Engineering jobs in Everett, Washington - Page 2Create job alerts

Job Description Fiber Optic Telecommunications Engineer, Technician; provides day to day operations and maintenance support for Cable Landing Station, subsea cables wet plant and terrestrial telecommunications network. Key Responsibilities / Functions: Troubleshoot and repair terrestrial and submarine DWDM fiber optic telecommunications systems. Monitor and maintain DC power systems, network management computers and associated peripherals. Perform routine maintenance per manufacturer’s recommendations on a variety of facility support equipment. Use standard telecommunications test equipment to isolate and repair problems across multiple networks. Maintain and update physical equipment inventory using the inventory database system. Install, test and terminate fiber jumpers and CAT5/6 cables. Company DescriptionSuccessful, well-established submarine/ terrestrial high-capacity fiber optic telecommunications company. Small company with long term successful record. Small team means your contributions will be recognized.Successful, well-established submarine/ terrestrial high-capacity fiber optic telecommunications company. Small company with long term successful record. Small team means your contributions will be recognized.

Job Description Job Title: Manufacturing Engineer Department: Engineering Reports to: Engineering Manager Shift: 1st Position Purpose: The manufacturing Engineer is responsible for designing, improving, and integrating manufacturing systems, equipment, and processes to support production efficiency, product quality, and cost reduction. This role works cross-functionally to support New Product Introduction, troubleshoot production issues, and ensure manufacturability of new designs and processes. Essential Duties and responsibilities  Study, analyze and design methods, procedures, processes, layouts, fixtures and tooling to support process efficiency and product quality.  Identify and recommend resolutions for existing or imminent manufacturing problems, equipment failures, or safety issues.  Recommend cost reduction initiatives and manufacturing process improvements.  Participate in the review and evaluation of product design changes.  Coordinate with support groups to ensure manufacturability; process capabilities and capacities are developed to support new products.  Develop, monitor and report on project schedules and establish Standard Operating Procedures for new and updated manufacturing equipment and systems.  Collaborate with quality, production, and engineering teams to troubleshoot production and equipment issues.  Lead root cause analysis and implement corrective actions for recurring issues.  Develop manufacturing instructions or procedures and train assemblers and operators in machine operations, processes or assembly applications.  Responsible for following all Vaupell policies and standard operating procedures and safety practices.  Other duties as assigned. Job Qualifications/Requirements  Bachelor's degree in engineering + 2 years of directly related manufacturing engineering experience or related technical discipline.  Strong understanding of manufacturing methods, materials, equipment, and quality systems.  Requires knowledge of design techniques, tools and principals involved in production of precision technical plans blueprints, drawings and models.  Knowledge of Lean and Six Sigma tools required.  CAD proficiency/design background is a plus.  Candidate must be comfortable working hands-on on the manufacturing floor.  Ability to read, speak, understand and follow instructions in English.  Must be able to wear and properly use the required personal protective equipment. Candidates must be a “US Person” (i.e. US Citizen or Permanent Resident) to ensure Vaupell's compliance with ITAR (International Traffic in Arms Regulations) and EAR (Export Administration Regulations) Environmental Condition While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to fumes, airborne particles, and vibrations. The noise level in the work environment is usually moderate to occasionally loud. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements Required physical skills and abilities (see below)  A = 20% or less of work time  B= 20 to 60% of work time  C = 60% or more of work time  Blank = Not applicable Standing C Bending at waist A Walking C Reaching below shoulder level A Sitting C Reaching above shoulder level A Lifting under 25 lbs. A Grasping C Lifting 25 to 50 lbs. A Handling C Lifting over 50 lbs. A Finger Dexterity C Carrying under 25 lbs. A Feeling C Carrying 25 to 50 lbs. A Eye-Hand coordination C Carrying over 50 lbs. A Eye-Hand-Foot coordination A Pushing under 25 lbs. A Hearing, ordinary C Pushing 25 to 50 lbs. A Hearing, other (explain below) Pushing over 50 lbs. A Seeing – near vision acuity C Climbing stairs A Seeing – far vision acuity C Climbing ladders A Depth perception C Balancing A Color perception C Kneeling A Keyboarding C Crawling A Pulling C Turning/twisting A Other Vaupell reserves the right to change, modify or add to the Essential Duties and Responsibilities of any position at any time.

Job Description About magniX Based in Washington state, magniX is a leader in electric propulsion for aerospace & defense, working to revolutionize how the world connects by transforming the way aircraft are powered. magniX has been at the leading edge of electric propulsion innovation for quite some time, proving our technology in flight. We are now ready to take our technology and products to market. Be part of a passionate team that is ushering in the 3rd era of aviation. About the role Join magniX as an ESS Test Engineer and play a pivotal role in advancing electric aviation through cutting-edge lithium-ion battery technology. You'll lead comprehensive testing programs for Energy Storage Systems, from individual cell characterization to full-scale integrated battery systems, supporting the development of next-generation electric aircraft propulsion. This position reports directly to the Test Engineer Manager. Primary Responsibilities: Laboratory Leadership & Operations • Commission and operate state-of-the-art battery laboratories for development testing, design verification, and failure mode analysis, • Execute comprehensive testing protocols spanning individual components, battery modules, and complete integrated systems on test rigs and aircraft platforms, • Partner with program management, simulation, design, and test integration teams to develop testing strategies, define requirements, and coordinate resource allocation, • Collaborate with instrumentation specialists to design, install, and maintain advanced data acquisition systems optimized for ESS testing, • Create and maintain comprehensive technical documentation including test instructions, plans, reports, and datasets within our quality management framework, • Develop advanced data processing solutions using LabVIEW, HBM Perception, and/or Python for measurement, control, and analysis, • Support ESS integration into flying test platforms and participate in flight test operations, • Provide on-site technical support at customer locations and adapt to rotating shift schedules as program needs require, • Bachelor's degree or higher in Engineering (Mechanical, Chemical, Electrical, Materials Science, or related discipline). Master’s is preferred., • Proven battery testing knowledge including cell characterization, module testing, and system-level validation, • Experience with battery cyclers (Maccor, Arbin, NEWARE or similar) and potentiostat systems (BioLogic or similar), • High-voltage DC systems proficiency with experience in HVDC sources and supporting electrical equipment, • Advanced LabVIEW proficiency with additional skills in MATLAB, Python, or C++ highly valued, • Physical capability to lift, carry, and push up to 50 lbs Advanced Technical Skills • Electrochemical characterization expertise including dQ/dV analysis and electrochemical impedance spectroscopy (EIS), • Experience in lithium-ion abuse testing such as UN38.3 compliance tests and DO-311A safety tests, • FAA certification experience with aircraft systems and components, • Battery safety and failure mode analysis background, • Quality management system experience in regulated industries, • Applicants must be willing and able to commute to magniX's location in Everett, Washington. magniX benefits include: • 100% company-paid premiums for medical, dental, and vision insurance (for employees & dependents)., • 9.5% 401K company contribution., • Life insurance., • ADD insurance., • Long-term and Short-term Disability Insurance., • Employee Assistance Program (EAP)., • 4 weeks paid vacation + 1-week annual end-of-year shutdown, sick time, and 11 paid holidays., • Relocation package available This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” is required. A “U.S. Person” includes U.S. citizens, lawful permanent residents, refugees, or asylees. As this position requires access to export-controlled data, an appropriate export authorization by the U.S. Government may be required prior to such access. Employment, and the continuity of employment of non-U.S. persons, is contingent upon the company’s ability to secure and maintain the necessary export control authorization. magniX is an equal opportunity employer. We value and embrace diversity. We do not discriminate on the basis of race, color, national origin, religion, gender, gender identity or expression, sexual orientation, marital status, age, or disability status.

Job Description About magniX: Based in the beautiful Pacific Northwest, magniX is a pioneer in electric propulsion and battery technology for the aerospace industry. We’re working to revolutionize how the world connects by transforming the way aircraft are powered. magniX has been at the leading edge of electric propulsion innovation for almost 20 years, and has successfully demonstrated our technology in flight. We are now on the path to take our proven technology and innovative products to market. Join us to be part of a passionate team that is ushering in a new era of aviation. About the role : The Mechanical Engineer is responsible for the design and delivery of magniX’s electric powertrain products. The Mechanical Engineer will evaluate requirements and use cases to create and iterate detailed CAD models of design options – including rotatives, structures, materials/lubrication selections, assembly processes, and test methods. Additionally, the Mechanical Engineer will be expected to support design documentation development and release, write technical reports, test requirements, and analyze test results. Primary Responsibilities: • Apply aerospace standard design practices to electric aircraft motors and sub-components, including machined components, bearing selection/sizing, material selection, coatings, fasteners, lubricants, DFM., • Conduct trade studies on design and manufacturing options, identify methods for risk reduction and technology development., • Produce complete design packages – detailed drawings, analysis reports, BOMs, assembly instructions., • Conduct reviews of designs, manufacturing plans, and test procedures to ensure compliance with design and performance requirements., • Coordinate with other departments through hardware delivery and operations (Quality, Sourcing, Manufacturing, Testing, etc.)., • Lead resolution of technical problems, achieving buy-in from cross-functional teams., • Bachelor’s degree in mechanical or aerospace engineering., • 3+ years of relevant work experience, • Aviation propulsion systems experience preferred, • Hardware delivery experience and sound technical knowledge of electric machine design is preferred. Compensation & Benefits • 100% company-paid premiums for medical, dental, and vision insurance (for employees & dependents)., • 4 weeks paid vacation + 1-week annual end-of-year shutdown, sick time, and 11 paid holidays., • 401K retirement plan with industry leading 9.5% company contribution., • Company paid Life insurance, AD&D, Short-Term and Long-Term disability insurance E-Verify: magniX utilizes E-Verify for employment eligibility verification Pre-employment Screenings: Employment with magniX is contingent upon satisfactory completion of pre-employment requirements including a background screen. EHS/Environmental Requirements: This job operates in a manufacturing and testing environment. While performing the duties of this job, the employee routinely is required to use hands to keyboard, communicate, listen to, and interpret instructions and remain stationary for extended periods of time. This would require the ability to move around the facility and occasionally move/lift items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. Required PPE (Personal Protective Equipment): Required PPE provided by magniX based on the employee’s position and exposure. Below are typical PPE used on the manufacturing and testing floor: • Ear Plugs - Earmuffs, • Safety shoes Diversity and Inclusion: magniX is an equal opportunity employer. We value and embrace diversity. We do not discriminate on the basis of race, color, national origin, religion, gender, gender identity or expression, sexual orientation, marital status, age, or disability status.

Job Description SUMMARY The Manufacturing Engineering is a key role in the product development process and is responsible for ensuring producibility of products and robustness of process throughout the product lifecycle. Key involvement includes design for manufacturability early in the product development, ensuring intrinsic quality is built-in to the product through robustness of processes and supporting continuous improvement and maintenance throughout the production cycle. The Manufacturing Engineer position is focused on driving manufacturability aspects through engineering and production activity while continuing to build essential skills and experience. Reports to the IPT Lead. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* WHAT YOU WILL DO • Integral part of product design team w/ primary responsibilities for DFMA, • Mentors junior manufacturing engineers, • Responsible for establishing, monitoring and validating production processes and controls – is processed owner or subject matter expert on critical processes, • Designs, develops and implements complex and critical forms of fixtures, tools, and inspection gages to facilitate fabrication and assembly, • Instrumental in material and resource planning and coordinating with the Product team to ensure schedules are kept, • Leads manufacturing work flow planning and production line setup, • Solves complex technical problems utilizing technical reference materials and various inspection tools and techniques, • Collaborates with all levels of other engineering disciples in representing manufacturing engineering WHAT WE ARE LOOKING FOR • Required Education: Bachelor of Science in Manufacturing Engineering, Mechanical Engineering, or equivalent degree., • Minimum 4 years relative industry experience, • Demonstrated strong mechanical aptitude required and hands-on engineering experience in a fabrication and assembly shop environment., • Ability to read and generate blueprints, drawings, and technical diagrams., • Familiarity with basic material properties, in process verification and validation, • Must be proficient in GD&T. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job DescriptionVista Clara Inc. is a technology based-company that develops and manufactures magnetic resonance tools for groundwater characterization. In addition, our advanced nuclear magnetic resonance (NMR) geophysical instruments are used for environmental, mining, and energy resource investigations. In business since 1997, Vista Clara is the world’s only geophysical instrumentation company with an exclusive focus on NMR technology. Our unique expertise enables the company to rapidly develop and commercialize technologically advanced NMR instruments, and to leverage our portfolio of hardware and software technologies across a growing line of products. Vista Clara is seeking a full-time Electrical Engineer with 0-2 years of experience in system-level electronics modeling, design, and testing. Applicants with more significant level of experience are welcome to apply. The Electrical Engineer will work closely with both the Research & Development (R&D) and Manufacturing teams at Vista Clara Inc.. This is an opportunity for an early career and motivated engineer to join a dynamic, high-tech company, performing innovative design and development to advance nuclear magnetic resonance (NMR) technologies for groundwater investigation in variety of earth sciences and industries. The Electrical Engineer will work from Vista Clara’s office in Mukilteo, WA. Requirements: • Bachelor’s degree in Electrical Engineering., • 0 to 2 years of relevant post education experience., • Excellent research skills with an analytical mindset., • Hands-on experience with circuit design (schematic capture) and basic PCB layout., • Basic experience with programming in one or more languages to run equipment tests (C#, C++, C, Matlab, Python, Java, LabView/TestStand, etc.), • Hands-on electronics prototyping experience, including soldering and board test., • Basic understanding of analog and digital circuitry and ability to read schematics., • Able to effectively prioritize multiple tasks and make independent decisions that promote/advance the company goals and objectives, • Ability to prepare technical documentation, test plans, work instructions, and manuals., • Proficient in operation instrumentation for testing hardware, including oscilloscopes, spectrum analyzers, hi-pot testers, multimeters, etc., • Enthusiasm for taking on multiple roles and working across disciplines with a small team., • Excellent verbal and written communications skills., • Undertake some domestic and international travel., • B.Sc. in Electrical Engineering., • Experience in the developing and testing of analog electronics from the board level to the system level., • Experience with manufacturing processes preferred., • Experience developing and implementing the best practices and industry standards for electrical circuit design., • Experience with design for manufacturability., • Extensive experience testing and troubleshooting electrical systems, • Experience in magnetic resonance, ultrasound, seismic, or active acoustic measurement systems are relevant., • Experience in low-frequency RF electronics, digital control and communication electronics, high voltage power supplies, and IGBT modules., • Interest in environmental geoscience and groundwater hydrology. Numerous professional growth and leadership opportunities exist within the R&D department, including project management and product management. Applying: Attachment of a cover letter is preferred. Compensation: $35.00 - $37.00 per hour, depending on experience. Benefits: • Health Insurance that begins the 1st day of the month following your start date, • SEP-IRA account with annual contributions by the employer, • 20 days of PTO, • 6 paid holidays, • Optional life insurance To Learn More: Please visit for more information about our company, our products, and case studies. Vista Clara has partnered with All Things HR, an external HR Consulting Company, to assist with their recruitment process. If you would like to be a part of this dynamic company, please apply today! Powered by JazzHR ocuvnYFqqw

Job Description Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 55+ locations and growing! Atwell, LLC is a proud recipient of the following 2024 awards: • Nine consecutive years in a row as a "Best Place to Work" (#16) by Zweig Group, • Recognized as #10 in the "Top 100 Fastest Growing AEC Firms" in the U.S. by Zweig Group, • Recognized as #71 in the ENR Top 500 Design Firms, ranked in every region., • Recognized in Crains "Fast 50" as one of the fastest-growing firms based in Michigan., • Recognized in Crains Magazine as one of Michigan's largest privately held companies. What You'll Be Doing: As an experienced Project Engineer, you will lead civil engineering projects with a strong focus on public infrastructure, including roadway improvements, utility systems, stormwater management, and municipal facilities. You will play a key role in the planning, design, and execution of projects that enhance communities while contributing to the growth of our firm. Technical Proficiency: * Apply engineering principles and best practices to public works projects, including roadway design, water/wastewater systems, stormwater management, and site grading. * Prepare and review design plans, specifications, and cost estimates for municipal and transportation infrastructure projects. * Utilize engineering software such as AutoCAD Civil 3D, WaterCAD, StormCAD, and SewerCAD to develop detailed designs. Project Lifecycle Management: * Manage projects from planning and preliminary design through construction administration, ensuring adherence to budgets, schedules, and regulatory requirements. * Coordinate with multidisciplinary teams, including surveyors, planners, and environmental specialists, to ensure successful project delivery. Permitting and Regulatory Compliance: * Navigate the local and county-level permitting processes for public infrastructure projects. * Work with municipal agencies, DOT, and other government entities to secure approvals and ensure compliance with regulations. * Develop innovative solutions to address complex permitting and environmental challenges. Client & Stakeholder Engagement: * Build and maintain strong relationships with municipal clients, public agencies, and community stakeholders. * Assist in business development by identifying new opportunities and preparing proposals for public works projects. * Represent the company in public meetings, hearings, and presentations as needed. Qualifications: * Bachelor's Degree in Civil Engineering from an EAC/ABET Accredited University. * Professional Engineer (PE) Licensure Required. * Experience with public works projects in Washington State preferred. * Proficiency in AutoCAD Civil 3D, WaterCAD, StormCAD, and SewerCAD preferred. #LI-BL1 Pay Range$105,000—$160,000 USD Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs. Work/Life: • Generous Paid Time Off, • Paid Parental Leave, • Flexible work schedules are available for some positions, • Competitive Compensation packages, • Annual bonuses, spot bonuses and peer recognition awards, • 401K match - 1:1 up to 4% of compensation, • Tuition Assistance, • Student Loan Repayment up to $25K, • Paid Licensing / Certification Fees and Renewals, • Financial Rewards for Obtaining Licensure, • Employee Referrals up to $5,000, • Annual Wellness Reimbursement up to $500 for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.), • Medical (BC/BS), Dental (Delta), and Vision (VSP), • Family Planning & IVF Benefits, • Pet Insurance, • Health Savings Account & Flex Spending Account options, • Employer paid LTD, STD, and life insurance, • Metlife Supplemental Benefits covering accident, hospitalization, and critical illness, • Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services

Job DescriptionSalary: $25 - $35 per hour DOE Do you want to make a difference in your community? Are you interested in investing your time and skill set into a company to ensure you have a long-term career path? Do you want to be part of a growing company who truly cares about people and treats employees like family? CPM | Tenant Improvement Solutions is a full-service Commercial General Contractor located in Snohomish County. We are a fast-paced, hard-working group of people who enjoy serving others and making a difference. We are seeking a Building Engineer to join our Facility Maintenance team. The Building Engineer is responsible for the overall maintenance and upkeep of commercial buildings. This position requires a thorough understanding of safety practices, building systems, and general maintenance procedures. The Building Engineer must have strong problem-solving and communication skills and be able to work independently and as part of the facilities team. These efforts must be coordinated with the Director of Facilities Maintenance to ensure that the company goals and objectives are met through team participation. Building Engineer Duties and Responsibilities • Inspect and perform preventive maintenance on all building systems and equipment, including heating, ventilation, and air conditioning (HVAC), plumbing, electrical, elevators, and security systems., • Respond to emergency maintenance requests and assess the building for potential safety hazards., • Perform minor repairs and maintenance tasks as required., • all Monitor building equipment to ensure proper functioning., • Prepare reports and documents related to building maintenance and repairs., • Ensure that the building meets safety, health standards & regulations., • Coordinate with outside vendors and contractors for maintenance and repair services., • Assist in managing building maintenance budget. What to Expect • Within 3 months you will have a firm understanding of your job description and expectations as well as CPM core company values, culture, and structure, you will have a solid foundation of who and where to go to for information. You will have completed the baseline Procore/MHelpdesk training with your direct report., • Within 6 months you will be self-sufficient in your role, empowered to perform your duties while demonstrating your personal core values in line with those of CPM. You will have a solid foundation of weekly interval schedules., • Within 9 months you will know all your team members, you will be woven into the CPM culture. You will have a firm grasp of navigating Procore/MHelpdesk as well as intricate knowledge and expectations as a part of the Facility Maintenance team., • Within 12 months you will be at or above the pace of your peers (that is within you to decide), you will be leading and driving daily work requests at full capacity, exceeding expectations. At this time, you will have your annual review. What We Offer • Competitive pay, • Paid sick leave, • Paid time off, • Holiday pay, • Health, dental, vision insurance, • Monday to Friday, occasional after hours call outs for building emergencies, • Pay Range: $25-$35/hour DOE

Job Description About magniX: Based in the beautiful Pacific Northwest, magniX is a pioneer in electric propulsion and battery technology for the aerospace industry. We’re working to revolutionize how the world connects by transforming the way aircraft are powered. magniX has been at the leading edge of electric propulsion innovation for almost 20 years, and has successfully demonstrated our technology in flight. We are now on the path to take our proven technology and innovative products to market. Join us to be part of a passionate team that is ushering in a new era of aviation. About the role : As an Aircraft Integration Engineer, you will be part of a versatile team dedicated to integrating magniX’s electric powertrains onto various aircraft platforms. You’ll work across propulsion, control, energy storage, display and other aircraft systems. This role will involve interfacing with mechanical, structures, electrical, thermal, software and systems engineering disciplines defining and maintaining interface requirements. This role will be a key interface to magniX’s customers, and the ideal candidate will have a track record of customer interaction and management, as well as experience in the entire life cycle of aerospace development. Primary Responsibilities: • Coordinate integration of magniX products onto various aircraft platforms., • Coordinate multidisciplinary integration design projects within an ARP4754 systems engineering framework to integrate magniX products onto various aircraft platforms., • Interface with internal teams to develop and manage customer and aircraft level system requirements, as well as aircraft level verification methods, and test cases., • In conjunction with internal engineering groups and external partners design, select and source sub-systems and components for powertrain integration., • Identify and mitigate integration risks and implement design solutions., • Generate and contribute to technical documentation supporting powertrain installation and integration (e.g., Interface Control Documents, System Description Documents)., • Participate in the internal definition of customer-oriented system requirements., • Communicate technical content to clients, teams, suppliers, and other professionals and present data to groups and individuals., • Bachelor’s degree in Aerospace, Mechanical or Electrical Engineering or related field., • 3+ years’ experience with integration and retrofit aircraft components (engines, avionics, software, electrical systems, etc.)., • Experience with integrating electric propulsion systems into aircraft advantageous., • Familiarity with FAR 23, 25, 27, 29, 33, 35; RTCA DO-160, DO-178, DO-254., • Experience with aircraft displays and communication protocols (ARINC 429, ARINC 825, CANaerospace) advantageous, • Willingness to travel to suppliers, testing sites, and customer locations. Compensation & Benefits • 100% company-paid premiums for medical, dental, and vision insurance (for employees & dependents)., • 4 weeks paid vacation + 1-week annual end-of-year shutdown, sick time, and 11 paid holidays., • 401K retirement plan with industry leading 9.5% company contribution., • Company paid Life insurance, AD&D, Short-Term and Long-Term disability insurance E-Verify: magniX utilizes E-Verify for employment eligibility verification Pre-employment Screenings: Employment with magniX is contingent upon satisfactory completion of pre-employment requirements including a background screen. EHS/Environmental Requirements: This job operates in a manufacturing and testing environment. While performing the duties of this job, the employee routinely is required to use hands to keyboard, communicate, listen to, and interpret instructions and remain stationary for extended periods of time. This would require the ability to move around the facility and occasionally move/lift items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. Required PPE (Personal Protective Equipment): Required PPE provided by magniX based on the employee’s position and exposure. Below are typical PPE used on the manufacturing and testing floor: • Ear Plugs - Earmuffs, • Safety shoes Diversity and Inclusion: magniX is an equal opportunity employer. We value and embrace diversity. We do not discriminate on the basis of race, color, national origin, religion, gender, gender identity or expression, sexual orientation, marital status, age, or disability status.

Job Description Must be available to work 1- 2 days in Skagit. SUMMARY The Manufacturing Engineer II supports designs through the design-development cycle and into production with emphasis of design producibility, manufacturing process development and support, and oversees the transition of product to production including follow on support. The manufacturing engineering role is pivotal in developing methods of manufacture, work instructions and production line operations to ensure product quality is built into the final product. The Manufacturing Engineer II position is focused at supporting engineering and manufacturing activity while continuing to build essential skills and experience. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* WHAT YOU WILL DO • Includes Manufacturing Engineering I duties and responsibilities, • Integral part of product design team and provides DFMA input, • Validates and monitors fabrication and production process and controls, • Designs, develops and implements all forms of fixtures, tools, and inspection gages to facilitate fabrication and assembly, • Generates, tracks and maintains bill of materials for assemblies, methods of manufacture and work/build instructions, • Instrumental in material and resource planning and coordinating with the Product team to ensure schedules are kept, • Assists with planning manufacturing work flow and space requirements, • Solves technical problems utilizing technical reference materials and various inspection tools and techniques, • Supports or may lead prototype builds and evaluations of materials and processes WHAT WE ARE LOOKING FOR • Required Education: Bachelor of Science in Manufacturing Engineering, Mechanical Engineering, or equivalent degree, • Minimum 2 years relevant industry experience, • Strong mechanical aptitude required, hands-on engineering experience in a fabrication and assembly shop environment is desired, • Ability to read blueprints, drawings, and technical diagrams, • Familiarity with basic material properties, in process verification and validation, • Must be a U.S. Citizen EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law.Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description SUMMARY We are seeking a Chief Engineer to serve as a company-wide authority for the mechanical and structural design of pyrotechnic mechanisms. This role combines deep technical ownership with program-level leadership: guiding requirements interpretation, tailoring standards and processes to program needs, and actively managing risk. The Chief Engineer will ensure that pyrotechnic devices — including cutters, initiators, separation joints, and energetically actuated release systems — are safe, robust, producible, and compliant. This is both a technical and leadership role: driving designs from CAD to qualification, mentoring engineers, and representing engineering decisions to program managers, customers, and safety boards. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Lead development of pyrotechnic mechanisms (initiation systems, separation systems, release devices, cutters, etc) from conceptual design through qualification and low-rate production., • Translate system-level requirements into mechanical/structural solutions., • Identify implied and derived requirements early to prevent scope creep and misinterpretation., • Develop and enforce design guidelines, analysis methodologies, and test plans to ensure robustness and repeatability of pyrotechnic devices., • Define DFM/DFA practices and ensure manufacturability with suppliers and internal manufacturing teams., • Provide hands-on oversight during build, test, qualification, and flight operations of energetic systems., • Own technical risk management for pyrotechnic hardware: identify key risks (design, materials, manufacturing, testing), maintain risk registers, and drive mitigation actions., • Tailor standards, processes, and qualification approaches to program needs — balancing rigor, cost, and schedule while maintaining compliance., • Lead design and safety reviews, documenting rationale for tailoring and maintaining alignment with customer and regulatory expectations., • Support proposal efforts by defining scope, risk, and technical approach for new business opportunities., • Represent mechanisms engineering in customer meetings, technical interchange meetings (TIMs), and safety boards., • Bachelor’s degree in Mechanical, Aerospace, or related Engineering field (Master’s or PhD preferred)., • 15+ years of experience in the design and qualification of pyrotechnic or energetic mechanisms in aerospace, defense, or related industries., • Deep knowledge of energetics, ignition systems, detonation/deflagration physics, and mechanism actuation principles., • Proven record of leading multidisciplinary teams and serving as a technical authority., • Demonstrated expertise in safety and compliance for energetics handling, storage, and testing., • Strong familiarity with DoD and NASA regulations governing energetic systems., • Hands-on experience with test planning, execution, and data reduction for pyrotechnic devices., • Excellent communication skills; capable of representing the company to customers, suppliers, and regulators. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description FLSA Status: Exempt Sign-On Bonus: $5,000.00 Summary This position is responsible in the research, design and substantiation of the mechanical seat design within the Seat Engineering department utilizing established modeling and drafting standards. The Seat Design Engineer assist with the design and development of engineering packages based on customer and OEM requirements for production, retrofit applications and product development. Essential Duties and Responsibilities include the following with other duties as assigned: • Perform design assignments in accordance with established design standards independently., • Assigned design tasks include but not limited to: commercial aircraft seat mechanical design, mechanical seat installations, detailed assemblies and seat mechanical specifications., • Maintains or modifies top level mechanical seat assemblies or components based on defined requirements using approved processes and tools., • Participates in teams to support the development of designs. Reviews and approved the documentation of design implementation., • Obtain, interpret, and analyze OEM airplane seat install or layout drawings using approved processes and tools., • Provides liaison support for assigned duties to manufacturing and/or in-service issues., • Troubleshoots mechanical seat systems problems., • Actively support engineering department goals and initiatives., • Coordinate with other departments as necessary., • Utilize internal drawing/document standards per customer or regulatory agency requirements., • Perform engineering design checks and sign documents, with periodical technical guidance from Supervisor/Functional Manager., • Perform engineering design analysis (such as preliminary Stress analysis or Kinematics Analysis), design validation (such as validate analysis models against test data) and task scope (such as work scope validation)., • Perform engineering design approvals (design/approval authority) and task scheduling (such as detailed schedule of a given task per program requirements)., • Perform engineering projects scope review, project time estimates and project RFQ commitment along with resources planning and assignments., • Act as design authority for design tasks., • Define engineering tasks for PE/Functional Manager., • Provide mentoring and performance management input to Functional Manager., • Some domestic or international travel may be required. Qualifications Requirements To perform this job successfully, an individual must be able to perform each essential duty to the established department standards (i.e. meet published metrics). The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Knowledge and Skills: • Drafting skills in CATIA V5 (or higher) and/or Solidworks preferred., • Must be able to provide complicated lay-outs and program design studies., • Must be able to function as part of a design team or a design team (up to 6 SDE’s)., • Thorough understanding of manufacturing processes preferred., • Thorough understanding of Boeing/Aircraft/SAE Seat Design Standards/Requirements. Education and/or Experience BS degree Mechanical Engineering, Aerospace Engineering or related Engineering field (8 years or more of experience) or equivalent working experience (15 years minimum in an aerospace related field). Language Skill • Ability to read and interpret documents such a Federal Aviation Requirements; Airframe OEM and industry requirements regarding Seat Design and Installation; operating and maintenance instructions and procedure manuals. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Customer Orientation Must demonstrate concern and take actions to meet requirements and high standards of quality of both internal and external customers. Must display courtesy and sensitivity. Manage difficult situations. Meet commitments. Respond promptly to customer needs. Solicit customer feedback to improve service. Physical Demands While performing the duties of this job, the employee is frequently required to stand, walk, sit, talk and hear. Specific vision abilities required by this job include close vision. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet. Jamco is passionate about providing a competitive and comprehensive benefits package and pleased to offer the following to eligible employees- • Medical Coverage, • Dental and Vision Reimbursement, • 401(k) Retirement Savings Plan, • Benefit Conversion at Termination, • Bereavement Leave, • Educational Assistance, • Family and Medical Leave, • Paid Parental Leave (40 hours) *Qualifying event after June 15th, 2022, • Flexible Benefit Plan (Flex Spending), • Holidays, • Jury Duty/Witness Service Leave, • Life Insurance, • Long-Term Disability, • Short-Term Disability, • Pregnancy Leave, • Paid Time Off (PTO), • Personal Leave

Job Description FLSA Status: Exempt SUMMARY The Sr. Certification Engineer is responsible for developing and executing Seat certification programs ensuring that for both Seat TSO products and Seat Surround Furniture products all approved certification procedures, delegations, regulatory and OEM requirements, policies, and approved methods of compliance are followed. Essential Duties and Responsibilities include the following with other duties as assigned: • Perform a wide variety of certification-related tasks requiring a complete understanding of FAA regulations and guidance material. Represent Jamco certification interests in technical interface meetings with airline customers, suppliers, OEMs and the FAA, exhibiting mature interpersonal, language, and leadership skills., • Communicate with project team members to identify and compile correct work scope, schedule, design details, risks, and other pertinent factors impacting seat certification in support of project proposals. Develop tools/databases and standardized estimate values for future projects., • Act as subject matter expert for seat certification issues in a variety of areas, including flammability, dynamic and static testing, design compliance, and aircraft installation and integration., • Lead the development, preparation, and documentation of standardized regulatory and certification guidance material. Assist in obtaining FAA approval, as required., • Lead and/or support the development of certification test plans and reports ensuring compliance to regulatory and OEM requirements., • Lead and/or support, as required, other Certification Engineers and Certification Specialists on major projects., • Assist the Director of Seat Engineering & Certification, as required, in support of Jamco Seat certification projects., • Review prototype designs and drawings; identify and communicate necessary changes., • Identify potential certification issues and any adverse impact. Analyze problems and derive appropriate solutions., • Oversee and assist as necessary with test article build and conformity., • Develop tools, as necessary, to track deliverables, testing, compliance findings, to assure on-time completion of certification tasks., • Prepare certification management reports which include current performance metrics, historical results, budget, forecasts, and/or performance trends., • Identify and incorporate lessons learned/best practices into organizational procedures., • Monitor latest industry issues and documents, participate in aircraft interior industry committees and communicate information to applicable team members., • Maintain a safe, secure and legal work environment, adhering to all company policies and procedures., • Maintain and protect the confidentiality of the Company s information and products. Supervisory Responsibilities This job may include supervisory and leadership responsibilities over other Certification Engineers and Certification Specialists assigned to Jamco Seat certification programs. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All external hiring is contingent upon the successful completion of a pre-employment drug screen and a criminal background check. Requirements Education and Experience: • General Engineering: Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various systems, goods and services., • General Design: Able to read and understand Computer Aided Design (CAD) designs, drawings and specifications. General knowledge of design techniques, tools, and principles involved in production of precision technical plans, drawings, and models. Familiar with CAD modeling tools used by Jamco America., • Certification/Aircraft Design: Extensive knowledge of EASA/FAA requirements for the installation of aircraft interior system/subsystem components, e.g. 14 CFR/CS Part 25, and OEM Design requirements (Airbus/Boeing Design Manual/Specifications, Standard Interface Documents, etc). Extensive understanding of aircraft terms, design requirements and certification processes., • Problem Solving: Identify increasingly complex problems and understanding related information to evaluate and develop options and implement solutions., • Critical Thinking: Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Using scientific rules and methods to solve problems is required., • Mathematical: Ability to work with mathematical concepts and measurements and apply concepts such as fractions, percentages, ratios, trigonometry, imaginary number, and proportions. Ability to use various formulas embedded and linkage amongst cells in spreadsheet program., • Customer Orientation: Must demonstrate concern and take actions to meet requirements and high standards of quality of both internal and external customers. Must display courtesy and sensitivity. Manage difficult situations. Meet commitments. Respond promptly to customer needs. Solicit customer feedback to improve service., • Communication: Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate and not interrupting at inappropriate times. Communicating effectively in writing as appropriate for the needs of the audience. Talking to others to convey information effectively. Good oral and written communication skills., • Language: Ability to write technical documents and formal business correspondence. Ability to read and interpret technical documents such as safety rules, operating and maintenance instructions, drawings, technical data, engineering documentations, governmental regulations, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively to groups of customers, other employees, or organizations., • Judgment and Decision Making: Able to coordinate with outside organizations, such as program management and/or marketing/customer, to obtain critical data for review and appropriate decision making. Able to coordinate and lead Initial Technical Coordination Meetings (ITCM), Preliminary Design Review (PDR), and Critical Design Review (CDR) meetings., • Time Management: Managing one's own time and team resources/time allocation. Able to multitask and work independently and in a team environment., • Attitude: Demonstrate continuous skill improvement. Positive attitude is required. Language Skill • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers of employees of organization. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Customer Orientation Must demonstrate concern and take actions to meet requirements and high standards of quality of both internal and external customers. Must display courtesy and sensitivity. Manage difficult situations. Meet commitments. Respond promptly to customer needs. Solicit customer feedback to improve service. Physical Demands While performing the duties of this job, the employee is frequently required to stand, walk, sit, talk and hear. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet. Jamco is passionate about providing a competitive and comprehensive benefits package and pleased to offer the following to eligible employees- • Medical Coverage, • Dental and Vision Reimbursement, • 401(k) Retirement Savings Plan, • Benefit Conversion at Termination, • Bereavement Leave, • Educational Assistance, • Family and Medical Leave, • Paid Parental Leave (40 hours) *Qualifying event after June 15th, 2022, • Flexible Benefit Plan (Flex Spending), • Holidays, • Jury Duty/Witness Service Leave, • Life Insurance, • Long-Term Disability, • Short-Term Disability, • Pregnancy Leave, • Paid Time Off (PTO), • Personal Leave, • Wedding Leave, • Wellness Program/Gym Reimbursement, • Pet Insurance

Job Description Water Resource Engineering Manager Full-time exempt Professional Everett, Everett, WA, US Kirkland, Kirkland, WA, US Lake Oswego, OR, US Salary Range: $125,000 To $200,000 (USD) Annually PACE Engineers is a Pacific Northwest engineering firm providing civil and structural engineering, planning, surveying, and construction management services from offices in Washington and Oregon. With 135 employee-owners, we are recognized for our expertise, passion, and commitment to clients and communities. Collaboration is central to our culture, enabling us to leverage the creativity and dedication of our teams across all locations, while maintaining a people-first approach that makes PACE both a strong partner and a vibrant community. Ready to ignite your career while doing engaging engineering work that has an impact on the communities we live and work in? Our projects are based in the beautiful Pacific Northwest, where we provide technical expertise and engineering design for stream restoration and fisheries projects. We are looking for an innovative experienced Water Resources Engineering Manager to lead and grow our water resources group. This position offers the opportunity to manage a talented team of engineers and scientists, drive strategic growth, and deliver impactful projects that restore ecosystems and improve habitat connectivity across the Pacific Northwest. WHAT YOU'LL BE DOING • Provide leadership and direction for the fish passage and stream team, including staff development, workload management, and mentoring., • Build and expand client relationships, pursue new opportunities, and contribute to the business development and strategic planning., • Lead the design and delivery of fish passage projects, including culvert replacements, stream simulation, and habitat connectivity improvements, • Manage projects budgets, schedules, and resources to ensure successful outcomes., • Serve as the technical leader in hydrologic and hydraulic modeling to support planning and design., • Prepare and review engineering calculations, design drawings, technical reports, and construction documents., • Conduct and supervise site assessments, field investigations, and data collection., • Provide technical guidance and mentorship to junior engineers and staff., • Collaborate with interdisciplinary teams, including biologists, planners, and environmental scientists., • Support permitting and regulatory compliance with federal, state, and local agencies., • Communicate effectively with clients, agencies, and stakeholders to advance project goals. QUALIFICATIONS: • Bachelor’s degree in civil engineering, Environmental Engineering, or related field., • Professional Engineer (PE) license in Washington State., • 10+ years of progressive experience in water resources engineering, including hydrology and hydraulics with at least 3 years in a leadership or management role., • WSDOT Fish Passage and Stream Restoration Design certification or ability to obtain it within 1-year., • Proficiency with HEC-RAS, HEC-HMS, AutoCAD/Civil 3D, or related design software., • Demonstrated experience preparing and reviewing construction documents., • Excellent communication, leadership, and project management skills. PREFERRED: • Direct experience with fish passage design, stream restoration, or aquatic habitat projects., • Knowledge of Washington State permitting requirements (WSDOT, WDFW, Ecology, and local jurisdictions)., • Familiarity with GIS applications., • Master’s degree in water resources or environmental engineering. BENEFITS SNAPSHOT: • Hybrid work model & flexible scheduling, • 401(k) & ESOP (Employee Stock Ownership Plan), • Medical, dental, vision, HSA/FSA, • Paid time off, holidays, and wellness programs, • Short & long-term disability, life, and AD&D insurance, • Culture that supports belonging, equity, and inclusion PACE is an Equal Opportunity Employer and values diversity in the workplace. We encourage all qualified applicants to apply.

Job Description About magniX: Based in the beautiful Pacific Northwest, magniX is a pioneer in electric propulsion and battery technology for the aerospace industry. We’re working to revolutionize how the world connects by transforming the way aircraft are powered. magniX has been at the leading edge of electric propulsion innovation for almost 20 years, and has successfully demonstrated our technology in flight. We are now on the path to take our proven technology and innovative products to market. Join us to be part of a passionate team that is ushering in a new era of aviation. About the role : The Structural Analysis Engineer performs the structural analysis of our Electric Propulsion Unit components. The role involves performing thermo-mechanical analyses (including static, fatigue, damage tolerance, vibration, dynamics) using classical hand calculations, Finite Element Methods, and other toolsets as required, in accordance with internal, customer, and regulatory requirements. Primary Responsibilities: • Plan and perform structural analyses of Electric Powertrain components to optimize for weight, strength, life, or other functional requirements, • Experiment with and analyze various materials, manufacturing processes, design tolerances, and other factors in the developmental process, • Prepare and approve analysis reports and present results during project reviews, • Drive the development of technical and certification requirements for Electric Propulsion Units for aviation applications, and the definition of test program requirements for validation and compliance to applicable requirements, • Help establish clearly documented structural analysis requirements, methods, tools, and FEM techniques across the company, • Bachelor’s degree in mechanical engineering, aerospace engineering, or related equivalent, • 3+ years of experience with static, fatigue, damage tolerance & FEM analysis of aerospace, turbomachinery, or spacecraft structures, preferably in a product development environment, • In-depth understanding of loading scenarios, free body diagrams, structural behavior of aircraft propulsion system components, • Practical experience using Finite Element Analysis, ANSYS preferred, for metallic and composite analysis – including static, dynamic, and thermal analyses., • Experience with metallic and composite structural analysis using classical analysis methods, • Experience with aerospace validation and certification processes, • Sound technical knowledge of electric machine design is a plus Compensation & Benefits • 100% company-paid premiums for medical, dental, and vision insurance (for employees & dependents)., • 4 weeks paid vacation + 1-week annual end-of-year shutdown, sick time, and 11 paid holidays., • 401K retirement plan with industry leading 9.5% company contribution., • Company paid Life insurance, AD&D, Short-Term and Long-Term disability insurance E-Verify: magniX utilizes E-Verify for employment eligibility verification Pre-employment Screenings: Employment with magniX is contingent upon satisfactory completion of pre-employment requirements including a background screen. EHS/Environmental Requirements: This job operates in a manufacturing and testing environment. While performing the duties of this job, the employee routinely is required to use hands to keyboard, communicate, listen to, and interpret instructions and remain stationary for extended periods of time. This would require the ability to move around the facility and occasionally move/lift items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. Required PPE (Personal Protective Equipment): Required PPE provided by magniX based on the employee’s position and exposure. Below are typical PPE used on the manufacturing and testing floor: • Ear Plugs - Earmuffs, • Safety shoes Diversity and Inclusion: magniX is an equal opportunity employer. We value and embrace diversity. We do not discriminate on the basis of race, color, national origin, religion, gender, gender identity or expression, sexual orientation, marital status, age, or disability status.

Job Description Ardurra is seeking a Entry Level Civil Engineer to join our team in the Northwest Region! We pride ourselves on having a business focus while thriving in a team-oriented, collaborative, and fun work environment! Northwest Locations: • Nampa, ID, • Meridian, ID, • Spokane, WA, • Coeur d'Alene, ID, • Wenatchee, WA, • Cody, WY, • Cheyenne, WY, • Salt Lake City, UT, • Heber City, UT, • Everett, WA, • Bachelor's Degree in Civil Engineering, • EI/EIT Certificate preferred, • Minimum 1 year experience working in the civil engineering field, • Strong computer skills, • Experience with AutoCAD Civil 3D and/or MicroStation a definite plus, • Self-motivated, team-oriented individual with the ability to work on challenging projects in a team environment, • Assists with water and wastewater distribution/collection and treatment projects, • Assists in client contact and communication pertaining to specific projects, • Assists in the development of cost estimates for various projects, • Keeps Project Manager informed of workload and any changes in project scope or additional services, • Prolonged periods sitting at a desk and working on a computer, • Ability to navigate various locations and settings of the company, • Occasionally lift and/or move up to 25 pounds $65,000 to $80,000 (DOE) Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-FP1

Job Description Mechanical Engineer Contract Sigma Design has collaborated with an aerospace company seeking an experienced. Mechanical Engineer to join their facility in Everett, WA. This company designs human-machine interface products, offering balanced lighting solutions for cockpit needs. This position is an contract with an expected duration of 9 months. This role is In-Office While on contract you are eligible for: • Multiple options for medical insurance and dental insurance including some with FSA and HSA, • 401(k) with up to 4% company match, • 15-days of accrued PTO and 9 company paid holidays, • Quarterly bonus program, • Voluntary benefits: vision, long-term disability, and life insurance, • Salary: $100k - $135k annually, DOE Essential Job Functions - Responsibilities: • Participate in and lead cross functional teams to create, release and support state of the art products, • Manage changes to project scope, schedule, and costs using appropriate verification techniques, • Oversee and participate in product validation and qualification testing, • Manage the design of electromechanical systems to meet customer requirements, • Partner with customers and vendors to resolve technical issues, • Analyze, optimize, build, test and refine new product and sustaining solutions to meet functional, cost, reliability, and manufacturability goals, • Apply your expertise in prototyping, manufacturing processes, materials, post-processes, coatings & finishes, • Create and modify 3D models, component drawings and assembly drawings using PTC CREO and Windchill, • Conduct failure analysis to determine root cause and correct issues, • Manage documentation and maintain configuration control and export compliance in a PLM system, • Provide technical guidance and mentorship for other engineers, • Bachelor's Degree in Mechanical Engineering or related degree, • Minimum of 5 years of relevant work experience with electronics packaging, • Experience or interest in Optical Engineering and Lighting preferred, • Experience with 3D CAD modeling software, PTC WF4 or CREO is preferred, • Experience within a manufacturing environment, dealing with aerospace or in a highly regulated industry desired, • Experience with DO160 or similar preferred, • Excellent communication and documentation skills, • ITAR - Permanent resident of the United States (“U.S. person” as defined by ITAR) SigmaDesign is an Equal Opportunity Employer Powered by JazzHR Ym8ppjvdJE

Job DescriptionSalary: $105,000 - $135,000 Annually Licensed Professional Engineer (PE) - Forensic Engineer/Building Envelope Specialist Do you thrive on solving complex building challenges and signing off on work that makes the built environment safer and stronger? J2 Building Consultants is looking for aForensic Engineer to lead envelope-related structural design, analysis, and inspections across the Pacific Northwest and beyond. This is not just a design role - it's a mix of fieldwork, code compliance, forensic investigation, and collaboration. Youll work closely with project managers, designers, and clients to assess and improve buildings inside and out. If you enjoy being the technical expert, the one who spots what others miss, and the person who can both do and teach - we want to hear from you. WHAT YOU'LL DO Stamp with Confidence Review and approve drawings, calculations, and designs related to building envelope systems. Apply your seal knowing its backed by real analysis and experience. Solve Structural Mysteries From cladding and roof supports to forensic assessments, you'll investigate performance issues, identify root causes, and propose durable, code-compliant solutions. Lead with Expertise Collaborate with cross-functional teams and guide junior staff. Be the person we turn to when something just doesnt add up. Balance Office and Field Split your time between analysis, report writing, and site investigations. From crawlspaces to rooftops, youll get hands-on with the buildings youre improving. You'll be doing more than just stamping drawings - here's a deeper look at your day-to-day responsibilities. JOB DESCRIPTION • Professional Engineering and Design:, • Perform detailed structural analyses and engineering evaluations for building envelope systems, including waterproofing, insulation, air barriers, and cladding., • Review and approve structural calculations, designs, and modifications to ensure stability, safety, and adherence to applicable codes., • Provide expert insights into building envelope solutions to enhance structural performance, sustainability, and energy efficiency., • Quality Assurance and Approvals:, • Apply professional engineering stamp on approved designs, drawings, and proposals to certify structural integrity and regulatory compliance., • Conduct thorough reviews of project plans, proposals, and technical reports for accuracy, feasibility, and compliance with industry standards., • Work closely with project managers and design team to resolve any structural or design concerns during the planning and implementation stages., • Project Management:, • Oversee projects from inception through completion, ensuring project timelines, budgets, and client expectations are met., • Collaborate with architects, contractors, and other stakeholders to provide project guidance, address structural challenges, and ensure smooth project execution., • Manage project documentation, reporting, and communication with clients, ensuring transparency and maintaining high levels of customer satisfaction., • Building Envelope Expertise:, • Apply specialized knowledge of building envelope systems in the design, evaluation, and inspection of building facades, roofs, and other envelope components., • Conduct field assessments, inspections, and forensic evaluations of existing building envelopes, identifying and diagnosing structural or performance issues., • Advise on retrofit and repair solutions for building envelope issues, providing expertise on sustainable and durable material selection., • Team Collaboration and Mentorship:, • Support and mentor junior engineers and technical staff, promoting professional development and knowledge-sharing within the team., • Stay current with advancements in structural engineering, building codes, and building envelope technology to continuously enhance project outcomes and team expertise. WHO YOU ARE 57+ years of structural engineering experience Licensed Professional Engineer (PE) in WA preferred Bonus if you're also licensed in OR, UT, or ID Proficient in structural analysis software Strong communicator with solid writing skills - we write a lot of reports Comfortable in the field and in client meetings Detail-oriented, curious, and confident in your judgement - even when the solution isn't obvious Enjoy mentoring and contributing to a collaborative team WORKING CONDITIONS & PHYSICAL REQUIREMENTS This role is based in an office - but youll be out in the field just as often. That means: Traveling locally and regionally to job sites Conducting inspections in all weather conditions Climbing ladders, accessing roofs, entering crawlspaces and tight areas Sitting at a desk writing reports and reviewing drawings when you're not in the field Carrying gear up to 50 lbs when needed If you like variety and being hands-on with your projects, youll love the balance here. WHAT YOULL GET Competitive salary + monthly incentive bonuses 100% employer-paid Medical, Dental, and Vision for employees - dependents can be added at the employee's cost Employee Assistance Program (EAP) 401(k) with company match Paid vacation and sick time, plus 8 holidays HSA, Costco & Gym membership reimbursements Monthly cell phone reimbursement Company-paid Life, AD&D, and Disability insurance Professional development support A solid team that values trust, autonomy, and high standards Ready to Apply? Were looking for someone whos technically sharp, reliable, and ready to take ownership of their work - while helping others grow. If that sounds like you, apply now. We ask just a few short questions - no fluff. Note: This is a hybrid field/office role with required in-person presence. Applicants must be able to reliably commute MondayFriday. And just so you know: Yes, this is a real open position. No ghost postings, no AI bots screening your app. Every application is reviewed by an actual human (hi, thats me ). Equal Employment Opportunity Statement At J2 Building Consultants, were committed to being an Equal Opportunity Employer. That means every qualified candidate and employee has access to fair, equitable opportunitiesno matter their race, color, religion, national origin, sex, gender identity or expression, sexual orientation, age, marital status, veteran status, disability, or any other characteristic protected by law. This commitment applies to all areas of employment, including hiring, promotions, compensation, training, and day-to-day workplace culture. Our practices are aligned with the Civil Rights Act of 1964 (Title VII), along with all other applicable federal, state, and local employment laws. What Inclusion Looks Like at J2 We know that building a truly inclusive environment takes intention and consistency - not just policies. Were continuously working to create a workplace where everyone feels respected, valued, and able to contribute fully as themselves. That means: • Welcoming and embracing diverse backgrounds, perspectives, and experiences, • Encouraging connection and collaboration across differences, • Promoting open dialogue and treating one another with respect, • Creating a safe space where everyone can show up authentically, • Building relationships based on trust, care, and mutual dignity We strongly encourage individuals from diverse backgrounds and experiences to apply and grow with us. If you have questions about our hiring practices or our commitment to equity and inclusion, feel free to reach out to .

Job Description SUMMARY We are seeking a Chief Engineer to serve as a company-wide authority for the mechanical and structural design of mechanisms. This role combines deep technical ownership with program level leadership: guiding requirements interpretation, tailoring standards and processes to program needs, and actively managing risk. The Chief Engineer will ensure that pyrotechnic devices - including cutters, initiators, separation joints, and energetically actuated release systems - are safe, robust, producible, and compliant. This is both a technical and leadership role: driving designs from CAD to qualification, mentoring engineers, and representing engineering decisions to program managers, customers, and safety boards. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* WHAT YOU WILL DO • Lead development of pyrotechnic mechanisms (initiation systems, separation systems, release devices, cutters, etc) from conceptual design through qualification and low-rate production., • Translate system-level requirements into mechanical/structural solutions., • Identify implied and derived requirements early to prevent scope creep and misinterpretation., • Develop and enforce design guidelines, analysis methodologies, and test plans to ensure robustness and repeatability of pyrotechnic devices., • Define DFM/DFA practices and ensure manufacturability with suppliers and internal manufacturing teams., • Provide hands-on oversight during build, test, qualification, and flight operations of energetic systems., • Own technical risk management for pyrotechnic hardware: identify key risks (design, materials, manufacturing, testing), maintain risk registers, and drive mitigation actions., • Tailor standards, processes, and qualification approaches to program needs - balancing rigor, cost, and schedule while maintaining compliance., • Lead design and safety reviews, documenting rationale for tailoring and maintaining alignment with customer and regulatory expectations., • Support proposal efforts by defining scope, risk, and technical approach for new business opportunities., • Represent mechanisms engineering in customer meetings, technical interchange meetings (TIMs), and safety boards., • Mentor and develop engineers, growing in-house expertise in mechanism design and pyrotechnics. WHAT WE ARE LOOKING FOR • Bachelor's degree in Mechanical, Aerospace, or related Engineering field (Master's or PhD preferred), • 15+ years of experience in the design and qualification of mechanisms in aerospace, defense, or related industries., • Proven record of leading multidisciplinary teams and serving as a technical authority., • Demonstrated expertise in safety and compliance for energetics handling, storage, and testing., • Strong familiarity with DoD and NASA regulations governing energetic systems., • Hands-on experience with test planning, execution, and data reduction., • Experience with system integration into spacecraft, launch vehicles, missiles, or defense systems., • Knowledge of alternative actuation systems (e.g., SMAs, EEDs, mechanical devices) to enable trade studies., • Active DoD Secret (or higher) clearance, or ability to obtain one. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description About magniX: Based in the beautiful Pacific Northwest, magniX is a pioneer in electric propulsion and battery technology for the aerospace industry. We’re working to revolutionize how the world connects by transforming the way aircraft are powered. magniX has been at the leading edge of electric propulsion innovation for almost 20 years, and has successfully demonstrated our technology in flight. We are now on the path to take our proven technology and innovative products to market. Join us to be part of a passionate team that is ushering in a new era of aviation. About the role : We are seeking a Supplier Development Engineer to support magniX’s groundbreaking electric propulsion programs. In this role, you will identify and engage world-class suppliers, ensure technical compliance, and serve as a key interface between internal teams and external partners. Your work will directly impact quality, cost, and delivery performance across our supply chain. Primary Responsibilities: • Supplier Engagement: Lead identification, technical assessment, and onboarding of suppliers for electric motors, power electronics, and battery energy storage systems, ensuring alignment with magniX design requirements., • Cross-Functional Collaboration: Work closely with Supply Chain, Quality Assurance, Engineering, and Program teams to resolve component quality and delivery issues while driving continuous improvement initiatives., • Capability Assessment: Conduct in-depth technical evaluations of supplier processes and capabilities to meet magniX timelines and quality standards., • Process Optimization: Partner with suppliers to implement cost-effective improvements that enhance efficiency and reduce waste., • Data Analysis & Reporting: Track and analyze technical, delivery, and quality metrics, providing timely reports to support senior management decision-making., • Bachelor’s degree in Mechanical, Electrical/Electronics, Manufacturing, Aerospace Engineering, or related field., • Experience in electric vehicle and/or aerospace supply chain ecosystems., • Strong knowledge of root cause analysis and problem-solving methodologies (8D, FMEA, SIPOC)., • Familiarity with AS9100 or equivalent quality management systems and aerospace product/process validation per AS9102. Compensation & Benefits • 100% company-paid premiums for medical, dental, and vision insurance (for employees & dependents)., • 4 weeks paid vacation + 1-week annual end-of-year shutdown, sick time, and 11 paid holidays., • 401K retirement plan with industry leading 9.5% company contribution., • Company paid Life insurance, AD&D, Short-Term and Long-Term disability insurance E-Verify: magniX utilizes E-Verify for employment eligibility verification Pre-employment Screenings: Employment with magniX is contingent upon satisfactory completion of pre-employment requirements including a background screen. Export Control Compliance: To meet export control compliance requirements, candidates must be a “U.S. Person” (U.S. citizens, lawful permanent residents, refugees, or asylees). As this position requires access to export-controlled data, an appropriate export authorization by the U.S. Government may be required prior to such access. Employment, and the continuity of employment of non-U.S. persons, is contingent upon the company’s ability to secure and maintain the necessary export control authorization. Diversity and Inclusion: magniX is an equal opportunity employer. We value and embrace diversity. We do not discriminate on the basis of race, color, national origin, religion, gender, gender identity or expression, sexual orientation, marital status, age, or disability status.

Job Description JAMCO AMERICA, INC. Job Title: Proposal Engineer 5 FLSA Status: Exempt Pay: $111,000.00-$165,000.00 Summary The Proposal Engineer is responsible for supporting the Sales and Engineering Departments. Coordinate proposal activities in conformance with customer needs create initial budget, preliminary Bill of Materials and Work Statement within company guidelines. Essential Duties and Responsibilities include the following with other duties as assigned: • Support Sales and Engineering departments by evaluating customer requests for various Jamco America revenue streams, Aircraft Modifications, OEM Products, Certification Services and Seats Products., • Evaluate customer needs, create initial budget, preliminary Bill of Materials and Work statement for basis of Commercial Proposal and Engineering work statement., • Define recurring kit cost budget, preliminary schedule and required travel requirements., • Support and coordinate with various departments within Jamco America including Mechanical and Electrical Engineering groups, Stress, Mechanical Systems, Certification, Flammability Testing and Technical Publications groups to develop, negotiate and finalize program budgets for each department., • Attend/participate in weekly status meetings with the sales and marketing team as well as Program Management team., • Develop and maintain the department database. Supervisory Responsibilities This job has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All external hiring is contingent upon the successful completion of a pre-employment drug screen and a criminal background check. Requirements Education and/or Experience: Position requires completion of a Bachelor's degree in Mechanical Engineering field for job proficiency and 8 years related experience. Requires demonstrated experience in any of the following: 1) design or manufacture of aircraft interiors, 2) design or manufacture of aircraft modifications, 3) design or manufacture of aircraft products such as Galleys, Lavatories, Partitions, Class Dividers, PSU’s, Stowbins, IFE Systems etc. and 4) design of manufacture of seat products. It is desirable, but not required, that candidates have experience in quoting and estimating recurring engineering hours required to complete engineering assignments. Other desirable experience includes: knowledge of FAA and EASA aircraft and component level certification requirements and technical publications. Must display Advance skills in MS Office products and have the ability to learn other company software including Smarteam, Epicor and Industrios. Moderate travel within the U.S. and abroad may be required to support JAMCO America programs. Language Skill • Ability to read and interpret documents such a stately rules, operating and maintenance instructions and procedure manuals., • Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers of employees of organization. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Customer Orientation Must demonstrate concern and take actions to meet requirements and high standards of quality of both internal and external customers. Must display courtesy and sensitivity. Manage difficult situations. Meet commitments. Respond promptly to customer needs. Solicit customer feedback to improve service. Physical Demands While performing the duties of this job, the employee is frequently required to stand, walk, sit, talk and hear. Specific vision abilities required by this job include close vision. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet. Jamco is passionate about providing a competitive and comprehensive benefits package and pleased to offer the following to eligible employees- • Medical Coverage, • Dental and Vision Reimbursement, • 401(k) Retirement Savings Plan, • Benefit Conversion at Termination, • Bereavement Leave, • Educational Assistance, • Family and Medical Leave, • Paid Parental Leave (40 hours) *Qualifying event after June 15th, 2022, • Flexible Benefit Plan (Flex Spending), • Holidays, • Jury Duty/Witness Service Leave, • Life Insurance, • Long-Term Disability, • Short-Term Disability, • Pregnancy Leave, • Paid Time Off (PTO), • Personal Leave, • Wedding Leave, • Wellness Program/Gym Reimbursement, • Pet Insurance

Job DescriptionPosition Title: Outside Plant Engineer $70,413 to $104,830 annually DOE Comprehensive health benefits include: medical, dental, vision, 401k, flexible spending account, paid sick leave and paid time off, parental leave, quarterly performance bonus, training, career growth and education reimbursement programs. At Ziply Fiber, our mission is to elevate the connected lives of our communities every day. We’re delivering the fastest home internet in the Northwest, with a focus on areas traditionally underserved by mainstream internet companies. And as our state-of-the-art fiber network expands in WA, OR, ID and MT, so does our need for team members who can help us grow and realize our goals. We may be building internet, but we are reaching real people. We strive to build relationships and provide customers and communities with refreshingly great experiences. We emphasize our values in all our interactions: Genuinely Caring: Our customers and colleagues are people, and quite possibly our neighbors. We put ourselves in their shoes and give them our full attention. Empowering You: We empower our customers to choose the products that best meet their needs, and we support our employees to implement solutions that elevate the experiences of our customers and coworkers. Innovation and Improvement: We always look for ways to make the experiences of our customers – and each other – better. Earning Your Trust: We earn trust by communicating simply and transparently as real people, not as a corporation. Job Summary The Outside Plant Engineer will be responsible for the application engineering of telecommunications outside plant in a local serving exchange environment. The Outside Plant Engineer is a subject matter expert of for all technical aspects of outside plant facilities and associated work such as cable sizing, cable counts, cable records and permitting for ROW’s and easements. This position works as a team member with Network Planning, Central Office, Transmission and Operations to support the growth, replacements, and upgrade of telecommunications plant facilities. Essential Duties and Responsibilities: The Essential Duties and Responsibilities listed below are a range of duties performed by the employee and not intended to reflect all duties performed. • Frontline project management for all construction activities associated with outside plant activity., • Engineering design for outside plant all projects locally, • Engineering design and activity support for the ZFB Build projects, • Proactive review of outside plant facilities to determine necessary upgrades and enhancements., • Coordinate with all utilities for project design and construction to utilize joint trench., • Communicate with all peers and departments to insure proper project planning., • Maintain accurate cable records and updates., • Attend pre construction meetings for project designs., • Apply for all permits as required (State, DNR, City, County, Townships)., • Maintain and investigate ROW’s and easements for releases., • Prepare cost estimates for BDT’s., • Respond to DOR’s as needed., • Update records according to As-Builts., • Support sales, marketing, operations and regulatory as needed., • Assist in annual budget design., • Performs other duties as required to support the business and evolving organization. Qualifications: • Bachelor’s degree in Engineering or equivalent work experience required., • Minimum of 3 years’ experience in an outside plant position required., • Experience in ROW, private easement and permitting with local, state, and federal entities., • Must possess and maintain a valid State Driver's License and satisfactory driving record., • Must complete a pre-employment drug screening. Knowledge, Skills, and Abilities • Ability to manage multiple projects in various stages of activity and meet critical deadlines., • Ability to drive on behalf of the company in a safe and responsible manner. Work Authorization Applicants must be currently authorized to work in the US for any employer. Sponsorship is not available for this position. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining the physical condition necessary for bending, stooping, sitting, standing, or walking for prolonged periods of time, including walking up to 2 miles when in the field performing duties. The employee must occasionally lift and/or move up to 25 pounds and frequently use hands and repetitive motions to drive stakes into the ground using a hammer. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. This role requires driving and requires the ability to perform all functions of operating a motor vehicle regularly and safely. Work Environment and Additional Information Work is performed in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse, and multi-line telephone system. The work is primarily a modern office setting. At all times, Ziply Fiber must be your primary employer. Unless otherwise prohibited by law, employees may not hold outside employment nor be self-employed without obtaining approval in writing from Ziply Fiber. In holding outside employment or self-employment, employees should ensure that participation does not conflict with responsibilities to Ziply Fiber or its business interests. Diverse Workforce / EEO Ziply Fiber is an equal opportunity employer. Ziply Fiber will consider all qualified candidates regardless of race, color, religion, national origin, gender, age, marital status, sexual orientation, veteran status, and the presence of a non-job-related handicap or disability or any other legally protected status. Ziply Fiber requires a pre-employment background check as conditions of employment. Ziply Fiber may require a pre-employment drug screening. Ziply Fiber is a drug free workplace.

Job Description About magniX Based in Washington state, magniX is a leader in electric propulsion for aerospace & defense, working to revolutionize how the world connects by transforming the way aircraft are powered. magniX has been at the leading edge of electric propulsion innovation for quite some time, proving our technology in flight. We are now ready to take our technology and products to market. Be part of a passionate team that is ushering in the 3rd era of aviation. About the role The Motor Control Engineer II develops and optimizes motion control algorithms for electric motors, ensuring efficiency and reliability. The role involves cross-functional collaboration, system integration and validation, supporting the lifecycle from design to certification while maintaining technical documentation and troubleshooting test findings. Primary Responsibilities: • Design, develop, and implement advanced motion control algorithms and simulation models for electric motors, focusing on efficiency, stability, and reliability across varied conditions., • Architect and test high-performance control platforms for high-power converters/inverters, collaborating on embedded software/firmware implementation using model-based approaches., • Define test plans, perform validation, and continuously improve algorithms based on test data, considering load variations and thermal impacts., • Develop and maintain technical documentation, substantiation reports, simulation files, test data processing, and reports to align with certification requirements., • Maintain accurate records of all design files, analysis, and test data in appropriate platforms identified by magniX., • Contribute to cross-functional collaboration between software, power electronics, electromagnetic, and system teams to ensure seamless integration of motion control designs into the powertrain system., • Support testing teams in test data processing, test reports, and troubleshooting findings in different test campaigns. Qualifications Required: • B.S. or higher degree in Electrical Engineering, Control Engineering, or a related field., • 2+ minimum years of experience for Bachelors or Masters, will consider PhD directly out of school., • Experience in designing and developing high-performance motion control for PMSMs., • Knowledge of power converter topologies, modulation strategies, and advanced motor control algorithms, with expertise in field-oriented control techniques., • Experienced in control algorithm validation through simulation and hardware testing, with a focus on performance optimization, reliability, and regulatory compliance. Preferred: • Proficiency in using real-time digital simulation tools (RTDS, OPAL-RT, Typhoon) for implementing and testing control software., • Competency with model-based programming languages for critical systems, such as Ansys SCADE, for robust control software development., • Proven ability to work cross-functionally with software, power electronics, and system teams to support the integration of motion control designs., • Experience in implementing real-time control software on DSP and FPGA platforms. Location • Applicants must be willing and able to commute to magniX's location in Everett, Washington. Compensation & Benefits • 100% company-paid premiums for medical, dental, and vision insurance (for employees & dependents)., • 4 weeks paid vacation + 1-week annual end-of-year shutdown, sick time, and 11 paid holidays., • 401K retirement plan with industry leading 9.5% company contribution., • Company paid Life insurance, AD&D, Short-Term and Long-Term disability insurance, • Catered lunches and quarterly company fun-day events! Salary Range: $110k-$130k E-verify: magniX utilizes E-verify for employment eligibility verification Pre-employment Screenings: Employment with magniX is contingent upon satisfactory completion of pre-employment requirements including a background screen. EHS/Environmental Requirements: This job operates in a manufacturing and testing environment. While performing the duties of this job, the employee routinely is required to use hands to keyboard, communicate, listen to, and interpret instructions and remain stationary for extended periods of the time. This would require the ability to move around the facility and occasionally move/lift items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. Required PPE (Personal Protective Equipment) Required PPE provided by magniX based on the employee’s position and exposure. Below are typical PPE used on the manufacturing and testing floor. • Ear Plugs - Earmuffs, • Safety shoes This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” is required. A “U.S. Person” includes U.S. citizens, lawful permanent residents, refugees, or asylees. As this position requires access to export-controlled data, an appropriate export authorization by the U.S. Government may be required prior to such access. Employment, and the continuity of employment of non-U.S. persons, is contingent upon the company’s ability to secure and maintain the necessary export control authorization. Diversity and Inclusion magniX is an equal opportunity employer. We value and embrace diversity. We do not discriminate on the basis of race, color, national origin, religion, gender, gender identity or expression, sexual orientation, marital status, age, or disability status.

Job DescriptionSCADA/Controls Engineer SCADA/Controls Engineer Position Overview We are seeking a skilled SCADA/Controls Engineer to join our team. The ideal candidate will be responsible for designing, implementing, and maintaining SCADA systems and controls for various industrial applications. This role will focus on enhancing operational efficiency and system reliability through advanced automation solutions. Key Responsibilities • Design and implement SCADA systems for monitoring and control of industrial processes., • Develop and maintain Human-Machine Interface (HMI) applications to provide intuitive user experiences., • Collaborate with cross-functional teams to identify system requirements and ensure successful project delivery., • Troubleshoot and resolve issues with existing SCADA systems and associated controls., • Conduct system testing and validation to ensure compliance with industry standards and regulations., • Bachelor's degree in Electrical Engineering, Computer Science, or a related field., • Proven experience in SCADA system design and implementation, preferably with AVEVA software., • Strong knowledge of HMI development and integration., • Familiarity with PLC programming and industrial communication protocols. Stakeholders bonus (additional profit sharing) is typically between 4% and 8%. * Healthcare, Dental, Vision * Employee healthcare 100% paid * Dependents healthcare 50% paid * HRA/DRA/LPV Visa card for out of pocket expenses (helps offset copay and deductible) $3000 * $60 cell phone reimbursement * Spot bonus program on additional billable hours * 9 paid holidays • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 10/30/2024 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description JOB DESCRIPTION Job Title: Quality Engineer Department: Quality Reports to: Quality Manager Shift: 1st Position Purpose Under the guidance of the Quality Manager, a Quality Engineer will drive continuous improvement throughout the manufacturing system. They will utilize corrective and preventive actions to close gaps in the QMS and ensure the flow down of quality requirements to internal customers. Additionally, they will be the voice of quality within the organization and represent Vaupell for all assigned external customers. Essential Duties and responsibilities • Represent Vaupell in customer and supplier interactions (if applicable.), • Attend daily production meetings as required., • Direct new product validation & process qualification to establish controlled process, ensuring reliable product., • Perform Risk Analysis to assure product and process success., • Develop Control Plans., • Develop and provide training in QA related subjects for Quality and Manufacturing departments., • Evaluate and process RMA requests., • Develop and recommend inspection and sampling techniques, quality control plans or process procedures to meet the quality specification standards and provide associated training., • Perform quality audits covering in-house Quality Management System to ensure that conformance to requirements is met., • Be a resource for all departments within Vaupell., • Provide technical assistance to the Purchasing department in connection with the purchase of raw materials and supplies., • Responsible for following all established Vaupell policies, standard operating procedures and safety practices., • Generate FAI reports., • Evaluate and process RMA and NC requests., • Perform quality inspections of plastic aerospace parts with standard measuring equipment., • Bachelor’s degree in an applicable field or equivalent education plus work experience in a similar role., • 2+ years of relevant Quality experience., • Basic GD&T experience required., • ISO9001, AS9100 and AS9102 experience highly desirable as applicable, • ASQ certification is desirable., • Knowledgeable in plastics processing and manufacturing is desirable., • Demonstrated ability to read and interpret part drawings and standards., • Excellent computer skills, especially with Microsoft Office., • Ability to read, speak, understand, and follow instructions in English. Environmental Condition While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to fumes, airborne particles, and vibrations. The noise level in the work environment is usually moderate to occasionally loud. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements Required physical skills and abilities (see below) • A = 20% or less of work time, • B= 20 to 60% of work time, • C = 60% or more of work time, • Blank = Not applicable Standing B Bending at waist A Walking B Reaching below shoulder level A Sitting C Reaching above shoulder level A Lifting under 25 lbs. C Grasping C Lifting 25 to 50 lbs. A Handling C Lifting over 50 lbs. A Finger Dexterity C Carrying under 25 lbs. C Feeling C Carrying 25 to 50 lbs. A Eye-Hand coordination C Carrying over 50 lbs. A Eye-Hand-Foot coordination C Pushing under 25 lbs. C Hearing, ordinary C Pushing 25 to 50 lbs. A Hearing, other (explain below) Pushing over 50 lbs. A Seeing – near vision acuity C Climbing stairs A Seeing – far vision acuity Climbing ladders A Depth perception A Balancing A Color perception B Kneeling A Keyboarding C Crawling A Pulling A Turning/twisting A Other Vaupell reserves the right to change, modify or add to the Essential Duties and Responsibilities of any position at any time. Vaupell is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, belief and spirituality, gender, age, sexual orientation, gender identity or expression, ethnicity/national origin, pregnancy, genetic information, veteran, or disability status. Shift: Monday to Friday 12p-830p with training on day shift M-F 8a-430p

Job DescriptionWipro Givon USA has an exciting new opportunity for a Quality Engineer to join our team. This position analyzes manufacturing planning to determine compliance with customer-required specifications and evaluates outside suppliers to ensure that quality standards are in compliance. Company Benefits - Why work with Wipro Givon • Competitive Base Pay - 85,000 - 110,000/year DOE, • Excellent Health, Dental, and Vision options, • Paid Time Off and Company Paid Holidays, • Company Paid Life Insurance, • 401k with Company Match, • Supplement Insurance Options, • Bachelor's degree in Engineer and four years of Quality Engineering experience with the aerospace industry, • Strong computer skills required., • Must have a thorough knowledge of manufacturing processing, standard auditing procedures, and statistical process control., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedures., • Ability to use and interpret aerospace drawings and specifications., • Ability to write routine reports and business correspondence and communicate effectively with customers or employees of the organization., • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Ability to carry out instructions furnished in written, oral, or diagram form., • The ability to sit or stand for at least 8 hours a day., • The ability to occasionally required to walk; and stoop, crouch, or crawl., • The ability to regularly lift and/or move up to 10 pounds, and occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus., • Applicants must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.]Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Job Duties and Responsibilities - What will you do daily: • Conducts audits of manufacturing processes to ensure that all quality standards are fully documented., • Researches and verifies products returned from the customer., • Responsible for ensuring that all rework methods and criteria meet customer requirements and specifications and have been documented correctly., • Acts as a liaison between Quality, Production, and Manufacturing Engineering to determine appropriate corrective action for internal and external nonconforming products., • Evaluates corrective actions and trend analysis data in order to coordinate and implement appropriate preventive action., • Acts as a liaison with customer engineering and representatives as necessary., • Develops reports used for the analysis of required corrective action for circumstances where defect rates are excessive., • Ensures all manufacturing planning is completed in accordance with established procedures., • Approves outside suppliers of raw materials based on established criteria., • Prepares Quality Assurance operation instructions, procedures, policies, guidelines, and manuals., • Audits internal systems to determine the effectiveness of corrective action measures., • Implements calibration activities to obtain minimum variances., • Meets established standards for productivity and quality. Confers with supervisor when problems arise, which impact expected level of performance., • Responsible for supporting and ensuring compliance with ISO 9001/AS9100 Quality Management Systems., • Must contribute to a positive work environment., • Performs any task required to support customer requirements and company goals. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

Job DescriptionPosition Title: Senior OSP Engineer $88,861 to $113,035 annually DOE Comprehensive health benefits include - medical, dental, vision, 401k, flexible spending account, paid sick leave and paid time off, parental leave, quarterly performance bonus, training, career growth and education reimbursement programs. At Ziply Fiber, our mission is to elevate the connected lives of our communities every day. We are delivering the fastest home internet in the Northwest, with a focus on areas traditionally underserved by mainstream internet companies. And as our state-of-the-art fiber network expands in WA, OR, ID and MT, so does our need for team members who can help us grow and realize our goals. We may be building internet, but we are reaching real people. We strive to build relationships and provide customers and communities with refreshingly great experiences. We emphasize our values in all our interactions: Genuinely Caring: Our customers and colleagues are people, and quite possibly our neighbors. We put ourselves in their shoes and give them our full attention. Empowering You: We empower our customers to choose the products that best meet their needs, and we support our employees to implement solutions that elevate the experiences of our customers and coworkers. Innovation and Improvement: We always look for ways to make the experiences of our customers – and each other – better. Earning Your Trust: We earn trust by communicating simply and transparently as real people, not as a corporation. Job Summary The Senior OSP Engineer is responsible for the execution of projects created by the Planning department. This includes the oversight, extended planning analysis, budgeting and project timing, network growth, modernization, consolidation, and advancement needs in a fiber-focused business. The Senior OSP Engineer is the subject matter expert (SME) of Engineering for all technical aspects of outside plant facilities and associated work such as cable sizing, cable counts, cable records and permitting for ROW’s and easements. They ensure projects are progressing through the required programs in a timely manner and within the required budget for implementing the best network solution. This position works as a special point of contact (SPOC) with various Ziply Fiber departments, internal, external team members and vendor resources. Essential Duties and Responsibilities: The Essential Duties and Responsibilities listed below are a range of duties performed by the employee and not intended to reflect all duties performed. • Support leadership in reporting and escalations., • Provide guidance, support and training to internal FTE’s and external vendors., • Proactive review of outside plant facilities to determine necessary upgrades and enhancements., • Coordinate with all utilities for project design and construction to utilize joint trench., • Apply for all permits as required (State, DNR, City, County, Townships)., • Maintain and investigate ROW’s and easements for releases., • Communicate with all peers and departments to insure proper project planning., • Maintain accurate cable records and update according to As-Builts., • Attend pre construction meetings for project designs., • Prepare cost estimates for BDT’s., • Support sales, marketing, operations and regulatory as needed., • Perform other duties as required to support the business and evolving organization., • Mentor and train lower tier engineers to increase their technical ability and experience., • Must be available to work regular business hours Pacific Standard Time., • Must also be available to work on-call, evenings and weekends as needed., • Performs other duties as required to support the business and evolving organization. Qualifications: • High school diploma or GED required., • Must have and maintain a valid driver’s license, auto insurance, and satisfactory driving record. Knowledge, Skills, and Abilities: • Ability to manage multiple projects in various stages of activity and meet critical deadlines., • Ability to drive on behalf of the company in a safe and responsible manner. Work Authorization Applicants must be currently authorized to work in the US for any employer. Sponsorship is not available for this position. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining the physical condition necessary for bending, stooping, sitting, walking, or standing for prolonged periods of time; most of the time is spent sitting in a comfortable position with frequent opportunity to move about. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment Work is performed in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse, and multi-line telephone system. The work is primarily a modern office setting. At all times, Ziply Fiber must be your primary employer. Unless otherwise prohibited by law, employees may not hold outside employment nor be self-employed without obtaining approval in writing from Ziply Fiber. In holding outside employment or self-employment, employees should ensure that participation does not conflict with responsibilities to Ziply Fiber or its business interests. Diverse Workforce / EEO: Ziply Fiber is an equal opportunity employer. Ziply Fiber will consider all qualified candidates regardless of race, color, religion, national origin, gender, age, marital status, sexual orientation, veteran status, and the presence of a non-job-related handicap or disability or any other legally protected status. Ziply Fiber requires a pre-employment background check as conditions of employment. Ziply Fiber may require a pre-employment drug screening. Ziply Fiber is a drug free workplace.

Job Description About magniX Based in Washington state, magniX is a leader in electric propulsion for aerospace & defense, working to revolutionize how the world connects by transforming the way aircraft are powered. magniX has been at the leading edge of electric propulsion innovation for quite some time, proving our technology in flight. We are now ready to take our technology and products to market. Be part of a passionate team that is ushering in the 3rd era of aviation. About the Role The Electronics Hardware Engineer II is part of the Electrical and Electronics team responsible for hardware development for electronics systems. You will participate in all aspects of solution delivery including specification, design, prototyping, testing, certification, and manufacture. Primary Responsibilities: • Design, test, validate and certify high-power electronic hardware for aviation applications, both in the laboratory and on-site, to ensure compliance with DO-254 and DO-160G., • Perform circuit and/or system design, integration, and test at circuit board, enclosure, and system level., • Modelling and performing simulations using LTspice, Multisim, Matlab/Simulink and PCB layouts with Altium or other similar tools., • Setup and testing of motor/generator/inverter prototypes and high voltage battery management and control circuit prototypes including developing test procedures, measurement, and reporting., • Document life cycle data, detailed designs, design justifications, change management, and disposition of non-conformances., • Draft, review, and validate requirements to ensure compliance with aerospace development lifecycle processes. Qualifications Required: • BS degree or higher in electrical engineering, electronic engineering, power electronics, or related discipline, • 3+ years of relevant experience., • Mobile motor controller/inverter product design (full lifecycle) experience, ideally in the 600kW+ power range AND/OR full lifecycle high voltage battery management system product design experience, preferably for traction applications., • Demonstrated knowledge and use of power semiconductor devices in high voltage (>400V) power electronics products (Si MOSFET, Si IGBT, and SiC)., • Knowledge of EMI filter design and DC/DC converters., • In-depth understanding of voltage insulation testing and safety., • EMI/EMC compliance testing and power electronics or high voltage electronics certification. Preferred: • Experience in product development for aerospace or high voltage electric vehicle batteries is an advantage., • Experience with airborne systems certification requirements, guidelines, and testing (FAR Part 23 & 33, ASTM F39 & F44, RTCA DO-160G, DO-178C, DO-254), is preferred. Alternatively, experience with ISO26262 is acceptable., • Demonstrated ability working in cross functional technical teams, fostering collaboration and innovation., • Technical writing skills to create engineering documentation within a certification and quality framework. Location • Applicants must be willing and able to commute to magniX's location in Everett, Washington. Compensation & Benefits • 100% company-paid premiums for medical, dental, and vision insurance (for employees & dependents)., • 4 weeks paid vacation + 1-week annual end-of-year shutdown, sick time, and 11 paid holidays., • 401K retirement plan with industry leading 9.5% company contribution., • Company paid Life insurance, AD&D, Short-Term and Long-Term disability insurance, • Catered lunches and quarterly company fun-day events! Salary Range: $120k-$150k E-verify magniX utilizes E-verify for employment eligibility verification Pre-employment Screenings: Employment with magniX is contingent upon satisfactory completion of pre-employment requirements including a background screen. EHS/Environmental Requirements: This job operates in a manufacturing and testing environment. While performing the duties of this job, the employee routinely is required to use hands to keyboard, communicate, listen to, and interpret instructions and remain stationary for extended periods of the time. This would require the ability to move around the facility and occasionally move/lift items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. Required PPE (Personal Protective Equipment) Required PPE provided by magniX based on the employee’s position and exposure. Below are typical PPE used on the manufacturing and testing floor. • Ear Plugs - Earmuffs, • Safety shoes, • Safety Glasses - Safety Goggles Export Control Compliance This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” is required. A “U.S. Person” includes U.S. citizens, lawful permanent residents, refugees, or asylees. As this position requires access to export-controlled data, an appropriate export authorization by the U.S. Government may be required prior to such access. Employment, and the continuity of employment of non-U.S. persons, is contingent upon the company’s ability to secure and maintain the necessary export control authorization. Diversity and Inclusion magniX is an equal opportunity employer. We value and embrace diversity. We do not discriminate on the basis of race, color, national origin, religion, gender, gender identity or expression, sexual orientation, marital status, age, or disability status.

Job Description Sign-On Bonus: $5,000.00 Summary This position is responsible for leading assigned designs in the engineering department utilizing established modeling and design standards. The Design Engineer 5 will support design and development of engineering packages based on customer and OEM requirements for production, retrofit applications and product development. Essential Duties and Responsibilities include the following with other duties as assigned: • Assigned design tasks include but not limited to: basic aircraft electrical design, wiring installations, wiring diagrams, cable assemblies/harnesses, detailed assemblies and internal specifications., • Works under the direction of an engineering manager, maintains or modifies basic electronic/electrical system/subsystems based on defined requirements using approved processes and tools., • Participates in teams to support the development of designs. Supports the documentation of design implementation., • Obtain, interpret, and analyze OEM airplane install drawings using approved processes and tools., • Obtain, interpret, and analyze OEM airplane electrical design data., • Provides technical, design and informational support for airplane modifications (including full-time on-site modification support and on-call home-team support), manufacturing support and/or in-service issues., • Troubleshoots basic electronic/electrical system/subsystems problems., • Actively support engineering department goals and initiatives., • Coordinate with other departments as necessary., • Utilize internal drawing/document standards per customer or regulatory agency requirements., • Some domestic or international travel may be required., • Perform engineering design check and sign documents. With periodical technical Provides technical, design and informational support for complex production, product support or in-service issues. Effectively troubleshoots difficult, intermittent, chronic or complex system problems., • Perform analysis of engineering designs including but not limited to Electrical Load Analysis (ELA), System Safety Assessment (SSA), Transverse Separation Analysis (TVSA), etc., • Define and oversee Design Validation testing including but not limited to Engineering Functional Testing, EMI Ground/Flight Testing, etc., • Define engineering task scope (such as work scope validation) for design tasks., • Perform engineering design/analysis with minimum technical guidance., • Provide junior level mentoring and performance management input to PE/Functional Manager., • Perform engineering design approvals (design/approval authority) and task scheduling (such as detailed schedule of a given task per program requirements)., • Perform engineering design analysis and validation (such as engineering development testing, airplane and component functional test procedure, HALT, HASS, component qualification testing per RTCA/DO-160, etc)., • Perform engineering project scope review, project time estimates and project RFQ commitment, along with resources planning and assignments., • Act as design authority for design tasks., • Define engineer tasks for PE/functional manager. Supervisory Responsibilities This job may have some supervisory responsibilities when acting in the role of Lead Engineer and as delegated by the Functional Manager. Qualifications To perform this job successfully, an individual must be able to perform each essential duty to the established department standards (i.e. meet published metrics). The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All external hiring is contingent upon the successful completion of a pre-employment drug screen and a criminal background check. Jamco is passionate about providing a competitive and comprehensive benefits package and pleased to offer the following to eligible employees- • Medical Coverage, • Dental and Vision Reimbursement, • 401(k) Retirement Savings Plan, • Benefit Conversion at Termination, • Bereavement Leave, • Educational Assistance, • Family and Medical Leave, • Paid Parental Leave (40 hours) *Qualifying event after June 15th, 2022, • Flexible Benefit Plan (Flex Spending), • Holidays, • Jury Duty/Witness Service Leave, • Life Insurance, • Long-Term Disability, • Short-Term Disability, • Pregnancy Leave, • Paid Time Off (PTO), • Personal Leave, • Wedding Leave, • Wellness Program/Gym Reimbursement, • Pet Insurance

Job Description FLSA Status: Exempt Sign-On Bonus: $5,000.00 Summary This position is responsible for leading assigned designs in the engineering department utilizing established modeling and design standards. The Design Engineer 5 will support design and development of engineering packages based on customer and OEM requirements for production, retrofit applications and product development. Essential Duties and Responsibilities include the following with other duties as assigned: • Assigned design tasks include but not limited to: basic aircraft electrical design, wiring installations, wiring diagrams, cable assemblies/harnesses, detailed assemblies and internal specifications., • Works under the direction of an engineering manager, maintains or modifies basic electronic/electrical system/subsystems based on defined requirements using approved processes and tools., • Participates in teams to support the development of designs. Supports the documentation of design implementation., • Obtain, interpret, and analyze OEM airplane install drawings using approved processes and tools., • Obtain, interpret, and analyze OEM airplane electrical design data., • Provides technical, design and informational support for airplane modifications (including full-time on-site modification support and on-call home-team support), manufacturing support and/or in-service issues., • Troubleshoots basic electronic/electrical system/subsystems problems., • Actively support engineering department goals and initiatives., • Coordinate with other departments as necessary., • Utilize internal drawing/document standards per customer or regulatory agency requirements., • Some domestic or international travel may be required., • Perform engineering design check and sign documents. With periodical technical Provides technical, design and informational support for complex production, product support or in-service issues. Effectively troubleshoots difficult, intermittent, chronic or complex system problems., • Perform analysis of engineering designs including but not limited to Electrical Load Analysis (ELA), System Safety Assessment (SSA), Transverse Separation Analysis (TVSA), etc., • Define and oversee Design Validation testing including but not limited to Engineering Functional Testing, EMI Ground/Flight Testing, etc., • Define engineering task scope (such as work scope validation) for design tasks., • Perform engineering design/analysis with minimum technical guidance., • Provide junior level mentoring and performance management input to PE/Functional Manager., • Perform engineering design approvals (design/approval authority) and task scheduling (such as detailed schedule of a given task per program requirements)., • Perform engineering design analysis and validation (such as engineering development testing, airplane and component functional test procedure, HALT, HASS, component qualification testing per RTCA/DO-160, etc)., • Perform engineering project scope review, project time estimates and project RFQ commitment, along with resources planning and assignments., • Act as design authority for design tasks., • Define engineer tasks for PE/functional manager. Supervisory Responsibilities This job may have some supervisory responsibilities when acting in the role of Lead Engineer and as delegated by the Functional Manager. Qualifications To perform this job successfully, an individual must be able to perform each essential duty to the established department standards (i.e. meet published metrics). The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All external hiring is contingent upon the successful completion of a pre-employment drug screen and a criminal background check. Jamco is passionate about providing a competitive and comprehensive benefits package and pleased to offer the following to eligible employees- • Medical Coverage, • Dental and Vision Reimbursement, • 401(k) Retirement Savings Plan, • Benefit Conversion at Termination, • Bereavement Leave, • Educational Assistance, • Family and Medical Leave, • Paid Parental Leave (40 hours) *Qualifying event after June 15th, 2022, • Flexible Benefit Plan (Flex Spending), • Holidays, • Jury Duty/Witness Service Leave, • Life Insurance, • Long-Term Disability, • Short-Term Disability, • Pregnancy Leave, • Paid Time Off (PTO), • Personal Leave

Job Description FLSA Status:Exempt SUMMARY The project engineer is responsible for the delivery of the engineering group work product and, shall be the engineering contact focal for all project communication from internal and external customers and deliverables, after contract award. The project engineer shall be responsible for preparing, scheduling, leading and working with the engineering team to achieve the technical and program requirements successfully. The project engineer shall also be responsible to assure complete integration and maintain business relationships between the engineering team and all other internal customers, assuring the engineering work product meets all company goals. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following under supervision. Other duties may be assigned. • Engineering Focal for internal and external customers for technical matters, • Establish Tier 2 schedule based on Tier 1 schedule provided/updated by Program Manager and distribute it to all team member once updated., • Responsible to review and integrate all engineering teams Tier 3 schedules to support Tier 2 schedule., • Maintain up to date engineering work scope., • Responsible for complete aircraft modification engineering packages in accordance with established design standards and meeting the requirements of the program work scope, schedule and budget., • To identify or initiate any out of scope work to the respective Functional Managers and the Program Manager, • Responsible to assess and prepare all CIP to identify any changes to work statement or scope of work, as well as coordinate CIP approvals with the PM., • Lead respective engineering teams in developing solutions and completing each engineering designs based on defined requirements using approved processes and tools, • Lead of its respective group to assure proper integration/coordination to engineering designs between different functional engineering groups (EE/ME/Cert/Stress/Flam/Tech Pub/ Test Engineer/MFG Engineer) and the engineering aspect for stakeholders, • Identify all technical risks leading to schedule or cost impact to Program Manager and work around the risk in a timely manner if necessary., • Identify potential work stoppages according to discipline (EE/ME/Cert/Stress/Flam/Tech Pub/ Test Engineer/MFG Engineer) and escalate when not resolvable at project focal level, • Forecast project workload and assign appropriate resources., • Participate / Conduct meeting / Preparation for ITCM, PDR & CDR or any technical meeting with customer, • To lead the respective technical engineering groups (EE/ME/Cert/Stress/Flam/Test Engineer) deliverables and schedule. Functional Managers to be answerable to project deliverables and schedule, while holding functional managers accountable to project schedule, budget and deliverables., • Responsible for the substantiation documents in support of project design implementation as well as supporting the DSC to upload this data to Airbus, Boeing and/or airline customer as defined in the integrated schedule., • Understands and implements regulatory certification requirements into the design packages, • Responsible to fill up / update of all EAMR / CFE / BFE listing. PE to approve the EAMR / CFE / BFE listing, • Troubleshoots all engineering problems and finding solutions in completing project technical difficulties, • Managing of engineering hour’s consumption or allocation of hours to project technical will be responsible by respective Functional Managers., • Functional Managers to provide required resources in support of project with input from Project Leader (PM/PE/Lead)., • Identify item of parts with long lead time and/or find alternate parts as replacement and for filling up / updating of EAMR., • Developing and managing the project engineering drawing trees in collaboration with the lead engineers and engineering supervisors., • Oversee Engineering and Certification testing and direct Cert to arrange the test facility as well as coordinate getting the part to the test facility, • Responsible to provide project status reports and metrics in conjunction with agreed and published cadence to engineering and/or executive management., • Other duties as assigned QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. -Strong communication skills. -Professional and polished appearance and ability to establish and maintain internal and external customer relationships. -Ability to manage multiple tasks. -Team-player. -Strong verbal, written and interpersonal communication skills utilizing sound judgment and a "can do" attitude. -Proficient knowledge of Microsoft Office products. -May have Travel requirements with this position EDUCATION and/or EXPERIENCE BS degree Mechanical Engineering, Aerospace Engineering At least 8 years direct engineering experience with commercial aircraft interior modification STC projects must be familiar with aircraft survey, design experience related to installation of aircraft interiors and IFE and or structural modification. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Travel within the U.S. and abroad is required to support Jamco America programs. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Jamco is passionate about providing a competitive and comprehensive benefits package and pleased to offer the following to eligible employees- • Medical Coverage, • Dental and Vision Reimbursement, • 401(k) Retirement Savings Plan, • Benefit Conversion at Termination, • Bereavement Leave, • Educational Assistance, • Family and Medical Leave, • Paid Parental Leave (40 hours) *Qualifying event after June 15th, 2022, • Flexible Benefit Plan (Flex Spending), • Holidays, • Jury Duty/Witness Service Leave, • Life Insurance, • Long-Term Disability, • Short-Term Disability, • Pregnancy Leave, • Paid Time Off (PTO), • Personal Leave, • Wedding Leave, • Wellness Program/Gym Reimbursement, • Pet Insurance

Job DescriptionJob Title: Process Engineer Job Description The Surface Finishing Engineer is responsible for developing, implementing, and optimizing surface finishing processes such as anodizing, etching, plating, and coating to meet both cosmetic and functional requirements. This role involves working closely with cross-functional teams, suppliers, and customers to ensure high-quality finishes on metal and plastic components used in industries such as automotive, electronics, aerospace, and consumer goods. Responsibilities • Design and implement surface finishing processes (e.g., anodizing, plating, coating) for various materials., • Conduct practical demonstrations and trials of finishing techniques at customer or production sites., • Monitor and adjust finishing processes to ensure consistency, quality, and compliance with specifications., • Collaborate with design, manufacturing, and quality teams to meet product requirements., • Evaluate supplier capabilities and support process improvements to close production gaps., • Maintain and calibrate finishing equipment and ensure adherence to environmental and safety standards., • Document process parameters and results for quality control and continuous improvement., • Provide technical support and training to internal teams and external partners., • Travel to customer or manufacturing sites as needed.Essential Skills, • 5 years of experience in surface finishing operations such as anodizing, plating, or etching, with aerospace experience preferred., • Proficiency in quality check, quality assurance, process design, equipment operation, and data analysis., • Bachelor’s degree in Engineering, Chemistry, Materials Science, or a related field.Additional Skills & Qualifications, • Experience with advanced surface finishing techniques and processes., • Ability to work collaboratively with cross-functional teams and communicate effectively with suppliers and customers.Work Environment The work environment involves hands-on impact with direct support to aircraft and spacecraft projects. You will gain experience with cutting-edge finishing techniques used by top aerospace OEMs. The role offers opportunities for career growth with training, certifications, and advancement into leadership or specialized technical roles. You will collaborate with a team that values precision, safety, and continuous improvement. Enjoy a competitive package with comprehensive benefits, PTO, and performance-based incentives. Job Type & Location This is a Permanent position based out of Everett, WA. Pay and Benefits The pay range for this position is $60000.00 - $90000.00/yr. Medical, 401K, Dental, vision, PTO/ Vacation pay Workplace Type This is a fully onsite position in Everett,WA. Application Deadline This position is anticipated to close on Dec 5, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description SUMMARY We are seeking a Chief Engineer – System Integration to serve as the program-level authority for the integration of mechanical and electrical subsystems within munition development programs. This individual will take mission-level requirements and translate them into system requirements and boundaries, define subsystem allocations, and ensure that integration risks are identified and mitigated early. The Chief Engineer will have formal responsibility for sign-off of system-level requirements, interface control documents, and system-level testing, ensuring cohesive operation across all subsystems. This is a hands-on role in a small company environment, with direct engagement in architecture, interface definition, and test planning. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* WHAT YOU WILL DO • Translate program-level mission requirements into system requirements and allocate to subsystems., • Define system boundaries, interface requirements, and integration strategies for mechanical and electrical systems., • Oversee and coordinate subsystem development across multiple programs, ensuring alignment with system-level objectives., • Identify, track, and mitigate integration risks during design, build, and test phases., • Review, approve, and formally sign off on system-level requirements, interface control documents, and test results., • Lead cross-disciplinary technical discussions to resolve integration issues and maintain program schedule and performance., • Mentor subsystem engineers and other team members on integration principles and best practices., • Act as the authoritative point of contact for system integration issues both internally and with external partners. WHAT WE ARE LOOKING FOR • 15+ years of relevant experience in systems engineering, integration, and program-level oversight, preferably in missile or aerospace systems., • Hands-on experience with mechanical and electrical system integration; familiarity with avionics/software systems is a plus., • Proven experience deriving system requirements from mission-level objectives and allocating to subsystems., • Strong technical judgment, problem-solving, and risk management skills., • Prior roles such as Systems Engineer, Integration Lead, or Chief Engineer on complex programs are highly relevant., • Active security clearance required., • BS or MS in Mechanical, Electrical, Aerospace, or Systems Engineering (preferred but flexible based on experience). Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description About magniX: Based in the beautiful Pacific Northwest, magniX is a pioneer in electric propulsion and battery technology for the aerospace industry. We’re working to revolutionize how the world connects by transforming the way aircraft are powered. magniX has been at the leading edge of electric propulsion innovation for almost 20 years, and has successfully demonstrated our technology in flight. We are now on the path to take our proven technology and innovative products to market. Join us to be part of a passionate team that is ushering in a new era of aviation. About the role : As a Flight Test Engineer, you will be responsible for planning, executing, and analyzing flight tests of electric propulsion systems integrated into aircraft platforms. You’ll work closely with design, integration, and certification teams to ensure safe and effective testing aligned with FAA standards. Primary Responsibilities: • Support integration and testing of magniX’s electric powertrain products into flying test beds., • Plan and execute flight test campaigns, including instrumentation setup, data acquisition, and post-flight analysis., • Collaborate with DERs / DARs and FAA representatives to ensure regulatory compliance through experimental flight test programs., • Develop and maintain flight test plans, instructions, reports, and datasets within product lifecycle framework., • Design and manage instrumentation controls (calibrations, checkouts, filtering)., • Work cross-functionally with design, manufacturing, certification and test teams to define test articles and instrumentation., • Participate in flight test campaigns, flight test briefings, data review and assessment., • Responsible for test execution and coordination with the flight crew., • Responsible for maintaining test configuration control, weight and balance control and data control, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering or related field., • 3+ years of experience in aerospace testing, preferably with flight test exposure., • Familiarity with FAA regulations (FAR 23, 27 and 33) and certification processes., • Experience with LabVIEW, Python, and HBM Perception for data acquisition and analysis., • Experience with IADS based systems preferred Compensation & Benefits • 100% company-paid premiums for medical, dental, and vision insurance (for employees & dependents)., • 4 weeks paid vacation + 1-week annual end-of-year shutdown, sick time, and 11 paid holidays., • 401K retirement plan with industry leading 9.5% company contribution., • Company paid Life insurance, AD&D, Short-Term and Long-Term disability insurance E-Verify: magniX utilizes E-Verify for employment eligibility verification Pre-employment Screenings: Employment with magniX is contingent upon satisfactory completion of pre-employment requirements including a background screen. EHS/Environmental Requirements: This job operates in a manufacturing and testing environment. While performing the duties of this job, the employee routinely is required to use hands to keyboard, communicate, listen to, and interpret instructions and remain stationary for extended periods of time. This would require the ability to move around the facility and occasionally move/lift items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. Required PPE (Personal Protective Equipment): Required PPE provided by magniX based on the employee’s position and exposure. Below are typical PPE used on the manufacturing and testing floor: • Ear Plugs - Earmuffs, • Safety shoes Diversity and Inclusion: magniX is an equal opportunity employer. We value and embrace diversity. We do not discriminate on the basis of race, color, national origin, religion, gender, gender identity or expression, sexual orientation, marital status, age, or disability status.

Job Description Why You’ll Love Working Here At SimuTech Group, we are driving innovation and changing the world through the power of engineering simulation. Our growing team of energetic, tech-savvy professionals work hard every day to inspire our clients to push the boundaries of innovation and deliver transformational products. If you are motivated and driven by a culture where top-notch work ethic and passion are rewarded, then a career with SimuTech Group may be for you! The Benefits of Being Part of Our Team • Unmatched Health Coverage: Zero-cost in-network medical care with no premiums, deductibles, or copays for you and your family., • Complete Dental & Vision Benefits: 100% premium coverage for dental and vision insurance., • Be part of a dynamic and innovative team that thrives on solving complex challenges with cutting-edge engineering solutions., • Leverage your expertise in simulation software to make a tangible impact on client success and business growth., • Enjoy opportunities for professional development through diverse technical challenges, consulting, and training engagements. Deliver Expert Technical Support • Provide high-quality technical support for ANSYS software users, addressing queries via phone, email, and in-person interactions., • Collaborate with account managers to understand client needs, deliver engaging software demonstrations, and provide technical expertise throughout the sales process., • Provide software recommendations based on specific customer industry and use case., • Engage with clients to understand their analysis requirements and deliver tailored solutions., • Prepare detailed project scopes, cost estimates, and schedules for consulting engagements., • Work independently or within small groups to build, post process, and refine customer simulation models using ANSYS tools., • Lead training sessions for ANSYS software at client sites, online, and in SimuTech offices across the U.S. and Canada., • Deliver engaging, high-quality instruction to help participants gain a deep understanding of software applications and best practices. Education & Experience: • Bachelor’s degree in engineering; Master’s degree is a plus., • 0-3 years of experience., • Analytical Skills: A strong foundation in structural mechanics and numerical methods, backed by hands-on experience in engineering simulation., • Communication: Excellent communication skills, including technical writing, presentations, and client interactions., • Short Term Disability, • Long Term Disability, • 401k Plan with employer match, • Limited Flexible Spending Account, • Life Insurance, • Paid time off, • Professional development assistance, • Referral program, • Tuition reimbursement Location: West Coast Take the Next Step This is your opportunity to join a forward-thinking team where your skills, creativity, and ambition will be celebrated. Apply today to become a key player in SimuTech Group’s mission to revolutionize the engineering industry. SimuTech Group is an Equal Employment Opportunity Employer.

Job Description About magniX: Based in the beautiful Pacific Northwest, magniX is a pioneer in electric propulsion and battery technology for the aerospace industry. We’re working to revolutionize how the world connects by transforming the way aircraft are powered. magniX has been at the leading edge of electric propulsion innovation for almost 20 years, and has successfully demonstrated our technology in flight. We are now on the path to take our proven technology and innovative products to market. Join us to be part of a passionate team that is ushering in a new era of aviation. About the role : We are seeking a highly motivated and skilled Senior Mechanical Engineer to lead the design, development, and integration of electric motor and battery module systems for advanced electrified powertrains. The ideal candidate will have a strong background in mechanical design, thermal management, and structural analysis, with a focus on electric propulsion systems. Primary Responsibilities: • Lead mechanical design and analysis of electric propulsion components including electric motors, battery modules and their associated sub-assemblies and components, • Develop, optimize and validate electric motor assemblies and energy storage system sub-assemblies for performance, safety, and reliability., • Ownership of development packages, and delivery of these on time and on budget, • Collaborate with other departments through hardware design, validation, delivery and operation (Quality, Supply Chain, Manufacturing, Test), • Conduct structural and thermal simulations using FEA and CFD tools to validate designs., • Support prototype development, testing, and validation of mechanical systems., • Generate detailed engineering drawings, specifications, and documentation., • Participate in design reviews and contribute to continuous improvement initiatives., • Ensure compliance with industry standards, safety regulations, and company quality requirements., • Bachelor’s degree in mechanical or aerospace engineering., • 7+ years of relevant work experience, • Proficiency in 3D CAD (SolidWorks preferred) and PDM systems, • Strong understanding of GD&T: ASME Y14.5-2009 & ASME Y14.100-2013., • Experience in aerospace, automotive, or renewable energy sectors., • Knowledge of systems engineering and model-based design., • Experience with design for manufacturability (DFM) and design for assembly (DFA). Compensation & Benefits • 100% company-paid premiums for medical, dental, and vision insurance (for employees & dependents)., • 4 weeks paid vacation + 1-week annual end-of-year shutdown, sick time, and 11 paid holidays., • 401K retirement plan with industry leading 9.5% company contribution., • Company paid Life insurance, AD&D, Short-Term and Long-Term disability insurance E-Verify: magniX utilizes E-Verify for employment eligibility verification Pre-employment Screenings: Employment with magniX is contingent upon satisfactory completion of pre-employment requirements including a background screen. EHS/Environmental Requirements: This job operates in a manufacturing and testing environment. While performing the duties of this job, the employee routinely is required to use hands to keyboard, communicate, listen to, and interpret instructions and remain stationary for extended periods of time. This would require the ability to move around the facility and occasionally move/lift items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. Required PPE (Personal Protective Equipment): Required PPE provided by magniX based on the employee’s position and exposure. Below are typical PPE used on the manufacturing and testing floor: • Ear Plugs - Earmuffs, • Safety shoes Diversity and Inclusion: magniX is an equal opportunity employer. We value and embrace diversity. We do not discriminate on the basis of race, color, national origin, religion, gender, gender identity or expression, sexual orientation, marital status, age, or disability status.

Job DescriptionSummary A highly regarded mechanical contractor is seeking a Mechanical Engineer – Project Lead with extensive HVAC and plumbing design experience to support a diverse portfolio of construction projects across the Washington markets. This individual will serve as the primary engineering point of contact for clients, overseeing the design process from conceptual development through stamped contract documents. The ideal candidate is a licensed Professional Engineer in Washington State or would be an EIT working towards this licensure. 5+ years of mechanical design experience in both HVAC and Plumbing. This is an exciting opportunity for someone who thrives in a collaborative, fast-paced environment and wants to contribute to high-profile commercial, institutional, and industrial projects ranging from $100K to $10M+ in project scope. Key Responsibilities * Act as the primary mechanical design lead and client liaison for multiple construction projects simultaneously * Develop and oversee mechanical (HVAC and plumbing) systems from basis of design to fully engineered, stamped construction documents • Perform detailed load and sizing calculations for HVAC and plumbing systems Support business development efforts by contributing to proposals, qualifications packages, and participating in client interviews for new pursuits * Collaborate across delivery models including design-build, design-bid-build, MCCM, design assist, and progressive design-build * Provide technical oversight and support to internal design and construction teams * Continuously refine and improve internal templates, standards, and processes to increase design efficiency and accuracy * Support additional initiatives and duties as assigned by leadership Qualifications Required: • EIT licensing and pursuing Professional Licensing in state of WA 5+ years of mechanical (HVAC and plumbing) design experience * Strong working knowledge of mechanical codes, systems integration, and construction documentation * Ability to lead multiple concurrent projects with varying scopes, clients, and delivery methods Preferred: * Experience working in MEP firms or Design Build Mechanical contractor environment. * Familiarity with sustainable design practices and energy efficiency strategies * Proficiency with software tools such as AutoCAD, Revit, and energy modeling platforms What’s Offered * Competitive salary commensurate with experience * Comprehensive benefits including medical, dental, vision, and 401(k) * Paid time off and holiday schedule * Bonus potential based on performance and project milestones * Long-term career growth with a stable and well-established firm

Job Description SUMMARY The Development Engineer’s role is to develop, test, and deploy aerospace and defense mechanical products and systems as a member of a multi-disciplinary team. The primary focus of this position is the development, design verification testing, and demonstration of advanced technologies in support of military and aerospace programs. The Development Engineer III assists in all phases of a program including conceptual level design and analysis, proof-of-concept, prototype hardware design, fabrication, system testing, and full-scale system development. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Supports the engineering team while leading planning and execution of testing required for mechanical system development, • Assists in the completion of client goals on time, within budget and ensuring products conform to the highest standards of excellence in terms of accuracy, completeness, and presentation, • Leads in test planning and execution: test design and analysis; writing procedures, test plans, and test reports; data collection and reduction, • Supports business development and project performance efforts to meet customer needs, • Leads proposal efforts by effectively interacting with clients and internal technical staff to develop needs definition, proposal presentations, and project definition and reviews, • Passion for the aerospace industry and strong desire to lead in a fast-paced, hands-on environment, • Mentor and resource for more junior engineers WHAT WE ARE LOOKING FOR • B.S. or M.S. Degree in Mechanical or Aerospace Engineering, or equivalent in relevant experience and registration, • Typically possesses 4-7 years aerospace and/or defense experience, • Proven experience in leading product development tests, including, at a minimum, leading development testing and assisting in qualification testing., • Proficient in the use of data acquisition systems and instrumentation, • Solid understanding of multiple engineering technologies, • Knowledge of military and commercial specifications preferred, • Solid understanding of SolidWorks and Geometric Dimensioning and Tolerancing Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law.Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description SUMMARY The Proposal Lead Engineer supports the Business Development Team with the development of compliant proposals including implementation of capture strategies, and supports customer engagement related to product development. Reports to the VP, Strategy & Business Development. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Tuition Reimbursement* WHAT YOU WILL DO • Leads engineering teams with development of technical approach development, risk assessment, compliance matrices, hardware utilization matrices, and project plans (WBS) and costs, • Coordinates proposal reviews and closing of action items, • Handles complex proposals and ensures proposal compliance, • Aligns and uses Karman’s portfolio to meet customer requirements, • Engages in customer technical discussions and extend technical support to business development team, • Writes, compiles and manages all proposal documents, requirements, and checklists, • Develops business development documents including proposal templates, RFI responses, and customer presentations, • Implements Business Development team strategies to capture opportunities, • Responsible for proposal log tracking and on-time proposal submittal WHAT WE ARE LOOKING FOR • Preferred Education: B.S. in Mechanical or Aerospace Engineering, or related field, • Preferred Experience: 2+ years experience engineering at Systima or 5+ years engineering experience in space or defense industry., • Additional Preferred Experience:, • Experience managing teams and/or projects, • Experience with customer presentations, • Exposure to concept development, technology application, and program planning, • Ability to communicate effectively with both written and spoken forms, • Ability to develop, plan and execute programs, • Must be a U.S. citizen, • 10-20% Travel Required EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law.Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description SUMMARY The Design Engineer’s role is to conceptualize, design, develop, test, and support deployment of aerospace and flight worthy structures, mechanisms, mechanical products and systems. The primary focus of this position is design, with an emphasis on supporting new business development efforts. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry’s most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS • Medical, Dental, Vision, • Company Paid Life Insurance, • 401(k) Retirement Savings Plan, • Paid Time Off (PTO), • Paid Holidays, • Supports the mechanical engineering group in all aspects of design, • Conceptualize, design, and develop structures, mechanisms, and mechanical systems in accordance with customer requirements and customary standards, • Designate off-the-shelf mechanical component or systems, identify vendors who can supply them, and request their purchase in a manner timely with delivery requirements, • Create 2-D mechanical layout drawings and 3-D solid model conceptual drawings, • Perform basic required mechanical engineering calculations and analysis of designs to ensure their safe operation in meeting designated requirements, • Assist in design efforts of systems, owning design of sub-systems and components., • Document requirements for performance, compliance with customer requirements, plans, test procedures, test reports, and any other contractual specifications, • Review designs for cost, manufacturing, and quality assurance issues, • Create formal or informal engineering drawings, bill of materials, manufacturing system requirements, and inspection/quality assurance specifications in accordance with appropriate standards and specifications, • Support manufacturing, quality assurance, assembly, testing, and deployment of designs from concept to delivery. Provide technical support internally and externally, • Support proposal/presentation preparation and business development activities, • Support bench and field-testing of mechanical elements and systems, • Mentor and resource for more junior engineers WHAT WE ARE LOOKING FOR • B.S. or M.S. Degree in Mechanical or Aerospace Engineering, or equivalent in relevant experience and registration, • Typically possesses 2-5 years aerospace and/or defense experience, • Solid understanding of multiple engineering technologies, • Proven experience in designing robust hardware, • Detailed knowledge of design-based military and commercial specifications, • Proficient in SolidWorks, and experienced in Geometric Dimensioning and Tolerancing, • Knowledge of CAD/CAE tools relevant to mechanical systems design Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law.Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description JAMCO AMERICA, INC. FLSA Status: Exempt Sign-On Bonus: $5,000.00 Summary The Proposal Engineer is responsible for supporting the Sales and Engineering Departments. Coordinate proposal activities in conformance with customer needs create initial budget, preliminary Bill of Materials and Work Statement within company guidelines. Essential Duties and Responsibilities include the following with other duties as assigned: • Support Sales and Engineering departments by evaluating customer requests for various Jamco America revenue streams, Aircraft Modifications, OEM Products, Certification Services and Seats Products., • Evaluate customer needs, create initial budget, preliminary Bill of Materials and Work statement for basis of Commercial Proposal and Engineering work statement., • Define recurring kit cost budget, preliminary schedule and required travel requirements., • Support and coordinate with various departments within Jamco America including Mechanical and Electrical Engineering groups, Stress, Mechanical Systems, Certification, Flammability Testing and Technical Publications groups to develop, negotiate and finalize program budgets for each department., • Attend/participate in weekly status meetings with the sales and marketing team as well as Program Management team. This job has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All external hiring is contingent upon the successful completion of a pre-employment drug screen and a criminal background check. Requirements Education and/or Experience: Position requires completion of a Bachelor's degree in Mechanical Engineering field for job proficiency and 6 years related experience. Requires demonstrated experience in any of the following: 1) design or manufacture of aircraft interiors, 2) design or manufacture of aircraft modifications, 3) design or manufacture of aircraft products such as Galleys, Lavatories, Partitions, Class Dividers, PSU’s, Stowbins, IFE Systems etc. and 4) design of manufacture of seat products. It is desirable, but not required, that candidates have experience in quoting and estimating recurring engineering hours required to complete engineering assignments. Other desirable experience includes: knowledge of FAA and EASA aircraft and component level certification requirements and technical publications. Must display Advance skills in MS Office products and have the ability to learn other company software including Smarteam, Epicor and Industrios. Moderate travel within the U.S. and abroad may be required to support JAMCO America programs. Language Skill • Ability to read and interpret documents such a stately rules, operating and maintenance instructions and procedure manuals., • Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers of employees of organization. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Customer Orientation Must demonstrate concern and take actions to meet requirements and high standards of quality of both internal and external customers. Must display courtesy and sensitivity. Manage difficult situations. Meet commitments. Respond promptly to customer needs. Solicit customer feedback to improve service. Physical Demands While performing the duties of this job, the employee is frequently required to stand, walk, sit, talk and hear. Specific vision abilities required by this job include close vision. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet. Jamco is passionate about providing a competitive and comprehensive benefits package and pleased to offer the following to eligible employees- • Medical Coverage, • Dental and Vision Reimbursement, • 401(k) Retirement Savings Plan, • Benefit Conversion at Termination, • Bereavement Leave, • Educational Assistance, • Family and Medical Leave, • Paid Parental Leave (40 hours) *Qualifying event after June 15th, 2022, • Flexible Benefit Plan (Flex Spending), • Holidays, • Jury Duty/Witness Service Leave, • Life Insurance, • Long-Term Disability, • Short-Term Disability, • Pregnancy Leave, • Paid Time Off (PTO), • Personal Leave, • Wedding Leave, • Wellness Program/Gym Reimbursement, • Pet Insurance