Plant shop jobs in Des Moines, IowaCreate job alerts

Job Description Job Overview: Produce high-quality precast concrete panels that meet engineering specifications. Responsibilities and Duties: • Carry out the daily production plan as communicated by Right Hand Man, Foreman or Plant Manager, • Complete tasks related to panel production, • Clean and maintain production bed., • Install rebar and strand, • Pour and finishes concrete, • Strip out panels after completion, • Patch and repair panels as needed, • Maintain and improve housekeeping to ensure a safe and productive workplace on an hour by hour, day by day basis, • Complete daily preventive maintenance tasks as assigned, including tool maintenance, • Support development & execution of Standard Operating Procedures to ensure the most efficient use of labor and materials on the line, • Assist Foreman in the identification of variance to the daily plan, • Support cross-training of employees, • Produce & promote Quality at the Source, • Responsible for tools and machinery in your area, • Notify appropriate personnel of issues requiring maintenance work orders to be issued Areas of Accountability: • Learn & understand company safety policies and procedures and promote compliance., • Support the Objectives of being a Low-Cost Producer and High-Quality Provider., • Focus on increasing productivity and lowering material costs while maintaining expected levels of quality & communication with superiors., • Assist in the transformation of the shop floor culture to one of Continuous Improvement and Accountability., • Demonstrate reliability through exceptional attendance. Safety • Adhere to all safety rules and guidelines, • Identify, understand, & report safety hazards, poor behavior, and unsafe actions immediately, • Report ALL accidents to the Plant Manager immediately and completes an incident report, • Daily 5S compliance, • Review work areas w/Foreman, • Participate in safety program and training, • Understand & abide by company policies relative to safety training Quality • Focused on approaching zero quality variance, • If a quality error occurs, assist in determining the root cause and ensure that the root cause is eliminated to prevent a recurrence Qualifications: Education: Minimum High School Diploma or GED Knowledge and Skills: Experience in the Precast Industry and/or construction desired but not required Physical: Applicants must be able to walk and stand on feet for an extended period of time, lift, push and pull up to 75 lbs, crawl on hands and knees, climb a ladder and be able to work long hours. This position works outdoors year-round and is therefore subject to all weather conditions sometimes including extreme cold and heat. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Pay is: $24.20/hr. + OT Shift: Mon – Fri, Routes start at 5a. The Medical Waste Route Driver is responsible for servicing assigned accounts in the most professional way, ensuring that customers' needs are met on a continual basis for various waste pickup and supply delivery. This role will always provide the highest level of customer service possible. They may also transport waste from either a WMHS location or customer location, to a transfer location or processing location. All Company assigned vehicles are equipped with camera telematics which include inside and outside cameras. In addition, all vehicles are equipped with ELD (electronic logging device) and GPS (global positioning system). Essential Duties and Responsibilities • Manages assigned routes ensuring customers' waste is picked up in a safe, timely and accurate manner, • Pick up and transport waste safely according to all federal, provincial, and local rules and regulations, • Plans daily schedule based on customers' needs by reviewing daily paperwork, e.g., manifest, route sheets, previous VCR, etc. provided by the Transportation Manager/Supervisor or Dispatcher, • Follows routing software route schedule, • May prepare and load trucks to service select accounts for the day ensuring enough supplies are added. Required to unload trucks at various WMHS and customer sites; including ensure securing of waste, • Pick up specified waste from each customer site scheduled for the day. Ensures that customers have packaged and prepared the waste according to all federal, provincial, and local rules and regulations before transporting, • Provide the highest level of customer service to assigned accounts daily, communicating any issues to Transportation Manager/Supervisor or Dispatcher for resolution. This includes, but is not limited to re-routes, adjustments in container sizes, training, etc., • Ensures waste, supplies, and material handling equipment are secured prior to operating vehicle on public highway, • Ensures that assigned paperwork is completed legibly, neatly, accurately, and completely and returned to Transportation Supervisor or Dispatcher for processing. Ensures DOT Driver Log is completed, if applicable, • Communicates with WMHS Transportation Supervisor and/or Dispatcher regarding any change to route pickups, including address changes, customer not having waste ready for pickup, etc. Ensures that employee covering for specific route is aware of any situations outside the norm in order to provide the highest level of customer service. Reports any problems/issues with accounts to Transportation Supervisor and/or Dispatcher before the close of business each day, • Performs pre-trip and post-trip maintenance on assigned truck prior to leaving or closing for the day. Reports any maintenance problems to Transportation/Dispatcher for follow-up. Use of ELD (electronic logging device) and Geotab to log hours in accordance with DOT guidelines, if applicable, • Perform other duties and responsibilities, as assigned Qualifications A. Required Qualifications • 0- 1 years of experience, preferably in driving Box Trucks and route management, • May require mandatory immunizations and credentialing based on customer requirements, • Valid Driver's License, • All CMV drivers must be able to obtain a medical card by a certified medical examiner B. Preferred Qualifications • High School Diploma or GED (accredited) Physical Requirements • Standing, • Walking, • Lifting, • Pushing, • Pulling, • Crouching, • Reaching, • Handling, • Sitting, • Talking, • Hearing Field: This job operates in both inside garage, shop or gas plant conditions as well as in outside conditions that include inclement weather, heat and humidity. This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing—including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing—in accordance with government regulations and company policies. Benefits At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site.

Stericycle is now part of WM. To learn more about WM's acquisition of Stericycle, CLICK HERE (https://investors.wm.com/news-releases/news-release-details/wm-completes-acquisition-stericycle) to read the press release. Local Box Truck Driver Needed Pay is: $24.20/hr. + OT Shift: Mon - Fri, Routes start at 5a. I. Job Summary The Medical Waste Route Driver is responsible for servicing assigned accounts in the most professional way, ensuring that customers' needs are met on a continual basis for various waste pickup and supply delivery. This role will always provide the highest level of customer service possible. They may also transport waste from either a WMHS location or customer location, to a transfer location or processing location. All Company assigned vehicles are equipped with camera telematics which include inside and outside cameras. In addition, all vehicles are equipped with ELD (electronic logging device) and GPS (global positioning system). II. Essential Duties and Responsibilities + Manages assigned routes ensuring customers' waste is picked up in a safe, timely and accurate manner + Pick up and transport waste safely according to all federal, provincial, and local rules and regulations + Plans daily schedule based on customers' needs by reviewing daily paperwork, e.g., manifest, route sheets, previous VCR, etc. provided by the Transportation Manager/Supervisor or Dispatcher + Follows routing software route schedule + May prepare and load trucks to service select accounts for the day ensuring enough supplies are added. Required to unload trucks at various WMHS and customer sites; including ensure securing of waste + Pick up specified waste from each customer site scheduled for the day. Ensures that customers have packaged and prepared the waste according to all federal, provincial, and local rules and regulations before transporting + Provide the highest level of customer service to assigned accounts daily, communicating any issues to Transportation Manager/Supervisor or Dispatcher for resolution. This includes, but is not limited to re-routes, adjustments in container sizes, training, etc. + Ensures waste, supplies, and material handling equipment are secured prior to operating vehicle on public highway + Ensures that assigned paperwork is completed legibly, neatly, accurately, and completely and returned to Transportation Supervisor or Dispatcher for processing. Ensures DOT Driver Log is completed, if applicable + Communicates with WMHS Transportation Supervisor and/or Dispatcher regarding any change to route pickups, including address changes, customer not having waste ready for pickup, etc. Ensures that employee covering for specific route is aware of any situations outside the norm in order to provide the highest level of customer service. Reports any problems/issues with accounts to Transportation Supervisor and/or Dispatcher before the close of business each day + Performs pre-trip and post-trip maintenance on assigned truck prior to leaving or closing for the day. Reports any maintenance problems to Transportation/Dispatcher for follow-up. Use of ELD (electronic logging device) and Geotab to log hours in accordance with DOT guidelines, if applicable + Perform other duties and responsibilities, as assigned III. Qualifications A. Required Qualifications + 0- 1 years of experience, preferably in driving Box Trucks and route management + May require mandatory immunizations and credentialing based on customer requirements + Valid Driver's License + All CMV drivers must be able to obtain a medical card by a certified medical examiner B. Preferred Qualifications + High School Diploma or GED (accredited) IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. + Standing + Walking + Lifting + Pushing + Pulling + Crouching + Reaching + Handling + Sitting + Talking + Hearing ☒ Field: This job operates in both inside garage, shop or gas plant conditions as well as in outside conditions that include inclement weather, heat and humidity. This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing-including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing-in accordance with government regulations and company policies. V. Benefits At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply. Equal Opportunity Employer: Minority/Female/Disability/Veteran

The Driver Route Hybrid NonCDL is able to fill in as a commercial non-CDL driver, in the WMHS and Medical Waste business, as needed. This position covers routes when other team members are on vacation or sick, including those team members at remote transfer locations for both WMHS and Medical Waste. They are responsible for providing industry leading levels of service to our clients while taking care of all customer document destruction needs or medical waste removal. The integrity of every Route Driver is essential to maintaining goodwill and building new bonds of trust with our clients. The Route Driver is a member of the Operations team and plays an integral role as the face of WMHS and Medical Waste. The Route Driver maintains WMHS policies, standards, and practices and ensures adherence to WMHS' Vision, Mission and Values. Essential Duties and Responsibilities • Performs onsite/offsite document destruction of confidential information or pick up and transport medical waste, • Pick up and transport waste safely according to all federal, state, and local rules and regulations, • Plans daily schedule based on customers' needs by reviewing daily paperwork, e.g., manifest, route sheets, previous VCR, etc. provided by the Transportation Manager/Supervisor or Dispatcher, • May prepare and load trucks to service select accounts for the delay ensuring enough supplies are added, • Pick up specified waste from each customer site scheduled for the day. Ensures that customers have packaged and prepared the waste according to all federal, state, and local rules and regulations before transporting., • Provide the highest level of customer service to assigned accounts on a daily basis, communicating any issues to Transportation Manager/Supervisor or Dispatcher for resolution. This includes, but is not limited to re-routes, adjustments in container sizes, training, etc., • Performs pre-trip, post-trip checks, and driver check-in on assigned truck, prior to leaving or closing for the day. Reports any maintenance problems to Transportation/Dispatcher for follow-up, • Operates company equipment in a safe and efficient manner in an effort to minimize the risk of injury and equipment damage, • Complies with all local, state and federal laws governing driver fitness and hours of service. Ensures that assigned paperwork is completed legibly, neatly, accurately, and completely and returned to Transportation Supervisor or Dispatcher for processing. Ensures DOT Driver Log is completed, if applicable, • Maintains a high level of security when emptying consoles and/or collection totes by ensuring all documents are retrieved and the consoles/containers are securely locked. Services accounts using a hand-held device, ensuring console/containers are barcoded, locations are up to date, and the accuracy of type and quantity of consoles/containers, • Communicates with WMHS Transportation Supervisor and/or Dispatcher regarding any change to route pickups, including address changes, customer not having waste ready for pickup, etc. Ensures that employee covering for specific route is aware of any situations outside the norm in order to provide the highest level of customer service. Reports any problems/issues with accounts to Transportation Supervisor and/or Dispatcher before the close of business each day, • Manages assigned routes ensuring customers' material collected and serviced in a timely and accurate manner, • Handles and responds to all customer problems and inquiries expediently and in the best interest of both the customer and our business, • Performs pre-trip and post-trip maintenance on assigned truck prior to leaving or closing for the day. Reports any maintenance problems to Transportation/Dispatcher for follow-up, • Perform other duties and responsibilities, as assigned Qualifications • 3 years experience preferably in driving Shred Trucks and Box Trucks, • Must be 21 or older, • May require mandatory immunizations and credentialing based on customer requirements, • Valid Driver's License, • All CMV drivers must be able to obtain a medical card by a certified medical examiner, • High School Diploma or GED (accredited) Physical Requirements • Standing, • Walking, • Lifting, • Pushing, • Pulling, • Crouching, • Reaching, • Handling, • Sitting, • Talking, • Hearing Field: This job operates in both inside garage, shop or gas plant conditions as well as in outside conditions that include inclement weather, heat and humidity. This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing—including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing—in accordance with government regulations and company policies. Benefits At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site.

Stericycle is now part of WM. To learn more about WM's acquisition of Stericycle, CLICK HERE (https://investors.wm.com/news-releases/news-release-details/wm-completes-acquisition-stericycle) to read the press release. Pay Range: $24.95 Shift: Four 10-hour days What is the value of a WM Job? At WM we know that the value of a WM job is more than a paycheck. It's a way to create opportunities for you and your family. This is why we are constantly working to make WM a great place to work and grow a career. We Are Always Working For A Sustainable Tomorrow®: Our mission is to leave the world a better place than we found it by helping its inhabitants find purpose in becoming its caretakers. We Are People First: The members of the WM family are the foundation for our success. We foster an environment where all teammates feel welcomed, valued and seen. We Are Committed to Your Growth : Your Tomorrow Education Assistance Program, paid on-the-job training, and established career progression. We Are Stable: From the front line to the corporate offices, our team members perform essential and meaningful work. We Are a Family: At WM we are over 60,000 people - from many places and many backgrounds, and it is our amazing differences that make us stronger. We Are Investing in You: Amazing Medical, Dental & Vision, 401K with match, discounted stock options, dependent day care, and more! Ready to roll with us? Click Apply to join the WM team today. I. Job Summary The Driver Route Hybrid NonCDL is able to fill in as a Commercial non-CDL driver, in the WMHS and Medical Waste business, as needed. This position covers routes when other team members are on vacation or sick, including those team members at remote transfer locations for both WMHS and Medical Waste. They are responsible for providing industry leading levels of service to our clients while taking care of all customer document destruction needs or medical waste removal. The integrity of every Route Driver is essential to maintaining goodwill and building new bonds of trust with our clients. The Route Driver is a member of the Operations team and plays an integral role as the face of WMHS and Medical Waste. The Route Driver maintains WMHS policies, standards, and practices and ensures adherence to WMHS' Vision, Mission and Values. II. Essential Duties and Responsibilities + Performs onsite/offsite document destruction of confidential information or pick up and transport medical waste + Pick up and transport waste safely according to all federal, state, and local rules and regulations + Plans daily schedule based on customers' needs by reviewing daily paperwork, e.g., manifest, route sheets, previous VCR, etc. provided by the Transportation Manager/Supervisor or Dispatcher + May prepare and load trucks to service select accounts for the delay ensuring enough supplies are added + Pick up specified waste from each customer site scheduled for the day. Ensures that customers have packaged and prepared the waste according to all federal, state, and local rules and regulations before transporting. + Provide the highest level of customer service to assigned accounts on a daily basis, communicating any issues to Transportation Manager/Supervisor or Dispatcher for resolution. This includes, but is not limited to re-routes, adjustments in container sizes, training, etc. + Performs pre-trip, post-trip checks, and driver check-in on assigned truck, prior to leaving or closing for the day. Reports any maintenance problems to Transportation/Dispatcher for follow-up + Operates company equipment in a safe and efficient manner in an effort to minimize the risk of injury and equipment damage + Complies with all local, state and federal laws governing driver fitness and hours of service. Ensures that assigned paperwork is completed legibly, neatly, accurately, and completely and returned to Transportation Supervisor or Dispatcher for processing. Ensures DOT Driver Log is completed, if applicable + Maintains a high level of security when emptying consoles and/or collection totes by ensuring all documents are retrieved and the consoles/containers are securely locked. Services accounts using a hand-held device, ensuring console/containers are barcoded, locations are up to date, and the accuracy of type and quantity of consoles/containers + Communicates with WMHS Transportation Supervisor and/or Dispatcher regarding any change to route pickups, including address changes, customer not having waste ready for pickup, etc. Ensures that employee covering for specific route is aware of any situations outside the norm in order to provide the highest level of customer service. Reports any problems/issues with accounts to Transportation Supervisor and/or Dispatcher before the close of business each day + Manages assigned routes ensuring customers' material collected and serviced in a timely and accurate manner + Handles and responds to all customer problems and inquiries expediently and in the best interest of both the customer and our business + Performs pre-trip and post-trip maintenance on assigned truck prior to leaving or closing for the day. Reports any maintenance problems to Transportation/Dispatcher for follow-up + Perform other duties and responsibilities, as assigned III. Qualifications A. Required Qualifications + 3 years experience preferably in driving Shred Trucks and Box Trucks + Must be 21 or older + May require mandatory immunizations and credentialing based on customer requirements + Valid Driver's License + All CMV drivers must be able to obtain a medical card by a certified medical examiner B. Preferred Qualifications + High School Diploma or GED (accredited) IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. + Standing + Walking + Lifting + Pushing + Pulling + Crouching + Reaching + Handling + Sitting + Talking + Hearing ☒ Field: This job operates in both inside garage, shop or gas plant conditions as well as in outside conditions that include inclement weather, heat and humidity. This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing-including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing-in accordance with government regulations and company policies. V. Benefits At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply. Equal Opportunity Employer: Minority/Female/Disability/Veteran

Job Description Company Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Olsson provides construction management, administration, and observation services for various types of projects to assure that work is performed in conformance with project documents. Our construction services include daily observation / inspection, project documentation, submittal review, design support, shop drawing review, payment application review, payroll review, and oversight for materials testing. We provide technically qualified personnel for our clients' specific project requirements. We are seeking a Mechanical Construction Manager to support and coordinate mechanical construction activities for a confidential industrial client in Kansas City, Missouri. This is an embedded, client-side role, working onsite as part of a larger construction management team. The ideal candidate will possess a foundational background in mechanical systems and experience supporting or managing construction activities within an industrial environment. This position may require up to 100% travel for candidates who are not local to the Kansas City metropolitan area. Key responsibilities: • Coordinate and manage assigned mechanical construction activities within the plant under the guidance of senior construction leadership., • Support construction execution by overseeing contractor activities related to mechanical scopes, ensuring work aligns with project plans, schedules, and quality expectations., • Oversee the installation, maintenance, and repair of mechanical systems within the facility, coordinating with electrical and other discipline leads as needed., • Collaborate with project stakeholders to maintain alignment with project objectives, specifications, and safety requirements., • Assist in the development and execution of construction schedules related to plant shutdowns and individual product line downtimes., • Monitor project progress for assigned scopes, identify potential issues or risks, and escalate concerns as appropriate., • Support compliance with all site safety regulations, company policies, and industry standards., • Assist with project documentation and prepare status updates for project leadership and client stakeholders., • Contribute to a culture of collaboration, continuous improvement, and operational excellence. This position includes: • Applicable PPE (personal protective equipment) provided., • Work boot reimbursement program., • Company issued laptop., • Cell phone reimbursement options. Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Using your talents to positively affect communities. You bring to the team: • Strong communication skills., • Ability to contribute and work well on a team., • Bachelor's degree in Mechanical Engineering, Construction Management, or a related field., • Five (5) years or more years of experience in mechanical construction, mechanical systems oversight, or industrial capital projects., • Ability to work in a constant state of alertness and in a safe manner., • Valid driver's license with a clean driving history., • Willingness to work a flexible schedule. #LI-IC1 Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities, • Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job Description Senior Mechanical Engineer – MEP Consulting Locations: Ames / Des Moines, Iowa or Omaha, Nebraska Job Type: Full-Time Company: Resource Consulting Engineers, LLC About the Opportunity Resource Consulting Engineers (RCE) is seeking an experienced Senior Mechanical Engineer to join its growing MEP consulting team in the Ames/Des Moines, Iowa or Omaha, Nebraska area. This is a hands-on engineering and project leadership role for a mechanical engineer with significant experience designing building systems within an MEP consulting engineering and/or A/E design firm. The Senior Mechanical Engineer will lead mechanical design efforts, work directly with clients and architects, coordinate with multidisciplinary project teams, and support projects within the education, government, healthcare, and institutional markets. Responsibilities • Lead mechanical/HVAC design for commercial and institutional building projects., • Design HVAC, heating, cooling, ventilation, and related mechanical building systems., • Perform heating and cooling load calculations, equipment sizing, and system selection., • Develop mechanical construction documents and specifications using Autodesk Revit., • Lead projects from conceptual design through construction administration., • Evaluate existing mechanical systems for renovations, additions, and facility upgrades., • Coordinate mechanical designs with electrical, architectural, structural, and other disciplines., • Work directly with architects, owners, contractors, and other project stakeholders., • Review contractor submittals and shop drawings., • Respond to RFIs and provide engineering support throughout construction., • Participate in site visits, field observations, and existing-condition assessments., • Manage project schedules, deliverables, and client expectations., • Provide technical guidance and mentorship to junior engineers and designers., • Contribute to the continued growth of RCE's mechanical engineering practice. Required Qualifications Candidates should meet all of the following requirements: • 5+ years of professional mechanical engineering experience., • 5+ years of experience working for an MEP consulting engineering firm and/or A/E design firm., • Demonstrated experience designing mechanical/MEP systems for commercial or institutional buildings., • Project experience within education, government, and/or healthcare markets., • Extensive hands-on experience using Autodesk Revit for building systems design and construction documents., • Strong experience with HVAC and mechanical building systems design., • Experience performing load calculations, equipment selection, and system sizing., • Knowledge of applicable mechanical, energy, and building codes., • Ability to coordinate effectively with architects, engineers, contractors, and clients., • Strong written and verbal communication skills., • Ability to work on-site from the Ames/Des Moines, IA or Omaha, NE area. Preferred Qualifications • Professional Engineer (PE) license in Iowa or Nebraska, or ability to obtain appropriate licensure through reciprocity., • Experience leading mechanical design projects from concept through construction., • K-12, higher education, healthcare, municipal, or government facility experience., • Experience with central plant, hydronic, geothermal, or other complex HVAC systems., • Experience with renovation, addition, and new-construction projects., • Knowledge of energy-efficient and sustainable building design., • Client-facing project management experience., • Experience mentoring junior engineers and designers. Ideal Candidate The ideal candidate has built their career within an MEP consulting or architecture/engineering firm, designing mechanical systems for commercial and institutional buildings. They have significant hands-on Revit experience and a strong background in HVAC and building mechanical systems. They are comfortable taking ownership of projects, coordinating directly with architects and clients, and supporting projects throughout design and construction. Candidates whose experience is primarily in manufacturing, product design, automotive, industrial equipment, or other non-building mechanical engineering disciplines will generally not align with this position. About Resource Consulting Engineers Resource Consulting Engineers, LLC is a mechanical, electrical, and plumbing consulting engineering firm providing building analysis, design, and construction administration services. RCE works on projects that directly serve communities throughout Iowa and Nebraska, including K-12 schools, higher education facilities, government buildings, healthcare environments, and other institutional facilities. The firm offers experienced engineers the opportunity to take meaningful ownership of projects, work directly with clients, mentor developing engineers, and contribute to the continued growth and leadership of the organization.

Job DescriptionDescription: Let’s Do great things—Together At Shive-Hattery, we believe great design starts with great people. We’re a full-service architecture and engineering firm with a legacy of collaboration, innovation, and putting people first, our clients and each other. If you’re looking for a place where your ideas matter and your growth is supported, you’ll feel at home here. Why This Role Matters As a Structural Engineer- Bridge with 4+ years of experience you’ll play a key role in supporting the firm and shaping projects that make a difference—from concept through completion. You’ll collaborate with talented teammates, contribute your expertise, and help us deliver thoughtful, high-quality solutions for those we serve. What You’ll Do • Design projects as a structural engineer for transportation projects of various sizes. Work with experienced engineers and technicians while coordinating work within multi-discipline teams. The majority of efforts will focus on our long-standing public infrastructure clients who we work with locally and nationally, • Additional responsibilities include overseeing shop drawing reviews, • Leading innovative bridge and civil structures projects, • Work closely with clients and have the opportunity to contribute to a variety of projects, including: Bridge and box culvert design, lake and dam spillways, retaining walls and tunnels, park structures, water and wastewater treatment plant concrete tanks, and riverfront developmentsRequirements: You don’t need to check every box to succeed here. If your experience aligns with many of the items below and you’re excited about the work we do, we encourage you to apply. • Must be capable of working on multiple projects simultaneously, • Must be able to drive and have access to an automobile, climb ladders and work off of elevated platforms and open grating, and wear personal protective equipment required for specific clients and sites, • Education: Bachelor’s degree in Civil Engineering, Structural Engineering or a related field, • Experience: 4+ years in Structural Engineering, • License/Certification: Professional Engineer license in Iowa or the ability to obtain license within 12 months What will make you stand out • Experience with Iowa DOT projects is a plus, • Experience leading project teams and interfacing with clients, • Experience with OpenBridge Modeler, OpenRoads Designer, Microstation and other bridge design software is a an advantage Our Commitment to You Great work happens when you feel secure in your future, confident in your support, and trusted to grow. That’s why our benefits support your health, financial stability, and life beyond work — including medical, dental and vision coverage, paid time off and holidays, 401(k) retirement savings, disability protection, wellness incentives, and flexibility. When we succeed, you share in that success. Guided by truth, trust, mentoring, and care, we’re committed to helping you build a lasting career. Who We Are Shive-Hattery is a privately held architecture and engineering consulting firm with design offices across the United States. Here, you’ll work alongside multidisciplinary teams delivering integrated design solutions for clients across industries. You’ll contribute to meaningful projects guided by our principle to design what matters and make our world a better place. You’re looking to build something great. So are we. Shive-Hattery is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. This position is primarily performed in an office or hybrid environment and may require travel to project sites, other Shive-Hattery office locations or to meet with clients. A full clean driver’s license is required. The role involves sitting, standing, and working at a computer for extended periods. May also require lifting light to medium weight objects of up to 50 lbs., the wearing of PPE and navigating active construction sites. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this role. U.S. Citizen, U.S. Person, or Immigration Status Requirements: We are unable to provide visa sponsorship now or in the future. Candidates must have current and ongoing authorization to work in the United States without employer sponsorship. If this role sounds like a fit for your skills and interests, we’d love to hear from you. Apply today and help us design what matters to make the world a better place. Interested applicants should submit their cover letter, resume, and portfolio for consideration. If you are unable to submit your portfolio due to size constraints, please include a link to your portfolio in your cover letter. Notice to Recruiters and Staffing Agencies: To protect the interests of all parties, Shive-Hattery and its partners will not accept unsolicited candidate submissions from a recruiter or staffing agency who is not operating under an executed recruiting or staffing services contract with Shive-Hattery. Please do not contact our employees directly in that regard or otherwise submit unsolicited candidate information in any form.

Job Description PURPOSE The Mechanical Designer will specialize in project design documentation for the design build industry, with a focus on the food and beverage, refinery, research laboratories, agricultural, power, and other industrial markets. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. • Work with engineers to produce clear, complete, detailed and accurate construction documents, utilizing CAD software, • Develop design drawings for engineering, shop fabrication and field installation of industrial systems, • Produce general arrangement drawings for review by project team and customers and to be included in construction documents., • Create preliminary 3D models using AutoCAD to show equipment, piping, and specialties for review by customers and use by detailers, • Develop 3D objects from cutsheets and submittals in AutoCAD as required for project design needs, • Stay updated with new technologies that innovate and improve CAD skills and processes by attending continuing education opportunities, • Coordinate with designers of other trades/business units MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Minimum of five (5) years related experience, • Two-year Associate’s degree in CAD design preferred, • Industrial experience is preferred, • Design/Build project experience preferred, • Experienced with design of hydronic, process piping, and industrial process systems, • Proficient with AutoCAD and Navisworks, • Familiarity with process flow diagrams, Process and Instrumentation Drawing (P&IDs), General Arrangement Drawings, and 3D BIM modeling, • Experience with or ability to learn AutoCAD MEP, Plant 3D, Smart PID preferred MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Passion for Design/Construction, • Ability to work collaboratively with clients and Team Members at all levels of the company, • Excellent verbal and written communication skills, • High level of concentration to mentally work through issues, • Ability to meet project deadlines, • Proven problem-solving ability ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk working on a computer, • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature and weather conditions, • Position may require travel Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

WHO WE ARE: Accenture is a leading solutions and services company that helps the world’s leading enterprises reinvent by building their digital core and unleashing the power of AI to create value at speed across the enterprise, bringing together the talent of our approximately 786,000 people, our proprietary assets and platforms, and deep ecosystem relationships. Our strategy is to be the reinvention partner of choice for our clients and to be the most client-focused, AI-enabled, great place to work in the world. Through our Reinvention Services we bring together our capabilities across strategy, consulting, technology, operations, Song and Industry X with our deep industry expertise to create and deliver solutions and services for our clients. Our purpose is to deliver on the promise of technology and human ingenuity, and we measure our success by the 360 value we create for all our stakeholders. Visit us at accenture.com. THE PRACTICE: This role will align to Industry X’s Manufacturing & Operations practice. Manufacturing & Operations professionals help our clients achieve their ambitions for digital transformation within their core manufacturing and operations throughout the full lifecycle of their assets. With domain expertise across consulting and technology they unlock new sources of opex and capex efficiency and effectiveness. Manufacturing Consultants define and design the future state of Manufacturing companies (within the 4 walls optimization). This includes organizational, operational, and technical models to enable modernization of core operations across the breadth and depth of EHS, Operations, Maintenance, Quality, Operational/ Manufacturing Excellence functions. Professionals digitize plants, sites and centers by bringing cross-facility operations at scale. Our next generation production and manufacturing methods leverage AI, IoT, automation, wearables, and predictive analytics to enable multi-site plant optimization; to increase production reliability, product quality, worker safety and sustainable operations with a more productive digital workforce. THE WORK: Support delivery of Industrial and Automotive reinvention, with a focus on realizing complex large scale manufacturing engineering initiatives. This includes transformation of large brownfield plants, design of greenfield plants and preparing for new product launches. Apply a strong understanding of manufacturing and supply chain value levers specific to the industrial and automotive environments. This includes the implementation of new digital, AI and physical automation technologies. The automation and transformation of material flow inside industrial and automotive plants is of specific importance for this role. Manage projects or workstreams endtoend, including scope, planning, risks, dependencies, and delivery outcomes, while adapting to evolving client priorities. Build and apply industry, functional, and technical knowledge to support client conversations, solution development, and delivery of innovative manufacturingled ways of working. Lead and coordinate diverse, global Accenture teams, providing daytoday direction, coaching, and quality oversight, while leveraging AI and digital tools to improve delivery effectiveness. Establish and maintain strong client relationships at the manager, director, and senior director levels through clear communication, structured problem solving, and delivery credibility. Collaborate across Accenture Supply Chain & Engineering team to deliver integrated, endtoend solutions spanning manufacturing operations, platforms, and supply chain. Contribute to manufacturingfocused thought leadership, including clientready materials, points of view, and case examples related to manufacturing transformation, lifecycle integration, and product launch readiness. Develop and maintain awareness of the Industrial and Automotive ecosystem, including key platforms, vendors, and emerging capabilities relevant to operations and execution. Support the evolution of Accenture’s Manufacturing reinvention offerings, with opportunities to grow into broader capability, account, or portfolio leadership roles over time. The work could include any of the following processes: Accenture’s point of view amongst clients and other key stakeholders Business process reengineering Lean six sigma transformation Manufacturing & Ops Excellence Asset reliability & performance management Process reliability TPM & TQM Production planning and scheduling Quality management Production operations Inventory & Material handling Workflow automation Reporting & Dashboarding Advance Automation Process Design & Simulation Travel may be required for this role. The amount of travel will vary from 0 to 100% depending on business need and client requirements. HERE’S WHAT YOU’LL NEED: Minimum of 3 years experience as part of a team focused on manufacturing engineering and material flow in automotive and industrial manufacturing Demonstrated exposure to material flow and manufacturing engineering in automotive/industrial manufacturing plants. Experience with some of the workstreams involved for example: designing material delivery routes, performing 2D/3D simulations, IT/OT integration considerations, PFEP, business case considerations when deploying automated mobile robots (AMRs). Understanding of key vendors, risks, technologies in this space is of critical importance. BONUS POINTS IF YOU HAVE: Experience with shop floor change management, performance improvement, business case and value management Understanding of related ERP modules Understanding of Plant Control Systems (DCS, PLC, SCADA, HMI, etc.) Experience with simulation in factory environments Bachelor's degree or equivalent (minimum 4 years' work experience). Industrial or engineering degree is preferred Compensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired as set forth below.We anticipate this job posting will be posted until 09/27/2026.Accenture offers a market competitive suite of benefits including medical, dental, vision, life, and long-term disability coverage, a 401(k) plan, bonus opportunities, paid holidays, and paid time off. See more information on our benefits here:U.S. Employee Benefits | AccentureRole Location Annual Salary RangeCalifornia $70,350 to $205,800Cleveland $59,100 to $164,600Colorado $63,800 to $177,800District of Columbia $68,000 to $189,300Illinois $59,100 to $177,800Maine $54,400 to $151,400Maryland $63,800 to $177,800Massachusetts $63,800 to $189,300Minnesota $63,800 to $177,800New York $66,300 to $205,800New Jersey $68,000 to $205,800Virginia $59,100 to $189,300Washington $80,200 to $189,300About AccentureAccenture is a leading global professional services company that helps the world’s leading businesses, governments and other organizations build their digital core, optimize their operations, accelerate revenue growth and enhance citizen services—creating tangible value at speed and scale. We are a talent- and innovation-led company with approximately 791,000 people serving clients in more than 120 countries. Technology is at the core of change today, and we are one of the world’s leaders in helping drive that change, with strong ecosystem relationships. We combine our strength in technology and leadership in cloud, data and AI with unmatched industry experience, functional expertise and global delivery capability. Our broad range of services, solutions and assets across Strategy & Consulting, Technology, Operations, Industry X and Song, together with our culture of shared success and commitment to creating 360 value, enable us to help our clients reinvent and build trusted, lasting relationships. We measure our success by the 360 value we create for our clients, each other, our shareholders, partners and communities.Visit us at What We BelieveWe have an unwavering commitment to diversity with the aim that every one of our people has a full sense of belonging within our organization. As a business imperative, every person at Accenture has the responsibility to create and sustain an inclusive environment.Inclusion and diversity are fundamental to our culture and core values. Our rich diversity makes us more innovative and more creative, which helps us better serve our clients and our communities. Read more hereRequesting An AccommodationAccenture is committed to providing equal employment opportunities for persons with disabilities or religious observances, including reasonable accommodation when needed. If you are hired by Accenture and require accommodation to perform the essential functions of your role, you will be asked to participate in our reasonable accommodation process. Accommodations made to facilitate the recruiting process are not a guarantee of future or continued accommodations once hired.If you would like to be considered for employment opportunities with Accenture and have accommodation needs such as for a disability or religious observance, please call us toll free at 1 (877) 889-9009 or send us an email or speak with your recruiter.Equal Employment Opportunity StatementWe believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, military veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by applicable law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities.For details, view a copy of the Accenture Equal Opportunity StatementAccenture is an EEO and Affirmative Action Employer of Veterans/Individuals with Disabilities.Accenture is committed to providing veteran employment opportunities to our service men and women.Other Employment StatementsApplicants for employment in the US must have work authorization that does not now or in the future require sponsorship of a visa for employment authorization in the United States.Candidates who are currently employed by a client of Accenture or an affiliated Accenture business may not be eligible for consideration.Job candidates will not be obligated to disclose sealed or expunged records of conviction or arrest as part of the hiring process. Further, at Accenture a criminal conviction history is not an absolute bar to employment. The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. Additionally, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Company's legal duty to furnish information.California requires additional notifications for applicants and employees. If you are a California resident, live in or plan to work from Los Angeles County upon being hired for this position, please click here for additional important information.Please read Accenture’s Recruiting and Hiring Statement for more information on how we process your data during the Recruiting and Hiring process.SummaryLocation: Atlanta, 75 Fifth, Corp; Milwaukee, 790 N Milwaukee St, Corp; Akron, 12 East Exchange Street, IX; Dallas, 5205 N OConnor Las Colinas, Corp; Columbus, 400 W. Nationwide Blvd, Corp; Kirkland, 416 6th Street South, Corp; Cincinnati, 4th Street, Corp; New York, One Manhattan West, Corp; Austin, 323 Congress Avenue, Corp; Albany, 69 State St, Corp; Chicago, Accenture Tower, Corp; St. Pete, 140 Fountain Pkwy, Tampa Corp; Hartford, 280 Trumbull, Corp; Pittsburgh, 1001 Liberty Ave, Corp; St. Louis, 4220 Duncan Avenue, Corp; Miami, 777 Brickell Ave, Corp; Raleigh, 555 Fayetteville, Corp; Minneapolis, 333 S 7th, Corp; Mountain View, 650 Castro, Corp; Morristown, 1 Speedwell Ave, Corp; Denver, 999 18th St, Corp; Boston, 888 Boylston, Corp; Philadelphia, 2001 Market St, Corp; Des Moines, 909 Locust, Corp; Overland Park, 7300 W 110th Street, Corp; Los Angeles, 6181 W Centinela Ave, Corp; Charlotte, 1120 S Tryon St., Corp; Carmel, 11939 N Meridian St., Corp; Houston, 1301 Fannin, Corp; Arlington, 1201 Wilson, Corp; Bentonville, 805 S Walton Blvd., Corp; Nashville, 4101 Charlotte Ave., Corp; Detroit, 1240 Woodward, CorpType: Full time

Accenture helps the world’s leading enterprises reinvent by building their digital core and unleashing the power of AI to create value at speed for organizations across industries. Our strategy is to be the reinvention partner of choice for our clients and lead in the safe, widespread adoption of AI, and to be the most client-focused, AI-enabled, great place to work in the world. We bring together the talent of our approximately 799,000 people with proprietary assets and platforms, deep process and industry expertise, and leading ecosystem relationships to deliver end-to-end solutions and measurable outcomes at scale. Through our Reinvention Services, we offer broad expertise across Cybersecurity, Digital Core, Finance, Industry and Enterprise, Song, Supply Chain and Engineering, and Talent, with advanced capabilities in AI and Data, Industry and Process, and Technology. We serve approximately 9,000 clients and generated approximately $70 billion in FY25 revenue. Visit us at accenture.com.WHO WE AREWe are Accenture’s Supply Chain and Engineering reinvention partner for Life Sciences. We embed innovation, intelligence, and AI-native operations into the way the world designs, engineers, manufactures, and distributes products. We serve Life Sciences clients across the value chain to help bring lifesaving medicines and products to patients through harnessing the power of advanced technologies.The Work:Accenture is seeking a Consultant to drive project execution in Digital CMC and PLM transformation work within our Supply Chain & Engineering practice for Life Sciences. We work with our pharmaceutical, biotech, medical technology, distributor and consumer health clients globally to redefine the future of the life sciences industry: combining the latest technology with scientific breakthroughs to revolutionize how medical treatments are discovered, developed and delivered to patients around the world. This role drives the enablement of digital thread and data backbone concepts at our clients to build foundational building blocks for AI and agentic operations.Key Responsibilities:At a Consultant level, key responsibilities could include:Support project delivery of business and technology transformations by utilizing deep industry expertise in PLM, CMC, tech transfer, data as a product, knowledge graphs, data lineage, and AI-enabled business and technology transformation work Understand business value levers for PLM and CMC reinvention across pharmaceuticals, biotech, MedTech and beyond including upstream R&D and downstream commercialization Build and apply technical, industry, organization, and functional knowledge to support efforts in selling opportunities to existing and new clients Engage deeply in project delivery with hands-on work executing against program priorities, leading work products, and coaching and mentoring othersBring effective communications to manage both internal and external relationships and deliver with excellence Support practice and people development across PLM, digital CMC, product development, product launch and data management in addition to day to day project delivery excellenceTravel Requirements:Travel is required for this role and could vary from 0-75%.HERE’S WHAT YOU’LL NEED: Minimum of 3 years experience as part of a team focused consulting or industry in life sciences supply chain and manufacturing space in digital CMC and PLM Demonstrated exposure to material flow and manufacturing engineering in automotive/industrial manufacturing plants. Experience with some of the workstreams involved for example: designing material delivery routes, performing 2D/3D simulations, IT/OT integration considerations, PFEP, business case considerations when deploying automated mobile robots (AMRs). Understanding of key vendors, risks, technologies in this space is of critical importance. BONUS POINTS IF YOU HAVE: Experience with shop floor change management, performance improvement, business case and value management Understanding of related ERP modules Understanding of Plant Control Systems (DCS, PLC, SCADA, HMI, etc.) Experience with simulation in factory environments Bachelor's degree or equivalent (minimum 4 years' work experience). Industrial or engineering degree is preferred Compensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired as set forth below.We anticipate this job posting will be posted until 07/26/2026.Accenture offers a market competitive suite of benefits including medical, dental, vision, life, and long-term disability coverage, a 401(k) plan, bonus opportunities, paid holidays, and paid time off. See more information on our benefits here:U.S. Employee Benefits | AccentureRole Location Annual Salary RangeCalifornia $70,350 to $205,800Cleveland $59,100 to $164,600Colorado $63,800 to $177,800District of Columbia $68,000 to $189,300Illinois $59,100 to $177,800Maine $54,400 to $151,400Maryland $63,800 to $177,800Massachusetts $63,800 to $189,300Minnesota $63,800 to $177,800New York $66,300 to $205,800New Jersey $68,000 to $205,800Virginia $59,100 to $189,300Washington $80,200 to $189,300About AccentureAccenture is a leading global professional services company that helps the world’s leading businesses, governments and other organizations build their digital core, optimize their operations, accelerate revenue growth and enhance citizen services—creating tangible value at speed and scale. We are a talent- and innovation-led company with approximately 791,000 people serving clients in more than 120 countries. Technology is at the core of change today, and we are one of the world’s leaders in helping drive that change, with strong ecosystem relationships. We combine our strength in technology and leadership in cloud, data and AI with unmatched industry experience, functional expertise and global delivery capability. Our broad range of services, solutions and assets across Strategy & Consulting, Technology, Operations, Industry X and Song, together with our culture of shared success and commitment to creating 360 value, enable us to help our clients reinvent and build trusted, lasting relationships. We measure our success by the 360 value we create for our clients, each other, our shareholders, partners and communities.Visit us at What We BelieveWe have an unwavering commitment to diversity with the aim that every one of our people has a full sense of belonging within our organization. As a business imperative, every person at Accenture has the responsibility to create and sustain an inclusive environment.Inclusion and diversity are fundamental to our culture and core values. Our rich diversity makes us more innovative and more creative, which helps us better serve our clients and our communities. Read more hereRequesting An AccommodationAccenture is committed to providing equal employment opportunities for persons with disabilities or religious observances, including reasonable accommodation when needed. If you are hired by Accenture and require accommodation to perform the essential functions of your role, you will be asked to participate in our reasonable accommodation process. Accommodations made to facilitate the recruiting process are not a guarantee of future or continued accommodations once hired.If you would like to be considered for employment opportunities with Accenture and have accommodation needs such as for a disability or religious observance, please call us toll free at 1 (877) 889-9009 or send us an email or speak with your recruiter.Equal Employment Opportunity StatementWe believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, military veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by applicable law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities.For details, view a copy of the Accenture Equal Opportunity StatementAccenture is an EEO and Affirmative Action Employer of Veterans/Individuals with Disabilities.Accenture is committed to providing veteran employment opportunities to our service men and women.Other Employment StatementsApplicants for employment in the US must have work authorization that does not now or in the future require sponsorship of a visa for employment authorization in the United States.Candidates who are currently employed by a client of Accenture or an affiliated Accenture business may not be eligible for consideration.Job candidates will not be obligated to disclose sealed or expunged records of conviction or arrest as part of the hiring process. Further, at Accenture a criminal conviction history is not an absolute bar to employment. The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. Additionally, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Company's legal duty to furnish information.California requires additional notifications for applicants and employees. If you are a California resident, live in or plan to work from Los Angeles County upon being hired for this position, please click here for additional important information.Please read Accenture’s Recruiting and Hiring Statement for more information on how we process your data during the Recruiting and Hiring process.SummaryLocation: Atlanta, 75 Fifth, Corp; Milwaukee, 790 N Milwaukee St, Corp; Akron, 12 East Exchange Street, IX; Dallas, 5205 N OConnor Las Colinas, Corp; Columbus, 400 W. Nationwide Blvd, Corp; Kirkland, 416 6th Street South, Corp; Cincinnati, 4th Street, Corp; New York, One Manhattan West, Corp; Austin, 323 Congress Avenue, Corp; Albany, 69 State St, Corp; Chicago, Accenture Tower, Corp; St. Pete, 140 Fountain Pkwy, Tampa Corp; Hartford, 280 Trumbull, Corp; Pittsburgh, 1001 Liberty Ave, Corp; St. Louis, 4220 Duncan Avenue, Corp; Miami, 777 Brickell Ave, Corp; Raleigh, 555 Fayetteville, Corp; Minneapolis, 333 S 7th, Corp; Mountain View, 650 Castro, Corp; Morristown, 1 Speedwell Ave, Corp; Denver, 999 18th St, Corp; Boston, 888 Boylston, Corp; Philadelphia, 2001 Market St, Corp; Des Moines, 909 Locust, Corp; Overland Park, 7300 W 110th Street, Corp; Los Angeles, 6181 W Centinela Ave, Corp; Charlotte, 1120 S Tryon St., Corp; Carmel, 11939 N Meridian St., Corp; Houston, 1301 Fannin, Corp; Arlington, 1201 Wilson, Corp; Bentonville, 805 S Walton Blvd., Corp; Nashville, 4101 Charlotte Ave., Corp; Detroit, 1240 Woodward, CorpType: Full time

Job Description Location: Altoona, Iowa Company: Summit Products Schedule: Full-time, on-site — Monday–Thursday, 7:30 a.m.–5:00 p.m.; Friday, 8:00 a.m.–12:00 p.m. Summit Products is seeking an experienced, operationally minded Controller to lead accounting and financial activities in our manufacturing operation. This role is an important business partner to leadership and operations, responsible for accurate financial reporting, strong internal controls, cost and inventory visibility, and forward-looking financial analysis that supports profitable growth. The ideal candidate is a hands-on manufacturing finance leader who understands how financial decisions connect to the shop floor, materials, labor, inventory, production performance, and customer service. What you’ll do • Lead the company’s accounting function, including month-end and year-end close, general ledger oversight, account reconciliations, financial statement preparation, and cash-flow management., • Prepare timely and accurate monthly financial reports, forecasts, budgets, variance analyses, and management dashboards., • Partner with operations and leadership to analyze manufacturing costs, labor efficiency, material usage, overhead allocation, scrap, inventory accuracy, and margins., • Own and improve standard costing, product costing, inventory valuation, cycle-count processes, and cost-of-goods-sold reporting., • Monitor financial performance against budget and prior periods; clearly explain variances and recommend practical corrective actions., • Maintain effective internal controls, accounting policies, approval processes, and documentation practices., • Coordinate annual budgeting, ongoing forecasting, audit support, tax reporting support, and relationships with external accountants, banking partners, and other financial vendors., • Oversee accounts payable, accounts receivable, payroll coordination, credit/collections support, and other core accounting processes as applicable., • Provide leadership, coaching, and accountability for accounting team members., • Help evaluate capital investments, equipment purchases, pricing decisions, and other key business initiatives., • Improve systems, workflows, reporting tools, and financial processes to increase accuracy, timeliness, and operational insight., • Ensure compliance with applicable accounting standards, tax requirements, and company policies. What we’re looking for • Bachelor’s degree in Accounting, Finance, or a related field required., • CPA, CMA, MBA, or similar credential preferred, but not required., • 7+ years of progressive accounting or finance experience, including leadership responsibility., • Prior Controller, Assistant Controller, Plant Controller, Senior Accounting Manager, or equivalent experience preferred., • Strong manufacturing, distribution, or inventory-intensive business experience is highly preferred., • Demonstrated experience with cost accounting, standard costing, inventory controls, budgeting, forecasting, and financial reporting., • Strong understanding of GAAP, internal controls, reconciliations, and month-end close processes., • Advanced Excel skills and comfort working with ERP/accounting systems., • Clear, practical communication skills and the ability to translate financial information into operational decisions., • High level of integrity, discretion, organization, and follow-through., • Willingness to work fully on site in Altoona and partner directly with operations and leadership. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Disability insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Parental leave, • Professional development assistance, • Referral program, • Tuition reimbursement, • Vision insurance Work Location: In person

Job DescriptionDescription: This position must pass a background check and drug screen. Who we are and what we value: Feed Energy works at the intersection of feed, fuel, and agriculture, building a nearly four-decade legacy of stewardship in various industries. We support how America nourishes its people and powers its economy. Our team is made up of growth-minded individuals, who are dedicated to transforming global practices in feeding and fueling, driving innovation across the industries we serve. We create circular economies, developing sustainable, low-carbon products and processes. Join us if you're looking for a dynamic environment to contribute to shaping a sustainable future for feeding and fueling the world. We help feed the world by providing safe, energy-based nutrition solutions. Creativity - Stewardship - Impact - Integrity - Healthy Relationships Requirements: What you will do: · Plan and lay out work to meet production and schedule requirements. · Document daily maintenance activities, monthly checklists, tank inspections, weekly housekeeping logs. · Maintains, tests, and does preventative maintenance on boilers at prescribed intervals. · Troubleshoots and performs routine mechanical functions including electrical, air and electrical pumps, steam and condensate systems, pipefitting, welding, changing valves, measure brackets, putting gaskets, etc. as needed to keep the plant running in an efficient manner. · Proactively plans future preventative maintenance, capital and budgets, then performs the work on all equipment. · Organizational skills and manages inventory of parts, tools, price shop and order parts, etc. necessary to perform maintenance and repairs on all equipment. · Responsible for housekeeping duties as assigned by Lead Maintenance, Mechanical Services Manager, or Plant Manager · Prepares reports for services rendered, tools used, or time required for billing purposes. · Contributes as a team member/ or Safety Committee in Operations to ensure maintenance needs are being met. · Follows safety rules, PPE and ensures safety training and compliance is up to date. · Required to be on-call and to come in and take care of maintenance needs that arise outside of normal working hours as assigned by Plant Manager or Mechanical Services Manager. · Provide customer service and maintenance assistance as required by external customers. · Knowledge of hand tools. Be able to run a pipe threading machine. What we provide, because we care! · Full benefit package including medical, dental, vision, life and disability · Generous 401k match (up to 6%) · Profit-sharing for all employees · Continuing education · Quarterly bonuses based on performance · Wellness reimbursement up to $300 a year · 40 Hours of PTO that start accruing immediately and increases to 120 Hours at 2 years and 160 Hours at 5 years! · 8 Paid Holidays What you need: · High school diploma or GED · 5+ years of experience in plant related maintenance · Ability to operate Forklift/skid loader equipment, Drivers’ license required · Basic knowledge of electrical (110V, 240V and 480V single and 3-phrase) required · Pipe fitting, pipe fabrication and threading, welding, air and electrical pump experience is required · Good troubleshooting skills is required · Knowledge of computers, Excell, Word, etc. is required · Knowledge of automation and process controls is essential; in-house training provided · Ability to work on boilers, condensing and steamed boilers is highly desirable · Aptitude for fiber glass piping is a plus

Job DescriptionDescription: Lead a High-Impact Plant. Build the Future. Own the Business. Revere Plastics Systems is seeking a General Manager to lead our Ankeny, Iowa manufacturing facility—a key site with strong fundamentals, a committed team, and significant runway for performance and growth. This is more than a plant leadership role. It is an opportunity to own a business, lead a team through continued transformation, and directly shape results across operations, culture, and commercial performance. If you’re a passionate, manufacturing leader who thrives in environments where you can make decisions, build teams, and drive change, this role is built for you. The Opportunity • Full P&L ownership of a ~$10–12M manufacturing operation, • Lead a 40-person, 3-shift operation with diverse manufacturing processes, • Drive measurable impact across:, • EBITDA and cost performance, • Safety and operational execution, • Customer satisfaction and growth, • Step into a role with high visibility and autonomy, partnering directly with executive leadership You won’t inherit a broken plant—you’ll build on a strong foundation and take it to the next level. What You’ll Do - Lead the Business • Own plant performance across financial, operational, and customer metrics, • Drive annual operating plans, forecasting, and performance reviews Make timely, data-driven decisions that balance business needs and customer expectations Build and Develop a Winning Team • Lead and develop a cross-functional leadership team, • Build a strong succession pipeline, including future plant leadership Create alignment across shifts and functions through visible, engaged leadership Shape the Culture • Foster a people-first, high-accountability culture built on Revere’s 4Es (Energy, Energize, Edge, Execute), • Eliminate barriers and create a unified, collaborative team environment Lead with presence on the floor, building trust at all levels Drive Operational Excellence • Lead continuous improvement initiatives that reduce waste and improve efficiency, • Deliver results across key KPIs:, • Safety, • Cost and productivity (DLE), • Customer performance, • Inventory and CI savings, • Ensure disciplined execution of the Revere Business System Strengthen Customer Relationships • Own customer performance, including delivery, quality, and scorecards, • Partner with commercial teams on growth opportunities and new business Serve as a visible leader with key customers Why Revere? • Ownership mindset – GMs run their businesses with autonomy and accountability, • People-first culture – Safety, engagement, and development matter here, • Growth opportunity – Strong path to multi-site leadership Real impact – Your leadership directly drives results, culture, and customer success Location Ankeny, Iowa (Greater Des Moines area) • One of the fastest-growing regions in the state, • Strong community, great quality of life, and access to top talent Who This Role Is Perfect For • A Plant Manager/Operations Manager ready for their first GM role, or, • A General Manager looking for true ownership and the ability to build and leadRequirements: What We’re Looking For Experience • 7–10+ years in manufacturing, with 3–5+ years in plant or operations leadership, • Proven success leading cross-functional teams in a manufacturing environment, • Experience with P&L ownership or strong financial accountability, • Background in plastics, automotive, or similar industries preferred Leadership Profile You are: • A hands-on leader who is visible, accessible, and engaged, • A builder of teams and culture, not just an operator, • A change agent who thrives in environments with opportunity to improve and grow Comfortable making decisions and holding teams accountable Capabilities • Strong operational and financial acumen, • Experience driving continuous improvement / Lean initiatives, • Ability to influence across all levels—from shop floor to executive leadership Proven ability to build trust across a diverse workforce Education • Bachelor’s degree in engineering, Operations, Supply Chain, Business, or related field (or equivalent experience), • Lean / Six Sigma experience preferred

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.

Airbnb was born in 2007 when two hosts welcomed three guests to their San Francisco home, and has since grown to over 5 million hosts who have welcomed over 2 billion guest arrivals in almost every country across the globe.Every day, hosts offer unique stays and experiences that make it possible for

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.

Senior Manager, Revenue Operations & Analytics.Parsley Health · Finance · Remote US, with a preference for Eastern or Central time zones and NYC metro · Full-time.Parsley Health is rebuilding primary care around root-cause, whole-person medicine.Our members get board-certified clinicians, health

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.

Reports to: Director, Strategy and Operations (Research & Development).Location: Remote Work (US Only).Our mission is to make vaccines more accessible, enable innovation and expand immunization across the globe.We seek a future free from vaccine-preventable diseases.We are an innovative, collaborati

As the CRM Operations Manager, you will be responsible for administration, optimization, and governance of the HubSpot platform to support commercial teams and drive adoption Tulsa-PRO and Sonnalleve.Serve as HubSpot SuperAdmin responsible for system configuration, user permissions, integrations, an

Early education is one of the most important determinants of childhood outcomes, a critical support for working families, and a $175B market that remains underserved by modern technology.Brightwheel is the largest, fastest growing, and most loved platform in early ed, trusted by millions of educator

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.

Join a team that’s changing financial services.Zocks is the #1 AI assistant for financial advisors.We help advisors automate their operational work and grow their business.Zocks to turn client conversations into completed work.We're a venture-backed team, building something that changes how financ

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.

We’re a team of friends bound together by a mission to preserve our planet for future generations through innovative energy solutions and modern infrastructure.Intersect develops, constructs, and operates the most ambitious power and data center infrastructure in the country by co-locating industr

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.

Maze is the user research platform that helps companies build the right products faster by making user insights available at the speed of product development.In most companies, research demand far exceeds supply.Time, cost, and lack of access to expertise hold teams back.In today’s AI-powered worl

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.

O'Reilly Automotive - - Responsibilities: Complete deliveries and pickups on assigned city counter routes; Deliver orders safely and accurately; Communicate with city counter management about deliveries; Maintain company vehicle per policy; Train new team members and explain duties.

International Paper - 2800 Dixon Street - Responsibilities: Handle and maintain flow of materials throughout the plant; Complete daily pre-start forklift inspection report; Record bale counts and load times for outbound shipments; Load and unload trailers following lock-out/tag-out procedures; Assis

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.

B&G Foods - - Responsibilities: Attach case identifiers to materials and pallet info; Move finished product to/from warehouse staging; Operate material handling equipment safely; Perform production record keeping and data collection; Perform changeover and setup for production runs.

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.

Cintas Corporation - - Responsibilities: Operate and maintain facility's wastewater system in compliance with regulations; Mix chemicals to wash uniforms and ancillary products; Stand for 7 hours of an 8-hour shift and perform lifting/bending/stretching/twisting; Ensure inventory accuracy and accou

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.

Aerotek - - Responsibilities: Maintain inventory accuracy and label/store materials; Locate and stage materials for production orders; Prepare finished stock for shipment; Operate overhead cranes and other material-handling equipment; Read tape measures to verify lengths.

Counter Sales - Warehouse - Forklift AssociateHiring a warehouse associate with forklift and counter sales or customer service experience to support an HVAC manufacturing organization that is the leader in climate control products.Need a team player who is okay with helping where needed in the store

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.

Cintas Corporation - - Responsibilities: Unload soiled products from company trucks; Load clean uniforms, mats, and customer items onto trucks; Maintain cleanliness of work area and meet loading standards; Adhere to safety procedures and PPE; Operate within designated routes and schedules.

Home Depot - - Responsibilities: Load and unload trucks within the facility; Move material within the facility and from loading platforms; Operate hand trucks, forklifts, hoists, motorized conveyors, and other material handling equipment; Sort, staging, and transport products to appropriate locatio