Trabajos welding en Pittsburgh, PennsylvaniaCrear alertas

Description: Installs and troubleshoots industrial equipment, systems, and components, including but not limited to: large capacity washers and dryers, pneumatic and steam systems, conveyor systems, and boilers. Performs maintenance tasks in accordance with all Company safety policies and approved maintenance procedures. 1. Equipment and Facility Maintenance • Uses common tools including but not limited to: hand and power tools such as hammers, hoists, saws, drills, and wrenches, precision measuring instruments, and electrical and electronic testing devices., • Ensures safe operation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components; following blueprints and schematics, operations manuals, manufacturer's instructions, and engineering specifications. 1. Safety • Maintains a safe and clean working environment by complying with procedures and regulations., • Performs Lockout/Tagout procedures where appropriate., • Performs Confined Space procedures where appropriate. 1. General Duties • Position requires travel to multiple Company locations in order to perform job, • Provides maintenance information to appropriate partners., • Performs various welding activities including MIG, TIG, ARC, cutting, and brazing, • Installation of machinery, mechanical, electrical, pneumatic, and hydraulic systems equipment and components following blueprints and schematics, operations manuals, manufacturer’s instructions, and engineering specifications. Performs all other duties as assigned by manager Qualifications: • Must be 18 years of age or older., • Equipment Maintenance Knowledge – Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment. Applicable technical training and/or military experience will be considered., • High school diploma or GED required., • Valid driver’s license and safe driving record is required., • Ability to read blueprints and schematics preferred, • Ability to read and understand maintenance literature printed in English required., • Experience using Hand & Power tools required., • Lockout/Tagout experience is preferred., • Prior welding experience including MIG, TIG, ARC, cutting, and brazing, • Disclaimer Statement: This job description is not intended, nor should it be construed to be an exhaustive list of all responsibilities, duties, skills, or working conditions associated with a job. It is intended to be only a general description of the principal requirements common to positions of this type. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Description: Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. What’s in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you’ll be doing: • Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs., • Inspect, operate, and test machinery and equipment to diagnose machine malfunctions., • Performing basic welding activities to effect repairs on facilities and equipment., • Troubleshoot and repair Programmable Logic Controllers (PLC’s) and associated control systems., • Perform and assign all preventive maintenance on facility and production assets., • Follow blueprints, schematics, operations manuals, manufacturer’s instructions, and engineering specifications using a documented schedule., • Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required., • Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours., • Assume responsibility for all shifts in the maintenance department., • Oversee and implement all maintenance related regulatory and environmental compliance requirements., • Assume responsibility for all aspects of safety within the maintenance department., • Perform Confined Space and Lockout / Tagout procedures where appropriate., • Monitor training status of technicians and provide time for required training as needed., • Utilize a Computerized Maintenance Management System., • Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor., • Train and develop maintenance partners., • Perform other duties as assigned by leadership. Qualifications: What we’re looking for: • High school and/or GED is preferred., • Two-year technical degree in an appropriate background is preferred., • Must be at least 21 years of age., • Valid driver’s license and a safe driving record are required., • Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment., • Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required., • Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered., • Minimum of 2 years of experience supervising maintenance personnel is preferred., • Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required., • Ability to read blueprints and schematics is required., • Ability to read and understand maintenance literature printed in English required., • Proficiency in Microsoft Office skills is required., • Experience in Hand & Power tools is required., • Lockout / Tagout experience is required, • Ability to work overtime as needed is required., • Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Job Summary Warehouse Maintenance Technicians are responsible for repairing all of the equipment within the building and preforming all building maintenance functions. They make sure everything is operating in a safe and efficient manner. In this role, you will maintain, schedule maintenance, and assist in repairing warehouse equipment. Job Description • Always maintain safety as a top priority., • Repair and perform preventative maintenance on machinery and mechanical equipment including forklifts, pallet jacks, and cranes., • Visually inspect and test machinery and powered equipment using electrical, electronic testing equipment and hand tools., • Listen and observe operation of machines and equipment to detect malfunctions and diagnose problems., • Install, program and repair automated machinery and equipment., • Design machine parts, jigs, fixtures and tools and improves existing efficiencies., • Maintain and repair building and grounds using hand and power tools, hoists and cranes., • Clean and lubricate shafts, bearings, gears and other machine parts using pressure washer, brushes, grease gun and gear lubricant dispenser., • Repair and replace gauges, valves, pressure regulators and related equipment., • Operate cutting torch and welding equipment to cut or join metal parts., • Assemble, install and maintain pipe system and related hydraulic and pneumatic equipment., • Maintain a safe, clean work area., • Remodeling and new construction of existing facilities., • Ability to read and understand blueprints, wire schematics and technical manuals., • Maintain detailed summary sheets of tasks performed regarding preventative maintenance, diagnoses of problems and repairs performed on equipment., • Perform other miscellaneous duties as needed and assigned. About Us At Giant Eagle, we believe in nourishing life’s moments, big and small, because they matter. We strive to lead the way in quality, service, and everyday value. Most importantly, the compassion, care, and respect our Team Members show to each other and in our communities is what truly sets us apart. Here, you’ll find a place to win, grow, and be better together. If you want to make a real impact, belong to a supportive community, and build a meaningful career, we invite you to grow your future with us — because you matter.

Job Description Mechanic is responsible for repairs and maintenance of vehicles - such as heavy equipment, heavy duty diesel trucks and other miscellaneous vehicles. Need a lot of experience with CAT both trucks and excavators Job Responsibilities • Troubleshoot and repair vehicles, heavy equipment, equipment accessories, • Mechanic to perform minor repairs and general routine maintenance such as oil, filter and fluid changes, • Mechanic to repair brakes, suspension, exhaust, engine diagnostics, welding, wiring repair, and troubleshooting, • Troubleshoot and repair vehicles, heavy equipment, equipment accessories, • Perform road calls if necessary, • Maintain a clean and safe work area, • Repairs made in a timely manner Skills and Qualifications Required • Performs state inspections, and registrations on vehicles and equipment, • Must have hand and air tools (needs to be a large amount with variety), • Inspection license, • Mechanic to be self-motivated and willing to work, • Knowledge and experience - looking for mechanics that like to fix things and not just a parts changer, • Valid - good driver's license, • Pass a background check, • 40+ overtime, evenings and weekend as needed, • Salary is discussed on experience, possible paid travel time Summary As a Heavy Equipment/Diesel Mechanic, you will be a vital team member responsible for maintaining and repairing heavy equipment and diesel vehicles. Utilizing core skills such as automotive diagnostics, mechanical knowledge, and vehicle maintenance, you will diagnose issues, perform repairs, and ensure equipment functionality. Your premium skills in dealership experience, fabrication, and familiarity with Caterpillar equipment will be valuable in handling specialized tasks. With relevant skills in customer service, heavy lifting, and automotive repair, you will provide quality service and support to clients. Join our team and showcase your expertise in a challenging and rewarding work environment.

Job Description Join Our Team as a Diesel Mechanic at PLP Company! Job Title: Diesel Mechanic Company Name: PLP Company Salary: $70,000 - $100,000+ Based on Experience plus Referral bonuses and yearly bonus incentives Industry: Construction - Government or Federal Location: Bethel Park, PA Job Overview: (PLP Co.) is looking for a reliable and experienced Mechanic to join our dynamic team. Renowned for delivering high-quality pavement marking solutions, PLP Co. offers an opportunity to work in a supportive, growth-oriented environment. In this role, you'll ensure the smooth operation of our fleet and equipment, utilizing your mechanical skills to perform maintenance, diagnostics, and repairs on-site or in our facilities. Who We Are: PLP Co. is a trusted leader in pavement marking services for government and federal projects. With a commitment to safety, quality, and timeliness, we take pride in fostering a collaborative and innovative workplace. Join a team that values training, career advancement, and professional development. Responsibilities Include but Are Not Limited To: • Diagnostics and Repairs: Perform diagnostics, repairs, and routine maintenance on various equipment, from light-duty to heavy-duty trucks and construction equipment., • Preventative Maintenance: Conduct scheduled maintenance per OEM guidelines using electrical, hydraulic, and pneumatic schematics., • Emergency Assistance: Provide roadside repair support when necessary, coordinating towing as needed., • Tool and Equipment Care: Maintain tools and equipment to ensure reliability., • Safety Compliance: Follow all safety guidelines and perform DOT inspections., • Fabrication Tasks: Weld, fabricate, and cut parts as required using arc-welding and flame cutting equipment. Qualifications: • 1+ years of proven experience in mechanic, especially with diesel engines, gas engines, and hydraulic systems., • Ability to diagnose and repair diverse mechanical issues., • Welding and fabrication skills are preferred but not required., • Valid driver's license; CDL preferred but not mandatory., • Physical ability to lift 50+ pounds and work in various weather conditions., • High school diploma or GED. Key Competencies: • Reliable, punctual, and self-disciplined., • Strong problem-solving and attention to detail., • Excellent teamwork and communication skills., • Willingness to adapt to changing business needs. Benefits and Perks: Compensation Perks: • Weekly pay with overtime., • Referral bonuses and yearly bonus incentives., • Double-time pay for Sunday work., • Simple IRA with 3% employer match. Health and Wellness: • Healthcare (medical and vision insurance) covered after 90 days., • Company-provided PPE and uniforms, with weekly laundry services., • Safety equipment and work apparel provided to ensure comfort and compliance. Work-Life Balance: • Paid time off for holidays, vacation, and sick days., • Lodging and per diem covered for overnight travel., • Relocation assistance for travel-related projects. Career Development: • CDL training provided., • Opportunities for technical and safety training, including certifications in OSHA and manufacturer-specific programs. Unique Perks: • Use of company vehicles for job-related travel., • Enjoy company events, such as holiday parties, fostering team camaraderie and connection. Work Schedule: • Full-time, Monday through Friday. Occasional weekends and travel may be required., • 10+ hour workdays and 40+ hour workweeks. Work Location: This role supports projects in federal and government sectors, with occasional travel required. Equal Opportunity Statement: PLP Co. fosters a diverse and inclusive work environment, welcoming employees from all backgrounds. We are an equal-opportunity employer and value the unique contributions of each team member.

Job Description Are you a mechanic looking for a better job? Bring us your pay stubs snd we'll give you a raise. Call 412-655-PUSH Push-N-Pull’s inspection mechanics and shop technicians provide their services in all aspects of the shop. Team members must have the ability to successfully install, troubleshoot, and repair truck equipment. Additionally, a good candidate will also be able to retain knowledge and accurately educate others. Minimum requirements the candidate will have: 3 - 5 Years relevant experience including trailers, trucks, general truck equipment, and general mechanics Experience in industry relevant electrical knowledge Highschool Education or G.E.D. equivalent Safe, professional, and career minded attitude Must be able to pass a criminal background check and drug test Individual troubleshooting ability Current state driver’s license and reliable transportation Current PA state inspection license Ability to work with minimal supervision and well with others A toolbox with a basic set of hand tools, electric drive tools, etc. Hydraulic and pneumatic systems Experience in installation and service on PTO systems, Parker, Chelsea, or equiv. Experience in installation and service of Clutch Pump systems, Deweze, C.W. Mill, or equiv. Ability to correctly design, build, route, and fabricate hosing for hydraulic appliances. Substantial time spent installing and or servicing 12 volt systems Additional Qualifications Preferred: Welding experience Installation of: snowplows, salt spreaders, and dump bodies Responsibility and duties: Perform state inspection for trailers GVWR 3,001 lbs – 26,000 lbs Ability to “think outside the box”, constantly exceed expectations, and own every action Accurately record time and parts for each job order Continuing education on product lines and industry innovations Hours: M-F - No work on weekends or Holidays Benefits: Paid time off, paid holidays, health, vision, and dental insurance available. One of the biggest providers of snow plows, salt spreaders, dump bodies, trailer and hitches in Pittsburgh, PA All candidates to be considered will need to have reliable transportation. We are a top performing company and are looking for great long term, motivated candidates who will play a vital role in their continued growth and success. 5951 Brownsville Rd Pittsburgh PA 15236 Job Type: Full-time \nCompany Description Push N Pull is one of the largest providers of snow plows, salt spreaders, dump bodies, trailer and hitches in Pittsburgh, PA Push N Pull is one of the largest providers of snow plows, salt spreaders, dump bodies, trailer and hitches in Pittsburgh, PA

Job Description Join Our Team as a Diesel Mechanic at PLP Company! Job Title: Diesel Mechanic Company Name: PLP Company Salary: $70,000 - $100,000+ Based on Experience plus Referral bonuses and yearly bonus incentives Industry: Construction - Government or Federal Location: Bethel Park, PA Job Overview: (PLP Co.) is looking for a reliable and experienced Mechanic to join our dynamic team. Renowned for delivering high-quality pavement marking solutions, PLP Co. offers an opportunity to work in a supportive, growth-oriented environment. In this role, you'll ensure the smooth operation of our fleet and equipment, utilizing your mechanical skills to perform maintenance, diagnostics, and repairs on-site or in our facilities. Who We Are: PLP Co. is a trusted leader in pavement marking services for government and federal projects. With a commitment to safety, quality, and timeliness, we take pride in fostering a collaborative and innovative workplace. Join a team that values training, career advancement, and professional development. Responsibilities Include but Are Not Limited To: • Diagnostics and Repairs: Perform diagnostics, repairs, and routine maintenance on various equipment, from light-duty to heavy-duty trucks and construction equipment., • Preventative Maintenance: Conduct scheduled maintenance per OEM guidelines using electrical, hydraulic, and pneumatic schematics., • Emergency Assistance: Provide roadside repair support when necessary, coordinating towing as needed., • Tool and Equipment Care: Maintain tools and equipment to ensure reliability., • Safety Compliance: Follow all safety guidelines and perform DOT inspections., • Fabrication Tasks: Weld, fabricate, and cut parts as required using arc-welding and flame cutting equipment. Qualifications: • 1+ years of proven experience in mechanic, especially with diesel engines, gas engines, and hydraulic systems., • Ability to diagnose and repair diverse mechanical issues., • Welding and fabrication skills are preferred but not required., • Valid driver's license; CDL preferred but not mandatory., • Physical ability to lift 50+ pounds and work in various weather conditions., • High school diploma or GED. Key Competencies: • Reliable, punctual, and self-disciplined., • Strong problem-solving and attention to detail., • Excellent teamwork and communication skills., • Willingness to adapt to changing business needs. Benefits and Perks: Compensation Perks: • Weekly pay with overtime., • Referral bonuses and yearly bonus incentives., • Double-time pay for Sunday work., • Simple IRA with 3% employer match. Health and Wellness: • Healthcare (medical and vision insurance) covered after 90 days., • Company-provided PPE and uniforms, with weekly laundry services., • Safety equipment and work apparel provided to ensure comfort and compliance. Work-Life Balance: • Paid time off for holidays, vacation, and sick days., • Lodging and per diem covered for overnight travel., • Relocation assistance for travel-related projects. Career Development: • CDL training provided., • Opportunities for technical and safety training, including certifications in OSHA and manufacturer-specific programs. Unique Perks: • Use of company vehicles for job-related travel., • Enjoy company events, such as holiday parties, fostering team camaraderie and connection. Work Schedule: • Full-time, Monday through Friday. Occasional weekends and travel may be required., • 10+ hour workdays and 40+ hour workweeks. Work Location: This role supports projects in federal and government sectors, with occasional travel required. Equal Opportunity Statement: PLP Co. fosters a diverse and inclusive work environment, welcoming employees from all backgrounds. We are an equal-opportunity employer and value the unique contributions of each team member.

Job Description Mobile Diesel Mechanic / Heavy Equipment Field Technician Company: Parking Lot Painting Company (PLP Co.) Location: Bethel Park, PA (Serving Regional Field & Roadside Operations) Job Type: Full-Time Schedule: Flexible Scheduling (Days, Nights, Weekends; 10-Hour+ Shifts / 40-Hour+ Work Weeks) Pay Range: $35.00 – $55.00+ per hour (Based on Experience) The Opportunity Keep the Fleet Moving. Master Command of the Road. Parking Lot Painting Company (PLP Co.) is a premier, high-growth specialty contractor recognized for elite-level installation and removal of complex pavement markings. Our reputation is built on velocity and uncompromising quality. To maintain this standard, we need a high-caliber Mobile Diesel Mechanic / Heavy Equipment Field Technician to serve as our primary field diagnostic authority. This is an autonomous, high-impact field role for a disciplined mechanic who thrives away from a standard shop bay. You will be handed the keys to the highway, managing real-time diagnostics, heavy structural repairs, and emergency roadside recovery across a diverse asset footprint. If you are a self-driven troubleshooter who commands mechanical respect across both "yellow iron" and heavy transport trucks, PLP Co. provides the stable, year-round platform and uncapped overtime you need to elevate your career. What You Will Be Doing You will take complete ownership of field asset readiness, working independently across diverse environments to minimize operational downtime: • On-Site Technical Diagnostics: Rapidly troubleshoot, isolate, and repair complex mechanical failures on-site. Your scope spans light-duty support vehicles, class 8 heavy-duty transport trucks, and heavy specialty construction machinery., • Systems & Diagrams Mastery: Execute preventative maintenance and intricate system overhauls by accurately interpreting OEM blueprints, electrical schematics, hydraulic circuits, and pneumatic diagrams., • Emergency Roadside Recovery: Provide rapid-response tactical assistance for field breakdowns, executing structural repairs under tight time constraints or coordinating complex towing logistics when necessary., • Component Fabrication & Welding: Dismantle devices using advanced hand and power tools to replace defective components. Occasionally perform custom structural cutting, wire-feed/arc welding, and torch-cutting to adapt parts in the field., • Quality Assurance Testing: Rigorously inspect and test all field-repaired equipment to guarantee 100% operational safety and peak performance before it returns to active service., • Regulatory Compliance: Conduct official DOT inspections and maintain strict alignment with federal safety guidelines to protect our drivers and the traveling public. What You Need to Succeed (Qualifications) • Technical Expertise: Proven professional experience as a fleet, diesel, or heavy equipment mechanic, ideally with a background in mobile or field-service environments., • Engine & Hydraulic Fluency: Documented hands-on experience working directly with diesel engines, gasoline engines, and high-pressure hydraulic systems., • Physical Stamina & Dexterity: Exceptional eye-hand-foot coordination, fine manual dexterity, and the physical capability to lift or transport 50+ pounds continuously in varying outdoor weather conditions., • Licensure & Record: A valid Driver’s License paired with an excellent driving record (no major violations within the last 5 years) to meet company insurance policy criteria., • Education: High School Diploma or GED equivalent. Preferred Technical Competencies (Not Required): • Active Commercial Driver’s License (CDL) — PLP Co. will provide on-the-job CDL training for the right candidate., • Structural welding and metal fabrication experience. Key Core Competencies • Punctuality & Discipline: Absolute commitment to arriving at designated start times; self-motivated to work diligently under strict field time restraints., • Public Professionalism: Polite, respectful demeanor when interacting with clients, general contractors, and the traveling public., • Emergency Demeanor: Ability to think quickly, prioritize tasks logically, and act appropriately in high-stress roadside or field emergency situations. Compensation & Premium Benefits We reward precision, punctuality, and field leadership with a comprehensive total rewards package: • Top-Tier Earnings: Highly competitive pay of $35.00 – $55.00+ per hour with significant overtime opportunities (10+ hour days) paid on a reliable weekly cycle., • Professional Development: Paid, on-the-job Commercial Driver’s License (CDL) Training and ongoing technical certifications., • Asset Support: Access to a tool replacement program, advanced tech package, and all necessary specialized safety equipment/uniforms., • Health & Security: Comprehensive medical, dental, and vision insurance options, alongside retirement savings plans to protect your long-term goals., • Operational Variety: A dynamic, supportive work environment with an ever-changing variety of technical challenges that ensures no two days are the same. About PLP Company Parking Lot Painting Company (PLP Co.) is an established market leader in pavement marking infrastructure. We pride ourselves on a culture rooted in safety, accountability, mutual respect, and elite execution. We invest heavily in our iron and our people, providing our technicians with the modern diagnostic tools and corporate stability required to build a lifelong career. Parking Lot Painting Company is an Equal Opportunity Employer. We are committed to a diverse, safe, and inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, or any other protected status. Personnel may be requested to perform additional or related duties as business needs evolve.

Job Summary Warehouse Maintenance Technicians are responsible for repairing all of the equipment within the building and preforming all building maintenance functions. They make sure everything is operating in a safe and efficient manner. In this role, you will maintain, schedule maintenance, and assist in repairing warehouse equipment. Job Description • Always maintain safety as a top priority., • Repair and perform preventative maintenance on machinery and mechanical equipment including forklifts, pallet jacks, and cranes., • Visually inspect and test machinery and powered equipment using electrical, electronic testing equipment and hand tools., • Listen and observe operation of machines and equipment to detect malfunctions and diagnose problems., • Install, program and repair automated machinery and equipment., • Design machine parts, jigs, fixtures and tools and improves existing efficiencies., • Maintain and repair building and grounds using hand and power tools, hoists and cranes., • Clean and lubricate shafts, bearings, gears and other machine parts using pressure washer, brushes, grease gun and gear lubricant dispenser., • Repair and replace gauges, valves, pressure regulators and related equipment., • Operate cutting torch and welding equipment to cut or join metal parts., • Assemble, install and maintain pipe system and related hydraulic and pneumatic equipment., • Maintain a safe, clean work area., • Remodeling and new construction of existing facilities., • Ability to read and understand blueprints, wire schematics and technical manuals., • Maintain detailed summary sheets of tasks performed regarding preventative maintenance, diagnoses of problems and repairs performed on equipment., • Perform other miscellaneous duties as needed and assigned. About Us At Giant Eagle, we believe in nourishing life’s moments, big and small, because they matter. We strive to lead the way in quality, service, and everyday value. Most importantly, the compassion, care, and respect our Team Members show to each other and in our communities is what truly sets us apart. Here, you’ll find a place to win, grow, and be better together. If you want to make a real impact, belong to a supportive community, and build a meaningful career, we invite you to grow your future with us — because you matter.

Job Description Intermediate Capital Cost Estimator (Mechanical) Greentree, PA, United States Responsibilities • Develop accurate cost estimates for mechanical equipment, piping, HVAC, and structural components for industrial manufacturing and Food & Beverage projects., • Prepare detailed material take-offs (MTOs) from P&IDs and 3D models related to process piping, hygienic piping (304/316L SS), and utility piping (chilled water, compressed air, steam)., • Apply HACCP principles to mechanical estimating, ensuring correct pricing for sanitary design elements including orbital welding, inspection, dead leg elimination, surface finish requirements, and CIP/SIP systems., • Solicit and evaluate vendor quotes for specialized Food & Beverage equipment such as homogenizers, pasteurizers, sanitary pumps, and advanced material handling systems., • Adjust estimates for brownfield environments, factoring in dust control, temporary hygienic hoarding, and system tie-ins., • Apply industry-standard labor norms to mechanical installations, adjusting for site-specific conditions and sanitary welding rates., • Assist in preparing AACE Class 3 and Class 2 detailed estimates with clear basis of estimate documentation. Requirements, • 4–7 years of estimating experience in mechanical and piping disciplines within industrial, manufacturing, or Food & Beverage sectors., • Degree or diploma in Mechanical Engineering, Construction Management, or a related technical field., • Strong knowledge of hygienic design standards, HACCP construction requirements, and sanitary piping systems., • Familiarity with AACE Recommended Practices; working towards AACE certification is an asset., • Experience with consulting cost and schedule risk assessments is a plus. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M-1 #LI-EB1 Ref: #282-Eng Pgh

Job Description Job Title: QA/QC Manager Location: Pittsburgh, PA Type: Direct Hire Compensation: $85,000.00 - $125,000.00 Work Model: Onsite – onsite Responsibilities • Manage the implementation of the company's ASME/Industrial QA/QC program at the Pittsburgh location., • Monitor weld procedures and ASME code requirements to verify compliance with company, customer, and code specifications., • Inspect welded sub-assemblies and assemblies at designated points during manufacturing for ASME hold points., • Maintain compliance with ASME weld procedures and train shop foremen and QC staff in measurements, documentation, and shop traveler generation., • Maintain all quality records for the company, including visual and mechanical inspection of products per drawings and code requirements., • Conduct onsite and offsite factory acceptance tests (FAT) according to customer QC documents., • Participate in tri-annual review of ASME stamp certifications., • Collaborate with drafting/design to review and correct fabrication drawings before release., • Prepare and maintain ASME QC records, respond to corrective actions, and handle non-conformances., • Work closely with manufacturing, engineering, vendors, and staff to review quality issues and insulate production from problems., • Communicate with customers and vendors, manage NDE services, and assist estimating with project evaluations., • Control QC manuals, procedures, and weld qualifications; certify welders; manage equipment calibration and inspection of received materials., • Perform weld and material tracking, witness testing activities, and verify inspections per code standards., • Create inspection sheets, check fit and layout, and develop final documentation packages. Requirements • Bachelor of Science in Manufacturing Engineering or technical degree from a four-year college or university, or significant manufacturing/welding/metal fabrication experience., • CWI certification encouraged., • Minimum of 3+ years in quality systems, audits, and procedures; 5+ years in fabrication and manufacturing industries., • In-depth knowledge of ASME and AWS codes., • Proficient in ASME inspection processes, including incoming inspection, material certification, in-process inspection, and code sections for hydrostatic testing., • Ability to read and interpret blueprints, weld symbols, and use measurement instruments., • Strong documentation skills, including generating ASME reports, shop travelers, and maintaining quality records., • Excellent communication skills, self-starter attitude, and ability to lead and collaborate across teams., • Proficient in Excel, Word, and PowerPoint., • Physical ability to work at shop and construction sites, climb ladders, lift up to 40 pounds, and work in various weather conditions. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 #LI- Ref: #282-Eng Pgh

JLL empowers you to shape a brighter way. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. What this job involves: As a Specialist, Engineering Services, you'll play a critical role in ensuring the seamless operation of our healthcare facility by leading and directing our maintenance team. You'll oversee the installation, repair, and maintenance of all base building and critical system machinery and equipment, ensuring minimal disruption to operations while maintaining the highest standards of safety and regulatory compliance. This position is essential to JLL's commitment to delivering exceptional facility management services that support our clients' mission-critical operations. What your day-to-day will look like: • Supervise and direct maintenance staff, monitoring performance and ensuring efficient completion of service requests with minimal disruption, • Implement and oversee the preventative maintenance program, scheduling tasks strategically and delegating to qualified team members, • Diagnose malfunctioning equipment, determine corrective actions, and facilitate root cause analysis to restore optimal operating conditions, • Provide hands-on training to maintenance staff on proper tool usage, safety procedures, troubleshooting techniques, and professional standards, • Oversee contracted maintenance work, ensuring timely performance, warranty fulfillment, and proper documentation, • Maintain inventory of tools, supplies, and equipment parts; prepare purchase order requests and identify reliable vendors, • Ensure compliance with departmental policies for hazardous material storage, usage, and disposal while maintaining a clean and safe workplace, • Recommend facilities repairs and improvements for annual budget inclusion and implement at least one annual cost-saving initiative related to energy or utility consumption Required Qualifications: • High school diploma plus two years of trade/vocational schooling or apprenticeship in electrical, piping/plumbing, refrigeration, or HVAC, • 5+ years of experience in healthcare facility/plant engineering maintenance, • Thorough understanding of Joint Commission and other regulatory survey requirements, • Multi-skilled expertise in a minimum of two craft areas (HVAC, fluid handling/pumping, mechanical systems, welding, electrical systems), • Valid US Driver's License, • Ability to climb ladders up to 40 feet and lift 60 lbs repeatedly, • Ability to detect emergency alarms (auditory and/or visual) Preferred Qualifications: • Proficiency in basic computer applications such as MS Office and email, • Familiarity with Computerized Maintenance Management Systems (CMMS), preferably Corrigo, • Understanding of Building Automation Systems (BMS), • Strong interpersonal and customer service skills with excellent oral and written communication abilities, • For internal candidates: consistently receives "meets expectations" on IPMP performance reviews, • Physical capability to perform visual machinery and building inspections, frequently walk up and down stairs, get on hands and knees to access difficult areas Location: Brentwood, PA Salary: $27 to $31 per hour Schedule: 7:00am to 4:30pm Monday to Friday At JLL, we are collectively shaping a brighter way — for our clients, ourselves and our fellow employees. We choose to take the more inspiring, innovative, and optimistic path on our journey toward success. What sets JLL apart is our culture of collaboration, locally and across the globe, which allows us to create transformative solutions for the real estate industry. We support each other's wellbeing and champion inclusivity and belonging across teams. JLL is an Equal Opportunity Employer committed to diversity and inclusion. This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without sponsorship. Location: On-site –Brentwood, PA If this job description resonates with you, we encourage you to apply, even if you don’t meet all the requirements. We’re interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits include: • 401(k) plan with matching company contributions, • Comprehensive Medical, Dental & Vision Care, • Paid parental leave at 100% of salary, • Paid Time Off and Company Holidays, • Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL’s recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our _. For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy _. Jones Lang LaSalle (“JLL”) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process – including the online application and/or overall selection process – you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our page > I want to work for JLL. Accepting applications on an ongoing basis until candidate identified.

Job Description Job Overview: D7 Pneumatics LLC is seeking highly skilled and experienced Millwright with strong welding capabilities to join our maintenance division team for our scheduled fall shutdowns This role will involve maintaining, repairing, and installing industrial machinery across steel mills. The ideal candidate will have a solid background in mechanical systems, a strong understanding of welding techniques, and the ability to work in a fast-paced, safety-focused environment. Key Responsibilities: • Maintenance & Repairs: Troubleshoot, repair, and maintain mechanical equipment, conveyor systems, crushers, pumps, motors, gearboxes, and other industrial machinery in coal mining operations, sawmills, and auto plants., • Welding & Fabrication: Perform welding (MIG, TIG, Stick) for repairs and fabrication of parts, structures, and equipment as needed. Conduct welding inspections to ensure high-quality, safe work., • Preventative Maintenance: Develop and implement preventative maintenance schedules to reduce downtime and extend the lifespan of machinery and equipment., • Installation & Commissioning: Assist with the installation, alignment, and commissioning of new equipment in mining, sawmill, and automotive production lines., • Safety & Compliance: Follow all safety protocols and work in compliance with regulatory requirements, ensuring that work areas are always safe and clean., • Collaboration: Work closely with other maintenance technicians, engineers, and management to ensure efficient operations and quick resolution of mechanical issues., • Problem Solving: Apply strong troubleshooting skills to identify mechanical failures and implement effective solutions. Required Qualifications: • Completion of a Millwright apprenticeship or equivalent experience., • Previous experience in industrial maintenance, preferably in steel mills, sawmill, and power plants., • Strong welding experience, particularly in MIG, TIG, and Stick welding, with the ability to work with a variety of materials (steel, stainless steel, etc.)., • Deep understanding of mechanical systems, hydraulics, pneumatics, and basic electrical systems., • Valid driver’s license, Millwright Certification, or equivalent trade qualification required., • Ability to work in physically demanding environments, including confined spaces, high elevations, and extreme temperatures. Must be capable of lifting heavy parts and materials as needed., • Strong troubleshooting abilities with attention to detail and precision., • Must adhere to all safety protocols and always demonstrate a commitment to a safe working environment. Preferred Qualifications: • Experience working in steel mills., • Ability to read and interpret blueprints, technical manuals, and electrical schematics., • Experience in the installation and commissioning of heavy machinery.

Job Description Job Duties and Responsibilities: • Operate manual machinery to produce parts., • Read and interpret blueprints and design sketches to ensure proper dimensions and specifications for parts., • Create prints and drawings., • Select the appropriate tooling and material based on the project., • Examines and measures completed units and parts to identify any defects and to ensure units conform with predetermined specifications; adjusts machine controls to resolve production errors., • Inspect machinery for any needed repairs; performs minor repairs within expertise., • Maintain cleanliness and safety of work area., • Compliance with applicable safety standards and regulations., • Perform other related duties, as assigned. Knowledge, Skills and Abilities: • Ability to operate various types of machinery., • Ability to read blueprints and plans., • Ability to use micrometers, calipers, and height gauges., • Ability to program in G code and conversational., • Excellent mechanical skills. Education and Experience Requirements: 5+ years of experience in machining. 3G and 4G welding certification a plus. Physical Requirements: • Must be able to lift and carry up to 75 pounds., • Prolonged periods of standing and walking., • Able to bend, stretch, push, pull, and move, as needed.

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder. Work Region: Braddock, PA Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR AKyVhG1EX2

Job Description JENNMAR Services, a well-respected industrial construction/maintenance company, is currently seeking Experienced Millwrights, Welders and Fabricators for Travel Work. Quality and service are the core principles of our company and we prioritize excellent relationships with our clients. THESE POSITIONS ARE BOTH FULL TIME TRAVEL POSITIONS WITH COMPETITIVE PAY, BENEFITS AND PERDIEM AND LOCAL POSITIONS MUST BE ABLE TO TRAVEL EACH WEEK TO VARIOUS LOCATIONS Benefits for Experienced Millwrights, Welders, Fabricators: • Perdiem/hotel, • Health, Dental, Vision, • Paid Time Off, • 401(k) with matching after 6 months Job Responsibilities for Experienced Millwrights, Welders, Fabricators: • Follow instructions from supervisors and/or crew foremen while maintaining all safety standards, • Perform various physical duties assigned, • Move, secure, install, build, load and/or unload materials, tools and equipment, • Welding and fabrication for repairs and install of plant equipment, chutes and crushers, • Properly repair and install mechanical parts for equipment, • Read schematics and instruction manuals to make equipment repairs if needed, • Stick Weld and use Oxy/Act torches safely and efficiently, • Use hand tools and power tools safely and efficiently, • Clean/prepare job site, • Assist skilled tradespeople in their duties, • Properly, efficiently and safely apply types of oils and greases according to specification of equipment/job Job Requirements Experienced Millwrights, Welders, Fabricators: • Must be 18 or older, • Ability to routinely climb stairs, ladders and/or platforms, bend and squat, • Ability to walk, stand or sit for prolonged periods of time, • Ability to consistently lift and/or move up to 50 pounds throughout the shift, • Able to work any shifts, including overtime, weekends and holidays required., • Ability to pass background and drug & alcohol testing required., • MSHA Surface and Underground certifications a plus JENNMAR Services, our employees are our most important assets and is committed to them with competitive pay and a comprehensive benefits plan, including 401(k). We are consistently employing individuals in the Coal, Oil & Gas, Construction, Manufacturing and Industrial industries.

Job Description Universal is looking for responsible, energetic new team members to support our manufacturing and maintenance processes. JOIN OUR TEAM TODAY Universal Stainless & Alloy Products, Inc., established in 1994, is headquartered in Bridgeville, PA, with plants in North Jackson, OH, Dunkirk, NY, and Titusville, PA. Universal Stainless produces semi-finished and finished specialty steel long products and plate including stainless steel, tool steel, bearing steel, gear steel, and aircraft quality low alloy steels for use in a variety of industries. Universal is committed to providing the best quality, delivery, and service possible. The Millwright is responsible for maintaining, repairing, installing, dismantling, and adjusting mechanical and hydraulic equipment throughout assigned areas and the facility. The Millwright supports the safe and reliable operation of mill and manufacturing equipment through preventative maintenance, troubleshooting, repair, and equipment installation. Basic Responsibilities: • Maintain, troubleshoot, and repair mechanical and hydraulic equipment throughout assigned areas and the facility., • Perform miscellaneous mechanical repair work, including pump installation, boiler repairs, pipe fitting, and related maintenance activities., • Inspect, repair, and maintain rolling mill equipment, furnace mechanical equipment, mechanical shears, annealing equipment, and other mill equipment., • Assemble, dismantle, adjust, and repair mechanical and hydraulic equipment., • Maintain and repair conveyors, mill stands, mill housings, and related mechanical equipment., • Assist with the installation of new equipment and relocation of existing equipment., • Perform welding, cutting, and burning as needed., • Troubleshoot equipment failures and assist with identifying solutions to prevent recurring issues., • Interpret mechanical blueprints, schematics, and technical sketches., • Operate overhead cranes and/or forklifts to safely move supplies, equipment, and materials as trained and authorized., • Use pressure and flow gauges and other equipment to assist with troubleshooting and repairs., • Maintain tools, equipment, and work areas in a safe, clean, and organized condition., • Follow established safety procedures, work instructions, and maintenance practices., • Work cooperatively with maintenance, engineering, manufacturing, and other plant personnel., • Perform other duties as assigned. Safety-Sensitive Position THIS IS A SAFETY-SENSITIVE POSITION. PROPER USE OF ALL REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) IS MANDATORY. Employees must follow all company safety procedures and PPE requirements for their assigned work area. Employees must be willing and able to comply with all required PPE, safety procedures, and work practices. Work Environment: • Work is performed in a heavy manufacturing environment around industrial machinery, rolling mill equipment, hydraulic systems, steel products, and materials., • Employees may work in different manufacturing and maintenance areas based on operational needs., • Employees may work around moving equipment, heavy materials, elevated temperatures, noise, hydraulic systems, and other industrial processes., • Ability to safely work around mechanical and hydraulic equipment is required., • Employees may be required to work at heights and in difficult-to-access areas as necessary., • Employees must be able to work extended shifts, varying schedules, and overtime as assigned. Skills: • Strong mechanical ability., • Strong analytical and troubleshooting skills., • Basic welding skills., • Ability to read and interpret mechanical schematics, blueprints, and technical drawings., • Working knowledge of mechanical and hydraulic systems., • Ability to troubleshoot, repair, assemble, and adjust industrial machinery., • Ability to safely use hand tools, power tools, and maintenance equipment., • Ability to work independently with minimal direction., • Ability to understand and follow written and verbal instructions., • Strong work ethic and reliable attendance., • Strong commitment to safety and proper PPE use. Schedule: • Full-time hourly position., • 6:00am-4:00pm Monday-Saturday, • Start times may be flexible based on department and operational needs., • Overtime is required as needed., • Work schedules may reach up to 72 hours per week based on operational requirements., • Flexibility to work in different areas and departments is required. Experience: • Previous mechanical experience in a steel-related, industrial, or manufacturing environment required., • Experience maintaining and repairing industrial mechanical and hydraulic equipment preferred., • Experience with rolling mill equipment, furnaces, mechanical shears, annealing equipment, conveyors, mill stands, or mill housings preferred., • Experience with pumps, pipe fitting, boilers, and hydraulic equipment preferred., • Welding, cutting, and burning experience preferred., • Journeyman Millwright experience or certification preferred. Education/Training: • Journeyman papers preferred., • Must be trained in all applicable areas of mechanical testing and repairs., • Must successfully pass the Ramsey Mechanical Aptitude Test RRI 10., • Must successfully pass the Ramsey Mechanical Test RR16-A., • Must successfully pass the applicable Rosedale Technical College test stand., • Must be able to demonstrate mechanical knowledge through a review/walk-through of mechanical schematics., • Additional on-the-job training will be provided as required. Supervision: • Generally works independently and requires minimal direction., • Position reports to the Maintenance Supervisor. Tools & Equipment: • Drill presses, • Diagnostic Equipment, • Power saws., • Portable drills and grinders., • Bench tools., • Cutting torches., • Welding and burning equipment., • Overhead pendant cranes., • Chain blocks come along., • Air hoists., • Pipe wrenches., • Crowbars and sledges., • Eye bolts, hammers, cold chisels, and punches., • Pressure and flow gauges., • Grab hooks., • Hydraulic fitting and die press equipment., • Miscellaneous hand and maintenance tools Physical Requirements: • Must be able to stand, walk, bend, reach, climb, and work in a manufacturing environment for extended periods., • Must be able to safely work around mechanical, hydraulic, and industrial equipment., • Must be able to use hand and power tools required to perform Millwright duties., • Must be able to work at heights and in difficult-to-access areas as required., • Must be able to safely handle tools, equipment, and industrial materials., • Must be able to wear required PPE for assigned work areas., • Must be able to work extended shifts and overtime as required. Training & Growth: Universal provides on-the-job training and opportunities to develop technical skills across multiple manufacturing and maintenance areas. Employees will have the opportunity to expand their mechanical and hydraulic troubleshooting skills, learn various mill equipment and processes, and develop expertise in industrial maintenance and equipment repair. We are looking for individuals who are reliable, mechanically skilled, safety-focused, detail-oriented, have a strong work ethic, and are interested in developing their career as a Millwright in a steel manufacturing environment. Pay & Benefits: • Benefits start on the first day of employment (Medical, Dental, Vision, Prescription Drug, HSA, FSA), • Company paid life insurance equal to annual salary, • Company paid short and long-term disability insurance, • Profit sharing, • USW Pension, • 401K, • Paid holidays, • Paid vacation Universal Stainless is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. • Full-time hourly position., • 6:00am-4:00pm Monday-Saturday, • Start times may be flexible based on department and operational needs., • Overtime is required as needed., • Work schedules may reach up to 72 hours per week based on operational requirements., • Flexibility to work in different areas and departments is required.

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder. Work Region: Braddock, PA Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR 2En82BEwWC

Job Description Diehl Collision is expanding and growing! Come join our team! We need an Experienced Hourly Body Shop Technician for Collision Repair work. GREAT EARNINGS AND BENEFITS! This is an excellent opportunity for a hard working, quality minded Body Shop Technician who is looking to make good money and be respected at work. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Responsibilities: • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Requirements: • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Piping Fabrication Production ManagerLocation: Pittsburgh, PAIndustry: Mechanical & Plumbing Construction About Us: Highland Consulting Group is a national executive search firm specializing in recruiting top-tier construction talent. With over 75 years of industry experience, we pride ourselves on placing the right professionals in the right roles for our clients, ensuring long-term success for both candidates and employers. Position Overview: We are partnering with a premier Piping Contractor in the Pittsburgh, PA area to identify a seasoned Piping Fabrication Production Manager. Supervisor to lead laser cutting, forming, and welding operations in a fast-paced fabrication job shop. This role oversees day-to-day production, people leadership, quality, and safety to deliver accurate work on short lead times while balancing multiple priorities. This position requires sheet metal fabrication and job shop experience. The environment is deadline-driven and requires flexibility to manage multiple projects while re-prioritizing quickly and efficiently. The Production Supervisor manages production personnel and workflow to ensure safe, efficient, and accurate output that meets quality standards and schedule commitments. Key Responsibilities • Direct material flow to the appropriate machine/department and drive work through completion., • Supervise operators and equipment across laser cutting, punching, waterjet cutting, press brake/forming, and welding., • Identify, evaluate, and improve production processes to increase safety, quality, and throughput., • Enforce quality standards; audit finished products before release., • Model and enforce company policies, work standards, and ethical expectations., • Coach, train, and develop production team members; provide performance feedback and documentation., • Escalate personnel matters to management as needed and partner on corrective actions., • Request needed tooling, equipment, and repairs; help prioritize maintenance to minimize downtime., • Promote a safety-first culture and ensure compliance with site safety procedures., • Maintain a clean, organized, and safe work area., • Facilitate effective communication between management and production teams., • Coordinate onboarding and cross-training to ensure coverage, skill growth, and consistent workmanship., • Monitor production activity on the floor to ensure adherence to work instructions, quality requirements, and safety practices., • Inspect equipment for safety and functionality; support preventive maintenance efforts., • Plan and prioritize work to meet short lead times, balancing quality, cost, and throughput., • Lead and motivate the team to achieve output goals while maintaining high quality standards., • Track and report production performance, labor utilization, and key shop metrics., • Maintain accurate documentation of employee training and performance as required., • Maintain records for equipment, supplies, and budget items; provide visibility to management for review. Qualifications: • Minimum 5 years of experience managing large pipe production projects, • Strong leadership and team management skills with a proven track record of success, • Deep understanding of project controls, budgeting, and scheduling, • Excellent communication and multitasking abilities, • Demonstrated career stability and consistent project delivery Benefits: Our client is deeply committed to the well-being of their employees and their families. This commitment is reflected in an attractive compensation package, which includes: • Competitive salary and generous bonuses, • 401(k) contributions, • Profit sharing Bonuses, • Comprehensive healthcare, • Paid Time Off Contact Us: If you meet the qualifications and are interested in this exciting opportunity, please apply for the position. For further information, feel free to contact me directly. David O'Connor Highland Consulting Group 724-837-6336 DTO1720

Job DescriptionDescription: Provide field oversight professional services for USACE District on the following work areas, which includes the installation of floodwall/levee, retaining walls, pump station, and culvert to convey Bound Brook beneath the NJ Transit rail line. Also, construction of the Segment C2 component of the project along Bound Brook includes two (2) pump stations, earthen levee, floodwall and one (1) road closure gate. The Segment H component of the project along Bound Brook includes earthen levee which ties into a railroad embankment, floodwall and one (1) road closure gate interior drainage features (swales, ponding areas, drainage, pipes), generator building, road raising and utility relocation, development of permit applications and incidental related work. Requirements: Essential Functions : Outside work environment consists of observing work activities such as construction installation, material storage, equipment usage, documenting progress with photos, documenting actions in QA daily report, documenting deficiencies, and compliance to codes and standards. Inside work environment consists of reviewing and commenting on contractor deliverables such as QC daily reports, schedule reports, meeting minutes, technical documents, request for information, submittal review, etc. in both hard copy or RMS computer database system. Competencies : Computer skills proficient with Microsoft Office suite of products Word, Excel, Adobe Acrobat, Scheduling software like Primavera P6, and Construction Database software like Procore, RMS, Newforma. Supervisory Responsibility : No supervisory responsibilities, works independently in the field. Reports to USACE Project Manager assigned at site and Crawford Project Manager assigned at Home Office. Work Environment : On a daily basis, the work environment requires a hard hat, eye glass protection, safety vest, gloves, and steel toed work boots for safety at all times. Long sleeve shirts worn around welding and electrical arc operations, otherwise clean short sleeve collared shirts and jeans are appropriate during field construction activities. Physical Demands: While performing professional oversight services, you will encounter uneven terrain, hills, water puddles, ruts, pitfalls, sumps, etc. during the daily walk inspections so watch for slips, trips, and falls. Prepare for heat and sun, by staying hydrated with water and wearing sunscreen lotion. No lifting over 25 lbs. Position Type/Expected Hours of Work: Works Monday – Friday, 6am to 3pm typically, minimum 8 hours per day. No overtime or weekend work is planned by the Client at this time. Travel: Yes, personal vehicle travel while onsite will be required and reimbursed at the Federal mileage rate, provided odometer backup log is acceptable. Required Education and Experience : Bachelor of Science Degree in Civil Engineer with 10+ years of experience with site/civil, geotechnical soils, structural abutments both steel and concrete reinforced. Master Degree in Civil Engineer, Geotechnical, Construction Management preferred alternative. Additional Eligibility Qualifications: US Driver’s License Required, OSHA 40/30 Required, and US Passport Preferred. Must have valid personal vehicle insurance and registration every day to gain security access onsite. Work Authorization/Security Clearance: Yes, a Federal Background Security Clearance is required by USACE to obtain a Govt Common Access Card Badge and Govt usage of Secured Network. In addition, Crawford requires a Federal, State, and Local Background as part of its employment along with drug and alcohol testing. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. All employees with disabilities are encouraged to contact the Human Resources Coordinator to review and discuss the essential and nonessential functions of the job. An employee with a disability can evaluate the position in greater detail to determine if she/he may perform the essential functions of the job with or without reasonable accommodation. Job descriptions are not intended, nor should they be construed to be, an exhaustive list of all responsibilities, tasks, efforts, working conditions, or similar behaviors, attributes or requirements associated with a job. The purpose of this document is to acquaint a person who is unfamiliar with the position with a brief overview of the position’s general direction and scope. This position profile is confidential, is intended for internal use only and may not be copied or reproduced by anyone for any purpose without written permission from the Human Resources Coordinator. Crawford does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor.

Job Description Are you an experienced NDT Level II Technician with pipeline expertise? Do you have skills in PAUT, Laser Scanner, AUT, or PMI? If so, we want you on our team! Tulsa Inspection Resources is the premier inspection provider with a passion for offering continuous training and education opportunities to our technicians. Apply today and grow with us! PRINCIPAL DUTIES & RESPONSIBILITIES • Perform NDE (UT, MT) inspections as required by customer in accordance with customer / TIRNDE written procedures., • Set up and calibrate nondestructive testing equipment., • Document all inspections on the appropriate NDE reports and review prior to submitting to TIR QA., • Compare results with available ILI data and report findings., • Organize and report test results, • Maintain close working relationship with construction crews and field personnel., • Perform pipe to soil readings, soil resistivity, MIC test, coating inspections as required by customer., • Provide training oversight for level I technicians., • Maintain continual communication with client representative (chief inspector, site inspector, integrity engineers), • Ensure all activities are performed in a safe and professional manner. Adhere to and enforce TIR safety policies., • Perform other job duties and related tasks as assigned by management. KNOWLEDGE, SKILLS & ABILITIES • High School Diploma or equivalent required., • Level II Certification in UT and MT with Laser Scanner experience., • Experience in PAUT, Laser Scanner, AUT, or PMI., • Minimum of 2 years Pipeline Integrity experience, 5 years of experience recommended., • Ability to provide personal 4x4 vehicle., • Working knowledge of pipeline welding and nondestructive testing procedures and specifications, including API 1104., • Working knowledge of station, facility and plant nondestructive testing procedures and specifications as applicable under ASME Section IX Welding codes., • Decision making skills., • Ability to work under pressure and multi-task on competing and deadline sensitive priorities., • Strong oral and written communication skills., • Ability to work confidently with multiple computer software programs. (Excel, Office), • Ability to recognize and report safety hazards. BENEFITS • Competitive Salary, • Medical, dental, vision, • Company Paid Long Term Disability, • Company Paid Life Insurance, • 401K Plan and Company Match, • Paid Holidays, • Paid Time Off, • Referral Bonus Program, • Internal Training and Cross Training for all NDE functions WORKING CONDITIONS Internal – Work is normally performed in a climate-controlled office environment (45%). External – Work is normally performed in a field environment with exposure to various weather conditions (55%). PHYSICAL DEMANDS Work involves standing, walking, and bending. Work normally requires reaching in all directions, seeing, and hearing with or without correction, applying basic mathematical skills, writing, and moderate computer keyboard skills. Work may require extended hours to ensure project and reporting deadlines are met. Does not require manual work. COMPANY OVERVIEW Tulsa Inspection Resources has proudly served the industry for over 20 years as the premier inspection and integrity management service provider. We are committed to building strong relationships with our customers, field technicians, support staff, partners, and suppliers. Our focus goes beyond delivering exceptional services — we are dedicated to training and upskilling our team to ensure they remain industry leaders. By combining expertise with continuous development, we help our customers safely sustain economic production, manage asset integrity, reduce total cost of ownership, and protect the environment. EQUAL OPPORTUNITY EMPLOYER TIR is an equal opportunity employer committed to diversity and inclusion. All qualified applicants will receive consideration for employment without regard to race, color, sex, pregnancy, sexual orientation, age, religion, creed, national origin, gender identity, disability, military/veteran status, genetic information or any other categories protected by applicable law. PAY RANGE $45-65/hr, depending on experience

Job Description Diehl Collision is expanding and growing! Come join our team! We need an Experienced FLAT RATE Body Shop Technician for Collision Repair work. GREAT EARNINGS AND BENEFITS! This is an excellent opportunity for a hard working, quality minded Body Shop Technician who is looking to make good money and be respected at work. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Responsibilities: • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Requirements: • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Diehl Collision is expanding and growing! Come join our team! We need an Experienced FLAT RATE Body Shop Technician for Collision Repair work. GREAT EARNINGS AND BENEFITS! This is an excellent opportunity for a hard working, quality minded Body Shop Technician who is looking to make good money and be respected at work. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Responsibilities: • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Requirements: • A Level Technician, • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Welding, • Structural repair, • Some mechanical repair knowledge We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description 4 day work week! Choose your day off! Sign on Bonus: $3,000.00 based on experience. P&W Foreign Cars Inc. BMW & Mini of Pittsburgh Dealer P&W Foreign Cars has been a family-owned and operated dealership group, serving the Pittsburgh community for over 50 years. We are a tight-knit organization that enjoys an outstanding culture and opportunities for advancement. We are interested in helping our employees' career progression because we know that happy employees lead to happier customers. P&W Foreign Cars is seeking an Auto Body Technician, to join our growing team! Auto Body Technician Salary: $26.00-30.00 per hour (Flat Rate) Benefits: Your benefits start the day you do! • Health insurance, • Retirement plan (401K Match), • Dental insurance, • Paid time off (6 paid Holidays per year), • Paid training, • Toolbox Relocation, • Flexible work schedule, • Manufactures training, paid for by BMW and Mini of Pittsburgh Responsibilities: • Repair collision-damaged vehicles according to manufacturer specifications and company standards, • Detail Oriented, • Ability to follow OEM repair procedures, • I-CAR certifications in structural or welding, ASE Certifications are a bonus and will be reflected in your offer letter., • Knowledge of the frame machine (Chief Bench, Celette Bench, NAJA Machine), • Ability to read estimates, • Valid driver’s license Qualifications: • Dexterity, requiring a steady hand, excellent hand-eye coordination, • Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment, • Ability to learn new technology, repair and service procedures and specifications, • Valid driver's license and clean driving record P&W Foreign Car Services does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor.

Job Description FerroWorks, has locations in Pittsburgh, McKees Rocks, and Kutztown, PA including McConway and Torley and Standard Forged, which have been in continuous operations since 1869, the same year the first US transcontinental railroad was completed. We have been able to meet the needs of our customers with a steady, dependable and economical supply of high-quality railroad industry products. As McConway is the original designers of the first standard automatic coupler, continued innovation and craftsmanship have and has led to a product line that includes every AAR approved coupler as well as custom coupler solutions, which are all proudly cast in the US. We are actively seeking a Metallurgist with deep knowledge in Steel Castings and Forgings to support our continued growth at McConway and Torley in Lawrenceville! In this position, you will provide your expertise in the areas of metallurgy and be a key member of our engineering and melt teams. Some of your key responsibilities will include: • Defining metallurgical requirements and ensure compliance with AAR and key customer requirements, • Analyzing mechanical, chemical, and metallurgical test data, • Providing technical leadership for welding metallurgy, • Leading root cause investigations and drive corrective actions for quality and production issues, • Supporting customer technical reviews, audits, and code interpretation discussions, • Coaching and Developing junior technical staff The position can have a primary location in Lawrenceville, or Mckees Rocks, but will support both facilities Required Qualifications: • At least 5 years of professional metallurgy experience, with at least some focus in steel castings Preferred Qualifications: • NDT, ASNT or CWI Experience or Certifications are a plus, • Proven Problem Solving skills, • Excellent customer facing communication skills Education: • Bachelor’s Degree in Metallurgical Engineering, Materials Science, or related field is required, • Equivalent Combination of education and experience may be considered Work Environment: • Work in office setting and with the plant, • Ability to tolerate both high and low temperatures, loud noises typical of a manufacturing plant Safety Activities: • Be aware of and observe all safety practices., • Know and follow all safety rules and procedures., • Participate in safety committees and initiatives as assigned. Benefits: Health & Pharmacy Dental & Vision Paid time off 10 paid holidays Flexible Spending Accounts Company Paid Life & AD&D Insurance Voluntary Life & AD&D Insurance 401(k) W/Company Match Short-Term Disability Voluntary Long-Term Disability Employee Assistance Program EEO/AA EMPLOYER/M/F/DISABLED/VETS

Job Description Our Family-Owned Business is looking for an Auto Body Technician to join our auto body repair team. In this position, you repair collision and other damage done to the bodies of vehicles. You will need your own tools for this job. Pay will be based on experience level. Auto Body Technician Duties and Responsibilities • Repair body to factory specifications, • Remove and replace damaged parts., • Fill cracks and depressions, • Perform cosmetic repairs. Auto Body Technician Requirements and Qualifications • Have your Own tools., • Welding, auto repair, and painting experience, • Valid PA Driver's license, • Previous Autobody Experience Mazur's Collision & Service Center is a Family-owned Business in Ross Township, PA. We are located at 3333 Babcock Blvd, Pittsburgh, PA 15237. Mazur's has been in business for 47 years in the North Hills of Pittsburgh. Mazur's Collision is a full-service Mechanic & Collision Center that does Inspections, Emissions, Diagnostics and Repair to all types of vehicles; including but not limited to Brakes, Exhaust, Tires & Oil Changes. It is also a full-service Collision shop with all the necessary equipment to fix your damaged vehicle. #hc206153

Job Description Job Description The Maintenance Technician Mechanicaljob is a core component for our maintenance force and requires a trained and experienced individual to contribute to our success as one of the world’s largest steel producers. The Maintenance Technician Mechanical performs mechanical maintenance functions necessary to maintain operating and service equipment using standard and specialized tools and mobile equipment, such as pendant and overhead cranes and forklifts as required. As a Maintenance Technician Mechanical, you will install, maintain, repair, and operate a broad range of mechanical systems and equipment in a heavy industrial environment to maintain continuous operations. Responsibilities: • Install, maintain, troubleshoot, and repair a broad range of mechanical systems and equipment including hydraulic, pneumatic, lubrication, power transmission systems, conveyors, cranes, and mobile equipment., • Provide assistance in operating functions as necessary., • May be required to work at heights and/or in confined space., • May work alone with minimal supervision or with other maintenance technicians., • Work in various areas of the plant location is required. Dependent upon the area, environmental conditions can be hot, cold, dirty, greasy, wet, and noisy. Requirements: • Minimum of 1 year manufacturing and/or industrial experience (including relevant experience gained in military service) or equivalent education. This includes experience in any of the following: hydraulic, pneumatic, lubrication, power transmission systems, welding, pipefitting, structural repair, and diesel mechanic., • High School Diploma or GED, • The position requires you to work 8 hour rotating shifts, which will include Saturdays and Sundays, and holidays., • The position requires overtime work as needed., • Adherence to safety procedures/guidelines always. Safety is our core value which requires you to wear safety protection such as hard hats, safety glasses, hearing protection, protective clothing, and boots with metatarsal protection., • The position requires punctuality, consistent attendance, and self-direction for the success of the operations., • Must pass assessment test(s) Competency Summary At U. S. Steel all employees are expected to display the following core competencies every day to advance corporate, team and individual goals: Think:Think Critically and Drive Change Lead:Develop Talent and Collaborate Do:Empower Performance and Deliver Results Company Overview Since 1901, U. S. Steel has been a recognized leader in steel production. Today, as the first North American steel company to have declared a 2050 net-zero greenhouse gas emissions goal, we remain as innovative as ever, leading transformation across our industry while continuing to make products for everyday life - from industries as far ranging as automotive, construction, containers and packaging, appliances, and energy. Underneath it all is our Culture of Caring, which shows up in our community partnerships, charitable contributions, company-sponsored employee volunteer initiatives, scholarship programs, leadership training, and much more. And of course, it takes shape in a steadfast commitment to safety first in our workplaces and respect for our employees, who are United by Steel. We are honored to have earned accolades and awards from well-regarded organizations, including the following: • Ethisphere’sWorld’s Most Ethical Companies® 2022, ’23, ‘24, • Disability: IN’s Best Places to Work for Disability Inclusion 2021, ’22, ’23, ‘24, • Human Rights Campaign Foundation’sEquality 100 Award 2020, ’21, ’22, ’23-24, ‘25, • Military Times’Best for Vets: Employers 2023, ‘24 Conducting business with integrity and with the highest ethical values has underpinned U. S. Steel’s success for over 100 years, and it remains critical to our company’s success in the future. U. S. Steel is an Equal Opportunity Employer. It is our policy to provide equal employment opportunity (EEO) according to job qualifications without discrimination on the basis of race, color, religion, ancestry, national origin, age, genetics, sexual orientation, sex, gender identity, disability status or status as a protected Veteran or any other legally protected group status. (California residents may visitwww.ussteel.com/CANoticeregarding collection of personal information and U. S. Steel's privacy practices.) You should be proficient in: • Mechanical Troubleshooting Skills, • Mechanical Testing, • Mechanical Assembly Skills, • Machine Safety Inspections

Job Description Crane Service Manager Position Summary: For over 150 years, Morgan has led the way in transforming the metals industry. We don’t just build world-class material handling systems—we create safer, smarter, and more efficient solutions that empower our customers and elevate our communities. Be part of a company that is driven by a passion for innovation and a commitment to sustainability. Due to continued growth, we are seeking a full-time Crane Service Manager to join our team. This role involves assembling, installing, and maintaining Morgan’s industrial overhead cranes at customer sites across the U.S. You’ll be part of a team that ensures innovation comes standard with every order. Join us in fulfilling our vision: To challenge the possibilities of today by thinking differently. Responsibilities: • Assemble, install, wire, and commission Morgan industrial overhead cranes at customer sites nationwide., • Perform preventative maintenance and inspections on overhead cranes., • Troubleshoot and repair mechanical and electrical systems, including AC and DC electrical components., • Work in field-based environments including industrial sites and manufacturing facilities., • Safely operate at heights and heavy equipment in varying weather conditions. Education/Experience: • High school diploma or GED required., • 3–5 years of experience in crane service, maintenance, or a related field., • Welding experience is a plus., • Strong knowledge of mechanical, electrical, and hydraulic systems., • Ability to read blueprints and use metrological instruments (e.g., micrometers)., • Basic organization, communication, and problem-solving skills., • Familiarity with OSHA regulations and crane safety standards., • Valid driver’s license and clean driving record., • Ability to travel 75–90% of the time, including overnight stays., • Must pass a background check and drug screening., • Must be 21 years or older. Preferred Skills in One or More Areas: • Millwright work, • Iron work, • Pipefitting, • Electrical meters, • Basic machining, • Basic welding, • Basic rigging Benefits: • Guaranteed minimum of 40 hours per week, • Competitive wages based on experience, • Travel per diem and expense reimbursement, • Comprehensive benefits package including:, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • 401(K) with matching, • Paid time off, • Company-provided tools and equipment. About Morgan: For more than 150 years, Morgan Engineering has created a legacy as a world leader in material handling systems. Through the design, production and service of large-scale industrial overhead and gantry-type cranes and mill equipment, we provide the innovative technology and engineering expertise to move our clients’ businesses forward. To learn more about our company or apply for this position, visit www.morganengineering.com. Disclaimer: Morgan Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Navarro Research and Engineering is recruiting a Mechanical Engineer in West Mifflin, PA. A DOE L Clearance (or DOD equivalent) is required to be considered for this position. Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean energy and deliver effective solutions for complex challenges in the nuclear and environmental fields. Joining Navarro means being a part of an exceptional team committed to quality and safety while also looking for innovative strategies to create value for the client’s success. Headquartered in Oak Ridge, Tennessee, Navarro has active programs in place across the nation for DOE/NNSA, NASA, and the Department of Defense. Do you want to work for the world's best Navy? Work with a team of engineers supporting repair technology development efforts by leading test programs both within a laboratory setting and via commercial subcontracts. This challenging and rewarding position offers opportunities to continue expanding technical skills through assignments involving both established and novel repair technologies. Opportunities to improve interpersonal skills may occur via interfaces with stakeholders and support groups across the Naval Nuclear Laboratory, our shipyards, and Naval Reactors Headquarters in Washington, DC. Applicant must be able to plan, follow, and execute work efforts, as well as conceive and produce technical designs, instructions and procedures. Candidate will also contribute to the development of novel repair techniques by drafting, placing, following and reporting subcontracted repair method development/demonstration contracts. The position will also require some travel to vendors and shipyards to support project planning, equipment testing and repair deployment. Repair efforts may include epoxy/composite technologies, mechanical/machining processes, and arc welding technologies. Requirements BS Degree in Mechanical Engineering or related field from an accredited college or university and a minimum of 5 years of relevant experience; or MS Degree in Mechanical Engineering or related field from an accredited college or university and a minimum of 2 years of relevant experience. The candidate will need to have or learn the ability to develop and interpret specifications, drawings, and engineering standards. Applicant must be able to plan and execute test programs, design experiments, analyze experimental results, and assist with the preparation of technical reports. Candidates must have digital design/CAD skills, and preferably will also have familiarity with digital data acquisition hardware and software. The candidate will be asked to lead/execute laboratory operations in a productive, timely, and compliant manner. Desired Knowledge, Skillset, and Abilities Candidates that have a knowledge of materials engineering and a background in industrial operations are preferred. Should be able to help develop, test, evaluate, and eventually qualify repair procedures either in the laboratory or via vendors and shipyards. Excellent individual initiative and creativity will enhance the successful candidate's value in this position. Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required. Navarro is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, religion, color, national origin, age, disability, veteran’s status or any classification protected by applicable state or local law. EEO Employer/Vet/Disabled Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation & Public Holidays), • Short Term & Long Term Disability

Job DescriptionAutomotive Collision Technician / Auto Body Technician Diehl Collision of Bellevue – Bellevue, PA Experienced Collision Repair Technicians Wanted | Full-Time Automotive Career Diehl Collision of Bellevue is hiring an experienced Automotive Collision Technician / Auto Body Technician to join our professional collision repair team in Bellevue, Pennsylvania. If you have experience in auto body repair, collision repair, frame repair, structural repair, dent repair, panel replacement, welding, and vehicle restoration, we want to hear from you. Our Bellevue collision center serves customers throughout Bellevue, Avalon, Ben Avon, Emsworth, West View, Ross Township, McKees Rocks, Pittsburgh, the North Hills, and surrounding Allegheny County communities. Collision Technician Responsibilities As an Automotive Collision Technician, you will be responsible for performing high-quality repairs and helping restore damaged vehicles to proper condition. Responsibilities may include: • Perform automotive collision and body repairs according to repair procedures, • Repair vehicles involved in minor and major collisions, • Remove and replace damaged body panels and components, • Perform dent repair and metal straightening, • Complete structural and frame repairs as required, • Perform welding and related metal repair procedures, • Repair or replace bumpers, fenders, doors, quarter panels, hoods, and other components, • Disassemble vehicles and identify additional or hidden collision damage, • Work from repair estimates and approved repair plans, • Verify proper fit, alignment, and operation of repaired components, • Follow manufacturer repair procedures and industry standards, • Maintain a clean, organized, and safe work area, • Communicate with estimators, parts personnel, painters, and management throughout the repair process, • Complete repairs efficiently while maintaining high standards for quality and safetyQualifications We are looking for experienced automotive professionals who take pride in their workmanship. Preferred qualifications include: • Previous experience as an Auto Body Technician, Collision Technician, Body Shop Technician, Automotive Body Technician, or Collision Repair Technician, • Experience with collision repair and vehicle disassembly/reassembly, • Knowledge of structural and cosmetic automotive repairs, • Welding and metal repair experience, • Ability to properly use collision repair tools and equipment, • Ability to read and follow repair estimates and repair procedures, • Strong attention to detail, • Ability to work efficiently in a busy collision repair environment, • Valid driver's license, • Dependable attendance and a professional attitude I-CAR, ASE, manufacturer, or other collision repair certifications are a plus. Why Join Diehl Collision of Bellevue? Diehl Collision of Bellevue is part of the growing Diehl Automotive organization and provides collision repair for all makes and models. Our collision technicians have access to modern repair equipment and a professional facility designed to handle everything from everyday body repairs to more extensive collision work. We are looking for technicians who want a stable automotive career, consistent work, professional working environment, and opportunities to grow within the automotive collision repair industry. Location Diehl Collision of Bellevue 500 Lincoln Avenue Bellevue, PA 15202 Conveniently located for automotive professionals searching for collision repair jobs in Bellevue, Pittsburgh, Avalon, Ben Avon, Emsworth, West View, Ross Township, McKees Rocks, North Hills, and Allegheny County, PA. Apply Today If you are an experienced Collision Technician or Auto Body Technician in the Pittsburgh area looking for your next career opportunity, apply today to join the team at Diehl Collision of Bellevue. We are interested in hearing from experienced technicians with backgrounds in: Auto Body Repair | Collision Repair | Automotive Body Work | Frame Repair | Structural Repair | Dent Repair | Panel Replacement | Welding | Body Shop Repair | Automotive Refinishing Preparation | Vehicle Restoration | Collision Center Repair | Automotive Repair Apply today and build your career with Diehl Collision of Bellevue. Indeed Search Keywords Collision Technician, Auto Body Technician, Automotive Collision Technician, Body Shop Technician, Collision Repair Technician, Auto Body Repair Technician, Automotive Body Repair, Frame Technician, Structural Technician, Collision Repair, Body Repair, Dent Repair, Automotive Technician, Auto Body Jobs, Collision Technician Jobs, Body Shop Jobs, Pittsburgh Collision Jobs, Bellevue PA Automotive Jobs, Pittsburgh Auto Body Technician, Allegheny County Automotive Jobs

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Company parties, • Dental insurance, • Flexible schedule, • Health insurance, • Opportunity for advancement, • Paid time off, • Vision insurance General Description / Language to Use for Job Postings: The production tech/assembler is responsible for kitting, assembling, and transforming product according to bill of materials, work instructions, and other customer documentation to ensure that final product meets all customer specifications. Reports to: Operations Manager Responsibilities: · Review customer part file for latest version of bill of material, work instructions, engineering drawings, control plans, and/or other part specifications prior to commencing production. · Perform assembly steps using hand tools and power tools including, but not limited to, cutters, grinders, drill presses, power crimpers, heat guns, etc. · Pull correct products and quantities from bin location and accurately measure and cut raw materials · Work with adhesives, solvents and various other chemicals · Conduct in-process inspections to ensure subassemblies meet customer specifications and route finished goods to appropriate personnel for further handling or final inspection process · Apply correct product identification labels to parts, assemblies and final packaging · Adhere to safety requirements for working in production & warehouse environments and maintain a safe, clean, and orderly workspace · All other duties as assigned by Production Manager Minimum Skills and Qualifications: · Manual dexterity necessary to use hand-held tools and to perform assembly efficiently. · Ability to read and follow Work Instructions · Good attention to detail and ability to perform work accurately, thoroughly, and efficiently. · Ability to identify material and information on parts · Ability to work efficiently in a self-directed manners and as part of a team. · High school diploma or GED Desired Skills and Qualifications: · Experience using automatic wire processing equipment · Experience using test equipment · Ability to read and interpret technical drawings · Experience and familiarity with soldering, assembling and inspecting electronic assemblies up to IPC-A-610, IPC-620A and/or J-STD-001 standards · Experience and familiarity with brazing or torch operation in joining metals · Hands-on experience with brazing, welding, and torch operation to join various metals. · Some computer skills and/or experience with ERP software · Problem solving skills · Experience with Quality Management System documentation · Willingness to contribute to the continuous improvement of production processes

Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. Responsibilities • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost, and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Qualifications • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Must be able to pass thorough background check Benefits The Company offers the following benefits for this position, subject to applicable eligibility requirements and annual updates: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Group Life Insurance, • Disability Insurance, • 401k Retirement Plan with match, • Referral Bonus (“Cash From Crash”), • 5 Paid Holidays We are committed to providing competitive compensation for this role. The actual offer will be based on various factors, including but not limited to: job related knowledge, skills, experience, relevant certifications and qualifications. This position is paid on a commission/ flag rate structure. Flag pay is guaranteed to meet local minimum wage requirements for all hours worked each week. The compensation range listed is the average flag pay range for a typical full-time employee in this position. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Submit a Referral Software Powered by ICIMS Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $163,080.00/Yr. ID 2026-22598 Category Body Technician Position Type Regular Full-Time Location : Postal Code 15235 Location : Address 326 Rodi Road Remote No Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $163,080.00/Yr. Prioritization Tier 1 – Priority

Job Description Universal is looking for responsible, energetic new team members to support our manufacturing process. JOIN OUR TEAM TODAY Universal Stainless & Alloy Products, Inc., established in 1994, is headquartered in Bridgeville, PA, with plants in North Jackson, OH, Dunkirk, NY, and Titusville, PA. Universal Stainless produces semi-finished and finished specialty steel long products and plate including stainless steel, tool steel, bearing steel, gear steel, and aircraft quality low alloy steels for use in a variety of industries, some you may know: Boeing, Ford, Chrysler, CAT, Toshiba, and GE Energy to name a few. Universal is committed to providing the best quality, delivery, and service possible. Perform electrical maintenance repair work throughout the mill. Basic Responsibilities • Maintain and replace motor bearings., • Maintain control panels, switches and wiring., • Maintain, inspects and repair all breakers., • Inspect transformers., • Perform general electrical maintenance on assigned area., • Operate overhead crane and/or fork truck to move electrical supplies or equipment., • Interpret blueprints and wiring diagrams., • Perform electromechanical rebuilds of plant production equipment., • Assist in installation of new equipment and relocation of existing equipment., • Maintain a safe and clean work area. Reports to: • Generally, works independently and not closely supervised., • Position reports to Maintenance Supervisor. Tools and Equipment • All types of electrical repair tools, wrenches, sledges, volt meters, rope and rope blocks, soldering torches, jacks, armature testing equipment, magnetos, pliers, screw drivers, and miscellaneous hand tools. Skills • Ability to interpret blueprints and wiring diagrams., • Tac-welding skills, • Analytical ability Experience • Previous electrical experience in industrial/manufacturing environment. Education/Training Must have a two (2) year post high school education (2 yr. Vocational Technical School) Successfully receive a passing score on the Ramsey RR47-A test or equivalent and applicable test stand. Must be able to demonstrate electrical knowledge with a walk through of prints. Must have working knowledge of basic mechanical and electrical. Pay & Benefits: • Benefits start on the first day (Medical, Dental, Vision, Prescription Drug, HAS, FSA), • Company paid life insurance, • Company paid short and long-term disability insurance, • Profit sharing, USW Pension, 401K Universal Stainless is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Universal is looking for responsible, energetic new team members to support our manufacturing processes. JOIN OUR TEAM TODAY Universal Stainless & Alloy Products, Inc., established in 1994, is headquartered in Bridgeville, PA, with plants in North Jackson, OH, Dunkirk, NY, and Titusville, PA. Universal Stainless produces semi-finished and finished specialty steel long products and plate including stainless steel, tool steel, bearing steel, gear steel, and aircraft quality low alloy steels for use in a variety of industries. Universal is committed to providing the best quality, delivery, and service possible. The Electrician is responsible for performing electrical maintenance, troubleshooting, repair, and installation throughout the mill. This position supports the safe and reliable operation of plant production equipment and electrical systems. Basic Responsibilities: • Perform electrical maintenance and repair work throughout the mill., • Maintain, inspect, repair, and replace electrical components, equipment, and systems., • Maintain and replace motor bearings as required., • Maintain control panels, switches, wiring, and related electrical components., • Maintain, inspect, and repair electrical breakers., • Inspect transformers and identify potential electrical issues., • Perform general electrical maintenance within assigned areas., • Troubleshoot and repair electrical and electromechanical equipment., • Perform electromechanical rebuilds of plant production equipment., • Interpret electrical blueprints, schematics, and wiring diagrams., • Assist with the installation of new equipment and relocation of existing equipment., • Operate overhead cranes and/or forklifts to safely move electrical supplies, tools, and equipment as trained and authorized., • Maintain a safe, clean, and organized work area., • Follow established safety procedures, work instructions, and electrical safety practices., • Work cooperatively with maintenance, manufacturing, and other plant personnel., • Perform other duties as assigned. Safety-Sensitive Position THIS IS A SAFETY-SENSITIVE POSITION. PROPER USE OF ALL REQUIRED PERSONAL PROTECTIVE EQUIPMENT (PPE) IS MANDATORY. Employees must follow all company safety procedures and PPE requirements for their assigned work area. Employees must be willing and able to comply with all required PPE, safety procedures, and work practices. Work Environment: • Work is performed in a manufacturing environment around industrial equipment, electrical systems, machinery, steel products, and materials., • Employees may work in different manufacturing areas based on operational needs., • Employees may work around energized electrical equipment, moving machinery, heavy materials, and industrial processes., • Ability to work safely in a manufacturing environment is required., • Employees may be required to work extended shifts, overtime, weekends, and varying schedules based on operational needs. Schedule: • Full-time hourly position., • 6:00am-4:00pm Monday-Saturday, • Start times may be flexible based on department and operational needs., • Overtime is required as needed., • Work schedules may reach up to 72 hours per week based on operational requirements., • Flexibility to work in different areas and departments is required. Skills: • Ability to interpret electrical blueprints, schematics, and wiring diagrams., • Strong electrical troubleshooting and analytical skills., • Working knowledge of basic mechanical and electrical systems., • Ability to diagnose and repair electrical and electromechanical equipment., • Ability to safely use electrical testing equipment and hand tools., • Ability to work independently with limited supervision., • Ability to follow written and verbal instructions., • Strong work ethic and reliable attendance., • Ability to work cooperatively with maintenance and production personnel., • Ability to maintain a safe and organized work area., • Welding or tack-welding skills preferred. Experience: • Previous electrical experience in an industrial or manufacturing environment required., • Experience troubleshooting and repairing industrial electrical equipment preferred., • Experience with electrical control panels, switches, wiring, breakers, and transformers preferred., • Experience with electromechanical equipment and industrial machinery preferred. Education/Training: • Two-year post-high school education from a vocational technical school or equivalent electrical training required., • Must successfully receive a passing score on the Ramsey RR47-A test and applicable test stand., • Must demonstrate electrical knowledge through a review/walk-through of electrical prints., • Must have working knowledge of basic mechanical and electrical systems., • Additional on-the-job training will be provided as required. Supervision: • Generally works independently and is not closely supervised., • Position reports to the Maintenance Supervisor. Tools & Equipment: • Electrical repair tools., • Volt meters and electrical testing equipment., • Hand tools including wrenches, pliers, screwdrivers, and related tools., • Sledges, jacks, rope, and rope blocks., • Soldering equipment and torches., • Armature testing equipment and magnetos., • Other electrical, mechanical, and maintenance equipment as required. Physical Requirements: • Must be able to safely work around electrical equipment, industrial machinery, and steel products., • Must be able to stand, walk, bend, reach, and work in a manufacturing environment for extended periods., • Must be able to safely use hand tools and electrical testing equipment., • Must be able to work at heights and in various positions as required for electrical maintenance., • Must be able to wear required PPE for assigned work areas., • Must be able to work extended shifts and overtime as required. Training & Growth: Universal provides on-the-job training and opportunities to develop technical skills across multiple manufacturing and maintenance areas. Employees will have the opportunity to expand their electrical and electromechanical knowledge, develop troubleshooting skills, and pursue future growth opportunities within the company. We are looking for individuals who are reliable, safety-focused, technically skilled, have a strong work ethic, and are interested in developing their career in industrial electrical maintenance. Pay & Benefits: • Benefits start on the first day of employment (Medical, Dental, Vision, Prescription Drug, HSA, FSA), • Company paid life insurance equal to annual salary, • Company paid short and long-term disability insurance, • Profit sharing, • USW Pension, • 401K, • Paid holidays, • Paid vacation Universal Stainless is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Schedule: • Full-time hourly position., • 6:00am-4:00pm Monday-Saturday, • Start times may be flexible based on department and operational needs., • Overtime is required as needed., • Work schedules may reach up to 72 hours per week based on operational requirements., • Flexibility to work in different areas and departments is required.

Job DescriptionGeneral Production Worker$18.50/Hour | Monday-Friday | 4:30 AM - 1:00 PMStart Your Manufacturing Career with a Stable, Growing Team Are you looking for a hands-on role where you can learn valuable manufacturing and machine operation skills? We are seeking motivated, dependable individuals to join our production team as a General Production Worker. No specialized RF welding experience is required. We provide training and opportunities to develop skills in machine operation, blueprint reading, quality inspection, and advanced manufacturing processes. This is an excellent opportunity for candidates with production, warehouse, machine operating, or general labor experience who want to build a long-term career in manufacturing. Pay & Schedule Pay: $18.50 per hour Shift: Monday-Friday, 4:30 AM - 1:00 PM Enjoy a consistent first-shift schedule and have your afternoons free. What You'll Do As a General Production Worker, you'll play an important role in keeping production running smoothly and efficiently by: • Moving, preparing, cutting, inspecting, and packaging materials for production, • Assisting with machine operation and daily manufacturing workflows, • Learning to safely operate Radio Frequency (RF) welding equipment, • Reading and following blueprints, work instructions, and production specifications, • Monitoring production equipment and reporting any issues or abnormalities, • Performing quality checks to ensure products meet company standards, • Maintaining a clean, organized, and safe work environment, • Supporting team members and helping meet daily production goalsWhat We're Looking ForRequired Qualifications, • Experience in manufacturing, production, warehouse, machine operation, or general labor, • Ability to perform physical work, including lifting, moving, and handling materials, • Strong attention to detail and commitment to quality, • Reliable attendance and punctuality, • Ability to follow instructions and work effectively in a team environment, • Willingness to learn new equipment and manufacturing processesPreferred Qualifications, • Previous manufacturing experience, • Experience operating production machinery or equipment, • Exposure to welding equipment or RF machinery, • Blueprint reading experience Job Type & Location This is a Contract to Hire position based out of Whitehall, PA. Pay and Benefits The pay range for this position is $18.50 - $18.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Whitehall,PA. Application Deadline This position is anticipated to close on Oct 6, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. Responsibilities • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost, and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Qualifications • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Must be able to pass thorough background check Benefits The Company offers the following benefits for this position, subject to applicable eligibility requirements and annual updates: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Group Life Insurance, • Disability Insurance, • 401k Retirement Plan with match, • Referral Bonus (“Cash From Crash”), • 5 Paid Holidays We are committed to providing competitive compensation for this role. The actual offer will be based on various factors, including but not limited to: job related knowledge, skills, experience, relevant certifications and qualifications. This position is paid on a commission/ flag rate structure. Flag pay is guaranteed to meet local minimum wage requirements for all hours worked each week. The compensation range listed is the average flag pay range for a typical full-time employee in this position. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Submit a Referral Software Powered by ICIMS Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $162,900.00/Yr. ID 2026-22723 Category Body Technician Position Type Regular Full-Time Location : Postal Code 15205 Location : Address 55 Crennell Avenue Remote No Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $162,900.00/Yr. Prioritization Tier 1 – Priority

Job Description Call Liza Rodriguez for a quick phone screen: 281-612-1870 Location: Grand Prairie, MN Pay: $35.00 – $38.00 per hour (based on experience) Schedule: Full-Time Position Overview We are seeking a highly skilled Senior Automotive Technician / Shop Lead with deep expertise in electrical diagnostics, advanced vehicle systems, and full-service mechanical repair. This role is ideal for a technician with extensive hands-on experience who can lead complex diagnostics, mentor technicians, and support shop operations in a fast-paced, quality-driven environment. Key Responsibilities • Perform advanced diagnostics on electrical, mechanical, and electronic vehicle systems, • Troubleshoot complex issues involving CAN bus systems, ECUs, sensors, and wiring, • Utilize schematics, oscilloscopes, scan tools, and diagnostic software, • Complete engine, transmission, suspension, brake, and drivetrain repairs, • Diagnose and repair A/C systems (EPA Section 609 compliant), • Conduct state inspections and emissions testing, • Lead and support technicians with complex repairs and diagnostics, • Oversee workflow, repair prioritization, and shop efficiency, • Communicate technical findings clearly to customers and team members, • Maintain high standards of safety, accuracy, and workmanship⚠️ REQUIRED QUALIFICATIONS, • 10+ years of professional automotive technician experience (20+ preferred), • Proven expertise in electrical diagnostics and modern vehicle systems, • Strong understanding of:, • CAN bus systems, • ECUs, BCMs, TPMS, sensors, relays, • Experience using diagnostic tools (scan tools, oscilloscopes, multimeters), • State Inspection & Emissions Certification (or ability to obtain), • Valid driver’s license with clean driving record, • Ability to perform heavy mechanical repairs and full rebuilds, • Strong leadership, mentoring, and communication skills⭐ PREFERRED QUALIFICATIONS, • Experience as a Shop Foreman, Lead Tech, or Service Manager, • Experience with heavy trucks or fleet vehicles, • MIG welding / fabrication experience, • Familiarity with ADAS-related systems (TPMS, sensors, calibration awareness), • Experience with Windows/Linux-based diagnostic systemsIDEAL CANDIDATE, • Expert-level troubleshooter with strong diagnostic discipline, • Natural leader who enjoys mentoring and developing others, • Detail-oriented with strong documentation habits, • Comfortable balancing hands-on work with leadership duties, • Committed to staying current with evolving vehicle technologyWHY APPLY, • Competitive $35–$38/hr pay, • Work on advanced diagnostics and complex repairs, • Leadership role with real impact, • ⚡ High-demand skillset with long-term growthAPPLY TODAY Call Liza Rodriguez now for a quick phone screen: 281-612-1870 Serious candidates are encouraged to apply immediately — top talent moves fast! Powered by JazzHR LsgmOiaxC5

We are seeking an experienced Welder to join our team in Carnegie, PA.The ideal candidate will have hands-on experience welding pipe, plate, and structural steel in a fabrication or industrial environment.This position requires the ability to read and interpret blueprints and welding symbols and per

Pay Rate: 25-26/hr Schedule: 1st Shift: Monday-Friday, 6:30 AM-3:00 PM 2nd Shift: Monday-Thursday, 3:00 PM-1:30 AM Responsibilities: Troubleshoot and repair electrical, mechanical, and hydraulic equipment issues Perform welding and general equipment repairs Complete preventative maintenance and rout

Job Description Construction Pile Driver/Carpenter Foreman (Union Position) S&B USA Construction, a family of diversified heavy-civil and industrial construction companies recognized for safe and innovative infrastructure solutions. Our team of experienced professionals demonstrate an unparalleled commitment to safety, quality, and service on all our projects. We excel on projects with tight schedules and difficult working conditions. Our innovative solutions and customer focused approach provide our clients with unmatched value and quality. Position Summary: We are seeking an experienced and dedicated Construction Pile Driving and Carpenter Foreman to oversee daily operations on construction sites. The ideal candidate will lead a team of union craft employees, ensure adherence to safety standards, and ensure projects are completed on time and within budget. Specifically, this position will require previous knowledge working on phased bridge construction. Individuals must have knowledge and experience working with pile driving. More specifically working with impact pile driving using a crane and leads, vibratory pipe pile driving and vibratory sheet pile driving for cofferdams and shoring. Up to date welding certification is a plus. Individuals must have knowledge and experience in carpentry work building bridge formwork. This should include working with EFCO and standard formwork, critical lifting with complex rigging, working at heights on tall bridge structures, etc. Responsibilities/Functions: • Supervise and coordinate activities of construction workers and subcontractors., • Review project plans and specifications to ensure compliance and quality standards., • Working with the Superintendent to schedule work assignments and manage workflow to optimize productivity., • Monitor project progress and provide regular updates to project Superintendents., • Enforce safety regulations and maintain a safe working environment., • Conducts safety meetings with union craft employees; explains in detail the work to be accomplished and how it is to be accomplished, • Acts as OSHA defined "competent person" on job, • Conduct site inspections and ensure adherence to company policies and procedures., • Provide guidance to union craft employees on proper techniques and safety practices., • Resolve/report conflicts and address any issues that arise on the job site., • Maintain accurate records of work completed, materials used, and labor hours., • Collaborate with project managers, engineers, and architects to facilitate project goals., • Inspect work performed by subcontractors to ensure conformance with specifications Essential Skills and Experience: • Member in good standing of the local union., • High school diploma or equivalent; additional certifications in construction management or related fields preferred., • Minimum 5 years of experience in the construction industry; experience in a supervisory role preferred., • Strong knowledge of construction methods, materials, and safety regulations., • Must be well versed in the use of the EFCO forming system., • Excellent leadership and team management skills., • Effective communication and problem-solving abilities., • Ability to read blueprints and technical drawings., • Strong organizational skills and attention to detail., • Ability to add, subtract, multiply and divide in all units of measure. Ability to compute rate, ratio and percent., • The ability to communicate information and ideas so others will understand. Work Environment: • Regularly exposed to outside weather conditions., • Exposure to moving mechanical parts., • Ability to wear and work in personnel protective equipment including but not limited to hard hat, safety glasses, gloves, ankle-supporting safety-toed work boots and a safety vest. Physical Demands: • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Extensive moving or positioning heavy weighted materials (up to 50 lbs.)., • Must be able to traverse irregular and steep terrain., • Must be able to bend, stoop, and ascend/descend to reach materials or enter heavy equipment. Benefit Summary: Benefits through the union: Medical, Dental, Vision, EAP, 401(k), Life and AD&D Insurance, Time Loss Additionally, benefits offered by the company: Company Vehicle, Cell Phone Allowance, Paid Time Off, and Paid Holidays Core Values: Work Safely: Safety is our Culture Deliver Return: Earning a fair profit increases our long-term value Value People: Take Care of Employees and They Will Take Care of Clients Act with Integrity: Honesty Builds Trust Provide Solutions: Better Solutions Yield Greater Satisfaction S&B USA Construction and all its affiliate companies are committed to providing equal employment opportunities in all aspects of employment to qualified individuals without regard to the following criteria: race, color, religion, sex (including pregnancy, sexual orientation, gender identity) national origin, age, disability, genetic information, protected veteran status, as well as any other prohibited criteria under any local, state or federal law applicable to S&B USA Construction. As part of the firm's equal employment opportunity statement, S&B USA Construction will also take affirmative action to ensure that minorities, women, veterans, and qualified people with disabilities are considered for employment and promotional opportunities. If a reasonable accommodation is needed for the interview process, please contact Human Resources at recruiting@shikunusa.com or Phone: 412-471-4200 ext. 1032 Agency Policy: Please refer to our Agency Policy and disclaimer statement regarding resume submissions. https://www.shikunusa.com/notice-to-staffing-agencies

Job Description POSITION: Playhouse Overhire - Scenic Carpenter (Part-time) DEPARTMENT: Playhouse REPORTS TO: Scene Shop Supervisor PAY RATE: $18.00/hour PRIMARY FUNCTION: To construct and assist in the construction/set up in all aspects of the various scenic elements for the Pittsburgh Playhouse productions, related projects, and events; and to contribute to the creation of the highest standards in all the Playhouse operations. Duties include performing carpentry in the preparation and construction of scenic elements with deadlines set by department, assist with the installation and rigging of scenic elements, perform routine and special maintenance on stage equipment, shop equipment and stage houses, maintain all scenery during the run of the show, and perform other related duties as assigned. QUALIFICATIONS • Two years' relevant experience. Theatrical/film scenic carpentry and light MIG welding, • Knowledgeable of industry standard tools, operation, and safety, • Knowledgeable of industry best practice as it relates to scenic construction, • Great interpersonal and organizational skills, • Knowledgeable of industry standard rigging as it pertains to theatre DUTIES AND RESPONSIBILITIES: Essential: 1. Perform carpentry, welding and light metal fabrication duties in the preparation and construction of scenic elements. (40%), 2. Assist with the installation and rigging of scenic elements and instruct student crews on the operation of scenic elements. (20%), 3. Attend all "strike" calls. (10%), 4. Perform routine and special maintenance on stage equipment, shop equipment and stage houses. (5%), 5. Maintain all scenery during the run of the show. (5%), 6. Perform necessary duties required by outside events as assigned. (5%), 7. Maintain clean and safe work environment., 8. Other duties as assigned. Non-Essential: 1. Maintain safe, inclusive and professional work environment for staff, faculty, students and guests. (35%) 2 Relay shop needs to Scene Shop Supervisor. (25%) 1. Regularly check and upkeep with departmental and university communications. (20%) 1. Follow tech protocol. (20%) WORKING ENVIRONMENT: Occasional exposure to objectionable conditions or variations such as those found in variable weather conditions or light industrial settings. PHYSICAL DEMANDS: Job requires repetitively lifting average weight objects with repetitive bending and stooping. Frequently lifts heavy objects but alternating with lighter activities. Job may require physical exertion such as long periods of standing. Job may require above-average agility and dexterity.; Frequently work at a fast pace with unscheduled interruptions; and Mobility within the office. Ability to walk, sit, stand and climb stairs. Ability to use hands and fingers, to handle office equipment, records and files. Occasionally required to reach with arms and hands, and to stoop, kneel or crouch. Vision abilities required by this job include the ability to read and discern written errors on paper and electronic documents. Ability to talk and hear. Ability to lift up to 15 pounds. Job Posted by ApplicantPro

Job Description Navarro Research and Engineering is recruiting a Welding Engineer in West Mifflin, PA. An active DOE clearance or DOD equivalent is required to be considered for this position. Navarro is an award-winning provider of turnkey solutions, delivering comprehensive nuclear, environmental and technical services to federal agencies, commercial enterprises and private clients across the United States. Our expertise supports organizations such as the Department of Energy, the National Nuclear Security Administration, the Department of Defense and NASA, while also extending to commercial industries and private sector partners facing complex engineering, technical and environmental challenges. Navarro specializes in nuclear operations, environmental remediation, D&D, waste management, advanced energy, facilities management and technical and professional services. For more information, please visit Navarro-inc.com. Do you want to work for the world's best Navy? Work with a team of engineers assessing repair technologies both within a laboratory setting and via commercial subcontracts. This challenging and rewarding position offers opportunities to develop technical skills through complex assignments involving established as well as novel technologies, and interpersonal skills through numerous interfaces including stakeholders and support groups across the Naval Nuclear Laboratory, our shipyards, and Naval Reactors Headquarters in Washington, DC. Applicant must be able to assist the planning, follow, and execution of work efforts; conceive and produce technical instructions and procedures; track procurement actions / budget performance; and write technical submittals and recommendations. The position will also require some travel to vendors and shipyards to support project planning, equipment testing and repair deployment. Primary responsibilities will include teaming with other engineers as you identify, research, test, and evaluate metallic and non-metallic repair technologies, leveraging existing welding, machining, and other industrial processes. This includes project planning and reporting of project performance within NNL's broader repair technology development community. Desired Knowlege, Skillset, and Abilities Should be able to help develop, test, evaluate, and eventually qualify repair procedures in the laboratory, and consult with various fabrication vendors and shipyards to facilitate technology transfer. Repair operations which may be supported include gas tungsten arc welding, gas metal arc welding, shielded metal arc welding, epoxies/composites, and mechanical/machining processes. The candidate will need to have the ability or learn to develop and interpret specifications, drawings, and engineering standards. Applicant must be able to plan and execute work programs, design experiments, analyze experimental results, and prepare technical reports. Candidates that have demonstrated acumen in executing laboratory work are preferred. Familiarity with inspection methods is a plus. Excellent individual initiative and creativity will enhance the successful candidate's value in this position. Requirements BS Degree in Welding Engineering, Materials Science & Engineering, Mechanical Engineering or related field from an accredited college or university and a minimum of 5 years of relevant experience; or MS Degree in Welding Engineering, Materials Science & Engineering, Mechanical Engineering or related field from an accredited college or university and a minimum of 3 years of relevant experience. Candidates must have experience making technical presentations and be able to lead/execute laboratory operations in a productive, timely, and compliant manner. Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required. Navarro is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, religion, color, national origin, age, disability, veteran’s status, or any classification protected by applicable state or local law. EEO Employer/Vet/Disabled Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation & Public Holidays), • Short Term & Long-Term Disability

Job DescriptionMobile Mechanic Compensation & Benefits Highlights: • $30+/hour, commensurate with experience, • Medical, dental & vision coverage plus 401(k) match, • Paid time off, paid holidays & company-provided uniforms, • Company-sponsored CDL training & licensing, • Night-shift differential: +$2.50/hour, • Referral & annual incentive bonuses, • State-of-the-art shop & mobile service equipmentParking Lot Painting Company (PLP Co.), a Frontline Road Safety Group company, has built a reputation for being a premier specialty contractor involved in the installation and removal of pavement markings. Our customers look for us to provide a quality product and produce our product in a timely manner. Job Summary: We're looking for a skilled, reliable Mobile Mechanic who can diagnose and repair a variety of vehicles and equipment on-site, working independently across diverse field environments. Key Responsibilities: • Diagnose, repair, and perform preventive maintenance on vehicles and equipment ranging from light-duty to heavy-duty (Class 8) trucks, following OEM specifications and electrical, hydraulic, and pneumatic diagrams., • Provide on-site and roadside repairs, including emergency assistance and towing coordination., • Maintain and test tools and equipment to ensure safe, proper working condition., • Perform welding, fabrication, and DOT inspections as needed., • Follow all safety protocols and complete other duties as assigned. Qualifications: • Proven experience as a mechanic, preferably in a mobile service role, with strong diagnostic and problem-solving skills., • Experience with diesel and gas engines and hydraulics; welding/fabrication experience a plus., • High school diploma or GED required., • Valid driver's license required; CDL preferred, with a clean driving record (or insurable under the company's policy)., • Able to lift 50+ lbs and perform physically demanding work in all weather conditions., • Willing to work flexible hours — days, nights, weekends, and occasional travel — and pass DOT drug/alcohol screening., • Honest, punctual, safety-focused, and a strong team player.The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities, as needed. Parking Lot Painting Company (PLP Co.) is an Equal Opportunity Employer. Powered by JazzHR JCwLLCZybc

Job DescriptionFleet Mechanic $23–$35+/hour, commensurate with experience What We Offer: • Healthcare, 401(k) match, PTO, and paid holidays, • Company-sponsored CDL training & licensing, • Night-shift differential: +$2.50/hour, • Referral and annual incentive bonuses, • Company-provided uniforms and state-of-the-art shop & mobile equipment, • Opportunities for professional development and advancementParking Lot Painting Company (PLP Co.), a Frontline Road Safety Group company, is a premier specialty contractor known for high-quality, timely installation and removal of pavement markings. Job Summary: We're looking for a skilled, reliable Fleet Mechanic to diagnose, repair, and maintain vehicles and equipment — from light-duty trucks to heavy-duty (Class 8) trucks and operating equipment. This role calls for strong problem-solving skills and the ability to work independently. Job Responsibilities: • Diagnose, repair, and perform preventative maintenance on vehicles and equipment — from light-duty to heavy-duty (Class 8) trucks and operating equipment — per OEM specs and electrical, hydraulic, and pneumatic diagrams., • Remove and replace defective parts; test repaired equipment to confirm proper function., • Provide roadside assistance and coordinate towing when vehicles break down., • Maintain tools and equipment in good working condition; occasionally fabricate, weld, and cut parts., • Perform DOT inspections and adhere to all safety protocols., • Perform other related duties as assigned.Qualifications & Requirements:, • Proven experience as a mechanic, including diesel/gas engines and hydraulics., • High school diploma or GED required; welding/fabrication experience a plus., • Valid driver's license required (CDL preferred); clean driving record with no major violations in the past 5 years, or acceptable to our insurance provider., • Ability to lift/transport 50+ lbs and work in varying weather conditions, with strong manual dexterity and hand-eye-foot coordination., • Willing to work flexible hours — days, nights, weekends, and occasional travel — including 10+ hour shifts and 40+ hour weeks., • Must comply with PLP's Substance Abuse Policy and DOT Drug Control Program, including pre-employment and random testing.Key Competencies:, • Honest, dependable, punctual, and self-disciplined, with a strong work ethic., • A safety-first team player who communicates well and performs under time pressure.This job description reflects the general nature of the work performed; it is not an exhaustive list of duties, and additional responsibilities may be assigned as needed. Parking Lot Painting Company (PLP Co.) is an Equal Opportunity Employer. Powered by JazzHR XBGPiuQqzf

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards.We are currently looking to hire a full-time Tank Builder / Welder (Nationwide) Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matterTo Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR WknaxrKbt1

Job Description Job Duties and Responsibilities: • Welding, fabricating, repairing, and maintaining all equipment, both rented and owned., • Operating all authorized and required welding equipment., • Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage., • Prepares, assembles, and tack welds parts that need to be welded., • Following and upholding all required safety rules and regulations., • Recognizing and correcting safety hazards., • General housekeeping duties relating to equipment, materials, and cleaning of work area., • Supporting any other shop activities, as required., • Check over finished work to ensure that it's within the desired tolerances., • Maintain all of the tools and equipment assigned to you. Knowledge, Skills and Abilities: • Thorough understanding of machines and tools used for welding., • Ability to read and understand the welding instructions from drawings, models, and blueprints., • Ability to mark-up these construction drawings with as-built information., • Excellent ability to read and listen to assignments given in a variety of forms., • Basic understanding of mathematics, as related to welding assignments., • Ability to work in different environments (i.e. inside, outside, very hot, very cold, etc.). Education and Experience Requirements: 5+ years of welding experience Physical Requirements: • Prolonged periods (8+ hours) of standing and walking while wearing all required PPE., • Must be able to lift and carry up to 50 pounds., • Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials.

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder. Work Region: Braddock, PA Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR y6nm8b66yC