Trabajos installation en Norfolk, Virginia - Page 8Crear alertas

Epsilon Systems is seeking a full time Shipfitter II for the Ship Repair Sector located in Portsmouth, VA. Summary: Repairs, modifies, installs and dismantles various shipboard hulls, bulkheads or decks. Designs and fabricates complex fixtures and jigs. Responsibilities: \n • Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.\n, • Reads and understands Epsilon Systems Mission Readiness Group PPE Policy.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.\n, • Lays out material prior to performing machining operations to prevent possible errors.\n, • Fabricates parts to close tolerances ensuring finish requirements of the drawings are achieved.\n, • Maintains good housekeeping practices, turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Ensures all tools listed on the "Required Tools List" are available for use within two weeks of your employment at Epsilon.\n, • Qualifies as a Shipfitter in accordance with Epsilon Systems Mission Readiness Group Process Instructions.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.\n, • Notifies Foreman of unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Reads and understands complex terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.\n, • Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes.\n, • Determines fit-up requirements for a wide range of structural components in accordance with required technical drawings, manuals and instructions.\n, • Installs complex deck, hull and bulkhead systems IAW required technical drawings, manuals and instructions.\n, • Designs, fabricates and installs complex fixtures, jigs and targets to ensure proper alignment during welding/ brazing procedures.\n, • Determines size and material requirements for system modification or installation.\n, • Ensures control and assumes responsibility for Level I and material controls in accordance with Process Instruction\n, • Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension,\n, • Will provide mentoring to junior craftsman.\n, • Frequent travel and overtime are required.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with Shipfitting practices in a repair department or shipyard. Knowledge and practical skills tests required.\n, • 5 years' of experience as a shipfitter.\n, • Understands and performs the setup, alignment, and operation of various portable tools and hand tools used in the trade including plasma cutting machines and oxy/fuel torches.\n, • Ability to read a ruler/tape measure.\n, • Ability to use lay-out tools such as tool scales, squares, combination squares, trammel points.\n, • Ability to properly prepare structural components for post assembly welding by performing end preparations such as beveling, grinding etc.\n, • Must be able to understand and perform the set-up, alignment, and operation of various portable tools and hand tools used in the trade including plasma cutting machines and oxy/fuel torches.\n, • Has more advanced knowledge of the following: shipboard plate (hull, deck, bulkhead) systems (repair/installation practices, procedures, alignments and material requirements), blue print reading and interpretation, MILSPEC requirements.\n, • Understands fitting of structural components using dogs, wedges, strong-backs etc.\n, • Must be able to fit structural components to close tolerance requirements to prevent increased welding to bridge gaps.\n, • Ability to fabricate and install components as directed by Technical Work documents.\n, • Ability to fabricate molds/templates for structural forming including plate rolling with multiple offsets.\n, • Must have the ability to obtain and maintain government base access and private shipyard access.\n, • Ability to obtain and maintain National Security Clearance Level Secret.\n, • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs. in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n, • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Epsilon Systems is currently seeking a full-time Welder Specialist in the ME division located in Portsmouth, VA. Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments. Responsibilities: \n • Reports to the Production Manager. Once assigned to a project, reports directly to the project Foreman in the performance of his/her responsibilities. In the absence of the Foreman, he/she will take responsibility for the job.\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Reads and understands Epsilon Systems Mission Readiness Group PPE Policy.\n, • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.\n, • Lays out material prior to performing machining operations to prevent possible errors.\n, • Machines parts to close tolerances ensuring finish requirements of the drawings are achieved.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Qualifies as a Welder in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.\n, • Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes.\n, • Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Ensures control and assumes responsibility for Level I material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Expertly performs all tasks required as a Welder.\n, • Provides mentoring to junior craftsman.\n, • Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures/procedures.\n, • High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.\n, • 8 years' experience as a welder.\n, • Qualifies as a Welder/Workmanship Inspector in accordance with Epsilon Systems -Mission Readiness Group Work Instructions and welding procedures.\n, • Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.\n, • Must be qualified in more than 15 welding/brazing processes to include flux core welding.\n, • Must be qualified in Automated welding processes to include exotic metals such as Inconnel, Titanium, Duplex Stainless, Ferrilium.\n, • Ability to obtain and maintain access to US Navy ships and government facilities.\n, • Ability to communicate effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n Current DoD Secret Security Clearance ADA Notations: Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Work conditions vary from indoors to outdoor, very hot to very cold. Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Epsilon Systems is currently seeking a full-time Welder Specialist (Aluminum) in the ME division located in Portsmouth, VA. Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments. Responsibilities: \n • Reports to the Production Manager. Once assigned to a project, reports directly to the project Foreman in the performance of his/her responsibilities. In the absence of the Foreman, he/she will take responsibility for the job.\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Reads and understands Epsilon Systems Mission Readiness Group PPE Policy.\n, • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.\n, • Lays out material prior to performing machining operations to prevent possible errors.\n, • Machines parts to close tolerances ensuring finish requirements of the drawings are achieved.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Qualifies as a Welder in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.\n, • Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes.\n, • Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Ensures control and assumes responsibility for Level I material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Expertly performs all tasks required as a Welder.\n, • Provides mentoring to junior craftsman.\n, • Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures/procedures.\n, • High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.\n, • 8 years' experience as a welder.\n, • Qualifies as a Welder/Workmanship Inspector in accordance with Epsilon Systems -Mission Readiness Group Work Instructions and welding procedures.\n, • Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.\n, • Must be qualified in more than 15 welding/brazing processes to include flux core welding.\n, • Must be qualified in Automated welding processes to include exotic metals such as Inconnel, Titanium, Duplex Stainless, Ferrilium.\n, • Ability to obtain and maintain access to US Navy ships and government facilities.\n, • Ability to communicate effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n Current DoD Secret Security Clearance ADA Notations: Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Work conditions vary from indoors to outdoor, very hot to very cold. Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The role of the welder is to provide day-to-day Shipboard installation and welding support for a variety of RF, audio, video, and communication systems installations. This position reports to the Installation Group Project Manager. This job posting is always active. Resumes will be collected even when there are no openings. Work Model: Onsite Responsibilities Essential Duties & Job Functions: \n • Working with Task Leaders, program/project managers, and SMEs, the welder will assist with:\n, • the Shipboard installation and integration of complex audio visual display\n, • various communication and electronic warfare systems\n, • related ancillary and computer based systems onboard naval ships and command centers worldwide.\n Mandatory: \n • Must be a U.S. citizen.\n, • Must have or be able to obtain a Secret clearance.\n, • Must have High School diploma.\n, • Must be willing to travel up to 75% CONUS/OCONUS.\n, • Must be willing to work extended hours including weekends and holidays.\n, • Must have a valid driver's license and reliable transportation.\n, • Must have experience in welding steel and aluminum.\n, • Must have experience welding in a shipyard environment.\n, • Must have the ability to lay out and perform structural modifications and install foundations based on reading SIDs and ICDs\n, • Must be willing to perform other installation tasks in addition to welding. Such as cable installation, priming, lagging, painting, on load and offload of equipment and materials.\n, • Must be able to successfully pass a pre-employment background check and pre-hire drug test.\n\n Preferred: \n • Experience brazing copper nickel pipe and Oxy Fuel torch operation.\n, • CPR and first aid training experience.\n, • Confined space training.\n, • Climber safety training.\n\n Working Conditions: \n • This is a full-time position in support of the Chugach integration and installation tasking team lead. The work may be performed at (Location TBD), industrial areas to include; shipyard, Navy/Coast Guard bases, shipboard and shore site locations.\n, • Work is performed inside industrial environments and subject to working around exposures to hazards that may cause bodily harm, cuts, bruises, burns, etc.\n, • Work may also be performed outside even during in climate weather.\n, • Work may be performed at heights (aloft) where fall protection is required. \n, • Work may be performed welding and cutting of metal.\n, • Work may be performed off a ladder.\n\n Physical Requirements: \n • Ability to lift 45 lbs., climb vertical ladders, operate and work around heavy machinery.\n, • Work at heights (aloft).\n, • Operate power tools safely.\n, • Carry equipment and machinery around ships. \n, • Ability to stand and walk most of the shift.\n, • Kneel and crawl at work site.\n, • Crouch through void openings.\n, • Safely evacuate ship during an emergency.\n\n Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email [email protected]. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The role of the welder is to provide day-to-day Shipboard installation and welding support for a variety of RF, audio, video, and communication systems installations. This position reports to the Installation Group Project Manager. This job posting is always active. Resumes will be collected even when there are no openings. Work Model: Onsite Responsibilities Essential Duties & Job Functions: \n • Working with Task Leaders, program/project managers, and SMEs, the welder will assist with:\n, • the Shipboard installation and integration of complex audio visual display\n, • various communication and electronic warfare systems\n, • related ancillary and computer based systems onboard naval ships and command centers worldwide.\n Mandatory: \n • Must be a U.S. citizen.\n, • Must have or be able to obtain a Secret clearance.\n, • Must have High School diploma.\n, • Must be willing to travel up to 75% CONUS/OCONUS.\n, • Must be willing to work extended hours including weekends and holidays.\n, • Must have a valid driver's license and reliable transportation.\n, • Must have experience in welding steel and aluminum.\n, • Must have experience welding in a shipyard environment.\n, • Must have the ability to lay out and perform structural modifications and install foundations based on reading SIDs and ICDs\n, • Must be willing to perform other installation tasks in addition to welding. Such as cable installation, priming, lagging, painting, on load and offload of equipment and materials.\n, • Must be able to successfully pass a pre-employment background check and pre-hire drug test.\n\n Preferred: \n • Experience brazing copper nickel pipe and Oxy Fuel torch operation.\n, • CPR and first aid training experience.\n, • Confined space training.\n, • Climber safety training.\n\n Working Conditions: \n • This is a full-time position in support of the Chugach integration and installation tasking team lead. The work may be performed at (Location TBD), industrial areas to include; shipyard, Navy/Coast Guard bases, shipboard and shore site locations.\n, • Work is performed inside industrial environments and subject to working around exposures to hazards that may cause bodily harm, cuts, bruises, burns, etc.\n, • Work may also be performed outside even during in climate weather.\n, • Work may be performed at heights (aloft) where fall protection is required. \n, • Work may be performed welding and cutting of metal.\n, • Work may be performed off a ladder.\n\n Physical Requirements: \n • Ability to lift 45 lbs., climb vertical ladders, operate and work around heavy machinery.\n, • Work at heights (aloft).\n, • Operate power tools safely.\n, • Carry equipment and machinery around ships. \n, • Ability to stand and walk most of the shift.\n, • Kneel and crawl at work site.\n, • Crouch through void openings.\n, • Safely evacuate ship during an emergency.\n\n Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email [email protected]. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

Job Description Overview Tradesmen International is immediately hiring experienced Marine Deck Electricians for projects located in and around Newport News, VA. This is a firsts hift opportunity with a pay range of up to $37.31/hour based on experience plus $140/Per Diem to Travelers 60+ miles from the job site. If you are a Marine Deck Electrician and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: * Use electrical meters and test instruments (voltohm meters, clamp-on ammeters, insulation resistance testers, meggers, etc.) • Lay off and mount electrical equipment and wireways, • Install cable penetrations in equipment, bulkheads, and decks Minimum of 3+ years in the electrical field (Industrial, Marine, or Commercial Nuclear applications) * Active DOD clearance required * Ability to read and interpret shipboard electrical installation drawings, wiring tables, schematics, and work packages * Able to work independently with proper instruction * Physically able to: climb vertical/inclined ladders, crawl, bend, stoop, work at heights, and work in confined spaces * Must pass Stud Shooting training class and associated vision test (administered by NNS) Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Lead Mechanic Supervisor- Gas Free Purpose: Colonna's Shipyard is seeking a Lead Mechanic Supervisor -Gas Free to support day shift operations in our Shipyard in Norfolk, VA. Position Summary: Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Job Description: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 7 years related trade experience (in the trade to be supervised)., • Must have the ability to understand job specifications, drawings, and corresponding technical references., • Must be able to work effectively with others., • Prefer some previous supervisory/mentoring experience (such as make-up supervisor). \n\n Security Requirements: • Must be able to access government facilities and be DBIDS eligible., • Position requires you to obtain and maintain a DBIDS., • Position requires US Citizenship.\n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods., • Able to perform other duties as required which may involve high heat, humidity, noise, and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. \n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Combination Welder/Shipfitter General Foreman - Steel America Purpose: Steel America, a division of Colonna's Shipyard, is seeking a Combination Welder/Shipfitter General Foreman to support operations at our site in Norfolk, VA. *Dislocation support available on a case-by-case basis, up to $5,000. Position Summary: Position maintains detailed understanding of project specifications and all requirements necessary for appropriate trades support, ensuring safe and efficient production in ship repair/industrial fabrication operations. Provides oversight to qualified trades workforce & trades supervision and is responsible for meeting overall schedule, budget, quality, and safety goals of work assigned. The position is located onsite in Norfolk, VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require limited travel. Essential Duties and Responsibilities: Supports labor requirements for completion of job assignment. Understand specifications, blueprints, and job orders in order to effectively communicate duties to work teams. Maintains adequate personnel/manning levels, production space, tooling, and equipment assets, while establishing work processes to meet production schedules. Suggests changes in working conditions and use of equipment to increase efficiency of shop, department, or work crews. Analyzes and resolves work problems to minimize disruptions to production schedule. Key responsibilities include: • Manages all shop resources by assigning trades personnel to Foremen based on project needs., • Supports trades foremen in supervising, assigning, coordinating, training, and evaluating semi-skilled and skilled trades personnel according to their skill, experience, and job knowledge. Recommends training to enhance skill and productivity of employees and assists in development of training processes/procedures. Continually monitor foremen's project designations, deck plate presence, understanding of work scope, and efficiency of trades management., • Manages lifecycle of shop personnel through all phases of employment, to include: hiring and retention efforts of shop personnel, as well as developing/delivering coaching and disciplinary actions needed to address performance concerns. Responsible for personnel administration needs, to include recommendations/handling of change requests facilitated by EANs (pay, reclassification, etc.)., • Engaged in workforce development by identifying candidates for additional development/mentorship opportunities, support succession planning efforts, and ensuring assigned apprentices have appropriate oversight and developmental resources., • Breaks broad projects down to practical action plans, ensuring adequate shop manning resources, and develops/executes POD for all shop resources (with the input of Foreman) daily to ensure production goals are executed safely and efficiently., • Responsible for final approval and presentation of all project deliverables via condition reports and approval/management of all material orders, ensuring contractual requirements and period of performance are met., • Responsible for complying with all technical aspects of the job including adherence to all drawings, procedures, etc. and manages test and inspection plans for assigned areas (overseeing submittal of required documentation, ensure foreman attend inspections as required, etc.)., • Must have a Bachelors/Registered Apprentice (grad) and at least 2 years relative trades experience (or HS + 6 years trades experience) and at least 2 years of prior supervisory experience., • Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding), and FCAW (Flux Core Arc Welding)., • Must have knowledge of AWS D1.1 (Structural Steel) and NAVSEA code/requirements (MIL-STD-1688 & MIL-STD-1689)., • Must have both welding and fitting experience in new industrial fabrication/new construction., • Must have at least one (1) year of experience in welding automation., • Must be able to understand job specifications, drawings, and corresponding technical references years supervisory experience., • Must have well-developed communication skills, both verbal and written, to effectively communicate with employees/leadership/customers and prepare/deliver written reports and correspondence., • Must have regular, reliable attendance.\n\n Preferred Skills/Qualifications: • Exposure to or experience supporting multiple trades is highly preferred, • Experience performing visual inspections of welds and fit ups preferred., • Ability to perform GTAW (Gas Tungsten Arc Welding) and SAW (Submerged Arc Welding) preferred., • Experience or certification in welding NDT preferred., • CWI certification preferred.\n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Lead Mechanic Supervisor - Corrosion Control Purpose: Colonna's Shipyard is seeking a Lead Mechanic Supervisor - Corrosion Control to support our 2nd shift (3pm-11:30PM) operations in our Shipyard in Norfolk, VA. Position Summary: Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Essential Duties and Responsibilities: Key responsibilities include: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc., • Manage, supervise, and direct the day-to-day efforts of the Corrosion Control employees., • 75-80% of the time will be spent aboard ship or in the shop supervising staff.\n\n Additionally, position will: • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Provides input to management and project teams to support schedule, progress, ETC/EAC updates for all projects assigned to them. \n\n Required Qualifications: • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised)., • Must have the ability to understand job specifications, drawings, and corresponding technical references., • Must be able to work effectively with others., • Must be steady, flexible, reliable worker. \n\n Preferred Skilled/Qualifications: • Some previous supervisory/mentoring experience (such as make-up supervisor), • NBPI Certification (NAVSEA basic paint inspector) preferred., • C-7 (Abrasive Blaster) Certification preferred., • C-12 (Airless Spray Applicator) Certification preferred., • C-13 (Ultra- High-Pressure water-jetting) Certification preferred., • C-14 (Plural Component Pump operator/Sprayer) Certification preferred. \n\n Security Requirements: • Must be able to access government facilities and be DBIDS eligible., • Position requires US Citizenship.\n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Lead Mechanic Supervisor - Rigging Purpose: Colonna's Shipyard, is seeking a Lead Mechanic Supervisor in Norfolk, VA. Position Summary: Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Essential Duties and Responsibilities: Key responsibilities include: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Provides input to management and project teams to support schedule, progress, ETC/EAC updates for all projects assigned to them.\n\n Required Qualifications: • Bachelors or Registered Apprentice (grad) or HS + 6 years related trade experience (in the trade to be supervised), • Must have experience in crane cable removal and install., • Ability to understand job specifications, drawings, and corresponding technical references., • Must have knowledge of OSHA 1915 for Shipyard and OSHA 1926 for Commercial Vessels., • Must have previous supervisory experience., • Must have expert knowledge of and ability to use hand tools and instruments associated with the trade., • Must be able to work effectively with others., • Must be a steady, reliable worker., • Must be able to comprehend and follow complex instructions., • Minimal Travel; 10% or less\n\n Security Requirements: • Position requires you to obtain and maintain access to Government Facilities (DBIDS)., • Position requires US Citizenship.\n\n Physical Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Requisition Number: 25629 Required Travel: 26 - 50% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $50,000.00 - $60,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary Join HII as we keep the world's most powerful Navy afloat! Join our Elevator Support Unit (ESU) as a Marine Mechanic! This position will support contracted skilled trades work on Weapon Elevators and Aircraft Elevators and their systems on U.S. Navy ships. Travel within and outside of the continental United States may be required. This is a full-time position, located in Chesapeake, VA. What You Will Do • Installs, operates, maintains, repairs and modifies shipboard elevator mechanical and hydraulic equipment., • Performs a variety of maintenance and technical support on elevators and elevator doors such as equipment, integrated systems and subsystems, and software at customer and/or field locations., • Analyzes and evaluates elevator operations and related performance., • Troubleshoots, diagnoses malfunctions, and grooms elevators to eliminate problem in minimum time. Installs, upgrades and removes elevator and elevator door components ensuring coordinative engineering field change., • Applies comprehensive understanding of production and processes toward completion of assignments., • Responsible for interfacing with customers, managing subcontractors and ability to provide work direction to others., • Develops and uses technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports., • Schedules, reports and briefs customers and senior management. Performs duties outside of specialty in order to complete installation or work assignment.\n What You Must Have • High School education, or Trade School or equivalent, and 4 years of related experience., • Must provide own hand tools as designated per trades specialty., • Must have experience performing troubleshooting, preventative maintenance and testing of mechanical systems., • Must be able to read drawings and schematics., • Must be able to conduct on-site installation of equipment while following established safety, qualify control & testing procedures., • Must be able to calibrate and make minor repairs on tools/equipment., • Must be able to obtain and maintain base access credentials., • Must be able to obtain and maintain a DoD Security Clearance., • Must be a U.S. Citizen.\n Preferred: Bonus Points For • Experience related to maintenance and repair of shipboard aircraft elevator and/or ordnance handling equipment and vertical package conveyors preferred., • Experience in the operation, repair and maintenance of marine electro-mechanical and/or hydraulic systems highly desired., • Prior Shipboard experience preferred., • Candidates who hold a current or active DoD secret clearance or higher preferred., • Candidate with related technical training, degrees and/or certifications preferred.\n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: SHT Mechanic REPORTS TO: Superintenden SUMMARY Removal and installation of hull treatment and non-metallic coatings on United States Navy nuclear-powered submarines. Position requires a willingness to learn, dependability, and the ability to think critically. ESSENTIAL DUTIES & RESPONSIBILITIES • Ensure work is done safely and meets quality standards., • Ability to perform carpentry-type duties to include use of manual tools, power tools, and building of containments., • Read and interpret documents as necessary, such as operating and maintenance manuals, safety rules and regulations, procedure manuals, etc., • May prepare molds and templates for fabrication of hull treatment., • Maintain a clean work environment where coatings work is being performed., • Demonstrate comprehension of complex shapes and the ability to understand symmetrical gaps both parallel and perpendicular to the ships surface shape., • Mixing of different types of solvent and adhesive materials., • Use of troweling tools and adhesives, and work with equipment specific to hull treatment installations, • Understanding fairness and flushness with regards to surface preparation., • Follow all company rules and policies., • Provide a great level of attention to detail and focus on the given task., • May be required to perform additional duties as deemed necessary by the Superintendent., • Must be willing to comply with clean shaven standards needed to wear half/full face respirator., • Commercial Carpentry, • Ceramic or Composite Tile Installation, • Must be able to work cooperatively and productively with other employees and shipyard personnel., • Must be able identify and measure material., • Must be able to calculate basic figures., • Must be able to carry out instructions furnished in oral, written, or diagram form., • Must be able to problem solve, organize, and prioritize work., • Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, confined spaces, precarious places, proximity to other employees. To avoid injury, safety clothing is required along with safety devices to protect eyes, mouth, or hearing., • Regularly required to walk; frequently required to stand, stoop, kneel, crouch, climb, balance, or crawl, occasionally required to sit, required to reach with hands and arms, use hands to feel, grip, or handle, regularly required to lift and/or move up to 50 pounds, required use of vision to see up close, distance, and peripherally, as well as depth perception and ability to adjust focus., • May be made to enable qualified individuals with disabilities to perform essential job functions.\n Location Portsmouth, VA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

HVAC Installation & Repair Supervisor: St. Provides repair, maintenance, and service of HVAC systems according to building codes and standards. Knowledge in web-based HVAC control systems.

Leaf Home Stairlift is the nation’s fastest growing safety company and we are looking for new installers in your area NOW. Start out as an installer and you can even work your way up to becoming a trainer, an installation manager or regional manager in no time. Stop wasting your time and effort searching for and bidding on jobs only to lose out to another contractor. Spend your time doing what you do best … using your professional craftsmanship skills to help seniors age in the homes they love. We are looking for individuals with strong mechanical / carpentry skills that possess a strong attention to detail. You will be primarily providing installation of stairlifts both inside and outside of the home. Requirements: • Prefer 1 year of carpentry / construction skills including light electrical skills (the ability to add or move outlets)., • A box truck, cargo van, full size pickup or full size SUV., • Current or ability to obtain general liability insurance and workers compensation insurance or exemption depending on the state (we can assist)., • Must be willing to travel. Most travel is within 100 miles of the office but further travel could be available for those willing to do so., • Must have all necessary tools for the job including:, • Box wrenches, Allen wrenches, 12” Miter Saw, Nut Driver Set and Drill Driver Extension What’s in it for me: • This is a 1099 contractors position, • Stairlift installation compensation averages around $250-$350 and requires between 2-4 hours to install. Can be slightly more or less depending on the job. Occasionally we will install curved stairlifts with an average compensation around $600 requiring about 4-6 hours to install., • All jobs are presold … no sales involved, just the installation., • Flexible Schedule … Work Part Time or Full Time., • No out of pocket expenses … We purchase and stage all jobs for you so no wasted time or reimbursements needed., • Weekly Pay – We pay per job each week by direct deposit.

EchoStar is reimagining the future of connectivity.Our business reach spans satellite television service, live-streaming and on-demand programming, smart home installation services, mobile plans and products.Today, our brands include Boost Mobile, DISH TV, Gen Mobile, Hughes and Sling TV.Our Technic

EchoStar is reimagining the future of connectivity.Our business reach spans satellite television service, live-streaming and on-demand programming, smart home installation services, mobile plans and products.Today, our brands include Boost Mobile, DISH TV, Gen Mobile, Hughes and Sling TV.Our Technic

Our business reach spans satellite television service, live-streaming and on-demand programming, smart home installation services, mobile plans and products. Clear, step-by-step guidance for installations and service.

Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world-class customer experience, educating and connecting more Americans with every home you visit.

Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world-class customer experience, educating and connecting more Americans with every home you visit.

Job DescriptionDescription: Are You Ready to Lead? If you’re driven, ambitious, and ready to take control of your career, Erie Home’s Sales Manager in Training (MIT) program is your opportunity to step into leadership—fast. We’re breaking records and expanding nationwide, and with 98% of our sales leaders promoted from within, we’re looking for high-performers to join our structured leadership development program. This is not just another sales job—it's a clear path to management with industry-leading earnings and real career growth. Day in the Life: • Attend pre-confirmed appointments starting between 1 pm and 7:30 pm, • Deliver dynamic in-home presentations & showcase industry-leading products, • Use innovative software for precise measurements, • Assess damage via ladder or attic inspections – no need to get on the roof!, • Guide homeowners through financing & contract processing with confidence Build Toward Leadership as an MIT: • Shadow Sales Managers & learn leadership fundamentals, • Gain hands-on mentorship & leadership development while excelling in sales, • Begin mentoring new hires & assisting in training initiatives, • Take on increasing responsibility in coaching, team development, & strategy, • Work cross-functionally with marketing & installation teams to ensure a seamless homeowner experience Step Into a Sales Management Role: • Transition from top performer to top leader, leading & developing your own team, • Drive sales performance, train new reps, & lead strategy meetings, • Earn higher commissions & team-based bonuses as you advance in leadership Compensation & Benefits: • Base pay of $600/week plus uncapped commissions with weekly pay: earn an average of $2,500 per sale (paid before installation) with monthly bonuses, • Top performers earn $150,000–$250,000+ annually, • $3,000 Quick Start paid during early intervals as you build success, • Full Benefits: medical, dental, vision, life insurance, & 401k with company match, • Exclusive Military Benefits: tenure-based bonuses & annual retreatRequirements:, • Driven individuals eager to learn, lead, and grow, • Sales experience preferred but not required—we provide world-class training, • Valid driver’s license, reliable transportation with auto insurance, and the ability to travel to and from in-home appointments, • Availability for midday, evening, and weekend appointments Established in 1976, Erie Home has grown into a nationwide leader in home improvement, with over 100 U.S. locations and $600M+ in annual revenue. Our record-breaking success and continued growth have earned us a Top 10 ranking on Qualified Remodeler's Top 500 for 2025 and a spot on the Inc. 5000 List of Fastest Growing Companies, reinforcing our reputation as an industry innovator and trusted provider. At Erie Home, we do more than improve houses—we enhance homeowners' quality of life by delivering premier, high-quality home improvement solutions that protect their most valuable asset: their home. As we expand, we remain committed to developing top-tier sales professionals and equipping them with the tools to thrive in a high-growth, high-reward environment. If you're hungry for growth, passionate about sales, and ready to build your career with a company that values its team, apply today and start your leadership journey with Erie Home! Erie Home is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, political affiliation, sexual orientation, marital status, disability, age, military service, or any other protected class. If you need a reasonable accommodation due to a disability, please contact Human Resources with your request and contact information.

Electrical Technician-US Norfolk, VA 3+ Month Contract Pay: 26.25/hr, W 2 Onsite Perform all routine, corrective and emergency maintenance activities to keep all commercial lighting and commercial electrical systems in working order. Diagnose problems and then repair/replace defective parts as required. Primary Responsibilities: • Provide and maintain a high quality of customer service to customer base., • Performs electrical maintenance and repair work; install/replace fixtures, switches, receptacles and wiring in compliance with current National Electric Code, • Inspect and test components of electrical systems, including transformers, transfer switches and switch gears, • Utilize blueprints, wiring diagrams and manufacturer’s installation manuals to complete assigned projects, • Respond quickly to trouble calls when a breakdown occurs. Communicate to management whether the problem can be corrected and whether business can continue as usual. If regular activities must be stopped, the electrician will have to estimate how long a shutdown will last and identify alternatives for operation., • Make periodic inspection for new and existing electrical components (120v, 208v, 240v, 277v and 480v three phase), including, but not limited to, wiring, conduit, service panels, breakers, contractors, relays, timers and other associated controls., • EMT Conduit bending and installation, connecting circuits and breakers, replacing fuses and fuse boxes, installing receptacles, switches, light fixtures and testing voltages. Motor and control skills and pump systems., • Operates a variety of standard power tools, equipment and trenchers in electrical installations, maintenance and repair activities on a regular basis., • Repair and maintain lightning protection systems., • Maintains records and logs as needed., • Provides maintenance schedule and material/parts research, parts ordering and shop stock inventory to support routine maintenance and equipment replacement as required. Qualifications: • Completed Secondary Education, • Completed vocational school with Electrical Certification, • Experience with commercial electrical work.

We have an exciting new opportunity for a Tile Mechanic in Portsmouth Virginia! Qualifications: Must be able to obtain DBIDS Have experience with Ceramic or Composite tile installation, masonry, or hardscape installation Ability to identify and measure material.

Outside Machinist Outside Machinists (MO) General Marine Machinist (TSD MB): All work performed in connection with the removal, repair, overhaul and installation of ship's mechanical/ hydraulic equipment Outside Machinists (MO) Sail, Mast & Periscopes Machinists (TSD MK): All work performed in con

Job Description HVAC Controls Electrician/Installer SUMMARY: ACES is offering immediate full-time positions for self-motivated and experienced electricians to join our growing installation team. This role involves all aspects of the installation process for building automation systems. POSITION TYPE: Full-Time, overtime may be required based on project needs REPORTS TO: BAS Installation Manager ESSENTIAL FUNCTIONS AND RESPONSIBILITIES INCLUDE THE FOLLOWING: • Read jobsite drawings (Architectural, Mechanical, Electrical, Plumbing) to understand proper installation areas and requirements, • Install and terminate low voltage cable, • Bend and install conduit consisting of EMT, Ridgid, and PVC, • Install panels to walls and HVAC equipment, • Install field devices such as sensors, thermostats, and damper actuators for HVAC equipment, • Install DDC controllers in panels, • Read ACES generated wiring drawings to understand how to wire equipment, • Willingness to learn and grow in the organization and support the team., • Utilize various hand tools and equipment and maintain tools and equipment for proper functionality., • Some travel with occasional overnight stays. (10%), • Flexibility to work outside normal work hours/weekends, as required. This position has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • High school diploma or equivalent and a minimum of 2 years of experience in the electrician field. HVAC experience is a plus., • Electricians License strongly preferred., • Must possess a clean driving record and be able to pass a routine background check., • Working knowledge of Microsoft Office products., • Computer experience is required., • Familiarity with the concepts of new construction., • Ability to work independently and unsupervised. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, use hands to finger, handle, or feel; reach with hands and arms, and talk or hear. The employee is frequently required to stand and walk. The employee must occasionally stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position requires working at construction sites, in mechanical/equipment rooms and possible extreme weather conditions. While performing the duties of this job, the employee may be exposed to moving mechanical parts and heavy equipment. The employee may be exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; risk of electrical shock (high voltage); and vibration. The noise level in the work environment varies. DECLARATION: Human Resources retains the sole right and discretion to make changes to this job description. Any employee making changes unauthorized by the Vice President or Human Resources will be subject to disciplinary action up to and including termination.

Job DescriptionAcrylic Bath Installer Installation position available immediately! If you have installed bathrooms for any remodeling company and are looking for a new opportunity, please apply. We are one of the fastest growing bathroom remodeling organizations in North America. Creating a fresh solution to bath remodeling, we offer a stylish, cost-effective, low-maintenance bath improvement to homeowners, commercial customers and consumers with accessibility needs. We were created to meet the needs of consumers who were dissatisfied with the quality and workmanship available in the marketplace. Standing behind our products, we have developed an unrivaled reputation for quality and workmanship as a manufacturer of acrylic bath and shower solutions and has extended that level of quality into all our products. The leader in acrylic bath systems, Bath Source of Chesapeake, VA is looking for an Acrylic Bath/Shower Installer to work in the Tidewater area. An ideal candidate will be able to install a high volume of work year-round. Experience with one the following is a plus: • Carpentry, • Ceramic tile, • Floor coverings, • Light plumbing, • General remodelingBenefits Include:, • Medical, Dental, Vision Insurance, • 401(k) YHg4OxYdSl

Job Description Here at Global - a 1st Flagship Company (), a woman-owned small business, we are committed to Individual Accountability, Growth, Integrity, and Respect. As a leader in Marine Support Services and Emergency Management, we have proudly supported the Department of the Navy since 1964, managing, operating, and maintaining the U.S. Navy fleet in locations such as Philadelphia, Bremerton, California, and Hawaii. We are currently seeking skilled Marine Electricians for a potential 5-year project in Norfolk, VA. This opportunity involves hands-on labor working at the Norfolk Naval Shipyard, offering a dynamic and fast-paced environment for experienced professionals. Note: This position is contingent upon contract award. Employment will begin only if and when the company secures the government contract associated with this role. Overview: • Install and repair wiring, panels, and controls., • Test and troubleshoot electrical systems with meters and analyzers, • Interpret blueprints, schematics, and technical manuals., • Active DoD Secret clearance required., • High school diploma/GED; completion of a formal trade training program (trade school, military training, apprenticeship, or equivalent) required., • 4+ years as an electrician with at least 2+ years on Navy ships, • Knowledge of NFPA 70E and shipyard electrical standards. Global- a 1st Flagship Company is an E-Verify and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, gender expression, age, status as a protected veteran, or status as a qualified individual with disability. As a federal contractor all employment offers are contingent on passing a pre-employment background check and drug screen. Job Posted by ApplicantPro

Job Description Duties and Responsibilities • Advanced understanding of and ability to accomplish, • NAVSEA Standard Item (NSI) 009-73 requirements, • Inspection, testing, installation, removal, and repair of shipboard electrical cabling and electronic equipment, • Cable installations include banding, boxes, connectors, equipment, penetrations, cableway, hangers, and associated components, • MCT, MCP, Stuffing Tube opening, packing, closing, and testing, • Bonding and Grounding of Electrical Equipment, • NSI 009-25 requirements, • EIMB, EPISM and Electrical MIL standards, • Electrical troubleshooting, use of multimeters, megohmmeters and network testers, • Initiate Tagout/ Work Authorization Forms (WAF), • Interpret and breakdown work scope from drawings (arrangement, block-wiring, isometric, cable routing, power, lighting, and IC system removal/installation), • Electrically install Manual Bus Transfers (MBT), Automatic Bus Transfers (ABT), Switchboards, and Transformers, • Electrical Fit up – use of grinders, reciprocating saws, drills, • Lead small electrical teams in the execution of an electrical work item or ship alteration, • Track and report job physical progress and budget performance to your supervisor, • Required to have personal tools to include but not limited to, • Multimeter, • Hand tools, • Hardwire termination tools (Insulated and Non-Insulated Ratcheting Crimpers, etc.), • Perform all work in accordance with the established policies and procedures detailed in the Waveforce Electrical Safety Manual Experience Requirements • Three (3) years direct experience in shipboard electrical installation and repair services, • High School Diploma or Equivalent, • Must be at least 18 years of age, • NSI 009-73 Qualified Connector Fabrication Certification (preferred), • NSI 009-123 Qualified Fiber Optic Handling (preferred), • Must be able to pass Waveforce Electrical pre-employment drug and background screening., • Must be able to obtain government facility and/or shipyard access, to include a DBIDS credential, as required by work locations, • Must successfully complete OSHA 10 Hour Training, Virginia Ship Repair Association (VSRA) Safety Orientation and all required Environmental, Health and Safety orientation training after initial employment, but prior to shipboard work, • Ability to work overtime, as required 6vlnp2Cykc

Job Description Duties and Responsibilities • Expert understanding of and ability to accomplish, • NAVSEA Standard Item (NSI) 009-73 requirements, • Inspection, testing, installation, removal, and repair of shipboard electrical cabling and electronic equipment, • Cable installations include banding, boxes, connectors, equipment, penetrations, cableway, hangers, and associated components, • MCT, MCP, Stuffing Tube opening, packing, closing, and testing, • Bonding and Grounding of Electrical Equipment, • NSI 009-25 requirements, • EIMB, EPISM and Electrical MIL standards, • Electrical troubleshooting, use of multimeters, megohmmeters and network testers, • Create, finalize and submit Work Authorization Forms (WAF) along with developing and tracking WAF Logs and tagouts, • Create, finalize, submit and track Conditions Found Reports (CFR), as required, • Interpret and breakdown work scope from blueprints and drawings (arrangement, block-wiring, isometric, cable routing, power, lighting, and IC system removal/installation)., • Electrically install Manual Bus Transfers (MBT), Automatic Bus Transfers (ABT), Switchboards, and Transformers, • Electrical Fit up – use of grinders, reciprocating saws, drills., • Lead multiple electrical teams in the execution of multiple electrical work items or ship alterations., • Track and report job physical progress and budgets to Shipboard Supervisor and/or Project Manager, • Required to have personal tools to include but not limited to, • Multimeter, • Hand tools, • Hardwire termination tools (Insulated and Non-Insulated Ratcheting Crimpers, etc.), • Perform all work in accordance with the established policies and procedures detailed in the Waveforce Electrical Safety Manual, • Capability to work on ships, barges and submarines, • Five (5) years direct experience in shipboard electrical installation and repair services, • High School Diploma or Equivalent, • Must be at least 18 years of age, • NSI 009-73 Qualified Connector Fabrication Certification (preferred), • NSI 009-123 Qualified Fiber Optic Handling (preferred), • Must be able to pass Waveforce Electrical pre-employment drug and background screening., • Must be able to obtain government facility and/or shipyard access, to include a DBIDS credential, as required by work locations, • Must successfully complete OSHA 10 Hour Training, Virginia Ship Repair Association (VSRA) Safety Orientation and all required Environmental, Health and Safety orientation training after initial employment, but prior to shipboard work, • Ability to work overtime, as required e97oad5qOa

Job Description ITAC serves Process & Industrial clients with integrated engineering and construction services for complex capital projects. We also offer specialty services including power systems services and products, custom machine fabrication, and fall protection services and equipment. Founded in 1988 on a dream and a $5K loan, ITAC is a true success story. From humble beginnings to an ENR-Ranked Top Design Firm with a nationwide footprint and over 500 employees operating from 6 offices in Virginia, North Carolina and South Carolina, we provide Fortune 500 companies with innovative design-build solutions. We specialize in power generation & utilities, chemicals, food & beverage, forest products, advanced manufacturing, and minerals & metals. ITAC’s purpose is to make life better. For our employees, this means providing them with the resources and flexibility they need to have both a rewarding career and a fulfilling family life. ITAC is 100% employee-owned. Through our Employee Stock Ownership Plan (ESOP) and Direct Stock Ownership, every team member has the unique opportunity to be an owner who shares in the company’s growth and earnings. We offer our team a comprehensive benefits package and numerous employee incentives. Rooted in love, we serve and care for our employees like family. We hire passionate and motivated people with an innovative mindset and the desire to grow. If the thought of challenging, fast-paced projects excites you, then you’ve come to the right place. At ITAC, you’ll be part of a collaborative team that works hard to make life better. For more information, visit itac.us.com. Responsibilities • Lead and supervise a team of electrical technicians and subcontractors on industrial construction projects., • Plan and coordinate all electrical activities, ensuring adherence to project specifications, codes, and safety standards., • Oversee the installation, testing, and maintenance of electrical systems, equipment, and components., • Collaborate with project managers to develop and implement project schedules and budgets., • Conduct regular inspections to ensure quality control and compliance with design specifications., • Troubleshoot and resolve electrical issues, providing technical expertise and guidance to the team., • Maintain accurate project documentation, including progress reports, daily logs, and change orders. Pay Range: $37-$42 per hour with overtime opportunities. (Based on experience) Requirements • Minimum of 1-2 years of experience as an Electrical Foreman in an industrial construction setting., • Thorough understanding of electrical systems, wiring methods, and safety protocols., • Expertise in reading and interpreting electrical schematics, blueprints, and technical drawings., • Strong leadership and communication skills, with the ability to effectively manage and motivate a team., • Proficiency in using electrical tools and equipment, including meters, testing devices, and power tools., • Knowledge of electrical codes and regulations, with a commitment to ensuring compliance., • Excellent problem-solving abilities and a proactive approach to identifying and resolving issues., • Valid driver's license and the ability to travel to project sites as needed. From internships to seasoned professionals, our growing company provides career opportunities for all levels of experience. We offer our team a comprehensive benefits package and numerous employee incentives. For life’s challenges, we also provide our employees and their immediate families with certified chaplains for around-the-clock encouragement and support. Rooted in love, we serve and care for our employees like family. ITAC provides benefits such as: • Health, Vision, and Dental Insurance, • 401k & ESOP, • Life Insurance, • Short & Long-Term Disability, • Paid Time Off, • Paid Holidays, • Paid Parental Leave, • Bereavement Leave, • Employee Assistance Program, • Wellness Program, • Mentorship Program, • Safety Incentive Program, • 24/7 Chaplain Care

Job Description We are seeking an experienced Project Manager with a strong background in bridge construction and heavy civil infrastructure. This individual will oversee the planning, coordination, and execution of bridge and highway projects, ensuring compliance with project specifications, schedules, and budgets. Key Responsibilities: * Lead and manage bridge and heavy civil construction projects from pre-construction through closeout * Develop and maintain project schedules, budgets, and cost control procedures * Coordinate with project teams, subcontractors, and clients to ensure efficient communication and execution * Oversee contract administration and change order management * Ensure compliance with safety and environmental standards * Provide leadership and direction to field personnel and subcontractors * Work closely with DOT and public agency stakeholders to maintain project alignment and quality Qualifications: * Bachelor’s degree in Civil Engineering, Construction Management, or related field (preferred) * Minimum 5–10+ years of experience in heavy civil and bridge project management * Proven track record delivering VDOT or DOT-related infrastructure projects * Strong knowledge of construction contracts (VDOT specs preferred), scheduling software (Primavera P6 or MS Project), and cost tracking tools * Excellent communication, organizational, and leadership skills Curtis Contracting, Inc. (CCI) is a class 'A' contractor prequalified with VDOT and has been in business since 1985. We are separated into multiple divisions including the Civil division, Heavy Highway division, Road/Bridge Maintenance division, and Federal division. CCI has a large equipment fleet and self performs all aspects of construction management, site work, utilities, demolition, heavy highway, and cast-in-place concrete. Curtis Contracting, Inc. was founded on the principles of ethics, partnering, quality, integrity, safety and environmental stewardship. These principles and hard work are carried out through our leadership team. CCI has a large equipment fleet and self performs all aspects of construction management, site work, utilities, demolition, heavy highway, cast-in-place concrete, installation of divisions 8 & 10 items, and erection of pre-engineered metal structures. We hope you join our team!

Job Description HUTCO, INC. Position: Maintenance Electrician Job Location: Norfolk, VA Shift: ALL (0600 – 1445 to start; possible night shift) Security Clearance: No Clearance Required Rate of Pay: $26.00 per hour (No per diem available) DESCRIPTION: Hutco, Inc. is seeking a skilled Maintenance Electrician for our Facilities department in Norfolk, VA. The Maintenance Electrician will be responsible for performing installation, repairs, and maintenance according to diagrams, schematics, and national electrical codes. The role requires experience in both commercial and residential electrical work and involves working in various environments, including shipboard spaces. Commercial industrial experience is a must; holding a journeyman card is a plus. RESPONSIBILITIES: • Installation, repair, and maintenance based on electrical diagrams, drawings, schematics, and codes., • Perform commercial and residential electrical tasks, including controller installation and repairs., • Plan installations, including drawing up material lists., • Carrying, Lifting, Walking, Climbing, Pulling: Required regularly, with frequent handling of tools and parts weighing up to 50 lbs., • Crawling, Sitting, Crouching, Standing, Kneeling, Stooping: Tasks involve various physical postures and extended periods of standing and walking (75% of the time)., • Hearing and Talking: Essential for communication and safety on the job site., • Must be able to navigate ships, climb ladders, work at heights, and walk on scaffolding., • Exposure to varied temperatures, humidity, wind, wet conditions, fumes, odors, dust, vibrations, and potential toxic chemicals. JOURNEYPERSON 4: • Must be able to work in tight, confined spaces on board ships., • Exposure to industrial conditions such as machinery vibrations, wet/humid environments, and potential exposure to caustic chemicals. CONTACT HUTCO TODAY! Apply Online or at the Portsmouth Branch: Address: 728 High Street Suite 200 Portsmouth, VA 23704 Send resumes to: Or call us at: (757) 223-7680 Hutco, Inc. is an Equal Opportunity Employer (EOE).

Job DescriptionSalary: Summary of Duties The Fabrication Material Controller I plays a vital role in managing and supervising the physical inventory of materials, including Government Furnished Material, shop supplies, and office supplies. This involves processing items through the purchasing program and handling the staging and stocking of material based on task requirements and approved documentation. The role includes maintaining an orderly inventory system and issuing material to designated personnel. Additionally, this position supports Fabrication Shop Management by performing administrative tasks such as data entry, organizing and filing documents, handling correspondence, and other clerical responsibilities. The Fabrication Material Controller I uses computer systems to work with spreadsheets and databases, create reports, and develop various business-related documents. This role occasionally requires lifting and moving equipment weighing up to 50 pounds. Specific Description of Duties - Receives and inspects incoming materials, equipment, and supplies for accuracy and initial condition. Organizes the issuing, receiving, and delivery of materials to customers. Maintains a neat, orderly workspace environment. Verifies shipments against purchase orders to identify errors or omissions. Assists with physical inventory checks, research, and reporting discrepancies. Coordinates with Fabrication Shop Management, Supply Chain, vendors, and customers to resolve issues related to defective or unacceptable items. Applies knowledge of government, commercial, and international receiving procedures in accordance with FAR/DFAR and Prism Maritime LLC policies. Prepare reports. Supports creation and setup of monthly progress updates, briefings. Attends meetings and records minutes related to Fabrication Shop decisions. Performs tasks in alignment with company policies and procedures. Works overtime when required. Carries out additional assignments as directed to support the organizations mission and goals. Education / Specialized Training HS diploma or GED is required. 3 years knowledge and skills regarding inventory processing and control. 2 years Deltek / Costpoint and SharePoint experience. Proficient in Microsoft Office Suite. Data entry. Technical Writing. Material and Government Furnished Material. Strong written and verbal communication skills, well-developed. Interpersonal skills. Experience in maintaining stock. Possess or have ability to obtain forklift certification. Security Clearance Clearance up to secret level may be required. US Citizenship required. Physical / Environmental Job Requirements Physical requirements include the following: Lifting/moving up to and including 50 pounds In performing these duties, you may be required to work outdoors. You will experience temperature variations, extremely loud noises and other physical hazards. Company Overview: Prism Maritime, LLC is a premier maritime service provider for Alteration Installation Team (AIT) and Modernization related Services in support of US Maritime and Shore-based clients. Prism Maritime is a privately held business headquartered in Chesapeake, VA, with offices in San Diego and Ventura, CA. Established in 2006, Prism Maritime currently employs over 350 professionals and maintains an ISO 9001-2015 certified Quality Management System. Prism Maritime is an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, sex, national origin, ethnic origin, physical or mental disability, veteran status, age, or any other characteristic protected by federal, state, or local laws. U.S. citizenship is required for most positions. If you need special assistance or an accommodation while seeking employment with us, please email or call: 757-460-8800. To Apply: Visit click on Careers>Job Openings All applications are active for 90 calendar days. After 90 days you must re-apply to still be considered for this position.

Job DescriptionShipboard SupervisorHourly Non-Exempt PositionLocationNorfolk, VAAbout UsWaveforce Electrical is a small but growing business specializing in electrical / electronic ship repair, maintenance and modernization serving private and public shipyards and primarily Government customers. We are dedicated to delivering top-quality services to our clients, ensuring their vessels are maintained to the highest standards. Our team is composed of skilled professionals who are passionate about maritime services and committed to excellence. Position OverviewThe Shipboard Supervisor will be responsible for overseeing all technical, schedule, and the shipboard work force associated with assigned ship repair projects. This role requires a detail-oriented and strategic individual who can manage ship repair projects while maintaining compliance with technical, safety and quality standards. The Shipboard Supervisor will work closely with other Shipboard Supervisors and Project Managers to monitor and report progress status. Duties and Responsibilities • Supervise electrical/electronic trades personnel appropriate to size of projects, • Monitor and track project and operational goals to include established objectives relating to technical progress, schedule, quality, safety or other objectives, • Identify out-of-scope work and notify the project management team for program changes, • Write required and / or otherwise necessary conditions found reports (CFRs), track and bring to conclusion, • Interface with prime contractor customers, • Ensure safety and quality procedures are in compliance with local requirements and are followed, • Ensure company policies are followed by all personnel under your supervision, • Ensure compliance with customer contracts, federal, state and local laws and regulations, • Ensure compliance with EIMB, EPISM and Electrical MIL standards as applicable Experience Requirements, • Five (5) years' experience in management of shipboard electrical installation and repair services, • Understanding of NAVSEA Standard Items, ABS and other industry related guidelines as applicable to various programs, • Understanding of EIMB, EPISM and Electrical MIL standards, • High School Diploma or Equivalent, • Must be at least 18 years of age, • Must be a U.S. CitizenOther Requirements, • Must be able to pass Waveforce Electrical pre-employment drug and background screening., • Must be able to obtain government facility and/or shipyard access, to include a DBIDS credential, as required by work locations, • Ability to travel if required (estimated travel <25%)Benefits, • Competitive salary, • Comprehensive health, dental, vision and other insurance., • Retirement savings plan, • Paid time off and holidays. RdVk0RuaMj

Job Description AMP is applying AI-powered sortation at scale to modernize the world's recycling infrastructure and maximize the value in waste. AMP gives waste and recycling leaders the power to harness AI to reduce labor costs, increase resource recovery, and deliver more reliable operations. With hundreds of deployments across North America, Asia, and Europe, AMP's technology offers a transformational solution to waste sortation and changes the fundamental economics of recycling. Headquartered in Louisville, Colorado, the Denver Post and BuiltIn Colorado have recognized AMP as one of the state's top workplaces. AMP has operations and career opportunities outside of Atlanta, Cleveland, Portsmouth, Virginia, and Europe. We're fostering an environment where passionate individuals can grow and create impact. We seek unconventional thinkers to join our mission to enable a world without waste; at AMP, your contributions have meaning and can spur change. With backing from top-tier investors and national recognition including North American Cleantech Company of the Year, we're always seeking ways to better our operations, raising the bar on innovation, and looking to collaborate and improve in what we do. Learn more at AMPSortation.com. AMP is hiring a Chief Operating Officer (COO) reporting to the Chief Executive Officer. This person can be remote in the contiguous United States. As the COO you will work to: • Direct the operations of AMP's Material Recovery Facilities (MRFs) to ensure optimal performance, safety and efficiency with full P&L responsibility., • Lead and oversee all operations and manufacturing functions, including health and safety, manufacturing engineering, production, installation, field service, and quality assurance., • Build, lead, and develop a high-performing team of direct, hourly-labor, fostering a culture of accountability, innovation, and continuous improvement., • Establish and monitor strategic goals for operational efficiency, productivity, and quality., • Develop and implement best-practice operational systems, processes, and procedures to improve business performance and scalability., • Collaborate with the Executive Leadership Team to develop and execute company strategy, ensuring alignment with operational goals., • Foster strong relationships with department heads, external partners, vendors, and enterprise clients to support operational and strategic objectives., • Monitor and analyze key operational metrics to ensure timely, high-quality execution of projects and initiatives., • 15+ years of experience running multiple material recovery facility (MRF) operations., • Management experience across design, construction and project management of new material recovery facilities (MRFs), • Ability to lead, grow, develop and inspire a team setting clear goals and drive performance at all levels in the organization., • Develop and execute strategies that align with overall business objectives., • Excellent interpersonal skills to build and maintain strong relationships with enterprise clients, key stakeholders and internal teams. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift up to 15 pounds at times., • Ability to travel often to AMP's facilities, customers and prospects and to AMP headquarters in Colorado Applicants who identify with a historically underrepresented group are encouraged to apply. Equal employment opportunity will be extended to all persons in all aspects of the employer-employee relationship, including recruitment, hiring, upgrading, training, promotion, transfer, compensation, benefits, discipline, layoff, recall, and termination. Other duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description We are seeking a highly skilled and experienced Program Manager to join our team. In this role, you will be accountable for the cost, quality, schedule, and performance of the LCS lifecycle project utilizing Defense Maritime Solutions Project Management (PM) methodology and ensuring the successful execution of projects from contract award to warranty closure. This position requires experience in government shipyard construction and operations, marine engineering, and a working knowledge of government contracts. Responsibilities: • Embrace and promote a culture of DMS Enthusiast. Coordinate and collaborate effectively with other DMS company members through positive engagement and mutual respect. Hold colleagues accountable to this company-wide standard for interpersonal relationships, • Coordinate closely with Engineering to resolve project-related technical issues and incorporate lessons learned., • Coordinate closely with the Field Service Team to ensure the project plan, history, all required tooling, and all other support needs are clearly identified and communicated., • Maintain appropriate interface and relations with customers, paying detailed attention to contracts and specifications to minimize risk exposure to both DMS and its customers., • Liaison between facility repair, engineering team, and subcontractors to ensure the project is executed on time and within the budgeted scope of work., • Lead Project Team and manage all aspects of project-specific engineering, equipment deliveries, installation, and commissioning., • Serve as primary project point of contact to the customer from contract award through the end of warranty, • Ensure cost control at or below budget and quality objectives are met relative to project management activities, • Ensure delivered products meet customer requirements (including military standards/specifications) as prescribed per order, • Effectively craft and document execution and lifecycle support plans for existing business opportunities to ensure sustainable execution success of all orders captured. Ensure effective turnover and communication of plans for all orders., • Ensure export compliance policies and requirements are clearly understood and followed by department personnel., • Accountable for cost, quality, schedule, and performance of each project scope in the project., • Accountable for managing projects in accordance with the Wartsila PM method and DMS procedures, • Ensure that all project documentation is in order and completed as required by contract and internal processes., • Program Management, • Project Communications Management, • Project Cost Management, • Project Procurement Management, • Project Quality Management, • Project Risk Management, • Project Scope Management, • Project Time Management, • Project Customer Relation Management, • Project Planning and its Documentation, • Document Management, • Cost Indexes and Cost Development, • Management of Project-Specific Organization, • Understanding of contracts or project governance, • Project Management certificate, • HS/GED, Trade School, or Military plus a minimum of 5 years in a related industry., • B. S. in Mechanical/Marine Engineering preferred., • PMP Certification preferred, • Familiar with marine engineering and shipboard equipment and systems., • Familiar with diagrams, blueprints, drawings, test procedures, and technical manuals., • Familiar LCS Independence Class propulsion shafting, • Familiar with direct government contracts, • Ability to read and interpret engineering drawings, • Multitasking, • Knowledge and skill in using computer software, including Excel, MS Word and PowerPoint, • Interpersonal, presentation, and communication skills, • Proficient in self-directed research/study of technical and programmatic information, • Excellent at problem-solving., • Excellent in reporting executive-level status of programmatic issues American With Disabilities Specifications – General Requirements of Employment Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb stairs; balance, stoop, kneel, crouch or crawl, talk or hear, taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities may be required by the job to include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee may be exposed to weather conditions. The noise level in the work environment is usually moderate.

Job Description EPC Services Company, a leading power/utility engineering consultant and construction firm, has an immediate opening for a full-time Warranty & Commissioning Construction Manager. This position is a traveling Construction Manager role for individuals with strong knowledge of the means and methods used in the construction of electrical substations, transmission lines, and renewable energy (solar and wind) collection systems. A Warranty & Commissioning Construction Manager (CM) may fill in as a Construction Manager at times and provide direct supervision of all subcontractor's activities and material receiving on the projects. The position of Warranty & Commissioning CM is an essential role in the organization. The CM is available on a 24-hour basis to respond to emergencies that may be covered under warranty. The CM is responsible for troubleshooting inquiries for client claims, field response and repairs as well as all aspects of the commissioning activities including client training and relationships for EPC Services projects across the U.S. This position requires a minimum of 80% travel. Its functions include 1:1 and/or collaborative client discussion of problems, resolution, and timing of repairs. Additional work may include field support of electrical apparatus testing, setting, and testing protective relays and functional verification of control, protection, and alarm circuits. The position will work with project managers to advise on safety, quality control/quality assurance, on-site reporting, environmental compliance inspections, and training as required. This position reports directly to the Project Manager for all project specific issues and reports to the Manager of Warranty & Commissioning for assignment to the projects, for general installation practices, and inspection processes. Minimum Requirements: High school diploma or equivalent; switching certification; a minimum of 5 years' experience in transmission line and/or substation construction; understand all safety requirements and best practices to ensure that our employees and out subcontractors are always operating in a safe manner; capable of reading and understanding technical documentation and equipment manuals; familiar with IEEE standards, procedures, and guides; excellent organizational skills; strong written and verbal communication skills; working knowledge of a variety of computer applications including Microsoft Office (Word, Excel, PowerPoint, and Access), Vista ERP software knowledge a bonus; driving (ability to be insured to drive company vehicles). The successful applicant will be subject to client-mandated drug and background checking and is subject to EPC Services Company's auto insurance carrier requirements. Applicants must not require sponsorship for employment visa status (e.g., H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include: • Medical, dental and vision insurance, • Flexible spending account, • Health savings account, • Life insurance, • Disability insurance, • 401(k), Profit Sharing and Employee Stock Ownership Plan, • Paid vacation, personal days, and holidays, • Paid Parental Leave An Equal Opportunity Employer Job Posted by ApplicantPro

Job Description We are seeking freelancers/consultants for on-demand/ad hoc IT Support in the Norfolk, VA to join our team! As a team member, you will assist our clients with resolving a range of computer-related issues and/or provide on-site support as needed. Responsibilities: • Installation of workstations., • End-user support for executives, office personnel, and other key business stakeholders; this could include installation and configuration of hardware and software applications, as well as some security functions such as password resets, etc., • Experience with copying/restoring end user data files, migrating Windows 7 to Windows 10 utilizing tools such as Azure, SCCM, PXE boot, etc., • Basic networking, rack/stack/patch, remote hands support, etc., • Experience working with AD (active directory), domains, group policy, etc., • E-mail, A/V conferencing, VoIP device replace and configuration., • Support of enterprise solutions including Microsoft Office365, Exchange email, Anti-Virus software, etc., • Provide timely and efficient executive-level support., • 5+ years support experience in an enterprise environment using Windows and some Apple/Mac hardware., • Application support for Microsoft Office365, SharePoint Online and Exchange Online., • Working knowledge of Azure, Intune, and other cloud based services., • Operating Systems: Windows Server, Mac OS X (Server/Workgroup Manager), iOS and Windows 7 through 10., • Xerox, Canon, HP printer installation, local/network configuration and print management., • Excellent verbal and written communication skills., • Ability to effectively operate independently as well as in a team environment., • Flexible work schedule! Hours/Shifts are on-demand - we'll work with your schedule & availability!, • Competitive compensation and 2hrs. minimum pay on all assignments. Company DescriptionTechmate is a pioneering On-Demand, Technical Support Platform built for the distributed workforce. Our clients are some of the largest professional service firms, manufacturing, real estate and related brick and mortar companies who have nationwide and global office locations.Techmate is a pioneering On-Demand, Technical Support Platform built for the distributed workforce. Our clients are some of the largest professional service firms, manufacturing, real estate and related brick and mortar companies who have nationwide and global office locations.

Job DescriptionSummary GAMA-1 Technologies, LLC seeks a detail-oriented and motivated Junior System Administrator to support the administration, maintenance, and monitoring of IT systems and infrastructure in a remote environment. The Junior System Administrator will assist with the installation, configuration, troubleshooting, and documentation of systems under the supervision of senior administrators, ensuring compliance with federal cybersecurity and operational standards. This is an entry-level position designed for individuals beginning their IT careers. The role offers exposure to enterprise IT operations, cybersecurity compliance, and system administration in a mission-driven federal setting. Supervisory Responsibilities – None Essential functions/responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Assist in the setup, configuration, and maintenance of Windows and Linux servers, applications, and related components., • Support user account creation, permissions, and access management within Active Directory and other directory services., • Monitor system performance, availability, and capacity using standard tools and dashboards., • Perform routine updates, patch management, and basic system maintenance tasks in accordance with agency security requirements., • Help maintain system documentation, configuration records, and asset inventories., • Provide support for end users, escalating complex issues as needed., • Assist with backup, recovery, and disaster recovery (DR) procedures under supervision., • Participate in security scans and compliance checks, ensuring adherence to federal and organizational policies., • Collaborate with network, security, and cloud teams on technical support and system improvement initiatives., • Contribute to the development and refinement of standard operating procedures (SOPs)., • Respond and document cloud application issues escalated by Tier 1 resources or captured by cloud monitoring tools., • Off-Hours Support: Participate in on-call rotation for after-hours or weekend support., • Continuously monitor cloud activity, usage, performance, cost, and security using cloud monitoring tools and technology., • Triage, troubleshoot, and resolve application performance issues, escalating as needed to resolve more complex issues.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Information Security and Confidentiality Obligations • Bachelor’s degree in Computer Science, Information Systems, or related field (or equivalent experience)., • 0-2 years of experience in in IT support, help desk operations, or system administration., • Foundational knowledge of Windows Server, Linux systems, and networking fundamentals., • Basic understanding of federal IT compliance and security frameworks., • Strong problem-solving skills and ability to follow technical procedures accurately., • Excellent communication, documentation, and customer service skills., • Understanding of networking protocols, LAN networking, and WAN networking., • Ability to evaluate networks and systems to make sure that they perform reliably and to anticipate new requirements as organizations’ needs change., • Internship or academic experience supporting federal or enterprise IT systems., • Entry-level certifications such as CompTIA A+, Network+, or Security+, Microsoft Certified: Azure Fundamentals (AZ-900), AWS Certified Cloud Practitioner, Linux Essentials or Red Hat Certified System Administrator (RHCSA)., • Prolonged periods of sitting at a desk and working on a computer. Proficiency Requirement ABOUT GAMA-1 GAMA-1 is a rapidly growing technology business that is based in Greenbelt, Maryland. GAMA-1 Technologies provides strategic information assurance, information security, and business enterprise and networking solutions to the Federal Government. Our success is based on the utilization of industry and agency standards, establishment of standardized processes, and IT Services expertise. At GAMA-1, we believe employees should grow, achieve, and develop just as the company grows, achieves, and develops. GAMA-1 is committed to providing our employees with opportunities for career advancement throughout their employment. For more information, visit GAMA-1 is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to: veteran status, uniformed servicemember status, race, color, religion, sex, sexual orientation, gender identity, age, pregnancy (including childbirth, lactation and related medical conditions), national origin or ancestry, citizenship or immigration status, physical or mental disability, genetic information (including testing and characteristics), domestic violence victims, political orientation, status as a smoker or tobacco user, hairstyle, use of a service animal, education status, familial status, HIV/AIDS status, height, weight, reproductive healthcare decisions or any other category protected by federal, state or local law. Powered by JazzHR SRW6Vc0i4y

Job Description Note: Position requires local residence in the Norfolk, VA Area to be on-site. Job Summary VSolvit is seeking an IT Customer Support Specialist to provide installation, configuration, testing, and technical support services to the Department of Navy’s Commander, Operational Test and Evaluation Force (COMOPTEVFOR). A Secret Clearance is required to start work in this position. As with any position, additional expectations exist. Some of these are, but are not limited to, adhering to normal working hours, meeting deadlines, following company policies as outlined by the Employee Handbook, communicating regularly with assigned supervisors, and staying focused on the assigned tasks, and completing other tasks as assigned. Responsibilities • Provides technical support to end users for computer, application, system, device, printer,, • access and hardware issues., • Identifies, researches and resolves technical problems of moderate complexity., • Responds to telephone, email and online ticket requests for technical support., • Documents, tracks, and monitors the problem using applicable systems and tools., • May coordinate with other teams or departments to resolve user problems., • Perform hardware and software installations, configurations and updates as needed., • Conducts Windows imaging and cloning of laptops and computers., • Applies Microsoft and other third-party security patches and updates to Windows 10 client workstations., • Provides Video Teleconference (VTC) technical support and assists end users with making VTC calls., • Conducts new user check-ins and check-outs., • Creates and modifies Microsoft Active Directory user accounts., • Will Issue Gov reviewed IT Assets to OPTEVFOR personnel and receive back IT assets for receipt by a Gov/Mil OPTEVFOR member., • Assists new users with completing check-in forms and accessing online training., • Provides a monthly status report which contains the progress of work on assigned tasks and future work plans for the upcoming month., • Other duties as assigned. Basic Qualifications If applicable: If you are or have been recently employed by the U.S. government, a post-employment ethics letter will be required if employment with VSolvit is offered. • Must be a U.S. Citizen, • Minimum of 3 years’ experience with Customer Service Support., • Experience with configuring and maintaining Windows 10/11 workstations., • Experience with installing and supporting Microsoft Office 2019 or higher., • Must have the proper and current cyber security qualifications to perform IT privileged, • administrative functions in accordance with the DoD Cyberspace Workforce Framework (DCWF) and the DoDM 8140.03, CYBERSPACE WORKFORCE QUALIFICATION AND MANAGEMENT PROGRAM., • Must meet the applicable DCWF Work Role [411] Foundation Qualifications, Basic which include:, • Education: Associate degree or higher from an accredited college or university. When used to satisfy the foundational portion of qualification, the degree must be conferred within the past 5 years by an institution of higher education that is accredited by a nationally-recognized accreditor, unless continuous work in the relevant discipline can be demonstrated; OR, • Training: Offerings listed in DoD 8140 Training Repository, • Active Secret security clearance. Other Job Info • While performing the duties of this Job, the employee is regularly required to sit and talk or hear., • The employee is frequently required to walk; use hands to finger, handle, or feel and reach with hands and arms., • The employee is occasionally required to stand; climb or balance and stoop, kneel, crouch, or crawl., • The employee must occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this job include close vision., • The employee will normally work in a temperature-controlled office environment, with frequent exposure to electronic office equipment., • During visits to areas of operations, may be exposed to extreme cold or hot weather conditions and occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and loud noise. Company Summary Join the VSolvit Team! Founded in 2006, VSolvit (pronounced 'We Solve It') is a technology services provider that specializes in cybersecurity, cloud computing, geographic information systems (GIS), business intelligence (BI) systems, data warehousing, engineering services, and custom database and application development. VSolvit is an award winning WOSB, CA CDB, MBE, WBE, and CMMI Level 3 certified company. We offer a customizable health benefits program that best meets the needs of its employees. Offering may include: medical, dental, and vision insurance, life insurance, long and short-term disability and other insurance products, Health Savings Account, Flexible Spending Account, 401K Retirement Plan options, Tuition Reimbursement, and assorted voluntary benefits. Our goal is to grow together and enjoy the work that we do as a team. VSolvit LLC is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Job DescriptionSalary: $83,000 - $99,000 per year Project Design Engineer SCADA Emphasis Renewable Energy Norfolk, VA Folsom, CA The Opportunity Join our Engineering and Design team as a Project Design Engineer with an emphasis on SCADA to work on exciting renewable energy projects across the US. We are growing our team and seeking a skilled engineer for the design and development of systems, panels, components, and equipment (mechanical or electrical) using AutoCAD software. The Team You will report to our Director of Engineering and Design and work in collaboration with a small team of 3-5 engineers. You will also collaborate across the organization with our Systems Integration Engineers, Network Engineers, Project Managers, Production Team, and other stakeholders. The Environment The team works in a flex-based model, based on the option for remote work 2 days/week. Some travel to job sites will be required on occasion. There are two openings for this position, one in our Folsom, CA headquarter office and one in our Norfolk, VA production facility. Growth & Development In this role you will build cross-departmental relationships, elevate your knowledge of solar and renewable energy, and work in collaboration with the brightest minds in renewable technology. Your Key Contributions • Develop project/product designs and drawings, maintain revisions, modify as required and ensure all drawings comply with engineering drawing practices, standards and with applicable client or regulatory guidelines., • Prepare, schedule, coordinate and monitor the assigned engineering projects., • Read, create, and detail line diagrams and schematics for fabrication., • Meet design deadlines and communicate any issues with appropriate parties., • Perform engineering calculations such as UPS and battery bank sizing, fiber optic link losses, enclosure heating and air conditioner sizing., • Evaluate and specify products to meet the technical requirements of the project., • Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications., • Create mark-ups to communicate revisions and corrections with CAD designers., • Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support., • Bachelor's degree in engineering, required., • Minimum of 2-5+ years SCADA-related experience and/or training preferred., • University graduate from an engineering curriculum, • Proficient with AutoCAD 2D, • Understanding of basic AC/DC electrical theory as it relates to design drawing and applicable electrical codes and standards, • Possess excellent verbal and written skills, • Ability to analyze and solve complex problems About Trimark Trimark is an industry leader in the movement towards a greener grid and a cleaner future. We design systems and provide services to enable the integration of large-scale renewable power plants into the power grid. Our products are at the forefront of generating dispatchable power from renewable plants by combining the intermittent renewable resource with energy storage. We manage thousands of renewable energy sites for industry-leading clients and support regulatory and operational compliance solutions for complex systems associated with critical infrastructure electric loads, power generation, water infrastructure and other similar applications. Trimark provides systems and servicesthat power producers, utility providers, and independent load serving entities need to participate in organized electric markets, as well as the information ISOs and Balancing Authorities need to manage the bulk electric grids. Our team designs systems from concept to commissioning, including system and network architecture, software development, component assembly,technology configuration,installation, testing, certification, ongoing support, and maintenance. Benefits • Work-Life Synergy, • Paid Vacation, • Paid Sick Leave, • Paid Holidays, • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Plan, • Flexible Spending Account, • 401K Match, • Student Loan Assistance, • 529 Savings Plan, • Referral Bonus, • Company Paid Life Insurance, • Voluntary Life Insurance, • Long Term Disability Insurance, • Accident Insurance, • Critical Illness Insurance, • Identity Theft Protection, • Legal Insurance, • Pet Discounts, • Employee Assistance Program, • Onsite Gym Access (Folsom office) Legal Notes Equal Opportunity Statement Trimark is committed to compliance with all applicable laws providing equal employment opportunities. This commitment applies to all people involved in Company operations and prohibits unlawful discrimination by any employee of the Company, including supervisors and coworkers. E-Verify Statement Trimark will provide the Social Security Administration, and if necessary, the Department of Homeland Security, with information from each new employees Form I-9 to confirm work authorization. Please note that we do not use this information to pre-screen job applicants. Work Authorization This role is Not Eligible for sponsorship by Trimark, including future sponsorship. Candidates must reside in the United States. Pay Transparency Compensation is based on market rate, job level, job related knowledge, skills, experience, education, and certifications. Candidate Safety Trimark engages in a structured hiring process during which you will meet with multiple team members. We do not issue offers based on email contact and will not ask for your personal or sensitive information prior to an accepted offer. Communications from our talent team will come from the trimarkassoc.com domains. Unsolicited Candidate Referrals Trimark values our strategic partnerships with our agency partners who may supplement our internal recruitment teams efforts from time to time. To submit candidates for consideration, agency partners must have an executed agreement signed by Trimarks president and a job specific requisition. Without such agreements in place, Trimark will not pay a fee to any agency. Unsolicited referrals from any source other than directly from a candidate will be considered Trimark property and will be considered to have been referred by the agency free of any charge or fee. This includes resumes, partial resumes, candidate profiles, and candidate details or information. Trimark engages in a structured hiring process during which you will meet with multiple team members. We do not issue offers based on email contact and will not ask for your personal or sensitive information prior to an accepted offer. Communications from our talent team will come from the trimarkassoc.com domains.

Job DescriptionJOB DESCRIPTION Watershed Security, is a Veteran Owned Small Business with over 20 years Cybersecurity and Government Contracting experience. Watershed is looking for a Navy Program of Record (POR) Technician to install, troubleshoot and operate NAVY POR systems on Military Sealift Command vessels. Work will be onsite in Chesapeake and Norfolk Virginia and will require extensive travel. REQUIRED QUALIFICATIONS • Must have a DoD Secret Clearance, • Work will occur at contractor facilities in Chesapeake Virginia and at Navy facilities in the Norfolk area., • Extensive travel will be required to CONUS and OCONUS locations, • Possess or be able to obtain a US Passport within 1 month of hire, • Must possess an IAT II-level security certification as outlined in DoD 8570.01-M, • Must have at least 7 years of progressive IT experience, with recent POR experience within the past 3 years, • Must possess Subject Matter Expert-level knowledge and/or skill set in building, deploying, and/or providing tier 2/3 support in at least one of the following systems: CANEs, ADNS, COMPOSE 4.0.x, GCCS 4.1.1.2, CENTRIXS Block 0/1/2, and/or CND systems, • Must possess knowledge and/or skill set in some or all of the following areas: enterprise-level tier 2/3 computer network support, server virtualization software (VMWare or Microsoft Hyper-V) usage, workstation image deployment, Microsoft Active Directory user and group administration, TMG, IAV patching, CTO/EXORD/OPORD implementation, HBSS configuration, WSUS configuration, Naval Fleet NOC engagementDESIRED QUALIFICATIONS, • Experience managing small teams to coordinate the installation and maintenance of Navy IT systems in accordance with established policies and procedures, • Should be able to lift items of 50lbs or less and be able to navigate uneven work surfaces in the environment, • Must be able to efficiently communicate with senior leadership on the status of activities being performed Final salary is influenced by factors such as location, contract labor categories, experience, skills, education, and certifications. Watershed offers competitive compensation, medical and dental benefits, educational reimbursement, 401K plans with matching, 15 days of PTO to start and 11 paid holidays per year. The proposed salary range for this position is: $80,000 - $102,000 USD Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Powered by JazzHR IMq3Vmx0cD

Job Description The Opportunity We are seeking a talented Commercial Account Executive with minimum 2+ years’ sales experience to add to our Birmingham, AL division. Under minimal direction, this outside sales role is responsible for the sale of commercial and industrial HVAC equipment and systems to owners, engineers, architects, contractors and consultants. You will build and manage long-term relationships with your customers, accounts and the manufacturers. Responsibilities • Demonstrate technical expertise to develop credibility, loyalty, trust and commitment., • Determine project needs, constraints, and responsibilities to meet the customer’s HVAC system design and installation requirements., • Effectively write, present and communicate bids. Negotiates value and closes the sale., • Positively and credibly influence system design and solutions with customers. Frequently create competitive, high quality and timely estimates, bids, proposals, and cost/benefit analysis., • Manage multiple, ongoing, projects particularly focusing on selling HVAC equipment, service and systems., • Build partnering relationships with customers and manufacturers contractors. Understand the customer's business and speak their language., • Responsible for supporting and assisting in the Accounts Receivable collection processes., • Solicit support from and communicates effectively with the entire sales team and inside sales supports staff., • Assist in the development of the sales team., • Keep management informed of progress and account status. Knows when to call for assistance from upper management to keep the sales process moving., • Influence project designs & specifications and drawings in order to obtain the Basis of Design (BOD), or a better advantage of being awarded the project on Bid Day with participating contractors., • Proficient in industry wide and manufacturer-specific software to be better able to assist Design Engineers., • Log & Follow Basis of Design projects in process within BOD tracking system for various manufacturers., • Assist with communication to Design Engineers regarding forecasted shipping updates and how they could possibly affect project timelines., • Forward written technical Specifications & Product Warranty documents to Design Engineers., • Communicate the status of projects to management and any Engineering layout concerns for resolution as required., • Manage the receipt of Installation, Operation and Maintenance manuals (IOM) and distribute to our internal Project Managers as required., • Assist with the Distribution to and approved receipt back of Engineering Submittals from Design firms., • Perform general administrative functions to support the Design Engineering process with our Design Engineering clients., • Bachelor’s Degree in related field and 2+ years account management and/or sales/leadership experience; or equivalent experience., • HVAC, Mechanical Contracting, Engineering or Construction industry experience required., • Excellent initiative, and interpersonal communications skills and a demonstrated ability to influence others., • Ability to prioritize, multi-task, deal with ambiguity and manage high volume projects., • Strong PC skills in Microsoft Office applications including Word, Excel, PowerPoint, and Outlook. Other Skills/Abilities Strategic Skills Ability to learn new skills and knowledge. Ability to understand concepts and complexity comfortably. Open to change and will try anything to find solutions. Able to handle uncertainty and make decisions without knowing the whole story Operating Skills Ability to discern between tasks to determine how best to accomplish goals and organize task/people assignments to get results in a timely way. Ability to figure out processes and simplify them in order to maximize workflow. Behavior Skills Ability to manage people and situations when conflicts arise. Ability to seize opportunities with the drive to complete goals. Personal and Interpersonal Skills Ability to establish and grow relationships with customers through effective verbal and written communication. Dedicated to the needs of the customers, manufacturers and peers and has the patience to actively listen to all business partners. Able to solve problems and skillfully negotiate with a minimum of noise while managing stress. Demonstrates integrity and trust through appropriate directness and truthfulness. Ability to understand personal strengths and weaknesses, seek feedback and improve upon shortcomings. Negotiating Skills Ability to settle differences, compromise or reach agreement while avoiding argument and dispute. Presentation Skills Ability to communicate and transfer knowledge in a precise, concise and logical manner. Demonstrates professional facilitation skills and has a professional presence. Environmental Requirements Will be required to work in an office environment and frequently in the field. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard and telephone, reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization.