Software engineer jobs in Louisville, KentuckyCreate job alerts

About Midea America Corp Midea America Corp. is one of the world’s largest home appliance brands, offering the most comprehensive selection of products in the world to fully serve the needs of day-to-day living at home, at work, or anywhere else you go. In North America we strive to aim high, put the customer first, transform, and innovate the marketplace, utilizing our commitment, dedication, inclusion, and partnership with our teams. We are a global company with over 150,000 employees and operations in more than 195 countries. As a publicly listed company, we are also ranked #245 as a Fortune Global 500 company and offer one of the most comprehensive ranges in the home appliance industry. We are seeking an experienced Mechanical Engineer in water softener valve technology to lead the development and optimization of valves and related components for our next-generation water softening systems. This role will focus on enhancing product performance, manufacturability, and quality across global markets. Location: Louisville KY Job Responsibilities: • Lead the design and development of core components for water softener platforms, including control valve heads and distributors, to meet diverse performance and market requirements., • Serve as project manager throughout the product lifecycle—overseeing design reviews, mold testing, pilot runs, and mass production—while ensuring quality and timely delivery., • Drive continuous improvement initiatives in product quality, standardization, and cost optimization., • Provide technical leadership and support across global soft water projects, helping to build internal expertise and team capabilities in softener technologies., • Prepare and maintain comprehensive technical documentation throughout the development process, ensuring compliance with R&D protocols and quality management standards. Qualifications: • Bachelor’s degree or higher in Mechanical Design, Materials Science, Mold Engineering, or related fields., • Minimum of 5 years of experience in developing water softener systems and core components. Must have led the end-to-end design of at least three complete softener products, including valve heads, distributors, and brine tanks., • Strong understanding of product architecture with proven experience in platform-based and modular design strategies. Proficient in CAD and 3D modeling software (e.g., CREO, AutoCAD)., • Well-versed in product reliability requirements and production processes. Familiar with industry-standard workflows for new product development., • Exceptional analytical thinking, project coordination, and cross-functional communication skills. Strong sense of ownership, service mindset, and ability to execute effectively in a team environment. Midea America Corp. is an equal opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Featured benefits • Medical insurance, • Vision insurance, • Dental insurance, • 401(k)

The Construction Project Manager supports the Engineer Procure Construct (EPC) Project Manager or Program Manager to oversee day-to-day operations from pre-construction through project completion and warranty periods. The Construction Project Manager is responsible for managing the construction project safety, quality, schedule, cost control, contracts, subcontractors, suppliers, proposals, estimates, documentation turnover, client relations/management, field staff and other duties required to execute EPC, Construction Management, Construction, and Program Management projects. Responsibilities • Adhere to company’s safety programs, trainings, and policies, as well as promote and manage the Safety & Health performance of project team members and subcontractors., • Responsible for the oversight of day-to-day construction activities and the successful execution of a single or multiple projects simultaneously., • Provide direction and participate in project planning, scheduling, estimating, cost development, and establishing critical project objectives., • Develop new and manage existing client relationships while interfacing with the client for proposal and project related items., • Participate in internal and external project risk reviews and consult with Legal Department as required., • Negotiate prime contracts, CM contracts, subcontracts, and change orders., • Participate in risk review process. Qualifications • Excellent computer skills and proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint and Access)., • Experience with document control, scheduling, cost control and project management software is preferred., • Excellent written and verbal communication skills and strong organizational skills., • Strong analytical and problem-solving skills, and attention to detail., • Ability to handle large volumes of work and multi-task in a fast-paced environment., • Multiple years of experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transportation, transmission & distribution, or water is preferred.

Job Description Senior Civil Engineer Cornerstone Engineering, Inc. Cornerstone Engineering, Inc. is an award-winning and fast-growing AEC firm that values commitment, excellence, and integrity. We have built our reputation by delivering successful projects to a broad array of clients in the public and private sectors, including with local and federal government. Position Overview: As a Senior Civil Engineer at Cornerstone Engineering, Inc., you will take a leadership role in the design, coordination, and delivery of complex civil engineering projects. You’ll oversee infrastructure, site development, and utility design efforts while guiding project teams, mentoring junior staff, and ensuring client satisfaction. This is a key position for an experienced civil engineer looking to make a significant impact within a growing, multidisciplinary firm. Job Responsibilities: • Lead and manage the design of civil engineering projects including site development, grading, stormwater management, roadways, and utility systems., • Conduct and oversee site evaluations, design calculations, feasibility analyses, and technical reports., • Coordinate and collaborate with internal and external teams, including engineers, architects, contractors, and regulatory agencies., • Review and approve plans, specifications, and other technical documentation., • Serve as a client liaison—communicating project progress, addressing concerns, and ensuring client goals are achieved., • Provide mentorship and direction to junior engineers, designers, and technical staff., • Ensure project compliance with local, state, and federal regulations., • Support project management functions including resource planning, budgeting, and quality control., • Bachelor’s degree in Civil Engineering from an accredited institution., • Active Professional Engineer (PE) license in Tennessee, or ability to obtain within six months., • Minimum 8 years of progressive experience in civil engineering, with emphasis on site development and infrastructure projects., • Proficiency in AutoCAD, Civil 3D, and other industry-standard design software., • Strong understanding of stormwater design, grading, and utility systems., • Excellent leadership, communication, and client-facing skills., • Proven ability to manage project teams and deliver projects on schedule and within budget. At Cornerstone Engineering, we are committed to a collaborative approach built on three core principles: Commitment to Staff and Clients • Treat others with respect., • Set and work toward shared goals., • Provide value-added services., • Strive to exceed client expectations., • Act with fairness and honesty., • Serve clients and colleagues with a focus on trust and reliability.

Job DescriptionA civil engineering firm located in multiple locations is seeking a Water Resources Engineer for their Louisville team! Responsibilities: • Key point of contact for clients, contractors and local government officials, • Assist with review of project scope/proposals, • Design/manage treatment, wastewater collection and water system conveyance facilities, • Prepare grant applications and secure project funding for small to medium-sized systems, • Design wastewater treatment facilities improvements to meet environmental regulations, • Manage water, wastewater and reclaimed water supply through planning, modeling and permitting, • Mentor/train junior staff Requirements: • Bachelor’s degree in Civil/Environmental Engineering, • 5+ years of Civil Engineering experience, • PE License, • Design experience with a focus on water resources and/or environmental engineering, • Proficient in AutoCAD Civil 3D, XPSWMM, WaterGEMS, SewerGEMS, and WaterCAD, • Experience with HECRAS, HECHMS, PondPak, HY-8, and GeoPAK Drainage Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its 2025 Design Award winner for Inclusivity. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. Overview The responsibilities of our Platform team include building and maintaining all backend services, including, but not limited to, payments, analytics, subscriptions, new products, text to speech, and external APIs. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, is passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do • Design, develop, and maintain robust APIs including public TTS API, internal APIs like Payment, Subscription, Auth and Consumption Tracking, ensuring they meet business and scalability requirements, • Oversee the full backend API landscape, enhancing and optimizing for performance and maintainability, • Collaborate on B2B solutions, focusing on customization and integration needs for enterprise clients, • Proven experience in backend development: TS/Node (required), • Direct experience with GCP and knowledge of AWS, Azure, or other cloud providers, • Efficiency in ideation and implementation, prioritizing tasks based on urgency and impact, • Preferred: Experience with Docker and containerized deployments, • A dynamic environment where your contributions shape the company and its products, • A team that values innovation, intuition, and drive, • Autonomy, fostering focus and creativity, • The opportunity to have a significant impact in a revolutionary industry, • Competitive compensation, a welcoming atmosphere, and a commitment to an exceptional asynchronous work culture, • The privilege of working on a product that changes lives, particularly for those with learning differences like dyslexia, ADD, and more Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description Hazen is seeking a qualified and experienced Project Engineer to support the planning, design and construction of water and wastewater facility infrastructure in Lexington or Louisville Kentucky. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Work on a wide range of projects to include planning, design, permitting, and construction of structures in water and wastewater (i.e. drinking water, wastewater, water resources, conveyance), • Client development opportunities, • Project management opportunities, • Technical leadership and staff mentoring opportunities across Hazen’s Midwest region, • 5 - 10 years of experience in relevant municipal water/wastewater design and construction experience, • Experience in planning, design, and construction for water and wastewater treatment facilities, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Proficient in all MS Office based computer software, • PE license (KY preferred or ability to obtain reciprocity within six months of employment), • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Join our team at TowerPinkster and open a new door to an amazing career! TowerPinkster, an architecture, engineering, and interior design firm based in Michigan, Indiana, and Kentucky, is looking for a talented Senior Structural Engineer with ten to fifteen years of professional experience in the AEC industry. This position is responsible for the structural analysis and design of buildings and assisting in the preparation of structural engineering calculations and specifications. Must be able to develop drawings within a BIM Environment. This position carries with it the potential to develop into a leadership role, providing coaching and mentoring of the Kalamazoo Structural Team. These responsibilities would include assisting in management of workload for team members who report to you, including scheduling of team members, providing mentoring, career pathing and professional development of team members reporting to you, and partnering with the Manager of the Department to create an effective leadership team and consistently look for process improvement opportunities. POSITION RESPONSIBILITIES + EXPECTATIONS CULTURE • Encourage positive communication among team members and across disciplines., • Create opportunities to enhance teamwork, create inclusion, and a positive work environment., • Strive to cultivate equity, respect, integrity, humor, and the celebration of talent., • Play a part in maintaining long-standing relationships with clients., • Assist in business development functions, including networking to create connections with potential department candidates, and maintain involvement in professional organizations., • Participate in the process of interviewing prospective new clients to understand their needs., • Collaborate with the client in planning design, determining solutions and scope of the project to develop a structural approach to meet client needs.PROJECT, • Serve as a senior subject matter expert to resolve project structural challenges., • Lead and coordinate project efforts with other disciplines, clients, and construction partners to meet schedule milestones., • Assist with quality checks and ensure the reviews of all projects., • Conduct facility assessments, field assessments, and engineering studies., • Mentor team to share experiences, knowledge, skills, and lessons learned for continuous improvement., • Assist the Manager of the department in creating training and mentorship opportunities for individuals and the team., • Provide input on work priorities and project scheduling., • Conduct quality control reviews on various projects, • Serve as a structural engineering subject matter expert to resolve project issues., • Provide input to department standards and procedures., • Leadership duties which could develop as part of this role:, • Establish appropriate staffing levels and workload assignments through collaboration with the Manager, Operations and Business Development Team., • Project future staffing needs and participate heavily in recruiting efforts for future staff., • Meet on a regular basis with the Manager to understand the entire workload and projections of the firm and evaluate the assignments for current and future projects., • Guide young professionals through the Licensure Process., • Conduct performance reviews of team members reporting to you., • Bachelor’s Degree in Civil, Structural or Architectural Engineering from an accredited program., • Professional Licensure., • 15 years’ experience in the A/E Industry preferred., • 10+ years’ experience leading project teams., • In-depth knowledge of A/E construction documents and construction industry preferred., • Ability to lead and support a talented team., • Participation in professional organization memberships., • Knowledge and experience in REVIT software, as well as standard structural engineering software (RISA 3D, RAM Structural System, RAM Elements, Tedds, and similar programs)., • The appropriately qualified candidate should be able to perform in-depth structural analysis and design on a wide variety of structural materials and systems, including concrete, steel, light gauge steel, masonry, and timber., • Coordination of design work with in-house staff professionals including architects and other engineering disciplines., • Industry-leading compensation package, including paid overtime, performance bonuses, and profit sharing., • National award-winning culture and a supportive work environment that empowers employees to stay healthy, fulfill their interests and passions, and balance work and life goals., • Industry-leading compensation package, including paid overtime, performance bonuses, and profit sharing., • A collaborative work environment along with many culture connection events., • Flexible work hours with a Work-Life Balance program providing six additional days off per year, and a healthy Paid Time Off program., • A comprehensive benefits package including health, dental, vision, 401(k), life insurance, short term and long-term disability benefits,, • Paid community service hours., • Annual team training and professional development opportunities., • The opportunity to reach your career goals with an award-winning Firm. We highly encourage licensure, certification and professional organization memberships which are Firm paid. We strive to create a diverse, equitable, and inclusive culture that empowers each person to be their genuine self. We are committed to Diversity, Equity, and Inclusion. For more than 70 years, we have made significant contributions to our communities through our commitment to quality, sustainable, and equitable design. Our active DEI committee is focused on driving initiatives within three areas: people, purpose, and process. Our expertise and collaborative, client-centered approach means the best ideas rise to the top. TowerPinkster received the 2024 National 101 Best and Brightest Companies to Work for Award and the 2024 Best Firm Award from Zweig Group. We are proud of this achievement and are thankful for our client relationships, our generous communities, and all the employees who contribute to TowerPinkster’s exciting and creative culture! Our supportive work environment helps employees reach their career goals, and we have fun doing it! . We are an Equal Opportunity Employer Powered by JazzHR j2g9BR9RsD

Job Description Hazen and Sawyer is seeking an Instrumentation & Control (I&C) Systems Engineer to join our team in one of the following offices: Cleveland, OH; Detroit, MI; Louisville, KY; Lexington, KY; or another Midwest office to deliver I&C designs for water and wastewater projects to our clients in the Midwest. The applicant may have the option to work in some or any of these locations with some remote work possible. Candidate will develop I&C system designs for the water and wastewater industry with the potential for limited Human Machine Interface (HMI) and Programmable Logic Controller (PLC) programming/configuration work. Candidate will write technical memoranda; develop Process and Instrumentation Diagrams (P&IDs), control system architecture drawings, and installation details; prepare instrumentation and control system specifications; prepare cost estimates for projects; review & approve documentation developed by contractors; and conduct factory testing, field acceptance testing, and startup of I&C systems. Must know how to use AutoCAD or AutoCAD Plant 3D or be willing to learn. Qualified candidates will serve as the Lead Instrumentation & Control Systems Engineer on projects for water and wastewater facilities. Responsibilities will include supervision and mentoring of entry-level staff and designers working on projects, a high level of interaction with clients, and coordination with engineers from other firms and disciplines. Requirements: • 10-20 years of Instrumentation and Controls Design experience. More or less experience will be considered., • Professional Engineering (PE) license, • Experience with AutoCAD is desired., • Working knowledge of the National Electric Code (NEC), National Fire Protection Association (NFPA) Life Safety Codes, and other related Codes and Standards are required., • Good verbal, writing, and interpersonal skills are required for coordination with other disciplines, contractors, and clients., • Electrical experience is desired., • Control system software configuration/programming capability desired.

Job Description Join our team at TowerPinkster and open a new door to an amazing career! TowerPinkster, an architecture, engineering, and interior design firm based in Michigan, Indiana, and Kentucky, is looking for a skilled Senior Professional Electrical Engineer. This position is responsible for building relationships and collaborating with clients at the planning level to determine solutions and develop Electrical System plans. In addition, this position is responsible for designing electrical systems for projects from beginning of design to completion of construction administration, leading the design team through the development of contract documents of significant scale and/or complexity, and participating in new business development and marketing efforts. POSITION EXPECTATIONS AND RESPONSIBILITIES: Culture • Encourage positive communication among team members and across disciplines., • Create opportunities to enhance teamwork, create inclusion, and a positive work environment., • Strive to cultivate equity, respect, integrity, humor, and the celebration of talent.CLIENT, • Perform business development functions, including marketing, and networking to create personal connections and involvement in professional organizations., • Participate in the process of interviewing prospective new clients to understand their needs., • Collaborate with the client in planning design, determining solutions and scope of the project to develop an electrical system plan to meet client needs., • Construct the scope of work and determine a budget., • Manage existing client relationships and develop relationships with future clients.PROJECT, • Lead project team to create electrical engineering solutions, design documents, and spec Provide an assessment of existing building systems and provide the client with recommendations on needed maintenance, available savings, and/or rebates for upgrades., • Provide system design solutions, design documents, specifications, and project communications., • Design electrical systems, design lighting layouts, and design fire alarm systems to meet client needs and code requirements., • Oversee the production of all phases of construction documents, which include schematic documents, design documents, construction documents, bidding, and construction administration., • Conduct facility assessments, field assessments, engineering studies, perform commissioning work, and site visits., • Create and write reports and presentations to clients., • Perform as Project Manager on electrical-driven projects., • Lead and coordinate project efforts with other disciplines, clients, and construction partners to meet schedule milestones.MENTORSHIP, • Mentor team to share experiences, knowledge, skills, and lessons learned for continuous improvement., • Prepare and review “red lined” documents for Electrical Designer and Electrical Engineer growth and development., • Lead, teach, and guide other project team members to assist in their growth and development. LEADERSHIP, • Provide input on work priorities and project scheduling., • Conduct quality control reviews on various projects, • Serve as a electrical subject matter expert to resolve project issues., • Provide input to department standards and procedures.POSITION QUALIFICATIONS:, • A bachelor’s in electrical engineering accredited program is required., • A Professional Engineers License (P.E.) or the ability to obtain licensure within 1 year is required., • Ten Years of professional experience in the AEC industry is preferred., • Experience mentoring, training, and overseeing projects as a lead electrical engineer., • Revit software experience preferred., • Proficient in Word, Excel, and PowerPoint., • Knowledge of power distribution and associated equipment., • Knowledge of lighting technologies and lighting control systems., • Knowledge of fire alarm requirements and different types of building requirements., • Knowledge of drawing, scheduling, and coordinating design components in 3D drafting software., • Industry-leading compensation package, including paid overtime, performance bonuses, and profit sharing., • National award-winning culture and a supportive work environment that empowers employees to stay healthy, fulfill their interests and passions, and balance work and life goals., • Industry-leading compensation package, including paid overtime, performance bonuses, and profit sharing., • A collaborative work environment along with many culture connection events., • Flexible work hours with a Work-Life Balance program providing six additional days off per year, and a healthy Paid Time Off program., • A comprehensive benefits package including health, dental, vision, 401(k), life insurance, short term and long-term disability benefits,, • Paid community service hours., • Annual team training and professional development opportunities., • The opportunity to reach your career goals with an award-winning Firm. We highly encourage licensure, certification and professional organization memberships which are Firm paid. We strive to create a diverse, equitable, and inclusive culture that empowers each person to be their genuine self. We are committed to Diversity, Equity, and Inclusion. For more than 70 years, we have made significant contributions to our communities through our commitment to quality, sustainable, and equitable design. Our active DEI committee is focused on driving initiatives within three areas: people, purpose, and process. Our expertise and collaborative, client-centered approach means the best ideas rise to the top. TowerPinkster received the 2025 National 101 Best and Brightest Companies to Work for Award and the 2025 Best Firm Award from Zweig Group. We are proud of this achievement and are thankful for our client relationships, our generous communities, and all the employees who contribute to TowerPinkster’s exciting and creative culture! Our supportive work environment helps employees reach their career goals, and we have fun doing it! . We are an Equal Opportunity Employer

Job Description GRW Engineers, Inc. is seeking a Senior Water Resources Engineer in our Louisville office to build and maintain a portfolio of profitable water/wastewater utilities projects in support of GRW's water resource engineering team. GRW is a regional, multi-disciplined firm with a desire for growth, and the firm has been listed in the ENR Top 500 since 1973. Founded in 1964, GRW's dedication to service has resulted in repeat clients providing up to 90 percent of GRW's workload. Principals and associates representing many disciplines work one-on-one with our clients. Close, personal service is the hallmark of GRW's business philosophy. GRW offers a challenging work environment combining the latest in engineering concepts with career development to keep personnel up to date with the latest technologies and advancements. Responsibilities will include planning, design and construction administration of utility infrastructure projects. Site visits and client/public meetings will be incorporated. Your personal capabilities, interest, aptitude, and motivation will determine your professional growth. Ownership opportunities are available for the right candidate. GRW is seeking the following qualifications: • Minimum of a Bachelor's of Science in Civil Engineering. Master's degree is preferred., • Kentucky Professional Engineer (PE) registration., • 15+ years of experience with design and construction administration of water utility and wastewater utility infrastructure projects in a consulting environment., • Strong technical background and experience in water resource engineering. Must be proficient at the execution of planning, design, bidding, and construction administration phases of water infrastructure projects., • Candidate should have excellent marketing and business development skills in addition to contacts/relationships within the industry., • Experience with the development of proposals., • Proficient at Project Management. Must prepare scope-of-work and level-of-effort estimates for contract proposals; must lead and manage team for successful execution of contracted scope, budget, and schedule., • Exceptional Client Service Management. Must develop and maintain a healthy network of clients., • Proven leadership skills. Must develop, mentor, and oversee a highly motivated team., • Software knowledge: Microsoft Office. Newforma preferred., • Excellent oral and written English communication skills., • High level of organizational skills and attention to detail., • Excellent time management skills., • Ability to work well independently and as part of a team., • Desire, motivation and ability to exceed the firm's and clients' expectations. GRW looks for individuals eager to advance their skills and work on teams with other dedicated employees to complete the projects our clients need. Hiring the most qualified employees is critical to us and the success of our company. When you join GRW you'll be working for an award-winning, full-service design consulting firm with a history of more than 50 years serving our regional, national, and occasionally international clients. Our objective is simple. We value our employees and take pride in providing them with the proper resources and tools to help them achieve professional excellence. This type of opportunity does not become available often! We invite you to apply to join our team! Equal Opportunity Employer/Veterans/Disabled Job Posted by ApplicantPro

Job Description Structural Engineering Project Manager Cornerstone Engineering, Inc. Cornerstone Engineering, Inc. is an award-winning and fast-growing AEC firm that values commitment, excellence, and integrity. Headquartered in Louisville, KY, we specialize in delivering high-quality design, engineering, and consulting services to clients in both the public and private sectors—including federal, municipal, and commercial markets. Our team is driven by a collaborative spirit and a dedication to delivering smart, sustainable solutions. We’re seeking a skilled and motivated Structural Engineering Project Manager who is ready to lead complex design projects, mentor younger engineers, and be a trusted client liaison. Position Overview: As a Structural Engineering Project Manager at Cornerstone, you will oversee structural engineering design and coordination from concept through construction. You will manage project schedules, budgets, and deliverables while collaborating closely with clients, architects, and internal team members. Your ability to communicate clearly, lead effectively, and balance multiple priorities will be key to ensuring successful outcomes across a wide range of building types and structural systems. Job Responsibilities: • Lead the planning, design, and delivery of structural engineering projects from start to finish., • Manage project budgets, schedules, and resources., • Prepare calculations, drawings, and specifications for various building systems (steel, concrete, wood, and masonry)., • Coordinate with internal and external design teams, including architects and MEP engineers., • Oversee and mentor junior engineers and support staff., • Review and approve structural plans, reports, and submittals., • Conduct site visits and construction administration tasks as needed., • Ensure all design work complies with relevant codes and client standards., • Serve as the primary point of contact for clients and ensure consistent, clear communication throughout each project., • Contribute to proposals, marketing efforts, and business development initiatives. Minimum Qualifications: • Bachelor’s degree in Civil or Structural Engineering (Master’s preferred)., • Professional Engineer (PE) license required; SE license a plus., • 5+ years of experience in structural engineering with a focus on building design., • Proven experience managing multi-discipline design projects., • Strong technical skills in structural analysis and design software (e.g., RISA, RAM, ETABS, Revit)., • Familiarity with IBC, ASCE 7, ACI, AISC, and other relevant codes and standards., • Excellent organizational, written, and verbal communication skills., • Experience working with federal or municipal clients is a plus., • Must be legally authorized to work in the U.S. and able to travel as needed. Required Skills and Abilities: • Strong leadership and team management capabilities., • Client-focused mindset and ability to build lasting relationships., • Detail-oriented and deadline-driven., • Ability to multitask and manage several projects simultaneously., • Commitment to high-quality work and continuous improvement. Corporate Culture: At Cornerstone Engineering, we believe in a collaborative approach that is founded on the principles of Commitment, Excellence, and Integrity to our clients and our team members: Commitment to Staff and Clients: • Treat others with respect., • Set and work toward common goals., • Communicate clearly and effectively. Excellence in Performance and Production • Provide value-added benefits., • Exceed client expectations., • Deliver services and products on time and within budget. Integrity in Behavior • Deal with clients and associates fairly., • Practice honesty in all endeavors., • Focus on a servant-leadership attitude. If you’re looking for a career where your voice is heard, your leadership is valued, and your work makes a real impact—Cornerstone Engineering is the place for you. We look forward to welcoming the right person to our growing team.

Job DescriptionDescription: JOB TITLE: Mechanical Project Engineer REPORTS TO: Director, Mechanical Engineering JOB STATUS: Full Time FLSA STATUS: Exempt DATE: April 2025 JOB SUMMARY: The Mechanical Project Engineer will play a critical role in the design, organization, deployment, and leadership of baggage handling systems and components. You will collaborate successfully with stakeholders including project managers, principal engineers, engineering designers and design engineers, other engineering disciplines, procurement, and field services to complete baggage handling projects successfully. You will focus on safe, high-quality output, on schedule and on budget. Our Mechanical Project Engineer would be responsible in part for overall ownership, design, and supervision of a project, based on customer specifications and as-sold information. You would understand the system fully and make design decisions, work with the customer to ensure their needs are fully met, requisitioning all applicable materials, and lead the mechanical engineering team on a project. You will direct the creation of comprehensive, detailed installation and component level drawing packages per customer specifications and field installation team requirements. ESSENTIAL FUNCTIONS: • Aid in design of custom baggage handling systems using CAD software (2D AutoCAD, 3D Inventor)., • Perform engineering calculations, such as horsepower and speeds., • Collaborate with internal stakeholders, such as project management, procurement, field services, and other engineering disciplines to ensure mechanical engineering is aligned fully with the organization., • Represent the company appropriately during detailed design reviews and other collaborative participation with customers and consultants., • Work together with vendors to ensure adherence of design and quality., • Lead a team of designers, design engineers, and lead designers., • Track the project against schedule, scope, and budget., • Create budgets and forecasts for both cost and hours., • Identify potential issues, provide efficient solutions, and make decisions when required., • Create and maintain equipment Manifests and other engineering documentation., • Review detailed field installation drawings containing detail for customer approval and field installation ease., • Ensure all designs comply with specifications and standards., • Lead design reviews and other regular meetings., • Provide support during fabrication and construction, both in office and on-site as required. WORK ENVIRONMENT: • Office primarily, with occasional field visits., • Up to 20% travel may be required. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • High productivity in office., • Sitting for prolonged periods of time., • Repetitive typing/data entry., • Lifting up to 20 pounds. WORK SCHEDULE: This position works in office. General office hours are M-F, 7a-4p or 8a-5p. Working hours may vary to meet project requirements. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Excellent leadership and delegation skills., • Ability to read and understand customer specifications, engineering drawings, Bills of Material, and equipment Manifests., • Detail oriented, organized, and quality driven., • Ability to multi-task and change focus rapidly., • Critical thinker and problem-solver., • Self-starting instincts and motivation to work independently., • Capable of handling stress in a fast-paced, deadline driven environment., • Excellent verbal and written communication skills. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor’s degree, or equivalent in years of experience., • 5+ years’ experience in conveyance, construction, or other system-level engineering functions, or relevant project engineering experience., • Knowledge of conveyor systems, specifically baggage handling, is a plus., • Proficiency in CAD Software (AutoCAD, Inventor, or similar)., • Experienced use of Microsoft Office (Excel, Outlook, Project), • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed.

Job DescriptionDescription: JOB TITLE: Controls Engineer II REPORTS TO: Engineering Manager JOB STATUS: Full Time FLSA STATUS: Exempt JOB SUMMARY: The Controls Engineer II is responsible for the advanced support of all phases of a controls project to include concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working with minimal supervison. A successful Controls Engineer II has an advanced level of knowledge and understanding of commonly used controls engineering concepts, PLC programming and practices with an ability to lead/mentor entry level Controls Engineers as well as a willingness to attend training to further build their knowledge and abilities to advance to the next level. ESSENTIAL FUNCTIONS: • Understand AC/DC control systems with the ability to read component cut sheets., • Able to use computer software for design engineering and PLC programing., • Capable of trouble shooting a system and communicate status – verbally and written., • Assist and support the process for designing and delivering successful control., • Designing and developing layouts for electrical circuits or systems for power and control distribution., • Support the Systems Checklist for projects during field installation and startup., • Ability to develop electrical diagrams with varying levels of efficiency while being able to locate and correct mistakes found in electrical diagrams by themselves and others., • Ability to take the controls lead on project teams., • Capable of creating functional system test plans for use in field commissioning and ability to contribute written descriptions of system operations for technical documents., • Communicate with other team members effectively and keep Administrative Coordinator advised of schedule; checking and using voicemail and email diligently; and maintaining the team relationship., • Other responsibilities as needed. WORK ENVIRONMENT: • Office setting and field locations., • Collaborative, engaging and success driven culture, • Travel up to 50% or more PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Sitting for prolonged periods of time when in office, • Standing and walking for prolonged periods of time when at a jobsite, • Climbing may be required when working at a jobsite, • Repetitive typing/data entry, • Lifting up to 50 pounds WORK SCHEDULE: This position works in office when not traveling to job site. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements of the project as needed. It is the policy of Sortation Labs, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, Sortation Labs, LLC will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Advanced proficiency in several programming languages and control device networks for PLCs., • Ability to read and understand written specifications, as well as contract drawings and?be capable?of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, and manufacturing., • Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver, • Self-starting instincts and strong analytical skills, • Excellent verbal and written communications skills, • Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs., • Experience Required:, • PLC programming, debugging and commissioning, • Plan/hardware design, • AutoCAD (AutoCAD E desired), • Microsoft Office Suite, • Basic knowledge of electrical equipment and local building codes such as UL508a, NEC and NFPA, • Experience Preferred:, • Hands-on mechanical and electrical capabilities, • Troubleshooting, • Material Handling, • Bachelor's degree in engineering – preferably EE, EET or CECS, or equivalent work experience, • 3-5 years in the field or related area., • Legally authorized to work in the United States, • Ability to obtain facility security clearance as needed

Job Description PURPOSE Automation Technicians will be responsible for supporting our Project Managers and System Engineers with creating, installing, and commissioning of PLC/HMI/SCADA based systems as well as network and device integration work. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Complete start up and commissioning of new PLC/HMI/SCADA control systems, service and maintenance of existing installations, fault diagnoses, hardware repairs, programming bug fixes and alterations on customer sites, • Complete diagnosing and resolving technical problems on job sites and provide appropriate reports to Project Management or Operations Leaders via email, SharePoint, OneDrive, or other repository applications, • Attend and participate in project kickoff and turnover meetings with Project Managers to gain knowledge of project estimate, scope and finalize project completion documentation, • Organize and maintain control submittal project redlines and submit to design engineer at project conclusion for as built drawing package creation, • Work with other technicians to develop and share technical solutions, • Actively participate in technician training to maintain technical expertise on new products, tools, and integration through continuing education initiatives MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Associate’s degree specialized in Robotics, Automation, Technology or Minimum of 3-5 years of experience with PLC/HMI control system in lieu of Associate’s degree, • Or Bachelor’s degree specialized in Technology, Engineering, Manufacturing MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Working knowledge of at least one PLC software (i.e. Rockwell Suite, Modicon Unity Pro or Control Expert, Mitsubishi, or many others), • Working knowledge of at least one HMI software (i.e. Rockwell FactoryTalk View or Wonderware InTouch, or many others), • Working SCADA knowledge of at least one platform (i.e. Ignition, Factory Talk View SE, Optix, GE iFix, Ecostruxure Power Operations or SCADA, and many others), • Knowledge of common Windows Office applications and Repositories (i.e. OneDrive, SharePoint, GIT), • Knowledge of Microsoft SQL or other database applications preferred but not required, • Knowledge of Ethernet and serial network communication formats and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Excellent interpersonal skills with ability to communicate effectively, both orally and written, • Ability to travel to customer locations for overnight work approximately 25% ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk working on a computer, • Must be able to lift 20 pounds occasionally, • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature and weather conditions EQUIPMENT/TOOLS • Laptop Computer Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job Description PURPOSE Automation Technicians will be responsible for supporting Project Managers and System Engineers with creating, installing, and commissioning of PLC/HMI/SCADA based systems as well as network and device integration work. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Assist with project programming, start up, and commissioning of new PLC/HMI/SCADA control systems, service and maintenance of existing installations, fault diagnoses, hardware repairs, and programming bug fixes and alterations on customer sites, • Assist with diagnosing and resolving technical problems on jobs and provide appropriate reports to Project Management or Operations Leaders via email, SharePoint, OneDrive, or other repository applications, • Attend project kickoff and turnover meetings with Project Managers to gain knowledge of project estimate and scope and final project completion documentation, • Organize and maintain control submittal project redlines and submit to design engineer at project end for as built drawing package creation after review from Team Lead or Senior Engineer, • Work with other technicians to develop and share technical solutions, • Actively participate in technician training to maintain technical expertise on new products, tools, and integration through continuing education initiatives MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Minimum of three years of experience with PLC/HMI control system preferred, • Or A.A.S degree specialized in Robotics, Automation, Technology or in process of completion MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Working knowledge of at least one PLC software (i.e. Rockwell RSLogix, Studio 5000, CCW, Modicon Unity Pro, Mitsubishi, or many others), • Working knowledge of at least one HMI software (i.e. Rockwell FactoryTalk View or Wonderware InTouch, or many others), • Working SCADA knowledge preferred but not required (i.e. Ignition, Factory Talk View SE, Optix, GE iFix, Ecostruxure Power Operations or SCADA, or many others), • Knowledge of common Windows Office applications and Repositories (i.e. OneDrive, SharePoint, GIT), • Knowledge of Microsoft SQL or other database applications preferred but not required, • Knowledge of Ethernet and serial network communication formats and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Excellent interpersonal skills with ability to communicate effectively, both verbal and written, • Ability to travel to customer locations for overnight work approximately 25% ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk working on a computer, • Must be able to lift 20 pounds occasionally, • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature and weather conditions EQUIPMENT/TOOLS • Laptop computer Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job DescriptionDescription: JOB TITLE: Controls Engineer III REPORTS TO: Engineering Manager JOB STATUS: Full Time FLSA STATUS: Exempt JOB SUMMARY: The Controls Engineer III is responsible for leading all phases of a controls project to include concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working independently. A successful Controls Engineer III has an expert level of knowledge and understanding of the full scope of controls engineering practices, theories, and PLC programming to implement the controls for a project from concept to completion. The Controls Engineer III serves as a subject matter expert and resource for their team and provides coaching and guidance while working at a job site or in-office collaboration. To keep their knowledge up-to-date, the Controls Engineer III will attend training in the latest controls technology and have the ability to share that knowledge with less experienced controls engineers as well as work collaboratively with the Engineering Manager to provide insight on the latest advancements in the field of controls engineering to implement new standards for the company. ESSENTIAL FUNCTIONS: • Expert understanding of AC/DC control systems., • Use of computer software for design engineering and PLC programing., • Capable of trouble shooting a system and communicate status – verbally and written., • Assist and support the process for designing and delivering successful control., • Designing and developing layouts for electrical circuits or systems for power and control distribution., • Develop/create electrical diagrams with expert level of efficiency., • Ability to locate and correct mistakes in electrical diagrams developed by others on the team and use this information as a training opportunity for others to foster the continuous improvement of their skills. (Transfer of knowledge), • Be the controls lead and manage other engineers on project teams., • Capable of creating functional system test plans for use in field commissioning and provide written descriptions of system operations for technical documents., • Communicate with other team members effectively and keep Administrative Coordinator advised of schedule; checking and using voicemail and email diligently; and maintaining the team relationship., • Other responsibilities as needed. WORK ENVIRONMENT: • Office setting and field locations., • Collaborative, engaging and success driven culture, • Sitting for prolonged periods of time when in office, • Standing and walking for prolonged periods of time when at a jobsite, • Climbing may be required when working at a jobsite, • Repetitive typing/data entry, • Lifting up to 50 pounds WORK SCHEDULE: This position works in office when not traveling to job sites. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements of the project as needed. It is the policy of Sortation Labs, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, Sortation Labs, LLC will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Advanced proficiency in several programming languages and control device networks for PLCs with good aptitude for learning the programming for new/additional systems., • Ability to read and understand written specifications, as well as contract drawings and?be capable?of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, and manufacturing., • Ability to check diagrams to correct errors and use that information as a training opportunity / transfer of knowledge to foster a continuous improvement environment to further develop the skills of less experienced controls engineers, • Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver, • Self-starting instincts and strong analytical skills, • Excellent verbal and written communications skills, • Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor's degree in engineering – preferably EE, EET or CECS, or equivalent work experience, • 6+ years in the field or related area., • Experience Required:, • PLC programming, debugging and commissioning, • Plan/hardware design, • AutoCAD (AutoCAD E desired), • Microsoft Office Suite, • Basic knowledge of electrical equipment and local building codes such as UL508a, NEC and NFPA, • Experience Preferred:, • Hands-on mechanical and electrical capabilities, • Troubleshooting, • Material Handling specifically the Parcel and Warehouse & Distribution Industry, • Understanding VFDs, Servos, sensors and Vision Systems., • Legally authorized to work in the United States, • Ability to obtain facility security clearance as needed

Job DescriptionDescription: Come grow with us! It is an exciting time within our company as we expand the services offered to our customers. At ControlTouch Systems, our goal is to be “The BEST in Baggage”. We are seeking innovative-minded, qualified candidates to join our team as we continue to do just that! We design and support systems for airports that get baggage to passengers at destinations all over the world safely, accurately, and efficiently. Check out the job description below and apply today! JOB SUMMARY: Our Software Engineers help expand our company’s role in technology and are responsible for preparing or receiving detailed functional specification and flow diagrams to illustrate the sequence of steps that the program must follow; and describe input, output and logical operations involved. Each project is different, so this role is constantly challenged with new software configurations and applications. Once the software is developed and tested, our Software Engineers work closely with our Engineering team during the installation and may visit the customer site during the go-live phase to help debug and troubleshoot any issues that arise. The ideal candidate will not only be able to quickly learn from the software engineering team, but also be able to bring something new to the table. ESSENTIAL FUNCTIONS: • Direct, coordinate and exercise functional authority for design, planning, organization, of new software tools, solutions and products., • Write code that is?accurate, precise, and?thoroughly self-checked., • Research alternative algorithms and solutions from those previously deployed by the company and strive to be a leader in new technology for the team and overall organization., • Develop desktop applications and services in C++ and C# for the Windows operating system (both server and workstation editions)., • Research and implement new and existing application layer protocols (over TCP and UDP) in order to communicate to different programs, platforms, and hardware., • Write concurrent (multi-threaded) applications for multi-core processors., • Develop stored procedures for Microsoft SQL Server, and create reports using SSRS (SQL Server Reporting Services)., • Develop web applications in HTML and JavaScript (both with and without a framework)., • Provide project support to our controls engineers by training them in the use of our products and assisting them in tasks that are heavily software focused (database configuration, application scripting, miscellaneous programming, and overall testing)., • Configure 3D emulations of material handling systems, such as baggage handling systems for airports., • Participate in occasional project design and planning meetings., • Perform code-reviews for your coworkers, contribute to the design and enforcement of software standards, and openly share your knowledge and expertise with the rest of the team., • Combination of office and job site settings, • Collaborative, engaging and success driven culture The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Sitting for prolonged periods of time when in office, • Standing and walking for prolonged periods of time when at a jobsite, • Climbing may be required when working at a jobsite, • Repetitive typing/data entry This position offers a flexible work schedule. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements as needed. It is the policy of ControlTouch Systems to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, ?physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), ?or any other characteristic protected by federal, state or local law. In addition, ControlTouch Systems will provide reasonable accommodations for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Must possess expert programming skills and demonstrate professional-level fluency in an object-oriented programming language such as C++, C#, or Java., • Must have a solid understanding of how data structures and containers, like stacks, queues, strings, and dynamic arrays (vectors / collections) are implemented., • High-level of computer literacy and enjoy working in the software development and automation technology field., • Highly skilled developer who is eager to learn new software languages and has passion for software architecture and design; and researching, learning and using new technologies/programming languages (Technologies include WPF, WCF, ASPNET, JQueryz), • Willingness to travel to customer facilities to install, modify, troubleshoot and debug electrical wiring and system software as needed and work non-business hours based on project and customer needs., • Excellent verbal and written communications skills; attention to detail and good organizational skills, • Independent thinker and problem-solver, • Bachelor’s degree, or equivalent, in related area; years of relative experience will be considered for education., • 5+ years of relevant experience, • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed

Job DescriptionDescription: JOB SUMMARY: The Mechanical Designer will be responsible for creating mechanical engineering drawings and designs specific to the parcel industry. The Mechanical Designer works under the day-to-day direction of the Principal Engineer and interfaces with other engineering staff to ensure designs are functional, efficient and safe. ESSENTIAL FUNCTIONS: · Produce mechanical installation drawings for parcel handling projects. · Collaborate with project teams to ensure consistent design practices. · Prepare AutoCAD drawing sets for permits, installation, and as-built conditions · Other responsibilities as needed. WORK ENVIRONMENT: · Office environment PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: · High productivity in office · Sitting for prolonged periods of time · Repetitive typing/data entry WORK SCHEDULE: This position works in office. General office hours are M-F, 8a-5p with varied hours as needed to support project deadlines. It is the policy of Sortation Labs, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, ?physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), ?or any other characteristic protected by federal, state or local law. In addition, Sortation Labs, LLC will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: · Proficiency in AutoCAD · Proficiency in Microsoft · Ability to follow direction · Ability to produce high quality drawing sets · Detail-oriented and organized; and capable of performing work that is consistent, and accurate EDUCATION, EXPERIENCE AND QUALIFICATIONS: · 0-2 years’ experience in a mechanical designer role · Associate degree or certification in computer-aided design and drafting · AutoCAD Proficient (2D and 3D CAD design software) · MS Office (Proficient in Excel) · Legally authorized to work in the United States

Job Description About the Role Our client is seeking a Production Systems Engineer responsible for the design, integration, and optimization of manufacturing systems and processes. This role ensures seamless operation across equipment, people, materials, and technology to drive efficiency, quality, and scalability. The engineer plays a key role in implementing lean principles, data-driven decision-making, and smart manufacturing initiatives. What You’ll Do • Design and improve end-to-end production systems, including material flow, layout, and process integration., • Analyze production performance data to identify system inefficiencies, bottlenecks, and improvement opportunities., • Lead the implementation of lean manufacturing principles, standard work, and continuous improvement projects., • Support factory automation and smart manufacturing technologies, including data collection and system monitoring tools., • Collaborate with cross-functional teams (Engineering, IT, Maintenance, Quality, Production) to ensure seamless integration of new systems and process changes., • Participate in new product introduction (NPI) and ensure production systems are ready for scale-up., • Develop metrics and dashboards to track system performance (OEE, throughput, takt time, etc.)., • Optimize ERP/MES interface with production systems to ensure accurate scheduling, traceability, and reporting., • Ensure all systems comply with safety, environmental, and quality standards. What You’ll Bring • Bachelor’s degree in Industrial Engineering, Manufacturing Engineering, Systems Engineering, or a related field., • 3+ years of experience in manufacturing systems, operations engineering, or production process improvement., • Strong knowledge of production workflows, value stream mapping, and system-level thinking., • Proficiency in data analysis tools (Excel, SQL, Power BI) and simulation/modeling software (e.g., Arena, FlexSim)., • Familiarity with MES, ERP, and manufacturing automation systems., • Experience leading cross-functional projects and driving change in production environments., • Excellent problem-solving, communication, and organizational skills., • Lean Six Sigma certification (Green or Black Belt)., • Experience with Industry 4.0 technologies (IoT, digital twins, predictive maintenance)., • Background in discrete manufacturing or high-mix/low-volume production environments., • Experience in plant layout and systems integration for new or expanding facilities. Working Environment and Physical Demands • Willing and able to frequently move materials and equipment weighing up to 50 pounds., • Must be able to remain in a stationary position for 50% of the time., • Must be able to move about inside and outside of equipment, warehouse, and office space and position oneself to work on the equipment., • Will frequently operate hand and power tools, computers, and other office equipment., • Occasionally ascend/descend a ladder to access high places on the equipment., • Valid driver’s license and clean driving record., • Ability to travel by vehicle or airplane, domestically. What We Offer The salary range for this role is $93,500–$105,400 USD; however, our client considers several factors when determining compensation when extending a job offer, including but not limited to the role being offered, associated responsibilities, the candidate's prior work experience, education/training, and any special skills. If this role excites you but you don’t meet every requirement listed, we encourage you to apply anyway. Our client welcomes applicants of all backgrounds and experiences and understands that the best candidates may come from the most unlikely of places. “LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.” Company DescriptionLEAD is an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.LEAD is an Equal Opportunity and Affirmative Action Employer. \r\nLEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.

Job DescriptionSalary: Purpose TheProject Engineeris a key team member whose primary responsibility is to support the construction activities of the project management team by processing information and controlling all aspects of the project administration. The Project Engineer will support the group by means of organizing and maintaining data records, establishing clear lines of communication between customers, operations, and staff. Job Responsibilities • Onboarding new jobs: assist in project startup including permitting, electronic file setup, budget preparation and submittal, coordination of the superintendent on-site needs, job site compliance, data entry, and communication with clients as needed., • Bid process: assist with bid preparation under the guidance of the Project Manager, prepare and update pre-qualification applications, maintain bid list and track process., • Subcontracts: Data entry and job costing, initiate approval of monthly applications for payment, change orders, compliance management, and manage ongoing subcontractor correspondence., • Purchasing:assist Project Manager in procurement and data entry for job costing., • Billing: assist Project Manager in coding pay estimates., • Project plans and submittals: maintenance of electronic files, tracking, distribution, and correspondence., • Project administration: assist Project Manager with change orders, routing, and tracking. Maintain communication with project lead to ensure all necessary job file and documents are complete. Set up inspectors when needed., • Job closeout: assists Project Management team in all project close-out activities., • Other duties as assigned. Education and Experience • 1-3 years of administration, accounting, or engineering experience. Experience working on large scale construction projects in similar role is preferred., • Bachelors in Business Administration, Civil Engineering, Construction Management or equivalent from accredited undergraduate institution preferred., • Demonstrated experience in billing, document control, and purchasing., • Commitment to maintaining data accuracy and timeliness in processing and deliver., • Working knowledge of all office practices and software. An Equal Opportunity Employer At LPX Group and our subsidiary companies (Bluegrass Testing, Bluegrass Blasting,Louisville Paving and Construction, Material Transfer and Pace Contracting), we take pride in being an Equal Opportunity Employer and, as such, we do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment, development and promotion opportunities are decided on the basis of qualifications, merit and business need.

Job DescriptionOverview We are seeking a motivated and enthusiastic Entry Level Electrical Engineer to join our dynamic team in Louisville, KY. This is an exciting opportunity for recent graduates or those with limited experience to kick-start their career in electrical engineering. NEC Code- Required AutoCad- Required Reading Technical Drawings- Required This is a first shift opportunity and allows you to get your foot in the door with a well established company. After 6 months a significant raise is given. More details will be given throughout the interview process. You will work alongside experienced professionals, gaining hands-on experience and contributing to innovative projects that make a difference. Responsibilities • Assist in the design and development of electrical systems and components., • Conduct testing and analysis of electrical systems to ensure functionality and compliance with standards., • Collaborate with senior engineers on project specifications and requirements., • Support troubleshooting and problem-solving efforts for electrical issues., • Prepare technical documentation, including reports and design specifications., • Participate in team meetings and contribute ideas for process improvements., • Stay current with industry trends and advancements in electrical engineering.Qualifications, • Bachelor's degree in Electrical Engineering or a related field., • Strong understanding of electrical principles and circuit design., • Familiarity with engineering software and tools (e.g., AutoCAD, MATLAB, PSpice)., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment., • Strong communication skills, both verbal and written., • Electrical Schematics, • Electrical Troubleshooting Skills, • Troubleshooting Skills, • CAD Software, • Electrical Troubleshooting, • Electrical Repair, • Electrical / Electronic Systems $35 - $40 / hr

Job Description Mission Speechify is the easiest way to listen to the world's information. Articles on the web, documents in the cloud, books on your phone. We absorb it all and let you listen to it at your desk, on the go, at your own speed, and with tools that make learning easier, deeper, and faster. What streaming services have done for audio entertainment, we're doing for audio information. And whatever we're doing seems to be working. We're #1 in our category, and experiencing exponential growth. Overview We're looking for a Senior Software Engineer to join our Core Experiences Team. This team builds and maintains the foundational services and SDKs that power Speechify's product experience across platforms. It's a critical role for someone who enjoys working at the intersection of product and infrastructure, thinks strategically, and is passionate about designing clear, reliable APIs and simple systems that directly enhance the user experience. What You'll Do • Collaborate with Speechify's Product Teams to scope projects, find ways to reduce scope to get faster feedback from customers, navigate the integration/UX tradeoffs relevant to different product teams, and deliver solutions via our cross-platform SDK, • Optimize existing functionality to ship things like faster loading and more intelligent parsing by designing more efficient abstractions and improving our algorithms, • Systems thinking. You know that optimizing a system requires end-to-end design, and you believe simplicity is valuable., • Speed. You work quickly to generate ideas and options and know how to decide which things can ship now and what things need time, • Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down, • Collaboration. You know how to inspire, play, and negotiate with opinionated designers, marketers, and PMs, • Preferred Tech Stack:, • Kotlin Multiplatform (Java experience is OK but role is Kotlin Multiplatform), • A fast-growing environment where you can help shape the company and product., • An entrepreneurial-minded team that supports risk, intuition, and hustle., • A hands-off management approach so you can focus and do your best work., • An opportunity to make a big impact in a transformative industry., • Competitive salaries, a friendly and laid-back atmosphere, and a commitment to building a great asynchronous culture., • Opportunity to work on a life-changing product that millions of people use., • Build products that directly impact and support people with learning differences like dyslexia, ADD, low vision, concussions, autism, and more. Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job DescriptionDescription: Be part of a growing team! qubeworX is currently seeking an experienced Panel Tech to join our growing team. As a Panel Tech II you are responsible for the assembly of Electrical Control Panels. This role focuses on interpreting control panel layouts and electrical drawings. The Technician will be responsible for the layout and physical mounting of components to the back panel, wiring of all components, installation of control panel into an enclosure under limited supervision. All duties must be performed in accordance with all company policies and procedures. ESSENTIAL FUNCTIONS: • Provide knowledge of layout design and wiring to junior panel builders, communicate effectively, (written and verbally), with peers., • Maintain red line drawing mark-ups of changes required during fabrication., • Communicate red line changes to Team Leader/supervisor for revision prior to completion., • Read drawings to establish correct wiring/cable runs., • Run wires point to point from component to component and to termination., • Perform wire labeling at connection points., • Successfully terminate various types of copper connectors., • Choose the correct tool or methodology for specific wiring tasks., • Use provided drawings to layout wireways/din rail and components on back panels and enclosures., • Route and bundle wires neatly to meet company and UL standards., • Perform point to point wiring of, including but not limited to, relays, controls, PLCs, I/O Modules, VFDs, Interfaces, electrical components, & Instrumentation., • Understanding of electrical circuitry including: power distribution, motor controls, AC/DC high voltage, AC/DC low voltage, relay logic and emergency stops., • Understanding of wiring and operation of electrical components including: PLCs, VFDs, transformers, power supplies, safety relays, control relays, pilot devices, pushbutton/selector switches, circuit breakers, fuses, phase monitors, contactors and overload relays., • Other responsibilities as needed., • Follow all Company Safety Standards and wear applicable PPE WORK ENVIRONMENT: This work is performed in a panel shop facility which may or may not be climate controlled depending upon the work location. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to: o Lift up to 30 pounds frequently, and up to 70 pounds occasionally o Standing for long periods of time, o Frequent bending, twisting, kneeling, o Climbing ladders as needed It is the policy of qubeworX, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, qubeworX, LLC will provide reasonable accommodations for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Ability to read drawings to establish correct wiring/cable runs., • Good written and verbal communication skills, • Working knowledge of Computer software to include but not limited to: Microsoft Office Suite, and more ? Two-year Electrical Engineer (EE) technical degree, military equivalent or equivalent related experience preferred and, ? 2-3 years hands-on experience in panel production preferred. ? Legally authorized to work in the United States.

Job DescriptionDescription: Come grow with us! qubeworX is a professional UL508A certified panel fabrication and wiring facility. Our in-house automated technology, concept to delivery thinking, and logistics implementation make us a leader in the industrial control fabrication field. We are currently seeking Panel Techs of all levels to join our team. Check out the job description below and apply today! JOB TITLE: Panel Tech III REPORTS TO: Panel Shop Supervisor JOB STATUS: Full Time FLSA STATUS: Non-Exempt DATE: June 29, 2023 JOB SUMMARY: The Panel Tech IIII is responsible for the assembly of Electrical Control Panels. This role focuses on interpreting control panel layouts and electrical drawings. The Technician will be responsible for the layout and physical mounting of components to the back panel, wiring of all components, installation of control panel into an enclosure while primarily working independently with minimal supervision. All duties must be performed in accordance with all company policies and procedures. ESSENTIAL FUNCTIONS: • Provide knowledge of layout design and wiring to junior panel builders, communicate effectively, (written and verbally), with peers., • Maintain red line drawing mark-ups of changes required during fabrication., • Communicate red line changes to Team Leader/supervisor for revision prior to completion., • Read drawings to establish correct wiring/cable runs., • Run wires point to point from component to component and to termination., • Perform wire labeling at connection points., • Successfully terminate various types of copper connectors., • Choose the correct tool or methodology for specific wiring tasks., • Use provided drawings to layout wireways/din rail and components on back panels and enclosures., • Route and bundle wires neatly to meet company and UL standards., • Perform point to point wiring of, including but not limited to, relays, controls, PLCs, I/O Modules, VFDs, Interfaces, electrical components, & Instrumentation., • Understanding of electrical circuitry including: power distribution, motor controls, AC/DC high voltage, AC/DC low voltage, relay logic and emergency stops., • Understanding of wiring and operation of electrical components including: PLCs, VFDs, transformers, power supplies, safety relays, control relays, pilot devices, pushbutton/selector switches, circuit breakers, fuses, phase monitors, contactors and overload relays., • Assume collateral duties such as maintaining Consumable inventory., • Other responsibilities as needed. This work is performed in a panel shop facility which may or may not be climate controlled depending upon the work location. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to:, • Lift up to 30 pounds frequently, and up to 70 pounds occasionally, • Standing for long periods of time,, • Frequent bending, twisting, kneeling,, • Demonstrate an expert knowledge of blueprint, wiring diagram, and schematic reading competency, • Good written and verbal communication skills, • Working knowledge of Computer software to include but not limited to: Microsoft Office Suite, and more, • Highly proficient in troubleshooting electrical and mechanical systems., • Experience with:, • Multi-meter – resistance, current and voltage testing, • Hand and power tools including but not limited to: drills, jig saws, wireway/din rail cutters, grinders, knockout punches, band saws, and more., • Two-year Electrical Engineer (EE) technical degree, military equivalent or equivalent years of related experience preferred and,, • 3 – 5 years hands-on experience in panel production preferred, • Legally authorized to work in the United States.

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. Overview With the growth of our iOS app, being the #18 productivity app in the App Store category and also our recent recognition as Apple's 2025 Design Award for inclusivity, we find the need for a Senior iOS Engineer to help us support the new user base as well as work on new and exciting projects to push our missing forward. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do • Opportunity to lead key engineering and product decisions, • Actively shipping production code for the Speechify iOS app, • Work within a dedicated product team, • Participate in product discussions to shape the product roadmap, • Experience. You've worked on products that scaled to a large user base, • Track record. You have worked on various products from inception to decent traction. You have been responsible for engineering the product, • Customer obsession. We expect every team member whose responsibilities directly impact customers to be constantly obsessed about providing the best possible experience, • Product thinking. You make thoughtful decisions about the evolution of your product and support internal teams and designers into taking the right direction, • Speed. You work quickly to generate ideas and know how to decide which things can ship now and what things need time, • Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down, • Swift Programming Language, • SwiftUI experience, • Experience in Multithreading Programming, • Working with CI/CD infrastructure, • Experience with Fastlane, • SOLID principles, the ability to write every single class according to SOLID, • A fast-growing environment where you can help shape the company and product, • An entrepreneurial crew that supports risk, intuition, and hustle, • The opportunity to make a big impact in a transformative industry, • A competitive salary, a collegiate atmosphere, and a commitment to building a great asynchronous culture, • Work on a product that millions of people use and where daily feedback includes users sharing that they cried when they first found the product because it was so impactful on their lives, • Support people with learning differences like Dyslexia, ADD, Low Vision, Concussions, Autism, and Second Language Learners, and give reading superpowers to professionals all over the world Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job DescriptionDescription: JOB TITLE: Controls Engineer Co-Op REPORTS TO: Engineering Manager JOB STATUS: Full Time FLSA STATUS: Non-Exempt JOB SUMMARY: The Controls Engineer Co-Op is responsible for assisting in the support of all phases of a controls project to include assistance in concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working under an experienced engineer and an established set of guidelines. ESSENTIAL FUNCTIONS: • Able to use computer software for design engineering and PLC and HMI programming., • Capable of basic trouble shooting of a system and communicate status – verbally and written., • Assist and support the process for designing and delivering successful control., • Support in designing and developing layouts for electrical circuits or systems for power and control distribution., • Assist in the production of detailed schematics., • Support the Systems Checklist for projects during field installation and startup., • Assist with Systems documentation and manual creation, • Assist in the development of electrical diagrams., • Be a valuable contributor to project teams., • Communicate with other team members effectively, • Office setting and field locations., • Collaborative, engaging and success driven culture, • Sitting for prolonged periods of time, • Repetitive typing/data entry It is the policy of ControlTouch Systems to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, ?physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), ?or any other characteristic protected by federal, state or local law. In addition, ControlTouch Systems will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Has knowledge of commonly used concepts, practices, and procedures with controls, • Basic programming and design knowledge, • Basic CAD knowledge, • Basic knowledge of MS Office Suite, • Demonstrate effective organizational skills and multi-tasking abilities, have an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver, • Self-starting instincts and strong analytical skills, • Excellent verbal and written communications skills, • Must be actively pursuing a Bachelor's or Master’s degree in engineering – preferably EE, EET or CECS from and accredited university/college., • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed

Job DescriptionDescription: The Manufacturing Engineer is responsible for developing, improving, and maintaining manufacturing processes to ensure efficient production, quality, and safety. This role focuses on optimizing workflows, implementing lean manufacturing techniques, and supporting product design for manufacturability. The ideal candidate will work closely with cross-functional teams, including production, quality, design, and maintenance. Requirements: Role and Responsibilities • Design, implement, and improve manufacturing processes, equipment, and systems., • Evaluate and improve production efficiency, safety, and product quality., • Develop and maintain process documentation, work instructions, and standard operating procedures., • Lead and support continuous improvement initiatives (e.g., Lean, Six Sigma, Kaizen)., • Analyze production data to identify trends, bottlenecks, and opportunities for improvement., • Participate in new product development by contributing to Design for Manufacturability (DFM) and process planning., • Specify and procure new manufacturing equipment or tooling as needed., • Train production staff in new processes, equipment, and best practices., • Ensure compliance with health, safety, and environmental regulations., • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related field., • 2–5 years of experience in a manufacturing or production engineering role., • Knowledge of manufacturing processes such as machining, assembly, metal stamping, welding, or automation., • Experience with CAD software (e.g., SolidWorks, AutoCAD) and ERP/MRP systems., • Familiarity with Lean Manufacturing and Six Sigma principles., • Strong analytical and problem-solving skills., • Six Sigma Green or Black Belt certification., • Metal Stamping Experience, • Project management experience or certification (e.g., PMP).

Job Description Are you a talented Sr. Automation Engineer with at least 5 years of PLC programming and systems integration experience? This is an onsite/hybrid position so there is flexibility to work from home a couple of days a week as project schedules allow. Why would you want to work here? • This position is only open due to a promotion!, • The company is strong and growing, building a new office and shop!, • Great team of professionals with a laid back atmosphere., • Great benefits, no monthly health insurance premium for employee or family!, • Exciting projects from start to finish, including the design of equipment., • Company is invested in a work life balance that works for employees!, • US based, US built, supplying equipment to the US and globally. Requirements: • BS in Engineering is preferred but an AS in engineering will be considered., • Must have at least 5 years of experience designing and programming control systems, • Must have systems integration experience., • Control System programming experience including PLCs, VFDs, PID loops, etc., • HMI programming and design experience, • Network/communication design experience, • Ability to specify electrical components of a control system, • Experience with Microsoft products, • AutoCAD Electrical Experience, • Experience with Rockwell Software (Studio 5000, FactoryTalk, etc.) is required., • Experience with Ignition Software is preferred., • Experience with Wonderware Software is preferred., • Experience with AutoCAD Electrical Software is required., • Experience with food & Beverage Industries is preferred. #ZR

Job DescriptionOverview We are seeking a talented and motivated Electrical Engineer to join our dynamic team in Louisville, KY. In this role, you will have the opportunity to work on innovative projects that make a real impact. Must be proficient with AutoCad and Drawings. You will recieve more information throughout the interview process! If you have a passion for electrical systems and enjoy collaborating with others to solve complex problems, we want to hear from you. Responsibilities • Design, develop, and test electrical systems and components., • Collaborate with cross-functional teams to ensure project success., • Conduct feasibility studies and perform risk assessments on new designs., • Prepare technical documentation, including specifications and reports., • Provide support during the installation and commissioning of electrical systems., • Troubleshoot and resolve electrical issues in a timely manner., • Stay updated on industry trends and advancements in electrical engineering.Qualifications, • Bachelor's degree in Electrical Engineering or a related field., • Proven experience in electrical design and system analysis., • Strong understanding of electrical codes and safety standards., • Proficiency in CAD software and simulation tools., • Excellent problem-solving skills and attention to detail., • Effective communication and teamwork abilities., • Professional Engineer (PE) License, • Electrical Schematics, • Electrical Troubleshooting Skills, • Electrical Systems Diagnostics & Repair, • CAD Software, • Electrical Installation, • Electrical Repair, • Electrical / Electronic Systems, • CAD Software (AutoCAD, Solidworks) $47 - $52 / hr

Job DescriptionDescription: JOB TITLE: Mechanical Principal Engineer REPORTS TO: Director, Mechanical Engineering JOB STATUS: Full Time FLSA STATUS: Exempt JOB SUMMARY: The Mechanical Principal Engineer will play a critical role in the specification knowledge, training, onboarding, decision making, workflow development, and general upkeep of the mechanical engineering department. You will collaborate successfully with stakeholders including project managers, project engineers, engineering designers and design engineers, other engineering disciplines, procurement, and field service, as well as heavily with the customer, to ensure that our department decisions align with customer requirements, field services needs, industry standards, and company best practices. Our Mechanical Principal Engineer would be responsible for being a main point of contact for the company for a customer in mechanical engineering. You would understand baggage handling systems fully, comprehend customer specifications and be able to influence future specification changes, and create standards for both ways of working and internal specifications. You will advise project engineers, designers, and other engineering disciplines on a consistent, quality-driven, and efficient way to work. ESSENTIAL FUNCTIONS: • Design and review internal process documentation, templates, work instructions, SOPs, and other ways of working., • Dictate internal standards, focusing on standardization., • Develop internal tools and calculation sheets for use by the organization., • Lead and guide project engineers and designers on an advisory basis, focusing on consistency, adherence to customer specifications and requirements, and high-quality output., • Understand baggage handling systems fully and make system level design decisions based on your knowledge., • Perform and develop complex engineering calculations, such as horsepower calculations and speeds, and understand the mechanics behind the calculations., • Collaborate with internal stakeholders, such as project management, procurement, field services, and other engineering disciplines to ensure mechanical engineering is aligned fully with the organization., • Represent the company appropriately during collaborative participation with customers and consultants., • Work together with vendors to ensure adherence of design and quality, as well as active participation in product design to meet customer needs., • Identify potential issues, provide efficient solutions, and make decisions when required., • Create and maintain equipment Manifests and other engineering documentation., • Review detailed field installation drawings containing detail for customer approval and field installation ease, and assist with dictating internal standards for drawings., • Office primarily, with occasional field visits. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • High productivity in office., • Sitting for prolonged periods of time., • Repetitive typing/data entry. This position works in office. General office hours are M-F, 7a-4p or 8a-5p. Working hours may vary to meet project requirements. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Excellent leadership and delegation skills., • Ability to read and understand customer specifications, engineering drawings, Bills of Material, and equipment Manifests., • Ability to understand complex engineering calculations., • Detail oriented, organized, and quality driven., • Ability to multi-task and change focus rapidly., • Critical thinker and problem-solver., • Self-starting instincts and motivation to work independently., • Excellent verbal and written communication skills. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor’s degree, or equivalent in years of experience., • 7+ years’ experience in conveyance., • Knowledge of conveyor systems, specifically baggage handling, is required., • Proficiency in CAD Software (AutoCAD, Inventor, or similar)., • Experienced use of Microsoft Office (Excel, Outlook, Project), • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed.

Job DescriptionDescription: C&I Engineering is looking for a talented and driven individual to join our team! About the opportunity: Senior Power Engineer We are currently seeking a full-time Senior Power Engineer in our Louisville, KY office to help us achieve our company mission. This person will be part of the Electrical Engineering team, which is responsible for developing designs for electrical/power systems and performing a variety of computer-based modeling, design, engineering, and planning tasks on projects. C&I is a full-service engineering design firm providing engineering/design/project management, and procurement services to various clients in oil & gas, food & beverage, and distilled spirits. Responsibilities include: • The Senior Power Engineer is responsible for designing electrical equipment for oil & gas, petrochemical, and other related facilities., • Design industrial power distribution systems, including equipment specifications, protection schemes, load analysis, fault, and coordination studies., • Performs electrical engineering calculations, including load studies, voltage drop calculations, wire and conduit sizing, and motor sizing., • Bachelor's degree or higher from an ABET-accredited engineering program with a minimum of 6 years of related work experience, or a bachelor's degree or higher from an ABET-accredited engineering technology program with 8 years of relevant experience., • Ability to travel domestically or internationally to client locations, vendor shops, and project sites. Travel may be up to 10%., • Must comply with drug-free workplace requirements., • Must be able to obtain a Transportation Worker Identification Credential (TWIC) and pass any required background checks., • Performs work in a safe manner in accordance with C&I and client requirements., • Must be able to meet the physical demands of the job, which could include exposure to the weather, heights, small spaces, noise, etc., while working on job sites., • Professional Engineer License, • Industry work experience, • Leadership experience, • Employee Owned, • ESOP, • 401k, • Health Insurance, • Dental & Vision, • Optional 4-day Work Weeks, • People: Building our company on diversity, development, and experience, • Quality: Doing the right things right, • Ownership: Holding ourselves and our teams accountable for results, • Service: Understanding our partnership and providing valued solutions Meet most but not all requirements? At C&I, we are dedicated to fostering a diverse and inclusive community that celebrates dedication and passion as much as past experience. If you are excited about this role and joining our team, we encourage you to still apply! You could be the perfect fit for this (or another) role. C&I is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, physical or mental disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Requirements:

Job Description Overview: We seek a qualified Mechanical Engineer to assist in designing custom automation equipment tailored to our clients’ needs. The ideal candidate will be capable of conducting clean slate industrial design independently or as part of a collaborative team. Our systems cater to various industries and integrate various technologies, providing a dynamic and challenging work environment. Responsibilities: • Utilize SolidWorks software to create CAD models for mechanical components and assemblies per Jewett Automation’s design standards., • Research and specify commercially off-the-shelf components for use in automation system designs, • Collaborate with project team members to strategically execute project scope., • Develop and, • Assist Sales and Applications departments to accurately estimate the material costs and labor for proposed equipment., • Create detailed manufacturing drawings with accurate dimensions and tolerances., • Select appropriate materials for machined and fabricated components., • Assist Operations with the manufacture of Engineered systems., • Troubleshoot automation systems during the debug phase of projects., • Perform finite element analyses as required., • Collaborate with Electrical and Controls Engineers to ensure machine designs meet requirements., • Provide technical support to the Service department and customers., • Create documentation for piping and instrumentation diagrams (P&ID) for projects., • Document as-built conditions., • Develop machine documentation., • Perform all assigned tasks within a predefined amount of time, while following quality limits and safety practices., • Conduct quality control checks to ensure products align with company and client standards., • Participate in scheduled departmental and project meetings., • Collaborate with colleagues to create cohesive and effective products., • Strong understanding of standard machine elements (bearings, gearboxes, timing belts, mechanical indexers, etc.)., • Willingness to travel occasionally., • Years of relevant work experience can substitute for a degree or certificate. A bachelor’s degree in engineering is preferred but not required., • 5+ Years of experience in machine design. Automation machinery preferred., • Strong command of SolidWorks 3D CAD software., • Experience with 3D printing manufacturing methods., • Working knowledge of geometric dimensioning and tolerancing (GD&T)., • Familiarity with manufacturing methods for mechanical components and fabrications., • Working knowledge of standard power tools and mechanical hand tools., • Ability to read electrical and mechanical prints and schematics., • Ability to work in a fast-paced, multi-tasking, cross-functional environment., • Ability to adhere to safety standards., • Strong math abilities., • Written and oral communication skills., • Ability to utilize basic computer applications such as email, Teams, and Windows. Benefits: • 401(k), • 401(k) matching, • Employee Assistance Program, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Ability to lift at least 50-75 lbs., • Ability to stand and/or sit a minimum of four hours at a time., • Ability to use hands and arms to finger, handle, reach, and feel., • Ability to work on a computer as needed., • Ability to maneuver around a shop environment and work on complex machines, including but not limited to, climbing and working from ladders and lifts., • Ability to travel approximately one week at a time throughout the year., • Willingness to wear PPE for the work environment.

Job Description Cornerstone Engineering, Inc. is an award-winning and fast-growing AEC firm that values commitment, excellence, and integrity. We have built our reputation by delivering successful projects to a broad array of clients in the public and private sectors, including with local and federal government. Cornerstone Engineering is seeking an experienced Senior Structural Engineer to join our dynamic engineering consulting team. As a Senior Structural Engineer, you will serve as a technical expert, working closely with our team to provide innovative solutions to our clients' engineering challenges. You will have the opportunity to interact with clients, contribute to business development efforts, and mentor junior staff. Responsibilities: • Serve as the lead engineer on projects, providing technical expertise and guidance to the project team., • Work closely with clients to understand their needs and develop creative solutions that meet their requirements., • Review and approve engineering designs, drawings, and specifications to ensure compliance with applicable codes and standards., • Provide mentorship and guidance to junior staff, helping them to develop their technical and professional skills., • Contribute to business development efforts, including proposal writing and client presentations. Requirements: • Bachelor's or Master's degree in Civil Engineering, Structural Engineering or a related field., • Minimum of 10 years of experience in structural engineering., • Professional Engineer (PE) license required., • Experience with design of various types of structures including, but not limited to, steel, concrete, masonry, and wood., • Knowledge of industry standards and codes, including ASCE 7, ACI, AISC, and IBC., • Excellent communication and interpersonal skills., • Ability to work independently and collaboratively in a team environment., • Strong project management skills. Required Skills and Abilities: • Excellent verbal and written communication skills. Able to communicate well using both technical and non-technical language and read with comprehension., • Conscientious and detailed., • Problem-solving skills., • Strong computer skills with basic knowledge of drafting software, BIM modeling software, and structural-based design software (AutoCAD, Revit, RISA, EnerCalc, etc.)., • Ability to work in a team environment, as well as individually with minimal supervision., • Familiar with construction and safety practices and willing to go on site., • Teachable and eager to develop professionally. Corporate Culture: At Cornerstone Engineering, we believe in a collaborative approach that is founded on the principles of Commitment, Excellence, and Integrity to our clients and our team members: Commitment to Staff and Clients • Treat others with respect, • Set and work toward common goals, • Communicate clearly and effectively to avoid misunderstandings Excellence in Performance and Production • Provide value-added benefits, • Exceed client expectations, • Deliver services and products on time and budget Integrity in Behavior • Deal with clients and associates fairly, • Practice honesty in all endeavors, • Focus on a servant attitude The successful candidate will become an integral member of a team focused on living these principles daily. We look forward to welcoming the right member to our growing team.

Job DescriptionDescription: Come grow with us! It is an exciting time within our company as we expand the services offered to our customers. At ControlTouch Systems, our goal is to be “The BEST in Baggage”. We are seeking innovative-minded, qualified candidates to join our team as we continue to do just that! We design and support systems for airports that get baggage to passengers at destinations all over the world safely, accurately, and efficiently. Check out the job description below and apply today! JOB SUMMARY: The Controls Engineer II is responsible for the advanced support of all phases of a controls project to include concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working with minimal supervison. A successful Controls Engineer II has an advanced level of knowledge and understanding of commonly used controls engineering concepts, PLC programming and practices with an ability to lead/mentor entry level Controls Engineers as well as a willingness to attend training to further build their knowledge and abilities to advance to the next level. ESSENTIAL FUNCTIONS: • Understand AC/DC control systems with the ability to read component cut sheets., • Able to use computer software for design engineering and PLC programing., • Capable of trouble shooting a system and communicate status – verbally and written., • Assist and support the process for designing and delivering successful control., • Designing and developing layouts for electrical circuits or systems for power and control distribution., • Support the Systems Checklist for projects during field installation and startup., • Ability to develop electrical diagrams with varying levels of efficiency while being able to locate and correct mistakes found in electrical diagrams by themselves and others., • Ability to take the controls lead on project teams., • Capable of creating functional system test plans for use in field commissioning and ability to contribute written descriptions of system operations for technical documents., • Communicate with other team members effectively and keep Administrative Coordinator advised of schedule; checking and using voicemail and email diligently; and maintaining the team relationship., • Office setting and field locations., • Collaborative, engaging and success driven culture, • Sitting for prolonged periods of time, • Repetitive typing/data entry, • Lifting up to 50 pounds It is the policy of ControlTouch Systems to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, ?physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), ?or any other characteristic protected by federal, state or local law. In addition, ControlTouch Systems will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Advanced proficiency in several programming languages and control device networks for PLCs., • Ability to read and understand written specifications, as well as contract drawings and?be capable?of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, water and wastewater systems and manufacturing., • Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver, • Self-starting instincts and strong analytical skills, • Excellent verbal and written communications skills, • Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs., • Experience Required:, • PLC programming, debugging and commissioning, • Plan/hardware design, • AutoCAD (AutoCAD E desired), • Microsoft Office Suite, • Basic knowledge of electrical equipment and local building codes such as UL508a, NEC and NFPA, • Experience Preferred:, • Hands-on mechanical and electrical capabilities, • Troubleshooting, • Material Handling, • Bachelor's degree in engineering – preferably EE, EET or CECS, or equivalent work experience, • 3-5 years in the field or related area., • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed

Job Description JQOL is seeking a Structural Project Manager to lead the planning, coordination, and execution of structural engineering projects across a variety of markets, including commercial, institutional, and public infrastructure. This is a key leadership position for an experienced structural engineer with strong technical skills and a proven ability to manage projects, collaborate across disciplines, and build lasting client relationships. The ideal candidate will combine engineering expertise with excellent communication and organizational skills to deliver high-quality projects on time and within budget, while mentoring team members and supporting the firm's continued growth. Key Responsibilities • Manage structural engineering projects from conceptual design through construction completion, ensuring quality, budget, and schedule objectives are met., • Lead internal design teams and coordinate with architects, clients, contractors, and other consultants., • Perform and oversee structural analysis and design for buildings and structures using steel, concrete, masonry, and wood materials., • Prepare and review construction documents, technical specifications, and engineering reports., • Conduct site visits, perform field inspections, and provide construction phase support, including responding to RFIs and reviewing shop drawings., • Act as primary point of contact for clients, maintaining strong working relationships and ensuring client satisfaction throughout the project lifecycle., • Support proposal development and participate in interviews and presentations for new business opportunities., • Bachelor's degree in Civil or Structural Engineering required; Master's degree preferred., • Licensed Professional Engineer (PE) in Indiana and/or Kentucky; SE license preferred or the ability to obtain., • Minimum 6–10 years of experience in structural engineering, with at least 2–4 years managing projects., • Proficient in structural analysis and design software (e.g., RISA, RAM, ETABS, Revit)., • In-depth knowledge of IBC, ASCE 7, AISC, ACI, and TMS codes and standards., • Strong organizational skills with the ability to manage multiple projects and deadlines., • Effective verbal and written communication skills, including client-facing interactions and technical documentation. Position is available in our Indianapolis, IN office.

Job DescriptionDescription: JOB TITLE: Controls Engineer I REPORTS TO: Engineering Manager JOB STATUS: Full Time FLSA STATUS: Non-Exempt JOB SUMMARY: The Controls Engineer I is responsible for the support of all phases of a controls project to include assistance in concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working under an established set of guidelines. A successful Controls Engineer I has a proficient level of knowledge and understanding of commonly used controls engineering concepts, PLC programming and practices with a willingness to attend training to further build their knowledge and abilities to advance to the next level. ESSENTIAL FUNCTIONS: • Understand AC/DC control systems with the ability to read component cut sheets., • Able to use computer software for design engineering and PLC programing., • Capable of trouble shooting a system and communicate status – verbally and written., • Assist and support the process for designing and delivering successful control., • Support in designing and developing layouts for electrical circuits or systems for power and control distribution., • Assist in the production of detailed schematics., • Support the Systems Checklist for projects during field installation and startup., • Ability to develop electrical diagrams with varying levels of efficiency while being able to locate and correct mistakes found in electrical diagrams by themselves and others., • Be a valuable contributor to project teams., • Communicate with other team members effectively and keep Administrative Coordinator advised of schedule; checking and using voicemail and email diligently; and maintaining the team relationship., • Other responsibilities as needed. WORK ENVIRONMENT: • Office setting and field locations., • Collaborative, engaging and success driven culture, • Travel 50% or more PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Sitting for prolonged periods of time when in office, • Standing and walking for prolonged periods of time when at a jobsite, • Climbing may be required when working at a jobsite, • Repetitive typing/data entry It is the policy of Sortation Labs, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, Sortation Labs, LLC will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Develop proficiency in several programming languages and control device networks for PLCs., • Is willing to attend training and become certified in applicable controls technologies or programs., • Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, water and wastewater systems and manufacturing., • Demonstrate effective organizational skills and multi-tasking abilities, have an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver, • Self-starting instincts and strong analytical skills, • Excellent verbal and written communications skills, • Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor's degree in engineering – preferably EE, EET or CECS, or equivalent work experience, • 1-3 years in the field or related area., • Experience Required:, • PLC programming, debugging and commissioning, • Plan/hardware design, • AutoCAD (AutoCAD E desired), • Microsoft Office Suite, • Basic knowledge of electrical equipment and local building codes such as UL508a, NEC and NFPA, • Experience Preferred:, • Hands-on mechanical and electrical capabilities, • Troubleshooting, • Material Handling, • Understanding VFDs, Servos, sensors and Vision Systems., • Legally authorized to work in the United States, • Ability to obtain facility security clearance as needed

Job DescriptionDescription: Come grow with us! It is an exciting time within our company as we expand the services offered to our customers. At ControlTouch Systems, our goal is to be “The BEST in Baggage”. We are seeking innovative-minded, qualified candidates to join our team as we continue to do just that! We design and support systems for airports that get baggage to passengers at destinations all over the world safely, accurately, and efficiently. Check out the job description below and apply today! JOB TITLE: Controls Engineer III REPORTS TO: Engineering Manager JOB STATUS: Full Time FLSA STATUS: Exempt JOB SUMMARY: The Controls Engineer III is responsible for leading all phases of a controls project to include concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working independently. A successful Controls Engineer III has an expert level of knowledge and understanding of the full scope of controls engineering practices, theories, and PLC programming to implement the controls for a project from concept to completion. The Controls Engineer III serves as a subject matter expert and resource for their team and provides coaching and guidance while working at a job site or in-office collaboration. To keep their knowledge up-to-date, the Controls Engineer III will attend training in the latest controls technology and have the ability to share that knowledge with less experienced controls engineers as well as work collaboratively with the Engineering Manager to provide insight on the latest advancements in the field of controls engineering to implement new standards for the company. ESSENTIAL FUNCTIONS: • Expert understanding of AC/DC control systems., • Use of computer software for design engineering and PLC programing., • Capable of trouble shooting a system and communicate status – verbally and written., • Assist and support the process for designing and delivering successful control., • Designing and developing layouts for electrical circuits or systems for power and control distribution., • Develop/create electrical diagrams with expert level of efficiency., • Ability to locate and correct mistakes in electrical diagrams developed by others on the team and use this information as a training opportunity for others to foster the continuous improvement of their skills. (Transfer of knowledge), • Be the controls lead and manage other engineers on project teams., • Capable of creating functional system test plans for use in field commissioning and provide written descriptions of system operations for technical documents., • Communicate with other team members effectively and keep Administrative Coordinator advised of schedule; checking and using voicemail and email diligently; and maintaining the team relationship., • Office setting and field locations., • Collaborative, engaging and success driven culture, • Sitting for prolonged periods of time, • Repetitive typing/data entry, • Lifting up to 50 pounds, • Proficient in several programming languages and control device networks for PLCs with good aptitude for learning the programming for new/additional systems., • Ability to read and understand written specifications, as well as contract drawings and?be capable?of developing a complete design that meets these requirements within the electrical design standards and quotation presented for a project. Has knowledge of commonly used concepts, practices, and procedures with controls, material handling, water and wastewater systems and manufacturing., • Ability to check diagrams to correct errors and use that information as a training opportunity / transfer of knowledge to foster a continuous improvement environment to further develop the skills of less experienced controls engineers, • Demonstrates effective organizational skills and multi-tasking abilities, has an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver, • Self-starting instincts and strong analytical skills, • Excellent verbal and written communications skills, • Bachelor's degree in engineering – preferably EE, EET or CECS, or equivalent work experience, • 6+ years in the field or related area., • Experience Required:, • PLC programming, debugging and commissioning, • Plan/hardware design, • AutoCAD (AutoCAD E desired), • Microsoft Office Suite, • Basic knowledge of electrical equipment and local building codes such as UL508a, NEC and NFPA, • Experience Preferred:, • Hands-on mechanical and electrical capabilities, • Troubleshooting, • Material Handling specifically in the Baggage Handling Industry, • Understanding VFDs, Servos, sensors and Vision Systems., • Legally authorized to work in the United States

Job Description Join our team at TowerPinkster and open a new door to an amazing career! TowerPinkster, an architecture, engineering, and interior design firm based in Michigan, Indiana, and Kentucky, is looking for a talented Senior Mechanical Engineer. This position is responsible for building relationships and collaborating with clients at the planning level to determine solutions and develop a Mechanical System plan. In addition, this position is responsible for designing mechanical systems for projects from beginning design to completion of construction administration. Responsible for leading the design team through the development of contract documents of significant scale and/or complexity. Participate in new business development and marketing efforts. POSITION RESPONSIBILITIES + EXPECTATIONS CULTURE • Encourage positive communication among team members and across disciplines., • Create opportunities to enhance teamwork, create inclusion, and a positive work environment., • Strive to cultivate equity, respect, integrity, humor, and the celebration of talent.CLIENT, • Perform business development functions, including marketing, and networking to create personal connections and involvement in professional organizations., • Participate in the process of interviewing prospective new clients to understand their needs., • Collaborate with the client in planning design, determining solutions and scope of the project to develop a mechanical system plan to meet client needs., • Construct the scope of work and determine a budget., • Manage existing client relationships and develop relationships with future clients.PROJECT, • Lead the project team to create a Mechanical System design., • Oversee the production of all phases of construction documents, which include schematic documents, design documents, construction documents, bidding, and construction administration., • Conducted facility assessments, field assessments, and engineering studies, and performed commissioning work and site visits., • Create and write reports and presentations to clients., • Perform as Project Manager on mechanical-driven projects., • Lead and coordinate project efforts with other disciplines, clients, and construction partners to meet schedule milestones.MENTORSHIP, • Mentor team to share experiences, knowledge, skills, and lessons learned for continuous improvement., • Prepare and review “red lined” documents for Mechanical Designer and Mechanical Engineer growth and development., • Lead, teach, and guide other project team members to assist in their growth and development. LEADERSHIP, • Provide input on work priorities and project scheduling., • Conduct quality control reviews on various projects, • Serve as a mechanical subject matter expert to resolve project issues., • Provide input to department standards and procedures.POSITION QUALIFICATIONS, • A bachelor’s in mechanical engineering accredited program, • P.E./Professional Licensure required; State of Indiana or Kentucky preferred LEED AP and/or ASHRAE accreditation preferred., • Knowledge and experience in REVIT software, building load programs, engineering software systems, and energy modeling., • Extensive knowledge of standards and codes, • 10 years of professional experience, • Multiple systems-based experience, • Experience in multiple market sectors, including commercial, government, K-12 education, higher education, and healthcare., • Experience in Construction Administration, • Industry-leading compensation package, including paid overtime, performance bonuses, and profit sharing., • National award-winning culture and a supportive work environment that empowers employees to stay healthy, fulfill their interests and passions, and balance work and life goals., • Industry-leading compensation package, including paid overtime, performance bonuses, and profit sharing., • A collaborative work environment along with many culture connection events., • Flexible work hours with a Work-Life Balance program providing six additional days off per year, and a healthy Paid Time Off program., • A comprehensive benefits package including health, dental, vision, 401(k), life insurance, short term and long-term disability benefits,, • Paid community service hours., • Annual team training and professional development opportunities., • The opportunity to reach your career goals with an award-winning Firm. We highly encourage licensure, certification and professional organization memberships which are Firm paid. We strive to create a diverse, equitable, and inclusive culture that empowers each person to be their genuine self. We are committed to Diversity, Equity, and Inclusion. For more than 70 years, we have made significant contributions to our communities through our commitment to quality, sustainable, and equitable design. Our active DEI committee is focused on driving initiatives within three areas: people, purpose, and process. Our expertise and collaborative, client-centered approach means the best ideas rise to the top. TowerPinkster received the 2024 National 101 Best and Brightest Companies to Work for Award and the 2024 Best Firm Award from Zweig Group. We are proud of this achievement and are thankful for our client relationships, our generous communities, and all the employees who contribute to TowerPinkster’s exciting and creative culture! Our supportive work environment helps employees reach their career goals, and we have fun doing it! . We are an Equal Opportunity Employer Powered by JazzHR yqrQBOenS2

Job Description Desired Experience: • 5-15 plus years of experience as an electrical engineer (Federal Healthcare Preferred but not necessary), • PE license required in any US state (Federal Govt. required no specific license in a state worked in, only a single license in a single state regardless of location., • Project Management Experience desired., • Interfacing with clients (VA Medical Centers) to confirm project progress., • AutoCAD or Revit, • Windows software, • Read and interpret blueprints and as-built drawings., • Attend meetings and project confidence with clients Virtually & Sometimes on site., • Provide guidance and leadership to staff engineers as to the appropriate HVAC solutions on projects in various stages of design., • Review submittals (shop drawings, etc.) to determine conformance with contract documents., • Evaluate, select and apply standard engineering techniques, procedures, and criteria to perform assigned tasks., • Coordinate with other engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information., • Research and analyze customer design proposals specification, manuals, and other data to evaluate the feasibility, cost, and maintenance requirements of designs or applications., • Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications., • Research, design, and evaluate mechanical products, equipment, systems, and processes to meet requirements, apply knowledge of engineering principles., • Provide feedback to design engineers on customer problems and needs., • Proficient in editing federal health care specifications & ability to learn government specs.

Job Description Company: Wetland Studies and Solutions, Inc. Locations: Louisville, KY Additional Locations: n/a Work Site: Hybrid Req ID: 216646 Position Overview Wetland Studies and Solutions, Inc., a Davey company, is seeking a water resource engineer to join our stream and wetland restoration design group. You will be a part of a multi-disciplinary team that is at the forefront of developing and implementing innovative approaches to stream and wetland restoration. You will design and build projects that restore diverse, high-quality and resilient ecosystems. You will have the opportunity to work in an experienced team that has pioneered methods in field investigation, construction techniques, and the application of leading-edge technology to design, with a particular focus on 2D hydrodynamic modeling of flood events. Your restoration work will be conducted in a wide variety of environments, from confined, urban sites to the headwaters of the Appalachian Mountains, across the eastern United States. The new hire will work out of the Louisville, KY office of Wetland Studies and Solutions, Inc. Job Duties You will be involved in many parts of the restoration design process, including: • Collaborative design of stream and wetland restoration projects, • Fieldwork to assess sites and develop site specific restoration solutions, • 3D design in Autodesk Civil 3D, • Flood vulnerability assessment of restoration design using 2D hydrodynamic models, • Development of concept level, permit ready and constructible project drawings, • Creation and use of high-resolution topographic datasets, • Bachelor’s degree in civil/environmental/water resources or biological engineering, or closely related discipline, • Strong technical and quantitative skills related to water resources or environmental design, including a foundation in fluid mechanics and open channel flow, • Excellent verbal and written communication skills PREFERRED: • Engineer in Training (EIT) certification in any U.S. state or plan to obtain certification, • Experience in AutoCAD, AutoCAD Civil 3D, or related software used for landscape visualization and design, • Experience with hydrologic and/or hydraulic analysis, • Competitive compensation based on education and experience, • Excellent growth potential, • Professional training and continuing education, • Paid time off and paid holidays, • All job specific equipment and safety gear provided, • 401(k) retirement savings plan with a company match, • Employee-owned company and discounted stock purchase options, • Group Health Plan, • Employee Referral Bonus Program, • The Davey Tree Family Scholarship for children of employees, • Charitable matching gift program *All listed benefits available to eligible employees. Company Overview Invest in your future. Join one of the largest employee-owned companies in the nation! Davey has a unique culture that focuses on exchanging ideas, community partnership, a commitment to safety, and delivering unrivaled client service while acting as industry leaders in horticultural and environmental services. Divisional Overview The Davey Tree Expert Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to protected class, including race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national or ethnic origin, marital or familial status, disability, status as a protected veteran, status as an Aboriginal or Indigenous person, or other classification protected by law. Wetland Studies and Solutions, Inc., a Davey company, provides a full range of natural and cultural resource consulting services and is based in Gainesville, Virginia. The Davey Tree Expert Company provides research-driven tree services, grounds maintenance and environmental consulting for residential, utility, commercial and environmental partners in the U.S. and Canada. We care about our clients, each other and the world around us. We offer the resources, size and stability of a big company while maintaining the culture, entrepreneurial spirit and feel of a small one. We invest in our employees by offering industry-leading training, technology and benefits that lead to a rewarding and safe work experience at all levels. Wherever you want to grow your career, there’s a place for you at Davey. To learn more, visit Davey.com. Accommodations: If requested by employee or otherwise as required by law, reasonable accommodations will be made to enable employees with disabilities to perform essential job functions. If you need assistance at any time, please contact us at 1-877-411-7601 or at . Employment Type: Permanent Job Type: Full Time Travel Expectations: Up to 25%

Job Description Senior Civil Project Engineer JQOL is seeking a Senior Civil Project Engineer to support and lead civil engineering design efforts across Indiana and Kentucky. We are looking for a dynamic and driven professional to help shape the future of our growing company. This position offers the opportunity to lead multidisciplinary teams, oversee high-impact projects, and play a key role in client engagement and business development. The successful candidate will be responsible for the delivery and management of civil engineering projects from concept through construction, ensuring design excellence, financial performance, and client satisfaction. This is a leadership-track position for engineers with demonstrated experience managing both technical work and people. Key Responsibilities • Serve as project manager on complex civil/site development projects across multiple markets., • Lead and mentor project teams, including junior engineers and CAD designers, ensuring high-quality deliverables and efficient resource allocation., • Oversee project planning, scheduling, budgeting, and financial tracking to meet performance goals., • Maintain strong client relationships and support new business development efforts through proposals, presentations, and networking., • Provide technical oversight and guidance on engineering design, including grading, stormwater management, utilities, erosion control, and permitting., • Review plans, specifications, calculations, and technical reports to ensure compliance with applicable standards and regulations., • Bachelor's degree in Civil Engineering required; Master's degree a plus., • Minimum 8+ years of progressively responsible experience in civil/site design and project management., • Active Professional Engineer (PE) license in Indiana and/or Kentucky., • Proven leadership experience in managing staff, budgets, and client accounts., • Proficiency with AutoCAD Civil 3D and a strong desire to stay current with design tools and software trends., • Advanced understanding of permitting processes, agency coordination, and municipal design standards., • Strong written and verbal communication skills with the ability to lead meetings and present to clients or public entities. Position is open in either our Indianapolis, IN or Louisville, KY office.

Job DescriptionDescription: JOB TITLE: Mechanical Design Engineer REPORTS TO: Manager, Mechanical Engineering JOB STATUS: Full Time FLSA STATUS: Exempt JOB SUMMARY: The Mechanical Design Engineer will play a critical role in the conceptualization, design, and development of baggage handling systems and components. You will collaborate successfully with mostly engineering stakeholders including project engineers, principal engineers, and other engineering designers and design engineers to complete baggage handling projects successfully. You will focus on safe, high-quality output, on schedule and on budget. Our Mechanical Design Engineer would be responsible in part for modeling the systems (or portions of the systems), based on customer specifications and as-sold information. You would understand the system and provide input when a more efficient design would be better suited. You will help create comprehensive, detailed installation and component level drawing packages per customer specifications and field installation team requirements. ESSENTIAL FUNCTIONS: • Design custom baggage handling systems using CAD software (2D AutoCAD, 3D Inventor)., • Develop component level equipment, assembly, weldment, and part level models and detailed drawings for fabrication., • Perform engineering calculations, such as horsepower and speeds., • Collaborate in a team setting with other engineers, and occasionally with other business units, customers, or vendors., • Identify potential issues and provide efficient solutions., • Create and maintain Bills of Material (BOMs), Manifests, and other engineering documentation., • Create detailed field installation drawings containing detail for customer approval and field installation ease., • Ensure all designs comply with specifications and standards., • Participate in design review meetings with the project team. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • High productivity in office., • Sitting for prolonged periods of time., • Repetitive typing/data entry. This position works in office. General office hours are M-F, 7a-4p or 8a-5p. Working hours may vary to meet project requirements. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Ability to read and understand customer specifications, engineering drawings, Bills of Material, and equipment Manifests., • Detail oriented, organized, and quality driven., • Ability to multi-task and change focus rapidly., • Critical thinker and problem-solver., • Self-starting instincts and motivation to work independently., • Capable of handling stress in a fast-paced, deadline driven environment. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor’s degree, or equivalent in years of experience., • 3+ years’ experience in conveyance, construction, or other system-level engineering functions., • Knowledge of conveyor systems, specifically baggage handling, is a plus., • Proficiency in CAD Software (AutoCAD, Inventor, or similar)., • Experienced use of Microsoft Office (Excel, Outlook)., • Legally authorized to work in the United States., • Ability to obtain airport security clearance as needed.

Job DescriptionSalary: Who is Hagerman? Since 1908 The Hagerman Family has built trust and earned confidence as leaders in diverse markets of the construction industry. We are a construction solution provider. Location: Louisville, KY Job Summary: The Project Engineer Intern will support project teams in the planning, coordination, and execution of commercial construction projects. This role provides hands-on experience in both field and office settings, offering exposure to project management, scheduling, safety, and quality control. Interns will assist with project documentation, communication with subcontractors and suppliers, and job site visits while gaining practical knowledge of construction processes and career development in the industry. Key Responsibilities • Support Project Managers and Project Engineers with documentation such as RFIs, submittals, meeting minutes, and change orders., • Create, update, and maintain project logs, reports, and organized files., • Participate in job site walks to monitor progress, safety, and quality., • Collaborate with project teams, subcontractors, suppliers, and other stakeholders to ensure project alignment and success., • Help track and analyze project schedules, budgets, and logistics for materials, labor, and equipment., • Document and communicate project updates by recording meeting minutes and supporting team discussions., • Promote and monitor compliance with the companys Health and Safety Management Program., • Contribute to project close-out activities, including punch lists and securing warranties. Job Summary: The Construction Estimator Intern will work alongside our estimating team to support the preparation of accurate and competitive bids for commercial construction projects. This role provides hands-on experience in quantity take-offs, subcontractor outreach, and cost analysis while learning the fundamentals of preconstruction and estimating in a collaborative team environment. Key Responsibilities: • Assist estimators with quantity take-offs and material, labor, and equipment cost analysis., • Review project drawings, specifications, and documents to understand scope of work., • Help maintain and organize estimate files, bid documents, and subcontractor databases., • Support subcontractor outreach and communications for pricing and bid participation., • Assist with assembling bid packages, proposals, and presentations., • Participate in bid reviews and strategy meetings with the estimating team., • Gain exposure to preconstruction processes, scheduling, and value engineering., • Contribute to team discussions and provide input on project planning and delivery. Qualifications • Currently pursuing a Bachelors degree in Construction Management, Civil Engineering, or related field., • Strong interest in pursuing a career in commercial construction., • Excellent communication, organizational, and problem-solving skills., • Proficiency with Microsoft Office Suite; exposure to construction management software (e.g., Procore, Bluebeam, CMiC) is a plus., • Ability to work in a team-oriented environment and adapt to changing priorities. Applicants must be currently authorized to work in the United States on a full-time basis. We are unable to sponsor or take over sponsorship of employment visas at this time.

Job DescriptionPURPOSE The Project Engineer provides technical support and administrative help to Project Managers and the business unit as a whole. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. At a high level, under direct supervision of a Project Manager, a Project Engineer will: • Provide sales and business development support as needed to build client relationships, obtain more work, including providing assistance with design, material selection, estimating, and creation of proposals, scope letters, contracts, etc., • Participate in ongoing review, planning and formulation as it relates to the specific business unit and contribute to the team on how to achieve required and desired results., • Assist with day-to-day coordination and administration of projects, to include but not limited to: understanding project scope, managing budgets and fiscal controls through value engineering, monitoring quality control provisions, coordinating work sequencing, issuing purchase orders, procurement, change orders, and contractor approvals, as appropriate., • Assist with procuring subcontractors and monitoring their work quality and schedule as required for installation., • Ensure customer satisfaction by continual communication on scheduling coordination, project progress, and obtaining feedback on Baker Group’s performance, sharing any positive or negative feedback with team., • Attend jobsite visits, internal project meetings, and coordinate meetings as directed, including tracking action items and providing appropriate follow-up., • Help ensure project performance, operations and delivery are in compliance with design and/or specifications., • Develop relationships with customers and pursue opportunities which provide long-term relationships and revenue opportunities., • Utilize company standard documents including but not limited to business development processes, pre-proposal checklists, turnovers, subcontracts, purchase orders, warranty, etc., • Confer with project managers, business unit leaders, etc. to discuss and resolve any questions, complications or problems., • Accurate daily time and equipment reporting. MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Project Engineer I:, • Entry level role, typically supervised by a Project Manager., • Offers information, helps with coordination and preparation, assists with analyzing and compiling data., • May help prepare estimates and inspect work to assure compliance with plans and specifications., • Begins to build solid knowledge about the company, their trade best practices, recognized work standards and expectations., • Builds solid understanding of job cost history, contract status and job overview reports., • Builds skill in managing customer relationships, working with Accounting to bill customer and enter budget, and ensure quality execution., • Position normally requires a 4-year Engineering or Construction Management degree and 0-1 year of experience, including internships., • Project Engineer II‐ meets all requirements of Project Engineer I above and:, • Serves as a project technical source, providing interpretation and resolving questions and problems., • Coordinates pieces of the project given proven skill and ability., • Now involved in more detailed processes directly related to project execution, including budgeting, resource allocation, schedule development and quality controls, or other similar functions that require more expertise and experience., • Takes on additional client relationship building activities that lead to increased business revenue for Baker Group., • Position normally requires a 4‐year Engineering or Construction Management degree and 1‐4 years of experience, including internships., • May begin to run small projects or develop a book of business on their own., • Usually develops into a Project Manager role. CERTIFICATES, LICENSES, REGISTRATIONS • Valid driver’s license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Strong technical skills, including but not limited to, experience with the following software: project management, accounting, scheduling, inventory, design, document management, e-mail, Microsoft Office Suite, time accounting and spreadsheets., • Excellent active listening, verbal and written communication skills., • Strong initiative and attention to detail, prioritization, and organization skills; ability to work independently and effectively in a team environment., • Confident decision-making ability., • Ability to read and comprehend drawings and sketches., • Ability to understand and adhere to contract terms and conditions., • Ability to maintain technical expertise on new technologies, products, and tools through continuing education initiatives., • Basic knowledge of construction and renovation, including materials, methods, tools, etc. involved in strategic planning resource allocation and modeling, production methods and coordination of people and resources in a safe manner., • Knowledge of practical application of engineering science and technology, including applying principles, techniques, procedures and equipment to the design and production of various goods and services., • Knowledge of principles and processes for providing customer and personal services. ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk working on a computer, • Must be able to lift 20 pounds occasionally, • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Computer, • Calculator, • Tape measure, • PPE (hard hat, safety glasses, safety boots, Hi-Vis vest), • Clothing: jeans, appropriate office shirt Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job Description PURPOSE The Quality Assurance-Quality Control Project Engineer will create and develop relationships supportive of the Baker Group Core Values with team members, internal and external clients. This role will also manage projects in a manner that compliments all facets of the project from design to owner training. Maintain and grow the “Client for Life” concept for existing and new customers. This position directly manages and leads the Quality Controls and Assurance activities as part of a project team for large Mission Critical clients. Assist project management team with other management duties including project financials, scheduling and procurement, system installation, quality control and assurance, and customer relations. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. • Understanding of Quality Control and Assurance principals and responsibilities, • Coordinate and verify electrical instrumentation installation., • Issue tracking and resolution management, • Creating and uploading inspection checklist templates, • Updating construction field management site with installation/Cx progress, • Technical RFI development and tracking., • First of Kind installation management., • Control Parts receiving management., • Receive parts and verify orders are accurate., • Collect parts authentication documents and organize and upload data to cloud., • Kit parts for shipment to project., • Asset tagging management of field devices, • Wire Label management., • Continuously develop relationships with existing customers and pursue opportunities which provide long-term customer relationships and revenue opportunities, • Educate customers on Baker Group capabilities not only in the building automation business, but also cross selling capabilities for revenue opportunities within other business units, • Develop solutions for customers utilizing internal estimating software and standard product selections. Review with Baker Group team members solutions prior to submitting to customer – make sure we can deliver what we are selling MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Bachelor’s degree in Construction Science, Construction Management, Construction Engineering, Mechanical Engineering, Electrical Engineering, or Industrial Engineering preferred, • Experience in QA/QC management and execution., • Experience in Automation and HVAC systems is a plus, but not required., • Valid driver license with good driving record MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Ability to compare drawings, specs, submittals, materials and installations to identify discrepancies is key to being successful in this position., • Strong organizational Skills, • Strong attention to detail, • Proven ability to collaborate with internal and external stakeholders, • Display a proactive mindset, • Excellent written and verbal communication skills ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk working on a computer, • Must be able to lift 20 pounds occasionally, • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature and weather conditions EQUIPMENT/TOOLS • Laptop computer Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job Description Objective of the Position: Support day to day Production that involves Safety, Downtime, Quality, OEE and Ergonomic issues. Manage all new Product launch activities for the Plant that includes, Fixture design, Poke Yoke, Line mapping, Process Layouts, Equipment Installation, Process debugging, and Lean Manufacturing Implementations. Essential Accountabilities: The position incumbent ensures, that • Submit annual capital investments for plant, • Approve and sign off all Equipment and tooling for the facility, • Approve any process related procedures or improvements on production line, • Authority to stop production lines if there are quality or durability related risks, • New product implementation and capacity studies, • Preventative maintenance scheduling for equipment, plant and tooling, • Production Support and OEE, • Send recommendations to Engineering Manager to update equipment or process improvements, • Manage Maintenance, PM's and MRO inventory Secondary Accountabilities: The position incumbent ensures, that • Conduct all business related activities for, and on the behalf of, Eberspaecher within the limits of applicable local, state, and federal legal requirements., • Provide support to, and compliance with, all local and corporate Eberspaecher Health, Safety & Environmental (HSE) policies, procedures and other HSE related requirements., • Quality - Demonstrates accuracy and thoroughness and follows all ENA polices related to TS16949 and ISO 14001; looks for way to improve and promote quality., • Other duties as assigned. Requirement Profile: Professional Background / Basic Qualification / Work Experience: • Bachelor's degree in engineering., • Minimum seven years’ working as a Manufacturing Engineer with Motoman Robotics advanced programming and troubleshooting for a manufacturing supplier preferably automotive., • Minimum two years’ experience with AutoCAD, Catia or 3D modeling software, • Must have practical welding experience in MIG & TIG, • Ability to travel domestically by car or plane, • To perform this job successfully, an individual must be proficient in Microsoft Office & SAP Technical Expertise: • Ability to analyze data and prepare reports, statements and projections., • Ability to apply mathematical concepts and operations, including calculations, percentages, etc., • Ability to read and comprehend instructions, correspondence, and memos, and write correspondence., • Analytical- Synthesize complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures., • Business Acumen- Understands business implications of decisions., • Knowledge of continuous improvement of products for manufacturability., • Knowledge of engineering fundaments, mechanical systems, automotive systems, and exhaust systems., • Project Management- Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget; Manages project team activities., • Strives to continuously improve expertise, knowledge and skills. Methodical Competence: • Ability to handle multiple tasks smoothly in situations containing a moderate to high level of stress., • Ability to maintain a safe and clean work environment., • Adaptability – Able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent., • The ability to follow-up on projects and ensure all items are completed on time with all necessary data required and supporting documentation., • Dependability - Follows instructions, responds to management direction., • Organizational Support - Follows policies and procedures; Supports organization's goals and values., • Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently., • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations., • Takes responsibility for own actions; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan., • Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. Interpersonal Competence: • Ability to be self-motivated and to work with minimum supervision., • Ability to effectively present information to customers, supplier, coworkers and management., • Ability to maintain utmost confidentiality., • Ability to respond to common inquiries or complaints., • Ability to work as a Team Member towards overall company objectives. Teamwork – Contributes to building a positive team spirit., • Communicate and present proper information to customers, clients, and other employees of the organization., • Customer Service – Ability to manage difficult customers Responds promptly to their needs; Responds to requests for service and assistance; Meets commitments., • Initiative- Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Looks for and takes advantage of opportunities; Asks for and offers help when needed., • Innovation- Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Presents ideas and information in a manner that gets other’s attention., • Interpersonal skills-Focuses on solving conflict., • Judgment - Displays willingness to make decisions based on gathered facts; Exhibits sound and accurate judgment; Includes appropriate people in decision-making process, Makes timely decisions., • Leadership- Exhibits confidence in self and others; Inspires and motivates others to perform well., • Motivation- Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Participates in meetings., • Professionalism - Reacts well under pressure; Treats others with dignity, respect and consideration. Supervisory Competence: • This position has no supervisory responsibilities. Working Conditions: • This position involves working indoors around mechanical and hazards, fumes, irritants, with exposure to cold, heat and high noise levels under adverse conditions While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles.

Job Description Hazen and Sawyer is seeking an Assistant Engineer for our Cincinnati, OH; or Louisville, KY offices. As part of our Electrical team, you will be providing electrical design for water and wastewater facility projects. Qualified candidates should have an interest in industrial power systems design, including low voltage electrical power distribution, motor control, VFDs, lighting systems, equipment layout and related activities. Candidate should have familiarity with the NEC and related Codes. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Serve as an electrical designer on projects for water and wastewater facilities., • Execute redline markups from engineers, • Sizing conduit and wire, • Laying out electrical distribution equipment, • Designing lighting systems, • 0-4 years of experience. This is an entry level position., • Experience with Microsoft Office products is required., • Bachelor of Science in Bachelor of Science in Electrical Engineering (or will have in next 6 months), • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionDescriptionWe're looking for a Roadway Design EIT to join the HMB team! Engaged professionals lies at the heart of our vision statement. That’s why we strive to create a work environment that challenges and inspires our employees, igniting their passion and drive to achieve greatness each and every day. Key Responsibilities • Work under the responsible charge of a Professional Engineer as a member of a team in the design and preparation of technical reports, analysis/calculations and construction documents., • Preparation of accurate presentation, design and construction document details., • Preparation of permit applicaitons and submittal packages to agencies having jurisdiction., • Coordination with clients, subconsultants, permitting agencies, utility providers, contractors and other parties associated with the project., • A minimum of 2 years of experience in all technical aspects of roadway design, • Experience with OpenRoads Designer preferred, • EIT certification is preferred, • Detail-oriented individual wtih strong technical and organizational skills, • Proficiency in standard industry software including MS Office, • Works well in multidisciplinary team environments and ability to meet deadlines., • Excellent compensation package, • Flexible work schedule, • Ability to work remotely part-time, • Competitive holiday and paid-time-off programs, • 401(k) Plan and Match, • Competitive health, vision and dental insurance premiums, • Company-furnished life insurance, • Long-term Disability, • Parental Leave, • Variety of voluntary benefit options, • Employee Assistant Program (EAP), • Flexible Spending Account, • and More