Offres Engineering à Rancho Cucamonga, CaliforniaCréer des alertes d'emploi

The Senior Process Engineer supports efforts throughout the company to optimize the operation, performance, and efficiency of all manufacturing processes. CalPortland is proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That’s why we give you a wide range of benefits to choose from. • Medical, Dental, Vision, • low-cost premiums even for family coverage, • Company-paid life/AD&D insurance, • Company-paid short-term disability, • Paid sick/vacation/holiday, • 401k/Company Funded Pension Program (program is dependent upon location and job type), • Employee Assistance Program (EAP), • Evaluate process conditions, provide analysis, and coordinate the implementation of process improvements in the cement plants and other processes, • Take field measurements, compile process information, perform literature research, and provide data analysis and reporting, • Assist with improving process control, product quality, and efficiencies in the manufacturing process, • Assist the Energy Management Team with identifying and implementing energy efficiency projects, • Assist and develop projects that will help Calportland towards the TCC and California CO2 emission goals, • Review new capital project equipment and process design, • Design new plant process equipment to optimize plant performance and achieve project objectives, • Evaluate plant emissions and develop solutions to comply with regulations, • Identify problem areas and work with plant personnel, engineering, and environmental staff to design and implement solutions, • Work with automation and control systems and, if required, assist with software and graphics development., • Assist with new process area system start-up and commissioning, • Manage capital improvement projects as assigned, • Minimum of 7 years of experience in cement manufacturing, • Will be required to travel to company facilities and other locations, • Must be a self-starter and be able to work independently, • Must be able to work cooperatively with plant and corporate personnel, • Must have the ability to multi-task with competing priorities, • Must have excellent communication and interpersonal skills, • Will be required to lead meetings, maintain records, develop reports, and make presentations #LI-MF1

Job Description About New World Medical Founded in 1990, New World Medical is a mission-driven company focused on preserving and enhancing vision through innovative ophthalmic surgical devices, including the Ahmed Glaucoma Valve and Kahook Dual Blade. We partner closely with eye care professionals to deliver tools that improve clinical outcomes and patient care. Guided by our core values - Gratitude, Collaboration, and Impact, we strive to make a meaningful impact in eye health worldwide. In support of our global mission, we proudly donate surgical equipment to charitable organizations to expand access to quality eye care. Benefits starting Day One: • Medical, Dental, and Vision Insurance, • 401(k) with Profit Share, • Bonus Opportunities, • Free Onsite Daily Lunches to foster team connection, • Career Development Program, • Tuition Assistance (after 1 year of service), • Cell Phone & Home Office Stipends, • Wellness & Employee Assistance Programs, • Company Events & Recognition JOB SUMMARY: This position administrates regulatory compliance activities related to New World Medical’s (NWM) Supplier Management. Responsible for establishing the system for managing suppliers which includes establishing systems for the approval, monitoring and validation of the suppliers. This role is the technical liaison between our suppliers and R&D/Sustaining Engineering. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: • Lead PPAP process with suppliers to establish robust validated processes including measurement methodologies (Gage R&R)., • Leads the qualification and maintenance process for suppliers, including initial and routine supplier evaluation and audits as required., • Responsible for supporting Development, Engineering and Manufacturing to resolve technical issues and implement supplier corrective and preventive action (SCAR)., • Works with suppliers and New World Medical’s R&D, Sustaining and Production Department to establish, maintain, and assess associated risks of their controlled manufacturing processes., • Builds and maintains relationships with suppliers to establish and verify/audit control methods suitable to the nature of the parts they supply and ensure clear communication of New World requirements to all levels of manufacturing., • Works with suppliers to establish a structured approach for consistency and adherence to quality procedures and requirements., • Schedules, manages, and conducts audits of New World Medical existing and potential new suppliers to assess compliance to all applicable Standards, Regulations, and New World Medical Requirements., • Participates in External Quality Audits as a process subject matter expert., • Identifies compliance risks to current standards / regulations and assist in the planning and execution of Quality System improvements to mitigate those risks., • Drives continuous improvement efforts, through facilitating, leading, and collaborating with cross functional teams including NWM and suppliers., • Works closely with QA team to manage suppliers to ensure product quality., • Follows up with non-conformances during in-process inspection, pre-shipment inspection, quality complaints from internal customers, product returns and safety recalls. Identify / drive root cause analysis, corrective action and preventive action implementation., • Expected travel for this position is approximately 20%-30%. KNOWLEDGE, SKILLS AND ABILITIES: • Strong organizational, time management and project management skills with attention to detail., • Must have effective communication skills., • Able to work autonomously and independently., • Must be a team player and have a strong work ethic., • Demonstrated ability to lead, acknowledge, develop, communicate & implement strategies for developing new supplier, including qualification. EDUCATION AND EXPERIENCE: • Bachelor’s degree in an engineering or science field required., • 8+ years of experience with 5+ years of experience in medical device industry preferred., • Direct experience with supplier producing product and parts in a regulatory environment (i.e. GMPs, ISO13485, 21 CFR Part 820, etc.) preferred., • Must have knowledge of Quality Engineering discipline, including statistics., • Strong working knowledge of DMAIC/Six Sigma problem solving process. Belt certified is a plus., • Competent in Process Audit, CAPA, PPAP, Equipment Validation and Gage R&R., • Certified Auditor Qualification or equivalent is required. PHYSICAL REQUIREMENTS: • Must be able to remain in a stationary position at least 50% of the time., • Occasionally move about inside the office and travel to and from office buildings to access file cabinets, employee offices, office machinery, etc. This may include, but is not limited to, bending and walking., • Must be able to operate a computer and other office productivity machinery, such as a computer printer, computer keyboard, calculator, etc., • Ability to listen and speak with employees and suppliers. Must be able to exchange accurate information in these situations., • View and type on computer screens for long periods of time. This description reflects management’s assignment of essential functions, it does not proscribe or restrict the tasks that may be assigned. Compensation details: 98000-111000 Yearly Salary PI424bd5717092-25405-39613362

Job DescriptionJob Summary Nongshim America is seeking a dependable and versatile Handyman to support daily maintenance needs at our industrial food manufacturing facility. This role focuses on general repairs, facility upkeep, and light mechanical and electrical support. Candidates should be adaptable, safety-conscious, and willing to assist the maintenance team in troubleshooting equipment when needed. Key Responsibilities * Perform routine facility maintenance, including carpentry, painting, plumbing, and basic repairs. * Assist with minor mechanical and electrical tasks (e.g., replacing parts, resetting equipment, checking motors, basic wiring). * Support maintenance technicians in troubleshooting and preventative maintenance. * Ensure production areas and common spaces are kept clean, safe, and operational. * Conduct inspections and promptly report maintenance issues. * Maintain tools and equipment in good working condition. * Adhere to all food safety, sanitation, and safety protocols required in a food manufacturing environment. Qualifications * Previous experience in general maintenance, construction, or handyman work required. * Basic understanding of mechanical and electrical systems (industrial experience helpful but not required). * Comfortable assisting with troubleshooting and supporting maintenance staff. * Ability to perform physically demanding tasks (lifting, bending, prolonged standing). * Strong problem-solving skills, reliability, and self-motivation. Preferred Skills (Not Required, but Strong Plus) * Exposure to industrial mechanical or electrical work. * Experience in food manufacturing or other regulated environments. * Familiarity with OSHA and food safety standards. * Hands-on experience supporting maintenance technicians in equipment repair.

The Quality Process Engineer will be responsible for ensuring that operational processes are stable and capable of the consistent delivery of quality food products produced at DRF facilities. The quality process engineer is responsible and accountable for day-to-day tasks include developing and implementing standard work across facilities, developing and implementing best practices, conducting continuous improvement projects, implementing lean manufacturing techniques, ensuring processes follow food safe practices. This person should have a keen eye for detail and the ability to interface across disciplines and at all levels. General Overall Duties Some of the duties of this position are those described below. This job description does not state or imply that the duties listed are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform any other job-related duties as requested by management. • Ensures that all operational processes are fully documented via SOP / SW (standard work)., • Develop best practices, routines and innovative solutions to improve production rates and quality of output, • Quality engineering support for project-related activities including line extensions, SKU development, process improvements, capital projects etc., • Conducts continuous improvement projects to ensure equipment is running optimally and within the manufacturer’s specifications, • Puts into practice Lean tools promoted by the company, • Develop, configure and optimize industrial processes from inception through to start up and certification, • Assess processes, take measurements and interpret data, • Design, run, test, perform process simulations, and upgrade systems and processes, • Manage cost and time constraints, • Act as in internal consultant to various departments and teams for current interpretation of GMP/SQF/QMS., • Review and approve documents under Change Control ensuring compliance with GMP and regulatory standards., • Support the Risk Management process throughout all quality system elements such as Design Control, Product Surveillance, Field Action, etc. Update risk management file documents as needed., • Provide Quality support for product quality manufacturing issues ensuring compliance with applicable regulations/standards as well as providing sound technical guidance., • Provide guidance and direction on Client and CAPA investigations. Complete NCRs, and CAPAs as required including risk assessments., • Provides technical support and training for affected personnel., • Maintains safe and healthy work environment by ensuring that policies and safety procedures are followed., • Support the technical needs of the company by understanding customer requirements, market demands, and competitors’ capabilities and products, identifying and analyzing trends in technology, understanding and quantifying company strengths and shortcomings and conferring and collaboration with other members of management. Specific Skills and Abilities Required • Process Thinking: Ability to observe and understand how equipment and processes work together to create an output, • Critical Thinking: Able to assess data inputs and determine factual information. Able to ask probing questions to understand an issue or problem., • Communication: Able to clearly express (verbally and written) thoughts and processes in understandable language. In Del Real’s case both in English and Spanish., • Collaboration: Able to work with groups and realize shared outcomes, • Problem Solving: Able to define problems, drive to root cause and collaboratively implement sustainable solutions Qualifications • Mechanically inclined with problem solving aptitude, • Knowledge of manufacturing methods, process & quality standards, • Knowledge of process related standards (USDA and FDA Regulations), • Knowledge of general safety and hygiene practices., • Solid computer skills: Proficient in Microsoft Office Suite Products, • Experience in process simulations, • CAD or Auto-Cad skills preferred Education/Experience • Bachelor’s degree in Industrial or Mechanical Engineering with a minimum of 2 - years of experience in a food processing environment., • Flexible to work weekends, holidays and nights depending on projects, • Bilingual Spanish & English preferred, • Food or Beverage industry experience is preferred

Director of Estimating – Manufacturing & Power Systems Location: Fontana, CA (supporting Dallas, TX facility as well) Travel: ~25–30% domestic & international Compensation: $170,000–$210,000 base + ~15% bonus | Unlimited PTO | Relocation available Relocation assistance packages provided for qualified candidates Overview We are seeking a Director of Estimating to lead and elevate the estimating function for a growing manufacturer of custom power distribution and protection systems. This new position offers an opportunity to refine how projects are scoped, priced, and executed—ensuring accurate, competitive, and profitable bids from the start. Working closely with the General Manager, this leader will own the estimating strategy across multiple product lines and markets, including utilities and data center infrastructure. The Director will play a hands-on role in improving tools, processes, and team alignment, and will serve as an advocate for the estimating department at the leadership table. About the Role The Director of Estimating will oversee a well-established but evolving department consisting of estimators, applications engineers, and project coordinators, with one direct report (Estimating Manager). The goal: to strengthen bid accuracy, shorten turnaround times, and improve margins on high-volume, custom-engineered projects ranging from $250K to $3M. This individual should bring a mix of technical expertise, business acumen, and leadership presence—capable of bridging the gap between estimating, engineering, and operations while mentoring teams and influencing process change. Key Responsibilities • Lead all estimating activities across multiple facilities, ensuring consistency, accuracy, and profitability., • Develop and implement improved estimating tools, templates, and processes that drive efficiency and bid success rates., • Partner closely with the GM and executive leadership to evaluate bid opportunities, assess risk, and align on pricing strategy., • Mentor and guide the Estimating Manager and team, setting clear expectations and fostering professional growth., • Strengthen collaboration across engineering, operations, and business development to support rapid, high-quality proposal delivery., • Review and approve all major estimates and terms, ensuring compliance with internal standards and market competitiveness., • Monitor market and technology trends to inform cost reduction initiatives and estimating best practices., • Engage directly with clients as needed to ensure proposal clarity, credibility, and customer confidence., • Bachelor’s degree in Engineering, Construction Management, or related technical field (preferred)., • Minimum 8 years of estimating experience in manufacturing, utilities, or related industrial sectors., • Strong understanding of civil, mechanical, and electrical systems and their cost drivers., • Proven ability to lead and develop technical estimating teams., • Skilled in interpreting blueprints, electrical/mechanical drawings, and commercial bid documents., • Excellent communication, analytical, and organizational skills., • Proficiency in Microsoft Office (Word, Excel, Outlook); experience with AutoCAD or SolidWorks a plus.

Job Description Responsibilities A Diesel Service Technician is responsible for providing service & repair to our customers' fleet via assigned truck and equipment repairs, while maintaining exceptional customer service. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Cleaning, maintenance, visual inspection, and removal of parts and attachments., • Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Develop and maintain positive relationships with customers to increase overall customer satisfaction. Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Valid driver license (CDL a plus!), • Peterbilt, International, Ford, Hino, Isuzu, Cummins, &/or ASE certifications are preferred & rewarded Total Rewards & Compensation: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Summary: A commercial mechanical contractor is seeking a Service Project Engineer to support MEP service and construction projects. This role is ideal for someone who is detail-oriented, organized, and capable of coordinating technical activities across engineering, purchasing, construction, fabrication, and field operations. You will assist Project Managers on complex mechanical projects while gaining experience in estimating, scheduling, design support, and project delivery. Key Responsibilities: * Support Project Managers with coordination between engineering, accounting, purchasing, fabrication, and field teams * Process RFIs, submittals, daily reports, procurement logs, and other project documents * Coordinate material procurement, delivery schedules, installation procedures, and subcontractor support * Assist with planning, scheduling, labor tracking, cost tracking, and project forecasting * Conduct job walks and help resolve installation or design challenges * Attend kickoff meetings, progress meetings, and OAC meetings * Maintain clear communication with clients, subcontractors, suppliers, and internal teams Qualifications: * Bachelor’s degree in Engineering, Construction Management, Mechanical Engineering, or related field, or 3–5 years of mechanical/MEP industry experience * Strong communication and organizational skills * Ability to support field teams and project management in a fast-paced environment * Professional demeanor and strong relationship-building abilities * High integrity and willingness to learn Compensation + Benefits: * Hourly rate based on experience * Medical, dental, and vision benefits * Paid vacation, holidays, and sick time * 401(k) plan * Development and long-term growth opportunities

Job Description Description: Direct Hire Role - Read Description Carefully Preferably applicants should have strong Manufacturing Engineer experience within an Elastomer organization (preferably) as well as Aerospace and ITAR experience. Knowledge of AS9100 a plus. Manufacturing Engineer 2 positions: Location: OMTC Location is located in Southern California (Rancho Cucamonga) These openings are replacements Must be US Citizen due to ITAR requirements Responsibilities: The Manufacturing Engineer works closely with the manufacturing team, supports the development, optimization, and sustainability of manufacturing processes related to elastomer materials and products. This role ensures efficient production, high product quality, and strong compliance with industry standards while working closely with cross-functional teams in engineering, quality, safety, and operations. Process Engineering & Optimization: Develop, implement, and optimize elastomer molding, extrusion, mixing, and curing processes (e.g., compression molding, injection molding, calendaring). Analyze production data to identify inefficiencies and lead continuous improvement initiatives using Lean, Six Sigma, and rootcause problemsolving tools. Create and maintain process documentation, including work instructions, SOPs, control plans, and PFMEAs. Manufacturing Support: Provide day-to-day technical support to production teams, troubleshooting process and equipment issues related to elastomer manufacturing. Define and validate process parameters for new and existing products to ensure stability, repeatability, and compliance with product specifications. Oversee tooling design, tooling trials, and qualification for elastomer components. Equipment & Technology: Specify, validate, and maintain elastomer processing equipment, including mixers, extruders, molding presses, curing ovens, and inspection tools. Lead or support capital equipment projects, including justification, procurement, installation, and validation. Identify and implement new technologies to improve elastomer flow, curing chemistry, throughput, and product consistency. Safety & Environmental: Support safety initiatives by identifying risks associated with high-temperature processes, chemical mixing, and press operations. Ensure compliance with environmental regulations related to elastomer materials and curing agents. For interviews we need the following details before applicant scheduled interviews for Denied party screening: Full name (as it appears in Passport or SSC) Confirmation of US Citizenship Country of birth

Job Description Overview National Award-Winning Studio & Winner of Design Firm of the Year is actively seeking Structural Project Engineers of all levels to join their Anaheim, Los Angeles, or Rancho Cucamonga office. With over 19 offices across the U.S., the award-winning architecture + engineering firm specializes in K-12 through college/university, healthcare, sports and corporate business sectors across the U.S. The company has won over 500 design awards and is recognized for shaping learning environments for students and the community. It's well established culture has also led the firm being named to the list of “Best Places to Work.” For over forty years, the multidisciplinary studio has created a client base of more than two-hundred clients, a list that includes university systems, hospital system, school districts, and Fortune 500 companies. The Structural Division The Structural Division specializes in comprehensive structural engineering planning and design services, including structural assessments and forensics investigations. Their engineers have extensive experience and knowledge of structural engineering services for education, commercial, religious, healthcare, sports & entertainment, hospitality, retail, and federal/government. They offer our employees a highly competitive salary and benefits package along with numerous opportunities to become involved in extra-curricular activities and organizations established through the firm. Essential Duties & Responsibilities The Project Engineer will operate independently while receiving direct guidance from the Engineer of Record, contributing to the coordination and design of diverse structural projects throughout both design and construction phases. This role presents an outstanding opportunity for professional growth and career advancement within our forward-thinking structural engineering firm. They provide a highly competitive salary and benefits package. Success in this position requires an attentive, client-oriented individual with a flair for creative problem-solving. * Actively engage in coordination meetings with diverse stakeholders, including other disciplines, clients, and owners, and contribute to design review meetings. * Efficiently coordinate the design process to produce comprehensive construction documents within the specified project schedule and budget. * Skillfully prepare structural specifications, select construction procedures, determine materials and member sizes, and conduct all necessary calculations essential for design. * Play a crucial role in shop drawing reviews, responding to RFI’s (requests for information), handling change proposal requests, and seamlessly incorporating changes into project documents. * Utilize strong written and verbal communication skills to effectively convey design and coordination elements to other members of the project team. * Conduct site observations and walks during construction, preparing detailed reports to ensure project alignment with design intent and specifications. Education and Work Experience Requirements * Hold a Bachelor’s degree in civil engineering with a Structural emphasis. * Bring a minimum of 6 years of full-time progressive experience in structural engineering. * Possess a Professional Engineering license (P.E.) is required. * Demonstrate a robust understanding of the California Building Code (CBC) and all relevant design codes such as ASCE, AISC, ACI, MSJC, NDS, etc. * Exhibit proficiency in widely-used structural engineering and office tools, including ETABS, SAFE, RISA, RAM, ENERCALC, Excel, Bluebeam, etc. * Showcase a high level of proficiency in performing complete gravity and lateral analyses using design software, along with preparing comprehensive structural engineering calculation packages. * Preferably have familiarity with educational projects and knowledge of DSA (California applicants only) requirements and processes. * Demonstrate expertise in the design of various structural materials, encompassing steel, concrete, masonry, wood, etc. * Exhibit proficiency in drafting and navigating Revit and AutoCAD, with a preference for experience in these platforms. * Possess excellent written and verbal communication skills. Additional Notes for California Applicants While the majority of their projects focus on K-12, their portfolio extends to encompass higher education, government buildings, sports facilities, fire stations, and modifications to existing structures. While expertise in educational projects and familiarity with the DSA process (California only applicants) are advantageous qualities in potential candidates, they also welcome individuals with a strong academic background and relevant experience in general building design in California. We look forward to receiving your application! Apply today to learn more.

Director of Estimating & Manufacturing Position Type: Direct Hire Position Location: Fontana, CA Position Salary: $150,000.00 - $200,000.00 Base + Bonus (Dependent on Experience) Responsibilities: • Lead the estimating teams and processes at a national level for the business., • Focused on growing the business, this role will be responsible in ensuring that the estimating procedures are developed and executed properly, maintaining a high bid success rate with a strong profit margin, and growing talent within the department., • Hires and trains the estimating department staff., • Oversees the workflow and schedules of the department., • Promotes collaboration between estimating staff, business development, marketing, and engineering teams., • Conducts performance evaluations that are timely and constructive., • Handles discipline and termination of employees in accordance with company policy., • Visit Canada & Texas Offices a minimum of (1) Week every (2) Months to review current projects and instill a culture for the engineering teams., • Establishes and institutes procedures for estimating team to adhere to both from a technical perspective and a financial perspective., • Manage relationships with external customers and business development manager to ensure cost effectiveness for the business and the customer., • Be responsible for watching technology trends and preparing cost reduction and other business recommendations based on those trends., • Work with other departments to refine product estimates to establish standards for all products with regards to both products and labor hours., • Perform final review of all estimates prior to sending to customer or the next layer for approval., • Review proposals from a holistic view-point to ensure customer confidence and competitiveness within the market segment., • Review terms and conditions at a high level for all estimates and approve based on limits of authority., • Develops strong relationship with clients to create depth in the relationship and serves as an expert on product capabilities., • Read and interpret documents to understand customer requirements, determine scope of work, and assess the company’s ability to bid the project., • Perform initial review of bid opportunities with team to confirm bid opportunity is a fit for the company and if alternate solutions can be suggested to the customer., • Promote creative ideas within department to position proposal to be highly accurate and attractive to the end customer., • Maintain accurate pricing for internal database in coordination with purchasing department., • Propose ideas and suggestions for areas of improvement to standardize bid process and reduce overall cycle time. Responsibilities: • Bachelors degree in Engineering, Construction Management, or related field., • 8+ years of experience in estimating preferably in the electric utility industry., • 8+ years of experience in a leadership capacity., • Strong supervisory and leadership skills., • Ability to read mechanical and electrical drawings, schematics, and diagrams, • Ability to read and understand Commercial Documents, • Excellent written and verbal communication skills, • Excellent organizational skills and attention to detail, • Able to multi-task, prioritize, and manage time efficiently, • Strong critical thinking skills and ability to make independent judgments, • Excellent interpersonal and customer service skills, • Proficient with Microsoft Office Suite (Word, Excel and Outlook) and other related programs (AutoCAD, Solidworks) Full Benefits: • Full Benefits (Medical, Dental, Vision), • 401K+ Matching, • Bonus, • PTO, • Life Insurance, • Tuition Reimbursement

What You’ll Do As a Senior Civil Engineer I/II, you will: • Develop project designs by evaluating project constraints, site conditions, project goals, agency requirements, and engineering best practices, • Support construction administration efforts, including RFIs, submittals, and construction changes, • Train and provide technical guidance to junior engineering staff, • Prepare technical reports and perform complex calculations related to hydrology, hydraulics, water quality, stormwater detention, and utility sizing, • Complete complex grading designs and earthwork calculations, • Bachelor’s degree (B.S.) in Civil Engineering or a related discipline from an accredited four-year institution, • 5–7 years of experience, depending on prior land development design experience, • At least 2 years of independently solving complex engineering problems in land development, • Proficiency in AutoCAD, Land Development Desktop (LDD), and/or Civil 3D, • Engineer-in-Training (EIT) certification, • A motivated, curious problem-solver who works well both independently and collaboratively

We are a full-service HVAC, building automation, chiller, and retrofit contractor with a reputation for combining high-quality consulting services with customized energy solutions.Our integrated, single-source solutions include turnkey in-house capabilities with design assistance, as well as enginee

Job DescriptionArchitect Architect - Single Family Luxury Please submit portfolio and resume for consideration. Position Overview We are seeking a talented and experienced Architect specializing in Single Family Luxury homes. The ideal candidate will be responsible for designing and overseeing the construction of high-end residential properties that reflect the client's vision and elevate the standard of living. This position requires a strong creative vision, attention to detail, and the ability to manage multiple projects effectively. Key Responsibilities • Develop architectural designs and plans for luxury single-family homes, • Collaborate with clients to understand their needs and preferences, • Oversee the design-build process from conceptualization to completion, • Ensure compliance with local zoning laws and building codes, • Select materials and finishes that align with the luxury aesthetic, • Coordinate with contractors, interior designers, and other professionals involved in the project, • Conduct site visits to monitor progress and ensure quality standards are met, • Bachelor's or Master's degree in Architecture, • Minimum of 5 years of experience in residential architecture, specifically in luxury design, • Strong portfolio showcasing high-end residential projects, • Proficiency in architectural design software (e.g., AutoCAD, Revit), • Excellent communication and interpersonal skills, • Ability to manage multiple projects and meet deadlines, • Strong understanding of design-build processes and remodeling techniques - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 01/06/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

ABBA Roller is seeking a Wheel Polisher - Level 1 to support manufacturing operations by polishing and finishing rubber and urethane wheels to meet customer specifications and quality standards. This is an entry-level manufacturing position, ideal for candidates with general machine experience, mechanical aptitude, or hands-on shop experience. Full training will be provided, with clear advancement opportunities. About ABBA: ABBA Roller specializes in high-performance urethane rollers and custom elastomer solutions for industrial and commercial applications. We support customers across diverse industries with precision-engineered products. Our culture emphasizes safety, teamwork, craftsmanship, and continuous improvement. Essential Duties & Responsibilities \n • Operate manual polishing and grinding lathes to finish rubber and urethane wheels\n, • Perform polishing operations to achieve required surface finish and appearance\n, • Load and unload wheels using proper tools and lifting methods\n, • Follow work instructions, travelers, and standard operating procedures\n, • Perform visual inspections and basic dimensional checks\n, • Maintain a clean, safe, and organized work area\n, • Communicate production or quality issues to supervision\n, • Support daily production goals and schedules\n, • Assist with basic equipment care and cleanliness\n, • Follow all safety and quality requirements\n, • High School diploma or GED required\n, • Entry-level to 1+ year manufacturing, machine, or shop experience preferred\n, • Attention to detail\n, • Good hand-eye coordination\n, • Ability to follow instructions and procedures\n, • Strong work ethic and reliability\n, • Ability to lift and manipulate up to 40 lbs\n\n, • Ability to stand and work on feet 8+ hours per shift\n\n This role provides a clear development path to Wheel Polisher Level 2, CNC Grinder, or other advanced manufacturing roles within ABBA Roller. Benefits: At ABBA Roller, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. ABBA Roller is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. Applicants requiring reasonable accommodation to complete the application process may contact Human Resources. This position requires access to information subject to the International Traffic in Arms Regulations (ITAR). Employment is contingent upon the applicant being a "U.S. person" as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws.

Job Details We are seeking a motivated and detail-oriented Structural Project Engineer with a Professional Engineer (PE) license to join our growing team. Coordinate with architects, MEP engineers, and contractors to ensure project accuracy and efficiency. Review and seal structural drawings and rep

Work Experience: 3+ years of engineering experience in the medical device industry, particularly in product development or quality engineering. Preferred Education: Bachelor's Degree in engineering, preferably electrical or mechanical. General Skills & Competencies: Experience in product, manufactur

Here, they learn theory and practical application of nuclear physics and reactor engineering.

ABOUT Nuclear technicians, power plant operators, and subsystems specialists are responsible for keeping vital Naval submarines and aircraft carriers running. These highly trained, hands-on professionals perform the complex technical functions that are at the core of sub and carrier capabilities. Their job involves everything from operating nuclear propulsion plant machinery to controlling auxiliary equipment that supports Naval reactors to maintaining various electronic, propulsion, and weapons systems. RESPONSIBILITIES There are three types of Nuclear Operations jobs for enlisted Sailors. Responsibilities depend on your training, interests, and designation. All three of these ratings are eligible to receive up to a $40,000 bonus for first-time enlistment and up to a $100,000 bonus for re-enlistment. Machinist's Mate Nuclear (MMN) Operate and maintain steam turbines and reduction gears used for nuclear ship propulsion and auxiliary machinery such as turbogenerators, pumps, and oil purifiers Maintain auxiliary machinery outside of main machinery spaces, such as electrohydraulic steering engines, elevators, refrigeration plants, air conditioning systems, and desalinization plants Operate and maintain compressed gas producing plants Perform duties in nuclear propulsion plants operating reactor control, propulsion, and power generation systems Electrician's Mate Nuclear (EMN) Responsible for the operation of a ship's electrical power generation systems, lighting systems, electrical equipment, and electrical appliances Install, operate, adjust, maintain, inspect, test, and repair electrical equipment Perform maintenance and repair of related electronic equipment Troubleshoot electric breakers and circuits aboard nuclear-powered ships like aircraft carriers and submarines Electronics Technician Nuclear (ETN) Operate and perform maintenance on the electronic systems that make the nuclear reactor on Navy ships run Calibrate nuclear control rods to generate power aboard submarines and aircraft carriers Be part of a watch team that enables the fission process, generating steam for propulsion WORK ENVIRONMENT As an Enlisted Sailor working in nuclear operations, you'll have the opportunity to work at sea or ashore. Your assignment could place you in an intense, fast-paced environment aboard a nuclear-powered submarine or aircraft carrier. TRAINING & ADVANCEMENT NAVY NUCLEAR FIELD (NF) PROGRAM Upon completion of initial 7–9 week Recruit Training (known as Boot Camp), those pursuing a Nuclear Operations role report to A School for technical training based on their specific job rating, followed by advanced nuclear training. A School for MMNs The three-month Machinist's Mate Nuclear (MMN) course in Charleston, SC provides basic knowledge of technical mathematics and the theory and operation of a steam power plant. Students learn to operate tools, test equipment and system components, read blueprints, practice rigging techniques, and perform maintenance procedures. From there, it's on to NNPS and NPTU (see below). A School for EMNs The six-month Electrician's Mate Nuclear (EMN) course in Charleston, SC provides basic knowledge of technical mathematics and power distribution. Students learn to solve equations using phasors, vector notations, and basic trigonometry, and analyze DC and AC circuits. They also learn how to operate electrical equipment, troubleshoot, maintain, and repair electrical circuits, motors, and related equipment. From there, it's on to NNPS and NPTU (see description below). A School for ETNs The six-month Electronics Technician Nuclear (ETN) course in Charleston, SC provides basic knowledge of technical mathematics and electricity, electronics, solid-state devices, digital logic, systems, microprocessors, and instrumentation/control circuits. Students learn how to interpret schematic diagrams and use test equipment to isolate and correct faults in electronic systems. From there, it's on to NNPS and NPTU (see description below). Naval Nuclear Power School (NNPS) Upon completion of A School training, MMNs, EMNs, and ETNs attend Naval Nuclear Power School (NNPS) in Charleston, SC. Here, they learn theory and practical application of nuclear physics and reactor engineering. The six-month course provides a comprehensive understanding of a pressurized-water Naval nuclear power plant, including reactor core principles, heat transfer and fluid systems, plant chemistry and materials, mechanical and electrical systems, and radiological control. Nuclear Power Training Unit (NPTU) Following NNPS, MMNs, EMNs, and ETNs begin prototype training in their rating specialty at one of two Nuclear Power Training Units (NPTUs) – located in Charleston, SC and Ballston Spa, NY. This six-month course teaches the fundamentals of a Naval nuclear power plant and the interrelationship of its mechanical, electrical, and reactor subsystems. Students develop oral communication skills, gain understanding of nuclear radiation, and acquire knowledge of safe operation of a complex Naval nuclear power plant. For all nuclear power trained ratings, promotion opportunities are regularly available but are competitive and based on performance. Specialized training and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields. EDUCATION OPPORTUNITIES Beyond offering access to professional credentials and certifications, Navy technical and operational training in nuclear operations can translate to up to 77 credit hours toward a bachelor's or associate degree through the American Council on Education. You may also continue your education through opportunities like the following: Navy College Program and Tuition Assistance Post-9/11 GI Bill QUALIFICATIONS & REQUIREMENTS A high-school diploma or equivalent is required to become an Enlisted Sailor in the nuclear operations field in the Navy. Those seeking one of these positions must be U.S. citizens with successful completion of one year of Algebra and meet eligibility requirements for a security clearance. General qualifications may vary depending on whether you're currently serving, have served before, or have never served before.

ABOUT Nuclear technicians, power plant operators, and subsystems specialists are responsible for keeping vital Naval submarines and aircraft carriers running. These highly trained, hands-on professionals perform the complex technical functions that are at the core of sub and carrier capabilities. Their job involves everything from operating nuclear propulsion plant machinery to controlling auxiliary equipment that supports Naval reactors to maintaining various electronic, propulsion, and weapons systems. RESPONSIBILITIES There are three types of Nuclear Operations jobs for enlisted Sailors. Responsibilities depend on your training, interests, and designation. All three of these ratings are eligible to receive up to a $40,000 bonus for first-time enlistment and up to a $100,000 bonus for re-enlistment. Machinist's Mate Nuclear (MMN) Operate and maintain steam turbines and reduction gears used for nuclear ship propulsion and auxiliary machinery such as turbogenerators, pumps, and oil purifiers Maintain auxiliary machinery outside of main machinery spaces, such as electrohydraulic steering engines, elevators, refrigeration plants, air conditioning systems, and desalinization plants Operate and maintain compressed gas producing plants Perform duties in nuclear propulsion plants operating reactor control, propulsion, and power generation systems Electrician's Mate Nuclear (EMN) Responsible for the operation of a ship's electrical power generation systems, lighting systems, electrical equipment, and electrical appliances Install, operate, adjust, maintain, inspect, test, and repair electrical equipment Perform maintenance and repair of related electronic equipment Troubleshoot electric breakers and circuits aboard nuclear-powered ships like aircraft carriers and submarines Electronics Technician Nuclear (ETN) Operate and perform maintenance on the electronic systems that make the nuclear reactor on Navy ships run Calibrate nuclear control rods to generate power aboard submarines and aircraft carriers Be part of a watch team that enables the fission process, generating steam for propulsion WORK ENVIRONMENT As an Enlisted Sailor working in nuclear operations, you'll have the opportunity to work at sea or ashore. Your assignment could place you in an intense, fast-paced environment aboard a nuclear-powered submarine or aircraft carrier. TRAINING & ADVANCEMENT NAVY NUCLEAR FIELD (NF) PROGRAM Upon completion of initial 7–9 week Recruit Training (known as Boot Camp), those pursuing a Nuclear Operations role report to A School for technical training based on their specific job rating, followed by advanced nuclear training. A School for MMNs The three-month Machinist's Mate Nuclear (MMN) course in Charleston, SC provides basic knowledge of technical mathematics and the theory and operation of a steam power plant. Students learn to operate tools, test equipment and system components, read blueprints, practice rigging techniques, and perform maintenance procedures. From there, it's on to NNPS and NPTU (see below). A School for EMNs The six-month Electrician's Mate Nuclear (EMN) course in Charleston, SC provides basic knowledge of technical mathematics and power distribution. Students learn to solve equations using phasors, vector notations, and basic trigonometry, and analyze DC and AC circuits. They also learn how to operate electrical equipment, troubleshoot, maintain, and repair electrical circuits, motors, and related equipment. From there, it's on to NNPS and NPTU (see description below). A School for ETNs The six-month Electronics Technician Nuclear (ETN) course in Charleston, SC provides basic knowledge of technical mathematics and electricity, electronics, solid-state devices, digital logic, systems, microprocessors, and instrumentation/control circuits. Students learn how to interpret schematic diagrams and use test equipment to isolate and correct faults in electronic systems. From there, it's on to NNPS and NPTU (see description below). Naval Nuclear Power School (NNPS) Upon completion of A School training, MMNs, EMNs, and ETNs attend Naval Nuclear Power School (NNPS) in Charleston, SC. Here, they learn theory and practical application of nuclear physics and reactor engineering. The six-month course provides a comprehensive understanding of a pressurized-water Naval nuclear power plant, including reactor core principles, heat transfer and fluid systems, plant chemistry and materials, mechanical and electrical systems, and radiological control. Nuclear Power Training Unit (NPTU) Following NNPS, MMNs, EMNs, and ETNs begin prototype training in their rating specialty at one of two Nuclear Power Training Units (NPTUs) – located in Charleston, SC and Ballston Spa, NY. This six-month course teaches the fundamentals of a Naval nuclear power plant and the interrelationship of its mechanical, electrical, and reactor subsystems. Students develop oral communication skills, gain understanding of nuclear radiation, and acquire knowledge of safe operation of a complex Naval nuclear power plant. For all nuclear power trained ratings, promotion opportunities are regularly available but are competitive and based on performance. Specialized training and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields. EDUCATION OPPORTUNITIES Beyond offering access to professional credentials and certifications, Navy technical and operational training in nuclear operations can translate to up to 77 credit hours toward a bachelor's or associate degree through the American Council on Education. You may also continue your education through opportunities like the following: Navy College Program and Tuition Assistance Post-9/11 GI Bill QUALIFICATIONS & REQUIREMENTS A high-school diploma or equivalent is required to become an Enlisted Sailor in the nuclear operations field in the Navy. Those seeking one of these positions must be U.S. citizens with successful completion of one year of Algebra and meet eligibility requirements for a security clearance. General qualifications may vary depending on whether you're currently serving, have served before, or have never served before.

Quality Engineer - Automotive Stamping.We are actively searching for a experienced Quality Engineer to join our team with an.Automotive and Consumer Products Company, in a key leadership position.MUST HAVE AUTOMOTIVE EXPERIENCE - QUALITY - PPAP - APQP - ROOT CAUSE ANALYSIS - 8D - 5-Why - ISO 9001/20

Train and provide technical guidance to junior engineering staff. Deliver high-quality engineering work products, including full QA/QC reviews and completeness checks, for internal and external stakeholders. Civil Engineering or a related discipline from an accredited four-year institution.

Bachelor’s degree in Industrial or Mechanical Engineering with a minimum of 2 - years of experience in a food processing environment. The Quality Process Engineer will be responsible for ensuring that operational processes are stable and capable of the consistent delivery of quality food products

Job DescriptionAs a Production Engineer you will prepare, assemble, inspect, and test products and equipment before they’re marketed and sold to customers. This role is pivotal in providing technical support, service, preparations, and maintenance for our range of equipment, accessories, and consumables. Your experience in troubleshooting, preparing, repairing, and installing machinery will be vital in ensuring optimal performance and customer satisfaction. Additionally, you will collaborate with other departments for product demos, testing, and implementing new changes, ensuring an all-encompassing approach to customer support. We are looking for a self-driven, enthusiastic individual with a desire to learn. Responsibilities: • Prep, troubleshoot, repair, install, and adjust industrial machinery, • Read and interpret drawings, blueprints, schematics, and electrical code specifications to determine layout of industrial electrical equipment installations, • Prepare machines and equipment for shipment, • Inspect, test, and prepare finished products prior to delivery to customers, • Pick parts for placement on machines, • Sample testing, • Troubleshoot, calibrate, monitor, repair, and maintain inverters, controllers, relays, and industrial sensors, etc., • Configuration programming of machine controllers, • Fabrication of parts per specifications given by the engineering team, • Install, examine, and replace or repair electrical wiring, receptacles, switch boxes, and other electrical components, • Prep and/or program machinery, equipment, tape heads, etc. encompassing all product lines., • Configure machines using HMI and PLC., • Read and interpret air and electrical schematics and implement changes., • Troubleshoot and diagnose technical issues., • Perform repair and maintenance tasks, ensuring machines operate at peak efficiency., • General warehouse tasks, including forklifting, parts and tape picking and prep, as necessary., • Keep work area and warehouse clean, tidy, and aligned with safety standards and requirements., • Collaborate and communicate with QA and Engineering teams frequently., • Accurately prepare equipment to instructions and/or documents provided by Engineering., • Generate comprehensive reports on technical issues, resolutions, and changes., • Implement production process improvements., • Propose innovative solutions for technical issues and contribute to continuous improvement initiatives., • Test and implement new changes on machines with different consumable materials, ensuring product compatibility and operational efficiency., • Collaborate with product development teams to ensure seamless integration of new materials into existing machines., • High quality fabrication., • Adhering to best safety and technical practices., • Performs other duties as assigned.Education, Skills & Experience:, • 2+ years experience in machinery preparation or other related fields, • Forklifting experience, • Basic Electrical Skills (read schematics, parts replacement, wire organization), • Familiarity with industrial tools and equipment (mill, lathe, plasma cutter, MIG welder, stick welder), • Familiarity with ladder logic, PLC, and/or Allen Bradley controls, • Familiar with basic part fabrication, • Ability to work under pressure with strict deadlines and adapt to changing work schedules, • Ability to handle physical workload, • Clean driving record, • Ability to lift up to 75 pounds

Job Description We are a group of Electrical Engineers and System Integrators that specialize in the design and implementation of industrial control systems. We are unique from a standard software engineering job in that you will be working on real life processes that monitor and control industrial systems. This includes time outside the office on-site assisting in start-ups and bringing these systems to life. We are seeking a Programmer and an Electrical Engineer to become an integral part of our team! We work in a unique and exciting industry that makes impacts on the physical world through automation. These position(s) require good communication skills and ability to work without constant oversight. Qualifications • Education: BS in Electrical Engineering, Computer Engineering, or Computer Science preferred. Relevant experience or other associates or degrees considered., • Electrical Engineer Experience: Previous experience in Electrical Engineering, motor controls, control schematics, lighting design, network design, specifications and backup power generation. Knowledge of NFPA 70 and NFPA 820. 4-year degree in Electrical Engineering required. PE not required but encouraged. Candidate should be willing to pursue PE license., • Interpersonal Skills: Strong communication skills (e.g., negotiation, listening, cooperation, tact, diplomacy) to build strong relationships. Capable of working efficiently with clients, contractors, regulatory agencies, and internal staff., • Strong problem solving and critical thinking skills. Strong attention to detail., • Strong written and verbal communication skills. Ability to communicate effectively with all levels of staff., • Quantitative skills (e.g., analytical, technical, problem solving), • Proficiency with Microsoft Office, • Attitude: Must have a positive, can-do attitude that embraces challenges and opportunities, • Excellent salary, benefits, and perks. 401K, Medical, Life Insurance, and Profit Sharing. We offer dental, vision, and other supplemental insurance plans that you may elect to participate in., • Job security and growth potential. Highly reputable 34-yr medium-sized firm. SKM commits to investing heavily in our most important asset - our people. Together, we are stronger and more innovative., • Flexible work schedule and location. Whether you’re working from the SKM office, remote location or at a client site, you will be working in an environment where your integrity and innovative mindset is supported., • Collaboration with and Mentorship by Firm Principals. SKM has a great working environment and company culture. We have a very supportive and open environment which gives you the opportunity to take your career to any level you desire., • Immediate responsibility and opportunity to contribute. Innovative, exciting, and challenging projects that make a significant environmental and social impact. If you feel you are a good fit for this position and are interested in joining the SKM Team, please submit a cover letter and current resume including salary history and references. Company DescriptionWe believe in professional integrity, engineering excellence, technical innovation, open communication, and mutual respect. We take pride in providing high quality professional electrical, instrumentation and control services on projects while maintaining client satisfaction.We believe in professional integrity, engineering excellence, technical innovation, open communication, and mutual respect. We take pride in providing high quality professional electrical, instrumentation and control services on projects while maintaining client satisfaction.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Dental insurance, • Flexible schedule, • Free food & snacks, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Mechanical Design, • Design mechanical components, assemblies, frames, mechanisms, pneumatic/hydraulic systems as required., • Generate detailed drawings, 3D models (e.g. SolidWorks, Inventor, etc.), select materials, finishes, and manufacturing methods., • Perform mechanical stress/thermal/kinematic analyses as needed., • Controls / Automation Design, • Specify, design, program, configure, test, and commission control systems (PLCs, HMIs, sensors, actuators, drives, etc.)., • Develop control logic, interlocks, safety features., • Integrate mechanical components with control systems (e.g. feedback loops, motion control)., • Installation, Commissioning & Testing, • Oversee or perform machine build, wiring, panel design and assembly, installation on-site., • Conduct machine start-ups, commissioning, debug mechanical and control issues., • Test machines for performance, safety, compliance; debug and optimize., • Maintenance, Troubleshooting & Improvement, • Diagnose mechanical and control-related problems in production equipment., • Work with maintenance teams to reduce downtime, improve reliability., • Lead continuous improvement projects (e.g. reduce cycle time, energy usage, improve quality)., • Documentation & Compliance, • Create and maintain documentation: mechanical drawings, control schematics, electrical wiring diagrams, user manuals, programming documentation., • Ensure designs meet relevant safety, electrical, mechanical codes and standards., • Support regulatory compliance and risk assessments (e.g. guarding, emergency stops, interlocks)., • Collaboration & Project Management, • Work with project managers to estimate costs, schedule work, define deliverables., • Coordinate with vendors for components (electrical, mechanical) and evaluate vendor offerings., • Communicate with other engineering disciplines (electrical, software), production, quality, and maintenance.Qualifications, • Education: Bachelors degree in Mechanical Engineering, Mechatronics, Controls/Automation, Electrical Engineering, or equivalent., • Experience: Typically 3-7 years of experience in mechanical design + control systems, ideally in manufacturing or packaging machinery., • Technical Skills:, • Proficiency in CAD (SolidWorks, AutoCAD, etc.) for mechanical design., • Strong PLC programming and debugging experience (e.g. Allen-Bradley, Siemens, etc.)., • Understanding of motion control, sensors, drives/VFDs., • Ability to read and interpret electrical schematics, mechanical drawings., • Knowledge of safety standards (e.g. OSHA, NFPA, relevant local & industry standards)., • Desired Skills & Attributes:, • Strong problemsolving skills and attention to detail., • Good communication skills, able to work crossdepartmentally., • Ability to manage multiple projects, meet deadlines., • Practical, handson mindset; comfortable working both at desk (design) and shop/field (commissioning, troubleshooting)., • Optional / Nice to Have:, • Experience with robotics, vision systems., • Familiarity with SCADA / networked control systems., • Experience with predictive maintenance, data analytics.Working Conditions & Other Info, • May require travel to customer / installation sites., • On-site work in production / machinery shop, occasionally lifting/moving heavy components, climbing, working at heights or in confined spaces as required., • Standard hours, but possible overtime for project deadlines or emergency repairs.Performance Metrics / KPIs, • Machine uptime / reliability improvements., • Successful completion of design & control projects on time and within budget., • Reduction in mechanical or control failures / breakdowns., • Improvements in cycle time, throughput, efficiency., • Safety compliance, incident rates related to design & controls.

Job Description Renogy aims to become a global leader of independent clean energy solution. We are seeking and empowering talents to build a team of world-class product innovation and development by fully leveraging clean energy ecosystem to better engage with customers to drive clean energy love and product innovation. From small power banks to complete solar kits, we pride ourselves on supplying top-of-the-line off-grid solar equipment. Position Overview: As a Product Application Engineer for Energy Storage Systems, you will play a critical role in supporting the development, application, and integration of energy storage solutions for various applications. Your responsibilities will include working closely with customers, internal teams, and partners to ensure the successful deployment and performance of energy storage products. Duties and Responsibilities: This position will be responsible for leading a variety of projects and day-to-day company operations including, but not limited to: • Collaborate with customers to understand their energy storage needs and provide technical guidance and support., • Offer expertise in selecting the appropriate energy storage solutions based on customer requirements., • Assist customers with technical issues, troubleshooting, and problem resolution., • Conduct product testing and validation to ensure optimal performance., • Conduct training sessions for customers and partners on the installation, operation, and maintenance of energy storage systems., • Product introduction and training for sales, marketing, tech support and RMA., • Create and maintain technical documentation, including application notes, user manuals, and installation guides., • Educate customers and internal teams on product features and best practices., • Work with the product development team to integrate energy storage solutions into various applications., • Define desired functionality and features for new product development., • Provide input and feedback to improve product design and performance., • Stay updated on industry regulations and standards related to energy storage and ensure products meet these requirements., • Manage and oversee energy storage system projects from inception to completion., • Bachelor's degree in Electrical Engineering, or equivalent experience in a relevant field., • Experience in product development, product management, testing or technical support in related fields is a plus., • Preferred knowledge and familiarity with the areas of Energy Storage Systems, Batteries, Inverters, battery chargers, IoT., • Self-motivated, confident, energetic, and not afraid to take risks., • Possesses strong presentation skills, both oral and written., • Demonstrated ability to work in a team environment to achieve business objectives., • Strong analytical and project management skills with an ability to develop effective solutions and manage projects through completion., • Familiarity with industry standards and regulations related to energy storage., • Will sit, stand, or walk short distances for up to the entire duration of a shift, • Will climb stairs on an occasional basis, • Will lift, push, or pull up to 40 pounds on an occasional basis, • Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis, • Must be able to comply with all safety standards and procedures, • May reach above shoulder heights and below the waist on a frequent basis, • May stoop, kneel, or bend, on an occasional basis, • Ability to wear personal protective equipment is required (including but not limited to, steel toed shoes, gloves, safety glasses, hearing protection, protective jacket or apron and arm guards) Other: • Other duties as assigned

Job Description ABBA Roller is seeking a QA Engineer 3 who will support various aspects of ABBA’s Quality Management System, ensuring world-class systems and performance through a continual focus on process improvement, supplier development, and customer interaction. Support a culture of Continuous Improvement and positive Customer Experiences. Substantial knowledge of the ISO9001-2015 quality management system and formal problem-solving tools such as 8D and Ishikawa is required. About ABBA Roller: ABBA Roller has been a world-leading provider of Rubber/Polyurethane for rotary components in the industrial markets. Our team designs, manufactures, reconditions, Rubber & Chrome Rollers. ABBA Roller provides unparalleled and creative solutions to critical and complex problems. Essential Duties and Responsibilities: • Quality engineering responsibility for Rubber and Urethane processes, • Quality Champion and change agent for assigned areas of responsibility, • Implement and maintain the Cost of Quality system, • Work closely with Engineering to ensure that designs can be manufactured with repeatable Quality, • Plan and perform internal quality audits and execute action items, • Lead Quality initiatives and develop and facilitate Quality teams, • Provide Quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs, and satisfaction, • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues, • Drive key Quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, and Contract Review., • Formulate and maintain quality assurance/control objectives complementary to organization policies and goals, and training requirements., • Create and implement inspection criteria and procedures., • Design and implement quality control training programs to key personnel in conjunction with managers., • All other duties and tasks as required. EDUCATION AND/OR EXPERIENCE REQUIRED: • Bachelor’s Degree required, Engineering discipline preferred, • 5+ years working experience in a manufacturing regulated environment, • Previous experience in a high-mix, low volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2008 and AS9100D Quality Management System processes. Skill Requirements: • Detailed knowledge of manufacturing requirements and specifications, • Proven track record of partnering with manufacturing via applying Engineering and Quality expertise to improve quality, reduce cost, improve lead time, and drive efficiencies, • Experience or past history with root cause analysis and corrective action, • Knowledge of auditing ISO 9001:2015 Quality standards, • Experience with formal quality and operations systems, • Familiar with Kaizen, 6S, Six Sigma, Continuous Improvement, and Lean Production, • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Proficient in the use of digital/analog measuring instruments, e.g., micrometers, calipers, linear and dial gauges, height gauges, and a visual comparator, • Skilled at performing First Article inspections, • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook, • An understanding of the use and application of SPC Benefits: At ABBA Roller, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. ABBA Roller is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. Applicants requiring reasonable accommodation to complete the application process may contact Human Resources. This position requires access to information subject to the International Traffic in Arms Regulations (ITAR). Employment is contingent upon the applicant being a “U.S. person” as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws.

Job Description The Process Engineer is responsible for developing, scaling, and optimizing manufacturing processes from research and development (R&D) input to full-scale production. This role serves as a key liaison between R&D, Planning, Manufacturing, Quality, and customers to ensure smooth transitions from laboratory formulations to commercial production. The Process Engineer troubleshoots problematic formulations, identifies areas for process improvements, and ensures compliance with safety, quality, and regulatory standards. Responsibilities • Interface with customers and/or R&D on laboratory processes., • Develop manufacturing processes from R&D laboratory input and/or direct observation of lab batches., • Work with Planning to determine appropriate manufacturing tanks and equipment for smooth transition to production., • Observe pilot batches and first full production batches to verify procedures and ensure scalability., • Collaborate with customers or development laboratories during pilot runs and scale-up to full-size batches., • Assist with troubleshooting problematic formulations to ensure production success., • Work with Manufacturing teams on continuous improvement of manufacturing processes., • Partner with Quality Assurance to develop improved testing parameters for formulations., • Support Production in establishing filling parameters for select formulas., • Ensure all processes comply with company SOPs, cGMP, and safety requirements., • Perform other duties as assigned. Required Skills and Abilities • Strong technical knowledge of process engineering in a manufacturing or R&D environment., • Ability to analyze and scale processes from laboratory to production effectively., • Excellent troubleshooting and problem-solving skills., • Strong communication skills, with the ability to interface effectively with internal teams and customers., • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint) and relevant manufacturing systems/software., • Exceptional organizational skills and attention to detail., • Ability to work effectively under pressure and meet deadlines in a fast-paced environment. Education and Experience Requirements • Bachelor’s degree in Chemical Engineering, Process Engineering, Industrial Engineering, or a related field required., • 3–5 years of experience in process engineering, preferably in the pharmaceutical, cosmetic, or manufacturing industries., • Experience with process scale-up, troubleshooting, and continuous improvement initiatives required., • Knowledge of cGMP, FDA regulations, and manufacturing documentation practices preferred. Physical Demands • Prolonged periods of sitting at a desk and working on a computer., • Ability to stand, walk, and observe production processes for extended periods of time., • Must be able to occasionally lift up to 25 pounds., • Ability to wear required PPE and work in production and laboratory environments. Working Conditions • Work is performed in both office and manufacturing floor environments., • Exposure to chemicals, machinery, and production equipment may occur., • May require extended hours, weekend work, or travel to support production needs., • On-Site, Full Time employment., • Pay is determined based on experience. Equal Employment Opportunity (EEO) Statement Universal Packaging Systems, Inc. DBA PakLab is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, creed, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity, gender expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital status, military or veteran status, or any other characteristic protected by applicable federal, state, or local law. Company DescriptionPakLab is a leading contract manufacturer specializing in health & beauty and household products. With three decades of professional product development service experience, we are setting a new standard in contract manufacturing. With our innate understanding of product design, development and formulation, as well as manufacturing and packaging mechanics, we work with our clients as a fully integrated strategic partner, creating innovative products from the bottom up.

Job DescriptionDescription: At Gentex Corporation, we’ve created an environment where great ideas and great people can thrive. Leveraging a history that spans over 130 years, Gentex is a global leader in personal protection and situational awareness solutions for defense forces, emergency responders, and industrial personnel operating in high performance environments. Join our multinational team of exceptional and dedicated employees around the world and work on challenging and rewarding projects, grow your skills, and advance your career all while making a positive difference in the lives of our customers. Together, you and Gentex can build a career that’s uniquely yours. MINIMUM QUALIFICATIONS EDUCATION: A four-year degree in the engineering field, preferably in the Mechanical, Aerospace or related discipline. M.S. degree in a technical field is a plus. EXPERIENCE: The ideal candidate is a results-oriented leader who will empower the engineering team to foster innovation and successfully deliver on project, program, organizational, and company goals Gentex offers a robust benefit package- including, but not limited to, medical coverages, 401k, paid time off and excellent work schedules including a 9/80 work week. Requirements: Must be able to perform the following: • Excellent problem solving, critical thinking and planning skills, • Excellent interpersonal and oral/written communication skills, • Ability to manage and arbitrate conflicts, and promote teamwork and collaboration, • Ability to motivate employees through interpersonal interactions rather than solely on incentives, • Ability to understand/interpret technical related documentation, • Ability to introduce and adapt to change, • Ability to understand/interpret and generate technical related documentation, • Government acquisition process knowledge is desired, • Experience with military product development programs is desired, • Strategic thinking, • Adaptability, • Results driven approach, • Experience with ISO 9001 / AS9100D processes, • Proficient in MS Office RESPONSIBILITIES Technical: • Develop and execute technical, budgetary and staffing plans to support programs, projects and production activities, • Establish priorities, conduct critical reviews and provide technical direction as necessary, • Collaborate with internal and external customers to define project/program requirements, scope, schedule and objectives, • Enhance and refine product development processes to ensure programs are executed on time, within budget, and achieve optimal performance outcomes, • Support Business Group requests to address customer issues, inquiries, and efforts to pursue opportunities, • Generate and execute plans to meet department, program and project financial objectives, • Establish and track metrics to meet department level financial objectives, • Establish and track metrics to assess project/program, organization and employee performance, and implement corrective actions as required, • Conduct critical review of plans, processes and results, and provide direction that ensures compliance with policies, procedures and objectives, • Identify and implement process and procedure improvements, • Conduct periodic staff meetings to communicate status, priorities and general information, • Ensure compliance with SOPs, QEPs, CSPs, HR and Health & Safety policies, • Generate and maintain employee development and training plans, • Determine and evaluate skill set capability and needs, and address deficiencies, • Provide real time coaching and counseling, and conduct annual appraisals, • Conduct training, and recommend promotions, wage increases and discipline as required, • Schedule flexibility to support critical deadlines may be required. SUPERVISION: Yes TRAVEL: Yes TO APPLY: Visit: LOCATION: Gentex’s Rancho Cucamonga facility is in Rancho Cucamonga, CA is a city of about 177,000 residents located just south of the foothills of the San Gabriel Mountains and Angeles National Forest in San Bernardino County, California, United States. About 37 miles east of Downtown Los Angeles, Rancho Cucamonga is the 19th most populous city in southern California and the 27th state-wide. The city's seal, which centers on a cluster of grapes, alludes to the city's agricultural history including winemaking. Also, the Ontario Reign Hockey and Quakers Baseball teams are located 20 minutes from the Rancho Cucamonga location. Gentex Corporation is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard for any applicable state or federal protected class. Gentex is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required. Compensation details: 145000-165000 Yearly Salary PI19a2bcdde836-25405-39387469

Job Description We have an immediate opportunity for Senior Civil Structural Engineer for the Los Angeles area. This position requires management and development of new projects once all data and information are collected. The ideal candidate will play an active role in research and design and will require strategic decision-making process for new projects. This is a hybrid position with two days in the office. Job Duties and Responsibilities • Responsible for managing and developing new projects once data is received., • Ability to lead a team performing structural and line design analysis using PLS-CADD, PLS-Pole, and PLS-Caisson, • Perform as the go-to-expert for modeling and analysis across transmission and distribution, • Oversee QA/QC processing adhering to company safety standards, • Review and design pole foundations, • Provide expert guidance on new installation and the ability to evaluate existing structures, • Responsible for supporting construction activities coordinating with the field teams and the inspectors on various issues which include emergency restoration efforts due to wildfires, storms and other incidents, • Proven leadership, mentorship, guidance, and instruction to the transmission engineering team Education and Experience • Bachelor’s or Master’s degree in Civil or Structural engineering, • California Civil PE license desired not required, • Seven plus years’ experience of technical experience in Transmission and/or Distribution Engineering, • Engineering experience with Electric Utility Distribution and Transmission Systems using G095, NESC, and ASCE codes and guidelines with PLS-CADD, PLS-Pole, AutoCAD with desired skillset in PLS-Caisson, and SPIDAcalc Upon a conditional job offer, a drug test and background check will be required. Compensation based on experience. (Civil, PE, Electrical Engineer, PLS-Caisson, SPIDAcalc, PLS-CADD, G095, NESC) Company DescriptionAbout us: 347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website us:\r\n\r\n347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website .

Job Description PROJECT ENGINEER: In this position, you will have the opportunity to learn the fundamentals of construction project management and the technical details of ground improvement, shoring, and foundation drilling while assisting in job site management. Activities include preliminary design, estimating, layout, data acquisition, scheduling, and quality control. If you are ready to put your engineering skills to work in the field for 3 to 5 years while progressively assuming project management responsibilities, we are currently looking for individuals who recognize the importance of field experience, understand soil mechanics, have the ability to listen, have a desire to learn, can interact and communicate with field personnel, enjoy the competitive nature of contracting, enjoy working outside in all types of weather, open to extensive travel, want hands-on experience in the geotechnical construction industry, and seek an opportunity to make things happen. REQUIREMENTS: • Assertive, Competitive, and Tenacious., • BS Degree in Civil Engineering or Construction Management, • Critical Thinking Skills., • Written Communication., • Speaking and Interpersonal Communication., • Goal and Schedule Driven., • Ability to Adapt to Changing Environments. Pay Range - $75k-$85k. Compensation DOE. Powered by JazzHR pZPdQfbUAZ

Job Description Join Silverado Contractors as a 2026 Summer Project Engineer and take your first step into the exciting world of construction engineering! This opportunity will allow you to work directly with seasoned professionals in the San Francisco Bay Area, providing valuable hands-on experience in various project management aspects. As a Summer Project Engineer, you will be an integral part of the project team, assisting with the execution of projects from inception to completion. You'll engage in essential activities such as project planning, estimating, and ensuring adherence to safety and quality standards. Interns will have the opportunity to work on live projects, contributing to the successful delivery of services while gaining practical skills in the construction industry. Key Responsibilities • Assist in project planning and scheduling, ensuring project milestones are met., • Support Project Managers in coordinating project activities, resources, and information., • Help to review drawings and specifications to prepare relevant submittals., • Conduct site visits to monitor progress and quality, reporting on any potential issues., • Collaborate with various stakeholders, including subcontractors and suppliers., • Assist with budget tracking and cost management throughout the project lifecycle., • Participate in safety meetings and enforce safety compliance on-site. Internship commitment 8-10 weeks. Currently enrolled in a Bachelor's degree program in Civil Engineering, Construction Management, or a related field. Strong proficiency in Microsoft Office Suite (Excel, Word, PowerPoint). Excellent verbal and written communication skills. Ability to work collaboratively in a team-oriented environment. Strong analytical and problem-solving skills. Prior internship or co-op experience in construction or engineering is a plus, but not required. Benefits • Paid Time Off (Vacation, Sick & Public Holidays), • Training & Development, • Laptop

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Flexible schedule, • Free food & snacks, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development We are seeking a motivated and detail-oriented Electrical Engineer to join our automation team. This role is critical in the design, development, and support of electrical systems for automated packaging equipment. The ideal candidate will have strong technical knowledge, hands-on experience, and the ability to work collaboratively across departments. Key Responsibilities: Research, Design & Development • Design and develop electrical schematics and control systems for new and existing automation equipment., • Apply standardized electrical requirements (e.g., OSHA, UL 489, CSA) to ensure existing systems are compliant, and generate corresponding engineering work orders., • Specify and integrate electrical components such as PLCs, HMIs, sensors, and motion control systems., • Perform electrical load calculations and analyze power consumption.Installation, Commissioning & Training, • Support equipment installation, startup, and commissioning at customer sites., • Conduct system testing and troubleshooting to ensure functionality and compliance., • Develop training materials and lead training sessions for operators and maintenance teams.Project Management, • Plan and manage electrical engineering projects, including scheduling, programming, and coordination with internal teams and external partners., • Maintain accurate documentation, including wiring schematics, BOMs, and control software files.Technical Support & Troubleshooting, • Provide ongoing technical support for manufacturing, field service teams, and end users., • Troubleshoot and diagnose PLC, HMI, and motion control system issues to ensure optimal machine performance.Continuous Improvement, • Recommend and implement improvements to existing systems to enhance reliability, efficiency, and safety., • Stay current with technological advancements in industrial automation and electrical engineering best practices.Required Qualifications & Skills:, • Bachelors degree in Electrical Engineering or related field., • Proficiency in electrical circuit design and analysis, • Experience with CAD tools for electrical design., • Advanced programming experience (PLC & HMI)., • Familiarity with NEMA standards and industrial wiring practices., • Knowledge of UL489 & CSA electrical requirements is a plus.

Job DescriptionCivil Project Engineer – Land DevelopmentCompany: SITETECH Inc. About UsSITETECH Inc. is a civil engineering, land surveying, and land development consulting firm with over 35 years of experience. We specialize in delivering innovative solutions tailored to our clients' needs, from tentative planning to final engineering. Our collaborative and dynamic work environment fosters creativity, professional growth, and efficiency in tackling diverse projects. Position OverviewWe are seeking a skilled Civil Project Engineer with expertise in land development to join our team. The ideal candidate will have a strong background in civil engineering principles and experience managing land development projects from conception to completion. This position offers a casual work environment, flexible hours, and occasional remote work opportunities. Responsibilities • Design and develop land development projects, including site layout, grading, drainage, utilities, and roadway design., • Perform feasibility studies, site investigations, and environmental assessments., • Prepare engineering plans, specifications, and cost estimates., • Conduct hydraulic calculations and design stormwater management systems., • Coordinate with clients, regulatory agencies, and stakeholders to ensure project compliance and success., • Manage project schedules, budgets, and resources effectively., • Offer creative and efficient solutions to engineering challenges.Qualifications, • Proficiency in AutoCAD Civil 3D and related design software., • Experience in land development projects., • Strong written and verbal communication skills., • Excellent organizational and time management skills., • Ability to work both independently and collaboratively in a team environment., • Competitive salary commensurate with experience., • Comprehensive benefits package, including health insurance, retirement plans, and paid time off.

Job Description Overall responsible to develop and implement stable molding processes and controls to assure consistency on parts and meet quality standards. Maximize process efficiencies and support the Plastics manufacturing activity as well as various secondary processes. Perform mold validations. Investigate and resolve work-in-process problems. Contact suppliers in the process of correcting equipment problems. Support the Engineer, Production and Program manager team. Be self-motivated and implement a Teamwork environment. Essential Job Functions and Responsibilities: • Develop, design and setup robust molding processes utilizing scientific and decoupled molding, by running SMPD, DOEs, OQs, and PQs run., • Create documentation of molding set-ups, processes, and workflows., • Quantify current process capabilities as a foundation for evaluating and improving processes and products., • Improve production efficiencies by improving cycle times, reducing scrap, improving setup time, workstation layout and yield, by implementing cGMP., • Troubleshoot defects and trace to the root cause to determine how to change the process or the mold to eliminate the future occurrence., • Audit processes to verify documented process match actual process being used., • Ensure Setup and Process Techs are processing jobs correctly., • Maintain up to date the “Part Number Info” in the database., • Answers customer complaints and implements corrective action when necessary to resolve issues., • Provide advanced engineering support in the areas of design, manufacturing process, material characteristics related to the development and manufacture of the product., • Lead process improvement team using modern manufacturing tools and methods, e.g., Lean, Kaizen, Six Sigma, cGMP, etc., • Coordinate mold validations and tests with scheduling, molding, tool room, and quality department. Evaluate each process for automation, cycle efficiencies, and reduction of labor., • Work with the tool room to improve manufacturing capabilities of new and existing tooling., • Train and assist with mentoring of Process Technicians, Setups and key operations personnel to develop and enhance process knowledge and skills., • Work with Engineering, Production, Quality and Maintenance groups to establish, execute and monitor preventive maintenance programs., • Work with the Program manager as support to meet project deadlines., • Lead, participate in, or support continuous improvement activities., • Work with vendors and suppliers, customers and other outside technical resources to develop and improve manufacturing methods that contribute to the reduced product cost and improved product performance., • Work with Internal and External customers during product development to assure the product meets part print and function., • Work close with Tool development Engineer, Tool Room Manager, Production Manager, Maintenances Manager and Quality Manager to maintain a teamwork environment, • General Safety, • IQMS Knowledge, • Electrical Equipment Operation, • Document and Records Control, • Compliance Management, • BluePrint Reading · Awareness, agreement and advancement of company values and goals · Advanced level knowledge of engineering plastics, resins, and polymers. · Good verbal, written communication, and presentation skills and the ability to interface within a cross-functional team environment. • Extensive knowledge of injection molding machines and accessory equipment (robots, grinders, water systems/water treatment) a must., • Must have mechanical skills. Must be able to read part prints and use measuring equipment (calipers, comparators, etc.)., • Must have good communication and basic computer skills., • Must have in-depth knowledge of multi-component molding, design of experiments, basic statistics, insert molding, mold-flow analysis, and various types of process monitoring tools and techniques., • Bachelor of Science or equivalent experience required experience, • More than 5 years of engineering experience in a Medical manufacturing environment., • RGJ Master Molder 1 Certification required., • RGJ Master Molder 2 (desired not required)., • FimmTech Certification (desired not required).

Job DescriptionAbout Canopy Aerospace & DefenseCanopy A&D is built to accelerate the future of advanced materials for space, defense, and maritime systems. Canopy delivers specialized materials and components that carry customers from concept through sustainment. Canopy A&D’s advanced signal attenuation technologies and production-scale manufacturing accelerate the fielding of platforms that are faster, cooler, and quieter. Our adaptive approach ensures solutions evolve at the pace of shifting challenges, keeping our customers ahead of the curve. Role Summary: This is a full-time, on-site role for an experienced Thermal Engineer – Thermal Protection Systems located in California. The Thermal Engineer will work in a hands-on, collaborative environment, serving as a Subject Matter Expert for space and aerospace thermal applications. This role spans the entire product lifecycle, from concept generation and comprehensive thermal modeling to hardware fabrication, verification testing, and final production. The candidate will collaborate closely with multi-disciplinary engineering teams, production staff, and customers to ensure thermal protection hardware, including active/passive designs and soft goods, meets stringent performance, safety, and environmental requirements. The candidate must be a meticulous self-starter who pays attention to details, possesses excellent communication skills, and takes responsibility for driving technical solutions to resolution.Key Responsibilities: • Actively participate in the design, fabrication, and assembly of thermal protection hardware, including but not limited to cutting and sewing materials used for space and aerospace applications., • Perform comprehensive thermal modeling and analysis of flight subsystems and systems, including related thermal hardware, while collaborating closely with customer subject matter experts., • Develop thermal models of active and passive thermal designs using a mixture of numerical solutions and hand calculations of spacecraft systems, subsystems, avionics, and mechanisms that predict temperature margins in a variety of thermal space environments., • Develop thermal verification test plans, procedures, and support test activities, monitor and correlate test results to model predictions., • Participate in thermal hardware testing campaigns and qualifications including periods of off-hours or on-call work., • Work closely with other subject matter experts to define requirements, iterate through design concepts, and demonstrate overall system performance., • Collaborate with a multidisciplinary team to reduce thermal risk by identifying the constraining elements of a thermal design and recommend mitigation strategies from the concept level to design, production, and operation., • Conduct thermo-mechanical design trade studies that balance performance margins, resource use, risk, cost, and schedule., • Document analyses and designs including inputs, methods, and results as needed for presentation at design and test reviews and for hardware implementation., • Prepare technical documents and presentations to present the results of analysis and tests to Managers, Customers, and/or Stakeholders., • Interface with Program, Engineering, and Customer teams on thermal design, performance, and test issues and support other teams/disciplines, as necessary., • Develop tools to support concept trade studies and post-processing analysis., • Support Business Development activities, including proposals, white papers, and requests for information., • Effective communication with Production, Machining, Maintenance, and Quality departments to ensure timely delivery., • Capability to improve KPIs: safety, quality, on-time delivery, and efficiency., • Collaboration skills with Engineering and Contracts personnel on hiring, performance reviews, and promotions., • Ability to participate in recruitment efforts and support 5-S, health, safety, and environmental guidelines., • Competence in performing cross-functional operations and maintaining a clean work area.Required Qualifications:, • Minimum of two (4) years of direct experience working on aerospace and space sectors as thermal subject matter expert., • Strong knowledge and hands-on experience of thermal design management, surface optical treatments, cut and sow thermal protection systems including but not limited to insulation material (MLI), and composite and additive manufactured ceramic heat shields used in aerospace and space applications., • Bachelor’s degree in mechanical, aerospace engineering or other related field from an accredited organization., • Proficiency with Thermal Desktop or other similar tools accepted in the industry is necessary., • Experience developing detailed thermal and simplified thermal models for spacecraft and rocket systems, subsystems, and components including associated thermal hardware (active and passive)., • Experience with process development, as pertains to thermal analysis methods, testing methods, or model correlation., • Knowledge of environmental requirements, engineering, thermal vacuum/ambient pressure testing, including use of data acquisition systems., • Must possess an understanding of the basic principles of radiation and conduction and convection heat transfer in conjunction with space environment heating effects and parameters associated with spaceflight applications., • Deep understanding of orbital mechanics and thermal design considerations with respect to launch environment, MEO, LEO, GEO, and other orbits., • Experience with CAD software such as NX, SolidWorks, CATIA, or similar, • Proficiency with computational scripting languages (MATLAB, Python, Mathematica, etc.)., • Meticulous and organized, with the ability to manage multiple priorities in a fast-paced environment with a powerful desire to be a leader/key contributor on a small team., • Highly responsible collaborator with a cheerful outlook and excellent communication and documentation skills., • Solid foundation and familiarity with applicable industry standards and literature including but not limited to SMS-S-016, GSFC-STD-7000 and Space Mission analysis and Desing (SMAD)., • Ability to obtain and maintain a DoD US Government Secret security clearance.Preferred Qualifications:, • Experience with technical leadership responsibilities, such as serving on Risk Reduction teams or as Subject Matter Expert., • Ownership of technical issues with respect to Engineering Review Boards, NCRs, and other engineering anomalies with the expectation of bringing them to resolution., • Experience with planning, execution, and data analysis of thermal and/or mechanical testing for launch or space mission applications., • Proven experience developing full design solutions for thermo-mechanical systems used in satellites, launch vehicles or missile systems., • Experience in a production environment within the space/aerospace industry., • Knowledge of ERP systems and machining and bonding of various materials including but not limited to composites, • Knowledge of safety/environmental measures, machining operations, and inspection methods., • Familiarity with ablative materials and designing/analyzing techniques for extreme environments is a plus.

Job DescriptionElectrical Test Engineering Manager Location: Fontana, CA (Onsite)Compensation: $95,000-$130,000/year + 10% bonus Position Summary The Electrical Test Engineering Manager is responsible for leading and overseeing all electrical testing activities for substation control house and enclosure-based power distribution projects. Reporting to the Director of Design & Engineering, this role manages the test engineering and technician team, ensuring testing is executed safely, accurately, on schedule, and within budget. This is a hands-on leadership role ideal for someone with a strong background in power equipment and switchgear testing who can balance technical execution with team leadership and continuous process improvement. Key Responsibilities • Lead and manage the electrical testing team responsible for testing all components within power and control enclosures (E-Houses)., • Own the testing schedule and coordinate closely with Engineering and Production to align with overall project timelines., • Monitor daily testing progress, provide technical guidance, and troubleshoot critical issues as they arise., • Review project specifications, drawings, and schematics to ensure testing procedures meet all customer and regulatory requirements., • Review and approve test plans, test reports, and testing schematics for accuracy, completeness, and compliance with internal standards., • Ensure all completed test documentation is properly maintained, both physically and electronically, within project folders., • Develop, maintain, and continuously improve testing procedures, work instructions, and testing forms., • Oversee testing equipment inventory and ensure proper calibration, availability, and safe usage., • Lead root cause analysis and quality improvement initiatives to reduce test cycle time and improve overall efficiency., • Enforce electrical safety standards, testing protocols, and housekeeping requirements across all test areas., • Perform and support hands-on electrical testing as needed, including functional and power testing.Testing Scope Includes, • Medium-voltage switchgear and breakers, • Protective relays and relay panels, • Power distribution components within enclosures, • Communication systems and HMIs, • Panelboards and automatic transfer switches, • Fire alarm and auxiliary systems, • HVAC and supporting electrical systems within the enclosureQualifications, • Technical degree or equivalent experience in an electrical or power-related field., • 5+ years of experience in electrical or power equipment testing, ideally within substations, switchgear, or enclosure-based systems., • Strong hands-on experience with AC/DC functional testing of protective relays, MV switchgear, breakers, and arc-flash related systems., • Previous experience leading or managing test technicians or engineering teams., • Solid knowledge of electrical safety practices, NEC, IEEE standards, and applicable testing codes., • Experience producing and reviewing multiple detailed test reports per project (typically 8–10)., • NETA certification is a plus.Work Environment, • Fully onsite role based in Fontana, CA, • Hands-on shop and production testing environment, • Close collaboration with Engineering, Production, and Quality teams

Job Description COMPANY OVERVIEW: Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Certerra is a consulting firm with over 65 years of quality service that offers professional services in the southwestern United States in the fields of geotechnical engineering, environmental engineering, construction materials engineering and testing, nondestructive testing, and welding inspection. We have a full-time opportunity for an experienced Staff Engineer - Construction Materials Testing & Special Inspection in our Rancho Cucamonga, CA office. Job Summary: Staff Engineer - Construction Materials Testing & Special Inspection Staff Engineer for a leading consulting services firm specializing in Construction Materials Testing & Inspection. Duties: • Prepare and review materials test reports, • Review plans and specifications to determine materials testing requirements, • Review field and lab reports for distribution to clients, • Prepare Quality Control Plans for various disciplines, • Assist Project Managers with managing projects and deliverables, • Assist field staff with project related matters, • Preparing designs and calculations, • Assisting with proposal preparation and project tracking Education/Qualifications: • BS in Civil Engineering, • Good communication and organizational skills, • Good time management skills, • Attention to detail and problem-solving skills, • Ability to work in a team environment, • Self-starter who enjoys fast-paced environment, • Knowledge of commonly used engineering concepts, practices, and procedures, • Proficiency in Microsoft Word and Excel, • Experience with construction documents and laboratory testing Certifications/Licenses: • EIT certification preferred but not required Physical Demands: Physical examination required to obtain medical clearance to work, Report from Medical Professional. Ability to stoop, kneel and to routinely lift and carry 30 pounds Clean driving record and capable of being insured for driving company vehicles We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions

Job Description Job Description • Assist in all aspects of product development, • Project Documentation, • Product Testing, • CAD design for Product and Tooling, • Assist the Engineers and Designers with programming of both NC equipment and additive manufacturing tools, • Work directly with Engineers and Fabricators to assist in all aspects of the R&D process, • Work directly with Manufacturing team to assist in making samples and prototypes, setup processes, • Manage workload to ensure productivity with excellent inter-team communication, • Basic mechanical and programming aptitude, • 1 year SolidWorks design experience required, • Windows Office software proficiency required, • Positive attitude, hungry to learn, willing to get hands dirty, • Passionate about motorcycles and racing preferred, • Additive Manufacturing experience preferred, • Basic NC code/programming experience preferred, • Basic fabrication skills a bonusCompany DescriptionImagine yourself working for a world-renowned, premium aftermarket motorcycle exhaust company and Mountain Bike accessories. At Yoshimura R&D, we take performance and racing very seriously and this is reflected by the attitude of every employee. The result of this dedication to performance is shown in the unparalleled quality of work and high standards in every product we make. Yoshimura Research and Development of America, Inc. is a privately owned company located in Chino, California. Since it's inception in the mid 70's, Yoshimura R&D has become legendary in the aftermarket motorcycle industry.Imagine yourself working for a world-renowned, premium aftermarket motorcycle exhaust company and Mountain Bike accessories. At Yoshimura R&D, we take performance and racing very seriously and this is reflected by the attitude of every employee. The result of this dedication to performance is shown in the unparalleled quality of work and high standards in every product we make.\r\n\r\nYoshimura Research and Development of America, Inc. is a privately owned company located in Chino, California. Since it's inception in the mid 70's, Yoshimura R&D has become legendary in the aftermarket motorcycle industry.

Job Description Paramount Panels, Inc. has been in the Aerospace Industry for over 30 years in the Ontario, California area. Paramount Panels serves the aerospace industry in the manufacturing of integrally illuminated panels. We manufacture to rigid military and commercial standards. Our business philosophy stresses quick, professional response to customer needs, through a system of defined process controls that assure a finished product that meets or exceeds the requirements. Through the years, Paramount Panels Inc. has nurtured a highly qualified and motivated workforce, coupled with a competent and experienced management team. This alliance makes Paramount a leader in the illuminated panel business. Our company is an Aerospace parts manufacturer of highly visibly aircraft parts and our finishing needs to be to the exact specifications of our customers. The ideal candidate will have electrical/mechanical engineering background with some optics engineering. They will be responsible for designing and implementing engineering contract review design, electrical components into multilayer PCB’s using SolidWorks and AutoCAD and PCB design software. They will interact with the production floor for production engineering. They should be able to make quality assurance checks in order to keep the product standard high. Experience and Desired Skills - 2+ Years in Aerospace Engineering or related field • Analog design, • PWM light dimming circuits, • Current source dimming circuits, • Operational amplifiers, • Digital design, • Displays, • Logic, • Micro Controllers & programming, • Mechanical design, • CAD software, • SolidWorks, • AutoCAD/Inventor, • Printed circuit board design, • Schematic, • Layout & Artwork Responsibilities • Become familiar with specifications required for panel manufacturing such as MIL-DTL-7788, Integrally Illuminated Panels and SAE-AS-3009, Aircraft Lighting, NVIS., • Test and troubleshoot electronic assemblies., • Test panel lighting luminance and chromaticity., • Learn to operate spot meters and spectral radiometers., • Resolve manufacturing issues encountered during fabrication and assembly., • Correspond with customers to resolve manufacturing issues., • Job review, • Review new purchase orders and evaluate job requirements. Make sure we can produce and manufacture the product and that the product will meet the customers’ requirements., • Determine if any of the product manufacturing processes will require outsourcing/special processing. Determine the vendor to use for outsourcing/special processing., • Generate a planning document that will define how Paramount Panels will process the job., • Evaluate electrical products and systems to meet customer specifications, • Test finished products and system capabilities, • Will be trained on our specific equipment, • Work with our lead Engineer on projects Qualifications • Bachelor's degree in Electrical Engineering or related field, • Experience with AutoCAD and Solidworks software, • Computer efficient, • Strong problem solving, technical and math skills, • Strong written and verbal communication Employment Type • Full Time 40+ hours a week, • Full Time Onsite, • Background Check Company DescriptionParamount Panels, Inc. has been in the Aerospace Industry for over 30 years in the Ontario, California area. Paramount Panels serves the aerospace industry in the manufacturing of integrally illuminated panels. We manufacture to rigid military and commercial standards. Our business philosophy stresses quick, professional response to customer needs, through a system of defined process controls that assure a finished product that meets or exceeds the requirements. Through the years, Paramount Panels Inc. has nurtured a highly qualified and motivated workforce, coupled with a competent and experienced management team. This alliance makes Paramount a leader in the illuminated panel business. Our company is an Aerospace parts manufacturer of highly visibly aircraft parts and our finishing needs to be to the exact specifications of our customers.Paramount Panels, Inc. has been in the Aerospace Industry for over 30 years in the Ontario, California area. Paramount Panels serves the aerospace industry in the manufacturing of integrally illuminated panels. We manufacture to rigid military and commercial standards. Our business philosophy stresses quick, professional response to customer needs, through a system of defined process controls that assure a finished product that meets or exceeds the requirements. Through the years, Paramount Panels Inc. has nurtured a highly qualified and motivated workforce, coupled with a competent and experienced management team. This alliance makes Paramount a leader in the illuminated panel business. Our company is an Aerospace parts manufacturer of highly visibly aircraft parts and our finishing needs to be to the exact specifications of our customers.

Job Description Applied Sensing Technologies, Inc., a California Corporation an emerging oxygen sensors and analyzers manufacturing company requires a Sale and Marketing Engineer Sales and marketing strategy requires the appointment of Sale Reps and Distributors who understand the value of AST product line (e.g. competing against other major oxygen sensors and analyzers manufacturing companies) and is willing to make the investment in getting AST identified with end users (primarily with instrument and maintenance technicians and project engineers) by: • Calling on the instrument and maintenance technicians and product engineers, • Demonstrating O2 analyzers operation and highlighting the benefits, • Providing free samples of O2 sensors and offering Demo analyzers to major customers, • Explore sales and marketing opportunities on social media., • Appoint Sales Reps and Distributors in various territories., • Visibility of sales activities of Sales Reps and Distributors through quotes and demo sensors/equipment provided to potential customers., • Measuring the performance of Sales Reps and Distributors by quotes and sales volume, • Connecting with the sales personnel of each Sale Rep and Distributor assigned in their respective territories., • Providing Sales Reps and Distributors with sales leads generated internally., • Generate Sales Resp and Distributor’s activity report (Monthly), • Propose actions against ineffective Sales Reps and Distributors.

Job Description Are you a hands‑on creator who loves turning bold design concepts into real products people use and enjoy? We’re seeking a Product Development Engineer with an industrial design background to help shape the future of our consumer product lineup. This role blends aesthetic sensibility with technical execution, giving you ownership from early concept through production launch. You’ll work with design, engineering, and cross‑functional partners to build products that are not only mechanically sound but visually compelling and aligned with market expectations. If you thrive in a collaborative environment and enjoy influencing both form and function, this role is for you. Portfolio Required Please include a portfolio that showcases both aesthetic design and engineering execution across products developed from concept through production. What You’ll Do * Turn product concepts and design intent into manufacturable mechanical solutions * Build, refine, and validate 3D models, 2D drawings, assemblies, and BOMs * Select materials, finishes, and processes that balance performance, cost, and brand quality * Work closely with Industrial Design, Marketing, Sales, Quality, and Merchandising to elevate product aesthetics and functionality * Collaborate with global suppliers on design for manufacture and assembly, tooling, and production readiness * Lead sample reviews, pilot builds, and first‑article inspections * Support performance, durability, safety testing, and regulatory compliance * Analyze test results, solve issues through root cause analysis, and implement corrective actions * Create and maintain clear technical documentation and specifications * Continuously identify ways to improve product quality, cost, and user experience What You Bring * Bachelor’s degree in industrial design or a related field * 3–6 years of product development experience in consumer products, appliances, electronics, or related industries * * Strong SolidWorks skills (3D modeling, assemblies, 2D drawings) * Proficient with Microsoft Excel and Adobe Creative Suite (Photoshop, Illustrator, InDesign) * Solid grasp of mechanical design principles, manufacturing processes, tolerances, and basic GD&T * Comfortable working independently and collaboratively in cross‑functional teams * Exceptional visual judgment with meticulous attention to detail * Effective written and verbal communicator Location: Onsite-Chino, CA At Nexgrill, we’re all about bringing people together around the grill. Since 1993, we’ve been crafting quality outdoor cooking products—gas grills, charcoal grills, griddles, and more—designed to create memorable moments. With expertise in stainless steel, cast aluminum, and more, we deliver top-tier products at competitive prices. What We Offer: 100% employer-paid HMO health care plan Voluntary Benefits: Dental, Vision, Term Life, Accident, Critical Illness and Pet Insurance 401(K) Safe Harbor Plan for your future Generous paid time off for work-life balance Growth through training and development Fun, engaging work environment with team events Privacy Notice: This website collects certain information about its users in accordance with the California Consumer Privacy Act (CCPA). For more details on how we handle and protect your personal information, please review our Privacy Policy. Powered by JazzHR XWh9taoIs7

Job Description As a critical branch of The International Association of Plumbing and Mechanical Officials (IAPMO®) Construction Products Group, we value and employ individuals dedicated to our mission by offering: A competitive salary and benefits package, such as no-cost health, dental, life, AD&D, • LTC 14 paid holidays, • 10 days per year of vacation, • 15 paid sick days per calendar year Uniform Evaluation Services (UES) is looking for an experienced engineer to produce evaluation reports/listings for construction products by evaluating technical data and quality documentation to determine building code compliance of building products, materials and assemblies. These position is unrelated to plumbing products or plumbing certifications. Product Evaluation Engineers at UES: • Work with clients and building officials, • Evaluate technical data to determine building code compliance and produce evaluation reports/listings, • Write reports by reviewing innovative new technologies, test reports, drawings, calculations, quality documentation and supporting information to assure compliance with applicable product standards and building codes., • Develop criteria and attend evaluation/criteria committee meeting for building materials as alternatives to the building code, • Represent UES at professional organizations, standards writing bodies, industry events, technical committees. Bachelor’s degree in civil, structural, or architectural engineering or combination of similar education and work-related experience required. • Minimum 5-year relevant work experience in an Engineering field - preference for work experience in product testing/compliance, building code development or enforcement, or related field., • Professional registration/license to practice engineering required., • Reading Comprehension/ Speaking/Writing:, • Ability to read and interpret documents such as architectural and structural plans, codes and standards., • Ability to write routine reports and correspondence., • Ability to communicate effectively, with both non-technical and technical personnel verbally and in writing., • Ability to speak effectively after groups of customers or employees of the organization., • Travel required as needed to attend conferences, meetings, and other functions.

Job DescriptionSenior Electrical Engineering ManagerTarget Starting Base Salary: $180,000-$210,000/year (+15% Annual Bonus)LA, CARelocation assistance will be offered to qualified candidates. OverviewWe are seeking an experienced Senior Electrical Engineering Manager to lead a multi-site electrical engineering organization responsible for the design, development, and testing of medium-voltage switchgear, PDUs, relay/control systems, and substation-related equipment. This is a high-impact technical and leadership role overseeing a team of approximately 15 engineers and technical staff across the U.S. and Canada. The ideal candidate is both a hands-on technical expert and a strategic leader with a strong background in switchgear, power distribution equipment, and UL/industry codes—paired with proven success elevating engineering processes, capabilities, and team performance. Organization BreakdownReporting to the Director of Engineering, the Senior Electrical Engineering Manager will provide technical direction, operational leadership, and strategic guidance for the electrical engineering function. This role partners closely with mechanical engineering, operations, testing, and project management to ensure high-quality, manufacturable designs and successful project execution. This leader will oversee teams in: • LA, CA: Assistant Engineering Manager, 8 Design Engineers, 1 Drafter, and Electrical Testing Manager, • Dallas, TX: 2 Electrical Design Engineers and 1 Electrical Test Engineer, • Serve as the technical SME for switchgear, PDUs, substation engineering, and UL/ANSI/IEEE/NEC standards., • Define and execute long-term engineering strategies aligned with organizational goals and industry advancement., • Guide the design, development, testing, and validation of electrical systems—including switchgear, substation control equipment, protection & control systems, and power distribution products., • Stay current with emerging technologies, tools, and industry trends.People Leadership & Development, • Lead, mentor, and grow a distributed team of electrical design engineers, test engineers, a subordinate team manager, and technical support staff., • Build capability and consistency across sites through onsite coaching, training sessions, and technical reviews., • Support recruitment, onboarding, career development, and team succession planning., • Foster a culture of innovation, accountability, and continuous improvement.Operational Excellence & Process Improvement, • Drive scalable engineering workflows and implement best practices across all locations., • Improve standardization in design processes, documentation, and testing methods., • Partner with mechanical engineering, manufacturing, project management, and production to enhance design for manufacturability and reduce rework., • Manage engineering project schedules, budgets, and resource allocation.Cross-Functional Collaboration, • Represent engineering in customer engagements and support strategic customer initiatives., • Work closely with business development to address customer needs and drive product reliability and satisfaction., • Bachelor’s degree in Electrical Engineering (or related field)., • 10+ years of progressive electrical engineering experience, including at least 5 years in a leadership role., • Deep technical expertise with medium-voltage switchgear, power distribution equipment, PDUs, and substation systems., • Strong knowledge of UL, ANSI, IEEE, NEC, and similar codes/standards., • Proven track record leading engineering teams and delivering complex electrical projects., • Experience driving process improvements within engineering or manufacturing environments., • Ability and willingness to travel regularly to Dallas and Ontario during the workweek., • Experience in an OEM environment (preferred) or in the utility/power distribution sector., • Master’s degree in Engineering or Engineering Management., • Professional Engineer (PE) license.

Job Description About Us: Cubic Machinery, a machine tool builder and robotics integrator, has been in business for over 30 years. We proudly serve top-tier aerospace and precision manufacturing companies in the US, Canada & Mexico. Our engineering-driven approach integrates reliable technologies into time and money-saving machines. Located in Chino, California, we are expanding our team to meet customer demand. Position: Swiss-Type CNC Lathe Application Engineer • Location: Chino, CA Conveniently located with access to 60, 71, 57 freeways., • Experience Required: • 3+ years of setup and programming experience with Swiss-type lathes such as Tsugami, Citizen, Star, Tornos, etc., • Proficiency using FANUC multi-axis controls • Responsibilities: • Understand customers' machining needs and produce proof of concepts and sample parts quickly using our machine tools., • Analyze part blueprints, recommend machining strategies, select machine & tooling and workholding., • Design fixtures, part grippers, program tool paths, and setup jobs, • Create part programs directly on control or using offline software, create setup sheets, • Run first article inspection, optimize program to meet cycle time, tool life, and quality requirements, • Troubleshoot basic machine problems, ensure quick turnaround, keep workplace organized, • Help sales team prepare presentations of recommended machine tool • Note: We are not a production shop; we create sample parts and test cuts for end-users to evaluate our machines. Powered by JazzHR hxxAZSMlmb

Job Description Job Category: Full-Time/ Direct Hire Compensation: $ 100,000 - $140,000 DOE/Salary + Comprehensive benefits package BBSI is partnering with an industry leader in crane systems to find a talented Structural Engineer to help design and ensure the structural integrity of lifting systems used in industrial, aerospace, and commercial applications. This role offers the chance to work on specialized, hands-on projects from design through execution—all while collaborating with a dedicated team of mechanical, electrical, and structural experts So if you are a Licensed Civil or Structural Engineer looking to apply your skills in a unique and impactful way, we want to talk to you! Duties: • Conduct load and stress calculations and select appropriate materials, • Ensure compliance with industry codes (OSHA, ASCE, AISC, etc.), • Collaborate with internal teams to integrate systems with existing infrastructure, • Review and approve technical drawings and project specifications, • Conduct site visits to assess structural conditions and provide solutions, • Create reports, documentation, and technical proposals Qualifications: • Active PE license (Professional Engineer) or in progress, • Bachelor’s or Master’s degree in Civil or Structural Engineering, • Minimum 2 years of relevant experience (structural or industrial construction preferred), • Proficient in AutoCAD, Revit, and structural analysis tools, • Deep understanding of steel design and load-bearing systems, • Excellent problem-solver Benefits: • Competitive compensation package, • Full health, dental, and vision coverage, • 401(k) with company match, • Holiday, sick pay, and Vacation

Job DescriptionSenior Geotechnical Engineer Senior Geotechnical Engineer Position Overview We are seeking a highly skilled Senior Geotechnical Engineer to join our team. The ideal candidate will be responsible for conducting geotechnical investigations, analyzing soil properties, and providing expert guidance on foundation design and soil stability. This role requires a strong background in geotechnical engineering principles and practices, with a focus on delivering high-quality engineering solutions for various projects. Key Responsibilities • Conduct geotechnical site investigations and assessments, • Analyze soil and rock samples to determine engineering properties, • Prepare geotechnical reports and design recommendations, • Collaborate with project teams to ensure geotechnical considerations are addressed in design, • Provide expert advice on foundation design, slope stability, and earth retention systems, • Review and interpret geotechnical data and reports from junior engineers, • Ensure compliance with relevant engineering standards and regulations, • Mentor and train junior geotechnical engineers and techniciansQualifications, • Bachelors degree in Civil Engineering or Geotechnical Engineering, • Professional Engineer (PE) license required, • Minimum of 5 years of experience in geotechnical engineering, • Strong knowledge of site investigation techniques and soil analysis, • Experience with geotechnical software and modeling tools, • Excellent communication and interpersonal skills, • Ability to work independently and in a team environment, • Medical, dental, vision, • PTO, • Holidays - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 12/10/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Here, they learn theory and practical application of nuclear physics and reactor engineering.