Trabajos development manager en Waterbury, ConnecticutCrear alertas

#HIPAA and Privacy:# Properly direct any complaints and/or grievances as indicated per VNHSC policy.# Comply with HIPAA regulations, specifically the Privacy and Security Rules.# Protect personal health information (PHI), electronic personal health information (EPHI) and financial information by limiting the use and disclosure of health information and financial information to the minimum amount necessary with only those who must know how to get the job done.# Follow the department#s specific policies and procedures to protect health information.# Help one another to ensure confidentiality at all times.# # General Summary of Duties: The Home Care Nurse (LPN) is responsible to provide nursing care consistent with plan of care established by the RN Case Manager. # Supervision Received: Reports directly to a Team Leader.# Performs nursing care under the direction of the RN Case Manager # Supervision Exercised: None. # Typical Physical Demands: Requires full range of body motion including handling and lifting patients, manual and finger dexterity, and eye-hand coordination.# Requires standing, walking, and the ability to ascend and descend stairs.# Occasionally lifts and carries items weighing up to 30 pounds.# Requires corrected vision and hearing to normal range.# Requires working under stressful conditions.# Requires some exposure to communicable diseases and/or bodily fluids. # Typical Work Conditions: Work is performed in patients# homes, community settings, clinics and in an office environment.# Some exposure to communicable diseases, toxic substances, and medicinal preparations. # Essential Duties: (This list may not include all of the duties assigned.) # The Home Care Nurse (LPN) functions under the direction of the RN Case Manager. # C4, F4### 1.# Provides intermittent skilled nursing service to patients and their families in compliance with state and Medicare regulations, incorporating the following: a)## Assesses the physical and psychosocial status of the patient. b)## Follow-through of an appropriate care plan and therapeutic goals with the patient/family and RN Case Manager. c)## Referral to appropriate therapies with approval of the RN Case Manager. d)## Periodic review of progress toward the therapeutic goals in conference with the RN Case Manager. e)## Use of Agency and community consultants/resources. f)### Instruction of patient/family in procedures or responsibilities they are assuming. # C4, F3### 2.# Documents all services provided in the clinical record in accordance with state and federal regulations and Agency policy: a)## All visits are documented within 24 hours. b)## Documents all physicians# telephone orders, informing nurse/therapist of all changes to the plan of care before implementation and obtains their signature. c)## Complies with all reporting requirements. # # # # C4, F3###### 3.# Visit responsibilities: a)## Confers regularly with the RN Case Manager assigned. # b)## Remains flexible in daily planning, allowing time for emergencies or unexpected visits. c)## Reports any cases to the supervisor where goals can not be met or unsafe home situations exist. d)## Maintains required productivity as established by the Agency. # C3, F1### 4.# Develops and maintains sufficient professional skills to meet the needs of patient care: a)## Attends a minimum of 12 hours of in-service per year. b)## Participates actively in self-appraisal and the formation of a plan for self-development. c)## Knowledgeable of Agency policies and procedures. d)## Seeks appropriate supervision. e)## Projects professional image through attitude and compliance with dress code. f)### Functions as a team member with consideration to all staff. ###### ###########g)## Maintains CPR certification. ################# h)# Adheres to Agency Corporate Compliance Plan and HIPAA Privacy Plan# as per################################## written agreement. ################# Ancillary Duties # # C3, F1### 1.# Performs other duties as necessary to support Agency programs as assigned by the clinical supervisor: a)## Agency committees as requested. b)## Flu/special clinics as needed. c)## Adult Consultation Hours as assigned. d)## Special Agency or community programs during and/or after regular working hours. # C4 , F1## 2.# Performs other duties as necessary to maintain current Agency personnel policies: a)## Time worked is recorded regularly and accurately. b)## Personnel records are complete with but not limited to current professional license, auto and malpractice insurance. c)## Abides by Agency weekend/holiday rotation of nurses. # # Knowledge, Skills, and Requirements: Knowledge of professional nursing theory and practice and the skills to provide competent patient care.# Knowledge of Agency policies, regulations and procedures to administer patient care.# Knowledge of medical equipment currently used to provide patient care.# Knowledge of common safety hazards and precautions to establish a safe work environment.# Skill in# applying# and# modifying the principles, methods and techniques of# professional# nursing to provide ongoing patient care.# Skill in identifying patient-related problems and recommending solutions.# Skill in documentation in clinical records.# Skill in establishing and maintaining effective working relationships with patients, families, physicians, co-workers, and the community.# Ability to maintain quality control standards. #Ability to react calmly and effectively in emergency situations.# Ability to interpret, adapt and apply guidelines and procedures.# Ability to communicate clearly.# Possess adequate transportation to carry out job requirements.# Must show proof of satisfactory automobile insurance with minimum coverage to be $100,000/300,000 determined by agency policy. # Education: Graduate of NLN approved school of licensed practical nursing. # Experience: One (1) year of recent medical/surgical nursing experience, additional experience in community health nursing preferred. # Certificate/License: Possession of a current license to practice as a licensed practical nurse in the State of Connecticut.# # Alternative to Minimum Qualifications: None. # # #

Overview: After Hours Registered Nurse / RN, Hospice Location: Middlebury, CT Position: After Hours Registered Nurse / RN, Hospice Position Type: Full-Time Remote/Virtual Position: No Coverage Area: New Haven and Fairfield County Find Your Passion and Purpose as a Hospice After Hours Registered Nurse Salary: $90000 $105000 / year Schedule: 7 on / 7 off 5pm - 8am Offer Based on Years of Experience What You Need to Know: Reimagining Your Career in Hospice Caring for others is more than what you do — it’s who you are. At AccentCare, you’ll join a purpose-driven, collaborative culture that sets the standard for excellence and gives you the trust and tools to do your best work. You’ll belong to a team that cares deeply for patients and each other; a team committed to consistently providing exceptional care. We’re proud to be named one of America’s Greatest Workplaces 2025 by Newsweek — a reflection of our shared commitment to excellence, integrity and compassion as we shape the future of aging in place. When you thrive, so does the community of care we’re building together. Be the Best Hospice After Hours Admission RN You Can Be If you meet these qualifications, we would love to meet you: • Current licensure as a Registered Nurse in the applicable state is required, with an associate degree preferred. CPR certification is recommended (required for direct patient care in Georgia), along with prior experience in hospice, home health, medical-surgical, or population-specific nursing such as geriatrics or pediatrics., • Must demonstrate a willingness to participate in an on-call rotation and maintain reliable transportation, valid driver’s license, and state-required liability auto insurance., • Strong communication and organizational skills are essential, along with proficiency in Microsoft Office Suite and EMR systems. The ability to collaborate effectively within an interdisciplinary team is required., • Conducts comprehensive nursing assessments and collaborates with patients, families, physicians, and the Interdisciplinary Group (IDG) to develop, implement, and evaluate individualized plans of care in alignment with regulatory requirements and the Case Management Recipe., • Maintains timely and accurate documentation, ensures care plans reflect current patient status, and communicates effectively with the care team to coordinate optimal use of resources, especially in complex or high-risk situations., • Provides education and emotional support to patients and caregivers based on individual needs, and actively participates in on-call rotations, admissions, and care transitions as directed., • If serving as a Care Manager, coordinates all aspects of patient care including scheduling, medication management, plan of care oversight, IDG collaboration, and supervision of LPNs, LVNs, and Hospice Aides; participates in IDG meetings and patient/family conferences. Caring for others starts with caring for you. We’re committed to fostering a purpose-driven workplace where you feel supported, and that means prioritizing your physical, financial and mental well-being. Our benefits include: • Medical, dental, and vision coverage, • Paid time off and paid holidays, • Professional development opportunities, • Company-matching 401(k), • Flexible spending and health savings accounts, • Wellness offerings such as an employee assistance program, pet insurance and access to Calm, a meditation, sleep, and relaxation app, • Programs to celebrate achievements, milestones, and fellow employees, • Company store credit for your first AccentCare-branded scrubs for patient-facing employees, • And more! Qualifications: Come As You Are • At AccentCare, you’re part of a community that cares — for patients and each other. You can rest assured we offer equal employment opportunities regardless of race, ethnicity, sex, sexual orientation, gender identity, religion, national origin, age or disability. #AC-BRN Posted Salary Range: USD $90,000.00 - USD $105,000.00 /Yr.

-: A Great Place to Work Riverside is a proud affiliate of National Health Care Associates. As a Certified Great Place to Work, we think that you are going to love it here. Your work will be meaningful to you. You will make a genuine difference in the lives of our aging guests and the families that love them. You will enjoy lasting bonds with the families you meet and with the teams you work on. And if you desire, you will experience real career growth where your expertise and dedication is valued and appreciated. We invite you to join our team! -: RN Unit Managert for Short Term Rehab Unit What You'll Do: As an RN Unit Manager, you will oversee and coordinate the nursing staff within a dedicated unit. Your role is instrumental in ensuring the delivery of quality care, fostering a positive work environment, ensuring the health, comfort, and overall well-being of our residents. Key Responsibilities: • Lead and manage a team of nurses and support staff within the unit, • Develop and implement care plans, ensuring individualized resident care, • Supervise daily operations, including staffing, scheduling, and resource allocation, • Conduct regular assessments to maintain quality standards and compliance, • Provide guidance, mentorship, and training to nursing staff #Tier1 -: What We Offer As an affiliate of National Health Care, our Riverside team enjoys: • Competitive compensation and benefits package including a 10% defined contribution retirement plan, • Comprehensive training and mentorship, • Opportunities for professional growth and development, • Supportive and collaborative work environment, • The chance to make a meaningful difference in the lives of our residents -: What You'll Bring: Qualifications of a Unit Manager include: • Valid state RN nursing license, • Advanced degree or certification preferred, • Experience in a supervisory or leadership role in a Long-Term Care setting preferred, • Compassionate and empathetic approach to patient care Interest in the nursing needs of the aged and the chronically ill with the ability to work with both, • Strong clinical, leadership, organizational, and decision-making skills, • Excellent communication and interpersonal abilities National Health Care Associates (National) is proud to be a family-run organization since 1984. Like family, each of National’s centers are unique but share common values: Kindness, Service, Compassion and Excellence. Today, our centers include more than 40 premier providers of short-term rehabilitation, skilled nursing, and post-hospital care including several named “Best Of” by US News & World Report. When you join the team at a National center, you join a team that provides life-changing care to thousands of patients, residents, and families in a Great Place to Work Certified environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status.

-: A Great Place to Work Cambridge is a proud affiliate of National Health Care Associates. As a Certified Great Place to Work, we think that you are going to love it here. Your work will be meaningful to you. You will make a genuine difference in the lives of our aging guests and the families that love them. You will enjoy lasting bonds with the families you meet and with the teams you work on. And if you desire, you will experience real career growth where your expertise and dedication is valued and appreciated. We invite you to join our team! -: RN Passport Unit Manager 40 hours, M-F with nursing on call $2,500 bonus Sign-On Bonus What You'll Do: As an RN Unit Manager, you will oversee and coordinate the nursing staff within a dedicated unit. Your role is instrumental in ensuring the delivery of quality care, fostering a positive work environment, ensuring the health, comfort, and overall well-being of our residents. Key Responsibilities: • Lead and manage a team of nurses and support staff within the unit, • Develop and implement care plans, ensuring individualized resident care, • Supervise daily operations, including staffing, scheduling, and resource allocation, • Conduct regular assessments to maintain quality standards and compliance, • Provide guidance, mentorship, and training to nursing staff What We Offer As an affiliate of National Health Care, our Cambridge team enjoys: • Competitive compensation and benefits package including a 10% defined contribution retirement plan, • Comprehensive training and mentorship, • Opportunities for professional growth and development, • Supportive and collaborative work environment, • The chance to make a meaningful difference in the lives of our residents -: What You'll Bring: Qualifications of a Unit Manager include: • Valid state RN nursing license, • Advanced degree or certification preferred, • Experience in a supervisory or leadership role in a Long-Term Care setting preferred, • Compassionate and empathetic approach to patient care Interest in the nursing needs of the aged and the chronically ill with the ability to work with both, • Strong clinical, leadership, organizational, and decision-making skills, • Excellent communication and interpersonal abilities National Health Care Associates (National) is proud to be a family-run organization since 1984. Like family, each of National’s centers are unique but share common values: Kindness, Service, Compassion and Excellence. Today, our centers include more than 40 premier providers of short-term rehabilitation, skilled nursing, and post-hospital care including several named “Best Of” by US News & World Report. When you join the team at a National center, you join a team that provides life-changing care to thousands of patients, residents, and families in a Great Place to Work Certified environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status.

-: A Great Place to Work Hebrew is a proud affiliate of National Health Care Associates. As a Certified Great Place to Work, we think that you are going to love it here. Your work will be meaningful to you. You will make a genuine difference in the lives of our aging guests and the families that love them. You will enjoy lasting bonds with the families you meet and with the teams you work on. And if you desire, you will experience real career growth where your expertise and dedication is valued and appreciated. We invite you to join our team! -: LPN or RN Unit Manager Day Shift- 7am-3pm What You'll Do: As a Nursing Supervisor, you will lead an interdisciplinary team to provide exceptional care and ensure the health, comfort, and overall well-being of our residents. Your responsibilities will include oversight of the facility operations, safety, cleanliness and compliance to nursing policies, procedures and regulations. Key Responsibilities: • Supervising and guiding nursing staff to ensure high-quality care delivery, • Overseeing daily operations, including staffing assignments and resource allocation, • Collaborating with the interdisciplinary team to develop and implement care plans, • Conducting regular assessments and audits to maintain quality standards, • Providing mentorship, training, and support to nursing staff #Tier1 -: What We Offer As an affiliate of National Health Care, our Hebrew team enjoys: • Competitive compensation and benefits package including a 10% defined contribution retirement plan, • Comprehensive training and mentorship, • Opportunities for professional growth and development, • Supportive and collaborative work environment, • The chance to make a meaningful difference in the lives of our residents -: What You'll Bring: Qualifications of a Nursing Supervisor include: • Valid state nursing license, • Advanced degree or certification preferred, • Experience in a supervisory or leadership role in a Long-Term Care setting preferred, • Compassionate and empathetic approach to patient care, • Interest in the nursing needs of the aged and the chronically ill with the ability to work with both, • Strong clinical, leadership, organizational, and decision-making skills, • Excellent communication and interpersonal abilities National Health Care Associates (National) is proud to be a family-run organization since 1984. Like family, each of National’s centers are unique but share common values: Kindness, Service, Compassion and Excellence. Today, our centers include more than 40 premier providers of short-term rehabilitation, skilled nursing, and post-hospital care including several named “Best Of” by US News & World Report. When you join the team at a National center, you join a team that provides life-changing care to thousands of patients, residents, and families in a Great Place to Work Certified environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status.

-: A Great Place to Work As a Certified Great Place to Work, we think that you are going to love it here. Your work will be meaningful to you. You will make a genuine difference in the lives of our aging guests and the families that love them. You will enjoy lasting bonds with the families you meet and with the teams you work on. And if you desire, you will experience real career growth where your expertise and dedication is valued and appreciated. We invite you to join our team! -: RN Unit Manager Day Shift- Monday- Friday What You'll Do: As an RN Unit Manager, you will oversee and coordinate the nursing staff within a dedicated unit. Your role is instrumental in ensuring the delivery of quality care, fostering a positive work environment, ensuring the health, comfort, and overall well-being of our residents. Key Responsibilities: • Lead and manage a team of nurses and support staff within the unit, • Develop and implement care plans, ensuring individualized resident care, • Supervise daily operations, including staffing, scheduling, and resource allocation, • Conduct regular assessments to maintain quality standards and compliance, • Provide guidance, mentorship, and training to nursing staff #Tier1 -: What We Offer • Competitive compensation and benefits package, • Comprehensive training and mentorship, • Opportunities for professional growth and development, • Supportive and collaborative work environment, • The chance to make a meaningful difference in the lives of our residents -: What You'll Bring: Qualifications of a Unit Manager include: • Valid state RN nursing license, • Advanced degree or certification preferred, • Experience in a supervisory or leadership role in a Long-Term Care setting preferred, • Compassionate and empathetic approach to patient care Interest in the nursing needs of the aged and the chronically ill with the ability to work with both, • Strong clinical, leadership, organizational, and decision-making skills, • Excellent communication and interpersonal abilities National Health Care Associates (National) is proud to be a family-run organization since 1984. Like family, each of National’s centers are unique but share common values: Kindness, Service, Compassion and Excellence. Today, our centers include more than 40 premier providers of short-term rehabilitation, skilled nursing, and post-hospital care including several named “Best Of” by US News & World Report. When you join the team at a National center, you join a team that provides life-changing care to thousands of patients, residents, and families in a Great Place to Work Certified environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status.

-: A Great Place to Work The Pines at Bristol is a proud affiliate of National Health Care Associates. As a Certified Great Place to Work, we think that you are going to love it here. Your work will be meaningful to you. You will make a genuine difference in the lives of our aging guests and the families that love them. You will enjoy lasting bonds with the families you meet and with the teams you work on. And if you desire, you will experience real career growth where your expertise and dedication is valued and appreciated. We invite you to join our team! -: RN Unit Manager Passport Unit Monday-Friday 9am-5pm What You'll Do: As an RN Unit Manager, you will oversee and coordinate the nursing staff within a dedicated unit. Your role is instrumental in ensuring the delivery of quality care, fostering a positive work environment, ensuring the health, comfort, and overall well-being of our residents. Key Responsibilities: • Lead and manage a team of nurses and support staff within the unit, • Develop and implement care plans, ensuring individualized resident care, • Supervise daily operations, including staffing, scheduling, and resource allocation, • Conduct regular assessments to maintain quality standards and compliance, • Provide guidance, mentorship, and training to nursing staff #Tier1 -: What We Offer As an affiliate of National Health Care, our Bristol team enjoys: • Competitive compensation and benefits package including a 10% defined contribution retirement plan, • Comprehensive training and mentorship, • Opportunities for professional growth and development, • Supportive and collaborative work environment, • The chance to make a meaningful difference in the lives of our residents -: What You'll Bring: Qualifications of a Unit Manager include: • Valid state RN nursing license, • Advanced degree or certification preferred, • Experience in a supervisory or leadership role in a Long-Term Care setting preferred, • Compassionate and empathetic approach to patient care Interest in the nursing needs of the aged and the chronically ill with the ability to work with both, • Strong clinical, leadership, organizational, and decision-making skills, • Excellent communication and interpersonal abilities National Health Care Associates (National) is proud to be a family-run organization since 1984. Like family, each of National’s centers are unique but share common values: Kindness, Service, Compassion and Excellence. Today, our centers include more than 40 premier providers of short-term rehabilitation, skilled nursing, and post-hospital care including several named “Best Of” by US News & World Report. When you join the team at a National center, you join a team that provides life-changing care to thousands of patients, residents, and families in a Great Place to Work Certified environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status.

Job Description Position Title: Maintenance Technician II Reports To: Maintenance Manager FLSA Status: Non-Exempt Revision Date: 7/16/2025 Job Summary The Maintenance Technician II is responsible for performing advanced maintenance, repairs, and installations on a wide range of complex facility equipment and systems. These include HVAC, electrical, plumbing, carpentry, irrigation, and mechanical systems. This role leads troubleshooting efforts, collaborates with contractors, and mentors junior technicians to ensure optimal building performance. The Technician II also plays a key role in preventive maintenance planning and emergency response operations. Essential Duties and Responsibilities • Perform advanced maintenance, repairs, and installations across HVAC, electrical, plumbing, carpentry, and mechanical systems., • Lead troubleshooting efforts for complex issues and provide emergency response support as needed., • Manage and maintain 45 rooftop units (RTUs) (10, 18, and 30 tons); develop maintenance schedules, conduct inspections, and coordinate repairs with contractors., • Operate and maintain the Trane Tracer system, irrigation systems, and Dosatron equipment., • Conduct daily rooftop and facility inspections; document performance and escalate issues when necessary., • Install, configure, and ensure safe operation of facility equipment., • Enter and update maintenance tasks in the e-maintenance system and maintain accurate records., • Train, guide, and supervise junior maintenance staff to ensure safety and skill development., • Support facility upgrades, renovations, and expansions by providing technical oversight., • Maintain workspace cleanliness and enforce compliance with all safety protocols., • Operate facility equipment, including scissor lifts, safely and efficiently., • Perform additional duties as assigned to support the overall maintenance and operational needs of the facility. Job Requirements • Ability to work independently and follow detailed instructions., • Comfortable working at heights up to 35 feet., • Completion of required maintenance training, including scissor lift certification., • Strong knowledge of HVAC, electrical, plumbing, and carpentry systems., • Proficiency with diagnostic tools and advanced maintenance equipment., • 3-5+ years of experience in facility maintenance or a related field., • Demonstrated leadership, organizational, and time management skills., • Experience supervising or training maintenance staff., • High school diploma or equivalent required; technical certifications preferred. The physical demands listed below are representative of those necessary to successfully perform the essential functions of the job. Reasonable accommodations may be made for individuals with disabilities. • Regularly required to stand for extended periods., • Frequent use of hands and fingers; ability to talk and hear., • Regularly lift and/or move up to 50 pounds., • Specific visual requirements include both close and distance vision. Equal Opportunity Employer We are an Equal Opportunity Employer. We do not discriminate based on race, color, religion, age, sex, gender identity, sexual orientation, national origin, disability, veteran status, or any other protected category under federal, state, or local law. Americans with Disabilities Act (ADA) We are committed to fostering an inclusive workplace and complying with the ADA by providing reasonable accommodations to qualified individuals with disabilities. Benefits & Compensation Compensation: $25.00 Hourly Benefits Include: • 401(k) plan available after 2 months of employment, • Medical, dental, and vision benefits are effective the first of the month after 60 days of employment, • Vacation and sick time eligibility begins after 3 months of employment

Job Description Quality Inspector 1 – Non-exempt Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. We looking for an Aerospace Quality Inspector to perform 1st piece, in-process and final inspection on aircraft engine components for compliance with engineering drawings, customer requirements and company specifications before or after manufacturing processes. This will also include performing inspection procedures including checking dimensions of related surfaces, holes, etc., as well as assessment of finish and detection of undesirable nonconformances. Location: Cheshire, CT Reports to: Quality Supervisor/Manager Essential Duties & Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform. • Obtains blueprints and company specification sheet for the item and particular order., • Must be capable of reviewing internal operation sheets against customer blueprints., • Determines inspection procedure to ensure complete verification of specifications and dimensions., • Obtains necessary fixtures, gauges, and indicators to check parts for compliance with specifications, within prescribed tolerances., • Completes certain assurance checklists during the process. Performs dimensional checks of parts while in the machine when necessary., • Rejects unacceptable items, documents nonconformance, and moves part to quality clinic., • Completes required company paperwork on machined parts inspection activity., • Ability to read and understand work instructions such as Op Sheets, Engine Manuals, Customer Purchase Order Requirements, etc., • Ability use measuring instruments such as a micrometer, caliper, swing gage, etc., • Accurate documentation of all inspections (Ex: Receiving, In-Process, Final) and ability to work with operators to ensure all requirements are met., • Communicates with co-workers, colleagues and Supervisors to receive instructions and/or guidance and coordinate activities., • Organize and maintain inspection department, gaging methods, etc., • Work independently and efficiently to meet customer requirements., • Willingness to work with shop personnel to induct incoming parts and aid in the expeditious shipment of critical parts, • Ability to read and comprehend instructions, short correspondence, and memos. Adaptability to different inspection methods, • Adhere to standards of safety and housekeeping as established, • Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this job description., • Participate in training as required, • 5-10% Domestic Travel required Requirements: • Must be a “U.S. Person” as defined by US Government and able to work without restriction with ITAR related data., • High school diploma or general education degree (GED) required, • 1+ years experience as an aerospace part inspector; or equivalent combination of education and experience., • Ability to use measuring instruments such as a micrometer, caliper, swing gage, etc., • Knowledge of blueprint reading and machinery limitations., • Ability to read and comprehend simple instructions, short correspondence, and memos., • Must have visual acuity enough to be able to read machine dials, gages, Op sheets and precision measuring equipment., • Must be able to read, write, understand, and speak English at a functional level. AAP Statement Hanwha Aerospace USA Corporation, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. Subject to change with or without notice

-: A Great Place to Work Bethel is a proud affiliate of National Health Care Associates. As a Certified Great Place to Work, we think that you are going to love it here. Your work will be meaningful to you. You will make a genuine difference in the lives of our aging guests and the families that love them. You will enjoy lasting bonds with the families you meet and with the teams you work on. And if you desire, you will experience real career growth where your expertise and dedication is valued and appreciated. We invite you to join our team! -: RN Unit Manager Sign-On Bonus $2500 What You'll Do: As an RN Unit Manager, you will oversee and coordinate the nursing staff within a dedicated unit. Your role is instrumental in ensuring the delivery of quality care, fostering a positive work environment, ensuring the health, comfort, and overall well-being of our residents. Key Responsibilities: • Lead and manage a team of nurses and support staff within the unit, • Develop and implement care plans, ensuring individualized resident care, • Supervise daily operations, including staffing, scheduling, and resource allocation, • Conduct regular assessments to maintain quality standards and compliance, • Provide guidance, mentorship, and training to nursing staff As an affiliate of National Health Care, our Bethel team enjoys: • NEW! 10% discount on full-time child care for children ages 6 weeks to 6 years at Honey Tree Preschool & Childcare, • Competitive compensation and benefits package including a 10% defined contribution retirement plan, • Comprehensive training and mentorship, • Opportunities for professional growth and development, • Supportive and collaborative work environment, • The chance to make a meaningful difference in the lives of our residents -: What You'll Bring: Qualifications of a Unit Manager include: • Valid state RN nursing license, • Advanced degree or certification preferred, • Experience in a supervisory or leadership role in a Long-Term Care setting preferred, • Compassionate and empathetic approach to patient care Interest in the nursing needs of the aged and the chronically ill with the ability to work with both, • Strong clinical, leadership, organizational, and decision-making skills, • Excellent communication and interpersonal abilities, • Ability to work effectively in a dynamic and fast-paced environment #Tier1 -: We Hire for Heart! National Health Care Associates (National) is proud to be a family-run organization since 1984. Like family, each of National’s centers are unique but share common values: Kindness, Service, Compassion and Excellence. Today, our centers include more than 40 premier providers of short-term rehabilitation, skilled nursing, and post-hospital care including several named “Best Of” by US News & World Report. When you join the team at a National center, you join a team that provides life-changing care to thousands of patients, residents, and families in a Great Place to Work Certified environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status.

Job DescriptionBenefits: • Simple IRA, • Licensing paid by agency, • Bonus based on performance, • Competitive salary, • Flexible schedule, • Opportunity for advancement, • Paid time off Grow your career as you better your community. As an attentive, sociable, and sales-minded professional, we are eager to have you on our team. RESPONSIBILITIES: • Develop and maintain customer relationships to drive retention and growth., • Conduct policy reviews and provide recommendations to customers., • Oversee the resolution of complex customer issues., • Use your knowledge of our insurance products to recommend, explain and sell policies to both cold and warm leads.QUALIFICATIONS:, • Experience in insurance sales or account management preferred., • Leadership and interpersonal skills., • Proven track record of meeting sales targets., • Willingness to engage in sales conversations., • Bilingual Spanish preferred.

Job DescriptionBenefits: • License reimbursement, • Bonus based on performance, • Competitive salary, • Flexible schedule, • Opportunity for advancement, • Paid time off Our office culture is built around a strong work ethic and a genuine commitment to our clients and each other. We show up every day ready to give our best, support one another, and create a positive environment where everyone can succeed. Continuous learning and growth are at the heart of what we do were always striving to improve our knowledge, refine our skills, and become better versions of ourselves. Team members enjoy a range of perks, including bonuses based on sales and performance, paid time off, free food and snacks, and ongoing professional development. Were dedicated to helping our team grow, with clear advancement opportunities within the agency and even a pathway to ownership through State Farms aspirant agent program. The ideal candidate for our team is hardworking, motivated, and eager to learn. You should have a genuine desire to help others, take pride in delivering exceptional service, and approach challenges with a positive, resilient attitude. If youre looking for a place where you can grow your career, make an impact, and be part of a supportive and driven team, this could be the perfect fit for you. ROLE DESCRIPTION: As Account Manager - State Farm Agent Team Member for Marta Nerin - State Farm Agent, you are vital to our daily business operations and customers success. You grow our agency through meaningful customer relations and acting as a liaison between customer needs and agency departments. You improve the lives of our customers by proactively marketing relevant products and services. Grow your career as you better your community. As an attentive, sociable, and sales-minded professional, we are eager to have you on our team. RESPONSIBILITIES: • Develop and maintain customer relationships to drive retention and growth., • Conduct policy reviews and provide recommendations to customers., • Oversee the resolution of complex customer issues., • Use your knowledge of our insurance products to recommend, explain and sell policies to both cold and warm leads.QUALIFICATIONS:, • Experience in insurance sales or account management preferred., • Leadership and interpersonal skills., • Proven track record of meeting sales targets., • Willingness to engage in sales conversations.

Job Description Manufacturing Engineer – Exempt Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. This challenging positon is a great opportunity for the right candidate to become a part of a dedicated team of aerospace manufacturing professionals. This position will be responsible for performing general engineering tasks that optimize processing capabilities of the facility through process development and verification. The Manufacturing Engineer will analyze process flow, developing performance enhancements and monitoring production results. Location: Cheshire, CT Reports to: Engineering Manager Essential Duties & Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform. • Create and / or improve on systems that optimize the efficiency of material flow throughout the facility., • Develop the most efficient and cost effective manufacturing process, and sequence of production operations from blueprints, quality documents, and purchase orders., • Coordinate production processes by creating operation sheets and providing all manufacturing related information., • Create material process requisitions with technical data requirements for special manufacturing processes., • Develop most effective solutions to production and quality problems that are related to material, production processes and tools., • Manage product and process engineering related activities during the development stage from raw material to finished product, • Research and develop process sheets with proper work instructions for the operators, inspectors and shipping., • Will act as a liaison for the shop process development, integrating with management, shop personnel, purchasing, production control, vendors and customers to make the job as productive as possible., • Implement all Engineering Changes from the Customer to the process sheets, programs, etc., • Interact with various internal functions to provide manufacturing engineering support for production., • Participate in Root Cause Analysis and implementation of Corrective Actions., • Initiate and lead optimization projects to improve quality outcomes, reduce production costs, and shorten cycle time., • Build trust and confidence with customers to resolve engineering, manufacturing, and quality issues., • Participate in training as required, • 5-10% Domestic Travel required Requirements: • Must be a “US Person” as defined by US Government and able to work without restriction with ITAR related data., • Bachelor’s Degree in Mechanical Engineering or other related field required, • 2+ years experience as an Engineer in a manufacturing environment, • Must have the ability to work with CAD Systems such as Solidworks, NX 7.5 and above, Microsoft Office to generate work instructions / process sheets., • Desire for practical and tangible ‘hands-on’ work in a manufacturing environment., • Knowledge/experience in the machining of nickel and titanium based alloys preferred (i.e. milling, turning, broaching, and special processes), • Demonstrated record or desire of same for the self-directed management of multiple tasks in a high-tempo manufacturing environment., • An determined commitment to overcome challenges in order to resolve issues and accomplish both company and personal objectives., • Must possess excellent skills in blueprint reading and interpretation, have the ability to understand customer requirements and specifications., • Must be able to read, write, understand, and speak English at a functional level. AAP Statement Hanwha Aerospace USA is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination.

Job Description Job Title: CNC Machinist 1 Exempt Status: Non-Exempt Location: Cheshire, CT Company Description: Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: Plan and perform various CNC turning and milling operations to machine a variety of metal parts under the supervision of the Operations Manager.. Essential Functions: • Machine parts to specifications using machine tools such as lathes and milling machines, • Work from blueprints, engineering instructions, and specifications, • Setup, adjust and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations, • Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines, • Check parts to ensure that they are properly lubricated and cooled, • Measure, examine, and test completed units to defects and ensure conformance to specifications, using precision instruments such as micrometers, • Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter, • Maintain records and document in-process inspection data Required Qualifications & Experience: • Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data, • High School Degree or G.E.D, • 1+ years of experience Desired Knowledge, Skills, and Abilities • Precision Manufacturing Certificate preferred, • Must be able to read, write, understand, and speak English at a functional level, • Ability to communicate professionally and effectively with all levels of the organization, • Ability to interpret policies, procedures, and standard business practices, • Ability to read and interpret blueprints and engineering work instructions, • Ability to setup and operate CNC turning and milling machines, • Ability to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances, • Knowledge of G & M codes, • Ability to travel domestically – 10% max Physical Requirements: • Must be able to lift 35lbs, • Must be able to sit and stand for extended periods of time, • Must be able to go up and down stairs frequently Reasonable accommodations may be made to enable individuals with disabilities to perform. Hanwha Aerospace USA is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. Friday, Saturday, Sunday 5:00AM - 5:00PM

Job Description RBC Bearings Incorporated (NASDAQ: ROLL) is a leading international manufacturer of highly engineered precision bearings and components for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and engineered components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 54 facilities, of which 38 are manufacturing facilities in 11 countries and our market capitalization is approximately $10.6 billion. JOB TITLE/LOCATION: Associate Product Manager – Oxford, CT JOB SUMMARY: The Associate Product Manager (Reporting to the Business Development Director for Growth) is responsible for managing the day-to-day business processes related to long-term growth of the RBC. These day-to-day responsibilities include new product development, market development, acquisition review and new customer development. RESPONSIBILITIES: • Responsible for supporting all initiatives in the RBC Division’s product lines to achieve year-over-year sales growth., • Assist in the development, communication and execution of the growth strategy., • Assist in the development and management of a 5-year growth plan., • Manage a review process for the projects and initiatives needed to achieve the 5-year growth plan. This should include activity history and next actions required., • Develop and execute new products, product line extensions, methods of differentiation in the marketplace., • Manage the new product launch process related to 5-year growth initiatives., • Act as the interface between the customer & RBC sales, engineering, and the plant., • Provides the tracking data associated with the long term or 5-year growth plan – Ops packages, Project review, status updates and growth potential., • Manage and structure the customer base through either rationalization or expansion., • Develop strong relationships with customers., • Select and prioritize projects to meet sales and profit objectives., • Other duties as assigned as supervisor., • Attendance at work is an essential function of the job EDUCATION: • Bachelor’s degree in a science or engineering related field. REQUIREMENTS: • Technical sales experience, technical training or mechanical aptitude., • Ability to influence and lead without formal authority., • Strategic thinking and analytical skills (e.g., pricing, market segmentation)., • Bearing experience or knowledge is a plus., • Excellent computer skills; familiarity with AS400 and ASI is a plus, • Effective team player and leader., • Strong communication skills across all functional areas and with customers., • Results-driven with a strong focus on achieving targets. We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

Job DescriptionDetails: Posted: September 1, 2025 Level: Assistant Professor, tenure track position Hours: Full-time, 10-month (30 credit hours per academic year) Closing Date: Open until filled, with priority consideration given to applicants who submit materials by Wednesday October 1, 2025. Location: CT State Naugatuck Valley 750 Chase Pkwy, Waterbury, CT 06708 This position is not remote For more information about CT State Community College and the campus please visit Home - CT State CT State Community College Mission: Connecticut State Community College provides access to academically rigorous and innovative education and training focused on student success. The college supports excellence in teaching and learning, makes data-informed decisions, promotes equity, and advances positive change for the students, communities and industries it serves. CT State Community College Vision: Connecticut State Community College is recognized for exceptional student success, educational leadership and transformative collaboration with business and industry, government, educational and key stakeholders while advancing diverse opportunities for Connecticut’s citizens and communities. CT State Community College Equity Statement: Connecticut State Community College commits to bold and disruptive change by actively identifying, naming, and dismantling structural racism, systemic poverty, and other barriers; establishing equitable and anti-racist policies and practices; and empowering students, faculty, staff, and administrators to advance racial, social, and economic justice. Our core collective responsibility is to continuously assess practices and policies and transform the world we live in by eliminating inequities. Anticipated Start Date: Fall 2026 (August 25, 2026) Position Summary: All Teaching Faculty members shall: Prepare and teach college-approved courses in accordance with approved course descriptions and class schedules, including developing syllabi and reading lists and keeping each course taught complete and up to date; respond to and work with multiple constituencies, including students, peers (faculty and staff), and external agencies (business, community, educational, etc.); perform divisional departmental responsibilities in the selection of texts and related teaching resources; and other teaching and related duties as outlined on the Collective Bargaining Agreement. Working supervisory level. Example of Job Duties: Under the direction of the Dean or Chair of the department, this Assistant Professor is expected to teach thirty (30) credit hours per academic year and will be responsible for teaching a range of courses in the discipline area of study. Additional duties may include evaluating and assessing student learning; providing student support and academic advising; planning and executing program-related events; assisting with program reviews; developing curriculum and periodically evaluating teaching materials; and attending workshops and or conferences to maintain currency in profession and field. The teaching schedule may include both day and evening classes. Course delivery systems may be lecture, hybrid, and/or online. The Program Coordinator is also expected to recruit, advise and retain students in these areas; select appropriate part-time instructors; schedule the program courses; hire and evaluate faculty; establish and cultivate partnerships with local organizations and employers; arrange and supervise internships; assess and improve the program; and other such duties as may be appropriately assigned to a Program Coordinator in accordance within the contract hours and with regard to the collective bargaining agreement. Release time is based on collective bargaining agreement to perform administrative functions. In addition to the accountabilities listed above, the incumbent is required to carry out the essential duties of attendance and participation at convocation and commencement ceremonies; service on assigned committees and task forces; and attendance and participation at committee, staff, informational and professional meetings. These may involve attendance at evening or weekend events. This posting includes qualifications, experience and skills but is not limited to the full duties and responsibilities that is stated within the Collective Bargaining Agreement. Minimum Qualifications: Master’s degree in Legal Studies or a related discipline. Successful Candidate must have or must possess: • Juris Doctor (JD) degree., • Experience teaching Paralegal or Business Law classes., • Experience with curriculum development, program assessment and evaluation., • Experience supervising paralegals, faculty or staff., • Experience in the oversight of cooperative work & learning experiences. We offer a comprehensive benefits package to help you stay well, protect yourself and your family, and plan for a secure future. Benefits include generous leave policies; several retirement plans; and many choices for comprehensive health insurance. You also have access to many additional benefits to save for retirement, protect your family & more with supplemental benefits. Tuition reimbursement may apply if applicable. For more information, please visit our website at: CSCU - Human Resources - Future Employees. Application Instructions: To apply you must submit a cover letter and resume. The cover letter may be entered as text in the corresponding box, or it can be uploaded as a combined file with the resume. Incomplete applications or those submitted after the closing date will not be considered and links to other sources to view resumes are not acceptable. To apply via our website, visit . Selection Procedure: Following the closing date, application materials will be evaluated by a selection committee. Candidates selected for further consideration will be limited to those applicants who are best qualified based on the minimum and preferred qualifications and who have submitted all the required documents by the closing date and time listed on the job announcement. Candidates who have been selected and approved to interview will be contacted, and finalists will be recommended for further consideration by the Hiring Manager for final selection and recommendation for employment. The selection process may also include practical exercises (i.e., teaching demonstration and/or other written, technical, manipulative, or simulation exercises) to evaluate candidates' qualifications. Background Screening: All employment, if offered, is contingent upon proof of citizenship or employability under the requirement of the Immigration and Control Act (IRCA) and the successful passing of a background check, including granting permission to contact current and previous employers for verification. CSCU is committed to providing a safe campus community. Background investigations include reference checks, a criminal history record check and, when appropriate, a financial (credit) report or driving history check. Continuing Notice of Nondiscrimination CT State Community College does not discriminate on the basis of age, ancestry, color, national origin, gender identity or expression, genetic information, learning disability, marital status, intellectual disability, physical disability (including but not limited to blindness), present or past history of mental disability, prior criminal record, race, religious creed, sex (including pregnancy and sexual harassment), sexual orientation, retaliation for previously opposed discrimination or coercion, veteran status, victims of domestic violence, sexual assault, and/or trafficking or any other federal or state protected class in its employment, programs, and activities, unless the provisions of Section 46a-80(b) or 46a-81(b) of the Connecticut General Statutes are controlling or there are bona fide occupational qualifications excluding persons in one of the above protected groups. For information regarding the nondiscrimination, disability, and Title IX policies/procedures, contact: John-Paul Chaisson-Cardenas, Vice President for Diversity, Equity, and Inclusion, CT State Community College, 185 Main Street, New Britain, CT 06051, 860-612-7056 or . CSCC IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER. Powered by JazzHR H4wX5lTBDn

Job Description POSITION: QUALITY ENGINEER DESCRIPTION SUMMARY Responsible for sustaining and improving the processes required to manufacture a medical device under the guidance of an ISO 13485 Quality Management System, FDA requirements, and other international standards. Quality Engineer will be a member of the engineering team and report to the Manufacturing Engineering Manager. PRIMARY RESPONSIBILITIES • Lead technical resource for Quality, RMA and Technical Support., • Plan, execute and oversee component inspection and testing process to verify conformance with specifications., • Create and revise incoming inspection documentation., • Work collaboratively with Quality team members to manage the NCR process including documentation, supplier communication, product returns and rework, SCAR root cause investigations and issue resolution., • Initiate and rationalize engineering changes from nonconforming component issues, suggest changes for approval or rejection., • Develop design recommendations to improve product reliability and performance., • Develop, test, and implement design changes as well as coordinate with suppliers and manufacturers to ensure smooth implementation., • Provide technical resource regarding equivalency in value engineering and analysis for current components and future product development projects., • Manage Bill of Materials across multiple product lines., • Prepare and review documentation with a high degree of accuracy, completeness, and effectiveness. KNOWLEDGE AND SKILL REQUIREMENTS • 5+ years of experience in a manufacturing environment required., • Bachelor’s degree in Engineering (Mechanical, Manufacturing or Biomedical) required., • Working knowledge of AS 9100, ISO 9001 and/or ISO 13485 preferred, • Proficient In CAD with SolidWorks expertise preferred., • Knowledge of manufacturing operations, process verification and validation, geometric dimensioning and tolerancing (GD&T) including the ability to create and understand prints and specifications., • Ability to organize and prioritize workflow across multiple projects to meet established time frames and schedules., • Mechanically inclined with an affinity for tools and measuring equipment., • Proficient in Microsoft Office, a good working knowledge of Excel a must., • Excellent communication and organizational skills working in cross-functional teams. This is an exempt; full time position. Compensation is dependent on experience and education. Benefits include a matching 401K, health, dental, vision and paid time off.

Job DescriptionNCS is seeking a compassionate and skilled Speech-Language Pathologist (SLP) to join our multidisciplinary team dedicated to supporting the communication and social-emotional needs of K–8 students. In this role, you will work directly with students—many of whom are Autistic or have identified speech and language challenges—by providing individualized and group therapy services. You’ll play a key part in fostering communication growth, self-advocacy, and social interaction skills that empower students to thrive academically and socially. With access to rich professional development, a collaborative team, and a mission-driven school culture, this position offers both purpose and professional growth. What We Offer • Supportive SLP Team: Join a team of 4+ in-house SLPs for regular collaboration and shared expertise., • Expert Supervision: Direct mentorship from a licensed, experienced SLP team manager., • Professional Development: Monthly consultation with a Social Thinking® collaborative trainer and access to targeted workshops., • Generous CEU Allowance: $250 annually for continuing education., • Deliver individualized and small-group speech and language therapy to students with IEPs across K–8., • Address a broad range of communication areas including:, • Receptive and expressive language, • Articulation and phonological processing, • Fluency and voice, • Social-pragmatic language and conversational skills, • Design and implement Social Club programming for Autistic students using Social Thinking® methodologies.Assessment and Documentation, • Conduct initial and ongoing evaluations, screenings, and assessments to identify communication disorders., • Develop, write, and update IEP goals and present levels of performance in collaboration with the IEP team., • Maintain clear, accurate, and confidential records including session notes, progress reports, and compliance documentation., • Ensure therapy and documentation adhere to IDEA regulations and school policies.Collaboration and Consultation, • Provide support to general education and special education staff with classroom strategies and interventions for at-risk or struggling students., • Participate actively in student support meetings, IEP meetings, and family consultations., • Work closely with school leaders, teachers, and other specialists to ensure holistic support for students.Professional Development & Growth, • Attend and contribute to weekly team meetings and regular supervision with an experienced SLP team manager., • Participate in ongoing school-wide professional development sessions., • Engage with outside experts and Social Thinking® consultants through monthly supervision and collaboration., • Take advantage of $250 CEU reimbursement and opportunities to supervise graduate-level SLP students.Qualifications, • Master’s degree in Speech-Language Pathology or Communicative Disorders, • Valid state license or eligibility for licensure as an SLP, • Clinical Fellows (CFs) encouraged to apply – high-quality supervision provided, • Experience supporting school-aged students with disabilities, especially Autistic learners, • Familiarity with Michelle Garcia Winner’s Social Thinking® curriculum, • Strong interpersonal, organizational, and communication skills Requirements Authorized to work in the US without sponsorship TSSLD Certification Required Master's Degree in Speech and Language Pathology or Communicative Disorders Licensed SLP/CF (high quality supervision available) Requisition #cma5sepj9etdm0im89f2vdtp0

Job DescriptionQC Manager | $28.00-35.00 per hour | Monday-Friday 7:00am-5:00pm |Contract to Hire What Matters Most • Competitive Pay of $28-35 per hour, • Schedule: Monday-Friday 7:00am-5:00pm, • Location: Watertown, CT, • Contract Hire opportunity with career growth and stabilityJob Description, • Responsible for all quality activities including SPC, gage calibration, internal audits, capability studies, gage R, layouts, document control, and product inspections & tests., • Quality planning activities, including control plan development, gage design, selection of special characteristics, and PPAP submissions, • Responsible for all Final and First Article Inspections, • Manage and oversee the activities of all quality department personnel and machine operators, • Implementation of a solid corrective action system with follow-up to minimizing customer returns for the lowest R&A% possible, • Ensure compliance with company quality policies, procedures, and practices Qualifications and Requirements:, • 3+ years of relevant work experience in a quality management environment, • Thorough working knowledge of Quality Management Systems, SPC, PPAP, FMEA, DOE, and 8-D problem solving., • Experience with formal documentation systems and methods particularly ISO9001, • Strong interpersonal, analytical, organizational, and management skillsBenefits and Perks:, • $28-35 per hour, • Medical Benefits such as vision, dental, and health, • Growth opportunities in multiple areas, • Weekly pay through Direct Deposit Your New Organization:Work with a custom manufacturer specializing in deep drawn metal stampings for a variety of industries, including Aerospace, Automotive, Dental, HVAC, Medical, Irrigation, Ordnance, Plumbing, and Utility. The company offers high-quality and precise metal stamping solutions tailored to meet the unique needs of each industry. With a strong commitment to excellence they have established a reputation for reliability and innovation in the metal stamping industry.Your Career Partner:The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment.In the spirit of pay transparency, we want to share the base salary range for this position is $28-35 per hour not including benefits, potential bonuses or additional compensation. If you are hired, your base salary will be determined based on factors such as individual skills, qualifications, experience, and geographic location. In addition, we also believe in the importance of pay equity and consider the internal equity of our current team members as a part of any final offer. Please keep in mind that the range mentioned above is the full base salary range for the role. Hiring at the maximum of the range would not be typical in order to allow for future & continued salary growth #TRN510ZRCompany DescriptionThe Reserves Network is more than a staffing agency—we're a career partner. With a strong reputation for placing top talent across eight key specialties— Industrial & Manufacturing, Office & Professional, Accounting & Finance, Healthcare, Engineering, Executive & Management, Real Estate, and Information Technology—we prioritize your professional growth and job satisfaction. We offer personalized career guidance, access to exclusive job opportunities, and a supportive team dedicated to helping you reach your career goals. When you join The Reserves Network, you're not just filling a position; you're building a career with a company that values your skills and aspirations.The Reserves Network is more than a staffing agency—we're a career partner. With a strong reputation for placing top talent across eight key specialties— Industrial & Manufacturing, Office & Professional, Accounting & Finance, Healthcare, Engineering, Executive & Management, Real Estate, and Information Technology—we prioritize your professional growth and job satisfaction. We offer personalized career guidance, access to exclusive job opportunities, and a supportive team dedicated to helping you reach your career goals. When you join The Reserves Network, you're not just filling a position; you're building a career with a company that values your skills and aspirations.

Job Description Primary responsibility is the development of business opportunities within the aerospace, defense and government sectors for RBC products by cultivating, establishing and maintaining relationships within these sectors. Must identify new business prospects and coordinate with internal teams to meet the unique needs and requirements of all clients. Will have a high degree of technical knowledge of all aerospace, defense and government products including knowledge of design features, product performance parameters and product applications. Maintains a thorough understanding of the markets served by each product line. Must have detailed knowledge of the various organizations. Utilize company data, customer supplied information, and external sources intelligence to create appropriate files on major customers. Have familiarity of our direct and indirect competitors to each product line. This information is vital in producing business development strategies relative to marketing, pricing, sales growth, product development, and other key areas. This effort ties in directly with the gathering of market specific data. Develop product line forecasts as required. Principal Responsibilities • Market Analysis:, • Conduct research of Aerospace and Defense procurement trends, • Identify and analyze opportunities for expanding the company’s presence in these sectors., • Establishes and attains sales goals., • Business Development:, • Develop and implement strategic plans to target clients and secure contracts., • Establish relationships with key decision makers with all clients., • Coordinate the approval process of new opportunities., • Proposal Development:, • Collaborate with the technical and proposal teams to create compelling and compliant proposals for government solicitations., • Ensure proposals align with government regulations, requirements and specifications., • Contract Negotiation:, • Negotiate terms, conditions, and pricing with clients, ensuring compliance with company policies and client regulations., • Work closely with legal and finance teams to finalize contracts., • Customer Relationship Management:, • Build and maintain strong relationships with clients through regular communication and responsiveness to their needs., • Provide exceptional customer service and address any concerns or issues promptly., • Collaboration with Internal Teams:, • Liaise with Engineering, Production and Quality teams to ensure the successful execution of government contracts., • Communicate client requirements and specification to internal teams, facilitating seamless project delivery., • Compliance and Regulations:, • Stay informed of defense regulations, policies, and compliance standards relevant to aerospace manufacturing. Bachelor’s degree in business, engineering or marketing plus 10 years of experience in an engineering, sales or marketing environment preferably with experience with aerospace, defense and government business or any combination of experience, education and training which would provide the level of knowledge, skill and ability required to the satisfaction of the manager. Knowledge, Skills and Abilities • Marketing communication and promotion, • Product technical competence., • Manufacturing capabilities and capacities, • Market and Customer intelligence, • Strong Excel and Access skills, • Good interpersonal and communication skills., • Self-confidence and ability to work in a fast-paced environment, • Demonstrated ability to coordinate a high level of activity under a variety of conditions and constraints., • Excellent communication and interpersonal skills

Job Description Job Title: Engineering Manager Exempt Status: Exempt Location: Cheshire, CT Company Description: Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: This position will drive the research and development of manufactured parts. This includes the overall responsibility of ensuring that processes are delivered to the in-house customer on time and will be capable of routinely delivering the expected level of quality. This position is also responsible for ensuring that all manufacturing processes, programs, fixtures and tooling are operator friendly and that the manufacturing shop has proper engineering coverage to be able to respond and address questions to aid in the continual flow of product through the manufacturing process. Essential Functions: • Manage the research and development of manufactured product line ensuring competed processes will be delivered on time, and with a guaranteed quality level., • Ensure that the manufacturing shop has proper engineering coverage to respond and answer any question they might have., • Schedule the engineering staff in such a way to provide maximum efficiency, • Track the progress of each engineering discipline ensuring maximum effectiveness., • Engage in efforts to continuously improve the processes on the shop floor., • Actively participate in continuous improvement and safety initiatives across the organization., • Define Root Cause and Corrective Actions on components and designs that result with non-conformances and more importantly ensure that the proper action is implemented., • Implement all engineering changes from the customer in a timely manner to the Production Manager for proper flow., • Ensure that the engineering personnel are properly trained, and they continue to stay up to date with the latest techniques for manufacturing., • Directly supervises the employees in the Engineering Department. Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws., • Develop, implement, and maintain standard work procedures to ensure consistency, efficiency, and quality across engineering processes., • Perform other related duties or responsibilities as required. Required Qualifications & Experience: • Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data, • Bachelor’s degree in Manufacturing/Mechanical engineering or other related field, • 8+ years of experience in a Manufacturing environment, • 4+ years of management experience Desired Knowledge, Skills, and Abilities • Proficient in Microsoft Office Suite (Outlook, Word, and Excel), • Ability to communicate professionally and effectively with all levels of the organization, • Ability to interpret policies, procedures, and standard business practices, • Ability to read and interpret blueprints and engineering work instructions, • Ability to initiate, record, recommend, verify, and implement corrective actions or solutions to problems relating to product, process or quality system., • Knowledge of procurement procedures and authority to issue purchase orders for subcontracted services, • Knowledge of ISO 9002 standards and demonstrated ability to lead or support implementation initiatives to ensure compliance and maintain certification, • Must have strong attention to detail, • Ability to travel domestically – 5% max Physical Requirements: • Must be able to lift 35lbs, • Must be able to sit and stand for extended periods of time, • Must be able to go up and down stairs frequently Reasonable accommodations may be made to enable individuals with disabilities to perform. Hanwha Aerospace USA is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. Rev 1 – 8/27/2025

Job Description Drew Marine is a global leader providing technical solutions and services to the marine industry with a comprehensive line of advanced marine chemicals and equipment. Supported by a worldwide network of service engineers and a global supply chain delivering to more than one thousand ports, we have a portfolio of products and services including: Water Treatment, Fuel Treatment, Maintenance Cleaners, Welding & Refrigeration, Engineered Systems & Products, Onboard Test Kits, and Analytical Services. Drew Marine offers a competitive compensation package with the following benefits: • Medical, vision, and dental insurance starting on first day of employment., • Drew Marine Employee Savings Plan – Current Employer Match is 100% of the first 5% contributed., • Company paid Life Insurance, Short Term Disability and Long-Term Disability, • 26 Paid Days Off in the first year of employment (17 personal days + 9 holidays), • Flexibility in remote work (up to two days per week for positions that qualify), • Community engagement and volunteer opportunitiesJob Summary: The Senior Process Engineer is responsible for providing leadership, guidance, monitoring, and troubleshooting of plant processes. Identify areas of opportunity for process improvements, implementing upgrades and new technology. Coordinate activities involved in the implementation and completion of projects, including, but not limited to, design, scheduling, construction, and deliverables are met within safety, time, budget, and environmental parameters. This position collaborates closely with EH&S personnel and global manufacturing leaders and is a member of the NASA Supply Chain team. This position reports to the Operation Manager – US Manufacturing. Duties/Responsibilities: • Daily monitoring of production processes and active engagement with Operations staff to rectify issues., • Manage, organize, coordinate, and monitor activities/functions of development projects in cooperation with other departments and outside agencies, contractors, and design professionals., • Analyze and prepare written reports on program/project performance using graphs, diagrams, and other project management techniques., • Writing SOPs / Documentation for the utilization of chemical production equipment and batch processes, • Develop program/project budgets, schedules, work plans, and cost estimates/projections., • Participate in the negotiation of bids/contracts received from clients/contractors., • Demonstrate continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively/jointly to provide quality customer service., • Write prompt and accurate reports, organize meetings, and make presentations as may be necessary., • Approach engineering problems with a management-level approach when considering the needs of the business., • Liaison with QC & Applications and Product Development team on all testing and data requirements to ensure accuracy., • Active participation in plant management programs (ISO 9001 / 14001, MOC, RCRA, etc.), • Other duties and tasks assigned. Required / Desired Knowledge, Experiences and Skills: • Minimum 5 years of related full-time work experience at a chemical company, • Motivated, self-starter, accepting of responsibility, • Excellent verbal and written communication skills, • Strong organization, analytical, and problem solving skills, • Familiarity with chemical manufacturing equipment and monitoring devices, • Ability to read, interpret, and create P&IDs and engineering documentation, • Familiarity with hazard analysis and chemical process safety principles, • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists, • Proficient in Microsoft Office software, especially with Excel spreadsheets/graphs, • Ability to develop effective working relationships, • Ability to plan/manage complex projects, • Ability to meet deadlines, • Must be flexible and detail oriented, • Ability to priorities and meet deadlines, • Knowledge of Delta-V preferred, but not required, • Knowledge of Microsoft Project a plus, but not required, • Ability to travel domestically and internationally as may required to attend meetings, training, etc. (Approximately 5% or less of time), • Prior Six Sigma training a plus, but not required Education/Certifications: • Bachelor’s degree in chemical engineering or another related field required. Physical Working Environment: The position works in a climate-controlled office environment as well as a climate-controlled manufacturing/warehouse area and requires the ability to sit or stand for extended periods. Position requires 5%-10% domestic travel, with possible 5% international travel – must have or be able to obtain a passport. Along with other engineers and members of the staff, be available after normal business hours / weekends / holidays in the event of emergencies. The above statements describe the general nature of work and not intended as an exhaustive list of all responsibilities, duties, and skills the role requires. Drew Marine provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type. All employment decisions at Drew Marine are based on business needs, job requirements and individual qualifications without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionQC Manager | $28.00-35.00 per hour | Monday-Friday 7:00am-5:00pm |Contract to Hire What Matters Most • Competitive Pay of $28-35 per hour, • Schedule: Monday-Friday 7:00am-5:00pm, • Location: Watertown, CT, • Contract Hire opportunity with career growth and stabilityJob Description, • Responsible for all quality activities including SPC, gage calibration, internal audits, capability studies, gage R, layouts, document control, and product inspections & tests., • Quality planning activities, including control plan development, gage design, selection of special characteristics, and PPAP submissions, • Responsible for all Final and First Article Inspections, • Manage and oversee the activities of all quality department personnel and machine operators, • Implementation of a solid corrective action system with follow-up to minimizing customer returns for the lowest R&A% possible, • Ensure compliance with company quality policies, procedures, and practices Qualifications and Requirements:, • 3+ years of relevant work experience in a quality management environment, • Thorough working knowledge of Quality Management Systems, SPC, PPAP, FMEA, DOE, and 8-D problem solving., • Experience with formal documentation systems and methods particularly ISO9001, • Strong interpersonal, analytical, organizational, and management skillsBenefits and Perks:, • $28-35 per hour, • Medical Benefits such as vision, dental, and health, • Growth opportunities in multiple areas, • Weekly pay through Direct Deposit Your New Organization:Work with a custom manufacturer specializing in deep drawn metal stampings for a variety of industries, including Aerospace, Automotive, Dental, HVAC, Medical, Irrigation, Ordnance, Plumbing, and Utility. The company offers high-quality and precise metal stamping solutions tailored to meet the unique needs of each industry. With a strong commitment to excellence they have established a reputation for reliability and innovation in the metal stamping industry.Your Career Partner:The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment.In the spirit of pay transparency, we want to share the base salary range for this position is $28-35 per hour not including benefits, potential bonuses or additional compensation. If you are hired, your base salary will be determined based on factors such as individual skills, qualifications, experience, and geographic location. In addition, we also believe in the importance of pay equity and consider the internal equity of our current team members as a part of any final offer. Please keep in mind that the range mentioned above is the full base salary range for the role. Hiring at the maximum of the range would not be typical in order to allow for future & continued salary growth

Job Description RBC Bearings Incorporated (NASDAQ: ROLL) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 54 facilities, of which 38 are manufacturing facilities in 11 countries and our market capitalization is approximately $10.6 billion. JOB TITLE/LOCATION: Product Specialist – Oxford, CT Job Summary: The Product Specialist is responsible for developing sales for OEM Products for both existing and new customers, executing the strategic sales plan. Acts as a central point of contact between the assigned customers. Assures we meet customer needs and provide the highest level of value to the customer at all times, communicating and coordinating with all departments, ensuring the optimum results for RBC Bearings. Responsibilities: • Prepares and maintains quotes, contracts and responses for customers., • Contributes to business development and sales teams, supporting goals and priorities to achieve growth targets., • Supports resolution of identified customer issues and opportunities, identifying solutions to customer needs, working closely Quality, Production and Engineering., • Develops and maintains strong relations with customers through consistent contact including(customer visits, phone, etc.), • Collaborates routinely with field sales to ensure key customer initiatives are achieved and managed., • Supports the development and executes sales plan with the support of the Product Manager and Director., • Achieves a thorough understanding and knowledge of company products to provide support to customers., • Responsible for supporting the strategic sales plan, maximizing potential sales and profits for Sargent., • Communicates monthly status of the business and progression of strategic initiatives to senior management., • Supports Product Manager and Product Director with contract negotiations as needed., • Collaborates with functional departments (Engineering, Manufacturing, Production Control & Quality Control, Supply Chain) to respond to customer needs, • Acts as voice of customer within the company, • Develops and manages commercial and technical marketing data, and customer presentations, • Other duties as assigned by the supervisor., • Attendance is an essential function of this position Job Requirements: • Bachelor’s degree in engineering, marketing, finance or related field., • Basic understanding of RBC products and pricing., • Excellent oral/written communication skills, • Ability to handle tasks and prioritize with minor direction., • Computer proficiency with Excel skills., • 2-5 years of relevant experience. Education: • Bachelor’s degree required with major in engineering, marketing, finance or related field. We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

Job Description Job Title: CNC Machinist 1 Exempt Status: Non-Exempt Location: Cheshire, CT Company Description: Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: Plan and perform various CNC turning and milling operations to machine a variety of metal parts under the supervision of the Operations Manager.. Essential Functions: • Machine parts to specifications using machine tools such as lathes and milling machines, • Work from blueprints, engineering instructions, and specifications, • Setup, adjust and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations, • Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines, • Check parts to ensure that they are properly lubricated and cooled, • Measure, examine, and test completed units to defects and ensure conformance to specifications, using precision instruments such as micrometers, • Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter, • Maintain records and document in-process inspection data Required Qualifications & Experience: • Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data, • High School Degree or G.E.D, • 1+ years of experience Desired Knowledge, Skills, and Abilities • Precision Manufacturing Certificate preferred, • Must be able to read, write, understand, and speak English at a functional level, • Ability to communicate professionally and effectively with all levels of the organization, • Ability to interpret policies, procedures, and standard business practices, • Ability to read and interpret blueprints and engineering work instructions, • Ability to setup and operate CNC turning and milling machines, • Ability to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances, • Knowledge of G & M codes, • Ability to travel domestically – 10% max Physical Requirements: • Must be able to lift 35lbs, • Must be able to sit and stand for extended periods of time, • Must be able to go up and down stairs frequently Reasonable accommodations may be made to enable individuals with disabilities to perform. Hanwha Aerospace USA is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. 1st Shift, Monday - Thursday 5:00AM - 3:30PM

Job Description RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 52 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.6 billion. JOB TITLE/Location: Business Development Manager - Oxford, CT POSITION DESCRIPTION: The Business Development Manager for our Aerospace Division will drive strategic, profitable growth in the assigned market or market segments. Work closely with the sales organization, establish strategies to penetrate new target accounts and increase penetration at existing accounts. In addition, work closely with the divisional business development managers to establish the product road maps required for sustained profitable growth. Complete market research to help identify new market opportunities for growth. Travel as required to support associated projects and activities. ESSENTIAL FUNCTIONS OF THE JOB: • Complete and present market research and analysis for upper management, • Lead segment business development teams and distribute associated status reports, • Maintain an accurate status of major corporate level opportunities and projects, including activity history and next actions required, • Establish and build professional relationships with outside sales and divisional personnel to improve communication and drive business development, • Develop presentation and marketing materials to help the sales team promote the RBC value proposition to the target markets, • Collaborate with divisional personnel to drive online marketing initiatives, • Assist with developing proposals for major opportunities at target accounts, • Assist with managing contract negotiations with customers as assigned, • Act as an interface between the Customer Service, Sales, Engineering, and the plant to drive continuous customer service improvements, • Assist with other business development projects as assigned, • Position based in the our Corporate Office in Oxford, CT with moderate travel as required EDUCATION: • Bachelor’s Degree in Engineering or applicable Management Field preferred. EXPERIENCE: • Minimum 5 years of experience in Business Development, Sales or Sales Management for a manufacturing company, • Sales growth in assigned markets(s) (revenue and market share growth), • Key customer margin performance, • Customer vitality – Growth from new customers, • Customer Responsiveness – On time delivery of products and projects SKILLS / CERTIFICATIONS: • Bachelor’s Degree preferred, • Strategic thinking and analysis (pricing, market segmentation), • Able to manage/balance competing priorities, • Bearing Experience / Knowledge preferred, • Must have excellent computer skills and experience with Microsoft Windows applications (Excel, PowerPoint, etc.) RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

About Airgas Airgas, an Air Liquide company, is a leading U.S. supplier of industrial, medical and specialty gases, as well as hardgoods and related products; one of the largest U.S. suppliers of safety products; and a leading U.S. supplier of ammonia products and process chemicals. Through the passion and diversity of its 18,000 associates, Airgas fosters a culture of safety, customer success, sustainability and innovation. Airgas associates are empowered to share ideas, take initiative and make decisions. Airgas is a subsidiary of Air Liquide, a world leader in gases, technologies and services for industry and healthcare. Present in 60 countries with approximately 66,500 employees, Air Liquide serves more than 4 million customers and patients. Join us for a stimulating experience: At Airgas, you matter and so does the work you do. As a member of our team, you play an important role in the success of your team, making sure our products are created sustainably and delivered safely and efficiently. In turn, you’ll find a welcoming workplace where you’re valued for who you are and where you can fill your potential while growing a fulfilling career — whatever path you choose. How will you CONTRIBUTE and GROW? If you are seeking a company that values its employees, encourages growth and development ,and makes a global impact, Airgas is the place for you. Join our team and be a part of an organization that is shaping the future of the gas and welding industry while fostering a culture of excellence and innovation. As an Area Operations Manager at Airgas, your expertise in managing industrial gas plants takes center stage. You'll lead the way in overseeing gas production and distribution in your area, ensuring compliance, boosting efficiency, and championing safety. Working closely with branches, you'll streamline processes for consistent and effective gas filling and distribution. • Albany, Cheshire, Waterford or Worcester, • Frequent regional travel, minimal to no overnights, • Business travel by automobile up to 50% of the time The Manager, Area Operations actively participates as a member of the Area Leadership Team (VP Operations, Safety Director, Area Vice President, Area Branch Operations Coordinator and District Managers) providing strategic and tactical coordination and implementation of site operations, safety and regulatory compliance, and policy/procedural updates. • Provides support to the Area Leadership Team with asset management reviewing production planning, stocking parameters and asset management to ensure efficient supply chain and inventory management. Assists in the sourcing and capacity planning to ensure timely production and delivery of products as it pertains to cylinders, pallets, and trucks. Develops capital expenditure budget(s) and coordinates capital expenditures., • Reviews production plans and operational schedules for operations and manufacturing activities assisting in establishing priorities, the sequencing of manufacturing products, and assuring quality specifications are met., • Drives improvements to Key Performance Indicators (KPI's). Compiles, analyzes and reviews production and operating reports and helps to improve/resolve operational, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays., • Communicates routinely with the Area Leadership Team regarding progress, obstacles, issues and improvements impacting the business. Conducts routine visits to facilities to evaluate performance, safety, compliance and training gaps. Inspects machines and equipment to ensure specific operational performance and optimum utilization., • Provides leadership regarding safe work habits assuring plant monthly safety meetings are conducted and attends meetings to reinforce the safety message and create a positive safety culture. Coordinates annual safety meeting for the area with the Area Leadership Team., • Provides leadership and guidance on Airgas's incident review committee and supports the development of safety improvement plans., • In coordination with the Area Leadership Team, develops and communicates site procedures and reports, maintains registrations and permits maintaining compliance with Occupational Safety & Health Administration (OSHA), Department of Transportation (DOT), Environmental Protection Agency (EPA), Food & Drug Administration (FDA), state regulations and Airgas Policies & Standard Operating Procedures (SOPs)., • Develops or revises standard operational and working practices specific to the site. Coordinates with the ABOC to assure operations procedures, SAP procedures and training are applied., • Direct responsibility for ensuring plant associates are trained in SMS, Department of Transportation (DOT) and other regulatory policies and operations areas. Supports branch associates with same training., • Assists with review of delivery sites and standards to assure safe deliveries., • Leads in accordance with company policies by hiring, training, motivating, planning and directing work, managing performance and resolving associate issues., • Provides customer support for operational requirements including site visits as needed. Are you a MATCH? • Undergraduate Business, Engineering, Operations Management degree or degree in a related area of study required. In lieu of degree requirement, may accept an additional four years of related experience in addition to the required experience minimum., • Minimum of 10 years of increasing responsibility in manufacturing operations or related experience., • Demonstrated knowledge of the following areas: compliance with applicable federal/state regulations, gases and related hard goods, DOT regulations, truck and trailer loading limits, cylinder markings, test dates, pressure ratings, ICC markings, placarding, hazardous material classifications, DOT driver qualifications and record keeping, vehicle purchasing and maintenance requirements, accident reporting, and safety and compliance., • Considerable independent judgment and initiative are required in resolving problems and making recommendations; demonstrated ability to balance customer service and cost of service issues; demonstrates tact and diplomacy in dealing with internal and external customers and with handling proprietary information., • Achieves results with a sense of urgency addressing the time sensitive needs of customers, sales, customer service and other operations personnel - including daily urgent delivery needs., • Financial acumen for articulating ROC, and other metrics utilized by business professionals when considering inventory purchases., • Strong project management skills., • Strong interpersonal skills with the ability to influence others and to create cross-functional alignment., • Must possess excellent communication skills, especially in the development of actions plans and to ensure accountability and follow through., • Must be proficient with SAP utilization and system capabilities., • Working knowledge of Microsoft Word, Excel, Outlook and PowerPoint., • Requires use of computer, telephone and operation of a motor vehicle.., • Must be able to occasionally work outdoors in temperatures ranging from -10 to over 100 degrees. Benefits We care about and support all Airgas associates. This is evident not only through our competitive compensation but also through a comprehensive benefits package that includes medical, dental, and vision plans, vacation, sick time, floating holidays, and paid holidays for full-time employees. We provide a progressive parental leave package for our eligible Airgas parents, offering generous paid time off for the birth or placement of children. Additionally, we offer our employees a 401k plan with company matching funds, tuition reimbursement, discounted college tuition for employees’ dependents, and an Airgas Scholarship Program. Your DIFFERENCES enhance our PERFORMANCE At Airgas, we are committed to building a workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. We welcome and consider applications from all qualified applicants, regardless of their race, gender, sexual orientation, religion, disability or any other protected characteristic. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world. Equal Employment Opportunity Information We are an equal opportunity employer. We welcome all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic. Airgas, an Air Liquide Company is a Government contractor subject to the Vietnam Era Veterans’ Readjustment Assistance Act of 1974 and Section 503 of the Rehabilitation Act of 1973. Airgas does not discriminate against qualified applicants with disabilities, and is committed to providing reasonable accommodations to the known disabilities of such individuals so as to ensure equal access to benefits and privileges of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact us by email at . California Privacy Notice

Job DescriptionCatholic Charities is seeking a full time (35 hours per week) Client Care Specialist POSITION SUMMARY Position supports behavioral health operations at clinic locations, managing client access to mental health and other treatment services. Customer service skills, computer skills and navigating electronic medical records are provisions of the position. Position requires flexibility in working within a team environment to support clients, managers, and clinical staff. The Client Care Specialist reports to the Office Manager of the location. IHF Client Care Specialists report to the location’s Practice Manager. GENERAL DUTIES AND RESPONSIBILITIES: Customer service to internal and external customers/clients. Assist clients to feel welcome and supported in a confidential manner. Must remain calm and composed in a high paced environment when working with the general public. Must be able to request payment of fee(s) in a business-like manner without embarrassment or exerting pressure. Manage client payment accounts. Possess the ability to maintain a good rapport with staff, remaining pleasant under pressure. Accept and manage incoming calls to office location, schedule appointments, relay information, and navigate with the client’s wellbeing in mind. Triage potential client crisis and connect with managerial/clinical staff. Translation of services for Spanish speaking clientele. Oversee client waiting area to maintain safety, comfort, and confidentiality. Process point of entry, intake information within our EMR and schedule services based on credentials of staff and needs of the clients. Responsible for outgoing mail and the sorting and distributing of incoming mail. May be required to substitute for or share duties with other operations staff when necessary. Position scheduled during operational hours of the clinic location QUALIFICATIONS: Graduation from high school or GED equivalent with specialized course work in general office practices, computer skills. Knowledge of basic math and ability to prepare written reports is required. Must possess friendly effective communication skills with clients, staff, and the general public. Spanish speaking required. EMPLOYEE BENEFITS Catholic Charities offers access to a comprehensive array of benefits, including: For Good Health: Medical, Prescription, Dental and Vision insurance For a Secure Future: Life, AD&D and Long-term disability insurance For Retirement: 403(b) Plan, with employer matching contributions for eligible employees For Career Advancement: Training and development opportunities For Work Life Balance: Generous paid time off; including vacation and sick time. Employee Assistance Program (EAP) - Free and confidential counseling Catholic Charities Inc., Archdiocese of Hartford is in compliance with all applicable discrimination laws. All hiring, promoting, and transferring is done on a non-discriminatory basis without regard to membership in any protected class. EEO/ AA/ M-F/ VET/ DISABLED.

Authorized Volvo Dealership in Central CT requires a hands-on Manager to implement and maintain effective, profitable processes, ensure Customer satisfaction and personnel development. Top pay and benefits for the right candidate. Email or fax resume in confidence

Start your career with Enterprise Mobility! We're hiring for our respected Management Training Program. Whether you see yourself in sales, business development, customer service, retail management, or operations, as a manager in training, you can count on a career path with a clear beginning and an

JD Sports - JR10007290 [ASM / Store Supervisor] As an Assistant Store Manager and Supervisor at JD Sports, you'll: Support the Store Manager in all aspects of daily execution of customer service, sales, and development of personnel; Train and coach store associates to promote and execute team, store

Job Description Overview UP to a $10K Recruitment Bonus Available H1B Visa Transfer Eligible to apply! Are you ready to take your career to new heights? At Concentra, you will be a vital member of our patient care team and play a crucial role in providing exceptional care to our patients. Our mission is to improve the health of America's workforce, one patient at a time. Join us at Concentra and see how your clinical competency and compassion can make a meaningful difference in the lives of the patients you serve. As a Physical Therapist, you will perform supervisory duties and evaluations on patients and helps them improve basic motor functions and reasoning abilities, but also compensate for permanent loss of function by teaching them to perform tasks in their daily living and working environments, in accordance with Concentra Medical Centers’ Injury Process Management and Concentra Medical Centers’ philosophy of rehabilitation in occupational medicine. Responsibilities • Ensure delivery of high quality patient care services, • Perform direct patient care, including evaluation of muscle, skeletal, neurological and other physical problems, • Support and encourage multidisciplinary coordination of treatment, • Ensure proper documentation of patient care, • Maintain professional standards through compliance with quality assurance policies/ procedures as well as applicable regulations and corporate policies, • Implement effective communication with own and other departments' staff, with medical staff and patients to ensure coordinated efforts and provision of high quality service and optimal patient care, • Demonstrate effective problem-solving and conflict-resolution abilities, • Inform Administrator of department problems, needs and solutions in a timely manner, • Plan, design, implement and interpret specific physical therapy treatment programs for patients to facilitate the patient's recovery and attainment of maximum physical potential, • Educate patients in the proper care and use of supports and performance of exercise programs, • Perform or delegate patient treatment to include modalities, therapeutic exercises, gait training and hydrotherapy, • Follow appropriate documentation and reporting procedures, • Secure prescription for each patient treated, • Work closely with the physician to ensure comprehensive delivery of services and quality patient care, • Assist marketing staff with tours as necessary, • Take all necessary precautions to protect center assets and property against loss or waste through negligence or dishonesty, • Participate in professional development by attending center meetings and outside educational seminars, • Communicates with the Outcome Assurance Injury Coordinator or the Case Manager for each patient, • Communication regarding the patients’ objective progress, compliance with the program, compliance with attendance of scheduled appointments, the therapist’s estimated time frame until discharged from therapy, • Participates in clinical instruction of university occupational therapy and/or occupational therapist assistant students, • Participates with the evaluation of the effectiveness of the rehabilitation quality management process and assist in new and improved processes Qualifications • Bachelor’s Degree from an accredited Physical Therapy program, • Customarily a new graduate to at least five years of demonstrated experience in an orthopedic setting with use of modalities, therapeutic exercises and isokinetic equipment, • Concentra Core Competencies of Service Mentality, Attention to Detail, Sense of Urgency, Initiative and Flexibility, • Ability to make decisions or solve problems by using logic to identify key facts, explore alternatives, and propose quality solutions, • Outstanding customer service skills as well as the ability to deal with people in a manner which shows tact and professionalism, • The ability to properly handle sensitive and confidential information (including HIPAA and PHI) in accordance with federal and state laws and company policies, • Demonstrated willingness to participate in initial and ongoing training as required.•, • Demonstrated effective communication and interaction with employers, patients, providers and other employeesDemonstrated ability to maintain working relationship with all levels of employees, • Demonstrated excellent customer service skills, • Demonstrated computer skills, • Knowledge of common safety hazards and precautions to establish a safe work medical environment, • Skill in developing and maintaining patient care records and writing reports, • Skill in time management, planning and workload control, • Skill in identifying problems and recommending solutions, • Skill in developing and maintaining medical quality assurance and quality control standards, • Skill in establishing and maintaining effective communication and working relationships with Management, patients, medical staff and the general public, • Must successfully complete orientation and training as well as demonstrate competency in all required physical therapy tasks

Job DescriptionAbout the Role Centurion Wealth Management is seeking an experienced Financial Advisor with an established book of business to join our firm. This is an opportunity to take your practice to the next level under our independent wealth management platform, benefiting from our resources, investment solutions, and operational support while maintaining autonomy in managing your client relationships. Key Responsibilities • Manage and grow your own book of business under the Centurion Wealth Management umbrella, delivering high-touch financial planning and investment management services., • Build and maintain strong client relationships by developing customized financial strategies tailored to their unique goals., • Provide comprehensive financial planning, including retirement, tax-efficient investing, estate planning, and risk management., • Leverage our advanced technology, investment platform, and research to enhance client service and portfolio management., • Identify new business opportunities through referrals, networking, and strategic partnerships., • Maintain compliance with industry regulations and firm policies while upholding the highest standards of client care. Qualifications & Skills • Experience: Minimum 5 years as a financial advisor, wealth manager, or similar role., • Book of Business: To be considered you MUST have an established client base that can transition with you and a proven track record of growth and retention., • Licensing: Series 7, Series 66 (or 65 & 63), and appropriate state insurance licenses required. CFP®, CFA®, or other relevant designations preferred., • Client-Centric Approach: Strong relationship management skills and a commitment to exceptional client service., • Business Development: Ability to expand your practice through referrals, marketing strategies, and professional networking. Why Join Centurion Wealth Management? • Independent Platform: Operate under the Centurion Wealth Management brand while maintaining control over your client relationships and retaining full equity in your practice., • Competitive Compensation: Attractive payout structure with transition support for your existing book., • Comprehensive Support: Access to top-tier financial planning tools, investment research, and dedicated operational support., • Scalability & Growth: Resources to help you scale your practice, acquire new clients, and enhance service offerings. If you are a seasoned financial advisor looking for a platform that values independence, offers robust resources, and supports your long-term growth, we would love to connect. Apply today to explore how Centurion Wealth Management can be the right fit for your practice. Powered by JazzHR 7M1lvd4obk

KFC - 115 bridge street [Restaurant Manager] As a General Manager at KFC, you'll: Lead by example with high standards in customer service, food quality and cleanliness; Mentor and coach team effectively through training and development resources; Build a team through selecting and onboarding new hir

KFC - 717 lakewood road [Restaurant Manager] As a General Manager at KFC, you'll: Lead by example with high standards in customer service, food quality and cleanliness; Mentor and coach team effectively through training and development resources; Build a team through selecting and onboarding new hir

Liaise with Engineering, Production and Quality teams to ensure the successful execution of government contracts. Bachelor's degree in business, engineering or marketing plus 10 years of experience in an engineering, sales or marketing environment preferably with experience with aerospace, defense a

KFC - 115 bridge street [Restaurant Manager] As a General Manager at KFC, you'll: Lead by example with high standards in customer service, food quality and cleanliness; Mentor and coach team effectively through training and development resources; Build a team through selecting and onboarding new hir

Shake Shack - 2053 Highland Ave [Restaurant Supervisor] As a Restaurant Manager at Shake Shack, you'll: Be responsible for leading and driving the daily operations; Manage the kitchen and dining room; Oversee the development of all team members; Complete administrative tasks.

Senior Audit Manager We are a fast-growing public accounting firm with a reputation for excellence, innovation, and a people-first culture. Our team is dedicated to delivering high-quality service to clients while fostering an environment where professionals can thrive and grow. As a Senior Audit Manager, you will: * Lead and manage audit engagements for a diverse portfolio of clients. * Supervise, coach, and mentor team members, ensuring their professional development. * Build and strengthen client relationships through proactive communication and insights. * Play a key role in shaping engagement strategy and ensuring quality standards. Qualifications: * Bachelor's degree in Accounting, Finance, or related field. * CPA license required (or actively pursuing). * 7+ years of progressive audit experience in public accounting. * Strong leadership, communication, and project management skills. * Ability to manage multiple priorities and deliver exceptional client service. What We Offer: * A collaborative culture that values your ideas and contributions. * Clear opportunities for advancement as our firm continues to expand. * Flexible work arrangements and a supportive leadership team. * A chance to make an impact while growing your career with a firm on the rise. If you are a driven audit professional ready to take the next step in your career, we'd love to meet you. #LI-JL1 Senior Audit Manager Senior Audit Manager Senior Audit Manager Senior Audit Manager Senior Audit Manager Senior Audit Manager Senior Audit Manager

Job DescriptionDetails: Posted: September 17, 2025 Level: Community College Professional 17, 12-month, tenure track position. Hours: Full-time, 35 hours per week Closing Date: Applications must be submitted by 5:00pm (EST) on Wednesday, October 15, 2025. Location: CT State Naugatuck Valley 750 Chase Pkwy, Waterbury, CT 06708 This position is not remote For more information about CT State Community College and the campus please visit Home - CT State CT State Community College Mission: Connecticut State Community College provides access to academically rigorous and innovative education and training focused on student success. The college supports excellence in teaching and learning, makes data-informed decisions, promotes equity, and advances positive change for the students, communities and industries it serves. CT State Community College Vision: Connecticut State Community College is recognized for exceptional student success, educational leadership and transformative collaboration with business and industry, government, educational and key stakeholders while advancing diverse opportunities for Connecticut’s citizens and communities. CT State Community College Equity Statement: Connecticut State Community College commits to bold and disruptive change by actively identifying, naming, and dismantling structural racism, systemic poverty, and other barriers; establishing equitable and anti-racist policies and practices; and empowering students, faculty, staff, and administrators to advance racial, social, and economic justice. Our core collective responsibility is to continuously assess practices and policies and transform the world we live in by eliminating inequities. Anticipated Start Date: December 2025 Position Summary: The Coordinator of Administrative Information Technology performs and supervises the operation and maintenance of a complex administrative computer-based system at a Community College where the work of administrators, faculty and staff is supported by computerized services. The administrative computing system includes assistance for such functions as student records, admission, financial aid, counseling and business office operation. The College's information technology services are assisted by the centralized System Data Center which uses the Banner administrative system, requiring the Coordinator of Administrative Information Technology to utilize and adapt that system to the College's administrative computing services. The position may serve as the designated Banner system technical coordinator. Example of Job Duties: Under the direction of the Director of Information Technology or other administrator, the Coordinator of Administrative Information Technology is accountable for assuring the effective functioning of administrative computing services in support of the College's various administrative offices including Registrar, Admissions, Business and Finance, Counseling, Human Resources, Financial Aid and Student Services through effective performance in these essential areas: • Training, development and supervision of assigned staff., • Accountable for providing training and guidance to assigned staff and student workers to contribute to their proficiency in the skill areas necessary for their effective job performance., • Operation and maintenance of computer-based administrative systems., • Accountable for assuring the reliable operation of the College's administrative computing system, and when assigned, the messaging/email systems in support of college-wide administrative and student services., • Automation of administrative functions., • Accountable for analyzing and developing automated methods of performing administrative and student services work., • Training and guiding users in applying administrative systems. This posting includes qualifications, experience and skills but is not limited to the full specifications stated in the job description. Minimum Qualifications: Associate's degree in computer science or related technological discipline together with two (2) or more years of experience in computer system and software design, development and implementation; or a combination of education, training, and experience which would lead to the competencies required for successful performance of the position's essential duties. Incumbents are required to have demonstrated advanced knowledge and abilities in the following: • Computer hardware and software, local area networking, software design and development, and equipment assembly and installation., • Application of computer hardware and software systems in administrative services., • Installing, operating, adapting, diagnosing and repairing malfunctions in computer equipment and software, including complex software systems such as the Banner system., • Three (3) or more years of demonstratable experience with Cisco network equipment or CompTIA Network+ certification., • Three (3) or more years of demonstratable experience with Extron/Crestron A/V equipment and Extron/Crestron certifications., • Three (3) years of hands-on troubleshooting/repairs with Dell hardware and/or Dell technician or CompTIA A+ certifications., • Experience in the integration and support of IT Infrastructure Hardware & Software Systems in an educational environment., • Experience with supporting Cisco Unified Communications Manager (CUCM)., • Experience with enterprise level application support. We offer a comprehensive benefits package to help you stay well, protect yourself and your family, and plan for a secure future. Benefits include generous leave policies; several retirement plans; and many choices for comprehensive health insurance. You also have access to many additional benefits to save for retirement, protect your family & more with supplemental benefits. Tuition reimbursement may apply if applicable. For more information, please visit our website at: CSCU - Human Resources - Future Employees. Application Instructions: To apply you must submit a cover letter and resume. The cover letter may be entered as text in the corresponding box, or it can be uploaded as a combined file with the resume. Incomplete applications or those submitted after the closing date will not be considered and links to other sources to view resumes are not acceptable. To apply via our website, visit . Selection Procedure: Following the closing date, application materials will be evaluated by a selection committee. Candidates selected for further consideration will be limited to those applicants who are best qualified based on the minimum and preferred qualifications and who have submitted all the required documents by the closing date and time listed on the job announcement. Candidates who have been selected and approved to interview will be contacted, and finalists will be recommended for further consideration by the Hiring Manager for final selection and recommendation for employment. The selection process may also include practical exercises (i.e., teaching demonstration and/or other written, technical, manipulative, or simulation exercises) to evaluate candidates' qualifications. Background Screening: All employment, if offered, is contingent upon proof of citizenship or employability under the requirement of the Immigration and Control Act (IRCA) and the successful passing of a background check, including granting permission to contact current and previous employers for verification. CSCU is committed to providing a safe campus community. Background investigations include reference checks, a criminal history record check and, when appropriate, a financial (credit) report or driving history check. Continuing Notice of Nondiscrimination CT State Community College does not discriminate on the basis of age, ancestry, color, national origin, gender identity or expression, genetic information, learning disability, marital status, intellectual disability, physical disability (including but not limited to blindness), present or past history of mental disability, prior criminal record, race, religious creed, sex (including pregnancy and sexual harassment), sexual orientation, retaliation for previously opposed discrimination or coercion, veteran status, victims of domestic violence, sexual assault, and/or trafficking or any other federal or state protected class in its employment, programs, and activities, unless the provisions of Section 46a-80(b) or 46a-81(b) of the Connecticut General Statutes are controlling or there are bona fide occupational qualifications excluding persons in one of the above protected groups. For information regarding the nondiscrimination, disability, and Title IX policies/procedures, contact: John-Paul Chaisson-Cardenas, Vice President for Diversity, Equity, and Inclusion, CT State Community College, 185 Main Street, New Britain, CT 06051, 860-612-7056 or . CSCC IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER. Powered by JazzHR BKBfrFwx9S

Overview To be part of our organization, every employee should understand and share in the YNHHS Vision, support our Mission, and live our Values. These values - integrity, patient-centered, respect, accountability, and compassion - must guide what we do, as individuals and professionals, every day. At Bridgeport Hospital, we are committed to providing quality medical care and treatment that is coordinated and centered on the patient's specific needs. We strive to achieve benchmarks as a Patient Centered Medical Home and provide health care in a setting where patients are at the center of their care team. All employees of Bridgeport Hospital are part of the patients care team and contribute to the team approach of promoting access, continuous, comprehensive care and work to provide quality improvement in the care provided to their patients. Works collaboratively with the NM displaying leadership in management, clinical practice, performance improvement and staff development in accordance with the overall philosophy and goals of Patient Care Services. In the absence of the NM, he/she is responsible for the direction of patient care as well as patient care activities, unit operations, and staff functions. Essential duties and responsibilities include the following. Other duties may be assigned. EEO/AA/Disability/Veteran Responsibilities - 1. Demonstrates advanced skill in assessment of health care needs. - 1.1 Demonstrates advanced skills in interviewing, observing and collecting healthcare data, performing a systems assessment and identifying patient support systems on admission according to hospital policy. - 2. Demonstrates advanced skill in planning for patient health care needs. - 2.1 Initiates Interdisciplinary Plan of Care (IPOC) utilizing information from initial assessment and guidelines for nursing care according to hospital policy. - 3. Demonstrates advanced skills in implementation of care to meet patient care needs. - 3.1 Prioritizes patient care based on assessments. - 4. Demonstrates advanced skill in evaluating care delivered. - 4.1 Assess patient responses to healthcare interventions based on expected outcomes. - 5. Documents outcomes appropirately, accurately, and consistenly. - 5.1 Actively assists Nurse Manager with monthly/weekly documentation reviews. - 6. Demonstrates advanced leadership skills. - 6.1 Displays advanced knowledge and proficiency in the delivery of patient care and serves as resource for staff. Qualifications EDUCATION Graduate of an accredited School of Nursing. Baccalaureate education - nursing major preferred. Degreed ANM must earn 10 contact hours annually. Non-degreed ANM must complete 6 credit hours towards a bachelor's degree and 6 contact hours annually. EXPERIENCE Minimum of 2 years as a Registered Nurse in an acute care setting preferred. LICENSURE Licensed and a currently registered nurse in the State of Connecticut. All newly hired Registered Nurses must have a current BCLS certification or obtain within one month of hire. SPECIAL SKILLS Demonstrated leadership abilities Demonstrated interpersonal skills PHYSICAL DEMAND Requires prolonged standing; walking; use of sight,hearing and touch; moving/lifting patients of varying weights. Additional Information Minimum of 2 years of intraoperative RN experience required. Leadership experience preferred. Monday through Friday YNHHS Requisition ID

Job Description Join a Top Workplace Company 6 years in a row! Autism Behavioral Health has three center locations around Connecticut: Danbury, Trumbull, and Waterbury. Services are also provided in home and community settings throughout the state. We work for and with children and families affected by Autism Spectrum Disorder, spreading autism awareness and acceptance to the community and populations we serve. ABH was established to meet the increasing demands of parents and caregivers of children with ASD. We strive to make a positive difference in the lives of our clients by providing treatment interventions that foster personal development and facilitate living a full, dignified life. Company-provided Registered Behavior Technician training and testing are available for employees after 30 days. Behavioral Technician Job Responsibilities: The Behavior Technician is responsible for providing ABA services to children diagnosed with Autism Spectrum Disorder under the management of the agency's Clinical Manager. Behavior Technicians will provide Applied Behavior Analysis (ABA) treatment, including behavior management, discrete trial training, pivotal response training, and social skills development. The Behavior Technician will follow through with the appropriate services determined by the Clinical Manager. Data will be collected using an accurate and proper data collection system throughout each session. Lastly, the Behavior Technician will attend to other duties as assigned or approved by the Clinical Manager. Behavioral Technician Job Requirements: Preference for a degree in Psychology, Sociology, Child Development, or other related fields. If you have a high school diploma and have completed your RBT, please also apply. You can also complete your RBT with us; it will need to be done before working with any clients directly. You are self-motivated, responsible, honest, articulate, and can work independently with minimal supervision. We ask that the behavior technician also present a professional demeanor, be well-organized, be detail-oriented, and have excellent time management skills. You can maintain professional boundaries, composure, and work well under pressure. Be able to serve culturally and linguistically diverse families in low and high-socioeconomic status areas. You are comfortable working in homes (studio apartments, housing projects, etc.) of families with limited resources. You can politely interact with individuals and families who may be uncooperative or aloof. You can maintain professionalism if and when a client engages in aggression, self-injury, tantrums, screams, etc. Implement behavior modification strategies and discrete trial teaching under the Clinical Manager. Effectively communicate with others (clients, family members, agency staff, etc.) Be able to accept, follow, and implement direction from agency representatives. You are creative, spontaneous, animated in your gestures, facial expressions, and voice intonation. Finally, you must be able to stand, sit, twist, kneel, bend over, crouch down, walk, and sit/play on the floor for an extended period. You must also be able to lift, push, and pull up to 40 pounds without assistance from another adult. You must also have reliable transportation and current liability insurance for the vehicle.

Job DescriptionBenefits: • Commission, • 401(k), • Bonus based on performance, • Competitive salary, • Dental insurance, • Donation matching, • Employee discounts, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance Luna Wireless is one of the largest Authorized T-Mobile Retailers in the US! Seeking candidates with a hustle and ambition for unlimited potential. If you want to earn unlimited commissions while working in a fun, fast-paced environment, Luna Wireless is the place to be! Se prefieren hablantes bilinges de espaol, pero no se requieren. Why Join Our Team? Do you have whhat it takes to be a game changer? Come join a winning culture and team! #LimitlessPotential #CareerGrowth #ConnectedCulture Be unstoppable with us! Job Overview The Retail Associate Manager works in partnership with the Store Manager to lead and develop the store team to deliver T-Mobiles aspirations of earning a place in our customers hearts and Mobile Associate success. Job Responsibilities: • Responsible for infusing every stores Mobile Associate s with a passion for T-Mobiles Manifesto by thoroughly orienting and grounding them to a standard of Loving Our Customers., • Ensure that every need the customer has, when coming into the store, is met and that employees build the customers confidence by making their experience comfortable, simple and by solving the whole problem., • Complete observations of Mobile Associate s interactions with customers, including feedback, to be used in development, training & coaching conversations., • Effectively manage customer wait time. Keep current on products, services, and promotions., • Lead by example, staying up to date on the latest products, services, training, and leadership best practices to remain an expert resource to the team. Interact directly with Mobile Associate s to ensure they meet and/or exceed defined, monthly success measurements completing assigned training on time., • Assist in maintaining the quality of the overall store environment and adhere to national plan-o-gram standards. Use visual displays and interactive devices effectively. Keep visual displays and devices current. Assist in the execution of Retail Methods & Procedures., • Ensure team knowledge of store systems. Ensure that teams are knowledgeable about corporate and store communications. Deliver financial results based on key performance indicators. Identify ways to manage and control store expenses. Manage discounting and credits.The experience youll bring:, • 1 year customer service and/or sales experience, retail environment preferred, • Available to work a varied schedule including nights, weekends, and holidays, • Ability to lead and mentor people to deliver great results, • Competitive base pay, plus commissions, • Benefits for part-time and full-time employees, • Medical, dental and vision benefits, • 401K Plan, • Generous paid time-off programs, • Phone service discounts, • Serious growth potential for your career Requirements: • At least 18 years of age, • Legally authorized to work in the United States, • High School Diploma or GED #NeverStopGrowing Luna Wireless doesnt have a corporate ladderits more like a jungle gym of possibilities! We love helping our employees grow in their careers, because its that shared drive to aim high that drives our business and our culture forward. Dont meet every single requirement? Studies have shown that women and people of color are less likely to apply to jobs unless they meet every single qualification. At Luna Wireless we are dedicated to building a diverse, inclusive, and authentic workplace, so if youre excited about this role but your past experience doesnt align perfectly with every qualification in the job description, we encourage you to apply anyways. You may be just the right candidate for this or other roles. At Luna Wireless, A T-Mobile Premium Retailer, we strongly encourage everyone, including people of color, veterans, military spouses, individuals with disabilities, lesbian, gay, bisexual, transgender, queer and non-binary people, and parents to apply. We are an equal opportunity employer and welcome everyone to our team.

Job Description Haynes Development is seeking an experien ed construction project manager who orchestrates construction projects, responsible for ensuring its successful completion from start to finish. His/her role is comprehensive, demanding a blend of leadership, technical knowledge and organizational skills. KEY ROLES AND RESPONSIBILITIES: Project Planning and Scope Definition: *defining project objectives, scope and deliverables *developing detailed project plans, including schedules, budgets and resource allocation *conducting feasibility studies and risk assessments Budget Management: *creating and managing project budgets *monitoring expenses and controlling costs *forecasting potential cost overruns and implelmenting corrective measures Schedule Management: *developing and maintaining project schedules *monitoring progress and ensuring adherence to timelines *identifying and mitgating potential delays Team Leadership and Coordination: *leading and motivating project teams *coordinating the work of subcontractors, suppliers and other stakeholders *facilitating communication and resolving conflicts Quality Control: *ensuring that work meets quality standards and specifications *conducting inspections and addressing deficiencies *implementing quality control procedures Safety Management: *ensuring compliance with safety regulations and protocols *promoting a safe working environment *addressing safety hazards and incidents Contract Management: *reviewing and managing contracts *negotiating with subcontractors and supplies *ensuring compliance with contract terms Client Communications: *Maintaining regular communication with clients *providing project updates and addressing concerns *building and maintaining strong client relationships Risk Management: *identifying and assessing potential risks *develo0ping and implementing risk mitigation strategies *responding to unexpected events Documentation and Reporting: *maintaining accurate project documentation *preparing and submitting report to stakeholders *ensuring proper record-keeping QUALIFICATIONS: *minimum of 5 years experience as a construction project manager for multiple projects with experience in both commercial and residential build *PROCORE a plus *Proven ability to maintain accurate documentation *Communication skills Haynes offers excellent medical, dental and vision plans; 401K with match; generous PTO. Help us build the next QUARRY WALK!

Job Description ELIGIBLE CANDIDATES MUST LIVE IN THE DALLAS/FORT WORTH/OKLAHOMA CITY TERRITORY TO APPLY JOB SUMMARY: Post University seeks a highly skilled Strategic Partnerships Manager (SPM) to join our rapidly growing team. This business development position will support our healthcare partners' educational goals through outreach, promotion, and onsite activities. Your exceptional relationship-building, people skills, and ability to uncover strategic opportunities for partner and organizational success will be utilized as you represent the organization at various engagements, including educational fairs, orientations, presentations, regional and national conferences, and other meetings/events. We seek self-motivated, self-disciplined, and enthusiastic team members to position Post University as the desired destination for working nurses and healthcare professionals to continue their education. To perform this job successfully, you must possess a sales mentality, an altruistic personality, and the ability to uncover, recognize, and seize strategic opportunities. Reporting to the Regional Director of Strategic Partnerships, the SPM will work with a team of focused, passionate individuals who share the same goals while leveraging their knowledge and experience within the higher education industry. TERRITORY: Remote, Dallas/Fort Worth/Oklahoma City area. The position REQUIRES residence within the designated territory. The schedule is Monday through Friday with weekends as required. RESPONSIBILITIES: • Develop and attend events at partner and other healthcare facilities to market programs, generate inquiries and referrals, and deepen/expand relationships that lead to enrollments., • Procure new partnerships, nurture existing relationships, and maintain a consistent pipeline of prospective partnership opportunities., • Meet with current and prospective partners to understand their goals and develop student-facing activities to support those goals., • Meet and exceed monthly events and lead goals within the assigned partnership base., • Maintain and document activity in CRM, and adhere to all internal requirements for documentation, processes, and regulatory requirements., • Completes other duties as assigned. MINIMUM QUALIFICATIONS & COMPETENCIES: To perform this job successfully, an individual must perform each essential function satisfactorily. The requirements listed below represent the knowledge, skill, and performance required. Reasonable accommodations may enable individuals with disabilities to perform the essential functions. • You must reside in a major metropolitan area within the assigned territory., • BA/BS in a directly relevant discipline - a master's degree is a plus., • 3-5 years of successful B2B sales/business development experience., • 2+ years providing educational services and benefits are a plus., • Have/can establish strong relationships within healthcare and other key industries., • Ability to quickly build rapport, inspire trust; and engage diverse populations in individual and group environments., • Experience presenting to/interacting with audiences at all levels, including executive., • Relationship development via cold-calling, face-to-face interactions, phone outreach, professional/social networking, and written communication., • Motivated, ambitious, energetic, service mindset, strategic thinker., • Possess excellent verbal and written communication skills., • Flexible and adaptable, a team player, enjoys collaboration and sharing successes, and possesses great integrity., • High level of proficiency - Microsoft Office (Word, PowerPoint, Excel, Microsoft BI), • Must be able to travel within the territory (up to 70%) and to conferences as needed (10%)

Job DescriptionDescription: Position Summary The Regional General Manager is responsible for leading and overseeing the operations, financial performance, and strategic growth of multiple residential HVAC branches within a defined geographic region. This role ensures consistency in service delivery, drives revenue growth, enhances operational efficiency, and fosters a high-performance culture aligned with company goals. Essential Duties and Responsibilities Operational Leadership • Oversee day-to-day operations across multiple branch locations to ensure quality service, operational excellence, and profitability, • Implement and monitor KPIs to drive performance in areas including service delivery, installation, scheduling, and customer satisfaction, • Develop, manage, and track regional budgets and P&L performance, • Identify and implement strategies to improve gross margins, reduce overhead, and grow revenue, • Lead and mentor General Managers and support staff across locations, • Foster a strong culture of accountability, safety, and continuous improvement, • Ensure a high level of customer satisfaction through quality control and service delivery standards, • Maintain key relationships with equipment manufacturers and vendors across the regionRequirements: Strategic Growth & Expansion • Identify and support growth opportunities including market expansion, acquisitions, and new service offerings, • 10+ years of progressive leadership experience in residential HVAC or a similar field services industry, • Proven success managing multi-location operations and large teams, • Strong understanding of HVAC service, replacement, and installation business models, • Solid financial acumen with P&L ownership experience, • Strong leadership, interpersonal, and communication skills The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. • Office and field-based role; frequent regional travel., • May require evening/weekend availability depending on operational needs., • Sitting for prolonged periods of time., • Standing and walking for prolonged periods of time., • Manual Dexterity, • Visual Demands: Prolonged use of a computer screen and reviewing documents., • Lifting/carrying equipment using proper safety protocols, as necessary.

Job Description Assistant Program Manager - Residential Care We are searching for a highly committed, dependable and experienced direct support professional; a person who has a proven record in human services or a related field and ready for more responsibilities. If you have been a Leader, Role Model, or even an Assistant Manager in this field before, you clearly understand the job. Residential management in this field is very challenging but also extremely rewarding considering the special individuals and families we serve. If you are also someone who has a desire to join a mission based organization, and is friendly, compassionate, and genuinely cares for and appreciates people, then this might just be the right opportunity you. The residents of this program are truly a special group and wonderful to serve. The guardians are very supportive of GIL and our staff. The residents are typically active in community outings and recreational activities; therefore an enthusiastic, attentive Assistant Manager who is willing to explore opportunities for personal expression, new experiences, and routine family interaction for our residents is preferred. About the Company & Our Mission: GIL Foundation Inc. is a private nonprofit that provides services for individuals with intellectual and developmental disabilities, and autism in CT. Since 1985, GIL has served community residents as a top-tier care provider with a strong reputation for quality services through DDS. GIL is committed to higher standards of loving and compassionate care. Our vision is to see amazing people pursuing opportunities, while overcoming challenges, leading to transformed lives. The Program Manager will receive routine support from a dedicated Assistant Program Manager to assist with program assignments. On-call schedules are shared and rotated between several Managers and Supervisors to share the workload and reduce the necessary burden. You will be provided solid support from responsible Program Directors, highly qualified Nurses, and a super-supportive Administration. GIL may not be the largest private non-profit organization but we are certainly both strategic and considerate because we do appreciate the magnitude of the role, and value our staff. Therefore our leadership is sensitive to the ongoing needs of the position and dedicated to providing tools and coaching as needed. Benefits We Offer: • Meaningful, Life Changing Careers, • Competitive Pay, • Enhanced Compensation for Holidays, • Pleasant, Supportive Atmosphere in a Casual Work Environment, • Employee Paid Time Off, • Employee Medical Health Benefits – 100% Employer Paid for Worker, • Dependent Medical Health Benefits – 50% Employer Paid for Dependents, • Enhanced Compensation for FT Employees who waive Medical Benefits, • Salary Based Life Insurance, • Health Savings Account Plans – HSA, • Flexible Savings Account Plans - FSA, • Supplemental Benefit Plans, • 401(k) Employee Retirement Plans, • Employee Referral Incentive Plan, • Opportunities for Overtime The Essentials – What We Are Looking For: We want someone who will be a good fit for our company culture, who has served as a Direct Support Professional and able to handle more responsibilities, and for the right reasons - someone who can genuinely make a difference for our residents. • An Assistant Program Manager for GIL should be a person of integrity who is highly committed, very responsible, and is organized with a definite attention to detail – considering the daily program assignments and compliance to state licensing regulations at this facility. A Manager who is honest, faithful, and trustworthy; and demonstrates a dedicated work ethic will fit well in our company culture. This assistant manager must be someone comfortable working in a team environment with another Assistant Program Manager and the Program Manager., • This Assistant Program Manager should also be caring and compassionate with respect to our residents and a solid coach and mentor for the 12-15 staff members for which he or she will be responsible to supervise. A Manager who is kind, patient, and flexible with co-workers and team members; and also good at observing for other's needs, while listening to others, and making room for efficient and effective staff supervision and training of a diverse workforce. Someone who can support management in program needs including medical, financial, programmatic, recreational, and house/facility management., • This Assistant Program Manager will need to be flexible with your schedule and availability to work due to the nature of 24-hour care for individuals requiring high levels of support in a facility that you might potentially supervise. Someone who is coach-able, interested in personal development, eager to learn and willing to ask questions will fit well in our company culture. This is an hourly role and overtime is available. The APM will also be subject to on-call at the particular program worked, in a three person rotation. Schedule: Our shifts are set shifts, with stronger staffing patterns, and the scheduling is managed through advanced technology – an electronic scheduling system whereby all staff have access through their electronic dashboard or mobile device app. Open shifts and scheduling can be better supported and managed in real time as all staff get texts and emails through the system and can respond promptly to opening, swaps, time off, etc. for which Managers can coordinate more efficiently. Why Join Our Team: GIL Foundation has served the community for more than 35-years. We believe in the promise of better outcomes whereby our service makes a real difference in the lives of the people we support. At point of service our passion is fully expressed – the best workers shine in advancing our mission and casting a contagious vision. This is what it's really about! Our Values & Beliefs describe the kind of organization GIL is and also helps identify the kind of people who will better fit our culture. We understand the daily challenges faced by Human Service Professionals; therefore we continually strive to honor our workers' awesome dedication and genuine commitment to nonprofit service. Our cooperative passion is to strive for excellence, promote teamwork, and challenge superior performance throughout the organization. “There are three kinds of relationships one can have with work: you either have a Job, a Career, or a Calling.” — Chip Conley Check out our website to get a better feel for the GIL Foundation culture () while exploring Our Beliefs & Values. We are certain that you will feel supported and hope that we can have the opportunity to consider you for this rewarding position. The following certifications will need to be obtained and approved within company policy guidelines: State Medication Administration Certification First Aid for Accidents CPR – Cardio Pulmonary Resuscitation PMT – Physical Management Techniques *Previous Supervisory experience and experience in human services, especially with ID/DD individuals is preferred. Company DescriptionAbout the Company & Our Mission: GIL Foundation Inc. is a private nonprofit that provides services for individuals with intellectual and developmental disabilities, and autism in CT. Since 1985, GIL has served community residents as a top-tier care provider with a strong reputation for quality services through DDS. We will be providing solid support from responsible Program Managers and Directors, highly qualified Nurses, and a super-supportive Administration.About the Company & Our Mission:\r\n\r\nGIL Foundation Inc. is a private nonprofit that provides services for individuals with intellectual and developmental disabilities, and autism in CT. Since 1985, GIL has served community residents as a top-tier care provider with a strong reputation for quality services through DDS. We will be providing solid support from responsible Program Managers and Directors, highly qualified Nurses, and a super-supportive Administration.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company parties, • Competitive salary, • Opportunity for advancement, • Paid time off The Ed Merklen State Farm Agency located in Southington, CT is seeking an outgoing, career-oriented professional to join their team. As a State Farm team member for the Account Manager position, you will build and develop customer relationships within the community to promote State Farm products including auto, home and life insurance. Responsibilities • Establish customer relationships and follow up with customers, as needed., • Use a customer-focused, needs-based review process to educate customers about insurance options., • Maintain a strong work ethic with a total commitment to success each and every day.As an Agent Team Member, you will receive..., • Salary plus commission/bonus, • Paid time off (vacation and personal/sick days), • Valuable experience, • Growth potential/Opportunity for advancement within my agencyRequirements, • Sales experience (outside sales or inside sales representative, retail sales associate, or telemarketing) preferred, • People-oriented, • Self-motivated, • Ability to work in a team environment, • Property and Casualty license preferred (must be able to obtain), • Life and Health license (must be able to obtain)If you are motivated to succeed and can see yourself in this role, please complete our application. We will follow up with you on the next steps in the interview process. This position is with a State Farm independent contractor agent, not with State Farm Insurance Companies. Employees of State Farm agents must be able to successfully complete any applicable licensing requirements and training programs. State Farm agents are independent contractors who hire their own employees. State Farm agents employees are not employees of State Farm.