2nd shift jobs in Houston, Texas - Page 3Create job alerts

Job DescriptionWork Schedule: This position is designated for Second Shift (3:00 PM – 12:00 AM). Position Objective Drive operational excellence for automated equipment production by providing comprehensive support. Optimize equipment performance, resolve critical failures, contribute to new solution development, enhancing equipment stability, Spearhead digital transformation initiatives to advance manufacturing technology. Duties and Responsibilities • Design & Evaluation – Collabrate with stakeholders to develop and evaluate integrated automation system design (mechanical/electrical/software) based on operational requirements. ., • Technical Documentation – Create and maintain clear, detailed technical documentation including design specifications, operational manuals, and commissioning reports., • Prototype Commissioning and Developement– Lead on-site debugging, validation and production launch for new/retrofit automation equipment, • Operational Stability & Support-Ensure equipment reliability through rapid critical failure resolution and technical support, • Capability Development-Design and deliver training programs to enhance maintenance team competenciesEducation and work experience, • Education: Undergraduate degree or higher, • Modern, collaborative offices or labs with flexible setups emphasizing innovation and teamwork., • Ability in automation equipment development, debugging, and commissioning, • Technical documentation proficiency S0sdsIaMXc

Job Description Reports to: Production Manager Cooperates with: Operations/Production, Safety, Procurement, Engineering, Human Resources Located: Houston, TX Primary Responsibility: The 2nd Shift Supervisor is responsible for leading and managing the team of 2nd shift employees and ensuring the efficient and high-quality production of products, parts, or components. Shift: 2nd Shift, Monday - Thursday, 3:00 pm to 1:30 am. Specific Duties and Responsibilities: • Help ensure employees safely conduct themselves and safety measures are being complied with., • Supervise and lead a team of employees during the second shift. Facilitate daily team startup meetings and safety meetings., • Foster a positive and productive work environment., • Provide guidance, coaching, and support to team members to ensure they meet their performance goals., • Oversee the efficient and effective operation of the second shift., • Ensure that all tasks and responsibilities are completed in a timely and accurate manner., • Address and resolve any issues or challenges that arise during the shift., • Monitor product or service quality to ensure it meets company and customer expectations., • Communicate with management on issues and production requirements through conversations, phone, or email., • Help support activities related to Quality and Manufacturing Engineering, • Experience managing teams, preferably in a manufacturing environment., • Ability to read, analyze, and interpret company documents including production drawings., • Strong leadership and management skills are essential to lead and motivate a team effectively., • Excellent verbal and written communication skills to convey instructions, report issues, and collaborate with other departments., • The ability to identify and address issues, make decisions under pressure, and implement solutions is crucial., • Basic Computer skills using applications such as email Microsoft Word and Excel., • Secondary education or training in manufacturing and continuous improvement are desirable., • Health, Dental & Vision Insurance, • Annual Bonus Program, • $350 Annual Wellness Credit, • Flexible Spending Account (FSA), • 401k with match up to 5%, • Life insurance, • Disability insurance, • 4 days of paid sick leave annually, • 12 days PTO annually (prorated based on start date) Job Posted by ApplicantPro

Job DescriptionDescription: Are you ready to make an impact? Are you ready to be a part of a stable and growing organization perfect to grow yourself and your career? Then read on: At Trace-A-Matic we believe the people are our biggest assets! We provide a friendly, clean and safe work environment for all to grow and thrive! Our core focus is to achieve excellence in complex precision machined components and customer satisfaction. We also offer Gainsharing! So, if the company makes a profit, they split it 50/50 with the employees, which gets paid out on a quarterly basis! Trace-A-Matic Offers: • Health, • Dental, • Vision, • 401K, • Gain Sharing, • Tuition Reimbursement, • 10 paid holidays, • Service Based PTO, • Tuition Reimbursement Responsibilities & Duties • Ability to set up all repeat jobs that are fully documented, • Run the first piece to print specification, • Knowledge of programming and may have ability to make edits or program., • Manually inspect the part to the inspection sheet criteria, • Ability to read blueprints to a medium/high level and correlate that back to the inspection protocol and documentation, • Knowledge of GD&T tolerancing, • May run multiple machines simultaneously as a production cell, • Advanced shop math with trigonometry and geometry, • Mentor and train operators, • High School Diploma/ CNC technical diploma preferred, • 5+ years of Machining experience Company: Trace-A-Matic Location: Houston, TX Salary Description$26.00 - $33.00/hour Prosource Trace-A-Matic provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Labor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631; (956)247-2467; (281)965-2749 Walk-ins Accepted! Apply today! 815 Sheila Lane Channelview, TX 77530 Office Hours: 8:00 AM-5:00 PM General Information Job Description: A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. Repair and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). The journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action., 5. Must have a thorough knowledge of experience with P-73 joint fit-up., 6. Must have a comprehensive knowledge of Silver Brazing theory., 8. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 9. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting., 10. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work., 11. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 12. Must have six (6) years of pipefitting experience, four (3) of which in the maritime repair environment. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipefitter Improver and Helper if assigned., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and shipyard's best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for work, taking special care if hot work is required. Verify gas free certifications and tag-outs, before commencing any work. b. Run lines and leads required to accomplish work. Accomplish drop test if using flammable or oxygen depleting gases. c. Inspect work for defects before turning the job over to welders. Correct fit-ups as required.. Confer with supervision before correcting deficiencies. d. Document existing conditions before commencing work using Condition Found Reports (CFR). e. Remove damaged pipe in accordance with drawings and specifications. f. Measure or template pipe for fabrication. g. Blank systems in accordance with standard Item 009-24 or other applicable safety standards. h. Fit up new pipe using the proper fit up type in accordance with specifications. i. Ensure a strain free fit-up to pumps or other connecting equipment. j. Blank tanks and accomplish boundary air tests. k. Accomplish or verify Lock-out Tag-out requirements before commencing. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 75 lbs on an occasional basis (0-25% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (25-75% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionNorth Houston - IAH area Day Shift 5:00 am - 5:00 pm$25 -$30 an hour depending on Experience REQUIRES: • Requires a high school diploma or equivalent., • Monitors and operates boiler., • Prepares for annual boiler inspection and water treatment testing., • Maintains boiler by replacing parts as needed., • Troubleshoots problems to completion and repair on the following: Mechanical, Hydraulic, and Electrical systems for CNC Mills, CNC Lathes, Manual Mills, Manual Lathes, Mold Injection machines, Steam Boilers, Autoclaves, Spray Systems, Sandblasters, and various Forklifts up to 12,000# carrying capacity., • Performs preventive maintenance on equipment according to a Preventive Maintenance Schedule to ensure production schedules are met with properly functioning equipment., • Keeps accurate records/logs of maintenance and other documents., • Understands the proper use of power tools and pipe threading machines., • Reads basic drawings, electrical and hydraulic schematics., • Properly uses and cares for equipment., • Supports "team" concept of getting the job done., • Performs other duties as directed or required., • Experience, • Requires at least 5 years of related experience including:, • Boiler Operator, • Repair of CNC and Manual Machines, • Repair of Sandblaster Machines, • Lock-Out Tag-Out Procedure

Job Description The Logistics Supervisor is responsible supervising the operations and distribution functions of the warehouse. Supervises activities of those engaged in the movement of finished goods, parts and inventory control activities. Proactively engages with management and employees to improve operational processes and maintains a safe and clean work environment for all employees. Position Responsibilities May include; • Check operation status report for daily shipments both inbound and outbound to ensure manpower levels re are assigned to meet daily volume, • Train, develop and mentor all employees including issuing discipline when appropriate, • Track daily, weekly, and monthly KPI’s and ensure KPI’s are communicated within the operation., • Ensure all processes and procedures are documented and followed, • Manages safety and housekeeping procedures that result in a clean and safe working environment, • Manages logistic incident investigations and implements corrective action measures in line with job responsibilities and results of the investigation, • Provide a communication network between direct reports and middle and upper management, • Encourage and lead team members to work in a safe manner and to seek improvement in work practices for their benefit, • Responsible for maintaining a high level of inventory accuracy for all product classes, • Ensure all MHE is always in proper working order, • Other duties as assigned by warehouse management Nature & Scope: • Coordinates and supervises the daily activities of a support, production or operations team, • Sets priorities for the team to ensure task completion, • Decisions and problem-solving are guided by policies, procedures and business plan; receives guidance and oversight from manager, • Accountable for the support or production operations team including subordinate work leaders, • Typically does not spend more than 20% of one's time performing the work supervised Knowledge & Skills: • Exceptional leadership skills and the ability to motivate people to perform at high levels and within established timelines, • Working knowledge of warehouse management systems within warehouse environments, • Intermediate MS Office (Excel, Outlook, PowerPoint, Word), basic math skills to include adding, subtracting, multiplication and division., • Excellent communication skills, including collaboration, • Effective relationship management skills for both internal and external customers, • Strong problem-solving skills and ability to react quickly to resolve problems, • Self-motivated, positive attitude, high-energy individual who can multitask well, • Must be quality conscious, process and customer oriented, • Effective organizational and time management skills, • Ability to work both independently and collaboratively with others toward mutual objectives and able to influence across non-direct reports on cross-functional teams, • Familiarity with 5S, Lean principles and Kaizen, • Must be able to work in inclement weather, weekends, late evenings, and overtime during the peak season. Experience: • 5+ years of HVAC controls related experience, • Professionally trained with major brands of residential HVAC systems and controls, including 24v and communicating ones, • Knowledge of communicating system and ducted zoning system is a strong plus, • Experience with literature, troubleshooting guide and other documentation development Education/Certification: • 5 plus years of progressive experience preferably within a high-volume DC environment, • 2 plus years of leadership experience People Management: Yes Physical Requirements / Work Environment: Must be able to perform essential responsibilities with or without reasonable accommodations. Must be able to travel on business or work beyond normal work hours as necessary Reports To: Manager, Logistics Qualified Applicants must be legally authorized for employment in the United States. Qualified applicants will not require employer sponsored work authorization now or in the future for employment in the United States. The Company provides equal employment opportunity to all employees and applicants regardless of a person’s race, color, religion (including religious dress or grooming practices), creed, national origin (including language use restrictions), citizenship, uniform service member or veteran status, ancestry, disability, physical or mental disability (including HIV/AIDS), medical condition (including cancer and genetic characteristics), genetic information, request for protected leave, marital status, sex, pregnancy, age (over 40), sexual orientation, gender, gender identity or expression, political affiliation, or any other characteristic protected by law. The Company will comply with all federal and state regulations and statutes pertaining to individuals with disabilities.

Job DescriptionJob Title: Sandblast Operator (3rd Shift) Job Description This role involves operating sandblasting equipment to clean and prepare metal parts that are used to manufacture airplane frames in a large forging and fabrication facility. You will work primarily on 3rd shift, supporting production by sandblasting components, moving materials with forklifts or cranes, and assisting with metal cutting and forming operations as needed. The position requires strong attention to detail, accurate measuring, and a commitment to maintaining a clean and organized work area. Responsibilities • Operate sandblasting equipment to clean and prepare various metal parts and materials used in aerospace and airplane frame fabrication., • Set up and adjust sandblasting machinery and related equipment according to job specifications and safety requirements., • Handle and move parts and materials around the shop using a forklift, jib crane, or overhead crane when required., • Assist machine operators with cutting, forming, and fabricating metal parts to support overall production needs., • Measure parts accurately using a tape measure and other basic measuring tools to verify dimensions and quality., • Read and interpret basic blueprints and production documentation to understand job requirements and specifications., • Operate or support operation of CNC machines, saws, bandsaws, and other production equipment as needed., • Perform basic machine setup and changeovers for sandblasting and related fabrication equipment., • Monitor production processes to maintain consistent quality and meet production goals in a high-volume environment., • Maintain a clean, safe, and organized work area, including regular housekeeping of sandblasting and surrounding workstations., • Follow all safety procedures and use appropriate personal protective equipment while working with industrial machinery and materials., • Collaborate with other shop employees, including machine operators, material handlers, and quality control staff, to ensure efficient workflow., • Support other areas of the shop as needed, including general machine operation and material handling.Essential Skills, • At least 3 years of experience in a manufacturing environment., • Hands-on sandblasting experience in a shop or industrial setting., • Good, stable job tenure demonstrating reliability and commitment., • Experience operating a forklift, jib crane, or overhead crane for material handling., • Ability to accurately read and use a tape measure for measuring parts and verifying dimensions., • Ability to read and understand blueprints or basic technical drawings., • Experience with machine operation in a production environment, including setup and basic troubleshooting., • Comfort working in an industrial fabrication or sheet metal environment., • Strong basic math skills to support measuring, layout, and production calculations., • Ability to work 3rd shift hours and overtime as needed., • Commitment to safety and consistent use of appropriate PPE.Additional Skills & Qualifications, • Experience as a furnace operator in a forging or heat-treat environment., • Previous forge or heavy industrial experience., • Extensive measuring experience with various measuring tools beyond a tape measure., • CNC machine operating experience, including setup and operation., • Experience with various types of machine operation such as saw operation, bandsaw operation, and general production machinery., • Background in aerospace or precision fabrication environments., • Experience with machine setup, including setting up machines for new jobs and changeovers., • Strong attention to detail and ability to maintain organization in a fast-paced production setting.Why Work Here? The company fosters a culture where employees feel valued, supported, and encouraged to build long-term careers. The shop maintains strong employee tenure, and many individuals choose to return after exploring other opportunities, reflecting a positive and stable work environment. You can expect clear organization, well-labeled work areas, and a team-oriented atmosphere where everyone contributes to shared production goals. Work Environment This position is based in a manufacturing environment that is non-climate-controlled, so it can be hot during the summer months. The facility has an older exterior, but the shop itself is kept as clean and organized as possible, with clearly labeled areas and equipment. You will work alongside approximately 40 shop employees, including machine operators, material handlers, quality control staff, and leadership. Appropriate work attire includes steel-toe footwear, jeans, and a work shirt, along with all required personal protective equipment provided or specified by the company. The role is for 3rd (night) shift, with typical hours of Sunday 9:00 p.m. to 5:30 a.m., then Monday through Wednesday from 5:00 p.m. to 5:30 a.m., with Thursday scheduled as needed. All positions train on day shift for approximately two weeks before moving to the assigned shift. Day shift typically runs Monday through Thursday from 5:00 a.m. to 3:30 p.m., with Friday from 5:00 a.m. to 1:30 p.m., and additional hours or weekend work as needed. A separate 2nd shift operates Monday through Friday from 1:00 p.m. to 9:30 p.m. Job Type & Location This is a Contract to Hire position based out of HOUSTON, TX. Pay and Benefits The pay range for this position is $18.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you will perform a full range of automotive repairs—from light maintenance to heavy engine work—and diagnostics on our vehicles, including: • Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work., • Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers. • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English

Job Description Position Title: Machinist III Department: Manufacturing Location: Houston, TX Reports To: Machine Shop Supervisor Classification: Non-Exempt Shift: 2nd Shift Position Summary: Perform setups and run production jobs on multiple CNC machines using knowledge of machining to optimize the production of parts. Essential Job Duties: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Read and interpret Engineering drawings., • Make accurate measurements with precision micrometers and various other instruments., • Thorough knowledge of GD&T., • Ability to read and edit G & M codes , teach tools, and load programs, • Ability to perform set-ups on CNC machines, lathe and/or mills, • Thorough knowledge of tooling, materials and cutting parameters., • Promotes the company initiative of Lean Manufacturing/ Continuous Improvement projects., • Ability to work with little to no supervision., • Able to train and assist CNC Operators. Essential • High School diploma or general education degree (GED), or Essential • 7+ years as CNC machinist primarily with FANUC or MAZAK controls., • Knowledge of G & M codes, editing the programming., • Ability to identify and solve problems., • Ability to perform own set-ups., • Strong math skills., • Strong verbal and written communication skills., • Basic computer skills., • Physical ability to stand, bend, sit, walk and lift up 40 pounds for 8 to 12 hours per day. Gilmore has a Business Ethics Policy (the "Policy") which provides guidance to employees in day-to-day roles, as well as helping the employee and the business comply with the law at all times. The incumbent must read, understand and comply with, at all times, the Policy along with all other corresponding policies, procedures and directives. QHSE Responsibilities: • Demonstrate a personal commitment to Quality, Health, Safety and the Environment, • Apply Gilmore, and where appropriate Client Company's, Quality, Health, Safety & Environment Policies and Safety Management Systems The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Physical Dexterity required; ability to ascend/descend ladders; ability to lift, push, pull, and move objects fifty (50) pounds or more., • Ability to wear and utilize Personal Protective Safety Equipment (PPE). Required equipment includes steel toed shoes, safety glasses/goggles. Additional PPE may be required, e.g., safety harnesses, Fire Retardant Clothing (FRC), hard hats, or other as assigned. The work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. Founded in 1963, Gilmore, a Control Devices, LLC company, is an industry leading flow control technology company that improves the reliability, integrity, efficiency, and productivity of critical infrastructure. Gilmore's flow control solutions are suited to the toughest environments and across all markets where critical service requirements make them essential (high temperature, high pressure). Gilmore offers competitive compensation, a comprehensive benefits package, paid time off, and a solid 401(k) retirement plan to promote financial security. Gilmore is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionDescription:Position Overview A well-established manufacturer and distributor of pipe fittings and components is seeking a CNC Machinist to join its production team in Houston, TX. The ideal candidate will bring precision, efficiency, and a strong understanding of CNC machinery to help deliver high-quality industrial products used across the energy, petrochemical, and construction sectors. This is a 2nd Shift only opportunity Key Responsibilities • We are looking for LOD VTL operators to run 3 machine cells, • Set up and operate CNC lathes and mills to machine components to exact specifications., • Interpret technical drawings, blueprints, and work orders to determine tooling and setup requirements., • Load and verify CNC programs; adjust speeds and feeds to optimize quality and productivity., • Inspect finished parts using precision measuring instruments (calipers, micrometers, thread gauges)., • Conduct in-process checks and make minor program edits or tool offsets as needed., • Monitor equipment performance, conduct routine maintenance, and report issues to maintenance or supervision., • Experience in the pipe fitting or industrial hardware sector., • Background working with oil & gas or heavy industrial products., • Must be able to set up and indicate on manual tables 30” NPS flanges., • Must be willing to work 2nd shift (4pm-1am Monday-Friday) with possibility of overtime., • High school diploma or GED required; trade school or machining certificate preferred., • Minimum 2–3 years of experience operating CNC machines in a manufacturing environment., • Proficiency in reading engineering drawings and using inspection tools., • Familiarity with machining stainless steel, carbon steel, and alloys is a plus., • Knowledge of G-code/M-code programming and CNC control systems (e.g., Fanuc, Haas) preferred., • Ability to work independently, solve problems, and ensure part quality with minimal supervision.

Job DescriptionService Wire Company, a premier supplier of industrial and utility wire and cable, is currently seeking a 2nd shift Wire Cutter in Houston, TX If you are looking to join a great organization and a chance to become a part of our growing team, this may be the opportunity for you! No experience required- we provide full training! Position Summary:Our Wire Cutters process material cuts according to customer specifications, record distribution data in order to expedite and prepare orders for shipment. They also work to maintain inventory stock and an organized warehouse, and transport wire and materials throughout the facility using a forklift. Tasks/Duties/Responsibilities: • Cut wire to specified length based on customer requirements, • Palletize and prepare orders for shipment, • Record all material information to include: item code, damage, reel number, miscuts, location, and cut information, etc., • Process orders based on urgency and expedite accordingly, • Assist with inventory control and maintaining stock levels, • Maintain safety standards and clean/organized work environment, • Additional duties as assigned by supervisorKnowledge/Skills/Requirements:, • High School Diploma/GED (General Equivalency Diploma) or one year related industrial experience or equivalent training, • Demonstrate strong basic math and measuring skills, • Ability to read, comprehend, and respond to general instructions, direction, and correspondence, both oral and written, • Cooperatively works and interacts with members various departments * Personal protective equipment is required, • Continuous participation in company safety training, • Company forklift operation training and certificationPhysical Demands/Work Environment, • Temperatures may be impacted by extreme outdoor weather in plant and warehouse, • Regularly stands, bends, and reaches for extended periods, • Regularly moves about the facility, • Regularly lifts and moves materials up to 50 pounds, • Regularly uses hand and finger dexterity to adjust and manipulate controls, tools, and objects, • Occasionally required to move up to 100 pounds by pushing, pulling, or sliding material. Assistance provided as needed, • Visual inspection of material quality required, • Must be able to work in hot and cold environments without climate-control., • In-person attendance is an essential function of the jobShift Schedule and Information, • Must be available to work 2:30pm - 11pm.The perks of joining our Team, • Comprehensive Insurance Options - Competitive medical coverage with a variety of plan choices., • Progressive PTO & Paid Holidays - Tenure-based paid time off plus eight paid holidays annually, • 401(k) with Company Match + Profit Sharing - Matching 5% on 6% of employee contributions and annual profit‑sharing contributions., • Career Growth & Learning Support - Tuition reimbursement and employee assistance programs., • Referral Bonus Program - Employee referral bonuses paid out over the new hire's first year., • See all benefits we offer here

Job Description Location: Houston, Texas Reports to: Manufacturing Supervisor Collaborates with: Welding, Assembly Primary Responsibility: The Manufacturing Equipment Operator is responsible for the production components to internal and customer requirements. Shift: 2nd Shift Monday - Thursday, 3:00pm - 1:30am with overtime as necessary; sometimes required. What You'll Do: • Operate equipment such as forklifts and cranes., • Prepare sheet metal for welding per specs., • To meet and/or exceed standards for safety, productivity, housekeeping, and attendance, • Interpretation of blueprints and written part requirements., • Process inspection, certification, and documentation as needed., • Read parts list and determine if all parts are present., • Interpret measurements and verify specifications., • Cut, shape metals to be prepped for the welders., • Experience operating forklifts and/or cranes., • Ability to read a tape measure, • High School Diploma., • Proven decision making and analytical skills., • Proficient in the use of tools such as tape measure, calipers, forklifts, and cranes, • Ability to work independently and complete duties and projects with little direct supervision, • Excellent verbal communication skills, • Ability to produce high quality products in a timely manner, • Must be able to lift to 50 lbs. individually and heavier items with team lift. (Beneficial Knowledge or Experience) • Experience in Fabrication What We Offer: • Health, Dental & Vision Insurance, • Annual Bonus Program, • $350 Annual Wellness Credit, • Flexible Spending Account (FSA), • 401k with match up to 5%, • Life insurance, • Disability insurance, • 4 days of paid sick leave annually, • 12 days PTO annually (prorated based on start date) Job Posted by ApplicantPro

Job DescriptionService Wire Company, a premier supplier of industrial and utility wire and cable, is currently seeking a 2nd shift Machine Operator in Houston, TX. If you are looking to join a great organization and a chance to become a part of our growing team, this may be the opportunity for you! Position Summary:Our Machine Operators perform preparation setup of production machine(s). They also operate manufacturing machinery, monitor wire quality, and record fabrication data to ensure defect-free products as defined by industry regulations and customer specifications. Additionally, they transport wire and materials throughout facility on a forklift. Service Wire is a premier manufacturer of industrial, utility, and commercial wire and cable. Our regional manufacturing location in Houston is seeking a conscientious and team-oriented Machine Operators to join our organization in this full-time position. Our Machine Operators perform preparation setup of production machine(s). They also operate manufacturing machinery, monitor wire quality, and record fabrication data to ensure defect-free products as defined by industry regulations and customer specifications. Additionally, they transport wire and materials throughout facility on a forklift. ESSENTIAL DUTIES & RESPONSIBILITIES • Prepare and setup machine for production by positioning the payoff, feeder, and take-up, • Operate the machinery by adjusting and maintaining production controls according to specifications, • Monitor the quality of wire during production and the finished product, • Perform routine lubrication of machinery parts and minor preventative maintenance, • Observe machine operation for equipment malfunction and report immediately, • Record detailed daily production data, • Maintain safety standards and clean work environment, • Additional duties as assigned by supervisor QUALIFICATIONS/REQUIREMENTS, • High School Diploma/GED (General Equivalency Diploma) or one year related industrial experience or equivalent training, • Demonstrate strong basic math and measuring skills, • Ability to read, comprehend, and respond to general instructions, direction, and correspondence, both oral and written, • Cooperatively works and interacts with members of the manufacturing department and other company employeesThis is a second shift position (2:45 pm - 11:15 pm). Tasks/Duties/Responsibilities:, • Prepare and setup machine for production by positioning the payoff, feeder, and take-up, • Operate the machinery by adjusting and maintaining production controls according to specifications, • Monitor the quality of wire during production and the finished product, • Perform routine lubrication of machinery parts and minor preventative maintenance, • Observe machine operation for equipment malfunction and report immediately, • Record detailed daily production data, • Maintain safety standards and clean work environment, • Additional duties as assigned by supervisorKnowledge/Skills/Requirements:, • High School Diploma/GED (General Equivalency Diploma) or one year related industrial experience or equivalent training, • Demonstrate strong basic math and measuring skills, • Ability to read, comprehend, and respond to general instructions, direction, and correspondence, both oral and written, • Cooperatively works and interacts with members of the manufacturing department and other company employees, • Must be able to work in hot and cold environments without climate-control., • In-person attendance is an essential function of the jobShift Schedule and Information, • Must be available to work 2:45pm-11:15pm. $1.50/hr shift differential offered.The perks of joining our Team, • Comprehensive Insurance Options - Competitive medical coverage with a variety of plan choices., • Progressive PTO & Paid Holidays - Tenure-based paid time off plus eight paid holidays annually, • 401(k) with Company Match + Profit Sharing - Matching 5% on 6% of employee contributions and annual profit‑sharing contributions., • Career Growth & Learning Support - Tuition reimbursement and employee assistance programs., • Referral Bonus Program - Employee referral bonuses paid out over the new hire's first year., • See all benefits we offer here

Job DescriptionAs a CNC Machinist, you will manage computer numeric controlled (CNC) equipment from setup to operation, producing parts and tools from different resources. The Machinist will be tasked with monitoring machinery, inspecting finished products, and leading test runs. Schedule • Set-up and manage CNC machines to perform different jobs including drilling, grinding, and milling., • Translate engineering drawings and requirements into dimensions for production., • Ensure the CNC machine operates in accordance with the guidelines of the company, • Oversee the machines while they execute the tasks and make the necessary changes to produce improved results, • Check machinery daily to guarantee functionality, • Record all machine actions by completing production and quality logs, • Communicate logistics issues that arise in the process of creating a part, • Ensure that results of machining process align with client expectations, • Conduct regular CNC machine assessments Requirements • High school diploma or equivalent qualification required, • Experience with Mazak a plus, • 1 - 3 years’ experience as a CNC Machinist, • Ability to translate mechanical documents and engineering drawings, • Great attention to detail with a goal-driven attitude, • Strong comprehension and analytical abilities, • Good computer and mathematical skills., • Able to do basic mill set ups, • Understand basic Fanuc controls, • Capable of interpreting blueprints, • Able to understand geometric signs and tolerances, • Capable of reading and using measuring instruments, • Knowledge of Algebra and math functions About NCW: At NCW, we do our best to provide the brightest talent to the best companies across the country. Founded in 2000 our company’s purpose was to redefine the way people think about contract staffing. People come first in our business. Our services are refined with in-depth expertise in our industry verticals, construction, manufacturing, warehousing & distribution, and engineering. We care about finding solutions that benefit everyone involved: our clients, our candidates, and our workforce. NCW is an Equal Opportunity Employer. Diversity and inclusion are important components of our culture and hiring practices. NCW is an employer and business partner dedicated to elevating the quality of life of our employees, clients, and communities. #TalrooCS1

Career Area: Operations Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Project Machinist Operator B Set up and operate machines and tools to perform any operation within machine capacity with special fixtures or holding devices if required. Benefits Information: • This is a supplemental position located at the Solar manufacturing facility located in Channelview, TX\n, • No relocation package is available\n, • Health, dental, vision, & basic life insurance offered on day 1 of employment\n, • Potential base salary increases from annual performance reviews\n Opportunities for Additional Premiums: • Night shift activity qualifying for another $3 per hour.\n Job Duties/Responsibilities may include, but are not limited to: • Comply with all of TurboFab's Environmental, Health and Safety Programs, Regulations and Guidelines.\n, • Must keep all areas clean and orderly; and comply with TurboFab's housekeeping procedures.\n, • Must maintain a safe working environment.\n, • Must meet production requirements.\n, • Machine components require tolerance and meet quality standards.\n, • Must apply continuous improvement techniques.\n, • Insure equipment is functioning properly.\n, • Keep and maintain records and documents as required.\n, • Train less experienced machinists as required.\n Required Qualifications: • This position is for a fully competent and qualified Machinist and Machine Operators\n, • Must have at least 1 year of experience as a machinist or machine operator and requires minimal supervision to perform the job.\n, • Knowledge of setting up and running the production machining equipment.\n, • Capable of reading and interpreting drawings.\n, • Understanding and skilled in the use of precision measuring equipment and gauges to inspect machined parts.\n, • Must have skills, knowledge in operating manual and CNC machining equipment.\n, • Able to work 2nd shift.\n, • Must exhibit the skills and willingness to perform assigned tasks in a fully competent manner.\n, • Good communication skills both verbal and written.\n Top Candidates: • High School Diploma or equivalent.\n, • 3 or more years of experience as a machinist or machine operator\n, • Basic computer skills preferred\n, • Skills of setting up and running the production machining equipment.\n, • Ability to write, change and update programs.\n, • Skills and knowledge in operating Horizontal Boring Machine as well as Kuraki CNC Machines.\n, • Competency to read/write G code as well as FeatureCAM.\n Candidates may be placed on any shift, dependent on business needs, and pay level will be determined based on experience and qualifications Summary Pay Range: $25.48 - 38.22 What You Will Get: • Competitive salary and annual bonus program\n, • Medical, dental, and vision coverage\n, • Paid time off plan (Vacation, Holiday, Sick, Etc.)\n, • Health savings account (HSA)\n, • Flexible spending accounts (FSAs)\n, • Life Insurance\n, • Employee Assistance Programs\n, • Voluntary Benefits (Ex. Accident, Identity Theft Protection)\n, • Potential base salary increases from annual performance reviews\n All eligible candidates MUST pass the following pre-employment screenings before they can be hired to any position: • Background Screening\n Please ensure you frequently check the email account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process. EEO/AA Employer. All qualified individuals - Including minorities, females, veterans and individuals with disabilities - are encouraged to apply. Summary Pay Range: $25.48 - $38.22 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. \n • Medical, dental, and vision benefits*\n, • Paid time off plan (Vacation, Holidays, Volunteer, etc.)*\n, • 401(k) savings plans*\n, • Health Savings Account (HSA)*\n, • Flexible Spending Accounts (FSAs)*\n, • Health Lifestyle Programs*\n, • Employee Assistance Program*\n, • Voluntary Benefits and Employee Discounts*\n, • Career Development*\n, • Incentive bonus*\n, • Disability benefits\n, • Life Insurance\n, • Parental leave\n, • Adoption benefits\n, • Tuition Reimbursement\n\n, • These benefits also apply to part-time employees Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Job DescriptionAuto Production Helper - 30+ Immediate openings NOW in the North Houston area!! Next Step: You now must visit our Job Fair going on NOW at 322 Spring Hill Dr Suite A100 Spring, TX 77386 get started and self-book here: Spring Food Fest Week! Join us leading up to this orientation date: • Monday – Pizza Party Kick Off, • Tuesday – Taco Tuesday, • Wednesday – Chip, Chip Hooray, Get a Job Today!, • Prepare vehicles for installation of accessories, • Assist the installers by driving up the vehicles to the corresponding lane, • Inspect vehicle to ensure it is properly prepared for the application of bed liner, • Use shop equipment and tools safelyRequirements, • Must willing to cross train in other as needed, • Must have a High School Diploma or GED, • Demonstrate mechanical skills, • Must be able to work overtime/weekends, • Must have a valid Driving License, • Must be willing to work with Inclined weather conditions, • Able to read, understand and comply with assigned area’s job instruction

Job DescriptionPipe Yard Helper | $15 an hour PLSU $1 an hour shift differential | Monday through Friday 2:00pm to 11pm What Matters Most • Competitive Pay rate $15 an hour PLUS $1 an hour shift differential, • Schedule: 200pm to 11pm; Monday through Friday, • Location: South of Downtown Houston | Sunnyside area, • Temporary-to-hire opportunity with career growth and stability, • Weekly Pay with direct deposit or pay card, • When you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401K, direct deposit and our referral bonus programJob DescriptionWe are currently seeking a motivated Pipe Yard Helper to join our dynamic team. In this role, you will assist with managing and organizing pipe inventory, loading and unloading materials, and supporting daily yard operations. If you are looking for a hands-on position where you can contribute to the efficiency of our operations and grow within a supportive work environment, we encourage you to apply. Responsibilities:, • Install strapping, bracing, or padding to prevent shifting or damage during transit., • Paint, stencil, sandblast, and coat pipes as needed., • Load and unload pipe inventory accurately, verifying heat numbers, quantities, and complete chocking., • Follow both verbal and hand signal instructions to identify and move pipes., • Report inventory discrepancies and perform additional duties as requested by supervisors or managers. Qualifications and Requirements:, • Ability to work flexible hours, including weekends (50 hours/week)., • Pass background check and drug screen., • Stable work history, preferably in an industrial setting., • Reliable transportation., • Commitment to safety and adherence to protocols., • Positive attitude and strong teamwork skills., • Ability to lift up to 50 lbs. and exert 10-20 lbs. of force regularly., • Capable of working in extreme weather and performing physical tasks. Benefits and Perks:, • Competitive Salary: $15 an hour PLUS $1 an hour shift differential - Enjoy a competitive wage that reflects your skills and experience with potential for performance-based bonuses, • Comprehensive health, dental, and vision insurance., • Generous paid time off (PTO) and paid holidays., • 401(k) retirement plan with company match., • Opportunities for career advancement and professional development., • Supportive and inclusive work environment., • Employee wellness programs and resources., • Discounts on company products and services. Your New Organization:Join a dynamic and growing leader in the pipe supply industry where your skills and contributions are highly valued. Company offers a competitive salary, comprehensive benefits, and ample opportunities for career advancement in a supportive work environment. Their commitment to employee development and a positive workplace culture makes this a great place to build your career. Discover your future with a company dedicated to excellence and growth.Your Career Partner:The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment.The base salary range for this position is $15 an hour PLUS $1 an hour shift differential, excluding benefits, bonuses, or other compensation. Your final salary will depend on your skills, qualifications, experience, location, and internal pay equity. Please note, hiring at the top of the range is uncommon to allow room for future salary growth.

Job Description About the Role The Forklift Operator is a critical role at our durable goods manufacturing facility in Houston, Texas. You will be responsible for the safe and efficient movement of materials, directly contributing to the overall productivity and operational success of the company. Schedule : 2nd Shift ( Monday - Friday : 2PM - 10PM ; Weekends as needed ) Key responsibilities include: • Operating forklifts to load, unload, and transport raw materials, finished products, and supplies., • Collaborating with warehouse and production teams to maintain smooth workflow and inventory accuracy., • Ensuring safety and adherence to all company protocols while operating heavy equipment in a dynamic environment. Responsibilities • Operate forklifts safely and efficiently to move materials between storage, production, and shipping areas., • Load and unload trucks, ensuring materials are handled with care to prevent damage., • Conduct daily inspections of forklift equipment and report any maintenance needs promptly., • Maintain accurate records of materials moved and assist with inventory management as needed., • Follow all safety guidelines and company policies to maintain a secure work environment., • Coordinate with team members and supervisors to prioritize tasks and meet production deadlines., • Assist in organizing warehouse space to optimize storage and accessibility. Minimum Qualifications • Valid forklift operator certification or license., • Minimum of 2 years experience operating forklifts in a manufacturing or warehouse environment., • Ability to work the 2nd shift schedule reliably., • Basic understanding of warehouse safety standards and protocols (Safety Compliance is essential)., • Physical ability to perform manual labor, including lifting, standing, and operating machinery for extended periods (Physical Stamina and Manual Dexterity). Preferred Qualifications • Experience in durable goods manufacturing or similar industry., • Familiarity with inventory management systems and basic computer skills., • Additional certifications related to workplace safety or equipment operation., • Demonstrated ability to work effectively in a team-oriented environment (Teamwork)., • Strong communication and problem-solving skills to coordinate with multiple departments. Our goal is to be a diverse workforce that is representative, at all job levels, of the citizens and customers we serve. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. Hood Container Corporation is a family-owned, Mill to Market company, specializing in containerboard and kraft paper, corrugated boxes, high graphic displays, and contract packaging. Our commitment to customer happiness, employee well-being, environmental stewardship, and operational excellence drive our business. Over the last decade, Hood Container Corporation has grown to become one of the top ten Paper and Packaging Companies in the United States. To learn more about Hood Container Corporation visit or check us out on social media!

Job Description Overtime as needed Local candidates only The Machine Operator is responsible for helping provide safe, efficient and reliable product and service delivery to customers, and identifying opportunities to improve service delivery. The Machine Operator ensures equipment is delivered on time and according to operational demands, and maintains shop and field equipment. Participate in pre-job and Toolbox meetings with crew members. Plan and execute maintenance activities for a designated location (outside of Technology Lifecycle Management activities). Maintain equipment according to procedures, reporting problems or deviations. Operate equipment according to procedures, competency levels and job requirement. Identify opportunities to improve the service delivery process. Participate in failure investigations when relevant. Use the guiding principles and tools of the Manufacturing System to drive continuous improvement. Other Key Responsibilities Operate custom, non-CNC manufacturing machines Assist with assembly work when not actively running machines Handle long pipe materials safely and efficiently Required Experience & Skills Machine operation experience: Preferred but not required Equipment is custom; candidates will be trained Key skills and traits emphasized by hiring manager: Strong safety mindset / prior safety-sensitive work environments Reliability and job longevity Positive attitude and willingness to learn Nice-to-have skills: Assembly experience Forklift or combilift operation Pipe handling experience SAP experience Education Required: High school diploma or GED Safety & PPE Strong safety culture is a core expectation PPE provided by the company, except: Steel-toe boots required on Day 1 Shift / Hours 2nd Shift Hours: 2:00 PM 12:30 AM Schedule: Monday Thursday Training Starts on 1st shift Interview Process In-person interviews Walk-through of the shop included Enable Skills-Based Hiring: No Worker Training Location Location Is this role bonus eligible No Is this for a Pre-identified Candidate No Please provide Pre-identified Candidate details First & Last Name: Phone Number: Email Address: Pay Rate: Is this a Casual Worker No Please enter in Shift, Shift Premiums, Hours and Rotation Specifics for this role M-TH 2:00pm-12:30am. Trains on 1st shift (4am-2:30pm) 4 to 6 weeks then move to 2nd. OT as needed

Job DescriptionThe press brake operator ensures that the machine is set up properly, functioning well, and producing quality product. He or she runs the machine and adjusts it to control speed, material feed and path of the cut. The ideal candidate embraces change, is a problem solver, an innovative thinker, and is experienced in prioritizing production runs to ensure that parts are available to meet production demands. Work hours are Monday – Friday 3:30 PM t0 12:00 AM. CORE VALUES: • Customer Focused (develop relationships, exceed expectations, treat customers like you would like to be treated), • Respect (employees, customers, suppliers, our brand), • Teamwork (collaboration, open communication, be passionate and have fun), • Results Driven (strong will to win; work to standard, not to time), • Kaizen (continuous improvement; embrace change; don't settle, share ideas)WE OFFER:, • Competitive pay, • Great benefits package, • Excellent growth opportunities, • Great work/life balance. Job Responsibilities:, • Produce parts for assembly operations., • Safely perform loading and unloading of sheet metal. Change tools and select required machine programs., • Work safely utilizing proper protective equipment and following all safety procedures. Maintain a clean and safe working environment., • Follow all inventory control procedures., • Learn other appropriate job functions and serve as back up when necessary., • Assist with machine preventive maintenance using proper lock out/tag out procedures., • Meet or exceed productivity per company standards., • Other duties as assigned by supervisor. Qualifications:, • 2-5 years’ experience on a press brake or similar machine in a manufacturing environment. Experience with Amada is a plus., • Experience in a lean manufacturing or continuous improvement manufacturing environment., • Ability to accurately use and read tape measure., • Ability to read drawings and blueprints., • Attention to detail., • Ability to lift to 50 lbs., • Repetitive work., • Standing, bending, stooping., • Several large, loud machines operating at once., • Non-air-conditioned shop, temperature conditions like the outdoors, proper ventilation exists. Powered by JazzHR bHfryDaOZq

Job Description The Forklift Operator load, unload, transfer and stack product in the warehouse, Test Rooms, lab transit test equipment, model shop work areas and trucks while meeting safety, quality, and on-time delivery objectives. These roles are also responsible for correctly processing Inventory transfers through the Engineering Lab Portal (ELP) and scanners along with entering all inventory into the ELP. Position Responsibilities may include: • Accurately process Engineering transfers., • Use tablets with ELP software (warehouse management system) for material transfers., • Utilize tablets to print labels, scan materials, and scrap materials., • Safely and efficiently operate forklifts to transfer, load and unload products., • Complete LTL (Less-than-truckload), Will Calls, and internal Engineering Lab material transfers in a timely manner., • Coordinate Scrap and Transfer trailers to and from facilities as needed., • Follow SOPs (Standard Operating Procedures) within Engineering Lab shipping and receiving team., • Ensure materials in the warehouse are properly secured, replace damaged pallets, and keep the warehouse rack lanes clear of materials., • Responsible for accurate and timely completion of paperwork at the end of each shift., • Complete daily Pre & Post shift Forklift inspection. Report any problems to the supervisor immediately., • Demonstrate always understanding and commitment to all safety and quality standards., • Attend and participate in daily safety meetings. Follow all safety procedures and policies., • Proper PPE (Personal Protective Equipment) and uniform must always be worn during each shift., • Follow Good Housekeeping - Warehouse upkeep through sweeping and keeping area(s) organized and clean., • Takes direction from lead/Supervisor., • Ability to successfully process (ex: Basic Loading and Unloading) factory transfers in a safe and efficient manner without damage and with minimal supervision., • Ability to operate a forklift safely and work in a fast-paced warehouse – Must pass in-house forklift training., • Basic computer skills – Microsoft Office, Outlook, and data entry., • Effective verbal and written communication skills., • Good organization and time management skills with ability to meet deadlines., • Ability to use good judgement and strong work ethics and integrity on the job., • Ability to effectively establish positive working relationships with employees & customers., • Ability to understand and follow all Company rules, policies, procedures and requirements especially for safety, quality, delivery and productivity/cost., • Successfully process engineering transfers., • Learn ELP and inventory scanning systems., • Good Warehouse Management practices., • Learn label change processes., • Perform ELP/Inventory self-audits., • High School diploma or GED Physical Requirements / Work Environment • Capable of working eventually in outdoor weather and environmental conditions including extreme heat and humidity, and extreme cold in the Houston area., • Lifting and carrying awkward objects up to 50 lbs., • Standing for extended periods of time per day., • Moving the entire body. Considerable use of arms, legs, climbing, lifting, balancing, walking, stooping, crawling, twisting, reaching, and bending on a regular basis., • Ability to frequently mount and dismount forklifts and cranes., • Must have good hand-eye coordination. The Company provides equal employment opportunity to all employees and applicants regardless of a person’s race, color, religion (including religious dress or grooming practices), creed, national origin (including language use restrictions), citizenship, uniform service member or veteran status, ancestry, disability, physical or mental disability (including HIV/AIDS), medical condition (including cancer and genetic characteristics), genetic information, request for protected leave, marital status, sex, pregnancy, age (over 40), sexual orientation, gender, gender identity or expression, political affiliation, or any other characteristic protected by law. The Company will comply with all federal and state regulations and statutes pertaining to individuals with disabilities.

Job Description Apply Today, Work Today Weekly Pay Job Description: We are Hiring Immediately for a Forklift Operator - Reach Truck position! Shift: 1st and 2nd Pays: $18/hr · Unload materials and merchandise from incoming vehicles and stack them to assigned places · Locate and move stock of products to pallets or crates for storage or shipment · Identify damages and report shortages or quality deficiencies · Transport raw materials to production workstations · Inspect machinery to determine the need for repairs and guarantee safety by performing regular maintenance · Keep updated records of inventory and activity logs · Comply with company policies and legal guidelines · Help maintain a safe and orderly environment of the facilities Skills · Proven experience as forklift operator or Reach Truck · Attention to detail and familiarity with industrial equipment · Excellent physical condition and coordination · Valid certification to operate forklifts · High school diploma · Spanish Job Requirements: • Ask about our Employee Rewards Program, • May be required to lift up-to 25lbs, • May be required to perform repetitive motions, • Must have reliable transportation, • Must be able to work in a team environment Additional Information: • Ask about our Employee Rewards Program, • Benefits include medical insurance, dental insurance, vision insurance and life insurance, • Some positions may not require background check or drug test Full-time, Part-time $18.00 / hr Shifts Available: • 1st Shift, • 2nd Shift, • 3rd ShiftFor this or other positions in your area. LI23 LILive24 Company DescriptionPartnering with a retirement planning company for a full time role.Partnering with a retirement planning company for a full time role.

Shift: 2nd Shift: 2pm - Finish; 3rd Shift: 10pm - Finish Compensation: $500 - $1,200 paid weekly Missouri City, TX 2nd Shift: 2pm - Finish ; 3rd Shift: 10pm - Finish Pay: $500-$1,200 / Weekly People want to work at Capstone because of our high-performance culture.We build strong relationships, chall

Shift: 1st shift (6am start) 5 2nd shift (5pm start) or 3rd shift (9:30pm stat) Compensation: $14.People want to work at Capstone because of our high-performance culture.We build strong relationships, challenge the status quo, work hard to deliver results, and pay it forward in our communities.Throu

Shift: 2nd shift: 2pm - 10pm Compensation: $70,000+/year Missouri City, TX Pay: $70,000+/year 2nd Shift: 2pm-10pm Sunday - Thursday Operations Manager We are looking for a Warehouse Operations Manager to join our team and be part of something great. Ability to train, coach, and mentor warehouse asso

Overview & Responsibilities Overview: To recommend and implement repairs for industrial and rotating equipment, including but not limited to compressors, turbines, and other equipment. Has limited ability to document, erect, alter, install, align, repair, replace, disassemble, and reassemble, move and inspect most rotating equipment. Able to perform work in a safe and timely manner. Requires supervision most of the time. The below reflects general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Responsibilities: \n • Promotes safety and quality at all times.\n, • Able to work in a team environment.\n, • Maintain a clean and organized work area.\n, • Conducts themselves in a professional manner at all times when working with internal and external customers.\n, • Ability to read and comprehend drawings, sketches, work scopes, and verbal instructions.\n, • Uses appropriate equipment, tooling, drawings, work scopes, procedures, specifications and documentation to perform the primary function.\n, • Able to learn the processes for repairs including altering and overhauling of rotors, turbines, disc and blade holders, shafts, sleeves, gears, couplings, and all other forms of equipment needed to complete jobs.\n, • Able to learn how to set up equipment needed to complete jobs.\n, • Able to learn to accurately measure and record all dimensional inspections as needed using proper measuring devices.\n, • Able to pass the annual dimensional inspection test.\n, • Able to understand inspection reports and work with customer witnesses.\n, • Able to understand and process documentation associated with turbo machinery such as inspection reports, photo logs, and hold tags.\n, • Knowledge of lifting, rigging, crane and forklift operations.\n, • Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.\n, • Accepts ownership over work performance and stays abreast of job knowledge and new skill development.\n\n Qualifications: \n • High School Diploma or Equivalency\n, • 3-5 years' experience with rotating turbo machinery\n, • Rigging capabilities\n, • Measuring capabilities\n, • Experiences with turbines, compressors and/or other rotating equipment\n, • Rotor specific skills are a plus, axial measurements, ODs, ROs\n\n Equal Employment Opportunity Ebara Elliott Energy is an equal employment opportunity/affirmative action employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, marital status, genetic information, disability, veteran status, or any other characteristic protected by the federal, state or local laws of the United States. Applicants and employees are protected under U.S. federal law from discrimination. To learn more, click here. To learn more about our Job Applicant Privacy Notice, please click here. No agency submissions please. NOTE: Resumes submitted to any Ebara Elliott Energy employee without a current, signed and valid contract in place with the Ebara Elliott Energy recruiting team will become the property of Ebara Elliott Energy and no search fees will be paid.

Job Description Job Overview: • Operates manufacturing machines & equipment related to the production of downhole components., • Night shift (5pm-5:30am) Responsibilities: • Metal preparation by sandblasting, grinding, and fabricating., • Applying adhesives and operating rubber injection machines., • Heavy lifting may be required and standing for a long period., • Documents and records data in assigned work area., • Ensures that finished product meets company quality policy., • Ensure all PPE (personal protection equipment) is used., • May require frequent lifting from 25-50 lbs. Education: • High School Diploma, GED, or equivalent., • 1-2 years related experience or training Experience: • Ability to perform a variety of tasks., • Must have a safety and quality mindset., • Experience operating forklifts and overhead cranes., • Ability to manage time effectively and good organizational skills., • Familiar with practices and procedures in a manufacturing facility., • Ability to read and comprehend written instructions and blueprints., • Ability to maintain a good working relationship with others. Skills: • Effective verbal and written communication skills, • Basic math skills that include add, subtract, multiply, and divide., • Computer skills; Microsoft Word and ExcelCompany DescriptionWith over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.

Job Description Full time opportunities with a growing manufacturing company with operations across the United States has immediate openings at their East Houston facility. Company offers comprehensive benefits package, safe - rewarding work environment and opportunity for professional growth. Candidates should have experience working with steel or machine operation. Pay: $21 Hourly Shift: Training on day shift - then 2nd or 3rd shift Location: Houston, TX 77015 These positions will work within a fabrication / shop environment around large equipment and machinery helping to press, mold, and cut steel material. You will be responsible for loading, setting up, and fully operating the machines. Job Requirements • At least 5 years of industrial machine operation preferred, • Willingness to be trained on new machinery to build knowledge in an area with excellent growth potential., • Motivated and eager to learn all details within this specialized repair discipline., • Physically able to perform the mechanical duties required which includes lifting as much as forty-five to fifty pounds.

JOB DESCRIPTION We are seeking a skilled Machinist (2nd shift) professional looking for an opportunity to grow, Emerson has an exciting opportunity for you! Based in our Stafford, Texas location, you will have a strong understanding of machine tools and manufacturing processes. This position requires precision, attention to detail, and the ability to work independently. In This Role, Your Responsibilities Will Be: \n • Responsible for the fabrication of fixtures, jigs, brackets and other parts, including welding, grinding, tapping, forming, deburring, and inspection for conformance to requirements.\n, • Detects equipment malfunctions or out of tolerance machining and adjusts machine, within capabilities, controls or control media as required to insure quality or production. Reports all machine malfunctions to immediate supervisor.\n, • Read and interpret blueprints, drawings, and specifications.\n, • Set up and operate machine tools to achieve desired tolerances and finishes.\n, • Measure and inspect finished products to ensure quality standards are met.\n, • Responsible for keeping equipment and work area clean and clean and orderly and perform basic preventative maintenance functions on equipment.\n, • Follow safety guidelines and procedures.\n, • Collaborate with other team members to complete projects.\n, • May perform other duties as assigned by supervisor\n, • Assist with training others on equipment when necessary\n\n For This Role, You Will Need: \n • High School Diploma or equivalent\n, • 3 or more years of experience setting up and operating manual machines such as lathes and milling machines in a manufacturing setting\n, • Strong mechanical aptitude and problem-solving skills\n, • Knowledge of various machining techniques and tools .\n • Willing to run multiple machines independently or in a team environment.\n, • Strong analytical, mechanical and problem-solving skills.\n, • Must be able to lift 40 lbs.\n, • This position requires the ability to read, understand, and communicate in English at a level necessary to safely and effectively perform essential job duties. This includes:\n, • Reading and interpreting work orders, safety instructions, machine manuals, and technical drawings written in English\n, • Understanding and following verbal and written safety communications\n, • Communicating with supervisors and team members regarding production needs, equipment issues, and safety concerns\n, • Completing required documentation, logs, and quality‑control records in English\n\n\n\n Preferred Qualifications That Set You Apart: \n • CNC set ups and operation experience preferred. \n, • Knowledge of programming and operating CNC machines\n, • Experience with precision measuring instruments\n, • Mazatrol or Fanuc Controllers\n, • Toyoda, Hyundai or Mazak experience\n, • Skilled in reading drawings and specifications with an intermediate understanding of geometric tolerance and dimensions.\n, • Knowledge of tool holders, cutting tools, boring bars, fixtures, inserts, and other accessories used on various machines.\n, • Must be adaptable to a changing work environment and able to deal with competing demands.\n\n Our Culture & Commitment to You: We recognize the importance of employee wellbeing and know that to do your best you must have flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide, a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture prioritizes work-life balance and offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. At Emerson, we are committed to fostering a culture where every employee is valued and respected for their unique experiences and perspectives. We believe a diverse and inclusive work environment contributes to the rich exchange of ideas and diversity of thoughts, that inspires innovation and brings the best solutions to our customers. This philosophy is fundamental to living our company's values and our responsibility to leave the world in a better place. Learn more about our Culture & Values and about Diversity, Equity & Inclusion at Emerson. Our training programs and initiatives focus on end-to-end development, from onboarding through senior leadership. We provide a wide range of development opportunities, including face-to-face and virtual training, mentorship and coaching, project management, and on-the-job training. ABOUT US WHY EMERSON Our Commitment to Our People At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. Work Authorization Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. Accessibility Assistance or Accommodation If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: [email protected]. ABOUT EMERSON Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! No calls or agencies please.

DOVER PRECISION COMPONENTS: Dover Precision Components 'DPC' ('the Company') is part of Dover Corporation's ('the Parent Company') Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently. WE DELIVER CUSTOMER SUCCESS Dover Precision Components delivers products and services that enhance performance, improve safety, reduce carbon emissions, and accelerate clean energy adoption, through collaborative customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China. BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES. We are diligent in recognizing our employees' needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We are Dover Precision Components, #LifeAtDPC Summary: The Manual Machinist II will set up and operate manual machines, primarily lathe manual machines. The hours for this role are: 2:00 pm-10:30 pm, Monday - Friday. • Read, process sheets, blueprints, and sketches of part to determine machining to be done, dimensional specifications, set up, and operating requirements., • Interpret work instructions, • Identify, select and install proper tooling for operations being performed, • Calculate proper feeds and speeds for a variety of steel grades, copper, brass, aluminum and bronze, • Intuitively understand capabilities of tooling and machinery, • Apply principles of Lean Manufacturing to reduced setup times and improve productivity, • Actively participate in daily Continuous Improvement activities\nMinimum required qualifications:, • Prior experience with precision inspection equipment including, but not limited to, micrometers, calipers, height gauges, bore gauges, • 5+ years experience with manual machines-- lathe and mills, • Prior GD&T knowledge, • Prior experience with rotational equipment a plus. Ideally, both Lathe and Mills or split parts, • Proven ability to hold tight machining tolerances of less than .001"\nMental/Visual/Physical Effort:, • The employee is regularly required to stand and talk or hear, • occasionally required to walk; sit; use hands to finger, handle, or feel; and taste or smell, • must frequently lift and/or move up to 50 pounds, • Regularly exposed to moving mechanical parts, • Occasionally exposed to fumes or airborne particles and vibration, • The noise level in the work environment is usually loud\nWe offer a employee referral bonus of $2,000 for current employee and $1,000 for referred employee. Subject to conditions of referral bonus program. The ideal candidate possesses the following experience, skills, and abilities: *Note: This Job Description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by the Supervisor. All requirements are subject to change and updates. In this role you will be working with various machinery an metalworking materials in a machine shop environment including but not limited to: cutting fluids, lubricants, and metal shavings. You will be required to wear appropriate PPE such as safety glasses, steel toe boots, hearing protection, gloves, and adhere to all safety procedures. We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. Benefits: Our total rewards package for eligible team members also includes: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact [email protected] assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response. Nearest Major Market: Houston Job Segment: Environmental Engineering, Machinist, Metallurgy, Industrial, Inspector, Engineering, Manufacturing, Quality

PRIMARY RESPONSIBILITIES • Comply and maintain safe operations by adhering to NOV safety policies and procedures., • Setup, program, and operate CNC machines under minimal supervision., • Work as a team player with others in a demanding, fast-paced environment to meet frequently changing production., • Carry out job requirements in accordance with established procedures and specifications while meeting established company production goals., • Responsible for keeping equipment and work area clean, organized, and orderly. Perform basic preventative maintenance functions on equipment.\n EDUCATION & EXPERIENCE QUALIFICATIONS • High school diploma or equivalent required., • Minimum of 3 years' experience operating CNC machines such as lathes and milling machines in a heavy manufacturing environment., • Experience setting and running a slant bed lathe and vertical mill utilizing FANUC machine controls would be a distinct advantage., • Advanced knowledge and application of precision measuring instruments and the application of such instruments. Instruments should include but not limited to calipers, ID and OD micrometers, depth gages, indicators and scales., • Intermediate knowledge of reading drawings and specifications with an intermediate understanding of geometric tolerancing and dimensions., • Intermediate knowledge of tool holders, cutting tools, boring bars, fixtures, inserts and other accessories used on various machines., • Must be able to operate a forklift and lifting devices for movement of parts, or willing to gain certification., • Must be able to follow written and oral instructions., • Must be able to communicate in English (both written and oral) as it relates to the job., • Must be adaptable to a changing work environment, competing demands and is able to deal with frequent change, delays or unexpected events., • Must be willing and able to work flexible shifts and changing work schedules., • Must possess basic math skills to include but not limited to adding, subtracting, multiplication, division, geometry and algebra for the purpose of calculating material fabrication.\n JOB REQUIREMENTS • You will be required to wear PPE (personal protective equipment) such as gloves, clothing, safety glasses/goggles, ear plugs/muffs and safety shoes continuously for the duration of the work shift., • Work potentially will be performed in areas where harmful physical and chemical agents are present (e.g., fumes, dust, heat, ionizing and non-ionizing chemicals). Per HSE requirements, you could be required to participate in medical surveillance programs., • Must be adaptable to a changing work environment, competing demands and is able to deal with frequent change, delays or unexpected events., • Must be willing and able to work flexible shifts and changing work schedules, however this position will be primarily 2 nd shift. \n COMPETITIVE BENEFITS (visit usbenefits.nov.com for more information about our benefits offerings) • 401(k) Retirement Plan - NOV matches every dollar up to 4% of base pay and overtime for every dollar you invest, • Competitive medical plans that are effective on your date of hire. Coverage options for yourself as an eligible employee start as little as $40 per pay period (bi-weekly), and plans that cover your entire family (yourself, eligible spouse, and eligible children) start at $150.50 per pay period (bi-weekly)., • Starting in 2026, FREE MDLIVE virtual visits (when enrolled in an NOV medical plan)., • FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician), • FREE Basic Life and AD&D insurance (for full-time employees) at 2 times your annual salary (for full-time employees), • All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). Pre-NOV relevant experience (years of service) may be considered for additional vacation accruals., • All regular full-time employees receive up to 11 paid holidays per year

Machine Shop Operator - 2nd Shift Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities \n • Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program.\n, • Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed.\n, • Review parts program file and select set tools in tool holder, turret, or cross slide location.\n, • Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required.\n, • Unload bar stock from delivery truck with overhead crane and place in intermediate storage area.\n, • Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications.\n, • Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear.\n, • Indicate work to detect and eliminate run out.\n, • Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism.\n, • Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor.\n, • Maintain workplace in neat and orderly condition.\n\n Qualifications/Requirements \n • GED or High School Diploma\n, • 1 - 2 years Manufacturing Experience\n\n Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

Overview & Responsibilities Overview: To perform most complex setups and machine a variety of components on a variety of machine tools. Able to perform work in a safe and timely manner to meet customer needs. Ability to work extremely close tolerances. Ability to layout and plan machining operations from prints, sketches or verbal instructions with limited supervision. The below reflects general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Responsibilities: \n • Promotes safety and quality at all times.\n, • Maintain a clean and organized work area.\n, • Conducts him or herself in a professional manner at all times when working with internal and external customers.\n, • Advanced knowledge of machine equipment and machining operations of various machines: horizontal and vertical lathes, layout machines, vertical boring mills, horizontal mills, grinders, deburring tools, fixtures, radial and angular drill press, forklifts, cranes and various forms of rigging, jib hoists, personal computers, and other required tools necessary to perform the job.\n, • Advanced knowledge and accuracy in using various measuring devices: micrometers, indicators, calipers, gauges, and other required tools necessary to perform the job.\n, • Full understanding of use for tooling, drawings, work scopes, procedures, specifications and documentation to perform the primary function of the job.\n, • Performs most complex setups and machine tool operations. This includes turning, boring, facing, milling, drilling, reaming, tapping, sawing, slotting, grooving, grinding, and other required actions to complete the job.\n, • Ability to work to extremely close tolerances.\n, • Ability to read and comprehend drawings, sketches, job scopes, and verbal instructions.\n, • Maintains equipment by completing basic preventive maintenance requirements and notifying the appropriate representative for troubleshooting and repairs.\n, • Able to accurately measure and record all dimensional inspections as needed and pass annual dimensional inspection tests.\n, • Ability to complete layouts of most parts.\n, • Ability to train other employees in operation of equipment, reading prints, selection of tooling and machining equipment, along with repair processes.\n, • Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.\n, • Documents actions by completing production and quality logs.\n, • Accepts ownership over work performance and stays abreast of job knowledge and new skill development.\n\n Qualifications: \n • High School Diploma or Equivalency\n, • 5-8 years' experience with rotating turbo machinery\n, • Advanced rigging capabilities\n, • Advanced machining capabilities on manual lathes\n, • Experiences with turbines, compressors and other rotating equipment\n\n Equal Employment Opportunity Ebara Elliott Energy is an equal employment opportunity/affirmative action employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, marital status, genetic information, disability, veteran status, or any other characteristic protected by the federal, state or local laws of the United States. Applicants and employees are protected under U.S. federal law from discrimination. To learn more, click here. To learn more about our Job Applicant Privacy Notice, please click here. No agency submissions please. NOTE: Resumes submitted to any Ebara Elliott Energy employee without a current, signed and valid contract in place with the Ebara Elliott Energy recruiting team will become the property of Ebara Elliott Energy and no search fees will be paid.

Advance Services Inc - 10910 Spencer Highway - Responsibilities: Clean and wipe oil off the top of drums; Assist with other warehouse duties; Maintain a clean and organized workspace; Support production activities as needed.

Sims Metal - - Responsibilities: Load and unload materials manually or with the use of a forklift; Sort and separate metals (e.Assist with preparing scrap materials for shipment; Maintain cleanliness and organization of the work site; Follow proper safety procedures and wear required personal prote

ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond.For more information about Enovis, please visit ___. What You'll Do AtEnovis wepay attention to the details.We embrace collaboration with our partners andpatients, andtake pride in the pursuit ofscientific excellence - with the goal of transforming medical technology as we know it. Becausethat'show we change the lives of patients for the better. Andthat'show we create better together. Why work atEnovis? ___ As a key member of the Foot & Ankle Operations team, you will play an integral part in helping Enovis drive the medical technology industry forward through transforming patient care and creating better patient outcomes. Job Title: Swiss Machinist - 2nd Shift (Evergreen) Reports To: Supervisor, Manufacturing Location: Houston, TX Business Unit Description: Enovis Foot & Ankle Job Title/High-Level Position Summary: The Foot & Ankle division is a growing and dynamic team that is looking for a motivated candidate that is willing to jump start their career. The successful candidate will perform various activities to manufacture orthopedic products. These activities include, but are not limited to, assignment planning, layout, set up, operating and making tool adjustments for various types of manual, numerically controlled and computerized machine shop equipment. Key Responsibilities: • Plan machining by studying work orders, blueprints, engineering plans, materials, specification, orthographic drawings, reference planes, locations of surfaces, machining parameters; interpreting geometric dimensions and tolerances (GD&T), • Start and observe machine operation to detect malfunctions or out-of-tolerance machining, and adjust machine control or control media as required, • Verify conformance of finished workpiece to specification, using precision measuring instruments such as micrometers, calipers, and coordinate measuring machine (CMM), • Operates equipment within a cell with multiple machines to produce high quality parts within prescribed routed time to meet production demands, • Changes inserts/tools and makes the necessary offsets to continue to make parts per blueprint and process specifications, • Maintains equipment via established preventative maintenance schedules, • Follows all prescribed quality procedures and inspection plans, • Performs 1st piece inspections and monitors own work to meet process requirements including fully documenting inspection reports developed by the Quality department, • Verifies that the inspection equipment being utilized is in calibration and performs a simple daily check against a known master to ensure the accuracy of the gage to be used, • Follows supervisor's direction to troubleshoot problem processes, interfacing with Manufacturing Engineers if necessary, • Ability to solve inspection problems and develop new approaches, • Works from blueprints, process sheets and sketches to perform production tasks, which may include the cutting and shaping of metal to precision dimensions, • Communicates directly with engineers to understand the purpose of a part assembly, • Checks and inspects machining operations against specified tolerances, • May identify and repair minor machine malfunctions, • Promptly and accurately completes all required recordkeeping, • Keeps surrounding area clean, safe and organized, • Responsible for keeping all labor hours with time system accurately, • Any additional duties as assigned Currently,Enovisdoes not provide sponsorship for employment visas (e.g., H-1B) and will not offer such sponsorship in the future. Applicants must already have full-time work authorization in the United States, both now and in the future, without requiring sponsorship. Minimum Basic Qualifications: • HS Diploma or equivalent, • CNC Lathe with live tooling, • Must be able to read and interpret documents such as drawings and routings, safety rules, operating and maintenance instructions, and procedure manuals, • Must be able to use micrometer, drop indicator and dial/digital caliper, • Ability to communicate clearly, professionally and effectively with management, co-workers and other departments Desired Characteristics: • CNC programming skills, • One (1) to two (2) years' experience on a swiss machine Safety/Physical Requirements • Frequent to constantuseoftheir hands and fingers, to handle or feel,and to manipulatein a variety of different body positions or postures, • Frequent to constant holding, grabbing, grasping, pinching, turning or otherwise working with hands and fingers ranging from dexterous to forceful in nature, • Frequent to constant lifting or exertion of force of up to 35 lbs,occasionally up to 50 lbs, • The employee isconstantly or frequently required to stand, walk, reach with arms and hands,frequently to climb or balance, and to stoop, kneel, crouch or crawl, • Vision abilities required by this job include close vision, ability to judgedimensionsand spatial relationships "Creating better together". It's the Enovis purpose, and it's what drives us and empowers us every day on a global scale. We know that the power to create better - for our customers, our team members, and our shareholders - begins with having the best team, pursuing common goals, operating at the highest levels, and delivering extraordinary outcomes. What does creating better together mean to us atEnovis? Discover the "why" behind our purpose,valuesand behaviors: We offer a comprehensive benefits package which includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Spending and Savings Accounts, • 401(k) Plan, • Vacation, Sick Leave, and Holidays, • Income Protection Plans, • Discounted Insurance Rates, • Legal Services ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond. Visit ___ to learn more. EQUAL EMPLOYMENT OPPORTUNITY: Enovis provides equal employment opportunities based on merit, experience, and other work-related criteria and without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees' beliefs and practices that do not conflict with Enovis policies and applicable law. We value the unique contributions that every employee brings to their role with Enovis. #LI-RC2 EOE AA M/F/VET/Disability Statement All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, religion, color, national origin, sex, protected veteran status, disability, or any other basis protected by federal, state or local laws.

Location(s): Houston, TX, US, 77029 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68731 Maintenance Mechanic 2nd Class Job Description Job Title:Maintenance Mechanic 2nd - Class Department:Maintenance Reports to:Maintenance Leader Pay: $35.34 Supervises:N/A FLSA Status:Non-Exempt Date:9/18/23 SUMMARY The purpose of the2nd class mechanicisto perform as professional, highly skilled and exceptionally competent maintenance person. Participates in teams to develop and implement solutions. JOB DUTIES AND RESPONSIBILITIES PRINCIPAL DUTIES AND RESPONSIBILITIES: Plant and Environmental Safety • ___Lives the Owens Corning Safety Stand and meets all safety requirements. Safety is a condition of employment., • Take personal ownership to work safely and hold other team members to the same high standards of safety, • Notify supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem., • Participates in the safety, quality, autonomous maintenance, TPM and housekeeping programs as established within the plant; including but not limited to Focused Improvement Events, Safety Committee, Training, etc., • Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal., • Complies with all plant rules and safety regulations., • Performs cleanup duties at workstations and/or equipment/machinery., • Communicates safety concerns and/or equipment problems/abnormalities to appropriate personnel, maintaining strong communication with the appropriate line section operators to ensure immediate action is taken for product out of spec., • Inspect vehicles before use and throughout shift, keeping all equipment clean and operational. TPM • Participates in plant TPM initiatives - completing activities associated with TPM tasks (adheres to CILT standard, 5S)., • Continues to use TPM methodology to gain a better understanding of the equipment., • Identifies and participates proactively in learning opportunities and develops expertise in those areas., • Utilizes Focus Improvement tools to problem solve., • Works to achieve zero injuries, zero defects and zero losses., • During PM days, uses time effectively to bring equipment to optimal condition for zero losses., • Maintain DM and Step Boards. Maintenance • Energy Control Procedures (ECP's) and Lock Tag Try (LTT) system. Respect for the potential hazards within the manufacturing operation. Training and regular auditing of the process., • Fluent in the language of the plant., • Computer literacy - email, simple spreadsheet, word doc., • Safe rigging procedures., • Forklift operation, licensed - will provide certification., • PLCintermediate -- Ability to use laptop for troubleshooting and see what limit switch or photo eye isn't working and ability to adjust where needed. Internal various timers in the program; the ability to access status files to diagnose and clear PLC faults., • Intermediate troubleshooting, how to analyze a problem and step to the root cause. Help reduce cycle time to problem resolution and eliminates the "replace and see what happens method" with little to no direction., • Understand what it takes to consistently manufacture our products. Critical product characteristics, key process variables, customer needs etc., • Business 101 - World Class Manufacturing (WCM) concepts, what are they, individual and business benefits. Key business metrics and focus., • Installs, modifies or maintains plant equipment and assists in determining appropriate methods to accomplish these tasks., • Must work safely and follow all documented and "common sense" safety policies and procedures., • Read, understand, and analyze blueprints and other technical data references., • Expert use of hand and power tools., • Inspects plant equipment to identify potential problems prior to breakdown occurrences., • Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion., • Follows all environmental compliance polices & programs., • Work as instructed with outside contractors. Mechanical • Basic understanding of machining bores, keyways, drill press, grinding; lathe and mill operation., • Ability to properly precision align belt, gear or direct coupled shafts using proper tools to specified tolerances., • Understanding of lubrication principles and bearing tolerances and bearing physics-I.E. how does it work in terms of need for extreme care, keeping clean, etc., • Hydraulic systems understanding - hydraulic flow principles. Effects of pipe sizes and valves on pressure drops, making proper fittings per system requirements, proper valve application, etc. Applied to water systems, hot oil, and hydraulic systems., • Same as above for compressed air and steam, (where applicable) systems., • Understanding of pump and operating characteristics including effects of suction pressures, head pressures, sealing/packing techniques., • Ability to track conveyor belts properly and understanding the physics of belt operation and tracking including bucket elevators; belt splicing., • Ability to read air and power fluid schematics., • Welding for all; structural and piping welding for at least one craft per plant., • Pipefitting - alignment, flange, threading., • Electrical component "how they work" understanding: solenoids, motors, heaters, contacts, and photoeyes., • Ultrasonic rotating equipment troubleshooting. Electrical • Industrial electrical code., • Capability to read schematics and P&ID drawings., • Fusing, thermal overload protection, wire sizing, motor theory, etc., • AC/DC and Servo drive system., • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc., • Ability to fully troubleshoot AC/DC variable frequency drives, and communicate technically with outside technical support when needed., • Ability to fully understand the various control loops in the plant including IM/APC systems and weight control equipment., • Competent in electrical noise avoidance-grounding, shielding, etc., • Burner system understanding, troubleshooting and properly tuning Other • ___Demonstrate the ability to effectively communicate., • Support the training and development of colleagues., • Demonstrates flexibility to changing priorities as business needs dictate., • Identifies and participates proactively in learning opportunities, and develops expertise in those areas., • Follows standard operating procedures and processes., • Can and is willing to make decisions. Knows the chain of command to get support., • Regular attendance on site and the ability to rotate varying shifts., • All other duties as assigned or needed. ___JOB REQUIREMENTS SKILLS AND ABILITIES The employee should hold the following skills and abilities: • ___Demonstrated desire to impact safety, • Must be able to work independently or in a team atmosphere with minimal direct supervision, • Demonstrated mechanical aptitude and the ability to troubleshoot, • High attention to detail, • Demonstrated ability to multi-task, • Basic mathematics skills, • Able to effectively communicate (read, write, speak, understand) English, • Electrical, • PLC, • Hydraulic, • Pneumatics, • Blueprint & Schematic reading, • Proficient in SAP PM Module ___COMPUTER AND SOFTWARE COMPENTENCIES The employee must be able to: • Work with a computer to perform basic data entry, • Demonstrate basic computer skills such as___Microsoft Outlook, IVC and SAP. EDUCATION AND/OR EXPERIENCE • High School Diploma or GED Equivalent required., • Manufacturing or process related experience preferred., • Preferably five (5) years in a related maintenance trade or occupation that involved electrical, hydraulic machinery and equipment in a manufacturing environment., • Able to demonstrate trouble-shooting techniques and have a basic understanding of blueprints., • Basic ability and knowledge of welding practices and hydraulic circuitry., • Advanced understanding of electrical circuitry., • Basic PLC knowledge., • Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form., • Flair for working with large industrial machines., • Must be able to work independently or in a team atmosphere with minimal direct supervision with drive toward accomplishment, and to produce high quality work. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • ___Must remain drug free, • Exposure to dust/dirt/fumes/fiberglass, • Ability to work in wet environments: including head and feet, • Industrial manufacturing environment with extreme temperature variation, • Exposure to sounds or noise levels that maybe uncomfortable (hearing protection is provided), • Ability to wear applicable PPE for up to 12 hours, • Ability to distinguish colors and shading, • Ability to become certified to operate a forklift, • Prolonged sitting, standing, or walking for 8 - 12 hour shifts, • Bending and twisting; repetitive movements, • Able to do repetitive hand, arm, leg movements for up to 12 hours, • Must be able to squat, bend at the waist and knees freely, • Be able to climb up to three floors or stairs, use full upper body movement for process; stand up to 12 hours with breaks, • Ability to work from heights, • Lift, push and pull 40lbs.repetitively, • ___Handle, control, feed, or feel objects, tools or product, • Must be able to work flexible rotating shift schedules - mandatory overtime as required This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Nearest Major Market: Houston

Job Description Overview Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Location: Houston, TX Pay Rate: $38.08 Hourly Schedule: 12-hour shift, 2nd shift 5pm to 5:30am, Monday - Friday Ability to work holidays and weekends per business needs Benefits of working for Primo Brands: Health Benefits: Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA), health savings account (HSA) Retirement/Investing: 401K with a 5% match, Employee Stock Purchase Plan (ESPP) Insurance: Employee Life Insurance, short and long-term disability, critical illness, hospital indemnity, accident insurance, spouse/domestic partner/child life insurance, accidental death and dismemberment Other great benefits: Employee discounts, save on auto, home, and pet insurance, tuition reimbursement, paid vacation and sick time, 9 paid holidays and 3 paid floating holidays, paid leave for when you have a baby, adopt a child, or become a foster parent, legal services, identity theft protection, employee assistance program (EAP), adoption reimbursement benefit, FEDlogic, commuter benefits Responsibilities • Restoring machine to operating conditions during machine runtime failure in a team setting, • Complete reactive maintenance on production lines to recover from equipment failures by repairing mechanical, electrical, and structural components, • Create retrofits and fabrication, complete machine tear down/repair and assembly and work on PLC’s, VFD’s, and electric motors, • Conduct creative problem solving to identify and perform equipment improvements, • Participate in special project work on equipment upgrades or installations, • Work with team members and operators to ensure the daily production schedule is met, • Plan, lead and execute preventative maintenance (PM) according to PM schedule to minimize equipment downtime, • Maintain partnerships with team members and vendors using effective communication, • Provide break relief to production operators or team members as needed, • Operate a forklift as needed to complete duties Qualifications • High school diploma or GED; additional technical training or certifications desired, • 3 or more years of previous experience in an industrial manufacturing environment, • Demonstrated sense of urgency in completing tasks and comfort working in a high-speed production environment, • Strong mechanical and electrical skills; PLC experience a plus, • Solid computer skills, including the use of Word, Excel, Outlook, SAP desired, • Experience with CMMS or ERP systems needed; SAP experience preferred, • Ability to work independently or with a team and communicate effectively, • Solid problem solving and decision-making skills with the ability to coach others, • Able to move/handle 50 lbs. as needed while performing work, • Able to work with an awkward posture for 2 hours or more, • Ability to successfully complete an online skills assessment prior to onsite interview Primo Brands’ established portfolio includes billion-dollar brands Poland Spring® and Pure Life®, premium brands like Saratoga® and Mountain Valley®, regional leaders such as Arrowhead®, Deer Park®, Ice Mountain® Ozarka®, and Zephyrhills®, purified brands, Primo Water® and Sparkletts®, and flavored and enhanced brands like Splash® and AC+ION®. Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

Job DescriptionMain Function: • Inspection and maintenance of engineering test equipment, tools, and server room assets., • Coordination of testing processes with active participation (e.g. setting up new stations, prioritizing tasks, product testing)., • Active involvement in the repair and fault analysis of failed test products., • Manual and electronic data recording., • Production support and collaboration with test engineers.Duties and Responsibilities:, • The Test Technician is responsible for supporting the production line., • Providing the Engineering Department with relevant information as needed (any issues must be reported to the direct supervisor and Engineering)., • Performing additional installation tasks., • Monitoring of server operations., • Timely notification to Engineering about the depletion of spare parts., • Decision-making authority:, • Responsible for maintaining the quality of the tasks and processes listed in the job description., • Authorized to carry out routine maintenance, testing, and installation tasks without prior approval, in accordance with established procedures and work instructions., • Permitted to escalate technical issues and suggest process improvements directly to the Engineering teamQualification and Experience:, • Minimum of secondary education., • Proficiency in technical English., • User-level knowledge of Microsoft Office and Microsoft operating systems (including Windows 10, Windows Server 2012 R2, and Windows Server 2016).Primary Skills:, • Knowledge of computer networks., • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Vision insurance, • Paid holidays Powered by JazzHR hEiAz1pa6h

Job DescriptionFoxconn Industrial Internet (Fii USA, Inc.) is seeking a Forklift Operator to support its warehouse and manufacturing operations. This role is part of the Warehouse Department and is critical to maintaining efficient material handling and inventory accuracy The Forklift Operator will transport materials safely, maintain inventory accuracy, and perform equipment inspections while assisting the Warehouse Department as needed. Current open shifts: 1st shift- 6:00am-2:00pm 2nd shift- 2:00pm to 10:00pm 3rd shift- 10pm-6am Job Responsibilities: • Operate various types of forklifts (stand-up, sit-down, reach trucks) to efficiently load, unload, move, and store products while maintaining precise control and safety standards, • Transport goods throughout the warehouse facility and coordinate with shipping/receiving for smooth truck loading and unloading operations, • Conduct daily equipment inspections including fluid levels, tire condition, battery charge, and safety features; document and report maintenance needs according to company protocols, • Maintain inventory accuracy through careful scanning, labeling, and documentation of all product movements using RF scanners and warehouse management system, • Optimize warehouse space utilization by implementing safe stacking patterns and maintaining organized storage zones while adhering to weight limits and compatibility requirements, • Strictly follow OSHA safety guidelines, company policies, and proper PPE requirements while maintaining a clean and hazard-free work environment, • Support cross-functional warehouse operations including order picking, packing, cycle counting, and assisting with training new operators, • Report and document any damaged or defective goods through proper channels, • Participate in regular safety meetings and contribute to continuous improvement initiatives for warehouse efficiency, • Assist in seasonal inventory counts and special projects requiring material handling expertise, • Fast-paced, high-volume warehouse and manufacturing operations, • Maintain cleanliness of equipment and assigned work areas, including charging stations and storage zones within the warehouse, • High School Diploma or equivalent required, • Able to pass our internal Forklift Certification Program within the first 90 days, • Minimum 2 years of forklift operation experience preferred, • Forklift certification preferred, • Must be able to lift up to 50lbs and stand/walk for extended periodsBenefits:, • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Vision insurance, • Paid holidays Powered by JazzHR c4Gdfufphc

Job DescriptionMaterial Handler / Forklift Operator Automation Personnel Services is looking for Material Handlers/Forklift Drivers for our company based in North Houston, TX…to obtain a position as an Material Handler and Forklift Operator where someone can apply their skills in inventory handling, forklift operation, and order accuracy to support efficient warehouse operations, contribute to team productivity, and uphold safety standards. Pay Rate $18.00 per hour Schedule and HoursWe need someone able to be flexible around either shift mentioned below, as we would place someone on the shift where there is the most needed after completing the first week of training when hired. • Monday to Friday (some Saturdays) 2nd Shift: 10am – 7pm 3rd Shift: 1pm – 10pm Material Handler / Forklift Operator Duties and Responsibilities• Order Selection: Use reach truck and sit-down forklift to pick and palletize customer orders accurately and efficiently.• Material Handling: Move, stack, and organize products throughout the warehouse.• Shrink Wrapping & Packing: Prepare pallets for shipment by wrapping and labeling.• RF Scanner Use: Operate handheld scanners to track inventory and confirm order accuracy.• Safety Compliance: Follow all warehouse safety protocols and wear appropriate gear.Material Handler / Forklift Operator Qualifications and Requirements • Reach Truck: Ideal for accessing high shelves in narrow aisles.• Sit-Down Forklift: Used for transporting heavier loads across the warehouse floor.• Order Picker: May be used to retrieve individual items from racks.• 2+ years of experience operating reach trucks and sit-down forklifts.• Familiarity with RF scanners and warehouse inventory systems.• Ability to lift 50+ lbs. and work in a fast-paced environment.• Good job tenure and reliability. Job Type Full-time, Temporary, Temp to Permanent Benefits Bonus Opportunity! We are also offering a $50.00 referral bonus. Both employee and referral must stay on assignment for 30 days to receive the payout. About Automation Personnel Services Automation Personnel Services is a highly recognized staffing agency with over 30 years of experience in manufacturing and light-industrial staffing. Our accolades include: 10-time consecutive winner of the ClearlyRated® Best of Staffing Client Award (2016-2025). Winner of the ClearlyRated® Best of Staffing Talent Award (2019-2025). Recipient of the Safety Standard of Excellence Award by the American Staffing Association. Named one of the Best Staffing Companies to Work for by CIO Views Magazine. Consistently ranked among the top U.S. staffing agencies by Staffing Industry Analysts (SIA). Get that New Job Feeling! Apply Today! Equal Opportunity Employer APSHoustonNorth

Primary Responsibility: The 2nd Shift Supervisor is responsible for leading and managing the team of 2nd shift employees and ensuring the efficient and high-quality production of products, parts, or components. Production Supervisor - 2nd Shift. Shift: 2nd Shift, Monday - Thursday, 3:00 pm to 1:30 a

Must be able to pass Crane Operator Physical. Ensures that crane is properly secured upon the work barge prior to moving from one work location to another and otherwise demonstrates safe work practices in all aspects of crane operation. Ensures the crane has adequate ground bearing capacity to ensur

Cintas Corporation - - Responsibilities: Load and unload customer garments and bulk products into industrial washers and dryers; Set appropriate wash and dry parameters based on product type; Coordinate transfers between washers and dryers; Monitor proper functioning of washroom equipment; Maintain

Cintas Corporation - - Responsibilities: Assist with loading and unloading goods to maintain efficient warehouse operations and safety compliance daily.

Schwan's Company - - Responsibilities: Moving materials and supplies through the facility; Using material handling equipment such as carts, conveyer belts, and pallet jacks; Stacking skids or pallets in designated areas; Cleaning and disposing of scrap bracing cardboard and strapping; Placing items

Advance Services Inc - 1530 West Sam Houston Parkway North - Responsibilities: Move carts with books and deliver various types of materials to designated areas; Operate by cart and by hand; Maintain a clean and organized work environment; Work a 2nd shift schedule (3:00pm-11:30pm) with overtime/week

Cintas Corporation - - Responsibilities: Unload soiled products from company trucks and load clean uniforms, floor mats, and customer products onto trucks; Maintain cleanliness of work area and ensure quantity/quality loading standards are met; Operate in a fast-paced, schedule-driven environment w