Sales engineer jobs in Chandler, ArizonaCreate job alerts

Job Description Job Title: Process Engineer I Reports to: Director of Technology – North America Classification: Exempt Summary: This position entails appropriately applying fundamental engineering principles and concepts. Must be able to draw solutions from both formal training and experience. Under general direction, the Process Engineer I must plan and perform engineering duties for part of a major project or for projects of moderate complexity. They may provide work direction to Technicians and less experienced Process Engineers. Work is primarily involved with the development or improvement of actual products or designs. The typical cycle includes conceptualizing, developing prototypes, testing, and perfecting designs. Essential Duties and Responsibilities: To perform this job successfully, individual must be able to perform each of the primary duties satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required: • Presents EVG technology to prospective customers., • Organizes and performs equipment and process demonstrations for and with prospective customers., • Provides process support to customers (remotely and onsite), sales and service staff., • Organizes and performs contract services for and with customers., • Creates technical reports., • Must be able to travel domestically and internationally overnight, as needed, up to 50% of the time. Must possess a valid passport., • This position requires the use of EVG hired vehicles on EVG business. Individuals must be physically capable of operating the vehicles safely, possess a valid driver’s license and have acceptable driving privileges., • Other duties, as assigned. Additional Duties and Responsibilities: • Ability to work well under minimal supervision as well as with a team., • Works with Technology Administrator to learn policies and procedures within the Technology Department., • Complies with EVG and ASU-MTW lab policies., • Maintains EVG’s cleanroom and equipment. Tracks consumable usage and reorders supplies as necessary., • Ensures OSHA compliance in lab. Qualifications / Education / Skills and Experience: • Individual must have a four-year engineering degree. Chemical, Mechanical or Materials Science and Engineering degrees are preferred., • Applicant should have up to two (2) years of process engineering experience., • Excellent oral and written communication skills with the ability to effectively present information to factory employees and engineers., • Strong computer skills including proficiency with MS Office software., • Ability to work in cleanrooms. Physical Demands: • While performing duties of this job, individual is regularly required to stand, sit, reach with hand and arms, stoop, kneel, crouch, crawl and lift/move up to 50 pounds. Visual acuity required. Individual is required to use hands to finger, handle or feel objects, tools, or controls frequently and be able to reach with hand and arms above shoulder level occasionally., • Ability to wear proper cleanroom attire and work inside the fab/cleanroom up to 75% of the time. This job description in no way states or implies that these are the only duties to be performed by the employee in this position. Employee will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Job DescriptionSalary: About Us: SyberJet Aircraft is a leading innovator in the development of advanced light jets, focused on delivering cutting-edge aviation solutions with a commitment to quality, performance, and safety. We are looking for a highly skilled and experienced Senior Electrical Engineer to join our growing team and contribute to the design, development, and integration of electrical systems for next-generation aircraft. Job Description: The Director of Sales is the primary point of contact and dedicated sales professional responsible for managing and converting all inbound sales inquiries for SyberJet's high-performance light business jets. This is a high-touch, service-oriented role requiring exceptional responsiveness, industry knowledge, and the ability to guide prospects through a complex, long-cycle aircraft acquisition process. Significant travel (up to 50%) is an inherent requirement, involving attendance at industry events, managing demonstration flights, and meeting prospects globally. The role demands an ability to represent SyberJet with distinction in any in-person setting, meeting the standards of excellence set by industry leaders like Bombardier and Gulfstream. Key Responsibilities: Inbound Lead Management & High-Touch Service • Own the Pipeline: Serve as the single point of contact for all SyberJet aircraft inquiries generated through the website, events, phone calls, and other marketing channels., • Immediate Response: Ensure an immediate and high-quality response to all inbound leads, establishing a professional and client-centric relationship from the very first interaction. Establish an impeccable customer experience throughout the sales process, • Qualification and Discovery: Rapidly qualify prospects based on need, financial capability, and mission requirements, utilizing advanced discovery techniques to understand their specific business aircraft needs and preferences., • Global Travel Requirement: Must be willing and able to travel extensively (up to 50% globally) to attend events, meet prospective buyers, conduct aircraft showings, and manage demonstration flights., • Industry Presence & Events: Actively represent SyberJet at all key industry airshows (e.g., NBAA, EBACE, regional events), static displays, and VIP customer functions. Must possess the poise and professionalism to host and engage high-net-worth clients at events., • Product Expertise: Maintain an expert-level understanding of the SyberJet aircraft specifications, performance metrics, operating costs, and competitive advantages against similar light jets and mid-size aircraft., • Market Analysis and Valuation: Prepare and present compelling market analysis, competitive comparisons (including Bombardier and Gulfstream aircraft in other segments), and accurate aircraft valuations to support proposals., • Deal Negotiation: Lead all sales negotiations, manage the drafting of purchase agreements, and collaborate with legal and finance teams to successfully close complex, high-value transactions. Qualifications & Requirements: Experience & Education • 10+ years of progressive experience in high-value, complex sales, with a minimum of 5 years in business aviation, aerospace, or a related high-value luxury goods/services sector., • Proven track record of consistently meeting or exceeding sales targets in a long-cycle sales environment., • Bachelor's degree in Business, Marketing, Aviation Management, or a related technical field is preferred., • Exceptional Communication & Presence: Outstanding written and verbal communication skills, necessary for professional correspondence and a commanding, professional presence when engaging clients and industry peers in person., • Global Mobility: Ability to maintain a demanding travel schedule and manage the logistics of international travel effectively., • Customer Focus: A demonstrably superior customer service mindset, emphasizing relationship-building, discretion, and a relentless focus on the client experience., • Strategic & Analytical: Ability to interpret market data, analyze competitor strategies (including those of Bombardier and Gulfstream), and develop tailored sales strategies., • Negotiation Prowess: Superior negotiation and contract management skills to maximize deal value while maintaining long-term customer relationships. What We Offer: • Innovative Work Environment:Be part of a dynamic team at the forefront of developing advancedaircrafttechnologies., • Impactful Projects:Contribute to the design and production of next-generation jetaircraft., • Competitive Compensation:Attractive salary and benefits package, including health, dental, vision, and retirement plans., • Collaborative Culture:Join a team of highly motivated professionals working together to push the boundaries of aerospace engineering.

Job DescriptionDescription: Methods Machine Tools, Inc. supplies high-quality, high-precision machine tools and automation solutions, and designs integrated custom machining processes and systems. Headquartered in Sudbury, Mass., and in operation since 1958, Methods provides an end-to-end portfolio of best-in-class products, engineering, service, parts, training, and integration. Methods has more than 300 employees, seven technology centers, one high precision machining center, and has installed in excess of 45,000 machines throughout North America. The following position is available at our office in Tempe, AZ: Applications Engineer Position Overview: This position is responsible for supporting the application, setup, programming, and operation of CNC machines. The ideal candidate will have expertise in CNC programming, machining processes, and the ability to support customers with technical issues. Position requires occasional overnight travel. Key Responsibilities: • Technical Support: Provide technical application support to customers, both remotely and on-site, ensuring CNC machines are running efficiently., • Machine Setup & Operation: Assist in the initial setup and configuration of CNC machines, ensuring optimal machine performance., • Programming & Troubleshooting: Develop, modify, and optimize CNC programs. Troubleshoot and resolve any issues related to machine operations, including software and hardware challenges., • Customer Training: Train customers on CNC machine operations, programming techniques, and machine maintenance to maximize productivity and ensure safety., • Documentation: Create and maintain detailed documentation for programming, procedures, and troubleshooting steps., • Product Testing: Conduct tests and demonstrations of new CNC systems, providing feedback to engineering and product development teams., • Collaboration: Work closely with sales teams to tailor CNC solutions to customer needs., • Education: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or related field. Relevant certifications and training in CNC technologies are a plus., • Experience: Minimum of 10 years of hands-on experience with CNC machine operation, programming, and applications in manufacturing or production environments., • Skills:, • Proficiency with CNC programming languages (e.g., G-code, M-code, Fanuc), • Strong knowledge of CNC machine types (e.g., mills, lathes, multi-axis machines)., • Understanding of machining processes, cutting tools, and materials., • Experience in troubleshooting and resolving technical issues with CNC equipment., • Excellent problem-solving and analytical skills. Strong communication skills for customer support and internal collaboration., • Ability to train and mentor staff or customers effectively., • Experience with CAD/CAM software, • Familiarity with automation and robotics in CNC manufacturing environments., • This position may require travel to customer sites for installations, training, and support. · Medical, Dental, Vision, Paid time off, Education Assistance, 401(k) Plan, and great opportunity for career growth. Methods Machine is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Requirements:

Job Description Why DH Pace? DH Pace Company is a distribution, construction and service organization offering a complete range of door and door related products and commercial security products. The company is privately owned and has been in operation over 95 years! We have 50+ US offices in 24 states with 2024 company-wide sales over $1 billion. Our mission is to enhance the communities we serve by improving the safety, convenience, and aesthetics of the buildings where we live, work, and play. Our foundation of values represents who we are and what we stand for. Values are never situational or circumstantial, they are always and forever. Our core values are R.I.S.E. Respect, Integrity, Service, and Excellence. DH Pace Company Inc. aspires to hire New Construction Sales Representative in Tempe, Arizona who will have sales responsibility for new construction sales for the commercial construction side of our business specializing in commercial sectional & rolling door products, loading dock equipment, and high- speed doors. This position is responsible for introducing commercial customers to products and services in Tempe and surrounding areas. Position Overview: • Establish and foster long-term relationships with general contractors in Tempe and the surrounding areas., • Meeting with decision makers to engineer a door solution for customers' facilities, • Develop scope of work for each proposal and personally handle every detail from initial call to closing the sale; must be proficient with Windows based programs and sales tools and ideally have worked with Blueprints/Plans, • Achieve sales objectives set forth by management, track and record sales leads and activities and actively participate in sales meetings, • Provide timely, accurate estimates and proposals, • Maintain and update Customer Relationship Management System (CRM) daily, • Prefer a minimum of three (2) years outside sales experience calling on general contractors, distribution and industrial markets, • Must have a strong aptitude for technical applications and/or mechanical systems, • Must possess a Valid Driver's License, • Bachelor's degree, highly preferred, • Ability to read and understand blueprints, coupled with prior Estimating experience generating proposals and submittals is a plus; however, not required if capable of learning the process of working with technical applications Our benefit offerings include: • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, and drug screen required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description Job Title: Radio System LMR Pre-Sales Engineer Location: Tempe, AZ Employment Type: Full-Time Industry: Land Mobile Radio / Wireless Communications Company: Air Comm About Us Air Comm is a trusted leader in mission-critical communications, specializing in the design, deployment, and support of Land Mobile Radio (LMR) systems for public safety, utilities, heavy industrial, and enterprise customers. As we grow our solutions team, we’re looking for a talented and motivated Pre-Sales Engineer to support our clients and sales team with technical expertise and system design for complex LMR projects. Position Overview The LMR Pre-Sales Engineer will serve as a technical consultant and subject matter expert during the pre-sales process. You will work closely with sales representatives, field engineers, project managers, and customers to design and propose reliable, scalable radio communication solutions, including P25, DMR, and analog systems. Additionally, some surveillance camera and access control quoting may be required. Key Responsibilities • Collaborate with the sales team to qualify opportunities and define technical solutions for LMR systems, • Develop system designs, coverage predictions, and equipment proposals based on customer requirements, • Create system diagrams, network topologies, and bill of materials, • Present technical content and demonstrations to customers, including RFP responses and bid presentations, • Conduct site surveys, RF propagation studies, and link budget analysis, • Serve as a liaison between sales, field engineering, project management, and the customer, • Stay current with LMR technologies, industry trends, and vendor offerings, • 3+ years of experience in LMR communications (P25, DMR, analog, or trunked systems), • Desire to learn about surveillance cameras and access control, • Strong knowledge of RF propagation, antenna systems, and network infrastructure, • Experience with coverage prediction tools like EDX, iBwave, RadioMobile, or Motorola’s LinkPlanner is a plus, • Understanding of public safety requirements, NFPA/UL standards, or DAS/BDA regulations desirable, • Excellent written and verbal communication skills, • Ability to manage multiple projects and prioritize effectively, • Degree in Electrical Engineering, Telecommunications, Electronics or related field preferred The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees. It is the policy of Air Comm to fill every position without regard to race, color, religious creed, sex, marital status, physical disability, mental disability, medical condition, age 40 and over, national origin, ancestry, sexual orientation, gender identity, genetic information, military or veteran status, or any other basis made unlawful by applicable law. Air Comm is an equal opportunity employer, and strictly prohibits unlawful discrimination by any employee, including managers, supervisors and co-workers.

Job DescriptionNow Hiring ISO 17025 Regulatory Compliance RF Test Engineers TIC Industry aka. Testing, Inspection, FCC-CE Certification of Wireless & Connected Devices Full or Part Time, Full Time or Retired Test Engineers Welcome. Previous experience working as a Regulatory Test Engineer in RF a huge plus! RF Testing, Radiated, Conducted Emissions & Immunity EMC/EMI experience. We test electronic devices to FCC CE ISED test standards Advanced manufacturing & emerging tech innovation is making the Arizona market one of the big winners of technology growth. A great quality of life, with a great smaller business where your voice gets hears. Be part of a team / family. Come help us grow & shape our exciting future! Seeking candidates who want a long-term home & want to make an impact. Special skills: Competent on Spectrum Analyzer, Network Analyzer, Signal Generator and other lab equipment. Who We Are: Established in 1963, CT is Arizona's oldest, largest & fastest growing regulatory compliance test lab. We are accredited regulatory bodies like the FCC, European Commission, Canada, the UK & more to ensure products adhere to regulatory standards required before products can be marketed or sold in those countries. While we provide a wide variety of services and hold a broad accreditation scope of testing, LTE/4G/5G/ LORA / Radar/ Sat Com/ WiFi / Blue Tooth / cellular are our largest areas of growth due to products like IoT, IIoT, sensors, Radar, Telecom, MedTech, Robotics & Wearable Devices. As a 60 year old mid sized lab with employees around the world. This position would be onsite in Arizona, just east of Phoenix. We collaborate with our team, to build a great team/family and culture. Monthly opportunity meetings where the entire organization brainstorms how we get better, our culture committee & our values, our training & education, the fact we were founded by an engineer, and most importantly. . . OUR PEOPLE make CT the place where you not only want to grown in a career but also enjoy spending your time, knowing privately-held leadership has your best interests in mind loves getting input and feedback. Role of Regulatory Compliance Radio Frequency (RF/Wireless) Test Engineer Be a key member of the RF SME test team with lots of opportunity for growth and promotion in your career path. Work closely with Lab Manager & Lab Supervisor, and support Technical Sales Team. Key Value Added Contributions Include: • Strong experience performing testing to regulatory standards on a wide variety of devices; understanding of regulatory standards. Competent and accurate in your testing, project management, communications, sales support, reporting and interacting with the team., • Support Technical Sales Team in validating test standards & collaborating to generate test plans, estimate project hours., • Help support & participate in ongoing quarterly tech trainings., • Help prepare internal & external projects and oversee the projects., • Interest in trouble shooting failing devices., • Client interactions throughout the testing process., • Good with maintaining record keeping, and test data entry on projects., • Ability to answer general questions with respect to our test scope found here: Lab Scope and Certification, • Knowledge of FCC parts including 15b, 15c, 15e, 15.247, 22, 24, 27, 90 (and equivalent Canadian rules)., • Familiarity of FCC parts 18, 30, 73, 74 & 87 (and equivalent Canadian rules). Other rule parts a plus., • Knowledge of EU RED and EMC Directives and associated standards (especially with regards to the areas covered in the FCC rule parts above)., • Basic knowledge of industry associations such as GCF, PTCRB, CTIA, Wi-Fi Alliance, BT SIG, LoRa Alliance, etc. a plus.Requirements:, • 2-4+ years prior RF Testing experience at an actual Regulatory TIC ISO 17025 Test Lab or cellular, mobile OEM department similar to ours, testing various devices to multiple FCC standards & rule parts., • Ability to legally work in the United States of America or clear path to in the next 30 to 60 days or less., • H1B support is possible., • Ability to physically work from our headquarters based in Mesa, Arizona (Greater Phoenix-Metro)., • High detail-orientated & accuracy focused., • Professional with effective listening, communication & logic skill-sets and interaction with customers., • Tech savvy; not only in the lab but using business tools like Microsoft Office Suite, Excel, Outlook, Google Drive, Microsoft Teams, Zoom, Calendly, etc., • Accountability & Integrity, Character, Ethics are key, • Positive attitude, this is for someone who is looking for a long-term home where they enjoy the culture & other people they work with; a great TEAM.Compensation, Benefits and Perks:, • Salary is based on skills & fit as we are hiring for multiple roles, • Benefits include medical , 401K, PTO, performance incentives & more. Additional Info: • 401(k), • Health insurance, • Paid time off, • Professional development assistance, • Referral program, • Relocation assistance, • Tuition reimbursementSchedule:, • Day shift, • Monday to FridaySupplemental pay types:, • Bonus payExperience: ISO 17025 Testing: 1 year (Required) FCC Testing: 1 year (Required) EMC/EMI: 1 year (Preferred) FCC Part 15 testing: 1 year (Required) Work location: In person Powered by JazzHR xr4hGnBMIP

Job Description About NovaSource NovaSource Power Services is the world’s #1-ranked solar operations and maintenance (O&M) provider and insight-driven total asset optimization partner for renewables asset owners ready to fuel smart growth. With over 20 years of operating experience and a presence on 5 continents, NovaSource has the global reach and strategic capabilities to achieve our clients’ renewables goals around the world. NovaSource’s comprehensive approach to total asset optimization in addition to O&M services includes value engineering, performance analysis, strategic supply chain management, and advanced monitoring systems. The company operates in key global markets managing over 30GW of solar power plants. NovaSource’s expertise extends beyond solar and includes battery energy storage systems (BESS), offering a complete suite of services for the evolving renewable energy landscape. Summary of Role At a high level, the Senior Performance Engineer is managing the portfolios of solar PV generating fleets. This is an internal stakeholder and external customer facing role. Key responsibilities will center around maintaining operating indicators at high levels, alerting service managers of trending issues, providing research and analytical support for diagnosing field problems, creating and executing on plant betterment action plans, and developing advanced computational methods. Also, as a core member of the O&M team, the Senior Performance Engineer may be involved in complex contract negotiations as the representative subject matter expert. The Senior Performance Engineer will grow into a high-level position and will eventually become an expert on solar generation theory was well as data evaluation and diagnostic techniques. Sign-on bonus: Offering a $2,000 signing bonus. Duties and Responsibilities: Performance Theory and Modeling The Senior Performance Engineer will have deep knowledge of the theory and computer modeling platforms to simulate PV plant performance, determine if installed systems are exceeding production targets, and providing general diagnostic assessments when needed. The Senior Performance Engineer will need to keep abreast of latest theoretical developments and technologies. This may require participation in international code writing committees, presenting papers, and moderating panels at international symposiums. Analysis and Reporting The Senior Performance Engineer will be the designated contact for a set of operating plant, and they are accountable for accurate data and obligated reports. Additional analyses may be assigned at the request of external and internal customers. These evaluations will assess items such as equipment health, financial projections, energy credits, degradation, soiling, system issue diagnosis, and economic optimization. Some custom reporting will be as required by specific customer contracts or regulatory bodies. Further, the Senior Performance Engineer will develop methods that improve automated reporting systems in the areas of data validation, missed data collection, data curation, and troubleshooting tools. Performance Monitoring The Senior Performance Engineer will work closely with our remote operations centers and may assist in the development of advanced monitoring tools used to detect fleet operating issues. Work will include deriving more powerful metrics and techniques such as predictive maintenance triggers. Plant Betterment The Senior Performance Engineer will help improve the bottom-line for our customers by proposing solutions to improve equipment uptime and generation potential. This may be completed by diagnosing issues that degrade capability and proposing recommended solutions. These solutions may involve capital investment in equipment and improved processes. Solutions may require the participation of other company departments as well as customer engagement. The Performance Engineer shall create clear and concise proposals. If accepted, the Performance Engineer may be expected to lead their project to completion. Instrumentation and Measurement Uncertainty The Senior Performance Engineer will have a solid understanding of instrumentation systems including primary sensors, analogue to digital conversion, signal conditioning and scaling, data logging, transport and archival. Specifically, an understanding is most important for power meters and meteorological measurement devices (insolation, and ambient conditions). The Senior Performance Engineer will have a solid understating in the statistical propagation of measurement error and will have the ability to conduct a formal uncertainty analysis that provides confidence intervals surrounding results based on instrumentation systems and correction methods. Performance Testing The Senior Performance Engineer may be responsible for the demonstration of project guarantees. These efforts include authoring and ratifying performance test procedures, being responsible for the accuracy of all instrumentation and confirming that the installed instrumentation meets testing goals, being responsible for the accuracy of all calculations. If necessary, the Performance Engineer will direct all testing activity that includes coordinating all stakeholders and publishing final reports. Sales Support /Contract Negotiations The Senior Performance Engineer may assist our sales teams by: establishing project guarantees and the associated risk, review of performance models that project guarantees, negotiate agreements, assist in a timely fashion on sales support and customer negotiations as the performance expert. Education, Skills, and Related Work Experience (5-10 years in performance engineering, reliability engineering, or similar) • Bachelor’s degree in engineering, math, or physics. Graduate degree a bonus., • Training in energy systems is preferred with some understanding of PV performance prediction. This includes resource assessment, sky transposition models, mono/poly/thin film PV module characteristics, inverters, array soiling and shading, DC and AC collection systems, and power grid dynamics., • Proficiency with Python or Matlab type programing environments. Python is preferred., • Ability to communicate efficiently and accurately in the spoken and written English while conveying a sense of professionalism, courtesy, and competency, • Demonstrated analytical skills with the ability to accurately describe the relationship between physical events and trends in measured data of highly complex systems, • Ability to work in cross-matrix teams of peers to efficiently complete highly complex projects and goals., • Ability to share technical expertise with team members and mentor others for success., • Ability to prioritize and execute multiple projects and tasks., • Ability to work onsite in our Chandler, AZ office is preferred. However, for highly experience candidates, remote flexibility may be available. Benefits: • Competitive compensation package + Paid Time Off (PTO)., • Health Coverage: Comprehensive and affordable medical, dental, and vision plans effective on your first day., • Flexible Spending & Health Savings Accounts (FSA/HSA): Options to help you save on healthcare costs., • Career Growth: On-the-job training with a clear path for advancement., • Income Protection: Company-paid short-term and long-term disability insurance., • Legal Support: Access to legal assistance services., • Employee Assistance Program (EAP): Confidential counseling and support resources., • Retirement Savings: 401(k) plan with employer matching contributions., • Additional Perks: Pet insurance and more employee benefits. Office Physical Requirements: All positions in our office require interaction with people and technology while either standing or sitting. In order to best service our customers, internal and external, all associates must be able to communicate face-to-face and on the phone with or without reasonable accommodation. NovaSource is committed to compliance with its obligations under all applicable state and federal laws prohibiting employment discrimination. In keeping with this commitment, it attempts to reasonably accommodate applicants and employees in accordance with the requirements of the disability discrimination laws. It also invites individuals with disabilities to participate in a good faith, interactive process to identify reasonable accommodations that can be made without imposing an undue hardship. Potential candidates will meet the education and experience requirements provided on the above job description and excel in completing the listed responsibilities for this role. US: Diversity Statement – Equal Employment Opportunity It is NovaSource’s policy to provide equal employment opportunities to all applicants and employees. NovaSource disapproves of, and will not tolerate, unlawful discrimination against any applicant or employee because of race, color, national origin or ancestry, gender (including pregnancy, childbirth, or related medical conditions), gender identity, age, religion, disability, family care status, veteran status, marital status, sexual orientation, or any other basis protected by local, state or federal laws.

Job Description Job Title: Technical Support Engineer (Software) Reports to: Technical Support Supervisor Classification: Non-Exempt Summary: Technical Support Engineer (Software) will be responsible to handle software related escalations from customer support, coordinating technical, commercial, training, and logistic support between customers, field service engineers and management. Technical Support Engineer (Software) will coordinate stated activities with HQ technical support, Customer Support, R&D, product management, QA, manufacturing, and Sales. The position will also function as onsite support during an equipment escalation, if required, within the North American geographic region. Essential Duties and Responsibilities: To perform this job successfully, the individual must be able to perform each of the primary duties satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. • Planning and execution of assigned software specific tasks., • Execute independent testing and qualification of EVG equipment software., • Prepare, report, and communicate software specific topics to customer (risk analysis, change documentation, function test protocols)., • Responsible for organizing, tracking, and filing all software revisions (for all relevant equipment types) for North America as required by HQ., • Participate and/or lead failure analysis with HQ R&D departments., • Provide support to regional technical support team in all software specific matters, including log-file analysis and information acquisition., • Maintenance of all software products on customer equipment (patches, backups, version updates)., • Perform data and performance analysis of the installed base at key customers. Ensure technical support issue tracking system is fully adhered to. Research internal and external equipment configuration inquiries., • Provide customer training for EVG applications like analytics, FabAutomation DataViewer and the like and help data parsing and understanding., • Develops, recommends and/or implements field and customer on-the-job training requirements., • Coordinates customer and affiliate meetings, teleconferences, visits, and support logistics., • Develops strategies with customers and onsite engineers for collection and reporting of equipment performance data and generation of reliability reports., • Visits customers and affiliates to review customer issues and provides required technical support and recommendations. Additional Duties and Responsibilities: • Help troubleshoot SECS/GEM and other factory automation systems., • Develops and implements plans to increase productivity through tracking equipment performance and plan uptime improvement., • Keeps informed and trained on the company’s most current systems, methods, and procedures., • Prepares troubleshooting and repair guides for Best Known Methods., • Mentors and provides technical assistance and training to less experienced personnel., • Exhibits good housekeeping practices in all work areas. Qualifications / Education / Skills and Experience • This position requires an associate degree or bachelor’s degree in a related engineering field or up to three (3) years of experience installing/repairing semiconductor/electronic production equipment., • At least two (2) years of experience with an EVG tool platform, preferred., • Strong technical knowledge of electronics at a level to troubleshoot from schematics and understand functions of standard electronic components., • Advanced electromechanical troubleshooting skills., • Knowledge of statistical process control., • Familiarity with common tools and understanding of vacuum systems, motors, encoders, hydraulics, pneumatics, and robotics., • Knowledge of quality improvement process methods and terminology., • Ability to identify and solve advanced process-related system problems., • Strong customer support and interpersonal skills to be able to interface with Field Service Engineers and customers under stressful conditions while maintaining a professional demeanor, respect, and courtesy at all times., • Ability to communicate and demonstrate professional conduct with all levels of Management and personnel., • Strong organizational skills., • Complete understanding of international logistics ad project schedule/management., • Must possess skills that can assist with cross-functional team building., • Must have strong negotiation skills and understanding of other cultures., • Must have strong PC skills including Word, Excel, PowerPoint, and Windows (knowledge of SAP, Canbus, and Motion controllers preferred)., • Must be able to work extended hours and/or flexible shifts, as required., • Must be able to travel domestically and internationally overnight, as needed, up to 30% of the time. Must possess a valid passport. Physical Demands: • While performing duties of this job, individual is regularly required to stand, sit, reach with hand and arms, stoop, kneel, crouch, crawl and lift/move up to 50 pounds. Visual acuity required. Individual is required to use hands to finger, handle or feel objects, tools, or controls frequently and be able to reach with hand and arms above shoulder level occasionally., • Ability to wear proper cleanroom attire and work inside the fab/cleanroom up to 30% of the time. This job description in no way states or implies that these are the only duties to be performed by the employee in this position. Employee will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Job Description About Alta E&I Alta Environmental & Infrastructure is one of Arizona’s fastest-growing engineering firms, with nearly 250 employees across the state. We’re 100% Arizona owned and managed, which means you’ll never feel like a number here. Our team delivers a full spectrum of services - civil engineering, surveying, geotechnical and materials testing, environmental, and EHS - giving you exposure to many paths and projects. Alta is big enough to offer opportunity, and advanced technology - yet small enough that you’ll know your team, see your impact, and have leadership that knows you. We’re proud to be a trusted partner to some of the nation’s largest corporations, developers, and public agencies - helping to build the future, while also protecting it through environmental stewardship and sustainable solutions. General Summary: We are seeking a driven and detail-oriented Project Manager to join our Geotechnical team. The ideal candidate will have their Engineer in Training (EIT) certification, a strong foundation in geotechnical principles and/or construction materials testing, and proven experience managing projects from conception to completion. This role will involve both technical and managerial responsibilities, with an emphasis on quality, safety, and client satisfaction. Primary Duties and Responsibilities: • Follow safety rules and standards for all projects., • Engineering professional with responsibility for managing detailed phases of projects with moderate size and complexity., • Independently perform a variety of projects or selected segments of larger projects., • Make design, engineering, and construction recommendations, adaptations, and modifications., • Prepare proposals and reports for small and large projects of varying complexity., • Perform quality control review of proposals written by others., • Evaluate complex laboratory and field data for inclusion in reports. To perform this job successfully, an individual must be able to perform each essential duty proficiently. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Bachelor of Science degree in Civil Engineering, Geotechnical Engineering, or a related field., • Engineer in Training (EIT) certification required., • Minimum 1–3 years of geotechnical or construction engineering experience., • Excellent written and verbal communication skills., • Proficient in relevant software (e.g., MS Office Suite, gInt, or AutoCAD). See your impact. How many people can drive by a highway, school, or major company and say, “I helped build that?” At Alta, every employee can. The work we do is visible in the infrastructure communities rely on every day. We’re passionate about developing people. Many of our leaders began their journey in entry level positions, and worked their way up into management. We invest in you from day one with hands-on training, paid certifications, and mentorship to help you progress in your career. Working at Alta means: • Career mobility: clear paths to grow into leadership roles., • Multi-disciplinary exposure: civil, survey, geotechnical, materials testing, environmental, EHS, etc., • Investment in you: paid certifications and ongoing training., • Culture of belonging: supportive teams where your work is recognized. Benefits • Competitive salary and performance-based bonuses., • Comprehensive health, dental, and vision insurance., • 401(k) plan with company match., • Opportunities for professional development and career advancement.

Job Description Job Summary: SCREEN is looking for an experienced Field Service Engineer to provide customer support to include installation, maintenance, and/or site contract support for state-of-the-art semiconductor manufacturing/processing equipment. Essential Job Duties & Responsibilities: Evaluate and diagnose issues, perform accurate repairs, and demonstrate the ability to succeed in a fast-paced environment with fluctuating workloads. Proficient in using alignment tools (micrometers/calipers/multimeters/current clamp), with strong skills in reading schematics/plumbing diagrams. Capable of interpreting data and technical information effectively. Collaborate with colleagues, customers and field support teams to isolate and resolve issues under strict time constraints. Position may require travel to other customer sites or for training purposes. Job Requirements: Must have a strong customer focus and commitment to customer satisfaction. Must be able to work independently or as part of a team, follow strict procedures, and all safety protocols while working at customer sites. Attention to detail and a high degree of accuracy. Mechanical and electrical aptitude. Excellent written and verbal communication skills. Proficiency in MS Office programs. Must be able to pass customer background check. Familiarity with chemical handling, use of Personal Protective Equipment (PPE), and cleanroom environment. Must be able to pass medical test and certification/training for respirator use. Routinely required to sit, walk (approx. 10K+ steps per day), crouch, use hands, stoop, kneel stretch, twist, and reach. Must be able to work in confined spaces, climb steep ladder/stairs, and lift and/or move up to 35 pounds. Work within moderate temperatures and noise levels. Education & Experience: Position requires an Associate Degree in an Engineering field. Completion of applicable military technical training and/or technical field experience may substitute for an Associate Degree. Company DescriptionSCREEN SPE USA, LLC SCREEN SPE USA (SEUS) was established in 1987 in Sunnyvale, California. SEUS is a sales, marketing, engineering and service organization responsible for operations in the US market for SCREEN Holdings Co., Ltd, Kyoto, Japan. SEUS now has 8 major local offices in the US to better serve our customers. SCREEN Semiconductor Solutions, Co., Ltd is a manufacturer of semiconductor equipment for the lithography coat/develop and wet cleaning/etching processes. SCREEN is well known in the industry for manufacturing the most reliable equipment used in the production of semiconductor wafers and has won high marks year after year for its equipment reliability.SCREEN SPE USA, LLC\r\nSCREEN SPE USA (SEUS) was established in 1987 in Sunnyvale, California. SEUS is a sales, marketing, engineering and service organization responsible for operations in the US market for SCREEN Holdings Co., Ltd, Kyoto, Japan. SEUS now has 8 major local offices in the US to better serve our customers.\r\n\r\nSCREEN Semiconductor Solutions, Co., Ltd is a manufacturer of semiconductor equipment for the lithography coat/develop and wet cleaning/etching processes. SCREEN is well known in the industry for manufacturing the most reliable equipment used in the production of semiconductor wafers and has won high marks year after year for its equipment reliability.

Job DescriptionNow Hiring ISO 17025 FCC - CE - EMC Regulatory Compliance RF Test Engineers TIC Industry aka. Testing, Inspection, FCC-CE Certification of Wireless & Connected Devices Full or Part Time, Full Time or Retired Test Engineers Welcome. Previous experience working as a Regulatory Test Engineer in RF a required! RF Testing, Radiated, Conducted Emissions & Immunity EMC/EMI experience. We test electronic devices to FCC CE ISED test standards. Some of these Test Standards should be familiar to you Test StandardsEN 300 328,EN 300 330EN 300 489-17EN 55032EN 55035FCC CFR Parts 2, 15, 22, 24, 27, 80, 87, 90FCC CFR MM Wave Advanced manufacturing & emerging tech innovation is making the Arizona market one of the big winners of technology growth. A great quality of life, with a great smaller business where your voice gets heard. Be part of a team / our company family. Come help us grow & shape our exciting future! Seeking candidates who want a long-term home & want to make an impact to a growing business. Special skills: Competent using Spectrum Analyzers, Network Analyzers, Signal Generators, Vector Network Analyzer, and other lab equipment. Who We Are: Established in 1963, CT is Arizona's oldest, largest & fastest growing regulatory test lab. We are accredited to test for the FCC, Canada, European Commission, Canada, the UK & more to ensure products adhere to regulatory standards required before products can be marketed or sold in those countries. While we provide a wide variety of services and hold a broad accreditation scope of testing, LTE/4G/5G/ LORA / Radar/ Sat Com/ WiFi / Blue Tooth / cellular, GPS are our largest areas of growth due to products like IoT, IIoT, sensors, Radar, Telecom, MedTech, Robotics & Wearable Devices. As a 60 year old mid sized lab with employees around the world. This position would be onsite in Arizona, just east of Phoenix. We collaborate with our team, to build a great team/family and culture. Monthly opportunity meetings where the entire organization brainstorms how we get better, our culture committee & our values, our training & education, the fact we were founded by an engineer, and most importantly. . . OUR PEOPLE make CT the place where you not only want to grown in a career but also enjoy spending your time, knowing privately-held leadership has your best interests in mind loves getting input and feedback. Role of Regulatory Compliance Radio Frequency (RF/Wireless) Test Engineer Be a key member of the RF SME test team with lots of opportunity for growth and promotion in your career path. Work closely with Lab Manager & Lab Supervisor, and support Technical Sales Team. Key Value Added Contributions Include: • Strong experience performing testing to regulatory standards on a wide variety of devices; understanding of regulatory standards. Competent and accurate in your testing, project management, communications, sales support, reporting and interacting with the team., • Support Technical Sales Team in validating test standards & collaborating to generate test plans, estimate project hours., • Help support & participate in ongoing quarterly tech trainings., • Help prepare internal & external projects and oversee the projects., • Interest in trouble shooting failing devices., • Client interactions throughout the testing process., • Good with maintaining record keeping, and test data entry on projects., • Ability to answer general questions with respect to our test scope found here: Lab Scope and Certification, • Work with management on growth strategy, hiring, training, planning, • Knowledge of FCC parts including 15b, 15c, 15e, 15.247, 22, 24, 27, 90 (and equivalent Canadian rules)., • Familiarity of FCC parts 18, 30, 73, 74 & 87 (and equivalent Canadian rules). Other rule parts a plus., • Knowledge of EU RED and EMC Directives and associated standards (especially with regards to the areas covered in the FCC rule parts above)., • Basic knowledge of industry associations such as GCF, PTCRB, CTIA, Wi-Fi Alliance, BT SIG, LoRa Alliance, etc. a plus.Requirements:, • 5+ years prior RF Testing experience at an actual Regulatory an ISO 17025 Test Lab with experience testing to the above FCC standards & ETSI, Red Directives., • Ability to legally work in the United States of America or clear path to in the next 30 to 60 days or less., • H1B & Green Card support is possible., • Ability to physically work from our headquarters based in Mesa, Arizona (Greater Phoenix-Metro)., • High detail-orientated & accuracy focused., • Professional with effective listening, communication & logic skill-sets and interaction with customers., • Tech savvy; not only in the lab but using business tools like Microsoft Office Suite, Excel, Outlook, Google Drive, Microsoft Teams, etc., • Programming Experience with TILE or Pyton is a plus, • Accountability & Integrity, Character, Ethics are most important, • Positive attitude, this is for someone who is looking for a long-term home where they enjoy the great culture & very experienced people they work with; it is a great TEAM.Compensation, Benefits and Perks:, • Salary is based on skills & fit as we are hiring for multiple roles, Salaries are competitive, • Benefits include medical , 401K, PTO, performance incentives & more. Additional Info: • 401(k), • Health insurance, • Paid time off, • Professional development assistance, • Referral program, • Relocation assistance, • Tuition reimbursementSchedule:, • Day shift, • Monday to FridaySupplemental pay types:, • Bonus payExperience: Testing Training Project Management Customer interface Work location: Mesa Arizona In person Powered by JazzHR OZhtBZrTFf

Job Description Design Engineer & Consultative Sales Engineer - Manufacturing - Not Remote Work - No Recruiters Text to apply: APPLY_DENG_25 to (480) 690-2850 The Zippertubing Company is a leader in cable bundling, wire harness, and component protection systems. We provide solutions to some of the industry’s most complex and challenging problems in the Aerospace, Medical, Space, Automotive, and Defense industries. We seek a highly motivated Design Engineer to join our Design and Technical Consultative Sales team in Chandler, AZ. This is a full-time, onsite position with no option for remote work. Full Job Description The Design Engineer contributes to the success of The Zippertubing Co. by providing innovative solutions to our customers. This position will interact directly with clients, identifying, developing, and testing products based on customer and business needs. Key responsibilities include product design, creation of prototypes, and transition of prototypes to production. This position will require knowledge of materials, creation of 3D models for products via CAD (SolidWorks preferred), and associated print drawings, tooling design, and documentation for customer and production use. Major Tasks, Accountabilities, and Key Responsibilities: • Interface with customers to identify requirements and translate them into custom solutions., • Provide technical and consultative support and effectively communicate technical information to our customers., • Work with sales and marketing teams to create a clear understanding of our engineered solutions so they can best market and sell our products., • Develop product tooling, fixtures, jigs, and manufacturing efficiency aids., • Maintain project completion status for all active projects., • Must be a U.S. citizen or permanent resident to meet ITAR employment requirements., • BS in Engineering from an ABET-accredited university is required., • 3+ years’ experience in engineering design or technical sales or consultative sales or intern experience., • Proficient in CAD, SolidWorks preferred., • Proficient in Microsoft Office Suite applications., • Effective verbal and written communication, mentoring, facilitation, and team-building skills., • Ability to give and receive constructive feedback. This role is partially sedentary; however, some filing is required. This would require the ability to lift files, open filing cabinets, and bend or stand on a step ladder as necessary during their shift. The employee must occasionally lift and/or move up to 25 pounds. The position involves sitting, talking, hearing, climbing stairs, using the elevator, and walking throughout the 8-10-hour shift. Hand-eye coordination is necessary to operate tools, drafting instruments, computers, printers, and various equipment. This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. This individual will also be responsible for all other duties assigned by the department manager or executive management. Duties, responsibilities, and activities may change at any time with or without notice. This classification for this role is exempt. Benefits • 80 hours of vacation, • 48 hours of sick time, • Paid Parental Leave, • Medical, • Dental, • Vision, • Flex Spend (Allegiance), • 401K w/match, • Full Time, in office (Chandler Blvd. and I-10 area), • Day shift, • Monday to Thursday (6:00am – 3:30pm), • Friday (6:00am - 10:00am) Direct Applicants Only: The company is handling all recruitment for this position internally. Third-party recruiters or staffing agencies are asked to refrain from contacting the company at this time. Unsolicited submissions will not be considered. For more information about Zippertubing, please visit our website: zippertubing.com • Zippertubing® requires E-Verify., • Criminal background check (Required), • English (Required), • US work authorization is a must, • Employer will not sponsor applicants for employment visa status., • Job Type: Full Time

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking a Project Sales Engineer (HVAC) for our client in the Commercial HVAC domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Permanent position, and the client is looking for someone to start immediately. Duration: Full-time Location: Tempe, AZ (Onsite) Salary: $98,400/Annually Role: Project Sales Engineer (HVAC) Primary Skills: Engineering Role Description: The Project Sales Engineer (HVAC) must have 5+ years of experience. This role is a comprehensive engineering sales position that requires a strong combination of sales expertise and knowledge of Commercial HVAC Systems. You will be responsible for driving and sustaining business in equipment repairs, upgrades, and large, complex solutions sales. The majority of your prospecting (at least 90%) will come from the existing customer base. Key Responsibilities: • Qualify prospects and opportunities within assigned accounts., • Effectively present and close sales, addressing customer objections and concerns in a timely and professional manner., • Manage and drive quotes through to closing sales., • Survey commercial HVAC systems, identify issues, and recommend solutions, while adhering to company pricing policies. Essential Duties: To perform this role successfully, you must be able to complete the following duties satisfactorily. Additional responsibilities may be assigned: • Plan and schedule appointments effectively to maximize productivity., • Conduct persuasive sales presentations, identifying opportunities within the existing customer base., • Consistently generate sales revenue through proven methods and a track record of success., • Understand customer organizations and decision-making processes, ensuring commitment to a decision timeline., • Address customer questions and objections effectively., • Identify customer needs and provide appropriate solutions., • Deliver compelling product demonstrations to prospective clients., • Communicate the value of products and solutions, including ROI., • Understand company credit policies and communicate them effectively to customers., • Survey and evaluate commercial HVAC mechanical systems, offering customers tailored solutions and identifying new project opportunities., • Work closely with the Operations Department to ensure customer needs are understood and met., • Use vertical market strategies to identify opportunities within the existing customer base., • Leverage the value proposition to engage customers and generate interest., • Assess job conditions and provide recommendations for maintenance., • Coordinate project work with subcontractors and equipment representatives to ensure smooth execution. Required Experience & Skills: • Bachelor’s degree in Engineering or a related field., • 5-7 years of sales experience in the commercial HVAC industry., • 5-7 years of hands-on experience with commercial HVAC systems., • Strong mechanical aptitude., • Solid knowledge of building codes and industry standards., • Valid driver’s license is required. Client Company Overview: We are a rapidly growing company specializing in commercial HVAC, building automation, and energy services. Our culture is rooted in a commitment to excellence and teamwork, where we prioritize delivering exceptional results for our customers. We are a family-owned business that focuses on our associates, customer dedication, and continuous improvement. Work Schedule: Monday to Friday, 8:00 AM to 5:00 PM Education: High School Experience: Minimum 5+ years of experience Relocation: This position will cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Rishabh Chaurasia Recruiter Phone: 412-787-9559 Benefits: This is a direct hire position, and the hired applicant will receive our client’s benefits package. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Ardurra is seeking a Project Civil Engineer to join our Municipal Group in Arizona! Join Ardurra and help design Arizona’s future! We’re looking for a Licensed Project Civil Engineer to join our Site/Civil team in Arizona. In this role, you’ll work on diverse projects—residential, commercial, municipal, and parks—while enjoying a collaborative culture and opportunities for growth. Locations: • Phoenix, AZ, • Mesa, AZ, • Tucson, AZ, • Flagstaff, AZ, • Prescott, AZ, • Hybrid Work Options after onboarding, • Competitive Salary & Comprehensive Benefits, • Professional Development & Career Growth, • Develop project design concepts and criteria, • Produce civil engineering plans for public and private projects, • Organize project files and records for efficient delivery, • Assist with client interface, budgets, and schedules for on-time/on-budget completion, • Recommend design alternatives and support proposal preparation, • Coordinate with design teams, clients, contractors, and permitting agencies, • Perform quantity takeoffs and cost estimates, • Analyze stormwater drainage and prepare technical reports, • Review designs using AutoCAD Civil 3D and Hydraflow, • Participate in budget and QC reviews, • Support construction administration, including RFIs and shop drawings, • Bachelor’s Degree in Civil Engineering, • Arizona PE license (or ability to obtain via reciprocity), • 5+ years of experience in site design and permitting, • Proficiency in Civil 3D, hydrology/hydraulic analysis, and pipe network analysis, • Strong communication, organizational, and problem-solving skills, • Highly self-motivated and able to work independently while collaborating as needed NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-LC

Job Description Ardurra is seeking a Civil Engineer in Training to join our team at one of our Arizona office locations! Primary Function: Under general supervision, performs assignments of limited scope which require the application of standard techniques, procedures, and criteria in carrying out a sequence of related design engineering tasks. Assignments involve some unusual or difficult problems requiring job knowledge and abilities beyond entry level. Primary Duties: • Prepares plan details and outlines, identifies quantities of materials, cost estimates and performs calculations for a specific segment of a project., • Assists in preparation of technical specifications., • Evaluates vendor bids and drawings to assure compliance with specifications., • Reviews and approves design drawings within defined limits., • Prepares technical reports or sections of larger reports., • From time to time, performs field tests & measurements, collects field data., • Bachelor’s Degree in Civil Engineering from an accredited university or college, • Engineer-in-Training certificate (any state), • Experience with Civil 3D CAD software While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-LC

Job Description Job Summary: SCREEN SPE is looking for an experienced Installation and Modification Field Service Engineer to provide support for installation, maintenance, and site support for state-of-the-art semiconductor manufacturing/processing equipment. Position is based either in Chander, Arizona or Hillsboro, Oregon. Essential Job Duties & Responsibilities: • The ideal candidate will have experience using alignment tools (micrometers/calipers/multimeters/current clamp) and the ability to read schematics/plumbing diagrams., • Utilizes Pre-Task Plans and Procedures for all work performed on a tool., • Effectively contributes to problem solving using Model Based Problem Solving methodology., • Maintains L3 certification on required tool sets., • Proactively takes action to ensure high levels of customer satisfaction. Anticipates and responds to needs of internal and external customers., • Exercise with a high level of judgment and keeps customer informed of work progress and plans., • Excellent communication, documentation, troubleshooting and customer service skills are necessary, as is proficiency in MS Office programs., • Must be able to follow detailed oral and written procedures, and to develop processes., • This position requires a minimum of 3 years’ experience working with Clean/Etch, track, and or CMP process equipment or equivalent related electromechanical equipment., • Must be able to pass customer background check and be able to pass medical test and certification/training for respirator use., • Must be able to lift 35 pounds, climb steep stairs and be able to stand for up to 4 hours., • Develops and maintains excellent working relationship with shift techs and tool owners. AAS Degree or equivalent experience Company DescriptionSCREEN SPE USA, LLC SCREEN SPE USA (SEUS) was established in 1987 in Sunnyvale, California. SEUS is a sales, marketing, engineering and service organization responsible for operations in the US market for SCREEN Holdings Co., Ltd, Kyoto, Japan. SEUS now has 8 major local offices in the US to better serve our customers. SCREEN Semiconductor Solutions, Co., Ltd is a manufacturer of semiconductor equipment for the lithography coat/develop and wet cleaning/etching processes. SCREEN is well known in the industry for manufacturing the most reliable equipment used in the production of semiconductor wafers and has won high marks year after year for its equipment reliability.SCREEN SPE USA, LLC\r\nSCREEN SPE USA (SEUS) was established in 1987 in Sunnyvale, California. SEUS is a sales, marketing, engineering and service organization responsible for operations in the US market for SCREEN Holdings Co., Ltd, Kyoto, Japan. SEUS now has 8 major local offices in the US to better serve our customers.\r\n\r\nSCREEN Semiconductor Solutions, Co., Ltd is a manufacturer of semiconductor equipment for the lithography coat/develop and wet cleaning/etching processes. SCREEN is well known in the industry for manufacturing the most reliable equipment used in the production of semiconductor wafers and has won high marks year after year for its equipment reliability.

Job Description Ardurra is seeking a Construction Observation Inspector to join our staff in Arizona! This position is open to both part-time and full-time opportunities. Primary Function In this role, the Construction Inspector will observe and inspect various construction sites. Primary Duties Construction observation and inspection duties include, but are not limited to: • Visit construction sites to monitor activities, • Observing compliance to all safety protocols, • Arranging and reviewing material testing results, • Determining and documenting quantity of work completed and materials used, • Assist in preparing pay estimates and change orders for construction contracts, • Track project budgets and contract amendments, • Participate in project meetings to plan and review project progress, • Investigating complaints, • Confer with contractors and the general public to resolve problems with inspections, • Interpret surveying documents; reading plans, maps or graphic instructions, • Communicate projects status and issues to management in a timely manner, • Ensures compliance with jurisdiction specifications and details, • Arizona Department of Transportation (ADOT) Standard Specifications for Road and Bridge Construction, • Maricopa Association of Governments (MAG) standard specifications and details for public works construction, including, but not limited to: earthwork; sanitary sewers and water lines; irrigation pipes; storm drains; streetlights; electric, telephone, and dry utility trenches; paving and concrete flatwork; and bridges and structures, etc, • May coordinate-survey requests and staking, • Monitor trenching for alignment and grade, shoring, and manhole locations and compactionCheck pipes, valves, and fire hydrants for proper location, type, and operations, • Monitor conflicts with other utilities, • Inspect the full range of public works construction projects, which includes streets, alleys, water and sewer lines, irrigation facilities, storm drains, and permit construction in the public right-of-way, for compliance with standard details, specifications, and approved plans, • Inspects materials, grades, and other work for compliance with standard and special specifications, details, plans, and standard construction practices, • Complete daily and monthly progress reports and assists in preparing monthly and final pay estimates, • Compute monthly estimates of work completed and recommends payment for contractors, • Monitor the Quality Assurance Plan and calls for testing as required, • Review progress of projects being inspected for the city by others and assists them in coordinating work, • Train other construction inspectors as needed, • Inspect traffic control barricade set-ups including street, sidewalk or alley restrictions in accordance with City of Phoenix Traffic Barricade Manual including any ADA requirements, • May coordinate with utilities, other departments, contractors, and sub-contractors, • Review quantities based on plans and specifications prior to construction, • Work with survey personnel in preparing record drawings, • Observe and ensures that materials are in accordance with and used in accordance with standard details specifications, approved plans and normal construction practices, • Records all field changes for "as-built" drawings on field plan set or assures the contractor and/or architect/engineer are recording changes, • Handle property owners complaints and inquiries as to construction activities, • Call for survey support as required by construction progress, • Maintain regular and reliable attendance, • Inspect trench backfill, sub-grade and aggregate base course for grade, compaction, moisture, and preparation for paving, • Attend and participates in preconstruction meetings with department staff, engineers, contractors, developers and other organizations, • Ability to use Microsoft Office Programs, Word, Excel, Outlook, • Represents Ardurra in the construction inspection role in a manner that demonstrates respect for others, integrity, and a high degree of professionalism, • High school diploma or GED equivalency, • 4+ years’ experience in public works construction inspection work or related field, • Valid Arizona Driver’s License with acceptable driving record, • Any equivalent combination of experience and training which provides the knowledge and abilities necessary to perform the work, • Strong work ethic, • Discipline to be on time, all the time, and meet client deliverables, • Strong verbal communication skills enabling efficient work between clients and contractors, • Written communication skills necessary to write and edit routine reports, • America Concrete Inspection (ACI) Certification Field Testing, • America Public Works Association (APWA) Certification, • American Traffic Safety Services Association (ATSSA) Certification, • Traffic Control Technician (TCT), • Traffic Control Supervisor (TCS), • Pavement Marking Technician (PMT), • Guardrail Installer (GI), • Arizona Technical Testing Institute (ATTI) Field Technician Certification, • International Code Council (ICC) Certification, • International Municipal Signal Association (IMSA) Certification, • Roadway Lighting, • Signs and Pavement Markings, • Traffic Signals, • Traffic Signal Inspector, • Work Zone Traffic Control Safety, • National Institute for Certification in Engineering Technologies (NICET) Certification, • Certification for Materials, Asphalt, Concrete, Soils and Highway Construction While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-LC

Job DescriptionJob Description We are looking for a primary owner of the Gan Discrete Product strategy for Sever/AI power infrastructure applications and markets. Be the product owner throughout the product lifecycle, assuming full responsibility for its success and performance. Responsibilities: • Lead product and roadmap definition by collating inputs from field, customer and other resources in the market. Collaborate with the applications team to define product requirements based on customer and market needs, • Primary interface to Sales, FAE , Regional and Solution Marketing teams for coordinating product technical and non-technical support., • Act as the main liason between field teams and the development team. Be the primary VOC as part of the development process., • Responsible for driving product promotion activities, providing information on product roadmaps, identifying and closing new design-in opportunities, as well as Sales/FAE trainings, • Developing business cases for new product and technology projects and presenting them to senior management., • Drive development of approved projects in partnership with project manager and represent VOC throughout the development process. • Bachelor's degree Electrical Engineering or equivalent in a similar field, • 10+ years of work experience in the power semiconductor industry, Ideally in customer facing roles such as Marketing Engineer, Applications Engineer, Systems Engineer, Field Applications Engineer etc., • Experience with Power discrete product (MOSFETs, IGBTs, SiC) is required. Experience with GaN technology is a plus. Solid understanding of power conversion applications., • Prior experience working with AI/Server Infrastructure customers and understanding of server/AI infrastructure power system architecture., • Proven track record of working in a customer interfacing role, dealing with worldwide sales and marketing teams., • Thorough understanding of semiconductor product development and manufacturing processes is highly desirable., • Proactive self-starter with an ownership mindset., • Strong communication and presentation skills, • Ability to work effectively in a cross-cultural environment as part of a diverse international team., • Willingness to travel occasionally, both domestically and internationally., • Candidate can be located in Tempe, Arizona or Dallas, TX Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose ‘To Make Our Lives Easier.’ As the industry’s leading expert in embedded processing with unmatched quality and system-level know-how, we have evolved to provide scalable and comprehensive semiconductor solutions for automotive, industrial, infrastructure, and IoT industries based on the broadest product portfolio, including High Performance Computing, Embedded Processing, Analog & Connectivity, and Power. With a diverse team of over 22,000 professionals in more than 30 countries, we continue to expand our boundaries to offer enhanced user experiences through digitalization and usher into a new era of innovation. We design and develop sustainable, power-efficient solutions today that help people and communities thrive tomorrow, ‘To Make Our Lives Easier.’ At Renesas, you can: • Launch and advance your career in technical and business roles across four Product Groups and various corporate functions. You will have the opportunities to explore our hardware and software capabilities and try new things., • Make a real impact by developing innovative products and solutions to meet our global customers' evolving needs and help make people’s lives easier, safe and secure. Join Renesas. Shape Your Future with Us. Renesas Electronics is an equal opportunity and affirmative action employer, committed to celebrating diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by federal, state or local law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas. We have adopted a hybrid model that gives employees the ability to work remotely two days a week while ensuring that we come together as a team in the office the rest of the time. The designated in-office days are Tuesday through Thursday for innovation, collaboration and continuous learning.

Who We Are Applied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips – the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world – like AI and IoT. If you want to push the boundaries of materials science and engineering to create next generation technology, join us to deliver material innovation that changes the world. What We Offer Salary: $31.00 - $42.35 Location: Chandler,AZ You’ll benefit from a supportive work culture that encourages you to learn, develop, and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible—while learning every day in a supportive leading global company. Visit our Careers website to learn more. At Applied Materials, we care about the health and wellbeing of our employees. We’re committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our ___. As a Field Service Engineer [Customer Engineer] at Applied Materials, you serve as the direct liaison with customers, collaborating closely to install, maintain, and upgrade equipment. You'll use digital analytics for troubleshooting and apply basic diagnostic techniques to assess and address technical issues. Your responsibilities include performing preventative and corrective maintenance on various systems such as electrical, vacuum, mechanical, plasma, hydraulic, and gas systems. Additionally, you'll coordinate and communicate directly with customers to ensure smooth operations and exceptional service. Future Opportunity - Please submit your application to be considered for open position in the near future. What You’ll Do As a Field Service Engineer [Customer Engineer], you'll serve as Applied’s direct liaison with our customers and quickly solve high-value problems on their behalf. By collaborating closely with our customers onsite to install, maintain, and upgrade Applied Materials equipment, and with our internal teams to improve business processes, you’ll make a significant impact on ensuring peak performance and deliver exceptional service, while becoming an integral part of Applied Materials' diverse and dynamic field team. Role Responsibilities: • Collaborate with Senior Field Service Engineers [Customer Engineers] in installing, maintaining, and upgrading customer equipment, • Use digital analytics for troubleshooting, • Apply basic diagnostic techniques to assess equipment and address technical issues, with guidance from Senior Field Service Engineers [Customer Engineers], • Perform preventative and corrective maintenance on electrical, vacuum, mechanical, plasma, hydraulic, and gas systems (training provided), • Coordinate and communicate directly with customers, • Fulfill additional duties, as assigned Minimum Qualifications: • Completion of an Associate degree, military technical training, field service experience, or trade certification, • 1–2 years of work experience in customer/field service support, or a related technical field, • Ability to read and interpret electrical and mechanical schematics, • Experience diagnosing and resolving basic technical challenges, • Basic mechanical aptitude with pneumatics, hydraulics, electronics, vacuum, or thermodynamics, • Familiarity with hand tools and their appropriate usage, including digital multimeters, • Effective written and verbal communication skills, • Basic knowledge of Microsoft Excel, Word, and PowerPoint, • Possession of a valid driver’s license and the ability to obtain a passport, if travel is required, • Able to meet all on-site requirements, including safety, environmental guidelines, and COVID-19 protocols Preferred Qualifications: • 2–4 years of work experience in customer/field service support, or a related technical field Physical Requirements: This position often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, working at height, lifting up to 35 lbs., the ability to distinguish between colors and working with electricity, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields. #LI Additional Information Time Type: Full time Employee Type: Assignee / Regular Travel: Yes, 20% of the Time Relocation Eligible: No The salary offered to a selected candidate will be based on multiple factors including location, hire grade, job-related knowledge, skills, experience, and with consideration of internal equity of our current team members. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation such as participation in a bonus and a stock award program, as applicable. For all sales roles, the posted salary range is the Target Total Cash (TTC) range for the role, which is the sum of base salary and target bonus amount at 100% goal achievement. Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law. In addition, Applied endeavors to make our ___ accessible to all users. If you would like to contact us regarding accessibility of our website or need assistance completing the application process, please contact us via e-mail at , or by calling our HR Direct Help Line at 877-612-7547, option 1, and following the prompts to speak to an HR Advisor. This contact is for accommodation requests only and cannot be used to inquire about the status of applications.

Sales Engineer. Job location Chandler, AZ. Send resume w/this ad to Job Code 277-SE, HR Department, DISCO HI TEC AMERICA, Inc., 5921 Optical Court, San Jose, CA 95138. Telecommuting is available. Domestic travel 10% of the time to San Francisco, San Diego, Dallas, and Austin. International travel to South Korea and Japan 4% of the time. #LI-DNI

Applications Engineer Monday - Friday 7AM-3:30PM Customer and Technical product focus SUMMARY: The Applications/Product Support Engineer is responsible for providing technical and non-technical sales assistance to customers and representatives in their assigned region. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Handle incoming calls of a primarily technical nature from the customer and representative, primarily for standard product application assistance. This includes, but is not limited to, commercial items such as commission issues, order status, and expedites., • Generate standard product quotations for the representative and customer as well as any follow-up associated technical support., • Be proficient in order entry and review incoming standard product orders for technical accuracy., • Be familiar with and promote all company products., • Understand CRM package functionality and utilize to track and close opportunities., • Follow-up on quotes within assigned region and communicate with market managers to close business., • Work with other departments as necessary to facilitate exceptional customer service., • Other duties may be assigned.