Production company jobs in Cambridge - Page 2Create job alerts

A Software Engineer with proven experience of developing software tools and scripts for production test and process automation together with strong LabView experience, will join the new Production Engineering team of an award winning Technology Company. The successful Software Engineer will focus on

Mechanical Maintenance Engineer c£37k + Bonus Cambridgeshire ABJ76511 An excellent opportunity has arisen for a Mechanical Maintenance Engineer to join a well-established engineering and manufacturing company in Cambridgeshire. This is a varied, hands-on role within a busy factory environment, working on a wide range of production and fabrication machinery. This position would suit a practical engineer who enjoys fault finding, preventative maintenance and keeping production running efficiently. While some basic electrical knowledge is useful, the role is primarily mechanically focused. Permanent position | Fully onsite / car required to get to the site Key Responsibilities * Maintenance and repair of site machinery including mills, lathes, drills and sheet metal fabrication equipment * Planned preventative maintenance and reactive breakdown support * Installation and assembly of new machinery and equipment * General site maintenance including basic electrical work and plumbing * Supporting continuous improvement and quality engineering standards across the site * Working with hand tools, polishers, heaters and general workshop equipment Skills & Experience Required * Engineering apprenticeship or equivalent hands-on training * Recognised engineering qualification (City & Guilds, BTEC or similar) * Mechanical maintenance experience within manufacturing, engineering or heavy industr...

Mechanical Maintenance Engineer c£37k + Bonus CambridgeshireABJ76511 An excellent opportunity has arisen for a Mechanical Maintenance Engineer to join a well-established engineering and manufacturing company in Cambridgeshire. This is a varied, hands-on role within a busy factory environment, working on a wide range of production and fabrication machinery. This position would suit a practical engineer who enjoys fault finding, preventative maintenance and keeping production running efficiently. While some basic electrical knowledge is useful, the role is primarily mechanically focused. Permanent position | Fully onsite / car required to get to the site Key Responsibilities • Maintenance and repair of site machinery including mills, lathes, drills and sheet metal fabrication equipment, • Planned preventative maintenance and reactive breakdown support, • Installation and assembly of new machinery and equipment, • General site maintenance including basic electrical work and plumbing, • Supp...

Socode are partnering with a Cambridge-based technology company developing advanced industrial systems used in high-performance manufacturing environments. As their programmes continue to expand, they’re looking to bring in a Senior Project Manager to drive delivery across a range of complex product and operational initiatives. This is a delivery-focused role sitting at the centre of engineering, operations and supply chain. You’ll be responsible for coordinating multidisciplinary teams, keeping programmes on track, and ensuring new products transition smoothly into manufacture. What will you be doing? • Owning delivery of new product programmes from early development through to production release • Coordinating engineering, manufacturing, supply chain and quality teams to maintain alignment and momentum • Building and managing project plans, tracking progress, and ensuring key milestones are met • Applying structured delivery frameworks to keep projects controlled and predictable • Identifying potential risks early and putting plans in place to mitigate them • Acting as the main point of contact for internal stakeholders, providing clear and regular updates • Supporting the move from development into production, including readiness and ramp-up activities • Contributing to improvements in how projects are run, helping strengthen overall delivery capability What are they l...

Production Operative Days - Linton.At Job&Talent, we are recruiting for Production Operative to work with a leading company in Food manufacturing operative in Linton.As a Production Operative Days you will need to have:.Own transport is required due to the site's location.Being available to work ful

Maintain a clean and organized work area. Benefits of working with us as a Production Operative:. At Job&Talent, we are recruiting for Production Operative to work with a leading company in the food manufacturing sector in Linton.

Senior Software Engineer - Up to £350,000 - Cambridge Title: Senior Software Engineer Company: Proprietary HFT Location: Cambridge Pay: Up to £350,000 with huge potential to increase Company: A proprietary trading firm in Cambridge, specialising in the research and development of ultra-low-latency automated trading strategies, are looking for a Software Engineer with a demonstrable background of delivering complex projects from a concept through to delivery. It is important that you have been involved in the entire software development life cycle (SDLC), as this dynamic role will require you to rapidly prototype - and ultimately move into production - highly complex, reliable and performant systems - oftentimes from scratch. Role: * Develop ultra-low-latency trading systems C++ or Rust code * Work closely with a close-knit team of Software Developers and Quant Traders * Build mission-critical research systems from scratch * This is an early-stage hire for the team. Much of your work will be completely greenfield. You will be involved in the designing, prototyping, testing and productionising new software. * Providing support to a small number of junior engineers * Whilst not a requirement, you will be given the opportunity to grow into a senior managerial role should you wish About you: * Holistic approach to problem solving; you are able to see the 'bigger picture' of...

Your new company Before applying for this role, please read the following information about this opportunity found below. Our client is a European manufacturing business that is going through a period of growth, and they have a newly created position within their manufacturing facility in Glasgow. Your new role Reporting to the Financial Controller, the Senior Yields Analyst is required to monitor and analyse production performance to ensure raw materials are converted into finished products as efficiently as possible. The role focusses on improving manufacturing efficiency, reducing waste, and supporting cost control within the factory. You will monitor raw material input versus finished product output and ensure any discrepancies are corrected within Innova in a timely manner. Manage Daily Yield meetings and hold people to account. Analyse production yield losses and identify trends. Produce daily, weekly, and monthly yield performance reports. Conduct variance analysis between target and actual yield. Prepare stock reports and yield reports for weekly accounts. Maintain accurate production and inventory data, ensuring new products are set up accurately for reporting and to correct job numbers. Identify opportunities to reduce waste and improve process efficiency. What you'll need to succeed A strong background in manufacturing. Credible experience of developing best practice models with the ability to work closely with Production Teams. A dynamic individual, with an analytical nature and proficiency in manufacturing and ERP systems. Proficiency in Power BI and Excel with strong analytical thinking and communication skills. High level of self-motivation and target-driven. Proactively seek and share solutions rather than problems. Flexible and adaptable in approach. Professionally manage workload and prioritise accordingly. Strong team ethic: communicating and liaising successfully across departments, whilst delivering individual work to a high standard. To be well-organised and a good timekeeper. A calm, self-assured and confidence-instilling manner. What you'll get in return A salary of between £40,000 and £45,000 and flexible on working hours from either or What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. xrnqpay Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be

Technical Sales Support Engineer (Mechanical Bias) Location: Cambridgeshire (hybrid) Salary: up to £65,000 + Wider Package Sector: Food Processing & Automation Solutions The Challenge I am working with a process control integrator and machine builder who predominantly work within food and beverages. This company doesn't just build and sell machines; they sell high-performance turnkey integrated solutions. We are looking for a Mechanically Biased Technical Sales Support Engineer to bridge the gap between a clients vision and a fully functioning production line. The ideal candidate is likely a mechanical mechatronics engineer who wants to work for a company that is serious about defining solutions with the customer and then delivering on that. You won't just be "supporting" sales; you will be the technical architect behind the proposal, ensuring that every conveyor, platform, and processing unit is physically viable, hygienically designed, and engineered for maximum throughput. The company want to go from £20m to £40m youll be joining a high growth, high performance team that is fully resourced to dominate their target markets. Your Engineering Pedigree Mechanical Mastery: You live in 3D CAD (SolidWorks or Autodesk Inventor). You can take a blank factory floor plan and design a complex, multi-stage processing line that respects both physics and floor-space constraints. Project Architecture: Experience managing or supporting the lifecycle of large-scale mechanical installations (from £500k to £5M+). You understand BOMs, process control, fabrication lead times, and how these things all come together. Hygienic Design: Ideally, you have a background in the food, pharma, or chemical industries. E.g. youve designed CIP for dairy. The "Technical Liaison": You can talk torque, belt speeds, and pneumatic pressures with the workshop, then pivot to explain the ROI and technical reliability to a Food Factory Manager. Safety & Standards: Deep knowledge of the Machinery Directive, PUWER, and CE/UKCA marking from a mechanical and structural perspective. What Youll Be Doing Pre-Sales Engineering: Accompanying Sales Managers to sites to conduct technical surveys and feasibility studies. Conceptual Design: Creating high-quality general arrangement (GA) drawings and 3D renders to "wow" the client during the bid process. Costing & Risk: Working with production to ensure quotes are accurate and that the proposed mechanical solution is actually buildable. Mentorship: Acting as the senior mechanical voice within the office, guiding junior technicians and refining internal design standards. The Ideal Profile Experience: You might be working on the engineering side now for a system integrator / machine builder wanting to have more of a say in how the up-front solution is designed. Mindset: You are "mechanically curious and open-minded." You want to know how to solve production challenges for customers. We may close applications earlier for this role if we find a suitable candidate. Talentometry Limited is an executive search consultancy focusing entirely on businesses utilising or developing emerging technology. Unfortunately, we are only able to consider applications from individuals who are already eligible to work in the UK. TPBN1_UKTJ

Senior Design Manager We are currently looking for Senior Design Managerto complement and support our strong pre-construction team. The role will extend (depending on projects type) to post tender design development, coordination & management of the design teams. The role will be based in our Cambridge office, covering the working area of that office of Cambridgeshire, Suffolk, Oxfordshire, Northamptonshire, Leicestershire, Buckinghamshire, Bedfordshire, Hertfordshire, down to North London. Our Pre-construction Team consist of design managers; M&E services coordinators, planners and estimators bid leaders. The successful candidate will be joining a strong dedicated group of individuals who are themselves supported by our in-house design (architectural, structural and civils) consultancy office at Thetford. The successful candidate will be joining one of the largest family run construction business dealing with a diverse range of interesting and challenging projects across multiple sectors. For this role you will need to be focused, knowledgeable of construction techniques, design standards and Building Regulations, self motivated and able to work both independently and within our team of like minded individuals. You will have excellent communication skills, both verbally and written, and you will need to hold a clean driving license and be prepared to travel throughout our operating area. The successful candidate needs to be efficient and resourceful, with an invaluable set of interpersonal and problem solving skills and the flexibility to adapt to fast paced, ever- changing environments. You need to be a conscientious, organised and pro-active team player, highly motivated and committed to achieving deadlines and always focused on the task in hand. You should be able manage and appoint design teams and manage them in the production of information through different stages of design development. The role will ideally suit someone from a design background (architectural or engineering) and also construction project management level (with significant design and build experience). The Senior Design Manger Role :- Pre-Construction Manage the design process during the tender stage, from tender to commencement on site. Understanding the design brief Chair design development meetings during the tender process Fully investigate Value engineering and value creation opportunities and work closely with the estimating and commercial team. Interrogation of enquiry documents, usually in the form of an Employers Requirements. Manage our design process via external consultants Close liaison with internal departments ensuring programming and cost management are aligned with design development. Progress design issues within a strict timescale & ensure designers meet information delivery dates. Assist in design deliverables and IRS Assist in the preparation of cost plan/affordability with PQS Attend design meetings & support the teams with construction knowledge & advice on best practice. Attend risk meetings/risk ownership & support the team with advice & best practice Attend client meetings, post tender interviews & support the team with construction knowledge in order to win the bid. Assist the estimator & commercial manager in the preparation of the cost plan, offering advice on the required design issues. Assist the estimator in preparation of sub- contractor packages for tender, advising of design requirements which are to be noted by the subcontractor in the preparation of their quotations. Review design team and Sub contractor design proposals, overmarking (red penning) and commenting on design and construction issues (Bluebeam or similar). Verify & control status of consultants and subcontractors drawings and specifications & maintain registers . Ensure the consultant scope of services, responsibilities and fees are agreed and assist in making appointments. Understand risk management and be able to management the process Understand the issues with the applicable form of contract for the project and highlight where the design process may be at risk. Construction Stages Ensure designers appointments are completed in accordance with procedures as soon as practical. Produce and monitor a design procurement programme / information release schedule Maintain a drawing and specification register as designs develops Monitor any design issues on the project risk register, Ensure architect leads the technical coordination of all design disciplines Monitor the information release schedule on at least a weekly basis and ensure this is matching the construction programme. As required, attend site progress meetings Ensure that each design consultant provides a regular design status report Ensure designers and design subcontractors produce as built information and O and M Manuals in sufficient time towards project completion Ensuring all design approvals are met to suit the construction programme Key skills required : Good organisation skills and work ethic Computer skills need to be proficient on Microsoft Office packages (preferably with experience of the 2010 suite Word, Excel, Outlook) and document management systems. Any experience with Bluebeam or 4 Projects would be beneficial but not essential (and training can be provided). Excellent spoken and written English A good, clear telephone manner is essential as there will be client interface during the course of the daily works, including Teams meetings. A good team player, able to work independently and as part of a team Have an understanding of different Client procurement routes Good communication, presentation and diplomacy skills Work as part of a team and on your own initiative Ability to meet deadlines and work well under pressure Other aspects the job offers : 25 days holiday per year plus bank holidays. Company car/car allowance Free parking Based at our Cambridge Office. Contributory Pension Scheme Hours of work 8.15am 5pm Monday to Friday. A good salary level, dependent on experience and subject to negotiation. Free access to our reward platform Flex (features discounts and cashback offers from a variety of companies and retailers).c272c101-f45c-4783-b4a0-50ad222b87c0

Mechanical Fitter (Mechanical assembler) c£32k + Bonus CambridgeshireABJ76516 An excellent opportunity has arisen for a Mechanical Fitter / Assembler with experience in hydraulicsto join a well-established engineering and manufacturing company in Cambridgeshire. This is a varied, hands-on role within a busy factory environment, working on a wide range of production and fabrication machinery. This Me...

We are currently looking for an Organic Development Chemist for a chemical company in Cambridgeshire. As a Development Chemist you will support small scale process development and scale up of fine chemicals. Responsibilities include: • Carry out small scale process development of chemicals up to 20l., • Lead projects in scale-up from laboratory scale through to production., • Complete all documentation for research development and scale-up projects., • Carry out maintenance and troubleshooting of equipment., • Work with other teams including Research, Production and Quality Control. Ideal candidates will have: A degree/ Masters (MChem, MSc, MSci) or PhD in Chemistry/ Synthetic Organic Chemistry with previous industrial experience working in a process development lab. Ideally you have experience scaling up lab process/ production and distillations up to 20L scale. The position is working 12 hour day shifts, covering Monday to Saturday. To apply for the Organic Development Chemist role please send your CV to Peter at Rowland Talent Solutions. Please note candidates need to have the right to work in the UK. Key words: Organic Chemistry, Synthesis, Synthetic, HPLC, Process Chemist, Development Chemist, R&D, Pilot plant, Process Development

Senior RF Engineer (IoT) – Cambridge | Global Tech Innovator We’re partnering with a fast-growing IoT technology company based in Cambridge, currently expanding at pace across global markets. Opportunities at this senior level are rare within the business, making this an exceptional chance to join a high-performing, innovative engineering team. This role offers the opportunity to work on one of the most advanced IoT products in the market, alongside some of the most talented engineers in Europe. You’ll be recognised and rewarded in a highly competitive, impact-driven environment. The Role As a Senior RF Engineer, you will play a key role in the design and development of RF hardware for next-generation communication devices. You’ll be involved throughout the full product lifecycle, from concept through to validation and production. Key Responsibilities: • Design and optimise RF hardware for critical communication systems, • Take ownership of RF development across the full lifecycle (concept, design, verification), • Collaborate with cross-functional teams to integrate RF solutions into complex systems, • Ensure designs meet performance, regulatory, and compliance standards, • Strong hands-on experience designing RF circuits at both board and component level, • Background in wireless/communication technologies (e.g. LTE, GSM, TETRA), • Experience with RF simulation and modelling tools such as ADS or CST, • Proven ability to integrate RF designs into multi-disciplinary systems, • Degree in Electronics, Telecommunications, or a related discipline, • Rare opportunity to join a scaling, globally expanding IoT innovator, • Work on cutting-edge products with real-world impact, • Collaborate with a top-tier engineering team in Europe, • Competitive compensation and strong recognition for performance

Production & Test Lead Technician job available in Waterbeach, Cambridgeshire A company that develops and manufactures thermal imaging equipment is currently looking for a Production & Test Lead Technician in Waterbeach, Cambridgeshire. The company, which is ISO 9001 certified and privately owned, was founded in 1982 and retains its position at the forefront of the infrared imaging industry. What you will need to apply for the Production & Test Lead Technician job in Waterbeach, Cambridgeshire: • 5 years of experience in a similar environment, • An engineering or relevant qualification, • An understanding of electronic fundamentals and fault-finding skills using test equipment e.g. oscilloscopes, • Soldering to 0201 This role would be suitable for a qualified production engineer who is thorough, possesses strong attention to detail, and can use initiative to solve problems. This role will be 5 days per week on-site.

Hygiene Operative - Linton At Job&Talent, we are recruiting for Hygiene Operative to work with a leading company in the food manufacturing sector in Linton. You will be working for the client in Linton. Shift Patterns: 9.30 PM to 6 AM 5 days out of 7 Allocated rota will be given on the induction Pay Rates: 16.67 GBP hourly As a Hygiene Operative you will need to have: Own transport required due to the client's location; no public transport available. Chemical training will be required so good English language skills will be needed Ability to follow strict hygiene protocols. As Hygiene Operative, it would be desirable to have: Adhere to the technical requirements associated with this role Experience in a similar role. Role of a Hygiene Operative: Maintain high standards of cleanliness in the production area. Operate cleaning machinery and equipment safely. Ensure compliance with food safety regulations. Support the food manufacturing operative category by ensuring a sterile environment. Benefits of working with us as a Hygiene Operative: Weekly pay. Paid holiday. Career development opportunities. Location: Linton Duration: Ongoing This is an amazing opportunity if you are looking for Hygiene Operative jobs in Linton. Sign your contract with Job&Talent for some great working benefits and professional stability. If you are looking to contact our onsite team, please visit the site locator on our website. Job&Talent do NOT charge any fees for our services. Job&Talent acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. TPBN1_UKTJ

At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity. Is your CV ready If so, and you are confident this is the role for you, make sure to apply asap. The Role We are looking forService Engineers to join our Service team in Glasgowand surrounding areas. If you have a comprehensive Lift engineering background, including an NVQ 3 in Lift Engineering or equivalent we want to hear from you! Key Responsibilities • Carrying out regular planned preventative maintenance and service visits, • Meeting agreed customer response times, building relationships with our clients, • Providing regular updates to the Service Supervisor/ Service Manager, • NVQ 3 in Lift Engineering, • Experience of working with Lifts, • Strong customer skills, • A clean UK Driving License Why Join ORONA? We offer more than just a job we offer long-term career development within a stable and growing company. What We Offer: Attractive Salary: Competitive pay that reflects your skills and experience Generous Holiday Allowance: Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidays Secure Future: Benefit from a pension scheme with increasing company contributions as you grow with us Peace of Mind: Life Inssurance to support you and your loved ones Health & Wellbeing: Medical Cash Back Plan to help with health costs, plus access to 24/7 GP services Family-Friendly Benefits xrnqpay : Enhanced leave for family-related events and emergencies Support When You Need It: Employee Assistance Programme offering confidential support for personal or work-related challenges Eye Care: Eyecare vouchers to help keep your vision sharp Recognition for Longevity: Long Service Awards to celebrate your milestones with us Referral Rewards: Earn a Recruitment Referral Fee by helping us find top talent Continuous Growth: Ongoing Training & Development opportunities to support your career journey Join ORONA and be part of a company moving the world safely and efficiently every day.

Job Title: Director Ecology & Biodiversity Do you have the skills to fill this role Read the complete details below, and make your application today. Location: Can be based from any of our offices UK Wide / Hybrid Salary: Competitive Job Type: Full Time, Permanent About us: Arthian is a group of enthusiastic and personable planners, designers, environmental consultants, engineers, and safety professionals. We have grown to employ a technical team of over 200 to include supporting professionals across Scotland, Wales, England, and Ireland. We are seeking to recruit a Director of Ecology & Biodiversity (EB) to join our growing team to lead technical excellence and business growth. We are keen to hear from applicants with a wide range of backgrounds/specialisms and would welcome applications from existing Associate Director / Director of Ecology looking for their next challenge in a values-led consultancy. This is a fantastic opportunity for the right candidate to take on a wide variety of challenges, including management of people, clients and projects, technical leadership, business development, commercial management, delivery of training etc. Please note that the company does not offer sponsorship and therefore candidates must have the legal right to live and work in the UK to be considered for this role. The Role: This role is for a Director of Ecology & Biodiversity who will have responsibility for leading and developing our ecology team across the U.K. and beyond. Responsibilities will include: • Contributing to the delivery of the company's net profit, and growth goals through co-ordinating and managing a technical business group, fit-for-purpose, aligned with the current business strategy and business plan, • You will work with our EB managers in England and Scotland to ensure technical and operational excellence across our EB group as a whole About you Qualifications: • The ideal candidate will possess a BSc and/or MSc in Ecology or related discipline and a Membership of a relevant professional body such as the Chartered Institute of Ecology and Environmental Management (CIEEM) We are keen to hear from applicants with a wide range of backgrounds/specialisms and a wide range of competencies are beneficial for this role. These may include: • Habitat survey and assessment, • Protected Species surveying, mitigation, and licensing, • Ornithological survey and assessment, • Leading and managing ecology, ornithology and ECoW teams, • Production of Environmental Impact Assessment (EIA) chapters, • Production of Habitats Regulations Appraisals (HRA) and Appropriate Assessments (AA), • Geographical Information Systems (GIS), • Ecological Clerk of Works (ECoW), construction support, and delivery of pragmatic solutions, • Ecological project management We are keen to hear how your professional experience can help us to deliver high quality ecology projects and support our team growth. xrnqpay We will expect applicants to be able to demonstrate some or all of the following: • Excellent understanding of U.K. wildlife legislation, good practice guidance for ecological surveys and assessments and the planning process across the U.K, • Strong background/specialism in one or more areas of ecological survey and assessment (e.g., plants/habitats, birds, other protected species), • Strong project management abilities across a range of project types e.g., EcIAs for development, EIAs, Construction ecological support, habitat monitoring and restoration, BNG and ESG, • Experience of reviewing and coordinating EIA chapters, • Experience of reviewing HRAs and AAs, • A successful track record of leading ecology project teams in the U.K, • Strong people and interpersonal skills to motivate and support our ecology team, • Strong report writing skills and communication with clients and other staff members, • Experience of managing frameworks for ecological services, • Experience of managing project budgets and financial reporting, • Experience of line management/ supervision of staff up to senior levels, • Health Cash Plan, • Hybrid & Flexible Working, • Competitive Salary & Annual Review, • Sponsored Company Social Events, • Salary sacrifice schemes, eg, EV, cycle to work, holiday purchase, • 33 days annual leave, • Income Protection, • Please click on the APPLY button to send your CV and Cover Letter for this role, • Please summarise what you can bring to the role and your salary expectation

Building a sustainable tomorrow BAM UK & Ireland is seeking experienced and motivated Commercial Managers to join our growing team, delivering major civil engineering projects across Scotland. Our current projects are part of the energy infrastructure sector, focused on building new substations that support Scotlands transition to net zero. In this role, you will be responsible for two major infrastructure projects within the ASTI Framework with a combined value of approx. £500m in a supervisory/supporting role, sitting above project delivery reporting directly to the Senior Commercial Manager. Please double check you have the right level of experience and qualifications by reading the full overview of this opportunity below. The position requires flexibility to work across our area offices in Inverness and Kilsyth, as well as at various project sites. Your team • A living away allowance will be provided for working away from home, along with other package benefits, • Maintain effective communications with the Framework Director, Regional Commercial Manager, and Senior Commercial Manager, in addition to project management and other associated disciplines, and enhance the profile of commercial services, • Be responsible for staff matters, which may include staff succession awareness, recruitment, development, attitude and behavioural issues, competency and retainment issues, and staff allocation, • Provide commercial contact with supply chain partners, including key supply chain management, • Ensure audits are carried out and feedback is provided to the business, • Provide commercial input to contacts with clients, and if necessary, client's representatives, • Provide commercial advice to the site team in connection with all project issues and provide input to area commercial discussions/reviews, • Take part in discussions concerning project performance and provide commercial input to project strategy, • Manage the Project Commercial Managers to ensure the production of monthly cost and value reports, quarterly forecasts, and company-tied costs., • Obtain cash-flow information and, alongside the Project Commercial Managers, present all reports. xrnqpay, • Provide support and input to dispute identification and management, • Provide support and input during negotiation of insurance claims with the insurer's representatives, • Agree terms and engage legal and commercial consultants and monitor their accounts, • Maintain contact with supply chain partners through contract vetting and input to contract documentation, • Carry out sub-contract document vetting and input to sub-contract documentationWhat do you bring to the role?, • An experienced Commercial Manager used to working with large-scale infrastructure projects with a proven track record ready for the next step up in your career, • Joint Venture experience, • Member of a Professional Institution or working towards application of the ICES, or similar, • Open collaborative approach and willing to help and assist those around you, • Educated to Degree level in a relevant Commercial, Construction or Project Management qualification (preferred but not essential)Whats in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day, • Personal and professional development

Building a sustainable tomorrow BAM UK & Ireland is looking to recruit an experienced and motivated Senior Quantity Surveyor who can strengthen our existing team on the new Fanellan substation, located near Beauly, Inverness-shire. Initially, you will be based out of our Kilsyth office, before transitioning to site during the project delivery phase where you will likely be on site a minimum of 3 days per week with the remaining 2 days at one of our head offices (Kilsyth or Inverness). A living-away allowance will be provided for working away from home along with other package benefits. This is a fantastic opportunity to be part of a high-performing team working on complex and meaningful infrastructure projects that are shaping the future of energy in Scotland. Making Possible As a Senior Quantity Surveyor, you will be responsible for the following: • Managing diverse projects, ensuring quality, timeliness, and cost-effectiveness, with an emphasis on adding value, • Collaborating in joint venture projects, building productive relationships, • Excelling in contract negotiation for optimized project profitability, • Mentoring teams and enhancing operational capabilities, • Showcasing exceptional collaboration and communication skills, • Excelling in multitasking to meet deliverables without compromising quality, • Manage, supervise and mentor your reports within the commercial structure, • Provide and control the strategy of commercial contacts with clients representatives, • Provide commercial contact with supply chain partners through pre-contract meetings, contract vetting and input to subcontract documents, • Commercial management of subcontractors, • Monitor the timely production of reliable cost performance data, • Produce and present monthly/quarterly reports, • Be responsible for the timely production of appropriate levels of applications for payments in accordance with the provisions of the conditions of contract, • Providing commercial advice to the site team and management on all contractual issues, • Successful experience as a Senior Quantity Surveyor, or at Quantity Surveyor level looking to take the next step in your career, demonstrating effective core commercial skills, • Experience of NEC forms of contract, • Demonstrable ability to mentor and coach direct reports, • Ability to xrnqpay establish and maintain collaborative relationships with the project team including the Client, Project Managers and Designers, • Have the confidence and ability to work within a team environment, and to have a positive influence on outcomes, • Relevant qualification (Degree, HNC/D) Is this your next job Read the full description below to find out, and do not hesitate to make an application. ??????? Advantageous: • Early Contractor Involvement experience, • Experience of target cost contracts, • Relevant Professional qualification (CICES/RICS)Whats in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day, • Personal and professional development

At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity. Make sure to apply with all the requested information, as laid out in the job overview below. The Role Responsible for carrying out major repairs to lifts within allocated area. Plans jobs to ensure parts are available and delivers repairs safely, on time and within budget. Responsible for the supervision and development of Repairs engineers and sub contract labour. Required to deliver accurate and timely paperwork supporting the Company's work procedures. In exceptional circumstances will stand in as part of the local service team on-call rota. Key Responsibilities Carrying out major repairs to lifts within allocated area. Plans jobs to ensure parts are available and delivers repairs safely, on time and within budget. Supervision and development of Repairs engineers and sub contract labour. Deliver accurate and timely paperwork supporting the Company's work procedures. In exceptional circumstances will stand in as part of the local service team on-call rota. What Were Looking For Senior Repairs Engineer - NVQ 3, LEIA Units 1 (Introduction to Lift Technology) Repairs Engineer - NVQ 3, LEIA Units 1 (Introduction to Lift Technology), 15 (Fundamentals of Lift Technology) Must have valid UK Driving Licence. Certified under Construction Skills Certification Scheme (CSCS) or able to achieve. Lift Maintenance: Repair supervisor or Senior Repairs Engineer - Minimum of 5 years experience, able to handle major modernisation / repairs to all lifts. If you are ambitious, safety-driven, and ready to take the next step in your lift engineering career, we would love to hear from you. Why Join ORONA? xrnqpay We offer more than just a job we offer long-term career development within a stable and growing company. What We Offer: Attractive Salary: Competitive pay that reflects your skills and experience Generous Holiday Allowance: Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidays Secure Future: Benefit from a pension scheme with increasing company contributions as you grow with us Peace of Mind: Life Insurance to support you and your loved ones Health & Well being: Medical Cash Back Plan to help with health costs, plus access to 24/7 GP services Family-Friendly Benefits: Enhanced leave for family-related events and emergencies Support When You Need It: Employee Assistance Programme offering confidential support for personal or work-related challenges Eye Care: Eye care vouchers to help keep your vision sharp Recognition for Longevity: Long Service Awards to celebrate your milestones with us Referral Rewards: Earn a Recruitment Referral Fee by helping us find top talent Continuous Growth: Ongoing Training & Development opportunities to support your career journey Join ORONA and be part of a company moving the world safely and efficiently every day.

Senior Machine Learning Engineer - Agentic AI Platform Location: Central Cambridge (Hybrid) | Permanent | In partnership with Robert Half The Opportunity Join a global SaaS company building a cutting-edge multi-agent AI platform for enterprise data. This hands-on role focuses on scaling, hardening, and refining a graph-based agent engine as it moves toward global production. What You'll Do Agent Orchestration: Scale multi-step reasoning workflows and optimize agent collaboration. Tool Integration: Benchmark and extend toolchains within the agent framework. Inference & Performance: Optimize LLM integration, latency, and cost efficiency. State & Reliability: Strengthen Redis-backed persistence and ensure system consistency. Evaluation & Observability: Build regression frameworks and implement monitoring and tracing. What We're Looking For Strong Python engineering experience with production-grade systems Hands-on with LLM-powered applications and agent orchestration frameworks (e.g., LangGraph) Experience with stateful systems, caching, and reliability engineering Proficiency in FastAPI, Docker, and Redis Comfortable in a small, senior, high-impact team Why Join? Work on a strategic next-gen AI platform Direct influence on architecture decisions Hybrid working in Central Cambridge Excellent benefits and discretionary bonus Note: UK-based applicants only; full work rights required. No contractor/B2B/B2C roles available. Robert Half Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. Robert Half is committed to diversity, equity and inclusion. Suitable candidates with equivalent qualifications and more or less experience can apply. Rates of pay and salary ranges are dependent upon your experience, qualifications and training. If you wish to apply, please read our Privacy Notice describing how we may process, disclose and store your personal data: roberthalf.com/gb/en/privacy-notice. TPBN1_UKTJ

CNC / EDM Engineer - Glasgow Talent Media are delighted to be working in partnership with a leading high-precision manufacturing business within the advanced engineering sector, as they look to appoint a CNC Operator EDM to join their team at their Glasgow facility. Find out exactly what skills, experience, and qualifications you will need to succeed in this role before applying below. Our client delivers complex, precision-engineered components to highly regulated industries, operating to exceptionally high quality and technical standards. This role will focus on the set-up and operation of EDM (Electrical Discharge Machining) equipment, including both spark and wire erosion processes, ensuring components are manufactured accurately to tight tolerances. Key Responsibilities • Set up and operate EDM machinery (spark and wire erosion), • Load materials and unload finished components, • Adjust machine settings to ensure optimal performance and accuracy, • Interpret and work from technical engineering drawings, • Maintain accurate production records, including machine adjustments and issues, • Conduct routine machine checks and report any faults or safety concerns, • Ensure machines are stocked with tooling and materials to minimise downtime, • Adhere to all health, safety, and quality proceduresSkills & Behaviours, • Strong attention to detail with a focus on quality, • Effective communication and team collaboration, • Ability to follow technical instructions and processes, • Proactive and adaptable to production demands, • Safety-conscious approach in a manufacturing environmentQualifications & Experience, • Ideally time-served or experienced in EDM machining, • Experience with 5-axis machining and EDM is highly desirable, • Will also consider candidates with EDM experience alongside another machining discipline, • Ability to read and interpret engineering drawings, • Experience working to tight tolerances on precision components, • Good understanding of manufacturing and safety proceduresWhats in it for you?, • £22.01 per hour + shift allowance, • 37 hours per week, • Three-shift rotation (early, back, night shift), • Day shift for the first 4 weeks during training, • Full-time, permanent opportunity, • Company benefits including pension, life insurance, private medical healthcare, prescription safety eyewear, and employee retail discounts, • 33 days holiday including Christmas shutdown, • Access to online learning and development platforms Apply today or contact Talent Media for a confidential conversation.

About BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. Do you have the following skills, experience and drive to succeed in this role Find out below. We strive to create an environment where everybody feels welcome and valued.Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. Building a sustainable tomorrow BAM Infrastructure are looking to recruit an experienced and motivated Estimator/Senior Estimator to join our team. You will play a key part in the preconstruction phase of large civil engineering projects which will provide critical infrastructure to enable future, renewable developments across Scotland. This role can be based in either of our area offices located in Kilsyth or Inverness, Scotland. Making Possible • Co-ordinate with bid teams, colleagues in the estimating department and in the wider Pre-construction team, • Give direction to estimating administrative staff, • Manage and deliver cost estimates at various stages in scheme development, scope definition and design maturity to meet challenging timescales, including multiple iterations of budget and target prices, • Contribute to optioneering and feasibility assessments, value engineering proposals, liaising with bid and project teams representing a range of disciplines to develop and refine proposals and budget costs through to final target price estimates, • Liaise with clients, designers and other consultants, quantity surveyors and other third parties, • Organise and administer tender documents, correspondence, enquiries and quotations, • Challenge and contribute to all aspects of the bid preparation and submission and investigate safe and cost-effective solutions, • Collect and distribute feedback and maintain awareness of latest techniques, • Prepare cost estimates from first principles using proprietary estimating software, • Organise and participate in bid preparation and review meetings, • Prepare tender summary information and priced risk and opportunity registers, • Prepare and communicate estimate information for bid review meetings and for handover to project teams, • Comply with company proceduresWhat do you bring to the role? xrnqpay, • Degree, HND in Civil Engineering or NVQ equivalent level, • Suitable civil engineering experience, • Proven estimating experience in civil / rail engineering bids, • Considerable variety in types of work and disciplines priced, with understanding of methods and typical production rates / outputs, • Demonstrable understanding of common forms of contract, • Should demonstrate leadership and management skills and have experience of managing a team to achieve deadlinesWhats in it for you?, • Competitive salary, • A wide range of family-friendly policies, • Company car/car allowance/travel allowance, • 8 % matched pension contributions, • Private healthcare, • Life assurance, • 26 days holiday, • 2 wellbeing days, • 1 volunteering day

Production Operative - Linton At Job&Talent, we are recruiting for Production Operative to work with a leading company in the food manufacturing sector in Linton. Role of a Production Operative: Food manufacturing operative Operate and monitor food production machinery. As a Production Operative you

Production Operative - Linton Do you have the skills to fill this role Read the complete details below, and make your application today. At Job&Talent, we are recruiting for Production Operative to work with a leading company in the food manufacturing sector in Linton. As a Production Operative you

Food Production Operative - Linton.Apply (by clicking the relevant button) after checking through all the related job information below.At Job&Talent, we are recruiting for Food Production Operative to work with a leading company in the food manufacturing sector in Linton.You will be working for the

Food Production Operative Days - Linton Have you got the right qualifications and skills for this job Find out below, and hit apply to be considered. At Job&Talent, we are recruiting for Production Operative to work with a leading company in Food manufacturing operative in Linton. As a Food Product

A leading chemical manufacturing company in Duxford is seeking a Chemical Production Operator to operate plant equipment safely and efficiently in a three-shift system.

A leading technology company in Cambridge is seeking a Software Engineer to develop tools, automation, and processes that support production, testing, and product configuration. The ideal candidate will have a degree in Software Engineering or Computer Science, with strong experience in LabVIEW and

A well-established food manufacturing company in Thriplow is seeking Production Operatives for immediate start full-time work.As a Production Operative, you’ll work in a fast-paced environment to prepare, produce, and package food products.Responsibilities include working on the production line, m

Food Production Operative Days – Linton. Job&Talent is recruiting for a Production Operative at a leading food manufacturing company in Linton.

A leading inkjet technology company in the UK is seeking a Quality Control Specialist to oversee the execution of quality control strategies. This role involves conducting audits, collaborating with production teams, and communicating quality issues to senior management.

A technology company in Cambridge is looking for a Production Assembly Technician to join their manufacturing team.

A leading technology company in Waterbeach is seeking a Production & Test Lead Technician to oversee manufacturing and testing processes of opto-electromechanical devices.

Ideal candidates will have a Mechanical Engineering qualification and experience in Manufacturing or Production Engineering. A manufacturing company based in Cambridge is looking for a Production Engineer to join their new team. You will be responsible for improving build processes, introducing new

We are a growing and innovative medium-sized AV event production company that specializes in delivering high-quality audio-visual experiences for events of all sizes. Strong knowledge of scenic design principles, carpentry, and event production. A passion for AV production and event management.

We are supporting a leading Robotics & Technology company based in Cambridge who are looking to add a Senior Software Engineer to their growing team. This is a full-time permanent position with hybrid working. International travel may be required. Key responsibilities will include: • Lead on the design, development and testing for software applications., • Oversee testing, debug and code verification before production., • Put together technical documentation and report back to internal stakeholders., • Work across full system development lifecycle., • Perform field testing as and when required., • Work closely with wider engineering teams. The Successful candidate will have: • Software Engineering / Computer Science Degree BSc / BEng / HND qualification or relevant experience., • Experience with C++, ROS, ROS2., • Strong understanding of Linux., • Experience with Git., • Strong hardware experience., • Exceptional communicational skills and stakeholder management experience. If this role looks like your next challenge, please contact Ben ASAP or apply via this advert! We endeavour to reply to every candidate, every time but if you haven’t heard back within 10 days, please understand that you have unfortunately been unsuccessful for this position, or the position has been filled. Please call the office or send an email to discuss other potential positions

Senior Software Engineer - Up to £200,000 - Cambridge Title : Senior Software Engineer Company : Proprietary HFT Location : Cambridge Pay : Up to £200,000 with huge potential to increase Company : A proprietary high-frequency trading firm in Cambridge, specialising in the research and development of ultra-low-latency automated trading strategies, are looking for a Software Engineer with a demonstrable background of delivering complex projects from a concept through to delivery. It is important that you have been involved in the entire software development life cycle (SDLC), as this dynamic role will require you to rapidly prototype - and ultimately move into production - highly complex, reliable and performant systems - oftentimes from scratch. Role : Develop ultra-low-latency trading systems C++ or Rust code Work closely with a close-knit team of Software Developers and Quant Traders Build mission-critical research systems from scratch This is an early-stage hire for the team. Much of your work will be completely greenfield. You will be involved in the designing, prototyping, testing and productionising new software. Providing support to a small number of junior engineers Whilst not a requirement, you will be given the opportunity to grow into a senior managerial role should you wish About you: Holistic approach to problem solving; you are able to see the 'bigger picture' of your work Exceptional systems knowledge Exceptional Linux knowledge Strong networking knowledge (TCP/IP) Strong concurrent programming ability (C++ or Rust) Experienced working with distributed systems Full details are available. Please don't hesitate to get in touch. TPBN1_UKTJ

Our client, a pioneering Robotics and Technology company, is recruiting for a Robotics Control Engineer on a full-time permanent basis. This is a hybrid role with occasional travel. Key duties will include but are not limited to: • Assist with developing control algorithms to improve the performance of robotic systems., • Work closely with the wider team to ensure quality across the full software lifecycle., • Produce clear technical documentation covering system requirements., • Contribute to all stages of the system development lifecycle from concept to production., • Testing, debugging and verifying C++ code., • Support with field testing of robotic systems in real-world environments. The successful candidate will have: • Software Engineering / Computer Science Degree BSc / BEng / HND qualification or relevant experience., • Experience with C++, ROS, ROS2., • Strong experience with control systems., • Experience with motion planning., • Experience with Docker, CI/CD and unit testing., • Hardware integration experience with robotic platforms., • Experienced working within robotics. If this role looks like your next challenge, please contact Ben ASAP or apply via this advert! We endeavour to reply to every candidate, every time but if you haven’t heard back within 10 days, please understand that you have unfortunately been unsuccessful for this position, or the position has been filled. Please call the office or send an email to discuss other potential positions

Startup seeks engineering leadership and manufacturing know-how This Cambridge-based engineering startup is developing technologies and products for the agricultural industries that help improve crop yields and reduce pesticide use. With growing demand for their products, they are seeking an experienced electronics engineer with a strong manufacturing background to join the team as their Head of Hardware. You will report directly to the CTO and manage a small team of engineers. You will have full ownership over hardware development, from initial concepts and schematics through to production and product support. They are especially seeking the know-how to scale up their production and introduce the required engineering processes to guarantee their continued success. Requirements: • Significant commercial experience developing electronics or embedded hardware devices for production at a contract manufacturer., • Strong understanding of engineering processes and experience building and improving upon them in a real-world team context., • Startup or small team experience. Good understanding of how to work in a fast-moving and resource constrained environment., • Hands-on electronics skills. Happy and able to build and debug prototypes in a lab. This is an excellent opportunity to have a significant impact on this promising company. They are eager to grow and improve their engineering systems and manufacturing capabilities and just need the right person to make this happen. You’ll be joining a friendly and passionate team and given real freedom to make the changes that are needed. Another top job from ECM, the high-tech recruitment experts. Even if this job's not quite right, do contact us now - we may well have the ideal job for you. To discuss your requirements call ecm or email your CV. We will always ask before forwarding your CV. Please apply (quoting ref: CV27606) only if you are eligible to live and work in the UK. By submitting your details you certify that the information you provide is accurate

Our client is a renowned and well-regarded national house builder with a first class reputation across the sector, and an excellent land bank of future sites secured. With this growth in mind, we are looking to appoint an experienced and quality driven Contracts Manager to join the team and drive production forward on both new and existing schemes. Key responsibilities include: * * Motivate and support a team of Site Managers. * Detailed approach to managing build programmes and sequencing on all sites within your responsibility. * Take overall responsibility for health, safety, and environmental compliance. * Maintain quality control and ensure all works meet NHBC and company standards. * Liaise with internal departments, local authorities, and inspectors to resolve issues efficiently. * Support the customer journey by ensuring timely handovers and exceptional finish quality. * Monitor progress, identify risks, and implement corrective actions to keep the build on track. What you’ll have: * Demonstratable track record within housebuilding is essential * First class experience of Health & Safety, Building Regulations and NHBC standards * Strong understanding of local Groundworkers Please get in touch for more details and a confidential chat with George

Electrical Design Engineer (Transition from Maintenance) Salary: Up to £55,000 DoE Contract: Permanent The Company An independent, industry-leading manufacturer of world-class automated and special purpose machinery. Known for engineering excellence and innovation, this business designs and builds high-performance equipment supplied to customers globally. The Opportunity Are you an Electrical Maintenance Engineer ready to step off the tools full-time and into a more design-led role, without losing the hands-on element? This is a fantastic opportunity for engineers from a food manufacturing background who have gained exposure to EPLAN and want to develop their career in electrical design. You’ll still stay close to the shop floor, working practically with machinery, panels, and systems, but with a growing focus on design, schematics, and project involvement. You’ll be supported in making the transition from maintenance into a fully-fledged Electrical Design Engineer, working on bespoke machinery from concept through to build and commissioning. Key Responsibilities • Produce electrical schematics and control panel designs using EPLAN, • Support the design and specification of components, cabling, and systems, • Work hands-on with panel builds, wiring, and machine integration, • Assist projects from concept through to installation and commissioning, • Collaborate with internal engineering and project teams, • Provide technical input based on real-world maintenance experience, • Occasional customer interaction and site visits About You • Background as an Electrical Engineer (ideally within food manufacturing), • Experience fault-finding on automated machinery and production lines, • Exposure to EPLAN (or strong desire to develop further), • Practical, hands-on electrical experience (panels, wiring, machinery), • Basic understanding of PLCs (Siemens, Allen Bradley, Mitsubishi desirable), • Electrically qualified (NVQ Level 3 / HNC / HND or equivalent), • Keen to move into a more design-focused role while staying hands-on Why Apply? • Ideal step up from maintenance into design engineering, • Blend of hands-on work and technical design responsibility, • Work on bespoke, innovative machinery, • Clear development pathway into a fully-fledged design role, • Supportive, forward-thinking engineering environment Interested? Apply today to find out more and arrange a confidential conversation

Coatings Production Operator (Shift-Based) Location: Cambridge Department: Coatings Reporting to: Coatings Supervisor / Coatings Manager Temp to Perm (6 months temp to perm) Job Purpose We are seeking a reliable and motivated Coatings Production Operator to join our team. This role involves carrying out shift-based production activities within the Coatings department, ensuring all work is completed to the highest quality, safety, and efficiency standards. Key Responsibilities Carry out a range of coatings production activities, including: Secondary contract review Surface preparation (cleaning, blasting, masking/stopping off) Production loading using jigs and fixtures Coating chamber preparation and operation Testing of production loads Data log review and documentation Packing and despatch of finished components Work in accordance with company procedures, data sheets, and process specifications Follow all health and safety guidelines at all times Maintain and repair fixtures as required Perform routine checks on coating chambers and associated equipment (daily/weekly/monthly) Support 5S and housekeeping standards within the department Additional Duties Participate in internal production audits Contribute to continuous improvement and process optimisation Provide emergency cover for transport requirements when needed Compliance & Standards Adhere to all company policies, including: Employment policies Quality standards Health & Safety regulations Environmental and anti-corruption policies Operate within recognised frameworks and standards such as: AS9100 and ISO9001 Nadcap and customer-specific accreditations REACH, COSHH, and relevant legislation Working Environment Industrial production setting Use of heavy lifting equipment and process chemicals Occasional exposure to external elements Skills & Experience Essential: Secondary education or equivalent experience Willingness to work shifts, including nights Physically capable of manual handling tasks Full UK driving licence Desirable: Knowledge of coating processes and testing methods (training provided) Forklift truck licence Basic IT skills Key Challenges Handling high-value, precision-machined components Working with safety-critical parts for aerospace and medical industries Meeting fast turnaround times Ensuring accurate reporting and documentation We endeavour to reply to every candidate, every time but if you havent heard back within 10 days, please understand that you have unfortunately been unsuccessful for this position, or the position has been filled. TPBN1_UKTJ

Why join Marshall Land Systems in this role A Mechanical Engineer is required to support the design, development and delivery of robust mechanical solutions across bids and projects. The role will help provide continuity of design intent, maintain configuration control, and support effective coordination across programme, manufacturing, supply chain, quality and integration stakeholders. This is a hybrid role, with an expectation to be onsite in Cambridge around 70% of the time. The role The Mechanical Engineer will support the development of mechanical design solutions across bids and project delivery activities. Working as part of a wider engineering team, the role will involve developing requirements, producing and checking engineering data, supporting configuration control, and contributing to the delivery of safe, compliant and manufacturable solutions. The successful candidate will work closely with colleagues across Engineering and Operations in both the UK and Canada, supporting the delivery of products and systems that meet customer, regulatory, cost and schedule requirements. Your responsibilities will include Support the design and development of mechanical solutions across bids, projects and product modifications. Produce, amend and check engineering drawings, item lists and associated engineering data in line with company processes. Support the generation and development of design requirements from stakeholder and customer needs. Contribute to the development of mechanical architectures and practical design solutions. Work to regulatory, customer and Marshall processes, ensuring engineering outputs are safe, compliant and fit for purpose. Support the preparation and checking of technical documentation, including design data, technical reports and certification evidence. Maintain product, drawing and document configuration control. Work collaboratively with Mechanical, Electrical, Manufacturing, Quality, Supply Chain and Operations teams. Support design for manufacture and assembly activities, working with production and manufacturing teams to develop practical and efficient solutions. Assist with design queries, inspection reports, technical issues and warranty-related investigations. Support technical input into bids, statements of work and project documentation where required. Identify opportunities to improve design quality, cost, manufacturability and delivery performance. Contribute to continuous improvement and challenge existing ways of working where appropriate. What we are looking for Apply if you have most of the following: Degree qualified in Engineering, Mathematics or Physics, or equivalent relevant experience. Experience in mechanical design engineering within a complex or regulated environment. Ability to work from requirements and develop practical engineering solutions. Understanding of engineering standards, product safety and design governance. Experience producing and checking engineering drawings, product structures and associated design data. Understanding of design for manufacture, design for assembly and configuration management. Broad understanding of manufacturing methods such as sheet metal fabrication, welding, riveting and bonding. Strong problem-solving skills with a high level of attention to detail. Ability to work accurately, manage priorities and deliver to timescale. Confidence to provide sound technical input based on facts and engineering judgement. Good communication skills, with the ability to explain technical information clearly to both technical and non-technical audiences. Ability to work effectively across teams, functions and locations. Desirable experience Experience supporting products through production, build, integration or in-service support. Experience contributing to bids, technical proposals or statements of work. Experience preparing technical reports and supporting certification activities. Structural design experience would be beneficial, including understanding of structural theory and experience developing structural solutions, particularly for steel welded frames. The benefits we offer include 27 days holiday, increasing with service up to 30 days, with the option to buy and sell leave Pension contributions up to 9% Private medical insurance Extensive flexible benefits programme including Cycle to Work Life assurance at 4x basic salary Enhanced parental leave and pay Paid volunteering leave Access to industry-leading wellbeing resources and tools Introduction to Marshall Land Systems Marshall Land Systems is a Canadian-owned global company with an unrivalled pedigree of British engineering excellence. From its origins in Cambridge, UK, through more than a century of innovation, pioneering advances from the nose of Concorde to the early Hydrogen fuel cell technology that ultimately powered the moon landings, Marshall engineers now continue to innovate specialist vehicles and infrastructure for NATO forces across the world. From bomb disposal vehicles to deployed shelters, from command and control to CT scanners on the battlefield, Marshall Land Systems protects people in critical situations with the very best in engineering. It employs 600 people with major facilities the UK, Canada, and the Netherlands. #LI-Hybrid #LI-DW1 #IND-AEO

Engineering Projects Manager - Cambridgeshire Do you have experience working within a highly regulated production environment? Are you looking for a long-term role with clear paths for progression? Then this aerospace company looking to add an Engineering Projects Manager to the team is looking for you! Your duties as a Engineering Projects Manager include but are not limited to the following: Lead and manage the full project life cycle for specialist projects and installations, facilitating technical decisions and identifying all factors involved. Supporting the Projects, Engineering and Maintenance Manager to ensure tender specifications are within budget. Develop and carry out PPM schedules while ensuring accurate record keeping. Provide consistent and regular updates and reports to the Projects, Engineering and Maintenance Manager. Fully assess engineering risks and develop mitigation strategies. Requirements: Mechanical Engineering qualification/professional status. Experience in a project engineering/management experience in a multi-national manufacturing organisation. Product and industry knowledge of plant equipment, automated systems. Working knowledge of commissioning processes, and managing and mitigating risks utilising specific techniques for engineering projects. Able to handle multiple, competing priorities. For more information please apply or contact Chad Petersen at Smart4 Chemicals

Mechanical Fitter (Mechanical assembler) c£32k + Bonus Cambridgeshire ABJ6516 An excellent opportunity has arisen for a Mechanical Fitter / Assembler with experience in hydraulics to join a well-established engineering and manufacturing company in Cambridgeshire. This is a varied, hands-on role within a busy factory environment, working on a wide range of production and fabrication machinery. This Mechanical Multi-skilled Assembler would work on various types of assembly and fitting to a high standard for equipment used in the processing industry. Key Responsibilities * To assemble and fit all aspects of manufacturing components to a very high standard used to produce stainless steel processing equipment. * You must be able to work within a team, either in the main production area or if applicable on a client’s site and be aware of all aspects including Health & Safety, Production, Inspection and Discipline. Qualifications and experience * Engineering apprenticeship or equivalent hands-on training * Recognised engineering qualification (City & Guilds, BTEC or similar) * Mechanical fitter / assembler experience within manufacturing, engineering or heavy industry * Experience in mechanical fitting/stripping and rebuilding. * Experience in building air pneumatics. * Experience in building and fitting bearing housings. * Candidates need to be able to read and have good understanding of engineering drawings. * Be proficient with the use of various hand tools and mechanical equipment. * Have significant experience of building special purpose machinery. * Experience in Hydraulics. * Maintain good housekeeping/good order, motivation and discipline while working in the factory or on site. * Uphold Health & Safety – Risk assessments/Method statements. Salary & Benefits * £16 per hour (approx. £32000 salary) + Annual company performance bonus * Regular overtime available (paid at 1.5x) * 20 days holiday + bank holidays (rising to 26 with service) * Company pension Life assurance Working Hours (39 hours per week) * Monday: 7:30am – 4:00pm * Tuesday: 7:30am – 4:30pm * Wednesday & Thursday: 7:30am – 5:00pm * Friday: 7:30am – 12:00pm (early finish) To apply, please contact Alison Basson quoting reference ABJ6516: +44 (0)(phone number removed)

Development Engineer - Drug Delivery Devices Newton Colmore is partnered with a medical technology company in Cambridge and we are helping them find a development engineer to join their research team. As a Development Engineer in this company, you will be working on a novel injectable drug delivery device and will help lead the design of this next-generation product into production. Within this vital role for the company, you will be working with a multidisciplinary team and will play a pivotal role in the design and development process of this product. This will include designing robust mechanical solutions to a product within ISO 13485 standards. It is a small team that you will be joining which is both versatile and tenacious in their pursuit of delivering a step-change to patients with their technology. To succeed in this role, you will need strong fundamentals with mechanical engineering and have previous experience with drug delivery systems. Ideally this would be coupled with experience of the full design cycle, working on something from an idea, all the way through to readying the product for manufacture. In exchange for your skills and expertise, the company offer a tailored salary and includes shares/equity, income protection and pension. This is a great opportunity to join a fledgling and well backed startup and help lead the design of a ground-breaking medical device. We are looking to arrange interviews for this role as soon as possible so if the role is of interest make an application now. One of our consultants will then be in touch with more details. Newton Colmore is a specialist recruiter dedicated to helping our medical devices and biotech clients find the experts they need to develop new technologies.

Maintenance Engineer - Cambridgeshire Do you have experience working within a highly regulated production environment? Are you looking for a long-term role with clear paths for progression? Then this aerospace company looking to add a Maintenance Engineer to the team is looking for you! Your duties as a Maintenance Engineer include but are not limited to the following: Support maintenance across the site to improve plant performance and reliability (OEE). Assist with fault finding and troubleshooting to implement corrective actions. Develop and carry out PPM schedules while ensuring accurate record keeping. Training relevant production personnel to improve their skills regarding machine maintenance and set-up. Supplier and OEM management to develop machine and spare parts improvements. Requirements: Relevant Engineering degree or equivalent experience. Demonstrated maintenance and downtime reduction experience. Demonstrable knowledge of COMPEX, ATEX and DSEAR. PLC experience is advantageous. For more information please apply or contact Chad Petersen at Smart4 Chemicals