Trabajos mechanical engineering en Philadelphia, Pennsylvania - Page 2Crear alertas

POSITION SUMMARY: The Water/ Wastewater Senior Engineering Technician is a professional with a 2 to 5 years of experience with EIT certificate (preferred). This individual will plan, design and perform analysis on water/wastewater engineering projects such as water main; sanitary main; pumping stations; and water & wastewater treatment facilities. The Engineering Technician shall be self-motivated, with good writing skills and capable of working in a team environment. PRIMARY DUTIES: • Hydraulic calculations and layout of structures., • Work on a team to produce correspondence/reports/biddable documents for water distribution systems; wastewater conveyance system; treatment plants; potable wells; water storage tanks; and water & sanitary pumping stations., • Engineering support to our inspection department., • Capable of addressing multiple simultaneous assignments, on-time and within budgets., • "Proactive"' identification of problems/issues coupled with detailed analysis and effective resolution., • Work on a team to produce regulatory permitting applications. KNOWLEDGE, SKILLS and ABILITIES: • EIT preferred while working towards PE., • Ability to clarify and concisely express thoughts verbally and in written correspondence/reports/specifications., • Provides effort and takes pride in all work assignments produced., • Not afraid to ask for guidance/assistance in order to expedite the date of assignment deliverables., • Ability to simultaneously work on group and individual assignments., • Must have effective communication, management and writing skills., • Must be skilled in the use of Word/Excel products., • AutoCAD capability a plus. EDUCATION/EXPERIENCE: • Bachelors of Science Degree in Civil, Mechanical, Structural, or Chemical Engineering curriculum from an accredited four-year college or university. Certifications/Licenses Required • EIT or preparing to take and working towards PE. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of a Construction Observer, the employee typically works in the field and may be exposed to outside weather conditions. Computer/technology is required to document and report work performed. The position requires the ability to lift and carry up to 50 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $61,000 - $91,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description Job Title: Automation Design Engineer Job Location: Philadelphia Job Type: [Full-Time] Reports To: [VP Engineering] Company Overview: Biomeme is a leading innovator … We are committed to providing high-quality solutions to our customers and are seeking a talented and experienced Automation Design Engineer to join our dynamic engineering team. Position Summary: As an Automation Design Engineer, you will be responsible for designing, developing, and optimizing production line fixtures for the manufacturing of biotech instruments. You will work closely with cross-functional teams to ensure that fixtures are reliable, efficient, and meet the high standards required for precision manufacturing in the biotech industry. Key Responsibilities: • Design and develop innovative fixtures through software and hands-on work for automation production lines, ensuring alignment with product specifications, regulatory standards, and manufacturing requirements., • Collaborate with manufacturing, mechanical, and electrical engineering teams to integrate fixtures seamlessly into automated production lines., • Conduct feasibility studies and simulations to validate fixture design and optimize for cost, efficiency, and scalability., • Review and refine designs using CAD software (e.g., SolidWorks) and ensure designs are manufacturable, functional, and robust., • Develop detailed technical drawings and specifications for fixture manufacturing, ensuring they comply with quality and regulatory standards., • Work closely with the production team to troubleshoot and resolve any fixture-related issues that arise during the production process., • Implement continuous improvements to production line fixtures, ensuring minimal downtime and increased throughput in a fast-paced environment., • Support testing and validation of fixtures to ensure performance under real-world conditions, ensuring they meet the stringent requirements for biotech instrument production., • Provide technical support to manufacturing teams to ensure proper fixture use, maintenance, and troubleshooting., • Bachelor's degree in Mechanical Engineering, Biomedical Engineering, or a related field., • Proven experience (3+ years) in fixture design and automation for high-precision manufacturing, preferably within the biotech, medical device, or automation industries., • Strong proficiency in CAD software (SolidWorks, AutoCAD, or similar)., • Knowledge of manufacturing processes and material selection, particularly in automated production environments., • Familiarity with regulatory standards and quality control processes in the biotech or medical device industries (e.g., ISO 13485, GMP)., • Strong problem-solving skills with a focus on continuous improvement and innovation., • Excellent communication and teamwork skills to collaborate effectively with cross-functional teams., • Detail-oriented with a strong commitment to quality, safety, and operational efficiency., • Experience with the design and integration of automated systems for biotech instrument production., • Familiarity with PLCs, robotics, and control systems used in automated production lines., • Competitive salary and benefits package., • Opportunities for career growth and professional development., • Health, dental, and vision insurance., • Retirement savings plan with company contributions.

Job Description You must possess a valid Professional Engineering license (PE) to be considered Unqualified candidates will not receive a response. As an Electrical Engineer, you will conduct and manage investigations involving residential, commercial and industrial electrical systems; examine and assess electrical equipment and components; and conduct fire origin and cause investigations. You will interact with clients and other consultants, manage multiple, unique projects, and prepare written reports summarizing your analyses. Engineering Design & Testing Corp. (EDT) is an association of engineers committed to the study, interpretation and resolution of loss. With 15 offices nationwide, EDT engineers are well regarded as technical and scientific resources when determining the root causes of losses involving people, property, and products of manufacture. Our engineers are also called upon to assess the scope of damage to commercial and industrial facilities and equipment. Our clients include insurance-related firms and companies, law firms, government agencies, and private industry. EDT engineers are professionals who enjoy technical challenges and job variety while working with top-notch colleagues. The environment at EDT is one where motivated engineers want to join and stay. Technical Qualifications: • Bachelor of Science degree in Electrical Engineering (not electronics), • Licensed Professional Engineer (P.E.), • Advanced Technical Education degrees (a plus), • Computer Software Capable (for example: MathCAD, AutoCAD, Microsoft Office) Experience in One or More of the Following Areas: • Process Plants, • High Voltage Power Generation and Distribution, • Instrumentation and Controls Professional Skills: • Prioritize effectively, • Think independently, • Communicate clearly, orally and in writing, • Think and work analytically, • Coordinate and work well with others, • Exercise sound judgment and use common sense, • Foster strong, lasting relationships, • Embrace and thrive on challenge, • Show flexibility and adaptation to new situations Characteristics: • Professionalism, • Honesty, • Integrity Engineering Design & Testing offers a comprehensive benefits package: • Health Insurance, • Dental Insurance, • Long Term Disability Insurance, • 401(k) with company match, • Training Opportunities, • A culture of balance between work responsibilities and family life Engineering Design & Testing Corp. provides the opportunity for engineers joining the firm to begin their careers learning alongside experienced and accomplished colleagues. Given the nature of the work, the engineers at the firm enjoy travel on assignment (field work). EOE View our site online at Engineering Design & Testing Corp also has opportunities in other locations for Civil/Structural, Mechanical and Electrical Engineers who are Licensed P.E.'s. Please, no agencies.

Job Description This requires an individual who is self-motivated and able to work independently. You will be responsible for leading and helping to further grow our local office and Mechanical Engineering Department as well as participate in business development activities for the company. Duties will also include leading projects from concept through construction, coordination with the client, utilizing and coordinating internal resources and representing our firm to the client team. • BS in Mechanical Engineering, • 2-5 years minimum experience in a related field, • PE or EIT required, • LEED Accreditation a plus, • Proficient with Revit MEP and AutoCAD, • Experience with design and coordination of complex mechanical systems, • Knowledge of plumbing and fire protection systems, • Successful experience in project management and client interaction, • Demonstrated leadership with staff and projects

Job DescriptionProvide engineering, technical and logistics support to the Shafting, Surface Ship Propulsion Waterjets, and Surface Ship Propellers Branch in Code 427 in areas of Propulsion Waterjets, Bow Thrusters, and Rudders systems. Most work will be accomplished primarily on site at Naval Surface Warfare Center Philadelphia Division, Phila Navy Yard building 77L. Occasional off-site travel may be required to support technical meetings, ship checks, repair oversight, availability support, and trials support. Duties & Responsibilities In support of U.S. Navy Ship Propulsion Waterjets, Bow Thrusters, and Rudders and associated components related issues: • Review and or develop specifications and test procedures for U.S. Navy Propulsion System In-Service Engineering Agent (ISEA)., • Provide input to risk matrices in relation to Waterjets, Bow Thrusters, and Rudders and associated powertrain components decisions for ISEA., • Review and assess drawings related to Waterjets, Bow Thrusters, and Rudders and associated components for ISEA., • Provide logistics support for Waterjets, Bow Thrusters, and Rudders., • Support Waterjets, Bow Thrusters, and Rudders and associated powertrain systems through Fleet distance and onsite support., • Provide trouble shooting assistance for Waterjets, Bow Thrusters, and Rudders., • Provide assistance in developing maintenance requirements for Waterjets, Bow Thrusters, and Rudders., • Complete or review Waterjets, Bow Thrusters, and Rudders Analysis reports for ISEA., • Review performance specifications, requirements, component drawings, requests for deviations, contract deliverables, and installation drawings for ISEA., • Review and maintain metrics related to Waterjets, Bow Thrusters, and Rudders equipment., • Develop recommendations to improve the system based on metrics given., • Review and update technical documentation related to Waterjets, Bow Thrusters, and Rudders systems, • Domestic travel, including shipyard and shipboard operations.Qualifications, • Bachelor of Science degree in Naval Architecture, Marine or Mechanical Engineering, from an accredited institution., • 5-10 years of practical technical experience in the engineering process, including concept development, analysis, design, drawing, integration and testing of complex mechanical and/or ocean deployed systems., • Demonstrated ability to lead technical groups and interact with customer representatives., • Proficiency in engineering software (i.e. SolidWorks, ANSYS, AutoCAD, Matlab, GHS hydrostatics, etc), and Microsoft Office., • Work closely with mechanical, electrical, software, and systems engineers, as well as other cooperative disciplines, to solve problems and constructively architect a working system., • Responsible and accountable for your results, working with considerable autonomy, but also knowing when to ask for assistance., • Must be a US Citizen., • Ability to obtain a United States Government Department of Defense Security Clearance (active clearances preferred, but not prerequisite), • Desire to stretch and expand your talents, expertise, competency, and responsibilities., • Exercise excellent technical judgement, creativity, and initiative with attention to detail consistently throughout your work product, with awareness of the "system" perspective., • Strong communication, organizational and technical writing skills, including ability to effectively document, convey, and present engineering concepts and products to team members and customers 2za80yUSN9

Job Description Candidate should have previous Forensic experience. You must possess a valid Professional Engineering license (PE) to be considered Unqualified candidates will not receive a response. As an Electrical Engineer, you will conduct and manage investigations involving residential, commercial and industrial electrical systems; examine and assess electrical equipment and components; and conduct fire origin and cause investigations. You will interact with clients and other consultants, manage multiple, unique projects, and prepare written reports summarizing your analyses. Engineering Design & Testing Corp. (EDT) is an association of engineers committed to the study, interpretation and resolution of loss. With locations nationwide, EDT engineers are well regarded as technical and scientific resources when determining the root causes of losses involving people, property, and products of manufacture. Our engineers are also called upon to assess the scope of damage to commercial and industrial facilities and equipment. Our clients include insurance-related firms and companies, law firms, government agencies, and private industry. EDT engineers are professionals who enjoy technical challenges and job variety while working with top-notch colleagues. The environment at EDT is one where motivated engineers want to join and stay. Technical Qualifications: • Bachelor of Science degree in Electrical Engineering (not electronics), • Licensed Professional Engineer (P.E.), • Forensic Experience, • Advanced Technical Education degrees (a plus), • Computer Software Capable (for example: MathCAD, AutoCAD, Microsoft Office) Experience in One or More of the Following Areas: • Process Plants, • High Voltage Power Generation and Distribution, • Instrumentation and Controls Professional Skills: • Prioritize effectively, • Think independently, • Communicate clearly, orally and in writing, • Think and work analytically, • Coordinate and work well with others, • Exercise sound judgment and use common sense, • Foster strong, lasting relationships, • Embrace and thrive on challenge, • Show flexibility and adaptation to new situations Characteristics: • Professionalism, • Honesty, • Competitive and Unique Salary Plan, • Health Insurance, • Dental Insurance, • 401(k) with company match Our unique salary plan allows for financial growth unmatched in the industry. EOE View our site online at Engineering Design & Testing Corp also has opportunities in other locations for Civil/Structural, Mechanical and Electrical Engineers who are Licensed P.E.'s. Please, no agencies.

Job Description NDI Engineering Company is seeking a Project Lead Engineer to join our team and support design projects in our Thorofare, NJ, office. The ideal candidate will have experience in design of Naval Ship Hull, Mechanical and Electrical (HM&E) systems; have experience executing design projects, particularly in AutoCAD; possess strong organizational skills and attention to details; and, possess strong communication skills. Job Responsibilities • Organize and assign design tasks in accordance with design process procedures., • Identify personnel requirements in support of design development across multiple disciplines, • Provide instruction, guidance and direction to design developers in execution of the design by providing mentorship and leadership., • Review design requirements and establish analyses criteria., • Conduct and document analyses supporting the suitability of designs; make design recommendations with engineering sketches of concepts to address design issues., • Must be a U.S. Citizen and be able to obtain and maintain a U.S. Department of Defense Security Clearance., • Must possess a Bachelor of Science in Engineering degree; Professional Engineer or Engineer in Training Certification preferred but not required, • Must have at least 7 years of engineering experience., • Must have experience using Microsoft Office and Outlook., • Excellent leadership and communications skills. GcpZsL8luS

Job DescriptionNDI Engineering Company is seeking a CAD Designer (electrical, mechanical or structural) to support the design of US Navy Test Facilities, as well as other design projects. This position will be based out of our office in Thorofare, NJ. Qualifications: • 3 to 7 years of professional experience in structural, mechanical or electrical design, • Experience with designing large scale machinery/equipment within large facilities is strongly preferred, • Proficient in computer-aided design (CAD) and drawing development, preferably with AutoCAD., • Capable of developing 2D drawing packages from 3D models is preferred, • 3D design and modeling is required (AutoCad preferred), • Must be a US citizen and able to qualify for a DoD Secret clearance., • Have strong verbal and written communications skills. c8fJSNPFUo

Job DescriptionDescription: Title: Electrical Testing Technician Company Overview: Potomac Testing, a TechPro Power Group company, has been a leading provider of comprehensive low, medium, and high voltage electrical equipment services since 1985. The company offers a range of services, including NETA acceptance and maintenance testing, planned and emergency field services, power quality and engineering studies, and retrofitting and refurbishment of electrical equipment. Position Type: Full-Time About Us: Potomac Testing, a member of the TechPro Power Group family, is renowned for its expertise in electrical equipment services. With a history dating back to 1985, our commitment to excellence has made us a trusted partner in the industry. Job Summary: Potomac Testing is seeking an experienced Electrical Testing Technician to join our team. The successful candidate will perform acceptance and maintenance testing on low and medium-voltage switchgear, circuit breakers, transformers, protective relays, automatic transfer switches, motor control centers, ground systems, etc. This position will require the ability to operate various testing tools and equipment, as well as read and interpret electrical control schematics and diagrams. The Electrical Testing Technician will also be responsible for documenting services by maintaining records and writing technical reports detailing field work performed. Responsibilities: • Perform acceptance and maintenance testing on electrical equipment per NETA standards, • Operate various testing tools and equipment including megger, digital multimeter, Hipot tester, multiamp relay tester, GFI, TTR, primary and secondary injection set, etc., • Document services by maintaining records and writing technical reports detailing field work performed, • Read and interpret electrical control schematics and diagrams, • Perform extensive testing, problem identification, and troubleshooting, • Inspect and service transformers, switchgear, and relays, • Evaluate the operating condition of equipment, • Fundamental understanding of electrical and mechanical testing procedures, • Familiarity with electrical test equipment and fundamentals, • Experience in performing extensive testing, problem identification, and troubleshooting, • Strong background in troubleshooting and performing start-up service, • NETA level II, III, or IV Certification preferred, • Strong verbal and written communication skills, • Negotiable salary $30.00 - $60.00 per hour depending on experience, • Annual bonus, • Full benefits package including, paid vacation and holidaysRequirements:

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For As an MEP Superintendent, you will be based in the Northeast, and will be responsible for field operations and onsite construction management of design-build construction projects, specifically quality control for mechanical, electrical, plumbing, and fire protection, construction, start up, and testing on highly complex projects nationwide. The Specifics of the Role • Coordinate with preconstruction, design, engineering, procurement, operations, safety, quality, and all other project site management team members to assure that the there is always adequate project resources., • Coordinate, direct, and monitor the activities of MEP/FP subcontractors and suppliers., • Coordinate and administer MEP/FP related materials, systems, and shop drawings submittals., • Coordinate and administer MEP/FP RFI’s, field changes, and other field engineering related items., • Coordinate and administer MEP/FP Quality Control, Start-up and Energization, Pre-Functional Checklists, and Functional Performance Testing., • Directly responsible for the following but not limited to the following MEP Systems scopes:, • Fire Suppression Systems., • Plumbing Systems (DWV, Storm, Domestic Water, etc.) Medical & Natural Gas Systems, • Energy and Fuel-Oil Systems., • Compressed-Air & Vacuum Systems., • Chemical-Waste Systems., • Heating, Ventilation and Air Conditioning (HVAC)., • Building Controls and Integration., • Refrigeration Cooling Systems., • Geothermal Energy Systems., • Steam and Condensate Systems., • Testing, Adjusting, and Balancing for HVAC., • Water Treatment Systems (Wastewater, Potable, Purity, etc.)., • Low and Medium Voltage Electrical Distribution Systems., • Lighting and Lighting Controls., • Power Generation Systems., • Uninterruptible Power Supply Systems., • Surge Protection Systems., • Communication Systems., • Electronic Safety and Security Systems., • B.S. in Construction Management or Engineering or equivalent trade experience with progression to management levels., • 10+ years of experience in highly technical commercial/industrial construction management, on projects of 10+ million, ideally with design-build experience., • Ability to supervise construction employees and subcontractors to accomplish work within budget and schedule constraints., • Strong project safety record and commitment to safety and quality., • Strong work ethic and willingness to travel or relocate to jobsite., • Creative and results-oriented with a sense of urgency., • Ability to walk the job site, climb ladders, and multi floor scaffolding., • Our clients and projects are nationwide – Travel will be required., • No other builder can offer the collaborative design-build approach that Clayco does., • We work on creative, complex, award-winning, high-profile jobs., • 2024 Best Places to Work – Crain’s Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal., • 2024 ENR Midwest – Midwest Contractor (#1)., • 2024 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5)., • Discretionary Annual Bonus: Subject to company and individual performance., • The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Job Description We are seeking a skilled and motivated Diesel Equipment Mechanic to join our client's team. As a Mechanic, you will be responsible for diagnosing, repairing, and maintaining diesel generator equipment used in various industries. Your role will involve troubleshooting mechanical issues, performing inspections, and completing necessary repairs or part replacements. You will work directly in the shop, ensuring that the equipment is functioning optimally and minimizing downtime. Attention to detail, strong technical skills, and a commitment to safety are essential for success in this role. If you are a team player who enjoys working in a dynamic environment, we would love to hear from you! • Consults with Service Supervisor to plan effective work and travel schedule, giving priority to customer need, considering location of machine and availability of parts., • Diagnose malfunctions: repairs and/or replaces worn and defective parts; installs new assemblies, adjusts devices and controls - to correct malfunctions and to keep machines in operating condition., • Provides tools and parts and arranges for facilities to perform repair work (usually on customer premises)., • Inspects, operates, and tests machines upon initial delivery, at specified inspection intervals and upon completion of any repair work to ensure proper functioning of equipment and its components., • Reports to Service Supervisor such information as name of customer, description of machine, nature of malfunction, the time involved in working, driving, and waiting, mileage, etc., so that proper accounts can be charged, and proper billing can be made., • Strives to increase technical skills through attendance at company-sponsored vocational schools, annual training meeting of departmental personnel and reading of technical literature., • Promotes and enhances the company image by maintaining a neat, personal appearance and by keeping the service truck in a clean, polished, and orderly condition., • Experienced or advanced servicemen are expected to serve as troubleshooters on recurring or unusual problems, conferring with Engineering, Manufacturing, and other service personnel to resolve., • Experience working on heavy equipment preferred, • Experience working with mechanical, electrical and hydraulic equipment, • 2+ years of diesel service or equipment experience preferred, • Hydraulic experience preferred, • Ability to pass a background check, drug screen, MVR and physical, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays)

Job DescriptionABM, a leading provider of integrated facility solutions, is looking for an Engineering Support Manager. ABM (NYSE: ABM) is a leading provider of facility solutions with revenues of approximately $6.4 billion and over 130,000 employees in 300 offices deployed throughout the United States and various international locations. ABM’s comprehensive capabilities include electrical & lighting, energy solutions, facilities engineering, HVAC & mechanical, janitorial, landscape & turf, mission critical solutions and parking, provided through stand-alone or integrated solutions. Founded in 1909, ABM provides custom facility solutions in urban, suburban and rural areas to properties of all sizes — from schools and commercial buildings to hospitals, data centers, manufacturing plants and airports. The Company may require that the successful candidate hired for this position be fully-vaccinated for COVID-19, if and to the extent permitted by applicable law. The Company will make exceptions for medical, sincerely held religious belief, or other legally required exceptions. The Assistant Engineering Operations Manager will work directly with the Engineering Manager to deliver top tier asset management with a budget conscious focus and a customer centric experience. The Operation Manager is responsible for all properties in their region and must be involved in every aspect of maintaining these assets. This must be done in a manner that not only protects but maximizes the value of the properties. We are in search of a dynamic Operations Manager to join our team in the Philadelphia area. The Assistant Engineering Operations Manager supports the overall implementation of ABM Engineering Services’ policies and procedures, engineering standards and safety programs in his/her assigned portfolio of buildings. In addition, each manager will support and back-up all Engineering Managers within his/her region with all accounts. The Assistant Engineering Operations Manager supports the management of employee related human resources and payroll functions within a portfolio with emphasis on minimizing liability and risk exposure. Further, the Operations Manager will support client requests and manage client expectations for their designated accounts. The Assistant Engineering Operations Manager, under the supervision of the Engineering Manager, is responsible for the overall operation of service delivery to assigned clients. The successful candidate will support the implementation and documentation of site safety plans and all ABM Engineering Services operational standards and guidelines as well as site specific standards, policies and procedures relating to the engineering department. #400Essential Functions Under the Direction of the Engineering Manager • Day-to-day management of the local workforce to include Mechanical operations in assigned accounts, • Facilitate accurate AES billing, payroll and accounting. Use and manage ABM accounting systems, • Ensure consistent reporting, • Ensure ABM Engineering operational standards are implemented, • Ensure ABM Engineering Services’ Safety Programs are implemented, • Training - safety, procedural and technical for area employees., • Provide supervision over company directed QA program., • Auditing/benchmarking of job sites and employee processes., • Oversee scheduling of job site supervisors and employees., • Assist in the development of new business to include participation in marketing, sales and local BOMA/IFMA events., • Review, support, and comment on monthly chief engineer reports, • Assist in the management of overtime and client overtime expectations., • Must have bachelors degree in Mechanical Engineering, Electrical Engineering, Construction Management, Facilities Management or related, • Must be a recent college graduate within 0-3 years post graduation, • Must have knowledge of MS Office Applications including Word, Excel, Outlook and PowerPoint., • Must have excellent verbal and written communication skills., • Able to work well in a customer focused team environment., • Excellent customer service, employee relations and good tenant/customer interaction skills., • Proven ability to work with a variety of staff and management.

Job Description Who We Are: At Formic, we're on a mission to revolutionize American manufacturing and create more abundance in the world. We believe in continuing the American legacy of innovation by making automation accessible to all manufacturers and increasing their factory productivity by 10x. Built upon deep expertise in robotics and manufacturing, our unique full service automation solutions combine the best automation technology, software, and analysis tools for manufacturers with best in class uptime, support, and maintenance services. We are creating a new era of supercharged efficiency and competitiveness for US manufacturers.As the world faces growing pressure from tariffs, rising costs, and labor shortages, Formic is uniquely positioned as the industry leading solution to overcome these challenges. Fueled by our vision for a re-industrialized domestic supply chain, everything we do is aimed at growing "Made in America" products. And we're growing fast - achieving 7x growth in production hours YoY. Supporting us in our mission, with investments thus far totaling over $60 million, are backers including Lux Capital, Initialized Capital, Blackhorn Ventures, Mitsubishi HC Capital NA, and CEOs and founders of multiple Fortune 50 companies. About the Production Optimization Team: The Production Optimization team is responsible for delivering uptime, performance, and insight across Formic's nationwide fleet of robotic systems. This team is deeply technical and customer-facing—at the intersection of automation engineering, field service, and business impact. The Robotics Field Service Engineer (FSE) plays a critical role in this mission. You will diagnose issues, perform maintenance, monitor systems, and interact with customers to ensure optimal performance. You'll work hands-on with equipment from OEMs like Fanuc, Yaskawa, ABB, Universal Robots, and others across food, packaging, CPG, and logistics environments. What You'll Do: Field Service and Support • Perform preventative, corrective, and predictive maintenance for robotic manufacturing cells, • Respond to alarms or escalations (remote or on-site), diagnosing and resolving issues in accordance with customer ASA (agreed service agreements), • Provide on-site production support and informal training to operators and technicians, • Use CMMS tools (e.g. MaintainX) to log and track all field activity, asset status, and spare parts needs, • Coordinate self, vendors, and partners for in-field support—including scheduling and customer alignment, • Monitor system performance remotely via Formic dashboards (e.g., Grafana), • Generate detailed service reports including issue, RCA (root cause analysis), resolution, and follow-ups, • Feed real-world system and customer insights back into Continuous Improvement and Customer Success teams, • Build trusted, professional relationships with plant managers, operators, and technicians, • Document and escalate feedback from the field to internal stakeholders for commercial or product consideration, • Support site onboarding by identifying key champions and mapping decision-makers, • Collaborate in RCA sessions, site audits, and Continuous Improvement initiatives, • Train and mentor junior field technicians as needed, • Continuously improve technical knowledge (robotics, controls, networking, pneumatics, packaging equipment), • Maintain required safety, Lockout / Tagout (LOTO), and forklift certifications Required: • 3+ years of hands-on field service experience working on robotic or automation equipment, • Practical troubleshooting skills across electrical, mechanical, and PLC/robotic control systems, • Experience reading electrical schematics, wiring diagrams, and pneumatic drawings, • Strong familiarity with safety protocols, especially LOTO, and adherence to GMP or industrial SOPs, • Experience using CMMS tools (MaintainX, UpKeep, FIIX, etc.) to track, schedule, and report maintenance, • Comfortable with local area travel up to 80%, (Formic will provide mileage reimbursement for travel in your personal vehicle), • Overnight travel up to 50% (travel and meal expenses covered by Formic), • Clear communicator across email, phone, and on-site conversations—able to write effective service reports, • Experience with some 6-axis robot brands (e.g. Fanuc, Kuka, Yaskawa, ABB, Universal Robots), • Familiarity with robot palletizing, case packing, pick-and-place, and conveyor systems, • Background in high-speed manufacturing (food, beverage, packaging, CPG), • Comfort operating in customer-facing or account-support roles, • High autonomy and ability to resolve issues without extensive supervision, • Clean and timely documentation of all service work, • Frequent collaboration with Customer Success, Continuous Improvement, and Engineering teams, • Contribution to reducing overall fleet downtime and improving system uptime and customer satisfaction metrics Equity in Formic: Own a meaningful stake in a fast-growing Series A startup, backed by leading global investors * Comprehensive Healthcare Coverage: 99% covered Medical, Dental, and Vision insurance plans, with 75% coverage for dependents, provided by Blue Cross Blue Shield and Guardian * Additional Fully Covered Insurance Benefits: FSA & DCFSA, Life Insurance, Short-Term Disability, and Long-Term Disability through Guardian, all 100% employer-paid * Employee Assistance Program (EAP): Fully funded by Formic and provided via Guardian, offering support when you need it most * Paid Parental Leave: Generous parental leave to support our employees and their growing families * Company-sponsored 401(k): Invest in your future with our company-backed retirement savings plan * Home Office Stipend: A one-time allowance for fully remote employees to set up your ideal at-home or on the road work environment * Monthly Cell-Phone Reimbursement: Monthly stipend toward phone and internet expenses * Flexible Time-Off: Take the time you need, when you need it, supported by our flexible PTO policy * Paid Company Holidays: Celebrate important dates with paid time off Compensation Philosophy Formic's compensation packages - including salaries and equity - are thoughtfully benchmarked against peer companies at a similar growth stage. Equity represents a critical part of our mutual investment: when Formic succeeds, so do you. Final compensation packages are carefully customized based on candidate preference for cash and equity balance, experience, geographic location, and market considerations. Our goal is to attract and reward top talent who will significantly impact our organization. We're open to meaningful discussions about compensation structure to secure exceptional team members. The anticipated base pay range for this position is detailed below. Base Salary Range:$70,000—$120,000 USD What we look for: We're building a company from the ground up, so every single person we hire has a massive impact on our team, culture, and ability to accomplish our mission. While each individual brings their own unique skills and perspectives to Formic, we look for people who share our vision and act in alignment with our Operating Principles. If this sounds like you, Formic could be the place for you! • Fearless Optimism: You share our ambitious vision of what we can accomplish. You're aware of the challenges we will face as a startup doing new things in an old space, but you're energized by the incredible opportunity we have to drive change for our customers, and for the manufacturing industry at large., • Factories First: You have a strong customer focus, no matter who your customer is. You seek to make things easier and better for our customers, even if it makes your job a little harder., • Today, Not Tomorrow: There are always plenty of projects to tackle in a startup, but you prioritize, take accountability for work, and have a bias toward action., • Be Right Often: You don't do things just because that's how they've always been done. You keep looking for ways to improve, seek out feedback along the way, and back your decisions up with data., • Made of Rubber: Just like rubber, when you fall you bounce back up. You know there's going to be a lot of challenge and change in our work ahead but you are adaptable, resilient, and ready to thrive through it all.

Job Description Engineering Technician I – V – NSWCPD Code 316 Salary Grade/Level/Family/Range Technician I: $19.13/hour Technician II: $21.47/hour Technician III: $24.02/hour Technician IV: $29.75/hour Technician V: $36.38/hour Up to an additional $5.09/hour health & welfare, depending on benefit enrollment Company Overview: KMS Solutions, LLC is a technical management / solutions company that specializes in engineering, analysis, and cyber security. Founded in 2005, KMS is a certified small business with nearly two decades of experience supporting the Department of Defense as well as many other departments and programs critical to our Nation’s security and well-being. KMS is a two-time winner of the USA Today Top Workplaces recognizing quality workplace cultures across the United States who put their employees first. Additionally, we received the Providence Journal Rhode Island Top Workplaces award and Culture Excellence Awards for Compensation & Benefits, Innovation, Leadership, Purpose & Values and Work-Life Flexibility Position Summary / Objective: The Naval Surface Warfare Center Philadelphia Division (NSWCPD) is a Department of Defense entity responsible for research and development, test and evaluation, engineering, and Fleet support services for the Navy’s ships, submarines, military watercraft, and unmanned vehicles. This position supports NSWCPD Code 316, which is responsible for the Planned Maintenance System (PMS)/Class Maintenance Plan (CMP), Reliability Centered Maintenance (RCM) and PMS Service Request (PSRs), review of New Construction PMS Contract Deliverables, and PMS update and development for in-service, modernization, new construction, and land-based engineering test site maintenance documents. Essential functions: Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Review Engineering and technical documentation to determine compliance with engineering standards, technical accuracy, and adequacy in relation to functional, operational, and technical requirements., • Perform engineering analysis, reviews, studies and provide recommendations related to the development, interoperability, integration, operations, and use of Maintenance Standards during system, subsystem, and equipment maintenance., • Collaborate with the customer and various organizations, offering in-depth research and data analysis to improve engineering documentation and provide informed technical feedback., • Assist in reviewing, tracking, and analyzing Fleet feedback (e.g., Maintenance Index Pages (MIPs), Maintenance Requirement Cards (MRCs), LARS, TFBRs, and LARs) related to machinery systems., • Support engineering teams in updating PMS documentation based on in-service reliability and maintenance data., • Provide technical input for the development and modification of Integrated Logistics Support (ILS) products, including technical manuals, maintenance plans, and provisioning documentation., • Use Navy databases and tracking tools (e.g., CDMD-OA, SKED, OMMS-NG, TDMIS) to retrieve and validate logistics and maintenance data., • Participate in Failure Review Boards, Technical Feedback Reviews, and support the analysis of failure trends., • Draft reports and documentation related to PMS changes, logistics deficiencies, or process improvements., • Collaborate with engineers, logisticians, and program office staff to address shipboard maintenance and support issues., • Provide administrative functions for program efforts in special situations including, but not limited to meetings, and preparing/maintaining history files. Required education and experience: • High School Diploma or Accredited GED equivalent., • Bachelor of Science (or higher) in Mechanical Engineering may be substituted for relevant experience requirement., • Required years of professional experience as an Engineering Technician:, • Engineering Technician I - Entry Level, • Engineering Technician II - 1 year, • Engineering Technician III - 3 years, • Engineering Technician IV - 7 years, • Engineering Technician V - 10 years Preferred education and experience: • Bachelor of Science (or higher) in Mechanical Engineering., • Familiarity with Maintenance Standards and Hull, Mechanical, and Electrical (HM&E) systems is a plus., • Current or recent shipyard and maintenance availability experience and be familiar with availability work packages and tracking metrics., • Experience as a PQS Worker, Work Center Supervisor, or 3M Coordinator within the Navy’s maintenance system., • Familiarity with the Navy’s PMS and ILS concepts., • Familiarity with engineering documentation standards and quality assurance practices., • Experience with Ship Maintenance and Logistics databases (e.g., SKED, OMMS-NG, TDMIS, CDMD-OA)., • Knowledge of Configuration Management (CM) and life-cycle support concepts., • Technical writing experience, particularly with maintenance or logistics documentation., • Adept at learning new systems and terminology. Competencies: • Proficiency in Microsoft Office, specifically, Word, Excel, PowerPoint, and Outlook software., • Excellent verbal and written communication skills, as well as presentation skills., • High comfort level working with and around all military/organizational levels, clients, customers, suppliers, and visitors., • Must be highly reliable and demonstrate personal initiative to operate in a fast-paced environment with changing priorities. Additional eligibility requirements Work authorization/security clearance requirements: Active Secret clearance is required. Other Duties: Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Supervisory Responsibility: None Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, and photocopiers. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. Excellent listening skills are essential. The employee frequently is required to stand, walk, use hands to finger, handle or feel, and reach with hands and arms. Must be able to lift up to 20 lbs. Position Type/Expected Hours of Work: The typical workday is eight hours in length. Some flexibility in hours is allowed, with concurrence from the supervisor. Attendance at prescheduled mandatory meetings is required. Must be available during the core work hours as determined by your contract/location and must account for the required number of hours in a pay period to maintain Full-time status. Telework: • Situational telework may be allowed for this position subject to customer requirements/expectations. Travel: • Ability to travel CONUS; potential to travel OCONUS, • Travel up to 10% may be required Benefits and Additional Compensation: KMS offers a competitive benefits package including medical, dental and vision insurances, flexible spending account, PTO, paid holidays, military leave, bereavement leave, 401k / retirement savings plan, professional development and tuition reimbursement, basic and voluntary life insurance / AD&D, short-term and long-term disability, voluntary AFLAC supplemental insurance products and employee assistance plan (EAP) program. Additionally, KMS offers employee referral bonuses and a discretionary annual bonus. AAP/EEO Statement: KMS Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. KMS Solutions is a drug free workplace. #ZR #LI-KMS

Job Description We have an exciting opportunity for an Engineering Technician III at UL Research Institutes, based in our Sharon Hill, PA, office. The Engineering Technician is responsible for preparing and maintaining research facilities, equipment, instrumentation and assisting with conducting and documenting experiments for the Fire Safety Research Institute (FSRI), a UL Research Institute (ULRI). The Engineering Technician follows defined test plans and protocols, operates and maintains power tools, heavy equipment, specific test equipment, communicates with other research staff during setup and operation to ensure proper and safe operations, and provides feedback to research staff regarding procedures or equipment issues. May include instrumentation and equipment design that involves unique features and the use of independent judgment. May initiate recommendations for new equipment designs and recommend solutions to observed issues. May conduct training to other research and technician staff members on equipment, instrumentation and/or safety procedures during day-to-day operations or testing. May assist with the planning of experiments. Responsible for maintaining safe working conditions daily: in the laboratory, in the workshop and in the field during all aspects of the job function at hand. May require travel to the field for the conduction of experimental series when not held at a fixed facility. UL Research Institutes: At UL Research Institutes (ULRI), we expand the boundaries of safety science to create a more secure and sustainable world. For more than a century, we have studied the unintended consequences of innovation, designed solutions to mitigate risk and shared our findings with academia, scientists, manufacturers, and policymakers across industries. We identify critical safety and sustainability issues, asking the tough questions because we believe a safer world begins with knowledge. Build a safer, more secure, and sustainable future with us. Join us and work with our Fire teams who conduct the research required to produce that knowledge and put into practice. Fire Safety Research Institute (FSRI) UL’s Fire Safety Research Institute (FSRI) advances fire safety knowledge to address the world’s unresolved fire safety risks and emerging dangers. As part of UL Research Institutes, we are committed to sharing our fire safety insights with everyone to advance UL’s public safety mission of providing safe living and working environments for people everywhere. Through advanced fire science, rigorous research, extensive outreach, and education in collaboration with our international network of partners, we share with stakeholders the information, tools, and resources that enable them to make better, more fire-safe decisions that ultimately save lives and property. To learn more, visit FSRI.org. What you’ll learn and achieve: As the Engineering Technician III, you will play a key role in the rapid growth of UL as you: • Responsible for the setup and performance of equipment and instrumentation. Builds and/or adapts equipment for any given experimental series. Assembles fuel packages and needed instrumentation following schematics, wiring diagrams, using measuring instruments, and operational instructions. Follows basically defined instrumentation plans and test protocols., • Builds and/or adapts research test fixtures, equipment or instrumentation to new situations, based on instructions from senior research staff or engineers., • Examines, maintains and repairs instrumentation and learns to the principle of operation for each type of device with necessary supervision/support. Communicates with researchers during setup and experimentation to ensure proper operation., • Operates designated machines, power tools, heavy equipment and specialized research equipment. Performs routine maintenance and repair of designated test equipment, shop and research facilities area. Performs calibration of test equipment., • Reads and understands specific test standards and testing technology and protocols for scope of responsibility with necessary supervision/support., • Initiates recommendations for new equipment designs and recommends solutions to observed problems., • Develop and execute operating, maintenance, and testing procedures in accordance with laboratory standards and safety regulations., • Design, modify, and build specialized research equipment and test setups based on project requirements and test specifications., • Prepare material and purchase requisitions; recommend solutions to technical issues encountered during testing or setup., • Communicate with researchers to understand project requirements and discuss testing methods, equipment usage, and preliminary results., • Install, maintain, calibrate, and troubleshoot equipment and systems used in research and field applications., • Maintain accurate and thorough documentation of test procedures, results, and design modifications., • Collaborate with interdisciplinary teams including research staff and technicians., • Ensure compliance with internal safety policies and applicable regulatory standards., • Maintain inventory of tools, parts, and specialized testing equipment., • Perform additional duties as assigned. What you’ll experience working at UL Research Institutes: We have pursued our mission of working for a safer, more secure, and sustainable world for nearly 130 years, embedding conscientious stewardship into everything we do. · People: Our people make us special. You’ll work with a diverse team of experts respected for their independence and transparency and build a network, because our approach is collaborative. We collaborate across disciplines, organizations, and geographies to build the global scientific response that today’s global challenges require. · Interesting work: Every day is different for us here. We see what’s on the horizon and use our expertise to build the foundations of a safer future. You’ll have the opportunity to push the boundaries of human understanding as part of a team working to advance the public good. · Grow and achieve: We learn, work, and grow together through targeted development, reward, and recognition programs. · Values. Four core values guide our work: collaboration, respect, integrity, and beneficence. By living our values, we inspire the trust essential to fulfilling our mission and foster the partnerships that enable us to pursue a beneficent future in which we all can thrive. · Total Rewards: All employees at UL Research Institutes are eligible for bonus compensation. We offer comprehensive medical, dental, vision, and life insurance plans and a generous 401k matching structure of up to 5% of eligible pay. Moreover, we invest an additional 4% into your retirement saving fund after your first year of continuous employment. Depending on your role, you may be able to discuss flexible working arrangements with your manager. We also provide employees with paid time off, including vacation, holiday, sick, and volunteer days. What makes you a great fit: While no one candidate will embody every quality, the successful candidate will bring many of the following professional competencies and personal attributes: • Solid understanding of engineering and construction principles across multiple disciplines (mechanical, electrical, civil)., • Demonstrated proficiency in the fabrication and programming of small-scale electronics, electrical systems or equipment., • Proficiency with CAD software and familiarity with measurement instruments and technical tools., • Strong analytical and problem-solving skills with the ability to troubleshoot complex systems., • Excellent attention to detail and precision in documentation and data analysis., • Effective verbal and written communication skills, including the ability to explain technical concepts to non-technical personnel., • Collaborative team player with a customer-service mindset., • Ability to adapt to diverse project requirements and emerging technologies., • Strong time management and organizational skills; able to handle multiple priorities in a fast-paced environment., • Demonstrated ability to deliver high-quality work and collaborate effectively with engineering and technical teams., • Hands-on experience or working knowledge in at least one of the following trades: mechanical, electrical, or construction. · Demonstrated knowledge of safe machine and power tool operation. · Demonstrated knowledge of building construction techniques. · Demonstrated knowledge of measurement instrumentation and troubleshooting techniques. · Demonstrated knowledge of OSHA safety requirements. Professional education and experience requirements for the role include: • Bachelor’s degree in engineering technology, Mechanical/Electrical Engineering, or a related field; or an equivalent combination of education and experience., • Minimum of 4 years of directly related experience in an engineering or technical support role. · Knowledge or interest in Electronics, Electrical Systems, Programming, Chemistry, Materials Science, Mechanical Engineering, Fire Science, Fire Protection or Chemical Engineering, Building Construction, Mechanics, Fabrication · Knowledge of one or more of the following trades: construction, electrical, mechanical, etc. • Familiarity with electronics or electrical systems, components and equipment., • Basic programming knowledge preferred (e.g., Python, LabVIEW, or similar)., • Valid firefighting certification preferred., • Commercial driver’s license (CDL) preferred., • Experience operating or maintaining heavy machinery is a plus. About UL Research Institutes and UL Standards & Engagement UL Research Institutes and UL Standards & Engagement are nonprofit organizations dedicated to advancing safety science research through the discovery and application of scientific knowledge. We conduct rigorous independent research and analyze safety data, convene experts worldwide to address risks, share knowledge through safety education and public outreach initiatives, and develop standards to guide safe commercialization of evolving technologies. We foster communities of safety, from grassroots initiatives for neighborhoods to summits of world leaders. Our organization employs collaborative and scientific approaches with partners and stakeholders to drive innovation and progress toward improving safety, security, and sustainability, ultimately enhancing societal well-being. Our affiliate, UL Solutions, stands alongside us in working for a safer and more sustainable world. UL Solutions conducts testing, verification and certification, and provides training and advisory services, along with data-driven reporting and decision-making tools, for customers around the world. To learn more, visit our websites UL.org and ULSE.org. #LI-BL1

Job Description CM3 Building Solutions (“CM3”) is currently searching for an energized, experienced Sales Executive to manage and expand our Central/Northern New Jersey Building Automation Solutions business. In this high profile role, you will grow our bundled services approach by deepening relationships with new and existing contractor clients, engineering firms and mechanical contractor relationships, to partner on their facilities and new construction projects. Responsibilities include: Successfully position CM3 to secure targeted projects in the territory through proven and effective sales strategies, while partnering to bundle solutions when appropriate. Develop technical proposals, estimates, and Sales presentations in coordination with operations, finance, marketing, and other inside and outside resources as needed to obtain the sale. Networking through professional organizations such as ASHRAE, AEE, or USGBC to build contacts and achieve sales targets. Assist consultant engineers with Sequence of Operations and Specification development for Building Automation Systems Develop and deploy account management strategies and prepare annual technology roadmap for current contractors, consultants, and prospective clients. Work through details and documentation to ensure a smooth transition from sales to operations for all sold projects. Prepare accurate and thorough sales activity reports, forecast reports, and expense tracking. Assist with installation, collections, and other customer satisfaction issues. Qualifications: High School Diploma or GED; Bachelor’s degree in engineering preferred; 3 or more years experience in HVAC controls sales experience. Technical and financial expertise and experience to estimate and sell technical solutions and service product lines. Must be at least 21 years of age and have a valid Driver’s License in good standing. Applicants must be legally authorized for employment in the United State. Perks & Benefits: A competitive base salary plus a generous, commission plan • Excellent health, vision, and dental plans • Life Insurance, Short-term/Long-term disability, and generous paid time off policy • 401k match with both company match and annual defined contribution • Monthly car allowance • Equal Employment Opportunity Statement CM3 Building Solutions is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Job DescriptionHoltec International, a turnkey supplier of technologies for the nuclear and sustainable energy industries, is seeking to add a structural engineer/analyst to its Applied Mechanics Group with opportunities to contribute to Holtec’s first of a kind small modular reactor (SMR) design. Come join a growing multidisciplinary team of engineers designing the next generation nuclear power plant. The engineer would be called upon to analyze metallic, reinforced concrete, steel-concrete composite and soil-subgrade supported structures. The analyses will support engineering requirements, leading to the licensing and construction of SMR-300 plants across the globe. The engineer will use and learn various methods and software to perform the analyses. SPECIFIC AREAS OF RESPONSIBILITY • Execute and document analyses for a variety of structures, systems and components (SSCs), • Review available concept designs based on an ambiguous set of requirements, then develop them into mature designs by critical thinking, literature research, interacting with members from other disciplines and vendors, and any analyses as permitted by project milestones, • Support the preparation of design deliverables, presentations, and communicate design progress in stakeholder meetings, • Static and dynamic finite element analyses (FEA) using ANSYS, LS-DYNA and STAAD.Pro, • Drop and impact (e.g., missile and aircraft) analyses and target response development using LS-DYNA, • Simulation of the seismic response of freestanding structures in air or submerged in water, • Static and dynamic analyses of large reinforced concrete or steel-concrete composite structures, • Soil-structure interaction (SSI) and fluid-structure interaction (FSI) analyses, • Must be a U.S. Citizen, • Applicant must possess a BS in Mechanical/Civil/Structural Engineering with a minimum of 4 years of experience. MS will count for 2 years of experience and Ph.D. will count for 4 years of experience (experience from MS and Ph.D. cannot be combined), • Familiarity with industry standards and design codes such as ASCE, ACI, ASME and AISC, • Must possess excellent credentials in principles of solid mechanics, • Industrial experience in the latest stress analysis codes such as ANSYS, LS-DYNA and STAAD.Pro, • Prior nuclear industry experience including interactions with NRC or other regulatory authorities, • Experience in seismic and stress analysis of pressure vessels and rotating equipment Holtec International offers a competitive benefits package to eligible associates, which includes: • Medical, dental, and vision insurance, • 401(k) retirement plan with company match, • Paid time off and 11 Paid Holidays, • Company-paid life and AD&D insurance, • Employee Assistance Program, • Wellness resources and voluntary benefits, • Training and educational assistance As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Powered by JazzHR K2sDJ6OMcF

Job Description We have a strong preference for candidates based out of North Wales, Landsdale, Montgomeryville, Colmar, PA area DUTIES AND RESPONSIBILITIES • Position will spend 50% of the time performing Sales & Customer Service duties and 50% of the time doing Installation duties, as described below. • Regularly visit customer locations to assess need for additional product or parts requirements • Visit non-customer stores to determine interest in a no-cost, in-store trial • Communicate with customers to properly schedule surveys, installs, remodels, grand openings, and maintenance work • Determine most efficient routes and use of time to be productive with multiple customer store requests • Understand dispenser parts and designs, and survey stores with the correct placement and type of dispensers • Must have complete knowledge of all products, especially specialty or problem solving products like greens bag, corn bag, and meat bag • Maintain a follow up relationship with all stores to check on product satisfaction • Must have all order and dispenser forms completed on a timely basis • Must have customer sign Dispenser Loan Order form and turn in on a weekly basis to Accounting • Provide weekly report of daily activities to Supervisor • Install the correct dispensers in the proper manner in all stores assigned within the designated area • Submit expense reports on a timely basis • Design more efficient attachments for dispensers and communicate with office on these changes • Design more efficient shipping and routing methods to make dispenser installations as efficient as possible QUALIFICATIONS • Must be willing to travel extensively • Able to work independently • Excellent communication skills with customers and management • Able to read and write English well • Some mechanical ability to use tools and machinery, and some engineering ability to understand dispenser usage and types • Organizational skills and Map Reading to properly schedule routes, stores, and time WORK ENVIRONMENT: This position will travel via automobile to various store locations, and will spend the majority of the day in an outdoor environment Company DescriptionCrown Poly, Inc. was founded in 1991 and is headquartered in Los Angeles, CA (Huntington Park). The company was founded on, and continues to expand through innovation and manufacturing of patented supermarket packaging products. We are the market leader in value-added plastic packaging supplies and our patented Pull-N-Pak® produce bagging system maintains a U.S. majority market share of over 40% in its category. We have a second product line with our patented grocery bagging system, and have now introduced a retail consumer trash can liner. To learn more about Crown Poly, please click on the link below: Poly, Inc. was founded in 1991 and is headquartered in Los Angeles, CA (Huntington Park). The company was founded on, and continues to expand through innovation and manufacturing of patented supermarket packaging products. We are the market leader in value-added plastic packaging supplies and our patented Pull-N-Pak® produce bagging system maintains a U.S. majority market share of over 40% in its category. We have a second product line with our patented grocery bagging system, and have now introduced a retail consumer trash can liner.\r\n\r\nTo learn more about Crown Poly, please click on the link below:\r\n\r\n

Job Description Bala Consulting Engineers is a 200-person engineering firm headquartered just outside of Philadelphia in Wayne, PA with full-service offices in New York, NY, Boston, MA, Baltimore, MD and Washington, DC. Bala is a dynamic growth-oriented company, built on relationships with our clients, staff, and industry partners. At Bala you will enjoy an exceptional employee experience that results in a successful career based on collaboration, leadership, and personal development. As a multi-discipline engineering firm, Bala is a leader in innovative designs for building systems in High Rise, Mission Critical, Multi-Unit Housing, Commercial Office, Higher Education, Transportation, Adaptive Reuse and Life Science facilities. Successful candidates for this opportunity will have an entrepreneurial, driven, and complex problem-solving spirit who thrive on technical challenges and regularly strive for solutions. The Mechanical Engineer role is based in our New York City office. Bala offers comprehensive benefits: • Medical, Dental, and Vision insurance package, • 401(k) with employer match, • Employer Paid Life Insurance, • Up to (5) weeks of PTO based on years of experience and (8) paid holidays, • 8 hours of Volunteer Time Off, • Tuition and Licensure Reimbursement, • Federal Student Loan Assistance including match up to $5,250 per year, • Section 529 Plan (College Saving Plan), • Employee Referral Program This is a full-time role which qualifies for four days in the office and one day remote. Primary Duties: • Responsible for HVAC system concept selection, subject to approval of the Mechanical Department Manager and Project Manager., • Responsible for the quality of work produced by subordinate personnel., • Calculation of heating and cooling loads, duct static pressure and pump head calculations., • Ductwork and piping system selection and sizing., • HVAC Equipment selection and sizing., • Miscellaneous engineering calculations as required by project scope., • Generation of schematic diagrams and flow diagrams., • Specification writing, subject to review by the Mechanical Department Manager., • Writing reports and feasibility studies., • Attendance at design development and construction meetings., • Responsible for accurate and timely completion of the design., • Interfacing with clients, vendors and other disciplines., • Review of shop drawings, including responsibility for final disposition., • Conduct surveys., • General knowledge of applicable codes., • General knowledge of Energy Modeling., • Troubleshoot and execute assignments for multiple projects in a timely manner., • Effectively and collaboratively work across multiple departments and stakeholders to help gather requirements, plan and execute project requirements., • Maintain accurate records of design changes and project progress., • Participate in onsite client visits including and not limited to project scope walks, meetings, testing, commissioning, startup support, and trouble shooting., • Assist with client proposals and Proposal developmentQualifications and Skill Requirements:, • 7-10 years of experience, • Professional Engineer (PE license) preferred, • Proficiency in Revit and AutoCAD, • Strong knowledge of applicable codes, • LEED certification is a plus, • Detail-oriented, • Ability to take direction and act independently, • Ability to work as part of a team., • Ability to manage multiple priorities and stay organized, • Experience solving complex problems with little to no supervision and on schedule as an individual or as a member of an integrated team, • Experience in the management and execution of multiple projects in Revit and AutoCAD, • Excellent technical, presentation and client interface skills, • Up to date with advancements in mechanical engineering technology and techniques, • Seek opportunities to innovate and improve existing designs and processesEducation Requirement(s): #LI-Onsite

Job Description The Hydraulic Field Service Engineer supervises installation, upgrades, and troubleshooting of moderate to complex hydraulic, pneumatic, and electronic equipment servicing systems in the industrial and environments. Extensive travel is required. Travel assignments frequently include overnight and extended periods away, or maybe on an on-call basis. Requires 3-5 years of experience in the field or in a related area. May require a degree or certification in an area of specialty. Has extensive knowledge of commonly used concepts, practices, and procedures within the hydraulic scope related to power generation and other hydraulic systems. Relies on instructions and pre-established guidelines to perform the functions of the job. Reports to the Field Service Manager. Responsibilities: • Provide on-site commissioning guidance for integrated Airline manufactured systems. This includes system installation, start up and tuning., • Manage power generation commissioning schedules for hydraulic field installations in coordination with project managers, field service coordinator, and field service manager., • Install, repair, and perform diagnostic testing and troubleshooting of moderate to complex hydraulic, pneumatic, and electronic components or systems at customer worksites, • Provide upgrade solutions for the offshore communication and power generation sectors, along with other industrial and Mobile customers, • Ensure safe practices at all times while on-site with customers., • Prepare detailed electronic field service reports utilizing Microsoft Office and/or ERP software. Reports will include records of materials used, hours worked, travel expenses, and other project-related data., • As a representative of Airline Hydraulics, communicate professionally and effectively with customers, co-workers, vendors, and subcontractors in an occasionally stressful environment., • Work overtime as required to complete projects., • Complete all job-related training classes as assigned., • Aid with emergency service and preventative maintenance of integrated hydraulic & Electronic systems, • Remote troubleshooting, when necessary, • Assist/oversee work at Airline service and repair shop locations if field work is unavailable., • As a representative of Airline Hydraulics, communicate professionally and effectively with customers, co-workers, vendors, and subcontractors in an occasionally stressful environment., • Provide customers with electro-hydraulic equipment training. Complete all job-related training classes as assigned., • Perform other essential and related duties as assigned. Requirements: • A valid driver’s license is required, and an acceptable motor vehicle report (MVR). The MVR will be obtained at the company’s expense., • A valid passport is required for international travel., • Mechanical or Electrical Engineering degree and/or equal technical experience, • 5-10 years of experience in the power generation field service, including experience with the service of both hydraulic and electronic products and systems, • IFPS Certified Fluid Power Specialist or Engineer, preferred., • Thorough working knowledge of hydraulic components, including knowledge of Bosch Rexroth components., • PLC program set up and troubleshooting is a plus, but not necessary, • Ability to interpret and analyze complex electro-hydraulic schematics., • Proficient AC/DC circuitry knowledge., • Available for international and domestic travel as needed overnight, for extended periods of time or on an “on-call” basis; overnight stay can include hotels as well as on board vessels as necessary., • Strong computer skills. Capable of working with Microsoft Office and a variety of applications., • Strong time management and organization skills. Must be able to work independently and successfully complete multiple assignments in a deadline-driven environment., • Strong communication skills. Must be capable of using written and verbal communications to effectively convey plans and specific details to internal and external customers., • Ability to work in difficult physical and stressful situations for extended periods of time., • Responsible for upkeep of company vehicles and scheduling required maintenance through the Enterprise Fleet Program., • Perform duties safely and in accordance with Airline Hydraulics and the customer’s safety guidelines and regulations., • Share vision and growth opportunities, and experience with the management team Benefits: • Medical/Dental/Vision/Disability effective first of the month after the hire date, • PTO accrual begins upon hire, • Referral bonuses, • 100% employee-owned plus 401k with company match

Job DescriptionCompany Description At CRB, we design and build some of the most powerful facilities in the world — those that change people's lives. We are the leading provider of sustainable Engineering, Architecture, Construction and Consulting solutions to the global life sciences and food and beverage industries. Our employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description The Entry-Level Process Engineer focuses on the design and engineering of manufacturing facility and equipment, supporting facility infrastructure and critical utility systems. Typical tasks include execution of engineering calculations including heat transfer and pressure drop calculations. The Entry-Level Process Engineer is responsible for supporting the documentation of the process design scope in coordination with other disciplines. The Entry-Level Process Engineer may support field installation teams and execute construction site observations. This role is expected to work closely with other architects, engineers and designers, as well as other internal and external team members to ensure a coordinated, constructible and complete design. Core Activities * Supports the documentation of the process design scope in coordination with other disciplines. * Works closely with other architects, engineers and designers, as well as other internal and external team members to ensure a coordinated, constructible and complete design. * Self-checks own work but communicates often with peers and Supervisor. * Able to work on one or more projects concurrently and manage time effectively. * Solves complex problems under the direction and supervision of a mentor or supervisor * Project work may include all levels of design such as studies, conceptual and schematic design, design development, construction documentation and construction administration. Works on matters of basic complexity in a support role under the direction of more experienced Process Engineers. Engineering deliverables include: * Block and Process Flow Diagrams * User Requirements Specifications * Equipment List * Equipment General Arrangements * Equipment Datasheets * Utility Summary * Piping and Instrumentation Diagrams (P&IDs) Qualifications • Bachelor’s degree in Mechanical, Chemical, or Bioprocess Engineering from an ABET-accredited program, • 0–3 years of experience in a design firm or related engineering environment, • Registration for or successful completion of the Fundamentals of Engineering (FE) exam preferred, • Willingness to relocate to one of our office locations: Massachusetts (MA), Pennsylvania (PA), Orange County (OC), San Diego (SD), or St. Louis (STL) Preferred Qualifications * Fundamental experience with performing engineering calculations, developing and implementing list of discipline systems designs * Fundamental experience with chemistry/biochemistry * Fundamental experience with process modeling, material and energy balances and basic sizing calculations * Fundamental experience with fluid mechanics, hydraulic modeling and fundamental heat transfer * Strong communication skills and ability to participate in internal cross-discipline project team coordination * Proficient at fundamental discipline design calculations under the supervision of an engineer * Proficiency in AutoCAD * Proficiency in Microsoft Office suite required * Proficiency in engineering software applications including computer-aided drafting, process modeling and calculation programs Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Description Who We Are Jaros, Baum & Bolles (JB&B) is a MEP engineering firm headquartered in New York City with additional offices in Boston and Philadelphia. For over 100 years, JB&B has leveraged cutting-edge technologies with sound engineering practices to create building designs that have transfigured the skyline, reimagined healthcare, and brought us closer to a sustainable, low-carbon future. We foster a collaborative, high-performing culture in which our employees share the common goal of creating a progressive, inclusive and fun work environment. JB&B values the voices and opinions of our employees. We are a team. We are a community. About the Role We are seeking an Associate to join the HVAC department in our Philadelphia office. This role will manage a variety of projects from concept to completion, and will work with upper management on staff development, firm marketing, and efforts to sustain and develop business at JB&B. As an Associate in the HVAC Department, you’ll lead project teams, mentor junior staff, and collaborate with firm leadership to deliver high-quality mechanical engineering solutions. Key Responsibilities: • Collaborate with the Department Leader to develop conceptual designs and guide projects through completion, • Act as the primary day-to-day client contact for assigned projects, • Manage and review all project-related documents to ensure accuracy and timely delivery, • Oversee technical and functional quality of project deliverables, • Present and explain project designs confidently in internal and external meetings, • Coordinate and update project teams to meet design expectations and deadlines, • Initiate and manage design changes, proposals, and approvals, • Bachelor’s degree in electrical or mechanical engineering, • 8-14 years of engineering experience, • Proficient in all design calculations and software tools (e.g., Revit and AutoCAD) applicable to your discipline, • Strong project management and leadership skills, • Strong understanding of trade-specific scope of project, trade-related codes, and the required coordination with other trades Our employees are our greatest strength. We invest in our people and support their needs by providing the following benefits: • Hybrid workplace offering the flexibility to work both from home and the office, • Comprehensive benefits package including 401k employer match, • Paid time off (PTO), paid parental leave and inclusive holidays, • Training and professional development courses through JB&B University, • Multiple employee resource groups Jaros, Baum & Bolles is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR Mq3dmiLIsn

Job DescriptionNDI Engineering Company is seeking an Electrical Engineer to join our team supporting the design of US Navy test facilities, as well as other design projects. Position to be performed on-site at our Thorofare, NJ, office. The ideal candidate will have experience in design of Naval Ship Hull, Mechanical and Electrical (HM&E) systems or power plant systems; have experience supporting design projects, particularly in AutoCAD; have experience applying the NEC; demonstrate an attention to details; and, possess strong communication skills. Job Responsibilities • Review and incorporate customer furnished information from scoping documentation., • Conduct site investigations in an industrial environment., • Conduct and document analysis supporting the suitability of electrical designs and make recommendations with engineering sketches of concepts which address design issues., • Review and check engineered drawings of electrical systems., • Participate in design meetings with the project team and customers.Minimum Requirements, • Must be a U.S. Citizen and be able to obtain and maintain a U.S. Department of Defense Security Clearance., • Must possess a Bachelor of Science in Electrical Engineering degree; Professional Engineer or Engineer in Training Certification preferred but not required, • Must have at least 5 years of electrical engineering experience., • Must have AutoCAD experience; Must have experience using Microsoft Office and Outlook. OBhNax3wJi

Job Description My client is a top notch MEP Consulting Engineering firm actively seeking a Mechanical Engineer with HVAC design and engineering expertise. Autocad and REVIT a plus! EIT or PE a plus! Your consulting engineering ability is what my client seeks! HVAC and Mechanical aptitude. #midsenior #Libertyjobs #CIVILMEP #ConsultingEngineer #HVAC

Job Description The technician position requires the wiring of electronic components, electrical panels, and devices. Use of small hand tools, ability to read a tape measure. Reports to subassembly floor supervisor. Responsibilities: • Wiring electrical control panels efficiently in a high-volume production setting, • Reading and interpreting electrical schematics and B.O.M./drawings, engineering prints/specifications, and/or verbal/written instructions, • Responsible for laying out, machining, populating, and wiring of electrical control enclosures, • Assembly of mechanical, and/or pneumatic components as required., • Use common hand tools, drills, taps, saws, knockout punches, and multi-meter., • Verify work performed by checking continuity or simulated functional test to determine proper component circuitry that meets operational requirements, • Must have experience using the skills mentioned above, • Experience in wiring electrical control panels, UL 508A experience is a plus., • Read and interpret schematics and electrical specifications as required., • Working knowledge of AC & DC control circuits, including single and three-phase motor control, PLC terminology/function, and basic knowledge of measuring instruments and meters., • The ability to work with and understand electromechanical functionality, • Knowledge of applicable codes, standards, and regulations., • Good interpersonal skills and ability to successfully handle a multi-tasked role in an organized fashion., • Strong computer skills. Capable of working with all Microsoft Office applications, • Medical/Dental/Vision/Disability effective first of the month after the hire date, • PTO accrual begins upon hire, • Referral bonuses, • 100% employee-owned plus 401k with company match

Job Description Building Engineer Location: 1400 N Providence Rd, Media, Pennsylvania 19063 Schedule: Onsite daily, Monday – Friday, 6:30 am – 3:30 pm ET Compensation: $30 – $37/hour, with eligibility for 1.5x overtime pay Reports to: Property Manager or Chief Engineer Property Overview This two-building, 270,000 sq ft office campus in Media, PA has recently undergone a full-scale redevelopment to create a modern and collaborative work environment. The property features twin four-story and six-story atriums, newly renovated lobbies and corridors, a tenant fitness center, grab-and-go market, outdoor patio, and conference facilities. These enhancements have positioned the campus as a premier office destination in a highly competitive suburban Philadelphia market. Job Summary The Building Engineer is responsible for the reliable operation and maintenance of the property’s critical building systems, ensuring tenant comfort, safety, and satisfaction. This role requires both technical expertise and hands-on execution, with a focus on delivering consistent, high-quality building services. Essential Functions and Responsibilities • Oversee daily building operations and maintenance across the campus, ensuring all systems operate efficiently., • Operate, monitor, and adjust mechanical systems including HVAC, boilers, refrigeration, chilled water, emergency backup systems, electrical systems, and hot water systems., • Perform preventive maintenance and repairs on critical systems and equipment with minimal tenant disruption., • Conduct plumbing, piping, electrical, and mechanical repairs as needed, including pumps, motors, compressors, valves, and controls., • Support tenant improvements and construction projects while maintaining system performance., • Perform general building maintenance tasks such as lighting replacement, painting, and basic repairs., • Communicate effectively with management and tenants on project status and system operations., • High school diploma or equivalent required; technical certifications preferred., • Minimum 5 years of commercial building maintenance or engineering experience., • Strong HVAC knowledge; certification strongly preferred., • Valid state driver’s license; Black Seal license may be required., • Ability to perform physically demanding tasks including climbing, lifting, and carrying equipment., • Strong customer service and communication skills., • Onsite interview (60–90 minutes) with the Property Manager., • Medical, • Dental, • Vision, • PTO, • 401K, • OT pay

Job DescriptionCompany Description CRB's over 1,100 expert professionals drive innovative, life-changing and life-saving solutions for manufacturers in the life sciences and food and beverage industries. Our mission, vision, and core values put client satisfaction and employee experience at the center of everything we do. As an AEC Firm we proudly specialize in industries that inherently carry important social responsibility - we recognize our impact and influence in the communities we serve and pursue corporate responsibility through the lens of people, community, and planet. From oncology and rare disorders to COVID-19 or alternative proteins, our design and construction projects are pioneering solutions addressing important issues such as food scarcity and global health. Job Description The Mechanical Engineer focuses on the design and engineering of HVAC and mechanical utilities for buildings. The individual possesses demonstrated ability to manage multiple complex tasks, coordinate with internal and external parties, establish priorities and direct the work of others. Typical tasks and deliverables that are executed by or under the supervision of the Mechanical Engineer V include site selection, master planning, commissioning and startup, load calculations, utility assessments, energy modeling, design reports, code evaluations, plans, P&IDs, schedules, HAZOP reviews, installation details, equipment and system selection and specification, and coordination with manufacturers and trade partners. Project work includes directing design activities for all levels of design such as studies, conceptual and schematic design, design development, construction documentation and construction administration. The Mechanical Engineer V understands the development and field implementation of documents through all project phases, sizes and levels of complexity. Within this role there are multiple positions, and their focuses are described below. The Senior Lead Mechanical Engineer is responsible for providing oversight for the discipline at a project, office and regional level. The Senior Lead oversees the Mechanical discipline scope of work and manages the discipline budget on all project phases, sizes and levels of complexity, and directs and manages the workflows and execution of design and engineering support staff (Entry-Level to Senior) to meet client expectations and project goals. The Senior Lead Engineer may work independently or at the direction of the Project Manager Responsibilities • Directs and manages the workflows and execution of design and engineering support staff (Entry-Level to Senior) to meet client expectations and project goals., • Coordinates with internal and external parties, manages multiple complex tasks, establishes priorities and directs the work of others., • Works with a Project Manager on proposal development, design task identification, man-hour planning and project scheduling for the discipline scope of work on advanced level projects., • Identifies and resolves advanced non-compliant existing conditions during site walks and construction field surveys., • Attends external seminars/conferences for professional development., • Develops advanced internal mechanical design and engineering training presentations., • Develops narratives, reports and construction drawing packages and writes construction specifications on advanced and complex projects without oversight., • Provides lead and advanced support of construction activities such as RFI responses, submittal reviews, punch list development and construction progress reports., • Conducts technical and leadership interviews., • Conducts quality checking of documents for advanced complex projects (e.g., technical verification of design calculations and documentation) and drives overall project quality., • Provides mentorship to less experienced Mechanical Engineers and/or Designers., • Leads advanced project system design programming and master planning with minimal or no support from Senior Engineer., • Leads a team of mechanical staff in the execution of advanced projects discipline design and engineering., • Provides oversight and technical leadership to other offices and related functions such as Business Development, Technical Advancement and Vertical Markets., • Provides industry-level perspective and guidance to frame business strategy in the face of evolving technology or client buying behaviorQualifications Minimum Qualifications • ABET-accredited Bachelor’s degree in Mechanical Engineering or Architectural Engineering (with a mehanical focus), • Minimum of 15 years of experience for Senior Lead position, • Minimum of 20 years of experience for SME position, • Professional Engineer registration in good standing, • Expert experience with performing engineering calculations, and developing and implementing HVAC, mechanical utility and piping systems designs, • Proficiency in Microsoft Office suite, • Advanced experience with using and applying the mechanical/plumbing/fire/building codes, • Advanced experience using and applying applicable industry standards (ASHRAE, SMACNA, ISPE, FDA, ISO, NFPA, OSHA, etc.), • Proficiency in Revit, • Life Sciences (Pharmaceutical, Biotech, Laboratory) or Food & Beverage industry experience, • Advanced knowledge of cGMPs and/or experience with advanced technology industry projects such as R&D labs, biotechnology, pharmaceutical, food and beverage, and/or consumer products, • LEED, WELL or other sustainable design accredited professional or, experience with sustainable design, • Proficient with advanced internal and external cross-discipline project team coordination, • Proficient with advanced coordination with construction trade partners, vendors and manufacturers, • Advanced experience with troubleshooting issues with mechanical systems Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job DescriptionCompany Description CRB's over 1,100 expert professionals drive innovative, life-changing and life-saving solutions for manufacturers in the life sciences and food and beverage industries. Our mission, vision, and core values put client satisfaction and employee experience at the center of everything we do. As an AEC Firm we proudly specialize in industries that inherently carry important social responsibility - we recognize our impact and influence in the communities we serve and pursue corporate responsibility through the lens of people, community, and planet. From oncology and rare disorders to COVID-19 or alternative proteins, our design and construction projects are pioneering solutions addressing important issues such as food scarcity and global health. Job Description The Mechanical Engineer focuses on the design and engineering of HVAC and mechanical utilities for buildings. The individual possesses demonstrated ability to manage multiple complex tasks, establish priorities and direct the work of others. This position is responsible for overseeing the Mechanical discipline scope of work and managing the discipline budget on all project phases, sizes and levels of complexity, and coordinating with internal and external architects and engineers, as well as clients, construction managers, subcontractors, vendors and manufacturers. Typical tasks and deliverables that are executed by or under the supervision of the Mechanical Engineer IV include site selection, master planning, commissioning and startup, load calculations, utility assessments, energy modeling, design reports, code evaluations, plans, P&IDs, schedules, HAZOP reviews, installation details, equipment and system selection and specification, and coordination with manufacturers and trade partners. Project work includes directing design activities for all levels of design such as studies, conceptual and schematic design, design development, construction documentation and construction administration. The Mechanical Engineer IV understands the development and field implementation of documents through all project phases, sizes and levels of complexity. Within this role there are multiple positions, and their focuses are described below. The Mechanical Engineer is responsible for overseeing the discipline at a project level and managing the project discipline budget on simple to complex projects of all sizes. The Mechanical Engineer may work independently or at the direction of the Project Manager. The Mechanical Engineer acts as the Engineer-of-Record and is responsible for directing and managing the workflows and execution of design and engineering support staff (Entry-Level to Senior) to meet client expectations and project goals. Responsibilities • Interfaces with client and external partners., • Works closely with other architects, engineers and designers, as well as other internal and external team members to ensure a coordinated, constructible and complete design., • Works with a Project Manager on proposal development, designs task identification, man-hour planning and project scheduling for the mechanical scope of work on projects., • Conducts and leads field surveys of existing conditions and support of field reporting., • Identifies and resolves intermediate non-compliant existing conditions during site walks and construction field surveys., • Develops narratives, reports and construction drawing packages and writes construction specifications on large projects of advanced complexity with no oversight., • Provides lead and advanced support of construction activities such as RFI responses, submittal reviews, punch list development and construction progress reports., • Conducts quality checking of documents for intermediate complex projects (e.g., technical verification of design calculations and documentation) and drives overall project quality., • Utilizes various platforms to execute work, such as Microsoft Office products and available BIM software., • Provides mentorship to less experienced Mechanical Engineers and/or Designers., • Attends professional development activities., • Leads advanced project system design programming and master planning with support from Senior Engineer., • Leads a team of mechanical staff in the execution of advanced projects discipline design and engineering.Qualifications Minimum Qualifications • ABET-accredited Bachelor’s degree in Mechanical Engineering or Architectural Engineering (with a mechanical focus), • Minimum of 10 - 15 years of experience, • Professional Engineer registration in good standing, • Advanced experience with performing engineering calculations, and developing and implementing HVAC, mechanical utility and piping systems designs, • Life Sciences (Pharmaceutical, Biotech, Laboratory) or Food & Beverage industry experience, • Advanced knowledge of GMP manufacturing environments, • Proficiency in Revit and AutoCAD, • Proficiency in Microsoft Office suite, • LEED, WELL or other sustainable design accredited professional or, experience with sustainable design, • Intermediate experience with using and applying other applicable industry standards (ASHRAE, SMACNA, ISPE, FDA, ISO, NFPA, OSHA, etc.), • Advanced experience conducting and leading field surveys of existing conditions and support of field reporting, • Advanced experience in plumbing design, • Basic experience using Revit plugins such as Enscape and Unifi, • Basic experience building parametric workflows using Dynamo, Grasshopper, and/or Rhino within Revit, • Proficient with advanced internal and external cross-discipline project team coordination, • Proficient with advanced coordination with construction trade partners, vendors and manufacturers, • Intermediate experience with troubleshooting issues with mechanical systems, • Ability to develop intermediate internal mechanical design and engineering training presentations, • Ability to travel for client development and project execution, and internal and external training opportunities Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job DescriptionNDI Engineering Company is seeking a Mechanical Engineer to support the design of US Navy test facilities. This position will be based out of our office in Thorofare, NJ. The ideal candidate will have experience in mechanical system design development, manufacturing, and/or testing, preferably in propulsion systems or mechanical machinery; have experience supporting design projects, particularly with development of finite element analyses (FEA) of structures; and demonstrate an attention to details. Job Responsibilities • Develop FEA models from CAD files with assistance from Senior Engineer, • Review design requirements and establish analyses criteria., • Conduct and document analyses supporting the suitability of designs; make design recommendations with engineering sketches of concepts to address design issues., • Review and check engineering drawings of propulsion system structures and/or machinery structures., • Communicate with others on the project team and with the customer’s technical personnel.Minimum Requirements, • Must be a US citizen and able to qualify for a DoD Secret clearance., • Must possess a Bachelor of Science in Mechanical Engineering degree and a minimum of 3 years of professional experience., • Work in the NDI Thorofare office is required., • Have strong verbal and written communications skills. R21hPVb1UO

Job Description Germantown Tool & Manufacturing began in 1955 as a small Philadelphia-based tool and die shop. With more than a half-century of experience, we have grown to become a diversified metal fabricator and supplier of metal engineering services. We supply a broad range of component parts and complete assemblies to a number of industries. Germantown Tool is looking for a Tool Maker. This position will be responsible for working with computer-controlled machinery and mechanical equipment to cut, shape, and finish tools made out of metal. Come join a Company with a true family feel, where you have the ability to make an impact on the business every day. BASIC FUNCTION: Design, build, and inspect jigs, fixtures, and dies in accordance with Product Engineering and Manufacturing Engineering requirements by performing the following duties. SPECIFIC & ESSENTIAL DUTIES: • Inspect parts made in fabrication or welding that are produced off of new tooling to determine conformity to specification., • Evaluate and critique part print specifications to ensure manufacturability of desired part., • Inspect tools, jigs, fixtures and gauging devices for proper orientation and processing., • Examine and inspect all types of parts, subassemblies, assemblies and finished products for dimensional, fit and function or evaluation of defects as assigned by supervisor., • Layout, plan and perform all bench and machine operations to construct, alter and repair tools, dies, fixtures, jigs and gages requiring skill and knowledge of tooling practices and application., • Perform close and exacting bench operations to fit, assemble, adjust, align, and finish work., • Design, fabricate and repair a wide variety of material handling equipment., • Studies specifications, eng. blueprints, tool orders, and shop data and confers with engineering and shop personnel to resolve design problems related to material characteristics, dimensional tolerances, service requirements, mfg procedures, and cost in assembly., • Train operators on the use of fixtures, inspection equipment, and procedures., • Assist in the design of assembly lines and work stations., • Assist in the design of prototype parts for manufacturability, • Order all tool room inventory, clamps, drills, material, and fasteners etc., • Perform other related duties as deemed necessary by the Supervisor., • High school diploma with basic mathematical skills required, • Requires the use of fairly complicated drawings, mathematics, handbook formulas, and variety of precision measuring instruments., • Experience in blueprint reading and CAD, • Programming experience for machine tools and EDM required, Laser programming preferred, • 5-10 years experience in metal fabrication or machining required, • Must be mechanically minded with a strong desire to learn and to accept new challenges PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls and reach with hands and arms. The employee frequently is required to stand, walk, and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision and the ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT: While performing the duties of this job, the employee frequently works near moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock, and vibration. The noise level in the work environment is usually loud. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, national origin, disability or protected veteran status or any other status protected by law. Job Posted by ApplicantPro

Job DescriptionAdvance your career with us and be part of a mission-driven team delivering critical telecommunications and recovery solutions. At InfraServices, we’re more than a services provider — we’re innovators, problem-solvers, and collaborators. Our culture is built on a foundation of safety first, guided by a customer-focused philosophy, and defined by excellence and integrity. Here, every voice is heard, fresh ideas are celebrated, and exceptional talent is valued. We’re committed to building an employee experience rooted in trust, respect, continuous learning, and growth opportunities. Whether you’re building cutting-edge infrastructure, supporting field operations, or driving business development, you’ll play a vital role in upholding our core values and delivering on our business objectives. The Lead Estimator – Mission Critical is a hybrid technical and commercial role combining cost estimating, solution engineering, and customer-facing support. This role is responsible for preparing accurate cost estimates, developing proposals, and serving as the technical liaison with customers to ensure Company solutions meet the demands of hyperscale, colocation, and enterprise data center projects. The ideal candidate will be within commuting distance of our Blue Bell, Pennsylvania headquarters. Essential Duties and Responsibilities: •Develop detailed take-offs, estimates, and cost models for civil, mechanical, electrical, and low-voltage scopes•Analyze drawings, bid documents, and technical specifications to identify risks, gaps, and value engineering opportunities•Prepare bid packages, RFP responses, and prequalification documents in support of business development•Participate in customer meetings, site walks, and RFP/Q&A sessions, providing technical clarifications•Build sales presentations, solution narratives, and technical diagrams to highlight the Company’s turnkey abilities •Collaborate with procurement, project managers, and operations to align estimates with execution strategies•Develop and maintain standardized cost libraries, estimating tools, and historical project data to improve accuracy and efficiency•Conduct competitive bid analysis and provide recommendations for supplier/subcontractor selection•Support value engineering initiatives by recommending cost-effective alternatives without compromising performance or reliability•Assist in developing pricing strategies and commercial terms in collaboration with the sales team •Provide technical sales support during negotiations, ensuring alignment between customer requirements and Company solutions•Track and analyze industry pricing trends, emerging technologies, and competitive market intelligence•Lead internal estimate review sessions with leadership to validate assumptions and ensure alignment with project execution strategies•Maintain relationships with OEMs, subcontractors, and suppliers for accurate pricing•Support project handoffs by providing budgets, clarifications, and scope notes•Other duties as assigned Supervisory Job Duties: •Carries out supervisory duties in accordance with the Company’s objectives, policies, and applicable laws. Responsibilities may include, but are not limited to, planning, assigning, and directing work, interviewing, hiring, training, evaluating performance, rewarding and disciplining employees, addressing employee concerns, and partnering with Human Resources to resolve escalated employee matters. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Education: •Bachelor’s degree in a relevant field from an accredited four-year college or university Experience: •Five years of cost estimating or sales engineering experience in data center or mission-critical environments•Experience preparing cost estimates for large-scale mission-critical infrastructure projects•Strong knowledge of mechanical/electrical systems, low-voltage, and civil/structural scopes•Prior experience supporting RFP/RFQ submissions and customer interviews in competitive bid environments•Familiarity with subcontractor/vendor qualification processes and bid leveling•Exposure to lifecycle cost analysis, total cost of ownership models, or CAPEX/OPEX evaluations•Demonstrated ability to collaborate across procurement, operations, and sales teams •Experience working directly with hyperscale, colocation, or enterprise data center customers preferred Technical Skills: •Computer and Microsoft Office proficiency•Proficiency in estimating software•Advanced Excel and data modeling skills for estimate preparation and cost analysis•Ability to read and interpret construction drawings, specifications, and bid documents•Familiarity with AutoCAD, Revit, or BIM tools for reviewing designs and extracting quantities•Strong understanding of project delivery methods•Knowledge of electrical, mechanical, and civil engineering principles relevant to data center design Soft Skills:•Strong communication and presentation skills with the ability to explain technical concepts to non-technical audiences •Analytical thinker with high attention to detail and accuracy•Ability to work under tight deadlines while managing multiple estimates and priorities•Strong negotiation and persuasion skills when dealing with subcontractors, suppliers, and customers•Collaborative mindset with the ability to build bridges across estimating, sales, and operations teams•Customer-focused approach with a consultative mindset•Problem-solving and value-engineering orientation•Executive-level communication, presentation, and negotiation skills Physical Requirements:•Must be able to pass pre-employment screening that includes background and drug testing•Must have a valid driver’s license and a driving record that meets Company requirements•Ability to travel nationwide up to 25% of the time, including occasional short-notice travel for site walks, customer meetings, and supplier engagement •Ability to sit and work at a computer workstation for extended periods (6–8 hours per day)•Ability to walk construction sites, data centers, or customer facilities, including climbing stairs and navigating uneven surfaces •Must be able to list up to 20 lbs. occasionally (e.g., drawings, sample materials, presentation materials, etc.)•Comfortable working in varied environments, including office settings, outdoor job settings, and mission-critical facilities with strict safety protocols •May be required to work irregular or extended hours, including evenings and weekends, depending on business needs Employee Benefits: At InfraServices, taking care of our people is a top priority. That’s why we’ve built a strong benefits program designed to support you and your family, giving you the security you deserve. We know benefits are an essential part of your overall compensation, and we’re committed to offering a competitive package that reflects the value you bring. Below is a quick look at what we offer. Medical, Dental, & Vision Benefits: We've got your health covered.Short- & Long-Term Disability Benefits: Protection when you need it most.Company Paid Basic Life Insurance: Additional voluntary benefits are available.Voluntary Accident, Voluntary Critical Illness, and Voluntary Hospital Indemnity Plans: Added security for you and your loved ones.Flexible Spending Accounts: Manage your finances with flexibility.Employee Assistance Program (EAP): Support when life throws challenges your way.401(K) with Company match: Building your financial future with us.Paid Time Off, Paid Sick Time, & Company Holidays: Achieving that work-life balance.Paid Parental Leave: Supporting your family is our priority.Employee Referral Program: Share the opportunities and reap the rewards.Company Discount Program: Enjoy savings on everyday expenses.Legal Assistance: Affordable legal support for employees. Disclaimer: All job requirements are subject to possible revision to reflect changes in the position requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSalary: WNA Engineering is a multi-faceted engineering design firm where we hold pride with our motto: Partnerships by Design As WNA continues to grow, we embrace our roots by embodying the beginnings of our company culture, creating, and thriving in a relaxed environment, all to take our client's project needs and produce innovative, sustainable and energy-efficient solutions. Your Impact WNA is seeking an experienced and motivated Senior Mechanical Engineer to join our Philadelphia-area Team. The ideal candidate will have the opportunity to work in a collaborative environment focused on safety and sustainable design. The candidate will have experience producing projects on time and on budget, high standards for quality and performance, and a thorough understanding of design and construction processes related to building site mechanical design and engineering. The Senior Mechanical Engineer will report to the Vice President of Engineering. Engineer Priorities • Lead in the preparation, development, and design of Mechanical HVAC Systems on a variety of MEP projects using applicable standards and codes., • Prepare all aspects of a project including but not limited to specifications, heating/cooling load calculations, building energy modeling, technical reports, cost and time budgets, while complying with all company standards and procedures., • Collaborate with and foster the skill development of our mechanical design and project team members, • Directly interface with clients and contribute to the overall business development of the company., • Professional Engineer (PE) License in the state of Pennsylvania is necessary for this position., • Required 6 to 20 years of direct experience designing Mechanical (HVAC) systems for building construction., • Strong understanding of all phases of project document development, production, drawings and specifications., • Demonstrate current and developed experience on MEP projects from design through final construction., • High level of personal integrity and professionalism in client relations and team communication., • Collaborative mindset and the desire to develop self and others, • Excellent facilitation, communication, and analytical skills Financial and Professional Development • Performance and Profit-sharing Bonuses, • Secure 401(k) with Employer Matching and Roth Options, • Project, Travel Expense and Credentialing Reimbursement, • Collaborative mentorship culture with multi-level experienced engineers, • Monthly Company Lunches and Annual Events, • Flexible Schedules with M/F Remote option, • Generous Paid Personal and Holiday PTO, • Healthcare and Life Plans with HSA Options, • Employee Referral Bonus Program, • Paid Parental Leave Benefit WNA offers a market-competitive compensation and total benefits package that includes bonuses, medical, dental and vision coverage, retirement and Roth options, employer contributions, and schedules with family and flexibility in mind. Salaries are based on experience, qualifications and skills.Progress your career with a company that inspires and empowers you to deliver your best work so you can evolve, grow and succeed - today and into tomorrow. WNA's Core Values lend to its commitment to forever be a strong proponent of equal-opportunity employment.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law. Your Right to Work In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. We are currently unable to support sponsorships. Note to Recruiters: Please respect the work environment WNA Engineering tries to provide and do not solicit our employees. You may contact our recruiting department directly at any recruitment inquiries. Thank you.

Job DescriptionDescription: Hadco Metal Trading Co., LLC distributes and supplies metal products including aluminum, stainless steel, carbon, related alloys, and mechanical grade plastics for general engineering, aerospace, and commercial markets. Hadco Metal Trading is hiring an Outside Sales Representative to grow our territory and business presence in the San Antonio and Austin Texas area. Role & Responsibilities: • Develop new prospects and interact with existing customers to increase sales., • Develop and maintain relationships with purchasing contacts., • Work closely with inside sales and purchasing to ensure quotes, material, and deliveries meet customer needs., • Maintain current knowledge of industry trends to identify opportunities for company growth., • Knowledge of the metals industry., • Minimum 2 years outside sales experience., • Possess impeccable communication skills, as well as organizational and time management skills., • Possess a strong professional work ethic., • Ability to work independently and as part of a team., • High level of self-motivation and awareness., • Ability to handle objections and provide alternatives in the sales process., • Base compensation and commission plan., • Growth opportunities with a stable and growing company., • Medical/dental/vision insurance., • Paid vacation, PTO, and holidays., • 401(k) with company match., • 100% paid life and disability insurance.

Job DescriptionBenefits: • Flexible Schedule, • Competitive Pay Responsibilities • Fully understand the project scope and requirements by studying documentation, meeting with clients, and visiting relevant locations, • Collect necessary documentation such as plans, drawings, and project specifications, • Determine the key variables for cost and conduct research to determine expected labor and materials costs, • Gather bids and negotiate with service providers to secure the best possible prices, • Create and submit estimates to project managers, • Budget and forecast using appropriate softwareQualifications, • Bachelors degree in mechanical engineering or a related field, • Certified Professional Estimator (CPE) is preferred, • Previous experience as an Estimator is preferred, • Ability to forecast building costs and knowledge of estimation formulas, • Strong mathematical and analytical skills, • Skilled in relevant software (Timberline, HCSS HeavyBid), • Excellent research, writing, and negotiation skills

Job Description The Fluid Systems Designer will develop, create, modify, and improve drawings and design documents to be utilized by the Hydraulic Power Unit and related production areas. To complete projects and assignments, the Designer will collaborate with Sales, Engineering, Production, Management, and related personnel. Additionally, you will provide mechanical design support for these and related functional areas. Such interaction will take place throughout the life of a design project, from development through implementation. Has knowledge of commonly-used mechanical concepts, practices, and procedures within a particular field and relies on instructions and pre-established guidelines to perform the functions of the job. Works under general supervision. A wide degree of latitude and creativity is expected. This position reports to the Design Manager. Responsibilities Responsibilities include but are not limited to the following. • Design hydraulic systems based on provided hydraulic schematics, bill of material (BOM), and related documents., • Provide documentation necessary to build and test hydraulic systems, including but not limited to schematics, BOMs, general arrangement drawings, test procedures, etc., • Review in detail customer-supplied specifications and supporting documentation, • Travel to Airline Hydraulics facilities, customers, and suppliers as necessary to support the Power Unit Department, • Provide technical support for Sales, Customer Service, and other functional areas as needed, • Support fab shop as needed., • Project management, • Follow established processes and procedures related to the entire hydraulic system process, • Work with other members of the Hydraulic Fabrication group in a team-oriented environment, • Be willing to contribute wherever necessary to help grow our company and other departments., • Provide estimating and design support for hydraulic power unit projects, • Work with Sales, Production, Engineering, and related personnel to produce drawings from sketches, archived drawings, customer drawings, company drawings, Government drawings, specifications, electronic images, etc., • Design parts based on written and verbal descriptions from Design Engineers, • Complete design projects utilizing AutoCAD, Autodesk Inventor 3D, and other design software, • Evaluate/compile the required product documentation before releasing a specific product, • Support our Sales Team in the field and work with customers as needed, • Modify, revise, and change designs, drawings, and related documents as needed, • Manage assigned jobs by performing required testing and debugging when necessary, • Work closely with all Production Personnel to ensure that design drawings convey accurate information, • Review assigned jobs to confirm that they meet ISO, quality assurance, and customer’s design requirements, • Attend and participate in meetings that focus on design reviews, • Calculate tolerance stack-ups to verify design fit-up, • Use established work instructions and drawing standards as guidelines, • Perform additional related assignments as needed Requirements • Degree or certification in Mechanical Technology, or trained as a Mechanical Designer/Drafter with related experience along with a High School diploma or GED. A combination of education and experience will be considered., • Proficient in the use of personal computers (MS Windows) and a variety of desktop software including Microsoft Office, AutoCAD, and Autodesk Inventor, electronic documentation systems, and scanners., • Strong and effective organization and time management skills, • It is essential that the individual be detail oriented and precise, • The individual must possess the ability to work under pressure with minimal supervision and adhere to project deadlines, • 5 or more years of experience reading and interpreting Engineering documents, • Excellent project management, written and verbal communication skills, • Comfortable working in a multi-tasking environment, • Medical/Dental/Vision/Disability effective first of the month after the hire date, • PTO accrual begins upon hire, • Referral bonuses, • 100% employee-owned plus 401k with company match

Job Description Job Title: Engineer (Mechanical/Electrical/Computer) Location: Philadelphia, PA Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is a premier provider of engineering and industrial services, proudly supporting the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other Department of Defense (DoD) organizations. We are committed to fostering a collaborative culture where every employee's voice is valued, and opportunities for growth and development abound. At Continental Tide, you'll thrive in a fast-paced, dynamic environment that encourages innovation, skill-building, and the pursuit of excellence. Join our team of dedicated experts who are passionate about delivering cutting-edge solutions to support our nation's fleet. We look forward to welcoming you aboard! Job Description: We are seeking a highly skilled Engineer with expertise in mechanical, electrical, or computer systems to support critical tasks for naval and maritime operations. This role involves conducting detailed technical reviews, project management, and engineering support to ensure the accuracy, functionality, and quality of ship systems and installations. Key Responsibilities: • Provide engineering support for Air Conditioning and Refrigeration (AC&R), Steam, Auxiliary, Combat Support, Life Support and Ventilation, and/or Compressed Air Systems., • Provide programmatic, engineering/technical support, test procedure development, testing, and onsite coordination support for programs, including Machine Alterations (MACHALTs), engineering change proposals. and/or ship change documents (SCDs)., • Provide market research, engineering support, and recommendations to resolve obsolescence issues., • Provide Ship system configuration, testing, training, support, troubleshooting, and assessments of HM&E systems., • Conduct pre- and post-installation ship checks to verify installation drawing accuracy., • Support Integrated Logistics Support (ILS) development, certification packages for MACHALTs, and/or SCDs., • Develop and track Plan of Action, and Milestones (POAMs) for related programs and projects., • Provide strategic planning and analysis of requirements to assist in developing a fully Integrated Master Schedule (IMS)., • Actively participate in the NSWCPD System Engineering Program (SEP), which includes attending meetings; completing action items; participating on sub teams, and participating in training, and assessments. Provide support for Systems Engineering Plan tools and processes., • Ensure proper equipment and logistic configurations for technical accuracy., • Perform Technical Assessment Team (TAT) reviews to ensure the delivery of quality products to the Fleet., • Develop and present fully automated advanced fluid system models using industry-standard software., • Analyze the impacts of potential ship alterations or modifications to existing shipboard systems. Requirements: • Bachelor's degree in any engineering discipline from an accredited college or university., • Seven (7) years of experience in: Navy Ship Auxiliary systems, including distributed machinery, • control systems and software; Auxiliary Fuel, and Lube Oil systems; Auxiliary Pumps, and Smart Valves; Auxiliary Machinery, and the testing of these systems., • Knowledge of NSWCPD System Engineering Program (SEP), Alterations (MACHALTs), engineering change proposals, and/or ship change documents (SCDs) processes., • Experience with Integrated Logistics Support (ILS) development and obsolescence management., • Proficiency in interpreting technical drawings and schematics., • Experience in project management, engineering support, and system configuration., • Knowledge and experience with naval ship systems including fuel and lube oil, pumps, heat exchangers, smart valves, auxiliary machinery and the testing of these systems., • Must have the ability to obtain a SECRET clearance. Why Join Us? At Continental Tide, we foster a culture of collaboration, innovation, and professional growth. By joining our team, you'll work on impactful projects supporting our nation's fleet, with opportunities to advance your career in a fast-paced and rewarding environment. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Benefits: Benefits: Learn more about us: See all of our latest opportunities at or follow us on our LinkedIn page at:. To be considered you must apply by going to . Continental Tide is an Equal Opportunity Employer – minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity. Continental Tide participates in E-Verify and U.S. citizenship is required for most positions. “This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans.”

Job Description POSITION SUMMARY: The Water/ Wastewater Senior Engineering Technician is a professional with a 2 to 5 years of experience with EIT certificate (preferred). This individual will plan, design and perform analysis on water/wastewater engineering projects such as water main; sanitary main; pumping stations; and water & wastewater treatment facilities. The Engineering Technician shall be self-motivated, with good writing skills and capable of working in a team environment. PRIMARY DUTIES: • Hydraulic calculations and layout of structures., • Work on a team to produce correspondence/reports/biddable documents for water distribution systems; wastewater conveyance system; treatment plants; potable wells; water storage tanks; and water & sanitary pumping stations., • Engineering support to our inspection department., • Capable of addressing multiple simultaneous assignments, on-time and within budgets., • "Proactive"' identification of problems/issues coupled with detailed analysis and effective resolution., • Work on a team to produce regulatory permitting applications. KNOWLEDGE, SKILLS and ABILITIES: • EIT preferred while working towards PE., • Ability to clarify and concisely express thoughts verbally and in written correspondence/reports/specifications., • Provides effort and takes pride in all work assignments produced., • Not afraid to ask for guidance/assistance in order to expedite the date of assignment deliverables., • Ability to simultaneously work on group and individual assignments., • Must have effective communication, management and writing skills., • Must be skilled in the use of Word/Excel products., • Bachelors of Science Degree in Civil, Mechanical, Structural, or Chemical Engineering curriculum from an accredited four-year college or university. CERTIFICATIONS/LICENSES REQUIRED • EIT or preparing to take and working towards PE. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of a Construction Observer, the employee typically works in the field and may be exposed to outside weather conditions. Computer/technology is required to document and report work performed. The position requires the ability to lift and carry up to 50 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $61,000 - $91,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Title: Process Engineer - Building Commissioning Location: King of Prussia, PA Duration: Permanent/Direct Hire Salary: $80,000 - $100,000/year Hours: 4 10's - Thursday-Sunday - First Shift Day to day: One of our large facility maintenance clients is seeking a Process Engineer - Building Commissioning to join their growing team onsite of a Biopharmaceutical client site. As a Process Building Engineer, you will be responsible for monitoring, maintaining and repairing building system operations and the performance of various areas including plumbing, electrical, painting, roofing, heating, and cooling. This job is part of the Engineering and Technical Services job function. They are responsible for providing support, preventive maintenance, and repairs on equipment and systems. What You’ll Do: • Perform maintenance and repairs to mechanical, plumbing, structural, furniture, fire, life safety, and control systems, ensuring all systems meet applicable standards., • Be present for system commissioning activities, primarily occurring on weekends, to represent our team and ensure accurate testing and functionality of equipment., • Technicians must be experienced enough to identify when systems are not operating as expected and ensure all access points are serviceable and maintainable., • Provide Lockout/Tagout (LOTO) support during commissioning and other critical operations., • Work schedule will be Wednesday through Sunday, with an alternative option of four 10-hour shifts from Thursday through Sunday., • Follow all applicable codes, regulations, governmental agency, and company directives related to building operations and work safety., • Maintain an energy management program to ensure all systems operate efficiently., • Assist with the implementation of a preventive maintenance program to extend the life of building machinery and systems., • Perform emergency repairs as needed and maintain a clean, safe workplace., • Review inspections of building systems including fire alarms, HVAC, and plumbing to ensure equipment operates within design capabilities., • Apply in-depth knowledge of standard principles and techniques to accomplish complex assignments and provide innovative solutions., • Coach others and share expertise across subject areas., • Lead by example, modeling behaviors consistent with CBRE RISE values, and work to build consensus across teams., • Impact a range of customer, operational, project, or service activities within your team and related teams., • Work within broad guidelines and policies and communicate difficult or sensitive information effectively. Must Haves: • Process Engineering Experience in a Pharma or GMP Environment, • Experience with Lock Outs and Tag Outs, • Utilities Experience Compensation: $80,000 - $100,000/year Exact compensation may vary based on several factors, including skills, experience, and education. Employees in this role will enjoy a comprehensive benefits package starting on day one of employment, including options for medical, dental, and vision insurance. Eligibility to enroll in the 401(k)-retirement plan begins after 90 days of employment. Additionally, employees in this role will have access to paid sick leave and other paid time off benefits as required under the applicable law of the worksite location.

Job Description Job Qualifications and skills A minimum of 5 years of verified experience as a Quality Control Manager working for General Contractors on NAVFAC or U.S. Army Corps of Engineers (ACOE) projects OR 10 years of verified foreman experience in one or more of following trades: Concrete, Mechanical, Electrical, Masonry, or Carpentry on commercial/industrial/military projects. Residential experience does not qualify. Knowledge and Skills Required by the Position Quality Assurance • Must successfully complete the “CQM for Contractors” course associated with the ACOE., • Provide overall coordination of the construction quality management program for assigned projects., • In conjunction with the Construction Manager (CM), review and provide recommendations toward approval of contractor quality control plan., • Attend selective quality control, preparatory and initial meetings, and monitor three-phase checklists for accuracy and thoroughness., • Provide relevant remarks on Government Quality Assurance (QA) reports (or in identified section of Contractor’s Quality Control (QC) reports), particularly on critical, definable features of work included., • Take/file/distribute progress photos. Validate quantity, condition, and approval of materials on site prior to Government issuing invoice payments., • Coordinate support to review and witness successful testing and commissioning/certification of critical systems (i.e., mechanical - HVAC/TABS/DALTS/DDC, electrical -Pad Mounted Transformers/High-Voltage Systems/Switchgear/Automatic Transfer Switches/Frequency Converters, fire and life safety/fire protection systems, roofing systems, and underwater structures). Assure quality workmanship in accordance with specifications and industry standards on concrete/masonry/stucco/building, envelope/structural steel/bolting/welding and other building materials/structural systems, as required., • Attend/witness selected tests and review all applicable test reports and results., • In conjunction with the CM, perform cursory review of Activity Hazard Analyses (AHAs) and ensure via the Site Safety and Health Officer (SSHO) that these are discussed by the construction contractor and their respective subcontractors prior to beginning each work activity or when a new work crew is to perform the work in accordance with the three phases of QC., • In conjunction with the CM, review and provide recommendations towards acceptance of Crane Critical Lift Plans, along with crane operation qualifications and certificate of compliance. Incumbent must be familiar with crane safety requirements and NAVFAC P-307 (Management of Weight Handling equipment). Observe critical lifts., • Ensure construction contractor is conducting monthly site safety self-evaluations and submitting the information with the pay vouchers/invoices; perform worksite safety assessments, as needed., • Take appropriate, timely action to ensure construction contractor compliance of safety and health requirements, including leading safety stand-downs, as required, and recommending dismissal of key construction contractor staff from the project due to non-performance or recurring violations., • Support extensive contact with key construction contractor representatives to promote an atmosphere of partnering and cooperation and to quickly resolve problems and maintain construction schedule., • Coordinating temporary utility and communication hook-ups for contractor, coordinating utility outages and road closures., • Coordinating lay-down area and storage areas, as required., • Coordinating excavation, hot work, burn and other construction-related permits, as required, subject to local restrictions., • Supports as a point of contact for Supported Command interface/coordination in the field., • Supporting collateral equipment installation and phone/data/communication connections., • Assisting with investigation of potential latent defects., • Assisting with coordination of the installation of cylinders/cores, keying system, and turnover of keys to owner/occupant and coordination of the facility system training for owner/occupants/PW shops personnel., • Reviewing pre-final contract drawings and specifications (particularly Division 01 administrative requirements) and technical RFPs, respectively. Perform on-site visits to review constructability and compatibility with actual field conditions. During design development and constructability review, provide technical knowledge of local conditions, including availability of construction materials and skilled labor. For problems found, make solution recommendations for designer consideration. Actively participate in partnering sessions, depending on the nature and scope of the construction contract. Facilitate effective relationships and processes between contractors, Supported Command, and government team members., • Support the review of all Government-approved technical and administrative submittals, including, but not limited to, the schedule of prices, contractor’s baseline critical path schedule, accident prevention plan, activity hazard analyses, safety and health plan, quality control plan, test plans/reports, performance verification tests of major systems, etc., • Investigating engineering problems that may arise on construction contracts, such as unforeseen conditions, contractor requests for information (RFIs), and dimension conflicts. Make recommendations for solutions to the NAVFAC CM., • Supporting preliminary scheduling meeting and review 3-week look ahead schedules (as applicable). Review updates of the baseline schedule with the CM to determine if contractor is ahead, on or behind. Review the critical activities to ensure the work on the construction contract remains focused on completion in the most reasonable time. As necessary (particularly when a contractor is falling behind schedule), participate in the bi-weekly look ahead meetings with the construction contractor to review project scheduling problems or concerns., • Reviewing and annotating, as required, contractor daily reports., • Assuring environmental compliance by contractor and coordinate EPA jobsite visits, when required., • Reviewing and verifying the accuracy of as-built drawings in support of invoice payments., • When applicable, coordinating with NAVFAC CM and issue non-compliance notice to contractor., • Arranging and coordinating pre-final and final acceptance inspections and tracking completion of punch list items., • Supporting the closeout process, including delivery of as-built drawings, warranties, Operations & Maintenance (O&M) manuals, and spare parts turnover. Education: • Complete the "CQM for Contractors" course associated with the ACOE. Benefits Excellent salary and benefits package to include paid time off, paid holidays, comprehensive health insurance plan including medical, dental, vision, life insurance, long-term disability insurance; 401(k) plan with employer match. EEO Statement Bristol companies are equal opportunity employers and offer any available positions to all, without regard to race, color, religion, sex, national origin, age, disability, veteran status, parenthood, pregnancy, marital status, or changes in marital status, in accordance with applicable state and federal laws. This applies to recruitment, placement, pay, benefits, training, employment status changes, social and recreational programs, and other conditions and benefits of employment. As an Alaska-Native-owned company, Bristol companies seek out and hire qualified Alaska Natives and other minorities. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

Job Description Bala Consulting Engineers is a 200-person engineering firm headquartered just outside of Philadelphia in Wayne, PA with full-service offices in New York, NY, Boston, MA, Baltimore, MD, and Washington, DC. We are seeking an ambitious individual to serve as a Commissioning Project Manager (CxPM) with expertise in mechanical / controls systems based out of our Wayne, PA office. This position will place a successful candidate into a team of industry leading commissioning/QA-QC mechanical systems testing engineers who lead the Commissioning process and provide technical oversight of the testing of mechanical equipment, controls and distribution systems. Project Management / oversight includes but is not limited to, mechanical system(s) upgrades in existing facilities, new mechanical systems testing (new construction) for fortune 500 companies throughout the U.S. Projects include data centers, trading floors, broadcast facilities, high rise infrastructure, healthcare, and high-end office HVAC systems. Scope includes ASHRAE Level-1 through Level-5 Commissioning, LEED Cx, Energy Code Cx, Retro Cx on mechanical infrastructure equipment, distribution and controls systems. It also includes predictive preventative maintenance program planning and execution, and systemic and component troubleshooting throughout the commissioning process. We will be selecting a candidate who thrives on challenges and constantly pushes the norm. This role requires the ability to develop clients and attract new business, manage internal teams, and execute multiple projects (of long and short duration) concurrently while developing and assisting in growing a group that is capable of executing the Cx process on projects on a regional and national basis. This person will also support sales and business development efforts by establishing, maintaining and cultivating client relationships. Suitable candidates need to possess knowledge and experience with industry standards and latest technologies in mechanical systems infrastructure. The ability to lead Cx projects and teams, communicate and work with clients, owner’s representatives, facility engineers and Bala’s multi-discipline staff and project teams are essential. The CxPM is viewed as a dynamic and entrepreneurial position that helps drive change, internally and externally, through the firm. The CxPM is responsible for not only their projects but helping those around them. At Bala, we believe in collaboration and actively share work and knowledge across all five of our offices. ROLES AND RESPONSIBILITIES: Manage Cx Projects • Serve as a project manager on select projects in the Cx Group. Project types include new builds, renovations, fit-outs and infrastructure upgrades, LEED Cx, Energy Code Cx and Retro Cx., • The CxPM role is client facing. The responsibilities include: reviewing RFP’s, attending pre-bid walkthroughs and writing proposals, test scripts, and reports. The role also includes planning of work, execution and day-to-day management of internal teams and clients., • The CxPM will provide all management functions including scope responsibilities, client management, scheduling, and financials., • Assist other CxPM’s across all locations of the enterprise., • Develop a core group of assistant project managers eventually capable of performing independently on similar project types., • As a CxPM based out of the Wayn, PA office, it is expected that the majority of time will be spent in the local area. Travel to other Bala offices is encouraged on an as-needed basis. National travel to project sites is expected and will occur infrequently on an as-needed basis based on the requirements of the project. This candidate must be willing to work various hours (days, nights, weekends etc.) to support project commissioning activities. Mentor Staff • Be a technical resource for the staff., • Manage/schedule quality control reviews to reinforce technical lessons and company processes., • Complete internal peer reviews and provide input in multi-discipline page turns, across all offices, to assist in the development of a comprehensive design., • Manage/schedule document reviews prior to all major project deliverables. Participate in Project Staffing Support • Review workforce projections and determine how it relates to staffing., • Identify times and strategies to manipulate design schedules to work with staffing., • Provide input on individual staff member performance, advancement, and potential., • Participate in staff performance reviews when appropriate., • Drive ownership, accountability and culture through the company., • Interact with partners and executives on a regular basis to further the growth and quality agenda of the firm. Marketing / Business Development Support • Identify potential business opportunities., • Work with the leadership team to develop fees on complex projects., • Develop and maintain client relationships., • Grow the volume and footprint of the office market sectors. Qualifications: At least eight (8) years’ experience in commissioning or adjacent field (construction, owner’s representative, etc.) • Bachelor’s degree in engineering or other relevant field, • PE/CEM/CBCP/BCxP preferred, • Experience managing projects and people, • Strong interpersonal and team building skills, • Strong technical writing skills, • Knowledge of building codes Bala is a dynamic growth-oriented company, built on relationships with our clients, staff, and industry partners. At Bala you will enjoy an exceptional employee experience that results in a successful career based on collaboration, leadership and personal development. As a multi-discipline engineering firm, Bala is a leader in innovative designs for building systems in High Rise, Mission Critical, Multi-Unit Housing, Commercial Office, Higher Education, Transportation, Adaptive Reuse and Life Science facilities. Bala offers comprehensive benefits: • Medical, Dental, and Vision insurance package, • 401(k) with employer match, • Employer Paid Life Insurance, • Up to (5) weeks of PTO based on years of experience and (8) paid holidays, • 8 hours of Volunteer Time Off, • Tuition and Licensure Reimbursement, • Federal Student Loan Assistance including match up to $5,250 per year, • Section 529 Plan (College Saving Plan), • Employee Referral Program Accepting resumes from candidates only. Agencies must obtain advance written approval from Bala Consulting Engineer’s HR/Recruiting Department to submit resumes. This approval must be in the form of a valid fully executed contract for service as well as a request to submit candidates to a specific job opening. Bala Consulting Engineers will not pay a fee to any Agency that does not have such an agreement in place, or for positions for which candidates have not been specifically requested. #LI-Onsite

Job DescriptionProcess Engineer – BLUSA Defense Manufacturing ???? Location: 11000 Midlantic Drive, Suite 100, Mount Laurel, NJ 08054 ???? Schedule: Full-Time | On-Site | Hours: 8:00 a.m. – 4:30 p.m. ???? Website: About BLUSA Defense Manufacturing BLUSA Defense Manufacturing is a trusted U.S.-based leader in precision machining, fabrication, welding, and assembly for critical defense applications. With decades of experience supporting the U.S. military and allied partners, we take pride in delivering high-quality, compliant, and mission-ready components that strengthen national security. Position Overview We are seeking a hands-on Process Engineer to join our growing team in Mount Laurel, NJ. In this role, you’ll evaluate, optimize, and standardize manufacturing processes across machining, fabrication, and assembly operations. This is an opportunity to make a measurable impact on product quality, production efficiency, and regulatory compliance in a fast-paced, defense-oriented environment. Key Responsibilities * Analyze and optimize manufacturing processes to improve quality, throughput, and cost-effectiveness. * Develop and implement process control plans, documentation, and best practices. * Support CNC programming and setup for machining and fabrication operations, including modeling, programming, and print production. * Identify root causes of production issues and implement corrective and preventive actions. * Create and maintain technical documentation such as work instructions, process flows, and PFMEAs. * Assist in equipment selection, process validation, and operator training for new or improved processes. * Ensure compliance with ISO 9001, AS9100, ITAR, and other applicable standards. Qualifications * Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering (or related field). * 3+ years of experience required in a manufacturing environment; 5+ years preferred, especially in defense or aerospace. * Strong knowledge of machining, fabrication, and assembly operations. * Familiarity with welding processes and standards (MIG, TIG, AWS, MIL-STD) is highly desirable. * Proficiency with CAD/CAM software such as SolidWorks, AutoCAD, or Mastercam. * Working knowledge of Lean Manufacturing and Six Sigma methodologies. * Excellent communication, documentation, and problem-solving skills. * U.S. citizenship required due to ITAR regulations. Why Join BLUSA Defense * Contribute to mission-critical projects that directly support U.S. and allied defense. * Collaborate with an experienced and passionate team of engineers and technicians. * Competitive compensation and comprehensive benefits package. * Career growth opportunities in a stable and expanding organization. Application Process Apply online at ???? Schedule: Full-Time | On-Site | Hours: 8:00 a.m. – 4:30 p.m. Shift schedule may be flexible.

Job Description POSITION SUMMARY: Established forward thinking Engineering firm located in Cherry Hill, NJ is seeking an engineer with 5+ years of relevant experience in HVAC/mechanical system design as well as plumbing and fire protection systems design for educational, commercial and industrial facilities to expand its Cherry Hill, NJ office. PRIMARY DUTIES: • Design of HVAC systems for commercial, industrial, and education facilities, • Hydronic system (chilled and hot water) piping design as well as ductwork and mechanical equipment sizing is also required., • Understands construction plan documentation including architectural, structural and MEP systems, • Knowledge of HVAC, Fire Protection, and Plumbing, • Preparation of construction documents including drawings, specifications, calculations, and details KNOWLEDGE, SKILLS and ABILITIES: • Candidates must possess excellent verbal and written communication skills, • Demonstrate the ability to take projects from inception to completion, • Detail Oriented, • Skilled in design and calculation software, AutoCAD competency a plus, • Ability to work independently with general instructions / guidance from project manager and produce the expected results. EDUCATION/EXPERIENCE: • BS in Mechanical engineering or equivalent degree/experience required CERTIFICATIONS/LICENSES REQUIRED • Professional Engineering licensure preferred. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description Holtec International, a turnkey supplier of technologies for the nuclear and sustainable energy industries, is seeking to add an experienced mechanical/civil/structural engineer/analyst to its Applied Mechanics Group with opportunities to contribute to Holtec’s first of a kind small modular reactor (SMR) design. Come join a growing multidisciplinary team of engineers designing the next generation nuclear power plant. The senior engineer would be called upon to analyze metallic, reinforced concrete and soil-subgrade supported structures. The analyses may support engineering and licensing requirements, leading to the licensing and construction of SMR-300 plants across the globe. The engineer will use and learn various methods and software to perform the analyses. SPECIFIC AREAS OF RESPONSIBILITY • Execute and document analyses for a variety of structures, systems and components (SSCs), • Review available concept designs based on an ambiguous set of requirements, then develop them into mature designs by critical thinking, literature research, interacting with members from other disciplines and vendors, and any analyses as permitted by project milestones, • Support the preparation of design deliverables, presentations, and communicate design progress in stakeholder meetings, • Static and dynamic finite element analyses (FEA) using ANSYS, • Drop and impact (e.g., missile and aircraft) analyses and target response using LS-DYNA, • Simulation of the seismic response of freestanding structures in air or submerged in water, • Static and dynamic analyses of large reinforced concrete or steel-concrete composite structures, • Soil-structure interaction (SSI) and fluid-structure interaction (FSI) analyses, • Applicant must possess a BS in Mechanical/Civil/Structural Engineering with a minimum of 6 years of experience. MS will count for 2 years of experience and Ph.D. will count for 4 years of experience (experience from MS and Ph.D. cannot be combined), • Familiarity with industry standards and design codes such as ASME, ASCE, ACI and AISC, • Must possess excellent credentials in principles of solid mechanics, • Industrial experience in the latest stress analysis codes such as ANSYS, LS-DYNA, and STAAD.Pro, • Prior nuclear industry experience including interactions with NRC or other regulatory authorities, • Experience in seismic and stress analysis of pressure vessels and rotating equipment, • Experience in modular design development of SSCs Powered by JazzHR CVzKisncZJ

Job Description Miller-Remick, a full-service MEP engineering firm, is looking for an energetic, self-motivated, and innovative individual for a Senior Electrical Engineer position. In addition to the basic qualifications listed, the successful candidate shall possess the skills required to successfully develop and execute project tasks and deliverables, be a collaborative team player, handle multiple complex tasks, establish and manage priorities, and have a strong drive to deliver a quality project for customers. Our clients include federal agencies (Dept. of Veteran Affairs, Dept. of Defense, GSA, Federal Bureau of Prisons, state, and local governments). Projects have varied degrees of complexity and a wide range of estimated construction costs and include hospitals and healthcare, military bases, federal buildings and courthouses, state and local government buildings, research laboratories, central steam and chilled water plants, corrections facilities and site utility infrastructure projects. Responsibilities: We are looking for a Senior Electrical Engineer for the planning and coordination of multi-discipline project teams. Candidate must be a quality-oriented individual to perform electrical engineering investigations/assessments of facilities, design building electrical systems, specification preparation, project and construction cost estimates, project scheduling for engineering projects. Qualifications: • Bachelor (BS) or Master (MS) in Engineering, • P.E. license with 8 years’ experience in electrical engineering, • Knowledge of all applicable Codes, • Experience with power, lighting, security, telecom systems, emergency generator design, • Building Information Modeling using REVIT, • Medium voltage experience is a plus, • Leadership qualities are a must Miller-Remick has a history of success leading project teams, encompassing a full array of sub-consultants, including architects and other design trades. We provide engineering, design and construction services as the Prime on highly complex projects for federal, state and local government clients. We have developed the expert personnel, management tools and service-oriented work ethic required to service clients in the following markets: healthcare, government, energy/power, institutional, and infrastructure.Miller-Remick is a Service-Disabled Veteran Owned Small Business that is fully staffed with Project Management and Engineering professionals specializing in Mechanical, Electrical, Structural, HVAC, Plumbing, Fire Protection, Piping, Process, and Controls. Our full-service team brings the experience necessary to deliver industry-leading solutions to our clients.\r\n \r\nMiller-Remick has a history of success leading project teams, encompassing a full array of sub-consultants, including architects and other design trades. We provide engineering, design and construction services as the Prime on highly complex projects for federal, state and local government clients. We have developed the expert personnel, management tools and service-oriented work ethic required to service clients in the following markets: healthcare, government, energy/power, institutional, and infrastructure.

Job Description Sigma Defense is currently seeking an Electro-Mechanical Equipment Assembler to join our team as an Electrical Engineering Technician I. The hired candidate will assist with building electronic assemblies/subassemblies and work with electrical or electronic components, such as modules, circuit boards, wiring harnesses, etc. This role involves following repetitive production standards, so we will consider any applicant with manual dexterity and electro-mechanical aptitude. Equal Opportunity Employer/Veterans/Disabled: Sigma Defense Systems is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Requirements • 5 - 8 years of experience working with electrical components and/or assemblies., • Strong experience with Microsoft Office components. Candidate must demonstrate computer competency to navigate websites and Excel spreadsheets, compose and send emails, and complete online training., • Must be able to interpret schematics and mechanical drawings to determine which steps to do and in the appropriate order., • Must be able to demonstrate proficiency with the following:, • Fine manipulation and use of hand tools including, but not limited to, wire strippers, crimpers, pliers, tweezers, screw drivers, wrenches, and power tools., • Use of the appropriate tools and equipment to produce crimps, pin terminals, eyelets, and lugs., • Candidate must possess or have the ability to obtain an active Secret security clearance., • Electrical Assembly of complex units where a high degree of problem-solving and extreme care, skilled workmanship, and accuracy are required., • Route wires, assembles, and installs electrical and electronic components in cabinets, electronics enclosures, and on machined plates to complete functionality of integrated components according to specifications., • Conducts functional and continuity tests of electrical assemblies, components, wire harness, and plugs, using ohmmeter, test lights, and other electrical testing instruments., • Tag or mark identifying information on parts., • Maintain a clean and safe workspace., • Assist in resolving production failures or product issues. Benefits • Dental and Vision Insurance, • Medical Insurance to Include HSA, FSA, and DFSA Plans, • Life and AD&D coverage, • Employee Assistance Program (EAP), • 401(k) Plan with Company Matching Contributions, • 160 Hours of Paid Time Off (PTO), • 12 (Floating) Holidays, • Educational Assistance, • Highly Competitive Salary

Job DescriptionDescription: Electromechanical Technician I & II Salary Ranges: • Tech I - $23.91 to $29.34 Electromechanical Technicians will be responsible for supporting the setup, maintenance, troubleshooting, and repair of electromechanical systems within our high-tech book manufacturing operations. These roles provide hands-on experience with advanced digital printing presses and binding equipment, ensuring optimal performance, reliability, and efficiency in a fast-paced book manufacturing environment. We have opportunities for candidates with different levels of experience and knowledge, with the minimum experience requirements for consideration listed below. Summary: DIY Media Group consists of some of the most respected brands in music, book, and video self-publishing and distribution. Our brands BookBaby and OnPress offer comprehensive book manufacturing and printing solutions. We utilize advanced digital printing technologies, including the Xeikon SX30000 and HP Indigo digital presses, and cutting-edge binding equipment from Muller, Kolbus, Digibook, and Meccanotecnica. Due to rapid growth, we're seeking Electromechanical Technicians to join our innovative manufacturing team and support the maintenance, optimization, and continuous improvement of our production equipment. Available Schedule: 2nd Shift (M-F, 2 PM-10 PM) Key Responsibilities: • Learn and perform routine and advanced maintenance and troubleshooting for digital printing presses (Xeikon SX30000, HP Indigo) and/or binding equipment (Muller, Kolbus, Mita, Meccanotecnica)., • Assist in the installation and calibration of new equipment to meet operational requirements., • Ensure compliance with safety and quality standards in all operations., • Work closely with the production team to provide technical support during shifts. Experience: 3 years of hands-on experience performing tasks related to the “Key Responsibilities” section listed below. Technical Skills preferred: • Understanding of electrical and mechanical systems., • Experience with PLCs, sensors, motors, and automated systems., • Knowledge of digital printing or binding equipment is a plus., • Electromechanical troubleshooting, • Electromechanical repair, • Production/ Departmental Service and Support, • Diagnostic tools and methodologies skill and development for both mechanical and electrical systems., • Must be able to understand, read, write, and orally communicate complex technical instructions in English. Must also be able to break down and explain complex technical matters in a manner understandable to all levels of the organization., • Proficiency with MS Office Suite or similar, • Knowledge of and ability to apply basic safety rules and practices (i.e., lock-out/tag-out)., • Strong problem-solving skills and attention to detail., • Effective communication and collaboration with multidisciplinary teams., • Meet attendance requirements, including working the hours and/or shift assigned, and beginning and ending work on time. Overtime may be required at times to meet shifts in business demand., • Assist in keeping equipment and work area clean and hazard-free., • Always wear proper PPE and garments while working in hazardous areas or as instructed by standard work procedures and equipment manuals., • Must maintain courteous, professional, and effective relationships with employees at all levels and work in a manner that is aligned with DIY’s company values., • Ability to lift and carry (short distances) up to 50 pounds., • Ability to perform work using tools in and around equipment from all angles, which includes, but is not limited to, standing, walking, sitting, bending, squatting, kneeling, twisting, climbing, reaching, grasping, etc., • Ability to see small details and defects of different colors with naked or corrected vision EEO Employer: Equal opportunity employer to all protected groups, including protected veterans and individuals with disabilities If you'd like more information about your EEO rights as an applicant under the law, please click here.

Job Description About Us: Amuneal is a leader in the design and manufacturing of Magnetic Shielding supported by our in-house precision sheet metal fabrication and annealing operation. We are dedicated to delivering high-quality, tight-tolerance parts in an ISO-9001 environment. We are committed to excellence in manufacturing and are looking for a seasoned professional to join our team as the Production Manager for Metal Fabrication. Position Overview: Our Production Manager for Metal Fabrication will be responsible for overseeing all aspects of our magnetic shielding production. This role requires a deep understanding of sheet metal fabrication, and experience in or the demonstrated ability to take on the responsibility for our annealing, and finishing areas,, Candidates need to possess strong leadership skills, and experience in lean manufacturing/manufacturing theory. The ideal candidate will contribute to enhancing operational efficiency and productivity through the organization of workflows, implementation of lean manufacturing practices, and the sourcing of capital equipment to expand capabilities and capacity. Key Responsibilities: • Lead and manage the metal fabrication operation, ensuring efficient and high-quality production processes., • Develop and implement lean manufacturing processes to improve operational efficiency, reduce waste, and enhance productivity., • Source and evaluate capital equipment purchases, making recommendations based on operational needs and budgetary considerations., • Collaborate with sales, engineering and quality to ensure manufacturability and the quality of fabricated products., • Oversee production planning, scheduling, and resource allocation to meet customer demands and deadlines., • Establish and monitor key performance indicators (KPIs) to drive continuous improvement in fabrication processes., • Foster a culture of safety, quality, and teamwork within the production department., • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field (or equivalent experience)., • Minimum of 5 years of experience in metal fabrication management, with a focus on precision sheet metal operations., • Proven experience in sourcing and evaluating capital equipment for metal fabrication., • Strong knowledge of lean manufacturing principles and practices., • Excellent leadership and team management skills, with a track record of developing high-performing teams., • Strong problem-solving abilities and a commitment to continuous improvement., • Competitive salary and performance-based bonuses, • Comprehensive health, dental, and vision insurance, • Retirement savings plan with company match, • Opportunities for professional development and growth

Job Description Holtec International seeks qualified applicants for the Valve Engineer position in its Systems Engineering department with the Company’s Corporate Engineering division located at the Company's KPS Technology Campus in Camden, NJ. This department is the company's center of excellence in the field of system engineering, supporting a number of Holtec subsidiaries including SMR, LLC, which is engaged in designing Holtec’s flagship small nuclear reactor. Pipe-Flo, HTRI, MathCad are amongst the most widely used codes in this department. Valve Engineers are engaged in the development of requirements and specifications for a variety of valves for various systems in nuclear power plants. If assigned to work in the SMR-300 program, the associate will support engineering and licensing requirements, leading to the licensing and construction of the first SMR-300 plant. Similar positions are also open at the Company’s positions are open in North Pittsburgh, PA, Covert, MI and Buchanan, NY locations. Minimum Qualifications: • BS in an engineering discipline., • In-depth knowledge of valve design, operation, maintenance, and testing considerations/procedures., • Experience in developing and/or reviewing valve procurement specifications for nuclear power plants., • Familiarity with valve maintenance impacts on power plant outages., • Familiarity with ASME BPVC, valve and actuator design standards, API, MSS, and nuclear quality assurance requirements (e.g., NQA-1)., • Knowledge of NRC regulations related to mechanical components in nuclear facilities., • Excellent technical writing, interpersonal and effective communication skills. Salary range: $98,000 - $128,000 Holtec International offers a competitive benefits package to eligible associates, which includes: • Medical, dental, and vision insurance, • 401(k) retirement plan with company match, • Paid time off and 11 Paid Holidays, • Company-paid life and AD&D insurance, • Employee Assistance Program, • Wellness resources and voluntary benefits Powered by JazzHR SKXF4dLQX2