Trabajos welder en Illinois

Job Description A RARE OPPORTUNITY TO BE A PART OF AN EMPLOYEE OWNED COMPANY! DECKHAND Performs tasks associated with building and breaking tow, as well as towboat maintenance. This position is for a Fleet Deckhand, we do require employees to live within 60 miles of the location applied for. At this time we do not offer relocation assistance. Physical and Mental Job Description: The position requires climbing onto the tops of barges (height of approximately six feet), opening and closing barge lids that weigh up to 125 lbs. (Note: Employees are instructed to seek assistance when lifting heavy objects), and being able to walk safely on surfaces that can be wet or snow covered on occasions. Additionally, employees are frequently required to climb ladders and steps a distance of up to 25 feet and walk long distances throughout the work shift. Walkways are often narrow (approximately 2 feet in width) requiring good balance and coordination. Working areas are tight, enclosed, and do not allow a great deal of space from time to time. All employees must be able to wear personal protective equipment including a life vest, safety shoes, clothing, and hearing protection. Working conditions will vary with heat and cold extremes according to season. Additionally, the position requires working a combination of days and nights throughout the schedule. Work surfaces may be slippery and hazardous from time to time. Persons must be able to hear safety signals (such as horns, whistles, and the human voice), and be able to read and understand safety manuals and other written material such as labels, warnings, gauges and machinery instrumentation. The position requires effective written communication in order to complete required daily reports. Effective verbal communication is also necessary in order to allow the individual to give/receive instructions over a radio, loudspeaker or person to person. Knowledge of hand signals will also be required. Position requires the ability to remember and follow established procedures for maintaining and operating various diesel and gas engines, generators, compressors and winches used in the operation. In addition to the above, the deckhand position involves frequent heavy physical labor including: 1. Repeated bending, squatting, and use of hands and vision to perform detailed work;, 2. Frequent lifting and carrying of rigging weighing up to 70 lbs. over short and long distances;, 3. Strenuous pushing, pulling, and tugging of rigging from either a standing or kneeling position;, 4. Lifting, carrying, and placing of pumps weighing up to 125 lbs. (Note: Employees are instructed to seek assistance when lifting heavy objects); 1. Moving and carrying hoses weighing up to 70 lbs. by pulling, tugging, and dragging them long distances; and 1. Use of a sledgehammer and various other hand-held tools. JOIN THE WFS FAMILY AND YOU COULD ENJOY... • E.S.O.P. EMPLOYEE STOCK OWNERSHIP PROGRAM!!!!!, • Outstanding health Insurance including plan options!, • Full Prescription Coverage, • Disability insurance and additional Aflac coverage options, • Dental and vision insurance with additional discounts for health and wellness services, • Company paid life insurance and additional coverage options, • 401k and match with simple investment options, • 7 Company paid holidays. PTO with competitive wage, • Family Medical Leave, • Continued education and professional development such as CPR, • Career Advancement opportunities - Steersman Programs, Welder development, dispatch, and management opportunities., • Employee Recognition program with monthly and yearly prizes!, • Family atmosphere with company sponsored events such as lunches and year end party.

Job Description Normal Work Schedule: Hours of Work: 0700 - 1700 EST / Requires Travel to other Railroads 2-4 Hours Away Days of Work: MTWTF Note: The hours of work are established as needed by operations and at the direction of management and are subject to change by management as required. • Assist in performing daily, periodic, and annual inspections of locomotive in accordance with FRA regulations., • Inspect equipment components for compliance with FRA., • Diagnoses malfunctions in diesel engines, air equipment, trucks, or other components to determine nature of problem and needed repair or replacement., • Perform emergency repairs to locomotives., • Replaces locomotive and diesel engine components including, but not limited to wheels or trucks, traction motors, sprints, couplers, draft gear assembly, gear cases, cylinder heads, air compressor, and turbo chargers., • Perform daily service of locomotive units: sands, waters, lubricates, and oils; wipe down and cleans unit and windows., • Operate electrical and gas welding equipment to join a variety of metals and alloys; operate acetylene torches for cutting and/or shaping metal parts such as aluminum, cast iron, steel., • Comply with company safety policies and procedures; must wear required personal protective equipment., • Handle environmental issues in appropriate manner (e.g. proper disposal of filter oil, diesel fuel or other materials., • Help maintain written and computer records for maintenance and repairs as required., • Other duties as assigned., • Must be able to operate cutting torch and electrical welder., • Knowledge of the safe operation of the equipment used., • Must be able to utilize a computer for parts ordering, troubleshooting, emails, and files, • Experience in diesel mechanics highly preferred., • Electrical background high preferred, • Must have valid Driver's License, • High school education or GED, • Work outside in environmental conditions which at times include extreme heat and extreme cold; inside with poor ventilation., • Be able to lift and carry 100 pounds., • Stand 4-8 hours per day., • Climb stairs and ladders., • Support oneself on a ladder. Ability to pass a background check and drug screening.

Job Description The CWI performs a variety of duties necessary to ensure compliance with AAR, AWS, customer and internal regulations. • Develop Welding Procedure Specification (WPS) and Procedure Qualification Reports (PQR) per American Welding Society (AWS requirements), • Inspects and tests welded joints of work in progress and of completed units for visible defects, correct dimensions, joint strength, bead formation, weld penetration, and conformance with layout, blueprint, and work order specifications, applying knowledge of welding principles and metallurgical properties., • Observes techniques and evaluates performance of welders in the shop., • Reviews plans, contract documents, and specifications required for fabrication and defect repair., • Marks defective pieces and recommends scrapping or methods for reworking., • Train and certify welders to internal standards., • Maintain welder certification records., • Schedule and conduct welding audits, including creating and closing out audit findings and determining the proper corrective or preventative actions., • Conduct process and product audits, including creating and closing out audit findings and determining the proper corrective or preventative actions. Requirements: • AWS CWI Certification, • 5 years of writing and interpreting welding reading, • Blueprint and layout reading, • Ability to work independently, self-starting, self-directed., • Skilled with MS Office suite, especially data analysis, • Excellent communication and people skills, including the ability to lead small and large group meetings and cross-functional teams. Must be able to write clearly and concisely to prepare reports and correspondences. What we offer you: The base salary range for this position is $60,000 to $80,000. The exact salary will vary based on factors such as experience, skills, education, and location. In addition to base salary, this role is eligible for participation in a competitive bonus program based on individual and company performance. Amsted Rail offers a comprehensive and highly competitive benefits package designed to support employees’ health, well‑being, and long‑term financial security. Available benefits include: • Medical, Dental, Vision, and Prescription Drug coverage, • Life insurance, short‑term and long-term disability coverage, • Employee Stock Ownership Plan (ESOP) — Amsted Rail is 100% employee‑owned, • 401(k) plan with employer match, • Employee Assistance Program (EAP) and additional wellness resources, • Tuition reimbursement, education assistance, and career development programs, • Fitness membership reimbursement and health/well‑being reimbursements, • Charitable gift matching and volunteer opportunities, • Paid time off, including vacation, sick leave, and floating holidays Amsted Rail is an Equal Opportunity employer. All applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. To review our EEO Policies or to request assistance please go to www.amstedrail.com/careers/ and select EEO Compliance/Statements. To learn more about us, please visit us online at www.amstedrail.com. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities and any other basis covered by federal, state, or local law. #ff-dd

Job Description The CWI performs a variety of duties necessary to ensure compliance with AAR, AWS, customer and internal regulations. • Develop Welding Procedure Specification (WPS) and Procedure Qualification Reports (PQR) per American Welding Society (AWS requirements), • Inspects and tests welded joints of work in progress and of completed units for visible defects, correct dimensions, joint strength, bead formation, weld penetration, and conformance with layout, blueprint, and work order specifications, applying knowledge of welding principles and metallurgical properties., • Observes techniques and evaluates performance of welders in the shop., • Reviews plans, contract documents, and specifications required for fabrication and defect repair., • Marks defective pieces and recommends scrapping or methods for reworking., • Train and certify welders to internal standards., • Maintain welder certification records., • Schedule and conduct welding audits, including creating and closing out audit findings and determining the proper corrective or preventative actions., • Conduct process and product audits, including creating and closing out audit findings and determining the proper corrective or preventative actions. Requirements: • AWS CWI Certification, • 5 years of writing and interpreting welding reading, • Blueprint and layout reading, • Ability to work independently, self-starting, self-directed., • Skilled with MS Office suite, especially data analysis, • Excellent communication and people skills, including the ability to lead small and large group meetings and cross-functional teams. Must be able to write clearly and concisely to prepare reports and correspondences. What we offer you: The base salary range for this position is $60,000 to $80,000. The exact salary will vary based on factors such as experience, skills, education, and location. In addition to base salary, this role is eligible for participation in a competitive bonus program based on individual and company performance. Amsted Rail offers a comprehensive and highly competitive benefits package designed to support employees’ health, well‑being, and long‑term financial security. Available benefits include: • Medical, Dental, Vision, and Prescription Drug coverage, • Life insurance, short‑term and long-term disability coverage, • Employee Stock Ownership Plan (ESOP) — Amsted Rail is 100% employee‑owned, • 401(k) plan with employer match, • Employee Assistance Program (EAP) and additional wellness resources, • Tuition reimbursement, education assistance, and career development programs, • Fitness membership reimbursement and health/well‑being reimbursements, • Charitable gift matching and volunteer opportunities, • Paid time off, including vacation, sick leave, and floating holidays Amsted Rail is an Equal Opportunity employer. All applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. To review our EEO Policies or to request assistance please go to www.amstedrail.com/careers/ and select EEO Compliance/Statements. To learn more about us, please visit us online at www.amstedrail.com. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities and any other basis covered by federal, state, or local law. #ff-dd

Job Description Welders must have experience in all types of welding (mig, tig, stick). Experience in structural steel and frame Experience in construction, industrial maintenance, welding and pipefitting Must possess a high degree of safety awareness Must be mechanically inclined with a willingness to learn and accept instructions Must exhibit and ability to work in a physical demanding environment which may include heights and lifting of heavy objects. Working knowledge of hand powered tools Travel when jobs requires (per diem for travel outside the 100 mile radius of STL. & hotel paid at 100% with no room sharing) All candidates must pass a welding test (open root vertical upstick test 6010/7018) and a background/physical check. Apply in person or email resume. Job Type: Full-time

Job DescriptionWhy Join Menk USA? At Menk USA, we're building more than world-class transformer components-we're building careers. We are committed to providing a safe, collaborative, and rewarding workplace where employees are empowered to grow, develop their skills, and make a meaningful impact. What We Offer: Competitive pay Medical, dental, and vision insurance 401(k) with company match Paid holidays and paid time off Career development and advancement opportunities A safety-first culture built on teamwork, quality, and continuous improvement The opportunity to work for a growing, innovative manufacturing organization Position Summary Menk USA is seeking a motivated and dependable Welder to join our manufacturing team on 3rd Shift. In this role, you will perform MIG and TIG welding on transformer components while ensuring the highest standards of safety, quality, and productivity. Essential Responsibilities Perform MIG and TIG welding on steel components according to engineering drawings and work instructions. Operate oxy-fuel/torch cutting equipment to cut, repair, and modify materials. Read and interpret blueprints, engineering drawings, weld symbols, and production documentation. Inspect finished weldments using precision measuring instruments to ensure dimensional accuracy. Repair defective welds and replace components as needed. Maintain quality standards while meeting production schedules. Follow all company safety policies, procedures, and PPE requirements. Maintain a clean and organized work area using 5S principles. Support continuous improvement initiatives and perform other duties as assigned. Qualifications Working knowledge of MIG and TIG welding processes. Experience using oxy-fuel/torch cutting equipment. Ability to accurately perform dimensional measurements. Ability to read and interpret engineering drawings and blueprints. Basic computer skills. Strong attention to detail and commitment to quality. Ability to work overtime as needed. Experience One to two years of manufacturing and/or welding experience preferred. Education High School Diploma or GED required. Additional Requirements Must successfully pass a pre-employment background check and drug screening. Must complete all required training and demonstrate competency as defined by the Company's Training Matrix. Competencies will be evaluated through the Company's performance management process.

Job DescriptionDescription: Join Our Team Join a growing manufacturing organization serving customers across a variety of industries. Located in Millstadt, Illinois, within the greater St. Louis metropolitan area, MAC Medical offers an opportunity to build your career with a local manufacturer while being part of a growing organization. MAC Medical is known for having a team culture that works together and inspires us to be better! We are a family owned and operated business founded in 1998 which builds American made medical equipment. In 2020, our growing business started Copperworks Industries, a plastic laminate cabinet company. Join our team and grow with us! JOB SUMMARY TIG Welder will be responsible for welding, cutting, and brazing metal pieces and products by using flame-cutting and hand welding equipment. ESSENTIAL FUNCTIONS • Perform TIG welding on stainless steel, • Fabricate and assemble medical equipment components to specification, • Grind, polish, and finish welds to cosmetic and sanitary standards, • Inspect completed welds for accuracy, penetration, and quality, • Operate fabrication equipment including grinders, saws, and hand tools, • Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job., • Maintains, organizes, and cleans equipment and the work area., • Follow OSHA, company safety, and quality procedures, • Notifies supervisor when faulty equipment or defective materials are discovered., • Performs other related duties as assigned. Requirements: REQUIRED SKILLS AND KNOWLEDGE • Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models, and blueprints, • Basic understanding of mathematics as related to welding assignments, • Knowledge of welding symbols and fabrication techniques, • Ability to lift up to 50 pounds and stand for extended periods, • Strong attention to detail dn workmanship, • Must pass Skill Assessment for Tape Measure and Welding Test EDUCATION AND QUALIFICATIONS • High school diploma or GED required, • Completion of a Mac Medical apprenticeship, Welding Certificate, or 2-5 years TIG experience, • Experience in medical, food-grade, pharmaceutical, or clean-finish welding environments preferred BENEFITS • Medical insurance, • Dental insurance, • Vision insurance, • Life insurance, • Short-term disability, • Long-term disability, • Paid time off, • Paid holidays, • Employee assistance program, • 401(k), • 401(k) matching

Job Description FORGE / METAL FABRICATION / MANUFACTURING / PRODUCTION MACHINE OPERATOR Employee-Owned Company - Build Your Career - Premier Company – Great People Are you a hands-on person and enjoy working with hand tools? Would you like a career instead of a job? Are you results driven in the pursuit of excellence in your work? Do you have experience working with metal fabrication? We offer you…… • CAREER ADVANCEMENT, • SUPERIOR BENEFITS, • BONUS PLAN, • ESOP - EMPLOYEE STOCK OWNWERSHIP PLAN, • WEEKLY PAYCHECK Scot Forge is an employee-owned company that manufactures custom open die and rolled ring forgings used in demanding applications all over the world. HOURS- • 2nd Shift - 7 pm - 6 am, • We offer a 10% shift premium We have locations in Spring Grove, IL, Clinton, WI and Franklin Park, IL We conduct a hair follicle pre-employment drug screen, lift test up to 65 lbs. and background check. Essential Job Duties and Responsibilities- • Grind material defects with hand grinder or overhead grinder., • Repair forge tools with welder or grinder., • Coordinate pre-forge load with Blacksmith or appropriate forge personnel., • Load, unload, and operate furnace to maintain production schedule for forge cycles and post-forge thermal cycles in accordance with forge manual., • Remove scrap from the press pits, unload scrap in the appropriate dumpster according to metal type. Record weights on appropriate paperwork., • Locate material according to shop order information, verify material identity, visually examine material for defects, and transport material, scrap, and forgings throughout production area., • Fuel press support equipment, long reaches and fork trucks. Work as a heavy equipment operator., • Perform general housekeeping work - clean furnaces and floors. Grind out imperfections., • Actively participate to promote a safe and healthy work environment. Follow policies, programs and procedures for the reduction and elimination of industrial accidents. Employee Benefits include- • Employee Stock Ownership Plan, • Profit Sharing Bonus, • Medical, • Dental, • Vision, • Company provided Life Insurance, • Prescription Drug Plan, • 401K and Roth Plan, • Paid vacation and holidays, • Short- and Long-term disability, • Tuition Reimbursement Scot Forge is a 130-year-old, 100% employee-owned company that manufactures custom open die and rolled ring forgings. At Scot Forge, we help our customers with forged solutions from the world's physical infrastructure, energy, and transportation to manufacturing, mining, and our national defense. From the wheels of NASA’s Curiosity Mars Rover to mission critical components for nuclear submarines, to large hydraulic cylinders for the largest mining trucks on the planet, Scot Forge creates precision forged metal parts used in demanding applications all over the world. #1864 Qualifications - Required Skills • High school diploma / GED and completion, • Basic manufacturing or shop math (measuring and converting metrics, decimals…) Preferred Skills • Ability to read a tape measure and interpret blueprints., • Must be capable of performing a wide variety of tasks and react quickly., • Experience with a micrometer or caliper is a plus., • Previous experience with heavy equipment operation., • Previous experience with crane rigging and operation Helpful experience includes metal fabrication, heavy equipment operator, machine operator, roofing, seal coating, forging, casting, measurements, band saws, boring, gauges, grinding, trim, manufacturing, working with overhead cranes, material handling, farm equipment, skid steer, etc. The estimated pay range for this position is the lowest and highest range we in good faith believe we would pay for this role at the time of this posting. We ultimately may pay more or less than the posted range, and the range may be modified in the future. The actual pay offered to a candidate will depend on various factors including but not limited to relevant skills, experience, qualifications, education, certifications, seniority, geographic location and prevailing minimum wage, performance, shift, travel requirements, and business or organizational needs. We offer a comprehensive package of benefits for eligible employees including Medical, Vision, Dental, Hearing, Life (Basic & AD&D), Disability (STD & LTD), 401K Plan with match, Profit Sharing, Employee Stock Ownership Plan (ESOP), Tax Savings (FSA & H.S.A), Vacation Time, Paid Time Off, and Paid Holidays. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, or any other form of compensation for any particular employee remains in the Company’s sole discretion unless and until paid and may be modified at the Company’s sole discretion, consistent with the law. Scot Forge is an Equal Opportunity Employer. We value diversity and inclusion and welcome all qualified candidates to apply. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Job Description D7 Pneumatics LLC is seeking an experienced QA/QC Manager to support our fabrication shop and field operations based in Jonesboro, Arkansas. This position will begin on a part-time or as-needed basis, with the potential to develop into a full-time role based on workload and company growth. The QA/QC Manager will be responsible for implementing and maintaining D7’s Quality Control Program, supporting ASME and National Board Code work, and ensuring fabrication and field activities comply with approved procedures, project specifications and applicable codes. Key Responsibilities Administer and enforce the D7 Quality Control Manual and related procedures. Oversee quality activities for shop fabrication and field installations. Review contracts, drawings, specifications and project requirements before work begins. Confirm the applicable codes, standards, inspection requirements and testing procedures for each project. Maintain compliance with applicable ASME, National Board and pressure-piping requirements. Coordinate with Authorized Inspectors, client representatives, engineers and third-party inspection agencies. Verify that approved Welding Procedure Specifications are available and properly followed. Review and maintain WPS, PQR and Welder Performance Qualification records. Monitor welder qualifications and continuity. Verify material receiving, identification, storage and traceability. Review Material Test Reports and certificates of compliance. Maintain weld maps, weld logs, inspection reports and project turnover documentation. Establish and monitor inspection hold points. Perform or coordinate fit-up, visual welding and final inspections. Coordinate nondestructive examination, including RT, UT, MT and PT, when required. Ensure pressure testing is performed using approved procedures, calibrated equipment and proper safety controls. Monitor preheat, interpass temperature and postweld heat treatment when applicable. Manage nonconformance reports, corrective actions and weld-repair documentation. Maintain calibration records for inspection and testing equipment. Control Code stamps, data reports and quality records as assigned. Assist with ASME, National Board, Authorized Inspection Agency and client audits. Conduct internal quality audits and recommend improvements. Prepare complete and organized project turnover packages. Train supervisors, welders, fitters and shop personnel on applicable quality requirements. Maintain a professional, practical and safety-focused quality culture. Required Qualifications Previous QA/QC experience in industrial fabrication, pressure piping, power-generation, boiler or pressure-vessel work. Working knowledge of welding inspection and fabrication quality-control methods. Ability to read fabrication drawings, piping isometrics, P&IDs, weld maps and technical specifications. Knowledge of welding procedures, welder qualifications and material traceability. Experience administering inspection, examination and pressure-testing requirements. Strong documentation, organization and communication skills. Ability to work independently and coordinate effectively with project managers, supervisors, inspectors and clients. Proficiency with Microsoft Word, Excel, email and electronic recordkeeping. Willingness to support both Jonesboro shop operations and field projects as required. Preferred Qualifications Knowledge of ASME BPVC Sections I, II, V, VIII and IX. Knowledge of ASME B31.1 Power Piping and ASME B31.3 Process Piping. Experience with National Board Inspection Code repair and alteration requirements. Experience working under ASME U and S Certificates and a National Board R Certificate. AWS Certified Welding Inspector certification. ASNT or employer-based NDE qualifications. Experience dealing with Authorized Inspectors and jurisdictional authorities. Experience in power plants, pulp and paper facilities, steel mills, sawmills or other heavy-industrial facilities. Employment Structure This position is intended to begin as part-time or as-needed employment. Hours may increase based on active projects, shop workload and field requirements. The position has the potential to transition into a full-time QA/QC management role as D7’s Code fabrication and pressure-piping operations expand s.

Job DescriptionRate of Pay: $24.00 to $26.00 per hour (paid weekly).Overtime Rate: $36.00 to $39.00 per hour. 2nd Shift Schedule: • Monday thru Friday; 3:45pm to 12:15am., • 10+ hours of overtime consistently available; paid breaks. JOB SUMMARY:MAAC is looking for an experienced fabricator/welder with potential to grow into a leadership role. The primary tasks involve building machine frames and components out of structural steel, followed by tearing down completed machines to prepare for transport. • MIG welding and fabrication of machine frames and components that consist of light gauge sheet metal to heavy gauge tube, flat bar and I-Beam., • Fabricating industrial ovens, safety guarding, vacuum tanks, swing doors, fan brackets, catwalks., • Grinding and finishing completed products., • Perform quality checks on finished components., • Installing finished components into machine structures., • Disassembling machines for painting and shipping., • Material handling with sit-down forklifts and overhead cranes., • Typical workload is 80% Fabrication and 20% Welding. BENEFITS: • Training and teaching provided to apply your skillsets to a new industry, • Heavy promotion from within; multiple career progression paths., • Annual performance review and rate increase., • Earned vacation time and paid holidays., • Health coverage available., • Purchase assistance for required personal equipment., • Teammate appreciation events., • Referral pay for referring a friend or colleague., • Teammate assistance programs., • Good work-life balance including overtime choices., • Profit sharing available upon reaching qualified service time., • Reimbursement for qualified technical training., • Clean and modern environment with well-maintained equipment., • Stability of industry-leading company in business 40 years., • Equal opportunity employer; veterans encouraged. DESIRED SKILLS: • Minimum of 2 years of fabrication experience with various metals., • MIG welding experience., • Ability to read and interpret engineering blueprints., • Experience with saws, shears, drill presses, forklifts, and cranes are a plus.

Job Description Title: Industrial Welder (CWI) Location: Itasca, IL Hire Type: Direct Hire Shift : 1st Compensation: $38-45/hr Must have Skill Set: Certified Welding Instructor Certification Overview: We are hiring an experienced Certified Welding Inspector (CWI) to support high-quality industrial fabrication in a fast-paced manufacturing environment. This role is responsible for welding, inspection, and ensuring all assemblies meet strict quality, safety, and production standards. If you take pride in precision work and getting it right the first time, this is a great opportunity to join a strong, team-oriented operation. Job Duties: • Read and interpret blueprints, engineering drawings, and weld symbols, • Set up and operate MIG, TIG, Stick, and Gas welding equipment, • Prepare materials by cutting, grinding, cleaning, and aligning for proper fit-up, • Perform welding in flat, vertical, and overhead positions, • Inspect welds (visual and dimensional) to ensure compliance with specifications, • Identify and report non-conforming materials or quality issues, • Use hand and power tools to finish parts to drawing requirements, • Perform routine equipment maintenance and maintain accurate records, • Follow all safety procedures, PPE requirements, and environmental regulations, • Maintain a clean, organized, and safe work environment Qualifications: • Certified Welding Inspector (CWI) – required, • 5+ years of welding experience in a manufacturing or industrial environment, • Strong knowledge of MIG, TIG, Stick, and Gas welding processes, • Ability to read and interpret blueprints and weld symbols, • Experience with inspection, quality control, and documentation, • Familiarity with forklifts, overhead cranes, and lifts (preferred) Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job DescriptionDescription: Responsibilities • Under limited supervision and minimal technical guidance, positions material to be welded and applies hand-eye coordination to achieve the desired weld, • Emphasis is on ability to perform TIG welding of thin gauge stainless steel sheet and tubing, • Position, align, fit, and weld parts by following blueprints and layout specifications, • Inspects completed items for quality assurance Skills and Specifications • Ability to use welding techniques such as arc welding using a wire feeder, • Able to follow blueprints and other drawings, • Able to read a tape measure, • TIG welding experience with stainless steel sheet (18 -20 gauge) and tubing(.035-.062t), • High School Diploma, • Vocational Schooling, • Must pass TIG welding practical test Physical Requirements • Must be able to stand for 8-10 hours per day, • Must be able to lift up to 75 pounds, • Must be able to work in an area that is not climate controlled in the summer months, • Must be able to bend, stoop and reach on occasional basis Classification: Hourly Pay Range: $18-22 Requirements:

Job Description Hyspan is a 100% Employee-Owned Company. This means each employee has a stake in his or her work product and the value of the company through an ESOP (Employee Stock Ownership Plan). Don't be just a number join one of the Hyspan Companies and be an OWNER! All full-time regular employees are eligible for health benefits on the first day of the next month following 30 days of fulltime employment. United Healthcare is our provider for all coverages (medical, vision, dental, Life and Disability. Each employee is provided with $25,000 life and AD&D life insurance plan as part of their benefit package. Job Summary We are looking for an experienced TIG Welder to join our manufacturing team. Our ideal applicant has experience TIG welding stainless steel and aluminum, as well as experience with MIG welding processes and various grinding tools. You must be able to read blueprints or technical schematics. We expect our team members to have strong attention to detail in order to ensure the quality of each weld and the safety of the workplace. Duties/Responsibilities • Use gas tungsten arc equipment as part of the fabrication process, • Install or repair metal components, • Use grinding equipment in the cleaning process, • Follow blueprints or technical schematics, • Ensure compliance with established health/safety policies and regulations, • Carry out grinding and thermal cutting operations to obtain various textures and sizes for metal parts, • Oversee the set-up of TIG welding equipment, • Operate power and hand tools such as arc welders, buffing machine, and scrapers, • Maintain good working knowledge of the welding characteristics of metals such as stainless steel, aluminum, and titanium, • Read and interpret welding blueprints, schematics, and codes, • Ensure welding operations meet set specifications and construction requirements, • Oversee the training and mentoring of new and trainee TIG welders, • Perform TIG welding on materials such as fiberglass, iron, plastic, and copper, • Conduct radiographic and bend tests to verify the quality of weld. Education & Required Skills • High school diploma or GED certificate, • Completion of technical training or apprenticeship, • Attention to detail, • Knowledge of both TIG and MIG welding preferred, • Welding certification preferred

Job DescriptionFull Time TIG Welder - Stainless SteelPosition Overview We are seeking a highly skilled and experienced TIG Welder specializing in stainless steel fabrication to join our growing manufacturing team. The ideal candidate will possess exceptional welding expertise, demonstrate precision in their craft, and have a proven track record of producing high-quality welds on stainless steel materials. This full-time position requires an individual who can work independently, interpret complex blueprints, and maintain the highest standards of quality and safety in a fast-paced production environment. As a TIG Welder specializing in stainless steel, you will be responsible for performing tungsten inert gas (TIG) welding operations on various stainless steel components, assemblies, and structures. You will work closely with our fabrication team to ensure all projects meet exact specifications, quality standards, and delivery timelines. Primary Responsibilities • Precision TIG Welding: Perform high-quality TIG welding on stainless steel materials of varying thicknesses and grades, including 304, 316, and other specialty alloys. Execute welds in all positions (flat, horizontal, vertical, and overhead) while maintaining consistent quality and appearance., • Blueprint Interpretation: Read, interpret, and work from detailed engineering drawings, blueprints, technical specifications, and welding symbols to understand project requirements, dimensions, tolerances, and welding procedures., • Fabrication Support: Collaborate with the fabrication team to assemble, fit, and tack components prior to final welding. Ensure proper alignment, fit-up, and positioning of parts according to specifications.Education & Preferred Experience, • At least 2 years of TIG welding experience, • Orbital welding experience a plus

Job Description The CWI performs a variety of duties necessary to ensure compliance with AAR, AWS, customer and internal regulations. • Develop Welding Procedure Specification (WPS) and Procedure Qualification Reports (PQR) per American Welding Society (AWS requirements), • Inspects and tests welded joints of work in progress and of completed units for visible defects, correct dimensions, joint strength, bead formation, weld penetration, and conformance with layout, blueprint, and work order specifications, applying knowledge of welding principles and metallurgical properties., • Observes techniques and evaluates performance of welders in the shop., • Reviews plans, contract documents, and specifications required for fabrication and defect repair., • Marks defective pieces and recommends scrapping or methods for reworking., • Train and certify welders to internal standards., • Maintain welder certification records., • Schedule and conduct welding audits, including creating and closing out audit findings and determining the proper corrective or preventative actions., • Conduct process and product audits, including creating and closing out audit findings and determining the proper corrective or preventative actions. Requirements: • AWS CWI Certification, • 5 years of writing and interpreting welding reading, • Blueprint and layout reading, • Ability to work independently, self-starting, self-directed., • Skilled with MS Office suite, especially data analysis, • Excellent communication and people skills, including the ability to lead small and large group meetings and cross-functional teams. Must be able to write clearly and concisely to prepare reports and correspondences. What we offer you: The base salary range for this position is $60,000 to $80,000. The exact salary will vary based on factors such as experience, skills, education, and location. In addition to base salary, this role is eligible for participation in a competitive bonus program based on individual and company performance. Amsted Rail offers a comprehensive and highly competitive benefits package designed to support employees’ health, well‑being, and long‑term financial security. Available benefits include: • Medical, Dental, Vision, and Prescription Drug coverage, • Life insurance, short‑term and long-term disability coverage, • Employee Stock Ownership Plan (ESOP) — Amsted Rail is 100% employee‑owned, • 401(k) plan with employer match, • Employee Assistance Program (EAP) and additional wellness resources, • Tuition reimbursement, education assistance, and career development programs, • Fitness membership reimbursement and health/well‑being reimbursements, • Charitable gift matching and volunteer opportunities, • Paid time off, including vacation, sick leave, and floating holidays Amsted Rail is an Equal Opportunity employer. All applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. To review our EEO Policies or to request assistance please go to www.amstedrail.com/careers/ and select EEO Compliance/Statements. To learn more about us, please visit us online at www.amstedrail.com. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities and any other basis covered by federal, state, or local law. #ff-dd

Job Description Come fly with Regal Rexnord and watch your career soar! Join the winning team with a company that offers excellent opportunities to grow your career. Based on experience we will offer $24.00-$35.00/Hr., $2/hr shift premium for 2nd & 3rd shift, along with a very competitive benefit package, including 401(k) with a match, that starts day one. We are located in a climate controlled building. Regal Rexnord’s Aerospace and Defense business is on an upward trajectory, we are rapidly growing, and we have opportunities to add new team members. Are you interested in joining a growing team that is offering a $4,000 sign-on bonus paid out in increments over your first year. Rexnord Aerospace supplies high performance spherical and cylindrical bearings, mechanical seals, gears and electrical components to commercial air transport markets. Our products are engineered to meet stringent requirements and are specified in engine systems, flight control systems, landing gear systems and airframe structures. Our global customer base includes major engine and airframe OEMs, tier suppliers and aircraft operators. Perform duties to set up and operate a number of different computerized numerical controlled machine tools to perform a wide range of turning, drilling, milling, tapping, or resistance spot welding operations on precision machined components in a work-cell environment. Follow quality and safety rules and keep work area in a clean and orderly condition. Shifts available: 3rd shift-10pm-6am (possibility for training on 1st shift-6am-2pm).$2/hr shift premium for 2nd & 3rd shift, starts day 1. What you will do: • Work from process sheets, blueprints, setup sheets, setup cards, machine status boards, and verbal as well as written instructions., • Machine and install or re-cut chuck jaws as required., • Insert and secure tooling in machine turrets., • Use hand tools and manual machines as needed, • Perform machine set ups as required., • Download and upload programs into machine, and make minor programming adjustments as needed., • Operate different types of computerized numerical controls to manufacture a finished machined product by performing a wide range of machining operations within tight tolerances., • Make adjustments to offset coordinates to compensate for materials, tooling or machine center conditions., • Perform basic troubleshooting and make appropriate adjustments., • May be required to train less experienced machinists., • Set up and verify preset gauges for proper calibration as required., • Work with supervisor, programmer & support teams to resolve problem situations as required., • Inspect own work for correct dimensions and ensure that company quality and quantity standards are maintained and complete required documentation. Will be required to inspect the work of other machinists., • May be required to operate multiple machines., • Rotate between various department work centers as required and perform other related duties as assigned., • Enters data into ERP system., • Supports continuous improvement/RBS activities., • Load and unload component piece parts with weights up to 25 lbs What is needed • “Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a ‘U.S. Person’, which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States, or who otherwise can qualify for a license that permits them to hold the position.”, • Previous experience and demonstrated proficiency in operating CNC lathe, CNC mill machines, or resistance spot welder (any combination of two machines), with intermediate knowledge and experience with setting up machines., • Requires a high school education or equivalent experience., • Minimum of 2 years of related experience, and knowledge of machining principles and methods for computer numerical controlled machine tools required, • Demonstrated ability to perform basic mathematical calculations., • Must be able to read and interpret work instructions and blue prints in English., • External candidates will be required to pass a Machinist test which measures mechanical aptitude., • Moderate physical demand required to insert tooling, set up work centers, inspect workpieces and make machine adjustments, which is equivalent to continuously lifting or moving light weight material. Must be able to lift up to 50lbs and stand for an entire shift. Total Rewards and Benefits • Competitive Hourly Salary – along with $2/hr Shift Differential for 2nd & 3rd shift, • Robust Benefits Package Medical, Dental, Vision, STD, LTD, AD&D, Life Insurance, Matching 401(k) Contribution, HSA & FSA Savings Account, • Educational Reimbursement Equal Opportunity Employer – Minority/Female/Disability/Veteran You should be proficient in: • CNC Machine Setup & Changeover, • Precision Measurement & Hand Metrology Machines & technologies you'll use: • CNC Mill (3-4 axis VMC), • CNC Lathe (2-4 axis), • CNC Mill (5+ axis VMC), • CNC Lathe (5+ axis)

Job DescriptionOverview We are currently hiring for multiple Metal Fabrication roles to join our growing team in Morton, IL. If you have experience working with metal and take pride in precision and quality craftsmanship, we want to hear from you. Our fast-paced production environment offers opportunities to work with a variety of equipment and processes. We are seeking candidates for the following roles: Welders, Press Operators, CNC Operators, Laser Operators, and Painters. Key Responsibilities • Read and interpret blueprints, technical drawings, and job specifications, • Set up and operate metal fabrication equipment, including CNC machines, welders, plasma cutters, grinders, and spot welders, • Measure, cut, and shape materials to precise specifications, • Assemble metal components using welding and other fastening techniques, • Inspect finished products to ensure quality standards and accuracy, • Maintain a clean, organized, and safe work environment in compliance with safety guidelines, • Work collaboratively with team members to improve processes and production efficiency, • Assist with training and mentoring less experienced team members as neededQualifications, • Minimum of 1 year of experience in metal fabrication or a related field, • Ability to read and interpret blueprints and technical drawings, • Working knowledge of welding methods and fabrication tools, • Strong attention to detail and problem-solving skills, • Ability to work independently as well as in a team environment, • Good communication skills and a positive, team-oriented attitude, • High school diploma or equivalent required; trade certifications are a plus You should be proficient in: • Troubleshooting Skills, • CNC Programming, • Tape Measure Reading, • Blueprint Reading Machines & technologies you'll use: • CNC Mill (3-4 axis VMC), • MIG Welder, • Manual Grinder, • CNC Laser Cutter, • CNC Lathe (2-4 axis), • Punch Press, • CNC Mill (5+ axis VMC), • CNC Lathe (5+ axis), • Hydraulic Shear / Shearing Machine

Job Description Facilities Engineer Manager Oak Brook, IL (On-site) Compensation: $140,000 to $160,000 plus bonus (based on education and experience) *MUST HAVE MANUFACTURING EXPERIENCE* About the Role A fifth-generation, family-owned food manufacturer with over 100 years in business is looking for an experienced Facilities Engineer to take ownership of facility engineering at one of its large-scale, highly automated Chicago manufacturing campuses. This is a newly created role designed to bring dedicated facilities engineering leadership to a complex, busy facility. The title is Facilities Engineer, not maintenance, and that is intentional. This role is designed to attract manufacturing engineers who understand how large industrial facilities operate and can manage the full scope of facility systems, contractors, and infrastructure. About the Company One of the most storied names in food manufacturing, this fifth-generation family-owned company has been operating for over 100 years and shows no signs of slowing down. They continue to grow through acquisitions and new product development, investing in cutting-edge facilities and processes while maintaining the culture and values that have made them an employer of choice for decades. People who work here describe it as a company that treats employees like individuals and genuinely invests in their success. Responsibilities • Oversee all facility engineering functions including stationary engineering, HVAC, boilers, building maintenance, and building systems, • Manage on-site contractors including electricians, cement contractors, and other trades; ensure all work meets facility standards, timelines, and safety requirements, • Supervise stationary engineers and support welder certification requirements across the facility, • Oversee wastewater treatment systems on-site and ensure compliance with applicable regulations, • Develop and manage capital project budgets, scopes, and schedules for facility improvements and infrastructure upgrades, • Ensure compliance with all applicable codes, OSHA requirements, and safety standards, • Drive preventive and predictive maintenance programs for all facility systems, • Partner cross-functionally with operations, maintenance, and engineering teams to minimize downtime and support production, • Identify opportunities for facility improvements and lead implementation of upgrades and modifications, • Maintain accurate documentation including drawings, specifications, permits, and compliance recordsRequirements, • BS/BA in Engineering, Facilities Management, or a related field preferred; an equivalent combination of stationary engineering or maintenance certifications, or 5 or more years of facilities engineering leadership experience in a manufacturing environment will be considered, • Stationary Engineer's license preferred or willing to obtain it, • 7+ years of plant or facilities engineering experience in a manufacturing environment is required; must come from manufacturing, not commercial or residential facilities, • Hands-on background with facility systems including HVAC, boilers, electrical distribution, and related infrastructure, • Experience managing on-site contractors across multiple trades, • Relevant certifications and licenses are valued heavily alongside or in place of a degree, • Welding certification knowledge and experience overseeing welder qualification programs is a plus, • Strong project management skills including budgeting, scheduling, and contractor coordination, • Food or CPG manufacturing experience is not required; strong candidates from other industrial manufacturing environments are welcome, • Excellent communication skills with the ability to work across departments and with diverse teamsCompensation and Benefits, • $140,000 to $160,000 base salary plus bonus based on education and experience, • Medical, dental, and vision coverage, • 401(k) with company match, • Pension plan, • Long-term and short-term disability, • Fifth-generation, family-owned company with over 100 years of stability and a genuine commitment to its people This is a role for someone who takes ownership of a facility, knows how to manage complex systems and contractors, and wants to be a key part of a manufacturing operation that has stood the test of time. If that describes you, apply now and let's talk. #ZR \nCompany Description The team at JSK Recruiting, Inc. prides itself on providing boutique-level services combined with the resources of a larger recruiting firm. We forgo the traditional nine-to-five workday model in favor of complete accessibility. We are here for our clients and candidates when they need us most. With 12 years of experience in the field of supply chain and manufacturing recruiting, we maintain the relationships that employers are looking for in a recruiting firm as well as those that talented professionals need when they are ready to make a career change. At JSK Recruiting, we provide complete recruiting services, from sourcing candidates to organizing the interview process. Finding both long-term employees and rewarding careers across manufacturing and supply chain positions has never been easier. The team at JSK Recruiting, Inc. prides itself on providing boutique-level services combined with the resources of a larger recruiting firm. We forgo the traditional nine-to-five workday model in favor of complete accessibility. We are here for our clients and candidates when they need us most.\r\n\r\nWith 12 years of experience in the field of supply chain and manufacturing recruiting, we maintain the relationships that employers are looking for in a recruiting firm as well as those that talented professionals need when they are ready to make a career change.\r\n\r\nAt JSK Recruiting, we provide complete recruiting services, from sourcing candidates to organizing the interview process. Finding both long-term employees and rewarding careers across manufacturing and supply chain positions has never been easier.

Job Description Job Title: Specialty Technician - Mechanical Classification: Non-Exempt Build your career with Alto Ingredients! Earn a competitive salary, benefits including Medical, Dental, Vision, Life Insurance and 401k with a company dollar-for-dollar match up to 6%, a stipend for fitness center expenses, a generous vacation policy, and service awards for career longevity. Alto Ingredients values the communities where we work and live and offers an extra 8 hours of paid leave for employees who volunteer their time and talents in their community. Environment: Alto Ingredients, Inc. (NASDAQ: ALTO) is a leading producer and distributor of specialty alcohols, renewable fuels and essential ingredients. Leveraging the unique qualities of its facilities, the company serves customers in a wide range of consumer and commercial products in the Health, Home & Beauty; Food & Beverage; Industry & Agriculture; Essential Ingredients; and Renewable Fuels markets. For more information, please visit www.altoingredients.com. Our Pekin campus produces products destined for Health, Home& Beauty; Food and Beverage; Industry & Agriculture; Essential Ingredients; and Renewable Fuels markets. All personnel are responsible for the safety of these products, which includes participation in training, following cGMP and feed/food safety requirements in the facility, and following procedures per instruction of management. Job Purpose: Perform work involving the skills of multiple trades or craft occupations to keep machines, instrumentation, electrical equipment and components, control systems, or the infrastructure of an establishment in repair. The following is a list of major duties and responsibilities for this position along with certain supportive duties. It is not all-inclusive. Other duties and responsibilities may be added as needed and in addition, management may modify this job description as needed. Essential Duties and Responsibilities: • Work duties involves various skillsets including those of a millwright, pipefitter, iron worker, plumber, boiler maker, insulator, welder, machinist, carpenter, and mechanic., • Perform routine, preventive, and predictive maintenance as scheduled., • Install, monitor, maintain, repair, and replace equipment as required., • Housekeeping as required. Maintain high department and plant sanitation standards. Monitor and maintain all compliance requirements., • Work overtime as required., • Perform other duties assigned by management as required., • Schedules, shifts, and days off subject to change. Education/Experience: • Reading, writing, math, and computer and Microsoft Office Software knowledge., • High School Diploma or equivalency., • Welding experience (Stick, TIG, and MIG) preferred., • Also, must meet at least one of the following:, • 4 Year Technical or Vocational Degree in an Industrial Mechanical Maintenance field of study., • 2 Year Technical or Vocational Degree and a Minimum 2 years’ experience in an Industrial Mechanical Maintenance related position., • Minimum 4 years of experience in an Industrial Mechanical Maintenance related position., • Successfully completed an approved training program or skilled trade apprenticeship program. Qualifications: • Technician must operate in a safe, compliant, efficient, and productive manner. Wear all safety equipment as required., • Mechanical and Electrical skills required., • Knowledge of computers necessary. Ability to enter required data on computers including EAM maintenance program., • Ability to work on multiple tasks simultaneously. Ability to work under pressure of deadlines., • Handle hazardous chemicals such as alcohol, caustic, acids, oils, and lubricants etc., • Strong verbal & written communication skills. Has strong working knowledge of the English language. Ability to interpret and follow written and verbal instructions. Ability to work in a team environment. Works well with others. Ability to perform job tasks with minimal supervision., • Stays informed and in compliance of all daily, weekly, or routine assignments delivered from management in the format of written or verbal communications., • Strong mathematical skills required, basic arithmetic, algebra, and geometry, • Must be able to qualify on the operation of heavy equipment including: Fork Truck, Skid steer, Wheel Loader, Trackmobile, and JLG. Physical Requirements: • Must be able to work in cold to hot temperatures; work around dust, fumes, and/or moderate to loud noises; works inside and/or outside., • Able to lift, pull, carry, and pick-up average to heavy objects weighing up to 50 pounds., • Able to climb stairs and ladders; walk on paved and unpaved surfaces; sit at a desk and operate a computer and keyboard; visual acuity to review written documentation; ability to hear, speak, and understand speech at normal room levels and on the telephone; manual dexterity to operate a telephone; lift horizontally and vertically, bend, stoop, stand, and reach., • Work environment involves some exposure to hazards or physical risks, which require following basic safety precautions., • Climb and work in high places and/or from ladders, roofs, etc., • Work in confined spaces. Work in dusty conditions: milo, corn, feed-grain dusts. Criminal background check and drug screen required. Alto Ingredients, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description TIG Welder Location: St. Charles, IL Pay: $25–$30/hr, based on experience Schedule: 1st Shift Job Type: Full-Time Position Overview We are looking for an experienced TIG Welder to join our team in St. Charles. This position is ideal for someone with strong TIG/GTAW experience, particularly with pipe and stainless steel, who takes pride in producing clean, precise welds. Responsibilities Perform TIG/GTAW welding on pipe and metal components Weld stainless steel and other materials according to specifications Read and interpret blueprints, drawings, and welding instructions Complete welds to quality and dimensional standards Perform fit-up, setup, and preparation prior to welding Inspect finished welds and make adjustments as needed Maintain a clean and safe work area Follow all safety and quality procedures Qualifications 3–5 years of welding experience preferred Strong TIG/GTAW welding experience Pipe welding experience strongly preferred Experience with 6G pipe welding and open-root welding is a major plus Experience welding stainless steel preferred Ability to read blueprints and technical drawings Strong attention to detail and quality Ability to work independently and as part of a team Compensation & Benefits $25–$30/hr, depending on experience and skill level Full-time, 1st shift position Opportunity to work with a skilled manufacturing team Benefits available

Job DescriptionRate of Pay: $24.00 to $26.00 per hour (paid weekly).Overtime Rate: $36.00 to $39.00 per hour. 1st Shift Schedule: • Monday thru Friday; 7:00am to 3:30pm., • 10+ hours of overtime consistently available; paid breaks. JOB SUMMARY:MAAC is looking for an experienced fabricator/welder with potential to grow into a leadership role. The primary tasks involve building machine frames and components out of structural steel, followed by tearing down completed machines to prepare for transport. • MIG welding and fabrication of machine frames and components that consist of light gauge sheet metal to heavy gauge tube, flat bar and I-Beam., • Fabricating industrial ovens, safety guarding, vacuum tanks, swing doors, fan brackets, catwalks., • Grinding and finishing completed products., • Perform quality checks on finished components., • Installing finished components into machine structures., • Disassembling machines for painting and shipping., • Material handling with sit-down forklifts and overhead cranes., • Typical workload is 80% Fabrication and 20% Welding BENEFITS: • Training and teaching provided to apply your skillsets to a new industry., • Heavy promotion from within; multiple career progression paths., • Annual performance review and rate increase., • Earned vacation time and paid holidays., • Health coverage available., • Purchase assistance for required personal equipment., • Teammate appreciation events., • Referral pay for referring a friend or colleague., • Teammate assistance programs., • Good work-life balance including overtime choices., • Profit sharing available upon reaching qualified service time., • Reimbursement for qualified technical training., • Clean and modern environment with well-maintained equipment., • Stability of industry-leading company in business 40 years., • Equal opportunity employer; veterans encouraged. DESIRED SKILLS: • Minimum of 2 years of fabrication experience with various metals, • MIG welding experience., • Ability to read and interpret engineering blueprints., • Experience with saws, shears, drill presses, forklifts, and cranes are a plus.

Job Description Job Title: Tig Welder / Fabricator 1st shift Location: Elgin, IL Job Type and Duration: Direct Hire Pay range: 24-30/HR Hours: 7am-3:30pm Job Description: Under general supervision our TIG Welders fabricate stainless steel assemblies for food packaging equipment. We work mainly with 16ga up to 1⁄4” stainless steel. Welders fabricate and weld in their own workstation with all consumables provided. Responsibilities: • Assemble components to strict tolerances and standards., • Food grade welding and grinding., • Safe operation of machines and tools., • Perform any assembly-type functions using hand or power tools., • Operate equipment needed to perform the job., • Follow workplace safety standards., • Assist team members if needed to meet daily production goals., • Assist in problem-solving and continuous improvement., • Ability to communicate., • Other duties as assigned. Requirements: • High School diploma or GED., • Certificate in welding from accredited school preferred but not required., • Ability to read and understand mechanical blueprints., • Welding hood and work boots required., • Good mechanical ability and manual dexterity are essential (able to stand for long periods of time)., • Able to safely lift up to 50 pounds at varying frequencies., • Capable of adhering to Standard Work., • Ability to work as part of a team., • Ability to work overtime as required., • Must pass a background check and drug screen including THC.\nCompany Description ESPO Engineering, established in 1965, is a premier Technical Recruiting and Staffing firm. ESPO employees may enjoy a full range of benefits from 401(k), Premium Health Insurance, Dental, Disability, Direct Deposit, PTO time and Holiday Pay. Apply now and see why so many professionals choose ESPO to help advance their careers. View jobs: www.espocorp.com/jobs ESPO Engineering, established in 1965, is a premier Technical Recruiting and Staffing firm. \r\n\r\nESPO employees may enjoy a full range of benefits from 401(k), Premium Health Insurance, Dental, Disability, Direct Deposit, PTO time and Holiday Pay. Apply now and see why so many professionals choose ESPO to help advance their careers. \r\nView jobs: www.espocorp.com/jobs

Job Description TIG Welder OT available 1st shift 7:00 AM - 3:30 PM Starts at $24 / hour, can pay more depending on qualifications: Day to day responsibilities: Read and interpret blueprints, weld symbols, engineering drawings, and work orders. Perform TIG (GTAW) welding on stainless steel components and assemblies. Weld sheet metal, tubing, and structural components to precise specifications. Prepare materials by cleaning, grinding, beveling, and fitting parts before welding. Set up and adjust welding equipment according to material thickness and job requirements. Inspect parts for proper fit-up before welding to ensure dimensional accuracy. Produce clean, sanitary welds that meet food-grade manufacturing standards. Grind, polish, and finish welds as required to meet cosmetic and quality specifications. Verify weld quality through visual inspection and measuring tools. Repair weld defects and rework components when necessary. Maintain tight tolerances while minimizing heat distortion and warping. Collaborate with fabrication, machining, and assembly teams to complete production schedules. Safely operate shop equipment such as: Angle grinders Belt sanders Drill presses Band saws Material handling equipment Follow all welding procedures and quality control standards. Maintain a clean and organized welding station using good housekeeping practices. Perform routine maintenance and inspection of welding machines, torches, and related equipment. Follow all OSHA and company safety procedures, including proper PPE usage. Complete production paperwork and document completed work as required. Assist with fabrication, assembly, or other shop duties as production demands.

Job Description METAL FABRICATION (ORNAMENTAL, ARCHITECTURAL AND SOME STRUCTURAL) Full Time opening for a skilled and motivated fabricator/welder to fill a vacancy in our busy non union shop. We are a high end Ornamental Metal Fabrication shop located in Bartlett, IL looking to grow our team. We fabricate a lot of custom railings, gates, fencing, stairs, doors and much more. We mainly use carbon steel but also have aluminum, stainless steel, bronze, and brass projects. We work on both residential and commercial projects. Qualifications: • Knowledge of hand tools, • Ability to understand oral and written instructions of a technical nature, • Effective English reading and writing communication skills, • Ability to operate different industrial tools, and to troubleshoot equipment problems, • Good interpersonal and teamwork skills, • Ability to lift in excess of fifty pounds, • Ability to drive with a valid license when asked, • Have prior experience in Ornamental Metal Fabrication and Installation, • Layout projects, measure, cutting, sawing and bending, • Welding experience or AWS certification, • Hand Grinding experience, • Plasma Cutting experience, • Prepare, Fabricate and Weld various project **We often hand forge items for projects, having prior experience is a plus

Job DescriptionDescriptionThe Foreman will perform installation and maintenance of low-sloped roof systems and membranes. Candidate will be proficient in reading and following manufacturer installation and warranty conditional specs, as well as operating within company outlined safety standards. Journeymen will creat client reports via tablet. Supports the Foreman with communication, training, and directing crew members as needed. Key Responsibilities • Install and maintain low-sloped roof systems (TPO, PVC, BUR, modified bitumen, EPDM); 5+ years experience preferred., • Operate tools and equipment including Leister welder, hot air gun, and propane torch (preferred)., • Follow job specs, warranties, safety guidelines, and quality standards., • Create client reports via tablet and use technology for communication/receipts., • Support Foreman with communication, training, and directing crew members. Skills, Knowledge and Expertise • Prior roofing or related trade experience is preferred but not required., • Ability to communicate professionally and effectively, • Ability to operate handheld technology such as tablets and/or smartphones Benefits • Work equipment including company phone, company vehicle, all tools and material included, • Medical, Dental & Vision Insurance, • Pet Insurance, • Short Term Disability, • Employer-matched 401(k), • Paid Time Off, • Health Savings & Flexible Spending Accounts (HSA) & (FSA), • Enterprise Discounts

Job DescriptionAssembly Mechanic - 1st & 2nd Shift. Senior Assembly Mechanic - Komar/Maren Engineering. Summary: • Starting Rate: $21.00 - $25.00/Hour., • Full-time., • Benefits:, • 10 Vacation Days (Paid Time Off), • 9 Holidays., • Attendance Bonus., • 401K with company match., • Medical, Vision, Dental, Life Insurance. About Komar/Maren:Komar/Maren Engineering is an industry-leading recycling baler manufacturer located in South Holland, Illinois. Since 1962, Maren Balers and Shredders has manufactured the world’s best balers and shredders. Our balers handle high volumes of material with low labor inputs creating high quality and quantity recycled materials. We are seeking self-motivated individuals with solid mechanical skills and a desire to learn electrical and hydraulic connections. You will be working from prints, drawings, and instructions to perform builds. Prior experience with hydraulic, electrical, and MIG/stick welding is a definite plus. A strong work ethic and a passion to learn the field inside and out is absolutely required. This is not a repetitive function; every machine requires free thinking and extreme diligence. We design and manufacture our machinery from the ground up, and this position provides a great opportunity to strengthen your personal skills and knowledge with an ever-growing company. Essential Duties and Responsibilities include the following. Other duties may be assigned: • Quality, productivity, etc., • Participate in supervisor meetings as required., • Expertise in low and high-voltage point-to-point wire connections per supplied electrical schematic., • Proficient in Hydraulic systems, hydraulic layout, and operation., • Assemble parts to complete a machine using hand and power tools., • Perform efficient and quality MIG welding of various metal thicknesses., • Have complete understanding of all products that are built, with limited guidance and support., • Use a variety of handheld and precision measuring tools., • Reading blueprints & schematics for mechanical builds., • Accurately read a tape measure and use precision measuring tools., • Position parts & sub-assemblies by using templates or reading measurements., • Manufacture hydraulic hoses., • Test equipment to make sure it is operating correctly., • Set up hydraulic system pressures., • Certified to operate a forklift and overhead crane., • Rig machinery when needed., • Willing to travel up to 25%., • Travel reimbursement. Qualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: • Ability to perform work using electrical, mechanical, and hydraulic schematics., • Experience with electrical assembly and troubleshooting., • Experience with hydraulic systems and troubleshooting., • Experience with electrical, mechanical, and hydraulic machine assembly., • Requires limited supervision to perform tasks assigned., • Possess good communication skills & an ability to adapt to changing situations., • Experienced MIG welder a plus. Education and/or Experience: • High school diploma or general education degree (GED); or relative experience and/or training for job classification. Language Skills: • Ability to read and comprehend simple instructions, short correspondence, and memos., • Ability to write simple correspondence., • Ability to effectively present information in one-on-one and small group situations to other employees of the organization. Mathematical Skills: • Depending on job classification, may require basic math and/or tape measure reading., • Depending on job classification, may require the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability:Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few variables in standardized situations. Physical Demands:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: • Stand, walk, and talk, or hear., • Reach with hands and arms., • Climb or balance; and stoop, kneel, crouch, or crawl., • Use hands to finger, handle, or feel., • Regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

Job Description Tig Welder (OEM Manufacturing Environment) Location: Itasca, IL Job Type: Temp-to-Hire (Direct Hire may be considered based on candidate qualifications) Schedule: Monday – Thursday | 4:45 AM – 3:15 PM (4 x 10-hour shifts) Friday overtime as required Pay: $26.00 – $30.00/hour (based on qualifications and weld test results) About the Opportunity Our client is an industry-leading manufacturer specializing in water heating and treatment solutions and Industrial Laundry Equipment. We are currently seeking a Welder-Fitter to join our client's growing team. This position is unique in that we are not an open-market weld shop. As an OEM (Original Equipment Manufacturer), the selected individual will fabricate weldments and assemblies for our own proprietary product lines. Candidates will work on products that directly support our operations and long-term growth. We are seeking either: • A well-rounded and experienced Welder-Fitter ready to contribute immediately, or, • A motivated individual with foundational skills, a strong work ethic, and a commitment to long-term growth through an apprenticeship-style training program We recognize that every candidate will have a learning curve and are willing to invest in individuals who demonstrate dedication, reliability, and the right attitude. Essential Responsibilities • Perform TIG welding on stainless steel and mild steel components and assemblies, • Read and interpret blueprints and drawings., • Layout projects and fabrication tasks from blueprints, • Fabricate and assemble weldments according to specifications., • Ensure welds are leak-free and meet quality standards., • Utilize proper fabrication methods and best practices for fit, form, and function., • Operate fabrication equipment and hand tools safely and effectively., • Maintain attention to detail while producing high-quality work., • Assist with assembly and production activities as needed., • Maintain a clean and safe work environment. Qualifications Required Skills & Experience: • TIG welding experience with stainless and mild steel, • Basic shop math skills, • Ability to read and interpret blueprints, • Experience performing layout work from blueprints, • Ability to use measuring tools, including:, • Tape measures, • Calipers, • Experience using fabrication and shop tools, including:, • Grinders, • Sanders, • Plasma cutters, • Strong mechanical aptitude, • Detail-oriented with a quality-focused mindset, • Strong work ethic and willingness to learn Preferred Qualifications • Previous experience in manufacturing or OEM environments, • Fabrication and assembly experience, • Candidates interested in long-term growth and skill development What Our Client Offers • Four-day work week (Monday–Thursday schedule), • Competitive pay based on experience and weld test results, • Overtime opportunities, • Long-term career growth potential, • Apprenticeship and development opportunities for motivated individuals, • Opportunity to become part of a growing, stable organization We are seeking individuals who want more than just a job — we’re looking for someone interested in building a long-term career and growing alongside our organization.

Job Description Reinforced Concrete Fabrication Crew Member Ready to earn great pay fast, learn valuable trade skills, and build essential infrastructure with Thompson Pipe Group – Pressure in South Beloit, IL? Why this job? • Rapid pay progression: $17.31 to start → $18.71 at 30 days → $20.11 at 60 days → $21.51 at 90 days (contract-defined rate), • Extra retirement funding: +$2.16 per hour after 30 working days (about $4,500/year) at no cost to you, • Daily overtime: 1.5x after 8 hours in a day (not only after 40 hours/week), • Sunday/holiday premium: 2x pay, • Sign-on Bonus: $100 at 30 days, $200 at 60 days, $300 at 90 days Typical overtime is 15–17 hours/week. At the $21.51 rate, overtime plus retirement contributions can add up to about $76,000–$80,000 per year; during your first 90 days it’s about $62,000–$65,000 annualized. Overtime varies with production and isn’t guaranteed. What will you do? • Build and finish concrete pipe, • Tie rebar and prepare reinforcement, • Patch, grind, and perform detailed finishing, • Use hand and power tools safely, • Move materials as part of the production flow Work environment: outdoors/plant conditions—hot in summer, cold in winter, and not air conditioned. Lift 35+ lbs regularly. PPE required (hard hat, ear protection, steel-toe boots). We cover half the cost of your boots (up to two pairs per year) and provide rain/winter gear. When will you work? Monday–Friday, 5:00 AM–3:30 PM. With overtime, expect roughly a 50-hour week plus some Saturdays. Early start, early finish. Benefits you can count on Union Health & Welfare This is a union position. Full premiums are paid to the Union Health & Welfare Fund for eligible employees, providing access to benefits that may include medical, dental, vision, prescription, and disability coverage. Eligibility and coverage are determined by the Union Health & Welfare Fund. Company Supplemental Options Elect voluntary benefits such as accident insurance, critical illness insurance, and other supplemental coverage options. Coverage begins on the 1st of the month following 30 days of employment. What do we need from you? • Show up on time, every day, • Put safety first, • Be ready for physical work, • No experience necessary—training provided How to get hired Walk in—no appointment needed—Tuesday to Friday, 9:00 AM to 4:00 PM. 4416 Prairie Hill Rd., South Beloit, IL 61080 Bring a photo ID. Apply on-site and speak with someone the same day. Where can this role take you? Clear pathways with posted, contract-set rates: • Steel Welder or Crane Operator — $22.13, • Maintenance or Setup Welder — $22.39, • Ring Welder, Locomotive Crane or Electrician — $24.95, • Working Foreman — $25.27 Important information Offer depends on passing a physical and a drug and alcohol test. TPG Pressure, Inc. Equal Opportunity Employer – M/F/Veteran/Disability. Accommodations available on request. Sign-on bonus is subject to change and does not apply to rehires. Please ask about current sign-on bonus availability and eligibility during your interview.

Job DescriptionSets-up and operates heli, stick, mig, and tig welding equipment to weld various parts according to production specifications. ESSENTIAL DUTIES:1. Reads production orders and blueprints to determine required set-up including fixture needed, electrodes required, joining time and type of metal being welded. 2. Retrieves parts and secures parts in fixtures with clamps. 3. Welds front and back of grills, switch arms, beaters, hoods, helix blades, and gear mounts under close tolerances using various metals such as coal rolled steel, aluminum, ampco, and stainless steel. 4. Operates wire feed welding machine to weld bull nose and back plates on grills, nose cone, ring, and gear nut on shells and butt welds seams of shells. 5. Threads specified electrode wire through feed rolls in the welding head, sets the welding head at specified angle, and sets current and voltage on the wire feed machine. 6. Cleans workpiece using grinder and chisels and visually examines welds for conformance to specifications. 7. Pressure tests welds at 300 pounds per square inch. 8. Grinds and rewelds deficient welds and scraper blades. 9. Arranges welded pieces in an orderly fashion and moves finished parts to holding area. 10. Keeps production records. OTHER DUTIES:1. Performs preventive maintenance on equipment. 2. Maintains cleanliness of work area and follows safe work practice rules. 3. Performs other miscellaneous duties as required. POSITION REQUIREMENTS:Education: Six months commercial, vocational, or other specialized training beyond high school. Experience: Two years related work experience. PHYSICAL DEMANDS:Manual Dexterity: Work requires regular speed and accuracy for most of the working day. Physical Effort: Work requires a considerable variety of fairly steady active physical exertion. Working Conditions: Continuous exposure to disagreeable features. Hazards: Injury may require a doctor's care. Time lost for part of a day may be to receive medical treatment.

Job DescriptionTIG Welder: Rockton, Illinois Our customer in Rockton, Illinois is known around the world for designing, manufacturing, and servicing commercial equipment. They are seeking motivated individuals to join their team as a TIG Welder. Responsibilities of the TIG Welder:Responsibilities • Set up and operate TIG, stick, heliarc, and wire-feed welding equipment., • Read blueprints and production orders to determine welding requirements., • Secure parts in fixtures and perform precision welding on various components., • Weld carbon steel, stainless steel, aluminum, and specialty metals to specifications., • Inspect, test, and repair welds to ensure quality standards are met., • Grind, clean, and prepare materials before and after welding., • Perform pressure testing and make necessary weld corrections., • Move completed parts to designated areas and maintain production records., • Follow all safety and quality procedures. TIG Welder Requirements and Qualifications:, • High School diploma or equivalent., • 2 years related work experience., • 6 months commercial, vocational, or other specialized training beyond H.S., • Ability to read precision measuring equipment., • Good written and verbal communication skills. Pay for TIG Welder: Starting at $23.30/hour. TIG Welder Benefits:, • Paid weekly., • Direct deposit., • Health insurance., • Paid training. Type: 1st Shift, Full-time. Schedule: Monday - Friday from 6:00am-3:30pm. Apply now! Are you ready to move from the worries of today to your dreams of tomorrow? If so, give Hughes a call. We are the top-rated staffing, recruiting, and HR experts in the region. We are headquartered in Freeport, IL and have 11 locations across Illinois, Wisconsin, and Minnesota. Where we have offices, we have connections to the best local jobs! Walk in our doors and you’ll find friendly professional staff who dig deep, get results, and most importantly have fun! The reviews speak for themselves, at Hughes we quickly hook you up with companies that offer competitive pay rates, great culture & benefits, and a chance to elevate your life. We offer health insurance and 401(k) too to all our employees. To get the ball rolling, visit us online at www.hughesrecruiting.com and complete our application. We’ll be in touch soon!

Job Description Welding Inspector / QA Technician II Position Summary The QA Technician II serves as a hands-on Welding Inspector supporting production in a heavy manufacturing environment. This roleis responsible forinspecting welds, ensuring product quality, and supporting fabrication operations. Ideal for candidates with experience in welding, fabrication, machining, or industrial manufacturing looking to grow into pressure pipe applications. Key Responsibilities Perform visual inspection of welds and fabricated components Inspect fit-up, alignment, and production work prior to welding Verify work is performedin accordance withWPS and drawings Conduct in-process and final inspections Use inspection tools such as gauges, calipers, and micrometers Identifyand document weld defects and quality issues Support or perform NDT activities (MT, PT, UT) Work with production teams to resolve quality issues Complete inspection and quality documentation Support continuous improvement and shop quality initiatives Requirements Experience in welding, fabrication, machining, or heavy manufacturing Experience inspecting welds or manufactured components Ability to read drawings and understand weld symbols Familiarity with WPS, inspection processes, or shop QA Experience working in production environments Exposure to AWS, ASME, AWWA, or similar codes is a plus AWS CWI/CAWI or equivalent experience preferred PREFERRED QUALIFICATIONS 2+ years of experience in a QA, QC, or production role in pipe manufacturing, precast concrete, or a related industry. Hands-on experience in at least one discipline: concrete/civil, coatings, welding, or NDE/NDT. Level I or equivalent certification in at least one area; Level II or equivalent strongly preferred — ACI Field Test Technician; AWS CWI or CAWI; NDE/NDT MT, PT, RT, UT, or VT (ASNT SNT-TC-1A or NAS 410); NACE/AMPP Coating Inspector; or API 510, 570, or 577. Proficient in Microsoft Office, particularly Excel. Bilingual English/Spanish a plus. You should be proficient in: • Quality Inspection Experience, • Welding Setups for Production, • Blueprint Reading Machines & technologies you'll use: • MIG Welder, • TIG Welder, • Stick Welder, • Flux-Cored Arc Welder

Job DescriptionTIG Welder: South Beloit, Wisconsin. Our customer in South Beloit, Wisconsin is seeking motivated individuals to join their team. As a TIG Welder, you will perform precision welding, fabricate piping and sheet metal systems, and collaborate with the team to deliver high-quality results. Responsibilities of the TIG Welder: • Perform TIG welding on stainless steel and nickel alloy components with precision and consistency., • Fabricate process piping and sheet metal assemblies according to blueprints and specifications., • Read and interpret shop drawings, technical documents, and P&ID diagrams to ensure accurate fabrication., • Maintain ASME Section IX quality standards and meet weld test requirements., • Troubleshoot, adjust, and collaborate with engineering and fabrication teams to meet project goals., • Maintain a safe, organized, and efficient work environment., • Participate in process improvement and quality initiatives. TIG Welder Requirements and Qualifications:, • Minimum 1-year TIG welding experience., • Proven ability to pass ASME Section IX 6G weld test., • Strong understanding of shop drawings and technical documentation., • Experience with process piping or sheet metal fabrication., • Familiarity with P&ID drawings is preferred. Pay for TIG Welder: $24–$32/hour. After training, candidate will work 10-hour shifts Monday – Friday. TIG Welder Benefits:, • 401(k) with company match., • Medical, dental, and life insurance., • Flexible Spending Account (FSA)., • Paid time off (PTO)., • Opportunities to advance and grow your career in a precision-driven, high-performance environment. Type: 1st Shift, Full-time Schedule: Monday – Friday, 6:00am–3:00pm. Apply now! Are you ready to move from the worries of today to your dreams of tomorrow? If so, give Hughes a call. We are the top-rated staffing, recruiting, and HR experts in the region. We are headquartered in Freeport, IL and have 11 locations across Illinois, Wisconsin, and Minnesota. Where we have offices, we have connections to the best local jobs! Walk in our doors and you’ll find friendly professional staff who dig deep, get results, and most importantly have fun! The reviews speak for themselves, at Hughes we quickly hook you up with companies that offer competitive pay rates, great culture & benefits, and a chance to elevate your life. We offer health insurance and 401(k) too to all our employees. To get the ball rolling, visit us online at www.hughesrecruiting.com and complete our application. We’ll be in touch soon!

Job DescriptionMake, mend, and move what matters Imagine starting your morning at 5:00 AM in a team that turns steel and concrete into durable pressure pipe. At Thompson Pipe Group – Pressure in South Beloit, IL, you’ll help shape infrastructure—tying rebar, setting up welds for smooth production runs, finishing concrete, and keeping materials flowing. If you bring reliability and a safety-first mindset, we’ll teach you the rest. Your first 90 days: a clear path We believe in transparent, contract-defined pay. Here’s how you progress: • $17.31/hour on day one, • $18.71/hour at 30 days, • $20.11/hour at 60 days, • $21.51/hour at 90 days (full Laborer rate set by contract) Plus, earn daily overtime—time-and-a-half after 8 hours—and double time on Sundays and holidays. Many teammates average 15–17 OT hours weekly. At the top rate, typical OT plus retirement contributions can total about $76,000–$80,000 a year (first 90 days: ~$62,000–$65,000). Overtime varies with production and isn’t guaranteed. Benefits that start quickly • Bonuses: $100 at 30 days, $200 at 60 days, $300 at 90 days, • Retirement: company deposits $2.16 for every hour you work after 30 working days—about $4,500/year; you contribute nothing, • Health insurance: medical, dental, vision, prescription, and disability—company pays $655/month for you or $1,966/month for family; starts the 1st of the month after 30 daysSchedule and setting Monday–Friday, 5:00 AM–3:30 PM (around 50 hours/week with OT), plus some Saturdays. Industrial environment; not air conditioned. Expect lifting of 35+ lbs. PPE: hard hat, ear protection, steel-toe boots (we cover half the boot cost, up to two pairs/year) with rain and winter gear provided. Tools, tech, and talent • Welding setups for production lines, • MIG, TIG, Stick, and Flux-Cored Arc welding equipment, • Hand and power tools for grinding, patching, and finishingWhat we look for, • On-time attendance and a commitment to working safely, • Readiness for physical, hands-on work, • No experience required—training providedAdvance with us Move into higher-paid, posted roles: Steel Welder or Crane Operator $22.13; Maintenance or Setup Welder $22.39; Ring Welder, Locomotive Crane, or Electrician $24.95; Working Foreman $25.27. Walk-in and apply Tuesday to Friday, 9:00 AM–4:00 PM 4416 Prairie Hill Rd., South Beloit, IL 61080 Bring a photo ID. Apply and speak with someone the same day. Compliance *Offer depends on passing a physical and a drug and alcohol test. *TPG Pressure, Inc. Equal Opportunity Employer – M/F/Veteran/Disability. Accommodations available on request.

Job DescriptionG&H Marine Inc. – Welder / Marine Fabrication Technician G&H Marine Inc. specializes in floating docks, aluminum and permanent docks, boathouses, seawalls, rip-rap, swim platforms, marina design, and commercial waterfront structures. For over 30 years, we’ve been delivering exceptional workmanship using only top-quality materials with a commitment to customer satisfaction. Location: Decatur, IL (projects throughout Illinois & surrounding states) Position: Welder – Marine Construction Type: Full-time Schedule: Monday–Friday Team Environment: Work alongside skilled welders, craftsmen, installers, and foremen Responsibilities • Weld steel components for docks, boat lifts, and other marine structures, • Assist in fabrication and assembly of custom dock sections, frames, and parts, • Perform SMAW (7018 rod) welding with precision and attention to quality, • Load, unload, and handle materials (lumber, aluminum, steel, hardware), • Operate power tools, grinders, and job site equipment safely, • Follow blueprints or supervisor instructions to complete welding tasks, • Maintain a clean and organized work area, • Support service and repair work as needed, • Always follow safety protocols and foreman directionRequirements, • Reliable, everyday attendance is a must, • Valid driver’s license required, • Travel is a must – job sites vary across the region, • Welding experience required (aluminum and steel preferred), • Ability to lift 50+ lbs and work outdoors in all weather conditions, • Ability to work near/over/in water and follow all safety procedures, • Construction or marine fabrication experience a plus, • Welding certifications preferred (but not required), • Forklift certification, • Positive attitude and attention to detailWhy Work With Us?, • Work on a wide variety of custom fabrication and waterfront construction projects, • Use your welding skills to help build beautiful and functional marine structures, • Supportive, family-owned company with over three decades of experience, • Competitive pay based on experience, • 401k Match after 90 days (4% Match), • Health Insurance after 60 days, • Paid Time Off (1 hour PTO for every 40 hours worked), • Great team atmosphere and opportunities to growApply Today Email your resume or a brief introduction to jared@ghmarine.com or call (217)423‑6684 and ask for Jared. Learn more about us at ghmarine.com. G&H Marine Inc. is a drug-free workplace and an equal opportunity employer.

Job Description This self-starting, mechanically inclined individual will be responsible for developing a working knowledge of the machinery and equipment used in the production processes. This person must be adept at working with others, coordinating with the maintenance team members, as well as production personnel to ensure repairs are accomplished safely, and in a timely manner. Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Diagnosis of root cause of problems and makes appropriate repairs Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. Previous exposure to welding and machining to assist in the fabrication of repair parts by using machine shop instrumentation and equipment. Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt. Conserves maintenance resources by using equipment and supplies as needed to accomplish job results. Provides mechanical maintenance information by answering questions and requests. Prepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends utilizing the maintenance system module (Amper) Maintains safe and clean working environment by complying with procedures, rules, and regulations. Contributes to team effort by accomplishing related projects as needed. Can be trained in the operation of forklift and scissor lift and achieve company certification Willing to work flexible hours as customer demands dictate Bi-lingual in Spanish preferred. Welding/machining/metal fabrication skills a plus. Job Type: Full-time Benefits: 401(k) Health/Dental/Vision insurance Paid time off Work Location: In person You should be proficient in: • Mechanical Troubleshooting Skills, • Electrical Troubleshooting, • Electrical Repair, • Tape Measure Reading, • Maintenance and Repair Skills, • Industrial Electrical Systems, • Equipment Diagnostics & Troubleshooting, • Mechanical Systems & Component Repair, • Lockout/Tagout (LOTO), • Electrical Schematic Reading, • Low Voltage Cabling Installation, • Equipment Repair & Maintenance Machines & technologies you'll use: • MIG Welder, • Turning Lathe, • TIG Welder, • Packaging Machines, • Wrapping Machines, • Voltage Detector (Fluke), • Dock Stocker (Stand-Up Reach or Counterbalance Forklift) (Toyota), • Manual Grinder, • Power Tools (DeWalt, Milwaukee), • Slitter Machine, • Calipers and Micrometers, • Programmable Logic Controller (PLC) (Allen Bradley), • Conveyor Systems, • Box Folding Machine

Job Description Maintenance Technician Naperville, IL How can you make a difference at your job and can have the opportunity to grow? Join the Naperville – Spartech Team! We are currently looking for a Maintenance Technician to join our team. If you meet the qualifications and want to make a difference in a fast-paced environment with a company large enough to offer you room to grow but not so large you become "just a number", and who has a large focus on safety and success, Spartech might be the ideal company for you! The Maintenance Technician is responsible for completing maintenance assignments to build, repair and/or maintain all equipment in good operating condition as quickly and accurately as possible, while keeping associated costs to a minimum to help meet Plant goals. The Maintenance Technician is expected to be multi-skilled and able to contribute to plant maintenance activities in a variety of craft disciplines. Requirements • Completes projects with minimal guidance showing a proactive attitude to minimizing equipment down time and lost production capability., • Troubleshoots mechanical devices in operation. Dismantles and examines devices to gain access to and remove defective parts. Adjusts, repairs or replaces defective parts., • Sets up and operates shop machinery such as lathe, drill press, grinders, band saws, cutting torch, welder. etc. Uses hand tools and pneumatic tools to modify or repair parts and equipment., • Installs new or repairs/modifies hydraulic and pneumatic equipment as needed., • Improves reliability and uptime of all equipment. Takes a proactive approach to equipment issues with a preventive maintenance mentality., • Operates forklift and hydraulic working platform as needed., • Research supplies, parts and tools needed to complete work orders., • Assists in identifying and maintaining an accurate inventory of parts., • Contributes to upkeep and updating of required paperwork such as records, maintenance logs, documents, manuals, drawings, PM logs, etc., • Supports the vision, mission and guiding principles of the company., • Follows applicable Safety, Health and Environmental rules and guidelines while performing job duties., • Maintains departmental housekeeping., • Electrical experience., • Other duties as assigned. Education & Experience • High school diploma or equivalent required., • 5 years of industrial maintenance experience or technical hands-on experience. Benefits We offer competitive salary and benefit programs! Benefits include: • Medical, • 401(k) Plan, • Life and AD&D, • Vacation, • 6 Paid Holidays Spartech LLC headquartered in Maryland Heights; Missouri is a leading manufacturing organization in the Custom Sheet & Roll Stock and Packaging markets with over a dozen locations throughout the United States. We have a broad customer base with extensive product offerings and technologies. Many of our materials are used in products you might see every day - for example, if you start your morning with a single serve yogurt, the container you ate from may be made from one of Spartech's products or the refrigerator where the yogurt was stored could have Spartech products in its interior features. More unique uses of our products can be seen in military or security applications, for example in fighter jet canopies or bullet resistant windows. From routine daily-life to life-saving applications - we make a difference. Our broad scope of products and services keep our environment interesting and challenging with a culture focused on success. Spartech, LLC provides equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, or veteran status, or other legally protected classification in the state in which a person is seeking employment. Spartech will use E-Verify to ensure employment eligibility of newly hired employees where required.

Job DescriptionDescription: Robotic Welder Service Technician Robotic Welder Service Technician Page 1 of 3 January 2026 TITLE: Robotic Welder Service Technician BUSINESS UNIT: REPORTS TO: Service Manager FLSA STATUS: Non Exempt LOCATION: Schaumburg, IL REVISION DATE: 1/12/26 SUMMARY CLOOS North America is looking for a motivated and experienced Field Service Technician to help us with growing our Customer Support Team. The ideal candidate will have a working knowledge of servo controlled robotic systems including how to identify defective Servo motors, Servos and power supplies, and how to resolve issues with dual channel E-stop circuits. A successful Field Service Technician will be facing directly with customers and that interaction must be professional and a positive reflection of the company. ESSENTIAL FUNCTIONS Reasonable Accommodation Statement To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Essential Functions: • Repair of customer equipment either in-house or at customer facilities throughout North America. • Installation of robotic welding equipment at customer facilities throughout North America. • Customer Support at customer facility of new and used equipment • Basic Robot Programming support during and after robot system installations. • Address customer concerns about their equipment and report such concerns and possible resolutions to the appropriate parties • Customer training on how to correctly operate and maintain their equipment • Preventative maintenance on robotic welding equipment either in-house or at customer facilities throughout North America. • Calibration of robotic welding equipment either in-house or at customer facilities throughout North America. • In-house assembly and testing of new and used equipment. • In-house customer service and/or support via telephone, SMS and e-mail. • Robotic System assembly • Open to 70% travel Requirements:

Job Description Our company expects all team members to uphold our core values of: Safety Practice Safety First - Physical, Intellectual, and Emotional - Always. Teamwork Offer help, ask for help, and leverage the strength of our diverse and inclusive team. Respect Treat others as you would like to be treated. Accountability Take responsibility for your actions and your words. Continuous Improvement Take initiative and strive to do better. Ethical Behavior Follow our Code of Ethics and meet our high standard of professional behavior. Considerations: Chicago Glue & Machine (CGM) and our customers, convert and apply adhesives in a multitude of ways of application equipment. This position is best served by a person who likes variety, thinks creatively, and is a good communicator. The responsibilities include assessing and repairing customer's equipment in the CGM maintenance shop as well as installing and PM'ing equipment in the field (80%). The production operation at CGM includes equipment requiring maintenance/repair and assisting with facility projects as needed (20%). This department is one we are focused and committed to growing. We value our employees as our greatest asset. Our track record shows our continued investment in and supporting people for personal and professional growth both as individual contributors and managers. Full Time: Monday through Friday 7:00 am to 4:00 pm, OT on evenings and weekends as needed. Communication: • Ability to effectively communicate verbally and in writing with coworkers, • Ability to read and understand basic English, • Bi-lingual in English/Spanish is helpful but not a requirement Responsibilities • Install, repair, and maintain gluing systems and equipment at customer sites to manufacturer's specification by understanding the mechanics, hydraulics, pneumatic, and electrical components, • Document and communicate information to assist our customers and us to make educated and insightful business decisions, • Participate in and contribute to our quality management system, • Initiate purchase order for parts and machines, • Maintain technical knowledge by attending educational workshops, reviewing technical publications, and interfacing with industry experts., • Fabricate repair parts by using machine shop equipment such as drill press and welder, • Perform other duties as assigned Skills: • Knowledge of hydraulic, mechanical, pneumatic, and electrical systems, • Read/interpret schematics and work with PLC, • Time Management, • Problem Solving, • Basic computer skills, Microsoft Office products emphasis on Outlook and Excel, • Basic math including addition, subtraction, multiplication, and division with and without a calculator, • Lift up to 50 pounds, • Climb stairs and work from an elevated platform, • Bend, stoop, push, pull, grasp, reach, kneel, twist frequently during the shift, • Walk frequently within department, and ability to stand during the entire production shift, • Forklift and other material handling duties, • Detail, process, and goal oriented, • Work efficiently in a fast paced, multi-tasking environment, • Identify and resolve problems independently and collaboratively Benefits • 10 paid holidays, • Choice of HMO or PPO Medical Insurance, Dental and Vision Insurance offered, • FSA, • 401k, 3% employer match, • Short Term Disability, • Long Term Disability, • Safety Committee, • Fiesta committee and events planned by the committee for celebration, team building, and morale building, • Stuck on Sustainability Committee, • All-inGLUE-sive Committee (Diversity, Equity, and Inclusion), • Peer Mentor Program Requirements • High school or equivalent, • Applicable Trade School, • Minimum of 3 years of experience working with electrical, hydraulics, programming, and mechanical PLCs is desired and not required, • Electrical certification is preferred, • Valid driver's license and clean driving record as travel is required 20% - 40%, • Must be able to pass background check and drug screen Work is performed indoors; temperatures can range from refrigerated environments to 95 F. Frequent exposure to the smell of different molten adhesive formulas. Salary is commensurate with experience.

Robotic Welder Service Technician / Field Service Technician Location: Remote Join my client as a hands-on technical expert supporting advanced robotic welding systems across North America. You’ll keep critical automation running, solve complex challenges, and help customers get maximum performance from their equipment. Why You Should Apply • Work hands-on with sophisticated robotic welding technology, • High-impact, customer-facing technical role, • Exposure to ABB, Fanuc, Kuka, PLCs, and servo-controlled systems, • Travel throughout North America—up to 70% What You’ll Be Doing • Install, repair, calibrate, and maintain robotic welding equipment, • Troubleshoot servo systems, power supplies, and E-stop circuits, • Support robot programming and system installations, • Train customers on equipment operation and maintenance, • Assemble, test, and support new and used robotic systems About You • Electrical trade training or related associate degree preferred, • Knowledge of robotic equipment such as ABB, Fanuc, or Kuka, • Able to interpret schematics, layouts, and technical manuals, • PLC support/programming skills preferred, • Strong customer communication and troubleshooting skills How To Apply We’d love to see your resume, but we don’t need it to have a conversation. Send us an email to tony@scientificsearch.com and tell me why you’re interested. Or, feel free to email your resume. Please include Job#20159

Nidec Mobility America Corporation(NMOA) has immediate opportunity for one energetic / focused Automation Maintenance Technician (Maintenance Equipment Technician) within our St. Charles, IL location. Come Grow with Us - NEW OPENING ! 2nd Shift (1:30pm - 9:45pm) NMOA (St. Charles, IL), headquarters our family of Companies with facilities in the USA, Canada, Germany and Mexico (with our Sales Team based in Detroit Metro). A little about Nidec Mobility.. We are the North America headquarters for Nidec Mobility America (locations in Illinois, Michigan, Ohio, Canada, Mexico) and a leading Automotive Electronics Designer and manufacturer of sophisticated electronic sensing and control technology / components. We control the most discrete functions within an automobile, including: power system components, complex user interfaces, seat and power window switches, and instrument panel controls, electronic sensing/radar). Objective Under direction of the Equipment Maintenance Technician Supervisor, performs various skilled and complex tasks in the repair and maintenance of production machinery and equipment which may include, but is not limited to, high speed automated assembly line equipment, contact welding and press machines, robotic coil winders, axial and radial inserters, wave soldering machines, and SMT equipment. Responsible to continuously improve the equipment and machinery while demonstrating excellence in maintenance service. Essential Responsibilities • Monitors, analyzes, diagnoses and then fine tunes or repairs machine problems in conjunction with manufacturing engineering and production supervisors., • Reads and interprets blueprints, drawings, wiring schematic diagrams, and complex equipment manuals., • Utilizes advanced mechanical and electrical troubleshooting skills in problem assessment. Tests and evaluates equipment performance., • Utilizes effective PLC diagnostics and programming skills., • Assists with the development and implementation of preventative maintenance programs on all equipment. Works closely with production supervisors to schedule PM activities., • Train production operators on how to perform and assist with simple PM duties., • Assists with developing and maintaining the equipment spare parts inventory., • May complete purchase requisitions for the purchase of spare parts., • Investigates causes of machine problems, raw materials, tooling and equipment. Recommends improvements to processes and equipment to improve efficiency., • Properly documents new procedures and machine changes or additions. Accurately completes all paperwork associated with PM and machine downtime., • May create special fixtures or modify existing equipment with the use of surface grinders, milling machines, arc welder, and lathes., • Utilizes various diagnostic equipment and measuring devices such as voltmeters, calipers, micrometers, and oscilloscopes., • Supports and participates in the Company’s management and quality system including continuous improvement efforts. Experience: 2+ years' equipment maintenance technician in an automated assembly production environment Education: High School or Equivalent Knowledge/Skills/Abilities • Ability to operate / diagnose a variety of automated assembly production equipment within an electronics assembly (PLC's, sensing, robots pick/place)., • Extensive knowledge of electro-mechanical equipment operating under PLC’s, robotics, machining, pneumatics, hydraulics, and sensor controls., • Effective interpersonal and communication skills with strong time and project management skills., • Basic PC skills (Microsoft Office, Word and Excel). Familiarity with computerized PM program preferred., • Preventative maintenance experience with exposure to computer software and systems., • Ongoing ability to compete high level mechanical diagnostic, calibration, set-up and repair duties as required., • Ability to read, write, and perform basic arithmetic functions. For immediate review of your skills, please apply via LinkedIn -or- email your updated resume directly to Julissa.Quinones@Nidec.com NOTE: This position Is Not open to external sourcing (Recruiting agencies) All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Position Purpose Provide manual labor to build hollow metal door and frame products used in commercial construction applications. This position reports directly to the Production Manager. Essential Functions Read shop drawing and work orders to assemble and construct the product into specified shapes, sizes and dimensions.Assemble and weld door and light frames. Modify frames as specified.Assemble, prep and weld doors. Modify as specified.Receiving, storing and stocking of products for distribution to customers.Picking, packing, and assembling orders for customers.Operate forklifts, pallet jacks, and other warehouse equipment in the receiving, picking and staging process, preassembly, and post assembly.Qualifications Preferred Knowledge Minimum education level: high school diplomaMinimum 3 years' experience in light gauge weldingWorking knowledge of commercial construction and building productsLift a minimum of 50lbs on a daily basis.Knowledge of hollow metal doors and frames, wood doors or builder's hardware preferred Interpersonal A positive attitude and the ability to maintain professional, long-term co-worker, customer, vendor, and business relationships Service-oriented and a dedication to winning customers 'for life' Strong professional verbal and written communications skills An innovative approach to resolving problems and delivering results Ability to thrive in a fast-paced, ever-changing environment

Job DescriptionOverview Join our dynamic team as a Welder in Edwardsville, IL, where you will play a crucial role in our manufacturing process. With a competitive pay rate of $28 per hour, this position offers a fantastic opportunity for skilled welders looking to advance their careers in a supportive and innovative environment. If you have a passion for precision and craftsmanship, we want to hear from you! Responsibilities • Perform welding tasks using various techniques such as MIG, TIG, and Stick welding., • Read and interpret blueprints and technical drawings to determine project specifications., • Inspect and test welded surfaces to ensure quality and compliance with safety standards., • Maintain welding equipment and tools to ensure optimal performance., • Collaborate with team members to meet production deadlines and project goals., • Adhere to all safety protocols and procedures to maintain a safe working environment. Qualifications, • High school diploma or equivalent; relevant vocational training is a plus., • Proven experience as a welder, with a strong portfolio of completed projects., • Familiarity with welding techniques and safety standards., • Ability to read and interpret technical documents and blueprints., • Strong attention to detail and a commitment to producing high-quality work., • Excellent communication skills and the ability to work well in a team environment.

Job Description Ehrhardt Tool & Machine is a dynamic contract manufacturing company dedicated to delivering high-quality engineering and fabrication services. With a focus on precision, efficiency, and customer satisfaction, we serve a diverse range of industries including nuclear, aerospace, power generation, and more. SHIFT: First shift Monday - Friday 7:00am-3:30pm (may be flexible) JOB DESCRIPTION: This position will support manufacturing in a regulated environment (ASME, nuclear, aerospace), producing code-compliant welds on critical and pressure-containing components. ESSENTIAL FUNCTIONS AND BASIC DUTIES: · Perform GMAW (MIG) welding on carbon steel, stainless, and alloys · Interpret blueprints, weld symbols, WPS, PQRs, and travelers and troubleshoot welding parameters · Execute multi-pass, structural, and pressure boundary welds · Ensure compliance with ASME Section IX and customer specs · Perform inspections and correct defects · Maintain traceability and documentation · Support root cause analysis and corrective actions · Follow safety and PPE requirements Quality & Compliance Expectations · Experience with ASME Section IX welding, including pressure vessels · Ability to follow WPS/PQR requirements · Understanding of pressure boundary weld quality · Exposure to inspection methods (VT, UT, RT, PT, MT) · High first-pass yield and minimal rework · Maintain precision, traceability, and consistency QUALIFICATIONS · 5–7+ years GMAW welding experience · ASME Section IX welding experience · Ability to read blueprints and WPS/PQR documentation · Experience with multi-pass and pressure welds · Strong metallurgy and distortion control knowledge · Experience with code welding and pressure weldments · Experience in regulated environments · FCAW / GTAW experience · Experience with thick materials or pressure vessels · Exposure to audits and compliance manufacturing OTHER REQUIREMENTS Mobility in a shop floor environment Exposure to heat, fumes, noise. Handling heavy materials BENEFITS AND COMPENSATION: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance, • Referral program, • Retirement plan, • Tuition reimbursement, • Vision insurance

Welder I In this job you will be responsible for setting up and operating welding equipment together with atmospheric control equipment to perform difficult welding operations on a wide range of metals and alloys for complicated subassemblies and assemblies involving coinciding requirements for high strength, pressure and aesthetics. As a Welder I you will: • Assemble, align, square up and tack weld a variety of complicated subassemblies and assemblies using B/Ms, steel tape, straight edge, squarer, clamps, jacks fixtures, templates and similar equipment, • Fit part using torch or carbon arc or hand grinding equipment to facilitate alignment and assembly, • Set up and regulate pressure for oxyacetylene torch, • Select electrode size and type, tips and welding rod or wire as required, • Regulate gas for proper atmospheric control, current and voltage for proper penetration and fusing of metals, • Check and straighten gasket surfaces and grind excess weld from finished work, • Lay out and secure work which may involve heavy parts and assemblies Regulate current and voltage for proper penetration and fusion of similar and dissimilar metals, • Perform Mig/Tig Welding as required, • Perform preventive maintenance procedures as needed, • Provide personal tools as required, • Maintain safe and clean working environment by complying with procedures, rules, and regulations, • Conserve resources by using equipment and supplies as needed to accomplish job results, • Contribute to team effort by training others in performance of welding tasks as needed, • Inspect all work and insure it meets requirements prior to passing it on to the next operation, • Document actions by completing production and quality forms, • Communicate effectively with others at various levels of the organization. We are looking for someone who: • Holds a High School diploma, GED or equivalent work experience, • Has at least one year of formal welding training or the equivalent level of experience (preferred), • Has 0-1 years of working experience in a manufacturing environment (preferred), • Must be able to safety use small hand and power tools, measuring tools, air tools and welding equipment, • Must be able to read and interpret Drawings and Bills of Material, • Must have basic computer skills, • Must be able to perform basic Mig and Tig welding The physical demands of the job are: • Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles, • Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%), • Lifting Demands:, • Lift up to 75 pounds on an occasional basis floor to waist with assistance, • Lift up to 40 pounds on a frequent basis floor to waist, • Carry up to 40 pounds on an occasional basis up to 25 feet, • Push/Pull up to 40 pounds on a frequent basis, • Push/Pull more than 40 pounds on an occasional basis with assistance, • Postural Demands:, • Standing – continuous, • Walking – continuous, • Bending/stooping – frequent, • Squatting/kneeling – frequent, • Lifting – frequent, • Miscellaneous Demands:, • Griping, manipulation, fingering –continuous, • Variable hand/power tool use – frequent, • Two-person tasks using assistive devices for lifting, pulling and pushing including engine stands hand trucks, pallet jacks, and hoists, • Must remain medical cleared to wear PAPR or SAR welding respirator helmet What we offer you: Pay Range is typically between $26 - $28 per hour plus shift differential. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: • Medical, Dental and Vision Insurance, • Short and Long-Term Disability, • Life Insurance, • Health club membership program and reimbursement, • Employee Assistance Program, • Tuition Reimbursement, • 401 (k), • Annual Profit Sharing, • Vacation, • Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch?v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Job Description The Maintenance Technician position is located in Dixon, IL and will be responsible for troubleshooting, repairing, and maintaining pneumatic, hydraulic, mechanical, and electrical systems across plant equipment and facilities. The Maintenance Technician will also perform preventive maintenance, support equipment installations, operate industrial vehicles, and ensure building and grounds upkeep to minimize production downtime and maximize reliability. This is a 2nd shift position, 2:00 PM – 12:00 AM, Monday–Friday. Role Responsibilities: · Performs troubleshooting and repair of pneumatic, hydraulic, mechanical and electrical systems of plant equipment; determines root cause of a problem, recommends effective solution to solve the problem and implements the solution within in the limits set by the supervisor · Perform equipment preventive maintenance tasks (PM’s). · Perform building maintenance tasks - these could include painting, carpentry work, welding, plumbing, lighting, and electrical repairs. · Operate and maintain general machine shop tools and equipment which includes band saws, belt sander, welder, lathes, drill press, etc. · Fabricate simple tooling and fixtures from designs or sketches. · Operate Powered Industrial Vehicles (PIV) i.e. fork truck, lifts, floor sweeper etc. and attachments · Assist in new equipment installations or relocation of current equipment; this could involve moving, assembling, rigging, installing air piping, running conduit, leveling and aligning equipment from blueprints, schematics and specs. · Repair machines and equipment according to maintenance schedule with minimal interruption to production · Maintain buildings and grounds as needed; Light janitorial duties required · Locate and help maintain maintenance inventory · Determine root cause and provide positive feedback for corrective action plans to improve equipment reliability · Comply with all DOT, HAZMAT and environmental policies and procedures · Other duties as assigned Minimum Qualifications: · Electrical and/or mechanical maintenance experience in a manufacturing facility · Experience with control wiring, pneumatics, hydraulics, welding, machining and HVAC · Use a computer to enter data and obtain data · Ability to read and follow specifications and procedures · Ability to comprehend mechanical & electrical blueprints Preferred Qualifications: · PLC/CNC experience · Understand pumps and valves and their application; refrigeration, air conditioning, heating and ventilation equipment; P.L.C. concepts · Exhibit mechanical aptitude and knowledge of industrial electric symbols and line diagrams, control logic-line diagrams, AC/DC motors, motor starters and motor controllers · Work with and around chemicals and other materials, having exposures within acceptable limits, without adverse reaction · Multi-craft certification · Work in a physically demanding and potentially dirty environment · Communicate & interact effectively with all plant employees · Perform a variety of tasks throughout the day in a fast-paced work environment Hourly Pay Rate: $28.90 per hour plus a shift differential. This position is overtime eligible as per state and federal regulations. Actual salaries may vary based on several factors, including but not limited to applicable work experience, training, education, and performance. This position is eligible for an annual incentive plan based on performance and company growth. Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid paternal leave) and more. Immigration Sponsorship Not Available: · Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.) · Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. · International relocation or remote work arrangements outside of the United States will not be considered. Equal Opportunity Employer, including Disability and Veterans \nCompany Description Donaldson is committed to solving the world’s most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Donaldson is committed to solving the world’s most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world.

Job Description Kress Corporation is the industry leader in specialty transport carrier manufacturing, with equipment operating worldwide in demanding sectors like metals and material handling. Every Kress carrier is designed with heavy-duty construction, high load capacity, and maneuverability to deliver exceptional durability and efficiency. Our commitment to quality and innovation drives us to develop machines that meet specific application needs and provide enhanced lifecycle value. Join us and be part of a dynamic, talented team dedicated to building world-class machinery that shapes industries around the globe! MANUFACTURING WELDER – 2ND SHIFT Kress is looking for a full time Manufacturing Welder – 2nd shift to join our team in the development of specialized industrial equipment for steel, construction, and mining industries. The Manufacturing Welder will independently assemble, fit, and weld together metal components to specification using electric arc-welding equipment. Responsibilities – • Manually support and guide weld gun along weld lines, • Flat, horizontal, overhead, and vertical weld positions, • Manually groove or scarf surface with oxy-fuel cutting torch, • Maintain quality and Kress Corporation safety standards Qualifications – • High school diploma or equivalent required, • Multi pass welding experience, • Flux core experience a plus, • Candidate must successfully complete a Kress administered welding test Kress Benefits – • Group Health Insurance including Prescriptions, • Dental Insurance, • Life Insurance, • Short-term Disability, • 401(k) with Company Match, • Paid Vacation, • Paid Holidays Kress Corporation is an affirmative action equal opportunity employer offering a good work environment, competitive compensation, and an excellent benefit package that includes medical, dental, and prescription at no premium in addition to other competitive benefits. 3:30pm - 12:00am - 15% pay differential for 2nd Shift

Job Description Job Overview:ASME Section VIII Division 1 Code Compliant Welder Reports to:Director of Operations Responsibilities: • Welding to conform to customer requirements, including customer specifications, applicable code, and other accepted industry standards, • Efficient at Flux-Core welding with an emphasis on back-gouging, • Works in a safe, efficient manner following all safety regulations, • Keep accurate labor records, • Clean work upon completion of each section for inspection approval, • Maintaining company tools in good working order, • Communicates and coordinates daily work with Plant Foreman and Assigned Fitter, • Communicates directly with Internal Quality Control Manager and is responsive to customer site inspectors and Authorized Inspector’s inquiries and questions, • Limited supervision, managing schedule to complete tasks timely and without defects, • Complete of all required project paperwork and documentation in a timely manner Qualifications: • Demonstrate welding capabilities through Mason’s weld test, • Ability to be certified and maintain required production welds, • 3+ years of experience in vessel fabrication a plus, • Knowledge of ASME Boiler & Pressure Vessel Code, Section VIII, Division 1 a plus, • Ability to accurately read and interpret the blueprint drawings, • Ability to work together with a team, • Demonstrated dependability and punctuality Shift: Hiring Monday – Friday for 6am-2:30pm Benefits:Full time employee benefits include Health Insurance, Dental Insurance, Vision Insurance, Life Insurance, Paid Time Off, 401(k), 401(k) matching, and Employee Assistance Program Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance Work Location: In person You should be proficient in: • Driver's License, • Troubleshooting Skills, • Tape Measure Reading, • Forklift Licensed, • Crane Operation, • High School / GED, • Excellent Communication Skills, • Blueprint Reading Machines & technologies you'll use: • Manual Grinder, • GTAW Welder, • SMAW Welder, • Flux-Cored Arc Welder

Job DescriptionRate of Pay: • $19.00 to $20.00 per hour (paid weekly).Overtime Rate:, • $28.50 to $30.00 per hour. 1st Shift Schedule: • Monday thru Friday; 7:00am to 3:30pm., • Overtime always available; paid breaks. JOB SUMMARY: If you have aspirations of becoming a fabricator, welder, machinist, plumber, or electrician this is a great place to start or advance your career. The beginning months typically consist of cutting and assembling aluminum or steel, paint preparation, material handling, or assisting in electrical wiring. As you gain some experience to grow into a more advanced role you will be trained and partnered up with personnel in the desired department. • Saw work - cutting steel tubes, angles, channels, flat bars per blueprint cut lists., • Drilling, milling, tapping, and mechanical assembly of components., • Assisting with the dis-assembly of machinery components., • Prepping for the painting of machine components., • Assisting welders on fabrication projects., • Assisting in the wiring of ovens, fans, and related electrical components., • Some material handling and general cleaning duties. BENEFITS: • Training and teaching provided to learn a new trade., • Heavy promoting from within; multiple career progression paths., • Annual performance review and rate increase., • Earned vacation time and paid holidays., • Health coverage available., • Purchase assistance for required personal equipment., • Teammate appreciation events., • Referral pay for referring a friend or colleague., • Teammate assistance programs., • Good work-life balance including overtime choices., • Profit sharing is available upon reaching qualified service time., • Reimbursement for qualified technical training., • Easily accessible and modern facility., • Clean environment with well-maintained equipment., • Stability of an industry-leading company in business for 40 years., • Equal opportunity employer; trade school graduates and veterans encouraged. DESIRED SKILLS: • Must be able to read a tape measure to 1/32"., • Experience with Band Saws is needed., • Experience with a sit-down Forklift and overhead Crane., • Experience with Welders, Shears, Drill Presses, and Grinders is a plus., • Assembly and wiring of components. CLOSING: Thank you for your interest in joining our team. If you would like to apply or find out more about this position and our company, please contact us at jobs@maacmachinery.com or call 630-665-1700.