Electrician jobs in Indiana - Page 4

Job DescriptionDescription: Position Summary: Reports and takes direction from the Electrical Supervisor and is responsible for the preventive maintenance, repair and alterations of all electrical equipment at the Building Authority properties. Specific Duties: • Performs preventative maintenance and repair work to include:, • Lighting systems, • Emergency generators, • Motors and motor control systems., • Pumps (CCB), • Card readers. (CCB), • Automatic door system. (CCB), • Commercial Laundry equipment. (CCB), • Air conditioning systems and control circuits. (CCB), • Various electrical kitchen equipment systems. (CCB), • Intercom systems and public address systems. (CCB), • High voltage switch gear. (CJC), • Fire and smoke alarm systems. (CJC) 2. Performs electrical alterations for Building maintained by Downtown operations to include. • Installation of communication cable., • Installation of switches and receptacles., • Installation of conduit and pulling wires., • Connection of completed electrical circuits to power sources., • Interpret and apply NEC to job. (CCB), • Installation of various camera systems. (CCB), • Reading of blueprints and schematics diagrams (CCB), • Assist electrical supervisor in laying out alterations. (CCB), • Installation of various fire alarm equipment. (CJC), • To comply with Building Authority policies, procedures and safety regulations., • Assist the other shops with maintenance repair., • To perform all other duties as assigned by the Electrical supervisor. Equipment Used: The Electrician should be familiar with equipment and tools including Mega Ohm, Amp and Volt meters, Circuit Traces, Pipe Benders, Trucks, Ladders, Electrical Hand Tools and Safety Equipment. Requirements: Minimum Qualifications: • High School Diploma., • 3 Years of Previous experience and working knowledge in the preventative maintenance, repair and installation of electrical systems., • Valid Indiana Driver’s License., • Self-motivated., • Ability to work independently., • Ability to work flexible schedule., • Technical skills -the expertise necessary to perform a specific role., • Solid work ethic - a set of values based on the ideals of discipline and hard work., • Good attitude – the way one views work and life situations., • Self-motivated - ability to do what needs to be done without prompting, self-managing., • Team player – person who works well with others., • This position requires work in an indoor building setting and exposed to outdoor environments., • This position requires working independently, as well as part of a team., • This position requires verbal and face-to-face contact with others on a daily basis. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. 20/40 vision or corrected vision is required for this role. Frequency Key: Never – 0 hours; Rare – up to 1 hour; Occasional – 1-3 hours; Frequent – 3-6 hours; Constant – 6-8 hours. Sitting Occasional Near Vision Constant Walking Frequently Far Vision Occasional Climbing stairs Occasional Hearing Constant Crouching/Bending/Stooping Constant Talking Frequent Reaching Constant Smell Never Grasping Occasional Lifting/Carrying (# 50 lbs.) Frequent Pushing/Pulling Frequent Travel Rare AAP/EEO Statement IMCBA is committed to being an equal opportunity employer. Company policy is to offer equal opportunity to all qualified employees and applicants for employment without regard to race, color, religion, national origin, sex, age, veteran status, disability or any other category protected by applicable federal, state or local laws. This policy is applicable to recruitment, hiring, rates of pay, job assignments, promotion, training, discipline, and all other terms and conditions of employment. Reasonable Accommodations IMCBA complies with the Americans with Disabilities Act (ADA) and the ADA Amendments Act (ADAAA). As such, IMCBA will make reasonable accommodation for known physical or mental disabilities of a qualified and disabled applicant or employee, unless the accommodation would cause an undue hardship on the operations of the company. Because the need for an accommodation is often not apparent, it is the responsibility of the employee to request accommodation. Requests should be made to the Human Resources Department. The individual should identify what accommodation he or she believes is needed in order to perform the essential functions of the job. Employees may be asked to provide medical evidence to support the need for the requested accommodation. Please contact the Human Resource Department with any questions or requests for accommodation. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Company car, • Competitive salary, • Dental insurance, • Flexible schedule, • Free food & snacks, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance, • Wellness resources Are you looking for an opportunity to work and grow in a fast growing team of electrical professionals? Join Our Team of Professional Electricians Do you value professionalism and punctuality? Do you want to work with the best pros in the electrical industry? Then you could be a candidate for Mister Sparky. If you value a rewarding career and would like your customers to be genuinely satisfied, youll be fit for our team! Opportunities for professional electricians and customer service professionals are now available across the country. JOB SUMMARY This position performs and coordinates the installation and service of electrical products and services in a residential and light commercial setting. JOB DUTIES • Works under minimal supervision to perform residential and/or light commercial service and maintenance calls., • Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner., • Diagnoses malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem. May provide preliminary sketches or cost estimates for materials or services, • Inspects electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure in compliance with codes., • Tests electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system., • Plans layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes., • Repairs or replaces wiring, equipment, or fixtures, using hand tools or power tools. Connects wires to circuit breakers, transformers, or other components. Fastens small metal or plastic boxes to walls to house electrical switches or outlets., • Places conduit, pipes, or tubing inside designated partitions, walls, or other concealed areas, and pulls insulated wires or cables through the conduit to complete circuits between boxes., • Installs ground leads and connects power cables to equipment, such as motors., • Constructs and fabricates parts, using hand tools and specifications., • Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as oscilloscopes, amp meters, or test lamps., • Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures., • Maintains current electrician's license in accordance with governmental regulations., • Ensures company property, vehicles, and tools are being used, maintained and properly accounted for., • Following standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to branch, and orders/replenishes vehicle stock as needed., • Represents the company professionally, honestly, and ethically in all business matters and activities., • Performs similar/other duties as needed or assigned., • Use the Straight Forward Pricing Guide, accurately present repair or installation options, and complete safety inspectionsMINIMUM REQUIREMENTS, • Licensed Journeyman Electrician in Allen County, Indiana OR capable of reciprocating existing license from another county., • High school diploma or equivalent, • Background check and drug screening, • Clean driving record, • Ability to communicate effectively to clients about issues and provide accurate solutions, • Must have local and state licenses as needed.

Job DescriptionSalary: ERMCO, Inc. is a national leader in electrical, low voltage solutions, and automation contracting. Since 1962, weve been headquartered in Indianapolis, and today our operations are based in Greenwood, Indiana. We partner on landmark projects across the United States, providing full-service expertise in electrical, technology and low voltage solutions, (low voltage networks, audio/visual, DAS and security), building controls and automation, and energy solutions for all types of projects. Every ERMCO project is backed by a dedicated team of project managers, engineers, estimators, technicians, and craftspeople along with strong support from IT, marketing, accounting, and other departments. We are also proud to be100% employee-owned, giving every team member a stake in our success. ERMCO is seeking a VDC (Virtual Design in Construction) Engineer to collaborate with the account management team to develop and implement effective construction installation standards for all projects, with the goal of reducing costs and enhancing profitability for ERMCO, Inc. This role is responsible for producing and managing project deliverables , developing and coordinating detailed 3D electrical models, installation drawings, feeder schedules, and fabrication documentation. The VDC Engineer will support project planning by coordinating electrical systems to avoid conflicts, creating task-specific work assignments, assisting with project scheduling, and preparing Trimble point files and other field-installation resources. This position requires regular communication with the field team, participation in coordination meetings, and a proactive approach to improving workflows, software use, and project efficiency. The position reports to the VDC Team Lead and is an in-office and/or jobsite-based role. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Ensure that all project deliverables are produced per Construction Services Department standard operating procedures., • Administer electronic media per ERMCO Drawing Standard., • 3D Model electrical components per NEC and ERMCO Drawing Standard., • Confirm, through the coordination process, that electrical components can be installed without conflict., • Create and distribute installation drawings per ERMCO Drawing Standard., • Create task specific work assignments., • Prepare design and installation documents for the fabrication plan., • Participate fully in all training, meetings, and seminars as directed by the VDC Team Leader., • Regularly communicate information concerning department operations to the VDC manager., • Ensure that all duties of this position and those of team members reporting to this position are carried out in compliance with ERMCOs stated mission, vision, values, safety standards, and company policies and procedures., • Research and report on software applications that may allow VDC department to operate more efficiently., • Willingness to work any hours needed to ensure that job responsibilities are fulfilled thoroughly and accurately., • Completion of fully detailed work assignments and install drawings ready for publication with little or no re-work., • Attend COT meetings., • Develop detailed and accurate feeder schedules that remain up to date throughout a project., • Obtain all necessary files to create accurate Trimble drawings. Create all point files required to accurately locate coordinated electrical components as requested or critical to installation in the field., • Model and coordinate efficient conduit pathways that follow NEC requirements and ensure cost effective routing., • Assist account management staff to create and update project schedules., • Take a proactive approach to project planning in order to maximize profit opportunities., • Participate in trade associations, committees and programs that advance the construction industry, the community and ERMCO, Inc., • Actively pursue and generate business opportunities, and cultivate relationships with existing and potential customers, while ensuring complete customer satisfaction., • Maintain vendor relationships that enhance and protect the corporation's position, while working within both the companys policies and the current legal standards. This includes taking necessary precautions to avoid situations that could be construed as a conflict of interest or that could be deemed to be sufficient to unduly influence the employee's ability to make prudent decisions that are in the best interest of the corporation. If there are any questions concerning a specific situation, the employee's participation is to be approved in advance by the manager of this position., • Perform tasks as directed by the VDC Manager, • Take ownership of all work and able to independently identify upcoming tasks based on the construction schedule or jobsite observations., • All other duties as assigned. EXPERIENCE, EDUCATION: • Bachelors Degree in Business Management, Construction Management, or Construction Engineering, or Journeyman Electrician., • Always punctual and committed to staying on task, • Strong problem-solving skills, effective reasoning and judgment abilities., • Demonstrates ability to interact and cooperate with all company employees and team members within a very diverse company., • Excellent time management skills, attention to detail and the ability to learn quickly, • Ability to work with a sense of urgency, prioritizing multiple tasks and projects while maintaining a professional, positive, proactive and energetic approach., • Self-motivated with the ability to work independently and/or within a team, • Capable of reading, interpreting and understanding contract documents, plans, and specifications., • Ability to navigate and comprehend the National Electrical Code., • Good verbal and written communication skills., • High degree of computer literacy, including proficiency in Autodesk Revit, Navisworks Manage, Evolve Electrical Suite, AutoCAD MEP, Primavera P6, Microsoft Project, Accubid, BlueBeam Revu and Microsoft Office Suite. ERMCO, Inc Benefits: • Medical, • Dental, • Vision, • PTO, • Basic Life Insurance, • STD, LTD, Voluntary Life, • 401k, • ESOP!!

Job DescriptionSalary: InPwr, Inc. is looking for multiple openings for National Electrical General Superintendents and Site Superintendentsto join our dynamic team! We are an award-winning electrical design-build firm headquartered in Indianapolis, IN, with offices in Denver, CO, Los Angeles, CA, and Naples, FL. Named a 2019, 2022, 2023, and 2024 Top Places to Work, we believe in building it better, focus on complex opportunities, and taking the electrical design to the next level, with licenses in over forty states and projects across the nation. We InPwr people through personal commitment, relentless dedication, and driving results together. Come Join our Team! Openings: National Electrical General Superintendents and Site Superintendents Location: Nationwide in United States (must be willing to travel) Schedule: 17 days on and 4 days off (must be willing to work this schedule) Day-to-day tasks include, but not limited to the following: • Perform scheduled and unscheduled site visits for QA/QC purposes including site foreman project requirements including as-builts and progress drawings in addition to the installation of equipment and materials., • Adhere to and enforce InPwr Inc. safety protocol and promote onsite hazard awareness., • Implement and enforce InPwr Inc. policies and procedures in areas of human resources, jobsite documentation and project execution., • Provide general support on an as needed basis for General Foreman, Project Foreman., • Manage the current InPwr Labor Tracking of personnel., • Continually assess InPwr field personnel as it applies to individuals job qualifications, performance, and compensation evaluations., • Manage fleet vehicle assignments and schedule of services., • Manage and coordinate tool set up, mobilization and transfer for new and recently completed projects., • Promote and reinforce InPwr core values to all field personnel., • Encourage and support field personnel in all matters of electrical licensing and continuing education. Qualifications & Minimum Requirements: • Master Electrician license strongly preferred., • (10) Years of electrical construction experience., • Possess at minimum (1) Journeyman electrical license., • The ability to pass local city or county Journeyman electrical licensing exams on a project specific as needed basis., • Working knowledge of Microsoft Office Suite including Microsoft Project., • Valid drivers license, • Value highly collaborative solution-oriented relationships with departmental Directors, Project, • Management, Project Accountant, Human Resources, Payroll Specialist., • Ability to travel on a weekly basis either scheduled or unscheduled., • Working knowledge of the National Electrical Code and electrical theory., • Proficient skills in reading construction drawings, specifications, electrical submittals., • Knowledgeable expertise in layout of electrical equipment and systems., • Applicants must complete a background check and have a valid drivers license, • Must have the ability to adapt to various working environments and make decisions based on industry best practices, • Must have heavy commercial/industrial experience, • Must be able to pass Government Background Check due to nature of the job. Benefits: • Medical, Dental, Vision and Life Insurance 100% company paid for employees, • Paid vacation & holidays, • 401(k) company match, • 30-day paid sabbatical every 5 years of employment, • Stable employment with a growing company, • Highly competitive salary Working/ Environment/ Physical Demandsto successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee frequently is required to climb, crawl, kneel, stand, balance, walk, use hands to finger, handle or feel and reach with hands and arms. The employee must occasionally lift and/or move up to 51 pounds and greater than 60 pounds using appropriate equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is required to properly use such safety equipment as is appropriate to the work to prevent injury to self or others. The job can be performed under extreme temperature and some hazardous conditions EEO, Drug Free Workplace Safety has always been our priority. Along with the usual protocols to protect our workforce, vendors, and business partners, weve implemented additional safety standards, specifically in response to minimizing the possibility of transmission of the COVID-19 virus. Along with CDC recommended guidelines associated with hand-sanitization and safe-distancing, weve established procedures to reduce exposure and susceptibility. These include providing personnel with appropriate PPE, limiting non-essential foot traffic, added cleaning protocols, and encouraging open lines of communication for feedback, questions, and concerns. Employment contingent upon successful completion of background investigation and drug screening. Smoke-free workplace. Drug-free work environment according to Federal Law. InPwr Inc is not currently hiring individuals for this position who now or in the future require sponsorship for employment visa status. Our hiring process includes drug & alcohol screening, E-verify, driving record, and background check. InPwr Inc. is an Equal Opportunity Employer and a Drug-Free Workplace Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Visit us at to apply online!

Job Description We are currently seeking a Journeyman Electrician You will strive to provide safe electrical systems for a variety of customers. Responsibilities: • Install and repair electrical equipment and fixtures, • Install various types of raceway and cable tray systems, • Perform routine maintenance on electrical wiring and systems, • Familiarity with electrical schematics, blueprints, and manuals, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skills, • Minimum five years experienceCompany DescriptionProjects are 90% commercial/industrial, 10% residentialProjects are 90% commercial/industrial, 10% residential

Job Description We are currently seeking an Electrician! You will strive to provide safe electrical systems for a variety of customers. Responsibilities: • Install and repair electrical equipment and fixtures, • Install various types of raceway and cable tray systems, • Troubleshoot motor and control systems, • Perform routine maintenance on electrical wiring and systems, • Previous experience in electrical engineering or other related fields, • Familiarity with electrical schematics, blueprints, and manuals, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skills, • Must be willing to travel. We operate in multiple states.Company DescriptionISG Services is an electrical, communication and alarm contractor. Much of our work is commercial & industrial based. We install a wide variety of power systems from municipal water systems, fiber optic shelter sites, AI building sites to the typical TI build out.ISG Services is an electrical, communication and alarm contractor. Much of our work is commercial & industrial based. We install a wide variety of power systems from municipal water systems, fiber optic shelter sites, AI building sites to the typical TI build out.

Job Description • Troubleshooting & Repair: Diagnose and fix faults in electrical components, motors, motor controls, PLCs, and drives., • Preventive Maintenance: Perform routine inspections and maintenance on equipment, including conveyors and production machinery., • Installation: Install new electrical systems, wiring, conduits, and panels according to blueprints and troubleshooting, • Safety Compliance: Adhere to all safety standards, including Lockout/Tagout (LOTO) and OSHA regulations., • Documentation: Maintain records of repairs, maintenance, and system changes

Job DescriptionJob Title: Electrician Job Description We are seeking skilled electricians to join our team for a long-term project primarily based at the Ford Meter Box. The project involves working 40-50 hours per week and requires expertise in running rigid conduit, piping, and wire installation. Candidates should be comfortable working at heights, utilizing ladders or scissor lifts. This opportunity offers potential for ongoing work, depending on project progress and performance. Responsibilities • Run rigid conduit and piping for electrical systems., • Install and run electrical wiring., • Work from ladders or scissor lifts at heights., • Utilize power and hand tools effectively., • Collaborate with team members to complete tasks efficiently.Essential Skills, • Experience with electrical commercial and industrial projects., • Proficiency in conduit bending and installation., • Ability to work at heights safely., • Familiarity with hand and power tools.Additional Skills & Qualifications, • Background in industrial electrician roles., • Experience with cable and pipe bending., • Journeyman level experience is a plus.Why Work Here? Join a dynamic team with the opportunity to work on multiple projects simultaneously. Enjoy the chance for continued employment based on project needs and performance. Work in a supportive environment that values skill development and teamwork. Work Environment The work is based at the Ford Meter Box project in Wabash, IN. The environment requires working at heights and involves the use of ladders, scissor lifts, and a variety of hand and power tools. Job Type & Location This is a Contract position based out of Wabash, IN. Pay and Benefits The pay range for this position is $20.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionElectrical Fabricator At Mobile Air & Power Rentals, we provide innovative cooling, heating, dehumidification, and power solutions for customers nationwide. Our Rental Solutions Business depends on skilled technical fabrication teams to build, customize, refurbish, and support rental equipment used across a wide range of industries and applications. We are currently hiring a Electrical Fabricator to join our Indianapolis-based fabrication and depot operations team. Why Mobile Air? Here are some of the perks & rewards: * Full-time position with overtime opportunities * Competitive hourly pay * Health, Vision, and Dental Insurance * Life Insurance * 401(k) with company match * Paid time off (vacation, sick days, holidays) * Career development and advancement opportunities * Employee discount programs What you’ll do: As a Electrical Fabricator, you will apply your technical expertise in electrical and control systems to support the fabrication, troubleshooting, refurbishment, and customization of rental equipment and new builds. Key responsibilities include: * Perform electrical fabrication, repair, and refurbishment activities for rental equipment and new builds * Troubleshoot electrical and control system issues to identify root causes and implement efficient, safe solutions * Support shop floor fabrication activities across a range of equipment and custom projects * Perform electrical system mapping, panel building, and refurbishment of electrical cabinets and control panels * Operate shop equipment and heavy machinery, including cranes, saws, forklifts, and semi-tractor trailers * Complete required documentation related to work performed, testing, and repairs * Identify and communicate process improvements that enhance efficiency, quality, and shop safety * Support depot operations, including serving as a backup Depot Coordinator when directed * Assist with shipping, receiving, and general depot activities as needed * Perform other duties or special projects assigned to support fabrication and rental operations We’re looking for the following skills/experience: * High school diploma or GED required * Minimum of 2 years of experience in an electrical, manufacturing, or technical fabrication environment * Master or Journeyman Electrician certification required * Strong understanding of electrical and control systems, codes, and best practices * Transformer logic experience preferred * Forklift certification required; crane operation experience preferred * Shipping and receiving experience is a plus * Basic proficiency with Microsoft Office and other PC-based programs * Strong communication and interpersonal skills to work effectively with internal teams * Commitment to safety, quality workmanship, and continuous improvement Work Location: * Rental Depot – HQ | Indianapolis, IN * This is an onsite role supporting fabrication, testing, and depot operations Join our team and play a critical role in building and supporting the electrical systems that power Mobile Air & Power Rentals’ nationwide rental fleet. #LI-Onsite

Job DescriptionI. Position Description Provides operations and production support by providing electrical troubleshooting, repairs, and installation. ESSENTIAL DUTIES AND RESPONSIBILITIES • Performs corrective and preventative electrical maintenance., • Troubleshoots, repairs, and maintains electrical and electronic equipment and instrumentation systems using schematics, drawings, and other technical documentation., • Performs electrical installation of new plant equipment and processes, including routing of electrical conduits, cable, or wire from current power sources., • Instruct, implement, and enforce the company safety program and site-specific safety requirements., • Keeps maintenance shop, and all materials storage areas neat, clean, and free of debris., • Complies with all environmental, health, safety, and housekeeping programs., • Performs other duties, as assigned by supervisor and/or higher classifications.II. QualificationsA. PRE-HIRE REQUIREMENTS, • Associate degree in electrical engineering, journeyman experience, or completion of a trade school program., • 5+ years’ experience as an industrial electrician., • Knowledge of NFPA 70E: National Electric Code., • 2-3 years’ experience using various types of electrical testing equipment., • 2-3 years’ experience reading schematics, blueprints, and other technical documents., • 2-3 years’ experience troubleshooting, repairing, and installing electrical equipment ranging from 480Vac to 24Vdc., • 1-2 years’ experience troubleshooting, repairing, and installing various types of controls equipment such as relays, motor starters, pushbuttons, switches, etc., • 1-2 years’ experience troubleshooting, repairing, and installing Allen-Bradley PLC’s and controls., • 1-2 years’ experience troubleshooting, repairing, and installing AC/DC drives and motors., • 2-3 years’ experience troubleshooting, repairing, and installing various types of conduits, cable tray and wire., • Ability to utilize computer operating systems., • Good verbal and written communication skills., • Grade of 70% or above on “Electrician Aptitude Test”., • Average leadership skills, work ethic and problem solving., • Able to work any shift, overtime, and rotating weekends. B. POST-HIRE TRAINING, • Environmental training applicable to the job, • Safety training for applicable equipment, • Job instructional training, • Quality system familiarization, • ISO 14001 awareness, objectives and targets, department significant environmental impacts Potential for Inorganic Arsenic Exposure over PEL: Yes [ X ] No [ ] Potential for Cadmium Exposure over PEL: Yes [ X ] No [ ] IV. DisclaimerA. EQUAL OPPORTUNITY EMPLOYER Ecobat Resources is an Equal Opportunity Employer. Qualified applicants receive consideration for employment without discrimination because of race, color, religion, sex, age, national origin, ancestry, marital status, sexual orientation, disability, handicap or Veteran status, including disabled and Vietnam era veterans.

Job DescriptionMister Sparky, an affiliate of Authority Brands, is excited to announce that were officially under NEW management and eager to add experienced licensed Electricians to our Indianapolis, IN Team. The Electricians will perform tasks related to electrical repair and/or installation of electrical equipment for residential customers and be responsible for maintaining customer health, safety and satisfaction. What can joining the One Hour team offer you? • The opportunity you deserve to build your career with a well-established company. We prioritize promoting from within!, • Competitive pay rates, plus commission potential., • Paid training and professional development assistance., • Service vans, fuel cards, company phone, and iPads provided., • Referral program., • A best-in-the-industry benefits package that includes generous PTO, health, dental, vision, life insurance, and 401k with company match!Theres never been a better time to join our team! Responsibilities: • Assemble, install, test, and maintain electrical or electronic wiring, equipment, apparatus, and fixtures., • Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem., • Connect wires to circuit breakers, transformers, or other components., • Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, ensuring compliance with codes., • Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes., • Install ground leads and connect power cables to equipment., • Place conduit inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete the circuits between boxes., • Construct/fabricate parts; fasten boxes to wall to house electrical switches or outlets., • Provide preliminary sketches and cost estimates for materials and services., • Works closely with other departments to ensure the proper transfer of all service work business data., • Inspection of area for cleanliness after job completion respecting the customers property., • Maintain company vehicle, ensuring cleanliness and organization, both inside and out., • Always maintain a professional image. Qualifications:, • Must have a minimum of 3 years of verifiable experience as an Electrician in a residential service and maintenance operation., • High school diploma or GED., • Basic math and reading comprehension., • Knowledge of electrical field concepts, practices, best practices, and procedures including the technical ability to understand and interpret Electrical Codes, Life Safety Codes, NFPA, Uniform Building Codes and Lighting Systems., • Solid communication and customer service skills., • Must have appropriate trade tools., • Valid drivers license and a clean driving record., • Ability to pass a background check and drug screen.We want to make joining our team as easy as possible. Our team members are the most valuable assets in our organization. If you have a great attitude and a strong work ethic and are someone who takes pride in the work you do, then we want to hear from you! Authority Brands Inc. conducts drug screens and background checks on applicants who accept employment offers. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions; however, we do not sponsor visas at this time. Authority Brands Inc. is an Equal Opportunity Employer.

Job Description Electrician- HWC JOB SUMMARY: This position is one with emphasis on both instrumentation and electrical work. Work with instrumentation includes installing, maintaining, and repairing/replacing automated valves and field instrumentation. This position also requires the maintenance and troubleshooting of the plant’s process control systems and equipment. Electrical work includes installing, maintaining, and repairing/replacing electrical wire and conduit, switches, motor control centers and breakers, and other electrical equipment. DIMENSIONS: The Hammond Indiana facility is comprised of five distinct manufacturing lines: HiTEC, HiTemp, Sulfurization, Functional Additives, and Blends. The facility operates under ISO 9001 and RCMS guidelines and is required to comply and adhere to strict OSHA/EPA regulatory protocols and regulations. The facility is also a Title V operation and operates under the appropriate guidelines. The Hammond plant operation manufactures approximately 80MM pounds and $75-100M of specialty chemicals annually. The Hammond, Indiana site is unionized and represented by the United Steel Workers Union JOB REQUIREMENTS: Education and Experience High school or general education degree (GED). • At least five (5) years of industrial experience in a chemical plant or other related industry experience., • Knowledgeable in the installation and repair of various types of process control and instrumentation., • Able to read and follow system blue prints and P&ID drawings., • Strong troubleshooting skills., • Knowledge of electric codes., • Able to read and create electrical and circuit diagrams., • Able to read and accurately redline control wiring sheets and electrical ladder diagrams. Work Skills and Abilities • Must possess solid understanding of all aspects of electrical safety., • Able to install and maintain electric wiring and equipment., • Ability to troubleshoot and diagnose electrical and instrumentation failures and correct the problem., • Bench test and field calibrate various field instrumentation, switches, and sensors., • Set-up control valves and their positioners., • Understand instrument and electrical manuals and effectively communicate with manufacturing representatives and vendors., • Computer skills are a must with knowledge of CMMS, MS Word, MS Excel, MS Outlook, and MS PowerPoint., • Requires good verbal and written communication skills., • Must possess organization and interpersonal skills., • Ability to prioritize tasks and work on multiple projects simultaneously., • Experience using (CMMS) Computerized Maintenance Management System (i.e. Tabware or similar)., • Able to follow detailed instruction with minimal supervision., • Must be detail-orientated, with the ability to identify and correct errors., • Must be team-oriented., • Able to work well under pressure and deadlines, • Must wear personal protective equipment (PPE) in compliance with Occupational Safety and Health Administration (OSHA) regulations., • Receive daily assignments from the Maintenance Manager and other members of the management team., • Must be able to work extended hours, weekends as needed, to manage and direct projects, unexpected operational/equipment failures, scheduled operation shutdowns etc., • The ability to perform physical activities that require considerable use of arms and legs such as climbing, lifting balancing, walking, standing, stooping, climbing stairs, handling of materials, etc. COMPETITIVE BENEFITS INCLUDING: Medical, prescription, dental, bonus potential, up to 4% matching 401 (k), vacation, paid holidays, company paid life insurance. Salary will be commensurate based on union contract NO PHONE CALLS TO EMPLOYER - NO RECRUITER CALLS – NO VISA SPONSORSHIPS

Job DescriptionBone Dry Solar, a leading solar systems installer and service provider for Central Indiana, located in Indianapolis, is looking to add a Solar Electrician to the team. As a Solar Electrician, you will play a vital role in the installation, maintenance, and repair of solar energy systems. Your expertise will contribute directly to the growth of sustainable energy practices, reducing reliance on traditional power sources and mitigating environmental impact. This position requires a blend of technical proficiency, problem-solving skills, customer service focus and a commitment to safety standards.Responsibilities: • Installation of Solar Panels: Execute the assembly and mounting of solar panels on various structures, ensuring optimal placement for maximum energy capture and efficiency., • Electrical Wiring and Connection: Connect solar panels to electrical systems, including inverters, batteries, and grid interconnection points. Ensure compliance with local electrical codes and safety standards., • System Testing and Commissioning: Conduct thorough testing of solar energy systems to verify proper functionality and performance. Troubleshoot and resolve any issues that may arise during installation or commissioning., • Maintenance and Repairs: Perform routine maintenance tasks on solar panels and associated equipment, such as cleaning, inspection, and system optimization. Diagnose and repair faults or malfunctions to restore system efficiency., • Documentation and Reporting: Maintain accurate records of installation activities, including equipment specifications, wiring diagrams, and test results. Generate reports detailing system performance and any maintenance or repair work completed., • Customer Interaction: Communicate effectively with clients to explain system operation, maintenance requirements, and troubleshooting procedures. Address any concerns or questions regarding solar energy systems in a professional manner., • Safety Compliance: Adhere to strict safety protocols and guidelines throughout the installation, maintenance, and repair processes. Identify potential hazards and implement appropriate measures to minimize risks to personnel and property., • Continued Learning and Development: Stay updated on industry advancements, new technologies, and best practices related to solar energy systems. Participate in training programs and professional development opportunities to enhance skills and knowledge.Qualifications:, • Electrical Expertise: Minimum of 3 years hands on electrical experience. Proficiency in electrical wiring, circuitry, and systems installation, with a strong understanding of AC and DC electrical principles., • Solar Energy Knowledge: Familiarity with solar photovoltaic (PV) technology, including panel types, mounting methods, and system components., • Technical Skills: Ability to use hand and power tools effectively, read technical drawings and schematics, and troubleshoot electrical systems., • Attention to Detail: Meticulousness in performing installation tasks and conducting system tests to ensure accuracy and reliability., • Problem-Solving Abilities: Capacity to diagnose and resolve technical issues efficiently, utilizing critical thinking and troubleshooting skills., • Communication Skills: Clear and concise communication skills, both verbal and written, to interact with clients, team members, and stakeholders effectively., • Safety Consciousness: Commitment to maintaining a safe work environment and following safety procedures to prevent accidents or injuries., • Certifications: Possession of relevant certifications, such as a journeyman electrician license, NABCEP (North American Board of Certified Energy Practitioners) certification, or OSHA (Occupational Safety and Health Administration) training, is preferred.Requirements:, • High School Diploma or Equivalent, • Valid driver's license, • Pass a background check, • Ability to lift and carry 50 lbs., • Must be able to climb a ladder safely, able to work at elevated heights, such as on rooftops or elevated structures, while adhering to proper safety protocols., • Ability to work outdoors in various weather conditions, including heat, cold, rain, and sunlight., • Must be capable of lifting and carrying heavy equipment and materials, including solar panels and mounting hardware., • Must have the stamina and endurance to perform physically demanding tasks throughout the workday., • Willingness to travel as needed ( to be discussed in interview), • Military service is a plusCompensation and Benefits, • $22 - $30 per hour commensurate with experience, • Medical, Dental, and Vision Insurance, • Company paid Life Insurance, • Company paid short-term disability, • 401(k) Plan, • PTO, Vacation & Holidays

Job DescriptionJob Title: Electrician Foreman Job Description Lead large commercial and industrial electrical projects, typically valued at $100K or more, while overseeing installation quality, safety, productivity, and crew development. Serve as the on-site authority for planning, sequencing, and problem-solving across a variety of electrical and solar projects. Responsibilities • Lead and manage daily field operations on large commercial and industrial electrical projects., • Ensure all work meets safety, quality, and productivity standards in alignment with company procedures and project specifications., • Act as the on-site authority for planning, sequencing, scheduling, and resolving technical and logistical issues., • Communicate professionally and consistently with customers, inspectors, vendors, and subcontractors to coordinate work and resolve issues., • Mentor, train, and support apprentices and lead electricians in troubleshooting and technical tasks., • Drive project close-out activities, including punch lists, labeling, testing, commissioning, and documentation., • Perform and oversee conduit installation, gear setting, panel wiring, service terminations, EV infrastructure installation, and lighting upgrades., • Ensure all work complies with the National Electrical Code (NEC), company standards, and project-specific requirements., • Read, interpret, and apply information from one-line diagrams, electrical blueprints, schematics, and other technical documents., • Coordinate construction activities such as installation, pulling wire, terminations, and equipment layout to maintain project schedules., • Support solar-related work scopes, including solar mechanical, solar AC, and related electrical installations, as needed., • Monitor crew performance, provide feedback, and foster a culture of safety, accountability, and continuous improvement., • Assist with material planning, tool and equipment coordination, and site logistics to minimize downtime., • Identify potential issues early and collaborate with stakeholders to develop effective solutions.Essential Skills, • 3–5 years of electrical experience in the field., • 3–5 years of commercial electrical experience., • 3+ years of experience leading crews on construction or electrical projects., • Strong hands-on experience with conduit installation, wiring, pulling wire, and terminations., • Proficiency in reading and interpreting electrical blueprints, one-line diagrams, and schematics., • Ability to execute work in accordance with the National Electrical Code (NEC) and project specifications., • Experience with commercial and industrial electrical installations, including gear setting, panel wiring, and service terminations., • Capability to oversee and perform EV infrastructure installations and lighting upgrades., • Demonstrated leadership skills with the ability to mentor apprentices and leads., • Effective verbal and written communication skills for interaction with customers, inspectors, vendors, and subcontractors., • Strong troubleshooting and problem-solving abilities in electrical and construction environments., • Solid understanding of construction site safety practices and standards.Additional Skills & Qualifications, • Journeyman electrician license preferred., • Indiana Electrical Master’s License preferred but not required., • Medium voltage experience is highly desirable., • OSHA 10 or OSHA 30 certification preferred., • First Aid and CPR certifications preferred., • MEWP, scissor lift, and cherry picker certifications preferred., • Familiarity with Job Tread or similar construction/project management software., • Experience in solar mechanical, solar AC, and solar electrical installations is a plus., • Ability to work on traveling projects across Indiana and nearby states., • Comfort working on both smaller electrical projects and larger solar projects., • Strong organizational skills with the ability to manage multiple tasks and priorities in the field.Why Work Here? Join a company that invests in your long-term growth and financial well-being through comprehensive benefits and structured career development. Enjoy paid standard federal holidays and a progressive PTO program, with one week of PTO after six months and two weeks after one year, including the ability to roll over a portion of unused time. Advance your career with tuition assistance for licensing and earn a $1 per hour pay increase for each completed year of schooling, rewarding your commitment to professional development. Benefit from retirement savings support through a 401(k) plan and access to a Health Savings Account (HSA), helping you plan for both your future and your healthcare needs. Work Environment Work primarily takes place on commercial and industrial construction sites, including both electrical and solar project environments. The role involves field-based work on traveling projects across Indiana and nearby states, with exposure to active job sites, varying weather conditions, and typical construction-site noise and activity. You will work with electrical systems, conduit, gear, panels, EV infrastructure, lighting upgrades, and solar installations, using lifts and other construction equipment as required. The position requires adherence to all safety protocols, use of appropriate personal protective equipment, and compliance with site and company safety standards. Work hours follow typical construction schedules and may vary depending on project needs and deadlines. Job Type & Location This is a Permanent position based out of Indianapolis, IN. Pay and Benefits The pay range for this position is $62400.00 - $87360.00/yr. o Standard federal holidays off and paid o PTO: 1 week after 6 months, 2 weeks after 1 year (with 1 week rollover allowed) o Tuition assistance for licensing; $1/hour pay increase for each completed year of schooling o 401k o HSA Workplace Type This is a fully onsite position in Indianapolis,IN. Application Deadline This position is anticipated to close on Apr 24, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description THE OPPORTUNITY The Controls Technician works with the Distillery Controls Engineer administering, maintaining, and upgrading the Distributed Control Systems (DCS), and Operational Technology (OT) systems, providing support for these systems throughout the plant. This role is responsible for the implementation and commissioning of changes to support operational excellence while maintaining cybersecurity integrity of the plant’s virtualized OT environment, ensuring system stability, disaster recovery readiness, and operational continuity. The position supports large-scale DCS hardware and software upgrades, capital projects, and system improvement initiatives, contractors, and budgets to ensure timely and cost-effective project completion. Provides support with troubleshooting, programming modifications, system enhancements, and documentation management while collaborating cross-functionally with Process Engineering, Production, Maintenance, and Quality teams. WHAT YOU WILL BE DOING: Control System Support • Investigate and Analyze control system issues including software, hardware, communication, and instrumentation issues., • Work with Production, Process Engineering, Quality, and/or Maintenance in the completion of continuous improvement projects and capital expansion projects with a primary focus on the debugging / improvement of the control system programming., • Support the long-term goals of upgrading aging infrastructure to stay within the serviceable life of the controls equipment as well as staying abreast of new technologies., • Provide after-hours support as needed whether remote or onsite to accomplish plant goals. OT System Support • Perform routine maintenance and support of both physical and virtualized equipment located throughout the facility, • Ensure physical layer reliability of both the fiberoptic backbone networks and local copper distribution networks., • Work with the Distillery Controls Engineer to maintain regular backups of the entire system implementing both ready-to-deploy backups and disaster recovery efforts. Maintenance Support • Serve as the Liaison between the Maintenance department and the Electrical and Controls Engineering department by regularly participating in morning tool-box meetings, planning meetings, day to day activities, performing plant floor work and annual shutdown planning, coordination and execution., • Provide leadership and hands-on support for a team of contract electricians to maintain 24x7 distillery operations in accordance with company policies and local regulations, • Assist in the planning and scheduling of preventative and corrective electrical/instrumentation maintenance activities across the site including annual shutdown activities. WHO WE ARE LOOKING FOR: • A safety minded individual who possesses an associate’s degree (Required) in either: Electrical Engineering, Electrical Engineering Technology, or Master Electrician Military Electrical Training, or related field., • 2 to 5 years’ experience in plant operations, preferably in distillation and grain processing environment., • Training on the various plant control systems to include DCS programming, HMI screen development, input/output wiring and control system equipment setup, and troubleshooting., • Training in various types of instrumentation and control devices., • Experience working with Maintenance Management System software (SAP Preferred) for entering and tracking and completing reactive and preventive maintenance work orders., • OSHA, Food Safety, and GMP training and/or working experience., • Working knowledge of the NEC and NFPA-70E is required. Experience with DISCUS and NFPA-70B is preferred., • Experience programming in Siemens PCS7, APACS, and/or TI-505 environments along with HMI integration in WinCC or AIMAX, as well as operating controls systems within a virtualized environment, • Demonstrated experience with troubleshooting control systems, especially DCS based systems operating in a virtualized environment., • Knowledge of process instrumentation and applications., • Experience with project development and implementation. Working experience with I/O control devices and various software packages for device configuration, Installation and maintenance experience of electrical equipment in Hazardous Areas., • This position requires strong technical expertise in industrial control systems, instrumentation, virtualized environments, and regulatory standards, along with the ability to respond to critical operational issues, including after-hours support, to maintain plant reliability and performance., • Eagerness and willingness to learn on the plant floor while interacting with personnel with varying levels of experience and knowledge., • Excellent verbal and written communication skills, • Strong technical aptitude and experience in troubleshooting mechanical systems and processing equipment., • Strong multi-tasking skills., • Strong system management skills to prioritize maintenance activities, improvements, and maintaining the system lifecycle of computerized/automated equipment., • Strong computer skills including CMMS (SAP Preferred), AutoCAD, Microsoft Office including Word, Outlook, Excel, and Visio. PHYSICAL REQUIREMENTS: • Includes frequently used office equipment, computer software programs, manuals, books, or other written resources, hand tools, power tools, two-way radios, and other tools/equipment/resources; Includes use of sanitation equipment and lab/field equipment., • Electrical measurement meters and programming devices. Control system programming software including DCS APACS system 4MATION, 505 SoftShop programming for TI 505 series programmable controllers, TA Engineering AIMAX WIN software for operator interface development, Simatic Manager, VMware, PCS7 software, configuration software for Eaton PanelMate flat panel operator screens, MTS level gauge configuration software, AMS software for instrumentation calibration and record keeping, AutoCad for electronic documentation of control systems and project footprint layouts., • Fork truck, JLG man lift, electrician’s hand tools and Arc Flash and other required PPE If you require a reasonable accommodation in the employee selection process, please direct your inquiries to Caitlin Zbikowski, Talent Manager @ . If the above speaks to you, we’re excited to learn more about you! At MGP, we know that our people are our greatest strength. At Lawrenceburg, we are extremely focused on our 2026 Safety initiative, and we hope you want to be a part of that. With different perspectives and unique ways of thinking, our employees are as varied as our products. We believe that inclusivity strengthens the organization and champions a company culture that is evolving to reflect all of us. Culture results from our behaviors, our personal commitment, our curiosity, how we collaborate, and the ways we courageously share our perspectives and expect others to do the same. Each of us can make a difference by fostering thinking and actions that empower us to connect, belong, and grow together. MGP offers exceptional medical, dental, vision, short- and long-term disability, life insurance, 401(k) Match and PTO. All successful candidates for this position will be required to submit to a criminal background check and drug test as well as physical assessment. Candidates will also be required to achieve a qualifying score on a pre-employment mechanical assessment.

Job Description Journeyman Electrician Stable, growth oriented Electrical Contractor is seeking an experienced Journeyman Electrician (Licensed in Indiana or reciprocal state). The ideal candidate will have experience working on commercial construction projects. The growth in our company has developed the need for a licensed (Journeyman) Electrician that can bring their Two to Eight (2 to 8) years of electrical experience and contribute to the continued growth. We are seeking an individual that can bend conduit, pull cable/wire, troubleshoot circuits, light fixtures, circuit breakers and more to ensure they are in safe operating condition. You’ll also use excellent communication skills to ensure the highest standards of safety and recommend necessary changes to keep projects within local code and standards. Essential Responsibilities: · Assemble, install, test, and maintain electrical or electronic wiring system · Diagnose malfunctioning systems, test electrical components and continuity of circuits to locate the cause of the breakdown and correct the issue · Installation/repair/maintenance of circuit breakers, transformers, generators, and security systems · Install MC cable, panels, conduit feeders, branch circuits, devices, lighting, and fixtures · Responsible for understanding and reading blueprints, plans, drawings, specifications, and work orders to determine work requirements · Able to organize work, run teams and safely manage projects from start to finish · Continually updating knowledge by participating in educational opportunities Essential Qualifications: · Indiana Journeyman licensed / card is Preferred or Equivalent experience · Two -Eight (2 to 8) years of experience in an electrician position · Self-motivated capable of working independently and with a team · Must have strong written and communication skills · Positive attitude and professional customer service · Able and willing to work in all aspects of the electrical industry residential and service work · Basic Math Skills · Ability to read blueprints and technical diagrams · Clean driving record · Able to bend small and large conduit, troubleshoot circuits, pull cable, rough in, service transformers · Working with and being exposed to 240 volts · Must possess a strong attention to detail · Able to take and give instruction and act on them · Knowledge of safety procedures • Knowledge of and experience with National Electric Code and any relevant local codes, • Ability to pass a criminal background check and pre-employment drug screening We are a recognized leader in the industry yet small enough so that you will be recognized for the contributions you make. We are proud of our exciting, dynamic, and fast paced working environment. Our company is an equal employment opportunity company with a drug free workplace. In addition to our competitive wages and incentives we provide professional and career growth opportunities. We hire only the best and the brightest, if you consider yourself motivated, safety conscious and take pride in your workmanship please forward your resume today to Human Resources. Company DescriptionGreat company to work with.Great company to work with.

Job Description Arconic is seeking a General Electrician to join our Aluminum Extrusion (AEX) business unit in Lafayette, IN. Arconic creates breakthrough products that shape industries. Working in close partnership with our customers, we solve complex engineering challenges to transform the way we fly, drive, build, and power. Through the ingenuity of our people and cutting-edge advanced manufacturing techniques, we deliver these products at a quality and efficiency that ensures customer success. Excellent Pay: $39.28 - $40.75/hr Benefits Package: (Benefits start day 1) Medical, Dental, Vision, Prescription, and 401K with company match up 6%. Plus 2 weeks of paid vacation after 6 months and 1000 hours worked. Schedule: Must be willing to work a fixed or rotating 24X7 work schedule (8- or 12-hour shifts). You may be required to work evenings, nights, holidays, and overtime. Primary Functions of the Job: • Install, inspect, test, troubleshoot, repair, and maintain electrical and electronic equipment and systems, including recording/controlling equipment and computer peripherals., • Refrigeration/air-conditioning, pyrometric and combustion equipment; power generation, rectifying, and distribution systems. Materials Used, Processed, and Handled: • All types of wire, cable, fiber optic, conduit, fittings, fasteners, and composition and insulating materials., • Soldering, welding, and brazing materials., • Solvents, cleaning materials and acids, lubricants and transformer oils, inks., • Natural, refrigeration, and various other gases such as nitrogen, chlorine, and ether., • Adhesives, paint, aluminum oxide, and mercury; all types of electrical and electronic equipment and parts. Tools and Equipment Used: • Various poser and manual hand tools common to the trade, saws, drill presses, sanders, lathes, threading machines, pipe benders, soldering, brazing, welding, and cutting equipment, and mechanical taping equipment., • Ladders, scaffolding, cranes, man lifts, earth angers, line trucks, and industrial vehicles., • Wet/dry cleaning equipment., • Bearing pullers, vacuum pumps, coil winders, thermocouples, two-way radios, various measuring and testing equipment such as thermometers, micrometers, voltmeters, ammeters, frequency meters, pyrometers, psychrometers, gas analyzer, signal generators, oscilloscopes, vibration analyzers, ultrasonic testers, infrared equipment, and other special recording and alignment equipment., • Various types of safety devices; video display terminals and program units. Basic Qualifications: • Candidate must have a Journeyman Certificate with experience in Industrial Electricity or equivalent experience., • Satisfactorily pass a comprehensive online and hands-on skills test., • Pass a physical examination, drug screen test, and background check., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. §730, et seq.) and/or the International Traffic in Arms Regulations (ITAR). Qualified candidate must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or be eligible to obtain the required authorizations from the relevant government agency. Business demands may require employer to proceed with candidates who are immediately eligible to access controlled technology. Preferred Qualifications: • Experience required in installation and troubleshooting of PLC’s, CNC equipment, A.C./D.C. servo systems, A.C. frequency drives, power distribution, and electrohydraulic systems., • Capable of installing and debugging new or retrofitted automation equipment and able to modify or write PLC logic. -Or a Journeyman’s card (A Department of Labor Certificate or Equal). Testing and a skills demonstration will be required. Permanent employment subject to a probation period not to exceed 6 months., • If you are not currently working as a general electrician, proof of experience and/or a copy of your Journeyman’s card must accompany your bid. Thank you for your interest in Arconic. For those who qualify, please submit your most up-to-date resume. We look forward to hearing from you.

Job DescriptionDescription: Stones River Electric is seeking a Commercial Service Electrician to support our growing national operations, offering competitive hourly rates based on experience. This role requires a skilled electrician who can troubleshoot, work independently, and handle service work across commercial environments including retail, office, and industrial facilities. Responsibilities include diagnosing electrical issues, performing repairs, and ensuring work is completed safely and efficiently. The ideal candidate is dependable, self-sufficient in the field, and able to take ownership of their work with minimal supervision. This position requires travel based on project needs, including out-of-town and overnight stays. Requirements: Requirements: • 5+ years of commercial electrical experience, • Strong troubleshooting and problem-solving skills, • Ability to work independently and manage workload in the field, • Experience operating a service van or bucket truck, • Comfortable using basic technology (iPad, etc.), • Good communication skills, • Valid driver’s license with acceptable driving record, • Company vehicle, gas card, and company credit card, • Phone reimbursement, • Medical, dental, and vision insurance, • Paid holidays and vacation, • 401k with company match, • Sign on and referral bonuses after 90 days Unsolicited submissions or outreach from third-party agencies or recruiters will not be considered. We will engage only with approved recruiting partners who have an active, written agreement with our organization for this specific position.

Job Description Who We Are Evergreen Fire and Security (EFS) is a recognized leader in the life safety and security solutions industry. We are entrusted by the Federal Government and commercial customers to protect lives, critical infrastructure, and information by providing and maintaining technically advanced and innovative fire alarm, access control, intrusion detection, CCTV, mass notification, and other critical protection systems. The Key to Our Success Our success is largely due to the experience, skills, and expertise of the best and brightest employees in the industry. Due to growth, we are looking for additional qualified experts to join the Evergreen team. Think you have what it takes? Great! We welcome you to submit your qualifications for this great Evergreen Fire and Security career opportunity. The Opportunity This opportunity as a Traveling Electronic Security Systems Technician is perfect for an experienced low-voltage technician who enjoys traveling! The Responsibilities • Installs, repairs, tests, and maintains security projects, • Serves as the face of Evergreen to our customers onsite by providing top-notch service and product training, • Ensures safety through compliance with relevant State and Federal regulations, • Handles service orders and project administration, • Ability to travel extensively, • Valid CPR/First Aid card, • Valid electrician certificate or trainee card, • High school diploma or equivalent, • Electrical wiring experience, • Basic computer skills (Microsoft Office), • Good communication skills to interface with customers, • Ability to call and schedule appointments, follow instructions, and understand code requirements, • Attention to detail, • Ability to work autonomously, • Ability to work well with others and come to work with a positive attitude, • Valid driver’s license and proof of minimum liability insurance, • Relevant factory certifications and knowledge are always a plus. Great examples include:, • Lenel, • DAQ Access Control/IDS, • Milestone CCTV, • Pelco CCTV, • Monitor Dynamics Access Control/IDS, • AMAG, • Various DDC and Building Utility Control Systems, • Prior experience working on government contracts or military bases Here at Evergreen, we pay competitive wages and benefits, but we also go the extra mile for our Technicians, and even more so for those who travel frequently. Sound good? Check these out: Awesome Travel Perks! • Additional weeks of paid leave for extended travel—up to 320 additional hours of time off!, • Paid flights for weekends at home for regional travel, • Weekly per diem for meals, incidentals, and lodging paid to you, • Paid TSA Pre-Check, • Competitive pay, • Paid Time Off (PTO), • Paid holidays, • Medical, dental, and vision insurance plans, • 401(k) plan, • Up to 4% match available, • 100% vested from day one, • Healthcare flexible spending accounts, • Dependent care flexible spending accounts, • Employee Assistance Program (EAP), • Company-sponsored group term life insurance, • Corporate perks program We also offer opportunities for training and advancement in a fast-paced, inclusive, and rewarding working environment. Check us out on Facebook, LinkedIn, or at . Evergreen Fire & Security is a US government contractor with sensitive access requirements. As our employee, you must also be able to satisfy federal government requirements for access to government information. Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. citizenship due to the level of access to sensitive information and/or restricted facilities. Evergreen Fire and Security is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, training, and career development programs. Powered by JazzHR iZ90hWUXwW

Job Description * Licensed Residential Service Technicians – Electrical, Plumbing, HVAC, and Drain Huntington, IN Sponsored by Peakzi — identifying the best technicians. Overview We’re partnering with the most respected home service companies to grow their team of licensed residential service professionals — including Electricians, Plumbers, HVAC Technicians, and Drain/Sewer Specialists. If you take pride in your craft, value customer relationships, and want to join a high-performing team with strong growth opportunities, this is your next step. The Role As a Residential Service Technician, you’ll work directly with homeowners to diagnose, repair, and install systems in your trade area — delivering top-quality workmanship and five-star customer service every time. You’ll join a professional environment where your technical expertise, communication, and care for customers make an impact every day. Responsibilities: * Diagnose, repair, and maintain residential systems (electrical, plumbing, HVAC, or drains). * Perform installations, replacements, and upgrades — from panels and wiring to water heaters, filtration systems, and HVAC units. * Deliver clear, professional communication with customers — explain findings, provide options, and ensure satisfaction. * Maintain safety and code compliance at all times (OSHA, NEC, IPC, etc.). * Work collaboratively with dispatch, management, and teammates for seamless service delivery. * Maintain your company-provided vehicle, tools, and workspace to a professional standard. * Participate in ongoing technical and leadership training. Qualifications Required: * Active state trade license (Journeyman/Master Electrician, Plumber, HVAC Technician, or equivalent). * Minimum 2+ years of residential service experience. * Valid driver’s license and clean driving record. * Ability to lift 50+ lbs, climb ladders, and work in crawlspaces or attics. * Strong customer service and problem-solving skills. Preferred: * OSHA 10 or 30 Certification. * Leadership or mentoring experience. * Familiarity with dispatch systems or digital service platforms. What’s Offered: * Competitive pay structure with performance bonuses. * Company vehicle, uniforms, and tools provided. * Year-round, full-time work — no seasonal layoffs. * Health, dental, and vision insurance options. * Paid time off, holidays, and 401(k) matching. * Career growth opportunities with technical and leadership training. About Peakzi Peakzi partners with leading home service companies to identify and connect top-tier technicians who embody professionalism, reliability, and skill. Our mission is to match great talent with great teams — helping the trades grow stronger through AI-driven insights and human connection. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Veterans are encouraged to apply. If you require reasonable accommodation during the application process, please contact us directly.

Job DescriptionDescription:Description Company information: Volumod is a modular manufacturing group of partners located in Indianapolis, Indiana. Volumod is looking to change the lives of thousands of individuals and families in the state of Indiana by providing rapid response, high quality single and multi-family housing solutions to communities in need of affordable housing. Our investors are also proven community developers who share a mission to create affordable modular homes for Indiana by leveraging renewable resources, designing smart homes, and caring for everyone. Our Vision is to see the people of Indiana renewed by great jobs and homes that improves lives. Volumod is a fully integrated business model designed to manufacture modular solutions for our investors who provide the opportunity to control each project and all manufactured product from land to lockup. The factory is forecasted to manufacture up to 1,000,000 sq/ft over the first four years. Responsibilities: Works in a safe manner following all safety policies while performing job duties. Maintains open communication with supervisor regarding safety concerns and assembly of building components. Follows work orders and instructions in order to accurately and efficiently prepare and assemble building components based on assigned production area (construction worker, electrician, drywaller, framing carpenter, trim carpenter). Framer - Preparation and assembly of various building components and materials. May be cross trained across various line assembler duties to ensure job knowledge progression and a balanced work force. Meets weekly production goals per assigned production supervisor or team lead. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Maintains and keeps tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. Benefits: Volumod offers a comprehensive and competitive benefits package designed to support our employees’ health, financial well-being, and work-life balance. Eligible employees receive medical, dental, and vision insurance, along with company-paid life and disability coverage. We provide a 401(k) plan with company contributions, generous paid time off, and paid holidays. Additional benefits include ancillary coverage such as critical illness, hospitalization, accident, tuition reimbursement, employee assistance programs, and production bonus programs. Our goal is to invest in our team by providing meaningful benefits that help you thrive both personally and professionally. We are not accepting candidates from recruiters or staffing firms. Requirements: Must be at least 18 years of age This is a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. GED or High school diploma Experience in one or more of the relevant production areas is preferred (construction, electrician, drywaller, trim carpenter, framing carpenter, general labor). Work is conducted inside a warehouse environment We are a 2nd Chance employer.

Job DescriptionDescription:Description Company information: Volumod is a modular manufacturing group of partners located in Indianapolis, Indiana. Volumod is looking to change the lives of thousands of individuals and families in the state of Indiana by providing rapid response, high quality single and multi-family housing solutions to communities in need of affordable housing. Our investors are also proven community developers who share a mission to create affordable modular homes for Indiana by leveraging renewable resources, designing smart homes, and caring for everyone. Our Vision is to see the people of Indiana renewed by great jobs and homes that improves lives. Volumod is a fully integrated business model designed to manufacture modular solutions for our investors who provide the opportunity to control each project and all manufactured product from land to lockup. The factory is forecasted to manufacture up to 1,000,000 sq/ft over the first four years. Responsibilities: Works in a safe manner following all safety policies while performing job duties. Maintains open communication with supervisor regarding safety concerns and assembly of building components. Follows work orders and instructions in order to accurately and efficiently prepare and assemble building components based on assigned production area (construction worker, electrician, drywaller, framing carpenter, trim carpenter). Some of the specific responsibilities for the various production areas include but are not limited to: Carpenter - Preparation and assembly of various building components and materials. Electrician - Prepare framing for wiring and install wiring, receptacles, pull down bars, fasteners, leno sheets, and breaker boxes. Drywaller – Tape drywall seams, mix and apply mud to taped drywall seams, apply vapor barrier and texturing material using spray gun, apply texturing design, and clean and maintain equipment. Plumber - Prepare new construction home with all fittings and installation of plumbing materials HVAC - Installation of ducts, furnaces and air conditioners for new home construction Final finish (construction clean) - Making sure all elements completed in the production process are clean and to Volumod standards before a home is released Painters - Responsible for commercial painting of the internal walls of a new home May be cross trained across various line assembler duties to ensure job knowledge progression and a balanced work force. Meets weekly production goals per assigned production supervisor or team lead. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Maintains and keeps tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. Benefits: Volumod offers a comprehensive and competitive benefits package designed to support our employees’ health, financial well-being, and work-life balance. Eligible employees receive medical, dental, and vision insurance, along with company-paid life and disability coverage. We provide a 401(k) plan with company contributions, generous paid time off, and paid holidays. Additional benefits include ancillary coverage such as critical illness, hospitalization, accident, tuition reimbursement, employee assistance programs, and production bonus programs. Our goal is to invest in our team by providing meaningful benefits that help you thrive both personally and professionally. We are not accepting candidates from recruiters or staffing firms. Requirements: Must be at least 18 years of age This is a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. GED or High school diploma Experience in one or more of the relevant production areas is preferred (construction, electrician, drywaller, trim carpenter, framing carpenter, general labor). Most positions - work is conducted inside a warehouse environment We are a 2nd Chance employer.

Job DescriptionDescription: Company information: Volumod is a modular manufacturing group of partners located in Indianapolis, Indiana. Volumod is looking to change the lives of thousands of individuals and families in the state of Indiana by providing rapid response, high quality single and multi-family housing solutions to communities in need of affordable housing. Our investors are also proven community developers who share a mission to create affordable modular homes for Indiana by leveraging renewable resources, designing smart homes, and caring for everyone. Our Vision is to see the people of Indiana renewed by great jobs and homes that improves lives. Volumod is a fully integrated business model designed to manufacture modular solutions for our investors who gain the opportunity to control each project and all manufactured product from land to lockup. The factory is forecasted to manufacture up to 1,000,000 sq/ft over the first four years. Works in a safe manner following all safety policies while performing job duties. Maintains open communication with supervisor regarding safety concerns and assembly of building components. Follows work orders and instructions in order to accurately and efficiently prepare and assemble building components based on assigned production area (construction worker, electrician, drywaller, framing carpenter, trim carpenter). Some of the specific responsibilities for the various production areas include but are not limited to: • Carpenter - Preparation and assembly of various building components and materials., • Electrician - Prepare framing for wiring and install wiring, receptacles, pull down bars, fasteners, leno sheets, and breaker boxes., • Drywaller – Tape drywall seams, mix and apply mud to taped drywall seams, apply vapor barrier and texturing material using spray gun, apply texturing design, and clean and maintain equipment., • Siding - install exterior siding to homes, • Roofers - Install and complete all aspects of roofing to homes, • Plumbers - install plumbing on new homes May be cross trained across various line assembler duties to ensure job knowledge progression and a balanced work force. Meets weekly production goals per assigned production supervisor or team lead. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Maintains and keeps tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. Benefits: Volumod offers a comprehensive and competitive benefits package designed to support our employees’ health, financial well-being, and work-life balance. Eligible employees receive medical, dental, and vision insurance, along with company-paid life and disability coverage. We provide a 401(k) plan with company contributions, generous paid time off, and paid holidays. Additional benefits include ancillary coverage such as critical illness, hospitalization, accident, tuition reimbursement, employee assistance programs, and production bonus programs. Our goal is to invest in our team by providing meaningful benefits that help you thrive both personally and professionally. We are not accepting candidates from recruiters or staffing firms. Requirements: • Must be at least 18 years of age, • This is a physically demanding job requiring the ability to lift 40+ pounds, grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment., • GED or High school diploma, • Experience and/or training in the department you are applying for (plumbing, electrical, HVAC, framing, carpenter, cabinets, drywall, doors, trim, exteriors, windows) Preferred qualifications for production department positions include: • Construction or warehouse experience preferred along with skill in the operation and control of hand tools (tape measure, hammer, utility knife, etc.) and power tools (circular saws, table saws, drills, etc.)., • Must be able to pass a pre-employment drug screen., • Ability to work in a team, to be trained, and take direction., • Flexible to work in a fast paced, changing environment., • Not afraid to get dirty and handle tools/equipment daily., • Work is conducted inside a warehouse environment We are a 2nd Chance employer.

Job DescriptionDescription: Stones River Electric is seeking a Commercial Service Electrician to support our growing national operations, offering competitive hourly rates based on experience. This role requires a skilled electrician who can troubleshoot, work independently, and handle service work across commercial environments including retail, office, and industrial facilities. Responsibilities include diagnosing electrical issues, performing repairs, and ensuring work is completed safely and efficiently. The ideal candidate is dependable, self-sufficient in the field, and able to take ownership of their work with minimal supervision. This position requires travel based on project needs, including out-of-town and overnight stays. Requirements: Requirements: • 5+ years of commercial electrical experience, • Strong troubleshooting and problem-solving skills, • Ability to work independently and manage workload in the field, • Experience operating a service van or bucket truck, • Willingness and ability to travel as needed, including overnight stays, • Comfortable using basic technology (iPad, etc.), • Good communication skills, • Valid driver’s license with acceptable driving record, • Company vehicle, gas card, and company credit card, • Phone reimbursement, • Medical, dental, and vision insurance, • Paid holidays and vacation, • 401k with company match, • Sign on and referral bonuses after 90 days Unsolicited submissions or outreach from third-party agencies or recruiters will not be considered. We will engage only with approved recruiting partners who have an active, written agreement with our organization for this specific position.

Job DescriptionDescription: Stones River Electric is seeking a Commercial Service Electrician to support our growing national operations, offering competitive hourly rates based on experience. This role requires a skilled electrician who can troubleshoot, work independently, and handle service work across commercial environments including retail, office, and industrial facilities. Responsibilities include diagnosing electrical issues, performing repairs, and ensuring work is completed safely and efficiently. The ideal candidate is dependable, self-sufficient in the field, and able to take ownership of their work with minimal supervision. This position requires travel based on project needs, including out-of-town and overnight stays. Requirements: Requirements: • 5+ years of commercial electrical experience, • Strong troubleshooting and problem-solving skills, • Ability to work independently and manage workload in the field, • Experience operating a service van or bucket truck, • Willingness and ability to travel as needed, including overnight stays, • Comfortable using basic technology (iPad, etc.), • Good communication skills, • Valid driver’s license with acceptable driving record, • Company vehicle, gas card, and company credit card, • Phone reimbursement, • Medical, dental, and vision insurance, • Paid holidays and vacation, • 401k with company match, • Sign on and referral bonuses after 90 days Unsolicited submissions or outreach from third-party agencies or recruiters will not be considered. We will engage only with approved recruiting partners who have an active, written agreement with our organization for this specific position.

Job DescriptionDescription:Description Company information: Volumod is a modular manufacturing group of partners located in Indianapolis, Indiana. Volumod is looking to change the lives of thousands of individuals and families in the state of Indiana by providing rapid response, high quality single and multi-family housing solutions to communities in need of affordable housing. Our investors are also proven community developers who share a mission to create affordable modular homes for Indiana by leveraging renewable resources, designing smart homes, and caring for everyone. Our Vision is to see the people of Indiana renewed by great jobs and homes that improves lives. Volumod is a fully integrated business model designed to manufacture modular solutions for our investors who provide the opportunity to control each project and all manufactured product from land to lockup. The factory is forecasted to manufacture up to 1,000,000 sq/ft over the first four years. Responsibilities: Works in a safe manner following all safety policies while performing job duties. Maintains open communication with supervisor regarding safety concerns and assembly of building components. Follows work orders and instructions in order to accurately and efficiently prepare and assemble building components based on assigned production area (construction worker, electrician, drywaller, framing carpenter, trim carpenter). Some of the specific responsibilities for the various production areas include but are not limited to: Carpenter - Preparation and assembly of various building components and materials. Electrician - Prepare framing for wiring and install wiring, receptacles, pull down bars, fasteners, leno sheets, and breaker boxes. Drywaller – Tape drywall seams, mix and apply mud to taped drywall seams, apply vapor barrier and texturing material using spray gun, apply texturing design, and clean and maintain equipment. Plumber - Prepare new construction home with all fittings and installation of plumbing materials HVAC - Installation of ducts, furnaces and air conditioners for new home construction Final finish (construction clean) - Making sure all elements completed in the production process are clean and to Volumod standards before a home is released Painters - Responsible for commercial painting of the internal walls of a new home May be cross trained across various line assembler duties to ensure job knowledge progression and a balanced work force. Meets weekly production goals per assigned production supervisor or team lead. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Maintains and keeps tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. Benefits: Volumod offers a comprehensive and competitive benefits package designed to support our employees’ health, financial well-being, and work-life balance. Eligible employees receive medical, dental, and vision insurance, along with company-paid life and disability coverage. We provide a 401(k) plan with company contributions, generous paid time off, and paid holidays. Additional benefits include ancillary coverage such as critical illness, hospitalization, accident, tuition reimbursement, employee assistance programs, and production bonus programs. Our goal is to invest in our team by providing meaningful benefits that help you thrive both personally and professionally. We are not accepting candidates from recruiters or staffing firms. Requirements: • Must be at least 18 years of age, • This is a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment., • GED or High school diploma, • Experience in one or more of the relevant production areas is preferred (construction, electrician, drywaller, trim carpenter, framing carpenter, general labor). Most positions - work is conducted inside a warehouse environment We are a 2nd Chance employer.

Job DescriptionDescription:Description Company information: Volumod is a modular manufacturing group of partners located in Indianapolis, Indiana. Volumod is looking to change the lives of thousands of individuals and families in the state of Indiana by providing rapid response, high quality single and multi-family housing solutions to communities in need of affordable housing. Our investors are also proven community developers who share a mission to create affordable modular homes for Indiana by leveraging renewable resources, designing smart homes, and caring for everyone. Our Vision is to see the people of Indiana renewed by great jobs and homes that improves lives. Volumod is a fully integrated business model designed to manufacture modular solutions for our investors who provide the opportunity to control each project and all manufactured product from land to lockup. The factory is forecasted to manufacture up to 1,000,000 sq/ft over the first four years. Responsibilities: Works in a safe manner following all safety policies while performing job duties. Maintains open communication with supervisor regarding safety concerns and assembly of building components. Follows work orders and instructions in order to accurately and efficiently prepare and assemble building components based on assigned production area (construction worker, electrician, drywaller, framing carpenter, trim carpenter). May be cross trained across various line assembler duties to ensure job knowledge progression and a balanced work force. Meets weekly production goals per assigned production supervisor or team lead. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Maintains and keeps tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. Benefits: Volumod offers a comprehensive and competitive benefits package designed to support our employees’ health, financial well-being, and work-life balance. Eligible employees receive medical, dental, and vision insurance, along with company-paid life and disability coverage. We provide a 401(k) plan with company contributions, paid time off, and paid holidays. Additional benefits include ancillary coverage such as critical illness, hospitalization, accident, tuition reimbursement, employee assistance programs, and production bonus programs. Our goal is to invest in our team by providing meaningful benefits that help you thrive both personally and professionally. This is a fast paced fun environment where a trade can be learned, a sacred space created, and a life can be transformed. We are not accepting candidates from recruiters or staffing firms. Requirements: • Must be at least 18 years of age, • This is a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment., • GED or High school diploma, • Experience in one or more of the relevant production areas is preferred (construction, electrician, drywaller, trim carpenter, framing carpenter, general labor). We are a 2nd Chance employer.

Job DescriptionDescription: Stones River Electric is seeking a Commercial Service Electrician to support our growing national operations, offering competitive hourly rates based on experience. This role requires a skilled electrician who can troubleshoot, work independently, and handle service work across commercial environments including retail, office, and industrial facilities. Responsibilities include diagnosing electrical issues, performing repairs, and ensuring work is completed safely and efficiently. The ideal candidate is dependable, self-sufficient in the field, and able to take ownership of their work with minimal supervision. This position requires travel based on project needs, including out-of-town and overnight stays. Requirements: Requirements: • 5+ years of commercial electrical experience, • Strong troubleshooting and problem-solving skills, • Ability to work independently and manage workload in the field, • Experience operating a service van or bucket truck, • Willingness and ability to travel as needed, including overnight stays, • Comfortable using basic technology (iPad, etc.), • Good communication skills, • Valid driver’s license with acceptable driving record, • Company vehicle, gas card, and company credit card, • Phone reimbursement, • Storage unit for materials and equipment, • Benefits:, • Medical, dental, and vision insurance, • Paid holidays and vacation, • 401k with company match, • Sign on and referral bonuses after 90 days Unsolicited submissions or outreach from third-party agencies or recruiters will not be considered. We will engage only with approved recruiting partners who have an active, written agreement with our organization for this specific position.