Solidworks jobs in Norfolk, VirginiaCreate job alerts

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD) is seeking Inside Machinists with CNC programming, setup, and machining experience to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. This role requires knowledge of machining principles, precision measurement, and blueprint interpretation. Unlike high-volume "widget" machining shops, our work consists of one-off and non-repeat builds with tight tolerances, exotic alloys, and high-quality standards that directly support the U.S. Navy submarine fleet. This role does not require travel but may require overtime. CNC PROGRAMMING & SETUP: • Review and edit CNC programs (lathe and mill) using G-code and CAM platforms., • Set up, align, and secure workpieces, fixtures, and tooling on CNC and manual machines., • Perform the setup and operation of a wide range of equipment that could include lathes, mills, grinders, saws, and/or related shop machinery., • Machine complex components from materials such as HY-80, HY-100, stainless steel, Inconel, and other submarine-grade alloys., • Select the correct speeds, feeds, tooling, accessories, and cutting methods to achieve required tolerances and surface finishes, under some supervision., • Read, interpret, and execute machining work using complex blueprints, drawings, manuals, GD&T callouts, and technical work documents., • Inspect, measure, and verify machined features using OD/ID micrometers, height gauges, depth gauges, calipers, verniers, dial indicators, lay-out tools, and other precision metrology equipment., • Accurately record measurements, readings, and inspection data to ensure compliance with critical tolerances., • Adhere to stringent submarine and Navy quality standards, including tight tolerances, high-accuracy fits, and critical surface finishes., • Follow all company, OSHA, and NAVSEA safety and cleanliness requirements., • Support continuous improvement in tooling, fixturing, machining methods, and program efficiency. REQUIRED: • High School Diploma/GED., • Minimum two (2) years' experience machining complex submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment., • Demonstrated proficiency in CNC programming (lathe and mill)., • Ability to perform full setup and operate CNC and/or manual machines., • Ability to edit existing programs and perform offsets as needed., • Ability to read and interpret complex blueprints, drawings, GD&T, and technical specifications., • Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.)., • Ability to perform in process inspections with accurate documentation to maintain quality standards., • Demonstrated proficiency using precision measuring instruments and accurately documenting measurements., • Ability to work independently, with occasional supervision., • Experience with exotic alloys and challenging machining conditions., • Familiarity with NAVSEA or military specifications., • CAM software experience (Mastercam, SolidWorks, etc.)., • Demonstrates high attention to detail and quality craftsmanship., • Strong communication skills with a collaborative mindset., • Ability to coordinate effectively with individuals in other departments, such as Quality or Engineering., • Willingness and ability to mentor less experienced Inside Machinists., • Prioritizes safety and maintaining a clean and organized work area. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: • This position is considered SHOP/INDOORS which is characterized as follows., • Primarily indoors during the day and occasionally at night, • May require working on or near moving equipment and vibrating equipment, • May be exposed to intense light from welding operations., • Occasional exposure to open fire/flames/sparks from welding and grinding operations, • Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT • Lift 20-50 pounds., • Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands., • Identify color differences., • Lift 10-25 pounds., • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead., • Operate a motor vehicle., • Lift up to 10 pounds., • Wear PPE protection as required for the conditions., • Be able to recognize and react to alarms. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The Manufacturing CNC Programmer's primary responsibility is modelling and post processing of Manufacturing Projects requiring advanced High Speed CNC Machining G-Coding utilizing SolidWorks and Mastercam. This role supports Oceaneering's Marine Services Division (MSD) and is located in Chesapeake, VA. Overtime may be required up to 20% of the year. • Responsible for day-to-day machine shop coordination of programming issues., • Evaluate projects and TWD requirements for computer aided manufacturing realization., • Generate solid modelling files., • Generate CNC tool pathing with non-interference proofing., • Create, organize, and manager CAM post editor files., • Upload operator-ready G-Code program solutions for safe CNC Turning and Machining Center production operations., • Develop advanced manufacturing production processes for high-speed CNC Turning and Machining Center applications., • Design and generate program code and manufacturing processes for required project item specific fixturing and tooling., • Develop step-by-step operator friendly set-up process and production routing., • Maintain a safe working environment by adhering to and enforcing all safety procedures and policies inside and outside the facility, including use of personal protective and other equipment as required. REQUIRED: • High School diploma/GED., • Minimum of five (5) years of CNC machining process development experience., • Minimum of five (5) years CAM Systems post editing process programming experience, specifically SolidWorks & Mastercam., • Minimum of five (5) years of experience with close tolerance, high-speed machining., • Demonstrated proficiency in Microsoft Office applications (i.e. Excel, Word, etc.), • Must be able to read blueprints and have strong knowledge of applied math., • Must have excellent oral and written communications skills., • Ability to rely on experience and judgment to plan and accomplish goals., • Ability to successfully reach company goals in an environment in which a wide degree of creativity and latitude is required., • Ability to represent MSD in a positive manner while adhering to the organization's core values. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The Engineer IV applies advanced technical knowledge to Oceaneering's Marine Services Division's (MSD) engineering and design activities. This role is located in Chesapeake, VA. The Engineer IV provides technical leadership and oversight for large and/or complex projects under the direction of a Project Manager. This role assists the Design Engineering Manager and Project Manager in defining and managing resource requirements, schedule, and cost for projects under his/her cognizance. The Engineer IV interacts with other MSD personnel including those in QA, Manufacturing, Purchasing, Shipping and Receiving, as necessary to provide engineering support to MSD manufacturing, integration, and test activities. They direct an engineering design/production team in development of a design project/production availability throughout the entire cycle from initial concept/planning through successful completion. They complete assigned engineering projects in accordance with customer specifications and within schedule and budget limitations through coordinating activities of engineering team, contractors, and vendors. This role may require up to 25% travel. • Independently perform difficult engineering tasks to completion that may include a variety of complex features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others., • Exhibit excellent technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions., • Demonstrate ability to devise innovative solutions to problems., • Develop objectives, schedules, and estimates for difficult assignments., • Direct and supervise the activities of moderate to large size teams of engineers, tech writers, designers, and drafters., • Review progress and evaluate results of work accomplished by self and others., • Interact with customer technical representatives to define and manage customer expectations., • Use team management skills to lead the design engineering group during various phases of a project or availability., • Assess vendors for competence, capabilities, and resources., • Review/approve Engineering Work Packages (e.g. TGIs) related to project., • Review/approve Engineering Change documents (e.g. CRs, LARs, DFSs) related to project., • Review/approve Engineering designs, models, drawings and calculation packages., • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere., • May assist in or lead Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data., • May participate in or lead Technical Working Groups to assess and improve processes and capabilities. REQUIRED: • Bachelor's degree in Engineering (Mechanical, Electrical, Ocean or Nuclear) or Naval Architecture from accredited college or university., • Minimum ten (10) years engineering experience in complex systems design, manufacturing, and integration environment., • Demonstrated ability to lead technical groups of more than five engineers, designers, and/or drafters., • Familiarity with ISO 9000 design requirements., • Proficiency in Microsoft Office products and CAD software, such as AutoCAD or SolidWorks or similar packages., • Must be a U.S. citizen who is not a dual citizen of any other country., • Master's degree in related field., • Proficiency in MathCad., • Engineer in Training (passed FE exam)., • Excellent communications and organizational skills., • Understands Finite Element Analysis -particularly Solidworks Simulation or ANSYS Workbench. Working knowledge of both is preferrable., • Must be competent in system engineering methodologies., • Experience performing Dynamic Design Analysis Method (DDAM) is a plus., • Demonstrated knowledge of SUBAFE or SOC requirements is preferred., • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields., • Possesses a working knowledge of the manufacturing/integration aspects related to one or more technical fields related to MSD efforts., • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD) is seeking an Engineer II to support engineering and design activities in Chesapeake, VA. The Engineer II applies a working knowledge of engineering fundamentals to the division's engineering and design activities under the direction of a Project Engineer or Design Engineering Manager. The Engineer II will also be required to interact with other company personnel including those in QA, Manufacturing, Purchasing, Shipping and Receiving, as necessary to provide engineering support to manufacturing, integration, and test activities. • Performs moderately difficult engineering tasks to completion that may include a variety of design features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others., • Exhibit good technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions., • Demonstrate ability to devise innovative solutions to problems., • Develops objectives, schedules, and estimates for difficult assignments., • Review progress and evaluate results of work accomplished by self., • Assess vendors for competence, capabilities, and resources., • Review/approve Engineering Work Packages (e.g. TGIs) related to project., • Review/approve Engineering Change documents (e.g. CRs, LARs, DFSs) related to project., • Review/approve Engineering designs, models, drawings and calculation packages., • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere., • May assist in Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data., • May participate in Technical Working Groups to assess and improve processes and capabilities. REQUIRED: • Bachelor's degree in engineering (Mechanical, Electrical, Ocean or Nuclear) or Naval Architecture from accredited college or university., • Minimum two (2) years engineering experience in complex systems design, manufacturing, and integration environment., • Proficiency in Microsoft Office products and CAD software, such as AutoCAD or SolidWorks or similar packages., • Must be a U.S. citizen who is not a dual citizen of any other country., • Master's degree in related field., • Proficiency in Mathcad, SolidWorks Simulation or Ansys., • Experience leading multidisciplinary design teams., • Good communications and organizational skills., • Understands Finite Element Analysis - particularly SolidWorks Simulation or ANSYS Workbench, working knowledge of both is preferrable., • Experience performing Dynamic Design Analysis Method (DDAM) is a plus., • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD), located in Chesapeake, Virginia, is seeking an Engineer I focused on NEW DESIGN DEVELOPMENT to support engineering and design activities in Chesapeake, VA. This role is ideal for an engineer who wants to create new systems, develop original solutions, and contribute to cutting-edge projects supporting submarine and deep-submergence platforms. The Engineer I applies a solid foundation of engineering principles to design new components, systems, and assemblies, working under the direction of a Mentor, Project Engineer or Design Engineering Manager. The role also requires collaboration with QA, Manufacturing, Purchasing, and Test teams to transition new designs from concept through production, integration, and verification. • Perform engineering tasks focused on new system and component design, including concept development, modeling, analysis, and documentation., • Help to solve design challenges involving conflicting requirements, unique materials, and multi-disciplinary constraints., • Apply sound technical judgment, creativity, and independent evaluation to develop innovative solutions., • Help to develop engineering designs, models, drawings, and calculation packages., • Work effectively in an ISO-9000 environment with rapidly changing priorities., • Participate in Technical Working Groups to improve design processes and capabilities. REQUIRED: • Bachelor's degree in Engineering (Mechanical, Electrical, Ocean, Nuclear) or Naval Architecture., • Proficiency with Microsoft Office and CAD tools such as AutoCAD or SolidWorks., • U.S. citizenship (no dual citizenship)., • Master's degree in related field., • Strong communication and organizational skills., • Understanding of Finite Element Analysis principles-SolidWorks Simulation or ANSYS Workbench preferred., • "Self-starter" attitude that is capable of working on a multidisciplinary engineering team., • Ability to apply advanced engineering principles to new design challenges. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The Engineer IV applies advanced technical knowledge to Oceaneering's Marine Services Division's (MSD) engineering and design activities. This role is located in Chesapeake, VA. The Engineer IV provides technical leadership and oversight for large and/or complex projects under the direction of a Project Manager. This role assists the Design Engineering Manager and Project Manager in defining and managing resource requirements, schedule, and cost for projects under his/her cognizance. The Engineer IV interacts with other MSD personnel including those in QA, Manufacturing, Purchasing, Shipping and Receiving, as necessary to provide engineering support to MSD manufacturing, integration, and test activities. They direct an engineering design/production team in development of a design project/production availability throughout the entire cycle from initial concept/planning through successful completion. They complete assigned engineering projects in accordance with customer specifications and within schedule and budget limitations through coordinating activities of engineering team, contractors, and vendors. This role may require up to 25% travel. • Independently perform difficult engineering tasks to completion that may include a variety of complex features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others., • Exhibit excellent technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions., • Demonstrate ability to devise innovative solutions to problems., • Develop objectives, schedules, and estimates for difficult assignments., • Direct and supervise the activities of moderate to large size teams of engineers, tech writers, designers, and drafters., • Review progress and evaluate results of work accomplished by self and others., • Interact with customer technical representatives to define and manage customer expectations., • Use team management skills to lead the design engineering group during various phases of a project or availability., • Assess vendors for competence, capabilities, and resources., • Review/approve Engineering Work Packages (e.g. TGIs) related to project., • Review/approve Engineering Change documents (e.g. CRs, LARs, DFSs) related to project., • Review/approve Engineering designs, models, drawings and calculation packages., • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere., • May assist in or lead Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data., • May participate in or lead Technical Working Groups to assess and improve processes and capabilities. REQUIRED: • Bachelor's degree in Engineering (Mechanical, Electrical, Ocean or Nuclear) or Naval Architecture from accredited college or university., • Minimum ten (10) years engineering experience in complex systems design, manufacturing, and integration environment., • Demonstrated ability to lead technical groups of more than five engineers, designers, and/or drafters., • Familiarity with ISO 9000 design requirements., • Proficiency in Microsoft Office products and CAD software, such as AutoCAD or SolidWorks or similar packages., • Master's degree in related field., • Proficiency in MathCad., • Engineer in Training (passed FE exam)., • Excellent communications and organizational skills., • Understands Finite Element Analysis -particularly Solidworks Simulation or ANSYS Workbench. Working knowledge of both is preferrable., • Must be competent in system engineering methodologies., • Experience performing Dynamic Design Analysis Method (DDAM) is a plus., • Demonstrated knowledge of SUBAFE or SOC requirements is preferred., • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields., • Possesses a working knowledge of the manufacturing/integration aspects related to one or more technical fields related to MSD efforts., • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering's Marine Services Division (MSD) is seeking a highly skilled Inside Machinist with CNC programming, setup, and machining expertise to support the manufacturing of complex, critical submarine components in a low-volume, build-to-print environment. This role requires mastery of machining principles, precision measurement, and blueprint interpretation. Unlike high-volume "widget" machining shops, our work consists of one-off and non-repeat builds with tight tolerances, exotic alloys, and high-quality standards that directly support the U.S. Navy submarine fleet. This role does not require travel but may require overtime. CNC PROGRAMMING & SETUP: • Review, edit, and optimize CNC programs (lathe and mill) using G-code and CAM platforms., • Set up, align, and secure workpieces, fixtures, and tooling on CNC and manual machines., • Perform the setup and operation of a wide range of equipment including lathes, mills, grinders, saws, and related shop machinery., • Machine complex components from materials such as HY-80, HY-100, stainless steel, Inconel, and other submarine-grade alloys., • Select the correct speeds, feeds, tooling, accessories, and cutting methods to achieve required tolerances and surface finishes., • Read, interpret, and execute machining work using complex blueprints, drawings, manuals, GD&T callouts, and technical work documents., • Inspect, measure, and verify machined features using OD/ID micrometers, height gauges, depth gauges, calipers, verniers, dial indicators, lay-out tools, and other precision metrology equipment., • Accurately record measurements, readings, and inspection data to ensure compliance with critical tolerances., • Adhere to stringent submarine and Navy quality standards, including tight tolerances, high-accuracy fits, and critical surface finishes., • Follow all company, OSHA, and NAVSEA safety and cleanliness requirements., • Support continuous improvement in tooling, fixturing, machining methods, and program efficiency. REQUIRED: • High School Diploma/GED, • Minimum eight (8) years' experience machining complex submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment., • Ability to develop new programs or machining strategies across manual and/or CNC machines., • Ability to perform advanced setups, optimize tool paths, and improve setup instruction sheets on multiple machines., • Ability to operate both CNC and manual machine tools, develop fixturing and processes, and troubleshoot issues without supervision or guidance., • Able to read, interpret, and evaluate advanced blueprints, drawings, GD&T, and technical specifications for manufacturability without supervision or guidance., • Ability to perform multi-axis machining operations (e.g., 4-axis or 5-axis mills) as applicable., • Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.)., • Ability to perform First Article Inspections and resolve issues to make sustainable quality improvements., • Demonstrated knowledge and proficiency in machining practices for tight-tolerance, critical components., • Demonstrated proficiency using precision measuring instruments and accurately documenting measurements., • Ability to work independently, problem-solve, and train others., • Experience with exotic alloys and challenging machining conditions., • Familiarity with NAVSEA or military specifications., • CAM software experience (Mastercam, SolidWorks, etc.)., • Demonstrates high attention to detail and exhibits technical excellence and leadership qualities to drive culture of continuous improvement., • Strong communication skills with a collaborative mindset., • Ability to act as a liaison between supervision and other departments, such as Quality or Engineering., • Adaptable and resourceful - able to plan work and think critically in a one-off production environment., • Willingness and ability to train less experienced Inside Machinists to support a culture of continued learning and growth., • Leads by example; prioritizes and models safety culture and assists in reviewing cleanliness of work area. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: • Primarily indoors during the day and occasionally at night., • May require working on or near moving equipment and vibrating equipment., • May be exposed to intense light from welding operations., • Occasional exposure to open fire/flames/sparks from welding and grinding operations., • Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT • Lift 20-50 pounds., • Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands., • Identify color differences., • Lift 10-25 pounds., • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects., • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead., • Operate a motor vehicle., • Lift up to 10 pounds., • Wear PPE protection as required for the conditions., • Be able to recognize and react to alarms. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Join our team as a Project Engineer (PE) and take the lead on exciting, large-scale projects that challenge your technical expertise and leadership skills. As a key member of our engineering department, you'll work closely with the Chief Engineer and Project Manager to define and manage the resources, schedule, and costs for our cutting-edge projects. Collaborating with diverse teams across our organization, including QA, Manufacturing, Purchasing, Shipping and Receiving, you'll provide crucial engineering support throughout the manufacturing, integration, and testing phases. With your guidance, our engineering team will deliver high-quality solutions from initial concept to successful completion, ensuring project and production availability align with customer specifications. If you're ready to drive innovation and make a tangible impact within a collaborative environment, apply now. EXPECTATIONS: • Self-motivated, focused individual with strong attention to detail and high ethical standards., • Capable of developing and leading a small engineering team through a complex submarine overhaul., • Ability to read and interpret blue prints, applicable submarine specifications and Special Emphasis Program requirements., • Ability to work as part of a team of managers and technical personnel and support multiple projects., • Strong organizational skills and analytical / logical approach., • Ability to synthesize diverse information (technical, schedule) and exercise good judgment., • Good technical judgment and some independent evaluation, originality and ingenuity are expected., • Independently performs difficult engineering tasks to completion that may include a variety of complex features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others., • Excellent technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions are expected., • Demonstrates ability to devise innovative solutions to problems., • Develops objectives, schedules, and estimates for difficult assignments., • Directs and supervises the activities of small to moderate size teams of engineers and tech writers, • Reviews progress and evaluates results of work accomplished by self and others., • Interacts with customer technical representatives to define and manage customer expectations., • Uses team management skills to lead the design or production engineering group during various phases of a project or availability., • Reviews Engineering Work Packages (e.g. TGIs) related to project., • Assist in Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data., • Participate in Technical Working Groups to assess and improve processes and capabilities. EDUCATION: • Minimum 5 years engineering experience in complex systems design, manufacturing, and integration environment. Knowledge related to submarine structural fabrication and welding requirements such as NAVSEA Tech Pub 1688, 278, or 248 and the NAVSEA URO/MRC program desired., • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work., • Demonstrated ability to lead technical groups., • Excellent communications and organizational skills., • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work., • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields., • Has provided field support in engineering capacity., • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere., • Must be able to obtain a U.S. DoD Secret Security Clearance., • Must be a U.S. citizen who is not a dual citizen of any other country., • Must be willing to travel up to 25%., • Basic understanding of Project Management. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Job Description Venture Dynamics is seeking an experienced CNC Programming & Production Manager to oversee CNC machining operations and production workflow in a precision manufacturing environment. This role leads CNC programming activities while managing machining production to ensure quality, efficiency, and schedule performance. The position supports precision manufacturing of industrial and defense-related components using multi-axis CNC machining equipment. Assignments are project-based and may continue based on performance and operational needs. Responsibilities • Develop, maintain, and optimize CNC programs for multi-axis milling and turning centers using CAD/CAM software, • Manage daily machining production activities to ensure schedules, throughput targets, and delivery commitments are met, • Supervise CNC machinists, operators, and programmers to maintain safe, efficient, and high-quality manufacturing operations, • Analyze machining processes and implement improvements to increase efficiency and reduce cycle times, • Coordinate with engineering, quality, and production teams to support manufacturing requirements and resolve technical issues, • Oversee machine setup validation, program prove-out, and first article production to ensure accuracy and repeatability, • Monitor tooling usage, machine performance, and maintenance needs to maintain optimal machining conditions, • Minimum 7 years experience in CNC machining, programming, or manufacturing operations, • Demonstrated experience supervising machinists, programmers, or machining teams in a production environment, • Strong knowledge of CNC machining processes, multi-axis machining centers, tooling, and workholding methods, • Proficiency with CAD/CAM software and G-code programming for CNC machining equipment, • Ability to read and interpret engineering drawings, machining specifications, and technical documentation, • Strong troubleshooting and process improvement capabilities in high-precision manufacturing environments, • Experience with Mastercam, SolidWorks CAM, or similar CAD/CAM programming platforms, • Experience supporting defense, marine, aerospace, or heavy industrial manufacturing operations, • Knowledge of Lean Manufacturing or continuous improvement practices Work is performed in an active manufacturing and machining environment supporting industrial production operations. The role requires interaction with machining equipment, production personnel, engineering teams, and quality staff to maintain manufacturing efficiency and product quality. PPE may be required when entering active machining areas in accordance with facility safety policies. Reliable transportation is required to report to assigned manufacturing facilities. Work schedules may include overtime or extended hours depending on production demand. Venture Dynamics is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status under applicable law.

Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. ESSENTIAL • Develop and apply advanced engineering analytical and design methods, theories and research techniques, to complex engineering projects., • Coordinate and supervise a team of engineers, designers, drafters, technical writers, and technicians., • Review progress and evaluate results of work accomplished by self and others., • Technically manage projects of moderate scope., • Estimate resource requirements to meet technical and scheduling objectives., • Review and approve the completion and implementation of technical products to meet the customer requirements., • Demonstrate excellent technical judgment, independent evaluation and innovative solutions to problems., • Write test procedures, conduct tests, compile and evaluate test data, and complete required documentation., • Interact with customer representatives to define and manage customer expectations., • Participate in Technical Working Groups to assess and improve ADTECH processes and capabilities., • Assist in bid and proposal efforts by providing cost estimations, technical approach definitions, and input to baseline schedule data., • Domestic and international travel, including shipboard operations., • Additional duties as assigned. REQUIRED • Bachelor of Science degree in Mechanical Engineering or Equivalent experience, from an accredited institution., • 5-10 years of practical technical experience in the engineering process, including concept development, analysis, design, drawing, integration and testing of complex mechanical and/or ocean deployed systems., • 2 or more years of management experience leading multidisciplinary design teams., • Responsible for producing significant portions of individual project mechanical designs, • Demonstrated ability to lead technical groups and interact with customer representatives., • Proficiency in the application of current engineering software (i.e. SolidWorks, ANSYS, Matlab, etc), and Microsoft Office, • Able to apply an advanced knowledge of the principles, practices and procedures of mechanical engineering and an understanding of related engineering fields., • Work closely with electrical, software, and systems engineers, as well as other cooperative disciplines, to solve problems and constructively architect a working system., • Responsible and accountable for your results, working with considerable autonomy, but also knowing when to ask for assistance., • Ability to obtain a United States Government Department of Defense Security Clearance (active clearances preferred, but not prerequisite), • Must be a US Citizen., • Desire to stretch and expand your talents, expertise, competency, and responsibilities. DESIRED • Advanced degree in Mechanical Engineering, Ocean Engineering or a related field, from an accredited institution., • Exercise excellent technical judgement, creativity, and initiative with attention to detail consistently throughout your work product, with awareness of the "system" perspective., • Strong communication, organizational and technical writing skills, including ability to effectively document, convey, and present engineering concepts and products to team members and customers., • Knowledge and/or experience in the marine industry, fielding Ship Board systems and associated technologies., • Hands-on abilities for assembling mechanical components. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary The Manufacturing CNC Programmer's primary responsibility is modelling and post processing of Manufacturing Projects requiring advanced High Speed CNC Machining G-Coding utilizing SolidWorks and Mastercam. This role supports Oceaneering's Marine Services Division (MSD) and is located in Chesapeake, VA. Overtime may be required up to 20% of the year. Duties And Responsibilities \n • Responsible for day-to-day machine shop coordination of programming issues.\n, • Evaluate projects and TWD requirements for computer aided manufacturing realization.\n, • Generate solid modelling files.\n, • Generate CNC tool pathing with non-interference proofing.\n, • Create, organize, and manager CAM post editor files.\n, • Upload operator-ready G-Code program solutions for safe CNC Turning and Machining Center production operations.\n, • Develop advanced manufacturing production processes for high-speed CNC Turning and Machining Center applications.\n, • Design and generate program code and manufacturing processes for required project item specific fixturing and tooling.\n, • Develop step-by-step operator friendly set-up process and production routing.\n REQUIRED: \n • High School diploma/GED.\n, • Minimum of five (5) years of CNC machining process development experience.\n, • Minimum of five (5) years CAM Systems post editing process programming experience, specifically SolidWorks & Mastercam. \n, • Minimum of five (5) years of experience with close tolerance, high-speed machining.\n, • Demonstrated proficiency in Microsoft Office applications (i.e. Excel, Word, etc.)\n, • Must be able to read blueprints and have strong knowledge of applied math. \n, • Must have excellent oral and written communications skills.\n, • Ability to rely on experience and judgment to plan and accomplish goals.\n, • Ability to successfully reach company goals in an environment in which a wide degree of creativity and latitude is required.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Epsilon Systems is seeking a full time Inside Machinist/CNC Programmer to be a part of our team in Portsmouth, VA. Summary:The Inside Machinist/CNC Programmer's primary responsibilities include modelling and post processing of Manufacturing Projects requiring advanced High Speed CNC Machining G-Coding utilizing SolidWorks and Mastercam. The Machinist/CNC Programmer is responsible for CNC machine programming, setup and first article for multi-axis CNC mills and lathes, for both production and prototype components. Create, review, and edit computer numeric controlled (CNC) machining programs and maintain programming databases and files for each part and machining center Duties and Responsibilities \n • Generation of CAM System wire and solid modelling files from blueprints/drawings.\n, • CNC tool pathing with non-interference proofing.\n, • CAM post editor file creation, organization and management.\n, • Must have full understanding of G-code to perform edits or add lines of code for tool path correction once identified.\n, • Upload and operator ready G-Code program solutions for safe CNC Turning and Machining Center production operations.\n, • Design and generate program code and manufacturing processes for required project item specific fixturing and tooling.\n, • Establish required purchased material and tooling for CAM supported projects\n, • Read mechanical drawings and navigate technical work documents to produce submarine/shipboard components on CNC machines.\n, • Ability to choose and install the correct cutting tools based on the machining operation tool list and material.\n, • Able to use mathematical equations to calculate speeds and feeds based on material type to cut, turn, drill, mill, bore, tap, thread and ream components.\n, • Familiar with machining non-ferrous materials such as Stainless steels, K-Monel, Inconel 625, Inconel 718, copper, brass, nylon, Teflon, 6061-T6 Aluminum, 4140, 4130, and various plastics.\n, • Reads, interprets, understands and works to the requirements of mechanical drawings, sketches and work orders.\n, • Must have full understanding of Geometric tolerance control frames, interpretation of geometric symbols and application of tolerances associated with those symbols.\n, • Must be able to perform in-process and final inspections utilizing precision measuring instruments such as: Calipers up to 60 inches, outside micrometers up to 40 inches, inside micrometers, bore gages, thread gages, thread pitch micrometers, system 21 and system 22 thread check gages, height gages, groove micrometers, dial indicators, test indicators, co-axial indicators, surface comparators and other tools associated with first article and in-process inspections.\n, • Indicate and secure machine implements such as: vises, rotaries, indexing heads, sin plates, sub plates, custom fixtures and work piece clamps\n, • Sets up and operates saws, cut off saws, abrasive cut off saws, sheet metal brake, hydraulic press, hand press, radial-arm drill and belt sander.\n, • 3 years' experience in CNC Operation\n, • High school diploma or equivalent\n, • CAD/CAM or programming experience.\n, • Manual lathe and manual mill experience.\n, • Well versed in High-Speed steel cutting tools, carbide grades, and carbide profiles to ensure optimal material removal rates.\n, • Moderate understanding of metallurgy properties and material removal regarding roughing and finishing\n, • Sound interpersonal skills needed to establish good communication with co-workers.\n, • Ability to pass PQS 301 Craftsmen qualifications\n, • Ability to read mechanical drawings\n, • Ability to read technical work documents, technical manuals and maintenance standards\n, • Ability to read, interpret, and follow detailed written instructions.\n, • Ability to take instruction from machine shop supervision and execute tasks as instructed.\n, • Obtain and maintain a secret security clearance\n, • Degree in Integrated Machining Technology\n, • CMM operation\n, • CAD/CAM or programming experience at the control.\n, • Manual lathe and manual mill experience.\n, • Experience in reverse engineering components\n, • Well versed in High-Speed steel cutting tools, carbide grades, and carbide profiles to ensure optimal material removal rates.\n, • Moderate understanding of metallurgy properties and material removal regarding roughing and finishing\n, • Experience in high speed machining utilizing end mill flute length\n\n ADA Notations: Requires walking, reaching, sitting and concentration in the presence of occasional noise Ability to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships) Ability to lift, carry and move objects up to 50 lbs in weight Office, warehouse, laboratory, pier side, shipboard Noise conditions range from very quiet to loud Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary The Project Engineer has mastery of at least one core engineering principle and advanced knowledge of related engineering fields. The Project Engineer independently directs and technically manages engineering and design activities under the guidance of a Project Manager, and is responsible for tracking progress and technical adequacy of the design solution. The Project Engineer interacts with all ADTECH departments as necessary to provide engineering support to ADTECH manufacturing, integration, and test activities, and provides work leadership for lower level employees. Duties And Responsibilities ESSENTIAL \n • Develop and apply advanced engineering analytical and design methods, theories and research techniques, to complex engineering projects.\n, • Coordinate and supervise a team of engineers, designers, drafters, technical writers, and technicians.\n, • Review progress and evaluate results of work accomplished by self and others.\n, • Technically manage projects of moderate scope.\n, • Estimate resource requirements to meet technical and scheduling objectives.\n, • Review and approve the completion and implementation of technical products to meet the customer requirements.\n, • Demonstrate excellent technical judgment, independent evaluation and innovative solutions to problems.\n, • Write test procedures, conduct tests, compile and evaluate test data, and complete required documentation.\n, • Interact with customer representatives to define and manage customer expectations.\n, • Participate in Technical Working Groups to assess and improve ADTECH processes and capabilities.\n, • Assist in bid and proposal efforts by providing cost estimations, technical approach definitions, and input to baseline schedule data.\n, • Domestic and international travel, including shipboard operations.\n REQUIRED \n • Bachelor of Science degree in Mechanical Engineering or Equivalent experience, from an accredited institution.\n, • 5-10 years of practical technical experience in the engineering process, including concept development, analysis, design, drawing, integration and testing of complex mechanical and/or ocean deployed systems.\n, • 2 or more years of management experience leading multidisciplinary design teams.\n, • Responsible for producing significant portions of individual project mechanical designs\n, • Demonstrated ability to lead technical groups and interact with customer representatives.\n, • Proficiency in the application of current engineering software (i.e. SolidWorks, ANSYS, Matlab, etc), and Microsoft Office\n, • Able to apply an advanced knowledge of the principles, practices and procedures of mechanical engineering and an understanding of related engineering fields.\n, • Work closely with electrical, software, and systems engineers, as well as other cooperative disciplines, to solve problems and constructively architect a working system.\n, • Responsible and accountable for your results, working with considerable autonomy, but also knowing when to ask for assistance.\n, • Ability to obtain a United States Government Department of Defense Security Clearance (active clearances preferred, but not prerequisite)\n, • Must be a US Citizen.\n, • Desire to stretch and expand your talents, expertise, competency, and responsibilities.\n\n DESIRED \n • Advanced degree in Mechanical Engineering, Ocean Engineering or a related field, from an accredited institution.\n, • Exercise excellent technical judgement, creativity, and initiative with attention to detail consistently throughout your work product, with awareness of the "system" perspective.\n, • Strong communication, organizational and technical writing skills, including ability to effectively document, convey, and present engineering concepts and products to team members and customers.\n, • Knowledge and/or experience in the marine industry, fielding Ship Board systems and associated technologies.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary The Engineer IV applies advanced technical knowledge to Oceaneering's Marine Services Division's (MSD) engineering and design activities. This role is located in Chesapeake, VA. The Engineer IV provides technical leadership and oversight for large and/or complex projects under the direction of a Project Manager. This role assists the Design Engineering Manager and Project Manager in defining and managing resource requirements, schedule, and cost for projects under his/her cognizance. The Engineer IV interacts with other MSD personnel including those in QA, Manufacturing, Purchasing, Shipping and Receiving, as necessary to provide engineering support to MSD manufacturing, integration, and test activities. They direct an engineering design/production team in development of a design project/production availability throughout the entire cycle from initial concept/planning through successful completion. They complete assigned engineering projects in accordance with customer specifications and within schedule and budget limitations through coordinating activities of engineering team, contractors, and vendors. This role may require up to 25% travel. Duties And Responsibilities \n • Independently perform difficult engineering tasks to completion that may include a variety of complex features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others.\n, • Exhibit excellent technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions.\n, • Demonstrate ability to devise innovative solutions to problems.\n, • Develop objectives, schedules, and estimates for difficult assignments.\n, • Direct and supervise the activities of moderate to large size teams of engineers, tech writers, designers, and drafters.\n, • Review progress and evaluate results of work accomplished by self and others.\n, • Interact with customer technical representatives to define and manage customer expectations.\n, • Use team management skills to lead the design engineering group during various phases of a project or availability.\n, • Assess vendors for competence, capabilities, and resources.\n, • Review/approve Engineering Work Packages (e.g. TGIs) related to project.\n, • Review/approve Engineering Change documents (e.g. CRs, LARs, DFSs) related to project.\n, • Review/approve Engineering designs, models, drawings and calculation packages.\n, • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere. \n, • May assist in or lead Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data.\n REQUIRED: \n • Bachelor's degree in Engineering (Mechanical, Electrical, Ocean or Nuclear) or Naval Architecture from accredited college or university.\n, • Minimum ten (10) years engineering experience in complex systems design, manufacturing, and integration environment.\n, • Demonstrated ability to lead technical groups of more than five engineers, designers, and/or drafters.\n, • Familiarity with ISO 9000 design requirements.\n, • Proficiency in Microsoft Office products and CAD software, such as AutoCAD or SolidWorks or similar packages.\n, • Master's degree in related field.\n, • Proficiency in MathCad.\n, • Engineer in Training (passed FE exam).\n, • Excellent communications and organizational skills.\n, • Understands Finite Element Analysis -particularly Solidworks Simulation or ANSYS Workbench. Working knowledge of both is preferrable.\n, • Must be competent in system engineering methodologies.\n, • Experience performing Dynamic Design Analysis Method (DDAM) is a plus.\n, • Demonstrated knowledge of SUBAFE or SOC requirements is preferred.\n, • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields.\n, • Possesses a working knowledge of the manufacturing/integration aspects related to one or more technical fields related to MSD efforts.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Location: Chesapeake, Virginia.Some see the railway as transportation, while at Plasser American we see it as transformation.The story of how steel tracks turned the American promise into American progress and forged a trusted pathway to the possibilities of the future.It’s a story that continues

AdvanSix plays a critical role in global supply chains, innovating and delivering essential products for our customers in a wide variety of end markets and applications that touch people's lives, such as building and construction, fertilizers, plastics, solvents, packaging, paints, coatings, adhesiv

Clearance Requirement: Active Secret Clearance is required to start Travel Requirements: 5-10% Location: Dam Neck – Virginia Beach, VA SUMMARY: WR has a potential opportunity for a Mechanical Engineer, Senior in support of our NAVSEA P&EDM contract.The candidate will be responsible for the design

We empower our teams, contribute to our communities, and operate sustainably.Everything we do is built on a commitment to do the right thing for our customers, our people, and our community.Our Mission, Vision, and Values guide the way we do business.The Leidos Defense Group has a current opening fo

Proficiency with CAD software (SolidWorks, Solid Edge, AutoCAD, or similar).

Our client, a global power and electrification manufacturing leader, is seeking a Quality Engineer to join their team.As a Quality Engineer, you will be part of the Quality Engineering / Operations department supporting Manufacturing, Operations, and Cross‑Functional Quality Teams.The ideal candid

We empower our teams, contribute to our communities, and operate sustainably.Everything we do is built on a commitment to do the right thing for our customers, our people, and our community.Our Mission, Vision, and Values guide the way we do business.The Leidos Defense Group has a current opening fo

About Mercor’s talent network** Join our Graphic & UX/UI Designer Expert Network to connect with leading AI labs and companies seeking your expertise.This is an open application for future contract opportunities that match your background and interests.Once you complete your profile and pass our A