Mechanical engineering jobs in Phoenix, Arizona - Page 3Create job alerts

Job DescriptionPlease note: This is an on-site position that requires the selected candidate to work from our Phoenix, AZ, office. This is not a remote role. About Acron Aviation: Acron Aviation is an agile commercial aviation partner with a long heritage of providing established, industry-certified solutions, as well as future-focused, data-driven innovations. With customers worldwide, our employees are dedicated to the company's mission of innovating to create safer skies. For more information, visit acronaviation.com Job Description: As a Lead Electrical Engineer within our Surveillance product line, you are focused on developing TCAS and transponder radios, owning the electrical engineering discipline through initial concept generation, design, qualification, and lifecycle management. You will interact with business development and all engineering functions, with a specific focus on relating the requirements for top-level product development to the particular technical areas of electrical engineering. You will be involved in multidisciplinary project teams that encompass mechanical, electrical, digital/analog, RF, firmware, and software engineering, working together to plan, design, prototype, and test avionics transponders, RF, and sensor-based systems. You will also be responsible for mentoring junior engineers, as well as ensuring the Surveillance product line adheres to industry best practices for product development. The design focus will include surveillance avionics for Air Transport, as well as General Aviation and emerging platforms, such as Urban Air Mobility (UAM) eVTOL aircraft. Essential Functions: • Conceptualize, design, integrate, and qualify digital, analog, and power circuitry, with supplemental RF principles, in the avionics realm., • Design circuits with microprocessors, memory, Ethernet, SPI, I2C, high-speed busses including PCIE, and various avionics interfaces., • Proficiency in electrical schematic generation and review. Support for and review of CAD layout (preferred skills with Altium)., • Generate design documents including HRDs, HDDs, and HCIAs. Generate certification documents such as PHACs., • Work effectively designing individual circuits, aircraft system architectures, and everything in between., • Familiarity with electrical analysis tools for power distribution, stress analysis, and other relevant simulations., • Participate in the proposal process for programs with EE requirements by estimating tasks, identifying risk, and planning development., • Effectively communicate across multiple technical teams., • Communicate directly with customers, in person or virtually, to understand their problems and formulate actionable solutions., • Other duties as assigned., • Bachelor’s Degree in Electrical Engineering or Computer Engineering and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience., • Minimum 6 years of prior relevant experience in an engineering discipline with systems engineering principles, including requirements definition, requirements verification, design reviews and documentation, integration, test, and demonstration., • Minimum 7 years’ experience with electrical hardware design., • Minimum of 2 years' experience in customer-facing roles (internal or external)., • Hands-on experience designing and developing avionics products, RF, or sensor systems., • Work as a technology generalist with large amounts of design freedom to identify the most effective and timely solution, with a primary focus on the electrical realm., • Python or C++ working knowledge., • Experience with and an understanding of aerospace systems, especially in the development of integrated hardware/software products, • Exposure to Model-Based Systems Engineering, • Awareness of FPGA/firmware development requirements as they impact electrical design, • Experience with RTOS integration and understanding of its implications on hardware design, • Practical understanding of the complexities of RF design, especially in the L-band frequency range, • Excellent people skills, with experience leading and collaborating in a multi-disciplinary, diverse, and dynamic team environment., • Excellent communication skills (written, verbal, & presentation), • Knowledge of DO-160, DO-178, and DO-254, • Experience with Design to Cost and Design for Manufacturability, • Experience in effectively supporting the production and test of products in a different geographic location, • Demonstrated ability to handle multiple programs and responsibilities simultaneously, • Ability to operate and identify the appropriate path forward with minimal oversight, • Pilot License or Part 107 certificate

Job DescriptionDescription: Total Warehouse is looking for an AutoCAD Drafter for pallet racking systems is responsible for creating precise technical drawings and layout designs used in warehouse storage solutions. This role involves working closely with project managers, engineers, and sales teams to develop customized racking configurations that meet client specifications and safety standards. Requirements: Job Responsibilities: • Responsible for updating all Projects in Netsuite, • Keeping Customer and Sales Up to date on status, • Drafting on current warehouse on Auto CAD, • Coordinate with Structural Engineer, • Submittal of Permits to City, • Building Inspection and Anchor Testing, • Coordinate with FPE if necessary, • Coordinate with install team on the installation, • Site visit before and after completion of project, • Collaborates with project staff to create a strategic action plan and cost estimates of materials, time, labor, and other resources required to complete the project., • Facilitates and contributes to the development of project plans and designs., • Recommends and/or analyzes materials, equipment, and practices used in the project., • Assesses the competence, capabilities, resources, and financial status of vendors., • Supervises progress of development project., • Compares the actual cost of development project to estimates., • Collaborates with design group to change plans if problems arise., • Analyzes equipment, systems, processes, and systems to identify modifications to improve efficiency, increase quality, and reduce costs., • Prepares periodic progress and cost reports for leadership., • Ensures compliance with codes, guidelines, best practices, and policies., • Collaborates with the operations department to identify and troubleshoot problems., • A bachelor's degree in engineering, with the specific field depending on the industry, such as mechanical, electrical, civil, or software engineering., • 1-2 years of experience in an engineering role., • Understanding of engineering principles, design, and problem-solving., • Engineering Effectiveness, • R&D Cost/Benefit Ratio, • Engineering-on-Time Delivery, • Project Margin, • Changeover Time

Job Description Sales Engineer – SlowStop® Protective Guarding Systems Impact Recovery is seeking a Sales Engineer - SlowStop® Protective Guarding Systems, located in the Western US, who possesses strong technical expertise and an ability to drive sales. In this role, you will be responsible for analyzing customer needs, proposing engineered solutions, and leading the sales process for industrial and commercial safeguarding products. Your unique blend of technical knowledge and consultative selling skills will play a key role in helping clients protect their people, property, and equipment. Responsibilities 1. Technical Sales & Consultation 2. Customer Engagement & Relationship Management 3. Market Expansion & Lead Generation 4. Project Coordination & Technical Support 5. Sales Reporting & Targets • Prepare regular sales performance and activity reports for management review. Qualifications Education & Experience Technical & Regulatory Knowledge • Ability to read and interpret engineering drawings and schematics. Sales & Communication Skills • Proven track record of meeting or exceeding sales targets in a technical capacity. Preferred Qualifications • Experience with CAD or other design software for product customization., • Industry certifications in safety or security., • Willingness to travel (up to 65%) for client visits and industry events., • Located in the Western US near major airport. If you have a passion for solving complex challenges and thrive in a consultative sales environment, we invite you to join our team as a Sales Engineer – SlowStop® Protective Guarding Systems. Your expertise will be instrumental in creating safer, secure workplace environments for our valued clients. Company DescriptionImpact Recovery was founded in 1991 in San Antonio, Texas, and has grown into a thriving international organization. Expanding beyond roadways, today we manufacture high-performance products that help protect people and property around the world.Impact Recovery was founded in 1991 in San Antonio, Texas, and has grown into a thriving international organization. Expanding beyond roadways, today we manufacture high-performance products that help protect people and property around the world.

Job DescriptionDescription: Integrated Water Services (IWS) is revolutionizing water! For over 20 years, we have been at the forefront of transforming water challenges into sustainable solutions. Our team of passionate innovators designs and builds cutting-edge water and wastewater treatment systems that protect communities and the environment. From bustling cities to remote regions, we are making a real, positive impact on the world. We are not just engineers and builders; we are problem solvers, creators, and environmental stewards. Join us in building a better future, one water drop at a time. We’re seeking a Senior Water / Wastewater Engineer who has a strong technical understanding of multiple water and wastewater treatment processes and can lead overall process design for facilities. Responsibilities • Translate customer requirements into functional system designs., • Review pre-construction design and documentation., • Support the sales team by assisting with technical design, estimating hours, and highlighting logistical challenges., • Generate functional system descriptions and diagrams., • Provide ongoing engineering support., • Perform system calculations from preliminary to final design., • Provide markups for plans and lead cost estimates., • Coordinate with project staff, other disciplines, subconsultants, clients, and reviewers to ensure accuracy and quality of work., • Manage and maintain project documentation, including meeting project schedules, budgets, and scope., • Assist in proposal development, scopes of work, and fee schedule preparation., • Mentor junior staff with technical and professional development., • Review and approve final design of projects.Requirements:, • Bachelor's degree in engineering (civil, mechanical, environmental or other related field). Master’s degree preferred., • 8+ years of experience in water and wastewater treatment industry, • 5+ years in water quality analysis, treatment evaluations, process design, and regulatory compliance assessments., • Licensed Professional Engineer preferred but not required., • Strong knowledge and understanding of water and wastewater treatment technologies, • Experience with general construction, utilities, and/or water and wastewater treatment plants preferred, • Ability to read and understand civil, mechanical, structural, and electrical drawings., • Ability to create piping & instrumentation diagrams (P&IDs)., • Proficient with MS Office products and other standard software packages. Join Our Team: Are you ready to make a splash? IWS is seeking talented individuals to join our high-energy team. We offer competitive compensation and endless opportunities for growth. Be part of something bigger than yourself. Benefits: • Competitive salary and incentive compensation plans, • Comprehensive benefits package (medical, dental, vision, STD, LTD), • Paid time off (PTO) to recharge and explore Base Salary: $125,000 - $165,000 *The provided base salary range is used nationally. The rate offered is compliant with federal/local regulations and may vary by experience, certification/education, market conditions, location, etc. #LI-Remote IWS is an equal opportunity employer. We do not discriminate based on marital status, race, color, creed, gender, sex, religion, national origin, gender identity, age, veteran status, union affiliation, physical or mental disability, citizenship status, or sexual orientation.

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Senior Water/Wastewater EngineerLocation - Chicago, IL \u007C Baton Rouge, LA \u007C Cedar Rapids, IA \u007C Austin, TX \u007C Denver, CO (Centennial) \u007C Des Moines, IA \u007C Minneapolis, MN \u007C Muscatine, IA \u007C Phoenix, AZ \u007C West Palm Beach, FLJob Type – Hybrid, Onsite#LI-BG1 Stanley Consultants is seeking a Senior Water/Wastewater Engineer to lead and deliver water, wastewater, and groundwater projects in any of our Water offices. This individual will be responsible for the planning, design, construction, and project management of water resources and municipal utility infrastructure, including drinking water sources, distribution systems, storage facilities, wastewater systems, and water treatment projects from technical development through construction services.The Senior Water/Wastewater Engineer will have expertise in one or more of the following: • Water distribution, transmission, and storage, • Water/Wastewater treatment, • Wastewater conveyance and peak weather flow infrastructure, • Wastewater treatment, • Water Reuse, • Pump Stations, • Hydraulic modeling, • Asset management, • Risk and resiliency consulting and design, • Smart water system planning, design, and implementationWhat You Will Be Doing:, • Leading team delivery of drinking water projects including evaluation and detailed design of intake structures, surface and ground water treatment plants, water reuse systems, storage, pumping, and transmission and distribution projects., • Preparing master planning reports and documentation required for grants and loans., • Self-motivated subject matter expert; demonstrated through participating in local professional organizations, preparing, and presenting market specific papers and presentations., • Ability to articulate and operate within the One Water paradigm., • Integration of smart water systems, process automation, and machine learning into overall water production and distribution design., • Use AutoCAD, Civil 3D, MicroStation and other applicable engineering design tools., • Work in collaboration with other disciplines (civil, mechanical, electrical, I&C, structural, and CAD) in producing plans and specifications., • Assisting in marketing business opportunities with key clients and development of responses to RFP/RFQs., • Providing marketing, technical leadership, and support during the procurement and execution of projects., • Developing and maintaining long-term relationships with clients., • Assisting clients with permitting, property acquisition, and stakeholder involvement., • Successfully collaborate with multi-disciplinary design teams., • Consistently managing and delivering projects on time and within budget., • Desire and ability to manage and mentor staff.Required Qualifications:, • Bachelor of Science (BS) degree in either Civil Engineering, Mechanical Engineering, Chemical Engineering, or Environmental Engineering., • At least 10 years of relevant experience., • Professional Engineer (PE) license; Illinois PE preferred or must be able to obtain within 6 months of hire date., • Illinois, Indiana, Michigan, and/or Wisconsin network of water/wastewater connections., • Regional expertise in one or more areas of water supply, treatment, storage, and/or distribution technical expertise., • Active participation in professional organizations., • Strong verbal, computer, and organizational skills., • Excellent technical writing skills., • Strong client relationship skills., • Excellent design team leadership skills.Preferred Qualifications: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! Summary: The Engineer Manager will supervise all engineering department personnel, design department manager, and documentation department manager, responsible for engineering department budget and costs, provide technical assistance to sales and applications during the proposal stage, responsible for all technical aspects of projects, and producing safe product designs. Responsibilities of the Engineering Manager include, but are not limited to: • Ensure all team members receive proper training and understand the full scope of their roles., • Provide team members with a P21 manual and encourage its use as a reference tool., • Develop a comprehensive training program that establishes key objectives and required areas of knowledge for AEs., • Match individual abilities with project requirements., • Review the team’s work for technical accuracy., • Provide continuous oversight and additional training as needed., • Assess AEs’ progress and manage workloads effectively., • Hire and provide ongoing training for AEs., • Conduct performance reviews with team members., • Provide ongoing technical support and recommendations to Sales Engineers, AEs, Project teams, and management., • Collaborate with the Sales Team to prepare quotes and proposals., • Evaluate technical data and create recommendations for customers, AEs, and representatives., • Conduct training to enhance the technical expertise of AEs., • Coordinate with management and vendors to deliver ongoing departmental training., • Proven experience in managing engineering teams or similar roles., • Strong technical background with expertise in project estimation and applications engineering., • Excellent leadership, organizational, and communication skills., • Ability to develop and implement training programs and departmental policies., • Experience collaborating with cross-functional teams and managing complex projects. #LI-JG1 #zrjg Additional Information: • Physical Demand: Office Environment, • Working Conditions: Sitting Down & Standing, • Training/Certifications: N/A, • Shift Time/Overtime: M - F, • Travel: N/A, • Education: Mechanical Engineering Degree or Equivalent Experience DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

Job Description Job Title: Structural Engineer – Modular Steel Systems Location: Phoenix, AZ or Buffalo, NY Department: Engineering Reports To: Director of Engineering Employment Type: Full-Time | On-Site About GTI GTI is a rapidly growing manufacturer of mission-critical modular infrastructure, delivering high-quality steel-based structures for the energy, defense, and heavy industrial markets. With engineering and fabrication facilities in both Phoenix and Buffalo, GTI specializes in custom modular enclosures, containerized systems, and large-scale steel assemblies designed for deployment in extreme environments. Position Overview We are seeking a highly skilled Structural Engineer to join our engineering team and drive the design, analysis, and validation of modular steel structures. While experience in bridge or suspended structure design is highly valued, the core focus of this role is on modular fabrication, large welded assemblies, and containerized structures used in high-load industrial environments. This role requires a hands-on engineer who can translate concepts into production-ready designs, work closely with fabrication teams, and ensure structural integrity, safety, and code compliance. Key Responsibilities • Structural Design & Analysis, • Design modular steel structures, large welded assemblies, platforms, frames, and load-bearing systems for containerized and enclosure-based applications., • Perform structural analysis using FEA software and hand calculations to evaluate static and dynamic loads, fatigue, seismic, and wind loading., • Incorporate bridge engineering principles when applicable to long-span or suspended modular systems., • Engineering Documentation, • Develop engineering drawings, design reports, and complete technical documentation using SolidWorks, AutoCAD, and Revit/BIM tools., • Produce accurate bills of materials (BOMs), weld symbols, and fabrication-ready drawings., • Manufacturing Collaboration, • Partner with fabrication, quality, and project teams to ensure structural designs are optimized for manufacturability, cost efficiency, and internal capability., • Support shop drawing reviews, first article builds, and QA/QC testing for structural validation., • Field & Deployment Support, • Conduct site assessments, participate in installation support, and perform structural evaluations of deployed modular systems., • Compliance & Standards, • Ensure all designs comply with applicable structural codes and standards, including IBC, AISC, AWS D1.1, and applicable state regulations., • Bachelor’s degree in Civil, Structural, or Mechanical Engineering (Master’s preferred), • 5+ years of experience in structural design for steel structures, welded assemblies, or modular systems, • Proficiency with FEA tools (RISA, SAP2000, STAAD.Pro, or similar), • Experience with CAD platforms including SolidWorks and AutoCAD; familiarity with Revit or BIM tools preferred, • Strong understanding of structural design principles, welding/joint design, corrosion protection, and load path analysis, • Knowledge of relevant building codes and standards (IBC, AISC, AWS D1.1), • PE licensure or the ability to obtain within 12 months, • Experience in modular construction, container-based fabrication, or bridge design, • Familiarity with design-for-manufacturing principles and fabrication workflows, • Experience collaborating directly with manufacturing and field installation teams, • Shape the future of modular steel infrastructure and energy systems, • Competitive salary and comprehensive benefits package, • Collaborate across disciplines in a fast-paced, hands-on environment

Job Description Position Summary: Performs basic mechanical assembly functions on production type hardware according to company workmanship standards and military or client specifications. Uses hand or power tools to trim, shim, cut, and make other adjustments to fit components together and align them properly. May assist in instructing and training lower-level assemblers. Reads and interprets assembly drawings to work orders using work instructions. May set up and operate automated assembly equipment. At the most senior level may serve as a team leader providing training to new staff and evaluating the performance and finished work of assigned staff. Essential Duties and Responsibilities include, but are not limited to: • Determine Detail/Hardware locations per blueprints and mylars, • Set-up and operate Drill Press, Pneumatic drills, “C” squeezes, Hand Squeezes, Rivet Pullers., • Drill holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies per blueprint and customer specifications., • Install units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools., • Bolt, screw, or rivet accessories to fasten, support, or hang components and subassemblies., • Locate and mark reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments., • Mask Components with paint, plastic plugs and tape prior to surface coating., • Complete all required training and any additional training required by supervisor., • Complete quality documentation, • Verify part and hardware count to shop router, • Other duties as assigned Qualifications: • Experience and Education:, • 1-2 years of relevant experience, • High school degree or equivalent, • Technical Skills:, • Excellent attention to detail, • Strong hand-eye coordination, • Ability to read, understand and interpret engineering drawings and specifications (e.g., blueprint reading, specification, change, design)., • Working knowledge of aircraft manufacturing, instructions and blueprints, • Working knowledge of customer specifications and requirements, • Ability to use calipers, micrometers, etc., • Mastery of basic math (addition, subtraction, multiplication, division, and fractions), • Strong teamwork and communication skills to get along with co-workers and be a team player, • Understand and obey safety requirements, • Commitment to keep work area clean and free of debris, • Physical Requirements:, • Must be able to lift and/or move up to 50lbs, • Specific vision abilities include close and distance vision, depth perception and ability to adjust focus, • Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time, • Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law. Company DescriptionManufacturing excellence starts from within. Our teams collaborate and share knowledge across our facilities. We thrive through continual learning and mentoring. From apprenticeship to leadership, our people are proud of the important work we do.Manufacturing excellence starts from within. Our teams collaborate and share knowledge across our facilities. We thrive through continual learning and mentoring. From apprenticeship to leadership, our people are proud of the important work we do.

Job Description Scope: The Assistant Chief Engineer supervises maintenance and repair, and reports to the Chief Engineer. Primary Responsibilities: * Handling construction/remodeling projects with an emphasis in the scheduling and coordination of general contractor work. * Act as liaison between Engineering team and Chief Engineer, and other departments and guests as needed. Supervise the flow of information coming into the department to be sure all situations are being handled appropriately and assist with difficult calls. * Supervises and assists engineering staff in the maintenance and repair of plumbing, hotel rooms, A/C and heating, ice machine, swimming pools, lighting, kitchen equipment, refrigeration, laundry, emergency generators, switch rooms, etc. * Ensures all maintenance and repairs are completed on a timely, cost-effective basis and according to specifications. * Orders necessary materials and tools for repairing equipment and keeps within budgetary guidelines. * Maintains an ongoing preventative maintenance program for the hotel. * Responsible for administering and documenting equipment preventative maintenance and guest room preventative maintenance. * Responsible for the safety of the department and the building. * Provides a professional image at all times through appearance and dress. * Follows company policies and procedures and is able to effectively communicate them to subordinates. * Aggressively recruits and staffs department using company hiring standards (i.e. behavioral questioning, reference checks, evaluations and team interviews). Reviews performances and assists in career development. * Conducts training classes regarding safety, security, department procedures and service guidelines. * Ensures hotel is in compliance with all federal, state and local laws, including OSHA, EEOC, Wage Hour and Health laws. * Ensures all fire and safety inspections are completed and any discrepancies are corrected. Note: Other duties as assigned Chief Engineer and management External: Vendors: For purchasing and receiving supplies. Qualifications: Education/Experience: High School diploma or equivalent. Two years college/vocational training in electrical or mechanical engineering or plumbing plus 6 years' work experience, is preferred. Special consideration will be given to those who exhibit exemplary performance. Certification and/or License Requirement: Professional Certification and license if required by law. Minimum level 3 EPA Certification for refrigerant reclaim. Skills: Specialized technical crafts (electrical, HVAC, plumbing, etc.) Detail oriented Interpersonal skills Ability to train and lead others

Job DescriptionCompany Description Tessenderlo Kerley, Inc. is a company of diverse businesses unified by shared values and vision. We serve the agriculture, mining, industrial and water reclamation markets with a broad range of products and technologies, worldwide. Serving these customers well is a passion and a commitment-one that the people of Tessenderlo Kerley find rewarding, empowering and meaningful. If you want the work you do to make a positive impact on the world in which we live, and work alongside innovative, quality-focused people of vision, Tessenderlo Kerley is the right place for you. Job Description Are you a data-driven Business/Market Analyst with a passion for transforming insights into action? Do you thrive in a collaborative, cross-functional environment where your analytical skills can shape strategic decisions? If so, this is your opportunity to make a measurable impact on operations, profitability and market direction at Tessenderlo Kerley, Inc. Why Join Us? Influence Strategy – Analyze financial, operational, and market data to help guide high-level business decisions. Drive Efficiency – Collaborate with supply chain, sales, marketing, ICT, and finance to improve processes and performance. Leverage Technology – Use predictive analytics, visualization tools, and data modeling to turn complex data into actionable insights. Be a Strategic Partner – Help create unified business strategies through clear data storytelling and cross-functional collaboration. What You’ll Do ✅ Conduct in-depth market and competitor analysis to identify trends, risks and opportunities. ✅ Analyze financial and operational data to support cost-effective transportation and logistics strategies. ✅ Evaluate and establish KPIs and operational parameters that maximize fleet utilization and cost efficiency. ✅ Organize and synthesize data into meaningful insights that support informed decision making. ✅ Collaborate with departments across the business to align analytics with strategic goals. ✅ Prepare and deliver compelling presentations and dashboards to communicate insights to stakeholders. ✅ Support additional projects and initiatives as assigned. Qualifications What We’re Looking For ✔ A Bachelor’s degree in Business Administration, Finance, Economics or a related field. ✔ 5+ years of experience as a Business Analyst or in a similar data-intensive role. ✔ Advanced skills in Excel, PowerPoint, Word, Power BI and financial modeling tools. ✔ Proficiency in data visualization, statistical analysis and predictive modeling. ✔ Knowledge of SAP S4HANA tables is highly desired; familiarity with AI tools is a plus. ✔ Strong communication and presentation skills, with a knack for storytelling through data. ✔ Ability to work independently and collaboratively in a fast-paced, cross-functional environment. ✔ Must be able to work a standard Monday-Friday schedule, with four days onsite at our Phoenix, Arizona Corporate Office and one day with hybrid flexibility. Additional Information Why join Tessenderlo Kerley: Working at Tessenderlo Kerley • Work/life balance, • Fun and rewarding environment, • Learning, development and teamwork, • Community involvement/outreach, • Medical-Dental-Vision-Prescription (Low employee premiums!), • 401(k) plan with dollar-for-dollar matching up to the first 5% of employee contribution, • 401(k) company retirement contribution at year-end, equal to 4% of annual base salary, • Short-term incentive awards based on measured performance criteria, • Life Insurance (2x annual base salary), • Paid vacation and sick time, and 10 paid holidays per year, • Tuition Reimbursement: Up to $5,000 per calendar year (non-taxable), • Adoption Assistance: Up to $7,500 in reimbursement assistance, • Paid maternity and parental time off, • Business Travel Life & Accident Insurance, • Flexible Spending Account, • Telemedicine program for you and your dependents, • Long-Term Disability insurance Tessenderlo Kerley, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionMechanical Assembler II – First Shift Location: Phoenix, AZ Schedule: Monday – Friday, 6:00 AM – 2:30 PM About Cyclone Technology At Cyclone Technology, we build advanced surface cleaning systems that keep airports, municipalities, and contractors running at their best—all while protecting the environment. For over 30 years, our patented technology has set the standard in efficiency, durability, and water recovery, reclaiming up to 95% of water used and eliminating wastewater runoff. Join a team that takes pride in American-made innovation and sustainable impact. The Opportunity We’re looking for an experienced Mechanical Assembler II with a focus on large equipment and heavy systems. In this role, you’ll assemble, test, and refine high-performance machinery that combines hydraulics, pneumatics, and electrical systems. You’ll be hands-on with complex builds, contribute to process improvements, and mentor junior team members along the way. If you enjoy solving mechanical challenges and want your work to make a real-world impact, this is the place for you. What You’ll Do * Assemble large-scale industrial cleaning equipment using technical drawings, schematics, and instructions. * Integrate, test, and troubleshoot hydraulic, pneumatic, and electrical systems. * Perform quality checks to ensure every unit meets performance standards. * Maintain a safe, clean, and organized work area. * Collaborate with engineering and production teams to improve processes. * Train and guide Mechanical Assembler I team members as needed. What We’re Looking For * 3–5 years of mechanical assembly experience (industrial, automotive, or heavy equipment preferred). * Strong understanding of hydraulic and electrical systems. * Ability to read and interpret blueprints, wiring diagrams, and schematics. * Skilled with a variety of hand and power tools. * Strong troubleshooting ability and attention to detail. * Independent, reliable, and capable of meeting deadlines. * Solid communication and leadership skills. Preferred: * Technical/vocational training in mechanical or industrial systems. * Vehicle maintenance or mobile equipment service background. * Lean manufacturing or Six Sigma exposure. * Supervisory or team lead experience. Physical Requirements * Lift up to 50 lbs regularly. * Frequent bending, squatting, and standing for extended periods. * Comfortable in a fast-paced manufacturing environment. Why Join Cyclone Technology? * Be part of a growing company with over three decades of proven success. * Work on cutting-edge equipment that sets the industry standard. * Opportunities to learn, grow, and advance within the company. * Contribute to an environmentally responsible mission that makes a difference worldwide. If you’re ready to take the next step in your mechanical career and work on equipment that matters, we’d love to hear from you.

Job Description Job Title: Manufacturing Engineer Company: Custom Control Sensors, LLC Location: Phoenix, AZ Employee Type: Full Time – Exempt Industry: Manufacturing Job Type: Assembly Manufacturing Engineering Required Education: Bachelor of Science Degree or equivalent, in mechanical or manufacturing engineering. Master's preferred for Senior role. Required Experience: Level 1 - A related technical field with 0-2 years of related experience. Lean / Six Sigma certification desired. Must be computer proficient Level 2 - A related technical field with 2-5 years of related experience. Lean / Six Sigma certification desired. Must be computer proficient Senior - A related technical field with 5-10+ years of related experience. Lean / Six Sigma certification desired. Summary of Focus: Level 1 - Supporting processes, documentation, basic troubleshooting Level 2 - Process ownership, improvement, DFM, RCA Senior - Strategy, NPI, compliance, mentorship Key Technical Areas: Level 1 - Soldering, leak testing, pressure calibration basics Level 2 - PFMEA, SPC, signal integrity, fixture design Senior - Automation, compliance leadership, complex root cause Company Overview Custom Control Sensors, LLC (CCS) is a global leader in the design, development, manufacturing and supply of pressure, temperature and liquid flow switches and sensors for the Aerospace, Defense and Industrial markets. Since 1957, CCS has been providing high reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle pioneered by Custom Control Sensors. CCS’ Airborne Division provides standard and custom switches, sensors and transducers to the aerospace, defense, commercial aviation and government markets. CCS also supplies original PMA parts for various Boeing, Airbus and business aviation aircraft. CCS’ Industrial Division provides pressure and temperature switches, sensors and transmitters for process control of global oil & gas, petro-chemical, power generation, steel manufacturing, tire manufacturing, automotive, medical and various other industrial equipment. CCS is an ISO 9001and AS 9100 certified company. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. CCS is a growth-orientated company focused on building an energetic and vibrant work environment. We work to foster the interaction and collaboration between all associates at CCS, the connection with our customers and the opportunity for creativity. CCS is an established company with global resources offering individual opportunities to affect positive change. One person can make a great impact on our company’s success. Benefits: • Medical, • Dental, • 401k with Match, • Employer funded Life Insurance, Short-term Disability, and Long-term Disability, • Paid Sick and Vacation Leave, • Level 1 - Assist in supporting production and process improvements for aerospace-grade pressure switches and transducers. Gain hands-on experience with precision assembly, calibration, and inspection processes under the guidance of senior engineers., • Level 2 - Own and optimize manufacturing processes for aerospace pressure switches and transducers. Improve yields, throughput, and quality through data-driven analysis and process refinement. Support new designs through development to production. Level 1 • Support day-to-day manufacturing of pressure sensors, switches, and assemblies., • Assist with documentation of assembly procedures, calibration steps, and inspection protocols., • Help troubleshoot basic production issues, focusing on wiring, sensor alignment, and leak testing., • Collect and analyze simple manufacturing data (e.g., yields, rework rates)., • Assist with implementation of lean improvements in work cells., • Learn industry standards (AS9100, IPC-A-610, etc.) and support compliance., • Develop and optimize assembly and calibration processes for electro-mechanical pressure sensors., • Analyze failure data and lead root cause investigations (e.g., electrical drift, seal leaks, calibration drift)., • Implement process controls (PFMEAs, control plans, work instructions)., • Support NPIs and design-for-manufacturability (DFM) efforts for custom transducer designs., • Collaborate with quality engineering on nonconformance investigations and corrective actions., • Evaluate tooling and test fixture needs and manage change control documentation., • Ensure compliance with AS9100, FAA, and NADCAP standards as applicable., • Lead new product introduction (NPI) for complex pressure sensing and switching devices, from prototype through production ramp., • Develop robust, repeatable processes for soldering, calibration, testing, and potting., • Responsible for creating Assembly and Manufacturing Travelers and Standard Work Instructions;, • Maintain accurate documentation of processes, manufacturing procedures, material records, design concepts, tool/fixture drawings and shop orders in coordination with Engineering, Quality Assurance and R & D functions, • Design or oversee creation of custom tooling, test stands, and automated calibration fixtures., • Drive cost reduction, yield improvement, and reliability enhancements., • Collaborate with design, quality, and test engineering to ensure manufacturability and compliance., • Lead internal audits, support external regulatory audits (FAA, customers), and maintain AS9100 documentation., • Mentor junior engineers and provide technical leadership across manufacturing and test teams., • Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident., • Bachelor of Science Degree or equivalent, in mechanical or manufacturing engineering. Master's preferred for Senior role., • Must be Continuous improvement focused, • Team oriented and possesses flexibility and adaptability, • Ability to read, write, and follow written and verbal instruction in English, • Ability to work well with only a modest amount of instructions & directions, • Ability to sit for prolonged periods in front of a computer as necessary, • Exposure to electronics, precision assembly, or sensor technology is a plus., • Familiar with pneumatics, pneumatic gages and production high pressure lines & pneumatic test boxes and manufacturing tools for assembly is a plus, • Familiarity with CAD and basic data analysis (Excel, Minitab)., • Detail-oriented, with a desire to learn aerospace manufacturing standards and processes., • Familiarity with lean manufacturing methodologies, 6 S, Six Sigma tools, RCCA, PFMEA, DFM, and Kaizen events, • Familiarity with SolidWorks or a similar high-end CAD software, and good working knowledge of GD&T as per ASME Y14.5 is a plus, • 2–5 years of experience with electro-mechanical assembly, sensor calibration, or aerospace components., • Familiarity with leak testing, signal conditioning, and pressure calibration equipment., • Proficiency in root cause analysis and lean manufacturing tools., • Experience with ERP/MRP systems and controlled documentation processes., • Knowledge of lean manufacturing methodologies, Six Sigma tools, RCCA, PFMEA, DFM, and Kaizen events, • Support company goals, objectives, policies, procedures, good manufacturing practices, and regulations, • Experienced in pneumatics, pneumatic gages and production high pressure lines & pneumatic test boxes and manufacturing tools for assembly., • Experienced in installation and/or removal of production line equipment, • Experienced in designing/Updating new production tools to replace old and obsolete ones in production, • 5–10+ years in aerospace manufacturing of sensors, transducers, or similar precision electromechanical products., • Expert knowledge of pressure calibration, leak testing, electronics assembly, and sensor physics., • Strong understanding of aerospace regulatory requirements (AS9100, FAA PMA/TSO, IPC standards)., • Proficiency with ERP systems, statistical tools (Minitab, JMP), and quality documentation systems., • Proficiency with SolidWorks or a similar high-end CAD software, and good working knowledge of GD&T as per ASME Y14.5, • Knowledge of lean manufacturing methodologies, Six Sigma tools, RCCA, PFMEA, DFM, and Kaizen events, • Support company goals, objectives, policies, procedures, good manufacturing practices, and regulations, • Experienced in training employees on methods, tooling, and procedures for product assembly or fabrication, • Experienced in pneumatics, pneumatic gages and production high pressure lines & pneumatic test boxes and manufacturing tools for assembly., • Experienced in installation and/or removal of production line equipment, • Experienced in designing/Updating new production tools to replace old and obsolete ones in production, • Experienced in 6S concept and able to train & implement the concept on the production stations and tool cabinets storages Physical Requirements: The physical demand described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, talk or hear, flex/extend fingers with opposition of thumb; palmar grasp. The employee is frequently required to stand, walk, bend, and reach with hands and arms and to move within all areas of the facilities and parking lots. The employee is occasionally required to bend, turn push, pull and kneel. A computer is used to access, input and retrieve data. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination.

Job Description Location: Phoenix, AZ Schedule: Monday – Friday, 6:00 AM – 2:30 PM About Cyclone Technology At Cyclone Technology, we build advanced surface cleaning systems that keep airports, municipalities, and contractors running at their best—all while protecting the environment. For over 30 years, our patented technology has set the standard in efficiency, durability, and water recovery, reclaiming up to 95% of water used and eliminating wastewater runoff. Join a team that takes pride in American-made innovation and sustainable impact. The Opportunity We’re looking for an experienced Mechanical Assembler II with a focus on large equipment and heavy systems. In this role, you’ll assemble, test, and refine high-performance machinery that combines hydraulics, pneumatics, and electrical systems. You’ll be hands-on with complex builds, contribute to process improvements, and mentor junior team members along the way. If you enjoy solving mechanical challenges and want your work to make a real-world impact, this is the place for you. What You’ll Do * Assemble large-scale industrial cleaning equipment using technical drawings, schematics, and instructions. * Integrate, test, and troubleshoot hydraulic, pneumatic, and electrical systems. * Perform quality checks to ensure every unit meets performance standards. * Maintain a safe, clean, and organized work area. * Collaborate with engineering and production teams to improve processes. * Train and guide Mechanical Assembler I team members as needed. What We’re Looking For * 3–5 years of mechanical assembly experience (industrial, automotive, or heavy equipment preferred). * Strong understanding of hydraulic and electrical systems. * Ability to read and interpret blueprints, wiring diagrams, and schematics. * Skilled with a variety of hand and power tools. * Strong troubleshooting ability and attention to detail. * Independent, reliable, and capable of meeting deadlines. * Solid communication and leadership skills. Preferred: * Technical/vocational training in mechanical or industrial systems. * Vehicle maintenance or mobile equipment service background. * Lean manufacturing or Six Sigma exposure. * Supervisory or team lead experience. Physical Requirements * Lift up to 50 lbs regularly. * Frequent bending, squatting, and standing for extended periods. * Comfortable in a fast-paced manufacturing environment. Why Join Cyclone Technology? * Be part of a growing company with over three decades of proven success. * Work on cutting-edge equipment that sets the industry standard. * Opportunities to learn, grow, and advance within the company. * Contribute to an environmentally responsible mission that makes a difference worldwide. If you’re ready to take the next step in your mechanical career and work on equipment that matters, we’d love to hear from you.

Job DescriptionDescriptionResponsible for providing training and technical support to distributors, technicians, contractors, distributors, and installers. Takes a lead role to support resolution of technical issues with installed Franklin Fueling Electric Fueling Systems products. Gathers and clearly communicates site-specific data and installation information to aid with the proper application or troubleshooting of Franklin Electric Fueling Systems products. Key Responsibilities • Schedule and provide technical product training to distributors, installers, repair contractors, regulatory bodies, and others as needed., • Support testing and troubleshooting of Franklin Electric Fueling Systems products., • Provide onsite and virtual product support for Franklin Electric Fueling Systems products., • Acts as a liaison between customers, contractors, product management, and engineering departments., • Write and submit timely, accurate, complete, and concise reports documenting the involved, products, locations, retailers, distributors, contractors, problem descriptions, status, next steps, and other related information., • Able to read and understand detailed product descriptions, site plans and drawing, engineering and regulatory documents., • Able to use mechanical and electrical tooling such as pipe cutters, wrenches, voltmeters, etc., • Collect and report relevant information regarding customer needs, competitive products, changes in personnel at partner organizations, and other relevant topics., • Promote Franklin Electric Fueling Systems products and programs at tradeshows and special events., • Conduct product demonstrations as needed., • Ability to diagnose and solve problems in a dynamic environment., • Ability to clearly communicate in verbal, written, presentation, and other forms., • Public presentation skills including training of field personnel and speaking at industry events., • Writes reports, business correspondence, and policy/procedure manuals., • Calculates figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume., • Apply concepts such as fractions, ratios, and proportions to practical situations., • Defines problems, collects data, establishes facts, and draws valid conclusions., • Interprets an extensive variety of technical instructions in mathematical or diagram form and deals with several abstract and concrete variables., • Deals with problems involving several known variables in situations of routine nature., • Effectively communicates information and responds to questions in person-to-person and small group situations with customers, clients, the public, and/or other employees of the organization., • Solves practical problems and deals with a variety of variables in situations where only limited standardization exists., • Travels 75 percent of the time, including up to 50 percent overnight travel.Education and Experience, • Associate’s degree in business administration, computer technology, engineering, or a related field (required). Bachelor’s degree (preferred)., • Five or more years of technical, sales, or related industry experience highly preferred., • California Regulatory/CARB/Vapor Recovery experience highly experienced.Computer Skills, • Intermediate: Contact management, presentation/PowerPoint, spreadsheet, word processing / typing., • Basic: CAD / site plan scaling knowledge.Certificates and Licenses, • PEI or API certifications (Preferred) PHYSICAL ACTIVITIES, • While performing the functions of this job, the employee is:, • Continually required to stand and to talk or hear., • Regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl., • Occasionally required to sit, climb, or balance in construction site situations., • Specific vision abilities required by this job include close vision, color vision, and an ability to adjust focus., • The employee must regularly lift and/or move up to 25 pounds., • The company will make reasonable accommodations to enable individuals with disabilities to perform the essential functions and expectations.ENVIRONMENTAL CONDITIONS, • While performing the functions of this job, the employee is:, • Regularly subjected to outdoor weather conditions., • Occasionally subjected to work near moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals.

Job DescriptionCompany Description Tessenderlo Kerley, Inc. is a company of diverse businesses unified by shared values and vision. We serve the agriculture, mining, industrial and water reclamation markets with a broad range of products and technologies, worldwide. Serving these customers well is a passion and a commitment-one that the people of Tessenderlo Kerley find rewarding, empowering and meaningful. If you want the work you do to make a positive impact on the world in which we live, and work alongside innovative, quality-focused people of vision, Tessenderlo Kerley is the right place for you. Job Description Are you an experienced Electrical Engineer ready to take the next step in your career? Do you enjoy designing and troubleshooting complex systems while collaborating across disciplines in a fast-paced industrial environment? If so, we invite you to join our Technical Services team as an Electrical Engineer at our Corporate Office in Phoenix, Arizona! Our ideal location is the Phoenix area, where this position is based. However, for highly qualified candidates, we may offer hybrid or remote flexibility if you reside near one of our centrally located plants. Occasional onsite presence will be required for project execution, training, and plant support. Eligible plant locations include: * Ponca City & Tulsa Oklahoma * Coffeyville, Kansas * Billings, Montana * Defiance, Ohio Why Join Us? ⚡ Challenging & Varied Projects – Work on electrical design for industrial chemical facilities, from power distribution and schematics to plant support and turnarounds. Collaborative Environment – Partner with process, mechanical and instrumentation engineers, as well as plant operations teams. Grow Your Expertise – Gain exposure to client-facing work, capital project design and advanced electrical studies, with opportunities to take ownership of projects. Impact Beyond the Office – Travel to facilities (20-25%) to support installations, troubleshoot plant issues and guide safe, successful startups. What You’ll Do ✅ Develop electrical plans, specifications and calculations for small to medium projects with limited supervision. ✅ Perform short circuit analysis, arc flash studies, and power studies using ETAP or equivalent software. ✅ Troubleshoot electrical and signal issues; support I&E technicians on plant modifications or additions. ✅ Size equipment and specify components, including MCCs, switchgear, transformers and feeders. ✅ Review and redline P&IDs, drawings and specification sheets. ✅ Assist with project proposals, client meetings and scope development. ✅ Provide on-site support during plant startups, turnarounds and capital projects. ✅ Communicate effectively with clients, consultants, contractors and internal stakeholders. Qualifications What You’ll Bring ✔ A Bachelor’s degree in Electrical Engineering from an accredited university. ✔ 3-7 years of industrial electrical engineering experience (chemical, oil & gas, or heavy industrial preferred) ✔ Strong knowledge of electrical design fundamentals (grounding, wiring, schematics, lighting, cable tray, etc.) ✔ Proficiency in ETAP (or equivalent) for electrical studies; AutoCAD experience preferred. ✔ Working knowledge of NFPA codes (70, 70E, 496, 497, 655, IECC). ✔ Strong communication and teamwork skills; able to manage multiple project timelines. ✔ Willingness to travel 20-25% to support projects and plant operations. Additional Information Why join Tessenderlo Kerley: Working at Tessenderlo Kerley • Work/life balance, • Fun and rewarding environment, • Learning, development and teamwork, • Community involvement/outreach, • Medical-Dental-Vision-Prescription (Low employee premiums!), • 401(k) plan with dollar-for-dollar matching up to the first 5% of employee contribution, • 401(k) company retirement contribution at year-end, equal to 4% of annual base salary, • Short-term incentive awards based on measured performance criteria, • Life Insurance (2x annual base salary), • Paid vacation and sick time, and 10 paid holidays per year, • Tuition Reimbursement: Up to $5,000 per calendar year (non-taxable), • Adoption Assistance: Up to $7,500 in reimbursement assistance, • Paid maternity and parental time off, • Business Travel Life & Accident Insurance, • Flexible Spending Account, • Telemedicine program for you and your dependents, • Long-Term Disability insurance Tessenderlo Kerley, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionDescription: Position Summary: Cutter Aviation is seeking a highly skilled and motivated Aircraft Component Repair Technician to support our component repair operations and advanced aircraft systems development programs. The ideal candidate will contribute to component repair and overhaul (R&O), Supplemental Type Certificate (STC) efforts, prototype system builds, and test setups supporting engineering analysis. This hands-on role requires expertise in mechanical and/or electrical systems, experience in aircraft component service environments, and a strong interest in aerospace innovation. Key Responsibilities • Perform teardown, inspection, repair, and reassembly of aircraft components related to Cutter Aviation OEMs and systems., • Apply advanced knowledge of aircraft component repair techniques within a Part 145 repair station environment., • Use precision tools and diagnostic equipment to assess component conditions and ensure compliance with Component Maintenance Manual (CMM) specifications., • Maintain accurate records of work performed, parts used, and test results for traceability and regulatory compliance., • Support prototype system builds, hardware integration, and validation during development phases., • Assist engineers with test setups (mechanical, electrical, thermal, hydraulic) for performance analysis and FAA qualification., • Interpret and work from engineering drawings, specifications, and technical instructions., • Participate in STC development efforts, including conformity builds, modification center support, and documentation., • Fabricate or modify test fixtures, wire harnesses, and instrumentation as required., • High School Diploma or GED., • A&P certification or prior experience in aircraft MRO (maintenance, repair, and overhaul) environments., • 3+ years of experience in aviation maintenance, component repair, or R&D support., • Working knowledge of 14 CFR Part 145 operations and regulatory requirements., • Proficiency with aircraft tools, precision measuring instruments, and test equipment., • Strong foundation in mechanical and electrical systems used in general aviation and turboprop aircraft., • Ability to read and interpret engineering drawings and wiring schematics., • Experience with component repair, prototype fabrication, aerospace R&D, or flight test support., • Basic understanding of instrumentation, data acquisition systems, and sensors., • Sheet metal fabrication experience (a plus)., • Proficient in interpreting aircraft drawings and wiring diagrams., • Strong organizational, multitasking, and time management skills., • Proven problem-solving and analytical capabilities., • Primarily based in a shop/lab environment, with occasional field support for flight testing or mod center work., • Must be capable of lifting 50 lbs. and working in physically demanding conditions., • Attention to detail., • Persistence in the face of obstacles., • A willingness to take on responsibilities and challenges., • Being reliable, responsible, and dependable, and fulfilling obligations., • Being pleasant with others on the job and displaying a good-natured, cooperative attitude., • Being sensitive to others' needs and feelings and being understanding and helpful on the job., • Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods., • Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations. Join Cutter Aviation and become a key contributor to a growing, high-impact component repair and overhaul (R&O) operation supporting both in-service fleet support and advanced aerospace programs. Our dedicated facility offers hands-on involvement in the inspection, repair, and certification of a wide range of aircraft components, leveraging OEM partnerships, FAA Part 145 capabilities, and CMM-driven procedures.

Job Description About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. About Clayco Design and Engineering Clayco Design and Engineering (CDE) was created to diversify and grow Clayco's industrial business unit's capabilities with a focus on efficiently delivering robust design-build architectural and engineering solutions. The Clayco Design and Engineering team brings a tremendous amount of engineering expertise to the Clayco enterprise from a wide array of industrial segments such as food & beverage, consumer products, manufacturing, and life-science products. The Role We Want You For The Project Manager, Engineering – Mission Critical will lead multidisciplinary teams in delivering highly technical engineering design packages for Mission Critical and Data Center projects, supporting clients nationwide. This role requires collaboration with internal design and Construction teams, ensuring the successful execution of complex, fast-paced design or design-build projects that meet stringent uptime, scalability, and security requirements. The ideal candidate brings a deep understanding of high-performance environments and mission critical systems and will guide a team of engineers, architects, and designers through all project phases—from conceptual through final design and construction administration—while ensuring excellence in delivery. The Specifics of the Role • Lead engineering and design teams in executing projects that meet the rigorous demands of Tier-certified and mission critical facilities, including Uptime Institute, ASHRAE, and other industry standards., • Manage quality and technical excellence through structured design reviews and cross-discipline coordination., • Collaborate with clients to define functional and operational goals, including redundancy (N+1, 2N), energy efficiency (PUE), and capacity planning., • Oversee and ensure accuracy in submittal reviews, RFI responses, and onsite field verifications during construction., • Develop and review process and MEP engineering designs tailored for data center cooling, power distribution, and systems integration., • Present engineering solutions and updates to stakeholders, including clients, internal teams, and external partners., • Maintain proficiency in Microsoft Office Suite and utilize project management tools to track and report progress., • Exhibit strong written and verbal technical communication skills, including report writing and leading design presentations., • Apply knowledge of construction principles, mission critical technologies, and evolving design methodologies., • Drive cross-functional coordination and leadership in a high-performance team environment., • Bachelor's Degree in Engineering (Mechanical, Electrical, or related discipline preferred)., • 10+ years of engineering design experience, with a minimum of 3 years focused on Mission Critical / Data Center environments (colocation, hyperscale, enterprise)., • 2+ years of experience managing multi-disciplinary design teams, ideally on fast-track design/build projects., • Strong understanding of power systems, cooling technologies (e.g., CRAH, CRAC, chilled water), and BMS integration., • Familiarity with standards and certifications such as Uptime Institute Tier levels, NFPA 70E, ASHRAE 90.1/TC 9.9, and other relevant regulatory frameworks., • Experience with both greenfield and retrofit data center projects is a strong plus., • Competitive nature with a proactive approach to solving complex engineering and coordination challenges., • Effective communicator and technical leader with the ability to influence outcomes and manage client relationships., • Detail-oriented with a commitment to delivering designs that reflect the criticality and reliability expectations of mission critical environments., • Our clients and projects are nationwide – Travel will be required., • No other builder can offer the collaborative design-build approach that Clayco does., • We work on creative, complex, award-winning, high-profile jobs., • The pace is fast!, • 2024 Best Places to Work – Crain's Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal., • 2024 ENR Midwest – Midwest Contractor (#1)., • 2024 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5)., • Discretionary Annual Bonus: Subject to company and individual performance., • The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Job Description MEP Coordinator - Critical Facility Construction - Phoenix, AZ Our client is a leader in Critical Facilities Engineering Design and Commissioning that has a national footprint and specializes in MEP and Controls. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Responsible for field activities associated with the project, including supervision of all field construction and commissioning work by electrical and mechanical subcontractors and self-performed work. Keep in constant contact with Subcontractors to ensure timely work to keep project on time / within budget. Ensures equipment purchased is in onsite at the project when needed. Shares responsibility with the construction project manager for developing the project budget, actively participating in the preconstruction phase, and ensuring that the project is built on time, within budget, and according to company policies and procedures. Manages and mentors assistant project managers and other field personnel. Maintains a relentless focus on meeting and exceeding customer needs and expectations through the life of the project. Responsibilities: • Maintain liaison with primary client, A/E firm, Owner's Rep firm, Construction Project Manager, subcontractors and any other vendors needed to facilitate construction activities at the data center job site., • Establishes and manages the critical work environment project objectives, performance standards, planning and Methods of Procedure and be within boundaries of corporate policies to ensure minimization of human error factors which could cause down time during work processes, • Provides leadership of all field related MEP mission critical work activities and coordinates with Construction Project Manager and Subcontractors for proper execution., • Keeps all relative parties informed of project's progress throughout the life of the project., • Detailed understanding of all MEP systems to include size up, costs, scheduling timeline, quality control focus points, system start-up, commissioning, troubleshooting, etc., • Manage financial aspects of contracts (progress billing, rental equipment, income/expenses) to protect the company's interest and simultaneously maintain good relationship with the client., • Ensures that project site and company assets are secure and maintains a safe and respectful working environment at all times by implementing programs for safety / OSHA, Equal Employment Opportunity / EEO, risk management, training, and quality control., • Confirms that extra charges from subcontractors/suppliers are reasonable and work is correctly executed. Coordinates with project manager for approval on extra charges., • Facilitates weekly project progress and safety meetings with all subcontractor representatives and coordinates the upcoming week's work to be accomplished. Attends all progress meetings with the owner's rep / data center construction Project manager, • 5+ years of commercial / critical facilities MEP Construction experience. (project size, scope, and complexity the years of experience will also be a large factor), • Integrated Project Delivery (IPD) experience a HUGE plus!!, • Detailed understanding of Mechanical and Electrical systems to include integrated testing, MOPs / SOPs of installation, functionality and troubleshooting; etc., • Budget responsibilities must be in excess of 10mm - 50mm + to be considered., • Experience in directing and/or supporting the commissioning effort., • Demonstrates solid presentation, verbal, written and communication skills., • Demonstrates proficiency using a personal computer (PC) and company communication tools, such as email, internet, and Microsoft products (e.g., Word, Excel, Office, Outlook, PowerPoint, MS Project, Timberline, etc.)., • Previous administrative experience managing change orders, billing, creating reports, etc. After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: The Mechanical Engineer will work closely with design, construction, and commissioning teams to ensure the successful delivery of cleanroom projects that meet stringent specifications for air quality, temperature, humidity, and particulate control. The candidate must bring specialized knowledge in cleanroom standards, HVAC systems, and mechanical systems integration. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Perform requirements classification of clients, communicating project requirements and design review with internal & external design team for Mechanical System, such as, process exhaust duct, scrubber for waste air treatment, and dosing chemical., • Perform the required scope of work and clarify specification with stakeholders., • Assist procurement team on the procurement of Mechanical systems equipment & materials' and assist in contractors' awards., • Understand isometrics, P&ID and CAD drawings specifically for ME systems., • Review, approve and oversee the installation of ME systems., • Inspect work in progress to ensure that workmanship conforms with specifications and assure adherence to construction schedules., • Review progress reports, materials used and costs, contract payment application, and adjust work schedules as indicated by the reports., • Review & reply RFI (Request for information) and change orders., • Provide daily, weekly, and monthly reports for internal use and client communication., • Identify and solve problems., • Scheduling and schedule execution., • Understand drawing and review specifications and estimation. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: • Bachelor's degree in Mechanical Engineering, Construction Management, or a related field., • Strong understanding of process exhaust duct sizing & layout, mechanism of scrubber for waste air treatment., • Proficiency in Microsoft Office Suite products (Word, PowerPoint, Excel, Outlook, Teams)., • Ability to use engineering software, such as AutoCAD, Revit, Navisworks, Primavera, or others., • Excellent organizational and time management skills., • High level of attention to detail, and highly organized., • Ability to act with integrity, professionalism, and confidentiality., • Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees., • Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors., • Must be able to work under pressure and meet deadlines while maintaining a professional attitude., • Effective English verbal and written communication skills required., • Ability to communicate in Mandarin/Taiwanese is a plus., • Ability to effectively present information and respond to questions from groups of managers, customers, and employees., • Start-up experience., • Verbal communication skills in Mandarin. This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.

Job Description United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: We are searching for a skilled and dedicated Mechanical Engineer to join our team. The successful candidate will be responsible for designing, implementing, and maintaining air filtration systems in a cleanroom environment, ensuring compliance with semiconductor production regulations and standards. Experience in HVAC is highly desired. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Perform requirements classification of clients, communicating project requirements and design review with internal & external design team for Air Abatement System (AAS), such as, process exhaust duct, scrubber for waste air treatment, and dosing chemical., • Perform the required scope of work and clarify specification with stakeholders., • Assist procurement team on the procurement of AAS systems equipment & materials' and assist in contractors' awards., • Understand isometrics, P&ID and CAD drawings specifically for AAS systems., • Review, approve and oversee the installation of AAS systems., • Inspect work in progress to ensure that workmanship conforms with specifications and assure adherence to construction schedules., • Review progress reports, materials used and costs, contract payment application, and adjust work schedules as indicated by the reports., • Review & reply RFI (Request for information) and change orders., • Provide daily, weekly, and monthly reports for internal use and client communication., • Identify and solve problems., • Scheduling and schedule execution., • Understand drawing, and review specifications and estimation., • Other responsibilities as assigned. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: • Bachelor's degree in Mechanical Engineering, Construction Management, or a related field., • 0-5 years of work experience related to Mechanical HVAC. Direct AAS systems planning and/or construction experience preferred. Skills and Competencies: • Strong understanding of process exhaust duct sizing & layout, mechanism of scrubber for waste air treatment., • Proficiency in Microsoft Office Suite products (Word, PowerPoint, Excel, Outlook, Teams)., • Ability to use engineering software, such as AutoCAD, Revit, Navisworks, Primavera, or others., • Excellent organizational and time management skills., • High level of attention to detail, and highly organized., • Ability to act with integrity, professionalism, and confidentiality., • Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees., • Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors., • Must be able to work under pressure and meet deadlines while maintaining a professional attitude., • Effective English verbal and written communication skills required., • Ability to communicate in Mandarin/Taiwanese is a plus., • Ability to effectively present information and respond to questions from groups of managers, customers, and employees., • Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Nice to have: • Start-up experience., • Verbal communication skills in Mandarin., • Professional Engineer license. Additional Requirements: This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.

Job Description What you'll do: Lead the conceptual design effort on a variety of project types. Manage all aspects of a project's design with project management, architects, and other trades through the completion phase. What you'll need to be successful: • Supervises or directs the workflow of less-experienced engineers in performing HVAC or other system design and documents production of small and large projects, • Provides conceptual design for specific projects, • Serves as a design professional at project team design meetings, • Prepares complex preliminary redline design layouts for estimating, • Performs more complex calculations for a project, such as heating/cooling loads, equipment selection and sizing, friction loss calculations, etc., • Performs site inspections to determine compliance with construction documents and resolves design issues during construction phase, • Mentor other engineers and/or technicians on a project basis. What you bring to the table: • Excellent knowledge of applicable systems design, such as fire suppression, HVAC, plumbing, etc., as well as general understanding of system operations., • Ability to read mechanical and plumbing plans, • Excellent verbal and written communication skills and ability to communication with all levels of employees, clients and general contractors, • Strong public speaking skills, • Strong computer skills, including CADD and Microsoft Office Products, such as Excel, • Four-year degree in Engineering or related field, • PE License required, • 7 - 10 years proven design experience that matches the duties and behavior/leadership skills listed above

Job Description Veregy is an award-winning NAESCO-Accredited decarbonization company focusing on accelerating and simplifying the Energy Transition. We provide turnkey engineering and construction services designed to reduce our clients' energy and operating costs through the implementation of energy efficiency and infrastructure upgrades, smart building technology, fleet EV infrastructure, clean energy generation, and sustainability. Do you want to be part of a TEAM who delivers Eco-Friendly Environments that Transform Lives? Then you are in the right place…start the application process today! Summary of Position Functions The Project Developer – State and Local Government (SLG) focused will manage the development of Energy Efficiency projects in support of the Veregy sales teams that focus on selling to state and local government. This effort will include energy audits, energy conservation measures design, energy savings calculations, bidding and negotiating subcontractor costs, sales support and support the team responsible for construction of energy conservation projects. The Project Developer shall ensure the developed projects meet acceptability of budgets and timelines, conformance to federal and state laws and adherence to approved specifications (internal and customer). Essential Position Functions • Performs or supervises energy audits, energy modeling, measurement, verification, or retro-commissioning studies., • Provides guidance and leadership to junior staff., • Presents to a variety of audiences., • Leads energy-related design or construction issues, such as energy engineering, energy management, or sustainable design., • Analyzes, interprets, or creates graphical representations of energy data, using engineering software., • Attends relevant internal and external technical meetings and design reviews., • Communicates project expectations to team members and stakeholders in a timely and clear fashion., • Advises clients and colleagues on topics such as climate control systems, energy modeling, data logging, sustainable design, or energy auditing., • Participates in reviewing architecture, mechanical, or electrical plans or specifications to evaluate energy efficiency., • Ensures effective communication with clients, third parties and colleagues throughout the project life cycle., • Prepares energy-related project reports, like PFA and IGA and technical documentation in compliance with approved specifications and industry standards., • Researches the newest information in renewable or alternative energy systems or technologies., • Supports the sales teams and will involve extensive collaboration between both internal team members and customers., • Assists sales with funding sources and procurement paths., • Tracks activities and action items of projects within internal tracking platforms and ensure project deliverables meet deadlines., • Performs preliminary project site walks to identify EEMs and provide a unique solution customized to customer needs., • Provides technical expertise during sales’ presentations and meetings with customers., • Coordinates with customer representatives and utilities to gather billing and energy data to develop energy utility analyses to qualify project feasibility., • Innovates new ways to expand on and improve the development process through consistent communication with peers and other stakeholders. Non-Essential Position Functions To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Bachelor’s Degree in Mechanical Engineering or related fields like Construction Science, Construction Management, Architecture, Engineering or related field, or equivalent combination of education, training, and experience., • Experience with measures common in state and local government including water meter automated metering, wastewater treatment, water treatment, street lighting is required., • Two (2) years of experience in project development, more experience is required for more senior roles required., • Two (2) years of Energy Engineering experience desired., • One (1) year of experience in the following computer applications: MS Project, Microsoft Office applications, RS Means estimating, and any other company standard software preferred., • A track record of establishing and maintaining development and construction budgets as demonstrated by two verifiable references who will be contacted required., • Ability to quickly qualify project feasibility based on energy savings, project paybacks, customer needs, and applicable procurement and funding methods., • Ability to be customer-facing & a technical expert and the driver behind developing quality projects., • Ability to meet with customers and clearly communicate our process for working together., • Ability to guide salespeople on relaying project specifics to customers in cases where delays or complications may arise., • Ability to coordinate with sales team to develop project pricing and cashflow analyses., • Ability to take a leadership role on estimating projects from start to finish as shown by two verifiable references who will be contacted., • Ability to work independently and efficiently manage time/workload., • Ability to stay organized in a fast-paced environment with changing or competing priorities., • Knowledge of Veregy’s services and processes is required which can be obtained through intellect, technical inclination, and dedication to gain such knowledge., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Competitive Compensation., • Paid Holidays, Paid Sick Leave, and Paid Time Off., • Competitive Medical, Dental and Vision Plans., • 401k Retirement Plan with Matching Employer Contributions (%)., • Employer Sponsored Life Insurance and AD&D Insurance., • Employer Paid Short- and Long-Term Disability Insurance., • Continued Education and Trade Certification Sponsorship (Specific Positions). Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Equal Employment Opportunity has been, and will continue to be, a fundamental principle at Veregy, where employment is based upon capabilities and qualifications without discrimination because of race, color, religion, sex, age, national origin, disability, veteran status, genetic history, sexual orientation, or any other protected characteristic as established by law. #Veregy

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is seeking an experienced and charismatic Senior Solutions Engineer - Automotive Production for a critical customer-facing role. This role supports Sales by providing perspective, feedback, and sharing knowledge learned from the front lines of the automotive and production engineering and manufacturing community. This role is a unique blend of customer engagement, technical expertise, and project management. Solutions Engineering will report into the Pre-Sales Engineering community, which is dually led by Sales and Operations. This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a successful, experienced, team-focused engineer with digital fluency and a sincere enthusiasm about the automotive industry, this could be the right role for you. Responsibilities: • Customer Engagement and Sales: • Partner with Account Executives to drive account growth and retention, • Discover, illuminate, digest, organize and execute major projects., • Join Account Executives in onsite visits with customers when appropriate, • Proactively identify and address potential manufacturing challenges (including DFM), • Stay informed about upcoming customer projects and initiatives to ensure alignment with Xometry's capabilities, • Gather customer insights and feedback to inform sales strategies • Pre-Sales Engineering: • Assist Pre-Sales Engineering with knowledge gathering, digestion, and ultimately compiling correct and competitive quotes, • Combine customer knowledge, Xometry partner knowledge, and Xometry system knowledge to rapidly address customer needs and shepherd projects to delivery, • Provide project management and oversight on complex opportunities, • Fully own, from Discovery to Execution, 3-5 major projects, • 10+ years of relevant experience in automotive manufacturing and program management roles, • A bachelor's degree in Mechanical Engineering or similar is required, • Experience using Xometry's services from a customer perspective. Partner perspective is a bonus, • Deep familiarity with the methods, materials, culture and products of organizations such as Lucid, Rivian, Tesla, Ford, GM and their suppliers/partners, • Strong understanding of manufacturing principles, including drawings and GDT, • Particularly strong experience in Injection Molding required. Stamping, Castings, Forgings and other common production methods are bonus, • Familiarity with ISO9001, IATF 16949, APQP/PPAP and other industry certifications and practices, • Excellent communication, interpersonal, and problem-solving skills. This must extend into remote/digital environments, • Ability to travel to customer and/or partner sites as needed. 25%-35% travel is typical, • Mountain or Pacific home time zone preferred, • Experience with CRM systems such as Salesforce, • Proficiency in Google Suite and Microsoft Office Suite #LI-Remote Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description You already LOVE us and the SNACKS WE MAKE! Chips, Cookies, Crackers, Wafers, Cheese Curls, Popcorn, Tortilla Chips... yeah, we make them ALL! Shearer's is the company behind all your favorite snack brands. We have over 5,000 associates in 17 state-of-the-art manufacturing and warehouse sites in North America that produce over 800 million pounds of snacks per year. Did you know that we buy 20% of all the potatoes grown in the US? WOW! And we know what you're thinking…how can I get my hands on some free goodies? Our team members can take home free snacks! Maintenance Automation Controls TechnicianShifts Available:Days - 5:45 AM - 6:00 PM | 2,2,3 rotation scheduleNights - 5:45 PM - 6:00 AM | 2,2,3 ration schedule ($3.00 shift premium for Night shift)Pay Rate: $42.50/hour Your seat at the best snacks table This position is responsible for upkeep and maintenance of the controls and automation equipment which includes troubleshooting, performing program backups, and system upgrades. Direct involvement with cross-functional team that include safety, quality, engineering, and production. This position will provide technical guidance to other members of the maintenance team and other technical members of Shearers to develop higher controls capabilities across the network. Essential Duties and Responsibilities • Execute tasks in a safe manner. Embrace and help to develop a people safety first culture., • Perform advanced troubleshooting functions by using the PLC and HMI code to diagnose issues that are causing downtime., • Ownership of regular program backups and ensure that all program changes adhere to Shearer's safety and quality standards., • Perform all assigned maintenance tasks such as preventative maintenance, corrective maintenance, and inspections., • Develop and train maintenance personnel on control systems and functions., • Provide recommendations for equipment upgrades to avoid obsolescence issues., • Continually improve knowledge base regarding advances in parts, equipment, and processes to keep abreast of changes and innovations in equipment selection., • Develop and execute PM's on controls equipment and control cabinets, • Assist in the development of base line safe work performance expectations and work practices. Identify and correct any unsafe condition and identify and unsafe action observed. · Ability to make changes to existing PLC and HMI programs to improve the process. Knowledge Skills and Abilities • Full familiarity with computer programs such as Auto-Cad, Microsoft Office, etc., • Strong Electrical troubleshooting and understanding o RSLogix 500 o Studio 5000 o Connected Components Workbench (CCW) o FactoryTalk View Studio o MicroLogix o CompactLogix o ControlLogix o Panelview o Powerflex • Familiarity with high-speed manufacturing and packaging processes, operations and associated machinery., • Ability to read and interpret electrical, hydraulic, and mechanical prints., • ABB & Fanuc Robot programming (and others) Education and/or Experience Required The employee is regularly: • Required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear., • Occasionally required to sit. The employee must be able to enter, egress and traverse areas inside and outside of machinery, and must be able to climb ladders for purposes of inspection. The employee in this position works with safety critical products, therefore are required to have the ability to differentiate colors that are critical to job performance. Position requires climbing and balancing around and on top of machines while simultaneously using various hand tools. The employee must have full range of motion necessary for moving in and out of all positions. Employee must have good sensation essential to gauge heat exposure when working around hot equipment, dies or furnaces. Work Environment The employee is occasionally exposed to outside weather conditions and risk of electrical shock. The noise level in the work environment is usually moderate. This job is performed in a shop environment: hazardous materials; greasy, slippery factory floors. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. This job description will be reviewed periodically as duties and responsibilities change with business necessity. All job functions are subject to modification. We Offer a Feast of Benefits after 30 days Medical, Dental, Vision, Life, Flexible Spending Account, Retirement Savings Plan with Match, Short Term Disability, Long Term Disability, Group Critical Accident Insurance, Group Critical Illness Insurance, Employee Assistance Plan and numerous opportunities to volunteer in the communities in which we operate. Paid Time Off (PTO) available after 90-days. You will be considered for employment in our inclusive workplace Because at Shearer's, we are committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, protected veteran status, or any other characteristic protected by law. This is your invitation to apply now! [Maintenance] #hpind

Job Description Summary: ProperSys Corporation is a newly established U.S. subsidiary of Taiwan Puritic Corp which was founded in 1996. The company serves the constantly innovating semiconductor industry with high precision equipment, systems, and services. We deliver professional facility turnkey projects and system engineering services to the semiconductor fabrication industry. Semiconductor leaders choose us to participate their evolution and expansion because of our focus on high quality production and clean execution. ProperSys also specializes in providing the services for procurement and sales of consumable supplies and raw materials for hi-tech OEM/ODM semiconductor equipment. ProperSys Corporation is rapidly growing and expanding and is now looking for talented members to join our team. We are looking for two new BIM (business information modeling) modelers. Expert knowledge of BIM and Autodesk Revit software is required, as well as an understanding of engineering and architecture. You will be required to work closely with our lead engineer, modeling and presenting the concepts requested by these team members. The ideal candidate has previous experience in this field as well as good communication ability. Ability to communicate in Mandarin/Taiwanese is a plus. Essential Duties and Responsibilities: • Collaborate with architects and engineers on projects, • Responsible for proper set up and maintenance and management of large, federated building models involving 8-10 design and engineering disciplines or more, • Develop and maintain project templates, tool sets, families and libraries, • Provide training, support, and develop BIM standards and protocols, while ensuring data accuracy and consistency, • Be the point of contact for any technical issues related to Revit and continuously monitor and evaluate its use to identify areas for improvement, • Timely implementation of clash resolution of any issues, and data integrations for other disciplines according to an aggressive schedule, • Ensure the appropriate use of quality control standard and procedures for accurate and precise BIM Revit/AutoCAD work, measurements, documentation, analysis, and portrayal of incoming and existent data, • Responsible for the coordination of the design produced by the Engineering Team, Trade Contractors, and other third-party vendors under their direction, • Hand off the completed model/as-built to their facilities counterpart, • Determine the proper elements and scale for MEP systems and buildings, • Ensure integrity/quality of the models, • Ability to meet deadlines To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: • Proficiency in CAD drafting (Autodesk products preferred) and detailing for mechanical and process piping systems in commercial and industrial construction projects, • Demonstrated experience leading and managing teams of piping detailers/designers and scheduling of tasks, • Process piping detailing experience, • High-tech tools install knowledge, • Familiarity with commercial plumbing systems, • Demonstrated experience in AutoCAD, 3D Modeling and Navisworks software, • Ability to identify design issues and provide virtual simulations in 3D, • 8+ years of experience, preferably in a fast-paced work environment, • Experience in a construction environment or similar industrial setting Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Ability to communicate in Mandarin/Taiwanese a plus. Computer Skills: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit. The employee is frequently required to walk. The employee is occasionally required to stand; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Job Type: Full-time Benefits: • 401(k), • Health insurance (100% covered by the company), • Dental (100% covered by the company), • Vision (100% covered by the company), • Paid time off, • Paid Holidays Schedule: 8-hour shift

Job Description Job Title: Mechanical Engineer Location: Goodyear, Arizona Department: Engineering Reports To: Manager of Mechanical Engineering Employment Type: Full-Time | On-Site About GTI Fabrication GTI Fabrication is a leading manufacturer of modular metal enclosures and engineered structures for industries including defense, energy, and infrastructure. Our products are designed and fabricated with a focus on durability, performance, and customization—making us a go-to solution for mission-critical applications. Position Summary GTI Fabrication is seeking a Mechanical Design Engineer to support the development of prefabricated steel enclosures and modular systems. This role involves using SolidWorks and AutoCAD daily to create technical drawings, perform analysis, and collaborate with engineers and production teams to bring engineered-to-order solutions to life. Key Responsibilities • Develop detailed 2D and 3D mechanical design drawings using SolidWorks and AutoCAD., • Perform CFD (Computational Fluid Dynamics) and thermal analysis on container-based HVAC systems., • Conduct FEA (Finite Element Analysis) on steel weldment structures and custom metal assemblies., • Interpret engineer markups to modify technical schematics and construction documents., • Collaborate with cross-functional teams to ensure manufacturability and adherence to specifications., • Apply knowledge of ISO container construction, sheet metal, and modular fabrication methods., • Support project deliverables on time, ensuring quality and accuracy., • Uphold punctuality and maintain compliance with GTI safety standards. Required Qualifications • Associate degree or equivalent from a technical school or vocational program., • 7+ years of experience in mechanical design or drafting., • Proficiency in SolidWorks, AutoCAD, and familiarity with BIM platforms., • Experience with sheet metal, weldments, and metal framing., • Strong analytical, communication, and documentation skills., • Competency in Microsoft Office tools (Excel, Word, Outlook)., • Familiarity with modular or prefabricated construction methods., • Ability to work independently and as part of a fast-paced engineering team. Preferred Qualifications • Bachelor’s degree in Mechanical Engineering., • Experience with design for manufacturing (DFM) principles., • Exposure to containerized systems or heavy-gauge metal fabrication. Work Environment • Office-based with occasional travel to production floor and project sites (up to 10%)., • Daily tasks require extended periods at a desk using CAD software., • May need to walk through an active warehouse with heavy machinery and equipment (PPE required).

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is seeking an experienced and charismatic Senior Solutions Engineer for a critical customer-facing role. This role supports Sales by providing perspective, feedback, and sharing knowledge learned from the front lines of the aerospace and defense engineering and manufacturing community. This role is a unique blend of customer engagement, technical expertise, and project management. The Senior Solutions Engineering will report into the Pre-Sales Engineering community, which is dually led by Sales and Operations. This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a successful, experienced, team-focused engineer with digital fluency and a sincere enthusiasm about the aerospace industry, this could be the right role for you. Responsibilities: • Customer Engagement and Sales: • Partner with Account Executives to drive account growth and retention, • Discover, illuminate, digest, organize and execute major projects, • Join Account Executives in onsite visits with customers when appropriate, • Proactively identify and address potential manufacturing challenges (including DFM), • Stay informed about upcoming customer projects and initiatives to ensure alignment with Xometry's capabilities, • Gather customer insights and feedback to inform sales strategies • Pre-Sales Engineering: • Assist Pre-Sales Engineering with knowledge gathering, digestion, and ultimately compiling correct and competitive quotes, • Combine customer knowledge, Xometry partner knowledge, and Xometry system knowledge to rapidly address customer needs and shepherd projects to delivery, • 10+ years of relevant experience in aerospace and defense engineering and manufacturing roles, • A bachelor's degree in Mechanical Engineering is required, • Experience using Xometry's services from a customer perspective. Partner perspective is a bonus, • Deep familiarity with the methods, materials, culture and products of organizations such as Lockheed Martin, Northrop Grumman, Blue Origin, Anduril, General Dynamics, Moog, SpaceX, • Strong understanding of manufacturing principles, including drawings and GDT, • Particularly strong experience in CNC machining. Composites, Plastics, Harnesses and Sheet Metal Fab are bonuses, • Familiarity with ISO9001, AS9100d, ITAR, NIST and other common and critical compliance and certification requirements, • Excellent communication, interpersonal, and problem-solving skills. This must extend into remote/digital environments, • Ability to travel to customer and/or partner sites as needed. 25%-35% travel is typical, • Mountain or Pacific home time zone preferred, • Experience with CRM systems such as Salesforce, • Proficiency in Google Suite and Microsoft Office Suite #LI-Remote Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description Position Summary The scope of work for the position is to guide, train, and assist with directing the job tasks as well as perform construction and related functions such as, but not limited to, the essential duties listed below. Essential Duties & Responsibilities · General Excavation utilizing earth moving equipment (Backhoes/Mini Excavators) on or around Pipelines and other underground utilities · Backfill and compaction · Lead assigned projects, crews, and company equipment · Work independently or with crews · Drive company vehicle responsibly and also perform regular maintenance, cleaning of vehicle and equipment · Perform Job Safety Analysis on daily basis · Fill and turn in Field/Project/Safety documents by paper or digitally · Represent ACCI and interact with clients to provide customer service · Project, material, equipment and crew coordination · Report job status to Foreman/Field Supervisor/Project Manager · Visual inspections of company DOT vehicles and equipment Construction duties in the following areas: · Use of hand and power tools to dig around existing utility structures to prevent damages · Engages in general basic electrical work (low voltage, wiring and testing) · Reading and following project documentation and instructions · Operation of small construction equipment · Use of voltage meters · Pipeline/Utility structure locating · Load and unload equipment and materials · Excavation and potholing · Underground and above ground conduit work · Low voltage wiring · Installation of electrical panels · Keep worksite clean and organized free from hazards · Lifting and handling 50+ lbs. material bags · Perform Cathodic Protection/Corrosion prevention tasks and services for gas, oil, and water pipelines and facilities, including power company facilities Additional duties: · Maintain all industry required Operator Qualifications · Driving company DOT vehicles · Additional duties may be assigned · Perform other responsibilities as requested by leadership Supervisory Responsibilities · This position does not have supervisory responsibilities Education and Experience · High school diploma or equivalent required · Backhoe/Earth Moving Operating – MINIMUM 4 years' experience required · 4 years or greater of Construction field experience preferred · Strong Desire to learn a new trade • Valid driver's license and acceptable driving record per insurance requirements, • Must pass pre-employment DOT drug screening and physical as well as being subject to random drug testing throughout employment, • Must pass client required Operator’s Qualifications (“OQ”) Knowledge/ Skills /Abilities · Proven experience operating heavy machinery to excavate underground pipelines or utilities required. · Must have ability to work and communicate with all levels of employees and Clients · Ability to perform work unsupervised · Mechanical and Electrical aptitude preferred · Operating construction power tools and equipment experience preferred · Obtain and pass OSHA 30 training required · Obtain and pass other safety trainings/certifications · Ability to read, write, and communicate in English to ensure safe and efficient operations · Responsible and self-motivated · Commitment to doing quality work while putting safety first Physical Demands and Work Environment · Frequent travel required (with overnight stay) · Frequent overtime required · Work outdoors in various climates including extreme weather conditions · Ability to work in prolonged and repeated: lifting up to 50 lbs. or more, standing, climbing, kneeling, reaching, feeling, crouching and crawling. · Ability to physically and visually follow worksite safety instructions · Work is performed with a medium to high risk of potential industry hazards and heavy equipment · Driving a vehicle to and from work sites in all types of weather conditions and in heavy traffic and/or at night Full-Time Position Benefits: 401(k), 401(k) matching, Dental insurance, Disability insurance, Employee assistance program, Employee discount, Health insurance, Health savings account, Life insurance, Paid time off, Parental leave, Professional development assistance, Referral program, Retirement plan, Tuition reimbursement, Vision insurance Company Description Accurate Corrosion Control, Inc. “ACCI” is a full-service Corrosion Control Mitigation Company specializing in providing corrosion control materials, construction and Cathodic Protection services working mainly in Arizona and surrounding states as a cathodic protection utility contractor. Additional Comments: The essential functions have been provided as examples of the type of work performed by employees assigned to this job classification. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The Company reserves the right to modify the work assignments and/or to make reasonable accommodations so that qualified employees can perform the essential functions. The job description is not intended to be an all-inclusive list of duties and responsibilities. It is intended to describe the general nature of the position. Company DescriptionACCI, EXCELLENCE SINCE 1984 Accurate Corrosion Control, Inc. (ACCI) is an employee-owned corporation specializing in corrosion control and cathodic protection. Established in 1984 in Phoenix, Arizona, the Company maintains the same high standards it was founded on over 40 years ago. ACCI provides quality corrosion control engineering, monitoring, installation and materials, on time and within budget.ACCI, EXCELLENCE SINCE 1984\r\nAccurate Corrosion Control, Inc. (ACCI) is an employee-owned corporation specializing in corrosion control and cathodic protection. Established in 1984 in Phoenix, Arizona, the Company maintains the same high standards it was founded on over 40 years ago. ACCI provides quality corrosion control engineering, monitoring, installation and materials, on time and within budget.

Job Description We are seeking a skilled and motivated Engineering Technician to support operations at our automated solar panel production facility. This role is critical in maintaining, troubleshooting, and optimizing automated manufacturing equipment and processes. The ideal candidate will have a strong background in automation, robotics, and industrial control systems, along with hands-on mechanical and electrical skills. Duties and responsibilities: • Support and maintain automated production equipment, including robotic arms, conveyors, vision systems, and PLC-controlled machinery., • Troubleshoot equipment faults in real time to minimize production downtime., • Perform preventative maintenance and diagnostics on mechanical, electrical, and control systems., • Assist engineers in the installation, testing, and commissioning of new automated equipment and process upgrades., • Monitor equipment performance and contribute to continuous improvement initiatives for cycle time, quality, and reliability., • Read and interpret technical schematics, wiring diagrams, and equipment manuals., • Interface with software platforms such as SCADA, MES, or HMI systems to diagnose and adjust system parameters., • Document work performed and communicate findings and recommendations clearly to engineering and production teams., • Collaborate with cross-functional teams including production, quality, and engineering to resolve technical issues., • Ensure compliance with safety regulations and standard operating procedures (SOPs). Qualifications: • Associate degree in Electromechanical Engineering, Mechatronics, Industrial Automation, or a related field; or equivalent experience., • Minimum 5 years of experience in a manufacturing environment, preferably in an automated or high-tech facility., • Strong knowledge of industrial automation systems, including PLCs (e.g., Allen-Bradley, Siemens), sensors, actuators, and drives., • Experience with robotics (Fanuc, ABB, KUKA, etc.) and automated assembly systems., • Ability to work with both mechanical and electrical systems., • Strong troubleshooting and problem-solving skills with a hands-on approach., • Familiarity with Lean Manufacturing and Six Sigma principles is a plus., • Excellent communication skills and ability to work both independently and as part of a team. Knowledge, Skills, and Abilities: • Experience in solar panel or semiconductor manufacturing., • Familiarity with data acquisition systems, SCADA, or MES., • Basic programming experience in PLC ladder logic or structured text., • Ability to analyze system data and recommend improvements for automation and throughput. Working conditions: • Able to work extended hours as needed, • Continuous exposure to extreme heat, extreme cold, and extreme noise, • Must wear protective Automation while at the location, • May be required to work after hours and on weekends or holidays Physical requirements: • Requires prolonged standing, walking, sitting, lifting, pushing, pulling, and climbing to a significant degree, • Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20pounds or force frequently, and/or up to 10 pounds of force constantly to move objects, • While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees/visitors as well as function safely around Automation, • Must be able to perform all job functions which include, but may not be limited to, pushing, turning, and/or pulling of controls EEO/AA Statement American Panel Solutions is an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

Job DescriptionAs Accenture continues to grow, we have an increasing number of career opportunities available to you. Depending on the job and location, you may be directed to apply with Accenture Infrastructure & Capital Projects LLP or one of the following Legal entities: • You’ll develop a standardized cost reporting framework for reviewing and validating Colocation Developers’ base building construction costs, preparing estimate evaluation reports based on ROM, Schematic, or Construction pricing., • You’ll review and validate project scope against predefined demarcation matrices, highlighting deviations, cost impacts, and assumptions or exclusions from developers, AEs, GCs, and Clients., • You’ll develop reports aligned with Clients’ Work Breakdown Structure (WBS) categories and provide summaries of Site & Shell / Increment 0 / Increment 1-N construction phasing., • You’ll analyze developer data center construction costs against market intelligence and parametric benchmarks, factoring in Value Engineering cost options for Client consideration., • You’ll review developer security costs against Client benchmarks and capture all supporting assumptions and exclusions., • You’ll track design changes between estimate revisions, reporting on cost and schedule impacts., • You’ll coordinate with in-house commodity teams to leverage current market intelligence for accurate cost evaluations., • You’ll liaise with Client stakeholders and partner teams, including Energy Location Services (ELS), Central Estimating, and others to align on estimating and program costs., • You’ll prepare and provide high-level ROM estimates to support program planning, annual capex planning, and pipeline projects., • You’ll develop cost modeling tools to generate high-level estimates, improve benchmark capture, and perform additional duties as assigned., • Remote: This role allows for remote work for the majority of your work hours., • With all our roles, there is some in-person time for collaboration, learning and building relationships with clients, peers, leaders and communities. As an employer, we will be as flexible as possible to support your specific work/life needs.HERE’S WHAT YOU’LL NEED:, • Bachelor’s degree or equivalent, • Minimum 6 years of cost management or estimating experience, • Data Center and Commercial experience, • Experience as a Cost Manager/Estimator with large-scale infrastructure projectsBONUS POINTS IF YOU HAVE:, • Proficiency in CostX, Bluebeam, Excel, and Accubid software, • Strong capabilities in Google Sheets or Microsoft Excel, • Knowledge of relevant construction technologies and trends (Sustainability), • Experience estimating Electrical in both MV and Low voltage (480v / 277v, 120 / 208), • Familiarity with estimating Fire Alarm, Security, EPMS, Telecom, Fiber, • 2+ years of on-site field experience, • Industrial experience (Food & Beverage, Laboratories, Waste Water Treatment Plants, Manufacturing, Agriculture), • Conceptual and hard roll estimating skills, • Ability to provide value engineering options, • Proficient in market trends, • Ability to establish relationships with stakeholders

Job DescriptionABOUT CIM GROUP:CIM is a community-focused real estate and infrastructure owner, operator, lender, and developer. Our team of experts works together to identify and create value in real assets, benefiting the communities in which we invest. Back in 1994, our three founders focused on projects in Southern California neighborhoods. Today, we are a diverse team of 1,000+ employees with projects across the Americas. Our projects have delivered jobs; created comfortable places to live, work, and relax; and provided necessary and sustainable infrastructure. Our focus on enhancing communities is unwavering, and we strive to make an even greater impact in the years to come. Join us and make an impact today! POSITION PURPOSE:The Service Manager is responsible for directing building maintenance operations and maintaining the buildings’ mechanical systems according to CIM Group’s operating and safety standards. This position will, under the direction of the Property Manager, identify all building equipment systems and create a preventive maintenance program for each building, supervise turnover work and seek to complete as much of the unit repairs in house as possible. ESSENTIAL FUNCTIONS: • Ensure scheduled preventive maintenance tasks are completed in accordance with the monthly maintenance calendar and direct either CIM maintenance technicians or third-party vendors to complete the necessary preventive maintenance work as scheduled or budgeted., • This position is responsible for oversight of the maintenance team’s efforts in completing each building’s preventive maintenance schedule which will include inspecting HVAC, refrigerator, sinks, washer/dryers, and others as directed by the Property Manager., • Work closely with the Property Manager in completing common area and/or exterior preventive maintenance such as roofs, exterior doors, windows, drain lines and others as directed by the Property Manager., • Closely track, monitor and follow up on residents’ work orders and schedule work using a third-party vendor with Property Manager’s approval for work that cannot be completed by the CIM maintenance team., • Responsible for adhering to the approved operating budget for all repair and maintenance expenses and provide the following operating cost estimates for budgeting purposes: (i) turn over, (ii) plumbing, (iii) electrical, (iii) HVAC and boiler, (iv) building RM, and (v) preventive maintenance work., • Meet with the Assistant Property Manager on a weekly basis to ensure all work orders are responded to within 24 hours, maintain a binder with tabs for each unit, including ground floor and management office and print out each tenant work order. Meet on Monday to review the printed work orders and the following Friday to confirm status of completed work orders., • Responsible for inventory control of all appliances, tools, supplies and equipment related to repairs and maintenance., • Direct maintenance operations for upkeep of the apartment units by the minimum repair standards Including but not limited to:, • Doors re-key, hang, paint and replace door and test door closings., • Attach window blinds, hang furniture., • Appliances replace filters, check drain lines and pans and know how to operate all systems including high end models in order to assist residents as required., • HVAC replace filters, wet vac condensation pans, verify thermostat settings and know how to operate the unit in order to assist residents as required., • Plumbing snake and clear blockages up to 25 feet., • Replace electrical sockets, switches, bulbs and check breakers., • Flooring re-attach thresholds, re-tack carpet, and replace missing wood or tile flooring., • Walls repair drywall, mud, tape and paint or wall paper as required., • Ceiling repair drywall, mud, tape and paint., • Maintain engineering office with tools organized, supplies inventoried and neatly stacked or organized and maintain maintenance files as requested or required by the Property Manager and/or CIM standards., • Identify appliances that need to be replaced and with the Property Manager’s approval ensure all appliances are properly disposed off and only removed from the building with prior written approval., • Required to repair and/or maintain items to the standards identified as they pertain to each building or property, including but not limited to:, • Doors re-key, hang and adjust as required., • Fix irrigation leaks as they occur., • Replace burnt out bulbs., • Work with Property Manager to ensure central plant equipment is under contract and properly maintained., • Windows are re-caulked as required., • Work with Property Manager to ensure the roofs are inspected twice a year and adequately maintained., • Work with Property Manager to ensure all equipment related to access devices is under contract and properly maintained., • Work the Property Manager to ensure parking equipment is under contract and properly maintained. SUPERVISORY RESPONSIBILTIES:, • Manage the maintenance team members., • Manage third party vendors (as required) who maintain access equipment (elevators/ escalators), central plant and other building equipment., • Ensure all vendors sign in and out of the property and control access to the roof and mechanical rooms., • Set performance goals for each member of the team and review their performance on an ongoing basis. EDUCATION/EXPERIENCE REQUIREMENTS (including certification, licenses, etc.):, • High school/GED or 3-5 years in a comparable position., • At least three years of demonstrated experience working in apartment buildings’ maintenance and two years’ experience as a lead and/or maintenance supervisor., • Must possess a valid state-issued driver’s license., • EPA certification Type I and II (as required)., • MS Office including Excel, Word, Outlook., • Experience with HVAC systems’ maintenance and repair., • Experience with plumbing and electrical system maintenance and repair., • Other general maintenance experience such as carpentry, painting and drywall repairs, appliance maintenance and keying and/or replacing unit doors. KNOWLEDGE, SKILLS, AND ABILITIES:, • Read and interpret documents such as new appliance maintenance manual, company policies and procedures documents., • Ability to write correspondence and/or reports accurately in a concise and detail manner., • Ability to respond to common inquiries or complaints from tenants, regulatory agencies, other areas of the company, and/or members of the business community., • Ability to effectively present information to management, tenants and others., • Ability to apply common-sense understanding to carry out instructions., • Ability to solve practical problems., • Ability to define problems, collect data, establish facts and draw valid conclusions.PERFORMANCE METRICS:, • Meet stated Investments approved operating budgets based on leasing objectives, cost control and annual NOI., • Manage each buildings preventive maintenance calendar and schedule with a goal to minimize use of third-party vendors. #LI-KO1

Job DescriptionAbout Carvana "We believe CVNA is in the early stages of becoming the next U.S. retail category killer." – Stephens Investment Bank, Analyst Report, Sept. 2024 Building leading-edge technology has been at the core of Carvana's strategy since our founding, driving us to become the 3rd fastest company in history to organically reach the Fortune 500 following only Amazon and Google. Today, we remain founder-lead and as ambitious as ever. In 2024, we have not only emerged as the fastest growing automotive retailer, but also the most profitable thanks to our deep vertical integration across retail, lending, vehicle transportation, wholesale auctions, and more. If you want to grow not just as an Engineer but as a leader and business-builder, Carvana is the place for you. Our technology teams build: • End-to-end ecommerce for both selling and buying cars, including everything you see on Carvana.com and in our mobile apps., • AI-driven customer support across chat, email, SMS, and voice, as well as a proprietary CRM platform to ensure the most efficient and highest quality customer experience., • 360°ree; vehicle photography and interactive merchandising using cutting edge computer vision and AI techniques., • The most sophisticated and self-service automotive lending platform in the world., • Systems and tools behind a nationwide logistics network that has delivered and picked up over 3 million cars via our fully owned and operated fleet of automotive haulers, efficiently managing distribution of our massive inventory to 85% of US driveways., • Enterprise grade systems for operating the largest vehicle reconditioning facilities in the US, with workflow and automation to guide the work for everything mechanical, electrical, and cosmetic needed to bring each car to our high standards. This is a fully on-site position, Monday through Friday, at our corporate HQ in Tempe, Arizona. About the team and position: Carvana's DevSecOps team builds and supports the greatest things you'd find in and around Carvana.com! This role ensures that our applications, services, and websites are designed and implemented with security by design, while also fortifying our security infrastructure. You will be responsible for discovering and addressing security risks, issues, and threats across the entire development lifecycle. This includes building security automation to enable secure development practices, evangelizing security with our engineering teams, and working closely with our Principal C# Engineer and Senior DevSecOps Engineer to fortify our Identity Provider (IdP) systems, manage edge security processes, and ensure the integrity of our microservices architecture. What you'll be doing... • Collaborate with infosec, appsec, engineering teams, product managers, and other stakeholders to solve complex auth and security challenges., • Design, develop and deploy solutions to ensure that data, users' identities, and authentication processes are secure and compliant with industry standards., • Work with cloud systems, pipelines, and resources., • Learn and implement the evolving security & authentication standards, technologies, approaches, and participate in bringing software engineering in Carvana to the next level.What you should know..., • At least 4 years of software development, with consistently advancing skills and responsibilities, • Experience with microservice driven web application development, • Expert level knowledge of identity solutions and related integrations such as Okta, Auth0, Duende, and similar IdP platforms., • Expert level knowledge of authentication and authorization standards, protocols, and frameworks such as OpenID, OAuth2, SAML, JWT, X.509, MTLS, DPoP and key related security concepts such as MFA., • Strong level experience integrating applications with IdP providers for SSO., • Experience implementing RBAC and ABAC models., • Experience developing federations, integrations or customizations of the identity platforms needed to meet the business objectives., • Experience conducting threat modeling and risk assessments of access systems, demonstrating clear ability to identify design flaws., • Good communication and collaboration skills - Carvana developers work very closely with strong supporting teams and require great interpersonal skills including a positive attitude and sense of humorIt would also be great if you had..., • Understanding of .NET Core and C#, • Experience working in a cloud-based software development environment, preferably with Azure, • Experience in container-oriented architecture using Docker and Kubernetes, • Experience with reverse proxies such as Nginx, etc., • Understanding of DevOps best practices and principlesWhat we'll offer in return, • Be part of a forward-thinking team that values innovation and collaboration., • Opportunity to work on cutting-edge technology solutions., • Comprehensive compensation package including competitive salary, 401K with company match, a wide range of perks (such as student loan payments and vehicle discounts), and a robust wellness program., • Extensive professional development opportunities including training., • Scholarships and discounts for ASU Online. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description PROJECT MANAGER, INSPECTION CENTER, STRATEGY AND PLANNING About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards. We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise. Think you've got what it takes to join our team? Keep reading below to see what we're looking for! About the team and position Carvana is seeking an experienced Project Manager to drive the successful execution of initiatives spanning across our Inspection Center organization. The Project Manager will have the unique opportunity to implement the best-fit project management practices and methodologies across the Inspection Center organization with the goal of driving success in executing project operations associated with the organization's top initiatives. We are seeking a driven and organized individual who has the ability to successfully execute in an ambiguous, fast-paced environment. What you'll be doing • Leverage experience to lead multiple high-priority initiatives and projects by successfully collaborating, communicating and prioritizing across essential stakeholders to ensure goals are achieved, • Train and coach teams on project management methodologies, processes and applications (e.g. Wrike), • Successfully execute full-cycle project management duties to meet project goals within given constraints (define goal, scope, deliverables, resources, budget and timeline; planning, monitoring and controlling during execution and finally, closing), • Perform day-to-day administrative tasks in the project management software system (permissions management, user management, and structure management), • Effectively work through areas of ambiguity and complexity by demonstrating the initiative to execute to best meet our business needs; this role demands the ability to plan, navigate, and execute projects of varying complexity, timelines, and scope simultaneously with minimal guidance, • Utilize knowledge of the business and the Inspection Center organization to support viable and lasting project management methodologies, frameworks and solutions across the organization, • Develop analytical frameworks, present models, drive analysis, and uncover insights on projects to inform operational decisions and provide direction to senior management, • Maintain focus on executing project plans within time and resource constraints by successfully mitigating risk throughout the project life cycle, • Identify operational weaknesses and risks, and help innovate or improve processes, • Take a proactive approach to identify operational weaknesses and risks, and help innovate or improve processes, • Leverage business acumen to effectively prioritize initiatives; always considering the impact to Carvana, • Build strong relationships and work cross-functionally (internally and externally) with the necessary partners to support project initiatives, • Effectively partner with stakeholders to determine the needs of their departments from a Project Management standpoint to define project requirements, project plans and project status reports and create/deliver communication plans to leadership; build, maintain, and communicate portfolio and/or project performance and progress across Inspection Center platform and stakeholders, • Coach and lead others on project management best practices, strategic thinking, and prioritization, • Bachelor's degree required and a minimum of 5 years working experience in Project Management (preferably in a fast-paced, production environment), • Experience leading cross-functional project teams through Initiation, Design, Planning, Execution and Close phases for large-scale, complex and ambiguous initiatives, • Experience working across different business units (specifically HR, IT/technology, construction, engineering, procurement, operations) to communicate project vision, develop plans and drive change, • Self-starter attitude with the ability to drive excellence and meet high standards, • Fast learner with the ability to make decisions, problem solve, prioritize, and multi-task in an analytical and organized manner, • Ability to take an entrepreneurial approach to project management and commitment to team support, • Ability to learn quickly, transfer knowledge and provide valuable and actionable feedback, • Ability to manage multiple projects at the same time while maintaining high attention to detail, • Ability to operate at a high level in a dynamic, collaborative, goal-oriented and ever-changing production environment, • Must promote the company culture and mission to all employees, vendors, clients, and business partners, • PMP Certification or proven experience with project management methodologies (e.g. Agile, Scrum, Kanban, or Lean), • Experience working in a Project Management Office (PMO), • Experience leading and driving organizational change, • Superior interpersonal skills, ability to interface with a variety of personalities with professionalism, • Proven record of providing excellent internal and external customer service What we'll offer in return • Full-Time Position with a competitive salary, • Medical, Dental, and Vision benefits, • 401K with company match, • A multitude of perks including student loan payments, discounts on vehicles, benefits for your pets, and much more, • A great wellness program to keep you healthy and happy, both physically and mentally, • Access to opportunities to expand your skill set and share your knowledge with others across the organization, • A company culture of promotions from within, with a start-up atmosphere allowing for varied and rapid career development, • Must be able to read, write, speak and understand English, • Must be at least 18 years of age, • Must have a valid driver's license Legal stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description About Carvana "We believe CVNA is in the early stages of becoming the next U.S. retail category killer." – Stephens Investment Bank, Analyst Report, Sept. 2024 Building leading-edge technology has been at the core of Carvana's strategy since our founding, driving us to become the 3rd fastest company in history to organically reach the Fortune 500, following only Amazon and Google. Today, we remain founder-led and as ambitious as ever. In 2024, we not only emerged as the fastest-growing automotive retailer but also the most profitable, thanks to our deep vertical integration across retail, lending, vehicle transportation, wholesale auctions, and more. If you want to grow, not just as an Engineer, but as a leader and business-builder, Carvana is the place for you. Our technology teams build: • End-to-end e-commerce for both selling and buying cars, including everything you see on Carvana.com and in our mobile apps., • AI-driven customer support across chat, email, SMS, and voice, as well as a proprietary CRM platform to ensure the most efficient and highest-quality customer experience., • 360°ree; vehicle photography and interactive merchandising using cutting-edge computer vision and AI techniques., • The most sophisticated and self-service automotive lending platform in the world., • Systems and tools behind a nationwide logistics network that has delivered and picked up over 3 million cars via our fully owned and operated fleet of automotive haulers, efficiently managing distribution of our massive inventory to 85% of US driveways., • Enterprise-grade systems for operating the largest vehicle reconditioning facilities in the US, with workflow and automation to guide the work for everything mechanical, electrical, and cosmetic needed to bring each car to our high standards. THIS IS A 100% ON-SITE POSITION FROM OUR HQ IN TEMPE (Monday through Friday) About the team and position The Vehicle Data & Inventory team manages Carvana's massive vehicle data systems where our ultimate goal is to generate advanced insights as well as accurate and actionable intelligence on every vehicle available in the US car market. We develop APIs, pipelines, algorithms, architectures, and applications to support all stages of vehicle acquisition and merchandising. What you'll be doing • Design, develop, maintain, and deploy complex back-end solutions using Go and cloud services (Azure, AWS)., • Work with cloud-based systems, pipelines, and resources., • Perform data storage and persistence container querying using SQL, NoSQL, and caching technologies., • Develop loosely coupled solutions that are scalable, testable, modularized, and reusable., • Work in a team environment using Agile project approaches (Scrum, Kanban)., • Participate in all Scrum activities such as creating user stories, sprint planning, and sprint retrospectives., • Create and monitor dashboards and alerts to maintain the high availability of our services and pipelines., • Expertise with Go., • At least 5 years of software development, with consistently advancing skills and responsibilities., • Proven track record and passion for learning new programming languages and software frameworks., • Experience in using at least one cloud service (AWS, Azure, or GCP)., • Experience in working with both SQL and NoSQL storage backends., • Experience in automated testing best strategies and principles., • Experience in debugging and troubleshooting web services, APIs, libraries, and cloud deployments., • Experience with Node, TypeScript, and C#., • Technical leadership experience including a demonstrated proficiency in working closely with product management partners and diverse stakeholders to incept, design, develop, and ultimately deliver robust value-adding software solutions., • Experience mentoring and guiding the technical and career progression of junior engineers., • Experience designing system architectures for scale and high availability., • Experience in writing GraphQL interfaced services., • Experience in container-oriented architecture using Docker and Kubernetes., • Competitive salary and Carvana stock compensation., • Medical, Dental, and Vision benefits., • 401K with company match., • A multitude of perks including student loan payments, discounts on vehicles, benefits for your pets, and much more., • A great wellness program to keep you healthy and happy both physically and mentally., • Access to opportunities to expand your skillset and share your knowledge with others across the organization. To be able to do your job at Carvana, there are some basic requirements we want to share with you. Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Job Summary Define the future of aviation. Join Cirrus Aircraft’s team to build the greatest transformation in aviation since the jet engine. certifiable flight technologies to bring simple and safe personal flight to the masses. The Advanced Development Group is a small and nimble team that researches, designs, and tests concepts using rapid, unconstrained set-based design methodologies. The scope of our projects ranges from feature development to end-to-end systems and proof of concept aircraft, spearheading the next products. Look no further, the future of aviation is here. Join our innovative company today. Duties and Responsibilities/Essential Functions • Conduct on-aircraft system integration and validation testing., • Performs fluid dynamics, aircraft performance, and stability and control., • Research, implement, and evaluate software algorithms., • Must be able to independently design and execute bench, ground, and flight tests, and analyze and present results., • Design, execute, and present trade studies pertaining to data, software, and network architecture., • Contribute towards overall architecture and strategy for the advanced flight systems., • Collaboration with electrical and mechanical engineering to achieve fully integrated systems will be required. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Required Education and/or Experience: • Bachelors degree in Aerospace or Mechanical Engineering required., • 6-10 years’ experience in a related field, • Proficient in a professional environment developing MATLAB / Simulink control systems, • Proficient in fluid dynamics, aircraft performance, and stability and control., • Proficient with engineering drawings, CAD software, and engineering configuration management., • Strong communication skills: Be able to concisely document and explain workflows and design choices., • Maintain clear documentation and collaborate with cross-functional teams to align data engineering tasks with broader project goals., • Comfortable in driving results under uncertainty during the earlier stages of development, • Advanced degree in Aerospace or Electrical Engineering., • Experience generating system and simulation models., • Experience troubleshooting and implementing solutions for aerodynamic challenges such as drag, cooling, stability and control, and slow speed handling., • Experience with developmental flight testing., • Experience with physics-based 6DOF simulations., • Experience with configuration and layout of new aircraft., • Development/operations of hardware-in-the-loop simulators, conducting testing and troubleshooting of HW/SW interfaces To perform the job successfully, an individual should demonstrate the following competencies: • Directs Work: Provides direction, delegates, and removes obstacles to get work done., • Situational Adaptability: Adapts approach and demeanor in real time to match shifting demands of different situations., • Manages Complexity: Makes sense of complex, high quantity, and sometimes, contradictory information to effectively solve problems., • 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting., • Employer-Paid Coverages: Group term life, short- and long-term disability insurance., • Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options., • Free Health Tracking: With rewards for meeting health goals., • Generous PTO: 160 hours accrued within the first year., • Employee Referral Bonus: For referring talented candidates., • Career Development: Tuition reimbursement and professional growth opportunities., • Exclusive Discounts: Access to partner and marketplace discounts. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

Job Description DRA Global Limited is an international multi-disciplinary engineering, project delivery and operations management group, predominantly focused on the mining, minerals and metals industry. The Group has an extensive track record spanning almost four decades across a wide range of commodities. Our teams have deep expertise in the mining, minerals and metals processing industries, as well as related non-process infrastructure such as, water, and energy solutions. DRA covers all major mining centers with offices across Africa and the Middle East, North and South America, and the Asia-Pacific. Reporting to DRA America’s E&IC Engineering HOD, you will be responsible for engineering and discipline project design activities relating to concept, pre-feasibility, feasibility studies, EPCM and EPC projects. Reporting to our office in Phoenix, AZ (and with site visits to our Hudbay Project in Tucson, AZ). Main functions include (but not limited to): • Collaboration with Process and Mechanical Departments in development of the load list, • Update and maintain the electrical database for the project, • Cable Schedule, • Electrical Equipment List & Datasheets, • Medium and Low Voltage Single Line Diagrams, • Electrical Schematic and Wiring Diagrams, • Procurement of Electrical Equipment, • ETAP Modelling, • Technical Support, • Package Management, • Construction technical support & Commissioning, • Documentation and handover, • Engineering Mentorship Project Coordination • Ensure that the discipline designs are carried out in accordance with client standards and specifications, industry standards and the relevant legislation (quality of design)., • Provide design interface between disciplines., • Ensure (certified) design information received from vendors, contractors and consultants is accurate and interfaces with other designs., • Ensure the effective (peer) review and approval of discipline design., • Ensure continuous improvement, lessons learnt, value engineering, fit for purpose and latest technologies are implemented., • Carry the responsibility for the engineering discipline sign off., • Interface with internal and external design and drafting disciplines., • Provide discipline inputs for studies and proposals., • Onsite presence to provide engineering support to the contractor., • Onsite presence for commissioning discipline activities., • Manage the mark-up and back drafting of redline drawings., • Manage the discipline engineering handover and support to the client, • Mentor all ECI-engineering disciplines., • Takes ownership for personal development (within industry through registration and within company), • Support the Principal Engineers, ECI Managers and the HOD. Requirements: • 15+ years’ experience in a similar role within the multi-disciplinary EPCM environment., • Bachelor’s degree in electrical engineering., • Previous mining project experience., • Registered Engineer Employment type • Permanent Physical Requirements: While performing duties of this job, you may be required to stand, sit in a stationary position 50% of the time, alternate between sitting and standing, push/pull as necessary, reach overhead or below shoulder level, kneel, squat, or stoop. May be required on occasion to lift and carry items such as files, documents, or small packages, typically up to 10 -20 pounds. Frequent use of hands and fingers to operate a computer keyboard and other office equipment. Close visual acuity to perform activities such as reading, analyzing data, and working on a computer. DRA Global is committed to building a diverse and inclusive workplace where everyone feels valued and supported. We believe that diversity strengthens our ability to reach our goals, enhances our reputation, and helps us attract, engage, and retain great people. We welcome applications from individuals of all backgrounds, regardless of gender, age, disability, ethnicity, or any other characteristic. Our values — People, Safety, Trust, Integrity, Excellence, and Courage — reflect our ongoing commitment to equal opportunities and an inclusive culture.

Job Description About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. About Clayco Design and Engineering Clayco Design and Engineering (CDE) was created to diversify and grow Clayco's industrial business unit's capabilities with a focus on efficiently delivering robust design-build architectural and engineering solutions. The Clayco Design and Engineering team brings a tremendous amount of engineering expertise to the Clayco enterprise from a wide array of industrial segments such as food & beverage, consumer products, manufacturing, and life-science products. The Role We Want You For We are seeking a Senior Telecom Engineer – Mission Critical to lead the design, implementation, and integration of telecommunications systems for data centers and other mission-critical facilities. This role will focus on designing robust fiber optic and copper cabling systems, network infrastructure, wireless communications, and security systems that ensure high availability, scalability, and resilience. The ideal candidate will have extensive experience with structured cabling, data center networking, and critical communication systems. The Specifics of the Role • Design and develop structured cabling systems (fiber and copper) for mission-critical environments, ensuring scalability and redundancy., • Specify and implement network infrastructure including routers, switches, firewalls, and wireless systems to support high-bandwidth, low-latency operations., • Develop and oversee installation of telecom and network systems in compliance with industry standards such as TIA/EIA, BICSI, and NEC., • Integrate wireless communication systems, DAS (Distributed Antenna Systems), and VoIP solutions within mission-critical environments., • Collaborate with electrical, mechanical, and IT teams to ensure seamless integration of telecom systems with facility operations., • Work with vendors and contractors to oversee telecom system deployment, commissioning, and testing., • Develop redundancy strategies and disaster recovery plans for telecom infrastructure to maximize uptime and reliability., • Perform network performance analysis, cybersecurity assessments, and capacity planning for telecom systems., • Ensure compliance with industry regulations, security protocols, and data center best practices., • Bachelor's degree in Electrical Engineering, Telecommunications, Computer Engineering, or a related field., • 10+ years of experience in telecommunications engineering, with at least 5 years in mission-critical environments (data centers, industrial facilities, etc.)., • Strong knowledge of structured cabling standards (TIA-942, ANSI/TIA-568, BICSI), fiber optic networks, and low-voltage systems., • Experience with data center network design, VoIP, DAS, and wireless communication systems., • Proficiency in network architecture, VLANs, IP addressing, and cybersecurity best practices., • Familiarity with NFPA, NEC, IEEE, and industry standards related to telecom infrastructure., • Experience working in a design-build or integrated project delivery (IPD) environment is a plus., • Excellent problem-solving, leadership, and communication skills., • Our clients and projects are nationwide – Travel will be required., • No other builder can offer the collaborative design-build approach that Clayco does., • We work on creative, complex, award-winning, high-profile jobs., • 2024 Best Places to Work – Crain's Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal., • 2024 ENR Midwest – Midwest Contractor (#1)., • 2024 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5)., • 2024 ENR Top 100 Green Contractors – Green Contractor (Top 5). Benefits • Discretionary Annual Bonus: Subject to company and individual performance., • The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Job Description We are seeking a motivated and experienced Sheet Metal Foreman to join our team at a leading mechanical subcontracting company based in Phoenix, AZ. As a Foreman, you will work closely with project managers and the field operations team to lead a crew of sheet metal workers in the installation and fabrication of HVAC systems on commercial mechanical projects. This position is ideal for someone who is highly skilled in sheet metal work, has strong leadership abilities, and takes pride in delivering high-quality results on schedule and within budget. • Responsibilities, • Lead and supervise sheet metal crews on commercial mechanical projects., • Ensure all work meets project plans, specifications, safety standards, and quality requirements., • On projects where engineered documents aren't available, use industry practices to complete the work in a functional manner and in compliance with local code requirements., • Plan and assign daily tasks, monitor crew productivity, and ensure efficient use of labor and materials., • Coordinate with project managers, other trades, and subcontractors to maintain smooth workflow on-site., • Conduct regular inspections of work progress to ensure it meets project timelines and standards., • Provide hands-on leadership, troubleshooting, and problem-solving for on-site issues., • Assist with material handling, deliveries, and inventory to avoid project delays., • Enforce company and OSHA safety protocols, identifying and addressing hazards as they arise., • Track job progress and communicate updates to project management as required., • Mentor and train crew members to improve skills and ensure adherence to company procedures., • Qualifications, • 4+ years of experience in sheet metal work, with at least 1 year in a lead or foreman role., • Strong knowledge of HVAC systems, ductwork fabrication, and installation., • Ability to read and interpret blueprints, plans, and technical specifications., • Proficiency in using digital tools and computer experience (tablet use, Procore, Microsoft 365), • Proficiency in safety practices and regulations (OSHA compliance preferred)., • Excellent leadership, communication, and organizational skills., • Ability to work efficiently in a fast-paced environment and resolve on-site challenges. HACI Mechanical Contractors Inc. is an equal opportunity employer HACI Mechanical Contractors Inc. participates in E-Verify and requires appropriate hiring documentation HACI Mechanical Contractors Inc. maintains a drug-free environment and requires drug testing as a condition of employmentHACI is a premier Mechanical Contracting firm in the Valley of the Sun, serving the state of Arizona from our Phoenix office. We are proud to say our annual volume of work has grown to over $75 million in the past five years. Today, HACI constructs a variety of jobs in both public and private sectors, from shell buildings, hospitals, manufacturing, to tenant improvements. We have extensive experience in design-build and design-assist projects as well as plan-and-spec. We have an excellent working relationship with many of Arizona’s largest General Contractors, as well as with several mechanical engineering/design firms.\r\n\r\nHACI Mechanical Contractors Inc. is an equal opportunity employer\r\nHACI Mechanical Contractors Inc. participates in E-Verify and requires appropriate hiring documentation \r\nHACI Mechanical Contractors Inc. maintains a drug-free environment and requires drug testing as a condition of employment

Job DescriptionStress Analysis Engineer - Sr Advanced Mech Design Hybrid Role: 3 days onsite at AZ43 and 2 days remote Responsibilities: The Turbomachinery and Heat Exchanger Analysis and Design group within the Mechanical Systems and Components (MS&C) directorate is responsible for the design, development and analysis of Environmental Control System (ECS) turbomachinery and heat exchangers, as well as electric traction drive motors. The successful applicant will be responsible for stress, vibration, and heat transfer analyses. Responsibilities include providing technical expertise on a variety of projects and programs. You will use your expert knowledge of engineering discipline and standards, processes and tools to ensure compliance to customer and program requirements. Other responsibilities include communicating with Project engineering teams, conduction of design reviews, presentations to internal and external customers and contributing to department process improvement initiatives. Key Responsibilities • Design and analysis using complex finite element methods, • Provide technical oversight to global engineering teams across time zones, • Provide technical guidance to junior engineers, • Requirements validation, • Project and product compliance, • Risk management, • Process Development, • Root Cause and Corrective Action YOU MUST HAVE • Bachelor's Degree in Mechanical or Aerospace Engineering, • Minimum of 5 years of experience performing structural analysis on gas turbine engines and/or other structural, load bearing components and systems, • Proficiency in linear static, nonlinear/elasto-plastic, fatigue (HCF & LCF), modal, shock, harmonic, random vibration, & crack growth analyses, • Strong working knowledge of ANSYS finite element software & classical hand calculation methods WE VALUE • Ability to mentor others, • Significant experience with new product development in a highly regulated environment, • Ability to analyze and solve complex and challenging problems, • Effectively operate in a matrix organization, • Track record of successful contribution to products & projects, • Keen mindset to envision process improvements and execution of such initiatives, • Excellent written and oral communication skills Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.Company DescriptionNESCO Resource Company Overview Established in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers. Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.NESCO Resource Company Overview\r\nEstablished in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers.\r\n\r\nNesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job DescriptionSalary: Felix Construction Company is seeking an experienced Project Engineer that will assist Project Managers in the execution of water and wastewater treatment projects throughout the Phoenix metro area ($250k $20M). The Individual must be self-motivated and possess strong communication/interpersonal skills. WHAT YOU'LL BE DOING: • Closely work with Project Managers, Superintendents, field personnel and others involved in projects., • Learn and set up project files in accordance with company systems., • Organize vendor files, communicate clearly with vendors, draft and set up purchase orders, subcontracts, and material orders under the direction of the Project Manager., • Take responsibility for gathering, taking, and organizing project photographic documentation., • Maintain the project CPM Schedule, work with the Project Manager and Superintendent., • Learn payment application process and drafts progress billings for Project Manager review., • Attend project meetings and assume responsibility for some agenda items., • Track, review and follow up on submittals and RFIs to keep the project on track., • Assist Project Manager in creating work packages for field personnel, including coordinating with Superintendent, and creating AutoCAD drawings with details of the work to be performed., • Compile Operations and Maintenance (O&M) information from vendors., • Represent the company in a professional manner., • Construction management, civil engineering or mechanical engineering degree required., • 2+ years of water/wastewater construction industry experience highly desired., • Advanced Excel and Adobe Acrobat or Bluebeam skills highly desired., • Basic AutoCAD experience preferred., • Able to read plans and specifications for all the disciplines on a typical water/wastewater project., • Exposure to Alternative Procurement Delivery Method (APDM) experience highly desired (CSP, CMAR, D-B, JOC, etc.)., • Take initiative and handle ambiguity well., • Work collaboratively with others to meet shared objectives., • Have the legal right to work in the U.S. for any employer without sponsorship. WHY YOU SHOULD APPLY: You will have the opportunity to be part of a company that is making an impact on the construction industry and the community. It's a company you will be proud to work for. We offer a competitive compensation package, including a base salary, bonus opportunities, a company truck or vehicle allowance, comprehensive benefits with generous 401(k) matching, and paid time off. If you want to work in an environment that respects and values your contributions, wed love for you to apply!

Job DescriptionCompany Description Meade Engineering is a full-service design firm specializing in innovative and cost-effective engineering solutions for data centers, cloud providers, and large-scale construction projects. Our team of expert engineers, designers, and consultants is dedicated to delivering high-quality, reliable, and sustainable solutions that drive the industry forward. At Meade Engineering, we foster a collaborative and dynamic work environment where creativity, technical excellence, and professional growth are at the forefront. We take pride in our commitment to innovation, efficiency, and superior service-values that not only define our projects but also shape our workplace culture. If you're looking to be part of a company that values expertise, teamwork, and cutting-edge design, we'd love to hear from you. Job Description Meade Engineering is seeking an experienced Professional Plumbing Engineer to lead the design and development of plumbing systems for data centers, industrial facilities, and other large-scale commercial projects. This is a key technical leadership role involving design strategy, system engineering, project coordination, and production oversight. The ideal candidate will hold a PE license, possess strong Revit expertise, and have a deep understanding of plumbing codes, industry standards, and best practices. This position involves close collaboration with mechanical and electrical teams, architects, contractors, and clients to deliver innovative and cost-effective plumbing system solutions. Job Duties * Lead the design and engineering of plumbing system layouts, including domestic water, sanitary waste, storm drainage, and gas piping systems. * Perform and review plumbing design calculations to ensure compliance with applicable codes and standards. * Utilize Revit to produce and review plumbing construction documents, ensuring accuracy, quality, and coordination with other disciplines. * Oversee design schedules, deliverables, and project milestones to ensure timely and efficient execution. * Select plumbing equipment and fixtures based on project specifications, performance criteria, and energy and water efficiency goals. * Review and respond to submittals, RFIs, and change orders; assist with site visits, inspections, and field verification as required. * Coordinate with engineers, architects, contractors, and project managers to ensure seamless system integration and constructability. * Mentor and provide technical guidance to junior designers and engineering staff. * Support project meetings and client presentations, providing technical input and leadership. Minimum Qualifications * Bachelor's degree in Mechanical Engineering or a related field. * Minimum of 7 years of professional plumbing design experience for commercial or industrial projects. * Active Professional Engineer (PE) license required. * Proven experience designing plumbing systems for large-scale or mission-critical facilities. * Proficiency in Revit for plumbing system design and documentation. * Strong knowledge of plumbing codes, NFPA standards, industry best practices, and regulatory requirements. * Demonstrated ability to manage multiple projects, prioritize tasks, and meet deadlines. * Excellent communication and problem-solving skills, with the ability to work collaboratively across disciplines. Preferred Qualifications * Experience working on data centers, industrial, or mission-critical facilities. * Familiarity with MEP system coordination and integrated building systems. * ASPE certification or other relevant professional credentials. * Experience with sustainable plumbing design, including LEED and water efficiency systems. Benefits: All full-time employees receive a comprehensive benefit package that includes, but is not limited to, medical, dental, and vision insurance with 100% of medical premiums covered by the employer, short and long-term disability insurance, life insurance, a 401k plan, vacation time, paid holidays off, and yearly performance-based bonus eligibility. MEI is an Equal Employment Opportunity employer. We encourage qualified minority, female, veteran and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment, or any employee because of race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender, disability, age, or military status. Job Posted by ApplicantPro

Job Description Description: If you are looking to work for a dynamic and growing company performing engineering services for world leaders in the technology and industrial sectors, Corbin Consulting is the place for you. Challenge yourself and have fun working with a team of top performers who have earned a reputation for excellence among their clients and peers. Work for an employee-owned company that values its people and allows you to shape your future as you help the company continue its relentless growth. Advantages of working for Corbin Consulting Engineers: • Employees control their career advancement. You will have direct access to key project players, including design managers, disciplines designers, and officers., • Design building systems for leaders in the advanced technology, industrial sector and life sciences sectors., • Corbin serves a wide variety of clients with a myriad of unique projects and design challenges, providing a variety of working experiences. We are seeking a project manager for our Tempe office to scope projects, write fee proposals, manage a multi-discipline project team through each phase of project design and construction, perform quality control of documents, and provide outstanding customer support. You will work with a competent multi-discipline team of engineers and administrative staff with a wide range of experience levels. This is an exciting opportunity to get in on the ground floor of a new office serving industry leaders. Responsibilities: • Scoping new engineering projects and writing fee proposals for our valued customers. Clients may include architects, contractors or owners., • Provide regular project updates and coordination with our internal management team., • Coordinate quality control reviews of multi-discipline design documents performed by your colleagues, as well as conducting periodic reviews directly., • Managing an engineering team to meet quality, cost and schedule targets. Includes assembling project tasks lists and schedule, leading regular discussions with team members to ensure project is on track, and identifying roadblocks and potential solutions. Engineering disciplines being managed could include architectural, structural, mechanical, process, electrical, and instrumentation & controls., • Leading project contractual and design discussions with clients regarding such topics as engineering issues and solutions, information needs, budget, schedule and staffing., • Attending client meetings as a representative for the firm regarding general subjects that arise as part of supporting projects. Expectations: This is a mid- to senior-level position for applicants with client and project management experience. We are looking for candidates with the following: • Understanding of general engineering fundamentals and construction., • Good communicator and team player. Must be able to relate well both to internal staff and to customers., • Solid technical writing skills, with experience developing and documenting processes for an engineering team., • Solid relationship builder, capable of comprehending and listening to customer feedback, with consistent follow-through on commitments., • Ability to lead a team., • Highly organized, detail-oriented and thorough with experience in quality control review of documents., • Dedication and commitment; results oriented., • Ability to learn quickly and grasp new concepts, especially as they relate to engineering and construction. Education and Experience: • 7+ years of experience performing project and client management for an engineering firm., • BSEE or equivalent degree from an accredited university, preferably in architecture or engineering., • Proficiency with Bluebeam, MS Word, Excel, Teams, PowerPoint and Outlook., • EIT or PE license is a plus but not required. Please identify any relevant skills you might have, such project management certification, or software skills such as MS Project, Quickbase, AutoCAD, Revit or Navisworks. Please provide any past work or volunteer experience in your response, including those that may be non-engineering related. Wages/Benefits: We offer a very competitive compensation package within the engineering consulting industry. • A compensation package based on experience and abilities., • Flexible work hours., • Corporate-sponsored medical and dental insurance plans., • An Individual Retirement Account (IRA) program with company matching., • Three weeks of Personal Time Off (PTO) and eight paid holidays per year., • Up to $3000/year in yearly tuition reimbursement for coursework relevant to your position.

Job DescriptionDescription: Methods Machine Tools, Inc. supplies high-quality, high-precision machine tools and automation solutions, and designs integrated custom machining processes and systems. Headquartered in Sudbury, Mass., and in operation since 1958, Methods provides an end-to-end portfolio of best-in-class products, engineering, service, parts, training, and integration. Methods has more than 300 employees, seven technology centers, one high precision machining center, and has installed in excess of 45,000 machines throughout North America. The following position is available at our office in Tempe, AZ: Applications Engineer Position Overview: This position is responsible for supporting the application, setup, programming, and operation of CNC machines. The ideal candidate will have expertise in CNC programming, machining processes, and the ability to support customers with technical issues. Position requires occasional overnight travel. Key Responsibilities: • Technical Support: Provide technical application support to customers, both remotely and on-site, ensuring CNC machines are running efficiently., • Machine Setup & Operation: Assist in the initial setup and configuration of CNC machines, ensuring optimal machine performance., • Programming & Troubleshooting: Develop, modify, and optimize CNC programs. Troubleshoot and resolve any issues related to machine operations, including software and hardware challenges., • Customer Training: Train customers on CNC machine operations, programming techniques, and machine maintenance to maximize productivity and ensure safety., • Documentation: Create and maintain detailed documentation for programming, procedures, and troubleshooting steps., • Product Testing: Conduct tests and demonstrations of new CNC systems, providing feedback to engineering and product development teams., • Collaboration: Work closely with sales teams to tailor CNC solutions to customer needs., • Education: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or related field. Relevant certifications and training in CNC technologies are a plus., • Experience: Minimum of 10 years of hands-on experience with CNC machine operation, programming, and applications in manufacturing or production environments., • Skills:, • Proficiency with CNC programming languages (e.g., G-code, M-code, Fanuc), • Strong knowledge of CNC machine types (e.g., mills, lathes, multi-axis machines)., • Understanding of machining processes, cutting tools, and materials., • Experience in troubleshooting and resolving technical issues with CNC equipment., • Excellent problem-solving and analytical skills. Strong communication skills for customer support and internal collaboration., • Ability to train and mentor staff or customers effectively., • Experience with CAD/CAM software, • Familiarity with automation and robotics in CNC manufacturing environments., • This position may require travel to customer sites for installations, training, and support. · Medical, Dental, Vision, Paid time off, Education Assistance, 401(k) Plan, and great opportunity for career growth. Methods Machine is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Requirements:

Job Description The Manufacturing Program Manager plays a critical role in leading medical injection molding and assembly programs from concept through to commercial launch. This role combines strategic oversight with hands-on leadership, ensuring that all manufacturing programs are delivered on time, within scope and budget, and in full compliance with regulatory, quality, and customer expectations. The ideal candidate brings deep experience in regulated manufacturing environments, excels at cross-functional leadership, and is passionate about continuous improvement, technical excellence, and delivering innovative solutions to customers in the medical device space. In addition to new program development, this role will also support the transition and ongoing oversight of current programs, including relocation of manufacturing programs between sites. This includes planning and executing knowledge transfer, tooling moves, and validation activities to ensure business continuity and customer satisfaction. Key Responsibilities Program Management & Execution • Manage the full lifecycle of manufacturing programs-from initial scoping and planning to execution, validation, and launch., • Oversee site-to-site program transfers, ensuring smooth relocation of tooling, equipment, processes, and documentation with minimal disruption to production or quality., • Develop and maintain comprehensive program plans, including schedules, resource allocation, risk management, and budgets., • Ensure alignment between program objectives, customer requirements, and strategic business goals., • Use Smartsheet or similar tools for real-time scheduling, task tracking, and program transparency., • Lead cross-disciplinary teams including Engineering, Production, Quality, Tooling, and Supply Chain., • Facilitate communication and coordination across departments, vendors, and customers to ensure unified progress., • Serve as the primary point of contact for customer communications throughout the program lifecycle., • Establish and maintain strong client relationships, ensuring satisfaction through responsiveness, transparency, and results., • Champion continuous improvement initiatives to optimize manufacturing efficiency, reduce waste, and improve process capability., • Analyze KPIs and program performance metrics to identify trends, issues, and improvement opportunities., • Ensure all programs adhere to relevant medical device regulations and standards, including FDA (21 CFR Part 820), ISO 13485, and customer-specific quality requirements., • Partner with Quality and Regulatory teams to integrate validation, risk analysis (e.g., DFMEA/PFMEA), and document control into program execution., • Leverage knowledge of injection molding, plastics processing, and medical assembly methods to inform decisions and guide technical discussions., • Use ERP systems (IQMS, Epicor, SAGE 100, or equivalent) to manage materials, resources, production schedules, and cost tracking., • Develop and manage detailed budgets, ensuring effective use of personnel, equipment, and materials., • Monitor financial performance and ensure adherence to project cost constraints., • Provide accurate and timely reporting on program status, risks, corrective actions, and financial performance., • Bachelor's degree in Engineering, Manufacturing, Industrial, Mechanical, or a related technical field., • 5+ years of program or project management experience in a regulated manufacturing environment, ideally within medical devices or injection molding., • Strong technical understanding of manufacturing operations, plastics processing, quality systems, and validation practices., • Proficiency in project management tools (e.g., Smartsheet, Microsoft Project) and ERP systems (IQMS, SAGE 100, Epicor)., • PMP or equivalent project management certification., • Certification or training in Lean Manufacturing, Six Sigma, or continuous improvement methodologies., • Advanced knowledge of ISO 13485, FDA QSR, and other relevant medical manufacturing regulations., • Support of Current Programs: Responsible for managing and optimizing in-process and legacy programs, including timeline adjustments, cost improvements, and process enhancements., • Program Relocation: Lead and coordinate the transfer of manufacturing programs from one facility to another, ensuring full validation, equipment readiness, and documentation continuity., • Travel: Occasional travel (up to 20-30%) may be required to visit customer sites, vendors, or internal manufacturing locations to support launches, relocations, validations, or customer reviews.

Job Description Electrical Test Engineer Position Summary: This role entails conducting electrical assessments on a Client battery charging device conforming to Aerospace specifications, working closely with a Senior Electrical Engineer. Moreover, it necessitates aiding in the formulation of the Automated Test Procedure (ATP) essential for the production evaluation of the aforementioned battery charger product. Responsibilities: • Electrical Engineer to own and drive the Electrical qualification testing for our aerospace program., • Compile all test data into a report, • Implementing an electrical testing strategy to support an Aerospace validation initiative., • Orchestrating the scheduling and evaluation of products at external testing facilities, overseeing test equipment transportation, supervising tests, and scrutinizing test findings., • Engaging in the design phase of electronic or mechanical prototypes for testing apparatus, procuring necessary components and tools, and maintaining comprehensive records regarding applications and maintenance.Requirements:, • Possession of a Bachelor's degree in electrical engineering or a closely related discipline., • Minimum of 3 years of experience in a testing environment., • Proven track record in liaising with external labs for qualification testing support., • Preferable background in Military/Aerospace operations., • Proficient in computer operations and adept at data analysis. Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Company DescriptionNESCO Resource Company Overview Established in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers. Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.NESCO Resource Company Overview\r\nEstablished in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers.\r\n\r\nNesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job DescriptionThis Jobot Job is hosted by: Bryna Rabin Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $135,000 - $150,000 per year A bit about us: Based in Tempe, AZ we are a $1B+ nationwide construction company specializing in Civil and Industrial Construction If you are an experienced Estimator then please read on… Why join us? We Value our Employees! Package includes the following and MORE! Medical, dental, vision, disability, life, and retirement savings, bonus, etc... Job Details Summary: The Senior Estimator operates with minimal oversight on preconstruction teams, frequently serving as the principal point of contact with the design team and the owner. Senior estimators are capable of leading all types of project delivery methods and have demonstrated competence in basic and advanced estimating functions. Senior Estimators are knowledgeable regarding cost for all work elements including mechanical and electrical systems and prepare conceptual estimates, general conditions, and logistics plans that require minimal review by senior staff. Sr. Estimators will also provide training and mentoring to estimators on staff. Key Responsibilities 1. Capably performs basic estimating functions including quantity takeoff, pricing development for all trade work (including mechanical and electrical scopes), and abstracting (including the development and analysis of trade bids)., 2. Develops conceptual estimates for review by senior personnel., 3. For projects where third party consultants are involved, provide justification and reconciliation of Sundt estimates., 4. Leads the preparation of estimating documents/deliverables with minimal oversight from Senior personnel, to include budget uploads, purchasing plans, subcontracts, purchase orders, General Conditions and project logistics., 5. Performs advanced estimating tasks to include serving as the prime point of contact for hard bid pursuits, coordinating constructability reviews, and applying appropriate indirect costs including insurance, taxes, and fees., 6. Provide coordination with operations to ensure a reasonable plan (schedule, logistics, staffing) has been developed., 7. Provides feedback to design team regarding cost and constructability. Minimum Job Requirements 1. Four?year engineering degree or equivalent combinations of technical training and/or related experience., 2. Ideal candidates will have project experience in one or more key market sectors identified by the business unit., 3. Preferred candidates will have obtained their LEED accreditation and DBIA certification, or express willingness to obtain., 4. Proficient use of all Microsoft Office Suite programs., 5. Successful history executing projects as the prime point of contact with minimal oversight for project teams., 6. Ten or more years of experience in an estimating role. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description Salary Range: $80,000 to $85,000 per year Benefit Eligible: Yes, includes health insurance (medical, dental, vision) along with paid time off and a 401(k) with company match Location: Onsite in Mesa, AZ Classification: Exempt, Regular Full-time Reports to: Maintenance Manager The Company Paleovalley is a modern health-conscious snack and supplement company. We are committed to making delicious, high-quality products that do not cut corners. We source from certified organic farmers using regenerative agricultural practices. Our goal is to support our customers with better alternatives to the health-damaging junk foods and synthetic supplements lining the grocery store shelves. The Hiring Process Our hiring team will review your experience to determine if it matches our needs. We review as many applications as we can using human review, not resume parsers or AI. We have implemented a “No Ghosting” policy where we strive to provide a response to as many candidates as we can, especially for those that take the time to interview with us. Due to high volume, we can’t always provide feedback on applications. Emails from us will come from either paleovalley.com or applytojob.com, so please whitelist those domains or check your spam folder to make sure you don’t miss communications. The Opportunity The Maintenance Supervisor is responsible for leading, coordinating, and overseeing the daily activities of the maintenance team to ensure the safe and efficient operation of all plant equipment. This role involves planning and scheduling maintenance work, managing a team of technicians, and ensuring compliance with all safety and quality standards. The ideal candidate will have strong leadership skills, a deep technical background in both mechanical and electrical systems, and a proven track record of improving equipment reliability in a food manufacturing environment. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Team Leadership and Management: • Supervise, train, and mentor a team of maintenance technicians (Tech 1, 2, and 3)., • Conduct performance reviews, provide constructive feedback, and address employee relations issues., • Develop and manage the preventive and predictive maintenance program to minimize unplanned downtime., • Prioritize and schedule work orders based on urgency and impact on production., • Oversee the maintenance and repair of all critical equipment, including steam cooking kettles, control panels, VFDs, pneumatics, and conveyors., • Enforce all safety protocols, including Lockout/Tagout (LOTO), and ensure the team works in a safe and clean environment., • Lead safety meetings and conduct regular audits of the maintenance area., • Serve as the primary technical expert for complex equipment issues and breakdowns., • Lead root cause analysis for recurring equipment failures and implement corrective actions., • Manage the parts inventory, including ordering, tracking, and optimizing stock levels., • Identify opportunities for process and equipment improvements to enhance reliability, efficiency, and safety. This position is responsible for supervising a team of maintenance technicians (Tech 1, 2, and 3). Competencies • Exceptional leadership, communication, and interpersonal skills., • Strong problem-solving and decision-making abilities., • Excellent organizational and time management skills., • A proactive and results-oriented mindset, • Comprehensive knowledge of electrical, mechanical, and pneumatic systems., • Expertise in troubleshooting and programming PLCs (e.g., Allen-Bradley)., • Proficiency in reading and interpreting schematics, P&ID diagrams, and technical manuals., • High school diploma or equivalent required., • Minimum of 5-7 years of experience in an industrial maintenance role is required., • At least 2-3 years of experience in a supervisory or team lead position is required., • A Bachelor's degree from a regionally accredited institution in Engineering, or a related technical field, is highly preferred, but we will also consider those with significant, relevant on-the-job experience. The employee is primarily working in a warehouse environment, between 0 and 45 degrees Fahrenheit. The noise level in the warehouse can be loud. The position regularly works near moving mechanical parts and in outside conditions that include inclement weather, heat and humidity, and exposure to dust. Work may be performed under hazardous conditions such as operating heavy equipment within the Warehouse. Required to wear all issued safety gear at all times. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The position requires lifting heavy objects, walking, sitting and standing for long periods of time. Performs strenuous physical labor under adverse field conditions such as cold. The employee lifts, pushes, pulls or carries objects; uses abdominal and lower back muscles to provide support over time without fatigue; and effectively bends, crouches, twists, sprints or throws objects. The employee must climb and maintain body balance. Frequently lifts items up to 40 pounds. While performing the duties of this job, the employee is regularly required to talk or hear. The position requires good manual dexterity (hand, hand with arm, two hands) and multi-limb coordination. The position requires the ability to quickly move arms and legs. The employee must have excellent stamina. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position that may require working different shifts, weekends, and holidays as needed to support 24/7 production operations. The role involves working in a food manufacturing facility, where adherence to strict safety and sanitation protocols is mandatory. This position does not require travel. Work Authorization/Security Clearance (if applicable) The employee must be authorized to work in the United States for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. #LI-onsite EEO Statement: Paleovalley and Wild Pastures are equal opportunity employers. Employment and processes, including decisions to hire, promote, discipline, or discharge, are based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. E-Verify: Paleovalley and Wild Pastures participate in E-Verify, the federal program for electronic verification of employment eligibility. Powered by JazzHR 42dkkIbFuZ

Job DescriptionDescription: Company Overview: Masterbilt INC is a renowned leader in precision manufacturing, boasting a legacy of innovation and excellence. Since our inception, we've been committed to pushing the boundaries of CNC machining, delivering top-tier solutions to our esteemed clientele across diverse industries. Our state-of-the-art facilities and dedicated team ensure that every project meets the highest standards of quality and precision. Overall Purpose: The CNC Lathe Machine Operator plays a crucial role in our operations by producing machined parts through setting up, and operating a CNC lathe machine. The operator is responsible for maintaining safety and quality standards, documenting procedures, and ensuring equipment and supplies are properly maintained to support the achievement of Masterbilt’s business goals and objectives. Requirements: Essential Job Functions & Expected Outcomes: • Plan Machining Processes: Study work orders, part blueprints, materials, specifications, engineering plans, reference planes, locations of surfaces, and machining parameters; interpret geometric dimensions and tolerances (GD&T)., • Set Up Lathes: Install and adjust chucks, tools, attachments, collets, and indicating vices., • Maintain Specifications: Observe operations, take measurements, detect malfunctions, troubleshoot processes, adjust and reprogram controls, sharpen and replace worn tools, and adhere to quality assurance procedures and processes., • Ensure Safe Operations: Adhere to safety procedures and regulations., • Maintain Equipment: Complete preventive maintenance requirements; follow manufacturer's instructions; troubleshoot malfunctions; call for repairs., • Document Actions: Complete production and quality logs., • Update Job Knowledge: Participate in educational opportunities; read technical publications., • Standard office equipment such as computers, phones, electronic devices, photocopiers, filing systems/cabinets, and fax machines., • Regular exposure to office and manufacturing environments with moderate noise levels., • Occasional requirement to wear suitable Personal Protective Equipment (PPE) while visiting manufacturing departments., • Education: High school diploma or equivalent., • Experience: Minimum 2 years in manufacturing and CNC machining a MUST, • Functional Skills:, • Strong attention to detail, • Fundamental knowledge of CNC machining/manufacturing machining principles, • Familiarity and skill with interpreting technical drawings and blueprints, • Strong mechanical aptitude, • Fundamental knowledge of lean manufacturing principles and techniques, • Ability to work independently and closely follow directions, • Technology Aptitude/Skills: Proficient with CNC Lathe machines., • Language Skills: Excellent verbal and written communication; ability to create/write work instructions and train others., • Leadership/Behaviors: Solid collaboration skills, openness to new ideas, positive attitude, flexibility, and adaptability., • Ability to stand for up to 6-8 hours in one session., • Ability to sit at a desk for 2+ hours per day., • Ability to operate the keyboard and view computer screen as needed throughout the day., • Ability to write ideas/information in a logical flow as needed throughout the day., • Ability to read and respond on an ongoing basis daily due to the nature of the work, throughout the day., • Ability to communicate with others via phone, in-person, and computer on an ongoing basis., • Ability to listen to customers, employees, and peers, problem-solve, and respond accordingly., • Ability to read, write, and speak English fluently., • Ability to sit, stand, walk, bend, stoop, kneel, crouch, reach, squat, twist, push, pull, and carry items frequently.