients, internal teams, and specialist subcontractors to coordinate works, maintain service standards, and ensure all contractual obligations are met., • Ensure strict adherence to engineering standards, onsite Quality Assurance procedures, company policies, and Health & Safety legislation, including compliance with HASAWA requirements., • Maintain accurate and up-to-date documentation, service records, and reports relating to maintenance activities, system performance, and equipment status., • Manage workload effectively, prioritising tasks to meet service level agreements and client expectations while supporting other trades where required., • Contribute to contract development by identifying opportunities for system upgrades, replacements, and additional project works., • Undertake additional duties as reasonably required to support the effective delivery and growth of the contract.Person Specification:, • Minimum of 3 years industry experience in the installation, maintenance, fault diagnosis, and rectification of Fire & Security Systems., • Fully qualified through a recognised Fire & Security Apprenticeship (or equivalent) with relevant certification to evidence competency in fire alarm systems., • Strong working knowledge of current fire and intruder alarm standards and regulations, with a clear understanding of industry compliance requirements., • Experienced in both IP and analogue CCTV systems., • IPAF trained and holder of a valid Chapter 8 ECS card (CSCS/ECS certification as required)., • Full, valid UK driving licence. xrnqpay, • Health and Safety trained, with thorough knowledge of site safety procedures and compliance standards.Salary & Benefits:, • Salary up to £40,000 DOE, • Company Van & Fuel card provided, • 24 Days plus statutory bank holidays, • Company pension

We are seeking an experienced Senior Design Engineer to join a growing Glasgow-based team delivering complex architectural systems projects. Please read the following job description thoroughly to ensure you are the right fit for this role before applying. This role combines technical design expertise with commercial awareness, supporting projects from tender through to fabrication. You will develop practical design solutions, produce accurate drawings and prepare competitive, compliant quotations while working closely with clients, suppliers and internal fabrication teams. Main Responsibilities: Design & Technical • Preparing faade and shop drawings using AutoCAD, • Developing details for curtain walling, punched windows, fixed lights and door ironmongery, • Interpreting architectural and structural drawings to produce coordinated faade designs, • Applying faade principles including glass specification, wind and barrier loads, weathering, drainage and thermal performance, • Liaising with design office and fabrication teams to deliver buildable, practical solutions, • Reviewing tender documents, drawings and specifications to determine scope, • Preparing detailed cost estimates and quotations for faade packages, • Carrying out material take-offs from drawings, • Obtaining and evaluating supplier and subcontractor quotations, • Identifying risks, assumptions, exclusions and opportunities for value engineering, • Preparing and submitting tender documentation to deadlines, • 510 years experience in faades (design, estimating or combined roles), • Strong background in steel faade systems (aluminium systems also considered), • High proficiency in AutoCAD and the ability to interpret architectural/structural drawings, • Good understanding of faade performance, loads, interfaces and waterproofing, • Strong numeracy, commercial awareness and analytical skills, • Excellent communication skills and confidence dealing with internal and external stakeholders, • Exposure to Schco UK systems and Jansen steel systems, • Experience with SchCal and/or LogiKal for design and pricing, • Strong Excel skills or similar estimating tools, • Experience with manufacturing and fabrication processes Mon-Fri role 9am to 5pm Salary £50k-£60k (movement is possible on this range for the right candidate) Please do hesitate to call for a confidential chat with one of our experienced recruiters. MAA International Ltd (Engineering Recruitment) are based in Motherwell, supplying quality people in the central belt of Scotland. xrnqpay We act as a Recruitment Agency and as an Employment Business, dealing with roles that are permanent, temporary and contract.

Senior Control Systems Engineer | Glasgow (Hybrid) 3 Days per week on-site | £Neg (Enquire for details) Find out exactly what skills, experience, and qualifications you will need to succeed in this role before applying below. MERITUS are working with a leading engineering and systems integration organisation based in Glasgow. They're looking for a Senior Control Systems Software Engineer to take a key role in delivering complex, high-impact projects. As a Senior Control Systems Software Engineer, you will be responsible for the design, development and implementation of PLC-based control systems within energy and utilities environments. You will work as part of a multi-disciplinary engineering team, supporting the delivery of reliable and high-performance control systems for critical energy assets. This role offers the opportunity to take ownership of technical deliverables, contribute to system design, and support commissioning activities across a variety of energy projects. Main Responsibilities: • Design, develop and test control system software for energy sector applications using Siemens PLC platforms, • Contribute to project delivery across all phases, from requirements definition through to commissioning, • Produce high-quality technical documentation including functional design specifications and test documentation, • Collaborate with internal teams and energy sector clients to ensure successful technical delivery, • Strong experience in the design & programming of Siemens PLCs (e.g. TIA Portal, S7, PCS7), • Experience delivering PLC/SCADA/DCS systems within the energy sector (e.g. generation, transmission, renewables), • Good understanding of control systems engineering across the full project lifecycle, • Knowledge of IEC 61131 programming languages (e.g. Ladder Logic, Function Block, Structured Text), • £Neg (Enquire for details), • 28 days holiday + bank holidays, • 6.5% pension matched, • Private medical insurance If you believe that you have the skills and experience for the role - then please get in touch. We also offer a referral scheme for any candidates whose details are passed to us that we successfully place. xrnqpay If you have any further questions then please contact Ryan Harris at MERITUS Talent.

Job Title:Fire & Security Service Installation Engineer The experience expected from applicants, as well as additional skills and qualifications needed for this job are listed below. Location:Glasgow Job Type:Full-Time, Permanent 39 hours Schedule:Monday to Friday (plus call-out rota as required) Job Purpose We are looking for a skilled and reliableFire & Security Service Installation Engineerto join our growing Fire & Security Service team. In this role, you will primarily carry out Small Works installations in line with our existing client base within our Fire and Security Division. You will play a key role in ensuring compliance, safety, and system reliability across customer sites. Key Responsibilities Installation of additional equipment to existing F&S systems and full system installations through lifecycle upgrades and system replacements • Ensure compliance with all relevant Health and Safety legislation and company procedures., • Complete detailed and accurate job documentation, reports, and asset records., • Coordinate with subcontractors and suppliers for specialist system support and installations., • Support and liaise with clients, ensuring a high level of customer satisfaction., • Take part in an on-call rota for emergency response, as required., • Carry out routine PPM in line with scheduled tasks and industry standards., • Respond effectively to reactive maintenance calls, breakdowns, and emergency situations., • Perform fault diagnosis and repairs on a range of Fire Alarm, CCTV (IP & Analogue), Access Control, and Intruder Alarm systems., • Identify opportunities for system upgrades, replacements, or improvements., • Assist other trade teams on-site when required. Internal: • Engineering Coordinators, • Clients and client representatives Essential: • Recognised Fire & Security Apprenticeship or equivalent experience, • Strong experience in one or more of the following main F+S disciplines:, • Fire Alarm systems, • IP and Analogue CCTV systems, • Intruder Alarm systems, • Access Control Systems, • Minimum of Nat 4 (or equivalent) in Maths and English, • Knowledge of current Fire & Security standards., • Industry experience in service, fault finding, and maintenance of Fire & Security systems, • Experience with IT and networking related to security systems, • Health & Safety training (e.g. Manual Handling, Working at Height), • Current ECS card, • IPAF trained, • PASMA qualified, • Teamwork:Works collaboratively to achieve shared goals, • Communication:Clear, professional, and effective with all stakeholders, • Planning & Organisation:Manages time, tasks, and priorities efficiently, • Commercial Awareness:Understands the impact of costs and efficiencies, • Risk Awareness:Identifies and mitigates operational risks, • Customer Focus:Delivers excellent service and builds positive relationships, • Adaptability:Responds positively to change and challenge, • Self-Motivation:Demonstrates initiative and a proactive approach All staff are required to take reasonable care for the health and safety of themselves and others, and to comply with all company health and safety policies and procedures. Benefits • Competitive salary awarded via engineers grading system with progression pathway through company training., • 25 days holiday + 8 days bank holiday plus birthday, • Attractive Pension Scheme, • Private Health Care, • Life Insurance, • On call payment door to door with additional stand by allowance, • Travel time paid each way beyond 30 minutes At Dalkia, we are committed to building a diverse and inclusive workforce that reflects the communities we serve. We value every individual and provide a supportive and respectful environment that promotes equality of opportunity. We welcome applications from all backgrounds, and we are proud to be an equal opportunity employer. Together, we aim to foster a workplace where everyone feels empowered to thrive and contribute their best. xrnqpay Apply nowto join a dedicated and forward-thinking engineering team focused on safety, reliability, and service excellence in fire and security systems.

Job Title: Multi Skilled Maintenance Engineer Submit your CV and any additional required information after you have read this description by clicking on the application button. Location: Ely Salary: £50,000- £53,000 Shift: 4 on 4 off days and nights Job Role of the Multi Skilled Maintenance Engineer A strong opportunity has become available for a Multi Skilled Maintenance Engineer to join a respected, industry-leading manufacturing business with a reputation for excellence. Engineers here benefit from working for a company recognised for quality and operational standards. You will be responsible for both electrical and mechanical maintenance, responding to breakdowns, completing planned preventative maintenance, and supporting continuous improvement initiatives across site machinery. Sector – Factory Maintenance Non-Negotiable Requirements of the Multi Skilled Maintenance Engineer • Multi-skilled maintenance experience within an industrial manufacturing environment., • Electrical and mechanical fault-finding experience., • Engineering qualification (Electrical or Mechanical)., • Previous experience working as a Maintenance Engineer in the UK., • Working for a recognised market-leading business., • Excellent benefits package including pension, life insurance, and gym access. For further details contact Eyleesha Bhatti at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. xrnqpay You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

Job Title:Fire & Security Service Engineer Apply (by clicking the relevant button) after checking through all the related job information below. Location:Glasgow Job Type:Full-Time, Permanent 39 hours Schedule:Monday to Friday (plus call-out rota as required) Job Purpose We are looking for a skilled and reliableFire & Security Service Engineerto join our growing Fire & Security Service team. In this role, you will be responsible for delivering Planned Preventative Maintenance (PPM), Reactive Maintenance, and emergency support across a range of Fire & Security Systems. You will play a key role in ensuring compliance, safety, and system reliability across customer sites. Key Responsibilities • Carry out routine PPM in line with scheduled tasks and industry standards., • Respond effectively to reactive maintenance calls, breakdowns, and emergency situations., • Perform fault diagnosis and repairs on a range of Fire Alarm, CCTV (IP & Analogue), Access Control, and Intruder Alarm systems., • Ensure compliance with all relevant Health and Safety legislation and company procedures., • Complete detailed and accurate job documentation, reports, and asset records., • Coordinate with subcontractors and suppliers for specialist system support and installations., • Support and liaise with clients, ensuring a high level of customer satisfaction., • Take part in an on-call rota for emergency response, as required., • Identify opportunities for system upgrades, replacements, or improvements., • Assist other trade teams on-site when required. Internal: • Engineering Coordinators, • Clients and client representatives Essential: • Recognised Fire & Security Apprenticeship or equivalent experience, • Strong experience in one or more of the following main F+S disciplines:, • Fire Alarm systems, • IP and Analogue CCTV systems, • Intruder Alarm systems, • Access Control Systems, • Experience with IT and networking related to security systems, • Health & Safety training (e.g. Manual Handling, Working at Height), • Current ECS card, • IPAF trained, • PASMA qualified, • Teamwork:Works collaboratively to achieve shared goals, • Communication:Clear, professional, and effective with all stakeholders, • Planning & Organisation:Manages time, tasks, and priorities efficiently, • Commercial Awareness:Understands the impact of costs and efficiencies, • Risk Awareness:Identifies and mitigates operational risks, • Customer Focus:Delivers excellent service and builds positive relationships, • Adaptability:Responds positively to change and challenge, • Self-Motivation:Demonstrates initiative and a proactive approach All staff are required to take reasonable care for the health and safety of themselves and others, and to comply with all company health and safety policies and procedures. Benefits • Competitive salary awarded via engineers grading system with progression pathway through company training., • 25 days holiday + 8 days bank holiday plus birthday, • Attractive Pension Scheme, • Private Health Care, • Life Insurance, • On call payment door to door with additional stand by allowance, • Travel time paid each way beyond 30 minutes At Dalkia, we are committed to building a diverse and inclusive workforce that reflects the communities we serve. We value every individual and provide a supportive and respectful environment that promotes equality of opportunity. We welcome applications from all backgrounds, and we are proud to be an equal opportunity employer. Together, we aim to foster a workplace where everyone feels empowered to thrive and contribute their best. xrnqpay Apply nowto join a dedicated and forward-thinking engineering team focused on safety, reliability, and service excellence in fire and security systems.

SENIOR FIRE ENGINEER Please ensure you read the below overview and requirements for this employment opportunity completely. We are looking for a Senior Fire Engineer to join Diamond & Co and play a key role in delivering high-quality fire engineering work across residential and Higher-Risk Buildings (HRBs). This role combines technically robust fire strategy design with faade fire risk analysis and remediation advisory work. Youll be trusted to take ownership of complex instructions, contribute to technical decision-making, and provide clear, practical advice aligned to UK regulations and best practice. Working under the direction of the Director of Fire Safety, you will collaborate with a multidisciplinary team across fire engineering, surveying and project delivery. This is a role for someone who enjoys technical depth, professional autonomy and work that genuinely matters. ROLE EXPECTATIONS This role requires strong fire engineering judgement, the ability to work independently, and a clear understanding of the UK regulatory framework across both England and Scotland. You will be expected to deliver consistently high-quality fire strategies and associated technical outputs, contribute to faade and remediation advisory work, and support HRB-related projects including safety case and regulatory engagement where required. You will also play an active role in mentoring junior engineers and supporting internal QA and technical development. WHAT SUCCESS LOOKS LIKE Youll be successful in this role if: • Your fire strategies are technically robust, clearly written and defensible, • Your advice is practical and proportionate, not tick-box, • You manage multiple instructions confidently and deliver on time, • Clients and stakeholders trust your judgement and communication Most weeks, youll be: • Developing fire strategies from RIBA Stage 26 for residential and mixed-use buildings, • Reviewing designs against Approved Document B, Scottish Technical Handbooks and relevant British Standards., • Supporting faade fire risk analysis and remediation advisory work, including PAS 9980-aligned reviews., • Contributing to HRB projects under the Building Safety Act 2022., • Supporting regulatory submissions and engagement (including Gateway exposure where applicable)., • Reviewing smoke control strategies, cause and effect matrices and supporting documentation., • Producing clear technical reports and communicating findings to clients and project teams. This role suits someone who: • Has a strong grounding in fire dynamics, structural fire engineering principles and compliance-led design, • Has experience delivering residential fire strategies (new build and/or retrospective), • Understands the requirements and expectations for Higher-Risk Buildings, • Can work independently, manage priorities and deliver consistently high-quality outputs You must meet one of the following qualification routes: Route A) MSc/MEng Fire Engineering (accredited) + 3+ years relevant experience + AIFireE Route B) BEng/BSc in a relevant engineering discipline + MSc/MEng Fire Engineering (in progress/committed) + 5+ years relevant experience + AIFireE You must also have working knowledge of Building Regulations / Approved Document B, Scottish Technical Handbooks, BS 9991/9999 and PAS 9980. Desirable: MIFireE, CEng, Gateway 2 exposure, faade remediation advisory experience, strong client-facing technical ownership. EXPERIENCE THAT HELPS • HRB portfolio exposure and compliance-led delivery, • Strong report writing and stakeholder communication, • Ability to review complex design information and identify practical risk solutions, • Competitive salary, aligned to experience, • Flexible working, with UK-wide project exposure (role dependent), • 25 days holiday + bank holidays, plus Christmas closure, • Private healthcare (after probation) + employee assistance programme, • Life assurance (3x salary), • Fully funded training and professional development, • Support with APC, CPD and professional qualifications, • Employee perks (Spectrum Life + Extras), Cycle to Work and free eye tests Diamond & Co is a UK-wide multidisciplinary building consultancy and fire engineering practice. The company combines chartered building surveying, architectural design, principal designer and project management services with specialist fire safety expertise to support commercial, residential and mixed-use developments across the UK and Europe. Known for delivering tailored, practical solutions, Diamond & Co focuses on technical quality over volume, providing clear, considered advice rather than tick-box reporting. Our experienced team works closely with clients to understand their needs, ensuring high-quality outcomes and professional standards on every assignment. HOW WE HIRE • Initial conversation with our talent team INTERESTED?

Air Conditioning Service & Maintenance Engineer For a complete understanding of this opportunity, and what will be required to be a successful applicant, read on. Central Belt and surrounding areas £35,000 - £45,000 + Door-to-Door Travel + Overtime We are working with a well-established and growing building services provider, recognised for delivering high-quality HVAC solutions across Scotland. Due to continued growth, they are looking to appoint an experienced Air Conditioning Service & Maintenance Engineer to join their expanding team. This business prides itself on delivering total solutions to its clients, with a team of highly skilled, conscientious engineers who can adapt to any situation. Their focus is on achieving complete customer satisfaction, ensuring clients receive reliable, end-to-end support from a trusted service partner. The Role • Service, maintenance and repair of air conditioning systems, • Fault finding, diagnostics, and component replacement, • Working across a variety of commercial environments, with a strong presence in the hospitality sector, • Carrying out works on a wide range of systems including VRV/VRF, chillers, heat pumps, AHUs and controls, • Producing detailed service reports, including health checks, F-Gas compliance, and system performance assessments, • Working to manufacturer standards using specialist diagnostic tools, • Supporting commissioning and re-commissioning works where required, • Assisting with manufacturer warranty works when applicable, • Working independently and as part of a wider engineering team The company operates across a diverse portfolio including direct client contracts, facilities management, public sector work, subcontracting, and supporting other service providers. They are also accredited service partners with leading manufacturers, reflecting their commitment to quality and technical excellence. What's On Offer • Salary: £35,000 - £45,000 (depending on experience), • Door-to-door travel pay, • 40-hour working week, • Overtime available (enhanced rates), • 20 days annual leave plus bank holidays, • Company van with private use, • Laptop and specialist service tools provided, • Ongoing manufacturer training opportunities, • No call-out / standby rota currently in place, • NVQ Level 2 or 3 in Air Conditioning & Refrigeration (or equivalent), • F-Gas Certification (Category 1), • Minimum 5 years' experience in AC service and maintenance, • Strong fault-finding and diagnostic capability, • Experience working with leading manufacturers such as Daikin, Mitsubishi Electric, Mitsubishi Heavy, Panasonic, Samsung, LG and Toshiba, • Full UK driving licence If you're an experienced Air Conditioning Engineer looking to join a reputable and growing business that values quality, technical expertise, and customer satisfaction, please apply or get in touch for further details. xrnqpay Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business.

12 Month Contract Learn more about the general tasks related to this opportunity below, as well as required skills. £40.64 per hour umbrella (Inside IR35) Hybrid Working – 1 – 2 days per week on site Job Role: The Senior HVAC Engineer will lead the design, integration, and technical assurance of numerous HVAC systems across a complex marine platform. They will apply deep expertise in system performance, capacity assessment, and optimisation to deliver robust, compliant, and customer focused solutions throughout the shipbuilding lifecycle. The role ensures high engineering standards by driving improvements to processes, supporting technical investigations, and providing evidence-based decision making. Strong HVAC and marine/building services systems experience is essential to ensuring system reliability and capability across the platform. Key Responsibilities: • Preparing specifications and developing HVAC system designs in accordance with project requirements, technical standards, and quality expectations. This includes Heat Load Calculations, Psychrometrics, Pressure Drop Calculations and Single Line Diagrams (schematics)., • Carry out design appraisals in assigned areas to ensure compliance with all applicable standards and design criteria., • Participating in the development, maintenance, and modification of engineering processes and procedures relating to HVAC distribution systems, ensuring they remain aligned with technical developments, regulatory requirements, and operational needs., • Carrying out specialist technical analyses and investigations, such as noise and pressure loss calculations, ductwork design optimisation, equipment performance assessments, and root-cause analysis for system faults. Prepare detailed technical reports with recommendations to support problem resolution, system improvement, and enhancement of HVAC capability., • Supporting the Principal Engineer as a specialist point of contact with customers and/or suppliers on HVAC engineering matters. This includes resolving technical issues, coordinating design intent, reviewing supplier data, and maintaining clear communication of priorities, performance requirements and objectives., • Experience in engineering or a defence related industry., • Has worked in typically two phases of the product lifecycle in the defence/maritime industry., • Has sufficient experience of the total product lifecycle to enable a good understanding of adjacent phases and through life engineering issues., • Knowledge of processes and tools used in Marine Engineering., • Experience in Supplier Management., • Microsoft Office Suite / Autocad / Foran., • Experience and expertise, in marine HVAC systems or Building Services HVAC System design., • Experience in the design, build, integration, support and operation of Naval ships (desirable), • Awareness of Life Cycle Management reviews of bids and programmes., • Degree qualified in an engineering or other related discipline, would be preferred or relevant experience., • Meet the requirements for registration as Incorporated Engineer with the Engineering Council and be a member of a relevant Professional Body

CNC / EDM Engineer - Glasgow Talent Media are delighted to be working in partnership with a leading high-precision manufacturing business within the advanced engineering sector, as they look to appoint a CNC Operator EDM to join their team at their Glasgow facility. Find out exactly what skills, experience, and qualifications you will need to succeed in this role before applying below. Our client delivers complex, precision-engineered components to highly regulated industries, operating to exceptionally high quality and technical standards. This role will focus on the set-up and operation of EDM (Electrical Discharge Machining) equipment, including both spark and wire erosion processes, ensuring components are manufactured accurately to tight tolerances. Key Responsibilities • Set up and operate EDM machinery (spark and wire erosion), • Load materials and unload finished components, • Adjust machine settings to ensure optimal performance and accuracy, • Interpret and work from technical engineering drawings, • Maintain accurate production records, including machine adjustments and issues, • Conduct routine machine checks and report any faults or safety concerns, • Ensure machines are stocked with tooling and materials to minimise downtime, • Adhere to all health, safety, and quality proceduresSkills & Behaviours, • Strong attention to detail with a focus on quality, • Effective communication and team collaboration, • Ability to follow technical instructions and processes, • Proactive and adaptable to production demands, • Safety-conscious approach in a manufacturing environmentQualifications & Experience, • Ideally time-served or experienced in EDM machining, • Experience with 5-axis machining and EDM is highly desirable, • Will also consider candidates with EDM experience alongside another machining discipline, • Ability to read and interpret engineering drawings, • Experience working to tight tolerances on precision components, • Good understanding of manufacturing and safety proceduresWhats in it for you?, • £22.01 per hour + shift allowance, • 37 hours per week, • Three-shift rotation (early, back, night shift), • Day shift for the first 4 weeks during training, • Full-time, permanent opportunity, • Company benefits including pension, life insurance, private medical healthcare, prescription safety eyewear, and employee retail discounts, • 33 days holiday including Christmas shutdown, • Access to online learning and development platforms Apply today or contact Talent Media for a confidential conversation.

Technical Sales Support Engineer (Mechanical Bias) Location: Cambridgeshire (hybrid) Salary: up to £65,000 Wider Package Sector: Food Processing & Automation Solutions The Challenge I am working with a process control integrator and machine builder who predominantly work within food and beverages. This company doesn't just build and sell machines; they sell high-performance turnkey integrated solutions. We are looking for a Mechanically Biased Technical Sales Support Engineer to bridge the gap between a clients vision and a fully functioning production line. The ideal candidate is likely a mechanical mechatronics engineer who wants to work for a company that is serious about defining solutions with the customer and then delivering on that. You won't just be "supporting" sales; you will be the technical architect behind the proposal, ensuring that every conveyor, platform, and processing unit is physically viable, hygienically designed, and engineered for maximum throughput. The company want to go from £20m to £40m youll be joining a high growth, high performance team that is fully resourced to dominate their target markets. Your Engineering Pedigree Mechanical Mastery: You live in 3D CAD (SolidWorks or Autodesk Inventor). You can take a blank factory floor plan and design a complex, multi-stage processing line that respects both physics and floor-space constraints. Project Architecture: Experience managing or supporting the lifecycle of large-scale mechanical installations (from £500k to £5M). You understand BOMs, process control, fabrication lead times, and how these things all come together. Hygienic Design: Ideally, you have a background in the food, pharma, or chemical industries. E.g. youve designed CIP for dairy. The "Technical Liaison": You can talk torque, belt speeds, and pneumatic pressures with the workshop, then pivot to explain the ROI and technical reliability to a Food Factory Manager. Safety & Standards: Deep knowledge of the Machinery Directive, PUWER, and CE/UKCA marking from a mechanical and structural perspective. What Youll Be Doing Pre-Sales Engineering: Accompanying Sales Managers to sites to conduct technical surveys and feasibility studies. Conceptual Design: Creating high-quality general arrangement (GA) drawings and 3D renders to "wow" the client during the bid process. Costing & Risk: Working with production to ensure quotes are accurate and that the proposed mechanical solution is actually buildable. Mentorship: Acting as the senior mechanical voice within the office, guiding junior technicians and refining internal design standards. The Ideal Profile Experience: You might be working on the engineering side now for a system integrator / machine builder wanting to have more of a say in how the up-front solution is designed. Mindset: You are "mechanically curious and open-minded." You want to know how to solve production challenges for customers. We may close applications earlier for this role if we find a suitable candidate. Talentometry Limited is an executive search consultancy focusing entirely on businesses utilising or developing emerging technology. Unfortunately, we are only able to consider applications from individuals who are already eligible to work in the UK.c272c101-f45c-4783-b4a0-50ad222b87c0

Now Hiring: Quality Control / Raw Materials Test Engineer. Quality and Materials Engineering team.

A leading medical technology company in Cambridge seeks a Product Engineer to support product innovations and ensure compliance with stringent quality standards.

VINCI Facilities is a Facilities Management and Building Solutions provider, delivering cost-effective and sustainable bespoke solutions to customers in the public and private sectors. VINCI is seeking a dependable and experienced Air Conditioning Engineer to deliver high-quality repairs and mainten

A leading provider of thermal imaging technology in Waterbeach seeks an Electronics Engineer to join a new Production Engineering team. You will work cross-functionally to ensure quality standards and efficiency, leveraging your engineering background in electronics.

The CAPA Engineer role within CMR Surgical (CMR) is a key position contributing to our ongoing commitment to quality management. Additionally, this role involves providing support for quality system activities and internal and external auditing activities. Addressing quality issues and ensuring the

A leading pharmaceutical research firm is seeking a Quality Engineer – Compliance for a 12-month hybrid contract in the Cambridge area. You will lead design control and risk management activities related to medical devices and combination products, prepare essential documentation, and ensure compl

Working within Nuclear and Power, Power New Build group, you will be an integral part of delivering exciting large nuclear new build projects such as Hinkley Point C, Sizewell C, and a variety of other major upcoming prospects. Direct, relevant nuclear sector experience. We're AtkinsRéalis, a world

A global engineering consultancy is seeking a Senior Associate Mechanical Engineer to lead mechanical design and deliverable quality for water and wastewater projects. The ideal candidate will have Chartered Status and significant experience in UK water sector design.

We are looking for a detail-oriented and proactive QA Engineer with 6+ years of experience in manual testing, with a strong focus on database testing. Perform manual testing of web applications to ensure quality, functionality, and performance. Minimum 6 years of experience in manual testing of web

A leading technology company in the UK is seeking an experienced release engineer to join their distributed team.You will manage the release process for high-quality embedded software, enhance CI/CD automation, and collaborate on defect management.Ideal candidates will have experience with software

A recruitment agency is looking for an Electronics Engineer to join a dynamic engineering team in Cambridge.The successful candidate will engage in all stages of the product lifecycle, ensuring that new PCB designs meet high-performance, reliability, and quality standards.Key responsibilities includ

Quality Engineering in the medical device industry. In this exciting role as a Quality Engineer – Manufacturing, you'll actively collaborate with Operations, Production, and Process Development teams. Additionally, you will contribute to identifying and implementing improvements in our Quality Man

A global Pharmaceutical organisation is seeking a Quality & Compliance Engineer for a contract position in Cambridge. This role will involve working on combination products, supporting product development from design through to manufacturing, ensuring compliance with quality standards.

You will lead design control and risk management activities, ensuring compliance with quality standards.

Material Logistic Engineer – Product Sustainability, Quality, & Logistics. Zoetis Veterinary Medicine Research and Development, Product Sustainability, Quality & Logistics in Cambridge, UK is seeking a talented, experienced individual to provide logistic oversight at the Sr. BS/MS in Logistics or

Trinity Fire & Security Systems are seeking an experienced Works Engineer to deliver high‑quality installation and commissioning across our client portfolio, ensuring system integrity and compliance. Deliver planned installs and commissions to fire systems. Fire: Gent, Notifier, Advanced, Protec,

A leading recruitment agency is seeking a skilled Fire & Security Installation Engineer in Cambridge. You will focus on delivering high-quality installations of Fire Alarms, Access Control, and CCTV systems.

Familiar with Human Factors Engineering - Usability Engineering. Cpl Life Sciences are looking to recruit a Quality & Compliance Engineer to join a global Pharmaceutical organisation based in Cambridge. Senior Consultant @ Cpl Life Sciences - Contract Engineering UK/EU.