Trabajos repair en Milwaukee, Wisconsin - Page 2Crear alertas

Job Description About the Role: The Marine Technician plays a critical role in ensuring the optimal performance, safety, and reliability of marine vessels through expert maintenance and repair of mechanical and electronic systems. This position involves diagnosing, troubleshooting, and resolving issues related to engines, fuel systems, transmission lines, and hydraulic components to maintain vessel operability. The Marine Technician will work closely with engineering teams and vessel operators to implement corrosion control measures and maintain compliance with safety and environmental standards. This role demands a proactive approach to preventive maintenance and the ability to adapt to evolving marine technologies. Ultimately, the Marine Technician contributes to the seamless operation of marine vessels, supporting both commercial and recreational maritime activities across the United States. Minimum Qualifications: • High school diploma or equivalent with vocational training in marine technology or a related field., • Proven experience in engine maintenance, particularly with diesel engines and fuel systems., • Strong knowledge of transmission lines, hydraulic systems, and electronic controls relevant to marine vessels., • Ability to safely operate hand tools and diagnostic equipment used in marine repair and maintenance., • Certification from a recognized marine technician program or association., • Experience working on a variety of vessel types including commercial and recreational boats., • Advanced training in electronic control systems and pump maintenance., • Knowledge of environmental compliance standards specific to the maritime industry., • Perform routine and emergency maintenance on diesel engines, fuel systems, transmission lines, and hydraulic systems to ensure vessel readiness and safety., • Diagnose mechanical and electronic control system malfunctions using specialized tools and equipment, and implement effective repairs., • Conduct inspections and apply corrosion control techniques to protect marine equipment from environmental damage., • Utilize hand tools and diagnostic instruments to disassemble, repair, and reassemble marine components with precision and care. The required skills such as engine maintenance, fuel systems, and diesel engine expertise are essential for diagnosing and repairing mechanical failures to ensure vessel functionality. Proficiency with transmission lines, hydraulic systems, and pumps allows the technician to maintain critical propulsion and control systems effectively. Mastery of hand tools and electronic controls is necessary for precise adjustments and troubleshooting of complex marine equipment. Corrosion control skills are applied daily to protect vessels from the harsh marine environment, extending equipment lifespan and maintaining safety standards. Preferred skills like advanced electronic controls and environmental compliance knowledge enhance the technician’s ability to work with modern marine technologies and adhere to regulatory requirements, ensuring comprehensive maintenance and operational excellence.

Job Description Would you be interested in working for not only an industry leader in electronic manufacturing but working with a great team of people in an awesome location. Under the direction of the Plant Manager, the Process Engineer leads the day to day activities related to the production and quality of products, adherence to established processes for extrusion operations of a global leader in electronic technology manufacturing. Excellent salary, bonus, vacation, long term benefits for the qualified candidate. ESSENTIAL JOB REQUIREMENTS & DUTIES: § Oversees the mold setup process in extrusion. § Oversees tool work including repairs and pm work § Works with new tool IQ, OQ, PQ process, DOE runs and process studies § Plans, organizes and directs tool repair/pm and changeover operations to minimize downtime and optimize product quality. § Initiates plans to improve cycle, or repair tooling damage. § Supports production and product standards that will exceed customers’ expectations. § Implements manufacturing strategies and action plans to ensure that the facility supports strategic initiatives. § Establishes group and individual accountabilities throughout assigned departments for problem solving and cost reduction, both on a permanent and ad-hoc basis, depending on need. § Encourages use of new techniques and focuses on fact based problem solving. § Manages spending against budget. § Works to establish management practices throughout assigned areas which includes all employees’ positive involvement with opportunity for constructive input and action § Continually improves safety record by addressing both physical safety issues and employee safety attitudes while ensuring compliance of all safety procedures. § Maintains individual skills keeping up to date with latest process technologies and molding platforms. § Ensures planned KPI’s of efficiency and performance are met or exceeded. § Implements and drives continuous improvement activities through implementation of change management process and best practices. § Works with managers to implement the company's policies and goals. § Ensures coaching and development of resources to meet business’s objectives. § Manages the adherence to prescribed procedures to ensure first pass quality meets or exceeds planned goals. § Drafts timescale for the jobs/presses. § Ensures prescribed line PM’s are completed timely. § Tracks competencies of subordinates and provides leadership and development as required to achieve the objectives. § Prepares and executes short and long term department goals to meet plant goals and quantifies those results. § Prepares and justifies department budget recommendations and capital expenditures for support systems and equipment. § Ensures work is completed correctly and on time by prioritizing as necessary, assigning work, and setting work schedules. § Adheres to plant and corporate safety policies. § May assist in other areas or perform other duties as required by fluctuating business needs. KNOWLEDGE/SKILLS/EXPERIENCE: § Professional with at least 2 years’ experience in extrusion processes § Possesses well-developed managerial, communication, organizational and interpersonal skills. § Demonstrates organizational skills, is very detail oriented, and can effectively prioritize time. § Motivates team to work together in the most efficient manner by managing the process of innovative change effectively as well as mitigating team conflict and communication problems. § Ability to work in a high paced and multi-task environment. § Responsibilities include but are not limited to the following: interviewing, hiring, training, directing, coaching, rewarding and disciplining, developing an ongoing performance plan and appraising the performance of all direct reports. § Addresses employee inquiries, complaints and resolves problems by using appropriate resources/other departments to achieve results/answers. § Sets / communicates clear expectations and holds personnel accountable for attaining those standards. § Consistently demonstrates the Leadership Initiatives – Understands the Business and is always looking for ways to improve, Listens to Employees, Engages Employees and gains their commitment, Attracts and develops the right people, and Delivers results. § Demonstrates PC Skills, i.e. MS Project, Outlook, MS Office, etc. § Understands and practices Lean / 6 Sigma principles Manufacturing Engineer, Process Engineer

Job DescriptionCompany Description TOMRA Food designs and manufactures sensor-based sorting machines and integrated post-harvest solutions for the food industry, using the world's most advanced grading, sorting, peeling and analytical technology. The company's mission is to enable its customers to improve returns, gain operational efficiencies, and ensure a safe food supply via smart, useable technologies. TOMRA Food is a member of the TOMRA Group founded in 1972 that began with the design, manufacture, and sale of reverse vending machines (RVMs) for automated collection of used beverage containers. Today TOMRA provides technology-led solutions that enable the circular economy with advanced collection and sorting systems that optimize resource recovery and minimize waste in the food, recycling, and mining industries. This role is within the TOMRA Food division. At TOMRA, we want people to innovate, exhibit passion in their work and be responsible. We encourage the freedom to innovate and take risks that result in breakthroughs that challenge the status quo. We thrive off passion that always focuses and commits to meeting success. We demand a responsible and safe mindset that takes care of our customers, products and fellow employees. Job Description The Field Service Engineer is responsible for delivering exceptional technical support, maintenance, installation, and customer training services for TOMRA's cutting-edge food sorting equipment. This role aims to ensure the seamless operation of TOMRA's solutions, maximize equipment performance and enhance customer satisfaction. Primary Job Functions • Perform field service work at customer sites which includes installation, commissioning, testing, integration, optimization, maintenance and repair, ensuring full functionality according to machine specifications., • Perform all mechanical, electrical, electronic and optical tuning and setup., • Analyze, evaluate and diagnose equipment; troubleshooting machine problems through to resolution., • Perform preventative maintenance including preseason service, postseason service and enhancing ongoing performance of machines., • React in a prompt and professional manner to customer machine issues in the field. Where an easy fix is not possible, ensure customer is well informed of the next steps and potential costs., • Address customer complaints and if necessary, escalate to appropriate stakeholders., • Maintain close relationships and work collaboratively with engineering, research & development, sales, customer solution delivery and other internal stakeholders for continuous improvement activities, to advise on any potential sales opportunities and to successfully complete projects. Contribution and collaboration is vital whether its research and development site testing, refurbishment, refitting, upgrades or new installs, all projects require teamwork., • Act as the voice of the customer in the value chain to improve products systems and services, by reporting on feedback and comments received in the field leadership, research and development, or sales., • Assist with training and development of new Field Service Engineers, as requested., • Instruct and train customers on operation of machine, utilization and required maintenance of the systems., • Manage and control tools, test equipment, technical documentation and other assigned equipment., • Embrace related assignments and responsibilities as required to contribute to the overall success of the team., • Promote a “Safety First” culture throughout the company, our customers, and our industry.Qualifications, • An Associate's degree in electrical, electronic, automation, mechanical, mechatronics, sustainable manufacturing, or industrial engineering is preferred or combination education and equivalent experience is accepted., • Relevant knowledge of electronics/electrical assembly and wiring., • Strong understanding / knowledge of electronics and electrical assembly and wiring., • Proven to read, analyze and interpret technical procedures and/or governmental regulations., • Assist and support customers in a professional manner, • Ability to establish and maintain effective working relationships with customers, internal and external associates and management, • Excellent communication skills and the ability to deal effectively with customers in the English language as necessary., • Competent with Microsoft Office – Word, Excel and Outlook, • Two plus years’ experience in field service and customer support., • Two plus years’ experience in PC building, repairing and diagnostic testing., • Two plus years’ experience in installing software on PC’s., • Experience with packaging and or printing machinery a plus, • Experience engaging with customers in a service delivery environment, • Experience in electronic system troubleshooting a plus., • Working knowledge of basic analog and digital circuits, electrical power circuits, PLC circuits., • Working knowledge of basic test equipment such as oscilloscopes and voltmeters., • Knowledge of computer hardware and configurations., • Ability to work in Food processing plants, farms, cold storage facilities, and outside in high/low temperatures., • Willing to travel for at least 70% of the time, domestic and internation travel based on a flexible schedule; includes weekends and/or holiday travels., • Ability to drive without restrictions in residency country. Additional Information Pay Band For U.S. applicants, in accordance with applicable disclosure requirements, the anticipated hourly base pay range for this position is $26.00 to $35.00 per hour. The actual salary offer will carefully consider a wide range of factors, including your skills, qualifications, experience and location. Why work for us: Be part of a mission to transform how we all obtain, use and reuse the planet’s resources to enable a world without waste. We love innovation, a collaborative environment where idea sharing and thinking outside the box is encouraged. What we offer: • Comprehensive medical, dental, and vision plans with 100% employee premium coverage, • 31 days of PTO annually (vacation, sick, and holidays), increasing with tenure, • 401(k) with 100% match on the first 4% of your contributions, • 8 weeks of fully paid parental leave for eligible employees, • Up to 4 days of paid bereavement leave to support employees during personal loss, • Employee Assistance Program supporting mental, emotional, and financial well-being, • Inclusive culture that values diversity, well-being, and teamwork TOMRA is proud to be an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants regardless of race, color, religion, gender, gender identity, age, national origin, disability, parental or pregnancy status, marriage and civil partnership, sexual orientation, veteran status, or any other characteristic protected by law. Reasonable accommodations will be made to meet the requirements of the Americans with Disabilities Act and will be provided as requested by candidates taking part in all aspects of the selection process. All your information will be kept confidential according to EEO guidelines.

Job Description Bosch Building Technologies – Technician II Security About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: This Technician II Security position will provide efficient and high-quality installations related to integrated security systems. Responsibilities include, but are not limited to performing startup, installation, closeout and service of jobs; assisting in design and other tasks as assigned Responsibilities: • Installs, terminates and tests equipment as per specifications and in conjunction with any pertaining building and or electrical codes., • Responsible for training apprentices on Company procedures, systems, and installation techniques., • Work with Field Engineers on startup to ensure complete system compliance., • Daily communications with Installation Supervisor on delays, requirements, and general status of jobs to ensure delivery of the project, • Work with Installation Supervisor to ensure complete closeout and turnover of jobs to the client and service department, • Repair, restore and test all systems per specifications and in conjunction with any pertaining building and or electrical codes., • Accurate written record keeping, submitted on time and complete,, • Maintain professional licensing as required by State and Local jurisdictions, • Support, lead, and mentor team members, • Design systems and layout, • Maintain a high level of safety and professionalism, • Lead projects at a site level, manage a team of junior technicians as necessary, • Valid drivers license with acceptable driving record., • Ability to pass pre-employment screening, • Minimum 2 years working in the electronic field with daily use of AC/DC theory, • Ability to read blue prints and schematics as evidenced by 1 year of experience, • Basic computer skills including MS Office Suite as evidenced by 1 year of experience, • Associates degree (2 year) in a technical capacity is desirable, • Industry Experience: Healthcare, Education, Manufacturing, Utilities, Financial & Hospitality., • Video Surveillance: Avigilon, Genetec, Milestone, Bosch, Axis, Hanwha, Exacq., • Access Control: Lenel, Software House, Avigilon, Genetec, Identiv, Honeywell, Open Path, RS2, S2, AMAG, Gallagher, Open Options., • Intrusion: DMP, DSC, Honeywell, Bosch., • Locking Hardware: Maglocks, Strikes, Mortise, Cylindrical, ADA applications., • Data Terminations, • Experience with programing, testing and training end users on various security systems., • Out of town travel work if required. Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • While performing the duties of this job, the employee will be exposed to outdoor weather conditions, work on job sites, may be required to travel to and from job site locations, may work in a typical office environment, and is occasionally exposed to construction equipment. The noise level in the work environment is usually moderate. Confined space entry may be required. High work may be required. Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements:, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job DescriptionAs a Territory Outside Sales Representative, you will be responsible for managing and growing sales across Wisconsin and Iowa. This role combines new business development and account management (approximately 50/50) and offers strong growth opportunities as our client continues to expand its U.S. footprint. You will sell agricultural repair and replacement parts to dealerships, repair shops, and OEM suppliers. This position reports directly to the U.S. Country Manager. COMPENSATION & BENEFITS * $70,000 - $90,000 base salary * OTE $$80,000+ in year one * Top performers earn $100,000+ annually * Quarterly and monthly performance-based bonuses * Mileage reimbursement/car allowance * iPad and cell phone plan reimbursement * Employer-subsidized health benefits (start immediately) * 401(k) plan * Ongoing product and sales training (U.S. and Germany) * Opportunities to attend international trade shows, including the companys private event in Germany THE COMPANY & CULTURE Our client is a family-owned European leader in agricultural parts distribution, offering over 13 million products online and often referred to as the Amazon of agricultural parts. They entered the U.S. market three years ago by acquiring CFC Distributors in Indiana, establishing a U.S. warehouse in Rowan, Indiana. With strong backing from their German headquarters, the company has achieved steady year-over-year growth, even in challenging markets. Globally, they employ approximately 4,000 people, including 34 in the U.S. (sales, inside sales, logistics, and administration). The culture is entrepreneurial, growth-focused, and team-oriented, valuing energy, motivation, and initiative. OFFICE LOCATION & SALES TERRITORY * U.S. Headquarters: Rowan, Indiana * Territory: Wisconsin and Iowa * Travel: 4 days per week on the road; Fridays are home office/admin day * Overnight travel required EXPERIENCE, BACKGROUND & EDUCATION REQUIREMENTS * 2+ years of B2B sales experience (preferably in agricultural, industrial, construction, or automotive parts) * Experience selling to dealerships, repair shops, or OEM/industrial accounts is an asset * Strong prospecting and cold-calling experience * Mechanical aptitude and ability to learn technical product lines * Valid drivers license and clean driving record TECHNICAL SKILLS * CRM usage (training provided on internal systems) * Proficient using iPad for presentations, quoting, and CRM activities * Excellent organizational and route planning skills THE PRODUCT / SERVICE / SOLUTION * Agricultural replacement and repair parts for tractors and modern farm machinery (2000+ model years) * Parts sourced from OEM suppliers, ensuring high quality and competitive pricing * Over 13 million SKUs available online PROSPECTIVE CUSTOMERS / INDUSTRY FOCUS / DECISION MAKERS * Agricultural equipment dealers * Independent repair shops * Larger dealership groups * Decision-makers: owners, parts managers, service managers, purchasing SALES CYCLE / ORDER VALUE / ACCOUNT SIZE * Mix of smaller recurring orders and large accounts * Average account potential in the tens of thousands annually, with growth potential into six figures * Fast-paced sales cycle driven by repair/replacement urgency COMPETITIVE ADVANTAGES * Largest product range in the industry (13M SKUs) * Strong OEM supplier relationships * Combination of local U.S. warehouse support and direct shipments from Germany * Family-owned, growth-oriented, and customer-focused company * One-stop shop for agricultural parts TYPICAL DAY & DUTIES * 50% new business development (prospecting, cold calling, in-person visits) * 50% account management (renewals, upselling, relationship building) * 4 days per week in the field visiting customers, 1 day for planning/admin LEADS * Self-generated prospecting * Some existing account base from acquired distributor (CFC) * Support from marketing and inside sales teams SUPPORT & TRAINING * One-week onboarding at Indiana HQ (product, systems, CRM, and sales training) * Ride-alongs with the Country Manager and experienced sales reps (weeks 12) * Ongoing monthly product training and team meetings * Annual international sales conference in Germany WHY YOU SHOULD APPLY * Join a fast-growing European market leader entering new U.S. territories * Strong compensation structure with high-earning potential ($100K+ achievable) * Comprehensive benefits package and immediate eligibility * International exposure through training and trade shows in Germany * Opportunity to join a collaborative, family-owned organization with long-term career potential #IND11

Job DescriptionJob Title: Low Voltage Technicians Needed ASAP, OT Offered! Job Description Join our team as a Technician where you will be responsible for installing, maintaining, and repairing electrical systems in a commercial setting. You will engage in various commercial electrical projects, ensuring all installations and maintenance tasks meet industry standards. Additionally, you will assist with low voltage projects, utilize testing equipment to evaluate the performance of electrical systems, and report on performance, challenges, and successes. Responsibilities • Install, maintain, and repair electrical systems in a commercial setting., • Engage in a range of commercial electrical projects, ensuring compliance with standards., • Assist with low voltage projects., • Utilize testing equipment to evaluate electrical system performance., • 1+ year experience in a commercial electrical setting., • Proficiency in electrical testing and troubleshooting., • Experience with security systems is a plus., • Any electrical certifications are a plus. We offer a competitive hourly rate based on your experience, knowledge, and performance. Enjoy weekly pay, paid time off, and paid holidays. We provide comprehensive benefits including dental, health, and vision insurance, along with a flexible spending account. Job Type & Location This is a Contract to Hire position based out of West Allis, WI. Pay and Benefits The pay range for this position is $25.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in West Allis,WI. Application Deadline This position is anticipated to close on Mar 6, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Warehouse Lead / Equipment Mechanic We are looking for a Warehouse / Equipment Mechanic to join our team. Seeking a talented, enthusiastic, and self-motivated individual to join our family-owned business team. The ideal candidate is detail-oriented, not afraid to get dirty, and is comfortable operating & repairing typical construction equipment and tools. Warehouse Lead / Equipment Mechanic This position will be based out of our shop operations located in McFarland, WI. Responsibilities include: • Repair construction equipment in the shop and onsite as needed., • Troubleshoot, diagnose, and repair mechanical & electrical on construction equipment and fleet vehicles., • Perform routine preventative maintenance and safety inspections on equipment., • Ensure all repairs and maintenance follow OSHA, DOT, and manufacturer standards., • Test equipment to verify success of repairs., • Use basic computer skills to look up parts, schematics, and equipment manuals., • Maintain a safe and orderly working area., • Collaborate with project managers and field crews to address equipment needs quickly., • Communicate with office regarding major repairs, downtime and budget needs., • Follow all safety rules, regulations and practices in performing all work assignments., • Organize, stock and maintain warehouse., • Basic housekeeping. Requirements: • High School Diploma or equivalent, • 5+ years' mechanical experience, • Forklift certification required., • A valid driver's license and a clean driving record are required to meet company insurance standards., • Experience with diagnosing mechanical issues, • Demonstrated ability to work independently with minimal supervision while staying motivated to complete tasks efficiently, • Ability to lift, move, or carry material up to 50lbs on a consistent basis, • Proven ability to follow through on commitments and details, • Strong computer skills (proficient in Microsoft Office Suite), • Excellent written, verbal, and interpersonal communication skills, • Proven team player Benefits: • Family-valued culture, • Pay: $25.00/hour or based on experience, • Medical, Dental and Vision Insurance, Short Term Disability, • 401(k) + match, • Paid PTO #hc213217

Job DescriptionSalary: Our Company views employees as our most valuable asset, and the key to our success. We are committed to growing a diverse and inclusive culture that inspires, motivates, and continuously improves. Community involvement, employee empowerment, and strong relationships makes The Weitz Company a great place to work. The Weitz Company is seeking an Equipment Procurement Manager to be located in Port Washington, Wisconsin.The Equipment Procurement Manager is responsible for profitably managing the day-to-day equipment operations. This role will collaborate closely with application project teams and leadership to drive performance across all projects. What You'll Do: • Maintain Financials and reporting, • Prepare annual budget, • Maintain an organized and well-maintained warehouse and equipment operation, • Collaborate with applicable warehouse and project teams prior to purchasing, leasing or renting equipment, • Track equipment and tool usage to ensure regular scheduled maintenance is completed within regulations; recommend replacement, sale or repair, as necessary, • Source and solidify reputable vendors, • Pursue opportunities to provide additional services to project teams in an effort to expand warehouse operations, • Support safety programs, including: assisting with implementation, ensuring all equipment and tools are in safe working condition, establishing positive safety behavior and adhering to safety protocols, • Comply with DOT regulations (i.e. trailer weight/load restrictions, equipment maintenance), • Ensure equipment and tools are delivered timely to project sites in order to maximize productivity and in a cost-effective manner, • Maintain current asset inventory to resolve inventory irregularities, usage inaccuracies and equipment uses, • Operate small equipment to load/unload trucks, and other tasks as needed, • Ensure invoices are accurate and timely, including correct coding to project sites, • Stay abreast of new construction materials, equipment and technologies; evaluate if new techniques improve cost or productivity, • Manage staff, to include: mentoring, creating development goals, delegating tasks/responsibilities, recommending disciplinary action and recruiting of qualified talent, • Perform other duties as assigned What We're Looking For: • Education:An industry related bachelor's degree is preferred. An equivalent combination of education and experience may be considered. Forklift Certification is required, or the willingness to obtain upon hire., • Experience: A minimum of seven (7) years of construction-related experience is preferred, including management of quality assurance processes and leading change within a warehouse. Lean Principles experience is desirable. OSHA 30 preferred, or the willingness to obtain upon hire., • Technology:Proficiency in basic computer software programs such as Microsoft Word, PowerPoint, Excel, and Outlook. Employee should have the ability to learn other specific software (JDE, Procore, Bluebeam, warehouse software, etc.)., • Skills: A qualified candidate will demonstrate analytical, team leadership and organizational skills. They should also show strong independent judgment, verbal and written communication, project management, negotiation and relationship building abilities. What We Offer: • Competitive Pay, • Rewarding Bonus Program, • Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings, • Employer-Paid Short and Long Term Disability Programs, • Employer-Paid Life Insurance, • Generous Paid Time Off Provisions, • 401K Retirement Savings Plan With Company Match, • Tuition Reimbursement, • Fully Paid Parental Leave, • Voluntary Products including Critical Illness Insurance and Accident Insurance, • Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment (minorities, females, veterans, individuals with disabilities, sexual orientation, gender identity, or other protected categories in accordance with state and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable. Click hereto review our Privacy Notice. #LI-KR1

Job Description We are seeking a WELDERS And FITTERS to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workloadCompany DescriptionWell Run Growing Company with excellent employees and steady work volume. 20+ Year Contractor with Great Reputation!Well Run Growing Company with excellent employees and steady work volume. 20+ Year Contractor with Great Reputation!

Job Description Are you a self‑motivated problem-solver with strong investigative instincts and a solid understanding of the insurance claims process? Rural Mutual Insurance Company is seeking a detail-oriented Desk Property Adjuster to join our growing team. In this role, you’ll handle residential, commercial, and farm property claims, using your analytical skills and sound judgment to evaluate coverage, determine liability, and guide policyholders through the claims experience. As a Desk Property Adjuster, you will review claim information, gather necessary documentation, and make fair, timely claim decisions—all while delivering exceptional customer service. This is an excellent opportunity for an adjuster who enjoys investigative work, continuous learning, and meaningful interactions with customers in a supportive, mission-driven environment. This is a remote position; however, candidates must reside in Wisconsin. If you're a property claims professional looking to leverage your communication and critical-thinking skills with a company that puts people first, we encourage you to apply! Compensation: $65,000 - $80,000 yearly Responsibilities: • Evaluate first-party property claims remotely using digital documentation from independent adjusters and other sources., • Review policies, claim forms, and loss details to determine coverage and calculate accurate settlements., • Document findings, estimate repair costs, and maintain thorough records throughout the claims process., • Communicate professionally with policyholders, agents, and stakeholders via phone and email, addressing inquiries and guiding them through the claims process., • Negotiate fair settlements with policyholders, contractors, and third parties, clearly explaining coverage and deductibles., • Collaborate with internal teams to ensure accurate claim assessments and policy compliance., • Stay current on property insurance laws, regulations, and industry standards to ensure procedural compliance., • Perform additional duties as assigned.Qualifications:, • Minimum of three years of experience as a Property Adjuster, in either a desk- or field-based role., • Bachelor's degree in a relevant field, such as insurance, risk management, or construction, or equivalent work experience, may be considered., • Familiarity with property insurance policies, claim investigation techniques, and industry-standard software for documenting and estimating., • Solid understanding of construction principles, building materials, and the ability to read and write estimates using Xactimate., • Strong analytical and problem-solving abilities to assess property damage accurately, evaluate coverage, and negotiate settlements effectively., • Excellent verbal and written communication skills to interact with policyholders, claimants, and internal stakeholders. Ability to explain complex concepts in a clear and concise manner., • Strong customer service skills with a focus on providing a positive experience to policyholders throughout the claims process. Ability to handle challenging conversations and demonstrate empathy when dealing with individuals who have experienced property damage., • Exceptional organizational and time management skills to handle multiple claims simultaneously, meet deadlines, and maintain accurate documentation. Preferred Qualifications: • Proficient in Xactimate and XactAnalysis., • Experience reviewing independent adjuster reports., • Experience with multi-line claims adjusting., • Familiarity in handling recovery processes, including subrogation, contribution, and salvage.About Company What You'll Love About Rural Mutual Insurance: We are a leading property and casualty insurance company based in Wisconsin, well known for our financial strength and longevity in the insurance industry. Our reputation in the marketplace ensures stability and opens up numerous growth opportunities for our employees. We created a welcoming place to work with friendly and professional leadership. We are known for the great care we take with our staff, our agents, and our customers. We are passionate and determined about delivering the best customer service, preserving insurance industry knowledge, and making a difference through the work that we do. We believe in a healthy work/life balance and, to that end, offer a competitive and comprehensive compensation package including health, dental, life, LTD, and vision insurance as well as an employee bonus plan, matching 401(k) plan, and generous time off benefits.

Job Description Responsibilities • Identify and resolve parts required for repair; review repair orders, work order, and Body Shop Managers estimate notes; follow warranty guidelines; notify supervisor of any repair add-ons., • Adjust, replace, and repair all series of truck and trailer equipment (e.g., sheet metal repairs, fiberglass/ panel repairs, fabrication and structural welding, installation and alignment of truck cab body components, electrical and mechanical repairs, etc.)., • Road test vehicles when necessary to ensure quality repair., • Maintain current knowledge of job and technical skills including truck manufacturer’s repair process., • Perform work as outlined on repair estimates with efficiency and accuracy in accordance with dealership and factory standards., • Teardown and inspect for additional or hidden repairs., • Advise body shop estimator of additional damage or supplemental needs or if repairs will not be completed on time., • Lead work of any apprentice technicians and maintain ASE certifications.Qualifications, • Welding, suspension, framework experience a plus OR willing to learn/train, • ASE Certifications; Damage Analysis and Estimating, Mechanical and Electrical Components, Non-Structural Analysis and Damage Repair and State Vehicle Inspector (preferred), • Certifications listed above or equivalent experience and eagerness to improve, • Valid driver's license and clean driving recordWe are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionA day in the field You start your day on a production line, watching machines cycle to pinpoint root causes before they become downtime events. You isolate faults, dismantle equipment to access defective components, examine wear patterns, adjust controls and functional mechanisms, and repair or replace parts. You verify performance with electrical and mechanical tests, then recondition and repair machine tools to bring assets back to spec. Partner with customers • Guide customer counterparts on maintenance optimization, reliability strategies, and preventive programs., • Adhere to customer contractor codes of conduct, housekeeping standards, and safety processes at all times.Build and improve equipment, • Identify and source parts, supplies, and repair items; evaluate alternative options to improve cost and reliability., • Compile retrofit/upgrade/alternative-function packages and implement them., • Independently execute maintenance to industry standards and author maintenance standards and instructions for modified or new manufacturing equipment.Machining and fabrication, • Set up and operate lathes, drill presses, grinders, and other metalworking tools to fabricate and repair parts., • Perform welding tasks when required.Controls and data, • Alter, troubleshoot, and analyze complex control systems to resolve deep software, hardware, and configuration issues., • Leverage advanced maintenance technologies to collect performance data, identify trends, and recommend actions.Document and train, • Record work in service reports and enterprise systems, and provide clear written explanations of observations and equipment performance data., • Compile technical manuals and develop operating and maintenance procedures for equipment upgrades and automation integrations., • Support junior technicians, provide leadership on project teams, conduct on-the-job training, and lead technical programs for the development of customers and coworkers.What you bring, • High school diploma or GED., • Associate degree (technical focus) with 12+ years of related industry experience, or 15+ years of direct industry experience., • Broad knowledge of electrical, mechanical, fluid power, and control systems; able to analyze problems, synthesize options, and execute repairs., • Proficiency with basic and specialized hand tools and appropriate programming software., • Extensive travel required (local, national, and international).Preferred experience, • Condition-based maintenance, precision mechanical alignments, process equipment maintenance, and automation integration., • Strong background in PLCs, field device troubleshooting, electrical drive and motor systems, and motion control devices.Core competencies, • Communications, • Customer Focus, • Personal Discipline, • Regularly stand, walk, use hands/fingers, reach, climb (ladders or lifts), balance, stoop, kneel, crouch, or crawl in confined spaces; communicate clearly., • Occasionally sit., • Occasionally lift and move items over 50 pounds., • Regular need for close and color vision., • Occasional exposure to outdoor weather and risk of electrical shock., • Work is typically on loud factory floors, with possible exposure to hazardous materials and greasy or slippery surfaces.Technical proficiencies, • Mechanical troubleshooting, • 120/208/240/480 VAC systems, • Electrical troubleshooting and repair, • High-voltage systems, • Industrial electrical systems, • Machine safety inspections

Job Description For over 85 years, Airoldi Brothers has provided innovative truck leasing solutions to customers of all sizes-from small businesses to large fleets. We have earned several exceptional customer service awards. Every member of the Airoldi team is committed to meeting our customers' needs. We are a family-owned and operated company that strives to make you feel like part of the family too. Applicants must be reliable, willing to learn, work well under pressure, take pride in work, and communicate effectively. Why Airoldi Brothers? • Flexible work schedule, • Highly competitive wages. Any of the following can qualify an individual for higher pay: shop experience, heavy-duty truck experience, AC certification, CDL, engine certification(s), formal education, etc., • Quality and cost-effective insurance options: health, dental, vision-, life-, short- and long-term disability,, • 401k match, paid vacation, paid sick time, PTO days, paid holidays., • Ongoing OEM training., • Inspect mechanical components of vehicles to identify problems., • Overhaul and repair heavy duty engines, clutches, transmissions, differentials, and power systems, cooling systems, steering systems, hydraulic systems, or any other system used on medium and heavy-duty trucks., • Install engines, transmissions, and other components., • Perform preventative maintenance., • Submit complete technical reports and documentation as required by manufacturers in all components on all makes of trucks and trailers., • Operate transportation equipment to demonstrate function or malfunction., • Replace worn, damaged, or defective mechanical parts., • Rewire electrical or electronic systems., • Align equipment or machinery., • Repair non-engine automotive or vehicle components., • Install vehicle parts or accessories., • Troubleshoot equipment or systems operation problems., • Complies with safety and EPA regulations as well as internal controls., • Completes all work orders in a timely manner, ensuring all labor and parts are charged to the appropriate work order line and comments are entered; understands reason and task codes and signs and checks parts order form., • Tags all warranty parts with appropriate information., • High School diploma/GED equivalence, • Diesel mechanic 0-5 years' experience, • Strong diagnostic aptitude, • Valid driver's license, • CDL license or ability to obtain one, • Communication skills, • Teamwork, • Dependable and reliable attendance, • Owning your own hand tools is a plus, • Eagerness to learn, • Professionalism, • Basic computer skills Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance Final confirmation of any job offer will be contingent upon you undergoing a pre-employment drug screening. Failure to complete such screening, the falsification of a screening, or a positive finding on a screening will remove you from employment consideration for one year. Final confirmation of any job offer will also be contingent upon you undergoing and passing a pre-employment background check.

Job DescriptionThis production role is responsible for setting up, adjusting, cleaning, and operating vertical form and fill and seal packaging machines and related equipment including tooling changeovers, product quality, and output efficiency. Duties & Responsibilities: • Set up (assemble & disassemble), change over, operate, monitor, and adjust equipment on vertical form and fill and seal packaging equipment to meet all finished pouch quality specification and production requirements., • Disassemble, clean, and sanitize packaging & support equipment using designated cleaning chemicals following documented safety LOTO and cleaning procedures for product changeovers. This can include removing knives, steam cleaning jaws and fill tubes, and flushing the hopper and holding tank using cleaning chemicals. Requires use of protective equipment and works with hazardous chemicals., • Perform and document quality checks to include brix, viscosity, temperature, fill weight, production reports, compression test, drain weight, chart recorders, and metal detector. Collect necessary samples for QC and Lab testing as needed., • Complete written reports to include: process control chart, pallet tags, production reports, compression tests, drain weight, daily disposition sheet, housekeeping checklists, and labels with code date information., • Troubleshoot and/or identify equipment failures or problems. Perform minor troubleshooting, part replacement, and maintenance of packaging and related equipment to include knives, bimbas, film tracking/sensor, machine speed, code daters, pouch length, seals, Teflon tape, fitments, serrated blades, pull rollers, and tube racks., • Report any need for equipment repair or maintenance. (1st shift hours are from 6:00am-2:00pm, 3rd shift hours are from 10:00pm to 6:00am) Requirements: • High School Diploma or equivalent diploma (GED/HSED)., • Experience working in a production environment preferred. Food, beverage, or drug manufacturing preferred but not required., • Ability to lift and move 50 pounds., • Ability to work in a fast-paced environment., • Ability to apply basic mathematical concepts to the production process including conversion of weight and volume in the metric system., • Forklift experience is a plus., • Detail oriented nature and precision is critical to ensure products adhere to designated quality standards., • Must be hardworking, punctual, dependable, and work well with others. Family-owned for over 150 years, Masterson Foods has a rich history and reputation as a quality supplier of premium sweet and savory food products. We are a recognized leader in supplying these products as well as customized manufacturing solutions to the restaurant, packaged ice cream, and contract manufacturing segments of the food industry. Through a process of continuous improvement and renewal, Masterson will exceed the expectations of our customers, employees, and community. We are committed to being a good neighbor, an attractive and ethical place to work, and an attentive supplier. Masterson Foods is an equal opportunity employer. All applicants will be considered for employment without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Description Title: Service Engineer Reports to: Service Coordinator Location: DMG MORI TC Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 50% Salary Range: $83,000+ (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job DescriptionNETA Field Service Technician/Engineer-Electrical Testing/Maintenance Our client is seeking qualified professionals to increase their field service group. They understand that making a job a career is more than just day-to-day responsibilities; it’s the support you get. They offer a variety of benefits including medical, dental, and 401k. Our client is an equal opportunity employer and will consider all applications without regard to race, marital status, sex, age, religion, national origin, veteran status, disability or any other characteristic protected by law. Education & Experience: Technical school graduate and or engineering degree Minimum of 3 - 5 years experience testing and evaluating low, medium and high voltage electrical power systems Certified as a NETA or NICET technicians, or equivalent Utility, manufacturer or other technical training Job Responsibilities: Read and understand electrical one line drawings Perform all aspects of testing and maintenance of electrical power distribution systems including start up and commissioning. Inspect, Test, Maintain, Troubleshoot and Repair the following low, medium, and high voltage electrical distribution equipment: • Automatic Transfer Switches, • Circuit breakers, • Conductors, • Relays, • Starters, • Switchgears Other Required Skills: Strong computer skills: including proficiency in the Microsoft Office Suite Effective written and oral communication skills to maintain relationships with managers and clients. Willingness to travel 40-50% of the time with paid travel time, home on weekends when travel is involved Required Training: Certified NETA is preferred Strong understanding of NETA Acceptance and Maintenance Testing Specifications, NFPA70B and Industry Codes & Standards. Training in OSHA Electrical Safety and NFPA70E safety guidelines. Current knowledge of NEC, NFPA-70E, Electrical Classifications, IEEE/ANSI and other applicable design standards and guidelines.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: The Telecom Commercial Premise Technician - Level IV - required to perform detailed site surveys, installation, integration, and testing of Customer Premise fiber systems and routers with minimum supervision. Core Responsibilities: • Must have mastered installation skills and testing per Telco Standards and be able to perform all the duties of the Level IV requirements with a high degree of competence and accuracy., • Mastered comprehensive equipment installation skills on a wide variety of fiber system installations and performed system testing and integration., • Knowledge and experience with transport equipment including Ciena, Fujitsu, Cisco, Nortel, Nokia, DELL, Juniper, etc., • Deep understanding of fiber installation standards and procedures., • Ability to read and follow Method of Procedures, order specifications, floor plans, equipment, and wiring documentation., • Responsible for the accuracy of all documentation as required., • Ability to interface with customers, vendors, and other company employees in the completion of, testing of, and turning up of equipment. Turn up and Integration system testing skills required., • Elevated level of understanding of all company policies and practices, safety procedures, paperwork, and administrative requirements. Will review subordinate's time and expense documentation for accuracy and completeness., • Comply with system update requirements of all company/customer installation documents., • Ability to resolve any project related issues utilizing defined processes., • Read, understand, and apply job/equipment specifications, installation documents, schematics, and test records. Demonstrated proficiency in generating MOP's, High-risk activity reports, work schedules, test records, and project completion reports., • Physically place, remove, or modify working and non-working equipment., • Install Cable trays and/or racking from drawings and Engineering documents., • Install Telecommunications equipment in cabinets and frames, data servers, switches, routers, repeaters, bridges, gateways, multiplexers, transceivers, firewalls as required., • Identify, label, measure, terminate and physically route the cables that supply AC and/or DC power or transmit data in various technical spaces., • Conduct testing and document performance characteristics of hardware and software; determine efficiency, reliability, and compatibility with existing system., • Perform test and turn-up as well as other integration activities., • Resolve equipment and technical issues as they arise., • Perform quality validation on in-process and completed work. Core Experience: • Minimum 5+years' installation experience or combination of experience and training as determined by company management. Prior leadership experiences required. Verizon Commercial Premise Installation experience a plus!, • High school diploma with two years technical school or a combination of training and experience related to telecommunications field installations., • Ability to apply common sense understanding to conduct instructions furnished in written, oral, or diagram form. Ability to deal with problems involving variables in standardized situations., • Must have proficient laptop computer skills and experience with applications., • Ability to fully understand all company/customer policies and procedures and safety requirements., • Excellent verbal and written communication skills., • MS Office (Outlook, Word, Excel, Teams) skills. At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • Travel required in your home region utilizing a company vehicle. Must be able to work a variety of shifts and travel with overnight stays, if required. Expenses are 100% paid by the employer. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$65,000—$75,000 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job DescriptionDescription:Body Shop Technician Bring your technical skills to Kunes Auto Group and help restore vehicles to their best with a team that values craftsmanship and precision. Responsibilities • Assess vehicle damage and perform quality repairs to body panels, structural elements, and vehicle frames, following manufacturer and dealership standards.?, • Replace damaged body parts—including bumpers, fenders, hoods, and trim—and align, weld, or attach new components as needed.?, • Prep surfaces, sand, mask, and apply paint coatings using appropriate tools and techniques.?, • Perform fiberglass, aluminum, and light mechanical repairs within expertise., • Document repair work and maintain open communication with managers and team members regarding timelines, supplies, and repair progress.?, • Operate all shop tools and equipment safely; follow safety procedures and uphold high housekeeping standards., • Participate in ongoing training and stay current with repair techniques and industry regulations.Requirements:Qualifications, • High school diploma or equivalent; technical or vocational training is a plus.?, • 1-4 years of automotive body shop or collision repair experience preferred.?, • I-CAR or ASE certifications are a plus; candidates with strong practical experience will also be considered.?, • Able to safely lift, move, and position heavy vehicle parts., • Own basic hand tools; additional specialty tools welcome., • Valid driver’s license and good driving record required.Why Join Kunes?, • Work with a stable, growth-minded dealership group., • Ongoing learning and advancement opportunities.

Job Description WHO WE ARE We are a company where people matter. We are family driven. We are financially strong. And we are looking for problem-solvers to join our growing team. BENEFITS • Up to 10% Retirement Contribution, • $600 per Year Wellness Incentive, • Two Weeks Starting Paid Time Off FIELD TECHNOLOGIST The primary purpose of this position is to execute and support field service equipment activities for Hydrite Chemical's Manufactured Solutions Group. These activities include understanding a customer (or prospect) process, to be aligned to equipment installs, upgrades, preventative maintenance, as well as being a technical resource and proficient in system design, program configuration and next generation ideation. Primary responsibilities include: • Uphold Hydrite Chemical's Mission and Vision Statements through internal and customer centrism., • Quote and specify project, preventative maintenance and service requests, assigned by the Field Process Manager. This work generally includes installation, commissioning, startup support or task outside the primary responsibilities of Field Service. NOTE: Post start up support is likely as confirmation a project is complete., • Study industry trends and be engaged in understanding what our competition is focusing on, specific to practices, procedures and concepts., • Be an acting OEM and Vendor liaison., • Conduct industry appropriate training for our customers and Hydrite staff, yet not inclusive to systems, best practices or industry knowledge. A focus should be placed on layers of troubleshooting and repair., • Participate in plant surveys to identify and quantify customer, prospect and Field Service needs., • Manage own project list., • Support effective communication in all Hydrite Chemical business units, particularly where responsibilities overlap to ensure success of the Manufactured Solutions Group and those customers whom we support., • Communicate effectively and efficiently with their acting Manager and corresponding Sales Team., • Support and execute current and new customer chemical trials to achieve defined performance objectives., • Perform all duties outlined in relevant SOPs and all other duties to be assigned., • Participate in RCRA, regulatory, health & safety and process training activities as required. Review changes/additions with your supervisor. Must be RCRA compliant., • Work with other staff members to maintain workload balances. Provides back-up support as necessary., • Supports effective communication with all Hydrite departments where responsibilities overlap to ensure success of the branch team. REPORTING STRUCTURE • This position reports to the Field Technology Manager PREFERRED EXPERIENCE • Bachelor's Degree in chemical or mechanical engineering is preferred., • 3-5 years related field experience, • Skill or experience in the following areas are desired: Identifying and writing project scopes., • Specifying equipment., • Partnering on equipment implementation and installation., • Starting up of field devices., • Provide internal and customer training., • Must have communication and interpersonal skills, along with the ability to read, write, and speak English. PHYSICAL REQUIREMENTS • Position requires extensive travel and frequent overnight stays., • Driving or riding in an auto, or aircraft, from 3 to 6 hours at a time., • Standing for extended periods of 3 to 4 hours., • Frequent 12-to-16-hour workdays may be required because of travel and customer commitments., • Frequent lifting of 25 to 50 pounds., • Ability to climb ladders and stairs., • Frequent turning, twisting, stooping, bending, and reaching. JOB EXPECTATIONS: • Uphold Hydrite's Standard of Excellence through a continuous commitment to maintain quality facilities and provide quality products and services to internal and external customers., • Participate in RCRA, regulatory, health & safety and process training activities as required. Review changes/additions with your supervisor. Must be RCRA compliant., • Regular attendance is essential., • Perform all duties outlined in relevant SOPs and all other duties to be assigned., • Work with other staff members to maintain workload balances. Provide back-up support as necessary., • Support effective communication with all Hydrite departments where responsibilities overlap to ensure success of the branch team. ADDITIONAL BENEFITS Benefits and perks include 401k and profit sharing, medical/dental/vision/life insurance, paid time off, tuition reimbursement, adoption assistance, legal services insurance, scholarship awards for children of employees, summer picnic, community giving events, free family wellness coaching including nutritionist and fitness coach. WANT TO STAY CONNECTED? FIND US ON SOCIAL MEDIA • LinkedIn: linkedin.com/company/hydrite-chemical-co-, • Facebook: facebook.com/hydrite Privacy Notice for California Residents:

Job DescriptionPassionate about pizza? Are you motivated to ensure smooth operation of machinery in a food production environment? If you are you an experienced Electro-Mechanical Technician looking for a fast-paced and rewarding opportunity in the food manufacturing industry, Palermo's Pizza has an exciting position for you! As an Electro-Mechanical Technician, you will be responsible for troubleshooting and repairing a variety of electrical and mechanical systems, including conveyor belts, packaging machinery, and food processing and bakery equipment. You will work closely with our production team to minimize downtime and ensure that our equipment meets the highest standards of safety and efficiency. If you have a strong background in industrial maintenance and electro-mechanical systems plus a passion for working in a fast-paced food production environment, we want to hear from you. Join us and be part of a team that is dedicated to producing high-quality food products for consumers around the world. We offer a $7,000 sign-on bonus! Our Electro-Mechanical Tech roles range from $27.00 to $44.80 per hour plus additional pay for weekends and holidays. You will join a high performing maintenance group that regularly achieves a 98.5% equipment availability rating. Perks… • 20 free Pizzas per month, • Fantastic benefit offering starting on the 1st of the Month after Hire, • Free uniforms & reimbursement for safety shoes, prescription safety glasses and tools, • 401k & Roth with company match and fully vested on the 1st of the Month after Hire, • Paid holidays plus a floating holiday of your choice, • $7,000 sign-on bonus! Our high-tech pizza manufacturing operations include an on-site bakery to produce best-in-class crusts, robotic packaging equipment, and a 24-hour shipping and receiving facility. When you’ll work… We are currently hiring experienced Electro-Mechanical Technicians across all shifts! • 1st- 6am to 3pm, • 2nd- 2pm to 11pm, • Support our production teams by maintaining and repairing all production lines, troubleshooting and performing preventative maintenance on all machinery and equipment., • Install, repair, rebuild and maintain machinery and mechanical equipment used in production, packaging, and all other plant areas., • Be involved in all aspects of equipment from installation to rebuilding, fitting, and aligning equipment to meet quality and efficiency standards., • Demonstrate strong electrical knowledge and troubleshooting skills on controls such as, PLC’s, VFD’s, servos, robotics, and programmable devices.Why you’ll be successful…, • Proven ability to operate safely by following all food and people guidelines., • Utilizing knowledge from your 5+ years’ experience with mechanical repair, plumbing, welding, and electrical repair to facilitate seamless production functionality to deliver daily production goals., • Organized and methodical approach to problem solving – often in a time-sensitive, tight-deadline situation where accuracy is critical., • Designated lifelong learner with a strong interest in mastering new mechanical technologies. Our commitment to excellence drives everything we do, from our state-of-the-art facilities to the dedicated people who make it all happen. Join us, and you’ll be part of a team that values hard work, collaboration, and celebrating success (with plenty of pizza along the way)!

Job Description We are seeking a Welding Supervisor to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workloadCompany DescriptionOur company has a great reputation with steady work volume.Our company has a great reputation with steady work volume.

Job Description Steele Solutions, Inc. is the nation's leading designer and manufacturer of steel work platforms and mezzanines. We recently launched our automation division to solve one of the biggest challenges in material handling-controls that are too often rebuilt from scratch, full of delays, and unpredictable at startup. With this launch, we’re looking for an Automation Field Specialist professional to join our automation team in Atlanta, GA (preferred) or Milwaukee, WI! *Role does require travel 40-70%. Summary The Automation Field Specialist is a field service technician role focused on industrial automation systems, not general equipment repair. This position is responsible for on-site troubleshooting, controls and electrical diagnostics, control panel assessments, and execution support for PLC/HMI software and control hardware upgrades. The role requires stronger controls/electrical depth than a typical field service technician, including disciplined software backup/rollback practices, interpretation of electrical drawings, and safe work inside control panels. When not traveling, the Automation Field Specialist contributes billable engineering support to our Controls and/or Electrical teams—supporting controls development tasks, commissioning readiness, and/or electrical documentation updates—helping improve repeatability and reduce field risk across projects. Key Responsibilities 1. On-Site Service & Troubleshooting (Core) • Travel to customer sites to troubleshoot and resolve automation issues impacting uptime, reliability, or safety., • Diagnose faults using a disciplined approach (symptom capture → isolate → verify → corrective action → validate)., • Communicate clearly with customer stakeholders: what was found, what it means, and recommended next steps. 2. Control Panel Assessments & Safety Checks (Core) • Perform controls/electrical panel condition assessments to identify risks such as:, • overload conditions / overheating indicators, • loose terminations / damaged conductors, • grounding/bonding concerns, • device damage, poor workmanship, labeling/documentation gaps, • Use appropriate instruments where applicable (multimeter, clamp meter, network tools; thermal camera if available) and capture evidence (photos where permitted)., • Recognize and escalate “stop work” conditions immediately. 3. Field Modifications, Repairs, and Minor Install Work (Core) • Perform hands-on panel work within scope and authorization, including:, • landing/terminating wires, • replacing components/devices and correcting wiring issues, • minor panel modifications resulting from findings, • Coordinate with contract electrical installation partners when work exceeds scope, staffing, code/licensing needs, or schedule demands—while still being able to assess, direct, and validate the work. 4. Controls Software / Hardware Upgrades & Field Implementation (Core) • Execute controlled upgrades and changes such as:, • PLC/HMI software upgrades, patching, and controlled configuration changes, • backups, restore verification, version discipline, rollback planning, • minor hardware upgrades (I/O swaps, comms components, device replacements) where authorized, • Support cutovers during planned downtime; validate functionality and document “as-left” condition. 5. Preventive Maintenance & Reliability Checks (Services Offering) • Perform scheduled PM-style checks for automation systems using SSI/customer checklists:, • cabinet condition/ventilation/cleanliness observations, • wiring/termination condition checks as appropriate, • basic network and device health checks where applicable, • firmware/software version verification where applicable, • Identify and document “future failure” risks and recommend mitigation actions. 6. Documentation, Work Orders, and Closeout Discipline (Core) • Accurately complete electronic service documentation (tablet/laptop):, • work orders, service reports, parts used, time/notes, customer approvals as required, • Maintain disciplined technical artifacts:, • software backups before/after, change logs, version notes, • redlines/as-left notes where applicable (drawings, panel changes, device replacements), • Provide clean handoffs to PM/Engineering for follow-on work. 7. Off-Site Engineering Support (When Not Traveling) Billable Contribution Depending on background and strengths, support may include: • Controls support: assisting with PLC/HMI standards, minor enhancements/bug fixes, reusable routines/snippets (under engineering direction), commissioning readiness checklists and cutover runbooks, offline troubleshooting from logs/backups., • Electrical support: electrical documentation support (redlines/as-builts), panel/device change packages, drawing QA feedback driven by field findings, upgrade scoping inputs and parts lists., • Field-driven standard work: contributing to checklists, common defect libraries, and repeatable service/upgrade methods that reduce field risk and rework. 8. Customer Relations & Service Mindset (Core) • Represent SSI Automation professionally on-site: clear, calm, accountable., • Follow all customer and SSI safety rules including LOTO and applicable energized troubleshooting practices., • Correct PPE selection/use, safe approach boundaries, and instrument use discipline., • 5+ years of experience in industrial field service / controls troubleshooting / commissioning / electrical troubleshooting in automation environments (material handling preferred)., • Ability to read and interpret electrical schematics/wiring drawings and troubleshoot logically under time pressure., • Hands-on capability in panels: able to safely perform terminations and component swaps within scope and authorization., • Strong documentation habits (work orders, service notes, closeout packages)., • Comfortable working independently at customer sites with travel and flexible hours. Preferred Qualifications Controls / Platforms • Rockwell Studio 5000 / Logix, • Exposure to other platforms: Beckhoff, Siemens, etc., • HMI/SCADA exposure: FactoryTalk View, Ignition, Wonderware/AVEVA, • AutoCAD Electrical experience (helpful), • LOTO (required), • NFPA 70E training/certification (required or obtain within X days—your call), • Customer industrial sites: moving equipment, noise, elevated platforms, varying temperatures., • Must be able to carry typical field equipment (up to ~50 lbs), climb ladders/stairs, and stand/walk extended periods., • Independently runs site troubleshooting and assessments; produces clear findings and practical corrective actions., • Executes upgrades without surprises: backups, rollback plans, controlled changes, thorough closeout., • Customers trust this person’s judgment and communication., • When not traveling, consistently delivers billable contribution that strengthens Controls and/or Electrical execution and reduces field risk. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions The position works in an office environment – location Atlanta, GA (preferred)/Milwaukee WI, Remote to office TRAVEL: 40-70% Why You’ll Love Working Here? • A collaborative culture., • Opportunities to make a real impact as we grow., • Competitive pay, great benefits, and a great team.

Job Description We’re looking for an experienced **MIG Welder/Fitter **to join our manufacturing team. This role involves fabricating and assembling sheet metal components to precise engineering specifications. You’ll interpret blueprints, perform MIG welding on various metals, and ensure high-quality, visually sound weldments. **Key Responsibilities ** * Perform MIG welding on mild and stainless steel components. * Set up and adjust welding equipment based on job requirements. * Read and interpret blueprints, weld symbols, and specifications. * Conduct fitting, alignment, and layout for assemblies. * Inspect welds for size, quality, and appearance; repair as needed. * Grind, buff, or finish surfaces to meet cosmetic and structural standards. * Operate safely under Lockout/Tagout and other shop safety procedures. * Work independently or in a small team to meet production goals. **Skills and Qualifications ** * 1–2 years of MIG welding or metal fabrication experience preferred. * Strong ability to read mechanical drawings and measure accurately. * Proficient with flux core, shielded wire, and spray transfer methods. * Knowledge of torch cutting, arc gouging, and basic fitting. * Familiarity with AWS charts, steel tables, and welding symbols. * Ability to use standard tools (clamps, gauges, tape measure, etc.). * Basic math skills, including decimal-to-fraction conversion. * Effective communication and teamwork skills. * Adherence to all safety and quality requirements. **Work Environment ** * Industrial shop environment with exposure to heat, noise, and metalworking conditions. * PPE such as welding helmets, gloves, and protective clothing required. * Safety awareness and compliance are essential. **Technical Proficiency ** * MIG welding setup and operation for production. * Blueprint reading and weld inspection. * Safe use of grinders, torches, and fabrication tools. Salary info: $29 - $29 / hr

Job DescriptionWinter Services, a leader in the snow removal industry, is currently seeking a highly motivated individual to work as a full-time, year-round Fleet Mechanic in the WI area. As a Fleet Mechanic, it will be your duty to inspect and repair our company vehicles and equipment (trucks, plows, heavy equipment ETC) as well as perform preventative maintenance to ensure our inventory are running to the best of their ability and will be safe for next season operations. Duties and Responsibilities: • Maintains vehicles, which may include a company’s fleet of trucks, heavy equipment, etc., • Performs routine and preventive maintenance including oil changes and tune-ups., • Performs tests on specific parts and systems to ensure proper function., • Identifies mechanical problems., • Examines critical parts and systems using a standard checklist., • Repairs or replaces malfunctioning parts and systems such as brake pads, belts, water pumps, transmissions, and other mechanical parts., • Plans and establishes timetable to complete repairs and maintenance., • Visits job sites and other facilities to inspect vehicles., • Has a working knowledge of DOT requirements, • Test drives vehicle to confirm safe and proper operation., • Performs other related duties as assigned.Requirements:, • A valid driver's license, CDL B Preferred, • Candidates have availability to work long shifts during the snow season., • A great work ethic and attitude, • Strong problem solving and critical thinking skills., • Candidate must possess a strong background in brakes, suspension, exhaust and emissions, light fabrication, hydraulics, electrical and diagnosticsPrior knowledge of skids, loaders, tractors, etc, is a plus. ASE/Other Certifications are preferred but not mandatory. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insuranceSchedule:, • Monday to Friday YpdPKeqEDF

Job Description Automotive Mechanic Job Summary Adjusts, services and repairs automotive equipment. General Accountabilities Performs a full range of skilled automotive repair work, such as minor tune-ups, electrical system servicing, and engine overhauls. Inspects automotive equipment to determine the corrective action necessary. Repairs automotive equipment. Operates and maintains automotive shop equipment. Performs minor welding and brazing work. Keeps records and creates reports pertaining to repairs performed. *The company reserves the right to add or change duties at any time. Job Qualifications Experience: 2-3 years related experience Skills Excellent verbal and written communication Service orientation Troubleshooting Equipment maintenance Repairing Equipment selection

Job DescriptionBenefits: • 401(k) matching, • Flexible schedule, • Free uniforms, • Signing bonus Amato Collision Center is a dealer associated collision repair shop. We have DRP relationships with multiple insurance companies and attached to a growing network of locally owned, family run dealerships. SIGNING BONUS UP TO $5000 BASED ON QUALIFICATIONS AND EXPERIENCE Benefits • Medical, • Dental, • Vision, • 401K, • Competitive pay plan, • Exceptional work environment, • Paid Training, • Paid VacationQualifications, • Previous experience as a body repair technician, • I-CAR experience a plus, • Welding, suspension, framework experience a plus, • Able to work in fast-paced environment, • Good communication skills, • Good organizational skills, • Clean and valid drivers licenseSIGNING BONUS UP TO $5000 BASED ON QUALIFICATIONS AND EXPERIENCE

Job Description General Description: Under the direction of the Assembly Manager, the 1st/2nd ShiftIndustrial Millwrightwill assemble fabricated and machined components. Essential Duties and Responsibilities: This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. * Very strong mechanical ability to assemble fabricated and machined components. * Rig and load trucks using overhead cranes independently. * Ability to perform advanced small to large machinery assembly. * Full understanding of blueprint readings and schematics. * Experience repairing heavy industrial equipment preferred. * Determine proper tools and machinery required to complete the production schedule. * Complete final inspection of all parts to meet quality standards. * Complete required monthly safety training. * Support both internal and external customers. * Provide support and backup as needed. * Maintain a clean, safe, and organized work area. * Ability to weld preferred, but not required. * Help drive and support BCT’s Culture and Core Values. Qualifications: • Verbal and Written Communication skills, • Attention to Detail, Thoroughness, Problem Solving skills, the ability to make decisions and follow-through., • Requires mathematical skills that require the ability to add, subtract, multiply, and divide, and to make metric system conversions., • Overhead crane experience required., • 3+ years of relevant experience in manufacturing or similar setting required., • Experience with industrial heavy machine assembly preferred., • Heavy Equipment Repair, • Machine Building/Assembling, • Tape Measure Reading, • Maintenance and Repair Skills, • Rigging & Load Handling, • Shot Blast Machine (Viking Blast & Wash Systems, Goff, Guyson, Pangborn, Wheelabrator)

Job DescriptionDescription: Trescal is a growing company, looking for new talent to join our organization! We are the premier independent calibration, repair, and asset services provider in the U.S. We provide our customers single-source, cost-effective, best-in-class solutions. Our team is comprised of talented professionals who excel at providing industry leading calibration, repair and asset management services to our customers. As an employee at Trescal, you will join a people-centric company with an incredible culture. We encourage new ideas and suggestions in order to continue to offer both customers and employees the services and benefits in a dynamic, global marketplace. We value teamwork, integrity, quality, innovation, and dynamic engagement. Does Trescal sound like the place for you? Then join our team! We have a great opportunity for an experienced Calibration Technician to join our team in the Milwaukee, Wisconsin location. In this role you will: · Perform calibrations on medium to high level test and measurement instrumentation in the calibration laboratory, and where necessary, at customer’s locations (on-site) · Use your troubleshooting, repair, and calibration knowledge to work on unique equipment · Be responsible for customer satisfaction on all equipment and services · Create and verify calibration data sheets for technical content and accuracy based upon specifications and approved procedures Requirements: As a Calibration Technician level 2 you should possess: · Military (PMEL or TMDE) training & experience OR technical associates degree OR equivalent work experience. · Minimum of 2 years of commercial OR military calibration laboratory experience · Experienced in calibrating test and measurement equipment in the following disciplines: • Thermodynamics, • Dimensional, • Mechanical, • Torque, • Hand tools, • Surface Plates · Experience in commercial calibration. BENEFITS: We believe people are the most important part of every business, which is why we offer more benefits than a great health insurance plan. At Trescal, we have a strong track record of retaining our employees by providing challenging work experiences, learning and development opportunities, and a success oriented collaborative environment. In addition, we offer paid time off, a 401k plan, career development opportunities, referral bonuses, and a competitive benefit package. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, disability or veteran status. #INDTUS

Job Description This role is responsible for the routine and preventative maintenance and repair of four 120,000+ square foot athletics facilities buildings; mechanical equipment; and utility systems. Under general supervision, performs a wide variety of skilled and semi-skilled building maintenance and repair tasks. As a company that prides itself on service, this position is critical to providing that end user experience to members. The successful candidate for this role will aide in doing our best to ensure 99% up-time for our building systems and will consistently be challenged to find new ways to stay ahead of that curve. For those who like working with people this is a great role, as you regularly interface with members on the floor, not just stuck in a machine room. Employee Perks: • Complimentary Family Membership, • Complimentary Child Care for Staff Children, • Medical, Dental, Vision, Short & Long Term and Life Insurance, • Paid Time Off, • 401K, • Employee Financial Relief Program, • Daily Discounted Employee Meal Program, • Winter and Summer Team Member Celebrations, • 50% off club services, • Performs major and minor repair of all buildings and equipment., • Conducts periodic preventative maintenance on the mechanical, HVAC and plumbing systems. This involves lubrications, adjustment, cleaning, and periodic testing of the equipment., • Install electrical wiring and devices, and replaces and repairs wiring, and electrical components (ballasts, contactors, switches, outlets, etc) as needed, • Will aide in general maintenance and small project activities including repairs or paints doors, floors, windows and other building services, • Ability to communicate effectively with membership and staff, • Willing to work nights and weekends as needed, • Valid Illinois state driving license required, • 5 years of experience in building and mechanical or electrical equipment maintenance and repair, • 3 years of experience servicing commercial HVAC equipment, general upkeep and PM, • High School Diploma or GED n21zo7lZTi

Job Description We are currently hiring for the position of Diesel Technician. As a Diesel Technician, you will be responsible for installing, maintaining, and repairing diesel generators and their related systems. Working with a variety of generator models and sizes, you will ensure their optimal performance and reliability. Your key responsibilities as a Diesel Technician will include: • Installing and commissioning generators according to manufacturer guidelines and specifications, • Performing routine maintenance and inspections on generators, including oil and filter changes, fuel system inspections, and component testing, • Diagnosing and troubleshooting electrical and mechanical issues, identifying faulty components and implementing necessary repairs, • Replacing faulty parts and components, ensuring proper installation and adjustment, • Maintaining accurate records of all maintenance and repair activities, including completed work order forms and parts used, • Complying with safety regulations and protocols, ensuring a safe work environment at all times, • Work with diesel and natural gas engines, • 2+ years of experience with with commercial Backup Power Generators, • Experience with diesel engine repair and maintenance, • Experienced with engine and generator troubleshooting, • Strong electrical and mechanical aptitude, • Ability to diagnose and troubleshoot generator issues, • Knowledge of generator safety protocols, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Company Truck, • Uniforms, • Tool Loan Policy

Job Description Job Description: Performs calibration of Gage Blocks, Threaded Plug and Ring Gages, Cylindrical Plug & Ring Gages and other hard gages to required specifications in accordance with ANSI, Military, Federal, and Manufacturer Specifications. Also perform similar calibration on various hand tool type gages such as calipers, micrometers, indicators, torque wrenches, etc. Measurements are recorded for generation of long form certificates traceable to The N.I.S.T. Calibrations are performed in QCS climate controlled laboratory environment. Job Duties (include but not limited to): All work is performed in accordance to specific procedures that comply with various standards and specifications. Calibration data is collected by taking measurements and recording the readings in QCS custom developed applications for generation of Long Form Certificate of Calibration. Where applicable, adjustments are made to bring the gages/ instruments into tolerance. Requires knowledge of gage application and functionality and be able to determine if a gage is in or out of tolerance by performing basic math. Must be able to follow and understand the calibration procedures & techniques while possessing the appropriate analytical abilities. Qualifications · Must be capable of working effectively individually or in a team environment. · 2 year technical school degree or equivalent level of education and/or work experience in a Quality or manufacturing discipline where gages were used, or Military (PMEL) training /experience. · Must be able to follow verbal and written instruction. · Good Math Skills · Must possess initiative and self motivation. · Ability to obtain and maintain accurate records & certifications. · Strong computer skills · Ability to work with data bases and know how to properly store and retrieve data · Good Mechanical Aptitude · Good Troubleshooting skills · Must have good communication skills and a professional appearance due to interface with customers. Benefits · Health Insurance · Dental Insurance · 401K Plan · Paid Vacation · Vision Insurance · Paid Holidays Company DescriptionQCS is an ISO/IEC 17025 Accredited full service metrology lab established in 1984 that provides calibration services to the Aerospace, Automotive, Defense, Medical, Nuclear, and all other General, Manufacturing sectors. QCS calibrates Hard Gages (i.e. Gage Blocks, Cylindrical and Threaded - Plugs, Rings, & Pins, etc.), QCS also performs calibration and repair of Electro-Mechanical Gage Hand Tools (i.e. Micrometers, Calipers, Indicators, Torque, Force, Pressure, Height Gages, Mass, etc.), Electronic Test & Measurement Equipment (Oscilloscopes, Multi-meters, Frequency Counters, Signal Generators, Hypots,etc.).OCS offers on-site services for the calibration of CMM’s, Hand Tools, Surface Plates, Optical Comparators, Hardness Testers, Electronic Instrumentation, and more. In addition QCS provides 1st Article Dimensional Inspection Services utilizing our touch probe and Video CMM’s) QCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for nearly 40 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.QCS is an ISO/IEC 17025 Accredited full service metrology lab established in 1984 that provides calibration services to the Aerospace, Automotive, Defense, Medical, Nuclear, and all other General, Manufacturing sectors. QCS calibrates Hard Gages (i.e. Gage Blocks, Cylindrical and Threaded - Plugs, Rings, & Pins, etc.), QCS also performs calibration and repair of Electro-Mechanical Gage Hand Tools (i.e. Micrometers, Calipers, Indicators, Torque, Force, Pressure, Height Gages, Mass, etc.), Electronic Test & Measurement Equipment (Oscilloscopes, Multi-meters, Frequency Counters, Signal Generators, Hypots,etc.).OCS offers on-site services for the calibration of CMM’s, Hand Tools, Surface Plates, Optical Comparators, Hardness Testers, Electronic Instrumentation, and more. In addition QCS provides 1st Article Dimensional Inspection Services utilizing our touch probe and Video CMM’s)\r\n\r\n\r\n\r\nQCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for nearly 40 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.

Job DescriptionShape the machinery behind life’s essentials At Greif, we package what matters. Operating in 40 countries, we deliver reliable, innovative solutions across Customized Polymer, Sustainable Fiber, Durable Metal, and Integrated Solutions. Explore more at and follow us on Instagram and LinkedIn. Day-in-the-life Your evening begins as the plant winds down—and our third shift gears up. You review the maintenance plan, gather the right tools and parts, and head to the line for a quick visual inspection. You’ll: • Perform scheduled preventive maintenance, from lubrication and cleaning to tightening and aligning components., • Check fluids, replace worn parts, and calibrate sensors and gauges to keep performance on spec., • Run diagnostic tests to assess machine health, then investigate symptoms with diagnostic tools to pinpoint root causes., • Plan minor to moderate repairs—identifying materials, replacement parts, and specialty tools needed., • Document all work: parts used, procedures performed, and observations for follow-up., • Offer recommendations for future adjustments or repairs to boost reliability., • Support equipment projects, including installation, modification, and relocation of machinery., • Follow technical documentation such as manuals, schematics, blueprints, and P&IDs to execute tasks precisely., • Maintain your own tools and shop equipment, keeping everything in safe, working order., • Help manage common-stock supplies—inventorying, placing orders, receiving, and verifying materials., • Collaborate across the team—taking guidance from senior mechanics and assisting junior teammates with routine questions., • Complete all paperwork tied to your work: work orders, parts requests, PM and runtime inspections, downtime and RCA reports., • Adhere to company safety procedures and operational standards at every step. Schedule, • Third Shift: 10:30pm – 6:30am, • Must be able to train on first shift. What you bring, • High school diploma (or equivalent) and 2–4 years of relevant experience., • Hands-on ability with hand, power, and diagnostic tools., • Working knowledge of automated industrial machinery and electrical, hydraulic, and pneumatic systems., • Ability to interpret mechanical/electrical drawings and work orders., • Strong troubleshooting, communication, and problem-solving skills., • Comfort juggling multiple priorities in a fast-paced environment., • Capable of disassembling, repairing, and reassembling manufacturing equipment., • Clear written and verbal communication; able to work effectively with limited supervision., • Proficiency in Microsoft Office and other relevant software. Proficiencies, • Mechanical troubleshooting, • Hydraulic systems, • Pneumatic diagnostics, • Maintenance and repair #LI-NG1

Job Description BUILDING ENGINEER I JOB SUMMARY: The Building Engineer I apply trade skills to perform preventive maintenance and corrective repair of building systems for the safe, efficient and proper operation of the assigned property. The individual in this role must be capable of completing all tasks as directed by the Chief Engineer, Assistant Chief Engineer or property management staff with some supervision, taking ownership when assigned team projects and accepting responsibility for actions and results. DUTIES AND RESPONSIBILITIES: • Complies with all applicable codes, regulations and governmental agency and Company directives related to building operations and work safety., • Works in a constant state of alertness and safe manner., • Competent in all shift operations, satisfying work orders and/or providing some technical and procedural assistance for coworkers., • Electrical: Possesses a working knowledge of electrical systems, circuits and electrical safety procedures. Knowledgeable in troubleshooting, short circuits, grounding issues, etc. of single- or three-phase AC circuits. Competent in the replacement of outlets, switches, lighting ballasts, circuit breakers, motor control starters, motors, etc. Assists with the preventive maintenance program for all electrical equipment., • HVAC: Possesses a working knowledge of heating, ventilating and air conditioning (HVAC) systems and Central Plant operations to include troubleshooting of same. Assists with preventive maintenance for all building mechanical equipment such as air handlers, pumps, variable air volume units, etc. Knowledgeable in building automation systems (BAS). Responds to HVAC calls. Knowledgeable in chemical treatment. Performs inspections on chillers; adjusts and records findings. Replaces belts, motors, bearings, actuators and valves on all mechanical equipment. Knowledgeable in pneumatic or direct digital control (DDC) controllers and actuators for proper operation., • Life Safety: Proficient in the property’s life safety systems and all life safety recordkeeping. Identifies and responds to fire alarms and trouble calls; properly enables or disables points. Conducts inspections of emergency generator and fire pumps; records results. Makes recommendations for outside service as appropriate., • Miscellaneous: Maintains a basic understanding of mechanical drawings and wiring diagrams., • Repairs or replaces door closures, hardware and operators. Adjusts or repairs security systems., • Maintains adequate supplies and tools and orders materials necessary to complete all tasks., • Arranges for subcontractors when required., • Updates job knowledge at an appropriate level by participating in educational opportunities, reading professional publications, growing personal networks and possibly participating in professional organizations., • Performs and/or oversees the day-to-day efficient operation, maintenance and repair of all building and site systems for assigned properties. Building systems include but are not limited to HVAC, electrical, lighting, plumbing, energy management, water treatment, hardware, keying and fire protection., • Assist in the monitoring of contractors, inspecting work and generating deficiency lists., • Accurately complete tenant requests, repair work and related records for the respective site/buildings as required. Follow applicable government / local authority requirements and other records for assigned properties., • Available for various shifts, to fill in for other staff, and to work extended hours, nights, weekends and holidays to ensure adequate building coverage and perform necessary repairs as needed. Respond to afterhours emergencies such as fire, flooding, severe weather (including but not limited to snow and ice removal) power outage and other related situations including clean-up activities per on-call procedures or as requested in critical situations., • Assist in the monitoring and implementation of OSHA requirements., • Perform other duties as assigned. DESIRED SKILLS AND EXPERIENCE: • Solid ability to safely and properly use the following tools: ladders, lifts, basic hand tools, multimeters, amp probes, anemometers (airflow meter and hood), pressure gauges, drain augers, plungers, safety goggles, ear protection and fire extinguishers., • Knowledge of the operation of heavy equipment such as chillers, generators, switchgears, pumps, air handling units, etc., • Effective interpersonal and customer service skills to work with customers, co-workers and outside vendors., • Effective time management and personal organization skills; works with a sense of urgency; able to meet deadlines., • Solid understanding of computer technology including email systems, mobile smart phones, memos and spreadsheets., • Professional, effective written and verbal communication skills. Requires the ability to read, write and speak English to interact with co-workers and tenants, give and receive direction and complete tasks and work orders., • Ability to comprehend, analyze and interpret documents. Capable of defining problems, collecting information, establishing facts and drawing conclusions at a level appropriate for the position., • Ability to add, subtract, multiply and divide common units of measure and apply these concepts to practical situations. QUALIFICATIONS: • Valid driver’s license and clean driving record required, • High school diploma or equivalent, • Minimum 3 years’ experience in the building operation/maintenance field preferred, • Universal EPA Refrigerant Handler License required, • NATE Certified HVAC Technician, • Must hold a current Class 3 boiler license or Higher class. Will help obtain if needed.

Job Description Electro Mechanical Technician (New West Milwaukee Facility) Location: West Milwaukee, WI Type: Full-Time Schedule: 2nd Shift and 3rd Shift openings Due to continuous growth and product demand, Palermo’s has opened our third manufacturing facility. Who you’ll work for… While most companies that sell Pizza have no real connection to Italy, Palermo’s passion for food and family reaches all the way back to the country where Pizza was born. “Papa Palermo” carried the cherished recipes to America from Sicily! Innovation is at the heart of who we are. We use an entrepreneurial, forward-thinking approach resulting in high quality products that are consistently recognized by both the industry and consumers. Our commitment to quality has made Palermo’s a leader in private label frozen Pizza and manufacturing. We offer a $7,000 sign-on bonus! Our Electro-Mechanical Tech roles range from $27.00 to $44.80 per hour plus additional pay for weekends and holidays. $5.00 per hour shift premiums for 2nd shift and 3rd shift schedules. Perks… · 20 free Pizzas per month · Fantastic benefit offering starting on the 1st of the Month after Hire · Free uniforms & reimbursement for safety shoes, prescription safety glasses and tools · 401k & Roth with company match and fully vested on the 1st of the Month after Hire · Paid holidays plus a floating holiday of your choice · $7,000 sign-on bonus! · Relocation assistance Where you’ll work… · This role is based at our manufacturing facility in West Milwaukee, WI on Lincoln Avenue, our newest location – a 210,000 square foot, state of the art baking facility featuring modern equipment and expanded production capabilities. · Our Maintenance Team contributes to Palermo’s success by ensuring that our Plant operates at a world-class level with production uptimes over 98% What you’ll do… · Support our production teams by maintaining and repairing all production lines, troubleshooting and performing preventative maintenance on all machinery and equipment. · Install, repair, rebuild and maintain machinery and mechanical equipment used in production, packaging, and all other plant areas. · Be involved in all aspects of equipment from installation to rebuilding, fitting, and aligning equipment to meet quality and efficiency standards. · Demonstrate strong electrical knowledge and troubleshooting skills on controls such as, PLC’s, VFD’s, servos, robotics, and programable devices. Why you’ll be successful… · Proven ability to operate safely by following all food and people guidelines. · Utilizing knowledge from your 6+ years’ experience with mechanical repair, plumbing, welding, and electrical repair to facilitate seamless production functionality to deliver daily production goals. · Organized and methodical approach to problem solving – often in a time-sensitive, tight-deadline situation where accuracy is critical. · Designated lifelong learner with a strong interest in mastering new mechanical technologies. · Team player with excellent communication skills ready to work hard to ensure the whole Palermo’s team succeeds. Join us, and you’ll be part of a team that values hard work, collaboration, and celebrating success (with plenty of pizza along the way)!

Job Description Location: Position requires travel so the candidate can be located anywhere within the US. Why CCI? CCI Systems, Inc. is an Employee-Owned solution provider specializing in telecommunications, comprehensive network assessments, industry-leading engineering, drafting and design services, and 24/7 support services. Come join our team of engineers and experts that guide our customers toward the right choices to future-proof their network for years to come. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking a Field Engineer to provide technical expertise pertaining to customer network upgrades, services, field management and project administration with a full understanding of HFC distribution systems. Responsibilities • Assess Outside Plant (OSP) and Inside Plant (ISP) hardware and infrastructure including but not limited to plant documentation, Hybrid Fiber Coax, (HFC) active and passives, reading and understanding OSP diagrams/drawings, taking and maintaining accurate field notes, operation of a bucket truck, accessing network enclosures and nodes and operation of testing gear., • Correct customer network failures and improve overall network performance using sweep gear and CATV test equipment., • Diagnose and repair plant related issues to reduce upstream noise and forward path impairments within the cable system with the use of standard OSP tools to include OTDR's, TDR’s, light meters, and signal strength meters., • Conduct targeted system sweeps, document findings, and deliver system information to create system reports., • Perform head end and meter set up., • Perform DOCSIS 3.1 testing and assessments., • Calculate system signal losses and make necessary adjustments to resolve issues., • Reduce and diagnose upstream noise within the cable system., • Install/align/optimize HFC equipment including fiber optic nodes and related equipment., • Install in-line devices on system backbone (node, amplifiers, line extenders, taps, splitters, and power supplies) as necessary for sweep and system upgrade projects., • Work with customers, subcontractors, and other team members in the field to define, collect, and determine information from customers and customer facilities for project requirements., • Implement and oversee a team of technically sound, customer-minded, and quality focused technicians and subcontractors tasked with delivery of best-in-the-world services to CCI Systems, Inc. customers., • Assign daily workload to in-house technical staffing and subcontract labor to enable TFS to fulfill contract obligations with customers., • Work with project managers to ensure daily field operations, staffing, quality control and deliverables are driving necessary profitability goals per project., • Approve weekly project documentation; this includes subcontractor production reporting, in-house employee production reporting, technical documentation, and other necessary documentation., • Meet with customers at local level to discuss any project related issues., • Understanding the project SOW and escalation process for deviations., • Report accurate daily project updates for productivity tracking and project billing., • Define, develop, and share technical knowledge and stay current on technical advancements., • Ensure the proper development and training of new employees to assigned project., • 5-7 years’ experience as a Coax Splicer., • 5-7 years’ experience in a HFC Sweep/Technician role within the Service Provider space., • Consulting background and experience working with multiple customers preferred., • Sweep certification preferred., • DOT Certification & Bucket Truck and Safety Certifications preferred., • Test equipment will include but not limited to the following: VIAVI SCU 1800 Sweep Generator, VIAVI OneExpert ONX-630, VIAVI DSP TDR, OTDR, VOM, and Light Meter., • Full understanding of Viavi/JDSU gear regarding sweep; includes head end and meter set up., • DOCSIS testing experience., • Full understanding of an HFC head end; combining, optics (forward and return), and basic understanding of CMTS, FTTX, and ISP., • In-Depth understanding of OSP (outside plant) and proficient in troubleshooting., • Test result evaluation and reporting., • Able to work independently on projects and take direction from teammates and develop skills to advance professionally., • Strong verbal and written communication skills., • Ability to take direction and work within timelines., • Demonstrates leadership skills to positively influence others, mentor, and collaborate with teammates, communicate on the level of others, listen, and understand people in circumstances common in the workplace. Additional information • Approximately 75% nationwide travel is required, typically 14 days on-site, travel days, and 5 days off at home., • Must have a valid driver’s license and a good driving record., • Must be able to pass a DOT Medical Examination to obtain and maintain a DOT Commercial Motor Vehicle Certification., • This is a remote position when not traveling. #LI-DNI

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC SERVICE TECHNICIAN Job Responsibilities & Requirements HVAC Service Tech for company that handles service work and site maintenance for national accounts. • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations UcLP3K4r0U

Job Description Roofing Service Technician We are looking for a Roofing Service Technician to join our organization. If you are a person with a strong work ethic, and basic knowledge of construction or roofing who wants to become a commercial roofing professional and join our team. We will provide extensive paid training for you to be able make repairs and/or repair recommendations, perform evaluations and Roofing Preventative Maintenance to low slope roofing systems. You must be professional, presentable, and a good communicator as you will be dealing directly with clients daily. • Excellent earnings - $23.00- $29.00 per hour (Based on your commercial roofing experience)., • Three (3) annual bonus opportunities (safety bonus of up to $1,500.00 per year, individual performance bonus & company bottom-line bonus)., • GREAT BENEFITS- Paid Time Off, Health Insurance, Dental, Vision Care benefits, Free life insurance policy, and 401K plan., • Opportunity to advance, learn, grow, and increase your earning potential., • A military-friendly and veteran-friendly employer.What you'll do:, • Always follow safety on the job and while driving., • Inspect problem roofs, perform roof repair, and preventative maintenance., • Communication: Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; responds well to questions., • Dependability: Completes tasks on time; Follows instructions, responds to management direction., • Drives a company vehicle to clients’ buildings daily.What you'll need:, • Minimum 1 year of relevant roofing or construction experience, or military experience., • Driver's License (REQUIRED)., • 21 years of age or older (REQUIRED to drive company vehicle)., • High school diploma, or equivalent (REQUIRED)., • Ability to travel out of town, for up to 4 weeks at a time, when local work is not available (REQUIRED)., • Ability to work overtime and weekends when required., • Must be able to lift up to 50 pounds at a time on a regular basis throughout the day., • Must be able to frequently ascend/descend ladder from 10 to 40’ in height., • Must be able to remain in a stationary position for an extended period of time., • Constantly works in outdoor weather conditions., • Must be able to work in varied extreme weather conditions (extreme hot and extreme cold weather)., • Load and unload material and equipment and materials from variant heights., • Shovel loose materials such as gravel, sand metal snow, or dirt. Simon Roofing is an Equal Opportunity Employer and does not discriminate against any applicant on race, color, religion, national origin, gender, marital status, age, disability, sexual orientation, military/veteran status, or any other status protected by the Federal or State law or local ordinance. Note: The statements herein are intended to describe the general nature and levels of work performed by employees, but are not a complete list of responsibilities, duties, and skills required of the personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. FL License Number: CCC048202 I certify the information I have provided in this Employment Application is true and complete to the best of my knowledge. I understand that, if hired, discovery of any false information provided or any relevant information omitted (no matter when discovered) may result in the immediate termination of my employment. I authorize Simon Roofing and Sheet Metal Corp. (the "Company") to make whatever inquiries it deems necessary or appropriate of any person or organization to verify any of the information I have provided in this application and to determine my qualifications and abilities. I hereby release the Company from any and all claims or action or causes of action arising out of the Company's lawful inquiries and/or its determination of my qualifications and abilities. Powered by JazzHR nwsIVBYqq3

Job Description Nimmer Heating & Air Conditioning, Milwaukee, WI. We are family-owned company that has been dedicated to helping homeowners enjoy safe, comfortable homes for over 30 years. We provide heating, AC, air quality and hydronic heat solutions for our residential and light commercial customers. Serving the Milwaukee & Waukesha counties in installation, service and Maintenance. Passion for the craft. Care for the customer. We are Hiring an HVAC Service Technician to join our team! Looking for someone who shares our values of customer service and high-quality work. Servicing our residential and light commercial customers. We offer company-paid training, including NATEs and dealer training for the equipment we install and service. Reasons to consider working with Nimmer: • Full-time, year-round work, • Take home company vehicle, • Family owned and operated, be a part of a team, not just an employee, • Company Paid Training Industry Certifications as well as personal and professional growth and career planning., • Medical 80% employer paid, • Dental Insurance, • Vision insurance, • 40 hours of paid vacation, • 6 Paid holidays, • Phone allowance, • Company vehicle/tablet/uniform Work Hours: Monday through Friday, 7:00am to 4:00pm with occasional overtime Pay Rate: up to $90,000 depending on experience What you will be doing: • Provide maintenance and repairs on a wide variety of residential and light commercial heating and air conditioning systems according to company standards, • Excellent customer service, • Assist with training service apprentices, • Valid driver's license & insurable driving record, • 3 + years of continuous HVAC Service Experience with Boiler diagnostic and repair experience, • EPA Universal Certification, • Experienced in making repair and replacement decisions, • Experience in training and mentoring service technicians, • Advanced electrical and refrigeration principles, • Advanced troubleshooting skills and installation of residential and light commercial systems, • Ability to read and interpret wiring diagrams and blueprints and make accurate materials lists, • Nate Core Certification & acquire Specialty Certifications within 1 Year of hire, • Exceptional safety knowledge of tools, testing devices, and surroundings, • Knowledgeable in all HVAC low voltage systems, • Understand and communicate the benefits of preventative maintenance, • Demonstrate advanced customer service skills and have the ability to communicate clearly ideas and explanations of problems to residential and commercial customers and coworkers, • Able to invest time in company-paid service training seminars and classes, • Work from a 28' extension ladder and a 12' step ladder, • Certificate of completion from an HVAC Technical School desired, • High school diploma or its equivalent, • Valid driver's license & insurable driving record

STRATTEC Security Corporation is one of the world's largest suppliers providing access and security systems to the automotive market. This drives us to be an innovative company with the latest technology. STRATTEC creates exciting opportunities to people who like to work in an environment that challenges them to be creative, deal with multiple customers and projects, and research the latest technology. You will help STRATTEC to be a pioneer by working closely with the largest automotive customers in the world along with the largest electronic partners. Let us know who you are! We want to know what motivates you and why you are the ideal candidate for our growing team. The ideal candidate will possess a team oriented attitude; have a multidiscipline background, and a passion for innovation. We are looking for leadership skills to develop a new group internally. If you are one who like to build a team, has strong skillsets and likes to see your own ideas come to life, apply quickly! STRATTEC Security Corporation is a world-leader in designing and manufacturing vehicle access systems (keys, key fobs, push-to-start and passive entry systems, power lift gates, power sliding doors, steering column locks) and we supply to all of the major automakers. SUMMARY The Maintenance & Facilities Manager role will lead the Milwaukee facility’s skilled trades associates in the maintenance and facilities group covering building and grounds, utilities and manufacturing equipment covering processes such as die casting, stamping, plating, wastewater treatment, robotics, tooling and automated machining. This leader will proactively provide innovative common-sense repair solutions, simplify & standardize maintenance systems, and drive cost improvement initiatives with all items related to this role. PRIMARY DUTIES AND RESPONSIBILITIES • Hands-on leader that effectively plans work and dispatches resources for the facilities and maintenance group including skilled trade, utility, janitorial, maintenance crib and preventive maintenance planning associates., • Proactively and collaboratively identify, develop and deploy common-sense repair and maintenance solutions., • Align with key stakeholders to identify opportunities and drive continuous improvement initiatives such as repair part and breakdown reduction, PM optimization, maintenance crib inventory control, utility usage, minimization of outside services and consumable materials usage reduction., • Lead the development and implementation of structured business systems in maintenance designed for simplifying work planning, dispatch of resources, work plan execution, associate accountability and minimization of down time., • Ensure associates are adequately trained and meet all training requirements., • Complete all applicable administrative tasks such as performance reviews, union communications, associate development planning, resource planning, interviewing, associate reward and discipline, and documentation of associate issues., • Collect, review and analyze maintenance repairs and spare part usage data to identify trends and opportunities to eliminate equipment breakdowns, eliminate unnecessary work and permanently fix problems., • Leverage lean concepts and industry benchmarks such as visual factory, standard work, error proofing, single piece flow, six sigma, kaizen, TPM and Industry 4.0 to simplify the organization and eliminate decisions in all things related to maintenance and facilities. SUPERVISORY RESPONSIBILITIES This role will may have supervisory responsibilities for both salary and bargaining unit associates which will include interviewing, training, creating challenging objectives, planning/prioritizing work, appraising performance, providing constructive feedback, development and succession planning, and working with human resources to address all disciplinary/associate issues as necessary. QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE • Bachelor degree or equivalent experience., • 10+ years of experience in technical leadership role., • Hands-on process repair and improvement, work team coordination and project planning., • Understanding of handling hazardous waste, universal waste, HAZMAT, Accident First Response, Wastewater handling and containment and audit/corrective action., • Able to collect, analyze & interpret data to develop insightful solutions, and present in clear & concise format while understanding the appropriate details for each audience., • Working knowledge of state code regulations and OHSA requirements., • Ability to influence others thru good communication skills., • The ability to manage projects and work in a team project environment. STRATTEC SECURITY CORPORATION is an equal opportunity employer and practices affirmative action to recruit, hire, train, upgrade, transfer and promote persons in all job titles without regard to race, color, creed, religion, sex, age, national origin, disability or protected veteran status.

SUMMARY This role is responsible for troubleshooting, repairing, and calibrating CNC and production equipment to ensure reliable plant operations. The position offers hands-on technical work, exposure to advanced machinery, and the opportunity to build long-term skills in mechanical, electrical, and electronic maintenance within a stable manufacturing environment. RESPONSIBILITIES • Identify and resolve mechanical, electrical, and electronic issues across a wide range of standard and complex manufacturing equipment., • Utilize precision diagnostic tools such as meters, micrometers, torque tools, oscilloscopes, and laser alignment equipment to perform accurate repairs., • Interpret drawings, schematics, and specifications to complete equipment alignment, spindle and bearing work, and component fitting., • Fabricate and machine replacement parts as needed, including complex setups and precision layouts., • Install, maintain, and troubleshoot plant electrical systems, wiring circuits, and control panels in accordance with applicable codes., • Diagnose and repair electronic controls using relay logic, ladder diagrams, and digital control principles., • Coordinate with external vendors or service providers when specialized technical support or parts information is required., • Support equipment installations, removals, and upgrades, including millwright and wiring activities., • Assist other maintenance team members with advanced troubleshooting and corrective actions., • Operate material handling equipment as required and respond to emergency repair needs outside of standard hours when necessary., • Adhere to all safety protocols, including lockout/tagout procedures, and maintain a clean, organized work area. QUALIFICATIONS • Extensive knowledge of mechanical and electrical maintenance practices in a manufacturing environment., • Hands-on experience setting up and operating machine tools to produce repair and replacement components., • Strong understanding of hydraulic, pneumatic, and electronic control systems., • Ability to read and interpret blueprints, schematics, and detailed engineering documentation., • Working knowledge of basic math and trigonometry., • Completion of an apprenticeship program or equivalent technical training, plus approximately four to five years of related maintenance experience., • OSHA-related certifications or safety training preferred. BENEFITS • Stable, full-time first shift schedule supporting work-life balance., • Hands-on exposure to advanced CNC and manufacturing technology., • Opportunity to expand technical skill sets across mechanical, electrical, and electronic disciplines., • Collaborative team environment with access to experienced maintenance professionals., • Long-term career growth within a well-established manufacturing operation.

Job Description About Dave Jones, LLC At Dave Jones, we're committed to delivering top-notch service and solutions in heating, ventilation, air conditioning (HVAC), plumbing, electrical, and fire protection systems. Our passion for quality workmanship and client satisfaction drives everything we do. Join our dedicated team, where you can grow your skills and advance your career in a supportive environment. POSITION DESCRIPTION: As an HVAC Service Technician, you will be the face of our company and have a significant impact on our customers' experiences. Your expertise in diagnosing, servicing, and repairing HVAC systems will ensure that residential and commercial clients enjoy optimal comfort and efficiency. You will work independently and with a team, handling various service requests while upholding our commitment to excellence. COMPENSATION: • Hourly wage is set between $28.00 and $38.00 per hour, dependent on experience. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: • Perform diagnostic tests on HVAC equipment to identify operational issues., • Conduct repairs, routine maintenance, and installations on heating and cooling systems., • Provide excellent customer service by communicating clearly with clients about their HVAC systems and service progress., • Maintain accurate records of service and repairs completed., • Comply with safety protocols and local codes while executing service work., • Keep abreast of current industry technical developments and advancements. SCHEDULE: • Monday through Friday, • Valid HVAC Certification or License, • High School Diploma or Equivalent, • 3+ years of experience in HVAC service and repair, • Strong knowledge of HVAC systems, installation, and repairs, • Excellent troubleshooting and problem-solving skills, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Training & Development, • Wellness Resources, • Company Vehicle + Fuel Card

Job Description The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. Midwest Refrigeration, a TAG company is seeking Refrigeration Service Technicians for commercial service work in and around the Milwaukee, WI area Role Summary: The Journeyman Refrigeration Service Technician performs commercial service, maintenance, and repair on refrigeration systems including walk-ins, self-contained units, single systems, and rack systems. This role supports grocery and retail locations, ensuring systems operate safely and efficiently. Roles and Responsibilities: • Diagnose, repair, and maintain commercial refrigeration systems (self-contained units, walk-ins, single systems, rack systems)., • Troubleshoot electrical and mechanical refrigeration components., • Perform preventative maintenance on HVAC and refrigeration equipment., • Complete minor plumbing repairs (walk-in drains, case drains, cooling towers, water-cooled condensers)., • Inspect refrigeration, electrical, and plumbing systems to identify service needs., • Communicate service updates with store managers and directors., • Provide repair estimates and recommend equipment replacement when appropriate., • Maintain van stock, tools, and required safety equipment. Skills and Qualifications: • 2-5 + years of HVAC/R experience, • Strong diagnostic and mechanical skills, • Professional communication abilities, • Attention to detail and strong decision-making skills, • Ability to participate in on-call rotation, • Universal EPA Certification, • Electrical license, • 2–3 years minimum of grocery refrigeration experience, • HVAC/R technical school or related certifications Benefits: • Competitive pay, • Medical, dental, and vision insurance options, • Retirement savings plan with company contributions (401(k) or equivalent), • Paid vacation, holidays, and sick time, • Year-round, steady work, • Opportunities for career growth advancement, • Supportive, team-based work environment

We are working with with an innovative Aerospace and Defense company that is seeking a Buyer to join their team based in Milwaukee, WI. This individual will be responsible for assisting the manager with inventory control and customer demands Responsibilities • Create outsourced work orders, repair and overhaul purchase orders, • Execute follow-up and expediting tasks for repair and overhaul purchase orders, • Examine vendor teardowns, price, and work orders, • Write takedown reports for customer approval, • Assess and cultivate relationships with repair stations Requirements • Attention to detail, • Bachelor's degree and/or 1-3 years of similar experience, • Strong technical background, • Good written and verbal communication skills, • Experience in Microsoft Office

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact Pearce is seeking Experienced HVAC Technicians to join our team for servicing and repairing commercial HVAC equipment on telecom shelters located on Cell Tower sites. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside in the Milwaukee, Wisconsin area. Core Responsibilities • Maintaining cooling systems – diagnosing, troubleshooting, repairing, or installing and replacing components of entire systems., • Conducting performance checks and regular maintenance on HVAC equipment., • Performing additional maintenance or upgrades to out-of-season HVAC equipment., • Responding to service calls in a timely manner, including emergency call out services., • Timely and accurate completion of daily work reports. Core Experience • Must be Level 2 or Universal EPA Certified (Required)., • 3+ years of experience with HVAC maintenance (commercial preferred)., • Basic knowledge of electronic, mechanical, and electrical components including refrigeration systems is preferred. At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside in the Milwaukee, Wisconsin area., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds). At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$38 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job Description At Batteries Plus, we don't just power products-we power possibilities. As an Assistant Store Manager, you'll support daily store operations, assist customers, and back up the Store Manager to ensure every visit is a fully charged experience. You'll also be trained and certified to perform technical repairs on cell phones, tablets, and key fobs. If you enjoy leading by example, helping customers, and keeping a store running smoothly, this role is the perfect spark for your retail career. What You'll Do * Welcome and engage customers as they enter the store. * Assess customer needs and recommend appropriate products and services. * Provide sales guidance regarding promotions, warranties, and upselling opportunities. * Operate cash registers and process customer payments accurately. * Load, unload, and arrange products for customer purchases. * Build displays and set up or take down fixtures and shelves. * Assist with battery rebuilds and technical services as assigned. * Repair and/or replace parts for cell phones, tablets, light fixtures, and other devices. * Replace screens, batteries, and other components on smartphones and tablets. * Cut keys and reprogram key fob remotes. * Clean and restock the store before opening, throughout the day, and after closing. * Maintain store safety, appearance, and overall cleanliness, including mowing, snow removal, sweeping, mopping, dusting, vacuuming, and restroom maintenance. * Act as manager on duty in the Store Manager's absence; lead by example, support the team, and ensure smooth daily operations. * Ensure all tools and equipment are used according to safety protocols and company policies. * Follow all safety rules and regulations and wear proper Personal Protective Equipment (PPE). What We're Looking For * High school diploma or equivalent preferred. * Minimum 1 year of retail experience. * Strong communication and customer service abilities. * High level of professionalism and teamwork. * Problem-solving and conflict-resolution skills. * Basic math and cash register operation skills. * Comprehensive understanding of Batteries Plus products and services. * Valid driver's license and clean driving record. Why Batteries Plus Join a company that powers people's lives every day. Be part of a collaborative, fast-paced, and energizing team environment with competitive pay, comprehensive benefits, and opportunities for growth. Apply Today Bring your skills, energy, and attention to detail to Batteries Plus, and help us keep the current flowing-one customer, one repair, and one sale at a time. EEOC Statement Batteries Plus is an Equal Opportunity Employer. Applicants and associates are free from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, pregnancy accommodations, reprisal, other non-merit based factors, and any other protections afforded under state or local laws. Job Posted by ApplicantPro

Job DescriptionWhat you’ll do: The Tool & Die Maker will be responsible for fabricating and maintaining site tooling including but not limited to molds, dies, jigs, fixtures, gauges, and material handling tools. In this function, you will: -Fabricate, assemble, inspect and troubleshoot molds, dies, gauges, jigs, fixtures, prototype parts, machine parts, material handling equipment, and simple machines per engineering- and tool design specifications. -Perform gauge and fixture compliance inspection requiring measurement of critical features outlined on a master print, recording measurements onto the fixture qualification report, and any additional information into the quality compliance database. -Perform preventative and regular maintenance of dies, molds, fixtures, gauges, material handling equipment, and simple machines making improvement recommendations as necessary. -Work form tool requests, prints, sketches, sample parts, or verbal instructions and will utilize technical manuals, a machinery handbook, or general literature to determine machine speeds and feeds, proper clearances, and heat treat data. -Inspect your work with the use of precision instruments including but not limited to micrometers, Vernier calipers, height gauges, sine bars, jo-blocks, surface plates dial indicators, visual comparators, and CMM equipment. -Operate overhead cranes to move tool, dies, molds, and general materials. -Occasionally estimate jobs and prepare material llists including making recommendations in the design of new tooling and for modification of existing tooling to increase the reliability and performance of the tool. -Assist maintenance personnel in the repair and troubleshooting of equipment as needed. -Maintain a clean and safe work area, will adhere to all facility environmental, health & safety guidelines, will encourage communication and participate with co-workers to further identify, reduce and eliminate potential hazards. Qualifications: Required (Basic) Qualifications: -High school diploma or GED from an accredited institution. -A five-year apprenticeship for a Tool & Die Maker consisting of 576 hours of vocational instruction and 10,400 hours of on-the-job training with a Journeyman’s Toolmaker Certification. -Minimum one (1) year experience operating standard machine shop tools and CNC controlled equipment. -Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. -No relocation benefit is being offered for this position. Only candidates that currently reside within the immediate geographical area (50 miles) of the work location will be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation. Preferred Qualifications: -Minimum one (1) year of experience working with Autodesk CAD software. Skills: You should be proficient in: • GD&T, • G-Code, • Metal Stamping & Forming (Progressive Die), • Precision Measurement & Hand Metrology, • Tool/Die/Mold Repair Skills, • Blueprint Reading

Job DescriptionOverview We are seeking a skilled and experienced R&D Technician to join our team at our facility located in Milwaukee, WI, 53224. As an R&D Technician, you will play a crucial role in our research and development efforts, contributing to the design, testing, and improvement of our products (boilers and burners). This is an exciting opportunity to work in a fast-paced manufacturing environment and utilize your electrical and mechanical troubleshooting skills. Responsibilities • Conduct electrical troubleshooting to identify and resolve issues in product prototypes and existing designs, • Perform mechanical troubleshooting to diagnose and fix problems in machinery and equipment, • Collaborate with the R&D team to develop and test new product concepts and prototypes, • Assist in the design and modification of existing products to enhance performance and functionality, • Conduct experiments, collect data, and analyze results to support product development and improvement, • Maintain accurate documentation of test procedures, results, and any modifications made, • Assist in the installation, setup, and calibration of equipment and instruments, • Ensure compliance with safety regulations and protocols during all R&D activities, • Fabricate special parts or equipment. Qualifications, • Strong electrical troubleshooting skills, with the ability to diagnose and repair complex electrical systems, • Proficiency in mechanical troubleshooting, including the ability to identify and resolve mechanical issues in machinery and equipment, • Prior experience working in a manufacturing environment, preferably in an R&D or product development role, • Knowledge of HVAC systems and their components a plus, • Ability to read and interpret technical drawings, schematics, and specifications, • Excellent problem-solving and analytical skills, • Strong attention to detail and ability to work with precision, • Good communication and teamwork skills, • HVAC, • Electrical Troubleshooting Skills, • Mechanical Troubleshooting Skills, • Experience in a Manufacturing Environment

Job Description ESSENTIAL DUTIES & RESPONSIBILITIES: This list of duties and responsibilities is not all inclusive and may be expanded as management determines necessary. • Diagnose machine malfunctions and operating problems. Inspect machine and observe operation to detect the cause of malfunction. Make repairs and adjustments to keep machinery in production., • Repair and maintain company machinery as directed according to blueprints, catalogs, and data charts. Disassemble and rebuild machines, overhaul troublesome components and attachments. Involves dismantling, inspection, machining and/or replacement of purchased parts., • Select replacement parts from parts lists and catalogs. Lay out repair parts; set up and operate machine tools to machine parts. May improvise some tooling., • Perform machinist's work related to the installation of new machine tools or the relocation of existing machines. May work as part of a project team to complete assignment., • Perform routine housekeeping activities in work area., • Perform other duties as assigned. QUALIFICATIONS (KNOWLEDGE, SKILLS & ABILITIES): • High School Diploma or equivalent, • 3-5 years’ experience in diversified machine operations, • Requires knowledge of machining technology, electrical codes, mechanical principles, advanced shop mathematics, job layout and precision measuring procedures, setups, tooling application, and operating methods, • Must be able to lift a minimum of 50 pounds and move heavier objections with proper equipment, • Capable of operating a hoist/lifting equipment safely and effectively