Offres lean à Glendale, Arizona - Page 2Créer des alertes d'emploi

Job DescriptionDescription: POSITION SUMMARY: The Facilities Maintenance Technician responsible for troubleshooting and repairing manufacturing equipment safely and efficiently to maximize production time. Ensure PM are completed, and documentation is correct to company standards. This is a “safety sensitive” position; therefore, the employee must adhere to all OSHA and Standard Operating Procedures that have been put into place. (LOTO, Hot Work, and Confined Space) JOB FUNCTIONS: • Responsible for the overall maintenance of buildings and production equipment including, but not limited to, plumbing, electrical, and general building repairs., • Respond to break down calls in a timely manner., • Run work order ticking system by closing or adding new items to the system for tracking., • Works with Facilities Manager to ensure preventative maintenance schedules are met, • Works on various projects, • Performs visual inspections to identify potential issues and reports them to the manager., • Maintain a clean and safe work environment., • Supports special events, town hall meetings, conferences, etc. to include setup and tear down as needed., • Work independently and in a team environment., • Work with outside contractors and vendors., • Strictly follow all safety rules and regulations., • Maintains regular attendance and excellent punctuality., • While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles. The employee is also exposed to a variety of extreme weather conditions. The noise level in the work environment is moderate to loud., • While performing the duties of this job, the employee is constantly required to stand, walk; use hands to finger, handle or feel; reach with hands and arms; talk or hear. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl., • Maintenance personnel must adhere to PPE requirements at all times., • Minimum 2 years facility/maintenance experience in automotive and/or manufacturing industry; knowledge of Lean Manufacturing or Lean Six Sigma certification preferred., • Proficient with multimeters, hand tools, and basic diagnostic equipment., • Basic understanding of PLC system and controls is a plus., • Knowledge of electrical, mechanical, hydraulic and pneumatic systems and how they function., • Be able to read blueprints, engineering drawings, and wiring schematics is a plus., • High level of written and verbal communication skills, • Must be available to work overtime and/or weekends based on business needs., • Must possess ability to work and cope well under pressure in a fast-paced environment., • Strong initiative, follow-up, and attention to detail, quality focused and willingness to learn., • Excellent problem- solving skills., • Great organizational skills, ability to prioritize and self-starter., • Intermediate computer skills (Excel, Word, Outlook, and Microsoft), • Valid driver’s license required; clean driving record must be maintained., • Honest, ethical and handles things in a professional manner.Requirements:

Job Description Innovative Chemical Products Group (ICP Group) is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets. ICP Group is comprised of market leading brands known for innovation, quality, and performance. Founded in 2015 and supported by a lean corporate team, ICP Group has scaled rapidly through organic and acquisition growth into one of the largest coatings, adhesives, and sealants companies in North America. ICP Group is headquartered in Andover, MA and has manufacturing and distribution sites throughout North America, Latin America, UK, Europe and the Asia Pacific region. ICP Group is looking to hire a Maintenance Technician to join our team in Phoenix, AZ. The Maintenance Technician provides technical expertise and maintains mechanical equipment such as pumps, agitators, chillers, compressors, piping, valves, switches, starters, relays, and sensors. In this position, you will be a critical member of our maintenance team requiring independent judgement, communication, and participation. We foster mutual respect with all involved to determine the means to accomplish implementation of desired changes for process improvement, regulatory compliance, and other various needs to support daily plant operations. In this role you will be responsible for the following: • Conduct, develop and maintain records for installation, removal, and troubleshooting systems (Pumps, Piping, Valves, Pneumatics, Motor Starters, Wiring logic, etc.), • Mechanical (pneumatic/hydraulic, power transmission, lubrication, seals, joints, fasteners), Electrical (wiring, contactors, relays), and Electronic (sensors, instrumentation, hardware) skills will be utilized to maintain a continuous stream of production through installation, commissioning, removal, troubleshooting and repair of plant equipment, • Diagnosing and correct problems/issues through inspections and testing, • Execute preventative, calibration, and predictive maintenance schedules, • Respond to reactive and corrective maintenance requests, • Use tools including common hand tools, power tools, lifting tools, precision measuring tools, and electronic test gear, • Assist in system development, improvement, and design, • Develop or interpret drawings of existing systems when necessary to assist in troubleshooting and installation, • Work as a part of a maintenance team to accomplish maximum equipment uptime, • As an independent self-starter, understand changing priorities, and focus energies appropriately, • Help direct contractors to execute other scheduled work, • Utilize Process Safety Management for hazardous environments in day-to-day operations, • Ability to work overtime and weekend work when needed, • Perform other duties as assigned or as business needs require to the best of your ability, • Perform quality work within guidelines, deadlines, and processes with or without direct supervision, • Interact professionally with other people, • Work effectively as a team contributor on all assignments, • High School Diploma / GED with Tradesman or equivalent experience; prefer an associate degree within a STEM related field with maintenance experience, • Critical thinking (troubleshooting) experience, • Ability to Develop and read various P&ID types, • Knowledge of Mechanical and Piping Systems, Electrical Devices, and Test Equipment, • Familiarity with CMMS, Predictive Maintenance Techniques, Continuous Improvement Programs, and Root Cause Analysis, • Good computer skills including familiarity with Microsoft Office products, • Good organization skills and attention to detail, • Solid interpersonal, oral, and written communication skills, • Able to prioritize and execute multiple tasks in a high pressure time critical environment, and change priorities based on needs, • Able to work effectively independently and as part of a team, • Strong safety mindset with independent work ethic, • Leadership skills with the ability to manage and direct teams, • Able to work overtime, including weekends, when required, • May be required to lift/move up to 50 lbs., • Able to work in all types of environments and under difficult conditions; hot, cold, dust, indoors, outdoors, • Individual may be required to handle hazardous and non-hazardous materials, • Individual may be required to wear Personal Protection Equipment such as: Respirators, FR Clothing, Chemical Resistant Gloves, Hard Hat, Safety Eyewear, Face shield, etc., • Ability to work closely with chemicals or bio-substances found in laboratory or production facilities ICP Group is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, or religion or other legally protected status. Powered by JazzHR OtfVI2BpLY

Job DescriptionLead Technician • Experience: 8-10 Years, • Certifications: Possess and maintain all ASE Certifications, holding Senior Master Status., • Diagnostic Skills: Proficient in all diagnostic procedures, including hard electrical issues and driveability problems, across all vehicle systems, makes, and models., • Repair Capabilities: Capable of complete system breakdown and reassembly, including but not limited to engine jobs, transmission replacement, tune-ups, electrical system testing, and overall vehicle maintenance., • Warranty Management: Responsible for managing all warranties., • Quality Control: Oversee and ensure quality control of all jobs completed by all technicians., • Technical Guidance: Proficient in looking up wiring diagrams and procedures; able to teach and guide lower-level technicians., • Policy Compliance: Follow and ensure all other technicians follow established policies and procedures., • Shop Management: Monitor shop operations and maintain quality control on all outgoing jobs., • Leadership: Lead by example, communicating problems and concerns to the manager to resolve issues proactively.A Technician, • Experience: 5-10Years, • Certifications: Possess and maintain all ASE Certifications, holding Senior Master Status., • Diagnostic Skills: Proficient in all diagnostic procedures, including hard electrical issues and driveability problems, across all vehicle systems, makes, and models., • Repair Capabilities: Capable of complete system breakdown and reassembly, including but not limited to engine jobs, transmission replacement, tune-ups, electrical system testing, and overall vehicle maintenance., • Support Role: Assist the Lead Technician with warranties and overseeing other technicians' work., • Technical Guidance: Able to look up wiring diagrams and procedures; teach and guide lower-level technicians., • Policy Compliance: Follow all established policies and procedures. All Technicians, • Procedures: Follow all opening and closing procedures, as well as all company policies and procedures., • Inspections: Perform inspections properly and take good, accurate pictures during the inspection process., • Communication: Comply with requests from the manager or service writers., • Cleanliness: Maintain cleanliness of the shop, break room, and employee's bathroom daily., • Productivity: Ensure continuous engagement in tasks; "if there is time to lean, there is time to clean."Punctuality: Opening technicians arrive 15 minutes before start time; all other technicians arrive 10 minutes before start time to prepare for the shift.

Job DescriptionDescription: Company Overview: Masterbilt INC is a renowned leader in precision manufacturing, boasting a legacy of innovation and excellence. Since our inception, we've been committed to pushing the boundaries of CNC machining, delivering top-tier solutions to our esteemed clientele across diverse industries. Our state-of-the-art facilities and dedicated team ensure that every project meets the highest standards of quality and precision. Overall Purpose: The CNC Machinist (Mill Turn) plays a vital role in our operations by programming, setting up, and operating computer numerical control (CNC) Mill/Turn machines. They are responsible for maintaining safety and quality standards, documenting procedures, and ensuring equipment upkeep to support the achievement of Masterbilt’s business goals. Requirements: Essential Job Functions & Expected Outcomes: • Plan machining processes by studying work orders, blueprints, and specifications, and interpreting geometric dimensions and tolerances (GD&T)., • Program CNC machines by entering instructions, setting tool registers, and proving part programs., • Set up machines by installing and adjusting chucks, tools, and attachments., • Develop fixturing designs and tools for effective work holding., • Maintain specifications by observing operations, taking measurements, troubleshooting processes, and adhering to quality assurance procedures., • Ensure safe operations by following safety procedures and regulations., • Conduct preventive maintenance on equipment and troubleshoot malfunctions., • Mori Seiki SL-OH, • Mori Seiki SL-25B, • Mazak QT20, • Hardinge T51SP, • Mori Seiki CL-25B, • Daewoo 2500SY, • Daewoo Puma 400B, • Education: High school diploma or equivalent., • Experience: Minimum 2 years in manufacturing and CNC machining a must., • Functional Skills: Strong attention to detail, mechanical aptitude, proficiency in interpreting technical drawings and blueprints, and familiarity with lean manufacturing principles., • Technology Aptitude/Skills: Proficient in CNC Lathe machines., • Language Skills: Excellent verbal and written communication, ability to create work instructions and train others., • Ability to stand for long periods, operate machinery, and lift up to 75 lbs., • Exposure to moderate noise in manufacturing environments., • Occasional requirement for suitable Personal Protective Equipment.

Job DescriptionPosition Summary: As a Machine Operator at Angie’s Food Concepts Production Center, you’ll be responsible for operating and maintaining food production machinery to ensure efficient and safe production of high-quality food items. You’ll work with equipment that produces, mixes, cooks, or packages food for our restaurant locations. You will play a key role in maintaining our consistency, safety, and speed standards while supporting our growing network of restaurants. Who We Are: Angie's Food Concepts is on a mission to make “luxury” foods affordable! We are vertically integrated, operationally lean, and creatively bold, bringing premium ingredients like Maine lobster, Antibiotic and Hormone-Free Chicken, and USDA prime steak to the drive-thru at unbeatable speed and price. Our Production Center is the engine behind it all, and we’re looking for dedicated team members to help us power the future of food. A Machine Operator has the following primary responsibilities: • Set up, start, operate, and shut down food production equipment according to standard operating procedures (SOPs), • Monitor machines during operation to ensure proper functioning and product consistency, • Perform routine equipment checks and minor maintenance to prevent downtime, • Accurately record production data, machine performance, and any issues encountered, • Identify and report mechanical or safety issues to supervisors and maintenance, • Follow food safety, hygiene, and quality standards at all times, • Assist with changeovers, cleaning, and sanitizing of machines between product runs, • Support overall production goals and timelines through collaboration with other team members, • Assist with production tasks as needed The Ideal Candidate: • 1+ year of machine operation experience in a food manufacturing or production environment preferred, • Basic mechanical aptitude and ability to troubleshoot minor equipment issues, • Familiarity with GMPs, HACCP, and food safety standards is a plus, • Ability to lift up to 50 lbs and stand for extended periods, • Attention to detail and commitment to quality, • Competitive salary, • Opportunities for professional development and career advancement., • Health, dental, and vision insurance.

Job DescriptionDescription: Hybrid: Must be on site at a Phoenix location that is most convenient to candidate's residence 3 days per week - 2 days remote Pay Range: Compensation is commensurate with experience and will be discussed at a later stage Community Medical Services (CMS) is hiring a Regional Operations Director. Reporting to the VP of Operations, the Regional Operations Director will lead the transformation and optimization of our behavioral health services across multiple facilities. This is a high-impact leadership role where you'll drive operational excellence, implement innovative solutions, and directly influence the quality of care for thousands of patients while managing multi-million dollar P&L responsibilities. As a key member of our senior leadership team, you'll have the opportunity to shape the future of our operations, mentor emerging leaders, and establish best practices that will become the standard across our organization. This role offers significant growth potential for an operations executive ready to make their mark in healthcare. As part of our mission to help individuals recover from substance use disorders, you’ll thrive in a supportive, engaging, and fulfilling work environment where your contributions are valued. Along the way, we’ll invest in your well-being through a benefits package that includes: • Subsidized medical, dental, and vision insurance, • Health savings account, • Short and long-term disability insurance, • Life insurance, • Paid sick, vacation, and holiday time, • 401K retirement plan with match, • Tuition and CME reimbursement up to 100%, • Employee assistance program to support your mental health and wellness Strategic Operations Leadership • Drive operational excellence across assigned facilities by developing and implementing scalable processes that improve quality, efficiency, and patient outcomes, • Own P&L responsibility for multiple locations with combined revenue of $XX million, achieving targeted growth and profitability metrics, • Build and lead a high-performing team of Clinic Coordinators, Regional Nursing Managers, and support staff across multiple locations, • Create talent development programs that identify and cultivate future leaders while ensuring succession planning for critical roles, • Ensure 100% compliance with CARF, state, federal, and RBHA requirements through systematic monitoring and proactive risk management, • Represent the organization at state and federal agency meetings, building strategic relationships with regulators, payors, and community partners, • Bachelor's degree in Healthcare Administration, Business, or related field, • 7+ years of progressive multi-site healthcare operations management experience, • Demonstrated success managing P&L responsibilities of $5M+ with proven ability to drive revenue growth and margin improvement, • Experience with Lean, Six Sigma, or other process improvement methodologies, • Strong knowledge of behavioral health regulations, including CARF accreditation standards, • Proven ability to lead teams of 50+ employees across multiple locations, • Experience in behavioral health or substance abuse treatment settings, • Certification in Lean, Six Sigma, or Project Management (PMP), • The ability to use a phone, computer, printer, and copier is required., • Frequent use of Microsoft office products, including but not limited to Outlook, Word, Excel, and PowerPoint., • The ability to use the internet and various web browser software is required. Core Competencies: • Strategic Thinking: Ability to see the big picture while managing day-to-day operations, • Data-Driven Decision Making: Expert at analyzing complex data to drive actionable insights, • Change Leadership: Proven ability to lead transformational change in complex environments, • Communication Excellence: Exceptional ability to influence and engage stakeholders at all levels, • Cultural Competency: Commitment to diversity, equity, and inclusion in all aspects of operations Success Metrics: Within your first year, success will be measured by: • Achievement of financial targets including revenue growth and EBITDA margins, • Improvement in key operational metrics (patient satisfaction, clinical outcomes, staff retention), • Successful implementation of at least 2 major process improvement initiatives, • 100% compliance with all regulatory requirements across assigned facilities, • Development and execution of talent pipeline for key positions Physical Working Conditions and Office Setting Description: • Requires sitting and standing associated with a normal office environment., • Manual dexterity using a calculator and computer keyboard., • Requires prolonged sitting, standing, frequent bending, stooping, or stretching., • Some lifting may be required., • Frequent and prolonged typing and frequent and prolonged operation of computer, keyboard, and telephones required., • Requires occasional use of fax machines, telephones, copiers, and other office equipment., • Employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and or move up to 50 pounds. #CLSTF About Community Medical Services Community Medical Services (CMS) is a CARF-accredited addiction treatment program providing services in the form of outpatient medication-assisted treatment and one-on-one and group counseling to those seeking help with their opioid use disorder. Headquartered in Arizona with more than 70 treatment clinics in 14 states, CMS is dedicated to meeting the challenges presented by the growing opioid epidemic in communities where treatment is lacking. Our Commitment We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, disability status, sexual orientation, gender identity, age, protected veteran status or any other characteristic protected by law. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Other Conditions Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards. We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! Position Overview: The Line Lead, Build role is a front-line supervisor role, responsible for directly managing and developing a team of hourly associates in an Inspection Center to regularly achieve production targets. This role is not visa eligible. What you'll be doing: • Manage the movement of cars into and out of the Inspection Center safely for repairs, while meeting or exceeding set production and quality goals., • Meet or exceed inventory production goals on a daily, weekly and monthly basis., • Oversee day-to-day activities of assigned team; identify team's strengths and weaknesses; determine areas of opportunity and the appropriate steps to improve., • Engage assigned team, provide appropriate coaching, development and performance management; offer feedback and demonstrate desired skills., • Create a work and team environment that inspires positive communication, team cohesion, and adherence to Carvana's Values., • Proactively communicate information to team members, providing clear understanding of expectations, performance measures, and goals., • Prevent and resolve conflict among team members., • Monitor and ensure adherence to systems, policies, procedures, and performance standards., • Review and approve identified mechanical and physical defects of incoming inventory., • Lead a team of production associates and partner with the Inspection Center General Manager to repair or reject inventory based on estimated cost of repairs and/or the overall quality of the vehicle., • Train a team of production associates using Quality Control standards to identify and complete repairs effectively and efficiently the first time, minimizing re-checks and delays in production., • Identify and complete repairs effectively and efficiently the first time, to minimize re-work and delays in production., • Conscientiously work in ways that decrease the possibility of injury to yourself or other team members in the shop due to spills or other preventable hazardous conditions., • Effectively manage multiple associates, including ensuring appropriate employee development and performance management. What the job requires: To be able to do your job at Carvana, there are some basic requirements we want to share with you. • High School Diploma or GED equivalent, • Experience using computers, • Must be at least 18 years of age, • Demonstrated functional expertise in one or more areas pertaining to Carvana's reconditioning process, • Demonstrated understanding of our current reconditioning processes and lean principles, • Valid unrestricted driver's license with a clean driving record in the last 3 years., • Must be able to lift up to 60 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels, • Requires standing for extended periods of time with frequent stretching, reaching, walking, stooping, pushing, and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance., • Requires use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment., • Ability to maintain high volume and high-quality content in a fast-paced environment., • Ability to effectively delegate tasks to team members., • Ability to communicate and interact with others effectively in a professional, courteous manner., • Ability to communicate clearly and concisely, both written and oral., • Ability to maintain high volume and high-quality content in a fast-paced environment., • Ability to multitask and prioritize effectively., • Ability to resolve complex issues with guidance from others., • Ability to work overtime and on weekends. What we'll offer in return • Full-Time Position with a competitive salary, • Medical, Dental, and Vision benefits, • 401K with company match, • A multitude of perks including student loan payments, discounts on vehicles, benefits for your pets, and much more, • A great wellness program to keep you healthy and happy, both physically and mentally, • Access to opportunities to expand your skillset and share your knowledge with others across the organization, • A company culture of promotions from within, with a start-up atmosphere allowing for varied and rapid career development, • A seat in one of the fastest-growing companies in the country Legal stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Hours for Night Shift will be 4PM - 3AM About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our car's are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards. We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! Position Overview: This is a supervisory position in an Inspection Center overseeing a team carrying out daily operations within a Carvana Inspection Center.. The Reconditioning Manager oversees all aspects of the vehicle reconditioning process and directs at least five leads and up to 70 front line associates in a lean manufacturing environment. This role will be responsible for maintaining a culture of continuous improvement and high associate engagement while meeting quality, production, and cost objectives. This position is not eligible for visa sponsorship. What you'll be doing: ● Oversee day-to-day operations within the Inspection Center. ● Provide mentoring and accountability to direct reports and succession planning through appropriate coaching, leadership development and training, and performance management. ● Participate in the development and execution of strategic plans, goals, and objectives, ensuring alignment with those of the company. ● Ensure adherence to operating standards, systems, policies, procedures, and performance standards. ● Create a work and team environment that inspires positive communication, team cohesion, and adherence to Carvana's Values. ● Maintain supervisory staff by recruiting, selecting, orienting, and training employees. ● Ensure progression path training and certification processes are consistently executed. ● Train and mentor leads and associates by providing competency-based feedback. ● Ensure adequate production capacity levels for each line and assist with production planning. ● Ensure compliance with all health and safety and loss prevention guidelines. ● Provide vision and guidance to the reconditioning team in meeting performance metrics. ● Positively reinforce and engage the team regarding quality, production and cost objectives. ● Participate in and lead problem solving and continuous improvement efforts. What the job requires: To be able to do your job at Carvana, there are some basic requirements we want to share with you. ● 5 years of management experience either in automotive or a lean manufacturing environment. ● Knowledge of lean manufacturing principles. ● Experience leading and developing associates. ● Proven ability to obtain project deliverables and company metrics. ● Ability to read, write, speak and understand English. ● Must be at least 18 years of age. ● Valid driver's license with a clean driving record (no DUIs and no more than two moving violations in the last 3 years). ● Ability to maintain high volume and high-quality content in a fast-paced environment. ● Excellent written, verbal and interpersonal communication skills. ● Ability to work with and through teams to achieve results ● Strong analysis and decision making ability. ● Proficient computer skills. ● Ability to work overtime and on weekends. ● Ability to walk up to three miles each day. ● Requires standing for extended periods of time with frequent stretching, reaching, walking, stooping, pushing, and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance. ● Must be able to lift up to 40 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels. ● Requires use of safety equipment and PPO that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment. This job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Legal stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories.

Job Description Chromalloy is a global engineering & solutions company. We are a leadings provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. We develop, manufacture and repair critical turbine components for a range of engine platforms. Our solutions support the engines running the aerospace, energy and defense industries around the world. Video: What We Do Why work at Chromalloy? Chromalloy employees are proud, passionate problem-solvers who strive to live our values every day. A career with Chromalloy is an opportunity to learn from top industry experts, work with important technologies, and unlock a passion for innovation. Join our team of experts, innovators and problem-solvers delivering world-class solutions for our customers. As a global company, we are committed to creating an inclusive environment where all employees feel represented, heard, and able to bring their best selves to work every day. Be part of something bigger with Chromalloy! Our Total Rewards Program is designed to support you today and in the future. • Comprehensive and flexible benefit options starting on day one, including medical, dental, vision, EAP, wellness incentives, and 401(k) with employer matching., • Development & progression opportunities for every employee – regular performance conversations, training and development curriculum, and engineering fellowship programs., • Paid time off, including vacation, sick time, paid holidays, floating holidays, and parental leave—all eligible on your first day of employment! 5th shift: Friday, Saturday, Sunday 5:00pm-5:30am Maintenance Mechanic Duties: • Troubleshoot and repair all hydraulic systems and equipment., • Troubleshoot and repair all pneumatic systems and equipment., • Troubleshoot and repair HVAC systems, perform PM’s on HVAC systems., • Establish and follow Preventive Maintenance (PM) schedules and procedures for equipment., • Use and read blue prints, schematics, flow diagrams and one line drawings to diagnose and repair production equipment., • Use mathematical formulas to solve for Area, Volume, Amperes, Ohms, Watts and other common maintenance related problems., • Support all lean manufacturing and total preventive maintenance (TPM) initiatives., • Maintains safe and clean working environment by complying with procedures, policies and regulations., • Regular inspection of assigned equipment to identify areas in need of attention., • Maintains continuity among team members by documenting and communicating actions, irregularities and continuing needs improvement., • Responsible for facility repairs such as drywall, plumbing, painting etc., • Regular attendance and punctuality., • Adhere to and promote Corporate Code of Ethical Standards, • Ensures compliance with Company IPM/QPM and ISO-9000 quality requirements, • Repair landscape irrigation system., • Performing other tasks in the facility, as needed. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily List the requirements below that are representative of the knowledge, skill, and/or ability required to successfully accomplish the essential duties of the job. • Ability to read, interpret blueprints and equipment manuals, • Knowledge of mechanics, pneumatics, hydraulics, and basic electrical circuitry, • Ability to read, interpret and understand work in-process documents, • Possess minimum welding, plumbing and carpentry skills, • Understand preventative maintenance systems, • Strong verbal and written communication skills, • Self-motivated with a high level of ownership and accountability, • Lean skills continually drives process improvements, • Team building skills, • Must be fluent in English, i.e. speaking, reading, writing List the level of education and/or experience needed to successfully accomplish the essential duties of this job. • High School diploma or equivalent, • Minimum of five (5) years experience in a medium and/or heavy industrial manufacturing environment, • Fork lift certification, • Certify color vision per electrical specifications #ZR Due to government regulation only US persons (U.S. citizen, U.S. naturalized citizen, U.S. permanent resident, holder of U.S. approved political asylee or refugee status) may be considered for this role. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. Chromalloy is an equal opportunity employer - vets/disabled. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please contact: Company DescriptionChromalloy is a global engineering & solutions company. We are a leadings provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. We develop, manufacture and repair critical turbine components for a range of engine platforms. Our solutions support the engines running the aerospace, energy and defense industries around the world. Why work at Chromalloy? Chromalloy employees are proud, passionate problem-solvers who strive to live our values every day. A career with Chromalloy is an opportunity to learn from top industry experts, work with important technologies, and unlock a passion for innovation. Join our team of experts, innovators and problem-solvers delivering world-class solutions for our customers. As a global company, we are committed to creating an inclusive environment where all employees feel represented, heard, and able to bring their best selves to work every day. Be part of something bigger with Chromalloy! Our Total Rewards Program is designed to support you today and in the future. • Comprehensive and flexible benefit options starting on day one, including medical, dental, vision, EAP, wellness incentives, and 401(k) with employer matching., • Development & progression opportunities for every employee – regular performance conversations, training and development curriculum, and engineering fellowship programs., • Paid time off, including vacation, sick time, paid holidays, floating holidays, and parental leave—all eligible on your first day of employment!, • Competitive pay, including eligibility for quarterly and annual bonuses, depending on role and site. Eligibility for individual benefit plans may vary based on employment status. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. Chromalloy is an equal opportunity employer - vets/disabled. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please contact: is a global engineering & solutions company. We are a leadings provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. We develop, manufacture and repair critical turbine components for a range of engine platforms. Our solutions support the engines running the aerospace, energy and defense industries around the world. \r\n\r\nWhy work at Chromalloy?\r\nChromalloy employees are proud, passionate problem-solvers who strive to live our values every day. A career with Chromalloy is an opportunity to learn from top industry experts, work with important technologies, and unlock a passion for innovation. Join our team of experts, innovators and problem-solvers delivering world-class solutions for our customers. As a global company, we are committed to creating an inclusive environment where all employees feel represented, heard, and able to bring their best selves to work every day. Be part of something bigger with Chromalloy!\r\n\r\nOur Total Rewards Program is designed to support you today and in the future.\r\n\r\n* Comprehensive and flexible benefit options starting on day one, including medical, dental, vision, EAP, wellness incentives, and 401(k) with employer matching.\r\n* Development & progression opportunities for every employee – regular performance conversations, training and development curriculum, and engineering fellowship programs.\r\n* Paid time off, including vacation, sick time, paid holidays, floating holidays, and parental leave—all eligible on your first day of employment!\r\n* Competitive pay, including eligibility for quarterly and annual bonuses, depending on role and site.\r\n\r\nEligibility for individual benefit plans may vary based on employment status.\r\n\r\nChromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.\r\n\r\nAny offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations.\r\n\r\nChromalloy is an equal opportunity employer - vets/disabled.\r\n\r\nIn the United States, if you need a reasonable accommodation for the online application process due to a disability, please contact:

Job Description Precision Science, Inc (based in Phoenix, Arizona) is seeking a highly driven individual to join our growing company in the capacity of Maintenance Technician III. Precision Science is a leader in the manufacturing of FDA/EPA regulated products within the animal healthcare industry, including powders, pellets and extruded products. KEY DUTIES OF RESPONSIBILITES: • Diagnosing complex malfunctions on a variety of industrial equipment, including PLC systems, automated machinery, and specialized production tools, • Conducting detailed inspections, lubrication and adjustments on machinery according to established schedules to prevent breakdowns and optimize equipment lifespan., • Interpreting blueprints electrical schematics, and technical manuals to understand system operations and identify root causes of issues., • Assisting with installation, modification, and upgrades of industrial equipment, potentially leading smaller projects., • Investigating recurring issues to identify underlying problems and implement corrective action, • Maintaining detailed work orders, documenting repairs, and reporting on equipment performance and maintenance needs., • Ensure all safety rules and safe work procedures such as Lockout/Tag out, Confined Space, PPE are followed by themselves and by others working in and around the machinery, • Respond quickly to address downtime issues promptly and effectively Requirements JOB REQUIREMENTS: • Regular Hours: M- Thurs 2pm-12:30am (Additional hours as assigned to meet business needs.), • Overtime as needed, • On call hours: you may be required to be on call to support first shift production. You will be compensated for all actual hours worked, and may submit mileage reports when you are required to return to work after working a regular shift., • Prolonged standing and repetitive motions, bending, stooping, pushing, and pulling., • May be required to frequently lift up to 50 pounds at a time and more., • High school diploma or equivalent, • Minimum 5 years of experience in a hands-on manufacturing maintenance role, • Thorough understanding of mechanical principles, electrical systems, hydraulics, pneumatics and basic programming, • Strong analytical skills to diagnose complex equipment issues and develop effective solutions, • Skilled use of a wide range of tools including wrenches, multimeters, welding equipment, and specialized maintenance tools., • Familiarity with CMMS (Computerized Maintenance Management Systems) to manage work orders and track equipment history., • Ability to effectively communicate with operators, engineers, and supervisors regarding equipment issues and maintenance needs., • Working knowledge of lean manufacturing principles., • Proficiency in Microsoft Word, Excel, PowerPoint and Access, • Experience with IQ/OQ in an FDA facility, • Knowledge of SDS, HACCP and cGMP

Job Description SUMMARY OF POSITION Precision Science, Inc (based in Phoenix, Arizona) is seeking a highly driven individual to join our growing company in the capacity of Maintenance Technician III. Precision Science is a leader in the manufacturing of FDA/EPA regulated products within the animal healthcare industry, including powders, pellets, and extruded products. KEY DUTIES OF RESPONSIBILITIES: ·Diagnosing complex malfunctions on a variety of industrial equipment, including PLC systems, automated machinery, and specialized production tools. ·Conducting detailed inspections, lubrication, and adjustments on machinery according to established schedules to prevent breakdowns and optimize equipment lifespan. ·Interpreting blueprints, electrical schematics, and technical manuals to understand system operations and identify root causes of issues. ·Assisting with installation, modification, and upgrades of industrial equipment, potentially leading smaller projects. ·Investigating recurring issues to identify underlying problems and implement corrective actions ·Maintaining detailed work orders, documenting repairs, and reporting on equipment performance and maintenance needs. ·Ensure all safety rules and safe work procedures such as Lockout/Tag out, Confined Space, PPE are followed by themselves and by others working in and around the machinery ·Respond quickly to address downtime issues promptly and effectively ·Providing guidance and on-the-job training to lower-level maintenance technicians The above statements are intended to describe the general nature and level of work being performed by employees in this position. This is not intended to be a list of all responsibilities. JOB REQUIREMENTS: ·Specialization in automation packaging equipment. ·Regular Hours: Monday – Friday 7:30AM – 4PM ·Overtime as needed by the department ·On call hours: You may be required to be on call to support second shift production. You will be compensated for all actual hours worked, and may submit mileage reports when you are required to return to work after working a regular shift ·Down time: If there is down time in the maintenance department, it is your responsibility to seek work from your manager. PHYSICAL REQUIREMENTS: ·Prolonged standing and repetitive motions, bending, stooping, pushing, and pulling. ·May be required to frequently lift to 50 pounds at a time and more. ·Hand dexterity and strength. ESSENTIAL ABILITIES: ·High school diploma or equivalent ·Minimum 5 years of experience in a hands-on manufacturing maintenance role ·Thorough understanding of mechanical principles, electrical systems, hydraulics, pneumatics, and basic programming ·Strong analytical skills to diagnose complex equipment issues and develop effective solutions ·Skilled use of a wide range of tools including wrenches, multimeters, welding equipment, and specialized maintenance tools ·Familiarity with CMMS (Computerized Maintenance Management Systems) to manage work orders and track equipment history ·Ability to effectively communicate with operators, engineers, and supervisors regarding equipment issues and maintenance needs ·Working knowledge of lean manufacturing principles ·Proficiency in Microsoft Word, Excel, PowerPoint and Access ·Experience with IQ/OQ in an FDA facility ·Knowledge of SDS, HACCP and cGMP ·Experience working with regulatory agencies (e.g. OSHA, AIB, FDA, EPA) Precision Science is An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, genetic information or protected veteran status. Company DescriptionWe are a leading U.S. contract manufacturer of animal pharmaceuticals, nutraceuticals and medicated feed products. We've been in business for over 30 years working with soft chews, powders, pellets and moving into liquids. Our facilities are FDA and EPA registered as well as EMA and Organic certified.We are a leading U.S. contract manufacturer of animal pharmaceuticals, nutraceuticals and medicated feed products. We've been in business for over 30 years working with soft chews, powders, pellets and moving into liquids. Our facilities are FDA and EPA registered as well as EMA and Organic certified.

Job Description Strategic Sourcing Manager Location: Phoenix or Goodyear, AZ (On-Site) Department: Supply Chain Reports To: Director of Supply Chain Employment Type: Full-Time | Exempt About GTI Fabrication GTI Fabrication is a leader in industrial modular fabrication, serving the energy, defense, and heavy-industrial markets. With advanced facilities in Arizona and New York, GTI designs and builds containerized power systems, structural steel enclosures, and modular platforms for mission-critical applications around the world. As GTI continues its growth trajectory, we are expanding our strategic sourcing and category management function to strengthen supplier partnerships, optimize material costs, and drive supply chain resiliency across all categories of spend. Position Overview The Strategic Sourcing Manager will build and lead GTI’s commodity management organization, responsible for category strategy, supplier development, and cost optimization across key material groups — including metals, electrical harnesses, fasteners, consumables, and engineered components. This leader will develop sourcing strategies that align with GTI’s manufacturing, engineering, and operational priorities. The ideal candidate combines strategic thinking, commercial acumen, and hands-on execution, with a proven record of scaling sourcing teams and delivering sustainable cost savings in complex, fast-paced manufacturing environments. Key Responsibilities • Build, lead, and mentor a team of Commodity Managers, each responsible for distinct material categories such as metals, electrical harnesses, consumables, fabrication services, and packaging., • Develop and execute multi-year sourcing strategies that align supplier capabilities with GTI’s operational growth and product roadmap., • Identify and qualify suppliers capable of meeting cost, quality, and delivery targets in support of both production and new product introduction (NPI)., • Lead supplier selection, negotiation, and long-term agreement (LTA) development for strategic materials and services., • Implement category management frameworks that ensure supply continuity, risk mitigation, and total cost of ownership (TCO) optimization., • Establish and monitor key performance indicators (KPIs) for suppliers — on-time delivery, quality performance, responsiveness, and cost reduction., • Partner with Engineering and Operations to drive value engineering and design-to-cost initiatives across key commodities., • Collaborate with Quality to ensure supplier compliance with ISO 9001, material certification, and inspection standards., • Build standardized sourcing processes and governance, including supplier segmentation, bid evaluation, and spend analytics., • Lead or participate in cross-functional cost reduction and process improvement initiatives., • Bachelor’s degree in Supply Chain Management, Business, Engineering, or related field., • 10+ years of progressive sourcing or procurement experience, including 3+ years in a leadership or category management role., • Strong experience sourcing industrial or manufacturing materials such as steel, fabricated components, harnesses, electrical systems, and consumables., • Demonstrated success in building or leading commodity management teams., • Expertise in strategic sourcing, supplier negotiation, and total cost of ownership analysis., • Proven ability to lead cross-functional initiatives with Engineering, Operations, and Finance., • Experience developing and executing category strategies in high-mix, project-based manufacturing environments., • Strong analytical and contract management skills; proficiency in Excel, Power BI, and ERP systems (NetSuite preferred)., • Master’s degree in Business or Supply Chain Management., • Certifications such as CPSM, CPIM, or PMP., • Experience in modular fabrication, defense, or energy systems., • Knowledge of Lean Manufacturing and continuous improvement principles., • Full-time position based in Phoenix or Goodyear, AZ., • Work performed in both office and manufacturing environments.

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world’s recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech’s family of companies touches 90% of the world’s fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing — we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. • Perform full setups on CNC mills and/or lathes from print or model — including indicating vises, fixtures, and part zeros., • Interpret complex blueprints, GD&T, and 3D models to execute machining strategies., • Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency., • Troubleshoot issues related to tooling, setup, and part accuracy independently., • Ensure in-process inspection and first article inspection compliance., • Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: • 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts., • Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets., • Strong understanding of machine offsets, tool presetting, and basic G/M code., • Experience with multi-axis machining or live tooling., • Strong understanding of machining processes and techniques., • Proficient in reading and interpreting blueprints and technical drawings., • Familiar with the use of precision measuring instruments like micrometers and calipers., • Solid understanding of lean manufacturing Benefits and Compensation • Two medical plans (PPO & HSA), dental, and vision insurance, • Paid time off, Vacation, and eight Holidays, • Employee assistance program (EAP), • 401k, • Profit sharing, • Free Life, • Free AD&D, • Free Disability insurance (Shot and Long-Term Disability), • Tuition Assistance, • Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Job DescriptionJob Title: Vice President of Quality ControlLocation: Phoenix / Goodyear, AZ (On-Site) Department: Quality & Manufacturing Reports To: CEO Employment Type: Full-Time | ExemptAbout GTI FabricationGTI Fabrication is a leader in modular steel infrastructure, steel fabrication, and mission-critical manufacturing for the defense, energy, and heavy industrial markets. From large welded frames and enclosures to portable infrastructure modules, we are committed to manufacturing excellence, safety, traceability, and growth. We’re seeking a senior executive to build and lead the Quality Control function as we scale.Position OverviewThe VP of Quality Control will lead the development and execution of a world-class quality control (QC) system across fabrication, welding, finishing, assembly, and field deployment. This role is accountable for establishing the culture, systems, processes, metrics, and teams that ensure products meet or exceed customer, regulatory, and internal quality expectations—especially in a high-volume steel/manufacturing environment. The ideal candidate brings deep metal fabrication experience (weldments, bolted connections, steel frames), strong systems thinking, proven leadership at the senior level, and the ability to influence across design, operations, supply chain, and customers.Key Responsibilities • Define and drive the quality control strategy aligned with corporate objectives: manufacturing scale-up, cost reduction, zero defects, delivery reliability., • Lead the Quality Control organization (inspectors, supervisors, weld procedure engineers, fabrication QA/QC) across multiple plants/facilities., • Establish and maintain rigorous fabrication quality standards: welding (AWS, AISC, ISO 3834), weld procedure qualification, weld inspection, non-destructive testing (NDT), surface treatment/coatings, bolted and structural connections., • Oversee incoming material inspection, in-process quality checks, final inspection, paint/coating verification, packing/shipping quality, and field installation quality metrics., • Implement and maintain the Quality Management System (QMS): ISO 9001, and as applicable ISO 14001, ISO 45001, and relevant steel/fabrication standards., • Drive root-cause analysis, corrective/preventive actions (CAPA), non-conformance material (MRB) process, supplier quality assurance, and continuous improvement (Lean, Six Sigma)., • Set and monitor key quality metrics: first pass yield (FPY), scrap rate, rework rate, on-time delivery with quality, cost of poor quality (COPQ), customer defect rate, internal audit findings, supplier defect rate., • Partner with Fabrication, Manufacturing Engineering, Supply Chain, and Design to ensure design for manufacturing and quality: early engagement, weldability, assembly processes, material selection., • Lead quality audit programs: internal audits, external audits, customer audits, regulatory/industry audits (DOT, AISC, AWS, NADCAP as applicable)., • Serve as senior executive interface for quality with customers, regulators and top-tier suppliers. Provide quality performance reports to the executive leadership team and Board as needed., • Build and develop the quality organization: recruit, train, coach, develop leadership in QC. Drive culture of accountability, craftsmanship, continuous learning., • Oversee budget for the quality control organization, capital expenditures for inspection/test equipment, metrology, and NDT assets.Required Qualifications, • Bachelor’s degree in Engineering, Metallurgy, Manufacturing, or related technical discipline; Master’s preferred., • Minimum 15 years of progressive experience in quality, manufacturing or fabrication environments; with at least 5 years at a senior leadership/executive level (director/VP) in a heavy manufacturing or steel fabrication organization., • Demonstrated experience in steel fabrication/manufacturing: weldments, structural steel, bolting, coatings, finishing, large assemblies, modules., • Deep familiarity with welding standards (AWS, AISC, ISO 3834), fabrication standards, NDT methods (UT, MT, PT), and QA/QC systems in fabrication environments., • Proven success implementing and maintaining ISO 9001 (and/or ISO 14001/45001) QMS in a multi-site manufacturing organization., • Strong analytical and data-driven mindset: metrics, dashboards, root cause, trending, continuous improvement., • Excellent leadership and organizational capability, with experience building high-performance QC teams, influencing at C-Suite level, and working cross-functionally., • Exceptional communication, customer-facing skills, and ability to engage suppliers, customers, regulators and senior leadership.Preferred Qualifications, • Experience in modular fabrication, enclosure systems, defense or energy manufacturing., • Certifications such as Certified Welding Inspector (CWI), Certified Quality Engineer (CQE), Six Sigma Black/Green Belt., • Experience with ERP/MES integration of quality data, digital QMS, manufacturing analytics platforms., • Field quality experience or mobile/factory audit background across multiple sites.

Job Description Job Description LEAD WELD/FABRICATION SHOP Sun Country Truck Equipment Inc is the premier commercial truck body manufacturer and commercial vehicle equipment supplier in Arizona. From landscape bodies, service bodies, van interiors and flatbeds to hitches and accessories we provide the best of custom manufactured truck bodies and factory commercial vehicle equipment in the Southwest. Job Description: The Fabrication Lead is responsible for overseeing production and providing guidance for employees within the Fab dept., coordinating with manager on daily requirements, and establishing plans to accomplish those goals. The lead will ensure adherence to all SCT safety guidelines and procedures. Applicants must have extensive experience in welding/fabrication, overhead crane operation, jigging, and efficient manufacturing processes. The ideal candidate will know how to operate press brakes, saws, welders, and know fitting, and finishing processes. This person will be responsible for overseeing staff with an emphasis on teamwork, continuous improvement, safety, quality, and on time delivery. The fab lead must be a motivated leader with good communication skills, common sense, and willingness to learn and try new manufacturing concepts. Qualifications: • A High School diploma or equivalent is preferred., • Bilingual and experience in lean manufacturing are a plus., • High degree of independence and accountability., • Hands-on, self-driven commitment to teamwork., • Detailed oriented individual able to frequently perform multiple tasks at a given time., • Able to independently perform simple calculations and fit up parts/pcs., • Communicates and interacts well with others. Job Duties/Responsibilities: • Coordinate movement of production and team members to meet production schedules., • Ensure efficient and accurate production of all SCT products with the highest quality., • Work proactively to finish jobs based on production schedules and customer deadlines., • Monitor inventory levels of materials and supplies and communicate with Inventory team to ensure availability and timely replenishment., • Has full responsibility for maintenance of all the equipment associated with this job., • Review and follow the work order and best practice requirements., • Work with manager to anticipate and identify departmental bottlenecks and take corrective action., • Read and understand build prints., • Work closely with Install and Paint department managers to meet customer expectations for delivery and quality., • Foster an environment of teamwork, learning and continuous improvement., • Place a strong emphasis on safety requirements., • Comply with all policies and procedures in accordance with our QMS., • Jobs must be completed correctly within the hours quoted., • QC kickbacks/mistakes must be corrected prior to bead blasting, and metrics must show steady month to month decline in returns or kickbacks., • Measurable improvements from each team member within 90 days of identifying issues., • Sustain repeatability on standard builds to maximize profitability., • Production tracker kept up to date with the latest information for techs and sales., • Report daily any mistakes made in the fabrication process and how to prevent it from happening again. “This list of responsibilities, skills, duties, and requirements is not exhaustive. While it is intended to accurately reflect the current role, the company reserves the right to modify, add, or remove job functions and responsibilities as needed.” “This description is not intended to be an exhaustive list of responsibilities, skills, duties, requirements, or working conditions. It reflects the role as it exists today, but the company reserves the right to revise job duties or assign additional tasks as necessary.” Benefits include: paid holidays after the first 90 days of employment, 2 weeks accrued PTO during the first year of employment and 3 weeks accrued PTO during the second year of employment, annual bonuses, growth within the company, overtime opportunities and competitive pay. $25-$35 hourly starting range DOE. New employees will be eligible for Medical, Dental and Vision Insurance benefits the 1st of the month after 30 days of employment. We are a locally owned, small business with a progressive management style.

Job Description Summary: Responsible for programming using MasterCam, creating and editing cutter paths, setting up and operating CNC machines, reading blueprints, and performing precision measurements. This role is responsible for producing high-quality parts according to customer specifications and requires a strong understanding of CNC technology and lean manufacturing principles. Essential Duties and Responsibilities: • Operate CNC machines to produce complex parts and components, • Read and interpret blueprints and technical drawings, • Conduct precision measurements using micrometers and other measuring instruments, • Perform electrical discharge machining (EDM) and other advanced manufacturing processes, • Utilize power tools and hand tools to complete tasks, • Maintain a clean and organized work environment, • Troubleshoot and repair CNC machines and equipment, • Collaborate with other team members to improve manufacturing efficiency and quality, • Implement lean manufacturing techniques to reduce waste and improve productivity, • Proficiency in CNC machining, including experience with Micrometer and Precision measuring instruments, • Familiarity with CAM programming and Electrical discharge machining, • Strong background in Manufacturing and Lean manufacturing principles, • Knowledge of Mastercam software is a plus, • Proven experience as a CNC Machinist or in a related field, • Strong understanding of CNC technology and programming, • Experience with lathe machines and other CNC equipment, • Familiarity with precision measuring instruments and blueprints, • Knowledge of lean manufacturing principles and techniques, • Ability to work independently and as part of a team, • Strong problem-solving skills and attention to detail, • Physical stamina to lift and maneuver heavy equipment and materials, • Ability to work in a fast-paced manufacturing environment Ability to read and write in English, with solid understanding of proper grammar usage, sentence structure with average (or above average) spelling skills. Certificates and Licenses: None Supervisory Responsibilities: None Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical machine shop environment requiring safety glasses and select hearing protection. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to talk and hear. The employee is frequently required to sit and use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus. Job Type: Full-time Benefits: Medical; Dental; Vision; Life; STD; LTD; 401(k) with company match; Paid Time Off Out of state candidates are encouraged to apply. Cinova Medical will provide RELOCATION BONUS. Cinova Medical, Inc. is an EOE AA M/F/Vet/Disability Employer and Drug Free Workplace. Upon hire, Cinova Medical, Inc. uses E-Verify to verify employment eligibility for roles based in the United States.

Job DescriptionSalary: The Weitz Company is hiring a VDC Engineer to join our Denver team! This role will be responsible for various functions on a construction projects related to the design, management, and implementation of VDC systems including modeling and field solution technologies. This exciting role streamlines workflows amongst project teams and enhances VDC utilization on assigned project(s). The Weitz Company has been Building a Better Way since 1855. We are a full-service construction company, general contractor, design-builder, and construction manager with office locations throughout the United States. We believe our employees to be our most valuable asset, and we are committed to growing a diverse and inclusive culture that inspires, motivates, and continuously improves. What Youll Do: What Were Looking For: Experience: • Previous internship experience in a construction role supporting VDC, • LEAN principles experience is a plus Skills: • Excellent written and verbal communication skills, • Strong organizational skills and a high attention to detail, • Ability to exercise independent judgement, • Initiative and strong decision-making capabilities, • Excellent problem-solving skills Technology: • Working knowledge of Autodesk software programs (Revit AutoCAD and Navisworks) and a general understanding of VDC software (Sketchup, Fuzor, Infraworks, Adobe Suite), systems and hardware, • Proficient in basic computer software including Microsoft Word, PowerPoint, Excel, and Outlook, • Ability to learn specific job-related software upon hire What We Offer: • Competitive Pay, • Rewarding Bonus Program, • Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings, • Employer-Paid Short- and Long-Term Disability Programs, • Employer-Paid Life Insurance, • Generous Paid Time Off Provisions, • 401K Retirement Savings Plan with Company Match, • Tuition Reimbursement, • Fully Paid Parental Leave, • Voluntary Products Including: Critical Illness Insurance and Accident Insurance, • Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-basedsubsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce.We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicantswill receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicablestate and federal laws). The Company is a drug and alcohol-free workplace, and background checks are required if applicable.Click here to review our Privacy Notice. #LI-MN1

Job Description We are looking for a Lead Information Security Architect who will be responsible for developing and maintaining a comprehensive information security architecture program and representing information security requirements for all technology solutions and business processes covering multiple technical disciplines, such as systems & networking infrastructure, DevOps, security, business applications, cloud security, and data architecture. The role oversees cybersecurity for our company's digital products, including software, firmware or products that contain code. This includes implementing a product security program designed to address cybersecurity across all stages of the product life cycle. This role identifies and oversees the mitigation of technical and operational threats; analyzes the security, supportability, and feasibility of new technology; and ensures conformance with regulatory guidelines and industry best practices. This position requires an extremely high level of analytical problem-solving skills to diagnose and resolve complex technical issues in addition to superlative process management and communication skills. Note: U.S. citizens and those authorized to work in the U.S. are encouraged to apply. We are unable to sponsor at this time. To be Successful in this Role • Develop an architectural vision to support the continued growth of the product suite, • Working knowledge of Data Security Best Practices: At Rest, In Flight, In Use, • Experience with privacy-enhancing technologies and encryption techniques., • Working knowledge of cloud security architecture strategies, frameworks, and reference models, • Proven ability to develop effective partnerships with senior management and peer organizations. Must be able to explain technical concepts and problems to nontechnical senior executives, • Ability to build Risk Models and analyze security weaknesses in complex technology deployments., • Provide security expertise and direction on projects related to cloud architecture and design, implementation, maintenance, governance, and risk management, • Work with governance teams to establish automated processes and best practices for AWS, Azure IAM policies, roles, identity federation, etc., • Conduct automated (preferred) or manual security validation of cloud templates and/or cloud infrastructure, • Collaborate with business units and corporate partners to ensure they build solutions consistent with the organization's policies, programs, architectural recommendations, and information security standards, • Develop, establish, enforce, and sustain the Information Security Architecture, including standards and guidelines for infrastructure solutions and technologies, integration methodologies and practices, development processes, hardware platforms, and enterprise data design., • Partner with stakeholders in building and implementing a robust, scalable, and agile information security architecture, • Partner with stakeholders in assessing the IT application & infrastructure portfolios today and design and execute the future state strategy to meet business objectives going forward., • Make recommendations on the strategic use of technology for leveraging business results and work with stakeholders to incorporate these recommendations into appropriate roadmaps and life cycle plans., • Anticipate and ensure alignment with long-term business requirements, ensuring identified change is reflected in the appropriate roadmaps, providing thought leadership both internally and externally, • Minimize the number of architectural components and total cost of ownership while maintaining maximum of functional flexibility, reliability, and security., • Must be able to balance the role of strategist with urgency while simultaneously managing and delivering results in a growing and fast-paced environment., • Must demonstrate the ability to manage via influence and have the credibility and interpersonal skills to become respected as a thought leader. Must be capable of articulating pragmatic, sensible, and simple solutions while executing across multiple business and technical perspectives., • Act as a role model for service mentality, building long-term relationships with key internal customers and stakeholders, while remaining receptive to the customer's needs, • Facilitate and steward the documenting of the architecture design and analysis work, including the capture and mapping of the relationships between architecture components. You Will Have • 8+ years’ experience dedicated to information security architecture required with expert knowledge in building defense in-depth reference architecture, • Required industry security certification (e.g., CISSP, CISM, CISA, CCSP, etc.), • Familiarity with information management practices, system development life cycle management, IT services management, agile and lean methodologies, infrastructure, and operations., • Knowledge of business ecosystems, SaaS, infrastructure as a service (IaaS), platform as a service (PaaS), SOA, APIs, open data, microservices, event-driven IT and predictive analytics., • Hands-on experience with Cloud Technologies AWS, Azure & GCP, • Good understanding of security management solutions, including IDS, IPS, SIEM, Vulnerability Scanning, Denial of Service, and Continued Compliance, • Experience with attacks and mitigation methods, with experience working in two or more of the following: Network protocols and secure network design; Operating system internals and hardening (e.g. Windows, Linux, OS X, Android); Web application and browser security; Security assessments and penetration testing; Authentication and access control; Applied cryptography and security protocols; Security monitoring and intrusion detection, Incident response and forensics; Development of security tools, automation or frameworks, • Experience in managing and contributing to incident response, • Extensive experience in developing strategic information security plans, including the development of baseline security standards, information system hardening guides, and information security requirements documentation., • Excellent analytical skills, organizational, time management, and problem-solving skills are essential.is work, including the capture and mapping of the relationships between architecture components.

Job Description Who We Are Enstall is the world’s largest provider of rooftop solar mounting hardware. Solar installers have depended on us to secure more than 3.5 GW of solar annually on residential, commercial and industrial roofs. Our brands in the U.S. include industry leaders IronRidge and PanelClaw. What You'll Do Enstall is seeking a highly skilled and multifaceted Supplier Quality Engineer with the right blend of experience and knowledge to manage and maintain product quality requirements from external suppliers. Key areas of emphasis and responsibilities to include: • Support APQP (Advance Product Quality Planning) activities for all phases of product life cycle., • Understand product application and design requirements & specifications to ensure design will result in repeatable manufacturing/assembly and acceptable quality., • On-board and train new suppliers in key Quality functionality., • Lead FAA (First Article Approval) process through inspection form creation, data review, discrepancy resolution, and approval workflow., • Lead PSIR (Pre-Shipment Inspection Report) process through inspection form creation, data review and analysis, discrepancy resolution, and approval workflow., • Manage supplier deviations and track improvement actions to complete prior to deviation expiration., • Issue SCARs (Supplier Corrective Action Request) as necessary and track open items to closure., • Review and approve ECOs (Engineering Change Orders) for completeness and data accuracy with a focus on DFQ (Design For Quality)., • Perform annual supplier quality audits., • Review, verify, and approve supplier CP (Control Plan) and PFMEA (Process Failure Mode Effects Analysis) documents to align with product specifications and requirements., • Identify, evaluate, recommend & implement required measurement, testing, analysis and other verification mechanisms to ensure that product application & design requirements are being met by suppliers., • Identify, evaluate, recommend, and implement continuous improvement plans for the betterment of the Enstall quality organization., • Take part in new supplier assessments to determine supplier quality capabilities prior to award of business., • Perform any other duties as assigned. What You'll Bring • Bachelor’s Degree in Industrial, Mechanical, Quality, or Manufacturing Engineering, or relevant industry experience., • Ability to accurately interpret and analyze engineering drawings and other technical documentation., • Experience and aptitude with using various instruments including but not limited to the following: micrometers, calipers, gages, and electromechanical testing equipment such as CMM, OMM, etc., • Experience conducting statistical data analysis, root cause analysis, and leading lean activities., • Proven ability to work successfully in a fast-paced, dynamic environment with shifting priorities., • Excellent written/verbal communication skills with ability to present effectively to target audience., • Cloud-based QMS (Quality Management System) experience, along with working knowledge of entire MS-Office suite of applications., • Ability to travel up to 20% of the time, both domestically & internationally., • Demonstrated experience with product & process design for manufacturing & quality. (preferred), • ASQ Certification (Quality Inspector or Quality Technician). (preferred) This is a hybrid position (2-3 days/week in the office, or more when business needs dictate) and will be based in any of our main office locations (North Andover, MA, Hayward, CA, or Phoenix, AZ). What We’ll Offer We offer competitive compensation determined by each individual's relevant experience, skills, education and location. We anticipate the base salary for this position to be between $85,000 and $105,000 annually, if located in the San Francisco Bay Area market. In addition to base salary, Enstall employees are eligible for either an annual bonus or commission, depending on their position. In addition to a competitive benefit package, we offer team members perks such as paid time off (PTO), a long-term incentive plan, 401(k) match, development opportunities, educational assistance, 12 observed company holidays, paid parental leave, and a collaborative, inclusive culture just to name a few! Who We Hire Enstall is a global organization and places high value on creating a diverse and inclusive workforce, providing equal opportunity for all applicants and staff. All qualified applicants for employment will be considered without regard to race, color, sex, gender identity, gender expression, religion, age, national origin or ancestry, citizenship, physical or mental disability, medical condition, family care status, marital status, domestic partner status, sexual orientation, genetic information, military or veteran status, or any other basis protected by federal, state, or local laws. If you are unable to submit your application because of incompatible assistive technology or a disability, please contact us at or by phone at 510-278-9353. Enstall will reasonably accommodate qualified individuals with disabilities to the extent required by applicable law.

Job DescriptionJob Title: Advanced Sourcing Engineer – Mechanical Fabrication & Enclosures Location: Goodyear, AZ Department: New Product Introduction (NPI) Reports To: NPI Director Employment Type: Full-Time | Exempt About GTI Energy GTI Energy—a division of GTI Fabrication—is a leader in industrial modular fabrication, serving energy, defense, and heavy industrial markets. With manufacturing operations in Arizona and New York, GTI specializes in high-volume, mission-critical systems such as modular data centers, enclosed battery systems, and energy storage devices. As we expand into more advanced enclosure and fabrication programs, we are seeking an Advanced Sourcing Engineer (ASE) to bridge the gap between engineering design and supply chain execution—driving supplier readiness, cost optimization, and manufacturability for our next-generation product lines. Position Overview The Advanced Sourcing Engineer plays a critical role in connecting the product design process with supplier capabilities. This position will lead sourcing strategy, supplier development, and cost optimization for mechanical fabrication and enclosure systems, ensuring all materials and assemblies meet GTI’s quality, cost, and delivery standards. The ideal candidate brings a strong understanding of metal fabrication processes, design-for-manufacturability (DFM), and supplier qualification. This individual will partner cross-functionally with Engineering, Quality, Manufacturing, and Supply Chain to deliver world-class sourcing solutions during new product introduction (NPI) and ongoing production. Key ResponsibilitiesEarly Engagement & Sourcing Strategy * Partner with Engineering and Program Management early in the concept and design phases to ensure supplier input drives design feasibility and manufacturability. * Influence design decisions based on fabrication feasibility, material availability, and total cost of ownership. * Develop comprehensive sourcing strategies that balance capability, cost, risk, and regional manufacturing alignment. * Provide early cost modeling, should-cost analysis, and supply risk assessments to inform design-to-cost initiatives. Supplier Development & Qualification * Identify and qualify suppliers specializing in mechanical fabrication—including sheet metal, welded assemblies, frames, and precision-machined components. * Conduct supplier technical reviews, process capability audits, and prototype builds. * Collaborate with Supplier Quality and Manufacturing Engineering to ensure supplier readiness for production scale-up. * Establish clear metrics and readiness plans for suppliers entering NPI and full production phases. Program & Execution Support * Manage RFQ processes and supplier selection activities for new programs, ensuring alignment with GTI’s cost, quality, and schedule objectives. * Drive sourcing deliverables through NPI phase-gate milestones, ensuring PPAP/FAI documentation and readiness criteria are met. * Partner with internal manufacturing and external contract manufacturers to coordinate build readiness and material flow. * Develop and implement risk mitigation plans to ensure continuity of supply and timely execution of production launches. Continuous Improvement & Cost Optimization * Lead cost-reduction initiatives through value engineering, alternative process/material selection, and supplier consolidation. * Support ongoing standardization and commonization efforts across mechanical and enclosure programs. * Contribute to supplier performance management and post-launch cost-down initiatives. * Collaborate with cross-functional teams to implement lessons learned and best practices from prior NPI cycles. Required Qualifications * Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering (or related technical discipline). * 5+ years of experience in sourcing, supplier development, or manufacturing engineering within mechanical or metal fabrication environments. * Strong knowledge of fabrication processes: laser cutting, forming, machining, welding, coating, and mechanical assembly. * Proficient in interpreting 3D CAD models and mechanical drawings (GD&T). * Experience with cost modeling, make-vs-buy analysis, and DFM/DFA collaboration with design teams. * Proven success engaging suppliers during prototype and NPI development phases. * Familiarity with quality systems such as ISO 9001, AS9100, or ISO 13485. Preferred Qualifications * Experience with supplier transitions, localization, or nearshoring strategies. * Exposure to modular fabrication, defense, or industrial enclosure systems. * Background working within structured NPI or Phase-Gate environments. * Certification in Lean Manufacturing, Six Sigma, or Value Analysis/Value Engineering (VAVE). Core Competencies * Strategic sourcing and supply chain acumen * Technical fluency in mechanical fabrication and assembly processes * Strong analytical, cost modeling, and negotiation capabilities * Excellent communication and cross-functional collaboration * Detail-oriented project management and execution discipline Performance Metrics * Supplier qualification and sourcing readiness by NPI gate milestones * Achievement of target cost, quality, and delivery metrics * Reduction in sourcing risk, lead time, and supplier variability * Demonstrated supplier performance improvement and post-launch cost savings Why Join GTI * Join a fast-growing company shaping the future of modular fabrication and energy systems. * Be part of a highly collaborative engineering and operations culture. * Lead sourcing initiatives that directly impact GTI’s growth and competitiveness. * Competitive salary, benefits, and professional development opportunities. Keywords Advanced Sourcing Engineer, Mechanical Fabrication, Enclosures, Supplier Development, NPI, Value Engineering, Sheet Metal, Weldments, Supply Chain Engineering, Cost Modeling, DFM, DFMA, Modular Fabrication, Industrial Manufacturing, Phoenix AZ, Goodyear AZ, Strategic Sourcing, Supplier Qualification, Continuous Improvement, Lean Manufacturing, Six Sigma.

Job Description About Us: Hey there, we’re The Husband & Wife Law Team, Arizona’s most energetic, people-first, do-what’s-right law firm! For nearly 30 years, we’ve been helping real people through real challenges after life-changing accidents — not just winning cases, but changing lives. We’re not your typical law firm. We cheer loud, fight hard, and treat every client like family. Our office vibe? High-energy, full of heart, and built on teamwork, compassion, and serious legal firepower. If you’ve got the skills, the grit, and the passion to stand up for people when they need it most — keep reading. This could be your next big career win. About the Role: • We’re on the hunt for a rockstar Personal Injury Attorney ready to handle our most complex, high-stakes cases — the kind that change lives., • Think: catastrophic injuries, traumatic brain injuries, spinal cord damage, wrongful death, and other major-impact cases., • You’ll team up with one of our most seasoned trial attorneys, dig deep into the details, build airtight cases, and bring your A-game to every fight., • Taking on catastrophic injury and wrongful death cases that matter — and winning them., • Teaming up with senior attorneys to develop killer case strategies., • Rolling up your sleeves for deep-dive legal research, discovery, depositions, and expert interviews., • Crafting persuasive motions and briefs that command attention., • Being the rock your clients can lean on — keeping them informed, cared for, and confident every step of the way., • Outworking and out-preparing the opposition — always., • Licensed attorney with 5+ years of litigation experience (personal injury, med mal, or product liability preferred)., • A relentless advocate who can handle high-stakes pressure with grace and grit., • Master of research, writing, and storytelling — because great lawyering is great storytelling., • Fierce attention to detail and zero tolerance for “good enough.”, • A heart for helping people and a mind that never stops learning., • Tackled complex cases that required serious strategy and creative problem-solving., • Thrived in a fast-paced, collaborative, slightly loud (in a good way) environment. At The Husband & Wife Law Team, you’re not clocking in for a job — you’re joining a mission. We’ve been named a Certified Great Place to Work® five years running and a Top Workplace since 2022. Why? Because we walk the talk. We celebrate wins — big and small. We show up for each other and our community. We believe great work starts with great people — and we treat ours like gold. What We Offer: • Competitive pay with growth potential (because your talent deserves it), • Health, dental, vision, and life insurance, • 401(k) with company matching, • Paid time off & paid family leave If you’re ready to practice law with passion, purpose, and a little personality — we want to meet you. Come make a difference, fight for what’s right, and love the team you do it with. Learn more about our values, culture, and how we give back at: husbandandwifelawteam.com/join-our-team

Job Description100% Onsite. Interviews will be on site. Position may be extended, but as of right now, it is seasonal. Proficient in the use of a PC in a Windows environment; in the use of the Internet; in the use of Google Suite applications such as Gmail, Sheets, Docs, and DriveKeyboarding/typing at least 40 wpm and 10-key skillSkilled in the customer service technique of conflict de-escalation and resolution AbilitiesAbility to clear a comprehensive background and clearance process that includes an Arizona tax compliance verification, and a criminal background check through the FBI via level one fingerprint clearance through the Arizona Department of Public Safety Ability to work with a high degree of autonomy and also participate collaboratively as part of a team Ability to work in a confidential manner, ensuring information is shared with internal and external individuals in an appropriate mannerAbility to understand and solve problems by applying basic analytical skills to include collecting all the relevant information and data needed to address the problem; organizing, classifying and synthesizing the data into fundamental issues; from the information, identifying the most probable causes of the problem; reducing the information down into manageable components; identifying the logical outcomes from the analyses of the data collected; and, identifying the options and solutions for addressing the problems analyzed Ability to learn and apply LEAN concepts, principles, and tools Willingness and ability to embody ADOR’s core values of Do the Right Thing, Commit to Excellence, and Care About One Another Selective PreferencesOne or more years working in a high production environmentPrevious experience with Continuous Improvement, Six Sigma and/or Lean Previous experience in customer service emphasizing on professionally and courteously serving customers in a fast paced environmentBilingual in English and Spanish Requirements (If these are not shown on the candidate’s resume, they will be rejected).2+ years of experience in a customer service role1+ year of experience in a high product environmentExperience with cash handling Required Skills2 Years of Customer Service Experience1+ Years of Experience in a High Production EnvironmentCash Handling Preferred SkillsBilingual

This position will be responsible for the following: • Drives program / cross platform product delivery, demonstrating leadership coupled with technical expertise across domains and the corresponding business domain knowledge, • Entire lifecycle from initiation to delivery:, • Partners with LPM, Product and Engineering owners for early engagement and prioritization process., • Drives Pre-Program Increment (PI) planning meetings with leadership, product management, delivery teams and Business Partners., • Cross Platform Integrated Release Planning and status reporting, • E2E Test Management (test data set up, test plan creation, reporting on testing status, etc.), • Drive the Solutioning and architecture with engineering teams ., • Partners with Product Managers, New Product Development, Business Partners and Architects to help assure strategy, vision and road map alignment and execution, • Create data-driven insights into the delivery and execution of the program through the use of automation & metrics., • Manages impediments, risks, dependencies and resourcing needs across stakeholders and senior leadership as appropriate., • Support and encourage innovation through continuous exploration., • Aggregates and drives End-to-End Program Increment (PI) objectives into Epic/Cross-Train Release objectives to ensure successful delivery., • Track and measure capability and epic execution, • Inform or co-develop architecture and process flows to ensure end to end technology product solutions, • Understand the program’s technical platforms and applications, • Coach leaders, teams in technology and product management in Lean-Agile practices and mindsets, • Live the Agile and SAFe Values & Principles, • Encourage diversity of thought and demonstrate an open mindset., • Foster a culture of trust and leadership in others., • Champion a learning culture to drive continuous improvements and standardization., • Respectfully and purposefully challenge the status quo, • Inspires collaboration and quality practices between system architects & Agile teams and product teams, • Ensures compliance with SDLC standards across the program, • Ensures data integrity for the program within the Agile Management tools Qualifications for this Position are as follows: • 8+ years relevant Program and/or Project Management experience, • Experience with design and coding across one or more platforms and languages is ideal, • Experience facilitating Agile, Scrum, or other rapid application development teams to deliver solutions, • Current/active PMI-ACP, PMP, SPC or SA certification a plus, • Additional Agile certifications a plus, • BS or MS degree in computer science or equivalent working experience is preferred

Job Description Position Summary: We are seeking a highly experienced and connected Meat Processing Sales Rep to drive growth through direct sales of fresh and frozen chicken products. This is not just an account management role. The MPSR is a proven dealmaker with existing relationships, a strong network, and a track record of closing large-volume protein deals. The ideal candidate will have experience selling to foodservice distributors, national brokers, and multi-unit restaurant operators and will be expected to contribute immediate value through their active customer base. Who We Are: Angie's Food Concepts is on a mission to make “luxury” foods affordable! We are vertically integrated, operationally lean, and creatively bold, bringing premium ingredients like Maine lobster, Antibiotic and Hormone-Free Chicken, and USDA prime steak to the drive-thru at unbeatable speed and price. We’re looking for a seasoned Meat Processing Sales Rep who can help us scale as we expand into new markets and open new stores. The Meat Processing Sales Rep has the following primary responsibilities: • Bring existing customers or contacts to the table—introducing new revenue and/or sourcing partnerships from day one, • Secure reliable chicken supply partners to support Angie’s expansion strategy, • Open and grow sales channels with distributors, brokers, and restaurant chains, • Work directly with our culinary and supply chain teams to align procurement with product development and operational targets, • Identify and respond to market shifts in pricing, availability, and customer needs, • A closer with 5+ years of experience in chicken/protein sales, • Well-connected in the foodservice, broker, and/or QSR distribution ecosystem, • Someone who thrives in a fast-paced, startup-style environment where speed and results matter, • Confident negotiating volume deals and forging supply agreements, • Knowledgeable about commodity markets, poultry specs, and protein production cycles, • Experience with QSR restaurant chains or emerging food brands a plus, • Competitive salary, • Opportunities for professional development and career advancement., • Flexible time off., • Health, dental, and vision insurance., • Holiday pay., • Free shift meal. The duties and responsibilities described are not a comprehensive list and additional tasks may be assigned.

As a Project Engineer at Graycor, you will enroll in our Engineering Mentoring Program designed to expose you with the critical hands-on experience necessary to build your successful career in construction. You will receive ongoing, specialized one-on-one training, coaching and mentoring on a variety of challenging and interesting project assignments, and a full rotation between departments. You will be actively involved in your career development, making self-assessments of your progress against established core competencies. Engineers will typically spend 24 months in the Engineer Mentoring Program before advancing to a new position with Graycor. AS A PROJECT ENGINEER, YOU WILL GAIN EXPERIENCE IN THE FOLLOWING AREAS: Project Management/ Project Controls: • Assist Project Manager and Superintendent in the efficient control and management of the project, while ensuring safety and quality programs are being executed on the project site., • Develop and maintain the critical path project schedule, including ongoing revisions. Assist the Project Manager and/or Superintendent in the preparation of short-term look-ahead schedules and the application of Lean Construction techniques., • Maintain project documentation and expedite to the Owner, Architect, and Engineers for approval. Develop and maintain a thorough understanding of the provisions and requirements of all contract documents, including plans, specifications, owner’s contract, subcontracts and purchase orders., • Assist in the procurement of equipment and materials, and track and expedite their delivery., • Assist in the preparation of estimates and quotations to obtain project work. Assist the Project Manager and/or Estimator in bid preparation, subcontractor/vendor solicitation, evaluation and award. TO BE SUCCESSFUL IN THE GRAYCOR ENGINEERING MENTORING PROGRAM, YOU WILL NEED: • Bachelor’s degree in construction management, engineering, or other relevant technical discipline., • 0-3 years of relevant construction internship or post-undergraduate experience., • The ability to travel extensively and temporarily reside at the project site for extended periods of time, with travel home provided every other weekend. Travel subsistence pay and travel incentive bonuses may apply., • Ambition to grow professionally and acquire new knowledge and skills. Our most successful Engineers are motivated to succeed and are passionate about construction across a variety of projects. Our typical project portfolio includes retail mall development, entertainment/ recreational, hospitality/lodging, office, logistics/distribution and cold storage, manufacturing, and green/ LEED building industries., • The fortitude to juggle competing priorities in a fast-paced environment. Multi-tasking with a sense of urgency while maintaining strong attention to detail and accuracy is crucial., • Effective communication skills, with the ability to interact professionally with managers, co-workers, subcontractors, and construction craft employees., • Problem solving and critical thinking skills., • Working knowledge of MS Office Suite. Additional basic knowledge of scheduling, estimating and takeoff software is a plus. We use Primavera P6, WinEst and On-Screen Takeoff.

Senior Associate, Capital One Concierge, Delivery Lead - Velocity Black. Within Capital One, the Velocity Black team is a leading digital concierge company that delivers travel, entertainment, shopping and dining offerings to consumers globally. Has a lean-in attitude and is willing to reach out to

Job Description Harder Mechanical is one of the nation’s largest mechanical contractors with an outstanding reputation for working safely, meeting tough schedules, and delivering quality projects. Based in Portland Oregon, we work primarily in the 11-western states with regional offices in Reno, NV; Phoenix, AZ; Los Angeles, CA; Richmond, CA; Salt Lake City, UT. As a Project Manager, you will be working in one of these market sectors: Commercial Buildings (healthcare, higher education, mission critical, and retail), Advanced Technology (semiconductor manufacturing, renewable energy), or Industrial (pulp and paper manufacturing). Successful projects do not complete themselves. Our team of curious and passionate people build on Harder's reputation every day through their actions. We offer professional development opportunities, industry-leading benefits, and the chance to work on projects that will change the built environment forever. Find out more at . What you’ll be doing: You will be responsible for oversight of planning, scheduling, and executing your assigned project. You will coordinate with your project team and field labor to ensure the work is completed safely, on schedule, and up to Harder Mechanical’s quality standards. The project manager is responsible for the project budget and maintaining a strong relationship with the client. This position is a mid-level to senior role that is fundamental in supporting each market sector that Harder works in. Project Managers at Harder perform the following daily tasks: • Fully understand every aspect of the project scope, • Build strong relationship with the client, • Proactively engage in open and honest communication with the client, • Oversee the budget and schedule and provide ongoing progress updates to all stakeholders, • Manage all team members, from project engineers to superintendents to administrative support, • Assume responsibility for successful project outcomes including schedule completion, adherence to budget, and customer satisfaction, • Proficient in Microsoft Office & Bluebeam – intermediate skills in Excel, • Advanced knowledge of mechanical and plumbing systems, • Ability to communicate with a broad spectrum of people including suppliers, field crews, designers, and owners, • Self-starter, motivated and takes initiative, • Organized and productive, • Strong time management skills and ability to prioritize tasks on an ongoing basis, • Relentless commitment to teamwork and client satisfaction, • Interest in LEAN construction principles, • Ability to travel to other regions to gain exposure to additional markets and industries, • Must have valid driver license, • 10+ years of project management experience, preferably with a focus on mechanical systems, • Competitive salary, • Comprehensive medical, dental, and vision benefits – 100% of employee premiums are paid by the company, • Generous retirement package includes: 10% retirement contribution made by the company and a company match up to 2% of your annual salary, • Profit sharing, • Discretionary annual bonus, • Paid vacation and holidays, • Harder University training and development, as well as other paid professional development opportunities This position is salaried. No recruiters. No phone calls, please. About Harder Harder Mechanical Contractors is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, genetic information, veteran status, or any other characteristic protected by federal, state or local nondiscrimination laws. Our hiring policy reflects and affirms Harder’s commitment to the principles of fair employment. Harder does not discriminate regarding the terms and conditions of employment based on any characteristic protected by federal, state or local nondiscrimination laws. It is Harder’s policy to maintain a drug and alcohol-free work environment. Employment offers are conditional upon successfully passing a drug and alcohol test, background checks, reference checks, and as required by law, regardless of citizenship or national origin, documented proof of authorization to work in the United States. Powered by JazzHR hBpuUZOduT

Job Description Harder Mechanical is one of the nation’s largest mechanical contractors with an outstanding reputation for working safely, meeting tough schedules, and delivering quality projects. Based in Portland Oregon, we work primarily in the 11-western states with regional offices in Reno, NV; Phoenix, AZ; Los Angeles, CA; Richmond, CA; Salt Lake City, UT. As a Project Manager for our sheet metal division, you will be working in one of these market sectors: Commercial Buildings (healthcare, higher education, mission critical, and retail), Advanced Technology (semiconductor manufacturing, renewable energy), or Industrial (pulp and paper manufacturing). Harder has an immediate need for a sheet metal project manager with experience in mechanical systems and sheet metal to join our team in Phoenix, AZ. Successful projects do not complete themselves. Our team of curious and passionate people build on Harder's reputation every day through their actions. We offer professional development opportunities, industry-leading benefits, and the chance to work on projects that will change the built environment forever. Find out more at . What you’ll be doing: You are responsible for oversight of the planning, scheduling, and executing your assigned project. You will coordinate with your project team and field labor to ensure the work is completed safety, on schedule, and up to Harder Mechanical’s quality standards. You are responsible for the project budget and maintaining a strong relationship with the client. Project Managers at Harder perform the following daily tasks: • Fully understand every aspect of the project scope, • Build strong relationship with the client, • Proactively engage in open and honest communication with the client, • Oversee the budget and schedule and provide ongoing progress updates to all stakeholders, • Manage all team members, from project engineers to superintendents to administrative support, • Assume responsibility for successful project outcomes including schedule completion, adherence to budget, and customer satisfaction, • Basic computer competency, including Microsoft Office and Bluebeam, • Strong time management skills and ability to prioritize tasks on an ongoing basis, • Relentless commitment to teamwork and client satisfaction, • Ability to communicate with a broad spectrum of people including suppliers, field crews, designers, and owners, • Interest in LEAN principles, • Passion for ongoing learning and keeping up with industry trends, • 10+ years of project management experience, preferably with a focus on mechanical systems, • Bachelor’s Degree in Engineering or Construction Management, • Advanced knowledge of mechanical and plumbing systems, • Competitive salary, • Comprehensive medical, dental, and vision benefits – 100% of employee premiums are paid by the company, • Generous retirement package includes: 10% retirement contribution made by the company and a company match up to 2% of your annual salary, • Profit sharing, • Discretionary annual bonus, • Paid vacation and holidays, • Harder University training and development, as well as other paid professional development opportunities This position is salaried. No recruiters. No phone calls, please. About Harder Harder Mechanical Contractors is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, genetic information, veteran status, or any other characteristic protected by federal, state or local nondiscrimination laws. Our hiring policy reflects and affirms Harder’s commitment to the principles of fair employment. Harder does not discriminate regarding the terms and conditions of employment based on any characteristic protected by federal, state or local nondiscrimination laws. It is Harder’s policy to maintain a drug and alcohol-free work environment. Employment offers are conditional upon successfully passing a drug and alcohol test, background checks, reference checks, and as required by law, regardless of citizenship or national origin, documented proof of authorization to work in the United States. Powered by JazzHR V53IV81wT2

Job Description Project Manager Opportunity (Job ID: 7712)Location Requirements: Must be local to Arizona (AZ) currently. The first week is in-office, followed by remote work. Onsite presence required once a month or as needed. Position is based in Phoenix, AZ.Contract Details: • Duration: Up to 9 months, with the option for extension., • Your current resume, • Your hourly rateAbout the RoleImagine designing world-class online educational experiences for hundreds of thousands of K-12 students, teachers, parents, and school staff in Arizona. The Arizona Department of Education (ADE) is creating innovative educational web applications, and you can contribute to our success by crafting top-tier user interfaces using cutting-edge web technologies.Position SummaryThe Arizona Department of Education (ADE) IT division is seeking a self-driven IT Project Manager who thrives in a fast-paced, dynamic environment built on collaboration and partnership with business stakeholders. The ideal candidate brings extensive technical expertise and a proven track record of success in large, enterprise-wide projects, focusing on Software Development, Data Visualization, and Vendor Management.This role demands a calm, composed professional with exceptional listening skills, ready to navigate unexpected changes driven by government policy shifts. You'll work independently with minimal oversight, delivering innovative solutions under tight timelines.Required Skills, • Comprehensive knowledge of IT project management principles., • In-depth understanding of the Software Development Life Cycle (SDLC)., • Proficiency in Agile principles, with the ability to apply them for flexible, collaborative project execution., • Strong technical and solution-oriented mindset to adapt to frequent changes., • Expertise in defining missions, goals, tasks, and resources, while translating objectives into actionable plans., • Experience in efficient budget and resource management, balancing financial considerations., • Excellent interpersonal and communication skills for transparent stakeholder engagement., • Skilled in identifying and implementing process improvements to enhance efficiency., • Proficient in conveying project updates and insights to stakeholders., • Strong prioritization and planning abilities, considering objectives and constraints., • Ability to develop data strategies aligned with organizational goals., • Leadership skills to manage data and Business Intelligence (BI) teams., • Capability to extract insights from simple datasets as needed., • Effective communication with non-technical stakeholders.Minimum Qualifications, • 5+ years of experience as a Project Manager in medium to large software development projects., • Bachelor's degree (or equivalent).Preferred Skills & Certifications, • Experience with Power BI or Tableau., • Agile Certification., • Lean Six Sigma Certification., • PMP Certification.

Job Description Amphenol is one of the world's largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market including Automotive, Broadband Communications, Commercial Aerospace, Defense, Industrial, Information Technology and Data Communications, Mobile Devices and Mobile Networks. Power Solutions Group, a business unit of Amphenol, is the market leader for power electrical connectors and cables for the Telecom/Datacom Market serving (Storage, Servers, Networks, etc.). We are currently seeking an Operations Project Manager to join our team . RESPONSIBILITIES: • As Operations Project Manager, you will be responsible for overall profitable capacity management including productivity, supply chain, lead-time, cost reduction and quality assurance through the implementation of effective strategies, methods, practices and adaptability., • You need to manage the big picture and identify potential problems and points of friction and find solutions to maximize efficiency and revenue. The key to the role is to drive with a continuous improvement mindset and skills to best align and optimize financial/operational objectives against customer/market expectations (management of cost/price/profitability),, • In this role, you will work across many functional teams and stakeholders such as engineering, product management, finance, purchasing, product marketing, sales and our customers. You will partner closely with Site Operations Leaders, Program Managers and Engineering Teams to drive solutions and deliver against demanding customer requirements including schedules, ramp and scale., • You will also lead efforts to proactively address quality issues in collaboration with internal teams and suppliers to uphold high standards across operations. A critical part of your responsibilities will include managing customer audit-overseeing preparation and execution to ensure full compliance with documentation and process standards. Additionally, you will coordinate and execute geo-diversity and product transfer projects, working to minimize disruption and maintain operational continuity across global sites., • BS or equivalent degree in Operations Management or a related/equivalent technical discipline, • 5+ years' experience in a manufacturing environment in operations management, capacity management, supply chain planning and cost and budget control, preferably in the interconnect industry, • Manufacturing Process Knowledge: Able to analyze manufacturing processes toward optimization using continuous process improvement tools (i.e., Six Sigma and Lean), • Creativity, adaptability, and strong project management to in a rapidly changing, multi-tasking environment., • Solid presentation, interpersonal and communication skills, with the ability to interact well with customers, • Financial and Analytical Aptitude: Ability to interpret and analyze data, information and financial statements, understand costing methodologies and various methods of cost/benefit analysis., • Frequent Travel to Asia/Mexico Fluent Spanish speaker with regular travel to Mexicali, Mexico, contributing to operational expansion and strategic growth." Amphenol Corporation is proud of our reputation as an excellent employer. Our focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, can positively impact the business. Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origins. For additional company information please visit our website at

Job Description Harder Mechanical is one of the nation’s largest mechanical contractors with an outstanding reputation for working safely, meeting tough schedules, and delivering quality projects. Based in Portland Oregon, we work primarily in the 11-western states with regional offices in Reno, NV; Phoenix, AZ; Richmond, CA and Salt Lake City, UT. As a Commercial Project Manager, you will be working on the construction of process piping, plumbing, and sheet metal work in Healthcare, Higher Education, Mission Critical, and other commercial projects. Successful projects do not complete themselves. Our team of curious and passionate people build on Harder's reputation every day through their actions. We offer professional development opportunities, industry-leading benefits, and the chance to work on projects that will change the built environment forever. Find out more at . What you’ll be doing: You are responsible for oversight of the planning, scheduling, and executing your assigned project. You will coordinate with your project team and field labor to ensure the work is completed safety, on schedule, and up to Harder Mechanical’s quality standards. You are responsible for the project budget and maintaining a strong relationship with the client. Commercial Project Managers at Harder perform the following daily tasks: • Fully understand every aspect of the project scope, • Build strong relationship with the client, • Proactively engage in open and honest communication with the client, • Oversee the budget and schedule and provide ongoing progress updates to all stakeholders, • Manage all team members, from project engineers to superintendents to administrative support, • Assume responsibility for successful project outcomes including schedule completion, adherence to budget, and customer satisfaction, • Basic computer competency, including Microsoft Office and Bluebeam, • Strong time management skills and ability to prioritize tasks on an ongoing basis, • Relentless commitment to teamwork and client satisfaction, • Ability to communicate with a broad spectrum of people including suppliers, field crews, designers, and owners, • Interest in LEAN principles, • Passion for ongoing learning and keeping up with industry trends, • 10+ years of project management experience, preferably with a focus on mechanical systems, • Bachelor’s Degree in Engineering or Construction Management, • Advanced knowledge of mechanical and plumbing systems, • Competitive salary, • Comprehensive medical, dental, and vision benefits – 100% of employee premiums are paid by the company, • Generous retirement package includes: 10% retirement contribution made by the company and a company match up to 2% of your annual salary, • Profit sharing, • Discretionary annual bonus, • Paid vacation and holidays, • Harder University training and development, as well as other paid professional development opportunities This position is salaried. No recruiters. No phone calls, please. About Harder Harder Mechanical Contractors is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, genetic information, veteran status, or any other characteristic protected by federal, state or local nondiscrimination laws. Our hiring policy reflects and affirms Harder’s commitment to the principles of fair employment. Harder does not discriminate regarding the terms and conditions of employment based on any characteristic protected by federal, state or local nondiscrimination laws. It is Harder’s policy to maintain a drug and alcohol-free work environment. Employment offers are conditional upon successfully passing a drug and alcohol test, background checks, reference checks, and as required by law, regardless of citizenship or national origin, documented proof of authorization to work in the United States. Powered by JazzHR eGFvgIMyxG

Minimum three (3) months related experience in a warehouse environment; or any equivalent combination of acceptable training, education, and experience. Prior experience operating warehouse equipment, such as forklift, pallet jack and cherry picker helpful. You will be operating material handling eq

Job DescriptionJob Title: Project Executive - Data Center/Mission Critical Location: Phoenix, AZ - Traveling Job Summary We are seeking a results-driven Project Executive with deep expertise in data center construction to lead large-scale, mission-critical projects from concept to closeout. As a General Contractor, you will oversee all phases of construction, ensuring alignment with financial, technical, and quality goals. This role demands strategic leadership, operational excellence, and a strong command of MEP systems and commissioning protocols unique to data center environments. Key Responsibilities • Lead the full lifecycle of data center construction projects — from preconstruction through commissioning and turnover, • Serve as the primary client interface, ensuring clear communication, satisfaction, and alignment of expectations, • Review and approve contracts, scopes of work, budgets, and schedules; proactively identify and mitigate risks, • Drive cost control and forecasting practices to maintain financial health and meet margin targets, • Oversee quality assurance programs to ensure compliance with client specs and industry standards, • Manage project risk and change control processes to address scope, schedule, and cost impacts, • Enforce safety protocols across all job sites in compliance with OSHA and company standards, • Optimize workforce planning, including subcontractor coordination and self-perform labor deployment, • Lead vendor management including prequalification, procurement, performance tracking, and compliance, • Apply deep knowledge of data center infrastructure — including power, cooling, redundancy, and commissioning standards — to guide project decisions, • Implement best-in-class project management tools and methodologies (Lean, BIM, Procore, etc.) to ensure consistency and efficiencyRequired Qualifications, • Bachelor’s degree in Construction Management, Engineering, or related field (advanced degree preferred), • 10+ years of construction management experience, with 5+ years in data center or mission-critical environments, • Proven success managing multi-million-dollar projects with complex MEP and commissioning requirements, • Strong understanding of prefabrication, modular assembly, and integrated systems testing (IST), • Exceptional leadership, negotiation, and communication skills, • Proficiency in project management software (Procore, Primavera P6, MS Project, or similar), • PMP, CCM, or similar certification is a plusCore Competencies, • Cost Accounting, • Industry Knowledge – Data Center Design & Construction, • Contract Review and Recommendations, • Project Risk and Change Management, • Quality Management and Assurance, • Workforce Planning, • Occupational Health and Safety, • Processes, Methodologies and Tools, • Vendor Management Yates Construction provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal and state law requirements. Yates complies with applicable state and local laws governing nondiscrimination in employment in every location where the company has facilities. About Yates Construction Ranked among the top commercial and industrial construction companies in the country by Engineering News-Record, Yates Construction is family-owned and provides a wide range of construction and building services. Incorporated in 1964 by William G. Yates Jr., we have steadily grown to become one of the top commercial and industrial construction companies in the nation. We are financially sound with a significant bonding capacity as well as vast personnel and equipment resources. Our portfolio includes commercial and industrial projects from various sectors including arts and culture, civil, commercial, education, entertainment and gaming, federal, healthcare, hospitality, manufacturing, municipal, retail, and technology. We work hard to understand our client’s business needs and continually look for opportunities to provide additional value to our clients and their projects. Our client relationships are the foundation of our success, and our primary goal is to help each of our clients achieve their vision. We do this by carefully managing the details and complexities of each project and communicating constantly with all team members. Yates Construction provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal and state law requirements. Yates complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities.

Job Summary: Mercury Systems is seeking a Manufacturing Engineer to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products. In this role, you will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. Your technical expertise will play a critical role in the development and delivery of high quality, reliable, and technologically advanced products that meet stringent industry and customer standards. Job Responsibilities: \n • Design and develop manufacturing processes, procedures, and work instructions to meet product specifications and quality standards\n, • Identify and implement improvements to enhance efficiency, productivity, and safety\n, • Evaluate manufacturing equipment and technologies; recommend suitable options and oversee integration into production lines\n, • Ensure equipment meets industry standards, safety regulations, and customer requirements\n, • Lead and participate in Lean Manufacturing and Six Sigma initiatives\n, • Identify areas for improvement and implement process enhancements to reduce costs, eliminate waste, and improve quality\n, • Collaborate with the quality team to establish and maintain quality control procedures, including inspection and testing methods\n, • Resolve production-related quality issues and implement preventive measures to ensure compliance with specifications\n, • Coordinate with suppliers to ensure timely availability of materials, components, and equipment\n, • Evaluate supplier capabilities and performance to support production schedules and quality requirements\n, • Prepare and maintain accurate documentation, including process specifications, standard operating procedures, and engineering change orders\n, • Generate reports on key performance indicators, production metrics, and improvement initiatives.\n, • Ensure compliance with safety regulations and industry standards\n, • Identify potential hazards and implement measures to mitigate risks and promote a safe working environment\n\n Required Qualifications: \n • Bachelor's degree in manufacturing engineering, industrial Engineering, mechanical Engineering, or a related field\n, • Typically requires a minimum of 2-4 years of manufacturing experience, preferably in the defense or aerospace industry\n, • Strong knowledge of manufacturing processes, equipment, and technologies, including CNC machining, additive manufacturing, assembly, and testing\n, • Familiarity with industry standards and regulations such as AS9100, ITAR, and NADCAP\n, • Proficiency in CAD/CAM software for process development and optimization\n, • Experience with Lean Manufacturing, Six Sigma, or other continuous improvement methodologies\n, • Excellent problem-solving skills with the ability to analyze and interpret complex data\n, • Ability to thrive in a fast-paced, dynamic environment and adapt to shifting priorities and deadlines\n\n Preferred Qualifications: \n • Lean Six Sigma Black Belt certification\n, • Experience with FactoryLogix\n, • Hands on experience with server assembly\n\n "This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government." Job Details Fulltime Equivalent Job Grade Range for this Position:• $65,200.00 - $130,400.00 annual salary for in-office or hybrid employees in FL, GA, IN, AZ, AL, MD or TX, and all remote employees • $73,000.00 - $146,000.00 annual salary for in-office or hybrid employees in VA, CA, NH or MA, • $76,900.00 - $153,900.00 annual salary for in-office or hybrid employees in NJ #LI-RJ1 Why should you join Mercury Systems? Mercury Systems is a technology company that makes the world a safer, more secure place. We push processing power to the tactical edge, making the latest commercial technologies profoundly more accessible for today's most challenging aerospace and defense missions. From silicon to system scale, Mercury enables customers to accelerate innovation and turn data into decision superiority. Headquartered in Andover, Massachusetts, Mercury employs more than 2,300 people in 24 locations worldwide. To learn more, visit mrcy.com Our Culture We are committed to making Mercury a great place to work, no matter where our employees are located. We offer a casual and enjoyable atmosphere that allows employees to learn and grow. We help and care for one another and work as one to achieve results for us and for our customers. We value communication and transparency, and strive to foster two-way dialogue at all levels of the organization. We are committed to lifelong learning, offering comprehensive skills training and tuition reimbursement. Whether you're just starting out on your career journey or you are an experienced professional, it's important to us that you feel recognized and rewarded for your contributions. To find out more about Why Mercury?, or visit the Mercury Community or find answers to general questions at Mercury FAQs Mercury Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex (including pregnancy), sexual orientation, gender identity, national origin, genetic information, creed, citizenship, disability, protected veteran or marital status. As an equal opportunity employer, Mercury Systems is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact the number below for assistance. (978) 256-1300 Click here read about our recent press release.

Job Title: Sous Chef Job Location: Phoenix-USA-85040 Work Location Type: On-Site About us LSG Sky Chefs is one of the world’s largest airline catering and hospitality providers, known for its outstanding reputation and dynamic approach in the industry. Voted “Airline Caterer of the Year in North America” for 2023 and 2024, we are committed to excellence and innovation, driven by the dedication and expertise of our talented employees. Our team members are the heart and soul of our success, consistently delivering exceptional culinary experiences and outstanding service to our clients and their passengers across North and Latin America. Role Purpose Statement The job incumbent is responsible for the preparation of high quality airline meals in accordance with company standards, menu specifications and production schedules. He/she is also responsible for overseeing kitchen helpers in the preparation of meals, while meeting required safety, hygiene and quality standards. Main Accountabilities Food Production • Executes and supervises food production activities, e.g. proper cleaning, cutting, marinating, seasoning, cooking of food items etc., • Assumes responsibilities of Executive Chef when he/she not available ie. Vacation, off-days, menu presentation to customers, etc., • Supervise, coordinate and control kitchen helpers in food storage (e.g. maintaining tidiness, following the first in - first out principle), • Conducts, coordinates and supervises inventories, • Monitors material consumption and orders required food and equipment on a daily basis to satisfy the daily production plan, • Participates in the development of food products and menus as needed for menu presentations, • Must be aware of content in catering manuals; conducts updates when necessary, • Executes countermeasures in the production in case of customer complaints, • Maintains and monitors hygiene, health and safety standards and monitors that Hazard Analysis and Critical Control Point (HACCP) regulations are adhered to, • Maintains and monitors quality, conducts quality control checks according to HACCP regulations, • Conducts quality checks of goods received, • Ensure that the area of responsibility is properly organized, staffed and directed, • Guide, motivate and develop the subordinate employees within the Human Resources Policy, • Make the company's values and management principles live in the department(s), • Implement and control the cost budget in the area of responsibility; initiate and steer corrective actions in case of deviations, • Three to five years of experience in commercial cooking or Apprenticeship or Certification from culinary school required, • Knowledge of food and hygiene regulations (HACCP), • Understand and demonstrate concepts of financial controls (ex: keep food cost within budget, control stock levels while being cost conscious, minimize waste), • Good communication and organizational skills, • Service orientation, • Leadership skills, • Good knowledge of Microsoft Office and Windows-based computer applications LSG Sky Chefs is an EEO and Affirmative Action Employer of Women/Minorities/Veterans/Individuals with Disabilities.

Requisition Number: 71751 The company built on breakthroughs. Join us. Corning is one of the world's leading innovators in glass, ceramic, and materials science. From the depths of the ocean to the farthest reaches of space, our technologies push the boundaries of what's possible. How do we do this? With our people. They break through limitations and expectations - not once in a career, but every day. They help move our company, and the world, forward. At Corning, there are endless possibilities for making an impact. You can help connect the unconnected, drive the future of automobiles, transform at-home entertainment, and ensure the delivery of lifesaving medicines. And so much more. Come break through with us. Corning's businesses are ever evolving to best serve our customers, industries, and consumers. Today, we accelerate and transform life sciences, mobile consumer electronics, optical communications, display, and automotive markets. We are changing the world with: \n • Trusted products that accelerate drug discovery, development, and delivery to save lives\n, • Damage-resistant cover glass to enhance the devices that keep us connected\n, • Optical fiber, wireless technologies, and connectivity solutions to carry information and ideas at the speed of light\n, • Precision glass for advanced displays to deliver richer experiences \n, • Auto glass and ceramics to drive cleaner, safer, and smarter transportation \n\n Role Porpuse: Corning Phoenix is seeking a skilled CNC Programmer for second shift to provide engineering support, optimization, and process development. This role involves troubleshooting processes on the floor, process improvement, and operator training, with a strong focus on quality, efficiency, and compliance with safety and regulatory standards. The individual in this role must possess strong knowledge of engineering principles, manufacturing processes, and CNC programming techniques. This includes G-code, CAM software, and tooling selection. Familiarity with the practical application of engineering science and technology is essential, particularly in the design and production of precision components. Employee must understand and comply with all Environmental, Health, and Safety (EHS) policies, as well as Federal, State, and Local regulatory requirements. Key Responsibilities: \n • Provide real-time technical support and develop, optimize, and validate programs for CNC machining operations. Collaborate with other stakeholders to implement and improve processes, including the training of operators on new SOPs, tooling and fixturing.\n, • Design, manufacture, and implement custom fixturing and tooling. Maintain accurate records of tooling and fixturing drawings. Analyze data and apply logical reasoning to solve complex machining problems.\n, • Support engineering projects including experimentation, estimation, layout, and execution. Assist in developing rework and repair routes for Discrepant Material Reports (DMRs).\n, • Ensure all activities comply with EHS policies and regulatory requirements.\n\n Required Education and Experience: \n • AAS or equivalent 2-year technical degree or High School diploma with 7+ years' experience in machining, CNC programming or related field\n, • Setup and Operation of Swiss Machining, 4 and 5 Axis Milling, including Fixture, Tooling, and Work holding Design\n, • Understanding of automation and control systems. Knowledge of G-code and M-code Programming, GD & T, Drafting and Technical Drawing, Technical Writing, Lean Methodology, AS9100 and/or ISO 9001\n, • MS 365, SolidWorks, Esprit, ERP and MES systems\n, • Statistical Process Control, understanding of Six Sigma and DMAIC principals, Root Cause and Corrective Action methodologies, Disciplined problem solving\n, • Flexible and adaptable; willing to work outside of role to move the team forward. Strong communication skills\n\n Working Conditions: Light lifting effort in a variety of duties throughout finishing areas. Good working conditions. Some exposure to elements of dirt, dust, odors, noise and wetness, nondisagreeable. This position does not support immigration sponsorship. The range for this position is $69,966.00 - $96,203.00 assuming full time status. Starting pay for the successful applicant is dependent on a variety of job-related factors, including but not limited to geographic location, market demands, experience, training, and education. A job that shapes a life. Corning offers you the total package. Your well-being is our priority. Our compensation and benefits package supports your health and wellness, financial aspirations, and career from day one. \n • Company-wide bonuses and long-term incentives align with key business results and ensure you are rewarded when the company performs well. When Corning wins, we all win.\n, • As part of our commitment to your financial well-being, we provide a 100% company-paid pension benefit with fixed contributions that grow throughout your career. Combined with matching contributions to your 401(k) savings plan, Corning's total contributions to your retirement accounts can reach between 7% and 12% of your pay, depending on your age and years of service.\n, • Our health and well-being benefits include medical, dental, vision, paid parental leave, family building support, fitness, company-paid life insurance, disability, disease management programs, paid time off, and an Employee Assistance Program (EAP) to support you and your family. \n, • Getting paid for our work is important, but feeling appreciated and recognized for those contributions motivates us much more. That's why Corning offers a recognition program to celebrate successes and reward colleagues who make exceptional contributions. \n\n We prohibit discrimination on the basis of race, color, gender, age, religion, national origin, sexual orientation, gender identity or expression, disability, veteran status or any other legally protected status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. To request an accommodation, please contact us at [email protected].

Respiratory Therapists should be able to stand and walk for long periods of time, as well as bend, lean or stoop without difficulty. Respiratory Therapists should be able to easily lift 20 pounds. As a Respiratory Therapist, you will provide direct patient care to patients in a variety of clinical a

Job Description Slitter Operator - Small Rolls- 2nd Shift - Phoenix, AZ POSITION SUMMARY: We are currently seeking a Machine Operator to work within our fast-paced, energetic environment. This role primarily involves quality, and delivery results and working well with the team members to reach production levels, while promoting a safe work environment. KEY RESPONSIBILITIES: Compliance with all Environmental, Health, and Safety (EHS), standards, regulations, and rules Direct participation in EHS training, safety observations, and hazard identification Seeks and proactively implements Continuous Improvement (CI) activities through teamwork and CI process participation Proactively monitor and assume responsibility for product quality during all phases of operations Perform set-up, operate, optimize, and troubleshoot Label equipment to manufacture product according to quality and productivity requirements Preparation, testing, and application of adhesives, inks, releases, or other chemistry to support operations Ensures that equipment runs in accordance with operational standards, goals, and expectations Performs minor repairs and preventative maintenance as needed Ensure the correct raw materials are being processed Logs and posts production information into the computer and/or required production logs Provide communication daily with other departments including planning, maintenance, leadership, HR, and other coworkers. Maintain 6S housekeeping standards of work zones and walkways Support packing and material movement tasks as needed Directly supports training and cross training of other coworkers Support development and roll out of Standard Work including Standard Operating Procedures (SOP), Work Instructions (WI), One Point Lessons, (OPL) and Training Documentation Perform other duties/tasks as assigned SUPPORTING ACTIVITIES: Two or more years of operating Machine experience, preferred Good Mechanical ability Ability to use rulers, gauges, and other equipment Effective communication and interpersonal skills without constant supervision Well-developed work routines to ensure smooth machine operation and minimal downtime Proficiency with computers; ability to learn and use additional programs Ability to distinguish differences between finished product compared to product specifications Ability to identify maintenance needs and ensure that all required preventative maintenance is performed Ability to lift 50 lbs Ability to stoop, bend, crouch, extend, lean, and maneuver around equipment at varying heights Ability to work in standing position for long periods of time Other duties, as assigned QUALIFICATIONS: Minimum of 2 years of machine operator experience and a basic knowledge of lean manufacturing methodology/initiatives with proven ability to lead teams Highly self-motivated and process driven Effective problem-solving skills Flexibility to work all shifts Continuous improvement leader who energizes and empowers others Possess strong organizational skills and strong communication skills. Work effectively in ambiguous situations while maintaining a positive attitude. The willingness to learn, strong initiative, good communication with all levels in the organization People and interpersonal skills are a must. Must have respect for others, desire to learn, be flexible, and open minded Company DescriptionDomtar is a leading, privately held manufacturer of diversified forest products, with a workforce of roughly 14,000 employees in more than 60 locations across North America. The company has an annual capacity of 6.3 million metric tons of pulp, paper, packaging and tissue annually, and has an annual production capacity of about 3 billion board feet of lumber and other wood products. Formerly known as the Paper Excellence Group, Domtar is comprised of legacy businesses Paper Excellence Canada Holdings Corporation, Domtar Corporation and Resolute Forest Products. Domtar prides itself on operational excellence, delivering sustainable, high-quality and cost-effective products to meet and exceed customer needs globally. The company is committed to turning sustainable wood fiber into everyday essential products. Domtar’s principal executive office is located in Fort Mill, South Carolina. As a world-class industry leader, we deliver the highest value to our customers, empower our employees to be the best, contribute to the well-being of our communities, and are committed to the highest standards of ethics and business conduct.Domtar is a leading, privately held manufacturer of diversified forest products, with a workforce of roughly 14,000 employees in more than 60 locations across North America. The company has an annual capacity of 6.3 million metric tons of pulp, paper, packaging and tissue annually, and has an annual production capacity of about 3 billion board feet of lumber and other wood products. Formerly known as the Paper Excellence Group, Domtar is comprised of legacy businesses Paper Excellence Canada Holdings Corporation, Domtar Corporation and Resolute Forest Products. \r\n\r\nDomtar prides itself on operational excellence, delivering sustainable, high-quality and cost-effective products to meet and exceed customer needs globally. The company is committed to turning sustainable wood fiber into everyday essential products. Domtar’s principal executive office is located in Fort Mill, South Carolina. \r\n\r\nAs a world-class industry leader, we deliver the highest value to our customers, empower our employees to be the best, contribute to the well-being of our communities, and are committed to the highest standards of ethics and business conduct.

TNAA TotalMed RN is seeking a travel nurse RN OR - Operating Room for a travel nursing job in Phoenix, Arizona. • Specialty: OR - Operating Room, • Discipline: RN, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel We're looking for Operating Room RNs for an immediate travel nurse opening in Phoenix, AZ. The right RN should have 1-2 years recent acute care experience as a circulating nurse, and/or scrub nurse, and potentially RN first assistant. Read below for more requirements. As an OR Travel Nurse, you will assist physicians and medical staff in caring for surgical patients, as well as providing pre- and post-surgery care and education to the patient. Circulating OR Nurses work within the operating suite but outside of the sterile field; Scrub OR Nurses handle and prepare operating instruments and equipment within the sterile field. Surgery responsibilities may include preparing instruments for specific surgical procedures, monitoring and observing the patient during surgery, and responding to potential complications alongside the physician. As an OR Travel Nurse, you should be prepared to perform the following tasks: • Provide basic bedside care., • Prepare, administer and record prescribed medication, reporting any adverse reactions to treatment., • Serve as the communication liaison between patients' family members and members of the operating team., • Ensure that the correct procedure(s) is being performed on the correct patient., • Initiate patient education plan as prescribed by physician; teach patients and families how to manage medication and home care needs. Additional duties for Circulating OR Nurses may include:, • Responding to comfort and safety needs of patient., • Accurate care and handling of specimens., • Monitoring equipment used during surgery., • Inventory of surgical items pre- and post-procedure. Additional duties for Scrub OR Nurses may include:, • Selection and handling of surgical instruments and supplies during procedures., • Inventory of surgical items pre- and post-procedure. Additional duties for RN First Assistant may include:, • Assist physicians by delivering direct surgical care., • Help control bleeding., • Suture patients following surgery. OR Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. RNs may face hazards from exposure to certain chemicals or infectious diseases in the operating room environment. Requirements*: BLS, 2 Years • Additional certifications may be required before beginning an assignment. TotalMed Travel Job ID #1348298. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Operating Room - OR RN - Travel Nurse TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. • Weekly pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Sick pay, • Wellness and fitness programs, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1

TNAA TotalMed RN is seeking a travel nurse RN CVOR for a travel nursing job in Phoenix, Arizona. • Specialty: CVOR, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days, • Employment Type: Travel We're looking for Cardiovascular Operating Room RNs for an immediate travel nurse opening in Phoenix, AZ. The right RN should have 1-2 years recent acute care experience. Read below for more requirements. As a CVOR RN, you'll be responsible for providing professional CVOR care services to support a team of physicians, RNs and other medical staff. Our CVOR Travel Nurses demonstrate advanced clinical expertise in circulating for a variety of cardiothoracic surgical procedures and other complex surgeries. As a CVOR Travel Nurse, you should be prepared to perform the following tasks: • Assess, plan and evaluate the nursing care needs of the patient before, during and after a surgical procedure., • Participate in the care of patients receiving conscious sedation., • Administer prescribed medications, apply dressings, monitor vital signs., • Assist physician during procedures., • Maintain aseptic techniques and actively monitor situations which could lead to breaches in aseptic technique., • Coordinate the operating room with respect to sterility, cleanliness, availability of functioning equipment and supplies., • Ensure the proper handling of specimens. CVOR Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. Because of the fast-paced environment, Cardiovascular OR RNs must possess good skills for coping with stress and be able to relate to people of all ages and backgrounds. Requirements*: BLS, 2 Years • Additional certifications may be required before beginning an assignment. TotalMed Travel Job ID #1348312. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cardiovascular Operating Room - CVOR RN - Travel Nurse TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. • Weekly pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Sick pay, • Wellness and fitness programs, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1

TNAA TotalMed RN is seeking a travel nurse RN ICU - Intensive Care Unit for a travel nursing job in Sun City, Arizona. • Specialty: ICU - Intensive Care Unit, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel We're looking for Intensive Care Unit RNs for an immediate travel nurse opening in Sun City, AZ. The right nurse should have 1-2 years recent acute care experience. Read below for more requirements. As an ICU Travel Nurse, you'll be responsible for evaluating and monitoring patients in an Intensive Care Unit setting. ICU RNs provide the most direct care to patients in life-threatening situations, documenting and providing physician-directed care, assessing and implementing patient care plans, and delegating to other care providers as appropriate. As an ICU RN you will also be providing education and support to patient families, possibly for long-term care needs. As an ICU Travel Nurse, you should be prepared to perform the following tasks: • Provide basic bedside care., • Prepare, administer and record prescribed medication, reporting any adverse reactions to treatment., • Order and evaluate diagnostic tests., • Take samples for lab work, order corresponding lab work and interpret reports., • Monitor and adjust specialized equipment, and interpret and record electronic displays., • Ensure proper placement and functioning of catheters, leads and tubing., • Communicate patients' conditions to family members. ICU Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. RNs may face hazards from exposure to certain chemicals or infectious diseases and will treat patients that may be confused, agitated, and/or uncooperative. Requirements*: BLS, ACLS, 2 Years • Additional certifications may be required before beginning an assignment. TotalMed Travel Job ID #1347799. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Intensive Care Unit - ICU RN - Travel Nurse TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. • Weekly pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Sick pay, • Wellness and fitness programs, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1

TNAA TotalMed RN is seeking a travel nurse RN ICU - Intensive Care Unit for a travel nursing job in Phoenix, Arizona. • Specialty: ICU - Intensive Care Unit, • Discipline: RN, • Start Date: 01/05/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel We're looking for Intensive Care Unit RNs for an immediate travel nurse opening in Phoenix, AZ. The right nurse should have 1-2 years recent acute care experience. Read below for more requirements. As an ICU Travel Nurse, you'll be responsible for evaluating and monitoring patients in an Intensive Care Unit setting. ICU RNs provide the most direct care to patients in life-threatening situations, documenting and providing physician-directed care, assessing and implementing patient care plans, and delegating to other care providers as appropriate. As an ICU RN you will also be providing education and support to patient families, possibly for long-term care needs. As an ICU Travel Nurse, you should be prepared to perform the following tasks: • Provide basic bedside care., • Prepare, administer and record prescribed medication, reporting any adverse reactions to treatment., • Order and evaluate diagnostic tests., • Take samples for lab work, order corresponding lab work and interpret reports., • Monitor and adjust specialized equipment, and interpret and record electronic displays., • Ensure proper placement and functioning of catheters, leads and tubing., • Communicate patients' conditions to family members. ICU Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. RNs may face hazards from exposure to certain chemicals or infectious diseases and will treat patients that may be confused, agitated, and/or uncooperative. Requirements*: ACLS, BLS, 2 Years • Additional certifications may be required before beginning an assignment. TotalMed Travel Job ID #1341633. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Intensive Care Unit - ICU RN - Travel Nurse TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. • Weekly pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Sick pay, • Wellness and fitness programs, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1

TNAA TotalMed RN is seeking a travel nurse RN ICU - Intensive Care Unit for a travel nursing job in Glendale, Arizona. • Specialty: ICU - Intensive Care Unit, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days, • Employment Type: Travel We're looking for Intensive Care Unit RNs for an immediate travel nurse opening in Glendale, AZ. The right nurse should have 1-2 years recent acute care experience. Read below for more requirements. As an ICU Travel Nurse, you'll be responsible for evaluating and monitoring patients in an Intensive Care Unit setting. ICU RNs provide the most direct care to patients in life-threatening situations, documenting and providing physician-directed care, assessing and implementing patient care plans, and delegating to other care providers as appropriate. As an ICU RN you will also be providing education and support to patient families, possibly for long-term care needs. As an ICU Travel Nurse, you should be prepared to perform the following tasks: • Provide basic bedside care., • Prepare, administer and record prescribed medication, reporting any adverse reactions to treatment., • Order and evaluate diagnostic tests., • Take samples for lab work, order corresponding lab work and interpret reports., • Monitor and adjust specialized equipment, and interpret and record electronic displays., • Ensure proper placement and functioning of catheters, leads and tubing., • Communicate patients' conditions to family members. ICU Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. RNs may face hazards from exposure to certain chemicals or infectious diseases and will treat patients that may be confused, agitated, and/or uncooperative. Requirements*: BLS, 2 Years • Additional certifications may be required before beginning an assignment. TotalMed Travel Job ID #1332928. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Intensive Care Unit - ICU RN - Travel Nurse TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. • Weekly pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Sick pay, • Wellness and fitness programs, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1

TNAA TotalMed RN is seeking a travel nurse RN CVICU for a travel nursing job in Phoenix, Arizona. • Specialty: CVICU, • Discipline: RN, • Start Date: 01/12/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel We're looking for Cardiovascular Intensive Care Unit RNs for an immediate travel nurse opening in Phoenix, AZ. The right RN should have 1-2 years' recent acute care experience. Read below for more requirements. As a CVICU Travel Nurse, you will work with a diverse team of caregivers to administer care to patients following specialized procedures including open-heart surgery and heart transplants. Cardiovascular Intensive Care Unit RNs should have experience and skill caring for patients in a fast-paced, urgent and critical care environment. As a CVICU Travel Nurse, you should be prepared to perform the following tasks: • Provide critical care to patients with potentially life-threatening heart conditions., • Prepare and administer prescribed medications., • Take samples for diagnostic tests; order, interpret and evaluate diagnostic tests., • Apply hemodynamic, phlebotomy and IV protocols., • Be called in for emergencies to provide CPR and operate defibrillators hospital-wide., • Educate patients and family members on how to manage recovery at home. CVICU Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. Because of the fast-paced environment, Cardiovascular Intensive Care Unit RNs must possess good skills for coping with stress and be able to relate to people of all ages and backgrounds. Requirements*: ACLS, BLS, 2 Years • Additional certifications may be required before beginning an assignment. TotalMed Travel Job ID #1310696. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cardiovascular Intensive Care Unit - CVICU RN - Travel Nurse TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. • Weekly pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Sick pay, • Wellness and fitness programs, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1

TNAA TotalMed RN is seeking a travel nurse RN CVICU for a travel nursing job in Glendale, Arizona. • Specialty: CVICU, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days, • Employment Type: Travel We're looking for Cardiovascular Intensive Care Unit RNs for an immediate travel nurse opening in Glendale, AZ. The right RN should have 1-2 years' recent acute care experience. Read below for more requirements. As a CVICU Travel Nurse, you will work with a diverse team of caregivers to administer care to patients following specialized procedures including open-heart surgery and heart transplants. Cardiovascular Intensive Care Unit RNs should have experience and skill caring for patients in a fast-paced, urgent and critical care environment. As a CVICU Travel Nurse, you should be prepared to perform the following tasks: • Provide critical care to patients with potentially life-threatening heart conditions., • Prepare and administer prescribed medications., • Take samples for diagnostic tests; order, interpret and evaluate diagnostic tests., • Apply hemodynamic, phlebotomy and IV protocols., • Be called in for emergencies to provide CPR and operate defibrillators hospital-wide., • Educate patients and family members on how to manage recovery at home. CVICU Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. Because of the fast-paced environment, Cardiovascular Intensive Care Unit RNs must possess good skills for coping with stress and be able to relate to people of all ages and backgrounds. Requirements*: BLS, ACLS, 2 Years • Additional certifications may be required before beginning an assignment. TotalMed Travel Job ID #1333261. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cardiovascular Intensive Care Unit - CVICU RN - Travel Nurse TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. • Weekly pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Sick pay, • Wellness and fitness programs, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1

TNAA TotalMed RN is seeking a travel nurse RN CVICU for a travel nursing job in Glendale, Arizona. • Specialty: CVICU, • Discipline: RN, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel We're looking for Cardiovascular Intensive Care Unit RNs for an immediate travel nurse opening in Glendale, AZ. The right RN should have 1-2 years' recent acute care experience. Read below for more requirements. As a CVICU Travel Nurse, you will work with a diverse team of caregivers to administer care to patients following specialized procedures including open-heart surgery and heart transplants. Cardiovascular Intensive Care Unit RNs should have experience and skill caring for patients in a fast-paced, urgent and critical care environment. As a CVICU Travel Nurse, you should be prepared to perform the following tasks: • Provide critical care to patients with potentially life-threatening heart conditions., • Prepare and administer prescribed medications., • Take samples for diagnostic tests; order, interpret and evaluate diagnostic tests., • Apply hemodynamic, phlebotomy and IV protocols., • Be called in for emergencies to provide CPR and operate defibrillators hospital-wide., • Educate patients and family members on how to manage recovery at home. CVICU Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. Because of the fast-paced environment, Cardiovascular Intensive Care Unit RNs must possess good skills for coping with stress and be able to relate to people of all ages and backgrounds. Requirements*: BLS, ACLS, 2 Years • Additional certifications may be required before beginning an assignment. TotalMed Travel Job ID #1317438. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cardiovascular Intensive Care Unit - CVICU RN - Travel Nurse TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. • Weekly pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Sick pay, • Wellness and fitness programs, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1

TNAA TotalMed RN is seeking a travel nurse RN CVICU for a travel nursing job in Glendale, Arizona. • Specialty: CVICU, • Discipline: RN, • Start Date: 12/14/2025, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days, • Employment Type: Travel We're looking for Cardiovascular Intensive Care Unit RNs for an immediate travel nurse opening in Glendale, AZ. The right RN should have 1-2 years' recent acute care experience. Read below for more requirements. As a CVICU Travel Nurse, you will work with a diverse team of caregivers to administer care to patients following specialized procedures including open-heart surgery and heart transplants. Cardiovascular Intensive Care Unit RNs should have experience and skill caring for patients in a fast-paced, urgent and critical care environment. As a CVICU Travel Nurse, you should be prepared to perform the following tasks: • Provide critical care to patients with potentially life-threatening heart conditions., • Prepare and administer prescribed medications., • Take samples for diagnostic tests; order, interpret and evaluate diagnostic tests., • Apply hemodynamic, phlebotomy and IV protocols., • Be called in for emergencies to provide CPR and operate defibrillators hospital-wide., • Educate patients and family members on how to manage recovery at home. CVICU Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. Because of the fast-paced environment, Cardiovascular Intensive Care Unit RNs must possess good skills for coping with stress and be able to relate to people of all ages and backgrounds. Requirements*: BLS, ACLS, 2 Years • Additional certifications may be required before beginning an assignment. TotalMed Travel Job ID #1320818. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cardiovascular Intensive Care Unit - CVICU RN - Travel Nurse TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. • Weekly pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Sick pay, • Wellness and fitness programs, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1

TNAA TotalMed RN is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Phoenix, Arizona. • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 01/12/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel We're looking for Labor and Delivery RNs for an immediate travel nurse opening in Phoenix, AZ. The right RN should have 3 years' recent acute care experience. Read below for more requirements. L&D Travel Nurses provide care and support for women before, during and after delivery of a baby. L&D RNs must ensure that the medical as well as emotional needs of their patients are met at all times throughout the birthing process. As an L&D RN, you'll be responsible for assisting physicians when epidurals or pain medications are administered, episiotomies are performed, or when the patient requires preparation for a cesarean delivery. As an L&D Travel Nurse, you should be prepared to perform the following tasks: • Stay with and monitor patient throughout labor., • Monitor contractions and help patients with breathing techniques., • Check cervix periodically to monitor progression/lack of dilation., • Ensure beds are kept clean and dry; clean up bodily fluids expelled before and after birthing process., • Aid physician with drapes, gloves, gowns, delivery instruments, etc., • Immediate care of newborn. L&D Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. Because of the fast-paced environment, L&D RNs must possess good skills for coping with stress and be able to relate to people of all ages and backgrounds. Requirements*: ACLS, BLS, 3 Years • Additional certifications may be required before beginning an assignment. TotalMed Travel Job ID #1310412. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Labor and Delivery - LD RN - Travel Nurse TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. • Weekly pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Sick pay, • Wellness and fitness programs, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1