Solidworks jobs in Alexandria, VirginiaCreate job alerts

Title: Electro-Mechanical Engineer Location: Springfield, VA Contract long-term Job Description & Skill Requirement: Key Responsibilities • Design 300 mm wafer chucks including vacuum chucks, edge grip mechanisms, compliant fingers, and kinematic supports., • Perform stress, deformation, and warp accommodation modeling to ensure ultra low wafer stress during handling., • Develop motion mechanisms for raise/lower (Z axis) and edge grip actuation that prevent wafer damage and meet precision requirements., • Ensure all designs meet ISO Class 1 cleanroom particle generation specifications and support high volume, 24/7 fab operation., • Select appropriate low outgassing, non particulating materials (e.g., PEEK, Vespel, Alumina, DLC, etc.) and coatings suitable for semiconductor tools., • Work with controls engineers on soft landing, jerk limited motion profiles, and closed loop sensing for wafer presence, alignment, and force control., • Conduct FEA simulations for thin wafer stress, contact mechanics, modal behavior, and static/dynamic loads., • Perform particle testing, vacuum leak testing, wafer stress validation, and endurance testing., • Generate engineering documentation: DFMEA, test plans, tolerance stackups, and SEMI/ISO compliance documents., • Collaborate with cross functional teams (systems, electronics, materials, manufacturing) for prototype builds and tool integration. Technical Skills • 300 mm wafer handling design (edge grip, vacuum, kinematic support), • Precision chuck design & compliant mechanisms, • FEA (ANSYS, Abaqus, COMSOL) — stress, modal, and contact analysis, • Modeling warped/bowed wafers, thin plate mechanics, • Cleanroom design principles – ISO Class 1, low particle mechanisms, • Vacuum system design, leak tight sealing, He leak testing Material selection for semiconductor tools: • PEEK, Vespel, PTFE, PPS, • Alumina, Aluminum Nitride, Ti 6Al 4V, • Hard anodize, DLC, TiN, Parylene coatings Motion system design: • Linear motors, voice coil actuators, pneumatic micro actuators, • Flexures, guides, cross roller bearings, • Jerk limited (S curve) motion and soft landing control, • Edge grip mechanism design with low clamping forces, • Tolerance analysis, GD&T, DFMEA, DOE, • Semiconductor standards familiarity: SEMI M1, M49, E57, E84, ISO 14644 Metrology & Testing Skills • Warp, bow, TTV measurement techniques, • Particle measurement and contamination control, • Vacuum integrity tests (helium mass spectrometer, pressure decay), • Wafer alignment and edge detection sensors (optical/capacitive), • Reliability testing for 24/7 fab duty Software Skills • CAD: SolidWorks, Creo, NX, • Simulation tools: ANSYS/Abaqus/COMSOL, • Data tools: MATLAB, Python, • Motion/controls: Beckhoff TwinCAT, Siemens/Omron PLCs Soft Skills • Strong cross functional collaboration, • Root cause analysis (8D, 5 Whys, Ishikawa), • Clear documentation & communication, • Ownership and design for reliability mindset

About the job Full job description • Build energy storage and delivery modules for plasma discharges (capacitor banks, gate drivers, IGBT/MOSFET circuits), • Design flyback, boost, and/or custom DC-DC converter topologies, • Create circuit protection schemes: overvoltage, arc suppression, crowbars, snubber circuits, and thermal cutoffs, • Optimize for mass, efficiency, satellite bus compatibility, and mission duration, • Implement fault detection, isolation, and recovery (FDIR) systems, including overcurrent shutdown, brownout protection, and safe-mode logic, • Perform high-current loop optimization and di/dt control for EMI suppression, • B. System Integration and Spacecraft CompatibilityEnsure proper interface with spacecraft EPS and onboard avionics (3.3V, 5V, 12V, and 24 V rails), • Prepare electrical harnessing plans and interface control documents (ICDs), • Ensure compatibility with propulsion structural design, thermal sinks, and EMI shielding, • Develop firmware for thruster state machine control (Safe → Arm → Fire → Shutdown), • Integrate watchdog timers and autonomous fault response mechanisms, • Support remote PPU activation and diagnostic monitoring via spacecraft OBC, • C. Test Infrastructure and Validation SupportAssemble test hardware for vacuum-compatible operations, • Support thrust testing campaigns of ABPT and MPD systems with PPU in the loop, • Build and support data acquisition tools, waveform capture, and a GUI for diagnostics, • Support EMI, bakeout, thermal/vibe, and TVAC testing of PPU boards, • Maintain design logs, BOMs, test procedures, and risk assessments, • Follow best practices for ITAR/EAR compliance and electrostatic safety, • D. Deliverables and TimelineQ1 2026-Q2 2026: Concept and subscale circuit validation for MPD pulsed power (~10 W–3 kW), • By Q3 2026: Full PPU prototype with thermal/EMI shielding for MPD integrated with thruster testing and CubeSat, • By Q4 2026: Support flight-hardware-ready PPU for MPD and HyABET, • Required Experience and Tools:MS/PhD in Electrical Engineering, Applied Physics, or related field, • 3+ years in high-voltage circuit design (preferably in aerospace, EP, or plasma systems), • Proficiency with LTspice, KiCad, Altium, SolidWorks, or equivalent tools, • Familiarity with EMI/EMC mitigation, high-voltage safety standards, and vacuum-compatible hardware and materials, • Hands-on lab skills with HV circuits, soldering, probes, HV safety, and oscilloscope diagnostics, • Experience with embedded coding (C/C++/Python), Microcontrollers, RF comms, • Hands-on experience with hardware debugging, serial protocols, and real-time systems, • Familiarity with AI/ML models for control systems, • Familiarity with RF and Microwave modelling (optional), • Familiarity with high-temperature materials and control algorithms, • Familiarity with IPC-2221/610, NASA EEE-INST-002, NASA-STD-4005, MIL-STD-1540/1541, and NASA GEVS required., • Experience designing electronics for vibration, thermal, vacuum, EMI/EMC, and radiation environments strongly preferred., • Professional development assistance, • Tuition reimbursement, • Parental leave, • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Employee discount, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Professional development assistance, • Referral program, • Relocation assistance, • Retirement plan, • Tuition reimbursement 401(k), Dental insurance, Medical insurance, Vision insurance Additional Job Application Terms This job is part of LinkedIn’s Full-Service Hiring beta program. Eligibility is limited to candidates located in and performing services in the United States, excluding those based in Alaska, Hawaii, Nevada, South Carolina, or West Virginia. We’re committed to making our hiring process as smooth and timely as possible, and we understand that waiting to hear back can add to the anticipation. If you’re a potential fit, our team will reach out within two weeks to progress you to the next stage. If you don’t hear from us in that time, we encourage you to explore other opportunities with our team in the future, and we wish you the very best in your job search.

Description Leidos currently has an opening for a Mechanical Design Engineer to work in our Arlington, Virginia office. This is a highly dynamic and integrative environment in which talented and creative engineers can thrive working on a diverse array of multidisciplinary projects in its Electronic Warfare Division. We are seeking a broadly trained and highly motivated engineer for advanced technology programs focused on mechanical engineering from research and development to productization. Primary Responsibilities: * Support applied research and engineering development of solutions and products in across various projects for land-based, airborne, and/or space applications. * Provide mechanical engineering leadership on new R&D and current designs as well as support existing products. * Work closely with the science and manufacturing departments to facilitate transition of innovative technology from the research stage to full production. * Own large aspects of the system and be flexible with tasking as the program evolves. * Work within a lab environment and be hands-on with hardware. Basic Qualifications: * Experience in electronics packaging designs including 3D modelling and thermal management. * Experience using SolidWorks, SolidWorks Simulation, and SolidWorks Flow * Experience with finite element analysis (FEA) and computational fluid dynamics (CFD) concepts * Experience working with cross functional development teams. Motivated self-starter able to work under minimal supervision * Demonstrated strong writing, presentation, and interpersonal skills * B.S. degree in Mechanical Engineering or related field from an accredited college/university with at least 4 years of experience as a mechanical design engineer * Secret Security Clearance with the ability to obtain a Top Secret Security Clearance. * Occasional travel is required Preferred Qualifications: * Experience in advanced electronics packaging, chip-to-ambient thermal resistance, thermal simulation and cooling. * Experience with thermal management of next generation heterogeneous integrated circuits, chip-centric cooling techniques in harsh environments, and/or radiation shielding. * Experience with modeling, analysis, and design of miniaturized electrical/mechanical components and assemblies. * Experience with rapid prototyping techniques including 3D printing * Knowledge of mechanical engineering concepts associated with airborne and satellite payload systems * Familiarity with VITA VPX Circuit Card Assemblies * Demonstrated leadership of small technical teams and projects * Masters degree in Mechanical Engineering or related field from an accredited college/university with at least 8 years of experience as a mechanical design engineer If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. February 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $87,100.00 - $157,450.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $65,000 - $100,000 per year A bit about us: Our client is a leading provider of clean energy products including smart battery systems, inverters, power converters, and building energy management solutions. They combine the pace and energy of a tech startup with the resources of a fast-growing Fortune 1000 company. We are seeking an experienced and adaptable Manufacturing Engineer to support our global product supply chain with engineering change management, technical drawing, 3D modeling, and communication with suppliers. The successful candidate will have experience with Solidworks, Product Lifecycle Management, sheet metal and plastics design for manufacturing, supplier quality evaluation, and contract manufacturing. Why join us? • Accelerated Career Growth!, • Competitive Base Salary and Bonus! Job Details Job Details: We are seeking a dynamic and experienced Welding Engineer to join our team. This is a permanent position in the manufacturing industry where you will be tasked with the responsibility of designing, implementing, maintaining, and improving welding applications. You will also be responsible for ensuring the highest quality of welding work is achieved and that it meets all the relevant safety and technical standards. Responsibilities: • Provide technical support to production staff and troubleshoot welding related issues., • Design and implement new welding processes or improve existing ones to enhance efficiency and profitability., • Conduct research and development activities to improve welding techniques, procedures, and applications., • Perform welding procedure and welder performance qualifications in accordance with required codes and standards., • Develop and implement welding standards and procedures to guide production and welding personnel in the manufacturing process., • Work closely with design and engineering teams to ensure the manufacturability of new designs and improve production processes., • Provide training and guidance to production staff on advanced welding techniques and technologies., • Collaborate with quality control teams to establish quality standards and specifications, and to ensure these standards are met., • Utilize CAD software to design and optimize welding fixtures and tooling., • Implement Lean manufacturing principles to improve efficiency and reduce waste., • Bachelor’s degree in Welding Engineering, Mechanical Engineering, or a related field., • A minimum of 2 years’ experience in a similar role within the manufacturing industry., • Strong knowledge of welding processes, procedures, and safety standards., • Proficiency in CAD software., • Experience with Lean manufacturing principles., • Experience with robotic and laser welding., • Ability to read and interpret blueprints and engineering plans., • Excellent problem-solving skills and attention to detail., • Strong communication and interpersonal skills., • Ability to work in a fast-paced, high-pressure environment., • Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification would be an advantage. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Work Arrangement This is an onsite position in Tampa, FL, Huntsville , or Northern, VA. Job Overview The Senior Electrical Engineer position plays a crucial role in designing, developing, and maintaining electrical systems, components, and leading larger projects. As a Senior Level position, ownership of larger projects and leadership of teams will be expected. This key player will combine technical expertise, leadership, and problem-solving skills to design, implement, and maintain electrical systems such as vehicle avionics, battery and power subsystems, radio communication systems, navigation, and computer vision systems, etc. Essential Functions • Design, develop and test electrical systems and equipment for military, industrial, commercial, and consumer use related to Unmanned Systems (UAVs, UGVs, USVs) of various types., • Oversee the selection of components and equipment based on analysis of specifications and reliability and determines design approaches and parameters., • Collaborate with avionics, embedded systems (microcontrollers, FPGAs, Single Board Computers etc…), and Radio Frequency (RF) links. Supports Flight Test operations, as needed., • Develop and maintain electrical control systems, including wiring diagrams and schematics., • Lead design reviews, integration events, and flight test readiness activities, • Analyze and interpret technical data, such as specifications, blueprints, and schematics, to ensure compliance with applicable codes and regulations. Familiarity with military standards related to reliability and safety., • Collaborate with and lead teams of other engineers, technicians, and clients to identify and resolve technical issues and improve system performance., • Plan and oversee the installation, operation, maintenance, and repair of electrical systems and equipment., • Troubleshoot electrical problems and provide technical support to production staff as needed., • Lead internal R&D efforts, and aid in the transition of these efforts into production, • Develop and implement quality control processes to ensure product reliability and performance., • Lead rapid prototyping, system bring-up, and hardware-in-the-loop (HIL) testing, • Lead customer funded efforts, and aid in the transition of these efforts into production., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications • Extensive knowledge of common industry protocols (LVDS, I2C, HDMI, UART, SPI, CAN, USB, MIPI), • Extremely knowledgeable in circuit design with knowledge of embedded microcontrollers, video image processing, battery technology, motor controllers, and power distribution., • Strong knowledge of electrical design software for schematic capture and PCB layout (Altium (Preferred), Eagle PCB, Autodesk Fusion360, KICAD, etc...), • Strong knowledge of electrical simulation tools such as LTspice, • Knowledge of Radio Frequency (RF) simulation tools such as ANSYS HFSS or CST Microwave Studio is beneficial., • Strong MCAD skills with Autodesk Fusion360 and/or SolidWorks are beneficial., • Familiarity with gas and battery-powered Unmanned Aerial Vehicles (UAVs) and associated avionics and electronics such as IMUs, AHRS, BLDC motors, etc..., • Strong knowledge of embedded processors such as ARM, and embedded programming skills therein with C/C++, • Test and Debug abilities with common lab equipment including DMMs, Oscilloscopes, Spectrum Analyzers, Vector Network Analyzers, Logic Analyzers, etc..., • Ability to work independently and as part of a team, • Good leadership skills including managing a team through software such as Jira, • Ability to problem solve at a high level and carry out a vision by leading a team into appropriate technical solutions, • Bachelor's degree in electrical engineering or a related field, • 9+ years of electrical enineering experience Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to sit, and to reach to use computers and other office equipment, • Frequently required repetitive movements of wrists, hands, and/or fingers Security Clearance • Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job DescriptionTHOR Solutions is actively seeking a highly motivated Lead Engineer to support marine engineering efforts for the U.S. Coast Guard, U.S. Navy, and commercial shipbuilding efforts in Arlington, VA. An ideal candidate will have prior experience leading teams working with Government or commercial shipbuilding programs, standards, and regulations. Typical Responsibilities: • Lead a multi-disciplined team of engineers and designers in creating ship installation drawings, 3d models, calculations, and engineering change artifacts., • Design, analyze, and integrate systems for ships and boats, including C5ISR, Combat Systems, propulsion, piping, HVAC, and machinery arrangements., • Prepare detailed engineering drawings, specifications, and technical documentation., • Collaborate with naval architects, structural engineers, electronics engineers, and production teams to ensure integration of systems., • Perform marine engineering calculations related to power, structure, fluid dynamics, thermodynamics, and/or machinery performance., • Support installation, testing, and commissioning of systems onboard vessels., • Conduct failure analysis, troubleshooting, and recommend design improvements. Typical Physical Activity: Primarily desk/computer work in an office environment. May involve: repetitive motion. Periodic visits to waterfront/shipboard environments. May involve: traversing shipboard environments (e.g., confined spaces, ladders, hatches) or vision. Anticipated Travel: This position is anticipated to require around 10% travel. Eligibility for a SECRET Security Clearance is Required: This position requires eligibility for a Secret security clearance, to be obtained after hire. Only U.S. citizens are eligible for a security clearance; therefore, only current U.S. citizens will be considered for this position. Required Knowledge, Skills, and Abilities: • Bachelor’s degree in Naval Architecture, Marine Engineering, Mechanical Engineering, Electrical Engineering, or another relevant technical, engineering, or a marine discipline from an ABET-accredited institution., • At least eight (8) years of progressive experience in naval architecture., • At least three (3) years of Project Management experience., • Experience with computer applications relating to shipboard systems., • Familiarity with USN, USCG, IACS and/or commercial ship design rules and regulations., • Experience with 3D CAD programs: AutoCAD, SolidWorks, Inventor, Rhino, or equivalent., • Experience with Project Management software such as Microsoft Project, Microsoft Planner, or Primavera., • Experience managing project sites and task lists in Microsoft SharePoint and Teams., • Proficient with common productivity software., • Ideal experience will have been obtained in U.S. Federal or commercial ship or boat building acquisition programs., • Experience with DoD ACAT I or DHS Level I shipbuilding programs or Naval Special Warfare Boats., • Paid Time Off (accrued), • Paid Holidays, • 401(k) with employer match and traditional/Roth options, • Medical Insurance (3 plan options) + TRICARE Supplemental Coverage, • Dental Insurance (2 plan options), • Vision Insurance Plan, • Healthcare and Dependent Care Flexible Spending Accounts, • Commuter/Transit Benefits, • Basic Life/AD&D, Short-Term and Long-Term Disability Insurance, • Supplemental Life Insurance, • Pet Benefits, • Legal Resources, • ID Theft Benefits, • Employee Assistant Plan and Work-Life Program, • Voluntary Leave Transfer Program, • Tuition Reimbursement Program Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran’s Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation’s most complex military, public sector and industry challenges. THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at or (571) 215-0077. Powered by JazzHR YCpGrhofmN

Job DescriptionAbout Shift5 Shift5 is building the data platform for onboard operational technology (OT). We deliver cybersecurity, predictive maintenance, and compliance capabilities that enable defense and commercial fleets to operate with greater readiness, resilience, and mission assurance. We are seeking a mission-aligned Systems Engineer to serve as the critical bridge between our core engineering teams and real-world tactical deployments. This role sits at the intersection of Platform Integration, Requirements Management, and Technical Execution and will play a critical role in supporting Shift5's next phase of growth. This is not a purely theoretical engineering role. It requires technical fluency in hardware/software integration, ownership of formal government artifacts (CDRLs/SDRLs), and the executive presence to serve as a primary technical interface for DoD customers and certification authorities. What You'll Do * Lead and execute the integration of Shift5 hardware into complex customer platforms, including cabling design and A-kit development. * Own the system-level technical baseline across assigned programs, ensuring all hardware and software meet rigorous compliance standards. * Partner closely with hardware, software, cyber, and integration teams to coordinate cross-discipline technical execution. * Drive measurable impact in program success by developing and managing formal systems engineering artifacts, such as V&V Plans and System Architecture documents. * Identify and act on opportunities to improve technical risk management and dependency tracking across the product lifecycle. * Navigate the complexities of government acquisition, supporting formal technical reviews like SRRs, PDRs, and CDRs. * Contribute directly to mission assurance by performing system-level analyses, including Weight & Balance, Electrical Loads, and FMECA. What Success Looks Like * Establish a strong technical foundation by mastering the Shift5 architecture and integrating with key stakeholders across the engineering organization. * Build organizational credibility by taking ownership of technical baseline documents and contributing to the design of platform-specific integration kits. * Drive high-quality technical delivery by leading the development and internal review of formal CDRL artifacts for government programs. * Improve system reliability and compliance by defining robust verification strategies and overseeing system-level testing to ensure airworthiness and safety standards are met. * Serve as a trusted technical authority for system-level decisions, independently managing requirements and providing clear technical positions to customer PMOs. What We're Looking For * Experience in systems, integration, or mechanical engineering (3+ years), ideally within the aerospace, defense, or high-reliability electronics sectors. * Demonstrated ability to interpret system schematics, generate detailed harness drawings, and manage requirements (SRDs, SRSs, ICDs). * Strong analytical and technical skills in configuration management, system-level analysis (FMECA, ELA), and CAD tools like SolidWorks. * Comfort operating in DoD environments and familiarity with environmental qualification standards such as MIL-STD-810, 461, and 704. * Bachelor's degree in Systems, Electrical, or Mechanical Engineering, or a related technical field. * Requirements: Ability to travel up to 25% to support customer site integrations and testing. Compensation & Benefits * Base Salary: $141,374 – $160,150 * Bonus program and equity in a fast-growing startup * Employer-paid medical, dental, and vision coverage * Health Savings Account with annual employer contributions * Life and Disability Insurance * Uncapped paid time off policy * Flexible work & remote work policy * Tax-deferred public transit benefits with Metro SmartBenefits (DC/MD/VA) Equal Opportunity Employer Shift5 is committed to equal employment opportunity and affirmative action. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. Privacy Policy and Notice for Shift5, Inc. Job Applicants, Employees & Contractors

Job Description Work Arrangement This is an onsite position in Tampa, FL, Huntsville , or Northern, VA. Job Overview A Mechanical Engineer 2 is responsible for designing, analyzing, and improving mechanical systems and components. Essential Functions • Support the planning and performing engineering research, design, and development in conformance with design, engineering, and customer specifications, • Identify and document requirement through customer interface, • Create and review Mechanical CAD drawings and component layout designs, • Create, review, and maintain assembly drawings for enclosures, circuit boards, internal and external cable assemblies, etc., • Design and support tooling, fixtures, and jigs for prototype builds, test, and low-rate production, • Apply DFx principles (DFM, DFA, DFS, DFR) to improve manufacturability, assembly, reliability, serviceability, and cost, • Support rapid prototyping (3D printing, composites, machined parts) and hands-on integration, • Assist with conducting tolerance analysis, basic structural trade studies, and environmental considerations, • Support build, integration, and flight test activities; rapidly troubleshoot mechanical issues, • Utilize industry and/or military specifications for Shock, Vibration, Temperature and Humidity requirements to develop and validate products, • Support the creation and maintenance of engineering documentation (drawings, user instructions, bill of materials, etc.), • Support manufacturing with aiding in work instruction generation, technical guidance on process settings and aid in development/implementation of new manufacturing test/build equipment as need, • Support production/fabrication by working closely with technicians on product build, • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications • Familiarity with 2D or 3D engineering design and manufacturing tools (e.g., AutoCAD, ProE or other), • Familiarity with GD&T and engineering drawing standards, • Familiarity with engineering analysis tools (ANSYS, ProMechanica or similar), • Proficient knowledge of Solidworks, • Detail oriented and capable with working in a team environment, • 3-6 years of mechanical engineering experience. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required repetitive movements of wrists, hands, and/or fingers Security Clearance • Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Senior Electrical Engineer/Designer Location is onsite in Springfield, VA. This is not a remote or hybrid position. PD Power Systems LLC is seeking a Senior Electrical Engineer/Designer responsible for designing electrical and control systems for electrical power generation and distribution systems and equipment. The candidate will work closely with Mechanical Designers and Engineers in integrating controls into the electrical systems. The candidate must be familiar with electrical power generation, distribution, and various control systems to include PLCs, generator digital controls, and human machine interfaces. Experience with 2D CAD is required, experience with 3D CAD is desirable. The position requires close teamwork with other employees in engineering as well as support, both within the company and with subcontractors. Roles and Responsibilities • Prepare, edit and maintain electrical schematics, panel diagrams, cable assembles, and wiring drawings using AutoCAD software., • Create, maintain and troubleshoot PLC systems., • Be able to source components based upon customer requirements and specifications., • Education: 4-year Electrical Engineering degree with 10+ years of hands-on experience. OR, • Experience designing electrical control systems and power generation and distribution systems., • To include prototype builds, production builds, schematic designs, and troubleshooting and diagnosing system issues., • Experience using Microsoft Office (Word, Excel, PowerPoint), problem solving, technical documentation/communication., • Experience with electrical power from low voltage AC (120/208V) through medium voltage (15kV)., • Understanding electrical design techniques, circuit protections, and principals involved in development of electrical drawings for Technical Data Packages (TDP)., • Excellent verbal and written communication skills, problem solving abilities., • Ability and flexibility to travel domestically and internationally - up to 20%, • Medical, • Dental, • Vision, • 401(k) PD Power Systems is committed to the principle of equal employment opportunity for all employees and job applicants and to providing employees with a work environment free of discrimination and harassment. Employment decisions at PD Power Systems are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job Description STR is focused on delivering national defense capabilities by driving mission-focused strategies to develop advanced technology systems enabling enduring products and solutions focused on achieving the customer vision. Our programs deliver sustainable, reliable, and cost-efficient capabilities focused on end-customer needs that function in operationally relevant environments and timeframes. We offer a dynamic and challenging environment where your work directly contributes to national security. Our hardware labs are at the forefront of technological innovation, and as a Laboratory Manager, you will play a crucial role in maintaining this standard of excellence. We continue to grow and refine our laboratory operations, and this role will be involved in helping STR meet our future needs. If you are driven by a passion for making an impact, excel in a collaborative environment, and are dedicated to the pursuit of excellence, we invite you to apply to join our team. Position Overview: We are seeking an experienced hands-on Laboratory Manager to fill a dual role. You will oversee the efficient and safe operation of our hardware laboratory facilities, while also providing technical support to high-visibility programs. This pivotal role balances the immediate, tactical needs of the labs with our longer-term strategic goals, ensuring our labs are state-of-the-art to support our mission-critical projects. This includes supporting the growth and improvement of our lab operations through process development and implementation, continually improving the employee experience working in labs, making sure equipment is operating and calibrated, and projects have the space needed to work. This role will also support the assembly, test, and repair of electronic and electro-mechanical hardware. Key Responsibilities: • Coordinate and manage day-to-day activities within the laboratories, ensuring a clean, organized, and fully equipped environment for our team., • Support the development, implementation, and refinement of standard operating procedures. Monitor users for adherence, identify issues, and escalate resolution as necessary. Develop and administer training as appropriate., • Manage and monitor for adherence to safety and security protocols., • Maintain awareness of overall lab utilization, user needs, equipment status, regulatory changes, and advancements of laboratory practices., • Work with leadership to implement recommendations to maintain and improve laboratory operations., • Assign and manage floor, bench, and storage spaces to address program needs., • Aid in preparing space for program use (e.g., ensure benches and storage are available; power and network is suitable; ESD protections are in place)., • Aid in closeout of lab space on program completion (e.g., pack/return equipment; clean space)., • Manage inventory of materials and supplies (e.g., chemicals, gloves) and equipment (track status; coordinate maintenance, calibration, and repair; schedule use)., • Ensure equipment is properly used (e.g., verify function; conduct training or direct users to appropriate training)., • Ensure lab spaces meet expectations for cleanliness and safety; coordinate with cleaning service and conduct "quick cleans" as necessary., • Coordinate with EHS staff to ensure proper storage and disposal of chemicals and waste in accordance with appropriate regulations., • Facilitate permitting process to support tests (e.g., FCC permits)., • Maintain and manage access control (ensure personnel complete appropriate training, add/remove people as necessary)., • Assemble complex electro-mechanical systems that will be used in operational environments (e.g., electronic racks, mechanical modifications and assembly, cable and harness fabrication, installation, routing, and restraining)., • Support test activities under guidance from Engineering teams and/or conduct test routines independently. Typical test activities will be related to RF systems and can include trouble shooting and debugging., • Read technical design/drawing packages and implement into hardware leveraging industry best practices., • Create/revise/recommend changes to technical documentation and identify improvements for performance and/or manufacturability., • Apply familiarity and experience (e.g., certification) of electronics industry assembly standards such as IPC (Aerospace and Defense applicable standards preferred) and skills such as soldering, crimping, and power tools (drill press, saws, etc.), • Work/communicate with Engineering staff to understand design intent, communicate issues and corrective recommendations., • Work in a dynamic environment while applying/recommending best practices as appropriate. Accurately and completely document work activities to ensure design and manufacturing history is maintained., • Schedule flexibility to accommodate variations in program schedule and/or support multiple programs., • High school graduate and minimum 10 years of applicable and demonstrated experience in an R&D environment, preferably in fields related to RF, Radar, antenna, acoustic, and/or undersea products for Defense applications., • Experience managing lab operations as outlined above., • Experience building, testing, and delivering electro-mechanical hardware related to RF, Radar, antenna, acoustic, and/or undersea products., • Experience interfacing and communicating with Engineers and Scientists., • Existing certifications (e.g., IPC soldering) preferred or ability to obtain required certifications. Expired certifications are acceptable; however, skill set must have been applied within the last 3 years., • Familiarity with tools and parts used in assembly of electro-mechanical hardware, including but not limited to:, • Solder, soldering irons, and crimp tools, • Drill press, saws, and related power tools, • Bolts, nuts, washers, and related hardware, • Connectors, wires, shrink sleeving, and epoxies, • Experience with Microsoft tools (Word, Excel) and data management systems (Arena, SolidWorks PDM)., • Ability to stand, bend, and lift up to 50 lbs, • Occasional travel (<10% per year), • This position requires the ability to obtain a security clearance, for which U.S. citizenship is needed. Active Secret or Top Secret clearance preferred. Pay Information Full-Time Salary Range: $115,000-$140,000 The salary range listed is based on external market data. Offers are based on factors, such as but not limited to, the candidate's experience, education, training, key skills/critical skills, security clearances, and prevailing market and business conditions. STR is a growing technology company with locations near Boston, MA, Arlington, VA, near Dayton, OH, Melbourne, FL, and Carlsbad, CA. We specialize in advanced research and development for defense, intelligence, and national security in: cyber; next generation sensors, radar, sonar, communications, and electronic warfare; and artificial intelligence algorithms and analytics to make sense of the complexity that is exploding around us. STR is committed to creating a collaborative learning environment that supports deep technical understanding and recognizes the contributions and achievements of all team members. Our work is challenging, and we go home at night knowing that we pushed the envelope of technology and made the world safer. STR is not just any company. Our people, culture, and attitude along with their unique set of skills, experiences, and perspectives put us on a trajectory to change the world. We can't do it alone, though - we need fellow trailblazers. If you are one, join our team and help to keep our society safe! Visit us at for more info. STR is an equal opportunity employer. We are fully dedicated to hiring the most qualified candidate regardless of race, color, religion, sex (including gender identity, sexual orientation and pregnancy), marital status, national origin, age, veteran status, disability, genetic information or any other characteristic protected by federal, state or local laws. If you need a reasonable accommodation for any portion of the employment process, email us at and provide your contact info. Pursuant to applicable federal law and regulations, positions at STR require employees to obtain national security clearances and satisfy the requirements for compliance with export control and other applicable laws.

Job Description Work Arrangement This is an onsite position in Tampa, FL, Huntsville , or Northern, VA. Job Overview A Mechanical Engineer 3 is responsible for designing, analyzing, and improving mechanical systems and components. Essential Functions • Plan and perform engineering research, design, and development in conformance with design, engineering, and customer specifications, • Identify and document requirement through customer interface, • Create and review Mechanical CAD drawings and component layout designs, • Create, review, and maintain assembly drawings for enclosures, circuit boards, internal and external cable assemblies, etc., • Own mass properties (weight, CG, inertia) and manage configuration trade-offs to meet performance targets, • Design and support tooling, fixtures, and jigs for prototype builds, test, and low-rate production, • Apply DFx principles (DFM, DFA, DFS, DFR) to improve manufacturability, assembly, reliability, serviceability, and cost, • Conduct rapid prototyping (3D printing, composites, machined parts) and hands-on integration, • Conduct tolerance analysis, basic structural trade studies, and environmental considerations, • Support build, integration, and flight test activities; rapidly troubleshoot mechanical issues, • Utilize industry and/or military specifications for Shock, Vibration, Temperature and Humidity requirements to develop and validate products, • Create and maintain engineering documentation (drawings, user instructions, bill of materials, etc.), • Review mechanical designs and drawings of other Engineers, • Support manufacturing with aiding in work instruction generation, technical guidance on process settings and aid in development/implementation of new manufacturing test/build equipment as need Other duties as assigned Standard Essential Functions • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications • Proficient with 2D or 3D engineering design and manufacturing tools (e.g., AutoCAD, ProE or other), • Adequate knowledge of engineering analysis tools (ANSYS, ProMechanica or similar), • Proficient with GD&T and engineering drawing standards, • Strong knowledge of Solidworks, • Detail oriented and capable with working in a team environment, • 6-9 years of mechanical engineering experience., • Hands-on experience with computer-aided engineering (CAE) and computer-aided manufacturing (CAM) Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Security Clearance • Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Work Arrangement This is an onsite position in Tampa, FL, Huntsville , or Northern, VA. Job Overview The Sr. Mechanical Engineer designs, develops, and oversees mechanical systems and components for various projects. Leads engineering teams, manages project timelines, ensures compliance with industry standards, performs technical analysis, and collaborates with cross-functional departments to deliver efficient and reliable mechanical solutions. Essential Functions • Investigates, analyzes, plans, designs, develops, implements, tests, to evaluate military weapons systems, • Reviews and prepares engineering and technical analyses, reports, change proposals, and other technical documentation, • Perform system integration, configuration management, quality assurance testing, or acquisition and resource management, • Analyzes designs, develops, implements, tests, or evaluates software, components, or systems related to engineering or functional requirements of military weapons systems, associated support systems, or Leads the execution of complex tasks, • Analyzes designs, develops, implements, tests, or evaluates software related to engineering or functional requirements of military weapons systems and associated support systems., • Reviews and prepares engineering and technical analyses, reports, change proposals, and other technical documentation, • Own mass properties (weight, CG, inertia) and manage configuration trade-offs to meet performance targets, • Design and support tooling, fixtures, and jigs for prototype builds, test, and low-rate production, • Apply DFx principles (DFM, DFA, DFS, DFR) to improve manufacturability, assembly, reliability, serviceability, and cost, • Lead design reviews and cross-functional integration efforts, • Lead rapid prototyping (3D printing, composites, machined parts) and hands-on integration, • Conduct tolerance analysis, basic structural trade studies, and environmental considerations, • Lead build, integration, and flight test activities; rapidly troubleshoot mechanical issues, • Provide mentorship to other members of the team., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications • Strong ability to performs tasks with little or no guidance, • Familiarity with 2D or 3D engineering design and manufacturing tools (e.g., AutoCAD, ProE or other), • Strong knowledge of engineering analysis tools (ANSYS, ProMechanica or similar), • Extremely Proficient with GD&T and engineering drawing standards, • Strong knowledge of Solidworks, • Bachelor's Degree in Mechanical Engineering or other related discipline., • 9+ years of mechanical engineering experience, • DoD experience highly preferred, • Experience in SolidWorks, SolidWorks Simulation, AutoCAD, electrical circuit design/troubleshooting, printed circuit board design, reverse engineering techniques, and Microsoft Project, • Experience with computer-aided engineering (CAE) and computer-aided manufacturing (CAM) Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required repetitive movements of wrists, hands, and/or fingers Security Clearance • Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Location: Springfield, VA (onsite) NOTE: This is not a remote or hybrid position. PD Power Systems, LLC is seeking a XML Technical Writer and Provisioner to join our integrated product support and documentation team. This individual will collaborate and work primarily with the Engineering Team. This position will involve writing high-quality technical manuals and performing hands-on procedure validation to verify accuracy. The role will involve an understanding of engineering assembly structure, the U.S. military's FLIS parts database, creating an exploded view in SolidWorks and vector graphics, and generating accompanying XML code with applicable data. Do not be intimidated if these terms are new to you - initiative, curiosity, and ownership are the requirements! Roles and Responsibilities • Write technical manuals using varying source material, including engineering drawings and CAD models - quality and accuracy are valued over volume, • Hands-on procedure validation - observe users perform tasks and record feedback, • Develop and curate parts lists and create a parts break-down, • 2 or 4-year degree in any engineering discipline, • Hands-on technical experience with mechanical/electrical equipment, such as vehicles or power generation systems, • Prior experience in technical writing, • Prior experience in any aspect of military Integrated Product Support (IPS), • MIL-STD-40051-2D Army technical manuals - XML; Arbortext, • MIL-DTL-37929 Air Force technical orders - SGML, • Microsoft Office (Word, Excel, PowerPoint), • Vector graphics (CorelDraw or Adobe Illustrator), • Programming in Python, • XML and Arbortext, • SolidWorks CAD, • Excellent verbal and written communication skills, problem solving abilities., • Ability and flexibility to travel domestically and internationally - up to 20%, • Medical, • Dental, • Vision, • 401(k) PD Power Systems is committed to the principle of equal employment opportunity for all employees and job applicants and to provide employees with a work environment free of discrimination and harassment. Employment decisions at PD Power Systems are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job Description Senior Mechanical Engineer/Designer Located in Springfield, VA (Onsite). This is not a remote or hybrid position. The Senior Mechanical Engineer is responsible for the design and development of electro-mechanical equipment. Potential hire will be working directly with the design team and manufacturing vendor. Candidate will design, troubleshoot, diagnose, and solve challenges related to product development. This includes root cause analysis, working with suppliers and in-house support personnel, and design improvements from concept to production. Candidate will also be responsible for maintaining, updating drawings and Bills of Material and offer test support. This position is onsite at our Springfield, VA office. Roles and Responsibilities • Design systems and integrate the multiple systems using SolidWorks from initial concept stage through production launch., • Generate and provide analysis of FEA studies in Solidworks., • Generate and analyze drawings from parts/assemblies IAW ASME 14.100 and MIL- STD-31000., • Assist in production problem solving by interfacing with the manufacturing team to find creative solutions., • Education: 4-year Mechanical Engineering degree with 10+ years of hands-on experience. OR, • Experience designing mechanical systems and power generation and distribution systems., • Experience using Microsoft Office (Word, Excel, PowerPoint), problem solving, technical documentation/communication., • Excellent verbal and written communication skills, problem solving abilities., • Must be eligible to receive U.S. Security Clearance, • Medical, • Dental, • Vision, • 401(k) PD Power Systems is committed to the principle of equal employment opportunity for all employees and job applicants and to providing employees with a work environment free of discrimination and harassment. Employment decisions at PD Power Systems are based on business needs, job requirements, and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job Description Work Arrangement This is an onsite position in Tampa, FL, Huntsville , or Northern, VA. Job Overview The Systems Engineer 3 will contribute to the development, integration, and testing of Unmanned Aerial Systems (UAS). This upper-level role requires a hands-on approach to support subsystem integration and execute test plans to meet aerospace standards under the guidance of senior engineers. Essential Functions • Design and implement integration plans for UAS subsystems, ensuring compatibility across mechanical, electrical, and software components., • Support circuit board design, including schematic capture and PCB layout, using tools such as Altium or Eagle, under senior engineer supervision., • Conduct benchtop electrical tests, such as power distribution and signal integrity checks, using oscilloscopes, multimeters, and other test equipment., • Own propulsion system requirements, interfaces, and verification plans for jet and RATO-equipped UAS platforms, • Perform RF testing, including antenna performance and signal propagation, to support communication and telemetry system integration., • Execute test plans for environmental, functional, and stress testing, following established procedures to meet aerospace standards (e.g., MIL-STD, DO-160)., • Identify and resolve integration issues related to electrical systems & mechanical systems, collaborating with cross-functional teams., • Prepare technical documentation, including test procedures and reports, to support system validation and certification., • Support ground test, hot-fire, integration, and flight test planning and execution, • Define propulsion system architectures, including engines, RATO units, ignition systems, fuel delivery, and controls, • Manage propulsion interfaces with airframe, avionics, power, controls, and safety systems, • Coordinate with suppliers and partners on propulsion components and qualification, • Support certification, compliance, and range safety requirements as applicable, • Work on multi-discipline teams with systems engineers, software developers, electrical engineers, and mechanical engineers to support cohesive system design and performance., • Follow regulations and safety standards during integration and testing activities., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications • Excellent at hands on building of mechanical assemblies for support of testing activities, fit checks, etc., • Proficiency in electrical design tools (e.g., Altium Designer, Eagle) and data analysis tools., • Familiarity with test equipment (e.g., oscilloscopes, multimeters, signal generators)., • Strong understanding of electrical systems (power management, analog/digital circuits)., • Familiarity of RF principles (signal modulation, antenna performance) is a plus., • Familiarity of Mechanical Design Software (SolidWorks, Fusion360) is a plus., • Familiarity with aerospace/MIL standards., • Strong problem-solving, communication, and teamwork skills, • Proficient knowledge of embedded systems or firmware development., • Bachelor's Degree in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Systems Engineering, or a related field., • 6+ years of relevant engineering experience supporting defense, aerospace, or related technical programs., • Hands-on experience with circuit board design and/or benchtop electrical testing., • Experience with UAS or drone systems through projects., • Experience with integration and testing of subsystems into aerospace vehicles., • Experience working with electrical systems, including circuit board design, benchtop electrical testing, and RF work Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to sit, and to reach to use computers and other office equipment Security Clearance • Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Work Arrangement This is an onsite position in Tampa, FL, Huntsville , or Northern, VA. Job Overview The Electrical Engineer 3 position plays a crucial role in designing, developing, and maintaining electrical systems, components, and leading larger projects. As a more experienced contributor, ownership of larger tasks and leadership of team members will be expected. This key player will combine technical expertise, mentorship, and problem-solving skills to design, implement, and maintain electrical systems such as vehicle avionics, battery and power subsystems, radio communication systems, navigation, and computer vision systems, etc. as well as design PCB's and review PCB's from schematic Essential Functions • Design, develop and test electrical systems and equipment for military, industrial, commercial, and consumer use related to Unmanned Systems (UAVs, UGVs, USVs) of various types., • Design, test, and review new and existing PCB designs., • Support flight test events., • Selection of components and equipment based on analysis of specifications and reliability and determines design approaches and parameters., • Works with avionics, embedded systems (microcontrollers, FPGAs, Single Board Computers etc…), and Radio Frequency (RF) links. Supports Flight Test operations, demonstrations and exercises as needed., • Develop and maintain electrical control systems, including wiring diagrams and schematics., • Analyze and interpret technical data, such as specifications, blueprints, and schematics, to ensure compliance with applicable codes and regulations. Familiarity with military standards related to reliability and safety., • Collaborate with teams of other engineers, technicians, and clients to identify and resolve technical issues and improve system performance., • Plan and oversee the installation, operation, maintenance, and repair of electrical systems and equipment., • Troubleshoot electrical problems and provide technical support to production staff as needed., • Support customer funded efforts, and aid in the transition of these efforts into production., • Support rapid prototyping, system bring-up, and hardware-in-the-loop (HIL) testing, • Implement quality control processes to ensure product reliability and performance., • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications • Strong knowledge of common industry protocols (LVDS, I2C, HDMI, UART, SPI, CAN, USB, MIPI), • Proficient in circuit design with knowledge of embedded microcontrollers, video image processing, battery technology, motor controllers, and power distribution., • Strong ECAD skills applying knowledge of electrical design software for schematic capture and PCB layout (Altium (Preferred), Eagle PCB, Autodesk Fusion360, KICAD, etc...) required, • Strong Knowledge of the following:, • Electrical simulation tools such as LTspice, • Radio Frequency (RF) simulation tools such as ANSYS HFSS or CST Microwave Studio, • MCAD with Autodesk Fusion360 and/or SolidWorks, • Embedded processors such as ARM, and embedded programming skills therein with C/C++, • Familiarity with gas and battery-powered Unmanned Aerial Vehicles (UAVs) and associated avionics and electronics such as IMUs, AHRS, BLDC motors, etc..., • Excellent Test and Debug abilities with common lab equipment including DMMs, Oscilloscopes, Spectrum Analyzers, Vector Network Analyzers, Logic Analyzers, etc..., • Ability to work independently and as part of a team., • Good leadership skills including managing a team through software such as Jira or Confluence., • Ability to problem solve at a high level with little technical guidance from leadership., • Excellent verbal and written communication skills, • Bachelor's degree in electrical engineering or a related field, • 6+ years of electrical engineering experience. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to sit, and to reach to use computers and other office equipment, • Occasionally required repetitive movements of wrists, hands, and/or fingers Security Clearance • Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Electrical Engineer/Designer Location is onsite in Springfield, VA. This is not a remote or hybrid position. PD Power Systems LLC is seeking an Electrical Engineer/Designer responsible for designing electrical and control systems for electrical power generation and distribution systems and equipment. The candidate will work closely with Mechanical Designers and Engineers in integrating controls into the electrical systems. The candidate must be familiar with electrical power generation, distribution, and various control systems to include PLCs, generator digital controls, and human machine interfaces. Experience with 2D CAD is required, experience with 3D CAD is desirable. The position requires close teamwork with other employees in engineering as well as support, both within the company and with subcontractors. Roles and Responsibilities • Prepare, edit and maintain electrical schematics, panel diagrams, cable assembles, and wiring drawings using AutoCAD software., • Create, maintain and troubleshoot PLC systems., • Be able to source components based upon customer requirements and specifications., • Education: 4-year Electrical Engineering degree with 1-5+ years of hands-on experience. OR, • Experience designing electrical control systems and power generation and distribution systems., • To include prototype builds, production builds, schematic designs, and troubleshooting and diagnosing system issues., • Experience using Microsoft Office (Word, Excel, PowerPoint), problem solving, technical documentation/communication., • Experience with electrical power from low voltage AC (120/208V) through medium voltage (15kV)., • Understanding electrical design techniques, circuit protections, and principals involved in development of electrical drawings for Technical Data Packages (TDP)., • Excellent verbal and written communication skills, problem solving abilities., • Ability and flexibility to travel domestically and internationally - up to 20%, • Medical, • Dental, • Vision, • 401(k) PD Power Systems is committed to the principle of equal employment opportunity for all employees and job applicants and to providing employees with a work environment free of discrimination and harassment. Employment decisions at PD Power Systems are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job Description Summary Abbott on Call is seeking an experienced and innovative Senior Naval Architect with strong Finite Element Modeling (FEMAP/NASTRAN) capabilities and a solid foundation in ship design and structural analysis. This individual will lead or support design and analysis projects for vessels ranging from military craft to commercial ships. You will play a key role in developing structural models, performing FEA simulations, and producing technical deliverables in compliance with regulatory and classification standards. Required Qualifications · Bachelor’s or Master’s in Naval Architecture, Marine Engineering, Ocean Engineering, or related ABET-accredited field · 10+ years of relevant naval architecture and marine structural analysis experience · U.S. Citizenship required with the ability to obtain a DoD security clearance Demonstrated experience in: · Finite Element Modeling and Analysis using FEMAP and NASTRAN (Minimum 5 years) · Structural design and analysis of marine systems · Hull form, resistance and powering, hydrostatics, and stability Working knowledge of: · Damage stability, vibration, seakeeping, and survivability · Classification and regulatory standards (ABS, MIL-SPEC, US Navy, ABYC) · Structural and compartmental arrangements Proficient with: · 2D/3D CAD tools (AutoCAD, Rhino, SolidWorks preferred) · Microsoft Office suite (Excel, Word, Project, Access) Key Responsibilities · Lead Finite Element Analysis (FEA): · Develop structural FE models in FEMAP · Apply realistic boundary conditions and load cases · Evaluate stress and deformation results and document findings in formal reports for classification or certification review Naval Architecture Design & Analysis: · Perform hull girder and local structural calculations per ABS, MIL-SPEC, or commercial standards · Conduct intact and damaged stability assessments and develop hydrostatic curves · Prepare and review lines plans, hull form geometry, and weight estimates · Participate in inclining experiments and deadweight surveys Concept through Detail Design: · Develop principal characteristics, general arrangements, and structural layouts · Participate in concept and feasibility studies for new or modified vessels · Integrate inputs from marine engineering, structural, and systems disciplines Project & Client Support: · Assist in preparation of specifications, drawings, and technical reports · Participate in design reviews and technical briefings with stakeholders · Provide onsite support for ship checks, measurements, and structural assessments (must access remote areas of vessels and lift up to 30 lbs) Preferred Qualifications · Active DoD Secret or higher clearance · Experience working with shipyards or DoD/military clients · Familiarity with other FEA tools such as NASTRAN, ANSYS, ABAQUS, or LS-DYNA · Understanding of shock and vibration design principles for naval vessels · Familiarity with digital twin or model-based systems engineering (MBSE) Notes This position may require base access screening in addition to clearance eligibility Occasional shipboard and remote field work required Company DescriptionNaval Engineering FirmNaval Engineering Firm

Job Description Mechanical Engineer/Designer Located in Springfield, VA (Onsite). This is not a remote or hybrid position. The Mechanical Engineer is responsible for the design and development of electro-mechanical equipment. Potential hire will be working directly with the design team and manufacturing vendor. Candidate will design, troubleshoot, diagnose, and solve challenges related to product development. This includes root cause analysis, working with suppliers and in-house support personnel, and design improvements from concept to production. Candidate will also be responsible for maintaining, updating drawings and Bills of Material and offer test support. This position is onsite at our Springfield, VA office. Roles and Responsibilities • Design systems and integrate the multiple systems using SolidWorks from initial concept stage through production launch., • Generate and provide analysis of FEA studies in Solidworks., • Generate and analyze drawings from parts/assemblies IAW ASME 14.100 and MIL- STD-31000., • Assist in production problem solving by interfacing with the manufacturing team to find creative solutions., • Education: 4-year Mechanical Engineering degree with 1-5+ years of hands-on experience. OR, • Experience designing mechanical systems and power generation and distribution systems., • Experience using Microsoft Office (Word, Excel, PowerPoint), problem solving, technical documentation/communication., • Excellent verbal and written communication skills, problem solving abilities., • Must be eligible to receive U.S. Security Clearance, • Medical, • Dental, • Vision, • 401(k) PD Power Systems is committed to the principle of equal employment opportunity for all employees and job applicants and to providing employees with a work environment free of discrimination and harassment. Employment decisions at PD Power Systems are based on business needs, job requirements, and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate.

Job Description Work Arrangement This is an onsite position in Tampa, FL, Huntsville , or Northern, VA. Job Overview The Electrical Engineer 2 will support designing, developing, and maintaining electrical systems and components across multiple R&D efforts and production lines. This key player will combine technical expertise and problem-solving skills to design, implement, and maintain a broad range of electrical systems in various domains including embedded systems (simulation, schematic capture, PCB layout, firmware development), power electronics, radio frequency (RF) devices and antennas, battery and associated management systems. Essential Functions • Design, develop and test electrical systems and equipment for military, industrial, commercial, and consumer use related to Unmanned Systems (UAVs, UGVs, USVs) of various types., • Support the development and maintenance of electrical system documentation including wiring diagrams and schematics through an organized release process utilizing modern distributed version control technologies such as GIT., • Assist with the design, test, and review new and existing PCB designs., • Analyze and interpret technical data, such as specifications, blueprints, and schematics, to ensure compliance with applicable codes and regulations. Familiarity with military standards related to reliability and safety is preferred., • Collaborate with other engineers, technicians, and clients to identify and resolve technical issues and improve system performance., • Support the installation, operation, maintenance, and repair of electrical systems and equipment., • Troubleshoot electrical problems and provide technical support to production staff as needed, • Develop and implement automated programming and testing apparatuses to aid in production and quality assurance of circuit boards and subassemblies., • Support rapid prototyping, system bring-up, and hardware-in-the-loop (HIL) testing, • Contribute to internal R&D efforts and aid in the transition of these efforts into production, • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Embodies AEVEX's cultural values and aligns daily actions with department goals and company culture. Qualifications • Knowledge of electrical design software for schematic capture and PCB layout (Altium (Preferred), Eagle PCB, Autodesk Fusion360, KICAD, etc...), • Knowledge of electrical simulation tools such as LTspice, • Knowledge of Radio Frequency (RF) simulation tools such as ANSYS HFSS or CST Microwave Studio is beneficial., • Limited MCAD skills with Autodesk Fusion360 and/or SolidWorks are beneficial., • Knowledge of common industry protocols (LVDS, I2C, HDMI, UART, SPI, CAN, USB, MIPI), • Familiarity with battery-powered Unmanned Aerial Vehicles (UAVs) and associated avionics and electronics such as IMUs, AHRS, BLDC motors, etc..., • Knowledge of embedded processors such as ARM, and basic embedded programming skills therein with C/C++, • Knowledge of test and debug abilities with common lab equipment including DMMs, Oscilloscopes, Spectrum Analyzers, Vector Network Analyzers, Logic Analyzers, etc..., • Strong soldering skills required, • Strong problem-solving and analytical skills, • Ability to work independently and as part of a team, • Bachelor's degree in electrical engineering or a related field, • 3+ years of electrical engineering experience. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: • Frequently required to sit, and to reach to use computers and other office equipment, • Frequently required repetitive movements of wrists, hands, and/or fingers Security Clearance • Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Our client is looking to hire a Senior Mechanical Engineer - on site This Jobot Job is hosted by: Nick Frei Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $100,000 - $200,000 per year A bit about us: We are actively seeking a dynamic, innovative,

L3Harris Technologies is seeking a Senior Associate, Manufacturing Engineer at the Aerojet Rocketdyne Segment’s Orange, VA site.Our site is near Culpeper, VA , in beautiful, rural Orange County (1.Washington, DC)! This site is our center of excellence for Solid Rocket Motor Propulsion and Energeti

At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven".We have been in business for more than 110 years and we are known for our quality work and quality employees.This is your chance to join our team - help us to design the infrastructure and buildings that improve the w

Tax Manager Opportunity with Top-Rated Public Accounting Firm!.This Jobot Job is hosted by: David DeCristofaro.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $100,000 - $150,000 per year.We are Professional Advisory firm with decades of exce

At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven".We have been in business for more than 110 years and we are known for our quality work and quality employees.This is your chance to join our team - help us to preserve and renew the infrastructure and buildings that i

Well-established, stable US Manufacturer seeking experienced Journeyman Millwright to join the team!.This Jobot Job is hosted by: Catherine Reid.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Manufacturing company offering stability, training, and t

IA Interior Architects translates client goals, brand and culture into powerful environments built around people, processes, technologies and business drivers.Our clients in diverse markets worldwide require high-performance, visually compelling and sustainable environments to move their enterprise

Need: A portfolio link showcasing your creative expertise.As part of our marketing team, based in Falls Church, VA, you'll collaborate with a talented, hands-on group of creative professionals dedicated to designing compelling and engaging brand experiences that resonate and drive growth.This positi

With over 3,000 employees throughout the Americas, Asia, and Europe, the firm provides support on projects of varying size and complexity.Together, we enhance conventional designs with smarter, more resilient systems.We provide people with better mobility.We steward precious resources by finding mor

Job Locations US-DC-Washington | US-VA-Tysons Corner ID 2026-5899 Category CAD Design Type Regular Full-Time Career Stage Type Experienced # of Openings 1 .VHB's Metro DC of

SteerBridge Strategies is a modern technology company delivering innovative, mission‑focused solutions to the U.Leveraging deep expertise in federal acquisition, digital transformation, and emerging technologies, we deliver agile, commercial‑grade capabilities that accelerate operational effecti

Junior Graphic and Animation Designer.As the world’s largest business organization, we believe in building a future that gives everyone the opportunity to pursue a better tomorrow.We make it our job today–and every day–to build the strongest relationships possible among the American people, bu

Mechanical Test Engineer Apply now () .Job Description (General Summary).Hanover, MD is looking for a new Test Engineer on our innovative Development team.The Hanover location is headquarters to our innovation in conveyance equipment and su

Position Description & Qualifications.If you are interested in supporting the Navy's #1 acquisition program and enjoy a challenging job which requires technical rigor and will build on your current level of expertise, Serco has a great opportunity for you!.As a Marine Propulsion Engineer / Mechanica

Mechanical Engineer: Equipment R&D Group Apply now () .Job Description (General Summary).Intralox is currently seeking a Mechanical Engineer for our Equipment R&D Group based in Hanover, MD.In this role, you will drive the development of in

At AECOM, we're delivering a better world.Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive.We are the world's trusted infrastructure consulting firm, partnering with clients to solve the wor

This job opportunity is available at ANY location in the United States.Ideally, selected candidates will be near a JACOBS U.At Jacobs, we don't settle - always looking beyond to raise the bar and deliver with excellence.We apply our expertise and knowledge as we look into the future with great optim

Communities everywhere share the need for clean water.And as they work to meet that need, they're facing new, more complex challenges every day.Our water professionals collaborate to contribute innovative ideas, guided by scientific rigor and a vision for sustainable growth.Every day, we're helping

Senior Mechanical Engineer, Mission Critical, Traveler.Kansas City, MO, US, 64106Minot, ND, US, 58701Detroit, OH, USHouston, TX, US, 77057Springfield, MO, US, 65810Clarksville, TN, USColumbus, OH, USWillston, ND, US, 58801Louisville, KY, USAustin, TX, US, 78704Myrtle Beach, SC, US, 29577Charlotte, N

Graphic Designer Job Duties: Prepares work to be accomplished by gathering information and materials.Plans concept by studying information and materials.Illustrates concept by designing rough layo

In a world of possibilities, pursue one with endless opportunities.At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself.Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that

Graphic Designer Job Duties: Prepares work to be accomplished by gathering information and materials.Plans concept by studying information and materials.Illustrates concept by designing rough layo