Mechanical engineering jobs in Los Angeles, California - Page 13Create job alerts

Job DescriptionHermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. As a Structures Manufacturing Engineer – Tooling & R&D at Hermeus, you will enable the rapid development, integration, and test of flight-critical structural assemblies through innovative tooling and hands-on manufacturing execution. This role is deeply embedded in early-stage design-build-test cycles, where speed, creativity, and engineering judgment matter as much as formal process. You will design and build tooling, fixtures, and ground support equipment while partnering closely with structures, test, and manufacturing teams to turn evolving designs into real, testable hardware. This is a highly hands-on role for engineers who like being on the floor, solving problems in real time, and iterating quickly to move flight hardware forward.What You’ll Do • Own the design, fabrication, and validation of tooling, fixtures, and ground support equipment supporting structural prototype builds, integration, and testing., • Rapidly iterate tooling concepts to support changing designs, test objectives, and build sequences., • Partner with structures, manufacturing, and test engineers to define integration flow, tooling interfaces, and build strategies., • Perform mechanical checks, fit-ups, and hands-on trials to qualify tooling for development and flight hardware builds., • Maintain configuration control, documentation, and safety standards across evolving tooling systems., • Support the build, integration, and inspection of primary and secondary structural assemblies for the Quarterhorse vehicle and future platforms., • Act as the primary interface between design engineers and technicians during prototype and flight hardware builds., • Identify integration challenges early and develop creative tooling or process solutions to maintain build velocity., • Provide direct, real-time design feedback based on hands-on build experience., • Support structural testing campaigns by enabling efficient, repeatable, and safe hardware setups., • Develop and refine prototype manufacturing processes with a focus on speed, flexibility, and learning., • Drive continuous improvement of tooling and build approaches to reduce iteration time and increase build quality., • Resolve non-conformances through hands-on troubleshooting and root cause analysis in collaboration with Quality., • Coordinate internal and external fabrication resources to meet aggressive R&D and test milestones.About You, • Bachelor’s or Master’s degree in Mechanical, Aerospace, Manufacturing, or related engineering discipline., • Strong engineering fundamentals and comfort applying first principles in ambiguous environments., • Hands-on experience with physical hardware., • Proven ability to design, build, test, break, and iterate rapidly., • Proficiency with CAD and familiarity with GD&T fundamentals., • Comfort using hand tools, test equipment, and working directly on the shop floor., • Familiarity with manufacturing processes such as machining, welding, forming, and assembly., • Strong communication skills and ability to collaborate across multidisciplinary R&D teams., • Willingness to work flexible hours, including overtime and weekends as needed.Desired Multipliers, • Experience in an R&D or startup development environment., • Direct experience designing or building tooling for large structural assemblies., • Experience supporting a flight development or experimental aircraft program.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Manufacturing team owns all process development, fabrication strategy, and production equipment for Terran R, our next generation, reusable rocket. This team has a wide variety of responsibilities – from factory floor layout, to developing complex tooling for novel processes, and interfacing with our vehicle engineering team to heavily influence design of the rocket. We leverage our deep expertise to translate engineering requirements into highly optimized production lines, working cross functionally to consistently enhance the vehicle program. This is a 1st shift position with a standard schedule of 5:00AM-3:30PM PT, Monday through Friday. Please note that this position is structured around a baseline expectation of a 50-hour workweek, which may include occasional overtime as needed to meet operational goals. About the Role: • The Integration technician role will play a critical role in ensuring that various components and systems of flight hardware are assembled, tested, and installed with the highest quality, • The role requires a combination of technical skills, attention to detail, and knowledge of aerospace processes, • Operate in fast paced manufacturing environment to successfully build and install flight hardware, • Collaborate with the production team, integration engineers and quality team to build, develop, and document job operations., • 4+ years of aerospace mechanical experience or related field, • Experience working in a fast-paced production environment handling flight hardware and performing critical operations, • Possess a wide range of technical skills including but not limited to fastener/torque applications, secondary retention, testing, avionics familiarity, and bonding operations, • Ability to effectively communicate (verbal and written) with engineering and production, • Ability to set up and operate a wide range of hand and pneumatic tools along with calibrated tools and measuring devices, • Must be able to climb ladders and be comfortable working in tight spaces, • FAA Airframe and Power Plant license, • Electromechanical build proficiency, • Familiar with propulsion systems and components At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$33.20—$45.65 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role: Hadrian is developing autonomous factories to support the defense industrial base. The Materials Lab Technician supports metallurgical analysis, material testing, and process validation for components produced in Hadrian’s manufacturing environment. This role performs laboratory testing, prepares metallographic samples, and documents material results to help ensure components meet engineering specifications and applicable industry standards. The position works closely with Materials & Process Engineers, Quality, and Manufacturing teams to support material verification and process validation activities. * Prepare metallographic samples, including cutting, mounting, polishing, and etching for material analysis * Perform laboratory testing such as hardness testing and microstructural evaluation using microscopy and other inspection tools * Conduct material verification against engineering drawings, specifications, and applicable standards * Document test procedures, results, and observations in accordance with internal quality and laboratory practices * Assist with material investigations, failure analysis activities, and validation of manufacturing processes such as heat treatment What We’re Looking For (job requirements): * Associate’s degree or technical certification in Materials Science, Metallurgy, Manufacturing Technology, or a related field, or equivalent practical experience * 2+ years of experience in a materials testing laboratory, quality laboratory, or metallurgical testing environment * Experience preparing metallographic samples and performing related laboratory procedures * Familiarity with hardness testing methods such as Rockwell, Vickers, or Brinell * Ability to read engineering drawings, material specifications, and follow documented laboratory procedures What Will Set You Apart (preferred qualifications): * Experience working in aerospace, maritime, defense, automotive, or other precision manufacturing environments * Familiarity with aerospace material standards such as AMS, ASTM, or related specifications * Experience supporting failure analysis investigations or mechanical property testing such as tensile testing * Experience working in quality-regulated environments or with laboratory documentation systems (e.g., ERP, MES, or digital quality systems) Compensation For this role, the target range is $30-45$ an hour (actual range may vary based on experience). This is the lowest to highest range we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Quality team is focused on embedding quality into every part of the design and production process for Terran R. Not just inspecting at the end but influencing how things are built from the start. The team embeds themselves directly within design, manufacturing, test, and launch teams to stay close to the hardware, understand constraints, and proactively shape decisions. As we move beyond initial development into production and then scaled operations, now is the time to put the right processes, controls, and inspections in place without slowing down progress. The team plays a key role in balancing risk, driving a culture of ownership, and ensuring that speed doesn't come at the cost of reliability. Success here means building a quality system that scales with the Terran R program and Relativity as a whole. This is a 2nd shift position with a standard schedule of 3:00PM-1:30AM, Monday through Friday, with a 10% differential on top of the base rate. Please note that this position is structured around a baseline expectation of a 50-hour workweek, which may include occasional overtime as needed to meet operational goals. About the Role: • Conduct thorough inspections (in-process and final) on propulsion components, large structures and mechanical assemblies., • Use precision hand tools to perform dimensional inspections on flight hardware, • Identify opportunities for process improvements and contribute to the development and implementation of quality initiatives within the organization., • Diligently review all hardware requirements and determine pass/fail status, documenting outcomes and any non-conformances or deviations found, • Take closeout photos of large integrated assemblies upon completion of final walkdowns., • 5+ years of quality inspection experience in an aerospace manufacturing environment, supporting production hardware., • Expert proficiency with precision hand tools (micrometers, calipers, bore gages), • Proven ability to work closely with design engineering, manufacturing, and production teams to resolve inspection and quality issues., • Demonstrated ability to perform thorough inspections and ensure strict compliance with quality standards and regulatory requirements., • Clear and effective communicator, capable of interfacing with inspectors, engineers, production personnel, and quality stakeholders., • Prior experience inspecting COPVs and/or avionics hardware, including electrical connectors, harnesses, and integrated assemblies., • Demonstrated ability to take initiative, lead projects, or influence quality improvement efforts without formal authority., • Highly organized and capable of bringing structure to ambiguous or previously undefined environments. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$33.15—$42.90 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The factories-as-a-service team analyzes our current customers' production and supply chain challenges, builds data-driven presentations, designs and scopes factories of the future, and assists the Federal and Strategic sales team in forming long-term partnerships with the DOD, Primes, and other manufacturers. This specific team is responsible for scoping, design, cost, schedule, and technology analysis, as well as proposals for major programs and manufacturing transformations across all manufacturing methods and domains. With several major programs in flight, we are hiring rapidly for this team that will effectively analyze, design, scope, plan, and handover (or join) execution of large-scale manufacturing efforts. The Role * This is the team that will restore forging to a core American industry * This role will oversee: CapEx and factory planning, workflow and automation planning, and material handling for Forging as part of the Factories as a Service team. * The Manufacturing Engineer for Forging will lead CapEx planning activities at a process level, and is responsible to coordinate the Tooling, Process, and Automation teams for development of part level SIPOC. * You’ll be able to rapidly review product drawings for manufacturability, take input from the tooling and process group(s) to select the right CapEx for manufacturing, process, handling, and inspection processes. Work within our automation team to advise on forging best practices and have a deep working knowledge of production and inspection methods for Forging. * This role will assist in building new factories for existing products and new programs, as well as contribute to the manufacturing processes of core products where Forging is a designed-in function. * We are seeking individuals who can analyze machine drawings and specifications at a technical level to determine manufacturing feasibility and efficiencies. You will plan, select, layout, and simulate new process and factory flows and will have ownership of the plant forging layout. We are conducting interviews at all levels. What You’ll Do * Analyze customer drawings and current state of production to design, build, and guide automation of Forging DFM, Production, and Inspection Lines. * Connect Tooling, Process, & Automation groups to determine manufacturing and inspection requirements to build a manufacturing plan. Specify and select appropriate CapEx to satisfy the manufacturing plan. * Contribute as a key player in Factories as a Service (FaaS) effort to build, edit, and scale forging capability thru maturation. * Deliver cost/schedule/solutions in partnership with our Supplier, Internal & External Customers, the Federal team, and the Executive Office. * Own CapEx planning, vendor selection, costing, delivery, and implementation schedules. What We’re Looking For * SME with deep expertise in metals forming production, automation, and material handling systems. * Able to travel ~25% to DOD and prime facilities * Able to analyze DFM, and design/plan production and inspection lines for Forming/Forging production. * Prior experience standing up new Forming/Forging capabilities in Defense, Aerospace, Automotive, Energy, or other critical infrastructure domains. * Ability to move quickly, make risk-adjusted decisions, and own the outcome of your work. * A self-directed IC that is comfortable working within ambiguity and without guardrails. * Reliance of the 1st principles of engineering to develop solutions in a structured, yet accelerated, pace. * A forward thinking, high character individual that possesses excellent communication skills and empathy for upward and downward collaboration and reporting. What Will Set You Apart * Working knowledge of forming/forging technology and metals processing. * Mechanical & Hydraulic machine design, thermal processing equipment, design of part handling systems. * Thermal & Vibration monitoring and dampening methods. * Machine vision and visual inspection techniques. * Software programming, simulation, or automation experience is not required, but helpful. * Demonstrated success in the design, plan, and execute stages of standing up metal forming production in a forging, mill, or foundry factory. * Working knowledge and understanding of factory infrastructure; such as, utilities, machine foundations, dust & waste collection and removal, rigging & lifting systems. * Applicable creative process in design & problem solving that is grounded in continuous improvement methodologies. * Practice the 5 C’s in your daily work – Character, Charisma, Candor, Creativity, & Collaboration. Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job DescriptionPOSITION SUMMARY:The Sales Development Associate role is designed for recent college graduates and early‑career professionals seeking a long‑term career in Aerospace sales. Through RBC’s comprehensive Rotational Development Program, associates build a strong foundation in technical and engineering, product, and operational knowledge by working directly within key functional areas. During these structured rotations, participants gain hands‑on experience with RBC’s products, manufacturing processes, and internal workflows while supporting real customer needs through technical problem solving and service coordination. This immersive, cross‑functional exposure equips associates with a deep understanding of how products are engineered, produced, and applied in the field. By bridging technical teams and customer-facing functions, the program develops the critical product expertise, commercial acumen, and practical experience needed to become a highly effective Outside Sales Engineer and contribute as part of RBC’s world‑class Aerospace sales team. The rotational development program curriculum will integrate a balanced mix of internal and external learning opportunities, self‑directed training, collaborative coaching, and hands‑on project work to ensure comprehensive career development and equips associates with both practical skills and core competencies essential to success. CAREER DEVELOPMENT AND KEY RESPONSIBILITIES: • Build a foundational understanding of RBC’s product management workflow and Product Lifecycle Management., • Build comprehensive knowledge of RBC’s full product portfolio, specialty products, and each division’s major products and applications., • Learn RBC’s market research, data analysis, and insight‑generation methodologies., • Gain foundational knowledge of pricing strategies, negotiation techniques, and account management principles., • Develop data‑driven proposals, research, and trend analysis to support product strategy, market positioning, audits, and customer inquiries., • Gain cross‑functional exposure to supply chain, purchasing, quality, inventory control, planning, application engineering, machining, testing, automation, and tooling., • Manage service‑related issues to reinforce customer trust and establish credibility as a trusted technical advisor., • Apply operational and technical knowledge to support customer requirements and product strategies., • Serve as a liaison between technical teams and customer‑facing functions, bridging engineering expertise with sales responsibilities., • Develop a clear understanding of end‑to‑end manufacturing processes, next‑level assemblies, and internal operational capabilities., • Develop technical and troubleshooting competency through direct customer interaction and application support., • Provide actionable feedback to internal departments to improve products, processes, and overall customer experience.EDUCATION AND EXPERIENCE:, • Associate’s degree or higher in Business, Communications, Marketing, Engineering, or related field., • Coursework or exposure in communications, sales, or marketing preferred., • Familiarity with technical sales or mechanical/engineering concepts is a plus., • Prior experience in customer service, market research, sales, or other customer‑facing roles preferred. Physical and Environmental Elements:While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. Also, the employee is regularly required to sit and talk or to listen. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status). Please include ALL work experiences on your resumes. We are only considering local candidates at this time. Please note that the salary range information is only applicable to California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee’s pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $70,500 to $70,500. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Qualifications:Education: Required:

Job Description Mechanical Engineer - Healthcare Our Mechanical Engineering team is looking to add an experienced team member to our group of talented engineers. The Mechanical Engineer is a technical expert and high-level engineer who experienced in healthcare, responsible for technical execution, design leadership, and interdisciplinary coordination of complex mechanical systems. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role manages major portions of mechanical and plumbing scopes, guides QAQC efforts, mentors team members, and represents the discipline in client-facing settings. As trusted advisors, they represent the firm in client relationships, ensure technical excellence, and guide engineering strategy at the highest level. Their work influences practice-wide standards, design innovation, and technical mentorship. Essential Functions: • Lead the design and documentation of large-scale and complex mechanical systems—such HVAC, plumbing and/or fire protection systems - from concept through construction with minimal oversight., • Validate and approve key mechanical engineering calculations -such as load calculations, or refrigerant concentration limit calculations, plumbing system sizing, and equipment sizing - and integrate results into system design., • Resolve system conflicts during interdisciplinary coordination by collaborating with architectural, electrical engineering structural engineering, and civil engineering teams., • Serve as the primary mechanical technical contact across internal and external project teams., • Review and approve mechanical submittals, answer RFIs and evaluate substitutions; coordinate detailed responses with the broader team., • Perform site visits, field verification, and project walks with high autonomy; generate professional-level reports., • Provide mechanical design leadership from early concept through construction administration; make system selections, and documentation strategy., • Guide QAQC reviews for mechanical deliverables and assists in the development of project-specific mechanical quality plans., • Mentor support engineers and mechanical designers through delegation, technical feedback, and one-on-one coaching., • Develop onboarding content, technical training sessions, and reusable tools that support mechanical team development and consistency., • Participate in fee development, scoping, and resource planning for mechanical and plumbing scope in project proposals., • Lead internal and external project meetings by presenting mechanical system concepts, drive client decisions, and trade-offs., • Guide mechanical response strategies to field conditions, code conflicts, and VE proposals with clarity and ownership., • Influence client expectations around quality, performance, technical decisions, and lifecycle outcomes of mechanical systems. Requirements • Bachelor's degree in Mechanical Engineering, required., • P.E. licensure required., • 15+ years in the AEC Industry preferred., • Experience in designing systems for healthcare projects is required., • Familiar with ASHRAE 170 and FGI Guidelines is preferred., • An understanding of the financial status of projects as they progress, value of client relationships and deliver projects with a focus on the quality is required., • Healthcare Facility Design Professional Certification is a plus., • ASSE 6060 Medical Gas Certification is a plus., • Advanced written and verbal communication skills are required., • Strong organizational skills required., • Revit experience working regularly in the model is required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. #LI-DD1

Job DescriptionDescription: About Bizzell US: Bizzell US (Bizzell) is a HUBZone-certified, consulting, strategy, investment, and technology firm that designs innovative solutions to help build healthy, secure, connected and sustainable communities in our nation and around the world. Bizzell leverages the combined experience of our diverse subject matter experts to develop data-driven, research-informed answers to the world’s most complex challenges – ensuring our clients achieve their vision and goals through innovative solutions. Bizzell’s multiple-disciplinary team of experts brings decades of providing quality technical and subject matter expertise across multiple areas including health solutions, workforce innovation, global programs, managed services and facilities management. Our expert staff and consultants successfully engage with Federal, state, local and international governments to help them leverage their data in order to improve outcomes for the lives of residents. We accomplish this goal by working directly with our clients, assisting them with problem-solving solutions. Bizzell provides customized, professional, and technical solutions and has a platform that stands at the forefront of Facilities Maintenance and Operations (M&O), merging advanced technology with strategic consulting to revolutionize facility management. Our commitment to excellence is evidenced through our comprehensive M&O services, ensuring that your facilities are not only efficient and reliable but also pioneering in sustainability and security. Catering to a broad spectrum of clients in both the government and private sectors, Bizzell provides comprehensive services, and specializes in managing large-scale operations and fostering connected communities, as demonstrated by our successful oversight of federal facilities across various states. Bizzell's core values—Excellence, Integrity, Service, Innovation, Professional Development, People First, Diversity, and Collaboration—drive us to exceed expectations, providing a proactive, innovative approach to facilities maintenance. Job Summary: Bizzell US has an opening for an on-site Energy Management Control Systems Manager (EMCS). This position is at the NASA Jet Propulsion Lab (JPL). The EMCS Manager effectively develops and implements programs, practices, and procedures to ensure the EMCS operates optimally and meets all JPL specifications/requirements. Additionally, the EMCS Manager is responsible for the maintenance and preventive maintenance of the site-wide EMCS, including but not limited to the system hardware, software, and security problem tickets. Responsibilities: • EMCS Manager monitors and performs diagnostic troubleshooting of program issues associated with Niagara AX / N4, Tridium platform, and Distech controls., • Ensures the Technicians perform day-to-day troubleshooting of system disturbances and corrections of Energy Management Control System (EMCS) related trouble calls and alarms., • Collaborates with the Maintenance Managers and HVAC crafts to solve HVAC/Mechanical issues utilizing EMCS., • Ensures the EMCS technicians analyze and upload EMCS security patches when available and required by JPL., • Runs daily and weekly EMCS reports to ensure system alarm management, and configurations are meeting JPL contract requirements., • Is directly responsible for fulfilling all JPL requirements associated with Bizzell’s EMCS operational plans and procedures., • Reviews and sign-offs on EMCS project acceptance, testing, and project close-out documents., • Ensures all EMCS preventive maintenance was completed on time and in accordance with the JPL TDD., • Assures that all EMCS upgrades/repairs are properly implemented and documented., • Ensures that all console alarms are acknowledged and addressed in accordance with all JPL contract requirements., • Responsible for and facilitates the weekly JPL / Bizzell EMCS meeting., • Identify and report deficiencies or anomalies noted within the EMCS system., • Maintains effective communications with the Bizzell team and JPL customers., • Runs EMCS reports when requested and makes system configurations when requested., • Responsible for the completion of all EMCS-assigned RCAs and corrective actions., • Work with the M&O group to specify, and provide vendor quotes, and information for material and components requested, • Maintains awareness of new and emerging EMCS technologies., • Perform all other duties as assigned to meet customer-critical missions. Benefits: Bizzell offers a wide range of benefits, including career development opportunities, short- and long-term disability and life insurance, and a 401(k) program with employer matching up to 3%. • Medical, Dental, and Vision Benefits, • FSA & HSA (Medical, Dependent Care, Commuter), • Company paid Basic Life, Short- and Long-term Disability, • Guardian and AFLAC Supplemental Insurance, • Legal and Identity Theft Plans, • 401(k) Retirement Plan with Employer Match, • Vacation and Sick Leave, • Paid Holidays Equal Opportunity: Bizzell is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. Requirements: Key Qualifications: • Must have the ability to resolve complex EMCS issues that require analysis, evaluation, and interpretation., • Thorough understanding of electrical and mechanical systems., • Knowledge of maintenance practices, procedures, work methods, materials, equipment, and tools to operate and maintain the system., • DISTECH 6001 or 6002 certification preferred., • Must know computer office operations and work order applications and Microsoft Office Suite., • Strong interpersonal skills and good customer service skills. Must have the ability to multi-task, be organized, pay attention to detail, be dependable, and be a team player., • Flexibility to work alternate schedules as necessary., • Ability to read and write in the English Language., • Valid CA driver's License and real ID., • Must be a US Citizen. Education and Experience: • The EMCS Manager must have hands-on HVAC / Controls experience, including troubleshooting and repairs., • Minimum of 10 years’ experience as an engineer technician, supervisor or manager experience preferred within a BMS / BAS and or EMCS Environment preferably with 5 or more years’ experience with Niagara N4, Distech, and BACnet., • Certifications in Niagara N4 and Niagara AX,, • Distech 6001 or 6002 are preferred. Preferred: • Bachelor's degree in Electrical or Mechanical Engineering or similar technology degree. Physical Requirements: Prolonged periods of sitting at a desk and working on a computer. This role is Tier 2 This position description should not be construed to imply that these requirements are the exclusive standards of the position, nor will these requirements be the sole basis for any subsequent employee evaluations.

Job Description About GITAI: Humanity has been developing horizontally on Earth, but we believe now is the time to expand vertically. With the decreasing costs of space access, the possibilities for exploration and utilization of space are expanding exponentially. At GITAI, we are at the cutting edge of this vertical development, providing the robotic technologies that enable safe and affordable labor in space. Our space robot solution reduces the operational cost in space by 100 times and will make sustained human presence and activity in space a reality. Your Mission The Mechanical Engineer, Space Robotics owns the end-to-end development of assigned mechanical hardware for robotic spacecraft systems, including robotic arms mounted to satellite buses, satellite bus structures, solar array mechanisms, battery system enclosures, avionics packaging, mounting structures, fixtures, and ground support equipment. This role is not limited to desk-based design. It spans concept design, CAD, drawings, prototyping, fabrication support, hands-on assembly, integration, verification testing, failure investigation, and early-stage manufacturing support. The engineer applies established design guidelines and best practices, then feeds lessons from real builds and tests back into GITAI's mechanical design standards to accelerate development cycles. What You'll Drive • Design and iterate mechanical hardware across robotic, spacecraft, satellite, and propulsion systems, optimizing for performance, reliability, and testability., • Work closely with electrical and software engineers to define requirements, interfaces, and assembly configurations that are practical to build and integrate., • Assemble, integrate, and maintain prototypes and early builds, and feed insights back into the design to improve buildability and serviceability., • Bachelor's degree in Mechanical Engineering or a closely related discipline., • 1+ years of relevant experience designing, analyzing, and supporting the manufacturing of electro-mechanical systems or mechanisms. Internship, research, and extracurricular project experience counts., • Proficiency with mechanical CAD., • Experience creating mechanical drawings and maintaining drawing packages., • Hands-on ability with mechanical assembly, integration, and testing., • Must be able to safely lift and move items up to 40 pounds (with or without reasonable accommodation), including during assembly and test activities., • Flexibility to work weekends as needed based on build and test schedules., • Willingness to spend up to 50% of work time outside of Torrance at test sites (including Mojave and the greater Los Angeles area). Travel may increase for short periods during critical integration and test campaigns., • Location: Torrance, CA (onsite). Travel to test sites (including Mojave and the greater Los Angeles area) is expected based on program needs., • Employment Type: Full-Time, Exempt, • Salary Range: $100,000 – $125,000 per year + equity (commensurate with experience), • Health Insurance – Platinum medical plan with 100% company-paid medical, dental, and vision coverage for employees; 90% for dependents, • 401(k) Plan – Company match up to 3.5%, with traditional and Roth options, • Equity – Stock option eligibility depending on role, • Relocation Support – Available for qualifying positions, • Time Off – 11 paid holidays per year, 12 days of paid vacation per year, and paid sick leave (in accordance with applicable law), • Office Perks – Free snacks and drinks, plus regular team events, • Mission-Driven Culture – Work alongside passionate teammates on real space hardware, • Cutting-Edge Work – Direct access to next-gen space robotics and flight hardware No agency submissions, please. Compensation includes both salary and potential equity, and may be adjusted based on the candidate's experience and skillset. LA salary range$100,000—$125,000 USD Important Notice: • Applicants must be currently authorized to work in the U.S. This role is not eligible for visa sponsorship., • To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), GITAI Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable., • GITAI USA is an Equal Opportunity Employer. Employment with GITAI USA is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Description= Design, engineer, and develop production tools and dies. Study and build prototype pieces, die models, and templates based on customer applications, engineering blueprints, and tool orders. Collaborate with engineering specialists to resolve design and technical problems regarding material components, manufacturing, and machinery requirements. Assemble and operate machine tools such as lathes, milling machines, radial drill presses, shapers, and grinders and verify conformance of machined parts to specifications. Analyze data from trials and production and modify tool designs to improve tool life and performance. Develop tool mechanisms using tridimensional and mathematic configurations that verify dies and other components’ dimensions, clearances, and alignment, working with tolerances as close as 0.0005 inches. Conduct theoretical and mechanical analysis to enhance the fabrication, assembly, and performance of tools and dies within the overall mechanical and hydraulic process. Examine the shapes, dimensions, and clearances of tools to verify conformance to specifications and inspect finished dies for irregularities, contour congruity, and defects. Ensure accurate analysis of tool and die repair and maintenance. Stay abreast of the latest advances in tool and die making and engineering to drive the continuous improvement of our tool and die making methodology and service offerings. Requirements= The position requires four years of experience as a tool and die maker or related field. The position requires skills and knowledge in AutoCAD tools, Computer Aided Design (CAD) and Drafting, and 3-D Keycreator. 40 hours/week. Job Interview Site: Compton, CA. Email Resume to: Serra Manufacturing Corporation at

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Stage Manufacturing team turns design into reality, owning the build of Terran R's primary structures. This isn't about turning the same bolt every day; it's about building the systems to build the rocket. Engineers and technicians work side by side, with deep collaboration and real-time feedback, to shape how we build better and faster. With a manifest and a launch date, it's up to the team to deliver on Terran R: solving challenges in real time, optimizing for scale, and constantly improving processes. As the vehicle evolves, so will the factory, with opportunities to apply automation, machine learning, and advanced technologies. What we build here sets the blueprint for the future of scaled launch. About the Role: • Own operations on our 2 large 3-axis mills (20'x8') and VTL (20' diameter) and help introduce new products to these machines as well as improve current high-volume work across the 3-axis mills and, • Collaborate closely with a diverse team of engineers specializing in design, manufacturing, and reliability, as well as internal production teams and external vendors, leveraging their collective expertise to drive progress., • Create work instructions, specifications, and best practices across multiple high-fidelity processes. Help standardize processes across the manufacturing team., • Help establish new machining work centers by championing the tooling and process definition needed to build parts for Terran R., • Support the shop floor through live issue resolution and provide upstream feedback as we innovate the next generation of manufacturing technology., • Bachelor's degree in manufacturing, aeronautical, mechanical engineering, or other engineering discipline, 2+ years progressive and related experience required, • 3D & 2D design/drafting skills per ASME Y14.5M (NX preferred), • Excellent interpersonal skills with the ability to interface with engineering and manufacturing groups to understand process constraints and provide design inputs for improved manufacturability, • Direct experience with CNC milling and turning operations across multiple materials., • Understanding of machine programming (G-code) and machine set-up., • Extensive experience with CNC milling, turning, and drilling operations accross multiple materials. Aluminum experience and large parts >6' is preferred., • Extensive experience with designing workholding for complicated machining operations., • New product introduction of an aerospace hardware system into a manufacturing, test, and production system with proven success Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$112,000—$143,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Stage Manufacturing team turns design into reality, owning the build of Terran R's primary structures. This isn't about turning the same bolt every day; it's about building the systems to build the rocket. Engineers and technicians work side by side, with deep collaboration and real-time feedback, to shape how we build better and faster. With a manifest and a launch date, it's up to the team to deliver on Terran R: solving challenges in real time, optimizing for scale, and constantly improving processes. As the vehicle evolves, so will the factory, with opportunities to apply automation, machine learning, and advanced technologies. What we build here sets the blueprint for the future of scaled launch. About the Role: • Design and commission new test assets and systems to unlock new test capabilities or enhance existing ones while working closely with design and manufacturing partners to ensure the successful execution of production testing campaigns that are both efficient and scalable over time., • Manage a team of test engineers that serve all major products of the Vehicle Integration and Test scope. End-to-end problem ownership and handling of GSE to develop test systems that scale for production., • Author and optimize test sequences, plans, procedures, and operational processes to support first-article development and transition into high-volume production., • Analyze data to evaluate assembly performance and disposition recurring testing discrepancies and support multi-disciplinary teams on root cause analysis and corrective actions., • Define and standardize operational requirements and processes to improve safety, data quality, and test repeatability., • Bachelor's Degree or higher in Aerospace, Mechanical, or Electrical Engineering; or other related discipline., • 3+ years of relevant technical experience, including (but not limited to): Authoring and executing test plans and procedures on complex high-pressure pneumatic and high-voltage electrical systems; High-pressure pneumatic leak checks, sensor checkouts, high-voltage electrical system checkouts, integrated system testing; Designing and commissioning pneumatic and electrical test equipment; Leading failure and anomaly investigations, resolving non-conformances, and driving root cause analysis with corrective actions implemented effectively, • Strong understanding of and ability to apply engineering fundamentals in fluid, thermal, mechanical, and electrical engineering., • Demonstrated knowledge of safety standards, common test hazards, and appropriate mitigations., • Experience in a fast-paced and lean environment, including direct vendor engagement, tool development, or leading a small team through an ambiguous build or test effort, • Familiarity with industry test standards: e.g., SMC-S-016, MIL-STD-1540D, and MIL-STD-810G., • Knowledge of launch vehicle components such as regulators, check valves, orifices, and electromechanical and pneumatically actuated valves Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$132,000—$181,500 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! QUALITY INSPECTOR II – MECHANICAL Based out of Rocket Lab's Headquarters in Long Beach, CA the Quality Inspector II - Mechanical is responsible for carrying out inspections using, but not limited to, prescribed inspection criteria. A high level of attention to detail is needed to detect anything related to the product that does not meet engineering/production standards. In this role you will help prevent faulty hardware from progressing in the manufacturing process and support root cause mitigation and elimination of failure modes. You will support the Quality Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors. WHAT YOU'LL GET TO DO: • Perform complex mechanical inspections for purchased parts, 3D-printed components, CNC-machined items, electro-mechanical components, and propulsion assemblies., • Perform all types of precision inspections, including receiving, in process and final assembly inspections. This includes capability to effectively use hand measurement systems and CMM., • Thoroughly document non-conformance in accordance with Rocket Lab systems and procedures in our internal ERP, MES and Issue tracking system., • Collaborate with engineering and management to improve work instructions and identify critical inspection points in the process., • Coordinate with Production personnel to prioritize workload and enable the team to meet key delivery milestones., • Embody a Built in Quality philosophy, consistently detecting non-conformance (Don't accept a Defect – Don't Pass a Defect) and preventing escapes to downstream customers. YOU'LL BRING THESE QUALIFICATIONS AS A QUALITY INSPECTOR II: • 2+ years of experience working in a quality assurance role in a quality mechanical manufacturing environment., • Experience with Geometric Dimensioning and Tolerancing (GD&T), • High school diploma or GED THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Experience in space manufacturing in-process environment on engine builds, • Experience with precision measuring equipment such as comparator, romer arm, Keyence Vision System, and/or CMMs (PC-DMIS), • Experience performing visual inspections using borescope, • High level of experience using hand measuring instruments including calipers, micrometers, depth gauges, feeler gauges, pine gauges, thread gauges, surface roughness measurement, microscope etc, • Inspection experience with aerospace components & assemblies, • Experience working with Enterprise Resource Planning (ERP) systems ADDITIONAL REQUIREMENTS: • Ability to work one of the following shifts:, • 5:00AM - 3:30PM Monday – Thursday, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus, • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing, • Must be physically able to commute to buildings Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$24—$30 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionAre you ready to be apart of changing the game for pharmacy automation with next generation solutions? Come join us! Who We Are: ARxIUM is a leader in the development of advanced pharmacy technology and solutions. Here you have the opportunity to work with the best experts in the pharmacy health systems sector paving the way with innovative automation hardware and software technologies. ARxIUM has been providing innovative solutions in the pharmacy automation space for over twenty years and currently serves customers in North America, Europe and Asia. We have offices in Winnipeg and the Chicago Area and work remotely in cities across North America and Europe. ARxIUM is proud to offer the successful candidate • Competitive salary, • Medical/RX/Dental/Vision benefits, • Healthcare and dependent care FSAs, • Company paid Life/ADD insurance, • Company paid STD plans, • Company paid EAP plan, • Opportunity to participate in the company 401k plan with employer match Please note that this position involves travel requirementsWho We're Looking For: • Diploma or degree in a technical field including, but not limited to: mechanical, electrical, computer, biomedical., • 3 - 5 years experience programming Allen-Bradley PLCs., • Conveyor and Automation experience., • Engineering and Electrical experience., • 7+ years of direct field service (or equivalent) experience troubleshooting and repairing computerized electro-mechanical systems., • 7+ years of experience working in a service capacity with direct customer interaction.What You'll Be doing:, • Perform software and hardware preventive and corrective maintenance., • Perform software and hardware emergency break fix service calls., • Refines and validates PLC Coding., • Works with the facility to schedule appropriate downtime for preventive and corrective maintenance., • Responsible for timely and accurate completion of all paperwork and reports. This includes ticket updates and closures, expenses, timesheets and other administrative requirements., • Responsible for following up on open issues, tickets and escalations., • Working Outside normal business hours may required to service products., • Performs other duties as required. Take a look at your potential career with ARxIUM and apply today. WE would love to meet you! Powered by JazzHR 1eYat3XmJP

Job DescriptionLEAD APPLICATIONS ENGINEER (AUTOMOTIVE) Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. Freeform is hiring a Lead Applications Engineer to serve as the primary technical interface between Freeform and a portfolio of our most advanced automotive and EV customers. This person will apply their technical background and intimate understanding of automotive hardware, tooling, and production needs to translate real engineering problems into manufacturable solutions that only Freeform's technology can unlock. You will own the technical relationship with customers, guide them through application discovery and feasibility, and help shape how Freeform's manufacturing platform is deployed across some of the most ambitious programs in the industry. The ideal candidate comes from a strong engineering background, understands complex automotive systems, and is comfortable engaging directly with senior engineers and decision makers at highly sophisticated and cutting-edge organizations. This person should be comfortable leading deep technical discussions across performance, manufacturability, materials, qualification, and production tradeoffs, and translating those conversations into a broader, programmatic vision that helps customers understand how Freeform's technology can unlock entirely new design and production possibilities. Responsibilities: • Serve as the primary technical point of contact for a portfolio of automotive and EV customers, • Lead deep technical discussions with customer engineering teams across applications for automotive vehicles, tooling, and production processes, • Develop a deep understanding of customer system requirements, constraints, and performance drivers, • Translate customer needs into manufacturable solutions using Freeform's technology, including geometry, materials, tolerances, and production considerations, • Clearly articulate what Freeform's manufacturing platform can and cannot deliver, including tradeoffs and constraints, • Independently answer advanced technical questions related to materials, processes, qualification pathways, and production scalability, • Identify where Freeform's technology enables new designs, architectures, or performance regimes that were previously impractical or impossible, • Work closely with internal engineering and operations teams to align on feasibility, execution, and roadmap - but without depending on them for basic technical credibility, • Guide customers through early application exploration, development phases, and transition into production, • Build long-term, trust-based technical relationships with customer engineers, program managers, and technical leadership, • Provide feedback from the field to influence Freeform's product, process, and roadmap decisions Basic Qualifications: • Bachelor's degree in engineering or similar technical discipline, • 5+ years of experience in an engineering, program management, or leadership role within the automotive, EV, or closely related industry, • Strong systems-level understanding of complex mechanical hardware and how components function within larger assemblies Nice to Have: • Prior experience in a customer-facing technical role such as applications engineering, systems engineering, or field engineering, • Ability to clearly communicate complex technical concepts to both engineering and non-engineering stakeholders, • Familiarity with metal manufacturing processes, including additive manufacturing, casting, forging, or advanced machining, • Experience supporting hardware through development, qualification, and production ramp, • Strong intuition for design-for-manufacturing and production scalability, • Strategic thinker with a strong business acumen, • Team player, positive attitude, growth mindset, integrity, accountability, adaptability, entrepreneurial, driven, results-oriented and ethical Location: * Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. * Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $120,000-$185,000. The upper end of the range is reserved for individuals who demonstrate exceptional experience, deep domain mastery, and a proven history of high performance and impact., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionAbout Machina Labs: Engineering moves at software speed. Manufacturing doesn't. Yet. Machina Labs is changing that. We build intelligent, software-defined factories that produce complex metal structures directly from digital design. By integrating advanced metal forming, robotics, and automated production inside a flexible factory architecture, we enable customers to move from prototype to production in weeks, not years. Backed by Lockheed Martin, Toyota, and NVIDIA, we're building the manufacturing infrastructure that defense, aerospace, and advanced mobility programs will run on. If you want to work on hard problems that matter and see them fly, drive, and defend, this is the place. Job Description: Machina Labs is seeking a Machine Production Technician to support the serial production of Roboform, our robotic sheet-metal forming systems. This hands-on role focuses on executing precision assembly work in a structured production environment, following standardized processes to meet safety, quality, and delivery targets. Production Technicians work closely with production leads and engineering to maintain throughput, traceability, and continuous improvement as production scales.Key Assembly-Focused Responsibilities: • Setup, operate, maintain, and support Machina Labs Roboform cells., • Perform secondary finishing operations including trimming, deburring, grinding, and coating., • Assemble mechanical frames, sub-assemblies, and complete Roboform cells using released CAD files, assembly drawings, and work instructions., • Perform HV/LV wiring, cable routing, and electrical enclosure assembly in compliance with IPC/WHMA-A-620 standards., • Install and connect hydraulic and pneumatic systems, including hose fabrication (1/4"–1"), valves, pumps, manifolds, and actuators., • Execute structural upfits and modifications (drilling, tapping, cutting, deburring, touch-up finishing)., • Safely rig, lift, and position heavy components (up to 15 tons) using forklifts, cranes, and approved lifting plans., • Execute functional testing, system integration (including Fanuc/Kuka robot setup), and verification steps to ensure cells meet production specifications., • Record assembly progress, material usage, and deviations in ERP systems to ensure traceability., • Contribute improvement feedback and support cross-training as production scales., • Follow standardized processes, contribute feedback on tooling/workflow improvements, and help train team members as production scales.Basic Qualifications:, • High school diploma or equivalent., • 1+ year of fabrication related experience (machining, welding, fitting, etc.), • 3+ years of hands-on mechanical, electrical, or hydraulic assembly experience., • Ability to read mechanical drawings, schematics, and understand geometric tolerances., • Experience with hydraulic/pneumatic systems, assembly, troubleshooting, and hose fabrication., • Proficiency with common hand and power tools., • Basic computer proficiency, including ERP systems and common productivity tools., • Effective communication skills in a team-based production environment., • Ability to pass background screening requirements (including ITAR compliance).Preferred Qualifications:, • Hands-on experience working with industrial robotic and automated systems; Fanuc or Kuka platforms preferred., • Working knowledge of CAD and PDM systems for accessing and interpreting released design files (e.g., SolidWorks)., • Certified or demonstrated proficiency in IPC/WHMA-A-620 standards for cable and harness assembly., • Proven ability to safely rig, lift, and position heavy industrial components using cranes, forklifts, or similar equipment., • Experience performing precision machining and fit-up operations, including drilling, reaming, countersinking, and tapping close-tolerance holes.Safety & Physical Requirements:, • Ability to safely work assigned shifts, including extended hours and occasional weekends, in support of production schedules., • Capability to perform repetitive tasks involving bending, twisting, and fine motor hand movements while maintaining safe work practices., • Comfort working in a manufacturing environment with exposure to shop noise, industrial equipment, and common production chemicals (e.g., coolants, solvents, cleaners, paint), using required PPE., • Ability to stand for extended periods and safely lift, carry, and handle materials or equipment up to 50 lbs. unassisted.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Avionics team is responsible for all aspects of the electrical design on the rocket, from electronics, interconnects, associated mechanical design, testing and initial production. This team's scope includes the flight computers, power systems, RF systems, PCB design, autonomous flight safety systems, and telemetry. This team works on complex electrical systems that require modularity and flexibility, and are critical to the successful launch of Terran R, and beyond! About the Role: As a Manager of Avionics Production, you will play a crucial role in developing and guiding the Production team while defining key projects, goals, and initiatives. Your expertise in lean manufacturing will be essential in identifying production gaps and inefficiencies, advocating for the implementation of tools, systems, and processes that enhance overall performance. You will be responsible for driving continuous improvement across the production floor, ensuring that the team meets high standards of quality and efficiency. Your leadership will be vital in optimizing manufacturing workflows, reducing waste, mentoring the growing engineering team, and achieving operational excellence. About You: • Bachelor's degree in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Manufacturing Engineering, or a related field, • 6+ years of experience in a leadership or management role, • Strong understanding of manufacturing of avionics systems, including PCBA manufacturing; harness fabrication; and electronics box assemblies, • Background in lean manufacturing principles; process optimization; and quality management systems, • Prior experience with scaling low-volume or pilot production lines to high volume, • Understanding of AS9100 processes and quality management systems, • Experience with electronics supply chain management, • Familiarity with quality process controls for PCBAs, wire harnesses, and electromechanical assemblies Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$146,000—$178,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job DescriptionDescriptionAs a Senior Development Test Engineer at Impulse, you will be responsible for all aspects of test equipment design and test operations while working closely with a fast paced, agile team that produces high-performance spacecraft from clean sheet designs. Responsibilities • Design and build fluid, mechanical and electrical systems in support of liquid rocket propulsion and spacecraft systems testing, • Fully own key test assets and major test programs while collaborating with wide ranging teams across the company, including Redondo Beach and Mojave, • Coordinate with external vendors and contractors to meet project technical and schedule objectives, • Perform test setup, hardware inspections, checkouts and troubleshooting as needed, • Conduct test operations geared toward rapidly developing hardware for spaceflight, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Bachelor’s degree in mechanical, aerospace, electrical engineering or related field, • 5+ years of experience in hardware development testing, • Strong engineering fundamentals in thermal, structural, and fluids analysis, • Prior hands-on operational experience working with aerospace test facilities, • Previously demonstrated ownership of test stand design and build-up, • Able to create and clearly communicate fluid P&IDs, electrical and controls schematics, • Able to identify and procure appropriate test equipment, • Proficient with data acquisition and control methods, • Demonstrated ability of taking project ownership and working well in small teams Preferred Skills and Experience • Demonstrated prior experience working with complex systems including cryogenic propellants, high pressure gas systems, hydraulics and/or combustion devices, • Demonstrated working knowledge of components (valves, regulators, sensors, power supplies) and hands-on skills (tube fabrication, metalworking, wiring), • Demonstrated hardware testing experience with rocket engines, or spacecraft, • Experience in a startup or agile development environmentAdditional Requirements: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Role Overview Radiant is seeking a Loads & Dynamics Engineer to own and execute structural loads, vibration, and dynamic analyses for complex mechanical systems associated for Kaleidos, the worlds first portable microreactor and supporting hardware. You will play a critical role in ensuring structural integrity and survivability across all phases of the product lifecycle, including manufacturing, transportation, handling, deployment, and operational environments. This role requires a hands-on engineer who is comfortable working in ambiguous, fast-paced environments and collaborating closely with structures, mechanical design, thermal, nuclear, and test teams. Responsibilities * Develop and own static, dynamic, and transient loads for reactor systems, support structures, and transport configurations * Perform structural dynamics analyses, including modal, random vibration, shock, sine vibration, and fatigue assessments * Implement explicit dynamics simulations to model nonlinear reactor response under transient seismic and transportation event cases * Define and analyze transportation and handling environments, including shock and vibration from road, rail, air, or sea transport * Generate load cases and environments to support structural sizing, design margins, and verification plans * Conduct finite element analyses (FEA) using tools such as ANSYS, Abaqus, or similar tools * Collaborate with design engineers to influence hardware architecture, material selection, and joint design * Support test planning and correlation, including shaker tests, modal surveys, and structural verification testing * Develop and maintain analysis documentation, reports, and requirements for internal reviews and regulatory interfaces * Contribute to failure investigations, root cause analyses, and design improvements * Help establish best practices for loads, dynamics, and structural verification within a growing engineering organization Required Qualifications * Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Structural Engineering, or a related field * 3+ years of experience in loads, dynamics, or structural analysis for complex mechanical systems * Strong fundamentals in structural mechanics, dynamics, and vibration * Experience with finite element modeling and analysis of metallic and composite structures * Proficiency with industry-standard FEA tools (e.g., ANSYS, Abaqus, Nastran) * Familiarity with design allowables, safety factors, and margin-of-safety methodologies * Ability to work cross-functionally and communicate analysis results clearly to both technical and non-technical stakeholders Preferred Qualifications * Experience in aerospace, launch, defense, nuclear, or heavy industrial hardware environments * Dynamics modeling software experience (LD-Dyna, Abaqus explicit, or other) * Background in shock and vibration testing and test-article correlation * Knowledge of fatigue, fracture mechanics, and bolted joint analysis * Experience defining or interpreting environmental specifications and requirements * Master’s degree or PhD in a relevant engineering discipline * Familiarity with nuclear, spaceflight, or safety-critical system requirements Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. Compensation Range: $106,500 - $146,475

Job DescriptionCompany Description We Are Bosch. At Bosch, we shape the future by inventing high-quality technologies and services that spark enthusiasm and enrich people’s lives. Our areas of activity are every bit as diverse as our outstanding Bosch teams around the world. Their creativity is the key to innovation through connected living, mobility, or industry. Let’s grow together, enjoy more, and inspire each other. Work #LikeABosch • Reinvent yourself: At Bosch, you will evolve., • Discover new directions: At Bosch, you will find your place., • Balance your life: At Bosch, your job matches your lifestyle., • Celebrate success: At Bosch, we celebrate you., • Be yourself: At Bosch, we value values., • Shape tomorrow: At Bosch, you change lives.Job Description The Head of Post Merger & Implementation (PMI) will lead the integration efforts following U.S. Air’s acquisition into Bosch. This person will also coordinate and track the implementation of the value creation plan defined with this acquisition. The role requires a strong background in corporate finance, post-merger integration, and operation experience including HVAC distribution & logistics. Experience in transformation leadership in manufacturing (HVAC preferred), distribution and or field services driving synergy, cost alignment, and sustainable value creation is a plus. Upon successful completion of the PMI responsibilities (approximately 2-3 years), this opportunity will transition into an operational leadership role. Job Duties and Responsibilities • Develop and execute post-merger integration strategies in alignment with corporate objectives, financial targets, and cultural priorities, • Drive the value creation plan through setting up an action plan with concrete measures and track and report on their execution, • Partner with executive leadership to define integration roadmaps and governance frameworks, • Lead cross-function integration and collaboration teams across Sales, Finance, Operations, IT and HR, • Oversee Financial modeling and reporting, • Establish and maintain PMI standards consistent with company quality and compliance systems, • Drive change-management initiatives and support continuous improvement by enhancing Financial reporting, time-to-market, cost optimization and customer satisfaction, • Mid term: identify, develop and track corresponding measures for overall company financial performance improvement., • Willing to partner with the sales team. Also provide support to . warehousing, stores and front office when needed.Qualifications, • MBA or Master’s degree in Finance, Economics, Business Administration, or Mechanical Engineering, • Manufacturing operations experience including supply chain with a strong understanding of the manufacturing processes and service operations, • 10+ years of progressive operations leadership experience in HVAC, distribution, manufacturing or industrial products., • Exceptional analytical, communication, and stakeholder-management skills Additional Information Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable. Additional Information The U.S. base salary range for this full-time position is between $213,000- $240,000 Within the range, individual pay is determined based on several factors, including, but not limited to, work experience and job knowledge, complexity of the role, job location, etc. This range does not include annual bonus percentage nor any other monetary considerations for the total compensation package. Your Recruiter can share more details about the specific salary range for this position during the interview process. In addition to your base salary, Bosch offers a comprehensive benefits package that includes health, dental, and vision plans; health savings accounts (HSA); flexible spending accounts; 401(K) retirement plan with an attractive employer match; wellness programs; life insurance; long term disability insurance; paid time off; parental leave. Pay ranges included in the postings, when included, generally reflect base salary; certain positions may include bonus, or additional benefits. Equal Opportunity Employer, including disability / veterans *Bosch adheres to Federal, State, and Local laws regarding drug-testing. Employment is contingent upon the successful completion of a drug screen and background check. Candidates who have been offered the position must pass both screenings before their start date. #LI-AZ1

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Propulsion team at Relativity is focused on developing and delivering highly performant and manufacturable engines for Terran R. Engineers are responsible for the entire lifecycle of their parts, from initial design through production to qualification and flight. The team fosters a culture of bottoms-up decision-making, free from technical gatekeeping, where ownership and accountability are key at all levels. But designing engines with a quarter million pounds of thrust is just the beginning. As the flight configuration enters qualification, the team is now exploring modifications for future engines, including thrust upgrades, new cycles, and design for mass production. About the Role • Responsible for the thermal, structural, dynamic, and durability (fatigue/fracture) analyses on Aeon-R engines and subsystems, to guide design decisions and ensure reliability and performance requirements are met, • Responsible for the analysis of 3D-printed engine components, complex mechanical assemblies, and/or the structural integrity of the fully integrated engine assembly, • Work hand-in-hand with mechanical designers and manufacturing engineers to arrive at optimal solutions for the engine and vehicle programs, • Develop and execute tests to support development and qualification, including hands-on work like test article integration, instrumentation setup, and data processing About You • Bachelor's degree in a science, engineering, technology, or mathematics field, • 5+ years of relevant analysis experience, preferably with complex engineering systems, • Experience with Finite Element Analysis, • Experience with computer aided design (CAD) software, • Detail-oriented, organized, and able to follow through, • Experience with design of liquid propulsion components and systems, • Experience with Siemens NX, Teamcenter, and ANSYS workbench, • Familiarity with industry best practices Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$132,000—$181,500 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job DescriptionPROCESS ENGINEER (ADVANCED R&D) Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As a Process Engineer at Freeform, you will have the unique opportunity to invent novel processes for the world's most advanced metal 3D printing systems. You will deep dive into complex, multi-physics phenomena to gain a fundamental understanding of the system and use those learnings to create a new state-of-the-art process. You will work alongside an interdisciplinary team of mechanical, software, and simulations engineers to analyze massive in-situ data sets as well as post-print material characteristics and rapidly iterate on improving the printing technology with machine learning. The ideal candidate will be comfortable working in a fast-paced R&D environment, solving very audacious problems from scratch. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative engineers who love solving hard problems and creating amazing technology! Responsibilities: • Assist the Process Engineering team in developing a deep understanding of the metal additive process and hardware operation by analyzing massive in-situ data sets to gain insight into physical mechanisms of the printing process, • Drive execution of experiments, analyze data, and develop and optimize processes on a metal additive system, • Perform post-build metrology measurements and analysis of material properties such as tensile strength, surface roughness, and alloy microstructure, • Generate and track quality metrics of printed customer parts such as dimensional accuracy, defect distribution, and surface roughness, • Assist in the development and implementation of tool qualification procedures, • Collaborate with mechanical, software, and simulations engineers to analyze data and rapidly improve printing processes Basic Qualifications: • Bachelor's degree in material science, physics, or similar engineering discipline, • First principles thinker with strong fundamentals in physics, • Experience with experimental design and statistical data analysis, • Strong data analysis skills and ability to interpret important information from extremely large data sets Nice to Have: • Undergraduate research experience in material science, physics, mechanical engineering, • Process development experience from cutting edge industries such as semiconductor, solar, or displays, • Experience with Python and/or MATLAB, • Experience with statistical data analysis software such as R, JMP, or Minitab, • Experience operating complex equipment, • Familiarity with metallurgical sample preparation such as cutting, grinding, polishing, acid etching, and optical microscopy, • Passion for developing new processes from scratch, • Excellent verbal and written communication skills Location: * Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. * Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $95,000-$140,000. The upper end of the range is reserved for individuals who demonstrate exceptional experience, deep domain mastery, and a proven history of high performance and impact., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Avionics team is responsible for all aspects of the electrical design on the rocket, from electronics, interconnects, associated mechanical design, testing and initial production. This team's scope includes the flight computers, power systems, RF systems, PCB design, autonomous flight safety systems, and telemetry. This team works on complex electrical systems that require modularity and flexibility, and are critical to the successful launch of Terran R, and beyond! About the Role: As a Senior Component Engineer on the Avionics Hardware team, you will source, test, and qualify EEE piece parts that support the electronics on Relativity's rocket, Terran R. You will support the team through the full product lifecycle from conceptual trades helping identify components for various use-cases, screen and qualify components, and lead failure analysis investigations in test. You will work with cross-functional partner teams across the company to help the team make the best possible decisions for the overall vehicle. A strong candidate for the role will have a deep technical background in electronics design and test. About You: • Bachelors degree in Electrical Engineering, Computer Engineering, or a related field, • 5+ years of experience in electronics design for harsh environments and mission-critical applications such as launch vehicles, spacecraft, aircraft, or robotics, • Familiarity with active and passive electronic components and failure modes, • Familiarity with destructive and non-destructive failure analysis methods (DPA, X-Ray, CSAM), • Knowledge of automotive, industrial, and military EEE piece-part ratings, • Experience with EEE piece part supply chain and manufacturing methods Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$148,000—$203,500 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description Why Castelion, Why Now Castelion is moving incredibly fast to develop and deliver advanced defense systems at a time when execution matters more than ever. We believe focus and technical excellence are decisive advantages - and we are building a team that can deliver real capability, not just concepts. This is a rare opportunity to join at an early stage, where your work will directly shape critical systems, influence major technical decisions, and have immediate, real-world impact. Senior Manufacturing Engineer – Avionics Electro-Mechanical Assembly We are seeking a Senior Manufacturing Engineer with deep expertise in the high-reliability assembly and integration of avionics and electromechanical systems for hypersonic missile vehicles. This role focuses on developing, optimizing, and scaling manufacturing processes for complex avionics hardware—including printed circuit board assemblies (PCBA), wire harnesses, electronic enclosures, sensors, actuators, connectors, and electromechanical subassemblies—to achieve repeatable, high-yield production. You will serve as the technical authority on avionics electromechanical manufacturing, partnering with design, integration & test, quality, supply chain, and automation teams to transition advanced avionics from prototype to high-rate production while meeting stringent DoD, AS9100, IPC, and mission-critical reliability standards. Responsibilities • Lead manufacturing process development for avionics electromechanical assembly, including PCBA integration, conformal coating, potting, wire harness routing, connector termination, and enclosure sealing., • Design and qualify production tooling, fixtures, automated work cells, and test equipment for precision electromechanical build and functional verification., • Execute Design for Manufacturability (DFM), Design for Assembly (DFA), PFMEA, and control plans to drive first-pass yield >95% and aggressive cycle-time reduction., • Establish statistical process control (SPC), in-process inspection, and metrology strategies for critical avionics parameters (torque, continuity, insulation resistance, leak testing)., • Scale production from low-rate initial production (LRIP) to full-rate manufacturing, including line balancing, capacity modeling, and cost-reduction initiatives., • Perform root-cause analysis and corrective actions for assembly defects using 8D, fishbone, and fault-tree methods; support MRB/FRB dispositions., • Author and maintain detailed work instructions, travelers, and quality records compliant with customer requirements., • Collaborate with suppliers on incoming material qualification for PCBs, connectors, and electromechanical components., • Bachelor's in Manufacturing Engineering, Mechanical Engineering, Electrical Engineering, or related field., • 7+ years in manufacturing engineering for complex aerospace or defense electronics hardware., • 4+ years specifically supporting avionics or electromechanical assembly and integration (high-reliability electronics preferred)., • Proficient with 3D CAD (SolidWorks or NX), GD&T (ASME Y14.5), and tolerance stack-up analysis., • Strong experience in precision electromechanical assembly processes, including soldering, crimping, potting, adhesive bonding, and cleanroom/ESD protocols., • Familiarity with ERP/MES systems and manufacturing execution for full aerospace traceability., • Working knowledge of environmental stress screening (ESS), vibration, thermal cycling, and functional test integration for avionics., • Direct work on missile, hypersonic, or high-reliability avionics systems for DoD programs., • Experience in fast-paced defense or space environments (e.g., Anduril or SpaceX), • Background with harsh-environment electronics (high-G, thermal extremes, radiation)., • Track record of implementing automation for electromechanical assembly and achieving significant cost or cycle-time reductions., • Employee Equity: Meaningful equity for all full-time employees - share value has increased 150x in three years, • Personal Time Off: Four (4) weeks of paid time off to unplug, reset, and come back sharp—velocity matters, burnout doesn't, • Company Paid Holidays: Ten (10) company paid holidays, • Medical: We offer plans at 100% employee covered and 80% of dependent coverage, • Dental & Vision: We cover 90% employees and 80% for dependents to ensure you and your family have access to quality preventive and ongoing care, • FSA/HSA: To support long-term health and financial resilience, we offer FSA and HSA options that allow employees to set aside pre-tax dollars for eligible medical and dependent care expenses, • Retirement: 401k plan offered to support long term financial growth along side high-impact, high-velocity work, • Paid Parental Leave: We support growing families with meaningful time to bond and recover. Birthing parents are eligible for up to 10 weeks of paid leave, while non-birthing parents may take up to 4 weeks of paid leave. This time can be used for pre-natal care, pregnancy, childbirth, and related medical needs—ensuring every parent has the support they need during this important life moment.8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees, • Meals & Catering: Frequently catered lunches and team meals, plus company-covered meals when extra time or effort is required, • Snacks & Beverages: Fully stocked kitchen with unlimited snacks and drinks to keep you fueled throughout the day, • Performance & Fitness: $100 monthly fitness stipend to support peak performance and health, both inside and outside of work To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This position may require access to classified information or restricted U.S. Government sites, systems, or information, as determined by the Company and/or applicable U.S. Government requirements. If the position is so designated, your employment in the role may be contingent upon your ability to obtain and maintain the required U.S. Government security clearance or other government authorization, and to satisfy any citizenship or other eligibility requirements imposed by applicable law, regulation, executive order, or government contract requirements. You will be notified if and when such requirements apply. Failure to obtain or maintain any required clearance or authorization may result in reassignment, leave, or separation from employment, consistent with business needs and applicable law. Affirmative Action/EEO Statement Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description Position Summary: The Quality Control Test Technician is responsible for performing acceptance and qualification testing on products to ensure compliance with company and customer requirements. This role involves inspection, testing, documentation, and coordination with cross-functional teams to support quality standards and on-time delivery. Key Responsibilities:Daily Responsibilities: • Perform visual, mechanical, and electrical inspections, • Coordinate with production, engineering, and shipping teams, • Prioritize and schedule products for inspection and testingCore Responsibilities:, • Conduct Acceptance Testing and Qualification Testing, • Set up test equipment and testing environments, • Inspect products and accurately record test data, • Prepare and complete End Item Data Package (EIDP) documentation for customer submissionDecision-Making:, • Independently perform inspections and testing, • Accept or reject products based on quality standards, • Prioritize scheduling for QC inspection and testingEquipment & Tools Used:, • Digital volt meter, • Megohmmeter, • AC/DC Hi-pot tester, • Digital calipers, • AC/DC power supply, • MicroscopeSoftware Knowledge:, • Microsoft AccessQualifications:, • Experience in quality control, testing, or inspection preferred, • Strong understanding of electrical and mechanical testing methods, • Ability to read and interpret technical documents and specifications, • High attention to detail and accuracy, • Ability to work independently and make sound decisions Job Posted by ApplicantPro

Job DescriptionMECHANICAL ENGINEER (SITE INFRASTRUCTURE) Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As a Mechanical Engineer (Site Infrastructure) at Freeform, you will have the unique opportunity to bridge the gap between site infrastructure and next-generation autonomous manufacturing. You will deep dive into the complex mechanical systems that power Skyfall, our proprietary printing platform, ranging from industrial fluid and cooling systems, high-pressure gases, and factory performance monitoring systems leveraging sensors and data acquisition. This work is critical to the ultimate goal of enabling Freeform to deploy and scale its hardware stack globally. You will work alongside an interdisciplinary team of engineers to create custom solutions that ensure Freeform's physical infrastructure is as advanced as the software driving it. The ideal candidate possesses a "no job too big or small" mentality and is a proactive problem-solver dedicated to accelerating the pace of innovation. 3D printing experience is not required to be successful here - we look for leaders who are organized, accountable, collaborative, and motivated to build and scale world-class hardware operations. Responsibilities: • Design and implement custom infrastructure for our next-gen printing system, Skyfall, including state-of-the-art thermal management (chillers), industrial plumbing, and high-flow gas delivery, • Develop and integrate factory performance monitoring systems, leveraging sensors and data acquisition (DAQ) to ensure real-time visibility into utility health, pressure levels, and flow rates, • Oversee critical utilities, ensuring power, process water, and industrial gases like nitrogen and argon are supplied to the Skyfall fleet in strict accordance with safety codes, • Define and implement preventive maintenance for facilities equipment (pumps, compressors, and HVAC) to optimize operational efficiency and minimize system downtime with a pragmatic eye for automation opportunities, • Secure the availability of specialized fluid system components and high-pressure fittings to ensure that infrastructure build-outs and engineering projects always move at the pace of innovation Basic Qualifications: • Bachelor's degree in mechanical or aerospace engineering or similar engineering discipline, • 2+ years of facilities engineering, factory engineering, launch/ground systems engineering or similar experience, • Strong first principles understanding of fluid mechanics, thermodynamics, and heat transfer, • Hands-on ability to troubleshoot and repair complex mechanical and fluid systems Nice to Have: • Experience with Environmental, Health, and Safety (EHS) practices, specifically regarding high-pressure gas safety (NFPA 55) and metal powder handling, • Proficiency in 3D CAD software (SolidWorks, NX, or similar) for designing facility layouts, piping routes, and custom mechanical mounts, • Experience developing infrastructure for high-volume production or scaling automated manufacturing lines, • Hands-on experience with industrial automation controls, PLCs, or building management systems (BMS), • Background in aerospace ground support or rocket engine test site operations involving cryogenic or high-pressure fluid systems, • Experience with new facility buildouts, including managing external MEP (mechanical, electrical, plumbing) contractors, • Knowledge of ITAR, ISO 9001, and/or similar industrial compliance standards, • Experience with metal additive manufacturing or similar powder-based industrial processes, • Excellent verbal and written communication skills with the ability to present technical infrastructure plans to cross-functional teams Location: * Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. * Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $90,000-$150,000. The upper end of the range is reserved for individuals who demonstrate exceptional experience, deep domain mastery, and a proven history of high performance and impact., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionSalary: $38.46 - $57.69 Per Hour DOE Company Overview LD power automation is a leading engineering company specializing in marine and industrial electrical and control services and products. With extensive experience in installation, commissioning, and troubleshooting, we deliver professional and timely solutions that help our clients achieve operational excellence. Our commitment to building strong, long-term relationships is founded on trust and a deep understanding of our clients' needs. For more information, visit our website. Job Summary Were looking for a hands-on Field Service Engineer whos ready to dive into the world of marine and industrial power systems. If you enjoy solving real-world problems, working with your hands, and being the go-to expert when things need fixing or fine-tuning, this might be the role for you. Youll be installing, troubleshooting, and maintaining everything from motors and switchgear to PLCs and control systems aboard large ocean-going vessels while theyre in port. Its a mix of tech, teamwork, and travel, with plenty of variety and challenges to keep things interesting. Youll work closely with customers, vendors, and manufacturers to make sure systems run smoothly and safely. If youre someone who takes pride in doing things right and enjoys working in dynamic environments, wed love to hear from you. Key Responsibilities • Communication between cooperating parties and assist to ensure smooth operation of electrical and mechanical equipment., • Performing maintenance including field installation, validation, and testing of electronic, electric and mechanic components., • Troubleshooting by observing mechanical devices in operation, listening for problems and using electrical meters, calibration equipment, mobile and handheld computer systems, hand tools, PLC, operator interface, data collection, and safety-related control systems., • Remove and replace defective parts by properly dismantling devices using hoists, cranes, and hand and power tools, examining form and texture of parts., • Maintain a safe and clean working environment by complying with company procedures, rules, and regulations. Qualifications • Electrical Engineering Bachelors degree or a combination of a relevant certificates, Associate or Technical degree and 4-5 years of relevant work experience., • Must possess manual dexterity to operate machinery and repair equipment, with the ability to climb ladders, stairs, and lift at least 40 pounds. Should be self-motivated and capable of working independently. Skills & Competencies • Knowledge of low voltage and line voltage AC and DC systems and relays, high voltage experience including terminations a plus., • Basic hydraulic and machine repair knowledge a plus., • Excellent written and verbal communication skills Electrical/Mechanical aptitude, advanced skills in one or more of the following areas a plus: software, electronics, low and high voltage electrical, mechanical and propulsion systems, automation, PLC programming, Ethernet network/Serial communication., • Ability to read Schematics., • Ability to write reports, effectively present information and respond to questions from groups of managers, clients, and customers., • Proficiency in installation, troubleshooting, and commissioning., • Ability to collaborate with clients and ensure timely service delivery., • Must be an avid user of computer software including Microsoft Office., • Ability to work independently and as part of a team. Working Conditions • Working conditions are marine/industrial environments which require the use of company uniform and safety equipment, to include but not limited to safety glasses, hearing protection, steel toe work boots, hardhat and safety vests., • Available to work flexible, on-call hours, including varying and unpredictable shift schedules., • Regular local travel with occasional international trips as required. Other • Must be able to pass a drug screening and background check upon request for customer site access. A clean driving record is required., • As our business and operations evolves to meet changing market needs, team members are expected to adapt seamlessly and undertake additional essential projects and tasks when required. Compensation & Benefits LD power automation provides competitive compensation and benefits to acknowledge employees contributions. Base pay is determined by job-related knowledge, skills, experience, location, and internal equity considerations: • 401(k)/Employer Matching, • Health, Dental, and Vision Insurance, • Paid Time Off

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Propulsion team at Relativity is focused on developing and delivering highly performant and manufacturable engines for Terran R. Engineers are responsible for the entire lifecycle of their parts, from initial design through production to qualification and flight. The team fosters a culture of bottoms-up decision-making, free from technical gatekeeping, where ownership and accountability are key at all levels. But designing engines with a quarter million pounds of thrust is just the beginning. As the flight configuration enters qualification, the team is now exploring modifications for future engines, including thrust upgrades, new cycles, and design for mass production. About the Role: As the Manager of Turbomachinery Engineering, you will lead the team through the design, analysis, and development of all of Relativity's turbomachinery products. This role will require managing a large team, spanning many highly technical disciplines. You will be responsible for shaping how turbomachinery is designed, developed, and evaluated at Relativity, setting team and department-wide roadmaps to support the development of Terran-R. To be successful in this role, you should be capable of leading collaborative projects to completion with minimal oversight and supporting your team in doing the same. You should be a self-starter who is always looking for ways to improve yourself and your team, while also being willing to learn from both your peers and direct reports. You should be someone who cares deeply about the people on your team & is invested in their growth. Along with these high expectations comes the opportunity to have a significant influence on a fast-growing startup company and to make rapid professional gains in an environment that encourages growth and risk. About You: • Bachelor's degree in a science, engineering, technology, or mathematics field, • 8+ years of relevant engineering experience in a complex system development environment, • Experience leading and developing a high-performing engineering team by driving technical excellence, fostering talent growth, managing performance, and leading recruitment efforts, • Experience with turbomachinery development, • Experience applying fluid, thermal, structural, and mechanical design fundamentals, • Masters or doctorate degree in a relevant technical field, • Experience with Finite Element Analysis (FEA) and associated commercial tools, • Experience with Computational Fluid Dynamics (CFD) and associated commercial tools, • Experience with computer aided design (CAD) software, • Experience designing and analyzing turbomachinery components including inducers, impellers, turbines, diffusers, bearings and seals, etc., • Experience developing turbopumps for liquid propulsion rocket engines Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$160,000—$220,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by $450M from leading investors including Altimeter Capital, Redpoint Ventures, T. Rowe Price, Lightspeed Venture Partners, Alpine Space Ventures, and others – with an additional $500M in signed contracts across commercial and US government customers – we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches planned through 2026 and 2027, we're Building Bigger to develop the solar system and become a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a groundbreaking Series C space startup, we'd love for you to apply. The Role You will be responsible for system design, analysis, testing and integration of avionics on some of the largest, most powerful, rapidly designed and manufactured satellites. You will have the unique opportunity to collaborate with a cross functional team of engineers to make impactful architecture trades, design new spacecraft hardware, and manage the overall avionics system implementation. You will be the Responsible Engineer for Avionics interfacing, harnessing, instrumentation, RF components, and GNC actuators. You will help establish production test requirements and support vehicle avionics integration to enable high-rate production and constellation launch cadence. In your first two years, you will have qualified hardware for flight, completed avionics integration on the satellite bus, and flown your first spacecraft. Responsibilities • Serve as Responsible Engineer for Avionics system design, performance, and hardware across the computing, power system, instrumentation, RF components, GNC sensors, and harnessing on the satellite bus, • Collaborate closely within the cross functional Engineering teams to capture requirements, lead design trades, and integrate the design into the spacecraft systems, • Create and update technical documentation including system diagrams, schematics, interface control documents, procedures, test/anomaly reports, • Execute Avionics component and system testing on flight hardware through development acceptance, qualification, and integration testing, • Support spacecraft integration testing, production issue dispositions, troubleshooting failures, and managing overall spacecraft risk, • Design, develop and build Avionics production infrastructure, • Write modular, reusable test, analysis, and automation software in Python and Rust, • Bachelor's degree in aerospace, mechanical, or electrical engineering or any equivalent combination of education and experience, • 2+ years of experience in the documentation, development, testing, and integration of space-grade avionics systems, • Ability to work in a fast-paced and high velocity start-up atmosphere, • Hands-on experience with environmental testing for space electronics and harnessing such as thermal, thermal vacuum, vibration, shock, radiation, and EMI/EMC testing per SMC-S-016, • Competence with electrical test equipment (multimeters, oscilloscopes, network analyzers, etc.), • Strong presentation experience in highly technical design forums and reviews (Preliminary Design Reviews, Critical Design Reviews, Flight Readiness Reviews, etc.), • Proficient with NX or similar CAD software including electrical harness routing, • Expertise in PCB schematic capture and board layout, ideally using Altium or similar software, • Experience with Linux, Bash, C++, MODBUS, • Base salary range for this role is $100,000 - $150,000 + equity in the company, • Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. § 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Structures and Mechanisms team is responsible for the full design, build, and test lifecycle of Terran R's integrated structures and flight mechanisms. Whether you're working on highly iterative mechanisms that move or tight-margin structures that shouldn't, you'll get hands-on hardware ownership and see the rocket coming to life on the factory floor. Both teams fall under one department, sharing design principles, tools, and an integrated approach that provides a comprehensive view of Terran R. Team members work on multiple parts, not just within a single subsystem, and are empowered to make decisions that directly impact flight hardware. Beyond first flight, you'll play a critical role in refining for manufacturability and speed. About the Role: The scope of work encompasses a full design cycle, including conceptualization, design, analysis, manufacturing and testing for primary and secondary structures related to Thrust Structure, Propellant Tanks, Interstage or Fairing, to name a few. You will need to think creatively and leverage innovation to reduce mass, parts, processes and tooling required. Your responsibilities will include, but not be limited to the following: • Innovative conceptualization of structural load path, design for complex structures and adjacent system packaging, • Review of static & dynamic load inputs, material properties & test as well as structural systems & subsystems requirements, • Analysis and sizing of flight structures to ensure timely design reviews and drawing release, • Develop and support hardware test campaigns, including test integration, operation and result evaluation On a weekly basis, you will be designing flight components for our upcoming Terran R vehicle using NX/TeamCenter, performing analysis using Nastran, ANSYS and/or hand calculations, creating and releasing drawings as well as supporting fabrication of your components. You will own your design from requirements to production. You will also use your strong organizational skills to properly document your work and present your recommendations when decisions are needed. About You: • 5+ years of experience in a design engineering role, • Bachelor's degree in Engineering or related technical discipline, • Experience with industry-standard CAD packages such as NX, Creo, or Solidworks, • Working knowledge of structural analysis (hand calculation, Finite Elements Methods and industry tools) and test, • 5+ years of mechanical or structural design & analysis experience, • Experience with NX/TeamCenter, • Experience using Nastran and ANSYS Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$132,000—$181,500 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Stage Manufacturing team turns design into reality, owning the build of Terran R's primary structures. This isn't about turning the same bolt every day; it's about building the systems to build the rocket. Engineers and technicians work side by side, with deep collaboration and real-time feedback, to shape how we build better and faster. With a manifest and a launch date, it's up to the team to deliver on Terran R: solving challenges in real time, optimizing for scale, and constantly improving processes. As the vehicle evolves, so will the factory, with opportunities to apply automation, machine learning, and advanced technologies. What we build here sets the blueprint for the future of scaled launch. About the Role: • Design and commission new test assets and systems to unlock new test capabilities or enhance existing ones while working closely with design and manufacturing partners to ensure the successful execution of production testing campaigns that are both efficient and scalable over time., • Author and optimize test sequences, plans, procedures, and operational processes to support first-article development and transition into high-volume production., • Analyze data to evaluate assembly performance and disposition recurring testing discrepancies and support multi-disciplinary teams on root cause analysis and corrective actions., • Define and standardize operational requirements and processes to improve safety, data quality, and test repeatability., • Support workcenter development by considering assembly and test operations, safety, tooling and capital equipment requirements, and company operational goals., • Bachelor's Degree or higher in Aerospace, Mechanical, or Electrical Engineering; or other related discipline., • 5+ years of relevant technical experience, including (but not limited to): Authoring and executing test plans and procedures on complex high-pressure pneumatic and high-voltage electrical systems; High-pressure pneumatic leak checks, sensor checkouts, high-voltage electrical system checkouts, integrated system testing; Designing and commissioning pneumatic and electrical test equipment; Leading failure and anomaly investigations, resolving non-conformances, and driving root cause analysis with corrective actions implemented effectively, • Strong understanding of and ability to apply engineering fundamentals in fluid, thermal, mechanical, and electrical engineering., • Demonstrated knowledge of safety standards, common test hazards, and appropriate mitigations., • Experience in a fast-paced and lean environment, including direct vendor engagement, tool development, or leading a small team through an ambiguous build or test effort, • Familiarity with industry test standards: e.g., SMC-S-016, MIL-STD-1540D, and MIL-STD-810G., • Knowledge of launch vehicle components such as regulators, check valves, orifices, and electromechanical and pneumatically actuated valves Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$130,000—$178,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at .

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose The Automation Engineer supports the daily operations across all of our Robotic Work Centers, including Assembly, Part inspection, Anodize, & post processing lines, for Divergent's flexible robotic manufacturing systems, core to the Divergent Adaptive Production System (DAPS). The ideal candidate will use their expertise in automated systems, industrial robotics, and off-line programming to maintain & generate robotic programs for production parts and ongoing internal projects, while working with cross-functional teams to capture and implement process improvement. Divergent is pushing the boundaries of technology and we need a passionate and agile engineer to help us create the platform for sustainable manufacturing. The Role As an Automation Engineer on the Advance Manufacturing team, you will be at the forefront of implementing advanced automation and robotics systems in our production environment. You will support the day-to-day operations; help refine processes and enable scalability. This role is hands-on, fast-paced, and essential to delivering high-precision, high-reliability hardware across automotive, aerospace, and defense programs. • Create Simulation Studies in Process Simulate on Teamcenter (Tecnomatix), • Help create and maintain customer product manufacturing data for automated work centers., • Help maintain kinematic libraries of hardware systems in robotic simulations, • Generate optimal assembly sequences and validate feasibility, • Perform reach & access studies and validate assembly sequence logic and interference-free robot motions., • Program robots and automated systems to perform specific tasks and functions, • Troubleshoot and resolve any issues with existing automation systems to ensure smooth operation., • Help create and maintain documentation for all automation and robotics systems, including specifications, manuals, and training materials., • Train and mentor other team members on the operation and maintenance of automation and robotics systems, • Continuously monitor and analyze data from automation systems to identify areas for improvement and recommend solutions., • Provide insight, data, & learnings to our development team to help inform our next generation robotic platforms., • Collaborate with suppliers and vendors to procure necessary equipment and components for automation projects, • Adhere to all safety protocols and regulations while working with automation and robotics systems Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's Degree in Mechatronics or Mechanical Engineering or equivalent discipline, a Strong Foundation in Engineering Principles and Theory, • 1+ years performing Robotic Simulation studies for industrial robotic systems or 3+ years of hands-on programming of industrial robotic manipulators, • 3+ year experience operating industrial robots: Kuka, ABB, FANUC, Yaskawa, • Proficiency In CAD (preferable NX) and Simulation Tools., • Must Be Able to Identify and Resolve Issues Quickly and Efficiently, Using Data-Driven Approaches and Critical Thinking Skills., • Strong communication and collaboration skills, able to work effectively with other technicians, engineers, and project teams., • Capable of working autonomously within the focused area., • Ability to lift up to 50lbs, • Ability to climb up and down ladders Preferred Qualifications, • 3+ years of Robotics Simulation work, • Experience with generating and optimizing collision-free robotic motion paths and processes, • Experience with analysis and optimization of robotic system layouts and processes, • Experience with manufacturing automation in automotive or aerospace environments, • Applications experience with robotic material handling, assembly, vision systems, adhesive systems, material removal, welding, or fastening Work Environment, • Working near moving mechanical parts, • This is a hands-on position that will require standing for long durations of your day and working directly with hardware on the floor., • Must be comfortable stooping, bending, and standing., • Engineer II / E04: $122,430 - $168,340, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionPRINCIPAL SIMULATION ENGINEER Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As a Simulation Engineer at Freeform, you will be responsible for developing physics-based, data-driven models that enable the first production scale, high quality, and fully automated metal 3D printing factory capability. We are looking for someone with deep knowledge in physical simulations and multi-physics phenomena who can develop sophisticated models from scratch for undefined or previously unsolved problem statements. This person needs to be comfortable working in an interdisciplinary environment that iterates quickly and decisively. 3D printing experience is not required to be successful here - rather we look for smart, motivated, collaborative engineers who love solving hard problems and creating amazing technology! Responsibilities: • Develop high-performance numerical solvers for simulating the physics of advanced metal 3D printing systems., • Implement numerical simulation models for real-time or near-real-time performance on HPC or GPU platforms., • Work with software engineers to build and deploy physics-based and data-driven models of the laser powder bed fusion process., • Work with software engineers to integrate low-level solvers into simulation pipelines and interface with hardware systems., • Guide the integration of computational geometry and meshing techniques to support large-scale, physics-driven simulations., • Architect simulation modules for execution on specialized compute hardware including FPGAs and GPUs., • Contribute to the development of model-predictive control strategies alongside control engineers., • Generate and maintain documentation for all algorithms, solvers, and integrated system Basic Qualifications: • Bachelor's degree in applied mathematics, physics, computer science, mechanical engineering, or a related technical field., • 10+ years of professional experience developing custom simulation solvers with a PhD in one of the above fields., • Demonstrated experience writing low-level numerical solvers for physical simulations., • Strong programming skills in C, C++, or CUDA., • Experience developing simulations in a high-performance compute environment (i.e. running on GPUs)., • Academic or professional familiarity with solid mechanics, continuum mechanics, or other physical modeling domains. Nice to Have: • Experience with real-time or near-real-time simulations on GPU or parallel computing platforms., • Experience with direct numerical simulation (DNS) models, • Familiarity with solid mechanics, continuum mechanics, or other physical modeling domains., • Experience with thermo-elastic or thermo-elastoplastic modeling., • Familiarity with computational geometry and meshing techniques., • Experience with data-driven modeling techniques and hybrid physics/data simulation methods., • Familiarity with optimization techniques and control theory., • Experience with 2D and 3D meshing libraries and tools., • Creative problem solver with a strong foundation in first-principles thinking and numerical analysis., • Strong written and verbal communication skills. Location: * Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. * Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $225,000-$300,000. However is this a unique position with outsized impact for the right game-changing hire, so we will consider compensation outside of this range on a case-by-case basis., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Company Overview Rangeview builds advanced investment casting foundry systems for aerospace, defense, and energy applications. We combine modern automation, software-driven process control, and materials science with hands-on foundry execution to deliver complex castings faster, more consistently, and at scale. Job Summary As a Production Manager you will lead the hourly foundry operators responsible for the full investment casting process from pattern production, to pouring, to post-processing. This isn't a desk-based management role; we are looking for a leader with a high degree of tenacity for hands-on, gritty operational work who can navigate a technical manufacturing landscape and has lived on the factory floor taking personal accountability for safety, quality, delivery, and yield. You will set the operating cadence of the foundry while building the team, processes, and discipline required to scale. This position's internal job code is Manager, Production. We are currently hiring for Level 4. Responsibilities • Serve as the individual accountable for foundry operations across multiple shifts, • Establish the organizational structure and recruit requisite personnel to build a world-class team of Operations Technicians, • Establish the shift cadence, ensuring the team meets safety, quality, delivery, and cost metrics, • Own onboarding and training programs for the hourly foundry operators, establishing a culture operational excellence via effective development and application of each individual's skills, • Manage operational improvement initiatives to eliminate hazards, prevent non-conformances, reduce lead time, and drive down cost by challenging requirements and applying creative thinking, • Set and champion organizational policy and standards that enable production autonomy, foster an environment of continuous improvement, and maintain compliance with regulatory requirements, • Advocate for the operators and ensure their perspective and feedback is represented across all aspects of the business, from day to day tasks to executive strategy and planning, • 4+ years of experience in manufacturing, mechanical, electrical, or test engineering in aerospace, automotive, or commercial industries, • 2+ years of experience directly managing non-exempt manufacturing personnel in aerospace, automotive, or commercial industries, • Strong written and verbal communication skills, • Proven track record of inspiring operators, building consensus across cross-functional teams to overcome operational blockers, and driving complex initiatives to completion on budget and schedule, • Demonstrated ability to scale production throughput in a high volume manufacturing setting, • Familiarity with aerospace or defense manufacturing quality systems, • 4+ years of experience directly managing non-exempt manufacturing personnel in aerospace, automotive, or commercial industries, • Bachelor's degree in an engineering discipline Please note that the salary information shown below is a general guideline. Salaries are based on demonstrated candidate experience and qualifications, as well as market and business considerations. Rangeview offers a competitive benefits package, including equity, unlimited PTO, medical, dental, and vision insurance. Compliance Rangeview is a DDTC-registered, ITAR-compliant business. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Rangeview is an Equal Opportunity Employer; employment with Rangeview is governed on the basis of merit and aptitude and will not be influenced in any manner by any legally protected status.

Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. Join Us in Advancing Tube & Piping Systems We are building advanced pipe and tube manufacturing capabilities by integrating forming, cutting, joining, and inspection into a tightly controlled production system. From raw tube processing through bending, end forming, welding, and validation, we treat tube fabrication as a precision-driven discipline where geometry, cleanliness, and joint integrity are critical. We are solving complex challenges in bend accuracy, weld quality, flow integrity, and scalable production. This requires engineers with deep expertise in tube processing and system-level integration. This is a general opportunity to engage pipe and tube engineers with specialized experience across key process areas. Core Specialty Areas * Tube Forming & Bending: CNC tube bending, bend sequencing, springback compensation * End Forming & Fittings: 37-degree flaring, end prep, fitting integration * Cutting & Preparation: Laser cutting, coping, beveling * Joining & Welding: Orbital welding, weld parameter control for tube systems * Cleaning & Contamination Control: Gross cleaning, cleanliness standards for fluid systems * Inspection & Metrology: CMM, 3D scanning, dimensional validation of complex tube geometries * Material Handling & Production Systems: VLM (vertical lift modules), tube storage, workflow optimization What You’ll Do * Develop, qualify, and optimize tube fabrication processes for accuracy, repeatability, and throughput * Control key variables (bend radius, ovalization, wall thinning, weld integrity) to ensure system performance * Partner with manufacturing, quality, and design teams to ensure reliable tube assemblies * Lead root cause analysis for defects such as distortion, leakage, and dimensional nonconformance * Create and maintain process documentation, routing, and standard work What We’re Looking For * Degree in Mechanical Engineering, Manufacturing Engineering, or equivalent hands-on experience * Demonstrated expertise in tube/pipe fabrication processes (bending, welding, or end forming) * Strong understanding of material behavior during bending and forming * Ability to interpret technical drawings, routing diagrams, and GD&T * Experience in production environments with tight tolerances and quality requirements What Will Set You Apart * Experience across full tube lifecycle (cutting → bending → welding → inspection → cleaning) * Familiarity with high-purity or high-pressure fluid systems * Experience with automated tube processing and production line integration * Background in aerospace, energy, or other high-reliability systems Benefits * Medical, dental, vision, and life insurance plans for employees * 401k * Relocation support may be provided for certain situations, based on business need. * Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Hadrian Is An Equal Opportunity Employer It is the Company’s policy to provide equal employment opportunity for all applicants and employees. The Company does not unlawfully discriminate on the basis of race inclusive of traits historically associated with race (including, but not limited to, hair texture and protective hairstyles, such as braids, locks and twists), color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, transgender status, national origin (including, in California, possession of a drivers license), ancestry, citizenship, age, physical or mental disability, height or weight, medical condition, family care status, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, exercise of reproductive rights, any other basis protected by local, state, or federal laws, or any combination of the above characteristics. When necessary, the Company also makes reasonable accommodations for disabled candidates and employees, including for candidates or employees who are disabled by pregnancy, childbirth, or related medical conditions.

Job Description About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We're designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts. Senior Supply Chain Planner As the Senior Supply Chain Planner, you will be integral in working with the cross-functional groups defining, designing, building, and testing Castelion vehicle and missile subsystems. This role requires an established supply chain professional with breadth to engage with engineering to execute the necessary program sourcing strategies to align with short term development schedules and long-term sourcing focus for low cost, sustainable supply chain plans. We seek intelligent, collaborative, and driven leaders who are passionate about problem-solving and eager to lay the groundwork for a team to contribute to an extraordinary mission. If you thrive in challenging environments and are excited by the prospect of making a tangible impact, we want to hear from you. Responsibilities • Support the development and execution of production strategies, working with the strategic sourcing, engineering and program teams to ensure reliable supply for upcoming product launches., • Assist in evaluating and selecting supply plans based on quality, reliability, and cost-effectiveness to maintain a robust supply base capable of Castelion's rapid development and production., • Load and report on supply plans based on a master schedule set in a Material Requirements Planning engine., • Collaborate with key stakeholders to improve quality, reduce costs, and enhance service levels while addressing risks and compliance requirements., • Forecast spend, supply, and infrastructure requirements through close collaboration with business stakeholders and operations plans., • Collaborate with engineering and quality teams to address and resolve issues with rejected materials, aiming to prevent future quality problems., • Provide regular updates to key stakeholders on critical supply issues through Clear to Builds., • Support onboarding and training of new planners., • 5+ years of experience working in a related field, program, or project, • System Experience: Experience with MRP or ERP systems, and with managing bill of materials, work orders, and purchase orders, and the total ownership of the data within them., • Technical Skills: This role requires broad mechanical domain knowledge, including machined parts, composites, chemicals, avionics and their associated manufacturers and manufacturing methods., • Problem-Solving: Innovative problem-solving approach using critical thinking, including utilization of learnings from an American Production and Inventory Control Society (APICS) certification, Six Sigma certification, or similar certifications and data analysis using Excel, SQL, or an advanced analytics software., • Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support., • High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. All employees are granted long-term stock incentives as part of their employment at Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Job DescriptionSENIOR ADDITIVE MANUFACTURING DEVELOPMENT ENGINEER Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. As a Senior Additive Manufacturing Development Engineer at Freeform, you will play a critical role in the development of our advanced printing technology including machine functionality, part quality, automation projects, and complex print file preparation. You will own projects cradle to grave as a responsible engineer, taking customer designs from concept through printing, testing, and delivery. You will also contribute to the overall machine system architecture with a key focus on automation by developing a fundamental understanding of the printing factory and leveraging your technical insights to advance system capabilities. Responsibilities: • Understand printing system capabilities and roadmap, and work with internal engineering teams (mechanical, electrical, software) to implement solutions that further automate the printing process for high volume production, • Drive all stages of print production development including file preparation, printing, post processing, and quality control, • Analyze in-situ data and post-print part quality to drive continuous improvement, • Use first-principles thinking to understand problems, define test methods, evaluate solutions, iterate and provide technical recommendations to internal and external stakeholders, • Document application requirements and objectives, statements of work, standard operating procedures, next steps and action items to align all internal and external team members, • Interface with external customers to communicate Freeform's technical capabilities; work with customers on improving Design for Additive Manufacturing (DFAM), • Contribute to Freeform's internal technology development with feedback from internal and external stakeholders via detailed design and systems level improvements Basic Qualifications: • Bachelor's degree in mechanical engineering or similar technical discipline, • 5+ years of professional experience with additive manufacturing, • 2+ years of professional experience with direct metal laser sintering (DMLS), • Experience with print file preparation, • Experience with DFAM and CAD software Nice to Have: • Master's degree in mechanical engineering, materials engineering, or similar technical discipline, • Process development experience for metal additive manufacturing, • Scripting experience in Matlab (or similar) for toolpath generation, • Experience working with internal and/or external customers, • Mechanical systems design experience, • Detail oriented with excellent verbal, graphical, and technical communication skills, • Demonstrated creative problem solving abilities and positive attitude Location: * Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. * Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $110,000-$200,000. The upper end of the range is reserved for individuals who demonstrate exceptional experience, deep domain mastery, and a proven history of high performance and impact., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionLEAD APPLICATIONS ENGINEER (SEMICONDUCTOR) Freeform builds AI-native manufacturing systems that unify software, hardware, and physics to produce industrial-scale parts at the speed of human ideation. By treating manufacturing as a single integrated system, we unlock a new era of innovation where complex hardware is designed, built, and scaled without limits. Freeform is hiring a Lead Applications Engineer to serve as the primary technical interface between Freeform and a portfolio of our semiconductor customers. This person will apply their technical background and intimate understanding of semiconductor fabrication systems and equipment to translate real engineering problems into manufacturable solutions that only Freeform's technology can unlock. You will own the technical relationship with customers, guide them through application discovery and feasibility, and help shape how Freeform's manufacturing platform is deployed across some of the most ambitious programs in the industry. The ideal candidate comes from a strong engineering background, understands complex semiconductor systems, and is comfortable engaging directly with senior engineers and decision makers at highly sophisticated and cutting-edge organizations. This person should be comfortable leading deep technical discussions across performance, manufacturability, materials, qualification, and production tradeoffs, and translating those conversations into a broader, programmatic vision that helps customers understand how Freeform's technology can unlock entirely new design and production possibilities. Responsibilities: • Serve as the primary technical point of contact for a portfolio of strategic semiconductor equipment customers, • Lead deep technical discussions with customer engineering teams across applications such as:, • Wafer handling, robotic end-effectors, and vacuum-compatible armatures, • Thermal management hardware and high-precision cold plates, • Ultra-high vacuum (UHV) chambers and internal components, • Gas delivery manifolds and high-purity fluid systems, • Lithography tool structural components and precision optics mounts, • Pedestals and showerhead assemblies for deposition tools, • Develop a deep understanding of customer system requirements, constraints, and performance drivers, • Translate customer needs into manufacturable solutions using Freeform's technology, including geometry, materials, tolerances, and production considerations, • Clearly articulate what Freeform's manufacturing platform can and cannot deliver, including tradeoffs and constraints, • Independently answer advanced technical questions related to materials, processes, qualification pathways, and production scalability, • Identify where Freeform's technology enables new designs, architectures, or performance regimes that were previously impractical or impossible, • Work closely with internal engineering and operations teams to align on feasibility, execution, and roadmap - but without depending on them for basic technical credibility, • Guide customers through early application exploration, development phases, and transition into production, • Build long-term, trust-based technical relationships with customer engineers, program managers, and technical leadership, • Provide feedback from the field to influence Freeform's product, process, and roadmap decisions Basic Qualifications: • Bachelor's degree in engineering or similar technical discipline, • 5+ years of experience in an engineering, program management, or leadership role within the semiconductor equipment/fabrication industry, • Strong systems-level understanding of complex mechanical hardware and how components function within larger assemblies Nice to Have: • Prior experience in a customer-facing technical role such as applications engineering, systems engineering, or field engineering, • Ability to clearly communicate complex technical concepts to both engineering and non-engineering stakeholders, • Familiarity with metal manufacturing processes, including additive manufacturing, casting, forging, or advanced machining, • Experience supporting hardware through development, qualification, and production ramp, • Strong intuition for design-for-manufacturing and production scalability, • Strategic thinker with a strong business acumen, • Team player, positive attitude, growth mindset, integrity, accountability, adaptability, entrepreneurial, driven, results-oriented and ethical Location: * Based in Hawthorne, our vertically integrated facility brings technology development, R&D, and production together under one roof. We operate at the center of LA's deep tech ecosystem, surrounded by some of the most ambitious hardware innovation happening anywhere in the country. * Our fast-paced, cross-functional environment is built on close collaboration, and as such, this role requires full-time onsite presence (five days a week), with very limited exceptions. What We Offer: • We have an inclusive and diverse culture that values collaboration, learning, and making deliberate data-driven decisions., • We offer a unique opportunity to be an early and integral member of a rapidly growing company that is scaling a world-changing technology., • Benefits, • Significant stock option packages, • 100% employer-paid Medical, Dental, and Vision insurance (premium PPO and HMO options), • Life insurance, • Traditional and Roth 401(k), • Relocation assistance provided, • Paid vacation, sick leave, and company holidays, • Generous Paid Parental Leave and extended transition back to work for the birthing parent, • Free daily catered lunch and dinner, and fully stocked kitchenette, • Casual dress, flexible work hours, and regular catered team building events, • Compensation, • As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process. Our intent is to offer a salary that is commensurate for the company's current stage of development and allows the employee to grow and develop within a role., • In addition to the significant stock option package, the estimated salary range for this role is $120,000-$185,000. The upper end of the range is reserved for individuals who demonstrate exceptional experience, deep domain mastery, and a proven history of high performance and impact., • Freeform is an Equal Opportunity Employer that values diversity; employment with Freeform is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionSalary: $95,000 - $148,000 PGH Wong Engineering, Inc. has a proud and lengthy history of delivering innovative, challenging, and complex projects. PGH Wong was established in 1985 on its extraordinary foundation in systems engineering and is now a full-service engineering, architecture, construction management, and program/project management consulting firm for public and private entities across the nation. This Mechanical Electrical Plumbing (MEP) inspector position will be based in West Los Angeles and on project sites in the area. Responsibilities include but are not limited to the following: • Visits construction sites and inspects each stage of construction up to completion. Interpret plans, specifications, and codes (general and specific to MEP) and verify that contract work is performed in accordance with them. Assist in obtaining approved designs and permits from utility companies for services to construction sites., • Monitor construction sites for safety violations. Prepares Non-Conformance Reports when work is not performed to the approved standards. Maintains daily activity logs and reports., • Review or prepare interim progress reports for contractor payments. Monitor contractor testing activities. Prepare reports on labor, material, and equipment on site. Determine construction conforms to plans and specifications; if not, issue Non-Conformance Reports for corrective action., • Assist in maintaining, supporting, and promoting a safe work environment while complying with the projects safety rules, policies, and procedures., • Coordinates preparation of inspection cost estimates and maintenance records., • Arranges, coordinates, and oversees technical inspections such as electrical, mechanical, landscaping, soil testing, concrete, and asphalt mixes, and reinforcing steel for conformance to specification requirements., • Coordinates test laboratory activities and compares verifications of test results with results from the contractors laboratory., • May allocate inspection resources and supervise inspectors., • Attends various meetings as needed., • Perform other duties as may be required. Qualifications and Experience: • Approximately five (5) years of MEP rail inspection experience for Associate positions, approximately ten (10) years of experience for Senior and Lead positions which reflect a progressively increasing level of responsibility on complex projects as a General Contractor, Building Construction Supervisor, Building Inspector of large commercial or industrial construction projects, heavy construction projects, transportation, or transit construction projects for the appropriate disciplines including utilities, civil, architectural, structural, electrical, mechanical and trackwork., • ICC Certificate of Reinforced Concrete or Masonry, ACI Registered Contraction Inspector License, comparable Deputy Inspection License for a county or city agency. NICET certification, or other alternative certification form an acceptable nationally recognized organization, is highly desirable where applicable to the Inspection of that particular trade., • Knowledge of OSHA safety regulations and Cal-OSHA/OSHA 30 training certification, or will obtain certification., • Able to read plans and have a good understanding of project specifications., • Must be able to interpret and implement company-mandated safety policies. Skills and Competencies: • Must be able to submit written reports and documentation., • Good organizational skills., • Good Computer skills. We are an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including race, color, sex, gender, age, disability, religion, national origin, political belief, veteran status, sexual orientation, gender identity, domestic partner status, marital status, disability, weight, height, or AIDS/HIV status.

Job Description Position Summary The Quality Inspector III role is responsible for the day to day recording and validation of material between customers, vendors and operations. Essential Duties and Responsibilities • Inspects materials and products, for conformance to specifications, • Inspects finished product for quality and customer requirements., • Inspects finished or in-process fabricated or mechanical parts, equipment and assemblies of a complex nature and determines acceptance or rejection., • Carry out policies and procedures for testing and evaluating product., • Responsible for operating mechanical and electrical test equipment., • Working to Standard Operating Procedures (work instructions), • Assists in recording of Non-conformities of parts/product., • Assisting in the controlling/segregating of conforming vs. non-conforming parts /product, • Evaluates parts or assemblies against standards, blueprints, engineering, and specifications, • Leads and directs the work of others and assists in the training of less experienced inspectors., • Work safely at all times and report any unsafe conditions or injuries to your Supervisor or Manager immediately., • Ability to operate a CMM., • Assists in the training of less experienced inspectors., • Other duties, as assigned by supervision or management., • Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others., • Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions., • Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience: • 7-10 years of experience in the field or in a related field., • High school diploma or GED, and up to one year work experience., • Strong and extensive experience with portable and fixed CMM inspection equipment Knowledge • Extensive knowledge and experience in all areas of inspection., • Familiar with a variety of the field’s concepts, practices, and procedures., • Ability to perform calculations utilizing arithmetic such as addition, subtraction, multiplication and division normally attained through elementary school education., • Ability to perform calculations utilizing algebra and fractions., • Must be proficient in MS Office (Excel, Word, PowerPoint, and Outlook), • Must be proficient in PCDMIS and/or VDMIS., • Excellent communication skills, oral and written., • Ability to communicate simple facts with courtesy and clarity. The employee must occasionally lift and/or move up to 25 pounds. • The employee is frequently required to reach with hands and arms., • The employee is occasionally required to stand; walk and stoop, kneel, crouch, or crawl., • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Job Description Overview The Assistant Project Manager will work with an existing project team, involved in current construction projects. The Assistant Project Manager will assist a Project Manager and continue their development under the direction of CSI. Successful candidates must have a minimum of three years of experience as a Project Engineer and display company core values as found in the CSI Orientation Packet. Company Overview Founded in 1990, CSI has emerged as a leader in highly technical and innovative electrical design and construction. We are a full-service firm with the resources and expertise to handle any commercial, industrial, or one-of-a-kind challenge. We are a trusted contractor to diverse industries, such as aerospace, biotech/pharmaceutical, education, healthcare, entertainment, hospitality, manufacturing, and retail, to name a few. Our services also include energy solutions and have earned a reputation as a premier provider of energy development, installation, and maintenance. In July 2019, CSI proudly joined the MYR Group family expanding our commercial and industrial reach. We’re proud to celebrate 31 years of commitment to do all things with excellence for our customers, ourselves, and our craft. We Build Better. Essential Functions • Understand and follow CSI policies and procedures, • Manage document control and drawings, • Prepare submittals and shop drawings, and review quoted items and commodities, • Compose CSI RFIs, manage RFI logs, and review RFIs for cost impact, • Manage POs, vendor tracking, and releases, • Assist with electrical take-offs and project estimating of large jobs, • Work with the pre-fab department on an as-needed basis, • Provide field foremen with information, material tracking, and other administrative functions, • Summarize and track time and material paperwork, • Take ownership and accountability for assigned tasks, • Manage and track subcontracts, • Assist Project Manager(s) with reports and job schedule review, • Perform job closeouts and O&MsThe preceding functions have been provided as examples of the types of work performed by employeesassigned to this job classification. Management reserves the right to add, modify, change, or rescind workassignments and to make reasonable accommodations as needed.This position is classified as exempt meaning more than 50% of the employee’s time is spent performing exemptjob duties consistent with this job description. If the employee finds the actual job duties change from thosedescribed herein, so the employee is not performing exempt duties more than 50% of the time, the employeemust immediately inform management. Responsibilities Qualifications • High School Diploma or the equivalent, • AA/BS in Construction Management, Business, or Engineering (or soon to graduate) (*), • Estimating experience: Accubid preferred, • Proficiency in MS Office Suite, BlueBeam, and understanding of AutoCAD and Revit, • Proactive attitude, showing initiative and the ability to work independently, • Ability to read and understand Architectural, Structural, Mechanical, Electrical, and Plumbing drawings, • Ability to take ownership and accountability, • Excellent reasoning ability, • Strong organizational and communication skills, both written and verbal, • Ability to work under pressure and adapt to changing job requirements, • Dependability and punctuality for all CSI activities, • Ability to work in a team environment and display leadership skills, • Frequently works outdoors on uneven surfaces., • May be required to sit or stand for long periods of time., • Works in a climate controlled environment 50% of the time., • May work in varying weather conditions: hot, cold, and wet conditions., • Frequently works in areas with large industrial equipment subject to high noise levels., • May occasionally work in areas with hazardous chemicals. Qualifications Compensation & Benefits • Salary $74,000-$125,000/ year, • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. CSI reserves the right to adjust ranges depending on the selected candidate's qualifications., • Amazing Company Culture - We have a culture of trust, teamwork, performance, and commitment that drives our success., • Competitive Salaries - We pride ourselves on offering above-average industry salaries based on talent and experience., • Annual Paid Time Off starting at 15 days plus 9 paid Holidays., • Generous 401(k) Plan with 100% match up to 6%. Immediate vesting and Annual profit-sharing potential., • Company-paid life, and accidental death & dismemberment., • Employee Assistance Plan (EAP)., • Various voluntary plans are available, including short- and long-term disability, supplemental vision, accident, hospital and critical illness, and additional voluntary life insurance plans for employees and dependents. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.

Job Description Overview The EPC Estimator, as part of the Renewables Preconstruction Team, will be responsible for managing, planning, coordinating, and controlling the estimating process for all assigned projects efficiently, while delivering on promises to customers and colleagues. This position also directs and supervises the activities of each project to ensure quality and accuracy, while confirming all estimates and RFP’s are fulfilled. Company Overview Since 1990, CSI Electrical Contractors, Inc. (CSI Electric) – a subsidiary of MYR Group Inc. – has been a leader in highly technical and innovative electrical design and construction. Our team of consultants, engineers, project managers, and professionals deliver the best solutions to our customers’ greatest electrical engineering and construction needs. We have the resources and expertise to manage any commercial, industrial, or one-of-a-kind challenge in aerospace, biotech/pharmaceutical, education, healthcare, entertainment, hospitality, manufacturing, and retail. Our services include electrical construction, technology solutions, and alternative energy where CSI Electric is regarded as a premier provider of energy development, installation, and maintenance. Whether your project entails mission-critical power, energy production, or a simple space upgrade, CSI Electric offers unmatched expertise in electrical, energy, and technology solutions. We’re proud to celebrate more than 30 years of commitment to do all things with excellence for our customers, ourselves, and our craft. We Build Better. Essential Functions • Originate, plan, coordinate, and control all assigned estimates to maximize time while delivering on promises to customers and co-workers, • Manage the activities of each estimate for quality and accuracy of work: including performing quantity take-offs, scheduling tasks, and achieving goals and standards, • Analyze regional labor rates and per diems to be used in the estimate, • Request, obtain and review quotations from vendor and subcontractors for materials and performance tasks not being self-performed, • Ability to travel to project sites to observe construction sequence, means and methods, site conditions and perform time studies, • Assist in the preparation of bid proposals for an RFP, • Assist with bids, documents and reports in an accurate, complete and professional manner, • Survey job sites as needed for scope of work and to determine the most cost effective and efficient plan possible, • Ensure all estimates and RFP’s are fulfilled to the customer’s or CSI’s conditions for satisfaction, • Maintain technical knowledge and building codes by attending educational workshops, reviewing technical publications, • Establish and maintain a positive and cooperative working relationship with clients, vendors, subcontractors and colleagues, • Promote the Company image through exercising sound and ethical business practices as they relate to clients, subcontractors, suppliers, coworkers and the public, • Work with Preconstruction to determine the general expenses, labor rates, and other costs associated with each project, • Analyze and interpret construction drawings, specifications and other bid documents, • Perform accurate take-offs for a diverse range of EPC solar and BESS construction projects, • Understand Scope of Work to bid as well as resolving discrepancies by collecting and analyzing information, • Confer with engineers, architects, owners, contractors and subcontractors on changes and adjustments to cost estimates, • Prepare pre-bid RFI’s and track and document responses, • Contribute to team effort by accomplishing related results as needed, • Attend meetings/interviews with clients, pre and post bid, • Mentor estimators to assist in their development and professional growth, • Responsible for the accuracy and timeliness of estimating tasks performed by estimators as well as self, • Ability to perform conceptual solar and BESS EPC estimates, • Provide bid review details to the Director of Preconstruction, prior to sending to client, • Upon award of a project, be able to accurately turnover all relevant documents to the Project Management Team Responsibilities Qualifications • A Bachelor’s degree in a construction, engineering, or business related field from an accredited college or university preferred* Knowledge/Skills/Abilities • Familiarity with Accubid, Livecount, and Bluebeam preferred, • Ability to read and understand drawings for all trades Architectural, Civil, Mechanical, Structural, Electrical, and Plumbing drawings, • Proficiency in MS Office Suite (Excel and Word primarily), • Industry knowledge, • Excellent communication skills, both written and verbal, • Able to work both independently and as a team member, accepting assignments from senior management, • Detailed knowledge of estimating fundamentals, • General understanding of Fixed Price, Time & Materials, Cost Plus and Unit contract pricing mechanisms, • Ability to work in a team environment and accept periodic peer-to-peer bid reviews, • Ability to assess time of completion and required resources needed to meet a deadline, • Working knowledge of project accounting practices and financial systems, • Ability to take ownership and accountability, • Ability to prioritize multiple and simultaneous projects, issues and activities, • Positive, proactive attitude and customer focus, • Strong organization, planning and time management skills, • Ability to provide complete estimates with less than complete documents/information, • Extensive knowledge of the NEC and other building codes as they relate to Utility Scale EPC, • Understanding of electrical theory and calculations, • Frequently works outdoors on uneven surfaces, • May be required to sit or stand for long periods of time, • May work in varying weather conditions: hot, cold, and wet conditions, • Frequently works in areas with large industrial equipment subject to high noise levels, • May occasionally work in areas with hazardous chemicals Qualifications Compensation & Benefits • Hourly rate $33.00-$65.00/ hour (Non-exempt), • Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. CSI reserves the right to adjust ranges depending on the selected candidate's qualifications., • Amazing Company Culture - We have a culture of trust, teamwork, performance, and commitment that drives our success., • Competitive Salaries - We pride ourselves on offering above-average industry salaries based on talent and experience., • Annual Paid Time Off starting at 15 days plus 9 paid Holidays., • Generous 401(k) Plan with 100% match up to 6%. Immediate vesting and Annual profit-sharing potential., • Company-paid life, and accidental death & dismemberment., • Employee Assistance Plan (EAP)., • Various voluntary plans are available, including short- and long-term disability, supplemental vision, accident, hospital and critical illness, and additional voluntary life insurance plans for employees and dependents. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.

Job Description Join our Team! Our employees are thriving both inside and outside of the office. We are growing faster than ever and it’s not because of what we do, but how we do it. It’s simple, our employees are our greatest asset. We value them and give them every reason to stay happy and motivated. We perform at high levels, fueled by an eclectic team. We boast a fun, energizing workplace with an emphasis on innovation, teamwork, quality work, and customer satisfaction. COMPENSATION AND BENEFITS: • Salary Range: Competitive based on Individual Experience, • Medical, Dental & Vision Coverage, • 401 K Program, • $100K Life Insurance, • Accelerated Growth Opportunities, • Access to the Largest Construction Projects, • Nationwide Offices, • A competitive and Rewarding Environment, • A Diverse and Inclusive Workplace YOUR CAREER STARTS HERE! ABOUT US: * ISAT is a pioneer in MEP subcontractor services, blending engineering expertise, manufacturing experience, and wholesale distribution. Since 1977, our commitment to innovation has led to cost reduction, faster installation, and a safer working environment for projects of all sizes worldwide. Our dynamic team of over 700 professionals specializes in MEP support design, technical VDC (Virtual Design and Construction), project management, detailing, project support, and more. We offer holistic solutions for projects of any size, and believe in a collaborative approach that streamlines the design and construction process, reducing project completion times. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Assessment of piping systems to determine the need for flexibility analysis and whether a formal analysis is necessary per the appropriate ASME B31 code., • Perform ASME B31 pipe stress analysis using hand calculations and analytical methods with software to evaluate sustained, pressure, displacement range and occasional loading requirements as outlined in Chapter 2 of ASME B31.1., • Use of Autopipe, STAAD, Solidworks FEA and hand calculations for piping analysis and support/restraint design in a 3D environment., • Coordinate and communicate with clients in a 3D environment using Revit, AutoCAD, AutoCAD Plant 3D, AutoCAD Fabrication CADMEP, Navisworks, etc., • Working with in-house Structural Engineers, develop a series of (standard) installation details to anchor/guide pipes to accommodate the loading conditions determined during analysis to include details for shaft risers, wall mounted systems, systems supported by moment frames, vibration isolated systems, etc., • Understanding, clarifying, and controlling project scopes of work., • Assisting in developing quotes and cost analysis for projects., • Developing cost-effective engineering solutions., • Develop a thorough understanding of relevant building codes and standards as they relate to pipe design, thermal stresses, and seismic loading to include (but not limited to): ASME B31 codes and standards, ASME BPVC, NUREG, MSS standards, International Building Code (IBC), ASCE 7, and ASHRAE., • Engineering statics, solid mechanics, fastening design, anchor/beam calculations., • 2D/3D CAD detailing of supports on MEP systems in 2D/3D AutoCAD drawings/models., • Interface with 3rd party reviewing entities including but not limited to project design teams, engineers, and local authorities., • Answering engineering questions and providing information to clients on the phone, in person, or in writing. QUALIFICATIONS: • B.S. in Mechanical Engineering, • Minimum of 2 years of experience in conducting ASME B31 pipe stress analysis, • Mechanical PE license, preferably in the state of California (Preferred, all levels considered) Special consideration will be given to candidates with a working understanding of the following: Mechanical, Process, Electrical, Plumbing, and/or Fire Protection system basic construction; including engineering terms, drawings, and trade specific experience. Further Qualifications - The successful candidate must also pass a background check. *Equal Employee Opportunity

Job Description Rubbercraft is seeking a Quality Intern who is a student, or a recent graduate undergoing on-the-job supervised training in preparation of a desired career. The individual performs a variety of tasks that provide business support to a functional area. The Summer 2026 internship program will begin June 1st and run approximately 12–16 weeks, with anticipated end dates between August 28th and September 18th depending on availability. Interns will work 20–30 hours per week (minimum 20, maximum 30), Monday through Friday, with flexible scheduling. About Rubbercraft: Rubbercraft is a trusted leader in engineered elastomer solutions serving aerospace, defense, and industrial markets. Our team designs and manufactures precision-molded seals, gaskets, and custom rubber components that perform in the most demanding environments. We take pride in craftsmanship, collaboration, and a culture built on innovation and reliability. Job Responsibilities: • Provides business support to an assigned functional area, • Assists with various projects such as performing research, gathering data, maintaining databases, files and documents, • Provides engineering support for manufacturing, testing, quality and design engineering groups, • Supports team daily operations by learning and participating in a variety of activities, • Participates in preparation and delivery of training materials, • Opens, sorts and routes incoming mail and makes preparations for outgoing mail, • Other responsibilities as assigned, • Regular, consistent and punctual attendance is required. Job Specifications: Education: A Secondary Certificate/High School Diploma/GED and at least two years schooling pursuing a Bachelor's or Master's degree in aerospace, manufacturing, mechanical, or industrial engineering Years Experience: 0-2 years of relevant work experience that will allow successful performance of job expectations Skills: • Strong attention to detail, good organizational skills and the ability to prioritize with changing situations, • Ability to use existing procedures to solve straightforward problems, • Good interpersonal, written and verbal communication skills to drive tasks to completion, • Working knowledge of Microsoft Office Benefits: IPS is an Equal Opportunity Employer Veterans/Disabled - Affirmative Action Employer. This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. (Actual placement within the salary range is dependent on multiple factors, including but not limited to skills, education, experience and location)

Job Description Drive the Future with Xos Xos (NASDAQ: XOS), is a technology company and electric truck manufacturer on a mission to decarbonize commercial transportation. We design and build state-of-the-art electric vehicles, develop advanced fleet management software, and create charging solutions that make fleet electrification seamless and cost-efficient. At Xos, we're problem-solvers, innovators, and go-getters, working together to drive a cleaner, more sustainable future. Join us and be part of the movement shaping the next generation of commercial transportation. The Role Xos is seeking a Senior Vehicle Controls Software Engineer to lead the development, integration, and validation of control systems across our electric vehicle platforms. In this role, you'll design and implement embedded control software that powers core vehicle systems including propulsion, energy management, thermal control, and safety. Success in this role requires strong expertise in embedded software and EV systems, couple with the ability to tackle complex engineering challenges with precision and creativity. You'll collaborate closely with cross-functional teams to deliver production-ready software that meets rigorous automotive standards and drive performance across our growing vehicle lineup. This is an on-site based role at our Los Angeles, CA HQ Responsibilities • Lead the design, development, and integration of vehicle control software across multiple electric vehicle platforms., • Define and maintain system and software architecture for propulsion, regenerative braking, energy management, and thermal control systems., • Oversee the validation and verification of control software, ensuring functionality, performance, and safety compliance., • Translate system level and stakeholder requirements into detailed technical specifications and software requirements., • Conduct system-level trade studies, simulations, and analyses to support design decisions and mitigate technical risks., • Collaborate with cross-functional engineering teams, including electrical, mechanical, and test, to ensure seamless system integration and traceability., • Support root cause analysis and resolution of complex technical issues using structured problem-solving methodologies (e.g. 8D, DMAIC)., • Participate in supplier assessment and integration of critical components and subsystems affecting vehicle control performance., • Ensure adherence to functional safety processes (ISO 26262) and contribute to the development of safety-related work products., • Contribute to continuous improvement of software development, verification, and validation practices within the vehicle systems engineering function., • Bachelor's or Master's degree in Electrical Engineering, Control Systems, Computer Engineering, Automotive Engineering, or a related field., • Minimum 5+ years of experience in embedded software development, with at least 3 years in vehicle control systems for electric or hybrid vehicles, • Proficiency in C/C++, MATLAB/Simulink/Stateflow, and experience with software-in-the-loop (SIL) and hardware-in-the-loop (HIL) environments., • Demonstrated understanding of EV systems, including propulsion, motor/inverter control, battery management systems (BMS), and vehicle-level energy management., • Experience with functional safety standards (ISO 26262) and automotive development lifecycles., • Familiarity with software requirements management tools such as JIRA, Jama, Polarion, and version control systems, • Strong analytical, diagnostic, and problem-solving skills with attention to technical detail., • Experience with model-based design workflows and code generation ( e.g. Embedded Coder), • Knowledge of communication protocols such as CAN, LIN, and Ethernet, • Ability to travel domestically up to 20% as required to support testing, validation, and launch activities., • A valid Driver's License and a clean driving record are required for this position, as driving is an essential function of the role The salary range for this role is specific to the locations listed below and is the range Xos Inc. reasonably and in good faith expects to pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors including, but not limited to, job-related knowledge, skillset, relevant education, qualifications, certifications, geographic location, and other business or organizational factors. The total compensation package for this position may also include other elements dependent on the position offered. Xos is a people-focused company—we are committed to providing our employees with a comprehensive package of benefits and perks designed to support their well-being and professional growth. We continually evaluate and expand our offerings to best serve our team. • Comprehensive Medical, Dental, and Vision - Coverage for you and your family, with PPO and HMO (California) plans available. We offer plans with 100% covered employee premiums. Employees can also enroll in a variety of voluntary ancillary benefits to further support their needs., • HSA & FSA Plans - Set aside pre-tax dollars for qualified healthcare expenses., • PTO - Accrue vacation time over time, with additional days earned as your tenure grows, plus sick time and paid holidays!, • Generous Company Holidays - Enjoy a generous holiday calendar, including a winter holiday hiatus in December., • Basic Life & AD&D Insurance - 100% covered by Xos, with the option to purchase additional life insurance coverage for yourself and eligible dependents., • Betterment 401(k) - Save for retirement with our employer-sponsored plan through Betterment., • Pet Insurance - Coverage for your furry friends to keep them healthy and happy! Commitment to Equal Opportunity Xos is proud to be an Equal Opportunity Employer and will consider all qualified applicants for employment without regard to race, color, gender, pregnancy, sex, sexual orientation, gender identity, gender expression, national origin, age, genetic information, ancestry, protected veteran status, disability, or any other basis protected by local, state, or federal law. Xos provides equal access to services and employment to all qualified persons. For applicants with disabilities or limitations, such as those covered by the Americans with Disabilities Act, requiring accommodations to complete the application and/or interview process, please email us at Candidate Data Privacy This notice describes how Xos (as used in this Notice, the terms "Company," "Xos," "we," "our," or "us" in this Notice refers to Xos, Inc., together with its subsidiaries and other corporate affiliates, who may handle your candidacy and application for employment) may collect, process, and use your personal data in connection with the recruitment process when you apply for a position. Xos may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in the recruitment process ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Xos may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Xos may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform duties, including individuals on our People Operations Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Xos affiliates; and (iii) Xos's service providers, including providers of background checks, staffing services, and cloud services. Where permitted by applicable law, Xos may transfer or store internationally your Candidate Profile Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Notice to Recruitment Services Xos is not accepting applications from third-party recruitment services at this time. Unsolicited resumes or candidate profiles submitted in response to our job postings will not be subject to any referral or placement fees unless a written agreement is in place with Xos for the specific job opportunity.

Job Description:\n\nHadrian - Manufacturing the Future Hadrian is building autonomous factories that help aerospace and defense companies manufacture rockets, satellites, jets, and ships up to 10x faster and up to 2x cheaper. By combining advanced software, robotics, and full-stack manufacturing, we are reinventing how America produces its most critical parts. We’re accelerating our mission with the launch of Factory 3 in Mesa, Arizona, a 290,000-square-foot facility creating 350 new jobs. We are expanding rapidly to support thousands of future hires, launching Hadrian Maritime to expand into naval production, and introducing a Factory-as-a-Service model that delivers complete systems instead of individual parts. Hadrian is backed by leading investors including T. Rowe Price, Lux Capital, Founders Fund, and Andreessen Horowitz, our fast-growing team is united around reindustrializing American manufacturing for the 21st century and beyond. The Role: This is a hands-on leadership role for a true AM quality expert. You will own the full qualification lifecycle, from Installation Qualification (IQ) through Operational Qualification (OQ) and Material Qualification (MQ), ensuring Hadrian's processes meet or exceed the requirements of AMS 7003, AMS 7032, NASA-STD-6030/6033, NAVSEA Technical Publications, and prime customer specifications. This role spans multiple AM modalities, including Laser Powder Bed Fusion (LPBF) and Directed Energy Deposition (DED) processes, with specific emphasis on Wire Arc Additive Manufacturing (WAAM) qualification for U.S. Navy and submarine industrial base applications. You will be responsible for qualification across both PBF-LB and DED; however, deep hands-on expertise in one of these modalities is required, with working knowledge of the other sufficient to provide technical direction and grow into full ownership. You will work cross-functionally with Hadrian's Materials and Process (M&P) team, Applications team, and Systems team to achieve results. In this model, you own the requirement set, including qualification criteria, process control standards, KPV limits, and acceptance specifications, while the M&P, Applications, and Systems teams conduct the implementation. Your deep knowledge of AM process physics, laser and/or arc-based energy sources, feedstock metallurgy, and qualification methodology will be the foundation on which Hadrian builds a scalable, auditable, and production-ready AM operation. What You’ll Do: Cross-Functional Requirements Ownership: Own the AM quality requirement set across Hadrian's operations. Collaborate with the Materials and Process (M&P) team, Applications team, and Systems team to define qualification criteria, process control standards, KPV limits, material acceptance specifications, and documentation requirements. Ensure requirements are clearly communicated and properly implemented through ongoing oversight and compliance verification. Serve as the quality authority during cross-functional reviews, providing technical direction while partner teams execute implementation activities. Machine Qualification and Process Validation: Own the end-to-end qualification framework for AM equipment, including IQ, OQ, and MQ. Define qualification requirements, acceptance criteria, and test matrices. Collaborate with the Materials and Process (M&P) team to develop build layouts and qualification plans; M&P executes those plans while this role provides oversight and ensures compliance. Ensure all machines are maintained in a known, calibrated state with active qualification status. KPV Management and Process Control: Define and own the requirements for Key Process Variables including laser power, beam caustics (spot size, shape, M2, thermal shift, location of focus), scan field calibration, shielding gas flow, and oxygen content. Collaborate with M&P and Systems teams to establish tolerance bands, measurement frequencies, SPC programs, and process window studies per AMS 7003 and AMS 7032 guidance. Ensure ongoing compliance through oversight and review of KPV data. Laser Diagnostics and Beam Characterization: Define requirements and acceptance criteria for all laser power measurement, beam profiling, and caustic measurement activities. Collaborate with M&P to specify beam profiling equipment and define measurement protocols. Provide oversight of measurement execution and interpret results to ensure laser systems are performing within qualified parameters. Gas Flow Measurement and Control: Define requirements for gas flow characterization across build platforms, including measurement methods, acceptance criteria, and correlation to part quality. Collaborate with M&P on execution of anemometer-based measurements and flow mapping. Ensure airflow consistency is validated during IQ and monitored through PM. DED and WAAM Qualification: Own the qualification framework for Directed Energy Deposition processes, with specific focus on Wire Arc Additive Manufacturing (WAAM) for U.S. Navy and submarine industrial base applications. Collaborate with M&P to define process control requirements, qualification test plans, and acceptance criteria for DED/WAAM in accordance with NAVSEA Technical Publications, AWS D20.1, and applicable defense standards. Provide oversight of qualification execution and ensure methodology supports NAVSEA technical warrant holder approval for AM production. Standards Compliance and Regulatory Readiness: Serve as the subject matter expert on AMS 7003, AMS 7032, NASA-STD-6030, NASA-STD-6033, NAVSEA Technical Publications for PBF and DED, AWS D20.1, and applicable prime customer specifications. Maintain awareness of evolving AM standards from SAE, ASTM, ISO, AWS, and Nadcap. Ensure Hadrian's quality systems and process control documents align with current and anticipated requirements. NIAR Qualification Framework, JAQS-SQ, and Navy AM COE Alignment: Stay current with NIAR's work on AM machine qualification, OQ guidance, the Joint Additive Qualification for Sustainment, Supplier Qualification (JAQS-SQ) program, and the U.S. Navy's Additive Manufacturing Center of Excellence (AM COE) activities. Leverage these frameworks to inform Hadrian's internal qualification strategy and ensure alignment with DoD and Navy supplier readiness expectations. Powder Quality and Material Control: Own the requirements for feedstock quality across both powder and wire processes, including incoming inspection criteria, lot control standards, storage and handling requirements, reuse methodology, and contamination prevention. Collaborate with M&P to develop and implement procedures aligned with AMS 7002 and alloy-specific powder specifications. For wire feedstock, collaborate with M&P to ensure chemistry, surface condition, size tolerance, and traceability requirements are met. Provide oversight of powder reuse procedures, sampling plans, and sieve management protocols to ensure ongoing compliance. Material Qualification and Testing: Define target material properties, acceptance criteria, and testing requirements. Collaborate with M&P to develop test plans and manage mechanical testing campaigns (tensile, fatigue, compression, metallography, chemistry). Provide oversight to ensure OQ builds meet material specification requirements across all qualified orientations and build areas. Quality Systems and Documentation: Own the requirements for AM-specific process control documents (PCDs) including facility control plans, operator training programs, work instructions, digital file configuration control, PM plans, calibration verification plans, machine requalification plans, and KPV plans. Collaborate with M&P, Applications, and Systems teams on document development. Ensure all documentation is compliant and integrated into Hadrian's Quality Management System. Supplier Quality Oversight: Collaborate with Supply Chain and M&P to define technical quality requirements for AM suppliers. Provide oversight of qualification audits, process reviews, nonconformance management, SCAR issuance, and CAPA verification. Ensure suppliers maintain compliant quality systems and produce material that meets Hadrian's requirements. Requalification and Verification Management: Own the requalification framework, including triggers and verification event criteria. Collaborate with M&P and Systems teams to assess the impact of machine changes, maintenance activities, software updates, component replacements, and environmental changes on qualification status. Determine appropriate response levels (full OQ, partial OQ, or verification) and ensure compliance through oversight of remediation activities. Preventative Maintenance Program: Define PM requirements for all AM equipment, including verification items, intervals, measurement protocols, and documentation requirements. Collaborate with Operations on PM plan development and execution. Ensure PM activities are traceable and that any findings are assessed for impact to qualification status. New Product Introduction (NPI): Collaborate with Applications and M&P teams to support launch of new AM components through APQP, PPAP, and AS9102 First Article Inspection. Define quality requirements and acceptance criteria for NPI. Ensure process readiness, qualification completeness, and compliance prior to production ramp-up. Design for Additive Manufacturability (DfAM): Collaborate with engineering teams to provide quality and manufacturability input, including build orientation, support strategy, downskin parameter effects, and as-built surface finish implications. Represent process capability and quality risk during design reviews. Continuous Improvement: Define quality improvement priorities across AM operations. Collaborate with M&P and cross-functional teams on execution of improvement initiatives using Six Sigma, FMEA, SPC, and Lean methodologies. Ensure gaps in process capability, measurement systems, and documentation are identified and closed. Team Leadership: Build and lead a team of AM quality engineers. Set execution cadence, coach technical development, and ensure fast, rigorous response to quality issues. What We’re Looking For: Bachelor's degree in Engineering (Mechanical, Materials, Industrial, or related); Master's degree is a plus. 8+ years of experience in additive manufacturing quality engineering, with direct, hands-on experience qualifying equipment and processes for aerospace, defense, or spaceflight applications. Deep expertise in at least one of the following AM modalities, with working knowledge of the other: (a) Laser Powder Bed Fusion (PBF-LB), including machine qualification, laser diagnostics, and powder management; or (b) Directed Energy Deposition (DED), including WAAM process qualification, arc-based process controls, and wire feedstock management. This role will be responsible for qualification across both modalities. Demonstrated experience executing IQ, OQ, and MQ on AM machines, including build layout design, test plan development, and material property evaluation. Deep working knowledge of AMS 7003, AMS 7032, and AMS 7002, including process control documents, KPV identification and control, and powder management requirements. Experience qualifying AM equipment to AMS 7032, NASA-STD-6030, NAVSEA Technical Publications for PBF and/or DED, or to prime customer AM specifications with equivalent rigor. Hands-on experience with laser power measurement, beam caustic/profiling equipment, and interpretation of beam quality data (spot size, M2, thermal shift, location of focus, astigmatism). Hands-on experience with gas flow measurement methods and characterization of shielding gas performance across build platforms. Strong understanding of powder metallurgy, including powder quality requirements, particle size distribution, chemistry, morphology, lot control, reuse methodology, and contamination prevention per AMS 7002 and AMS 7031. Familiarity with wire feedstock quality requirements for DED/WAAM processes. Skilled in root cause analysis (8D, 5 Whys, Fishbone), CAPA, and nonconformance management. Deep understanding of AS9100, Nadcap for AM, GD&T, PPAP, APQP, FMEA, and SPC. Excellent communication and cross-functional leadership abilities. Willing to travel up to 20%, primarily within the U.S., with occasional international travel. U.S. Citizen or Permanent Resident (required for ITAR compliance). What Will Set You Apart: Experience with WAAM qualification for U.S. Navy applications, including familiarity with NAVSEA qualification requirements, technical warrant holder approval processes, and the Navy's Additive Manufacturing Center of Excellence (AM COE) in Danville, VA. Familiarity with DED-specific standards including AWS D20.1, AMS 7004, AMS 7005, and ASTM F3187. Familiarity with the NIAR Operational Qualification Guidance Document and related NIAR/America Makes work on AM machine qualification methodology. Awareness of the JAQS-SQ (Joint Additive Qualification for Sustainment, Supplier Qualification) program and its implications for DoD AM supplier readiness. ASQ Certified Quality Engineer (CQE), AS9100 Lead Auditor, or Six Sigma (Green/Black Belt). Familiarity with AM standards such as ASTM F42, ISO 52900, SAE AMS 7XXX Series, and Nadcap requirements for AM. Active involvement in standards committees (e.g., ASTM F42, SAE AMS, ISO TC 261). Experience with AM in-situ process monitoring (meltpool monitoring, optical tomography, recoat monitoring) and its application to quality assurance. Experience with CT scanning, metallurgical analysis, and advanced NDE methods for AM parts. Understanding of multi-laser systems, laser zone strategies, stitching qualification, and scan field calibration for multi-laser LPBF platforms. Proven leadership in team-building and quality system development in fast-paced or startup environments. Knowledge of other manufacturing processes (e.g., CNC, casting, welding, composites). Experience transitioning AM products from R&D to full-scale production. Proficiency with digital QMS, inspection software, and PLM platforms. Compensation: For this role, the target salary range is $220,000 - $250,000 (actual range may vary based on experience). This is the lowest to highest salary we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. Benefits Medical, dental, vision, and life insurance plans for employees 401k Relocation support may be provided for certain situations, based on business need. Flexible vacation policy ITAR Requirements To conform to U.S. Government space technology export regulations, including the Inter

Job DescriptionCompany Description About Us KPFF Special Projects Division Since 1996, KPFF's Special Projects Division has been at the forefront of addressing specialized challenges in project development. With over 150+ team members in three offices strategically located in Long Beach, CA, Tacoma, WA, and Seattle, WA, our approach combines dedicated project managers, a skilled technical team, and a commitment to innovation. We offer a comprehensive range of services including civil, structural, and mechanical engineering, machinery design, construction and project management, and planning services. We specialize in the management and design of heavy civil, structural, industrial, and waterfront infrastructure projects across the United States. Our team thrives on solving unique, multi-disciplinary challenges, collaborating closely with clients such as the Ports of Long Beach, Los Angeles, Tacoma, and Seattle, as well as various municipalities and government agencies. Join us at KPFF Special Projects Division and be part of a dynamic team driving innovation and excellence in project delivery. KPFF KPFF, a multi-office, multi-discipline engineering firm, is committed to Excellence, Trust, Relationships, Stability, and Passion. With over 60 years of experience, we provide creative solutions for diverse projects, scales, and industries. Our 1,500 professionals in 29 offices nationwide thrive in a decentralized structure, offering abundant flexibility and numerous opportunities for professional growth. At KPFF, join a legacy of excellence where every team member has the opportunity to contribute to innovative solutions and impactful projects. Job Description About the Role: The Special Projects Division of KPFF is growing and looking for an ambitious and initiative-driven Civil Engineer to strengthen our dynamic team in Long Beach, CA. You will be in the heart of downtown Long Beach, working on a diverse range of heavy civil and industrial infrastructure projects. As a key member of our team, you'll not only refine your existing expertise in site and land development, but also dive deep into the realms of design, project management, and delivering unparalleled client service. Get ready to surround yourself with an unmatched support system, amplify your capabilities, and become a true consulting expert in the field! What You’ll Be Doing: Civil Design and Development: • Apply your engineering expertise to diverse projects, collaborating with teams to devise innovative solutions drawing on best practices in areas such as linear utility projects, street improvements, low income housing, Waterfront developments, design/build initiatives, and transportation infrastructure., • Contribute to projects involving waterfront developments and industrial developments, leveraging your skills to drive successful outcomes in these specialized areas., • Learn to assess risks and develop mitigation strategies to contribute to project success., • Gain experience in ensuring regulatory compliance throughout the project lifecycle, including understanding regulations and permitting requirements., • Manage project tasks, ensuring efficient coordination of timelines, budgets, and resources to achieve successful project outcomes., • Conduct site visits and inspections as necessary to ensure compliance with project requirements and industry standards., • Foster strong client relationships by actively listening to client needs, providing clear communication, and delivering customized solutions that align with their objectives., • Serve as a trusted advisor to clients, offering expert guidance and proactive support throughout all phases of the project lifecycle.Qualifications Who We’re Looking For: • Bachelor's degree in Civil Engineering., • Engineer-in-Training (EIT) certification required, PE Preferred, • Minimum five years of full-time experience in relevant civil/site development engineering design. (Internship experience is appreciated but does not count towards the three-year minimum requirement.), • Proficiency in Microsoft Office Programs, • Proficiency and experience in AutoCAD for construction document creation., • Preferred familiarity with Civil 3D and MicroStation., • Willingness to mentor entry level engineers and interns, • Excellent teamwork, communication, and interpersonal skills., • Proven capability to work dynamically and effectively in a collaborative environment., • Demonstrated enthusiasm for developing design and project management skills., • Commitment to delivering exceptional client service and exceeding expectations. Additional Information Physical Demands and Work Environment: • Duties are primarily conducted in a standard office setting, requiring prolonged periods of sitting at a desk or computer table., • Occasionally may be required to lift objects weighing up to 15 lbs., • Occasionally visiting project locations and performing field inspections which may involve walking, standing, kneeling, or navigating uneven terrain. Join KPFF for a career adventure that celebrates your expertise and fuels your development. Here, autonomy and innovation converge, empowering you to tackle complex challenges and blossom into a consulting trailblazer. Our culture fosters teamwork, ownership, and common values, ensuring that your accomplishments are celebrated and your career trajectory is in your hands. At KPFF, we're not just coworkers; we're a vibrant community fueled by collaborative creativity, offering you the chance to leave a lasting mark on pioneering projects. We are passionate about supporting our employees through flexible and comprehensive Benefits. Our Benefits include: • 401(k) retirement savings plan with employer contribution (regardless of employee contribution), • Medical insurance (two plans available to choose from), • Dental insurance, • Vision Insurance, • Health Savings Account (HSA) with employer contribution, • Healthcare and Dependent Care Flexible Spending Accounts (FSA), • Life insurance, • KPFF Paid Family Leave, • Short-term and Long-term disability insurance, • Paid holidays (including two floating Holidays), • Hybrid work environment, • Professional development education opportunities, • Mentorship program, • Monthly social events, • Professional Licensure Recognition Program, • Winter parties and summer picnics, • Office committee opportunities The base salary for this role is competitive and will be determined based on the candidate's experience, education, and skills. The expected range for a qualified candidate with 5+ years of experience is $112,000 - $130,000. Additionally, we offer performance-based bonuses to recognize and reward outstanding contributions in each Reporting Center. During the interview process, we'll provide detailed information and address any questions you may have about the overall compensation package and benefits. #LI-AZ1 KPFF Consulting Engineers participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. KPFF Consulting Engineers is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, creed, ethnicity, national origin, religion, marital status, sex/gender (including sexual orientation or gender identity), pregnancy, veteran status, citizenship status, physical or mental disability, or any other protected basis.

Job Description Mechanical Design Engineer I Rubbercraft is seeking a Mechanical Design Engineer I to join our organization and support the design, development, and testing of elastomeric components and precision mechanical systems. This entry-level role is ideal for engineers passionate about mechanical design, materials science, and advanced manufacturing. The successful candidate will work under the guidance of senior engineers on custom-engineered solutions for industries requiring high-performance seals and elastomeric components. About Rubbercraft: Rubbercraft, a member of Arxis, specializes in precision-engineered elastomeric components for aerospace, defense, space, energy, and industrial applications. With over a century of expertise, we design aerodynamic seals, fireproof seals, inflatable canopy seals, flexible rubber connectors, space ablatives, EMI solutions, and elastomeric tooling. As part of Arxis, we leverage a combination of advanced materials and engineering innovation to deliver high-performance solutions for demanding environments, ensuring durability, efficiency, and reliability across industries. Essential Duties and Responsibilities As a Mechanical Design Engineer I, you will support the development and optimization of elastomeric components and sealing solutions for aerospace and defense applications. This position involves collaboration with cross-functional teams, learning engineering processes, and assisting in design activities under supervision. 1. Mechanical Design & Development • Assist in the design and development of elastomeric components, seals, and polymer-based solutions for aerospace and defense applications., • Create 3D CAD models, technical drawings, and engineering documentation using SolidWorks and/or CATIA in 3DX PLM (ENOVIA)., • Support the design of basic process, test, and check fixtures, including use of 3D printing technology., • Assist in design optimization for manufacturability, durability, and cost-efficiency., • Support testing activities and data collection for design validation. 2. Documentation & Compliance • Assist in preparation of engineering documentation, reports, and test plans., • Follow established quality procedures and engineering standards (e.g., AS9100, ISO 9001) under guidance., • Support compliance activities and documentation updates as directed., • Assist with maintaining engineering records and material data. 3. Collaboration & Support • Work with manufacturing, quality, and lab teams to support transition of designs from concept to production., • Assist in prototype development, validation testing, and troubleshooting activities., • Support Engineering Department requests and participate in team meetings as needed., • Collaborate with internal teams to understand design requirements and project objectives. 4. Innovation & Continuous Improvement • Support continuous improvement initiatives and lean engineering activities., • Assist in researching materials, processes, and technologies related to elastomeric products., • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or a related field., • 0–3 year of experience (internships or co-op experience acceptable). 1. Technical Skills • Basic proficiency in 3D CAD software (SolidWorks and/or CATIA)., • Introductory understanding of GD&T (ASME Y14.5 preferred)., • Basic familiarity with manufacturing processes such as rubber molding, machining, or additive manufacturing., • General understanding of engineering materials (elastomers and polymers preferred). 2. Soft Skills • Strong willingness to learn and develop technical skills., • Good problem-solving and analytical abilities., • Effective interpersonal, verbal, and written communication skills., • Detail-oriented with the ability to manage assigned tasks. 3. Preferred (Not Required) • Exposure to aerospace standards (FAA, AS9100, MIL-SPEC)., • Familiarity with FEA concepts or coursework (hands-on experience not required)., • Internship or academic experience with elastomers, seals, or mechanical systems. At Rubbercraft, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. RCC is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. Applicants requiring reasonable accommodation to complete the application process may contact Human Resources. This position requires access to information subject to the International Traffic in Arms Regulations (ITAR). Employment is contingent upon the applicant being a “U.S. person” as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws.