Trabajos forklift en Rockford, Illinois - Page 2Crear alertas

Job Description This position is responsible for ensuring accurate oversight of the raw materials used in the Steel Service Center as well as ensuring timely and accurate cuts, based on the Work Center Priority Report and other production information tools. Reprioritizes workload to accommodate hot and rush job requirements to support production on-time delivery metrics and throughput. Other responsibilities include ensuring a safe work environment within and around the Steel Service Center. Job Duties: • Runs and manages grids and daily reports including timecard audits, efficiency reports, and others as needed to ensure proper job time and standards management, • Manages and develops direct reports by providing training and development opportunities, delivering quarterly feedback and administering performance management guidance, as needed, • Oversees timely cycle counts and works with the Planners to ensure accurate counts are updated. Also contacts the Planning group when stock levels in ERP do not coincide with actual inventory on the shelves, • Creates and maintains work instructions for all processes in the SSC, • Supports continuous improvement and LEAN efforts, • Addresses defective tools and equipment, • Coordinates with maintenance and scheduling to establish PM schedules for machines, • Establishes and conducts stand-up meeting (weekly, biweekly) schedule, • Acts as a back-up for machines in the department including saws, flame-cut machine, laser machine and the nesting process. (Caldwell will provide training in these operator skills, if needed), • Demonstrates the Caldwell Values in all work activities., • Complies with and enforces all safety requirements. Minimum Education: • High school diploma or equivalent Minimum Work Experience: • Three years of supervisory or team lead experience in a manufacturing dept required, • Two years of exposure to equipment such as plasma, flame cut, laser, saw equipment, and/or press break equipment, etc. preferred, • One year forklift experience, • Strong verbal communication skills, • Proven ability to read and interpret blueprints, • Proven ability to read a tape measure, • Ability to use hand and measuring tools including calipers and micrometers While performing the duties of this job, the employee is frequently required to stand, walk and use repetitive hand/wrist motion, occasionally required to twist/turn, stoop/bend, squat, reach with hands and arm, use forearm rotation, and lift and carry up to 25 pounds. Vision corrected to near 20/20 required.

Job Description Job Duties: • Kits stock and/or sales order jobs from the work center priority list based on what is ready to be kitted and coming due., • Routes kitted jobs to their designated staging areas., • Routes kitted jobs to next operation based on the priority order the foremen assigns those jobs., • Picks up all green tagged parts and takes them to the next staging area whether for OPPNT, painted in-house, outside operation, etc., • Puts away stock or sales order parts that are not ready for kitting in the designated location. The location may be a temporary area in the Weld Warehouse., • Manufacturing receipts stock parts into inventory., • Maintains a clean and safe work environment. Reports defective tools and equipment., • Complies with all safety rules and regulations., • Demonstrates the Caldwell values in all work activities. Requirements: • High school diploma or equivalent, • Minimum one year forklift experience, • Minimum one year overhead crane experience, • Proven ability to read a tape measure, • Good verbal communication skills, • Ability to read and interpret blueprints Physical Requirements: Frequently required to stand, sit, walk and stoop; bend, kneel or crouch; talk or hear. Regularly required to lift or move up to 50 pounds. Must be able to see with corrected vision to nearly 20/20 or better and to differentiate colors.

Job DescriptionDescription: · Add appropriate labeling of shelves, parts, and bins. · Read production schedule, customer order, work order, shipping order, or requestion to assist with items to be moved, gathered, or distributed. · Receive incoming products, count, record, and label receipt of materials. · Visually inspect deliveries for missing, damaged or rusty parts. · Must report defective materials or questionable conditions to department supervisor. · Assist other departments as requested and maintain an organized work environment. · Assist inventory control in counting and organizing materials stored in various bin locations. · Prepare and maintain records of the amounts of materials or items received or distributed. · Retain an awareness of the work environment critical to task at hand to produce error free and damage free results. · Requires the ability to follow basic written and verbal instructions, such as bills of materials, material pick lists, shipping documents, or equivalent. · Must be able to handle, move and locate material as needed. · Ability to communicate with customers, other employees and supervisors using verbal and written skills effectively and professionally. · Ability to deal constructively with conflict and recognize potential problems. · Follow safety rules and keep the work area in a clean and orderly fashion. · Participates in and completes assigned training. · Interview, hire, and train new associates. · Supervise timely and accurate data entry for all services performed. · Document and discuss with employees any concerns with performance, attendance and behavior. · Balance time for each employee in the department. · Prepare and discuss employee annual performance reviews. · Operate and oversee the safe use of forklifts and other equipment. Requirements: · Requires 1 to 3 years in a yard/warehouse environment. · Must be able to work outdoors to unload trucks and move inventory as needed. · Operate forklift, computer, and scale. · Passionate about continuous improvement. · Must be willing to submit and pass pre-employment drug screening and background check. · Must be able to work overtime as required. · Ability to work in a fast-paced, deadline-oriented environment. · Ability to pay close attention to detail.

Job DescriptionDescription: • Responsible for both machine set up and operation of Bending Machine, • Changing tooling, computer skills, uploading jobs into machine interface, first piece inspection, troubleshooting, preventative maintenance, • Ability to read computerized blueprints and drawings, • Ability to perform precision forming, bending and folding, • Ability to use and read measuring equipment such as micrometers, calipers, protractor, and tape measure, • Must be able to add and subtract, • Able to bend on a variety of metals, galvanized, Steel, Aluminum and StainlessRequirements:Requirements, • Requires lifting and carrying up to 50lbs, • At least 1 years’ experience as a Bender/Press Brake Operator, • Ability to stand for duration of shift, • Experience operating Forklift and Overhead Cranes a plus., • Must keep a clean and safe working station, • Must be willing to submit and pass pre-employment drug screening and background check

Job Description Job Duties: • Oversees all kitting, MOVE and STAGE work centers on the work center priority report. Assigns work and re-prioritizes, as needed to meet schedule requirements., • Kits stock and/or sales order jobs from the work center priority list based on what is ready to be kitted., • Routes kitted jobs to their designated staging areas., • Routes kitted jobs to various departments based on the order at which the welding foreman puts those jobs., • Picks up all green tagged parts and takes them to the designated paint staging area (OSV paint or inside paint, as specified on the traveller., • Manufacturing receipts stock parts into inventory., • Maintains all work centers in the material handling department., • Manages all in/out boxes., • Demonstrates the Caldwell Company Values in all work activities., • Complies with all safety requirements and maintains a clean and clean and safe work environment. Reports defective tools and equipment., • Three years of material handling experience in a manufacturing setting., • One year of supervisory or team lead experience preferred, • Three years of forklift experience. • Proven ability to read and interpret blueprints., • Proven ability to read a tape measure., • Good verbal communication skills., • Ability to use a computer to locate parts, track jobs, and communicate. Physical Requirements: While performing the duties of this job, the employee is occasionally exposed to airborne particles or fumes. The noise level in the work environment can be loud. Must be able to tolerate seasonal hot and cold conditions.

Job DescriptionMaterial Handler: Loves Park, ILOur client in Loves Park, Illinois is looking for a hard-working, energetic individual to join their team as a Material Handler. It is the Material Handler’s responsibility to move and place material, packages, and other production items to ensure other personnel can stay on task throughout the production cycle. Responsibilities of the Material Handler: • Load and unload trucks, • Safely operate forklift truck (after trained and certified), • Pick, pull, and place product in storage, • Ensure production work stations have material, packaging, and other items as tasked, • Move product from work stations to next process step, • Must have reliable transportation, • Must have a high school diploma or equivalent, • Must have basic math and computer skills, • Must be able to lift up to 50lbs. occasionally, • Must be able to work hours assigned and occasional overtimePay for Material Handler: $14.50/hour based on experience.Material Handler Benefits:, • Paid weekly., • Direct deposit., • Health insurance., • Paid training.Type: 1st Shift, Full-timeSchedule: Monday - Friday from 5:30am - 4:00pm.Apply now!Are you ready to move from the worries of today to your dreams of tomorrow? If so, give Hughes a call. We are the top-rated staffing, recruiting, and HR experts in the region. We are headquartered in Freeport, IL and have 11 locations across Illinois, Wisconsin, and Minnesota. Where we have offices, we have connections to the best local jobs! Walk in our doors and you’ll find friendly professional staff who dig deep, get results, and most importantly have fun! The reviews speak for themselves, at Hughes we quickly hook you up with companies that offer competitive pay rates, great culture & benefits, and a chance to elevate your life. We offer health insurance and 401(k) too to all our employees. To get the ball rolling, visit us online and complete our application. We’ll be in touch soon!

Job DescriptionOverview Join our dynamic team in Machesney Park, IL, as a Crimping Machine Assembler! We are looking for a dedicated individual who is passionate about precision and quality in manufacturing. In this role, you will play a crucial part in the assembly of crimping machines that meet our high standards of performance and reliability. If you enjoy working with your hands and have a keen eye for detail, we want to hear from you! Responsibilities • Assemble crimping machines and subcomponents according to technical specifications and blueprints., • Install and assemble mechanical, electrical, and Hydraulic parts as required., • Perform crimping tool setup and calibration to ensure proper function, • Inspect assembled machines and components for quality and accuracy, • Conduct quality checks to ensure all components meet our stringent standards., • Collaborate with team members to optimize assembly processes and improve efficiency., • Maintain a clean and organized workspace to promote safety and productivity., • Troubleshoot and resolve any assembly issues that may arise during production., • Document assembly processes, modifications, and test results. Qualifications, • High school diploma or equivalent; technical training in manufacturing is a plus., • Previous experience in machine assembly or a related field preferred., • Strong attention to detail and a commitment to quality workmanship., • Ability to read and interpret technical documents and schematics., • Basic mechanical skills and familiarity with hand tools and power tools., • Excellent problem-solving skills and the ability to work independently or as part of a team., • Good communication skills and a positive attitude., • Sit Down Forklift experience is a plus, • Machine Building/Assembling, • Mechanical Troubleshooting Skills, • Mechanical Assembly Skills

Job DescriptionStacks Assembler: Machesney Park, IllinoisOur customer in Machesney Park, Illinois, is seeking motivated individuals to join their team. We’re recruiting Stacks Assemblers to work full-time on 3rd shift. As a Stacks Assembler, you will be responsible for assembling insulation products and plenums while following blueprints, quality standards, and safety procedures in a manufacturing environment. Responsibilities of the Stacks Assembler: • Assemble plenums and insulation units according to product specifications and blueprints., • Perform manual material handling, cutting insulation, bolting, and caulking of units., • Use power tools, tape measures, ladders, and scissor lifts safely and correctly., • Operate forklifts to move materials and completed units as needed., • Inspect finished work to ensure all products meet quality and inspection standards., • Maintain a clean and organized work area while following safety and quality guidelines., • Work comfortably at heights and follow all fall protection and safety requirements. Stacks Assembler Requirements and Qualifications:, • Primary education required., • Basic measuring and mechanical skills required., • Ability to read blueprints and use a tape measure accurately., • Forklift experience or ability to become certified., • Ability to stand for 10+ hours and perform repetitive physical tasks., • Ability to lift 10–25 pounds frequently and up to 10 pounds constantly., • Ability to read and understand English., • Ability to work in high-noise environments and around dust, fumes, oils, and cutting fluids., • Visual and hearing ability sufficient to read measuring instruments and monitor equipment sounds., • 0–3 years of manufacturing or related experience preferred. Pay for Stacks Assembler: $21.85 per hour. Stacks Assembler Benefits:, • Health insurance., • Paid time off., • 401k with company match., • Paid weekly., • Direct deposit.

Job DescriptionDescription: Advanced Machine & Engineering is a diversified manufacturing company that designs, builds, & delivers carbide sawing systems, custom work holding solutions, & automation solutions for a variety of industries. We are looking for a highly skilled CNC Milling Operator with 10–15 years of hands-on experience in a precision machining environment. The ideal candidate will be proficient in setting up, programming, and operating CNC milling machines to produce high-accuracy components for a variety of applications. We have a clean, modern, climate controlled & safe work environment. Responsibilities: Responsibilities include reading and interpreting complex blueprints, selecting appropriate tooling, optimizing machining parameters, and ensuring all parts meet strict quality and dimensional standards. Strong troubleshooting skills and the ability to work independently with minimal supervision are essential. Qualifications/Experience: Experience with Mazak milling machines, including familiarity with Mazatrol controls, is strongly preferred. This role is well-suited for someone who thrives in a small-batch, high-mix job shop environment where adaptability, efficiency, and attention to detail are critical. The operator will work closely with engineering and quality teams to refine processes, improve cycle times, and maintain a clean and safe work area. A proactive approach to continuous improvement and a commitment to producing top-quality work are key to success in this position. · High school diploma or general education degree (GED) required. · Minimum 10 years of CNC machining experience (mill) required. · Must be able to read and interpret blueprints, schematics, and gauges. · Strong math and measuring skills · Ability to operate large overhead crane and operate forklift · Ability to lift 50 lbs. We offer an outstanding benefit package which includes the following: · Medical, RX, Dental and Vision Insurance · Company-paid Life Insurance · Disability Insurance · Flexible Spending Account · Educational Reimbursement Program · 401(K) Retirement Plan with company Match · 10 Paid Holidays, Paid Vacation and PTO Only qualified selected candidates will be contacted for an interview. No phone calls or email inquiries please. Pre-employment, post offer drug screen and physical required on selected candidate. Requirements:

Job Description Forge Resources Group, a leader in custom forgings, is looking for a CNC Setup Operator at our Rockford, IL location. FRG produces steel solutions for a variety of industries through forging, hot forming, and fabrication. Key Responsibilities: • Machine setup, start up, operation and tear down, • Secure all tooling, replace broken or worn tooling, • File, grind, and adjust parts to fit properly, • Keep multiple machines running simultaneously, • Diagnose operating difficulties and make adjustments, • Inspect dies for proper dimensions and defects, • Complete necessary job-related paperwork to include tags, inspection documents, and production log, • Ability to read and use calipers and similar measurement tools to the ten-thousandth place, • Experience reading and interpret blueprints preferred, • Experience in operating and setting up X, Y, Z on vertical mills preferred, • Shop math calculating ability, • Experience with different cutting tools and their purposes, • Experience using indicators to straighten parts/items, • Must work well in a team environment, • Must be able to take direction, • Must be able to grasp and retain complex instructions, • Willingness to ask for clarification of instructions, • Reliability, punctuality, and attentiveness, • Attention to detail · High School Diploma or GED required · Vocational or technical training preferred Physical Requirements: · Requires walking, standing, stooping, crouching, bending, twisting, pulling, pushing · Ability to lift up to 40lbs repetitively Forge Resources Group is a Drug Free Workplace. Candidates must pass a pre-employment Drug Screen, physical and detailed background check. The Drug Screen includes screening for THC and all other drugs that are illegal under federal law, regardless of state or local ordinances. Company DescriptionForge Resources Group is a leader in open and closed-die near net metal forgings, and fabricated assemblies serving diverse industries including aerospace, mining/drilling, railroad, shipbuilding, off-road/ag and other heavy equipment manufacturers.Forge Resources Group is a leader in open and closed-die near net metal forgings, and fabricated assemblies serving diverse industries including aerospace, mining/drilling, railroad, shipbuilding, off-road/ag and other heavy equipment manufacturers.

KENCO - - Responsibilities: Safely operate Powered Industrial equipment to move products or materials for distribution such as standard sit-down or stand-up forklifts, clamp, and picker equipment; Load, unload, and store products and/or materials; Stack and/or transport materials and products to de

Responsibilities: Operates an electric stand-up forklift to move pallets of merchandise and equipment throughout the warehouse; Hand-stacks product from partial pallets onto full pallets of product.

KENCO - - Responsibilities: Safely operate powered industrial equipment to move products or materials for distribution such as standard sit-down or stand-up forklifts, clamp, and picker equipment; Load, unload, and store products and/or materials; Stack and/or transport materials and products to de

Operates an electric stand-up forklift to move pallets of merchandise and equipment throughout the warehouse.

KENCO - - Responsibilities: Safely operate powered industrial equipment to move products; Load, unload, and store products; Complete paperwork and operate inventory management systems; Perform daily safely inspections per the Safety Checklist on forklift trucks; Complete cycle count as required.

ABF Freight - - Responsibilities: Load and unload cargo; Operate a forklift as needed; Perform tractor/trailer inspections; Pickup and delivery of cargo; Complete routine paperwork and log loading sheets.

KENCO - - Responsibilities: Safely operate powered industrial equipment to move products and materials; Load, unload, and store products and/or materials; Stack and/or transport materials and products to designated areas; Use equipment to scan product and print labels; Complete paperwork and operat

Pickup and delivery of cargo to and from various destinations usually within proximity of the consolidation/distribution center.The loading and unloading of trailers utilizing the same techniques, technology and procedures as a dock worker.Actual duties and schedule may vary depending on terminal lo

Must be a licensed forklift operator or be able to obtain a Forklift Operator license. The Forklift Operator I is responsible for the safe and efficient operation of Powered Industrial Equipment. The Forklift Operator I is responsible for utilizing the lift equipment to move, load, unload, and stack

Shift Warehouse Forklift Operator - Loves Park, IL. As a Warehouse Worker at our Loves Park Distribution Center, you are more than just an equipment operator you're an MVP of our team! If you're new to operating forklifts or other material handling equipment, don't worry, if you have an exceptional

Must be a licensed forklift operator or be able to obtain a Forklift Operator license. The Forklift Operator I is responsible for the safe and efficient operation of Powered Industrial Equipment. The Forklift Operator I is responsible for utilizing the lift equipment to move, load, unload, and stack

Operate MHE such as forklifts and other material handling equipment safely, adhering to all safety requirements and policies. Previous forklift experience is a plus, but not required we'll provide the training you need!. Shift Warehouse Forklift Operator - Loves Park, IL.

Must be a licensed forklift operator or be able to obtain a Forklift Operator license. The Forklift Operator I is responsible for the safe and efficient operation of Powered Industrial Equipment. The Forklift Operator I is responsible for utilizing the lift equipment to move, load, unload, and stack

As a Forklift Operator at Lowe’s, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within the warehouse. Operate a forklift to move materials throughout the warehouse. Perform regular maintenance checks on the forklift.

Job Description**: The Forklift Operator at DHL is responsible for safely operating forklifts to move, load, and unload heavy items and pallets within the warehouse. The ideal candidate will have experience operating forklifts, strong attention to detail, and the ability to work independently or as

Must be a licensed forklift operator or be able to obtain a Forklift Operator license. Minimum two years prior forklift operating experience. The Forklift Operator I is responsible for the safe and efficient operation of Powered Industrial Equipment.

Must be a licensed forklift operator or be able to obtain a Forklift Operator license. Safely operate Powered Industrial equipment to move products or materials for distribution such as standard sit-down or stand-up forklifts, clamp, and picker equipment. Perform daily safely inspections per the Saf

Must be a licensed forklift operator or be able to obtain a Forklift Operator license. The Forklift Operator I is responsible for the safe and efficient operation of Powered Industrial Equipment. The Forklift Operator I is responsible for utilizing the lift equipment to move, load, unload, and stack

Valid forklift certification and experience operating sit-down, stand-up, or reach forklifts. The ideal candidate will be responsible for operating forklifts and other warehouse equipment to load, unload, and transport materials efficiently and safely. Operate forklifts and other industrial vehicles

As a Forklift Operator at Lowe’s, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise within the warehouse. Operate a forklift to move materials throughout the warehouse. Perform regular maintenance checks on the forklift.

Material Handler/Forklift Operator (Recruiting). LACOSTA is looking for an experienced forklift driver, warehouse team member for our site in Rockford, IL. Operates forklifts, cardboard compactor, auger, and other machinery.

As a Forklift Operator at Amazon, you will be responsible for operating a forklift to move, locate, relocate, stack, and count merchandise. Inspect and maintain the forklift to ensure safe operation. Valid forklift operator certification.

A Pepsi Warehouse Forklift Operator is responsible for moving, loading, and organizing beverage products safely and efficiently within the warehouse. This role supports daily production and distribution goals by operating forklifts, managing inventory, and preparing orders for delivery. Pepsi Wareho

Job Description**: The Forklift Operator at FedEx is responsible for safely operating forklifts to move, load, and unload heavy items and pallets within the warehouse. The ideal candidate will have experience operating forklifts, strong attention to detail, and the ability to work independently or a

Simple Application, Immediate Hire.All Experience Levels Encouraged to Apply.Full Time, Part Time & Seasonal Openings Available.

Must be a licensed forklift operator or be able to obtain a Forklift Operator license. The Forklift Operator I is responsible for the safe and efficient operation of powered industrial equipment. The Forklift Operator I is responsible for utilizing the lift equipment to move, load, unload, and stack