Trabajos welding en Miami, FloridaCrear alertas

Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. Responsibilities • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost, and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Qualifications • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Must be able to pass thorough background check Benefits The Company offers the following benefits for this position, subject to applicable eligibility requirements and annual updates: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Group Life Insurance, • Disability Insurance, • 401k Retirement Plan with match, • Referral Bonus (“Cash From Crash”) This position is paid on a commission/ flag rate structure. Flag pay is guaranteed to meet local minimum wage requirements for all hours worked each week. The compensation range listed is the average flag pay range for a typical full-time employee in this position. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Submit a Referral Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $171,540.00/Yr. ID 2026-19796 Category Body Technician Position Type Regular Full-Time Location : Postal Code 33157 Location : Address 9720 SW 170th St Remote No Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $171,540.00/Yr. Prioritization Tier 1 – Priority

Requisition Number: 28800 When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 04/24/2026. Posting Are you looking for an exciting career with a nationally known company and industry leader? AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and mechanically inclined person to join us as a Maintenance Technician for our ACE business. At AmeriGas, our employees are the keys to our success and we are proud to offer a comprehensive benefits package in addition to excellent starting pay: • Exceptional medical, dental and prescription benefits • 401(K) with company match • Generous bonus potential • Paid time off (including holidays) • Uniforms • Paid Training • Annual performance reviews and salary increases • Propane discounts • Career advancement • Tuition reimbursement Job Summary: The ACE Maintenance Technician is responsible for inspecting, maintaining and repairing devices, machines and equipment as well as preventive maintenance of all ACE equipment. This position is responsible to ensure the building structures, fixtures and other company related services are operating smoothly and efficiently. Techs are also responsible for proper documentation of all work performed and to be involved as required in the day-to-day production. Tech may train employees on the handling of equipment. Travel may be required as needed, depending on the location. All AmeriGas employees are required to model a commitment to safety through his/her own day-to-day behavior and follow company safety procedures and policies. Experience Preferred: • Industrial preventive maintenance practices • Industrial repair/general maintenance experience • Industrial 3 phase experience • Electric, pneumatic, hydraulic, and mechanical troubleshooting skills • PLC troubleshooting and problem solving • Basic welding experience • Experience with Microsoft Office programs like Word & Excel • Basic Carpentry experience Experience Required: • 1 year of industrial maintenance experience • Plumbing, electrical, pneumatic, hydraulic and mechanical experience • Must possess workable computer skills such as typing, and working with web based programs • Ability to work with a team, but also be self-motivated to complete tasks independently AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $24.00 to $25.00, depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Job Type Full-time Description Mammoth Holdings is a team of exceptional people intent on inspiring others to shine! A Maintenance Technician at MOJO must understand all phases of Industrial Maintenance. Hydraulics, pneumatics, low and high voltage electricity, PLCs, industrial motor controls, light industrial maintenance, and plumbing. Welding abilities are a plus. You will enjoy varied and continuously challenging projects with the ability to troubleshoot, solve dynamic issues, and remain hands-on. Our maintenance team takes pride in their work and are involved in regular service intervals, new equipment installs, and large-scale upgrades. Our growth and commitment to quality will keep you busy! • Great Compensation - $27-30/hour, • Complete benefit package available at Full Time after waiting period., • Medical, Dental, and Vision Insurance, • 401k with 4% company match, • PTO - Paid time off plan - Up to 1 week in the first year!, • Up to 8 weeks of Paid Maternity Leave!, • Access to Company Work Truck, • Friendly, • Co-Operative, • Attentive, • Mechanical Aptitude, • Optimistic, • Persuasive, • Versatile, • Likes Systems, • Big-Picture Thinker, • Quick on Your Feet, • Clean-Cut Appearance, • Equipment Maintenance — Performing routine maintenance on equipment and determining when and what kind of maintenance is needed., • Repairing — Repairing machines or systems using the needed tools., • Operation Monitoring — Watching gauges, dials, or other indicators to make sure a machine is working properly., • Troubleshooting — Determining causes of operating errors and deciding what to do about it., • Operation and Control — Controlling operations of equipment or systems. Quality Control Analysis — Conducting tests and inspections of products, services, or processes to evaluate quality or performance., • Critical Thinking — Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems., • Equipment Selection — Determining the kind of tools and equipment needed to do a job., • Active Listening — Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times., • Judgment and Decision Making — Considering the relative costs and benefits of potential actions to choose the most appropriate one., • Monitoring — Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action., • Coordination — Adjusting actions in relation to others' actions., • Speaking — Talking to others to convey information effectively. #indcorp Salary Description $27 - $30 / hour

Note: This is an educational program, not a job. Successful completion of the program does not guarantee employment but will equip you with valuable skills for the trades and industry job market. Are you ready to build a hands-on career path in the trades and industry sector? Dreambound offers practical training programs that will equip you with the skills needed for various high-demand roles in skilled trades and technical industries. What programs are available? We offer specialized trade and industry training programs depending on your location, including: • Electrical Engineering, • HVAC, • Gunsmith, • Automotive Service Technician, • Cosmetology, • Tower Technician, • Welding, • Construction Manager, • Aviation Maintenance Technician, • Esthetician You'll receive hands-on training and comprehensive instruction to prepare you for certification (if relevant) and the trades and industry job market. Highlights : • Complete in as short as just a few weeks, • Flexible online and in-person options available This is an educational opportunity that requires a financial investment. Cost varies per partner school, but payment plans and / or financial aid may be available to those who qualify. Take the first step towards your new career path today!

• Sign-On Bonus for New Hires: up to $7,000, • Pay: up to $25.00-$34.38 per hour, based on experience, • 2nd Shift available, • $600 Annual Tool Allowance, • Annual Boot Allowance, • Outstanding benefits: ___, • Excellent full-time career with a stable and growing company, • Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES • Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet., • Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies)., • Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment., • Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment., • Address all Driver Vehicle Inspection Report write ups timely, and efficiently., • Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems., • Follow procedures including documenting all work performed on work orders., • Learn and develop efficiency in Sysco computer programs, • Proficient in electrical meter testing, • Knowledge of controls and electric (DC (distribution center) low voltage, • Electric motor knowledge (DC), • Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education • Medium / Heavy Duty truck technical training, • High school diploma or GED required Experience • 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair, • Current and valid driver's license. Certifications, Licenses, and Registrations • Annual Inspector Certification, Knowledge, Skills, and Abilities, • Brake Inspector Certification, Knowledge, Skills and Abilities, • ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required), • 609 HVAC Certification Professional Skills • Working knowledge of computer-based diagnostic software for OEM's and component manufacturers, • Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics, • Expert knowledge and skill of all vehicle systems and components, • Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment, • Moderate knowledge and skill in Preventive Maintenance Inspections and repair, • Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG), • Basic computer skills and knowledge, • Moderate knowledge of all DOT (FMCSA) regulations, • Basic knowledge of OSHA safety regulations, • Basic knowledge of environmental regulations, • The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus., • Ability to operate various pieces of equipment, • Ability to stand, sit, walk, bend, reach, • Ability to push/pull, • Ability to lift /carry, • Ability to grasp tools, • Ability to perform Repetitive motion: wrenches and hand tools Physical Demands * While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. * The employee is frequently required to sit and reach with hands and arms. * The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. • The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment • While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces., • The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call., • The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.)., • The associate is occasionally exposed to high, precarious places and confined spaces., • The associate is occasionally exposed to fumes or airborne particles., • The noise level in the work environment is usually moderate., • Frequently works outdoors.

• Sign-On Bonus for New Hires: up to $7,000, • Pay: up to $25.00-$34.38 per hour, based on experience, • 2nd Shift available, • $600 Annual Tool Allowance, • Annual Boot Allowance, • Excellent full-time career with a stable and growing company To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES • Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet., • Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies)., • Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment., • Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment., • Address all Driver Vehicle Inspection Report write ups timely, and efficiently., • Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems., • Follow procedures including documenting all work performed on work orders., • Learn and develop efficiency in Sysco computer programs, • Proficient in electrical meter testing, • Knowledge of controls and electric (DC (distribution center) low voltage, • Electric motor knowledge (DC), • Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education • Medium / Heavy Duty truck technical training, • High school diploma or GED required Experience • 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair, • Current and valid driver's license. Certifications, Licenses, and Registrations • Annual Inspector Certification, Knowledge, Skills, and Abilities, • Brake Inspector Certification, Knowledge, Skills and Abilities, • ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required), • 609 HVAC Certification Professional Skills • Working knowledge of computer-based diagnostic software for OEM's and component manufacturers, • Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics, • Expert knowledge and skill of all vehicle systems and components, • Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment, • Moderate knowledge and skill in Preventive Maintenance Inspections and repair, • Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG), • Basic computer skills and knowledge, • Moderate knowledge of all DOT (FMCSA) regulations, • Basic knowledge of OSHA safety regulations, • Basic knowledge of environmental regulations, • The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus., • Ability to operate various pieces of equipment, • Ability to stand, sit, walk, bend, reach, • Ability to push/pull, • Ability to lift /carry, • Ability to grasp tools, • Ability to perform Repetitive motion: wrenches and hand tools Physical Demands * While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. * The employee is frequently required to sit and reach with hands and arms. * The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. • The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment • While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces., • The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call., • The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.)., • The associate is occasionally exposed to high, precarious places and confined spaces., • The associate is occasionally exposed to fumes or airborne particles., • The noise level in the work environment is usually moderate., • Frequently works outdoors.

Be part of an amazing story Macy's is more than just a store. We're a story. One that's captured the hearts and minds of America for more than 160 years. A story about innovations and traditions...about inspiring stores and irresistible products...about the excitement of the Macy's 4th of July Fireworks, and the wonder of the Thanksgiving Day Parade. We've been part of memorable moments and milestones for countless customers and colleagues. Those stories are part of what makes this such a special place to work. Job Overview Maintenance Mechanics performs preventive and corrective maintenance on material handling equipment, including daily systems inspections of mechanical and electrical components to include but not limited to material handling equipment, powered equipment and physical building structures. Full-time colleagues are typically scheduled to work 30 or more hours per week, while part-time colleagues are typically scheduled 12-24 hours per week. Hours are dependent on business needs and colleague availability. Information regarding hours per week needed for benefit eligibility purposes can be found ___ What We Can Offer You Join a team where work is as rewarding as it is fun! We offer a dynamic, inclusive environment with competitive pay and benefits. Enjoy comprehensive health and wellness coverage and a 401(k) match to invest in your future. Prioritize your well-being with paid time off and eight paid holidays. Grow your career with continuous learning and leadership development. Plus, build community by joining one of our Colleague Resource Groups and make a difference through our volunteer opportunities. Some additional benefits we offer include: • Merchandise discounts, • Performance-based incentives, • Annual merit review What You Will Do • Observes and listens to operating machines or equipment to diagnose machine malfunction and determine need for adjustment or repair, • Trouble shoot and repair material handling equipment including sorters and conveyors. Identify problems requiring outside vendors and inform the Manager or Supervisor, • Performs preventative maintenance on material handling equipment, including daily systems inspections of mechanical, hydraulic and electrical components. Reports any problems to the Manager or Supervisor, • Utilize the computerized maintenance management system. Monitors, reports, and documents the usage and replacement of equipment and parts, • Dismantles machine or equipment to examine parts for defect or to remove defective part, • Replaces defective part with new part or repairs or reproduces parts, • Assembles and test operates machine to verify correction of malfunction. Maintains and lubricates machine tools and equipment, • Performs preventative maintenance on facility; carpentry, plumbing, and electrical duties, • Knowledge of operation and safe storage practices of ARC and MIG welding equipment to include OXY/ACETYLENE, and PLASMA welding and cutting, • Maintain a safe working environment at all times. Report possible safety concerns to the Manager or Supervisor, • Assembles and test operates machine to verify correction of malfunction. Maintains and lubricates machine tools and equipment, • Disassembles, inspects and performs routine repairs and rebuilds of defective parts on all equipment associated with the automated warehouse, • May be required to install or recharge batteries for any battery-powered material handling equipment, • Adheres to all maintenance safe work practices and maintains a safe working environment at all times, • Removes dust, dirt, grease, and waste material from machines, and may paint machines or equipment to prevent corrosion, • Performs basic electrical tasks associated with but not limited to replacing motors, fuses, and switches, • Candidates with a High School Diploma or equivalent are encouraged to apply, • 1-2 years direct experience, • Commercial or industrial maintenance related experience and/or training; or equivalent combination of education and experience, • Ability to read and interpret instructional documents such as safety rules, operating and maintenance instructions, and procedural manuals, • Resourceful self-starter, works well independently as well as part of a team, • Must be proficient in the use of computers and handheld technology, • Position requires prolonged periods of standing/walking around store or department, • May involve reaching, crouching, kneeling, stooping, climbing ladders, depth perception and color vision, • Frequent use of computers and other technology necessary to perform job duties, including handheld electronic equipment Random drug testing for all colleagues will be conducted on a monthly or semi-monthly basis, depending upon factors including but not limited to the size of the facility and the number of colleagues on roll. Colleagues will be randomly selected for testing by a third party. Testing must be completed on the same workday the colleague is informed of selection for testing, absent extenuating circumstances. In all circumstances, testing must be completed within 24 hours of notification. About Us This is a great time to join Macy's! Whether you're helping a customer find the perfect gift, streamlining operations in one of our distribution centers, enhancing our online shopping experience, buying in-style and on-trend merchandise to outfit our customers, or designing a balloon for the Thanksgiving Day Parade, we offer unique opportunities to be part of some of the most memorable moments in people's lives. Join us and help write the next chapter in our story - Apply Today! This job description is not all-inclusive and may not apply to colleagues covered by a collective bargaining agreement. Macy's Inc. reserves the right to amend this job description at any time. Macy's Inc. is an Equal Opportunity Employer, committed to an inclusive work environment. SUPPLY00

Classification: Non-Exempt We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: • Medical, Dental, Vision, FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Direct Deposit, • Career Advancement, • Learning & Development Opportunities Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers' manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230-volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit ___. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job DescriptionBenefits/Perks • Flexible Scheduling, • Competitive Compensation, • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, soldering, brazing, or welding equipment, • Install pipe assemblies, fittings, valves, appliances such as dishwashers or water heaters, or fixtures such as sinks and toilets, using hand or power tools, • Plan the layout of plumbing, using drawings, • Perform maintenance of water supply systems, • Install and maintain gas and liquid heating systems, • Professionally interact with customers and clearly communicate work orders and statuses Qualifications, • Valid Plumbing License, • Minimum 1 year of professional experience, • Strong knowledge of hydraulic systems, • Ability to handle plumbing tools and equipment

Job Description We are seeking a skilled Fabricator/Welder to join our team. The ideal candidate will be responsible for fabricating and welding metal components according to technical drawings and specifications. Duties: • Build and fabricate stainless steel and aluminum metal structures using various tools and equipment, • Read and interpret blueprints to determine project specifications, • Conduct quality checks using calipers and other measuring tools-, • Operate forklifts to move materials within the workshop, • Follow strict safety regulations, wearing heat resistant gloves, protective mask, safety shoes. Experience: • Proven experience in welding and fabrication, • Mechanical knowledge for equipment setup and maintenance, • Ability to read and interpret technical blueprints (minimal), • Familiarity with calipers for precise measurements, • TIG welding using Miller Synchro Wave - model 350LX, 250, 250DX, • Welding stainless steel and aluminum (some thin stainless) Hours of Operation: Monday to Friday, 7:30am to 4:00pm. If you possess these skills and are looking to join a dynamic team, we encourage you to apply. Company DescriptionBrain Power Inc founded in 1971, also known as BPI, is recognized as the world’s largest manufacturer of optical tints, chemicals, and instruments. The company’s core expertise lies in developing and supplying advanced tinting solutions for plastic lenses, including sunglasses, therapeutic lenses, and specialty coatings used in medical and industrial applications.Brain Power Inc founded in 1971, also known as BPI, is recognized as the world’s largest manufacturer of optical tints, chemicals, and instruments. The company’s core expertise lies in developing and supplying advanced tinting solutions for plastic lenses, including sunglasses, therapeutic lenses, and specialty coatings used in medical and industrial applications.

AWS Certified Welding Inspectors in. AWS Certified Welding Inspector.

Job Description Division 5 - Misc Metal fabrication / installation company seeking a welder/fabricator to join our team! Qualifications: • Previous experience of working with metals, such as steel, aluminium or SS, • Product experience in building metal structures, decorative shutters, fencing, railing, balconies, trellises and ornamental shapes, • Experience of processes such as welding, drilling, tapping, cutting, grinding, punching, bending, notching and assembly, among others, • Knowledge of production tools and equipment, • Adhere to all safety policies and proceduresCompany DescriptionHighly energetic team offering a professional and friendly work environment.Highly energetic team offering a professional and friendly work environment.

Structure Maint Tech(Field) Miami Field Station 4196BR Job Description Performs mechanical work associated with the repair and maintenance of water control structures, as well as field station buildings and facilities. Mechanical ability to perform overhauls on water control gates, gearboxes, and small pumps. Performs welding including brazing torch work, cutting, and fitting, and arc welding layout and design. The ability to assist with repairs and installations of electrical equipment is a plus. Work experience performing hydraulic maintenance, repair, or installations preferred. Utilizes hand tools, power tools, and hydraulic and pneumatic equipment. Must be able to read and follow job specifications, blueprints, and diagrams. This position is required to participate in the Pumping Operations Program as either a pump station assistant (PSA) or pump station operator (PSO). Program participants will be required to successfully master and demonstrate competency in pump station operations and maintenance (diesel engine operations). The position will be subject to random drug screenings. All other duties as assigned. The Miami Field Station work hours are Monday - Thursday, 6:00 AM - 4:30 PM. Offices are closed on Friday. Employment Guidelines High School Diploma or GED and 2+ years’ experience in structure and facility maintenance or mechanical repair. An equivalent combination of relevant education and experience may be substituted as appropriate . The hiring range for this position is $(49,171.20) to $(57,241.60) based on education and years of relevant work experience. Licenses Valid State of Florida Class B Commercial Driver's License (CDL) will be required without restriction to operate a vehicle equipped with a manual transmission and air brakes, or the ability to obtain within 6 months from the date of hire and/or placement in the job. If the selected candidate does not currently possess CDL the District will provide 60 days from the date of hire to obtain CDL Learner’s Permit and 6 months to obtain CDL License. The district is willing to pay the cost of the CDL training program. Ability to obtain certification in Rigging, Forklift Operations, First Response-Oil and Chemical Spills, CPR, and First Aid. Ability to obtain pump station assistant status within 6 months from the date of hire and/or placement in the job. Physical Requirements / Working Environment Due to the District's response role and in the total scope of emergency management, this position may at times, be required to provide support before, during and after major storm events and emergency situations, such as hurricanes or other declared emergencies, depending on the assigned emergency response role. Regularly sets up, adjusts, controls, tests, and operates equipment to complete assignments. The work environment may be hot and humid with no facilities. Moves or otherwise transports equipment weighing up to 50 pounds or more. Other physical requirements include basic water skills and the ability to swim. Drive/operate equipment. Exposure to carbon monoxide and dust, (oils/grease/coolants/solvents), exposure to stinging/biting insects, snakes, alligators. Exposure to water pollution, contaminants, debris, move/transport equipment, walking, and rough terrain. Performs field work in a general outdoor environment with regular exposure to unpredictable weather conditions, sun, heat, and rain. Overtime will be required based on weather and/or environmental conditions. VETERANS’ PREFERENCE: Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans’ Preference will receive preference in employment for vacancies and are encouraged to apply. Candidates claiming Veterans’ Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. All documentation is due by the close of the job posting. Organization OM5505513 Mia Fs-Elct & Struct Maint Preparing equipment and sampling devices for daily field sampling projects Prepare and organize field equipment and supplies in the vehicles for field work Dispatching and/or field supervisor Staff in the field and laboratory Enter field data onto a computer database Create field test plans and procedures Paired in the field with a more experienced technician Produce detailed reports for all field work Install required system field devices Gather and test soil and concrete samples for construction clients Taking field measurements using calibrated instruments Help become a leader in field Perform field work tasks such as subcontractor oversight, site inspections, groundwater sampling and monitoring, and soil sampling Perform diagnosis and repair in the field Provide weekly reports of all field activities Performing the job duties required in the field Operate high-pressured water blasting and vacuum equipment Compile records and reports on field activities Maintaining field sampling records in accordance with regulatory requirements Provide service and customer support during field visits

As a Maintenance Mechanic III, you will perform a wide variety of tasks to ensure machinery, mechanical equipment, and facility structures remain in safe and reliable working condition. Duties may include machine repair, preventive and corrective maintenance, carpentry, painting, welding, plumbing,

Job Description Classification: Non-Exempt We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: • Medical, Dental, Vision, FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Direct Deposit, • Career Advancement, • Learning & Development Opportunities Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers’ manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230-volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Job Description Location: Doral, FL (Truck based at 6100 NW 97th Ave., Doral, FL) Jimco Maintenance, Inc. is a leading provider of maintenance and repair services across the Southeast. We are seeking a full-time Cart/Equipment Maintenance Technician/Truck Leader to service supermarket facilities at night throughout South Florida. This is a hands-on, field-based role that combines mechanical service work with responsibility for a dedicated service truck and assigned territory. The position operates as a two-person crew and requires strong mechanical aptitude, reliability, and the ability to work independently in outdoor retail environments. Watch a short video overview of this role: Requirements • Pressure cleaning, minor MIG welding, caster & wheel change, plus other miscellaneous repairs of rolling grocery store equipment (shopping carts, floats, bakery racks, etc.), • Mechanically inclined with experience performing preventive maintenance and minor repairs on industrial or retail equipment, • Ability to troubleshoot issues and complete field-ready repairs, • Comfortable working at night, and outdoors in varying weather conditions, • Ability to climb, stoop, bend, and lift up to 50 lbs, • Strong organizational, time-management, and route-planning skills, • Effective communicator; able to work independently while coordinating with the corporate office, • Knowledge of applicable safety regulations and DOT requirements, • Valid driver’s license with a clean driving record (5-year MVR review), • Reliable, self-motivated, and capable of operating as a single-person crew, • Willing and able to travel throughout Central Florida, • Must reside within 25 miles of Doral, FL (truck parking location), • Smartphone required for data and voice communication, • Must pass drug screening, background check, and federal Social Security verification Compensation Structure • Starting pay of $850 per week is based on completing the weekly scheduled service locations per week, • Additional pay is available for completing mandatory reactive work orders and supporting backlog catch-up, • Opportunities for increased earnings are tied directly to productivity, reliability, and operational needs, • 401(k) retirement plan with company matching, • Medical, dental, and vision insurance, • Life insurance coverage, • Paid time off (PTO)

The Manager of Customer Success is a senior operational leader responsible for directing and optimizing the end-to-end performance of the Customer Success function, with primary accountability for certification application processing and enterprise-level customer support operations. Customer Success

Job DescriptionJob Description – Senior Field Service, Assembly & Quality Technician (Cranes, Hoists & Winches)Position Overview We are looking for a Senior Field Service, Assembly & Quality Technician to join our team in Miami, FL. This position is primarily facility-based, focusing on the assembly, testing, quality control, and repair of cranes, hoists, and winches, with occasional travel to customer sites for installation, troubleshooting, and service. The ideal candidate is an experienced and hands-on technician who combines strong technical knowledge with a commitment to quality assurance and compliance. Key Responsibilities • Assemble, wire, and test cranes, hoists, winches, and electrical control panels at the Miami assembly facility., • Perform quality control inspections on assembled equipment to ensure compliance with UL508A, NEC, ASME B30.7, and OSHA standards., • Maintain and enforce quality assurance procedures throughout the assembly and service process., • Diagnose and repair electrical, mechanical, and hydraulic systems., • Perform preventive maintenance, functional testing, and final acceptance checks before equipment delivery., • Document and track non-conformities, corrective actions, and continuous improvement initiatives., • Provide technical support and occasional field service for installations, inspections, and troubleshooting., • Collaborate with engineering, production, and management to improve product reliability and reduce service issues., • Maintain accurate assembly records, test reports, inspection logs, and QA documentation., • Ensure strict adherence to safety protocols and promote a culture of quality and compliance. Required Qualifications • 5–7 years’ experience in assembly, installation, maintenance, and/or quality control of industrial lifting equipment (hoists, cranes, winches)., • Strong knowledge of electric motor controls, wiring, and troubleshooting., • Hands-on experience with VFDs, PLCs, and control panels., • Ability to read and verify electrical/mechanical schematics for QA and QC purposes., • Experience in inspection procedures, test plans, and quality reporting., • Familiarity with safety and compliance standards (ASME B30.7, UL508A, OSHA, NEC)., • Physically capable of workshop and occasional field work (lifting, climbing, working at heights)., • Valid driver’s license and ability to travel occasionally for service/installation. Preferred Skills (Nice-to-Have) • Certification in Quality Control / Quality Assurance (ISO 9001, Six Sigma, or similar)., • Certification in UL508A Panel Building or equivalent., • Experience with automation systems (CAN-BUS, Modbus, Ethernet/IP)., • Welding, rigging, or machining background., • Bilingual in English and Spanish (advantage for Miami operations)., • OSHA 30 or equivalent safety training. Soft Skills • Strong diagnostic and problem-solving abilities., • High attention to quality, safety, and compliance., • Excellent communication and teamwork skills., • Ability to work independently while ensuring documentation and standards are met., • Proactive in continuous improvement and identifying process enhancements. Employment Details • Location: Miami, FL (primary assembly facility), • Job Type: Full-time, permanent, • Travel: Occasional (customer installations, service trips)

Job Description Northbridge University is seeking a qualified full-time Welder Instructor. Our campuses are growing! If you have a passion for teaching, we'd like to talk to you. Classes typically run Monday to Thursday and can be held in the morning or evening. Full-Time Welding Instructor duties include teaching, directing, and coordinating academic activities and other academic-related activities. They support the administrative team to ensure the labs are up to code and in compliance, and participate in the curriculum and assessment committee. Lead Instructors are responsible for delivering high-quality instruction in their areas of expertise and ensuring that coursework aligns with institutional and regulatory standards. The Faculty member provides students with the knowledge and skills necessary in their chosen field of study by utilizing teaching skills, experience, and abilities to create a positive, nurturing and effective classroom environment in an effort to actively retain and successfully graduate, and obtain gainful employment from their program of study. This role requires a combination of academic credentials, professional experience, and relevant certifications to meet the field's expectations, depending on the program offering level. Minimum Requirements: • Current Valid Certified Welder., • A combination of work experience and/or required credentials in the field they will be teaching:, • Minimum of 2 years of successful teaching experience at the college level; preferably in the proprietary school setting; and a minimum of 2 years of work experience in the field. Essential Duties and Responsibilities: • Teaches a full time load (quarter credit is two courses per term; semester see faculty handbook), • Develop and deliver engaging course content, including lectures, assignments, and assessments, as outlined in the course syllabus., • Maintain accurate records of student performance, attendance, and grading., • Provide timely and constructive feedback to students, fostering a positive and supportive learning environment., • Comply with institutional policies and accreditation standards regarding faculty qualifications and instructional quality., • Complete a minimum of 8 hours of annual professional development training related to teaching or subject matter expertise., • Contribute to program improvement by collaborating with academic leadership and peers to enhance curriculum and instructional strategies. Promote a teaching-learning environment that encourages the academic progress of the students., • Maintain knowledge of the subject matter in the field(s) of appointment and create learning experiences to make the subject matter meaningful and relative to the students., • Maintains the content of the courses updated, and at a top level to achieve the highest standards of academic excellence possible., • Continuously relate the relevancy of all courses within the program to the current course being taught., • Provide, and review with students, a course syllabus on the first day of class that identifies the goals and objectives of the course, the teaching and evaluation methods, and the information and assignments that will be covered in the course, • Submit course syllabi and lesson plans, to the Dean of Academic Affairs no later than the first day of class each term/module., • Provide exams and answer key to the Dean of Academic Affairs no later than the week before of the exam date. Benefits: • Medical Coverage -Including additional options HSA, and FSAs - Dependent, and Health Care, • Dental/Vision Insurance Coverage, • 12 Paid Holidays / Paid Time Off / Paid Volunteer Day, • 401[k] with 50% Employer Matching, • Short-Term Disability Life Insurance, • Supplemental Life Insurance Options, • Growth Opportunities / Education Assistance and Professional Development Benefits No Cost Benefits: • Group Life Insurance, • Long Term Disability, • Talent Referral Program, • TicketsatWork - Discount Entertainment Program, • Enjoy a paid day off on your birthday (available to full-time employees after two years) Why Join Northbridge University? At Northbridge University, you become part of a community devoted to academic excellence, innovation, and human development. Every employee, from faculty to administrative staff, plays a key role in advancing the growth of our students while enhancing their own professional journey. We foster a culture of teamwork, respect, and ongoing learning, where innovative ideas are welcomed and talent is supported. Our employees enjoy professional growth opportunities, career stability, and the satisfaction of contributing to an organization that changes lives through education. At Northbridge University, you’re not just building a career—you’re creating a meaningful purpose. For additional information on who we are – Northbridge University is an Equal Opportunity/Affirmative Action Employer and does not discriminate based on race, color, religion, gender, age, national origin, disability, Protected Veteran status, sexual orientation, or any other characteristic protected by federal, state, or local law. The selected applicant will undergo a background check, educational verification, and drug testing.

Job DescriptionSummary of Primary Functions: Dobbs Equipment is seeking an experienced Shop Service Technician. Technicians are responsible for the repair, diagnosis, overhaul, and reconditioning maintenance of customer and company heavy equipment and components. Depending on the location and assignment, the technician will be responsible for some, or all the functions and duties listed below. These repairs may require working hours in addition to the normal work schedule for emergency calls or routine service as required. This job description does not include a complete listing of all the duties and functions of the position. Management reserves the right to assign other duties or projects as necessary. Essential Functions and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. (Other duties may be assigned) • Follow all safety rules and regulations in performing work assignments while maintaining a safe work environment and safe work habits., • Recondition, repair, service, and assemble any machines/industrial equipment., • Diagnose problems and determine what repairs are needed., • Perform any inspections as required., • Check and report any shortages and malfunctions to the Service Manager., • Maintain records and account for all time, parts, and supplies used in repairing and servicing both customer and dealership equipment., • Handle customer problems both objectively and tactfully., • Assist in directing work of helpers or on the job trainees and provide instructions as required., • Complete dis-assembly and inspection, as efficiently as possible, so parts may be ordered, and machine work can be scheduled promptly., • Perform all service tasks as assigned by the Service Manager, Supervisor, or Shop Foreman., • Prepare all reports and forms required in conjunction with job assignments., • Report to Service Manager any additional work required to ensure proper operation and safety of equipment., • Participate in service training programs required for development of skills and knowledge., • Maintain a clean work area and perform work in a neat and orderly fashion., • Bring to the attention of the Service Manager any shop tools, equipment or vehicle that is not in a serviceable condition or is unsafe to use., • Represent the dealership as a professional Service Technician at all times., • Operate trucks and equipment with extreme care and caution., • Maintain and care for shop tools, equipment, vehicles, and other employee’s belongings., • Reports to work on time, as scheduled., • Ability to work up to 12-hour days, varying shifts, weekends, and holidays as needed., • Ability to operate company vehicles and follow all motor vehicle state safety laws (if necessary)., • All employees are expected to adhere to the safety policies of Dobbs Equipment and the clients for whom we work., • Valid Driver’s License and maintain a clean driving record., • Knowledge of industrial equipment maintenance and operation., • Ability to perform basic repairs and required maintenance using special tools and equipment following Technical Manual procedures, • Associate degree or equivalent from two-year college or technical school or a minimum of 2 years related experience and/or equivalent combination (preferred)., • Stay current with technical changes., • Proficient knowledge of mechanical, electrical, and hydraulic systems., • Maintains current product knowledge of John Deere and competitive products., • Forklift Certification (preferred)., • Ability to communicate effectively with teammates., • Strong problem-solving skills., • Excellent time management skills., • Must be able to self-manage/self-motivate., • Flexible schedule (sometimes weekends or overtime)., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write diagnosis and work completed on routine reports and correspondence., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Develop skills in disassembly, assembly and repair of components and machines., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Quick learner with the ability to think out of the box., • Overnight travel less than 5% (Training)., • Ability to work using Personal Protective Equipment, including respirators, welding shields, hard hats, vests, safety glasses, goggles, gloves and etc., • Ability to use full range of motion for back, arms, hands, and fingers., • Able to use full range of motion for both legs, including climbing, twisting, squatting, and pushing with both legs., • Able to use hand tools, fuel hoses, lubrication systems on all equipment, • Able to climb onto or down from mobile construction equipment, typically 3-4 feet of climbing, for service and inspection., • The employee is frequently required to lift or carry loads greater than 50 lbs but less than 75 lbs., • Specific vision abilities required by this job include close, distance and color vision. Notice to Applicants: We participate in E-Verify in the United States. Drug Free and Alcohol-Free Workplace Notice.Dobbs Equipment is an Equal Opportunity and At-Will Employer.

Job Description Scope of Work The Graphic Artist Consultant provides services on an as-needed, project-based basis to the Standards Development team, creating, refining, and maintaining technical illustrations and figures that support industry standards and related publications. These consensus-based documents are foundational to the organization’s mission and serve as the basis for a wide range of products and services. Working collaboratively with subject matter experts, industry representatives, and program managers, the Graphic Artist will translate technical content into clear, accurate, and publication-ready visuals, including redrawing legacy figures and developing new illustrations as needed. Assignments may include · Creating, revising, and maintaining highly accurate technical illustrations and engineering figures for industry standards and technical publications. · Working with technical committees to interpret complex welding procedures, joint designs, symbols, and engineering specifications, translating them into precise, standards-compliant visual representations. · Applying professional-level knowledge of welding processes, metallurgy, fabrication methods, and welding codes to ensure technical accuracy in all drawings. · Redrawing legacy figures and developing new illustrations using advanced CAD software (e.g., AutoCAD, SolidWorks, Pro-E or similar parametric modeling platforms) with expert-level proficiency. · Producing detailed 2D and 3D models, schematics, cross-sections, and assemblies that clearly communicate engineering intent and manufacturability. · Collaborating with staff program managers, technical committee volunteers, and other AWS departments to validate accuracy, resolve ambiguities, and ensure alignment with consensus standards. · Maintaining drawing version control and adhering to established drafting conventions, symbol standards, and documentation protocols. · Optimizing legacy artwork by converting non-editable or outdated graphics into scalable, standards-ready CAD files. · Ensuring all figures meet publication quality, formatting, and reproducibility requirements across print and digital platforms. · Other services as need, upon agreement. Consulting Skills and Experience required · Advanced proficiency with AutoCAD, SolidWorks, Pro-E or similar drawing software. · Expert knowledge of welding or allied technologies · Excellent project management skills, with the ability to set priorities, make calls, organize meetings, and execute work plans and timelines on multiple projects, while prioritizing and managing time-sensitive tasks. · Strong editing and proofing skills. · Strong leadership and interpersonal skills, to effectively collaborate and communicate with internal and external stakeholders to serve a diverse set of volunteers and customers across our programs. · Ability to work independently in a hybrid or remote environment. · Proficiency in a PC-based environment, including Microsoft Windows, Office Suite, Outlook, Teams, Zoom, SharePoint, and web-based platforms. · Proficiency with Adobe Creative Suite (including Acrobat). · Experience working with non-profit board members and/or volunteers is desirable. Education · Bachelor’s degree from an accredited college/university.

Job Description Summary/objective The GSE Mechanic is responsible for the maintenance, repair, and troubleshooting of ground support equipment used in aviation operations. This includes equipment such as aircraft tugs, belt loaders, ground power units, air conditioning units, and refueling vehicles. The role ensures that all equipment operates safely and efficiently to support aircraft ground operations. Essential functions · Performs preventive maintenance inspections and service on machines. · Thoroughly cleans machines and machine parts, removing parts and reinstalling as necessary. · Oils and lubricates moving parts on machines to ensure effective performance. · Perform routine and preventive maintenance on a variety of ground support equipment. · Diagnose and repair mechanical, electrical, hydraulic, and pneumatic systems on GSE. · Conduct inspections to identify potential issues and ensure compliance with safety and operational standards. · Develop and implement solutions to address and rectify equipment issues promptly. · Records and reports damaged, worn, or broken parts. · Orders and installs replacement parts for machines. · Identifies the causes of unexpected breakdowns of machines. · Repairs broken machines quickly and efficiently. · Adhere to all safety procedures and regulations while performing maintenance and repair tasks. · Ensure equipment is properly maintained and meets safety standards before use. · Report any safety hazards or issues to the appropriate personnel. · Prepares reports documenting work performed (maintenance activities, repairs and inspections). · Cleans, organizes, inventories, stocks, and otherwise maintains shop areas, parts, tools, and supplies. · Work closely with other maintenance staff and departments to coordinate repair activities and minimize equipment downtime. · Provide guidance and training to junior mechanics or other team members as needed. · Coordinates with managers to schedule regular maintenance on machines. · Makes necessary modifications and implements tests runs; confers with manager regarding test results and makes additional alterations to machinery as required. · Work onsite at customer locations, as needed. Competencies (Knowledge, Skills and Abilities) · Mechanically inclined with great problem-solving skills. · Works well independently and with others. · Good communication skills. · Organized with attention to detail. · Proficient in mechanical, electrical, hydraulic, and pneumatic systems. · Strong diagnostic and problem-solving skills. · Ability to use diagnostic tools and equipment effectively. · Good communication skills and ability to work collaboratively. · Ability to work in a fast-paced and stressful environment. Supervisory responsibilities · None. Work environment · Work Conditions: The job may involve working in outdoor environments, around heavy machinery, and in varying weather conditions. · Schedule: Monday – Friday Physical demands · Prolonged periods standing and walking. · Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery. · Must be able to visually inspect machines. · Must be able to lift and carry up to 50 pounds unassisted. Travel required · Certain employees will require travel. Travel expectations are communicated to impacted employees Required education and experience · High school diploma or equivalent; technical certification in automotive or heavy equipment repair preferred. · Welding experience Preferred education and experience · Proven experience as a mechanic, preferably with ground support equipment or related fields. · Proven experience as a mechanic, preferably with fuel trucks. · Relevant certifications (e.g., ASE, EPA) are a plus. Other duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Company DescriptionSince 1983 Fortbrand Services has been providing rentals, leases, and sales of new and used airport equipment to Airlines, Airports, Ground Handlers, De-icing Companies, FBO’s, MRO’s, Into-Plane Fuelers, and Catering Companies. Specializing in two subtypes of airport equipment, Ground Support Equipment and Airport Maintenance Equipment, Fortbrand Services is your turnkey solutions provider to obtaining and paying for the equipment you need to run your operation today.Since 1983 Fortbrand Services has been providing rentals, leases, and sales of new and used airport equipment to Airlines, Airports, Ground Handlers, De-icing Companies, FBO’s, MRO’s, Into-Plane Fuelers, and Catering Companies.\r\n\r\nSpecializing in two subtypes of airport equipment, Ground Support Equipment and Airport Maintenance Equipment, Fortbrand Services is your turnkey solutions provider to obtaining and paying for the equipment you need to run your operation today.

Job DescriptionCrane Technician Position Summary: For more than 150 years, Morgan has been committed to offering world class solutions for the metals industry. At Morgan, we position our customers for success by collaborating with them to enhance safety, improve efficiency, and deliver value through the world’s most advanced material handling systems—while building a better future for our employees and community. Due to growth, we are looking for a full-time Crane Technician to join our team. You will assemble, install, and maintain Morgan’s industrial overhead cranes at customer sites across the U.S while ensuring that innovation comes standard with every order. Join our team to help us fulfill our vision: To challenge the possibilities of today by thinking differently. Responsibilities: • Assemble, install, wire, and commission Morgan industrial overhead cranes at customer sites across the U.S., • Perform preventative maintenance on overhead cranes, • Inspect mechanical and electrical systems on overhead cranes, • Troubleshoot and repair mechanical and electrical systems, including AC and DC electrical systems, • Must be able to work safely and efficiently at heights of up to 100 feet Education/Experience: • High school diploma or equivalent, • At least 1 year experience in a related industry, • Welding experience is a plus, • Ability to read blueprints and use metrological instruments such as micrometers, • Basic organization, communication, and problem-solving skills, • Must have own tools, • Skills in one or more of the following areas preferred:, • Millwright work, • Iron work, • Pipefitting, • Electrical meters, • Basic machining, • Basic welding, • Basic rigging Benefits: • Competitive wages, • Comprehensive benefits package, including:, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • 401(K), • 401(K) matching, • Paid time off About Morgan: For more than 150 years, Morgan Engineering has created a legacy as a world leader in material handling systems. Through the design, production and service of large-scale industrial overhead and gantry-type cranes and mill equipment, we provide the innovative technology and engineering expertise to move our clients’ businesses forward. To learn more about our company or apply for this position, visit . Disclaimer: Morgan Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Summary of Primary Functions: Dobbs Equipment is seeking an experienced Field Service Technician. Technicians are responsible for the repair, diagnosis, overhaul, and reconditioning maintenance of customer and company heavy equipment and components. Depending on the location and assignment, the technician will be responsible for some, or all the functions and duties listed below. These repairs may require working hours in addition to the normal work schedule for emergency calls or routine service as required. This job description does not include a complete listing of all the duties and functions of the position. Management reserves the right to assign other duties or projects as necessary. Essential Functions and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. (Other duties may be assigned) • Follow all safety rules and regulations in performing work assignments while maintaining a safe work environment and safe work habits., • Reads job order and observes and listens to equipment in operation to determine malfunction and plans work procedures., • Installs fuel injection nozzles and pumps, changes, or recharges batteries, and replaces transmissions, hydraulic systems, and component parts., • Examines protective guards, loose bolts, and specified safety devices on equipment, and makes adjustments., • Check and report any shortages and malfunctions to the Service Manager., • Lubricates moving parts and drives repaired equipment to verify conformance to specifications., • Fabricates special lifting or towing attachments, hydraulic systems, shields, or other devices according to blueprints or schematic drawings., • Removes, replaces, and repairs tires, undercarriages, and earth moving and timber harvesting attachments., • Maintain records and account for all time, parts, work orders and supplies used in repairing and servicing both customer and dealership equipment., • Report to Service Manager any additional work required to ensure proper operation and safety of equipment., • Maintains and cares for the shop tools and equipment., • Ensures work is performed safely and safe work procedures are followed throughout the department., • Reads schematics demoting operating specifications for unit or component and type of evaluation required., • Continues to work on revenue producing work as needed., • Tests unit for conformance with operating requirements such as specified horsepower and lifting performance., • Helps ensure that our new and used whole goods are in good working conditions., • Maintains assigned service vehicle in areas of cleanliness, daily maintenance, and inspections., • Participate in service training programs required for development of skills and knowledge., • Represent the dealership as a professional Service Technician at all times., • Reports to work on time, as scheduled., • Ability to work up to 12-hour days, varying shifts, weekends, and holidays as needed., • Ability to operate company vehicles and follow all motor vehicle state safety laws, • All employees are expected to adhere to the safety policies of Dobbs Equipment and the clients for whom we work., • Valid Driver’s License and maintain a clean driving record., • Knowledge of industrial equipment maintenance and operation., • Ability to perform basic repairs and required maintenance using special tools and equipment following Technical Manual procedures, • Associate degree or equivalent from two-year college or technical school or a minimum of 2 years related experience and/or equivalent combination (preferred)., • Stay current with technical changes., • Proficient knowledge of mechanical, electrical, and hydraulic systems., • Maintains current product knowledge of John Deere and competitive products., • Forklift Certification (preferred)., • Ability to communicate effectively with teammates., • Strong problem-solving skills., • Excellent time management skills., • Must be able to self-manage/self-motivate., • Flexible schedule (sometimes weekends or overtime)., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write diagnosis and work completed on routine reports and correspondence., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Develop skills in disassembly, assembly and repair of components and machines., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Quick learner with the ability to think out of the box., • Overnight travel less than 5% (Training). While performing the functions of this job, the employee regularly works in a service field setting and is exposed to frequently changing temperatures, wet or humid conditions, noise, vibration, fumes, odors, dust, and close proximity to moving mechanical parts. Physical Demands: The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is continuously required to: • Ability to work using Personal Protective Equipment, including respirators, welding shields, hard hats, vests, safety glasses, goggles, gloves and etc., • Ability to use full range of motion for back, arms, hands, and fingers., • Able to use full range of motion for both legs, including climbing, twisting, squatting, and pushing with both legs., • Able to use hand tools, fuel hoses, lubrication systems on all equipment, • Able to climb onto or down from mobile construction equipment, typically 3-4 feet of climbing, for service and inspection., • The employee is frequently required to lift or carry loads greater than 50 lbs but less than 75 lbs., • Specific vision abilities required by this job include close, distance and color vision. Dobbs Equipment is an Equal Employment Opportunity (EEO) and Affirmative Action employer. We are committed to providing an environment free of discrimination, harassment and retaliation both for our employees and applicants. We make all employment related decisions on the basis of an individual’s qualifications and job performance. We recruit, hire, promote, train, transfer, and make compensation decisions without regard to race, religion, color, creed, national origin, ancestry or citizenship status, sex, sexual orientation, gender, genetic information, marital status, pregnancy status, age, disability, protected veteran status, or any other characteristic protected by federal, state or local law. Notice to Applicants: We participate in E-Verify in the United States. Drug Free and Alcohol-Free Workplace Notice.Dobbs Equipment is an Equal Opportunity and At-Will Employer.

Job Description Job Title Machine Shop Prototype Machinist Company Snapshot: Headquartered in Miami, Tuuci is a global leader in premium shade products for hospitality, commercial, and residential outdoor settings. The Tuuci team includes experts in design, engineering, sales, marketing, and production. We work in a fast-paced, fun, and diverse environment where the exchange of ideas and professional growth are encouraged. Our teams strive to meet and exceed the Tuuci vision: to help people live their best life outdoors through inspiring design, enduring performance, and convivial service. Our culture supports this vision by encouraging creativity, driving excellence, and supporting personal growth and development. Position Summary: We are seeking a highly skilled Prototype Machinist & Fabricator to join our team in a fast-paced manufacturing and prototype environment. Expertise in fabrication techniques—including welding, forming, and machining—using steel, stainless steel, and aluminum is required. Essential Duties and Responsibilities: • Operate safely within a production and machine shop environment., • Collaborate closely with engineers on prototype designs and development projects., • Utilize manual lathes, milling machines, grinders, and other precision machining tools to produce high-accuracy components, tooling, and prototypes., • Interpret blueprints, sketches, and verbal instructions to plan machining and fabrication sequences., • Fabricate fixtures, prototype models, assemblies, and production tools from steel, stainless steel, and aluminum., • Support manufacturing by producing production parts, prototypes, and fixtures on schedule., • Work independently and as part of a team to meet project deadlines., • Proficiency in TIG/MIG welding of stainless steel and aluminum is a plus but not required., • 5 years of verifiable experience operating standard machinist tools and equipment. TUUCI is an equal opportunity employer. All applicants and employees are to be treated equally with the same rights and privileges with respect to recruiting, hiring, promotions, demotions, transfers, separations, compensation, and benefits regardless of their age, race, color, creed, religion, or ethnic origin, sex, sexual orientation, pregnancy-related status, marital status, veteran status, physical or mental disability, where the individual is otherwise qualified, or any other category protected by applicable law. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9. Company DescriptionTuuci is headquartered in Miami, FL and is the market leader in design, manufacture, and sale of commercial shade equipment, including market umbrellas, cabanas and related accessories. Tuuci products are manufactured primarily in Miami with global distribution supported by offices in The Netherlands and Vietnam. We are proud to be the preferred shade manufacturer for international luxury brands like Four Seasons, Ritz Carlton, Soho House etc. as well as domestic staples like Starbucks, Chipotle and Panera Bread. Tuuci was created in 1997, but we have not outgrown our collaborative start up culture. We work in a fast-paced, fun environment where the exchange of ideas and professional growth are encouraged. We are looking for fresh new talent to join and enhance our team and build a career within a growing company.Tuuci is headquartered in Miami, FL and is the market leader in design, manufacture, and sale of commercial shade equipment, including market umbrellas, cabanas and related accessories. \r\n\r\nTuuci products are manufactured primarily in Miami with global distribution supported by offices in The Netherlands and Vietnam. We are proud to be the preferred shade manufacturer for international luxury brands like Four Seasons, Ritz Carlton, Soho House etc. as well as domestic staples like Starbucks, Chipotle and Panera Bread.\r\n \r\nTuuci was created in 1997, but we have not outgrown our collaborative start up culture. We work in a fast-paced, fun environment where the exchange of ideas and professional growth are encouraged. We are looking for fresh new talent to join and enhance our team and build a career within a growing company.

Job DescriptionAt I Saw The Sign, we're more than just a sign company. We're storytellers. Our dynamic signage solutions, from eye-catching storefront displays to sleek vehicle wraps, we help businesses communicate their unique brand message. With a vast inventory and lightning-fast turnaround times, we're ready to bring your vision to life. Join our team and become part of a company that's shaping the way businesses are seen. We are seeking a skilled and detail-oriented Commercial Sign Fabrication Specialist to join our team. This full-time, on-site position involves the creation, assembly, and installation of various types of commercial signs. The ideal candidate will have experience in sign fabrication, a keen eye for detail, and a commitment to producing high-quality work. Job Requirements * Proven experience in commercial sign fabrication and installation. * Proficiency with tools and machinery used in sign making. * 1-2 years of experience in sign fabrication preferred * High school diploma or equivalent * Ability to stand for long periods of time (6 hours or more) * Ability to lift 50 or more pounds * Flexibility to lean over a waist-high table and use back and forth hand motion to apply vinyl letters and graphics to a substrate * Ability to work under pressure to output high volume, high-quality work * Ability to use light power equipment You Will Understand * Understanding measurements and manufacturing processes. * Working with rigid materials to create custom signage. * Cutting, Routing, Paint Prep, Sanding, Metal Work, Welding, Paint Mixing. * Operate and maintain equipment such as C.N.C Router, Grinders, Welders, Shear, etc. * Follow a layout to place dimensional or full-color graphic image(s) on a predetermined substrate or medium * Prepare substrates for vinyl application to include sanding, cutting, painting, laminating, cleaning, etc. * Fabrication of metal and other rigid substrates to complete sign builds. (Aluminum, Steel). * Perform quality assurance measures pre- and post-production by accurately reading and interpreting a Work * Order and then proofing for errors or unacceptable standards. * Maintaining a safe work environment when working with tools, drills, and cutters. * Perform finishing operations such as pre-package after paint has cured and prepare for installation.

Job Description Overview Tradesmen International is looking to expand our team of qualified Sheet Metal Duct Installers for current & future projects in and around Miami, FL. Most positions are first shift with a pay range of up to $30/hour based on experience & skill level. If you are a Sheet Metal Duct Installer and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • Select types of sheet metal according to building or design plans, • Measure and mark dimensions and reference lines on metal sheets, • Hang & Fabricate Ductwork, • Drill holes in metal for screws, bolts, and rivets, • Install & cut metal sheets with supportive frameworks, • Fabricate or alter parts at construction sites, • Maneuver and anchor large sheet metal parts, • Fasten seams or joints by welding, bolting, riveting, or soldering, • Fabrication On-Site or in Shop, • Setting Hangers, • Previous Sheet Metal experience, • Tools for the Trade, • Proper PPE must be worn, • OSHA-10 preferred Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job Description Join Barfield and Become a Part of the Adventure! If you are a talented Machinist interested in working in the exciting field of aviation, Barfield wants you! Barfield is more than just a prestigious name in the industry: it is subsidiary of Air France Industries KLM Engineering We are looking to hire a dedicated Machinist to join our team who will support our Hydraulic Department. Position: Machinist Department: Hydraulic Department Report to: Operations/Production Founded in 1945, Barfield has six facilities located near airports in Miami (MIA), Phoenix (PHX), Louisville (SDF), Atlanta (ATL) and Doral (MIA), to satisfy the needs of customers operating commercial or regional aircraft in North, Central and South America. Barfield is part of the Air France Industries KLM Engineering & Maintenance (AFI KLM E&M) network, a major MRO provider. With a workforce of 14,000, AFI KLM E&M offers technical support for airlines, ranging from airframe maintenance to engine overhaul and repair and supply of components. Duties and Responsibilities: • Reports to the Shop Manager., • Work in proximity with shops and engineering dept., • Considered an expert in his or her position/technicity., • As applicable to the designated shop: Is highly skilled in the operation and troubleshooting of machine shop equipment., • Needs to be familiar with a variety of the field’s concepts, practices, and procedures. Accomplish goals using positive experiences, judgement, and time management., • Understands the concept and function of all shop equipment., • Able to read, write, communicate, and understand English language and has an advance knowledge of math., • Possess advanced dexterity with hand tools., • Must have high school diploma or equivalent, technical college degree or military training/background in the required field., • 10 + years of specialized experience in the field., • Must have strong knowledge using measuring tools, such as micrometers, dial Indicators, vernier calipers, and other precision measuring tools required for the position., • Must be able to follow written instructions by the FAA (AD/SB/SL), OEM CMM, Airline engineering orders or other data as required to perform maintenance., • Must be able to read and interpret engineering blueprints., • Must have superior operating knowledge of the machinery in the shop i.e., lathe, milling machine, drill press, grinders, powered hand tools and welding equipment (Oxy-Acetylene, MIG, TIG)., • Be able to prioritize job tasks and functions as needed to maintain proper dept. workflow., • Must have the ability to work with little to no supervision., • CUSTOMER FOCUS We strive to provide the best services to our customers., • INTEGRITY We are personally accountable for the highest standards of ethical behavior., • TEAMWORK We are committed to a teamwork environment. Barfield is an equal opportunity employer. Equal Employment Opportunity is the Law. This law requires Barfield to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights As a Federal Contractor, Barfield is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

The welder will produce welded assemblies for commercial stainless steel/hollow metal doors and frames using MIG (GMAW), TIG (GTAW), LASER and/or other specified welding processes.

Job DescriptionDescription: PURPOSE: Assist Service Technician to diagnose and repair defects in any roofing system with zero-defects and assure all customer needs are efficiently and effectively addressed. DUTIES & RESPONSIBILITIES: • Always maintain a SAFE work environment., • Adhere to Best Roofing Fundamentals., • Complete work as assigned by the Service Technician., • Understand product specification requirements., • Adhere to company processes and procedures., • Properly investigate and solve all service requests with zero-defect workmanship., • Treat each customer respectfully; provide the BEST customer service possible. Direct customers to Service Technician to answer questions or address concerns., • Ability to work at heights on flat and inclined surfaces year-round in Florida weather required – roofers work on roofs., • Ability to climb ladders and set up work requirements in a safe manner required., • Ability to understand and follow oral and written instructions required., • Ability to lift material, tools, and equipment constantly throughout the day required to complete the job., • Ability to work at heights on flat and inclined surfaces year-round in Florida weather required – roofers work on roofs., • Ability to climb ladders and set up work requirements in a safe manner required., • Ability to understand and follow oral and written instructions required., • Ability to lift material, tools, and equipment constantly throughout the day required to complete the job., • Willingness to learn torching and heat welding roof material., • Bilingual English and Spanish preferred. Requirements:

Job DescriptionDescription: Vortex Doors, America’s highest quality and most customer-centric commercial and industrial door repair company, is seeking a motivated Automatic Door Service Technician to join our company. We are considering applicants with at least 4+ years of door industry experience! As a highly skilled Experienced Automatic Door Service Technician at Vortex Doors, you will play a crucial role in installing, repairing, and maintaining various types of doors, gates and docks, and related hardware, ensuring they function efficiently and safely for a growing branch. Strong access control with low energy gate operators and strong electrical gate automation experience required. Your attention to detail, problem-solving abilities, strong mechanical aptitude, and commitment to quality workmanship will be essential in meeting our customers' needs. We offer a great variety and complexity of service calls to customer sites while being safe and efficient out in the field. HIRING BONUS! UP TO $5,000 WITH COMMERCIAL OR INDUSTRIAL DOOR EXPERIENCE REQUIRED Key Responsibilities: • Install, troubleshoot, and repair a variety of Automatic Doors, Access control, Low energy Pedestrian doors with Glass and glazing exposure. Experience with Aluminum commercial doors a plus, docks, and related hardware using appropriate tools and equipment., • Diagnose and conduct routine repair door-related issues, such as broken springs, hinges, locks, and electrical components. If you have a desire to learn welding we can train!, • Install and configure door hardware, such as locks, handles, closers, low-voltage, and access control systems., • Ensure that all installed doors meet safety and building code regulations and standards., • Provide excellent customer service by addressing customer inquiries, explaining repair processes, and offering solutions to door-related problems., • Maintain accurate records of service visits, repairs, and installations, and provide reports as required., • Diagnose, identify, and resolve technical issues with doors efficiently. Communicate with customers offering cost-effective solutions., • Industry-best training in our state-of-the-art training facility learning Commercial and Retail door openings, hardware, storefront glazing, and automatic doors., • Room for growth and opportunity with multiple levels of career advancement to excel and grow in your career., • Continued learning classes on Manual operated doors and dock equipment training for Industrial openings and options for industry certifications., • Training on Hollow metal door, frame, and hardware., • Strong Safety Culture., • Positive Work Environment., • Recognitions and Rewards., • Comprehensive Pay, health benefits, 401K match, 8 company paid holidays, and Vacation/Sick program., • Company provided uniform, tools, and an annual boot allowance., • Use of Company provided vehicle to conduct customer service visits.Requirements:, • 4-5+ years’ experience in the commercial door service industry., • AAADM certified a plus but not required., • Access Control skills a plus.Excellent mechanical and technical skills., • High school diploma or equivalent., • Physically able to move items weighing 50 lbs. or higher., • Physical ability to continuously lift and bend, climb ladders up to 20’ in height, work on knees for extended periods of time and proficient operating power tools., • Possess interpersonal skills to relate to customers and solve issues., • Excellent communication skills to collaborate with others under any type of condition., • Excellent problem-solving and troubleshooting skills., • Ability to relay information in a fast-paced environment., • Reliable and Self Motivated, • Knowledge of various door types, brands, and hardware., • Ability to use hand and power tools effectively., • Proficiency in performing mathematical calculations involving fractions and reading a tape measure accurately for precise measurements and installations., • Knowledge of safety regulations and adherence to safety protocols., • Full-time shifts are available between Vortex business hours of 7:00 AM - 5:30 PM, Monday through Friday and must be able to work some overtime and on-call hours., • Continuous on-going training provided as you continue to grow with Vortex., • The job environment is fast paced and results oriented., • Be able to drive a company vehicle and possess a valid driver license., • Must pass Drug test, Background check and Motor Vehicle check

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Part-Time Bursar Cashier Specialist.February 24, 2026Position Overview.The Part-Time Bursar Cashier receives and accounts for all financial transactions involving cash, checks, credit card payments, and financial aid as indicated.This individual will be assigned related responsibilities that include

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Project Manager (CFA & Drilled Shaft Experience).BFC) is a Florida corporation and the U.Bauer Group based in Schrobenhausen, Germany.The Bauer Group is a world- renowned foundation contractor, designer, and builder of the world’s finest foundation equipment.BFC, as part of the Bauer construction

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Sonepar - - Responsibilities: Receiving items and materials; Picking and assembling customer orders; Packing and preparing items for shipping; Loading and unloading shipments; Sorting and storing stock in warehouse.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Trillium Staffing - - Responsibilities: Perform repair and maintenance on reefer units in accordance with manufacturer's specifications; Identify and obtain necessary replacement parts as needed to execute repairs; Conform to all safety and health requirements.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Pride Global - - Responsibilities: Assist in receiving, stocking, and shipping items in a fast-paced warehouse.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Niagara Bottling Inc - - Responsibilities: Receive and process all inbound orders into the Warehouse Management System (WMS), including raw materials, pallets, ingredients, and internal transfers.Operate a forklift or work with the LGV (Laser Guided Vehicle) and handling system.Follow standard oper

National Assemblers - - Responsibilities: Receive customer orders to complete installation or assembly jobs in customer's homes; Communicate with the customer to confirm all appointments; Assemble the product to National Assembler's specifications; Build a strong rapport with customers and ensure 1

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Niagara Bottling Inc - - Responsibilities: Train and lead operators, mechanics and supervisors on technical procedures related to high-speed bottle manufacturing and packaging; Adhere to and enforce highest standards in safety and good manufacturing practices plant-wide; Rapid identification of mac