Trabajos hardware en Rochester, New YorkCrear alertas

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer-RF Job Code: 40873 Job Location: Rochester, NY Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week Job Description: The successful candidate will join a team of dedicated professionals who are responsible for supporting military communication products from pre-release to obsolescence. As a member of the Product Support Engineering team you will be tasked with investigating a variety of problems including RF/Analog, digital, assembly, SMT and test related. You will collaborate across multifunctional teams to diagnose problems to component level, determining solutions via simulation and experimentation and implementing corrective actions. As new products are launched you will interface with design engineering, assisting with root cause analysis, troubleshooting of prototypes and ensuring a successful launch into full rate production. Typical tasks include: • Mitigating component shortages through qualifying alternatives or redesigning circuits and sub-assemblies., • Determining design, process, and test improvements to increase test yields and product quality., • Working in cross-functional teams to meet manufacturability, testability and other DFx requirements for volume production., • Working with design engineering and manufacturing teams to introduce new designs into manufacturing., • Working with design engineering to make necessary circuit changes prior to and during the launch of new products., • Working to mitigate component obsolescence throughout the product lifecycle., • Provide guidance to junior staff. Assisting them as they investigate problems. Leading investigations and coordinating tasks., • Working with vendors, Quality and Supply Chain to address material discrepancies., • Troubleshooting unit, modules, and boards to the component level. Essential Functions: • Hardware troubleshooting ability including analog and RF components and circuits., • Ability to work independently with general supervision., • Ability to design and conduct engineering experiments and act upon test results., • Design and analysis of circuits and components utilizing ADS, Matlab and various design and simulation tools., • Experienced in leading small technical design or troubleshoot team, providing direction and prioritizing tasks to meet target yields and shipments., • Generate and deliver presentations for various levels of management regarding issues, investigations, improvements or cost savings in a concise manner., • Ability to work in a fast-paced environment interfacing with multiple teams across the organization., • Ability to use typical lab equipment: Oscilloscope, DMM, Spectrum & Network analyzers, and signal generators., • Must be a quick learner, able to problem solve and be self-motivated., • Able to analyze designs and communicate technical information to support staff., • Ability to Obtain a US Security Clearance Qualifications: • Bachelor’s Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience in RF., • 4+ years of RF experience. Preferred Additional Skills: • Electrical engineering degree., • Experience with tactical Radio and Power Amplifier HW., • Experience troubleshooting to component level., • Working knowledge of LabVIEW, ADS and Jira., • Experience with MS Office including advanced spreadsheet manipulation and presentation creation., • Excellent communication and interpersonal skills with all levels of organization & supplier base. In compliance with pay transparency requirements, the salary range for this role in New York State is $90,500 - $168,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in or . For information regarding your Right To Work, please click here for or .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Associate, Production Planning Job Code: 41242 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked, and have every other Friday off Job Description: As a new graduate in the production planning role, you will assist in planning, scheduling, and monitoring manufacturing status and approval of products through the entire production cycle to meet production, and ultimately customer, requirements. You will work from engineering plans and production specifications to ensure timely provision of materials. Additionally, you will advise management on the status of work in progress, coordinate with manufacturing, quality, and supply chain teams, and interface with engineering, program management, and external customers. Your responsibilities will include ensuring the availability of materials and labor to meet production needs and delivery commitments, as well as resolving labor and material shortages, backlogs, and other potential schedule interruptions. Essential Functions: Develop and implement manufacturing build plans to meet customer contractual delivery schedules Utilize Materials Requirement Planning (MRP) system to input Master Schedule build plans, track material availability, status kit readiness, release shop orders, and maintain all shop order records and inventory integrity Update and maintain make items lead times within MRP system Manage floor stock of program components Work jointly with Manufacturing and Quality teams to execute build schedule and address any issues in a timely manner Work with Materials Planners to proactively manage the schedule and material dock dates to ensure accuracy of planning Provide hardware status, updates and performance statistics to program team based on status of hardware through Manufacturing Execution System (MES) Qualifications: To be eligible, applicants must be pursuing a bachelor’s degree in supply chain management, Logistics Management, Manufacturing Engineering, Industrial Engineering, Business Administration or related field or have completed their bachelor’s degree within the last 12 months, regardless of age. In compliance with pay transparency requirements, the salary range for this role in Virgina is $46,500 - $86,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in or . For information regarding your Right To Work, please click here for or .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Associate, Systems Engineering Job Code: 41239 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked, and have every other Friday off Job Description: Perform operational analysis and develop concept of operations, design and implementation plans Develop test plans, procedures & cases Conduct tests and document results Use software tools, scripting and software/hardware troubleshooting Analyze systems requirements from end systems and users Supports development and evaluation of complex system designs and architectures Develop and deliver presentations to communicate design activity plans and status to internal and external customers Qualifications: To be eligible, applicants must be pursuing a Bachelor’s degree in Systems Engineering, Electrical Engineering, Mechanical Engineering, Computer Engineering, Computer Science, Physics, Mathematics, Aviation, Aerospace Engineering, or related field or have completed their Bachelor’s degree within the last 12 months, regardless of age. In compliance with pay transparency requirements, the salary range for this role in New York state is $62,000 - $115,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in or . For information regarding your Right To Work, please click here for or .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer Job Code: 40874 Job Location: Rochester, NY Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week Job Description: The successful candidate will join a team of dedicated professionals who are responsible for supporting military communication products throughout their lifecycle. As a Product Support Engineer you will be tasked with investigating a variety of problems related to Analog, Digital, and RF. Candidates with experience in any of these areas will be considered. Working from our lab adjacent to manufacturing you will collaborate across multifunctional teams to diagnose problems to component level, determine solutions via experimentation and simulation and implement corrective actions. As an extension of design engineering, you will have the opportunity to learn and grow while providing electrical engineering support to technicians and junior engineers. As new products are launched you will interface across engineering, assisting with root cause analysis, troubleshooting of prototypes and ensuring a successful launch into full-rate production. Typical tasks include: • Monitoring daily factory yields, investigating failures, and determining corrective actions., • Mitigating component shortages through selecting and qualifying alternatives or redesigning circuits and sub-assemblies., • Determining design, process, and test improvements to increase test yields and product quality., • Working as part of a cross-functional team to meet manufacturability, testability and other DFx requirements for volume production., • Working with other engineering teams to make necessary circuit changes prior to and during the launch of new products., • Working to mitigate component obsolescence throughout the product lifecycle., • Provide guidance to junior staff by providing assistance as they investigate problems., • Lead investigations, coordinate tasks, and direct junior staff as required., • Work with Quality and Supply Chain to address material discrepancies., • Troubleshooting unit, modules, and boards to the component level., • Support digital and related analog hardware designs., • Perform detailed analysis of analog, digital and/or RF circuitry. Essential Functions: • Hardware troubleshooting ability to component level for analog and digital circuits., • Ability to work independently and within a team setting., • Ability to design and conduct engineering experiments and act upon test results., • Design and analysis of circuits and components utilizing various simulation tools., • Experienced in leading small technical design or troubleshooting team, providing direction and prioritizing tasks to meet target yields and shipments., • Ability to work in a fast-paced environment interfacing with multiple teams across the organization., • Ability to use typical lab equipment: Oscilloscope, DMM, Spectrum & Network analyzers, logic analyzers and signal generators., • A driven person that wants to learn and is a proven problem solver., • Able to analyze designs and communicate technical information to support staff., • Ability to obtain a US Security Clearance. Qualifications: • Bachelor’s EE Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience in Electrical Engineering. Preferred Additional Skills: • Experience with tactical radios is a plus., • Experience reading schematics and datasheets, probing circuits and understanding proper circuit operation., • Troubleshoot circuit assemblies to component level, • Ability to select alternate electronic components and know what testing is required to qualify them., • Working knowledge of LabVIEW and Jira a plus., • Experience in a manufacturing environment is a plus. In compliance with pay transparency requirements, the salary range for this role in New York State is $92,500 - $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in or . For information regarding your Right To Work, please click here for or .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Electrical Engineering Job Code: 43477 Job Location: Rochester, NY Job Schedule: 9/80 (Every other Friday off) Job Description: This Electrical Engineer will be responsible for leading and guiding the development of complex electronics hardware and subassemblies for a variety of seabed applications. The position requires prior experience in digital and analog circuit design, CCA and subsystem integration, and system qualification and test. The position presents a tremendous opportunity for exposure and growth, involving communication with internal and external customers and stakeholders to explain and influence changes to practices, processes and approaches. Essential Functions: • Applicable experience in electrical, electro-mechanical design, tooling/fixture design, • Strong communication skills (verbal and written) for internal and external presentations and reviews. Communication includes within and outside of own function to gain cooperation on operational processes, practices, and procedures., • Candidate must work well as part of a team, • Responsible for architecting, designing, developing, modifying, evaluating and integrating electronic circuit cards, electronic parts, components, or integrated circuitry for complex, high performance seabed hydrophone systems., • Creates Analog and Digital designs of electro-mechanical systems and control systems, • Analyzes electrical requirements to determine feasibility of design within time and cost constraints, • Responsible for providing input to program bids and generating bases of estimate, • Able to identify component operational characteristics that may impact system performance and or sustainability Qualifications: • Bachelors of Science in engineering and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: • Proficient in LTSpice, Cadence/Allegro PCB Designer, Mentor Graphics, • Proficient in technical writing to include Electrical test procedures, specifications, white papers, design reviews and technical presentations., • Secret or Top Secret SCI or DoD clearance In compliance with pay transparency requirements, the salary range for this role in New York state is $80,500.00 - $149,500.00 This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-KB1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in or . For information regarding your Right To Work, please click here for or .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Systems Engineering (Network Engineering) Job Code: 40616 Job Location: Rochester, NY Job Schedule: 9/80 - Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off This Sr. Specialist position will have a critical role in delivering advanced engineering support for L3Harris’ next-generation tactical communication solutions. Working directly with customers in operational environments, providing high-level technical support, system integration, and proactive problem resolution while serving as a key technical liaison back to Systems Engineering, Product Engineering, Product Management, and Sales. This role is well-suited for technically strong, hands-on engineers who enjoy solving complex networking problems, working close to real-world deployments, and contributing to the evolution of innovative tactical communications systems. The successful candidate will integrate, troubleshoot and support deployment of wired and wireless networked systems, with a strong emphasis on IP-based networking, routing, and tunneling technologies. The role will require both real time troubleshooting and issue resolution as well as proactive problem solving by identifying risks, improving configurations, and sharing knowledge across teams to drive continuous improvement and customer success. Essential Functions: • Provide advanced technical support for tactical communication systems in lab, field, and customer environments, • Develop SME knowledge on the features and use cases of our suite of tactical waveforms., • Manage and resolve complex customer incidents and technical escalations, • Perform hardware and software system integration of wired and wireless network solutions, • Design, configure, and troubleshoot IP-based network architectures using fielded tactical radio solutions., • Apply and support networking technologies including VLANs, redundancy protocols (e.g., VRRP), Routing Protocols and tunneling solutions., • Proactively identify potential system or network issues and recommend preventative or corrective actions, • Serve as a technical liaison between customers, Product Engineering, Program Management, and Sales, • Accurately document findings and contribute to internal knowledge sharing, training materials, and best practices, • Support continuous improvement by providing customer feedback and operational insights to product teams, • Travel domestic and internationally approximately 50% Qualifications: • Bachelor’s Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience. Preferred Additional Skills: • Hands-on experience with:, • Network tunneling technologies (e.g., GRE, IPsec, ZeroTier or equivalent), • Fielded Applications (e.g., TAK, ICE, InstantConnect), • Experience supporting tactical, RF, or mission-critical communication systems, • Technical proficiency with wideband networking technologies, including but not limited to ANW2C, Wren-TSM, and Wraith, with a capacity to adapt to new and evolving communication systems., • Enjoy working with people, developing relationships and sharing knowledge., • Experience contributing to technical documentation, training, or customer enablement, • Interest in emerging technologies and contributing to new product capabilities early in their lifecycle, • Understanding of Tactical Radio Communications, including RF propagation, frequency planning/spectrum management, antenna and system component selection and trade studies., • Prior Military or worked in a military environment with a working knowledge of military asset use cases, maneuvers, command structures, and signals doctrine. Experience participating in and supporting exercises on military installations, interacting with enlisted and officer personnel., • Comfortable working in fast-paced, evolving technical environments, • CCNA Certification(s), • Strong foundational knowledge of IP networking concepts and protocols, • Experience integrating and supporting networked systems across wired and wireless environments, • Working knowledge of routing, switching, and basic network security principles, • Ability to perform root cause analysis and troubleshoot complex, multi-layer technical issues, • Direct customer and end-user interaction experience, proven and effective communications skills, interpersonal skills and customer focus are a must., • Willingness to travel in support of customer engagements and field activities, • US Government Secret security clearance or ability to obtain. In compliance with pay transparency requirements, the salary range for this role in New York State is $92,500 - $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-RK2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in or . For information regarding your Right To Work, please click here for or .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead Software Engineer Job Code: 42047 Job Location: Rochester NY or Lynchburg VA Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked, and have every other Friday off Job Description: L3Harris Technologies is seeking a Lead Software Engineer (Level 5) to Join the devices team developing next-generation radio platform software. This critical role sits at the intersection of complex embedded real-time software engineering and modern, cutting-edge AI-driven development methodologies. As a technical leader, you will design robust architectures for tactical communications while leveraging AI tools to accelerate the software development lifecycle (SDLC). The ideal candidate brings mastery of embedded Linux and Android operating systems, along with a passion for driving engineering excellence in a collaborative Agile Environment. Essential Functions: • Lead Architecture Design: Architect and design robust, next-generation software platforms for complex embedded tactical communication devices., • Drive AI Integration: Pioneer and implement AI-driven development methodologies to accelerate and optimize the full software development lifecycle., • Execute OS Development: Develop, customize, and maintain core software utilizing embedded Linux and Android operating systems., • Provide Technical Leadership: Guide engineering teams, foster a collaborative Agile environment, and champion technical excellence across the devices team., • Ensure Real-Time Performance: Optimize complex, low-level real-time software to meet strict tactical performance, safety, and reliability standards. Qualifications: • Bachelor’s Degree and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. Preferred Additional Skills: • Deep understanding of tactical radio communication protocols, digital signal processing (DSP), and waveform design., • Experience with Linux kernel modification, custom U-Boot configuration, and hardware debugging tools (e.g., JTAG, oscilloscopes, logic analyzers)., • Familiarity with Android Open-Source Project (AOSP) customization or Android HAL (Hardware Abstraction Layer) development., • Strong background in automated test environments, continuous integration/continuous deployment (CI/CD) pipelines, and DevOps workflows, • Leadership: 2+ years of experience acting as technical lead., • Core Languages: Expert-level proficiency in C and modern C++ for real-time operating systems (RTOS) and embedded environments., • Operating Systems: Proven hands-on track record developing embedded software architectures utilizing Linux and Android distributions., • AI Tooling: Practical experience integrating generative AI or AI-assisted development tools within a professional software environment. In compliance with pay transparency requirements, the salary range for this role in New York and Virginia (outside of Greater D.C. area) is $117,000 to $218,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-RK2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in or . For information regarding your Right To Work, please click here for or .

The Product Safety & Compliance Engineer works directly within the engineering development team to ensure our products meet all global safety standards, regulatory requirements, and quality certifications throughout the entire product lifecycle. You will integrate safety-by-design principles from the conceptual phase through prototyping, testing, and final market release, ensuring our products are safe, reliable, and compliant with all relevant market directives. Key Responsibilities • Safety-by-Design Integration: Collaborate with R&D and design teams to identify safety risks during the early stages of product development and advocate for engineering controls that mitigate those risks., • Compliance Strategy: Maintain and update a roadmap of applicable global safety standards (e.g., IEC, UL, CE, ANSI, CSA) relevant to the product line., • Certification Management: Lead the coordination of third-party product testing, certification filings, and audits (e.g., UL listings, CE marking)., • Risk & Hazard Analysis: Conduct formal Product Safety Risk Assessments, including FMEA (Failure Mode and Effects Analysis) and Fault Tree Analysis, to validate design robustness., • Technical Documentation: Author and maintain technical files, Declarations of Conformity, and safety documentation required for market access and regulatory submission., • Post-Market Surveillance: Assist in the analysis of field data, customer feedback, and product returns to identify potential safety trends or necessary design improvements. Required Qualifications • Bachelor’s degree in Electrical, Mechanical, Systems Engineering, or a related technical discipline., • 5+ years of experience in product development, quality engineering, or regulatory compliance. Eligibility Requirements • The work location for this role is in Rochester, NY (Relocation assistance provided if not already local). Preferred Skills • In-depth familiarity with global safety and compliance standards relevant to our product sector., • Strong background in product testing methodologies, hardware/software validation, and engineering design documentation., • Ability to balance aggressive product development timelines with the strict requirements of regulatory safety., • Experience with international market entry requirements (e.g., EU MDR, RoHS, REACH)., • Certification as a Regulatory Affairs Professional or specialized training in Product Safety., • Familiarity with cross-functional project management tools (e.g., Jira, PLM systems). GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes For candidates applying to a U.S. based position, the pay range for this position is between $89,300.00 and $148,700.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate’s experience, education, and skill set. Bonus eligibility: discretionary annual bonus. This posting is expected to remain open for at least seven days after it was posted on June 29, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off. GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

MMR Consulting is an engineering and consulting firm specializing in the pharmaceutical and biotechnology industries. Its services include Engineering, Project Management, and Validation. \n MMR Consulting has offices in Canada, USA, and Australia. \n We are seeking an experienced Senior Software Verification and Validation (V&V) Engineer to support the development, integration, verification, and validation of medical devices, diagnostic systems, laboratory instrumentation, and associated software. The ideal candidate will have strong experience working in a regulated medical device, diagnostic, laboratory, or life sciences environment, with a background in software and system verification and validation. \n This position will support new product development, software and instrument integration, technology transfer, system-level verification, software validation, and post-launch product support. The engineer will work across hardware, software, systems, laboratory, quality, and engineering functions throughout the product development life cycle. \n This is a hands-on V&V position, not a role focused solely on writing test documentation. \n This is a full-time, onsite position in the Rochester, NY area. Candidates must be willing and able to commute to the facility daily. \n Approximately 70% of the role will involve hands-on testing and validation activities, with the remainder involving test planning, requirements review, documentation, data analysis, defect investigation, meetings, and cross-functional engineering activities. \n \n Key Responsibilities \n\n • Develop and execute verification and validation strategies for medical devices, diagnostic systems, laboratory instruments, and associated software.\n, • Develop and execute software and system-level test plans, test protocols, test cases, and test procedures.\n, • Perform verification and validation throughout the medical device/product development life cycle.\n, • Translate system, software, and user requirements into measurable verification and validation activities.\n, • Establish and maintain requirements traceability between requirements, risk controls, test cases, test execution, and test results.\n, • Perform hands-on testing of integrated medical device systems, instrumentation, software, and subsystems.\n, • Execute software validation testing, including functional, system, integration, regression, and negative testing as appropriate.\n, • Evaluate software/hardware interfaces and system integration to identify unexpected behavior, defects, or performance issues.\n, • Document test results, deviations, anomalies, defects, and conclusions in accordance with established quality procedures.\n, • Troubleshoot failures and unexpected test results and work with engineering and software development teams to identify root causes and corrective actions.\n, • Participate in defect investigation, resolution, retesting, and regression testing.\n, • Support design verification, subsystem validation, system validation, and post-launch product support.\n, • Generate and review requirements, specifications, test procedures, protocols, and validation documentation for completeness and technical accuracy.\n, • Review the work of other engineers and provide feedback regarding testing quality, documentation, and requirements traceability.\n, • Support technology transfer and new product introduction activities.\n, • Work with multidisciplinary teams consisting of software, systems, electrical, mechanical, laboratory, quality, regulatory, and product development personnel.\n, • Support configuration and installation of software and computer systems used in testing.\n, • Participate in software/test automation activities where appropriate.\n, • Develop or utilize scripts to support automated testing, data collection, test execution, and analysis.\n, • Adapt quickly to changing project priorities and support multiple projects as required.\n\n Software Verification & Validation \n The successful candidate should have experience with software verification and validation within a regulated product development environment. \n Experience may include: \n\n • Software requirements verification\n, • Software functional testing\n, • System integration testing\n, • System-level verification\n, • Software validation\n, • Regression testing\n, • User requirements verification\n, • Interface testing\n, • Installation and configuration testing\n, • Automated testing\n, • Defect identification and tracking\n, • Test script development\n, • Test execution and results analysis\n, • Requirements traceability\n, • Risk-based testing\n, • Software/hardware integration testing\n\n Experience working with software embedded in or supporting medical devices, diagnostic instruments, laboratory systems, or regulated equipment is highly desirable. \n Medical Device V&V \n Candidates should understand the principles of verification and validation within a regulated medical device or diagnostic development environment. \n Experience with the following is highly desirable: \n\n • Design verification\n, • Design validation\n, • Software validation\n, • Requirements management\n, • Traceability\n, • Risk-based verification\n, • Test protocol development\n, • Test execution\n, • Defect management\n, • Change control\n, • Configuration management\n, • Design controls\n, • Product development life cycle processes\n, • Post-market or post-launch product support\n\n Required Qualifications \n\n • Bachelor's degree or higher in Systems Engineering, Software Engineering, Computer Science, Electrical Engineering, Mechanical Engineering, Biomedical Engineering, or a related engineering/science discipline.Equivalent combination of education and directly relevant experience may be considered.\n, • 15+ years of relevant engineering, software V&V, systems V&V, medical device validation, or regulated product development experience; candidates with strong directly applicable experience may be considered with fewer years.\n, • Demonstrated experience with medical device, diagnostic, laboratory, or other regulated products.\n, • Experience developing and executing verification and validation testing.\n, • Experience creating and maintaining requirements traceability.\n, • Experience working within a structured product development and quality environment.\n, • Experience troubleshooting complex software/hardware systems.\n, • Strong understanding of software verification and validation methodologies.\n, • Strong understanding of system-level verification and validation.\n, • Experience translating requirements into testable acceptance criteria and test cases.\n, • Strong technical documentation skills.\n, • Strong analytical and troubleshooting abilities.\n, • Experience with software and system integration testing.\n, • Experience with test automation and/or automated data collection.\n, • Basic programming or scripting experience using technologies such as:\n, • Python\n, • VBA\n, • C/C++\n, • Other scripting or programming languages\n, • Experience configuring and installing computer systems and software used for testing.\n, • Understanding of cybersecurity considerations within medical devices, laboratory systems, or connected equipment is beneficial.\n\n V&V / Quality Systems Experience \n Experience with regulated development processes and quality systems is highly desirable, including familiarity with: \n\n • Medical device design controls\n, • Software development life cycle processes\n, • Requirements management\n, • Risk management\n, • Configuration management\n, • Change control\n, • Defect management\n, • Traceability\n, • Verification and validation documentation\n, • Quality management systems\n, • Regulated product development\n\n Development & Quality Tools \n Experience with one or more of the following is preferred: \n\n • Jira\n, • Windchill\n, • HP ALM / Quality Center\n, • Serena Business Mashups\n, • Aligned Elements\n, • Microsoft Team Foundation Server (TFS)\n\n Preferred Qualifications \n\n • Experience with medical device software validation.\n, • Experience validating software embedded within medical devices or diagnostic instruments.\n, • Experience with laboratory information systems, diagnostic systems, or laboratory automation.\n, • Experience with clinical or diagnostic analyzers.\n, • Experience with automated laboratory analyzers, including VITROS® systems, is a plus.\n, • Experience with software test automation.\n, • Experience with Python, VBA, C/C++, or similar programming/scripting languages.\n, • Experience with assay/instrument integration.\n, • Experience supporting technology transfer or new product introduction.\n, • Experience working in a regulated medical device, diagnostics, or life sciences environment.\n\n Key Attributes \n The successful candidate will be: \n\n • Hands-on: Comfortable spending significant time executing tests rather than working exclusively on documentation.\n, • Technically strong: Able to understand interactions between software, hardware, instrumentation, and systems.\n, • Detail-oriented: Able to produce accurate, audit-ready V&V documentation and maintain rigorous traceability.\n, • Analytical: Able to investigate failures, identify potential root causes, and work with development teams toward resolution.\n, • Adaptable: Comfortable moving between projects as priorities change.\n, • Collaborative: Able to work effectively with software, systems, engineering, quality, laboratory, and regulatory teams.\n, • Independent: Capable of developing and executing V&V activities with appropriate judgment and minimal supervision.\n\n Compensation starts from 150k/yr based on experience and expertise. \n \n As part of our recruitment process, we may use technology-assisted tools, including AI-enabled systems, to support application review and candidate evaluation. Hiring decisions are made with human oversight and consideration. \n \n Equal Employment Opportunity and Reasonable Accommodations \n MMR Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our hiring decisions are based on merit, qualifications, and business needs. We are committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please let us know the nature of your request. \n

The major objective for this Inside Sales Representative position is to increase sales in your assigned territory through growing existing customer accounts, cultivating new accounts, and creating new business opportunities. You will manage transactional accounts, provide standard quoting, and operate within established pricing guidelines. You will be in a thriving environment handling established OEM and contract manufacturing (CM) accounts. Your goal is to take DB Roberts, its franchised lines, and services deeper into the accounts and be the indispensable and trusted go-to source. ESSENTIAL DUTIES AND RESPONSIBILITIES: Other duties as assigned. • Work with Field Sales Representatives to increase business at assigned accounts., • Identify, profile, qualify and quantify key growth markets and accounts., • Develop solid working relationships with key contacts within assigned customers., • Provide high levels of customer service through phone calls, emails, letters, and faxes., • Develop and execute effective quoting strategies for assigned customers., • Provide regular backup support for other Inside Sales team members., • Handling book of business of 3 million dollars or less annually. EDUCATION/EXPERIENCE: • Bachelor's degree (B.A.) from a four-year College or university or have mechanical aptitude with at least one year experience selling fasteners or related product preferred., • 1-2 years successful sales or related experience. SKILLS AND REQUIREMENTS: • To perform the position, you must be a U.S. Person as defined by ITAR. ITAR defines a US Person as a US Citizen, US Permanent Resident (I.e., 'Green Card Holder'), Political Asylee, or Refugee., • Must be able to report to assigned office location during scheduled in-office workdays., • Excellent communication and interpersonal skills., • Strong customer service skills, customer focus., • Strong attention to detail and organizational skills. PHYSICAL REQUIREMENTS: While performing the duties of this job the employee is often required to stand, sit, use computers, read, write, type, use copy machines, file paperwork, use telephones, and utilize written and oral communication to interact with clients, co-workers, and customers. Reasonable accommodations may be made to enable individuals to perform the essential functions of this job. Sedentary work. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects. Substantial movements (motions) of the wrists, hands, and/or fingers (paperwork, typing, using mouse/keyboard). The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. WORKING CONDITIONS: Position is not substantially exposed to adverse environmental conditions (such as in typical office or administrative work.) Equal Opportunity Employer We are an Equal Employment Opportunity employer that values the strength diversity brings to the workplace. All qualified applicants, regardless of race, color, religion, gender, sexual orientation, marital status, gender identity or expression, national origin, genetics, age, disability status, protected veteran status, or any other characteristic protected by applicable law, are strongly encouraged to apply. If this is a US based role the following applies. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). To perform the position, you much be a U.S. Person as defined by ITAR. ITAR defines a US Person as a US Citizen, US Permanent Resident (I.e. 'Green Card Holder'), Political Asylee, or Refugee. DB Roberts offers a comprehensive benefits package to all full time, regular employees located in the United States which include: • Comprehensive medical, dental and vision, • Vacation, sick time and holidays, • Accident, life, disability and critical illness insurance, • 401k retirement program with match, • Wellness programs, • Tuition reimbursement, • Referral bonuses, • Pet insurance, • Employee discount program, • And the day off for your birthday!

Job Title: Technical Writer, Optics \n \n \nPosting Start Date: 10/2/26 \n \n At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. \n \n \nJob Description: \n \n Job Overview\n \n Position Summary\n \n \nThe Senior Technical Writer is responsible for building and maintaining the technical documentation framework for a fast-growing engineering and manufacturing organization. This role works directly with engineers, manufacturing teams, Program Management, Quality, and technical leaders to capture complex technical knowledge and translate it into clear, accurate, controlled, and usable documentation. The successful candidate will combine strong technical aptitude, structured thinking, curiosity, communication skills, and the ability to work effectively with experienced technical teams.\n \n Location\n \nThis is an onsite/hybrid role based in the Rochester, NY area, with an expectation of spending at least three days per week onsite working closely with engineering and manufacturing teams.\n \n Job Requirements\n \n Key Responsibilities\n Technical Documentation & Knowledge Capture\n \n• Develop and maintain engineering and manufacturing documentation, including specifications, design documents, process specifications, work instructions, SOPs, test and validation procedures, troubleshooting guides, technical reports, and engineering standards.\n \n• Work directly with subject matter experts to capture technical knowledge from discussions, drawings, test data, working notes, and practical experience.\n \n• Lead structured interviews and working sessions to clarify requirements, assumptions, dependencies, interfaces, acceptance criteria, and decision rationale.\n \n• Translate complex technical concepts into clear, concise documentation appropriate for the intended audience.\n \n• Identify gaps, inconsistencies, and undocumented practices and work with technical owners to resolve them.\n \n• Convert tribal knowledge into structured, reusable organizational knowledge.\n \n• Ensure documentation is aligned with engineering change, configuration-management, quality, and product-release processes.\n \n• Manage multiple documentation projects and priorities while coordinating inputs and approvals from cross-functional stakeholders.\n \n• Develop a prioritized documentation roadmap based on engineering, manufacturing, quality, and business needs.\n \n Process & Document Management\n \n• Document end-to-end engineering and manufacturing workflows, including process steps, ownership, inputs, outputs, controls, decision points, and acceptance criteria.\n \n• Establish scalable document structures, naming conventions, metadata, ownership, revision control, and lifecycle practices.\n \n• Define authoritative sources of technical information and improve traceability across requirements, designs, processes, test results, and released documentation.\n \n• Ensure documentation aligns with engineering change, configuration-management, quality, and product-release processes.\n \n• Develop practical templates and documentation standards and reduce duplicate, outdated, or conflicting information.\n \n Documentation Systems & Execution\n \n• Manage documentation priorities and projects from discovery through review, approval, publication, maintenance, and retirement.\n \n• Develop a prioritized documentation roadmap aligned with engineering, manufacturing, quality, and business needs.\n \n• Partner with Engineering, Quality, Program Management, Operations, and IT to improve documentation workflows, repositories, and collaboration tools.\n \n• Support PLM, document-management, and knowledge-management systems.\n \n• Identify opportunities to simplify, standardize, and automate documentation processes.\n \n Cross-Functional Collaboration\n \n• Build trusted relationships with engineers and technical leaders across multiple disciplines.\n \n• Facilitate documentation working sessions and independently convert technical discussions into structured outputs.\n \n• Communicate effectively across different technical functions and levels of seniority.\n \n• Drive adoption of documentation standards without direct authority.\n \n• Balance documentation rigor and control with usability, speed, and the needs of a fast-moving organization.\n \n What your background should look like\n \n• Bachelor's degree in Engineering or another technical discipline, or equivalent technical experience.\n \n• 10+ years of technical documentation experience in engineering, manufacturing, hardware, semiconductor, industrial, or similarly complex technical environments.\n \n• Demonstrated ability to understand complex technical systems and communicate them clearly.\n \n• Experience working directly with engineers and technical subject matter experts.\n \n• Experience developing specifications, engineering procedures, process documentation, work instructions, or similar technical content.\n \n• Familiarity with configuration management, revision control, requirements management, document control, and quality-management systems.\n \n• Experience with PLM, document-management, knowledge-management, or engineering collaboration platforms.\n \n• Experience working within a quality management system or controlled document environment.\n \n• Experience creating process maps, technical diagrams, system architecture diagrams, workflows, photographs, and annotated images.\n \n• Strong analytical, structured-thinking, written, verbal, and facilitation skills.\n \n• Ability to independently manage documentation from discovery through publication and lifecycle maintenance.\n \n• Strong interpersonal skills and ability to build credibility with experienced technical professionals.\n \n• Ability to provide technical writing samples or a portfolio, subject to confidentiality restrictions.\n \n• Experience managing documentation projects from initial discovery through review, approval, publication, maintenance, and retirement.\n \n• Ability to influence stakeholders and drive adoption of documentation standards without direct authority.\n \n Highly Preferred\n \n• Experience in optics, electronics, semiconductors, automation, precision equipment, manufacturing, or complex hardware development.\n \n• Experience documenting both products and manufacturing equipment.\n \n• Experience helping a rapidly scaling organization establish disciplined engineering documentation and knowledge-management practices.\n \n Competencies\n \n \nValues: Integrity, Accountability, Inclusion, Innovation, Teamwork \n \n ABOUT TE CONNECTIVITY\n \n \nTE Connectivity plc (NYSE: TEL) is a global industrial technology leader creating a safer, sustainable, productive, and connected future. As a trusted innovation partner, our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, energy networks, automated factories, data centers enabling artificial intelligence, and more.\n \n \nOur more than 90,000 employees, including 10,000 engineers, work alongside customers in approximately 130 countries. In a world that is racing ahead, TE ensures that EVERY CONNECTION COUNTS. Learn more at www.te.com and on LinkedIn, Facebook, WeChat, Instagram and X (formerly Twitter).\n \n COMPENSATION\n \n• Competitive base salary commensurate with experience: $75,400 - $113,000 (subject to change dependent on physical location)\n \n• Posted salary ranges are made in good faith. TE Connectivity reserves the right to adjust ranges depending on the experience/qualification of the selected candidate as well as internal and external equity.\n \n• Total Compensation = Base Salary + Incentive(s) + Benefits\n \n BENEFITS\n \n• A comprehensive benefits package including health insurance, 401(k), disability, life insurance, employee stock purchase plan, paid time off and voluntary benefits.\n \n EOE, Including Disability/Vets\n \n IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD\n \nTE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity never requests payment or fees from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com. If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities.\n \n Job Locations:\n \n \nPosting City: Rochester \n \n \nJob Country: United States \n \n \nTravel Required: 25% to 50% \n \n \nRequisition ID: 159764 \n \n \nWorkplace Type: Hybrid \n \n \nExternal Careers Page: Engineering & Technology

SDN developer with Core Networking & Radio Integration Experience Location: Rochester NY | Onsite Contract Job Description: • Design and develop a C++ configuration service that launches, manages, and configures other services running on the host platform., • Implement configuration support for REST and CLI access paths., • Integrate gRPC/SNMP/ for service communication and configuration data exchange., • Provide support to the core networking team, including debugging, code integration, and testing on embedded/radio hardware., • Develop a web UI for device configuration and monitoring. Required Qualifications • Strong proficiency in C++, including cross-platform development experience., • Solid understanding of networking fundamentals (TCP/IP, routing, ACLs, firewalls)., • Experience with Linux-based embedded systems., • Familiarity with REST API design and/or gRPC service integration., • Experience with CLI tool development for system/service configuration., • Familiarity with IPv6, automation tools, or network scripting (Python, Ansible)., • Front-end/web UI development experience for embedded device interfaces.

Senior Instrument & Controls Technician Location: Rochester, NY | Onsite (Direct Hire / Full Time) Compensation: $40-$48 (Hourly / Non-Exempt) + Optional Overtime Reports to: Manager, Information & Communications Technology A highly specialized energy and utility infrastructure organization is seeking a Senior Instrument & Controls Technician to support and maintain critical industrial utility plant operations within one of the region’s most technically advanced industrial campuses. This individual will play a key role in maintaining and optimizing instrumentation and control systems that support steam, chilled water, and related utility services across a large-scale infrastructure environment. This is a unique opportunity for an experienced controls professional who enjoys solving complex technical challenges, working across both legacy and modern industrial systems, and playing a hands-on role in maintaining critical infrastructure operations. The environment offers broad exposure to power generation, utilities, automation, instrumentation, and plant control systems in a highly visible and operationally critical role. The ideal candidate will bring strong troubleshooting ability, industrial controls expertise, and the ability to work collaboratively across operations, maintenance, engineering, and external vendor teams. Why This Opportunity Stands Out • Work within a large-scale industrial utility and energy environment supporting critical infrastructure operations, • Exposure to a blend of classic and modern plant control technologies, • High-impact technical role with visibility across plant operations, • Opportunity to work on complex instrumentation, PLC, and distributed control systems, • Broad technical scope across utilities, boilers, turbines, chillers, generators, and process systems, • Stable operation with long-term infrastructure investment and modernization initiatives Key Responsibilities • Coordinate daily work activities of the Instrumentation & Controls team, • Install, maintain, troubleshoot, and repair industrial instrumentation and plant control systems, • Support PLC and Distributed Control System (DCS) hardware, software, and programming, • Calibrate and maintain instrumentation used to monitor pressure, flow, temperature, and analytical systems, • Troubleshoot pneumatic and electronic control devices, valves, dampers, and final control elements, • Modify and improve plant operating graphics and control configurations, • Coordinate contractors and field service providers supporting control system projects, • Support plant system reliability, operational efficiency, and continuous improvement initiatives, • Maintain proper system access controls and physical security of critical equipment Must-Have Qualifications • 10+ years of industrial controls, instrumentation, or utility plant experience, • Strong troubleshooting and problem-solving skills, • Experience supporting PLCs and Distributed Control Systems (DCS), • Ability to read and interpret electrical schematics, control drawings, and circuit diagrams, • Strong mechanical and electrical aptitude, • Experience working in industrial, utility, manufacturing, or power generation environments, • Familiarity with boilers, turbines, chillers, cooling towers, generators, and utility systems, • Valid driver’s license and proof of insurance Preferred Qualifications • Associate degree in Engineering Technology or related technical field, • Experience with industrial networking technologies including copper and fiber systems, • Familiarity with Windows operating systems and industrial PC environments, • Experience supporting industrial automation upgrades and process improvements Ideal Candidate Profile This opportunity is ideal for a technically curious and hands-on controls professional who enjoys operating independently, troubleshooting complex systems, and contributing to the reliability and performance of critical industrial operations. Candidates who thrive in fast-paced industrial environments and enjoy solving real-world operational challenges will be especially successful in this role. Precision Talent Partners, LLC values diversity and is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive workplace where all employees feel respected, supported, and empowered to contribute. This description reflects management’s assignment of essential functions and does not restrict the tasks that may be assigned. Employment is at-will, and this job description does not constitute a contract of employment.

Brekland is an early-stage, climate resilience agriculture company based in New York that develops systems to help farmers protect their crops from billion-dollar frost events. Brekland’s solution is a biodegradable spray-on foam that can be applied just hours before a frost and protect sensitive crops from damage. We will begin commercializing our first product in 2027 and have also started expanding beyond frost into other product lines using our foam platform. Brekland is a VC backed company supported by Activate and is the recent winner of the 2025 $1M Grow-NY prize. About the job We’re looking for a Hardware Engineer to help build, test and scale-up our foam spray system (link). You’ll work closely with our current hardware engineer and our Chief Scientific Officer to improve our system and help set up and scale our manufacturing. In addition, as our portfolio expands, you will be directly involved in the early-stage R&D of new hardware systems to support these products. About you: • You’re a builder and deliver. You’re excited about building hardware, are well versed in CAD, are passionate about wrenching and can move projects from start to finish quickly., • You’re entrepreneurially driven and independent. You don’t need constant oversight to get a task completed but also know when to reach out for help., • You’re a resourceful problem solver. When faced with a new problem, you identify multiple paths to find a solution and will make it happen. What you can expect: • We’ve completed assembly and field testing of a commercial prototype of our first product (see here)– your role will be to continue its development and support building the first commercial units to be delivered in Spring 2027., • To meet our delivery timeline, you’ll help optimize our design, build and rigorously test the next generation of foam-sprayer hardware and then lead assembly for delivery to customers., • This role is based at our offices in in Greece, NY, just outside of Rochester, and will require occasional travel to field testing sites in the Finger lakes, NYC, Virginia and France. Key qualifications: • Either a BS in mechanical engineering (or related field) with 3+ years of experience, or an engineering technician degree with 5+ years of experience., • Experience designing and building electrical systems and coding PLC systems, • Well-versed in CAD, • Entrepreneurial experience, either working at a startup or starting your own venture/project Things that can set you apart: • Experience working in agriculture, including building equipment, operating equipment, or working in agricultural operations generally, • You’ve designed and built 2+ hardware prototypes or done other design/build projects outside of work, • Experience machining parts, welding, 3D printing and other component fabrication skills, • Proficient in French and/or Spanish

Akkodis is seeking a for an Electrical Engineer job with a client in Rochester, NY. Must hold a Bachelor of Science degree in Electrical Engineering is required. This position requires strong communication skills, the ability to learn and adapt in a fast-paced work environment, and an understanding of fundamental engineering principles. Will prepare PLC I/O assignment lists. Salary Range: $100/year to $130/year; The salary may be negotiable based on experience, education, geographic location, and other factors. Electrical Engineer job responsibilities include: • Develop control system architecture diagrams., • Lay out control panels and create electrical schematic designs using AutoCAD., • Specify control system equipment, including electrical panel components and motor control center hardware., • Prepare control system assembly documentation, including bill of materials, wire list, and installation scope of work., • Provide direct support to clients on new and existing systems., • Develop network designs and specify industrial data center equipment., • Commission control systems as part of a startup team at client locations throughout the _, • Travel (20-25%) throughout the U.S. is required. The amount of travel varies based on project assignments, project location, and level of responsibility Desired Qualifications: • Bachelor of Science degree in Electrical Engineering is required, • Minimum 5 years’ related experience, • AutoCAD drawing experience is required, • Experience in process engineering and control system integrations, • Must be open to travel. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 585-490-8656 or gina.manioci@_ Equal Opportunity Employer/Veterans/Disabled Benefits offerings include but are not limited to: • Medical/ Dental/Vision Insurance, • 401k, • Holidays and PTO To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit _. The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Akkodis is seeking a Systems Architect job with a client in Rochester NY. Must hold a Bachelor’s degree Electrical Engineering, Computer Engineering, or a related field to be considered. You will gather and analyze requirements from internal and external stakeholders, including standards documents, to create actionable engineering specifications. Collaboratively design and document system architectures to meet requirements, integrating hardware, software, system interface, and user interface components. Salary Range: $125k. to $155/k. The salary may be negotiable based on experience, education, geographic location, and other factors. Systems Architect responsibilities include: • Lead and participate in the full systems engineering lifecycle, from requirements analysis and design through integration, verification, and validation., • Apply classical engineering principles and rigorous processes to ensure robust, reliable, and maintainable system designs., • Collaborate with cross-functional teams, including hardware, software, and UX/UI designers, to develop integrated solutions., • Act as technical point of contact and subject matter expert for customer interactions regarding system requirements and design., • Architect and design systems with a focus on interoperability, security, reliability, and compliance with industry standards where applicable., • Develop and review technical documentation, including system specifications, interface control documents, and test plans., • Support the development and integration of real-time communications systems, ensuring low latency and high reliability., • Evaluate and implement security best practices, including zero trust architectures and commercial cryptography, to protect sensitive communications., • Participate in design reviews, risk assessments, and troubleshooting activities., • Stay current with emerging technologies and industry trends relevant to company’s mission., • Apply engineering best practices and ensure compliance with quality and regulatory standards., • Assist in troubleshooting and resolving system-level issues throughout product development and deployment life cycle., • Prepare clear technical documentation and communicate project status to diverse audiences., • Drive continuous improvement to products and engineering process by staying current with industry trends and implementing best practices., • Evaluate and assess multiple design approaches, researching available technologies and products as appropriate. Desired Qualifications: • Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related field is required., • Minimum Eight years related experience., • Proven experience in systems engineering with a strong understanding of engineering rigor and process., • Demonstrated knowledge of software and UX design principles., • Experience working in multidisciplinary teams and integrating hardware and software components., • Experience with Modular Open Systems Architecture standards such as the Sensor Open Systems Architecture™ (SOSA®) or similar open standards., • Knowledge of zero trust security models and commercial cryptography., • Hands-on experience with real-time communications system design and implementation., • Familiarity with secure communications protocols and standards., • Experience in defense, public safety, or other mission-critical environments If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 585-490-8656 or gina.manioci@akkodis.com Equal Opportunity Employer/Veterans/Disabled Benefits offerings include but are not limited to: • Medical/ Dental/Vision Insurance, • 401k, • Holidays and PTO To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit _. The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Test Engineer II Are you passionate about designing and supporting robust controls systems for product quality validation? As a crucial member of our engineering department, the Test Engineer II designs and supports electrical and electronic control systems used in manufacturing and final acceptance testing. This role works closely with Mechanical Engineering, Electrical Engineering, and Information Systems teams to develop test equipment, troubleshoot complex electrical systems, improve manufacturing processes, and ensure reliable performance of production equipment and products. The ideal candidate combines strong electrical engineering fundamentals with hands-on experience in industrial controls, automation, instrumentation, and problem-solving within a manufacturing environment. About the Company Connection Technology Center (CTC) is the global leader in the design & manufacture of cutting-edge vibration analysis hardware for machine condition monitoring. As a family-owned & operated business for 30 years, we are proud to play a crucial role in preventing operational disruptions, financial losses, and safety concerns for heavy industry. From small scale manufacturing to Fortune 500 companies in Paper & Pulp, Auto & Steel, Food & Beverage, Pharmaceutical, Mining and many more, our mission is to create products that help ensure seamless operational uptime and contribute to a safer, more efficient manufacturing future. Main Responsibilities · Design and implement automated test equipment and validation systems, particularly for product calibration processes. · Develop electrical schematics, wiring diagrams, and panel layouts. · Provide technical support for production equipment, processes, and troubleshooting activities. · Assist in root cause analysis and corrective actions related to equipment failures and quality concerns. · Create and maintain electrical drawings, bills of materials, technical specifications, and operating procedures. · Develop test procedures and work instructions for production use of test equipment. · Support ISO quality requirements, company documentation standards, and other regulatory requirements pertaining to test equipment. Knowledge, Skills, and Abilities · Strong problem-solving and analytical skills to address challenges in electrical & test systems design. · Flexibility to work in a fast-paced environment and adapt to changing project requirements. · Capability to conduct thorough testing and validation of electrical systems. · Ability to prepare comprehensive documentation, including design specifications and technical reports. · A collaborative mindset and the ability to work effectively as part of a team. · Excellent verbal and written communications skills. · Must be able to work individually as well as in a small team environment. · Strong proficiency in MATLAB, understanding of LabView preferred. · Experience working with NI modules and systems, particularly CRIO. Requirements · Bachelor’s degree in Electrical Engineering, Controls Engineering, or a related technical field. · 2-3 years of experience in electronic design and electronic circuit assembly processes. · Experience in the design, repair, and analysis of electronic & calibration systems. Work Location This in-person position will work out of the Victor, NY facility. Salary Range: Starting at $75,000 annually. Relevant experience and qualifications will be taken into consideration Benefits • Health Insurance, • Dental Insurance, • Vacation Time, • Sick Leave, • 401K plan with Employer Match, • Summer golf membership to Bristol Harbour Private Golf Course How to Apply Please apply here: https://ctconline.com/opportunities/careers-at-ctc/ Connection Technology Center (CTC) is an equal-opportunity employer. NYS law prohibits discrimination because of age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, domestic violence victim status, carrier status, gender identity, prior conviction records, prior arrests, youthful offender adjudications or sealed records unless based upon bona fide occupational qualification or other exception, or any other protected characteristic as outlined by federal, state, or local laws.

About IntegraTouch Founded in 2002, IntegraTouch helps commercial and defense organizations solve demanding technology challenges through software engineering, technology consulting, and specialized talent. We bring people and technology together to strengthen operations, create new capabilities, and turn ambitious objectives into practical results. This opportunity brings that commitment to life: advancing the radio communications systems people rely on when coordination, reliability, and timely decisions matter most. IntegraTouch is seeking a Senior DSP and Embedded Software Engineer whose expertise, curiosity, and leadership can help shape the next generation of defense communications. By connecting algorithm design, embedded software, and real hardware, you will help turn every signal, processing cycle, and available connection into stronger, more dependable capabilities for the people carrying out critical missions. What you will help build • Communications waveforms and real time DSP software that advance radio capabilities., • Efficient embedded C/C++ implementations that balance throughput, latency, memory, and numerical precision., • Simulation and analysis workflows that connect algorithm behavior to performance on target hardware., • Reliable interfaces between software, processors, RF hardware, and FPGA implementations., • Automated tests and repeatable validation methods that help teams identify issues earlier and improve engineering confidence., • Maintainable software architectures that support continued enhancement of communications products. How you will lead • Guide technical planning and development from requirements through integration and testing., • Translate customer needs into engineering decisions that balance performance, schedule, and cost., • Collaborate with software, electrical, RF, FPGA, manufacturing, and test teams., • Mentor engineers, share knowledge, and help resolve technical obstacles., • Strengthen Agile Scrum and DevOps practices through thoughtful improvements to development and testing. Your technical foundation Bring strong experience in embedded C/C++, DSP algorithm development, and digital communications, supported by the ability to lead engineering work from requirements through integration and testing. Relevant expertise includes: • Software defined radio (SDR), waveform development, and digital transmitter or receiver processing., • Modulation and demodulation, synchronization, carrier recovery, and channel estimation., • Digital filtering, FFTs, spectral analysis, and multirate processing., • Equalization, error correction, and communications performance analysis., • Fixed point optimization, multicore processing, multithreading, and real time operating systems., • Hardware and software debugging, FPGA collaboration, and performance optimization. A modern engineering toolkit We value engineers who select tools thoughtfully and can connect experimentation with dependable production software. • C and modern C++ for embedded implementation and performance critical processing., • Python, NumPy, and SciPy for algorithm exploration, signal analysis, reference models, and automated testing., • MATLAB experience for modeling, simulation, and validation, with Simulink experience also valued., • Rust as a complementary skill for memory safety and interoperability with existing C/C++ systems., • GNU Radio and SDR development platforms for relevant prototyping and experimentation., • Git, code review, continuous integration, automated builds, and hardware in the loop testing., • Embedded Linux, real time operating systems, and processor architectures used in demanding communications applications. Additional perspectives we welcome Beyond the core DSP requirements, we are interested in engineers who understand emerging approaches and can assess where they offer practical value: • AI and machine learning applied to signal classification, interference detection, test data analysis, or engineering optimization., • Familiarity with PyTorch or comparable frameworks for evaluating signal processing research concepts., • Software defined networking (SDN), programmable network behavior, quality of service, and traffic prioritization where they intersect with radio communications., • Adaptive and cognitive radio concepts, spectrum awareness, and techniques for operating effectively under changing channel conditions., • Experience evaluating how experimental approaches can meet the timing, reliability, and resource constraints of embedded systems. Experience and education • Bachelor’s degree in an engineering discipline with at least 9 years of relevant experience developing real time embedded software in C or C++; or, • Graduate degree with at least 7 years of relevant experience; or, • At least 13 years of relevant experience in lieu of a degree. Location and requirements • Onsite in Rochester, New York., • U.S. citizenship is required for this position under applicable government contract requirements. Why bring your expertise to IntegraTouch? Help solve a problem worth your experience. Influence the engineering decisions behind evolving communications capabilities. Share your knowledge with a multidisciplinary team and see your ideas progress from analysis to code to working hardware. We are looking for someone who is excited by what better communications can make possible, and ready to contribute to building it. Apply with your resume. We would welcome a conversation about the engineering challenges you have solved and what you want to contribute next.

Eastman Kodak Company is looking for a Control Technician to join our team in Rochester, NY. We are seeking an individual with the background to be successful supporting our ESTAR Manufacturing Operations located within Eastman Business Park in Rochester, NY. Responsibilities: • Provide technical support for the operation, maintenance and continuous improvement of manufacturing instrumentation and process control systems., • Work closely with operations, process engineers, and maintenance to understand the business and user needs and priorities., • Provide full life cycle support of control systems in the area, including developing requirements, programming support, commissioning, and ongoing hardware and software maintenance., • Support upgrade projects for existing Reliance Automax Machine Coordinated Drive Control Systems including identifying system hardware and software architecture improvement opportunities., • Provide hardware and integration support for Ethernet based control systems in the plant IT environment., • Work with maintenance to develop data driven reliability improvement opportunities, as well as troubleshoot system hardware, resolve software malfunctions, and assist in system improvements and software upgrades., • Implement improvements in systems capabilities that will increase the ability to meet customer requirements, including safe and reliable operations, and improve business competitiveness. Qualifications: • Associates degree in Electrical Engineering or Electro-Mechanical Technology (Mechatronics) or Equivalent Experience, • Knowledge and understanding of Rockwell Automation PLC's and Process Control DCS, • Communication skills; ability to interact with operator/mechanics/process engineers/staff/management, • Knowledge of Rockwell VFD’s, their application and configuration, • Ability to complete work independently and through influence, • Ability to lead and participate on teams, including outside contractors, • Ability to configuring, documenting, and troubleshooting control systems

Akkodis is seeking aIT Systems Support Technicianjob with a client in Rochester, NY. Must hold a Bachelor degree in an IT related field to be considered. Will be handling incoming requests via phone, email, and chat, while delivering great customer experience. Will perform remote or onsite troubleshooting of Windows or Mac systems as well as determine the best solution based on the issue and details provided by customers. Salary Range: $18/Hr. to $28/Hr. The salary may be negotiable based on experience, education, geographic location, and other factors. IT Systems Support Technician responsibilities include: • Front-Line Triage & Support: Diagnose and resolve Tier 1 technical issues via phone, email, live chat, and remote support tools., • Systems Administration: Assist with user onboarding/offboarding, password resets, permissions, and software deployment in Microsoft 365 and Active Directory/Entra ID environments., • Hardware & Network Triage: Troubleshoot desktop hardware, workstations, peripherals, basic local network issues (Wi-Fi, routers, switches), and printers., • Regional On-Site Dispatch: Drive the company car to client sites in Western NY for hardware setups, cable management, or hands-on troubleshooting as needed., • Ticket Management: Maintain clear, real-time ticket logs and document solutions in our internal knowledge base Desired Qualifications: • Bachelor’s degree in IT Related field is required., • Minimum One years Related Experience., • Experience in Windows desktop OS skills (Windows 8.1/10/11), • Experience in Windows Office application suite skills, • Apple MacOS skills, • : Windows (Server 2012/2016/2019/2022) is required, • Network, UTM, Firewalls, Inter-intranet experience is required, • MSO365 and Google Workspace are required., • Must hold a valid Driver's License with a clean driving record If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 585-490-8656 or gina.manioci@akkodis.com Equal Opportunity Employer/Veterans/Disabled Benefits offerings include but are not limited to: • Medical/ Dental/Vision Insurance, • 401k, • Holidays and PTO To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit _. The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

THIS POSITION IS LOCATED IN ROCHESTER, NY. THE RATE OF PAY IS $120-170K YEARLY. The Bell Company is a large EMPLOYEE-OWNED Mechanical Contractor that takes on some of the most complex projects in our East Coast Market. This is your chance to become a part of this dynamic team and work towards the mutual success of the project, the company, your co-workers and yourself. THE OPPORTUNITY: Mechanical Virtual Design Manager (VDM)/BIM Manager As a Mechanical Virtual Design Manager (VDM)/BIM Manager with The Bell Company, you will have the opportunity to use your skills to work on hospitals, laboratories, and large industrial projects. Additional information on all our projects can be found on our website: www.thebellcompany.com PAY RANGE: $120-170K/YEAR FOR MECHANICAL VIRTUAL DESIGN MANAGER(VDM)/BIM MANAGER THE BENEFITS: At the Bell Company we believe in rewarding members of our teams with more than just a competitive rate. We also offer: • Being part of an EMPLOYEE-OWNED COMPANY with the company contributing stock in the anticipated value of 3% to 6% of your gross (ESOP program) as well as an annual bonus program for all employees. Both programs are subject to vesting and/or company performance., • Ongoing professional training and development, • Opportunities for advancement, • Defined annual bonus program based on Company performance, • Employer paid $50,000 life insurance, • Elective medical with 75% employer contribution, dental and supplemental benefits are available immediately, • 401 (k) program with 3% employer grant, • Paid vacation, • Paid holidays, • Relocation assistance available REPORTS TO: • Executive, per the Company Organization chart PAYROLL CLASSIFICATION: • This position is a Salaried Exempt Position (Executive) JOB REQUIREMENTS: The ideal candidate for our Virtual Design Manager (VDM)/BIM Manager will have previous experience leading a coordination effort and have hands-on experience in the Mechanical trades. KEY SKILLS: • REVIT, SYSQue and Navisworks, • AutoCAD, • Field and 3D Coordination, • Management PREREQUISITES: • 10 years of Experience in the detailed drafting and coordination of complex mechanical projects, • Proven ability to schedule on a department level and monitor and maintain the same., • Demonstrated experience with Computer Programs/Systems used in the drafting, coordination, collision verification and fabrication spooling., • Displays leadership capabilities and can supervise BIM Coordinators in the Corporate Office, Regional Offices and remote project locations., • A good understanding of Bell policies and procedures, • Ability to read and interpret Contract documents, modeled construction documents and specifications., • Ability to plan and organize activities, • Experience is required with equipment typical for Mechanical, HVAC Process Systems, and Advanced Plumbing Systems. DUTIES: • Maintain the ethics and professionalism of The Bell Company in the execution of the duties and responsibilities of the position., • Maintain Bell Standards so all projects and systems that we use operate identical to every Bell project., • Monitor Lead Coordinators in Regional offices to assure they are coordinating and supervising all BIM coordinators assigned to the regional office or project sites in the region. COMMUNICATION • Provide leadership and vision for the department, • Maintain open communications between home office and Bell’s field management staff., • Create a team atmosphere where everyone in the BIM department understands the goals and how their involvement in the project is vital to its success. BIM SCHEDULE • Provide projects man hours and durations for schedule development and ensure team wide understanding of the BIM requirements for a project., • Consistently maintain or exceed scheduling expectations, • Provide to the project team the plan of the schedule for drawing completion and progress against that plan RESOURCES • Supervise all BIM staff for conformance with position descriptions and the Company Policy and Procedures., • Integrate the BIM personnel as part of the dynamic project team., • Assure that all work hours are documented daily and are accurate, • Provide BIM personnel support as required by project schedule, • Assist in Identifying, recruiting and evaluating BIM candidates for open positions. TRAINING • Assure that every individual assigned to a project is adequately trained in all software and procedures., • Provide Training and Supervision of in-house BIM users for all upgrades, program modification and procedure changes., • Secure outside training as required to maintain an industry leading group. HARDWARE/SOFTWARE • Maintain optimum BIM Hardware and Software inventory, • Negotiate competitive pricing of BIM software purchases and maintenance contracts, • Order & maintain plotter supplies, • Provide support for plotting and electronic file submissions, • Provide technical support for all BIM software, • Coordinate with IT to facilitate integration, upgrades and licensing., • Train Coordinators in files set up and support for the Trimble field layout system. COST CONTROL • Responsible for developing and then maintaining project BIM cost/budgets, • Provide a budget for all BIM technology items, • Provide and manage a budget for training with a well-defined scope, • Review BIM operator progress on a routine basis to ensure productivity. QUALITY CONTROL • Develop and maintain the Revit Family Library, • Develop specification and material databases internal to Revit software, • Customization of Revit programs to optimize customer requirements and the Bell Company productivity, • Develop, implement and enforce Revit/BIM standards, • Routinely communicate with the projects about the accuracy of the model and drawings FILES • Develop and maintain document control procedures and control of all Revit and Navisworks files, • Maintain up-to-date drawing records per Company standards, • Organize the Revit/BIM virtual environment, • Maintain Revit/BIM document archive and retrieval for projects, • Audit and purge Revit files for project closeout PROJECT CLOSEOUT • Provide as-built drawings in the format and detail required by the contract documents. ADDITIONAL REQUIREMENTS • Dedicated, self-motivated with good verbal and people skills., • Demonstrate a stable work history., • Able to prioritize and work independently., • Pass a pre-employment drug screening., • Willing to work all hours and schedules assigned. The Bell Company is an Equal Employment Opportunity Employer. Minorities, Women, Disabled and Veterans are encouraged to apply. Our focus marketplace is the Heavy Construction Industry (Mechanical Piping) and PLUMBING If you have experience in the following disciplines, we want to hear from you!

Eastman Kodak Company is looking for a Control System Engineer to join our team onsite in Rochester, NY. We are seeking an individual with the background to be successful supporting our Film Finishing Operations located within Eastman Business Park in Rochester, NY. Responsibilities: • Provide technical support for the operation, maintenance and continuous improvement of manufacturing instrumentation and process control systems., • Work closely with operations, process engineers, and maintenance to understand the business and user needs and priorities., • Provide full life cycle support of control systems, including developing requirements, programming support, commissioning, and ongoing hardware and software maintenance, from the control room to the field instrumentation., • Support upgrade projects for existing Rockwell Automation, Modicon PLC based control systems, Emersion Drive Control Systems including identifying system hardware and software architecture improvement opportunities., • Provide hardware and integration support for Ethernet based control systems in the plant IT environment., • Work with maintenance to develop data driven reliability improvement opportunities, as well as troubleshoot system hardware, resolve software malfunctions -Lead capital system improvements and software upgrades for highly automated web conveyance and packaging equipment. • Implement improvements in systems capabilities that will increase the ability to meet customer requirements, including safe and reliable operations, and improve business competitiveness, using Six Sigma methodology as applicable. Qualifications: • Bachelor’s degree in Electrical Engineering or Electro-Mechanical Technology (Mechatronics), • Knowledge and understanding of Rockwell Automation PLC's and drive systems., • Communication skills: ability to interact with operator/mechanics/process engineers/staff/management, • Knowledge of Rockwell VFD’s, their application and configuration, • Ability to complete work independently and through influence, • Ability to lead and participate on teams, including outside contractors, • Ability to configuring, documenting and troubleshooting control systems

Introduction Visium Resources has been asked to identify qualified candidates for this Senior Software Verification and Validation Engineer position. This position is a direct hire opportunity which is expected to be on-site at clients facility in Rochester, New York. Laboratory / Testing Commitment: Approximately 70% hands-on testing and validation activities. Summary We are seeking an experienced Senior Software Verification and Validation (V&V) Engineer to support the development, integration, verification, and validation of medical devices, diagnostic systems, laboratory instrumentation, and associated software. The ideal candidate will have strong experience working in a regulated medical device, diagnostic, laboratory, or life sciences environment, with a background in software and system verification and validation. This position will support new product development, software and instrument integration, technology transfer, system-level verification, software validation, and post-launch product support. The engineer will work across hardware, software, systems, laboratory, quality, and engineering functions throughout the product development life cycle. This is a hands-on V&V position, not a role focused solely on writing test documentation. Approximately 70% of the position will involve hands-on testing, system/software validation, troubleshooting, and laboratory activities. Medical Device V&V Candidates should understand the principles of verification and validation within a regulated medical device or diagnostic development environment. Experience with the following is highly desirable: • Design verification, • Design validation, • Software validation, • Requirements management, • Traceability, • Risk-based verification, • Test protocol development, • Test execution, • Defect management, • Change control, • Configuration management, • Design controls, • Product development life cycle processes, • Post-market or post-launch product support Key Responsibilities • Develop and execute verification and validation strategies for medical devices, diagnostic systems, laboratory instruments, and associated software., • Develop and execute software and system-level test plans, test protocols, test cases, and test procedures., • Perform verification and validation throughout the medical device/product development life cycle., • Translate system, software, and user requirements into measurable verification and validation activities., • Establish and maintain requirements traceability between requirements, risk controls, test cases, test execution, and test results., • Perform hands-on testing of integrated medical device systems, instrumentation, software, and subsystems., • Execute software validation testing, including functional, system, integration, regression, and negative testing as appropriate., • Evaluate software/hardware interfaces and system integration to identify unexpected behavior, defects, or performance issues., • Document test results, deviations, anomalies, defects, and conclusions in accordance with established quality procedures., • Troubleshoot failures and unexpected test results and work with engineering and software development teams to identify root causes and corrective actions., • Participate in defect investigation, resolution, retesting, and regression testing., • Support design verification, subsystem validation, system validation, and post-launch product support., • Generate and review requirements, specifications, test procedures, protocols, and validation documentation for completeness and technical accuracy., • Review the work of other engineers and provide feedback regarding testing quality, documentation, and requirements traceability., • Support technology transfer and new product introduction activities., • Work with multidisciplinary teams consisting of software, systems, electrical, mechanical, laboratory, quality, regulatory, and product development personnel., • Support configuration and installation of software and computer systems used in testing., • Participate in software/test automation activities where appropriate., • Develop or utilize scripts to support automated testing, data collection, test execution, and analysis., • Adapt quickly to changing project priorities and support multiple projects as required. Software Verification & Validation Experience working with software embedded in or supporting medical devices, diagnostic instruments, laboratory systems, or regulated equipment is highly desirable. The successful candidate should have experience with software verification and validation within a regulated product development environment. Experience may include: • Software requirements verification, • Software functional testing, • System integration testing, • System-level verification, • Software validation, • Regression testing, • User requirements verification, • Interface testing, • Installation and configuration testing, • Automated testing, • Defect identification and tracking, • Test script development, • Test execution and results analysis, • Requirements traceability, • Risk-based testing, • Software/hardware integration testing Required Qualifications Education • Bachelor's degree or higher in Systems Engineering, Software Engineering, Computer Science, Electrical Engineering, Mechanical Engineering, Biomedical Engineering, or a related engineering/science discipline., • Equivalent combination of education and directly relevant experience may be considered. Experience • Typically 15+ years of relevant engineering, software V&V, systems V&V, medical device validation, or regulated product development experience; candidates with strong directly applicable experience may be considered with fewer years., • Demonstrated experience with medical device, diagnostic, laboratory, or other regulated products., • Experience developing and executing verification and validation testing., • Experience creating and maintaining requirements traceability., • Experience working within a structured product development and quality environment., • Experience troubleshooting complex software/hardware systems. Technical Skills • Strong understanding of software verification and validation methodologies., • Strong understanding of system-level verification and validation., • Experience translating requirements into testable acceptance criteria and test cases., • Strong technical documentation skills., • Strong analytical and troubleshooting abilities., • Experience with software and system integration testing., • Experience with test automation and/or automated data collection., • Basic programming or scripting experience using technologies such as:, • Python, • VBA, • C/C++, • Other scripting or programming languages, • Experience configuring and installing computer systems and software used for testing., • Understanding of cybersecurity considerations within medical devices, laboratory systems, or connected equipment is beneficial. V&V / Quality Systems Experience Experience with regulated development processes and quality systems is highly desirable, including familiarity with: • Medical device design controls, • Software development life cycle processes, • Requirements management, • Risk management, • Configuration management, • Change control, • Defect management, • Traceability, • Verification and validation documentation, • Quality management systems, • Regulated product development Development & Quality Tools Experience with one or more of the following is preferred: • Jira, • Windchill, • HP ALM / Quality Center, • Serena Business Mashups, • Aligned Elements, • Microsoft Team Foundation Server (TFS) Preferred Qualifications • Experience with medical device software validation., • Experience validating software embedded within medical devices or diagnostic instruments., • Experience with laboratory information systems, diagnostic systems, or laboratory automation., • Experience with clinical or diagnostic analyzers., • Experience with automated laboratory analyzers, including VITROS® systems, is a plus., • Experience with software test automation., • Experience with Python, VBA, C/C++, or similar programming/scripting languages., • Experience with assay/instrument integration., • Experience supporting technology transfer or new product introduction., • Experience working in a regulated medical device, diagnostics, or life sciences environment. Key Attributes The successful candidate will be: • Hands-on: Comfortable spending significant time executing tests rather than working exclusively on documentation., • Technically strong: Able to understand interactions between software, hardware, instrumentation, and systems., • Detail-oriented: Able to produce accurate, audit-ready V&V documentation and maintain rigorous traceability., • Analytical: Able to investigate failures, identify potential root causes, and work with development teams toward resolution., • Adaptable: Comfortable moving between projects as priorities change., • Collaborative: Able to work effectively with software, systems, engineering, quality, laboratory, and regulatory teams., • Independent: Capable of developing and executing V&V activities with appropriate judgment and minimal supervision. Work Environment This is a full-time, onsite position in the Rochester, NY area. Candidates must be willing and able to commute to the facility daily. Approximately 70% of the role will involve hands-on testing and validation activities, with the remainder involving test planning, requirements review, documentation, data analysis, defect investigation, meetings, and cross-functional engineering activities. Ideal Candidate Profile The ideal candidate is a senior-level Medical Device V&V Engineer, Software Validation Engineer, Software V&V Engineer, Systems V&V Engineer, or Medical Device Systems Engineer who has experience validating software and integrated systems within a regulated product development environment. Strong candidates may come from backgrounds including: • Medical devices, • Diagnostic instrumentation, • Clinical laboratory systems, • Laboratory automation, • Embedded medical device software, • Regulated electromechanical systems Candidates should be able to demonstrate hands-on experience developing and executing V&V testing-not simply writing test cases or managing V&V documentation.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Associate, Production Planning Job Code: 41242 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked, and have every other Friday off Job Description: As a new graduate in the production planning role, you will assist in planning, scheduling, and monitoring manufacturing status and approval of products through the entire production cycle to meet production, and ultimately customer, requirements. You will work from engineering plans and production specifications to ensure timely provision of materials. Additionally, you will advise management on the status of work in progress, coordinate with manufacturing, quality, and supply chain teams, and interface with engineering, program management, and external customers. Your responsibilities will include ensuring the availability of materials and labor to meet production needs and delivery commitments, as well as resolving labor and material shortages, backlogs, and other potential schedule interruptions. Essential Functions: Develop and implement manufacturing build plans to meet customer contractual delivery schedules Utilize Materials Requirement Planning (MRP) system to input Master Schedule build plans, track material availability, status kit readiness, release shop orders, and maintain all shop order records and inventory integrity Update and maintain make items lead times within MRP system Manage floor stock of program components Work jointly with Manufacturing and Quality teams to execute build schedule and address any issues in a timely manner Work with Materials Planners to proactively manage the schedule and material dock dates to ensure accuracy of planning Provide hardware status, updates and performance statistics to program team based on status of hardware through Manufacturing Execution System (MES) Qualifications: To be eligible, applicants must be pursuing a bachelor's degree in supply chain management, Logistics Management, Manufacturing Engineering, Industrial Engineering, Business Administration or related field or have completed their bachelor's degree within the last 12 months, regardless of age. In compliance with pay transparency requirements, the salary range for this role in Virgina is $46,500 - $86,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) . For information regarding your Right To Work, please click here for English (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRights1020.pdf) or Spanish (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRightsSp1020.pdf) .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Associate, Systems Engineering Job Code: 41239 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked, and have every other Friday off Job Description: Perform operational analysis and develop concept of operations, design and implementation plans Develop test plans, procedures & cases Conduct tests and document results Use software tools, scripting and software/hardware troubleshooting Analyze systems requirements from end systems and users Supports development and evaluation of complex system designs and architectures Develop and deliver presentations to communicate design activity plans and status to internal and external customers Qualifications: To be eligible, applicants must be pursuing a Bachelor's degree in Systems Engineering, Electrical Engineering, Mechanical Engineering, Computer Engineering, Computer Science, Physics, Mathematics, Aviation, Aerospace Engineering, or related field or have completed their Bachelor's degree within the last 12 months, regardless of age. In compliance with pay transparency requirements, the salary range for this role in New York state is $62,000 - $115,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) . For information regarding your Right To Work, please click here for English (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRights1020.pdf) or Spanish (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRightsSp1020.pdf) .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer-RF Job Code: 40873 Job Location: Rochester, NY Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week Job Description: The successful candidate will join a team of dedicated professionals who are responsible for supporting military communication products from pre-release to obsolescence. As a member of the Product Support Engineering team you will be tasked with investigating a variety of problems including RF/Analog, digital, assembly, SMT and test related. You will collaborate across multifunctional teams to diagnose problems to component level, determining solutions via simulation and experimentation and implementing corrective actions. As new products are launched you will interface with design engineering, assisting with root cause analysis, troubleshooting of prototypes and ensuring a successful launch into full rate production. Typical tasks include: Mitigating component shortages through qualifying alternatives or redesigning circuits and sub-assemblies. Determining design, process, and test improvements to increase test yields and product quality. Working in cross-functional teams to meet manufacturability, testability and other DFx requirements for volume production. Working with design engineering and manufacturing teams to introduce new designs into manufacturing. Working with design engineering to make necessary circuit changes prior to and during the launch of new products. Working to mitigate component obsolescence throughout the product lifecycle. Provide guidance to junior staff. Assisting them as they investigate problems. Leading investigations and coordinating tasks. Working with vendors, Quality and Supply Chain to address material discrepancies. Troubleshooting unit, modules, and boards to the component level. Essential Functions: Hardware troubleshooting ability including analog and RF components and circuits. Ability to work independently with general supervision. Ability to design and conduct engineering experiments and act upon test results. Design and analysis of circuits and components utilizing ADS, Matlab and various design and simulation tools. Experienced in leading small technical design or troubleshoot team, providing direction and prioritizing tasks to meet target yields and shipments. Generate and deliver presentations for various levels of management regarding issues, investigations, improvements or cost savings in a concise manner. Ability to work in a fast-paced environment interfacing with multiple teams across the organization. Ability to use typical lab equipment: Oscilloscope, DMM, Spectrum & Network analyzers, and signal generators. Must be a quick learner, able to problem solve and be self-motivated. Able to analyze designs and communicate technical information to support staff. Ability to Obtain a US Security Clearance Qualifications: Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience in RF. 4+ years of RF experience. Preferred Additional Skills: Electrical engineering degree. Experience with tactical Radio and Power Amplifier HW. Experience troubleshooting to component level. Working knowledge of LabVIEW, ADS and Jira. Experience with MS Office including advanced spreadsheet manipulation and presentation creation. Excellent communication and interpersonal skills with all levels of organization & supplier base. In compliance with pay transparency requirements, the salary range for this role in New York State is $90,500 - $168,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) . For information regarding your Right To Work, please click here for English (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRights1020.pdf) or Spanish (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRightsSp1020.pdf) .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Systems Engineering (Network Engineering) Job Code: 40616 Job Location: Rochester, NY Job Schedule: 9/80 - Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off This Sr. Specialist position will have a critical role in delivering advanced engineering support for L3Harris' next-generation tactical communication solutions. Working directly with customers in operational environments, providing high-level technical support, system integration, and proactive problem resolution while serving as a key technical liaison back to Systems Engineering, Product Engineering, Product Management, and Sales. This role is well-suited for technically strong, hands-on engineers who enjoy solving complex networking problems, working close to real-world deployments, and contributing to the evolution of innovative tactical communications systems. The successful candidate will integrate, troubleshoot and support deployment of wired and wireless networked systems, with a strong emphasis on IP-based networking, routing, and tunneling technologies. The role will require both real time troubleshooting and issue resolution as well as proactive problem solving by identifying risks, improving configurations, and sharing knowledge across teams to drive continuous improvement and customer success. Essential Functions: Provide advanced technical support for tactical communication systems in lab, field, and customer environments Develop SME knowledge on the features and use cases of our suite of tactical waveforms. Manage and resolve complex customer incidents and technical escalations Perform hardware and software system integration of wired and wireless network solutions Design, configure, and troubleshoot IP-based network architectures using fielded tactical radio solutions. Apply and support networking technologies including VLANs, redundancy protocols (e.g., VRRP), Routing Protocols and tunneling solutions. Proactively identify potential system or network issues and recommend preventative or corrective actions Serve as a technical liaison between customers, Product Engineering, Program Management, and Sales Accurately document findings and contribute to internal knowledge sharing, training materials, and best practices Support continuous improvement by providing customer feedback and operational insights to product teams Travel domestic and internationally approximately 50% Qualifications: Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience. Preferred Additional Skills: Hands-on experience with: Network tunneling technologies (e.g., GRE, IPsec, ZeroTier or equivalent) Fielded Applications (e.g., TAK, ICE, InstantConnect) Experience supporting tactical, RF, or mission-critical communication systems Technical proficiency with wideband networking technologies, including but not limited to ANW2C, Wren-TSM, and Wraith, with a capacity to adapt to new and evolving communication systems. Enjoy working with people, developing relationships and sharing knowledge. Experience contributing to technical documentation, training, or customer enablement Interest in emerging technologies and contributing to new product capabilities early in their lifecycle Understanding of Tactical Radio Communications, including RF propagation, frequency planning/spectrum management, antenna and system component selection and trade studies. Prior Military or worked in a military environment with a working knowledge of military asset use cases, maneuvers, command structures, and signals doctrine. Experience participating in and supporting exercises on military installations, interacting with enlisted and officer personnel. Comfortable working in fast-paced, evolving technical environments CCNA Certification(s) Strong foundational knowledge of IP networking concepts and protocols Experience integrating and supporting networked systems across wired and wireless environments Working knowledge of routing, switching, and basic network security principles Ability to perform root cause analysis and troubleshoot complex, multi-layer technical issues Direct customer and end-user interaction experience, proven and effective communications skills, interpersonal skills and customer focus are a must. Willingness to travel in support of customer engagements and field activities * US Government Secret security clearance or ability to obtain. In compliance with pay transparency requirements, the salary range for this role in New York State is $92,500 - $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-RK2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) . For information regarding your Right To Work, please click here for English (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRights1020.pdf) or Spanish (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRightsSp1020.pdf) .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Electrical Engineering Job Code: 43477 Job Location: Rochester, NY Job Schedule: 9/80 (Every other Friday off) Job Description: This Electrical Engineer will be responsible for leading and guiding the development of complex electronics hardware and subassemblies for a variety of seabed applications. The position requires prior experience in digital and analog circuit design, CCA and subsystem integration, and system qualification and test. The position presents a tremendous opportunity for exposure and growth, involving communication with internal and external customers and stakeholders to explain and influence changes to practices, processes and approaches. Essential Functions: Applicable experience in electrical, electro-mechanical design, tooling/fixture design Strong communication skills (verbal and written) for internal and external presentations and reviews. Communication includes within and outside of own function to gain cooperation on operational processes, practices, and procedures. Candidate must work well as part of a team Responsible for architecting, designing, developing, modifying, evaluating and integrating electronic circuit cards, electronic parts, components, or integrated circuitry for complex, high performance seabed hydrophone systems. Creates Analog and Digital designs of electro-mechanical systems and control systems Analyzes electrical requirements to determine feasibility of design within time and cost constraints Responsible for providing input to program bids and generating bases of estimate Able to identify component operational characteristics that may impact system performance and or sustainability Qualifications: Bachelors of Science in engineering and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: Proficient in LTSpice, Cadence/Allegro PCB Designer, Mentor Graphics Proficient in technical writing to include Electrical test procedures, specifications, white papers, design reviews and technical presentations. Secret or Top Secret SCI or DoD clearance In compliance with pay transparency requirements, the salary range for this role in New York state is $80,500.00 - $149,500.00 This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-KB1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) . For information regarding your Right To Work, please click here for English (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRights1020.pdf) or Spanish (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRightsSp1020.pdf) .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer Job Code: 40874 Job Location: Rochester, NY Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week Job Description: The successful candidate will join a team of dedicated professionals who are responsible for supporting military communication products throughout their lifecycle. As a Product Support Engineer you will be tasked with investigating a variety of problems related to Analog, Digital, and RF. Candidates with experience in any of these areas will be considered. Working from our lab adjacent to manufacturing you will collaborate across multifunctional teams to diagnose problems to component level, determine solutions via experimentation and simulation and implement corrective actions. As an extension of design engineering, you will have the opportunity to learn and grow while providing electrical engineering support to technicians and junior engineers. As new products are launched you will interface across engineering, assisting with root cause analysis, troubleshooting of prototypes and ensuring a successful launch into full-rate production. Typical tasks include: Monitoring daily factory yields, investigating failures, and determining corrective actions. Mitigating component shortages through selecting and qualifying alternatives or redesigning circuits and sub-assemblies. Determining design, process, and test improvements to increase test yields and product quality. Working as part of a cross-functional team to meet manufacturability, testability and other DFx requirements for volume production. Working with other engineering teams to make necessary circuit changes prior to and during the launch of new products. Working to mitigate component obsolescence throughout the product lifecycle. Provide guidance to junior staff by providing assistance as they investigate problems. Lead investigations, coordinate tasks, and direct junior staff as required. Work with Quality and Supply Chain to address material discrepancies. Troubleshooting unit, modules, and boards to the component level. Support digital and related analog hardware designs. Perform detailed analysis of analog, digital and/or RF circuitry. Essential Functions: Hardware troubleshooting ability to component level for analog and digital circuits. Ability to work independently and within a team setting. Ability to design and conduct engineering experiments and act upon test results. Design and analysis of circuits and components utilizing various simulation tools. Experienced in leading small technical design or troubleshooting team, providing direction and prioritizing tasks to meet target yields and shipments. Ability to work in a fast-paced environment interfacing with multiple teams across the organization. Ability to use typical lab equipment: Oscilloscope, DMM, Spectrum & Network analyzers, logic analyzers and signal generators. A driven person that wants to learn and is a proven problem solver. Able to analyze designs and communicate technical information to support staff. Ability to obtain a US Security Clearance. Qualifications: Bachelor's EE Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience in Electrical Engineering. Preferred Additional Skills: Experience with tactical radios is a plus. Experience reading schematics and datasheets, probing circuits and understanding proper circuit operation. Troubleshoot circuit assemblies to component level Ability to select alternate electronic components and know what testing is required to qualify them. Working knowledge of LabVIEW and Jira a plus. * Experience in a manufacturing environment is a plus. In compliance with pay transparency requirements, the salary range for this role in New York State is $92,500 - $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) . For information regarding your Right To Work, please click here for English (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRights1020.pdf) or Spanish (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRightsSp1020.pdf) .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead Software Engineer Job Code: 42047 Job Location: Rochester NY or Lynchburg VA Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked, and have every other Friday off Job Description: L3Harris Technologies is seeking a Lead Software Engineer (Level 5) to Join the devices team developing next-generation radio platform software. This critical role sits at the intersection of complex embedded real-time software engineering and modern, cutting-edge AI-driven development methodologies. As a technical leader, you will design robust architectures for tactical communications while leveraging AI tools to accelerate the software development lifecycle (SDLC). The ideal candidate brings mastery of embedded Linux and Android operating systems, along with a passion for driving engineering excellence in a collaborative Agile Environment. Essential Functions: Lead Architecture Design: Architect and design robust, next-generation software platforms for complex embedded tactical communication devices. Drive AI Integration: Pioneer and implement AI-driven development methodologies to accelerate and optimize the full software development lifecycle. Execute OS Development: Develop, customize, and maintain core software utilizing embedded Linux and Android operating systems. Provide Technical Leadership: Guide engineering teams, foster a collaborative Agile environment, and champion technical excellence across the devices team. Ensure Real-Time Performance: Optimize complex, low-level real-time software to meet strict tactical performance, safety, and reliability standards. Qualifications: Bachelor's Degree and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. Preferred Additional Skills: Deep understanding of tactical radio communication protocols, digital signal processing (DSP), and waveform design. Experience with Linux kernel modification, custom U-Boot configuration, and hardware debugging tools (e.g., JTAG, oscilloscopes, logic analyzers). Familiarity with Android Open-Source Project (AOSP) customization or Android HAL (Hardware Abstraction Layer) development. Strong background in automated test environments, continuous integration/continuous deployment (CI/CD) pipelines, and DevOps workflows Leadership: 2+ years of experience acting as technical lead. Core Languages: Expert-level proficiency in C and modern C++ for real-time operating systems (RTOS) and embedded environments. Operating Systems: Proven hands-on track record developing embedded software architectures utilizing Linux and Android distributions. AI Tooling: Practical experience integrating generative AI or AI-assisted development tools within a professional software environment. In compliance with pay transparency requirements, the salary range for this role in New York and Virginia (outside of Greater D.C. area) is $117,000 to $218,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-RK2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) . For information regarding your Right To Work, please click here for English (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRights1020.pdf) or Spanish (https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRightsSp1020.pdf) .

We are seeking an experienced Desktop Support Technician to provide on-site technical support and troubleshooting for end-user hardware, software, and network-related issues for our client. Upgrade operating systems and software.

Anduril's Space team is expanding our AI-powered capabilities into the final frontier, enhancing Space.Domain Awareness, Space Control, and Command and Control for U.We're developing fully integrated hardware and software systems, including Lattice for Space Missions.Rendezvous and proximity operati

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods — and eventually people — move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality. As a Radar Systems Engineer, you will be a part of our Radar Engineering team. The Radar Engineering team is comprised of a small cross functional team of motivated and experienced engineers; we’re responsible for designing, building, and testing cutting edge phased array radar systems from concept to certified product. We enjoy a culture of sharing information and collaboration. Phased array radar systems have historically been reserved for specialized applications, but we’re making this technology affordable to enable Detect and Avoid for widespread commercial applications. This role will focus on new advanced operational modes. The passion for revolutionary technology to make aviation safer motivates us to come in every day. Responsibilities In your role as a Radar Systems Engineer, you will be responsible for analyzing phased array radar systems and developing radar processing algorithms to enable short, long range object tracking, and radar image generation. You will be involved in all phases of development from conception to production, designing your algorithms in Matlab, Python, and implementation in C++ on the target hardware. You will drive the system-level requirements of the phased array radar system, and drive trade studies collaborating with the cross functional teams. You will support the integration of the radar on the aircraft and support data collection and analysis during flight testing. You will be the owner of real-time processing of radar algorithms on an FPGA, DSP-based platform. Basic Success Criteria Electrical Engineering fundamentals, typically gained through a Bachelor’s Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or a related discipline 8+ years of professional hands-on experience with Radar algorithms, radar system design, radar signal processing, integration, and test of a radar system Ability to use C++, Matlab and Python (Python preferred) Ability to troubleshoot, find root cause, and resolve issues Pulsed and FMCW processing algorithm development Experience in airborne radar testing and development Preferred Criteria Advanced Degree of Science or Electrical Engineering Experience developing system architectures and managing requirements for certification of Avionics Creative problem solver that can bring multiple disciplines together, with the ability to assess risk and make design and development decisions without all available data Experience integrating and troubleshooting various electronic sensors and components Weather radar experience, airborne or ground-based Real beam radar imaging, and or SAR processing This role can be remote, or located at our facility in Mountain View, California. Must be willing to travel 30% of the time. The estimated salary range for this position is $180,000 to $260,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity. In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment. This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant’s capacity to perform in compliance with U.S. export control laws. All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis. At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need. If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to work@reliable.co

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods — and eventually people — move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality. As a Mission Systems Engineer at Reliable Robotics, you will be a part of the Systems team and will report to the Systems & Safety Manager. The Systems & Safety Team is responsible for architecting systems that support novel safety-critical functions, establishing development methodologies for new technologies, and complying with the federal regulations. As part of an experienced multi-disciplinary team, you will contribute to expanding the aircraft's mission and functional capabilities. Your first-hand pilot experience and your engineering experience in design and development will further strengthen the team's ability to meet rigorous expectations of stakeholders and certification authorities. You will collaborate with members from other groups within Reliable Robotics to develop new and novel systems necessary for unmanned aircraft operations. Responsibilities In your role as a Mission Systems Engineer you will contribute to the development of prototypes and certifiable safety-critical flight systems in a dynamic start-up work environment Define and document mission-related aspects of future aircraft operation using insight from a pilot’s perspective Define and communicate strategies and plans for type certification and operational approval Develop training and support documents needed to deploy autonomous systems in an operational environment Support system architecture development and assess trade-off studies regarding performance, complexity, risk, and effort Capture system requirements and interfaces to drive avionics hardware and software development Perform operational safety assessments in support of experimental and production missions Provide engineering expertise in the design, development, test and validation of vehicle level functions and performances You’ll also have the opportunity to interact with other domains within Reliable Robotics and become involved in a broad task spectrum not limited to typical system engineering activities Basic Success Criteria Bachelor’s Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or related discipline FAA-Certificated Pilot (Commercial, or Airline Transport) or Dispatcher with two or more years of operational experience under 14 CFR § 135, 14 CFR § 121 or Corporate Flight Operations Broad experience from 7+ years of designing various systems, integrations, and testing of complex safety-critical aerospace systems or equivalent technology Preferred Criteria Advanced Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or related discipline Creative problem solver that can bring multiple disciplines together with the ability to assess risk and make design and development decisions based first principles without all available data Experience certifying flight critical systems, hardware, and software via ARP4754A, ARP4761, DO-254, and DO-178C respectively This role is critical to us at Reliable Robotics, because it works to convert the real world challenges of piloting an aircraft into requirements for an aircraft system that flies itself. This role can be remote, or located at our facility in Mountain View, California. Must be willing to travel up to 10% of the time. This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant’s capacity to perform in compliance with U.S. export control laws. All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis. At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need. If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to work@reliable.co

Senior Help Desk TechnicianEmployment Type: Full Time Department: Help Desk CGS seeks a Senior Help Desk Technician to fulfill the requirements of Level 1 & 2 Help Desk (PC Assist) support services to end users consisting of senior management, attorneys, support staff, contractors, and associated systems for the Executive Office for the United States Attorneys (EOUSA). CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Backup/Restoration admin/support- File Server support- User Account/Mailbox administration- Software/Hardware installation- Handheld device installation/troubleshooting/support- Remote User setup/support/troubleshooting- End-user training- Creation of procedural documentation- Creation of spreadsheets/databases for tracking purposes- Record and update required information for all IT-related tickets utilizing ITIL- Creation of Incident work-log entries- Accurately answer user support questions of software and hardware in the EOUSA office environment- Maintain Account Management forms for new and departed users per Government policy and procedures- Produce proactive reports, trending analysis, service level reporting, process consultation and application of ITIL best practices- Conduct and maintain accountable IT inventories such as laptops, desktops, tablet PCs, printers, MFPs’ accessories, IT supplies, etc. using spreadsheets- Provide desk-side training for new employees and staff, consisting of basic instructions on accessing and using standard desktop applications (e.g. e-Mail, Microsoft Office, etc) and how to access available research database applications- Submit weekly status reports and monthly surveys- Set up and support conference and training rooms for presentations including, audio systems, video systems, A/V distribution systems, computer hardware and software, control programming, microphones, amplifiers, encrypted wireless microphone systems, digital recording and computer/video interface- Utilize online meeting applications such as Adobe Connect to support hardware set-up of microphones and webcams, set-up operations for audio mixing boards and facilitate/monitor/record online meeting sessions Qualifications:- One year or more Adobe Connect or related online meeting center set-up experience. Non-Required, advantageous additional knowledge, experience, or competency considered favorable assets shall include: - ITIL Foundations certification - Change Management experience - Active DOD clearance of Level 6 Public Trust or above Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package:- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board:For more information about CGS please visit: or contact:Email: _ #CJ$40,000 - $80,000 a yearWe may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The Desktop Support Technician is responsible for supporting and maintaining the school’s computer systems, including laptops, desktops, and connected peripherals. The Desktop Support Technician will support, diagnose, repair, maintain, install, and upgrade all school hardware and computer equipme

Execute policies and standards, as they relate to IT systems and network security and protocols. Be able to exercise a high degree of discretion when evaluating client's operating systems, hardware configuration, firewalls, security, and network infrastructure. Responsibie for account management, tr

The responsibility of the Digital Press Operator is to operate digital printing equipment to create high quality print copies from a variety of source files. Operate digital color equipment and standard document finishing equipment including guillotine cutter. Use computers to create layouts and printed materials that are sent to printing presses for production. Listen to CSR/Sales specifications and adjust attributes such as size and resolution to create a high-quality finished product. Possess a strong eye for detail and enjoy working with technology. Manage multiple projects with varying timelines. Schedule Rotates every two weeks • A Shift: Monday–Friday, 7:00 AM–3:30 PM, • B Shift: Monday–Friday, 3:30 PM–12:00 AM (Midnight) Essential Functions: • Process Customer Print orders daily., • Prioritize work assignments based on deadlines, overall company workload, machine capability and client needs., • Operate Digital Printing Equipment to create high quality print copies from a variety of source files., • Operate digital color equipment and standard document finishing equipment including guillotine cutter., • Troubleshoot printer issues by performing minor repairs and routine equipment maintenance., • Use software/hardware to complete needed repairs and recognize when a service call is required., • Restock Printing Supplies: paper, toner, labels, and additional printing materials., • Order labels and other components to keep operations going efficiently and on schedule., • Seeks guidance and direction as necessary for performance of duties., • Demonstrates good judgment in investigating problems., • Respects the confidentiality of company information., • Maintains cooperative working relationship with supervisor., • Makes best use of time during the workday., • Consistently shows ability to recognize and deal with priorities., • Performs all duties in an independent manner with little supervision., • Performs all other tasks / duties as may be assigned by their supervisor. Competencies: Digital print operators should have an aptitude for visual color and print design along with strong attention to detail. The following skills are essential to getting the job done: • Print design – digital print operators need to make creative page layouts and process files to send them to a digital press., • Color management – it is essential that digital print operators are well-versed in color theory and processing colors for print graphics., • Computer skills – digital print operators need to be well-versed in various computer programs focused on digital printing., • Troubleshooting – when equipment or printing jobs malfunction, digital print operators need to fix them., • Customer service – clearly presenting print information and interacting with fellow employees is essential for digital print operators., • Time management – multitasking and fulfilling print orders in an organized, timely fashion is a critical requirement for digital print operators. Requirements/Qualifications: • 2+ years of digital printing experience, • Ability to work in a fast-paced production environment., • Ability to work well with co-workers in a team environment., • Ability to operate computer-based technology. Preferred Education and Experience: • High School Diploma or equivalent and/or equivalent professional experience. Physical Demands: • Regularly required to talk or hear., • Regularly required to sit, regular use of hands., • Frequently required to stand and walk., • Occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl and use foot/feet to operate machine., • Occasionally lift and/or move up to 60 pounds., • Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus., • The employee must be able to work under pressure with ever changing deadlines and priorities. AAP/EEO Statement Flower City Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), gender, national origin, ancestry, age, physical or mental disability, military status, status as a veteran or disabled veteran, sexual orientation, gender identity or expression, marital or family status, genetic information, medical condition, or any other basis protected by applicable federal, state, or local law, ordinance, or regulation.

Company Description \n Micro Instrument Corp specializes in designing and building custom assembly and test automation systems tailored to unique manufacturing needs. From medical products to automotive parts, we collaborate closely with clients from early product development stages to deliver innovative, cost-effective automation solutions. Based in the Rochester, New York Metropolitan Area, our services include proof of concept, prototyping, system design, and ongoing equipment support. At Micro, we prioritize efficiency and partnership, ensuring our clients can bring high-quality products to market faster. \n \n Role Description \n We are seeking a full-time, on-site Senior Application Engineer to join our team in the Rochester, New York Metropolitan Area. This role involves understanding client specifications, developing concepts and pricing those concepts to provide written proposals for custom automation solutiions to Micro's clients. The effort includes working with mechanical and electrical engineering as well as Micro's mechanocal and controls technicians. Day-to-day responsibilities include providing or researching technical solutions to support our clients needs. Occasionally visiting customers sites to get first hand views of present processes. The Senior Application Engineer will also work closely with vendors to optimize performance, and contribute to developing innovative manufacturing solutions for various industries. \n \n Qualifications \n\n • Experience in Technical Support with troubleshooting and resolving complex system issues\n, • Proficiency in mechanical /engineering and familiarity with relevant hardware often integrated into automation\n, • Expertise in Mechanical Engineering with a focus on system design and assembly\n, • Hands-on experience in Testing of systems to ensure performance and reliability\n, • Strong time management skills and ability to work collaboratively in a multidisciplinary environment\n, • Bachelor's degree in Engineering or a related field\n, • Prior experience in industrial automation or manufacturing is an advantage\n

About IntegraTouch \n Founded in 2002, IntegraTouch helps commercial and defense organizations solve demanding technology challenges through software engineering, technology consulting, and specialized talent. We bring people and technology together to strengthen operations, create new capabilities, and turn ambitious objectives into practical results. \n \n This opportunity brings that commitment to life: advancing the radio communications systems people rely on when coordination, reliability, and timely decisions matter most. IntegraTouch is seeking a Senior DSP and Embedded Software Engineer whose expertise, curiosity, and leadership can help shape the next generation of defense communications. By connecting algorithm design, embedded software, and real hardware, you will help turn every signal, processing cycle, and available connection into stronger, more dependable capabilities for the people carrying out critical missions. \n \n What you will help build \n\n • Communications waveforms and real time DSP software that advance radio capabilities.\n, • Efficient embedded C/C++ implementations that balance throughput, latency, memory, and numerical precision.\n, • Simulation and analysis workflows that connect algorithm behavior to performance on target hardware.\n, • Reliable interfaces between software, processors, RF hardware, and FPGA implementations.\n, • Automated tests and repeatable validation methods that help teams identify issues earlier and improve engineering confidence.\n, • Maintainable software architectures that support continued enhancement of communications products.\n\n \n How you will lead \n\n • Guide technical planning and development from requirements through integration and testing.\n, • Translate customer needs into engineering decisions that balance performance, schedule, and cost.\n, • Collaborate with software, electrical, RF, FPGA, manufacturing, and test teams.\n, • Mentor engineers, share knowledge, and help resolve technical obstacles.\n, • Strengthen Agile Scrum and DevOps practices through thoughtful improvements to development and testing.\n\n \n Your technical foundation \n Bring strong experience in embedded C/C++, DSP algorithm development, and digital communications, supported by the ability to lead engineering work from requirements through integration and testing. \n Relevant expertise includes: \n \n\n • Software defined radio (SDR), waveform development, and digital transmitter or receiver processing.\n, • Modulation and demodulation, synchronization, carrier recovery, and channel estimation.\n, • Digital filtering, FFTs, spectral analysis, and multirate processing.\n, • Equalization, error correction, and communications performance analysis.\n, • Fixed point optimization, multicore processing, multithreading, and real time operating systems.\n, • Hardware and software debugging, FPGA collaboration, and performance optimization.\n\n \n A modern engineering toolkit \n We value engineers who select tools thoughtfully and can connect experimentation with dependable production software. \n \n\n • C and modern C++ for embedded implementation and performance critical processing.\n, • Python, NumPy, and SciPy for algorithm exploration, signal analysis, reference models, and automated testing.\n, • MATLAB experience for modeling, simulation, and validation, with Simulink experience also valued.\n, • Rust as a complementary skill for memory safety and interoperability with existing C/C++ systems.\n, • GNU Radio and SDR development platforms for relevant prototyping and experimentation.\n, • Git, code review, continuous integration, automated builds, and hardware in the loop testing.\n, • Embedded Linux, real time operating systems, and processor architectures used in demanding communications applications.\n\n \n Additional perspectives we welcome \n Beyond the core DSP requirements, we are interested in engineers who understand emerging approaches and can assess where they offer practical value: \n \n\n • AI and machine learning applied to signal classification, interference detection, test data analysis, or engineering optimization.\n, • Familiarity with PyTorch or comparable frameworks for evaluating signal processing research concepts.\n, • Software defined networking (SDN), programmable network behavior, quality of service, and traffic prioritization where they intersect with radio communications.\n, • Adaptive and cognitive radio concepts, spectrum awareness, and techniques for operating effectively under changing channel conditions.\n, • Experience evaluating how experimental approaches can meet the timing, reliability, and resource constraints of embedded systems.\n\n \n Experience and education \n\n • Bachelor’s degree in an engineering discipline with at least 9 years of relevant experience developing real time embedded software in C or C++; or\n, • Graduate degree with at least 7 years of relevant experience; or\n, • At least 13 years of relevant experience in lieu of a degree.\n\n \n Location and requirements \n\n • Onsite in Rochester, New York.\n, • U.S. citizenship is required for this position under applicable government contract requirements.\n\n \n Why bring your expertise to IntegraTouch? \n Help solve a problem worth your experience. Influence the engineering decisions behind evolving communications capabilities. Share your knowledge with a multidisciplinary team and see your ideas progress from analysis to code to working hardware. We are looking for someone who is excited by what better communications can make possible, and ready to contribute to building it. \n \n Apply with your resume. We would welcome a conversation about the engineering challenges you have solved and what you want to contribute next. \n

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Location: Rochester, NY (onsite) Job Schedule: 9/80 Job Description: This person will contribute to the company's success by participating in digital and analog circuit design and product integration. This role will report directly to a Senior Engineering Manager and is responsible for successfully designing electronic circuit boards for radios and associated equipment, as well as working with cross-functional teams to support product integration and manufacturing introduction. Essential Functions: • Responsible for architecting, designing, developing, modifying, evaluating and integrating electronic equipment, electronic parts, components and integrated circuitry for complex, high performance hardware systems, • Determines design approaches and parameters, • Analyzes electrical requirements to determine feasibility of design within time and cost constraints, • Supports digital and analog hardware research, design, and development of circuit board assemblies, • Develops requirements from high-level use cases and product description documents, • Hardware printed circuit board design including requirement analysis, high level design, schematic capture and layout analysis, • Make design decisions and assess technical risks, • Perform simulation and analysis such as signal integrity, • Perform integration with other subsystems, • Perform subsystem and system level verification and validation testing, • Identify, track and repair assigned hardware defects, • Ability to obtain a US security clearance is required Qualifications: • Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience In compliance with pay transparency requirements, the salary range for this role in New York State is $80,500 - $149,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

We are seeking a highly skilled Senior Firmware Engineer to join our team and take a leading role in the design, development, and support of our embedded systems. You will be at the forefront of new product development while also ensuring the ongoing performance and reliability of our existing products in production. This position is ideal for an engineer who thrives on technical leadership, problem-solving, and mentoring others. • Firmware Development & Support – Lead the full firmware lifecycle, from concept and design through implementation, verification, release, and sustaining engineering across multiple products., • Testing & Validation – Plan and execute rigorous product and design verification tests to ensure compliance with performance, safety, and quality standards., • Technical Documentation – Create and maintain detailed product work instructions, process documents, and final release documentation., • Continuous Improvement – Drive engineering change requests and product improvements to keep solutions cutting-edge., • Design Leadership – Contribute to the design of core components and ensure alignment with product and quality requirements., • Project Leadership – Work closely with cross-functional teams to define schedules, budgets, risks, and deliverables. Act as a technical lead to ensure successful project execution., • Mentorship – Support the professional growth of junior engineers through coaching and knowledge sharing., • Bachelor's degree in Electrical/Electronic Engineering, Computer Science, Software Engineering, or a related field, • 5+ years of professional experience in firmware or embedded systems development, • Strong proficiency in C and C++ programming, • Solid understanding of embedded systems, including memory management, data structures, algorithms, and networking concepts, • Hands-on experience with debugging tools and methodologies, • Familiarity with communication protocols such as I2C and SPI, and hardware interface integration

The Electrical Engineer (Hardware Verification) will be part of the Hardware Design Verification and Validation (HDV) team, responsible for designing and automating RF test and measurement systems used to validate complex military communication and networking equipment. The role involves collaboration with cross-functional engineering teams to analyze test data, improve measurement techniques, and generate performance reports. As a member of the Hardware Design Verification and Validation (HDV) team, responsibilities will include design and automation of RF test and measurement systems for testing and characterization of complex military communication/networking equipment. In addition, the position will include collaboration with other scientists, engineers, and management to analyze test data, generate visualizations, and create reports. • Design, develop, and debug automation software for RF test systems using LabVIEW and TestStand, • Develop and improve measurement algorithms to enhance test efficiency and quality, • Analyze large datasets from RF testing and generate visualization reports, • Collaborate with electrical engineers to validate measurement techniques against product performance requirements, • Work with test equipment such as spectrum analyzers, oscilloscopes, and power meters, • Support RF and baseband testing for communication systems, • Troubleshoot test systems and improve automation workflows, • Provide mentorship and technical guidance to junior engineers, • Maintain documentation and reporting for engineering validation, • RF test and measurement experience, • LabVIEW or similar automation/software development experience, • Strong troubleshooting and debugging skills, • Experience with test equipment (spectrum analyzers, oscilloscopes, etc.), • Knowledge of networking or radio communication systems, • Ability to obtain U.S. Security Clearance, • Bachelor's Degree with 4+ years of relevant experience (OR Master's with 2+ years OR 8+ years without degree), • Experience in test automation and hardware validation, • Strong analytical and data interpretation skills, • Experience with software development for test systems, • Familiarity with communication protocols (RS-232, Ethernet, TCP/IP, USB), • Experience with Object-Oriented Programming (OOP/OOD), • Hands-on experience with LabVIEW, Python, or C#, • Familiarity with Linux-based systems, • Experience with version control tools (Git, SVN, JIRA), • Knowledge of RF systems and baseband processing, • Experience with XML, HTML, CSS, JavaScript, • RF Testing & Measurement, • Hardware Verification & Validation, • Test Automation & LabVIEW, • Data Analysis & Visualization, • Troubleshooting & Debugging, • Communication & Collaboration, • Defense and military communication systems, • Engineering lab setting with RF test equipment, • Collaborative, cross-functional engineering teams, • Structured 9/80 work schedule

Job Description CDL Driver / Boom Lift Operator Rochester, NY · $28–33/hour + overtime About the Company Join one of the largest distributors in NY & New England with over 35 years in the building materials industry. The company offers a comprehensive portfolio of commercial building products including acoustic ceiling systems, architectural doors and hardware, drywall and steel framing, insulation, and exterior systems. All routes are LOCAL — no overnight travel. Known for reliability, safety culture, and long-term employee development. Position Overview The CDL Driver / Boom Lift Operator is responsible for the safe, timely delivery of materials from branch locations to customer job sites. This role requires compliance with DOT and FMCSA regulations, safe operation of delivery equipment including boom trucks or Moffett, and strong communication with customers, dispatch, and internal teams. Reliability, safety awareness, and teamwork are critical to success. Key Responsibilities • Operate company delivery vehicles in accordance with DOT and FMCSA regulations, • Maintain a valid CDL Class A or B license and medical card, • Complete required DOT logs documenting time on duty and driving hours, • Perform daily DOT pre-trip and post-trip inspections, documenting issues to ensure timely maintenance, • Safely transport materials from branch locations to customer job sites, • Secure, tarp, and protect loads based on weather and delivery requirements, • Operate boom truck or Moffett to unload materials safely and efficiently, • Communicate job site concerns such as unsafe conditions or customer questions to the office promptly, • Assist forklift operators with truck loading and unloading, • Operate forklifts and pallet jacks as required (training provided if needed), • Maintain good housekeeping standards in trucks, yard, warehouse, and office areas Qualifications • High School diploma or equivalent, • Valid CDL Class A or B license with clean driving record, • Valid medical card, • Minimum 2–3 years of commercial driving experience, • Ability to pass pre-employment physical, drug screening, and background check, • Boom truck or Moffett operating experience preferred, • Strong attention to detail and safety awareness, • Ability to lift, move, push, or pull materials weighing up to 75 lbs with assistance Compensation & Benefits • Pay Rate: $28–$33/hour + overtime opportunities (negotiable for experience), • Health, dental, and vision insurance, • 401(k) retirement plan with company match, • Paid time off and holidays, • Training and development opportunities, • Monday–Friday schedule — no weekends

Would you like to be part of a team of technical experts building advanced imaging products for space, defense, and metrology? If so, we're looking for someone like you to join the Eoptic team! \n ‍ \n Job Summary \n At Eoptic, we design and manufacture advanced imaging products for space, defense, and industrial metrology — and we need a seasoned opto-mechanical leader to help us deliver them. We're currently seeking a Senior Opto-Mechanical Engineer to own the mechanical design of our multi-modal prism cameras, zoom optics, imaging payloads, and high-end metrology systems — spanning the UV through LWIR spectrum — from concept through production. In this role, you will design precision opto-mechanical structures and mechanisms that hold demanding optical tolerances through launch, harsh field environments, and long operational lifetimes. Successful candidates combine deep analytical rigor with hands-on integration experience and are reliable in delivering mission-critical hardware. If this applies to you, we'd like to hear from you. \n ‍ \n Job Responsibilities \n\n • Lead opto-mechanical design of imaging systems — prism camera engines, zoom lens assemblies, space imaging payloads, CUAS sensors, and precision metrology instruments — from concept through detailed design, build, and qualification. \n, • Design precision optical mounts, structures, and mechanisms (lens barrels, prism and beamsplitter mounts, focus/zoom mechanisms, kinematic and flexure mounts) that maintain alignment over thermal, vibration, and shock environments. \n, • Perform structural, thermal, and thermo-elastic analysis (hand calculations and FEA) and integrated STOP analysis in collaboration with optical designers to verify performance over environments. \n, • Develop and manage tolerance budgets in partnership with optical and systems engineering; translate optical sensitivities into achievable mechanical tolerances and assembly processes. \n, • Create detailed drawings with GD&T, select materials, adhesives, and finishes appropriate for space flight and high-reliability defense hardware. \n, • Design alignment, assembly, and test fixturing, and support technicians on the floor during integration, alignment, and environmental test campaigns. \n, • Support environmental qualification (TVAC, vibration, shock, thermal cycling), including test planning, fixture design, and post-test analysis. \n, • Coordinate with suppliers and machine shops on precision fabrication; review first articles and disposition non-conformances. \n, • Mentor junior engineers and help mature Eoptic's opto-mechanical design standards, processes, and documentation as we scale from prototype to production. \n\n \n Qualifications Required \n\n • BS, MS, or PhD in Mechanical Engineering, Optical Engineering, or a related field \n, • 10+ years of opto-mechanical design experience for space, defense, or high-precision metrology systems \n, • Experience designing opto-mechanics for imaging systems operating across the UV to LWIR spectrum, including material and mounting considerations for both refractive and reflective optics in multiple wavebands \n, • Demonstrated track record of designs that survived environmental qualification and performed on-orbit or in the field \n, • Expertise in precision optical mounting techniques (bonded, clamped, kinematic, flexure-based) and athermal design \n, • Proficiency in 3D CAD (SolidWorks or equivalent) and FEA (structural and thermal) \n, • Strong command of GD&T, tolerance analysis, and design for precision assembly \n, • Due to ITAR/export control requirements, applicants must be a U.S. person (U.S. citizen or lawful permanent resident) \n\n \n Qualifications Preferred \n\n • Experience with integrated STOP (structural-thermal-optical performance) analysis workflows \n, • Experience designing zoom or other moving-group optical mechanisms \n, • Familiarity with space flight workmanship and design standards (NASA-STD-5001, GEVS, ECSS, or similar) \n, • Experience with cryogenic or vacuum-compatible design, outgassing requirements, and space-rated materials selection \n, • Experience taking precision hardware from prototype into repeatable production \n\n \n About Us \n Eoptic is a leader in advanced imaging and optical systems, delivering multispectral and digital solutions for defense, industrial, and commercial applications. Based in Rochester, NY, Eoptic integrates cutting-edge optical technologies to address today's most complex challenges, from design to full-scale deployment. For more information, visit www.eoptic.com. \n ‍ \n Eoptic is an equal opportunity employer. All applicants will be considered without regard to race, color, religion, creed, gender, national origin, age, disability, marital or veteran status, or any other legally protected status. All employment is decided based on qualifications, merit, and business needs.

About the Company \n \n Global manufacturer of critical asset monitoring and protection protection instruments. This team based in the Greater Rochester, NY area designs and produces rugged hardware and software systems. \n \n About the Role \n \n We are seeking a Senior Firmware Engineer (Hybrid) to lead the design, development of complex, monitoring systems. \n \n We will help you move to the Greater Rochester area! \n \n Responsibilities \n \n\n • Develop firmware solutions for complex, embedded systems\n, • Coordinate firmware development ensuring quality product\n, • Support Product transfer to manufacturing\n, • Propel pre-qualification and verification testing to ensure compliance\n, • Support the development of overall projects and team\n\n \n Qualifications \n \n Degree with 5+ years of experience of hands on embedded systems design, development, and test \n \n Required Skills \n \n\n • Strong background with microcontrollers and microprocessor-based systems\n, • Expertise with Embedded, C/C++ real-time, multi-threaded programming\n, • Strong Linux and Windows\n, • Experience programming peripherals and working with industrial protocols\n\n \n If you are seeking a wonderful, growing team, apply today! \n

About the Company \n \n Our client is a U.S.-based technology and engineering organization developing advanced electronic systems for mission-critical applications. \n \n The engineering environment brings together electrical, digital, embedded software, FPGA, RF, mechanical, manufacturing, and systems disciplines to develop complex products from concept through production and field deployment. \n \n The Opportunity \n \n The company is hiring a Senior Digital Design Engineer to lead the design, development, integration, and testing of complex digital electronics. \n \n This is a hands-on engineering role for someone who has personally designed high-speed circuit boards, worked through schematic capture and PCB layout, supported prototype builds, and brought hardware up in the lab. \n \n The right person will be comfortable owning significant portions of the hardware development lifecycle while working closely with FPGA, firmware, software, RF, mechanical, manufacturing, and systems engineering teams. \n \n What You’ll Do \n \n\n • Design complex digital and mixed-signal electronic assemblies from concept through production.\n, • Develop system and board-level architectures, schematics, component selections, and bills of material.\n, • Design and support high-speed digital interfaces such as Ethernet, PCIe, USB, DDR, SPI, I2C, and similar technologies.\n, • Work closely with PCB layout resources on board stack-up, routing, signal integrity, power integrity, and manufacturability.\n, • Lead prototype bring-up, troubleshooting, validation, and root-cause analysis in the lab.\n, • Use oscilloscopes, logic analyzers, protocol analyzers, signal generators, spectrum/network analyzers, and other engineering tools to characterize and debug hardware.\n, • Collaborate with FPGA, embedded software, RF, systems, mechanical, manufacturing, and test engineering teams.\n, • Participate in technical reviews and communicate design decisions, risks, tradeoffs, and recommendations.\n, • Support product integration, qualification, production transition, sustaining engineering, and field issues.\n, • Provide technical leadership and mentorship to other engineers as appropriate.\n\n \n What We’re Looking For \n \n\n • Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related discipline.\n, • Significant experience designing complex digital electronics and printed circuit boards.\n, • Hands-on experience with schematic capture and multilayer PCB design.\n, • Strong understanding of high-speed digital interfaces and board-level design considerations.\n, • Experience taking hardware through prototype bring-up, debug, verification, and production transition.\n, • Strong lab skills and experience troubleshooting complex electronic systems.\n, • Ability to work effectively across multiple engineering disciplines.\n, • Strong communication skills and the ability to explain technical decisions clearly.\n, • Ability to work in the U.S. without sponsorship and meet applicable customer or program requirements.\n\n \n Nice to Have \n \n\n • Experience with Siemens PADS, Xpedition, Altium, OrCAD, Cadence Allegro, or similar PCB design tools.\n, • Experience with FPGA-based designs and VHDL, Verilog, or SystemVerilog.\n, • Experience with RF, embedded systems, or communications products.\n, • Experience with signal integrity and power integrity analysis.\n, • Experience developing products for aerospace, defense, communications, industrial, medical, or other highly regulated environments.\n, • Previous technical leadership or mentoring experience.\n\n \n Why This Role Matters \n \n The digital hardware is a critical part of the overall product architecture. \n This person will have significant influence over how new products are designed, integrated, tested, and ultimately transitioned into production. The role offers the opportunity to stay technically hands-on while also providing leadership across complex engineering programs.

The IT Service Desk Technician is the first point of contact for firm personnel seeking technical support. Working in a fast-paced professional services environment, the Technician supports a cloud-based Microsoft 365 workplace, a mobile laptop fleet, and the firm's legal applications, for users both in the office and working remotely. Success in this role calls for quick response, clear communication, and methodical troubleshooting. The position offers a defined path for growth for the right candidate. Duties and Responsibilities: • Serve as the first point of contact for internal users requesting technical assistance, by phone, email, ticket, and in person, • Log, categorize, prioritize, and track requests in Jira, the firm's IT Service Desk ticketing system, • Diagnose and resolve hardware, software, application, and network connectivity issues, escalating to senior IT staff when appropriate, • Support Microsoft 365 and the firm's cloud applications, including Outlook and Exchange Online, Teams, SharePoint, and OneDrive, • Administer day-to-day identity and access tasks, including account setup, password resets, group and license assignment, and multifactor authentication enrollment and troubleshooting, • Support the firm's laptop fleet through Microsoft Intune, including device enrollment, configuration, application deployment, and encryption and recovery key handling, • Support NetDocuments, DocuSign, Kofax, and other firm applications, and assist users with document workflows, • Provide remote support to attorneys and staff working off-site, including VPN, remote access, and connectivity troubleshooting, • Complete onboarding and offboarding tasks, including equipment provisioning, account and access changes, and asset tracking, • Recognize and promptly escalate phishing reports and suspected security incidents in accordance with firm procedures, • Own tickets through to resolution, providing status updates to users and following up after a fix to confirm the issue is closed, • Document solutions and workarounds, and contribute to the firm's internal knowledge base and support best practices, • Support the firm's managed print environment, including first-level troubleshooting and coordination with the managed print services vendor, • Share recurring issues, user feedback, and process improvement suggestions with the IT team and management, • Build and maintain working knowledge of new technologies adopted by the firm Technical Skills: Required: • Microsoft 365 and cloud collaboration: Word, Excel, Outlook, PowerPoint, and Teams, including support for Exchange Online, SharePoint, and OneDrive, • Identity and access: Microsoft Entra ID or Active Directory account administration, and multifactor authentication support, • Endpoint management: Windows 11 in a managed environment, Microsoft Intune or comparable MDM, and device encryption and recovery, • Service desk tooling: hands-on experience with Jira, including ticket creation, queue management, and workflow, • Remote support: VPN clients, remote access and remote-control tools, and Wi-Fi and home network troubleshooting, • Networking fundamentals: working understanding of TCP/IP, DNS, and DHCP sufficient to isolate connectivity issues, • Hardware and peripherals: laptop support, mobile device support, docking stations, printers, and multifunction devices, • Applications: Kofax Power PDF, and Microsoft Edge as the firm's standard browser Preferred: • Experience supporting a document management system, ideally NetDocuments, • Experience with DocuSign or another e-signature platform, • Familiarity with Confluence or another knowledge base platform, • Basic PowerShell for routine administrative tasks, • Prior experience in a law firm or other professional services environment, • Relevant certifications such as CompTIA A+, ITIL Foundation, or a Microsoft 365 endpoint administrator credential Qualifications and Competencies: • Strong verbal and written communication skills, with the ability to explain technical concepts to non-technical users, • Demonstrated troubleshooting and problem-solving ability, including the judgment to know when to escalate, • Proven ability to work collaboratively as part of a team, • Consistent accuracy and attention to detail in both technical work and documentation, • Ability to organize, prioritize, and manage competing requests in a high-volume environment, • A respectful, friendly, and service-oriented approach to colleagues at every level of the firm, • Ability to influence outcomes and improve processes constructively and without confrontation, • Analytical, curious, and process-oriented, with an interest in continued technical development, • Discretion and sound judgment in handling confidential and privileged information Education and Experience: • Bachelor of Science in Information Technology, Computer Science, or a related field, or equivalent practical experience, • Two or more years of experience in an IT service desk or help desk support role Physical Requirements: • Ability to transport and position computer equipment, printers, and related hardware, • Ability to bend, reach, and remain standing for extended periods, • Ability to lift and move items weighing up to 50 pounds Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. This is a snapshot of the core functions and responsibilities. All inquiries will be handled with the utmost confidentiality. The compensation range for this position is $55,000- $65,000 annually, representing our good faith and reasonable estimate of the potential compensation at the time of posting. Actual compensation will be determined based on various factors, including the candidate's qualifications, experience, skill set, and office location. Woods Oviatt Gilman LLP is an Equal Opportunity Employer. We value an open mind, dedication to work, and a collaborative spirit. We hire based on these qualities, a job's requirements, our business needs, and an applicant's qualifications. We do not tolerate discrimination or harassment of any kind—in the hiring process or in the workplace. We comply with the ADA and consider reasonable accommodation measures that may be necessary for eligible applicants/employees to perform essential functions. We participate in E-Verify. We will provide the federal government with employees' Form I-9 information to confirm authorization to work in the U.S. We will only use E-Verify once an employee has accepted a job offer and completed Form I-9.