Solar electrical jobs in Arlington, VirginiaCreate job alerts

Company Overview: MN8 Energy is one of the largest independent solar energy and energy storage owner-operators in the U.S., serving enterprise customers with clean energy and complementary solutions, such as battery storage and EV Charging, to enable an electrified, decarbonized world. Originally founded inside of Goldman Sachs in 2017, our fleet has grown to nearly 4-gigawatts of solar, including 875 projects across 28 states, and over 270 megawatts of battery storage projects, with each project tailored to achieve the bold decarbonization targets and goals of our more than 200 blue-chip customers. MN8 is headquartered in New York with offices in Texas, Florida and Madrid. Position Overview: The Solar Electrician has an Electrical Journeyman license and is the most experienced field position which performs both electrical and mechanical services. The Solar Electrician primary objective is to ensure that all equipment serviced, operates at the highest level while providing leadership and training to other field positions. As the Solar Electrician, you will: • Demonstrate integrity, initiative, work ethic, as well as a commitment to safety and quality on all tasks assigned, on a continuous basis., • Complete all safety training as required by the company., • Ensure that all safety policies and procedures, related to any work performed, have been reviewed and understood before work begins., • Attend and participate in weekly safety meetings., • Oversee, provide direction, and training to Solar Technician 1 and Solar Technician 2 working in the area., • Ensure that all required Personnel Protective Equipment has been received, inspected and utilized in accordance with applicable safety policies and procedures., • Perform Preventive and Corrective Maintenance on solar, energy storage and EV charging installations in accordance with MN8 and OEM standards., • Troubleshoot solar, energy storage and EV charging installations efficiently, determining the root cause and correct repair required to place the equipment back into service., • Complete all assigned task safely, correctly and in the allotted time., • Ensure all provided vehicles, tools, equipment, electronics, and parts are accounted for, well maintained, free of damage, properly stored and., • Accurately complete all required documentation, checklist, timecards and photography for work performed., • Complete all other duties and task which may be assigned by direct supervisor. Our ideal candidate will have: • High school diploma or equivalent., • State issued Electrical license (Journeyman License)., • Must be able to pass a criminal background and motor vehicle record check., • Ability to communicate in English both orally and writing, • Outstanding communication and interpersonal abilities, • Basic computer operation skills and familiarity with internet based program navigation., • Proven experience understanding and implementing OSHA regulations., • Ability to read, interpret and understand basic design drawings and schematics., • Intermediate to advance electrical theory knowledge., • Knowledge of and ability to perform and interpret IV Curve tracing, in order to determine if an issue exists. Physical requirements: • Ability to drive a vehicle., • Ability to stand for long periods of time., • Ability to walk distances up to 5 miles in a day, • Ability to ascend or descend ladders, stairs, scaffolding, ramps, and the like, maintaining 3 points of contact., • Ability to receive detailed information through oral communication, and to make the discriminations in sound., • Ability to maintain body equilibrium while walking, standing, crouching, transitioning levels on level, narrow or slippery surfaces., • Required to have visual acuity which includes depth perception, field of vision and the ability to distinguish between colors., • Ability to work in outside environments which may include but are not limited to, extreme heat (temperatures above 100℉) or extreme cold (temperatures below 32℉) for periods of more than one hour., • Exerting up to 60 pounds of force occasionally, and/or up to 40 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. Additional requirements: • Drive up to 6 hours per day to reach and return for project locations, • Travel up to 50% of the time outside of the service area., • Work outside, in the environment up to 90% of the time, performing Preventive and Corrective Maintenances., • Work in a fast-changing environment which may require quick decisions with limited processes and procedures. How we set you up for success: At MN8, we know our most valuable resource is our people. That’s why we offer the following benefits. By investing in you, we know we are investing in the clean energy of tomorrow. • Medical/Dental/Vision Insurance beginning the 1st of the month following your date of hire, • Paid Time Off, • Paid holidays and floating holidays, • 401(k) with competitive employer match, • Parental leave, • $40/hr – $58/hr In Maryland, the hourly wage for this position at the time of this posting ranges from $40/hr to $58/hr. Within that range, individual compensation varies based on job-related factors including but not limited to experience and training, licensure and certifications and other business and organizational needs. MN8 Energy is an Equal Opportunity Employer and fully subscribes to the principles of Equal Employment Opportunity to ensure that all applicants and employees are considered for hire, promotion, and job status without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, marital or familial status. Recruitment Fraud Alert MN8 Energy will never conduct interviews via text message or instant messaging platforms. All interviews are scheduled through official company channels. If you receive suspicious outreach claiming to be from MN8, please verify the source before responding. For questions or concerns, contact our HR team at HR@mn8.com.

Job DescriptionMantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility—inside and out—and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. This role requires either permanent relocation to one of the following locations listed below (relocation assistance provided) or the ability to travel frequently from your location (50%+ travel annually): • Umatilla, OR (Urgent need), • Seattle, WA, • Chicago, IL, • Raleigh, NC, • Pittsburgh, PA, • Reno, NV, • Ashburn, VA (Urgent need) Build something that matters—with people who trust you to own outcomes and deliver exceptional results for customers. Join us at Mantis Innovation where authentic people show up as themselves, take real ownership, and are trusted to do what’s right—for the business and the customer. Our culture is rooted in Tenacity, Excellence, Accountability, Curiosity, and Humility, and it shows up in how we work, collaborate, and deliver results that matter. WHY THIS ROLE • Starting salary: $100,000++++, • Annual bonus: Up to 10%, based on individual and company performance, • What sets us apart? A BMS Bonus Program that rewards ownership, business results, and customer impact, • Growth-focused: Ongoing training to develop both technical expertise and leadership capability WHO YOU ARE • Curious, driven, and focused on delivering strong outcomes, • You ask smart questions, dig into challenges, and continuously improve how work gets done, • You want your ideas to matter—and to be trusted to deliver the best results for the customer WHAT YOU’LL DO • Install, program, commission, and troubleshoot BMS/controls systems, • Partner with project teams to deliver high‑quality, reliable solutions, • Own system performance and ensure customers consistently receive exceptional results, • Depending on your location, travel approximately 40-50% throughout the year to support projects and customers around the USResponsibilities, • Service of existing building control systems., • Startupof complete building control systems., • Install building control components(controllers, panels, conduit, sensors, etc.), • Low voltage control panel building., • Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements., • Perform a point-to-point checkout per standard procedures., • Perform software/hardware calibration required for proper equipment and system operation., • Perform low voltage cable installation/termination for small projects if needed., • Take on project commissioning activities to include daily meetings and documenting results. Qualifications, • Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task., • Can work both independently and as a part of a team., • Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time., • Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint), • Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...), • Familiarity with CAD, construction drawings, • Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU), • Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6, • Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions, • Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes, • Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network., • Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations., • Possess valid state motor vehicle license and possess safe driving record as required by company’s insurance carrier., • Able to pass State and Federal security screening., • Out-of-state travel will be required depending on your location (estimated to be between 50%+ throughout the year if you are not located in one of the cities listed above), • Understanding of Mechanical and Electrical equipment in a typical Data Center application Location Qualifications, • Chicago requirement: At least 5+ strong years of hands-on experience with BMS software, Tridium Niagara/Distech is required, • PNW (Seattle and Umatilla) requirement: PLC/SCADA Ignition experience, • All other locations: Experience with BMS software; Tridium/Distech is preferred. Must understand wire sheet programming and logic. The above pay range is Total Cash; a combination of base salary (dependent upon experience/Tech level) and additional bonus potential through internal programs (annual bonus, living expenses, profit sharing)This role is open to and may offer additional compensation in the form of relocation assistance to candidates willing to relocate permanently. The total cash range above also depends on the location you choose to relocate to. Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you?We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement?Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we’re committed to building an inclusive and equitable team—so if this role excites you, we’d love to hear from you, even if your experience doesn’t match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionMantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility—inside and out—and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. This role requires permanent relocation to one of the following locations listed below (relocation assistance provided): • Umatilla, OR (PLC/SCADA Ignition experience required), • Ashburn, VA (Data Center experience as well as experience with Tridium Niagara/Distech. Must understand wire sheet programming and logic) Build something that matters—with people who trust you to own outcomes and deliver exceptional results for customers. Join us at Mantis Innovation where authentic people show up as themselves, take real ownership, and are trusted to do what’s right—for the business and the customer. Our culture is rooted in Tenacity, Excellence, Accountability, Curiosity, and Humility, and it shows up in how we work, collaborate, and deliver results that matter. WHY THIS ROLE • Starting salary: $100,000++++, • Annual bonus: Up to 10%, based on individual and company performance, • What sets us apart? A BMS Bonus Program that rewards ownership, business results, and customer impact, • Growth-focused: Ongoing training to develop both technical expertise and leadership capability WHO YOU ARE • Curious, driven, and focused on delivering strong outcomes, • You ask smart questions, dig into challenges, and continuously improve how work gets done, • You want your ideas to matter—and to be trusted to deliver the best results for the customer WHAT YOU’LL DO • Install, program, commission, and troubleshoot BMS/controls systems, • Partner with project teams to deliver high‑quality, reliable solutions, • Own system performance and ensure customers consistently receive exceptional results, • Depending on your location, travel approximately 40-50% throughout the year to support projects and customers around the USResponsibilities, • Service of existing building control systems., • Startup of complete building control systems., • Install building control components (controllers, panels, conduit, sensors, etc.), • Low voltage control panel building., • Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements., • Perform a point-to-point checkout per standard procedures., • Perform software/hardware calibration required for proper equipment and system operation., • Perform low voltage cable installation/termination for small projects if needed., • Take on project commissioning activities to include daily meetings and documenting results. Qualifications, • Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task., • Can work both independently and as a part of a team., • Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time., • Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint), • Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...), • Familiarity with CAD, construction drawings, • Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU), • Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6, • Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions, • Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes, • Has had experience with BMS software, Tridium is preferred and understands wire sheet programming and logic., • Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network., • Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations., • Possess valid state motor vehicle license and possess safe driving record as required by company’s insurance carrier., • Able to pass State and Federal security screening., • Out-of-state travel will be required depending on your location (estimated to be between 50%+ throughout the year if you are not located in one of the cities listed above), • Understanding of Mechanical and Electrical equipment in a typical Data Center application, • Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint)Location Qualifications, • PNW (Umatilla) requirement: PLC/SCADA Ignition experience, • Ashburn, VA: Experience with BMS software; Tridium/Distech is preferred. Must understand wire sheet programming and logic. The above pay range is Total Cash; a combination of base salary (dependent upon experience/Tech level) and additional bonus potential through internal programs (annual bonus, living expenses, profit sharing).This role is open to and may offer additional compensation in the form of relocation assistance to candidates willing to relocate permanently. The total cash range above also depends on the location you choose to relocate to. Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you?We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement?Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we’re committed to building an inclusive and equitable team—so if this role excites you, we’d love to hear from you, even if your experience doesn’t match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description SET Development is supporting a confidential, venture-backed aerospace company developing first-of-kind space-based solar power systems — designed to deliver continuous baseload energy from orbit to ground, 24/7, across entire continents, without batteries or seasonal constraints. This is an IMMEDIATELY AVAILABLE POSITION! This is an early-stage, high-impact engineering environment. You will own real decisions, work across disciplines, and contribute directly to hardware that will fly. ───────────────────────────────────────────── THE ROLE We are seeking a Spacecraft Solar Array Engineer to lead the design, development, qualification, and in-orbit performance optimization of spacecraft photovoltaic systems — from initial concept through end-of-life. ───────────────────────────────────────────── KEY RESPONSIBILITIES Solar Array Design & Architecture • Design spacecraft solar array systems including cell technology selection (multi-junction), string configuration, panel layout, and system interfaces, • Develop power budgets and orbital energy balance models across eclipse cycles, pointing constraints, and end-of-life degradation scenarios, • Produce interface control documents (ICDs), design specifications, and technical documentation Analysis & Modeling • Perform electrical, thermal, and structural analyses of solar array assemblies, • Model radiation effects, thermal cycling, and long-term degradation, • Evaluate system-level performance impacts across mission scenarios Hardware Development & Integration • Support development of deployable solar array systems including structural interfaces and articulation mechanisms, • Contribute to rapid prototyping, hardware integration, and validation, • Collaborate with structures, avionics, manufacturing, and supply chain teams Test & Qualification • Define and execute qualification and acceptance test campaigns: TVAC, vibration, shock, electrical performance, and lifecycle testing, • Analyze test results, respond to anomalies, and drive design improvements ───────────────────────────────────────────── REQUIRED QUALIFICATIONS • Bachelor's degree in Electrical, Aerospace, or Mechanical Engineering (or related field), • 5+ years of experience in spacecraft solar arrays, spacecraft power systems, or space-rated photovoltaic hardware, • Demonstrated experience in at least one of: solar array design/sizing, power system modeling, or space hardware qualification and testing, • U.S. citizenship required (export-controlled work) ───────────────────────────────────────────── PREFERRED QUALIFICATIONS • M.S. or Ph.D. in Electrical, Aerospace, or Mechanical Engineering, • Hands-on flight program experience with solar arrays or power subsystems, • Familiarity with power regulation, string configuration, and bypass diode design, • Experience with radiation effects, degradation modeling, and ECSS/NASA/MIL qualification standards, • Hands-on lab experience: hardware builds, soldering/cell interconnection, environmental testing, • Experience with deployable structures or solar array drive mechanisms (SADMs) ───────────────────────────────────────────── COMPENSATION & BENEFITS • Competitive Base Salary, • Relocation Assistance available, • Medical, dental, and vision insurance, • Disability and life insurance, • Competitive paid time off, • 401(k) with employer matching ───────────────────────────────────────────── ITAR / EXPORT CONTROL REQUIREMENT To comply with U.S. Government space technology export regulations (ITAR), applicants must be a U.S. citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. ───────────────────────────────────────────── ABOUT SET DEVELOPMENT SET Development is a premier aerospace consulting firm providing highly specialized engineering talent across space, defense, and advanced technology programs. Our team supports some of the most complex and impactful missions in the industry. ───────────────────────────────────────────── HOW TO APPLY Apply directly through this posting or reach out to SET Development for a confidential conversation about the role and client organization. ───────────────────────────────────────────── EQUAL OPPORTUNITY EMPLOYER SET Development is an Equal Opportunity Employer. Employment decisions are based on merit, competence, and qualifications, without regard to race, color, religion, gender, national origin, ethnicity, age, disability, sexual orientation, gender identity, veteran status, or any other protected status. We encourage all qualified candidates to apply, even if you do not meet every listed qualification. Powered by JazzHR JJfGCg0N8S

Job DescriptionAbout Us Greenscape Energy is the fastest-growing green solutions provider in the DMV. As a group of highly-trained professionals, the Greenscape team stands ready to meet the needs of our clients by providing state-of-the-art energy solutions for the rapidly-growing green industry. From engineering to installation, our team collectively ensures projects are completed according to specifications, with excellence and on time. Greenscape provides on-going training to each employee to keep them abreast of new green technologies, ever-changing methodologies in the construction industry with a primary focus on delivering the best solution available to each of our clients. At Greenscape we never forget that we are allowed the privilege of serving this market, because of our team! We provide competitive pay, excellent leave plans, and great benefits including a retirement plan with company match. About the Job The Solar Installer will install photovoltaic (PV) solar systems on roof tops and other structures for residential homes, small businesses and commercial properties throughout the DC, Maryland, and Virginia region. Duties and Responsibilities Include: • Read and interpret plan sets to inform the installation process, • Assemble, install and maintain PV solar systems in compliance with site assessment and schematics, • Operate micro-inverter, optimizer and string solar systems, • Perform minor electrical work as it relates to panel installation, • Connect solar system to the electric grid using proper grounding systems and controls, • Assess job sites to identify and resolve any potential hazards, • Weatherproof the solar installation in accordance with local safety regulations and the manufacturer specifications, • Conduct work within OSHA safety standards, • Perform other duties as assignedAbout You, • High School diploma or equivalent combination of education and experience, • Solar Installation Certification from a Training Program or Accredited Institution, • Valid Driver's License with acceptable driving record, • Accuracy - detail and results oriented, • Adaptability - operate consistently and effectively in any environment for an extended period of time, • Communication - able to communicate effectively and clearly in a professional work environment both verbally and in writing, • Critical Thinking - able to think independently and problem solve both personnel issues and project issues, • Customer Service Orientation - actively look for ways to assist others in a positive and professional manner, • Initiative - self-sufficient and highly motivated, • Math - understand and can use high school level mathematics, • Writing - read and write at high school level, • Professionalism - high degree of professionalism and strong work ethic, • Team Work - able to work in and contribute to a team environment, • Time Management - Able to handle multiple tasks and project deadlines, • Technology - Thorough understanding of PV Solar System installation. Knowledge of rail and balance mounting using micro-inverter, optimizer, and string systemsPhysical Requirements of the Job Solar Installers are required to perform physically demanding labor, often in varied weather conditions and at significant heights. The role requires strength, endurance, agility, and comfort with working on rooftops or in cramped spaces. Frequently lifting and moving heavy equipment, with requirements often stating the ability to lift 50 to 75+ pounds. Working full, active days in outdoor environments. Using abdominal and lower back muscles to support the body for long periods. Comfort with working on ladders, rooftops, or scaffolding (sometimes 40+ feet high). Frequent bending, stooping, kneeling, crouching, crawling, and reaching. Regularly walking, standing, and maintaining balance on uneven or sloped surfaces. Repeating the same movements, such as drilling, lifting, or tightening bolts. Using hands and fingers to grasp, handle, manipulate, and assemble small components, tools, or wiring. Ability to see details up close and at a distance, as well as the ability to distinguish between colors for electrical wiring. Working in hot, cold, wind, or rain. Occasional work in attics, basements, or tight crawl spaces. Able to wear required personal protective equipment (PPE) like harnesses, hard hats, safety glasses, and gloves.

This is a fully remote role for candidates who are based outside of the New York Metropolitan area. For those located in the area, we encourage you to consider our hybrid work arrangement (1-2 days a week in our NYC office). That said, we value flexibility and if you have a different preference, please do not let that deter you from applying – let’s talk about it! Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or take over sponsorship of any employment-based visas at this time. (e.g., H-1B, TN, visa transfer, green card sponsorship, etc.) Energy storage is the key to unlocking a future where our world is powered by renewable resources. At Convergent Energy and Power, our mission is to make the electrical grid cleaner, more reliable, and less expensive by leveraging state-of-the-art energy storage and distributed generation technologies. The Senior Engineer I, Interconnection drive project success and optimize resources across diverse markets and utilities by leading the utility interconnection process for both Front-Of-the-Meter (FTM) and Behind-The-Meter (BTM) projects across various Regional Transmission Organizations (RTOs). This role involves evaluating transmission and distribution tariffs, costs, and timelines, while managing interconnection efforts with utilities and Independent System Operators (ISOs). This role oversees consultants, ensuring compliance with utility requirements and improving internal design standards. This is an individual contributor role and therefore does not have any direct reports but will exercise informal mentorship and guidance to junior level staff. What You’ll Do Interconnection Strategy and Analysis (30%) o Understand interconnection process, timelines, and cost structures for key utilities and ISO's and communicate requirements with the Development and Engineering teams. o Identify optimal interconnection strategies based on pre-application reports, system impact study reports and grid/hosting capacity to develop the best interconnection plan. o Lead data analyses to forecast future system conditions for optimal siting, IA, PPA, financing, and M&A processes. o Evaluate interconnection system cost upgrades and work with all stakeholders on necessary adjustment of the project development schedule. o Develop interconnection strategies that directly align with the company's long-term financial and operational goals. o Occasionally support interconnection applications by preparing 10% single-line drawings, building transient stability models, and performing project feasibility analyses for submittals. Project and Portfolio Management (25%) o Manage and track the project portfolio of interconnection related studies, applications, and follow-up requirements. o Coordinate the completion of all interconnection applications with internal stakeholders, external consultants, utilities, and other external stakeholders as applicable o Work with the Sales and Land Acquisition teams to identify site selection issues by reviewing interconnection queues and providing feedback. o Research and provide interconnection process overview and timelines related to various markets for bid proposals. Stakeholder Collaboration and Leadership (20%) o Serve as the primary point of contact and the technical lead with ISOs, RTOs, TSPs, third party consultants, and utilities for all interconnection activities o Lead the technical information exchange between the Sales, Pre-Construction, and Engineering teams to ensure timely processing of interconnection applications and devise optimal strategies. o Communicate on a regular basis with manager and team members, including in person meetings at the NYC headquarters as needed to foster strong collaboration amongst team. Technical Review and Guidance (15%) o Perform peer-review of engineering designs and technical data in preparation of interconnection application packages and Pre-Construction design sets (10%, 30%, and 50%) o Lead the review, analysis, and interpretation of interconnection results, and provide technical insights and guidance. o Act as interconnection SME during in supporting project financing and project hand-offs to the Project Execution team. Consultant and Agreement Management (10%) o Identify, contract, and manage consultants as necessary to support the interconnection process including injection analysis, technical design, models, and other application deliverables in addition to engineering review of utility schedules and cost estimates. o Support negotiations of technical terms & conditions of interconnection agreements and subcontractor MSA’s and work orders. Required Qualifications o Bachelor’s degree. o Minimum 6+ years’ experience with transmission and distribution planning, managing the interconnection of renewable energy power facilities, with experience in the PJM, NYISO and ISO-NE markets. o Previous experience in a role that directly impacted on the success of projects across diverse markets and utilities, influencing long-term company strategy. o Proficient understanding of AC/DC fundamentals and three-phase Power systems. o Advanced working knowledge of Power flow modeling and analysis. o Foundational knowledge of RTO and utility tariffs, business practices, protocols, procedures, and guidelines. o Expert knowledge and understanding of U.S. power markets, with a focus on solar and battery energy storage distributed and transmission interconnections. o Advanced knowledge of storage and solar project development, utilities, interconnection, permitting, and contracting. o Proficient in identifying and resolving complex problems both independently and collaboratively, delivering comprehensive solutions that meet the needs of all stakeholders. Proficient in independently analyzing and interpreting complex interconnection study results and proactively resolving technical, financial, and strategic challenges. o Proven experience of mentoring junior engineers and fostering cross-functional collaboration between internal and external stakeholders. o As applicable, this role may involve physical activity, including but not limited to standing, walking, or lifting up to 50 lbs. o Alignment with Convergent’s mission and values: Continuous Improvement, Diversity Equity and Inclusion, Ethical Governance, Safety, Sustainability and a strong interest in the Clean Energy Transition. o 20% travel expected, primarily for team events, project sites, and company-wide meetings. Travel to remote sites may be required, which could involve driving or air travel. Preferred Qualifications o Degree specialized in Electrical Engineering. o PE is preferred. o Experience working for both utility(s) and developer(s) is preferred. o Experience with power system software packages such as PSCAD, SKM, AutoCAD, PSS/e, TARA, Aspen One-Liner is preferred. o Experience in modeling Battery Energy Storage System for transient stability analysis using PSCAD and feasibility analysis using SKM software is plus o In-depth understanding of the protection principles and practices for transmission lines, distribution feeders, and major substation equipment. o Experience or training in Lean and/or Six Sigma concepts preferred. We're dedicated to fostering a welcoming and inclusive culture that prioritizes the safety and well-being of all our clean energy professionals. We embrace and learn from our diverse backgrounds, encouraging open dialogue and growth. Through resources like our active Employee Resource Groups, DEI Working Group, and comprehensive training and workshops, we're continuing to build a supportive community that celebrates the convergence of our identities. Our priority is to ensure that every team member feels valued and supported to have a healthy balance between work life and personal life. We believe a full life outside of the office makes for a happier, healthier team. We support that by offering robust benefits such as but not limited to, the following: • Medical, Dental, and Vision insurance, • Vacation, Sick, and Volunteer days, • 401K with an employer safe harbor match, • Special Vendor Discounts on programs for:, • Identity theft and fraud prevention Base Salary Range: $135,000 - 150,000; Salary Commensurate with Qualifications and Experience. We encourage people from minority or marginalized groups to apply. If you don’t meet 100% of the above qualifications, but see yourself contributing, please submit an application. Convergent is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, height, weight, or any other characteristic protected by applicable laws, regulations, and ordinances. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements in the country where we operate. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please send a request to talent@convergentep.com

Opportunity Adapture Renewables, Inc. is on a mission to be a leader in this new era of sustainable energy. Drawing upon an extensive knowledge base, we develop, finance, engineer, build, own, and operate high quality utility-scale photovoltaic projects and battery energy storage projects. Our Technology team is looking for a talented OT Security Engineer to help support the efforts of our fast-growing company. Adapture Renewables is owned by KIRKBI Climate– the private holding and investment company of the Kirk Kristiansen family founded to build a sustainable future for the LEGO® brand through generations. Overview This position will work in our Technology team and is responsible for designing, implementing, and maintaining cybersecurity controls across ARI’s SCADA and industrial control system (ICS) environments, including the interfaces between site OT networks and our enterprise IT infrastructure. The role owns NERC CIP Low impact compliance across the operating fleet, the vendor security relationships that gate access to our plants, and the security telemetry that feeds our centralized monitoring stack. This role reports to the Director of Technology & Security. ARI currently partners with an external MSSP for OT security operations. The candidate may be based remotely in the U.S., with regular travel to operating PV and BESS sites and periodic travel to our Bay Area home office. Core Responsibilities • Design and implement OT network segmentation between site SCADA, control, and enterprise zones across the operating fleet., • Own secure remote access for vendors and ARI staff: jump hosts, MFA, session recording, and just-in-time access patterns., • Deploy and tune EDR on plant servers and engineering workstations within OT reliability constraints., • Maintain hardened baselines and configuration control for site servers, HMIs, RTUs/RTACs, and OT network equipment., • Run vulnerability assessment and patch / mitigation cycles for OT assets in coordination with site operations., • Maintain and execute the technical controls required under CIP-003 R2 Attachment 1 (cyber security awareness, physical access controls, electronic access controls, incident response, and TCA / removable media controls) across all Low impact BES Cyber Systems., • Maintain BES Cyber System asset inventories and categorization evidence (CIP-002)., • Maintain CIP-013 Low impact supply chain risk management evidence for vendors with electronic access., • Support CIP-008 incident reporting workflows and CIP-011 information protection requirements., • Participate in self-certifications, internal controls testing, and external audits; produce audit-quality artifacts., • Establish and enforce security requirements for SCADA, inverter, and BESS OEMs, ISPs, and field service vendors; review remote access requests; approve or deny based on documented policy., • Drive contractual and technical supply chain controls in partnership with Procurement and Legal, and train vendor personnel on ARI’s OT security expectations and field procedures., • Integrate OT telemetry and security logs into ARI’s centralized monitoring stack and tune detections for ICS protocols and operational patterns (Modbus, DNP3, SEL)., • Triage and lead response for OT security events; coordinate with site operations, the Compliance team, and the MSSP / enterprise SOC., • Develop and run tabletop exercises; maintain CIP-008 playbooks and capture post-incident lessons learned., • Conduct site visits to operating PV and BESS plants for inventories, validations, and control testing., • Deliver OT security awareness training for operators, technicians, and vendor partners., • Contribute to ARI’s broader cybersecurity program, aligned to CIS Controls v8, NIST CSF v2, and the in-progress IEC 62443 and ISO 27001 implementations. Qualifications and Experience • 3–5+ years in OT / ICS / SCADA security, industrial cybersecurity, or critical infrastructure security; utility, IPP, or owner-operator experience strongly preferred., • Bachelor’s degree in Electrical Engineering, Computer Engineering, Cybersecurity, or related discipline, or equivalent demonstrated experience., • Hands-on experience implementing and evidencing NERC CIP controls, with direct exposure to CIP-002, CIP-003, CIP-008, CIP-011, and CIP-013., • Working knowledge of OT networking: VLANs, L2/L3 switching and routing, industrial firewalls, DMZ design, jump architectures, and certificate-based authentication., • Familiarity with common ICS hardware and protocols: PLCs, RTUs, RTACs, HMIs; Modbus, DNP3, SEL., • Experience with SIEM / logging platforms and tuning detections for OT environments., • Preferred certifications: GICSP, ISA / IEC 62443 Cybersecurity Specialist, CompTIA Security+, or CISSP., • Strong documentation discipline; ability to produce evidence that survives audit scrutiny., • Clear written and verbal communication; able to translate security requirements into reliability outcomes for plant operations., • Solar and BESS operations experience, ERCOT market exposure, and prior NERC CIP audit participation are pluses., • Comfortable with field work, planned outage coordination, and occasional on-call response., • Valid driver’s license and ability to travel to operating sites as needed. Benefits Package • 401(k) plan with company matching contribution, • Competitive health, vision, and dental benefits, • Attractive personal time off and company holiday package, • Work-from-home policy, • Salary commensurate with experience, • $120,000 - 155,000, DOE Note Qualified candidates only. No search firms. Adapture Renewables, Inc. is committed to equal employment opportunity.

Who We Are: As a distinguished veteran-owned solar company based in Santa Clarita, we boast a decade of experience since our establishment in 2019. Our unwavering commitment revolves around customer satisfaction, integrity, and continuous innovation. What We Are Looking For: We are seeking a Part-Time Sales Representative who understands the challenges of commission-based sales and is open to a 1099 self-employed position. While we acknowledge the demands of full-time commitment, we welcome serious candidates to explore the opportunity of transitioning to a Full-Time role. This role offers 100% commission with no limitations on your earning potential, allowing you to scale your efforts across residential, small commercial, or large commercial projects. Earning potential ranges depending on your ability to sell! Position Description: The ideal candidate should possess a foundational knowledge of solar energy. Responsibilities include pricing and modeling solar systems, understanding utility companies, and NEM rates, as well as the ability to interpret electrical bills. You should be adept at sizing solar systems accurately, determining the correct number of panels and wattage. Maintaining regular communication with homeowners throughout the project, including post-completion follow-ups, is crucial. What We Offer: • A decade of experience, enabling us to overcome even the most complex installations., • Project control, ensuring efficiency and excellence throughout., • Competitive commissions with limitless potential for earnings., • Opportunities for personal branding, marketing, and network growth., • Full in-house support, including comprehensive training and tools, to empower you as a successful sales representative., • Streamlined project timelines, with a standard 2-month duration for LADWP projects (Interconnection being the longest phase)., • Exceptional customer reviews on Google, highlighting our commitment to quality and service. Flexible work from home options available. Compensation: $1.00 - $200,000.00 per year SANTA CLARITA, CA SOLAR & ROOFING COMPANY EMPOWERING SOUTHERN CALIFORNIA WITH SUSTAINABLE SOLUTIONS At Cervus Solar & Construction, we are not just a solar company; we are a comprehensive solution to your energy and construction needs. We specialize in providing top-tier solar solutions, roofing services, and construction projects in Santa Clarita. Our team of skilled professionals is committed to delivering high-quality workmanship that meets and exceeds our clients' expectations. With a strong focus on sustainability, we are proud to offer innovative solar solutions that harness the sun’s power to provide clean, renewable energy. But our expertise doesn't stop there. We also provide robust roofing services and construction projects, ensuring we can meet all your needs under one roof, no pun intended. We believe in building relationships with our customers, not just transactions. That's why we are dedicated to providing the best customer service possible. When you partner with us, you will receive personalized attention and a tailored solution that fits your needs.

ON.energy is building the power infrastructure that makes the AI era possible. As AI demand surges past what the grid and traditional data centers can support, ON.energy provides a new class of power technology proven at gigawatt scale and trusted by the world’s leading cloud and AI companies. Our systems are already deployed across 2.5 GW of hyper-scale campuses, validated by top U.S. national labs, and certified for grid-safe operation by major utilities. With real products in the field, we’re scaling faster than the grid can, transforming power from a bottleneck into a competitive advantage for the companies building the future. Senior Electrical Specialist AI UPS — Mission-Critical Data Center Power & Energy Storage Location: Remote U.S. (with travel to active project sites across the U.S.) Travel Requirement: ~50%+ on average, with higher field deployment during active commissioning windows Position Type: Full-Time, Salaried (Exempt) + per diem eligible while traveling — Individual Contributor (no direct reports) Reports To: Senior Commissioning Manager ON.energy is building the power infrastructure that makes the AI era possible. As AI demand surges past what the grid and traditional data centers can support, ON.energy provides a new class of power technology proven at gigawatt scale and trusted by the world’s leading cloud and AI companies. Our systems are already deployed across 2.5 GW of hyper-scale campuses, validated by top U.S. national labs, and certified for grid-safe operation by major utilities. With real products in the field, we’re scaling faster than the grid can, transforming power from a bottleneck into a competitive advantage for the companies building the future. Overview The Senior Electrical Specialist serves as ON.energy’s qualifying master electrician of record in the State of Texas and the on-site electrical subject matter expert for AI UPS deployments at hyperscale data center campuses. Holding (and “hanging”) an active Texas Master Commercial Electrician license under ON.energy for the duration of employment is a core function of the role and a condition of hire. This is a high-travel, hands-on field role and an individual contributor position with no direct reports. The Specialist is the primary escalation path for electrical issues during commissioning — validating workmanship and code compliance, witnessing and signing off on key electrical tests, and driving issues to resolution with EPCs, AHJs, utilities, and OEMs on aggressive schedules. The ideal candidate brings deep field electrical experience and the authority to hold the line on safety and code compliance. Key Responsibilities License of Record & Electrical Authority • Serve as ON.energy’s qualifying master electrician of record in the State of Texas, holding (and “hanging”) your active Texas Master Commercial Electrician license under ON.energy for the duration of employment. This is a core function of the role and a condition of hire., • Act as the on-site electrical subject matter expert and primary escalation path for electrical issues that arise during the commissioning phase of ON.energy AI UPS deployments at hyperscale data center campuses., • Coach EPC field crews and ON.energy field staff on electrical safety, code compliance, and quality standards. This role carries technical authority and is the team’s electrical escalation point but does not include direct people-management responsibility. Field Inspection & Verification • Travel to project sites across the U.S., typically 50% or more of the time, to investigate, document, and drive resolution of electrical issues in the field, working outdoors in active construction environments in all weather., • Validate that medium- and low-voltage installations, terminations, grounding, bonding, conduit, cable management, and overall electrical workmanship meet NEC, NFPA 70E, IEEE, AHJ, and ON.energy internal standards prior to energization., • Witness, verify, and sign off on key electrical commissioning activities including insulation resistance / megger testing, continuity testing, torque verification, phasing, polarity, and pre-energization inspections., • Ensure all work is compliant with relevant codes (NEC, IEEE, NFPA 70E, OSHA) and ON.energy’s internal standards. Coordination & Issue Resolution • Partner with EPC contractors, electrical subcontractors, utility representatives, AHJs, and OEM field service engineers (inverters, switchgear, transformers, BESS) to push electrical issues to resolution on aggressive commissioning schedules., • Review electrical drawings, single-line diagrams, panel schedules, grounding plans, and protective device coordination submittals from a constructability and code-compliance perspective, and flag issues back to engineering before they reach the field. Permits & Documentation • Pull, sponsor, and close out electrical permits as required by AHJs across project jurisdictions, and coordinate inspections., • Capture electrical findings, deficiencies, root-cause analyses, and corrective actions through punch lists, daily field reports, photo documentation, and as-built redlines — leaving a clear paper trail behind every site visit. Required Qualifications • Active Texas Master Electrician license — Commercial (in good standing, no current disciplinary actions)., • Willingness to serve as ON.energy’s qualifying master electrician of record in Texas — i.e., to “hang” your license with ON.energy — for the duration of your employment., • 10+ years of progressive electrical experience, including significant time working as a licensed journeyman prior to obtaining your master license., • Hands-on experience installing, terminating, and/or troubleshooting medium-voltage (up to 35 kV) and low-voltage commercial or industrial electrical systems., • Direct field experience with large-scale electrical equipment such as inverters, switchgear, switchboards, transformers, MCCs, battery energy storage systems, or comparable utility-scale infrastructure., • Strong working knowledge of the NEC, NFPA 70E, IEEE, and OSHA standards as they apply to commercial and utility-scale installations., • Ability to read and interpret electrical drawings, single-line diagrams, schematics, panel schedules, grounding plans, and protective device coordination documentation., • Comfort working outdoors in all weather conditions on active construction sites — including walking uneven terrain, climbing ladders, working at elevation or in confined spaces where required, and lifting up to 50 lbs., • Comfortable wearing all required PPE, including arc flash gear, for extended periods., • Strong written documentation skills and proficiency with Microsoft Office and common field/construction documentation tools (e.g., Procore, Bluebeam, or similar)., • Ability to travel to project sites across the U.S. at least 50% of the time, including occasional extended deployments during commissioning peaks., • Valid U.S. driver’s license and willingness to drive to/from sites and rental vehicles between airports and remote project locations., • Excellent communication, problem-solving, and cross-functional coordination skills, with the ability to hold the line on safety and code compliance with contractors, OEMs, and customers. Preferred Qualifications • Experience commissioning BESS, AI UPS, solar, wind, or other utility-scale energy infrastructure projects., • Experience working on EPC or design-build projects in critical infrastructure, data center, or hyperscale environments., • Familiarity with commissioning protocols and QA/QC procedures for electrical systems, including FAT/SAT, IST, and energization sequencing., • Reciprocal master electrician licenses in additional U.S. states, or willingness to pursue reciprocity where ON.energy operates., • Familiarity with power system study tools such as ETAP or SKM (no need to be a power-systems engineer — but comfort reading their outputs is useful)., • OSHA 30, NFPA 70E qualified person training, CPR/First Aid, and similar field safety certifications., • Prior experience as the qualifying master electrician of record for an electrical contractor, EPC, or developer. Soft Skills • Authoritative yet collaborative — able to hold the line on safety and code compliance with contractors, OEMs, and customers., • Strong problem-solver and cross-functional coordinator., • Meticulous documentarian who leaves a clear paper trail behind every site visit., • Comfortable operating autonomously as the on-site electrical authority., • Calm and effective under aggressive commissioning schedules. For US-Based Roles — What You’ll Get • Competitive base salary + annual performance-based bonus eligibility, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and company holidays, • Per diem eligibility while traveling to project sites For All Roles • Professional development and growth opportunities, • Opportunity to grow with a mission-driven team shaping the future of clean energy Equal Opportunity: ON.energy is committed to equal employment opportunity and to maintaining a work environment free of harassment, discrimination, or retaliation. Accommodations: If you need an accommodation during the application process, email recruitment@on.energy. Benefits vary by role and location and are subject to change. For US-based roles - What you’ll get: • Competitive salary + annual performance-based bonus eligibility, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and company holidays For Mexico-based roles - What you’ll get: • Competitive salary + annual performance bonus eligibility, • Christmas Bonus (Aguinaldo): 30 days, • Major medical expenses and life insurance, • Paid time off and holidays (per local policy) For all roles: • Professional development and growth opportunities, • Opportunity to grow with a mission-driven team shaping the future of clean energy, • Equal Opportunity: ON.energy is committed to equal employment opportunity and to maintaining a work environment free of harassment, discrimination, or retaliation., • Accommodations: If you need an accommodation during the application process, email _, • Benefits vary by role and location and are subject to change.

Aypa Power, a Blackstone portfolio company, is a leading developer, owner, and operator of utility-scale energy storage and hybrid renewable projects that power our communities and cities. Our mission is to responsibly decarbonize the grid and make North American energy markets more affordable, sustainable, and efficient. Aypa is well-capitalized and uniquely positioned to lean forward on projects with well-suited deal structures to meet our customers’ needs. We have been at the forefront of energy storage development since our first energy storage project came online in 2018. As a leader in our industry, we have over 22 GW of utility-scale energy storage and hybrid renewable energy projects in development and 33 projects in operation or construction across North America. The Commissioning Manager will lead and coordinate commissioning activities across Aypa’s portfolio of utility-scale Battery Energy Storage Systems (BESS), Solar PV, and hybrid projects. This role is highly cross-functional, interfacing with construction, engineering, operations, and external vendors to ensure safe, timely, and compliant commissioning of assets. Responsibilities: • Lead commissioning efforts across multiple project sites, ensuring alignment with contractual, technical, and regulatory requirements;, • Collaborate with EPC vendors, OEMs, subcontractors, AHJs, and grid operators to plan and execute commissioning activities;, • Review and validate commissioning test results and documentation from contractors and vendors;, • Ensure completeness and accuracy of turnover packages;, • Create and maintain standardized commissioning templates and tools to streamline workflows and reduce repetitive effort;, • Work closely with Procurement, Pre-Construction, and Construction teams to review commissioning exhibits in contracts and support project execution;, • Travel to project sites during critical commissioning phases to oversee testing and troubleshoot issues;, • Support the handoff of commissioned assets to the Operations team, ensuring readiness and documentation compliance;, • Other duties as required or assigned. Key Qualifications: • 5 to 7 years of experience in commissioning of Utility Scale BESS, PV, and Hybrid projects;, • Bachelor’s degree in electrical engineering from a reputed/accredited university;, • Proven experience with system-level testing and field operations;, • Familiarity with ISO commissioning processes, such as ERCOT, CAISO, IESO and MISO, is a strong plus;, • Strong technical understanding of solar and energy storage systems;, • Strong understanding of SCADA and control systems as applicable to renewable energy plants;, • Ability to think on your feet, adapt quickly, and lead cross-functional teams;, • Experience managing contractors and coordinating with internal stakeholders;, • Proficiency with tools like Procore and commissioning software platforms;, • Familiarity with construction and design of BESS and PV projects. Compensation and Location: Salary: A base salary commensurate with experience; Bonus: An annual bonus will be awarded based on individual performance and the overall success of the business; Benefits: Aypa offers an attractive benefits package with excellent health care/dental/vision, 401k matching, unlimited vacation, paid parental leave, and other health/wellness benefits; Location: Remote (USA). The ability to work in the United States is a requirement; Travel: Up to 30%, within the USA and Canada. At Aypa, we nurture and support a highly diverse team and actively seek to advance fair and inclusive practices in all aspects of what we do. We hire passionate, dedicated, and forward-thinking individuals from different backgrounds and value unique perspectives and experiences. With a focus on belonging, we are committed to providing an inclusive environment for all. Please note: We kindly request that recruiting companies and agencies refrain from contacting us regarding this job posting. We appreciate your understanding and cooperation in respecting our hiring process. Thank you.

GS Power Partners is a developer, financier, owner and operator of distributed generation (DG) commercial and industrial and community solar projects across the United States. Since the company’s founding in 2015, GS Power Partners has been fully focused on project development in the North American DG solar sector. The company is backed by CVC DIF, a global investment firm with almost $20 billion in assets under management. The company maintains a portfolio of 300+ megawatts of operating projects, mainly concentrated in the Northeast and Midwest. GS Power Partners advances the clean energy transition through responsible investments and long-term partnerships. Position Overview The Field Service Engineer is responsible for executing preventive maintenance (PM), corrective maintenance (CM), troubleshooting, and repair activities across utility-scale photovoltaic (PV) solar facilities owned and operated by GS Power Partners. This role ensures optimal plant performance, availability, and reliability by diagnosing system issues, performing electrical and mechanical repairs, and supporting continuous improvement initiatives within the internal O&M organization. The position requires strong technical expertise in PV systems, medium-voltage equipment, inverters, trackers, SCADA, and balance-of-plant equipment, along with the ability to respond quickly to operational issues impacting plant generation. This position also requires up to 90% travel in the Syracuse area. Key Position Responsibilities Include Preventive Maintenance Execute scheduled preventive maintenance activities to maintain system performance and reliability: • Perform routine inspections and preventive maintenance on:, • PV modules and arrays, • Central and string inverters, • Combiner boxes and DC wiring, • Medium voltage transformers, • MV switchgear and reclosers, • Tracking systems and motors, • SCADA and communication systems, • Weather stations and sensors, • Conduct thermographic inspections of electrical equipment and PV arrays, • Perform torque checks, insulation resistance testing, IV curve tracing, and ground fault testing, • Inspect mechanical components including tracker drive systems, bearings, linkages, and foundations, • Verify proper operation of plant protection systems and monitoring equipment, • Maintain detailed maintenance documentation within the company’s Corrective Maintenance Management System (CMMS) Corrective Maintenance & Troubleshooting Diagnose and repair system faults to restore plant availability: • Respond to plant alarms and performance issues identified through SCADA monitoring, • Troubleshoot faults in:, • Inverter systems, • Combiner boxes, • DC circuits, • Medium voltage distribution, • Tracker control systems, • Communication networks, • Perform component replacements including:, • Inverter power stacks, • fuses, relays, breakers, • sensors and communication hardware, • Diagnose ground faults, arc faults, communication failures, and power quality issues, • Coordinate with OEM technical support when advanced troubleshooting is required, • Conduct root cause analysis for recurring failures Plant Performance & Reliability Support performance optimization and reliability engineering: • Monitor plant performance metrics such as availability, PR (Performance Ratio), and energy yield, • Identify underperforming arrays or equipment, • Support corrective action plans to improve plant reliability, • Participate in failure trend analysis and predictive maintenance initiatives, • Recommend system improvements to enhance operational efficiency Safety & Compliance Ensure safe work practices and regulatory compliance: • Follow all company HSE policies, Lockout/Tagout procedures, and electrical safety protocols, • Conduct Job Hazard Analyses (JHA) prior to maintenance activities, • Maintain compliance with OSHA, NFPA 70E, and company electrical safety standards, • Ensure proper use of personal protective equipment (PPE), • Participate in incident investigations and safety audits Documentation & Reporting Maintain accurate operational records and reporting: • Record maintenance activities in CMMS, • Document equipment failures and repair actions, • Generate service reports and maintenance logs, • Track spare parts usage and inventory needs, • Provide technical feedback to engineering and asset management teams Preferred Qualifications and Experience • 10+ years of experience in energy asset management, operations, or engineering, • Proven leadership experience in a technical or operational management role, • Strong knowledge of energy infrastructure (e.g., solar PV, wind, storage, grid systems), • Experience with asset management software (e.g., SynaptiQ, SAP, Maximo, Power BI, etc.), • Excellent analytical, organizational, and communication skills, • Experience with international portfolios or utility-scale renewable projects, • Familiarity with ESG and sustainability metrics related to asset performance, • Professional certifications (e.g., PMP, CMRP, ISO 55000), • 3 to 7 years of experience in power generation maintenance, solar O&M, or electrical field service, • Experience working with utility-scale PV plants (preferred), • Experience troubleshooting inverters, MV equipment, and SCADA systems Education & Preferred Certifications • Bachelor’s degree in electrical engineering, Renewable Energy Engineering, or related technical field OR • Technical degree with equivalent field experience in power generation or solar O&M, • NABCEP PV Installation Professional or PV Technician, • OSHA 30 Construction, • NFPA 70E Electrical Safety, • Medium Voltage Switching Certification, • First Aid / CPR / AED Physical Requirements • Capability to work outdoors in extreme weather conditions, • Potential to walk long distances across solar sites, • Ability to lift 50 lbs. or more, • Competence to climb ladders and work at heights, • Willingness to travel between solar sites as required, • Ability to work on-call rotations for plant outages or emergencies Position Location • The Field Service Engineer position will be based remotely, with travel, up to 90% of the time in the Syracuse area Compensation GSPP offers competitive compensation and a comprehensive benefits package, including health insurance, 401k and paid time off.

Benefits: • 401(k) matching, • Bonus based on performance, • Dental insurance, • Flexible schedule, • Health insurance, • Opportunity for advancement, • Vision insurance, • Wellness resources We are seeking a motivated and results-driven Solar Sales Representative to join our growing team. In this role, you will be responsible for generating leads, conducting consultations, and closing sales for our solar energy products and services. You will educate potential customers about the benefits of solar energy and help them make informed decisions about their energy needs. Key Responsibilities: • Generate leads through various methods including cold calling, door-to-door canvassing, networking, and referrals. • Conduct in-home or virtual consultations to assess customer needs and present tailored solar solutions. • Educate customers on the benefits of solar energy and how it can save them money and reduce their environmental impact. • Prepare and present quotes, negotiate terms, and close sales. • Follow up with customers to ensure satisfaction and generate referrals. • Stay up-to-date with industry trends, products, and competitors. Qualifications: • Proven experience in sales, preferably in the solar industry or a related field. • Strong communication and interpersonal skills. • Ability to build rapport and trust with customers. • Self-motivated and goal-oriented with a passion for renewable energy. • Excellent negotiation and closing skills. • Ability to work independently and as part of a team. • Valid driver’s license and reliable transportation. How to Apply: If you are passionate about renewable energy and have a proven track record in sales, we would love to hear from you! Please submit your resume and a cover letter outlining your relevant experience and why you are a great fit for this role to support@ae-nv.com. Compensation: $65,000.00 - $150,000.00 per year Accel Electric is focused on Exceeding Expectations in the Electrical Industry We are more than an electrical services provider; we are innovators and pioneers dedicated to making a real difference. With a focus on both residential and commerical lighting, we're not just performing tasks—we're empowering homes in the Las Vegas area to harness their own power, paving the way for a greener future. Our commitment to exceeding expectations is about more than just expertise; it's about applying our knowledge to help you make informed decisions and take meaningful steps towards sustainability, like installing EV charging stations, upgrading to LED lighting, electrical panel upgrades, and harnessing solar energy. With Accel Electric, you're choosing a partner committed to innovation, initiative, and making a tangible impact.

What We Do At Terabase Energy, we believe that digitalization and automation will drive the next wave of innovation and cost reduction in large scale solar. To fully unlock the potential of this opportunity, Terabase is developing an interconnected software and construction automation platform. We work alongside project developers, owners, and engineering & construction firms to support the design, optimization, and construction of huge solar projects around the world. Our team is a blend of solar-industry veterans and newbies, thought-leaders, dreamers, software, electrical and mechanical engineers, coders, product managers, project managers, and sales and marketing professionals. We are based in Northern California, with several other offices in the United States and around the world. If all this piques your interest, we’d love to hear from you! Position Summary As a Senior Project Manager on the Terabase Construct Operations team, you will report to the Director, Operations & Delivery and work closely with a team of Project Managers, Data Analysts, and Capture Technology Operators. This role involves close collaboration with customers, subcontractors, a global data analyst team, and various stakeholders to ensure the Construct product is implemented and delivered effectively within scope, time, and budget constraints. You will be responsible for overseeing and optimizing the day-to-day operations of our utility-scale solar energy project management software, including customer relationship management and engagement. Your scope includes managing a portfolio of projects for key customers which involves regular interface through weekly meetings and project site visits in the field, developing customized deliverables such as weekly progress reports. Additional scope includes performing quality control functions of project artifacts and other deliverables, management and upkeep of project data, product development and design reviews, and other day-to-day project tasking. You should demonstrate a meticulous approach to tasks, ensuring accuracy and thoroughness in all aspects of work, from data entry to project execution, to maintain high-quality standards and minimize errors. Responsibilities Daily Project Operations • Customer Engagement: Support customer engagements, from booking to delivery, demonstrating operational excellence resulting in delighted customers., • Project Planning and Execution: Develop comprehensive project plans that define scope, schedule, budget, and resources. Manage project lifecycle stages from initiation, planning, execution, monitoring, and closure., • Stakeholder Management: Serve as the primary point of contact for customers, subcontractors, and internal teams, facilitating clear and effective communication throughout project phases and managing stakeholder expectations., • Project Controls: Monitor and control project costs & schedules to ensure projects are delivered per budgetary constraints and on-time per project milestones. Prepare cost estimates, track expenses, and work with finance teams to report on financial status., • Quality Control: Ensure that all project deliverables meet quality standards, are free from errors, and delivered in a timely manner per customer contract service level agreements. Oversee development and delivery customer deliverables, addressing issues and ensuring performance requirements are met., • Compliance and Standards: Ensure all projects adhere to the appropriate regulatory guidelines, industry standards, safety regulations, and company policies. Work with stakeholders and technical teams to maintain regulatory requirements., • Documentation and Reporting: Maintain accurate project documentation, including schedules, budgets, progress reports, and change orders. Report regularly to senior management on project status, risks, and issues., • Team Coordination: Lead cross-functional teams, including engineers, technicians, and subcontractors, to ensure alignment on project goals and objectives. Provide direction, delegate tasks, and facilitate collaboration., • Risk Management: Identify potential project risks and implement mitigation strategies to minimize impact. Adjust project plans as necessary to respond to changes and address risks., • Project Contracting & Negotiation: Collaborate with Legal and Sales to review & revise contract terms, identify potential risks & develop mitigation plans, support customer negotiations, and the execution of contracts. Process Improvement & Product Development • Identify and address gaps in processes and procedures, resulting in improved, streamlined workflows., • Collaborate with other departments on operational requirements needed to meet customer deliverables and departmental priorities., • Maintain a complete understanding of our products and services., • Identify and promote changes in Terabase's technology stack to increase operational efficiency., • Lead structured project reviews and contribute to the development of company-wide lessons learned including the documentation, education, and implementation of project learnings across teams. Customer Success • Serve as the face of Terabase for a portfolio of projects across key customers and manage the experience throughout the life of the engagement., • Interface & engagement with senior leadership and executive-level customers to lead strategic initiatives such as project execution workshops and other execution-focused discussions to improve overall experience, • Work in partnership with the sales team to provide expanded services and support organic growth within existing accounts., • Act as a voice of the customer by representing their perspectives and interests in areas such as product roadmap, technical support, quality, etc., • Maintain the relationship to enable effective & active communication and a collaborative environment with the customer team to manage a variety of situations including conflict resolution, addressing complex & technical topics, and understanding when to seek leadership support to ensure the customer receives the proper level of care., • Perform and deliver a customer-centric experience ensuring every aspect of the project is managed such that Terabase becomes an extension of the customer’s project management team. Strategic Initiatives & Teams • Serve as a mentor for more junior Project Manager team members offering guidance, support, and coaching to strengthen the overall team’s capabilities and implementation of lessons learned., • Serve as a collaborative partner to the leadership team with operational enhancements, identification of improved or new tools and processes, and other improvements, • Cross-functional / cross-team operational project planning & execution to support & manage the deployment of multiple products on any given assigned project(s), • Provide performance feedback to management for PMs and lead working groups focused on process standardization and improvement. Minimum Qualifications • Bachelor’s degree in engineering, business management, energy, or related field., • PMI Project Management Professional (PMP), PgMP (Program Management Professional), or PMI-ACP certification(s)., • 7+ years’ experience working as a project or operations manager in the solar or renewable energy industry, heavy construction, or aerospace industry., • Excellent time management and ability to execute multiple projects across multiple customer relationships simultaneously., • Strong communication, customer relationship skills, and ability to communicate effectively and interact within a team environment., • Advanced or expert skill level in MS Suite of software (Outlook, Excel, PowerPoint, etc.), • Experience working with project management tools and platforms such Cora, Wrike, Katana, Project Insight, Primavera P6, JIRA and other Atlassian tools such as Confluence., • Experience leading a small team and working with remotely distributed contractors., • Willing to work in Hybrid (Home/Office) setup and work with minimal supervision., • Travel up to 40% of the time, primarily US-based project sites Preferred Qualifications • Master’s degree in a related field such as engineering, project management, operations, or otherwise., • Experience and knowledge of PV plant components such as PV modules, trackers, inverters, HV systems, Wind, and BESS (battery energy storage systems)., • Familiar with Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) software. Compensation And Benefits Our salary ranges are determined by role, level, and location. Within each posted range individual pay is determined (and may be greater or higher) dependent on work location and additional factors, including job-related skills, experience, and relevant education or training. Terabase offers competitive compensation along with a comprehensive benefits package including: • Generous time off and holiday policy, • Remote flexibility, • Flexible time off, • Comprehensive benefits package, • Career progression, • 401k match, • Stock options, • Home office set up allowance, • And much more! Terabase is an equal opportunity employer. We recruit, hire, employ, train, promote, and compensate individuals based on job-related qualifications and abilities. We strongly encourage people of all backgrounds to apply. We do not discriminate for any reason including race, color, sex, gender, age, religion or religious creed, national origin, ancestry, citizenship, marital status, sexual orientation, gender identity, gender expression, genetic information, physical or mental disability, military/ veteran status, or any other characteristic protected by law. We offer a welcoming and inclusive environment in service to one another, our products, the diverse consumers we represent, and the communities we call home. Principles only. This role is not open to receiving agency candidates, and any contingent submissions will not be considered. Terabase Energy does not utilize third-party recruitment agencies. Please contact our Recruiting team at careers@terabase.energy with any staffing-related inquiries.

What We Do At Terabase Energy, we are revolutionizing the solar industry through digitalization and automation. Our interconnected software and construction automation platform is designed to enhance the way large-scale solar projects are designed, optimized, and constructed. Collaborating with project developers, owners, and engineering & construction firms, we strive to create cutting-edge solutions that drive down costs and improve efficiency in solar energy deployment. Our diverse team comprises industry veterans, innovators, engineers, coders, and business strategists who are dedicated to this cause. Based in Berkeley, California, Terabase Energy is on an exciting growth trajectory, expanding its presence both nationally and internationally. Position Summary: We are seeking an experienced Senior BESS Controls Developer to join our team of skilled professionals dedicated to delivering cutting-edge energy management solutions. This individual will play a key role in developing and optimizing EMS software to enable seamless integration of energy assets such as Battery Energy Storage Systems (BESS), renewable energy sources, and grid interfaces. The role combines hands-on EMS controls development expertise with a strategic focus on product lifecycle management. The Senior BESS Controls Developer will lead the design, development, and deployment of advanced EMS solutions tailored to renewable energy and storage systems. This position will involve working with multidisciplinary teams, managing product development pipelines, and ensuring compliance with grid codes and customer requirements. Key responsibilities include software design, system optimization, and field validation, along with active collaboration with hardware, software, and business teams to ensure the delivery of best-in-class energy management products. Key Responsibilities: Energy Management System (EMS) Development: · Architect, design, and develop EMS software for renewable energy assets, including real-time control and optimization. · Integrate EMS solutions with SCADA platforms and third-party systems for seamless data communication and operational efficiency. Product Development and Lifecycle Management: · Lead the EMS product development lifecycle from concept through deployment and maintenance. · Define product requirements in collaboration with internal teams and external stakeholders. · Ensure compliance with relevant industry standards, protocols, and grid codes. Control Systems Optimization: · Develop control algorithms for EMS to enhance operational efficiency, reliability, and grid stability. · Implement advanced functionalities such as load forecasting, demand response, and optimal dispatch. Collaboration and Leadership: · Collaborate with software and hardware engineers, project managers, and business development teams to align on technical solutions. · Mentor junior engineers and support knowledge-sharing initiatives within the team. Testing and Deployment: · Perform simulations, Hardware-in-the-Loop (HIL) testing, and field validation of EMS functionalities. · Troubleshoot and resolve technical issues during deployment and operations. Innovation and Continuous Improvement: · Stay updated on industry trends, emerging technologies, and market demands. · Drive innovation and process improvement initiatives to maintain a competitive edge. Educational Background: · Bachelor’s or Master’s degree in Electrical Engineering, Computer Science, or related fields. Experience: · 7-10+ years of EMS development experience, preferably in renewable energy, BESS, or grid-tied systems. · Proven track record in product development and deployment. Technical Skills: · Expertise in control algorithms, power systems modeling, and EMS software architecture. · Strong programming skills in Python, Java, or similar languages. · Experience with communication protocols (e.g., Modbus, DNP3, IEC 61850). · Familiarity with SCADA systems, databases, and cloud-based solutions. Soft Skills: · Strong analytical and problem-solving abilities. · Excellent verbal and written communication skills. · Team-oriented mindset with leadership capabilities. Certifications (Preferred): · Certified Energy Manager (CEM), Professional Engineering (PE) license, or equivalent. Compensation And Benefits Our salary ranges are determined by role, level, and location. The salary range for this role will be $130,000- $160,000. Within each posted range individual pay is determined (and may be greater or higher) dependent on work location and additional factors, including job-related skills, experience, and relevant education or training. Terabase offers competitive compensation along with a comprehensive benefits packag,e including: • Join a passionate and collaborative team building industry-first technology, • Generous time off and holiday policy, • Remote flexibility, • Flexible time off, • Comprehensive benefits package, • Career progression, • 401k match, • Stock options, • Home officeset-up allowance, • And much more! Terabase is an equal opportunity employer. We recruit, hire, employ, train, promote, and compensate individuals based on job-related qualifications and abilities. We strongly encourage people of all backgrounds to apply. We do not discriminate for any reason including race, color, sex, gender, age, religion or religious creed, national origin, ancestry, citizenship, marital status, sexual orientation, gender identity, gender expression, genetic information, physical or mental disability, military/ veteran status, or any other characteristic protected by law. We offer a welcoming and inclusive environment in service to one another, our products, the diverse consumers we represent, and the communities we call home. Principles only. This role is not open to receiving agency candidates, and any contingent submissions will not be considered. Terabase Energy does not utilize third-party recruitment agencies. Please contact our Recruiting team at careers@terabase.energy with any staffing-related inquiries.

Ability to review the bid package for accuracy, completion, and electrical scope. Electrical Licenses (Journeyman, Master, etc. Since 1997, Blattner has focused on renewable energy solutions and is responsible for some of the most significant solar, wind and storage projects in the U.

Job DescriptionAbout Us Greenscape Energy is the fastest-growing green solutions provider in the DMV. As a group of highly-trained professionals, the Greenscape team stands ready to meet the needs of our clients by providing state-of-the-art energy solutions for the rapidly-growing green industry. From engineering to installation, our team collectively ensures projects are completed according to specifications, with excellence and on time. Greenscape provides on-going training to each employee to keep them abreast of new green technologies, ever-changing methodologies in the construction industry with a primary focus on delivering the best solution available to each of our clients. At Greenscape we never forget that we are allowed the privilege of serving this market, because of our team! We provide competitive pay, excellent leave plans, and great benefits including a retirement plan with company match. About the Job The Project Manager is responsible for planning, overseeing and leading [commercial and/or residential solar construction] projects from ideation through completion. This position requires interaction with a range of internal and external stakeholders, [including clients, subcontractors, utility providers, AHJs (Authorities Having Jurisdiction), inspectors, and internal field crews,] most often managing several moving project parts simultaneously. The Project Manager ensures projects are completed safely, on time, within budget, and in compliance with all applicable building codes, electrical standards, and company safety policies. Duties and Responsibilities Include: • Determine and define project scope and objectives, • Predict and assign resources needed to reach objectives and manage resources in an effective and efficient manner in coordination with management personnel, • Negotiate and manage contracts with vendors, suppliers and subcontractors, • Coordinate and verify the delivery of materials and equipment to construction sites, • Coordinate efforts with clients for the overall completion of projects, • Identify, analyze and manage project risks, • Develop and manage a detailed project schedule and work plan based on established deadlines, • Organize and motivate project teams, • Analyze team scalability, • Provide project updates on a consistent basis to various stakeholders about strategy, adjustment and progress, • Utilize industry best practices, techniques, and standards throughout entire project execution, • Monitor progress and measure project performance to identify areas for improvement and make adjustments as needed, • Track project costs in order to meet budget, • Manage quality control in all project phases, • Adhere to all established project timelines and expected completion dates, • Inform clients of important project updates, • Work with administrative staff to resolve certain administrative issues, • Conduct employee conflict resolution as needed, • Ensure all project forms and documents are properly completed and filed, • Identify training programs to enhance the quality of employee performance, • Work with management to create and implement procedures and revise them as necessary to ensure efficiency, • Ensure client satisfaction, • Oversee on-site solar installation activities including racking systems, panel installation, inverters, electrical tie-ins, and commissioning., • Ensure compliance with OSHA standards, local building codes, NEC requirements, and company safety protocols., • Conduct regular job site visits to monitor safety, workmanship, and progress., • Coordinate inspections with local jurisdictions and utility interconnection approvals.], • Review construction drawings, electrical diagrams, and engineering plans for accuracy and constructability., • Monitor subcontractor performance and ensure adherence to contract terms and safety requirements., • Address field conditions and unforeseen site challenges (structural, electrical, weather-related, etc.)., • Ensure proper documentation of change orders and scope modifications., • Perform other related duties as assignedAbout You Required Skills, Knowledge and Abilities Personal Effectiveness • Effective time management, • Organized, • Great attention to detail, • Ability to adapt and make changes as necessary to achieve goal, • High comfort level working in a diverse environment Communication • Ability to communicate with all stakeholders effectively in oral and written form, • Promotes cooperation and commitment within a team to achieve goals and deliverables Cognition • Ability to solve problems creatively, • Actively looking for ways to help staff, clients and others, • Use of logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems Management • Ability to manage multiple projects simultaneously, • Promotes organizational mission and goals, and shows the way to achieve them. Lead teams to complete complex projects with high quality in time and in budget, • Strong understanding of construction sequencing, scheduling software, and cost control principles., • Working knowledge of electrical systems and solar PV systemspreferred. Educational Background and Work Experience • Must have at minimum of 2 years of experience in Project Management or related experience,, • Experience in construction or solar installation strongly preferred., • Bachelor's degree preferred; equivalent combination of education and experience, • Project Management Professional (PMP) certification preferred, • Valid Driver's License with acceptable driving record, • Proficient use of all Microsoft Office products, • Experience with construction management or scheduling software (e.g., MS Project,Monday.com, Site Capture, etc.) preferred.Physical Requirements of the Job, • Regularly required to sit, stand, walk, climb stairs and ladders, and traverse uneven terrain at active construction sites., • Ability to lift and/or move up to 25–50 pounds occasionally., • May be required to work at heights and on rooftops., • Exposure to outdoor weather conditions including heat, cold, wind, rain, and direct sunlight., • Exposure to construction site conditions including dust, noise, moving mechanical parts, and electrical systems., • Must be able to wear required personal protective equipment (PPE) including hard hat, safety glasses, high-visibility vest, gloves, and fall protection equipment when required., • Travel to job sites required; may involve local or regional travel.

CONSTRUCTION PROJECT MANAGER - Heavy Civil Terra Constructs is seeking a Construction Project Manager with a desire for opportunity and growth.The Project Manager will provide leadership and serve as the liaison between project members and the client to always ensure promotion of both the business a

The KPMG Advisory practice is at the forefront of transformation, offering excellent opportunities for individuals to advance their careers and expertise with KPMG.Looking ahead, we anticipate continued evolution and success within the practice, fostering both personal and professional development,

This job is with LexisNexis® Risk Solutions, an inclusive employer and a member of myGwork – the largest global platform for the LGBTQ+ business community.Please do not contact the recruiter directly.LexisNexis Risk Solutions is the essential partner in the assessment of risk.Within our Governmen

The KPMG Advisory practice is at the forefront of transformation, offering excellent opportunities for individuals to advance their careers and expertise with KPMG.Looking ahead, we anticipate continued evolution and success within the practice, fostering both personal and professional development,

The Institute of International Education (IIE) is hiring an Outreach & recruitment Project Manager for the Boren Awards funded by the Defense Language and National Security Education Office (DLNSEO).We invite you to join a team united by our mission to help people and organizations forge brighter fu

Celebrate 100 years in business with us in 2025! At American Pest, we celebrate diversity and welcome individuals from all walks of life to join our team.We hire great people from a wide variety of backgrounds, not just because it's the right thing to do, but because it makes our company stronger.Ar

Overview Want to Join the Best in Pests? Go Pro with Orkin.As an Orkin Pro, you’ll put the "pro" in protecting what people value most: their home.You’ll have more than a job—you’ll have a career with growth potential and benefits that go beyond the basics.This includes a company vehicle, com

At American Pest, we believe great teams are built by people who value responsibility, consistency, and doing the right thing every day.We welcome individuals from all walks of life and hire from a wide range of backgrounds, not just because it's the right thing to do, but because diverse experience

Overview Want to Join the Best in Pests? Go Pro with Orkin.As an Orkin Pro, you’ll put the "pro" in pro tecting what people value most: their home.You’ll have more than a job—you’ll have a career with growth potential and benefits that go beyond the basics.This includes a company vehicle, co

Audio Visual Break-Fix Technician in Washington DC.This role involves providing onsite service support to clients, troubleshooting complex AV systems, and ensuring effective customer relations.Candidates must have direct experience with professional AV equipment and customer service skills.The compe

Program Management Specialist, Project Manager, Senior Cybersecurity Task Order Project Manager Interconnection Manager - Distributed Solar Energy Washington DC-Baltimore Area $140,000. Strong understanding of state and local building codes including Uniform Building Code, and electrical and plumbin

Coast Medical Service is seeking a travel Electrophysiology Technician for a travel job in Washington, District of Columbia.Job Description & Requirements.Coast Medical Service is a nationwide travel nursing & allied healthcare staffing agency dedicated to providing an elite traveler experience for

A staple in the fencing industry for over 70 years is seeking a skilled Project Manager to join their growing operation! This Jobot Job is hosted by: Ryan Anderson Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume.Salary: $100,000 - $140,000 per year A bit

Serve Robotics in Washington, DC, is looking for a Service Technician I to support fleet reliability through preventive maintenance and diagnostics on delivery robots.This entry-level position is ideal for technicians with foundational technical skills, aimed at ensuring fleet uptime and customer sa

Assistant Project Manager – Mission Critical Construction | Fast-Track Your PM Career This Jobot Job is hosted by: Bradley Clark Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume.Salary: $90,000 - $110,000 per year A bit about us: Our client is a well-es

Large Nationwide Commercial Roofing Contractor Seeking Strong PM's - not for the faint of heart!!! This Jobot Job is hosted by: Sam Kippen Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume.Salary: $100,000 - $140,000 per year A bit about us: We’re a larg

DMV Based GC seeking an Assistant Project Manager for large Commercial Projects $20M+ (Healthcare, Libraries, Schools, Multifamily) in the Washington DC area.All Local Work! This Jobot Job is hosted by: Jennifer Smith Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us

Position Title Floor Service Technician Job Description Purpose & Scope: The Environmental Services Floor Technician performs Environmental Services duties and floor care per department policies and procedures, and in accordance with Infection Control standards.In addition to these duties, the Envi

Bachelors or Masters of Science in Electrical Engineering or Architectural Engineering 3-5+ years Commissioning / Energy-related experience Working knowledge of Electrical Building Systems, Lighting, Power, BAS, and Controls Systems Certifications Desired, EIT, PE, CEM, CCP, CPMP, BEAP, LEED AP is h

Diagnose and repair problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc. HVAC repair, Plumbing, Electrical, and General Maintenance repair work.

Why join us? BENEFITS Competitive Salary & Bonuses! 401K Match Full Benefits Package! Flexible Work Schedules! Meaningful Work! Accelerated Career Growth! Job Details Electrical Engineer EIT/PE - Active Security Clearance or Eligible Mid and Senior Level Positions Available - $120 - $170K We are See

What You'll Do Diagnose, repair, and maintain mechanical, electrical, and welding systems Perform routine and preventive maintenance on a variety of equipment Troubleshoot electrical and mechanical components, including control systems Assemble, disassemble, clean, lubricate, and replace machine

Project Manager Opportunity with Leading National Commercial General Contractor in the DC/Maryland Area, ESOP, Profit Sharing and Extensive Opportunities for Growth! This Jobot Job is hosted by: Ben Kimbrel Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume

CACI is looking for a Journeyman Electrician to provide technical support at the Naval Surface Warfare Center Carderock Division (NSWCCD) for the electrical maintenance, repair, upgrade, and operation of industrial-level test equipment, fixtures, and facilities in support of the Test and Evaluation

Engie is hiring a Power Plant Maintenance Mechanic in Washington, DC to execute inspections and maintenance on their combined Heating and Power plant's mechanical equipment.The ideal candidate will have a high school diploma and at least four years of related experience.This position requires onsite

Dover - South Chesterfield Road - Responsibilities: Assemble component parts into subassemblies and completed units; Inspect parts using gauges and calipers; Perform end-of-line product checks and repairs; Notify/communicate with assemblers, leads, and supervisors on specifications; Assist assembly

Qualifications## Required Skills and Abilities Treats all current and future residents with the highest level of concern and care; demonstrates a natural disposition towards personal and public safety; operates from a place of integrity, honesty, and ethics Familiarity with local, state and fe

Dover - South Chesterfield Road - Responsibilities: Read and comprehend an A order; Identify parts used on assigned product line and their placement location; Perform assembly-type functions using hand or power tools; Read rulers, tape measures, and other measuring instruments; Fasten parts together