Trabajos welder en Florida

Company: Gerber Collision & Glass Built with Intent. Driven by YOU. At the Gerber Collision & Glass, our teams work to provide the elite infrastructure and supportive environment you need to Be the Best and outperform at every touchpoint in collision and glass services. As we continue to grow and lead the industry, we ensure you have the resources and the team behind you to move your career forward. Ready to grow with a team that’s built for your success? Apply today. Our Commitment: The Boyd Group welcomes unique talents from all backgrounds and characteristics. We act with integrity and appreciate the diverse perspectives that make our "Greater Team" exceptional. Qualified individuals, including those with disabilities and Protected Veterans, are encouraged to apply. Job Description: The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times. Key Job Responsibilities Ensure consistent execution of WOW (Wow Operating Way) plan. Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle. Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible. Realigns car chassis and frames to repair structural damage. Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed. Replaces or repairs interior parts as needed. Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent. Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair. Performs other related duties as assigned. Education and/or Experience Required High school diploma or equivalent required. Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer. Required Skills/Abilities Ability to read job orders and work with very little supervision. Ability to work with other repairers within an auto body shop. Thorough understanding of methods and procedures to repair vehicle bodies. Thorough understanding of how to use tools required for the trade. Other Requirements Must be able to work safely in a noisy area with many odors present. Must be able to lift up to 30 pounds at times. Must be able to visually inspect vehicle damage in a variety of weather conditions. Must be able to bend, stretch, kneel, and squat to perform repairs and inspections. Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job. Benefits That Drive Your Success Gerber offers the comprehensive benefits you expect from an industry leader, including: Annual Paid Time Off (PTO) plans 2 weeks of Paid Parental Leave for Full time Employees who work a minimum of 30 hours per week 6 paid holidays annually Medical, Prescription Drug, Dental & Vision Insurance effective Day 1 401(k) Retirement Plan with company match Employer Paid Short-Term Disability & Life Insurance Additional Voluntary Life Insurance Continuing Education Opportunities Free Prescription or Non-Prescription Safety Glasses annually Annual Voluntary Uniform Stipend Voluntary Daily Pay option available About Us Gerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit _ to learn more about our company. AI Disclosure Statement: At The Boyd Group and all affiliated companies, we do not use artificial intelligence (AI) or automated tools to screen, assess, or select applicants for employment. All hiring decisions are made by real people who review each application individually. Compensation Details: $20 - $30 / Hour Flat Rate Flat Rate Compensation is a performance-based structure directly tied to turned hours, also referred to as booked hours. In the event that total compensation in a pay period is less than minimum wage, clocked hours will be calculated with a guarantee of applicable local or state minimum wage, whichever is greater. Compensation is commensurate with skill, education and experience. Supplemental Pay: This position may also be eligible for Bonus opportunities tied to individual or business initiatives. #ABTSOUTH Automotive, growth, advancement, collision repair, collision center, auto body, autobody, body shop, I-CAR, ICAR, dent repair, PDR, paintless, bodyman, body man, body tech, bodytech, auto body tech, auto tech, collision tech, collision technician, dealership, apprentice, ASE, body shop, bodyshop, weld, welding, welder, frame tech

Job Description Diversified Sourcing Solution is seeking a skilled Welder to join our team. The ideal candidate will have experience reading blueprints, operating welding equipment, and fabricating or repairing metal components while maintaining quality and safety standards. Responsibilities: • Perform MIG, TIG, and/or Stick welding as required, • Read and interpret blueprints, drawings, and specifications, • Measure, cut, and assemble metal materials, • Inspect completed welds to ensure quality standards are met, • Operate grinders, cutting torches, and other fabrication equipment, • Maintain a clean and safe work environment, • Follow all company safety procedures and regulations Requirements:, • Previous welding experience required, • Ability to read blueprints and use measuring tools, • Strong attention to detail and quality, • Ability to lift up to 50 lbs and stand for extended periods, • Reliable attendance and strong work ethic, • Welding certifications are a plus Benefits:, • Competitive pay, • Health, dental, and vision insurance, • Paid holidays and time off, • Career growth opportunities Apply today to join a growing team and put your welding skills to work! \nCompany Description Connecting Companies with Good Employees, and Employees with Good Companies!! Connecting Companies with Good Employees, and Employees with Good Companies!!

Job DescriptionFamily Owned Growing Shipping Container Depot is seeking Intermodal Chassis Mechanics and Welders to Repair Shipping Containers! Responsibilities will include: Chassis Mechanic Position: -Inspect, trouble shoot, diagnose, and perform maintenance on Intermodal Chassis as well as 53' Dry Vans -Perform safety inspections of equipment and prepare safety documents required by the Federal Motor Carrier Safety Administration (FMCSA), company and any other Federal, State or Local regulations -Interpret work orders- Replace chassis / trailer tires when needed -Repair or replace defective parts, components or systems -Test repaired equipment for proper performance and to ensure that the work meets manufacturer's specifications and legislated regulations Shipping Container Welder: -Mig Welding Experience -Inspect containers for damage -Perform repairs to containers including patches, welds, and floor repair/replacements Requirements / Qualifications: Experience in PMs and repairs * Must be able to lift 50lbs Must own your own tools (Basic set of Hand Tools) 2 plus Years' experience of Trailer repair (Chassis, Containers, etc.) FMCSA, Brake replacement/repair, and tire replacement/ repair experience. -Fabrication and welding skills, is a plus Job Type: Full-time, Monday thru FridayOvertime possible/likely Driver's License (Preferred)

Job Description Weekend Shift/ Night Shift36-Hour Work Week Paid for 40 Hours- Weekends 53 hour week Weeknights $1.20 Per Hour Shift Differential for Nights Friday- Sunday 5 AM- 5 PM or 5 PM- 5 AM Night Shift Monday- Thursday 5PM- 5AM Double Time After 50 hrs. Worked! At Veritas Steel, we’re leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by performing their job to the best of their ability, as well as people who enjoy fun and hard work. Ready to leave your legacy? Join the Veritas Steel team today! Welders employed at Veritas Steel's Palatka location are responsible for performing FCAW & SMAW processes to codes, and standards, including repairs and miscellaneous tasks as assigned by Shop Supervisor. They must be able to meet high production demands in a timely manner and complete high-quality work with expertise. Welders must also adhere to company policies to ensure a safe working environment. Principle Duties and Responsibilities: • Uses proper safety equipment to ensure surfaces are adequately prepared for all operations:, • Air arc, Grove Welds, Flex Core, Full Pin, • Using correct procedures to obtain proper weld profile, etc.,, • Understands general knowledge of welding codes and welding tools, • Proper preparation, cleaning, and setup, • Hand torch – setup and use, • Understand basic weld symbols/gauges, • Maintains shop, equipment, tools, vehicles, etc. for the purpose of ensuring the availability and functioning of required items and ensuring safety, • Coordinates with shop supervisor and other personnel for the purpose of completing projects/work orders efficiently, on time, and with no defects, • Adheres to safety policies to ensure a safe working environment for oneself and surrounding coworkersKnowledge, Skills, & Abilities:, • High School diploma or GED, • Must be able to read, write, and comprehend English, • Need to be able to read metric tapes, • Able to adapt to work priorities, communicate well, meet deadlines and schedules, and work as part of a team, • Commitment to work safety and actively participating in our safety culture, • Commitment to attendance policy and procedures, • Quality, accuracy, thoroughness, and reliability of work performed, • Willingness to learn and contribute to the success of your team, • Welding experience is preferred but not requiredPhysical Requirements:, • Able to lift 40 pounds and carry 30 pounds, • Must be able to push /move objects up to 50 pounds of force, • Pulling requirements up to 122 pounds of force, • Necessary to stand, walk, stoop, and kneel up to 99% of the shift, • Must have a good range of motion when reaching forward, shoulder to overhead, and bending, • Agile fingers and thumbs on both handsWorking Conditions:, • Work is performed indoors in a large warehouse or outside in all weather conditions, • There is regular exposure to dirt, dust, paint fumes, noise, moving equipment, heavy steel & other possible hazardous conditions, • Safety glasses, hearing protection, hard hats, and steel-toed boots are required; a respirator is required for specific operations Compensation details: 19.45-22.16 Hourly Wage PIdf15d6afc5f0-25405-41739330

Job DescriptionDescription: We are seeking an experienced Sheet Metal Deck Installer/Ironworker to join our team. This role involves the safe installation of sheet metal decking on steel framing and performing shear stud installation. The ideal candidate is reliable, safety-conscious, and comfortable working at heights and in varied weather conditions. Key Responsibilities: • Lay and attach metal decking on steel structures, • Operate hand, power, pneumatic, and powder-actuated tools safely and effectively, • Maintain tools and equipment in proper working condition, • Accurately report time and attendance using technology, • Comply with OSHA, customer, and company safety standards, • Perform additional duties as assigned Physical Requirements: • Stand and walk, • Use hands to handle and grip equipment and tools, • Reach with hands and arms, • Climb and balance, • Stoop, kneel, crouch, • Talk and hear, • Lift more than seventy-five pounds (75 lbs.) Work Environment: • Work on construction sites, • Work at heights greater than forty feet (40 ft.), • Outdoor weather conditions (Heat and Cold), • Work with hand, power, pneumatic and powder actuated toolsRequirements:, • *100% Nationwide travel required*, • Strong work ethic and a positive attitude, • Experience working with hand, power, pneumatic, and powder-actuated tools, • Must be comfortable working outdoors in varying weather conditions, • Bilingual (English/Spanish) is a plus Preferred Certifications (Not Required but a Plus): • OSHA 10-Hour Construction Safety Certification, • Welding Certification, • Aerial Lift Certification Work Schedule: • Full-time, non-exempt position, • Work hours based on job site requirements If you are a dedicated professional with experience in sheet metal deck installation and ironwork, we encourage you to apply and join our team!

Job Description Roofing Service Technician Helper - Commercial Miami, FL “24/7 MaintenX. We keep business running!" MaintenX International is a fully licensed, general contracting and state certified roofing company with a focus on total facility maintenance and repair. We are looking for a Roofing Service Technician Helper - (Commercial) to join our team. As a Roofing Service Technician Helper, you will assist your Foreman, Crew, Project Coordinator and Project Manager in the completion of production projects for our commercial clients. The Commercial Roofing Service Technician Helper updates assigned work orders with documentation (pictures, purchase orders, and completed work descriptions), manages truck organization (materials, cleanliness, and maintenance), manages job organization, oversees daily project needs (materials, labor, and logistics). At MaintenX, our customers rely on us to keep their business running, our Roofing Service Technician Helper is an integral part of ensuring that we meet and exceed this expectation. Summary of Position: The Roofing Service Technician Helper - Commercial position will utilize their industry training and knowledge to effectively assist their assigned Foreman in the completion of service requests. This includes assisting the Foreman with locating and repairing issues with roof systems, assisting with updating assigned work orders documentation (pictures, purchase orders, completed work description, and recommended work order notes), assisting the Foreman with truck organization (materials, cleanliness, and maintenance). The Roofing Service Technician Helper - Commercial position directly contributes to the success and profitability of the individual crew by effectively and efficiently utilizing their specialized skills and knowledge to help their Foreman solve customers’ problems. The types of work include but are not limited to roofing inspections and reports, leak calls, scope work, and large scope roofing installations as experience allows. Duties & Responsibilities: • Maintains truck stock and communicates material stock needs to Foreman., • Assists Foreman with ladder set up and breakdown including locking down for safe travel., • Maintains a professional personal appearance during all work order visits., • Maintains assigned crew vehicle in a clean and organized manner at a minimum of a BI-WEEKLY schedule., • Communicates tool maintenance and replacement needs in a timely manner., • Completes repairs according to MINIMUM established Roofing Repair Guidelines., • Completes repairs within all OSHA and MaintenX safety standards., • Communicates to Foreman any deviations from the established Guidelines., • Assists Foreman with completing inspections using company software (XFactor and IAuditor) to deliver reports to our customers or estimating team for completion of proposals or preventative maintenance programs., • Assists with updates of purchase orders in XFactor and providing costs to team members., • Assists the Foreman with scope generation of recommended work including details, measurements, supporting pictures, requested equipment, specialty details such as Tile or Metal panels, suggested material list, and labor needed to complete the work., • Assists in supporting the Recommended Work Program which is a key factor in the revenue and profitability of the service vehicle., • Responsible for notifying Regional Service Coordinator, Regional Service Manager or Operations Manager regarding any sick, personal time or vacation requests., • Assists all levels of management, as assigned., • When necessary, additional duties may be assigned, and the company expects the Roofing Service Technician Helper - Commercial to exercise initiative to anticipate and prevent problems. Competencies: • Dependability: Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan., • Attendance/Punctuality: Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Initiative/Motivation: Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Asks for and offers help when needed., • Customer Service: Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments., • Problem Solving: Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Required Education & Experience: • High school diploma or equivalent., • One to two years of experience in low slope commercial roofing across all applications (BUR, MODIFIED, TPO, PVC, EPDM, METAL, COATINGS, and METAL FLASHINGS), • One to two years of experience with steep slope systems across all applications (Asphalt Shingles, Tile, and Metal), • Experience with hand tools and materials used in the construction field., • Experience with working in a safety driven culture., • Good communication skills both written and oral. Preferred Education & Experience: • Technical training from manufacturers (Firestone, Carlisle, Johns Manville, etc.) is a plus., • OSHA 10, 30, Aerial Lift, Fall Protection, and CERTA active certifications is a plus., • Three or more years of experience in low slope commercial roofing across all applications (BUR, MODIFIED, TPO, PVC, EPDM, METAL, COATINGS, and METAL FLASHINGS), • Three or more years of experience with steep slope systems across all applications (Asphalt Shingles, Tile, and Metal), • Experience with using roofing specific tools and equipment; such as a handheld heat welder and open flame torch, etc., • Able to communicate in Spanish fluently is a plus. Additional Eligibility Requirements: • Ability to work independently and as a member of a team and with your Foreman., • Good organizational and time management skills., • Ability to deal effectively and respectfully with a diversity of individuals at all organizational levels., • Exhibits good judgement with the ability to make timely and sound decisions, while able to support and explain reasoning for decisions., • Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm., • Excellent verbal and written communication skills which are used to communicate professionally and effectively in person, or on the phone., • Attention to detail with the delivery of repairs and the communication of those repairs is a MUST. Physical Demands: • Ability to lift 50 pounds without assistance., • Ability to work in hot environments during all seasons., • Ability to lift and set up ladders in a safe manner. Work Environment: This is a fast-paced team-work based environment. Travel Requirements: Travel is required for completion of work orders. Most travel will be Monday through Friday. There will be occasional travel required over the weekends as work requires. Benefits We value our team and provide an excellent benefits package including: • Company Uniforms provided, • Opportunities for overtime hours, • Medical, Dental and Vision Insurance, • Life Insurance and Short and Long Term Disability, • 401(k) retirement plan with company match, • Paid Vacations, • Paid Holidays and Sick days, • Personal Cell Phone Service Discount through company cell phone carrierCompensation:, • Compensation Base: $20-$25 hourly based on experience, • Overtime opportunities, • Comprehensive benefits package, including health insurance, retirement plan, paid time off, and opportunities for professional development and certification.

Job DescriptionDescription: JOB DESCRIPTION Job Title: Welder Department: [Dept] Reports to: [role of supervisor] Effective Date: [Date] FLSA Classification: Non-Exempt Job Summary: A welder specializes in joining metal parts together using various welding techniques. Here at Golden our welders are skilled in Aluminum MIG welding. The welders are a part of a team that help create the materials needed to build the boat lifts. Supervisory Responsibilities: • None Duties and Responsibilities: • Structural weld aluminum and Stainless components in flat, vertical, or overhead positions., • Layout, position, align, and secure parts and assemblies prior to assembly using straight edges, combination squares. calipers, and rulers, • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications., • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment., • Utilize shop jigs and design simple fixtures to improve productivity., • Clamp, hold, tack-weld, heat-bend, grind, or bolt component parts to obtain required configurations and positions for welding., • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals., • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits., • Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained., • Ensure outputs are meeting documented requirements., • Contributes to team effort by accomplishing related results as needed., • This job description is not intended to be all-inclusive. Employee may perform other related duties as needed to meet the ongoing needs of the organization., • Become familiar with each department and be willing to cross train when needed., • Read and understand the production schedule, product descriptions written on tags, green sheets, work orders and plans., • Maintain a clean and organized work area. Spills are to be cleaned up immediately, Floors kept free of metal shaving accumulation, hand tools and equipment kept clean and in good working order., • NEVER use a tool, ladder, machine, extension cord or any other item that is broken, cracked, guard removed, and do not attempt a quick fix of a compromised tool or equipment., • Do not use any equipment that you have NOT been trained and certified on, including forklift. Do not attempt a set-up on equipment until you have been trained to do so., • Never modify or substitute a material, weld wire, procedure, tag, hardware, or shop method without the proper authorization., • Operate safety equipment, use safe work habits, and follow all safety rules and regulations. Requirements: Required Skills/Abilities: • Knowledge of proper use of hand tools, • Understand common units of Measure and Use of a Tape Measure, • Read and understand the production schedule, product descriptions written on tags, green sheets, work orders and plans., • Able to work with a minimum of supervision. Minimum Education and Experience: • High School diploma or GED and 1 year of applicable experience or a combination of equivalent education and experience. Other Requirements: • The employee will stand for extended periods of time and will need to be able to lift approximately 50-75 lbs., • Push-Pull up to 53 LBS to initiate movement of cart., • Lift up to 75 LBS. Occasionally, 30 LBS. Frequently, 20 LBS Overhead, • Completed health screening questionnaire., • Provided at least two professional references (upon request)., • Completed applications, resume and education if requested. PI5e5a7c1651b2-25405-41155057

Job Description QAI Job Number: QAI-MIAMI-Sr.Weld/TECHNBP08242026 JOB TITLE: Welder & Technician – Building Products LOCATION: Medley, FL NUMBER OF POSITIONS: 1 CATEGORY: Building Products BACKGROUND: QAI laboratories is a testing, inspection and certification organization providing services to manufacturers of Electrical Products, Building Products, Vehicles, Factory Built Structures and other regulated products. Recognition of the QAI name and logo have grown significantly over the past few years resulting in significant expansion of the business. We are looking for a Sr. Welder / Technician to join our Building Products team in Medley, FL. Our ideal candidate is someone who is good with their hands, can handle power tools, is reliable and/or has had prior experience in the construction industry. DUTIES: The successful candidate will perform, but not limited to, the following duties: Welder: Read blueprints/drawings and plan layouts and proceduresTake and read measurementsAlways follow specifications and instructions for maximum efficiencyWeld components using manual or semi-automatic welding equipmentDetermine the appropriate welding equipment or machinery to be usedSet up components for weldingAlign components using calipers, rulers etc. and clamp piecesRepair machinery or report damages on machines and equipmentTest and inspect welded surfaces and structure to discover flawsMaintain equipment in a condition that does not compromise safetyWork under strict timelinesAble to lead a small team Technician: Building of test fixtures and assembliesDismantling test chambers and uninstalling productsExecution of provided work instructionsAssisting Senior technicians as assignedClean up, organization of inventoryWritten and verbal reports to clients and managementSomeone willing/able/interested in learning and growing from within the organizationOther duties as assigned by the manager or its designee QUALIFICATION: The successful candidate will have: Microsoft Office (Excel and Word required, other programs an asset)Safe working practice with tools associated with constructionor similar role in a construction setting3+ years of experience using a variety of welding equipment, machinery and procedures.3+ years of experience in using electrical or manual toolsAbility to read and interpret technical documents and drawingsGood knowledge of and adherence with safety standardsAttention to detailCritical thinker and problem-solving skillsTeam playerGood time-management skillsGreat interpersonal and communication skillsForklift operator, counterbalance and high reachScissor lift operator Key Technical Competence: Accepts instruction and follows it for testing outside of their general scope of knowledge and experience.Able to grasp general concepts in a field of testing and apply it to specific test methods.Able to perform simple testing and as knowledge grows in a specific field of testing graduates to more complex testing methods.Seeks assistance and knowledge from more senior personnel when a specific requirement is outside of their general scope of knowledge.Good working knowledge of the test methods in their specific discipline.Able to multi-task with some degree of efficiency and accuracy.Maintains a sense of ownership and responsibility for projects assigned to them. Additional Assets include: Forklift experience or certificationCertified Welding and FabricationPrevious experience in construction industryOHSA 10 Join our Team! Learn, Develop, Grow! At QAI, you will have the opportunity to put your aptitude, experience, knowledge, and desire to learn to the test. We make a difference in people’s lives through the work we do as a top-notch Product Testing, Certification, and Inspection body whilst providing rewarding careers for our employees. Equal Opportunity Employer: QAI Laboratories is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. NOTE: No sponsorship is available. * PIba8a5cd22559-25405-41517325

Job DescriptionDescriptionThe Journeyman will perform installation and maintenance of low-sloped roof systems and membranes. Candidate will be proficient in reading and following manufacturer installation and warranty conditional specs, as well as operating within company outlined safety standards. Journeymen will creat client reports via tablet. Supports the Foreman with communication, training, and directing crew members as needed. Key Responsibilities • Install and maintain low-sloped roof systems (TPO, PVC, BUR, modified bitumen, EPDM); 3+ years’ experience preferred., • Operate tools and equipment including Leister welder, hot air gun, and propane torch (preferred)., • Follow job specs, warranties, safety guidelines, and quality standards., • Create client reports via tablet and use technology for communication/receipts., • Support Foreman with communication, training, and directing crew members. Skills, Knowledge and Expertise • Prior roofing or related trade experience is preferred but not required., • Ability to communicate professionally and effectively, • Ability to operate handheld technology such as tablets and/or smartphones Benefits • Work equipment including company vehicle, all tools and materials, • Medical, Dental & Vision Insurance, • Pet Insurance, • Short Term Disability, • Employer-matched 401(k), • Health Savings & Flexible Spending Accounts (HSA) & (FSA), • Enterprise Discounts

Auto Body Technician Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Be a part of a rapidly growing company whose mission is to put safety, quality, integrity, and heart into every vehicle we repair and customer we serve. Classic Collision offers competitive pay, benefits, and career advancement opportunities. Please come and join our team! Why Choose Classic Collision? • Paid Weekly, • Continuous Training, • Supportive Team Culture, • Company match 401K, • Medical/Dental/Vision, • Paid Time Off - 6 Paid Holidays, • Rewarding Work Responsibilities • Complete disassembly of vehicle to assist Collision Estimators in assessing damage to prepare a 100% Repair Plan, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Plan work procedure: follow work order for all operations listed, • Remove upholstery, accessories, electrical and hydraulic windows, and seat operating equipment to gain access to damaged area of vehicle if needed. Store parts on carts or cover to eliminate potential damage, • Mend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged panels and bolts or welds replacement parts in position and reassemble after parts are painted, • Operate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.), • File, grind, and sand repaired surfaces before turning vehicle over to the Paint Dept., • Repair or replace defective parts, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Inspect and test drive repaired vehicles to check for compliance with safety and quality standards, • Perform other related duties as assigned, • Comply with all Classic Collision standard operating procedures, safety, rules, and guidelines Qualifications • Must be at least 18 years of age, • I-CAR / ASE certifications preferred, • 2-3 years’ collision repair experience preferred, • Valid Driver's License Required, • Customer-focused attitude with the ability to work well in a team environment, • Ability to read and comprehend written instructions and information, • Successful completion of background check required Behaviors/Competencies: • Integrity-Respect and accountability at every level and every interaction, • Customer Service-Provide the highest level of customer service while building customer satisfaction and retention, • Innovation-Develops and displays innovative approaches and ideas to our business, • Teamwork-Contributes to building a positive team spirit and supports everyone’s efforts to succeed Physical & Environmental While performing the duties of this job, the employee is regularly required to use hands, and is required to talk and hear. The employee is frequently required to stand, sit, and walk occasionally for long periods at a time. The employee may occasionally be required to reach with hands, arms and move objects up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and ability to adjust focus. In addition, abilities for assessing the accuracy, neatness and thoroughness of the work assigned is required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential function. Classic Collision is an Equal Opportunity Employer: As an equal opportunity employer, Classic Collision does not discriminate against any employee or candidate based on age, race, gender identity, gender expression, genetic information, national origin, physical or mental disability, protected veteran status, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by all applicable federal, state, and local laws. Reasonable Accommodations: Classic Collision is an equal opportunity employer that is committed to working with and providing reasonable accommodations to individual with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or submit an online application, please e-mail recruiting@classiccollision.com or call (470)500-6808. This email and phone number are listed exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. This job description is not a complete statement of all duties and responsibilities comprising the position. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description Revolution Fence Company is expanding our fabrication capabilities and seeking a highly motivated Fabrication & Operations Lead to help design, implement, and manage our fabrication shop processes. This role blends hands-on welding/fabrication with building scalable systems, procedures, and team capability to deliver custom gate fabrication, railing, dumpster enclosures, and other small-scale metalwork. You will be part of a growth-focused culture that values teamwork, communication, and continuous improvement. If you’re energized by building something from the ground up and want to grow with a company, this is the role for you. Key Responsibilities: • Design, implement, and manage the fabrication division’s end-to-end process: from intake and estimating to production planning, quality control, and delivery., • Develop and document shop procedures (work orders, cut lists, nesting, welding procedures, QA/QC checks, SOPs, safety programs)., • Create project timelines, material planning, and budgeting for custom fabrication jobs., • Lead hands-on welding/fabrication for aluminum, galvanized steel, and related materials as needed (MIG/TIG/STICK)., • Read and interpret blueprints, schematics, and technical drawings; translate customer requirements into actionable fabrication plans., • Maintain equipment maintenance schedules, tooling inventory, and safety compliance., • Collaborate with project managers, contractors, and customers to ensure on-time, on-budget delivery., • Foster a safe, collaborative, and respectful work environment; uphold OSHA and industry safety standards., • Embrace and contribute to our culture of teamwork, accountability, and growth., • Required Qualifications Required Qualifications • 3+ years hands-on welding/fabrication experience; 1+ year in a supervisory or process-improvement role (fabrication shop, metal fabrication, or equivalent)., • Strong welding skills (MIG, TIG, and/or stick) with the ability to mentor others., • Excellent leadership, communication, and collaboration skills., • Ability to manage multiple projects, meet deadlines, and adapt to changing priorities., • Commitment to safety, quality, and customer satisfaction., • Motivated by growth, with a desire to build and scale a fabrication capability within a family-owned business. Bilingual abilities are optional but a plus Benefits: • Paid Holidays, • Paid Time Off, • Supportive and team-oriented work environment, • Competitive compensation with clear growth potential based on performance and company growth If you are a skilled welder looking for a company to grow with, Revolution Fence Company is the place for you. Join our team and help us revolutionize the fencing industry one project at a time. #hc123172

Job Description Sea Hawk Maritime, LLC: Dredge Deckhand This is a great opportunity for an experienced Deck Hand who can help the dredge crew on the water and land. You must have at least 3 to 5 years of dredging or marine construction experience. Starting Hourly Pay Range for This Position: $20.00 to $22.00. This is based on previous work experience, skills, and current certifications / professional licenses. Responsibilities For the Dredge Deckhand: • Communicate with Dredge Operator, Boat Operators and barge loader to coordinate dredge movements., • Renews anchor and buoy lines repaired, oiled, greased, and in good operating condition., • Secures Mooring Lines to vessels., • Assists in monitoring the condition of wire cables, winches, pulleys, blocks, pipeline and mooring fixtures., • Couples and aligns sections of dredge pipelines to assure efficient discharge of silt from waterway. Sets anchors to secure float lines., • Complete Daily Boat Maintenance Log/Checklist is Mandatory, • Comply with safety practices, rules, and regulations while performing job duties and follow company procedure in reporting unsafe conditions or practices., • Assist in performing maintenance as needed., • Assist with washing and maintaining boats and equipment in proper working order., • Keep work areas clean and organized., • Work as a team and fulfill any and all other duties and tasks as assigned. Requirements For the Dredge Deckhand: • 3 to 5 years of experience in dredging or marine construction., • Must be able to travel., • Must Provide own tools besides specialty tools like a welder, compressor, etc..., • OSHA Certification a plus., • Boating or Equipment Certifications a plus., • A Valid Driver's License is required to be maintained throughout your employment., • Must be able to work outside for entire shift in all weather conditions (hot, humid, cold, wet) required., • Be honest, hardworking, reliable, punctual and attitude to get the job done. Physical Demands/Work Environment for The Dredge Deckhand: • Physical/Sensory Functions: Regularly will use sit, use hands, talk/hear; Frequently will reach with hands; Occasionally will stand, walk, climb or balance, stoop, kneel, crouch or crawl, taste/smell., • Lift and/or Move Functions: Regularly will lift up to 10 pounds; Frequently will lift up to 25 pounds; Occasionally will lift up to 50 pounds. Employee Benefits. An excellent compensation and benefits package is offered. Benefit plans include: • Medical, • Dental, • Vision, • 401(k) Retirement Plan, • Life Insurance, • Short Term and Long-Term Disability Insurance, • Paid Time Off for Vacation, Sick and Holidays Sea Hawk Maritime, LLC is a: • Drug-Free Workplace, • Equal Opportunity Employer, • Homeland Security - E-Verify Company. Sea Hawk Maritime, LLC will only employ those who are legally authorized to work in the United States. For more information, please visit www.seahawkmaritime.net Job Posted by ApplicantPro

Job Description Key Responsibilities • Read Blueprints: Interpret technical drawings, schematics, and weld symbols., • Material Prep: Cut, shear, grind, and bend metal stock using Eagle/Ercolina benders, saws, brakes, or plasma cutters., • Fit-Up and Tack: Align and clamp parts together before final welding., • TIG Welding: Execute precise, high-quality TIG welds on aluminum in various positions., • Finish Work: Grind, polish, and clean welded joints to meet product standards., • Quality Check: Inspect finished work using tape measures, calipers, or visual checks. Requirements and Qualifications • Experience: Proven history in aluminum fabrication and TIG welding ., • Technical Skills: Strong proficiency with TIG equipment, hand tools, and shop machinery (grinders, saws)., • Certifications: AWS or relevant welding certifications are a strong plus., • Physical Ability: Able to stand for long periods, crouch, and lift heavy metal pieces., • Safety: Knowledge of OSHA rules and proper use of personal protective equipment\nCompany Description Since 1993 this company has been built on hard work, innovative thinking, pride in craftsmanship, and a sincere desire to see each other and our customers succeed. We provide our team with the benefits they need to take care of themselves and their families, pay a safety bonus to recognize those who work safely on the job site, and back everyone with newer company vehicles, modern equipment, and a 38,000 sq. ft. facility, the tools to do the job right. Since 1993 this company has been built on hard work, innovative thinking, pride in craftsmanship, and a sincere desire to see each other and our customers succeed. We provide our team with the benefits they need to take care of themselves and their families, pay a safety bonus to recognize those who work safely on the job site, and back everyone with newer company vehicles, modern equipment, and a 38,000 sq. ft. facility, the tools to do the job right.

Description: JOB DESCRIPTION Job Title: Welder Department: [Dept] Reports to: [role of supervisor] Effective Date: [Date] FLSA Classification: Non-Exempt Job Summary: A welder specializes in joining metal parts together using various welding techniques. Here at Golden our welders are skilled in Aluminum MIG welding. The welders are a part of a team that help create the materials needed to build the boat lifts. Supervisory Responsibilities: None Duties and Responsibilities: Structural weld aluminum and Stainless components in flat, vertical, or overhead positions. Layout, position, align, and secure parts and assemblies prior to assembly using straight edges, combination squares. calipers, and rulers Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Utilize shop jigs and design simple fixtures to improve productivity. Clamp, hold, tack-weld, heat-bend, grind, or bolt component parts to obtain required configurations and positions for welding. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. Ensure outputs are meeting documented requirements. Contributes to team effort by accomplishing related results as needed. This job description is not intended to be all-inclusive. Employee may perform other related duties as needed to meet the ongoing needs of the organization. Become familiar with each department and be willing to cross train when needed. Read and understand the production schedule, product descriptions written on tags, green sheets, work orders and plans. Maintain a clean and organized work area. Spills are to be cleaned up immediately, Floors kept free of metal shaving accumulation, hand tools and equipment kept clean and in good working order. NEVER use a tool, ladder, machine, extension cord or any other item that is broken, cracked, guard removed, and do not attempt a quick fix of a compromised tool or equipment. Do not use any equipment that you have NOT been trained and certified on, including forklift. Do not attempt a set-up on equipment until you have been trained to do so. Never modify or substitute a material, weld wire, procedure, tag, hardware, or shop method without the proper authorization. Operate safety equipment, use safe work habits, and follow all safety rules and regulations. Requirements: Required Skills/Abilities: Knowledge of proper use of hand tools Understand common units of Measure and Use of a Tape Measure Read and understand the production schedule, product descriptions written on tags, green sheets, work orders and plans. Able to work with a minimum of supervision. Minimum Education and Experience: High School diploma or GED and 1 year of applicable experience or a combination of equivalent education and experience. Other Requirements: The employee will stand for extended periods of time and will need to be able to lift approximately 50-75 lbs. Push-Pull up to 53 LBS to initiate movement of cart. Lift up to 75 LBS. Occasionally, 30 LBS. Frequently, 20 LBS Overhead Completed health screening questionnaire. Provided at least two professional references (upon request). * Completed applications, resume and education if requested. PI369502e47ec5-38003-41155057

Weekend Shift/ Night Shift 36-Hour Work Week Paid for 40 Hours- Weekends 53 hour week Weeknights $1.20 Per Hour Shift Differential for Nights Friday- Sunday 5 AM- 5 PM or 5 PM- 5 AM Night Shift Monday- Thursday 5PM- 5AM Double Time After 50 hrs. Worked! At Veritas Steel, we're leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by performing their job to the best of their ability, as well as people who enjoy fun and hard work. Ready to leave your legacy? J oin the Veritas Steel team today! Welders employed at Veritas Steel's Palatka location are responsible for performing FCAW & SMAW processes to codes, and standards, including repairs and miscellaneous tasks as assigned by Shop Supervisor. They must be able to meet high production demands in a timely manner and complete high-quality work with expertise. Welders must also adhere to company policies to ensure a safe working environment. Principle Duties and Responsibilities: Uses proper safety equipment to ensure surfaces are adequately prepared for all operations: Air arc, Grove Welds, Flex Core, Full Pin Using correct procedures to obtain proper weld profile, etc., Understands general knowledge of welding codes and welding tools Proper preparation, cleaning, and setup Hand torch - setup and use Understand basic weld symbols/gauges Maintains shop, equipment, tools, vehicles, etc. for the purpose of ensuring the availability and functioning of required items and ensuring safety Coordinates with shop supervisor and other personnel for the purpose of completing projects/work orders efficiently, on time, and with no defects Adheres to safety policies to ensure a safe working environment for oneself and surrounding coworkers Knowledge, Skills, & Abilities: High School diploma or GED Must be able to read, write, and comprehend English Need to be able to read metric tapes Able to adapt to work priorities, communicate well, meet deadlines and schedules, and work as part of a team Commitment to work safety and actively participating in our safety culture Commitment to attendance policy and procedures Quality, accuracy, thoroughness, and reliability of work performed Willingness to learn and contribute to the success of your team Welding experience is preferred but not required Physical Requirements: Able to lift 40 pounds and carry 30 pounds Must be able to push /move objects up to 50 pounds of force Pulling requirements up to 122 pounds of force Necessary to stand, walk, stoop, and kneel up to 99% of the shift Must have a good range of motion when reaching forward, shoulder to overhead, and bending Agile fingers and thumbs on both hands Working Conditions: Work is performed indoors in a large warehouse or outside in all weather conditions There is regular exposure to dirt, dust, paint fumes, noise, moving equipment, heavy steel & other possible hazardous conditions Safety glasses, hearing protection, hard hats, and steel-toed boots are required; a respirator is required for specific operations Compensation details: 19.45-22.16 Hourly Wage PI9c86d1d4a20a-38003-41739330

Description: WELDER/SPOT WELDER NEEDED 1st & 2nd SHIFT AVAILABLE Decimal Engineering is a fast-paced drug-free, equal-opportunity employer and manufacturing facility located in Coral Springs, Florida. Decimal Engineering specializes in Precision CNC Machining and Custom Sheet Metal Fabrications for the aerospace, medical, automotive, electronics, and marine-related industries. If you thrive in an environment that moves very quickly and is always evolving, Decimal Engineering is a growing and we are currently looking for a WELDER with SPOT WELDING experience. The Welder position is the perfect position for a dedicated, self motivated team player willing to maintain an aggressive production schedule. Overtime and adjusted hours are sometimes necessary as scheduling demands. Candidate must be a highly skilled individual with a minimum of five years welding experience. This position requires comprehensive working knowledge with stainless steel, aluminum and mild steel (all with a wide range of material thickness). Skills, Knowledge, and Abilities Requirements: Specific knowledge of MIG and TIG Welding with 5+ years experience TIG welding on ALL metals (Stainless, mild, aluminum) in ALL positions Spot welder setup (Tooling selection, machine setup) Experience in building fixtures and doing setups for precision sheet metal fabrication Ability to read blueprints and determine quality requirements Ensure outstanding quality and optimum efficiency are consistently achieved Dependability Good interpersonal skills and the ability to communicate in English. Compensation details: 20-26 Hourly Wage PI648a0e5c0ba1-38003-34114763

Description: WELDER/SPOT WELDER NEEDED 1st & 2nd SHIFT AVAILABLE Decimal Engineering is a fast-paced drug-free, equal-opportunity employer and manufacturing facility located in Coral Springs, Florida. Decimal Engineering specializes in Precision CNC Machining and Custom Sheet Metal Fabrications for the aerospace, medical, automotive, electronics, and marine-related industries. If you thrive in an environment that moves very quickly and is always evolving, Decimal Engineering is a growing and we are currently looking for a WELDER with SPOT WELDING experience. The Welder position is the perfect position for a dedicated, self motivated team player willing to maintain an aggressive production schedule. Overtime and adjusted hours are sometimes necessary as scheduling demands. Candidate must be a highly skilled individual with a minimum of five years welding experience. This position requires comprehensive working knowledge with stainless steel, aluminum and mild steel (all with a wide range of material thickness). Skills, Knowledge, and Abilities Requirements: • Specific knowledge of MIG and TIG Welding with 5+ years experience, • TIG welding on ALL metals (Stainless, mild, aluminum) in ALL positions, • Spot welder setup (Tooling selection, machine setup), • Experience in building fixtures and doing setups for precision sheet metal fabrication, • Ability to read blueprints and determine quality requirements, • Ensure outstanding quality and optimum efficiency are consistently achieved, • Dependability, • Good interpersonal skills and the ability to communicate in English. Compensation details: 20-26 Hourly Wage PIe562533d8e20-37820-34114763

Job Description R-Works is regarded as one of the top independent service and restoration shops in the country. We are a low volume, boutique repair shop catering to some of the top collectors in the world. You won’t find any jewelry or watch display cases we are strictly service and restoration. We are looking to assemble an All-Star team for our new facility located at the luxurious One Flagler Building in downtown Miami. We've added a lot of new tooling for our new shop. 2 Witschi Chronoscope X1 units, 2 Ergolift electric height adjustable watchmaker benches, ElmaSolvex VA cleaning machine to add to our already very tooled shop which already included two lapping machines, half a dozen lathes, Creviosier refinishing unit, laser welder, micro-tig welder and more. We do premium work for premium clients that appreciate extra level of quality that we are known for. We work exclusively on Rolex and Tudor from the 1960s through current references. We're are NOT a high volume shop even though we are bombarded with more service requests than we can accept. Some months are tougher than others but we will not sacrifice quality for volume so this number is not in stone. We are extremely passionate about the work we do bordering fanatical. The extra effort and pursuit to constantly get better and do high quality work is noticed and has defines our company culture. Our initial watchmaking team will include: 1 - Master Watchmaker in a leadership role. Rolex experience is a must for this position. We expect 10+ years of total watchmaker experience but not a deal breaker. Experience on a lathe for bush and sleeve work would be fantastic but not a deal breaker. The candidate we imagine will make a starting salary of $100k/yr and we will reach bonuses to take them to $120k+. If this sounds like you please apply. 1 - Very skill watchmaker that can work well with or without supervision. We expect 5 or more years of total watchmaker experience but not a deal breaker. The candidate we imagine will make a starting salary of $75k/yr and we will reach bonuses to take them to $90k+. If this sounds like you please apply. If you don't meet the years of experience requirement, reach out anyways as we may still have an open position available for someone in their early stages of their watchmaking career. If we sound like a fit for you, we are truly happy to welcome you to our team! -Mike \nCompany Description Works is regarded as one of the top independent service and restoration shops in the country. We are a low volume, boutique repair shop catering to some of the top collectors in the world. You won’t find any jewelry or watch display cases we are strictly service and restoration. We are looking to assemble an All-Star team for our new facility located at the luxurious One Flagler Building in downtown Miami Works is regarded as one of the top independent service and restoration shops in the country. We are a low volume, boutique repair shop catering to some of the top collectors in the world. You won’t find any jewelry or watch display cases we are strictly service and restoration. We are looking to assemble an All-Star team for our new facility located at the luxurious One Flagler Building in downtown Miami

Weekend Shift/ Night Shift36-Hour Work Week Paid for 40 Hours- Weekends 53 hour week Weeknights $1.20 Per Hour Shift Differential for Nights Friday- Sunday 5 AM- 5 PM or 5 PM- 5 AM Night Shift Monday- Thursday 5PM- 5AM Double Time After 50 hrs. Worked! At Veritas Steel, we’re leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by performing their job to the best of their ability, as well as people who enjoy fun and hard work. Ready to leave your legacy? Join the Veritas Steel team today! Welders employed at Veritas Steel's Palatka location are responsible for performing FCAW & SMAW processes to codes, and standards, including repairs and miscellaneous tasks as assigned by Shop Supervisor. They must be able to meet high production demands in a timely manner and complete high-quality work with expertise. Welders must also adhere to company policies to ensure a safe working environment. Principle Duties and Responsibilities: • Uses proper safety equipment to ensure surfaces are adequately prepared for all operations:, • Air arc, Grove Welds, Flex Core, Full Pin, • Using correct procedures to obtain proper weld profile, etc.,, • Understands general knowledge of welding codes and welding tools, • Proper preparation, cleaning, and setup, • Hand torch – setup and use, • Understand basic weld symbols/gauges, • Maintains shop, equipment, tools, vehicles, etc. for the purpose of ensuring the availability and functioning of required items and ensuring safety, • Coordinates with shop supervisor and other personnel for the purpose of completing projects/work orders efficiently, on time, and with no defects, • Adheres to safety policies to ensure a safe working environment for oneself and surrounding coworkersKnowledge, Skills, & Abilities:, • High School diploma or GED, • Must be able to read, write, and comprehend English, • Need to be able to read metric tapes, • Able to adapt to work priorities, communicate well, meet deadlines and schedules, and work as part of a team, • Commitment to work safety and actively participating in our safety culture, • Commitment to attendance policy and procedures, • Quality, accuracy, thoroughness, and reliability of work performed, • Willingness to learn and contribute to the success of your team, • Welding experience is preferred but not requiredPhysical Requirements:, • Able to lift 40 pounds and carry 30 pounds, • Must be able to push /move objects up to 50 pounds of force, • Pulling requirements up to 122 pounds of force, • Necessary to stand, walk, stoop, and kneel up to 99% of the shift, • Must have a good range of motion when reaching forward, shoulder to overhead, and bending, • Agile fingers and thumbs on both handsWorking Conditions:, • Work is performed indoors in a large warehouse or outside in all weather conditions, • There is regular exposure to dirt, dust, paint fumes, noise, moving equipment, heavy steel & other possible hazardous conditions, • Safety glasses, hearing protection, hard hats, and steel-toed boots are required; a respirator is required for specific operations Compensation details: 19.45-22.16 Hourly Wage PI1e256f658034-26276-41739330

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay, • Career AdvancementJob Summary We are seeking a skilled TIG Welder to join our team. In this position, you will interpret blueprints and drawings to accurately weld structural components and parts. This is an integral part of the construction process, as it provides a strong infrastructure foundation. The ideal candidate is a hard worker with great attention to detail and proven experience as a Welder. Responsibilities • Read and interpret blueprints, drawings, and schematics, • Plan layout and measurements of structural components, • Interpret requirements to select the most appropriate welding equipment for the job, • Operate angle grinders, calipers, rulers, and other hand and power tools, • Use manual and semi-automatic welding equipmentQualifications, • Previous experience as a Welder, • Professional Certification (AWS welding certificate) is preferred, • Experience with a variety of welding equipment and tools, • Ability to read and interpret blueprints, schematics, and other technical documents and drawings, • Understanding of all health and safety guidelines, • Attention to detail

Job Description Position Description: Rosenblad Design Group (RDG) a manufacturer of evaporation and crystallization systems, is seeking several Fabricators / Welders to join our production team. The individuals will participate in partial and full system and equipment fabrication. The ideal candidates will have a minimum of ASME welding experience 3 years’ experience as a combination GTAW and GMAW welder. Individuals must pass a pre-hire ASME Section 9 welder certification test. A GTAW tests will be a stainless pipe with a wall thickness of .343 welded in the 6G position. Primary Duties and Responsibilities: · Willingness to cross-train and perform the work of other job tasks in addition to the primary assigned position. · Operate forklifts, overhead crane, hand power tools, slings, grinders, plasma cutter, and other hand tools. · Keeps equipment and work area clean and orderly. · Perform both GTAW and GMAW welding on large stainless steel components to ASME section 9 code requirements. · Ability to follow a Welding Procedure Specification (WPS) for TIG and MIG welding 304L, 316L, 2101 Duplex, 2205 Duplex and additional higher alloys. · GTAW weld Stainless Steel in the thickness range of .036 to .500 inch. · GMAW welding Stainless Steel in the thickness range of 5/8 up to 1 inch. · Ability to read and follow shop drawings, sketches, production drawings, welding symbols. · Comfortable welding at times above ground from a man lift. · Insuring that all material surfaces to be welded are clean and free of dirt, oils, paint, slag and other contaminants. · Inspect and correct welds as necessary to meet product specifications. · Detect faulty operation of equipment or defective materials and notify supervisors. · Monitor the fitting and welding processes to avoid warping, shrinking, distortion. PHYSICAL REQUIREMENTS: • Standing, • Walking, • Pulling and Pushing, • Carrying, • Grasping, • Reaching, • Stooping and Crouching, • Welding Color Determination, • Near Acuity, • Occasional lifting 50 lbs.WORK ENVIRONMENT:, • This position requires work in a manufacturing environment facility and occasionally at field locations for installations., • The employee is occasionally exposed to fumes or airborne particles.SAFETY: Perform all duties in a safe and efficient manner according to company and OSHA safety guidelines. Wear the proper personal protective equipment and use safe work habits. Rosenblad has a zero alcohol and drug tolerance policy. EDUCATION: High school diploma or GED plus three years related work experience with ASME section 9 code as a combination welder. Completion of formal welding apprenticeship program is highly desired. Previous work history and employer references will be required. Schedule: Full Time / First Shift: 6:00am to 2:30pm (M-F) –position will be located at our facility in Yulee, FL. At times longer work hours and potentially some weekend overtime might be required to meet project deadlines. Compensation: To be determined based on applicants qualifications Job Type: Full-time Pay: $20.00 - $25.00 per hour Expected hours: 40 – 80 per week

Job Description Genesis Technical is seeking a Girth Welder for a direct full time position in Panama City, Florida Summary/Objective Perform girth welding on the inside diameter of the pipe for production. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The following essential functions are to be performed in accordance with the Standard Operating Procedures (SOP) and Job Safety Analysis (JSA) established for this position and will be performed on a continuing basis during the work shift. • Complete related checklists every shift., • Record data in the I5 system., • Perform set up tasks and checks including but not limited to: ensure correct wire will be used; ensure welding wire and pointer are aligned with the center of the weld seam bevel., • Ensure the welding parameters are set properly to begin welding process., • Operate the roll lines to position pipe properly. Mark weld’s starting position with soapstone., • Perform ID welding process per SOP., • Ensure pipe has maintained the weld’s interpass temperature of 250?, • Ensure all functions are working properly. Ensure proper weld alignment., • Change wire as needed. Maintain an adequate supply of wire., • Remove slag from weld seam bevel and boom support wheels., • Assist in all clamp changeovers., • Perform TPEM operator tasks., • Perform area housekeeping tasks, • Perform other duties as assigned. Skills and Abilities • Use of effective interpersonal skills., • Ability to work independently or in a team environment., • Understand written sentences and paragraphs in work related documents., • Basic mathematical ability., • Speak clearly to others to effectively convey information., • Attention to detail and pride in completed work product. Supervisory Responsibility This position has no supervisory responsibilities. Work Environment While performing the duties of this job, the employee is frequently exposed to fumes, airborne particles, moving mechanical parts, moving vehicles, and vibration on the production floor. The employee is occasionally exposed to a variety of extreme conditions, including high and low temperatures. The employee may have exposure to chemicals, slippery or uneven walking surfaces, and the potential of electrical shock. The noise level in the work environment can be loud and subject to the company’s hearing conservation program requirements. This position works in an environment in which safety demands constant attention; and requires safety equipment such as hardhats, safety glasses, earplugs and steel toe shoes. Physical Demands While performing the duties of this job, the employee is regularly required to talk or hear, sit, stand and walk, reach with hands and arms, use hands to grasp or feel; and occasionally required to stoop, kneel, crouch, climb or balance. The employee may lift items up to 40 pounds on a frequent basis and up to 50 pounds on an occasional basis. Specific vision abilities required by this job include close vision, distance vision and depth perception. Position Type/Expected Hours of Work This is a full-time position. Standard days and hours of work may span during the week from Monday through Saturday, with the schedule determined by the supervisor. Rotating evening or weekend shift work may be required, based on operational need. Travel No travel expected for this position. Knowledge Required Basic mechanical understanding Required Education and Work Experience • High school diploma or equivalent. Preferred Education and Work Experience Prior experience in a heavy manufacturing environment. Additional Eligibility Qualifications None Work Authorization/Security Clearance (if applicable) TWIC eligibility Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time. Genesis Staffing provides equal employment opportunities (EEO) to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Genesis Staffing and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://gtstaffing.com/privacy-policy/ \nCompany Description At Genesis, we love people. Our mission is to be a blessing in all we do while putting people to work. We specialize in partnering with candidates and clients to bring the right people together to accomplish great things. Genesis Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Genesis Staffing and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://gtstaffing.com/privacy-policy/ At Genesis, we love people. Our mission is to be a blessing in all we do while putting people to work. We specialize in partnering with candidates and clients to bring the right people together to accomplish great things.\r\n\r\nGenesis Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.\r\n\r\nBy applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Genesis Staffing and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at https://gtstaffing.com/privacy-policy/

Indiantown, Florida - Posted on September 29, 2026 Published By Daniel Barnes Trillium Construction is now seeking GTAW Boiler Tube Mirror Welders for a long-term project at a natural gas plant in Indiantown, FL. This position will involve performing GTAW/TIG mirror welding on boiler tubes in tight and restricted spaces during outages. When welding is not required, employees will assist the crew with other maintenance-related tasks, including millwright work, structural welding, pump replacement, and general plant maintenance. This position will provide constant work through the fall of 2027, with a minimum of 50 hours per week. Employees will have the potential to work up to 72 hours per week during scheduled shutdowns at the facility. Pay for this position is $34-$37/hr plus $90/day per diem. Candidates must be experienced with mirror welding and comfortable working in confined and difficult-to-access areas. Welders will be required to pass multiple weld tests, including a 2" carbon steel 6G TIG root with 7018 fill and cap, a 2" carbon steel 2G restricted coupon completed using a mirror, and a 2" stainless steel 6G coupon. Candidates must be available to start ASAP and must pass all required pre-employment screenings. Trillium has been recruiting and placing professionals for over 30 years. From Fortune 100 companies to small businesses, our philosophy remains the same: to achieve excellence by providing quality employees and an uncompromising level of service. We believe in honesty, integrity, and a simple philosophy of providing value to our customers and our employees. We strive to be unsurpassed in the recruitment and placement of quality and skilled professionals. Trillium is an Equal Opportunity Employer. Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for the employers and the California Fair Chance Act. By applying to this job, I agree to receive electronic communications including SMS text and email regarding future opportunities, referral bonus incentives, and other promotions from Trillium. You may opt out at any time from future communications by responding STOP to any electronic communication. You may view our full privacy policy at https://trilliumstaffing.com/jobs/privacy/. Trillium offers a comprehensive benefit package that includes the ability to participate in health insurance and retirement plans, paid holidays, state required leave, and other leave, if applicable. Trillium's offerings are dependent on the state in which the assignment is located, length of time worked, and may change depending on assignment. Benefit packages for direct hire placements vary based on the client company.

Harmar is a leading manufacturer of wheelchair lifts for automobiles, stair lifts for the home, and residential and commercial vertical platform lifts. We are an organization that is inspired by those who are mobility challenged and is driven to create mobility and accessibility products that allow people to go where they want, when they want, how they want. Ultimately our products give people access to their homes and allow them to become more mobile. We say, "We Lift Lives". Harmar has proudly been recognized as a "Great Place to Work" two years in a row - by Great Place to Work® US. We are currently looking for an experienced & certified MIG Welder to join our organization. The manual welder is responsible for using TIG/MIG welders and welding using supplied blue prints. Requirements: • Minimum two (2) years welding experience, • Must be certified in MIG welding, • Building a product that meets the quality inspection standards and tolerances, • Document defective materials as trained by the quality team, • Report inventory issues to purchasing, production supervisor and/or inventory analyst, • Responsible for area safety goals, • Other duties as assigned Harmar Mobility and all subsidiaries is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, ancestry, religion, orientation, age, sex, marital status, national origin, disability, genetic information, or veteran status. Harmar Mobility is a drug-free workplace. Must be able to pass a national background check.

Location: Ocala, FL (On-Site) Schedule: Mon-Fri 6:25 AM-Finished (Overtime, including weekends is possible and mandatory if scheduled) Pay Rate: $20/HR + We are looking for a skilled and dependable welder to join our team. This is a hands-on role where you'll cut, shape, and assemble steel components using a variety of welding techniques, shop equipment, and hand tools. Recent 2 years welding experience. Key Responsibilities • Perform MIG and stick welding on a variety of steel components, • Cut and prepare materials using oxy/acetylene torch and plasma cutter, • Use shop equipment and hand tools to complete fabrication and assembly tasks, • Read and follow basic fabrication instructions and measurements, • Inspect work to ensure quality and accuracy, • Maintain clean, organized, and safe work areas, • Follow all safety guidelines and contribute to a strong safety culture Qualifications • 2 years recent experience with MIG welding required; stick welding experience preferred, • Proficiency with hand tools and standard fabrication shop equipment, • Ability to safely operate oxy/acetylene and plasma cutting equipment, • Strong attention to detail and workmanship quality, • Ability to work independently and as part of a team, • Reliable, punctual, and safety-minded This position requires the ability to pass a drug test and background check

Thalle Construction Co., Inc. is pleased to announce a career opportunity for a HDPE Pipe Fitter and Welder on the Central Everglades Planning Project (CEPP) Everglades Agricultural Area (EAA) A-2 Reservoir in Palm Beach County, Florida. This project marks the largest contract in the Jacksonville District’s history, valued at $2.87 billion. Thalle will oversee the construction of a 17.75-mile embankment dam and associated structures. This project offers potential Project Team members a valuable opportunity to broaden their professional experience and advance their careers throughout its duration. The CEPP plays a vital role in Everglades restoration, aiming to enhance ecosystem health, improve water storage, and increase resilience to climate change. Thalle, established in 1947, is a heavy civil construction company with a corporate office located in Hillsborough, NC and a regional office in Alvarado, Texas. Thalle currently has active heavy civil construction projects spanning from New York to South Florida to Texas and continuing to expand our geographical footprint. Our diverse and expansive project scope of heavy civil infrastructure projects incorporates all degrees of civil construction that includes but is not limited to; Conventional Concrete, Roller Compacted Concrete and Earthen Dams, Navigational Waterway Locks, Reservoirs, Large Diameter Underground Utilities, Treatment Facilities, Landfills, Site Work, Mass Soil & Rock Excavation, Coal Ash Closures, DOT Highway & Bridge Construction, and on demand emergency services, etc. We are a proud representative of The Tully Group (Tully) who was established in 1921 and developed into one of the nation’s largest privately held, family-owned construction firms. Tully’s corporate office, located in New York City, has provided an opportunity to develop and sustain a long history of heavy civil projects in the Metro New York Area and New Jersey. Visit www.tullygroup.us for more information. Safety is our TOP priority! Thalle offers a competitive salary package with a full range of benefits, including Major Medical, Dental, Vision, Short and Long-Term Disability, generous PTO, paid company holidays, Life Insurance, and 401K with a company match, and more! Compensation is based on experience and qualifications. Thalle is an Equal Opportunity Employer, E-Verify, and Drug Free Workplace. Location: South Bay, FL Pay: Competitive compensation package based on experience. Essential Duties and Responsibilities: • Install, lay out, align, and assemble HDPE (polyethylene) pipe ranging from 8” to 22” diameter in accordance with project specifications and manufacturer requirements., • Perform butt fusion and/or electrofusion welding of HDPE pipe using approved fusion equipment and procedures., • Safely operate and maintain HDPE pipe fusion machines, generators, facing tools, heaters, and related equipment., • Read and interpret project drawings, fusion logs, and manufacturer fusion parameters to ensure proper installation and weld integrity., • Conduct fusion welds that meet or exceed quality standards, including visual inspection and documentation requirements., • Assist with trenching, bedding, pipe placement, tie-ins, and backfill operations as required., • Follow all company safety policies, including taking specific action to avoid other workers, equipment, and potential obstructions., • Maintain a clean and organized work area and properly store tools and materials., • Perform routine inspection and basic maintenance of fusion equipment and tools., • Work collaboratively with crew members, foremen, inspectors, and other trades to meet production schedules., • Be willing and able to perform general manual labor when not actively fitting or welding pipe., • Conduct all work with 100% integrity, professionalism, and commitment to quality. Education and/or Work Experience Requirements: • High school diploma or equivalent., • Minimum 3–5 years of experience installing and welding HDPE pipe in heavy civil, utility, or infrastructure projects., • Demonstrated experience fusing HDPE pipe in the 8”–22” size range., • Must be certified in HDPE pipe fusion (butt fusion and/or electrofusion) by a recognized manufacturer or training provider (e.g., McElroy or equivalent)., • Ability to read and follow written and oral instructions, including fusion procedures and safety guidelines. Physical Requirements: • Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials., • Work long shifts with non-standard break times., • Work in a variety of weather conditions with exposure to the elements., • Must have good hand-eye coordination, quick reaction times., • Able to work in confined or enclosed spaces., • Able to sit for long periods of time., • Able to wear a hard hat, safety glasses, gloves, and safety-toed boots., • Able to walk moderate distances to reach work area (1/2 mile or more), • Able to Enter the cab of a vehicle that is 3.5 feet (or more) off the ground., • Able to sit in the operator’s seat of equipment and safely reach all pedals, switches, levers, buttons, etc. required to safely operate the equipment (if authorized for that piece of equipment), • Capable of sitting in the operator’s seat of equipment and have an adequate field of vision of all instruments, gauges, warning lights, as well as an acceptable field of vision out of the windows and/or mirrors (if authorized for that piece of equipment), • Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards., • Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards, • Must be able to talk, listen and speak clearly on telephone

Cape Canaveral, FL SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. LEAD WELDER (STARSHIP LAUNCH HARDWARE) – MULTIPLE SHIFTS RESPONSIBILITIES: • Lead a team of welders during build and repair operations for launch, recovery, and post-launch refurbishment, • Lay out, fit, and fabricate metal components to assemble structures, launch component supports, and pressure vessels, • Lead contract welders when job size and schedule require increased team sizes; train and monitor the work quality of contractors, • Orient new team members and assign/reassign tasks; assist in scheduling daily work assignments and inform others of work procedures to ensure performance standards are met, • Assist the supervisor in coaching, mentoring, and training team members, • Communicate with the team on assignments, projects, problems, deadlines, and issues for review, • Problem solve and collaborate on SpaceX tasks and assignments, • Ensure that all welding staff members follow the proper weld procedure, • Provide information on material and rod size, and accurately assess material needs for each welding project BASIC QUALIFICATIONS: • High school diploma or equivalency certificate, • 5+ years of structural fabrication and welding experience, • 3+ years of piping system or pressure vessel fabrication experience PREFERRED SKILLS AND EXPERIENCE: • 5+ years of leading small teams of people, • 5+ years of experience welding on steel, aluminum, and stainless-steel projects, • 5+ years of experience in layout and fabrication experience, • Knowledge of TIG welding processes, • Experience working with overhead cranes and forklifts, • Proficient in blueprint reading and layout, • Proficient in plasma cutting and oxyacetylene cutting, • Proficient in Flux Cored Arc Welding (FCAW), Gas Metal Arc Welding (GMAW), Gas Tungsten Arc Welding (GTAW), and/or Shielded Metal Arc Welding (SMAW) ADDITIONAL REQUIREMENTS: • Ability to pass Air Force background checks for Cape Canaveral and Vandenberg, • Must be available to work all required shift hours and be available to work overtime and weekends as needed, • 1st Shift: 6:00am - 6:30pm Wednesday - Saturday or Sunday - Wednesday, • 2nd Shift: 6:00pm - 6:30am Wednesday - Saturday or Sunday - Wednesday, • Must be able to travel – up to 25%, • Must be able to perform the following functions: standing, lifting, and carrying moderately heavy materials or equipment up to 25 lbs. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

We are seeking a skilled welder to join our team. In this position, you will weld and fabricate on various construction equipment and assets that correlate with our heavy civil and underground utility construction company. This is an integral part of our construction business. The ideal candidate is a hard worker with great attention to detail and proven experience as a welder. Duties include but are not limited to: • Conduct welding operations in accordance with specifications and industry standards, ensuring compliance with quality requirements., • Select and set up welding equipment, • Use manual and semi-automatic welding equipment, • Operate angle grinders, calipers, rulers, and other hand and power tools, • Attention to detail, • Complete daily maintenance and repair logs and all service records, • Maintain and secure welding equipment and work tools, • Clean and maintain work area and clean equipment after repair removing grease, fluid spills, and smudges, • Turn off and lock out equipment when not in use and install tags, • Working in shop as well as onsite, • Must be able to understand work directions and communicate effectively with job site supervisors and fellow employees, • Work in accordance with the Company Safety Program and bring to the attention of the foreman any safety violations or concerns

Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. As a welder on the launch team, you will fabricate, fit, and weld piping systems that support the Terran R launch site, including process piping, utility systems, and ground support infrastructure. This role works with engineering, fabrication, construction, and operations teams to install piping systems safely, accurately, and in accordance with applicable drawings, procedures, and specifications. • Read and interpret engineering drawings, piping isometrics, fabrication prints, weld procedures, and specifications to support fit-up, fabrication, and installation work., • Fit, fabricate, and weld piping systems and mechanical assemblies using welding processes such as TIG, MIG, FCAW, and stick welding., • Perform pipe welding on carbon steel, stainless steel, and other applicable alloys in shop and field environments., • Prepare, align, and install piping systems to meet fit-up, weld quality, and project specification requirements., • Operate fabrication equipment and hand tools, including grinders, beveling tools, saws, pipe preparation equipment, and cutting tools., • Support system installation, testing, and field integration activities in coordination with mechanical, construction, and engineering teams., • Collaborate with management and engineering teams to improve safe, efficient, and repeatable fabrication, welding, and installation processes., • Follow safety, quality, and workmanship standards while supporting project schedules and launch site operational needs., • Perform launch site, fabrication, and welding-related tasks as assigned., • 5+ years of professional welding and fabrication experience, including experience with pipe welding and industrial systems., • Experience using multiple welding processes, such as TIG, MIG, FCAW, and stick welding., • Experience reading and interpreting isometric drawings, blueprints, weld procedures, and welding symbols., • Experience fitting, fabricating, and installing piping systems or mechanical assemblies to meet applicable drawings, specifications, and quality requirements., • Experience using fabrication tools and shop equipment, such as grinders, drills, saws, and pipe preparation tools., • Experience operating equipment such as forklifts, reach lifts, man lifts, or similar equipment., • Ability to perform welding and fabrication work in an active construction or industrial environment, which may include lifting up to 40 pounds and using required personal protective equipment. Nice to haves but not required: • AWS, ASME, or equivalent welding certification., • Experience welding carbon steel, stainless steel, specialty alloys, or similar materials., • Experience working in aerospace, power generation, shipbuilding, petrochemical, heavy industrial, or similar environments., • Experience supporting field construction, commissioning, launch site operations, or other safety-critical installation environments. Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Cape Canaveral, Florida. At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! Hiring Range: $33.20 - $49.80 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of Blue Origin Operations, which is comprised of Integrated Supply Chain, Test Operations, Safety, Quality, and Mission Assurance. This includes Manufacturing and Supply Chain support across all Blue Origin facilities. As a Welder/Laser Operator at Blue Origin, you will support advanced manufacturing operations by performing precision welding processes on aluminum, steel, and alloy parts and assemblies to rigorous aerospace tolerances. Your work will involve utilizing a variety of welding metals, alloys, and cutting-edge techniques—including orbital tube welding, TIG, and automated processes such as Variable Polarity Plasma Arc (VPPA)—to fabricate and assemble critical hardware. You will blend and prepare metallic surfaces for welding and non-destructive evaluation, ensuring stringent quality, safety, and cleanliness standards are met in every step. This position calls for expertise in reading blueprints, operating precision measurement tools, and maintaining an organized, compliant workspace. Position Specific Details • Shifts: A | Mon-Thurs. (5am-3:30pm), B | Mon-Thurs (3pm-1:30pm), C | Fri-Sun (5am-5:30pm), D | Fri-Sun (5pm-5:30am), • Location: Space Coast, FL, • Relocation: Available Key Responsibilities • Perform welding processes - including orbital tube welding (OTW), TIG welding, and automated welding methods (VPPA) - on aluminum, steel, and alloy aerospace components to specified tolerances and quality requirements., • Read and interpret blueprints, technical drawings, and welding procedures to execute precision fabrications and assemblies., • Prepare and blend metallic surfaces using hand tools for welding and non-destructive evaluation, ensuring optimal cleanliness and fit-up., • Fabricate jigs, fixtures, and metallic sub-assemblies in adherence to aerospace standards., • Use precision measurement tools (calipers, height gauges, portable CMMs, etc.) to verify accuracy and quality in completed work., • Conduct basic troubleshooting and preventative maintenance on welding and laser equipment., • Maintain a clean, organized, and compliant work environment, strictly following safety, cleanliness, and 5S protocols., • Collaborate with other team members and cross-functional groups to optimize processes and workflows, sharing best practices and supporting continuous improvement., • Document work performed and communicate findings to engineering and quality teams. Team Focus & Domain Expertise The Welder/Laser Operator team at Blue Origin specializes in advanced welding and fabrication for aerospace structures, bringing mastery in orbital tube welding, TIG, VPPA, and related processes. Team members possess strong capabilities in tube bending, facing, cleaning, and precision measurement—contributing to the assembly, refurbishment, and integration of complex hardware for flight and non-flight systems. A culture of rigorous cleanliness, safety, and continuous improvement underpins all collaborative efforts. Minimum Qualifications • High school diploma or GED, plus trade school degree, or equivalent years of relevant experience., • Experience performing various welding techniques (orbital tube welding, TIG, automated welding processes such as VPPA) on metals/alloys used in aerospace applications., • Certification in welding (e.g., AWS Certified Welder) or equivalent., • Ability to read and interpret blueprints and technical documentation., • Proficiency in using measuring tools including calipers, height gauges, and similar precision equipment., • Basic understanding of metallurgical principles and welding processes., • Ability to lift 50lbs and work at heights (stands, ladders, lifts) and/or in confined spaces., • Proficiency with digital tools, including Windows and Microsoft Office applications., • Must be a U.S. citizen, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Preferred Qualifications • Advanced industry certifications, trade school training, or degree in a related field., • Extensive experience in aerospace manufacturing environments and complex assembly., • Expertise in fabricating jigs and fixtures for precise hardware builds., • Advanced knowledge of tube bending, facing, cleaning, and weldment preparation techniques., • Strong problem-solving skills and ability to effectively troubleshoot and resolve complex technical issues., • Familiarity with aerospace cleanliness standards and compliant workspace maintenance., • Lean Manufacturing and/or Six Sigma certification., • Willingness and ability to work overtime when required., • Ability to work A, B, C or D shift as necessary If this role excites you but you don't meet all the qualifications, we still want to hear from you — the right attitude and drive can go a long way. Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Benefits • Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program., • Stock Options for all regular employees (working at least 20 hours/week), • Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays., • Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see here. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at EEOCompliance@blueorigin.com. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Performs preventive maintenance inspection (PMI), troubleshoots, repairs, and rebuilds major components on compactors and containers. Ensures accurate diagnosis and effective repair and/or replacement of components. II. Essential Duties and Responsib Welder, Senior, Shop, Maintenance Supervisor, Welding, Manufacturing, Repair

Location: Cocoa, FL Job Type: Contract to Hire Shifts: 1st & 2nd Shift Starting Pay: $24.00/hour, higher depending on experience 2nd Shift Differential: +$3.00/hour We are looking for experienced Structural Steel Welders/Fabricators to build and assemble steel components in a production fabrication shop. This hands-on position involves working from drawings, preparing and fitting steel, checking dimensions and alignment, and completing structural welds. Responsibilities • Review blueprints, fabrication drawings, and technical specifications before beginning work., • Measure, mark, cut, fit, align, and assemble structural steel components., • Perform structural steel welding according to project requirements and applicable standards., • Set up and operate fabrication machinery, equipment, and hand tools., • Work with oxyacetylene torches, plasma cutters, drill presses, angle presses, jigs, tape measures, and squares., • Set up and operate a track torch when required., • Inspect dimensions, fit-up, alignment, and completed assemblies for accuracy., • Make necessary adjustments to ensure proper fit and quality., • Maintain a clean and organized work area., • Follow shop safety procedures and required workplace practices., • Coordinate with supervisors and other fabrication team members to meet production schedules. Required Qualifications • Previous experience in structural steel welding, fitting, or fabrication., • Ability to read and understand blueprints and technical drawings., • Hands-on experience measuring, fitting, aligning, and assembling structural steel., • Knowledge of welding processes, fabrication machinery, and shop tools., • Strong attention to detail and ability to maintain accurate dimensions., • Reliable attendance and commitment to workplace safety., • Ability to work efficiently in a production-focused fabrication environment. Preferred Qualifications • Flux Core welding experience., • Ability to successfully pass a Flux Core welding test., • Experience setting up and operating a track torch., • AWS or other welding certifications.

Company Name: Mitsubishi Power Americas, Inc. Location: Orlando, FL, US, 32809 Blader-Welder I, Field Outage Services At Mitsubishi Power, we're not just building better clean energy technologies; we're architecting a better future. Our team is boldly redefining power generation to accelerate the world's energy transition. We operate as one team, pushing toward our vision of the future. We value problem solvers, prioritize collaboration, and support each other in an inclusive culture built on accountability and authenticity by demonstrating our values: Safety, Family, Innovative, Inclusive, Accountable & Courageous. Together, we're building the future we all aspire to - making net zero a reality. Role Overview The Blader-Welder I, Field Outage Services is an entry-level role focused on repairing Steam and Gas Turbine components. This position sets up and operates welding equipment (SMAW, GTAW, Plasma, SAW), reads and interprets technical drawings, and supports turbine blade removal, replacement, and diaphragm restoration. This role involves hands-on technical work, precision measurement, travel to job sites, and occasional access to nuclear facilities. The ideal candidate is mechanically inclined, able to interpret technical data, and eager to grow their welding expertise. Key Responsibilities • Demonstrates our core competencies: action oriented, change champion, customer-focused, developing self & others, and ownership, • Set up and operate welding equipment for SAW, GTAW, SMAW, and plasma welding methods, • Set up and operate portable welding equipment, • Restore steam turbine diaphragms to blueprint specifications, • Remove and replace steam turbine blades (rotating and stationary), including tenon peening and shroud assembly, • Perform air baffle modifications and replacements, • Measure and repair compressor hook fits, • Use precision measuring tools (OD/ID micrometers, dial indicators, dial calipers), • Conduct dimensional inspections on various products, • Clean machines, tooling, and parts; perform preventive maintenance as assigned, • Read and interpret technical drawings and blueprints, • Support tooling, parts, and material inventory management Travel extensively (at least 70%), by land and/or air Access nuclear plants as required Obtain necessary welding certifications Perform other duties as assigned Requirements Education/Experience: High school diploma or equivalent; OR three (3) years of related experience/training; OR equivalent combination of education and experience Language Skills: Ability to read and comprehend instructions, memos, and technical documentation; ability to write clear correspondence; ability to present information effectively Math Skills: Competency in calculations required for job duties Reasoning Ability: Strong judgment based on specifications and technical requirements Computer Skills: Proficiency with email, word processing, spreadsheets, graphics, and drawings Physical & Safety Requirements This role requires regular standing, walking, bending, speaking, and hearing. Employees must frequently lift/move up to 25 pounds and occasionally up to 50 pounds. The work environment may include exposure to toxic or caustic chemicals and loud conditions. Team members must follow Mitsubishi Power and customer safety procedures, including required PPE such as hard hats, safety glasses, goggles, hearing protection, and fall protection. Why Should You Apply? Excellent Benefits (Medical, Dental, Vision & 401K Matching). Excellent development programs and advancement opportunities. Tuition reimbursement and on-the-job training. Paid vacation, sick time, and holidays. Committed to quality products and services. Great working environment and culture. Employee Appreciation Programs and Event. Mitsubishi Power is an Equal Employment Opportunity (EEO) employer actively seeking to diversify the workforce and is committed to a policy of equal employment opportunity. Therefore, all qualified applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally recognized protected basis under applicable law, are strongly encouraged to apply.

Cape Canaveral, FL SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. WELDER (STARSHIP LAUNCH HARDWARE) - NIGHT SHIFTS RESPONSIBILITIES: • Weld using the flux cored arc welding (FCAW), gas metal arc welding (GMAW), shielded metal arc welding (SMAW), and gas tungsten arc welding (GTAW) processes, on carbon, stainless steel, and aluminum structural shapes, tubing and piping, • Cut, trim, fit and fabricate weldments to dimensions for building and assembling using standard tools, materials, motions, and practices of the welding trade, • Collaborate with lead welder to ensure that the proper weld procedure, type of material and rod size are accurately assessed for each welding project, • Review engineering drawings and specifications to plan welding operations where procedural information is unavailable, • Make a continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly, • Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment BASIC QUALIFICATIONS: • High school diploma or equivalency certificate, • 1+ years of experience welding in a fabrication environment with at least one of the following methods: flux cored arc welding (FCAW), or gas tungsten arc welding (GTAW) SCH 10 pipe PREFERRED SKILLS AND EXPERIENCE: • 5+ years of professional experience in GTAW welding with one or more of the following materials: SCH 10 stainless steel pipe, SCH 10 carbon steel pipe, • 5+ years of professional experience in FCAW welding with one or more of the following materials: stainless steel, carbon steel, • Previous welding qualifications qualified in accordance with one or more governing codes; AWS D1.1, AWS D1.2, AWS D1.6, AWS D17.1, or ASME Section IX, • Highly proficient in tube/pipe cutting, grinding and fabrication, • Knowledge in DC, GTAW welding techniques, and engineering requirements, • Knowledge in occupational hazards and effective safety precautions of the trade, • Knowledge in arc air procedures and equipment, • Experience in overhead cranes and forklifts, • Use of precision measuring instruments, • Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment ADDITIONAL REQUIREMENTS: • Ability to pass Air Force background check for Cape Canaveral, • Ability to work one of the following shifts:, • Sunday - Thursday, 6:00pm - 6:30am, • Tuesday - Saturday, 6:00pm - 6:30am, • Available to work all required shift hours and be available to work overtime, and weekends, as needed, • Able to lift up to 30 lbs; standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying may be required to perform the functions of this position, • Able to work outdoors, in conditions such as high heat and humidity, • Able to work at heights and confined spaces ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

Under general supervision, performs preventive maintenance services and inspects, diagnoses and repairs compactors and containers. Under general supervision, performs preventive maintenance services and inspects, diagnoses and repairs compactors and containers. • Works under limited supervision and selects from written instructions and established procedures to accomplish assigned tasks., • Performs repairs and assigned preventive maintenance services., • Performs inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems as needed., • Utilizes computer electronics systems to interpret failure modes to initiate or assign repairs., • Estimates time and material costs on compactor and container repairs and requisitions new parts., • Performs all work within Standard Repair Times (SRTs)., • Performs service calls for emergency breakdowns., • Conducts safety checks on compactors and containers., • Completes required paperwork, documenting parts usage, and accounting for repair times., • Assists senior technicians in the completion of project work., • Maintains a clean, safe work area in compliance with Corporate / OSHA Standards, and performs all work in accordance with established safety procedures. A. Required Qualifications • 2 years previous experience, • Must be at least 18 years of age and legally eligible to work in the country where the position is located, • Ability to perform physical requirements of the position with or without reasonable accommodations, • Valid Driver's License Upon Hire B. Preferred Qualifications Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Field: This job operates in both inside gas plant conditions as well as in outside conditions that include inclement weather, heat and humidity. This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing—including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing—in accordance with government regulations and company policies. At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site. WM (WM.com) is North America's leading provider of comprehensive environmental solutions. Previously known as Waste Management and based in Houston, Texas, WM is driven by commitments to put people first and achieve success with integrity. The company, through its subsidiaries, provides collection, recycling and disposal services to millions of residential, commercial, industrial, medical and municipal customers throughout the U.S. and Canada. With innovative infrastructure and capabilities in recycling, organics and renewable energy, WM provides environmental solutions to and collaborates with its customers in helping them pursue their sustainability goals. WM has the largest disposal network and collection fleet in North America, is the largest recycler of post‑consumer materials and is a leader in beneficial use of landfill gas, with a growing network of renewable natural gas plants and the most landfill gas‑to‑electricity plants in North America. WM's fleet includes more than 12,000 natural gas trucks – the largest heavy‑duty natural gas truck fleet in the industry in North America. Healthcare Solutions provides collection and disposal services of regulated medical waste, as well as secure information destruction services, in the U.S., Canada and Western Europe. To learn more about WM and the company's sustainability progress and solutions, visit Sustainability.WM.com. Equal Employment Opportunity For United States: WM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law. For Canada: WM is committed to the principle of equal employment for all applicants and employees, without discrimination on the basis of all grounds protected by applicable human rights legislation. Accommodations are available on request for candidates taking part in all aspects of the selection process. Please notify us if you require accommodation. Real ID In order to travel by air or access federal property, federal law requires individuals have a REAL ID or an acceptable alternative. This position may require the successful candidate to travel by air for business reasons or service federal property. Accordingly, successful candidates must have, or be willing to obtain, a REAL ID or TSA‑approved alternative. What is the value of a WM job? At WM we know that the value of a WM job is more than a paycheck. It's a way to create opportunities for you and your family. This is why we are constantly working to make WM a great place to work and grow a career. We Are WM is what defines the perks of being in the WM family – from benefits, to resources and engagement activities. We are People First. We are Committed to Your Growth. We Are Investing in You. We are a Family. We are Stable. We are Always Working for a Sustainable Tomorrow. • Job Identification 2351903, • Job Category Technicians, • Locations 7018 N. LECANTO HWY, HERNANDO, FL, 34442, US (On-site)

Revology Cars is hiring a Welder - Auto Body to help build reproduction 1960s Mustang automobiles. This entry-level auto body role involves welding, panel preparation, fitting, and metal finishing. PAY AND BENEFITS • $21.00–$25.00 per hour, depending on skills and experience. This is not a flat-rate job., • Monday–Friday, 6:00 am–2:30 pm., • Company-sponsored medical, dental, and vision coverage., • 80 hours of PTO accruing immediately., • 401(k) with up to a 4% company match for eligible full-time employees after 180 days. ABOUT THE JOB • Prepare, fit, and weld body panels and metal components., • Align panels, set consistent gaps, and finish metal surfaces to Revology's quality standards., • Use hand and power tools and follow work instructions., • Develop additional auto body skills as you gain experience. REQUIREMENTS • High school diploma or equivalent., • Hands-on welding experience., • Ability to follow work instructions and meet consistent quality standards., • Familiarity with Microsoft Office and ability or willingness to learn to use an iPad. ABOUT REVOLOGY CARS • We build reproduction Mustangs as properly engineered vehicles with all of the classic style and character of the original, but with the functionality of modern technology, • We are growing rapidly and provide excellent advancement opportunities for qualified team members Revology Cars is an Equal Opportunity Employer. Employment decisions are based on qualifications, merit, and business need, in accordance with applicable law.

Since 1957, LPI Corporation has manufactured products for jet engines, aircraft components, and other aerospace & defense applications. Our reputation for quality, service, and dependability has permitted us to serve many of the world's leading aerospace & defense original equipment manufacturers. The position uses hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. • Experience with and knowledge of proper clamping, holding, heat-bending, grinding, bolting and tack welding of weld components to obtain required configuration and positions for welding., • Operate manual GTAW (TIG) (Gas Tungsten Arc Welding) machines as well as their care, maintenance, and trouble shooting., • Operate Semi-Automatic GTAW welding equipment., • Operate using their experience with or knowledge of safe GTAW welding practices., • Weld sheet metal in the flat, horizontal, vertical, and overhead position., • Inspects work upon completion for any defects to comply with written specifications., • Perform layout operations, develop fixtures and select optimum welding processes., • Recognize, set up, and operate hand and power tools., • Understanding of weld schedules and weld symbols., • Utilize standard shop hand tools and measuring equipment such as, wrenches, pliers, straightedges, combination squares, scale rules, calipers, micrometers…etc., • Monitor the fitting, heating, and welding procedures to avoid overheating or warping, shrinking, distortion, or expansion of weld components., • High School Diploma or GED Equivalent, • Minimum of 5 years welding experience performing GTAW (Gas Tungsten Arc Welding) on a variety of aerospace materials such as austenitic, martensitic, and precipitation hardened stainless steels, nickel-based steels, aluminum, and titanium. Preference for NADCAP certification for aerospace welding, specifically the welding of sheet metal in the flat, horizontal, vertical, and overhead position. • Welder candidate should have experience with or knowledge of AWS D17.1-Specifications for Fusion Welding for Aerospace Applications. Language: Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to communicate orally and in writing. Mathematical Skills: Ability to use basic shop math. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Abilities: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Ability to use equipment and tools properly and safely. Special Skills and Abilities: Familiar with a variety of the field's concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. A certain degree of creativity and latitude is required. While performing the duties of this job, the Team Member is regularly required to stand, walk, bend, squat, use hands to finger, handle or feel; reach with hands and arms, and talk or hear. The Team Member must occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. May work with toxic or caustic chemicals. While performing the duties of this job, the associate is occasionally exposed to moving mechanical parts; toxic or caustic chemicals; and risk of electrical shock. The noise level in the work environment is usually moderate.

AL Remote - Pelham, AL 35124; AR Remote - Mena, AR 71953; AZ Remote - Tempe, AZ 85281; FL Remote - Tampa, FL 33602; GA Remote - Atlanta, GA 31545; KS Remote - Olathe, KS 66062; LA Remote - Ferriday, LA 71334; Luverne AL - Luverne, AL 36049 Position Type: Part Time Job Shift: Any Travel Percentage: Road Warrior Position Summary: This position is responsible to lay out, fit, fabricate, install and/or construct metal components to assemble structural forms using knowledge of welding techniques, metallurgy, and engineering requirements. Responsibilities & Expectations: • Weld parts in flat, vertical, and/or overhead positions, • Weld in all positions, vertical, horizontal, • Evaluate all engineering drawings and ensure implementation according to welding specifications, • Perform all welding work with help of forming and cutting equipment, • Provide assistance to production process wherever necessary, • Design and produce new parts according to specifications, • Perform efficient welding of various metal objects, • Perform work with help of various hand and power tools, • Analyze diagrams and specifications and cut all metal accordingly with help of cutting equipment, • Evaluate finished products and perform quality checks on products, • Administer all welding activities in a safe and efficient manner, • Assemble old units and perform modification and repair work if required, • Collaborate work with metal sheets and apply various insulation materials Read Blueprints and/or Drawings: • Use Welding material per provided drawings, • Communicate defects to manager Safety: • Attend scheduled safety meetings, • Enforce all applicable safety policies, • Maintain a safe work environment, • Promote safety among co-workers, • Participate in Behavior Based Safety program Power saws and portable grinders: • Assist in use of portable grinder, hand file, and/or scraper as necessary, • Use precision measuring tools to inspect grooves and angles Other: • All other duties as assigned Attributes: • Problem Solving – Ability to read blueprints, • Must be capable of working any shift, overtime, be on-call, or work seven days a week and travel to customer sites, • Must be able to multiple tasks with a strong sense of urgency to meet the customer needs, • Must be able to work well within a team environment and take instructions from management and co-workers, • Must be a self-starter with the ability to work independently, • Must possess the basic reading and math skills, • Strong record of attendance reliability, • Safety Oriented with the ability to work well within a team environment, • Must be capable of performing the essential job duties required of this job Physical Demands include, but are not limited to: • Must be physically able to perform work assigned, • Must be physically capable of accessing all plant locations including working at heights, • Access all areas within a site which could include heights, confined spaces, climbing ladders or stairs, and accessing tunnels, • Will be working at times in covered environment or in an outside environment, • The employee will be exposed to the following working conditions: Extreme Heat and Cold, Noise, Vibration, Oils, and Atmospheric Conditions such as Dust, Fumes, and Particles, • The employee will be required to perform the following actions (from time to time): Standing, walking, balancing, stooping, kneeling, reaching, talking, seeing, hearing and sitting, • Ability to consistently lift over 50 pounds as needed Welding skills and experience.

The Pipefitter Welder safely lays out, fits and welds fabricated materials for HVAC piping systems. Fabricates and/or assembles, installs, and maintains piping, fixtures, and equipment for gas, steam, hot water, chilled water, condenser water, lubricating, and industrial processing systems. Duties and Responsibilities: • Performs all aspects of pipe fabrication/welding., • Work with tools to complete installation of all aspects of pipe & welding pipe systems., • Inspect work in progress and completed work to insure conformance to specifications., • Lays out, positions, aligns, and fits components together. Bolts, clamps, and tack-welds parts to secure in position for welding., • Sets up equipment and welds parts using welding equipment., • Assume additional responsibilities as directed by the Foreman/Project Manager. Qualifications/Competencies: • 5+ years experience in fabricating, welding, and installation within HVAC piping systems., • Work within precise limits or standards of accuracy., • See detail in objects or drawings and recognize slight differences in shapes or shadings. Look at flat drawings or pictures and visualize how they would look as 3-dimensional objects., • Climb and maintain balance on ladders, lifts, and scaffolds: and stand, stoop kneel, or crouch., • Vocational preparation acquired in school, work, military, institutional, or vocational environment., • Knowledge of local and state codes., • Ability to read safety rules, instructions in the use and maintenance of tools and equipment, and methods and procedures in mechanical drawing and layout work., • Work within precise limits or standards of accuracy; look at flat drawings or pictures and visualize how they would look as solid objects with height, width, and depth., • Capable of exerting 20 to 50 pounds of force occasionally or 10 to 25 pounds of force frequently or greater than negligible up to 10 pounds of force constantly to move objects. Physical activity requirements are in excess of those for light work. Physically must be able to reach for, handle, and feel objects; lift objects weighing up to 75 pounds, with frequent lifting and carrying of objects weighing up to 50 pounds in a safe manner. Certification Requirements: • Welding, • OSHA 10, • Crane Rigging and Signaling, • Forklift and Other Motorized Equipment, • 6G Certified Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionBenefits: • Competitive salary, • Opportunity for advancement, • Paid time off Job Summary Fabrication Solutions. LLC. is a highly skilled, small custom metal fabrication company located in Oakland Park, Florida. We are currently seeking a welding production assistant/ "Shop Hand" to join our team! In this role, you will assist the fabricator/welder in moving material, cutting, pre and post material preparation in the fabrication process of the product. You must be able to adhere to a strict production schedule while always prioritizing safety. Responsibilities • Accurately understand a tape measure., • Adhere to a strict production schedule., • Look over products after production to ensure consistency and quality., • Time management and communication, • Proper handling of all material raw and finished., • Strong organization skills within the workplace and on job site., • Prepping and surface conditioning of material(s), • Precision cutting of steel, stainless steel and aluminum with specialize equipment (band saw, shear, torch)., • Ability to utilize and operate machinery such as a forklift., • Must be able to lift 80+ lbs., • Must clear a level II background check, • Must be an able to pass a drug test at random.Qualifications, • Previous experience in the construction/manufacturing field is a plus but not required., • Experience operating heavy machinery., • Excellent manual dexterity and vision, • Highly detail-oriented with accuracy, • Strong Communication Skills., • Creative problem solving., • Strong organizational skills., • Safety awareness, • Must be able to work in extreme conditions, • Valid Driver's License, • Strong personable skills, • Strong team player, • Desire for self-improvement and growth, • Self-motivated and integrity, • Punctuality, • General knowledge of hand tools, power tools and certain fabrication equipment, • Open minded and willingness to take direction.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology? At Pall Corporation, one of Danaher's 15+ operating companies, our work saves lives—and we're all united by a shared commitment to innovate for tangible impact. You'll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher's system of continuous improvement, you help turn ideas into impact – innovating at the speed of life. As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers solve their toughest challenges. Our products serve diverse, global customer needs across a wide range of applications to advance health, safety and environmentally responsible technologies. From airplane engines to hydraulic systems, scotch to smartphones, OLED screens to paper—everyday Pall is there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. For the exponentially curious, Pall is a place where you can thrive and amplify your impact on the world. Find what drives you on a team with a more than 75-year history of discovery, determination, and innovation. Learn about the Danaher Business System which makes everything possible. The first shift Resistance Welder I fabricates components, sub-assemblies, and final assemblies using various hand and power tools (i.e. shears, micro capacity resistance welding, die size, air ram test, scope, etc.). The work schedule is Monday thru Friday, 6:30 AM to 3:00 PM and overtime, including weekends, is routine. This position is part of the Pall Aerospace Air value stream and will be located onsite in New Port Richey, FL. This position requires access to export-controlled commodities, technical data, technology, software, and services. U.S. citizenship, U.S. legal permanent resident status, protected person status, or U.S. Government export authorization is required. Any offer of employment is contingent upon Pall obtaining the necessary employment visa and export authorization, including, if required, an export license from the applicable U.S. government agency. In this role, you will have the opportunity to: • Fabricate simple parts to blueprint and work instruction specifications and perform related tasks as requested., • Use various hand and power tools (i.e. shears, micro capacity resistance welding, die size, air ram test, scope, etc.)., • Complete all necessary paperwork as required including scorecards, hazard recognitions, routers and data. The essential requirements of the job include: • High School Diploma or equivalent (i.e. GED)., • Prior work experience reading and understanding blueprints; using measuring equipment such as calipers and drop gauges; and basic math skills., • Work overtime as assigned, including weekends. Travel, Motor Vehicle Record & Physical/Environment Requirements: • Pass visual acuity test., • Ability to bend, lift, stand, sit, and twist frequently for long periods of time and required lifting weight: 35 pounds., • Lifting frequency: Daily. It would be a plus if you also possess previous experience in: • Soldering and or resistance welding Pall, a Danaher company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it's a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at danaherbenefitsinfo.com. This job is also eligible for bonus/incentive pay. We offer comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees. Join our winning team today. Together, we'll accelerate the real-life impact of tomorrow's science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life.

Selects type and size of pipe or other related materials and equipment according to specifications. Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. Lays out, positions, aligns and fits components together in various body positions. Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. Capable of producing welds that will meet NDE (non destructive examination) requirements Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. Job Identification 32106 Job Category Trade & Craft Posting Date 09/08/2026, 06:46 PM Job Schedule Full time Locations Orlando, FL, United States Market Sector Construction Recruiting Type Trade & Craft

Ghostrock, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking a journeyman level welders capable of welding in all techniques for multiple alloys, ferrous and non-ferrous to join our team in Panama City, Florida. Position Overview: Welders will be required to perform certification tests utilizing GMAW, GMAW-P, SMAW, GTAW and STUD welding processes in the flat, vertical, horizontal and/or overhead positions as required. Must be able to obtain a Secret Clearance. Pay: $28-34/hr depending upon qualifications Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

As a Welder at Honeywell Technologies, you are helping to meet the world's rising energy demands by designing and building innovative heat exchangers. These exchangers use a liquefaction process to transform natural gas into liquid for safe and econo Welder, 2nd Shift, Operations, Welding, Manufacturing

Mid-State Metals LLC provides custom fabrication of miscellaneous and architectural metals. Serving the commercial and industrial construction industry, Mid-State Metals has built a solid reputation for managing and completing an array of projects through our commitment to safety and customer service. Mid-State Metals is a true turn-key miscellaneous metals contractor. From estimating, detailing and design, to Erection and close out, our projects are handled in-house allowing us to adapt quickly to your project needs. Our certified welders and craftsman have the ability to weld and fabricate steel, stainless steel and aluminum. Mid-State Metals LLC is centrally located in Orlando, Florida. We have the ability to ship our custom products throughout the United States. We also erect our products on job sites throughout the Southeastern US. We are seeking skilled and reliable Field Welders with current 3G/4G certifications and hands-on experience working with miscellaneous metals such as stairs, handrails and light structural components. The ideal candidate will be proficient in stick welding (SMAW), grinding, and interpreting blueprints and work instructions to complete installations with precision and professionalism. Responsibilities: • Perform stick welding (SMAW) and other welding techniques on steel, aluminum and stainless steel materials., • Grind railings, stairs and structural components according to specifications., • Operate grinders, band saws and other standard ironworker tools., • Follow safety procedures and ensure compliance with OSHA, Mid-State, and General Contractor regulations., • Travel to job sites and adapt to various work schedules as needed., • Lift and carry up to 75 pounds safely., • Collaborate with team members to complete projects efficiently and on time. Qualifications: • Certified in 3G/4G welding is preferred (company will certify also)., • Proven experience in stick welding (SMAW), particularly with stairs, railings and light structures., • Proficient in using grinders, band saws, and standard fabrication tools., • Experience with aluminum and stainless welding preferred., • Ability to read and follow blueprints., • Familiarity with construction job sites and safety protocols., • Must be dependable, team-oriented, and flexible with work hours and travel requirements. Additional Information: All your information will be kept confidential according to EEO guidelines. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance Schedule: • Monday to Friday Supplemental Pay: • Bonus pay

We are currently hiring first class fluxcore structural welders for a project in Panama City, FL. * Note this position is open to U.S. citizens or US permanent residents only due to government contract. Must pass - hands on weld test (2G, 3G, 4G) at jobsite. Lodging assistance available. Working 48+ hours - Monday - Saturday. Apply online or call/text today (281)965-2749.

This Welder Helper position supports fabrication and welding operations in a high-performance manufacturing facility focused on aerospace components for launch vehicles and ground support equipment. You assist certified welders with day-to-day tasks, help prepare materials and work areas, and contribute to producing high-quality welded assemblies. This role is ideal for someone reliable, detail-oriented, and eager to build a career in welding by gaining hands-on experience and progressing into a full-time welder position after demonstrating skill and passing required tests. Responsibilities • Assist certified welders with the setup, preparation, and execution of welding tasks to ensure efficient and accurate production., • Prepare materials for welding by cleaning, grinding, cutting, and fitting components according to specifications., • Move, stage, and organize materials, tools, and equipment safely and efficiently to support continuous workflow., • Operate basic shop tools such as grinders, saws, and measuring devices in a safe and controlled manner., • Maintain cleanliness and organization of work areas in accordance with 5S standards and company procedures., • Support weld inspections by preparing parts, assisting with measurements, and documenting work as needed., • Follow all safety protocols, including proper use of personal protective equipment (PPE) and adherence to quality standards., • Communicate effectively with welders, supervisors, and team members to meet production goals and resolve issues quickly., • Apply basic fabrication and fitting practices to support the assembly of structural and spacecraft-related components., • Handle materials and components carefully to protect equipment, maintain quality, and prevent damage. Essential Skills • At least 6 months of experience in a manufacturing, construction, or industrial environment., • Ability to use basic hand and power tools safely and effectively., • Ability to read a tape measure accurately and apply basic measurements in daily tasks., • Basic familiarity with welding environments, including working around MIG, TIG, flux core, arc, and shielded metal welding processes., • Ability to operate basic shop tools such as grinders, saws, and measuring devices., • Strong attention to detail and ability to follow instructions and safety procedures., • Physical ability to stand for extended periods, move materials, and work in a fast-paced production environment., • Reliable attendance and punctuality to support consistent production schedules. Additional Skills & Qualifications • Previous experience in a welding, fabrication, or metalworking environment., • Familiarity with MIG and TIG welding processes; hands-on experience is helpful but not required., • Experience with flux core, arc welding, shielded metal processes, and GTAW is beneficial., • Experience operating material handling equipment in an industrial or manufacturing setting., • Ability to read basic blueprints or technical drawings to understand weld and fit-up requirements., • Exposure to fabrication work related to structural steel, fittings, and spacecraft components., • Strong work ethic, eagerness to learn, and desire to develop into a skilled welder., • Completion of welding courses or training programs, especially for candidates seeking to transition into a full-time welder role. Why Work Here? You join a team that builds launch hardware for rockets in a climate-controlled, state-of-the-art facility with strong name recognition and a clear, mission-driven focus. The organization offers competitive compensation structures, including per diem for eligible roles, and provides a clear path to grow from a helper into a full-time welder after demonstrating your skills. You gain hands-on experience with advanced fabrication and welding technologies while working alongside experienced professionals who support your development in a high-performance, safety-focused culture. Work Environment The work environment is a high-performance manufacturing and fabrication facility focused on aerospace components, operating with advanced welding and fabrication technologies in a climate-controlled, state-of-the-art setting. The team currently works a schedule of 6 days per week with 11-hour shifts (6/11s), with typical hours of 6:30 a.m. to 6:00 p.m. for day shifts and 6:30 p.m. to 6:00 a.m. for night shifts. Primary shift patterns include Sunday through Thursday and Tuesday through Saturday, depending on assignment. You work around various welding roles such as structural welders, pipe welders, fitters, helpers, tool room staff, and painters, and you regularly interact with welding processes including MIG, TIG, flux core, arc, shielded metal, and GTAW. The environment emphasizes safety, use of appropriate PPE, adherence to 5S standards, and organized workspaces, with regular use of hand tools, power tools, grinders, saws, measuring devices, and material handling equipment. The facility promotes a professional, safety-conscious atmosphere where proper attire and PPE are required to perform hands-on industrial work safely. Job Type & Location This is a Contract to Hire position based out of Cocoa, FL. Pay and Benefits The pay range for this position is $20.00 - $22.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cocoa, FL. Application Deadline This position is anticipated to close on Oct 16, 2026.

CECO Environmental is a global leader in providing sustainable solutions for industrial air, water, and energy transition. Since 1966, we've been addressing the world's most pressing environmental challenges. Our mission is to protect people, the environment, and industrial equipment, making a tangible impact across industries like renewable energy, semiconductor manufacturing, power generation, and water treatment. As a purpose-driven company, we foster a culture of innovation, collaboration, and integrity, ensuring that every project we undertake creates lasting positive change. At CECO, you'll be part of a growing, dynamic team committed to a cleaner, safer, and more sustainable future. The Sheet Metal Fabricator is responsible for fabricating, assembly, install, and repair of sheet metal products and equipment. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. You will be welding in very tight confined spaces, i.e.: inside a small tank. Your Responsibilities Will Be: • Set up and operation of hydraulic press brake; forming various sheet metal and plate parts, • Set up and operation of plate rolls; material size ranges from 20 gauge to 1/4" plate., • Set up and operation of sheet metal shear. Must be able to calculate best cut to minimize scrap., • Must be able to MIG weld from 20 gauge to 3/8" plate; stainless, and carbon steel material., • Must understand or be willing to learn the forming process of various sheet metal parts such as pressed elbows, gorelocked elbows, collars, sleeves, tee branches, reducers, etc., • Must be able to weld in very tight confined spaces, i.e.: inside a small tank., • Reads assembly prints and procedures, • Other job duties as assigned. Required Qualifications: • High school diploma or GED required; Trade or Technical School Degree Preferred, • 5+ years of experience in sheet metal fabrication, • Good mechanical skills., • Basic math skills and the ability to read assembly prints and procedures., • Punctual, • Ability to work independently and self-motivated., • Team player, able to get along with a diverse group of people working towards a common goal. ADA Requirements: Positions in this function typically require typing, sitting, climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, fingering, grasping, feeling, talking, hearing, seeing and repetitive motions. • Concentrated mental and/or visual attention. The work involves performing complex tasks to very close accuracy and quality specifications, or a high degree of hand and eye coordination for sustained periods., • The job is typically performed under comfortable working conditions; any disagreeable elements are generally absent during normal performance of job., • Compliance with company attendance standards. Heavy Work: Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of forces constantly to move objects. Very Heavy Work: Exerting more than 100 pounds of force occasionally, and/or more than 50 pounds of force frequently, and/or more than 20 pounds of force constantly to move objects. Incumbents may be subjected to moving mechanical parts, electrical currents, vibrations, fumes, odors, dust, gases, poor ventilation, chemicals, oils, extreme temperatures, inadequate lighting, workspace restrictions, intense noises, and travel. The facility is not air conditioned. We Offer: We provide a variety of medical insurance plans, with dental and vision coverage, Employee 401(k), tuition reimbursement, and much more. At CECO, we are committed to a culture where every employee is valued and respected for their unique experiences and perspectives. We believe a diverse and inclusive work environment contributes to the rich exchange of ideas and diversity of thoughts, that inspires innovation and brings the best solutions to our customers. CECO Environmental is a leading environmentally focused, diversified industrial company whose solutions protect people, the environment, and industrial equipment across the globe, serving a broad landscape of industrial air, industrial water and energy transition markets. We serve these markets and our global customers through our key business segments: Engineered Systems and Industrial Process Solutions. Learn more about CECO by visiting About Us. Equal Opportunity Employer CECO is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. Accessibility Assistance or Accommodation If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: hr@OneCeco.com.