Medical assembly jobs in Denver, Colorado - Page 3Create job alerts

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of the Lunar Permanence business unit, which develops Blue Origin's Blue Moon landers and related products. To further Blue Origin's mission of millions of people living and working in space for the benefit of Earth, we are building sustainable infrastructure for our transport of crew and cargo from Earth to the lunar surface. Join a hard working team of engineers to develop advanced Motor Control systems, directly impacting the future of human spaceflight. Contribute to the thoughtful design and integration phase the team is supporting for analysis and avionics/control hardware design, pioneering spacecraft systems. Blue Origin values collaboration, trust, and a culture of safety, and a bias for action recognizing each team member's input. Responsibilities include but are not limited to: • Deliver space-rated avionics sub-systems- including requirements development, design, testing, system integration, verification planning, and execution., • Develop and manage, high and low voltage avionics designs that integrate within a motor control scheme., • Support design risk analyses, failure modes effects and criticality analyses (FMECA), design for test/manufacture/cost (DFx), and root-cause analysis of test discrepancies., • Effectively communicate development status, risks, and challenges to management. Minimum Qualifications: • Bachelor of Science in Electrical Engineering, or related discipline, • 5+ years of experience in electrical/avionics design, • Understanding of power electronics hardware development, such as developing high-voltage switching, and high power regulation (SMPS), • Knowledge of signal integrity, power, grounding, and general board layout principles, • Experience with mixed-signal circuit design, including analysis, simulation, test, troubleshooting, and part selection, • Familiarity with many of the following parts and their usage: ADCs, DACs, op amps, power supplies (linear, LDO, DC/DC), and MOSFETs, • Desire to work hands-on, both independently and as part of a team, throughout the development and production phases of the electronic assembly product lifecycle Preferred Qualifications: • Master's degree in Electrical Engineering, or equivalent field, • 7+ years of experience in design, development, test, and operation of vehicle Avionics systems, • Experience with brushless DC (BLDC) motors and controllers, • Additional experience with various motor controls, power conversion topologies, and control systems, • Knowledge of radiation effects on electronics and how to apply this to designs targeting space applications, • Experience with launch vehicle Avionics systems hardware development, integration, and test, • Electrical Design and Analysis tools: LTSpice, PSpice, SIMetrix/SIMPLIS, Simscape Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Stock Options for all regular employees (working at least 20 hours/week) * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of the Lunar Permanence business unit, which develops Blue Origin's Blue Moon landers and related products. To further Blue Origin's mission of millions of people living and working in space for the benefit of Earth, we are building sustainable infrastructure for our transport of crew and cargo from Earth to the lunar surface. We are a team of collaborators, doers, and problem- solvers who are relentlessly committed to a culture of safety. This position will directly impact the history of space exploration and will require your commitment and detailed attention towards safe and repeatable space flight. Join us in lowering the cost of access to space and enabling Blue Origin's vision of millions of people living and working in space to benefit Earth. As part of a hardworking team, the Electrical Engineering Lead for the Lunar Cryocooler System will be responsible for the Avionics and Motor Control system for the Zero Boil Off (ZBO) Cryocooler, which enables Blue Origin to make hydrogen a storable propellant and is a key technology for our permanent lunar presence. This role is responsible for planning, setting standards within the technical team, and guiding a team of high performing avionics engineers. They will work to ensure the avionics/control electronics for the Zero Boil Off Cryocooler are developed within technical, cost and schedule constraints. This includes flight software, avionics hardware, hardware-in-loop (HIL), and development of controllers for very high-speed gas bearing motors. We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight. Passion for our mission and vision is required! Responsibilities: • Work with your team to deliver the space-rated avionics sub-system to the cryocooler, which includes requirements development, design, testing and system integration, verification planning and execution, and lab leadership, • Develop and own, with your team, the high and low voltage avionics designs that interact with the full cryocooler system, • Support design risk analyses, failure modes effects and criticality analyses (FMECA), design for test/manufacture/cost (DFx), and root-cause analysis of test discrepancies, • Participate in program level technology development, mission assurance and safety initiatives, and avionics development process improvements, • Effectively communicate development status, risks, and challenges to management Qualifications: • Bachelor of Science in Electrical Engineering, or related disciplines discipline, • 7+ years of electrical/avionics design, including previous team leadership experience, • Experience with analog, digital or mixed-signal circuit design, including analysis, simulation, test, troubleshooting, and part selection, • A breadth of understanding in power electronics hardware development, such as developing high voltage switching, high voltage and power regulation, • Knowledge of signal integrity, power, grounding, and general board layout principles, • Familiarity with many of the following parts and their usage: ADCs, DACs, op amps, power supplies (linear, LDO, DC/DC), processors, and MOSFETs, • Knowledge of common communication methods, such as RS232, RS422, I2C, SPI, LVDS, Ethernet, or CAN, • Desire to work hands-on, both independently and as part of a team, throughout the development and production phases of the electronic assembly product lifecycle Desired: • Master of Science in Electrical Engineering, or related disciplines, • 10+ years of experience in design, development, test, and operation of vehicle Avionics systems, • Experience with brushless DC (BLDC) motors and controllers, • Additional experience with various motor controls, power conversion topologies, and control systems, • Knowledge of radiation effects on electronics and how to apply this to designs targeting space applications, • Experience with launch vehicle Avionics systems hardware development, integration, and test, • Electrical Design and Analysis tools: LTSpice, PSpice, SIMetrix/SIMPLIS, Simscape Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Stock Options for all regular employees (working at least 20 hours/week) * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of the Lunar Permanence business unit, which develops Blue Origin's Blue Moon landers and related products. To further Blue Origin's mission of millions of people living and working in space for the benefit of Earth, we are building sustainable infrastructure for our transport of crew and cargo from Earth to the lunar surface. Responsibilities: • Participate in the entire design cycle of structural and mechanical subsystems, including conceptual and detailed design, trade studies, structural analysis, development testing, and qualification., • Generate 3-D models, component drawings, assembly drawings, and interface control documents., • Document assembly and testing of development and flight hardware., • Participate in subsystem-level testing including planning, execution, data reduction, and analysis., • Develop component specifications and manage suppliers., • Provide manufacturing and production support., • Participate in the development and purchase of new equipment and tooling., • Work with multi-functional teams that are responsible for selecting materials, manufacturing processes, and suppliers to produce world-class aerospace hardware. Qualifications: • Minimum of a B.S. Degree in engineering, • 2+ years of experience in Design Engineering, • Familiaritywith aircraft, spacecraft, or launch vehicle structures., • Material selection, compatibility, and manufacturing techniques., • Strong mechanical design and integration skills using 3D CAD software., • Familiar with GD&T analysis (ASME Y14.5). Desired: • Ability to work independently driving engineering from conceptual to released engineering and flight hardware, • Experience with Creo (Pro/E) Wildfire 5 or greater, Windchill 10., • Expertise with analysis codes: Nastran, ANSYS,Optistruct, LS/Dyna, Abaqus., • Awareness of metallic and composite design and analysis considerations., • Experience with rapid development techniques for hardware., • Knowledge of systems engineering practices, manufacturing fabrication and assembly processes, and quality control., • Experience with Optimization and DOE methods as applied to design, analysis, and testing., • Experienced with the fabrication of composite primary structures for aerospace., • Experience working in a multi-functional team responsible for selecting materials, manufacturing processes, and developing the design to produce world-class engineered products., • Demonstrated experience developing manufacturing processes for transition to production. Compensation Range for: CA applicants is $99,201.00 - $138,880.35 CO applicants is $90,934.00 - $127,307.25 WA applicants is $99,201.00 - $138,880.35 Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Stock Options for all regular employees (working at least 20 hours/week) * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $110,000 - $135,000 per year A bit about us: We are a growing, quality-driven manufacturer specializing in medical device and combination product production. Our team is committed to delivering safe, reliable, and compliant products that make a meaningful impact on patient care. With a strong foundation in regulated manufacturing, we focus on continuous improvement, operational excellence, and innovation across our processes. We pride ourselves on maintaining a collaborative, hands-on environment where employees are empowered to contribute, develop their skills, and take ownership of their work. Why join us? Clean, climate-controlled environment with a strong emphasis on quality and safety Stable schedule that supports work-life balance Competitive compensation and comprehensive benefits package Health, dental, and vision insurance 401(k) with company contribution Paid holidays and generous PTO Tuition reimbursement and ongoing training opportunities Clear paths for career growth and advancement Supportive leadership and a team-oriented culture Job Details We are seeking a highly skilled Quality Engineer with experience in medical device, combination products, or Assembly, Labeling, and Packaging (ALP) manufacturing. This role is critical to ensuring product quality, regulatory compliance, and operational excellence across the full manufacturing lifecycle. You will play a key role in sustaining engineering efforts, continuous improvement initiatives, and the execution of quality systems, partnering closely with cross-functional teams across operations, engineering, and regulatory. Responsibilities Provide Quality Engineering support for medical device operations, combination products, and ALP manufacturing lines Ensure compliance with FDA regulations, including 21 CFR Part 820, and applicable ISO standards such as ISO 13485 and ISO 14971 Support and lead risk management activities, including FMEA and product risk assessments Oversee processes related to sterile barrier packaging, labeling control systems, and drug-device interface considerations Lead or support investigations, root cause analysis, CAPA, and nonconformance resolution Collaborate with cross-functional teams to drive process improvements, validation activities, and product lifecycle support Assist with internal audits, external audits, and regulatory inspections Drive continuous improvement initiatives focused on quality, efficiency, and compliance Qualifications 5+ years of experience in medical device quality engineering, combination products, or ALP manufacturing Experience with assembly operations, packaging, and labeling processes in a regulated environment Knowledge of sterile barrier packaging, labeling control systems, or drug-device interface requirements Strong understanding of FDA QSR, ISO 13485, ISO 14971, and applicable regulatory frameworks Experience with risk management tools such as FMEA Strong analytical, problem-solving, and communication skills Bachelor’s degree in Engineering or a related field Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Wanco Inc. is seeking a Quality Inspection Technician in our Arvada, CO production facility. Summary: Quality Inspectors are responsible for inspecting and testing products and ensuring that products meet Wanco Inc’s quality standards before they are shipped or used in production. Essential Functions: · Approve in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments to line leads. · Maintain productive relationships with line leads by communicating inspection results and driving correction upstream to the root cause. · Approve incoming materials by confirming specifications; conducting visual and measurement tests; rejecting and returning non-conforming materials. · Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into a quality database. · Keep measurement equipment operating by following operating instructions; calling for repairs. · Maintain a safe and healthy work environment by complying with standards and procedures. · Assist in other quality functions as directed. Qualifications/ Skills: · High School or GED Degree · Experience with mechanical and electrical assembly (certification or Associate’s degree preferred, but not required) · Proficiency in reading blueprint drawings preferred · High school and or college-level math · Data entry, typing, Microsoft suite experience including spreadsheets · Analytical and troubleshooting skills preferred Physical Requirements: · Mobility to work in a factory and warehouse setting including the use of standard office equipment, including a computer · Some travel may be required Reporting: This position reports to the Quality Lead and has no direct reports. Salary Range: $22-$26 per hour DOE. Benefits: Insurance (Medical, Dental, Life, 401k). Paid time off and holidays. Eligible to participate in Wanco’s standard benefits package. Wanco Inc. Address: 5870 Tennyson Street, Arvada, CO 80003 | 303-427-5700 | wanco.com Company DescriptionWanco is the industryʼs leading manufacturer of highway safety and traffic control products. Innovation and new product development have made us what we are, and will continue to carry our reputation forward, well into the future. Wanco provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.Wanco is the industryʼs leading manufacturer of highway safety and traffic control products. Innovation and new product development have made us what we are, and will continue to carry our reputation forward, well into the future.\r\n\r\nWanco provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDescription: At Mikron we are committed to delivering the best assembly systems and all needed services throughout your product’s entire life cycle. With our extensive engineering know-how, complex process expertise, scalable platforms and lifelong support we are driving lasting success for your business. With more than 4,000 assembly and test systems in use worldwide, our team of over 800 qualified employees have unique process expertise and the rigor for complex project management in a wide range of industries. Mikron experts will work closely with you to design an automated assembly system that meets your unique, industry-specific processes, whether for high-volume, medium-volume or lab-scale production. Mikron's standard systems are scalable and customizable to meet your current needs and adapt to future production requirements, without the need for costly and extensive future upgrades. Our automation solutions wouldn’t be complete without our extensive value-added customer service and support programs. Whether you require support with the design of your device to ensure its manufacturability, advice on complex process validation, production data analysis, maintenance program support or specific training - Mikron’s Customer Care supports you throughout the life of your production asset. With Mikron, you benefit from an agile organization with decades of complex process expertise, scalable automated assembly solutions, highly comprehensive customer services and global coverage. The CUS Applications Engineer prepares detailed proposals for complex upgrades or retrofits on existing automation equipment and supports the Key Account Manager(s) to present the concepts to customers. The Applications Engineer supports the company goals, values and philosophy by exhibiting the following behaviors: excellence, quality service, positive behavior, commitment and accountability. As a member of the Mikron team, performance includes demonstration of the following accountabilities: customer service, communication, teamwork, and job knowledge. This position supports the overall Customer Service Sales, Applications, and Engineering functions of the business. Requirements: Essential Duties & Responsibilities • Work with the Key Account Managers and CUS Program Supervisor on all aspects of the process., • Review the customer requests, specifications, and products to develop an upgrade or retrofit concept based on our standard assembly platforms. Provide our customers with product design support to improve the assembly process., • Determine customer requirements and sales strategy with KAMs and CSCOs., • Develop:, • Upgraded or retrofit assembly concepts, • AutoCAD 2D layouts and Inventor 3D models, • Sub-systems specifications and costings through direct contact with suppliers, • Detailed project cost estimates as the basis for the sales price, • Technical PowerPoint presentations, • Consultation and collaboration with our internal engineering leads to address specific design concerns or issues to ensure correct pricing., • Communicate with the customer during the proposal phase., • Work with other CSAE or CSCO as necessary., • Write quotations and present your solution to our customers as part of the Sales team., • Make sales calls with the Key Account Managers to provide automation technical support in their consulting and selling efforts with customers, with the purpose to significantly increase probability of closing orders., • Hand-off the project to the Operations staff at the Project Kick-off Meeting., • Be a consultant to the Operations staff during the project phase while gathering feedback on quote accuracy for continuous improvement, • Reporting, • Keep Salesforce system up to date with RFQ case details, • Maintain proposal folders, quote templates, and pricing sheets, • Create reports as necessary, • Flexibility and the ability to remain highly organized and confidential while addressing diverse responsibilities., • Ability to make sound decisions independently and within a team setting., • Ability to be a team player., • Intermediate to advanced working knowledge of MS Excel/Word/PowerPoint/Project with demonstrated record of spreadsheet creation and maintenance., • Knowledge of accounting and financial operating systems., • Excellent written and oral communication skills., • Excellent attention to detail., • Strong ability to function in a fast-paced work environment., • Excellent analytical skills and solid aptitude with numbers., • Ability to follow company and department policies and procedures., • BS in Engineering, • Minimum 5 years’ experience in Engineering or Applications Engineering in the machine building industry., • Knowledge of industry accepted engineering practice., • Computer Aided Design experience., • Ability to create and present a project specific presentation., • Technical writing skills., • Computer skills including basic Microsoft Office Tools (Outlook, Word, PowerPoint and Project) and advanced Excel spreadsheet experience., • Experienced in the use of a database system for tracking customers and opportunities., • Must be eligible to work in the United States, • Must be able to travel as requested, • Must be available to work overtime, • May be required to work off shift hours and Holidays, • Willing and able to travel 10% of the year, including travel with little to no notice., • Must have a valid state Driver's license, • Must be willing and able to obtain a passport., • PTO, • 10 paid holidays (1-2 floating depending on start date), • Pet Insurance, • Excellent Medical, Dental, and Vision insurance, • Short Term Disability, Long Term Disability, Life Insurance & ADD, • FSA, HSA, • Bonus Eligible, • Employee Assistance Program, • 401k with matching up to 5%, immediately vested, • Tuition and Continuing Education Reimbursement

Job Description Truss Assembler will be responsible for the assembly of at least (1) product type: roofs, floors or wall trusses. The more product types learned, the greater the earning potential. Prior construction experience is helpful. Will be required to use hand tools and related equipment. Wage: Hourly wage plus production incentive Pay Range: $18.00 - 27.00 $2.00 Night Shift Differential Builders is open Monday through Friday (and Saturday pending business needs and season). Day and Night Shift opportunities! Check out our website builderscorp.com. To apply and review full job description click on our careers page. Benefits Vacation Leave Sick Leave 6 Paid Holidays Employee Discount 401k Retirement Plan (with company match) Profit Sharing Plan Insurance Medical Dental Vision Disability Life Medical and Dependent Flex Accounts HSA Account Builders has been serving the community for 40 years. We are a family oriented company seeking constant improvement to support services and being proactive in meeting our customer needs. We do this by building relationships with our customers in order to help them achieve their project goals with teamwork oriented staff, quality products and outstanding customer service. Our customers include contractors, builders, re-modelers and do-it-yourselfers. We offer building materials and home improvement essentials. Each location/department within our organization plays a vital role in helping our customers determine the best solutions for their project, home or commercial needs. Working as a core TEAM we guide our customers from start to finish no matter how large or small. Our Team sells, designs, builds and installs the products needed to assist our customers in achieving their goals. Customer Service is KEY to Exceeding our Customers Expectations.

Job DescriptionDescription: Intermountain Electronics (IE) is a leading provider and manufacturer of custom engineered Process, Electrical Control and Power Distribution turn-key solutions to the Data Center, Industrial, Power/Utility, Oil & Gas, Mining industries in North America. Our products range from large scale one-off custom Power Distribution, Control and Process systems to standard off-the-shelf electronic/electro-mechanical components. Reporting directly to the Final Assembly Supervisor we are currently seeking an Electrical Technician for our Night Shift to be based at our Denver facility. Why you will love working at IE You will love the challenge, interesting and varied work, and endless opportunities, but most importantly you will love working with a team of fun loving, driven, and generous go getters that take deep personal pride in being part of a family that is building the infrastructure that powers the world. To learn more about our company and our cutting-edge products, visit ie-corp.com. Job Description Job Title: Electrical Technician Benefits: • Competitive salary, • PTO (Paid Time Off), • Paid Holidays (10), • Medical and Dental Plans, • Teladoc 24/7/365 Access to U.S. Board Certified doctors, • Employee Assistance Program, • Company Paid Life Insurance, • Supplemental Vision, Life, STD & LTD Insurance, • 401K- Company match up to 6% of base salary., • Health Savings Account (HSA) with available company match up to $2000 based on family size. Work Schedule: Monday- Thursday, 3pm- 1:30am Essential Functions - Other Duties May Be Assigned. Technical • Interpret and work from technical assembly prints to wire and install electrical components, switch gears, electrical switches and electronic instruments and devices, such as programmable process controllers (PLCs), data loggers, relays, breakers and other electronic instrumentation equipment used in the manufacture and repair of electrical power stations and equipment, • Troubleshoot and diagnose cause of electrical or mechanical malfunction or failure of operational equipment and make necessary repairs, • Conduct electrical testing and recommend or initiate modification or replacement of equipment which fails to meet acceptable operating standards, • Work from schematics, diagrams, written and verbal instructions. Determine reparability and cost to repair equipment, refurbish equipment and replace defective parts., • Adjust, calibrate, align, and modifies circuitry and components and records effects on unit performance. Perform installations compliant with current electrical codes and MSHA regulations, • Various hand tools – wire strippers, crimpers, drill, razor knife. Multimeters, Volt-Ohm meters, Hi-pot, • Use overhead crane, forklift, hoists, to assist in electrical assembly and moving materials/projects, • Maintains regular and consistent job attendance, comes to work on time, • Follows and complies with IE Core Values, • Follow and comply with IE safety program., • Must maintain a safe and clean work area at all times INTERMOUNTAIN ELECTRONICS, INC. Date Prepared: 8/2011, Rev 1 3/2020 Requirements: Knowledge, Skills and Abilities • Associate's degree in Industrial Electricity plus two years' experience working on industrial electrical distribution equipment or an equivalent combination of education and experience., • Ability to read and understand wiring schematics and layout diagrams., • Experience with various hand tools, crimpers, wire strippers, electrical testing equipment., • Self-motivated and capable of working in a team environment with minimal supervision., • Confident with the ability to work closely with other technicians and management while keeping production flowing and meeting due dates., • Demonstrated proficiency to achieve high quality results in electrical assemblies, wiring and troubleshooting through continual attention to detail and anticipation of potential problems during the early planning and design review stages., • Must be detailed oriented and committed to producing quality work., • Must be able to get along with co-workers, supervisors, management, etc. Disclaimer: An offer of employment with Intermountain Electronics is conditional upon the successful completion of a background check and drug screen, subject to applicable laws and regulations. Intermountain Electronics, Inc. is an Equal Opportunity Employer

Job Description The future of aerospace and defense starts here. Ursa Major was founded to revolutionize how America and its allies access and apply high-performance propulsion, from hypersonics to solid rocket motors, satellite maneuvering and launch. We design and deliver propulsion and defense systems that solve the most urgent and critical national security demands. Ursa Major's teams innovate fast while applying appropriate rigor in developing world class industry leading products. We accelerate your career and provide an environment where you can see the results of your efforts two to three times faster than traditional companies. We are looking for a skilled, fast-learning individual who will serve as a central member of the team and take immediate ownership of rocket engine design efforts as a responsible engineer. This role will be part of the technical organization, responsible for clean sheet system design, development, qualification, and flight of a variety of propulsion hardware, as well as technical guidance and mentoring of a team responsible for engine hardware. Candidates will be expected to have ownership from the initial concept phase to a production-ready design. Responsibilities: • Lead and manage the team of engineers working to design, build, test and fly a family of Hypersonic engines. This role involves both their day-to-day management as well as their longer term career development and growth., • Own the family of Hypersonic engines from a technical, schedule, cost, and future capability roadmap perspective to ensure the engine is ready to power the next generation of hypersonic vehicles., • Ensure your Responsible Engineers have all the right tools and skills to succeed in executing their programs while providing guidance, mentoring, and a motivating vision for the teams., • Own and monitor the development, introduction to operations, development test, qualification, customer interface and flight readiness process for hypersonic engine programs so your Responsible Engineers have an achievable execution map to follow based upon the tools available, the high degree of rigor that ensures success, and complies with our quality policy., • Hire, staff, and mentor the hypersonic engine team with people who embrace Ursa Major's values, go-fast culture, and embody strong ownership of their designs and personal skill development while embracing collaboration, technical challenges, and drive for continuous improvement., • Be willing to role up your sleeves and lend technical and leadership assistance when required., • Create a culture within your team where everyone knows what success looks like, how they contribute to the success of programs, and they feel appreciated and recognized for their contribution to success., • Set high expectations of excellence for yourself and your team and mentor your team to achieve it. Push all teams to innovate wherever possible. Required Qualifications • Bachelor's degree in engineering, • 5+ years of relevant mechanical design experience, • Demonstrated understanding of computer aided design and drafting, • Experience with geometric dimensioning and tolerancing per ASME Y14.5, • Working knowledge of and hands-on experience with fluid, mechanical, and electrical systems, • Strong understanding of aerospace and defense industry standards and requirements, • Desire to take ownership and help wherever needed on the team, • Able to delegate tasks and lead large project scope, • Ability to work in a fast-paced environment and stay flexible based on customer demands and company priorities along with daily firefighting, • Either proven people / project leadership experience or a willingness to invest heavily in developing those skills quickly and thoughtfully Desired Experience • Liquid propellant rocket engine design, test, or analysis, • Prior track record leading technical teams, • Demonstrated proficiency with basic principles of design for additive manufacturing, • Solid understanding of both development and production manufacturing processes (machining, assembly etc), environments and challenges., • Familiarity with closed cycle rocket engines, • Experience operating in ISO 9001 or AS9100 certified organizations, • Experience with SMC-S-016 Test Requirements, • Experience with structural, fluids, and thermal analysis using Ansys FEA software, • Experience with Siemens NX CAD program and Windchill PLM software, • Master's or PhD in mechanical or aerospace engineering, • Component testing and validation experience in both low and high energy states, • Direct experience with flight qualification and flight support Colorado law requires us to tell you the base compensation range of this role, which is $155,000 - $190,000, determined by your education, experience, knowledge, skills, and abilities. What we can't quantify for you are the exciting challenges, supportive team, and amazing culture we enjoy. Classification: Full-time Exempt Benefits Include: (Please note, Interns are not eligible for benefits) • Unlimited PTO - Vacation, Sick, Personal, and Bereavement, • Paid Parental and Adoptive Leave, • Medical, Dental and Vision Insurance, • Tax Advantage Accounts (HSA/FSA), • Employer Paid Short and Long Term Disability, Basic Life, AD&D, • Additional Benefit Options Including Voluntary Life and Emergency Medical Transport, • EAP Program, • Retirement Savings Plan - 401k with Company Match, • Equity Grants in the Company How To Apply: Interested candidates are encouraged to apply by filling out the application below and clicking "Submit Application". This position will be posted for a minimum of 3 days and will remain open until filled or adjusted based on the volume of applicants. NOTE: Research suggests that women and BIPOC individuals may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage anyone who believes they have the skills and the drive necessary to succeed here to apply for this role.US CITIZENSHIP, PERMANENT RESIDENCY, REFUGEE OR ASYLUM STATUS IS REQUIRED.Eligibility to obtain and maintain a U.S. Security Clearance. We're an equal-opportunity employer. You will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.No outside recruiters, please.

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job title - Physical Substation EngineerJob location - Denver, CO (Centennial)Job type - HybridRequisition ID - 11180 We are seeking qualified candidates for a Mid Level Substation Physical Design Engineer with a strong background in high voltage substation design. Technical responsibilities will include the design of any / all the following: substation physical designs up to 500kV; computer modeling/analysis of electrical systems; preparation of specifications for equipment and systems; report preparation; applying codes and standards and performing and reviewing design calculations. Position will be responsible for leading design efforts and performing design duties with minimal supervision on multiple projects. Must be able to determine client requirements and coordinate technical efforts within discipline areas as necessary, coordinate with other disciplines as needed, manage a design budget and schedule, and be able to demonstrate proficiency in these areas. What You Will Be Doing: Detailed physical design for high voltage substations including creating or modifying: • Single line diagrams and general arrangements, • Detailed Elevations and section views, • Assembly and installation details, • Detailed bills of materials, bid units and material counts, • Electrical system studies and analysis software (ASPEN, ETAP, SKM, PSS/E, PSLF, CDEGS, WinIGS) experience preferred but not required, • Familiar with typical design software and tools (Bluebeam, AutoCAD, Inventor, Revit, Microstation) experience preferred but not required, • Coordination with other disciplines as needed, • Performing site visits for data gathering and asbuilts, • Writing material procurement and construction specifications & evaluating contractor bids, • Factory Acceptance, Witness testing and Reviewing shop drawings for Spec / Design conformance, • Reviews client equipment and design specs and confirms conformance with industry standards and best practices., • Performs typical calculations such as equipment and conductor sizing, rigid bus strength, insulation coordination, grounding and lightning protection, • Generating engineering fee estimates, • Providing field support during construction and commissioning, • Mentors and teaches less experienced engineers and design staff, • Occasional overnight travel may be required for client meetings and or site visitsRequired skills, education, and experience:, • BS from an ABET accredited University, • 5+ years of substation physical design experience, • Experience working directly with clients, supporting marketing proposals/efforts preferred, • Experience managing a design budget and schedule preferred, • Must have excellent verbal and written communication skills, • Must be able to work legally in the United States for any length of time

Job Description Please apply by copying and pasting the following link in your browser: Or visit our Careers Page: GENERAL POSITION DESCRIPTION The Production Shop Lead supports Habitat for Humanity of Metro Denver’s mission by providing hands-on leadership to ensure high-quality, accurately manufactured building components while coaching and motivating groups of volunteers and future homeowners in a safe, collaborative environment. The role oversees the efficient production of prefabricated components—such as wall panels, staircases, cabinets, siding, doors, and trim—while modeling best practices, reinforcing safety, and teaching proper construction techniques to meet quality and production goals. Through strong teamwork, attention to detail, and leadership by influence rather than authority, the Production Shop Lead helps increase operational efficiency and expand Habitat’s ability to build safe, durable, and affordable homes across Metro Denver. Someone who will thrive in this role is energized by helping people learn, grow, and feel confident while working toward a meaningful mission. They find deep satisfaction in creating an environment where volunteers feel valued, future homeowners feel supported, and every contribution has purpose. They enjoy bringing order, quality, and care to a busy shop setting. This person takes pride in their work and the opportunity to continue Habitat Metro Denver’s mission. The following reflects the organization’s definition of essential functions for the job but does not restrict the tasks that may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. CORE RESPONSIBILITIES: Leadership • Acts as an on-site ambassador for the mission of Habitat Metro Denver and demonstrates values and behaviors aligned with our Cultural Blueprint., • Oversees all activities in the shop through a lens of teamwork and continuous improvement., • Provides clear guidance and training to volunteers, helping them feel confident, valued, and positive about their experience., • Engages future homeowners in completing sweat equity hours in a way that reinforces Habitat’s mission and creates a meaningful, encouraging experience., • Provides an inspiring daily Habitat orientation to groups., • Provides guidance on standards, building plans, and works to help answer all questions volunteers may have., • Leads critical quality‐assurance efforts by performing production double checks, contributing to plan reviews, and ensuring workflows are organized and coordinated with field needs to improve efficiency and eliminate rework. Safety • Effectively communicates to volunteers and contractors that safety is the first priority in the shop., • Maintains site safety by adhering to Habitat construction safety policies, modeling best practices and guidelines, volunteer instruction and department monitoring., • Provides a clear safety orientation to groups each day., • Assigns individuals to tasks they feel comfortable performing and continuously monitors groups to ensure safe practices are followed., • Maintains all required safety certifications, including first aid, forklift operation, respirator fit testing, and other credentials relevant to shop production., • Verifies all engineered safety devices are in place and function as required. Construction • Conducts final inspections of all products prior to shipment, ensuring each item meets defined dimensions, standards for craftsmanship, and specifications., • Oversees prefabricated wall frame and stair production, including accurate product identification numbering., • Communicates defined quality standards for all prefabricated components, including wall framing, stairs, cabinets, doors, and trim., • Fabricates interior and exterior trim pieces to specifications., • Oversees and produces cabinet build packs for quality and accuracy., • Maintains cart repairs and rebuilds when necessary., • Inventories, cleans, and maintains shop tools., • Is onsite with Production Manager when initial wall framing is going up to ensure plans accuracy and fix any issues on the plans prior to the next shop build. Paint • Manages painting projects to ensure completion in accordance with the schedule set by the Production Manager., • Ensures all painted components meet Habitat Metro Denver’s standards for finish, durability, and color consistency by maintaining high‐quality application through clear communication and effective supervision of volunteers, • Oversees Disassembling of doors for paint and reassembling afterward., • Preps paint booth for painting days and maintains flooring in paint shop. KNOWLEDGE, SKILLS, & ABILITIES: • General knowledge of residential construction and painting., • The ability to teach volunteers of varied construction experience with enthusiasm and patience., • Proven ability to work in a fast pace, constantly evolving environment., • Demonstrated ability to work effectively and inclusively with diverse populations., • Outstanding communication and interpersonal skills necessary to communicate clearly and professionally with homeowners and volunteers., • The ability to understand plan reading to produce quality products., • Some knowledge of working with cabinets and become an expert builder capable of leading individuals through the assembly process., • Ability to identify, communicate, and solve problems efficiently., • Bi-lingual, English/Spanish, is highly desirable. EXPERIENCE: • Minimum 1yr of residential construction experience required. If residential construction experience gained outside of HFHMD, 2 years preferred., • Experience on large multi-family projects preferred., • Experience teaching in any capacity is preferred., • First Aid and Adult CPR and AED Certification preferred., • Forklift experience is a plus., • Habitat for Humanity or other similar nonprofit experience is a plus., • Organized construction training and/or education would be beneficial in this role. WORK ENVIRONMENT AND CONDITIONS, PHYSICAL REQUIREMENTS NECESSARY TO PERFORM THIS JOB: • In-person / in-office work model with most work performed indoors in production shop environment and a shared office., • Ability to adequately traverse a warehouse (i.e. climbing, lifting, carrying a minimum of 50 lbs., and other similar activities as required)., • Ability to lift at least 50 pounds on a regular basis., • Ability to safely use residential construction power tools and ladders safely and effectively., • Ability to walk, bend, squat, lift, and carry consistently for an 8 hour shift with required breaks throughout the day., • Ability to safely operate a construction vehicle (pickup truck or similar). Valid driver’s license and ability to be insured under the company’s insurance policy is prerequisite; driving is required. A Motor Vehicle Report (MVR) will be run for insurance purposes., • Ability to work in warehouse environment with concrete floors., • The environment can be very warm in the summer and cool not cold in the winter., • Loud and unexpected background noise is common., • Exposure to dust, debris, and odors (safety PPE provided). Starting pay range for this position is $24.40 - $27.45/ hr, with offers typically between the minimum to midpoint of the starting pay range posted depending on qualifications, internal equity and the budgeted amount for the role. Benefits available include medical, dental and vision insurance options with employer paying up 100% for employee only coverage; 401k with employer match up to 4%; paid time off for vacation, holidays, floating holidays; and parental leave; short and long-term disability; Healthy Families and Workplaces Act (HFWA) Leave; Paid Family and Medical Leave (PFML); and paid time to volunteer. At Habitat for Humanity of Metro Denver, we value diversity and strive to ensure that our practices and policies are equitable and inclusive. We do not tolerate harassment or discrimination of any kind. We are committed to complying with all federal, state, and local laws providing equal employment opportunities, and all other employment laws and regulations. It is our intent to maintain a work environment that is free of harassment, discrimination, or retaliation because of age (40 and older), sex, sexual orientation (including transgender status and gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), marital status, race, national origin (including ancestry), disability, creed, religion, genetic information, HIV status, military or veteran status, or any other status protected by federal, state, or local laws. Habitat Metro Denver is dedicated to the fulfillment of this policy in all aspects of employment, including but not limited to recruiting, hiring, placement, transfer, training, promotion, rates of pay, and other compensation, dismissal, and all other terms, conditions, and privileges of employment. Company DescriptionImagine a world where everyone has a decent place to live, and YOU have the opportunity to impact people every day through your work. Habitat for Humanity of Metro Denver has seen dramatic growth in the last five years. It’s an exciting time to join our team!Imagine a world where everyone has a decent place to live, and YOU have the opportunity to impact people every day through your work. Habitat for Humanity of Metro Denver has seen dramatic growth in the last five years. It’s an exciting time to join our team!

Job Description Xcimer Energy leverages decades of research on Inertial Fusion Energy (IFE) combined with groundbreaking new laser architecture. Our mission is to deploy fusion power plants to meet global decarbonization goals as fast as possible. Xcimer has assembled a team of leaders in tough tech, fusion science, and manufacturing with a track record of rapid execution. Supported by leading investors, Xcimer is uniquely positioned to deliver limitless, clean, fusion power to combat climate change. Join us in powering a better world with inertial fusion! As a Control Systems Engineer – Manufacturing & Automation, you will apply your expertise in industrial automation and PLC-based control systems to design, stand up, and support advanced manufacturing and assembly lines. You will work hands-on with PLCs, robotics, safety systems, fieldbus networks, and industrial IO to enable reliable, scalable, and repeatable production systems. We are looking for engineers who enjoy building systems from concept through commissioning and thrive in fast-paced manufacturing environments. Responsibilities • Design, develop, and commission PLC‑based control systems across process, manufacturing cells, motion control, and building automation, owning the work from initial concept through production deployment and operational handoff., • Support the stand-up of new manufacturing lines, including greenfield and brownfield deployments, equipment integration, and factory acceptance testing, • Program and debug PLC software using IEC 61131-3 languages (Structured Text preferred), with a focus on readable, modular, and maintainable code with object oriented programming, • Integrate and commission industrial robotics systems for part handling, assembly, inspection, and material movement, • Develop and configure fieldbus and industrial networking architectures, with a strong emphasis on EtherCAT-based systems, • Implement machine safety systems and interlocks in compliance with applicable safety standards (e.g., ANSI/RIA, ISO, OSHA), including the application of functional safety principles such as SIL or Performance Level (PL) where required, • Design and review electrical control schematics, panel layouts, and P&IDs in coordination with Electrical Engineering and external vendors, • Develop HMIs that balance operator usability with effective diagnostics and troubleshooting capability, • Interface machine-level control systems with higher-level manufacturing systems such as SCADA, MES, and data historians, • Troubleshoot and optimize automated equipment to improve throughput, yield, uptime, and overall equipment effectiveness (OEE), • Collaborate closely with Mechanical Engineering, Manufacturing Engineering, Quality, and Operations throughout the equipment lifecycle, • Support creation, deployment, and handoff of documentation into production, including operator and maintenance training, • Work with external machine builders, integrators, and suppliers to ensure system performance and complianceQualifications, • Education: Bachelor’s degree in Electrical Engineering, Controls Engineering, Mechatronics, or a related technical discipline, • Experience: 3+ years of hands-on experience developing and commissioning control systems for manufacturing or industrial automation environments, • Strong experience with PLC platforms used in manufacturing environments (e.g., Beckhoff, Siemens, Rockwell, or equivalent), • Demonstrated experience standing up or supporting process, manufacturing, or assembly lines, including integration of multiple machines or subsystems, • Proficiency with industrial fieldbus and communication protocols, including EtherCAT (required); experience with Profinet, Ethernet/IP, CAN, or Modbus is a plus, • Experience integrating sensors, actuators, servo drives, VFDs, and distributed IO in machine control systems, • Solid understanding of industrial electrical systems, control panels, and relevant codes and standards (e.g., NFPA 79, NEC, UL 508A), • Strong troubleshooting skills across software, electrical, and system-level issues, • Ability to work hands-on in a factory or lab environment, including occasional lifting, standing, and on-equipment debugging, • Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylumDesired, • Experience with Beckhoff TwinCAT, including EtherCAT configuration and distributed motion control, • Experience integrating industrial robots (e.g., FANUC, ABB, KUKA, Universal Robots), • Familiarity with functional safety concepts such as safety PLCs, safety IO, and safe motion, • Experience with machine vision systems used for inspection or alignment, • Experience with SCADA platforms (e.g., Ignition) and production data collection, • Experience supporting automated systems in a production or high-volume manufacturing environment, • Familiarity with version control, code standards, and structured documentation practices for control systems

Job DescriptionSalary: $80k - $110k Are you passionate about shaping the future of humanity's presence in space? Lunar Outpost, an industry leader in space robotics and planetary vehicles, invites you to join our team! Lunar Outpost is dedicated to creating a permanent presence in space, while also drivingpositive impacts here on Earth. Currently, we are seeking aMechanical Engineer, Prototyping/RapidDesignto contribute to our mission in a dynamic startup environment. The main responsibilities of aMechanical Engineer, Prototyping/Rapid Designinclude: Key Responsibilities: • Design parts and assemblies including vehicle structures, electronics packaging, mechanisms anddeployables applying best practices in CAD for parts and assemblies to ensure robustness and reliability in complex designs., • Perform basic loads and stress analysis(FEA and hand-calcs)tooptimizeparts for weight savings, and todemonstratedesigned parts and assemblieswill surviveanticipatedloads., • Participate inselectionof materials, hardware, actuators, sensors, etc., • Inspect and assemble hardware ofvarious types., • Participate in rapid prototyping effortsand test eventstovalidateconcepts quickly and cost-effectively., • Ensure mechanical designscomply withapplicable NASA standards (mechanisms approaches, structural margin, tolerancestackup, etc.)., • Prepare mechanical engineering products formilestone and safety reviews., • Collaborate witha team of engineers inanfast-paced environment,managing time allocations across multiple projectsandensureadherence to timelines, budgets, and quality standards., • Develop manufacturing plans for parts using a range of processes, including CNC milling, 3D printing, welding, turning, sheet metal bending, and water-jetting/laser-cutting. Required Qualifications: • 0-3 years of relevant mechanical engineering experience, • Bachelor's degree in Mechanical Engineeringor a related field, • Proficiencyin using SolidWorks for design of parts, assemblies, drawings, etc., • Proficiencyin setting up and interpreting Finite Element Analysis (FEA) models and analysis results, • Proficiencyin CAMand slicingsoftwares, • Proficient in creating part drawings, • Proficient in GD&T and design for manufacturing/assembly, • Prior experiencemaintainingCAD files/drawings in configuration management environment, • Demonstrated capability to rapidly create prototypes/proof of concepts, • Self-motivated, detail-oriented, and driven to meet critical deadlines, • Excellent organization and time management skills, • Excellent written and oral communication skills, • U.S. Person Preferred Qualifications: • CSWP certificate from DassaultSystemes, • Proficiencyin Bild,GrabCADWorkbench, Git, or similar CAD management software, • Proficiencyin CAM software (e.g.,HSMWorksorMasterCAM), • Experience designing ormaintainingautomobiles (shop, formula, baja, track, etc.), • Experience designing for human-factorsand ergonomics, • Proficiencyin prototype manufacturing techniques (CNC, welding, etc.), • Relevant experience in technology, hardware, and/or spaceflight startup environment, • Prior experienceonspace programs designing mechanical hardware, • Proficiencyin use of trade studies as a decision-making aid, • Prior experience in aerospace startup environment, • Relevant experience with NASA and Government customers, deliverables, reviews, and standards, • Familiarity with standard aerospace review process MCR, PDR, CDR, etc. Compensation & Benefits:Compensation level and base salary are competitively structured and thoughtfully determined based on factors such as relevant skills, experience, education, and the scope of the role. • Comprehensive health coverage: Medical, dental, and vision benefits, with 70% of premiums covered by the employer, • Paid time off: Three (3) weeks per year of vacation, • Retirement plan: Up to 4% employer match on 401(k) contributions, • Paid holidays: 11 company-recognized holidays, • Parental leave, • Educational reimbursement opportunities to support company objectives, continued learning, and career development Lunar Outpost Inc. is an equal opportunity employer. Lunar Outpost Inc. does not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, ethnicity, age, disability, veteran status, genetic information, or any other characteristic protected by applicable law. All employees, including executives and human resources personnel, are expected to conduct themselves with professionalism and treat others with dignity and respect in accordance with this policy.

Job Description Job Title: Product Design Engineer Department: Engineering Reports To: Engineering Director FLSA: Exempt Status: Full Time Schedule: Monday-Friday Direct Reports: None Location: Denver Tech Center (near Centennial airport) Remote: 2 days/wk remote with 2 days in office Who We Are A multi-national well-established Original Equipment Manufacturer. Our brands have a long-standing and significant presence and brand recognition within their target markets and industries with a strong emphasis on total customer satisfaction. The Gulftech International family of companies are the world’s recognized leaders in engineering, manufacturing, lease, sale and service of industrial food processing machinery. Our companies serve the largest food production and processing companies across the globe. Position Scope: This position provides the opportunity to work in a unique and innovative technical environment for a highly successful international OEM of food-processing-equipment. Engineering team members work on a diverse range of complex machine designs while making improvements to existing equipment and developing new machinery and products. Summary of Duties and Responsibilities: • Provide mechanical engineering design, prototype build and test, and documentation creation of state-of-the-art new food machinery products., • Recommend and implement progressive improvements to machinery in the areas of design-for- manufacturing, cost, quality and performance., • Perform form, fit & function analysis for parts and assemblies. Convey proper design intent using Geometric Dimensioning & Tolerancing practices governed by ANSI Standard Y14.5.2., • Use standard engineering principals and design practices to make the necessary calculations, failure risk assessments and design drawing updates as required to meet customer safety requirements, ergonomic requirements and performance specifications., • Use Solidworks to create complete documentation including part, sub-assembly and top-level assembly drawings and associated bill-of-materials of equipment., • Work seamlessly with Manufacturing, Sales, Service and Marketing to create new products and improve existing products., • Work closely with Procurement to support second and third-party manufacturing requirements., • Work with Product Data Management (PDM) team to create manufacturing documentation and instruction manuals., • Work well with other Engineers to complete larger scale projects. At times function as a project team leader: organizing, assigning, and tracking task completion as needed. Summary of Qualifications: • Bachelor’s Degree in Engineering, • A minimum of 7 years of experience utilizing engineering principles in product design and/or related mechanical design work., • Design experience in sheet metal, weldments, machined metal, castings, and plastic parts., • Experience making mechanical part designs utilizing SolidWorks and/or a similar CAD package., • Demonstrated skills in:, • Effective self-management of tasks and schedules, • Working well with other engineers to complete projects, • Effective verbal and written communication skills, • Ability to work effectively in cross functional teams, • Hands on fabrication, assembly, and testing of new designs *Atlas Pacific is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law.

Job DescriptionField Service Engineer – Founding Team ARES Scientific| Accelerating medical breakthroughs with innovative solutions Some engineers design systems. Others install and maintain them. This role does both while helping build an entire service organization from the ground up. At ARES Scientific, we partner with leading hospitals, universities, and research institutions to design and deploy the laboratory infrastructure that powers modern science. From high-performance cold storage systems and laboratory washers to pathology equipment and automation platforms, we help create the environments where discovery happens. Every installation we complete supports scientists and clinicians working on the next generation of medical breakthroughs. As ARES continues to grow, we are launching a Field Service Department to support the sophisticated systems we install across research and clinical environments. We’re looking for a Field Service Engineer who enjoys solving technical problems in the real world — someone who thrives in the field, works well with their hands, and wants to help build the standards and systems of a new service organization. This is not a ticket-driven service role. This is a builder role. The Team You’ll Join While ARES Scientific is launching a new Field Service Department, you won’t be starting from scratch. You’ll work alongside a senior Service Technician who has been with the organization for over 15 years as well as a Director of CX who has been leading technical installations for the same amount of time, bringing deep experience with laboratory environments, equipment logistics, and customer relationships. Together, you’ll combine institutional knowledge with new engineering capabilities to help build a modern service organization that supports leading research and clinical facilities around the world. What You’ll Do Lead Equipment Installations • Lead installations of Optimice systems and laboratory infrastructure, • Perform mechanical assembly, system alignment, and installation verification, • Coordinate installation logistics with customer facilities teams, • Conduct system commissioning and client walkthroughsTechnical Site Assessments, • Perform site evaluations and layout verification, • Review facility drawings and installation plans, • Coordinate with contractors, facilities teams, and project managersClient Training & Support, • Provide post-installation training and operational walkthroughs, • Support clients during equipment startup and integration, • Ensure installations meet ARES quality and safety standardsHelp Build the Service Organization, • Contribute to developing ARES Scientific’s service capabilities, • Help establish service standards, documentation, and installation protocols, • Support expansion into servicing:, • Mopec pathology equipment, • Steelco washers and sterilization equipment, • Visron automation systems, • Field Operations, • Travel to customer sites for installations and service visits, • Maintain installation tools and service equipment Required • Bachelor’s degree in Mechanical Engineering, Biomedical Engineering, Electrical Engineering, or a related technical field (or equivalent experience), • 3+ years of experience in field service, equipment installation, or technical engineering roles, • Strong mechanical aptitude and hands-on technical skills, • Ability to read technical drawings, layouts, and installation plans, • Strong problem-solving and troubleshooting ability Experience working with: • Laboratory or medical equipment installations, • Sterilization equipment or washers, • Laboratory automation systems, • Pathology equipment, • Biomedical or research environments, • Travel required for installations and service work, • Help build ARES Scientific’s service organization from the ground up, • Work directly with top hospitals, universities, and research institutions, • Install advanced laboratory and medical equipment, • Combine hands-on engineering with real-world problem solving ARES Scientific provides innovative laboratory infrastructure solutions that support cutting-edge medical research and clinical work. Our systems are used by leading institutions around the world to improve laboratory performance, reliability, and efficiency. By helping laboratories operate at their best, we play a small but important role in accelerating the scientific discoveries that improve human health. If you’re energized by solving real-world engineering challenges and helping build something meaningful, we’d love to hear from you. The First 12 Months in This Role First 90 Days • Learn ARES Scientific’s equipment portfolio and installation procedures, • Support installations and begin participating in field deployments, • Work closely with the senior service technician to understand operational workflows, • Assist with site assessments and installation preparationMonths 3–6, • Begin leading Optimice rack installations, • Conduct client walkthroughs and operational training, • Support installation planning and project coordination, • Help improve installation procedures and documentationMonths 6–12, • Become a primary technical lead for installations, • Help expand ARES service capabilities across additional equipment platforms, • Contribute to building the foundation of ARES Scientific’s service departmentBy the end of your first year, you will have helped establish the operational foundation of a growing service organization supporting laboratories around the world. A Day in the Life No two days look exactly the same, but a typical week might include: Monday — Installation Planning • Review project layouts and site drawings for an upcoming laboratory installation, • Coordinate logistics with the customer’s facilities team, • Prepare installation tools, equipment, and materialsTuesday–Wednesday — On-Site Installation, • Travel to a hospital or research facility, • Lead the installation of an Optimice storage system or laboratory infrastructure, • Perform mechanical assembly, alignment, and system verification, • Work directly with lab managers, facilities teams, and contractorsThursday — Commissioning & Client Training, • Complete system checks and commissioning, • Conduct a client walkthrough and operational training, • Ensure the system is fully operational and ready for laboratory useFriday — Service Development, • Document installation insights and improvements, • Help refine ARES installation procedures and service protocols, • Coordinate upcoming installations and future service opportunitiesSome weeks will involve travel to new research facilities all over the world, problem-solving unexpected challenges in the field, or learning new equipment platforms. Other weeks may focus on planning, training, and improving service processes as ARES Scientific’s service department continues to grow. Compensation· Base Salary - $80k - $120k· Annual Performance Bonus – 5 – 10% of salary o Service revenue growtho Customer satisfactiono Installation efficiency· Travel Compensationo Hotels – Marriott properties paid by the company. Points held by the employee.o Flights – Company paid. Points held by the employee.o Mileage – IRS Rate (~0.67 mile)· Tools and Equipment Packageo $4k - $8k budget· Sales Finder’s Fee – Variableo Finder’s Fee for sales assistance on site.· Health Insuranceo HSA insurance plan. 70% covered by employer for employee portion. 50% paid for spouse and dependent· Retiremento Safe Harbor 401k match offered· Disabilityo Short and long-term paid by the company· Retention Bonuso Founding Service team members receive a $10k retention bonus after 3-years.

Job Description Xcimer Energy leverages decades of research on Inertial Fusion Energy (IFE) combined with groundbreaking new laser architecture. Our mission is to deploy fusion power plants to meet global decarbonization goals as fast as possible. Xcimer has assembled a team of leaders in tough tech, fusion science, and manufacturing with a track record of rapid execution. Supported by leading investors, Xcimer is uniquely positioned to deliver limitless, clean, fusion power to combat climate change. Join us in powering a better world with inertial fusion! As a Mechanical Engineer, you will play a critical role in the design, analysis, build, and operation of laser, pulsed power, vacuum vessel, and ancillary mechanical systems that are central to Xcimer’s excimer‑laser‑based IFE technology. You will contribute across the full product lifecycle—from early prototype systems through the design and demonstration of a power‑producing inertial fusion reactor. We are seeking engineers who bring strong technical depth, hands‑on problem-solving skills, and a passion for building high‑performance hardware that will redefine the future of energy. Responsibilities • Design and perform structural & thermal analysis for laser components, pulsed power, vacuum, and optical conditioning components using finite element analysis (FEA) for static as well as transient conditions., • Create 3D models, detail part drawings, assemblies, P&ID’s and interface control documents., • Design pressure and vacuum vessel components, perform proof-tests to code standards., • Communicate and document design with mechanical, systems, laser and optical engineering and manufacturing team members., • Support procurement of the hardware for the prototype laser amplifiers and optical conditioning equipment., • Oversee and assist assembly by a team of interdisciplinary technicians., • Support ongoing operation of the subject equipment and systems., • Continue above roles and responsibilities to participate in subsequent amplifier up-scaling leading to that which is needed for a power-producing IFE reactor., • Participate in concept studies supporting the use of these lasers in a power-producing IFE reactor, and other applications., • Contribute to authoring work instructions, test plans, specifications, and other documentation for the integration and operation of complex systems of systems, • Provide manufacturing and production support and first-time engineering builds, • Participate in subsystem test planning, execution, data reduction and analysis, • Work with cross-functional teams that are responsible for selecting materials, manufacturing processes, and suppliers to produce world class hardware., • Plan, coordinate, conduct tests, and review test data, • Maintain and report on activity schedule, budget and technical status, • Identify opportunities for improvements and operational cost savingsQualifications, • Education: B.S. degree in engineering (or equivalent discipline)., • Experience: 5+ years of experience engineering vacuum or gas delivery systems., • Proven experience in vacuum system design and/or test., • Experience in selecting pumps and instruments., • Strong understanding of valves, pressure vessels, flex elements, fittings, and related hardware., • Knowledge of fabrication and integration processes, including tubing/piping and machined components., • Working knowledge of materials, coatings, and treatments., • Hands‑on experience troubleshooting hardware., • Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Desired, • Experience with high‑vacuum systems and cryogenic pumps., • Familiarity with noble and reactive gas properties., • Experience designing valves and other fluid components., • Background with data acquisition systems., • Experience with orbital tube welding processes.

Job DescriptionDescription: IMMEDIATE OPENINGS FOR EXPERIENCED AIRCRAFT MECHANICS. RELOCATION ASSISTANCE AVAILABLE. Position Summary: Maintenance Technicians are responsible to the Maintenance Supervisor and shall assure that the procedure outlined in this manual as well as all FAA Regulations and manufacturer's instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, and major inspections on Pilatus PC-12 and PC-24 aircraft. Troubleshooting, repair, and modification of aircraft systems and engines is accomplished by this position. In addition, component removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the AMT. The AMT is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions and Responsibilities: • Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator., • Responsible for planning and coordinating the activities of their shop or area, so as to minimize delays and increase production and efficiency., • Ensure that all work accomplished will be completed in strict accordance with the manufacturer's maintenance and repair instructions and TITLE 14 CFR part 43., • Exercise all reasonable care to protect all parts- sub assembles; major assembles and completed units against loss or damage., • Ensure that all applicable repair station forms utilized are properly completed., • Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times., • Ensure that proper tools and equipment are available, and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. He will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate., • Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department., • Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders., • Communicates with the maintenance lead technicians concerning progress of the assigned work., • Perform airframe and powerplant repairs, inspections and modifications., • Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system., • Interpret technical manuals, drawings and blueprints., • Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc., • Displays and promotes a positive attitude toward work and other employees., • Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect., • Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks., • Identify any employees' problems and concerns and deal with them, if unable to solve the problems, forward them to management., • Technicians shall have all their work inspected (except for off-site maintenance, see off-site maintenance requirements) by an appropriately rated inspector as listed on the Roster of Management Supervisory and Inspection Personnel at the completion of each task., • Participates with management to strategize and implement new maintenance tactics., • Provide leadership and communication to subordinates and employees. Anticipated Application Closing Date: 10/31/25 Requirements: Education: • Five or more years related experience and/or training; or equivalent combination of education and experience., • Five or more years demonstrated experience in aircraft maintenance inspections and repairs., • Clean driving record., • Able to pass a background check., • Ability to pass a drug screening test., • Attention to detail., • Persistence in the face of obstacles., • A willingness to take on responsibilities and challenges., • Being reliable, responsible, and dependable, and fulfilling obligations., • Being pleasant with others on the job and displaying a good-natured, cooperative attitude., • Being sensitive to others' needs and feelings and being understanding and helpful on the job., • Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods., • Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations., • Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace., • Results oriented Proven ability to achieve goals. Follows through and meets deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills., • Communication Oral Communication speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings. Written Communication Writes material in clear concise terms.

Job DescriptionXcimer Energy leverages decades of research on Inertial Fusion Energy (IFE) combined with groundbreaking new laser architecture. Our mission is to deploy fusion power plants to meet global decarbonization goals as fast as possible. Xcimer has assembled a team of leaders in tough tech, fusion science, and manufacturing with a track record of rapid execution. Supported by leading investors, Xcimer is uniquely positioned to deliver limitless, clean, fusion power to combat climate change. Join us in powering a better world with inertial fusion! As a Senior Structural Analyst, you will perform structural and mechanical analyses using classic hand calculations and finite element model (FEM) simulations to support design, manufacturing, assembly, and test. A thorough understanding of structural behavior, static and dynamic loading, and margins is required to achieve system performance and cost-optimized designs. You will create concise, accurate analysis documentation; perform peer reviews of analysis and reports; and provide analysis guidance to design engineers and junior analysts. As hardware matures from prototype builds through integrated test campaigns, you will also help resolve nonconformances, support root-cause investigations, and enable rapid iteration through close collaboration with engineering and operations. Responsibilities • Perform structural and mechanical analyses for opto-mechanical, thermal-mechanical, fluid-structure interactions, and support-structure hardware to support design, manufacturing, assembly, and test., • Validate finite element models based on internal and external data., • Create analysis documentation that is concise, accurate, and traceable; produce reports supporting design reviews and test readiness., • Perform peer reviews of analysis and reports generated by other team members and incorporate feedback., • Provide analysis guidance to design engineers and mentor junior analysts; help establish best practices for modeling, margins, and documentation., • Support prototype builds and test operations by troubleshooting structural/mechanical issues, dispositioning nonconformances, and recommending corrective actions. Qualifications, • Education: B.S. degree in mechanical engineering (or a related engineering field)., • Experience: 8+ years of structural/mechanical analysis experience supporting engineered hardware (e.g., energy, aerospace, automotive, or high-precision machines)., • Experience with one or more commercial FEA tools (e.g., Altair, ANSYS, Abaqus, Nastran) and best practices for model verification/validation., • Demonstrated knowledge of load paths and stress analysis bolted joints, weldments, frames, mounts, and pressure-containing components., • Demonstrated experience with static and dynamic FEM simulations., • Strong fundamentals in classical mechanics of materials and structural sizing methods (hand calculations, closed-form solutions)., • Knowledge of engineering materials, manufacturing processes, and how they influence structural performance, tolerances, and reliability., • Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Desired, • M.S. degree in mechanical engineering (or equivalent advanced degree/experience)., • Experience supporting test campaigns, instrumentation/strain gauging, and correlation of analysis to test results., • Proficiency with Altair Optistruct and Radioss, • Experience with nonlinear materials, vibration, fatigue, creep, high temperatures, and ceramic materials., • Experience applying ASME Boiler and Pressure Vessel Code requirements to analyses., • Demonstrated experience using scripting languages (e.g., Python, MATLAB, VBA) to automate analyses, post-process results, and improve repeatability and efficiency., • CAD and PLM experience (NX and Teamcenter)

Job Description About Urban Sky: Urban Sky is a venture-backed aerospace startup that pioneers utilization of the stratosphere and reimagines the way humans view and analyze the earth. We design, build, operate, and sell stratospheric balloon systems, and the data we collect supports a wide range of applications, from real-time wildfire monitoring to urban mapping. Our technology is also employed by government customers including the Department of Defense (DoD), NASA, and others. Urban Sky sends flight vehicles to the stratosphere on a weekly basis. Our team consists of engineers, makers, developers, and doers who believe in the power of human potential when passion meets utility within a small, supportive team. At Urban Sky we strive to create a team culture grounded in candor, inclusion, respect and empowerment. We aim to build the next chapter of stratospheric history in Denver and are seeking self-starting, open-minded, and hard-working team members. About The Role: • We're looking for a Staff Software Engineer who wants real ownership in a fast-moving environment., • You'll help design, build, deploy, and operate the software that runs Urban Sky's manufacturing operation—a full-stack MRP system that tracks inventory, work orders, bills of materials, quality holds, and serialized parts from receiving through final integration. It's the operational backbone of how we actually build balloons. Because the company is growing quickly, the scope of the role will evolve over time, and you'll have meaningful influence over what we build next and how we build it., • You'll work shoulder-to-shoulder with the people using the software every day—manufacturing technicians, logistics coordinators, quality inspectors, and finance. There's no product manager between you and them. You'll learn how parts flow through the building, what makes a quarantine workflow painful at 3pm on a Friday, and how a missed traceability record turns into a compliance problem. Translating messy physical processes into clean software is most of the job., • The interfaces you build are for operators, not consumers. A shop-floor tech holding a tablet, scanning a barcode, working through a multi-step assembly procedure—that's your user. Touch targets, scanner integration, and drag-and-drop work instructions matter more than landing-page polish., • We operate in an aerospace-regulated environment (AS9100). Every mutation needs an audit trail. Serialized parts need end-to-end traceability. "Move fast and break things" doesn't apply to production data. We still move fast—but with the discipline that comes from knowing a corrupted record can ground a flight., • You don't need prior MRP or manufacturing experience. You do need to be excited—or at least not intimidated—by learning a complex business domain alongside the code., • Our overall software team is roughly 7 people, and this team will be just 2 people, everyone works across the stack. That's not aspirational—it's required. A small team with real ownership only works if everyone can contribute quickly and adapt as the company and product evolve., • We expect senior engineers to become productive almost immediately., • In your first days and weeks, you will:, • Set up your environment and start committing code within your first day or two, • Learn existing systems by improving them, not by watching from the sidelines, • Fix bugs, tighten rough edges, and ship small enhancements to production, • Participate in deployments, debugging, and operational workflows, • Use AI tools from the start to understand the codebase and accelerate contributions, • Ask questions, propose improvements, and engage in technical decisions, • You won't be waiting for a long ramp period., • As you gain context, scope expands fast., • Within your first couple of months, you'll be expected to:, • Own meaningful areas of our stack across backend, frontend, and infrastructure, • Lead design and implementation of projects that may span quarters, • Make architectural decisions with an eye toward reliability, operability, and future change, • Work directly with operators and stakeholders—often non-engineers—to refine solutions, • Drive systems from concept → implementation → production → iteration → support, • Continuously simplify, improve, and evolve what you own, • Help the team move faster by raising technical quality and reducing friction, • By this point, you're not just contributing—you're a primary owner., • There are no lanes to stay in and no handoffs to hide behind., • If something feels confusing to an operator, that's an engineering problem., • If a system is brittle, slow, or overbuilt, that's an engineering problem., • If a workflow on the shop floor doesn't match the software, that's an engineering problem., • If requirements change mid-stream, that's reality—and adapting thoughtfully is part of the job., • If AI-generated code is messy, that's also an engineering problem., • These principles guide how we build systems in a fast-moving, real-world environment., • Design for operations, not just implementation, • Software doesn't stop at merge. We design systems that can be deployed, monitored, debugged, and safely operated under changing constraints., • Favor simple, adaptable systems, • Clarity beats cleverness—especially when systems need to change quickly., • Own the full lifecycle, • Engineers are responsible for their systems from design through production, operational support, and ongoing evolution., • Build reliability through feedback, • Observability is a first-class concern. Logs, metrics, and traces help us understand how systems behave as usage and requirements change., • Use abstraction sparingly and intentionally, • Abstractions should make change easier, not harder. If they obscure failures or slow iteration, they're the wrong choice., • Scale and evolve based on evidence, • We increase complexity, performance, and scale in response to real operational needs—not speculative futures., • Leverage AI with engineering judgment, • We use AI aggressively to increase velocity and explore solutions, while remaining fully accountable for correctness and maintainability., • Embrace iteration as the default, • AI isn't supplemental here. It's a core part of our SDLC., • We use Claude Code for feature implementation, run automated multi-agent code review on pull requests, and have AI-driven quality checks integrated into CI. A meaningful portion of production code is AI-written and human-shaped. The skill we care about isn't typing speed or autocomplete—it's the judgment to review, restructure, reject, or rewrite AI output until it's correct, readable, and operable., • We expect you to:, • Use AI tools daily for implementation, debugging, refactoring, and exploration, • Adapt quickly as tools, models, and workflows evolve, • Apply strong judgment to AI-generated code—you're accountable for what ships, not the model, • Use AI to build production systems, not just prototypes, • Treat AI as leverage, not a replacement for understanding, • This is a senior role. We're optimizing for experience, judgment, and adaptability., • You likely have:, • 8+ years of professional software engineering experience, • Strong fundamentals in system design, data structures, and architecture, • Experience building and operating backend systems at scale, • Solid instincts for data modeling, schema design, and SQL, • Comfort with cloud infrastructure and modern DevOps practices, • Experience owning production systems in environments that evolve quickly, • Strong communication skills and the ability to collaborate as priorities shift, • You probably enjoy:, • TypeScript and modern web development, • Designing clean APIs and well-structured monoliths, • Thinking carefully about data models, schemas, and migrations, • Infrastructure, reliability, and operational excellence, • Mentoring others and raising the bar for the team, • We currently work with technologies such as:, • TypeScript / JavaScript, • React, Vite, Mantine UI, • tRPC for API contracts, • PostgreSQL (raw SQL and migrations, not just an ORM), • ClickHouse for analytics, • Playwright for end-to-end testing, • AWS, Terraform, Docker, • CI/CD pipelines, • Salary $150,000 - $180,000 per year, • Stock Options, • Medical, Vision and Dental, • Unlimited Vacation Days, • Cell Phone Bill Stipend Urban Sky is required to post this salary range per Colorado law. Your salary will be determined based on your abilities and experience. Colorado Pay Transparency$150,000—$180,000 USD NOTE: Research suggests that women and BIPOC individuals may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage anyone who believes that they have the skills and the passion necessary to succeed here to apply for this role. This position may require the candidate to deal with commodities, software, technology, defense articles, and/or technical data which are subject to the Export Administration Regulations and/or the International Traffic in Arms Regulations. Additional information may be requested so as to determine whether export authorization is required from the Bureau of Industry and Security and/or the Directorate of Defense Trade Controls. If authorization is required, employment will be contingent upon the Company successfully obtaining such authorization from the relevant government agency. Urban Sky is an equal opportunity employer, and we value diversity. All employment is decided on the basis of qualifications, merit, and business need.

Job DescriptionSalary: $20-$28/hour Engineering Technician Rocky Mountain Scientific Laboratory Department:All Location:Littleton, Colorado U.S. Citizenship Required for this Position:Yes Clearance Level Must Currently Possess or be Able to Obtain:N/A Travel:Yes Schedule:Full-time Description of Business Environment: Peace is often associated with passivity. At Rocky Mountain Scientific Laboratory, we associate peace with strength, courage, and action. We know that enabling peace to prevail is not for the faint of heart, which is why we built our company foundation on the core values of Integrity, Gratitude, Mission Driven, and Grit. We pride ourselves in providing unequaled services and technologies in the field of applied energetics to our customers. Our experts possess extensive knowledge and capability in energetic materials and military systems enabling them to offer analytical characterization, modeling & simulation, design, system integration, prototyping, test engineering, and proof-of-concept production services covering a wide range of applications. Our strengths lie in our ability and relentless determination to get the job done quickly and affordably. RMSL is an Equal Employment Opportunity (EEO), Affirmative Action employer and welcomes all qualified applicants. All qualified applicants will receive fair and impartial consideration for employment without regard to race, color, religion, sex, age, disability, veteran status, national origin or other legally protected status. An applicant with a disability or a disabled veteran can request reasonable accommodation to apply for one of our positions. Specific Job Description: RMSL is a growth company with an outstanding job opportunity for an Engineering Technician. This position will report to the Technical Services Team Lead or Technical Services Group Manager but frequently receive direction from other Group Managers within RMSL. The Engineering Technician will be an integral part of a number of cross functional teams working on exciting development projects with cutting-edge technology. In this role, the ideal candidate will have a background in manufacturing, automation, fabrication, engineering, or related scientific field with proven versatility and adaptability. This role will support all 6 groups within RMSL as the needs arise. These groups are: Advanced Chemistry & Chemical Processing Group Armaments Development Group Automation & Robotics Group Dynamic Testing Group Special Projects Group Technical Execution Group This individual must demonstrate innovative thought, an understanding of the fundamentals of engineering, an ability to learn, an ability to take and follow direction, out-of-the-box thinking and creativity all while following defined and implied safety operating procedures and following RMSL core values. Duties Include: • Support of various mechanical design activities, • Concept generation and collaboration, • Respectful and productive brainstorming, • Technical documentation, • Support of process definition, • Identification and documentation of safe handling practices, • Design, source selection, installation, maintenance, and operation of specialized instrumentation and testing equipment., • Compliance in restricted information security regulations, • Compliance in explosive storage and handling regulations, • Help assist in the setup, execution, and tear-down of field and laboratory experiments, • Help assist in the data compilation, analysis, and recording of tests for report generation, • Ability to handle materials with strict adherence to safety process requirements, • Potential travel to assist ongoing project needs (<~1 month in total) Required Skills: • Problem solver that can work in a fast-paced team environment on projects, • Hands-on experience with energetic materials or other hazardous materials, • Proficient in standard laboratory practices, • Exercises creative thinking and innovation, • Strong verbal and written communication skills, • Physical requirements:, • Must be able to sit for extended periods of time; must be able to lift up to 50 lbs.; must have the ability to see near and far and work with a computer monitor on a daily basis, • Required to bend, sit, stand and lift to perform job effectively, • Must be able to work overtime as required, • Fabrication, machining, carpentry and general assembly proficiency, • Operate (or be able to be trained to operate) a Forklift., • Be able to prepare for and handle adverse weather conditions (heat, cold, wind, etc). Highly Beneficial Skills: • Familiar with general explosive effects, • Knowledge of basic-intermediate chemistry and/or chemical engineering, • Computer Aided Design (SolidWorks), • Electrical concepts and fundamentals (wiring, switching, communications, etc), • PLC Programming and/or troubleshooting, • Mechanical assembly and/or fabrication, • Manufacturing experience Minimum Qualifications: • Must be able to demonstrate the ability to work productively within a team, • General fabrication, assembly, machining, or carpentry experience/proficiency, • Ability to obtain security clearance if requested Benefits: • Medical insurance, • Dental insurance, • Vision insurance, • 401(k) with matching, • Disability insurance, • Life insurance, • Paid time off, • Professional development, • Flexible schedule

Job Description At Wold you will be part of a creative, energetic environment that allows you to be challenged and fulfill your potential. Employees work in integrated teams of architects, interior designers, mechanical and electrical engineers focused on total design solutions for our clients. Wold Architects and Engineers, a full-service architecture and engineering firm, seeks to add a relationship driven, talented, motivated, creative, experienced architect, with a focus on Government projects, for a full-time position in our Denver, Colorado office. This individual will be focused on expanding Wold ‘s Government Architecture vertical in the Denver area, ambitiously growing business opportunities through relationship building and thought leadership at a Partner Level. Strong candidates for this role will have experience and expertise in government architecture business development processes, government design, and a concentration on client experience and collaborative leadership. PRINCIPAL DUTIES AND RESPONSIBLITIES • Independently and jointly develops and manages a strategic relationship network and provides leadership resulting in business development activities that promote partnership and total design solutions in the Government Architecture area and increasing Wold’s market share., • Engages in various business development activities to grow the practice, maintaining and developing new relationships that lead to revenue and high client satisfaction., • Responsible for client relationship from identifying client problems, partnership for a solution, funding, as well as thought and project leadership throughout a project to ensure the utmost client satisfaction, and long-term relationship following the completed project., • Acts as champion throughout the RFP process, partnering with internal resources to assembly responses and prepare for interviews as needed, • Coordinate with our Marketing team for conferences, client events, and project interviews. QUALIFICATIONS • Professional Licensure in Architecture with experience in Government Architecture., • Experience in a Client Relationship/Experience Management and/or business development role with clients in the government sector, • Self-motivated, entrepreneurial self-starter with the ability to navigate complex beauracracies and influence decision makers, and a strong desire to learn, • Ability to establish and maintain strong and positive client relationships, • Strong leadership, organization, communication and interpersonal skills, • Excellent oral and written communication skills, • Ability to work as part of a team with professionals at all levels, • Strong interpersonal skills, including communicating in person, by e-mail and by telephone, • Must be willing to travel BENEFITS • Hybrid Work Schedule, • Frequent Employee Events, • 6% 401(k) company match, • PTO frontloaded for immediate use, • FSA, • HSA, • FMLA, • Life Insurance, • Dental Insurance, • Health Insurance, • Paid Parental Leave, • Paid Volunteer Time, • License Reimbursement, • Dependent Care Assistance, • Short-term Disability Insurance and Long-term Disability Insurance COMPENSATION: The compensation structure for this position will be commensurate with the senior leader level of responsibility. Wold Architects and Engineers offers a comprehensive compensation package including competitive salary and various bonuses and incentives. Employees are eligible to participate in a benefits package that includes a comprehensive medical benefit, vacation time and a matching 401K plan.

Job Description Sterile Processing Account Specialist (Hospital-Based) Denver, CO | Full-Time | Monday–Friday | $60,000–$70,000 (based on experience) + Full Slate of Benefits Ready to use your SPD experience in a role that’s more leadership and problem-solving - and less daily tray assembly? We’re hiring an experienced Sterile Processing professional to support one dedicated hospital account in Denver, CO. This is a hands-on, clinical role where you act as the on-site expert improving workflows, supporting teams, and keeping the OR running smoothly. No travel. No shift work. No bouncing between facilities. Just one hospital where you can truly make an impact. What You’ll Get • $60,000–$70,000 base salary (based on experience), • Monday–Friday schedule (hours aligned with the facility), • No weekends, no holidays, no travel required, • Health, dental, vision, 401(k), PTO & sick time, • Stable, full-time hospital-based role, • Partner daily with SPD and OR leadership, • Ensure tray readiness and case support, • Audit trays, instrumentation, and workflows, • Identify and fix inefficiencies before they impact cases, • Lead hands-on training and in-services, • Support process improvements and standardization initiatives What We’re Looking For • 5+ years in Sterile Processing, Central Services, OR, or surgical services, • Strong knowledge of instrumentation and tray workflows, • Comfortable working directly in SPD/OR environments If you’re ready to step out of shift work and into a role with more ownership, visibility, and long-term growth, we’d love to connect. Apply today. Rep-Lite receives a large volume of resumes for each position and regretfully cannot respond to each application. If we have an interest in speaking with you further, we will email a request for a video interview. Sometimes these emails end up in spam/junk so please make sure you are checking them periodically; the sending domain will be @applytojob.com. Thank you for your interest in Rep-Lite and good luck in your search! ***“Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Powered by JazzHR O0EfEgbL0H

Job DescriptionCompany Description Join SEAKR Engineering, a leading-edge provider of advanced electronics for space applications. Pushing the boundaries of technology on a mission to change the world for the better from space. Job Description The Supplier Quality Assurance Engineer (SQE) is responsible for ensuring that SEAKR’s supply chain is consistently able to provide high-quality, reliable components for aerospace applications. This person audits supplier quality management systems, performs source inspections, and tracks supplier performance. The SQE plays a critical role in SEAKR’s Supply Chain department, ensuring that flowed-down part requirements are properly executed and resolving supplier quality issues. The SQE reports to the Manager of Supplier Quality. IN THIS POSITION YOU WILL • Support procurement, program management, manufacturing, and engineering with all supplier quality related activities., • Perform quality system evaluations of new and ongoing suppliers., • Perform supplier surveillance during fabrication of flight articles to assure compliance with requirements., • Draft and maintain electronic records of supplier surveillance and evaluation reports in Enterprise Resource Planning (ERP) system., • Create/maintain supplier approval rating and records, including survey records and Quality Management Systems (QMS) certifications, in ERP system., • Perform a review and approval of purchase orders of flight hardware., • Identify and mitigate supplier-born risks., • Analyze supplier defect trends and lead continuous improvement projects., • Support Receiving Inspection with non-conformance evaluations and Material Review Board (MRB) dispositions., • Communicate non-conformances to supplier and request, track, and help implement corrective/preventive action where necessary., • Work with procurement to vet and onboard new suppliers.Qualifications REQUIRED SKILLS, EXPERIENCE & QUALITIES • Bachelor’s degree in a technical field, • 5+ Years of experience in product assurance and quality systems, including exposure to ISO9001/AS9100., • Able to travel (15% typical, up to 40% of time per month) to perform supplier surveys, audits, assessments, and inspections., • Industry experience with assemblies, manufacturing and/or printed circuit boards assembly (PCBA (IPC-A-610,J-STD)., • Strong communication skills to interface effectively with internal customers and external suppliers on quality and quality control issues., • Technical aptitude with strong analytical problem solving skills., • Ability to read and interpret engineering documentation such as drawing dimensions and mechanical/electronic inspection methods/reports, • Ability to successfully operate as part of a multi-functional team, including engineering, program management, supply chain, and manufacturing., • Ability to accept direction from immediate manager as well as company officers., • Background in performing root cause analysis (5 Whys, 8D, Fishbone, Pareto, FMEA), and identifying solutions to complex problems., • Exhibits a professional demeanor at all times; grounded and professionally confident, • Knowledge of quality systems and supply chain quality functions and documentation., • Effective time management and skillfulness at task prioritization., • Experience improving supplier performance through metrics., • Quality Engineer Certification (CQE) from American Society for Quality (ASQ)., • Experience leading process improvement projects with Agile, Six Sigma, Lean, Scrum or equivalent., • Certification/training in Geometric Dimensioning and Tolerancing (GD&T)., • Familiarity and experience with AS9102 First Article Inspection requirements., • Certification/training to requirements for electronic assemblies such as J-STD-001, IPC-HDBK-001, Nasa Workmanship (NASA_STD-8739.6), IPC-A-600, IPC-A-610, IPC-6012 or similar., • Proficiency with Enterprise Resource Planning (ERP) system Additional Information Compensation: Base salary range is $90,000-130,000 , depending on qualifications. SEAKR has very rich medical, dental and vision insurance plans, along with a generous 401(k) retirement plan. In addition to base salary, employees are eligible for a year-end bonus. SEAKR offers a variety of paid leave, such as vacation, sick, bereavement, and FMLA. SEAKR is an Equal Opportunity Employer - All your information will be kept confidential according to EEO guidelines. US Citizenship Required Applications will be accepted until 5/22/26.

Job DescriptionBear Event Design is a creative event design and décor firm serving events across Denver and the Rocky Mountain region. Our work spans corporate events, experiential activations, weddings, social celebrations, and custom environments where high-impact design depends on thoughtful, hands-on execution. We are seeking a skilled, versatile, and highly capable Fabricator to bring our clients’ custom event elements to life. This is one of Bear’s most hands-on roles, responsible for turning creative concepts into physical builds that are beautiful, functional, durable, and ready for installation. This role works closely with our Design, Creative, Graphics, Floral, Warehouse, and Production teams. You will operate and maintain our CNC machine, manage post-processing and assembly of CNC-cut elements, and fabricate across a wide range of materials, finishes, and scenic production needs. This is primarily an in-shop role, with occasional on-site support for larger installs, strikes, or custom builds that require fabrication expertise. Your responsibilities: • Build custom sets, props, scenic elements, structural pieces, and event-specific fabrication projects from design through completion, • Translate creative direction, renderings, sketches, and production notes into physical builds that are executable, durable, and aligned with the design intent, • Collaborate closely with Design, Creative, Graphics, Floral, and external suppliers to plan, build, paint, finish, and prepare custom elements for events, • Able to manage multiple projects at different stages, prioritizing deadlines, shifting needs, and production timelines without losing quality or momentum, • Fabricate using a wide range of materials, including wood, MDF, acrylic, foam, scenic materials, graphics substrates, hardware, and continue to research materials and techniques to improve our fabrication over time., • Operate CNC machine, including loading files, starting jobs, changing bits, monitoring cuts, maintaining the machine, and troubleshooting basic operational issues., • Lead and delegate tasks to Production Associates, helping maintain standards and ensure efficient completion of fabrication projects, • Continuously improve fabrication processes, shop organization, build quality, and team efficiency as Bear expands its custom production capabilities, • Maintain a clean, safe, organized, and productive fabrication area, following proper shop safety practices. Assist with material planning, purchasing needs, and shop readiness for upcoming builds, • Hands-on, resourceful, and comfortable building real things in a fast-moving creative production environment, • Able to look at a creative vision and understand how to make it physically work, • Highly skilled with tools, materials, fabrication methods, finishing techniques, and practical problem-solving, • Proactive, adaptable problem solver who identifies issues early and develops solutions, with the ability to move quickly between materials, project types, finishes, and deadlines, • Steady under pressure with a strong sense of urgency, especially when event deadlines are approaching. Can be proud of the details, but realistic about timelines, materials, and what it takes to get the job done, • Comfortable leading a small team, giving direction, and maintaining quality standards without overcomplicating the process, • 4+ years of hands-on fabrication, scenic production, wood shop, set building, prop building, event production, or related experience, • Experience operating CNC equipment, including loading files, running jobs, changing bits, monitoring production, and maintaining the machine (CAD/CAM experience a plus), • Experience working with a wide range of materials and build types, including scenic, structural, decorative, and event-specific fabrication, • Strong working knowledge of shop tools, fabrication equipment, materials, hardware, adhesives, finishes, and safe work practices, • Ability to read and interpret renderings, sketches, basic plans, measurements, production notes, and installation requirements, • Computer literacy and comfort using project management tools, digital files, email, and internal communication systems Our team operates at the pace of a production company with the mindset of a design studio - creating custom, elevated experiences across a high volume of events each year. We take pride in our collaborative culture, high standards, and commitment to delivering exceptional work. • Creative, collaborative team focused on high‑impact work in the event space., • Competitive compensation with Medical, Dental, & Vision Health Plans, • HSA with Annual Employer Contribution, • 401K with Employer Match, • Short Term Disability, Long Term Disability, and Life Insurance MEEja1A8M9

Job Description Summary Microsel of Colorado, LLC d/b/a/ TrinWare is a successful custom computer manufacturer based in Centennial, Colorado. We are looking for a Computer Configuration Technician to join our team. TrinWare provides custom computer systems to OEM’s, manufacturers, software solution providers, and vertical market companies that provide turn-key computer solutions. Sales to VAR’s, resellers, and corporations in the customized computing and solutions space is also a large part of our company business model. Hardware platforms range from multiprocessor servers to small form factor solutions running a variety of operating systems and applications. The Technical Production and Configuration Technician is responsible for the efficient, accurate, detailed, and timely configuration of computer systems, servers, notebooks, and other computing solutions as required by the sales operation. This includes expertise and experience in the configuration and assembly of computer systems involving both hardware assembly and software installation. In addition, 1-2 years of experience with the creation and deployment of Microsoft software utilizing Microsoft DISM, WDS, Acronis, and/or related imaging tools. Our environment is fast-paced with a high volume of production, requiring a technician who can assure accuracy in all aspects of the department and processes. The ideal candidate will have a minimum of 1 year of successful experience in the assembly, configuration, and computer system manufacturing industry. Detailed knowledge of Microsoft, Linux (preferably Ubuntu, Red Hat, or related) and other operating systems in a production environment is also preferred. The Technical Production and Configuration Technician is also required to possess a high level of knowledge regarding software implementation, functionality, and troubleshooting. Ideal candidate may have previously worked in computer production and assembly - computer technician - computer repair - information technology - it technician - computer technician - computer assembly - computer repair - manufacturing - pc technician. This position also involves direct customer contact offering technical support via phone, in person, and on-site with our customers. Providing an excellent customer experience and a high level of customer interaction is a contributing factor to our team’s success. In addition, active assembly, configuration, and repair of both warranty and non-warranty products is required. The standards established for handling customer repairs (both in and out of warranty) directly impacts the customer experience level provided to our partners and clients. Technical Production and Configuration Technician Qualifications • 1+ years of successful experience in the assembly and configuration of computer systems preferably in a fast-paced environment, • CompTIA A+ certification (preferred), • Ability to operate in a fast-paced computer configuration environment, while still maintaining a positive attitude and meticulous accuracy, • Detailed knowledge of computer hardware and components including server and workstation hardware, • Experience with Microsoft, Linux, and other related software packages, • 1-2 years of experience in the configuration of computer hardware & software in a fast paced, production, and manufacturing environment, • 1-2 years of experience configuring and/or repairing computer hardware solutions, • 1-2 years of experience imaging Windows and other Operating Systems over a LAN, • Experience with other related imaging tools such as CloneZilla/Acronis/etc (preferred), • Lift up to 50 lbs. and work on your feet for 8-10 hour per day, • Positive and Energetic Attitude, • Team Player, • Accurate, efficient, and timely configuration of computers, servers, notebooks, and related products as required by the operation, • Interact positively and professionally interdepartmentally, • Achieve company goals regarding productivity levels and profitability, • Technical support to customers and customer service skills required, • Continued desire to achieve expertise and remain current in the computer hardware-based industry, • Troubleshoot and perform higher level technical tasks, • Prepare, stage, and serialize upcoming production orders, • Testing and repair of products and systems via the RMA process, • The Technical Production and Configuration Technician will report to the Technical Production Manager Hours • The Production Tech will work 40+ hours per week. Hours to be determined and may fluctuate with operations Salary • This is a full-time position. 401K plan, medical, life and PTO (Paid Time Off) are part of the compensation package. Typical hours are 8:30 AM to 5:30 PM Monday thru Friday. Additional hours may be necessary as required by the operation. Employee Benefits Employer sponsored Medical, Dental, Vision, Life & Disability Insurances • Employer sponsored 401K with matching, • Employee discount program, • Employee assistance program

Job DescriptionCompany Description BEUMER has operated in the North American market for more than 40 years and has completed over 160 airport baggage handling projects; with fully integrated design and manufacturing systems in the United States. We are a family owned intra-logistics leader where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility The Project Mechanical Engineer is a hands-on individual who will prepare specifications, 3D models and drawings for the design, manufacturing, and installation of material handling equipment used in airport baggage handling systems. This position requires good technical, organizational and communication. An ideal candidate will have previous education in mechanical designs broadened by experience in the material handling industry. The Engineer will work closely with other Mechanical Engineers, Sales, Project Management, and Procurement. This position will report to the BEUMER Group Office in Greenwood Village, CO. Responsibilities • Provide drafting and design expertise to assist Engineers of the Mechanical Engineering department for the creation of 3D models and production equipment., • Assist Sales in the creation of equipment proposals by providing engineering and design expertise., • Evaluate manufacturing feasibility, estimate cost requirements of a variety of material handling systems., • Design systems layout and specific components on 2D and 3D CAD equipment and software Our products could include steel structures, sheet metal parts, mechanisms and other BEUMER products. Optimize for cost, functionality and manufacturability., • Perform data entry functions to fully document engineering designs in the corporate database., • Support existing Engineering processes and assist in the development of new processes., • Prepare specifications for equipment purchase. Work with procurement to release equipment for quotation and procurement., • Prepare written specifications for training and operation., • Work with senior engineers to insure designs are prepared for manufacturing and assembly. Compensation Range: $70,000.00 - $90,000.00 Annually. The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Requirements/Skills and Abilities • Bachelor’s degree in Mechanical Engineering or a related field; equivalent experience will also be considered., • 2 to 4 years of hands-on experience in manufacturing and project engineering environments., • Preferred experience in the design of automated machinery and material handling capital equipment, • Broad technical background across machine technologies, including controls and electrical systems (preferred), • Proficient in Autodesk AutoCAD; experience with Revit is a plus., • Strong technical writing skills, with the ability to create clear and concise documentation., • Skilled in analyzing and designing basic mechanical components and systems., • Ability to specify mechanical components and materials accurately., • Solid understanding of drafting standards, dimensioning, tolerancing, and common manufacturing processes., • Experience within Material Handling Industry preferred., • Strong time management skills, attention to detail., • Excellent verbal and written communication skills., • Professional, positive, and energetic attitude., • Willingness and ability to travel to project sites up to 20% of the time. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionSalary: $115,000 - $125,000 We are looking for an experienced Associate Director, Business Development to join our team! The Associate Director (AD) of Business Development (BD) is a key leader at CPC and works in partnership with the Executive Director (ED) to build and strengthen relationships with partners and to proactively develop relationships and strategies to support and resource scientific activities aligned with CPCs Mission, Vision, and Values. The AD internally drives proposal generation, updates internal teams on new opportunities, transitions funded projects to operational teams, stays current on study progress, leads discussions with partners on upcoming changes, and communicates strategy to the internal organizational teams. In this position you will: • Lead strategy for CPC business development with direction from the Executive Director and organizational leadership, • Oversee CPC business development activities., • Serve as a primary contact and driver of new proposals and bids., • Assess the needs of potential customers and develop proposed solutions with the applicable CPC leadership., • Present CPC capabilities to potential partners & funders. Partner interactions will span the full project life cycle including relationship initiation, proposal preparation and presentation, transition from proposal to contracting, project kickoff and transition to internal teams, project status updates to the partner and change management, and project closure., • Provide a project plan and tasks along with timelines for each proposal and manage the respective CPC groups accountable for content to deliver proposals on time., • Manage the proposal composition working with the ED, Chief Science Officer, and Heads of Operations as well as other subject matter experts on content and format., • Develop and maintain positive business relationships with current and new customers; establish regular communication with current clients to provide ongoing updates on project spend, anticipated changes, etc., • Create the project budget first draft by using the provided tools and entering the assumptions and tailoring for the project; review the assumptions with the CPC content experts and overall budget with the Chief Financial Officer for final approval before submission., • Plan and coordinate all capabilities, bid defense, business development, and partnership meetings including onsite and remote. This includes agenda creation, content assembly, and coordination with the CPC meeting planning team., • Work with the Contracts team on contract negotiations (including change orders and amendments), as necessary; ensure the scopes of work accurately align with the approved budgets, • Serve as primary point of contact for the internal CPC teams to address questions about contracted scope, budget amendments, budgeted task inclusions, change orders, amendments, etc., • Work with Legal to organize materials in the correct drives, data entry in CPCs CRM and associated systems., • Lead process improvement for business development and creation/maintenance of standardized pitch decks and materials including interval updates., • Manage public relations press releases, social media related to notable CPC activities and website content., • Monitor the CPC email account for new opportunities., • Monitor external news and opportunities and bring them to the CPC team for consideration of bid activities., • Understand and comply with all relevant CPC Policies, Standard Operating Procedures (SOPs) and guidelines., • Establish and execute strategic business objectives and goals for CPC in conjunction with applicable CPC leadership (e.g., the Leadership Committee)., • Assist with and/or submit grant submissions., • Facilitate meetings with external partners at CPC with support of other internal teams., • Perform other duties as deemed necessary. Heres what you will need to bring to the table: • Passion for improving health care and developing innovative proposals for research to expand scientific knowledge., • BA/BS or higher-level degree in a scientific field preferred., • Minimum of 5 years of experience in a clinical research or equivalent setting., • Track record of facilitating successful research proposals to funding is optimal., • Operational knowledge of clinical trial execution is strongly favored in the context of discussing proposals and budgets., • Experience in clinical research and ideally, operational knowledge of clinical research specifically clinical trial delivery., • Excellent interpersonal communication skills and comfort leading discussions and meetings ranging from high-level partnership strategy to specific detailed review of project proposals and project status updates., • Ability to present in detail project proposals in terms of operational metrics as well as budget and milestones., • Strong computer skills (MS Project, PowerPoint, Word, Excel, Outlook and Access)., • High level of proficiency in scheduling and conducting in person and virtual meetings, use of budgeting tools, and ability to learn and adapt to new technologies as needed to facilitate work., • Excellent organizational skills and great attention to detail., • Ability to work as a member of a team and interact with individuals at different levels of the organization., • Ability to manage conflicts and resolve problems effectively., • Ability and willingness to occasionally travel. Targeted Compensation: $115,000 - $125,000 annually Deadline to Apply: May 1, 2026 About CPC: CPC is an academic research organization that offers full service clinical trial design, oversight, and management with rapid access to Key Opinion Leaders in a variety of therapeutic areas.With over 35 years of experience, CPC has provided services to over 150 clinical trials in a variety of indications, with an emphasis on cardiovascular, wound healing, diabetes and more. CPC has expertise in managing clinical trials from a variety of funding sources including industry, NIH, and Investigator Initiated trials. CPC Community Health focuses on innovative programs that reach into communities to help people find effective ways to become active, empowered and healthy. CPC offers: Comprehensive benefits package (medical, dental, vision, life, STD, LTD etc.) Matching 401(k) plan (dollar for dollar up to 4% of your eligible compensation, fully vested immediately) 11 paid holidays 15 - 25 vacation days based on years of service Paid sick time (2.67 hours accrued bi-weekly up to a maximum of 80 hours) Monthly fun events (e.g. team building activities, games, charitable events, potlucks, picnics) Flexible and remote work schedules An Equal Opportunity Employer CPC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race (including traits historically associated with race, such as hair texture and length, protective hairstyles), sex, color, ancestry, sexual orientation, gender identity, gender expression, marital status, religion, creed, national origin, disability, military status, genetic information, age 40 and over or any other status protected by applicable federal, state or local law. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act (ADA) and certain state or local laws. If you need assistance, please email our Human Resources team at .

Job Description About Denver Rubber Company Denver Rubber Company (DRC) is a family-owned, second-generation custom manufacturer operating since 1972, specializing in custom rubber, foam, elastomeric, gasket, and hose assembly solutions for industrial and OEM clients. DRC operates a 35,000 sq. ft. state-of-the-art manufacturing facility and is ISO 9001:2015 certified, supporting industries including pharmaceutical, government, military, medical, transportation, electronics, and more. As a leader in custom and specialty fabricated parts, DRC provides quick-turn engineered solutions and maintains a large inventory of raw materials to support both prototype and large-scale production needs. Position Overview DRC is seeking a driven and relationship-focused Sales Representative to join our team. This role is ideal for someone experienced in industrial products, manufacturing, or engineered components, who excels at solution selling and building long-term customer partnerships. You will be responsible for expanding OEM, industrial, and commercial accounts, developing new business in target sectors, and supporting customers from concept through production. Key Responsibilities Business Development & Sales • Identify, Prospect, and secure new customers in target markets., • Promote DRC's comprehensive range of custom gaskets, seals, hose assemblies, foam products, elastomeric sheet goods, die-cut parts, waterjet and CNC knife-table cut solutions, and more., • Develop a strong understanding of customer requirements to recommend optimal materials, manufacturing processes, and solutions., • Maintain ongoing customer relationships, ensuring high satisfaction and retention., • Maintain accurate CRM records for opportunities, leads, and pipeline activity., • Provide regular forecasts and strategic feedback to leadership. Required Qualifications • Over 3 years of sales experience in industrial products, manufacturing, engineered components, or related fields., • Strong technical aptitude; ability to understand materials, tolerances, and manufacturing processes., • Excellent communication and relationship-building abilities., • Proven track record of meeting or exceeding revenue goals., • Experience with CRM systems such as NetSuite or Salesforce., • Familiarity with ISO-certified production environments.

Job Description Responsibilities A Diesel Technician is responsible for providing service to our customers while maintaining exceptional customer service. This can include: maintenance, visual inspection, and removal of parts and attachments. Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning. Rush Truck Leasing opens the door to the world of opportunity. We are the premier commercial transportation solutions provider for businesses across North America. Our network of Idealease and PacLease partners allow us to offer our customers complete truck leasing and rental solutions across our network of dealerships. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier. This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job DescriptionDescription: Intermountain Electronics (IE) is a leading provider and manufacturer of custom engineered Process, Electrical Control and Power Distribution turn-key solutions to the Data Center, Industrial, Power/Utility, Oil & Gas, Mining industries in North America. Our products range from large scale one-off custom Power Distribution, Control and Process systems to standard off-the-shelf electronic/electro-mechanical components. Reporting directly to the Quality Supervisor we are currently seeking a Quality Inspector for our Night Shift to be based at our Denver facility. Why you will love working at IE You will love the challenge, interesting and varied work, and endless opportunities, but most importantly you will love working with a team of fun loving, driven, and generous go getters that take deep personal pride in being part of a family that is building the infrastructure that powers the world. Job Description Job Title: Quality Inspector Job Status: FULL TIME Benefits: Competitive salary PTO (Paid Time Off) Paid Holidays (10) Medical and Dental Plans Teladoc 24/7/365 Access to U.S. Board Certified doctors Employee Assistance Program Company Paid Life Insurance Supplemental Vision, Life, STD & LTD Insurance 401K- Company match up to 6% of base salary. Health Savings Account (HSA) with available company match up to $2000 based on family size. Paid Parental Leave Position Summary: Responsible for inspecting work in progress and finished products; maintain accurate records to comply with Company and customer documentation requirements; conduct root cause analysis on NCR’s and customer escapes while implementing any required corrective actions; help define process improvement opportunities. Other duties such as process development may be required. Work Schedule: Monday- Thursday, 3pm- 1:30am Essential Functions - Other Duties May Be Assigned Quality • Inspect and support electrical reviews on wide variety of equipment and products, i.e. MCC buildings, E-houses, power centers, LACT units, pump stations, re-build equipment, etc., • Interpret and work from technical assembly prints to wire and install electrical components, switch gears, electrical switches and electronic instruments and devices, such as programmable process controllers (PLCs), data loggers, relays, breakers and other electronic instrumentation equipment used in the manufacture and repair of electrical power stations and equipment to determine quality and reliability standards are met, • Ensure all equipment has been properly calibrated and meets electrical code/design specifications, • Perform in process inspections throughout entire production process & conduct visual and measurement tests, • Conduct final inspection of finished product(s) to confirm all operations have been completed to IE /customer specification, • Communicate changes to quality process/procedures with Manufacturing Manager and team leads., • Assist in the collection of process turn backs; lead effort in determining analysis of root causes and implement corrective actions., • Work closely with the manufacturing and engineering team to ensure all documentation is completed, • Assist QMS team, engineers, manufacturing supervisors, leads and employees on workmanship and quality standards, manufacturing processes and procedures. Train new employees on quality process and inspection procedures., • Work closely with the quality team to identify manufacturing process improvement opportunities. Lead the effort to conduct root cause analysis on all company escapes (quality issues that made it to the end user), • Utilize the latest NEC code requirements at an advanced level and provide instruction, explanations and guidance to other team members. Also ensuring the project meets all NEC requirements throughout the build., • Effectively communicate technical information both verbally and in writing with assemblers, peers, engineers, supervisors and suppliers as needed., • Support the Quality Management System (QMS) in accordance with ISO 9001:2015 standards including the Non-Conforming Material Program. Demonstrates a positive attitude and contributes to the success of the company in a team environment, • Demonstrates initiative and keeps organized & busy throughout the workday which could include supporting engineering or operations with additional tasks. Enrolls others to continuously improve through positive example and positive motivation., • Communicate any changes to quality process/procedures with Manufacturing Manager and team leads. Assist in the collection of process turn backs, analysis of root causes, and implementation of corrective actions., • Lead the effort in determining root cause and corrective actions for all related NCR quality issues. Assist QMS team, engineers, manufacturing supervisors, leads and employees on workmanship and quality standards, manufacturing processes and procedures. Maybe required to perform additional operational inspections in fabrication, mechanical assembly, and paint., • Maintains regular and consistent job attendance, comes to work on time. Follows and complies with IE Core Values, • HS diploma or GED plus three years of relevant industrial/commercial electrical experience plus two years quality control/inspection experience, • Working knowledge of three phase power systems, motor controls, drives, low voltage controls, PLC’s, • Working knowledge/use of electrical test equipment, e.g. multimeter, Volt-Ohm meters, Hi-pot, calipers, • Must be able to work safely and adhere to all electrical safety procedures, e.g. OSHA, MSHA, • Must have working knowledge of applicable electrical codes: e.g. NEC, MSHA, • Ability to read, understand and follow electrical diagrams and prints, • Must be very observant and detail oriented; ability to read prints and diagrams, • Strong troubleshooting & problem-solving skills, • Ability to work effectively with employees within all levels of the company, • Ability to establish positive customer relations, • Must have general PC skills including email, internet, data entry and Microsoft Excel, • Must be able to safely use a variety of hand tools, overhead cranes, forklift, hoists, etc., • The employee must occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this job include Close vision, Peripheral vision, Color Vision, Depth perception and Ability to adjust focus., • While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance and talk or hear., • The employee is frequently required to walk, stand, stoop, kneel, crouch, or crawl., • Must be able to perform some lifting and continual bending and standing on a concrete floor. Work Schedule: Must be able to work a 40-hour work week and additional hours as required. Disclaimer: Although Intermountain Electronics has attempted to accurately and thoroughly describe this position, the Company reserves the right to change the same, including, add to or subtract from the duties outlined, within the sole discretion of the Company, at any time, with or without advance notice. Intermountain Electronics, Inc. is an Equal Opportunity Employer

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off ARES Scientific| Accelerating medical breakthroughs with innovative solutions Some engineers design systems. Others install and maintain them. This role does both while helping build an entire service organization from the ground up. At ARES Scientific, we partner with leading hospitals, universities, and research institutions to design and deploy the laboratory infrastructure that powers modern science. From high-performance cold storage systems and laboratory washers to pathology equipment and automation platforms, we help create the environments where discovery happens. Every installation we complete supports scientists and clinicians working on the next generation of medical breakthroughs. As ARES continues to grow, we are launching a Field Service Department to support the sophisticated systems we install across research and clinical environments. Were looking for a Field Service Engineer who enjoys solving technical problems in the real world someone who thrives in the field, works well with their hands, and wants to help build the standards and systems of a new service organization. This is not a ticket-driven service role. This is a builder role. The Team Youll Join While ARES Scientific is launching a new Field Service Department, you wont be starting from scratch. Youll work alongside a senior Service Technician who has been with the organization for over 15 years as well as a Director of CX who has been leading technical installations for the same amount of time, bringing deep experience with laboratory environments, equipment logistics, and customer relationships. Together, youll combine institutional knowledge with new engineering capabilities to help build a modern service organization that supports leading research and clinical facilities around the world. What Youll Do Lead Equipment Installations • Lead installations of Optimice systems and laboratory infrastructure, • Perform mechanical assembly, system alignment, and installation verification, • Coordinate installation logistics with customer facilities teams, • Conduct system commissioning and client walkthroughsTechnical Site Assessments, • Perform site evaluations and layout verification, • Review facility drawings and installation plans, • Coordinate with contractors, facilities teams, and project managersClient Training & Support, • Provide post-installation training and operational walkthroughs, • Support clients during equipment startup and integration, • Ensure installations meet ARES quality and safety standardsHelp Build the Service Organization, • Contribute to developing ARES Scientifics service capabilities, • Help establish service standards, documentation, and installation protocols, • Support expansion into servicing:, • Mopec pathology equipment, • Steelco washers and sterilization equipment, • Visron automation systems, • Field Operations, • Travel to customer sites for installations and service visits, • Maintain installation tools and service equipment Required • Bachelors degree in Mechanical Engineering, Biomedical Engineering, Electrical Engineering, or a related technical field (or equivalent experience), • 3+ years of experience in field service, equipment installation, or technical engineering roles, • Strong mechanical aptitude and hands-on technical skills, • Ability to read technical drawings, layouts, and installation plans, • Strong problem-solving and troubleshooting ability Experience working with: • Laboratory or medical equipment installations, • Sterilization equipment or washers, • Laboratory automation systems, • Pathology equipment, • Biomedical or research environments, • Travel required for installations and service work, • Help build ARES Scientifics service organization from the ground up, • Work directly with top hospitals, universities, and research institutions, • Install advanced laboratory and medical equipment, • Combine hands-on engineering with real-world problem solving ARES Scientific provides innovative laboratory infrastructure solutions that support cutting-edge medical research and clinical work. Our systems are used by leading institutions around the world to improve laboratory performance, reliability, and efficiency. By helping laboratories operate at their best, we play a small but important role in accelerating the scientific discoveries that improve human health. If youre energized by solving real-world engineering challenges and helping build something meaningful, wed love to hear from you. The First 12 Months in This Role First 90 Days • Learn ARES Scientifics equipment portfolio and installation procedures, • Support installations and begin participating in field deployments, • Work closely with the senior service technician to understand operational workflows, • Assist with site assessments and installation preparationMonths 36, • Begin leading Optimice rack installations, • Conduct client walkthroughs and operational training, • Support installation planning and project coordination, • Help improve installation procedures and documentationMonths 612, • Become a primary technical lead for installations, • Help expand ARES service capabilities across additional equipment platforms, • Contribute to building the foundation of ARES Scientifics service departmentBy the end of your first year, you will have helped establish the operational foundation of a growing service organization supporting laboratories around the world. A Day in the Life No two days look exactly the same, but a typical week might include: Monday Installation Planning • Review project layouts and site drawings for an upcoming laboratory installation, • Coordinate logistics with the customers facilities team, • Prepare installation tools, equipment, and materialsTuesdayWednesday On-Site Installation, • Travel to a hospital or research facility, • Lead the installation of an Optimice storage system or laboratory infrastructure, • Perform mechanical assembly, alignment, and system verification, • Work directly with lab managers, facilities teams, and contractorsThursday Commissioning & Client Training, • Complete system checks and commissioning, • Conduct a client walkthrough and operational training, • Ensure the system is fully operational and ready for laboratory useFriday Service Development, • Document installation insights and improvements, • Help refine ARES installation procedures and service protocols, • Coordinate upcoming installations and future service opportunitiesSome weeks will involve travel to new research facilities all over the world, problem-solving unexpected challenges in the field, or learning new equipment platforms. Other weeks may focus on planning, training, and improving service processes as ARES Scientifics service department continues to grow. Compensation Base Salary - $80k - $120k Annual Performance Bonus 5 10% of salary o Service revenue growth o Customer satisfaction o Installation efficiency Travel Compensation o Hotels Marriott properties paid by the company. Points held by the employee. o Flights Company paid. Points held by the employee. o Mileage IRS Rate (~0.67 mile) Tools and Equipment Package o $4k - $8k budget Sales Finders Fee Variable o Finders Fee for sales assistance on site. Health Insurance o HSA insurance plan. 70% covered by employer for employee portion. 50% paid for spouse and dependent Retirement o Safe Harbor 401k match offered Disability o Short and long-term paid by the company Retention Bonus o Founding Service team members receive a $10k retention bonus after 3-years. Flexible work from home options available.

Job DescriptionCompany Description Join SEAKR Engineering, a leading-edge provider of advanced electronics for space applications. Pushing the boundaries of technology on a mission to change the world for the better from space. Job Description The Production Test Technician Supervisor will lead a team of hourly employees spread across four different shifts for a lab that runs 24/7. The supervisor is responsible for the day by day management of the Production Test Technicians (PTT). The supervisor will also be responsible for leading and driving continuous improvement in all aspects of technician responsibilities whether that is process improvement, tooling, training or physical location of test assets. This is a full-time exempt position in which the work is performed under limited supervision by the Director, Manufacturing and Production Test and is evaluated on results obtained. Onsite, Shift: Approximately 11:30AM – 8PM 5 days a week, OR 11:30AM – 9 PM for 9/80 RESPONSIBILITIES: • Manage and direct the activities of Production Test Technicians including, • Daily priorities and goals, • Ensure program needs are being met through the smoke watch system., • Provide clear pass-down communication between shifts, • Coordinate Quality Support, • Resolution of in-process anomalies, • Technical guidance and on-going training regarding all production test activities, • Process guidance and on-going training regarding test procedure interpterion, and IFS data entry, and production flow., • Manage technicians by assessing employee performance through meetings and performance reviews, providing positive/constructive feedback, facilitating conflict resolution, and addressing repeat issues with corrective actions, performance improvement plans, or through HR disciplinary actions., • Monitor and approve employee timecards, • Perform technician tasks independently following all Production Test processes as required by workload or labor deficiencies., • Keep up to date on all preventative maintenance tasks within the Environmental lab. Coordinate with Test Engineering for items requiring calibration., • Provide and/or coordinate training for technician team filling gaps in knowledge., • Define staffing and equipment requirements to support company goals and commitments., • Establish and analyze area metrics to drive:, • Optimization of product flow through the Environmental lab, • Efficiency improvement projects, • Identification and elimination of defects within test process, • Reduction of downtime for product and personnelQualifications BASIC QUALIFICATIONS: • Bachelor's degree or 5+ years of professional experience in a manufacturing/production environment, • 1+ years of experience leading a team or project, • 5 years of experience in a production test environment, • Experience with Microsoft Office; Able to plot data in excel., • Experience effectively communicating (verbal and written) with both production and engineering teams, • Experience building, leading and consistently maintaining cohesive teams, • Organized and self-driven, capable of working independently with little direction in a fast-paced/cross-functional environment, • Experience within an aerospace environment, • Experience with Thermal Cycle Chambers, Thermal Vacuum Chambers, Vibration Table, Shock Table., • Demonstrable hands-on skill in fault finding, problem resolution, • Familiarity with BOM or ERP management tools, work order and assembly traveler management tools, data analysis in spreadsheets, and extraction and documentation of test data from lab test equipment., • Available to work extended hours and weekends as needed, • Respond to phone calls for assistance in off hours, • Must be able to lift up to 40 lbs. unassisted, • Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position Additional Information Compensation: Base pay range is $75,000-95,000 depending on qualifications. SEAKR has very rich medical, dental and vision insurance plans, along with a generous 401(k) retirement plan. In addition to base salary, employees are eligible for a year-end bonus. SEAKR offers a variety of paid leave, such as vacation, sick, bereavement, and FMLA. SEAKR is an Equal Opportunity Employer - All your information will be kept confidential according to EEO guidelines. US Citizenship Required Applications will be accepted until 5/22/26.

Job Description Hazen and Sawyer is seeking a process mechanical CAD/BIM Designer based in Denver to work alongside staff Engineers and Senior CAD Designers, in the design and production of contract documents for various Water, Wastewater, Pump Station, and Pipeline projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK.Key Responsibilities:, • Prepare site plans, plans, sections, and details for water, wastewater and stormwater facilities., • Coordinate with other disciplines (Site Civil, Structural, Architectural, HVAC, Electrical, and I&C) to help resolve design conflicts and challenges., • Ensure drawings comply with company and client CAD/BIM standards and styles, • Create BIM models, Revit families, and CAD based files for use in the production of contract documents., • Revit knowledge and skills required, • Some 2D AutoCAD MEP skills desired, • Completion of technical school CAD design certificate with emphasis on Revit or Engineering Technology Associate’s degree, • Some design experience with water and/or wastewater projects desired, • Basic understanding of process and chemical piping materials and fittings helpful, • Hardworking, focused, and willingness to learn is important What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Summit Interconnect is the premier electronics manufacturer in the US, located in Aurora, Colorado. Specializing in printed circuit board assembly, we build the latest electronic circuitry designs from leading technology companies in every sector, from aerospace to cutting-edge medical devices. We are known for our speed and high quality in our work. It’s a fun place to work. We are continuously innovating our processes and systems to stay on the cutting edge of software technology. Our vision is to have the best employees working to provide an outstanding service experience, and the coolest technology solutions for our customers. We look forward to you joining the team! Position Summary Works independently under the direction of the Senior Director of Operations to schedule and coordinate flow of work between Summit Interconnect and vendors/suppliers to maximize utilization of production resources, quality, and on time shipping. Duties include ensuring jobs are prioritized to meet production and shipping schedules, maintaining files, reports and spreadsheets, conferring with vendors/suppliers to determine prioritization, progress of work and completion dates. Knowledge, Skill Sets, Education, Experience What you’ll need: • High School diploma or equivalent, • Excellent verbal and written communication skills., • Expert with Excel including macro generation., • Proficient with Office products including Word, Power Point and SharePoint., • Excellent organizational skills., • Ability to work cross functionally and at all levels within the organizations., • Ability to collaborate to achieve project goals., • Ability to plan both in the short-term as well as the long-term., • Ability to internalize the company’s goals and work towards the realization of the company’s vision., • Ability to work independently with limited on-site supervision. Desired: • Knowledge of SAP Business One, • At least one year of experience in the planning field or related area., • Experience with manufacturing processes, • Familiarity or background involving Printed Circuit Boards Location: 20100 E 32nd Pkwy, 225 Aurora, CO 80011 Compensation: $22.00-$25.00/ hour DOE Plus shift differential Schedule: Monday-Friday 8L00am-5:00pm Competitive Benefits include: Medical Dental- Vision 401(k) plan Life Insurance Paid Time Off (PTO) Seven (7) paid holidays a year Pre-employment background and drug screening is performed. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Scope: The Assembly Manufacturing Manager will coordinate production schedules and all intercompany communication in regards to assembly production operations and select products as determined by the Assembly Manager's leadership. Provide customer service and administrative support for the programs. The position supports the development and execution of assembly production plans which meet all requirements, including customer specifications and internal standards and processes. This position may require customer interface as designated by the customer service group, managing upward/downward/laterally across the organization. The Assembly Manufacturing Manager ensures product quality and customer satisfaction are emphasized. Duties and Responsibilities: • Assures that production schedules reflect customer program needs for designated product lines and proactively assures that the production execution is per the plan. Participates in or leads project meetings and contract reviews, and tracks progress of day to day commitments. Identifies any issues with throughput or quality related to the monitored programs, raises the issues with the production team, and actively works to resolve the issues in a timely fashion to minimize late deliveries., • Provides direction and leadership for immediate subordinates in the management of their assigned areas to ensure that their responsibilities for attaining objectives and satisfactory performance are met consistent with established policies and programs., • Develops and maintains an effective operations organization through the selection, training, development, compensation and motivation of all personnel assigned to the operations organization. Recommends and approves organizational structures and staffing requirements in support of company business objectives., • Responsible for communicating with customer to reporting order status including plans and delivery forecasts., • Evaluates material availability for new orders. Monitors progress on all program part numbers and reports any resource constraints., • Monitors the progress of various program orders against projected delivery dates and provides reports to General Manager on assigned product lines. Provides regularly updated cost inputs for use in pricing models as required., • Develops detailed project plans which meet the required customer and/or internal milestones, specifications, and product cost goals, within project budget and staff assignments., • Supports or maintains project plans regularly and reports to management on progress. When problems and issues arise, Program Manager participates in structured problem solving and root cause analysis, as well as the execution of appropriate corrective actions., • Assures process adherence with key process steps by all necessary means including auditing, process indicators, monitoring, and/or quality in-process observations. Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Knowledge and Skills: • Ability to effectively and accurately convey pertinent information verbally and in writing to project team and others in a professional, courteous manner., • Ability to handle internal negotiations for resources and priorities with positive results., • Capable for developing and executing effective plans; identifying obstacles and issues and communicating to get things resolved. Identifies barriers to meeting project timelines and involves appropriate resources to resolve issues., • Ability to juggle multiple tasks and make quality decisions without negative impact on others., • Effectively leads and develops others. Resolves or escalates issues in a timely manner; involves appropriate individuals., • Actively pursues opportunities to expand job-related knowledge., • Ability to understand operation and key performance parameters, as well as the processes and materials used to manufacture responsible products., • Maintain a positive, professional demeanor in fast-paced environment. Effectively work with project teams to achieve results., • Excellent organizational skills. Ability to enter data accurately into appropriate computer systems., • Excellent computer skills (working knowledge of Outlook, Excel, Word, and PowerPoint), • Knowledge of printed circuit board drawings and manufacturing. Education and Experience: Education Required Experience • 5+ years of experience. Previous assembly and PWB knowledge.Preferred Experience, • Previous management experience preferred., • Customer service, sales or administrative background preferred. Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $93,323 - $164,120 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Our promise to you: Joining AdventHealth is about being part of something bigger. It's about belonging to a community that believes in the wholeness of each person, and serves to uplift others in body, mind and spirit. AdventHealth is a place where you can thrive professionally, and grow spiritually, by Extending the Healing Ministry of Christ. Where you will be valued for who you are and the unique experiences you bring to our purpose-minded team. All while understanding that together we are even better. All the benefits and perks you need for you and your family: * Benefits from Day One: Medical, Dental, Vision Insurance, Life Insurance, Disability Insurance * Paid Time Off from Day One * 403-B Retirement Plan * 4 Weeks 100% Paid Parental Leave * Career Development * Whole Person Well-being Resources * Mental Health Resources and Support * Pet Benefits Schedule: Full time Shift: Day (United States of America) Address: 2525 S DOWNING ST City: DENVER State: Colorado Postal Code: 80210 Job Description: Anticipates the needs of the surgeon and keeps the circulating nurse informed throughout a procedure. Maintains high standards and quality in facilitating cost savings and containment. Assembles all necessary supplies, equipment, and medications prior to the procedure. Supports customer and employee satisfaction activities; maintains good relationships with physicians, management, other departments, and staff; and responds to complaints in a timely manner. Other duties as assigned. Monitors aseptic technique of the entire surgical team and takes immediate corrective action for any breaks in technique. Identifies and reports environmental concerns to management and ensures adherence to regulatory standards and policies. Supervises other healthcare team members in the surgical environment and assists with orientation, training, and education of new personnel. Promotes a safe environment and takes appropriate action in emergency situations, controlling hazards that may endanger patients, visitors, and employees. Follows CDC isolation guidelines, uses PPE appropriately, and performs hand washing according to policy, adhering to all infection control practices. Participates in practice changes resulting from performance improvement activities and supports departmental quality standards and initiatives. Provides assistance and support to members of the surgical team as needed. Assists the team with safe and efficient operating room turnover times and directs ancillary personnel during room turnover. Knowledge, Skills, and Abilities: * Ability to communicate by reading, writing legibly, speaking, and comprehending English effectively in order to carry out job requirements. [Required] * Basic skills related to aseptic/sterile technique and knowledge of surgical instrumentation. [Required] * Knowledge of commonly used concepts, practices, and procedures in the healthcare industry. [Required] * Up-to-date knowledge of surgical instruments and supplies to hand surgeons the correct tools during surgeries. [Required] * Up-to-date knowledge of regulatory requirements and laws at various jurisdictional levels. [Required] * Ability to understand and process surgeon dictated instructions and directions. [Required] * Basic computer skills and knowledge of Microsoft Office. [Required] * Ability to consistently demonstrate clear communication skills, strong anticipatory skills, and concentration to detail. [Required] * Assembly of mechanical devices and knowledge of fundamental human anatomy. [Required] * Must be able to work well with multiple team members. [Required] * Ability and willingness to work a flexible schedule and adapt to change. [Required] * Organizational skills, customer relations, verbal and interpersonal skills. [Required] * Proficiency in grammar/spelling, and the ability to read/comprehend written instructions and follow verbal instructions. [Required] * Keyboarding (manual) and computer (visual) skills. [Required] * Ability to multitask and possess excellent communication skills. [Required] Education: * Associate [Preferred] * High School Grad or Equiv [Required] * Technical/Vocational School [Preferred] Field of Study: 1+ years relevant experience [Preferred] * 2+ years of technical experience in the field [Preferred] Additional Information: Basic Life Support - CPR Cert (BLS) [Required] * State Certified Surgical Technologist (CST) [Required] OR NBSTSA Certified Surgical Technologist (CST) [Required] OR Technician in Surgery - Certified (NTSC) [Required] Physical Requirements: (Please click the link below to view work requirements) Physical Requirements - Pay Range: $24.45 - $45.46 This facility is an equal opportunity employer and complies with federal, state and local anti-discrimination laws, regulations and ordinances. Category: Surgery Services Organization: AdventHealth Porter Schedule: Full time Shift: Day Req ID: 151223763

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! We are collaborators, doers, and problem-solvers who are relentlessly committed to a culture of safety. This position will directly impact the history of space exploration and will require your commitment and detailed attention towards safe and repeatable space flight. Join us in lowering the cost of access to space and enabling Blue Origin's vision of millions of people living and working in space to benefit Earth. Multiple positions available across our Business Units. You will be matched with an appropriate engineering team based on your skillset and experience and our current business needs. Timeline: Applications will be reviewed on a rolling basis. Primary locations: We prioritize placing early career engineers in locations where they can be co-located with their team and the relevant hardware they support. The primary locations for this role are listed below. Please indicate in the application where you would be willing to be located. * Seattle, WA * Huntsville, AL * Cape Canaveral, FL * Denver, CO * Los Angeles, CA Responsibilities include but are not limited to: * Your projects may include many aspects of applied mechanical / structural engineering including design, analysis and test of mechanical systems, propulsion systems, and structures. The projects will include the integration of materials and processes, manufacturing, test, operations, and systems engineering. * Participate in the entire design cycle, including requirements derivation, conceptual and detailed design, system performance modeling, structural analysis, manufacturing and integration support, development testing and qualification. * Participate in the assembly and test of development and flight hardware including planning, execution, data reduction and analysis. * Assist in the identification and implementation of design changes to improve system reliability and reduce operational cost. * Specific duties are subject to our business unit objectives. Qualifications: * Minimum of a BS Degree in mechanical engineering or aerospace engineering, or other relevant engineering field. * Will have earned their degree within the last year and able to start by Fall 2026. * Basic understanding in the fundamentals of design (requirements identification, material selection, input definition, form factors, interface definition, environmental considerations, etc.) * Basic proficiency in 3D CAD programs (Creo Pro/E preferred) including drawing creation. * Basic proficiency in strength and mechanics of materials. * Basic proficiency in structural analysis including Free-body diagrams, hand calculations, etc. * Basic understanding of Finite Element Analysis (ANSYS preferred). * Relevant internship/co-op and/or hands-on experience that demonstrate development of both technical skills as well as leadership qualities. * Ability to earn trust, maintain positive and professional relationships, and strengthen our culture of inclusion. * Ability to work independently and as part of a team on rapid development programs. * Flexible and adaptable mindset. * Self-driven with the ability to seek out requirements with minimal direction. Desired: * MS degree in mechanical engineering or aerospace engineering, or other relevant engineering field. * Experience with flight control actuators, deployable devices (doors, landing gear, sensors, etc.), hydraulic system components, separation systems, or other mechanical systems. * Working knowledge of common aerospace materials, surface treatments, and fasteners. * Experience with GD&T (ASME Y14.5). * Hands-on experience with machining, building, and maintaining pressurized or mechanical systems. * Mechanical component testing experience. * Test instrumentation and data acquisition experience. * Basic understanding of the fundamentals of fatigue and damage tolerance. How to prepare: We are solving challenging, new problems and we need people to represent a wide variety of perspectives. Experience in aerospace is not a requirement. We value broad academic and industry experiences such as Tech, Oil & Gas, Nuclear, Automotive, and more. When you apply, include your internship, co-curricular and research experience in your resume. Please also include the relevant programming languages you have used in these settings. If you haven't yet used a tool in a professional setting, please include relevant coursework that demonstrates your preparation for these roles. Compensation Range for: CA applicants is $81,313.00 - $113,837.85 CO applicants is $74,537.00 - $104,351.10 WA applicants is $81,313.00 - $113,837.85 Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Stock Options for all regular employees (working at least 20 hours/week) * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of the Lunar Permanence business unit, which develops Blue Origin's Blue Moon landers and related products. To further Blue Origin's mission of millions of people living and working in space for the benefit of Earth, we are building sustainable infrastructure for our transport of crew and cargo from Earth to the lunar surface. You will work directly with NASA and our National Team Partners as part of the Human Landing System (HLS) Sustaining Lunar Development (SLD) program. You will play a key role in developing the Lunar Transportation system that will return humans to the Moon and extend human presence permanently beyond the bounds of Earth. We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight. Passion for our mission and vision is required! Responsibilities include but are not limited to: • Develop Communication system design for one or more in-space architectures., • Allocate and decompose higher level functions and requirements to the Communications Subsystems., • Support the alignment, documentation, and consistent implementation of Lunar Permanence System engineering practices across applicable projects., • Support system and lower-level requirements management, including change control, audits, and coordination with other teams., • Support the development and creation of ConOps., • Develop, track, and maintain analyses and simulations for Communications Subsystem including: link analysis, signal distortion, system capacity, coverage analysis and performance., • Develop subsystem verification and validation activity definitions including verification methods, expectations, and compliance criteria., • Coordinate with Integration & Test teams to ensure test facilities (including integration labs) have the required capabilities per requirements definition., • Track V&V activities to successful completion, which may include reviewing subsystem test plans and possible travel to test facilities when needed., • Support in the definition of vehicle-level interfaces between systems and elements that interact with internal components., • Support in the authoring of safety artifacts, including functional hazard assessments and hazard mitigations., • Mentor early career systems engineers. Qualifications: • Minimum of a B.S. degree in electrical engineering, • 5+ years of experience in communication systems or RF testing, • Working knowledge of major RF components used in a communication subsystem (SSPA, LNAs, Transceivers, waveguides, antennas, filters, etc.), • Strong Communication fundamentals including understanding of digital modulation schemes including various types of QPSK modulation (OQPSK, UQPSK, spread spectrum approaches, etc.), FEC encoding like Reed Solomon and LDCP codes, and the relationship between information rates and RF requirements, • Experience delivering communications systems for spacecraft applications including experience addressing radiation effects, hardware/software integration, thermal management, etc., • Experience integrating communication systems into larger systems, including definition of management and data interfaces using protocols like RS-422, Ethernet, SpaceWire, HDLC, etc., • Experience developing static and dynamic RF simulations (link budgets, coverage analyses, line of site simulation, etc.) with tools like HFSS, STK, MATLAB, and/or Python., • Working knowledge of space environments and the process to space qualify a communication flight unit, • Ability to work from incomplete specifications to drive to completion., • Proven ability to interpret and apply high-level system requirements to practical design solutions for a complex physical assembly, • In depth knowledge of systems engineering practices (e.g., requirements development; standard verification methods; functional decomposition; standard diagramming techniques; risk and opportunity management, • Excellent written, verbal, and interpersonal communication skills Desired: • 8+ years of satellite communication systems, and familiarity with all phases of an RF's product lifecycle from concept, design, manufacture, test, and integration., • Working knowledge of simulation software like HFSS for antenna placement studies, Coverage analysis, antenna pattern simulations, ray tracing simulations, and other RF studies., • Full-life cycle engineering for a communication system from clean-sheet architecture definition through to operations planning and support. Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Stock Options for all regular employees (working at least 20 hours/week) * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! About TeraWave This role is part of TeraWave, a satellite communications network designed to deliver symmetrical data speeds of up to 6 Tbps anywhere on Earth. TeraWave consists of 5,408 optically interconnected satellites in low Earth orbit (LEO) and medium Earth orbit (MEO), providing enterprise-grade connectivity for tens of thousands of enterprise, data center, and government users who require reliable connectivity for critical operations. Special Mentions As the Harness Design Lead, you will be the technical authority for all spacecraft harnessing decisions and will lead a team of 5-7 harness design engineers through the full design-to-production lifecycle. You will define the harness architecture, establish design standards, and drive the team to deliver drawings on schedule to support first launch in late 2027. Responsibilities include but are not limited to: Team Leadership: • Lead and mentor a team of 6-8 harness design engineers, • Facilitate daily standups and weekly design reviews, • Assign and prioritize work packages across the team, • Track schedule milestones and report progress, • Conduct technical interviews for harness design candidates, • Establish team processes and design review gate Architecture & Standards: • Define the harness architecture for the TeraWave satellite constellation, • Establish harness design standards and naming conventions, • Own the harness-level Interface Control Documents (ICDs) with all subsystem teams, • Drive harness design-for-manufacturability decisions at the architecture level, • Lead harness mass budget allocation and tracking Cross-Subsystem Coordination: • Serve as the primary technical interface between the harness team and all subsystem leads (EPS, C&DH, GNC, propulsion, solar array, RF payload, optical payload, thermal), • Coordinate with Systems Engineering on harness-related requirements and verification, • Represent the harness team in program-level design reviews Technical Design & Analysis: • Develop and maintain harness Bundle Interconnect Diagrams (BIDs) and Wire Interconnect Diagrams (WIDs) for all spacecraft subsystems, • Create detailed harness assembly drawings, installation drawings, and connector pin assignment documentation, • Perform harness analysis including voltage drop calculations, current derating analysis, and mass estimation, • Conduct 3D harness routing and clearance verification using spacecraft CAD models, • Define harness segregation requirements for power, signal, and RF interfaces to ensure EMI/EMC compliance, • Specify connector types, wire gauges, shielding requirements, and termination methods for all harness branches, • Support harness design reviews and coordinate resolution of design issues with cross-functional teams Manufacturing & Integration Support: • Collaborate with manufacturing engineering to ensure harness designs are optimized for production, • Support harness fabrication shops during build activities including first article reviews and nonconformance disposition, • Participate in spacecraft integration and test activities to verify harness installation and functionality, • Develop harness installation procedures and work instructions for integration teams, • Support troubleshooting of harness-related issues during spacecraft assembly and test Minimum Qualifications: • Bachelor's degree in Electrical Engineering, Aerospace Engineering, Mechanical Engineering, or related technical field, • 10+ years of experience in spacecraft, satellite, or automotive harness design, cable routing, or electrical integration, • 3+ years of experience leading or managing a harness design team, • Demonstrated experience defining harness architecture for complex spacecraft or satellite programs, • Extensive experience producing and reviewing harness assembly drawings, BIDs, WIDs, and connector pin assignments, • Proficiency with electrical harness CAD tools (Creo Cabling / Routed Systems, Zuken, Capital Harness, or equivalent), • Deep knowledge of harness fabrication standards, • Strong understanding of EMI/EMC principles as applied to harness segregation, shielding, and grounding, • Expert knowledge of connector systems used in space applications (Micro-D, Nano-D, D-sub, circular MIL-DTL-38999, MIL-DTL-83513, etc.), • Proven ability to coordinate across multiple engineering disciplines and manage competing priorities, • Experience with harness design-for-manufacturability in production environments Preferred Qualifications: • Experience standing up a harness design team from scratch - defining processes, tools, and standards, • Direct experience designing harnesses for satellite constellations or high-rate production environments, • Experience with Creo Cabling / Routed Systems and Windchill PLM for harness configuration management, • Experience with high-voltage (>50V) spacecraft power harness design including Paschen discharge and corona considerations, • Background in harness-level signal integrity analysis for high-speed data interfaces (Ethernet, SpaceWire, LVDS), • Experience with harness weight optimization techniques for mass-constrained spacecraft, • Experience supporting harness fabrication shops - reviewing first articles, dispositioning nonconformances, and developing rework procedures Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Stock Options for all regular employees (working at least 20 hours/week) * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role supports the development and operations of New Glenn, a single-configuration, heavy-lift orbital launch vehicle capable of routinely carrying people and payloads to low-Earth orbit, geostationary transfer orbit, cislunar, and beyond. Its first stage is fully reusable, and the vehicle was designed from the beginning to be human-capable. As part of a hardworking, passionate, and accomplished team of experts, you will be responsible for the design, analysis, development, testing, and qualification of structural subsystems for New Glenn's second stage in support of design, manufacturing and operations. In addition, you will be responsible for creating design documentation that is concise and accurate and to perform peer reviews of designs and reports generated by other team members. You will also be expected to provide design guidance to junior engineers. This position will directly impact the history of space exploration and will require your dedicated commitment and detailed attention towards safe and repeatable spaceflight. As we transition from the initial design, release, and qualification testing of the flight hardware to the production and operational phase you will be responsible for supporting production issues, ongoing testing and mission operations. In this position you will: apply standard engineering techniques to design, install, modify, analyze, repair and test aerospace structural systems; development, release, and support of engineering artifacts across the development cycle to support hardware fabrication, assembly, verification, test and operations; implement operating procedures, resolve system malfunctions, and provide technical information; research and analyze customer design proposals, specifications, manuals, and other data to evaluate the feasibility, cost, and maintenance requirements of designs or applications. We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight. Passion for our mission and vision is required! • Lead structural design and configuration of pressurized and unpressurized launch vehicle structures, including interfaces and clearances, • Perform detailed design, analysis, development, and sustainment of primary and secondary flight structures, • Conduct research, concept development, and trade studies with emphasis on manufacturability, cost reduction, and performance, • Develop 3D models, detailed drawings, assemblies, installation layouts, and interface control documents, • Create test plans, specifications, and technical documentation to support flight hardware development, • Plan, coordinate, execute, and analyze subsystem and structural tests, • Collaborate with cross-functional teams to select materials, manufacturing processes, suppliers, and tooling for world-class aerospace hardware, • Maintain and report technical status, schedules, and budgets, • Mentor and technically support junior engineers and integration teams, • Identify opportunities for process improvement and operational cost savings, • Support development and modification of production equipment and tooling, • Prepare and present technical content to internal and external stakeholders, • Perform configuration, access, and clearance studies and develop solutions for mission-unique requirements, • Partner with internal and external organizations across design, manufacturing, and mission integration, • Passion for our mission: Millions of people living and working in space!, • Minimum of a B.S. degree in engineering and 5+ years of related experience with aircraft, spacecraft, or launch vehicle structures, • Experience on launch vehicles, aircraft or similar. Hands on experience with hardware "on the production floor" and/or "in service", • Design of minimal-mass structure, especially with aim to reduce cost and manufacturing time., • Experience with material development and structural testing, • Strong understanding of structural design and analysis principles, • Structural design experience using CAD (Creo/Windchill preferred), hand calculations, and FEA tools, • Experience working in a multi-functional organization to develop designs and produce world-class engineered products, • Strong understanding of metallic design fundamentals, • Experience in bolted joint design and analysis, • Experience with Geometric Dimensioning and Tolerance analysis (ASME Y14.5), • Familiarity with ASME Y14.100 and Y14.41, • Ability to take ownership of the hardware lifecycle from requirements definition through concept development, design, analysis, testing, qualification, and integration onto a launch vehicle, • Strong written and verbal communication skills, • MS degree in engineering or equivalent, • Experience designing for manufacturability and value engineering, with focus on cost reduction and build time hour optimization., • Experience designing hot and cryo structures, • Experience with rapid development techniques for hardware., • Demonstrated expertise with any industry standard analysis codes: Ansys, Nastran, Optistruct, LS Dyna, Hypermesh, Hypersizer, NASGRO, Abaqus, • Familiarity with buckling, fatigue and/or fracture failure modes, • Experience or expertise with fabrication of large-scale metallic aerospace structures, • Knowledge of systems engineering practices, fabrication and integration processes, and quality control, • Experience in large scale structural test and instrumentation, • Working knowledge of MATLAB Compensation Range for: CO applicants is $110,938.00 - $155,312.85 WA applicants is $121,023.00 - $169,432.20 Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Stock Options for all regular employees (working at least 20 hours/week) * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of Blue Origin Operations, which is comprised of Integrated Supply Chain, Test Operations, Safety, Quality, and Mission Assurance. This includes Manufacturing and Supply Chain support across all Blue Origin facilities. As an Automation Engineer at Blue Origin, you will be a key architect of the state of the art production system for our satellite constellation programs. You will be responsible for designing, developing, and deploying cutting edge automation solutions that ensure unprecedented levels of quality, reliability, and repeatability in our manufacturing process. Your work will directly enable us to build satellites at the scale required to achieve our mission of millions of people living and working in space for the benefit of Earth. We are looking for a hands on engineer who is passionate about building robust and intelligent manufacturing systems. From robotic assembly and material handling to automated test and inspection, you will own the automation lifecycle from concept to commissioning. This is a foundational role with the unique opportunity to define the automation strategy and implement the core technologies for a brand-new factory. Responsibilities include but are not limited to: • Automation Design & Development:Conceptualize, design, and deploy automated manufacturing systems, including robotic cells, PLC controlled equipment, machine vision systems, and automated test stations., • System Integration & Commissioning:Lead the installation, commissioning, and validation (IQ/OQ/PQ) of automation equipment on the factory floor, ensuring seamless integration with other processes and the Manufacturing Execution System (MES)., • Programming & Control:Develop and debug robust programs for PLCs (e.g., Rockwell/Allen-Bradley, Siemens), HMI screens, and 6 axis industrial robots (e.g., FANUC, KUKA)., • Tooling & Fixturing:Design, test, and implement custom End of Arm Tooling (EOAT), fixtures, and material handling systems required for automated processes., • Design for Automation (DFA):Collaborate closely with design and industrial engineering teams during New Product Introduction (NPI) to provide critical DFA feedback, ensuring product designs are optimized for automated assembly and inspection., • Sustainment & Optimization:Provide ongoing engineering support to the production floor, troubleshooting equipment and continuously optimizing automated processes to improve cycle time, yield, and system uptime., • Safety & Risk Assessment:Perform thorough risk assessments on all automated equipment and implement robust safety systems compliant with industry standards (e.g., ANSI/RIA). Minimum Qualifications: • Bachelor of Science or Equivalent Experience in Electrical Engineering, Mechanical Engineering, Mechatronics, Computer Science, or a related field., • 8+ years of experiencein a manufacturing automation/controls engineering role, with a proven track record of leading complex automation projects from concept to completion., • Expert level abilityin designing and architecting integrated, multi-station automated manufacturing systems., • Demonstrated experience serving as the primary technical lead for automation during a major New Product Introduction (NPI) program., • Expert level proficiency in programming PLCs and robots, with an ability to set standards and best practices for the team., • Experience leading technical trade studies and making data-driven decisions for capital equipment selection. Preferred Qualifications: • Experience designing and implementing automation for satellite or large-scale electronics assembly and test., • Deep experience with integrating automation equipment with Manufacturing Execution Systems (MES) and enterprise data systems., • Experience with advanced manufacturing technologies like collaborative robots, AMRs (Autonomous Mobile Robots), and IoT/Industry 4.0 concepts. Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Stock Options for all regular employees (working at least 20 hours/week) * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of Blue Origin Operations, which is comprised of Integrated Supply Chain, Test Operations, Safety, Quality, and Mission Assurance. This includes Manufacturing and Supply Chain support across all Blue Origin facilities. As an Automation Engineer at Blue Origin, you will be a key architect of the state of the art production system for our satellite constellation programs. You will be responsible for designing, developing, and deploying cutting edge automation solutions that ensure unprecedented levels of quality, reliability, and repeatability in our manufacturing process. Your work will directly enable us to build satellites at the scale required to achieve our mission of millions of people living and working in space for the benefit of Earth. We are looking for a hands on engineer who is passionate about building robust and intelligent manufacturing systems. From robotic assembly and material handling to automated test and inspection, you will own the automation lifecycle from concept to commissioning. This is a foundational role with the unique opportunity to define the automation strategy and implement the core technologies for a brand-new factory. Responsibilities include but are not limited to: • Automation Design & Development:Conceptualize, design, and deploy automated manufacturing systems, including robotic cells, PLC controlled equipment, machine vision systems, and automated test stations., • System Integration & Commissioning:Lead the installation, commissioning, and validation (IQ/OQ/PQ) of automation equipment on the factory floor, ensuring seamless integration with other processes and the Manufacturing Execution System (MES)., • Programming & Control:Develop and debug robust programs for PLCs (e.g., Rockwell/Allen-Bradley, Siemens), HMI screens, and 6 axis industrial robots (e.g., FANUC, KUKA)., • Tooling & Fixturing:Design, test, and implement custom End of Arm Tooling (EOAT), fixtures, and material handling systems required for automated processes., • Design for Automation (DFA):Collaborate closely with design and industrial engineering teams during New Product Introduction (NPI) to provide critical DFA feedback, ensuring product designs are optimized for automated assembly and inspection., • Sustainment & Optimization:Provide ongoing engineering support to the production floor, troubleshooting equipment and continuously optimizing automated processes to improve cycle time, yield, and system uptime., • Safety & Risk Assessment:Perform thorough risk assessments on all automated equipment and implement robust safety systems compliant with industry standards (e.g., ANSI/RIA). Minimum Qualifications: • Bachelor of Science or Equivalent Experience in Electrical Engineering, Mechanical Engineering, Mechatronics, Computer Science, or a related field., • 5+ years of experiencein a manufacturing automation/controls engineering role., • Demonstrated experience developing and commissioning at least two of the following: robotic workcells, PLC controlled machines, or machine vision systems., • Proficiency in programming PLCs (ladder logic, structured text) and/or industrial robots., • Experience with 2D/3D CAD software (e.g., AutoCAD, SolidWorks, Catia) for designing electrical schematics or mechanical tooling. Preferred Qualifications: • Experience in the aerospace, semiconductor, automotive, or electronics manufacturing industries., • Proficiency with a specific PLC platform (e.g., Rockwell Studio 5000) and robot brand (e.g., FANUC)., • Experience with industrial communication protocols (e.g., EtherNet/IP, PROFINET). Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Stock Options for all regular employees (working at least 20 hours/week) * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Job Description CPI AdamWorks in Centennial, Colorado, has a need for an entry-level manufacturing technician. We design and build composite structures for aircraft, defense, and space and would love you to join our team! Who We Are: CPI AdamWorks is a division of CPI Radant Technologies Division. They are located in Centennial, Colorado. Together, we are the radome-and-composite‐structures division of Communications & Power Industries LLC (CPI). We are formally known as CPI Radant Technologies Division, and we serve the aerospace, defense, naval, and commercial industries by designing, manufacturing, testing and supporting advanced composite radomes, reflectors and structural composite products. What We Do: Radomes are special “domes” made of composite materials that protect antennas and radar systems from the environment while allowing electromagnetic signals to pass. CPI Radant produces these for critical applications, meaning: • They enable secure communications and radar/electronic-warfare capabilities for military and commercial aerospace platforms., • Their manufacturing includes large apertures and high‐frequency performance., • Mold and material preparation for layups of composite structures, • Composite layup and tooling, using carbon fiber and other composite materials, • Basic mechanical assembly, use of hand tools and hand measuring equipment, • Composite experience preferred. Will provide training., • Must be US Citizen (ITAR and DoD program requirements)., • Work schedule is four 10 hour days, Mondays through Thursdays, 1st shift 6:00am-4:30pm SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries’ thousands of products have impacted people’s lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics. #LI-MH1

Job Description Job Title: Wire Harness Technician / Assembly, Integration & Test Technician Job Description This full-time role focuses on assembling, integrating, and testing spacecraft hardware, with a strong emphasis on wire harness fabrication, soldering, and electronic assembly. You will build and test flight hardware for space systems, including harnesses, PCBs, and propulsion modules, while supporting environmental and spacecraft testing campaigns. This position is ideal for someone who is passionate about space systems, enjoys hands-on technical work, and wants to grow within a close-knit, highly collaborative team. Responsibilities • Assemble spacecraft hardware and flight components according to engineering drawings, specifications, and written procedures., • Build, route, and terminate wire harnesses and connectors for spacecraft and propulsion systems., • Perform soldering operations on components and assemblies in accordance with industry standards such as IPC and J-STD., • Assemble and solder electronic components onto printed circuit boards (PCBs) and perform basic board-level repairs., • Inspect solder joints, PCB assemblies, and harness builds to verify compliance with quality and flight hardware requirements., • Install project-specific sensors such as thermistors and accelerometers on spacecraft hardware and test setups., • Follow step-by-step guidelines for building electrical and mechanical assemblies and accurately document the build process., • Operate hand tools, including torque wrenches and similar tools, to meet product and torque specifications., • Support propulsion module and spacecraft testing, including setup, monitoring, and teardown of test configurations., • Work with engineers to troubleshoot hardware problems, perform diagnostics, and support non-conformance resolution activities., • Conduct electronics testing on components and assemblies using appropriate test equipment and procedures., • Support environmental and vacuum chamber testing campaigns for spacecraft hardware as needed., • Read and interpret technical drawings, schematics, and written instructions to complete assembly and test tasks., • Use software tools such as Visio, Excel, and CAD drawing software to support documentation, layout, and reporting., • Maintain accurate records of assemblies, tests, and inspections, ensuring traceability and compliance with process requirements., • Follow cleanroom protocols, safety procedures, and quality standards while working with flight hardware., • Experience following step-by-step guidelines for building electrical and mechanical assemblies and documenting the process., • Proficiency in harness fabrication, including building harnesses and wire connectors., • Hands-on experience with soldering, crimping, and harness builds., • Experience assembling and soldering components onto PCBs., • Experience with electronics testing of components and assemblies., • Experience with board repair and rework., • Ability to read and follow drawings, schematics, and written instructions., • Ability to operate hand tools such as torque wrenches and similar tools to product specifications., • Troubleshooting and diagnostic process knowledge, particularly for hardware issues., • Ability to work closely with engineers to troubleshoot and resolve hardware problems., • Good written and verbal communication skills., • Good time-management skills and ability to handle multiple tasks effectively., • Ability to obtain IPC certifications for wire harnessing and soldering assemblies., • Familiarity with industry standards such as IPC-620, J-STD, and J-STD-001 for soldering and harness work., • Experience with fabrication and test of hardware assemblies., • Experience with non-conformance resolution processes., • Experience working with flight hardware in aerospace or similar high-reliability environments., • Experience with propulsion module and spacecraft testing activities., • Experience with vacuum chambers and environmental testing of hardware., • Experience with Visio, Excel, and CAD drawing software for documentation and design support., • NASA certifications for soldering, crimping, and harnesses are highly desirable., • Experience with CAD software for layout and documentation of assemblies., • Familiarity with cleanroom practices and handling of sensitive electronic and mechanical components., • Strong attention to detail and commitment to quality in assembly and test work., • Demonstrated ability to follow verbal and written instructions accurately. You will work primarily in a cleanroom environment, handling sensitive spacecraft and propulsion hardware under strict quality and cleanliness standards. The role is hands-on and tool-intensive, involving regular use of hand tools such as torque wrenches and other assembly equipment. The position requires the physical ability to lift up to 50 lbs and to climb a 13-foot ladder when needed to access hardware and test setups. You will be part of a smaller, close-knit organization where collaboration with engineers and technicians is frequent and communication is open. The company focuses on advanced propulsion systems for satellites, including electromagnetic thrusters integrated into CubeSats, offering exposure to cutting-edge space technology. The culture emphasizes continuous learning, teamwork, and innovation. Employees typically receive paid time off that increases with experience, a 401(k) program with matching, comprehensive benefits, and education reimbursement. The facility observes a shutdown period from Christmas through New Year’s, providing additional time away from work. Job Type & Location This is a Contract to Hire position based out of Littleton, CO. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

At Owens & Minor, we are a critical part of the healthcare process. As a Fortune 500 company with 50+ facilities across the US and 18,000 teammates in over 90 countries, we provide integrated technologies, products and services across the full continuum of care. Customers-and their patients-are at the heart of what we do. Our mission is to empower our customers to advance healthcare, and our success starts with our teammates. Owens & Minor teammate benefits include: * Medical, dental, and vision insurance, available on first working day * 401(k), eligibility after 30 days of employment * Employee stock purchase plan * Tuition reimbursement * Development opportunities to grow your career with a global company JOB SUMMARY Our Clinical Service Technicians positively impact the lives of patients each and every day by delivering medical equipment to them in their home. Clinical Service Technicians provide excellent customer service by going above and beyond to communicate product information, provide solutions and ensure understanding of relevant details so that patients feel comfortable operating their equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES * Load and unload medical equipment, oxygen (gas or liquid) and supplies onto and off of delivery vehicles. * Deliver medical equipment to homecare patients; including, setting up the equipment, instructing patients on the basic use of the equipment and assisting patients in solving problems regarding equipment use. Will also pick up medical equipment. * Ensure patients do not suffer service failures by proactively communicating estimated arrival times with patients and/or family members. * Complete daily delivery logs, pick-up and delivery forms, reimbursement documents and vehicle maintenance logs via paper or electronic means (cell phone and/or iPad). * Perform routine vehicle maintenance and daily inspections including the checking of gasoline, oil fluids, tire pressure and brakes. Responsible for reporting any issues or malfunctions to leadership. * Respond to critical situations as appropriate, during regular business hours and on an on-call basis. * Comply with all applicable traffic laws and regulatory requirements; including, practicing safe driving habits, providing required documents needed for the Driver Qualification File, abiding by hours of service, daily log and hazardous materials (placarding, training and shipping papers) regulations. * Adhere to mandatory reporting requirements; physical abuse of any family member, unsafe home environment for care ordered, unsanitary conditions or animals causing such, or insufficient food for children. * May clean and assist with the repair of equipment. * May assist with the scheduling of daily deliveries and pickups, ensuring they are organized in a timely and efficient manner. * May assists less experienced Service Technicians by providing guidance and training on job duties and responsibilities. * Performs other duties as required SUPERVISORY RESPONSIBILITIES * None MINIMUM REQUIRED QUALIFICATIONS Education and/or Experience * High School Diploma required. * Must be at least 21 years of age. * At least one-year related work experience required. * Minimum of three years driving history required. Certificates, Licenses, Registrations or Professional Designations * Must possess an active, valid Commercial Driver's License with Hazardous Materials Endorsement at all times * Successful completion of Apria Healthcare's Driver Training Program * Meet job-related requirements to comply with D.O.T., F.D.A. and Joint Commissions regulations SKILLS, KNOWLEDGE AND ABILITIES * Patient Focused * Problem Solving/Analysis * Effective Communication * Integrity/Personal Credibility Computer Skills * Basic computer skills Language Skills * English (reading, writing, verbal) Mathematical Skills * Basic level math skills PHYSICAL DEMANDS While performing the duties of this job, the employee uses his/her hands to finger, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, or crouch; talk or hear. * The employee uses computer and telephone equipment. * Regularly required to use hands to write, use computer, operate a motor vehicle, use a handheld device (tablet), telephone and use a document imaging system and manipulate documents. * Regularly required to read documents and write neatly, legibly and transcribe accurate information and numbers/values. * Employee continually engages in activities that require talking and hearing. * This position requires frequent variations including sitting, walking, standing, kneeling, reaching or stooping. * Specific vision abilities required to perform this job safely include close vision, distant vision, night (low to limited light) vision and the ability to adjust focus to work on a computer and read documents. * Strength Aspects: o Frequently required to stand and lift objects from 1" to 36" high with weights ranging from 10 lbs - 160 lbs, and carry objects for distances ranging from 1 ft -350 ft, including travel up and down stairs or in elevators. o Frequently required to push or pull objects weighing from 20 lbs - 60 lbs, up and down stairs, through doorways and thresholds, using dollies or carts, or on flat or angled surfaces which may include outdoor surfaces, carpeting or smooth floors. Distances pushed or pulled could range from 1-25 ft on average. o Frequently required to grip objects with hands, up to 15 lbs of force. o Frequently required to grip objects with fingers, up to 10 lbs of force. * Body Position and Flexibility Elements o Frequently required to climb 100 stairs on average ranging from 3"-10" in height, o Frequently stepping in and out of company vehicles ranging up to 20" in height. o Occasionally required to climb ladders up to 10' high, in general. o Frequently required to bend down at the waist to a torso level of 24" above the floor. o Frequently required to reach, on average, 20" away from the body. o Occasionally required to kneel on one or both knees and squat to perform many of the above tasks. WORK ENVIRONMENT * The employee is required to inspect and safely operate a motor vehicle during the day and night and in a wide range of weather and traffic conditions. * The noise level in the work environment can range from low to high but varies based on the locations or activities proximate. * There is moderate exposure to dust, fumes, mists, odors and toxic or caustic chemicals. * Temperature ranges from normal indoor climate-controlled environment in buildings or vehicles and various outdoor conditions and temperature extremes that could be encountered throughout the year in a variety of US states. * Lighting is generally provided via florescent lighting indoors, natural lighting outdoors and low light conditions consistent with outdoor and/or night working environment. * May be required to receive vaccinations and participate in medical assessments and testing consistent with the work environment or patients exposed to. * Will be required to wear various personal protective equipment consistent with the hazards encountered in this role. * Will be required to use hand tools for assembly and repair, material handling equipment, cutting, carrying devices, cleanup kits or equipment. * May be required to work with cryogenic fluids requiring special precautions and PPE. The physical demands and work environment characteristics described above are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. If you feel this opportunity could be the next step in your career, we encourage you to apply. This position will accept applications on an ongoing basis. Owens & Minor is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, sex, sexual orientation, genetic information, religion, disability, age, status as a veteran, or any other status prohibited by applicable national, federal, state or local law. Owens & Minor and Accendra Health are now two separate companies. For a limited time, this career site will provide job opportunities for both organizations. Each job description includes the respective company designation, or you can use the company filter tool at the top of the page to sort the listings. Please ensure you confirm which company you are applying to. We are excited to have you here, and thank you for your interest in Owens & Minor and Accendra Health. Owens & Minor () Accendra Health

Our promise to you: Joining AdventHealth is about being part of something bigger. It's about belonging to a community that believes in the wholeness of each person, and serves to uplift others in body, mind and spirit. AdventHealth is a place where you can thrive professionally, and grow spiritually, by Extending the Healing Ministry of Christ. Where you will be valued for who you are and the unique experiences you bring to our purpose-minded team. All while understanding that together we are even better. All the benefits and perks you need for you and your family: * Benefits from Day One: Medical, Dental, Vision Insurance, Life Insurance, Disability Insurance * Paid Time Off from Day One * 403-B Retirement Plan * 4 Weeks 100% Paid Parental Leave * Career Development * Whole Person Well-being Resources * Mental Health Resources and Support * Pet Benefits Schedule: Full time Shift: Day (United States of America) Address: 2525 S DOWNING ST City: DENVER State: Colorado Postal Code: 80210 Job Description: Anticipates the needs of the surgeon and keeps the circulating nurse informed throughout a procedure. Maintains high standards and quality in facilitating cost savings and containment. Assembles all necessary supplies, equipment, and medications prior to the procedure. Supports customer and employee satisfaction activities; maintains good relationships with physicians, management, other departments, and staff; and responds to complaints in a timely manner. Other duties as assigned. Monitors aseptic technique of the entire surgical team and takes immediate corrective action for any breaks in technique. Identifies and reports environmental concerns to management and ensures adherence to regulatory standards and policies. Supervises other healthcare team members in the surgical environment and assists with orientation, training, and education of new personnel. Promotes a safe environment and takes appropriate action in emergency situations, controlling hazards that may endanger patients, visitors, and employees. Follows CDC isolation guidelines, uses PPE appropriately, and performs hand washing according to policy, adhering to all infection control practices. Participates in practice changes resulting from performance improvement activities and supports departmental quality standards and initiatives. Provides assistance and support to members of the surgical team as needed. Assists the team with safe and efficient operating room turnover times and directs ancillary personnel during room turnover. Knowledge, Skills, and Abilities: * Ability to communicate by reading, writing legibly, speaking, and comprehending English effectively in order to carry out job requirements. [Required] * Basic skills related to aseptic/sterile technique and knowledge of surgical instrumentation. [Required] * Knowledge of commonly used concepts, practices, and procedures in the healthcare industry. [Required] * Up-to-date knowledge of surgical instruments and supplies to hand surgeons the correct tools during surgeries. [Required] * Up-to-date knowledge of regulatory requirements and laws at various jurisdictional levels. [Required] * Ability to understand and process surgeon dictated instructions and directions. [Required] * Basic computer skills and knowledge of Microsoft Office. [Required] * Ability to consistently demonstrate clear communication skills, strong anticipatory skills, and concentration to detail. [Required] * Assembly of mechanical devices and knowledge of fundamental human anatomy. [Required] * Must be able to work well with multiple team members. [Required] * Ability and willingness to work a flexible schedule and adapt to change. [Required] * Organizational skills, customer relations, verbal and interpersonal skills. [Required] * Proficiency in grammar/spelling, and the ability to read/comprehend written instructions and follow verbal instructions. [Required] * Keyboarding (manual) and computer (visual) skills. [Required] * Ability to multitask and possess excellent communication skills. [Required] Education: * Associate [Preferred] * High School Grad or Equiv [Required] * Technical/Vocational School [Preferred] Field of Study: 1+ years relevant experience [Preferred] * 2+ years of technical experience in the field [Preferred] Additional Information: Basic Life Support - CPR Cert (BLS) [Required] * State Certified Surgical Technologist (CST) [Required] OR NBSTSA Certified Surgical Technologist (CST) [Required] OR Technician in Surgery - Certified (NTSC) [Required] Physical Requirements: (Please click the link below to view work requirements) Physical Requirements - Pay Range: $24.45 - $45.46 This facility is an equal opportunity employer and complies with federal, state and local anti-discrimination laws, regulations and ordinances. Category: Surgery Services Organization: AdventHealth Porter Schedule: Full time Shift: Day Req ID: 151508464

Overview Every moment of every day, people all over the world turn to Panasonic to make their lives simpler, more enjoyable, more productive and more secure. Since our founding almost a century ago, we've been committed to improving peoples' lives and making the world a better place-one customer, one business, one innovative leap at a time. Come join our journey! Responsibilities ( by clicking this link you are being referred to an external site that is not part of Panasonic ) What You'll Get To Do: The Regional Sales Manager - Wholesale is responsible for effectively executing the Company's sales strategy to achieve maximum market share and profitability for PESNA-IAQ's portfolio of products. This includes managing and directing the activities of Area Sales Manager(s) in their assigned region. It also requires responsibility for hiring, training, and ensuring performance of independent manufacturers' representatives in their assigned region with special emphasis on key specification markets and corporate targets. The Regional Sales Manager will create, with their Area Sales Manager(s), pull through business by creating Panasonic specifications through builders and specifiers for various new construction, remodel and renovation projects including converting projects specified with competitive products. * Primary, day-to-day responsibility to manage their Area Sales Manager(s) and Independent Sales Representatives in their region . * Facilitating calls on sales channel partners, installers, contractors, engineers, specifiers, and architects as part of an independently planned sales program designed to meet the sales targets of the company and the needs of the territory. * Sales program is based on detailed analysis of data related to territory and presented in a compelling manner through use of automation tools like Salesforce and CMD. * Maintains clear, complete, and accurate records of all contacts and potential business in the format requested by the National Sales Manager. * Responsible for active management of distribution channels within territory under guidelines established by the company. * Develops plans and makes proposals for promotional activities to meet the specific needs of territory. * Responsible for superior Customer Satisfaction in region including direct customers and end users of our products and services. * Gather construction data and project leads. Analyze potential and research the viability of the opportunities. Work with other Regional Sales Managers and Area Sales Manager(s) to position Panasonic with key decision makers at specifiers, national builders, and corporate account targets. * Deliver sales and profit targets for defined region. Responsible for developing demand forecast for region used in PSI process. * 50-60% travel requirement from home-based office annually. Scope : * Reports to the National Sales Manager Wholesale * Sales Target and Demand Forecast for defined region in area of responsibility * Manage sales expenses within budget * Identifies independent Sales Representative companies and proactively address challenges with channel partners * Develop joint sales plan and execution criteria with the Area Sales Manager(s). * Participates on new product development teams as Sales representative for channel(s). * Lives in region with easy access to major airport. Qualifications What You'll Bring: Education & Experience : * Bachelor's Degree in Business, Marketing or related field preferred. * At least 3-5 years of experience directly managing a sales team, including experience managing independent manufacturing representatives in the wholesale construction materials industry. * Broad knowledge of distribution strategies, business reasons underlying those strategies and firsthand experience in tactical implementation. * Technical or hands-on background in the HVAC field highly desirable. Alternatively, a demonstrated ability to acquire knowledge quickly is acceptable. * Deep knowledge of US local building codes and future trends. * Highly competent in use of technology including MS Office products, and demonstrated ability to continuously master new skills with corporate business systems. * Candidates should currently be located in South Central area- Dallas TX and Denver Colorado . Competencies : * Highly talented "people-person" who can see through business issues and find solutions for them. * Ability to identify, research, and solve contractor/end user installation and product use issues. * Competent in assessing challenging installation situations and resolving technical problems. * Utilization of automation tools and technology to increase efficiency. Communications : * Ability to communicate with all stakeholders (internal and external) in a timely and effective way. * Timely and complete responses to all inquiries. * Ability to communicate best practices to contractors at both the management level and with installers in a way that encourages the use of Panasonic products and installation via preferred method. * Articulate problems and solutions in concise, easy to understand language at appropriate levels: installer, contractor, distributor, specifying engineer, and architect. * Advanced skills in developing and delivering compelling solutions to close sales opportunities. * Fluency in English language required, Spanish language a plus. Other Requirements : * Carry sample product and merchandizing displays into and out of customer locations, carry and deliver for shipment and load/unload from car/van frequently. Able to carry 40lbs unaided. * Load, unload, setup custom displays for trade shows etc. Perform assembly of and wiring of POP displays * Negotiate construction sites unaided and be able to demonstrate product installation when necessary. * Candidates should currently be located in South Central area- Dallas TX and Denver Colorado only. Benefits & Perks - What's In It For You: Panasonic prioritizes total well-being and offers comprehensive benefits options to support physical, emotional, financial, social, and environmental health: * Health Benefits - Offering medical, dental, vision, prescription plans, plus Health Savings Account and Flexible Spending Account options. * Voluntary Benefits - Life, accident, critical illness, disability, legal, identity theft, and pet insurance. * Panasonic Retirement Savings & Investment Plan (PRSIP) - 401(k) plan with company matching contributions and immediate vesting. * Paid Time-Off Benefits - Vacation, holidays, personal days, sick leave, volunteer, and parental & caregiver leave. * Educational Assistance - Tuition reimbursement for job-related courses after six months of service. * Health Management and Wellbeing Programs -Lifestyle Spending Account, EAP, virtual health management, chronic condition, neurodiversity, tobacco cessation, substance abuse support, and life stage and fertility resources. Available to eligible employees starting the first day of the month following your start date. Eligibility for each benefit may vary based on employment status, location, and length of service. * Employee Recognition Program - High5 employee recognition and awards platform, quarterly and annual employee recognition * Annual Bonus Program - Opportunity for an annual performance-based bonus. We Take Opportunity Seriously: At Panasonic, we are committed to a workplace that genuinely fosters inclusion and belonging. Fairness and Honesty have been part of our core values for more than 100 years and we are proud of our diverse culture as an equal opportunity employer. The wage range of $135,000 - $155,000 is just one component of Panasonic's total package. Actual compensation varies depending on the individual's knowledge, skills, experience, and location. This role may be eligible for discretionary bonuses and incentives. This role may be eligible for; * Car Allowance - Included as part of the compensation package. * Sales Incentive - As part of the overall compensation package, this role is eligible to participate in a sales incentive compensation program.. ?We understand that your career search may look different than others and embrace the professional, personal, educational, and volunteer opportunities through which people gain experience. If you are actively looking or starting to explore new opportunities, send us your application!? Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or other characteristic protected by law. All qualified individuals are required to perform the essential functions of the job with or without reasonable accommodation. Due to the high volume of responses, we will only be able to respond to candidates of interest. All candidates must have valid authorization to work in the U.S. Thank you for your interest in Panasonic. #LI-HD1 #LI-REMOTE REQ-154008

Job Description prosource.it is a global IT Managed Service provider working with Medium to Enterprise level, global clients and looking for a Systems Integration Technician who is interested in joining a global, enterprise level team who are delivering technical solutions to our internal business partners to drive processes and meet business requirements. We understand that we need exceptional talent to accomplish our mission - therefore we place great emphasis on the people component of IT, and we strive constantly to attract, develop, and retain the best people. We cultivate an ethos and environment within which our people are focused, nurtured, and continually challenged to develop and improve their competencies in a fun and rewarding culture. RESPONSIBILITIES: Assembling and testing all manufactured products prior to being shipped to the customer Participating in continual training and development Completing daily reports to indicate goods that have been shipped and to identify late orders Reading and following basic diagrams, drawings, specifications, bills of material, and instructions to accurately assemble components into finished products Assisting other Assemblers when required Performing work in accordance with quality standards and safety procedures Maintaining a safe, clean, and organized workspace or assembly station Unit testing and quality assurance Flash and verify firmware on production units Document ID and assign units to field locations Requirements Basic understanding of IOT wireless networking Proficient with Python Basic understanding of C Proficient using configuration files Proficient using Redis Proficient with Docker/Podman Proficient at problem solving technical system (determining where issues are originating from) Professional documentation skills for bug reporting and process documentation AWS Dynamo, IoT, Kinesis and Lambdas experience Comfortable working with data dumps to help find flaws or error in a system Comfortable diagnosing and repairing faults, resolving network issues, and installing and configuring hardware and software Benefits To all our fulltime staff members, we provide an exceptional benefits package, including medical, dental, vision, long term disability, short term disability, 401k contribution, paid holidays, and PTO. EMPLOYMENT DETAILS Location: Denver, CO or Houston, TX Hours: 40 hours per week. ONSITE. Engagement: W2 Salary: $85k-$95K depending on experience Travel: Some travel required Applicants for employment in the US must have work authorization that does not, now or in the future, require sponsorship of a visa for employment authorization in the United States. Applicants are also expected to provide references upon request.