Trabajos Engineering en New York - Page 4

Job Description Geotechnical department is looking for a candidate to support our growing team in Rochester, NY. This employee may be an entry level up to an associate level. Salary is negotiable based on prior experience and may be a wider range than listed based on discussions with supervisor and division director. Duties: • Perform geotechnical field services, which may include subsurface exploration layouts, drilling and test pit inspections, geophysical surveys, and construction monitoring., • Perform visual classification and laboratory testing of soil samples collected during the subsurface investigation., • Prepare subsurface exploration logs for use in geotechnical evaluations and reports., • Perform geotechnical evaluations and prepare report drafts for senior review. Requirements • B.S degree in civil engineering or related field., • 0 - 3 years of progressive experience in the geotechnical field., • Prior experience in a geotechnical laboratory is preferred but not required., • Engineer in Training (EIT) is preferred but not required., • Driver's license required., • Position will require out of town field work based on workload (approximately 40%), • Position will require ability to lift 50 pounds., • Effective verbal and written communication skills., • Possess a high capacity for self-motivation., • Ability to apply engineering principles to a variety of geotechnical projects. Salary Range: $60,000 - $75,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description LaBella Associates is currently seeking an Electrical Engineer in our Rochester, NY office. Duties • Preparation of electrical design drawings, specifications, and reports, • Responsible for project construction (submittal review, construction observation, and punch lists), • Interact closely with mechanical, civil, structural engineers and project architects, • Prepare electrical design drawings using Revit and AutoCAD., • Perform lighting calculations and arc flash studies., • Perform field investigations to document existing conditions. Requirements • Building system design experience focused on power distribution, lighting, fire alarm, security systems & telecommunication, • Proficiency in Revit, AutoCAD, MS Excel and Word, • Familiarity with electrical modeling programs – Lighting software AGi32, Power software SKM, • Familiarity with Arc-Flash Evaluation, • Bachelor’s degree in electrical engineering, • Minimum 5 years engineering experience involving building systems projects, • Strong writing, organizational and communications skills, • Ability to work on several projects simultaneously, • On path towards New York PE license preferred, not required Salary Range: $75,000 - $105,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionAchieve more with Volt Volt is immediately hiring for a Manufacturing Engineer in Rochester, NY As a Manufacturing Engineer you will: The Manufacturing Engineer II operates with minimal supervision and is responsible for designing, implementing, and optimizing manufacturing processes within a single facility. This role supports the production of both new and existing products by improving efficiency, quality, cost, and safety. It may also involve planning assembly layouts, testing new systems, and managing capital projects, all while ensuring compliance with regulatory standards. • Plans and designs basic manufacturing processes, • Determines equipment and tooling needs, • Develops and implements efficiency, safety, and cost-focused projects, • May lead small teams, • Advises on design concepts and specifications, • Ensures processes meet regulatory standards, • Applies technical standards and principles, • Investigates and resolves quality issues, • Suggests corrective actions, • Performs other duties as assigned This is a full time, Direct Hire opportunity. The ideal candidate will have: • Bachelor’s Degree in Engineering or related field, • 2–5 years of relevant experience, • Proficient in applying engineering concepts to solution lines, • Strong analytical and problem-solving skills, • Experience with continuous improvement methods (e.g., pull systems, JIT, process mapping), • Working knowledge of:, • Data structures and database programming, • CAD/CAM and computer-aided manufacturing systems, • Standard business and data analysis software, • Engineering drawings and specifications, • Geometric dimensioning and tolerancing (GD&T), • Strong verbal and written communication skills, • Well-organized, detail-oriented, and able to multitask, • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Access, Outlook) Salary: $70,000-$80,000 *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The ideal candidate will be responsible for providing engineered drawings for HVAC control systems. You should be able to review specifications and contract drawings for assigned projects. Provide accurate drawings for HVAC control systems and schematics using AutoCAD. Have the ability to size control valves, dampers, air flow stations, and the like for HVAC systems. Experience designing systems with typical DDC control lines such as: Schneider Electric, Tridium, or similar. Be able to write and understand the sequence of operations for HVAC control systems, along with assembling submittals and O&Ms for projects. Additionally, the ideal candidate will possess the ability and willingness to mentor and guide junior design engineers, supporting their growth and development within the team. What are we looking for • Associate degree in Mechanical Engineering/Mechanical Engineering Technology/Electrical Engineering/Computer Engineering or other STEM field with 3-5 years' experience in relevant field., • 4+ years' experience in controls design engineering OR 8+ years as a controls technician., • Sound knowledge of electrical circuits, HVAC, sensors and signal types, and controls required., • Familiarity with common control sequences including ASHRAE Guideline 36P., • Demonstrated capability drafting control drawings in Visio, AutoCAD, or equivalent., • Advanced computer skills and proficiency in MS Office Suite required., • Bachelors degree in Mechanical Engineering/Mechanical Engineering Technology/Electrical Engineering/Computer Engineering or other STEM field with 2-4 years' experience in relevant field., • Experience designing control systems using Schneider Electric EcoStruxure and SpaceLogic. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionDescription: Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We are seeking a skilled Quality Engineer to drive quality excellence through process improvement, quality system management, and engineering solutions. This role combines technical expertise with leadership to ensure product quality, maintain compliance standards, and foster a culture of continuous improvement across the organization. This hands-on role requires significant shop floor presence, working directly with inspectors and operators to ensure quality standards are maintained in real-time. The ideal candidate must be comfortable balancing theoretical quality principles with practical, day-to-day production support. Key Responsibilities: • Maintain an active floor presence throughout production areas and work directly with quality personnel to resolve quality issues in real-time., • Guide operators through complex inspection requirements and troubleshoot quality issues on the spot., • Collaborate with customers to complete source inspections., • Support production with immediate quality decisions., • Ensure proper use of inspection equipment and validate inspection methods in real production conditions., • Assist quality leadership personnel with auditing company policies, procedures, and systems that affect product quality to assure compliance with the company’s quality system and good manufacturing processes., • Establish and implement product and process quality standards while remaining in compliance with ISO9001, AS9100 and NADCAP requirements., • Lead INCR/NCR investigations., • Complete analysis on incoming products and approve all product receipts., • Inspect and test materials, equipment, processes, and products to ensure quality specifications are met., • Develop user-friendly inspection documentation for operators, such as visual aids and inspection guidelines., • Develop First Article Inspection (FAI) documentation and procedures., • Maintain inspection documentation system and update inspection procedures., • Specify and order appropriate inspection gauges and develop gauge control and calibration requirements., • Identify customer flow down requirements., • Collaborate with operations managers on process control development., • Develop, implement, and validate corrective actions for quality issues to prevent issue recurrence. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in engineering, Manufacturing, or related technical field with 3+ years quality engineering experience OR associate’s degree in related technical field with 5+ years of progressive quality experience in manufacturing and comprehensive understanding of quality principles., • Demonstrated proficiency in GD&T and blueprint reading., • Experience with measurement equipment and gauging systems., • Practical knowledge of SPC and quality tools., • Understanding of ISO 9001, AS9001 and NADCAP quality systems., • Background in manufacturing environment – precision machining or aerospace highly preferred., • High proficiency in computer technology and systems operations., • Strong analytical and problem-solving skills couples with an attention to detail. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job Description We are looking for an experienced Engineering Project Manager III to lead critical initiatives with our team. This long-term contract position is based in Skaneateles, New York, and requires a hybrid work schedule, with onsite presence three times per week. The role involves managing cross-functional projects with minimal supervision, ensuring compliance with medical device industry standards. Responsibilities: • Define project scope and identify key team members and milestones necessary for successful execution., • Collaborate with internal departments and external stakeholders, including R& D, technical communication teams, and suppliers, to drive project progress., • Provide regular updates on project status and ensure timely communication of any changes., • Manage projects from initiation to completion, ensuring deliverables align with the intended objectives., • Maintain detailed documentation of project decisions, milestones, and evidence to ensure auditability and compliance with industry regulations., • Ensure project outputs meet quality standards and fulfill project intentions upon closure., • Negotiate and coordinate effectively across functions to address challenges and maintain project momentum., • Utilize Microsoft Office tools to track progress and manage documentation effectively., • Bachelor's degree in engineering, manufacturing, operations, or a related field is required., • Minimum of 8-10 years of experience in manufacturing, operations, or project management., • At least 2-5 years of experience managing projects within a matrix organization., • Proven ability to work independently and drive projects to completion., • Strong attention to detail and communication skills, with the ability to negotiate cross-functionally., • Familiarity with regulated industries and experience in medical device environments preferred., • Proficiency in Microsoft Office Suite and SAP systems., • Experience with labeling updates and Trackwise systems is a plus.

Job DescriptionPower-Flo Technologies is a leading distributor of electrical equipment offering one of the most comprehensive product and service portfolios in the state, including automation, drives, controls, power distribution, and motor repair. We are looking for an experienced Applications Engineer to join our Upstate New York team. You will play a critical role in delivering complete, real-world systems and solutions to our customers. Applications Engineer Primary Functions • Pre and post sales support for automation, PLCs, drives, motion control, and machine vision products and services., • Assist customers with proof of concept for automation, PLCs, drives, motion control, and machine vision applications., • Assist sales and account managers as necessary to close business., • Phone and On-Site customer support., • Preparation and execution of product training classes including development of course and materials., • Attend vendor training classes as offered and/or required., • Maintenance, appearance and upgrades to demos., • Weekly engineering activity report and schedule., • Target and plan for minimum $20K annual engineering and training billings., • Minimum 2 customer calls per week, whether technical or sales., • Monitor and complete assigned Engineering Tasks, • BS Engineering or equivalent technical degree, • Knowledge of automation, PLCs, drives, motion control, and machine vision applications, • Advanced computer skills: Windows, VM Ware, Networking, • Knowledge of Siemens programming and HMI software a plus, • Ability to operate a motor vehicle We are an equal opportunity employer offering competitive compensation and benefits package including health, disability, life insurance, 401(k) and long-term disability plans. Salary Range $75,000 - $125,000 annually About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description We are currently hiring an Electrical Engineer in our Building Engineering Division – Energy Infrastructure team in our Buffalo, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses and design. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Electrical Engineer will work with our team in a lead role on a variety of decarbonization/electrification/renewable energy projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Design building electrical systems, • Design photovoltaic, battery storage systems, and grid interconnection, • Field investigations to document existing conditions, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 2-4 years of relevant experience, • Bachelor’s degree in Electrical Engineering is preferred, • Well-rounded experience in building electrical system and/or distributed energy system design, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $70,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • An Office Engineer assists the EIC/Resident Engineer on daily management of construction inspection projects, providing technical and administrative information to others working on the project to ensure that work complies with all engineering standards, codes, and specifications. Responsibilities include, review of daily inspection reports and payment quantities in accordance with NYSDOT/MURK requirements, prepare change orders for overruns, changed conditions, and additional work as well as other project administration roles., • The Office Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 10 years of related experience, or similar position with experience in the construction field and transportation projects., • NICET III or equivalent experience, or EIT designation, • Bachelor's Degree desired. Associate's Degree acceptable with relevant experience, • Excellent communication skills, • Ability to supervise or coordinate the work of others, • Knowledge of NYSDOT's Equitable Business Opportunities (EBO) software Estimated Compensation Range: $83,200 - 101,920/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description About Us Larson Design Group (LDG) is an award-winning, employee-owned Architecture, Engineering, and Consulting Firm. Guided by our core values, we’re expanding our team, opening new offices, and adding new offerings to provide responsive, innovative solutions to clients nationwide. Being 100% employee-owned directly impacts our culture: it drives our decision-making, motivates our teams, increases our productivity, improves retention, and contributes to the future success of our company. Our culture is one where we work hard for our clients and for each other – and we have fun collaborating, sharing experience and expertise, and learning along the way. We’re passionate about delivering exceptional quality, elevating client relationships, enriching the careers and lives of our employee owners, and enhancing the communities where we live and serve. At LDG, we strive to create an organization where people want to work. We offer a flexible work environment, paid training for required licensures, competitive benefits, bonus plans, and a company-funded Employee Stock Ownership Plan (ESOP) while supporting your professional and personal growth. Your Opportunity + Impact The Engineer functions as a technical leader and is required to have a Professional Engineer (PE) license and commensurate work experience. This position will coordinate overall design activities, project submission schedules, and will be responsible for additional Quality Assurance and Quality Control duties to help ensure the final products meet the technical requirements and goals of the client. Key Responsibilities • Prepares and reviews design computations, plan designs, and drawings., • Reviews submittals and coordinates project submissions., • Prepares and reviews specifications, draft letters, and written technical reports., • Completes inspections and field work assignments as needed., • Researches, reviews, interprets, and understands written regulations, code compliance, and permit requirements and applies them to design projects., • Maintains appropriate documentation of work and project records., • Possesses knowledge of Codes and Standards applicable to project designs., • Develops technically accurate, clean, and deliverable drawings., • Promotes, utilizes, and supports quality assurance and quality control processes to improve the quality of deliverables and reduce design errors and omissions., • Bachelor’s or Master’s Degree in relevant Engineering field from ABET-accredited school, or related field of study., • Minimum of (5) years job-related experience. Transportation-related bridge design experience preferred., • Licensure/Certification: Professional Engineer (PE) required., • Must have thorough knowledge of the design and development process of transportation bridge projects and knowledge of AASHTO and Design Manuals, Standards, Specifications, Engineering Software, and Microstation., • Proficiency with Microstation, Open Roads, InRoads (Surfaces and Templates), and other related software programs preferred., • Must have a strong desire to expand knowledge base and undertake new responsibilities., • Must be proficient in Microsoft Office Suite (Excel, Word, PowerPoint, Outlook), • Possess strong oral & written communication skills, and have strong organizational & time management skills Larson Design Group, Inc. is an Affirmative Action and Equal Opportunity Employer (EEO) that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization. Powered by JazzHR fxjn62mOOX

Job DescriptionSalary: $18-$22/ Per Hour We're looking for talented Interns to join our team for the Fall 2026 Semester! As an Engineering Intern, you will be working with our global R&D team on our Timing and Synchronization Products. We're looking for Interns enrolled in a four-year or post-graduate degree program in the following or related fields: Electrical Engineering Computer Engineering Computer Science Mechanical Engineering Signal Processing Radio Communications What youll be doing: • Working closely with our Engineering Team, you will be designing, developing, and enhancing product features on the latest GPS-based and alternative PNT time synchronization equipment and software., • Coding software in our embedded Linux stack using languages such as C, PHP, python, HDL, golang (per your experience), • Testing new products, new features and software releases to ensure our products meet the highest standards and specifications., • Devising test procedures, experiments, test fixtures and software; performing those tests, analyzing the results and generating comprehensive test reports and recommendations., • Analyzing and debugging problem reports and designing fixes, • Working in a global multi-discipline, multi-cultural environment with cross-functional teams toward a common design goal. Safran Trusted 4D, Inc is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veterans status or any protected category. We encourage veterans and people with disabilities to apply.

Job DescriptionSalary: $110K to $130K We are seeking an experienced and strategic Applications Engineering Manager to lead a high-performing team of solution architects and engineers focused on delivering innovative, reliable, and scalable solutions. This leadership role requires strong technical expertise, people management skills, and a customer-focused mindset to ensure seamless integration of our technologies into client systems and workflows. The Day to Day: • Partner with product management, sales, support, and core engineering to define application requirements and customer needs., • Lead the proposal preparation and contribute to the financial estimate together with Sales and R&D, • Serve as a technical liaison with customers and internal stakeholders, translating business requirements into functional solutions., • Provide insights and feedback to influence product roadmap and feature development., • Work directly with clients to understand their environment and recommend integration strategies., • Support pre-sales activities, proof-of-concepts (POCs), and post-deployment technical troubleshooting as needed., • Advocate for the voice of the customer within engineering and product roadmap discussions., • Seen as a respected technical expert for assigned Business line and is expected to work closely with current and prospective customers., • Lead, mentor, and develop a team of applications engineers, fostering growth in both technical and soft skills., • Establish clear goals, conduct regular performance reviews, and promote a culture of excellence and accountability., • Manage application engineering projects from inception to completion, ensuring timely delivery and technical quality., • Oversee solution design, prototyping, validation, and customer deployment in coordination with product and engineering teams., • Ensure best practices in pre-sales support, RFQ/RFP support, product demonstrations, product training (internal and external), 2nd tier product technical support, product requirements development and reviews, trade show support, and conference/webinar presentations. What you bring to Safran: • Bachelors degree in computer science, Electrical Engineering, or related field; advanced degree preferred., • 7+ years of experience in applications engineering, technical solutions, or software engineering., • 3+ years in a people management or technical leadership role., • Experience working with international teams and customers exhibiting sensitivity to regional requirements and customs., • Knowledge of system architecture, integration methodologies, and customer onboarding strategies., • Proficient in-service offerings, selling and pricing services based on custom needs, • Experience in industries such as aerospace, position navigation and timing, networking and/or communications., • Familiarity with tools and technologies such as Python, C/C++, Linux, cloud platforms (AWS/Azure/GCP), and DevOps practices., • Hand-on experience with ERP systems and CRM tools such as Oracle, SAP, MS Dynamics 365, SFDC, Zendesk and Zoho, • Proven experience working with complex systems in embedded, hardware/software, or enterprise environments.

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities • Ability to motivate and mentor junior staff., • Project management, communication and multi-tasking skills., • Ability to work with internal and external staff on an individual and team basis., • Ability to challenge one’s self and broaden knowledge base., • Bachelor's of Science or Technology in Electrical Engineering, • 5-10 years of related experience, • PE preferred, FE required, • Experience with the National Electric Code., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash., • Experience with the layout and design of low voltage building distribution systems. *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescription: About WeTheHobby WeTheHobby is a fast-growing sports entertainment company bringing fans together through live-streamed breaks, eCommerce, and real-time community experiences. Headquartered in Rochester, NY, we’re building platforms that connect collectors and fans worldwide. We value creativity, innovation, and collaboration—and we’re looking for builders who want to make an impact in one of the fastest-growing corners of sports entertainment. The Role We’re seeking a Senior Backend Engineer to design, build, and scale the systems that power our customer experience. In this role, you’ll focus primarily on coding and delivering high-quality features, while also mentoring teammates and contributing to architectural discussions that shape our platforms. What You’ll Do • Build & Scale Systems – Design, develop, and maintain backend services and APIs that support eCommerce, payments, and live streaming, • Hands-On Development – Spend the majority of your time coding, writing tests, and shipping features, • Mentor Teammates – Guide junior engineers on coding best practices, clean design, and maintainability, • Collaborate – Work with product, front-end engineers, and designers to deliver high-quality features, • Contribute to Architecture – Participate in architectural discussions and propose technical solutions, • Ensure Quality & Security – Champion testable, secure, and scalable code through best practices and code reviews, • Stay Current – Explore new tools and technologies to help improve performance, scalability, and developer productivity Requirements: What We’re Looking For Must-Haves • 5+ years of backend engineering experience, preferably with .NET, • Experience designing and implementing APIs and scalable systems, • Strong database skills (SQL and/or NoSQL), • Hands-on experience with AWS (or another major cloud platform), • Excellent problem-solving and collaboration skills Nice-to-Haves • Experience with GraphQL, SignalR, or event-driven systems, • Familiarity with front-end frameworks (React.js or similar) for better collaboration, • Background in eCommerce, payments, or streaming technologies, • Impact: Help design and build the backbone of our platform in a high-growth environment, • Ownership: Spend most of your time coding while also mentoring teammates and contributing to architecture, • Growth: Opportunity to work with cutting-edge technologies and expand your technical expertise, • Salary: $130,000 – $150,000 depending on experience and skills, • Benefits package including health, dental, vision, PTO, and more

Job Description Research Engineer Founded in 2017 and headquartered in Rochester, NY, REMADE℠ is a 170+ member public-private partnership funded in part by the U.S. Department of Energy’s Office of Advanced Materials and Manufacturing Technologies (AMMTO) with an initial investment of $140 million. REMADE is the only national institute focused entirely on developing innovative technologies to accelerate the U.S.’s transition to a Circular Economy. In partnership with industry, academia, trade organizations, and national laboratories, REMADE enables early-stage applied research and development that will create jobs, dramatically reduce embodied energy and greenhouse gas emissions, and increase the supply and use of recycled materials. For more information about REMADE (Reducing EMbodied Energy And Decreasing Emissions), visit . Position Summary The primary responsibility of this position is to support the development and administration of state grant programs that support the creation of technologies to expand the waste tire market and fund demonstration projects aimed at increasing the use of waste tires. This role is vital for driving innovation and fostering sustainable solutions for waste tire management throughout New York State and beyond. The successful candidate will play a major role in managing these grant programs, collaborate with stakeholders, and guide the development of both technology initiatives and demonstration projects focused on expanding the use of waste tires. In addition to managing the tire recycling program, the research engineer will support the broader mission of the Institute by fostering relationships with stakeholders in industry, academia, and government, conducting research on market trends, opportunities, and barriers to new technologies, assisting in the preparation of proposals for securing government or private funding, and contributing to other Institute initiatives as needed. This job is based in the Rochester, NY office. Salary Range: $75k to $90k Primary Responsibilities • Support the development and oversight of a state-funded grant program for waste tire management and the expansion of recycling markets. This includes designing and administering the grant application process, establishing criteria and evaluating proposals, and overseeing the selection and contracting of recipients., • Establish clear objectives, timelines, and milestones for grant recipients. Monitor progress and ensure that projects remain within scope, budget, and timeframe. Conduct site visits and inspections as necessary to evaluate project outcomes and compliance., • Provide technical expertise and guidance to applicants and stakeholders, ensuring that the proposed technologies or solutions meet industry needs and demonstrate feasibility, scalability, and sustainability., • Submit all necessary reporting to state and regulatory bodies. Ensure all activities comply with state laws, regulations, and grant guidelines., • Build strong relationships and promote engagement with stakeholders from industry, academia, and government agencies., • Promote knowledge sharing and best practices in the rubber and tire recycling industry., • Conduct online research to identify market trends, evaluate market opportunities and identify technical, economic, environmental and institutional barriers to the implementation and deployment of new technologies relevant to building a circular economy, • Assist in the preparation of proposals to obtain government and/or private funding of new projects or initiatives, • Experience in one of the following areas:, • Markets for recycled products, preferably rubber, • Technologies for tire recycling, • Rubber compound formulations and manufacturing processes, • Regulations governing waste tire disposal, • Familiarity with New York State businesses involved in tire disposal, recycling, and related activities, • Experience working with federal and/or state agencies, with a preference for candidates who have managed government-funded grant programs, • Project management experience with technical projects in a research environment preferred, • Capable of conducting technology assessments for new and emerging technologies using tools such as technoeconomic analysis, net energy analysis, Lifecyle analysis, and market opportunity analysis., • Benchmarking of new or emerging technology relative to the state-of-the-art, • Ability to systematically analyze complex, technology centric problems, identify technical, economic, market, and institutional barriers to the adoption of emerging technologies, and develop and implement effective solutions., • Strong verbal and written communication skills, and ability to convey complex information in a way that others can readily understand, • Strong attention to detail, ability to multi-task and work effectively in a fast-paced environment, • Grant/proposal writing experience a plus, • Bachelor’s Degree required in engineering or other technical related fieldThe REMADE Institute does not discriminate in the screening or submission of candidates on the basis of race, color, religion, sex, age, national origin, marital status, disability, or other protected status. All applicants must be U.S. citizens or lawful permanent residents Powered by JazzHR pIoDypAmPf

Job Description This position is responsible for overseeing and performing electrical engineering and controls related activities associated with the Company's’s projects and daily tasks. Responsibilities: • Cost estimation, equipment procurement and installation, system startup, data management and reporting., • Serve as a technical expert on all matters concerning electrical/electronic controls and machine sub-systems. Applies in-depth troubleshooting and diagnostic techniques on a variety of systems including digital, analog, computer & logic controls, servo and sensing systems and the similar., • Support production operations through timely scheduling and supervision of required preventative and corrective action maintenance activities involving electrical & electronic systems., • Support maintenance technicians with a variety of electromechanical engineering needs with troubleshooting, programming/editing, training and special projects with electrical/electronic equipment and machinery., • Required to train existing and new maintenance staff to various levels of basic and advanced electronic/electromechanical troubleshooting., • Electrical design tasks may include heater calculations, electrical load calculations, short circuit and overcurrent protection calculations, transformer and wire sizing, panel layout, component selection, etc., • Coordinate with local IT on network related projects and troubleshooting, assist maintenance electricians with industrial networking., • Provides input & guidance for development of new processes, equipment, technology & procedures in reliability centered maintenance. Monitor, analyze and evaluate test data in conjunction with new process trials., • Support the overall needs of central systems such as compressed air, coolant, HVAC, etc. Requirements: • BSEE/BSEET or equivalent;, • Preferred, but not required: experience in a manufacturing environment, troubleshooting programmable logic controllers, • Experience with troubleshooting of electromechanical devices such as servo motors, stepping motors, encoders, resolvers, variable speed drives and general CNC control systems such as Siemens 840D and Fanuc 0i-30i will be an area of high priority., • Must have the ability to read and understand electrical diagrams.

Job DescriptionJob Title: Enterprise Architect (Financial Crime & Fraud Prevention)Location: Buffalo, NYHire Type: Contingent Hourly: $48.37 - $80.62/hourWork Model: Hybrid Contact Email: No C2C, C2H or Visa Sponsorship Available. Nature & Scope:Positional OverviewWe are seeking a visionary Enterprise Architect to lead the design, implementation, and integration of Cloud infrastructure within our financial organization. This role will play a pivotal role in shaping the organization’s technology strategy, landscape, and roadmap. This position requires a deep understanding of banking compliance and U.S. Federal regulations, as well as expertise in designing and implementing solutions that align with operational and security standards.Role & Responsibility:Tasks That Will Lead To Your Success • Strategic Planning: Define and evolve enterprise architecture strategies and roadmaps that align business priorities, regulatory requirements, and long-term technology vision., • High-Level Design: Develop high-level architectural models and frameworks that support secure, scalable, and resilient solutions across complex financial ecosystems., • Detailed Solutions Architecture: Translate strategic objectives into actionable solution architectures that provide clear direction to delivery and engineering teams., • Regulatory & Risk Alignment: Ensure architectural solutions comply with financial industry regulations, internal risk frameworks, and data privacy standards, supporting auditability and operational integrity., • Cross-Functional Collaboration: Partner with business leaders, product owners, and technology teams to ensure architectural alignment across client services, digital platforms, and core banking systems., • Implementation Leadership: Provide architectural oversight and governance throughout the solution delivery lifecycle, ensuring adherence to enterprise standards and successful on-time execution of high-impact initiatives., • Trusted Advisor: Build strong relationships with management, providing expert advice and insights to support decision-making., • Communication: Communicate complex architectural concepts clearly and persuasively to both technical and non-technical audiences, fostering alignment and informed decision-making., • Vendor & Partner Engagement: Collaborate with external technology providers and service partners to ensure solutions meet enterprise standards for performance, cost-effectiveness, and agility in a highly regulated environment. Skills & Experience:Qualifications That Will Help You Thrive, • Strategic Thinking: Ability to align technology architecture with business strategy, identifying opportunities to drive value, efficiency, and innovation across complex financial services ecosystems., • Business Acumen: Deep understanding of financial services, focused on Financial Crime & Fraud Prevention area (CDD, Case management, Screening, Payments, Monitoring, Fraud Prevention and Detection & Remediation), with the ability to translate those needs into effective architectural solutions., • Enterprise Architecture Expertise: Proficiency in developing and applying enterprise architecture frameworks (e.g., TOGAF, Zachman) to guide technology planning, governance, and execution., • Solution Design: Skilled in designing end-to-end solutions that are scalable, secure, and aligned with enterprise standards, while addressing both current and future-state business capabilities., • Technology Integration: Experience integrating diverse systems, platforms, and data sources to create cohesive, interoperable solutions that support seamless client experiences and operational efficiency., • Risk and Compliance Awareness: Strong grasp of regulatory and risk considerations in financial services, with the ability to architect solutions that meet compliance, audit, and data governance requirements., • Stakeholder Engagement: Proven ability to collaborate with senior business and technology leaders, facilitating alignment, managing expectations, and influencing strategic decisions., • Communication and Visualization: Excellent communication skills, with the ability to convey complex architectural concepts to both technical and non-technical audiences through clear documentation, presentations, and visual models., • Change Leadership: Ability to lead through ambiguity, drive consensus, and support organizational change as part of large-scale transformation initiatives., • Critical Thinking Skills: A creative and analytical approach to diagnosing and resolving technical challenges., • Continuous Learning: A passion for staying updated on financial services related technologies and their rapidly evolving tools, features, and best practices.EDUCATION AND EXPERIENCE REQUIRED:, • Education: Bachelors in computer science, IT, engineering, or related field, • 7+ years in cloud architecture, with 3+ years focused on Azure hybrid environments., • Knowledge of institutional banking products and services including capital markets, investment management, structured finance, and M&A., • Experience in driving and delivering innovation within the realm of financial services., • Working knowledge of architecture diagramming practices, architectural frameworks, and/or enterprise architecture tools, • Work experience in software engineering, software delivery and/or solution architecture including developing and integrating applications using relevant software architecture principles and patterns

Job Description We are seeking an experienced test engineer or electrician to join the QE MV Services team. The successful candidate will be responsible for commissioning, testing, and troubleshooting of medium voltage reclosers and protection and control systems, including SEL relays and other communication devices. They will also be responsible for acceptance and maintenance testing of MV cable, overhead equipment, pad-mounted transformers, and MV/LV switchgear. This role includes significant travel across the northeast with occasional national travel. Essential Duties · Perform acceptance testing and commissioning of reclosers, and protection and control systems in accordance with NETA/NICET standards · Perform functional testing, including protection and control schemes, on medium voltage systems including interconnection equipment specifically for PV/BESS systems · Perform acceptance and maintenance testing of variety of equipment from low voltage switchboard to point of interconnection. · Ensure that all equipment is installed and commissioned in accordance with manufacturer's specifications and industry standards · Perform pre-testing and witness testing of PV/BESS systems with AHJ · Troubleshoot and repair issues arising during commissioning · Prepare and review commissioning documentation, including test procedures and as-built drawings · Provide technical support to other field personnel during installation and commissioning · Communicate effectively with project managers, clients, site owners and other stakeholders · Stay current on industry developments and new technologies in acceptance and maintenance testing. Education & Certification Required: · Journeyman license or Associates/Bachelor's degree in Electrical Power Engineering or equivalent electrical experience in a related field. Experience Required: · Medium voltage experience should be related to protection and control schemes with level of expertise in SEL relays · Experience interpreting wiring diagrams to prepare relay logic and protection schemes. · Experience performing testing of transformers, reclosers, primary meters, and SEL relays · Strong problem-solving and analytical skills · Excellent verbal and written communication skills · Must be able to work independently and in a team environment · Must be able to work in a fast-paced, deadline-driven environment Specialized or Technical Knowledge Licenses, Certifications Preferred: · NICET Electrical Power Testing certifications · Thermography certifications (Level 1) · IT/networking skills: familiarity with RS485, Modbus, tcp/ip, etc. · OSHA 30 Certification · Completion of NFPA 70E courses · CPR/First Aid Functional Knowledge: · Knowledge of National Electrical Code and standard design/construction practices · Clear understanding of OSHA safe workplace practices and procedures · Ability to read and understand electrical single-line and three-line diagrams as well as other construction/DAS/design drawings or permitting documentation Company/Industry Related Knowledge: · Electric and related utilities and utility maintenance · Solar energy/BESS installation, maintenance, and optimization Physical Requirements: · Ability to lift up to 50 pounds regularly · Ability to move safely over uneven terrain · Ability to sit or drive for prolonged periods · Ability to safely climb ladders while carrying 50 pounds · Ability to work in extreme weather QE Solar offers incredible benefits! We enjoy: · 100% paid employee premium on health benefits; additional dependents at low costs and great plans for Health, Dental, Vision, FSA or HSA · Wellbeing and Employee Assistance · Perks at Work Marketplace for discounts on gym memberships, classes, tech, vacations, tickets, and more · Family Building and Adoption Assistance Programs · Learning & Development Opportunities · Discounted Life & Disability Insurance Workplace Type: On-site Salary Range: $45.00-$50.00 Per Hour Employment Type: Full-time Location: Syracuse, NY, USA Statement to all Third-Party Agencies and Similar Organizations: QE Solar accepts resumes only from contracted recruiting agencies with formal service agreements. Please do not send unsolicited resumes or outreach emails to our QE Solar employees, hiring managers, or team members without expressed consent or contract for services. QE Solar is not responsible for any fees or charges associated with unsolicited resumes or services.

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as a Precast Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum transportation experience including Precast concrete design engineering, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO and IBC codes, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Associate Automation Engineer is a key member of the Digital Plant team that will support manufacturing Process Control Systems and Building Automation Systems at the Syracuse, NY manufacturing facility. The primary role of the Associate Engineer will be to design, implement and maintain systems that are controlled by Programmable Logic Controllers (PLCs) that support manufacturing and the site buildings. This role will require computer system validation work associated with commissioning and qualification of systems end to end from specification documents through IQ, OQ PQ. The role will work directly with manufacturing process experts and facility engineers to determine end user requirements, develop robust strategies and solutions, draft specification documents, perform testing, commissioning and qualification activities and work safely and efficiently in a high compliance environment. Training will be provided as necessary to enable skills in specific applications used to support this role. Duties & Responsibilities • Primary function will be to support the design, build, test, and maintenance of the various Allen-Bradley PLC's and Rockwell applications associated with process control and building automation systems for the site., • Support the design and build of vendor Rockwell PLC/ BAS roadmaps to align with site strategy., • Works with various PLC/BAS Vendors/ Integration specialists to ensure a safe and successful implementation effort is achieved., • Investigate the root cause of Digital Plant PLC/BAS problems and propose solution to prevent recurrence., • Draft and maintain living and project documentation for managed systems including design specifications, qualification documents and knowledge base articles., • Conduct all job activities in accordance with cGMP and EHS requirements., • Provide training of automated solutions with Automation and Instrumentation staff to ensure understanding how the PLC/BAS functions to assist with troubleshooting during off hours., • Research and propose new PLC/BAS technologies to ensure cost reduction and increased reliability., • Advanced knowledge of engineering or sciences generally attained through studies resulting in a B.S. in, engineering, science, biochemistry or related discipline or its equivalent is highly desired with 3+ years experience with PLC/BAS design/ troubleshooting/ implementation OR 7+ years experience with PLC/BAS design/ troubleshooting/ implementation, • Knowledge of PLC/BAS engineering relating to Rockwell Allen Bradley products., • Knowledge of products and technologies provided by major automation vendors, including but not limited to: Rockwell Allen Bradley, • Experience in system and hardware refreshes from legacy to current technologies for PLC/BAS Systems, • Ability to develop and execute innovative PLC/BAS solutions for continuous improvement., • Quote/ Proposal review experience to ensure adequate design meets site budget commitments and project deliverables, • Experience working with PID drawings, electrical layout and wiring diagrams, Industry Design Standards and equipment loop drawings., • Technical problem solving and analysis skills as well as good communications skills (verbal and written)., • Ability to effectively lead or participate in multi-disciplined team environment to achieve goals., • Knowledge and understanding of applicable regulatory requirements. This position is an office-based position which requires appropriate levels of personal protective equipment (PPE) when field work is required. Frequent repeated motions such as keyboarding are required. Work Environment This position is based indoors, and you will primarily be working with others, but also independently and alone at times. This position is a team & project-based position that will require occasional shift work, weekends, and holidays. This position offers a hybrid work schedule, with the flexibility to work from home up to 50% of the time. Travel The position may require up to 5% of travel. Target Bonus 8% Work Location: East Syracuse, NY New York Pay Range$60,000—$88,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description Overview Are you ready to join a growing team? CTG is seeking to fill a Senior Technical Engineer opening for our client. Location: Buffalo, NY Duration: 3 months with high potential for extension Overview: Provides high-level technical solutions, designs, documentation, and guidance for the development and deployment of new or existing systems. Primary Responsibilities: * Lead design, development, and implementation of technical solutions. * Perform infrastructure architecture, system analysis, and testing. * Collaborate with business partners to gather requirements and estimate project efforts. * Coordinate vendor interactions and manage vendor resources. * Mentor less experienced staff and review their work. * Maintain expert-level knowledge of applications, environments, and vendor products. * Assist in budgeting and ensure compliance with risk, regulatory, and internal controls. * Complete other related duties as assigned. Scope of Responsibilities: * Provide technical guidance and support organizational standards, best practices, and compliance requirements. * Represent technical expertise in internal and client/vendor interactions. Supervisory/Managerial Responsibilities: * None Education and Experience Required: * 12+ years combined education and/or experience in systems design, management, or architecture. * Strong understanding of system development, infrastructure lifecycle, IT Service Management, and vendor best practices. * Bachelor’s degree in Computer Science or Computer Engineering. * 12+ years advanced experience in infrastructure design, system development, or complex applications. * Advanced skills in analysis, troubleshooting, problem solving, and technical execution. * Knowledge of server/client and virtual technologies. * Experience with project estimation, planning, and budgets. * Strong communication, facilitation, and influencing skills. * Ability to work independently and collaboratively in a fast-paced environment. • Calypso Trading Platform/ Fin Tech (Must Have), • Jira CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Krista Eckard at . Kindly forward this to any other interested parties. Thank you! The expected base salary for this position ranges from $74.35 to $123.90. Salary offers are based on relevant skills, training, experience, education, market factors, and—where applicable—licensure or certifications. In addition to salary, a competitive benefits package is offered.

Job DescriptionJob ProfileJob Title: Technical Engineer IV (Splunk)Location: Buffalo, NYHire Type: Contingent Pay Range: $53.20 – $88.65/hourWork Model: HybridRecruiter Contact: Brian Fesmire () No C2C,C2H, 1099 or Visa Sponsorship Available Nature & Scope:Positional OverviewAre you a seasoned Splunk Technical Engineer looking for an exciting new challenge? Join our client’s dynamic team where innovation and excellence are at the core of everything we do. They offer a collaborative and stimulating environment where your expertise will drive cutting-edge projects and shape the future of technology. If you're passionate about pushing the boundaries of technology and want to make a significant impact, we want to hear from you. Apply now! Role & Responsibility:Tasks That Will Lead to Your Success • Lead the design and architecture of the bank's SIEM infrastructure, ensuring its effectiveness, scalability, and alignment with industry standards and regulatory requirements, • Implement, configure, and optimize SIEM solutions to collect, correlate, and analyze security event data from various sources, such as network devices, servers, applications, and endpoints, • Develop and maintain SIEM use cases, correlation rules, alerts, and reports to identify and prioritize security incidents and potential threats, • Collaborate with other Cybersecurity and Security Engineering teams to investigate and resolve complex security incidents, conduct root cause analysis and recommending remediation actions, • Stay up to date with the latest security threats, vulnerabilities, and industry trends, and proactively assess their potential impact on the bank's SIEM infrastructure, • Lead SIEM-related projects, including system upgrades, enhancements, and integration with other security tools and technologies, • Provide guidance and mentorship to junior SIEM engineers, promoting knowledge sharing and skill development within the team, • Collaborate with internal stakeholders, such as IT operations, compliance, and risk management, to ensure the Bank's security posture is in line with industry standards and regulatory requirements, • Participate in incident response exercises, tabletop simulations, and other security-related drills to enhance the bank's incident response capabilities, • Responsibilities may include infrastructure architecture and design, research and development of new or expanded systems, creation of technology standards and policies, thorough analysis of user requirements and operational constraints, unit test and system integration, and user acceptance testing, • Regularly and independently interact with business partners of varying associate and management levels to ensure clarity of the problem/opportunity and elicit business requirementsSkills & Experience:Qualifications That Will Help You Thrive, • Minimum Bachelor’s degree in Computer Science or Computer Engineering., • Minimum 8 years advanced experience in a technical engineering position involving infrastructure design technologies, data management and interchange, system design and/or development for complex applications., • 8+ years of experience engineering, architecting and implementing SIEM technologies with Splunk (architecting the environment, parsing data logs and onboarding applications), • Splunk Enterprise Certified Architect or Splunk Core Certified Consultant required, • Advanced technical, analytical, troubleshooting and problem-solving skills., • Demonstrated ability to develop alternative solutions to complex problems and recommend the best solution to the technology business, and project teams.

Job DescriptionJob Summary Vanteon is seeking applicants for senior-level hardware roles, including as Principal Hardware Engineer and Senior Principal Hardware Engineer. The specific level will be dependent on the applicant's level of experience. In general, this role is responsible for planning the architecture and development of high-speed hardware design. Experience with RF design is a plus. Duties/Responsibilities The following is a list of expected duties to be involved with the position. It is not fully inclusive, and additional ones may be assigned as determined by management: • Board-level high-speed digital design and schematic capture, • Digital system architecture development & partitioning, • Analyze systems for developing System Requirement Specifications, • Develop detailed designs and technical documentation, • Provide training and mentoring to junior level engineers, • Provide project estimates and technical support for the Sales Process, • Collaborate with other engineers in design and integration efforts.Required Specialized Skills/Knowledge, • Understanding high-speed PCB design and EMC compliance issues, • Design for Testability and Manufacturing, • System and Timing Analysis, • Extensive experience with Altium Designer, • FPGA design experience (100K+ Gates), • Expertise in digital systems, • Experience designing with Bluetooth, USB, Ethernet, Wi-Fi and flash memory, • Excellent analytical and communication skills, • Project leadership skills, • Highly motivated, well-organized self-starterEducation and Experience, • Bachelor of Science in Electrical Engineering (MS Preferred), • 10 years of hardware design experienceOther Requirements, • Training and regular duties require a regular in-office presence. Hybrid/flexible scheduling available based on business needs., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours., • Please note that all offers for hire are contingent on passing e-verify, background and drug screenings. In addition, you must be able to work with ITAR and CUI data.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. Position is eligible for a variety of bonuses including client referrals, employee referral, publications, and extra effort. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job Description Are you passionate about healthcare building engineering systems? We are seeking a Senior Electrical Engineer with a strong background in healthcare building projects to join our Buffalo, NY Office. In this role, you will collaborate with regional leaders and engineering teams to develop concepts, strategies, designs, drawings, specifications, and reports from project inception through construction. You must be able to work independently and as part of multi-discipline teams to drive successful client outcomes in the built environment. This is a unique opportunity to lead and build a team, playing a key role in shaping the future of our healthcare engineering sector. At LaBella, our architects and engineers are problem-solvers, innovators, and change-makers, committed to addressing local and regional challenges, preserving natural resources, and planning for a sustainable future. Duties may include: Project Development & Client Engagement • Scope projects and develop proposals., • Build and maintain relationships with existing and prospective clients., • Function as the lead electrical engineer on multi-discipline projects from proposal through construction., • Serve as a project manager for building engineering-led projects. Electrical Engineering & Design • Develop electrical designs including single-line diagrams, electrical room layouts, panel sizing, lighting, and building systems., • Perform load calculations for generators, transformers, switchgear, MCCs, panel boards, VFDs, feeders, and branch circuits., • Prepare electrical design drawings, specifications, and reports., • Research and present coordinated design solutions., • Conduct building condition assessments and generate reports., • Ensure compliance with national, state, and local regulations, including FGI guidelines, DOH requirements, and CON submissions. Team Collaboration & Leadership • Work closely with mechanical, civil, structural engineers, and architects., • Mentor and train junior engineers., • Delegate and oversee project tasks to ensure successful completion., • Engage with owners, contractors, permitting authorities, and industry organizations. Technical Expertise & Innovation • Serve as Engineer-of-Record and internal technical expert on assigned projects., • Maintain up-to-date knowledge of industry technologies, trends, and best practices., • Passion for healthcare building systems and recognized expertise in the field., • Bachelor’s or Associate’s degree in Electrical Engineering, Engineering Technology, or a related field., • PE license (NY or OH) strongly preferred., • Minimum 10 years of experience in an A/E consulting firm., • Expertise in power distribution, lighting, fire alarm, security systems, and telecommunications design., • Experience with AutoCAD and Revit is a plus., • Familiarity with electrical modeling programs (e.g., AGi32 for lighting, SKM for power analysis)., • Understanding of Arc-Flash Evaluation and electrical safety codes., • Strong writing, organizational, and communication skills., • Attention to detail—because in this role, every detail matters!, • Ability to manage multiple projects simultaneously. Salary Range: $125,000 - $175,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Why Join Us? • Opportunity to lead and grow a team in a respected firm., • Collaborative, mission-driven culture focused on innovation and sustainability., • Work on impactful projects that shape healthcare environments. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Position Title: Senior Product Development Engineer Reports To: VP of Engineering Position Overview: Responsible for the management of product engineering projects including new product development, product line extensions, existing product improvements, and product cost reductions. Tasks & Responsibilities: • Take a leadership role in the development and improvement of FGI product lines by managing engineering projects from concept to commercialization, and coordinating related activities across the company., • Projects range in size from small product improvements, through product line extensions, and up to major new product launches., • Develop and execute project plans for engineering projects including overall project approach, team members and roles, known manufacturing locations, key suppliers/partners, initial make/buy proposal, and major project challenges., • Create and manage project timelines (in MS Project). Monitor critical path items to ensure projects stay on schedule and meet critical milestones, including project deliverables related to product performance, quality, cost, and production launch., • Lead and participate in the product design and development process for assigned projects. This includes high level design oversight and some detailed CAD design work, to guide the team to the optimal product design solution. Conduct regular design reviews with design engineers to evaluate options, solve problems, and ensure product specifications and project goals are achieved., • Create and develop detailed Engineering Bills of Material., • Create cost estimates, and refine and track product cost during product development process to ensure cost targets are met., • Estimate capital equipment costs and timeline for expenditure., • Create purchase requisitions for prototypes, materials, tooling, or equipment as needed to support projects., • Develop product test plans to ensure product performance meets specifications, FGI quality standards, and customer requirements., • Participate in Instruction Manual development to support new projects or product updates., • Work collaboratively with all other departments to ensure good communication of important project information needed to meet project goals., • Work collaboratively with outside design and engineering firms to develop new products to expand beyond FGI’s internal design engineering capacity., • Work collaboratively with, and travel to, domestic and overseas suppliers to address project challenges, manufacturability issues, timelines, product cost, etc., • Identify possible opportunities to obtain patents to protect intellectual property developed by FGI. Work with legal team to provide documentation necessary to support patent applications., • Investigate, research, test, and prove out design proposals for improvements to cost, performance, manufacturability, ease-of-use, customer value, etc., • Participate in continuous improvement activities within the engineering department and with other departments. Identify weaknesses in current products and processes, and propose changes that support departmental and company goals., • Provide Engineering support to Production Control, Manufacturing, QC, and Purchasing on disposition and corrective action for non-conforming material., • Adhere to all department policies and procedures., • 4- year engineering degree in a relevant field from an accredited college or university, • 7+ years of experience in an engineering position at a manufacturing facility, • 5+ years of experience in new product development., • 3+ years of experience with CAD software (SolidWorks preferred)., • Ability to work with a cross-functional team, including members from all levels of the company, to achieve project goals., • Ability to work with suppliers, including travel (domestic and overseas) to visit., • Detailed knowledge of engineering drawings including ability to understand, create, revise, and check., • Strong understanding of manufacturing processes and design for manufacturability, particularly injection molding and associated component design requirements., • MS Office Products – Word, Excel, PowerPoint, Project. About Us: The Fountainhead Group, Inc. is a family-owned and operated company, dedicated to the success and longevity of our business, our employees, and our community. For more than 130 years, FGI has been creating, innovating, and manufacturing liquid sprayer products for the world's top brands and retailers, driven by the hard work of our FGI Family of employees. Across four manufacturing and distribution centers in CNY, our commitment to the betterment of our employees and our community is demonstrated in our robust philanthropy and volunteer programs, supporting more than 350+ local nonprofits and ensuring the success of the community for generations of the FGI Family to come. The Fountainhead Group Inc. is an AAE/EEO employer.

Job DescriptionManager, Mechanical Engineer Description If you are a team player with a passion to drive your career in Mechanical Engineering, we are the place for you! We are seeking Mechanical Engineer Manager to add to our growing and talented team. Responsibilities • Lead and perform engineering evaluations and analyses, field inspections, design drawings, technical specifications and cost estimations., • Lead and perform standard mechanical engineering analysis of existing and new building mechanical, plumbing and fire protection systems utilizing the latest codes and technologies to provide optimized designs., • Knowledge of NYS Mechanical, Energy and Plumbing codes, NFPA., • Proficiency in AutoCAD, Revit MEP and Microsoft Office Suite., • Ability to work in a team and communicate effectively both written and verbally., • BS in Mechanical Engineering/Engineering Technology, • NYS PE required, • 10+ years of post-college experience., • Specific areas of expertise include chilled and hot water systems, industrial process related mechanical, building HVAC, controls, plumbing systems and fire protection., • Professional in-office environment, • The job requires prolonged periods of sitting at a computer., • Travel may be required within NY State. We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/04/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Lead Transmission Engineer to join our team at K&A Engineering in Binghamton, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Lead overall transmission line design for all capital projects, • Conductor Selection, • Structure recommendations, • Insulation, A/C interference, static wire, grounding studies, • Line Design: Plans and Profiles, Cross section details, • LiDAR and aerial photo data, • Utilization of wetlands, vernal pool and sensitive resource data in line and structure design and placement, • Detailed estimate and probability modeling, • Other studies as required to complete the project, • Review/Design transmission line plan and profile drawings using PLSCAD to ensure compliance with Avangrid TM standards and NESC/other standards, • Drive the project plan for transmission line routing and strategy, specifically:, • Decide whether to rebuild existing lines or obtain additional right of way based on area congestion and local politics/permitting issues, • Determine required structure designs based on design constraints, • Bachelor of Science in Electrical Engineering or related degree from an ABET accredited program., • 7+ years of electrical engineering experience within transmission lines, • Perform engineering responsibilities without assistance and minimal supervision., • Strong knowledge in standard engineering techniques and procedures Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Director- Engineering is responsible for leading all aspects of design, engineering, and project management for Renewable Natural Gas (RNG) and other skidded systems applications as the leader of Engineering managers and Project Engineers. This individual will manage the entire Engineering team by providing constant feedback, leadership, mentoring, and communication of Company goals. A key success factor will be the proven ability to develop, implement, and continuously improve Engineering processes and procedures. What are we looking for: • Bachelor's degree in mechanical or electrical engineering or related discipline required. Master's in engineering or MBA preferred., • 5+ years of experience supervising Engineers; demonstrated strength in project management required., • Experience with low volume high value add engineered to order skid fabrication., • Experience with pump skids or other high flow fluid engineered skids., • Experience with LEAN and CI (continuous improvement) activities., • Understanding of RNG equipment including advanced gas compression, rotating equipment and processing systems preferred., • Advanced computer skills and proficiency in MS Office Suite required, CAD and ERP experience a plus., • Ability to set and direct design and engineering philosophy and approach to meet customer needs., • Strong communication and customer service skills required., • Experience with ASME Pressure Vessel Code, pipe welding specifications, and certifications a plus Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job DescriptionJob Summary Vanteon is actively looking for Engineering Coops for the upcoming semesters. The position will be responsible for assisting our experienced team of hardware, embedded software, and FPGA engineers develop solutions for our clients. In addition, you will help support IRAD developments, such as Vanteon's vProtean SDR platform. Duties/Responsibilities The following is a list of the expected duties of this position. Management will adjust them to align with your previous experience and education. • Take direction from assigned mentor and project manager on daily tasks, • Write HDL code for FPGAs, • Write code for microprocessors (C, C++, Python, or other), • Work with hardware design tools (e.g., Altium) to create schematics and PCB layouts, • Work in the lab to build or rework printed circuit boards, • Work in the lab using test equipment (e.g., Oscilloscopes, Spectrum Analyzers, and more) to test circuitsRequired Skills & Knowledge, • Some knowledge of coding for embedded processors or FPGAs is required, or, • Knowledge of hardware design for PCBs (i.e., schematics and PCB layout)Desired Skills:, • Excellent analytical and communication skills, • Highly motivated self-starter, well organizedEducation and Experience:, • Students actively pursuing a Computer Engineering, Electrical Engineering, Computer Engineering Tech, Electrical Engineering Tech, or similar degree.Other Requirements, • Training and regular duties require a regular in-office presence. Hybrid/flexible scheduling is available based on business needs., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job Description About Us Larson Design Group (LDG) is an award-winning, employee-owned Architecture, Engineering, and Consulting Firm. Guided by our core values, we’re expanding our team, opening new offices, and adding new offerings to provide responsive, innovative solutions to clients nationwide. Being 100% employee-owned directly impacts our culture: it drives our decision-making, motivates our teams, increases our productivity, improves retention, and contributes to the future success of our company. Our culture is one where we work hard for our clients and for each other – and we have fun collaborating, sharing experience and expertise, and learning along the way. We’re passionate about delivering exceptional quality, elevating client relationships, enriching the careers and lives of our employee owners, and enhancing the communities where we live and serve. At LDG, we strive to create an organization where people want to work. We offer a flexible work environment, paid training for required licensures, competitive benefits, bonus plans, and a company-funded Employee Stock Ownership Plan (ESOP) while supporting your professional and personal growth. Your Opportunity + Impact The Engineer functions as a technical leader and is required to have a Professional Engineer (PE) license and commensurate work experience. This position will coordinate overall design activities, project submission schedules, and will be responsible for additional Quality Assurance and Quality Control duties to help ensure the final products meet the technical requirements and goals of the client. Key Responsibilities • Performs independent planning and design tasks, reviews work of others, prepares construction documents, and successfully delivers projects to completion., • Has experience with technically complex projects., • Possesses knowledge of codes and standards applicable to design of projects., • Maintains collaborative inter-departmental and cross functional working relationships with members of the project team., • Performs initial QA/QC review of project submissions., • Assists senior management in development of schedules, technical proposals, and labor hour estimates., • Works closely with project teams to effectively describe and deliver scope of work., • Promotes, utilizes, and supports quality assurance and quality control processes to improve the quality of deliverables and reduce design errors & omissions., • Performs and checks design calculations, technical specifications, and prepares cost estimates., • Education: Bachelor’s or Master’s Degree in position relevant Engineering field from ABET accredited school, Landscape Architecture, or related field of study., • Experience: Minimum of five (5) years’ job-related experience., • Must have thorough knowledge of A/E/S industry and the ability to quickly review, understand, and resolve complex design and construction related issues. Larson Design Group, Inc. is an Affirmative Action and Equal Opportunity Employer (EEO) that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization. Powered by JazzHR rk5sCsUjEH

Job DescriptionJob Summary Vanteon is seeking applicants for a Digital Signal Processing Engineer position. The candidate will be responsible for modem and waveform development, digital signal processing, analysis & simulation for wireless systems, and RF system design. This is not an entry-level role; it requires advanced education and experience in communications and signal processing. Only qualified applicants will be considered for this position. Duties/Responsibilities The following is a list of expected duties to be involved with the position. It is not fully inclusive, and additional ones may be assigned as determined by management: • Develop and implement algorithms for digital signal processing applications., • Design and optimize digital filters, signal transforms, and other signal processing techniques., • Analyze and interpret data to extract meaningful insights and develop actionable recommendations., • Collaborate with cross-functional teams to integrate signal processing solutions into hardware or software systems., • Conduct performance evaluation and optimization of signal processing algorithms on various platforms., • Participate in the design and development of real-time signal processing systems., • Troubleshoot and debug signal processing algorithms and systems to ensure optimal performance., • Document design specifications, implementation details, and testing procedures., • Provide technical guidance and support to other team members on signal processing-related issues., • Conduct research and feasibility studies to explore new signal processing techniques and applications., • Perform simulation and modeling of signal processing systems using specialized software tools., • Mentor junior-level engineering staff members.Required Specialized Skills/Knowledge, • Technical experience with:, • Digital communications and RF systems experience, including modem and link margin analysis, • Hardware and FPGA development experience (VHDL or Verilog), • Digital filter techniques, Fourier Analysis, and tracking loops, • RF circuit design (cascades, mixing, amplifiers, filtering, oscillators, etc.), • Nonlinear circuits, measurements, and simulation techniques, • Experience with relevant software tools, including:, • MATLAB/Simulink, plus DSP Systems Toolbox (required), • MathWorks HDL Coder, • Mentor Graphics ModelSim, • LabVIEW, • TI Code Composer Studio, • Xilinx Vivado and Intel Quartus Prime, • Experience using signal generators, network analyzers, spectrum analyzers, and logic analyzers, • Knowledge of common wireless standards and techniques, • Technical project leadership skills, • Strong verbal and written communication skillsEducation and Experience, • Ideal candidates will have a Ph.D. (or be in candidacy) in Communications and Signal Processing, • MS. in Digital Signal Processing (minimum requirement), • 5+ years of experience in digital signal processing design (or related academic research)Other Requirements, • Training and regular duties require a regular in-office presence. Hybrid/flexible scheduling is available based on business needs., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours., • Minimal travel may be required for client visits and tradeshows., • Please note that all offers for hire are contingent on passing e-verification and background and drug screenings. In addition, you must be able to work with ITAR and CUI data.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. The position is eligible for a variety of bonuses, including client referrals, employee referrals, publications, and extra effort. Relocation assistance of up to $15,000 may be available for well-qualified candidates. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job DescriptionWe are seeking a motivated and detail-oriented Engineer to join our team. If you are passionate about data analysis, problem-solving, and continuous improvement, we want to hear from you! Responsibilities: • Conduct thorough investigations related to project or product issues, • Analyze data to identify trends, anomalies, and areas for improvement, • Prepare detailed reports and documentation of findings and recommendations, • Participate in team meetings to discuss progress, challenges, and solutions, • Possibly travel to client sites, project locations, or conferences as neededQualifications:, • Strong analytical and problem-solving skills, • Excellent communication and reporting abilities, • Ability to work independently and collaboratively, • Willingness to travel occasionally, • Prior experience in engineering, data analysis, or related fields preferredBenefits:, • Competitive salary, $30-$34/hr starting pay, • Opportunities for professional growth Powered by JazzHR IPaKQssjiT

Job Description Job Title: Mechanical Design Engineer Reports To: Optics/Systems Engineering Manager Grade: 12 Summary We are seeking an experienced and innovative Mechanical Design Engineer to join our engineering team at a senior level. The successful candidate will lead the design, development, and testing of advanced mechanical components and systems, with a strong emphasis on research, development, and cross-disciplinary collaboration. This role requires demonstrated expertise in product development, project leadership, and the ability to mentor junior engineers, while working closely with manufacturing and quality teams to ensure designs meet performance, cost, and manufacturing objectives. Essential Duties and Responsibilities: • Lead complex analytical work in machine design, dynamics, fluid mechanics, and magnetics., • Oversee and create detailed mechanical designs using Creo CAD software; guide prototype development and ensure designs meet advanced functional, performance, and cost requirements., • Drive precision engineering initiatives, including flexure design, kinematic repeatability, optical mounting, and thermal management., • Identify and implement improvements to existing products by analyzing performance and reliability, incorporating feedback from production, customer service, and field data., • Conduct and supervise simulations, stress analysis, and physical testing to verify design performance; ensure compliance with relevant standards and regulations., • Manage and run test stands and machines, conduct experiments, and build engineering prototypes; oversee the execution of new product development prototype experiments for mechanical/electrical/thermal/fluid systems., • Utilize and train others on sophisticated metrology equipment, including laser position measurement, ball-bar motion equipment, rotation measurement, temperature, fluid flow, and pressure measurement devices., • Write and review concise test reports with justifiable conclusions and recommendations; present findings to cross-functional teams and leadership., • Collaborate with external suppliers and vendors to ensure materials and components meet required specifications; lead supplier development initiatives as needed., • Foster frequent communication and open brainstorming with team members; mentor junior engineers and interns., • Focus on research and development: Lead innovative research to develop new technologies and improve existing products. Collaborate with cross-functional teams to explore new ideas and methodologies. Drive R&D projects to advance technological capabilities and maintain a competitive edge in the industry. Education and/or Experience – Minimum B.S. in Mechanical Engineering or Technology with 7+ years of relevant work experience (MS or PhD preferred); or equivalent combination of education and experience. • Advanced familiarity with motion systems as related to mechanical design., • Advanced understanding of mechanical systems, materials science, and manufacturing processes., • Demonstrated expertise with measurement tools, data acquisition systems, and sensors., • Proven experience with Geometrical Dimensioning and Tolerancing methods; Six Sigma certification preferred. Technical – • Strong technology perspective, particularly related to the manufacture of complex machinery (e.g., CNC machines, machine motion, etc.)., • Expertise in tolerance analysis, stress analysis, FEA (Finite Element Analysis), and thermal management techniques., • Experience leading projects and mentoring junior engineers. Salary Range: $80,000-$115,000. The salary offered will be determined by the candidate's education, experience and other qualifications, considering internal equity among current employees with similar skills and experience. QED is an Equal Opportunity Employer

Job Description Looking for a familia? As an award-winning, woman-owned, minority-owned boutique engineering firm, we’re on the lookout for spirited candidates to join our ever-growing familia. We’re proud to be recognized as a 2025 Best Place to Work in St. Louis, a reflection of our people-first culture and commitment to creating a workplace where everyone thrives. Our mission is simple: deliver world-class engineering services while fostering close-knit collaborations with our clients. You're more than an employee. You're a familia member. As a member of the familia, we make sure this is more than just a job. • Benefits: Top-notch medical, dental, and vision insurance, plus a 401k match, paid time off, and a fun employee recognition platform to celebrate your wins., • Flexibility: We value a life-friendly culture. You’ll collaborate with your supervisor to set a routine that balances your needs and your team’s. PTO and Holidays are included, too., • Diversity: We thrive on diversity and the unique perspectives everyone brings. Our team is a melting pot of skills and experiences, which helps us approach challenges from all angles., • Growth: Your growth is our priority. Whether it’s tuition reimbursement for school or certifications, you’ll work closely with industry pros to map out and achieve your career goals., • Giving Back: We’re all about making a difference. Each year, we set aside paid time off for you to get involved in your community and give back., • Work Environment: Enjoy a relaxed vibe with weekly staff meetings (lunch included!), a fully stocked kitchen, a dog-friendly office, a relaxed dress code, and weekly happy hours! Sound like a familia you're ready to join? Here's the details on what we are looking for in this position: As an intern in our Transmission & Distribution (T&D) Department, you’ll gain hands-on experience in the power utility industry and play a real role in shaping the future of energy. Where You'll Work : • This internship is based at our Rochester, NY office, and will be an on-site role. The program is expected to run from mid-May through early August. What You'll Be Doing: • Partnering with utilities on critical projects such as retrofits, rebuilds, and new construction of distribution and transmission lines., • Conducting field surveys (both in-state and out-of-state) to collect data and see firsthand how projects come to life., • Preparing detailed construction packages that engineers and field teams use to safely and efficiently build infrastructure., • Evaluating the strength and reliability of structures to ensure they meet rigorous safety and performance standards., • Providing support during construction, answering questions, and preparing record documents to keep projects running smoothly., • Reviewing codes and standards such as NESC and client-specific requirements to ensure compliance., • Currently pursuing a degree in Civil, Mechanical, or Electrical Engineering (minimum GPA 2.75)., • Must hold a valid driver’s license and be open to travel (up to 25%)., • Familiarity with Excel and AutoCAD is a plus, but not required—we’ll help you learn! If you’re passionate, diligent, and want to be part of a team that’s changing the game in engineering, we’d love to hear from you. Let’s exceed expectations together and make engineering a space where everyone belongs. Join our team. We're all familia here. Powered by JazzHR SFwYvnEIIq

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Lead Protection & Control Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 10 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD, • IEC 61850/Goose experience required Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Lead Protection and Controls Engineer to join our team at K&A Engineering in Binghamton, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 10 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD, • IEC 61850/Goose experience required Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description RF Field Engineer (Entry Level) – UPNY C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. Description: We are currently seeking an entry level Radio Frequency Field Engineer to join our team in our Syracuse NY office. This position is for full time employment. The candidate will perform site surveys, system designs, gathering existing data and coverage as well as general site information. System troubleshooting, project management, activations, maintenance tickets, optimization, testing as well as some construction will all be a part of the job duties. The ideal candidate should be highly motivated and have the ability to work in a fast paced environment. Applicants must possess strong technical aptitude and be comfortable working in high pressure situations. The candidate will be interacting with customers and co-workers on a daily basis, and must be able to provide timely and detailed updates. Field Engineer will be exposed to various RF applications and should understand the best practices for any given situation. This position will require the individual to be in the field approximately 80% of the time. The candidate must be willing to travel with occasional overnight stays. Responsibilities: • Perform site surveys and in-depth site walkthroughs., • Troubleshoot and repair systems for optimal performance., • Project managing the construction and installation of Distributed Antenna Systems, keeping to all building codes and customer construction requests., • Perform system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment., • Design complete and accurate Distributed Antenna Systems using iBwave software., • Take lead on system commissioning, integrations, and activations., • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers., • Multi-task projects on a day-to-day basis., • Bachelor of Science in Electrical or Mechanical Engineering from an ABET - accredited academic institution., • Understanding of engineering design concepts, testing procedures, and possessing the ability to adapt to new procedures, equipment, and technologies., • Experience with basic construction tools (drills, screwdrivers etc.) and construction practices., • Ability to multitask and keep projects moving through different phases of their lifecycle by staying organized and communicating., • Ability to receive and give direction., • Strong oral and written communication skills., • Ability to work with a team diverse in skill, experience and knowledge., • Experience with 2D modeling programs such as AutoCad or Draftsight is preferred but not required., • Proficient in basic computer applications. (Outlook, Word, Excel, etc.)

Job Description PEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Quality Engineer Your Role: Under the direction of the Quality Director, you will assist in elevating and systematizing engineering and manufacturing processes. Daily activities will require you to proactively identify potential issues to mitigate risk, improve product quality, manage industry and regulatory compliance and assist in delivering corporate strategic initiatives. Responsibilities Include: • Analyzes quality performance data and metrics to identify and drive improvement opportunities. Actively promote and participate in a cross-functional teamwork environment. * Facilitate and promote the use of appropriate problem-solving techniques for effective root cause analysis and successful corrective action for customer complaints and internal nonconformances. * Understand and promote overall compliance with AS9100/ISO9001 and 13485 specifications as they relate to product conformance and contractual requirements. * Understanding of inspection methodologies used to determine compliance for machined and assembled products. * Manage, conduct, and support internal and external audits, publishing findings and recommendations. * Lead in the implementation of assurances, process controls, and corrective and preventative actions (CAPA) related systems designed to meet or exceed internal and external requirements. * Drives continuous improvement and prevention of future failures by helping facilitate the implementation of corrective action. * May be accountable for projects/ programs and developing methods and parameters, project methodology, and/ or project proposals. * Demonstrate a productive work ethic and commitment to quality that sets the standard for PEKO Standards. Basic Qualifications: * Associate degree in Engineering or equivalent. * 2+ years of quality control experience in a manufacturing environment * 4+ years of experience utilization of Quality Management Systems (QMS) * 4+ years of creating and/or managing Design History Files (DHF) and Device Master Records (DMR). * Knowledge of ISO 13485 and AS9100; ability to establish quality protocols and procedures that align with requirements. Preferred Qualifications: * Bachelor’s degree in engineering or equivalent * Strong communication, negotiation, team moderation skills, and ability to manage time and workload constraints. * Good understanding of QA methodologies, tools, and processes. * Knowledge in the application of quality methods and problem-solving tools (TQM, Six Sigma, 8D, 5-Why, Lean Manufacturing, or other continuous improvement methodologies). Work Authorization: US Persons PEKO Perks: * Competitive Compensation * Tuition Reimbursement (IRS Allowable pre-tax Max) * 401K, Medical, Dental, Vision * Flexible Spending & Health Savings Accounts * Life, Short and Long-Term Disability * Recognition Awards & Discretionary Benefits Our Core Values: * We care about our talented and loyal PEKO family. * We are committed to providing a safe, clean, and positive workplace. * We believe in transparency, honesty, and respect for all stakeholders. * We are dedicated to maintaining an agile and financially prudent organization. * We foster the belief that PEKO people are resilient problem-solvers impacting the future. * Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: * This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice A reasonable estimate of the compensation range for this position is $60,000 - $89,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements.. Powered by JazzHR 0pm10NwpBM

Job DescriptionDescription: Highway Design Engineer – Civil/Structural | Shape the Future of Transportation Ready to build the highways of tomorrow? Are you a skilled Highway Design Engineer with a passion for designing safe, efficient, and innovative transportation systems? Join our dynamic team of civil and structural engineering professionals where your expertise in roadway design, highway infrastructure, and transportation engineering will directly impact the communities we serve. In this role, you’ll play a key part in designing highways, roadways, intersections, and other critical transportation infrastructure projects. You’ll collaborate with multidisciplinary teams to solve complex engineering challenges and ensure all designs meet industry standards, environmental requirements, and safety regulations. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Demonstrated ability to efficiently manage highway design projects, including drainage, alignments, and related tasks., • Prepare and maintain comprehensive design plans, detailed specifications, technical reports, and accurate cost estimates., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Proactively support project managers with schedules, documentation, and presentations. Your Impact Matters, Your Career Thrives. Work on engaging Highway Design Engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Highway Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience Highway Design Engineering experience preferred, • EIT required, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD, OpenRoads, and Bridge Design Software preferred., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description Allient-Rochester specializes in advanced motion control and integrated automation solutions that serve OEMs across industries such as aerospace & defense, medical, semiconductor equipment, e-mobility & logistics, industrial automation, and packaging. We are seeking an experienced Senior Application Engineer to support our growing drives, controls, and mechatronic integration business. This position will help the successful launch and deployment of Allient Rochester’s new high-performance servo drives and control platforms. The Senior Application Engineer will work closely with customers, product engineering, and business development teams to apply, validate, and support these new technologies in high-performance applications. Apply now! Responsibilities: • Lead system-level application engineering for automation and motion control projects., • Support OEMs and machine builders in applying Allient’s integrated motion solutions, from concept through commissioning., • Perform system sizing and tuning of servo motors, drives, and motion axes to meet performance and precision requirements., • Develop, test, and troubleshoot control logic using IEC 61131 programming environments (e.g., Structured Text, Ladder Logic)., • Provide technical support during system integration, factory acceptance, and field deployment., • Customize and configure motion control software, HMIs, and PLCs as part of turnkey sub-system solutions., • Collaborate with sales, engineering, and manufacturing teams to ensure solutions are aligned with customer needs and system performance goals., • Assist in application documentation, test plans, and customer training as needed., • Bachelor’s degree in Electrical Engineering, Mechatronics, or a related technical field., • 5+ years of experience in automation or motion control system design and implementation., • Strong background in servo system sizing, tuning, and commissioning., • Proficient in IEC 61131-3 programming languages (Structured Text, Ladder, etc.)., • Working knowledge of motion controllers, drives, servo motors, and feedback systems., • Excellent troubleshooting, communication, and customer-facing skills., • Ability to work independently and as part of a multidisciplinary team., • Experience with Python programming is a plus., • Willingness to travel up to 50%, including time at customer sites and the Rochester, NY facility. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Insero Talent Solutions is recruiting a Senior Quality/Industrial Engineer for an electronics manufacturing company in Rochester, NY. GENERAL RESPONSIBILITIES: Responsible for documentation control and with analyzing, designing, and improving processes and systems to enhance efficiency and quality in electronics manufacturing operations. This role will also be responsible for manufacturing support and quality initiatives, including creating and maintaining product and component data within the SAP System, and change control for both production and R&D. SPECIFIC RESPONSIBILITIES: Responsible for site management of SAP master data such as the generation of part numbers, BOMs, and routings. • Collaborate with engineering, manufacturing, and supply chain personnel to implement product changes for current and next generation products. Maintain documents at various product stages ranging from the creation of part numbers to the release for manufacturing., • Lead quality assurance initiatives to ensure compliance with industry standards and regulations., • Develop and maintain documentation of processes, standard operating procedures (SOPs), engineering/manufacturing changes and training materials in accordance with ISO 9001:2015 and industry standards., • Review and coordinate with Engineering, Sales, and Safety Agencies on product manuals and labeling, • Bachelor’s degree in Industrial Engineering, Quality Engineering, Manufacturing Engineering, or a related field., • Relevant certifications (e.g., Six Sigma, ASQ Certified Quality Engineer) would be beneficial., • Strong knowledge of general manufacturing, quality control, and lean principles., • Skilled in MS Word and Excel; experience with SAP preferred., • Must be detail oriented and organized in reviewing information, identifying issues, evaluating options and proposing solutions., • Effective written and verbal communication.

Job Description Insero Talent Solutions is recruiting a Senior Magnetics Design Engineer for a manufacturing company in Rochester, NY. Job Summary: A leading designer and manufacturer of high- reliability passive components and precision subsystems is seeking an experienced Senior Magnetics Design Engineer to join our Magnetics Design Center Team. In this role, you will develop electrical designs and mechanical configurations for custom transformers, inductors, filters, and other magnetic components. Your responsibilities will include contributing to the design and specification of custom tooling, assembly fixtures, inspection fixtures, BOMs, and process instructions. As a Senior Magnetics Design Engineer, you will leverage your expertise to enhance the company's competitive edge in quotations, new product developments, and successful production, while also engaging in the trial and verification of new technologies. Responsibilities: • Translate customer magnetics requirements into success criteria and specifications for components and processes., • Develop and leverage computer aided modeling and simulation methods for design trade-off analyses, including finite element analyses., • Communicate effectively with customers, suppliers, and team members to support collaborative new product development., • Analyze experimental results from designs of models and prototypes to recommend improvements and cost reduction strategies., • Monitor external technology developments related to power electronics and magnetics design tools and advise management on opportunities and risks., • Participate in daily team huddles to review project statuses and collaborate on overcoming, • Develop milestone plans and deadlines for project completion, ensuring accountability and timely updates on progress., • Establish initial concepts of magnetics solutions in quotations and prototypes, with related manufacturing processes including provision for custom tooling and new special machines, while working with suppliers to create cost-effective designs., • Propose improvements during production to reduce labor time and enhance safety and process, • Develop control plans and test circuits for new magnetics products including custom electrical testing involving sinusoidal, resonant, and non-sinusoidal methods to simulate waveforms and amplitudes of application in measuring dissipation, partial discharge or other selected parameters., • Participate in problem solving sessions involving DFMEA, PFMEA, HALT and PPAP (including MSA & PCP for target factories)., • Support assigned projects, guiding design reviews from prototype through First Article to production, including lifecycle product change control. Collaborate with the Design Center Tiger Team to understand and enhance manufacturing processes for magnetic components, addressing any roadblocks., • Provide technical support to factories by resolving production issues related to manufacturing processes, materials, and inspection., • Attend weekly training sessions on configuration control, drawing requirements, supplier management, and related engineering processes. Qualifications: • BS degree in Electrical Engineering., • 5-10 years of experience in designing custom passive magnetic components for demanding power electronics applications and a demonstrated record of successful results., • Passion for continued professional development in magnetics design methods, materials and, • Proficient in Ansys, Comsol, SolidWorks, and electrical circuit simulation tools (e.g., PSPICE,, • Matlab-Simulink)., • Strong organizational and communication skills to collaborate effectively with global colleagues and suppliers., • Ability to coordinate multiple projects and manage time and resources efficiently., • Must meet eligibility requirements for access to export-controlled data.

Job Description M/E Engineering is currently interviewing for a Mechanical Project Engineer in our Buffalo, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR 92VIfhZaA1

Job Description Hazen is seeking candidates for a principal structural engineer for full-time employment in our Buffalo, NY or Sarasota Springs, NY locations. Candidates must have 5 to 15 years of relevant structural design experience. The position will include a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Client development, project management, technical leadership and staff mentoring opportunities will be possible for the selected individual across Hazen’s Northeast and Midwest businesses. Primary focus will be projects in Upstate NY and PA. Fieldwork and site visits from planning through construction may be required with occasional travel. Responsibilities: • Technical Engineering Leadership., • Business Development, • Prospective applicants should have 5 - 15 years of structural design experience. Prospective applicants must also have a Professional Engineering (PE) license, or ability to obtain such within 6-months, in the State of New York., • This position will require skills in the analysis, design, and construction of environmental structures such as Industrial Buildings, Pump Stations, Process Basins, and Treatment Facilities. The selected individual will lead the structural design and construction administration responsibilities for major projects usually involving upgrades to wastewater, drinking water and reclaimed water treatment plants., • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment.

Job DescriptionDescription: Position Summary The Manufacturing Engineer is responsible for developing, optimizing, and sustaining manufacturing processes to support efficient, high-quality production. This role involves analyzing products and production methods to improve both new and existing operations. Working collaboratively within a cross-functional team environment, the Manufacturing Engineer applies technical expertise to drive continuous improvements that reduce cycle times, enhance product quality, and deliver measurable cost savings. Duties and Responsibilities • Design and implement robust manufacturing processes to ensure product stability, establish production standards, and support ongoing process improvements., • Optimize and innovate manufacturing methods, equipment operations, and overall production performance to enhance efficiency and reduce waste., • Collaborate cross-functionally with engineering, production, and other departments to troubleshoot issues and resolve production challenges., • Research, recommend, and integrate new technologies and systems to upgrade manufacturing capabilities and drive innovation., • Prepare accurate and timely quotes in response to customer deadlines, ensuring feasibility and alignment with production capabilities., • Design and develop end-to-end manufacturing solutions including processes, tooling and fixtures, CNC programs, and detailed work instructions. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in Engineering preferred., • Prior experience as a Manufacturing Engineer or in a similar role is strongly preferred., • Proficient in CAD/CAM software, including SolidWorks, Mastercam, and PartMaker., • Knowledge of CNC manufacturing equipment and quality assurance methodologies., • Skilled in Microsoft Office Suite and experienced with ERP systems., • Strong project management, problem-solving, and multitasking capabilities., • Demonstrated commitment to maintaining health and safety standards., • Able to work both independently and collaboratively within a team environment. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job Description TekPro is partnered with a premier contract machining company in the Rochester, NY area in their search for a Manufacturing Engineer! This position is focused on MasterCAM programming, tooling/fixture design, and process engineering for complex parts in the aerospace, defense, and medical industries. This position typically offers high hourly pay and lots of overtime for tremendous earning potential, but can be flexible for a salaried job offer as well. Position Summary Responsible for developing and optimizing manufacturing processes. Analyze products and methods to innovate both new and existing operations. Drive enhancements that reduce cycle times, elevate product quality, and generate significant cost savings. Duties and Responsibilities: • Ensure product stability and support manufacturing by designing robust process capabilities, establishing standards, and continually improving the manufacturing process., • Optimize & innovate manufacturing, production process, machine operations and overall performance.  Collaborate with management, manufacturing & other departments to troubleshoot production needs., • Upgrade systems and processes with new technology., • Meet customer deadlines on quotes., • BS degree in Engineering or commensurate work experience, • Previous experience as a manufacturing engineer or similar role preferred., • Proficient in CAD/CAM software (SolidWorks, Mastercam, Part Maker)., • Familiarity with manufacturing equipment and quality assurance techniques (CNC equipped)., • Proficient in Microsoft Office and ERP systems., • Strong project management, problem-solving, and multitasking abilities., • Continuous commitment to health and safety standards., • GD&T, • CNC Tooling, • CNC Programming, • Design for Manufacturability (DFM), • Machine Setups for Production Runs, • CNC Mill (3-4 axis VMC), • CNC Lathe (2-4 axis), • CAM Software (Mastercam), • CNC Mill (5+ axis VMC)

Job Description We are seeking a Senior Electrical Engineer with a strong focus and background in Building Projects to work in our Syracuse, NY Office. This position will work closely with engineering staff to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams producing electrical engineering documents. Duties • Interact closely with mechanical, civil, structural engineers and project architects, • Function as lead electrical engineer for multi-discipline projects, through all phases (proposal, design, bidding and construction)., • Perform code reviews., • Delegate and monitor project tasks to junior team members., • Meeting with external and internal clients., • A Bachelor’s degree is required., • A minimum of 10 years of experience working at an A/E consulting firm is required., • New York State Professional Engineer’s license is preferred., • AutoCAD and Revit experience is a plus., • Experience in electrical distribution systems, power, lighting, and utilities, as well as communications, security, and fire alarm systems are desired. Salary range: $100,000.00 - $135,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionCompany Description Kennedy Valve, a member of the McWane family of companies, is a gray and ductile iron foundry and computerized machining and assembly company. We have been an active community partner in Elmira, New York, for over 118 years. People providing peace of mind water solutions. To save lives, resources, and property by supplying the best waterworks and fire protection products in the world. Our culture is important to us and forms the foundation for everything we do. Successful Team Members will embrace and perform in accordance with our following core values: Safety: People First – Step Up Environment: Protect Our Communities – Keep It Clean Leadership: I am Always On Stage – First Manage My Own Words & Behaviors Accountability: Lead Myself Well – Own It, Correct It, Learn From It, Move On Excellence: Always Working To Be Better – Value & Add Value Trust: The Speed Of Trust – Build, Don’t Break Teamwork: Help Each Other Be Great – Win Together Communication: Clear, Candid, & Constructive – Right Words, Right Time, Right Way WHY KENNEDY VALVE? Kennedy Valve offers great wages and robust benefits packages, as well as stability and a sense of team! • Highly Competitive Salary $123,000-$152,559, • Prorated vacation for the first year of employment, • 12 Paid Holidays and Paid Sick Leave, • Retirement: 401(k) & Roth IRA options with company match, • Educational Reimbursement after one year of service, • Employer-paid life insurance with the option to supplement, • Comprehensive Medical, Vision, and Dental plan options Job Description SUMMARY: We are seeking an experienced, detail-oriented Engineering and Quality Assurance manager to join our team. In this position, the incumbent will play a key role in the overall success of our organization by planning, managing, and monitoring the Product Design Engineering and Quality Assurance functions. This position is responsible for overseeing various engineering and quality projects, processes, budgets, timelines, accreditation audits, and making any necessary adjustments in order to ensure successful completion of goals. This position leads a team comprised of an Engineering Supervisor, a QA Supervisor, engineers, technicians, and quality professionals. BASIC DUTIES AND RESPONSIBILITIES: • Serve as the Product Design Engineering and Quality Assurance leader and technical expert., • Lead the Engineering, Quality Team Members, and other departments through proactive facilitation, mediation, and resourcefulness., • Create/maintain detailed engineering plans, processes, and procedures for Engineering and Quality staff., • Manage oversite of the ISO Quality Management System., • Support the daily review of production quality performance., • Monitor scrap, and improve the development of scrap reduction plans., • Build and review BOMs and product costing., • Validate and verify accuracy of the work performed and the methods used by Engineering and Quality team members. Conduct various tests and quality assurance checks to verify the quality of completed projects., • Monitor and determine various Team Member training needs and provide development opportunities., • Support various research and development initiatives to identify opportunities for new projects and improved processes., • Communicate and collaborate with other leaders, departments, suppliers, and contractors., • Prepare and deliver various engineering-related and quality assurance-related presentations, both internally and externally.Qualifications, • Minimum of a bachelor’s degree in mechanical engineering or related field., • Master’s degree in engineering management, business administration, or other related field is preferred., • 6+ years of experience in engineering and quality management roles, preferably in the heavy manufacturing industry., • Demonstrated experience in Quality Assurance, Six Sigma, or Continuous Improvement. Strong analytical and problem-solving skills., • Familiarity with relevant industry standards and regulatory requirements (e.g., AWWA, UL, FM, MSS, NSF…), preferred., • Experience with CAD software (e.g., SolidWorks) and other engineering tools., • Strong understanding of fluid dynamics and materials science., • Leadership and people skills are necessary to manage and develop a team., • Organizational competencies and project management skills to keep projects, processes, and teams on track., • Self-motivated attitude with the ability to multitask and thrive in a timeline-driven environment., • Interpersonal communication skills with expertise in distilling complicated topics to a broader audience., • Ability to work individually or as part of a team. PHYSICAL REQUIREMENTS • Time spent in office setting and on production floor., • Occasionally standing for long periods of time, walking throughout the facility daily., • Performing Engineering Qualification Tests and QA assessments onsite or at certifying labs., • Occasional travel may be required., • Exposed to elements, such as cold, heat, noise, dust, odors, fumes, etc., • Work time is spent on the manufacturing floor, Engineer/QA Lab, and office setting. Additional Information Kennedy Valve Co. is an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and reserve the right to perform substance abuse testing. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation , veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA - gender identity or expression, and genetic information) or any other category protected by federal, state or local law. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.