Sales engineer jobs in San Antonio, TexasCreate job alerts

Job Description Position: CHIEF ENGINEER Reports to: General Manager Division: Admin & General Department: Props Ops & Maintenance Classification: Exempt SUMMARY: The Chief Engineer is responsible for managing all aspects of maintenance staff on a daily basis. Directs, coordinates and performs routine, preventive and emergency interior / exterior maintenance and repairs to obtain optimum efficiency and economy of hotel operations. Directs the Engineering staff, accounting/budgeting, asset protection, inventory control and human resources. GENERAL RESPONSIBILITIES: • Provide the highest quality of service to the guest at all times., • Report work completed daily to supervisor., • Respond in a courteous manner to guest questions, complaints and/or requests., • Maintain guest privacy by ensuring Key Control Policy is utilized and ensure no room numbers and/or guest names are given out without proper identification., • Responsible for troubleshooting, initiating repairs, identifying malfunctions in mechanical or electrical systems such as HVAC, plumbing, and other equipment throughout the hotels., • Ensures that we Maintain all brand and franchise standards and follow-up on inspection deficiencies., • Ensures that hotel has Current Certificates of Insurance., • Ensures that all new service contracts are approved by Corporate Office / Ownership before signing anything., • Ensures that all outside contractors supply “current” Certificates of Insurance liability with $2M in coverage., • Ensures that Engineering Department support all Risk Management initiatives and guidelines for fire and safety regarding Engineering including the proper storage of chemicals, paints and etc.,, • Ensures that Quality Standards and Service are maintained for Property, Product, and People., • Communicates daily with other management, and department heads and employees., • Participates in the development of annual capital budgets for the hotel regarding property, equipment and building repairs and replacement requirements., • Coordinates conducting the departmental operational audits and assists in developing corrective action plans., • Maintain the physical appearance and operational efficiency of the hotel including physical. mechanical, electrical, plumbing etc., • Installation & maintenance of all equipment related to HVAC, DG Sets, Water treatment, Fire Safety, etc., • Ensure proper records are kept relating to all plant and equipment for the hotel including repair and service records., • Attend all Facility Management/Property meetings as required, passing on necessary information to the maintenance team in regular junior staff meetings., • Perform daily and weekly property document inspections., • Establish and maintain department equipment and supply inventory levels appropriate to property requirements., • Responsible for quality service, meeting/exceeding financial goals, short and long-term planning and day-to-day operations., • Other duties as assigned, of which the associate is capable of performing. MAINTENANCE RESPONSIBILITIES: • Familiar and complies with the hotels mission and standards in performing maintenance activities., • Maximise maintenance team potential with a balanced focus on operations, guests, employee and owners satisfaction., • Oversee the maintenance tasks, work orders and special projects ensuring timely and accurate completion., • Respond to guest's maintenance needs promptly and ensure guests receive professional, efficient prompt and courteous service to hotel standards., • Ensure the proper use and periodic maintenance of all equipment., • Respond to all maintenance work orders in a timely manner. Repair and maintain furniture and fixtures within the hotel., • May perform preventative maintenance and repairs in accordance with property standards., • May perform general maintenance on property grounds., • Ensures that hotel swimming pool have established procedures for pool maintenance, safety and health and sanitation procedures, including proper chemicals handling and application procedures, cleaning filters, completing maintenance request forms and record logs., • Ensures that hotel Landscape Maintenance programs for the building exterior and curb appeal for snow removal, lawn care, painting, and other gardening are meeting all standards. LEADERSHIP & MANAGEMENT OF STAFF: • Prioritise, plan, schedule, assign and supervise the engineering department staff., • Provide training to staff on supplies, inventory, maintenance and ordering procedures., • Train engineering department staff on correct maintenance procedures and assists in repairs as needed., • Ensure maintenance staff is wearing proper uniforms with name tag and upholds hotels grooming and hygiene standards., • Must be thoroughly familiar with Employee Handbook and all policies and rules it contains., • Must adhere to all work rules, procedures, and policies established by the company, including, but not limited to, those contained in the Employee Handbook, Safety Manual, and operating guides. SAFETY & SECURITY RESPONSIBILITIES: • Take responsibility for the cleanliness and safety aspects of all plant and mechanical equipment rooms., • Ensure property, grounds, and work areas are maintained to standard and that all safety equipment and conditions are to code., • Develop, implement, and direct all emergency programs., • Have a thorough knowledge of all emergency procedures., • Practice safety standards at all times and be alert to hazardous conditions. Report or correct any hazardous conditions immediately., • Must be able to recognize potential safety hazards and security problems in the hotel and act upon each immediately., • Maintain, monitor and test hotel's emergency and security systems, features like Fire Alarm, CCTV, baggage scanners etc. QUALIFICATIONS: • Bachelors Degree – Electrical or Civil Engineering preferred., • Must have 3-5 years maintenance experience, with 2 years direct maintenance supervisory experience., • Computer Knowledge/Skills: MS Office., • Advanced knowledge of Building Management/Engineering., • Strong management skills, ability to appropriately assign or delegate work and authority to others in the accomplishment of goals., • Requires strong attention to detail, leadership skills, and the ability to effectively deal with department heads, guests, and staff members., • Excellent communication skills, both written and verbal., • Must be highly skilled in HVAC, boilers, electrical, carpentry, dry walling, painting, plumbing, roofing, and landscaping., • Must be able to troubleshoot and repair routine mechanical and electrical malfunctions in hotel systems and equipment., • Must be willing and able to be responsive to complaints about maintenance and be willing and able to “pitch in” and help co-workers with their job duties and be a team player., • Must have thorough knowledge of all operating departments including rooms, front office, housekeeping, engineering, accounting, sales, food and beverage.

Job DescriptionDescription: Position Summary: The Sales Engineer is responsible for driving growth in the Company’s share of United States government, major OEM and international customer contracts within aerospace and logistics sectors. The position requires a strong understanding of USG and international operations, effective interaction with governments’ representatives, and the ability to translate customer needs into successful solutions while assisting in the product management of core Knight Aerospace Material Handling and Ground Support Equipment products. A critical component of this role is the ability to leverage or integrate Air Transportation Subject Matter Expertise to ensure solutions are operationally relevant and technically sound, especially concerning cargo aircraft systems and logistics support. The position drives positive results relative to product management to include effective market research and analysis, roadmap development, testing/certifications, new product introduction processes. The Company's products primarily consist of systems used for the transportation of personnel and equipment in cargo aircraft, directly supporting commercial and military mission objectives. Duties and Responsibilities: 1. Business Growth:?Identify and pursue direct and indirect business opportunities through governments’ channels and strategic partnerships with major OEMs (e.g., Lockheed Martin, Boeing, Standard Aero, Airbus)., 2. Product Management. Plan, build, and implement product management processes for existing and new products to include market research, common configuration, customer/prospect engagement, product development, and a clear new product introduction process (NPI)., 3. Proposal Management:?Lead the development and submission of competitive proposals, ensuring clear articulation of solutions and compliance with relevant military specifications (MIL-SPECs).?Incorporate Air Transportation SME input to validate operational feasibility and technical accuracy of proposed solutions., 4. CRM Management:?Maintain accurate business development and sales data within the Company’s CRM system., 5. Market Research:?Conduct thorough market research and analysis of DoD logistics and aerospace requirements to support Marketing Campaigns, proposals and contract development.?Assist outside marketing consultants in developing product messaging that differentiates Knight products and services from others in the market., 6. Communicate effectively (internally and externally) the value of our products and services to the market. Utilize Air Transportation SME insights to identify key trends and emerging needs within the cargo aircraft and logistics domain., 7. Contract Strategy:?Develop and execute contract strategies, including pricing discussions, timeline management, and deliverable definition.?Leverage Air Transportation SME knowledge to ensure contract terms align with operational realities and technical requirements., 8. Contract Drafting & Compliance:?Draft and review contractual provisions, ensuring compliance with FAR and DFARS regulations., 9. Contract Negotiation:?Serve as a subject matter expert during contract negotiations, advocating for the Company’s interests while meeting client needs.?Utilize Air Transportation SME expertise to address technical and operational questions during negotiations., 10. Relationship Management:?Maintain effective communication with business partners and government clients, ensuring timely information exchange and issue resolution., 11. Opportunity Quoting:?Prepare quotes for smaller opportunities and related equipment., 12. Marketing Support:?Contribute to website and social media updates, highlighting the Company’s capabilities and achievements.?Use market research and critical data analysis to determine effective product pricing. Ensure marketing materials accurately represent the Company’s expertise in air transportation solutions, potentially with SME contribution., 13. Conference Coordination:?Coordinate travel and logistics for industry conferences and events.?Facilitate SME participation in relevant conferences and events to enhance the Company’s technical credibility., 14. Measure and optimize the buyer journey as it relates to product feature adoption and usage., 16. Works collaboratively with other managers of the company to promote good teamwork and a work environment which is productive and positive to execute the company’s goals., 17. Meticulous and precise diligence in all aspects of product planning and execution., 18. Ability to create, communicate, and execute effective product plans., 19. Excellent verbal and written communication skills. Strong presentation presence., 20. A high degree of initiative and intelligence to gather and analyze data to generate results., 21. Demonstrates ability to adapt to dynamic markets to include US and international government engagements with an appreciation of the contract and procurement process. Qualifications: 1. Bachelor’s degree in Engineering or related program., 2. 10 years+ military, aerospace, aviation experience., 3. Computer skills using Microsoft Office Suite and CRM platforms., 4. Aerospace, aeromedical, emergency management, or biomedical experience a plus., 5. Firsthand or general knowledge of cargo handling vehicles, ground support equipment, cargo aircraft and operations in the cargo aircraft, 6. Experience dealing with third party sales resources, especially international sales agents. Skills: 1. Knowledge of federal government contracting requirements and processes., 2. Familiarity with legal/licensing concepts such as Intellectual Property, Limitations of Liability, Indemnification, Warranties, etc., 3. Demonstrates negotiation skills and superior organizational skills., 4. Proven analytical and written and verbal communication skills., 5. Ability to be proactive, prioritize and maintain deadlines in a service-oriented and sales driven environment., 6. Speed and accuracy are essential requirements for this position., 7. Works well in a “team” environment., 8. Able to obtain DoD clearance. Work Environment Requirements: 1. Estimated international and domestic travel: 25%., 2. Office environment is typical for day-to-day operations.

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is seeking highly motivated Mechanical Engineers to act as customer-facing Technical Account Managers (TAMs). These TAMs will be embedded within our most strategic accounts, acting as an extension of their engineering teams. This role is a unique blend of customer engagement, technical expertise, and operational execution. TAMs will report into Operations but will work very closely with Sales to drive growth and ensure customer satisfaction. This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a highly motivated Mechanical Engineer with a passion for customer success and a desire to make a real impact this is the role for you. Responsibilities: Customer Integration: • Become a trusted advisor and technical expert for assigned enterprise accounts, • Weekly onsite visits at customer and partner locations, building relationships and understanding their needs, • Collaborate closely with customer engineers on Design for Manufacturing (DFM) to optimize projects for Xometry's platform, • Proactively identify and address potential manufacturing challenges, • As customer projects are awarded to Xometry, ensure orders are directed to the most qualified manufacturers within our network, • Conduct monthly on-site audits of manufacturing partners to ensure they meet Xometry's quality standards and customer specifications, • Manage projects to successful completion, overseeing production, and ensuring on-time delivery, • Handle critical communications, order changes, and escalations related to customer orders, • Partner with Enterprise Sales Executives to drive account growth and retention, • Identify opportunities for expanding Xometry's services within existing accounts, • Provide technical expertise and support during the sales process, • Bachelor's degree in Mechanical Engineering or a closely related field such Aerospace Engineering, Product Design/Development, or Industrial Engineering is required, • 7+ years of experience in manufacturing, product development, and project management, • Experience in the aerospace industry is highly preferred, • Strong understanding of manufacturing processes and DFM principles, particularly as they apply to CNC applications, • Experience in CNC Machining, Tube Bending, Composites, or 3D printing is preferred, • Proficiency in modelling and drafting software such as Solidworks, • Excellent communication, interpersonal, and problem-solving skills, • Experience with CRM systems such as Salesforce, • Proficiency in Google Suite and Microsoft Office Suite, • Ability to travel to customer and partner sites up to 50%, travel could be short notice and range from short day trips to multi-day drips #LI-Remote Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description Ardurra is seeking a Project Engineer to join our Public Works discipline in San Antonio, TX! Ardurra is a multidisciplinary civil engineering services firm which provides broad-based solutions tailored to the specific needs of the public and private sector. We leverage the depth of our professional and technical expertise, as well as our integrated structure, to deliver practical, innovative solutions for our clients. We have been creating opportunities for our employees to develop both personally and professionally. As a result, our team has contributed to some of the nation’s most important infrastructure projects. These are projects that can positively impact people’s lives. Primary Function The Project Engineer (Engineer IV) acts as a staff specialist in providing technical guidance for complex or unique assignments. This person will independently perform a variety of engineering tasks involving design work, research and preparation of drawings or designs, and construction administration of municipal water, wastewater, floodplain, and stormwater infrastructure. Assignments may include design of water/wastewater treatment facilities, wastewater collection systems, transmission pipelines, pump stations, and also floodplain mapping, stormwater control structures, and drainage systems. The incumbent must be capable of applying diversified knowledge of engineering principles and practices while independently making decisions on significant design engineering problems, utilizing various computer software packages and automated engineering and design tools. The position will expose the successful candidates to a full range of Public Works facility projects as well as stormwater management and drainage projects. Primary Duties • Participates in the development of project design concepts and criteria, • Makes recommendations on project staffing, • Analyzes complex design problems requiring the development of new or improved techniques or procedures, • Consults with construction personnel concerning design constructability, • May be a lead individual on a construction site for resident engineering services reviewing construction compliance with engineering design authority, review of schedules and costs and invoicing (see Construction Management family for growth in construction services), • Monitors project progress for technical accuracy and adherence to schedule and budget that they may have developed, • Prepares and finalizes planning documents, • Provides input for proposals, engaging with proposal teams and managers, • Represents respective projects at meetings and conferences, • May plan, organize, and supervise design engineering activities for a project of significant size and complexity (e.g., project requiring the integration of two or more engineering disciplines), or two or more projects of moderate size and complexity (e.g., projects involving a single engineering discipline), • Bachelor's Degree in Civil Engineering or Environmental Engineering from an ABET accredited program, • PE license in the state of Texas required or ability to obtain within 6 months, • 5+ years of engineering experience in water, wastewater, and/or floodplain/stormwater management projects, • Experience with hydrologic and hydraulic modeling software (e.g., HEC-HMS, HEC-RAS, XP-SWMM, InfoWorks) a plus, • Knowledge, experience, and ability to perform computer tasks with Bluebeam, • Candidate must be self-motivated, able to work independently and with a project team to completion of a task, • An attitude and commitment to being an active participant of our culture is a must, • Excellent written and oral communication skills, • Attention to detail, with a demonstrated capability to meet project budget and deadline, • Client Focus, • Developing Others, • Fostering Communication & Collaboration, • Leading Others, • Managerial Courage Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-KB1

Job DescriptionLocation: San Antonio, TX (On-site) Company: BE&SCO ManufacturingAbout Us BE&SCO Manufacturing is a leader in innovative equipment for the food manufacturing industry, specializing in industrial kitchen and bakery equipment. Our success comes from blending practical engineering expertise with creative thinking — and our R&D team is at the heart of that innovation. We are looking for engineers who aren’t just seeking a desk job, but tinkerers, makers, and problem solvers who are excited to invent the future of our products. Essential Duties and Responsibilities Product Innovation & Technical Leadership * Lead the design, testing, and improvement of new products, processes, and technologies within R&D. * Utilize the stage-gate process to effectively communicate with leadership. * Manage assigned R&D projects from start to finish, including objectives, milestones, and resource alignment. * Collaborate with leadership and shop teams to brainstorm, prototype, and validate new product concepts. * Apply DFM/DFA principles to ensure products are efficient, cost-effective, and manufacturable. Hands-On Prototyping & Problem Solving * Work with shop personnel to build, test, and refine prototypes. * Troubleshoot and resolve design and fit issues using knowledge of welding, machining, and fabrication. * Use CAD, 3D printing, and manual tools to experiment and iterate. Project Ownership & Cross-Functional Coordination * Act as primary point of contact for project deliverables. * Partner with Manufacturing, Sales, and Marketing to align designs with customer needs and market trends. * Support Production during first-run builds. * Communicate project updates, risks, and results to leadership. Process Development & Documentation * Create and maintain CAD drawings, BOMs, ECOs/ECNs, test reports, and SOPs. * Identify process improvements to accelerate product development. * Ensure compliance with engineering documentation standards. Existing Product Support & Continuous Improvement * Review current products for cost, performance, and manufacturability improvements. * Troubleshoot product failures, perform root-cause analysis, and recommend corrective actions. * Collaborate with Quality and Service teams to meet customer and market demands. Qualifications Required: * Bachelor’s Degree in Mechanical, Manufacturing, or related Engineering field. * 5+ years of R&D, product design, or project leadership in an industrial equipment/machinery environment. * Proficiency in 3D CAD software (Autodesk Inventor preferred). * Strong knowledge of metal fabrication and GD&T standards. * Hands-on experience with fabrication tools and equipment. * Proven ability to manage project timelines, budgets, and deliverables. Preferred: * DFM/DFA and shop floor prototyping experience. * Basic electrical knowledge (circuits, wiring, motor controls). * Familiarity with PLC programming, HMI interfaces, and certification processes (NSF, UL). Competencies * Creative Problem Solving – Develops innovative, practical solutions. * Leadership – Drives project success through coordination and accountability. * Hands-On Mindset – Comfortable working directly with shop personnel. * Collaboration – Works effectively across teams and with external vendors. * Attention to Detail – Produces accurate, production-ready documentation. * Adaptability – Shifts seamlessly between design, prototyping, and coordination. Physical Requirements * Ability to lift and move parts and tools up to 50 lbs. * Comfortable in office, shop, and production environments. * Regular exposure to fabrication tools, noise, and machinery. * Occasional travel to suppliers, customers, or trade shows. Benefits * 401(k) * 401(k) matching * Dental insurance * Health insurance * Health savings account * Life insurance * Paid time off * Vision insurance How to Apply: If you’re a hands-on engineer ready to take ownership of innovative projects, apply today and join our team at BE&SCO Manufacturing.

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position reporting to the Engineering Supervisor/Manager inside the service engineering group. The position will be the key member of the service engineering team and it is a highly technical customer facing position. Essential Duties and Responsibilities: • Perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing and maintenance of various solar inverters and battery storage technologies., • Perform as a lead on more complex field engineering assignments., • Interact with customers to explain the technical scope of projects., • Create and update field service procedures for troubleshooting and maintenance., • Provide training to Customers, Vendors, and Internal Personnel as a virtual team member of the training center., • Coordinate with R&D engineering in China for the generation of technical documents and training., • Responsible for the technical issues of a certain region based on the job assignment., • Lead the preparation of root cause reports to the customer., • Lead and track technical issues from customers/FST/PM/etc. on Airtable to visualize the process of the issues., • Analyze failures for trends requiring proactive actions and provide reports on findings., • Provide feedback to the R&D team on possible mechanical and electrical design improvements., • Advise, provide training on, and lead employees on various safety-related topics., • Perform electrical and electronic troubleshooting and testing of solar inverters and their components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed., • Perform troubleshooting to investigate solar plant issues such as battery issues, inverter faults, inverter design issues, and utility grid transients., • Work with customer SCADA engineers to set up systems communication and parameters., • Research alternative components that can be used in the field., • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer., • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar/BESS plants., • Help with the repair activities in the Service center., • Prepare and submit field reports to customers and management., • Support development of technical proposals and provide comments on the technical content and level of effort of the proposed scope of work., • Conduct site visits, experimental investigations and analyze engineering problems. Propose solutions, alternatives, and provide recommendations., • Inspects working conditions to ensure all products and activities are compliant with safety guidelines., • Weekly call with Engineers from Headquarters to review the progress of the issues resolution process., • Provide details for a monthly report. Minimum Requirements: • Must possess the ability to work with test equipment and hand tools as required., • Must possess customer service, problem-solving skills, and possess decision making and analytical skills., • Must possess effective written and verbal communication skills., • Demonstrates broad knowledge of electrical and construction site safety., • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • Must have basic knowledge of Electrical Safety Standards Education or Desired License and Certificates: • 4 years of experience in power electronics related companies as the service engineer/application engineer/R&D/Product Management or similar positions, or 2 years of experience with a Bachelor's degree or above, majoring in electrical engineering or similar majors., • Solar industry, battery industry, or power electronics experience is preferred. Competencies: • Technical problem solving/analytical skills., • Self-starter, strong initiatives, and an excellent communicator., • System and product level mindset., • Organization, detailed-oriented nature, and strong initiative., • Strong technical support focus and a service-oriented individual both with sales team and customers., • Modbus protocol knowledge is desired, but not required., • English language proficiency required., • Mandarin Chinese Proficiency desired, but not required. Travel: • 50% Work Location and Status: • Contract-to-Hire, Hybrid role based out of the San Antonio/Corpus Christi/Laredo, TX area Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base salary for this role is between $80,000 - $120,000 This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow. #LI-LV1

Job Description The Application Engineer acts as a key technical liaison between customers, the sales team, and engineering, ensuring generator systems are properly specified and integrated to meet project requirements. This role is instrumental in influencing project specifications by providing accurate technical information and serving as a trusted resource for the consulting engineering community throughout the territory to promote Caterpillar equipment standards. Essential Responsibilities: • Collaborate with sales teams and customers to define technical requirements and recommend customized generator solutions, • Interpret specifications, load requirements, and site conditions to select and size generator systems, including auxiliary components, • Develop technical documentation, including drawings and submittals, to support proposals and project execution, • Coordinate with internal teams (engineering, production, and service) to ensure correct configuration and successful project delivery, • Provide technical expertise and application support to the sales team and customers, including onsite presentations and consultations, • Assist with troubleshooting and resolving complex integration and application issues, • Stay informed on relevant codes and standards (e.g., NFPA, NEC), as well as emerging technologies in power generation, • Support special projects as assigned by the EP Sales Manager, • Adhere to all safety policies and procedures; maintain compliance with company standards, • Perform other duties as assigned Qualifications & Skills: • Deep understanding of power generation principles and application engineering best practices, • Proficiency in sizing and specifying generator systems, including ATS, switchgear, and control systems, • Strong working knowledge of Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Access), • Familiarity with federal, state, and local regulations, including emissions and fire protection standards, • Excellent business acumen, with a high level of accuracy and attention to detail, • Knowledge of HOLT CAT Commercial Engine Sales operations and Dealer Business System (DBS) is a plus, • Strong communication and interpersonal skills, including technical writing and presentations, • Proven critical thinking and problem-solving abilities, • Strong organizational skills and the ability to manage multiple projects simultaneously under tight deadlines, • Ability to provide value-driven consultation and influence technical project specifications, • Resilient under pressure, with a professional and collaborative demeanor, • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field, • 2+ years of experience in an application, systems, or sales engineering role—preferably within power generation or related industries None Travel: • Travel up to 45%, and some overnight travel may be required, • This position involves extended periods in a stationary position; additionally, occasional movement inside the office to access office machinery, file cabinets, etc., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines Work Environment: • This job is generally performed in a professional office environment, • Occasionally works outdoors and may be exposed to weather extremes conditions that include inclement weather, heat, cold, and humidity Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT

Job Description Our client is looking for an experienced Civil Engineer and Project Manager with 10+ years of experience in planning, design, and project management on water and wastewater and municipal infrastructure projects, focusing on utility design and municipal water/wastewater projects. Recent and ongoing projects include water and wastewater pipelines, lift stations, water modeling, City Engineering services including development plan and plat reviews, capital planning, drainage analysis, roadway, and storm drainage design. Primary responsibilities for this position include: • Working with junior staff and assisting in the direction of other technical staff to produce quality designs and plans, • Performing civil engineering planning and analysis, detailing, and plan set production Requirements: • Bachelor's Degree in Civil Engineering, • Texas PE license or the ability to obtain a Texas PE license within 6 months of hire, • 10-15 years of experience in municipal infrastructure including water and wastewater, roadway and drainage project planning, detailed design, and construction administration, • 3 or more years of experience in project management and client service, including successful budget and schedule controls, • 3 or more years of experience in managing and mentoring junior staff, • Experience in MicroStation and/or AutoCAD, • Ability to work independently at times and as part of a multidisciplinary team at others, • The ideal candidate would possess specific experience performing work in small and medium-size towns or Municipal Utility Districts with experience giving Council/Board presentations., • Experience with writing Statements of Qualifications and sales activitiesthe offer: They provide opportunities in the fields of transportation, water, wastewater, transportation, stormwater, and planning., • Opportunity to succeed in your career, • A competitive salary, • A broad benefits package including medical, prescription, dental, vision, company-paid life insurance, and long-term and short-term disability insurance, • 401(k) retirement plan with employer match

Job Description The Application and Installation Engineer supports the design, development, and implementation of CAT Power Systems products and related equipment by reviewing designs and installations for operational reliability, compliance, and quality. It provides technical and engineering support throughout the sales cycle, including troubleshooting engines, generators, and related components. The position also collaborates with vendors, customers, and internal teams to enhance product performance and ensure regulatory compliance. The incumbent in this position is expected to model the following practices daily: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission., • Reviews project specs, vendor submittals, and system designs to ensure compliance with customer requirements, CAT A&I guidelines, and quality standards., • Acts as a liaison between internal teams, vendors, and clients, ensuring clear communication and collaboration., • Identifies project risks and develops mitigation strategies to minimize exposure and maintain compliance., • Provides technical support during site evaluations, installation, testing, and validation., • Maintains project documentation, including technical specifications, reports, and design reviews., • Identifies process improvement opportunities to enhance project management efficiency., • Supports customers and stakeholders with technical resources, guidance, and troubleshooting., • Travels to customer sites as needed for inspections, testing, audits, and compliance checks., • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards., • Strong knowledge of mechanical, electrical, and engineering principles., • Ability to read and interpret technical documents, schematics, and industry regulations., • Proficiency in MS Office and data visualization tools for reporting and project updates., • Excellent problem-solving, organizational, and time-management skills., • Strong communication, customer service, and relationship-building abilities., • Ability to work independently, manage multiple projects, and collaborate across teams., • Strategic thinker with a proactive approach to improving processes., • Advanced skills required in problem solving, planning, organization, time management and analysis., • Bachelor’s degree in engineering or related field of study required, or 4 years of experience with CAT Power Systems Products., • Experience with CAT Power Systems Products preferred., • Up to 30%, overnight travel required., • To perform this job successfully, an individual must be able to perform each job duty and responsibility satisfactorily; Reasonable accommodations may be made to enable individuals with disabilities to perform job duties and responsibilities., • This position involves extended periods in a stationary position, standing, and walking; additionally, occasional kneeling, crouching, and stooping., • This role frequently communicates with others, must be able to exchange accurate information in these situations., • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina., • Occasionally moves materials or equipment weighing up to 50 lbs., • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work., • This job is generally performed in a professional office environment, in environmentally controlled conditions and outdoor conditions on jobsite., • Occasionally works outdoors and may be exposed to weather extremes conditions that include inclement weather, heat, cold, and humidity. Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT

Job DescriptionSalary: Purpose The Project Engineer will support existing and new products with project management and development. This will include product management, prototyping, testing, and marketing associated with products. Responsibilities • Manage and execute product development projects from ideation to market launch, • Lead project management activities on assigned projects including schedule, budget, work products and deliverables, • Execute projects following design control practices and developing the necessary project inputs and outputs required for each development phase, • Organize appropriate methods of communication between project stakeholders, • Collect, organize, and communicate customer and market feedback to identify critical product characteristics, • Develop scalable and repeatable manufacturing processes for new products in collaboration with the Quality Assurance (QA) and Operations departments, • Author and revise standard operating procedures (SOP) according to FDA, AATB, and other regulations if applicable, • Review, analyze, and characterize critical financial characteristics of products including COGS, • Conduct group trainings for new processes and complete technology transfer of new products, • Perform processing of human tissue as part of the development of new processes, • Design and execute scientific experiments for product development projects. Complete data collection, evaluation, and interpretation of results to generate statistically significant data to support project decisions and/or product launch, • Specify, order, evaluate, and onboard new proprietary equipment in support of products, • Execute and plan new company initiatives including equipment onboarding, supply chain management, distribution capability, and product support, • Design and develop custom manufacturing equipment if applicable, • Support and expand existing product lines by responding to business development needs, collecting, and organizing product feedback, and improving and supporting products, • Support the development and implementation of sales material for products and work with Quality Assurance to ensure all claims are appropriate for market and regulatory position, • Conduct literature reviews to support new and existing products, • Assist with investigation of product quality events and appropriate preventative/corrective actions, • Support regulatory and reimbursement submissions for products, • Develop and execute validation protocols in accordance with regulatory requirements. Review validation data and draft validation reports, • Identify and develop a working knowledge of ASTM, AAMI, ISO, and other necessary validation or testing guidance's required for assigned product development projects, • Maintain a working knowledge of FDA 21 CFR 1271, FDA 21 CFR 820, AATB standards, ISO Standards, cGMP/CGTP, other relevant regulations/standards, and internal organizational policies and standard operating procedures, • Perform other duties as assigned, • Maintain acceptable attendance and punctuality for scheduled work hours and meetings, • Ensure completion of assigned tasks and responsibilities within defined timeframes, • Flexibility to work outside of normal business hours during weekdays or weekends with reasonable advance notice, to support business/operational needs when necessary, • Project Management experience, • Ability to present complex ideas, • Technical writing ability, • Knowledge of manufacturing environment and validation procedures, • Strong analytical and creative thinking skills, • Ability to work in a fast-paced environment, • Ability to work independently and in a team environment, • Proficient in Microsoft Office, • Bachelor's degree in biomedical or mechanical engineering or related field required, • 3 years of experience in project management required, • Experience with Mechanical Design, • Experience with CAD Software, • Education in Engineering, or Biological Science or related field preferred, • Product Development and exposure to medical products preferred, • Experience with allografts and/or medical devices preferred, • Clearance of favorable background investigation required

Job Description Company Description: Eagle Automation is a premier oil and gas automation and measurement provider. At Eagle we strive to provide a complete solution to meet all our customers' automation, measurement, and electrical needs. Founded in 2000, Eagle has rapidly grown to seven locations, spanning from Texas to Wyoming. The deep talent of our team combines technical expertise with a wide variety of product and services to solve some of our customers' largest challenges. At Eagle we are looking for dedicated employees. We pride ourselves on being a safe, ethical, and customer focused organization. We work with our employees to help them achieve their professional goals by providing them with challenging and meaningful work in an environment where they will continuously learn. We are a rapidly growing organization with endless potential for career growth. Position: Eagle Automation has an opening for an Applications Engineer based out of San Antonio, TX. Your immediate duties include, but are not limited to: supporting the sales team as technical resource, designing control panels, building BOM's, design different mechanical and solar power assemblies, engineering power supply systems, interact with customers and help design and build solutions specific to their needs, assist operations team with service calls, quotes and proposals, work with vendors on new products as they develop, and provide overall technical support to Eagle staff and customers. Other duties may be assigned, as needed. Additional Duties and Responsibilities: -Review customer technical needs and assist in developing specific product/services solutions to meet those needs. -Estimate project costs -Field visits on an as-needed basis -Consult with the sales team on routine technical matters, ensuring that proposed solutions can be integrated within Eagle capabilities, or propose alternative options -May assist or solely perform sales presentations to existing/prospective customers on Eagle Solutions -Conduct customer or Eagle staff training on Eagle solution offerings Experience: • At least 5 years of O&G experience in measurement, automation and/or electrical field., • Schneider Electric product experience preferred., • Flow meter and general instrumentation experience required., • Knowledge of reading electrical and structural P&ID's required., • Degree in Industrial, Electrical or Mechanical Engineering/Maintenance or equivalent experience preferred., • Microsoft Office experience required (Excel, Outlook, Teams, Word, PowerPoint)., • Computer Automated Drafting (CAD) experience preferred., • NetSuite experience is preferred. Training: Eagle Automation provides ongoing hands-on equipment training and personal development plans. Travel: -Travel < 50% -Travel with sales team for customer visits -Travel to field offices on a biannual basis: Midland, Carlsbad, Fort Worth, Greeley, Rifle, & Farmington Job Posted by ApplicantPro

Job Description Ardurra is seeking a passionate and experienced Structural Project Engineer to join our integrated team of engineers and surveyors in either our Corpus Christi or San Antonio office. Primary Function: As a member of our structural engineering team, your responsibilities will include design, planning, and management of a broad range of projects and help grow our Texas-based structural design team. You will perform analysis on all design phases, structural modeling, structural calculations, and aid in managing design staff to develop high quality deliverables to clients. This is an excellent career opportunity for an enthusiastic and talented individual to work with outstanding professionals. By working for an engineering consulting firm such as Ardurra, you will be joining a high performing, fast paced, multi-disciplinary design team, and you will impact projects at each stage of design and across Ardurra’s nine market sectors. You will have the opportunity to work on a wide variety of projects including water & wastewater treatment plants, industrial/petrochemical plants, commercial buildings, marine structures, bridges, earth retaining structures, structural evaluations, and specialty structures. Primary Duties: • Develop, perform, and manage structural design of projects including steel, timber, masonry, reinforced concrete, and prestressed/post-tensioned concrete., • Work with design teams across regions and disciplines to generate detailed design documents including drawings, specifications, instructions, and related documents., • Evaluate the needs for design changes and make appropriate recommendations., • Ensure production of design documents and analyses meet scope, schedule, cost, and quality requirements., • Prepare technical reports and sections of proposals as requested., • Review vendor drawings for major components., • May plan, schedule, coordinate, and manage the work of lower-level engineers who assist with projects., • Conduct site visits as necessary to verify that the installation and materials of construction meet or exceed that required by the current sealed construction documents., • Review requests for information (RFI’s) and contractor submittals., • Bachelor’s degree in civil/structural engineering from an ABET accredited university is required, • Master’s degree in civil/structural Engineering would be a plus but is not required., • Minimum of 5 years of structural engineering design experience related to project types mentioned above., • Professional Engineering (PE) License in Texas, will be required (if you have a current EIT, you must be able to obtain your PE license within the first year of hire., • Passing of Structural Engineering (SE) exam is a huge plus., • Experience coordinating engineering work and interfacing with other disciplines and clients., • Experience using structural software such as RISA-3D, Enercalc, and/or STAAD., • Should have proficient knowledge of IBC, ASCE-7 and multiple ACI, AWWA, AISC, NDS, and AASHTO design specifications and standards., • Solid verbal and written communication skills required., • Ability to work and thrive in a team environment., • Successful experience in managing projects independently Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-KB1

Job Description EControls is a global provider of innovative, state-of-the-art integrated controls solutions for internal combustion engines and electric drive systems in the off-highway, on-highway, and stationary equipment markets. EControls designs world-class, full-authority engine management systems for major OEMs around the world. Our global engine development labs and engineering staff offer full-range support, from design guidance for base engine conversion to hardware, software, and engine calibration to meet each application's specific requirements. We are passionate about customer satisfaction and service. We fearlessly engage in any effort that will eliminate our customers’ risk and clear a path to their success. We immerse ourselves in our customers’ world, reveal unknowns and deliver integrated solutions. We are looking for an experinced Senior Mechanical Engineer to join our growing R&D Team. Thie candidates needs to have 10+ years of mechanical design engineering experince. Responsibilities Responsible for being the Technical Lead for new product development of mechanical and electro-mechanical products, which includes driving and supporting the team through our phase gate product development process. Lead design analysis (FEA, CFD), design reviews, DFMEAs, PFMEAs, and DFM reviews. Act as product expert, working closely with internal cross functional team (supply chain, manufacturing engineering, sales, and quality) to develop new and support existing products. Interact externally with both customers and suppliers on technical topics. Work closely with Program Manager to estimate product cost and development timeline. Develop and write design validation test specifications, working closely with the test lab to make sure products are properly validated. Mentor and train junior engineers and drafters to assist in developing a strong, consistent engineering organization. Education & Experience • Minimum of ten (10) years of relevant experience, • Bachelor’s degree in Mechanical Engineering or related field, • Proficient in 3D mechanical design (SolidWorks preferred), • Proficient in one or more analysis tools (FEA, CFD, Tolerance stack), • Excellent oral and written communication skills, • Attention to detail, • Understand and apply GD&T standards, • Ability to work in a fast-paced and challenging environment, • Injection molding/die casting processes and design practices, • Seal design EControls and FW Murphy Production Controls provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, EControls and FW Murphy Production Controls comply with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. Powered by JazzHR P4wI3DDvSP

Job DescriptionSalary: Purpose The Associate Project Engineer will support the medical device team with the management and development of new and existing products. This will include product development, assembly, testing, and marketing as well as equipment management associated with products. Responsibilities • Support the development of new products in collaboration with the project team, Quality Assurance and Operations departments, • Develop scalable and repeatable manufacturing processes for new products in collaboration with the Quality Assurance (QA) and Operations departments, • Author and revise standard operating procedures (SOP) according to FDA, and other regulations if applicable, • Perform CAD design, prototyping, and assembly as part of the development of new products and processes, • Support the development and implementation of sales material for products and collaborate with QA/RA to ensure all claims are appropriate for market and regulatory position, • Design and execute scientific experiments for product development projects. Complete data collection, evaluation, and interpretation of results to generate statistically significant data to support project decisions and/or product launch. Experimentation may extend to in-vitro or in-vivo assays conducted in-house or externally sourced, • Communicate and negotiate with new or existing vendors to source and implement testing, equipment, supplies, materials, or other resources to support research project activities, • Assist the Operations department in the maintenance, assembly, installation, or implementation of new equipment or process specific tooling, • Design, order, evaluate, and onboard new proprietary equipment and tools in support of manufacturing. Assist in the maintenance/calibration of new equipment, • Assist in the development, drafting, and execution of verification and validation protocols in accordance with regulatory requirements and industry best practices, • Assist with training and technology transfer for new projects and products, • Assist in the development and maintenance of the project schedule for assigned projects, • Ensure quality and quality control within their assigned projects, • Maintain a working knowledge of FDA 21 CFR 1271, FDA 21 CFR 820, AATB standards, ISO Standards, cGMP/CGTP, other relevant regulations/standards, and internal organizational policies and standard operating procedures, • Maintain effective communication with the project team on progress and challenges related to project tasks, • Report to work in-person and start job duties on time for established shift, • Complete required hours on assigned works shift to complete assigned responsibilities and duties, • Start job duties on time, stay on the job throughout the assigned shift to complete duties properly, and attend all scheduled meetings and appointments, • Work overtime during weekdays and on the weekend as needed to support business/operational needs, • Perform other related duties as assigned Skills • Ability to create and edit designs using CAD, • Working knowledge with design for manufacturing (DFM), • Organized and self-motivated, • Excellent attention to detail, • Strong analytical and creative thinking skills, • Effective communication and technical writing skills, • Ability to present complex ideas, • Ability to work in a fast-paced environment, • Ability to work independently and in a team environment, • Competent in project management, • Proficient in Microsoft Office, • Ability to secure and maintain a favorable background investigation and clearance. Qualifications/Requirements • Bachelors degree in an Engineering, or biological science or related field required, • Experience with Mechanical Design, • Experience with CAD Software, • Experience or Knowledge in Project Management, • Entry Level Position

Job DescriptionSalary: Purpose The Senior Project Engineer for the Medical Devices Team will be responsible for supporting existing products and the development of new products. This will include leading project management, product development, and verification & validation activities. Responsibilities • Manage and execute product development projects from ideation to market launch and sustaining, • Identify and develop project deliverables required for the launch of new products in collaboration with the Quality Assurance and Operations departments, • Lead project management activities on assigned projects including the project schedule, budget, work products and deliverables, • Execute projects following design control practices and develop necessary project inputs and outputs required for each development phase. This includes collecting customer and market feedback to identify critical product characteristics, • Design new products and accessories using CAD software and analyze with FEA or experimental analysis where needed, • Develop and execute validation protocols in accordance with regulatory requirements. Review validation data and draft validation reports, • Manage and mentor Project Engineers specific to the scope of a designated project, • Develop and review risk management documents such as failure modes and effects analysis (FEMA), • Collaborate with the QA/RQ departments to develop quality supplier agreements, labeling, product claims, 510K submissions, regulatory strategies, and sales & marketing materials, • Provide technical expertise in varied product development projects to include providing guidance to engineers in the development of product designs, manufacturing processes, troubleshooting, and design controls, • Organize effective methods of communication between project stakeholders, • Develop scalable and repeatable manufacturing processes for new products in collaboration with the Quality Assurance (QA) and Operations departments, • Author and revise standard operating procedures (SOP) according to FDA, AATB, and other regulations if applicable, • Review, analyze, and characterize critical financial characteristics of products including COGS, • Conduct group training for new processes and complete technology transfer of new products, • Perform processing of human tissue as part of the development of new processes, • Design and execute scientific experiments for product development projects. Complete data collection and data analysis to support project deliverables. Experimentation may extend to in-vitro or in-vivo assays, • Execute and plan new company initiatives including equipment onboarding, supply chain management, distribution capability, and product support, • Design and develop proprietary manufacturing fixtures and equipment. Order and evaluate commercial equipment to support new or existing manufacturing processes, • Assist with investigation of product quality events and corrective and preventative (CAPA) actions, • Support regulatory and reimbursement submissions for products, • Identify and develop a working knowledge of ASTM, AAMI, ISO, and other necessary validation or testing guidance required for assigned product development projects, • Maintain a working knowledge of FDA 21 CFR 1271, FDA 21 CFR 820, AATB standards, ISO Standards, cGMP/CGTP, other relevant regulations/standards, and internal organizational policies and standard operating procedures, • Maintain acceptable attendance and punctuality for scheduled work hours and meetings. Ensure completion of assigned tasks and responsibilities within defined timeframes, • Flexibility to work outside of normal business hours during weekdays or weekends with reasonable advance notice to support business/operational needs when necessary, • Perform other duties as assigned Skills • Ability to work independently and in a team environment, • Project management experience, • Ability to present complex ideas, • Knowledge of manufacturing environment and validation procedures, • Strong design skills and experience using CAD, • Knowledge and experience with effective DFM reviews, • Strong analytical and creative thinking skills, • Experience working with vendors and suppliers, • Excellent attention to detail and organization, • Excellent written and verbal communication, • Highest level of ethics and integrity, • Ability to lead and motivate right behaviors, • Ability to multi-task and work in a fast-paced environment, • Strong technical writing, • Effective project management, • Proficiency in Microsoft Office Qualifications/Requirements • Bachelors degree in biomedical engineering, tissue engineering, mechanical engineering, or related field, from an accredited college or university required., • 5-6 years of experience in product development required, • 4 years of experience in project management required, • Experience in mechanical design and 3D modeling CAD software required, • Experience in manufacturing process design, • Working knowledge of design control processes, • Experience with allografts and/or medical devices preferred., • Clearance of favorable background investigation required.

Job Description The Application Engineer acts as a key technical liaison between customers, the sales team, and engineering, ensuring generator systems are properly specified and integrated to meet project requirements. This role is instrumental in influencing project specifications by providing accurate technical information and serving as a trusted resource for the consulting engineering community throughout the territory to promote Caterpillar equipment standards. Essential Responsibilities: • Collaborate with sales teams and customers to define technical requirements and recommend customized generator solutions, • Interpret specifications, load requirements, and site conditions to select and size generator systems, including auxiliary components, • Develop technical documentation, including drawings and submittals, to support proposals and project execution, • Coordinate with internal teams (engineering, production, and service) to ensure correct configuration and successful project delivery, • Provide technical expertise and application support to the sales team and customers, including onsite presentations and consultations, • Assist with troubleshooting and resolving complex integration and application issues, • Stay informed on relevant codes and standards (e.g., NFPA, NEC), as well as emerging technologies in power generation, • Support special projects as assigned by the EP Sales Manager, • Adhere to all safety policies and procedures; maintain compliance with company standards, • Perform other duties as assigned Qualifications & Skills: • Deep understanding of power generation principles and application engineering best practices, • Proficiency in sizing and specifying generator systems, including ATS, switchgear, and control systems, • Strong working knowledge of Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Access), • Familiarity with federal, state, and local regulations, including emissions and fire protection standards, • Excellent business acumen, with a high level of accuracy and attention to detail, • Knowledge of HOLT CAT Commercial Engine Sales operations and Dealer Business System (DBS) is a plus, • Strong communication and interpersonal skills, including technical writing and presentations, • Proven critical thinking and problem-solving abilities, • Strong organizational skills and the ability to manage multiple projects simultaneously under tight deadlines, • Ability to provide value-driven consultation and influence technical project specifications, • Resilient under pressure, with a professional and collaborative demeanor, • Able to work independently, take initiative, and accept feedback constructively Education and Experience: • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field, • 2+ years of experience in an application, systems, or sales engineering role—preferably within power generation or related industries, • PE license or working toward EIT/PE certification is a plus Supervisory Responsibilities: None Travel: • Travel up to 45%, and some overnight travel may be required, • Valid driver’s license required Physical Requirements: • This position involves extended periods in a stationary position; additionally, occasional movement inside the office to access office machinery, file cabinets, etc., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines Work Environment: • This job is generally performed in a professional office environment, • Occasionally works outdoors and may be exposed to weather extremes conditions that include inclement weather, heat, cold, and humidity, • Frequently works at a fast pace with unscheduled interruptions Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT

We are seeking a highly experienced and motivated Water/Wastewater PM Lead to join our team in San Antonio, Texas. This leadership role will focus on the planning, design, and management of municipal water, wastewater, and water reuse projects. The ideal candidate will bring a deep understanding of engineering principles, a strong network of local clients, and a proven track record of successful project delivery and team development. Qualifications: • Bachelor’s degree in Civil, Chemical, Environmental, or Mechanical Engineering., • Active Professional Engineer (P.E.) license in the State of Texas., • 15+ years of relevant experience in water, wastewater, and water reuse engineering design., • Extensive knowledge of municipal water/wastewater infrastructure planning, distribution, collection, and treatment., • Demonstrated experience in the Texas market, including established client relationships., • Proven success in supporting business development, including proposal writing and client engagement., • Strong project management skills with experience managing budgets, schedules, and teams., • Excellent problem-solving, communication, and presentation skills., • Passion for client engagement and business growth., • Ability to lead, mentor, and grow a high-performing engineering team., • Strong collaborative mindset and ability to work effectively in team environments. Key Responsibilities: • Lead and manage municipal water/wastewater/reuse projects from concept to completion., • Maintain and expand trusted client relationships through regular engagement and delivery excellence., • Drive new business opportunities, contributing to at least $1M in new design sales annually., • Manage design and construction projects with annual revenues exceeding $3M., • Ensure high-quality, ethical, and safe execution of all project work in alignment with company values., • Provide technical leadership to ensure successful project outcomes., • Recruit, mentor, and develop staff to strengthen the team’s capabilities and performance., • Oversee financial performance of projects to ensure consistent profitability., • Stay compliant with internal business practices and contribute to continuous improvement., • Represent the company at industry events and participate in professional associations., • Maintain active P.E. licensure in Texas throughout employment. What We Offer: We are committed to investing in our people by offering a generous and comprehensive benefits package that supports the well-being of employees and their families, including: • Medical, dental, and vision insurance., • 401(k) plan with employer base and matching stock contributions., • Paid time off, including personal, holiday, and parental leave., • Life and disability insurance., • Critical illness and accident coverage., • Flexible work arrangements., • Ongoing professional development opportunities., • Competitive base that can go up to $175k, and potentially more depending on experience.

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: This is a very dynamic and fast-track position reporting to the Field Service Supervisor. The position will be the key member of service team. This position will also be the technical point of the contact person to support sales teams for commercial, industrial and utility-scale businesses. Essential Duties and Responsibilities: • Perform as a lead on more complex field engineering assignments for Battery Storage and PV applications., • Perform pre-commissioning and commissioning of Battery storage systems (AC & DC couple) and PV solar inverters achieving the milestones agreed with utility scale customers, • Perform and/or lead Preventive Maintenance projects as needed, • Perform a variety of engineering assignment involving technology applications involved in the installation, operation, testing and maintenance of central and string solar inverter, • Perform electrical and electronic troubleshooting and testing of solar inverters and its components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed, • Perform and/or troubleshooting in your region assigned to investigate solar plant issues such as DC arrays grid faults, inverter design issues, and utility grid transients, • Provide feedback to the engineering team on possible mechanical and electrical design improvements, • Lead upgrade projects (software and hardware) in the field and interact with customers to explain the technical scope of the project, • Work with customer EMS/SCADA engineers to set-up systems communication and parameters, • Create Field Service procedures if there is not available for trouble-shooting, and maintenance, • Participate on training material some customers as requested but the Training Manager, • Research alternative components that can be used in the field, • Coordinate with R&D engineering in China if required help during troubleshooting, • Take the lead in some projects such as upgrades or retrofit as well as commissioning, • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer, • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar plants, • Help on the repair activities in the Service center, • Prepare, deliver and submit field reports to customer and management, • Support development of technical proposal and provide comments on the technical content and level of effort of the proposed scope of work, • Conduct site visits, experimental investigations and analyze engineering problems, propose solutions and alterative, and provide recommendations Minimum Requirements: • 7 plus years of overall experience in engineering filed, • 3 years of experience in Battery Storage systems and 2 years for solar inverters, • Must be fluent in Mandarin, • Must possess the ability to work with test equipment and hand tools as required, • Must possess customer service, problem-solving skills, and possess decision making and analytical skills, • Must possess effective written and verbal communication skills, • Must be able to closely follow instruction and pre-established procedures/SOP to perform the ductions of the job, • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • OSHA, NSPA70A, Electrical Safety Education or Desired License and Certificates: • Bachelor’s degree in Engineering from accredited university or college, • Renewable industry experience is required, • Power Electronics experience is required Competencies: • Technical problem solving/analytical skills, • Self-starter, strong initiatives and an excellent communicator, • System and product level mindset, • Detailed-oriented nature and strong initiative, • Strong technical support focus and a service oriented individual both with Sales team and customers Travel: • 80% Plus Work Location and Status: • Contract-to-Hire, San Antonio area, • No visa/legal sponsorship Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base pay for this role is between $36 - $40 per hour. This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. #LI-LV1

Do you enjoy achieving results coupled with a competitive drive to problem-solve and create innovative solutions to increase sales plans and overall effectiveness? The Sales Engineer/Account Manager is responsible for developing and managing the respective sales territory to achieve order volume and

Principal Sales Engineer, Enterprise. Principal Sales Engineer - Enterprise. We are seeking a high-energy, results-driven pre-sales engineer who thrives on pitching technology to leadership as well as support staff and end-users.

This team is an excellent match for any software engineer interested in understanding sales and revenue processes and growing their skills beyond software engineering. This team is a great opportunity for a software engineer with a strong focus on engineering quality, software performance, and relia

We are seeking an experienced Technical Project Manager to oversee and drive the execution of AI data projects. Technical Project Manager (Remote - East Coast Preferred). Preferred 2+ years of experience as a technical solutions or sales engineer in a tech environment or a customer-facing role withi

Job DescriptionDescription: The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business – not on the business of maintenance and materials management. Benefits At Miner we believe that Our People are what make us great and help us deliver exceptional customer service! We offer industry leading Benefits to include: • Competitive pay – Plus incentive opportunities!, • Full benefits package that starts day one – Includes medical, dental, vision, 401K with match, company-paid life insurance and disability coverage., • Uniform and boot allowance, • Competitive PTO and Paid Holidays, • Training and mentoring– Learn from our experts in the industry The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. Summary The Project Manager, National Accounts, is a highly skilled program/project leader who leads and oversees complex projects from initiation to completion. They have extensive experience in project planning, execution, and stakeholder management, ensuring projects are delivered on time, within scope, and within budget. This role will play a key role in ensuring high levels of customer satisfaction while driving project coordination, rollout activities, and internal alignment across sales, operations, and service teams. This role offers a unique opportunity to develop skills in client relationship management and project delivery within a high-visibility, fast-paced national accounts environment. Core Job Duties • Establish and maintain processes for managing scope during the project lifecycle, setting quality and performance standards and assessing risks., • Support assigned national accounts by managing day-to-day project coordination, account deliverables, and communication plans., • Build and maintain productive relationships with customer stakeholders and internal teams to support long-term account success., • Assist in preparation and execution of QBR's, renewal discussions, and strategic account plans., • Develop and maintain partnerships with third-party resources, including vendors and researchers., • Assign and monitor resources to ensure project efficiency and maximize deliverables, • Report project outcomes and/or risks to the appropriate management channels and escalate issues, as necessary, according to project work plan, • Stakeholder Management: ability to quickly build strong relationships with clients, executives, and team members., • Risk Management: identifying potential risks and developing strategies to mitigate them., • Excellent verbal and written communication skills. Must be able to clearly convey ideas, expectations, and updates to teams and stakeholders., • Strategic Thinking: exceptional ability to align program/project strategies with business goals, • Technical Expertise: understanding of project management methodologies, tools, and industry specific requirements., • Strong leadership skills: ability to inspire, motivate, and guide a team(s) toward achieving program/project goals., • Proficient with Microsoft Office Suite or related software. Requirements: Education and Experience • A BS/BA degree from an accredited college/university; PMP and/or LEAN Six Sigma Certification., • A minimum of five years of project management experience, with at least two years of leading complex, multi-million dollar projects., • Additional certifications in one or more of the following are ideal:, • Certified Software Quality Engineer (CSQE), • Certified Scrum Master (CSM), • Proven PMP in startups or high-growth companies with working experience with SO9001, AS9100, ISO13485, • Excellent Program and Quality management. Must have expertise in managing large, cross-functional projects using Waterfall and Agile methodologies., • Strong analytical and problem-solving skills., • Proficiency in data analysis and reporting tools (e.g., Excel, compensation software)., • Excellent communication and interpersonal skills., • Strong attention to deadlines and budgetary guidelines., • Ability to work independently and as part of a team, • Knowledge of sales compensation best practices and regulations., • Familiarity with CRM systems (e.g., Salesforce, Paylocity) is a plus., • Experience in developing web technologies and software platforms for maximum usability. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to use hands or fingers, handle or feel objects, tools or controls, the employee is occasionally required to stand; walk; sit; reach with hand and arms; climb or balance; and stoop, kneel, crouch or crawl. The employee must occasionally lift and or move up to 25 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision and the ability to adjust focus. Occasionally, the employee is required to wear approved Personal Protective Equipment (PPE) when on certain parts of company and/or customer property. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The work is performed in various locations, including warehouses, distribution centers, manufacturing plants, refineries and hospital settings. Employees may work with co-workers’ side-by-side with a moderate level of activity being performed. he noise level in the work environment is moderate to high. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Position requires moderate travel. Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group’s Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company’s good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay.

Job Description Ardurra is seeking a Certified Engineer In Training to join our Public Works Group in San Antonio, Texas. Primary Function Under general supervision, performs assignments of limited scope which require the application of standard techniques, procedures, and criteria in carrying out a sequence of related design engineering tasks. Primary Duties • Participates in the development of project design concepts and criteria, • Organizes project information and records systems, • Designs and prepares working drawings and related project documents, • Makes recommendations on design alternatives and assists in proposal preparation, • Serve as Engineer I for multiple public works projects, • Client management, monitor/manage budgets and schedules, • Coordinate with project design team members, subconsultants, clients, stakeholders, contractors and permit agency representatives regularly, • Manages both internal and external resources required to successfully complete projects including coordination and supervision of design staff, • Cultivates strong relationships with clients, • Provides quality assurance and control for deliverables including proposals, • Attends engineering/industry events and conferences, • Manage time wisely, and effectively prioritize multiple competing tasks, • Highly self-motivated self starter, able to forecast and initiate project management tasks, • Work independently but collaborate as needed, • Bachelor’s Degree in, Civil Engineering from an accredited university or college, • A minimum of 1-2 years of experience in engineering and design with a focus on public works, roadway, drainage and utility design, • Familiarity with local municipalities, CoSA, SAWS and TxDOT design and procedures, regulatory compliance and agency coordination, • State of Texas EIT license, • Strong communication skills both written and verbal, • Strong organizational, analytical, and problem-solving skills While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-KB1

Job Description Ardurra is seeking a Senior Engineering Project Manager to join our staff in San Antonio, TX! Ardurra is a multidisciplinary civil engineering services firm which provides broad-based solutions tailored to the specific needs of the public and private sector. We leverage the depth of our professional and technical expertise, as well as our integrated structure, to deliver practical, innovative solutions for our clients. We have been creating opportunities for our employees to develop both personally and professionally. As a result, our team has contributed to some of the nation’s most important infrastructure projects. These are projects that can positively impact people’s lives. Primary Function: Manages the full life cycle (proposal-initiation-execution/control-closeout) of design engineering or engineering/construction projects and assumes full responsibility for project profit or loss. This includes managing all activities related to project scope, schedule, cost, cash flow, quality, communications, resources, procurement, and risk elements required to optimize client service, quality, and fiscal responsibility. The Project Manager’s overall objective is to build and maintain a positive client relationship, and to achieve or exceed the estimated profit margin for the project. Primary Duties: • Participates in project costing and bid preparation to the extent required., • Reviews assigned project(s) after award to employer to define project scope, determine work procedures/sequences, and develop schedules, budgets, manning tables, vendor lists, and progress billing points., • Establishes contractor-client liaison network to keep all interested parties informed of project planning, start date, and work progress., • Forms a project work team and sees that responsibilities are assigned and execution of tasks are begun and completed according to schedule., • Submits documents to Federal, state, and local authorities for code compliance review and obtains the various permits required., • Holds regularly scheduled project progress review meetings to ensure that:, • A project contract’s terms, conditions, and specifications are being met., • Project personnel adhere to federal and state regulatory requirements and company policies., • Delays and cost overruns, at best, are entirely avoided, or, at worst, kept to a minimum., • Manpower, equipment, materials, and quality problems are recognized for timely intervention and resolution., • On-site supervision maintains staff morale and interacts appropriately with client counterparts., • Information for progress billing purposes is submitted correctly and on time., • Meets with client management as necessary during a project’s terms to resolve issues and at a project’s completion to obtain final client approvals., • Bachelor’s Degree in, Civil Engineering from an accredited university or college, • Professional Engineer (PE) License in the state of Texas is required, • 15+ years’ of related experience in design or process engineering, plant operations or start-up, and/or field construction (or equivalent working knowledge/experience), • Specific experience with SAWS (San Antonio Water System) his highly desired, • Prior Project Management experience in the water/wastewater industry on public works projects in San Antonio and surrounding municipalities, • Excellent written and verbal communication skills, including ability to interface with clients, contractors and regulatory agencies is critical, • Excellent technical writing skills for use in development of engineering reports and studies, • Strong organizational, analytical and problem-solving skills, • Highly self-motivated, able to anticipate and initiate subsequent project tasks, working independently or with minimal instruction, • Able to work efficiently within a predetermined project budget and schedule, • Strong organizational skills, and ability to function efficiently within a project team environment Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-KB1

Job DescriptionAbout the Company Our client is at the forefront of the AI revolution, providing cutting-edge infrastructure that's reshaping the landscape of artificial intelligence. They offer an AI-centric cloud platform that empowers Fortune 500 companies, top-tier innovative startups, and AI researchers to drive breakthroughs in AI. This publicly traded company is committed to building full-stack infrastructure to service the explosive growth of the global AI industry, including large-scale GPU clusters, cloud platforms, tools, and services for developers. * Company Type: Publicly traded * Product: AI-centric GPU cloud platform & infrastructure for training AI models * Candidate Location: Remote anywhere in the US Their mission is to democratize access to world-class AI infrastructure, enabling organizations of all sizes to turn bold AI ambitions into reality. At the core of their success is a culture that celebrates creativity, embraces challenges, and thrives on collaboration. The Opportunity We are seeking a Cloud Solutions Architect (Pre-Sales) to join our client's team. This role offers an exciting opportunity to work with state-of-the-art AI and cloud technologies, including the latest NVIDIA GPUs, and contribute to one of the most powerful commercially available supercomputers. What You'll Do * Act as a trusted advisor to clients, providing technical expertise and guidance throughout engagements * Conduct PoCs, workshops, presentations, and training sessions on GPU cloud technologies and best practices * Collaborate with clients to understand their business requirements and develop solution architectures * Design and document Infrastructure as Code solutions, technical documentation, and how-tos * Help customers optimize pipeline performance and scalability * Serve as a single point of expertise for customer scenarios across product, technical support, and marketing teams * Assist with marketing efforts during events such as hackathons, conferences, and webinars What You Bring * 5+ years of experience as a cloud solutions architect, system/network engineer, developer, or similar technical role focused on cloud computing * Strong hands-on experience with IaC and configuration management tools (preferably Terraform/Ansible), Kubernetes, and skills of writing code in Python * Solid understanding of GPU computing practices for ML training and inference workloads, GPU software stack components, including drivers, libraries (e.g. CUDA, OpenCL) * Solid understanding of the cloud ML tools landscape from industry leaders * Legal authorization to work in the U.S. on a full-time basis without visa sponsorship Key Attributes for Success * Self-starter who thrives in a fast-paced, evolving startup environment * Collaborative team player who can work effectively across different departments and cultures * Results-oriented with a strong sense of ownership and accountability * Innovative problem-solver who can identify new opportunities for growth * Continuous learner, eager to stay updated on the latest AI and cloud computing trends * High ethical standards and integrity, with a commitment to responsible AI development * Passionate about democratizing access to AI infrastructure Why Join? * Competitive compensation ranging from $180,000 to $300,000 per year (negotiable based on experience and location) * Comprehensive benefits package including 100% company-paid medical, dental, and vision coverage for employees and families * 401(k) plan with a 4% match program * Stock options plan * Flexible remote work environment * 20 weeks paid parental leave for primary caregivers, 12 weeks for secondary caregivers * Up to $85/month for mobile and internet * Opportunity to work with cutting-edge AI and cloud technologies * Contribute to sustainable AI infrastructure with energy-efficient data centers * Be part of a team that operates one of the most powerful commercially available supercomputers Interviewing Process * Level 1: Virtual interview with the Talent Acquisition Lead (General fit, Q&A) * Level 2: Virtual interview with the Hiring Manager (Skills assessment) * Level 3: Interview with the C-level (Final round) * Reference and Background Checks: Conducted post-interviews * Offer: Extended to the selected candidate We are proud to be an equal opportunity workplace and are committed to equal employment opportunity regardless of race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, genetic information, veteran status, gender identity, or expression, sexual orientation, or any other characteristic protected by applicable federal, state or local law. Compensation Range: $180K - $300K

Job Description FBD Partnership, L.P. is the leading, global manufacturer of frozen beverage dispensers located in San Antonio, Texas. With a customer-first business philosophy and a team dedicated to the highest product quality, FBD develops and manages strong, long-term relationships with customers in the quick-service restaurant, convenience store, theater, and theme park industries. More information about the company can be found at Summary: Designs and tests electro-mechanical components and systems for new and innovative machines, components, prototypes, and devices in accordance with internal and external requirements. This role includes mentoring junior or less experienced product engineers and reviewing the output and work of other team members. Essential Duties and Responsibilities: • Responsible for technical design (component specification, selection, modeling, and CAD design), development (prototyping and testing), and certification (agency and regulatory requirements) of systems and components., • Initiate and implement new product designs and/or design improvements, including the development and execution of reliability test plans., • Perform/coordinate product testing and validation., • Communicate with customers and vendors on requirements and materials needed for project completion., • Provide technical support to product engineering, sales, and manufacturing departments., • Coordinate and manage the integration of new designs into the product commercialization process., • Lead and/or interact with cross-functional teams to accomplish assigned tasks, within schedule and budget, with minimal/no supervision., • Facilitate and participate in project reviews and meetings., • Mentor, guide, and assist in the development and training of junior product engineers., • Must have a Bachelor’s Degree in Mechanical Engineering or other related degree., • Must have at least 5 years of experience as a Mechanical Engineer designing, developing, and specifying electro-mechanical parts and equipment., • Must be mechanically inclined with experience and proficiency with hand and power tools., • Must have a technical curriculum or knowledge of thermodynamics, fluid flow, materials science, and/or electromechanics., • Must have experience in at least two or more of the following areas: precision mechanics, electromechanical systems, pneumatics, and design with sheet metal and plastics (injection and thermoforming)., • Must be proficient in the use of parametric solid modeling software such as SOLIDWORKS, Autodesk Inventor, Mechanical Desktop, Pro-E, or Unigraphics., • Must possess excellent math skills including basic math skills and statistical analysis., • Proficient with MS Office (Word, Excel, and Outlook)., • Must have strong interpersonal skills and the ability to work in a fast-paced environment., • Must have excellent communication skills (written and verbal)., • Must be fluent in English which includes reading and writing., • Experience in heat transfer, fluid dynamics, and thermodynamic analysis of vapor compression refrigeration cycles preferred., • Proficient in the use of industry best practices for engineering design (FMEA, DFMA, etc), preferred., • Must possess a valid state driver’s license., • Required to sit, type, have eye/hand/foot coordination, occasionally stand, walk, reach, grasp, lift, push, pull and carry., • This position primarily works in a combined office/lab environment. The noise level in the work environment is usually moderate. This position may be required to work in manufacturing areas as needed., • Ability to lift and/or move up to 20 pounds., • Clarity of vision including the ability to appropriately differentiate colors., • Ability to hear, understand, and distinguish speech and other sounds., • The employee may travel in support of a project or business initiatives, typically less than 10%. FBD is an equal opportunity employer and values diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other characteristic protected by law. All employment decisions are made based on qualifications, merit, and business need.

Annual sales volume goal for Account Manager will be $3M - $5M+. Work closely with the Branch Manager, sales team, and other departments to align project goals with overall company objectives. At least 3-5 years of experience in project management, estimating, or sales within the construction or rel

Job Description Generate sales opportunities by making 130-150 outbound calls daily to prospects in our existing database to schedule on site visits for Outside Sales Representatives. Outside Sales Representative Schedule: Mon-Fri 8:00am-4:30pm Pay: $17. Previous outbound call center and/or inside s

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry.From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment.Not only do we offer a vast fleet that ranks among the b

At least 2 years of quota-based sales experience demonstrating a background in cold calling, commissioned, full-cycle sales experience. Monitor market conditions, innovations, and competitors' services, prices, and sales (Attend sales or trade meetings, read related publications). Negotiate prices o

Related experience may include: Account Manager, Rental Sales, Parts Sales, Service Manager, Customer Service Representative, Construction Manager, Tools Manager, Counter Sales Representative, Equipment Associate, Manager Trainee, Manager in Training Base Pay Range: $40,000. If you are interested in

At Dollar General, our mission is Serving Others! We value each and every one of our employees.Whether you are looking to launch a new career in one of our many convenient Store locations, Distribution Centers, Store Support Center or with our Private Fleet Team, we are proud to provide a wide range

Our team of engineers take pride in what they develop and constantly innovate to provide the best solution. Captivation Software is seeking a highly motivated and experienced DevOps Engineer to join our fast-paced development team. The DevOps Engineer will be responsible for implementing infrastruct

At Dollar General, our mission is Serving Others! We value each and every one of our employees.Whether you are looking to launch a new career in one of our many convenient Store locations, Distribution Centers, Store Support Center or with our Private Fleet Team, we are proud to provide a wide range

We are looking for an engineer who can apply AI, data analysis, and automation to secure the software supply chain. Clear communication skills to explain AI-driven findings to engineering, security, and compliance audiences.

Follow company work processes to receive, open and unpack cartons and totes; store merchandise in stock room or move directly to sales floor.

Come join our growing team and make a difference every day! AnaVation is seeking a highly skilled Senior Software Engineer with deep expertise in API development, security, and standardization. The ideal candidate will possess strong software engineering expertise, proven cross-functional leadership

We are currently seeking a talented and experienced Software Engineer to join our team. As a Software Engineer, you will be responsible for designing, developing, and implementing complex software capabilities for computer-based systems. Will work closely with other talented engineers to create soft

Harbor Health looking for an experienced Senior Software Engineer - Insurance Team. Our Senior Software Engineer will be responsible for:. Successful Senior Software Engineers will have:.

The ideal candidate appreciates partnering with our customer and a group of engineers to create capabilities to support cybersecurity missions. Our team of engineers is working with cutting edge technologies to create innovative solutions that meet our customers ever-growing requirements. Our engine

Full-Stack Engineer to join our growing software development team. Software Engineer, you will be responsible for mentoring junior software developers ensuring they follow best practices and design patterns. Software Engineer Responsibilities:.

Figma also offers sales incentive pay for most sales roles and an annual bonus plan for eligible non-sales roles. Enthusiasm for mentoring other engineers and helping shape engineering culture. You’ll work closely with your engineering peers to chart out upcoming work and how best to execute on it

At Accenture Federal Services, nothing matters more than helping the US federal government make the nation stronger and safer and life better for people.Our 13,000+ people are united in a shared purpose to pursue the limitless potential of technology and ingenuity for clients across defense, nationa

Figma also offers sales incentive pay for most sales roles and an annual bonus plan for eligible non-sales roles. At Figma, Engineering is a key part of our super power to build the industry-leading products that revolutionized collaborative design and production. As our business grows rapidly, we��

First Care Medical is seeking a highly skilled and motivated Software Engineer to join our team. As a Software Engineer, you will play a critical role in the development and maintenance of our healthcare software solutions. Bachelor's degree in Computer Science, Software Engineering, or a related fi

Figma also offers sales incentive pay for most sales roles and an annual bonus plan for eligible non-sales roles. Rendering & Animation engineers use a combination of C++ and TypeScript for CPU-side code (to support our two renderers); our shaders are written in GLSL. The Rendering & Animation team

We’re looking for a Senior Software Engineer who thrives in fast-moving, high-growth environments — someone who can balance shipping quickly with building the right long-term foundations. Build clean, efficient, high-quality solutions and set the bar for engineering best practices. Excellence in