Engineering jobs in Provo, UtahCreate job alerts

Job DescriptionSalary: $55k-$85k Compensation: $55,000$85,000 salary Full-time On-site Location: Provo, UT About Elkington Motors We build high-performance electric vehicles that are affordable, personalized, and built to last. Our team is small, fast, and obsessively hands-on, designing, testing, and iterating to ship real product, not slide decks. The Role Youll be the electrical owner who brings our EV powertrain to life, integrating motors, inverters, battery systems, and control units into a cohesive, reliable system. Expect to wire, crimp, solder, flash, log, and troubleshoot until everything works flawlessly on the bench and on the road. What Youll Do • Integrate motors, inverters, battery packs/BMS, DC-DCs, chargers, and VCUs into complete vehicle systems., • Own low-voltage and high-voltage harness bring-up: routing, terminations, strain relief, labeling, and documentation., • Diagnose and resolve electrical issues (gremlins) across HV/LV systems using DMMs, oscilloscopes, and CAN tools., • Flash, configure, and validate VCUs, inverters, and BMS firmware; support calibration and parameter tuning., • Design simple test fixtures and procedures for bench validation and pre-road-test verification., • Collaborate with Controls on software releases and with Mechanical on packaging, grounding, and thermal., • B.S. in Electrical Engineering (required)., • 2+ years of full-time, professional experience in electrical systems (automotive, EV, e-mobility, robotics, or similar)., • Proficiency with wiring, crimping, soldering, harness building, and reading schematics., • Comfort with CAN bus (DBC basics, logging, and analysis) and flashing embedded controllers., • Strong hands-on troubleshooting mindset; you can isolate faults methodically and fix them., • EV domain exposure: BMS, inverter control, contactor logic, pre-charge, HV safety., • Tools: Vector/Kvaser CAN, oscilloscope fundamentals, KiCad/Altium basics., • Familiarity with ISO 26262 concepts, FMEA, or automotive validation practices., • Basic CAD literacy for packaging/routing collaboration., • Direct impact: Your work lands in vehiclesfast., • Modern tech stack: Latest EV components, tools, and rapid iteration., • Low red tape: Clear goals, quick decisions, high accountability., • Start date: Immediate, • Work setting: On-site, shop/test environment; some lift, bend, and vehicle work required., • Work authorization: Must be authorized to work in the U.S.

Job Description We are seeking a highly motivated Automation Engineer to join our engineering team. This position is ideal for a student or recent graduate with a strong passion for automation, machine design, and hands-on problem solving. As an Automation engineer, you will support ongoing projects and gain exposure to real-world automation systems. RESPONSIBILITIES • Lead on Projects, • Oversee Budget & Purchasing, • R&D Development, • Assist with 3D CAD modeling and mechanical design, • Support PLC and robot programming tasks, • Participate in machine prototyping and hands-on fabrication, • Collaborate with a multidisciplinary team of engineers and technicians, • Bachelor's Degree in Engineering or Equivalent Professional Experience, • High level of interest in automation technologies, • Basic knowledge of 3D CAD (e.g., SolidWorks, Inventor), • Exposure to PLC and/or robot programming (e.g., Allen-Bradley, ABB, FANUC), • Strong problem-solving and analytical skills, • Eagerness to learn, work hard, and grow in a team-oriented environment Nature's Sunshine is dedicated to being a Force of Nature that champions social and environmental wellness. We are focused on building a team of professionals with diverse backgrounds and experiences to become the natural supplement company of the future. By celebrating the individuality and unique perspectives of our workforce, we empower our employees to share the healing power of nature with more people around the world. And through our commitment to sustainable processes, renewable energy usage and waste reduction initiatives, we're devoted to preserving nature and its power for future generations. We believe we are stronger together, and our ongoing commitment to diversity, equity, inclusion and belonging ensures that every employee is treated with fairness and respect. Because doing what's right-in the right way-is how we succeed as a company and a society. Job Posted by ApplicantPro

Job Description We are a dynamic and innovative company specializing in UAV systems, committed to developing cutting-edge technology for diverse applications. We are seeking an experienced Test Design Engineer Contractor to evaluate, root-cause, and harden PCBA-level test fixtures to ensure robust functionality in a production environment. The position involves working on projects for the Department of Defense, and U.S. citizenship is required. This project is for a 6-month contract Responsibilities • Design, evaluate, and enhance PCBA-level functional test fixtures, including troubleshooting and root cause analysis., • Develop, optimize, and maintain test scripts using JTAG boundary scan tools., • Strengthen and validate communication interfaces between bench-top equipment and Windows-based systems via USB and other protocols., • Collaborate with Electrical Design Engineers to provide PCB layout and design recommendations., • Advise on wiring strategies and best practices to improve system reliability and maintainability., • Utilize bench-top test equipment (e.g., multimeters, oscilloscopes, logic analyzers) to assess signal integrity and system performance., • Assess and recommend off-the-shelf hardware solutions such as relay boards, USB analyzers, and other specialized tools., • Partner with design engineers to enhance the functionality and robustness of test fixtures., • Develop automated test procedures and documentation to streamline validation processes., • Maintain and update test infrastructure, including calibration and preventive maintenance of test equipment., • Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field., • Experience in test fixture design, including mechanical and electrical integration., • Minimum of 3 years of experience in embedded systems or hardware/software test engineering., • Strong proficiency in troubleshooting and root cause analysis of both hardware and software systems., • Experience with C# and other programming languages, • Hands-on experience with electrical and mechanical hardware, including PCB handling and ESD-sensitive devices., • Solid understanding of electrical design principles, schematics, and layout practices., • Experience with digital and analog circuit design, including low and medium power signal systems., • Proficient in using test equipment such as oscilloscopes, multimeters, power supplies, and logic analyzers., • Experience with JTAG boundary scan tools (e.g., XJTAG, Corelis, or similar) for test script development and debugging., • Familiarity with Windows-based test systems and integration of bench-top equipment via USB and other communication protocols., • Familiarity with communication protocols and physical interfaces such as USB, UART, SPI, I2C, Ethernet, RS232, LVDS, and CSI., • Experience developing automated test procedures and maintaining test documentation., • Familiarity with test infrastructure maintenance, including calibration schedules and preventive maintenance routines., • Skilled in scripting and automation for test development and execution., • Strong written and verbal communication skills for documenting procedures and reporting findings. Company DescriptionWe are a dynamic and innovative company specializing in UAV systems, committed to developing cutting-edge technology for diverse applications. The position involves working on projects for the Department of Defense, and U.S. citizenship is required.We are a dynamic and innovative company specializing in UAV systems, committed to developing cutting-edge technology for diverse applications. The position involves working on projects for the Department of Defense, and U.S. citizenship is required.

Job Description Position Purpose/Summary: The Manufacturing Engineer will be responsible for process improvement through systemic problem solving, statistical analysis, Lean Six Sigma principles, and process optimization. This role will focus on data-driven decision-making and continuous process improvements to support the development and sustainment of the X-ray Detectors business unit. Essential Duties: • Use systemic problem solving methodologies in conjunction with statistical knowledge to drive continuous improvement, reduce variability, and improve overall yield., • Conduct root cause analysis (RCA) and Failure Mode and Effects Analysis (FMEA) to resolve production issues., • Work closely with the Quality and management team to implement corrective and preventive actions (CAPA) based on data-driven insights and feedback from customers., • Support Kaizen events, Value Stream Mapping (VSM), and standard work (SW) initiatives to drive waste reduction and efficiency., • Oversee the performance of processes and tests, then document the results of the process or test., • Develop, edit, and maintain standard work combination sheets (SW), process flow charts, and value stream maps (VSM)., • Support the incoming quality assurance (IQA) team with resolving non-conforming report (NCR) action items and countermeasures., • Become a proficient subject matter expert (SME) on the products and processes in the assigned area. To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position. • Adaptability: Understands changes in work group tasks, situations, and the department as well as the logic or basis for change; actively seeks information about changes affecting their job. Considers changes, production issues, and new situations as opportunities for learning or growth., • Engineering Processes: Working knowledge of responsibilities and tasks performed by various engineering departments/disciplines (e.g., design, test, software, technology). Working knowledge of the interaction between departments/ disciplines and how their products/processes affect one another and impact non-engineering processes (e.g., operations, logistics, business)., • Motivation: Self-starter able to function with minimal supervision. Actively coordinates with other team members to proactively identify and resolve manufacturing quality issues., • Communication: Strong English communication skills, both written and verbal., • B.S. or M.S. in engineering, or science related discipline (accredited university preferred)., • 5+ years of experience in a manufacturing environment., • Proficiency in statistical software (Minitab, JMP, R, or equivalent) for data analysis (required)., • Lean Six Sigma Green Belt certification and/or lean manufacturing training., • DOE matrix creation and interpretation., • sit for 2/3 of the time, • walk/transport for 1/3 of the time, • talk/hear 2/3 of the time, • reach with hands and arms 1/3 of the time, • use hands to grasp, fingers to feel 1/3 of the time, • lift up to 10 pounds and more than 25 pounds 1/3 of the time, • clearly see at 20 inches or less, • distinguish colors Job Posted by ApplicantPro

Job DescriptionSalary: Sample engineer job description At [Company X], we believe innovation starts with the consumer. This approach has propelled our success in developing real-world solutions that impact peoples daily lives. We are seeking an experienced engineer to help drive our solutions-based business model and take our designs to the next level. The engineer will be part of our development team, managing projects from concept to completion. From Day 1, our engineers can step away from the desk and work hands-on with several business divisions to design, develop, and test industry-leading solutions for our clients both national and international. The ideal candidate is a creative thinker who shares our passion for making peoples lives easier. Objectives of this role • Develop deep understanding of company, products, customers, goals, and business strategy; evaluate systems and processes; and identify areas for improvement, • Conceptualize and develop solutions based on project requirements and company standards by using simulations/modeling to support expansions and changes, • Develop and implement processes that improve production and deliver quality outputs by securing and managing service providers, inspectors, and other technical resources, • Meet [Company X]s quality standards by maintaining knowledge of relevant technologies and best practices and by adhering to national and local regulations, • Manage the execution and timely completion of projects by analyzing scope and determining specifications, establishing test methods for product investigations, analyzing test programs for adequacy and sequence, examining samples for compliance with requirements, and preparing reports, • Formulate plans with detailed calculations, drawings, diagrams, project specifications, and budget estimates, and interpret precast reinforcement shop drawings, civil grading plans, and structural drawings, • Maintain system functionality through rigorous testing, identify ways to improve efficiency and productivity, and generate maintenance and support activities for all existing solutions, • Monitor industry trends and implement appropriate methods for keeping production on the cutting edge, while meeting financial goals and generating cost savings, • Utilize software programs for preparing technical specifications, user documentation, presentations, and results tracking, • Seven or more years of experience as an engineer, • Strong electronic testing and database design capabilities, • Strong understanding of electronic manufacturing processes, • Strong focus on quality control, • Bachelors degree (or equivalent) in engineering from an ABET-accredited program, • Professional engineer (PE) certification, • Experience in software development and platform implementation, • Proven ability to analyze and troubleshoot production processes, • Strong project/team management skills

Job DescriptionLocation: Salt Lake City, Utah (Relocation Required)Salary Range: $115,000 – $170,000, depending on experience and qualificationsA growing fire protection engineering consulting firm is looking for a Fire Protection Consultant to join its Salt Lake City office. This is a permanent, full-time role with strong growth potential and the chance to work on diverse and challenging projects across the U.S.Why Consider This Opportunity? Salt Lake City is known for its breathtaking mountain scenery, year-round outdoor activities, a vibrant urban scene, and a cost of living that’s more affordable than many large cities. Whether you're into skiing, hiking, or simply looking for more room to breathe, this role offers the best of both worlds: exceptional career opportunity and an outstanding quality of life. This company is known for its supportive culture, high standards of technical work, and steady project pipeline. You'll be part of a collaborative team that values innovation and provides the tools and mentorship to grow professionally. Key Responsibilities: • Provide fire protection and life safety consulting services across a range of facility types nationwide., • Perform fire sprinkler and alarm system design, life safety code analysis, and performance-based fire engineering., • Conduct plan reviews, site visits, and building/fire code evaluations., • Classify and document hazardous materials for regulatory compliance in industrial settings., • Assess high-piled storage configurations and prepare permitting documentation., • Develop fire protection strategies and code alternatives in collaboration with design teams., • Prepare and peer-review detailed technical reports and project documents., • Support client relationships and contribute to business development initiatives- experience in this area is welcomed but not requiredQualifications:, • Bachelor’s degree in Fire Protection, Mechanical, Electrical, Chemical, or Civil Engineering., • 3 to 10+ years of relevant experience in fire protection engineering, life safety, or code consulting., • EIT or PE designation preferred, or on track for licensure., • Strong communication skills, with the ability to interact professionally with clients, contractors, and authorities., • Capable of working independently and meeting deadlines in a consulting environment., • Previous project management experience is a plus.Software Proficiency:, • Microsoft Office Suite, • AutoCAD and BlueBeam, • Revit experience preferredAdditional Details:, • 401(k) plan with company match, • Competitive paid time off (PTO), • Flextime Fridays for improved work-life balance, • Comprehensive health insurance coverage with 100% of premiums paid by the company, • Biannual performance bonuses to reward outstanding contributions, • Education reimbursement, • Relocation allowance may be provided if necessary

Job Description Who is Action Target? Action Target has the creativity and drive to develop innovative new firearms training technology, the experience to properly apply that technology to solve today’s training problems, and the dedication to provide the best ongoing service and support in the industry! What is in it for you? • A pretty cool industry where you will get to work with and interact with some very unique and cool customers., • Competitive wages- We look at the market to make sure we are paying our employees what they are worth!, • A chance to grow in a positive working environment with an outstanding team and make a difference This position will provide engineering expertise to the organization in its efforts to and carry out sustainment of current products and support in the development of new range products and equipment. Activities may include research of new technologies/alternative methods, conceptual design, detail & design drafting, product development, project management, construction, fatigue and stress analysis, test plans, on-site testing, commissioning of product installation and general technical product support. Some of your day-to-day tasks? • Develop new products and product enhancements based on market needs, best practices, and new technologies, • Utilize New Product Development (NPD) milestone process for management, tracking and reporting for project status, • Provide supporting calculations and specifications necessary for the development of designs, • Complete detailed designs and specifications, including 3D modeling, drawing creation, DFMEA development and document control, • Working effectively in a team environment interacting with customer, suppliers, product line managers, sales, range design and peer engineers, • Develop and execute new product test plans in the lab, factory, and on-sites, • Calculate and analyze test results, prepare detailed reports, recommendations, and conclusions, • Assist in the preparation of technical details for sales inquiries, technical literature, and operations literature, • Conduct risk assessments of product and equipment designs, • Participate in the continuous improvement and upgrades of current products, • Prepare detailed evaluation reports, cost estimates and recommendations on the specification and design of new or improved products, equipment or processes as required., • Develop, manage, and complete projects against fixed timelines and budgets, • BS Mechanical Engineering or equivalent, • 2-4 yrs. engineering experience in industrial and/or consumer product design required, • 3D modeling and drawing experience using Creo/ProE, • Understanding of drawing standards, stack up tolerances, and revision control, • Conceptual design capabilities, • Understanding of static and dynamic systems, • Understanding of materials, mechanical and electrical properties, surface treatment, welding, bending, etc., • Understanding of mechanical fatigue and stress analyses., • Engineering project management experience

Job Description Company Overview: Unicity was founded with a bold mission to make healthy living a reality in an on-the-go world. Unicity's business model is person to person sales which has given a personal touch to our sales and growth. This position would be Hybrid in either Las Vegas, NV, Provo, UT, or Fort. Lauderdale, FL. Unicity is dedicated to developing innovative, science-based products and programs that promote metabolic health and improve the quality of life for people everywhere. For over 30 years, Unicity has been dedicated to developing high-quality products that contain the vital nutrients your body needs. With the proper process, cutting-edge technology, and a mission to Make Life Better, Unicity is paving the way for a better tomorrow. In addition to competitive pay we can offer: -Heath, Dental, Vision, Life and other benefits that begin within a month -Paid Parental Leave -Generous vacation allowance in addition to company paid holidays -401(k) with company match -Substantial company product allowance -Reimbursement for internet, cell phone and gym/wellness activities The ideal Sr. Full Stack Engineer (frontend-heavy) will be: -A self starter who has an attention to detail -Able to take ownership of tasks, seeing them from start to finish -Able to work with minimal supervision -Able to write clean, concise code -Able to write unit tests -Able to troubleshoot and solve complex problems -Able to recommend and implement cloud-based solutions that will improve the stability and performance of our internal infrastructure -Proactive in identifying problems and have a willingness to fix them -Proactive in measuring the overall effectiveness of our systems and identify areas of improvement -Able to work with a variety of technologies -Able to design/architect systems that can be easily monitored -Able to work with others in a fast paced environment -Able to finish tasks on-time Key Areas of Responsibility: -Be involved and participate in the overall lifecycle of projects. -Help define and communicate technical and design requirements. -Design and implement high-quality solutions that will add business value. -Follow coding standards and guidelines. -Troubleshoot, debug, and test solutions. -Be accessible in the event of an emergency (when needed). -Provide training, help, and support to other team members. -Implement security and data protections. -Optimize code for maximum speed, scalability, and flexibility. -Stay up to date with current best practices, as well with new and emerging technologies. -Attend and participate in meetings and Agile ceremonies. -Collaborate closely with UX/UI designers to translate mockups into pixel-perfect, interactive experiences -Ensure cross-browser compatibility and mobile responsiveness across all supported devices Integrate third-party services such as payment gateways, analytics, and marketing tools -Conduct code reviews with emphasis on frontend best practices and performance optimization -Build and maintain reusable component libraries and design systems Requirements / Preferred Skills: -5+ years working as a Full Stack Engineer in an Agile product team environment. -5+ years developing TypeScript/JavaScript. -5+ years in a modern JavaScript framework, like React/Next.js, Svelte/SvelteKit, Angular, Vue/Nuxt, etc. -5+ years of experience integrating payments/ecommerce. -3+ years of experience with Content Management Systems (CMSss) -Candidate should have a strong passion for AI, ML, big data, etc. and how these technologies can make them more efficient programmers. -Bachelor's degree in computer science, information technology, or a relevant field preferred. -Strong passion for software development, demonstrated through engagement in extracurricular activities such as personal projects, open-source contributions, and the maintenance of public GitHub repositories. -Constantly learns the latest technologies and has a desire to continue to learn. -Advanced CSS/SCSS expertise and responsive design -Experience with TailwindCSS or interest in learning. -Experience with Shadcn or interest in learning. -Experience with React Hook Form (or other form libraries). -Experience with Zustand, Redux (or other state management libraries). -Experience with Performance optimization (Core Web Vitals, lazy loading, code splitting) -Experience with Accessibility (WCAG 2.1 AA compliance) -Solid understanding of API architecture and design concepts, including how to write/test microservices. -Strong proficiency with REST APIs and web sockets. -Experience with domain driven development, CQRS, and event sourcing. -Experience with access management. -Experience working with customer data and search. -Experience working with pay-in and pay-out information. -Experience with subscription based auto-shipped orders. -Strong proficiency with Docker and Kubernetes. -Strong proficiency with relational databases (e.g. SQL Server and PostgreSQL) and document databases (e.g. MongoDB). -Experience with continuous integration and continuous deployment pipelines (e.g. Travis-CI and GitHub Actions). -Experience with API development tools (e.g. Git and Postman). -Experience with application monitoring tools (e.g. DataDog, Prometheus, AWS CloudWatch, and Grafana). -Experience with analytic tools (e.g. Google Analytics, MixPanel) -Strong analytical and problem-solving skills. -Willingness to travel from time to time. If you’re interested in an organization where you can have a large impact, be a key part of driving core initiatives forward, and carve out the scope of your own role, we’d love to talk to you

Job DescriptionSalary: We are on the lookout for individuals who thrive in the collaborative spirit of engineering, where their efforts are appreciated, and excellence is recognized. Join our dynamic team where you can play a crucial role in creating a meaningful and long-lasting influence on the communities we serve. Apply now for our Bridge Engineer opportunity based in our Provo, Utah office. This opportunity is also available for thosewho live close to any of our office locations. Job Summary: The Bridge Engineer works with a team of engineers , CAD technicians, and Interns to work on a wide variety of state, city, and privately funded projects throughout the northwest in a range of markets. They design and create specifications and construction drawings for all types of single-span and multi-span bridges. Other projects may include load rating existing and new bridges using AASTHOWare Brr, bridge inspection, and various other bridge related projects. Duties/Responsibilities: • Detailing and design of steel, concrete, bridges, • Develop plans and specifications, • Prepare Preliminary Engineering Reports, Concept, and Type Size Location Reports, • Provide support for project bidding and construction administration, • Actively participate in business development, lead generation, and contribute to proposals, presentations, and other marketing documents, • Perform other duties as assigned Required Skills/Abilities: • Bachelors degree in in civil engineering or related field with 8+ years in structural engineering design, • Working knowledge of common bridge engineering software such as PGSuper, PSBeam, AASTHOWare Bridge Rating Software, and other bridge design software, • Knowledge of Microstation, OpenRoads Designer, AutoCAD, • Knowledge of concrete super and substructures, knowledge of GRS-IBS type abutments, • Bidding and construction administration, • Construction observation, • Strong communication and personal skills, • Successful project delivery Education and Experience: • Bachelors degree in Civil Engineering or related field, • Five or more years of relevant professional experience, • Current Professional Engineer licensure in Utah, and/or Idaho and Oregon or ability to obtain licensure within two years of hire Benefits: • Employee medical, dental, and vision insurance for employees and dependents, • Short-term and long-term disability insurance, • Company paid life insurance with option to buy up, • Salary Advantage Program, • Employee assistance program (EAP), • Flexible spending account (FSA), • Health savings account (HSA), • 401k match program & access to asset management services, • Year-end bonus, • Costco membership, • Paid time off (PTO) and PTO sell back program, • Paid Holidays, • Parental Leave, • Tuition Reimbursement, • Paid day of community service We are a mid-sized consulting firm providing water, wastewater, civil, transportation, and structural engineering services throughout the West including Oregon, Washington, Idaho, Nevada, and Utah. We provide client-focused solutions in surface water, water and wastewater engineering, as well as transportation planning, roadway, bridges and vertical structures, site civil design, construction management, electrical, controls, and surveying. Our clients include federal, state, and local agencies as well as small and medium sized cities. Our work is never boring and always influences the communities we serve. We take joy in everything we do from work to play our staff finds ways to be more human and balanced. Please review the Voluntary Self-Identification of Disability form foundhere to answer the questions provided at the bottom of the application process. Keller Associates, Inc. is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job DescriptionSalary: We are on the lookout for individuals who thrive in the collaborative spirit of engineering, where their efforts are appreciated, and excellence is recognized. Join our dynamic team where you can play a crucial role in creating a meaningful and long-lasting influence on the communities we serve. Apply now for our Transportation Project Manager / Project Engineer (PE) opportunity based in our Provo, Utah office. This opportunity is also available for thosewho live close to any of our office locations. Job Summary: The Transportation Project Manager / Project Engineer (PE) will work closely with other engineers, technical specialists, and clients to successfully deliver innovative solutions for complex transportation infrastructure challenges. This is an exciting growth opportunity for a motivated person ready to take the next step in their career and contribute to our growing operations. Duties/Responsibilities: • Using local or AASHTO standards, oversee horizontal and vertical alignment, roadway sections, intersection layout and sight distance determination, interchange layout, utility plans, traffic control plans, signing and striping, roadway drainage including hydraulic reports, and right-of-way plans, • Conduct planning studies, modeling, and hydraulic calculations, • Develop plans and specifications, • Prepare Preliminary Engineering Reports, • Provide support for project bidding and construction administration, • Mentor junior-level staff, • Actively participate in business development, lead generation, and contribute to proposals, presentations, and other marketing documents, • Perform other duties as assigned Required Skills/Abilities: • Excellent project management skills and superb attention to detail, • Ability to support contract negotiation and execution, • Comfortable developing project fees and estimates, • Demonstrated success managing aggressive project schedules, • Able to prioritize multiple projects and deadlines, • Capable of working as part of a team or independently, • Ability to work successfully with experts in multiple disciplines with a range of approaches, • Proficient with applicable software such as Microsoft Office, Microsoft Project, BlueBeam, ArcGIS, AutoCAD, Microstation or other design software as appropriate and have the ability to participate in design and plan development Education and Experience: • Bachelors degree in Civil Engineering or related field, • Five or more years of relevant professional experience, • Current Professional Engineer licensure in Nevada, Oregon, and/or Idaho or ability to obtain licensure within six months of hire Benefits: • Employee medical, dental, and vision insurance for employees and dependents, • Short-term and long-term disability insurance, • Company paid life insurance with option to buy up, • Salary Advantage Program, • Employee assistance program (EAP), • Flexible spending account (FSA), • Health savings account (HSA), • 401k match program & access to asset management services, • Year-end bonus, • Costco membership, • Paid time off (PTO) and PTO sell back program, • Paid Holidays, • Parental Leave, • Tuition Reimbursement, • Paid day of community service We are a mid-sized consulting firm providing water, wastewater, civil, transportation, and structural engineering services throughout the West including Oregon, Washington, Idaho, Nevada, and Utah. We provide client-focused solutions in surface water, water and wastewater engineering, as well as transportation planning, roadway, bridges and vertical structures, site civil design, construction management, electrical, controls, and surveying. Our clients include federal, state, and local agencies as well as small and medium sized cities. Our work is never boring and always influences the communities we serve. We take joy in everything we do from work to play our staff finds ways to be more human and balanced. Please review the Voluntary Self-Identification of Disability form foundhere to answer the questions provided at the bottom of the application process. Keller Associates, Inc. is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job DescriptionSalary: $18 to $20/hr Elkington Motors Mechanical & Electrical Engineering Internships (Part-Time) Provo, UT Elkington Motors invites students to apply for part-time engineering internships. Whether youre a freshman eager to learn or a senior ready to lead, youll contribute to real electric-vehicle builds in a fast, collaborative environment. Available Positions • Mechanical Engineering Intern, • Electrical Engineering Intern Job Title Engineering Intern (Part-Time) Job Summary As an engineering intern, youll work alongside experienced engineers to design, prototype, assemble, and test systems for electric vehicles. The role is designed to balance academic commitments while giving you hands-on, end-to-end exposure to EV development. What Youll Work On • Chassis: frames, suspension, wheels, brakes, • Electric Powertrain: motors, inverters, electronics, sensors, axles, • Parts documentation & ordering, • Inventory organization & allocation, • CAD drawings for parts & assemblies, • Shop maintenance & organization Mechanical Engineering • Create and update CAD models and detailed drawings; maintain revision control., • Design brackets, mounts, chassis components, and packaging solutions., • Support DFM/DFA, basic GD&T, and tolerance stack-ups; assist with fixture/jig design., • Fabricate and assemble prototypes; conduct fitment checks and functional testing., • Assist with HV/LV power distribution design (contactors, fusing, DC-DC, grounding)., • Support BMS integration, harness routing, and pack layout., • Develop/maintain wiring diagrams and harness drawings; support CAN integration and sensor selection., • Help bring up inverters/motor controllers; perform diagnostics and system testing., • Hands-on shop work (battery sub-assemblies, harness prep, light fabrication)., • Rotate across projects for broad EV exposure., • Academic Standing: FreshmanSenior (or recent grad) in Mechanical or Electrical Engineering (or closely related)., • Skills:, • ME: CAD proficiency (e.g., SolidWorks/Fusion 360); basic mechanical analysis., • EE: Basic circuit fundamentals; ability to read schematics; familiarity with wiring practices., • ME: GD&T familiarity, exposure to FEA, shop skills (CNC, mill/lathe, composites, welding)., • EE: CAN tools, harness design (Autosport/DTP), KiCad/Altium exposure, BMS/motor controller experience., • Test/validation, data acquisition, MATLAB/Python basics., • Pay: $18 to $20/hour, • Hours: Minimum 15 hrs/week (flexible around classes); additional hours may be available based on performance and project needs., • Deep hands-on experience across chassis, powertrain, and battery systems, • Mentorship from experienced engineers and builders, • Opportunities for future advancement at Elkington Motors

Job Description Who is Action Target? Action Target has the creativity and drive to develop innovative new firearms training technology, the experience to properly apply that technology to solve today’s training problems, and the dedication to provide the best ongoing service and support in the industry! What’s in it for you? • Committed to Safety- We take pride in sending you home healthy every day! 1.7 million-man hours without a lost time incident…and counting., • Be a Contributor- We want you to be a member of our team and not just an employee. We want to hear your ideas on how we can improve!, • Learn and Grow- Through our Lean culture, we are continuously improving our processes and our employees. We want to invest in your development to get you to the next level of your career while you help us succeed!, • Outstanding Benefits-We offer benefits to fit everyone’s budget! All full-time employees have access to Health Benefits, Tuition Reimbursement, PTO, and Paid Holidays. We are seeking a dynamic and versatile individual to join our team in a hybrid role that combines the responsibilities of a Manufacturing Engineer and Quality Engineer on our Second shift. This position plays a critical role in driving efficiency, maintaining product quality, and leading the evening production team. The ideal candidate is hands-on, detail-oriented, and capable of making real-time decisions to support smooth operations during off-peak hours. Shift Details: • Second Shift Schedule: Monday–Thursday, 12:00 PM – 10:00 PM] Manufacturing Engineering (60%) • Design and improve manufacturing processes, work cells, and line flow for efficiency., • Monitor swing shift operations to identify bottlenecks or waste and drive process improvements., • Implement Lean/6S initiatives to reduce downtime and improve productivity., • Ensure products manufactured during swing shift meet quality standards and specifications., • Conduct in-shift inspections, audits, and quality verifications., • Lead root cause investigations and corrective actions for any swing shift quality issues., • Bachelor’s degree in mechanical, Industrial, or Manufacturing Engineering, or equivalent experience., • 3+ years of combined experience in manufacturing, quality control, or production leadership., • Previous experience working a swing shift or in a 2nd shift leadership role preferred., • Strong understanding of Lean Manufacturing, quality systems, and process improvement methods., • Effective communication and leadership skills, especially during off-hour shifts., • Certifications: Lean Six Sigma, CQE, or similar., • Experience with machining, assembly, or fabrication environments., • Primarily based on the production floor during swing shift hours., • Exposure to manufacturing equipment, noise, and shop activity., • Must be able to stand, walk, and lift up to 40 lbs during shift hours.

Job Description Principal .NET Engineer – PredictIt As a Principal .NET Engineer for PredictIt, you will play a key leadership role in shaping the architecture, performance, and reliability of our high-scale trading systems. This is a hands-on position with a balance of technical leadership and individual contribution: approximately 30% architecture and system design, 30% code reviews and mentorship, and 30% hands-on development. You will work across the tech stack—from redesigning our financial engine and real-time trading infrastructure to guiding the delivery of secure and compliant user-facing applications. You’ll also help build the next generation of CFTC-compliant Designated Contract Market (DCM) and Designated Clearing Organization (DCO) systems, supporting millions of dollars in financial transactions. Key Responsibilities • Lead the architecture and design of mission-critical software systems, with a focus on performance, scalability, and fault tolerance., • Conduct in-depth code reviews that go beyond identifying bugs, ensuring maintainability, security, and long-term design integrity., • Set and uphold the gold standard for code quality, performance, and engineering discipline across the team through your own code and feedback practices., • Mentor developers through educational and constructive reviews, helping them grow in technical depth and align with best practices., • Evaluate how code will perform under load and scale with usage over time; recommend architectural improvements based on these insights., • Drive the adoption of consistent coding standards, reusable patterns, and system-wide architectural guidelines., • Build and enhance backend systems and APIs, including core trading logic and market data pipelines., • Collaborate closely with engineering, product, compliance, and QA teams to deliver scalable and maintainable solutions., • Analyze system limitations and performance issues; lead efforts in profiling, capacity planning, and performance optimization., • Champion performance engineering, DevOps best practices, and continuous delivery workflows., • Identify opportunities to streamline and scale code review processes across distributed and asynchronous teams, including tooling and automation., • 6+ years of experience designing and developing enterprise-grade applications with the .NET stack., • Deep understanding of C#, ASP.NET (MVC and Web API), OOP, and multi-tiered system architecture., • Demonstrated expertise in designing performant, scalable systems, ideally in high-transaction or trading environments., • Proven leadership in code review culture, including mentoring developers, designing team-wide coding standards, and reviewing high-impact or high-risk code across multiple domains., • Experience using code reviews as a core leadership function, not just a task, ensuring long-term system integrity, team growth, and knowledge sharing., • Familiarity with or contributions to automated review tooling, static analyzers, or quality enforcement pipelines., • Experience conducting reviews for regulated, financial, or mission-critical systems with a high bar for security and compliance., • Strong experience with SQL Server and proficiency in debugging and optimizing queries and data pipelines., • Solid understanding of CI/CD workflows, Azure DevOps, and cloud-based architecture (Azure preferred)., • Ability to lead by example with clear, empathetic communication and deep technical insight., • Bachelor’s degree in Computer Science or a related field. Technology Stack Languages & Frameworks: C#, ASP.NET (MVC, Web API, Web Forms), Entity Framework, LINQ, T4 Front-End: HTML5, Bootstrap, jQuery, Vue.js Database & Messaging: SQL Server, Redis, Kafka Tools & Platforms: Azure DevOps, Azure Cloud Services, Visual Studio 2022, SSRS Nice-to-Have • Experience with financial systems, including order matching and FIX protocol integration., • Background in gamification or engagement-driven application design. All positions are Full-Time, with competitive compensation, medical benefits, paid vacation, 401k plan and stock options. Casual dress code and a non-corporate atmosphere make this a fun place to work and learn in a team environment. Please visit our website at aristotle.com

Job Description Job Summary: Design, assemble, program, and test control systems by wiring, laying out, and assembling control panels, control boards, and other electromechanical elements. The engineer will work with other electrical engineers, mechanical engineers, programmers, and technicians from a variety of backgrounds. The engineer is expected to take the lead as assigned and to work within multi-functional teams, help establish requirements, document the project, and transition projects into the hands of the internal customers. Troubleshooting of the various equipment elements (hardware and software) will be a part of the process. This is expected to be a hands-on position with time split between design, build, and operation. The equipment built will be used by Moxtek Production (internal customer). This is a non-remote position which requires the applicant to work on-site. Essential Functions: • Design and generate schematics/electrical wiring diagrams for industrial control panels., • Build and assemble industrial control panels-mount hardware, wire, label, etc., • Program PLCs used in automated testing and manufacturing equipment., • Read and interpret specification documents for electrical components and drawings for mechanical layouts., • Troubleshoot/debug and test industrial control panels, whether their own design or those designed by someone else., • Document the completion of various elements in the equipment assembly process for others to follow and reference for years in the future., • Operate basic electrical and mechanical tools (grinders, drills, saws, soldering irons, microscopes, files, multi-meters, etc.)., • Report and generate documents as needed for drawings, bill of materials, and manuals., • Work with custom PCBs, assembling and testing them as needed., • Basic soldering of wires and connectors. Board level soldering such as through-hole and surface mount, will be taught as required. Management Responsibilities: • No direct reports., • Project leadership as assigned within the equipment development team. Education and Experience: • Four-year degree in mechanical or mechatronics engineering, • On-the-job or personal project experience doing similar/related tasks Highly Preferred Skills: To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position. • Experience with 3D modeling software, creating part models and complex assemblies, preferably using SolidWorks 2021 or newer., • Experience designing schematics using SolidWorks Electrical., • Experience managing source code in source repositories, preferably Subversion., • Experience with Beckhoff PLCs., • Experience programming PLCs using Structured Text., • Experience with 6 Axis Robots (Example: Epson, Mecademic or Fanuc, etc.), • Experience with COGNEX Vision Systems or equivalent. Job Posted by ApplicantPro

Job DescriptionElectrical Engineer We are a pioneer in the Home Innovations sector, having been established more than ten years ago. Our product line has expanded to include other patented, simple-to-install home improvement items, including motion sensor lights, emergency backup lighting, smart device docks, integrated outlet safety covers, child safety locks, retrofitted interior door locks, and more, after we first introduced the world to LED cover plates more than ten years ago. Position Overview We are seeking a skilled Electrical Engineer to design, develop, and test electrical systems and components. The ideal candidate will have a strong understanding of both analog and digital electronics, as well as experience with hardware design and compliance with regulatory standards such as NEC, FCC, and UL. Key Responsibilities • Design and develop electrical circuits and systems, • Conduct testing and validation of prototypes and products, • Ensure compliance with NEC, FCC, and UL standards, • Collaborate with cross-functional teams to integrate electrical components into larger systems, • Troubleshoot and resolve electrical issues in existing products, • Prepare technical documentation and reports for project stakeholders, • Bachelor's degree in Electrical Engineering or a related field, • Proven experience as an Electrical Engineer, • Strong knowledge of analog and digital electronics, • Familiarity with hardware design processes, • Experience with NEC, FCC, and UL compliance, • Excellent problem-solving and analytical skills • Medical, • Dental, • Vision, • PTO ...and more! • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 07/15/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Mine Engineer Central Utah Must have experience in Coal. Are you a skilled Mining Engineer ready to lead in one of Utah’s most established mining operations? Our client, a highly stable organization with over 1,000 employees across multiple sites, is searching for a Mining Engineer to join their team in Central Utah. Why Join Us? Competitive Pay: Reflective of your skills and experience. Comprehensive Benefits: Medical, dental, vision, Rx, 401(k) with company match, and life insurance. Bonuses & Time Off: Production bonuses, paid holidays, and vacations. Overall Purpose: Assist the Engineering department to provide various engineering support activities. Responsibilities: Proficient understanding of engineering principles (soil/rock mechanics, steel design, hydraulics/pump networks, ventilation, conveyors, electricity, economics) Excellent computer skills (AutoCAD, Excel, Word, PowerPoint) Strong communication and interpersonal skills Education & Experience: Bachelor's Degree in Engineering (Mining/Civil/Mechanical) or equivalent experience Engineer in Training (EIT) Professional Engineering License (PE) Experience in underground continuous and longwall mining methods Experience in project management Must come out of Coal. Reports to: Engineering Manager Apply Today! Are you ready to advance your career in a role that makes a difference? Apply now and be part of a company that values innovation and stability. Post-offer drug and physical screening required. Company DescriptionWork for the worldwide leader in mining services.Work for the worldwide leader in mining services.

Job Description Hi, We Are Novarad Novarad's solutions help healthcare executives, clinicians and IT professionals deliver clinical, operational, and fiscal excellence. With a self-sustaining business model, more than three decades of technology leadership, and an intense focus on our customers’ needs, Novarad brings people and technology together in ways no one else can. We’re driven by innovation that truly transforms healthcare - for the provider and their patient. We need a skilled professional to help us to build our automation team! The Software Development Engineer in Test (SDET) works as a member of the Software Engineering & QA team to test all Novarad software. They develop and execute automated tests based on software requirements and perform validation and verification activities to ensure product quality. They create frameworks and tools to run and report on test automation results. Your Benefits (We know you’re always scrolling to the bottom for these, so here you go!) • Competitive salary with generous PTO, • Health, dental, vision, life, and disability insurances, • HSA option with dollar-for-dollar match, • 401k with dollar-for-dollar match, • Wellness program, • Employee Care Program (Ask us about this! You will love it!), • Sundance corporate passes · Create new automated tests and maintain existing automated tests based on software requirements · Execute automated Acceptance, Regression, Functional, System, and Performance tests · Review automated test results and identify trouble areas and bugs · Provide recommendations for continuous improvement for assigned applications · Maintain/develop test frameworks · Conduct compatibility tests with software, hardware, operating systems, networks and other types of environments · Report detailed software defects, including awesome technical descriptions and repro steps · Identify and propose areas for potential improvement in the QA process, including researching and recommending new and better tools · Drive effective communication across the organization · Participate in company and technical trainings · Accomplish all job functions with professionalism and a positive outlook Requirements What you will bring- Knowledge and Experience • Bachelor’s degree or equivalent work experience, • 2 - 5 years of experience developing and testing software, • Experience in one or more Test Automation Frameworks, • Demonstrated ability to own, design, lead and implement test strategies for complex applications, • Experience with SQL, PostgreSQL, Oracle, etc., • Experience with test management software, such as Microsoft Test Manager (MTM) or JIRA., • The ability to work closely with the technical project lead to meet project objectives and timelines, • Knowledge of best practices in full life cycle of software development activities, • Effective communication skills, • Strong analytical and problem-solving skills, • Strong knowledge of C#., • Experience working in an Agile/Scrum development process., • Experience in a professional medical environment., • Must be passionate about software development, • Must have a desire to continually learn new technologies, • Must be a team player and enjoy working with others, • Good verbal and written communication skills, • Willingness to speak up when things don’t look right, • 40 plus hours/week Company DescriptionNovarad, a leader in healthcare IT and imaging solutions is home to a rich culture of innovation, evident in our constantly evolving product lines, currently AI and AR focused. Our products and solutions transform healthcare -- for providers and their patients. If you want to work for a company that really makes a difference, this is the place.Novarad, a leader in healthcare IT and imaging solutions is home to a rich culture of innovation, evident in our constantly evolving product lines, currently AI and AR focused. Our products and solutions transform healthcare -- for providers and their patients. If you want to work for a company that really makes a difference, this is the place.

Job DescriptionSalary: We are on the lookout for individuals who thrive in the collaborative spirit of engineering, where their efforts are appreciated, and excellence is recognized. Join our dynamic team where you can play a crucial role in creating a meaningful and long-lasting influence on the communities we serve. We are seeking a professional engineer with 5+ years of experience in the public market, technical experience in water, wastewater, stormwater, and related experience in public works planning, design, and construction management. If thats you, apply now for our Water/Wastewater Project Manager/Project Engineer opportunity based in our Provo, Utah office. This opportunity is also available for thosewho live close to any of our office locations. Job Summary: The Water/Wastewater Project Manager/Project Engineer will work closely with other engineers, technical specialists, and clients to successfully deliver innovative solutions for our clients challenges. This is an exciting growth opportunity for a motivated person ready to take the next step in their career and contribute to our growing operations. Required Skills/Abilities: • Excellent project management skills and superb attention to detail, • Ability to support contract negotiation and execution, • Comfortable developing project fees and estimates, • Demonstrated success managing aggressive project schedules, • Able to prioritize multiple projects and deadlines, • Capable of working as part of a team or independently, • Ability to work successfully with experts in multiple disciplines with a range of approaches, • Proficient with applicable software such as Microsoft Office, Microsoft Project, BlueBeam, ArcGIS, AutoCAD, and other modeling software, • Perform other duties as assigned Education and Experience: • Bachelors degree in Civil Engineering or related field, • Five or more years of relevant professional experience, • Current Professional Engineer licensure in Utah, Nevada, Oregon, and/or Idaho or ability to obtain licensure within six months of hire Benefits: • Employee medical, dental, and vision insurance for employees and dependents, • Short-term and long-term disability insurance, • Company paid life insurance with option to buy up, • Salary Advantage Program, • Employee assistance program (EAP), • Flexible spending account (FSA), • Health savings account (HSA), • 401k match program & access to asset management services, • Year-end bonus, • Costco membership, • Paid time off (PTO) and PTO sell back program, • Paid Holidays, • Parental Leave, • Tuition Reimbursement, • Paid day of community service We are a mid-sized consulting firm providing water, wastewater, civil, transportation, and structural engineering services throughout the West including Oregon, Washington, Idaho, Nevada, and Utah. We provide client-focused solutions in surface water, water and wastewater engineering, as well as transportation planning, roadway, bridges and vertical structures, site civil design, construction management, electrical, controls, and surveying. Our clients include federal, state, and local agencies as well as small and medium sized cities. Our work is never boring and always influences the communities we serve. We take joy in everything we do from work to play our staff finds ways to be more human and balanced. Please review the Voluntary Self-Identification of Disability form foundhere to answer the questions provided at the bottom of the application process. Keller Associates, Inc. is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Join Moxtek as a full-time X-ray Tube Mechanical Engineer and propel your engineering career in a dynamic and collaborative environment. Located in Orem, UT, this onsite role offers you the chance to engage directly with innovative projects and cutting-edge technology. You'll be part of a high-performance company culture that prioritizes excellence and innovation. Work closely with experienced professionals who value your problem-solving skills and customer-centric approach, ensuring you contribute meaningfully to our mission. With a competitive salary ranging from $60,000 to $80,000 per year (DOE) plus profit sharing, you'll be rewarded for your hard work and dedication. As a team member you'll be able to enjoy benefits such as medical, dental, vision, and life insurance; a generous 401(k) match; Health Savings Account, paid time off, and 11 paid company holidays. Come grow your skills while making a difference in the manufacturing industry. Apply today to join a team that values your contributions! Make a difference as an X-ray Tube Mechanical Engineer As an X-ray Tube Mechanical Engineer at Moxtek, you'll have the opportunity to design and develop innovative new X-ray products using advanced 3D modeling, simulation, and hands-on experimentation. You will conduct in-depth research on high-voltage fields as they relate to high-vacuum devices and high-voltage power supplies, ensuring that our products remain at the forefront of technology. You will also collaborate with a dedicated team to develop predictive models that assess the performance and reliability of our X-ray devices, contributing to cutting-edge solutions for our global customers. This role places you at the heart of innovation, allowing you to apply your engineering skills in impactful ways. Are you the X-ray Tube Mechanical Engineer we're looking for? To thrive as an X-ray Tube Mechanical Engineer at Moxtek, you will need a strong foundation in engineering principles combined with hands-on experience in relevant software and tools. Proficiency in CAD software, particularly SolidWorks, is essential for designing and modeling complex components. Familiarity with CAE tools like ANSYS and CST for simulation purposes will enhance your ability to conduct research on high-voltage fields and evaluate performance. Strong mechanical aptitude, coupled with exceptional organizational skills, will enable you to manage projects effectively. Self-motivation is key, as you will often work independently to develop predictive models and conduct experiments. Additionally, excellent communication and technical report writing skills are crucial for conveying your findings and collaborating with team members. Embrace the challenge and bring your innovative mind to Moxtek! Knowledge and skills required for the position are: • CAD (SolidWorks preferred), • CAE (ANSYS,CST and other simulation tools), • Statistical Analysis, • Mechanical Aptitude, • Self-motivated, • Organized, • Technical Report Writing Job Posted by ApplicantPro

Job DescriptionSalary: 20.00 US Synthetic has an immediate need for a Student Engineer located in Orem, UT. The Student Engineer will assist Process Engineer/Specialist with all aspects of assigned process and related machines. Perform audits and trainings and use Lean methods to promote continuous improvement. Whats in it For You: • The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best, • Thrive in a company that values sustainability, drives a safety-focused culture, and empowers its employees through continuous improvement, • Comprehensive benefits package starting day 1 of employment medical, dental, vision, matching 401k, and more! What You Will Do: • Assist Engineer/Specialist with all aspects of assigned process and related machines, • Troubleshooting, • Assist production operators with machine malfunctions; assist maintenance when needed, • Assist production floor with quality improvements, • Own and be a part of PDCAs for the process, • Learn and apply Six Sigma principles, • Create, audit and maintain standard works operators to use for training on process, i.e. Critical Knowledge and Job Breakdown Sheets, • Run and train others in process meetings, • Work a flexible schedule based around school schedule, • Follow all company policies (Attendance, No Tobacco Products on Campus, Illegal Drug & Alcohol, Family Medical Leave Act, Personal Appearance, Personal Electronic Devices, Vacation & Personal Time, etc.) Minimum Qualifications: • High school diploma/GED is required, • Immigration sponsorship not available for this role, • Must have been accepted to a bachelors engineering program at a university with intent to graduate Physical Demands: • Combination of sitting, standing and walking for eight or more hours, • Occasional repetitive motions, • Use of Safety Equipment (Safety glasses, Steel-toed boots) Preferred Qualifications: • Lean and Six Sigma knowledge, • Good interpersonal skills, • Ability to apply things learned at school, • Ability to teach and explain methods, standards, etc. to others (Job Instruction), • Ability to speak in front of crowds, • Team attitude, • Advanced computer skills, i.e. Microsoft Excel, Word, JMP, Pro-E, etc., • Some database knowledge, i.e. SQL, Statistics

Job Description MGC Contractors, Inc. is a 100% Employee Owned Corporation. We specialize in all forms of water and wastewater general contracting including Job Order Contracting, Construction Manager at Risk, Design-Bid-Build, and Design-Build throughout Arizona, Texas, Utah, and New Mexico. MGC Contractors, Inc is looking for Field Engineers to join our Utah Division in the Provo area. PRIMARY RESPONSIBILITIES AND DUTIES • General Contract and Subcontract administration, • Construction scheduling, • Procurement and expediting of material and equipment, • Mechanical, electrical and piping systems coordination, • Project cost review, reporting, updating, and accounting, • Review of subcontractor applications for payment, • Participation in project meetings, • Supervision/coordination of subcontractors field installations, • Review/negotiate change proposal pricing from subcontractors and prepare change proposals for self-performed work, • Research and suggest options on construction means, methods and equipment, • Develop and maintain effective relationships with owners, vendors, subcontractors., • This position operates in a professional office environment that routinely uses standard office equipment requiring the ability to communicate in person and over the telephone with other employees, the ability to interpret printed materials and a computer screen, the stamina to maintain attention to detail despite interruptions, the ability to lift and carry supplies and files weighing up to 10 pounds and to move about the inside of the office to access supplies, office machinery, etc., • High School Diploma or GED required., • Bachelor degree in Construction Management or related Program required., • Prior construction field experience preferred., • Proficient with Microsoft Office Suite (Word, Excel, Outlook) required. MGC Contractors is an equal employment opportunity employer and, as such, we consider individuals for employment according to their abilities and performance. Employment decisions are made without regard to age, race, religion, sex, national origin, physical or mental disability, genetic information or any other classification protected by law. All employment requirements mandated by state and federal regulations will be met. Discriminatory or harassing conduct in the workplace, whether committed by management or non-management employees or outside person (vendors, customers, etc.) is prohibited. This job description is not meant to encompass all tasks and or job responsibilities, but rather it is meant to provide the employee with a general summary of what the position entails. MGC Contractors has the right to amend or revise this job description at any time. Reasonable accommodations may be made when it does not impose an undue hardship on the company to do so. Passing a pre-employment background check and drug screen is required. Job Posted by ApplicantPro

Carry out minor repairs on the engine additionally to the planned service.

The Engineering Project Manager will provide engineering expertise and technical support throughout the project lifecycle and support field operations, customer account management, procurement, and key stakeholder groups within Quanta. This will include customer or jobsite visits as necessary during

Job Description Company Overview Unicity is dedicated to developing innovative, science-based products and programs that promote metabolic health and improve the quality of life for people everywhere. For over 30 years, Unicity has been dedicated to developing high-quality products that contain the vital nutrients your body needs. With the proper process, cutting-edge technology, and a mission to Make Life Better, Unicity is paving the way for a better tomorrow. Unicity was founded with a bold mission to make healthy living a reality in an on-the-go world. Unicity’s business model is person to person sales which has given a personal touch to our sales and growth. Unicity currently has offices in Utah, Nevada, Wyoming, plus many more globally! This job will be located in Provo, UT. The Role We’re looking for a Senior React Native Engineer to drive our mobile development efforts. You’ll be responsible for building scalable, high-performance applications while working closely with product, design, and backend. If you have experience with Node & NestJS on the backend, that’s a big plus! What You’ll Do * Own and develop new features for our React Native app, ensuring a smooth and delightful user experience. * Optimize performance and scalability to support a growing user base. * Work closely with designers and product managers to turn ideas into reality. * Maintain high engineering standards, including writing clean, maintainable code and automated tests. * Collaborate with the backend team (NestJS) to integrate APIs and improve overall system efficiency. * Participate in code reviews, architectural discussions, and mentoring junior developers. * Help shape our mobile tech strategy as we scale. What We’re Looking For * 4+ years of experience with React Native and deep knowledge of the mobile development lifecycle. * Strong proficiency in TypeScript and modern JavaScript (ES6+). * Experience working with React Navigation, Redux, and Expo. * Familiarity with native modules (Swift/Kotlin) and bridging when necessary. * Comfortable working with REST APIs. * Knowledge of mobile performance optimizations and debugging tools. * Bonus: Experience with NestJS, PostgreSQL, AWS, or Firebase. * Startup mindset: you thrive in a fast-paced environment, love shipping quickly, and take ownership of your work. Why Join Us? * Fast-moving, high-impact work—your code will be in users' hands quickly. * Ownership & growth—we believe in empowering our engineers to solve real problems. * Competitive salary—we reward great work. If you’re excited about building at speed and solving challenging mobile problems, we’d love to hear from you!

Relocation Assistance Provided Job Summary The Lead Application Support Engineer (SRE) - Salesforce is responsible for reliability, performance, and availability of applications and enhancements that support Marriott Vacations Worldwide (MVW).

Quality Engineer #25-950 Provo, Utah, United States Full-Time / Part-Time Full-Time Job Description. Creation and management of PMA Inspection Plans together with Engineering. Working in conjunction with Engineering.

Whether through research and development, technology innovation or solution engineering, our team members play vital roles in connecting consumers with the products and platforms of tomorrow. Bachelors degree in Engineering or a related field or 10+ years experience required.

Our ideal candidate will have a Bachelors in a technical / scientific discipline such as Manufacturing, Mechanical Engineering, Electrical Engineering, Physics, or similar technical degree or a combination of equivalent education and experience with at least 4 years of professional experience in a r

Support Project Managers and Engineers with engineering design tasks for various projects. Perform civil engineering design and associated calculations and interpret plans from other engineering-related disciplines. Civil Engineering - Engineer-In-Training.

Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field from an accredited university; a Master's degree in a similar field is a plus. You will collaborate with the design engineering teams to ensure new products are designed for testability and that all necessary equip

Bachelor's degree in Engineering, Architecture, Construction Management, Project Management or a related field. Engineer will join the Facility Group to manage, plan, direct, and coordinate facility project activities to ensure projects are accomplished within the approved scope, budget, and schedul

Geotechnical Engineer 7: Geo-Environmental Engineer. Master's degree in Civil Engineering with Geotechnical Engineering emphasis. Professional engineering (PE) license.

The Manufacturing Engineer will be responsible for process improvement through systemic problem solving, statistical analysis, Lean Six Sigma principles, and process optimization. Working knowledge of responsibilities and tasks performed by various engineering departments/disciplines (e. Working kno

Professional engineering (PE) license. Expert Knowledge of engineer principles of design. We are currently seeking an Environmental Engineer to support a wide variety of environmental projects.

Engineer will oversee facility projects of varying sizes and complexity, ranging from greenfield/new construction to major renovations and minor upgrades of existing facilities. Engineer independently performs most assignments and provides direction for the project team to achieve facility project o

Bachelor's degree in Electrical, Chemical or Mechanical Engineering, or in Engineering Technology or related discipline. Professional engineering (PE) license. Experience within an Engineering and/or an integration firm highly preferred.

Engineer will join the Facility Group to manage, plan, direct, and coordinate facility project activities to ensure projects are accomplished within the approved scope, budget, and schedule. This position requires the ability to manage projects from the conceptual engineering phase through construct

Certification as an Engineer in Training (EIT) or passing the Fundamentals of Engineering (FE) exam in states where an EIT is not obtainable (within 18 months of hire or promotion or transfer). Bachelor's degree in Electrical, Chemical or Mechanical Engineering, or in Engineering Technology or relat

A growing fire protection engineering consulting firm is looking for a Fire Protection Consultant to join its Salt Lake City office. Perform fire sprinkler and alarm system design, life safety code analysis, and performance-based fire engineering. Bachelor’s degree in Fire Protection, Mechanical,

Senior Professional Electrical Engineer. Bachelor's degree in Electrical or Electronic Engineering, or Electrical Technology or related discipline. Professional engineering (PE) license.

Professional Engineer - Drainage. As a Professional Engineer for Drainage, you will have the opportunity to be involved in large, multi-discipline projects while developing diverse skill sets. Work within a team of project managers, design engineers, technicians, and support staff to successfully co

Electrical Engineering (required).

Strong technical expertise in structural, civil, electrical, or mechanical engineering, with a comprehensive understanding of engineering principles and practices. The QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environme

Bachelor's degree in Electrical, Chemical or Mechanical Engineering, or in Engineering Technology or related discipline. CDM Smith is hiring Automation and Instrumentation & Controls Engineers! Are you interested in working on projects that are meaningful to you and society? Do you have experience i

Assess, develop, and implement process changes based on detailed engineering analysis. Develop, execute, and document engineering studies and associated technical reports. Bachelor's degree in Engineering (Manufacturing, Industrial, Chemical or Mechanical).

Professional engineering (PE) license. Strong foundation in electrical engineering design principles and project management methodologies. We are seeking a licensed Electrical Engineer (PE) with strong design expertise and project management experience to lead federal infrastructure, water/wastewate

The Bridge Engineer works with a team of engineers , CAD technicians, and Interns to work on a wide variety of state, city, and privately funded projects throughout the northwest in a range of markets. Bachelors degree in in civil engineering or related field with 8+ years in structural engineering

Solid knowledge of engineer principles of design. Sediment Remediation Engineer position. The candidate must have demonstrated expertise working with a team of engineers and scientists on sediment remediation projects for a variety of clients including those in the Federal and Public sector.