Trabajos welder en California

Plant Maintenance is responsible for safe repair, maintenance of mining equipment typically found in an aggregate facility including, but not limited to cone crushers, jaw crushers, screen decks, material screws, conveyors, pumps, dust collectors, asphalt drums, bins, silos, hoppers. This individual is expected to complete pre-shift and post-shift equipment inspections, submit required daily documentation, and assist in plant operations as needed. At CalPortland, we’re proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That’s why we give you a wide range of benefits to choose from. All regular full time employees may enroll in a variety of health and welfare plans including medical, dental and vision plans. Other benefits include life insurance, disability coverage, employee assistance program, and retirement program. The company also has a variety of voluntary benefits for employees to choose from. • Perform safety/mechanical inspections of the plant and equipment, • Address any housekeeping issues within the work area, • Proper use of company provided and/or own tools to complete repair and maintenance tasks, • Able to use welder and cutting torches to repair and maintain plant equipment, • Understand all CalPortland policies and procedures, • Understand and comply with MSHA rules and regulations, • Good attendance and punctuality are a must, • Able to work irregular and extended hours and weekends to complete maintenance, repairs within the facility, • Proper use of PPE (Personal Protective Equipment) always High School Diploma/GED • Familiarity with aggregates and construction materials – sand, gravel, crushed rock, etc., • Have mining experience or other experiences including: welding, fabricating, belt splicing, and/or familiarity working around crushers, screens, sand screws, etc., • Knowledge of various aggregate plant equipment including hoppers, feeders, conveyors, screens, crushers, and track mounted screens and crushers, • Familiarity with mine site safety rules and regulations, • Ability to use various hand tools and equipment as necessary, • Ability to work outdoors in inclement weather (heat, cold, rain) for shifts up to 12 hours in length, • Able to lift 50 pounds frequently, up to 100 pounds occasionally, climb stairs/ladders, and walk on uneven or rough terrain, • Punctual and reliable, with adequate means of transportation to arrive at work when scheduled Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA regulated on-going drug and alcohol testing.

Job Description As a valued member of our team, the Yellow Iron Mechanic will be responsible for maintaining and repairing heavy construction and quarrying equipment, often referred to as “yellow iron” machinery. This includes but is not limited to excavators, loaders, dozers, skid steers, and other quarrying machinery. The mechanic ensures the machinery is in safe, working order, performs regular inspections, diagnoses issues, and carries out necessary repairs, preventive maintenance, or replacements. Safety, efficiency, and compliance with industry regulations are key aspects of this role. Starting pay is $32 - $42 per hour Benefits · Paid Holidays · Paid Vacation · Medical, Dental, Vision · 401k Retirement · $100 credit for boots after 90 days · Uniforms provided · Tool allowance when applicable · Monthly credit for cellphone use Essential Functions: • Adhere to and enforce all safety regulations and guidelines pertaining to MSHA, and OSHA., • Regularly inspect and maintain heavy construction and quarrying equipment to ensure they are in safe, working order., • Diagnose mechanical issues and carry out necessary repairs or replacements on machinery such as excavators, loaders, dozers, skid steers, and other quarrying machinery., • Perform necessary repairs and preventive maintenance to address problems promptly., • Maintain accurate records of equipment inspections, maintenance, and repairs., • Communicate effectively with team members and management about equipment status and needs., • Assist in the operation of machinery involved in the quarry and the concrete aggregate production process to ensure production continues in an efficient manner., • Read and interpret schematics and technical manuals to effectively and efficiently diagnose and repair heavy machinery. Non-Essential Duties: • Attend all Safety meetings., • Clean up work area daily., • Washes vehicles and equipment., • Performs other duties as assigned. Core Competencies: • Proficiency in diagnosing and fixing mechanical issues in heavy machinery., • Understanding of the operational principles of construction and quarrying equipment., • Knowledge of safety regulations and procedures in the industry., • Ability to troubleshoot issues and find effective solutions., • Capability of performing physically demanding tasks, including lifting heavy objects and working in various weather conditions., • Ability to effectively communicate with team members and management., • Precision in performing maintenance tasks and keeping accurate records., • Ability to work in a fast-paced environment and adapt to changing circumstances. Position Type/Expected Hours of Work This is a full-time position. General days and hours of work are Monday through Friday, hours to be determined. Not eligible for remote work. Occasional evening and weekend work may be required as job duties demand. Travel Required: Less than 10% Preferred Education and Experience • 3+ years of experience as a mechanic, especially working with heavy diesel equipment., • 3+ years of experience with yellow iron equipment, bulldozers, excavators, loaders, etc., • Working knowledge of MSHA, OSHA standards and regulations., • Experience with hand tools and power tools used in mechanical work., • Knowledge of basic tire service and repair techniques., • Experience with hydraulics., • Ability to read and interpret schematics and technical manuals., • Valid Class B and/or C license required., • Must be able to read, write and speak English. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Physical Demands and Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, hazardous chemicals and outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat and risk of electrical shock. The noise level in the work environment is usually moderate to loud. The employee is regularly exposed to wet or slippery ground conditions. Employee must wear required personal protective equipment; up to and including safety vest, hard hat, ear protection, gloves and safety glasses. The Welder must be able to work quickly and skillfully with the hands. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to finger, handle or feel and reach with hands and arms. The employee is frequently required to sit, walk, balance, stoop, kneel, crouch, crawl, talk or hear. The employee must occasionally life and/or move up to 50 pounds. This Organization Participates in E-Verify Esta Organizacion Participa en E-Verify Coast Aggregates is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Coast Aggregates es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job DescriptionDescription: Job Title: HVAC Technician Supervisor: Service Manager Hours: Full-Time, OT when needed Schedule: M-F, Rotating weekends and on call Exempt / Non Exempt : Non Exempt/hourly Salary/ Rate of Pay: $20+ DOE DUTIES AND RESPONSIBILITIES: • Inspect, repair, modify and install HVAC equipment including refrigeration and air conditioning compressors, receivers, condensers, chillers, water cooling towers, forced air converter units, pumps, automatic and hand valves, expansion valves and capillary tubes., • Conduct regular preventive maintenance inspections of refrigeration units, isolated heating and ventilating units, including boilers, gas and electrically operated air conditioning equipment, and make necessary adjustments or repairs; service and repair evaporative coolers., • Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls, safety valves, and automatic gas valves., • Operate a variety of hand and power tools, welder torch, vacuum pump, test equipment utilized in the trade and a motor vehicle; maintain equipment in effective and safe working condition; maintain parts and tool inventory., • Repair and rebuild semi-hermetic reciprocating compressors and compressors for centrifugal refrigeration machines., • Perform skilled electrical maintenance work in the repair, installation and alteration of HVAC equipment, components, timers, motors and wiring systems as needed; connect motors to control panels., • Test and examine boiler operations, observing meter and pressure gauges; conduct boiler water quality test and treatment; adjust boiler burner combustion., • Lubricate and pack heating, ventilation, refrigeration, and air-conditioning motors, pumps, fans, and other equipment., • Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of refrigeration and air conditioning systems; flush boilers, descale tubing; rebuild pressure and temperature safety valves and water pumps., • Install, rebuild, replace or repair fans, motors, thermostats, fuses, filters, bearings, valves, controls, gaskets and other equipment as necessary., • Maintain related records concerning time, labor and materials; maintain log of, • tasks performed and write reports as required., • Perform other duties as assigned., • Maintain regular attendance. KNOWLEDGE AND ABILITIES: KNOWLEDGE OF: • Standard practices of the HVAC and refrigeration trade., • Theory of HVAC and refrigeration systems., • Materials, methods and tools used in the operation and repair of HVAC and, • refrigeration systems., • Applicable building codes, ordinances and regulations of State and local, • authorities pertaining to HVAC, refrigeration and boilers., • Air compressors and pneumatic controls., • Cooling tower and boiler water treatment., • Manual and electrical tools and equipment applicable to the HVAC and, • refrigeration trade., • Welding and soldering techniques., • Health and safety regulations., • Basic record-keeping techniques., • Proper methods of storing equipment, materials and supplies. ABILITY TO: • Perform skilled mechanical maintenance duties in the inspection, repair,, • installation and alteration of District heating, ventilation, air conditioning and, • refrigeration systems and related equipment and facilities., • Calibrate systems., • Perform preventive maintenance and routine servicing of equipment., • Diagnose defects, and install, repair and maintain heating, ventilating, refrigeration,, • and air-conditioning units., • Follow oral and written instructions., • Operate specialized machinery, equipment and tools utilized in the repair,, • installation and maintenance of heating, ventilation, air conditioning and, • refrigeration systems., • Communicate effectively both orally and in writing., • Understand and follow oral and written directions., • Work cooperatively with others., • Work independently with little direction., • Meet schedules and time lines., • Maintain routine records and prepare reports., • Routinely lift objects weighing up to 75 pounds., • Lift heavy objects. PHYSICAL DEMANDS: • Work is performed while standing, sitting, and/or crouching for full shift., • Requires the ability to communicate effectively using speech, vision and hearing., • Requires the use of hands for simple grasping and fine manipulations., • Requires bending, squatting, crawling, climbing, reaching., • Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds., • Requires the ability to go up and down ladders, stairs, emergency exits etc., multiple times a day., • Requires activities involving being around moving machinery, exposure to marked changes in temperature and humidity, and exposure to dust, fumes and gases.Requirements:

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n Welder/Fabricator, Maritime\n \n \nAnduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology.\n \n \nAnduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a real-time, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n ABOUT THE TEAM\n \nAnduril's Manufacturing Technology Team is seeking a Welder/Fabricator, Maritime to join our team. The Maritime Manufacturing Technology Team is responsible for rapidly developing and implementing manufacturing materials, technologies and processes for cutting-edge defense hardware, including deployable static and moving surface, undersea and sea to air vehicles and scaling these products in our new manufacturing facilities.\n \n ABOUT THE JOB\n \nAs a Welder/Fabricator, Maritime, you will be involved with fabricating prototypes and tooling that support the manufacturing development and assembly processes. Your skill set will be utilized to drive efficient, rapid, on-time production and start-up of the new production facilities for the new maritime vehicles. The right person for this role has a wealth of experience with different materials and processes. If you are someone who wants to help develop innovative, adaptive, flexible, creative approaches to design and manufacturing and develop unified solutions for lots of stakeholders then this role is for you.\n \n WHAT YOU'LL DO\n \n \n\n • Assist in the development, innovation, and creation of the manufacturing technology team's solutions for new machining and welding processes and technologies supporting product and factory development, the future production system creation, keeping lean manufacturing principles, integrated metrology and visual management top of mind, including technologies to improve production flow while enhancing product performance, space allocation and resource requirements across programs and products.\n, • Aid in product and production system design, and facility creation to ensure the most cost- and schedule-effective solutions for our factories that meets the needs of our products.\n, • Support design, construction, fabrication, and start-up of the production systems at new factory sites, ensuring successful delivery of the factory and products off the line.\n, • Provide recommendations based on your specific skill set in processes, materials, and technologies.\n, • Collaborate with product designers, manufacturing engineering, operations, facilities and construction, and environmental safety & health to deliver creative and effective production system designs, as well as external vendors supporting the design, construction, and commissioning of new facilities\n, • Experience in machining, fabrication, prototyping, and processes.\n, • Ability to work hands-on in a manufacturing environment, next to operations and manufacturing engineering to understand and optimize the production system.\n, • Must be a U.S. Person due to required access to U.S. export-controlled information or facilities\n, • Eligible to obtain and maintain an active U.S. Secret security clearance\n\n \n \nUS Salary Range\n \n \n$68,000-$90,000 USD\n \n \nThe salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: \n \n Benefits\n \n \nAt Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you're supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.\n \n Protecting Yourself from Recruitment Scams\n \n \nAnduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.\n \n \nTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:\n \n\n • No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.\n, • Please always verify communications:\n \n, • Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.\n, • Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to [email protected].\n \n, • Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.\n, • What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to [email protected]. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.\n\n \n Data Privacy\n \n \nTo view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/. \n \n \nBy submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n Welder/Fabricator, Maritime\n \n \nAnduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology.\n \n \nAnduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a real-time, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n ABOUT THE TEAM\n \nAnduril's Manufacturing Technology Team is seeking a Welder/Fabricator, Maritime to join our team. The Maritime Manufacturing Technology Team is responsible for rapidly developing and implementing manufacturing materials, technologies and processes for cutting-edge defense hardware, including deployable static and moving surface, undersea and sea to air vehicles and scaling these products in our new manufacturing facilities.\n \n ABOUT THE JOB\n \nAs a Welder/Fabricator, Maritime, you will be involved with fabricating prototypes and tooling that support the manufacturing development and assembly processes. Your skill set will be utilized to drive efficient, rapid, on-time production and start-up of the new production facilities for the new maritime vehicles. The right person for this role has a wealth of experience with different materials and processes. If you are someone who wants to help develop innovative, adaptive, flexible, creative approaches to design and manufacturing and develop unified solutions for lots of stakeholders then this role is for you.\n \n WHAT YOU'LL DO\n \n \n\n • Assist in the development, innovation, and creation of the manufacturing technology team's solutions for new machining and welding processes and technologies supporting product and factory development, the future production system creation, keeping lean manufacturing principles, integrated metrology and visual management top of mind, including technologies to improve production flow while enhancing product performance, space allocation and resource requirements across programs and products.\n, • Aid in product and production system design, and facility creation to ensure the most cost- and schedule-effective solutions for our factories that meets the needs of our products.\n, • Support design, construction, fabrication, and start-up of the production systems at new factory sites, ensuring successful delivery of the factory and products off the line.\n, • Provide recommendations based on your specific skill set in processes, materials, and technologies.\n, • Collaborate with product designers, manufacturing engineering, operations, facilities and construction, and environmental safety & health to deliver creative and effective production system designs, as well as external vendors supporting the design, construction, and commissioning of new facilities\n, • Experience in machining, fabrication, prototyping, and processes.\n, • Ability to work hands-on in a manufacturing environment, next to operations and manufacturing engineering to understand and optimize the production system.\n, • Must be a U.S. Person due to required access to U.S. export-controlled information or facilities\n, • Eligible to obtain and maintain an active U.S. Secret security clearance\n\n \n \nUS Salary Range\n \n \n$68,000-$90,000 USD\n \n \nThe salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: \n \n Benefits\n \n \nAt Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you're supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.\n \n Protecting Yourself from Recruitment Scams\n \n \nAnduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.\n \n \nTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:\n \n\n • No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.\n, • Please always verify communications:\n \n, • Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.\n, • Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to [email protected].\n \n, • Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.\n, • What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to [email protected]. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.\n\n \n Data Privacy\n \n \nTo view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/. \n \n \nBy submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.

Consolidated Precision Products (CPP), a manufacturer of highly complex aerospace castings is seeking a Welder to join the team at our plant in the City of Industry, CA location. We are looking for a motivated and driven individual that can drive execution in a diverse, challenging environment. Salary: $25.00 - $30.00 DOE and passing CPP Weld Test. ESSENTIAL JOB FUNCTIONS/DUTIES • Ability to weld by method of GTAW for rework, repair and cosmetic upgrade in accordance with customer specifications and internal procedures., • Evaluate castings to ensure preparation from prior operation is adequate., • Assess the condition of the castings to determine weld technique., • Perform additional weld preparation with the use of die and belt grinders., • Operate and maintain welding machines and equipment., • Ability to document weld locations and dimensions. Qualifications: • Education: High School Diploma or General Education Degree (GED); Weld Test Meets AWS D17.1 with weld thickness, • Experience: Formal training or classes a plus., • Certifications/Licenses: Must successfully complete CPP ISO Procedures: Manufacturing 500, 501 and 502. Obtain and maintain NADCAP certifications on all assigned alloys (stainless steel and Aluminum)., • Other Required Knowledge, Skills & Abilities: LANGUAGE SKILLS - Ability to read, understand and comprehend documents such as safety rules, operating and maintenance instructions, simple drawings, procedure manuals and Internal Method Sheets (IMS)., • Ability to speak effectively and interact with other team members, engineers and leadership. MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to deal with problems involving several concrete variables in standardized situations. REASONING ABILITY - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a full time position Pay Range: $25.00 - $30.00

Job Description We are seeking an experienced and driven Staff Mechanical Engineer who thrives in a fast-paced startup environment. You will take ownership of the end-to-end development of mission-critical mechanical and thermal systems, from blank-page concept through analysis, fabrication, and final testing. You will tackle extreme engineering challenges, including high-temperature systems with complex power electronic interfaces while mentoring junior engineers and driving projects across the finish line. Key Responsibilities • Lead the design, analysis, and manufacturing of complex mechanical and thermal hardware., • Architect and design systems from the ground up using SolidWorks, ensuring robust application of GD&T., • Conduct advanced structural (FEA) and thermal (COMSOL) analyses on systems operating in extreme environments (up to 1500°C)., • Design custom steel and aluminum weldments, overseeing their fabrication and quality., • Architect and implement data acquisition (DAQ) systems and instrumentation to validate prototype performance., • Act as a technical authority for DFM/DFA, frequently utilizing hands-on fabrication skills (welding, machining) to iterate rapidly., • Take full ownership of project life cycles, navigating the ambiguities of a startup environment to deliver hardware on tight timelines. Basic Qualifications • Bachelor's degree in mechanical engineering., • 5+ years of professional design and/or hands-on manufacturing experience., • Prior experience in a startup or highly dynamic engineering environment. Preferred Skills and Experience • Master's degree in mechanical engineering or other comparable engineering disciplines., • Experience working with contract manufacturers., • Understanding and proper application of GD&T., • Experience with CAD (SolidWorks)., • Experience performing finite element analysis (FEA)., • Experience performing thermal analysis (COMSOL)., • Experience with steel and/or aluminum weldment design and analysis., • Experience with high-temperature (up to 1500°C) system design and analysis., • Hands-on design, design for manufacturability (DFM), and fabrication experience., • Experience with common fabrication methods and tools (welder, router, mill, lathe, hand tools, etc.)., • Data acquisition and instrumentation experience (thermocouples, pressure sensors, electrical sensors, flow sensors, oxygen sensors, etc…)., • Demonstrated ability to drive projects to completion. Compensation Range The US base salary range for this full-time position is $186,000 to $206,900 + equity + benefits. Our salary ranges are determined by role, level, and location. Within the range, individual pay is determined by additional factors, including job-related skills, experience, location, and relevant education or training. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include equity or benefits.

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n ABOUT THE TEAM\n \n \nAnduril's Maritime Manufacturing Technology Team is responsible for rapidly developing and implementing manufacturing technologies, processes, and materials for cutting-edge defense hardware. The team is developing deployable static and moving surfaces, undersea and sea to air vehicles, and scaling these products in our new manufacturing facilities.\n ABOUT THE JOB\n \n \nWe are seeking an experienced Cutting/Fabrication Technician to join the team working in a cutting-edge production environment to advance the state-of-the-possible in maritime manufacturing. You will play a key role in delivering our products to our customers by working hands-on with our engineering team on a multi-disciplinary workflow. This role will include fabricating high-quality parts in a cutting-edge production system as well as building assemblies to support the production floor.\n WHAT YOU'LL DO\n \n\n • Read and interpret technical drawings and CAD models.\n, • Program/set-up/operate CNC water jets, oxy-acetylene cutters, plasma cutters, and shears.\n, • Design/spec out and implement various work holding and fixture methods.\n, • Troubleshoot issues and make adjustments during the manufacturing process.\n, • Perform quality control both during and at completion of the manufacturing process.\n, • Help lead the organization, machine maintenance and cleanliness of the work area.\nREQUIRED QUALIFICATIONS\n \n\n • 5+ years' experience as a cutting/fabrication technician.\n, • Experience with CAD software like Siemens NX (Unigraphics).\n, • Experience with CNC water jets, oxy-acetylene, and plasma machines.\n, • Experience with manual cutting and grinding tools (hand-grinders, plasma torches, etc.).\n, • Experience with Fanuc, Omax, and Siemens controls.\n, • High level of familiarity with various alloys, metals, plastics, etc.\n, • Knowledgeable in Geometric Dimensioning and Tolerancing (GD&T).\n, • Proficient in using precision measuring tools (calipers, micrometers, protractors, tape measures).\n, • Can own the completion of an assigned manufacturing task from start to finish.\n, • Ability to flex between R&D fabrication and production tasks.\n, • Able and willing to jump in on production assembly integration tasks as needed.\n, • Ability to lift up to 50 lbs unassisted.\n, • Eligible to obtain and maintain an active U.S. Secret security clearance.\nPREFERRED QUALIFICATIONS\n \n\n • Experience working with exotic materials like Inconel, Monel, Titanium, and HY-80 up to 4-6" thick.\n, • General fabrication experience (shearing, forming, welding).\n, • Experience using CAM software.\n, • Prior work with architecture and infrastructure engineering partners and/or general contractors to build, improve or modify machining systems.\n, • Hobbyist fabricator, welder, builder.\n\n \n \nUS Hourly Range \n \n \n$37.02-$49.04 USD\n \n \nThe salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: \n \n Benefits\n \n \nAt Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you're supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.\n \n Protecting Yourself from Recruitment Scams\n \n \nAnduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.\n \n \nTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:\n \n\n • No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.\n, • Please always verify communications:\n \n, • Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.\n, • Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to [email protected].\n \n, • Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.\n, • What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to [email protected]. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.\n\n \n Data Privacy\n \n \nTo view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/. \n \n \nBy submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.

Job Description Responsabilities: -Setup new production test areas, including layouts, tooling and equipment setup, etc. · Assist with transition from development to production, including first articles · TIG welding according to engineering models, drawings, specifications and written procedures · Brazing according to ASME IX III · Interface with production leads, supervisors, manager and QA inspection to ensure timely customer delivery · Troubleshoot, diagnose, and correct discrepancies by modification, rework, repair, and/or maintenance. Perform root cause analysis and implement corrective actions for recurrence control · Setup and operate precision calibrated tools including but limited to, TIG welding machine, brazing setup, gas tanks, lines, regulators, digital and mechanical gauges, instruments etc. · Diagnose non-functional welded assemblies independently · Calibrate and test DPU assemblies per engineering procedure independently · Identify and implement continuous improvement projects for area safety and efficiency · Perform routine maintenance functions such as daily clean-up of work areas to support 6S and Lean initiatives · Learn quickly from mistakes, absorb knowledge from mentors, take ownership, cross-train others and deliver results · Other duties as assigned or otherwise beneficial to achieving organizational success Qualifications: · High School diploma or GED · D17.1 and D14.1 certifications · Experience with mechanical assembly and gauge calibration · 3-5 years direct experience in industrial manufacturing, integration, or another relevant field · Ability to work effectively with a strong work ethic and close attention to detail in a fast-paced dynamic team environment with rapidly changing roles and responsibilities · Ability to interpret engineering models, drawings, specifications, written work instructions, and test procedures · Basic mathematics skills · Hand dexterity required to assemble small mechanical or electrical components · Basic computer skills such as Windows, Microsoft Office, etc. · Strong verbal and written communication skills · Ability to climb ladders/stairs and work in small restricted areas · Ability to lift heavy items up to 44 lbs. if needed · Work off-shift, extended hours overtime, and weekends if/when necessary · Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Desired: · Industry certification, trade school training and/or degree in related field · Experienced in a team-based Lean Manufacturing environment · Bilingual (English/Spanish) Schedule · 05:00 – 13:30 with overtime and weekend hours as needed ALL APPLICANTS FOR U.S. ROLES MUST CAREFULLY READ ALL THE SUPPLEMENTAL U.S. SPECIFIC INFORMATION LISTED BELOW. SLB is committed to a culture where everyone feels like they belong. To learn more about our diversity, equity, and inclusion commitments, please visit our Diversity & Inclusion | SLB (slb.com) page for more information. When certifying your application, you are also certifying on reading and understanding all of the below supplemental information. For purposes of the application and the below information, Company shall be defined to mean SLB. Please note that the below supplemental information and the employment application are NOT a contract. \nCompany Description In July 2024, WestRock and Smurfit Kappa merged to become Smurfit Westrock, a global leader in sustainable packaging. Smurfit Westrock operates in 40 countries with 500+ production facilities worldwide and 100,000+ team members. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts, using leading science and technology to drive innovation in packaging. As a trusted partner to companies across the world, Smurfit Westrock is dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges.

Auto Body Technician $22/hr-$26/hr Depending on Experience Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Be a part of a rapidly growing company whose mission is to put safety, quality, integrity, and heart into every vehicle we repair and customer we serve. Classic Collision offers competitive pay, benefits, and career advancement opportunities. Please come and join our team! Why Choose Classic Collision? • Paid Weekly, • Continuous Training, • Supportive Team Culture, • Company match 401K, • Medical/Dental/Vision, • Paid Time Off - 6 Paid Holidays, • Rewarding Work Responsibilities • Complete disassembly of vehicle to assist Collision Estimators in assessing damage to prepare a 100% Repair Plan, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Plan work procedure: follow work order for all operations listed, • Remove upholstery, accessories, electrical and hydraulic windows, and seat operating equipment to gain access to damaged area of vehicle if needed. Store parts on carts or cover to eliminate potential damage, • Mend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged panels and bolts or welds replacement parts in position and reassemble after parts are painted, • Operate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.), • File, grind, and sand repaired surfaces before turning vehicle over to the Paint Dept., • Repair or replace defective parts, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Inspect and test drive repaired vehicles to check for compliance with safety and quality standards, • Perform other related duties as assigned, • Comply with all Classic Collision standard operating procedures, safety, rules, and guidelines Qualifications • Must be at least 18 years of age, • I-CAR / ASE certifications preferred, • 2-3 years’ collision repair experience preferred, • Valid Driver's License Required, • Customer-focused attitude with the ability to work well in a team environment, • Ability to read and comprehend written instructions and information, • Successful completion of background check required Behaviors/Competencies: • Integrity-Respect and accountability at every level and every interaction, • Customer Service-Provide the highest level of customer service while building customer satisfaction and retention, • Innovation-Develops and displays innovative approaches and ideas to our business, • Teamwork-Contributes to building a positive team spirit and supports everyone’s efforts to succeed Physical & Environmental While performing the duties of this job, the employee is regularly required to use hands, and is required to talk and hear. The employee is frequently required to stand, sit, and walk occasionally for long periods at a time. The employee may occasionally be required to reach with hands, arms and move objects up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and ability to adjust focus. In addition, abilities for assessing the accuracy, neatness and thoroughness of the work assigned is required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential function. Classic Collision is an Equal Opportunity Employer: As an equal opportunity employer, Classic Collision does not discriminate against any employee or candidate based on age, race, gender identity, gender expression, genetic information, national origin, physical or mental disability, protected veteran status, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by all applicable federal, state, and local laws. Reasonable Accommodations: Classic Collision is an equal opportunity employer that is committed to working with and providing reasonable accommodations to individual with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or submit an online application, please e-mail recruiting@classiccollision.com or call (470)500-6808. This email and phone number are listed exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. This job description is not a complete statement of all duties and responsibilities comprising the position. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job DescriptionJob Summary The Shop Quality Supervisor plans, directs, performs, and supervises company quality control functions and activities. Essential Functions • Actively support the Company’s commitment to safety and its “Core Values.”, • Represents the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”, • Provides specialized technical expertise in support of the Quality program, including specialized inspection and testing techniques, quality training, statistical methods, audits, quality tools for problem solving and assessment., • Perform and report on NDE inspections and testing activities., • Coordinate 3rd party inspections and review reports for accuracy and compliance with project requirements., • Prepare, organize, and submit weld maps, record drawings, and final turnover packages., • Plan, conduct, and document Welder Performance Qualification Testing., • Maintain shop at an “Audit Ready” condition at all times for certification programs, including ASME and AISC., • Maintain NCR site and associated activities to provide accurate data to management., • Act as liaison for customer inspectors or customer representatives that visit the shop location., • Apply knowledge of quality systems and tools to validate and verify contractually required standards for project execution., • Maintain presence on shop floor and address quality and safety issues., • Manage measuring and test equipment calibration activities and storage., • Perform Quality training to shop personnel, as needed., • Responsible for maintaining quality standard of products and the procedures and materials that go into work scope. Aligns quality management function with the performance needs of product lines., • Actively participate in issue resolution and continuous improvement activities., • Establishes priorities for the completion of assigned tasks. Uses judgment to interpret internal and external issues and develop best practices. May direct resources, prioritize tasks, and provide guidance to less experienced team members., • Relies upon experience, interpersonal skills, and broad knowledge of field to ensure task completion in compliance with policies, procedures, and business strategy., • Perform other duties, as assigned.Qualifications, • AWS Certified Welding Inspector (CWI) is required., • LA City Dept of Building and Safety “Quality Control Inspector” certification is preferred., • 5+ years related experience in QA/QC., • Current certification in a related discipline specific inspection process (e.g. ASNT Level II, NACE etc.) preferred., • Thorough working knowledge of regulatory agency quality assurance and quality control activities., • Experience must have been in steel fabrication. ., • Proven ability to supervise personnel and excellent verbal and written communication skills required., • Advance degree or training is desirable., • Strong oral, written, and interpersonal communication skills., • Must be proficient in computer skills including use of Microsoft Office products. California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range. Hiring range: $35.00 per hour to $44.00 per hour Follow us at Matrix Service Company to view all of our open positions and for the latest news about our operating companies and our teams. In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance. Some employees may also be eligible for paid time off, tuition reimbursement and a performance or safety bonus program. At Matrix, we are dedicated to building a culture of engagement, respect, collaboration and teamwork. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets Employer We are an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category. Applicants must be currently authorized to work in the United States on a full-time basis.

We are seeking an experienced TIG & Laser Welder to join a production team in El Monte, CA.

We are seeking an experienced TIG & Laser Welder to join a production team in El Monte, CA.

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n ABOUT THE TEAM\n \n \nAnduril's Maritime Manufacturing Technology Team is responsible for rapidly developing and implementing manufacturing technologies, processes, and materials for cutting-edge defense hardware. The team is developing deployable static and moving surfaces, undersea and sea to air vehicles, and scaling these products in our new manufacturing facilities.\n ABOUT THE JOB\n \n \nWe are seeking an experienced Cutting/Fabrication Technician to join the team working in a cutting-edge production environment to advance the state-of-the-possible in maritime manufacturing. You will play a key role in delivering our products to our customers by working hands-on with our engineering team on a multi-disciplinary workflow. This role will include fabricating high-quality parts in a cutting-edge production system as well as building assemblies to support the production floor.\n WHAT YOU'LL DO\n \n\n • Read and interpret technical drawings and CAD models.\n, • Program/set-up/operate CNC water jets, oxy-acetylene cutters, plasma cutters, and shears.\n, • Design/spec out and implement various work holding and fixture methods.\n, • Troubleshoot issues and make adjustments during the manufacturing process.\n, • Perform quality control both during and at completion of the manufacturing process.\n, • Help lead the organization, machine maintenance and cleanliness of the work area.\nREQUIRED QUALIFICATIONS\n \n\n • 5+ years' experience as a cutting/fabrication technician.\n, • Experience with CAD software like Siemens NX (Unigraphics).\n, • Experience with CNC water jets, oxy-acetylene, and plasma machines.\n, • Experience with manual cutting and grinding tools (hand-grinders, plasma torches, etc.).\n, • Experience with Fanuc, Omax, and Siemens controls.\n, • High level of familiarity with various alloys, metals, plastics, etc.\n, • Knowledgeable in Geometric Dimensioning and Tolerancing (GD&T).\n, • Proficient in using precision measuring tools (calipers, micrometers, protractors, tape measures).\n, • Can own the completion of an assigned manufacturing task from start to finish.\n, • Ability to flex between R&D fabrication and production tasks.\n, • Able and willing to jump in on production assembly integration tasks as needed.\n, • Ability to lift up to 50 lbs unassisted.\n, • Eligible to obtain and maintain an active U.S. Secret security clearance.\nPREFERRED QUALIFICATIONS\n \n\n • Experience working with exotic materials like Inconel, Monel, Titanium, and HY-80 up to 4-6" thick.\n, • General fabrication experience (shearing, forming, welding).\n, • Experience using CAM software.\n, • Prior work with architecture and infrastructure engineering partners and/or general contractors to build, improve or modify machining systems.\n, • Hobbyist fabricator, welder, builder.\n\n \n \nUS Hourly Range \n \n \n$37.02-$49.04 USD\n \n \nThe salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: \n \n Benefits\n \n \nAt Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you're supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.\n \n Protecting Yourself from Recruitment Scams\n \n \nAnduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.\n \n \nTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:\n \n\n • No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.\n, • Please always verify communications:\n \n, • Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.\n, • Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to [email protected].\n \n, • Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.\n, • What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to [email protected]. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.\n\n \n Data Privacy\n \n \nTo view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/. \n \n \nBy submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.

Job Description Labor One is hiring Firewatch for a shipyard in San Diego, California. Please contact our team for more information! Cell: (619)657-5507 , (858)717-1672, or (619)484-7267 • Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Summary • Observes for sparks and flames during welding and works as a laborer to assist trades; sweeps, hoses and performs tasks related to clean up on-board ship, in drydock, on piers and throughout the shipyard., • Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards • High school graduate or GED with prior experience preferred., • Ability to read and write (in English) and understand verbal instructions required., • Requires observation skills, ability to respond quickly, housekeeping skills, good judgement and on-going safety awareness., • Must be able to access and move around ship safely, work at heights and in confined areas with limited visibility., • Must be clean shaven for respirator fit (modest mustache is fine). Essential Job Tasks • Assists in setting up equipment, including helping the welder running leads, hoses, operation of air an electric power tools; moves metal pieces for re-fitting; removes scrap from work area., • Moves fire bottle to areas of work; observes for sparks from welding and grinding;extinguishes fire when necessary., • Maintains a clean, hazard-free work area., • Sorts, inspects and stacks lumber and metal scaffold components. Materials, Tools Equipment, Work Aids Fire retardant material, hoses, leads, cleaning equipment and supplies, lights, fire bottle. Metal, wood, scaffold sub-section, bolts, clips, hand tools, cable lines and rope lines. Physical/Mental Involvement Lifting/carrying of objects weighing up to 50 lbs.; standing, walking, climbing/balancing, pushing/pulling, kneeling, crawling, stooping, crouching, reaching, handling, fingering, eye/hand/foot coordination, seeing, hearing and speaking. Understanding written and verbal directions, recognizing and avoiding potential safety hazards, following established procedures. Marginal Job Tasks None identified. Environmental Factors Works 50% of the time inside, 50% outside, on board ship, drydock, balanced on scaffolding in shipyard. Exposed to wind, heat, constant wet and humid conditions, vibrations; works near constantly moving machinery, mechanical parts and traffic from other trades. Exposed to fumes, odors, dust, toxic or caustic chemicals. Exposed to constant loud machinery noise. Labor One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Firewatch for a shipyard in San Diego, California. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 • Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Summary • Observes for sparks and flames during welding and works as a laborer to assist trades; sweeps, hoses and performs tasks related to clean up on-board ship, in drydock, on piers and throughout the shipyard., • Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards • High school graduate or GED with prior experience preferred., • Ability to read and write (in English) and understand verbal instructions required., • Requires observation skills, ability to respond quickly, housekeeping skills, good judgement and on-going safety awareness., • Must be able to access and move around ship safely, work at heights and in confined areas with limited visibility., • Must be clean shaven for respirator fit (modest mustache is fine). Essential Job Tasks • Assists in setting up equipment, including helping the welder running leads, hoses, operation of air an electric power tools; moves metal pieces for re-fitting; removes scrap from work area., • Moves fire bottle to areas of work; observes for sparks from welding and grinding;extinguishes fire when necessary., • Maintains a clean, hazard-free work area., • Sorts, inspects and stacks lumber and metal scaffold components. Materials, Tools Equipment, Work Aids Fire retardant material, hoses, leads, cleaning equipment and supplies, lights, fire bottle. Metal, wood, scaffold sub-section, bolts, clips, hand tools, cable lines and rope lines. Physical/Mental Involvement Lifting/carrying of objects weighing up to 50 lbs.; standing, walking, climbing/balancing, pushing/pulling, kneeling, crawling, stooping, crouching, reaching, handling, fingering, eye/hand/foot coordination, seeing, hearing and speaking. Understanding written and verbal directions, recognizing and avoiding potential safety hazards, following established procedures. Marginal Job Tasks None identified. Environmental Factors Works 50% of the time inside, 50% outside, on board ship, drydock, balanced on scaffolding in shipyard. Exposed to wind, heat, constant wet and humid conditions, vibrations; works near constantly moving machinery, mechanical parts and traffic from other trades. Exposed to fumes, odors, dust, toxic or caustic chemicals. Exposed to constant loud machinery noise. Labor One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionNorchem CorporationPosition Overview Norchem is seeking a dependable, mechanically inclined Manufacturing Trainee to join our automated systems manufacturing team. This entry-level position combines daily shop support with hands-on training in metal fabrication, welding, and electrical control panel assembly for engineered water systems. This individual will eventually develop into a Stainless Steel Welder/Fabricator or Electrical Panel Builder, based on demonstrated skills, interests, and company needs. You will work alongside experienced shop personnel, learning safe work practices, quality standards, and the technical skills needed to take on increasingly independent work. Location: Bell Gardens, CA Schedule: Monday-Friday, 6:00 AM to 2:30 PM (overtime eligible as needed). Benefits Include: • Medical, Dental Vision and Life Insurance (94–100% of employee premiums covered on select plans), • 401(k) pre-tax/ROTH plans with Employer Safe Harbor Match, • PTO and STO, • Federal Holidays, • Company Work Uniforms, • Expense reimbursement for work bootsWhat You'll Do, • Support fabricators and panel builders by preparing materials, staging components, and keeping tools and work areas organized., • Measure, mark, cut, drill, grind, and deburr metal under supervision., • Learn weld prep, fit-up, finishing, and welding techniques through hands-on instruction and practice., • Help assemble control panels: mount components, install wire duct and DIN rail, prepare labels, and route and terminate wires as your training progresses., • Learn to read shop drawings, electrical schematics, bills of materials, and assembly instructions., • Help with mechanical assembly of equipment, frames, enclosures, and related components., • Receive, identify, organize, and track materials and parts, and flag shortages or discrepancies., • Check your work for accuracy and quality, and report defects or mistakes right away., • Keep the shop clean and organized, wear required PPE, and operate equipment safely., • Perform only tasks you've been trained and authorized for. Electrical testing and energized work stay with qualified personnel.What You Bring, • Interest in building a career in welding, metal fabrication, or electrical panel assembly, • Mechanical aptitude and comfort with hand tools, • Basic math skills and the ability to measure accurately, • Strong attention to detail and reliable attendance, • Willingness to follow instructions, take feedback, and ask questions, • Ability to work well as part of a team, • Ability to stand, bend, and handle materials throughout the shift, with reasonable accommodation as needed Helpful but not required: previous shop experience, trade school coursework, or exposure to welding, automotive repair, construction, or electrical work. Training and Career Development Training starts with shop safety, tool use, material preparation, and basic assembly. As your skills develop, you'll take on more technical work in both fabrication and panel building. From here, you can grow into one of two roles: • Metal Fabricator: drawing interpretation, material layout, cutting, fit-up, welding, finishing, and dimensional inspection., • Electrical Panel Builder: schematic interpretation, component layout and mounting, wire preparation and termination, labeling, and assembly quality checks. Advancement depends on safe work habits, reliability, workmanship, demonstrated skill, and available opportunities. What Success Looks Like You help keep the shop prepared and productive, complete your work carefully, and keep building new skills. Over time, you handle defined fabrication or panel assembly tasks with less supervision while keeping quality and safety consistent. By submitting this application, I understand and consent to a drug screen, which may include testing for various substances, for employment purposes. I understand that refusing to submit to a drug screen may result in the withdrawal of my application or employment offer. I also understand that the results will be kept confidential and only shared with authorized personnel. By submitting this application, I understand and consent to a background check, which may include criminal history, employment verification, and other relevant information, for employment purposes. I understand that refusing to consent to a background check may result in the withdrawal of my application or employment offer. I also understand that I have the right to request a copy of the background check report.

Job DescriptionJob Title: TIG WelderJob Description The TIG Welder will perform precision welding on a wide range of components, from small medical devices to complex aerospace products. This role focuses primarily on stainless steel, with regular work on mild (carbon) steel and occasional aluminum welding. The welder will interpret blueprints, prepare and fit metal components, and ensure high-quality welds throughout the production process in an industrial shop environment. Responsibilities • Interpret and follow blueprints to arrange metal pieces and position components accurately before TIG welding., • Perform TIG welding in multiple positions, including flat, horizontal, and vertical, on stainless steel, carbon steel, and occasionally aluminum., • Safely set up and operate TIG welding machines and other shop equipment in accordance with safety procedures., • Match work orders to the correct components and verify that materials and specifications align with job requirements., • Conduct continuous quality inspections during the production process to ensure welds and finished parts meet specifications., • Process and complete all required production and quality documentation accurately and on time., • Weld, grind, and polish metal components to meet detailed component and finish specifications., • Maintain a safe, clean, and organized work area, following all safety guidelines and using appropriate protective equipment.Essential Skills, • Proficient TIG welding skills, particularly on stainless steel and mild (carbon) steel., • Ability to read and interpret blueprints and technical drawings., • Experience in metal fabrication, including fitting and preparing components for welding., • Capability to weld in flat, horizontal, and vertical positions., • Skill in grinding and polishing metals to meet component specifications., • Strong attention to detail and commitment to completing thorough quality inspections., • Ability to safely set up and operate welding machines and related shop equipment., • Competence in matching work orders to components and following production instructions accurately.Additional Skills & Qualifications, • Experience working with aluminum using TIG welding is a strong plus., • MIG welding experience is a plus, even though formal certification is not required., • Familiarity with documenting production and quality activities in a manufacturing environment., • Comfort working with a variety of metals and adapting welding techniques to different materials.Why Work Here? Join a hands-on industrial environment where craftsmanship, precision, and safety are highly valued. You will work on diverse and interesting projects, ranging from small, intricate components to complex, high-performance products, offering continuous opportunities to refine and expand your welding skills. The team-oriented shop culture encourages collaboration, professional growth, and pride in producing high-quality work. Work Environment The role is based in a dirty, industrial shop environment that can be loud when machines are running. This is a physically demanding position that requires standing for long periods, lifting heavy equipment, and consistently wearing and using appropriate safety gear. You will work around active machinery, welding equipment, and metal fabrication tools, following established safety protocols and maintaining a clean, organized workspace. Job Type & Location This is a Contract to Hire position based out of Newark, CA. Pay and Benefits The pay range for this position is $25.00 - $34.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Newark,CA. Application Deadline This position is anticipated to close on Oct 15, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description The Level 3 welder has a deeper understanding of the Welder 1, Welder 2 positions and job descriptions. He/She is one that works with little to no supervision, and has over seven years of experience in the trade. Ability to identify and repair flaws in most metal objects at an advanced level. Frequently analyzing and solving advanced problems. Advanced knowledge of weld symbols and print interpretation Advanced level of MIG & TIG Ability to weld all types of alloys Ability to fabricate from start to finish Advanced knowledge of robot programming FIRST SHIFT 5AM – 1:30PM M-F SECOND SHIFT 1:20PM – 9:50PM M-F

This worker welds metal parts together using both gas welding or brazing and any combination of arc welding processes performs related tasks such as thermal cutting and grinding repairs broken or cracked parts fills holes and increases size of metal parts positions and clamps together components of

Job DescriptionWelder and Fabrication Technician (1st Shift) Project Length: 3-month project (contract) Pay: $40 (DOE) Schedule: 5:00 AM to 2:30 PM (Mon to Fri and OT) Location: Long Beach, CA Position Summary Kimco Staffing is seeking experienced Welders / Fabrication Technicians to support a short-term manufacturing surge. Candidates should be able to work independently in a fast-paced environment and collaborate with Engineering to build and improve tooling. Key Responsibilities • Fabricate and weld tooling and steel components (Flux Core/FCAW), • Fit, prep, and clean materials prior to welding; set up welding equipment and jig tables, • Inspect parts for dimensional accuracy and weld quality; identify defects and perform repairs, • Support process improvements and troubleshoot tooling/design issues with Engineering, • Operate fabrication equipment (vertical band saws, grinders/sanders); maintain safe, clean workspaceQualifications, • 3+ years welding/metal fabrication experience, • Strong Flux Core (FCAW) on steel experience, • Blueprint/fabrication drawing interpretation, • Experience with tooling/fixture fabrication preferred, • Quality inspection capability; mechanical aptitude; ability to meet aggressive schedulesCompliance (ITAR) This role is subject to ITARPandoLogic. Keywords: Fabrication Technician, Location: Long Beach, CA - 90833 , PL: 604495381

Job Description Job Title: Assembler Location: Chino, CA Shift: Monday – Friday, 5:30am – 2:00pm Pay Range: $17.00hr - $18.00hr Responsibilities: • Feeding materials (30lbs) into robot welder machines, • Operate the controls of the robot weld machine, • Rotate through tasks for specific production processes, • Conduct quality inspections on products and parts, • Prepare finished products for shipment, • Maintain a clean and orderly work area Qualifications: • Must be able to stand for long periods of time, • Must be able to lift up to 30lbs, • Previous experience in manufacturing, assembly, or other related fields, • Familiarity with assembly tools and equipment, • Ability to handle physical workload, • Ability to work well in teams, • Ability to thrive in a fast-paced environment

Job Description Description The welder performs duties in the steel fabrication shop related to all elements of steel fabrication, welding, and repair. Duties primarily involve welding processes but also include operating basic hand tools, component assembly, operating metal fabrication equipment, repair work, and painting. Essential Responsibilities • Perform welding operations using several welding processes including: GMAW., • Operate basic hand tools and powered hand tools, i.e. drills, disc grinders, etc., • Operate equipment as described in company procedures: metal cutting saws, cutting torches, drills, material handling equipment, and grinders., • Perform repair work involving welding and assembly., • Operate basic paint equipment., • Perform work safely and comply with all applicable safety regulations, rules, policies and procedures., • Perform housekeeping duties to maintain a clean, safe and organized work space., • Maintain collaborative working relationship with coworkers., • Perform general tasks as assigned by Supervisor., • Accurately complete assembly sheets., • Supports the Quality and Safety programs. Knowledge, Skills & Abilities Knowledge of: • Welding and fabrication principles and practices., • Tools, equipment and systems used in the practice of welding and fabrication., • Federal, state and local job site health and safety rules, regulations and best practices. Ability to: • Interpret shop drawings., • Think independently and creatively to problem solve., • Take initiative, self-manage time and production through multi-tasking., • Effectively and concisely communicate both orally and in writing., • Contribute to a team dynamic by promoting inclusion, support and collaboration amongst coworkers., • Maintain a positive attitude with coworkers., • Proactively establish trust and credibility with coworkers by maintaining accountability. Education, Training & Experience • Two years related welding and fabricating experience., • Experiences in the resource recovery industry a plus., • Certifications in welding processes a plus.Supplemental Information Universal Waste Systems celebrates diversity and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job Description Job Title: Stainless Steel Welder / Fabricator Location: Paso Robles, California Department: Fabrication / Welding Reports To: Shop Supervisor Job Type: Full-Time Work Schedule: Monday–Thursday, 6:00 AM – 4:30 PM (4/10-hour shifts) Pay Range: $41,600 – $70,000 annually, DOE Job Summary We are currently seeking a skilled Stainless-Steel Welder / Fabricator to join our fabrication team in Paso Robles, CA. This position is responsible for welding and assembling components used in the construction of carbon and stainless-steel tanks. The ideal candidate has strong blueprint interpretation skills, welding proficiency across multiple positions, and experience working with both stainless and carbon steel in a manufacturing environment. Essential Duties and Responsibilities • Read and interpret blueprints and fabrication drawings to determine job requirements., • Weld components in flat, vertical, horizontal, and overhead positions., • Perform grinding, dressing, and finishing of welds to meet required specifications., • Operate overhead cranes, forklifts, and material handling equipment safely and efficiently., • Utilize a range of fabrication tools including welders, plasma cutters, torches, shears, punches, and power tools., • Fabricate, assemble, and modify parts using stainless steel and carbon steel materials., • Perform cutting, brazing, grinding, and layout per production needs., • Ensure welds meet quality standards through self-inspection and rework if necessary., • Maintain a safe, clean, and organized work environment in compliance with shop safety procedures. Qualifications Required Education and Experience • Minimum of 2 years welding experience in a manufacturing or construction environment., • Valid Driver’s License. Preferred Qualifications • Experience operating forklifts and overhead cranes., • Familiarity with both MIG and TIG welding processes., • Prior work with stainless steel tanks or industrial fabrication projects is a plus. Skills and Competencies • Proficient in all welding positions and fabrication techniques., • Ability to interpret blueprints and technical drawings., • Strong problem-solving and critical-thinking abilities., • Good communication and teamwork skills., • Attention to detail and quality assurance in all tasks. Work Environment This position operates in a fabrication shop and industrial manufacturing environment. Conditions include: • Exposure to loud noise, welding fumes, grinding sparks, and heavy machinery., • Use of personal protective equipment (PPE) is mandatory, including:, • Safety glasses with side shields, • Hearing protection, • Welding hoods and gloves, • Steel toe boots (required), • Work areas may be dusty, hot, or physically demanding depending on project phase. Physical Requirements • Must be able to stand, bend, reach, and walk for prolonged periods throughout the shift., • Ability to lift and carry up to 50 lbs using safe lifting techniques., • May be required to reach above shoulder height or below waist to store or retrieve items. Travel Requirements • No regular travel required for this position. Compensation and Benefits • Medical, Dental, and Vision Insurance, • Life Insurance, • Paid Sick Leave and Holiday Pay, • 401(k) with Roth Option, • Aflac Supplemental Insurance AAP/EEO Statement We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, veteran status, or disability. Other Duties This job description outlines the general responsibilities and duties of the position. Additional tasks may be assigned as needed to meet production and business needs.

Job DescriptionDescription: POSITION SUMMARY At Urban Workshop we are expanding business-to-business sales effort for our AWS (American Welding Society) and LADBS welder training and certification testing and are seeking a high-energy, results-driven Salesperson to lead the charge in enrolling business welding teams into our training and certification programs and establishing long-term partnerships. This role is perfect for someone who thrives in a performance driven culture, has a deep understanding of the sales process, and is passionate about helping businesses upgrade their teams to grow their businesses. ABOUT URBAN WORKSHOP Urban Workshop is the only American Welding Society Accredited Test facility in LA and Orange County, as well as an LADBS approved welder certification site, giving us a distinct competitive advantage over all other welder training and certification companies in Southern California. Our mission is to make short-duration focused education with shared access to tools in a supportive environment the preferred method for visionary individuals to get what they need to go out and change the world. Our core values are the back bone of our business and guide our hiring process: unimpeachable character, results driven, sincere candor, continuous learning, inspirational, and visionary. SUCCESS LOOKS LIKE • Providing an outstanding client engagement experience by quickly understanding key pain points and moving them through our client lifecycle., • Communicating to clients how welder certification gives them a competitive advantage, saves money, and reduces risk so they grow and scale their businesses., • Works well with other departments to ensure sold clients schedule and show for events., • Prioritizing clients who can move swiftly through the sales cycle, maximizing opportunities for revenue growth. OBJECTIVES • Drive qualified leads from initial outreach, quoting, welder evaluations thru to enrollment., • Conduct high impact sales calls with business owners and managers, understanding their goals, pain points, and opportunities., • Present and sell the value of Urban Workshop programs and the ecosystem with conviction and precision., • Follow up rigorously to close leads into educational and certification programs., • Collaborate with marketing, event, and operations teams to optimize lead flow, communication, and conversion., • Maintain accurate records in Hubspot CRM (calls, connects, appointments, etc) to ensure visibility and accountability., • Represent Urban Workshop’s brand and mission at events and virtual sessions with excellence., • Maintain a minimum of 100 calls and daily outbound activity., • Meet a monthly revenue quota through during and post evaluation conversions., • Mastery of Urban Workshop’s sales scripts, frameworks and process., • Build and maintain a robust referral pipeline within the welding ecosystem., • Contribute to the continuous improvement of sales processes and messaging., • Represent Urban Workshop’s values and results driven culture in all interactions. COMPETENCIES • Demonstrates expert-level communication, persuasion, and closing ability., • Reads people, adapts quickly, and builds trust with business owners., • Thrives under pressure; bounces back from rejection quickly., • Deeply understands Urban Workshop’s programs and value propositions., • Understands the welding industry, and Urban Workshop’s value proposition and the challenges of scaling welding service businesses., • Obsessed with achieving and exceeding targets., • Owns daily metrics and follows through relentlessly., • Works seamlessly with marketing, sales, events, and leadership teams., • Accepts feedback and applies it with speed and precision. EDUCATION AND EXPERIENCE • Proven success in consultative or high-ticket sales, ideally in business consulting, events, or education., • Experience selling to contractors, trades, or service-based business owners (welding experience preferred)., • Exceptional communication and interpersonal skills., • Thrives in a high-performance environment with daily, weekly, and monthly targets. PHYSICAL REQUIREMENTS • Prolonged periods sitting at a desk and working on a computer COMPENSATION AND PERKS • Projected total annual compensation between $70,000 and $120,000. Benefits include medical insurance, 401(K) w/ 3% match, 2 weeks paid vacation, 2 volunteer days, pet insurance, internal training discounts, tuition reimbursement, and the opportunity to work with an amazing group of peers and members. COMMITMENT TO DIVERSITY As an equal opportunity employer committed to meeting the needs of a multigenerational and multicultural workforce Urban Workshop recognizes that a diverse staff, reflective of our community, is an integral and welcome part of a successful and ethical business. We hire local talent at all levels regardless of race, color, religion, age, national origin, gender, gender identity, sexual orientation or disability, and actively foster inclusion in all forms both within our company and across interactions with clients, candidates and partners. Requirements:

Job DescriptionWelder and Fabrication Technician (2nd Shift) Project Length: 3-month project (contract) Pay: $40.00/hr (DOE) Schedule: 2:30 PM to 10:00 PM (Mon to Fri and OT) Location: Long Beach, CA Position Summary Kimco Staffing is seeking experienced Welders / Fabrication Technicians to support a short-term manufacturing surge. Candidates should be able to work independently in a fast-paced environment and collaborate with Engineering to build and improve tooling. Key Responsibilities • Fabricate and weld tooling and steel components (Flux Core/FCAW), • Fit, prep, and clean materials prior to welding; set up welding equipment and jig tables, • Inspect parts for dimensional accuracy and weld quality; identify defects and perform repairs, • Support process improvements and troubleshoot tooling/design issues with Engineering, • Operate fabrication equipment (vertical band saws, grinders/sanders); maintain safe, clean workspaceQualifications, • 3+ years welding/metal fabrication experience, • Strong Flux Core (FCAW) on steel experience, • Blueprint/fabrication drawing interpretation, • Experience with tooling/fixture fabrication preferred, • Quality inspection capability; mechanical aptitude; ability to meet aggressive schedulesCompliance (ITAR) This role is subject to ITAR *This position requires access to export-controlled technical data subject to US export control laws (including ITAR)PandoLogic. Keywords: Fabrication Technician, Location: Long Beach, CA - 90833 , PL: 604449985

Job DescriptionSenior Welder Location: Anaheim, CA (Onsite) Schedule: 2nd Shift — 2:00 PM to 10:00 PM Pay: $30–$38/hr (DOE) Type: Full-Time (40 hours/week) ITAR: This position is subject to ITAR requirements Overview We’re hiring a Senior TIG Welder for a fast-paced metal fabrication environment. This is a hands-on role focused on producing high-quality TIG welds on a variety of metals while working from prints and welding symbols to meet quality and production requirements. Responsibilities • Perform TIG (GTAW) welding on steel, stainless steel, and aluminum components, • Read and interpret blueprints, weld symbols, and work instructions, • Prep parts prior to welding (fit-up, grinding, cutting, cleaning), • Inspect welds for quality and make corrections as needed, • Use standard fabrication tools (grinders, cutters, drills, etc.), • Follow all safety requirements and maintain a clean work area, • Work collaboratively with production, quality, and engineering as neededRequirements, • 4+ years TIG welding experience in a fabrication / industrial environment, • Strong blueprint reading skills and weld symbol understanding, • Experience welding steel/stainless/aluminum, • Reliable attendance for 2nd shift (2:00 PM–10:00 PM), • Comfortable working onsite, • ITAR eligible Preferred, • MIG (GMAW) and/or Stick (SMAW) experience, • AWS welding certifications, • Pipe fitting experience (if applicable)PandoLogic. Keywords: Welder, Location: Anaheim, CA - 92816 , PL: 604541741

Job Description Welder / Metal Assembly Technician 1st shift 5/6 AM start time Job Description This role involves performing TIG welding, spot welding, brazing, and related metal assembly tasks on a variety of components in a manufacturing environment. You will use welding equipment, hand tools, and measuring instruments to produce high-quality parts that meet strict specifications and production standards. Responsibilities • Perform TIG welding, spot welding, brazing, and soldering on a variety of metal components and assemblies., • Read and interpret blueprints, work orders, engineering drawings, and specifications to determine welding and assembly requirements., • Set up and operate welding equipment safely and efficiently according to job specifications., • Inspect welds and finished assemblies to ensure they meet quality, safety, and production standards., • Assemble metal parts and components using appropriate hand and power tools., • Use measuring tools such as calipers, micrometers, and tape measures to verify dimensions and tolerances., • Perform minor equipment maintenance and promptly report any machine issues or malfunctions., • Maintain a clean, organized, and safe work area in accordance with company safety procedures., • Follow all company safety procedures, quality requirements, and manufacturing guidelines., • Meet daily production goals and deadlines while maintaining high workmanship standards., • Assist with other manufacturing and assembly duties as needed to support production operations. Essential Skills • Minimum 13 years of welding experience in a manufacturing or production environment., • Hands-on experience with TIG welding, spot welding, and brazing., • Ability to read and interpret blueprints, engineering drawings, and technical specifications., • Proficiency in using measuring tools such as calipers, micrometers, and tape measures., • Strong attention to detail with a commitment to producing high-quality workmanship., • Ability to set up and operate welding equipment safely and efficiently., • Capability to work independently with minimal supervision and collaboratively as part of a team., • Basic mechanical aptitude and practical problem-solving skills. Additional Skills & Qualifications • Experience with soldering and related metal joining techniques., • Comfort using a variety of hand and power tools for metal assembly., • Familiarity with production workflows and meeting daily output targets., • Ability to follow detailed work instructions and adapt to changing priorities., • Strong organizational skills to maintain a clean and efficient work area. Why Work Here? Join a stable manufacturing environment that values craftsmanship, safety, and quality. You will work with experienced professionals, gain exposure to a variety of metalworking techniques, and have opportunities to expand your skills on different equipment and assemblies. The role offers consistent daytime hours and a structured setting where clear expectations and support help you succeed in meeting production and quality goals. Work Environment This position is based in a manufacturing facility with a standard daytime shift from 8:00 a.m. to 4:30 p.m. You will work in a production area that uses welding equipment, hand and power tools, and precision measuring instruments. The environment requires adherence to safety procedures, use of appropriate protective gear, and maintaining a clean and organized workstation. Job Type & Location This is a Contract to Hire position based out of Northridge, CA. Pay and Benefits The pay range for this position is $25.00 - $28.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Northridge,CA. Application Deadline This position is anticipated to close on Oct 17, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionIf you are interested contact Andrey C at (562 566 4693) or book a meeting at https://talentassistant.aerotek.com/assistant/bookings/wxS4Q2ycPay rate: $30 to $50 an hour depending on experience Job Title: 5-Axis CNC Programmer Job Description This role focuses on programming, setting up, and proving out complex 5-axis CNC milling operations using Mastercam or GibbsCAM, while working to AS9100 standards. You will take parts from prototype through production, selecting optimal cutting tools, designing fixtures, and establishing speeds and feeds for a variety of challenging materials, including tungsten, Inconel, titanium, copper, and other alloys. The position requires hands-on involvement at the machine, including setup, fixture installation, and production handoff on modern CNC mills with pallet pools and controls such as Fanuc, Fadal, Haas, and Doosan. Responsibilities • Program 5-axis CNC mills using Mastercam or GibbsCAM to produce complex components to specification., • Perform hands-on setup of CNC mills, including fixture installation, tool loading, and machine preparation., • Prove out new programs at the machine, verifying dimensional accuracy, surface finish, and process reliability., • Select optimal cutting tools for a wide range of materials, including tungsten, Inconel, titanium, and copper., • Design and implement fixtures that ensure secure workholding, repeatability, and efficient machining., • Establish appropriate speeds and feeds based on material, tooling, and machine capabilities to optimize cycle time and tool life., • Program and set up CNC mills equipped with pallet pools to support efficient, continuous production., • Work with Fanuc, Fadal, Haas, and Doosan controls to load, adjust, and optimize CNC programs., • Apply AS9100 standards and best practices to ensure quality, traceability, and process control in all machining operations., • Support prototype and prototyping work by developing flexible, robust machining processes for new parts., • Collaborate with production teams to complete smooth production handoffs, including documentation and setup instructions., • Troubleshoot machining issues, make program and process adjustments, and implement improvements for accuracy and efficiency., • Interpret engineering drawings and GD&T requirements to ensure parts meet all dimensional and tolerance specifications. Essential Skills • Proven experience in CNC programming for 5-axis mills using Mastercam or GibbsCAM., • Hands-on experience setting up CNC mills, including fixture installation and tool setup., • Strong proficiency working with Fanuc, Fadal, Haas, and Doosan CNC controls., • Ability to perform complete prove-outs of new programs and validate machining processes., • Demonstrated skill in selecting optimal cutting tools for challenging materials such as tungsten, Inconel, titanium, and copper., • Experience designing fixtures that provide secure and repeatable workholding for complex parts., • Capability to establish and adjust speeds and feeds to balance productivity, tool life, and part quality., • Working knowledge of AS9100 standards and their application in machining and production environments., • Ability to interpret engineering drawings and apply GD&T principles in machining operations., • Experience working with CNC mills equipped with pallet pools for high-efficiency production, • in prototype and prototyping work, including developing processes for new and unique parts. Additional Skills & Qualifications • Familiarity with Fanuc B controls and related programming conventions., • Experience using GibbsCAM in addition to Mastercam for multi-axis programming., • Knowledge of machining high-temperature alloys and hard materials, including tungsten and Inconel., • Comfort working with copper and other non-ferrous materials while managing burrs and surface finish., • Understanding of aerospace-level quality requirements and documentation practices aligned with AS9100., • Ability to collaborate with engineering and production teams to refine part designs for manufacturability., • Strong problem-solving skills and attention to detail in both programming and hands-on machining., • Willingness to support continuous improvement initiatives in tooling, fixturing, and machining processes. If you are interested contact Andrey C at (562 566 4693) or book a meeting at https://talentassistant.aerotek.com/assistant/bookings/wxS4Q2ycJob Title: Welder Job Type & Location This is a Contract to Hire position based out of Vernon, CA. Pay and Benefits The pay range for this position is $35.00 - $38.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Vernon,CA. Application Deadline This position is anticipated to close on Oct 2, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description TIG Welder Anaheim, CA Mon- Fri. 6:30am- 3:00pm $25.00- 30.00/hour A TIG Welder job involves using Tungsten Inert Gas (TIG) (GTAW) to precisely join various metals (aluminum & stainless primarily) by interpreting blueprints, setting up equipment (torches, gas), preparing materials, performing high-quality welds, and inspecting for structural soundness, all while adhering to strict safety and maintaining tools/workstations. Key Responsibilities: • Blueprint Interpretation: Read and understand engineering drawings, technical diagrams, and welding symbols to determine requirements. • Material Preparation: Cut, clean, shape, and fit metal components before welding. • Welding Execution: Perform GTAW welding on various metals (stainless steel, aluminum, etc.) to create strong, precise, and visually appealing joints. • Equipment Management: Set up, operate, maintain, and troubleshoot TIG welders, torches, regulators, and other tools. • Quality Control: Inspect completed welds for defects, ensure compliance with standards (AWS, ISO), and perform necessary repairs. • Safety Compliance: Wear appropriate PPE, follow all safety rules (OSHA), and maintain a clean, organized work area. • Collaboration: Work with teams to meet deadlines and provide feedback for process improvement. Key Requirements: • Proven TIG welding skills and experience with various metals and 2 years of job experience minimum, • Knowledge of welding safety, codes, and procedures., • Strong hand-eye coordination, attention to detail, and mathematical skills., • Certification (e.g., AWS) may be required.

Job DescriptionD. G. Granade, Inc. is looking to hire two experienced steel fabricators/welders for an approximately four-week shop fabrication assignment. The primary scope of work will be the layout, fabrication, and welding of steel handrails and guardrails for a current construction project. This is not an entry-level welding position. We are looking for experienced fabricators who can read drawings, accurately lay out the work, cut and fit steel, and produce clean, consistent finished assemblies with minimal supervision. At least one of the two positions requires a current welding certification applicable to the work being performed. The WorkThe work will primarily include: • Read and work from construction drawings, details, and dimensions, • Lay out steel handrail and guardrail assemblies, • Measure, cut, fit, and prepare steel components, • Fabricate complete rail assemblies accurately to plan dimensions, • MIG and/or stick weld steel components as required, • Grind and finish welds where required for a clean finished product, • Maintain proper dimensions, alignment, and consistency between assemblies, • Check completed work for fit and accuracy, • Safely operate saws, grinders, welders, and other metal fabrication equipment, • Maintain an organized and productive shop work area What We're Looking ForWe need experienced steel fabricators who know how to build finished work, not simply someone who knows how to run a welder. Qualified applicants should be comfortable with: • Reading construction and fabrication drawings, • Steel layout and fabrication, • Accurate measuring and cutting, • Fitting components prior to welding, • Producing clean, consistent welds, • Fabricating repetitive assemblies while maintaining dimensional accuracy, • Working independently without constant supervision, • Safely operating standard welding and fabrication equipment Previous experience fabricating handrails, guardrails, stairs, structural steel, or miscellaneous metals is strongly preferred. One of the two hires must possess a current welding certification applicable to this work. Applicants with current certifications should identify their certification(s) when applying. Position • Temporary position – approximately 4 weeks, • Two positions available, • Full-time during the project, • Shop-based fabrication, • Immediate start, • Pay based on skill, experience, and applicable welding certifications D. G. Granade, Inc. is an established Northern California general contractor. We expect our people to be organized, accountable, and consistent and to take pride in producing work that is accurate and ready to install. To apply: Send your name, phone number, work history, description of your steel fabrication and welding experience, and any current welding certifications.

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n Pipe Fitter / Welder\n \n About the Role\n \n \nAs a Pipe Fitter / Welder, you'll fabricate, fit, and install the piping systems that carry liquids and gases throughout maritime structures at pressures ranging from vacuum to thousands of PSI. There's no room for shortcuts, and no tolerance for "close enough." You'll read drawings, cut and bend pipe, fit joints to tight tolerances, and weld or braze them as required. The systems you build will operate submerged, under pressure, for decades.\n \n What You'll Do\n Pipe Fitting\n \n\n • Interpret engineering drawings, isometrics, P&IDs, and weld procedure specifications to fabricate and install piping systems\n, • Measure, cut, bevel, bend, and fit pipe and tubing, from small-bore instrument tubing to large-diameter piping\n, • Fit-up welded joints, silver-brazed joints, and mechanically fastened connections to tight tolerances\n, • Work across systems including hydraulic, lube oil, high- and low-pressure air, seawater, chilled water, potable water, and steam\n, • Install hangers, supports, and penetration pieces per drawing and spec\n, • Perform hydrostatic, flood, and pneumatic testing and build test boundaries, monitor gauges, and identify leaks\n\n Welding\n \n\n • Perform NAVSEA-qualified welds on pipe and tube in all positions (1G-6G) using GTAW (TIG), SMAW (stick), or GMAW (MIG) processes as required\n, • Weld carbon steel, stainless steel, copper-nickel, and other alloys per applicable weld procedures\n, • Maintain weld certifications and pass re-qualification testing on schedule\n, • Perform silver brazing on piping joints per applicable procedures\n, • Prep joints (cleaning, purging, fit-up) to ensure radiographic- and ultrasonic-quality welds\n\n Quality & Compliance\n \n\n • Groom completed systems and prepare for company, customer, and government inspections\n, • Document all work: weld maps, joint logs, NDE records, material traceability\n, • Identify and disposition non-conformances through proper channels\n, • Maintain compliance with NAVSEA, SUBSAFE, Level I, and SOC requirements as applicable\n\n Required Qualifications\n \n\n • High school diploma or GED\n, • 5+ years of pipefitting, welding, or related mechanical trade experience\n, • Ability to read and interpret blueprints, isometrics, P&IDs, and weld procedure specifications\n, • Proficiency in GTAW (TIG) welding on pipe in multiple positions\n, • Experience with fit-up to tight tolerances on welded and brazed joints\n, • Ability to pass weld qualification testing to applicable certifications\n, • Willing to work any shift, overtime, and in all shop/field environments\n, • U.S. Person status (ITAR requirement)\n\n Preferred Qualifications\n \n\n • NAVSEA or nuclear welding certifications (current or prior)\n, • Experience with SUBSAFE, Level I, or SOC-controlled piping systems\n, • Military shipbuilding, submarine construction, or naval shipyard experience\n, • Completion of apprenticeship, vocational program, or UA journeyman pipefitter certification\n, • Familiarity with MIL-STD-1688, NAVSEA Technical Publications, or AWS D1.1/D1.6\n, • Experience welding copper-nickel (CuNi), Monel, and other naval alloys\n, • Brazing certifications (AWS C3.4 or equivalent)\n, • Ability to obtain and maintain nuclear qualifications\n, • Active DoD security clearance (Secret or above)\n\n Physical Requirements\n \n\n • Lift up to 50 lbs regularly and 75 lbs occasionally\n, • Climb, crawl, kneel, stoop, and work in confined and restricted spaces for extended periods\n, • Work in environments with variable temperatures, fumes, noise, and wet/oily conditions\n, • Maintain color vision adequate for weld inspection and system identification\n, • Stand and work in welding positions (overhead, vertical, horizontal) for full shifts\n\n \n \nUS Salary Range\n \n \n$68,000-$90,000 USD\n \n \nThe salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: \n \n Benefits\n \n \nAt Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you're supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.\n \n Protecting Yourself from Recruitment Scams\n \n \nAnduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.\n \n \nTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:\n \n\n • No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.\n, • Please always verify communications:\n \n, • Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.\n, • Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to [email protected].\n \n, • Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.\n, • What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to [email protected]. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.\n\n \n Data Privacy\n \n \nTo view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/. \n \n \nBy submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.

Job Description Overview We are seeking a dedicated Assembler to join our manufacturing team. The successful candidate will be responsible for assembling electronic and mechanical components to produce high-quality products. This role is vital in ensuring that all assemblies meet strict quality standards and specifications. The ideal applicant will possess strong mechanical aptitude, electrical knowledge, and experience working with various hand and power tools. We offer a dynamic work environment where precision, efficiency, and teamwork are highly valued. Duties • Assemble coil and other electro-mechanical components., • Prepare materials for production (cutting, cleaning, spot welding, heat shrinking)., • Handle two-part potting materials, silicone adhesives, lubricants, and flammable chemicals Cross-train in other production areas as needed, • Maintain a safe, clean, and organized work environment (5S principles) Support continuous improvement and production initiatives, • Maintain accurate quality documentation (work orders, process data, test results, etc.) Perform quality control and ensure products meet specifications, • Follow standard operating procedures (SOPs) and safety guidelines (JHAs) Perform other duties as assigned Comply with all company and safety (HSE) policies, • Strong understanding of PCB design, schematics, and electrical wiring principles REQUIRED QUALIFICATIONS: • High school diploma or GED; specialized training in an industrial production setting, • 3 to 5 years of previous experience in single-piece flow assembly production lines., • Excellent written and spoken English language skills., • Basic Math Skills., • Basic Inspection Knowledge., • Experience using MS Office., • Experience working with power tools, heating tools, and small machines (i.e., heat guns, soldering stations, spot welder stations, air compressor tools, ovens, electrical test equipment, etc.)., • Manual dexterity required for operating machinery and computers., • Ability to lift up to 40 pounds required., • Assembly personnel must be able to recognize all colors within the visible spectrum to recognize various wiring and labeling specifications \nCompany Description MALEKO PERSONNEL is the leader in specialized industrial, production, and logistics staffing. We represent a variety of professionals, including assembly, shipping, receiving, and inventory control specialists, certified forklift drivers, and warehouse professionals. If you're looking for short-term or long-term assignments, competitive pay rates, and a variety of shift options you owe it to yourself to give MALEKO PERSONNEL a look. MALEKO has proudly put together a team of highly skilled and seasoned professionals who understand and embrace the pursuit of customer satisfaction and are ready to work for you! MALEKO PERSONNEL is the leader in specialized industrial, production, and logistics staffing. We represent a variety of professionals, including assembly, shipping, receiving, and inventory control specialists, certified forklift drivers, and warehouse professionals. If you're looking for short-term or long-term assignments, competitive pay rates, and a variety of shift options you owe it to yourself to give MALEKO PERSONNEL a look. MALEKO has proudly put together a team of highly skilled and seasoned professionals who understand and embrace the pursuit of customer satisfaction and are ready to work for you!

Job Description Cleanroom Assembler | $21.00-$22.00/hour + Benefits | 1st & 2nd Shift Available Responsibilities: • This position is primarily responsible for fabricating and assembling various plastic bottles, carboys, tanks, tubing and other products and component fittings to a finished product., • Welding, bonding, bending and cutting are required and performed to customer specifications in accordance with company standards., • Develops layout and plans sequence of operation., • Positions parts in jigs or fixtures or clamps parts along layout marks on work table., • Selects, marks, cuts or bends material as appropriate and/or per work order instructions., • Sets up and operates fabricating machines such as hot air welder, mill, drill press, saws, flange forming machines, tubing benders, ultraviolet curing machine and lathe., • Assembles, constructs, bond and/or weld components per work order., • Record lot numbers per product/material., • Cleans finished product with appropriate chemical or other cleaning agent as instructed. Requirements: • HS Diploma or GED, • 6+ months in a hands on assembly role, • Prior experience working in a cleanroom environment a plus!, • Able to read and understand drawings, ability to write legibly, good basic math skills 1st Shift: Monday-Friday 5:00am-1:30pm, 6:00am-2:30pm 2nd Shift: Monday-Friday 2:30pm-11:00pm, 3:00pm-11:30pm \nCompany Description Crossroads Staffing is a nationwide talent solutions firm that specializes in matching the right job with the right candidate fast! We offer temp, contract, temp to hire and direct hire opportunities within various industries, our specialties being in the Administrative, Information Technology, Human Resources, Accounting, Customer Service, Manufacturing and Legal fields. We know how daunting the job search can be, so we offer a quick and easy hiring process without extra hoops to jump through. Our structured interview process allows us to get a sense of what qualities you bring to the table, and how those correlate with our current openings. We're here to represent you and help you on the path towards finding your next career opportunity. All you have to do is apply! Crossroads Staffing is a nationwide talent solutions firm that specializes in matching the right job with the right candidate fast! We offer temp, contract, temp to hire and direct hire opportunities within various industries, our specialties being in the Administrative, Information Technology, Human Resources, Accounting, Customer Service, Manufacturing and Legal fields. \r\n\r\nWe know how daunting the job search can be, so we offer a quick and easy hiring process without extra hoops to jump through. Our structured interview process allows us to get a sense of what qualities you bring to the table, and how those correlate with our current openings. We're here to represent you and help you on the path towards finding your next career opportunity. All you have to do is apply!

Job DescriptionWe are seeking a Welder/Fabricator/Installer to become an integral part of our team. The Fabricator/Installer will use our equipment to weld and assemble our clients ornamental wrought iron needs. Responsibilities: • Weld and fabricate wrought iron/ornamental iron gates, fences, etc., • Install fences, gates, etc., • Able to run a crew when needed, • Calculate material measurements to specifications. Qualifications: • At least 3 years of experience in welding and fabricating ornamental wrought iron fencing/gates and railings., • Experience in fabricating wrought iron, • Experience in reading and understanding shop drawings, • Familiarity with welding tools, grinders, drills, etc., • Experience in installing fencing and gates., • Must be a team player and work well with others, • Ability to handle physical work a must.

Job DescriptionWelder (MIG / TIG) – Rancho Cordova, CA2nd Shift - Swing shift - Mon - Th; 2:30pm - 1:10am (4/10 schedule)$22 - $25Position SummaryWe are seeking a skilled Welder to join a manufacturing and fabrication team in Rancho Cordova. This position performs MIG and TIG welding across a limited range of material gauges, alloys, and positions. The ideal candidate is detail-oriented, safety-focused, and capable of producing high-quality welds that meet customer specifications with minimal defects. Key Responsibilities • Perform MIG and TIG welding on a variety of metal materials within defined specifications, • Identify and select correct gas, wire, and welding materials for each process, • Use oxy-acetylene and plasma torches to cut materials as needed, • Read and interpret blueprints, diagrams, schematics, and technical drawings, • Join, fabricate, and repair metal components using appropriate welding techniques, • Execute consistent weld types including groove, fillet, lap, butt, and full penetration welds, • Perform multi-pass welds and stack-ups as required by job specifications, • Fabricate and weld products to meet strict customer requirements with minimal defects, • Perform carbon air arc cutting as required and pass testing validation, • Develop and construct basic fixturing for welding and fabrication work, • Straighten and correct welded parts as needed, • Weld and repair holes up to 2 inches deep, • Visually inspect welds for quality, accuracy, and defects, • Inspect welding equipment and tools for wear and safety compliance, • Maintain a clean, organized, and safe work environment, • Operate forklifts (must maintain or obtain forklift certification)Requirements, • Minimum 6 months of sheet metal, welding, or metal fabrication experience, • Ability to read and interpret written instructions, blueprints, and technical documents, • Strong manual dexterity and ability to use welding tools and equipment safely, • Experience using MIG and TIG welding processes for basic butt and fillet welds, • Basic math skills including addition and subtraction, • Ability to follow verbal instructions and work independently or as part of a team, • Ability to obtain AWS D1.1 or D1.3 welding certifications as requiredPreferred Skills, • Experience with fabrication, structural welding, or production welding environments, • Familiarity with industrial safety standards and PPE compliance, • Forklift certification or ability to obtain certification quickly, • Strong attention to detail and quality control mindset Work EnvironmentThis role is based in a manufacturing/fabrication shop environment and requires standing, lifting, bending, and working with heavy materials and welding equipment. Safety compliance and precision are essential.

Job Description Universal Sheet Metal is looking for a dependable, motivated individual to join our shop team. No experience is necessary — we are willing to train the right person! Previous construction, sheet metal, fabrication, warehouse, or shop experience is a plus. Position Details • Starting Pay: $19.00/hour, DOE (Depending on Experience), • Schedule: Monday–Friday, 6:00 AM–2:30 PM, • Overtime: Available; occasionally mandatory, • Position: Full-Time Job Duties Duties may include: • Assisting with sheet metal fabrication and shop production, • Operating basic shop tools and equipment after training (ex: press brake, spot welder, accupress, soldering), • Measuring, cutting, bending, and preparing materials, • Loading and unloading materials, • Organizing materials and maintaining a clean work area, • Assisting other shop employees as needed, • Following company safety procedures What We’re Looking For • Reliable and punctual, • Willing to learn and take direction, • Good work ethic and positive attitude, • Able to work in a fast-paced shop environment, • Comfortable performing physical work, including lifting and being on your feet throughout the shift, • Able to work overtime when required, • Sheet metal, construction, fabrication, or similar experience is a bonus, but not required Employee Benefits • Paid Time Off (PTO): 40 hours annually, subject to company eligibility policies, • Medical Insurance: Offered to eligible employees, with the company covering 50% of the employee's premium, • Retirement Plan: SIMPLE IRA offered with up to a 3% employer match, subject to plan eligibility, • Paid Holidays: Available after 90 days of employment, • Bonus Opportunities: Potential for additional bonuses based on company discretion and performance; bonuses are not guaranteed, • On-the-Job Training: Opportunity to learn valuable skills in the sheet metal fabrication trade This is a great opportunity for someone looking to learn a trade and grow with the company. Starting at $19.00/hour DOE. Apply in person M-F 8:00am - 3:00pm

Job Description At Clark Pacific, the Yard Specialist supports daily manufacturing operations across multiple functional areas while maintaining a strong focus on safety, quality, and productivity. This role works hands-on in the manufacturing environment and may support areas including Production Lines, Maintenance, Loading, Kitting and Procurement, Woodshop, Batch Plant, Glass Division, Clark Metal Works (CMW) / PEP, and Facilities. This position is ideal for dependable, safety-minded individuals looking to grow within a manufacturing setting. Essential Duties and Responsibilities: • Exercise a high level of professionalism and confidentiality when working with team members, projects, and proprietary information., • Follow established safety principles, standard operating procedures (SOPs), and job hazard analyses (JHAs) for materials, equipment, and work areas., • Complete required documentation and perform material handling duties including receiving, storage, disbursement, and delivery of materials, products, and equipment., • Prepare and assemble materials for manufacturing according to drawings and work instructions, including mixing, cutting, bending, welding, gluing, and assembly. Materials may include concrete, sand, additive mixtures, wood, rebar, steel, windows, plastics, and related components., • Maintain clean, organized work areas and ensure debris, recyclables, and hazardous materials are properly managed and stored., • Operate machinery and hand and power tools such as drills, saws, grinders, welding equipment, CNC machines, and other fabrication tools., • Support general manufacturing and yard operations as needed., • Other duties as assigned. Qualifications: • Minimum of 2 years of experience in manufacturing, construction, concrete, or a related field required., • Experience working in a union environment preferred., • High school diploma or GED preferred. Skills and Abilities: • Strong commitment to safety and quality., • Ability to follow instructions, work plans, and blueprints., • Dependable, team-oriented work ethic., • Ability to perform physical tasks in a fast-paced manufacturing environment., • Willingness to participate in required training and skill development. Work Environment & Physical Requirements: • Work performed in manufacturing and outdoor environments with exposure to weather, noise, moving equipment, and machinery., • Ability to stand, walk, climb, bend, lift, and perform physical tasks throughout the shift., • Must be able to lift up to 50 lbs. regularly, with assistance for heavier loads., • Required use of personal protective equipment (PPE) including hard hat, high-visibility vest, gloves, eye and hearing protection. Benefits (Union): • Medical insurance options including WHA High Deductible Plan with HSA and Kaiser Traditional HMO, based on eligibility, • Employer contributions toward medical premiums and Health Savings Account (HSA), increasing with tenure and classification, • Dental insurance through Sun Life Dental, • Vision insurance through VSP, • Union pension and retirement benefits, • Paid training and advancement opportunities, • Stable, full-time union employment with overtime opportunities based on production needs Benefit eligibility and employer contributions vary based on length of service, classification, and union agreement. Interested? If you are safety-focused, reliable, and ready to contribute to a high-performing manufacturing team, we encourage you to apply. Clark Pacific is an Equal Opportunity Employer Equal Opportunity Employer / Protected Veterans / Individuals with Disabilities

Job Description CERTIFIED WELDER INSPECTOR Position Summary: The Certified Welding Inspector (CWI) is responsible for inspecting and verifying welded components and assemblies to ensure they meet company specifications, customer requirements, and aerospace industry standards. This role performs visual and dimensional inspections, reviews welding documentation, and ensures compliance with quality and regulatory requirements. The CWI works closely with production, engineering, and quality teams to maintain product integrity and ensure welding processes meet required specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Key Responsibilities • Perform visual inspections of welded components and assemblies to verify compliance with engineering drawings, welding procedures, and specifications., • Inspect weld quality, dimensions, and workmanship to ensure conformance with aerospace and customer standards., • Review welding procedure specifications (WPS), procedure qualification records (PQR), and welder qualifications., • Verify that welders are properly certified and qualified for the welding processes being performed., • Document inspection results and maintain accurate inspection records., • Identify nonconforming welds and work with production and quality teams to determine corrective actions., • Support root cause analysis and corrective action investigations related to welding defects., • Assist in the development and review of welding procedures and inspection plans., • Ensure compliance with applicable quality standards such as AS9100 and welding certification requirements from the American Welding Society., • Participate in internal and external audits related to welding processes and quality control. Requirements Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience: MIG welding: 10 years (Preferred) • Tig Welding: 10 years (Preferred) License/Certification: • Certified Welding Inspector (Required) Education/Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Language Ability: Read and comprehend simple instructions, short correspondence and memos. Write simple correspondence. Effectively present information in one-on-one and small group situations to customers, clients and other employees. Must know how to read and write English language. Mathematical Ability: Add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Compute rate, ratio and percent, and draw and interpret bar graphs. Reasoning Ability: Apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Deal with problems involving a few concrete variables in standardized situations. Computer Skills: Basic Certificates and Licenses: High School Diploma or GED, AWS D17.1D17.1M D1.1 Mig & Tig welding. Supervisory Responsibilities: Yes Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be comfortable working in a warehouse environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to list up to 40 lbs. Must be able to work in a standing position up to 8 hours per day. Benefits • 401(k), • Dental insurance, • Employee assistance program, • Employee discount, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Parental leave, • Retirement plan, • Vision insurance

Job Description Nichols Farms is one of the top processors of pistachios in the United States. For more than two decades, Nichols Farms has maintained superior quality and exceptional service in supplying pistachio and almond products to major retail and wholesale clients domestically and internationally. Nichols Farms maintains a state-of-the-art processing facility at their corporate headquarters in Hanford, California, employing over 350 employees. Join the Nichols Farms Team in their objective of continued growth. Nichols Farms possesses a strong employee-oriented environment dedicated to training and growth of team members.The Nichols Farms Mission and Vision supports a culture of striving for mutual success of our employees, suppliers and customers through operational excellence and educational development.POSITION SUMMARY: The Welder/Fabricator supports the Engineering Department Construction Projects by applying fabricator/welding skills and performing with a high degree of proficiency and effectiveness. Welder/Fabricator lays out, fits, assembles and welds fabricated components following company and safety procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES:Strong ability in installing and repairing/welding of equipment.Plans layout, assembly and welding using knowledge of welding techniques.Operates other shop equipment and tools needed to prepare components for welding.Advanced in MIG, TIG, STICK, Stainless Steel, ARC Welding abilities.Safety conscious uses such as fire prevention and knowledge of Fire blanket, Covers, and follows company SSOPs/SOPs.Knowledge of Hot Work PermitsKnows and follows procedures and plant programs such as GMPs, LOTO, Confined Space, and Fall Protection safely.Ability to maintain daily paper and complete orders in a timely efficient manner. Reads and interprets equipment manuals to perform required maintenance service.Report Immediately to Lead/Supervisor/Manager of any damage, irregular activity, or unsafe conditions concerning equipment.Operate a forklift, scissor lift, boom lift, telehandler and other industrial trucks.Perform housekeeping of work area, including organizing and sweeping, maintaining of personal or company tools and equipment.Perform other job duties and tasks as assigned by management. EDUCATION AND EXPERIENCE:Preferably 5+ years of experience in food manufacturing or industrial environment Basic Mathematical AptitudeStrong Welding Skills in MIG, TIG, STICK or ARC and Sanitary Welding.High School Diploma or GED requiredJOB ATTRIBUTES:Safety Awareness: Ability to identify and correct conditions that affect employee safety.Time Management: Ability to utilize the available time to organize and complete work within given deadlines.Adaptability: Ability to adapt to change in the workplace. Capable of functioning in a fast-paced entrepreneurial setting.Resource Management (People & Equipment) - Ability to obtain and appropriate the proper usage of equipment, facilities, and materials. Prioritization: Ability to quickly prioritize among numerous pressing tasks and manage multiple priorities and deadlines. Communication: Excellent verbal and written skills, as well as ability to make presentations.Interpersonal: Ability to effectively build working relationshipsTeam Involvement: Works effectively with teams and work groups. Actively participates in problem solving and interacts with team and work groups to achieve team and organizational goals.Detail-oriented: Attention to detail, and ability to prioritize and manage multiple tasks.PHYSICAL DEMANDS and WORK ENVIRONMENTFacility is a manufacturing environment, and this position may primarily be outdoors. The manufacturing environment and working outdoors may include high levels of noise. When working outdoors conditions can include extreme cold, heat, or humidity; and sometimes can include work in dusty conditions. Ability to lift up to 50 pounds on occasion. Ability to wear Personal Protective Equipment (PPE) as designated by the company. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. This job description is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential functions.EOE/M/F/D/V

Job Description Seeking experienced certified welder to join our dynamic team. Must be able to weld components that are vertical, flat, or overhead, have enough manual dexterity and stability as required for precision weld, cut, and braze metal pieces and products by using flame-cutting and hand welding equipment. Safety is of the utmost importance therefore qualified candidates must be able to see details at close range, traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials and be able to lift up to 15 pounds at times. You will weld, cut, and braze metal pieces and products by using flame-cutting and hand welding equipment. Become a part of the Conexwest as we pursue excellence and exceed industry standards. Take the next step in the right direction of your career. Come and grow with us because simply, #WeBuildItBetter Essential Duties & Responsibilities • Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job, • Repairs and fabricates various items and equipment using cutting, burning, and welding techniques and equipment, • Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage, • Prepares, assembles, and tacks weld parts and surfaces to be welded, • Maintains, organizes, and cleans equipment and the work area, • Notifies supervisor when faulty equipment or defective materials are discovered, • Performs other related duties as assigned Required Skills & Abilities • Must be Certified, • Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair, • Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints, • Excellent ability to read and listen to assignments given in a variety of forms, • Basic understanding of mathematics as related to welding assignments DIVERSITY & INCLUSION IS WHAT MAKES US THINK OUTSIDE THE CONEX, AND THAT’S HOW “WE BUILD IT BETTER”! EEOC/ADA/VET/LGBTQ Job Type: Full-time Pay: $23.00 - $26.00 per hour Powered by JazzHR mHJrtOse5N

Job Description Job Title: Steel Welder Pay: $25/HR - $30/HR Location: South Sacramento Shift: 4/10 Monday - Thursday / Friday OT and Sat during peak season Job Description This role focuses on structural steel welding using the flux core process on I-beams, wide flange beams, and complex tube steel columns that form the framework of multi-story buildings. You will perform production welds on steel and mild steel components of varying thicknesses, ensuring strong, precise, and code-compliant welds that meet fabrication and blueprint specifications. Responsibilities • Perform structural steel welding using the flux core process on I-beams, beams, and complex tube steel columns used in 2- to 3-story building structures., • Execute production welds on steel and mild steel components ranging from approximately 3/8 inch to 1 inch in thickness., • Use flux core welding wire, including 3/32" NR-311 or similar, in accordance with project requirements and welding procedures., • Read and interpret blueprints, fabrication drawings, and weld symbols to ensure accurate layout and weld placement., • Follow applicable welding standards and guidelines, including AWS-related practices, to produce high-quality, structurally sound welds., • Inspect welds visually and make necessary adjustments to maintain quality, consistency, and adherence to specifications., • Set up, operate, and maintain welding equipment and related tools safely and efficiently., • Work closely with fabrication and shop personnel to coordinate tasks and meet production schedules., • Maintain a clean, organized work area and follow all safety procedures in a steel yard environment. Essential Skills • At least 3 years of structural steel welding experience using the flux core process., • Proven experience performing production welds on steel and mild steel components., • Ability to read and interpret weld symbols, blueprints, and fabrication drawings., • Hands-on experience welding structural steel members such as I-beams, beams, and tube steel columns., • Proficiency with flux core welding processes, including use of wires such as NR-311., • Working knowledge of structural steel fabrication practices and alignment with AWS-related standards., • Strong attention to detail and commitment to producing high-quality, structurally sound welds. Additional Skills & Qualifications • Familiarity with nickel and other steel-related materials used in structural applications., • Experience working in a steel yard or structural steel fabrication environment., • Ability to work from and follow detailed fabrication instructions and shop drawings., • Solid understanding of safe work practices related to welding and handling structural steel. Why Work Here? You will join a team that values craftsmanship, safety, and reliability in the creation of structural steel components for multi-story buildings. The environment offers the opportunity to work on substantial, visible projects while continuously sharpening your welding and fabrication skills. You can expect a culture that rewards consistent quality, teamwork, and professional growth in a hands-on, production-focused setting. Work Environment The role is based in a steel yard environment where most of the work area is covered but open on the south and east sides, exposing you to varying outdoor conditions. You will work around structural steel beams, columns, and fabrication equipment, using flux core welding machines and related tools throughout the shift. The setting is industrial and production-oriented, requiring adherence to safety procedures, appropriate personal protective equipment, and readiness to work around heavy materials and active fabrication operations. Job Type & Location This is a Contract to Hire position based out of Sacramento, CA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Sacramento,CA. Application Deadline This position is anticipated to close on Oct 20, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: 1st Shift Maintenance Mechanic/Welder Job Description This role focuses on performing mechanical and electrical troubleshooting and maintenance on industrial equipment within a cabinet manufacturing environment. The technician ensures production lines run efficiently by diagnosing issues, performing repairs, and carrying out preventive maintenance on machinery and control systems. Responsibilities • Perform mechanical and electrical troubleshooting on industrial equipment to minimize downtime and maintain consistent production., • Diagnose and repair issues involving mechanical components such as gears, pneumatic systems, and related machine parts., • Conduct electrical maintenance, including inspection, adjustment, and repair of electrical components and systems., • Carry out preventive maintenance activities on production machinery to reduce unplanned breakdowns and extend equipment life., • Troubleshoot PLC-controlled systems to identify faults and support efficient machine operation., • Document maintenance activities, repairs, and parts used in accordance with site procedures., • Collaborate with production and other maintenance team members to prioritize work orders and support continuous improvement of equipment performance., • Follow safety procedures and best practices while working on mechanical and electrical systems in an industrial environment. Essential Skills • Hands-on experience performing mechanical troubleshooting on industrial machinery., • Experience with electrical troubleshooting and maintenance in a manufacturing or industrial setting., • Knowledge of mechanical systems including gears, moving parts, and general machine components., • Knowledge of pneumatic systems and the ability to diagnose and repair pneumatic components., • Ability to perform preventive maintenance on industrial equipment., • Experience with PLC troubleshooting to support equipment diagnostics., • Background in manufacturing, with exposure to production line equipment., • Mechanical aptitude with the ability to read and understand technical information related to equipment., • Electrical aptitude with a solid understanding of basic electrical principles and components. Additional Skills & Qualifications • Experience working in a cabinet manufacturing or similar production environment., • Familiarity with long, continuous production lines and associated maintenance needs., • Ability to work collaboratively with production and maintenance teams., • Strong problem-solving skills and a methodical approach to troubleshooting., • Ability to manage multiple maintenance tasks and prioritize work in a fast-paced environment. Why Work Here? Join a stable manufacturing operation where you can apply and grow your mechanical and electrical maintenance expertise on modern industrial equipment. You will work in an environment that values safety, teamwork, and continuous improvement, with opportunities to expand your technical skills in areas such as pneumatics and PLC troubleshooting. The role offers the chance to contribute directly to efficient production processes and to be part of a team that keeps critical equipment running smoothly. Work Environment The position is based in a cabinet manufacturing facility featuring long production lines dedicated to the cabinet-making process. The work involves operating within an industrial environment around machinery, gears, and pneumatic and electrical systems. You will spend significant time on or near production lines, performing hands-on maintenance and troubleshooting on equipment throughout the facility. Job Type & Location This is a Contract to Hire position based out of Anaheim, CA. Pay and Benefits The pay range for this position is $31.00 - $37.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Anaheim,CA. Application Deadline This position is anticipated to close on Oct 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Welder – MIG/TIG Weld Operator (Production Welding & Fabrication) Location: Rancho Cordova, CA 95742 Pay: $22.00–$24.00 per hour Shifts: Swing Shifts Available 4 Days x 10 Hour Shifts Monday - Thursday (2:30pm to 1:10am) Job Summary We are seeking a skilled Welder / Weld Operator to perform MIG welding and TIG welding on a variety of materials, gauges, and weld positions in a production manufacturing environment. This role is ideal for candidates with hands-on metal fabrication, welding, and assembly experience who take pride in producing high-quality, precision welds that meet engineering specifications. Key Responsibilities • Perform MIG and TIG welding on customer parts and assemblies to specification, • Select appropriate gas, wire, and welding settings for each application, • Cut, shape, and prepare materials using oxy-acetylene torches and plasma cutting equipment, • Read and interpret blueprints, schematics, and technical drawings, • Fabricate, assemble, join, and repair metal components, • Perform groove, fillet, lap, butt, and full-penetration welds, • Complete multi-pass welds and stack welds as required, • Weld holes and gaps up to 2 inches deep, • Build basic fixtures and straighten welded assemblies, • Inspect welds, tools, and equipment for quality, defects, and wear, • Perform carbon air arc cutting (training/testing required), • Operate forklifts (current certification required) Must-Have Qualifications • Minimum 6 months of welding, sheet metal, or metal fabrication experience (beyond schooling), • Experience performing MIG and/or TIG welding (butt and fillet welds required), • Ability to read and interpret blueprints, drawings, and written instructions, • Strong hand-eye coordination and welding tool dexterity, • Basic math skills (addition, subtraction, measurement), • Ability to follow safety procedures and production standards, • Ability to obtain AWS welding certifications (D1.1 or D1.3) if required Preferred Qualifications • Experience with multi-pass welding and full-penetration welds, • Prior experience in a manufacturing or production welding environment, • Forklift certification (current or previously certified), • Experience with plasma cutting and oxy-acetylene torch work, • Strong mechanical aptitude and metal fabrication experience Why Apply? • Competitive hourly pay with growth potential, • Hands-on fabrication and production welding environment, • Opportunity to expand welding certifications and technical skills, • Day and swing shift options available, • Stable full-time manufacturing position with overtime opportunities, • Team-oriented shop environment with long-term career potential \nCompany Description For over 30 years, clients and candidates have entrusted AtWork to provide workforce solutions nationwide. With over 80 offices nationwide, AtWork specialize in executive, professional, commercial, and government verticals. AtWork utilizes a collaborative approach where we deliver quick, high-quality results. Our customizable service portfolio focuses on direct-hire and flexible workforce solutions. Since 1986, AtWork has continued to be an award-recognized leader in the staffing industry by clients, candidates, and industry professionals. For over 30 years, clients and candidates have entrusted AtWork to provide workforce solutions nationwide. With over 80 offices nationwide, AtWork specialize in executive, professional, commercial, and government verticals. AtWork utilizes a collaborative approach where we deliver quick, high-quality results. Our customizable service portfolio focuses on direct-hire and flexible workforce solutions. Since 1986, AtWork has continued to be an award-recognized leader in the staffing industry by clients, candidates, and industry professionals.

Job Description WELDER: • The Welder operates safety equipment and uses safe work habits while performing his job function., • The Welder welds components in flat, vertical, or overhead positions., • The Welder ignites torches or starts power supplies and strikes arcs by touching electrodes to metals being welded, completing electrical circuits., • The Welder detects faulty operation of equipment or defective materials and notifies supervisors., • The Welder clamps, holds, tack-weld, heat-bend, grind or bolts component parts to obtain required configurations and positions for welding., • The Welder operates manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, and flux-cored arc, plasma arc, and shielded metal arc, resistance welding, and submerged arc welding., • The Welder monitors the fitting, burning, and welding processes to avoid overheating of parts of warping, shrinking, distortion, or expansion of materials., • The Welder examines work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications., • The Welder recognizes, set up, and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment., • The Welder will lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. SHIPFITTER: 1) Lays out and fabricates metal structural parts, such as plates, bulkheads, and frames, and braces them in position within hull of ship for riveting or welding: Lays out position of parts on metal, working from blueprints or templates and using scribe and hand tools. 2) Locates and marks reference lines, such as center, buttock, and frame lines. 3) Positions parts in hull of ship, assisted by RIGGER. 4) Aligns parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls. 5) Marks location of holes to be drilled and installs temporary fasteners to hold part in place for welding or riveting. 6) Installs packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips. 7) May prepare molds and templates for fabrication of nonstandard parts. 8) May tack weld clips and brackets in place prior to permanent welding. 9) May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines. • Must have reliable transpiration, • Must pass a pre-employment physical and drug test, • Must have own tools -Must have 3-5 min years experience

Job Description Performs functions directed towards successfully and efficiently meeting manufacturing goals for customer orders, by maintaining the facility and equipment in good repair and in working order so as to eliminate down time. Pay Range: $96,975 - $161,624 ESSENTIAL FUNCTIONS: 1. Must meet all requirements for Mechanics without direct assistance or supervision, 2. Must have knowledge, skills, and abilities to perform all preventative maintenance, 3. Maintain and repair physical structure of building, equipment and general facilities, 4. Install new equipment and assists with new construction projects, 5. Schedule and perform preventative maintenance on equipment, 6. Plan, fabricate and install non-mechanical equipment (such as stands, tables, etc.), 7. Utilize a Maintenance Program and other tools for maintenance efficiency, 8. Keep detailed records on work orders, down time, maintenance projects and materials purchased, 9. Perform work to 600 volt electrical systems, 10. Able to weld with good precision utilizing a heli-arc, tig welder and plasma cutter, 11. Licensed to operate both stand up and sit down forklift, 12. Monitor, complete and update PM program and Idle Assets Database, 13. Has responsibility for making recommendations in hiring, firing, discipline, promotion, transfer, and compensation decisions., 14. Conduct employee training and champion the department’s continuous improvement, 15. Schedule and assign work to maintenance team member/s to meet daily production requirements, 16. Comply / enforce established standards, procedures, and expectations for quality, safety and sanitation, 17. Observes the worker to ensure compliance with standards, 18. Maintains labor cost control by completing tasks on straight time, ensuring proper manning, and managing projects to ensure efficiency in department., 19. Chair weekly department safety meetings and maintains an open dialog with all employees, 20. Completes all required communication log and approves all payroll time cards, 21. Be familiar with all company policies and procedures and the local practices of such; uphold/enforce them in order to maintain fairness and consistency of treatment., 22. Administer employee appraisals and salary reviews and provide employees with feedback., 23. Assist employees in solving work related issues; providing employee guidance/direction, counsel and motivation., 24. Perform other duties or special projects as needed., 25. Must follow all Plant and Safety Rules, 26. Cooperates in maintaining a safe and respectful work environment GENERAL QUALIFICATIONS: To perform this job successfully an individual must be able to perform the above functions satisfactorily. The required levels of knowledge, skill and ability are described in greater detail in the following sections. EDUCATION and/or EXPERIENCE Technical Trade / College degree or equivalent and/or minimum of ten 10 years manufacturing maintenance experience with a minimum of 5 years experience in a food manufacturing environment and with 5 years minimum in a supervisory/exempt role. Must successfully complete on the job training including being able to learn and apply knowledge of production processes, raw material, and finished product requirements and specifications. Must have an electro/mechanical aptitude applicable to basic machinery maintenance and must posses a current forklift driver license. LANGUAGE SKILLS: Verbal and written communication skills are of importance as this position requires frequent and effective communication with plant and senior level managers, supervisors, other employees as well as senior management. Must also posses the ability to give thorough instructions and communicate effectively with department employees. MATHEMATICAL SKILLS: Ability to add, subtract, multiply and divide all units using whole numbers, fractions and decimals. Ability to take / read / calculate or otherwise measure temperatures, time and space (English and metric systems). REASONING ABILITY: Must be able to solve common problems in a number of concrete standard situations; to give instructions; to create or interpret various reports; to read technical drawings and equipment manuals. OTHER SKILLS AND ABILITIES: Ability to comfortably operate standard office equipment, including proficient operation of desktop computer applications/operating systems; welding equipment; presses; power tools and other equipment/machinery used in the maintenance or repair of industrial equipment. Must posses a current forklift driver license. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the day to day tasks of this job the employee may sit or stand for long periods of time while using hands and arms to possibly handle and operate objects. Occasionally the employee will need to kneel, crouch, crawl, or climb. The employee will be regularly required to talk and listen to others. There is occasional to frequent lifting involved with objects weighing up to 60+ pounds. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The job is performed in the maintenance shop and throughout the facility where noise levels are moderate to high. The person will be exposed to strong aromas, airborne dust particles emanating from ingredients being used, and will be in the presence of or otherwise operating machinery.

Job DescriptionMaintenance Mechanic Maintenance Technician JOB REQUIREMENTS: • Minimum 2 years’ maintenance experience working in industrial electrical/mechanical field., • Knowledge of AC motors/controls, mechanical, hydraulic, and pneumatic systems., • Working knowledge of DC motors and controls., • Valid driver's license and Novolex Forklift certification required; training provided., • Good performance, safety and attendance records., • Possible daily lifting of up to 40 lbs., • Willingness to work overtime, weekends and holidays as required., • Willingness to work any shift., • Must be knowledgeable in electrical system, prints/schematics., • Must possess good written and verbal communication skills, decision making ability and mathematical knowledge., • Performs quality work within reasonable time standards set forth by Leadership in verbal or written instructions. Additional duties Include: • Maintain electrical control systems and mechanical equipment used in industrial manufacturing., • Troubleshoot and repair Extruders, Thermoformers and Packagers, Electrical heat/cool control systems, • AC and DC motors and their control systems, • Pneumatic and hydraulic systems, • PLC’s control systems used throughout the plant., • Preventative maintenance., • General repairs to buildings and structures as required, • Proper operation of maintenance equipment (lathe, mill, welder, drill press, power tools)., • May assist in the training of other employees., • Participation in continuous improvement team and activities., • Training on thermoformer tool changes and startup of production and packaging equipment., • Effectively communicate information to other Team Members at shift change and to Maintenance Leadership using CMMS (Maintenance Connection), Work order documents, or logbook. Desired Skills • Complete knowledge of AC motors/controls, mechanical, hydraulic, and pneumatic systems., • 2 years of completed technical school (AS Degree or equivalent)., • Certification in industrial mechanics through an accredited institution., • Must possess strong leadership skills, • Strong computer skills, • Good interpersonal skills, • Knowledgeable in Pneumatics systems., • Hydraulics systems., • PLC Systems Background/Drug Test/Everify $33.80/hr Monday through Friday from 7:50 AM to 4:20 PM Fresno, CA 93727 Please send resumes to cindym@elitestaffinginc.com and eliteolivebranch@elitestaffinginc.com All employees of Elite Staffing must be 18 years or older and authorized to work in the United States. Elite Staffing, Inc. is proud to be an equal opportunity employer. Our policy of equal employment opportunity is to recruit, hire, train and promote persons without regard to race, color, religion, national origin, sex, age, disability, handicap or any other protected status. Our hiring process may include the use of artificial intelligence (AI) to assist in recruiting candidates. AI may be used to collect information and grade, rank, or score your answers. All employment decisions are made by human reviewers. By submitting your application, you authorize Elite Staffing, Inc. to contact you using the contact information you have provided for employment-related activities via any method, including SMS, email, and phone calls, including through the use of automated technology, AI generative voice, and pre-recorded and/or artificial voice messages. For accommodations or to opt out of AI-assisted communication, you may unsubscribe from any SMS message and/or inform the AI technology of your request to opt out of AI-assisted communications. All personal information provided will be handled in accordance with our Privacy Policy found on our website. All employees of Elite Staffing must be 18 years or older and authorized to work in the United States. Elite Staffing, Inc. is proud to be an equal opportunity employer. Our policy of equal employment opportunity is to recruit, hire, train and promote persons without regard to race, color, religion, national origin, sex, age, disability, handicap or any other protected status.CB3

Job DescriptionStructural Steel Layout Fitter / WelderCompany: Paradigm Ironworks (DBA Alderette Designs, Inc.) Location: Riverside, CA Job Type: Full-Time, Permanent Pay: $25–$35/hr DOE Benefits: Medical + 401(k) match: 100% on first 2% + 50% up to 5% + PTO/sick time per policy Role Summary Paradigm Ironworks is looking for an experienced Structural Steel Layout Fitter / Welder to join our Riverside fabrication shop. This is a hands-on shop position for someone who can read structural steel shop drawings, accurately lay out and fit steel, and weld/fabricate assemblies with minimal supervision. We are looking for someone who takes pride in their work, understands the importance of accuracy, and can help us keep quality work moving through the shop. Must-Haves • Structural steel fabrication and layout experience, • Ability to confidently read and interpret structural steel shop drawings, • Ability to independently lay out centerlines, hole patterns, connections, squareness/diagonals, and handed parts, • Strong measuring, fitting, and fit-up skills, • Structural steel welding experience, • Current AWS welding certification(s), • Ability to understand weld symbols and connection details, • Strong attention to quality and accuracy, • Reliable attendance and professional attitude, • Ability to work independently as well as part of a teamCore Responsibilities, • Layout, fit, weld, and fabricate structural steel assemblies, • Work with beams, columns, HSS, channel, angle, plate, embeds, base plates, stairs, railings, and miscellaneous steel, • Read shop drawings and determine dimensions, orientation, connection locations, and fabrication requirements, • Mark, measure, square, fit, and verify parts before welding, • Perform structural welding in accordance with applicable procedures and requirements, • Verify dimensions, diagonals, hole locations, handed parts, and overall fit-up, • Identify drawing conflicts, missing information, or fabrication issues before material is cut or welded, • Perform self-checks before completed work moves to QC, • Maintain proper piece identification and material organization, • Use common fabrication equipment including saws, mag drills, ironworkers, torches, plasma cutters, grinders, and related shop tools, • Communicate problems or questions early so they can be resolved before creating rework, • Maintain a clean, organized, and safe work area, • Take ownership of assigned work and follow it through to completionCertifications & Experience, • Current AWS welding certification(s) required, • L.A. City welding certification is a strong plus, • Structural steel shop fabrication experience strongly preferred, • Layout and fitting experience strongly preferred, • Experience with structural and miscellaneous steel fabrication preferredOpportunity for Growth We are looking for someone who wants to become a strong part of our shop team. For the right person, there is opportunity to take on additional responsibility and grow into a lead or leadership position as Paradigm continues to grow. Advancement is based on demonstrated ability, reliability, quality, initiative, and leadership. What Success Looks Like • Layouts and fit-ups are accurate, • Fabricated assemblies match the drawings, • Parts fit correctly the first time, • Welding meets quality requirements, • Problems are caught before they become rework, • Work stays organized and identifiable, • Production keeps moving, • Issues are communicated early, • Assigned work gets completed and the loop gets closed