Welder jobs in California

Plant Maintenance is responsible for safe repair, maintenance of mining equipment typically found in an aggregate facility including, but not limited to cone crushers, jaw crushers, screen decks, material screws, conveyors, pumps, dust collectors, asphalt drums, bins, silos, hoppers. This individual is expected to complete pre-shift and post-shift equipment inspections, submit required daily documentation, and assist in plant operations as needed. At CalPortland, we’re proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That’s why we give you a wide range of benefits to choose from. All regular full time employees may enroll in a variety of health and welfare plans including medical, dental and vision plans. Other benefits include life insurance, disability coverage, employee assistance program, and retirement program. The company also has a variety of voluntary benefits for employees to choose from. • Perform safety/mechanical inspections of the plant and equipment, • Address any housekeeping issues within the work area, • Proper use of company provided and/or own tools to complete repair and maintenance tasks, • Able to use welder and cutting torches to repair and maintain plant equipment, • Understand all CalPortland policies and procedures, • Understand and comply with MSHA rules and regulations, • Good attendance and punctuality are a must, • Able to work irregular and extended hours and weekends to complete maintenance, repairs within the facility, • Proper use of PPE (Personal Protective Equipment) always High School Diploma/GED • Familiarity with aggregates and construction materials – sand, gravel, crushed rock, etc., • Have mining experience or other experiences including: welding, fabricating, belt splicing, and/or familiarity working around crushers, screens, sand screws, etc., • Knowledge of various aggregate plant equipment including hoppers, feeders, conveyors, screens, crushers, and track mounted screens and crushers, • Familiarity with mine site safety rules and regulations, • Ability to use various hand tools and equipment as necessary, • Ability to work outdoors in inclement weather (heat, cold, rain) for shifts up to 12 hours in length, • Able to lift 50 pounds frequently, up to 100 pounds occasionally, climb stairs/ladders, and walk on uneven or rough terrain, • Punctual and reliable, with adequate means of transportation to arrive at work when scheduled Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA regulated on-going drug and alcohol testing.

Job Description As a valued member of our team, the Yellow Iron Mechanic will be responsible for maintaining and repairing heavy construction and quarrying equipment, often referred to as “yellow iron” machinery. This includes but is not limited to excavators, loaders, dozers, skid steers, and other quarrying machinery. The mechanic ensures the machinery is in safe, working order, performs regular inspections, diagnoses issues, and carries out necessary repairs, preventive maintenance, or replacements. Safety, efficiency, and compliance with industry regulations are key aspects of this role. Starting pay is $32 - $42 per hour Benefits · Paid Holidays · Paid Vacation · Medical, Dental, Vision · 401k Retirement · $100 credit for boots after 90 days · Uniforms provided · Tool allowance when applicable · Monthly credit for cellphone use Essential Functions: • Adhere to and enforce all safety regulations and guidelines pertaining to MSHA, and OSHA., • Regularly inspect and maintain heavy construction and quarrying equipment to ensure they are in safe, working order., • Diagnose mechanical issues and carry out necessary repairs or replacements on machinery such as excavators, loaders, dozers, skid steers, and other quarrying machinery., • Perform necessary repairs and preventive maintenance to address problems promptly., • Maintain accurate records of equipment inspections, maintenance, and repairs., • Communicate effectively with team members and management about equipment status and needs., • Assist in the operation of machinery involved in the quarry and the concrete aggregate production process to ensure production continues in an efficient manner., • Read and interpret schematics and technical manuals to effectively and efficiently diagnose and repair heavy machinery. Non-Essential Duties: • Attend all Safety meetings., • Clean up work area daily., • Washes vehicles and equipment., • Performs other duties as assigned. Core Competencies: • Proficiency in diagnosing and fixing mechanical issues in heavy machinery., • Understanding of the operational principles of construction and quarrying equipment., • Knowledge of safety regulations and procedures in the industry., • Ability to troubleshoot issues and find effective solutions., • Capability of performing physically demanding tasks, including lifting heavy objects and working in various weather conditions., • Ability to effectively communicate with team members and management., • Precision in performing maintenance tasks and keeping accurate records., • Ability to work in a fast-paced environment and adapt to changing circumstances. Position Type/Expected Hours of Work This is a full-time position. General days and hours of work are Monday through Friday, hours to be determined. Not eligible for remote work. Occasional evening and weekend work may be required as job duties demand. Travel Required: Less than 10% Preferred Education and Experience • 3+ years of experience as a mechanic, especially working with heavy diesel equipment., • 3+ years of experience with yellow iron equipment, bulldozers, excavators, loaders, etc., • Working knowledge of MSHA, OSHA standards and regulations., • Experience with hand tools and power tools used in mechanical work., • Knowledge of basic tire service and repair techniques., • Experience with hydraulics., • Ability to read and interpret schematics and technical manuals., • Valid Class B and/or C license required., • Must be able to read, write and speak English. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Physical Demands and Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, hazardous chemicals and outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat and risk of electrical shock. The noise level in the work environment is usually moderate to loud. The employee is regularly exposed to wet or slippery ground conditions. Employee must wear required personal protective equipment; up to and including safety vest, hard hat, ear protection, gloves and safety glasses. The Welder must be able to work quickly and skillfully with the hands. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to finger, handle or feel and reach with hands and arms. The employee is frequently required to sit, walk, balance, stoop, kneel, crouch, crawl, talk or hear. The employee must occasionally life and/or move up to 50 pounds. This Organization Participates in E-Verify Esta Organizacion Participa en E-Verify Coast Aggregates is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Coast Aggregates es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job DescriptionDescription: Job Title: HVAC Technician Supervisor: Service Manager Hours: Full-Time, OT when needed Schedule: M-F, Rotating weekends and on call Exempt / Non Exempt : Non Exempt/hourly Salary/ Rate of Pay: $20+ DOE DUTIES AND RESPONSIBILITIES: • Inspect, repair, modify and install HVAC equipment including refrigeration and air conditioning compressors, receivers, condensers, chillers, water cooling towers, forced air converter units, pumps, automatic and hand valves, expansion valves and capillary tubes., • Conduct regular preventive maintenance inspections of refrigeration units, isolated heating and ventilating units, including boilers, gas and electrically operated air conditioning equipment, and make necessary adjustments or repairs; service and repair evaporative coolers., • Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls, safety valves, and automatic gas valves., • Operate a variety of hand and power tools, welder torch, vacuum pump, test equipment utilized in the trade and a motor vehicle; maintain equipment in effective and safe working condition; maintain parts and tool inventory., • Repair and rebuild semi-hermetic reciprocating compressors and compressors for centrifugal refrigeration machines., • Perform skilled electrical maintenance work in the repair, installation and alteration of HVAC equipment, components, timers, motors and wiring systems as needed; connect motors to control panels., • Test and examine boiler operations, observing meter and pressure gauges; conduct boiler water quality test and treatment; adjust boiler burner combustion., • Lubricate and pack heating, ventilation, refrigeration, and air-conditioning motors, pumps, fans, and other equipment., • Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of refrigeration and air conditioning systems; flush boilers, descale tubing; rebuild pressure and temperature safety valves and water pumps., • Install, rebuild, replace or repair fans, motors, thermostats, fuses, filters, bearings, valves, controls, gaskets and other equipment as necessary., • Maintain related records concerning time, labor and materials; maintain log of, • tasks performed and write reports as required., • Perform other duties as assigned., • Maintain regular attendance. KNOWLEDGE AND ABILITIES: KNOWLEDGE OF: • Standard practices of the HVAC and refrigeration trade., • Theory of HVAC and refrigeration systems., • Materials, methods and tools used in the operation and repair of HVAC and, • refrigeration systems., • Applicable building codes, ordinances and regulations of State and local, • authorities pertaining to HVAC, refrigeration and boilers., • Air compressors and pneumatic controls., • Cooling tower and boiler water treatment., • Manual and electrical tools and equipment applicable to the HVAC and, • refrigeration trade., • Welding and soldering techniques., • Health and safety regulations., • Basic record-keeping techniques., • Proper methods of storing equipment, materials and supplies. ABILITY TO: • Perform skilled mechanical maintenance duties in the inspection, repair,, • installation and alteration of District heating, ventilation, air conditioning and, • refrigeration systems and related equipment and facilities., • Calibrate systems., • Perform preventive maintenance and routine servicing of equipment., • Diagnose defects, and install, repair and maintain heating, ventilating, refrigeration,, • and air-conditioning units., • Follow oral and written instructions., • Operate specialized machinery, equipment and tools utilized in the repair,, • installation and maintenance of heating, ventilation, air conditioning and, • refrigeration systems., • Communicate effectively both orally and in writing., • Understand and follow oral and written directions., • Work cooperatively with others., • Work independently with little direction., • Meet schedules and time lines., • Maintain routine records and prepare reports., • Routinely lift objects weighing up to 75 pounds., • Lift heavy objects. PHYSICAL DEMANDS: • Work is performed while standing, sitting, and/or crouching for full shift., • Requires the ability to communicate effectively using speech, vision and hearing., • Requires the use of hands for simple grasping and fine manipulations., • Requires bending, squatting, crawling, climbing, reaching., • Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds., • Requires the ability to go up and down ladders, stairs, emergency exits etc., multiple times a day., • Requires activities involving being around moving machinery, exposure to marked changes in temperature and humidity, and exposure to dust, fumes and gases.Requirements:

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n Welder/Fabricator, Maritime\n \n \nAnduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology.\n \n \nAnduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a real-time, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n ABOUT THE TEAM\n \nAnduril's Manufacturing Technology Team is seeking a Welder/Fabricator, Maritime to join our team. The Maritime Manufacturing Technology Team is responsible for rapidly developing and implementing manufacturing materials, technologies and processes for cutting-edge defense hardware, including deployable static and moving surface, undersea and sea to air vehicles and scaling these products in our new manufacturing facilities.\n \n ABOUT THE JOB\n \nAs a Welder/Fabricator, Maritime, you will be involved with fabricating prototypes and tooling that support the manufacturing development and assembly processes. Your skill set will be utilized to drive efficient, rapid, on-time production and start-up of the new production facilities for the new maritime vehicles. The right person for this role has a wealth of experience with different materials and processes. If you are someone who wants to help develop innovative, adaptive, flexible, creative approaches to design and manufacturing and develop unified solutions for lots of stakeholders then this role is for you.\n \n WHAT YOU'LL DO\n \n \n\n • Assist in the development, innovation, and creation of the manufacturing technology team's solutions for new machining and welding processes and technologies supporting product and factory development, the future production system creation, keeping lean manufacturing principles, integrated metrology and visual management top of mind, including technologies to improve production flow while enhancing product performance, space allocation and resource requirements across programs and products.\n, • Aid in product and production system design, and facility creation to ensure the most cost- and schedule-effective solutions for our factories that meets the needs of our products.\n, • Support design, construction, fabrication, and start-up of the production systems at new factory sites, ensuring successful delivery of the factory and products off the line.\n, • Provide recommendations based on your specific skill set in processes, materials, and technologies.\n, • Collaborate with product designers, manufacturing engineering, operations, facilities and construction, and environmental safety & health to deliver creative and effective production system designs, as well as external vendors supporting the design, construction, and commissioning of new facilities\n, • Experience in machining, fabrication, prototyping, and processes.\n, • Ability to work hands-on in a manufacturing environment, next to operations and manufacturing engineering to understand and optimize the production system.\n, • Must be a U.S. Person due to required access to U.S. export-controlled information or facilities\n, • Eligible to obtain and maintain an active U.S. Secret security clearance\n\n \n \nUS Salary Range\n \n \n$68,000-$90,000 USD\n \n \nThe salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: \n \n Benefits\n \n \nAt Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you're supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.\n \n Protecting Yourself from Recruitment Scams\n \n \nAnduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.\n \n \nTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:\n \n\n • No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.\n, • Please always verify communications:\n \n, • Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.\n, • Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to [email protected].\n \n, • Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.\n, • What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to [email protected]. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.\n\n \n Data Privacy\n \n \nTo view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/. \n \n \nBy submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n Welder/Fabricator, Maritime\n \n \nAnduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology.\n \n \nAnduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a real-time, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n ABOUT THE TEAM\n \nAnduril's Manufacturing Technology Team is seeking a Welder/Fabricator, Maritime to join our team. The Maritime Manufacturing Technology Team is responsible for rapidly developing and implementing manufacturing materials, technologies and processes for cutting-edge defense hardware, including deployable static and moving surface, undersea and sea to air vehicles and scaling these products in our new manufacturing facilities.\n \n ABOUT THE JOB\n \nAs a Welder/Fabricator, Maritime, you will be involved with fabricating prototypes and tooling that support the manufacturing development and assembly processes. Your skill set will be utilized to drive efficient, rapid, on-time production and start-up of the new production facilities for the new maritime vehicles. The right person for this role has a wealth of experience with different materials and processes. If you are someone who wants to help develop innovative, adaptive, flexible, creative approaches to design and manufacturing and develop unified solutions for lots of stakeholders then this role is for you.\n \n WHAT YOU'LL DO\n \n \n\n • Assist in the development, innovation, and creation of the manufacturing technology team's solutions for new machining and welding processes and technologies supporting product and factory development, the future production system creation, keeping lean manufacturing principles, integrated metrology and visual management top of mind, including technologies to improve production flow while enhancing product performance, space allocation and resource requirements across programs and products.\n, • Aid in product and production system design, and facility creation to ensure the most cost- and schedule-effective solutions for our factories that meets the needs of our products.\n, • Support design, construction, fabrication, and start-up of the production systems at new factory sites, ensuring successful delivery of the factory and products off the line.\n, • Provide recommendations based on your specific skill set in processes, materials, and technologies.\n, • Collaborate with product designers, manufacturing engineering, operations, facilities and construction, and environmental safety & health to deliver creative and effective production system designs, as well as external vendors supporting the design, construction, and commissioning of new facilities\n, • Experience in machining, fabrication, prototyping, and processes.\n, • Ability to work hands-on in a manufacturing environment, next to operations and manufacturing engineering to understand and optimize the production system.\n, • Must be a U.S. Person due to required access to U.S. export-controlled information or facilities\n, • Eligible to obtain and maintain an active U.S. Secret security clearance\n\n \n \nUS Salary Range\n \n \n$68,000-$90,000 USD\n \n \nThe salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: \n \n Benefits\n \n \nAt Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you're supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.\n \n Protecting Yourself from Recruitment Scams\n \n \nAnduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.\n \n \nTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:\n \n\n • No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.\n, • Please always verify communications:\n \n, • Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.\n, • Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to [email protected].\n \n, • Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.\n, • What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to [email protected]. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.\n\n \n Data Privacy\n \n \nTo view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/. \n \n \nBy submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.

Consolidated Precision Products (CPP), a manufacturer of highly complex aerospace castings is seeking a Welder to join the team at our plant in the City of Industry, CA location. We are looking for a motivated and driven individual that can drive execution in a diverse, challenging environment. Salary: $25.00 - $30.00 DOE and passing CPP Weld Test. ESSENTIAL JOB FUNCTIONS/DUTIES • Ability to weld by method of GTAW for rework, repair and cosmetic upgrade in accordance with customer specifications and internal procedures., • Evaluate castings to ensure preparation from prior operation is adequate., • Assess the condition of the castings to determine weld technique., • Perform additional weld preparation with the use of die and belt grinders., • Operate and maintain welding machines and equipment., • Ability to document weld locations and dimensions. Qualifications: • Education: High School Diploma or General Education Degree (GED); Weld Test Meets AWS D17.1 with weld thickness, • Experience: Formal training or classes a plus., • Certifications/Licenses: Must successfully complete CPP ISO Procedures: Manufacturing 500, 501 and 502. Obtain and maintain NADCAP certifications on all assigned alloys (stainless steel and Aluminum)., • Other Required Knowledge, Skills & Abilities: LANGUAGE SKILLS - Ability to read, understand and comprehend documents such as safety rules, operating and maintenance instructions, simple drawings, procedure manuals and Internal Method Sheets (IMS)., • Ability to speak effectively and interact with other team members, engineers and leadership. MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to deal with problems involving several concrete variables in standardized situations. REASONING ABILITY - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a full time position Pay Range: $25.00 - $30.00

Job Description We are seeking an experienced and driven Staff Mechanical Engineer who thrives in a fast-paced startup environment. You will take ownership of the end-to-end development of mission-critical mechanical and thermal systems, from blank-page concept through analysis, fabrication, and final testing. You will tackle extreme engineering challenges, including high-temperature systems with complex power electronic interfaces while mentoring junior engineers and driving projects across the finish line. Key Responsibilities • Lead the design, analysis, and manufacturing of complex mechanical and thermal hardware., • Architect and design systems from the ground up using SolidWorks, ensuring robust application of GD&T., • Conduct advanced structural (FEA) and thermal (COMSOL) analyses on systems operating in extreme environments (up to 1500°C)., • Design custom steel and aluminum weldments, overseeing their fabrication and quality., • Architect and implement data acquisition (DAQ) systems and instrumentation to validate prototype performance., • Act as a technical authority for DFM/DFA, frequently utilizing hands-on fabrication skills (welding, machining) to iterate rapidly., • Take full ownership of project life cycles, navigating the ambiguities of a startup environment to deliver hardware on tight timelines. Basic Qualifications • Bachelor's degree in mechanical engineering., • 5+ years of professional design and/or hands-on manufacturing experience., • Prior experience in a startup or highly dynamic engineering environment. Preferred Skills and Experience • Master's degree in mechanical engineering or other comparable engineering disciplines., • Experience working with contract manufacturers., • Understanding and proper application of GD&T., • Experience with CAD (SolidWorks)., • Experience performing finite element analysis (FEA)., • Experience performing thermal analysis (COMSOL)., • Experience with steel and/or aluminum weldment design and analysis., • Experience with high-temperature (up to 1500°C) system design and analysis., • Hands-on design, design for manufacturability (DFM), and fabrication experience., • Experience with common fabrication methods and tools (welder, router, mill, lathe, hand tools, etc.)., • Data acquisition and instrumentation experience (thermocouples, pressure sensors, electrical sensors, flow sensors, oxygen sensors, etc…)., • Demonstrated ability to drive projects to completion. Compensation Range The US base salary range for this full-time position is $186,000 to $206,900 + equity + benefits. Our salary ranges are determined by role, level, and location. Within the range, individual pay is determined by additional factors, including job-related skills, experience, location, and relevant education or training. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include equity or benefits.

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n ABOUT THE TEAM\n \n \nAnduril's Maritime Manufacturing Technology Team is responsible for rapidly developing and implementing manufacturing technologies, processes, and materials for cutting-edge defense hardware. The team is developing deployable static and moving surfaces, undersea and sea to air vehicles, and scaling these products in our new manufacturing facilities.\n ABOUT THE JOB\n \n \nWe are seeking an experienced Cutting/Fabrication Technician to join the team working in a cutting-edge production environment to advance the state-of-the-possible in maritime manufacturing. You will play a key role in delivering our products to our customers by working hands-on with our engineering team on a multi-disciplinary workflow. This role will include fabricating high-quality parts in a cutting-edge production system as well as building assemblies to support the production floor.\n WHAT YOU'LL DO\n \n\n • Read and interpret technical drawings and CAD models.\n, • Program/set-up/operate CNC water jets, oxy-acetylene cutters, plasma cutters, and shears.\n, • Design/spec out and implement various work holding and fixture methods.\n, • Troubleshoot issues and make adjustments during the manufacturing process.\n, • Perform quality control both during and at completion of the manufacturing process.\n, • Help lead the organization, machine maintenance and cleanliness of the work area.\nREQUIRED QUALIFICATIONS\n \n\n • 5+ years' experience as a cutting/fabrication technician.\n, • Experience with CAD software like Siemens NX (Unigraphics).\n, • Experience with CNC water jets, oxy-acetylene, and plasma machines.\n, • Experience with manual cutting and grinding tools (hand-grinders, plasma torches, etc.).\n, • Experience with Fanuc, Omax, and Siemens controls.\n, • High level of familiarity with various alloys, metals, plastics, etc.\n, • Knowledgeable in Geometric Dimensioning and Tolerancing (GD&T).\n, • Proficient in using precision measuring tools (calipers, micrometers, protractors, tape measures).\n, • Can own the completion of an assigned manufacturing task from start to finish.\n, • Ability to flex between R&D fabrication and production tasks.\n, • Able and willing to jump in on production assembly integration tasks as needed.\n, • Ability to lift up to 50 lbs unassisted.\n, • Eligible to obtain and maintain an active U.S. Secret security clearance.\nPREFERRED QUALIFICATIONS\n \n\n • Experience working with exotic materials like Inconel, Monel, Titanium, and HY-80 up to 4-6" thick.\n, • General fabrication experience (shearing, forming, welding).\n, • Experience using CAM software.\n, • Prior work with architecture and infrastructure engineering partners and/or general contractors to build, improve or modify machining systems.\n, • Hobbyist fabricator, welder, builder.\n\n \n \nUS Hourly Range \n \n \n$37.02-$49.04 USD\n \n \nThe salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: \n \n Benefits\n \n \nAt Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you're supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.\n \n Protecting Yourself from Recruitment Scams\n \n \nAnduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.\n \n \nTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:\n \n\n • No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.\n, • Please always verify communications:\n \n, • Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.\n, • Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to [email protected].\n \n, • Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.\n, • What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to [email protected]. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.\n\n \n Data Privacy\n \n \nTo view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/. \n \n \nBy submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.

Job Description Responsabilities: -Setup new production test areas, including layouts, tooling and equipment setup, etc. · Assist with transition from development to production, including first articles · TIG welding according to engineering models, drawings, specifications and written procedures · Brazing according to ASME IX III · Interface with production leads, supervisors, manager and QA inspection to ensure timely customer delivery · Troubleshoot, diagnose, and correct discrepancies by modification, rework, repair, and/or maintenance. Perform root cause analysis and implement corrective actions for recurrence control · Setup and operate precision calibrated tools including but limited to, TIG welding machine, brazing setup, gas tanks, lines, regulators, digital and mechanical gauges, instruments etc. · Diagnose non-functional welded assemblies independently · Calibrate and test DPU assemblies per engineering procedure independently · Identify and implement continuous improvement projects for area safety and efficiency · Perform routine maintenance functions such as daily clean-up of work areas to support 6S and Lean initiatives · Learn quickly from mistakes, absorb knowledge from mentors, take ownership, cross-train others and deliver results · Other duties as assigned or otherwise beneficial to achieving organizational success Qualifications: · High School diploma or GED · D17.1 and D14.1 certifications · Experience with mechanical assembly and gauge calibration · 3-5 years direct experience in industrial manufacturing, integration, or another relevant field · Ability to work effectively with a strong work ethic and close attention to detail in a fast-paced dynamic team environment with rapidly changing roles and responsibilities · Ability to interpret engineering models, drawings, specifications, written work instructions, and test procedures · Basic mathematics skills · Hand dexterity required to assemble small mechanical or electrical components · Basic computer skills such as Windows, Microsoft Office, etc. · Strong verbal and written communication skills · Ability to climb ladders/stairs and work in small restricted areas · Ability to lift heavy items up to 44 lbs. if needed · Work off-shift, extended hours overtime, and weekends if/when necessary · Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Desired: · Industry certification, trade school training and/or degree in related field · Experienced in a team-based Lean Manufacturing environment · Bilingual (English/Spanish) Schedule · 05:00 – 13:30 with overtime and weekend hours as needed ALL APPLICANTS FOR U.S. ROLES MUST CAREFULLY READ ALL THE SUPPLEMENTAL U.S. SPECIFIC INFORMATION LISTED BELOW. SLB is committed to a culture where everyone feels like they belong. To learn more about our diversity, equity, and inclusion commitments, please visit our Diversity & Inclusion | SLB (slb.com) page for more information. When certifying your application, you are also certifying on reading and understanding all of the below supplemental information. For purposes of the application and the below information, Company shall be defined to mean SLB. Please note that the below supplemental information and the employment application are NOT a contract. \nCompany Description In July 2024, WestRock and Smurfit Kappa merged to become Smurfit Westrock, a global leader in sustainable packaging. Smurfit Westrock operates in 40 countries with 500+ production facilities worldwide and 100,000+ team members. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts, using leading science and technology to drive innovation in packaging. As a trusted partner to companies across the world, Smurfit Westrock is dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges.

Job DescriptionJob Summary The Shop Quality Supervisor plans, directs, performs, and supervises company quality control functions and activities. Essential Functions • Actively support the Company’s commitment to safety and its “Core Values.”, • Represents the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”, • Provides specialized technical expertise in support of the Quality program, including specialized inspection and testing techniques, quality training, statistical methods, audits, quality tools for problem solving and assessment., • Perform and report on NDE inspections and testing activities., • Coordinate 3rd party inspections and review reports for accuracy and compliance with project requirements., • Prepare, organize, and submit weld maps, record drawings, and final turnover packages., • Plan, conduct, and document Welder Performance Qualification Testing., • Maintain shop at an “Audit Ready” condition at all times for certification programs, including ASME and AISC., • Maintain NCR site and associated activities to provide accurate data to management., • Act as liaison for customer inspectors or customer representatives that visit the shop location., • Apply knowledge of quality systems and tools to validate and verify contractually required standards for project execution., • Maintain presence on shop floor and address quality and safety issues., • Manage measuring and test equipment calibration activities and storage., • Perform Quality training to shop personnel, as needed., • Responsible for maintaining quality standard of products and the procedures and materials that go into work scope. Aligns quality management function with the performance needs of product lines., • Actively participate in issue resolution and continuous improvement activities., • Establishes priorities for the completion of assigned tasks. Uses judgment to interpret internal and external issues and develop best practices. May direct resources, prioritize tasks, and provide guidance to less experienced team members., • Relies upon experience, interpersonal skills, and broad knowledge of field to ensure task completion in compliance with policies, procedures, and business strategy., • Perform other duties, as assigned.Qualifications, • AWS Certified Welding Inspector (CWI) is required., • LA City Dept of Building and Safety “Quality Control Inspector” certification is preferred., • 5+ years related experience in QA/QC., • Current certification in a related discipline specific inspection process (e.g. ASNT Level II, NACE etc.) preferred., • Thorough working knowledge of regulatory agency quality assurance and quality control activities., • Experience must have been in steel fabrication. ., • Proven ability to supervise personnel and excellent verbal and written communication skills required., • Advance degree or training is desirable., • Strong oral, written, and interpersonal communication skills., • Must be proficient in computer skills including use of Microsoft Office products. California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range. Hiring range: $35.00 per hour to $44.00 per hour Follow us at Matrix Service Company to view all of our open positions and for the latest news about our operating companies and our teams. In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance. Some employees may also be eligible for paid time off, tuition reimbursement and a performance or safety bonus program. At Matrix, we are dedicated to building a culture of engagement, respect, collaboration and teamwork. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets Employer We are an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category. Applicants must be currently authorized to work in the United States on a full-time basis.

We are seeking an experienced TIG & Laser Welder to join a production team in El Monte, CA.

We are seeking an experienced TIG & Laser Welder to join a production team in El Monte, CA.

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n ABOUT THE TEAM\n \n \nAnduril's Maritime Manufacturing Technology Team is responsible for rapidly developing and implementing manufacturing technologies, processes, and materials for cutting-edge defense hardware. The team is developing deployable static and moving surfaces, undersea and sea to air vehicles, and scaling these products in our new manufacturing facilities.\n ABOUT THE JOB\n \n \nWe are seeking an experienced Cutting/Fabrication Technician to join the team working in a cutting-edge production environment to advance the state-of-the-possible in maritime manufacturing. You will play a key role in delivering our products to our customers by working hands-on with our engineering team on a multi-disciplinary workflow. This role will include fabricating high-quality parts in a cutting-edge production system as well as building assemblies to support the production floor.\n WHAT YOU'LL DO\n \n\n • Read and interpret technical drawings and CAD models.\n, • Program/set-up/operate CNC water jets, oxy-acetylene cutters, plasma cutters, and shears.\n, • Design/spec out and implement various work holding and fixture methods.\n, • Troubleshoot issues and make adjustments during the manufacturing process.\n, • Perform quality control both during and at completion of the manufacturing process.\n, • Help lead the organization, machine maintenance and cleanliness of the work area.\nREQUIRED QUALIFICATIONS\n \n\n • 5+ years' experience as a cutting/fabrication technician.\n, • Experience with CAD software like Siemens NX (Unigraphics).\n, • Experience with CNC water jets, oxy-acetylene, and plasma machines.\n, • Experience with manual cutting and grinding tools (hand-grinders, plasma torches, etc.).\n, • Experience with Fanuc, Omax, and Siemens controls.\n, • High level of familiarity with various alloys, metals, plastics, etc.\n, • Knowledgeable in Geometric Dimensioning and Tolerancing (GD&T).\n, • Proficient in using precision measuring tools (calipers, micrometers, protractors, tape measures).\n, • Can own the completion of an assigned manufacturing task from start to finish.\n, • Ability to flex between R&D fabrication and production tasks.\n, • Able and willing to jump in on production assembly integration tasks as needed.\n, • Ability to lift up to 50 lbs unassisted.\n, • Eligible to obtain and maintain an active U.S. Secret security clearance.\nPREFERRED QUALIFICATIONS\n \n\n • Experience working with exotic materials like Inconel, Monel, Titanium, and HY-80 up to 4-6" thick.\n, • General fabrication experience (shearing, forming, welding).\n, • Experience using CAM software.\n, • Prior work with architecture and infrastructure engineering partners and/or general contractors to build, improve or modify machining systems.\n, • Hobbyist fabricator, welder, builder.\n\n \n \nUS Hourly Range \n \n \n$37.02-$49.04 USD\n \n \nThe salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: \n \n Benefits\n \n \nAt Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you're supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.\n \n Protecting Yourself from Recruitment Scams\n \n \nAnduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.\n \n \nTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:\n \n\n • No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.\n, • Please always verify communications:\n \n, • Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.\n, • Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to [email protected].\n \n, • Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.\n, • What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to [email protected]. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.\n\n \n Data Privacy\n \n \nTo view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/. \n \n \nBy submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.

Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers. If you have the required skill set, education requirements, and experience, please follow the next steps. This role is "On-Site" at the location detailed in the job post. Salary Range: $27.04 To $50.27 Hourly Propulsion Controls Engineering has multiple positions open for Welder Journeyman, with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation. Job Summary / Welder Journeyman: Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without supervision. Basic knowledge of fittings preferred. Performs other related tasks as assigned.

Job Description Labor One is hiring Firewatch for a shipyard in San Diego, California. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 • Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Summary • Observes for sparks and flames during welding and works as a laborer to assist trades; sweeps, hoses and performs tasks related to clean up on-board ship, in drydock, on piers and throughout the shipyard., • Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards • High school graduate or GED with prior experience preferred., • Ability to read and write (in English) and understand verbal instructions required., • Requires observation skills, ability to respond quickly, housekeeping skills, good judgement and on-going safety awareness., • Must be able to access and move around ship safely, work at heights and in confined areas with limited visibility., • Must be clean shaven for respirator fit (modest mustache is fine). Essential Job Tasks • Assists in setting up equipment, including helping the welder running leads, hoses, operation of air an electric power tools; moves metal pieces for re-fitting; removes scrap from work area., • Moves fire bottle to areas of work; observes for sparks from welding and grinding;extinguishes fire when necessary., • Maintains a clean, hazard-free work area., • Sorts, inspects and stacks lumber and metal scaffold components. Materials, Tools Equipment, Work Aids Fire retardant material, hoses, leads, cleaning equipment and supplies, lights, fire bottle. Metal, wood, scaffold sub-section, bolts, clips, hand tools, cable lines and rope lines. Physical/Mental Involvement Lifting/carrying of objects weighing up to 50 lbs.; standing, walking, climbing/balancing, pushing/pulling, kneeling, crawling, stooping, crouching, reaching, handling, fingering, eye/hand/foot coordination, seeing, hearing and speaking. Understanding written and verbal directions, recognizing and avoiding potential safety hazards, following established procedures. Marginal Job Tasks None identified. Environmental Factors Works 50% of the time inside, 50% outside, on board ship, drydock, balanced on scaffolding in shipyard. Exposed to wind, heat, constant wet and humid conditions, vibrations; works near constantly moving machinery, mechanical parts and traffic from other trades. Exposed to fumes, odors, dust, toxic or caustic chemicals. Exposed to constant loud machinery noise. Labor One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Firewatch for a shipyard in San Diego, California. Please contact our team for more information! Cell: (619)657-5507 , (858)717-1672, or (619)484-7267 • Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Summary • Observes for sparks and flames during welding and works as a laborer to assist trades; sweeps, hoses and performs tasks related to clean up on-board ship, in drydock, on piers and throughout the shipyard., • Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards • High school graduate or GED with prior experience preferred., • Ability to read and write (in English) and understand verbal instructions required., • Requires observation skills, ability to respond quickly, housekeeping skills, good judgement and on-going safety awareness., • Must be able to access and move around ship safely, work at heights and in confined areas with limited visibility., • Must be clean shaven for respirator fit (modest mustache is fine). Essential Job Tasks • Assists in setting up equipment, including helping the welder running leads, hoses, operation of air an electric power tools; moves metal pieces for re-fitting; removes scrap from work area., • Moves fire bottle to areas of work; observes for sparks from welding and grinding;extinguishes fire when necessary., • Maintains a clean, hazard-free work area., • Sorts, inspects and stacks lumber and metal scaffold components. Materials, Tools Equipment, Work Aids Fire retardant material, hoses, leads, cleaning equipment and supplies, lights, fire bottle. Metal, wood, scaffold sub-section, bolts, clips, hand tools, cable lines and rope lines. Physical/Mental Involvement Lifting/carrying of objects weighing up to 50 lbs.; standing, walking, climbing/balancing, pushing/pulling, kneeling, crawling, stooping, crouching, reaching, handling, fingering, eye/hand/foot coordination, seeing, hearing and speaking. Understanding written and verbal directions, recognizing and avoiding potential safety hazards, following established procedures. Marginal Job Tasks None identified. Environmental Factors Works 50% of the time inside, 50% outside, on board ship, drydock, balanced on scaffolding in shipyard. Exposed to wind, heat, constant wet and humid conditions, vibrations; works near constantly moving machinery, mechanical parts and traffic from other trades. Exposed to fumes, odors, dust, toxic or caustic chemicals. Exposed to constant loud machinery noise. Labor One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Location: San Diego, CA, US, 92113 National Steel and Shipbuilding Com Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Welders shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks as assigned, some of which may become essential to the position. Previous experience or training is required. Must be able to qualify in two gas shielded FCAW welding processes 71T-1 and 811N3 in the three positions. Knowledge of welding characteristics of metal. Must be able to work at heights, confined spaces, and any assigned shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. • Welds parts in position for fabrication of vessels, tanks or other structural assemblies., • Uses carbon electrodes to cut, shape and groove metal., • May prepare workplace for welding by cleaning and/or preheating., • Examines weld sizes of weld beads., • Cleans weld area; sweeps and removes scrap., • Other job duties as may be assigned relevant to the trade. Welding machinery, hand tools, high reach equipment and semi auto equipment. Personal protective equipment required. Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. PAY SCALE $33.76 - $37.11 This pay range is a reasonable estimate of the hourly range for this role. It takes into account the wide range of factors considered in making compensation decisions; including but not limited to skill sets, experience, training, and education. General Dynamics NASSCO also provides a variety of benefits including medical & dental insurance coverage, 401(k) retirement savings plan, flexible spending accounts/HSAs, life and disability insurance, company paid holidays and paid time off (PTO), wellness coaching, and an onsite health services. General Dynamics NASSCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Date: Jul 29, 2026 Location: San Diego, CA, US, 92113 Company: National Steel and Shipbuilding Com Job Summary: Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks as assigned, some of which may become essential to the position. Qualifications Standards: Previous experience or training is required. Must be able to qualify in two gas shielded FCAW welding processes 71T-1 and 811N3 in the three positions. Knowledge of welding characteristics of metal. Must be able to work at heights, confined spaces, and any assigned shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Essential Job Tasks: • Welds parts in position for fabrication of vessels, tanks or other structural assemblies., • Uses carbon electrodes to cut, shape and groove metal., • May prepare workplace for welding by cleaning and/or preheating., • Examines weld sizes of weld beads., • Cleans weld area; sweeps and removes scrap., • Other job duties as may be assigned relevant to the trade. Materials, Tools, Equipment, Work Aids: Welding machinery, hand tools, high reach equipment and semi auto equipment. Personal protective equipment required. Physical/Mental Involvement: Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. Marginal Job Tasks: General housekeeping in work areas. May be required to attend safety, quality and/or process improvement meetings. Environmental Factors: Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. PAY SCALE $33.76 - $37.11 This pay range is a reasonable estimate of the hourly range for this role. It takes into account the wide range of factors considered in making compensation decisions; including but not limited to skill sets, experience, training, and education. General Dynamics NASSCO also provides a variety of benefits including medical & dental insurance coverage, 401(k) retirement savings plan, flexible spending accounts/HSAs, life and disability insurance, company paid holidays and paid time off (PTO), wellness coaching, and an onsite health services. General Dynamics NASSCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Structures Welder Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. This announcement will be used to establish an eligibility list of qualified candidates. Are you a skilled welder looking for meaningful, hands-on work that keeps the community moving? This opportunity allows skilled professionals to apply their craft where it truly matters—maintaining and strengthening the infrastructure behind one of the nation's leading transit systems. The incumbent will be apart of a highly skilled team responsible for performing high-quality field welding and fabrication across District facilities and wayside structures. Under general supervision, Structures Welders independently perform a full range of welding techniques, including arc, MIG, TIG, and gas welding, on key structural components such as platforms, stairways, gates, grating, and other critical infrastructure. The position offers technically challenging and rewarding work, including preparing and fabricating materials for repair, interpreting blueprints and welding symbols, selecting the appropriate tools for each assignment, and completing welding work in a variety of field conditions. Duties may also include operating high-rail vehicles, cranes, and rigging equipment, as well as performing repairs in elevated or confined spaces, providing variety and opportunities for continuous skill development. Successful candidates will possess a strong technical welding background, a dedication to safety, and the ability to work both independently and as part of a collaborative crew. Flexibility is key, as this position supports varied shifts, including nights and weekends, as well as emergency response situations essential to keeping the system operating reliably. The most qualified candidates for this position will have highly developed competencies beyond the minimum qualifications in the following areas, which will be reinforced with related work experience and clearly articulated during the selection process: • Performing precision field welding across a variety of metals (steel, stainless steel, aluminum, etc.), • Reading and interpreting blueprints, schematics, and welding symbols, • Fabricating and repairing structural components in field conditions, • Safely operating tools, equipment, and vehicles used in welding operations, • Applying safety standards and properly using protective equipment, • Problem-solving and adapting to changing field conditions, • Maintaining accurate records of work performed, • Working effectively both independently and within a team This is a SEIU Local 1021 Bargaining unit position. All full-time SEIU District employees must follow the "Bid Form" process and deposit their bids in the bid box. Failure to comply may invalidate the employee's bid. As actual vacancies occur, District employees on the internal eligibility list will be considered before external candidates. All EXTERNAL and current non-SEIU applicants must apply online at www.bart.gov/jobs. Applications must be completed in full and include all requested information, including dates of employment, positions held, hours worked, and a detailed description of duties performed. Applicants may attach a resume to their application or bid form to provide supplemental information; however, the resume does not substitute for completing the application or bid form in its entirety. Only information included on the application and bid form and resume at the time of submission will be used to determine whether applicants meet the minimum qualifications for the position. All application and bid form materials must be submitted by the closing date and time listed on the job announcement. Applications and bid forms received after the closing deadline will not be considered. The selection process for this position may include one or more of the following: a skills or performance demonstration, written examination, and/or panel or individual interview. External applicants will not be considered until all employees who have applied have been considered first. All applications and bid forms will be reviewed by the Talent Acquisition Division to determine whether applicants meet the established Minimum Qualifications (MQs). Applicants who meet the MQs may be referred to the hiring department for further evaluation as part of the selection process. The selected candidate must demonstrate a work history reflecting reliability and dependability and may be required to provide copies of certificates, diplomas, or other documentation required by law, including proof of authorization to work in the United States, and pass a pre-employment medical examination which includes a drug screen, which is specific to the essential job functions and requirements. Pre-employment processing will also include a background check. This requirement does not apply to current full-time District employees unless the position requires additional evaluations or clearances. • Performs precision arc, MIG, TIG and gas welding on such structural elements as grating, doors, stairs, gates, and platforms, which include steel, stainless steel, iron, aluminum, and sheet metal welding., • Reads diagrams and prints and discusses work to be performed with the supervisor or foreworker., • Determines necessary approach, tools and equipment and loads them on a vehicle for transportation on the work site., • Operates a high-rail vehicle to reach the job location., • Prepares surfaces to be welded by cutting, chipping, shaping and sanding., • Uses a micrometer and other measuring devices to determine measurements., • Roughs out and fabricates appropriate parts to effect repairs., • Adjusts and uses welding, brazing and soldering equipment., • Grinds, smoothes and finishes welding surfaces., • Performs shop work as required to fabricate repair parts for field placement., • Performs specialized welding as required on vehicles, pressurized pipes, and other surfaces to effect repair; may work from scaffolds to accomplish required welding., • Sets up rigging to move heavy objects in preparation for welding., • Uses an overhead or mobile crane, forklift and other equipment and vehicles as required to complete work., • Cleans sumps, digs trenches, and otherwise exposed areas to be welded., • Completes records of work performed and materials used., • Reports the need for additional maintenance to the foreworker., • Maintains a supply of welding gasses, rods, tools and safety equipment and notifies supervisor of the need for replacements as needed. Completion of an apprenticeship in welding and one year of experience in combination welding. Heavy rail welding and repair experience are desirable. Other Requirements: Must possess and maintain a valid California Class A driver's license and have a satisfactory driving record. Must be able to obtain and maintain District certification for the operation of high-rail vehicles. Must be able to lift and carry equipment weighing up to 50 pounds and have sufficient mobility to walk, climb and stoop to perform work. Must be willing to work off hours shifts. Knowledge of : • Methods and techniques of arc, gas, MIG and TIG welding, particularly as applied to field situations., • Types of welding rods and materials and their applications. Types of welding gasses and mixtures., • Storage and handling requirements of various types of welding rods., • Safety practices pertaining to the work, including the use of eye, respiratory and hand protection. Skill in : • Performing field welding of steel, iron, aluminum and other metals., • Preparing surfaces to achieve effective welds., • Grinding, smoothing and finishing welded surfaces., • Treating and tempering metals., • Fabricating parts to effect field welding repairs., • Using precision measuring devices accurately., • Reading and interpreting diagrams, blueprints, written instructions and welding symbols. Working independently or in a crew situation., • Keeping basic written records of work performed. The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights • Medical Coverage (or $350/month if opted out), • Dental Coverage, • Vision Insurance (Basic and Enhanced Plans Available)

We're looking for a motivated and dependable Entry-Level Welder to join our team! This is a great opportunity for someone who is beginning a career in welding and fabrication and wants to build hands-on skills in a supportive, team-oriented environment. In this role, you'll work alongside experienced welders and receive on-the-job training while learning and developing your welding, fabrication, and shop skills. If you're safety-minded, detail-oriented, and eager to learn, we'd love to hear from you. • Perform basic MIG, TIG, or Stick welding under the guidance of experienced welders., • Read and follow simple blueprints, drawings, and work instructions., • Measure, cut, grind, clean, and prepare metal materials for fabrication., • Safely operate welding equipment, hand tools, and power tools., • Inspect completed welds and finished work for quality and accuracy., • Assist experienced welders with fabrication, assembly, and repair projects., • Keep your work area clean, organized, and safe., • Follow all company safety policies and properly use required PPE., • Report equipment problems, material defects, or safety concerns to a supervisor., • High school diploma or GED preferred., • Basic knowledge of welding techniques and common shop tools., • Ability to use measuring tools such as tape measures and calipers., • Strong attention to detail and a willingness to learn., • Good communication and teamwork skills., • Ability to lift up to 50 pounds and stand for extended periods., • Welding certification or vocational training is a plus, but not required., • Familiarity with MIG, TIG, or Stick welding., • Basic blueprint or drawing reading., • Mechanical aptitude and hands-on problem-solving skills., • Ability to work effectively in a fast-paced manufacturing, fabrication, or construction environment. This position is performed in a manufacturing, fabrication, or construction setting. You may be exposed to heat, sparks, welding fumes, dust, and loud noise. Proper safety equipment is required, including a welding helmet, gloves, and steel-toe boots. We're committed to helping entry-level team members develop their skills and build a rewarding career in the welding and fabrication industry. You'll have the opportunity to learn from experienced professionals, gain valuable hands-on experience, and grow with the team. • 401(k), • Health insurance, • Vision insurance, • On-the-job training and career development opportunities Work Location: In person

Pay Rate. SEIU Maintenance Worker III - Hourly rate: $43.57 (Step 76) - $56.96 (Step 99)External candidates will start at Step 76 Reports To. Variable. Days Off. Variable. Who May Apply. All future BART Employees. Current Assignment. This announcemen Welder, External, Welding, Transportation, Business Services

BlueWave is hiring a Welder & Fabrication Technician for an aerospace client based in Long Beach, California. As Welder & Fabrication Technician, you will fabricate and weld production tooling using flux-cored arc welding processes. You will prepare Technician, Welder, Fabrication, 1st Shift, Staffing, Shift, Manufacturing

AM Shift: Monday - Thursday 5:00 AM - 3:30 PM Pay: $25.00 - $30.00 an hour depending on experience. Safety Integrity Customer Focus Respect & Trust Accountability Excellence. As a TIG Welder you will:The TIG Welder will prepare, tack weld a Welder, Manufacturing, Welding

Fabricator / Welder (Torrance, CA) The Porsche 911 Restored - Reimagined - Reborn Singer Vehicle Design is a US-based advanced design and fabrication company founded by Chairman and Chief Creative Officer, Rob Dickinson. Since 2008, the boutique rest Fabricator, Welder, Design, Vehicle, Manufacturing, Staffing, Fabrication

At Flex, we welcome people of all backgrounds. Our employees thrive here by living our values: we support each other as we strive to find a better way, we move fast with discipline and purpose, and we do the right thing always. Through a respectful, Welder, Structural, 2nd Shift, Production Manager, Welding, Sheet Metal, Manufacturing, Retail

Location 17100 N Perris Blvd, Moreno Valley, CA, 92551, United States Job Category Manufacturing Industry Automotive Employee Type Non-Exempt Description

Vast is developing next-generation space stations and space infrastructure using an incremental, hardware-rich, and low-cost approach. Vast is rapidly developing its multi-module Haven Station to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. Haven Demo's 2025 success made Vast the only operational commercial space station company to fly and operate its own spacecraft. Next, Haven-1 is expected to become the world's first commercial space station when it launches in 2027, followed by additional Haven modules. Additionally, the company recently announced Vast Satellite, a high-power satellite product line leveraging its space station components and the heritage of Haven Demo. Headquartered in Long Beach, California, and with more than 1,000 employees and over a billion dollars in private capital, Vast has built the facilities required to manufacture and operate America's next space station. The company plans to develop future habitats and systems for the Moon and Mars, dedicated space stations for government partners, and other crewed systems that will unlock the expanding long-term space economy. Vast is looking for a Welder and Fabrication Technician III, reporting to the Production Manager of Structures Manufacturing, to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations. This will be a full-time, non-exempt position located in our Long Beach location. Responsibilities: • Weld the Haven Structure for Human spaceflight, • Operate mechanized and robotic welding equipment, • Ability to quickly fabricate, weld tooling to support Haven., • Inspect fabricated parts for geometry acceptance and weld conformance, • Fit, form parts, and clean parts as required and setup welding equipment in preparation for welding, • Perform Class A quality Aluminum weld, • Diagnose weld defects and suggest corrective actions, both in repair and process optimization, • Work with Engineering to improve tools and problem solve, • Material handling of raw goods and finished weldments, • Experience with a wide variety of metal fabrication equipment such as vertical bandsaw, Sanding equipment, Capability to efficiently set up jig tables. Minimum Qualifications: • 4+ years of experience with Class A TIG, • 4+ years of experience with fabrication, and forming experience Preferred Skills & Experience: • Self-starter, highly motivated working in a fast-paced department, • Automated/robotic welding experience Preferred VPPAW, • 5+ or more years with Class A aerospace welding, • Ability to follow written and verbal instruction, • Familiar working with x-ray technicians and other NDT techniques, • Experience reading engineering blueprints Additional Requirements: • Ability to travel up to 10% of the time, • Willingness to work evenings and/or weekends to support critical mission milestones, • Ability to lift up to 50 lbs unassisted Pay Range: California $34.44 - $48.89 USD COMPENSATION AND BENEFITS Base salary will vary depending on job-related knowledge, education, skills, experience, business needs, and market demand. Salary is just one component of our comprehensive compensation package. Full-time employees also receive company equity, as well as access to a full suite of compelling benefits and perks, including: medical, dental, and vision coverage for employees and dependents, generous paid time off; up to 20+ days of vacation for exempt staff and up to 10+ days of vacation for non-exempt staff with the ability to cash-out unused vacation annually, paid parental leave, short and long-term disability insurance, life insurance, access to a 401(k) retirement plan, ClassPass credits, personalized mental healthcare through Spring Health, and other discounts and perks. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast's ongoing commitment to providing high-quality meals for employees. U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a "U.S. person" as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. This status includes U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Vast is an Equal Opportunity Employer; employment with Vast is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

We have a strong custom metal department, and we are looking to expand. We are willing to train and mentor anyone qualified for the position. Our ideal Metal Welder and Fabricator Candidate: • 3 years of metalwork experience, • Proficiency in TIG and MIG welding skills, • Bonus points for expertise in welding brass and copper, • Extensive knowledge in fabrication processes, • Experience welding aluminum, stainless steel and steel, • Ability to communicate effectively with supervisors, discussing challenges and collaboratively brainstorming solutions to enhance productivity Benefits: • 401(k), • Health insurance Schedule: • 8+ hour shift with overtime Work setting: • In-person Ability to commute/relocate: • Santa Ana, 92705: Reliably commute or planning to relocate before starting work (Required) Salary: $25-$35/ hour depending on experience We look forward to meeting you to see if you'd be the right fit here! THIS IS AN ONSITE POSITION. No agencies and local candidates only. Due to the high volume of candidates, we are unable to respond to all inquiries.

Objective Of Job Maintain and repair small engine tools, on-road passenger vehicles and semi-trucks, and off-road heavy equipment. Small tools include but not are not limited to includes generators, light towers, arrow boards, water buffalos, saws, pressure washers, brooms, tack pots, air compressors, pumps, jackhammers, vibratory plates, jumping jacks, lasers, screens, etc. On-road fleet includes but is not limited to pickups by Ford, RAM, and GMC, Peterbilt water trucks, tractors, and 10-wheelers, Ford water trucks, Wester Star Fuel & Lube trucks, International water trucks and tractors, trailers by Haulmark, Texas Bragg, Walton, Carson, Big Tex, Dargo, Transport trailers by ASVE, Murray, Cozad, Alcom, and Wells Cargo. Off-road equipment fleet includes but is not limited to CAT skid steers, skip loaders, loaders, excavators, motor graders, paver, rollers, and compactors, John Deere backhoes and skip loaders, Ingersoll-Rand rollers, Bomag rollers, Volvo excavators and rollers, Cedarrapids pickup machine, and Bomag rollers. Essential Functions • Mechanic – Perform quality maintenance, diagnosis, disassembly, inspections, repairs, rebuilds, and reassembly on any brand of components or equipment (i.e., engines, power trains, hydraulics, fuel systems, power generation, electrical codes, etc.). To include failure analysis as required., • Maintenance - Performs scheduled and routine maintenance; reviews repair request list, assembles tools and equipment, walks or drives to the appropriate site; records parts numbers and measurements, as needed., • Repairs - Reviews repair request list; uses hand tools and power tools to repair or remove and replace components, such as engines, power trains, hydraulics, fuel systems and electrical systems. Helps troubleshoot and identify the causes and extent of repairs needed., • Cutting & Welding - Measures, cuts, and welds metal to fabricate in the repair and installation of machinery, • Cleaning – Keeps work area, shop, and truck (if assigned a truck) well organized and clean., • Operates pressure hose to clean off equipment., • Loading/ Unloading - Manually loads and unloads tools and supplies, including gas cylinders, pipe, metal and parts; uses lift or hoist for heavier items; may use equipment to unload incoming trucks of supplies., • Equipment operator – includes operating equipment for the purpose of mining, stockpiling, cleaning, repairing, dust control, and maintenance in the plant site., • Laborer – includes shoveling, sweeping, operating equipment, washing, and maintaining the cleanliness of the plant site and work area., • Miscellaneous – Works to improve profitability by controlling costs, increasing efficiencies, and exploring feasible opportunities. Completes all paperwork, parts ordering, or electronic data entry in an accurate and timely manner., • Includes other various tasks your supervisor may ask of you pertaining to the operation and maintenance of the facility. Equipment Used In Performance Of The Job Wheel Loader, Excavator, Utility Truck, Tractor, Skid Steer, Dozer, Haul Truck, Water Truck, Welder, Torch, Hand Tools, Computer and CB Radio. Desired Qualifications Cutting, torching, grinding, welding, rigging, use of hand tools, ability to work in a team environment safely and productively. Performs responsibilities with minimum supervision. Communicates effectively with other employees and supervisor. Work Environment Shop and jobsites may contain dust, fumes, debris, low to loud levels of noise and extreme weather conditions including excessive heat or cold and rain prevalent at times. Physical Demands Employees may experience the following physical demands for extended periods of time: shoveling, lifting up to 50 pounds, sitting or standing for various lengths of time, and climbing of stairs. Base Salary Range:$27.00/hr - $39.00/hr The range displayed reflects the range the company reasonable expects to pay for the position. The actual base salary is subject to variation due to the role, level, geographic location, relevant education, training, or experience, among other factors. Employer Disclosure Statement The above statements and job description is intended to describe the nature and level of work being performed within this job. They are not intended to be an exhaustive list of all responsibilities, duties, and tasks. Other similar or additional duties are performed as assigned. Equal Opportunity Employer Teichert and its subsidiaries pride themselves on being an Equal Opportunity Employer. Individuals seeking employment at our company are considered without regards to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws.

Benefits: 401(k), 401(k) matching, opportunity for advancement, training & development Job Summary • Support other personnel as required, including (but not limited to): cutting, grinding, cleaning, tacking, etc., • Lifting 50lb., • General power tool knowledge (angle grinders, drills, band saw, cold saw)., • Welding (MIG 0.035, Flux Core, Dual Shield 0.045)., • Loading and unloading trucks., • Basic knowledge on how to read a measuring tape., • 8-hour shift Monday to Friday., • Material stock check (shipping & receiving)., • Steel profiles & processes knowledge., • Forklift certification preferred., • Operating overhead crane & rigging., • Handles paperwork accurately and acquires all signatures per process. Education • Minimum education requirement: High School diploma or equivalent., • Must have a basic understanding of standard power tools and possess the ability to read / follow simple instructions., • Lift heavy objects up to 50 pounds., • Work in confined spaces, • Experience in structural steel environment (preferred). Compensation: $20.00 - $22.00 per hour

Job DescriptionNorchem CorporationPosition Overview Norchem is seeking a dependable, mechanically inclined Manufacturing Trainee to join our automated systems manufacturing team. This entry-level position combines daily shop support with hands-on training in metal fabrication, welding, and electrical control panel assembly for engineered water systems. This individual will eventually develop into a Stainless Steel Welder/Fabricator or Electrical Panel Builder, based on demonstrated skills, interests, and company needs. You will work alongside experienced shop personnel, learning safe work practices, quality standards, and the technical skills needed to take on increasingly independent work. Location: Bell Gardens, CA Schedule: Monday-Friday, 6:00 AM to 2:30 PM (overtime eligible as needed). Benefits Include: • Medical, Dental Vision and Life Insurance (94–100% of employee premiums covered on select plans), • 401(k) pre-tax/ROTH plans with Employer Safe Harbor Match, • PTO and STO, • Federal Holidays, • Company Work Uniforms, • Expense reimbursement for work bootsWhat You'll Do, • Support fabricators and panel builders by preparing materials, staging components, and keeping tools and work areas organized., • Measure, mark, cut, drill, grind, and deburr metal under supervision., • Learn weld prep, fit-up, finishing, and welding techniques through hands-on instruction and practice., • Help assemble control panels: mount components, install wire duct and DIN rail, prepare labels, and route and terminate wires as your training progresses., • Learn to read shop drawings, electrical schematics, bills of materials, and assembly instructions., • Help with mechanical assembly of equipment, frames, enclosures, and related components., • Receive, identify, organize, and track materials and parts, and flag shortages or discrepancies., • Check your work for accuracy and quality, and report defects or mistakes right away., • Keep the shop clean and organized, wear required PPE, and operate equipment safely., • Perform only tasks you've been trained and authorized for. Electrical testing and energized work stay with qualified personnel.What You Bring, • Interest in building a career in welding, metal fabrication, or electrical panel assembly, • Mechanical aptitude and comfort with hand tools, • Basic math skills and the ability to measure accurately, • Strong attention to detail and reliable attendance, • Willingness to follow instructions, take feedback, and ask questions, • Ability to work well as part of a team, • Ability to stand, bend, and handle materials throughout the shift, with reasonable accommodation as needed Helpful but not required: previous shop experience, trade school coursework, or exposure to welding, automotive repair, construction, or electrical work. Training and Career Development Training starts with shop safety, tool use, material preparation, and basic assembly. As your skills develop, you'll take on more technical work in both fabrication and panel building. From here, you can grow into one of two roles: • Metal Fabricator: drawing interpretation, material layout, cutting, fit-up, welding, finishing, and dimensional inspection., • Electrical Panel Builder: schematic interpretation, component layout and mounting, wire preparation and termination, labeling, and assembly quality checks. Advancement depends on safe work habits, reliability, workmanship, demonstrated skill, and available opportunities. What Success Looks Like You help keep the shop prepared and productive, complete your work carefully, and keep building new skills. Over time, you handle defined fabrication or panel assembly tasks with less supervision while keeping quality and safety consistent. By submitting this application, I understand and consent to a drug screen, which may include testing for various substances, for employment purposes. I understand that refusing to submit to a drug screen may result in the withdrawal of my application or employment offer. I also understand that the results will be kept confidential and only shared with authorized personnel. By submitting this application, I understand and consent to a background check, which may include criminal history, employment verification, and other relevant information, for employment purposes. I understand that refusing to consent to a background check may result in the withdrawal of my application or employment offer. I also understand that I have the right to request a copy of the background check report.

As a MIG Welder / Fabricator, you'll build weldments that directly affect how Rotex, a Hillenbrand company, delivers reliable industrial separation equipment to customers who depend on consistent performance. You'll work on-site in Cincinnati, Ohio, where we manufacture screening and separation systems used across industrial processing environments. Your craftsmanship will help keep quality high, rework low, and deliveries on track. You'll contribute to a shop culture built on safe work, clear standards, and continuous improvement that supports sustainable growth. Shift: 1st, 8 hours, 5 days/week Standard Hours: Monday - Friday 6am - 2:30pm Overtime: As needed Monday - Friday 5am - 3:30pm, plus Saturdays. Location: 1230 Knowlton - Cincinnati, Ohio What You'll Do: • Weld ferrous metal components using Gas Metal Arc Welding (GMAW / MIG), Flux Cored Arc Welding (FCAW / flux-core), and Shielded Metal Arc Welding (SMAW / stick), following Welding Procedure Specifications (WPS) to meet print and shop requirements., • Prep and fit joints by grinding, beveling, laying out, tack welding, and using torch cutting as needed, so parts are ready for final weld-out with solid fit-up and minimal distortion., • Fabricate structural and non-structural weldments, including sub-assemblies and full assemblies, working across material thicknesses from 16-gauge through heavy plate steel., • Read blueprints, welding symbols, and fabrication drawings to confirm weld size, joint type, and sequence, and build to customer and engineering specifications., • Lay out, position, and square parts using measuring tools (calipers, combination squares, straightedges, and rulers) and hold alignment with clamps, fixtures, and jigs to keep assemblies in tolerance., • Perform all-position welding (flat, horizontal, vertical, and overhead) based on the job, maintaining consistent bead profile, penetration, and overall weld quality., • Inspect your work before and after welding using visual checks and basic inspection tools, and complete routine care on welding equipment (guns, leads, power sources, wire feeders, and grinders) to reduce downtime., • Other duties as assigned, including cross-functional tasks within the fabrication department. Team: • You'll work alongside welders, fabricators, and production partners in a respectful shop environment where you'll share priorities, communicate clearly, and support consistent standards. You'll help the team deliver safe, on-time builds that strengthen Rotex performance and Hillenbrand's long-term success. The Experience, Skills, and Abilities Needed: • 3+ years of hands-on welding and fabrication experience in a manufacturing, industrial, or heavy equipment environment., • Practical skill welding carbon steel or other ferrous materials with MIG (GMAW), flux-core (FCAW), and stick (SMAW)., • Welding certification from an accredited institution, and the ability to weld to a WPS., • Ability to read and interpret fabrication blueprints and welding symbols to complete fit-up and weld-out to spec., • Comfort with fit-up, tack, and final weld-out using common shop tools and equipment, including grinders, torches, clamps, fixtures, and jigs., • Ability to measure, lay out, and verify dimensions using basic inspection and layout tools to maintain tolerance and alignment., • Ability to work the posted schedule, flex for overtime as needed, and maintain safe work practices in a fabrication environment., • Ability to pass a pre-hire evaluation that includes a blueprint reading/interpretation test and a hands-on weld sample. If you're interested in joining the team, submit an application to be considered. Who We Are: The Rotex Group is a global leader in the manufacturing and supply of high-quality industrial screening and separation equipment for a wide range of industries. Over its 175-year history, the company has established a reputation for providing innovative and cost-effective solutions that meet the diverse needs of our customers. The Rotex Group is a business unit of Hillenbrand. Hillenbrand is a global industrial company that provides highly engineered, mission-critical processing equipment and solutions to customers in over 100 countries around the world. Our portfolio is composed of leading industrial brands that serve large, attractive end markets, including durable plastics, food, and recycling. Guided by our Purpose — Shape What Matters For Tomorrow™ — we pursue excellence, collaboration, and innovation to consistently shape solutions that best serve our associates, customers, communities, and other stakeholders. EEO: The policy of Hillenbrand Inc. is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, Hillenbrand Inc. and our operating companies are committed to being an Equal Employment Opportunity (EEO) Employer and offers opportunities to all job seekers including individuals with disabilities.

Xtreme California - Selma, CA 93662 Salary Range $20.29 - $22.72 Hourly Level Entry Position Type Full Time The Welder I is to provide assurance that our products meet Engineering and Quality requirements including on-time delivery. Shift: Day Shift - 6:30am – 3:00pm Primary Responsibilities: • Mig Welding of steel parts of varying sizes, thickness and weight., • Using cranes and rigging to move parts and weldments., • Using various cutting machines like plasma and oxy-fuel cutting torches., • Using various powered hand tools including grinders, sanders, drills, saw and others., • Complete and maintain all required paperwork, records and documentation., • Weld components in flat, vertical or overhead positions., • Must practice good housekeeping and properly dispose of waste according to safety and environmental policies., • Other duties and responsibilities that may be added if assigned by management. Basic Qualifications: • Must be able to read blueprints and have knowledge of weld symbols., • Must know fractions and decimals, including fraction conversions., • Must be able to read and use tape measure, steel rules and squares., • Ability to learn operations of multiple jigs/fixtures within a job area and must be able to regularly rotate jobs to meet standard rates and schedules., • Must work at a reasonable pace (measured by production efficiency) and within our quality standards to ensure timely completion., • Accurately measure and lay out locations for welded components., • Ability to use precision measuring instruments and equipment to build steel structures., • Must possess a strong work ethic., • Ability to stand for extended periods of time. Preferred Qualifications: • 1-year minimum MIG welding experience., • Certified welder. Education: • High School Diploma or GED Language Skills: • Must have the ability to read, write and comprehend written and verbal English. Note: • Drug screen required. If you have the necessary qualifications and are interested in joining our team as a MIG Welder I, please submit your application. We appreciate your interest in our company and will reach out to qualified candidates for further consideration. Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Vision insurance Experience: • Precision measuring instruments: 1 year (Required), • Rigging: 1 year (Required), • Crane: 1 year (Required), • Power tools: 1 year (Required), • MIG welding: 1 year (Required), • Blueprint reading: 1 year (Required), • Manufacturing: 1 year (Required)

Nichols Farms is one of the top processors of pistachios in the United States. For more than two decades, Nichols Farms has maintained superior quality and exceptional service in supplying pistachio and almond products to major retail and wholesale clients domestically and internationally. Nichols Farms maintains a state-of-the-art processing facility at their corporate headquarters in Hanford, California, employing over 350 employees. Join the Nichols Farms Team in their objective of continued growth. Nichols Farms possesses a strong employee-oriented environment dedicated to training and growth of team members. The Nichols Farms Mission and Vision supports a culture of striving for mutual success of our employees, suppliers and customers through operational excellence and educational development. POSITION SUMMARY: The Welder/Fabricator supports the Engineering Department Construction Projects by applying fabricator/welding skills and performing with a high degree of proficiency and effectiveness. Welder/Fabricator lays out, fits, assembles and welds fabricated components following company and safety procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Strong ability in installing and repairing/welding of equipment., • Plans layout, assembly and welding using knowledge of welding techniques., • Operates other shop equipment and tools needed to prepare components for welding., • Advanced in MIG, TIG, STICK, Stainless Steel, ARC Welding abilities., • Safety conscious uses such as fire prevention and knowledge of Fire blanket, Covers, and follows company SSOPs/SOPs., • Knowledge of Hot Work Permits, • Knows and follows procedures and plant programs such as GMPs, LOTO, Confined Space, and Fall Protection safely., • Ability to maintain daily paper and complete orders in a timely efficient manner., • Reads and interprets equipment manuals to perform required maintenance service., • Report Immediately to Lead/Supervisor/Manager of any damage, irregular activity, or unsafe conditions concerning equipment., • Operate a forklift, scissor lift, boom lift, telehandler and other industrial trucks., • Perform housekeeping of work area, including organizing and sweeping, maintaining of personal or company tools and equipment., • Perform other job duties and tasks as assigned by management. EDUCATION AND EXPERIENCE: • Preferably 5+ years of experience in food manufacturing or industrial environment, • Basic Mathematical Aptitude, • Strong Welding Skills in MIG, TIG, STICK or ARC and Sanitary Welding., • High School Diploma or GED required JOB ATTRIBUTES: • Safety Awareness: Ability to identify and correct conditions that affect employee safety., • Time Management: Ability to utilize the available time to organize and complete work within given deadlines., • Adaptability: Ability to adapt to change in the workplace. Capable of functioning in a fast-paced entrepreneurial setting., • Resource Management (People & Equipment) - Ability to obtain and appropriate the proper usage of equipment, facilities, and materials., • Prioritization: Ability to quickly prioritize among numerous pressing tasks and manage multiple priorities and deadlines., • Communication: Excellent verbal and written skills, as well as ability to make presentations., • Interpersonal: Ability to effectively build working relationships, • Team Involvement: Works effectively with teams and work groups. Actively participates in problem solving and interacts with team and work groups to achieve team and organizational goals., • Detail-oriented: Attention to detail, and ability to prioritize and manage multiple tasks. PHYSICAL DEMANDS and WORK ENVIRONMENT Facility is a manufacturing environment, and this position may primarily be outdoors. The manufacturing environment and working outdoors may include high levels of noise. When working outdoors conditions can include extreme cold, heat, or humidity; and sometimes can include work in dusty conditions. Ability to lift up to 50 pounds on occasion. Ability to wear Personal Protective Equipment (PPE) as designated by the company. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. This job description is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential functions. EOE/M/F/D/V

Operate automated welding and plasma equipment to weld outlets onto pipe in accordance with production specifications. Perform manual rewelds using hand-held welding equipment as required to meet quality standards. Load, position, and unload pipe fro Welder, 1st Shift, Equipment, Manufacturing, Production

ESSENTIAL DUTIES & KEY RESPONSIBILITIES: • Perform welding tasks using various methods such as GTAW, PAW and Resistance Welding., • Read and interpret blueprints, drawings, and specifications to complete work accurately., • Cut, shape, and assemble metal parts according to instructions., • Inspect finished products for quality, accuracy, and compliance with specifications., • Set up welding equipment and maintain tools in safe, working condition., • Select appropriate welding materials and consumables for each job., • Operate basic hand and power tools for preparation and finishing tasks., • Maintain inventory of welding materials and report shortages., • Follow all company safety policies, procedures, and OSHA regulations., • Wear proper personal protective equipment (PPE) and ensure a safe work environment., • Identify and report hazards or unsafe conditions to supervisors., • Participate in safety training and maintain compliance with welding certifications., • Maintain accurate records of work performed, including materials used and job progress., • Report completed work and any issues or defects to supervisors promptly., • Work closely with other welders, fabricators, and production team members., • Assist higher-level welders or technicians as needed for complex tasks., • Communicate effectively with supervisors regarding work progress and challenges. SKILLS & COMPETENCIES: • Basic knowledge of welding techniques and processes (GTAW, PAW, Resistance)., • Ability to read blueprints, technical drawings, and specifications., • Strong attention to detail and quality workmanship., • Physical stamina and manual dexterity., • Commitment to workplace safety and following procedures. EDUCATION & EXPERIENCE Required • High school diploma or equivalent., • Minimum one (1) year of welding experience Desired • Completion of a welding training program or vocational certification preferred. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand and hear. The employee is frequently required to walk; reach with hands/arms; lift and/or lower; push and/or pull; and use hands to finger, handle, feel and/or finely manipulate objects. The employee must frequently lift/move and/or push/pull up to 20 lbs. and occasionally lift/move and/or push/pull up to 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Use of vision correction is acceptable, if necessary; however, any vision correction apparatus must meet all safety guidelines for the area of activity. EMPLOYEE ACKNOWLEDGEMENT: By signing below, I acknowledge that I have read this job description and fully understand the requirements set forth herein. I understand that this is to be used as a guide and that I will be responsible for performing other duties as assigned. I further understand that this job description does not constitute an employment contract with MW Components and is not intended to interfere with or modify the at-will employment relationship. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Responsible for manually welding in an industrial plant environment Job Responsibilities Fabrication of steel molds for concrete which includes use of hand and power tools, welding operations and use of lifting equipment Fabrication of steel form par Welder, 2nd Shift, Manufacturing, Transportation, Steel, Welding

Responsible for manually welding in an industrial plant environment Job Responsibilities Fabrication of steel molds for concrete which includes use of hand and power tools, welding operations and use of lifting equipment Fabrication of steel form par Welder, 1st Shift, Manufacturing, Transportation, Steel, Welding

Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. At Flex, we welcome people of all backgrounds. Our employees thrive here by living our values: we support each other as we strive to find a better way, we move fast with discipline and purpose, and we do the right thing always. Through a respectful, inclusive and collaborative culture, a career at Flex offers the opportunity to make a difference, invest in your career growth and join our purpose -- to make great products that create value and improve people's lives. Job summary: To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Panel Welder in USA Fontana, Ca. Report to the Production Manager, the Panel Welder, is responsible for welding and cutting down metal and steel pieces using welding equipment and techniques. This position uses the GMAW/MIG process. What a typical day looks like: • Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job, • Fabricates various items using cutting, burning, and welding techniques and equipment, • Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage, • Prepares, assembles, and tacks weld parts and surfaces to be welded, • Maintains, organizes, and cleans equipment and the work area, • Notifies supervisor when faulty equipment or defective materials are discovered, • Performs other related duties as assigned The experience we're looking to add to our team: • High School Diploma or equivalent, • At least 2-4 years of previous work experience in MIG Welding process, • Thorough understanding of machines and tools used in welding include designs, uses, maintenance and repair., • Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints., • Ability to demonstrate proficiency in the GMAW process., • Excellent ability to read and listen to assignments given in a variety of forms., • Ability to read a tape measure., • Basic understanding of mathematics is related to welding assignments. What the physical requirements are: • Must be able to weld components that are vertical or flat, • Must have enough manual dexterity and stability as required for precision work., • Must be able to see details at close range., • Must be able to lift up to 35 pounds at times., • Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials., • Must wear PPE, such as respirator, welding equipment, gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: • Full range of medical, dental, and vision plans, • Life Insurance, • Short-term and Long-term Disability, • Matching 401(k) Contributions, • Vacation and Paid Sick Time, • Tuition Reimbursement The base pay range for this position is provided below. The final base rate offered will be determined using job-related, non-discriminatory criteria, including but not limited to experience, qualifications, geographic location, education, external market data, and internal equity. $18.59 USD - $25.10 USD Hourly Operations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world. A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary. Through a respectful, inclusive and collaborative culture, a career at Flex offers the opportunity to make a difference, invest in your career growth and join our purpose -- to make great products that create value and improve people's lives. To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Structural Welder in USA Fontana, Ca. Report to the Production Manager, Structural Welder, is responsible for welding structural steel (c-channels) to fabricate the framing for sheet metal enclosure buildings using welding equipment and techniques. This position uses the FCAW process. What a typical day looks like: • Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job., • Lay out, position, align, and secure parts prior to assembly, • Weld structural steel (c-channels) in flat, vertical, or overhead positions using welding techniques and equipment, • Clamp, hold, or tack weld parts to obtain required configurations and positions for welding, • Determine required equipment and welding techniques, applying knowledge of metallurgy, geometry, and welding techniques, • Maintains, organizes, and cleans equipment and the work area., • Notifies supervisor when faulty equipment or defective materials are discovered., • Complete all other duties as assigned The experience we're looking to add to our team: • High School Diploma or equivalent, • Completion of a formal apprenticeship OR 2+ years' experience in dual shield welding process, • Certification required: AWS D1.1 FCAW (Flux Core Arc Welding), • Reading comprehension skills with the ability to interpret and follow written directions, blueprints, and drawings including weld symbols, • Basic math skills to meet technical specifications and measurements, • Thorough understanding of machines and tools used in welding techniques including designs, uses, maintenance, and repair, • Ability to demonstrate proficiency in the FCAW process for structural welding., • Ability to read a tape measure., • Ability to make jigs and setups, • Overhead crane operation a plus What the physical requirements are: • Must be able to weld components that are vertical, flat, or overhead., • Must have enough manual dexterity and stability as required for precision work., • Must be able to see details at close range., • Must be able to lift up to 35 pounds at times., • Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials., • Must wear PPE, such as respirator, welding equipment, gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: • Full range of medical, dental, and vision plans, • Life Insurance, • Short-term and Long-term Disability, • Matching 401(k) Contributions, • Vacation and Paid Sick Time, • Tuition Reimbursement Application Deadline: Applications for this job position will be accepted for at least five days following the job posting start date below and continuing until the end date below or until the position is filled. This posting may close sooner due to application volume. Job Posting Start Date 09-10-2026 Job Posting End Date 11-06-2026 The base pay range for this position is provided below. The final base rate offered will be determined using job-related, non-discriminatory criteria, including but not limited to experience, qualifications, geographic location, education, external market data, and internal equity. $21.96 USD - $29.64 USD Hourly Job Category: Operations Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world. A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary. Through a respectful, inclusive and collaborative culture, a career at Flex offers the opportunity to make a difference, invest in your career growth and join our purpose -- to make great products that create value and improve people's lives. To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Structural Welder in USA Fontana, Ca. Report to the Production Manager, Structural Welder, is responsible for welding structural steel (c-channels) to fabricate the framing for sheet metal enclosure buildings using welding equipment and techniques. This position uses the FCAW process. What a typical day looks like: • Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job., • Lay out, position, align, and secure parts prior to assembly, • Weld structural steel (c-channels) in flat, vertical, or overhead positions using welding techniques and equipment, • Clamp, hold, or tack weld parts to obtain required configurations and positions for welding, • Determine required equipment and welding techniques, applying knowledge of metallurgy, geometry, and welding techniques, • Maintains, organizes, and cleans equipment and the work area., • Notifies supervisor when faulty equipment or defective materials are discovered., • Complete all other duties as assigned The experience we're looking to add to our team: • High School Diploma or equivalent, • Completion of a formal apprenticeship OR 2+ years' experience in dual shield welding process, • Certification required: AWS D1.1 FCAW (Flux Core Arc Welding), • Reading comprehension skills with the ability to interpret and follow written directions, blueprints, and drawings including weld symbols, • Basic math skills to meet technical specifications and measurements, • Thorough understanding of machines and tools used in welding techniques including designs, uses, maintenance, and repair, • Ability to demonstrate proficiency in the FCAW process for structural welding., • Ability to read a tape measure., • Ability to make jigs and setups, • Overhead crane operation a plus What the physical requirements are: • Must be able to weld components that are vertical, flat, or overhead., • Must have enough manual dexterity and stability as required for precision work., • Must be able to see details at close range., • Must be able to lift up to 35 pounds at times., • Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials., • Must wear PPE, such as respirator, welding equipment, gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: • Full range of medical, dental, and vision plans, • Life Insurance, • Short-term and Long-term Disability, • Matching 401(k) Contributions, • Vacation and Paid Sick Time, • Tuition Reimbursement Job Category: Operations Is Sponsorship Available? No Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

For over 100 years, BlueScope continues to build on our reputation of quality brands and products, leading technology and a customer-first spirit. Through our global brands, we are one of the largest manufacturers of building solutions in the world. Our diverse, bright and inspired workforce is committed to bettering the communities we serve through breakthrough thinking and innovations. Your goals, ideas and perspective can help shape our future – we look forward to hearing them! Join Our Team as a Welder! We're looking for skilled and detail-oriented individuals to join, fabricate, and repair metal into high-quality components for our community. Whether you're an experienced welder or eager to learn and grow in a dynamic environment, we welcome candidates of all backgrounds to bring their unique strengths to our team. What We Offer • Training and Growth: Hands-on training and opportunities for professional development, regardless of prior experience., • Supportive Team: A collaborative work environment where you'll feel supported and empowered., • Inclusive Environment: A culture that values diversity and promotes equity, ensuring everyone has a voice and opportunities to succeed., • Competitive Benefits: A comprehensive benefits package and work-life balance initiatives. What We're Looking For BlueScope Buildings is committed to being an employer of choice by creating a valuable work experience that keeps our people engaged, productive, safe and healthy. You're a great fit if you: • Have a keen eye for detail and take pride in producing quality work., • Enjoy hands-on roles and working with machinery or are eager to learn., • Are comfortable working in a supportive, team-oriented environment., • Value safety, organization, and continuous improvement. What You'll Do • Join and Fabricate: Interpret blueprints, specifications, drawings or schematics to determine appropriate welding processes., • Prepare and Set Up: Position, align, fit and weld parts to form complete units or subunits, following blueprints and layout specifications using jigs, welding torches, and hand tools, • Lift and Position Materials: Safely use lifting devices, such as cranes and forklifts, to position materials or parts as needed., • Ensure Quality: Utilize measuring tools and processes to perform inspections before, during, and after production, ensuring materials meet exact specifications., • Contribute to Improvement: Actively participate in continuous improvement and corrective action activities., • Maintain and Organize: Keep track of material inventory, perform machine maintenance, and support housekeeping and organizational standards, such as 5-S practices. The expected pay scale for this role is $22.62-$24.29 per hour, depending on experience, skill set, and qualifications. In addition to base salary, this position is eligible for monthly bonus, health, and welfare benefits and 401(k) match in accordance with BlueScope policies. Join a team where your skills, ideas, and contributions will make an impact. Let's build something extraordinary—together. The preceding job responsibilities and tasks were designed to indicate the general nature and level of work performed by associates in this job. It is not designed to contain or be interpreted as a comprehensive inventory of all job duties and responsibilities required of associates assigned to this job. Associates may be required to perform other duties as assigned. Additional job competencies, individual goals, and performance measurements are set at the department level. The benefits are just as rewarding as the work at BlueScope. To support our goal, we offer a total compensation plan and an outstanding benefits package that includes health insurance, life insurance, short and long term disability, paid time off, and retirement. EEO: Employer/M/F/Disabled/Protected Veteran BlueScope is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status, as a protected veteran, among other things, or status as a qualified individual with disability.

Job DescriptionJob Title: TIG WelderJob Description The TIG Welder will perform precision welding on a wide range of components, from small medical devices to complex aerospace products. This role focuses primarily on stainless steel, with regular work on mild (carbon) steel and occasional aluminum welding. The welder will interpret blueprints, prepare and fit metal components, and ensure high-quality welds throughout the production process in an industrial shop environment. Responsibilities • Interpret and follow blueprints to arrange metal pieces and position components accurately before TIG welding., • Perform TIG welding in multiple positions, including flat, horizontal, and vertical, on stainless steel, carbon steel, and occasionally aluminum., • Safely set up and operate TIG welding machines and other shop equipment in accordance with safety procedures., • Match work orders to the correct components and verify that materials and specifications align with job requirements., • Conduct continuous quality inspections during the production process to ensure welds and finished parts meet specifications., • Process and complete all required production and quality documentation accurately and on time., • Weld, grind, and polish metal components to meet detailed component and finish specifications., • Maintain a safe, clean, and organized work area, following all safety guidelines and using appropriate protective equipment.Essential Skills, • Proficient TIG welding skills, particularly on stainless steel and mild (carbon) steel., • Ability to read and interpret blueprints and technical drawings., • Experience in metal fabrication, including fitting and preparing components for welding., • Capability to weld in flat, horizontal, and vertical positions., • Skill in grinding and polishing metals to meet component specifications., • Strong attention to detail and commitment to completing thorough quality inspections., • Ability to safely set up and operate welding machines and related shop equipment., • Competence in matching work orders to components and following production instructions accurately.Additional Skills & Qualifications, • Experience working with aluminum using TIG welding is a strong plus., • MIG welding experience is a plus, even though formal certification is not required., • Familiarity with documenting production and quality activities in a manufacturing environment., • Comfort working with a variety of metals and adapting welding techniques to different materials.Why Work Here? Join a hands-on industrial environment where craftsmanship, precision, and safety are highly valued. You will work on diverse and interesting projects, ranging from small, intricate components to complex, high-performance products, offering continuous opportunities to refine and expand your welding skills. The team-oriented shop culture encourages collaboration, professional growth, and pride in producing high-quality work. Work Environment The role is based in a dirty, industrial shop environment that can be loud when machines are running. This is a physically demanding position that requires standing for long periods, lifting heavy equipment, and consistently wearing and using appropriate safety gear. You will work around active machinery, welding equipment, and metal fabrication tools, following established safety protocols and maintaining a clean, organized workspace. Job Type & Location This is a Contract to Hire position based out of Newark, CA. Pay and Benefits The pay range for this position is $25.00 - $34.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Newark,CA. Application Deadline This position is anticipated to close on Oct 15, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Hawthorne, CA | On-site Join a well-funded, early-stage energy technology startup developing advanced power generation systems. The company is building compact, high-performance turbine technology designed to deliver reliable power across a range of energy applications. We are looking for an experienced ASME Welding Technician to support the fabrication and assembly of high-pressure, high-temperature mechanical systems. You will work directly with mechanical, fluid systems, and test engineers to fabricate pressure-rated piping, structural assemblies, and critical hardware used in the development and testing of next-generation energy technology. This is a hands-on role for someone who takes pride in producing high-quality welds and working on complex hardware. You will have significant ownership over fabrication work, from interpreting engineering drawings and preparing materials through welding, inspection, and final assembly. We are a venture-backed energy technology startup developing advanced thermal and power generation systems for industrial and emerging energy markets. Our team combines mechanical engineering, fluid systems, controls, and hardware testing to develop compact, scalable power solutions. Based in Hawthorne, California, we are building and testing our next generation of hardware with a small, highly technical team. • Fabricate and weld high-pressure piping, pressure-containing components, and mechanical assemblies in accordance with applicable ASME codes and qualified welding procedures., • Perform precision GTAW (TIG) welding on stainless steel, nickel-based alloys, and carbon steel, including open-root and internally purged welds., • Interpret engineering drawings, piping isometrics, and weld symbols to prepare, fit, and assemble components for welding., • Perform material preparation, joint beveling, cleaning, fit-up, and fixturing to ensure weld quality and dimensional accuracy., • Monitor welding parameters, heat input, and interpass temperatures to maintain weld integrity and compliance with applicable procedures., • Fabricate structural frames, equipment skids, mounting brackets, fixtures, and other hardware used in system development and testing., • Support weld inspections and nondestructive examination, including visual inspection, liquid penetrant testing, and radiographic testing., • Maintain accurate welding records, material traceability, and fabrication documentation for code-compliant assemblies., • Work closely with engineering teams to identify fabrication challenges and recommend improvements to weld joint design, assembly methods, and manufacturability., • Maintain welding equipment, tooling, and shop work areas to support safe and efficient fabrication activities., • 4+ years of professional welding experience, including hands-on fabrication of ASME code-compliant components., • Current or recent welder performance qualifications (WPQ) in accordance with ASME Section IX., • Strong proficiency in GTAW (TIG) welding of stainless steel and high-alloy materials., • Experience fabricating pressure piping, pressure vessels, or other pressure-containing hardware in accordance with ASME B31.1, B31.3, or Section VIII., • Ability to interpret mechanical drawings, piping isometrics, welding symbols, and fabrication specifications., • Experience preparing and executing welds using qualified welding procedure specifications (WPS)., • Proficiency with common fabrication techniques, including cutting, grinding, joint preparation, fit-up, and basic machining., • Working knowledge of welding safety practices, material handling, and quality requirements for pressure-rated hardware., • Experience welding nickel-based superalloys, including Inconel, or other high-temperature materials., • Background in aerospace, rocket propulsion, industrial energy, power generation, nuclear, or oil and gas fabrication., • Experience with orbital welding, precision tube welding, or small-diameter pressure piping., • Familiarity with welding procedure development, procedure qualification records (PQR), and welder qualification testing., • Experience supporting nondestructive examination and inspection requirements for ASME code work., • AWS Certified Welder credentials or coursework toward Certified Welding Inspector (CWI) certification., • Additional proficiency in SMAW (stick) or GMAW (MIG) welding processes., • Experience working in prototype fabrication, research and development, or early-stage hardware startup environments., • Join a well-funded, early-stage company developing advanced power generation technology., • Work directly with experienced engineers to fabricate critical hardware for high-pressure, high-temperature energy systems., • Take ownership of fabrication work from initial fit-up through welding, inspection, and final assembly., • Gain hands-on exposure to advanced materials, precision welding, and specialized mechanical systems., • Work within a small, technical team where your contributions directly influence hardware development and testing., • Meaningful equity ownership., • Medical, dental, and vision insurance., • Fully stocked kitchen. $38 - $58 per hour, depending on experience.

Founded in 1917, Parker Hannifin Corporation is a $19.9 billion global company. With annual sales of $19.9 billion in fiscal year 2024, Parker Hannifin is the world's leading diversified manufacturer of motion and control technologies and systems, providing precision-engineered solutions for a wide variety of mobile, industrial and aerospace markets. The company has operations in 43 countries around the world. Parker has increased its annual dividends paid to shareholders for 68 consecutive fiscal years, among the top five longest-running dividend-increase records in the S&P 500 index. Parker's engineering expertise and broad range of core technologies uniquely positions the company to solve some of the world's greatest engineering challenges. By partnering with customers, Parker improves their productivity and profitability and seeks new ways to solve humanity's biggest challenges. Headquartered in Richmond, California, Parker Hannifin's Veriflo Division delivers proven gas and fluid delivery systems and components to customers around the globe. We have the ability to integrate multiple technologies into unique solutions that require the highest levels of precision and performance in cost-effective packages. For semiconductor tool manufacturers, Veriflo offers ultra-high purity stainless steel and fluoropolymer fittings, valves, regulators and manifolds for VMBs, CMBs, tooling modules, wafer cleaning, wet etching and other specialized microelectronics processing applications. This high-tech market is constantly evolving, and Parker offers an extensive portfolio of products to support the demands of cleanliness and surface preparation for every process. Working at Parker is far more than just a job. A career with us means joining a family of more than 61,000 dedicated people from around the globe. At Parker, you'll have the opportunity to grow your career, give back to your community, and make a real impact. Seeking experienced Production Welder to join 2nd Shift production team. The Production Welder role supports daily production of the Weld area by performing high-precision orbital, lathe and laser welding operations. As a Production Welder, your primary responsibility is setting up, operating, and maintaining orbital welding equipment to produce high-quality welds on stainless steel tubes, fittings, valve and regulator bodies, and other related components. This role ensures compliance with engineering drawings, welding procedures, safety standards, and quality requirements. Daily interaction occurs with other production welders and the weld area lead. This role reports to the Production Supervisor. • Perform welding tasks with a high degree of precision and skill in accordance with specifications • Read and interpret technical blueprints and schematics • Operate various welding equipment, including GTAW orbital, lathe, and laser welding machines • Assess and select appropriate welding methods and materials • Perform troubleshooting and problem-solving tasks • Ensure all welding tasks comply with safety and quality standards • Conduct welding inspections and quality control procedures • Collaborate with team members to complete projects efficiently • Maintain a clean and organized work environment • Other duties as assigned, • Proficiency in reading and interpreting blueprints, schematics, and technical drawings, • Proficiency in various GTAW welding techniques including, but not limited to, orbital, lathe and laser welding, • Ability to work with various high-purity stainless steel materials, • Strong troubleshooting and problem-solving skills, • Skilled in performing quality control inspections and weld testing, • Ability to work independently and as part of a team, • Strong attention to detail and commitment to producing high-quality welds, • Willing to work daily and weekend overtime as needed, • Detail-oriented with a positive attitude, strong work ethic, and eagerness to learn on the job., • Strong communication skills and the ability to work cooperatively under supervision are essential., • Ability to self-manage workload to meet daily, weekly and monthly targets Education/Experience: • High school diploma or equivalent required • Associate degree or technical/trade certificate in welding technology, manufacturing or similar; or equivalent experience is preferred. • Minimum of 5 years of experience as a welder is preferred • Strong knowledge of welding standards and safety protocols • Certified Welder status (AWS, CWB, or equivalent) preferred Competitive Compensation • Pay Range determined by Union Contract: $19.22/hr to $29.09/hr Benefit & Retirement Plans • Medical, dental, vision, disability and life coverage provided through the union plan., • Participation in the California Machinist 401(k) Plan., • Participation in the IAM National Pension Fund., • Vacation and Company-Paid Holidays. Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission Drug-Free Workplace In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment.

Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Are you a skilled welder looking for meaningful, hands-on work that keeps the community moving? This opportunity allows skilled professionals to apply their craft where it truly matters—maintaining and strengthening the infrastructure behind one of the nation's leading transit systems. The incumbent will be apart of a highly skilled team responsible for performing high-quality field welding and fabrication across District facilities and wayside structures. Under general supervision, Structures Welders independently perform a full range of welding techniques, including arc, MIG, TIG, and gas welding, on key structural components such as platforms, stairways, gates, grating, and other critical infrastructure. The position offers technically challenging and rewarding work, including preparing and fabricating materials for repair, interpreting blueprints and welding symbols, selecting the appropriate tools for each assignment, and completing welding work in a variety of field conditions. Duties may also include operating high-rail vehicles, cranes, and rigging equipment, as well as performing repairs in elevated or confined spaces, providing variety and opportunities for continuous skill development. Successful candidates will possess a strong technical welding background, a dedication to safety, and the ability to work both independently and as part of a collaborative crew. Flexibility is key, as this position supports varied shifts, including nights and weekends, as well as emergency response situations essential to keeping the system operating reliably. The most qualified candidates for this position will have highly developed competencies beyond the minimum qualifications in the following areas, which will be reinforced with related work experience and clearly articulated during the selection process: • Performing precision field welding across a variety of metals (steel, stainless steel, aluminum, etc.), • Reading and interpreting blueprints, schematics, and welding symbols, • Fabricating and repairing structural components in field conditions, • Safely operating tools, equipment, and vehicles used in welding operations, • Applying safety standards and properly using protective equipment, • Problem-solving and adapting to changing field conditions, • Maintaining accurate records of work performed, • Working effectively both independently and within a team Application & Selection Process This is a SEIU Local 1021 Bargaining unit position. All full-time SEIU District employees must follow the "Bid Form" process and deposit their bids in the bid box. Failure to comply may invalidate the employee's bid. As actual vacancies occur, District employees on the internal eligibility list will be considered before external candidates. All EXTERNAL and current non-SEIU applicants must apply online at www.bart.gov/jobs. Applications must be completed in full and include all requested information, including dates of employment, positions held, hours worked, and a detailed description of duties performed. Applicants may attach a resume to their application or bid form to provide supplemental information; however, the resume does not substitute for completing the application or bid form in its entirety. Only information included on the application or bid form and resume at the time of submission will be used to determine whether applicants meet the minimum qualifications for the position. All application and bid form materials must be submitted by the closing date and time listed on the job announcement. Applications and bid forms received after the closing deadline will not be considered. The selection process for this position may include one or more of the following: a skills or performance demonstration, written examination, and/or panel or individual interview. External applicants will not be considered until all employees who have applied have been considered first. All applications and bid forms will be reviewed by the Talent Acquisition Division to determine whether applicants meet the established Minimum Qualifications (MQs). Applicants who meet the MQs may be referred to the hiring department for further evaluation as part of the selection process. The selected candidate must demonstrate a work history reflecting reliability and dependability and may be required to provide copies of certificates, diplomas, or other documentation required by law, including proof of authorization to work in the United States, and pass a pre-employment medical examination which includes a drug screen, which is specific to the essential job functions and requirements. Pre-employment processing will also include a background check. This requirement does not apply to current full-time District employees unless the position requires additional evaluations or clearances. • Performs precision arc, MIG, TIG and gas welding on such structural elements as grating, doors, stairs, gates, and platforms, which include steel, stainless steel, iron, aluminum, and sheet metal welding., • Reads diagrams and prints and discusses work to be performed with the supervisor or foreworker., • Determines necessary approach, tools and equipment and loads them on a vehicle for transportation on the work site., • Operates a high-rail vehicle to reach the job location., • Prepares surfaces to be welded by cutting, chipping, shaping and sanding., • Uses a micrometer and other measuring devices to determine measurements., • Roughs out and fabricates appropriate parts to effect repairs., • Adjusts and uses welding, brazing and soldering equipment., • Grinds, smoothes and finishes welding surfaces., • Performs shop work as required to fabricate repair parts for field placement., • Performs specialized welding as required on vehicles, pressurized pipes, and other surfaces to effect repair; may work from scaffolds to accomplish required welding., • Sets up rigging to move heavy objects in preparation for welding., • Uses an overhead or mobile crane, forklift and other equipment and vehicles as required to complete work., • Cleans sumps, digs trenches, and otherwise exposed areas to be welded., • Completes records of work performed and materials used., • Reports the need for additional maintenance to the foreworker., • Maintains a supply of welding gasses, rods, tools and safety equipment and notifies supervisor of the need for replacements as needed. Completion of an apprenticeship in welding and one year of experience in combination welding. Heavy rail welding and repair experience are desirable. Other Requirements: Must possess and maintain a valid California Class A driver's license and have a satisfactory driving record. Must be able to obtain and maintain District certification for the operation of high-rail vehicles. Must be able to lift and carry equipment weighing up to 50 pounds and have sufficient mobility to walk, climb and stoop to perform work. Must be willing to work off hours shifts. Knowledge of : • Methods and techniques of arc, gas, MIG and TIG welding, particularly as applied to field situations., • Types of welding rods and materials and their applications. Types of welding gasses and mixtures., • Storage and handling requirements of various types of welding rods., • Safety practices pertaining to the work, including the use of eye, respiratory and hand protection. Skill in : • Performing field welding of steel, iron, aluminum and other metals., • Preparing surfaces to achieve effective welds., • Grinding, smoothing and finishing welded surfaces., • Treating and tempering metals., • Fabricating parts to effect field welding repairs., • Using precision measuring devices accurately., • Reading and interpreting diagrams, blueprints, written instructions and welding symbols. Working independently or in a crew situation., • Keeping basic written records of work performed. The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov. Qualified veterans may be eligible to obtain additional veteran's

Full-time Simi Valley, CA, US Exclusive confidential search — details shared with qualified applicants. NextDeavor offers health, vision and dental benefits for contract employees Paid sick leave eligibility is contingent on state of residence Optional 401k Plan (excludes employer match) Opportunity to get your foot in the door at a well-established corporation, with potential for extended or permanent full-time employment You will perform routine welding and fitting tasks that keep production moving and support product and process improvement initiatives. You will impact safety, quality, and throughput while working closely with the production team and quality/stakeholder partners on the 1st shift. This is an onsite role (M-F, 5:00am - 1:30pm). • Prepare welds, perform various welding operations, and complete weld finishing tasks, • Manufacture and assemble metal fabrications and mechanical components per drawings, • Read and follow mechanical drawings and weld prints to meet quality standards, • Maintain consistent workmanship and comply with regulatory and Quality Assurance requirements, • Support product improvement initiatives by identifying and implementing efficiency and quality enhancements, • Maintain a safe work environment and adhere to safety goals, • Provide regular, consistent attendance and be available for occasional nights/weekends or additional hours as required, • Secondary Certificate/High School Diploma, • Vocational training, apprenticeship, or equivalent experience in welding/fitting, • 1–2 years of welding or related production experience, • Knowledge of welding techniques and weld preparation, • Ability to read and understand mechanical drawings and weld prints, • Strong basic math skills, • Good communication and organizational skills, • Prior assembly experience on a production line $16.50 - $19.23/hour This role may fill quickly. Submit your resume to be considered.

Location: San Diego, CA, US, 92113 National Steel and Shipbuilding Com Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks as assigned, some of which may become essential to the position. Three years experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must pass NASSCOs plate test in all positions and pipe test on 6G restricted fix position using FCAW and GTAW processes. Must be certified to operate high reaching equipment. Must have ability to work at heights, in confined spaces, and be available to work any shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. • Set up tools, welding equipment and supplies at job site, • Burns pipe or penetrations., • Tacks and welds pipe., • Cleans weld area; sweeps and removes scrap., • Other job duties as may be assigned relevant to the trade. Welding leads, welding machinery, ventilation hose, tool bag, ladder, grinders, mini grid, burning leads, cutting torches, chipping hammers, welding stingers, and personal protective equipment. Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employees work area. Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. PAY SCALE $35.36 - $38.71 This pay range is a reasonable estimate of the hourly range for this role. It takes into account the wide range of factors considered in making compensation decisions; including but not limited to skill sets, experience, training, and education. General Dynamics NASSCO also provides a variety of benefits including medical & dental insurance coverage, 401(k) retirement savings plan, flexible spending accounts/HSAs, life and disability insurance, company paid holidays and paid time off (PTO), wellness coaching, and an onsite health services. General Dynamics NASSCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.