Mechanical engineering jobs in Albuquerque, New Mexico - Page 2Create job alerts

Ground Force/Mega of Albuquerque has an amazing opportunity for a skilled Mechanical Assembly Technician. The Assembly Technician is responsible for meeting production demands by completing jobs in a timely manner with attention to producing quality work. Must have experience in hydraulics, hoses, fittings, and schematics. Starting Wage $23-$28/hour depending on experience. This work will include, but may not be limited to assembling and installing components and subassemblies onto equipment being manufactured using a variety of methods and techniques such as drilling, tapping, punching, machining, wiring, low-voltage electrical, hydraulic plumbing (hard line and hose) and testing of the equipment according to design specifications. Position Requirements \n • Must have experience in hydraulics, hoses, fittings, welding and schematics\n, • High School Diploma (or equivalent);\n, • Three (3) years practical experience in the assembly of heavy machinery / equipment or other related disciplines as evidenced by employment history, training, certification, personal interview and/or practical tests as required.\n, • SKILLS - ability to perform specific technical tasks using normal tools used in equipment assembly such as the layout / termination / connection of wiring and plumbing, lay-out and installation of mechanical equipment and performing operational testing (and repair modification if required) of completed assemblies. In addition, the ability to work in a flexible environment while interacting with other disciplines (engineering, fabrication, stores, etc) and adapting to changing work priorities are essential.\n, • Ensure that all work performed is properly performed, inspected and documented in accordance with Company policy and procedure as well as customer expectations.\n, • Maintain the pace of production in their area of responsibility. BE AWARE AT ALL TIMES OF JOB DEADLINES!\n, • Ensure that the Lead is fully informed of the progress of the work under his supervision, including immediately notifying the Lead of problems that could result in work delays.\n, • Maintain an eye for safety and non-compliance issues. Immediate intervention in all unsafe / non-compliant activities is expected including immediately notifying the Lead of the problem!\n, • Review Job Master Work Authorizations, Drawings, Notes, and Change Orders in order to continually ensure that work being performed complies with specifications.\n, • Maintain a clean, safe and orderly work area. This is to include ensuring that parts and materials are properly controlled, shop supplies and tools are put away when not in use and any other items related to overall shop cleanliness.\n, • Coordinate work in progress with other personnel as required, including on-coming personnel during the day to day shift changes.\n, • Coordinate with the Lead and Quality Control to ensure the timely performance of required inspection functions.\n, • Ensure the efficient use of the time, tools and materials assigned to him.\n, • Ensure that all labor and materials used are allocated to the correct Job.\n All employees are expected to interact with other members of the organization in a professional and respectful manner, with the goal of producing on-time and high-quality work being the highest priority. All employees must maintain excellent communication with supervisors and engineers and a professional attitude and approach to issues within the company. We are a drug free workplace and require pre-employment testing. Benefits of Employment In addition to excellent career growth opportunities, Federal Signal Corporation offers a wide array of benefits including: bonus potential, insurance (life, medical, dental, vision), paid holidays, paid vacation, and 401(k) with matching contributions. We provide our employees with a smoke-free, drug-free workplace. About Us We are a "Solution Driven" manufacturer for the mining industry. At Ground Force/Mega Worldwide of Albuquerque we design, engineer and manufacture the World's Finest Mine Support Equipment. We offer a diverse product line for surface & underground mining and have trucks working in over 60+ countries worldwide. We have been providing our customers and dealers with custom solutions for 50 years. Our history of innovation and strong customer relationships around the world prove us a World Leader in our industry. For more information, visit . Federal Signal Corporation (NYSE: FSS) builds and delivers equipment of unmatched quality that moves material, cleans infrastructure, and protects the communities where we work and live. Founded in 1901, Federal Signal is a leading global designer and manufacturer of products and total solutions that serve municipal, governmental, industrial and commercial customers. Headquartered in Downers Grove, IL, with manufacturing facilities worldwide, the Company operates two groups: Environmental Solutions and Safety and Security Systems. For more information on Federal Signal, visit: . The Company is an equal opportunity employer. Qualified applicants will not be discriminated against on the basis of, and will receive consideration for employment without regard to, race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, status as a protected veteran, or any other protected category, characteristic, or trait under applicable law. If you require reasonable accommodation in the application process, contact Human Resources at [email protected]. All other applications must be submitted online. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Description About Leidos Leidos is a Fortune 500 company aimed at embracing and solving some of the world's most pressing challenges. Through science and technology, ___ Get familiar with ___, our radical program for employees to balance work & life. Job Description We are seeking a Lead Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast- paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Lead Engineer and Project Manager on electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 500 kV. Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. Successful candidate can expect a fast-paced, diverse work environment & flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the teams' full book of work. This position offers the successful candidate direct report responsibilities and the opportunity to further develop an already growing engineering team. The successful candidate will be able to communicate clear expectations, goals, and vision; manage the performance of direct reports; motivate, coach and mentor skilled professionals; and appropriately delegate project work. The candidate must be capable to manage collaboration and positive team culture to achieve successful results. Work Location: 100% REMOTE (must reside within the U.S., Mountain time zone is preferred). Job Functions • Direct multiple design teams simultaneously executing various projects and programs for multiple clients, • Develop a team of engineers by training, coaching, and nurturing Leidos' engineering talent, • Supervise staff by approving timesheets and running the annual performance review process, • Participate proactively as a member of the leadership team of the Transmission Line Section, • Create responses to RFPs, RFIs, and RFQs from clients for new work including proposal creation and definition of scope of work, • Possess a growth mindset to foster creative problem solving for our clients' most complex issues, • Promote continuous improvement to develop streamlined processes and tools that facilitate improvements to departmental technical resources via innovation and automation, • Delegate tasks to staff, forecast and plan their future workload, and run recruiting activities to support aggressive growth goals, • Drive the quality control process for the execution team to ensure the highest level of quality in all deliverables, • Liaise with clients to maximize affinity, facilitate business development growth, and foster long-term relationship building, • Manage the health of project portfolio by proactive project management in tracking scope, schedules, and budget with support from Leidos' Project Management Office Required Education & Experience: • Bachelor's degree in Civil, Electrical, or Mechanical Engineering; Civil Engineering is preferred, • 8+ years of relevant experience in the design of electric utility transmission systems with a Bachelor's degree, or 6+ years of such experience with a Master's, • Expertise in PLS-CADD and PLS-POLE, • Work effectively in team environment; can also work independently, • Track record of outstanding communication to serve as primary point of contact for existing and perspective clients, • Business acumen with a record of understanding and meeting key project performance metrics, • Working onsite in Leidos or client office is a possibility; some periodic travel may be required, • Ability and passion to develop staff through mentoring Desired Experience: • 2+ years of supervising staff, • Master's degree in Structural Engineering, • Experience with TOWER, • EIT or PE certification, • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus No two career paths will ever look the same. At___we know the most talented and diverse engineering professionals will always have a multitude of career choices; your time at Leidos will be a wise investment in your career and in yourself. Protect yourself and your family, with the___of working for a world-class employer. ___you join a Fortune 500 company and one of Ethisphere Institute's "World's Most Ethical Companies". PowerDelivery PDSTLINE If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. December 5, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote #Featuredjob

Job Description About Halo Materials Halo Materials is a venture-backed advanced materials company pioneering novel technologies to produce domestic, cost-competitive graphite for advanced energy and manufacturing supply chains. Headquartered in New Mexico, home to world-class national laboratories and a fast-growing deep tech ecosystem, we are building a scalable, lower-emissions process to produce high-performance graphite critical to the batteries that power grid storage, EVs, AI datacenters, drones, and consumer electronics. Our leadership team brings decades of experience building and scaling hard tech companies across energy, mobility, and advanced materials, with backgrounds at Tesla, Cruise, Pajarito Powder, and DOE-funded startups, including multiple ventures that have been successfully acquired. The founders care deeply about building technology that strengthens energy systems and domestic manufacturing, while cultivating a high-functioning, supportive team culture. Backed by Roadrunner Venture Studios, Halo combines ambitious research and engineering with the operational support, capital access, and long-term vision needed to grow both the company and the people inside it. About the Role Halo Materials is seeking an R&D Technician to play a critical role in enabling fast, high-quality experimentation. You’ll work closely with engineers and scientists to build, install, test, and maintain lab equipment that supports increasingly parallel and automated workflows. This is an ideal role for someone early in their career who enjoys working with their hands, solving practical problems, and contributing directly to cutting-edge technical development in a startup environment. Key Responsibilities * Support lab buildout efforts, including installation, calibration, testing, and troubleshooting of laboratory and pilot equipment. * Help enable more frequent and parallel experimentation by improving infrastructure and maintaining reliable systems. * Maintain a safe, organized, and effective lab and pilot environment. * Collaborate closely with R&D staff to execute experimental priorities. * Identify opportunities to improve lab workflows and equipment performance. * Uphold environmental, health, and safety (EHS) best practices in all lab activities. Qualifications * 1+ years of hands-on experience supporting R&D projects, including equipment installation, maintenance, or repair. * A craftsman-like mindset with pride in building and maintaining high-quality lab infrastructure. * A proactive and collaborative attitude when working with engineers and scientists. * Strong awareness of environmental, health, and safety best practices. * A hands-on, “get it done” mentality suited to a fast-paced startup environment. * Strong troubleshooting skills and comfort working around mechanical or process equipment. Nice to Have: * Experience in adjacent industries where similar high-temperature, catalytic, carbon, or materials growth processes are used — such as petrochemicals, advanced ceramics, specialty chemicals, battery materials, semiconductors, metallurgy, or industrial gas processing. What We Look For (Beyond the Resume) * A track record of execution — how you design experiments, make decisions with imperfect data, and drive results matters as much as where you’ve worked. * Comfort operating in both research and production environments; experience in one or both is valuable, but your ability to move science toward application is what counts. * Ownership mentality with high accountability and curiosity. * Entrepreneurial speed balanced with technical discipline. * Grit, resilience, and an ability to turn ambiguity into actionable next steps. Why Join Halo Materials? * Strengthen Energy & Supply Chains - Work on advanced materials that directly impact batteries, energy systems, and U.S. manufacturing resilience. * Scale Breakthrough Graphite Technology - Help scale a breakthrough graphite technology from lab experimentation to real commercial production. * Rigorous Science, Startup Velocity - Join a mission-driven team that values rigorous science, fast execution, and taking care of its people. * Technical Ownership & Autonomy - Take meaningful ownership in a technically ambitious environment where your contributions shape the direction of the company. * Competitive pay, full benefits, and equity - Competitive compensation, strong benefits, and the opportunity to grow quickly inside a serious deep tech venture backed by experienced builders. * Some of our Benefits: * An independent role with a supportive and flexible work environment * Time for self-development, research, training, conferences, or certification schemes * Full range of competitive benefits including a health care stipend and equity in a fast-growing startup

Job Description The Company: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: This role supports areas of field Service operation within Sungrow USA related to commissioning, warranty, and Operations and Maintenance (O&M) of the expanding installed sites in the region. Reporting to the regional field service supervisor, this position is responsible for troubleshooting, repairing, maintaining, and commissioning support of PV inverters and ancillary equipment/ systems, usually at the customer’s site or at a staging yard/warehouse. This position will comply with the Safety Mandate, “ZERO HARM,” to ensure safe and efficient work and operation of the facility for all personnel and equipment. Ensures that personnel and safety issues are given priority to maintaining a safe and efficient working environment. Implements and enforces safety management policy and procedures regarding the facility: safety information, hazard analysis, safe operations/Maintenance Training, subcontractor compliance, plant integrity, work permits, emergency planning, and response. Duties and Responsibilities: • Perform a variety of technical assignments involving the installation, operation, testing, and maintenance of string and central solar inverter and/or BESS Systems, PCS, batteries, and ancillary equipment., • Perform general troubleshooting and diagnosis under Sungrow’s maintenance and repair guidelines., • As needed, support and perform pre-commissioning (with and without grid emulator) and commissioning of solar inverters and BESS systems within schedule and work plans, • Additionally, for those on O&M capacity, perform Preventive Maintenance and other Long Term Service Agreement (LTSA) activities per the contract, • Investigate solar plant issues such as DC array grid faults, inverter design issues, and utility grid transients. For BESS positions, these investigations may also involve SOC checks and module /component-level troubleshooting, replacement of electrical/electronic parts, SW version updates, etc., • Provide feedback to the engineering and project team on possible mechanical and electrical design improvements., • Lead upgrade/rework projects (software and hardware) in the field and interact with customers to explain the project's technical scope and manage work schedule and commitments., • Work with customer SCADA engineers to set up systems communication and parameters involving Sungrow’s controllers and F&G systems as needed., • Accurately describes troubleshooting sequences and procedures which they have observed, • Identifies and documents basic mechanical and electrical issues and problems, • Performs basic corrective maintenance, • Create/modify Field Service procedures for safety troubleshooting and maintenance if required., • When using contractors on sites, act as the Lead to ensure the contractors submit daily activity reports and JSA reports and work follows Sungrow standards and expectations., • Prepare and submit own Daily Activity Reports and Daily JSA Reports., • Work independently in the field and with Design Engineers to resolve high-level technical issues, support the investigation of the root cause for technology applications for complex projects, • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar plant operations., • Verify and comply with engineering documentation standards and test procedures., • Completes documentation in a timely and organized fashion, • Follow level-appropriate standard operating procedures., • Own creation and submission of all field paperwork and documentation for full compliance with site documentation and project requirement, • Associate’s Degree in an Engineering or Computer Science Discipline from an accredited university or college, • Renewable industry experience is desired, • Power Electronics experience is desired, • OSHA 10 certificate within 12 months of date of hire, • Perform essential job functions using proper techniques that may include lifting, carrying, pushing, and pulling tools, equipment, and materials., • Lift and carry items weighing up to 50 pounds, with or without reasonable accommodation., • Engage in frequent standing, walking, bending, stooping, kneeling, crouching, and reaching during field assignments., • Work in a variety of field environments, including confined spaces, uneven surfaces, and varying weather conditions., • Follow all company safety policies and training requirements, including the use of personal protective equipment (PPE)., • Comprehend Job Hazard Analysis and conduct level-appropriate Job Hazard Analysis., • Proficient in the use of Microsoft Office, including Word, Excel, Outlook, PowerPoint, • Motivated self-starter with complex problem-solving abilities., • A ‘completer-finisher’ taking accountability for ideas from inception to delivery in an environment that requires robust metrics to confirm the success., • Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of partners, senior managers, and subject matter experts., • 3 plus years of overall experience in a technical field, • 2 years of experience in solar inverters or BESS, • Must possess the ability to work with test equipment and hand tools as required., • Must be able to closely follow instructions and pre-established procedures/SOP to perform the ductions of the job, • Must be proficient in Microsoft Office Suite (Word, Excel, PowerPoint and Outlook), • OSHA, NFPA70A, Electrical Safety, • Experience and/or certification with MV transformers a plus, • 80% Plus Work Location and Status: • Contract role, Albuquerque, NM area, • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated base pay for this role is between $36 to $40 per hour plus OT. This range does not include any other compensation components or other benefits that an individual may be eligible for. The base pay offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job Description National Carwash Solutions has grown over the past 45 years to become North America’s largest equipment, service, and cleaning solutions provider in the car wash industry. Our world-class brands are backed by the largest service network in the country with more than 300 dedicated service professionals and growing! Come join us for an extraordinary career in a high growth, team-oriented company! The Gig… The Service Technician l (STI) operates on-site to perform fundamental preventive maintenance and minor repairs on NCS vehicle wash equipment and accessories. They focus on learning core troubleshooting and maintenance procedures under direct supervision, with an emphasis on safe work practices and accurate documentation. What You’ll Do… • Assist in replacing, repairing, or adjusting parts and systems as necessary., • Inspect, calibrate, and check chemicals under supervision., • Run equipment through "cycles" to ensure basic system functioning., • Assist in advising customers of necessary service work and basic recommendations regarding replacement of worn or damaged parts., • Inspect equipment to ensure proper function., • Provide basic information to customers regarding proper operation and general maintenance of equipment., • Develop and maintain good rapport with customers, striving to provide positive service., • Deliver parts or supplies to customers when needed., • Complete work orders, expense reports, and daily/weekly time logs accurately., • Maintain up-to-date knowledge of equipment changes or modifications through training seminars, maintenance manuals, and service bulletins., • Assist in maintaining proper inventory of parts on service vehicles., • Comply with all service policies and procedures., • Keep Service Manager informed of all problems or difficulties., • High school diploma., • Ability to use basic math and writing skills., • Ability to travel assigned geography daily., • Ability to comprehend and interpret equipment, operating, and maintenance manuals and instructions., • Ability to successfully work independently or within a team., • Committed to customer satisfaction and ability to adapt/respond to different personalities., • Basic computer skills and email communication., • Ability to lift items of light to heavy weight, up to 75 lbs. Grow your career supported by an energized and passionate team, professional development, training, flexibility and opportunities for advancement. We offer competitive wages and benefits including comprehensive health, dental and vision coverage, matching 401(k), paid time off and more. National Carwash Solutions is a proud equal opportunity employer. We are a drug free, EEO employer committed to a diverse workforce. We will consider all qualified candidates regardless of race, color, national origin, sex age, marital status, personal appearance, sexual orientation, gender identity, family responsibilities, disability, education, political affiliation or veteran status.

Job Description Second Shift Welder and Machinist Job Description This role is responsible for the precise fabrication of mechanical components using a variety of machining and welding processes. The position involves operating machine shop equipment, performing manual metalworking tasks, and collaborating closely with Mechanical Engineers and Designers to determine optimal fabrication methods. The machinist follows established procedures, work instructions, and test protocols while documenting results accurately and maintaining a high standard of quality and safety. Responsibilities • Fabricate mechanical components using a range of machining and fabrication processes in accordance with applicable standards and procedures., • Operate machine shop equipment, including vertical mills, lathes, CNC machines, band saws, shears, press brakes, hydraulic presses, drill presses, and metal saws., • Perform manual metalworking tasks such as cutting, grinding, sanding, filing, and material removal, and apply various solutions as required by the job., • Interpret and work from blueprints, drawings, and work orders to produce accurate parts and assemblies., • Interface with Mechanical Engineers and Designers to discuss and refine fabrication methods, processes, and design considerations., • Set up, adjust, and operate welding equipment for MIG, TIG, and other welding processes as needed for fabrication work., • Use powered and hand tools safely and effectively to complete machining, fitting, and fabrication tasks., • Follow operational procedures and work instructions, ensuring compliance with quality standards and safety requirements., • Assist with the preparation of reports, documentation, and records, including following test procedures and accurately recording results., • Maintain a clean, organized, and safe work area, ensuring tools and equipment are properly stored and maintained., • Work independently and as part of a team to meet production schedules and project deadlines., • Comfortably perform work in confined spaces and at heights when required by the project., • Manage multiple priorities simultaneously while maintaining attention to detail and quality., • Understand and carry out written and oral instructions clearly and accurately., • Provide guidance and assistance to new or entry-level employees and, when requested, lead small project teams to achieve defined objectives., • Minimum of 5 years of experience in machining, welding, and fabrication, with strong practical knowledge of related procedures., • Proficiency in operating machine shop equipment, including vertical mills, lathes, CNC machines, band saws, shears, press brakes, hydraulic presses, drill presses, and metal saws., • Hands-on experience with machining and fabrication processes for mechanical components., • Ability to read and interpret blueprints and technical drawings., • Proficiency with Microsoft Office products, including Outlook, Word, and Excel., • Familiarity with AutoCAD for reviewing or working with mechanical designs., • Ability to understand and carry out written and oral instructions clearly., • Proven problem-solving skills with the ability to manage multiple priorities simultaneously., • Competence in using basic powered and hand tools for metalworking and fabrication., • Physical ability to stand, walk, move, climb, bend, crawl, reach, handle, push, and pull while operating tools and equipment., • Visual ability to focus on items less than 20 inches away (corrected or uncorrected), see in three dimensions, and distinguish all colors., • Eligibility to obtain a Secret security clearance., • Vocational or technical education in machining, welding, or a related technical field., • Experience with GTAW/TIG welding processes., • Experience with GMAW/MIG welding processes., • Background in shop fabrication, including layout, fitting, and assembly., • Experience in steel fabrication and structural fabrication., • Experience in welding fabrication across various structures and components., • AWS certification for various metals., • Experience with fitting and flux core welding processes., • Ability to perform structural work involving complex assemblies and structures., • Active TS/SCI security clearance or other active security clearance (desired but not required). This opportunity offers the chance to work on technically challenging fabrication and machining projects while collaborating closely with engineering and design professionals. You will apply and grow your expertise with a wide range of machining and welding equipment in an environment that values precision, safety, and continuous improvement. The role provides exposure to diverse assignments, including travel opportunities, and the possibility to mentor others and lead small project teams, supporting both professional development and career progression. Work Environment The work environment is a hands-on machine shop and fabrication setting that uses a full range of machining and welding technologies. You will regularly operate equipment such as vertical mills, lathes, CNC machines, band saws, shears, press brakes, hydraulic presses, drill presses, metal saws, and various welding machines for MIG, TIG, and other processes. Work involves frequent standing, walking, climbing, bending, crawling, reaching, handling, pushing, and pulling while using powered and hand tools. Tasks may require working in confined spaces and at heights, and visual acuity is important for close work, depth perception, and color differentiation. The environment emphasizes adherence to established procedures, safety standards, and quality practices while supporting collaboration with engineers, designers, and other skilled trades professionals. Hours and shifts may vary based on project needs, and some assignments require extended travel, including trips out of New Mexico for periods up to nine months Job Type & Location This is a Contract position based out of Albuquerque, NM. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

The Pulsed Power Sciences Center (1600) is accountable for advancing the understanding, development, and application of pulsed power for the missions of the nuclear weapons program. The Center also utilizes its major experimental, theoretical, and computational capabilities to meet the national security and fundamental science needs of diverse Sandia and external customers. Center 1600 is Sandia's primary organization for research in High Energy Density Physics (HEDP), Inertial Confinement Fusion (ICF), Advanced Radiography, Pulsed Power Science and Technology, and Fusion Technologies. The Pulsed Power Engineering and Design Group (1690) supports the engineering needs for the Pulsed Power Sciences Center by providing advanced engineering, design, and documentation services supporting current and future pulsed power machine development and maintenance. Additionally, the group supports other Sandia groups and external partners with engineering services by performing analysis, testing, and design. We provide the technical expertise needed to deliver and support robust, cost-effective pulsed power systems services. We maintain the required mechanical engineering and design staff needed to design, deliver, and support state-of-the-art pulsed power systems. This team is part of the Radiation, Electrical and High Energy Density Science (REHEDS) Research Foundation at Sandia. The main duties include, but are not limited to: • Create 3D models and drawings to build next generation accelerators and pulsed power machines., • Partner with engineers and scientist in developing designs., • Partner with engineers to discuss and interpret design concepts and identify requirements of detailed working drawings., • Collaborate with procurement, manufacturing, and suppliers to discuss design, schedule, manufacturing processes and materials selections to ensure contractual agreements are understood and achievable., • Manage documentation in collaborative engineering environment using product data management tools along with engineering authorization and approval processes and procedures. EDUCATION REQUIREMENTS • High school diploma plus three or more years of directly related experience in Computer Aided Drafting and Design (CADD), or equivalent combination of education and experience MINIMUM QUALIFICATIONS • Proficiency in creating mechanical product design definition to include 3D solid models and mechanical drawings, • Proficiency with PTC/CREO, PDMLink (Windchill), and Geometric Dimensioning and Tolerancing (GD&T), • Ability to obtain and maintain a DOE Q security clearance, • Ability to work in a diverse work environment,, • Satisfactory results of a pre-employment screening, which includes a background check and drug screening in accordance with Federal requirements (details below), DESIRED QUALIFICATIONS • Associate degree in Mechanical Engineering Technology, • Experience with foundational engineering principles related to design, manufacturing, configuration management and analysis, • Experience with Model Based Design (MBD) practices, • Experience with BIM (Building Integrated Model), • Ability to work in energetic and high-performance teaming environment, • Must be able to independently seek definition, evaluate, analyze, and then realize mechanical designs, definitions, and products, • Excellent communication skills with ability to present to diverse audience, • Previous experience on DOE sites and programs.

44569BR Requisition ID: 44569BR Business Unit: TSU Job Description: At CDM Smith, we're committed to connecting you with work that inspires and challenges you. Our employees collaborate on meaningful projects that enhance communities and make a lasting difference in the world. We deliver legendary service and smart solutions for environmental and infrastructure challenges, creating an unmatched experience for both our clients and our team. As a global engineering and construction firm, we partner with clients worldwide to develop innovative solutions that address today's needs and anticipate tomorrow's demands. We're looking for a skilled Mechanical Engineer with expertise in HVAC and plumbing systems. This role offers the chance to advance your career while working on projects that create resilient, sustainable environments. This position can be based out of any U.S. based office. We offer a hybrid work environment that allows our employees to balance time in the office with remote work from home. As a valued member of our Infrastructure and Services Group you would contribute to CDM Smith's mission by: * Designing and developing HVAC and plumbing systems, including master planning, feasibility studies, and mechanical systems such as co-generation. Incorporating sustainability principles, energy efficiency strategies, renewable energy solutions, and green building practices into projects ranging from basic to highly complex, ensuring compliance with client requirements. * Reviewing draft designs for compliance with federal, state, and local regulations. Ensuring that firm policies and practices are followed on all designs. * Performing site reviews and studies, as needed, to ensure designs are aligned with location specifications. Updating design requirements as necessary. * Contributing to the firm's Technical Knowledge Management by developing white papers and technical design documentation of new or special case designs, studies, etc. Submitting technical papers and designs for publishing to technical journals. * Attending industry conferences and symposia to enhance the firm's visibility and promote its products and services, collaborating closely with sales teams to maximize outreach and engagement. * Providing technical guidance and mentorship to junior staff, fostering their professional growth within the discipline and the firm. Supervising project work as needed, ensuring quality and supporting skill development for future leadership roles. * Performing other duties as required. Job Title: Mechanical Engineer 4 Group: ISO Employment Type: Regular Minimum Qualifications: * Bachelor's degree in Mechanical, Architectural or Chemical Engineering, or Engineering Technology or related discipline. Certification as an Engineer in Training (EIT) or passing the Fundamentals of Engineering (FE) exam in states where an EIT is not obtainable (within 18 months of hire or promotion or transfer). * 5 years of related experience. * Equivalent additional directly related experience will be considered in lieu of a degree. * Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Preferred Qualifications: * Experience working in a multi-disciplinary environment on large and complex projects. * Ability to mentor and guide junior engineers. * Prior experience using Autodesk Revit to create detailed mechanical drawings. * Knowledge of building codes, ASHRAE standards, and sustainable design practices. * Experience in high-performance building design (energy, water, carbon reduction). EEO Statement: We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. Why CDM Smith?: Check out this video and find out why our team loves to work here! () Join Us! CDM Smith - where amazing career journeys unfold. Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. Job Site Location: United States - Nationwide Agency Disclaimer: All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. Amount of Travel Required: 10% Assignment Category: Fulltime-Regular Visa Sponsorship Available: No - We will not support sponsorship, i.e. H-1B or TN Visas for this position Skills and Abilities: * Expert Knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices. * Expert Knowledge of engineer principles of design. * Expert Knowledge of Microsoft business software (excel, word, etc.). * Excellent verbal and written communications skills. * Expert knowledge of federal, state and local regulations. Background Check and Drug Testing Information: CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. Pay Range Minimum: $91,478 Pay Range Maximum: $160,118 Additional Compensation: All bonuses at CDM Smith are discretionary and may or may not apply to this position. Work Location Options: Hybrid Work Options may be considered for successful candidate. Massachusetts Applicants: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Title: Mechanical Engineer Job Category: Engineering Time Type: Full time Minimum Clearance Required to Start: Secret Employee Type: Regular Percentage of Travel Required: Up to 25% Type of Travel: Continental US The Opportunity: CACI has an excellent opportunity for an experienced Mechanical Engineer to its technical team in Albuquerque, NM. This position requires travel in the continental United States for various projects. Responsibilities: • Defines and develops new mobile/transportable shelter system designs., • Identifies relevant subsystems to include hydraulic, pneumatic, fuel, HVAC, power generation and other mechanical subsystems as required., • Assesses requirements and system architecture to develop mechanical design solutions to support existing hardware limitations., • Creates system specifications and ensures mechanical interface compatibility., • Analyzes and resolves design compatibility issues., • Coordinates design of mechanical system and subsystems for integration into a system of systems platform., • Coordinates and consolidates design efforts to include requirements definitions through testing verification., • Experience in transitioning completed designs into fabrication activities., • Conducts independent technical investigations including failure analysis and determination of root cause., • Experienced in Finite Element Analysis., • Experienced in technical writing to include engineering analysis, trade studies, feasibility assessments and analysis of alternatives., • Requires experience with interfacing with customers to include requirements clarification, providing technical status and delivering design presentations as required., • Experienced in developmental and qualification testing to include providing input to test plans and procedures, conducting testing evolutions and correcting deficiencies., • Perform site surveys and engineering assessments., • Develop drawings, User Guides, test plans, test procedures, rack elevations, equipment maintenance manuals and other documentation., • Quality inspection team member., • Work in a team environment., • Must be a quick learner that can apply technical knowledge and skills to reach a design solution in a timely manner under time constraints. Qualifications: Required: • BS/MS in mechanical engineering, with 5 years of demonstrated experience in support of DoD or other federal agency in a mechanical engineering capacity., • Must be proficient in Autodesk Inventor and MS Office suite Desired: • MS in mechanical engineering with 10 + years design experience with mobile/transportable systems for the DOD., • Professional Engineering License, • Active TS/SCI, • ACAD 3D What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you’ll be part of a high-performing group dedicated to our customer’s missions and driven by a higher purpose – to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You’ll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground — in your career and in our legacy. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. The proposed salary range for this position is: $60,100 - $123,200 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Description We are seeking Senior & Lead Transmission Line Engineers (multiple positions) who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidates will serve as Engineers on electric transmission line design projects for high-voltage (HV) and extra high-voltage (EHV) overhead and underground systems for some of the largest utilities in the country. They will apply NESC, ASCE, ACI and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, they will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare material procurement and construction documents. This will involve working with a multi-person Leidos team and interfacing with clients, project planning, environmental, permitting, and construction management personnel. Work Location & Compensation: • Work Location: 100% REMOTE (must reside within the U.S. Preference given to candidates willing to work hours aligned with the Mountain Time Zone (MT) to best support project teams/clients.), • Compensation: This posting is for multiple opportunities ranging in years of experience. Level of opportunity, including compensation, will be matched to a candidate's experience, qualifications, and demonstrated expertise. Minimum Knowledge, Skills, and Abilities (KSAs): • Mid - Senior Level: Bachelor's degree in civil or mechanical engineering with a minimum of four (4) + years of relevant experience in the design of electric utility transmission systems., • Lead Level: Bachelor's degree in civil or mechanical engineering with a minimum of eight (8) + years of relevant experience in the design of electric utility transmission systems This experience must include a minimum of two (2) + years of demonstrated leadership, mentorship, or supervisory experience over project teams and/or junior staff. Both Levels Will Require: • Experience in reviewing full transmission line designs including PLS-CADD models, foundations, material, plan and profiles, and construction packages, • Knowledge of NESC, ACI, AISC, and ASCE code requirements; construction specifications; material procurement process; project schedules; and construction work packages., • Develop project scopes, budgets, and proposals, • Ability to work effectively in team environment but also able to work independently, • Proven ability to communicate with clients and project teams, • Work in client office is a possibility and/or periodic travel may be required (up to 10-15%), • Program Expertise:, • Expert-level proficiency in PLS-CADD and experience with POLE., • Experience with foundation analysis software such as LPILE or FAD Tools., • Microsoft Office (Word, Excel, PowerPoint) Preferred Experience: • Professional Engineer (PE) License or Engineer-in-Training (EIT) certification., • Experience with GO95 standards (if working in applicable regions)., • Experience with Construction Management and Support., • Program Experience:, • PLS TOWER, • Bentley MicroStation, • Bentley ProjectWise, • Mathcad, • Autodesk AutoCAD Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News- Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, share your resume with us today! PDSTLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. April 30, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Job Description The DCS Air & Space Technology (AST) Sector is seeking a Modeling and Simulation Software Engineer to support extensive high visibility Modeling, Simulation, and Analysis (MS&A) efforts. Are you interested in working in a high-tech company on cutting edge technology to help solve national security problems? Do you want to be challenged every day supporting world class research and development? If so, DCS may be the place for you! DCS is an employee-owned organization known for creating agile technology solutions across the U.S. Defense, Aerospace, Human Factors, and Security markets. As a member of our team, you will support defense technologies along with research and development in Albuquerque, NM, having opportunities to work in a dynamic environment, with state-of-the-art simulation technologies, simulation integration experts, and experienced military Subject Matter Experts (SMEs). Our work focuses on conducting capability assessments for emerging military technologies and ensuring related tools and methodologies are suitable to inform Department of Defense (DoD) decision makers. Essential Job Functions: As this Modeling and Simulation Software Engineer, you could expect to: Collaborate with agile software development teams to design, develop, test, and deploy MS&A solutions. Collaborate with SMEs, such as modelers, analysts, and technologists, to identify requirements for system implementation in the Advanced Framework for Simulation, Integration, and Modeling (AFSIM) and other M&SA tools. Conduct software component and system integration testing to ensure compliance with specifications. Apply software best practices (version control, documentation, etc.) for all developed and modified software. Construct military behavior models and entities of varying complexity in AFSIM. Required Skills: Due to the sensitivity of customer related requirements, U.S. Citizenship is required. At least a BS degree in Computer Science, Aerospace, Electrical, or Mechanical Engineering, and 2 years of related experience. Applicants selected will be subject to a U.S. Government background investigation and must meet eligibility requirements for access to classified information. Must have an active Top-Secret level U.S. DoD security clearance. Experience developing object-oriented software in C/C++ with Visual Studio integrated development environment. Experience creating AFSIM software and tools, including source code and plugin development. Excellent written and verbal English communications skills. Ability to work well in team environments. Ability to travel, as required. Desired Skills: Familiarity with modern military systems, both foreign and domestic. MS in Computer Science, Aerospace, Electrical, or Mechanical Engineering. Experience with any of the following: Linux, CMake, Python, or Git. Familiarity with C#.

Job Description Pulsed Power Technician (Junior to Senior Level) I-Pulse Albuquerque LLC We are seeking innovative technicians with expertise in commercial pulsed power, power electronics, control systems, or high-temperature applications. Candidates should have a background in high-voltage systems, mechanical or electromechanical assembly, or high-temperature packaging, along with experience in 3D CAD design and prototyping. Who We Are: I-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth. I-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications. Responsibilities Include: • Collaborating with scientists, engineers, and designers to assemble and prototype hardware from concepts and designs., • Building and testing prototypes., • Integrating electronic subsystems and controls into high-voltage equipment., • Modifying mechanical and electrical designs., • Bachelor’s degree in electromechanical design or a related field (other degrees or relevant experience considered)., • 5–10+ years of experience in pulsed-power projects, mechanical engineering, electronics, or high-temperature prototyping/packaging., • Proficiency with CAD tools for 3D hardware drawings for prototypes and test assemblies., • Experience with high-temperature packaging for long-lifetime components., • PCB design and advanced high-temperature, high-reliability electronic packaging skills., • Ability to manage schedules and project costs., • Experience documenting design changes, failures, and corrective actions., • 15–20 years of experience in pulsed power, power electronics, or electromechanical design for government or industry., • Prototype or commercial hardware design experience. I-Pulse Albuquerque, LLC is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, disability, or protected Veteran status. We offer competitive salaries and comprehensive benefits, including medical, dental, vision, 401(k), and PTO. Company DescriptionI-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth. I-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications.I-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth.\nI-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications.

Job Description Computational Physicist (Early, Mid-Career, or Senior Level) I-Pulse Albuquerque LLC We are seeking an innovative physicist to conduct hydrodynamic and 3D electromagnetic simulations for commercial pulsed-power applications. Candidates should have a background in physics, electrical engineering, applied physics, or mechanical engineering and will join a growing team working on diverse projects. Who We Are: I-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth. I-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications. Responsibilities Include: • Collaborating with scientists, engineers, technicians, and program managers to scale pulsed-power systems for industrial applications., • Using simulation tools (e.g., FLASH, LS-DYNA, ALE, COMSOL, CST, HFSS) for MHD, circuit, and multi-physics simulations., • Modeling hydrodynamic, solid-matter interfaces, liquids, and pulsed-power system scaling., • Managing computing systems and diverse operating systems (Linux, macOS, Windows) or small clusters., • Presenting work at design reviews, managing schedules, and tracking project costs., • Analyzing theoretical simulation results and experimental data., • Documenting theoretical results., • Bachelor’s degree (with experience) or Master’s in physics, electrical engineering, or a related field., • 2–10+ years of experience in advanced simulations., • Experience in research, development, or prototyping environments., • 20+ years of experience in simulations or related projects for government or industry., • Expertise in theoretical physics, electrical engineering, or applied physics. I-Pulse Albuquerque, LLC is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, disability, or protected Veteran status. We offer competitive salaries and comprehensive benefits, including medical, dental, vision, 401(k), and PTO. Company DescriptionI-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth. I-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications.I-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth.\nI-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications.

Job Description Pulsed Power Engineer (Junior to Senior Level) I-Pulse Albuquerque LLC We are seeking innovative pulsed-power engineers with a focus on commercial applications. Candidates should have a background in electrical engineering, physics, applied physics, or mechanical engineering. Who We Are: I-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth. I-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications. Responsibilities Include: • Collaborating with scientists, engineers, technicians, and program managers to develop advanced pulsed-power systems., • Using simulation tools (e.g., COMSOL, CST, SPICE, Screamer, FLASH, LS-DYNA) for circuit, electromagnetic, and multi-physics simulations., • Modeling hydrodynamic and solid-matter interfaces and scaling pulsed-power systems., • Designing high-temperature, long-lifetime, high-reliability pulsed-power systems., • Developing PCBs and advanced high-temperature electronics., • Presenting work at design reviews, managing schedules, and tracking project costs., • Conducting theoretical and experimental analysis., • Documenting results, failures, and corrective actions., • Master’s degree in physics, electrical engineering, or a related field (B.S. considered with sufficient experience)., • 5–10+ years of experience in pulsed-power projects., • Experience in research, development, or prototyping environments., • 20+ years of experience in pulsed power or related projects for government or industry., • Expertise in experimental electrical engineering or applied physics. I-Pulse Albuquerque, LLC is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, disability, or protected Veteran status. We offer competitive salaries and comprehensive benefits, including medical, dental, vision, 401(k), and PTO. Company DescriptionI-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth. I-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications.I-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth.\nI-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications.

Job Description Raven Defense Corporation Albuquerque, NM Company Overview: Raven Defense Corporation is a cutting-edge technology company based in Albuquerque, NM, specializing in engineering services, expert program consultation, and advanced technical equipment. Our focus areas include cybersecurity compliance, deployable sensors, and research, development, test, and evaluation (RDT&E) systems. Founded in 2018 as a privately held small business, we pride ourselves on being an agile and responsive partner that adapts to evolving customer needs in the defense and aerospace sectors. Position Overview: Raven Defense is seeking a skilled and detail-oriented Mechanical Technician to support the fabrication, assembly, testing, and integration of complex mechanical and electro-mechanical systems. This role involves working with precision-machined components, enclosures, brackets, and structural assemblies for defense and aerospace applications. The ideal candidate will be hands-on, mechanically inclined, and able to work collaboratively in a fast-paced environment. Key Responsibilities: • Assist in the fabrication, assembly, and integration of mechanical and electro-mechanical systems., • Read and interpret engineering drawings, blueprints, and technical documentation., • Conduct mechanical system testing, troubleshooting, and adjustments to ensure functionality and performance., • Utilize hand tools, power tools, and precision measuring instruments to perform assembly and modifications., • Collaborate with engineers and technicians to support prototype development and system improvements., • Maintain detailed records of assembly procedures, modifications, and test results., • Follow safety guidelines, quality standards, and industry best practices., • High School Diploma, GED, or equivalent., • Hands-on experience in mechanical assembly, fabrication, or manufacturing., • Proficiency with hand tools, power tools, and measuring instruments (calipers, micrometers, etc.)., • Ability to read and interpret technical drawings, schematics, and work instructions., • Strong problem-solving skills and attention to detail., • Ability to work independently and collaboratively in a dynamic environment., • Experience with defense, aerospace, automotive, or industrial manufacturing., • Knowledge of machining, welding, or CNC operation., • Familiarity with environmental testing and quality assurance procedures., • U.S. Citizenship is required for this position., • Work on cutting-edge defense and aerospace technologies., • Be part of a high-performance, hands-on engineering team. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Health insurance, • Life insurance, • Paid time off, • 8 hour shift, • Monday to Friday Raven Defense Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training Company DescriptionRaven Defense is a technology company based in Albuquerque, NM dedicated to providing high quality engineering services, expert program consultation, and highly specialized technical equipment to meet our customer’s demanding requirements in deployable sensors for flight test support as well as cutting-edge research, development, test and evaluation systems. Established in 2018 as a privately held small business, Raven Defense is focused on being an agile and responsive partner able to react to changing customer needs.Raven Defense is a technology company based in Albuquerque, NM dedicated to providing high quality engineering services, expert program consultation, and highly specialized technical equipment to meet our customer’s demanding requirements in deployable sensors for flight test support as well as cutting-edge research, development, test and evaluation systems. Established in 2018 as a privately held small business, Raven Defense is focused on being an agile and responsive partner able to react to changing customer needs.

Job Description Mechanical Engineer (Junior to Senior Level) I-Pulse Albuquerque LLC We are seeking innovative mechanical engineers with a passion for commercial pulsed power or high-temperature applications. Candidates should have a background in mechanical engineering or applied physics, with expertise in areas such as plasma physics, mining, thermal transport, or commercial applications, including theoretical and experimental analysis. Proficiency in mechanical design and materials is highly valued. Who We Are: I-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth. I-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications. Responsibilities Include: • Collaborating with scientists, engineers, technicians, and program managers to develop cutting-edge pulsed-power systems., • Using simulation tools (e.g., COMSOL, CST, LS-DYNA, FLASH) for FEA, thermal analysis, and 3D shock-wave simulations to predict material performance under shock waves., • Modeling hydrodynamic and solid-matter interfaces and scaling pulsed-power systems., • Designing high-temperature packaging for long-lifetime components., • Developing PCBs and advanced high-temperature, high-reliability electronic packaging., • Presenting work at design reviews, managing schedules, and tracking project costs., • Conducting theoretical and experimental analyses., • Documenting results, failures, and corrective actions., • Master’s degree in mechanical engineering or a related field (B.S. considered with sufficient experience)., • 5–10+ years of experience in pulsed-power projects, mechanical engineering, or high-temperature packaging., • 20+ years of experience in pulsed power or related projects for government or industry., • Expertise in experimental or theoretical mechanical engineering. I-Pulse Albuquerque, LLC is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, disability, or protected Veteran status. We offer competitive salaries and comprehensive benefits, including medical, dental, vision, 401(k), and PTO. Company DescriptionI-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth. I-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications.I-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth.\nI-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications.

We are seeking a R&D Mechanical Engineer (job title: R&D S&E, Mechanical Engineering) to support research activities related to structural modeling and characterization of fiber-reinforced polymer composites. Bachelor's degree in a relevant discipline and five (5) years of directly relevant experien

Job DescriptionCompany Description We Are Bosch. At Bosch, we shape the future by inventing high-quality technologies and services that spark enthusiasm and enrich people’s lives. Our areas of activity are every bit as diverse as our outstanding Bosch teams around the world. Their creativity is the key to innovation through connected living, mobility, or industry. Let’s grow together, enjoy more, and inspire each other. Work #LikeABosch • Reinvent yourself: At Bosch, you will evolve., • Discover new directions: At Bosch, you will find your place., • Balance your life: At Bosch, your job matches your lifestyle., • Celebrate success: At Bosch, we celebrate you., • Be yourself: At Bosch, we value values., • Shape tomorrow: At Bosch, you change lives.Job Description The HVAC Trainer is responsible for developing and delivering technical and sales training programs across a wide range of audiences, including contractors, installers, sales representatives, distributors, and engineers. Training will cover HVAC systems with an emphasis on air-source heat pumps and their applications in residential and light commercial markets, including rooftop equipment. This role combines classroom instruction, hands-on field demonstrations, and digital learning delivery to build competency in installation, commissioning, troubleshooting, and system performance optimization. The Trainer will collaborate closely with Sales, Product Management, and Quality teams to ensure training content reflects real-world needs, regulatory requirements, and evolving industry trends such as electrification and energy efficiency. The Trainer is accountable for ensuring participants leave training sessions with practical skills, while also serving as a key partner to distributors and contractors to help build confidence in Bosch products and solutions. Travel Expectation: Ability to travel up to 70% within the assigned region, with some flexibility for virtual training delivery. Qualifications • 7 years of HVAC field experience, including installation, commissioning, and troubleshooting of heat pump systems, rooftop equipment, and related HVAC applications., • One year of experience facilitating technical training or product education in either classroom or field environments., • Bachelor’s degree in Mechanical Engineering or equivalent technical discipline., • Experience with inverter/variable speed heat pumps., • Knowledge of residential and light commercial HVAC applications., • Demonstrated ability to create digital training content (videos, presentations, or interactive modules)., • Familiarity with market trends in electrification, decarbonization, and energy efficiency., • Hands-on experience with HVAC service and commissioning. Additional Information Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable. Additional Information The U.S. base salary range for this full-time position is between $110,000-$130,000. Within the range, individual pay is determined based on several factors, including, but not limited to, work experience and job knowledge, complexity of the role, job location, etc. This range does not include annual bonus percentage nor any other monetary considerations for the total compensation package. Your Recruiter can share more details about the specific salary range for this position during the interview process. In addition to your base salary, Bosch offers a comprehensive benefits package that includes health, dental, and vision plans; health savings accounts (HSA); flexible spending accounts; 401(K) retirement plan with an attractive employer match; wellness programs; life insurance; long term disability insurance; paid time off; parental leave. Pay ranges included in the postings, when included, generally reflect base salary; certain positions may include bonus, or additional benefits. Equal Opportunity Employer, including disability / veterans *Bosch adheres to Federal, State, and Local laws regarding drug-testing. Employment is contingent upon the successful completion of a drug screen and background check. Candidates who have been offered the position must pass both screenings before their start date.

Job Description Longenecker & Associates (L&A): A Geosyntec Company seeks a motivated CAD Technologist to contribute to our mission supporting our work in New Mexico. L&A is a woman-owned small business and trusted partner enabling critical missions across the U.S. Department of Energy (DOE) complex for more than 30 years. We contribute to DOE’s nuclear security and environmental remediation enterprise by providing the highest-caliber staff and experts. L&A is unconditionally committed to mission success and the well-being of employees, the nation and the environment. Our team members are passionate about building a healthier environment for generations to come. We are a community that interfaces and effectively communicates with all levels of management and government. If you have a passion for excellence, seek opportunities to engage in mission critical work, and consistently exceed expectations, apply now to join our professional family. POSITION DESCRIPTION The Pulsed Power Sciences Center (1600) is accountable for advancing the understanding, development, and application of pulsed power for the missions of the nuclear weapons program. The Center also utilizes its major experimental, theoretical, and computational capabilities to meet the national security and fundamental science needs of diverse Sandia and external customers. Center 1600 is Sandia's primary organization for research in High Energy Density Physics (HEDP), Inertial Confinement Fusion (ICF), Advanced Radiography, Pulsed Power Science and Technology, and Fusion Technologies. The Pulsed Power Engineering and Design Group (1690) supports the engineering needs for the Pulsed Power Sciences Center by providing advanced engineering, design, and documentation services supporting current and future pulsed power machine development and maintenance. Additionally, the group supports other Sandia groups and external partners with engineering services by performing analysis, testing, and design. We provide the technical expertise needed to deliver and support robust, cost-effective pulsed power systems services. We maintain the required mechanical engineering and design staff needed to design, deliver, and support state-of-the-art pulsed power systems. This team is part of the Radiation, Electrical and High Energy Density Science (REHEDS) Research Foundation at Sandia. The main duties include, but are not limited to: · Create 3D models and drawings to build next generation accelerators and pulsed power machines. · Partner with engineers and scientist in developing designs. · Partner with engineers to discuss and interpret design concepts and identify requirements of detailed working drawings. · Collaborate with procurement, manufacturing, and suppliers to discuss design, schedule, manufacturing processes and materials selections to ensure contractual agreements are understood and achievable. · Manage documentation in collaborative engineering environment using product data management tools along with engineering authorization and approval processes and procedures. EDUCATION REQUIREMENTS · High school diploma plus three or more years of directly related experience in Computer Aided Drafting and Design (CADD), or equivalent combination of education and experience MINIMUM QUALIFICATIONS · Proficiency in creating mechanical product design definition to include 3D solid models and mechanical drawings · Proficiency with PTC/CREO, PDMLink (Windchill), and Geometric Dimensioning and Tolerancing (GD&T) · Ability to obtain and maintain a DOE L security clearance · Ability to work in a diverse work environment, · Satisfactory results of a pre-employment screening, which includes a background check and drug screening in accordance with Federal requirements (details below), · Ability to fulfill and promote L&A core values. DESIRED QUALIFICATIONS · Associate degree in Mechanical Engineering Technology · Experience with foundational engineering principles related to design, manufacturing, configuration management and analysis · Experience with Model Based Design (MBD) practices · Ability to work in energetic and high-performance teaming environment · Must be able to independently seek definition, evaluate, analyze, and then realize mechanical designs, definitions, and products · Excellent communication skills with ability to present to diverse audience · Previous experience on DOE sites and programs. LOCATION Albuquerque, NM PHYSICAL REQUIREMENTS AND WORKING CONDITIONS Successful candidates will be able to perform the essential functions of the job with reasonable accommodation. This job posting reflects management’s assignment of essential functions and the descriptions listed do not restrict management’s right to assign or reassign duties and responsibilities to this job at any time. PRE-EMPLOYMENT SCREENING Please note that marijuana remains a Schedule I controlled substance under Federal Law. Federal contractors must follow Federal drug-free workplace rules, which prohibit marijuana use, even if medical or recreational use is permitted under State Law. SALARY AND BENEFITS As an L&A employee, you will be eligible for a competitive salary as well as a comprehensive benefits package including healthcare (medical and dental), 401K plan, and paid time off. We believe in investing in our employees beyond compensation and as an L&A employee, you will have access to in-house training, career pathing, mentoring, award programs, tuition reimbursement and much more. L&A is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin, age, or status as a qualified individual with a disability or protected veteran.

Job Description Immediate Temp-to-Hire Position Software/Systems Engineer Job Description Join a dynamic small company where you'll gain comprehensive systems engineering experience from concept through development! Primary Qualifications: • Strong work ethic - We value dedication, reliability, and commitment to excellence, • Eagerness to learn - We're looking for engineers who thrive on continuous learning and professional growth, • Team collaboration - Ability to work effectively in our close-knit, collaborative environment Why Work for Our Small Company: • Comprehensive exposure - Work on all aspects of system design from initial concept through final development, • Systems engineering experience - Gain broad knowledge across multiple engineering disciplines, • Direct impact - Your contributions will have immediate, visible impact on projects and company success, • Mentorship opportunities - Learn directly from senior engineers and leadership, • Diverse project involvement - Exposure to aviation trainers, training components, gun active recoil devices, and dynamic motion seats, • Cross-functional collaboration - Work closely with mechanical, electrical, and systems engineers Skills and Abilities: • Good understanding of computer science, engineering, and mathematical analysis principles, • Physics and/or aerodynamics background is desirable but not required - we will provide training, • Ability to lead and direct design work of others, • Ability to partner with mechanical, electrical, and systems engineers to define design solutions, • Mentoring capabilities for other engineers, • Software development knowledge (training provided for gaps):, • C, C++, Linux, Windows, Microsoft Development Suite, Python, .NET, • Real-time, Embedded Systems, Object Oriented Design, Agile Methodologies Professional Behaviors We Value: • Punctuality and preparation, • Team collaboration and communication, • Meeting schedules and budgets, • Good planning and problem-solving practices, • Adaptability and continuous improvement mindset Education and Experience: Bachelor of Science (B.S.) in Computer Engineering/Software Engineering preferred • 5 - 7 years of experience desired, but we prioritize attitude and work ethic over exact experience match, • Equivalent experience and demonstrated learning ability will be considered Responsibilities: • Interface with electrical and mechanical engineering staff on new and existing designs, • Participate in design reviews with engineering and management, • Research, design, develop, and test systems-level software, compilers, and network distribution software, • Develop understanding of electro-mechanical controls and/or robotics (training provided), • Apply company configuration management procedures and processes, • Participate in configuration control board meetings as required, • Grow into a complete systems engineer through exposure to the full product development lifecycle What You'll Gain: • End-to-end systems experience - From concept sketches to deployed solutions, • Multi-disciplinary knowledge - Understanding of mechanical, electrical, and software integration, • Leadership development - Opportunities to mentor and lead as you grow, • Industry expertise - Deep knowledge of aviation training systems and advanced control systems Other duties as assigned Anticipated pay rate: $80+/- per hour - $165k +/- per annum) DOE We believe that the right attitude, strong work ethic, and willingness to learn are more valuable than checking every technical box. If you're passionate about engineering and ready to grow with a company that invests in its people, we want to hear from you. Company DescriptionBESTstaff is a New Mexico Small Business that has been providing quality staff augmentation for 16 years. The Albuquerque Journal through their Reader’s Choice Award Program has names BESTstaff as a top staffing firm for the last 8 consecutive years.BESTstaff is a New Mexico Small Business that has been providing quality staff augmentation for 16 years. The Albuquerque Journal through their Reader’s Choice Award Program has names BESTstaff as a top staffing firm for the last 8 consecutive years.

Job Description Raven Defense is a technology company based in Albuquerque, NM dedicated to providing high quality engineering services, expert program consultation, and highly specialized technical equipment to meet our customer’s demanding requirements in, deployable sensors, and cutting-edge research, development, test and evaluation systems. Established in 2018 as a privately held small business, Raven Defense is focused on being an agile and responsive partner able to react to changing customer needs. Raven Defense is searching for an experienced Mechanical Engineer to serve as the technical focal point for our mechanical design, modeling, and assembly operations in Albuquerque, NM. The ideal candidate will seamlessly bridge the gap between complex customer requirements and mission-ready hardware, working in a collaborative, cross-functional environment where your designs move rapidly from the screen to the field. Key Responsibilities: • Drive the full design lifecycle: from conceptual modeling and FEA simulation to COTS hardware selection, procurement and hands-on assembly, • Act as the primary technical liaison for customers and cross-functional stakeholders, • Oversee mechanical integration for airborne and maritime systems, ensuring compliance with DoD standards, • Bachelor of Science Degree in Mechanical Engineering, Design Engineering, or related field, • 3+ years’ experience in mechanical design, analysis, drawings, and hands-on integration, • Proficiency in the use of an integrated mechanical design tool suite (i.e. SolidWorks, Autodesk, etc.), • 5+ years’ experience in system design and analysis relative to Mechanical Engineering, • Working knowledge of at least one discipline of; design-for-manufacturing, complex assembly modeling, FEA simulation, or defense industry mechanical/aerospace engineering standards., • Experience in airborne or maritime mechanical system integration and environments, • Thorough understanding of the whole design lifecycle and ability to work outside core function, • Proficiency in DoD guidelines and standards, design reviews, security procedures, testing protocols, and administrative standards, • Occasional travel, up to 25%, is required for this position. Travel will include customer and vendor visits in office/meeting environments as well as engineering support requirements which may include CONUS and OCONUS deployment aboard specialized RDT&E assets in support of customer requirements, • US Citizenship is required for this position. Salary: Dependent upon experience Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Health insurance, • Life insurance, • Paid time off Raven Defense Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Company DescriptionRaven Defense is a technology company based in Albuquerque, NM dedicated to providing high quality engineering services, expert program consultation, and highly specialized technical equipment to meet our customer’s demanding requirements in deployable sensors for flight test support as well as cutting-edge research, development, test and evaluation systems. Established in 2018 as a privately held small business, Raven Defense is focused on being an agile and responsive partner able to react to changing customer needs.Raven Defense is a technology company based in Albuquerque, NM dedicated to providing high quality engineering services, expert program consultation, and highly specialized technical equipment to meet our customer’s demanding requirements in deployable sensors for flight test support as well as cutting-edge research, development, test and evaluation systems. Established in 2018 as a privately held small business, Raven Defense is focused on being an agile and responsive partner able to react to changing customer needs.

Bachelor's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related technical field. Manage environmental and functional test campaigns (thermal vacuum, vibration, EMI/EMC, acoustic, deployment tests), including readiness reviews and anomaly resolution. Expert unde

Summary Redwire Space Missions has an exciting opportunity for a Principal Test Engineer and Assembly, Integration & Test (AI&T) IPT Lead at our Albuquerque, NM facility. Ideal Experience Bachelor's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related technic

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: *These benefits vary by job classification. What Your Job Will Be Like: We are seeking a field-proven technical systems analyst to join Sandia National Laboratories' Tonopah Test Range (TTR) team. This multidisciplinary group designs, develops, and supports advanced systems for national defense programs, homeland security, and non-defense applications. The team employs state-of-the-art technologies, including sophisticated software tools for design, analysis, modeling, and simulation. In this role, you will provide direct support to the range manager and his delegates, performing duties as directed. You will leverage your broad technical expertise in systems and network architectures to support field testing of experimental weapons, data capture, aircraft tracking, and cueing systems. Your demonstrated experience managing and analyzing technical systems in a remote field environment will be essential. You will apply your component-level knowledge of radar, optical tracking, telemetry/rf systems, and their associated integration architectures to analyze system integration challenges, develop and implement solutions, and assist with solution deployment. On any given day, you may be called on to: * Support the laboratories' flight test mission by maintaining the range's technical systems (optics, radars, telemetry, and others) in a test-ready status for data capture supporting stockpile surveillance flight test assessments. * Analyze and evaluate competing characteristics and performance factors between system elements to determine the most effective integrated system solution. * Integrate multiple Optical/RF/Digital Sensor Systems to optimize overall system performance in remote field-testing environments. * Troubleshoot and resolving technical system malfunctions and providing solutions development to enable range readiness supporting flight test missions. * Assist in strategic lifecycle management and technical systems recapitalization planning to ensure long-term sustainment and readiness. * Develop and refine range processes, procedures, and compliance documentation. * Ensure adherence to operational, facility, infrastructure, and safety requirements by following established range guidance and incorporating corporate safety and work planning processes. * Collaborate effectively within a multidisciplinary team and provide leadership as needed to field test support personnel. * Communicate clearly and professionally through written reports, presentations, and proposals. * Perform other duties as required to support Range operations. Location and Work Environment: This position is located at the Tonopah Test Range (TTR), near Tonopah, NV. Applicants must be willing and able to live and work at this remote site for 3-4 days per week. The role requires the ability to work independently and as part of a team, with transportation provided from a designated commuter location in Las Vegas, NV, if applicable. Salary Range: $97,500 - $190,200 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: * Bachelor's degree in a technical, engineering, or other relevant field--or equivalent and relevant experience in lieu of educational certification * Minimum of five (5) years of verifiable and directly relevant experience in electronics, electronics systems operations and maintenance, electro-mechanical systems, field engineering principles, or other technical disciplines. * Active DOE Q Clearance or equivalent to start. Qualifications We Desire: * Proven experience with both legacy and modern field test systems, including the ability to organize, lead, and sustain effective multidisciplinary technical teams. * Strong background in systems analysis, with demonstrated ability to recommend and implement solutions for complex system or equipment challenges. * Broad knowledge of varied technical approaches, with applied experience in integrating, troubleshooting, and diagnosing complex systems. * Experience working in remote field test environments; familiarity with Tonopah Test Range operations is a significant plus. * Current or prior DOE L or Q clearance, or Department of Defense equivalent, is highly desirable. * Experience in designing, planning, and executing technical projects with attention to detail and strategic objectives. * Familiarity with Sandia policies and procedures relevant to project execution and compliance. * Proficiency in operating and diagnosing a wide range of technical equipment related to systems and network analysis. * Ability to work effectively both independently and collaboratively within dynamic teams, maintaining professional conduct and clear communication of complex technical issues to stakeholders at all levels. * Commitment to working within structured Work Planning & Controls processes, ensuring safety and compliance. * Capacity to perform under high-stress conditions and meet tight deadlines without compromising quality. About Our Team: We are charged with the operation of the Tonopah Test Range. The TTR team is responsible for planning and executing the Flight Test portion of the Stockpile Surveillance program. Additionally, a requirement exists to plan and execute tests in support of other Federal Agencies. Posting Duration: This posting will be open for application submissions for a minimum of three (3) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Position requires a Department of Energy (DOE) Q security clearance to start, or equivalent active security clearance with another U.S. government agency (e.g., DOD). Sandia is required by DOE directive to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Job ID: 697553 Job Family: EN Regular/Temporary Position: R Full/Part-Time Status: F

Job Description Hazen and Sawyer is seeking an Assistant Engineer I or II for our Albuquerque office. As part of our design and process teams, you will work on water and wastewater projects, including drinking water/wastewater/reuse treatment facility upgrades, conveyance systems, wellfields, stormwater management, water resources, and asset management. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Assist in preparing engineering deliverables, including sampling studies, condition assessments, process modeling, hydraulics, and design reports, • Work directly with senior level engineering team providing mentoring opportunities to learn and develop, • Manage data for process modeling and design, • Attend client and internal project management meetings, • Coordinate with manufacturers and vendors to select equipment, • Support multiple projects from planning through construction, • Bachelor’s degree in environmental, civil, chemical, or mechanical engineering, • Strong interest in the water/wastewater industry, • Strong communication skills, self-motivation, organization, and attention to detail, • Must be proficient in Microsoft Office Suite, • 0-4 years of relevant experience within the water/wastewater industry that counts towards PE license, • Interest in hydraulic modeling, • Advanced degree (Master’s or Doctorate) in environmental, civil, chemical, or mechanical engineering, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

About Stellar Science: We are a growing Albuquerque-based computational science company seeking talented computer programmers to create and extend exciting scientific and engineering analysis applications. Majoring in physics, math, electrical/mechanical/aerospace engineering, computer science, o

Remote HVAC engineer in the Rockford, IL area needed! This Jobot Job is hosted by: Holly Leahy Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $120,000 per year A bit about us: As a full service consulting engineering firm, we have a vast amount of experience. With this experience, we offer a number of services: Electrical Power, Illumination, Electrical Controls, Primary Electrical Systems, Energy Management Systems, Plumbing, Heating, Ventilation and Air Conditioning. Our Heating, Ventilating, and Air Conditioning Department is available for all types of building options. Our design team provides years of experience. This allows for many design applications to choose from as a solution to your needs. We can design a system that best fits your unique situation. Anything from a split system furnace to a 500 ton absorption chiller. Why join us? Fully Remote except for occasional site services 8AM-5PM but flexible 401K Match at 4% Health insurance on case by case Job Details Job Details: We are currently seeking a dynamic and highly-skilled HVAC Engineer to join our innovative team in the Engineering industry. The successful candidate will be responsible for designing, implementing, and overseeing the installation and maintenance of HVAC systems in both commercial and residential settings. This role requires a dedicated professional with a deep understanding of HVAC systems, project management, and a commitment to providing exceptional service to our clients. If you are a certified PE with a passion for problem-solving and a desire to work in a fast-paced, collaborative environment, we would love to hear from you. Responsibilities: • Design, implement, and oversee the installation and maintenance of HVAC systems in commercial and residential settings., • Conduct comprehensive assessments of existing HVAC systems and recommend improvements or replacements as necessary., • Collaborate with architects and contractors to ensure the successful integration of HVAC systems in building designs., • Prepare detailed reports and documentation, including designs, project costs, and compliance requirements., • Troubleshoot and resolve HVAC-related issues promptly and professionally., • Stay current with the latest HVAC technologies and industry trends to provide the most effective solutions to our clients., • Bachelor's degree in Mechanical Engineering or a related field., • Professional Engineer (PE) certification is required., • Minimum of 5 years' experience in commercial and residential HVAC engineering., • In-depth knowledge of HVAC systems, including design, installation, and maintenance., • Strong project management skills, with the ability to manage multiple projects simultaneously and deliver on time and on budget., • Proficiency in using industry-standard software for HVAC design and analysis., • Commitment to staying current with the latest HVAC technologies and industry trends. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Well-established contractor is seeking a skilled MEP PM to join their growing team! This Jobot Job is hosted by: Ryan Anderson Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $140,000 per year A bit about us: As a Permanent Mechanical PM, you will play a critical role in the construction industry. This position offers a thrilling opportunity to be part of an innovative team that focuses on delivering high-quality construction projects. You will be responsible for managing MEP (Mechanical, Electrical, and Plumbing) aspects of our diverse construction projects, including commercial and residential buildings. You will also have the opportunity to contribute to the design, installation, and maintenance of HVAC systems. This role offers a unique blend of technical, managerial, and creative challenges, making every day an exciting adventure. Why join us? Competitive compensation and benefits package! Job Details Responsibilities 1. Oversee all stages of project life cycle management, including initiation, planning, design, execution, monitoring, control, and closure of the MEP project., 2. Develop and implement MEP project plans and schedules to ensure timely completion of projects., 3. Manage and coordinate with team members and other departments to ensure all MEP aspects are synchronized and executed efficiently., 4. Monitor the progress of the project and make adjustments as necessary to ensure the successful completion of the project., 5. Coordinate with architects, engineers, and other construction and building specialists to ensure MEP systems are effectively integrated into the overall design and construction process., 6. Ensure all MEP systems meet the required standards and regulations while adhering to the budget., 7. Troubleshoot any issues with MEP systems and implement corrective measures., 8. Provide technical expertise and guidance in the inspection, testing, adjustment, and balancing of MEP systems., 9. Regularly report project status to stakeholders and senior management. Qualifications 1. Bachelor’s degree in Mechanical Engineering or a related field., 2. Minimum of 5 years of experience in MEP project management in the construction industry., 3. In-depth knowledge of HVAC systems, including design, installation, and maintenance., 4. Experience in managing commercial MEP projects., 5. Strong understanding of construction procedures, material, and project management principles., 6. Exceptional leadership and team management skills., 7. Excellent problem-solving abilities and a keen eye for detail., 8. Strong communication and interpersonal skills., 9. Proficiency in project management software., 10. Certifications in Project Management Professional (PMP) or Certified Construction Manager (CCM) would be an added advantage. If you have a passion for construction and a knack for mechanical systems, we would love to hear from you. This role provides an opportunity to showcase your skills and make a significant impact on our construction projects. Apply today and let's build the future together! Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Design innovative control systems that power the next generation of automated manufacturing. Join a tight-knit engineering team where your ideas go from concept to production. This Jobot Job is hosted by: Ryan Weingardt Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $95,000 - $125,000 per year A bit about us: Our client is a well-established automation solutions partner serving manufacturers across Wisconsin and Northern Illinois. They specialize in motion control, machine vision, robotics, and industrial automation. Known for their engineering depth and customer-first approach, they help companies reduce risk, improve quality, and accelerate innovation. You’ll join an organization that combines the agility of a design-build firm with the backing of a national technical group, giving you access to best-in-class tools, training, and support. Why join us? • Be part of a respected automation integrator with 25+ years of success in the Midwest, • Collaborate daily with degreed engineers who think like builders, not bureaucrats, • Engage in challenging, hands-on design work – every project is unique, • Excellent stability, professional growth, and technical mentorship, • Competitive compensation, strong benefits, and a collaborative team culture Job Details As a Controls Designer, you’ll develop and document prototype control panels and support the transition of designs into production. You’ll partner closely with engineering, manufacturing, and customers to define application solutions, select components, and ensure successful first-time builds. What You’ll Do: • Design, document, and refine control panel layouts, schematics, and wiring diagrams, • Collaborate with engineering teams and customers to define application requirements, • Identify and implement design improvements to optimize product performance, • Maintain design documentation, revisions, and QC instructions for production builds, • Ensure safety compliance and adherence to internal and UL design standards, • 2-year Technical Degree in Electrical or Mechanical Design (Bachelor’s in Engineering preferred), • Hands-on knowledge of machine control systems and AutoCAD Electrical, • Familiarity with UL standards, wire sizing, labeling, and documentation, • Strong attention to detail, design accuracy, and process discipline, • Ability to turn conceptual requirements into functional, manufacturable designs, • Experience in automation, control panel build, or machine integration environments preferred Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Position Summary Commitment to leading a mission critical environment that values continuous improvements. This position manages the installation and maintenance of mechanical systems at Data Centers and operations of specialized cooling systems. Acts as an Engineering resource for the complete H5 portfolio of mission critical facilities. Plans and monitors Building Management Systems and mechanical measurements. Maintains design documentation. Provides full life-cycle support to H5 Data Centers from concept design through site implementation and operations. This position reports to the Senior Vice President. Essential Job Functions • Participate in all aspects of mechanical design and engineering including development of basis of design, scope of work, implementation processes and commissioning plans., • Support maintenance of all H5 facilities mechanical systems to ensure 100% system availability., • Lead, review, and approve designs for data center upgrades which improve availability and efficiency, in addition to capacity increases and monitoring., • Update and maintain as-built master records, which includes transferring project drawings over to the master files., • Compare existing piping and HVAC systems against drawings and resolve discrepancies., • Develop and manage processes and programs to ensure the health and efficiency of mechanical systems within the data center., • Develop or review maintenance procedures for all mechanical systems including detailed scripts for annual maintenance and projects., • Support Operational teams in problem resolutions, Root Cause Analysis and design and process reviews., • Provide immediate technical support to operation teams during critical events, on-call., • Administers all aspects of the mechanical service agreements to ensure compliance., • Maintain all HVAC and mechanical drawings and process documentation., • Manage Energy efficiency., • Responsible for increasing efficiencies and maintaining reliability of all mechanical systems., • Estimate time and materials needed to complete repairs and new projects., • Some travel required. Qualifications Education: • Bachelor’s degree in mechanical engineering or equivalent experience., • Minimum 7 years in data center mechanical design, commissioning, and critical system support. Experience: • Experience in Data Center design, construction and commissioning including water cooled chiller plants, complex mechanical distribution systems, raised floor cooling system, automation, and control systems., • Experience reading, interpreting, and creating construction drawings, specifications, and submittal documents., • Project Manager experience is a plus. Skills and Abilities • Understanding of data center mechanical operations procedures, topologies (N+1, 2N, N+20%, etc.), equipment, piping systems, cooling towers etc., • Effective oral and written communication skills, with top tier analytical and problem-solving abilities., • Ability to refine mechanical system designs for availability, quality control, constructability, and cost efficiency., • Organized, detailed and successful at setting priorities and meeting deadlines and budget., • Understanding of both HVAC and mechanical equipment and system design., • Comprehensive use of AutoCAD, Visio, and Office software packages.

Job Description Position Summary This Electrical Engineering position manages the installation and maintenance of all electrical systems for H5 Data Centers and operations of specialized power systems. Act as an Engineering resource for the complete H5 portfolio of mission critical facilities. Responsible for Engineering standards, project scope definition, high level schematic design, engineering document review and construction support along with commissioning and turn-over to Operations. Maintains design and process documentation. Provides full life-cycle support to H5 Data Centers from concept design through site implementation and operations. Continuingly evaluate new and existing technologies for value. Some travel required. This position reports to the Senior Vice President. Essential Job Functions: • Participate in all aspects of electrical design and engineering including development of basis of design, scope of work, implementation processes and commissioning plans., • Work with internal teams and 3rd party engineering firms to select the right designs/equipment on projects/master plan including development of best standards., • Schedules and leads maintenance of national power systems to ensure 100% system availability., • Develops or reviews maintenance procedures for all power systems including detailed scripts for annual maintenance and projects., • Develop and manage processes and programs to ensure the health and efficiency of power systems within the data centers., • Be a subject matter expert on electrical items to help H5 effectively win new business., • Lead, review, and approve designs for data center upgrades which improve availability and efficiency, in addition to capacity increases and monitoring., • Support Operational teams in problem resolutions, Root Cause Analysis and design and process reviews., • Provide immediate technical support to operation teams during critical events, on-call., • Administers all aspects of the national electrical service agreements and vendors to ensure compliance., • Subject matter expert on electrical systems with customers effectively winning new business for H5 Data Centers., • Manages Electrical Sustainability program and utility power contracts and hedging. Qualifications: Education: • Minimum 5 years in data center electrical design, commissioning, and critical system support., • Experience in Data Center design, construction and commissioning including high voltage substations, complex power distribution systems, Battery and back-up systems, automation, and control systems., • Experience reading, interpreting, and creating construction drawings, specifications, and submittal documents., • Understanding of data center electrical operations procedures, topologies (N+1, 2N, 3/ 2N, Catcher, etc.), equipment, switchgear and transformers, UPS, generators, etc., • Ability to refine electrical system designs for availability, quality control, constructability, and cost efficiency., • Understanding of both mechanical and electrical equipment and system design., • Effective oral and written communication skills, with top tier analytical and problem-solving abilities., • Organized, detailed and successful at setting priorities and meeting deadlines and budget., • Comprehensive use of AutoCAD, Visio, and Office software packages.

Job Description A New Paradigm For Space Operations. Who We Are:Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. Position Overview: The Electrical Engineer will play a critical role in designing, building, and maturing prototypes for Space Kinetic's core technology. You will support the team in refining the electrical architecture of the current prototype and driving the system closer to a flight-ready configuration with each iteration. This role is ideal for someone who enjoys taking concepts from schematic to hardware, solving complex electrical challenges, and working closely with mechanical and manufacturing teams to bring cutting-edge space hardware to life. We are exploring electrical engineering opportunities in New Mexico and welcome qualified candidates interested in supporting innovative aerospace programs to connect with us for potential future roles. What You'll Do: • Design, develop, and build electrical prototypes for Space Kinetic's core technology., • Refine and finalize and the current prototype's electrical design to support all phases of prototype maturation., • Undertake and complete circuit design tasks, generate detailed schematics, and perform component selection aligned with environmental and system requirements., • Apply detailed tolerancing, design-for-manufacture principles, and thorough documentation across all electrical prototype phases., • Support PCB layout design and coordinate with external vendors for fabrication and assembly of PCB components., • Collaborate closely with the Space Kinetic manufacturing and engineering team to integrate electrical systems into mechanical assemblies., • Verify and validate your electrical designs through testing, troubleshooting, debugging, and iteration to improve system reliability and performance., • Actively participate in design reviews, contribute to system-level engineering discussions, and ensure the electrical subsystem progresses toward flight-readiness., • Support the creation and maintenance of electrical documentation, including BOMs, wiring diagrams, interface control documents (ICDs), and test procedures., • Ensure each design iteration moves the system closer to a flight-ready prototype aligned with Space Kinetic's 2-year flight demonstration goal. What It Takes: • Bachelor's degree in Electrical Engineering or a closely related STEM (Science, Technology, Engineering or Mathematic) field., • A minimum of 3–5 years of hands-on electrical engineering experience, ideally involving prototype development., • Proficiency in circuit design, schematic creation, and component selection., • Experience working with Schematic / PCB design tools (e.g., Altium)., • Demonstrated experience building and testing electrical systems or prototypes., • Strong understanding of electronics fundamentals, wiring practices, and system integration., • Ability to troubleshoot circuits, debug hardware, and iterate rapidly., • Experience collaborating with vendors for PCB fabrication and assembly., • Excellent documentation, communication, and cross-functional collaboration skill, • Ability to build and maintain a network of talented individuals. Prioritizes organizational and planning skills., • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder)., • Ability to maintain or obtain a Government Security Clearance. What We'd Love:, • Experience developing hardware for aerospace, defense, robotics, or similarly rigorous applications., • Familiarity with design-for-manufacture (DFM), design-for-test (DFT), and tolerance analysis., • Knowledge of embedded systems, field oriented controls, microcontrollers, sensors, and power electronics., • Experience with environmental or functional testing of electrical systems., • Hands-on experience with lab equipment (oscilloscopes, multimeters, power supplies, logic analyzers)., • Ability to work in a fast-paced startup environment with evolving requirements.Where You'll Be:, • Competitive Base Salary + Equity-Based Compensation, • Highly Competitive PTO and Holiday Calendar, • Comprehensive Medical, Dental, and Vision Coverage, • Unique Performance-Based Bonus Structure, • Health and Wellness Stipend Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status.

Job DescriptionSalary: Job/Position Summary The CAD Engineer is responsible for creating, managing, and modifying complex CAD and drafting designs. Works closely with engineers and project managers to develop innovative and cost-effective designs that meet the needs of the factory. Primary Responsibilities Create 2D lithography mask layouts in accordance with internal standards. Create 3D models and associated drawings to support manufacturing, testing, and other engineering needs. Support the creation of internal standards and tools for lithography mask layout and other CAD applications. Partner with Project Field Application Engineers and Project Managers to aid design integration into the Fab. Develop test structures and Design of Experiments to validate novel concepts and structures for risk mitigation. Produce data reports that are concise and easy to understand. Work directly and independently with customers to iterate on designs, refining them for successful fabrication. Support pre-fabrication processes, including project onboarding & quoting. Provide support for post-fabrication activities, including testing and assembly operations. Coding and testing software. Create plans and profile drawings. Finding technical solutions to meet a clients goals. Training and offering support and guidance to their team. Additional functions and duties assigned as required. Requirements Bachelors Degree preferred. 3+ years of experience in AutoCAD or other CAD packages. This position will require lawful access to ITAR/EAR controlled information, and employees in these roles will need to meet those requirements. Requirements include US Citizenship due to government contracts. Knowledge, Skills, and Abilities Familiarity with 2D CAD layout with complex Layer configurations (100+ Layers). Ability to read and understand drawings and associated standards. Ability to convert customer drawings into 2D CAD layouts following documented standards. Ability to design 3D CAD models to support mechanical requirements provided by engineering staff. Proficient with Microsoft Office products. Ability to learn software programs such as Autodesk CAD platforms. Excellent communication skills, detail-oriented with strong organizational skills. Physical/Working Requirements Must be able to wear personal protective gear most of the day (where applicable) Prolonged periods of sitting or standing Behavioral Traits Strong verbal and written communication skills to convey quality standards, expectations, and feedback clearly to team members and stakeholders. A willingness to adjust to changing circumstances, processes, or technologies for continuous improvement in dynamic environments. The ability to work well with others, fostering a cooperative atmosphere, driving data management initiatives and engaging all levels of the organization.

Job Description Overview Space Systems Engineer LOCATION: Kirtland AFB, NM (On-Site) JOB STATUS: Full-time CLEARANCE: DoD Secret Clearance TRAVEL: 10% Astrion is seeking a Space Systems Engineer to support spacecraft engineering, satellite operations, and ground system development for the Air Force Research Laboratory at Kirtland Air Force Base. This role is ideal for junior- to mid-level engineers with experience in Orbital Mechanics, spacecraft systems engineering, satellite operations, and the spacecraft development lifecycle. The engineer will support mission planning, spacecraft development activities, and on-orbit mission operations for small satellite programs. REQUIRED QUALIFICATIONS / SKILLS Education: Bachelor of Science in one of the following or a related technical field: • Aerospace Engineering, • Electrical Engineering, • Experience with scripting languages (e.g., MATLAB, Python), • Experience with spacecraft orbital simulation software (e.g., Systems Tool Kit (STK), FreeFlyer), • Experience with spacecraft development or satellite operations, • Strong analytical and problem-solving skills, • Ability to work independently and execute technical tasking, • Effective communicator with both technical and non-technical stakeholders, • Ability to lead technical discussions and coordinate engineering activities, • Strong technical documentation and organizational skills, • Professional experience in a space systems engineering or spacecraft operations role, • Experience supporting spacecraft mission planning or on-orbit operations, • Execute technical tasking from government engineers and program managers, • Support spacecraft systems engineering activities including requirements management, risk tracking, architecture trades, and orbit analysis, • Support on-orbit spacecraft operations and mission experiments, • Serve as mission manager or technical lead for small satellite missions when assigned, • Support the design, development, integration, and testing of spacecraft subsystems and ground systems, • Produce engineering documentation, reports, and analysis supporting mission development and operations, • Identify technical risks and support development of mitigation strategies, • Support spacecraft mission planning and experiment execution

Job Description Selected Interns or Co-op students will support object-oriented C++ software development in the following domains: space domain awareness (SDA), image simulation, space systems modeling, laser source generation and effects modeling, high power microwave systems modeling and simulation, computer vision, image processing, artificial intelligence (AI), machine learning (ML), atmospheric modeling, computational electromagnetics (CEM), high performance computing (HPC), computer aided design (CAD) tools, meshing, thermal modeling, and more. The main requirements are that candidates be top-notch, responsible, self-motivated, honest, able to work well independently or in small teams, and be able to rapidly learn new languages, tools, and techniques as needed to meet mission requirements. Applicants who convey a passion for developing quality code, through listed projects, a github link, or other software development experiences, will be given preference. This is a paid cooperative/internship learning experience. Minimum Requirements: • Majoring in physics, math, electrical/mechanical/aerospace engineering, computer science, or any relevant scientific or engineering field, • Ability to implement, understand, and maintain mathematical and scientific software libraries, • Software development experience in C++, • Must be available for full time employment within a year of completing this internship, • Cross-platform software development on Linux and Windows, • 3D graphics using OpenGL, Open Scene Graph, WebGL, Vulkan, • User interface development with Qt, Java Swing, Typescript, React, MaterialUI, • Supercomputing, CUDA, OpenMP, MPI, threads, GPU, • Image processing, imagery analysis, computer vision, computer aided design (CAD), meshing, • Aerospace vehicles, orbital mechanics, electromagnetics, space domain awareness, • Artificial Intelligence, Machine Learning, • Modeling and simulation About Stellar Science: We are a growing Albuquerque-based computational science company seeking talented computer programmers to create and extend exciting scientific and engineering analysis applications. We maintain high standards in all our software development efforts, utilizing modern development practices including continuous integration, test-driven development, pair programming, and code reviews in order to develop high quality, maintainable, and reusable code. By employing a lightweight development process, we remain highly productive and responsive to changing customer needs. Powered by JazzHR my4AC4VXHI

Job Description We have an exciting opportunity for experienced Electrical Engineers to join our team in Albuquerque. The qualified applicant will be able to demonstrate an established career in Electrical Engineering related to projects such as laboratories, hospitals, manufacturing, educational, and commercial facilities. In this position, the ideal candidate performs conceptual design through construction administration and post-occupancy, coordinating with multiple disciplines and as electrical engineer, ensuring projects are delivered within budget and on schedule. Other responsibilities of this position include: • Staying current on codes and technologies appropriate to the electrical disciplines, • Ensuring conformance with standards, established design practices, applicable codes, and technical adequacy of design and construction, • Organizing and conducting site visits for data collection and evaluation of electrical systems, equipment, components and materials for projects with and without well-defined scopes, • Developing and designing within a BIM design environment, • Completing assigned engineering and design tasks in accordance with client specified criteria and applicable codes and standards, • Reviewing junior team member’s work for quality and recognition of training opportunities, • Leading junior engineers in engineering design development and professional growth, • Collaborating with the internal and external project team to execute the project from concept to completion., • (For our Government Group): Successful candidates must be capable of obtaining and maintaining a security clearance. Bridgers & Paxton is one of the top 100 Mechanical, Electrical, Plumbing and Technology Consulting Engineering firms in the nation with a reputation for superb design services. Our clientele includes federal, state, and city agencies, colleges and universities, manufacturing and healthcare. We employ over 130 people, of which 55 are graduate engineers with 12 of those registered Engineer Interns and 37 registered Professional Engineers. This high ratio of engineers allows B&P to take on some of the most technically challenging projects and provides opportunity to have a successful and fulfilling career. With us, you can experience a wide variety of project types from Department of Energy laboratories to hospitals, manufacturing, educational, and commercial facilities. We look for the following ideal qualifications: • Minimum four-year college degree from an accredited engineering program, • Minimum of 5 years of electrical engineering experience within a consulting or design-build firm, • Professional Licensed Electrical Engineer is a plus, • Self-motivated with the ability to develop approaches to projects independently, and perform detailed execution of electrical design, • Communicates well verbally, in writing, and graphically, with other engineers, clients, and code authorities, • Project management skills, • Excellent problem-solving skills, • Strong personal ambition and work ethic, • Strong working knowledge of various building, electrical and energy conservation codes, • Strong working knowledge of the NFPA and other industry related standards, • Strong personal ambition to be a team player and provide guidance and mentoring to less experienced designer/engineers Our offices are located in three of the most beautiful and exciting cities in the West -- Albuquerque, NM, Mesa, AZ and Colorado Springs, CO. To be considered for this role, please apply via the link and attach your resume, cover letter and academic transcript to your application. B&P is an Equal Opportunity Employer. We've been named a 2024 Top Workplace by the Albuquerque Journal for our culture that values its people and amplifies talents. Powered by JazzHR WsZB3Er7MT

Job Description A New Paradigm For Space Operations. Who We Are:Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. What You'll Do: Interns acquire hands-on learning experience while working on meaningful projects to gain significant career experience. At Space Kinetic, we provide the tools, training and mentorship for interns to do their very best work and discover opportunities to advance their careers, providing a pathway for personal growth. For those who dream of changing the Universe, an internship with Space Kinetic is the place to start. As an Electrical Engineer Intern, this role will support the design, assembly, troubleshooting, and repair of electrical and mechanical systems. Candidates should possess strong engineering fundamentals and an understanding of quality control standards. The Electrical Engineering Intern will assist in wiring Space Kinetics prototype, this includes wiring sensors, motor drivers, computers between the hardware and electrical systems. The Intern will be working with Space Kinetic engineers on site, supporting testing of prototypes, collecting data, and providing reports to the engineering team. The person will also support installing sensors, setting up test stands, and monitoring equipment while in use. What It Takes: • Currently pursuing a degree in Electrical Engineering at an accredited college or university, • Experience working with electrical systems, • Passion for design, manufacturing, and testing of space systems and/or mechanisms., • Analytical, problem-solving, and electrical skills are required, • Comfortable working in a fast-paced, self-driven, rapidly growing entrepreneurial workplace, • Ability to work with minimal direction or support and to learn quickly; strong analytical skills; creative and innovative thinking; detail-oriented; calm under pressure; commitment to follow-through; enthusiastic with a talent for motivating others; receptive to criticism and open to others' ideas; and effective in written communication., • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder)., • Ability to maintain or obtain Government Security Clearance. What We'd Love:, • Prior experience with spacecraft design, • Experience working on a launch vehicle or satellite development effort, • Experience in a startup or agile development environment, • Passion for the commercial and government space industry., • Passion for spacecraft or launch vehicle system development. Where You'll Be: Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$20—$30 USD

Job Description We have an exciting opportunity for experienced Mechanical Engineers to join our Albuquerque, NM team. The qualified applicant will be able to demonstrate an established career in Mechanical Engineering related to projects such as laboratories, hospitals, manufacturing, educational, and commercial facilities. In this position, the ideal candidate performs conceptual design through construction administration and post-occupancy, coordinating with multiple disciplines and as Mechanical Engineer, ensuring projects are delivered within budget and on schedule. Other responsibilities of this position include: • Staying current on codes and technologies appropriate to the mechanical disciplines, • Ensuring conformance with standards, established design practices, applicable codes, and technical adequacy of design and construction, • Organizing and conducting site visits for data collection and evaluation of mechanical systems, equipment, components and materials for projects with and without well-defined scopes, • Developing and designing within a BIM design environment, • Completing assigned engineering and design tasks in accordance with client specified criteria and applicable codes and standards, • Reviewing junior team member’s work for quality and recognition of training opportunities, • Leading junior engineers in engineering design development and professional growth, • Collaborating with the internal and external project team to execute the project from concept to completion., • (For our Government Group) - Successful candidates must be capable of obtaining and maintaining a security clearance. Bridgers & Paxton is one of the top 100 Mechanical, Electrical, Plumbing and Technology Consulting Engineering firms in the nation with a reputation for superb design services. Our clientele includes federal, state, and city agencies, colleges and universities, manufacturing and healthcare. We employ over 130 people, of which 55 are graduate engineers with 12 of those registered Engineer Interns and 37 registered Professional Engineers. This high ratio of engineers allows B&P to take on some of the most technically challenging projects and provides opportunity to have a successful and fulfilling career. With us, you can experience a wide variety of project types from Department of Energy laboratories to hospitals, manufacturing, educational, and commercial facilities. We look for the following ideal qualifications: • Minimum four-year college degree from an accredited engineering program, • At least 7 years of mechanical engineering experience within a consulting or design-build firm, • Professional Licensed Mechanical Engineer, • Self-motivated with the ability to develop approaches to projects independently, and perform detailed execution of electrical design, • Communicates well verbally, in writing, and graphically, with other engineers, clients, and code authorities, • Project management skills, • Excellent problem-solving skills, • Strong personal ambition and work ethic, • Strong working knowledge of various building, mechanical, plumbing, fire, energy conservation, and fuel gas codes, • Strong working knowledge of the NFPA and other industry related standards, • Strong personal ambition to be a team player and provide guidance and mentoring to less experienced designer/engineers, • Experience with AutoCAD, Revit and other production related software is a plus To be considered for this role, please apply via the link and attach your resume, cover letter and academic transcript to your application. B&P is an Equal Opportunity Employer. We've been named a 2024 Top Workplace by the Albuquerque Journal for our culture that values its people and amplifies talents. Powered by JazzHR lSWpE5k5hr

Job Description About Fuse We are a (rad hard) team of builders, breakers, and fixers - delivering pulsed-power systems to accelerate the world’s transition to fusion. Customers span defense, energy, and aerospace; our pulsed-power platforms (e.g., TITAN, Z-STAR) support nuclear effects testing now and fusion plants tomorrow. About the Role You will be responsible for the assembly, wiring and plumbing on electromechanical systems. Systems include vacuum, power generation, pulse forming section and oil system. You must be able to read mechanical and electrical drawings to be able to assemble, field and troubleshoot these complex systems. Job Requirements * Assemble racks, HV/LV harnesses, enclosures, panels, and motion/actuation subsystems. * Install pumps, valves, seals, gauges; leak-check and maintain oil and vacuum systems. * Mount sensors, route signal cabling, and bring up data acquisition system (DAS)—oscilloscopes, probes, DMMs, and troubleshoot connection issues. * Read schematics and harness drawings; crimp/terminate to specification; label, route and document work. * Run electrical checkouts, resolve system noise, troubleshoot high voltage (HV) systems, and restore electromechanical systems to operational status. * Preventive/corrective maintenance, spares, calibration, and readiness of tools and materials. Responsible for calibration of oscilloscopes, power supplies, etc.- Execute HV/LOTO, ESD, rigging, and lift plans, proper use of PPE; maintain clear and concise safety records. * Capture build notes, monitor/maintain electromechanical systems, and feed improvements back to engineering. Minimum Requirements * 3–7+ years experience building and integrating complex electromechanical systems (emphasis in pulsed power). * Mastery of hand tools and metrology; expertise in electrical wiring and safety. * Experience working with high voltage/high current systems and precision timing of operations. * Ability to read mechanical design drawings and electrical/wiring diagrams and can provide improvement feedback to design teams. * Enhanced knowledge and operation of oscilloscopes, HV probes, leak detectors, electrical testers; working knowledge of ESD mitigation is required. * Clear and concise communication with operations crew and engineering team; ability to concisely document technical data and decisions. Desired Skills * Pulsed-power familiarity, ability to solder and build cables * Cleanliness/contamination control experience. * Machining/rapid-fab familiarity; basic CAD or ECAD experience. * Forklift/overhead crane, rigging, and safe lifting certs.

Job Description We're looking for mechanics who are looking to change careers. Mechanic. Tired of doing this? You want something new? You want to work in a clean shop? Not getting greasy every day. Less hard on your body. More fulfilling. We are looking for mechanics. We're just not going to hire you as a mechanic. We will train you. We train the right person. ABOUT LAD ENGINEERING LAD Engineering builds precision custom parts in Albuquerque, NM -- prototypes, one-offs, tight-tolerance components for aerospace contractors, government clients, and engineering firms. The parts we make end up in things that matter. We're growing, and we need good people. WHY MECHANICS The skill sets we need are already in other parallel industries -- and mechanics have them. Think about what you already do. You think through a sequence before you start. You are precise. You know when something is off before anyone tells you. You own your tools and your workspace. You finish the job. That is exactly what this work requires. The machines are different. The software is different. The material is metal stock instead of an engine. But the instinct -- that is the same. Mechanics who have made this move say it clicked faster than they expected. Because the mindset is already there. WHAT THE WORK ACTUALLY IS You will be setting up and running CNC machines. Programming tool paths. Loading material. Making cuts. Checking parts against spec with micrometers and calipers. Reading blueprints. Thinking in thousandths of an inch. Every job here is different. We are a prototype shop. That means every part is unique -- there is no running the same job all day on repeat. You will be solving a new problem on most shifts. You will be on your feet. The shop is clean and organized. Real equipment, real output, real standards. BE HONEST WITH YOURSELF The first 90 days are a learning curve. There will be days you feel like you are not getting it. Setup can take an hour before you make a single cut. If your setup is wrong, the part is scrap. You check your own work before it leaves your hands. You speak up when something is off before it becomes someone else's problem. If that sounds like a nightmare, this is not the right fit. No hard feelings. If that sounds like the kind of work that most people can't handle -- and you are the kind of person who takes pride in being better than most -- keep reading. THE PAY AND THE PATH • Trainee (0-90 days): $18-20/hr. You are on the clock while you learn. No experience required., • Machinist (90 days+): $20-24/hr. Running jobs on your own. Your skill drives your pay., • Experienced Machinist (12+ months): $24-28/hr. Complex setups, multiple machines., • Lead Machinist: $28-32/hr. Running the floor. This is the ceiling -- and it is worth reaching. WHO FITS HERE You own your mistakes. You do not let a bad part go because you do not want to deal with it. Rework costs everybody -- so we get it right the first time, and when we don't, we say so and fix it. You treat deadlines like they matter because they do. The parts we ship go to clients who have schedules downstream. Your work is someone else's input. You say something before it becomes a problem. Not after. You help without being asked. No politics. No drama. WHAT HAPPENS NEXT • Apply. Five minutes., • 15-minute phone call if your background looks like a fit., • 7 written questions by email -- honest answers, not perfect ones., • 45-minute face-to-face., • Time on the floor with one of our machinists -- see it firsthand., • Offer if it is a fit on both sides. If you have read this far, you are already different from most people who saw this posting. Apply now. Compensation: $18 - $32 hourly Responsibilities: • Set up and operate CNC machines to spec -- correct tooling, correct offsets, correct sequence -- producing parts that pass inspection the first time., • Read and interpret technical drawings, blueprints, and CAD/CAM files to understand part requirements before cutting., • Inspect finished parts using precision measurement tools -- micrometers, calipers, gauges -- and document results accurately., • Own the workstation and machine -- daily cleanliness, condition checks, and tool organization are part of the job., • Flag problems early -- communicate with Kendall or senior machinists before a job becomes a scrapped part., • Mechanical background -- professional experience with tools, machinery, or engines, • Valid driver's license and reliable transportation to our Albuquerque shop, • Ability to pass a background check and drug screening, • U.S. work authorization You do NOT need: • No CNC experience required -- we train from scratch, • No machining degree or certificate required LAD Engineering is a precision CNC machine shop built around one idea: we solve complexity. When engineers need parts that are hard to manufacture — tight tolerances, unusual geometries, materials that fight back — they come to us. We prototype. We go to production. We ship custom parts and assemblies to customers across the United States. ISO 9001:2015 certified. We're a small team with high standards and a clear direction. The people here give a shit about the work, communicate directly, and hold each other accountable in a way that makes the shop better. We're in the process of building a team and a reputation that will precede us — and every hire right now is part of that foundation.

Job Description Quality Control Inspector - Precision CNC Machine Shop MOST SHOPS NEED AN INSPECTOR. WE NEED SOMEONE WHO REFUSES TO LET A BAD PART LEAVE THE BUILDING. LAD Engineering is a precision CNC machine shop. Prototyping to production. Custom parts and assemblies are shipping to customers across the United States. ISO 9001:2015 certified. What we actually do: we solve complexity. Engineers come to us with parts that are hard to manufacture — tight tolerances, unusual geometries, materials that don't want to cooperate — and we figure out how to produce them efficiently, on time, and profitably. We're not posting this job to fill a seat. We're recruiting the person who will eventually own LAD's entire quality function. THE PATH Inspector (Training): Months 1-3: $22-24/hr • Full ownership of QMS, audits, customer quality relationships, and team development. This is the role our leadership team identified as the #1 hire the company needs. It's real, it's open, and it's yours to grow into. WHAT THE WORK ACTUALLY LOOKS LIKE You're standing at an inspection bench in a machine shop — not a climate-controlled lab. The floor vibrates when the big machines run. Coolant and chip smell is the background. You're working with micrometers, calipers, height gauges, and CMMs — measuring features down to tenths. When production is waiting on your sign-off to ship a $40,000 order, and you find a dimension out of spec, you call it anyway. That's the job. You'll read blueprints with complex GD&T callouts, write AS9102 First Article Inspection reports that survive customer audits, and disposition nonconforming material with machinists who don't always agree with your findings. Some days are methodical and focused. Some days, the shop is on fire with rush orders, and every machine is running. Both are on Tuesday. If that sounds exhausting, this isn't for you. If that sounds like the kind of work where your standards actually matter, keep reading. WHO BELONGS HERE • We Pursue Excellence. Rework costs money and time. If you're the person who checks a dimension twice because you'd rather be slow than wrong, you belong here., • We Are Driven by Customer Satisfaction. We send updates proactively. When a part is late or an issue comes up, we communicate it before the customer has to ask. If you treat the customer's specs like they're sacred, you belong here., • We Are Proactive Communicators. Issues are brought up as soon as they're found — not at the end of the shift, not next Monday. If you walk over and say, "This dimension is off," the second you see it, you belong here., • We Are One Team. We hold each other humbly accountable and grow from mistakes. If you can take feedback without getting defensive and give it without being a jerk, you belong here. WHY LAD ENGINEERING • Monday–Friday, flexible hours between 7 am and 5 pm. Overtime available, not mandatory., • Health insurance premium paid by employer (after 90 days)., • 401(k). PTO accrues immediately. 6 holidays + 1 floating holiday., • Performance incentive tied to shop profitability and customer returns — your work directly affects your pay., • Small team, real impact. Your ideas get heard. Your work gets noticed., • A real career path: Inspector to Lead to Quality Manager, with comp at every step. READY? Here's the process: application + screening questions - 15-minute phone screen - 7 written character questions by email - 45-minute in-person interview - shop ride-along (half shift). We designed this to be thorough, not to waste your time. If you've read this far and you're still here, you're already different from most applicants. That's the point. Compensation: $22 - $32 hourly Responsibilities: • Inspect incoming material, in-process parts, outside-processed components, and final assemblies to ensure every part that leaves LAD meets or exceeds customer specifications., • Interpret customer blueprints and complex GD&T callouts and translate them into accurate, repeatable inspection routines., • Produce complete, accurate, audit-ready documentation — including AS9102 First Article Inspection reports and internal nonconformance records., • Communicate nonconformances directly and immediately to production — issues are flagged as soon as they're found, not after they've compounded., • Support the calibration program and maintain controlled material inventory so the QMS runs clean., • High school diploma or GED, • Ability to read and interpret mechanical blueprints and GD&T callouts, • Basic algebra and trigonometry, • Experience with precision measuring instruments (micrometers, calipers, height gauges), • Ability to lift 50 lbs, • US Citizenship required You do NOT need: • A college degree, • A formal "Quality Inspector" title on your resume, • AS9102 experience — we train that LAD Engineering is a precision CNC machine shop built around one idea: we solve complexity. When engineers need parts that are hard to manufacture — tight tolerances, unusual geometries, materials that fight back — they come to us. We prototype. We go to production. We ship custom parts and assemblies to customers across the United States. ISO 9001:2015 certified. We're a small team with high standards and a clear direction. The people here give a shit about the work, communicate directly, and hold each other accountable in a way that makes the shop better. We're in the process of building a team and a reputation that will precede us — and every hire right now is part of that foundation.

Job DescriptionUDR is seeking qualified candidates for a Construction Manager opportunity in Albuquerque, NM Description The Construction Manager will provide overall day to day on-site administrative and technical management of all field-related personnel, subcontractors and work activities on a construction project site. These projects will be located in various locations and vary in scope and size. Responsible and accountable for all construction activity that occurs on the assigned project site, including but not limited to: safety, quality, project controls, materials, subcontractors, contract execution, client interfaces, client relations, engineering interfaces and start-up/commissioning interfaces. Direct, coordinate and supervise on-site discipline superintendents, scheduling, engineering, cost control, material control, commercial management, and administrative staff. Responsible for the overall project safety and compliance with the applicable Safety and Health Plans. This includes reviewing and auditing site specific safety documentation for Pre-Task Analysis (PTAs) and Task Safety Observations (TSOs) on a regular basis. Supervise and direct overall construction effort to verify project is sequenced and constructed in accordance with design, budget and schedule requirements. Responsible for efficient use of materials and equipment, and contractual performance of Subcontractors and Burns & McDonnell personnel. Enforce compliance with project procedures, safety program requirements, work rules and client requirements. Document all violations, notify project management, and recommend/implement corrective actions as required. Provide accurate performance feedback for all project team members. Develop and foster effective client and subcontractor relationships. Interface with client representatives, municipal authorities and other contractors as necessary to execute projects. Coordinate and communicate with the Engineering Manager and Discipline Engineers to plan and sequence engineering deliverables and resolve field engineering items. Collaborate with the project management team to develop and implement Project Execution Plans, project procedures, working documents, site procedures and project standards. Authorize purchase requisitions for field procurements under supervision of Project Manager. Review and approve subcontractor progress payments and Supplier invoices under supervision from Project Manager. Provide technical assistance, interpretation of drawings, and recommendation of construction methods and equipment installation. Complete daily, weekly and monthly progress reports in addition to other reports as necessary to document construction progress. Review all subordinate and subcontractor field reports. Assess future work activities and identify any concerns with work plans by utilizing 3-week look-ahead reports and the overall project schedule. Oversee and direct construction progress tracking and forecasting including Field Progress Measurement Systems, Critical Path Scheduling and commodity tracking systems. Oversee and direct the final construction documentation turnover process to clients. This includes construction turnover to clients or internal startup and commissioning teams. Provide site oversight and coordination of startup and commissioning teams. Supervise and enforce compliance with project Quality Management System. Read, interpret, and understand civil, structural, mechanical, electrical, controls and instrumentation drawings, specification and commercial documents. Performs other duties as assigned Complies with all policies and standards Requirements: High School Diploma/GED and 11 years construction management experience or craft supervision experience on a similar project. Required Strong understanding of all construction disciplines. Position requires excellent communications skills and supervisory skills of field construction personnel. Must be able to meet company's driving requirements. Computer proficiency in Microsoft Suite. UDR Consulting, INC is a Service-Disabled Veteran-Owned, Woman-Owned, Minority-Owned, Small Disadvantaged Business. An Equal Opportunity Employer that considers all qualified applicants for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, protected Veterans, or individuals with disabilities. UDR also supports a drug-free work environment. UDR offers highly competitive salaries and employee benefit packages structured to best suit your needs. We offer multiple individual and family benefit options including paid time off, medical, dental, life, vision, and disability insurance, and a pre-tax 401 (k) retirement account with Company matching contributions and 100% vesting for eligible participants beginning DAY 1. Powered by JazzHR r2sq4s3gvc

Job Description About Halo Materials Halo Materials is a venture-backed advanced materials company pioneering novel technologies to produce domestic, cost-competitive graphite for advanced energy and manufacturing supply chains. Headquartered in New Mexico, home to world-class national laboratories and a fast-growing deep tech ecosystem, we are building a scalable, lower-emissions process to produce high-performance graphite critical to the batteries that power grid storage, EVs, AI datacenters, drones, and consumer electronics. Our leadership team brings decades of experience building and scaling hard tech companies across energy, mobility, and advanced materials, with backgrounds at Tesla, Cruise, Pajarito Powder, and DOE-funded startups, including multiple ventures that have been successfully acquired. The founders care deeply about building technology that strengthens energy systems and domestic manufacturing, while cultivating a high-functioning, supportive team culture. Backed by Roadrunner Venture Studios, Halo combines ambitious research and engineering with the operational support, capital access, and long-term vision needed to grow both the company and the people inside it. About the Role Halo Materials is seeking a Project Development Manager to work closely with our CEO to lead the development and delivery of our first commercial-scale reactor, followed by a pilot plant. This role requires a key operational leader that sits at the intersection of engineering, construction, R&D, and executive leadership. You will manage external EPC partners, ensure technical integrity during scale-up, and serve as a critical bridge between our internal R&D team and external development stakeholders. You’ll bring structure and accountability while preserving the speed and ambition of a startup environment. This is a hands-on operational leadership position for someone who thrives in ambiguity, proactively creates structure and process out of white space, and collaboratively works with internal and external partners to solve problems and deliver projects on time and under budget. Key Responsibilities * Lead and manage an external EPC team through design, construction, and commissioning of a commercial reactor. * Serve as the internal accountability function by rigorously vetting design decisions and ensuring alignment with technical and operational goals. * Act as the primary interface between Halo’s technical teams and external engineering and development partners. * Source, evaluate, and diligence sites for lab expansion and pilot installations. * Identify and assess equipment vendors, balancing cost, quality, schedule, and technical performance. * Oversee permitting, compliance reporting, and environmental health & safety (EHS) considerations. * Drive cross-functional alignment across executives, engineers, contractors, and regulatory stakeholders. * Balance structured project governance with startup agility. Qualifications * 10+ years of experience managing infrastructure or industrial development projects. * Proven leadership of complex, multi-stakeholder projects involving industrial process scale-up. * Strong technical literacy across civil, mechanical, and electrical engineering disciplines. * Experience with permitting, regulatory compliance, and EHS frameworks. * Demonstrated success working closely with C-level leaders and managing competing priorities in fast-paced environments. * Exceptional organizational, analytical, and strategic thinking skills. * Ability to move fluidly between detailed tactical execution and high-level planning. * Clear and confident communication skills across technical and non-technical audiences. * A pragmatic mindset that balances rigorous safety and engineering standards with entrepreneurial urgency. Nice to Have: * Experience in adjacent industries where similar high-temperature, catalytic, carbon, or materials growth processes are used — such as petrochemicals, advanced ceramics, specialty chemicals, battery materials, semiconductors, metallurgy, or industrial gas processing. What We Look For (Beyond the Resume) * A track record of execution — how you design experiments, make decisions with imperfect data, and drive results matters as much as where you’ve worked. * Ownership mentality with high accountability and curiosity. * Entrepreneurial speed balanced with technical discipline. * Grit, resilience, and an ability to turn ambiguity into actionable next steps. Why Join Halo Materials? * Strengthen Energy & Supply Chains - Work on advanced materials that directly impact batteries, energy systems, and U.S. manufacturing resilience. * Scale Breakthrough Graphite Technology - Help scale a breakthrough graphite technology from lab experimentation to real commercial production. * Rigorous Science, Startup Velocity - Join a mission-driven team that values rigorous science, fast execution, and taking care of its people. * Technical Ownership & Autonomy - Take meaningful ownership in a technically ambitious environment where your contributions shape the direction of the company. * Competitive pay, full benefits, and equity - Competitive compensation, strong benefits, and the opportunity to grow quickly inside a serious deep tech venture backed by experienced builders. * Some of our Benefits: * An independent role with a supportive and flexible work environment * Time for self-development, research, training, conferences, or certification schemes * Full range of competitive benefits including a health care stipend and equity in a fast-growing startup

Job Description Summary: A Construction Project Manager will be assigned to mostly water and wastewater construction projects. This person participates as a member of the project team and coordinates with with field personnel to insure the jobs are completed within the time, budget, and specifications assigned. Essential Functions: • Establishing effective communication with owners, engineers and project team, • Establishing effective communication with subcontractors and suppliers, • Coordinate with Public Relations, Funding Agency, and Bldg. Inspectors, • Coordinate permitting: (CID, SWPP, Dig, City, County, Paving, Cut, Dust Control, Traffic Control, Plumbing, etc.), • Reviewing and approving material take offs, • Reviewing and approving subcontractor scopes, • Request schedule of values from Major suppliers and sub-contractors, • Purchase orders, • Develop, Maintain, & As Built schedules with MS Project, • Composing, reviewing and issuing project submittals, • Attends and ensures preparedness for project pre-construction conferences, • Composes, maintains and updates project field files, • Monitors and records quantities installed for pay application approval, • Approves quantities for pay application with engineer, • Assists superintendent with subcontractor management, • Approves Subcontractor pay applications, • Approves Supplier material invoices, • Attend and lead project meetings with Agenda & Updated Schedule, • Serve as main point of contact for all project communications, • Mark up Plans & Specs with Addenda, • Initiate change orders, change order requests, field orders and RFI’s, • Develop monthly status reports for projects, • Coordinate Safety trainings, • Monitor/Track safety incidents and report to Owner and Engineer at Progress Meetings, • Develop an Emergency Plan, • Procure equipment, • Manage materials, • Issue letters of intent, • Monitor contract days and request substantial completion, • Coordinate start-up and testing, • Assist with Demobilization, • Substantial completion walk-through, • Manage Close-Out and Punch list Secondary Functions: Job Scope: The Construction Project Manager plans, budgets, and oversees all aspects of their assigned projects. Project Managers work closely with upper management to make sure that the scope and direction of each project is on schedule. The Project Manager must be well-versed in construction methodologies and procedures and able to coordinate a team of professionals of different disciplines to achieve the best results. The ideal candidate will have an analytical mind and great organizational skills. Knowledge, Skills and Abilities: • Strong organizational skills, follow-through, accountability, and communication skills., • High degree of professionalism and strong work ethic with a desire to learn and grow in the construction industry, • Personable individual with excellent writing skills, good at researching, brainstorming, and networking, • Ability to work in a team setting as well as independently with limited guidance., • Working knowledge of reading blue prints/construction drawings, specifications, and contracts, • Working knowledge of the construction industry, construction planning, and scheduling, • Working knowledge of surveying and construction grade checking, • Proficient in Microsoft Office programs including Word, Excel, Project, and Outlook Other Qualifications: • Must be able to travel to the jobsite(s) as assigned, • Must be willing to work overtime when necessary Education and/or Experience: • Bachelor’s degree in Construction Management, Civil Engineering, Mechanical Engineering or related degree program from an accredited four-year college or university., • Experience in civil infrastructure, industrial, street improvements, underground utilities, and waste/wastewater treatment facility work. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups. Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply basic concepts of algebra and geometry. Mandatory Testing: Must be able to pass a Pre-Employment Physical, Drug, and Alcohol Test. Company DescriptionWater and Wastewater contractor that works across NM and West TexasWater and Wastewater contractor that works across NM and West Texas

Job Description HIRING A PROJECT MANAGER IN ALBUQUERQUE ACCOUNTABILITY Responsible for the profitability and successful execution of projects including the quality of work performed, client service, business development, utilization of staff, reputation of the firm, contract management, billing and project profitability. ESSENTIAL CHARACTERISTICS • Maintain an Open-Door Policy, • Demonstrate the ability to lead, motivate and train designers in a mature, thoughtful, professional and pleasant manner., • Ability to aide in the development of technical skills of subordinates., • Work with the Partner in Charge to identify, evaluate and pursue (self and with/through others) priority BD opportunities that will increase revenues to levels required by marketing and business plans, and then execute the work to the client’s satisfaction. Work with the Partner’s and other Project Managers to assess targeted market potential, and to select target clients that fulfill the marketing plan and budget., • Assist in providing oversight of client/proposal tracking activities; management and review of Requests For Proposal’s (RFP’s), Statements of Qualifications (SOQ’s) and proposals., • Works with all involved disciplines, prepares estimated labor requirements, schedules and other pertinent data; participates with Partner in Charge in preparing fee proposals, conducting fee negotiations, preparing contractual agreement; and is sufficiently familiar with all agreements between firm and client to effectively manage the project in a professional and economic manner., • Ascertain that code checks are made and zoning status is acceptable and coordinates with proper building officials., • Reviews the documents prior to timely submission of documents to the client for in-house and client “milestone” progress reviews to ensure all documents are in place and submitted to the client., • Provides engineering oversight on all engineering disciplines involved in the project. Provides corrective instruction to design staff on engineering issues., • Participates in design to a limited extent in order to complete the project on time and within budget., • Ensures that the project, from original authorization through studies and reports, design, construction and post-construction, meets all requirements of the client and approving agencies and standards of quality of the firm., • Ensures that all services provided are accurate and appropriate and that charges against projects are reasonable., • Maintain adequate records, memos of conversations, and similar documentation in the file., • Take necessary administrative action in coordination with the Partner in Charge to assure proper invoicing for services performed., • Participate in Evaluation or team members., • Maintain neat and organized work area, which allows efficient access to information required by other team members., • Continue learning process by attending seminars and continuing education opportunities., • College degree in mechanical, electrical, or architectural engineering with an emphasis in HVAC, building electrical, or plumbing, or fire protection with a minimum of 5 years of experience or a minimum of 10 years qualified experience without a degree. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. This job description may be revised upon development of other duties and changes in responsibilities.

Job Description Electromechanical Designer (Junior to Senior Level) I-Pulse Albuquerque LLC We are seeking innovative electromechanical designers passionate about commercial pulsed power or high-temperature applications. Candidates should have expertise in mechanical, electromechanical, high-temperature packaging, electrical, and pulsed-power design, along with proficiency in 3D CAD design and prototyping. Who We Are: I-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth. I-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications. Responsibilities Include: • Collaborating with scientists, engineers, and technicians to design prototype hardware from concepts and mechanical designs., • Using CAD tools to create 3D drawings for prototypes, laboratory hardware, and test assemblies., • Designing high-temperature packaging for durable, long-lifetime components., • Developing PCBs and advanced high-temperature, high-reliability electronic packaging., • Presenting work at design reviews, managing schedules, and tracking project costs., • Bachelor’s degree in electromechanical design or a related field (other degrees or relevant experience considered)., • 5–10+ years of experience in pulsed-power projects, mechanical engineering, or high-temperature packaging., • 15–20 years of experience in pulsed power, power electronics, or electromechanical design for government or industry projects., • Expertise in prototype or commercial hardware design. I-Pulse Albuquerque, LLC is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, disability, or protected Veteran status. We offer competitive salaries and comprehensive benefits, including medical, dental, vision, 401(k), and PTO. Company DescriptionI-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth. I-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications.I-Pulse Inc. is dedicated to empowering humanity through revolutionary pulsed-power solutions that address critical challenges. Our technology drives transformative, sustainable applications in energy-intensive industries such as mining, geothermal drilling, and other advanced fields, aiming to reduce global industrial power consumption. Our vision is to lead technological advancements that enhance everyday life and promote sustainable growth.\nI-Pulse Albuquerque is investing in R&D to pioneer new technologies and establish industry benchmarks in pulsed-power and electrical systems. By opening an office in Albuquerque, we are advancing our commitment to commercializing pulsed power. We seek creative individuals who can rapidly transform concepts into hardware and integrate them into commercial applications.

Job Description THE COMPANY Our client is a rapidly expanding building automation and energy systems company focused on designing, implementing, and optimizing intelligent control solutions for commercial facilities. Their expertise helps buildings operate more efficiently by integrating HVAC systems, sensors, and advanced automation into centralized platforms that improve performance, energy usage, and operational visibility. The organization combines deep technical expertise with practical field execution, offering comprehensive, end-to-end services including system design, installation, programming, and commissioning of building automation systems. Their team partners with commercial and institutional clients to modernize infrastructure and develop smarter, more efficient environments. As part of their continued growth, the company is expanding its project delivery team in Albuquerque. THE JOB The Project Manager – Building Automation Systems (BAS) is responsible for managing automation and controls projects from initial kickoff through final completion. This role involves coordinating engineers, field technicians, vendors, and clients to ensure projects are delivered on time, within scope, and within budget. The position requires a professional who is comfortable overseeing both the technical and operational aspects of BAS projects, including planning, field coordination, client communication, and financial oversight. This individual will serve as the primary point of contact for clients throughout the project lifecycle and will play a critical role in delivering high-quality results while fostering strong customer relationships. RESPONSIBILITIES • Manage BAS projects from kickoff to closeout, • Develop and oversee project schedules, budgets, and deliverables, • Coordinate engineering teams, field personnel, vendors, and subcontractors, • Review control drawings, submittals, and sequences of operation, • Lead meetings with clients and internal stakeholders, • Monitor installation progress to ensure quality and adherence to design specifications, • Manage project documentation, change orders, and scope adjustments, • Track financial performance including costs, billing, and profitability, • Ensure compliance with safety standards and regulatory requirements, • Provide regular project updates and maintain strong client relationships THE QUALIFICATIONS The ideal candidate will have experience managing building automation or controls-related projects within commercial environments. Required: • 3–7 years of project management experience in building automation systems, HVAC controls, or low-voltage systems, • Experience coordinating engineering teams, field technicians, and subcontractors, • Familiarity with BAS platforms such as Niagara, Tridium, Honeywell, Johnson Controls, Distech, or similar, • Strong project scheduling, budgeting, and coordination skills, • Ability to manage multiple projects simultaneously, • Excellent communication and client-facing skills Preferred: • Bachelor’s degree in Construction Management, Mechanical Engineering, Electrical Engineering, or a related technical field, • Experience using project management tools such as Procore, Smartsheet, or similar, • Background in HVAC automation or controls integration environments THE BENEFITS • Base salary: $75,000 – $90,000, • Project-based performance incentives, • Medical and dental benefits, • Profit-sharing program, • Opportunities for advancement within a fast-growing organization, • Exposure to advanced building automation technologies

ANSYS Fluent / STAR-CCM+, Siemens Opcenter, SAP S/4HANA) - Design multi-step tasks grounded in your real workflows that require navigating multiple apps, files, and stakeholders in a way that meaningfully challenges frontier AI agents - Collaborate with other automotive engineering experts in your f