Engineering jobs in New York - Page 5

Job Description$43600 - $71300Associate Quality Engineer - New Hartford NY SummaryThis position as Associate Engineer performs entry level professional assignments and follows established policies. This position requires some professional judgment and a limited use and/or application of basic principles, theories, and concepts Essential Functions • Schedule preventative maintenance for laboratory equipment as required., • Maintain a tidy work area and always work safely., • Analyze VIM/ESR/VAR/Anneal charts and records., • Check to make sure all VAR/ESR sequence numbers and heat numbers are present and consistent on all charts and records., • Check to make sure all charts conform to applicable internal procedures., • Print out the electronic chart associated with each record and combine each VAR BBD & PLD chart, • Run the SMC Post Processor on the data from each record (when applicable)., • Perform calculations for material removal when necessary., • Create Internal Review Reports when required and answer any Variances associated with the records, consulting the Process Engineers when necessary., • Input data into Oracle and TIS., • Prepare each record for record retention and storage., • Able to run all optical microscopes and the software associated with them., • Observe and acquire images of defects, grain structure and phase morphology on each specimen as requested., • Calibrate the microscopes with computers every six months., • Perform full Metallographic evaluations of Sonic Indications as required., • Create digital images (Photographs) of slices and customer material as requested by Engineers., • Keep a master log of all work performed – by date with description of job performed.QualificationsEducation and Experience, • A minimum of an Associate’s degree in a Technical, Science or related discipline or an equivalent combination of education and experience is required. At least 1year of manufacturing or lab experience in the aerospace materials industry is preferred., • Employee must be able to demonstrate core competencies within 6 months of employment.Special Skills, • Must have instrumental, analytical and/or metallographic experience as well as knowledge of computers, photography and basic metallurgy., • Must be able to work independently, • Good communication skills, • Flexible under changing priorities, • Good visual acuity, • Strong attention to detailINDITES

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Lead Protection & Control Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 10 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD, • IEC 61850/Goose experience required Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description LaBella Associates, is seeking an Entry Level Electrical Engineer with a career interest in Building Projects. This position will work with other Engineers as part of a Project Team to develop concepts, strategies, designs, drawings, specifications and reports. Duties may also include assisting with energy clients. Job Duties • Work with other engineers as part of a Project Team to develop concepts, strategies, designs, drawings, specifications and reports., • Bachelor’s or Associates Degree required., • Background in AutoCAD and/or Revit is preferred., • Experience in the A/E consulting business is a plus. Salary Range: $60,000.00 - $80,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Looking for a familia? As an award-winning, woman-owned, minority-owned boutique engineering firm, we’re on the lookout for spirited candidates to join our ever-growing familia. We’re proud to be recognized as a 2025 Best Place to Work in St. Louis, a reflection of our people-first culture and commitment to creating a workplace where everyone thrives. Our mission is simple: deliver world-class engineering services while fostering close-knit collaborations with our clients. You're more than an employee. You're a familia member. As a member of the familia, we make sure this is more than just a job. • Benefits: Top-notch medical, dental, and vision insurance, plus a 401k match, paid time off, and a fun employee recognition platform to celebrate your wins., • Flexibility: We value a life-friendly culture. You’ll collaborate with your supervisor to set a routine that balances your needs and your team’s. PTO and Holidays are included, too., • Diversity: We thrive on diversity and the unique perspectives everyone brings. Our team is a melting pot of skills and experiences, which helps us approach challenges from all angles., • Growth: Your growth is our priority. Whether it’s tuition reimbursement for school or certifications, you’ll work closely with industry pros to map out and achieve your career goals., • Giving Back: We’re all about making a difference. Each year, we set aside paid time off for you to get involved in your community and give back., • Work Environment: Enjoy a relaxed vibe with weekly staff meetings (lunch included!), a fully stocked kitchen, a dog-friendly office, a relaxed dress code, and weekly happy hours! Sound like a familia you're ready to join? Here's the details on what we are looking for in this position: As an intern in our Transmission & Distribution (T&D) Department, you’ll gain hands-on experience in the power utility industry and play a real role in shaping the future of energy. Where You'll Work : • This internship is based at our Rochester, NY office, and will be an on-site role. The program is expected to run from mid-May through early August. What You'll Be Doing: • Partnering with utilities on critical projects such as retrofits, rebuilds, and new construction of distribution and transmission lines., • Conducting field surveys (both in-state and out-of-state) to collect data and see firsthand how projects come to life., • Preparing detailed construction packages that engineers and field teams use to safely and efficiently build infrastructure., • Evaluating the strength and reliability of structures to ensure they meet rigorous safety and performance standards., • Providing support during construction, answering questions, and preparing record documents to keep projects running smoothly., • Reviewing codes and standards such as NESC and client-specific requirements to ensure compliance., • Currently pursuing a degree in Civil, Mechanical, or Electrical Engineering (minimum GPA 2.75)., • Must hold a valid driver’s license and be open to travel (up to 25%)., • Familiarity with Excel and AutoCAD is a plus, but not required—we’ll help you learn! If you’re passionate, diligent, and want to be part of a team that’s changing the game in engineering, we’d love to hear from you. Let’s exceed expectations together and make engineering a space where everyone belongs. Join our team. We're all familia here. Powered by JazzHR SFwYvnEIIq

Job DescriptionDescription: Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We are seeking a skilled Quality Engineer to drive quality excellence through process improvement, quality system management, and engineering solutions. This role combines technical expertise with leadership to ensure product quality, maintain compliance standards, and foster a culture of continuous improvement across the organization. This hands-on role requires significant shop floor presence, working directly with inspectors and operators to ensure quality standards are maintained in real-time. The ideal candidate must be comfortable balancing theoretical quality principles with practical, day-to-day production support. Key Responsibilities: • Maintain an active floor presence throughout production areas and work directly with quality personnel to resolve quality issues in real-time., • Guide operators through complex inspection requirements and troubleshoot quality issues on the spot., • Collaborate with customers to complete source inspections., • Support production with immediate quality decisions., • Ensure proper use of inspection equipment and validate inspection methods in real production conditions., • Assist quality leadership personnel with auditing company policies, procedures, and systems that affect product quality to assure compliance with the company’s quality system and good manufacturing processes., • Establish and implement product and process quality standards while remaining in compliance with ISO9001, AS9100 and NADCAP requirements., • Lead INCR/NCR investigations., • Complete analysis on incoming products and approve all product receipts., • Inspect and test materials, equipment, processes, and products to ensure quality specifications are met., • Develop user-friendly inspection documentation for operators, such as visual aids and inspection guidelines., • Develop First Article Inspection (FAI) documentation and procedures., • Maintain inspection documentation system and update inspection procedures., • Specify and order appropriate inspection gauges and develop gauge control and calibration requirements., • Identify customer flow down requirements., • Collaborate with operations managers on process control development., • Develop, implement, and validate corrective actions for quality issues to prevent issue recurrence. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in engineering, Manufacturing, or related technical field with 3+ years quality engineering experience OR associate’s degree in related technical field with 5+ years of progressive quality experience in manufacturing and comprehensive understanding of quality principles., • Demonstrated proficiency in GD&T and blueprint reading., • Experience with measurement equipment and gauging systems., • Practical knowledge of SPC and quality tools., • Understanding of ISO 9001, AS9001 and NADCAP quality systems., • Background in manufacturing environment – precision machining or aerospace highly preferred., • High proficiency in computer technology and systems operations., • Strong analytical and problem-solving skills couples with an attention to detail. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job Description Javlyn Process Systems a member of Krones Process Group North America is seeking a skilled Electrical Controls Engineer to develop, design, and implement electrical and automation systems for liquid processing facilities. The ideal candidate will have a strong background in industrial control systems, electrical schematics, and process automation specific to fluid handling systems. Javlyn Process Systems is a process engineering and control system integration company employing degreed Computer, Electrical, Chemical, and Mechanical engineers. Our focus is on providing automated process system solutions for the food, beverage, dairy, and pharmaceutical industries. We fulfill a niche within these industries by offering custom solutions and professional services to design and operate manufacturing facilities under optimal conditions. We are a subsidiary of Krones AG, an international firm with over 20,000 employees worldwide. Key Responsibilities: • Electrical Design & Documentation, • Develop detailed electrical design packages including control panel layouts, wiring, • diagrams/schematics and I/O lists., • Develop Motor Control Center designs and layouts., • Select and specify electrical components (PLC I/O, Safety Equipment, VFDs, Enclosures,, • etc.) suitable for liquid processing environments., • Ensure compliance with industry standards., • Process Integration, • Collaborate with process engineers to integrate control systems with pumps, valves and field instrumentation that measure temperatures, flows, pressures, levels, etc., • Project Execution & Support, • Participate in cost estimating., • Lead electrical checkout efforts at control panel fabrication shops., • 5 to 15 years of experience in electrical and automation design, preferably in the liquid processing industry (e.g., dairy, food, brewing, chemical, etc)., • Experience designing control systems with PLC’s, • Proficiency with AutoCAD and/or AutoCAD Electrical., • Proficiency with Microsoft Word and Excel., • Knowledge of applicable electrical codes and standards., • Degree or diploma in Electrical Engineering, Automation, or related field., • Familiarity with process instrumentation., • Combination of office-based design work and field/site visits. Travel (20-25%) throughout the U.S. is required. The amount of travel varies based on project assignments, project location, and level of responsibility.

Job Description Mechanical Engineering Intern-Spring Semester Summary The Mechanical Engineering Intern provides support to Engineering, R&D, Manufacturing and Quality, in various capacities. Essential Duties and Responsibilities include the following. Other duties may be assigned. Conduct experiments as defined by Engineering and other groups. Support development/R&D activities via conducting experiments and summarizing findings, building mechanical and opto-mechanical assemblies, etc. Assist in developing test plans. Execute test plans, summarize/analyze data and report findings. Utilize sophisticated metrology equipment including interferometers, laser position measurement equipment, ball-bar motion equipment, rotation measurement equipment, temperature, fluid flow and fluid pressure measurement devices. Communicate frequently with team members. Openly brainstorms with team members. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience – Currently enrolled in a Bachelor’s or Master’s degree program in Mechanical Engineering or a closely related field. Relevant coursework in areas such as machine design, dynamics, fluid mechanics, and magnetics. Previous internship or co-op experience in a mechanical engineering role a plus. Working knowledge of machine shop equipment and tools. Machining experience is a plus. Familiarity with a variety of measurement tools, data acquisition systems and sensors. Experience with Six Sigma methodologies a plus. Experience with Geometrical Dimensioning and Tolerancing methods a plus. Experience with CAD software for creating detailed mechanical designs, PTC CREO detailing experience a plus. Computer Skills: Experience with Excel or Mini-Tab to capture, graph, analyze and communicate test data is preferred. Basic word processing, spreadsheet, and presentation software skills are required. Demonstrated aptitude for learning new software. Technical - Strong technology perspective particularly related to the optics industry through prior experience. Travel – Travel is not a primary part of this job. The position is an hourly paid position with a pay range of $22.00 to $27.00 based on the candidates education level, and prior internship and project related experience. We would prefer a candidate who can work 40 hours a week during the internship period, but would consider a candidate interested in part-time (less than 40 hours). QED Technologies is an Equal Opportunity Employer

Job Description LaBella Associates is currently seeking an Electrical Engineer in our Rochester, NY office. Duties • Preparation of electrical design drawings, specifications, and reports, • Responsible for project construction (submittal review, construction observation, and punch lists), • Interact closely with mechanical, civil, structural engineers and project architects, • Prepare electrical design drawings using Revit and AutoCAD., • Perform lighting calculations and arc flash studies., • Perform field investigations to document existing conditions. Requirements • Building system design experience focused on power distribution, lighting, fire alarm, security systems & telecommunication, • Proficiency in Revit, AutoCAD, MS Excel and Word, • Familiarity with electrical modeling programs – Lighting software AGi32, Power software SKM, • Familiarity with Arc-Flash Evaluation, • Bachelor’s degree in electrical engineering, • Minimum 5 years engineering experience involving building systems projects, • Strong writing, organizational and communications skills, • Ability to work on several projects simultaneously, • On path towards New York PE license preferred, not required Salary Range: $75,000 - $105,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Automation Substation Engineer to join our team at K&A Engineering in Binghamton, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • The position will be responsible for developing SCADA maps RTUs under Avangrid's standards., • Will support point to point testing and commissioning in the SCADA/EMS system, • Includes the creation of substation construction drawing packages and the procurement of minor materials (Drawings shall include one-line diagrams, plot plans, grading plans, foundation plans and details, grounding plans and details, conduit plans and details and general arrangement elevation and plan views. Minor materials shall include structures, bus work, foundation, conduit, and grounding material)., • Seven (7) years or more of relay/protection settings engineering and substation automation/ communications experience within electrical utilities, • Bachelor’s degree in electrical engineering or electrical engineering technology, • IEC 61850/Goose experience preferred, • Preliminary & Conceptual Design, • HMI (GE Cimplicity, ASE SAM) and SCADA Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance Check out our career page for more information! The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Lead Protection and Controls Engineer to join our team at K&A Engineering in Binghamton, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 10 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD, • IEC 61850/Goose experience required Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description We are currently hiring an Architectural Technician in our Architectural division at our Syracuse office. The Architectural Division at LaBella provides comprehensive planning and design within dedicated studios with projects ranging from targeted renovations and facility maintenance to projects that define communities. We believe architecture is more than creating, maintaining, and resurrecting the buildings in which we live, work, learn, and engage – it’s about beautifying and bettering the communities we call home. The overall expectations of this position are to produce construction drawings and understand basic construction practices for implementation during construction administration. Additionally, this position will be expected to produce presentation graphics, conceptual 3d models, and be capable of drafting redlines and creating outline floor plans in an efficient manner. Basic construction administration will be performed. It must be understood that assignments and hence supervision will differ from time to time. A successful candidate will be self- motivated with the willingness to learn, train, and continue building their architectural knowledge. The candidate will be trustworthy and punctual have a positive attitude and possess leadership and communication skills. Requirements • Minimum 3 year of experience working for an Architectural/Engineering Consultant., • Minimum associates degree (Bachelor’s degree in Architecture desirable)., • Proficient in Revit., • Must have good planning skills. Salary Range: $45,000.00 - $65,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description At Atlantic Testing Laboratories (ATL), we offer a dynamic career that blends fieldwork with office assignments. With more than 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. ATL is an expanding firm and is in search of qualified Geotechnical Engineer or Project Geologist candidates. Experienced and entry level/early-career candidates are encouraged to apply. Geotechnical Engineer/Project Geologist Perks & Benefits: • Competitive pay ranging from $68,000 to $85,000/year, • A mix of field and office assignments, • Directed experience and financial support for professional licensure (EIT, PE, IG, PG), • Work directly with Senior Engineers and Project Managers, • Advancement opportunity, • Company vehicle to travel between office and job sites, • Competitive Health Insurance; multiple plans offered, • Paid Vacation/Sick/Personal/Holidays, • Safety training and equipment, • B.S. in Civil Engineering, Civil Engineering Technology, Geology or related degree, • NYS PE, PG, EIT or IG license/certificate or ability to obtain within one year, • Strong written and verbal communication skills, • Ability to review and interpret project plans and specifications, • Ability to effectively multitask, • Positive attitude with ability to work independently and in a team environment, • Perform evaluation of subgrade preparation for shallow foundations, • Monitor the installation of deep foundation systems, • Perform construction materials engineering, geotechnical evaluations and special inspections during construction, • Provide technical support to Construction Materials Technicians, • Project Management duties including preparation and review of proposals, client management, technical reviews of reports, and review of project invoices, • Preparation and distribution of technical reports and project correspondence

Job Description 5 Axis Manufacturing Engineer • At least 5 years of experience specifically working with milled parts, and taking on more responsibility over time., • At least 5 years of hands-on experience operating machining equipment., • Experience using CAD/CAM software to program CNC machines (Siemens NX is a plus). Comfortable writing G&M Code., • Strong knowledge of cutting tools and how to hold parts in place during machining. Experience with quick-change tools and automation is a bonus., • Good understanding of how to design efficient processes for CNC machining of complex parts., • Experience developing automated and advanced manufacturing processes., • Able to read blueprints and understand technical drawings, including GD&T (Geometric Dimensioning & Tolerancing)., • Must have experience programming 5-axis machining centers. Familiarity with machines such as Okuma MU-4000V, MU-5000V, MU-8000V, and Mazak I-600is a plus., • Experience machining complex parts using a variety of aerospace materials like aluminum, titanium, and stainless steel.

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities • Ability to motivate and mentor junior staff., • Project management, communication and multi-tasking skills., • Ability to work with internal and external staff on an individual and team basis., • Ability to challenge one’s self and broaden knowledge base., • Bachelor's of Science or Technology in Electrical Engineering, • 5-10 years of related experience, • PE preferred, FE required, • Experience with the National Electric Code., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash., • Experience with the layout and design of low voltage building distribution systems. *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionAchieve more with Volt Volt is immediately hiring for a Manufacturing Engineer in Rochester, NY As a Manufacturing Engineer you will: The Manufacturing Engineer II operates with minimal supervision and is responsible for designing, implementing, and optimizing manufacturing processes within a single facility. This role supports the production of both new and existing products by improving efficiency, quality, cost, and safety. It may also involve planning assembly layouts, testing new systems, and managing capital projects, all while ensuring compliance with regulatory standards. • Plans and designs basic manufacturing processes, • Determines equipment and tooling needs, • Develops and implements efficiency, safety, and cost-focused projects, • May lead small teams, • Advises on design concepts and specifications, • Ensures processes meet regulatory standards, • Applies technical standards and principles, • Investigates and resolves quality issues, • Suggests corrective actions, • Performs other duties as assigned This is a full time, Direct Hire opportunity. The ideal candidate will have: • Bachelor’s Degree in Engineering or related field, • 2–5 years of relevant experience, • Proficient in applying engineering concepts to solution lines, • Strong analytical and problem-solving skills, • Experience with continuous improvement methods (e.g., pull systems, JIT, process mapping), • Working knowledge of:, • Data structures and database programming, • CAD/CAM and computer-aided manufacturing systems, • Standard business and data analysis software, • Engineering drawings and specifications, • Geometric dimensioning and tolerancing (GD&T), • Strong verbal and written communication skills, • Well-organized, detail-oriented, and able to multitask, • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Access, Outlook) Salary: $70,000-$80,000 *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.

Job Description PEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Quality Engineer Your Role: Under the direction of the Quality Director, you will assist in elevating and systematizing engineering and manufacturing processes. Daily activities will require you to proactively identify potential issues to mitigate risk, improve product quality, manage industry and regulatory compliance and assist in delivering corporate strategic initiatives. Responsibilities Include: • Analyzes quality performance data and metrics to identify and drive improvement opportunities. Actively promote and participate in a cross-functional teamwork environment. * Facilitate and promote the use of appropriate problem-solving techniques for effective root cause analysis and successful corrective action for customer complaints and internal nonconformances. * Understand and promote overall compliance with AS9100/ISO9001 and 13485 specifications as they relate to product conformance and contractual requirements. * Understanding of inspection methodologies used to determine compliance for machined and assembled products. * Manage, conduct, and support internal and external audits, publishing findings and recommendations. * Lead in the implementation of assurances, process controls, and corrective and preventative actions (CAPA) related systems designed to meet or exceed internal and external requirements. * Drives continuous improvement and prevention of future failures by helping facilitate the implementation of corrective action. * May be accountable for projects/ programs and developing methods and parameters, project methodology, and/ or project proposals. * Demonstrate a productive work ethic and commitment to quality that sets the standard for PEKO Standards. Basic Qualifications: * Associate degree in Engineering or equivalent. * 2+ years of quality control experience in a manufacturing environment * 4+ years of experience utilization of Quality Management Systems (QMS) * 4+ years of creating and/or managing Design History Files (DHF) and Device Master Records (DMR). * Knowledge of ISO 13485 and AS9100; ability to establish quality protocols and procedures that align with requirements. Preferred Qualifications: * Bachelor’s degree in engineering or equivalent * Strong communication, negotiation, team moderation skills, and ability to manage time and workload constraints. * Good understanding of QA methodologies, tools, and processes. * Knowledge in the application of quality methods and problem-solving tools (TQM, Six Sigma, 8D, 5-Why, Lean Manufacturing, or other continuous improvement methodologies). Work Authorization: US Persons PEKO Perks: * Competitive Compensation * Tuition Reimbursement (IRS Allowable pre-tax Max) * 401K, Medical, Dental, Vision * Flexible Spending & Health Savings Accounts * Life, Short and Long-Term Disability * Recognition Awards & Discretionary Benefits Our Core Values: * We care about our talented and loyal PEKO family. * We are committed to providing a safe, clean, and positive workplace. * We believe in transparency, honesty, and respect for all stakeholders. * We are dedicated to maintaining an agile and financially prudent organization. * We foster the belief that PEKO people are resilient problem-solvers impacting the future. * Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: * This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice A reasonable estimate of the compensation range for this position is $60,000 - $89,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements.. Powered by JazzHR 0pm10NwpBM

Job Description Hazen is seeking candidates for a Sr. Associate position focused on structural and waterways engineering and project management. Candidate will be involved with a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Candidate shall be capable of supervising junior staff and managing projects. Candidate shall also be able to lead business development activities including preparation of proposals and presentations. The position will include client development, project management, technical leadership and staff mentoring in the Northeast and Midwest. Primary focus will be projects in Upstate NY and PA. Fieldwork and site visits from planning through construction may be required with occasional travel. Responsibilities: • Project Management., • Technical Engineering Leadership., • Business Development., • Prospective applicants must have more than 15 years of structural design experience. Prospective applicants must also have a Professional Engineering (PE) license, or ability to obtain such, in the State of New York. Multiple state registrations are preferred., • This position will require skills in the analysis, design, and construction of environmental structures such as Industrial Buildings, Pump Stations, Process Basins, and Treatment Facilities. The selected individual will lead the structural design and construction administration responsibilities for major projects usually involving upgrades to wastewater, drinking water and reclaimed water treatment plants., • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment.

Job DescriptionManager, Mechanical Engineer Description If you are a team player with a passion to drive your career in Mechanical Engineering, we are the place for you! We are seeking Mechanical Engineer Manager to add to our growing and talented team. Responsibilities • Lead and perform engineering evaluations and analyses, field inspections, design drawings, technical specifications and cost estimations., • Lead and perform standard mechanical engineering analysis of existing and new building mechanical, plumbing and fire protection systems utilizing the latest codes and technologies to provide optimized designs., • Knowledge of NYS Mechanical, Energy and Plumbing codes, NFPA., • Proficiency in AutoCAD, Revit MEP and Microsoft Office Suite., • Ability to work in a team and communicate effectively both written and verbally., • BS in Mechanical Engineering/Engineering Technology, • NYS PE required, • 10+ years of post-college experience., • Specific areas of expertise include chilled and hot water systems, industrial process related mechanical, building HVAC, controls, plumbing systems and fire protection., • Professional in-office environment, • The job requires prolonged periods of sitting at a computer., • Travel may be required within NY State. We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/04/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description M/E Engineering is currently interviewing for a Mechanical Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR OWWlxUAU1O

Job Description Job Summary: The Sr Manufacturing Engineer is responsible for driving improvements in the performance and capabilities of our precision machining operations that include CNC Milling and Turning equipment. They will lead focused projects to optimize cycle times, improve yields, increase machine efficiencies, and introduce new products into the factory. They will also support the manufacturing operations to deliver quality products on-time to customers. Essential Duties and Responsibilities: • Process development, machine programming, and prototype development work., • Provide technical support to machinists and operators to ensure smooth production runs., • Troubleshooting of equipment issues and resolution of problems related to tooling, setup, and machine performance., • Use CAD and CAM software to create part models, toolpaths, and detailed machining instructions for CNC machines., • Consulting with Chief Manufacturing Engineer, Program Management, Quality, and Engineering regarding part quality requirements and to ensure that designs are manufacturable and meet tolerance requirements., • Consulting with customers and internal applications engineering regarding current projects and upcoming projects., • Participate in strategic improvement events focused on improving throughput, profit margins, and overall manufacturing efficiency., • Lead Quality improvement efforts for assigned work areas / programs., • While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to operate machinery and tools., • The employee may be required to lift up to 50 pounds occasionally., • The work environment includes exposure to noise from machinery and a variety of physical demands, including the use of precision instruments., • Protective equipment such as safety goggles, hearing protection and other safety equipment required to perform the job effectively and in a safe manor., • Bachelor’s of Engineering Degree from a four year college or >5 years related work experience., • Relevant certifications (i.e. MasterCam programming) are highly desired., • Hands-on experience with CNC machines, milling machines, lathes, grinders, and other precision machining equipment. Expertise with horizontal and vertical 5 axis milling as well as multi axis turning and mill turn is a must., • Experience using precision measurement instruments (e.g. micrometers, calipers, height gauges, CMM machines), • Solid knowledge of manufacturing quality control processes and standards., • Ability to work independently and in teams in a fast-paced, high-tech environment., • Excellent communication and interpersonal skills aligned with our Mission-Vision-Values., • Proficient in Microsoft Office Suite (Excel, Word, Outlook) and other relevant software for managing production and performance metrics.

Job DescriptionJob Summary Vanteon is seeking applicants for senior-level hardware roles, including as Principal Hardware Engineer and Senior Principal Hardware Engineer. The specific level will be dependent on the applicant's level of experience. In general, this role is responsible for planning the architecture and development of high-speed hardware design. Experience with RF design is a plus. Duties/Responsibilities The following is a list of expected duties to be involved with the position. It is not fully inclusive, and additional ones may be assigned as determined by management: • Board-level high-speed digital design and schematic capture, • Digital system architecture development & partitioning, • Analyze systems for developing System Requirement Specifications, • Develop detailed designs and technical documentation, • Provide training and mentoring to junior level engineers, • Provide project estimates and technical support for the Sales Process, • Collaborate with other engineers in design and integration efforts.Required Specialized Skills/Knowledge, • Understanding high-speed PCB design and EMC compliance issues, • Design for Testability and Manufacturing, • System and Timing Analysis, • Extensive experience with Altium Designer, • FPGA design experience (100K+ Gates), • Expertise in digital systems, • Experience designing with Bluetooth, USB, Ethernet, Wi-Fi and flash memory, • Excellent analytical and communication skills, • Project leadership skills, • Highly motivated, well-organized self-starterEducation and Experience, • Bachelor of Science in Electrical Engineering (MS Preferred), • 10 years of hardware design experienceOther Requirements, • Training and regular duties require a regular in-office presence. Hybrid/flexible scheduling available based on business needs., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours., • Please note that all offers for hire are contingent on passing e-verify, background and drug screenings. In addition, you must be able to work with ITAR and CUI data.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. Position is eligible for a variety of bonuses including client referrals, employee referral, publications, and extra effort. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job DescriptionJob Summary Vanteon is seeking applicants for a Digital Signal Processing Engineer position. The candidate will be responsible for modem and waveform development, digital signal processing, analysis & simulation for wireless systems, and RF system design. This is not an entry-level role; it requires advanced education and experience in communications and signal processing. Only qualified applicants will be considered for this position. Duties/Responsibilities The following is a list of expected duties to be involved with the position. It is not fully inclusive, and additional ones may be assigned as determined by management: • Develop and implement algorithms for digital signal processing applications., • Design and optimize digital filters, signal transforms, and other signal processing techniques., • Analyze and interpret data to extract meaningful insights and develop actionable recommendations., • Collaborate with cross-functional teams to integrate signal processing solutions into hardware or software systems., • Conduct performance evaluation and optimization of signal processing algorithms on various platforms., • Participate in the design and development of real-time signal processing systems., • Troubleshoot and debug signal processing algorithms and systems to ensure optimal performance., • Document design specifications, implementation details, and testing procedures., • Provide technical guidance and support to other team members on signal processing-related issues., • Conduct research and feasibility studies to explore new signal processing techniques and applications., • Perform simulation and modeling of signal processing systems using specialized software tools., • Mentor junior-level engineering staff members.Required Specialized Skills/Knowledge, • Technical experience with:, • Digital communications and RF systems experience, including modem and link margin analysis, • Hardware and FPGA development experience (VHDL or Verilog), • Digital filter techniques, Fourier Analysis, and tracking loops, • RF circuit design (cascades, mixing, amplifiers, filtering, oscillators, etc.), • Nonlinear circuits, measurements, and simulation techniques, • Experience with relevant software tools, including:, • MATLAB/Simulink, plus DSP Systems Toolbox (required), • MathWorks HDL Coder, • Mentor Graphics ModelSim, • LabVIEW, • TI Code Composer Studio, • Xilinx Vivado and Intel Quartus Prime, • Experience using signal generators, network analyzers, spectrum analyzers, and logic analyzers, • Knowledge of common wireless standards and techniques, • Technical project leadership skills, • Strong verbal and written communication skillsEducation and Experience, • Ideal candidates will have a Ph.D. (or be in candidacy) in Communications and Signal Processing, • MS. in Digital Signal Processing (minimum requirement), • 5+ years of experience in digital signal processing design (or related academic research)Other Requirements, • Training and regular duties require a regular in-office presence. Hybrid/flexible scheduling is available based on business needs., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours., • Minimal travel may be required for client visits and tradeshows., • Please note that all offers for hire are contingent on passing e-verification and background and drug screenings. In addition, you must be able to work with ITAR and CUI data.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. The position is eligible for a variety of bonuses, including client referrals, employee referrals, publications, and extra effort. Relocation assistance of up to $15,000 may be available for well-qualified candidates. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job DescriptionDescription Challenging Bridge Projects. Grow your Career. Build the Future. Are you a skilled bridge engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Bridge Engineer to join our Western New York Transportation Department and help us deliver some of the largest and most complicated infrastructure projects in Upstate New York. Our Western New York Bridge team is expanding, and we’re excited to offer you the opportunity to be part of the largest bridge program in our team's history. With active projects in nearly every county across the region, you'll play a key role in shaping critical infrastructure. This unprecedented workload not only brings meaningful technical challenges to keep you engaged and learning, but also opens the door to unlimited career growth. If you're looking to make a real impact while advancing your professional journey, there's never been a better time to join us. In this role, you’ll support bridge engineering projects from initial planning and design through construction support. Working under the guidance of senior engineers, you’ll contribute to structural analyses, prepare design documents, and assist with field inspections. You’ll bring a strong foundation in civil or structural engineering, a willingness to learn, and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the most impactful infrastructure efforts in Upstate New York: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Bridge Design: Work on every aspect of bridge design projects, including inspection, structural calculations, geometry layout, plan development, and construction coordination., • Project Development: Assist in progressing bridge projects through the design process, including report writing, environmental permit coordination, and development of contract specifications., • Bachelor’s degree in Civil Engineering or a related field., • 0-5 years of experience in bridge design, • Proficiency in AutoCAD/Civil 3D and/or MicroStation/OpenRoads Estimated Salary Range: $73,424 - $104,624* Benefits: Comprehensive health, dental, and vision insurance, life and disability coverage, accident and critical illness insurance, flexible spending accounts, 401(k) plan with company match, generous paid time off (PTO), flexible/hybrid scheduling, tuition reimbursement, employee assistance program (EAP), wellness programs, parental leave, professional development opportunities, employee discounts, and referral program. For more detailed information, please visit C&S Comprehensive Benefits. WHO WE ARE: At C&S Companies, we believe that a great job is about more than just the work—it’s about the people, the culture, and the opportunity to grow. We foster a family-friendly, collaborative, and employee-focused workplace grounded in quality, integrity, trust, fun, and accountability. Belonging is a top priority: we are committed to cultivating and sustaining a safe, inclusive atmosphere where everyone feels valued, supported, and empowered to thrive. C&S is a national planning, design, and construction firm with more than 600 employees and growing. For over 50 years, we’ve delivered critical infrastructure services across aviation, transportation, civil/site infrastructure, planning, sustainability, construction and program management, energy, environmental, facilities, and architecture. We have offices throughout New York State and in California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Rochester, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Duties • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Maintain client relationships. Salary Range: $90,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester owns and operates the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. RED-Rochester is seeking a Utilities Engineer for Electrical Systems and Power Distribution. This role is an important position on the RED-Rochester team that provides stewardship and technical guidance for the operation, maintenance, improvement, and expansion of the Eastman Business Park microgrid in Rochester, New York. The Utilities Engineer shall be the senior technical resource for RED’s overall electrical generation and power distribution systems. Essential Duties and Responsibilities: • Lead in the development and maintain a long-range strategic master plan for the operations, maintenance, hardening, and future expansion of the Eastman Business Park electrical distribution system to meet new customer loads and increasing electrification of RED’s utility assets., • Function as the lead technical resource providing direction in the areas of medium voltage (600V to 34.5KV) distribution equipment, substations, transformers, switchgear, cable, motors and turbine generators., • Provide technical support in the area of low voltage (110V to 600V) distribution equipment, variable frequency drives, and motors., • Provide power systems analysis for load flow and voltage drop, short circuit studies, equipment protection, and coordination, and arc flash studies. Knowledgeable with SKM Power Tools for Windows. Provide power quality analysis as needed relating to harmonics and system disturbances., • Project Management and electrical engineer support for projects both RED originated and customer-driven. This includes oversight of contract project engineers and construction contractors., • Provide Engineering assistance for the day-to-day operations and maintenance of the RED-Rochester low and medium voltage systems., • Coordinate NYISO generator modelling and other NYISO technical requests for market participation as a Behind the Meter Net Generator., • Interface with the local utility to coordinate operation of and changes to the utility interconnect., • Provide Electrical Engineering assistance to all RED operating departments pertaining to building systems. Systems to include HVAC, reliable power, general lighting & power, IT cabling, cameras/security, fire alarms, UPS, etc., • Provide technical guidance to RED’s EHS group relating to electrical safety compliance with applicable NFPA standards.Education/Experience:, • Bachelor’s degree in Electrical Engineering, • Experience in, manufacturing/industrial sites, power generation, power distribution, utility interconnects, and/or business development preferred., • 7 to 10 years’ related experience in electrical engineering, utilities, construction and design of power plants, cogeneration, power distribution, and/or other multi-disciplinary, energy-intensive industrial processes.Qualifications, • Minimum 10 years’ experience in the engineering, construction and design of power plants, cogeneration and/or other multi-disciplinary, energy-intensive industrial processes, • Proficient in MS Office, • New York State PE License is expected for this position. Preferred Certifications/Licenses:, • New York State PE License is expected for this position. Skills/Competencies: • Project management experience in capital or capitalized maintenance projects., • Good communications skills, both verbal and written across the RED-Rochester technical support, operations and maintenance teams, • Ability to deal with outside engineers, contractors and vendors ., • Proficiency in Microsoft Office suite, including Excel and Teams., • Use of Bluebeam Revu, Navisworks, AutoDesk/AutoCAD and Maximo., • Familiarity with SKM Systems Analysis software for Power Systems and Arc Flash. Ability to self-perform modeling a plus., • Strong technical knowledge in the areas of Low (110V to 600V) and Medium (600V to 34.5KV) voltage systems, equipment and metering., • Ability to plan and see the “big picture”. Must be a “results-driven, self-starter” with the desire to bring creative solutions to a dynamic operating environment., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Dedication to highest levels of utility service reliability and customer service, • Ability to work scheduled and unscheduled overtime and respond to off-hour call-ins for emergency support. Work Environment: • Industrial and office environments., • Must work at times in dirty and noisy areas.

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for an RF Engineer to join our team to help us accelerate our product development initiatives. Location: This position is onsite in Syracuse, NY office, with the potential for hybrid arrangements. Responsibilities: • Derive and document RF system requirements working collaboratively with multiple technical disciplines, • Develop innovative RF subsystem and system architectures, • Simulate, model, design, select and characterize components, • Design, implement, test, and integrate RF circuit cards and subsystems for use in our cutting-edge communications, radar, and other sensor systems, • Participate in cross-functional technical design reviews, • Perform and support integration and test activities and events, • Support or perform project planning, execution, and oversight, • A desire to lead development projects and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected., • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Bachelor's degree in Electrical Engineering, or a related technical field., • 5+ years of professional experience, • Demonstrated skills in software simulation platforms such as Ansys HFSS, Matlab, or Python, • Experience and interest in one or more of the following areas:, • Antennas and Phased Arrays, • Receivers, • Exciters, • Simulation, • Anechoic Chamber Measurements, • Schematic Capture, • Advanced degree in Electrical Engineering, or a related technical field. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $109,000 to $136,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Associate Automation Engineer is a key member of the Digital Plant team that will support manufacturing Process Control Systems and Building Automation Systems at the Syracuse, NY manufacturing facility. The primary role of the Associate Engineer will be to design, implement and maintain systems that are controlled by Programmable Logic Controllers (PLCs) that support manufacturing and the site buildings. This role will require computer system validation work associated with commissioning and qualification of systems end to end from specification documents through IQ, OQ PQ. The role will work directly with manufacturing process experts and facility engineers to determine end user requirements, develop robust strategies and solutions, draft specification documents, perform testing, commissioning and qualification activities and work safely and efficiently in a high compliance environment. Training will be provided as necessary to enable skills in specific applications used to support this role. Duties & Responsibilities • Primary function will be to support the design, build, test, and maintenance of the various Allen-Bradley PLC's and Rockwell applications associated with process control and building automation systems for the site., • Support the design and build of vendor Rockwell PLC/ BAS roadmaps to align with site strategy., • Works with various PLC/BAS Vendors/ Integration specialists to ensure a safe and successful implementation effort is achieved., • Investigate the root cause of Digital Plant PLC/BAS problems and propose solution to prevent recurrence., • Draft and maintain living and project documentation for managed systems including design specifications, qualification documents and knowledge base articles., • Conduct all job activities in accordance with cGMP and EHS requirements., • Provide training of automated solutions with Automation and Instrumentation staff to ensure understanding how the PLC/BAS functions to assist with troubleshooting during off hours., • Research and propose new PLC/BAS technologies to ensure cost reduction and increased reliability., • Advanced knowledge of engineering or sciences generally attained through studies resulting in a B.S. in, engineering, science, biochemistry or related discipline or its equivalent is highly desired with 3+ years experience with PLC/BAS design/ troubleshooting/ implementation OR 7+ years experience with PLC/BAS design/ troubleshooting/ implementation, • Knowledge of PLC/BAS engineering relating to Rockwell Allen Bradley products., • Knowledge of products and technologies provided by major automation vendors, including but not limited to: Rockwell Allen Bradley, • Experience in system and hardware refreshes from legacy to current technologies for PLC/BAS Systems, • Ability to develop and execute innovative PLC/BAS solutions for continuous improvement., • Quote/ Proposal review experience to ensure adequate design meets site budget commitments and project deliverables, • Experience working with PID drawings, electrical layout and wiring diagrams, Industry Design Standards and equipment loop drawings., • Technical problem solving and analysis skills as well as good communications skills (verbal and written)., • Ability to effectively lead or participate in multi-disciplined team environment to achieve goals., • Knowledge and understanding of applicable regulatory requirements. This position is an office-based position which requires appropriate levels of personal protective equipment (PPE) when field work is required. Frequent repeated motions such as keyboarding are required. Work Environment This position is based indoors, and you will primarily be working with others, but also independently and alone at times. This position is a team & project-based position that will require occasional shift work, weekends, and holidays. This position offers a hybrid work schedule, with the flexibility to work from home up to 50% of the time. Travel The position may require up to 5% of travel. Target Bonus 8% Work Location: East Syracuse, NY New York Pay Range$60,000—$88,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy Infrastructure team in our Syracuse, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 8-10 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Preferred: experience designing geothermal or district energy systems, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Geotechnical Engineer – Nationwide Opportunities Earth Systems, LLC – part of EnviroTech Holdings (Earth Systems, EnviroTrac, EnviroTactics, Spangler Environmental, Bio-Tech Consulting, Earth Systems Response & Restoration) Looking for a career where your expertise actually makes an impact? At Earth Systems, we’re not your typical environmental consulting firm. With 30+ locations nationwide, our teams of scientists and engineers tackle geotechnical and environmental challenges head-on—combining technical know-how with practical solutions that matter. Position Overview We’re looking for a Geotechnical Engineer who knows the consulting world—someone who’s worked with firms providing Geology, Environmental Science, and Environmental Engineering services. If you thrive in a fast-moving, multidisciplinary environment, this role will give you the chance to lead from the field and solve real-world problems head-on. You’ll take charge of project leadership across multiple regions, using your technical expertise and practical mindset to deliver results that matter. The ideal candidate will hold a PE license and bring proven experience in the environmental consulting industry, with the confidence to step into a leadership role and the drive to make an impact. What You’ll Do * Lead geotechnical investigations and in-situ testing * Deliver foundation design, slope stability, and settlement analysis recommendations * Write and present clear, actionable reports for clients * Scope, budget, and manage projects with support from a collaborative team * Oversee fieldwork and lab testing to ensure QA/QC * Partner with clients, regulators, and project teams to keep work on track * Mentor junior staff and share your expertise What We’re Looking For * Bachelor’s degree in Geotechnical Engineering, Geology, Environmental Engineering, or related field (Master’s a plus) * 5+ years of experience in geotechnical or applied environmental consulting * PE license or EIT with the ability to obtain licensure in the state of hire within 12 months * Proficiency in AutoCAD, gINT, GeoStudio, or similar software * Strong writing skills and experience preparing technical reports * Willingness to travel to project sites within your region What We Offer * Competitive salary and full benefits (medical, dental, vision, life) * 401(k) with company match * PTO, holidays, and flexible scheduling * Phone reimbursement * Hybrid work (office/field/home mix) * Paid training, certifications, and continuing education * A growth-focused, collaborative culture where your voice matters At Earth Systems, you’ll have a seat at the table from day one—and the chance to shape meaningful projects that drive real change. Ready to take the next step? Apply now!

Job Description RF Field Engineer (Entry Level) – UPNY C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. Description: We are currently seeking an entry level Radio Frequency Field Engineer to join our team in our Syracuse NY office. This position is for full time employment. The candidate will perform site surveys, system designs, gathering existing data and coverage as well as general site information. System troubleshooting, project management, activations, maintenance tickets, optimization, testing as well as some construction will all be a part of the job duties. The ideal candidate should be highly motivated and have the ability to work in a fast paced environment. Applicants must possess strong technical aptitude and be comfortable working in high pressure situations. The candidate will be interacting with customers and co-workers on a daily basis, and must be able to provide timely and detailed updates. Field Engineer will be exposed to various RF applications and should understand the best practices for any given situation. This position will require the individual to be in the field approximately 80% of the time. The candidate must be willing to travel with occasional overnight stays. Responsibilities: • Perform site surveys and in-depth site walkthroughs., • Troubleshoot and repair systems for optimal performance., • Project managing the construction and installation of Distributed Antenna Systems, keeping to all building codes and customer construction requests., • Perform system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment., • Design complete and accurate Distributed Antenna Systems using iBwave software., • Take lead on system commissioning, integrations, and activations., • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers., • Multi-task projects on a day-to-day basis., • Bachelor of Science in Electrical or Mechanical Engineering from an ABET - accredited academic institution., • Understanding of engineering design concepts, testing procedures, and possessing the ability to adapt to new procedures, equipment, and technologies., • Experience with basic construction tools (drills, screwdrivers etc.) and construction practices., • Ability to multitask and keep projects moving through different phases of their lifecycle by staying organized and communicating., • Ability to receive and give direction., • Strong oral and written communication skills., • Ability to work with a team diverse in skill, experience and knowledge., • Experience with 2D modeling programs such as AutoCad or Draftsight is preferred but not required., • Proficient in basic computer applications. (Outlook, Word, Excel, etc.)

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy & Commissioning team. LaBella’s Energy & Commissioning team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary range: $80,000.00 - $100,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for a Computer / Electrical Engineer for Summer 2026. As an intern you will gain hands-on experience with our custom hardware and software products. You can expect to gain meaningful technical experience while helping us accelerate our product development, production, and deployment of our state-of-the-art sensor network. Location: This position is onsite in the Syracuse, NY office. As a Computer/Electrical Engineering Intern, you will… • Evaluate next generation hardware, analyze results and make recommendations to the design team., • Collaborate across engineering disciplines to develop and test advanced sensor products., • Work in a motivated, cross-disciplinary team passionate about solving challenging problems and delivering results., • Receive mentorship, guidance, and constructive feedback from experienced engineers. Responsibilities: • Support the design team by performing design verification testing of our next generation prototype hardware., • Make enhancements to software used to characterize and calibrate custom hardware components and complex sensor systems., • Work in a lab environment using digital scopes, signal generators, network analyzers, and temperature chambers., • Interface with lab equipment to automate testing., • Perform analysis of data collection results and make recommendations to the design team., • Support next generation sensor integration, test, and design verification activities including field test events centered around evaluation of drone target detection and tracking performance. Required Qualifications: • Enrolled in an accredited degree program majoring in Computer Engineering or Electrical Engineering., • Completed Sophomore year or greater by Summer 2026., • A minimum grade point average of 3.4. Recent transcript is required with application (unofficial transcripts are acceptable), • Ability to work in a fast-paced environment and overcome technical challenges through teamwork and collaboration., • Strong desire to learn and great communication skills., • Some experience working in one or more of the following languages: Python, MATLAB, C, C++, or VHDL., • Must be a U.S. Citizen, • Ability to travel up to 10% Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $23.00 to $27.00 an hour. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. #LI-DNI

Job DescriptionDescription: Precast Engineer - Civil/Structural Join Our Team as a Precast Engineer – Shape the Future of Concrete Design & Innovation! Fisher Associates is hiring a full-time Precast Engineer to design and engineer high-quality precast concrete components for a variety of civil and structural engineering projects. You’ll ensure every element meets structural codes, safety standards, and project specs—delivering safe, reliable, and cost-effective solutions. Collaborate with a skilled, supportive team and grow your engineering career in a flexible, impact-driven environment. Apply now and engineer the future with us! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation., • Support Project Managers and Designers throughout the project lifecycle. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0 - 5 years minimum of transportation/structural engineering experience, • Precast concrete design engineering course or design experience preferred, • EIT or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy & Commissioning team. LaBella’s Energy & Commissioning team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • Ensure compliance with applicable codes, standards, and utility requirements Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are currently hiring an Electrical Engineer in our Building Engineering Division – Energy Infrastructure team in our Buffalo, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses and design. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Electrical Engineer will work with our team in a lead role on a variety of decarbonization/electrification/renewable energy projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Design building electrical systems, • Design photovoltaic, battery storage systems, and grid interconnection, • Field investigations to document existing conditions, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 2-4 years of relevant experience, • Bachelor’s degree in Electrical Engineering is preferred, • Well-rounded experience in building electrical system and/or distributed energy system design, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $70,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionJob ProfileJob Title: Technical Engineer IV (Splunk)Location: Buffalo, NYHire Type: Contingent Pay Range: $53.20 – $88.65/hourWork Model: HybridRecruiter Contact: Brian Fesmire () No C2C,C2H, 1099 or Visa Sponsorship Available Nature & Scope:Positional OverviewAre you a seasoned Splunk Technical Engineer looking for an exciting new challenge? Join our client’s dynamic team where innovation and excellence are at the core of everything we do. They offer a collaborative and stimulating environment where your expertise will drive cutting-edge projects and shape the future of technology. If you're passionate about pushing the boundaries of technology and want to make a significant impact, we want to hear from you. Apply now! Role & Responsibility:Tasks That Will Lead to Your Success • Lead the design and architecture of the bank's SIEM infrastructure, ensuring its effectiveness, scalability, and alignment with industry standards and regulatory requirements, • Implement, configure, and optimize SIEM solutions to collect, correlate, and analyze security event data from various sources, such as network devices, servers, applications, and endpoints, • Develop and maintain SIEM use cases, correlation rules, alerts, and reports to identify and prioritize security incidents and potential threats, • Collaborate with other Cybersecurity and Security Engineering teams to investigate and resolve complex security incidents, conduct root cause analysis and recommending remediation actions, • Stay up to date with the latest security threats, vulnerabilities, and industry trends, and proactively assess their potential impact on the bank's SIEM infrastructure, • Lead SIEM-related projects, including system upgrades, enhancements, and integration with other security tools and technologies, • Provide guidance and mentorship to junior SIEM engineers, promoting knowledge sharing and skill development within the team, • Collaborate with internal stakeholders, such as IT operations, compliance, and risk management, to ensure the Bank's security posture is in line with industry standards and regulatory requirements, • Participate in incident response exercises, tabletop simulations, and other security-related drills to enhance the bank's incident response capabilities, • Responsibilities may include infrastructure architecture and design, research and development of new or expanded systems, creation of technology standards and policies, thorough analysis of user requirements and operational constraints, unit test and system integration, and user acceptance testing, • Regularly and independently interact with business partners of varying associate and management levels to ensure clarity of the problem/opportunity and elicit business requirementsSkills & Experience:Qualifications That Will Help You Thrive, • Minimum Bachelor’s degree in Computer Science or Computer Engineering., • Minimum 8 years advanced experience in a technical engineering position involving infrastructure design technologies, data management and interchange, system design and/or development for complex applications., • 8+ years of experience engineering, architecting and implementing SIEM technologies with Splunk (architecting the environment, parsing data logs and onboarding applications), • Splunk Enterprise Certified Architect or Splunk Core Certified Consultant required, • Advanced technical, analytical, troubleshooting and problem-solving skills., • Demonstrated ability to develop alternative solutions to complex problems and recommend the best solution to the technology business, and project teams.

Job Description Overview Are you ready to join a growing team? CTG is seeking to fill a Senior Technical Engineer opening for our client. Location: Buffalo, NY Duration: 3 months with high potential for extension Overview: Provides high-level technical solutions, designs, documentation, and guidance for the development and deployment of new or existing systems. Primary Responsibilities: * Lead design, development, and implementation of technical solutions. * Perform infrastructure architecture, system analysis, and testing. * Collaborate with business partners to gather requirements and estimate project efforts. * Coordinate vendor interactions and manage vendor resources. * Mentor less experienced staff and review their work. * Maintain expert-level knowledge of applications, environments, and vendor products. * Assist in budgeting and ensure compliance with risk, regulatory, and internal controls. * Complete other related duties as assigned. Scope of Responsibilities: * Provide technical guidance and support organizational standards, best practices, and compliance requirements. * Represent technical expertise in internal and client/vendor interactions. Supervisory/Managerial Responsibilities: * None Education and Experience Required: * 12+ years combined education and/or experience in systems design, management, or architecture. * Strong understanding of system development, infrastructure lifecycle, IT Service Management, and vendor best practices. * Bachelor’s degree in Computer Science or Computer Engineering. * 12+ years advanced experience in infrastructure design, system development, or complex applications. * Advanced skills in analysis, troubleshooting, problem solving, and technical execution. * Knowledge of server/client and virtual technologies. * Experience with project estimation, planning, and budgets. * Strong communication, facilitation, and influencing skills. * Ability to work independently and collaboratively in a fast-paced environment. • Calypso Trading Platform/ Fin Tech (Must Have), • Jira CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Krista Eckard at . Kindly forward this to any other interested parties. Thank you! The expected base salary for this position ranges from $74.35 to $123.90. Salary offers are based on relevant skills, training, experience, education, market factors, and—where applicable—licensure or certifications. In addition to salary, a competitive benefits package is offered.

Job Description Are you passionate about healthcare building engineering systems? We are seeking a Senior Electrical Engineer with a strong background in healthcare building projects to join our Buffalo, NY Office. In this role, you will collaborate with regional leaders and engineering teams to develop concepts, strategies, designs, drawings, specifications, and reports from project inception through construction. You must be able to work independently and as part of multi-discipline teams to drive successful client outcomes in the built environment. This is a unique opportunity to lead and build a team, playing a key role in shaping the future of our healthcare engineering sector. At LaBella, our architects and engineers are problem-solvers, innovators, and change-makers, committed to addressing local and regional challenges, preserving natural resources, and planning for a sustainable future. Duties may include: Project Development & Client Engagement • Scope projects and develop proposals., • Build and maintain relationships with existing and prospective clients., • Function as the lead electrical engineer on multi-discipline projects from proposal through construction., • Serve as a project manager for building engineering-led projects. Electrical Engineering & Design • Develop electrical designs including single-line diagrams, electrical room layouts, panel sizing, lighting, and building systems., • Perform load calculations for generators, transformers, switchgear, MCCs, panel boards, VFDs, feeders, and branch circuits., • Prepare electrical design drawings, specifications, and reports., • Research and present coordinated design solutions., • Conduct building condition assessments and generate reports., • Ensure compliance with national, state, and local regulations, including FGI guidelines, DOH requirements, and CON submissions. Team Collaboration & Leadership • Work closely with mechanical, civil, structural engineers, and architects., • Mentor and train junior engineers., • Delegate and oversee project tasks to ensure successful completion., • Engage with owners, contractors, permitting authorities, and industry organizations. Technical Expertise & Innovation • Serve as Engineer-of-Record and internal technical expert on assigned projects., • Maintain up-to-date knowledge of industry technologies, trends, and best practices., • Passion for healthcare building systems and recognized expertise in the field., • Bachelor’s or Associate’s degree in Electrical Engineering, Engineering Technology, or a related field., • PE license (NY or OH) strongly preferred., • Minimum 10 years of experience in an A/E consulting firm., • Expertise in power distribution, lighting, fire alarm, security systems, and telecommunications design., • Experience with AutoCAD and Revit is a plus., • Familiarity with electrical modeling programs (e.g., AGi32 for lighting, SKM for power analysis)., • Understanding of Arc-Flash Evaluation and electrical safety codes., • Strong writing, organizational, and communication skills., • Attention to detail—because in this role, every detail matters!, • Ability to manage multiple projects simultaneously. Salary Range: $125,000 - $175,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Why Join Us? • Opportunity to lead and grow a team in a respected firm., • Collaborative, mission-driven culture focused on innovation and sustainability., • Work on impactful projects that shape healthcare environments. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionJob Title: Technical Engineer IV (OpenShift Platform Engineer)Location: RemoteHire Type: ContingentWork Model: RemoteHourly: $53.20 - $88.65/hourRecruiter: Brian Fesmire - No C2C, C2H, 1099 or Visa Sponsorship Available Nature & Scope:Positional OverviewAre you a seasoned OpenShift Technical Engineer looking for an exciting new challenge? We are seeking an experienced OpenShift/Kubernetes Engineer to join a team managing and maintaining the container platform. This person should bring expert knowledge of the OpenShift/Kubernetes platform and best practices for cluster deployments to the team. A large part of this role will be playing with the latest and greatest technologies and making recommendations on how to take advantage of them. An ideal candidate should have excellent technical credentials, experience in containers, networking, storage, compute, cloud infrastructure design and implementation, and excellent communication skills. If you're passionate about pushing the boundaries of technology and want to make a significant impact, we want to hear from you. Apply now!Role & Responsibility:Tasks That Will Lead To Your Success • Automate the deployment, configuration, and maintenance of the bank’s OpenShift clusters through the creation and deployment of custom pipelines, • Participate in the review of new cluster configurations and pipelines to ensure they achieve their intended result in a non-disruptive manner, • Identify, recommend, and implement upgrades and enhancements required to maintain system functionality and optimal performance, • Lead efforts in infrastructure automation and continuous deployment utilizing a CI/CD pipeline in a private virtualized environment, • Document any new services or infrastructure being deployed as well as ensuring that current documentation remains accurate and follows best practices, • Work closely with Technology management, senior Engineers, and support teams on a regular basis to implement and manage the design, development, and execution of technical solutions that meet or exceed current and future needs of the organization, • Responsibilities may include infrastructure architecture and design, research, and development of new or expanded systems, creation of technology standards and policies, thorough analysis of user requirements and operational constraints, unit test and system integration, and user acceptance testing, • Provide mentorship and coaching to engineers, technicians, and integrators, • Maintain a strong aptitude and working knowledge of applications, systems, development environments, and vendor technologies in use, • Coordinate vendor interactions and support tickets when required, • Follow and promote use of industry best practices, standards, and proceduresSkills & Experience:Qualifications That Will Help You Thrive, • Bachelor’s Degree in Computer Science, Computer Engineering, Managing Information Systems, or other related field of study, • 8 years’ professional experience in a technical engineering position involving infrastructure design technologies, data management and interchange, system design and/or development for complex applications, • Ability to translate complex business and functional requirements into structured, high quality implementations using any variety of industry standard approaches, • Excellent written and verbal communication skills, • Expert knowledge and experience with container technologies using OpenShift/Kubernetes and Podman/Docker (build, configure, support), • In-depth knowledge of Linux systems and how to configure them, • Ability to write sustainable scripts using a language such as Python, Perl, or Bash, • Experience with automation and creating Ansible playbooks and/or Terraform HCL, • Advanced knowledge of Azure services, specifically Azure Kubernetes Service (AKS) and Azure Red Hat OpenShift (ARO), • In-depth experience using GitOps (ArgoCD) to configure and maintain Kubernetes clusters at scale

Job Description We are currently hiring a Structural Engineer to join our Building Engineering Division in our Buffalo, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Structural Discipline provides structural engineering services with emphasis on new design, repair, and rehabilitation of constructed works, as well as investigation and performance evaluation. This position will work closely under the supervision of a Senior Structural Engineer to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams Candidates will work on an interesting variety of project types including K-12 and higher education, municipal, health care, large commercial, residential and other unique projects. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Perform complex design calculations for analysis and design of new and existing structural systems., • Prepare documents and reports from concept design through advanced technical design documentation., • Perform field investigations and document findings., • Work closely with other engineering and architectural disciplines., • Review shop drawings, respond to RFI’s and perform field observations during CA phase. Salary Range: $65,000 - $100,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor of Science degree in Civil or Structural Engineering is required. Coursework in building systems engineering required., • Master of Science degree in Structural Engineering is preferred., • 3 years minimum experience with concrete, steel, masonry, and/or wood design is required., • Working knowledge of AutoCAD, Revit and structural engineering design software (RISA, SAP, and/or TSD) is required., • E.I.T. accreditation preferred., • Excellent verbal and written communication skills. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Job description This candidate must have the ability to understand mechanical concepts and processes easily, as well as be proficient with the use of equipment and tools to diagnose and repair equipment. This candidate will also be helping create Bills of Materials (BOM's) and Routings for our new ERP system Education/Experience: • Bachelor of Science in Engineering or related background, • 1-2 years of industrial experience as a engineer is preferred but we will accept new graduates, • Proficient with a 3D modeling software, prefer SolidWorks experience, • Work with a team of engineers and other personnel to develop and maintain mechanical and robotic systems to improve the manufacturing process in our industrial manufacturing plant., • Propose and implement cost-reduction and runtime improvements., • Support production team with troubleshooting and repair of production equipment., • Design/produce effective solutions for needed fixtures and tools., • Participate in training of operators on new machinery and control systems., • Propose new technologies and machinery to improve manufacturing abilities and efficiency., • Provide production and sales support as needed., • Knowledge of PLC’s, automation, or robotics is a plus., • Knowledge of lean manufacturing, cell concept, and value stream mapping also a plus., • Welding experience is a plus, • Must possess excellent communication skills., • Must have the ability to write routine correspondence and to speak effectively to employees and customers., • Must have the ability to deal effectively and interact well with the customers and employees., • Must be able to lift up to fifty (50) pounds., • Must be able to bend, squat, and stretch (Repetitive motion), • Must be able to climb ladder and work in high areas, • Must be fit tested for respirator use This position comes with a competitive pay structure with bonus program and an excellent benefits package which includes Company sponsored healthcare, dental, Company paid Life and Accidental death insurance, paid vacation, and 401(k) plan. Company DescriptionUnicell is a creative, resourceful manufacturer with a strong commitment to employees and customers. Innovative and flexible, we have created a culture of success that’s shared by every individual. We are a multi-cultural/multilingual company that embraces diversity and inclusion from the assembly floor to the executive branch With headquarters in Toronto, Canada and Buffalo, New York, we also have locations in Rochester and Albany to complete projects for our local and national customers. Our major products are truck bodies, and we build an almost unlimited number of custom variations to these basic products. We are also a supplier of truck equipment manufactured by other top companies.Unicell is a creative, resourceful manufacturer with a strong commitment to employees and customers. \n\nInnovative and flexible, we have created a culture of success that’s shared by every individual. We are a multi-cultural/multilingual company that embraces diversity and inclusion from the assembly floor to the executive branch\n\nWith headquarters in Toronto, Canada and Buffalo, New York, we also have locations in Rochester and Albany to complete projects for our local and national customers. Our major products are truck bodies, and we build an almost unlimited number of custom variations to these basic products. We are also a supplier of truck equipment manufactured by other top companies.

Job DescriptionDescription: About WeTheHobby WeTheHobby is a fast-growing sports entertainment company bringing fans together through live-streamed breaks, eCommerce, and real-time community experiences. Headquartered in Rochester, NY, we’re building platforms that connect collectors and fans worldwide. We value creativity, innovation, and collaboration—and we’re looking for builders who want to make an impact in one of the fastest-growing corners of sports entertainment. The Role We’re seeking a Senior Backend Engineer to design, build, and scale the systems that power our customer experience. In this role, you’ll focus primarily on coding and delivering high-quality features, while also mentoring teammates and contributing to architectural discussions that shape our platforms. What You’ll Do • Build & Scale Systems – Design, develop, and maintain backend services and APIs that support eCommerce, payments, and live streaming, • Hands-On Development – Spend the majority of your time coding, writing tests, and shipping features, • Mentor Teammates – Guide junior engineers on coding best practices, clean design, and maintainability, • Collaborate – Work with product, front-end engineers, and designers to deliver high-quality features, • Contribute to Architecture – Participate in architectural discussions and propose technical solutions, • Ensure Quality & Security – Champion testable, secure, and scalable code through best practices and code reviews, • Stay Current – Explore new tools and technologies to help improve performance, scalability, and developer productivity Requirements: What We’re Looking For Must-Haves • 5+ years of backend engineering experience, preferably with .NET, • Experience designing and implementing APIs and scalable systems, • Strong database skills (SQL and/or NoSQL), • Hands-on experience with AWS (or another major cloud platform), • Excellent problem-solving and collaboration skills Nice-to-Haves • Experience with GraphQL, SignalR, or event-driven systems, • Familiarity with front-end frameworks (React.js or similar) for better collaboration, • Background in eCommerce, payments, or streaming technologies, • Impact: Help design and build the backbone of our platform in a high-growth environment, • Ownership: Spend most of your time coding while also mentoring teammates and contributing to architecture, • Growth: Opportunity to work with cutting-edge technologies and expand your technical expertise, • Salary: $130,000 – $150,000 depending on experience and skills, • Benefits package including health, dental, vision, PTO, and more

Job Description PROCESS ENGINEER Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. JOB SUMMARY Under the direct supervision of the Engineering Manager, the Process Engineer is responsible for performing a variety of manufacturing processes and engineering functions. ESSENTIAL FUNCTIONS: • Write manufacturing processes and enter in Epicor software. Work with the engineering group on machine processes and tooling., • Interface with department supervisors and machinists on a regular basis., • Utilize customer supplied CAD files when available to process manufacturing plan., • Utilize CAD to create work holding and fixturing layouts., • Interface with CNC programmers., • Notify Tool Crib of upcoming jobs., • Develop queuing system for kits ready to set up., • Verify tooling is available for jobs and ensure back-ups are available., • Coordinate all projects as they progress through the shop., • Monitor profitability as jobs are running., • Expedite any materials and components for jobs to ensure jobs stay on schedule., • Complete routing for customer jobs., • Work with engineering group and manufacturing to develop tooling and fixturing concepts for all new work., • Update all processes during and after production., • Work with manufacturing to ensure processes are being followed, and to incorporate time saving methods when suggested., • Investigate and provide disposition on discrepant/quality issues for jobs assigned., • Review assigned jobs with department manager at hand-off and when ready to move to the floor., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Excellent written and oral communication skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Familiarity with all aspects of manufacturing including material specifications, turning, milling, heat treat, welding, plating and painting., • Attention to detail., • Customer focus., • Analytical and reasoning skills., • Proficiency with 3-D modeling software packages, Autodesk Inventor., • High School Diploma or equivalent required, • College degree preferred, but not required, • 10 years of machining or manufacturing experience required, • Vacation, • Sick Days, • Paid Holidays, • Health Insurance, one plan is 100% employer paid!, • Dental Insurance, • Vision Insurance, • Life Insurance, also 100% employer paid!, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $29.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job Description We are seeking an experienced test engineer or electrician to join the QE MV Services team. The successful candidate will be responsible for commissioning, testing, and troubleshooting of medium voltage reclosers and protection and control systems, including SEL relays and other communication devices. They will also be responsible for acceptance and maintenance testing of MV cable, overhead equipment, pad-mounted transformers, and MV/LV switchgear. This role includes significant travel across the northeast with occasional national travel. Essential Duties · Perform acceptance testing and commissioning of reclosers, and protection and control systems in accordance with NETA/NICET standards · Perform functional testing, including protection and control schemes, on medium voltage systems including interconnection equipment specifically for PV/BESS systems · Perform acceptance and maintenance testing of variety of equipment from low voltage switchboard to point of interconnection. · Ensure that all equipment is installed and commissioned in accordance with manufacturer's specifications and industry standards · Perform pre-testing and witness testing of PV/BESS systems with AHJ · Troubleshoot and repair issues arising during commissioning · Prepare and review commissioning documentation, including test procedures and as-built drawings · Provide technical support to other field personnel during installation and commissioning · Communicate effectively with project managers, clients, site owners and other stakeholders · Stay current on industry developments and new technologies in acceptance and maintenance testing. Education & Certification Required: · Journeyman license or Associates/Bachelor's degree in Electrical Power Engineering or equivalent electrical experience in a related field. Experience Required: · Medium voltage experience should be related to protection and control schemes with level of expertise in SEL relays · Experience interpreting wiring diagrams to prepare relay logic and protection schemes. · Experience performing testing of transformers, reclosers, primary meters, and SEL relays · Strong problem-solving and analytical skills · Excellent verbal and written communication skills · Must be able to work independently and in a team environment · Must be able to work in a fast-paced, deadline-driven environment Specialized or Technical Knowledge Licenses, Certifications Preferred: · NICET Electrical Power Testing certifications · Thermography certifications (Level 1) · IT/networking skills: familiarity with RS485, Modbus, tcp/ip, etc. · OSHA 30 Certification · Completion of NFPA 70E courses · CPR/First Aid Functional Knowledge: · Knowledge of National Electrical Code and standard design/construction practices · Clear understanding of OSHA safe workplace practices and procedures · Ability to read and understand electrical single-line and three-line diagrams as well as other construction/DAS/design drawings or permitting documentation Company/Industry Related Knowledge: · Electric and related utilities and utility maintenance · Solar energy/BESS installation, maintenance, and optimization Physical Requirements: · Ability to lift up to 50 pounds regularly · Ability to move safely over uneven terrain · Ability to sit or drive for prolonged periods · Ability to safely climb ladders while carrying 50 pounds · Ability to work in extreme weather QE Solar offers incredible benefits! We enjoy: · 100% paid employee premium on health benefits; additional dependents at low costs and great plans for Health, Dental, Vision, FSA or HSA · Wellbeing and Employee Assistance · Perks at Work Marketplace for discounts on gym memberships, classes, tech, vacations, tickets, and more · Family Building and Adoption Assistance Programs · Learning & Development Opportunities · Discounted Life & Disability Insurance Workplace Type: On-site Salary Range: $45.00-$50.00 Per Hour Employment Type: Full-time Location: Syracuse, NY, USA Statement to all Third-Party Agencies and Similar Organizations: QE Solar accepts resumes only from contracted recruiting agencies with formal service agreements. Please do not send unsolicited resumes or outreach emails to our QE Solar employees, hiring managers, or team members without expressed consent or contract for services. QE Solar is not responsible for any fees or charges associated with unsolicited resumes or services.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a team-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Lead Projects. Mentor Talent. Build the Future. Are you a skilled transportation engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Highway Department and take a leading role in the design and execution of critical transportation projects across New York State. In this role, you’ll manage projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in highway design modeling and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in leading and expanding our premier transportation practice in Western New York. We’re already one of the region’s largest providers of transportation services —working on local projects in every county and major city in the Buffalo area. We also are completing significant projects with NYSDOT, the NYS Thruway Authority and GBNRTC. No other firm matches our regional presence or the scale of opportunity we offer our team. With this momentum driving rapid growth, we’re looking for a leader ready to make an impact. In this role, you’ll have the chance to shape the future of our department, influence major infrastructure projects, and grow your career with clear pathways for advancement. You’ll be supported by a collaborative team, high visibility, and the resources to take your work — and your career — to the next level. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s degree in Civil Engineering or a related field., • Licensed Professional Engineer (PE) in New York State, • Minimum 8 years of experience in transportation design, with a strong focus on NYSDOT/Federal Aid projects, • Proficiency in MicroStation/OpenRoads and/or AutoCAD/Civil 3D., • Estimated Salary Range: $97,760 - $120,640/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: At C&S Companies, we believe that a great job is about more than just the work—it’s about the people, the culture, and the opportunity to grow. We foster a family-friendly, collaborative, and employee-focused workplace grounded in quality, integrity, trust, fun, and accountability. Belonging is a top priority: we are committed to cultivating and sustaining a safe, inclusive atmosphere where everyone feels valued, supported, and empowered to thrive. C&S is a national planning, design, and construction firm with more than 600 employees and growing. For over 50 years, we’ve delivered critical infrastructure services across aviation, transportation, civil/site infrastructure, planning, sustainability, construction and program management, energy, environmental, facilities, and architecture. We have offices throughout New York State and in California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. job purpose: The Engineering Technician for filler is a crucial role within the Engineering Department responsible for ownership of the reliability, improvement and operational expertise across filler & packaging equipment in the Webster facility. They will provide technical solutions and expertise to Operations and Maintenance, to build out and improve the processes and routines across filler & packaging equipment. They will manage and oversee overhaul maintenance, design changes, and standard creation while assisting the team responsible for operational reliability, top loss improvements, and capital projects. This individual will plan, direct, and coordinate team activities including all projects with necessary vendors and in-house resources. responsibilities: • Acts as a subject matter expert capable of defining operational standards and maintenance practices for filler & packaging equipment., • Optimize machine performance and implement corrective, preventive and predictive actions to minimize downtime., • Enhance operational efficiency by developing and implementing process improvements, leading reliability routines to eliminate machine issues and create/maintain comprehensive documentation (SOPs, PM guidelines, etc.)., • Effectively communicates and collaborates with diverse teams (operators, technicians, engineers, vendors) to troubleshoot issues, lead & implement projects, and ensure seamless production flow., • Takes ownership of filler & packaging equipment's OEE, lifecycle, tracking parts, managing inventory, executing preventive maintenance, and leading equipment rebuilds/upgrades to maximize performance., • Leverages data analysis to monitor equipment performance, identify root causes of failures, and implement data-driven improvements to optimize efficiency and quality., • Fosters a culture of continuous improvement, proactively identifying and implementing innovative solutions to enhance processes, reduce waste, and drive overall operational excellence. skills/qualifications required: • Preferred minimum of 4 years' experience in Consumer Packaging Goods & packaging equipment., • Exhibits a strong mechanical aptitude, proficient in troubleshooting 90%+ of technical issues., • Ability to update P&ID's, mechanical/electrical prints., • Strong interpersonal and communication skills and the ability to work effectively with a wide range of constituencies in a diverse community., • Ability to train staff, including organizing, prioritizing, and scheduling work assignments., • Ability to analyze and assess training and development needs., • Skilled in BDA and RCA initiatives with the ability to lead those initiatives., • Able to understand and utilize engineering drawings, operating manuals, and blueprints to conduct business., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment., • Aseptic/Dairy experience preferred., • Knowledge of USDA, State, Federal regulations for a dairy manufacturing facility a plus working conditions and physical requirements: • Ability to lift a minimum of 40 lbs. on an occasional basis, • Ability to stand for extended period, • Climb ladders and work at elevations of 75 feet. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety, • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas, • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company, • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system, • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system, • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected, • In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required position location: Webster, NY reports to: Engineering & Reliability Manager travel requirements: 50% to begin than <10% exempt/nonexempt: non-exempt base pay range: $36-$39 fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job DescriptionJoin Our Team: About DDS Engineering and Surveying, LLP (DDSE): DDSE is an experienced and highly qualified natural gas/civil engineering, permitting and survey firm that has been performing consulting engineering and construction services in the natural gas industry for many years. We currently perform these engineering services related to natural gas transmission, distribution main design, station design (M&R, gate stations, and regulator stations) and customer services (residential and commercial) for a variety of natural gas customers throughout the Northeast. Our dynamic team is comprised of experienced natural gas engineers, civil and mechanical engineers, surveyors, gas construction personnel as well as in-house staff expertise in the areas of legal, compliance, and safety. The Project Manager role within the Facilities and Complex Projects Group of our Utility Engineering Division will lead a high-priority project under the supervision of a Senior Project Manager. This position will serve as the primary project lead, overseeing all aspects of project execution, client communication, and coordination with internal teams. We are seeking a highly skilled and communicative individual with a proven track record of managing large-scale projects, ideally within the utility engineering lifecycle, with a preference for experience in Natural Gas Facilities, Renewable Natural Gas (RNG) and/or Liquefied Natural Gas (LNG) projects. The ideal candidate will have a strong eye for quality and budget, ensuring seamless project delivery while maintaining excellent client relationships. Engineering Project Manager Pay Range: $80-120K Annually (Commensurate with Experience) Benefits: • Health, Dental, and Vision Plans, • 401K with match, • Paid Time Off (PTO), • Life and AD&D coverage, • Short and Long-Term Disability, • HSA and/or FSA Accounts, • Comprehensive Training ProgramsPrimary Duties and Responsibilities, • Act as the primary project lead for a complex Natural Gas engineering project, ensuring on-time delivery within quality and budget constraints., • Lead client meetings, develop thorough meeting minutes, and assign/track action items to ensure project milestones are met., • Collaborate with the scheduler and document controller to ensure seamless communication, document management, and project tracking., • Coordinate with technical leads across engineering disciplines (e.g., civil, mechanical, electrical, etc.) to align on project deliverables and timelines., • Oversee project progress, identifying risks and implementing mitigation strategies to maintain quality and budget adherence., • Communicate regularly with the Senior Project Manager, providing updates on project status, risks, and key decisions., • Ensure compliance with all applicable codes, standards, and owner requirements throughout the project lifecycle., • Drive accountability among team members, fostering a collaborative environment to achieve project goals., • Bachelor’s degree in engineering, construction management, or a related field., • 5+ years of project management experience in large-scale projects within the utility engineering lifecycle., • Proven experience with utility engineering projects, ideally with natural gas transmission, distribution, or station design projects., • Exceptional communication skills, both written and verbal, with the ability to lead client meetings and produce detailed documentation., • Strong organizational skills with the ability to manage multiple stakeholders and technical teams., • Proficiency in project management tools (e.g., MS Project, Excel) and document management systems., • Demonstrated ability to oversee quality and budget, ensuring project success under tight deadlines., • Ability to work independently as the primary project lead while reporting to a Senior Project Manager.Preferred, • Project Management Professional (PMP) certification or equivalent., • Experience in utility engineering project management, with a focus on RNG/LNG projects. Powered by JazzHR ksdSoZY8W3

Job Description Lornamead is currently seeking a Sr. Process Engineer to join our team! ABOUT THE COMPANY Lornamead manufactures and supplies, hair care, skin care, oral care, and bath products in America. The company offers toothpastes, teeth whitening products and oral analgesics for drug chains, and national food retailers. YOUR CHALLENGE • Develop full understanding of current manufacturing methods by reviewing process flow documentation, looking for potential process improvements, • Determine how to manufacture our products most efficiently and with the highest quality, following all regulatory requirements, • Establish management control systems for cost analysis and optimal budget planning, • Execute quality control processes to resolve problems in production cost-effectively, • Work with multiple departments to develop or validate new processes for production, • Recommend methods for improving utilization of personnel, material, and utilities., • Ensure that products meet high quality standards by designing control systems for production planning, • Communicate with vendors, contractors and maintenance to maintain equipment and plant functions, • Be part of a cross functional team for determining product failures, • Develop and implement business capital projects to achieve cost savings, environmental controls, maintenance of equipment, new equipment purchases and automation in the plant, • Work closely with Manufacturing Director and Maintenance Supervisor to evaluate manufacturing equipment issues and resolve accordingly QUALIFICATIONS • Bachelor’s degree in an engineering discipline, • 3+ years of engineering experience in a manufacturing environment, • Experience in food, pharmaceuticals, or similar industry preferred, not required, • Good understanding of machinery mechanics, • Good documentation skills, • Ability to thrive in a dynamic 3 shift environment, • Ability to multitask and work on multiple projects at the same time