Mechanical engineering jobs in Kansas City, KansasCreate job alerts

This job requisition provides candidates to the locations in the Louisville area. This job requisition is not location specific. Rate of Pay and Benefits: Inspectors Tooling and Layout are paid a top hourly base rate of $45.645, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $45.445 with pay increases to the top rate upon completion of three consecutive months of employment. Benefits: Immediate access to Best-in-Class Company provided healthcare! • Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision., • Basic Life Insurance and Accidental Death and Dismemberment Insurance., • Accident and Sickness and Extended Disability Benefits., • Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour., • Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status. Willingness and ability to work on any assigned schedule, change shifts, work more than 8 hours per day and/or work overtime, all while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures, to work in a team environment, treat co-workers with dignity and respect regardless of personal differences, and accept and follow instructions and requests from leadership. Ability and willingness to understand and follow instructions, both oral or in writing. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility. Candidates must have completed a bona fide Toolmaker apprenticeship or have 8 years of previous relevant work experience. Qualified individuals will possess knowledge and work experience in the following areas, which represent some of the critical aspects including, but not limited to the following: Troubleshoot & Repair: (23) Zeiss CMMs – electronic, mechanical, software, and programming (40+) Klingelnberg gear checkers – electronic, mechanical, arbors, software, and programming Marposs and Intra bench gauges – software and mechanical Mahr and Mitutoyo perthometers - mechanical Air and electronic bench gauges – software and mechanical Newage hardness testers Plant wide gauge bench computer issues before IT is called ITW’s In-line gauges – such as hones and grinders Build sort gauges from scratch using tools and parts in the lab Rebuild any and all types of gauges in the production departments Set up new gauges in the production departments Understand the mechanics of all gauges and masters and be able to re-set and master any gauge in the plant Operational knowledge of all measuring devices in the G&LO lab Ability to access and read blueprints to determine measurement characteristics Gauge Surveillance and Calibration: Perform yearly surveillance (visual inspection) & calibration (measurement verification) on all gauges Enter and retrieve gauge information into IQS gauge record database Layout: Write programs for Zeiss & Klingelnberg equipment Perform part measurements per blueprint and Engineering direction Ability to work with Engineers to conduct part evaluations Computer, Software, PC requirements: Perform CPU and hard drive installations on computerized gauge benches Perform backup images & restore hard drive images for computerized gauge benches Modify software programs for DCP changes Preventive Maintenance: Maintain measurement devices for Nagel hones, Reishauers, Klingelnbergs, Zeiss, Hommels, Intra and Marposs gauges Administrative / Computer tasks: Knowledge of Maximo & Drawing Management System GD&T - Geometric dimensioning and tolerancing Enter gauge repair diagnosis & solutions into every GR Maximo ticket Access and read blueprints to determine gauge replacement parts

Work Location: 9820 Leavenworth Rd, Kansas City, KS 66109 Job Overview: The Evening Controls Technician will assume advanced tasks relating to the production machines and will troubleshoot all electrical and Mechanical problems on equipment, including PLC controls. This position is responsible for analyzing equipment to troubleshoot problems and making any necessary repairs to electrical, mechanical or PLC programming changes related to production reliability. Our air-conditioned facility is just one way we support your wellness. We provide health insurance on day one of employment, paid time off and holidays, and your own company-funded well-being account that can be used in many ways to help you feel happy and healthy. *This position will train on the day shift for up to 2 months before transitioning into the evening shift. Work Schedule: Monday - Thursday (OT on Fridays as needed) • 4:00pm - 2:00am Highlights of your role:, • Observes functioning of installed equipment to detect hazards , problems and the need for service, repair and/or replacement of electrical and mechanical components., • Proficiently use ladder logic programming with experience in the Allen Bradley platform based programming, including RS Logix 500 and 5000., • Work efficiently with work order system (EAM) to document repairs and preventative maintenance throughout the plant., • Traces problems using electrical, electronic, pneumatic, and hydraulic components., • Discusses performance issues and improvement ideas with pertinent technical staff., • Maintains backups of programs from all electrical devices., • Checks newly installed equipment to evaluate system performance under actual operating conditions., • Use basic Servo Controls (open and closed loop systems) and set up variable frequency drive operations and parameters., • Perform basic motor operation and troubleshooting on Servo motors, brushed DC motors, and Induction motors., • Works closely with the Custom Equipment Process Group (CEPG) on machine improvements., • Will have the skills to properly use a digital multimeter., • Works closely with maintenance and is able to assist with troubleshooting electrical problems and able to provide PLC-support across the plant., • Concisely and accurately documents set-points and parameters for equipment. You're a good fit if you have (or if you can):, • 2-years experience in a closely related role is required, • Associate’s degree in a technical-related field is strongly preferred, • Must be able to obtain forklift and aerial platform licenses, • To perform this job successfully, an individual should have Enterprise Asset Management software experience and ability to utilize Microsoft Office Suite programs proficiently We invite you to See Yourself at Marvin: From people to products, Marvin is committed to creating better ways of living. When you join this family-owned and -led window and door company, you belong to a community full of opportunities. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities, • Brighter Days Fund – financial support from your colleagues and the Marvin family during personal hardships Join the more than 8,000 Marvin team members to experience these benefits and more. Apply today! Marvin is an Equal Opportunity Employer: Marvin is committed to creating an inclusive environment for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable laws. Applicants requiring reasonable accommodation for any part of the application and hiring process may contact us at _. Compensation: Starting at $27/hr, based on experience + $2 shift differential

Work Location: 9820 Leavenworth Rd, Kansas City, KS 66109 Job Overview: The Weekend Controls Technician will assume advanced tasks relating to the production machines and will troubleshoot all electrical and Mechanical problems on equipment, including PLC controls. This position is responsible for analyzing equipment to troubleshoot problems and making any necessary repairs to electrical, mechanical or PLC programming changes related to production reliability. Our air-conditioned facility is just one way we support your wellness. We provide health insurance on day one of employment, paid time off and holidays, and your own company-funded well-being account that can be used in many ways to help you feel happy and healthy. *This position will train on the day shift for up to 2 months before transitioning into the evening shift. Work Schedule: Friday - Sunday 6:00am - 6:00pm Highlights of your role: • Observes functioning of installed equipment to detect hazards , problems and the need for service, repair and/or replacement of electrical and mechanical components., • Proficiently use ladder logic programming with experience in the Allen Bradley platform based programming, including RS Logix 500 and 5000., • Work efficiently with work order system (EAM) to document repairs and preventative maintenance throughout the plant., • Traces problems using electrical, electronic, pneumatic, and hydraulic components., • Discusses performance issues and improvement ideas with pertinent technical staff., • Maintains backups of programs from all electrical devices., • Checks newly installed equipment to evaluate system performance under actual operating conditions., • Use basic Servo Controls (open and closed loop systems) and set up variable frequency drive operations and parameters., • Perform basic motor operation and troubleshooting on Servo motors, brushed DC motors, and Induction motors., • Works closely with the Custom Equipment Process Group (CEPG) on machine improvements., • Will have the skills to properly use a digital multimeter., • Works closely with maintenance and is able to assist with troubleshooting electrical problems and able to provide PLC-support across the plant., • Concisely and accurately documents set-points and parameters for equipment. You're a good fit if you have (or if you can):, • 2-years experience in a closely related role is required, • Associate’s degree in a technical-related field is strongly preferred, • Must be able to obtain forklift and aerial platform licenses, • To perform this job successfully, an individual should have Enterprise Asset Management software experience and ability to utilize Microsoft Office Suite programs proficiently We invite you to See Yourself at Marvin: From people to products, Marvin is committed to creating better ways of living. When you join this family-owned and -led window and door company, you belong to a community full of opportunities. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities, • Brighter Days Fund – financial support from your colleagues and the Marvin family during personal hardships Join the more than 8,000 Marvin team members to experience these benefits and more. Apply today! Marvin is an Equal Opportunity Employer: Marvin is committed to creating an inclusive environment for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable laws. Applicants requiring reasonable accommodation for any part of the application and hiring process may contact us at _. Compensation: Starting at $27/hr, based on experience + $3 shift differential

Job Overview: Diesel Mechanics are responsible for the maintenance and repair of diesel-powered vehicles. Their duties include running diagnostic tests on vehicles, test driving vehicles to gauge performance and maintaining detailed records of the vehicles they have serviced. We are looking for candidates with good attention to detail for the position of Light Diesel Mechanic. The primary duties include performing diagnostic tests on diesel vehicles to find faults, analyzing diagnostic test results, and repairing or replacing parts, including heating and cooling systems, air brakes and electrical system components. Servicing the vehicles, lube changes, filters, and tires. Schedule: • Evenings- Monday- Thursday- 3:30 pm to 1:30 am, overtime on Friday as required This job is located in Warroad, MN. If you need to relocate for this role, Marvin has a variety of benefit offerings to support your move. Highlights of your role: • Running diagnostic tests on vehicle., • Analyzing diagnostic test results., • Repairing or replacing braking systems., • Checking vehicle lighting systems., • Test driving vehicles to gauge performance., • Performing preventative maintenance on vehicles., • Maintaining detailed records of serviced vehicles., • Adhering to an inspection procedure checklist., • Maintaining a parts inventory., • Ensuring the cleanliness of the shop and your work area. You're a good fit if you have (or if you can):, • Degree or Diploma in Mechanical or Automotive Engineering is a plus, • ASE Diesel Certification advantageous, • Valid driver’s license, CDL or must be able to obtain one, • Aptitude for mathematics and science, • Advanced knowledge of diesel engine components, • Good IT and diagnostic skills, • Physically fit and able to lift up to 150 pounds, • Proficiency with maintenance and repair tools, • Attention to detail, • Good interpersonal skills, • Excellent verbal communication skills, • Good organization skills We invite you to See Yourself at Marvin: From people to products, Marvin is committed to creating better ways of living. When you join this family-owned and -led window and door company, you belong to a community full of opportunities. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities, • Brighter Days Fund – financial support from your colleagues and the Marvin family during personal hardships Join the more than 8,000 Marvin team members to experience these benefits and more. Apply today! Marvin is an Equal Opportunity Employer: Marvin is committed to creating an inclusive environment for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable laws. Applicants requiring reasonable accommodation for any part of the application and hiring process may contact us at _. Compensation: $24.00 - $32.00 per hour

ABM Industries is seeking Senior Field Service Technicians (NETA, NICET or equivalent experience) to join our Electrical Power Services team in Kansas City, MO. The Senior Technician will play a key role in insuring a safe and efficient installation & testing of electrical power distribution equipment for customers in the assigned territory. In this role, you will travel approximately 50% of the time, working both independently and with a crew, and handle the performance and management of routine, moderately complex, and complex tasks and projects, record-keeping, evaluation of test data, and preparation of field service reports. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit | ABM offers incentives such as sign on bonuses, relocation/temp housing assistance, commensurate with experience, take home company service vehicle & fuel card, local paid travel time and more. Position Summary Travel to customer sites to inspect, test, troubleshoot, perform start-up and collect data on electrical systems. Supervise Trainees, Assistants, and Technicians in the completion of electrical testing duties. Observe testing, assign work on projects to capable technicians, ensure testing of similar items is consistent across test technicians. Track project scope completion and communicate ABM and Customer Management. Maintain, test, repair, rebuild, and replace low, medium, and high-voltage switchgear and circuit breakers. Troubleshoot automatic transfer switches. Test and inspect low, medium, and high-voltage cable installations. Maintain, test, and repair transformers and related equipment. Test and calibrate solid-state and electromechanical relays. Perform relay calibration and power metering. Conduct low and medium-voltage motor control center and contractor testing. Start-up, troubleshoot, and repair generator controls and transfer schemes. Test and commission protection and control systems on high voltage substations. Sample and interpret insulated fluids. Complete Job Hazard Analyses including but not limited to arc-flash and shock analyses. Review and submit timecards, expense, and project reports. Document test results and complete field reports. Rotate emergency on-call duty. Maintain strict compliance with regulatory laws. Assist in the sales process acting as the technical expert in electrical testing and maintenance of electrical equipment. Qualifications Must have a minimum of 5 years experience in electrical testing. The candidate should have experience working with a team. Experience in working on projects. Familiar with NETA Acceptance and Maintenance Testing Standards. Familiar with NFPA70E Electrical Safety standards. Ability to troubleshoot electrical performance deficiencies. Ability to travel regionally 50%. Knowledgeable in lockout/tag-out and hazardous energy control procedures. Clean Driving Record and Drug-Free. Preferred Qualifications Familiar with NETA Acceptance and Maintenance Testing Standards. Hold a current NETA Level 2, 3, IV or NICET or equivalent/experience. About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

Job Description ZimZee Recruiting is looking for a Program Engineer for our avionics client in Wichita, KS. You will be serving as the primary technical liaison between customers, sales account managers, and engineering teams. This role is responsible for supporting new product development, product qualification, certification efforts, and aftermarket programs for aviation products including cockpit avionics, power conversion equipment, and battery systems. The ideal candidate combines strong engineering knowledge with exceptional project management, communication, and customer-facing skills to successfully drive programs from proposal through execution. Skills and Requirements • Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related engineering discipline, • Minimum of 2 years of engineering experience within the aviation or aerospace industry, • U.S. Citizenship required, • Strong program and project management skills with the ability to manage multiple priorities, • Experience with electrical and electromechanical systems or products, • Excellent verbal, written, and interpersonal communication skills with the ability to interact effectively with customers and cross-functional teams, • Strong analytical, problem-solving, and critical thinking abilities, • Highly organized with exceptional attention to detail and a results-oriented mindset, • Ability to interpret technical requirements and translate them into customer deliverables, • Preferred: Knowledge of aviation certification processes (Type Certificates and Supplemental Type Certificates) and industry standards such as RTCA/DO-160, DO-178, DO-254, MIL-STD-810, and MIL-STD-461 Key Responsibilities • Serve as the primary technical interface between engineering, sales account managers, and customers throughout the lifecycle of assigned programs, • Lead technical aspects of customer programs, ensuring project objectives are achieved within schedule, cost, and performance targets, • Develop, collect, consolidate, and communicate technical documentation and deliverables to satisfy customer requirements, • Support new business opportunities by reviewing proposal requirements, evaluating technical compliance, and collaborating with internal teams during the proposal process, • Coordinate closely with engineering project managers and cross-functional teams to monitor project progress and communicate status updates to customers and sales teams, • Provide product-level technical expertise on features, capabilities, qualifications, and certification requirements for aviation products, • \nCompany Description ZimZee Recruiting is a full-service recruiting and professional placement firm for both clients and candidates. We are located in Utah and serve both local and national needs. ZimZee Recruiting is passionate about recruiting, and our team members are focused, hardworking, and willing to go the extra mile to help fill a position or a new role for you. Our strong ethics and values provide an unmatched level of satisfaction for everyone involved with our team. Our business team is passionate, dedicated and highly motivated to tackle the daily challenges of a fast-growing technology company. We aim to constantly improve our sales and marketing processes to grow at a fast pace. ZimZee Recruiting is a full-service recruiting and professional placement firm for both clients and candidates. We are located in Utah and serve both local and national needs. ZimZee Recruiting is passionate about recruiting, and our team members are focused, hardworking, and willing to go the extra mile to help fill a position or a new role for you. Our strong ethics and values provide an unmatched level of satisfaction for everyone involved with our team.\r\n\r\nOur business team is passionate, dedicated and highly motivated to tackle the daily challenges of a fast-growing technology company. We aim to constantly improve our sales and marketing processes to grow at a fast pace.

Job Description Electrical Controls Engineer Full-Time | Kansas City, MO Travel: Up to 50% (including occasional extended trips) Position Overview Seeking an experienced Electrical Controls Engineer to support turnkey control system projects. This role involves collaborating with electrical engineers, drafters, mechanical engineering, field teams, and subcontractors to deliver high-quality, fully integrated control systems that meet customer specifications. Ideal for a hands-on engineer who can work independently, lead technical activities, and support projects from design through startup. Key Responsibilities Gather and interpret customer requirements, design criteria, and functional specifications. Develop detailed electrical control system designs, including hardware, software, and configuration documentation. Produce AutoCAD drawings, PLC code, system plans, and operational data. Coordinate material purchasing for fabrication and installation. Review and oversee subcontractor work related to control design and field wiring. Assist in creating project schedules for the electrical scope of work. Collaborate with mechanical engineering to ensure full system compatibility. Travel to job sites for coordination meetings, installation support, debugging, startup, and standby. Support shop operations, equipment testing, and troubleshooting as needed. Maintain and archive project files, drawings, and software upon project completion. Uphold internal standards, documentation requirements, and continuous improvement initiatives. Demonstrate strong teamwork, communication, and professionalism. Perform additional duties as required to support successful project execution. Qualifications Bachelor’s degree in a technical field (Engineering or related discipline). Strong ability to interpret specifications, drawings, and design documents. Hands-on experience with AutoCAD, PLC programming, and industrial control systems. Able to work independently and manage priorities effectively. Comfortable working in industrial plant environments and complying with site safety protocols. Strong communication, coordination, and leadership skills. Valid driver’s license and ability to pass jobsite-specific and international travel requirements. Must be able to obtain/maintain a U.S. Passport and pass required drug screenings. #M1 #LI-AH1 Ref: #275-Eng Kansas City

Job DescriptionStaff Mechanical Engineer - Pipeline & Facilities (Kansas City) DescriptionThe Staff Mechanical Engineer will work with the project team to create world-class designs for new projects, alterations, and redevelopments on a variety of natural gas facilities, including compressor stations, meter and regulator stations, and renewable natural gas facilities. The Staff Mechanical Engineer will work with the project team throughout the design and construction process, adapting mechanical plans according to budget constraints, design factors, or client needs. • Execution of mechanical engineering design and analysis for natural gas facilities and pipeline-related projects., • Mechanical design of stations and facilities, including piping systems and material specifications., • Preparation of calculations, studies, and technical reports, including pipe stress, pressure relief, and equipment sizing., • Development of P&IDs, piping plans, isometrics, equipment layouts, and associated bill of materials., • Selection and specification of mechanical equipment, including compressors, regulators, valves, meters, and relief devices., • Coordination with other disciplines (Pipeline, Civil/Structural, Electrical, Instrumentation & Controls, Environmental)., • Review of vendor submittals and technical bid evaluations., • Support construction activities, including responses to RFIs, field visits, and as-built documentation., • Assist in the preparation of proposals, scopes of work, cost estimates, and schedules., • Ensure compliance with applicable codes and standards, including ASME, API, and CFR requirements., • Participate in client meetings and coordinate with owners, contractors, and vendors., • Support process improvement, standard development, and quality control initiatives., • Support Business Development and Marketing initiatives., • All other duties as assigned.Qualifications, • Bachelor's Degree in Mechanical Engineering or related degree from an ABET-accredited program, and 3 years of mechanical engineering experience required. Consulting preferred., • Or Bachelor's Degree in Mechanical or related Engineering Technology from an ABET-accredited program, successful completion of the Fundamentals of Engineering (FE) exam, and 3 years of mechanical engineering experience required. Consulting preferred., • Or a Master's Degree in Mechanical Engineering and 2 years of mechanical engineering experience required. Consulting preferred., • Working knowledge of applicable codes and standards, such as ASME B31.3, B31.4, B31.8, API 520/521, and 49 CFR Part 192, is preferred., • Experience with mechanical design software and engineering tools., • Strong knowledge of standard engineering techniques and procedures., • Excellent written and verbal communication skills., • Ability to work methodically and analytically in a quantitative problem-solving environment, and demonstrated critical thinking skills., • Proficient in standard engineering techniques and procedures., • Strong computer skills (e.g., Microsoft Office Suite)., • Strong computer skills include AutoCAD, BIM (Revit), 3D Rendering Programs, hydraulic analysis, and HVAC analysis programs., • Strong attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills., • Engineers in Training (EIT) Certification preferred.Primary Location: US-MO-Kansas CityTravel: Yes, 15 % of the Time

Job DescriptionStaff Mechanical Engineer – Pipeline & Facilities (Kansas City, MO)Full-Time · Permanent · Competitive Pay & Full Benefits · ~15% TravelJoin a high-performing engineering team delivering worldclass designs for natural gas infrastructure projects. This role supports new builds, upgrades, and redevelopment work across compressor stations, meter & regulator stations, and renewable natural gas facilities.About the RoleAs a Staff Mechanical Engineer, you will collaborate across disciplines to execute mechanical engineering design, analysis, and technical deliverables throughout the full project lifecycle—from initial concept through construction support.Key Responsibilities • Design and analysis of mechanical systems for natural gas facilities and pipeline-related projects, • Mechanical layout and design of stations and facilities, including piping systems and materials, • Prepare calculations, studies, and technical reports (pipe stress, pressure relief, equipment sizing), • Develop P&IDs, piping plans, isometrics, equipment layouts, and bill of materials, • Select and specify equipment such as compressors, regulators, valves, meters, and relief devices, • Coordinate with Pipeline, Civil/Structural, Electrical, I&C, Environmental, and other disciplines, • Review vendor submittals and perform technical bid evaluations, • Support construction through RFIs, field visits, and as-built documentation, • Assist with proposals, scopes of work, estimates, and schedules, • Ensure compliance with ASME, API, CFR, and other applicable codes and standards, • Participate in client and contractor meetings, • Support process improvement, standard development, and QA/QC initiatives, • Contribute to business development and marketing efforts, • Perform other duties as assignedQualifications Bachelor’s Degree in Mechanical Engineering (ABET-accredited) and 3+ years mechanical engineering experience — OR Engineering Technology degree + FE/EIT + 3 years experience — OR Master’s in Mechanical Engineering + 2 years experiencePreferred skills & experience: • Familiarity with ASME B31.3, B31.4, B31.8, API 520/521, 49 CFR Part 192, • Experience with mechanical design tools and engineering software, • Strong mechanical design fundamentals, • Excellent communication skills, • Strong analytical and problemsolving mindset, • Proficiency with AutoCAD, Revit/BIM, 3D modeling tools, hydraulic analysis, HVAC analysis programs, • EIT certification preferredLocation & Travel Kansas City, MO (Onsite) Approx. 15% travelCompensation & Benefits • Competitive salary based on experience, • Full benefits package (health, dental, vision, retirement, PTO), • Career growth opportunities within a multidisciplinary engineering environment

Job DescriptionDo you believe no challenge is too complex to solve? You’ll fit right in at U.S. Engineering. We deliver award-winning mechanical contracting, construction, service, and maintenance solutions with a focus on performance and innovation. Our team of skilled and collaborative professionals drives every project from preconstruction through final testing, always aligned with our clients’ goals. Systems Support Specialist The Systems Support Specialist serves as the first point of contact for technical support needs, providing prompt, effective assistance to team members. Troubleshoot and resolve issues related to hardware, software, network access, and other systems, or escalate when necessary—always with a strong focus on service, accuracy, and user experience. Principal Duties and Accountabilities: • Provide customer solution consulting to team members in all regions through a variety of communication channels (email, phone, chat, face-to-face)., • Troubleshoot, diagnose, and resolve help desk tickets in a team-orientated environment, collaborating with the IT team and escalating as appropriate., • Provide solutions proactively to IT leadership in concert with ticket escalation., • Complete documentation in the helpdesk ticketing system on all work performed., • Develop & maintain expert level knowledge of US Engineering systems and processes., • Support process compliance., • Install and configure software or hardware updates or patches., • Evaluate and resolve network connectivity or communications systems issues., • Ensure systems and workstations are compliant with organizational policies and security standards., • Set up and deploy new user workstations, cell phones, iPads and accounts., • Assist with asset tracking as well as inventory procurement and management.Education:, • High School Diploma or equivalent required., • Bachelor’s degree in computer systems / information technology or equivalent preferred.Experience:, • 3-5 years’ desktop support experience in a Microsoft Enterprise environment with 100+ employees., • Experience in mechanical, specialty trades contractors, or large general construction industry is a plus.Training:, • Advanced knowledge of Microsoft Windows (latest version), training/certification preferred., • Intermediate knowledge of MS Office365, iOS and Android OS are required., • General awareness of common technology equipment used by U.S. Engineering., • Working knowledge of IT infrastructure. Knowledge, skills, and abilities: Knowledge • Familiarity with network-based systems such as Microsoft Exchange, Active Directory, and application license managers, • Understanding of hardware components including printers, copiers, plotters, PCs, iPads, and mobile devices, • Working knowledge of commonly used software applications: Microsoft Office, Edge, Chrome, Bluebeam, Autodesk, Trimble, and Procore, • Understanding of components and functions within LAN/WAN environmentsSkills, • Strong professionalism and customer service orientation, • Clear and effective verbal and written communication, • Solid troubleshooting and documentation skills, • Strong interpersonal, organizational, and collaborative skills, • Ability to work independently while also contributing to team effortsAbilities, • Communicate effectively with both IT team members and non-technical users, • Manage customer expectations with clarity and professionalism, • Prioritize and handle multiple support tickets while maintaining composure under pressure, • Own the resolution process and follow through to ensure timely and accurate solutions, • Present technical information clearly to groups of varying technical backgrounds, • Build and maintain strong working relationships across departments, • Deliver user support and training for standard equipment and common applications, • Remain detail-oriented and results-focused in fast-paced environments, • Demonstrate initiative in professional development and continuous learning, • Safely provide technical support on the production floor or at job sites as needed, • Explain complex technical concepts in plain, accessible language, • Collaborate on inventory management: track orders, organize suppliesPhysical and/or Travel Demands, • Work outside of normal business hours as required to maintain customer satisfaction., • Frequent use of computers, including keyboard, viewing monitor for extended periods of time, physically moving throughout the office, jobsite trailer, or work area with infrequent use of a ladder or extended kneeling, crawling, etc. to complete IT related network cabling, equipment installation, and troubleshooting., • Frequent lifting, bending, stooping, reaching while handling computer equipment., • Travel as required to conferences and continuing education., • Occasional day trips between construction job sites, offices and manufacturing facilities.Benefits and Compensation:, • The range for this position has been established at $28 to $40 hourly and is U.S. Engineering’s good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be based on a variety of factors, including but not limited to internal equity, experience, education, specialty, and training., • Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package, including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line. This position will be posted until August 31st 2026 To apply, please visit https://www.usengineering.com/careers/job-postings/. Candidates must be legally authorized to work in the United States on a full-time basis without requiring future sponsorship for employment visa status. U.S. Engineering is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities and job specifications required of employees so classified. U.S. Engineering reserves the right to revise as needed. The job description does not constitute a written or implied contract of employment. Powered by JazzHR ADoIGP21oB

Job Description Pay: $17.00 - $19.00 per hour Job description: Overnight Maintenance Job Description Job Title: Maintenance Engineer Department: Engineering Reports To: Chief Engineer FLSA Status: Non Exempt MUST BE ABLE TO WORK 3RD SHIFT Summary: Responsible for painting, drop ceiling tile repair, monitoring fire panels, small toilet repair, light bulb changing . also some security work as needed. by performing the following duties. shift monday -thursday 11:00 pm to 07:30 am. over night shift Duties and Responsibilities include the following. Other duties may be assigned. 1. Performs scheduled preventive maintenance tasks, such as checking, cleaning, or repairing equipment, to detect and prevent problems.*, 2. Examines work orders and converses with equipment operators to detect equipment problems and to ascertain whether mechanical or human errors contributed to the problems.*, 3. Sets up and tests industrial equipment to ensure that it functions properly.*, 4. Operates equipment to demonstrate proper use or to analyze malfunctions.*, 5. Tests faulty equipment to diagnose malfunctions, using test equipment or software, and applying knowledge of the functional operation of electronic units and systems.*, 6. Repairs or adjusts equipment, machines, or defective components, replacing worn parts, such as gaskets or seals in watertight electrical equipment.*, 7. Calibrates testing instruments and installed or repaired equipment to prescribed specifications.*, 8. Advises management regarding customer satisfaction, product performance, or suggestions for product improvements.*, 9. Inspects components of industrial equipment for accurate assembly and installation or for defects, such as loose connections or frayed wires.*, 10. Studies blueprints, schematics, manuals, or other specifications to determine installation procedures.*, 11. Maintains equipment logs that record performance problems, repairs, calibrations, or tests.*, 12. Coordinates efforts with other workers involved in installing or maintaining equipment or components.*, 13. Consults with customers, supervisors, or engineers to plan layout of equipment or to resolve problems in system operation or maintenance.*, 14. Sends defective units to the manufacturer or to a specialized repair shop for repair.*, 15. Installs repaired equipment in various settings, such as industrial or military establishments.*, 16. Determines feasibility of using standardized equipment or develops specifications for equipment required to perform additional functions.*, 17. Enters information into computer to copy program or to draw, modify, or store schematics, applying knowledge of software package used.*, 18. Develops or modifies industrial electronic devices, circuits, or equipment, according to available specifications.* Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Math Ability: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills: To perform this job successfully, an individual should have knowledge of order processing systems, word processing, spreadsheet, design, internet, and inventory software. Education/Experience: Bachelor's degree (B.A./B.S.) from four-year college or university; or six to eight years related experience and/or training; or equivalent combination of education and experience. Specialized Training: · Electrical Certificates and Licenses: · Electrical Equipment: · Voltage detectors · Test lamps Knowledge, Skills, and Other Abilities: · Communication · Time management Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, use hands, reach with hands and arms, climb or balance, stoop, kneel, crouch or crawl, and talk or hear. The employee is occasionally required to sit, and taste or smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include depth perception. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to wet or humid conditions (non-weather), work near moving mechanical parts, work in high, precarious places, fumes or airborne particles, outdoor weather conditions, extreme cold (non-weather), extreme heat (non-weather), risk of electrical shock, and vibration. The noise level in the work environment is usually moderate. Job Type: Part-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • Health savings account, • Paid time off, • Vision insurance Experience: • Maintenance: 1 year (Preferred) License/Certification: • Driver's License (Preferred) Ability to Commute: • Kansas City, MO 64153 (Required) Ability to Relocate: • Kansas City, MO 64153: Relocate before starting work (Required)

Job DescriptionElectrical Engineer / Designer | Kansas City, MO | Join a collaborative MEP engineering team and take on meaningful electrical design work across commercial, retail, residential, education, and entertainment projects. This role offers the opportunity to work independently on complex designs, collaborate with multidisciplinary teams, interact directly with clients, and grow into a key technical resource. What You’ll Do • Design electrical systems, perform calculations, and develop layouts, drawings, and schematics., • Coordinate designs with architectural, mechanical, plumbing, BIM, and project management teams., • Research equipment and systems and recommend effective, practical solutions., • Participate in client meetings, site surveys, inspections, and project coordination., • Support project delivery, quality control, scheduling, and client communication., • Mentor and assist team members while contributing to continuous technical improvement.What You Bring, • Bachelor’s degree in Electrical or Architectural Engineering preferred, with 8+ years of relevant experience., • PE license preferred., • Strong electrical engineering design and calculation skills., • Intermediate proficiency in Revit and Bluebeam Revu., • Strong understanding of local building codes and their application to electrical design., • Working knowledge of how electrical systems integrate with structural, mechanical, and plumbing systems., • Strong communication, problem-solving, and collaboration skills.Why Consider This Opportunity? Enjoy a flexible, collaborative environment with the opportunity to work on diverse projects, engage with clients, contribute to innovative designs, and grow as a technical leader. Please send a current copy of your resume with work history to for consideration. All communications are 100% confidential. Sean Toy Libertyjobs.com #libertyjobs #MEP #midsenior #electrical \nCompany Description Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists. Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job DescriptionDo you believe no challenge is too complex to solve? You’ll fit right in at U.S. Engineering Innovations. We deliver award-winning mechanical contracting, construction, service, and maintenance solutions with a focus on performance and innovation. Our team of skilled and collaborative professionals drives every project from preconstruction through final testing, always aligned with our clients’ goals. Primary Purpose: Responsible for advanced estimating activities for assigned regional projects, including bid preparation, final bid tabulation, and client relationship management. Principal Duties and Accountabilities: • Accurate preparation of HVAC, plumbing, piping and sheet metal estimates – including hard bid and conceptual., • Advanced ability to review proposal specifications and drawings to determine scope of work and required contents of estimate. Develop a bid “checklist” for each bid., • Maintain files of working documents as back-up for estimate figures, including current accurate information on prices from suppliers through direct contact, sales brochures, price lists, etc., • Coordinate bid preparation and final closeout for hard bids., • Participate in pre-bid meetings and assist team in the development of bid strategy to win projects., • Collaborate with project development and operation team on proposals., • Assist Preconstruction Services team with conceptual estimates., • Serve as contact to outside vendors, suppliers, and subcontractors during bid preparation., • Build and maintain effective relationships with client counterparts., • Responsible for layout and takeoff of incomplete drawings., • Participate in project meetings with Estimating team and management as appropriate., • Manage acquisition and return of bidding documents., • Client relationship management as required, including client-sponsored functions., • Partner with regional, project and estimating management on constructability review, workforce requirements, schedule, and other trade impacts., • Work directly with Bid Coordinator regarding distribution of bid information and receiving of quotes.Education & Experience:, • High School Diploma / GED required., • Prefer degree in Engineering or Construction Management; equivalent combinations of technical training, trade school and relative experience., • Minimum of 3-5 years’ experience in full mechanical (HVAC, piping, and plumbing) estimating., • Experience working with QuickPen, Autobid, Quote Express mechanical or similar software preferred., • Prefer broad industry experience with HVAC and plumbing – including commercial, institutional, and industrial. Knowledge, skills, and abilities:, • Advanced knowledge of estimating techniques and cost control., • Advanced technical knowledge of mechanical construction, HVAC, piping, plumbing, etc., • Advanced technical knowledge of general and mechanical construction to interpret all project documents and the impact it will have on estimate., • Ability to interpret computerized cost data and systems., • Ability to be self-sufficient and work under minimal supervision. Must be capable of facilitating a bid process through its completion., • Excellent verbal and written communication skills., • Keen attention to detail / accuracy., • Proficiency with computers and estimating software., • Ability to use discretion and make experienced judgments on relative significance of bid components. Keen understanding of terms and conditions that impact bid strategy., • Must work in a collaborative team environment and ability to enthusiastically represent the company’s core values, mission, history, and culture., • Operate with a strong sense of urgency and work with proficiency to deliver results., • Strong analytical skills combined with resourcefulness to find all routes to the most effective results., • Proficiency in Microsoft Excel, Bluebeam and Procore.Benefits and Compensation:, • The range for this position has been established at $64,360 - $91,756 per year and is US Engineering’s good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty, and training., • Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line.This position will be posted until July 30, 2026. To apply, please visit https://www.usengineering.com/careers/job-postings/. Physical and/or travel demands: • Occasional travel to regional offices may be required., • This position is primarily performed in an office setting, which includes regular sitting, use of computer keyboard and monitor, and telephone. Occasional bending, kneeling, standing, and walking, and lifting of light objects required. Candidates must be legally authorized to work in the United States on a full-time basis without requiring future sponsorship for employment visa status. U.S. Engineering is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities and job specifications required of employees so classified. U.S. Engineering reserves the right to revise as needed. The job description does not constitute a written or implied contract of employment. #IND Powered by JazzHR eUZSJDr7I9

Job DescriptionNPI ManagerAre you interested in both device design and manufacturing? Easily bored by the repetitive, but excited by unique challenges? Our NPI team is a collection of prototype specialists, manufacturing engineers, technicians, material managers and others who understand medical device production controls. We have an opportunity for a full-time position in the Kansas City metro, leading the design-to-production handoff for medical devices and other technology systems, from hands-on prototype builds through new manufacturing setup at contract manufacturers. Potential growth path to director, general manager and beyond. From establishing production forecasts and managing materials, to making and qualifying plastic tooling. Creating manufacturing plans, establishing production and test process, qualifying equipment and validating production processes along the way. NPI is a lot of work, and our NPI team does anything it takes to get clients to market, with so much more urgency than a standard contract manufacturer. Company overviewFounded in 2013, Engenious Design is a growing team of 90+ people who design, prototype, build and test medical devices and other high technology systems for our clients. We don’t make or sell anything with our name on it, but we work on behalf of our customers who market and sell the systems we design. We are a blend of Creative Design mixed with Engineering - Industrial Designers, Graphic Designers, Mechanical/Electrical/Embedded Software Engineers. We design, prototype and test electro-mechanical systems in a collaborative team that’s based in the Kansas City metro area. Our prototype model shop and short-run production areas are well-outfitted, clean, organized and air-conditioned. Our model shop creates photo-worthy appearance models (like movie props) and functional prototypes to support R&D work that makes the world better through the systems we design. Our production team produces limited quantity, high-quality final assembly and test of medical devices and other technology systems in an electronics lab environment. Position summaryThe hands-on NPI Manager oversees all aspects of in-house prototype and manufacturing builds for medical devices and other technology systems, working alongside design engineers from early design reviews through pilot production at Engenious and design transfer to contract manufacturers. The scope of work includes planning and building components, subassemblies, fixtures, prototypes, pilot production runs, and finished device production (short run). Builds require leading and directly managing the day-to-day activities of highly skilled teams in a safe, organized and controlled environment. This individual manages both processes and personnel. The NPI team reviews designs early for manufacturability and assembly, feeding that input back to design engineers before a design locks, then leads the transfer of the finished design into a new manufacturing setup at contract manufacturers. They manage inventory, tools, equipment and people for on-schedule, within-budget execution of all NPI group work, and maintain and improve business and quality system processes that meet FDA and ISO standards. The manager coordinates with clients, suppliers, and engineering at a leadership level, establishes supplier quality agreements, and maintains the safety of all who work in the production areas. Required skills to have for the success of this role • Minimum 3 years of experience directly managing a team in an NPI, prototype, or manufacturing environment, ideally for medical devices or another regulated industry., • Minimum 2 years of experience leading design transfer to contract manufacturers, including standing up new manufacturing processes and production lines., • Experience partnering with design engineers on manufacturability, tolerancing and assembly feedback during product development., • Minimum 2 years of experience estimating and managing project work to schedule and budget., • Must have experience managing supplier relationships, including supplier quality agreements and corrective actions., • Degree in a relevant engineering background (e.g Manufacturing, Biomedical, Mechanical, Electrical, Software), or equivalant experience. Nice to Haves, • Experience with lean process (Toyota Production System) or equivalent continuous improvement methods., • Background in mechanical, manufacturing or electrical engineering, or equivalent hands-on experience., • Working knowledge of FDA and ISO quality system requirements, including design controls and audit readiness., • Experience with electro-mechanical or electronics assembly for medical devices. Powered by JazzHR NTmEA14w5L

Job Description Data Center Engineering Design Manager - Kansas City, MO This opportunity is with a leading provider of mission-critical data center solutions as a Managed Services Provider as an Owner's Rep for Construction Services. This firm provides a complete life cycle of solutions that are custom-fit to the requirements of their client's mission-critical facilities. This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. They build mission-critical facilities for data center facilities nationwide for Enterprise, Colocation and Hyperscale Companies. This challenging and unique role will involve directing the design of Critical Power Systems and HVAC / Cooling / Mechanical Equipment for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of heating and cooling load calculations, ductwork and piping sizing, selecting HVAC equipment, energy modeling and other engineering calculations and Electrical Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems and electrical switchgear is a must. Our ideal candidate will lead and manage the design of critical and high-impact components of systems. Collaborate cross-functionally with multiple teams, ensuring consistency in architectural principles and promoting best practices. Identify and evaluate emerging technologies and trends, proposing innovative solutions to enhance applications. Drive continuous improvement initiatives, implementing processes and tools to enhance engineering efficiency. You will lead the design team and working / communicating with all the trades and stakeholders involved in all projects. Working and communicating with internal team and clients effectively is a must. Need to have come up the ranks as consulting engineer to be considered. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical and mechanical engineering design role for small to medium sized data center facility design projects., • Create Conceptual Designs gathered from meetings, • Ability to manage multiple projects; Champion design reports; Produce engineering proposals (RFPs); Facilitate client meetings / presentations that meet the company's / project's objectives, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies ; Put these in clear concise work statement for the field, • Review drawings and specifications, participate in equipment selection and provide input to the design team where needed. Provide ‘peer review' as needed, • Represent the Operations team in startup, testing, factory witness testing, commissioning, and turnover. Support the commissioning manager as needed, • Ensure that the design and construction are done with operability and maintainability in mind, • Develop guidelines and standards for operational processes. Provide input to the development of design standards, • Track progress of projects against goals, objectives, timelines, and budgets, • Develop and administer an ‘Operations and Maintenance' audit program, • Lead After-Action Reviews and ensure that the lessons learned are incorporated into the policies, • Provide Subject Matter Expertise on critical systems maintenance and operations. Assist with troubleshooting issues as needed, • Provide onsite support during major maintenance activities if needed, • Ensure proper procedures are written and reviewed before such activities, • Ability to manage a team of engineers and technical staff Qualifications: • 5-10 + years experience, • Bachelor's Degree in Mechanical / Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Previously have worked at an Engineering Consulting firm a MUST, • Experience with hyperscale or colo data center design, • Must have experience managing an engineering design team, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience with Electrical Systems such as UPS (Uninterruptible Power Supply), Generators, Switchgears, and Batteries a MUST, • Experience working on complex data center/mission critical facilities design projects a must, • Experience with Mechanical Systems (HVAC , CFD [Fluid Dynamics], Boilers , Chillers , Pumps , CRAC / CRAH Units , Air Handling Units , etc.), • Experience in operational handover of mission-critical facilities, • Experience developing design/commissioning/operational standards and guidelines, • Experience performing root-cause analysis on complex failure scenarios, • Experience developing operating procedures and emergency procedures, • Experience performing field observations during construction, • Self Starter, self motivated, and should prioritize well and have the ability to successfully work independently, • A PLUS - Previous experience in the Military / Military Veterans ; Experience with Electrical / Mechanical: Navy nukes - EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc., • Effective Communicator- emails, phone, meetings. Strong organizational, communication, and reporting skills, • Microsoft Project, Excel, Teams, PowerPoint, etc. - ability to create complex reports, forecast modeling, etc. Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: y3kdqbrp86psygfb76jm1kqw6y@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionDescription: Dialectic is a full-service mechanical, electrical, and plumbing (MEP) engineering design and consulting firm with Headquarters located in the Crossroads of Kansas City, Missouri. Dialectic has a reputation for delivering inventive, flexible, and sustainable MEP designs for retail, education, restaurant, commercial and entertainment spaces. Our team, ranked as one of Kansas City’s most diverse engineering firms, is as talented as they are diverse and works hard to exceed our clients' expectations. Dialectic Inc. is looking to bring on a Project Manager as a key member of the team. The Project Manager manages the overall project direction, completion and financial outcome and administers both the owner and subcontractor relationships to meet deadlines on a wide variety of project types including retail, commercial, restaurant, industrial, healthcare, cannabis, mixed-use and hospitality. The Project Manager is responsible for directing and mentoring staff. The position requires business management acumen and candidates must demonstrate strong leadership, organizational and time management skills, as well as strong communication and client service skills. Key Responsibilities: • Manage MEP design projects for new buildings, renovations, and additions to existing buildings., • Oversee projects and project programs to ensure quality and on-time delivery of projects to clients., • Coordinate project schedule with the client and applicable project stake holders., • Manage client service and project communication, maintaining proactive communication throughout the project lifecycle., • Monitor project performance from start to finish to ensure project meets quality and budget expectations., • Provide coordination of project designs with outside consultants., • Direct internal design team to meet client specific requirements., • Provide review and feedback to the design team to maintain consistent client standards and project execution., • Follow firm’s design processes, including guiding Kick-off meetings, Design meetings, and Premieres., • Anticipate, identify, and promptly address impediments that could impact performance, financials, or timing of project delivery., • Assist with contract negotiations, proposal creation in coordination with business development team., • Assist with obtaining signed contracts from client in coordination with business development team., • Maintain accurate forecasting and projections for projects under PM’s charge., • Review and mark up draft invoices accurately and pursue reasonable additional services when project scope changes occur., • Facilitate communication across different projects and cross-functional teams., • Recognize opportunities for and develop additional business with existing clients., • Communicate with the clients, owners, and contractors to create and maintain a positive engineering experience., • Deliver excellence!Requirements: Required Skills: • Demonstrate strong organization and time management skills, and ability to work with fast paced deadlines while maintaining a positive design experience., • Demonstrate competency in a range of job sizes and complexity., • Ability to expeditiously read and interpret construction drawings, plans, and specifications., • Demonstrate the ability to lead and accomplish company objectives by maintaining and fostering a keen sense of professionalism, personal responsibility, and urgency., • Demonstrate ability to work effectively and collaboratively with all departments and disciplines to promote project and company success., • Demonstrate ability to communicate effectively with all levels of staff, clients, owners, other consultants, and subcontractors., • Demonstrate competence in computer applications including MS Office, project management software, and accounting software., • Demonstrate ability to be self-motivated, flexible with task interruptions, and capable of proactively solving problems., • Demonstrate excellent negotiation and interpersonal skills. Minimum Qualifications: • Bachelor’s Degree in the AEC (architecture, engineering, construction) or related industry., • 7 years of relevant MEP experience in commercial, retail, restaurant, and hospitality required, including at least 3 years of project management experience., • Microsoft Office, AutoCAD & REVIT proficiency, • Proficiency in project management standards and execution., • Knowledge and application of building design and construction principles., • Travel up to 15% as needed. Location: Kansas City, Missouri with the opportunity to work hybrid up to 2 days at home and 3 in the office. Equal Opportunity Employer (EEO): Dialectic, Inc. provides equal employment opportunity without regard to race, color, religion, sex, national origin, ancestry, citizenship, sexual orientation, age, disability, or status as a disabled veteran, recently separated veteran, Armed Forces Service Medal veteran, or other protected veteran, marital status, familial status, age, handicap or disability, genetic predisposition or carrier status, uniformed service status or any other characteristic protected by applicable law. To all recruitment agencies: Dialectic does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of Dialectic without a prior written search agreement will be considered unsolicited and the property of Dialectic. Please, no phone calls or emails. NOTICE TO CANDIDATES: RECRUITMENT FRAUD ALERT Dialectic representatives conduct all email communications exclusively through a company email address that ends with @dialecticeng.com. We extend offers of employment only after a comprehensive interview process and will never ask you for a payment of any sort nor offer one for any reason. Dialectic will not ask any applicant to purchase equipment, nor offer to reimburse any applicant for expenses incurred prior to employment. We will not request personal information until a legitimate offer of employment has been extended. If you suspect a recruitment attempt is fraudulent, you should cease communications. You may contact us at contactus@dialecticeng.com to verify whether a recruitment contact is legitimate. All legitimate job opportunities are posted on our company website’s careers page.

Job DescriptionDIRECT HIRE: The Project Manager leads the planning, execution, budgeting, and delivery of mission-critical data center construction projects from preconstruction through customer handover. Reporting to the Construction Director, this role partners closely with Design, Construction, Engineering, Procurement, and Operations teams to develop integrated project plans, manage project budgets and schedules, mitigate risks, and ensure successful delivery of hyperscale and enterprise data center facilities. The Project Manager drives cross-functional collaboration, maintains stakeholder alignment, and ensures projects are completed safely, on schedule, within budget, and to the highest quality standards.📍 Location: Barber Lake, TX. Per Diem: Paid per working day at GSA rate for site city, travel to/from site at start/end of project also covered 💰 Pay Range: $180K - $220K Retirement or pension plan, in line with local norms Health, dental, and vision insurance Generous PTO policy, in line with local normsEssential Job Duties: • Lead all phases of data center construction projects from project kickoff through commissioning, turnover, and customer handover while ensuring alignment with business objectives and project milestones., • Develop, maintain, and manage integrated project schedules using Primavera P6 and Microsoft Project, monitoring critical path activities and implementing recovery plans to maintain schedule commitments., • Own project budgets, cash flow forecasts, cost tracking, change order management, and financial reporting while ensuring effective cost control throughout the project lifecycle., • Coordinate with Design, Construction, Engineering, Procurement, Commissioning, and Operations teams to ensure project execution remains aligned with technical requirements, schedules, and capacity goals., • Facilitate design reviews, constructability meetings, project planning sessions, and coordination meetings while maintaining RACI matrices, action logs, and project documentation., • Manage procurement activities including RFP development, contractor prequalification, bid evaluations, contract awards, purchase change orders (PCOs), subcontract administration, and project closeout documentation., • Identify project risks affecting schedule, budget, quality, safety, procurement, and resource availability; develop mitigation strategies and drive timely resolution of project issues., • Monitor project performance by tracking key performance indicators (KPIs), preparing executive dashboards, and providing weekly project status reports to senior leadership and external stakeholders., • Lead cross-functional project teams across multiple geographic regions, providing resource planning, staffing coordination, mentoring, and performance development to support project success., • Conduct regular project stand-ups, progress meetings, executive reviews, lessons learned sessions, and project retrospectives to promote accountability and continuous improvement., • Ensure compliance with project contracts, company standards, quality requirements, safety regulations, and applicable building codes throughout all phases of construction., • Build and maintain strong working relationships with owners, contractors, architects, engineers, consultants, vendors, and commissioning teams to ensure effective communication and stakeholder alignment., • Support multiple fast-track projects simultaneously while balancing competing priorities, managing project risks, and maintaining delivery schedules across global project portfolios., • Utilize project management and collaboration platforms including Primavera P6, Microsoft Project, Procore, Ares, Smartsheet, Confluence, and advanced Microsoft Excel to manage project execution and reporting., • Travel to project sites as required (approximately 50% or greater) to oversee construction progress, participate in field coordination meetings, resolve project issues, and support successful project delivery.Preferred Qualifications:, • Bachelor's degree in Engineering, Construction Management, or a related technical field; Construction Management preferred., • 10+ years of project management experience supporting hyperscale data center, mission-critical, industrial, or large infrastructure construction projects., • Experience working for a hyperscale owner, developer, owner's representative, or general contractor delivering data center construction projects., • PMI-PMP, PRINCE2, or equivalent project management certification preferred., • Proven success delivering fast-track, multi-site construction projects across multiple regions., • Strong knowledge of civil, structural, architectural, mechanical, electrical, plumbing (MEP), procurement, scheduling, contract administration, and cost management., • Advanced proficiency with Primavera P6, Microsoft Project, Procore, Ares, Smartsheet, Confluence, and Microsoft Excel., • Excellent leadership, communication, stakeholder management, negotiation, and organizational skills with the ability to communicate effectively at executive and field levels., • Demonstrated ability to build, lead, and develop high-performing project teams while managing multiple complex projects in a fast-paced environment.Once you apply, please text "DCPM" to 904-712-6140 for a faster reply. INDH Powered by JazzHR zyDvOxuYFq

Job DescriptionDo you believe no challenge is too complex to solve? You’ll fit right in at U.S. Engineering Construction. We deliver award-winning mechanical contracting, construction, service, and maintenance solutions with a focus on performance and innovation. Our team of skilled and collaborative professionals drives every project from preconstruction through final testing, always aligned with our clients’ goals. Assists Project Manager with a variety of project related functions, including planning and coordinating onsite construction activities for designated projects, to ensure that project objectives are accomplished within prescribed time frame and funding parameters. Principal Duties and Accountabilities: • Draft RFIs (Request for Information) and Proposal Letters., • Review submittals and specifications., • Assist in documentation and budget control., • Take project meeting minutes and document substitution requests., • Assist Project Manager in the development and nurturing of client relationships., • Estimating change orders., • Develop and help monitor the project schedule., • Maintain procurement, proposal and correspondence logs., • Facilitate quality control measures., • Select products., • Perform man power loading charts., • Prepare and maintain productivity reports., • Direct entry and extension of change orders to subcontractors., • Develop O & M manuals., • Perform cost coding., • Materials recaps and material purchases., • Assist in safety programs and commissioning., • Perform or assist in value engineering., • Project Forecasting.Job Scope: Scope of work may vary, from working on one large project, to several smaller size projects. Education & Experience: • Bachelor’s degree in Mechanical Engineering, Construction Science, or Architectural Engineering preferred., • Equivalent technical training and related experience will be considered., • Minimum of 3 to 5 years’ technical or administrative experience in HVAC, piping, and plumbing at a commercial, industrial, or institutional level. Knowledge, skills, and abilities:, • Knowledge of construction engineering technology, processes and standards., • Team orientation and collaborative spirit., • Self-motivation; ability to drive results., • Effective communication skills., • Ability to develop and foster strong professional relationships., • Basic level of business acumen., • Ability to proactively identify potential problems and their solutions.Physical and/or travel demands:, • Routine driving to project sites required. Work will be done in a combination of office and job site environments., • Travel to, temporary assignment, or relocation may be required based on project needs and locations., • Physical demands include walking on uneven surfaces, climbing ladders, bending, kneeling, and lifting. Position includes sitting and standing, use of telephone, keyboard, and computer monitor. Benefits and Compensation: • The range for this position has been established at $64,960.00 - $91,756.00 per year and is US Engineering’s good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty, and training. • Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line.This position will be posted until August 15, 2026. To apply, please visit https://www.usengineering.com/careers/job-postings/. U.S. Engineering Construction is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability, or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Equal Opportunity Employer, including disabled and veterans. #IND Powered by JazzHR Q58QTAZNoq

Job Description U.S. Engineering has been an industry leader since 1893. How? Constant innovation and a willingness to evolve. The construction industry changes rapidly, and we cultivate a dynamic workplace where even our newest team members can influence change and make an impact. We know that our most valuable asset is our people. Join us! SENIOR PROJECT MANAGER Senior Project Manager - Construction, is a vital part of the US Engineering team and holds responsibility for overseeing the profitability and success of the project. The Senior Project Manager gets engaged from the preparation and review of estimates, through the construction phase, and takes charge of all activities from the start to on-time and on-budget completion. Additionally, business development expectations include strengthening existing relationships and fostering new ones. Principal Duties and Accountabilities: • Proficient at plan/spec estimating as well as conceptual estimating in a design/build/assist scenario., • Understands the total life cycle of a building and is able to guide customers to the best solution that aligns with their mission., • Partners with field leadership to ensure projects are installed on schedule while maintaining the required design criteria., • Work with customer base to ensure conceptual designs and budgets meet the customers’ needs and expectations., • Proficient at preconstruction activities such as formulating a project execution plan, detailed estimate reviews, commodity and equipment procurement, subcontractor selection, issuing subcontracts, submittals, and developing the project schedule., • Establish project objectives, procedures, and performance standards within scope of company policies and standard operating procedures., • Forecasts project profitability monthly, identifies trends, and makes adjustments to the project execution plan as necessary., • Manages subcontractor proposal requests, scope reviews and the issuing of subcontracts., • Responsible for establishing and monitoring schedule of field and subcontractor progress., • Assists in the coordination of safety programs and oversees job site safety reviews., • Coordinates all job correspondence., • Identifies opportunities for future projects and networks internally and externally to pursue such opportunities, in collaboration with the Vice President of Operations – Service and Special Projects, and others., • Responsible for understanding the offerings of US Engineering’s sister companies and promoting their services when appropriate., • Responsible for supporting the professional development of other team members through education, mentoring, and continuous feedback., • Conducts quarterly performance assessments of support staff and assists with field leadership feedback., • Thoroughly understands the strategic direction of US Engineering and aligns all project execution plans with the overall strategy., • WBS and work pack management (Facilitate VC/MX), • Build, maintain and track project Schedule (CPM Schedules), • Host weekly internal coordination meetings., • Responsible for creating and tracking closeout process including all equipment startups QA/QC, Commissioning, and warranty. Job Scope: The Senior Project Manager – should possess the ability to simultaneously manage multiple projects, ranging from $500.00 up to approximately $20,000,000 in value. Management Responsibility Acts as a project manager – management of a project team, on which the individuals comprising the team may vary by project. Education & Experience: • Bachelor’s degree in Engineering, Construction Management or related field., • Equivalent combination of field and relevant project leadership experience will be considered., • Minimum of 7-10 years of relevant experience is required.Knowledge, skills, and abilities:, • Thorough knowledge of mechanical construction industry practices, processes, and standards – including systems design, installation, and servicing., • Must possess a strong technical knowledge of HVAC systems, as well as a basic knowledge of plumbing systems and industrial processes., • Ability to maximize performance of project team through innovative and effective management techniques., • Superior communication and interpersonal skills, such as diplomacy, persuasion, etc. are essential to develop and foster effective professional relationships., • Time management and organizational skills., • Basic level of financial acumen necessary to manage project budget / performance., • Knowledge of the following computer programs: MS Word, Excel., • Strong problem-solving, negotiation, and conflict-management skills., • Ability to successfully drive project through completion. Physical and/or travel demands: • Routine daily driving to project sites required., • Infrequent overnight travel may be required, based on project assignments., • Physical demands include walking on uneven surfaces, climbing ladders, bending, kneeling, and lifting. Position includes sitting and standing, use of telephone, keyboard, and computer monitor. Benefits and Compensation: • The range for this position has been established at $115,360 to $163,624 and is US Engineering Innovations’s good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty, and training., • Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line.This position will be posted until August 15, 2026. To apply, please visit https://www.usengineering.com/careers/job-postings/. U.S. Engineering is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability, or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Equal Opportunity Employer, including disabled and veterans. #IND Powered by JazzHR 7gKtLCd5EF

Job Description Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is: • 100% employee-owned with 40+ years of industry history, • A Top 5 Systems Integrator Giant, • ENR Top 500 Firm We have a Construction Project Manager position available to initially service clients in multiple sites around the country including Kansas City, KS, Tulsa, OK and other locations as needed. The Project Manager will assist the Business Unit Manager in achieving the overall strategic objectives of the company. The primary areas of responsibility are project management, project delivery, and total quality management at our client sites. The Project Manager is expected to bring to bear all the necessary resources to fulfill the firm’s contractual obligations. The Project Manager also makes a significant technical contribution through his/her own efforts. Qualifications • Requires 5 -10+ years related experience, • Demonstrated knowledge and capability in Project management, mechanical system concept development, design, and layout; project budgeting and scheduling; preparing technical sections for project and procurement specifications; and reviewing drawings and technical specifications, • Excellent interpersonal and communication skills, • Has a strong understanding of Electrical engineering, design and documentation principles, practices and standards, an understanding of materials and systems, and a thorough knowledge of Engineering detailing and construction methodology. Applies these understandings in the delivery of projects Duties and Responsibilities • Responsible for managing projects that deliver engineering solutions to our clients that consistently exceed the clients' expectations, are on time, and are within budget, • Develops and administers project budgets and fiscal controls, and quality control provisions; performs project cost estimating and value engineering, as appropriate, • Represents the firm in business with clients, consultants, contractors, and other public and/or private agencies and organizations, • Responsible for participating in business development and quality assurance as directed by the Business Unit Manager, • Provides technical assistance in proposal development and presentations for new work; reports and study preparation; and project delivery, • Other duties and responsibilities assigned by the Firm’s Principals and client managers as deemed appropriate Certificates, Licenses, and Registrations Project Manager is not required to be a licensed professional engineer. Key Competencies Planning, Customer Focus, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving. Skills • All WM employees are required to be proficient in the use of Microsoft Office (Windows, Word, Excel, and Outlook), • Knowledge of project management principles, practices, techniques, and tools, • Ability to analyze comprehensive business processes, perform in-depth work analyses, and develop computer-generated flow charts Client Interaction All WM employees are expected to interact with clients in a highly professional manner. Project Manager is expected to properly represent WM’s service offerings to clients; and to quantify and describe to clients the business value associated with WM’s service offerings. Project Manager will participate directly with client site management and staff for daily work duties as assigned. Working Environment and Physical Effort • Work is normally performed in a typical interior/office and industrial manufacturing work environment, • Project Manager may be subject to travel assignments constituting up to 80% of the work schedule. Travel varies as a function of the project, • Work is typically performed Monday through Friday, with occasional weekend work required based on project needs., • Assignments may last multiple months at various U.S.-based project sites. Weekend travel may be available up to two times per month, subject to project schedule requirements and approval. Project housing, airfare, meals, and incidentals are covered by the company in accordance with company policy., • No or very limited physical effort required, • No or very limited exposure to physical risk *Job Descriptions are not exhaustive lists of all skills, responsibilities, or efforts associated with a job. They reflect principal job elements essential for performing the job and evaluating performance. Wunderlich-Malec is proud to offer a comprehensive employee-owner benefit package. Full-time employees may be eligible for the following benefits: Medical • Dental • Vision • Basic and Supplemental Life and AD&D • Long Term Disability • Voluntary Short Term Disability • Healthcare & Dependent Care Flexible Spending Accounts • Health Savings Account • Paid Time Off (PTO) • Paid Holidays • Tuition Reimbursement • Referral Bonus Program • 401(k)/Profit Sharing • 100% ESOP (Employee Stock Ownership Plan) • Employee Assistance Program • Will Preparation Resources • Worldwide Travel Assistance #LI-WM1 #LI-HYBRID Agency Statement Wunderlich-Malec does not accept unsolicited resumes from agencies. Any unsolicited resumes submitted to a Wunderlich-Malec employee, hiring manager, or representative, either directly or indirectly, will be considered the property of Wunderlich-Malec. No placement fee will be paid in connection with the submission of an unsolicited resume.

Job Description Position: Senior Coder Company: M & D Mechanical Contractors Location: Kansas City, MO, USA Contract Details: Full-time M & D Mechanical Contractors is seeking a highly skilled and experienced Senior Coder to join our team in Kansas City, MO. As a leading mechanical contracting company, we specialize in providing top-quality services to our clients in the commercial, industrial, and institutional sectors. We are looking for a talented individual who is passionate about coding and has a strong background in programming languages and software development. As a Senior Coder, you will be responsible for developing, maintaining, and troubleshooting software applications and systems. You will work closely with our team of developers, designers, and project managers to ensure that our projects are completed on time and to the highest quality standards. Your role will also involve mentoring and guiding junior coders, reviewing code, and implementing best practices to improve our coding processes. Key Responsibilities: - Develop and maintain software applications and systems using various programming languages and tools - Collaborate with cross-functional teams to design, develop, and implement solutions that meet business requirements - Troubleshoot and resolve technical issues in a timely manner - Review code written by junior coders and provide constructive feedback - Implement coding best practices and standards to ensure high-quality and efficient code - Mentor and guide junior coders to improve their coding skills - Stay updated with the latest coding trends and technologies to continuously improve our development processes - Communicate effectively with team members and project managers to provide updates on project progress and any potential issues - Participate in code reviews and provide suggestions for improvement - Adhere to project timelines and meet project deadlines Requirements: - Bachelor's degree in Computer Science, Software Engineering, or a related field - Minimum of 5 years of experience in software development and coding - Strong proficiency in programming languages such as Java, C++, or Python - Experience with web development and front-end technologies such as HTML, CSS, and JavaScript - Familiarity with database management and SQL - Excellent problem-solving and troubleshooting skills - Ability to work independently and in a team environment - Strong communication and interpersonal skills - Experience in mentoring and guiding junior coders is a plus - Knowledge of Agile development methodologies is preferred - Must be able to work full-time in Kansas City, MO, USA We offer a competitive salary and benefits package, as well as opportunities for career growth and development. Join our dynamic team and be a part of our success in delivering top-quality mechanical contracting services to our clients. Apply now!

Job DescriptionDo you believe no challenge is too complex to solve? You’ll fit right in at U.S. Engineering Construction. We deliver award-winning mechanical contracting, construction, service, and maintenance solutions with a focus on performance and innovation. Our team of skilled and collaborative professionals drives every project from preconstruction through final testing, always aligned with our clients’ goals. To model and coordinate Mechanical and Plumbing BIM models under the direction of the Lead Detailer and Regional Manager of Virtual Construction. The Virtual Construction Detailer will also utilize U.S. Engineering’s Construction company standards, adhering to current building codes, meet project requirements and coordinate with all trades on a given project. Principal Duties and Accountabilities: • Work closely with Lead Detailers and Virtual Construction Project Manager., • Within the scope of the project, model to build and coordinate 3d, intelligent models of that project and then create the deliverable documents required within the scope of the project(s)., • Must use knowledge of Revit software and building trades and codes to model, coordinate and produce shop and fabrication deliverables, • Coordinate models with all in-house trades under direction of Lead Detailer, as well as out of house project team., • Perform routine to complex assignments requiring a thorough knowledge of computer aided drafting system standards, practices and techniques., • Analyze submittals, sketches, notes and other input material to determine best approach to complete drawings., • Apply judgement and make decisions that protect US Engineering with respect to drawings and input interpretation., • With input from supervisor, lead detailer and other team-members review work performed by the detailing team to determine accuracy. (e.g. field superintendents and shop foremen), • Continue to develop increased proficiency in system operation with a resulting increase in productivity and learn how to use all software options.Job Scope: The Virtual Construction Detailer will be responsible for producing accurate working models to facilitate the fabrication and installation of the mechanical and plumbing systems. Education: • High school diploma or equivalency required, • Associates Degree in Engineering or Drafting Technology helpful, • Completion of a trade related apprenticeship program will be required in certain locations, based on union contractual agreements. Experience: • Proficiency with Revit software, • Proficiency with AutoCAD software preferred, • Proficiency with Navisworks Manage software., • Should have a working knowledge of Microsoft Office Word, Excel and Outlook., • Proficiency with Procore software preferred., • Experience with layout of HVAC / Piping / Plumbing, • Minimum of 5 years experience in the field as a Pipe Fitter, Plumber or Sheet Metal worker is preferred., • Understanding of layout of HVAC / piping / plumbing, • Understanding of mechanical systems (HVAC, Pipefitting, Plumbing) preferred Knowledge, skills, and abilities: • Thorough understanding of HVAC, Piping, and/or Plumbing systems, • Understanding of mechanical construction principles and processes, • Understanding of building codes, • Ability to define fabrication breaks for the shop, • Proficiency in the use of computer aided drafting software:, • Revit, • Navisworks Manage, • Basic AutoCAD Skills, • Bluebeam Revu helpful but not required, • Procore, • Autodesk Fabrication, • Analytical skills, • Ability to adapt to changing technology / computer systems, software, etc., • Ability to handle multiple projects simultaneously and adapt to shifting priorities, • Mathematical skills., • Ability to read and understand structural and architectural drawings. Physical and/or travel demands: • These duties require prolonged sitting and use of computer keyboard, mouse, and monitor., • Visual acuity is required to discern drawings, and manual dexterity for operating computer equipment., • Travel to remote jobsite for meetings, trouble-shooting and/or constructability review is required., • May be required to be on-site for several months during the detailing/coordination phase of a project. Benefits and Compensation: • The range for this position has been established at $28.27- $38.82 per hour and is US Engineering’s good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty, and training., • Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line.This position will be posted until August 31, 2026. To apply, please visit https://www.usengineering.com/careers/job-postings/. U.S. Engineering Construction is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability, or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Equal Opportunity Employer, including disabled and veterans. #IND Powered by JazzHR 4ExqG5DJa7

Job DescriptionDo you believe no challenge is too complex to solve? You’ll fit right in at U.S. Engineering. We deliver award-winning mechanical contracting, construction, service, and maintenance solutions with a focus on performance and innovation. Our team of skilled and collaborative professionals drives every project from preconstruction through final testing, always aligned with our clients’ goals. Director of HR Operations & Total Rewards The Director of HR Operations & Total Rewards serves as a strategic and operational leader responsible for optimizing the organization’s HR infrastructure and advancing a comprehensive, competitive total rewards philosophy. This role directs all aspects of HR operations, including compensation, benefits, HRIS, analytics, and policy administration, ensuring alignment with organizational goals, compliance standards, and a culture of equity, engagement, and excellence. Principal Duties and Accountabilities: • Develop and execute the HR operations and total rewards strategy to align with organizational goals and drive a consistent, high-quality team member experience., • Design, implement, and govern compensation programs and pay structures that are equitable, performance-based, and market-competitive., • Lead the administration and continuous improvement of employee benefits programs that enhance well-being, engagement, and retention while balancing cost and competitiveness., • Oversee HR technology systems; partner with Information Technology, Finance, and Payroll to ensure integration, automation, data accuracy, and ease of use across HRIS and related platforms., • Establish and maintain robust HR analytics, dashboards, and reporting tools that inform leadership decisions and measure organizational health and people outcomes., • Ensure compliance with applicable laws and regulations by developing and maintaining policies, procedures, and audit practices that mitigate risk and promote consistency., • In partnership with the HR leadership team, oversee the preparation, submission and maintenance of EEO-1 and Affirmative Action plan reporting., • Oversee leave of absence programs and other regulatory processes to ensure legal compliance, operational efficiency, and a supportive team member experience., • Evaluate, select, and manage relationships with vendors, brokers, and consultants to ensure quality, cost-effectiveness, and alignment with organizational objectives., • Lead process improvement initiatives that streamline HR operations, leverage technology, and advance standardization and scalability across the enterprise., • Develop and implement communication and change management strategies that promote understanding and engagement in HR programs and initiatives., • Participates in the development of departmental budgets and is accountable to budgetary expectations. Education: • Bachelor’s degree in Human Resources, Business Administration, Finance, or a related field required., • Master’s degree in Human Resources, Business Administration (MBA), Organizational Development, or a related discipline preferred. Experience: • Minimum of 10+ years of progressive experience in Human Resources, including at least 5 years in a leadership role overseeing HR operations, compensation, benefits, or HR systems., • Demonstrated experience designing and managing total rewards programs (compensation, benefits, recognition, and wellness)., • Proven success implementing or optimizing HR information systems and leveraging HR analytics for business insight., • Strong knowledge of federal and state employment laws, compliance, and HR governance practices., • Experience leading cross-functional HR projects and driving process optimization or automation initiatives., • Professional certification(s) such as SHRM-SCP, SPHR, CCP (Certified Compensation Professional), or CEBS (Certified Employee Benefit Specialist) preferred., • Industry experience within construction or manufacturing industries helpful. Knowledge, skills and abilities: • Extensive and comprehensive knowledge of Human Resources principles, best practices, and regulatory requirements, with particular depth in total rewards, HR operations, and compliance., • Proven expertise in the design, implementation, and administration of total rewards programs—including compensation frameworks, incentive plans, and benefits strategies—that align with organizational goals., • Advanced proficiency in HR Information Systems (HRIS), data analytics, and reporting, with the ability to leverage technology and insights to drive strategic and operational decisions., • Strong analytical and problem-solving skills; able to frame complex issues, interpret data, and develop practical, high-impact solutions., • Demonstrated strength in project management—planning, resourcing, and executing concurrent initiatives that deliver measurable outcomes on time and within budget., • Effective leadership capability, fostering high-performing teams through coaching, accountability, and continuous professional development., • Exceptional relationship-building and collaboration skills, with the ability to partner effectively across business functions and influence at all organizational levels., • Strategic agility and adaptability; able to navigate organizational change, manage competing priorities, and sustain performance through periods of transformation., • Strong business and financial acumen with a continuous improvement mindset and commitment to operational excellence., • Influential change leader who drives innovation, champions inclusion and equity, and enhances the team member experience through HR operational excellence. Physical and/or Travel demands: • Infrequent travel between company regional offices, and to other potential project sites, will be required., • Requires frequent sitting, keyboarding, use of monitor and telephone. Benefits and Compensation: • The range for this position has been established at $142,000 to $200,000 per year and is U.S. Engineering’s good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty, and training., • Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line. This position will be posted until April 30th, 2026. To apply, please visit https://www.usengineering.com/careers/job-postings/. Candidates must be legally authorized to work in the United States on a full-time basis without requiring future sponsorship for employment visa status. U.S. Engineering is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities and job specifications required of employees so classified. U.S. Engineering Service reserves the right to revise as needed. The job description does not constitute a written or implied contract of employment. Powered by JazzHR qtg289Rw2f

Job Description Job Title: Sales Engineer Location: Midwest Metro Areas (Multiple Locations Available) Company: Tuttle AAG, LLC About Us: Tuttle AAG, LLC is a trusted leader in mechanical contracting and custom equipment solutions, serving industries such as food processing, pharmaceuticals, and pet food. With over 50 years of excellence, we specialize in designing, fabricating, and installing custom turnkey systems that help our clients succeed. Join a company committed to quality, innovation, and building lasting partnerships. Position Overview: Tuttle AAG, LLC is looking for an ambitious Sales Representative to drive business growth by identifying, pursuing, and developing new accounts while maintaining exceptional service with existing clients. This role is crucial to expanding our reach into new industries and markets, showcasing the value of our mechanical contracting and custom equipment solutions. Key Responsibilities: • Strategically identify and target potential clients across various industries., • Build and develop new accounts, fostering strong, long-term relationships., • Maintain current relationships with existing customers., • Collaborate closely with engineering and project teams to craft tailored solutions., • Manage all aspects of project execution, including planning, scheduling, and resource allocation., • Supervise and coordinate installation teams, ensuring high-quality workmanship and adherence to safety standards., • Serve as the primary point of contact for clients, addressing concerns and ensuring satisfaction. Qualifications: • Proven track record in sales, preferably in mechanical contracting or industrial equipment sectors., • Exceptional skills in networking, prospecting, and account development., • Prefer individuals with current customer network and existing customer relationships., • Strong ability to communicate and explain technical concepts to diverse audiences., • Self-driven, results-oriented, and passionate about business growth., • A valid driver’s license and ability to travel for business purposes. Why Join Us? • Competitive salary with potential performance-based incentives., • Comprehensive benefits package, including health insurance and retirement plans., • Opportunities for professional development and career growth., • Be part of a passionate team that values innovation and quality. How to Apply: If you're ready to make an impact and grow with a company dedicated to excellence, please submit your resume and cover letter to Tuttle AAG, LLC. We’re excited to connect with talented professionals who share our vision for success! To learn more, check out our website at www.Tuttleinc.com #hc180201

Job DescriptionDo you believe no challenge is too complex to solve? You’ll fit right in at U.S. Engineering Innovations. We deliver award-winning mechanical contracting, construction, service, and maintenance solutions with a focus on performance and innovation. Our team of skilled and collaborative professionals drives every project from preconstruction through final testing, always aligned with our clients’ goals. At the Construction Group level, lead and facilitate all estimating operations. Oversee people, processes, and systems to ensure efficient, accurate, and cost-effective estimating practices across the organization. Principal Duties and Accountabilities: • Provide managerial guidance to Regional Managers of Estimating and/or Chief Estimator(s)., • Chair the Estimating steering committee as needed., • Support executive leadership and administrative functions related to the Estimating department., • Evaluate, implement and maintain estimating software, tools, and technology., • Establish and maintain standard operating procedures for the estimating across the USEC system., • Provide strategic insights to leadership regarding market conditions, competitor activity, and project pursuit decisions., • Collaborate with Directors of Preconstruction to maintain comprehensive cost history database (Vector) for future benchmarking., • Lead continuous improvement initiatives to enhance estimating speed, accuracy, quality, and win rate., • Develop and maintain strong relationships with key subcontractors, vendors and suppliers., • Set policies for software platforms and configurations in alignment with industry standards., • Creates and assigns developmental projects for estimating teams across the Construction group., • Monitor overall workload, output quality, and performance of regional estimating operations., • In partnership with the Vice Presidents of Project Development, the Director of Information Technology, and Regional Estimating Managers, establish and oversee the department budget for hardware and software., • Coordinate software training with Regional Estimating Managers., • Stay current on industry software, hardware, and best practices; propose and implement improvements as needed., • Assist with estimate development when required.Job Scope: Routinely collaborates with Vice Presidents of Project Development and corporate/regional Vice Presidents of Operations to support company objectives with a “one team” approach. Management Responsibility: • Supervisor – responsible for hiring, performance management and pay administration for subordinates. List supervised positions: Estimators, • Acts as a project manager – management of a project team, on which the individuals comprising the team may vary by project.Education:, • Associates Degree or Bachelors Degree in Engineering, Construction Management or a related field., • Equivalent combination of technical training and/or related experience will be considered.Experience:, • Minimum of 7 years relevant mechanical construction industry experience is required., • Minimum of 1 year construction operations supervisory, supervising estimating function.Knowledge, skills, and abilities:, • Strong understanding of HVAC, piping, and plumbing systems, • Knowledge of mechanical construction operations, principles and project life cycle., • Proficiency with MS Word, Excel. PowerPoint, and internet research tools., • Demonstrated leadership ability with success managing teams in a fast-paced. Shifting-priority environment., • Strong collaboration skills; able to foster cooperation across teams., • Excellent verbal and written communication skills, including presenting to leadership, clients, engineers, and project teams., • Strong analytical and problem-solving skills., • Knowledge of current industry technologies and ability to lead adoption of new systems and tools., • Ability to manage multiple projects simultaneously and adjust to changing priorities.Physical and/or travel demands The Estimating Director role requires prolonged sitting and frequent use of computer, including keyboard, mouse, and monitor. Visual acuity is essential for reviewing drawings. Travel to regional offices for meetings, training and technical support is required. Benefits and Compensation: The range for this position has been established at $142,080.00 - $200,000.00 and is US Engineering’s good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty, and training. Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package including health, dental, and vision plans, and retirement. This position will be posted until August 15, 2026. To apply, please visit https://www.usengineering.com/careers/job-postings/. Candidates must be legally authorized to work in the United States on a full-time basis without requiring future sponsorship for employment visa status. U.S. Engineering is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities and job specifications required of employees so classified. U.S. Engineering reserves the right to revise as needed. The job description does not constitute a written or implied contract of employment. Powered by JazzHR IpGV9UGnZ0

Job Description IFP Motion Solutions Inc. is seeking a talented and driven Project Engineer to join their ValvePak group, responsible for custom hydraulic manifold and circuit design across low- to high-volume products. In this role you will own projects from concept through delivery; working directly with customers to define requirements, designing the circuit and manifold solution, and coordinating closely with the shop floor to bring each build to completion. While you will take responsibility for your individually assigned projects, the company provides extensive resources in support of your work. This is a great opportunity for someone with a hydraulics or design background who wants to grow; willing to train the right candidate. Responsibilities will include: • Own custom manifold and hydraulic circuit design projects from concept through production for low- to high-volume products., • Manage projects start to finish, including timelines, quoting, budgets, and deliverables with a strong focus on the customer., • Interact directly with customers to understand their application, define scope, and develop solutions that meet stated requirements., • Design hydraulic circuits and manifolds in AutoCAD, including schematic development and manifold layouts., • Size and select appropriate hydraulic components to meet performance and application requirements., • Define a project budget, control costs, and work with vendors to obtain pricing and set appropriate customer expectations., • Design and witness system tests, and document any design or as-built changes., • Coordinate heavily with the shop floor to ensure correct understanding of project scope, schematics, design, and system requirements, and to resolve production issues., • Maintain accurate project documentation, BOMs, and revision control throughout the project lifecycle., • Occasionally support system set-up and troubleshooting at customer sites as needed. About IFP: IFP Motion Solutions Inc. is a growing motion control corporation headquartered in Cedar Rapids, Iowa. The business spans 13 states with four physical locations: Cedar Rapids, Minneapolis, Houston, and Kansas City. It employs 210+ team members across: Engineering, Manufacturing, Assembly, Hydraulic Repair, Field Service, Warehouse & Distribution, Customer Service, Purchasing, Accounting, Marketing, and Sales. IFP's locations collaborate to serve a unique blend of manufacturing, repair & refurbishing, design engineering, and components distribution. Their customers include industrial manufacturers, mobile integrations, and fluid power OEMs. Combined with their knowledgeable sales team and expansive inventory, they can design, prototype, manufacture, or service any conceivable motion control system. Requirements Minimum Requirements: • Strong understanding of physics, materials, and design principles., • Experience in AutoCAD or similar for schematic design and manifold layouts., • Excellent attention to detail. Must be willing and able to learn new technologies quickly., • Solid verbal and written communication skills., • Ability to work well as an individual and in a team and successfully interact with customers at multiple levels of responsibility in a manufacturing or production environment., • Ability to work on-site full-time and coordinate closely with the shop floor., • Strong project management and organizational skills, with the ability to own multiple projects simultaneously and manage competing timelines. Preferred Requirements: • Four-year degree in Mechanical Engineering or equivalent from an accredited college/university (strongly preferred)., • Ability to read and interpret hydraulic schematics and circuits., • Experience sizing and selecting hydraulic components for an application., • Prior experience with manifold design and HyDraw or similar circuit design software., • Knowledge of GD&T., • Prior experience in a custom-build or made-to-order manufacturing environment, or in a multi-disciplined engineering environment., • Willingness to travel for occasional field support. Typically up to 15%. Benefits Starting wage commensurate with the experience level of the candidate. Enjoy a rewarding work environment and competitive benefits, including 401(k) and Profit Sharing with financial advisor support, medical, dental, vision plans, life and pet insurance, wellness program, and fitness club subsidies.

Job DescriptionDo you believe no challenge is too complex to solve? You’ll fit right in at U.S. Engineering Innovations. We deliver award-winning mechanical contracting, construction, service, and maintenance solutions with a focus on performance and innovation. Our team of skilled and collaborative professionals drives every project from preconstruction through final testing, always aligned with our clients’ goals. Responsible for estimating activities for assigned projects, including learning from the Chief/lead estimator- bid preparation, understanding final bid tabulation, and client relationship management. Principal Duties and Accountabilities: • Learning HVAC, plumbing, piping and sheet metal take-off, estimates – including hard bid and conceptual., • Review and understanding proposal specifications and drawings to determine scope of work and required contents of estimate. Develop a pre-bid “checklist” for each bid., • Learn and maintain files of working documents as back-up for estimate figures, including current accurate information on prices from suppliers through direct contact and material and equipment scoping., • Learn bid preparation process and final closeout for hard bids from Chief/lead estimator., • Participate in pre-bid meetings, understand and assist the team in the development of bid strategy to win projects., • Learn the collaboration strategies with project development and operation team on proposals., • Learn the procedures of the Preconstruction Services team with conceptual estimates., • Meet and develop a relationship with outside vendors, suppliers, and subcontractors during bid preparation., • Build and maintain effective relationships with client counterparts., • Learn the principles of system layout and takeoff of incomplete drawings., • Participate in project meetings with Estimating team and management as appropriate., • Learn to manage bidding documents and file structure., • Client relationship management as required, including client-sponsored functions., • Partner with regional, project and estimating management on constructability review, workforce requirements, schedule, and other trade impacts., • Work directly with Bid Coordinator regarding distribution of bid information and receiving of quotes.Education & Experience:, • High School Diploma / GED required., • Prefer degree in Engineering or Construction Management; equivalent combinations of technical training, trade school and relative experience., • Preferred 3 years’ experience in construction industry., • Preferred experience working with QuickPen, Autobid, Quote Express mechanical or similar software preferred., • Prefer some industry experience with HVAC and plumbing – including commercial, institutional, and industrial. Knowledge, skills, and abilities:, • Basic knowledge of estimating techniques and cost control., • Preferred technical knowledge of mechanical construction, HVAC, piping, plumbing, etc., • Preferred technical knowledge of general and mechanical construction to interpret all project documents and the impact it will have on estimate., • Ability to learn and interpret computerized cost data and systems., • Learn to be self-sufficient and work under the supervision of a lead, Senior or Chief estimator., • Must learn to facilitate the bid process through its completion., • Excellent verbal and written communication skills., • Keen attention to detail / accuracy., • Proficiency with computers and estimating software., • Learn to use discretion and make judgments on relative significance of bid components., • Learn, understand and practice the terms and conditions that impact bid strategy., • Must work in a collaborative team environment and ability to enthusiastically represent the company’s core values, mission, history, and culture., • Operate with a strong sense of urgency and work with proficiency to deliver results., • Strong analytical skills combined with resourcefulness to find all routes to the most effective results., • Proficiency in Microsoft Excel, Bluebeam and Procore.Physical and/or travel demands:, • Occasional travel to regional offices may be required., • This position is primarily performed in an office setting, which includes regular sitting, use of computer keyboard and monitor, and telephone. Occasional bending, kneeling, standing, and walking, and lifting of light objects required. Benefits and Compensation:, • The range for this position has been established at $64,360 - $91,756 per year and is US Engineering’s good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty, and training., • Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line.This position will be posted until August 15, 2026. To apply, please visit https://www.usengineering.com/careers/job-postings/. U.S. Engineering is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability, or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Equal Opportunity Employer, including disabled and veterans. #IND Powered by JazzHR Gw4AmDqL7Q

Job DescriptionDo you believe no challenge is too complex to solve? You’ll fit right in at U.S. Engineering Service. We deliver award-winning mechanical contracting, construction, service, and maintenance solutions with a focus on performance and innovation. Our team of skilled and collaborative professionals drives every project from preconstruction through final testing, always aligned with our clients’ goals. TEST AND BALANCE/CLEANROOM TECHNICIAN The Test and Balance/Cleanroom Technician will perform preventative maintenance, in addition to certified testing, correcting, and balancing specialized heating, and cooling of ventilation systems of large local commercial areas. Principal Duties and Accountabilities: • Inspect and perform equipment repairs and replacements., • Perform certifications for fume hoods and bio-safety cabinets., • Measure and document both viable and non-viable particulates., • Ability to identify and troubleshoot various air handling systems, exhaust systems, ductwork, and fluid flow equipment associated with commercial and industrial HVAC applications., • Respond to emergency maintenance and service requests, • Review and analyze data for reporting., • Adhere to all safety policies and procedures., • Other tasks and duties as they arise., • Interest and ability to join local union.Education:, • A high school diploma or GED equivalent.Experience:, • A minimum of 2 years of previous Test and Balance/ Cleanroom experience is required., • Ability to understand HVAC systems and HVAC control systems., • Proficient with Microsoft Office products, including Excel, Word, and Visio., • Working knowledge of fume hoods and bio-safety cabinets.Knowledge, skills, and abilities:, • Keen attention to detail and good organizational skills., • Excellent customer service and professional communication skills., • Ability to adapt to changing priorities and excel in a fast-paced work environment with frequent interruptions., • Team mindset – flexible to help where the team will benefit most and develop effective professional relationships, • Demonstrates a sense of urgency as required.Benefits and Compensation:, • The hourly range for this position has been established at $26.00 to $60.00 per hour and is US Engineering Service’s good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to experience, education, specialty, and training. Applications are accepted on an ongoing basis. To apply, please visit https://www.usengineering.com/careers/job-postings/. Candidates must be legally authorized to work in the United States on a full-time basis without requiring future sponsorship for employment visa status. U.S. Engineering Service is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability or veteran status. U.S. Engineering Service is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities and job specifications required of employees so classified. U.S. Engineering reserves the right to revise as needed. The job description does not constitute a written or implied contract of employment. Powered by JazzHR HJz0mHrcjM

Job Description Mechanical Engineer Kansas City, MO (Downtown) Direct Hire/ Permanent Placement $80k - $150k (mid.-sr. roles open), Hybrid Work Schedule, Medical, Dental, Vision, FSA, 401(k) with match, PTO, etc. This particular client is a multidisciplinary engineering firm. Their project portfolio includes mission critical – Data centers, healthcare, industrial manufacturing, education, energy, transportation, etc. ROLE/ RESPONSIBILITIES/ HIGHLY PREFERRED EXPERIENCE • Prepare mechanical system construction documents, • Technical design and quality control, mechanical system calculations and layouts, • Produce of construction document, Construction administration, site visits, and shop drawing review, • Project Management, • Revit, AutoCAD, Trane Trace, • HVAC system, ductwork, and hydronic design, • BSME, BSAE or similar with 3+ years’ US experience, • EIT or PE (preferred), • No VISA sponsorship available

Job DescriptionDescription: Dialectic is a full-service mechanical, electrical, and plumbing (MEP) engineering design and consulting firm with Headquarters located in the Crossroads of Kansas City, Missouri. Dialectic has a reputation for delivering inventive, flexible, and sustainable MEP designs for retail, education, restaurant, commercial and entertainment spaces. Our team, ranked as one of Kansas City’s most diverse engineering firms, is as talented as they are diverse and works hard to exceed our clients' expectations. Dialectic offers highly competitive benefits that include eligibility for: • ESOP Ownership, • Generous 401K Matching Program with company match and immediate vesting, • Annual Bonus Plan for all employees, • Generous Low-Cost Benefits including medical, dental, vision, life insurance, disability, LegalShield, etc., • Healthy Lifestyle Reimbursement Program, • Generous PTO (Personal Time-Off) policy, • Eight (8) paid Company-paid Holidays, • Flex work schedule options, • Amazing office culture and environment with free snacks, and drinks, • Best in Class Employee Referral Bonus Program, • Rewards for Certifications and Exams, • We believe that a positive and enjoyable work environment enhances productivity and job satisfaction. Our company culture embraces moments of fun, celebration, and camaraderie., • Company events include Annual Holiday Event and ESOP valuation party, Indoor Mini Golf Tourney, Annual Chili Cookoff, Mario Kart Tourney, Holiday Costume Contests, Ping Pong, and much more!, • Pay It Forward Days with volunteering options for charities!, • Outstanding Internship Program Dialectic is looking to add a Sr Mechanical Engineer/Designer to our team. The Sr Mechanical Engineer/Designer will ensure accurate technical drawings and process improvement for our MEP Engineering firm which focuses on the design of systems for business, retail, housing, education, and entertainment industries. The Sr Mechanical Engineer/Designer will act as a technical expert in their discipline, providing guidance and direction, actively leading efforts to grow the department’s technical expertise. This position will perform quality review of work developed by others, will present complex technical solutions to clients, and will foster technical client relationships by acting as a point of contact for strategic clients and members of the senior leadership team. Key Responsibilities include: • Independently perform all the tasks necessary to complete design elements for engineering works., • Assess project conditions requirements against information provided and communicate these findings required to the client., • Review local building code, utility, and landlord information to determine location specific design requirements, contact these entities, document these findings and to present to the client., • Coordinate design requirements and decisions with other disciplines, BIM department, and project management., • Reference client standards and prototypical designs., • Perform mechanical system design analysis and properly select HVAC and equipment and complete energy compliance forms., • Participate in Premieres, project retrospectives and continuous improvement activities., • Respond to RFIs and review submittals with oversight from senior design staff., • Engage in ongoing learning and professional development to improve technical knowledge., • Provide guidance to entry level engineers.Requirements: Minimum Qualifications: • Bachelor's degree in Architectural, or Mechanical Engineering required plus 6+ years of demonstrated experience required., • Demonstrates strong REVIT/AutoCAD and office computer proficiency., • Strong understanding of local codes and amendments, with the ability to interpret and apply the codes towards system design and calculations., • Strong familiarity with building structures, mechanical, electrical, and plumbing systems and how they interact. Preferred Qualifications: • Bachelor's degree in Architectural, Mechanical, or Construction Engineering plus 8+ years of applicable experience, • Professional Engineering (PE) license Equal Opportunity Employer (EEO): Dialectic, Inc. provides equal employment opportunity without regard to race, color, religion, sex, national origin, ancestry, citizenship, sexual orientation, age, disability, or status as a disabled veteran, recently separated veteran, Armed Forces Service Medal veteran, or other protected veteran, marital status, familial status, age, handicap or disability, genetic predisposition or carrier status, uniformed service status or any other characteristic protected by applicable law. To all recruitment agencies: Dialectic does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of Dialectic without a prior written search agreement will be considered unsolicited and the property of Dialectic. Please, no phone calls or emails. NOTICE TO CANDIDATES: RECRUITMENT FRAUD ALERT Dialectic representatives conduct all email communications exclusively through a company email address that ends with @dialecticeng.com. We extend offers of employment only after a comprehensive interview process and will never ask you for a payment of any sort nor offer one for any reason. Dialectic will not ask any applicant to purchase equipment, nor offer to reimburse any applicant for expenses incurred prior to employment. We will not request personal information until a legitimate offer of employment has been extended. If you suspect a recruitment attempt is fraudulent, you should cease communications. You may contact us at contactus@dialecticeng.com to verify whether a recruitment contact is legitimate. All legitimate job opportunities are posted on our company website’s careers page.

Job DescriptionDo you believe no challenge is too complex to solve? You’ll fit right in at U.S. Engineering Construction. We deliver award-winning mechanical contracting, construction, service, and maintenance solutions with a focus on performance and innovation. Our team of skilled and collaborative professionals drives every project from preconstruction through final testing, always aligned with our clients’ goals. Leads the AIMS Construction Division safety function and partners with corporate EHS leadership to develop, implement, and continuously improve company safety, health, and environmental (EHS) programs. Ensures consistent execution across AIMS operations and projects through standards, training, field leadership, audits/inspections, incident management, and accountability. Drives a proactive safety culture aligned with the company’s core value of ensuring a safe working environment. Job Scope: The Safety Director – AIMS is a critical position at U.S. Engineering Construction and is responsible for (1) partnering with corporate leaders to support the development of company-wide safety programs and standards and (2) leading implementation and sustained execution of those programs across the AIMS division. This position works closely with the corporate Director, EHS (Westminster, CO), the Safety Director – Midwest (Kansas City, MO), the Safety Director – Rocky Mountain (Westminster, CO) members of the Safety Committee, operations leadership teams, the Management Committee to align strategy, share best practices, and drive consistent performance. Principal Duties and Accountabilities: Program Leadership, Strategy, and Governance • Plans, develops, implements, and leads corporate and regional safety, health, and environmental protection programs that support the company’s core value to ensure a safe working environment., • Keeps current on construction industry safety standards and regulatory requirements and evaluates the corporate safety program to ensure alignment with best practices., • Assists in the development and implementation of company-wide safety programs and initiatives, including documenting program requirements, communicating expectations, and training employees on their roles and responsibilities to support consistent execution., • Provides leadership, administrative, and technical direction on corporate safety and health programs, procedures, and policies; makes recommendations to the Management Committee on safety-related issues., • Participates in the corporate safety council to support strategic goals related to safety., • Drives performance metrics and accountability for safety performance across the AIMS division by establishing and tracking leading and lagging indicators, analyzing trends, communicating results to operations and corporate leadership, and ensuring timely corrective actions and continuous improvement across projects and facilities., • Serve as a delegate for the Director, EHS during absences as requested. Division & Project Execution / Operational Partnership • Provides direction to division leaders and project leaders to ensure compliance with safety and incident management programs, procedures, and policies., • Collaborates with project management to provide technical and administrative direction to on-site safety staff and field personnel, including support for staffing plans and coverage needs., • Supports pre-job planning, procurement phases, and preconstruction meetings as needed; reviews and/or develops site-specific safety plans and coordinates site-specific training when required., • Controls hazardous working conditions and unsafe employee activities through safety leadership, coaching, and collaboration with operations supervisory personnel., • Maintains stop-work authority and intervenes when conditions or behaviors present an imminent danger or serious risk; ensures hazards are corrected prior to resuming work. Compliance Assurance, Audits, and Corrective Actions • Conducts proactive jobsite audits/inspections; documents findings, prepares reports, and tracks corrective actions to closure., • Reviews safety incident and inspection documentation to ensure required records and reports are complete, accurate, and submitted per established procedures; implements and/or verifies appropriate corrective actions., • Accompanies safety, health, and insurance inspectors during walkthroughs and coordinates or assists in preparing written responses and appeals related to safety citations/violations., • Assists the company in representing the organization in regional safety-related hearings and interactions (OSHA, etc.)., • Manages the existing drug and alcohol testing procedures across the division and ensures consistent administration and documentation. Incident Management, Crisis Preparedness, and Risk Reduction Thoroughly investigates safety incidents, prepares required documentation, identifies root causes, and communicates status and learnings to management in accordance with corporate procedures. • Assists in the development and implementation of the corporate Crisis Management Plan, including maintaining plan documentation, communicating expectations, and training employees regarding responsibilities under the plan., • Works closely with the Manager of Corporate Risk to minimize liability and workers’ compensation costs by owning end-to-end claim management (submission/first notice of loss through investigation, coordination with adjusters/providers, return-to-work support, and claim closeout) and ensuring adherence to claim management best practices., • Monitors and supports the return-to-work process for injured employees to minimize the impact of injuries; assists in identifying appropriate modified duty tasks when available. Training, Coaching, and Safety Culture • Develops and facilitates safety training programs, including field employee orientation and recurring safety training on relevant topics., • Partners with operations leaders to strengthen safety culture through coaching, recognition, accountability, and consistent application of expectations., • Assists in the development and implementation of corporate safety recognition programs that effectively reward employees for ensuring a safe working environment; regularly communicates the status of safety performance. Safety Supplies, PPE, and Budget Stewardship • Responsible for purchasing and/or approving purchases (within delegated authority and the appropriate budget) for safety supplies, specialized PPE, and other safety program expenses, including safety training materials/resources and safety incentive program costs; partners with operations and procurement to support standardization, compliance, and consistent availability across locations. Subcontractor/Partner Safety (include if applicable) • Sets and enforces subcontractor safety requirements, including prequalification and confirmation that subcontractors onboard and orient their own employees in accordance with their safety and health program. Monitors compliance, verifies implementation in the field, and ensures timely corrective actions to maintain consistent site safety performance. Management Responsibility • Serves as the Safety Director with direct supervisory responsibility for AIMS division safety staff. Provides leadership and direction to ensure consistent execution of the safety program across the region, including setting goals and priorities, assigning work, allocating resources, and driving accountability for results. Exercises full people-management authority for direct reports, including hiring and onboarding, coaching and development, performance reviews, compensation and promotion recommendations, and corrective action up to and including termination in accordance with company policy. Education & Experience: • Bachelor’s degree in Occupational Safety & Health, Environmental Science, Construction Management, or related field preferred., • Minimum of 10–15 years of safety experience in construction, industrial, or mechanical systems industries., • 5 years of experience in a regional or multi-site leadership role is a plus., • Experience supporting fabrication, modular construction, or service-based environments preferred., • Certified Safety Professional (CSP), Construction Health & Safety Technician (CHST), or equivalent professional certification preferred. Knowledge, skills, and abilities: • Strong working knowledge of federal, state, and local construction safety regulations., • Deep understanding of mechanical construction industry practices, processes, and standards., • Proven leadership in developing and sustaining a positive safety culture., • Ability to recognize hazardous situations and implement necessary corrective measures., • Excellent communication, coaching, and interpersonal skills with the ability to influence all levels of the organization., • Ability to evaluate risk, interpret data, and recommend effective solutions., • Skilled in incident investigation, hazard analysis, and development of corrective action strategies., • Strong organizational and time management skills; able to manage multiple priorities across geographically dispersed areas., • Excellent ability to establish and foster effective professional relationships with employees at all levels, vendors, contractors, and partners., • Proficiency in Microsoft Office Suite and safety management software applications. Physical and/or travel demands: • Work is performed in both active field project environments and office settings., • Regular travel to projects within the division (approximately 40–60%)., • Moderate travel to corporate offices or remote project locations., • Physical requirements include walking on uneven surfaces; climbing ladders and stairs; bending, kneeling, and crouching; and moderate lifting consistent with typical jobsite requirements.Benefits and Compensation:, • The range for this position has been established at $125,840.00 - $177,750.00 per year and is US Engineering’s good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty, and training., • Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line.This position will be posted until July 31, 2026. To apply, please visit https://www.usengineering.com/careers/job-postings/. U.S. Engineering is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability, or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. #IND Equal Opportunity Employer, including disabled and veterans. Powered by JazzHR oXIkDG7mym

Job Description Engineering Manager Kansas City, KS - Full Time Productive Resources (www.productiveresources.com) is seeking a candidate to be part of our engineering team at our customer's facility in Kansas City, KS. As a member of our team, the selected candidate will be an experienced and driven Engineering Manager to lead cross-functional product development efforts from concept through production. This role is responsible for coordinating engineering programs, managing project timelines, and ensuring collaboration across hardware, software, and product development teams. The ideal candidate is an organized leader who thrives in a fast-paced, innovative environment. This individual will be equally comfortable managing schedules and priorities from the office while also spending time on the production floor supporting technical problem-solving, product development, and engineering execution. This is a full-time position that is indefinite in duration with the potential and opportunity for professional growth, and additional opportunities within our organization. Duties: • Lead and coordinate cross-functional engineering projects involving hardware, software, and product development teams., • Develop and manage project plans, schedules, milestones, and deliverables to ensure projects are completed on time and within scope., • Track project progress, identify risks, and proactively resolve issues that could impact timelines or product performance., • Serve as the primary point of coordination between engineering disciplines, ensuring effective communication and collaboration throughout the development process., • Work closely with engineering leadership to prioritize projects, allocate resources, and balance competing initiatives., • Participate in product development activities, providing both technical and project management support as needed., • Spend time on the production floor supporting prototype builds, product validation, troubleshooting, and engineering improvements., • Collaborate with manufacturing, operations, and quality teams to ensure products are designed for manufacturability and successful production., • Facilitate design reviews, project status meetings, and cross-functional communication., • Maintain project documentation, schedules, action items, and engineering records., • Drive continuous improvement in engineering processes, project execution, and team collaboration. Requirements: • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Software Engineering, or a related technical discipline., • 5+ years of engineering experience with increasing responsibility in product development, project management, or engineering leadership., • Demonstrated experience leading cross-functional engineering projects from concept through implementation., • Strong project management and organizational skills with the ability to manage multiple priorities simultaneously., • Excellent communication and leadership skills with the ability to influence and coordinate multidisciplinary teams., • Comfortable working in both office and manufacturing environments., • Strong technical aptitude and willingness to remain engaged in hands-on engineering activities when needed. Why work for Productive Resources? Productive Resources is a full-service engineering firm with over two decades of experience serving leading global clients. Our expertise is project-based product development and manufacturing engineering support. Our primary focus industries are off highway equipment including agricultural, construction, defense, mining, recreational, industrial, and specialty machines. We lead with our reputation for quality, teamwork, and innovative solutions. We invest in our people, providing resources and opportunities for ongoing development. Our workplace fosters innovation, prioritizes the well-being of our team, and encourages creativity. Our diverse experience and client base will challenge your technical skills and provide greater opportunities for growth. We Offer Competitive Benefits: • Group Health, Dental and Vision Insurance, • Company Paid Life Insurance, • Voluntary Life, AD&D, and Disability Insurance available, • Voluntary Critical Illness and Accident Insurance available, • Long-Term Disability, • Short-term Disability, • Retirement Savings Account (Traditional 401k & Roth 401k), • Flexible Spending Plans for Medical Expenses and Dependent Care, • Health Savings Account (HSA) Programs available, • Health Care Flexible Spending Account (FSA) Plan, • Paid Time Off (PTO), • Health Care Support Program complimentary health advocacy program provides 24/7 assistance., • Adoption Assistance Program, • Employee Assistance Program (EAP), • Caregiver Support Programs, • Financial Wellbeing Support, • Commuter Benefits Program, • Training and Development Equal Opportunity and Veteran Friendly

Job Description Manufacturing Engineer (Machining) 1ST SHIFT · HEAVY MACHINING · MARINE & DEFENSE Riverside, Missouri · Full-Time · $90,000 – $105,000 / year + full benefits THE SHORT VERSION We build the machinery that moves ships. Steel plate comes in the door, and we burn it, fit it, weld it, and machine it into finished components that run 40,000 pounds and up for the commercial marine, defense, and mining industries. We need a Manufacturing Engineer on the machining side — horizontal boring mills, large lathes, and everything that surrounds them. This is a hands-on job. You will be in the office when you need to be and on the floor the rest of the time, with the machines and the people running them. We are not looking for someone to keep the process running the way it has always run. We have been at this since 1960, and some of what we do is proven and some of it is just old. We want an engineer who can tell the difference — who asks why we do it this way, goes and finds a better method, brings in the technology that makes it possible, and then does the work to make it stick. WHY YOU WOULD WANT THIS JOB ▪ Real ownership. Manufacturing Engineering is a team of six. Nobody is going to hand you a narrow slice of one process and tell you to stay in it. ▪ The parts are enormous. 40,000 pounds and up, low volume, high mix. Every job is a real engineering challenge, and a scrapped part is a big deal — which is exactly why the work matters. ▪ The work is real. Intercon has been building heavy equipment in Riverside since 1958. Our ATB couplers hold ocean-going tug-and-barge units together in open water and account for half of all US fuel movement by ocean. Our propulsion equipment supports U.S. Navy destroyers, aircraft carriers, and submarines. ▪ Stability. Nearly 70 years in business, approximately 125 people, and a large backlog in marine and defense. ▪ You can actually change things. Bring us a better method, a new piece of technology, or a process that should be retired, make the case, and you will get a real hearing. We are small enough that a good idea does not have to survive several layers of approval to happen. ▪ First shift, and it does not rotate. ▪ Full benefits: health, dental, and vision insurance; 401(k) with employer contribution; HSA or healthcare FSA; supplemental coverage; paid time off; and tuition reimbursement. ▪ Relocation assistance is possible for the right candidate. WHAT YOU WILL ACTUALLY BE DOING Owning the machining processes end to end — how the part gets made, how we prove it is right, and how we make it repeatable. In practice, that means: ▪ CNC programming. Developing, modifying, and reviewing G-code for horizontal boring mills, lathes, and other heavy equipment ▪ Machine characterization and optimization. Finding out what a machine can actually hold, then building the process around it ▪ Process documentation and control. PFMEAs, process control plans, work instructions, and engineering and process change control ▪ Tooling and equipment. Specifying tooling and equipment for efficient, high-quality production, and identifying capital purchases worth making ▪ Mechanical drawings in support of new and existing products ▪ Root cause and corrective action. Supporting investigations with your peers and leading the effort to cut scrap, rework, repair, and warranty cost ▪ Standard work. Creating it, training it, and driving it across shop floor processes ▪ Finding and bringing in what is next. Watching what is happening in tooling, workholding, automation, probing, metrology, and software, then deciding what is worth trialing here — and building the business case to get it in the door ▪ Floor layouts and implementation plans for major factory moves ▪ Technical support across the value stream, working directly with production, quality, suppliers, and customers You will often lead cross-functional groups of peers from production and quality to get a job out the door on time. Nobody on that team reports to you, so a consistent, analytical, show-your-work approach to decisions is how you get traction. Requirements ▪ Bachelor's degree in a related field, with experience in a manufacturing function ▪ Ability to read and interpret complex drawings ▪ Thorough understanding of GD&T ▪ Experience programming CNC controls using G-code ▪ Real experience with machining, part setup, cutting tools, and materials ▪ Proficient with Microsoft Office ▪ Comfortable working with minimal supervision — you will be trusted to set your own priorities ▪ A real bias toward improvement. “That is how we have always done it” should bother you, and you should be the kind of engineer who goes looking for the better way instead of waiting to be asked. ▪ Strong interpersonal skills. You will be talking to suppliers, customers, machinists, and engineers, often on the same day. If you are early in your career, apply anyway. You will notice there is no years-of-experience number on that list, and that is on purpose. A new engineer with a real work ethic, the humility to learn from the machinist who has been running that boring mill for thirty years, and the drive to keep asking why will go further here than a long résumé that stopped being curious a decade ago. Internship or co-op time in a manufacturing environment counts. Tell us what you have built, fixed, or figured out. Helpful, But Not Required ▪ Experience with APQP tools ▪ CAD/CAM software — we use Autodesk Inventor ▪ Tool path verification and simulation software ▪ Familiarity with weldments and fit-up processes ▪ Large-part, long-cycle, or low-volume machining experience ▪ Time in a defense, marine, or other regulated manufacturing environment We especially want to hear from you if you know machining cold and want to move into engineering, or you are an engineer coming out of high-volume work and are tired of optimizing the same part for the ten-thousandth time. And if you have ever been the person in the shop pushing for the new method, the new machine, or the new software — and got told no — come tell us what you were trying to do. WHO YOU WOULD WORK WITH You would join a Manufacturing Engineering team of six, reporting to the Manufacturing Engineering Manager alongside engineering technicians and a document control and support specialist. Manufacturing Engineering partners closely with Quality Assurance, and both groups report to the VP of Quality and Operational Excellence. WHERE THIS GOES Manufacturing Engineering sits at the center of this plant — you will touch every department and every program we run. That is a good place to build from, whether you want to go deeper technically or move toward leadership. If you want to grow, tell us and we will build the path. THE HONEST PART This role splits time between an office and a manufacturing floor. On the floor, standard PPE is required and you will be around heavy machinery, cranes, and large-scale parts, with occasional standing, bending, and moving about the floor for extended periods. The shop is hot in July and cold in January. Our machining operations run two shifts. This position is first shift, but on occasion you will come in early or stay late to support training or a hand-off with second shift. And one more thing worth saying plainly: change here is earned, not announced. Some of the people on this floor have been machining these parts longer than you have been alive, and they will listen to a good idea — but you will have to make the case, prove it out, and bring them with you. If that sounds like the fun part, you will like it here. Benefits · Paid time off · Health insurance · Dental insurance · Vision insurance · Healthcare FSA spending or reimbursement accounts · Supplemental insurance through Aflac · 401K with employer contribution This is a full-time, safety sensitive position. Intercontinental Engineering – Manufacturing Corporation is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law. ITAR Requirements: In order to comply with U.S. government regulations applicable to this position, all applicants must be either a U.S. Citizen, lawful permanent resident of the U.S.,as defined in 8 U.S.C. 1101 (a)(20) or a "protected individual", as defined by 8 U.S.C. 1324b(a)(3)

Job DescriptionOverview We are seeking a highly skilled and experienced Senior / Master Mechanical Assembly Technician to join our dynamic team in North Kansas City, MO. In this role, you will play a critical part in the assembly and integration of complex mechanical systems. If you have a passion for precision and a knack for problem-solving, we want to hear from you! Responsibilities • Assemble and test mechanical components and systems according to specifications and engineering drawings., • Conduct quality inspections and troubleshooting to ensure optimal performance and reliability., • Collaborate with engineers and other technicians to improve assembly processes and product designs., • Train and mentor junior technicians, sharing your expertise and best practices., • Maintain accurate documentation of assembly processes and quality control measures., • Adhere to safety protocols and maintain a clean and organized work environment., • Participate in continuous improvement initiatives to enhance efficiency and reduce waste. Qualifications, • High school diploma or equivalent; technical degree or certification in mechanical assembly preferred., • Minimum of 5 years of experience in mechanical assembly, with a focus on complex systems., • Strong understanding of mechanical principles, tools, and assembly techniques., • Proficient in reading and interpreting engineering drawings and specifications., • Excellent problem-solving skills and attention to detail., • Ability to work independently as well as part of a team., • Strong communication skills and a positive attitude. About Express Employment Professionals Express Employment Professionals is one of the leading staffing companies in the U.S. and Canada, with over750 franchise locations. We connect job seekers withfull-time, temporary, and part-time opportunitiesacross a wide range of industries including manufacturing, skilled trades, professional, and administrative roles. Express Employment Professionals is an Equal Opportunity Employer (M/F/D/V). You should be proficient in: • Mechanical Troubleshooting Skills, • Hydraulics Experience, • Mechanical Testing, • Industrial Electrical Experience, • Mechanical Assembly Skills, • Industrial Electrical Systems, • Hydraulic Systems & Components, • Mechanical Systems & Component Repair

Job DescriptionWe’re seeking an experienced product development Systems Engineer who can think big-picture while staying hands-on across diverse technologies. You’ll define user needs, drive system‑level requirements, and unite electrical, mechanical, and software disciplines into cohesive products. Acting as the connective tissue across designers, engineers, and clients, you’ll navigate tradeoffs, manage risk, and tackle complex integration challenges to deliver life‑changing medical and high‑tech products. What You’ll Do: • Maintain the System View: Act as the holistic thinker for the product—maintaining a clear mental model of the system, identifying roadblocks early, and guide the team toward effective solutions., • Lead Cross-Functional Integration: Coordinate electrical, mechanical, software, industrial design, and test workstreams to ensure the product functions as a cohesive system., • Drive Requirements & Traceability: Lead the definition of user needs and product requirements, maintaining clear traceability from requirements to design decisions, risk management, and verification., • Own Risk Management: Proactively identify, prioritize, document, and manage technical and program risks, working closely with the design team to develop and execute mitigation strategies., • Act as a Technical Investigator: Use prototypes, proof-of-concept builds, and engineering testing to validate concepts and inform design direction., • Enable Informed Decisions: Communicate system architecture, progress, risks, and tradeoffs clearly to teams and clients, empowering confident design decisions., • Guide Compliance & Documentation: Ensure development follows the governing QMS and regulatory standards while maintaining a right-sized Design Development File. Position Details: This is a full-time, permanent position. This leadership position is based in our Kansas City design center, and not available as a remote job. Qualifications: • 5+ years of applicable experience in electromechanical/embedded system product development, • Degree in a relevant engineering background (e.g Biomedical, Mechanical, Electrical, Software), or equivalant experience., • Experience interpreting and applying medical device standards such as ISO 60601-1, ISO 13485 etc., or similar experience in a regulated industryNice to haves:, • Experience leading cross-functional teams of engineers and designers While we recognize that top talent comes from all over the world, we are a small team and are not able to offer visa sponsorship at this time. Candidates must be authorized to work in the United States without requiring visa sponsorship Powered by JazzHR O0TQjbIxFf

Job Description Cogent, Inc., is seeking a Control Systems Engineer to join our team in Kansas City. The Control Systems Engineer quotes, designs, programs, and supports innovative industrial control systems, from initial concept through commissioning. This role works closely with engineers, fabricators, and field service teams to ensure reliable, high-performance automation solutions that meet customer requirements, safety standards, and performance expectations. You’ll bring together your knowledge of controls hardware, PLC/HMI programming, and process integration to deliver systems that help our customers operate smarter, safer, and more efficiently. • Design and develop industrial control systems, including hardware selection, schematic design, and programming., • Develop PLC, HMI, and SCADA applications using industry-standard platforms., • Prepare system specifications, I/O lists, and documentation packages., • Coordinate with mechanical, electrical, and software engineering teams for seamless system integration., • Provide technical support for control panel fabrication, wiring, and testing., • Conduct on-site or remote system commissioning, testing, and operator training., • Assist with project management tasks — scope definition, quoting, scheduling, and budget tracking., • Support sales and estimating teams with control system concepts and scope development., • Troubleshoot system and instrumentation issues to ensure reliable operation., • Contribute to standardization and continuous improvement of Cogent’s design and engineering practices. Work Environment/Travel Expectations This position offers a mix of office and field-based work to support diverse project needs. Typical allocation includes approximately 40% on-site (customer or field locations), 60% in-office, and up to 20% overnight travel for commissioning, training, or project support as needed. Minimum Qualifications • Bachelor’s degree in Engineering or a Technical Degree with equivalent experience., • Experience in industrial control system design, programming, and integration., • Working knowledge of PLC and HMI platforms (Allen-Bradley preferred)., • Strong understanding of control circuits, instrumentation, and VFD integration., • Familiarity with AutoCAD or AutoCAD Electrical for schematic design., • Excellent communication, time management, and interpersonal skills., • Valid driver’s license and ability to travel as project needs require. Preferred Qualifications • Experience with SCADA and historian systems., • Familiarity with UL 508A control panel standards and electrical safety codes., • Experience in water/wastewater or process automation industries., • Ability to manage multiple concurrent projects with shifting priorities., • Strong problem-solving and analytical skills. Why Work with Us? Cogent is a growing organization with a long-term focus on delivering engineered solutions, equipment sales, repair services, installation, and proactive system support. We are driven by a mission to minimize customer downtime, improve system efficiency, and deliver the best long-term value. At Cogent, you’re not just an employee—you’re an owner. Our employee stock ownership plan (ESOP) empowers every team member to think and act like a business partner. Your contributions matter here. We Offer • Employee Ownership (ESOP) – Share in our success, • 401(k) with Company Match, • Profit-Sharing Bonuses, • Medical, Dental, Vision & Life Insurance, • Generous PTO, Paid Holidays & Volunteer Time Off, • Career Development & Advancement Opportunities, • A Collaborative Culture that Values Innovation and Accountability Join Us At Cogent, we believe the best solutions come from empowered people. If you’re passionate about engineering excellence and thrive in a team-focused environment that values ownership, innovation, and integrity — we want to hear from you! Apply today and help us build something exceptional — together!

Job Description American Concrete Products is a leading manufacturer of quality concrete products for various industries. We are currently seeking a Project Coordinator that will provide operations and customer service support function(s). Primary Objective: Provide administrative support to Project Management team, and ensure accurate and timely flow of delivery paperwork, scheduling and ERP order maintenance Critical Job Functions: • Coordinates release work with Sales, Project Managers and Operations personnel to execute delivery schedules., • Master the fundamentals of Sales Order entry in X3 ERP, part creation, purchase requisitions, and part maintenance., • Enter sales orders into ERP system, print and email delivery tickets, BOL’s, product labels and related yard/QC paperwork., • Create Purchase Orders (P.O.) and timely issuance of P.O.’s to vendors to avoid delaying contractual schedule deadlines, • Executes daily production entry reports, receiving and issuing raw materials, inventory management and cycle counting., • Create and submit timely Customer Invoices, reconcile all external billings, and project financials to avoid over/under billing, • Assists with contracting outside trucking broker(s) to configure products, sequence and assign load/unload at plant and jobsite., • Answer and return internal & external customer phone calls in a timely manner and handle issues swiftly and professionally., • Balance relationships with Sales, Operations, and other Project Managers to achieve accountability and desired outcomes. Attributes • Resourceful and information seeking, does not assume information will be provided to perform critical tasks., • Demonstrate ability to problem solve, think quickly and respond to Customers in a timely manner., • Displays a sense of urgency and professionalism when handling difficult Customer service issues or requests., • Ability to self-manage priorities and follow up with internal and external Customers., • Displays pride in work product and work ethic, strives to meet or exceed expectations and achieve results., • Self-starter who is engaged and interested in actively learning about the company’s products and processes., • Demonstrate enthusiasm and professionalism in every aspect of Customer and intercompany relations. Requirements • Strong communication skills (verbal and written), • Strong analytical/critical thinking skills, • Manufacturing, engineering, mechanical and/or electrical control experience a plus., • Associates degree or equivalent vocational training., • Strong computer experience and knowledge in MS Suite (Word, Excel, PowerPoint), Microsoft Sharepoint. Benefits • FULLTIME YEAR-ROUND WORK, • Medical, Dental & Vision Benefit’s after 60 Days, • Competitive Compensation & Profit Sharing, • Available Over Time, • 401K with Match, • Internal promotional opportunities, • Company Sustainability – Since 1940 Enterprise Properties, Inc. and its subsidiaries are an equal opportunity employer that complies with EEOC rules and regulations. American Concrete Products is part of the Enterprise Properties, Inc Family Pre-Employment Drug Screen, Criminal Background check, Reference check & Employment Verification are all part of our hiring process. #ACPKS2021

Job DescriptionDescription: P1 Service, LLC., is seeking Operating Engineers to work at Saint Luke's Health System in Kansas City, Missouri. Join our P1 Team! P1 Service, LLC., part of the BCTS family of facility solutions providers, provides customers with the best in HVAC, mechanical, electrical, and plumbing service. Our turn-key solutions for all types of building solutions in a variety of markets has made P1 Service one of the top contractors in the nation. When you work for P1 Service, you'll be part of a culture that puts safety first, treats associates like family, and provides challenging work in a rewarding, energetic environment. P1 Service takes pride in maintaining a high standard of excellence along with an ethical and friendly business culture. P1 Service, LLC. is an equal opportunity employer. All qualified applicants will receive consideration for employment, regardless of status, including status as a protected veteran or as an individual with a disability. We offer a competitive compensation package. Summary & Nature of Work: The Operating Engineer is responsible for inspecting, testing and performing Operations & Maintenance (O&M) preventative maintenance inspections on mechanical, electrical and automatic temperature control equipment utilizing results-oriented strategies to ensure continuing operation. Some judgment is necessary to determine when assistance is needed. The incumbent directly contributes to the success of the company by maintaining the facility through preventative maintenance and assigned maintenance tasks. Essential Duties: • Operate and maintain stationary engines and equipment such as boilers, air compressors, generators, chillers and air handlers., • Inspect and diagnose mechanical and electrical systems using a variety of tools and instruments., • Performs specified preventative maintenance including belt adjustments, oiling, greasing and cleaning of equipment., • Perform prescribed non-destructive tests; collect and deliver samples for analysis., • Records data (temperature, hours of operation, fuel consumption, water levels, etc), reading dials, gauges and manuals., • Document all work performed in the CMMS system., • Communicate with the vendor, or the vendor's representative, on the work performed and present status of the mechanical system., • Interpret engineering drawings in reference to layout, location and operation of the system(s)., • Ability to oversee and work on utility distribution equipment and as needed., • Respond to identified customer needs., • Performs all work in accordance with established code and safety procedures., • All other duties as assigned. Required Education and Experience • High school diploma or equivalent., • Must have a minimum of 3-5 years' experience as an Operating Engineer., • Intermediate level of knowledge on HVAC, plumbing and electrical equipment., • Must have a CFC Universal certification for safe handling of refrigerants, or be able to get one within 90 days of awarded position., • Must have a valid Class E or higher Driver's License. Driving may be a requirement of this position. If so, an acceptable DMV record is required., • Good computer and tablet skills required., • Ability to read and interpret blueprints and engineering drawings>, • Previous customer service skills., • Annual flu vaccination or medical proof of flu vaccine allergy is required. Preferred Education and Experience • Technical degree in HVAC, electrical, plumbing, electrical or related field, • Advanced certifications in mechanical or electrical systems, • Experience with CMMS systems, • Strong mathematical skills including construction/engineering mathematics Additional Eligibility Qualifications Must be able to satisfactorily pass a criminal background check and drug screen as required by facility policies. Ready to Join Our Team? If you're passionate about building client relationships while delivering exceptional services, we want to hear from you! To Apply: Visit our website at https://p1-service.com/careers If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting Human Resources: email HRSupport@p1-service.com or call: 913-303-9033 Requirements:

Job Description Senior Design Engineer Lenexa, KS – Full Time Productive Resources (www.productiveresources.com) is seeking a candidate to be part of our engineering team at our customer's facility in Lenexa, KS. As a member of our team, the selected candidate will leverage their extensive experience to lead and execute complex engineering projects, mentor junior and mid-level engineers, and contribute to the innovation and technical growth of the team. You will take ownership of design, development, and optimization tasks, ensuring that solutions are efficient, scalable, and meet all regulatory and industry standards. The Senior Design Engineer owns the mechanical design of our robot platform and supports equipment from concept through validated prototype — and stays accountable through seasonal production cycles. This is a full-time position that is indefinite in duration with the opportunity of professional growth, and additional opportunities within our organization. Duties: • Own mechanical design of new systems and subsystems — from requirements and architecture through detailed CAD, tolerance analysis, and released drawings., • Document Control- demonstrates ownership and organization for files that are created ensuring that CAD files, requirements documents and design document revisions produced are organized and managed throughout lifecycle., • Ensure our BOMs and documents are updated and accurate - we move fast, but with accuracy., • Design for the field: soil abrasion, vibration, dust ingress, impact, and thermal cycling are your test cases, not edge cases., • Apply a DFMEA approach and robust design to predict and protect from edge cases and failure modes., • Build and instrument test rigs; develop test/DVP&R plans and run validation protocols in the field alongside our operations team; document failure modes and own the fix., • Work tightly with software and electrical engineers to integrate sensors, actuators, and control systems into mechanical designs., • Conduct tolerance stack-up calculations and identify critical to quality(CTQ) tolerance call outs while producing DFM-ready drawing packages for our manufacturing partner; own the design through first-article inspection., • Feed field failure data back into the design — close the loop on what breaks and why utilizing first principles and solid engineering judgment., • Apply root cause corrective actions process RCCA or FRACAS while documenting the cycles of learning., • Mentor junior engineers; set the standard for design rigor on the hardware team. Requirements: • 7+ years of mechanical design experience., • Background in off-highway vehicles, automotive, agricultural equipment, or industrial vehicles —required., • Proficiency in 3D CAD (SolidWorks strongly preferred); GD&T, tolerance stack-up analysis, and DFM for external manufacturing., • Experience taking a design from prototype through production drawing release — not just design validation., • Hands-on with physical hardware: you have built things, tested them in the field, watched them fail, and redesigned them., • Working knowledge of FEA and structural analysis experience preferred., • Degree in Mechanical Engineering or a closely related field., • Proven toughness - changing the world is not for the faint of heart., • Designs for where the machine actually runs, not where it’s supposed to run., • Takes direct feedback - both positive and negative - owns it, and addresses it., • Comfortable owning a design end to end with limited oversight — we are a small team., • Experience (personal or professional) working on or near a farm is a strong plus. As a condition of employment consideration, Productive Resources conducts pre-employment screening, including a background check and drug test. In addition, an employment candidate is required to provide proof of identity and legal authority to work in the United States. Why work for Productive Resources? Productive Resources is a full-service engineering firm with over two decades of experience serving leading global clients. Our expertise is project-based product development and manufacturing engineering support. Our primary focus industries are off highway equipment including agricultural, construction, defense, mining, recreational, industrial, and specialty machines. We lead with our reputation for quality, teamwork, and innovative solutions. We invest in our people, providing resources and opportunities for ongoing development. Our workplace fosters innovation, prioritizes the well-being of our team, and encourages creativity. Our diverse experience and client base will challenge your technical skills and provide greater opportunities for growth. We Offer Competitive Benefits: • Group Health, Dental and Vision Insurance, • Company Paid Life Insurance, • Voluntary Life, AD&D, and Disability Insurance available, • Voluntary Critical Illness and Accident Insurance available, • Long-Term Disability, • Short-term Disability, • Retirement Savings Account (Traditional 401k & Roth 401k), • Flexible Spending Plans for Medical Expenses and Dependent Care, • Health Savings Account (HSA) Programs available, • Health Care Flexible Spending Account (FSA) Plan, • Paid Time Off (PTO), • Health Care Support Program complimentary health advocacy program provides 24/7 assistance., • Adoption Assistance Program, • Employee Assistance Program (EAP), • Caregiver Support Programs, • Financial Wellbeing Support, • Commuter Benefits Program, • Training and Development Equal Opportunity and Veteran Friendly

Job Description Title: Mechanical Engineer - Entry Level Location: GE Transportation (A Wabtec Company) - Kansas City, MO Job Description: The Design Engineer (DE) is responsible for the technical/engineering of the assigned projects in terms of scope, timely delivery, quality, and compliance. The DE will interface with respective Internal and External businesses and suppliers to execute assigned projects. The candidate should have a solid engineering background and proven experience with leading various manufacturing and assembly projects. Additional design experience with locomotives and off-highway vehicles a plus. Essential Responsibilities: • Works within defined parameters to make decisions and apply concepts to issues of high complexity., • Provides direction and assistance to the engineering team in order to meet assigned objectives., • Document technical data generated by the assigned project consistent with engineering policies and procedures., • Participate as a presenter or reviewer in technical and program reviews, • Develops and fulfills the engineering planning for the assigned projects., • Attends/leads customer meetings (kick off, toll gates and final close out etc.)., • Supports the advanced design and development of mechanical components., • Drive cross-functional teams to execute on critical project milestones, including but not limited to, Design Reviews, material orders, prototype builds, field testing and launch. Desired Skills: • Experience with managing multiple projects simultaneously., • Strong interpersonal and leadership abilities., • Experience with GD&T, general mfg processes, tooling and Six Sigma., • Knowledge of mechanical design and advanced manufacturing processes., • Experience working in ANSYS/COSMOS and/or other commercially available FEA programs as well as 3D modeling (UG or Solid Works), a plus., • Knowledge of Reliability data analysis through statistical modeling., • Familiarity with hydraulic and or thermal systems a bonus skill set. Qualifications/Requirements: Bachelor of Science in Engineering. Benefits: We offer an attractive compensation and benefits package, including health, dental, STD, LTD, Life, IRA with generous company match, paid Holidays, vacation and more. Our global commitment to technological advancement offers opportunities for personal growth and development in a stable, supportive work environment. http://phoenixtechnology.com/

Job Description Our client is seeking a hands-on Controls Engineer to design, program, integrate, commission, and support industrial automation systems. This role is ideal for an Automation Engineer, PLC Programmer, Control Systems Engineer, or Systems Integration Engineer who enjoys seeing projects through from concept and design to startup, troubleshooting, and customer training. You will work with PLCs, HMIs, SCADA platforms, VFDs, instrumentation, control panels, and industrial electrical systems to deliver reliable automation solutions for industrial and process applications. Controls Engineer Responsibilities • Design and develop industrial control systems, including control panel hardware selection, electrical schematics, I/O lists, and programming., • Program, troubleshoot, and support PLC, HMI, and SCADA applications using industry-standard automation platforms., • Develop control system specifications, sequence-of-operations documents, bill of materials, and complete electrical documentation packages., • Select and integrate PLCs, HMIs, VFDs, motor controls, instrumentation, sensors, relays, power supplies, and other industrial control components., • Create and revise electrical schematics using AutoCAD or AutoCAD Electrical., • Collaborate with mechanical, electrical, fabrication, engineering, and field service teams to ensure successful system integration., • Support control panel fabrication, wiring, factory acceptance testing, functional testing, and quality review., • Perform on-site and remote commissioning, startup, troubleshooting, system testing, and operator training., • Diagnose issues involving PLC logic, HMI screens, SCADA communications, instrumentation, VFDs, motor controls, electrical circuits, and process equipment., • Assist with project scoping, estimating, quoting, scheduling, budget tracking, and resource coordination., • Support sales and estimating teams by developing preliminary control concepts, system requirements, and technical project scopes., • Maintain accurate project documentation and support continuous improvement of engineering standards, templates, and design practices., • Ensure control system designs and installations meet customer requirements, safety expectations, applicable electrical codes, and performance standards. Work Environment & Travel • Approximately 60% office-based engineering, programming, design, and project coordination, • Approximately 40% customer-site, field, startup, and commissioning work, • Up to 20% overnight travel for project commissioning, troubleshooting, training, and customer support, • Travel is negligible and regional with most clients based within 300-mile radius Preferred Qualifications • Bachelor's degree in Engineering, Electrical Engineering, Automation, Controls, or a related discipline; equivalent technical education and relevant experience will also be considered., • Experience designing, programming, commissioning, or supporting industrial control systems., • Working knowledge of PLC and HMI programming; Allen-Bradley / Rockwell Automation experience is strongly preferred., • Experience with industrial automation components including PLCs, HMIs, VFDs, motor controls, instrumentation, sensors, and control panels., • Ability to read, create, and interpret electrical drawings, wiring diagrams, control schematics, P&IDs, and equipment specifications., • Experience using AutoCAD or AutoCAD Electrical for electrical schematic design., • Strong troubleshooting ability involving industrial electrical systems, instrumentation, automation controls, and process equipment., • Excellent communication, organization, time-management, and customer-facing skills., • Valid driver's license and ability to travel based on project needs. Preferred Experience • SCADA development, historian systems, data collection, industrial networking, or telemetry systems., • Experience with FactoryTalk, Studio 5000, Logix Designer, PanelView, Ignition, Wonderware, VTScada, or similar automation platforms., • Familiarity with Ethernet/IP, Modbus, serial communications, managed switches, remote I/O, and industrial networks., • Knowledge of UL 508A control panel standards, NFPA 70, NFPA 79, NEC, and electrical safety practices., • Experience in industrial process automation, manufacturing automation, pumping systems, municipal utilities, or related applications., • Ability to manage multiple engineering projects, shifting priorities, deadlines, and customer expectations. Benefits • Employee ownership opportunity, • 401(k) with company match, • Profit-sharing bonus potential, • Medical, dental, vision, and life insurance, • Paid time off, paid holidays, and volunteer time off, • Career development and advancement opportunities, • Collaborative culture focused on innovation, accountability, and technical growth

Job Description Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is: • 100% employee-owned with 40+ years of industry history, • A Top 5 Systems Integrator Giant, • ENR Top 500 Firm We have a Controls/ Robotics Engineer position available in our Kansas City location. This position is responsible for controls engineering project requirements involving PLC / Servo Control System programming, HMI/SCADA programming, control panel design, instrumentation specification, check-out support, commissioning, and field service of control systems. Major Responsibilities • This position requires the Controls Engineer to conceptualize, detail and implement control systems for industrial processes and machinery that meet our client’s requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC, PAx, Servo Systems), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the client’s facility, • Project management skills and the ability to self-manage even complex projects; excellent time management and multitasking; flexibility in work environments and schedules; strong written and oral communication skills, essential to building and maintaining good work and customer relationships, • Firm grasp of controller programming languages including, but not exclusive to: Function Block, Ladder, Sequential Function Chart, Structured Text and others to achieve the desired results is required, • MS-SQL database management and the ability to program database scripts (C++ Programming), • Develops schematics detailing control system configuration and wiring, and design equipment panel layouts on AutoCAD software, • Design network architecture for control systems to interface with multiple communication protocols such as: Ethernet/IP, Profinet, Modbus, etc., • Develop procedural documentation for instrumentation and hardware configurations, • Write operational philosophy and sequence of operation documents for control system implementation, • Will assist with initial start-up and debug integrated systems and the development of system documentation Minimum Requirements Education Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. An AA in Engineering Technology or equivalent with equivalent experience may be substituted. Experience Four to Fifteen years with capabilities in below areas is preferred: • Experience in one or more of the following industries: Food and Beverage, Building Management Systems, Oil & Gas, Grain Handling or Wood Products, • Experience in the basic safety requirements and processes within the industries noted above, • In-depth understanding of PLC, PAx, Servo System hardware/software platforms such Rockwell Automation, Siemens S7 / T3000, Modicon, Kinetix Servo Systems, • In-depth understanding of HMI/SCADA hardware/software platforms such as Wonderware System Platform, Rockwell FactoryTalk, GE Cimplicity, GE iFIX, Ignition, Citect, etc., • In-depth understanding of SQL database table creation, scripting, and transactional data management, • Experience in the design of electrical schematics, including power distribution at the 600-480VAC level, control panels and associated NEC references, Ethernet networking and architecture, serial communications, etc., • Understanding of auxiliary equipment in an electrical generating or plant environment: generator excitation control systems, protective relaying, industrial motor controls and VFDs, etc., • Experience in using hand and power tools to build, assemble, and wire industrial control panels, • Experience with AutoCAD LT / AutoCAD Electrical is also desired, • Must have a valid driver’s license and passport with the desire and ability to travel up to 30%, including internationally Physical Demands of Position Seeing, color perception, hearing and clear speech, dexterity in hands, driving, lifting, climbing, and ability to mount and dismount equipment, pushing, and pulling. Working Environment Standard office environment, on-site office environment, and diverse industrial environments, frequent PC usage, facsimile/copy machines, phones. *Job Descriptions are not exhaustive lists of all skills, responsibilities, or efforts associated with a job. They reflect principal job elements essential for performing the job and evaluating performance. Wunderlich-Malec is proud to offer a comprehensive employee-owner benefit package. Full-time employees may be eligible for the following benefits: Medical • Dental • Vision • Basic and Supplemental Life and AD&D • Long Term Disability • Voluntary Short Term Disability • Healthcare & Dependent Care Flexible Spending Accounts • Health Savings Account • Paid Time Off (PTO) • Paid Holidays • Tuition Reimbursement • Referral Bonus Program • 401(k)/Profit Sharing • 100% ESOP (Employee Stock Ownership Plan) • Employee Assistance Program • Will Preparation Resources • Worldwide Travel Assistance #LI-Hybrid #LI-WM1

Job DescriptionTECHNICAL PROJECT MANAGER The Engenious Technical Project Manager traverses multiple disciplines advancing the project by all possible means. Efficiency might be their middle name. They are a 10 on the attention-to-detail scale and constantly notice details that others miss. Technical acumen and ability to figure things out is a must! They thrive on variety, sense of urgency, and don’t need an instruction book. They can collaborate better than synchronized swimmers while acting as stabilizing and forward-thinking influencers amidst the ups and downs of product development. This is a role well suited to an ambitious professional, looking for the next step in their career. Key Responsibilities: • Lead The Projects by efficiently creating a project plan and do anything to advance the project along!, • Quickly Learn About the Medical Device Industry working on experimental medical devices and applying your existing expertise to great use, • Work in a Close Team with Electrical, Mechanical, Software, and Test Engineers, concepting, designing, debugging, and analyzing, • Develop New Products from concept to commercialization, be part of creating new medical devices and electromechanical products, • Manage Schedule and Budgets by keeping design projects moving forward toward fast and successful completion, • Be In the Mix on Technical Challenges by contacting the customer and internal team for efficient resolution, • Foster A Collaborative, team problem-solving culture, • Demonstrate Tact and Maturity when dealing with a wide variety of people, act as a mature, stabilizing influence, • Exhibit Excellent Communication skills, • Exemplify A High Level of Situational Awareness (self-aware and others-aware), • Cultivate A Sense of Urgency, importance, and attention to detail across all aspects of our work, • Maintain Team Focus on the right things and change focus when necessary Position Details: • This is a full-time, permanent position. This position works from our Kansas City based office during core business hours. Required skills to have for the success of this role: • Ability to lead a team of engineers and designers to deliver on product development commitments, • Degree in a relevant engineering background (e.g Biomedical, Mechanical, Electrical, Software), or equivalent experience., • Experience in new product development with a demonstrable record of bringing product to market, • A few years of experience in new product development (as engineer or technical lead), • Demonstrated experience and success in leading medium and large, sophisticated projects/programs, • Excellent leadership, communication, and interpersonal skills, with demonstrated abilities to flourish in a fast paced, problem-solving environment. Nice to Haves: • Medical device experience is preferred but any product development experience is applicable. Powered by JazzHR a79mOtzANK

Job Description Data Center Construction Project Manager - Owner's Rep - Kansas City, MO This opportunity is with a leading provider of mission-critical data center solutions as a Managed Services Provider as an Owner's Rep for Construction Services. This firm provides a complete life cycle of solutions that are custom-fit to the requirements of their client's mission-critical facilities. This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. They build mission-critical facilities for data center facilities nationwide for Enterprise, Colocation and Hyperscale Companies. We are looking for a Data Center Construction Project Manager to support critical facility construction projects. The Construction PM will be responsible for all aspects of managing a data center construction projects, upgrades and retrofits in a production environment and act on the Owner's behalf. This will include providing leadership to contractors and vendors associated with the delivery of company projects. The candidate will have overall responsibility for the delivery of assigned projects on budget on time and assurance that the project scope and quality meet Company Design Standards and the objectives set for the project. The successful candidate will have to be exceptionally organized and be great with back office work (change orders, budgets, paperwork driven, etc.) Responsibilities: • Maintain liaison with various contractors and vendors in order to manage the day to day activities that impact the delivery of company's critical facilities construction projects, • Ensure that all day to day project responsibilities are met by the contractors and vendors on the project, • Manage projects such as greenfields, brownfields, upgrades, or retrofits of data centers, • Responsible for negotiating contracts with vendors as necessary. Responsible for creating and managing project schedules, • Put together Project plans – size up, costs, budget, scheduling, timeline, manage change orders, etc., • Assists with reporting and RFPs to Contractors, • Deliver Built to Suit projects with a heavy emphasis on value-engineering, • Drive Company Standards uniformly as it regards to Project Delivery by all project participants on all projects, • Identify, manage and mitigate areas of concern regarding potential liabilities and risk (fee, company reputation, errors and omissions, etc.) to Management and Region Manager, • Manage financial aspects of contracts (progress billing, rental equipment, income / expenses) to protect the company's interest and simultaneously maintain good relationship with the client, • Represent the company in project meetings, • Act as key Liaison with managers of all company departments, • Maintain all logs required to track the progress of the project Qualifications: • BA / BS a plus, • Experience managing Data Center Construction Projects as an Owner or as a General Contractor, • Data Center Project experience involving retrofits, upgrades, and capital improvement projects in a live data center environment, • Must be familiar with the design process of building systems for data center and mission critical projects, • Experience managing budgets, • Minimum of 10 years relevant experience in the Data Center Construction Industry, • Belong and Attend professional organizations such as AFCOM, ASHRAE, 7x24 exchange, PTC, Datacenterdynamics / DCD, Uptime, iMasons, Bisnow etc., • Client Facing /Client relationship / Client Management skills, • Solid Construction Project Management experience, • Effective Communicator – emails, phone and face to face, • Ability to work independently, • Travel as needed to project sites, • Solid Admin skills, • Computer savvy: MS Project, Excel, P6 Oracle Primavera, AutoCAD a plus, • Previous experience in the Military / Military Veterans a huge plus! Experience with Electrical / Mechanical: Navy nukes - EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc. Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: 9uhoshfdp4rsujt5hq6jr48pkc@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionDo you believe no challenge is too complex to solve? You’ll fit right in at U.S. Engineering. We deliver award-winning mechanical contracting, construction, service, and maintenance solutions with a focus on performance and innovation. Our team of skilled and collaborative professionals drives every project from preconstruction through final testing, always aligned with our clients’ goals. Corporate Counsel U.S. Engineering Holdings is seeking a Corporate Counsel to join its Legal & Risk Management Department and work directly with the General Counsel. This role will provide day-to-day legal support across the company's subsidiaries, with a primary focus on contract review, corporate filings, and claims-related matters (workers' compensation and insurance). This is an excellent opportunity for an attorney early in their career who wants hands-on, high-volume exposure to construction law, risk management, and corporate practice inside a growing organization. Principal Duties and Accountabilities: • Review, draft, and redline commercial construction contracts, subcontracts, and related agreements (AIA, Consensus Docs, and custom forms), flagging risk and negotiating terms alongside the General Counsel, • Prepare, file, and maintain corporate filings and entity records across U.S. Engineering's subsidiaries, • Support workers' compensation claims, including coordination with adjusters, claims tracking, and internal reporting, • Assist with general liability, property, and other insurance claims, including coverage analysis and claims correspondence, • Provide legal support on employment matters as needed, in coordination with HR and the General Counsel, • Help track and manage project-level legal risk, including claims, change orders, and disputes on active construction projects, • Assist with internal legal training materials and compliance initiatives for project teams and leadership, • Perform legal research and prepare memos on contract, insurance, and construction law issues as assignedEducation:, • J.D. from an accredited law school; active license to practice law in Missouri (or eligibility for reciprocity/admission)Experience:, • 2–5 years of relevant legal experience, in a law firm, corporate legal department, or construction/insurance setting, • Strong contract drafting and review skills, with attention to detail, • Ability to manage multiple matters independently and prioritize under deadline pressure, • Clear, practical communication style — comfortable working directly with non-lawyer business partners (PMs, PEs, Directors)Knowledge, skills, and abilities:, • Knowledge of contract law and commercial construction contracting principles., • Knowledge of corporate governance, entity management, and regulatory filing requirements., • Knowledge of workers' compensation, general liability, and insurance claims processes., • Knowledge of employment law principles and legal compliance requirements., • Understanding of construction industry practices, project delivery methods, and risk allocation., • Knowledge of legal research methods and legal writing standards., • Strong legal drafting, contract review, and negotiation skills., • Excellent legal research, analytical, and problem-solving abilities., • Ability to identify legal and business risks and recommend practical solutions., • Strong organizational and project management skills with the ability to manage multiple priorities simultaneously., • Effective written and verbal communication skills, including the ability to explain complex legal concepts to non-legal audiences., • Proficiency with Microsoft 365 applications and legal document management systems., • Strong attention to detail while maintaining efficiency in a fast-paced environment., • Ability to maintain confidentiality and exercise sound professional judgment., • Ability to interpret contracts, statutes, regulations, and legal precedents., • Ability to work independently with minimal supervision while collaborating effectively with cross-functional teams., • Ability to build trusted relationships with internal stakeholders at all organizational levels., • Ability to prioritize competing legal matters and meet deadlines in a dynamic business environment., • Ability to negotiate effectively while maintaining positive business relationships., • Ability to adapt to changing business priorities and legal requirements., • Ability to exercise discretion when handling confidential and privileged information.Physical and/or Travel Demands, • Primarily performs work in a professional office environment., • Frequently sits for extended periods while reviewing legal documents and working at a computer., • Regular use of a computer, keyboard, telephone, and other standard office equipment., • Frequently communicates verbally and in writing with internal stakeholders, outside counsel, insurance carriers, and business partners., • Occasionally lifts or moves materials weighing up to 20 pounds., • Ability to attend meetings throughout company facilities as needed. Travel Requirements, • Occasional travel (up to 10%) to company offices, project sites, mediations, depositions, legal proceedings, or professional development events., • Occasional overnight travel may be required based on business needs.Benefits and Compensation:, • The range for this position has been established at $100K to $142K salary and is U.S. Engineering good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be based on a variety of factors, including but not limited to internal equity, experience, education, specialty, and training., • Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package, including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line.This position will be posted until August 31st 2026 To apply, please visit https://www.usengineering.com/careers/job-postings/. Candidates must be legally authorized to work in the United States on a full-time basis without requiring future sponsorship for employment visa status. U.S. Engineering is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities and job specifications required of employees so classified. U.S. Engineering reserves the right to revise as needed. The job description does not constitute a written or implied contract of employment. Powered by JazzHR RQ9BoX9pyZ

Job DescriptionElevator / Vertical Transportation SpecialistFederal & Mission-Critical Infrastructure Projects Kansas City, MO| Full-Time Contract | On-Site | $120,000–$140,000 Support Critical Federal Infrastructure We are seeking an experienced Elevator / Vertical Transportation Specialist to support federal and mission-critical facilities throughout the Boston region.In this role, you’ll serve as a technical expert responsible for elevator and vertical transportation systems, supporting facility safety, operational reliability, inspections, modernization efforts, and compliance across multiple federal sites.This is a long-term, on-site contract opportunity offering meaningful project work, regional exposure, and the opportunity to support high-visibility federal infrastructure programs. What We Offer Compensation & Benefits • $120,000–$140,000 annual compensation, • Health, dental, and vision coverage, • Retirement plan with employer contribution, • PTO and paid holidays, • Short- and long-term disability coverageCareer Growth, • Long-term federal project stability, • Exposure to mission-critical facilities, • Opportunity to serve as a regional technical SME, • Collaborative team environment Key Responsibilities • Inspect elevator and vertical transportation systems across multiple facilities, • Conduct condition assessments and recommend repairs or modernization solutions, • Review contractor proposals, designs, and technical deliverables, • Support inspections, testing, maintenance, and operational performance tracking, • Provide technical guidance to contractors, facility teams, and stakeholders, • Prepare reports, documentation, and cost recommendations, • Participate in design reviews, testing, and project acceptance activities -Develop independent cost estimates (IGEs) -Manage all aspects of the regional Vertical Transportation Program as it pertains to the National Computerized Maintenance Management System Qualifications Required • Bachelor’s degree in Mechanical, Electrical, Energy Engineering, or related field, • Certified Elevator Inspector (QEI certification required), • Strong knowledge of elevator systems, ASME codes, and maintenance practices, • Ability to interpret technical documents and contractor submissions, • Strong communication and coordination skills, • Ability to travel regularly to multiple facilities, • U.S. Citizenship required, • Ability to obtain and maintain federal security clearance eligibility Preferred • Experience supporting federal or government facilities, • Experience with modernization or construction projects, • Familiarity with facility management systems Why This Opportunity This role offers the opportunity to support meaningful federal modernization initiatives while contributing to facility reliability, operational continuity, and long-term infrastructure performance. Apply Today If you’re looking for a high-impact opportunity supporting complex federal infrastructure systems, we encourage you to apply.

Job Description Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is: • 100% employee-owned with 40+ years of industry history, • ENR (Engineering News Record) Top 500 firm, • Rated as a top System Integrator Giant Our Kansas City, MO Wunderlich Malec Engineering team is seeking a travel-ready, entry-level Field Engineer or Technician who is eager to build hands-on technical experience and grow quickly. Field-based commissioning work provides direct exposure to systems, customers, schedules, and real-time decision-making, accelerating the development of technical expertise and project execution skills. Compared with a traditional office-based engineering role, this position provides direct ownership of installation verification, control system testing, commissioning support, and start-up activities. This role supports projects across industries including Data Center, Semiconductor, Life Science, Food & Beverage, and other industrial facilities. Responsibilities include electrical and controls engineering support, electrical and instrumentation verification, coordination with clients and electrical subcontractors, PLC/SCADA/HMI support, commissioning execution, and start-up assistance. Please Note: This position is not eligible for employer-sponsored work authorization, including H-1B sponsorship. The Company does not participate in the STEM OPT training program for this position. Major Responsibilities • Installation & Wiring QA/QC Verification (Level 2 Commissioning). Verify that control panels, field devices, instruments, and related control system equipment have been installed and wired in accordance with manufacturer requirements, approved shop drawings, project documentation, and applicable quality standards and specifications, • Point-to-Point Testing (Level 3 Commissioning). Confirm that field devices associated with the control system are installed, wired, addressed, and configured in accordance with approved system drawings and documentation. This includes verification of data to and from field devices, including signals received through network integration, • Functional Performance Testing (FPT) (Level 4 Commissioning). Verify that the control system and field devices operate as defined by the project design documentation. This includes testing control sequences, alarm and alert configuration, alarm activation, trend displays, trend configuration, system graphics, and control system response during failure scenarios, • System-Level Testing Support (Level 5 Commissioning). Support system-level testing to confirm that the control system and field devices operate together as an integrated system. This includes verifying control sequences across related systems, using the facility’s Supervisory Control and Data Acquisition (SCADA) system to view equipment status and navigate system screens, activating alarms, monitoring trends, and supporting failure-mode testing Minimum Requirements Education BS Electrical, Computer, Chemical, or Mechanical Engineering preferred. An AA in Engineering Technology or equivalent field technician experience may be substituted. Experience New Graduate or 0-2 years of field experience • Understanding of or exposure to field instrumentation, hardware panels and low voltage controls design, • Understanding of control systems, components, PLC programming, SCADA programming and their applications Physical Demands of Position Requirements Above all else, attention to all applicable safety specifications and standards is a requirement. Strong attention to detail and a consistent focus on quality control are required, especially during repetitive commissioning activities. The role may include writing, computer work, field work in construction trailers or industrial environments, color perception, hearing, verbal and written communication, teamwork, manual dexterity, driving, lifting, climbing, mounting and dismounting equipment, pushing, and pulling. Regular interaction and coordination with customers, subcontractors, vendors, and internal project teams is expected. Daily use of a computer, standard office applications, and a mobile phone is required. Working/Residence Plan Up to 100% travel to project sites may be required, excluding approved vacation or paid time off. Work is typically performed Monday through Friday, with occasional weekend work required based on project needs. Assignments may last multiple months at various U.S.-based project sites. Weekend travel home may be available up to two times per month, subject to project schedule requirements and approval. Project housing, airfare, meals, and incidentals are covered by the company in accordance with company policy. This position includes full company benefits, structured training, mentorship, and three weeks of paid time off. Work Conditions This is primarily a field-based, hands-on role performing automation work at client sites, with occasional office or trailer-based work as needed. Field/Client Site Environment (Primary) • Ability to stand, move, and work on job sites for up to 8-12 hour shifts, • Ability to climb stairs/ladders, work at heights, and occasionally lift up to 40 lbs, • Frequent bending, reaching, and working in and around industrial equipment, • Exposure to construction, industrial, and processing environments, including noise, temperature changes, and moving machinery, • Ability to safely wear required PPE (safety glasses, steel-toed boots, hearing protection, and electrical safety gear as applicable), • Comfortable performing electrical/instrumentation checkout and troubleshooting (e.g., voltage testing, control panel wiring) Office/Trailer Work (Occasional) • Periods of sitting/standing at a computer, including in on-site construction trailers, • Standard office/PC and cell phone use for documentation, communication, and project support Ability to work safely and effectively in both indoor and outdoor environments, including exposure to extreme temperatures, weather conditions, humidity, dust, and other environmental conditions typical of construction, industrial, and processing facilities. Reasonable accommodation can be provided for individuals with disabilities to perform essential job functions. Career Growth & Advancement This role is designed for ambitious, goal-oriented self-starters who want to accelerate their technical and leadership development through hands-on field experience. Field Engineers and Technicians who demonstrate strong technical capability, sound judgment, ownership, and leadership on-site can advance faster than peers following a traditional office-based engineering path. High performers may move into lead field roles ahead of the typical timeline. Training & Mentorship You'll build capability through hands-on training across progressively challenging commissioning assignments, Level 2 through Level 5, with mentorship from senior field engineers on every project. Merit-Based Advancement Advancement is based on demonstrated proficiency, ownership, technical judgment, and field performance - not time in role alone. Commissioning Levels 2 through 5 represent scopes of commissioning activity, not job titles. As capability grows across these scopes, high performers can earn responsibility for larger and more complex commissioning activities. Own It in the Field As you demonstrate competency, you're given real ownership on-site. This includes: • Leading point-to-point testing campaigns for entire system areas independently., • Owning functional performance testing for major systems end-to-end., • Serving as the primary technical point of contact with subcontractors and customers during system-level testing., • Directing and overseeing commissioning activities for a major project area — taking full accountability for safety, quality, schedule, and sign-off. Where Can This Take You Field engineers and technicians who build a strong track record are positioned for rapid advancement, including paths such as: • Associate Field Engineer → Staff Field Engineer → Senior Field Engineer, • QA/QC Manager, • Controls Project Engineer, • Commissioning Lead, • Project Manager, • Mentor or Technical Evaluator for future field hires *Job Descriptions are not exhaustive lists of all skills, responsibilities, or efforts associated with a job. They reflect principal job elements essential for performing the job and evaluating performance. Wunderlich-Malec is proud to offer a comprehensive employee-owner benefit package. Full-time employees may be eligible for the following benefits: Medical • Dental • Vision • Basic and Supplemental Life and AD&D • Long Term Disability • Voluntary Short Term Disability • Healthcare & Dependent Care Flexible Spending Accounts • Health Savings Account • Paid Time Off (PTO) • Paid Holidays • Tuition Reimbursement • Referral Bonus Program • 401(k)/Profit Sharing • 100% ESOP (Employee Stock Ownership Plan) • Employee Assistance Program • Will Preparation Resources • Worldwide Travel Assistance #LI-Hybrid #LI-WM1

Job Description U.S. Engineering has been an industry leader through constant innovation and a willingness to evolve. The construction industry changes rapidly, and we cultivate a dynamic workplace where even our newest team members can influence change and make an impact. We know that our most valuable asset is our people. Join us! DIRECTOR – MECHANICAL CONSTRUCTION OPERATIONS In any given year, our people have a hand in installing, maintaining, or operating hundreds of large mechanical systems – or supporting those that do. With each of those, there’s a story that is affecting people’s lives. That’s a responsibility we take very seriously, and it’s why we are driving innovation and disrupting the way people think about construction and facility service. The Operations Director is a vital part of the U.S. Engineering Innovations team and is responsible for overseeing the profitability and overall success of assigned project teams. Additionally, the Operations Director holds broader leadership responsibility for the overall success of the company and, as such, is a cultural champion, executes on the strategic plan, develops talent, leads positive change, and continuously contributes quality improvement. Principal Duties and Accountabilities: • Responsible for the effective management and leadership of the assigned site team(s). Scope includes recruitment and selection, performance management, learning and development, mentorship, succession planning, and administration of human resources policy and procedure., • Responsible for building and fostering effective relationships with project owners, primary clients, general contractors, subcontractors, vendors, etc. to leverage business opportunities., • Responsible for overall profit management of assigned projects., • Monitor key performance indicators (KPIs) throughout the lifecycle of every project. Execute course corrections when KPIs signal below average project performance. Oversee creation and execution of project recovery plans when necessary., • Ensure project goals are established at the start of each new project. Project goals to include profitability, manufacturing target percentage, cash flow, and customer satisfaction., • Responsible for team development of on-site plans and effective execution of that plan during the project lifecycle. This includes collaboration with the U.S. Engineering Innovations off-site manufacturing and project development teams., • Assist with yearly budget preparation, quarterly updates, and formulation of the regional business plan. Monitor revenue within the assigned project management group and adjusts staff when necessary to maintain or exceed business plan goals., • Assist with all stages of the project procurement process through contract review, scope and specification review, constructability review, labor impact factoring, manufacturing strategies, formulating general conditions, risk analysis, and interview preparation for all assigned projects., • Ensure all projects within assigned group execute pre-planning and risk mitigation workflows including estimating turnover, management review, manufacturing plan, cash management plan, buyout plan, project schedules, productivity tracking, job audits, debriefs, etc., • Responsible for evaluation of manufacturing execution methods for efficiency, cost impacts, technology advances, and quality control and assurance., • Review and approve profit forecasts for all projects within assigned team utilizing the forecast review procedures. Provide Operations VP with monthly updated WIP information and project risk/opportunity analysis for all assigned projects., • Oversee the review, negotiation, and execution of all contracts and subcontracts for assigned project group. Review all change orders and lien releases prior to execution., • Responsible for ensuring all projects within business unit are in full compliance of the safety program and aligned with desired safety culture. Regularly partners with Safety Director to ensure continuous quality improvement in safety programs as needed., • Identify opportunities for future projects and networks internally and externally to pursue such opportunities., • Gather, organize, and document project historical data and “lessons learned” to aid in the company’s productivity and project quality monitoring., • Work collaboratively with peers to participate in community or philanthropic activities. Education: • Bachelor’s Degree in Construction Science Management, Architectural Engineering, Mechanical Engineering, or Business Management preferred., • Equivalent combination of field and leadership experience will be considered. Experience: • Extensive experience in construction industry – minimum of 15 years., • Prior experience as top-level manager overseeing projects, schedules, budgets, and teams., • Experience as a member of a senior leadership and/or strategic planning team. Knowledge, skills, and abilities: • Excellent leadership and communication skills; proven collaborator able to establish and foster effective professional relationships, internally and externally., • Ability to articulate message, to be persuasive, and explain position to target audiences who may possess varying levels of technical knowledge., • Extensive knowledge of mechanical construction industry practices, processes, and standards., • Able to build and develop high performance project teams through innovative and effective management techniques., • Able to work autonomously but within parameters of corporate policy and standards., • Excellent time management and organizational skills., • Ability to adapt effectively to changing priorities., • Ability to identify and research potential opportunities, assist with procurement strategies, and leverage knowledge gained during the pre-award process to win proposal competitions., • Strong presentation and public speaking skills., • Strategic and innovative thinker who can envision the future and lead and manage change efforts when necessary., • Customer focus; dedicated to meeting the expectations of internal and external customers by gaining their trust and delivering results., • Ability to travel extensively to all job sites. Benefits and Compensation: • The range for this position has been established at $153,120.00 - $216,500.00 and is US Engineering Innovations’ good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty, and training., • Your total compensation will go beyond the number on your paycheck. Team members are eligible for a year-end bonus based on company and/or individual performance as well as paid time off. An industry-leading benefits package including health, dental, and vision plans, matching retirement contributions, and matching 529 contributions all add to your bottom line.This position will be posted until August 15, 2026. To apply, please visit https://www.usengineering.com/careers/job-postings/. U.S. Engineering is an Equal Employment Opportunity Employer and shall provide equal employment opportunities to all people in all aspects of employer-employee relations, without regard to race, color, creed, national origin, religion, sex, age, sexual orientation, gender identity, disability, or veteran status. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Equal Opportunity Employer, including disabled and veterans. #IND Powered by JazzHR AkwaY8VGtv