Trabajos mechanical engineering en Houston, Texas - Page 16Crear alertas

Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: • Community “We care for our communities”, • Integrity “We act with integrity”, • Passion “We infuse passion into everything we do”, • Quality “We believe quality comes from a culture of innovation and continuous improvement”, • Inform Environmental Compliance Inspectors and/or other members of the Environmental Compliance Team of observations, violations, activities, etc., • Contact supervisor for priorities and deadlines in the field., • Resolve differences in the interpretation of plans and specifications., • Ensure the safe utilization, storage and maintenance of all documents and tools., • Update Direct Report on progress and delays on every task or assignment., • Ensure safe usage and maintenance of individually assigned company vehicle and field equipment., • Meet established project deadlines., • Carry out assigned duties in accordance with established procedures., • Prepare and submit accurate, legible, comprehensive and complete inspection reports on a daily basis in accordance with established quality procedures., • Review plans, specifications, and shop/working drawings for project activities., • Meet with contractor's supervisors or other project leaders on assigned project sites to discuss and coordinate environmental compliance activities, corrections to existing controls, and implementation of additional controls., • Prepare reports on findings to ensure compliance with applicable state and federal environmental laws, rules, regulations, and policies., • Evaluate environmental impact of construction activities including water quality/wetland/hazardous material geological, cultural or historic resources., • Keep abreast of current environmental developments to include laws, regulations, policies and procedures., • Responsible for maintenance and update of water quality records such as Storm Water Pollution Prevention Plans., • Monitor and evaluate the effectiveness of environmental controls., • High School Diploma or G.E.D. preferred but not required., • Environmental laws, regulations, and mitigation requirements., • Commercial construction, plans, construction inspection procedures, and specifications, • Reading and interpreting specifications. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. May be regularly required to stand, walk, and drive vehicle short and/or long distances. Occasionally required to climb or balance, stoop, kneel, crouch, or crawl. Frequently required to talk or hear. Occasionally required to lift and/or move up to, 50 pounds. Specific vision abilities required by this job include close vision, distant, color peripheral vision, depth vision, and ability to adjust focus. May be occasionally exposed to work near moving mechanical parts, fumes or airborne particles and frequently exposed to outdoor weather conditions. Noise level for this position is loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. Work responsibilities may require out of town travel to Raba Kistner offices, client offices and project locations. EOE/Disabled/Veteran Drug Free Workplace #LI-ONSITE

BS Degree in Aerospace Engineering (Mechanical or Electrical Engineering Degree may be considered depending on experience). JOB DESCRIPTION: Aerospace Systems Safety Engineer III. Perform System Safety Engineering assessments and analyses of Space Station Systems and Payload flown on Soyuz, Progre

Job Description Project Manager Position Pay: $65,000.00 - $85,000.00 per year ESSENTIAL DUTIES AND RESPONSIBILITIES: The project manager is responsible for managing projects to ensure project goals are met. • Determine and define project scope and objectives, • Predict resources needed to reach objectives and manage resources in an effective and efficient manner, • Prepare a budget based on the scope of work and resource requirements, • Track project costs to meet budget, • Develop and manage a detailed project schedule and work plan, • Provide project updates on a consistent basis to various stakeholders about strategy, adjustments, and progress, • Manage contracts with vendors and suppliers by assigning tasks and communicating expected deliverables, • Utilize industry best practices, techniques, and standards throughout the entire project execution, • Monitor progress and adjust as needed, • Measure project performance to identify areas for improvement, • Other duties may be assigned ADDITIONAL ESSENTIAL FUNCTIONS: • Ability to work independently with minimal or no supervision, • Ability to communicate effectively with clients and coworkers, • Ability to communicate with the electronic engineers' team, • Ability to accept direction and constructive criticism, • Ability to complete tasks in a timely manner, • Ability to effectively multitask and manage multiple projects, • Ability to maintain consistent attendance and punctuality EDUCATION & EXPERIENCE • BS Degree in Electrical or Mechanical Engineering or Engineering Technology required with 1 to 5 years of relevant experience, • Project Management Professional (PMP) certification preferred, • Proven ability to solve problems creatively, • Strong familiarity with project management software tools (Microsoft Project), methodologies, and best practices, • Experience seeing projects through the full life cycle, • Strong interpersonal skills and extremely resourceful, • Proven ability to complete projects according to outlined scope, budget, and timeline, • Experience working with customers, sales, and engineering teams, • Innovative thinker and problem solver. Willingness to push for better solutions, • Professional English in written and verbal form; professional presentation skills, • Ability to travel 25% of the time PHYSICAL DEMANDS The physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Job Type: Full-time Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Education: • Bachelor's (Required) Experience: • Project management with overseas teams: 1 year (Preferred), • Electronic & automotive design projects managing: 1 year, • Microsoft Project: 1 year (Preferred), • Project leadership: 1 year (Preferred) License/Certification: • US citizenship (Preferred) or authorization to work in the United States. Willingness to travel: • 25% (Preferred) Work Location: Remote Company DescriptionAn Electronic Parts Distribution Company in Automotive Industry.An Electronic Parts Distribution Company in Automotive Industry.

Job Description Who doesn’t love doughnuts, right?! TDP Bakery brings fresh, indulgent bakery products to places where they normally aren’t found—because fresh, never frozen, bakery is simply better. Through our Bake Face™ brand and private-label partnerships, we supply a broad portfolio of Honestly Fresh™ baked goods to retailers nationwide. We are seeking a Corporate Maintenance Manager to oversee maintenance strategy, asset reliability, and capital projects across all TDP Bakery production locations. The Corporate Maintenance Manager is a strategic and hands-on leader responsible for driving enterprise-wide maintenance programs, ensuring equipment reliability, and overseeing capital projects across TDP Bakery’s five production facilities. Based in Chandler, Arizona or Houston, Texas, this role requires a proactive, technically skilled professional who thrives in a fast-paced food manufacturing environment and can lead teams to achieve operational excellence. This role offers the opportunity to shape the maintenance strategy, optimize equipment performance, and directly impact production efficiency, uptime, and overall facility performance. The ideal candidate will combine technical expertise with leadership skills to influence and inspire teams across our nationwide footprint. Why Join TDP Bakery? • Lead enterprise-wide maintenance strategy and reliability programs across multiple high-growth production facilities, • Operate in a collaborative, innovative environment focused on operational excellence and continuous improvement, • Competitive compensation, benefits, and professional growth opportunities, • Lead enterprise-wide preventive, predictive, and corrective maintenance programs to maximize equipment uptime, process stability, and cost effectiveness, • Oversee accurate, consistent CMMS usage and maintenance documentation across all sites, • Provide advanced technical troubleshooting across mechanical, electrical, automation, pneumatic, and hydraulic systems, • Conduct root cause analysis and implement long-term engineering solutions for recurring equipment failures, • Deliver both strategic direction and hands-on technical support when critical issues arise, • Lead capital projects from concept through commissioning, including scope definition, budgeting, vendor selection, installation, and validation, • Ensure capital projects meet schedule, budget, and regulatory requirements, including OSHA, GMP, food safety, and sanitary design standards, • Develop and manage standardized vendor qualification, sourcing, and performance management frameworks, • Lead competitive bidding, contract negotiation, and total cost-of-ownership evaluations for equipment, MRO, and technical services, • Drive supplier consolidation, cost reduction, and strategic sourcing initiatives across the enterprise, • Track and analyze maintenance KPIs including downtime, PM compliance, emergency work, and food safety impact, • Partner closely with General Managers and site Maintenance Leads to align maintenance priorities, production schedules, and reliability goals, • Collaborate with Production, Quality, and Safety to plan maintenance windows with minimal operational impact, • Lead reliability initiatives by partnering with continuous improvement to enhance equipment performance and operational execution, • Contribute to annual budgeting, cost forecasting, and long-term capital planning for all bakery locations, • 7+ years of maintenance experience in food manufacturing or other regulated environments, • 3+ years in a leadership, multi-site, or corporate maintenance role, • Proven ability to lead teams, manage projects, and drive results across multiple sites, • Hands-on technical expertise in mechanical, electrical, pneumatic, hydraulic, and automated systems, • Capital project leadership experience and contractor oversight, • CMMS proficiency and strong troubleshooting skills, • Ability to manage multiple priorities and projects simultaneously, • Bakery or high-speed food production experience, • Familiarity with PLCs and automated production systems, • Experience with Lean, TPM, Six Sigma, or reliability-centered maintenance, • Experience with sanitary builds, equipment installation, or modifications to support food safety and operational compliance, • PMP or other project management certification TDP Bakery is an Equal Opportunity Employer and encourages applications from qualified individuals regardless of race, religion, national origin, sexual orientation, gender, disability, or any other category protected by law.

Job DescriptionTitle: Field Service Engineer Location: Remote (U.S.-based with 75%+ travel) Salary: • $100,000–$110,000 base, • Additional compensation includes daily overtime pay, weekend premium rates, and travel-related earningsHire Type: Direct HireBenefits: Comprehensive benefits package including medical, dental, vision, 401(k) with company match, 5 weeks PTO starting day one, and 11 paid holidays/sick days. .Sterling Engineering is partnering with a leading industrial equipment manufacturer to hire a Field Service Engineer to support their Warranty Department. This role is ideal for someone who enjoys hands-on work in the field and is comfortable working at heights. The position focuses on supporting the performance, maintenance, commissioning, and troubleshooting of large-scale ship-to-shore crane systems across global port operations.Key Responsibilities:, • Support operation, maintenance, and troubleshooting of ship-to-shore crane systems, • Commission AC/DC drive systems, medium voltage VFDs, and PLC-based controls, • Perform system tuning, diagnostics, and performance optimization, • Troubleshoot complex electrical and control system issues in the field, • Support system testing, customer acceptance, and warranty resolution activities, • Train customers on system operation and maintenance best practices, • Provide detailed field reports and collaborate with internal engineering teams, • Travel domestically and internationally (75%+), often with short notice, • Perform work at heights, including up to approximately 175 feetQualifications:, • Experience working with large AC/DC motors, medium voltage VFDs, and PLC programming, • Hands-on field service or commissioning experience in industrial environments, • Strong troubleshooting skills within electrical, automation, and control systems, • Ability and willingness to travel extensively and work at heights

Job DescriptionPurpose of the position The main purpose of this position is leading the introduction (NPI), debugging, and sustaining of complex automated manufacturing system. You will be responsible for the electrical and software stability of production equipment, including Robotics, PLCs, AOI system, and AGVs. You will not only directly troubleshoot controls issue, but also introduce latest technology to minimize downtime and optimize cycle time.Department: FATP_PE Duties and Responsibilities • Analyze the causes of failures: Use professional analysis techniques and tools to conduct a comprehensive and in-depth inspection and analysis of failed products, and determine the root causes of product failures, including design defects, material problems, manufacturing process deviations, environmental factors, etc., • Automatic & Mechanical Equipment Introduction, • Participate early-stage Design for Manufacturability (DFM), equipment evaluation/design/development and DOE verification assembly process., • Push EQ improvement to increase assembly yield and meet customer targets, • Automatic & Mechanical Equipment Installation & Debug, • Push vendor’s equipment setup/installation/debug at NPI. Analyze causes of equipment failures and promote resolution., • Push EQ preventive improvement to reduce downtime & ensure production continuity., • Equipment Maintenance in MP Stage, • Machine trouble shooting and yield improve during maintenance phase. EQ spare parts management (optimal inventory & Risk alert), • Automatic & Mechanical Equipment Assets Management, • Evaluate, establish and sort EQ lists; EQ IQC and EQ storage at WH, equipment inventory and storage management, • Formulate EQ maintenance plans, share maintenance experience and organize technician training Education and work experience • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, or related field., • 3+ years of electrical maintenance experience in manufacturing, background in automotive electronics, semiconductor, or precision assembly industries preferred., • Experience in robotics, AGV, AOI, or related specialized fields is highly preferred. Working conditions This role is primarily based in a fast-paced, high-volume manufacturing facility, requiring daily presence on the production floor to oversee processes, troubleshoot issues, and ensure operational efficiency. May require occasional weekend hours to support production deadlines, emergency repairs, or project implementations. Skills: • Proficient in Mitsubishi/Omron/Siemens PLC programming and commissioning, experience in parameter configuration and troubleshooting of VFDs and servo drives., • Able to read electrical schematics and wiring diagrams; familiar with low-voltage power distribution systems. jVxttVBLjE

Job Description About Stratus Stratus® is an integrated, multi-disciplinary engineering, architecture, interior design, and consulting firm. Consistently ranking among the Top 500 Design Firms in Engineering News-Record, the firm offers a deep bench of industry experts through a highly collaborative approach, delivering innovative solutions across the full project lifecycle. Operating coast to coast, Stratus® serves clients nationwide while maintaining a strategic commitment to supporting high-growth economies and building vibrant communities that foster the professional growth of its team. Serving public- and private-sector clients, the firm is dedicated to delivering the highest-quality service wherever projects take shape. Across the Civic, Commercial, Industrial, Transportation, Education, Water Resources, and Government sectors, we bring precision, insight, and purpose to every project, from targeted renovations to large-scale infrastructure. Stratus® designs spaces, systems, and solutions that perform, endure, and make an impact, delivering on our promise of Better Plans. Better Places. The Role The Market Director – Data Centers is a senior leadership role responsible for driving growth, client relationships, and delivery excellence within Stratus’ data center and mission-critical infrastructure market. This individual operates as a seller-doer, accountable for both revenue generation and successful execution of complex, high-value projects. The Director will lead multi-disciplinary teams across the full project lifecycle - from feasibility studies and design through construction administration and commissioning - while building Stratus’ presence as a trusted partner to hyperscale, colocation, and enterprise clients. Responsibilities • Lead the growth of Stratus’ data center / mission-critical practice, including market strategy, client targeting, and client engagement., • Identify, pursue, and win new business opportunities, lead proposals, interviews, and contract negotiations., • Represent Stratus in industry forums, conferences, and client engagements to build brand presence., • Collaborate with executive leadership to define revenue targets, pipeline strategy, and market positioning., • Provide oversight of data center project and programs., • Drive performance across scope, schedule, budget, and quality on all data center projects., • Establish fee strategies, staffing plans, and utilization targets across projects., • Monitor project financials and intervene to mitigate risk and protect profitability., • Build and lead high-performing data center design and project management teams., • Mentor Project Managers and technical staff to develop next level leaders., • Support recruiting and workforce planning aligned with market growth., • Establish best practices for data center delivery, technical coordination, and client engagement., • Provide leadership in data center design and construction practices, including:, • Electrical distribution systems (MV/LV, redundancy, resiliency), • Mechanical systems (cooling plants, liquid cooling, airflow strategies), • Site infrastructure and utility coordination, • Maintain awareness and develop strategic plans for emerging trends:, • AI / high-density compute, • Energy and sustainability strategies, • Modular and prefabricated, • Onsite generation Qualifications Required • Bachelor’s degree in Engineering, Architecture, or related field, • 10+ years of experience in engineering, construction, or program management, • Proven experience delivering data center or mission-critical projects., • Demonstrated success in client development and business growth., • Experience leading large, multidisciplinary teams and complex programs. Preferred • Experience with hyperscale data center clients and developers, • Professional certifications (PE, PMP, RA, ATD, CxA), • Experience with central plant systems and high-density compute environments. Why you’ll love Stratus • A team-oriented environment that values transparency, creativity, and shared success, • Meaningful career paths, leadership opportunities, and space to specialize, • Learning & Development – Education and Professional Licensing, • We believe flexible, hybrid work supports the balance and well-being our team deserves, • Excellent Health Care Programs – Medical, Dental, and Vision Insurance, • Company-paid Life Insurance, Short-Term Disability, and Long-Term Disability, • Voluntary Life Insurance options for employees, spouses, and dependents, • 401k Retirement Plan with employer match, • Paid Holidays & Competitive PTO plans Interested in learning more about Stratus, please visit . Equal Opportunity Statement Stratus is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, pregnancy-related conditions, and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Stratus Team’s management Team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs, and general treatment during employment.

Job Description Job Title: Sr Director of Process Engineering & Operations Houston Metro Area Travel : Up to 50% Job Type: Full-Time Exempt Compensation: $200-250k Benefits: This position is eligible for medical, dental, vision, 401(k), bonuses & PTO. Our client is seeking and experienced Sr Director of Process Engineering and Operations. This is a highly visible role to senior management with a well established organization. Drive engineering excellence across the multiple locations and process improvements in plants. Responsibilities: Engineering Leadership - maintain standardization of engineering across locations nationally Partner with local leadership to create process improvement and automation Six Sigma adherence Provide technical engineering oversight resulting in improvement product quality and reduction of safety incidents Ensure OSHA compliance - electrical , mechanical and environmental Develop and manage budget for engineering and maintenance divisions of organization Education & Experience • Bachelor’s degree in Engineering (Mechanical, Electrical, Industrial, Manufacturing, or related field required)., • Advanced degree, PE license, or certifications (Lean Six Sigma, PMP, CMRT) +++, • Min of 15+ years of progressive engineering leadership experience in manufacturing and/or distribution environments., • Demonstrated success managing trades-based maintenance teams (welders, electricians, technicians)., • Ability to travel up to 50%

Job DescriptionFor 185 years, Rodney Hunt has been the trusted engineering partner behind complex flow-control solutions in the municipal water sector. Our team supports mission-critical infrastructure—from major Oil & Gas clients including ARAMCO, Bechtel, and Technip to large U.S. government contracts for the Navy and U.S. Army Corps of Engineers. We are seeking a Sales Engineer who owns the hunt—someone who can open doors, build relationships in the water market & consistently turn opportunities into revenue. Job Overview: Are you a closer who loves the hunt? We’re looking for a driven Sales Engineer who thrives on winning new business, opening accounts, and being first in the door. If you are self-motivated, competitive, and at your best when you're turning leads into contracts, this role is built for you. Key Responsibilities: Drive sales growth within the assigned territory through proactive outreach, relationship development, and project pursuit. Promote Rodney Hunt sluice gates and flow-control products to consultants, contractors, representatives, and municipal agencies. Deliver technical expertise and application-specific solutions to ensure products meet project specifications. Travel to the territory up to twice per month to conduct presentations, meet end-users, and visit consultants/contractors. Manage the full sales cycle—from lead generation and bid follow-up to contract negotiation and close. Partner with internal Engineering, Estimating, and Project Management teams to support accurate proposals and seamless project handoff. Attend trade shows, conferences, and industry events to represent the Rodney Hunt brand. Prepare forecasts, pipeline reports, and territory-level performance updates for leadership. Qualifications: Bachelor’s degree in mechanical, civil, chemical, or a related engineering field is preferred, along with at least 2 years of industrial sales experience. Self-starter with a result-driven approach and the ability to close sales consistently. Excellent written and verbal communication skills. Familiarity with CRM software and sales processes is a plus. Equal Opportunity Employer Rodney Hunt is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, or any other protected characteristic. Employment offers are contingent upon successful completion of reference checks. This role is intended for candidates authorized to work in the United States; sponsorship is not available. Powered by JazzHR ihuINqqDDo

Job DescriptionDescription: Reliability Consultants to provide deep asset reliability expertise to clients across the chemicals industry. The role focuses on improving equipment reliability, asset availability, mechanical integrity, and plant stability across batch, continuous, and specialty chemical operations. Consultants will assess existing reliability practices, identify performance, and risk gaps, and implement best-in-class reliability strategies, standard work, and digital / AI-enabled tools to deliver sustainable improvements in asset integrity, cost, unplanned downtime reduction, and overall manufacturing performance. Key Responsibilities Reliability Excellence Assessment & Roadmap Definition • Independently assess asset reliability, and mechanical integrity practices across batch, continuous, and specialty chemical operations., • Benchmark site performance against industry best practices and peer operations to identify gaps and improvement opportunities., • Develop fact-based reliability excellence roadmaps, prioritizing initiatives based on risk, value, and ease of implementation., • Provide objective, data-driven insights to client leadership on reliability risks, cost drivers, and asset performance. Asset Performance & Reliability Improvement Implementation • Lead or support implementation of reliability improvement initiatives, including asset criticality, failure mode management, and risk-based maintenance strategies., • Identify and eliminate chronic equipment issues and systemic causes of unplanned downtime., • Align operating discipline, maintenance practices, and execution routines to improve plant stability and asset life., • Translate recommendations into practical, site-ready actions with clear ownership and timelines. Mechanical Integrity, Safety & Risk Assurance • Review and strengthen Mechanical Integrity and reliability-related PSM elements, including inspection regimes, MOC, PSSR, and asset risk management., • Conduct field audits, maintenance walkdowns, and failure investigations to identify integrity and safety risks., • Provide independent challenge and assurance that reliability improvements are implemented safely and in compliance with site and regulatory requirements., • Support closure and sustainability of corrective and preventative actions. Reliability Analytics, KPIs & Performance Control • Assess reliability data quality and usage across CMMS/EAM, downtime systems, and condition monitoring tools., • Define and implement reliability KPIs, dashboards, and governance routines to support sustained performance management., • Quantify and track benefits from reliability initiatives, including reductions in downtime, maintenance cost, and operational risk., • Provide transparent reporting to site and corporate leadership on progress and impact. Maintenance Strategy, Turnarounds & Execution Excellence • Review and optimize maintenance strategies, planning, and scheduling to improve execution effectiveness and wrench time., • Support turnaround and shutdown assessments, readiness reviews, scope optimization, and post-event learning., • Embed lessons learned into standard work and future maintenance strategies. Digital Enablement & Capability Transfer • Assess and deploy digital and AI-enabled reliability tools (CMMS/EAM optimization, predictive analytics, condition monitoring) to improve decision-making., • Transfer knowledge through coaching, training, and development of standard work to ensure sustainability post-engagement., • Education: Bachelor’s degree in chemical engineering or a closely related field. A master’s degree is a plus., • Certifications: CMRP (Certified Maintenance & Reliability Professional) or CRL (Certified Reliability Leader) preferred. Experience: • Minimum 8+ years of experience in chemical manufacturing (petrochemical, specialty chem, or refining), with a strong emphasis on asset reliability, maintenance engineering, or reliability engineering roles within batch or continuous process environments., • Hands-on experience working closely with operations and maintenance, including time spent in plant/area engineering, reliability engineering, maintenance leadership, or rotating equipment roles supporting day-to-day plant performance., • Strong background in reliability fundamentals, including asset criticality analysis, failure modes and effects analysis (FMEA), RCFA, preventive and predictive maintenance strategies, and reliability data analysis., • Direct involvement in turnarounds, shutdowns, and major maintenance events, including scope development, job planning, execution support, risk management, and post-event performance review., • Demonstrated ability to drive reliability and asset performance improvements, such as reduced unplanned downtime, improved equipment availability, maintenance cost optimization, and increased mean time between failures (MTBF)., • Proven track record of delivering measurable improvements in reliability, safety, and cost through improved maintenance strategies, work management, spare parts optimization, and collaboration with operations., • Familiarity with PSM requirements and mechanical integrity programs, including MOC, HAZOP/LOPA interfaces, inspection regimes, safe work practices, and disciplined asset lifecycle management in a regulated chemical environment. Technical Skills: • Strong knowledge of chemical plant reliability and maintenance practices, including asset criticality, mechanical integrity programs, preventive and predictive maintenance, work management, and reliability-centered maintenance (RCM)., • Working knowledge of core chemical processes (e.g., reaction, distillation, crystallization, polymerization, separation, drying, blending) with an understanding of how process conditions and operating discipline impact equipment health, failure modes, and asset life., • Familiarity with PSM and Mechanical Integrity requirements, including PHA/HAZOP interfaces, MOC, PSSR, inspection and testing regimes, and safe work practices in regulated chemical environments., • Experience with reliability-focused digital tools, such as CMMS/EAM systems (SAP, IBM Maximo, Infor/Hexion, etc), condition monitoring and predictive analytics, mobile maintenance execution, reliability dashboards, and visual management of asset performance. Soft Skills: • Exceptional analytical and problem-solving skills., • Strong written and verbal communication skills, including the ability to present complex technical information to non-technical stakeholders., • Ability to work independently and as part of a global, multi-disciplinary team., • Willingness to travel extensively to client sites.

Job Description Position Summary: The Quality Lead plays a critical role in ensuring that aluminum products meet EMS and customer specifications. This position involves inspecting and testing raw materials, in-process components, and finished products, conducting quality tests, and supporting continuous improvement initiatives within EMS distribution and manufacturing environments. Essential Duties/Responsibilities: • Audit workers engaged in inspection and testing activities to ensure high productivity and high technical integrity., • Inspect incoming inventory from mills for defects, dimensional accuracy, and compliance with industry standards., • Conduct in-process and final inspections of manufactured products., • Perform mechanical and visual tests using calipers, micrometers, hardness testers, and other precision instruments., • Document inspection results and maintain detailed quality records in accordance with ISO standards., • Identify non-conforming products and assist in root cause analysis and corrective action implementation., • Collaborate with production, warehouse, and engineering teams to resolve quality issues., • Ensure compliance with industry standards such as ASTM, ISO, and customer-specific requirements., • Participate in continuous improvement initiatives including 6S, Lean, and Six Sigma projects., • Keep areas clean and organized, • Performs other related duties as required Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education: • High school diploma or equivalent required; bachelor's degree in related field preferred, • Be able to read, write and communicate in English effectively, • Valid driver's license Experience/Skills/Abilities Required: • Familiarity of precision measuring instruments such as calipers, micrometers, protractors, and taper gauges to verify dimensions against engineering drawings preferred, • The ability to accurately read and interpret engineering drawings and specifications is preferred., • Basic understanding of the aluminum extrusion process and common die defects., • Basic understanding of the painting process and common paint defects., • Extreme attention to detail, • Proficient in Microsoft Office, • Ability to multitask and prioritize effectively, • Ability to work independently and as a team, • Good communication and interpersonal skills Work Environment/Physical Demands: • Standing up to 8 hours per day, • Able to lift 50 pounds, • Able to work in warehouse atmosphere with varying temperatures We are an equal opportunity employer, dedicated to fostering a diverse and inclusive workplace where everyone is valued and has equal access to opportunities. WE ARE A DRUG FREE WORKPLACE. Job Posted by ApplicantPro

Job DescriptionSalary: Controls Engineer - Houston, Texas Are you looking for a career where you will have an immediate impact and drive projects to a successful completion? Are you motivated to help local manufacturing industries increase their competitive advantage and achieve their energy efficiency goals? Are you looking to join an organization of engineers that is owned and managed by fellow engineers? Applied Control Engineering, Inc. (ACE) provides automation solutions to a diverse set of industries, including chemicals, pharmaceuticals, industrial gases, discrete manufactured products, and more. ACE serves our customers out of nine offices in seven states (Colorado, Connecticut, Delaware, Massachusetts, Maryland, Pennsylvania, and Texas). ACEs vision is for continued growth to meet the automation challenges of Americas manufacturing industries. Engineers at ACE have become industry leading technical experts, project managers, sales engineers, and engineering managers. ACE is seeking level, passionate engineers to join our team. Would you like to join our team? JOB OVERVIEW As a Controls Engineer at ACE, you will join a project team delivering automation projects to customers. Your primary job functions will include: • Designing, developing, and documenting systems which meet our customers requirements., • Leading project teams in order to ensure quality deliverables., • Communicating with customers, both at the office and on-site, to present your work and come up with unique solutions., • Traveling to customer sites to implement and test project deliverables., • Meeting with project managers, subject matter experts, and business leadership to assess your projects status and determine the most effective approach for successful completion., • Mentoring fellow engineers to teach control concepts and project methodologies. The successful applicant will have opportunities for advancement into ACEs senior leadership organization. ACE offers professional development opportunities within all departments of our organization. Engineers at ACE have opportunities for advancement that include technical leadership, project management, sales, and engineering management. ACE is currently managed and owned by engineers who have all worked as process control system engineers at ACE. PREFERRED EDUCATION Bachelors (or higher) degree in Chemical Engineering, Electrical Engineering, Mechanical Engineering, Robotics Engineering, Bioengineering, Industrial Engineering, Computer Engineering or Computer Science. REQUIRED SKILLS & EXPERIENCE • Three+ (3+) years of experience with control systems in manufacturing industries., • Experience configuring PLC, HMI, SCADA, DCS, and/or MES applications., • Understanding of process control or other manufacturing processes., • Proven experience in delivering projects to success conclusion., • Ability to handle a project through its entire lifecycle., • Strong written and oral communication skills that allow you to communicate complicated concepts both internally and externally., • Thorough knowledge of business application software (MS Office package)., • Displays a positive and professional demeanor., • Demonstrates a flexible and cooperative working style., • Willing to work off-hours when required., • Must possess a valid drivers license., • Licensed Professional Engineer or Engineer in Training (EIT) Certification, • Certifications from Industry Technology Partners Applied Control Engineering, Inc. (ACE) provides employees with a comprehensive and attractive benefits package and salary ranges commensurate with experience. For more information about Applied Control Engineering, Inc. (ACE), please visit our website at . ACE is committed to a drug-free workplace. All employment is contingent upon successful completion of drug and background screening. ACE is an equal opportunity employer. ACE will consider all qualified applicants for employment without discrimination on grounds of disability, sex or sexual orientation, race or national or ethnic origin, age, religion, protected veteran status or any other characteristic protected by law. If you need a reasonable accommodation to meet any of the above qualifications, please contact Human Resources.

Job Description ESSENTIAL JOB FUNCTIONS: 1. Interview, hire, train, recommend performance evaluations, resolve problems, provide open communication and recommend discipline and/or termination when appropriate., 2. Troubleshoot and repair malfunctions in mechanical or electrical systems (e.g., HVAC, plumbing) and other equipment throughout the hotel., 3. Perform preventative maintenance assignments on a scheduled basis., 4. Respond in a courteous manner to all guest questions, complaints, and or requests to ensure strong guest satisfaction., 5. Communicate with hotel department heads to become aware of maintenance needs and ensure timely response to internal requests., 6. Service the hotel's pool, including adjusting chemicals and cleaning filters; completing maintenance request forms and record logs., 7. Maintain the building exterior and "curb appeal" (e.g., snow removal, lawn care, painting, and gardening)., 8. Maintain franchise standards and follow-up on inspection deficiencies., 9. Coordinate compliance of service contracts., 10. Implements and maintains Crescent’s preventative maintenance program., 11. Implement and maintain Crescent’s room care programs., 12. Implement and maintain Crescent’s engineering department minimum standards., 13. Assist General Manager with annual Capital Plan development., 14. Actively participate in Crescent’s Safety Plan and energy improvements., 15. Communicate both verbally and in writing to provide clear direction to staff., 16. Comply with attendance rules and be available to work on a regular basis., 17. Perform any other job related duties as assigned

Job DescriptionPosition: Controls Application Engineer Start Date: Immediate As a Controls Application Engineer, you will be responsible for developing BMS/SCADA applications at both a supervisory and controller level. You will help refine engineering standards and provide remote support to project and field teams. You will also be involved in providing support across multiple engineering functions within the Controls Engineering group. You should be familiar with both DDC and PLC programming, BACnet & Modbus integrations, and have experience with building graphical front-end client interfaces.Controls Application Engineering • This position will report to the Controls Engineering Manager., • Develop BMS applications across multiple platforms: e.g., Niagara, Ignition, Wonderware, Distech, PLC's., • Support the development and enforcement of engineering standards for programming, graphics, alarming, tagging, history management, and database creation., • Provide remote technical support to Project Managers and Field Engineers during project execution. Qualifications, • 10+ years of experience in the engineering field, preferably in Building Automation or Controls Engineering., • 5+ years of BMS application development experience, with mission critical experience preferred., • Strong knowledge of DDC control theory & HVAC applications and the ability to apply these principles to real-world scenarios., • Basic networking knowledge; addressing & subnetting, IP + serial device configurations., • Comfortable working with industry standard protocol integrations such as: BACnet, Modbus, Ethernet/IP, SNMP, MQTT., • Basic networking knowledge, including manipulating PC settings to set up and commission devices on a network., • Experience with servers, network equipment, and IoT practices, specifically for BMS applications., • 2+ years of experience with Niagara platform (Niagara N4 certification is preferred)., • Familiarity with Distech field controllers and GFX programming, Ignition SCADA, Wonderware, and PLC systems., • Proficiency in Microsoft Office Suite.Competencies, • Must be able to work independently and in a team, handling multiple tasks across different projects., • Strong troubleshooting skills, with the ability to identify problems and develop effective solutions., • Knowledge of the construction contracting industry, especially in MEP fields, with experience in mission-critical environments a plus.

Job DescriptionDescription: Position Title: Quotation Engineer Department: Quotations Reports To: Quotation Manager FLSA Classification: Non-Exempt Job Type: Full-Time Schedule: Day shift / Monday – Friday 8 - 5, Saturdays (8 - 12) About Piping Technology & Products (PT&P)Founded in 1978 and based in Houston, TX, PT&P is a leading manufacturer of engineered pipe supports and other piping system products used in power, refining, chemical, and related industries. We’re known for fast turnaround, reliable quality, and a strong commitment to helping our customers keep critical infrastructure running. With a wide range of in-house capabilities, PT&P continues to grow while staying focused on innovation, service, and long-term partnerships. Join our team and help deliver solutions that keep critical infrastructure running safely and efficiently.Position Summary Piping Technology & Products, Inc. is seeking a detail-oriented and technically proficient Quotation Engineer to support our pipe support product line. This role involves analyzing customer RFQs, preparing detailed quotations, coordinating closely with engineering and sales teams, and ensuring rapid, accurate responses to inquiries. The ideal candidate has a strong understanding of pipe support systems, a customer-focused mindset, and the ability to manage multiple priorities in a fast-paced environment. Key Responsibilities • Review and interpret customer specifications, drawings, and technical requirements., • Prepare and submit accurate quotations based on project scope, pricing structures, and company standards., • Ensure compliance with industry codes, client specifications, and project requirements., • Conduct post-quote follow-ups with sales to assess customer interest and coordinate modifications., • Contribute to process improvements aimed at reducing quote turnaround time and improving quote accuracy., • Collaborate with project engineers and the sales team to validate commercial and technical details., • Provide technical support to clients.Requirements: Required Skills & Qualifications • Bachelor’s Degree in Mechanical Engineering preferred., • Proficiency with AutoCAD or other CAD tools is a plus., • Proficiency in reading technical drawings, BOMs, and specifications., • Strong communication and interpersonal skills. This is a full-time, in-person position located at: 3701 Holmes Rd, Houston, TX 77051

Job DescriptionPurpose of the position Responsible for maintain, optimize, and troubleshoot fixtures of SMT (Surface Mount Technology, consumer electronics industry) fixtures(tools to support PCB or pressing PCB, such as: SMT Holder/Carrier/JIG). Collaborate closely with production, engineering, and quality teams to ensure fixture Reliability, improve yield, and improve fixture usage efficiency. Duties and Responsibilities • Fixture design: analyze and design fixture designs using CAD software and propose improvements., • Fixture purachse: Work cross-functionally (production,asset department) to enhance fixture arrived before built start., • New fixture/tools IQC(incoming quality control)：follow IQC inspection procedures to check the samples meet the specification requirement or not;, • Fixture/tools diagnose, repair: to ensure fixture performance and reduce maintenance costs. Work Experience: 1-3 years of experience in Fixture/JIG maintenance, tooling design, or precision equipment repair (electronics/smartphone manufacturing preferred). Working conditions 1.Join a high-growth, innovation-driven team shaping next-gen consumer electronics. 2.Work at the intersection of engineering, automation, and global operations. 3.Modern, collaborative offices or labs with flexible setups emphasizing innovation and teamwork. Skills: Understand SMT process flow, proficient in using CAD drawing software, possess mechanical troubleshooting skills Capability: Possess good problem-solving ability, team collaboration spirit, meticulous and careful work Powered by JazzHR H5yEwGUyzD

Job Description Instrument Engineer CAM Integrated Solutions is a leading provider of engineering, procurement, construction (EPC), consulting, fabrication and technical field services for Upstream, Midstream, Transmission and Renewable Natural Gas (RNG) projects. Position Summary CAM is actively seeking a experienced Instrument Engineer for the Houston, TX office. The ideal candidate will have expertise in designing, implementing, and maintaining instrumentation and control systems for various projects within these sectors. As an I&C Engineer, you will play a key role in system design, ensuring compliance with industry standards and regulations. If you are a skilled I&C Engineer looking to join a dynamic team and contribute to exciting projects, we encourage you to apply. Key Tasks and Responsibilities • · Develop and maintain the Instrument Index, C&Es, Control Narrative, I/O Lists, • · Specification of Flow, Level, Pressure and Temperature instrumentation., • · Instrument selection and sizing calculations for CVs, PSVs, ROs, and TWs, • · Support the development of Network Architecture, Instrument Location Plans, and Wiring Diagrams., • · Coordinate with the project team for the development of P&IDs and Alarm Setpoints., • · Develop RFQ packages and provide Bid Tabulations for the procurement process., • · Provide technical support during the construction phase, responding to RFIs and addressing any issues that arise., • · Reviews and approves vendor documents., • · Participate in occasional factory inspection assignments and field walk downs., • · May also function as the Lead Instrument Engineer, responsible for all discipline technical and scheduling matters pertaining to the assigned project. Training and Specialty Skills: • · Bachelor's degree in Electrical, Mechanical, or Chemical Engineering or a related field., • · Proven ability to work in a fast-paced environment, managing multiple tasks and priorities with a proactive attitude., • · Strong understanding of instrument engineering principles, practices, and international standards (e.g. ANSI, API, IEC, ISA and NFPA)., • · Excellent communication skills, both verbal and written, with the ability to collaborate effectively with cross-functional teams, vendors, and end-users. Authorization to work permanently in the U.S. without sponsorship required.

Technical writing skills with an understanding of business management concepts. These services include planning and systems studies, design and engineering, maintenance and testing, program management, construction, and turnkey EPC projects. Currently majoring in Electrical Engineering, Mechanical E

Perform engineering calculations and apply engineering principles to assist in the successful design, creation, and delivery of all mechanical AutoCAD and Revit drawings for each client project. Mechanical Engineering or related field. Successful completion of the Fundamentals of Engineering (F.

Job Description What Cognite is: Relentless to achieve Cognite operates at the forefront of industrial digitalization, building AI, and data solutions that solve the world's hardest, highest-impact problems. With unmatched industrial heritage and a comprehensive suite of AI capabilities, including low-code AI agents, Cognite accelerates the digital transformation to drive operational improvements. We thrive in challenges. We challenge assumptions. We execute with speed and ownership. If you view obstacles as signals to step forward - not backwards - you'll feel right at home here. Our Moonshot is bold: Unlock $100B in customer value by 2035, and redefine how global industry works. Join us in this venture where AI and data meet ingenuity, and together, we will forge the path to a smarter, more connected industrial future. How you'll demonstrate Ownership The Enterprise Field Engineering team leads the technical relationship as a customer scales beyond initial implementations and deployments into broader expansion and full enterprise-wide adoption. Enterprise Field Engineers help to validate technology fit, architect and demonstrate new use cases and support deployment and operationalization as adoption expands. They are also essential in enabling our partner ecosystem, ensuring solution integrity, and elevating the Cognite experience through feedback loops to Product and Customer Enablement. The Enterprise Field Engineering team works in close partnership with the Account Management team to grow and expand customers to enterprise scale and beyond.The Impact you bring to Cognite Client Engagement and Solution Development • You act as a technical liaison to key clients, establishing trusted relationships and ensuring alignment on solutions, integration architectures, and technical roadmaps to secure their willingness and confidence to scale and expand their use of Cognite Data Fusion®., • You educate clients on Cognite Data Fusion® and related offerings, leading to successful adoption, solution integration, and value realization., • You develop client-focused demos, reference architectures, and solution accelerators utilized by Cognite teams and customers., • You act as a bridge between clients and Cognite's Product organization, translating client feedback and needs into clear, actionable product requirements., • You ensure client-integrated solutions are technically feasible, scalable, and aligned with Cognite's broader product strategy., • You partner with field engineering and sales teams to provide technical support on client opportunities, including technical account strategy, solution architecture, and use-case development., • You serve as a technical escalation point for complex client engagements, offering guidance and assistance to the broader sales organization., • You develop and promote best practices, frameworks, and reference architectures to strengthen Cognite's position as a leader in client-focused industrial solutions., • You mentor other Field Engineers, sharing technical expertise and best practices related to client engagement and solution development., • You share insights and learnings from client interactions to enhance team effectiveness and responsiveness to market demands. Required qualifications • Extensive experience (5+ years) in solution architecture, field engineering, or technical presales/postsales roles, ideally in enterprise SaaS, cloud platforms, or industrial software., • Hands-on in Python, as well as good hands-on expertise with software development best practices., • Strong client-facing skills, with experience building trusted relationships with technology partners, enterprise clients, and internal stakeholders to co-create solutions and drive joint opportunities., • Expertise in industrial data, OT/IT convergence, and data integration patterns, with the ability to design scalable architectures that connect operational and enterprise systems., • Education or practical experience relevant to our key industry focus areas. (E.g. petroleum engineering, chemical engineering, mechanical engineering, control system engineering, process engineering, etc.), • Knowledge of services and architectures provided by hyper scalers such as Azure, AWS and GCP., • Demonstrated ability to lead technical validations and solution accelerators that showcase the value of complex integrated solutions to partners and customers., • Experience working closely with product and engineering teams, providing field feedback to shape product development and align solutions with customer and partner needs., • Strong communication, presentation, and influencing skills, with the ability to translate complex technical concepts into business value for diverse audiences including executives, partners, and technical teams.Learn more about us, • Impact 2025, • Cognite's Industrial AI: Moonshot, • We're globally recognized domain experts with an international presence that spans Phoenix, Houston, Oslo Tokyo, Bengaluru, and Abu Dhabi.Equal OpportunityCognite is committed to creating a diverse and inclusive environment at work and is proud to be an equal opportunity employer. All qualified applicants will receive the same level of consideration for employment.

Job Description About the Role We are seeking a motivated, experienced Industrial Sales Representative to lead business development efforts for our industrial ventilation solutions. This position is ideal for someone with a strong technical aptitude, existing customer relationships, and a proven track record of selling into industrial environments. You will work directly with OEMs, manufacturing plants, and industrial facilities, delivering engineered ventilation solutions for products integration and operational challenge Key Responsibilities • Develop and grow sales of industrial ventilation products / solutions across assigned territories., • Manage and expand relationships with OEMs, system integrators, and manufacturing customers., • Identify new business opportunities, conduct site visits, and provide technical product insights., • Build and maintain a healthy sales pipeline and forecast accurately., • Prepare proposals, negotiate contracts, and close deals., • Industrial sales experience is mandatory (minimum 3+ years preferred)., • Ability to understand basic technical concepts (ventilation, mechanical systems, airflow, equipment specs, etc.)., • Experience selling into industrial markets, OEMs, or manufacturing facilities., • Strong communication, presentation, and negotiation skills., • Willingness to travel frequently. Preferred Qualifications • An established portfolio / existing customer network in industrial or manufacturing markets., • Experience with engineered products, ventilation systems, or mechanical equipment., • Technical background or hands-on industrial field experience. Compensation & Benefits

Job DescriptionWe are seeking a Senior Optical Engineer to join our Optical NPI team to support the development and scaling of next-generation optical switch products from New Product Introduction (NPI) through high-volume manufacturing. This role focuses on the optical subsystem architecture, performance margins, tolerances, contamination sensitivity, and system stability, and will drive validation, characterization, and production readiness from prototypes through product maturity. This is a highly cross-functional role working closely with NPI, test engineering, manufacturing teams, and customers to ensure robust optical performance and scalable production solutions. Key Responsibilities • Lead deep-dive investigations of complex optical path issues, identifying root causes and driving improvements across design, test, fixtures, and manufacturing processes through structured experiments and DOE methodologies., • Partner with NPI and Test Engineering teams to develop manufacturable optical measurement strategies, including selection and integration of optical test equipment for product development and production environments., • Collaborate with customers and internal teams to define and implement optical inspection and cleaning processes to improve yield, reduce retest rates, and maintain optical performance standards., • Support Site Acceptance Testing (SAT) for automated optical inspection and cleaning systems by defining acceptance criteria, conducting qualification and correlation studies, and closing readiness gaps prior to production release., • Qualify optical test equipment and stations through measurement system analysis, including Cg/Cgk, GR&R, and station-to-station correlation studies., • Analyze production and test data to identify performance gaps and implement corrective actions prior to mass production., • Bachelor’s or Master’s degree in Optical Engineering, Electrical Engineering, Physics, or a related technical field., • 5+ years of experience in optical engineering, optical testing, or optical manufacturing/NPI supporting complex hardware systems in laboratory or production environments., • Proven experience troubleshooting optical path issues, including fiber connectors, end-face quality, contamination control, and optical signal integrity., • Hands-on experience implementing optical measurement systems, including automation, calibration, data logging, and traceability., • Experience defining and validating optical inspection and cleaning processes in collaboration with cross-functional or customer teams., • Strong experimental and analytical skills with experience conducting structured experiments (DOE) and applying data-driven decision making., • Experience with optical switching products or high-speed networking optics, including fiber-based interconnects, optical modules, or optical assemblies., • Familiarity with high-speed optical link testing and performance metrics such as BER, eye diagrams, jitter margin, and signal integrity analysis., • Experience supporting equipment qualification and production readiness, including SAT planning and execution., • Working knowledge of measurement system capability analysis including Cg/Cgk, GR&R, and correlation studies. Foxconn Industrial Internet is an Equal Opportunity Employer and considers applicants without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law. Powered by JazzHR 0sIuQeappH

Job Description Hire Resolve is assisting petrochemical organizations in hiring experienced petrochemical professionals to support refinery, chemical, and downstream manufacturing operations across the United States. This is a multi-role opportunity spanning several functions within the sector—such as plant operations, process and project engineering, reliability and maintenance, EHS/PSM, quality, supply chain, and commercial/technical services. These openings are designed for mid- to senior-level talent and offer a clear pathway toward senior leadership roles, including superintendent, plant/area manager, engineering manager, and regional leadership positions. Key Responsibilities • Lead and optimize safe, efficient plant operations across continuous and batch processes, utilities, and supporting units, • Drive process improvements, debottlenecking, yield optimization, energy efficiency, and cost reduction initiatives, • Support or lead capital projects from scope definition through execution, commissioning, and handover (FEL/front-end planning through start-up), • Develop and maintain technical documentation, procedures, and operating envelopes (P&IDs, SOPs, MOCs, PSM elements, etc.), • Strengthen reliability programs including preventive/predictive maintenance, RCA, turnaround planning, and asset integrity strategies, • Ensure compliance with OSHA process safety management (PSM), EPA risk management expectations (where applicable), and site EHS programs, • Implement risk assessments and safe work systems (PHA/HAZOP participation, JSA, LOTO, contractor safety oversight), • Manage cross-functional teams and stakeholders (operations, maintenance, engineering, labs, contractors, vendors) to deliver site goals, • Monitor KPIs and performance dashboards for safety, production, quality, reliability, and budget adherence, • Support audits and inspections; coordinate corrective actions and continuous improvement plans, • Bachelor’s degree in Chemical Engineering, Mechanical Engineering, Electrical Engineering, Industrial Engineering, Chemistry, or a related technical discipline (advanced degree or relevant certifications are a plus), • Typically 7–15+ years of experience in petrochemical, refining, specialty chemicals, polymers, industrial gases, or adjacent process manufacturing environments, • Working knowledge of core petrochemical processes and plant systems, with demonstrated exposure to one or more functional tracks (operations leadership, process engineering, reliability, maintenance, EHS/PSM, projects, quality, or commercial/technical support), • Familiarity with U.S. safety and compliance expectations (OSHA, PSM, LOTO, contractor safety; EPA and DOT awareness depending on role/site), • Competency with common engineering and maintenance systems (e.g., SAP/Maximo, PI System or similar historians, MOC/PSM tools, CMMS, basic data analysis in Excel), • Strong communication skills for plant-floor execution and cross-functional leadership; able to document, present, and influence stakeholders, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Training & Development

Job DescriptionPurpose of the position Manage the full lifecycle of company assets, including equipment/fixture procurement, customs clearance/importation, and ongoing asset tracking. This role ensures cost-effective sourcing, compliance with import regulations, and optimal utilization of physical assets. Duties and Responsibilities • Procurement & Budgeting: Monthly collect spare parts/consumable demands, develop procurement budgets, create PN in systems, write PR and track ETA, • Prepare and submit accurate customs documentation (e.g., commercial invoices, packing lists) for imported equipment/jigs. Address customs audits, disputes, or duty refund claims proactively., • Inventory Management: Monitor spare parts and consumable stock levels, set reorder points, and conduct regular inventory counts/reconciliations. Optimize inventory turnover and minimize obsolescence/carrying costs., • Education and work experience, • Bachelor's degree or above in Mechanical Engineering, Industrial Engineering, Materials Science, or related fields., • 2 years or more of BOM management or related field experience, candidates with a manufacturing background are preferred., • 3 years or more of project management experience, with preference for those who have experience in large projects., • On-site work in a temperature-controlled manufacturing facility with designated cleanroom areas for precision equipment; compliance with ESD (Electrostatic Discharge) protection standards., • May require occasional weekend hours to support production plan, emergency repairs, or project implementation. Skills:, • Proficient in SAP/PLM/MES system operation, familiar with excel operation, • Have good logical thinking capacity, with relevant practical experience in data organization and analysis, • Cross-functional communication and collaboration, work diligently, carefully, patiently lMdhHqIIjk

Job Description Overview Spacecraft Parachute Lead Engineer Location: NASA Johnson Space Center Status: Full Time, Onsite Clearance: Background check U.S. Citizenship required Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! As NASA’s largest engineering solutions provider working together with NASA at centers across the United States. We have an exciting opportunity for a Spacecraft Parachute Lead Engineer to join the team. REQUIRED QUALIFICATIONS / SKILLS:DESIRED QUALIFICATIONS / SKILLS: *This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • Minimum of a bachelor's degree in Engineering and 5 years of related experience., • Familiarity with the details of current spacecraft capsule parachute systems, • Organizing, planning, and/or managing technical activities for the purpose of accomplishing defined objectives within schedule and budget constraints, • Knowledge of adjacent disciplines of aerodynamics, flight dynamics, and loads & dynamics, • Ability to effectively utilize oral and written communication to present technical data, concepts, and recommendations to personnel at all technical and managerial levels, • MS or Ph.D. in Mechanical or Aerospace engineering, • Extensive knowledge of principles, and practices involved in the definition, design, development, integration, test, manufacturing, and operations of parachute recovery systems, • Extensive experience with ground testing of textile components and assemblies, • Expertise in interpretation of ground test and flight data, • Experience with wind tunnel testing, • Experience with extracting aerodynamic data from flight testingRESPONSIBILITIES:, • Serve as a parachute lead for a spacecraft parachute system, providing oversight of the design, development, test, integration, verification, and validation for Commercial Crew Program (CCP), • Develop and maintain a detailed understanding of the spacecraft parachute system design trades, tests, operational mission constraints and risks, • Organize and lead inter-disciplinary independent verification and validation (IV&V) activities to ensure that parachute behavior is adequately characterized to support impacted requirements using modeling and flight-testing techniques, • Support requirements verification, IFA investigations, design change evaluations, • Interface with key stakeholders including but not limited to the Commercial Crew Program (CCP) Office, the CCP, • Integrated Aero science and Flight Mechanics System Manager, NASA JSC Safety and Mission Assurance group, and NASA Engineering and Safety Center (NESC), • Maintain a repository of key discussion points and facilitate weekly internal meetings with NASA stakeholders and biweekly discussion with spacecraft stakeholders #CJ #LI-AD1

Job Description RMS is seeking a skilled and experienced Oil-Free or Flooded Screw Compressor Mechanic to perform diagnostics, repair, and overhaul of oil-free screw compressors. The Oil-free or Flooded Screw Compressor Mechanic will have a strong mechanical aptitude, an attention to detail, and the ability to work independently or as part of a team. JOB REQUIREMENTS AND QUALIFICATIONS • Diagnose, troubleshoot, and repair, oil-free or flooded screw compressors., • Dismantle and reassemble compressors, replacing seals, bearings, rotors, and other components as necessary., • Maintain detailed service records, including parts used, repairs completed, and service recommendations., • Measure and install various types of process seals. (Many types), • Responsible for timing of compressors during final assembly., • Responsible for final assembly cleaning / bottle brush., • Responsible for bore scope inspection., • Comply with all safety protocols and environmental regulations., • Knowledge of rotary screw compressor systems., • Strong familiarity with OEM manuals, precision measuring tools, and compressor diagnostics., • Ability to read and interpret technical diagrams, blueprints, and schematics., • Strong understanding of pneumatic systems and mechanical tolerances., • High School Diploma/GED from an accredited school., • The position will be based full time in our Houston, TX Mepco Shop, • This is a full-time position, with a minimum expectation of 40+ hours per week. Additional hours, including evenings or weekends maybe required based on business need., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Able to understand, read, write, and speak English., • Must possess a valid driver’s license., • Must be able to legally work in the US and provide proper documentation., • Able to pass a pre-employment drug, alcohol test and background check., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Ability and willingness to lift objects weighing up to 30 lbs., 50 lbs. with assistance., • Ability to walk, climb, reach above head, and balance., • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50lbs. with assistance, walk, climb, reach above head, and balance., • Must be able to use hands for assembly and tool usage., • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs, • Tool, Shoe, and Safety Glasses reimbursement ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description We have a great opportunity for a Mechanical Engineer experienced in the water or wastewater field or in liquid processing to join our growing business. As Mechanical Engineer you will support Project Managers in the overall execution of a Capital Project and be responsible for the engineering support and deliverables required for a given project. We offer the opportunity to work on diverse engineering challenges with a supportive team and a flat structure where you will be able to add real value. About the role: • Support Project Managers with execution of Capital Projects within budget, schedule and to customer’s satisfaction., • Review and approve various drawings including P&ID, fabrication, single line, schematics, and other project related drawings., • Reviews Bill of Materials (BOM) for equipment / component design for compliance with engineering principles, contract requirements, and applicable standards., • Perform pump design & selection, hydraulic calculations, valve selections, instrumentation selection, and other equipment selection that meet contractual requirements and applicable standards., • Assemble, review, and / or approve specifications, data sheets, or other detailed information for specific components related to the project., • Specifying materials for purchasing including identifying vendors, initiating requests for quotation, making best price/best value purchasing determinations, specification compliance and tracking delivery of material., • Attend customer meetings / vendor meetings and offer meaningful input as it relates to the project., • Assist in the gathering of costs for equipment, labor estimates, subcontractor estimates, and other costs in preparation of proposals and commercial quotes. Requirements About you: • Bachelor of Science in Engineering (ME, ChE,) from an accredited, four-year university – ME preferred, • Demonstrated engineering experience in the water or wastewater field or fluid process engineering, • Experience with AutoCAD and applications is a plus, • Excellent customer service, communication, interpersonal, analytical, and problem-solving skills, • Strong time management and organizational skills, • Team oriented and Customer Focused, • Health Care Plan, • Retirement Plan, • Life Insurance, • Paid Time Off

Job DescriptionPurpose of the position 1. Full process management of equipment and spare parts and tracking of exception handling progress, 2. Registration, customs declaration, import and export coordination of newly purchased equipment, accessories and consumables, 3. Inventory/key accessories inventory status monitoring and management and formulation of consumables consumption standards Duties and Responsibilities 1. Overall management of spare parts and consumables, 2. Tracking of spare parts and accessories arrival, 3. Emergency dispatch of spare parts purchase, purchase progress tracking and exception handling, 4. Budget review Education and work experience Bachelor degree or above, major in electrical automation, mechanical engineering, automation, etc； 1 to 3 years of working experience Working conditions • Modern, collaborative offices or labs with flexible setups emphasizing innovation and teamwork.Skills:, • Have a certain ability to withstand pressure and be able to endure hardships, • Clear expression and good communication and coordination skills, • Have a strong sense of responsibility, ambition and execution, • Proficient in office software D5ooYwvQCI

Educated in Engineering at degree level or above: Mechanical, Electrical or Chemical Engineering. Every deal is engineered, bespoke, and operationally critical to your customer's business. Negotiating with senior stakeholders across engineering, operations, procurement, and leadership teams.

MWD Technology Development Lead Location: Houston, Texas Position status: Full-Time Exempt Status: Exempt Company Profile: CNPC USA is a subsidiary of China National Petroleum Company and serves as the North American headquarters. Our goal is to provide innovation, research, and development of new technologies for Oil and Gas Exploration and Production. Job Summary: We are seeking a highly skilled and motivated MWD Technology Development Lead to manage development projects supporting next-generation downhole measurement while drilling technologies. This role contributes to the design, analysis, validation, and commercialization of advanced MWD tools and subsystems that must operate reliably in harsh downhole environments, including high temperature, shock, vibration, and pressure conditions. Responsibilities: • Design and implement high-temperature MWD system architecture, ensuring scalability, performance, and durability in extreme downhole environments., • Design, analyze, and validate electronics systems and subsystems for MWD tools and related technologies., • Apply engineering tools and simulation software to evaluate performance, reliability, and environmental survivability of electronics assemblies., • Oversee tool testing and qualification, including lab validation, environmental testing, and reliability assessments, to ensure tool readiness for field deployment., • Support field trials and initial deployments, working closely with field personnel and customers to ensure successful operation and gather performance feedback., • Drive commercialization efforts, ensuring technical readiness and documentation for market release, while supporting product training and customer onboarding., • Maintain close communication with MWD vendors, technology partners, and industry experts to evaluate component sourcing and leverage external capabilities., • Bachelor's or Master's degree in Electronics Engineering, Electrical Engineering, Mechanical Engineering, or a related discipline., • Minimum five (5) years of experience in R&D, or product development., • Proven experience in developing or engineering high-temperature MWD or LWD systems, preferably with tools rated above 175°C., • Solid understanding of MWD components and technologies, including sensors, telemetry systems, and downhole electronics., • Experience integrating and validating complex downhole tools through structured testing and qualification processes., • Familiarity with MWD suppliers, component vendors, and manufacturing resources in the oilfield services industry., • Knowledge of drilling operations and rig-site practices; prior field experience is highly desirable., • Experience with commercial MWD platforms and downhole telemetry (mud pulse, EM, etc.)., • Familiarity with downhole vibration, shock, and thermal modeling. This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential job functions. While performing the duties of this job, the employee is regularly required to talk or hear. This is a sedentary role; however, some filing, bending and the ability to lift 20lbs is required. Travel: This position requires some overnight international and domestic travel. Local travel between other CNPC USA locations and testing facilities is required. Supervisory Responsibility: This position carries limited supervisory responsibilities, primarily focused on technical leadership, mentorship, and work coordination. This position is expected to: • Provide technical direction and guidance to junior and mid-level engineers, particularly in high-temperature MWD/LWD electronics development., • Review and approve technical designs, test plans, and engineering deliverables., • Support task planning, work prioritization, and technical resource coordination within assigned projects., • Contribute to performance feedback, skills development, and technical capability building of team members. CNPC USA is an Equal Opportunity Employer (EOE). Qualified applicants are considered regardless of race, color, age, sex, sexual orientation, religion, disability, ethnicity, national origin, marital status, veteran status, or any other legally protected status. Disclaimer: The job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Successful candidates will bring experience in mechanical design, FEA, creating detailed fabrication and assembly drawings, BOMs, design validation, and manufacturing support, along with the ability to work across engineering, production, quality, and field service teams. We’re looking for a Mecha

Experience in engineering, Installation support, pre-commissioning and commissioning support in mechanical engineering offshore oil & gas projects such as fixed platform, FPU, FPSO. Manage and guide the mechanical engineering team—including support from remote global offices—in preparing and rev

Job Description Summary The High Voltage GIS Site Supervisor is responsible for on-site supervision of installation, maintenance, repair, and modernization (retrofit) activities for GIS substations. The role represents GE Vernova on site and ensures work is executed safely, on schedule, and in full compliance with EHS requirements, U.S. regulations, and GE Vernova standards. Job Description Key Responsibilities * Supervise and coordinate GE Vernova field teams and subcontractors * Plan and manage installation, maintenance, repair, and modernization activities for HV GIS systems (69 kV - 800 kV) * Ensure work is performed in accordance with GE Vernova procedures, IEC / IEEE standards , contract requirements, and customer expectations * Enforce strict compliance with GE Vernova EHS policies and site safety rules * Monitor work quality and manage inspections, audits, and hold points * Lead safety meetings, Job Safety Analyses (JSA/AHA) , and daily toolbox talks * Serve as the primary on-site interface with the customer * Identify, troubleshoot, and resolve GIS-related technical issues * Prepare daily, weekly, and final site progress reports * Support commissioning and high-voltage testing activities when required * Coach and mentor junior supervisors and technicians US Regulatory Compliance - OSHA & Safety The Site Supervisor is accountable for compliance with U.S. safety regulations, including: * Compliance with OSHA regulations, including: * 29 CFR 1910 - General Industry * 29 CFR 1926 - Construction * Enforcement of NFPA 70E electrical safety and arc flash requirements * Implementation and verification of Lockout / Tagout (LOTO) procedures * Ensuring JSA / AHA are completed, communicated, and followed prior to work execution * Verification of required training, certifications, and PPE for all site personnel * Participation in EHS audits, OSHA inspections, and corrective action plans * Exercising Stop Work Authority when unsafe or non-compliant conditions are identified * Promoting GE Vernova's Zero Harm safety culture on site Skills & Qualifications * Proven expertise with High Voltage GIS substations (69 kV - 800 kV) * Strong background in installation, maintenance, repair, and retrofit activities * Solid knowledge of EHS, OSHA, NFPA 70E , and LOTO requirements * Ability to read and interpret electrical, mechanical, and layout drawings * Strong field leadership and customer communication skills * Fluent in English (spoken and written); French is a plus * Legal authorization to work in the United States Education * Technical degree or engineering background in Electrical Engineering or equivalent * HV, EHS, OSHA, NFPA 70E certifications are an advantage GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer () . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes For candidates applying to a U.S. based position, the pay range for this position is between $91,400.00 and $152,200.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. Bonus eligibility: discretionary annual bonus. This posting is expected to remain open for at least seven days after it was posted on March 17, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off. GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

At ABB, we help industries run leaner and cleaner-and every person here makes that happen. You'll be empowered to lead, supported to grow, and proud of the impact we create together. Join us and help run what runs the world. This position reports to: Project Operations Manager __ In this role, you'll help run what runs the world, by taking on meaningful work that drives real impact. The work model for the role is: hybrid (#Li-Hybrid) in the Houston, TX or Lake Mary, FL office with estimated 25% travel. This position also requires participation in a rotating on-call schedule. In this role, the Warranty Project Manager will be responsible for managing and coordinating all aspects of the warranty process for the projects within Electrification Solutions business. The Warranty Project Manager will be the main customer interface for all warranty claims, owning the process once initial claim is submitted to final resolution, including coordinating with internal and external vendors, as well as services where applicable by terms. This position will utilize your experience/expertise to solve problems and become a customer advocate to ensure minimal impact to customer operations. Your role and responsibilities • Warranty Management & Customer Advocacy: Serve as primary customer contact for warranty issues, ensuring timely, accurate resolution and acting as a strong advocate for customer needs., • Claims Assessment & Coordination: Review and validate warranty claims per contractual terms, prioritize multiple cases, and coordinate with vendors, field technicians, and internal teams to minimize customer downtime., • Process Execution & Documentation: Manage purchase orders, maintain detailed project records, and ensure compliance with HSE standards while driving efficient warranty execution and continuous process improvements. Our teams support each other, collaborate, and never stop learning. Everyone brings something unique, and together we push ideas forward to solve real problems. Being part of our team means your work matters - because the progress we make here creates real impact out there. Qualifications for the role: • Bachelor degree (electrical/energy/mechanical engineering degree preferred) with minimum 3 years of experience (project management, engineering or manufacturing experience preferred), • Problem solving skills, including creative issue resolution and excellent oral and written communication skills, including proficiency in English, • Strong analytical skills to interpret warranty claims vs coverage, • Organizational skills with high attention to detail and sense of urgency in dealing with tasks, as well as customer service skills We empower you to take the lead, share bold ideas, and shape real outcomes. You'll grow through hands-on experience, mentorship, and learning that fits your goals. Here, your work doesn't just matter, it moves things forward ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at 1-888-694-7762. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at 1-888-694-7762 or by sending an email to . Resumes and applications will not be accepted in this manner. ABB Benefit Summary for eligible US employees [excludes ABB E-mobility, Athens union, Puerto Rico] Go to MyBenefitsABB.com and click on "Candidate/Guest" to learn more Health, Life & Disability • Choice between two medical plan options: A PPO plan called the Copay Plan OR a High Deductible Health Plan (with a Health Savings Account) called the High Deductible Plan., • Choice between two dental plan options: Core and Core Plus, • Vision benefit, • Company paid life insurance (2X base pay), • Company paid AD&D (1X base pay), • Voluntary life and AD&D - 100% employee paid up to maximums, • Short Term Disability - up to 26 weeks - Company paid, • Long Term Disability - 60% of pay - Company paid. Ability to "buy-up" to 66 2/3% of pay., • Supplemental benefits - 100% employee paid (Accident insurance, hospital indemnity, critical illness, pet insurance, • Parental Leave - up to 6 weeks, • Employee Assistance Program, • Health Advocate support resources for mental/behavioral health, general health navigation and virtual health, and infertility/adoption, • 401k Savings Plan with Company Contributions, • Employee Stock Acquisition Plan (ESAP) Time off ABB provides 11 paid holidays. Salaried exempt positions are provided vacation under a permissive time away policy. Building a cleaner, smarter future takes all kinds of minds: the curious, the courageous, and the creative. That's why we welcome people from all backgrounds and experiences. Ready to make an impact? Apply today or visit to learn more about the impact of our solutions across the globe.

Application Engineering Intern (Summer 2026) Position: Application Engineering Intern (Summer 2026) Location: Houston, TX Academic Schedule: May – August 2026 (full-time, 40 hours per week, 12-15 week internship) During your internship, you will conduct various engineering projects in one or more areas of engineering. Interns will also have exposure to and learn various aspects of engineering practices in these areas during the course of a twelve-to-fifteen-week experience. Our interns also participate in our summer Career Readiness programming which provides professional development and networking opportunities that will equip you with the skill sets required to successfully transition from college to career. Essential Responsibilities • Support centrifugal pump selection and assist with proposal generation, • Review and interpret customer specifications, • Develop understanding of pump mechanics and overall pump operation, • Participate in special projects focused on process improvements, • Gain exposure to manufacturing processes related to pump production, • Complete training in Pump Fundamentals (Pumps 101), • Learn to read and interpret pump curves, • Build knowledge of pump anatomy and common pump symptoms We aim to pay our 'ITT'ers' fairly and competitively in the locations that they live and work. Pay-for-performance is a principle that we believe in, and employees are rewarded based not only on 'what' they accomplish, but also on 'how' they reflect ITT's values. ITT offers a competitive salary and robust total rewards package, such as health insurance, 401(k), short and long-term disability, paid time off, growth and developmental opportunities, and other incentive compensation programs. Specific benefits are dependent upon whether or not the position is part of a collective-bargaining agreement. The salary offered to a candidate is based several factors such as candidate experience and qualifications, location, as well as market and business considerations. Equal Pay Act Range 25-30

Maintenance Planner Scheduler The maintenance planner is responsible for ensuring that maintenance activities both repetitive and proactive are planned, scheduled, and tracked in an efficient and effective manner. Possess capability to identify, locate and source required materials/equipment required for repair. Anticipate potential problems before they arise (defect prevention and avoidable delays) and create a plan of action to address them. Reports to Facilities Director of Maintenance. Essential duties include creating, maintaining and reviewing a program of work, ensuring that work/repairs are completed on time and within budget, producing progress reports and forecasts for team members, clients and stakeholders, breaking large jobs down into phases of development, working with estimators to calculate the resources needed for a project, meeting with contractors and suppliers, demonstrating knowledge mechanical, electrical and plumbing repair, writing scopes of work for bid, support of Craft Supervisors, and performing other job-related duties as assigned. The position requires an undergraduate degree or Associate's degree in a closely related subject like information management, facility management, or engineering, relevant work experience, a Recognized Certified Maintenance Planner Course (with equivalent experience), and a valid Texas Driver's License preferred. Knowledge of best practices in planning and scheduling systems in adherence to university standards for maintenance of buildings and equipment, ability to comprehend and explain University policies, procedures, and practices as they relate to commercial construction, interpret and apply Safety guidelines to daily work, demonstrates full/complete subject matter knowledge in area of responsibility, requires command of technical and functional procedures, and lead and/or review the work of others in multiple job classifications performing diverse responsibilities. Skill in conducting inventory and surveillance of required materials and supplies for crafts, problem-solving and decision-making, multitasking and time management, operating equipment, coordinating work of others, verbal and written communication. Ability to respond to unplanned events (emergency situations) during and after standard hours to accommodate the needs of the university, prepare detailed reports, work independently, and communicate effectively. Five (5) to seven (7) years of related experience, strong computer skills with experience in Computer Maintenance Management System (CMMS). Prolonged standing and/or walking, handling moderate weight objects, using or carrying equipment, stoop, bend or lift, exposure to moderate risk of accident.

Product Specialist III / Product Specialist II - Global Renewable Energy Credit Providence, Rhode Island;New York, New York; Houston, Texas; Charlotte, North Carolina To proceed with your application, you must be at least 18 years of age. Acknowledge () Bank of America employees are required to meet all posting eligibility requirements prior to applying for any new position. Acknowledge () Refer a friend To proceed with your application, you must be at least 18 years of age. Acknowledge () Bank of America employees are required to meet all posting eligibility requirements prior to applying for any new position. Acknowledge () Job Description: At Bank of America, we are guided by a common purpose to help make financial lives better through the power of every connection. We do this by driving Responsible Growth and delivering for our clients, teammates, communities and shareholders every day. Being a Great Place to Work is core to how we drive Responsible Growth. This includes our commitment to being an inclusive workplace, attracting and developing exceptional talent, supporting our teammates' physical, emotional, and financial wellness, recognizing and rewarding performance, and how we make an impact in the communities we serve. Bank of America is committed to an in-office culture with specific requirements for office-based attendance and which allows for an appropriate level of flexibility for our teammates and businesses based on role-specific considerations. At Bank of America, you can build a successful career with opportunities to learn, grow, and make an impact. Join us! Job Description: The Engineer / Project Engineer will provide independent technical analysis and risk assessment for debt and tax equity financing across a diverse portfolio of energy and infrastructure assets. These include wind generation, solar across all scales (residential, commercial, utility), battery energy storage systems, data centers, conventional power, and emerging energy/power technologies. Responsibilities: * Perform detailed technical due diligence to evaluate project feasibility and identify design, construction, budget, schedule, contractual, and operating risks, including preparation of formal technical memoranda * Review project design documents, technical specifications, schedules, and construction methodologies for reasonableness and compliance with industry standards * Validate technical and economic assumptions in financial models and collaborate with deal teams to develop and review sensitivity analyses * Coordinate with and manage work performed by independent engineering and technical consulting firms * Monitor the technical performance of portfolio assets (e.g., generation, availability, O&M expenses, and major technical issues) * Partner with Portfolio Management on construction monitoring, post-COD performance reviews, and asset risk assessments * Support Origination teams by assisting with early-stage technical pre-screening of potential transactions * Evaluate and qualify equipment vendors, EPC contractors, and operators across multiple project types Required Qualifications: * 5+ years minimum experience in energy storage, engineering design, construction management, operations, owner's engineering and or technical consulting for energy or infrastructure assets * Strong understanding of project development, construction, and operational risks across renewable energy and related infrastructure sectors * Excellent written, verbal, and presentation skills, with the ability to clearly communicate complex technical concepts to non-technical stakeholders * Demonstrated ability to manage multiple transactions or workstreams simultaneously in a fast-paced environment * Proven client and stakeholder management capabilities Desired Qualifications: * A bachelor's degree in engineering or science (electrical preferred; mechanical, power or renewable energy systems, or other energy-related disciplines acceptable) * Energy Storage experience and or Data Center experience is a plus Skills: * Business Acumen * Loan Structuring * Product Management * Risk Management * Coaching * Consulting * Decision Making * Influence * Result Orientation * Credit Documentation Requirements * Portfolio Analysis * Regulatory Compliance * Stakeholder Management * Underwriting Minimum Education Requirement: High School Diploma / GED / Secondary School or equivalent Shift: 1st shift (United States of America) Hours Per Week: 40 Bank of America and its affiliates consider for employment and hire qualified candidates without regard to race, religious creed, religion, color, sex, sexual orientation, genetic information, gender, gender identity, gender expression, age, national origin, ancestry, citizenship, protected veteran or disability status or any factor prohibited by law, and as such affirms in policy and practice to support and promote the concept of equal employment opportunity, in accordance with all applicable federal, state, provincial and municipal laws. The company also prohibits discrimination on other bases such as medical condition, marital status or any other factor that is irrelevant to the performance of our teammates. View your "Know your Rights () " poster. View the LA County Fair Chance Ordinance () . Bank of America aims to create a workplace free from the dangers and resulting consequences of illegal and illicit drug use and alcohol abuse. Our Drug-Free Workplace and Alcohol Policy ("Policy") establishes requirements to prevent the presence or use of illegal or illicit drugs or unauthorized alcohol on Bank of America premises and to provide a safe work environment. Bank of America is committed to an in-office culture with specific requirements for office-based attendance and which allows for an appropriate level of flexibility for our teammates and businesses based on role-specific considerations. Should you be offered a role with Bank of America, your hiring manager will provide you with information on the in-office expectations associated with your role. These expectations are subject to change at any time and at the sole discretion of the Company. To the extent you have a disability or sincerely held religious belief for which you believe you need a reasonable accommodation from this requirement, you must seek an accommodation through the Bank's required accommodation request process before your first day of work. This communication provides information about certain Bank of America benefits. Receipt of this document does not automatically entitle you to benefits offered by Bank of America. Every effort has been made to ensure the accuracy of this communication. However, if there are discrepancies between this communication and the official plan documents, the plan documents will always govern. Bank of America retains the discretion to interpret the terms or language used in any of its communications according to the provisions contained in the plan documents. Bank of America also reserves the right to amend or terminate any benefit plan in its sole discretion at any time for any reason.

Job Summary: The Applications Engineer Intern will act as the technical expert to customers, distributors, agencies and Toshiba Sales involving the design, application and performance of Toshiba Industrial products. Responsibilities • Gain engineering experience by providing detailed technology support to customers, distributors, agencies and Toshiba Sales., • Provides technical support and product trouble-shooting to customers., • Work directly with other engineers and professionals in a team environment and see how Toshiba's engineers work together to deliver success., • Develop your skills under the supervision and guidance of experienced professionals., • Ability to work with student around college class schedule within standard business hours., • Training provided in Houston, TX. visitors in a welcoming and professional manner, • Verifying visitor IDs for security checks, • Answer and address incoming phone calls, • Reception area maintenance, • Welcome display updates for visitors, • Maintain executive conference. Restock supplies as needed Travel: None Requirements: EDUCATION/CERTIFICATION REQUIRED: Current enrollment in Electrical or Mechanical Engineering program at an accredited college or university. SKILLS AND EXPERIENCE: • Ability to work 40hrs per week at our office located in Northwest Houston, TX., • Must be a team player and able to work in a culturally diverse environment., • Ability to communicate effectively and efficiently, • Python and/or Java, • AutoCAD, • Microsoft Office (Excel, Word, Visio)

Mechanical or Electrical Engineering or Associate in Drafting/CAD related field or 2+ years of experience in lieu of a degree.

The Maintenance Technician supports operation, inspection, and light maintenance processes to mechanical, electrical and plumbing equipment and systems in assigned facilities. Assist the engineering team in the maintenance and repair of building and equipment. Perform general maintenance including c

Job Description Job title Industrial Electrician III Reports to Electrical Supervisor Job Purpose This position requires a high level of technical expertise in industrial electrical systems, preventive maintenance, troubleshooting, and adherence to safety protocols. You will be responsible for ensuring optimal operation of plant equipment and electrical systems in a fast-paced industrial environment. Duties & Responsibilities • Maintain a good working relationship with Operating personnel to maximize equipment reliability and uptime., • Analytically troubleshoot and resolve electrical malfunctions back to OEM Specifications., • Routinely checkthe performance of electrical equipment., • The employeeis responsible formaintainingmaintenance records, inspection reports, and processing Work Orders., • Ensure a clean and safe work area. Must follow all PPE policies and safety rules., • Operate within standard operating procedures (SOPs) and Job Safety Analysis (JSAs)., • Attend andparticipatein Line-Out meetings to communicate daily activities between incoming and outgoing Maintenance shift crews., • Make necessary equipment repairs during the shift to maintain equipment availability for production., • Participate in production startups, shutdowns, and changeovers as it pertains to equipment reliability and availability., • Perform required Daily, Weekly,Quarterlyand Annual check sheets asestablishedby the Maintenance Department and O.E.M. suppliers., • Install, troubleshoot, repair, andmaintainindustrial electrical equipment including motors, drives, PLCs, control panels, and sensors., • Interpret and work from electrical schematics, blueprints, and technical manuals., • Diagnose electrical issues using advanced testing equipment (e.g., multimeters, megohmmeters, thermalimaging)., • Education:, • High School Diploma/GED preferred but not required., • An electrical certification or technical degreeis preferred., • Years of Experience:, • 4 – 6 years of experience preferred.Workingin Industrial Electricalenvironmentand 2 years of experience working with Induction Electrical Equipment., • Job Knowledge:, • Required Knowledge of Industrial Welding and Annealing operations. Minimum 2 years of experience in High Frequency Induction Welding.Thermatoolor EFD., • Install, test, and commission induction heating equipment and control systems., • Diagnose and troubleshoot electrical and control system issues in induction machinery., • Minimum 5 years of experience in an industrial or manufacturing environment as an electrical technician., • Proficient with 480V 3-phase systems, VFDs, PLCs (Allen-Bradley preferred), and industrial automation systems., • Minimum 2 years of experienceAllen Bradley:ControlLogix Series, CompactLogix Series,MicroLogix Series., • Personal Competencies:, • Employees must be able to work with a flexible or rotating schedule which may require overtime when needed., • Experience with PLC programming and HMI systems (Allen Bradley), • Read, write & speak English in a clear and effective manner., • Ability to communicate effectively with co-workers., • Ability to work in a team environment., • Welding or mechanical maintenance skills a plus, • Strong understanding of power electronics, control systems, and high-frequency AC power., • Safety:, • Working conditions are normal for a manufacturing environment., • Loose fitting clothes and jewelry are notpermittedon site., • The ability to lift 25/50pounds regularly., • The ability to move safely over uneven terrain or in confined spaces., • The ability to see and respond to dangerous situations., • The ability to safely climb ladders while carrying 40 pounds., • The ability to work in loud, hot environments/extreme weather while wearing required PPE., • Ability to see 20-20 when corrected., • This position has the authority to stop an operation if hedeemsit necessary, for reasons of imminent safety and/orpossible equipmentdamage. However, he/she must notify the Operations Supervisor on duty and follow the established notification procedure if the interruption is for an extendedtime period.

Job Description SUMMARY • Sustain existing electrical and mechanical designs of equipment, facilities, components, products, and systems as required to support company goals., • Review and modify existing drawings and or indented Bills of Material BOM(s) to reflect design updates from engineering., • Effectively utilize Enterprise Resource Planning (ERP) software to create purchase requisitions & order parts and track progress of production parts., • Determine methods, procedures, and conditions for testing products to verify operability and functionality., • Travel to assist Atec companies field installation and preventative maintenance schedules., • Properly prepare and ship Atec products for domestic and or international travel., • Maintain customer relationships during ongoing installation efforts., • Must possess the ability to follow written and oral instructions and to accept constructive criticism., • Perform other related duties as assigned, for the purpose of ensuring an efficient and effective work environment., • Be familiar with and understand Atec Quality Policy and company objectives., • Understand required AS9100/ISO specific Procedures and Work Instructions., • Complete all records required by Procedures and Work Instructions., • Participate in Atec Continuous Improvement activities as appropriate., • Participate in AS9100/ISO training as required., • Cooperate with Auditors., • Four-year Bachelor of Science Electrical Engineering Technology degree (BSEET) or mechanical (BSMEET) preferred; or four (4) to eight (8) years experience with applicable Engineering Applications; or a combination of education and experience., • Computer literate in Microsoft Word, Excel, and Computer Assisted Drawing (CAD) or Auto CAD LITE., • Employee is frequently required to stand, walk, sit., use hands to handle equipment, reach with hands and arms, climb, balance, stoop, kneel, must be able to lift and/or move up to 50 pounds., • Employee is frequently exposed to moving mechanical parts, and occasionally to high precarious places and outside weather conditions., • Noise level varies depending on where employee is performing the job. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. If you need a reasonable accommodation, please contact Andrea Lopez at 281-276-2643.

Job DescriptionAbout Snaju & DartNode Snaju Inc. is a Texas-based technology firm building the infrastructure that connects ground to orbit. We operate DartNode (AS399646), a US-based hosting provider and ISP with a high-capacity backbone powered by Juniper hardware and four primary points of presence: Houston, Kansas City, Los Angeles, and Orlando. Beyond terrestrial networking, we build mission-critical software for active space operations. Our portfolio includes flight heritage on Firefly's Blue Ghost lunar mission and ongoing mission control support for the International Space Station. Both sides of the house are managed by our Global Network Operations Center (NOC) located near NASA's Johnson Space Center. Our NOC team is the heartbeat of our company, managing a global hosting footprint while simultaneously supporting live space missions. About the Role We are looking for NOC Operators to join our 24/7 Global NOC Team. At Snaju, the NOC is more than a support layer. It is a core part of our global operations. You will be deeply involved in networking, space mission support, and high-level customer interaction. We want to hire people who are genuinely excited about how the internet works, eager to help customers solve complex problems, and ready to grow with a company expanding into new frontiers. What You'll Do • Drive Global Operations: Act as a core member of the team monitoring the health of our global network, including BGP sessions, link state, and traffic patterns across our four datacenter POPs., • Support Space Missions: Monitor dashboards for active space missions and ensure mission-critical systems remain online by escalating anomalies according to documented procedures., • Empower Customers: Serve as the primary point of contact for our hosting and ISP clients, handling everything from provisioning and technical support to outage resolution., • Maintain Security: Triage and mitigate security events, including DDoS attacks and abuse reports, to keep our infrastructure and customers safe., • Coordinate & Execute: Work with datacenter remote-hands teams and internal engineers to resolve incidents quickly while ensuring detailed logs and status updates are maintained.Candidate RequirementsExperience & Skills, • 1+ years in a technical role such as IT Help Desk, MSP, Desktop Support, or NOC., • Networking Fundamentals: A solid grasp of TCP/IP, DNS, and routing. You should be comfortable reading a traceroute and understanding network paths., • Linux Basics: Comfort using the command line with tools like ssh, ping, dig, and basic file navigation., • Communication: Excellent verbal and written skills. You can explain technical issues clearly to customers and team members.Role Necessities, • U.S. Citizen or Permanent Resident: This is required for aerospace compliance., • Ability to pass a background check., • Reliable transportation to our Houston NOC located near JSC., • Commitment to a fixed, on-site shift schedule.What Stands Out, • Certifications such as CCNA, JNCIA, or Network+., • Passion Projects: If you have a home lab, run your own server, or experiment with virtualization, we want to hear about it., • Experience with monitoring tools like LibreNMS, Grafana, or Zabbix., • A background in shift-based environments such as Military, Emergency Services, or Industrial Control.Why Join Snaju?, • Real Impact: You are not just closing tickets. You are managing production BGP and supporting active lunar and orbital missions. Your work directly impacts the success of our clients and our partners in the space industry., • Built for Growth: We are a growing company and we want you to grow with us. We provide a documented progression ladder designed to move you into Network Engineering or Security roles within 18 to 24 months., • The 2-3-2 Schedule: Our 12-hour shift rotation means you work 7 days every two weeks and have every other weekend completely off from Friday through Sunday. It is a fixed schedule for either Days or Nights that offers better work-life balance than a standard 5-day week., • Collaborative Environment: Work in a modern Houston office with a full kitchen, private courtyard, and a team that values technical curiosity and peer support.Compensation & Benefits, • Pay: $20 to $29 per hour based on experience plus night shift differentials., • Health & Wellness: Medical insurance with employer contribution., • Retirement: 401(k) eligibility. Tell us about the most interesting thing you've fixed or built outside of work. Whether it is a home server, a Raspberry Pi project, a custom PC, or even a mechanical project, what were you trying to achieve, what went wrong, and how did you figure it out? We read every response. We are looking for problem solvers who are passionate about technology. Snaju Inc. is an Equal Opportunity Employer. Background checks and proof of U.S. citizenship or residency are required as a condition of employment.

Job DescriptionValve Service Technician | $65,000-$75,000 | M-F 8-5 | On-site | Direct Hire What Matters Most • Competitive Pay of $65,000-$75,000 annually, • Schedule: M-F 8AM-5PM, • Location: Houston, TX 77051, • Repair ball, gate, globe, check, and butterfly valves, as well as actuators, at the facility or customer sites., • Mechanically and electrically troubleshoot, inspect, and test valves at assigned worksites., • Perform pre-testing, disassembly, cleaning, in-process inspection, lapping, painting, assembly, testing, and final inspection on various valve types and actuators., • Complete field service reports and submit them to the job coordinator after work completion., • Understand and work with pneumatic and digital controls., • Reference valve manuals to ensure proper repair procedures are followed., • Communicate effectively with plant personnel regarding valve and instrumentation equipment and customer requirements., • Obtain site-specific and safety training required for performing valve repair services., • Maintain driver eligibility and perform regular preventative maintenance on company-owned vehicles., • Assist other team members as needed., • Perform additional duties as directed by management.Qualifications and Requirements:, • High school diploma or GED required, 2-year Associate Degree in a mechanical field preferred, • Minimum of 2 years of valve production or repair experience (FIELD SERVICE), • Ability to read blueprints and other technical diagrams, • Good communication and customer service skills, • Understanding of pneumatic and digital controls, • Ability to reference valve manuals for repair requirements, • Willingness to assist in other areas of the department as needed, • Ability to lift objects up to 50 lbs, • Must be able to stand, kneel, and walk for extended periods, • Able to work in varied operating conditions, including heat, cold, or clean room environmentsBenefits and Perks:, • $65,000-$75,000 salary, • Medical Benefits, • Holidays

Job DescriptionSalary: $20-$22 Role Profile Technical Specialist_Polatrak Deepwater Corrosion Services, Inc. Deepwater is a global leader in subsea corrosion control for all asset types, including oil and gas platforms, coastal terminals and offshore wind turbines. The company operates from facilities in the USA, the UK, Brazil, Norway and Australia. It has designed, built and installed more offshore cathodic protection systems than any other company and provides highly respected corrosion investigation and subsea inspection services. The Role The Technical Specialist - Polatrak is responsible for manufacturing of electrical instrumentation equipment for Deepwater. General manufacturing activities include: mechanical assemblies, electrical soldering/assemblies, potting, metallic mold casting, electrical testing. Familiar with sensors of various types. You will be responsible for: • Mechanical assemblies: putting together plastic and metal parts, using standard tooling (vises, screw drives, wrenches, etc.)., • Electrical assemblies: must be able to connect wiring (crimping, terminals, etc.), • Potting: Able to setup parts to be potted, safety mix potting compounds together, and pour them into a cavity at the required volume (must look clean)., • Soldering experience. Able to solder from 12 to 22 AWG wires, using 60/40 filler solder wire. Must be able to solder, wire to pins, and wire to wire., • Measure, mark, cut and label cables/wires - including able to use a cable wire meter to measure lengths., • Able to read and process Work Order and Engineering Drawings (Assembly drawings and instructions, Wiring Diagram, etc.), • Able to operate an oven to melt Zinc. Temperatures go up to approximately 800 degrees F. Then pour into a mold casting., • Able to do electrical tests - submerged water test (voltage), resistance test., • Able to troubleshoot electrical failures and know how to resolve them., • Operate warehouse equipment (e.g., forklifts, pallet jacks) as required, • Maintain cleanliness and safety standards in accordance with company policy

Job Description The Electronics Design Engineer - Space Exploration Electronic Systems will support the space program located in Houston, TX. RESPONSIBILITIES: • Report directly to the Electronics and Electrical Section Manager as part of group of over 45 other Electronics and Electrical Engineers., • Work directly with or as a team lead and associated electrical engineers on a given project., • Support new designs from conception, analysis, and manufacturing, through to operational test and deployment., • Provide design support and guidance in various aspects of electronics system development., • Be familiar with NASA specifications for electronics component development., • Develop component test stand architectures for various components., • Design and generate electrical components and lab instrumentation test system designs., • Develop and or modify LabVIEW code for various test systems., • Develop detailed test verification procedures., • Work with electrical and mechanical technicians to build and test designed systems., • Develop and test various breakout boxes and digital/analog sensor emulation systems., • Perform electrical evaluation/selection of instrumentation (pressure transducers, flow meters, pumps, fans, RTDs, Thermocouples, etc.)., • Troubleshoot and repair existing test systems., • Conduct analog and digital printed circuit board design for various application needs., • Develop test software modules to perform specific tests., • Work with eCAD designers to develop printed circuit board designs., • Work in a laboratory environment, following standard operating procedures., • Other duties as assigned. REQUIRED: This position has been posted at multiple levels (must meet minimum level indicated). Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • This position requires US Citizenship or Permanent Resident status due to the sensitivity of customer related information., • Must have a bachelor's degree in the field of engineering., • Must have 10+ years of recent and related work experience., • Prior experience leading team of electronics design engineers., • Experience in requirements definition and architecture development., • Prior experience with circuit design of analog PCB, digital PCB, and power PCB, including fabrication and assembly., • Prior experience with electrical schematic entry and printed circuit board layout tools such as Altium Designer, and version control software like Subversion (SVN)., • Prior experience in cable design and fabrication for space applications., • Prior experience with JSC standards and processes., • Prior experience with data acquisition systems (especially National Instruments) and LabVIEW code development, • Prior experience with FPGA circuitry design and coding in associated VHDL development environments (Xilinx FPGA using VIVADO tool) for space applications., • Experience in microcontroller circuit design and development of embedded systems, including hands-on design, build, and testing, as well as proficiency with embedded software development environments., • Prior experience with requirements verification. DESIRED: • Prior experience programming in C/C++ and Python., • Prior experience with circuit simulation tools such as Pspice, OrCAD, Multisim etc., • Experience with test hardware such as oscilloscopes, multi-meters, logic analyzers, function generators, electronic load banks, power supplies, power analyzers., • Familiarity with data interface protocols and associated hardware such as Ethernet, RS232, RS422, RS485, I2C, SPI etc., • Prior experience in design and test of analog instrumentation systems., • Prior experience with design and testing of analog instrumentation systems, stepper and brushless DC-DC control circuits, and of power supply and conditioning systems., • Experience in the design, development, and validation of NASA space-flight hardware., • Excellent communication skills, organizational skills and the ability to work in a multi-disciplinary team of mechanical, electrical, and software engineers designing and building world-class, NASA space-flight hardware. WORK LOCATION: • This position is located onsite and offers a 9/80 schedule with every other Friday off; some travel may be required., • Schedules are subject to change based on the requirements of the position and/or customer needs. BACKGROUND INVESTIGATIONS REQUIRED: All Bastion employees must be able to pass a national agency check and some positions require clearance and will require an extensive background verification/check process. DRUG AND ALCOHOL SCREENING REQUIRED: All Bastion employees must be able to pass a pre-employment drug screen and are required to participate in periodic random drug and alcohol screenings. STANDARD BASTION REQUIREMENTS: • Must have experience with Microsoft Office Suite, Word, Excel, PowerPoint, and TEAMS., • All of Bastion's employees must be team players with strong work ethics and must be culture oriented., • Able to communicate effectively, verbally and in written form, with internal and external customers., • Able to follow company programs, processes, procedures, practices, requirements, goals, and objectives., • Must be organized with good time management skills and must be able to work outside normal schedule and adjust schedule to meet peak periods and surge requirements., • Generally, an office environment, but can involve inside or outside work depending on the task., • Work may involve sitting or standing for extended periods (90% of the time) and may require lifting and carrying up to 25 lbs. (5% of the time)., • Regular attendance in accordance with an established work schedule is critical. BASTION BENEFITS: Bastion offers a wide range of benefits for their full-time employees; medical, prescription, dental, vision, AD&D, disability benefits, life insurance, retirement 401k, vacation, sick pay, holidays, flexible work schedules (when available), along with many other options. We also support career advancement through professional training and development. ABOUT BASTION: Bastion offers career opportunities with competitive benefits, exciting possibilities for advancement, and an exceptional work environment; the well-being of our employees is a priority, and our flexibility allows our employees a great work life balance. Our culture is based on strong business ethics, integrity, and professionalism. Our team members are known for their initiative and high-quality work. When it comes to our employees, we value, respect, and help them grow in their careers. WORKPLACE EXCELLENCE: At Bastion, we are passionate about our people and our safety culture. Individual thoughts, opinions, and perspectives bring value and help us develop solutions for challenging problems, they make us more inventive, and more resilient. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. Bastion participates in e-Verify. #MidSeniorLevel #LI-Onsite BT-26085 Job Posted by ApplicantPro

Job Description Ground Support Engineer Houston, TX About Intuitive Machines Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With the first commercial lunar landing in history, multiple NASA lunar missions in development, and additional private missions on our manifest, we pride ourselves in supporting our customers and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. About The Position As a Ground Support Engineer, you will play a critical role in the design, development, and implementation of ground support equipment (GSE) and tooling used in the integration, assembly, and testing of spaceflight hardware. The ideal candidate will have a strong background in mechanical design, proficiency in Creo, and experience developing support equipment for aerospace applications. This position offers a unique opportunity to contribute to the success of lunar and space missions by ensuring the reliability and efficiency of ground support operations. Responsibilities: • Design, develop, and implement ground support equipment (GSE) and specialized tools for spacecraft assembly, integration, and testing., • Utilize Creo to create detailed 3D CAD models, drawings, and engineering documentation., • Collaborate closely with AI&T, Systems Engineering, and Manufacturing teams to ensure equipment meets mission requirements., • Perform structural and thermal analyses of GSE components to ensure durability and safety., • Support the fabrication, assembly, and validation of designed tools and equipment., • Develop test procedures and operational instructions for GSE use in spaceflight hardware testing and handling., • Troubleshoot and optimize existing GSE designs based on test results and field performance., • Ensure compliance with aerospace industry standards, safety regulations, and company policies., • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or a related field., • 3-7 years of experience in mechanical design, with a focus on GSE, tooling, or test support equipment., • Proficiency in Creo (PTC Creo Parametric) for 3D modeling and drafting., • Experience with fabrication techniques, materials selection, and manufacturing processes., • Familiarity with aerospace assembly, integration, and testing procedures., • Knowledge of mechanical analysis techniques, including FEA (Finite Element Analysis)., • Strong problem-solving skills and ability to work in a fast-paced environment. Preferred: • Experience in spacecraft, launch vehicle, or aerospace GSE development., • Understanding of mechanisms, hydraulics, pneumatics, and electromechanical systems., • Familiarity with industry standards such as NASA, ASME, and ASTM regulations., • Hands-on experience with assembly, integration, and test operations. EEO Statement Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job Description Location: North Houston Hours: 7am-4pm Monday through Friday • Understanding of interpreting schematics of the following: general arrangement drawings, back panel layout drawings and cut-out drawings., • Strong understanding of back panel layouts and design with strong knowledge of electrical codes and communicating possible challenges back to engineering for approvals or changes., • Proficient in operating machinery and hand tools such as drill presses, circular saws, die grinders, pneumatic tools, nail guns, stud welders, hand drills, hole saws, band saws, jig-saws, grinders, cutting wheels and knock-outs., • Installation of various electronic hardware., • Knowledgeable in Panduit layout and sizing., • Proficient in mounting external hardware such as displays, switches, disconnects and lighting., • Proficient in installing and sizing glands and external connectors., • Read and follow engineering drawings, Bills of Material, and technical specifications., • Assemble, test, and service systems and components comprised of hydraulic manifolds, solenoid valves, proportional valves, hoses, metal tubing, electrical cables, electrical controllers, etc., • Perform general mechanical tasks, including as necessary basic welding, torch, grinding, etc., • Maintain records as required (assembly routers, quality, dimensional checks, testing, etc.)., • Monitor the functioning of installed equipment to detect hazards/problems and the potential need for adjustments, repairs, or replacement., • Repair and maintain machinery and mechanical equipment within the establishment such as motors, pumps, conveyors, belt fans, and air conditioners., • Dismantle, test, and analyze malfunctioning equipment, hand tools, and power tools to locate defects., • Support and participate in the organization’s continual improvement program to conform to ISO 9001 requirements by complying with the Quality Policy and procedures and meeting QMS objectives. EDUCATION AND TRAINING • High school diploma or G.E.D., • Two years of technical trade school preferred, • Experience in integration of electrical and hydraulic systems., • Experience in marine, oilfield and industrial systems., • Experience working in an ISO 9001 environment a plus., • Strong electrical design and debugging skills.