Trabajos welder en Maryland

Job Description We are seeking a skilled and dependable Shop Mechanic to support our fleet and equipment operations throughout the DC Metro area. This role is responsible for the inspection, preventive maintenance, troubleshooting, and repair of heavy construction equipment and trucks to ensure safe, efficient, and reliable jobsite operations. Duties & Responsibilities • Must have experience with welding heavy equipment, • Perform maintenance and repairs on fleet and job-site equipment including dump trucks, pickup trucks, wheel loaders, excavators, loaders, heavy tracked dozers, air compressors, and other support equipment., • Diagnose and troubleshoot mechanical, hydraulic, and electrical systems using appropriate diagnostic tools and equipment., • Conduct preventive and proactive maintenance, including thorough inspections to maximize equipment uptime., • Maintain accurate daily logs of all work performed., • Ensure equipment productivity and reliability remain high., • Follow and promote strict safety standards in the shop and on job sites., • Read maps and follow directions to various job locations when required., • Work efficiently in time-sensitive situations with changing priorities. Required Skills & Qualifications • Minimum of three (3) years of experience repairing and maintaining heavy diesel-fueled construction equipment, including mechanical, hydraulic, welding heavy equipment and AC electrical motor knowledge, • Experience working on 2018 model year and newer trucks/ equipment, • Strong working knowledge of vehicle diagnostic equipment., • Experience performing preventive maintenance on large off-road or heavy equipment., • Ability to work independently with minimal supervision and as part of a team., • Strong verbal, written, and listening communication skills, including the ability to work effectively in high-stress situations., • Flexible, dependable, and adaptable in a fast-paced environment., • Ability to lift, carry, push, or pull up to 75 pounds., • Ability to work in varied weather and temperature conditions. Additional Requirements • Clean driving record (no recent DUI/DWI or aggressive driving convictions)., • Knowledge of the DC Metro area., • High school diploma or GED required., • Ability to read, write, and speak English, bilingual a plus, • CDL is a plus but not required., • Must have or be able to obtain a DOT Medical Card (Non-CDL acceptable)., • Must provide own basic hand toolbox company provides additional tools., • Welding experience is a plus; must be willing to learn. Compensation & Benefits • Weekly pay with direct deposit options., • Paid time off (PTO) & Paid holidays., • Company-subsidized medical and dental insurance, • 401(k) retirement plan with company match:, • Overtime opportunities, including Saturday work EOE #campaign

Auto Body Technician Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Be a part of a rapidly growing company whose mission is to put safety, quality, integrity, and heart into every vehicle we repair and customer we serve. Classic Collision offers competitive pay, benefits, and career advancement opportunities. Please come and join our team! Why Choose Classic Collision? • Paid Weekly, • Continuous Training, • Supportive Team Culture, • Company match 401K, • Medical/Dental/Vision, • Paid Time Off - 6 Paid Holidays, • Rewarding Work Responsibilities • Complete disassembly of vehicle to assist Collision Estimators in assessing damage to prepare a 100% Repair Plan, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Plan work procedure: follow work order for all operations listed, • Remove upholstery, accessories, electrical and hydraulic windows, and seat operating equipment to gain access to damaged area of vehicle if needed. Store parts on carts or cover to eliminate potential damage, • Mend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged panels and bolts or welds replacement parts in position and reassemble after parts are painted, • Operate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.), • File, grind, and sand repaired surfaces before turning vehicle over to the Paint Dept., • Repair or replace defective parts, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Inspect and test drive repaired vehicles to check for compliance with safety and quality standards, • Perform other related duties as assigned, • Comply with all Classic Collision standard operating procedures, safety, rules, and guidelines Qualifications • Must be at least 18 years of age, • I-CAR / ASE certifications preferred, • 2-3 years’ collision repair experience preferred, • Valid Driver's License Required, • Customer-focused attitude with the ability to work well in a team environment, • Ability to read and comprehend written instructions and information, • Successful completion of background check required Behaviors/Competencies: • Integrity-Respect and accountability at every level and every interaction, • Customer Service-Provide the highest level of customer service while building customer satisfaction and retention, • Innovation-Develops and displays innovative approaches and ideas to our business, • Teamwork-Contributes to building a positive team spirit and supports everyone’s efforts to succeed Physical & Environmental While performing the duties of this job, the employee is regularly required to use hands, and is required to talk and hear. The employee is frequently required to stand, sit, and walk occasionally for long periods at a time. The employee may occasionally be required to reach with hands, arms and move objects up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and ability to adjust focus. In addition, abilities for assessing the accuracy, neatness and thoroughness of the work assigned is required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential function. Classic Collision is an Equal Opportunity Employer: As an equal opportunity employer, Classic Collision does not discriminate against any employee or candidate based on age, race, gender identity, gender expression, genetic information, national origin, physical or mental disability, protected veteran status, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by all applicable federal, state, and local laws. Reasonable Accommodations: Classic Collision is an equal opportunity employer that is committed to working with and providing reasonable accommodations to individual with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or submit an online application, please e-mail recruiting@classiccollision.com or call (470)500-6808. This email and phone number are listed exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. This job description is not a complete statement of all duties and responsibilities comprising the position. #60 Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job DescriptionDescription: Rugged Science is a designer and manufacturer of ruggedized, embedded computer systems. We specialize in custom prototype development as well as sustained production runs. Our products combine metal enclosures, computers, displays, and electronics. Rugged Science is looking for a strong candidate to be a key player in fabricating custom metal components for our products. Requirements: Responsibilities: • Set up of fiber laser cutter for processing flat sheets, • Load/unload of flat sheets and cut parts, • Monitor fiber laser cutter for processing errors, • Process cut metal through deburring equipment, • Set up press brake for new jobs, • Process material through press brake, • Monitor press brake for processing errors, • Insert PEM fasteners into metal work, • Utilize various measuring and inspection tools, • Perform 1st piece verification off machine prior to releasing production, • Review/read blueprints and specs, • Perform work within expected rates and costs, • Assist in processing prototypes and special orders, • Provide feedback to leadership regarding fabrication limitations and best practices, • Accurately track material usage and labor time in ERP system (Global Shop Solutions), • Operate laser welder in accordance with safety standards to weld aluminum parts for military products, • Program robotic arm with laser welder attachment and supervise robot while running Education/Skills: · High school graduate required (Must be at least 18 years of age) • Self-motivated, • Desire and drive to keep busy, • Mechanically inclined, • Metal working knowledge, • Technology oriented, • Desire to learn new processes, • Robotic programming experience (preferred), • Must be able to lift 50lbs Overtime may be required throughout the year with pay at time and a half.

Job Description R&R Fabrication is hiring an experienced structural steel welder for an immediate full-time opening in Prince Frederick, Maryland. Pay is $23 to $27 per hour based on experience and qualifications. This position is for candidates with actual structural steel welding experience. General production welding, automotive welding, or TIG-only experience without structural steel experience does not meet the requirements. Required qualifications • At least 2 years of hands-on structural steel welding experience., • Ability to read shop drawings and weld symbols and independently fit and weld structural steel accurately. Field welding experience is a strong plus, especially SMAW/stick and FCAW/flux-core welding at jobsites. Structural steel connecting and ironworker experience are also a plus. Apply with a resume describing your structural steel welding experience, any field welding experience, and your earliest available start date. We are hiring immediately. \nCompany Description We are looking for people who take ownership, move fast, and want to be part of building something that lasts. We are looking for people who take ownership, move fast, and want to be part of building something that lasts.

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR cF2ugOLwD5

Job Description North American Millwright Services is a well-established and trusted Millwright Contractor that takes on some of the most complex industrial maintenance/manufacturing projects in the Chesapeake Region. This is your chance to join a growing, dynamic team and have a rewarding career. We are hiring team-oriented millwrights, entry-level through senior level. Rigging and Welding certifications or experience a plus (TIG, MIG, Stick); in-house training also available. Total Compensation Package includes: • Competitive Pay, • Medical, • Dental, • Vision, • Life Insurance (at no cost to you!), • Disability Insurance (at no cost to you!), • 401(k) Plan (up to 8% employer match), • Uniforms, • Safety shoe reimbursement, • Paid Holidays, • Paid Time Off, • Discretionary Bonus, • Referral Bonus, • Tuition Assistance Job Summary A millwright is tasked with installing and maintaining equipment used in multiple industries. Work includes installing, transferring, dismantling, and repairing equipment and machinery including welding. Job sites vary from factories, mine sites, and other industrial sites. Millwrights must be able to make decisions, troubleshoot, and perform repairs with little to no supervision. The ideal candidate will be have a strong working knowledge of industrial maintenance, welding and rigging. Duties and Responsibilities • Adheres to all NAMS policies and OSHA/MSHA safety rules & regulations, • Takes swift action to stop any imminent danger situations you may encounter, • Promptly reports all accidents and near misses, including minor first aid and property damages prior to end of shift;, • Conducts daily workplace exams; identifies and promptly resolves potential hazards or immediately barricades area or equipment and contacts NAMS and/or the customer’s safety team to resolve, • Builds the foundation for machines, • Constructs and installs equipment such as shafting, conveyors and rails, • Review and interpret engineering specifications, schematics and blueprints to determine work procedures, • Grind and file machinery parts, • Work with a range of hand tools, measuring tools, welding and brazing equipment, • Determine which machines, techniques, and tools to use specific to each job, • Travel to customer job sites, including extended stays during from time to time Requirements and Qualifications • High school diploma or certification in a skilled trade, • Completion of accredited millwright certification program a plus, • 3 years' relevant experience in an industrial or construction setting, • Ability to read drawings, plans, and blueprints and convey this information to others, • Ability to communicate effectively including interpersonal skills; must be a team player, • Aptitude in math, • Attention to detail, • Strong decision making and problem-solving, • Good physical condition and stamina, • Valid Driver’s License with an acceptable driving record, • Owns minimum personal tools required for essential tasks Physical Requirements: • Frequently required to walk, sit, stand, balance, stoop, bend, push, pull, lift, reach, kneel, crouch, crawl and climb stairs/ladders and use of hands, • Must have vision, hearing, and ability to talk, • Exposure to hot/cold temperatures, • Must be able to lift up to 50 pounds at times, • Ability to travel independently throughout multiple NAMS facilities including customer job sites North American Millwright Services Inc is an equal opportunity employer

Job DescriptionIndustrial Pipe welders for field work from Elkton MD to DC along I-95, as well as the Baltimore Beltway. Start: ASAPDuration: 4+ monthsPay: $30-$35 DOENo per diem, local candidates only. Must pass 10-panel drug screening.MUST pass pipe weld tests. Testing conducted in Williamsport, MD • ASME Section IX 6” Pipe Test, 6G Position (STICK), • ASME Section IX 2” Pipe Test, 6G Position (TIG)

Job Description This is a 10-hour day shift Monday-Thursday with occasional Friday overtime. Manufacturing company in Joppa, MD looking for people with hands-on skills in the following areas: mechanical assembly and fabrication, welding, industrial machine wiring, and/or industrial plumbing. We are looking for people to join our production team to build state of the art automated machinery. Benefits, vacation, 401K, company picnics, overtime opportunities, great working environment, and a brand new building! Requirements • Live within a 45 minute commute of Joppa, MD, • Have on-the-job experience in mechanical assembly and fabrication, • Have on-the-job experience in MIG welding, • Have on-the-job experience in TIG welding, • Have hands-on experience in industrial wiring, • Have hands-on experience in industrial plumbing Benefits • 4-day workweek (4x10 hour shifts), • 401(k) w/ matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job DescriptionDescription: Capitol Boiler Works, Inc. is a well-established mechanical contracting company offering true 24/7/365 service in all mechanical crafts. CBW serves the DC Metro area and parts of West Virginia and Delaware, with offices in Springfield, VA, Richmond, VA, Hebron MD, and Baltimore, MD. Our primary focus is commercial and industrial customers in the region, with a specialty in property management companies. Capitol Boiler Works, Inc. is a privately held company serving the region since 1936. CBW is currently seeking the right individual to fill a full-time opening for Commercial Welder/Fabricator. We offer a competitive benefits package including: • Medical, • Dental, • Vision, • Life & Disability, • Supplemental Ins., • 401k, • Flexible Spending Account (FSA), • Health Savings Account (HSA) ESSENTIAL DUTIES AND RESPONSIBILITIES may include any/all of the following: • Lays out, positions, and secures parts and assembles according to specifications, using straight edge, combination square, calipers, and ruler., • Tack-welds or welds components and assembles using electric, gas, arc, or other welding equipment., • Cuts work piece, using powered saws hand shears or chipping knife., • Melts lead bar, wire, or scrap to add lead to joint or to extrude melted scrap into reusable form., • Installs or repairs equipment such as lead pipes, valves, floors, and tank linings., • Observes tests on welded surfaces such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications., • Inspects grooves, angles, or gap allowances using a micrometer, caliper, and precision measuring instruments., • Removes rough spots from work piece, using portable grinder, hand file or scraper., • Welds components in flat, vertical, or overhead positions., • Heats, forms, and dresses metal parts using hand tools, torch, or arc welding equipment., • Ignites torch and adjusts valves, amperage, or voltage to obtain desired flame or arc/, • Analyzes engineering drawing and specifications to play layout, assembly, and welding operations., • Develops templates and other work aids to hold and align parts., • Use safe work habits and operate safety equipment properly., • Determines equipment and welding method, applying knowledge or metallurgy, geometry, and welding techniques., • Examine workpieces for defects., • Measure workpieces with straightedges or templates to meet specifications., • Primarily uses stick welding 60-10 and 70-18. Need to be able to certify in 6G position., • Documents tests and inspection dates and results., • Maintains inventory records for welding supplies used and utilized on jobs., • Use straightedges, combination squares, rulers, and calipers to lay out, position, alight, and secure parts and assemblies prior to assembly., • Operate hand and power tools such as shielded metal arc and gas metal arc welding equipment., • Completes work orders, list materials issued and used, and documents work repairs., • Assists area staff as needed., • Ensures that management is appropriately informed of area activities and of any significant problems., • Ensures regulatory requirements and established procedures are met., • Follows safety requirements., • Ensures that work area is clean, secure, and well maintained., • Completes special projects as assigned., • Attends and participates in meetings as required Apprentices shall perform all duties listed above under the guidance of a journeyman mechanic combined with on-the-job training and any additional schooling as required. Requirements: EDUCATION AND EXPERIENCE • High school education/G.E.D., • At least 3 years of experience in welding (Prior certification required). LANGUAGE SKILLS • Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar., • Ability to write complex sentences, using proper punctuation, and using adjectives and adverbs., • Able to communicate in complex sentences, using normal word order with present and past tenses with good vocabulary. QUALIFICATION STANDARDS • Ability to perform essential job functions consistent safely and successfully with ADA, FMLA, and other federal, state, and local standards/requirements., • Ability to meet and maintain all qualitative and/or quantitative productivity standards., • Ability to maintain reasonably regular and punctual attendance consistent with ADA, FMLA and other federal, state, and local standards/requirements., • Compliance with all personnel policies and practices., • Ability to comprehend and carry out safety sensitive duties according to company policies, procedures, and safe work practices.

Job Description Job Title: Welder Job Description This temporary welder position supports mechanical repair and fabrication work at a coal-fired utility plant in Baltimore, MD under onsite supervision. You will perform welding, cutting, grinding, and mechanical repairs primarily inside electrostatic precipitators and other plant structures, often at heights and within confined, dusty, and low-light spaces. The role requires strict adherence to safety procedures, the use of respiratory and fall protection, and the ability to follow detailed work instructions in English. Responsibilities • Perform welding using inner shield, stick, and sub-arc processes on carbon and stainless steel plate., • Grind seams, edges, and surfaces to prepare materials for welding and to complete surface clean-up., • Gouge weld seams and remove hardware as needed to support repair and fabrication activities., • Cut steel parts using an oxy-acetylene torch in a safe and controlled manner., • Operate air chisels and related mechanical tools for metal removal and surface preparation., • Carry and lift tools, equipment, and parts required to complete daily tasks., • Operate forklifts, aerial lifts, and cranes in accordance with safety procedures and training., • Perform internal cleaning of electrostatic precipitators, including mechanical and weld repairs., • Complete repair work inside electrostatic precipitators, including patching holes or cracks in steel casings and hoppers, repairing broken supports or frames, sealing leaking weld seams, and repairing or replacing damaged internal metal components., • Inspect internal steel structures for cracks, corrosion, holes, warped steel, and other defects., • Cut out damaged metal sections and prepare surfaces for installation of new steel., • Fit and weld new steel components to restore structural integrity and ensure proper operation., • Work safely at heights and within confined spaces while using appropriate fall and respiratory protection., • Follow all site safety protocols, including the use of required personal protective equipment., • Read, understand, and follow work instructions in English to complete assigned tasks accurately and efficiently. Essential Skills • Proficient welding skills using inner shield, stick, and sub-arc processes on carbon and stainless steel plate., • Demonstrated ability to perform grinding, gouging, and cutting operations on steel components., • Current OSHA 10 training certification., • Confined space training and the ability to work safely in confined environments., • Ability to traverse stairs and ladders repeatedly throughout the workday., • Ability to wear and work effectively with respiratory protection., • Comfort working at heights while using fall protection equipment., • Comfort working in poorly lit, dusty, or small spaces for extended periods., • Ability to understand and follow work instructions in English., • Capability to safely operate forklifts, aerial lifts, and cranes when assigned. Additional Skills & Qualifications • Experience performing repair work inside industrial equipment such as electrostatic precipitators or similar large steel structures., • fabrication and mechanical repair in heavy industrial or utility environments., • Strong attention to detail when inspecting steel structures for cracks, corrosion, holes, and warping., • Ability to work effectively as part of a crew alongside mechanics and other welders., • Physical stamina to work 10-hour shifts, six days per week in a demanding industrial setting. Why Work Here? You will join a team that values safety, professionalism, and a supportive culture while working on specialized industrial projects. The company provides paid travel time, single-occupancy hotel accommodations, and a daily per diem for meals, helping you maximize your earnings while on assignment. You will gain hands-on experience with complex industrial systems in a structured, safety-focused environment that supports your growth as a skilled welder. Work Environment The work takes place at a coal-fired utility plant in Baltimore, MD, primarily inside electrostatic precipitators and other plant structures that can be dusty, poorly lit, confined, and at significant heights. The crew consists of approximately 10 people, including 5 mechanics and 5 welders. The schedule runs from late October through early December, with work hours of 10 hours per day, six days per week, typically from 7:00 a.m. to 5:00 p.m., with no scheduled off days during the assignment. Personal protective equipment is mandatory and includes hard hat, safety glasses with side shields or other approved eye protection, protective footwear, high-visibility clothing, work gloves, and hearing protection provided on site. Respiratory protection is required when engineering controls do not adequately control dust, fumes, or other airborne contaminants, and fall protection such as harnesses, lanyards, and lifelines is required when exposed to fall hazards. The environment is industrial and safety-driven, with a clear expectation to follow all site rules, use all required PPE, and maintain a professional appearance consistent with industrial safety attire. Job Type & Location This is a Contract position based out of Baltimore, MD. Pay and Benefits The pay range for this position is $25.00 - $35.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract position based out of Baltimore, MD. Application Deadline This position is anticipated to close on Nov 17, 2026. Workplace Type This is a fully onsite position in Baltimore,MD. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Sanitary welder pipe fitter industrial food and beverage setting working with stainless pipe doing repairs inside storage tanks And new pipping installations

Job Description About the Company Founded in 1989 and headquartered in Sparrows Point, Maryland, North American Millwright Services (NAMS) is a privately held industrial services and solutions provider with more than 35 years of experience delivering high-quality, precision work. We specialize in fabrication, general contracting, heavy hauling, industrial maintenance, machinery installation, plant relocation, process piping and welding, rigging, and warehousing, supporting complex, mission-critical operations across a wide range of industries. NAMS operates throughout the Chesapeake region, including Delaware, Maryland, Virginia, and West Virginia, and continues to expand our geographic footprint and service capabilities beyond these areas. Our work combines skilled craftsmanship, modern equipment, and a strong safety-first mindset to deliver reliable, efficient results. As we grow, we remain committed to investing in our people, advancing our technical capabilities, and fostering a professional, team-oriented culture where employees can build long-term careers within a stable and expanding organization. Company Website: namillwright.com Benefits • Medical, Dental & Vision Coverage, • Company-Funded Health Reimbursement Arrangement (HRA), • 401(k) Retirement Plan with up to 8% Match, • 100% Company-Paid Life Insurance, • 100% Company-Paid Short & Long-Term Disability, • Employee Assistance Program (EAP), • Referral Bonus Program, • Paid Time Off (PTO), • Paid Holidays, • Ongoing Professional Training & Development, • Opportunities for Advancement Job Summary The sanitary pipe welder position involves fabricating, fitting, and GTAW/TIG welding stainless steel process piping for food, beverage, or pharmaceutical industries. Duties and Responsibilities • Adheres to all NAMS policies and OSHA regulations, • Takes swift action to stop any imminent danger situations you may encounter, • Promptly reports all accidents and near misses, including minor first aid and property damages prior to end of shift, • Conducts daily workplace exams; identifies and promptly resolves potential hazards or immediately barricades area or equipment and contacts NAMS and/or the customer’s safety team to resolve Perform high-purity TIG (GTAW) welding on stainless steel sanitary tubing and piping (typically 304L or 316L) Perform purge welding to ensure zero oxidation on the inner diameter of the weld Read and interpret isometric drawings, piping and instrumentation diagrams, and blueprint schematics Fit and fabricate piping assemblies, ensuring precise alignment and sanitary standards with smooth, flush joints Grind, polish, and finish welds to meet sanitary surface roughness requirements Adhere to ASME PBE standards and Food & Drug Administration (FDA) requirements • Conduct self-inspections of welds including borescope inspection, • Performs other duties as assigned. Requirements and Qualifications • High school diploma or GED; technical trades training a plus, • 1 year of relevant experience in sanitary pipe welding (food, dairy, pharma), • Proficiency in GTAW/TIG welding process, specifically on thin-wall stainless steel, • AWS certification preferred (6G), • Experience with automated orbital welding equipment preferred, • Strong knowledge of purge welding techniques, • Ability to read blueprints and isometric drawings, • Must be able to pass a weld test, including x-ray or coupon testing, • Strong analytical and problem-solving skills, • Good physical condition and stamina, • Forklift and mobile elevated work platforms experience required, • Valid Driver’s License with an acceptable driving record, • Ability to use a variety of tools including blowtorches, saws, pipe benders, and welding torches; owns tools needed to perform tasks Physical Requirements: • Frequently required to walk, sit, stand, balance, stoop, bend, push, pull, lift, reach, kneel, crouch, crawl and climb stairs/ladders and use of hands, • Prolonged periods standing and stretching to install and repair pipes and pipe fittings, • Must have vision, hearing, and ability to talk, • Ability to work in confined spaces, at heights, and lift up to 50 pounds, • Exposure to hot/cold temperatures, • Comfortable working in industrial environments, including food processing plants North American Millwright Services, Inc. is an equal opportunity employer

Job Description WHO WE ARE Kinsley Construction is a full-service construction company committed to doing right by our people, right by our roots, and right by you. Operating throughout the Mid-Atlantic Region, we serve clients in a variety of industries. From Building, Civil, and Industrial construction, we do what it takes to get the job done and done right. If you want to leave your mark, take pride in what you do each day, and create something to show off to your family - then join ours. WHY KINSLEY CONSTRUCTION? • Competitive salary and benefits package; including Single and Family Medical Insurance/Dental/Vision, Short/Long Term Disability, Life Insurance, 401K Plan with company match, (9) paid holidays, and up to (20) days PTO., • Eligible field employees can earn additional hourly pay through our Incentive Zone Pay program, based on job site location and distance from home., • Opportunities for career advancement and professional development., • A collaborative and inclusive work environment., • A company committed to safety, quality and efficiency in all projects., • The chance to be part of a respected construction company with a long history of excellence. SUMMARY OF POSITION Kinsley is seeking Concrete Workers, Millwright/Welders, and Working Millwright Foremen based out of our North East, MD office. Our work spans deep foundations, heavy industrial concrete projects, machinery moving, facility relocations, plant maintenance, and installation of material handling systems. We’re looking for experienced, motivated individuals who can contribute hands-on in the field, with the Foreman role providing leadership and direction to crews while actively working alongside them. Employees will be based out of Kinsley's North East, MD office but travel in the mid-Atlantic region for projects will be required. Kinsley will provide hotels and transportation for this required work-related travel. When you work for Kinsley, your time and travel matter. Our competitive wages and Incentive Zone Pay program help ensure employees are fairly compensated based on where the work takes them. Kinsley offers an Incentive Zone Pay program for hourly field employees, providing additional hourly compensation based on the distance traveled from an employee’s home address to the job site (up to $5.00/hour), on top of base wages. Please note that this position is considered safety sensitive in accordance with Kinsley Construction policies and procedures. TYPICAL RESPONSIBILITIES/ESSENTIAL FUNCTIONS Concrete Worker • Use and/or assist with instruments for precise layout., • Perform excavation and backfill., • Non CDL truck driving is required., • Perform formwork, placement of anchor bolts and placement of embeds., • Perform placement of rebar., • Perform placement of concrete including large mass pours, foundations, formed piers, formed walls, supported slabs and small areas of slab on grade., • Perform other related duties and responsibilities as required. Millwright/Welder • Use instruments for precise layout., • Perform rigging work including jacking, skating, heavy forklift operation and loading/unloading trucks., • Perform steel erection including shake out, connections and detail work., • Perform installation of miscellaneous metals, • Perform installation of conveyors, dryers, and other material handling equipment, • Perform installation of equipment and piping in Water and Wastewater Treatment Plants, • Field verify dimensions and perform field fabrication and fitting., • Working at heights utilizing ladders, man lifts, etc. is required., • Must be willing to work some weekends as needed for client shutdowns., • Must be willing to travel for “out of town” jobs as needed and some will require overnight stay. Millwright Foreman • Ensure job sites follow safety standards through the implementation of high-quality work practices., • Lead and manage crew members to complete specific projects., • Delegate responsibilities and individual tasks to crew members., • Oversee and train new crew members., • Communicate and report job status effectively., • Utilize instruments for precise layout as needed., • Supervise rigging work including jacking, skating, heavy forklift operation, and loading/unloading trucks., • Oversee steel erection including shake-out, connections, and detail work., • Supervise the installation of dust collection systems, conveyor systems, and various industrial equipment., • Verify dimensions and supervise field fabrication and fitting., • Communicate and interface with clients, maintaining Kinsley’s reputation as a top-tier contractor., • Read and interpret drawings, plans, and blueprints, and convey this information to others., • Identify and research adequate resources, labor, and equipment, to complete projects efficiently., • Perform other related duties and functions as needed. REQUIREMENTS • High school diploma or GED., • 5+ years of field experience as a millwright/rigger for millwright position., • Previous experience directing a workforce for millwright position., • Experience with equipment installation, specifically in “heavy industry” and/or the erection of mining equipment., • Comprehension of construction drawings is required for the concrete position., • Must be familiar with all means of placement and curing of concrete for the concrete position., • Willingness to work weekends as needed for client shutdowns., • Willingness to travel, with overnight stays as necessary., • Ability to work at heights utilizing ladders, man lifts, etc., • Proficiency in operating man lifts, forklifts, telehandlers, skid steer loaders, cranes, etc., • Understanding of construction drawings., • Familiarity with working around cranes and hand signals, • Strong communication skills along with the ability to multitask., • A valid driver’s license and the ability to pass a DOT physical. HOW TO APPLY If you are interested in a position at Kinsley Construction, please apply on our website at https://careers.kinsleyconstruction.com/ or mail, fax, or email a resume including salary requirements to: KINSLEY CONSTRUCTION, LLC. PO BOX 2886 YORK PA 17405 717-815-6909 (Fax) careers@kinsleyconstruction.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER

Job Description The TSS Group is looking to hire qualified millwrights/welders for our Plant Maintenance Division. Our Plant Maintenance Division works on fixed structures in stone and sand quarries. We are looking for millwrights/welders with experience in stick and mig welding. Pipe and plate fabrication. Experience in millwright work including conveyor systems, gearboxes and bearings is preferred. The TSS Group works in quarries along the east coast. This position would require occasional travel and nightwork. \nCompany Description The TSS Group builds and maintains the fixed equipment that processes aggregate in quarries and other aggregate plants. The TSS Group builds and maintains the fixed equipment that processes aggregate in quarries and other aggregate plants.

Job Description Sr. / Principal Welding Process Engineer Location: 203A Log Canoe Circle, Stevensville, MD 21666-2128 Work Hours: 8:00 AM to 5:00 PM, Monday through Friday Salary: $116,000 - $156,000/yr. Hydrasearch, a proud affiliate of The Dixon Group, is looking for a Sr. / Principal Welding Process Engineer to join our team in Stevensville, MD! In this role you will be a senior technical contributor responsible for developing welding and joining capabilities that support Hydrasearch's aerospace, naval, and defense programs. This role focuses on solving complex manufacturing capability gaps and establishing the technical infrastructure required for growth in regulated markets. This is a hands-on engineering capability development role centered on process development, qualification, and technical problem solving. You will work within a small, highly capable technical team executing rapid cycles of development, validation, and production transition. The successful candidate must balance the speed of a "builder" environment with the technical rigor required to maintain compliance. At Hydrasearch, we value the contributions of our Military Veterans and proudly employ our nation’s heroes. Veterans are strongly encouraged to apply. What You'll Do: • Capability Creation: Identify and solve manufacturing capability gaps limiting growth and develop internal welding knowledge and standards., • Hands-on Development: Drive rapid cycles of welding procedure development (WPS), procedure qualifications (PQR), and personnel qualifications (WPQ)., • Technical Authority: Interpret and apply AWS, ASME, NAVSEA, and customer-specific welding requirements., • Design for Weldability: Provide early technical input to development teams to ensure manufacturability and prevent late-stage rework., • Special Processes: Support the development of joining processes including welding, brazing, and tube joining., • Strategic Transition: Support "make vs. partner" decisions and ensure the clean transition of qualified processes into production. What We're Looking For: • Education: Bachelor’s degree in Welding Engineering, Mechanical Engineering, Materials Engineering, or a related field., • Experience: 10+ years or equivalent experience in welding engineering or welding process development within compliance-driven manufacturing environments., • Technical Expertise: Deep knowledge of welding metallurgy, various welding processes, and inspection methods (VT, PT, RT, UT)., • Procedure Qualification: Extensive experience qualifying welding procedures and developing welder certification programs., • Compliance Knowledge: Thorough understanding of AS9100 special process requirements., • Execution Mindset: A "builder" mindset with a bias toward execution over discussion and the ability to work effectively in small, fast-paced teams., • Travel: Travel my be required, both domestically and internationally.Preferred Qualifications, • Defense Standards: Experience with defense or naval welding standards, specifically NAVSEA Tech Pub 248/278., • Industry Certifications: Certified Welding Engineer (CWE) or relevant AWS credentials., • Regulatory Excellence: Experience preparing for and supporting NADCAP welding process audits., • Aerospace Proficiency: Working knowledge of AWS D17.1 and D17.2 for aerospace welder qualification., • Specialized Joining: Exposure to brazing and tube joining processes in high-mix, low-volume environments. What We Offer: • Medical, dental, and vision insurance for you and your family, • Competitive salary, • Bonus programs, • 401K retirement plan, • Training opportunities, • Tuition reimbursement, • Paid vacation, PTO, and holidays, • Gym reimbursements, and more! Who We Are: Hydrasearch is a U.S. manufacturer specializing in fluid-transfer and control systems for maritime, aerospace, and defense applications. Since its founding in 1962, Hydrasearch has developed capabilities in hose assemblies, valve fittings, and customer machined parts, often to meet MIL-SPEC and naval standards. We do not provide sponsorships to work in the United States. Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)Please contact us at (410) 778-2000 or hr@dixonvalve.com if you need help to participate fully in the application process.

Job DescriptionWelders Baltimore, MD area We are currently seeking experienced Pipe Welders in the Baltimore, MD area for a heavy industrial contractor. Candidates must be familiar with stainless steel and TIG welding for pressurized piping systems. Responsibilities: • The ability to pass an ASME 6G 6 " Carbon Steel SMAW Pipe Test is a plus., • Work involves butt weld and socket weld of stainless-steel process piping (SCH 10, SCH 40, SCH 80 wall thickness). Socket Weld up to 2 " diameter. Butt-weld up to 8 " diameter. Welding will be performed in various positions, at various heights. Some welding work will be performed out of man lifts and/or scissor lifts., • Ability to set up the welding rig to your preferences, based on the environment and material being welded., • Work will take place in a variety of industrial manufacturing facilities. Requirements:, • Flexibility to travel between projects on a daily and/or weekly basis., • Driver's License and have reliable transportation to and from the jobsite within the DMV area., • Willing to work at least 40 hours per week (Mon – Thu on a (4) 10's schedule), with the flexibility to work overtime as required. Some night shift may be required, which is dependent on client needs. Experience:, • 2-5 Years previous construction experience, preferably as a Mechanical Contractor or Prime Contractor in an industrial environment., • Understanding of plans, specifications, P&IDs, and ISOs., • Self-Starter – Ability to work alone on a project, and as part of a team., • Effective verbal communication skills. The pay range for this position is $25 - $32 per hour w/ PTO, medical and dental insurance, 401(k) plan, and 8 paid federal holidays. If interested please apply to this ad or you can send your resume directly to Brittany at brittany@csrecruiting.com.

Job Description Tig welder with 2-5 years experience, Mig background also helpful. 4 or 5 day schedules available. Pay rate dependent on experience and welding/aptitude testing. Please send resume through Ziprecruiter and respond to request for interview and testing. \nCompany Description Novatec, Inc. has been a leader in drying, conveying, and material handling systems for the processing industries for over 75 years. NO PHONE CALLS DURING INITIAL APPLICATION PROCESS PLEASE. SCREENING IS FROM YOUR ZIPRECRUITER RESUME. Candidates will be contacted directly. Novatec, Inc. has been a leader in drying, conveying, and material handling systems for the processing industries for over 75 years. \r\n\r\nNO PHONE CALLS DURING INITIAL APPLICATION PROCESS PLEASE. SCREENING IS FROM YOUR ZIPRECRUITER RESUME. Candidates will be contacted directly.

Job DescriptionDescription: The Welder/PipeFitter is responsible for the installation and repair of industrial Boilers and Compressed Air Systems. Requirements: ATTEND REQUIRE VENDOR TRAINING AND COMPANY SPONSORED CLASSES MAINTAIN TRUCK STOCK INVENTORY- REPAIR PARTS, RELATED RECORDS CONCERNING TIME, LABOR, MATERIAL LOGS OF TASKS PERFORMED, AND MAINTAIN INTERIOR AND EXTERIOR VEHICLE CLEANLINESS PREPARE SERVICE TICKETS FOR ALL WORK PERFORMED ASSIST INSIDE SALES OR SALES BY IDENTIFYING AND REPORTING SALES LEADS, TRAINING LESS EXPERIENCED PERSONNEL DRIVE IN A MANNER THAT ADHERES TO TATE’S FLEET SAFETY PROGRAM JOINS, FABRICATES, AND REPAIRS METAL AND OTHER WIELDABLE MATERIAL, AND ANCILLARY EQUIPMENT BY APPLYING APPROPRIATE WELDING TECHNIQUES ENSURES PROPER FUNCTION AND SAFE OPERATION OF THE EQUIPMENT BY RECOMMENDING WELDING TECHNIQUE, ARRANGEMENT, AND ASSEMBLY OF PRODUCT THROUGH ANALYZING ENGINEERING DRAWINGS AND SPECIFICATIONS. UTILIZE MIG/TIG STICK WELDING TECHNIQUES AS WELL AS BRAZING AND SOLDERING, PIPEFITTING, RIGGING AND OTHER MECHANICAL TECHNIQUES.

Job Description WELDER/SHEET METAL FABRICATOR Sessa Sheet Metal is a busy Commercial HVAC Sheet Metal Fabrication & Installation company in the Baltimore, Maryland area looking to hire a Sheet Metal Fabricator/Welder for an open position in our shop and field. The Company: Sessa Sheet Metal, Inc. is a dynamic and innovative company that has been a staple in the Maryland, DC, and Virginia regions since 1980. With over 45 years in the business, Sessa is known for their creative and state-of-the-art sheet metal solutions and they offer a compelling opportunity for potential candidates. The company prides itself on its advanced technological capabilities. Additionally, the facility includes a comprehensive range of departments such as welding, CNC Auto-Brake bending, layout and cutting, and sealing and finishing, providing a rich environment for skill development and professional growth. For candidates, this means a wealth of opportunities to learn and expand their expertise. Some may appreciate the stability and reputation of a company established over four decades ago, while others might be drawn to the growth potential and innovation fostered by their investment in advanced technology. Welders MUST meet the following requirements: Skilled in welding and fitting 18-10 ga Steel - Mig only. Types of metal are Black Iron, Stainless Steel, Galvanized and Aluminum. All welding supplies will be provided on site. Typical hand tools to work the metal shall be the employee’s responsibility. Company vehicle not provided. Welding Certifications Required. Specifically, AWS D901 Sheet Metal Welding. • 3 yrs. exp. Mig only, • Galv/SS/Alum.050, • Reliable Transportation, • Able to Pass Criminal Background Check & Drug Screening, • Current Valid Driver’s License/Reliable transportation to work sites if needed Benefits Offered: • Competitive base pay (paid weekly), • Paid vacations, sick time and holidays (designated), • Medical, Dental, and Vision insurance, • Life Insurance, • Long/Short Term Disability, • Retirement 401(K) plan, • Employee Stock Option Plan (ESOP) to allow you to own a part of the business. This is an exciting time to join Sessa and see first-hand how we invest in our people to grow our business. Apply today! PHYSICAL JOB DEMANDS AND WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit, stand, walk, talk, hear, drive, kneel, stoop, reach, bend, climb, touch and grasp, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and also work at heights. The employee must occasionally lift and/or move up to 50 pounds. Special vision abilities required by this job include close vision, depth and peripheral vision, and the ability to adjust focus. Exposure to varying weather conditions, indoor/outdoor environments typical of construction sites, and the possibility of working in confined spaces and at heights. The noise level in the work environment, particularly when in the field, can vary significantly and at times be very loud. The above statements are intended to describe the general nature and level of the work being performed by the individuals assigned this position and are not intended to be exhaustive of all duties, responsibilities, knowledge, skills, abilities, physical job demands and working conditions. Sessa Sheet Metal is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, color, religion, sex, sexual orientation, gender identity, national origin, age, status as a protected veteran, or disability.

Job Description Welder- Start ASAP- Weekly Pay Location: Baltimore, Maryland Pay: $28-$35/hour We are seeking skilled welders or entry level welders to join our team at a coal-fired utility plant in Baltimore, MD for a temporary 6 week project. This role involves working at heights and within confined spaces, where you will be tasked with precipitator internal cleaning, mechanical repairs, and weld repairs. You will play a critical role in maintaining the electrostatic precipitator, ensuring the efficiency and safety of the plant's operations. Responsibilities: • Inspect the interior for cracks, corrosion, holes, and warped steel., • Cut out damaged metal and weld new steel in place., • Patch holes or cracks in steel casing and hopper., • Repair broken supports or frames and seal leaking weld seams., • Repair or replace damaged internal metal components. Essential Skills: • Proficiency in welding and fabrication., • OSHA 10 certification and confined space training., • Ability to traverse stairs and ladders., • Comfortable with working at heights and in poorly lit or small spaces., • Ability to understand work instructions in English. Additional Skills & Qualifications: • Experience in using respiratory protection., • Familiarity with safety equipment and protective clothing. Why Work Here? Enjoy benefits such as paid travel time, single person hotel accommodations, and a daily per diem for food. Our company culture is supportive and emphasizes teamwork and safety. Work Environment: You will work in a demanding environment requiring hard hats, safety glasses with side shields, protective footwear, high-visibility clothing, and hearing protection. Respiratory protection is essential when engineering controls cannot adequately manage dust, fumes, or other airborne contaminants. Fall protection gear such as harnesses, lanyards, and lifelines are mandatory when exposed to fall hazards. Job Type & Location This is a Contract position based out of Baltimore, MD. Pay and Benefits The pay range for this position is $25.00 - $35.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract position based out of Baltimore, MD. Application Deadline This position is anticipated to close on Nov 17, 2026. Workplace Type This is a fully onsite position in Baltimore,MD. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description *Benefits Eligibility: This position is eligible for benefits beginning the first of the month following your hire date. *Recruiting Agencies: Thorpe Specialty Services does not accept unsolicited resumes from recruiting agencies. The Pipefitter - welder is responsible for the layout, assembly, installation, maintenance, welding, fabrication and repair of piping systems in industrial and heavy commercial environments, supporting projects related to facilities, new construction, and renovations. This role requires a high degree of skill in interpreting piping drawings and specifications, cutting and fitting pipe, and ensuring systems are installed to meet industry and project standards for safety and quality. Role and Responsibilities • Read and interpret blueprints, isometric drawings, P&IDs, and specifications to determine piping layout and work procedures., • Measure, cut, thread, bend, and weld pipes using hand tools, machines, and welding equipment., • Install, modify, and repair various types of piping systems including carbon steel, stainless steel, alloy, and non-metallic piping., • Select proper materials, supports, and jointing methods based on project specifications and environmental conditions., • Coordinate installation with other trades, such as scaffolders, insulators, and corrosion technicians., • Perform pressure testing, leak testing, and inspections of completed piping systems., • Follow company and customer safety policies, including proper use of PPE, fall protection, confined space entry, and hot work procedures., • Assist with rigging and lifting pipe and materials using cranes or other lifting devices., • Document work completed, material usage, and any deviations from plan., • Load, transport and unload materials, tools, equipment and supplies., • Secure pipe to structure with bracket, clamps and hangers using proper hand and power tools., • Assembles and installs a variety of metal or nonmetal pipes and pipe fittings, using threaded caulked, soldering, brazen, fused, or cemented joints, and hand tools., • Support other industrial services work (refractory, corrosion, rubber lining) as needed depending on project demands., • Perform other duties as assigned.Qualifications and Education Requirements, • 4+ years of industrial pipefitting experience, preferably in heavy industrial or petrochemical environments., • 2+ years of welding experience in an industrial or construction environment., • Proficiency with SMAW, TIG, and MIG welding techniques., • Welding certifications preferred (or ability to pass company-administered weld tests)., • Experience with various piping materials and joining techniques, including welding, flanging, threading, braising, soldering and grooved connections., • Ability to read and interpret technical drawings and specifications., • Familiarity with OSHA standards and industrial safety practices., • Experience with VRF systems (preferred but not required)., • Experience with hydronic, steam, refrigeration piping processes with cooling towers, chillers, boilers and large roof top equipment., • NCCER Pipefitter Certification or equivalent (preferred but not required). Physical Requirements The physical demands described below are representative of those required to perform the essential functions of this role. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform these essential functions. Thorpe will engage in an individualized, interactive process to evaluate accommodation requests, including those arising from a workplace injury or workers’ compensation claim. This position requires the frequent exertion of up to 50 pounds of force to lift, carry, and manipulate materials and equipment, along with regular work in confined spaces and at heights, consistent with the U.S. Department of Labor’s Heavy Work classification. For purposes of this description: “Occasionally” means up to 1/3 of the work shift; “Frequently” means 1/3 to 2/3 of the work shift; and “Constantly” means more than 2/3 of the work shift. • Standing/Walking/Bending/Squatting/Crawling: Frequently required to stand, walk, bend, squat, and crawl for extended periods while installing and fitting pipe systems., • Climbing/Elevated Work: Frequently required to climb ladders and scaffolds and to work on elevated platforms, scaffolding, or lifts., • Confined Spaces: Frequently required to work in confined spaces., • Lifting/Carrying: Frequently required to lift, carry, and manipulate materials and equipment weighing up to 50 pounds; occasionally required to handle heavier loads with mechanical assistance or a second person., • Manual Dexterity: Frequently required to use hand tools and pipefitting equipment with precision., • Vision/Hearing: Requires vision sufficient to read labels, safety warnings, and guidelines; hearing sufficient to receive instructions and communicate with co-workers., • Environmental Conditions: Regular exposure to varying environmental conditions, including heat, cold, noise, dust, and hazardous materials., • PPE Usage: Required to wear and properly use personal protective equipment as dictated by site conditions and applicable regulations., • Work Schedule: Must have the stamina to work long shifts, including overtime, nights, weekends, or holidays, depending on project needs. Return-to-Work and Modified Duty An employee returning from a work-related or non-work-related injury or illness must provide medical documentation, as requested, describing any functional limitations or restrictions. The Company will compare the employee’s documented restrictions against the essential functions described above and, where feasible and consistent with business necessity, consider temporary modified-duty or light-duty assignments. Availability of modified duty is evaluated on a case-by-case basis and is not guaranteed for any specific position or duration. Employees are expected to cooperate with the Company’s return-to-work process, including attending scheduled medical evaluations and providing timely updates on their fitness-for-duty status. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training, and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employment at Thorpe Specialty Services Corporation is on an “at-will” basis. There is no contract of employment between Thorpe Specialty Services Corporation and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Thorpe Specialty Services Corporation and its affiliates provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, nationalorigin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Senior Welder Location: 250 Dixon Drive, Chestertown, MD, 21620 Work Hours: 6:00 AM - 2:30 PM, Monday through Friday Pay Range: $35.00 - $40.00/Hour Make the Right Connection—Build Your Career with Dixon! The Dixon Group is seeking a Senior Welder to join our team! We are expanding our production team at the Creekside facility and are looking for a highly skilled Welder to manufacture Swivel Joints and Loading Arms. We are seeking a dedicated functional expert who can step in and make an immediate impact. If you have extensive experience in open groove pipe welding to ASME Section IX standards and take pride in your craftsmanship, we want you on our team. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation’s heroes. Veterans are strongly encouraged to apply. What You'll Do: • Performing high-quality MIG and TIG welding on industrial fluid transfer products., • Executing precision pipe welds ranging from 1” to 24” in diameter., • Working with a wide variety of metals, from aluminum to stainless steel., • Fabricating structural components accurately to meet detailed production prints and CAD drawings., • Preparing materials for welding through sandblasting, grinding, and manual machining., • Utilizing your expertise to train, coach, and support less experienced welders on the production floor. What We're Looking For: • 5 to 10 years of professional production welding experience., • Demonstrated proficiency in both TIG and MIG welding is mandatory., • Must be highly competent in performing Open Groove Pipe Welds to ASME Section IX Standards., • Previous experience as a welder, fabricator, or pipe fitter in related industries (e.g., energy/power generation, manufacturing/chemical processing, oil and gas refineries, or commercial infrastructure) is highly preferred., • Active welding certifications, particularly those revolving around pipe welding, are a strong plus., • Experience with structural welding and reading production prints/CAD is highly beneficial., • We are looking for a detail-oriented, enthusiastic self-starter who is dedicated to safety, quality, and teamwork. What We Offer: • Medical, dental, and vision insurance for you and your family, • Competitive salary, • Bonus programs, • 401K retirement plan, • Training opportunities, • Tuition reimbursement, • Paid vacation, PTO, and holidays, • Gym reimbursements, and more! Who We Are: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. Join us and be a part of a team that values your contributions and supports your goals! We do not provide sponsorships to work in the United States. The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Job DescriptionDescription: Hiring is contingent upon award of contract The Lead Welder is a Working Leader who provides dual capability as a highly skilled technician and a project coordinator. This role is responsible for driving production planning, managing multi-project crew workflows, interfacing with engineering teams, and ensuring rigorous adherence to industrial safety and American Welding Society (AWS) specifications. Key Responsibilities • Fabrication Architecture: Develop comprehensive, structured, start-to-finish fabrication plans featuring sequential or parallel tasks directly from engineering drawing packages., • Resource & Timeline Management: Dynamically modify shop blueprints and project schedules based on real-time resource availability and shifting timelines., • Engineering Liaison: Interface directly with the engineering team to proactively resolve design discrepancies., • Problem Resolution: Diagnose and troubleshoot floor-level fabrication issues, including scheduling delays, weld repairs, material anomalies, and fitting constraints.Requirements: Minimum Qualifications • Core Technical Experience: Minimum 10 years of experience in:, • Reading 3D models, engineering blueprints, drawings, and weld symbols to plan/fabricate multi-stage projects., • Utilizing precision instruments (transits, laser range meters, measuring tapes) for complex layouts., • Joint design and fabrication following AWS codes for structural building construction., • Material Competency: Working knowledge of structural steel properties, including high-strength carbon steel, low-alloy steels, and heat-treated constructional steels., • Leadership & Safety: At least 10 years of leading multi-project scopes/crews, 5 years of workplace safety oversight, and 5 years of task planning and job assignment planning., • Prerequisite Skills: Must meet all baseline qualifications for the Experimental Welder position., • Mandatory Certifications:, • Must be certified as an AWS Certified Welding Inspector (CWI) with 5 years of Non-Destructive Testing (NDT) application experience., • Must be certified to safely operate bridge cranes up to a 15-ton capacity. Secret Clearance Required

Job Description JOB SUMMARY: The Welder/Fitter works with the rest of the Construction Department on commercial projects, and is responsible for reviewing drawings, doing lay-out, and assembling pipes accurately and according to production standards, quality requirements, safety requirements, code, design, and specifications. As a full-time member of our field workforce, the Welder/Fitter will travel to different job sites, going where work is needed in the greater Metropolitan Washington area. REQUIREMENTS: • Able to work Monday-Friday with occasional overtime during afternoons, evenings and weekends as needed. Hours may involve start times as early as 5:00 a.m. NOTE: Specific project requirements that may require afternoon or evening/night shifts., • Effective interpersonal skills, including ability to work with diverse sets of team members and resolve conflict professionally with the assistance of management., • Interface effectively, ethically and professionally with co-workers and clients and subcontractors., • Communicate effectively in English (aural, verbal, and written)., • 5 of more years of commercial construction and welding/pipefitting experience., • Able to sit, stand, bend, walk, climb, and remain in static positions for duration of shift. This includes use of ladders, potential exposure to confined spaces and heights., • Able to lift five pounds (50 lbs.) without assistance. NOTE: Additional weight may be required, but will be with assistance., • Possess current, valid driver’s license (not under suspension or limitation), and access to transportation to drive to various job site locations., • Able to withstand temperature extremes and exposure to elements (rain, snow, etc)., • Able to withstand exposure to dust, fumes, and other particulates. NOTE: Respiratory protection is available., • Welder Certification that meets the requirements of Section IX of the ASME Code. NOTE: All candidates will be tested; certification will be a condition of employment., • Willing and able to learn new tasks., • Read and comprehend drawings and diagrams, blueprints, sketches, fabrication/spool drawings, CADD drawings and submittals., • Based on drawing and diagrams, able to lay-out work., • Basic arithmetic and geometric skills, including calculating offsets, including for miter pipe and/or fittings., • Able to read and understand spool drawings, to properly tag piping., • Able to comply with federal, state, local and project-based safety specifications, including use of specialized Personal Protective Equipment (PPE) and processes., • Strong knowledge of mechanical systems and equipment functions. -PREFERRED: Knowledge of mechanical systems. • PREFEERED: U.S. Citizens who will be cleared for a secured government site. RESPONSBILITIES: • Work with Foreman and apprentices on all piping aspects of job., • Use drawings, diagrams, etc., to complete tasks., • Assist with coordination of any Pre-Fabrication layout or installation., • Maintain current knowledge of applicable federal, state, and county codes., • Assist with rigging of material. NOTE: Will require rigging training., • Comply with all OSHA, EM 385 regulations and Shapiro & Duncan Safety Program., • Assist in maintaining rental and company-owned welding equipment., • Maintain equipment (tips, nozzles, grinding wheels, etc.); notify foreman when stock is low., • Layout work ahead of welders, and prepare all pipe and fittings for welding., • Work alongside welder in holding and positioning pipe/fittings to be welded., • Performs other tasks and duties as assigned by supervision. Benefits Summary: Premium Healthcare Options • Free Healthcare, • Medical, • Dental, • Vision Discounts, • Flexible Spending Accounts, • Health Savings Accounts Your Financial Future • 401(k) Match, • Company Paid Life Insurance, • Company Paid Long Term Disability, • Performance Bonus, • Gainshare Work/Life Balance • Paid Time Off, • 8 Annual Holidays, • Engaging Team Activities, • Health & Wellness Program Equal Opportunity Employer, including disabled and veterans. \nCompany Description A third generation family-owned business, Shapiro & Duncan has been serving customers in DC, Maryland and Virginia since 1976. The company is known for their award-winning company culture and complex commercial, government and institutional design-build projects that require first-rate performance, work quality and customer service. We specialize in full service mechanical solutions which include engineering, coordination, prefabrication assembly, construction, service and maintenance. A third generation family-owned business, Shapiro & Duncan has been serving customers in DC, Maryland and Virginia since 1976. The company is known for their award-winning company culture and complex commercial, government and institutional design-build projects that require first-rate performance, work quality and customer service. We specialize in full service mechanical solutions which include engineering, coordination, prefabrication assembly, construction, service and maintenance.

Job DescriptionDescription: Chesapeake Shipbuilding is looking for a Steel Erector to join our shipbuilding team. We’re seeking a safety-minded, hardworking individual with a strong production focus who can help build the structural backbone of our cruise ships. Why Should You Apply? • Competitive Pay: $21.00/hr - $30.00/hr depending on experience and weld test, • $1,000 Sign-On Bonus: Paid in two installments after 60 and 180 days of continuous employment for eligible full-time positions., • Employee Referral Bonus: Earn $500 for each referred candidate who is hired., • Comprehensive Health Benefits: Medical, dental, and vision coverage available for employees and their families. Full-time employees are eligible beginning the first day of the month following their start date., • Company-Paid Insurance: $20,000 AD&D life insurance and short-term disability coverage provided at no cost to full-time employees., • Health Savings Account (HSA): Available for eligible employees., • 401(k) with 5% Company Match: Available for full-time and part-time employees., • Paid Holidays: Six company-paid holidays each year., • Paid Sick and Vacation:, • 80 hours during your first year, • 96 hours after 1 year, • 144 hours after 5 years, • 168 hours after 10 years, • Career Growth Opportunities: Advance within your department or explore opportunities across the shipyard while working with a supportive and empowered team., • Overtime Opportunities: Available for hours worked beyond 40 per week. ABOUT THE JOB: This opportunity is a full-time and benefits-eligible position. REPORTS TO: Fitting Supervisor/On-Site Foreman/Shipyard Superintendent MAJOR RESPONSIBILITIES: Safely and efficiently perform general carpentry labor to complete construction associated with building cruise ships. Have an aggressive work ethic with a focus on production. ESSENTIAL FUNCTIONS & TASKS: • Perform tack welding to secure components or parts in preparation for full welding., • Ensure accurate alignment of workpieces based on blueprint specifications., • Erect the frames, beams, longitudinal and stiffening members that are the core structures of cruise ships., • Install structural outfit items, doors, ladders, foundations., • Tack welding with stick and semi-automatic welding equipment. (preferred), • All other duties as required. KNOWLEDGE: • Proven experience as a Stick Welder with a focus on tack welding., • Proficiency in reading and interpreting blueprints, welding symbols, and specifications., • Strong attention to detail and precision in tack welding., • Familiar with crane hand signs. (preferred), • Safe use of all tools and equipment., • Ability to work independently and as part of a team. Requirements: PHYSICAL REQUIREMENTS: • All types of physical movement are required for this position to successfully perform the essential functions, • Ability to use upper and lower extremities, • Ability to work outside in heat, inclement weather, and cold, • Ability to traverse uneven terrain, including loose pack gravel, • Ability to crawl, kneel, crouch, climb, and bend around and under equipment, on ladders up to 24' at heights up to 70', stairs, scaffolds, through small accesses, enter inside of tanks, and confined spaces, through hatches, and manholes throughout much of the work shift, • Ability to work over bodies of water, • Operate in isolation within the skeleton of ships, wearing heavy protective gear and carrying equipment weighing up to 75lbs, • Ability to safely wear and use required personal protective equipment (PPE), including respiratory protection, safety glasses, welding shields, grinding shields, gloves, life jackets, harnesses, hard hats, and other task- or area-specific PPE, as applicable. Employees required to wear tight-fitting respiratory protection must maintain facial hair in a manner that does not interfere with the respirator’s sealing surface or proper fit, in accordance with applicable respiratory protection requirements. MENTAL REQUIREMENTS: Normal level of visual acuity needed. Must be able to understand and follow directions. Normal hearing level needed. Hand-eye coordination required HAZARDS: Weather, fumes, high noise levels, moving mechanical parts, equipment, and vibration. SHIFT: • Monday – Friday, • Day Shift: 6:00am – 2:30pm, • Evening Shift: 3:00pm – 11:30pm Overtime and Weekend required based on business needs

TIG & MIG Welder Do you like cars? Do enjoy drag racing or NASCAR? Are you interested in being a part of a dynamic, industry-leader in the race world? Then it’s time to bring your talent to ATI Racing and start your career building the parts that drive the machines of dreams! Monday thru Thursday

Job DescriptionMobile Utility Fleet Service Technician — I-70 Corridor (Baltimore/Hagerstown, MD) Custom Truck One Source (CTOS) is looking for a field-savvy technician who thrives on solving complex equipment challenges right where the work happens. Picture this: You’re rolling down I‑70, heading to a customer site in Baltimore or Hagerstown. On arrival, you diagnose a hydraulic fault on a bucket truck, verify an electrical repair on a digger derrick, road-test a crane truck for safety, and wrap up the day documenting your work and updating the customer with confidence. If that sounds like your perfect day, you’ll feel right at home here. What You’ll Tackle • Diagnose, troubleshoot, and repair utility trucks and heavy equipment on customer sites across Baltimore, Hagerstown, and the broader Washington, DC service area., • Work across systems: mechanical, hydraulic, electrical, and pneumatic., • Perform scheduled inspections and preventative maintenance to keep fleets mission-ready., • Conduct road tests after repairs to confirm performance and safety., • Accurately document service actions and communicate status updates to customers and CTOS teams., • Manage your field schedule and service calls independently., • Safely operate, maintain, and inventory a company-provided service truck., • Collaborate with the CTOS Field Service team to deliver best-in-class support. Equipment You’ll See Specialized utility and construction equipment including bucket trucks, digger derricks, cranes, service trucks, and more. What You Bring • Hands-on experience as a Field Service Technician in heavy equipment, trucks, or utility equipment., • Must hold a Class B CDL., • Advanced diagnostic ability in mechanical, hydraulic, and electrical systems., • Proven success working independently in the field., • Strong documentation, organization, and time management skills., • Clear, professional communication and customer service skills., • Valid driver’s license with an acceptable driving record., • Willingness to travel throughout Baltimore, Hagerstown, and the Washington, DC territory, with occasional overnight trips. Why You’ll Love Working Here, • Remote, field-based role with home-base flexibility., • Fully outfitted service truck provided (crane, compressor, welder) plus phone and computer., • Hands-on work with specialized utility and heavy equipment., • Consistent workload supporting major customers and CTOS clients across the region., • Competitive pay and a comprehensive benefits package., • Overtime available., • Growth potential with a national leader operating from 40+ locations and employing 2,600+ team members. Core Proficiencies, • Heavy equipment repair, • Hydraulic systems expertise, • Diesel and heavy equipment systems, • Electrical systems and diagnostics (heavy equipment), • Aerial and utility equipment systems, • DOT and equipment inspection compliance, • Electrical schematic reading Tools, Machines & Technologies You’ll Work With, • Diesel engines, • Diesel vehicles (Ford), • Box trucks (Peterbilt, Kenworth, Freightliner), • Cranes (Konecranes), • Boom trucks (Terex, Altec, Elliott, National Crane, Load King), • Digger derricks (Elliott), • Boom cranes, • Refuse trucks, • Hi-Rail trucks, • Power Take-Off (PTO) About Custom Truck One Source For 30+ years, CTOS has delivered specialized trucks, equipment, parts, rentals, upfitting, aftermarket accessories, and service to the utility, telecommunications, rail, forestry, oil & gas, and construction markets—backed by innovative solutions and unmatched support. If you’re an independent problem-solver who takes pride in fieldwork and customer care, apply today and join the CTOS team. EOE

Job DescriptionStart Date: Immediate JHNA, CTSi, and EXPANSIA have come together to form a Defense Technology platform named Aether Aerospace focused on delivering high-impact technologies, technology-enabled services and advanced manufacturing solutions to the U.S. Department of Defense and related national security customers. Backed by Falfurrias Management Partners, the platform brings together deep domain expertise across Army, Navy, and Air Force and Space Force programs, digital engineering, systems integration, and specialized manufacturing capabilities. The combined organization operates as a multi-entity aerospace and defense technology and tech-enabled services and manufacturing enterprise positioned for scalable growth, operational excellence, and long-term value creation. OVERVIEW Full-time/Permanent Employee Location: Hollywood, MD and Day Shift: 6am-4pm Mon-Thur and 6am-3pm Friday We are seeking a full-time TIG Welder to join our team. The selected candidate must have the ability to obtain a government clearance and must have good knowledge and understanding of welding applications. RESPONSIBILITIES Perform different weld methods based on project requirements Read and interpret project plans, blueprints and other written instructions and diagrams to perform task at hand. Creating fixturing for production welding environments Possession of current AWS D17.1 certification (aluminum, carbon steel, or stainless steel) KEY QUALIFICATIONS Clearance: Ability to obtain Secret Clearance Education and Years of Experience: High School Diploma/GED and 1+ Year of experience as a commercial/ aerospace welder. Current and valid certification(s) a plus. AutoCAD for schematics and drawings OrCAD (preferred) or similar EDA tools (e.g., Altium) for PCB development Good knowledge & understanding of heat applications, heat absorbents during welding operations to prevent warpages of parts. General knowledge of shop practices including layout, drilling, sawing, grinding, etc. Ability to lift up to 75 lbs on a daily basis. Must wear approved PPE (personal protective equipment). Must be able to work overtime, weekends, and other shifts as required There are a host of factors that can influence final salary including, but not limited to, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, geographic location, education, and certifications. Aether Aerospace is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Job DescriptionStart Date: Immediate JHNA, CTSi, and EXPANSIA have come together to form a Defense Technology platform named Aether Aerospace focused on delivering high-impact technologies, technology-enabled services and advanced manufacturing solutions to the U.S. Department of Defense and related national security customers. Backed by Falfurrias Management Partners, the platform brings together deep domain expertise across Army, Navy, and Air Force and Space Force programs, digital engineering, systems integration, and specialized manufacturing capabilities. The combined organization operates as a multi-entity aerospace and defense technology and tech-enabled services and manufacturing enterprise positioned for scalable growth, operational excellence, and long-term value creation. OVERVIEW Full-time/Permanent Employee Location: Hollywood, MD Our client is seeking a full-time TIG Welder to join our team. The selected candidate must have the ability to obtain a government clearance and must have good knowledge and understanding of welding applications. The proposed salary range for this position is $20-$35/hr. There are a host of factors that can influence final salary including, but not limited to, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, geographic location, education, and certifications. RESPONSIBILITIES Perform TIG weld methods based on project requirements. Read and interpret project plans, blueprints and other written instructions and diagrams to perform task at hand. KEY QUALIFICATIONS Clearance: Ability to obtain Secret Clearance Education and Years of Experience: High School Diploma/GED and 3 Year of experience as a commercial/ aerospace welder. Current and valid certification(s) a plus. AutoCAD for schematics and drawings OrCAD (preferred) or similar EDA tools (e.g., Altium) for PCB development Good knowledge & understanding of heat applications, heat absorbents during welding operations to prevent warpages of parts. General knowledge of shop practices including layout, drilling, sawing, grinding, etc. Ability to lift up to 75 lbs on a daily basis. Must wear approved PPE (personal protective equipment). Must be able to work overtime, weekends, and other shifts as required Aether Aerospace is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Job DescriptionStart Date: Immediate JHNA, CTSi, and EXPANSIA have come together to form a Defense Technology platform named Aether Aerospace focused on delivering high-impact technologies, technology-enabled services and advanced manufacturing solutions to the U.S. Department of Defense and related national security customers. Backed by Falfurrias Management Partners, the platform brings together deep domain expertise across Army, Navy, and Air Force and Space Force programs, digital engineering, systems integration, and specialized manufacturing capabilities. The combined organization operates as a multi-entity aerospace and defense technology and tech-enabled services and manufacturing enterprise positioned for scalable growth, operational excellence, and long-term value creation. OVERVIEW Full-time/Permanent Employee Location: Hollywood, MD and Day Shift: 6am-4pm Mon-Thur and 6am-3pm Friday We are seeking a full-time TIG Welder to join our team. The selected candidate must have the ability to obtain a government clearance and must have good knowledge and understanding of welding applications. RESPONSIBILITIES Perform TIG weld methods based on project requirements. Read and interpret project plans, blueprints and other written instructions and diagrams to perform task at hand. Creating fixturing for production welding environments Possession of current AWS D17.1 certification (aluminum, carbon steel, or stainless steel) KEY QUALIFICATIONS Clearance: Ability to obtain Secret Clearance Education and Years of Experience: High School Diploma/GED and 1 Year of experience as a commercial/ aerospace welder. Current and valid certification(s) a plus. AutoCAD for schematics and drawings OrCAD (preferred) or similar EDA tools (e.g., Altium) for PCB development Good knowledge & understanding of heat applications, heat absorbents during welding operations to prevent warpages of parts. General knowledge of shop practices including layout, drilling, sawing, grinding, etc. Ability to lift up to 75 lbs on a daily basis. Must wear approved PPE (personal protective equipment). Must be able to work overtime, weekends, and other shifts as required There are a host of factors that can influence final salary including, but not limited to, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, geographic location, education, and certifications. Aether Aerospace is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Job Description R&R Fabrication is hiring experienced welders for steel stairs, railings, and miscellaneous metals. We need people with hands-on stair and rail welding experience who work independently and take pride in their work. Responsibilities: • Weld stairs, railings, and related steel components., • Follow shop drawings and welding instructions., • Clean and grind welds as needed., • Check weld quality and complete work to shop standards., • Keep work areas clean and follow shop safety procedures. Requirements: • Previous stair and rail welding experience required., • Follow drawings and work independently., • Produce clean, consistent welds., • Reliable attendance and transportation., • Live within reasonable commuting distance of Prince Frederick. Apply with your resume or a brief summary of your stair and rail welding experience. \nCompany Description We are looking for people who take ownership, move fast, and want to be part of building something that lasts. We are looking for people who take ownership, move fast, and want to be part of building something that lasts.

Job Description JENNMAR Services, a well-respected industrial construction/maintenance company, is currently seeking Experienced Millwrights, Welders and Fabricators for Travel Work. Quality and service are the core principles of our company and we prioritize excellent relationships with our clients. THESE POSITIONS ARE BOTH FULL TIME TRAVEL POSITIONS WITH COMPETITIVE PAY, BENEFITS AND PERDIEM AND LOCAL POSITIONS MUST BE ABLE TO TRAVEL EACH WEEK TO VARIOUS LOCATIONS Benefits for Experienced Millwrights, Welders, Fabricators: • Perdiem/hotel, • Health, Dental, Vision, • Paid Time Off, • 401(k) with matching after 6 months Job Responsibilities for Experienced Millwrights, Welders, Fabricators: • Follow instructions from supervisors and/or crew foremen while maintaining all safety standards, • Perform various physical duties assigned, • Move, secure, install, build, load and/or unload materials, tools and equipment, • Welding and fabrication for repairs and install of plant equipment, chutes and crushers, • Properly repair and install mechanical parts for equipment, • Read schematics and instruction manuals to make equipment repairs if needed, • Stick Weld and use Oxy/Act torches safely and efficiently, • Use hand tools and power tools safely and efficiently, • Clean/prepare job site, • Assist skilled tradespeople in their duties, • Properly, efficiently and safely apply types of oils and greases according to specification of equipment/job Job Requirements Experienced Millwrights, Welders, Fabricators: • Must be 18 or older, • Ability to routinely climb stairs, ladders and/or platforms, bend and squat, • Ability to walk, stand or sit for prolonged periods of time, • Ability to consistently lift and/or move up to 50 pounds throughout the shift, • Able to work any shifts, including overtime, weekends and holidays required., • Ability to pass background and drug & alcohol testing required., • MSHA Surface and Underground certifications a plus JENNMAR Services, our employees are our most important assets and is committed to them with competitive pay and a comprehensive benefits plan, including 401(k). We are consistently employing individuals in the Coal, Oil & Gas, Construction, Manufacturing and Industrial industries.

Job DescriptionStart Date: Immediate JHNA, CTSi, and EXPANSIA have come together to form a Defense Technology platform named Aether Aerospace focused on delivering high-impact technologies, technology-enabled services and advanced manufacturing solutions to the U.S. Department of Defense and related national security customers. Backed by Falfurrias Management Partners, the platform brings together deep domain expertise across Army, Navy, and Air Force and Space Force programs, digital engineering, systems integration, and specialized manufacturing capabilities. The combined organization operates as a multi-entity aerospace and defense technology and tech-enabled services and manufacturing enterprise positioned for scalable growth, operational excellence, and long-term value creation. OVERVIEW Full-time/Permanent Employee Location: Hollywood, MD and Nightshift: is 2pm-1am Mon-Thur (4-10s) We are seeking a full-time TIG Welder to join our team. The selected candidate must have the ability to obtain a government clearance and must have good knowledge and understanding of welding applications. RESPONSIBILITIES Perform different weld methods based on project requirements Read and interpret project plans, blueprints and other written instructions and diagrams to perform task at hand. Creating fixturing for production welding environments Possession of current AWS D17.1 certification (aluminum, carbon steel, or stainless steel) KEY QUALIFICATIONS Clearance: Ability to obtain Secret Clearance Education and Years of Experience: High School Diploma/GED and 1+ Year of experience as a commercial/ aerospace welder. Current and valid certification(s) a plus. AutoCAD for schematics and drawings OrCAD (preferred) or similar EDA tools (e.g., Altium) for PCB development Good knowledge & understanding of heat applications, heat absorbents during welding operations to prevent warpages of parts. General knowledge of shop practices including layout, drilling, sawing, grinding, etc. Ability to lift up to 75 lbs on a daily basis. Must wear approved PPE (personal protective equipment). Must be able to work overtime, weekends, and other shifts as required There are a host of factors that can influence final salary including, but not limited to, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, geographic location, education, and certifications. Aether Aerospace is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

FULL-TIME WELDER Maryland Metals, Inc. is currently seeking an experienced Full-Time Welder to join our team at our Hagerstown, Maryland facility. This is an immediate opening for a dependable and motivated individual looking for a long-term opportunity with an established company. Qualified candidates should have experience with both MIG and Stick welding. Applicants must also have the ability to read and understand print specifications, blueprints, and written instructions in order to complete custom jobs accurately and efficiently. Attention to detail, quality workmanship, reliability, and the ability to work as part of a team are important for this position. Maryland Metals, Inc. offers a competitive salary and comprehensive benefits package, including: 401(k) Medical insurance Vision insurance Dental insurance 10 paid holidays Sick pay Paid vacation If you have welding experience and are interested in joining our team, we encourage you to apply today. Apply in person at: Maryland Metals, Inc. 620 Mitchell Ave. Hagerstown, MD 21740 Or send your resume to: _ Maryland Metals, Inc. looks forward to hearing from qualified candidates interested in this full-time welding opportunity. recblid 3401p73vdaa3b52qpbzpku13jbznqc

Job DescriptionStart Date: Immediate JHNA, CTSi, and EXPANSIA have come together to form a Defense Technology platform named Aether Aerospace focused on delivering high-impact technologies, technology-enabled services and advanced manufacturing solutions to the U.S. Department of Defense and related national security customers. Backed by Falfurrias Management Partners, the platform brings together deep domain expertise across Army, Navy, and Air Force and Space Force programs, digital engineering, systems integration, and specialized manufacturing capabilities. The combined organization operates as a multi-entity aerospace and defense technology and tech-enabled services and manufacturing enterprise positioned for scalable growth, operational excellence, and long-term value creation. OVERVIEW Full-time/Permanent Employee Location: Hollywood, MD and Nightshift: is 2pm-1am Mon-Thur (4-10s) We are seeking a full-time TIG Welder to join our team. The selected candidate must have the ability to obtain a government clearance and must have good knowledge and understanding of welding applications. RESPONSIBILITIES Perform TIG weld methods based on project requirements. Read and interpret project plans, blueprints and other written instructions and diagrams to perform task at hand. Creating fixturing for production welding environments Possession of current AWS D17.1 certification (aluminum, carbon steel, or stainless steel) KEY QUALIFICATIONS Clearance: Ability to obtain Secret Clearance Education and Years of Experience: High School Diploma/GED and 1 Year of experience as a commercial/ aerospace welder. Current and valid certification(s) a plus. AutoCAD for schematics and drawings OrCAD (preferred) or similar EDA tools (e.g., Altium) for PCB development Good knowledge & understanding of heat applications, heat absorbents during welding operations to prevent warpages of parts. General knowledge of shop practices including layout, drilling, sawing, grinding, etc. Ability to lift up to 75 lbs on a daily basis. Must wear approved PPE (personal protective equipment). Must be able to work overtime, weekends, and other shifts as required There are a host of factors that can influence final salary including, but not limited to, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, geographic location, education, and certifications. Aether Aerospace is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Job DescriptionJob Title: Joist Shop Welder - 2nd ShiftJob Description Join our dynamic team in the joist shop where you will begin by mastering machinery operation before advancing to welding training. As a part of this team, you'll play a crucial role in assembling joists, ensuring production efficiency, and collaborating with colleagues. This position promises growth opportunities and requires dedication to achieving high-quality results. Responsibilities • Operate welding machines and other machinery., • Monitor machinery to ensure it functions correctly., • Work collaboratively in an assembly line to produce joists., • Read and interpret schematics to assemble joists accurately., • Participate in training sessions to improve skills and knowledge., • Handle material and conduct cleaning tasks as required., • Perform touch-up painting using standard techniques.Essential Skills, • Experience with MIG, TIG, or Stick welding is advantageous., • Familiarity with weld machine operation., • Proficiency in using hand tools and tape measures., • Ability to work in a heavy industrial environment.Additional Skills & Qualifications, • Prior experience in trades or relevant schooling., • Reliability and strong attendance record., • Adaptability to working in varying temperature conditions.Why Work Here? This position offers a $2000 sign-on bonus and tool allowances. Employees receive steel-toed boots and prescription eye covers. You will accrue up to 2-3 weeks of paid time off within the first two years, along with 7 sick days and 7 holidays. We value work-life balance and provide opportunities for growth and development. Work Environment Work in a manufacturing plant where structural steel is fabricated for bridge work, specifically in the joist shop. The environment can be hot in the summer and cold in the winter, and it is a heavy industrial atmosphere. Safety training is mandatory, and new hires must be comfortable with loud noises and metal work. The facility emphasizes collaboration and efficiency in production. Job Type & Location This is a Contract to Hire position based out of Point of Rocks, MD. Pay and Benefits The pay range for this position is $21.17 - $24.17/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Point of Rocks, MD. Application Deadline This position is anticipated to close on Nov 10, 2026. Workplace Type This is a fully onsite position in Point of Rocks,MD. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionStart Date: Immediate JHNA, CTSi, and EXPANSIA have come together to form a Defense Technology platform named Aether Aerospace focused on delivering high-impact technologies, technology-enabled services and advanced manufacturing solutions to the U.S. Department of Defense and related national security customers. Backed by Falfurrias Management Partners, the platform brings together deep domain expertise across Army, Navy, and Air Force and Space Force programs, digital engineering, systems integration, and specialized manufacturing capabilities. The combined organization operates as a multi-entity aerospace and defense technology and tech-enabled services and manufacturing enterprise positioned for scalable growth, operational excellence, and long-term value creation. OVERVIEW Full-time/Permanent Employee Location: Hollywood, MD and Nightshift: is 2pm-1am Mon-Thur (4-10s) We are seeking a full-time TIG Welder to join our team. The selected candidate must have the ability to obtain a government clearance and must have good knowledge and understanding of welding applications. RESPONSIBILITIES • Perform different weld methods based on project requirements, • Read and interpret project plans, blueprints and other written instructions and diagrams to perform task at hand., • Demonstrated proficiency in advanced fabrication methods - preferably within the aerospace industry, • Creating fixturing for production welding environments, • Possession of current AWS D17.1 certification (aluminum, carbon steel, or stainless steel)KEY QUALIFICATIONS Clearance: Ability to obtain Secret Clearance Education and Years of Experience: High School Diploma/GED and 4+ Year of experience as a commercial/ aerospace welder. Current and valid certification(s) a plus. AutoCAD for schematics and drawings OrCAD (preferred) or similar EDA tools (e.g., Altium) for PCB development Good knowledge & understanding of heat applications, heat absorbents during welding operations to prevent warpages of parts. General knowledge of shop practices including layout, drilling, sawing, grinding, etc. Ability to lift up to 75 lbs on a daily basis. Must wear approved PPE (personal protective equipment). Must be able to work overtime, weekends, and other shifts as required There are a host of factors that can influence final salary including, but not limited to, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, geographic location, education, and certifications. Aether Aerospace is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Job Description Position Summary We are seeking a motivated Assembler/Welder to join a growing manufacturing team specializing in the assembly and fabrication of commercial truck equipment. This position is responsible for assembling mechanical components, fitting fabricated parts, and performing quality MIG welds while ensuring all work meets production and safety standards. The ideal candidate is mechanically inclined, enjoys hands-on work, and takes pride in producing high-quality products. Essential Responsibilities • Assemble truck bodies, equipment, and mechanical components according to blueprints and work instructions., • Perform MIG welding on steel components to meet quality and production standards., • Read and interpret blueprints, diagrams, and production drawings., • Install brackets, hardware, panels, and other fabricated components., • Operate hand tools, power tools, grinders, drills, and measuring equipment safely and effectively., • Inspect completed assemblies and welds for accuracy and quality., • Maintain an organized and clean work area., • Follow all safety procedures, PPE requirements, and manufacturing standards., • Work closely with team members to meet daily production goals., • Assist with other manufacturing and assembly tasks as assigned. Qualifications • Previous manufacturing, assembly, fabrication, or welding experience preferred., • Experience with MIG welding required., • Ability to read blueprints and follow detailed work instructions., • Strong mechanical aptitude and attention to detail., • Experience using hand tools, power tools, and measuring devices., • Ability to work independently and as part of a team., • Dependable with a strong work ethic and positive attitude. Physical Requirements • Ability to stand, walk, bend, kneel, and reach throughout the workday., • Ability to lift up to 50 pounds as needed., • Comfortable working in a manufacturing environment with exposure to noise, dust, and varying temperatures., • Ability to safely wear required personal protective equipment (PPE).

Job Description ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. Lead Welder We are seeking an experienced and hands-on Lead Welder to oversee the end-to-end operations of our Tube Shop manufacturing cell. The ideal candidate will have extensive experience in tube cutting, bending, flaring, TIG welding, OTW welding, borescoping, and a strong awareness of FOD (Foreign Object Debris) control. This leadership role requires managing daily operations, driving safety and quality initiatives, and ensuring timely delivery of assemblies to our customers. WHAT YOU'LL GET TO DO: • Lead and manage the day-to-day operations within the Tube Shop manufacturing cell., • Conduct daily safety meetings to promote a safe working environment., • Set weekly goals and expectations for the team to achieve production and quality targets., • Assign work orders (WOs) to technicians and clearly communicate daily expectations., • Maintain clear and consistent communication regarding the status of assemblies and expected delivery dates to internal teams and customers., • Open and manage new work orders, ensuring all documentation is accurate and up to date., • Identify and communicate non-conformities to engineering teams and initiate Non-Conformance Reports (NCRs) as necessary., • Maintain all machines and tooling within the department, order and replace new tooling as needed., • Provide hands-on training across sub-cells to develop and maintain the skill sets required for end-to-end tube manufacturing., • Lead and champion 5S initiatives within the cell to maintain an organized, efficient, and clean work environment., • Ensure strict adherence to FOD awareness and control procedures., • Collaborate with cross-functional teams to continuously improve processes and quality standards. YOU'LL BRING THESE QUALIFICATIONS FOR LEAD WELDER: • 8+ years of hands-on experience in tube manufacturing processes including tube cutting, bending, flaring, TIG welding, OTW welding, and borescoping, • Strong knowledge of FOD awareness and control, • Experience with opening and managing NCRs and working closely with engineering teams., • Proficient in 5S methodology and continuous improvement practices THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Certification or formal training in welding or tube manufacturing processes., • Experience with aerospace or high-precision manufacturing environments., • Familiarity with manufacturing software and work order management systems., • Strong organizational skills with the ability to manage multiple work orders and priorities simultaneously., • Ability to work in a fast-paced manufacturing environment and lead by example, • Excellent communication skills, both verbal and written, with the ability to clearly convey status updates and expectations, • Previous experience leading a manufacturing team or cell, with the ability to manage daily operations and lead safety meetings ADDITIONAL REQUIREMENTS: • Stand and walk for entire shift (8+ hours) on various work surfaces, • Climb ladders and work at elevated height small spaces, awkward positions, and tight areas as needed, • Perform repetitive motions including bending, twisting, reaching, grasping, pushing, pulling, and stooping, • Use hands with precision to handle, control, and operate tools, instruments, and equipment, • Lift, carry, push, and pull materials and equipment up to 25 lbs., • Work in varied environments including production floors, equipment areas, and field locations with exposure to noise, temperature variations, and moving machinery, • Flexibility to work extended hours, weekends, and varied shifts as operational needs require Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: discounted employee stock purchase program, and free snacks/drinks onsite. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (MD Only) $37—$46 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionDescription: About Us: Structural Iron Erectors (SIE) is a leading fabricator and supplier of all types of steel used in many major construction projects such as large scale commercial and residential buildings. Our quality is visible throughout the Metropolitan area of Washington D.C., Virginia, and Maryland. At SIE, we are committed to fostering a safe and productive work environment. SIE is seeking a highly skilled Welder to join our team. The Welder is critical to the success of our construction projects. Job Summary: The Welder is responsible for welds and assembles metal pieces and products by using handheld welding equipment. The Welder sets up parts for welding; uses hand tools, clamps, jigs and fixtures. The Welder works from specifications, drawings, weld symbols and prepares and completes work on materials by welding, cutting, grinding and cleaning metal. Supervisory Responsibilities: None Duties/Responsibilities: • Perform MIG, and Stick welding on steel components (field work)., • Read and interpret blueprints, drawings, and specifications to determine layout and installation requirements., • Weld structural steel components using FCAW, SMAW, or GMAW processes., • Follow shop drawings, welding symbols, and AISC/AWS D1.1 welding codes., • Ensure welds meet project specifications and safety standards., • Inspect completed work to ensure compliance with plans, specifications, and quality standards., • Set up, operate, and maintain welding equipment and tools., • Conduct visual inspections and participate in quality assurance processes., • Install decking, stairs, handrails, and other fabricated components., • Maintain a clean, organized, and safe work area., • Performing other duties as assigned by the Foreman and/or Superintendent. Requirements: Qualifications: • High school diploma or equivalent., • Proven experience as a structural welder (2+ years preferred)., • AWS D1.1 welding certification preferred or ability to obtain., • Ability to read and interpret structural blueprints and welding symbols., • Familiarity with standard shop tools, measuring devices, and fabrication equipment., • Commitment to safety and quality. Travel Requirements: As required to the job site. (Field work) Physical Requirements: Be physically active for long periods without getting tired or out of breath. Bend, stretch, twist, or reach out. Keep or regain the body's balance or stay upright when in an unstable position. See objects in very bright or glaring light. Equal Opportunity Employer: SIE is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, disability, or any other status protected by law. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description J&J Truck Bodies & Trailers is looking for experienced welders for our Cumberland, MD shop who set up and operate equipment to weld together fabricated metal components of products such as truck bodies, trailers, specialty vehicles, and related subassemblies; and custom fabrications made of carbon steel and aluminum using the GMAW and FCAW process.Essential Duties and Responsibilities:Safely perform duties, always wearing the required PPEObserves and complies with all provisions of the ISO 9001 QMSConnects cables from welding unit to obtain amperage, voltage, slope, and pulse, as specified by training, or by foreman.Starts the power supply to produce an electric current.Cleans or degreases weld joints or workpieces.Prepares objects for welding by grinding surfaces.Positions and clamps work pieces together or assemble them in a jig or fixture. Fit up simple assembliesPreheat the workpiece if/when required.Strikes (forms) arc to melt and deposit metal from electrode to workpiece and join edges of the workpiece.Manually guides gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead.Examines weld for bead size and other specifications.Chips off excess weld, slag, and spatter.Set up and adjust welder, and perform routine maintenance such as replacing spools of wire & changing out liners.Safely operate all lifting devices such as overhead & jib cranes and fork trucks when authorized & adequately trained.Education and Experience:Vocational/technical training needed or a high school diploma or general education degree with work experience in an industrial setting.BenefitsExcellent health insurance plans available for employees and their families401-K retirement plan with a company match of up to 6%Affordable dental and vision insuranceCompany-paid life insuranceCompany paid short and long-term disability insuranceCompetitive paid time off program#LP

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Tank Builder / Welder (Nationwide) Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matterTo Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR 3U8e6ExFGt

Structural Welder - Per Diem Offered. Trillium Construction is seeking structural welders for a 5-day shutdown in Baltimore, MD.

Manufacturing Mechanic / Entry Level Welder. Our client – Atlantic Design – is seeking a Manufacturing Mechanic / Entry Level Welder.

If you're an experienced welder, fabricator, or skilled tradesperson with strong Stick Welder / Fabricator skills, we have an opportunity to put your experience to work installing and welding compactors, chutes, balers, and related equipment. Stick Welder / Fabricator | Clinton, MD.

Job Description We are seeking an experienced Shop Welder / Fabricator to work out of our Union Bridge, Maryland shop. This position will support field and shop operations through structural welding, fabrication, equipment repair, and the maintenance and hardfacing of drilling tools and augers. The ideal candidate is an experienced welder who takes pride in producing safe, high-quality work and is comfortable working with heavy steel, drilling components, structural members, and specialized construction equipment. A current or qualifying AWS D1.5 welding certification is required for this position. Responsibilities: Welding & Fabrication • Perform stick welding (SMAW) and wire-feed welding as required for shop fabrication and repair work., • Splice structural beams and other steel members in accordance with applicable welding procedures and project requirements., • Read and interpret drawings, measurements, layouts, and fabrication details., • Cut, fit, prepare, weld, and finish steel components., • Fabricate custom components and modifications for specialized construction and drilling equipment., • Inspect completed welds and fabricated components for quality and conformance with requirements., • Maintain proper weld preparation, fit-up, penetration, and overall workmanship. Hardfacing & Drill Tool Maintenance • Perform hardfacing of drill tools, augers, and related drilling components to extend service life and maintain performance., • Inspect returned drill tooling for wear, cracking, damage, and repair requirements., • Build up and restore worn steel surfaces as required., • Repair and modify augers, cutting tools, and other drilling components., • Assist with the replacement and repair of worn components as needed., • Maintain consistency and quality when applying hardfacing materials to high-wear areas. Sectional Casing Repair • Inspect sectional casing returned from field operations., • Repair damaged or worn casing through welding, cutting, fitting, straightening, and fabrication as appropriate., • Identify components that should be repaired, returned to service, or removed from service., • Ensure repaired casing is ready and properly identified for future field use. Steel Identification & Inventory • Receive and inspect steel, tooling, casing, and fabricated components returning to the Union Bridge shop from jobsites., • Identify, mark, label, and organize returned steel so material can be readily located and reused., • Maintain an accurate working inventory of steel and other designated materials., • Separate usable material from items requiring repair or disposal., • Help maintain organized steel storage and fabrication areas., • Coordinate with shop and field personnel regarding available materials and repair status. EOE/Minorities/Females/Veterans/Disability (Compliant with the new VEVRAA and Section 503 rules Preferred Experience Experience in one or more of the following areas is strongly preferred: • Hardfacing and wear-resistant welding, • Auger and drill tool repair, • Foundation drilling equipment, • Sectional casing repair, • Structural steel fabrication, • Beam splicing, • Heavy construction equipment fabrication and repair, • Welding on equipment used in bridge, foundation, or heavy civil construction Job Requirements: • AWS D1.1 Certification, • 2-3 years’ experience · Strong welding and fabrication skills · Attention to weld quality and detail · Knowledge of hardfacing techniques · Mechanical aptitude · Ability to troubleshoot damaged or worn steel components · Good organizational and material-tracking skills · Dependability and strong attendance · Ability to prioritize multiple shop repair and fabrication needs · Commitment to safe work practices · Ability to work effectively as part of a shop and field support team This is a hands-on shop position that requires the ability to work safely around heavy steel, welding equipment, machinery, and construction equipment. The employee must be able to perform the physical duties associated with welding and fabrication, including standing for extended periods, bending, kneeling, positioning welding equipment, handling steel components, and working in various welding positions. The employee is expected to maintain a clean and organized work area and follow all company, OSHA, welding, and shop safety requirements. Compensation is based

Job Description Thompson First Group is seeking Welders for contract-to-hire positions with a local client. Candidates with previous production welding experience, welding certifications, or formal welding training are encouraged to apply. This is an excellent opportunity to join a global manufacturer that produces products used in electrical connection and protection systems for industrial and commercial applications. Responsibilities: • Review blueprints and collaborate with lead personnel to determine job requirements., • Gather materials and perform layouts according to specifications., • Set up welding equipment and adjust machine settings as needed., • Perform MIG welding on steel, aluminum, and other materials., • Inspect completed welds to ensure quality standards are met., • Repair defective welds and remove excess slag, flux, and spatter using grinders, brushes, buffers, and pads., • Operate cutting torches and manual plasma cutting equipment when required., • Prepare completed work for inspection and communicate with quality personnel., • Maintain a clean and organized work area by performing routine housekeeping duties., • Follow all company safety procedures and manufacturing standards. Qualifications: • GED or equivalent education preferred., • Minimum of one year of welding experience or formal welding training., • Production welding experience or current welding certification preferred., • Ability to obtain welding certification if not currently certified., • Must successfully complete a welding test during the interview process., • Ability to read blueprints and accurately use a tape measure., • Experience operating welding equipment and related fabrication tools., • Ability to obtain forklift certification., • Willingness to follow standard operating procedures and work instructions Thompson First Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic in accordance with applicable federal, state, and local laws.

Job Description Overview Are you a skilled metalworker looking for a hands-on role in fabrication and machining? As a Shop Fitter/Fabricator, you’ll use your expertise in welding and metal fabrication to assemble components with precision, following blueprints, work orders, and instructions. This position requires proficiency in various gas metal welding techniques, as well as a strong understanding of different materials, including steel, aluminum, stainless steel, and galvanized metals. You’ll work with welding processes such as GMAW, GTAW, SAW, and SMAW, ensuring high-quality craftsmanship in every project. A keen eye for detail, the ability to read and interpret blueprints, and knowledge of welding symbols and dimensioning are essential for success in this role. With tiered levels based on certifications and project complexity, this is a great opportunity to refine your skills, take on new challenges, and grow within the fabrication and machining industry! There are two levels of Fitter Fabricators: • Fitter Fabricator I – Holds a variety of welding certifications and can fit and fabricate basic to moderately complex jobs., • Fitter Fabricator II – Able to fit and fabricate complex jobs and perform in a leadership capacity with an assigned welder. This individual will have a thorough understanding of all aspects of industrial fabrication and must be proficient with the products and services offered by the company and must be flexible and willing to work extended hours as needed. Responsibilities • Safely and efficiently operate assigned equipment, • Read and understand drawings and blueprints, and accurately execute work orders and quality assurance (QA) standards per job requirements, • Identify, lay-out, position, and secure parts and assemblies according to specifications and/or prints using various measuring devices such as straightedge, combination square, gages, tape measures, etc. to ensure fabrications/assemblies conform to quality standards and specified design, • Tack-weld or weld components and assemblies, using welding equipment, • Perform structural welding using a variety of procedures, such as the groove weld, fillet weld complete joint penetration, and partial joint penetration, • Welds components in flat, vertical, or overhead positions Working Conditions • Sit, talk, hear, read, and write, • Walk; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms, • Stand for extended periods of time, • Lift and/or move up to 50 pounds, • Perform duties indoors in a shop setting with occasional work outdoors in a variety of weather conditions Qualifications • 2+ years of welding and fabrication experience in an Industrial Metal Shop preferred, • Must successfully complete a weld test required before employment, • Ability to pass certifications in both GMAW and GTAW welding required within 30 days, • Advanced ability in reading and interpreting blueprints to include dimensioning, welding symbols, etc., • Proficient in the use of manual plasma cutter and oxyfuel cutting torch, • Possess advanced knowledge of metal plate types (steel, aluminum, stainless, galvanized, etc.) sizes, and shapes (beams, channels, angles, pipe, flat bar, etc.), • Experience with the use of an overhead crane, • Valid driver’s license is required Additional Eligibility Qualifications This position requires the completion of a thorough background and pre-employment drug and alcohol screening. In accordance with The Company’s Drug and Alcohol policy, employees are required to participate in random, post-accident and reasonable suspicion drug and alcohol testing as requested. AAP/EEO Statement This Company is an Equal Employment Opportunity Employer that provides opportunities without regard to any protected classes under applicable law. ADA Statement Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.