Mechanical engineering jobs in Kansas City, Missouri - Page 3Crear alertas

Job DescriptionPrimary Purpose: The Engineering Services Manager oversees the planning, coordination, and execution of all engineering and technical support functions for mechanical construction projects. This role ensures design integrity, constructability, and delegated design completion across all project phases. The Engineering Services Manager leads a team of engineers, designers, and technical specialists to deliver high-quality engineering solutions that support project delivery, safety, and client satisfaction. Principal Duties and Accountabilities: Leadership & Management • Lead and develop the engineering services team, including mechanical engineers, and designers., • Establish departmental goals, performance standards, and development plans aligned with company objectives., • Collaborate closely with project management, estimating, DfMA and field operations to ensure seamless project execution., • Oversee staffing, workload distribution, and resource planning for engineering support across multiple projects.Engineering Oversight & Technical Excellence, • Direct the preparation, review, and coordination of engineering drawings, design calculations, and submittals., • Ensure compliance with project specifications, building codes, and industry standards., • Review and validate engineered systems for performance, cost-effectiveness, and constructability., • Provide technical guidance and troubleshooting support to project teams during design and construction phases., • Drive innovation through technology adoption, process improvements, and engineering best practices.Preconstruction & Design-Build Support, • Support estimating and preconstruction teams with technical input, conceptual designs, and system selections., • Participate in design-build and design-assist projects, collaborating with clients, consultants, and trade partners., • Lead value engineering initiatives and life-cycle cost analyses to optimize project outcomes.Quality, Safety & Compliance, • Maintain a strong focus on safety, ensuring engineering solutions promote safe installation and operation., • Implement and maintain quality control procedures for all engineering deliverables., • Ensure all designs meet applicable codes, regulations, and client requirements.Collaboration & Communication, • Partner with Virtual Design & Construction (VDC), DfMA, and Field teams to improve coordination and installation efficiency., • Facilitate technical training, mentorship, and knowledge sharing across departments. Education & Experience: • Bachelor’s degree in Mechanical Engineering, Architectural Engineering, or related field., • Professional Engineer (PE) license., • 8+ years of experience in mechanical construction engineering., • Strong understanding of HVAC, plumbing, and piping systems for commercial and industrial applications., • Proven ability to manage multiple projects and priorities in a fast-paced environment., • Proficient in AutoCAD, Revit, Navisworks, and related design or analysis software., • Strategic Thinking and Planning, • Technical and Analytical Expertise, • Leadership and Team Development, • Collaboration and Cross-Functional Communication, • Quality and Detail Orientation, • Customer Focus and Business AcumenPhysical and/or travel demands:, • Ability to travel to project sites and offices as needed., • Extended periods of sitting and computer use required., • Occasional lifting of materials or equipment up to 25 lbs.Benefits and Compensation:, • The range for this position has been established at $118,160.00 - $166,900.00 per year and is US Engineering’s good faith and reasonable estimate at the time of the posting. The compensation offered to the finalist selected for this role will be set based on a variety of factors, including but not limited to, internal equity, experience, education, specialty, and training. #IND Equal Opportunity Employer, including disabled and veterans. Powered by JazzHR sTYM9788jI

Job Description A CNC Machine Tool Application Engineer contributes to the success of Hartwig by working hand-in-hand with our Sales team to provide support and be a technical resource to ensure customer satisfaction. The customers we serve are in a variety of industries and rely on the Hartwig team to provide the best manufacturing solutions and support the machine tool industry. This full-time position is based in the Kansas City, MO area. The main responsibilities include: • Evaluating manufacturing processes and recommending industry-leading solutions, • Developing and testing alternative processing methods, • Performing time studies for process improvement recommendations, • Overseeing machine installations, • Conducting research and assisting in presenting proposals to customers, • Performing on-site programming and machine operation training for customers Individuals who ideally fit this role should meet the following qualifications: • Two-year degree in manufacturing engineering - preferred, • Experience in machining process development, project management and CNC programming preferred, • Okuma machine programming experience - preferred, • Ability to demonstrate knowledge and application of machine tool products, options and functions, • Strong mechanical and technical aptitude, • Excellent interpersonal skills, such as collaboration, listening, respect and work ethic, which lead to lasting and trusting relationships with team members and customers Hartwig's team of over 200 professionals throughout the U.S. is dedicated to helping manufacturers control and power the growth of their business. To achieve this, team members are given the tools and training for success. In addition to a comprehensive first year training program and on-going professional development, Hartwig provides a full benefit package including health, dental, vision, life and disability insurances. Compensation is also a key element in your decision to join the Hartwig team. Our 401k program has a match and team members are bonus eligible. As an Applications Engineer at Hartwig, you will also be provided with a laptop and cellphone. With over 60 team members who have been with us 10 years or longer and over 12,000 installations since our founding in 1960, Hartwig has gained a reputation for superior service, integrity and support. We would be honored to have you consider joining our team. Hartwig, Inc., including all operating subsidiaries, is an Equal Opportunity Employer - M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, protected veteran status, sexual orientation, gender identity, or any other protected class.

Job DescriptionPosition Overview We are seeking a Mechanical Engineer to lead the design of mechanical systems for both new construction and renovation projects, with an emphasis on mission-critical facilities. This position requires expertise in managing complex, multi-discipline projects and coordinating effectively with other engineering teams. The Mechanical Engineer will oversee all aspects of the mechanical discipline on assigned projects, including design quality, calculations, specifications, and adherence to project schedules and budgets. Key Responsibilities * Serve as the lead mechanical engineer, ensuring high-quality, code-compliant designs that meet client needs and project objectives. * Collaborate with clients to define project goals, performance criteria, and constraints. * Develop and evaluate mechanical design solutions, providing recommendations based on technical, operational, and cost considerations. * Produce and oversee design documents including conceptual layouts, equipment selection, construction drawings, specifications, and energy modeling. * Coordinate with other engineering disciplines to ensure integrated, constructable solutions. * Maintain consistent communication with clients, consultants, vendors, and internal teams throughout the project lifecycle. * Act as the client’s representative during construction phases, reviewing submittals, responding to RFIs, and conducting site inspections. * Mentor junior engineers and designers, fostering technical growth and leadership skills within the team. Qualifications * Experience: 5+ years in the MEP industry with significant experience in mechanical system design. * Education: Bachelor of Science in Mechanical Engineering (or higher). * Licensing: Engineer In Training (EIT) or Professional Engineering (PE) License in Texas. * Proven ability to lead multi-discipline project teams. * Strong communication, coordination, and problem-solving skills. Preferred Skills * Proficiency with Revit and related design software. * Background in mission-critical or complex facility projects. * Commitment to delivering innovative, sustainable, and community-focused solutions.

Job Description Project Sales Engineer – HVAC & Plumbing Construction Kansas City Metro | Full-Time | Base + Commission We’re working with a trusted mechanical contractor in the Kansas City area that specializes in complex commercial and industrial HVAC and plumbing projects. Known for their engineering expertise and strong partnerships with repeat clients, this team delivers technically sound, efficient mechanical solutions for a wide range of building types. About the Role We’re looking for a Project Sales Engineer to lead business development efforts through strategic relationships with general contractors, developers, property owners, and design teams. This role is ideal for someone with a technical foundation—especially an engineering degree or licensure—who can speak the language of construction, influence early design decisions, and drive projects forward from concept through contract. This is not just a sales role—it’s about being a technical advisor and trusted resource in the construction community. Key Responsibilities • Develop and maintain strong relationships with GCs, owners, architects, and developers, • Identify and track project opportunities from pre-construction through bid and award, • Collaborate with estimating, preconstruction, and project management teams, • Participate in early design discussions to influence mechanical system selection, • Attend industry events, site visits, pre-bid walkthroughs, and networking opportunities, • Manage pipeline activities and reporting through CRM and internal tools Preferred Qualifications • Bachelor’s degree in Mechanical Engineering (BSME) or related technical field, • P.E. license (or in progress) highly preferred, • Prior experience with HVAC, plumbing, or mechanical system design/sales, • Understanding of mechanical drawings, specifications, and construction timelines, • Excellent communication and presentation skills, • Comfortable operating in a relationship-driven, consultative sales environment, • Knowledge of Kansas City commercial construction market strongly preferred

Job Description P1 Service, LLC., is seeking a Maintenance Technician to work at The University of Kansas Health System, in Kansas City, KS. Join our P1 Team! P1 Service, LLC., part of the BCTS family of facility solutions providers, provides customers with the best in HVAC, mechanical, electrical, and plumbing service. Our turn-key solutions for all types of building solutions in a variety of markets has made P1 Service one of the top contractors in the nation. When you work for P1 Service, you'll be part of a culture that puts safety first, treats associates like family, and provides challenging work in a rewarding, energetic environment. P1 Service takes pride in maintaining a high standard of excellence along with an ethical and friendly business culture. P1 Service, LLC. is an equal opportunity employer. All qualified applicants will receive consideration for employment, regardless of status, including status as a protected veteran or as an individual with a disability. We offer a competitive compensation package. Essential Duties: • When necessary, additional duties may be assigned, and P1 expects the incumbent to exercise initiative to anticipate and prevent problems., • Inspect, diagnose and test mechanical equipment, electrical equipment and fire & life safety systems, using a variety of tools and instruments., • Respond immediately to fire alarm systems; disengage electrical, water, or gas systems to protect building occupants and property; assist Hospital staff in removing patients, personnel or equipment as needed., • Perform specified preventive maintenance and testing of equipment., • Conduct periodic inspections of designated buildings and equipment; when necessary, repair and perform preventive maintenance on general building facilities and electrical, mechanical, HVAC, refrigeration, and communication systems., • Perform prescribed non-destructive tests; collect and report deficiencies as well as document all tests using both computer and hand written logs., • Good communication skills in a highly demanding environment with the owner, or the owner’s representative, on the work performed and present status of various system(s)., • Interpret engineering drawings in reference to layout, location and operation of the system(s)., • Be responsive to the customer’s needs., • This position reports directly to the Lead Technician and is responsible for keeping them informed about the project’s productivity and profitability and about any personnel, leadership, financial, or legal issues., • Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; develops alternative solutions; works well in group problem solving situations, • Performs all work in accordance with established code and safety procedures., • Performs patient room preventative maintenance including door adjustments, ceiling tile replacement and floor tile replacement., • Candidate must be very detail-oriented with analytical, mathematical, and grammatical aptitude. Accuracy and precise calculation ability will be essential to the position., • Ability to multi-task assignments-works on multiple projects simultaneously and retains detail on a daily basis. Required: • Education: High school diploma or GED equivalent., • Must have ability to interpret blue prints, estimating jobs and familiar with hand tools & equipment associated with the trades., • 1-5 Years minimum of work experience performing building maintenance, including HVAC, plumbing and electrical troubleshooting., • Must be able to satisfactorily pass a criminal background check and drug screen., • Must be able to satisfactorily pass a motor vehicle record check. Must be able to meet P1 qualifications to operate a vehicle on company business. Must be at least 18 years of age. Must possess a valid driver’s license. Must have access to drive a well maintained vehicle. Must have up to date registration with the local Department of Motor Vehicles., • Upon offer of position you are required to provide the following:, • Medical records showing up-to-date tuberculosis (TB) test or authorization for new TB testing., • Medical records showing up-to-date vaccinations or proof of immunity regarding the vaccination list below. If no immunity, then authorization for new vaccinations or a signed declination is required regarding the vaccination list below. Vaccinations are measles, mumps, rubella (combined MMR), chickenpox (Varicella), tetanus/diphtheria/pertussis (Tdap), and Hepatitis B., • Annual vaccination for influenza (flu) is required during flu season or medical proof of flu vaccine allergy and signed declination.Preferred:, • EPA Universal To Apply: Visit our website at If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting Human Resources: email or call: 913-303-9033. Powered by JazzHR M4Q0KsLu0U

Job Description American Concrete Products, a growing precast concrete manufacturer is seeking a Project Coordinator that will provide operations and customer service support function(s). Primary Objective: Provide administrative support to Project Management team, and ensure accurate and timely flow of delivery paperwork, scheduling and ERP order maintenance Critical Job Functions: • Coordinates release work with Sales, Project Managers and Operations personnel to execute delivery schedules., • Master the fundamentals of Sales Order entry in X3 ERP, part creation, purchase requisitions, and part maintenance., • Enter sales orders into ERP system, print and email delivery tickets, BOL’s, product labels and related yard/QC paperwork., • Create Purchase Orders (P.O.) and timely issuance of P.O.’s to vendors to avoid delaying contractual schedule deadlines, • Executes daily production entry reports, receiving and issuing raw materials, inventory management and cycle counting., • Create and submit timely Customer Invoices, reconcile all external billings, and project financials to avoid over/under billing, • Assists with contracting outside trucking broker(s) to configure products, sequence and assign load/unload at plant and jobsite., • Answer and return internal & external customer phone calls in a timely manner and handle issues swiftly and professionally., • Balance relationships with Sales, Operations, and other Project Managers to achieve accountability and desired outcomes. Attributes • Resourceful and information seeking, does not assume information will be provided to perform critical tasks., • Demonstrate ability to problem solve, think quickly and respond to Customers in a timely manner., • Displays a sense of urgency and professionalism when handling difficult Customer service issues or requests., • Ability to self-manage priorities and follow up with internal and external Customers., • Displays pride in work product and work ethic, strives to meet or exceed expectations and achieve results., • Self-starter who is engaged and interested in actively learning about the company’s products and processes., • Strong communication skills (verbal and written), • Strong analytical/critical thinking skills, • Manufacturing, engineering, mechanical and/or electrical control experience a plus., • Associates degree or equivalent vocational training., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability Enterprise Properties, Inc. and its subsidiaries are an equal opportunity employer that complies with EEOC rules and regulations. American Concrete Products is part of the Enterprise Properties, Inc Family Pre-Employment Drug Screen, Criminal Background check, Reference check & Employment Verification are all part of our hiring process. #ACPKS2021

Job Description Salute is a leading provider of cutting-edge Data Center Infrastructure Services, dedicated to serving data center clients worldwide. We pride ourselves on delivering sustainable solutions, unparalleled reliability, and outstanding customer service. As we continue to grow, we are seeking a dynamic and experienced Critical Facilities Engineer III to join our team and drive our relationships with hyperscale clients to new heights. Salary: $50/hr Scheduled: Rotating days, rotating days and night shifts every 2 months, 12-hr shifts 7-7 Site: Onsite position in Kansas City, MO. Salute Benefits That Put You First We know life doesn’t stop when work begins, that’s why we offer perks designed to support your well-being, your family, and your future: • Time to Recharge: Enjoy 8 company-paid holidays, 2 floating holidays, and PTO so you can rest, celebrate, and take care of what matters most., • Comprehensive Benefits Package: Including Medical, Dental, and Vision that you can enroll in starting on Day 1. Coverage begins the first of the month following 30-days of employment., • Peace of Mind: The Employee Assistance Program is available to all employees, even if you do not participate in the benefits package., • Your financial future matters: Enjoy our employer-supported 401(K) with immediate 100% vesting, plus a 3% employer match and a 50% match on the next 2%., • Wellness Support: Access to HSA, mental health resources, and gym discounts—because your health matters., • Extra Protection & Perks: Through discounted group programs, such as legal services, home & auto insurance, pet insurance, and ID theft protection for life’s unexpected moments. Critical Facilities Engineer III: The Critical Facilities Engineer III serves as a senior-level contributor within the site-level Data Center Operations team, reporting directly to the Manager of Engineering Operations. This role is responsible for overseeing the performance, maintenance, and reliability of mission-critical infrastructure across one or more data center facilities. The Engineer III brings deep expertise in either electrical or mechanical systems and is expected to demonstrate working proficiency in complementary disciplines. This position plays a key role in executing and refining operational procedures, supporting change management, and ensuring compliance with Salute’s standards for safety, uptime, and service excellence. Responsibilities: • Maintain and operate all mission-critical systems, including UPS, HVAC, generators, fire/life safety, BMS, and CMMS platforms, in accordance with Salute’s engineering protocols., • Interpret and apply site-specific system one-lines, equipment nomenclature, and layout drawings to support accurate diagnostics and maintenance., • Execute and refine Standard Operating Procedures (SOPs), Emergency Operating Procedures (EOPs), and Sequence of Operations (SOOs) to ensure operational readiness., • Monitor and respond to BMS alarms, extract trend data, and escalate issues per Salute’s incident management framework., • Create, edit, and close change management work orders and incident reports using the CMMS platform., • Conduct routine inspections and rounds to identify anomalies and ensure compliance with Salute’s Maintenance and Operations Standards., • Lead or support low-risk maintenance activities, including the development and execution of Method of Procedures (MOPs)., • Troubleshoot and resolve mechanical and electrical issues independently, escalating as needed., • Supervise construction activities and vendor installations to ensure alignment with site protocols and safety standards., • Support internal and external audits, including SSAE16, SOC2, ISO 27001, and other accreditation initiatives., • Maintain awareness of customer-specific operational requirements and contribute to a culture of service excellence., • Complete Salute’s Critical Awareness Training and adhere to Environmental and Occupational Health and Safety standards., • Minimum of 5 years of experience in mission-critical facility operations or equivalent technical roles involving UPS, HVAC, generators, and fire/life safety systems., • Proficiency in either electrical or mechanical systems, with demonstrated competence in the complementary discipline., • Strong understanding of infrastructure redundancy models (N+1, 2N, ATS/STS) and associated risk mitigation strategies., • Familiarity with energy efficiency principles and their application in data center environments., • Proficient in Microsoft Office Suite; working knowledge of Microsoft Project, Adobe Acrobat, Visio, or AutoCAD is preferred., • Experience with CMMS, DCIM, and power metering systems., • Strong interpersonal and communication skills, with the ability to respond effectively to complex issues and customer needs., • Ability to lift and carry heavy equipment, up to 40lbs., • Ability to climb ladders and multiple flights of stairs to access elevated equipment, • Ability to stand for long periods of time in various work environments, • Ability to bend, stoop, kneel, and reach for equipment related tasks, • Basic physical fitness to respond quickly to emergency situations and navigate areas quickly, • Ability to move quickly and efficiently withing various work environments to troubleshoot issues or respond to emergencies., • Good hand-eye coordination and dexterity for working with small components and connectors, • Clear vision, with or without correction, to perform tasks requiring attention to detail and precision while wearing safety glasses, • Ability to differentiate between color-coded warning signs, labels, and cables, • Ability to work in environments with a wide variety temperature inside a facility, • Ability to work outdoors in various weather conditions, including extreme temperatures, rain, or snow, • Capability to work in environments with elevated noise levels while wearing hearing protection This description does not cover all duties that may be required. Employees must follow any job-related instructions and perform other duties as assigned. Successful performance requires these necessary skills, aptitudes, and abilities. If you are a motivated and results-driven individual with a passion for data center services and a knack for building strong client relationships, we want to hear from you. Join us in revolutionizing the data center industry and apply today! Salute is an equal opportunity employer committed to celebrating diversity, creating an inclusive environment for all employees, and providing equal employment opportunities to all applicants; if you require a reasonable accommodation to participate in the job application or interview process, perform essential job functions, or receive other benefits and privileges of employment, please contact our Human Resources department at for more information.

Job DescriptionDescription: Oneida Engineering Services (OES) is a Native American, tribally-owned small business wholly owned by the Oneida Nation of Wisconsin. As part of the Oneida ESC Group, OES is committed to delivering high-quality engineering, environmental, and construction management services to Federal, State, and Local agencies across the country. Joining OES means becoming part of a mission-driven organization that supports tribal economic development and community empowerment. With a nationwide reach and certifications in multiple states, OES offers diverse, impactful projects and a collaborative culture that values professional growth, innovation, and public service. We are seeking a full-time Construction Project Scheduler based out of Kansas City to join our dynamic team supporting large-scale construction and engineering projects. The ideal candidate will have extensive experience with Primavera P6, experience developing and reviewing construction schedules for DOD construction projects, and a strong understanding of schedule management practices in accordance with USACE policies and industry standards. This role requires excellent communication skills, technical proficiency, and the ability to collaborate with diverse teams in a fast-paced environment. Location: US Army Corps of Engineers Kansas City District Office 601 E. 12th Street Kansas City, MO 64106 Travel may be required to sites in Kansas and Missouri Key Responsibilities: Schedule Development & Oversight • Review project designs and provide recommendations for construction duration, • Review construction contractors’ schedule submittals and identify risks and possible mitigations, • Create, update, and maintain detailed construction schedules using Primavera P6, • Perform Time Impact Analysis (TIA) and critical path evaluations, • Conduct recovery schedule analysis to mitigate delays, • Provide weekly “look ahead” schedules within 24 hours of the event, • Attend Schedule Kick-off Meetings to align expectations, • Participate in schedule review meetings with stakeholders identify and assess risks, • Must be a U.S. Citizen, • Must qualify for a Public Trust Clearance, • Minimum 3 years of experience as a construction project scheduler, • Proficiency in Primavera P6 for schedule creation and manipulation, • Strong organizational and time management skills, • Excellent written and verbal communication abilities, • Proven ability to work effectively on large, diverse teams, • In-depth knowledge of USACE schedule management policies and network analysis systems, • Familiarity with construction methodologies and contract administration, • Experience with RMS schedule modules and government scheduling systems, • Professional Development: We encourage continuous learning and cross-disciplinary growth. Whether you're early in your career or an experienced professional, OTIE offers opportunities to expand your impact., • Stability & Vision: Backed by a strong financial foundation and guided by sustainable values, OTIE provides the stability of a respected firm with the agility of a growing business., • Diverse, Challenging Projects: From restoring ecosystems to modernizing critical infrastructure, you’ll contribute to high-profile projects that demand innovation and collaboration., • 13 Paid Holidays, • 15 Days of Paid Time Off (Starting), • 401(k) Retirement Plan with Company Match, • Medical, Dental and Eye Insurance, • Employee Referral Program, • Tuition Reimbursement, • Employee Assistance Program (EAP), • Wellness Program The Oneida ESC Group is a family of companies owned by the Oneida Nation of Wisconsin that delivers customer-focused engineering, science, and construction services worldwide. Our family of companies includes: • Oneida ESC Group (OESC), • Oneida Professional Services (OPS), • Oneida Total Integrated Enterprises (OTIE), • Mission Support Services (MS2), • Sustainment & Restoration Services (SRS), • Oneida Engineering Solutions (OES), • General Mechanical Corporation (GMC), • LG2 Environmental Solutions (LG2) Equal Employment Opportunity: Oneida ESC Group is an equal opportunity employer committed to inclusion and diversity in the workplace. We take affirmative action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws, national origin, disability, veteran status, or other legally protected characteristics. Oneida ESC Group participates in the E-Verify program. Learn more about the E-Verify program. Oneida ESC Group is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Oneida ESC Group makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description Location: Shawnee, KS General Description: Responsible for providing inside sales and process support, design engineering, preparation of product or system or solution specifications, estimation, preparation of bid proposals/pre-qualifications and presentations for manufacturer representatives and regional managers for their assigned areas. Complete proposals accurately and in detail. Maintain regular contact and follow-ups where needed. Prior to bid activity develop all process designs, guarantees & specifications for specific projects, review drawings & specifications, develop bid sheets that contain all costs for each project. Sound understanding of water/wastewater treatment principles and their application in different industries. Understand Parkson range of products, build and develop sub supplier relationships where needed to help complete system proposals. Responsible for accurately entering purchase orders and completing all internal process design work before the project is transferred to project engineering. Essential Functions: • Communicate with Regional Sales Managers, Technical Sales Managers, Reps, and customers., • Lead proposal activities and be willing and knowledgeable to engage other product leads when needed to complete proposal work., • Maintains Master Project File, Maintains SalesForce.com project database., • Ensures all designs are in conformance with contract specifications & drawings., • Ensure all inquiries are responded to in a timely manner and communicate this timeline to the customer., • Redirects sales inquiries to the appropriate product group., • Work with AE Manager when overloaded or out of the office to make sure customers are responded to in a timely manner., • Supports the development and maintenance of a thorough sales toolbox for the product portfolio. Including, but not limited to:, • Competitive intelligence., • Case studies., • Installation and reference lists., • Marketing datasheets., • Sales presentations., • Specifications., • Proposal templates., • Design spreadsheets., • Writes up orders; clearly identifies what was sold, and resolves conflicts between proposal and P.O. regarding price, scope, and delivery schedule., • Seeks vendor quotes to build competitive and accurate project budgets., • Serves as a technical process expert., • Provides post-sale support as required., • Assist Product Manager as requested with strategic initiatives., • Support pilot related activities including on-site support functions., • Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Education: • Bachelor’s degree in Chemical, Civil, Mechanical, Environmental, Biological Engineering or equivalent. Experience: • 2+ years of application or process engineering design experience is preferred. Knowledge, Skills & Abilities: • MSOffice., • Adobe., • Baan., • Experience with ISO9001 requirements desirable., • Excellent written and verbal skills., • Excellent problem-solving skills and ability to multi-task., • Ability to read and interpret engineering specifications and engineering drawings., • Accuracy., • Responsiveness. Travel: • Ability to travel up to 20%. Benefits include health care (medical, dental, vision) with coverage starting on the first day of employment as well as 401(k) with company match and holiday pay. Parkson Corporation is committed to a diverse and inclusive workplace. Parkson Corporation is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job DescriptionDescription: Dialectic is a full-service mechanical, electrical, and plumbing (MEP) engineering design and consulting firm with Headquarters located in the Crossroads of Kansas City, Missouri. Dialectic has a reputation for delivering inventive, flexible, and sustainable MEP designs for retail, education, restaurant, commercial and entertainment spaces. Our team, ranked as one of Kansas City’s most diverse engineering firms, is as talented as they are diverse and works hard to exceed our clients' expectations. Dialectic offers highly competitive benefits that include eligibility for: • ESOP Ownership, • Generous 401K Matching Program with company match and immediate vesting, • Annual Bonus Plan for all employees, • Generous Low-Cost Benefits including medical, dental, vision, life insurance, disability, LegalShield, etc., • Healthy Lifestyle Reimbursement Program, • Generous PTO (Personal Time-Off) policy, • Eight (8) paid Company-paid Holidays, • Flex work schedule options, • Amazing office culture and environment with free snacks, and drinks, • Best in Class Employee Referral Bonus Program, • Rewards for Certifications and Exams, • We believe that a positive and enjoyable work environment enhances productivity and job satisfaction. Our company culture embraces moments of fun, celebration, and camaraderie., • Company events include Annual Holiday Event and ESOP valuation party, Indoor Mini Golf Tourney, Annual Chili Cookoff, Mario Kart Tourney, Holiday Costume Contests, Ping Pong, and much more!, • Pay It Forward Days with volunteering options for charities! Key Responsibilities include: • Independently perform all the tasks necessary to complete design elements for engineering works., • Assess project conditions requirements against information provided and communicate these findings required to the client., • Review local building code, utility, and landlord information to determine location specific design requirements, contact these entities, document these findings and to present to the client., • Coordinate design requirements and decisions with other disciplines, BIM department, and project management., • Reference client standards and prototypical designs., • Perform mechanical system design analysis and properly select HVAC and equipment and complete energy compliance forms., • Participate in Premieres, project retrospectives and continuous improvement activities., • Respond to RFIs and review submittals with oversight from senior design staff., • Engage in ongoing learning and professional development to improve technical knowledge., • Bachelor's degree in Architectural, or Mechanical Engineering required plus 6+ years of demonstrated experience required., • Demonstrates strong REVIT/AutoCAD and office computer proficiency., • Strong understanding of local codes and amendments, with the ability to interpret and apply the codes towards system design and calculations., • Bachelor's degree in Architectural, Mechanical, or Construction Engineering plus 8+ years of applicable experience, • Professional Engineering (PE) license

Job Description HiFyve is hiring a Quality Assurance Manager in the Heavy Manufacturing industry in Riverside, MO! Salary: $115K - $125K Shift: Days Location: Riverside, MO Job Summary: Join a highly respected precision manufacturer specializing in large-scale welded, machined, and custom-engineered assemblies supporting the marine, defense, and industrial sectors. This role is ideal for a hands-on Quality Manager or a senior-level Quality Engineer ready to step into leadership and elevate a growing ISO 9001 environment. You will oversee a small but capable team, partner heavily with engineering and production, and drive the quality discipline required for tight-tolerance, high-mix/low-volume manufacturing.. Key Responsibilities: • Lead and strengthen the ISO 9001 Quality Management System, including procedures, document control, audits, and continuous improvement., • Oversee incoming, in-process, and final inspection activities, ensuring compliance with prints, tolerances, weld specs, and customer requirements., • Lead root cause analysis and corrective actions using 8D, DMAIC, and structured problem-solving tools., • Manage PPAP, APQP, control plans, and first article processes for machined and welded components., • Collaborate with engineering on print reviews, GD&T interpretation, nonconformances, and disposition., • Serve as the quality liaison for customer audits, technical reviews, and contract requirements (marine/defense)., • Develop quality metrics, reports, and data-driven improvements for scrap, rework, and process capability., • Coach, mentor, and elevate quality inspectors and technicians in daily floor support. Knowledge, Skills, and Abilities: • Bachelor’s degree in Engineering, Manufacturing, or related technical discipline (preferred)., • 3–7+ years in Quality Engineering or Quality Management within heavy manufacturing, machining, fabrication, or precision assemblies., • Strong working knowledge of GD&T, print interpretation, metrology tools, and tight-tolerance machining., • Hands-on experience with welded assemblies, fabrication processes, and mechanical inspection., • Proven ability to lead corrective actions, drive quality culture, and communicate across production, engineering, and customer teams., • Familiarity with ISO 9001, PPAP, APQP, internal/external audits, and supplier quality processes. If you are interested, please apply.

Job DescriptionDescription: Dialectic is a full-service mechanical, electrical, and plumbing (MEP) engineering design and consulting firm with Headquarters located in the Crossroads of Kansas City, Missouri. Dialectic has a reputation for delivering inventive, flexible, and sustainable MEP designs for clients across the US. The Electrical Engineer/Designer will collaborate will with staff to create accurate technical drawings and contribute to the overall design process for our MEP Engineering firm which focuses on the design of systems for business, retail, housing, education, and entertainment industries. This position can be considered for a remote role. Key Responsibilities: • Performs calculations and designs engineering systems with a high degree of independence, • Prepares basic to advanced electrical system layouts, detailed drawings and schematics, • Coordinate design requirements and decisions with other disciplines, BIM department, and project management, • Performs research and makes recommendations as to the feasibility of systems or equipment. Evaluates products for their application, • Attend client meetings with project managers and senior staff, continuing to grow relationships with staff and clients, • May assist with or oversee project coordination tasks, including managing emails, coordinating scope and schedule, ensuring project quality, addressing client inquiries, and facilitating project delivery, • Participate in Premieres, project retrospectives and continuous improvement activities, • Travel as required, independently or with less senior staff for site surveys and field inspections, • 10 + years of applicable work experience if no Engineering degree, • Intermediate proficiency in Revit and Bluebeam Revu, • Strong understanding of local codes and amendments, with the ability to interpret and apply the codes towards system design and calculations, • Strong familiarity with building structures, mechanical, electrical, and plumbing systems and how they interact, • Bachelor's degree in Electrical or Architectural Engineering and 8 years of relevant experience preferred, • Professional Engineering (PE) license To all recruitment agencies: Dialectic does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of Dialectic without a prior written search agreement will be considered unsolicited and the property of Dialectic. Please, no phone calls or emails. NOTICE TO CANDIDATES: RECRUITMENT FRAUD ALERT Dialectic representatives conduct all email communications exclusively through a company email address that ends with @dialecticeng.com. We extend offers of employment only after a comprehensive interview process and will never ask you for a payment of any sort nor offer one for any reason. Dialectic will not ask any applicant to purchase equipment, nor offer to reimburse any applicant for expenses incurred prior to employment. We will not request personal information until a legitimate offer of employment has been extended. If you suspect a recruitment attempt is fraudulent, you should cease communications. You may contact us at to verify whether a recruitment contact is legitimate. All legitimate job opportunities are posted on our company website’s careers page.

Job Description Engenious has an opportunity for a detail-oriented Mechanical CAD Technician who likes variety. The Technician works with a team of mechanical engineers to communicate design standards in drawings and other forms of documentation for life-saving technology systems that do good in the world! Not just a desk job, this position has the opportunity to get hands-on making and testing prototypes in our engineering prototype labs. Growth opportunities for this role might be mechanical engineer or senior level rock-star technician. KEY RESPONSIBILITIES: • SolidWorks drawings of mechanical components, assemblies and systems., • Collaboration with design teams: design intent/specifications, design reviews, documentation updates, part inspection, status updates., • Support of teams and maintaining 3D models of parts and assemblies., • Manage templates, PDM workflows and best practices., • An associate degree in mechanical drafting, CAD technology, or related field. Or 2+ years industry experience., • Familiarity with drafting best practices and standards like ASME Y14.5., • Solidworks proficiency., • Experience applying GD&T, • Experience designing plastic and metal parts, • Solidworks drawing or modeling certification This is a full-time, permanent position. This position works from our Kansas City based office during core business hours. Powered by JazzHR 5hnlTExcNn

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description We are seeking a highly capable and motivated Mechanical Engineer III with a strong focus on HVAC system design to join our growing team. This role is responsible for leading the mechanical scope on small to medium-sized projects of intermediate complexity, including new construction, renovations, and process-driven facilities. The Mechanical Engineer III will manage HVAC and mechanical utility design efforts, coordinate with multidisciplinary teams, and ensure high-quality, code-compliant, and constructible solutions. This position offers the opportunity to act as Engineer-of-Record, mentor junior staff, and contribute to the development of CRB’s technical standards and project delivery excellence. Key Responsibilities • Lead the design and engineering of HVAC systems including airside, chilled water, heating hot water, steam, and exhaust systems., • Develop mechanical utility systems such as compressed air, natural gas, and process piping., • Perform engineering calculations including load analysis, pressure drop, and equipment sizing., • Prepare and review technical documentation including:, • Design reports, narratives, and specifications, • P&IDs, system schematics, plans, and installation details, • Energy modeling and utility assessments, • Coordinate with architects, engineers, clients, construction managers, vendors, and trade partners to ensure integrated and constructible designs., • Manage mechanical discipline scope, budget, and schedule on assigned projects., • Support proposal development, task planning, and project scheduling., • Lead quality assurance efforts and participate in internal design reviews., • Conduct field surveys, identify non-compliant conditions, and support construction administration activities (e.g., RFIs, submittals, punch lists)., • Mentor junior engineers and designers and contribute to internal training initiatives., • Act as Engineer-of-Record for small to medium-sized projects when serving as Lead Mechanical Engineer.Qualifications Minimum Qualifications • Bachelor’s degree in Mechanical Engineering or Architectural Engineering (mechanical focus) from an ABET-accredited program., • Minimum of 5 years of experience in mechanical engineering., • Professional Engineer (PE) license in good standing., • Experience in life sciences (pharmaceutical, biotech, laboratory) or food & beverage industries., • Familiarity with GMP manufacturing environments., • Proficiency in Revit, AutoCAD, Microsoft Office Suite, and Bluebeam Revu., • Knowledge of mechanical, plumbing, fire protection, and building codes., • Experience with industry standards (ASHRAE, SMACNA, ISPE, FDA, ISO, NFPA, OSHA)., • Intermediate experience in plumbing design and documentation., • Familiarity with Revit plugins (e.g., Enscape, Unifi) and parametric tools (e.g., Dynamo, Grasshopper, Rhino)., • Strong coordination skills across disciplines and with construction partners., • LEED, WELL, or other sustainable design credentials or experience., • Ability to troubleshoot mechanical systems and support field implementation. #LI-JV1 Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job DescriptionCompany Description CRB is a leading provider of sustainable Engineering, Architecture, Construction and Consulting solutions to the global life sciences and food and beverage industries. Our employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description As an Automation, Instrumentation, and Controls (AIC) Engineer II at CRB, you will play a key role in designing high-performance processes and facilities that make a lasting impact. You’ll contribute to both small and large-scale projects, supporting all phases of design and documentation within a multidisciplinary team. Your expertise in mechanical system controls, process automation, and regulatory standards will help solve complex challenges with a balance of technical precision and design excellence. Key Responsibilities • Collaborate with senior engineers to execute design tasks and project deliverables., • Design automation systems of moderate complexity, ensuring compliance with applicable codes and coordination across disciplines., • Develop documentation including narratives, reports, drawings, and diagrams for construction., • Perform engineering calculations such as control element sizing and instrumentation selection., • Conduct field investigations to integrate new designs with existing systems., • Utilize platforms such as Microsoft Office, BIM software, and vendor tools to complete work., • Coordinate effectively with internal and external teams, including architects, engineers, vendors, and construction partners., • Support and lead small projects through all design phases: programming, planning, feasibility, scope development, detailed design, construction documentation, and administration., • Mentor entry-level staff and delegate basic tasks as needed., • Participate in professional development activities to expand technical knowledge.Qualifications, • Bachelor’s degree from an ABET-accredited program in Chemical, Mechanical, or Electrical Engineering., • Proficiency in AutoCAD, Revit, and Microsoft Office., • Fundamentals of Engineering (FE) exam registration or completion., • Experience with instrumentation and controls engineering calculations., • Familiarity with control system schematics, panel fabrication drawings, and field wiring plans., • Ability to read and interpret Piping and Instrumentation Diagrams (P&IDs)., • Working knowledge of electrical codes, building codes, and industry standards., • Strong coordination skills with cross-discipline teams and external stakeholders., • Ability to perform design calculations under the guidance of senior engineers. #LI-HYBRID #LI-JV1 Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job DescriptionDescription: Are you ready to join a dynamic team dedicated to exceeding customer expectations while driving business growth? Mead O'Brien is seeking a Technical Sales Representative to play a pivotal role in promoting our corporate mission and vision. If you're passionate about providing exceptional service, adept at understanding technical requirements, and thrive in a fast-paced environment, we want to hear from you! Primary Responsibilities: • Sales and Promotion: Utilize technical knowledge to sell and promote our products, systems, and services., • Product Customization: Work closely with production engineering to tailor products or services to meet customer needs., • Customer Relationship Management: Provide training, guidance, and responsive communication to ensure customer satisfaction and loyalty., • Business Development: Identify and pursue new business opportunities to expand our market share., • Technical Expertise: Develop a deep understanding of our products and services to effectively address customer inquiries and concerns.Requirements:, • Education and Experience: College engineering or technology degree preferred, or significant industry experience., • Technical Skills: Proficiency in Microsoft Office and AutoCAD applications, with the ability to interpret mechanical or engineering diagrams/specifications., • Problem-Solving Skills: Demonstrate a positive attitude, mechanical aptitude, and strong problem-solving abilities., • Communication: Clear verbal and written communication skills are essential for effective interaction with customers and internal teams., • Customer Focus: Exhibit a strong desire to provide exceptional service and support to customers., • Self-Motivation: Ability to work independently and proactively in a dynamic environment.

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Are you an experienced Mechanical Engineer with a passion for designing innovative solutions in the healthcare sector? As a Senior Mechanical Engineer on Olsson's Facilities Engineering and Design Team, you'll provide high-level technical support and lead quality assurance/quality control (QA/QC) activities that drive excellence in healthcare facilities design. In this role, you'll apply your expertise to independently make recommendations and decisions that enhance the design and functionality of healthcare environments. You'll work on complex projects, develop unique solutions, and ensure that our designs meet the highest standards of quality and efficiency. Primary Responsibilities: • Lead the design and review of mechanical systems for complex healthcare facilities projects., • Serve as a technical specialist, applying advanced mechanical engineering concepts to address the unique challenges of healthcare environments., • Perform QA/QC and ensure that mechanical designs meet project objectives and regulatory standards., • Conduct research to inform innovative design solutions that improve patient care and operational efficiency., • Advise and direct staff on mechanical design approaches to meet project requirements and client expectations., • Collaborate with multidisciplinary teams to integrate mechanical systems seamlessly into overall project designs., • Contribute to the development of standards and guidelines for mechanical engineering activities within the team. Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills., • Proven ability to collaborate effectively within a team., • Excellent interpersonal and problem-solving abilities., • Bachelor's degree in Mechanical Engineering., • Registered Professional Engineer (PE) license., • At least 8 years of mechanical engineering experience with increasing responsibility, preferably in healthcare facilities design., • Healthcare-related certifications such as ASHRAE Healthcare Facilities Design Professional (HFDP), ASSE 6060 Medical Gas Systems Designer, and/or ASSE 12080 Certified Legionella Water Safety & Management Specialist are a plus., • Membership in a state or national chapter of the American Society of Healthcare Engineers (ASHE) or equivalent is advantageous. Experience with National Codes/Standards development and participation in relevant committees is highly preferred., • Healthcare-related certifications, such as Certified Healthcare Constructor (CHC) or Healthcare Physical Environment Worker, are a plus., • Demonstrated expertise in leading complex mechanical design projects and providing technical leadership within a team., • Enthusiasm for advancing the healthcare industry through innovative and reliable mechanical engineering solutions. #LI-RS1 #LI-Hybrid Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job Description Join Orange EV, a fast-growing manufacturer of electric vehicles that are better for the earth, people, and the bottom line. Make a difference for the world as part of a company leading the electric vehicle revolution. Position Summary We are seeking an Electrical Vehicle Assembler for Orange EV’s facility in Kansas City, KS Position Responsibilities • Tear down and assembly of heavy-duty electric trucks by work instructions, • Ensure the implementation of quality and safety procedures, • Identify and correct defects in product or workmanship, • Be excited about joining and helping build a young company, • Previous experience in automotive or electrical assembly line work (e.g. semi tractors, heavy equipment, farm equipment, terminal trucks), • Strong mechanical aptitude, • Ability to lift up to 75 lbs., • Ability to read & understand engineering drawings, • Ability to embrace new technologies and ideas, • Strong written and verbal communication skills, • Adherence to policies and procedures (e.g., safety) Education/Experience • High school diploma required with 3+ years of experience in a related field, • Specialized training in engineering or mechanics (military or trade school), • Welding (e.g., TIG, use of plasma cutter) and fabrication experience, • Electrical wiring experience. Orange EV is an Equal Opportunity Employer and seeks diversity in candidates for employment. EEO Employer W/M/Vet/Disabled/Sexual Orientation/Gender Identity #LI-DNI

Job DescriptionTerritory Sales Engineer Location: MO/KS Region Work Setup: Remote (work from home when not traveling) Travel: Up to 60% within region Pay: $90,000–$100,000 (based on experience) About the RoleWe’re seeking a motivated Territory Sales Engineer to drive growth by developing new business and expanding existing customer relationships. This role blends technical expertise with strategic sales skills to deliver customer-focused solutions and achieve territory goals. What You’ll Do • Develop and execute business plans to achieve sales growth and account penetration targets., • Identify and pursue new business opportunities while maintaining and expanding relationships with existing customers., • Translate complex technical specifications into clear, compelling value propositions., • Communicate regularly with Sales Management on account status, market trends, and competitor activities., • Manage customer inquiries, orders, and issues with professionalism and urgency., • Collaborate with cross-functional teams and attend industry events or trade shows to strengthen market presence., • Support fellow sales team members and share market insights to contribute to overall team success.What We’re Looking For, • Bachelor’s degree in Mechanical or Electrical Engineering, or equivalent experience., • 3–5 years of technical sales experience, ideally selling to OEMs in motion control or related industries., • Excellent communication, presentation, and CRM skills., • Strong organizational skills with attention to detail and the ability to manage multiple priorities., • Valid driver’s license and willingness to travel up to 60% weekly.Why Join UsThis is an opportunity to make a meaningful impact by driving growth, building trusted customer relationships, and representing innovative products in a dynamic, technology-driven industry.

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Are you a licensed Mechanical Engineer with a passion for designing innovative solutions in the healthcare sector? As a Mechanical Engineer on Olsson's Facilities Engineering and Design team, you'll perform standard engineering techniques and procedures, applying sound judgment to make minor adaptations and modifications. In this role, you'll contribute to generating ideas and creating designs that meet the highest standards of quality and efficiency for healthcare facilities. Primary Responsibilities: • Perform various engineering duties related to evaluating, designing, and constructing plans for small to large-sized healthcare projects., • Assist in preparing project documents and maintain knowledge of project scope, schedule, and budget., • Conduct process design calculations, analyze reports, and prepare cost estimates to assess project feasibility., • Apply knowledge and experience with standard techniques, methods, and procedures to assist with coordination of project design aspects., • Communicate project development and progress with project managers and clients., • Enter and maintain project information and client records in the firm's project management system., • Evaluate and propose adaptations to standard methods and procedures for components of assignments., • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills., • Ability to collaborate effectively within a team., • Excellent interpersonal and problem-solving abilities., • Bachelor's degree in Mechanical Engineering., • Registered Professional Engineer (PE) license., • A minimum of 4 years of mechanical engineering experience, with at least 2 years specifically in designing for healthcare projects., • Enthusiasm for contributing to the healthcare industry through innovative and reliable mechanical engineering solutions., • Healthcare-related certifications such as ASHRAE Healthcare Facilities Design Professional (HFDP), ASSE 6060 Medical Gas Systems Designer, ASSE 12080 Certified Legionella Water Safety & Management Specialist, Certified Healthcare Constructor (CHC), and/or Healthcare Physical Environment Worker, are a plus. #LI-DNI #LI-Hybrid Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionJob Title: Project CoordinatorJob Description The primary objective of this role is to provide administrative support to the Project Management team, ensuring the accurate and timely flow of delivery paperwork, scheduling, and order maintenance. Responsibilities • Coordinate release work with Sales, Project Managers, and Operations personnel to execute delivery schedules., • Master the fundamentals of sales order entry, part creation, purchase requisitions, and part maintenance., • Enter sales orders into the system, print and email delivery tickets, bills of lading, product labels, and related paperwork., • Create purchase orders and issue them to vendors promptly to avoid delays in contractual schedules., • Execute daily production entry reports, handle raw material receiving and issuing, manage inventory, and conduct cycle counting., • Create and submit customer invoices, reconcile external billings, and project financials to avoid over/under billing., • Assist with contracting outside trucking brokers for product configuration and load/unload scheduling at plants and jobsites., • Answer and return internal and external customer calls promptly, handling issues swiftly and professionally., • Balance relationships with Sales, Operations, and other Project Managers to achieve accountability and desired outcomes.Essential Skills, • Resourceful and proactive in seeking information., • Demonstrated problem-solving skills and quick thinking., • Sense of urgency and professionalism in customer service., • Ability to self-manage priorities and follow up effectively., • Pride in work product and strong work ethic., • Self-starter with an interest in learning about company products and processes., • Strong communication skills, both verbal and analytical/critical thinking.Additional Skills & Qualifications, • Experience in manufacturing, engineering, mechanical, and/or electrical control is a plus., • Associates degree or equivalent vocational training. Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Short Term & Long Term Disability Workplace Type This is a fully onsite position in Kansas City,KS. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description As a BMS/Control Systems Design Engineer you will be joining a fun, growing, team of other Electrical and Control System Engineers, Control System Integration Engineers, and Technicians. Your primary role will be designing instrumentation and control systems for Data Centers. Projects range from high level conceptual designs, detailed site designs and retrofits, factory witness testing of equipment, and construction administration and verification. This role will communicate and coordinate with other engineering disciplines, teams, subconsultants, clients, vendors, and contractors to learn, implement, and verify Data Center Building Management Systems are designed and constructed properly. You will be responsible for managing your tasks including the Building Management System (BMS) design, specifications, and drawings. This position may require occasional travel to project sites for meetings, information collection, and construction administration. Additional duties will include: • Selection and specification of process instrumentation., • Selection and specification of Programmable Logic Controllers (PLCs) and Human Machine Interface (HMI) equipment., • Selection and specification of networking components and media including copper, fiber, and wireless hardware., • Development of control system (BMS) sequences of operations., • Submittal review and field inspections., • Working collaboratively with others, • Having ownership in the work you do, • Strong communication skills., • Ability to contribute and work well on a team., • 6+ years of experience., • Attention to and passion for detail., • Professional engineering license preferred., • Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related field preferred. #LI-DNI #LI-TM1# Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description We’re seeking a highly skilled and motivated Lead Process Utilities Engineer to guide discipline-level execution across projects of varying size and complexity. This role is ideal for someone who thrives in a fast-paced, collaborative environment and is passionate about delivering high-quality engineering solutions in the life sciences industry. As a Lead Engineer, you’ll oversee project budgets, coordinate with internal and external stakeholders, and mentor junior staff. You’ll play a critical role in shaping project outcomes—from concept through commissioning—while driving innovation and excellence. Key Responsibilities • Lead discipline design efforts and manage budgets for projects ranging from simple to highly complex., • Collaborate with Project Managers on proposals, staffing plans, and schedules., • Serve as the primary point of contact for clients, internal teams, and external partners., • Conduct quality reviews of technical documents and ensure compliance with industry standards., • Direct and mentor engineering support staff across multiple projects., • Deliver internal training presentations to elevate team capabilities., • Oversee or lead advanced design activities such as:, • Utility room layout development, • Pipe routing and space planning, • Capacity planning and expansion strategy, • Vendor package management, • Risk assessments (HAZOPs, HCCPs, etc.), • 3D model reviews and coordination, • Site walkdowns and field reporting, • Commissioning and startup supportQualifications, • Bachelor’s degree in Chemical or Mechanical Engineering from an ABET-accredited program., • Minimum 10 years of experience for Lead-level candidates; 15+ years for Senior-level., • Proven experience in design firms, operating companies, or construction environments., • Professional Engineering (PE) License., • Strong leadership and communication skills., • Experience across diverse facility types and systems in the life sciences sector., • Robust technical network including clients, vendors, and trade partners., • Demonstrated success leading large or complex technical projects., • Advanced coordination skills across disciplines and with external stakeholders. #LI-JV1 #LI-HYBRID Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job DescriptionIf you want to work for a reputable Engineering Firm with an amazing company culture (work/life balance) and a path for growth then apply now! This Jobot Job is hosted by: Jennifer Thomas Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $90,000 - $120,000 per year A bit about us: We are a 20+ years strong Engineering Firm offering mechanical and electrical design services for the building and construction industry. Our company consists of designing projects for various building industries that include commercial, tenant finish, healthcare, mission critical, industrial and educational, corporate and governmental facilities. Mechanical design services include HVAC, building automation, temperature control, hydronics, plumbing, indoor air quality control and humidification control, central energy plant design and energy performance design. Electrical design services include lighting, power distribution, communications, emergency and standby power systems, grounding, exterior and site lighting and fire/life safety systems. We have a family first, fun company culture and a very supportive environment. Why join us? Competitive Base Salary and Bonus Structure (2 times/year). 100% Health Insurance, Dental and Disability coverage for the employee and partial coverage for dependents. 401K retirement account and profit sharing. Paid time off and give back community day. Life Insurance. Company activities and outings. Job Details We are looking for a driven Mechanical Engineer / Project Manager to join our team in Kansas City, KS! Responsibilities: • Designing HVAC and Plumbing Systems for a variety of project types., • Performing HVAC load calculations., • Sizing of mechanical equipment, ductwork, hydronic piping and plumbing piping., • Manage the entire MEP team so ensure schedules and work assignments are met for successful project completion., • Check design deliverables in accordance with industry codes and standards, contract requirements, and company standards., • Interact and coordinate with the design and construction project team., • Write and edit projects specifications., • Review project submittals, respond to project RFI’s during construction administration phase of project., • BS Degree in Mechanical Engineering or similar., • A minimum of 4-8 years of experience in engineering., • Professional Engineering License in KS is preferred., • Experience with HVAC and Plumbing Systems, equipment selection, material lists, contract documents and drawing review., • Strong understanding of building codes and standards., • Proficient with Revit, AutoCAD and Microsoft Office. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionSenior Automation & Controls Engineer – Food & BeverageLocation: Kansas City, MOEmployment Type: Permanent, Full-TimeTravel: Up to 25% Domestic Benefits: Full benefits package including medical, dental, vision, 401(k), paid time off, and professional development support. This role offers long-term stability, leadership opportunities, and clear paths for career growth in a collaborative, innovation-driven environment. About the Role:We are seeking a Senior Automation & Controls Engineer to lead and support complex automation projects in the food & beverage manufacturing sector. This position is ideal for a seasoned engineer who thrives in fast-paced environments and enjoys working across disciplines to deliver high-impact solutions. Key Responsibilities: • Lead the design and implementation of automation systems for food & beverage facilities, • Develop control strategies using PLCs, HMIs, and SCADA systems (Rockwell, Siemens, etc.), • Design network architecture, control panels, and operator interfaces, • Perform I/O checkout, startup services, and system documentation, • Collaborate with process, packaging, mechanical, and electrical engineering teams, • Serve as a single point of contact for clients, ensuring accountability and streamlined communication, • Ensure compliance with food safety regulations (e.g., FSMA), sustainability practices, and quality standards, • Mentor junior engineers and contribute to team development, • Bachelor’s degree in Electrical Engineering, Automation, or related field, • 7+ years of experience in automation and controls engineering, preferably in food & beverage manufacturing, • Strong proficiency in PLC/HMI programming and industrial networking, • Experience with control system integration, panel design, and operator interface development, • Familiarity with food safety and regulatory compliance standards (FSMA, GMP, etc.), • Knowledge of process and sanitary design, packaging systems, and material handling, • Excellent communication, leadership, and project management skills, • Experience with BIM modeling and 3D coordination, • Exposure to cogeneration systems and wastewater process design, • Understanding of supply chain management and speed-to-market strategies, • Familiarity with sustainability practices and waste-reducing measures, • Projects ranging from site selection and permitting to full-scale design, construction, and startup, • High-speed packaging systems (e.g., up to 2,000 cans per minute), • Precision ingredient processing requiring accuracy down to the gram, • Integrated design-build delivery with cross-functional engineering and construction teams, • Work with a team that delivers industry-leading results in cost and schedule performance, • Be part of a company that integrates engineering and construction for seamless project execution, • Contribute to projects that nourish the future—from frozen foods to pet nutrition, • Enjoy a culture that values curiosity, collaboration, and continuous improvement

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description We are seeking a motivated and detail-oriented Mechanical Engineer II to support the design and engineering of HVAC, mechanical utilities, and plumbing systems for advanced technology facilities. This role involves executing design tasks under the guidance of senior engineers and contributing to all phases of project delivery—from conceptual design through construction administration. In addition to HVAC and mechanical systems, this position places a strong emphasis on plumbing design, including domestic water, sanitary waste, storm drainage, and specialty piping systems. The ideal candidate will have foundational experience in plumbing engineering and a desire to grow their expertise in this area while working on complex, multidisciplinary projects. Key Responsibilities • Design mechanical systems of basic complexity, including HVAC, mechanical utilities, and plumbing systems, in compliance with applicable codes and standards., • Perform engineering calculations such as load analysis, pressure drop, and equipment sizing., • Develop system schematics, P&IDs, plans, schedules, and installation details., • Assist in the development of construction drawing packages and specifications with oversight., • Support plumbing design tasks including:, • Domestic cold and hot water systems, • Sanitary and storm drainage systems, • Natural gas and compressed air systems, • Specialty piping (e.g., purified water, process waste), • Conduct field surveys and integrate design with existing conditions., • Collaborate with architects, engineers, designers, vendors, and trade partners to ensure coordinated and constructible designs., • Participate in squad checks and contribute to quality assurance efforts., • Support construction activities including RFIs, submittal reviews, punch lists, and progress reports., • Mentor junior designers and contribute to internal training efforts., • Attend professional development activities and expand technical skill sets.Qualifications Minimum Qualifications • Bachelor’s degree in Mechanical Engineering or Architectural Engineering (mechanical focus) from an ABET-accredited program., • Minimum of 3 years of experience in mechanical engineering., • Completion of the Fundamentals of Engineering (FE) exam., • Proficiency in Revit, AutoCAD, Microsoft Office Suite, and Bluebeam Revu., • Experience in life sciences (pharmaceutical, biotech, laboratory) or food & beverage industries., • Familiarity with mechanical, plumbing, fire protection, and building codes., • Knowledge of industry standards (ASHRAE, SMACNA, ISPE, FDA, ISO, NFPA, OSHA)., • Experience conducting field surveys and supporting field reporting., • Foundational experience in plumbing design and documentation., • Exposure to Revit plugins (e.g., Enscape, Unifi) and parametric tools (e.g., Dynamo, Grasshopper, Rhino)., • Strong coordination skills across disciplines and with construction partners., • LEED, WELL, or other sustainable design credentials or experience. #LI-JV1 Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Description Company Background: Since our founding in 1883, UltraSource has served the processing and packaging equipment needs of thousands of companies worldwide in the meat, poultry, seafood, and dairy industries. Our comprehensive offering includes hundreds of products that enable us to custom tailor equipment solutions that meet the production line objectives, labor goals, budget constraints and brand image of our customers. UltraSource's quality program ensures our products are engineered and produced to meet or exceed our customers' requirements. Reliability, maintainability, and safety are at the forefront of our engineering strategy and support to our dedication to quality. Summary: Provide technical support for equipment in-house and at customer locations including installation, training, repair and customer support. Essential Duties and Responsibilities: • Performs installations of all product lines at customer's facility to ensure full functionality according to specifications., • Investigate and resolve customer reports of technical issues with equipment, and eliminate future operational or service difficulties., • Coordinate problem resolution with engineering, manufacturing, and other personnel., • Maintains accurate records of performance reports, expenses, billable hours, and trip reports. Documents cases in CRM database in a timely fashion., • Provides a communication link between the customer and the company to help ensure that technical support and effective service is provided to the customer., • Certification from college or technical school; or a minimum of 5 years related experience and/or training; or equivalent combination of education and experience., • Vocational training or apprenticeships in electrical and mechanical skills (specifically schematics and wiring diagrams), industrial control systems, PLC relay logic and 3 phase motors preferred., • HVAC certification or experience preferred., • CRM software and MS Office (Word, Excel, Outlook, Forms, Teams), • Bi-lingual/Spanish capabilities a plus, but not required. Physical Demands: Must be able to fulfill all essential job functions in a consistent state of alertness and in a safe manner. While performing the duties of this job, the employee is regularly required to sit, use hands to feel and manipulate, and requires the ability to talk and hear. The employee is occasionally required to stand, walk, reach with hands and arms, stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment: While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and risk of electrical shock. Due to the travel functions of this position, you are also subject to extreme temperature changes such as those found in warehouses, meat lockers, etc. The noise level in the work environment is usually moderate.

Job DescriptionDescription: DIT-MCO International, a trusted name in wire harness testing and aerospace innovation for over 75 years, is seeking an Electronics Assembler to join our team. As a member of the team, you can expect. • Competitive Pay! $20 per hour - or more depending on qualifications and experience., • Excellent Daytime Schedule - Monday through Thursday - 6:00am to 4:30pm - 3-day Weekend!, • Generous benefits package: medical, dental, vision, life insurance, short- and long-term disability, PTO, 401(k) with company match, and more!, • Advancement opportunity, • Great work environment - Work in a clean, well-lit environment in your own workspace with a family-oriented atmosphere! About the Role As an Electronic Assembler at DIT-MCO International, you’ll play a hands-on role in building precision electronic components that support the aerospace industry. Using a variety of hand tools and assembly machines, you'll follow detailed engineering drawings, schematics, wire lists, and written work instructions to complete high-quality assemblies. In this role, you will be a part of something bigger. The products you help build are used in some of the most advanced aircraft, defense systems, and aerospace programs in the world. Your work will directly support missions that demand the highest levels of quality and reliability. What You’ll Do Performs assembly of electronic parts using hand tools and assembly machines. Uses special machines for special product assembly. This assembly will be done from instructions on engineering drawings, written work instructions, process plans, schematics, wire lists, or other written or verbal instructions. Includes functions such as measuring and cutting wire, pulling cables, installation of terminals on wires, crimping, pinning, wiring cables, loading PCA’s (printed circuit assembly) with components, hand soldering, full electrical/mechanical assembly of more complex electronic chassis assemblies. What You Bring One year of previous electronics/electrical assembly experience preferred. Basic math abilities, ability to perform repetitive tasks maintaining quantity and quality. Strong interpersonal and communication skills. High school diploma or equivalent. US citizen. DIT-MCO offers competitive compensation, great benefits, and the chance to make a difference with your designs. We value attention to detail, initiative, and the desire to contribute to something larger than yourself. Apply today and help shape the future of aerospace and defense testing. Requirements: Skills • Strong interpersonal skills and team player., • Basic math skills., • Ability to perform repetitive tasks while maintaining quantity and quality., • Must be able to work independently., • Strong organizational skills and attention to detail, quality, and efficiency., • Capable of following detailed written or verbal instructions., • Handle sensitive information discreetly and confidentially., • Good or corrected vision and can distinguish colors., • Lifting, bending, walking, and the ability to sit or stand for long periods., • Mobility and full dexterity., • Capable of operating in a fast-paced environment, meeting deadlines, working on multiple job functions, and dealing with stressful situations., • Ability to lift and carry up to 50 lbs.

Job Description HiFyve is hiring a Field Service Technician in the Injection Molding industry! Pay: $40/hour + ~10 hours of overtime per week Schedule: Monday–Friday travel with occasional work-from-home Location: Kansas City, MO Travel: Frequent travel required (primarily weekdays); per diem provided; quarterly travel bonus for >30% travel About the Role: We’re looking for a mechanically and electrically inclined Field Service Technician to join a leading team in the injection molding machinery industry. This is a hands-on role focused on troubleshooting, diagnosing, and repairing injection molding machines at customer sites across the Midwest. You’ll also provide remote support when not traveling and collaborate closely with internal teams to ensure best-in-class customer service. Key Responsibilities: • Travel to customer sites to troubleshoot, diagnose, repair, and maintain injection molding machines (e.g., Toyo, FCS), • Assist customers remotely via phone and email when not traveling, • Interpret and communicate engineering plans, schematics, and specifications, • Collaborate with sales and parts teams to ensure seamless service delivery, • Bachelor's degree in Engineering or equivalent technical experience preferred, • Ability to read electrical, mechanical, and machine prints, • Strong communication skills, both verbal and written, • Proficiency with hand tools and diagnostic equipment, • Ability to stand, walk, kneel, push, pull, and move in tight spaces, • Lift and carry up to 100 lbs, • Ability to climb on machinery up to 4 feet, • Strong visual acuity and color/depth perception, • Competitive hourly pay + generous overtime, • Per diem and quarterly travel bonus, • Great insurance options with low premiums, • Paid vacation and holidays, • 401(k) with company match, • Extensive on-the-job training If you are interested, please apply!

Job Description JOB SUMMARY • Plans and coordinates maintenance of equipment within a department in a proactive fashion to maximize equipment uptime and verifies repairs are effective., • Effectively utilizes computerized maintenance management systems., • Forms and leads teams to improve plant maintenance capabilities., • Accountable for planning and scheduling department maintenance, repair and installation of production machinery and equipment., • Schedules daily and weekend/down day maintenance work and maintains an up to date log of work that needs to be accomplished., • Provides technical expertise, guidance and leadership for Multi-crafts, Electricians and Mechanics., • Develops, implements, and maintains proactive maintenance practices., • Effectively utilizes CMMS system., • Plans, schedules and coordinates manpower requirements for department maintenance and equipment repairs to reduce equipment downtime minimize cost and contribute to production efficiencies., • Develops and implements a maintenance plan that is consistent with the TPM philosophy., • Determines root cause of equipment failures and implements solutions to eliminate repetitive downtime, • Works with vendors and contractors on maintenance projects, • Continually evaluates effectiveness of PM’s. Updates PM’s as needed, • Determines spare parts needs and requisitions necessary parts to meet these needs., • Bachelor’s degree in mechanical or electrical engineering or a combination of education and experience in the field., • Three to five years of experience in maintenance management/supervision. Minimum of two years manufacturing experience, prior supervisory experience is preferred., • Good working knowledge of Microsoft Word, Excel, Project, Access, SAP and SQL or equivalent. Familiar with CAD programs. The effectiveness of this position is measured by the timely completion of projects, with established budgets, that meet or exceed requirements through proper functioning, ease of operation and minimization of maintenance costs. This position requires experience in the types of equipment and facilities necessary to product steel freight car and locomotive wheels; experience in design, mechanical and electrical engineering; plus the ability to work with a wide range of people to successfully complete projects. #ff-ov

Job DescriptionIMKO Workforce Solutions is currently seeking Assemblers for a company in St. Joseph, MO. Pay rate: $20.65 Competitive Starting Wage with Shift Differential (2nd and 3rd shift)Assemblers are responsible forassemblingPedestals, Turntables, and Boom components - combined with other related assembly components - to produce world-class Equipment. Required Qualifications: • High School Diploma or GED required, • Ability to work 2nd and/or 3rd shift, • Some positions will require Automotive Electrical experience, • Mechanical assembly experience required, • Ability to read and understand technical documents – i.e., Engineering documents, schematics Preferred Qualifications:, • Vocational technical school certificate in a manufacturing field, • Hydraulic & Electrical (Automotive wiring) Skills, • Experience in the utility industry Responsibilities:, • To provide quality and timely workmanship on each job performed, • Reads blueprints and hydraulic diagrams, • Reads and understands tape measure, • Performs re-work as required, • Follows all established safety & quality policies and practices., • Learn and follow all work instructions and job qualification requirements, • Prepare and fit multiple components together, • Learn and operate all equipment within the department, • Support APS initiatives – Lean Manufacturing, • Willing to move to other areas of production as neededOur Company: Family-owned since 1929, they specialize in the design, manufacture, sale, and service of aerial devices, digger derricks, cranes, telecom, and specialty equipment. We are the leading equipment and service provider for the electric utility, telecommunications, tree care, lights and signs, and contractor markets, supporting customers in over 100 countries throughout the world.

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description We’re looking for a seasoned Process Engineer IV to lead complex, multidisciplinary projects in the life sciences and food & beverage industries. This high-impact role combines deep technical expertise with strategic leadership, guiding process design from concept through commissioning. You’ll collaborate across teams, mentor junior engineers, and drive innovation in facility and system design. This is a high-priority position with visibility across the organization. You’ll be at the forefront of designing and delivering innovative, high-performance facilities that shape the future of manufacturing and science. Key Responsibilities • Lead Process Engineering Efforts: Oversee discipline-specific design and execution across large, complex projects, ensuring alignment with client goals, budgets, and schedules., • Project Strategy & Execution: Partner with Project Managers to develop proposals, plan resources, and shape project delivery strategies., • Technical Excellence: Develop and review process design packages, including PFDs, P&IDs, equipment specifications, and control strategies., • Field & Construction Support: Lead site walkdowns, field surveys, commissioning, and startup activities. Respond to RFIs, review submittals, and support construction teams., • Mentorship & Leadership: Guide and mentor junior engineers and designers, fostering technical growth and collaboration., • Advanced Design & Planning: Contribute to master planning, facility layout, capacity planning, and risk assessments (e.g., HAZOP, HCCP)., • Cross-Functional Collaboration: Coordinate with internal disciplines, vendors, and construction partners to ensure seamless project execution.Qualifications, • Education:, • ABET-accredited Bachelor’s in Chemical, Biological, or Mechanical Engineering, • Master’s degree preferred, • Experience:, • Minimum 10 years for Lead-level responsibilities, • Minimum 15 years for Senior-level responsibilities, • Experience in design firms, operating companies, or construction environments preferred, • Technical Skills:, • Strong understanding of regulatory codes and industry standards, • Proficiency in process modeling, simulation tools, and 3D coordination, • Professional Engineering License, • Strong communication and leadership skills, • Broad technical network across clients, vendors, and trade partners #LI-JV1 #LI-HYBRID Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job DescriptionGeotechnical/Environmental Driller (Experienced) Location: Tulsa, OK (preferred) or your market within TX/AR/MO/KS/CO/NM* Job Type: Full-Time Pay: $65,000 – $100,000 per year (DOE) + Quarterly Bonuses Expected Hours: 40–50 per week *For the right applicant, AIMRIGHT will consider basing a company drill rig in your market with a local Laydown Yard. Relocation to Tulsa is also available. Why AIMRIGHT AIMRIGHT Testing & Engineering is expanding. We specialize in projects across Texas, Arkansas, Missouri, Kansas, Colorado, and New Mexico, and from time to time take on select projects outside this area. We operate five well-maintained drill rigs and reward productivity with quarterly bonuses tied to rig performance. Join a values-driven team that prioritizes safety, precision, and teamwork. What You’ll Do * Perform geotechnical/environmental subsurface exploration and sampling (auger, mud rotary, rock drilling/coring). * Install standpipes, piezometers, monitoring wells, and related instrumentation. * Safely transport, set up, and operate drill rigs per plans, specs, and safety protocols. * Read/interpret project plans for site coordination and location accuracy. * Complete accurate sampling logs and field documentation. * Perform basic mechanical troubleshooting and routine maintenance. * Communicate professionally with project teams, site personnel, and clients. What It Takes * Experience: 1+ year in geotechnical/environmental drilling. * License: CDL Class A with a clean MVR (required or obtainable in short order). * Travel: Regional travel typical within TX/AR/MO/KS/CO/NM, with occasional out-of-region assignments as needed (overnights ~1–2 weeks bi-monthly or as projects require). * Physical: Lift 100 lbs., stand for extended periods, work in all weather. * Skills: Mechanical aptitude, strong safety mindset, clear verbal communication. Compensation & Benefits * Salary: $65,000 – $100,000 DOE * Bonuses: Quarterly, based on rig productivity * Benefits: 401(k), medical, dental, vision * Equipment: Five company-maintained rigs; strong logistics and safety support * Growth: Long-term career path in a stable, growing company Location & Mobility Options * Primary hub: Tulsa, OK (relocation support available). * Alternate base: For the right candidate, we will evaluate placing a company rig in your market with a local Laydown Yard, supported by AIMRIGHT logistics and safety systems. * Where we work: Core markets are Texas, Arkansas, Missouri, Kansas, Colorado, and New Mexico; we occasionally accept projects outside this area. Schedule * Monday–Friday; occasional nights/weekends as project needs dictate. * Overnight travel required (typically 1–2 weeks bi-monthly or as needed). Join AIMRIGHT and advance your drilling career with a company that C.A.R.E.S. about quality, safety, and growth. Apply today and become part of a high-performing team. Powered by JazzHR SUlJxfMNn2

Job Description Mechanical Assemblers Starts out at $21/hour, WILL INCREASE TO $28/HOUR AFTER 1 YEAR. Shift: 1st shift 6AM-4:30PM Monday-Thursday (up to 8 hours of overtime.) Job Description We are seeking a skilled Assembler to join our team in assembling stainless steel laboratory equipment. This position requires the ability to perform full-cycle assembly and testing independently, utilizing hand tools, and reading blueprints and schematics. Responsibilities • Assemble stainless steel lab equipment using hand tools., • Perform full-cycle assembly and testing independently., • Read and interpret blueprints and schematics daily., • Troubleshoot and repair equipment with some assistance., • Proficiency in reading and interpreting engineering drawings, wiring schematics, and work instructions., • Ability to lift between 50 to 75 lbs., • 2 years of recent assembly experience or related experience., • High school diploma required., • Previous industrial assembly experience is advantageous. Join a dynamic team where your skills in assembly are valued and cultivated. Enjoy a clean and supportive work environment with opportunities for growth and a competitive pay structure. Our facility fosters a collaborative atmosphere and offers a unionized workplace ensuring fair practices. Work Environment The work environment is a clean, sheet metal setting with a requirement for steel-toed boots, jeans, and a t-shirt. The department consists of about 10 people, providing a close-knit team atmosphere. The facility is not temperature controlled and spans over 160,000 sq ft. Work hours are Monday through Thursday, from 6 am to 4:30 pm, with potential overtime starting at 5 am. After 1 year of tenure the position goes to $28/hr! Job Type & Location This is a Contract to Hire position based out of Kansas City, MO. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Kansas City,MO. Application Deadline This position is anticipated to close on Jan 20, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Controls EngineerJob Description We are seeking a Controls Engineer with 1-2 years of experience. This role focuses heavily on troubleshooting and making quick modifications to ensure continuous line operation. The position involves adding scanners, cameras, and vision systems but does not require programming from scratch. Responsibilities • Troubleshoot and make quick modifications to maintain continuous production line operations., • Integrate and add scanners, cameras, and vision systems., • Work with PLCs, HMIs, and logic systems to resolve issues., • Collaborate with other controls engineers, technicians, and maintenance personnel.Essential Skills, • 1-2 years of experience as a Controls Engineer or in a related role., • Proficiency in PLC programming, specifically Allen-Bradley PLCs., • Experience with Robotic programming and automation systems., • Knowledge of JIT, ILVS, and batch manufacturing systems., • Familiarity with automotive component systems including Body, Trim, Chassis, Powertrain, Interior, and Electrical Systems., • Experience in manual and automated assembly systems, both mechanical and control systems., • Understanding of Industrial Safety Standards., • Proficiency with AutoCAD, RSLogix 5000, RSLogix 500, RS View, and Microsoft Office applications., • Experience in HMI programming with AB PanelView and PanelView Plus.Additional Skills & Qualifications As a Piston employee, they will be compensated OT over 45 hours at REGULAR rate. They also receive: Annual Bonus Target: 5% Annual Merit Increase: 3% Vacation: 3 Week (Prorate for 2025) Monthly Cell Phone Allowance: $50 Workplace Type This is a fully onsite position in Kansas City,MO. Application Deadline This position is anticipated to close on Jan 9, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionMid-size established architecture firm with a focus in healthcare, federal, civic and education projects looking for a Plumbing Engineer with 6+ years of experience This Jobot Job is hosted by: Henry Chung Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $120,000 - $140,000 per year A bit about us: We are looking for a Plumbing Engineer to support project teams in preparing plumbing system construction documents for healthcare, higher education, and commercial building projects. The Plumbing Engineer will collaborate with the project team throughout the design and construction phases, ensuring plumbing plans align with budget constraints, other design disciplines, and client requirements. Additional responsibilities include staying current with engineering trends, participating in professional development events, and maintaining connections with local industry professionals. The ideal candidate will have strong attention to detail and a passion for organization. Why join us? Flexible work hours Generous PTO accrual rate Paid holidays annually Competitive salaries Life, health, dental & vision coverage 401(k) plan Career growth Job Details Key Responsibilities: Lead technical design and quality control for assigned projects, including plumbing system calculations and layouts. Coordinate with other disciplines to ensure cohesive designs. Apply and uphold best practices in engineering methods. Produce construction documents for new buildings, renovations, and additions to existing facilities. Handle construction administration tasks, including site visits and shop drawing reviews as required by the project. Identify and implement strategies to improve cost-efficiency. Develop comprehensive project specifications. Update and correct drawings based on quality assurance feedback. Assist the director with quality assurance reviews. Education & Experience: Bachelor’s degree in Architectural or Mechanical Engineering from an ABET-accredited program. 6+ years of experience in the engineering field with a strong understanding of plumbing systems; medical gas experience preferred. Experience designing systems for healthcare, higher education, or commercial buildings. Knowledge of current plumbing and energy codes. Project management experience is a plus but not required. Certifications & Licenses: Fundamentals of Engineering (FE) exam required. Professional Engineering (PE) license preferred, but not required. Valid driver’s license with the ability to use an insured personal vehicle for work-related travel. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionIf you want to work for a reputable Engineering Firm with an amazing company culture (work/life balance) and a path for growth then apply now! This Jobot Job is hosted by: Jennifer Thomas Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $80,000 - $120,000 per year A bit about us: We are a 20+ years strong Engineering Firm offering mechanical and electrical design services for the building and construction industry. Our company consists of designing projects for various building industries that include commercial, tenant finish, healthcare, mission critical, industrial and educational, corporate and governmental facilities. Mechanical design services include HVAC, building automation, temperature control, hydronics, plumbing, indoor air quality control and humidification control, central energy plant design and energy performance design. Electrical design services include lighting, power distribution, communications, emergency and standby power systems, grounding, exterior and site lighting and fire/life safety systems. We have a family first, fun company culture and a very supportive environment. Why join us? Competitive Base Salary and Bonus Structure (2 times/year). 100% Health Insurance, Dental and Disability coverage for the employee and partial coverage for dependents. 401K retirement account and profit sharing. Paid time off and give back community day. Life Insurance. Company activities and outings. Job Details We are looking for a driven Electrical Engineer / Project Manager to join our team in Kansas City, KS! Primary Responsibilities: • Design Electrical Power, Lighting and Life Safety Systems for a variety of project types., • Perform lighting photometric calculations., • Sizing of electrical gear and emergency generators., • Manage the entire MEP team so ensure schedules and work assignments are met for successful project completion., • Check design deliverables in accordance with industry codes and standards, contract requirements, and company standards., • Interact and coordinate with the design and construction project team., • Write and edit projects specifications., • Review project submittals, respond to project RFI’s during construction administration phase of project. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionLead Mechanical Engineer PE (Group Manager) - MEP Consulting This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $125,000 - $155,000 per year A bit about us: We are a multi-disciplined engineering firm with multiple offices. We specialize in MEP Engineering, Sustainable Design, and Commissioning Services. Our projects include Commercial Buildings, Government, Educational, Healthcare facilities and more. We prioritize work/life balance and maintain a positive company culture. As an employee-owned firm, we believe that putting our employees first helps us provide excellent service to our clients. Why join us? • Competitive Salary & Bonuses!, • Full Benefits Package!, • Flexible Work Schedules!, • Meaningful Work!, • Accelerated Career Growth! Job Details Sr Mechanical Engineer P.E. (Group Manager) - Kansas City, MO We are seeking a Sr Mechanical Engineer P.E. to join our innovative team. This is a full-time, permanent position offering a competitive compensation package and the opportunity to work in a fast-paced, high-tech environment. Qualifications: • Bachelor’s degree in Mechanical Engineering or a related field., • Must hold a Professional Engineer license (P.E.), • 8-10 years of experience delivering Projects for clients including Commercial, Healthcare, Mission Critical/Data Centers, Municipal & Federal, Transportation/Infrastructure, Education, Hospitality, etc., • Proficiency in 2D or 3D engineering design and manufacturing tools, such as AutoCAD, ProE, or other., • Strong knowledge of metal fabrication processes., • Understanding of the mechanical properties of materials., • Ability to run simulations and analyze test data., • Ability to write clear and comprehensive technical documentation., • Highly proficient in Microsoft Office., • Excellent decision-making skills and a highly analytical mind., • Proven ability to manage multiple projects while maintaining strict attention to detail., • Ability to communicate complex ideas in a clear manner., • Excellent leadership and team management skills., • Strong problem-solving skills and a creative approach for new ideas., • Excellent verbal and written communication skills., • Must be a self-starter with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines., • Mechanical Systems Design, Engineering, Project Management, • Represent the Firm in Client Meeting; Supervise Projects from Concept through Completion; Serve as the Technical Lead Delegating work and Mentoring Staff; Provide Design Review and QA/QC., • Develop and Test all aspects of mechanical components, equipment, and machinery., • Apply knowledge of engineering principles to design products such as engines, instruments, controls, robots, machines, etc., • Conduct product testing and create models and prototypes., • Oversee the manufacturing process for the machinery., • Perform research to determine the best way to manufacture the products., • Work with the team to manage projects and prepare reports summarizing the project., • Collaborate with multi-disciplinary engineering teams, and work with vendors and contractors., • Perform complex calculations to develop manufacturing, construction, and installation standards and specifications., • Inspect installations and observe operations to ensure compliance with design and equipment specifications, and safety standards., • Use computer-assisted engineering software (AutoCAD) to perform engineering tasks., • Support management in project planning and developing engineering solutions to complex issues. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionTHIS IS NOT A DATA ENGINEERING RELATED POSITION CAI seeks Mechanical Commissioning Engineers, Minimum two years' experience in Data Center Commissioning to support development and execution of all mechanical aspects of commissioning projects. Position Description:This position supports development and execution of all mechanical aspects of assigned commissioning projects from initial engagement, design reviews, checklists, safety support, script development, vendor coordination, testing and report development through turn over to the client. The Mechanical Commissioning Engineer will support the development of the mechanical test schedule, finalize mechanical test procedures, review project submittals for consistency with the design intent, basis of design and the owner’s project requirements, and maintain project cadence for the mechanical systems testing and associated Building Automation Systems. The Mechanical Commissioning Engineer is to support the planning and execution of commissioning for the mechanical infrastructure of the mission critical facility. They will be expected to execute against the project schedule through the coordination of contractors and/or vendors to complete the desired mechanical systems testing. CAI DC Mechanical Commissioning Engineer will be exposed to cutting edge technologies in the Hyperscale and other spaces. You will have an opportunity to work with recognized subject matter experts allowing YOU to be a key player in bringing data technologies to market. As part of our company culture, we invest in YOUR future, and commit to hands on certifications as well as professional training. Our collaborative culture ensures that our customers benefit from exemplary work across our entire range of professional services. Responsibilities:Support and contribute to all aspects of safety for all mechanical tests.Support complete commissioning and performance acceptance testing of the mechanical infrastructure systems.Development of all mechanical test procedures, MOPS, SOO’s and checklists.QA/QC of all mechanical test procedures.Provide input and insight to the overall commissioning plan.Develop reports for the mechanical testing and contribute to a daily report to the Commissioning Project Manager.Attend and be an active participant of customer equipment Factory Witness TestAssist with vendor coordination and management.Perform equipment inspection to ensure build adherence to vendor submittal.Provide test documentation that equipment is delivered, installed, and tested correctly and set to function properly for the customer.Support and perform design specification review, manufacturer submittals, one line drawing sets, and project schedule documentation.QA/QC of mechanical equipment installation\startupExecute test scripts to confirm equipment and system operation to design specification.Ensure safe work practices are followed by the commissioning team and customer site.Engage with customers and vendors to ensure positive experience, goals achievement, and schedule adherence.Provide daily status reports for mechanical commissioning team status.Conduct facility walk downs, turnover, and punch list reviews.General understanding of LEED specifications and requirements.Look for new opportunities for CAI to provide service and value to customer.Duties may be increased as experience and skill allow. Requirements include:Position Requirements: Bachelor’s degree or equivalent experienceMinimum of 2 years Data Center Commissioning experience.Knowledge of OSHA safety requirements.Good written and verbal communication skills.Ability to read and interpret mechanical drawings, P&ID’s and specifications.Knowledge of mission critical design concepts.Knowledge of various Building Automation/Monitoring Systems (BAS/BMS), Air Handlers, Humidifiers, Variable Refrigerant Flow, Computer Room Air Conditioners/Handlers (CRAC/CRAH), Evaporators, Adiabatic Coolers, Pressure/Temperature/Humidity sensors & Flowmeters.Knowledge of basic thermodynamics and heat transfer and fluid flow.Knowledge of the Test, Adjust and Balance (TAB) process.Knowledge of mechanical trend analysis. Strong experience with Word, Excel and PowerPoint. Can effectively create final products in all three programs.Work under construction site conditions Other Requirements: Excellent oral and written English is requiredExtensive travel may be required (75%)Candidates must have a Passport or the ability to immediately get a PassportAble to work in the US without sponsorship now or any time in the future. About CAICAI is a 100% employee-owned company established in 1996, that has grown year over year to more than 800 people worldwide. We provide commissioning, qualification, validation, start-up, project management and consulting services related to operational readiness to FDA regulated and other mission critical industries. Are You Ready?Our approach is simple; we put the client’s interests first, we do not stop until it is right, and we will do whatever it takes to get there.As owners of CAI, we are committed to living our Foundational Principles, both professionally and personally:We act with integrityWe serve each otherWe serve societyWe work for our future With employee ownership, one person’s success is everyone’s success; we work diligently to accomplish team goals. We place Team Before Self, demonstrate Respect for Others, and possess a can-do attitude. That is how we have grown exponentially. BenefitsOur full-time positions offer competitive compensation and benefits which include: up to 15% retirement contribution, 24 days PTO and 5 sick days per year, health insurance at extremely low cost to employee, financial support for both internal and external professional education as well as 70% long term disability paid for by the company.#LI-MV1 #MISSIONCRITICALAverage salary range, not including benefits or compensatory time and possible discretionary bonuses. CAI Benefits:•Comprehensive Health Insurance coverage•24 days of Paid Time Off•ESOP/401K - 15% Company Contribution (US Only)•Company paid Life Insurance•Company paid Long Term DisabilityWe are an equal opportunity employer; we are proud to employ veterans and promote a diverse culture in our workplace. Diversity is a strength for our global company. We pledge that CAI will be operated in a way that is fair and equitable to all – our employees, our customers, and the broader society. This job description is not all inclusive and you may be asked to do other duties. CAI will also consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the FCO. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCompany Description About Smiths Interconnect: Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world’s most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Job Purpose: Performs assembly of all products within the Production area using specialized assembly machines. Responsibilities: • Knowledge of established SPC processes for the product being produced, • Interprets and performs functions per product process plans and complex engineering prints, • Performs a wide variety of assembly/support on electronic, electro-mechanical, mechanical or measurement systems., • Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, cable harnessing, welding and fitting on assembly units., • Test and production machine setups performed while adhering to tolerancing stated in component/assembly drawings., • Be able to demonstrate above average manual dexterity and the ability to work with very small parts, • Testing/R&D of Company and competitor’s products and components, • Separates non-conforming product from conforming product., • Knowledge of quality system documentation and the interrelation of the complete quality system., • Meets the required rate of production, over 80%, for the product being produced., • May be responsible for closing jobs and pulling production schedule for the team, • Requisitions and communicates maintenance needs for special set-up and complicated machine adjustments., • Compliance and participation in all Smiths Connectors EHS programs, policies, procedures and training requirements.Qualifications Technical Knowledge, Skills and Abilities: • Must have basic math skills, • Ability to interpret and perform assembly functions, • Ability to follow detailed written or verbal instructions, • above average manual dexterity and the ability to work with very small parts, • Ability to work with others, • Must have good eye/hand coordination, • Maintain work schedules that will meet customer requirements., • Adapt to daily changes in production and meet shipping schedules. Security: Please State if US Citizen or permanent Resident Required Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionJob Description It's not just about your career or job title...It's about who you are and the impact you will make on the world. Because whether it's for each other or our customers, we put People First. When our people come together, Expand the Possible and continuously look for ways to improve what we create and how we do it. If you are constantly striving to grow, you're in good company. We are revolutionizing the way the world moves for future generations, and we want someone who is ready to move with us. Who will you be working with: Your primary interactions will include fellow Electronics Technicians, line leaders, supervisors, quality assurance specialists, and engineering support teams. You'll collaborate in a technical, fast-paced environment that values teamwork, precision, and continuous learning. Your work will involve direct engagement with production line team members, maintenance specialists, and cross-functional colleagues who share a commitment to maintaining high standards of electronic equipment testing and repair, such as quality and safety. The team emphasizes mutual support, knowledge sharing, and a collaborative approach to solving complex technical challenges in locomotive electronics. How will you make a difference? Our Electronics Technicians are responsible for testing and inspecting precision electronical and mechanical devices, documenting and reporting tests results and troubleshooting issues. This role focuses on working with locomotive electronics equipment, including cab control, signaling equipment, bench level test equipment and board-level troubleshooting. For this position we offer two possible schedules: • Monday – Thursday: 5:00 a.m. – 3:30 p.m. Location: 4800 Deramus Ave, Kansas City, MO 64120 What do we want to know about you: Minimum Qualifications and requirements: (To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.) * Preferred: Associate’s degree in electronic technology, or Equivalent military certification or work experience in electronics repair. * Preferred: +3 years of experience as a bench technician, troubleshooting and repairing electronic assemblies to the component level. * Knowledge of common test equipment i.e., oscilloscopes, multi-meters, signal/function generators, frequency counters, ESS chamber, etc. * Ability to read, understand and analyze schematic drawings. * Ability to follow written and verbal instructions, test procedures, engineering and graphic work instructions, and technical documentations – accurately and consistently in English. * Experience in stand-alone testing of electronic boards. Knowledge, Skills and Abilities: * Experience in electronics new manufacturing/remanufacturing work environments. * Familiarity IPC, recent IPC training, and ESD requirements. * Skilled board level testing, troubleshooting and use of stand-alone internal equipment. * Background in electronics production or prior military electronics experience. * Familiarity with Microsoft OS, HyperTerminal, Pro-comm, or Tera Term software for testing. * Ability to work in a fast-paced environment * Ability to receive, implement feedback and adapt process, procedural or behavioral changes as needed. What will your typical day look like? * Perform functional tests on products at the sub-assembly and final assembly level. * Troubleshoot and repair failed products or subassemblies to the board level. * Identify root cases and apply preventative measures while fixing the product. * Follow the ESD (Electric Static Discharge) and IPC (Institute for printed circuits), processes and procedures to performed board level re-work of component exchange. * Conduct test based on written procedures, verify current revision levels, and visually inspect product for appearance and workmanship prior to the final approval. * Repair and replace electronic components, using through-hole, SMT component repairment, hot air or traditional soldering methods. * Locate and interpret product documentation, including schematic drawings. * Meet quality standards in line with internal quality assurance requirements, AAR and FRA protocols. * Complete daily work orders/schedule based on productivity levels assigned by supervisors and line leads. * Adapt to changing priorities based on customer demands. * Maintain and calibrate test equipment as needed in a timely manner. * Monitor and manage chemical shelf life. * Willing to cross-train and support other team members as needed * Follow all safety protocols and PPE requirements. * Keep the work area clean and organized on a daily basis. * Follow 5S protocol * Perform other duties as assigned. What about the physical demands of the job: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) • Regularly required to talk and hear., • This position requires the ability to perform detailed, precise hand movements using fine motor skills., • to perform precise tasks., • Employee is required to lift and/or move up to 50 pounds on regular basis., • Required to see and distinguish small level components, • The employee will generally work in a temperature-controlled production environment, with frequent exposure to office and electronic testing equipment, as well as other environmental factors. Our job titles may span more than one career level. The salary rate for this role is currently $26.00/hr. The actual salary offered to a candidate may be influenced by a variety of factors, such as: training, transferable skills, work experience, education, business needs, market demands and work location. The base pay range is subject to change and may be modified in the future. More information on offered benefits, which include health, welfare, and retirement, are available at mywabtecbenefits.com. Other benefit offerings for this role may include annual bonus, if eligible. Who are we? Wabtec is a leading global provider of equipment, systems, digital solutions, and value-added services for freight and transit rail as well as the mining, marine, and industrial markets. Drawing on nearly four centuries of collective experience across Wabtec, GE Transportation, and Faiveley Transport, the company has grown to become One Wabtec, with unmatched digital expertise, technological innovation, and world-class manufacturing and services, enabling the digital-rail-and-transit ecosystems. Wabtec is focused on performance that drives progress and unlocks our customers' potential by delivering innovative and lasting transportation solutions that move and improve the world. We are lifelong learners obsessed with making things better to drive exceptional results. Wabtec has approximately 27K employees in facilities throughout the world. Visit our website to learn more! Our Commitment to Embrace Diversity: Wabtec is a global company that invests not just in our products but also our people by embracing diversity and inclusion. We care about our relationship with our employees and take pride in celebrating the variety of experiences, expertise, and backgrounds that bring us together. At Wabtec, we aspire to create a place where we all belong and where diversity is welcomed and appreciated. To fulfill that commitment, we rely on a culture of leadership, diversity, and inclusion. We aim to employ the world's brightest minds to help us create limitless source of ideas and opportunities. We have created a space where everyone is given the opportunity to contribute based on their individual experiences and perspectives and recognize that these differences and diverse perspectives make us better. We believe in hiring talented people of varied backgrounds, experiences, and styles...People like you! Wabtec Additional Information Our job titles may span more than one career level. The salary rate for this role is currently $0-0 The actual salary offered to a candidate may be influenced by a variety of factors, such as: training, transferable skills, work experience, education, business needs, market demands and work location. The base pay range is subject to change and may be modified in the future. More information on offered benefits, which include health, welfare, and retirement, are available at mywabtecbenefits.com. Other benefit offerings for this role may include annual bonus, if eligible. What could you accomplish in a place that puts People First? At Wabtec, it’s not just about a job - it’s about the impact you make. When our people come together, we’re Expanding the Possible by continuously improving what we do and how we do it - for our clients and each other. If you’re ready to revolutionize how the world moves for future generations, Wabtec is the place for you. Who are we? Wabtec is a leading global provider of equipment, systems, digital solutions, and value-added services for the freight and transit rail sectors. Drawing on more than 150 years of experience, we are leading the way in safety, efficiency, reliability, innovation, and productivity. Whether it’s freight, transit, ports, logistics, mining, industrial, or marine, our expertise, technologies, and people together – are accelerating the future of transportation. With roots that date back to George Westinghouse, Thomas Edison, and Louis Faiveley, Wabtec has always built technologies and implemented solutions for a variety of sectors that are critical to meeting the needs of customers and governments alike. Our global team of about 30,000 employees worldwide delivers performance that moves the world forward. We’re lifelong learners, obsessed with better. Learn more at . Culture powers us and the possibilities. We believe the best ideas come from a mix of experiences and backgrounds. At Wabtec, we strive every day to create a place where everyone belongs. We’re building a culture where leadership, inclusion and your unique perspective fuel progress. We’re proud to be an Equal Opportunity Employer. We welcome talent of all backgrounds, experiences, and identities, including race, gender, age, disability, veteran status and more. Need accommodation? Just let us know - we’ve got you.

Job Description Company Background: Since our founding in 1883, UltraSource has served the processing and packaging equipment needs of thousands of companies worldwide in the meat and poultry, seafood, produce and dairy industries. Our comprehensive offering includes hundreds of products that enable us to custom tailor equipment solutions that meet the production line objectives, labor goals, budget constraints and brand image of our customers. UltraSource's quality program ensures our products are engineered and produced to meet or exceed our customers' requirements. Reliability, maintainability, and safety are at the forefront of our engineering strategy and support to our dedication to quality. Mon-Fri 8AM-5PM Duties and Responsibilities: • Ascertains equipment model and type of part needed, inspects worn, damaged, or defective part to determine replacement required, or advises customer of part needed according to description of malfunction., • Discusses use and features of various parts., • Create contacts, prepare quotations, enter orders, and log interactions in the CRM system., • Communicate inventory needs to the Purchasing department to anticipated customer needs and minimize stockouts., • Associate or bachelor's degree preferred; engineering degree a plus., • Minimum two (2) years related experience in customer service or sales; general parts sales experience (regardless of industry) is a preferred., • Excellent customer service and interpersonal skills; responds promptly to customer needs., • Experience in a technical setting or knowledge of food packaging and supplies preferred but not required., • Ability to identify and resolves problems, works well in group problem solving situations. While performing the duties of this job, the employee is required to sit, talk, listen and frequently use hands to finger, handle, type, and feel. Required to occasionally stand and travel both domestically and abroad to visit work and customer sites. Be able to occasionally lift and/or move up to 25 pounds. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of this position. Work Environment: In addition to a typical office environment, the employee must also frequent the company's warehouse and customer locations with moderate exposure to heat, cold, humidity, dust, noise, and working equipment (electrical and mechanical hazards).

Job Description EAM-Mosca Corp., Hazle Township PA, a dynamic market leader in the area of end-of-line automated packaging machinery and consumable strapping solutions, is seeking a Field Service Technician for the Kansas City, KS region. EAM-Mosca is privately held and retains a unique, focused, entrepreneurial culture. EAM-Mosca also enjoys a blue-chip client base of highly successful North and South American manufacturing companies and has a portfolio of products applicable to a variety of end-use markets. The key to the ongoing success of the business is a system-based product portfolio featuring standard as well as custom engineered packaging machinery solutions and a superior consumable packaging product, complimented by quality technical service and readily available aftersales parts support. EAM Mosca is seeking experienced self-driven, Field Service Technicians with electromechanical background to support our advanced strapping systems. The Field Service Technician provides on-site and remote support for a suite of strapping solutions both stand alone, and automated machines integrated into our customers conveyance systems. The Field service techs responsibilities include: · Install, Commission, equipment in a manner that ensures reliability and high customer satisfaction. · Perform preventative maintenance, Predictive Maintenance, Emergency repair on all EAM equipment. · Troubleshoot mechanical and electrical systems utilizing systematic thinking while employing test equipment and hand tools to discover faults and develop plans to report, plan and execute the planned solution. · Ability to work closely with Mosca Engineering to provide the highest level of customer service. · Generate service reports that explain the work provided, parts provided and clear understanding of the issue, the solution, and any follow up needed. All done in a timely and professional manner. · Communicate daily with the area service managers and develop schedules and travel itineraries that meet the needs of our customers and provide ample time to preform the work requested. · Work with a sense of urgency but remain calm under pressure to ensure the highest level of customer service. Skills Required: · Advance understanding of machines and their systems to include but not limited to pneumatic, hydraulic, bearings, levers, channels, pulleys, cams, and camshafts · Basic experience with Control systems utilizing Allen Bradley, Siemens and B&R PLC’s · Electromechanical experience with conveyance systems, understanding sensors, electric motors and how they interact. · Able to use a multimeter, perform point to point, read electrical schematics and trace · Able to use and read Calipers micrometers. · Able to take initiative and work independently on a regular basis · Able to communicate clearly and professionally through both written and verbal medias: Web based service reporting, Video conferencing and face to face interactions. · Able to travel extensively within the U.S. Monday thru Friday. (80%) Team, Training and Support: · In-house training with continuous on the job field training with senior field staff · Company car · Corporate expense account / credit card · Company laptop and cell phone · All required Personal Safety Equipment · Company logoed clothing · All supporting parts inventory needed for equipment maintenance · Company supplied tools Experience and education: · Minimum 3 years of field or plant equipment maintenance experience. · Corrugated Industry experience a plus · Mechanical understanding of strapping machines, Mosca preferred · High school diploma · A valid driver's license · Solid Mechanical / Electrical background · PLC experience preferred · Associates Degree a plus Excellent Pay and Benefits package: · Medical, Dental and Vision benefits · 401(k) retirement savings program · Paid vacation and holidays · Life Insurance · Employee assistance programs All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Powered by JazzHR PFJBH7nAW2

Job Description Job Title: Mechanical Assemblers PAY: Starts out at $21/hour, WILL INCREASE TO $28/HOUR AFTER 1 YEAR. Shift: 1st shift 6AM-4:30PM Monday-Thursday (up to 8 hours of overtime.) Job Description We are seeking a skilled Assembler to join our team in assembling stainless steel laboratory equipment. This position requires the ability to perform full-cycle assembly and testing independently, utilizing hand tools, and reading blueprints and schematics. Responsibilities • Assemble stainless steel lab equipment using hand tools., • Perform full-cycle assembly and testing independently., • Read and interpret blueprints and schematics daily., • Troubleshoot and repair equipment with some assistance., • Proficiency in reading and interpreting engineering drawings, wiring schematics, and work instructions., • Ability to lift between 50 to 75 lbs., • 2 years of recent assembly experience or related experience., • High school diploma required., • Previous industrial assembly experience is advantageous. Join a dynamic team where your skills in assembly are valued and cultivated. Enjoy a clean and supportive work environment with opportunities for growth and a competitive pay structure. Our facility fosters a collaborative atmosphere and offers a unionized workplace ensuring fair practices. Work Environment The work environment is a clean, sheet metal setting with a requirement for steel-toed boots, jeans, and a t-shirt. The department consists of about 10 people, providing a close-knit team atmosphere. The facility is not temperature controlled and spans over 160,000 sq ft. Work hours are Monday through Thursday, from 6 am to 4:30 pm, with potential overtime starting at 5 am. After 1 year of tenure the position goes to $28/hr! Job Type & Location This is a Permanent position based out of Kansas City, MO. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Kansas City,MO. Application Deadline This position is anticipated to close on Jan 20, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionGeotechnical/Environmental Driller (Experienced) Location: Tulsa, OK (preferred) or your market within TX/AR/MO/KS/CO/NM* Job Type: Full-Time Pay: $65,000 – $100,000 per year (DOE) + Quarterly Bonuses Expected Hours: 40–50 per week *For the right applicant, AIMRIGHT will consider basing a company drill rig in your market with a local Laydown Yard. Relocation to Tulsa is also available. Why AIMRIGHT AIMRIGHT Testing & Engineering is expanding. We specialize in projects across Texas, Arkansas, Missouri, Kansas, Colorado, and New Mexico, and from time to time take on select projects outside this area. We operate five well-maintained drill rigs and reward productivity with quarterly bonuses tied to rig performance. Join a values-driven team that prioritizes safety, precision, and teamwork. What You’ll Do * Perform geotechnical/environmental subsurface exploration and sampling (auger, mud rotary, rock drilling/coring). * Install standpipes, piezometers, monitoring wells, and related instrumentation. * Safely transport, set up, and operate drill rigs per plans, specs, and safety protocols. * Read/interpret project plans for site coordination and location accuracy. * Complete accurate sampling logs and field documentation. * Perform basic mechanical troubleshooting and routine maintenance. * Communicate professionally with project teams, site personnel, and clients. What It Takes * Experience: 1+ year in geotechnical/environmental drilling. * License: CDL Class A with a clean MVR (required or obtainable in short order). * Travel: Regional travel typical within TX/AR/MO/KS/CO/NM, with occasional out-of-region assignments as needed (overnights ~1–2 weeks bi-monthly or as projects require). * Physical: Lift 100 lbs., stand for extended periods, work in all weather. * Skills: Mechanical aptitude, strong safety mindset, clear verbal communication. Compensation & Benefits * Salary: $65,000 – $100,000 DOE * Bonuses: Quarterly, based on rig productivity * Benefits: 401(k), medical, dental, vision * Equipment: Five company-maintained rigs; strong logistics and safety support * Growth: Long-term career path in a stable, growing company Location & Mobility Options * Primary hub: Tulsa, OK (relocation support available). * Alternate base: For the right candidate, we will evaluate placing a company rig in your market with a local Laydown Yard, supported by AIMRIGHT logistics and safety systems. * Where we work: Core markets are Texas, Arkansas, Missouri, Kansas, Colorado, and New Mexico; we occasionally accept projects outside this area. Schedule * Monday–Friday; occasional nights/weekends as project needs dictate. * Overnight travel required (typically 1–2 weeks bi-monthly or as needed). Join AIMRIGHT and advance your drilling career with a company that C.A.R.E.S. about quality, safety, and growth. Apply today and become part of a high-performing team.

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description The Superintendent III is responsible for directly managing a project’s construction activities to meet specifications, delivering the project within budgeted cost and by the scheduled completion date. The types of projects managed are complex to highly complex. This position is required to coordinate, plan, and supervise craft superintendents, contractors and/or craft activates on projects. This person should be able to oversee discipline specific scopes of work from $2MM - $10MM with little guidance from senior level field leadership. Candidates must be willing to travel extensively. Current project locations include Wisconsin, Tennessee, Kansas, Pennsylvania, and California, among others Responsibilities • Directly manage a project’s construction activities to meet specifications, delivering the project within budgeted cost and by the scheduled completion date, • Manage complex to highly complex projects, • Coordinate, plan, and supervise craft superintendents, contractors and/or craft activates on projects, • Oversee discipline specific scopes of work from $2MM - $10MM with little guidance from senior level field leadership.Qualifications, • Bachelor’s degree in Construction Management, Science, or Engineering or equivalent job experience required, • Team-oriented individual capable of managing others, • Demonstrated success in managing the construction scope on mid to large sized projects, • Design/Build experience a plus, • Ability to fully understand project specifications and identify deviations in the field, • Superior planning ability, specifically in regard to Lean Tools for schedule, constructability, sequencing, etc., • Demonstrated computer skills with Microsoft Office suite, an iPad or handheld device., • Demonstrated capability with computer programs for project management and reporting. Experience with PlanGrid highly desired., • Experience with mobile devices and VDC apps a plus, • Discipline Specific Expertise (Mechanical, Electrical, Piping/Plumbing) #LI-JV1 Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job DescriptionLightEdge Solutions is developing the IT solutions that will propel businesses forward over the next 10 years. Using a combination of shared and private/dedicated platforms, LightEdge has been successful in offering businesses alternatives that streamline operations, improve reliability and reduce costs.If you are passionate about creating real solutions that help businesses with cutting-edge technology, want to be challenged to think out of the box and be in a position where you can impact change on a daily basis, then LightEdge can offer you a dynamic corporate environment built on teamwork and personal responsibility. The Senior Vice President of Development will serve as a key member of the executive leadership team, reporting to the CEO, and lead the end-to-end development of data center facilities to support Lightedge’s growth objectives. This role oversees site acquisition, power procurement, design, engineering, and construction. The SVP of Development will be responsible for building a scalable, replicable, and cost-efficient development platform that meets customer demand, accelerates time-to-market, and delivers attractive returns on capital.Key Responsibilities: * Strategic Planning & Execution • Develop and lead Lightedge’s long-term development strategy across site acquisition, power procurement, design, engineering, and construction., • Drive alignment between infrastructure investments, commercial strategy, and technological trends in the data center sector to enable rapid market entry and capacity scaling., • Partner with Sales, Finance, and Operations to prioritize development initiatives based on ROI, customer demand, and power availability., • Report regularly to the CEO and Board of Directors on development progress, key risks, and strategic initiatives.Design, Engineering, and Construction, • Direct in-house and/or third-party design, engineering, and construction teams to deliver projects on time and within budget., • Establish scalable design and construction standards to support consistent delivery across data centers of different sizes., • Ensure all developments adhere to internal standards for quality, sustainability, compliance, and safety.Power Procurement, • Develop and execute strategies for securing reliable and cost-effective grid-connected power to support growing data center portfolio, structuring creative energy solutions where necessary., • Negotiate and manage contracts with utilities for services, infrastructure, and grid interconnection. Advocate for favorable regulations for large energy users.Team Development & Leadership, • Build and lead a high-performing, cross-functional team of real estate, power, design, engineering, and construction professionals and external contractors., • Foster a culture of accountability, innovation, and continuous improvement.CapitalPlanning&VendorManagement, • Partner with Finance to build and manage capital budgets., • Lead strategic vendor partnerships and negotiation of commercial terms.RiskManagement&Governance, • Ensure appropriate risk management frameworks are in place for development activities, including regulatory, environmental, and financial risks., • Partner with Legal to ensure governance across all jurisdictions and project types.Site Acquisition & Real Estate Development, • Partner with strategic finance for end-to-end site acquisition process, including market analysis, feasibility studies, land procurement, entitlements, and incentives., • Build and maintain relationships with brokers, municipalities, and developers.Required Qualifications:, • 10+ years of experience in data center development, construction, or infrastructure delivery., • Proven track record of delivering data center development projects across the U.S.,with scale exceeding $100M per project., • Deep understanding of electrical and mechanical systems, utility interconnects, permitting processes, and Tier III operational standards., • Demonstrated experience in capital planning, vendor negotiations, and managing development budgets exceeding $100M annually., • Strong knowledge of entitlements, incentive negotiations, environmental compliance, and land development lifecycle.Technical Requirements: Data Center Design • Deep understanding of Tier III data center design principles, with fluency in Uptime Institute standards and redundancy configurations (N, N+1, 2N, etc.)., • Proficiency in mechanical, electrical, and plumbing (MEP) systems including:o UPS systems, switch gear, PDUs, generators, BMS/EPMSo HVAC systems including CRAC/CRAH units, chilled water systems, and direct-to-chip cooling for HPC/AI, • Experience implementing modular and prefabricated design solutions to enable speed-to-market and scalability.Power and Cooling, • Advanced knowledge of utility infrastructure planning, including transmission and distribution design, substation integration, and dual-feed resiliency., • Familiarity with energy service agreements (ESAs), power purchase agreements (PPAs), and utility interconnects., • Understanding of thermal management strategies, such as free cooling, liquid cooling, and containment design for high-density deployments., • Understanding of efficiency metrics like PUE, WUE, and their optimization through design and operations.Real Estate and Site Acquisition, • Expertise with land due diligence, zoning, entitlements, environmental site assessments (Phase I/II), and local regulatory processes., • Experience securing and managing development incentives (e.g., tax abatements, infrastructure grants, energy rebates) and managing public/private utility negotiations., • Proficiency with GIS and power availability mapping tools to identify viable land in target markets.Construction & Project Delivery, • Familiarity with construction delivery models including design-bid-build, design-build, and CM at-risk., • Proficiency in project management tools, managing construction schedules, Gantt charts, milestone tracking, and earned value reporting., • Deep experience with construction budgeting, cost estimating (ROM to GMP), and value engineering.Engineering & Technical Standards, • Understanding of:o NFPA, NEC, ASHRAE, IEEE, ISO/IEC27001, and other relevant regulatory codes and industry best practiceso Fire suppression systems (pre-action, clean agent), leak detection, and other safety-related infrastructure, • Familiarity with commissioning standards (Level1–5) and integrated systems testing (IST).Regulatory & Compliance, • In-depth knowledge of building codes, safety regulations, and permitting across U.S. jurisdictions., • Experience working with environmental agencies, local utility commissions, and permitting authorities to meet development timelines.Tools & Reporting Systems

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description At CRB, we design and build facilities that power life-saving medicines and innovative food solutions. As a Superintendent IV, you’ll lead complex construction projects that make a real difference. This is your opportunity to work with cutting-edge teams, manage high-value projects, and shape the future of life sciences and food & beverage industries—all while growing your leadership skills in a collaborative, forward-thinking environment. The Superintendent IV is responsible for managing all on-site construction activities to ensure projects are delivered on time, within budget, and to the highest quality standards. This role oversees complex to highly complex projects, coordinating multiple disciplines and scopes of work ranging from $20MM to $50MM. You’ll lead craft superintendents, contractors, and field teams, driving safety, efficiency, and excellence with minimal oversight from senior leadership. This is a travel-based position. Relocation is not required, but frequent travel to project sites is essential. Key Responsibilities • Direct and manage on-site construction activities to meet project specifications, schedule, and budget., • Oversee multiple discipline superintendents and scopes of work on large-scale projects ($20MM–$50MM)., • Coordinate and supervise craft superintendents, contractors, and field activities., • Ensure compliance with safety standards, quality requirements, and project specifications., • Apply Lean tools for planning, scheduling, constructability, and sequencing., • Identify and resolve field deviations from project specifications., • Collaborate with project management and engineering teams to maintain alignment on goals and deliverables., • Mentor and lead team members to foster growth and accountability.Qualifications Minimum Qualifications • Bachelor’s degree in Construction Management, Engineering, or related field OR equivalent experience., • 15+ years of construction experience, including leadership roles on mid- to large-scale projects., • Strong understanding of project specifications and ability to identify deviations in the field., • Proficiency with Microsoft Office Suite and mobile technology (iPad or handheld devices)., • Design/Build project experience., • Familiarity with Lean construction tools and methodologies., • Experience with project management software (PlanGrid highly desired)., • Knowledge of VDC applications and mobile construction technology., • Discipline-specific expertise in Mechanical, Electrical, Piping/Plumbing, Automation, or I&C., • Proven ability to lead and mentor teams effectively. #LI-JV1 Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.