Welder jobs in Honolulu, HawaiiCreate job alerts

Job Description SUMMARY DESCRIPTION: The Welder/Diver is a diving specialist who is required to maintain proficiency in surface and hyperbaric (wet and dry chamber) welding as well as the skills required by all divers. The position may require worldwide travel on an emergency call out basis. The Welder/Diver will be expected to work in the facility (8 hours), possibly on board ships at sea and possibly on remote job sites, (12 hours). This position reports to the Diving Supervisor. CLASSIFICATION: Non-Exempt (hourly) DUTIES AND RESPONSIBILITIES: • Accomplish all tasks assigned by the Diving Supervisor. If assigned a task for which they do not consider them self qualified by either training or experience, they shall immediately inform the Diving Supervisor., • Read, understand, and comply with all of Phoenix policies and with applicable government regulations as they relate to their qualifications or performance while engaging in diving operations., • Maintain proficiency in welding and NDT procedures as directed by the Diving Supervisor. Perform all welding and NDT per applicable government and commercial requirements., • Maintain all government and commercial weld qualifications in accordance with Phoenix, welding and qualification procedures, training, qualification maintenance, and related program data., • Comply with regulations or instructions concerning the use, maintenance, repair, and testing of all diving equipment provided for the operation., • Report to the Diving Supervisor any recent medical treatment or illness so that a proper determination can be made concerning their fitness to dive., • Immediately report all symptoms or suspected symptoms as early and accurately as possible., • Report to the Diving Supervisor any defect or malfunction of the diving equipment provided for the diving operation., • Follow safe diving practice at all times during the diving operation whether on deck or in the water. Bring to the attention of the Diving Supervisor any questionable items. Be alert for the safety of others., • Assist in the training of new personnel or tenders., • Remain awake and in the vicinity of the decompression chamber for at least one hour following treatment or a hyperbaric exposure outside the no decompression limits., • Know and observe the rules for flying after diving or traveling to altitudes higher than the dive site., • Ensure their diving equipment has been correctly maintained, prepared, and tested before each dive. This requirement should never be delegated to others., • Maintain a diver's logbook, which details all dives, medical examinations, courses taken, and personal equipment maintenance., • Ensure their medical certificates are up to date and recorded in their logbook., • Present their logbook to the Diving Supervisor on every job., • Maintain current certification in first aid and CPR., • Graduate of a professional diving school., • Minimum five years actual underwater-welding experience that can be substantiated by a letter of qualification from a diving company recognized by the industry as having acceptable wet-welding capability., • Must be a certified welder whose qualifications are current in accordance with the American Welding Society (AWS) specification D3.6, class A (dry weld) and class B (wet weld)., • Significant physical effort required. Significant exposure to physical risk., • Ability to pass annual diving physical., • Ability to obtain a U.S. Government security clearance. Phoenix International Holdings, Inc, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status

Job Description Position Title: Welder Reports To: Structural Superintendent FULL TIME POSITION-OVERTIME ELIGBILE Relocation Assistance will NOT be offered for this position. Position Summary: PSI is the largest privately owned shipyard in Hawaii, with two of the largest dry docks in the state. We have been in business since 1944 and have a large labor force of skilled craftsman with a full support staff of professionals who comprise of engineering, project management, QA, EHS, accounting, contracts, and human resources. The Welder welds metal components with appropriate equipment to fit and join, fabricate, and/or repair a variety of marine equipment and structural components per specifications and in accordance with the production schedule. Performs SMAW, GMAW, and other welding techniques in all positions of various metal and alloys. Must be familiar with ABS & NAVSEA standards. Pacific Shipyards International, LLC Expectations of Employee: • Is committed to the company values and adheres to all Pacific Shipyards’ policies and procedures, • Perform duties of his/her job and as assigned by Management, • Maintain a positive and respectful attitude and conduct her/himself with integrity and in a polite, professional manner treating customers and co-workers courteously and respectfully, • Communicates regularly with Officers, Managers, & Supervisors about the different divisions and department’s issues, • Consistently be on time for work, meetings and appointments and deliver work projects by assigned due dates, • Maintain assigned work areas in a clean and orderly fashion, • Maintain and ensure the safety of all assigned equipment, • Perform all duties in conformance to appropriate safety and security standards, • Meet productivity goals and quality standards as set by management, • Ability to read and understand drawings and specifications, • Ability to handle multiple tasks and balance priorities, • Performs welding duties using wire welding GMAW (Gas Metal Arc Welding), FCAW (Flux Core Arc Welding), GTAW (Gas Tungsten Arc Welding), or SMAW (Stick Welding), • Weld steel components with welding equipment as specified by procedures, layouts, blueprints, diagrams, work orders, or oral instructions. Welds range from simple tacks to complex welds, performed in varying positions, • Works includes set-up, laying out work using fixtures and guides to repair, modify, or fabricate parts and/or equipment products, • Operates and/or uses related equipment and tools which include forklifts, hoists, slings, grinders (portable & bench), cutting torches, hand tools, drills, punches, a tape measure, and Air Arc, • Keeps equipment operational by completing preventive maintenance requirements; follow manufacturer’s instructions; troubleshoot malfunctions; call for repairs and complete the daily check sheets, • Reads, understands, and follows job order specifications, blueprints, work instructions, and procedures., • Maintains level of work performance in accordance with standards and/or job order specifications, • Participates in process and product development and improvement programs, teams, and focus groups, • High School Diploma or equivalent, • Minimum 1 year of related experience required, • ASW certification preferred, however, not required, • Large scale industrial experience. Marine/shipyard/ship repair experience preferred, however, not required, • Experience with computers/electronics preferred, • Ability to read blueprints, • Ability to work standing on a variety of surfaces including steel decks and concrete for 8-12 hours per day, • Ability to work overtime, evenings, weekends, and holidays, • Perform work in heavy industrial/shipyard setting with exposure to heat, cold, and humidity, industrial odors, fumes, gasses, chemicals, oil, grease, smoke, dust, noise, and vibration, and involves climbing ladders and stairs, using pneumatic tools, working in cramped quarters, and working with moving machinery, • Maneuvering in tight places, uneven floors, • Climbing up and down ladders, ramps and stairs, • Standing for long periods of time, • Occasionally requires twisting, turning, bending, climbing, and walking over uneven surfaces, • Ability to sit, stand, bend, reach, kneel, twist, pull, push, grip, and climb., • Lifting and moving objects weighing up to 50 lbs. continuously;, • Candidates must reside on Oahu, Hawaii., • Must show proof of your legal right to work in the United States, • This position requires US Citizenship due to security clearance required for base access, • Must be able to successfully obtain a Transportation Worker Identification Credential (TWIC), • Must be able to successfully obtain a Defense Biometric Identification System (DBIDS) Credential to gain access to federally controlled work sites, • All candidates must submit to and pass a post-offer drug screening, physical test and background check before employment begins. Failure to complete any of these steps will result in disqualification, • Valid State of Hawaii REAL ID-Compliant Drivers’ License in good standing or a valid U.S. Passport in addition to a valid Hawaii Driver’s License, if you do not have a REAL ID-Compliant Driver’s License, class 3 or higher This job description in no way states or implies that these are the only duties to be performed by the employee filling this position. Employee will be required to follow any other job-related instructions and to perform any other job-related duties requested by management. Management has the right to add to, revise, or delete information in this job description. This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship. Company DescriptionPSI is the largest privately owned shipyard in Hawaii, with two of the largest dry docks in the state. We have been in business since 1944 and have a large labor force of skilled craftsman with a full support staff of professionals who comprise of engineering, project management, QA, EHS, accounting, contracts, and human resources. PSI offers over 80 years of experience performing maintenance, overhaul, and repairs of all types of marine vessels, assets, and facilities. Please visit our Careers page for our job opportunities: is the largest privately owned shipyard in Hawaii, with two of the largest dry docks in the state. We have been in business since 1944 and have a large labor force of skilled craftsman with a full support staff of professionals who comprise of engineering, project management, QA, EHS, accounting, contracts, and human resources. PSI offers over 80 years of experience performing maintenance, overhaul, and repairs of all types of marine vessels, assets, and facilities.\r\nPlease visit our Careers page for our job opportunities:

Job Description Classification: Non-Exempt Hourly base pay: $25 We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers’ manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230 volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Job Description Welder - $28/HR Full Family Medical HTM Contractors, Inc. | Honolulu, HI We are currently seeking a Welder to become an integral part of our team! The Welder will use specialized equipment to weld and repair equipment, trucks, roll-off dumpsters, and fabricate various items. Pay & Schedule: • $28 per hour, • Monday to Friday, 7:00AM - 4:00PM, • 100% company-paid medical & dental (employee + family), • 10 paid holidays, • 160 hours PTO annually, • Birthday Pay (after 1 year), • 401(k) with 4% company match, • Profit sharing, • Metlife, • Humble - We learn, not brag, • Teamwork - We've got each other's backs, • Accountability - We own what we say and do, • Solution-Driven - We fix problems, not complain about them, • Manufacture and fabricate various items, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Conduct tests to evaluate weld quality and tolerance, • MIG and Stick Weld, • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workload Online or in person- HTM Contractors. Inc. 130 Ohe St. Honolulu, HI 96813 (Monday to Friday, 7:00AM - 3:00PM) Online: () Email us your application to let us know why you think you’d be a great fit for our team! If you're a welder that values teamwork and a positive environment, you'll fit right in with us. Apply today!

Job Description Our company is growing and we are looking for seasoned Auto Body Technician(s) to join our team! Job description: • Complete dis-assembly of vehicle in order to assist Service Advisors in assessing damage to prepare a 100% Repair Plan, • Ensure all needed repairs identified to eliminate supplements, • Repair damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged fenders, panels and grills; and bolts or welds replacement parts in position and reassemble after parts are painted, • Operate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, etc.), • Repair or replace defective parts, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • You are at least 18 years of age, • High school diploma/GED required, • Valid driver's license, • I-CAR certified a plus, • ASE certified in body repair a plus, • You have the ability to effectively communicate with others, • You are able to multi-task and adapt easily to a fast-paced environment, • You have a personable, friendly demeanor with World Class customer service approach to internal and external customersCompany DescriptionC & H Body and Fender has been a top-rated collision center in Hawaii for over 45 years and have maintained an excellent reputation for reliability, trustworthiness and dedication to high quality workmanship. Our most valuable asset is our Team. Not only do we strive to provide our community with the best possible service but attending to our Team's growth and success is also our priority.C & H Body and Fender has been a top-rated collision center in Hawaii for over 45 years and have maintained an excellent reputation for reliability, trustworthiness and dedication to high quality workmanship. Our most valuable asset is our Team. Not only do we strive to provide our community with the best possible service but attending to our Team's growth and success is also our priority.

Job DescriptionStructural Shipyard WeldersWork Location: In and around Joint Base Pearl Harbor Hickam. Pay: $25-$32 dependent on weld test and interview. Must be eligible to get DBIDS and TWIC, clean background going back 10 yearsProficient in welding SMAW (stick). Knowledge and experience in GTAW (TIG) and Braze. Fluxcore process is helpful but not required. Must pass NAVSEA weld test for higher rates. Will need to pass a 3-position test plate in 2g, 3g, and 4g. All plates will be sent out for RT examinations and approval with our sub KTR.

You will serve as a WELDER SUPERVISOR I in the STRUCTURAL SHOP, PRODUCTION RESOURCES DEPARTMENT of PEARL HARBOR NSY AND IMF.

You will serve as a Welding Supervisor I in the Structural And Fabrication Shop - Code 920 of Pearl Harbor NSY And IMF.

You will serve as a WELDER SUPERVISOR I in the STRUCTURAL SHOP, PRODUCTION RESOURCES DEPARTMENT of PEARL HARBOR NSY AND IMF.

Join us as we continue to maintain the Navy's readiness! We are seeking a Marine Welder/Mechanic to serve on our SEMAT Hawaii team located in Pearl Harbor, HI. This Marine Welder/Mechanic will be responsible for performing welding and mechanical maintenance and training to assist shipboard personnel

You will serve as a WELDER SUPERVISOR I in the STRUCTURAL SHOP, PRODUCTION RESOURCES DEPARTMENT of PEARL HARBOR NSY AND IMF.

Pearl Harbor Naval Base Oahu, HI (On-Site/Office).You will plan work assignments of personnel, equipment, facilitate scheduling qualifications, training, and develop specialized skills and procedures.You will schedule, coordinate and direct the accomplishment of work projects or operation in accorda

Join us as we continue to maintain the Navy's readiness! We are seeking a Marine Welder/Mechanic to serve on our SEMAT Hawaii team located in Pearl Harbor, HI. This Marine Welder/Mechanic will be responsible for performing welding and mechanical maintenance and training to assist shipboard personnel

You will serve as a WELDER SUPERVISOR I in the STRUCTURAL SHOP, PRODUCTION RESOURCES DEPARTMENT of PEARL HARBOR NSY AND IMF.

Send resumes to: , HI This position offers an excellent opportunity for experienced journeymen to work on marine piping systems and contribute to significant ship repair and modernization projects.We want to hear from you if you have expertise in pipefitting and marine syst

You will serve as a welder in the Department of the Navy to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.

Simple Application, Immediate Hire.All Experience Levels Encouraged to Apply.Full Time, Part Time & Seasonal Openings Available.

FedEx - - Responsibilities: Operate equipment for movement of packages/documents/heavyweight, dangerous goods and ULDs safely and efficiently; Assist in buildup/breakdown of pallets containing heavyweight freight; Liaise between company and ULD repair vendor as required; Complete basic and recurren

The Salvation Army (Western) - 91-3257 Kualaka'l Parkway - Responsibilities: Maintain availability to work days, evenings, weekends, and holidays as required.Monitor and manage the work order system to ensure timely completion of outstanding projects.Assist in developing, implementing, and maintaini

UFC GYM - JobID: 100-169141098 [Maintenance Mechanic] As a Maintenance Technician at UFC GYM, you'll: Maintain and repair fitness equipment; Perform routine inspections and troubleshoot issues; Ensure cleanliness and functionality of gym facilities; Assist in setting up and organizing fitness classe

Responsibilities: Operate seated forklift to load pallets from floor to trailer; Prepares slip sheets and shrink-wraps unstable loads; Picks up large debris and sweeps 53 ft x 8 ft area.

Alsco Uniforms - 2771 Wai Wai Loop - Responsibilities: Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems.Troubleshoots electrical issues.Responds to daily maintenance requests in a timely fashion to

Energy Transfer - - Responsibilities: Perform forecourt and backcourt maintenance on fuel dispensing equipment and associated systems; Complete facility walk-through inspections monthly; Update dispatch system with completed work orders; Communicate safety/compliance deficiencies to supervisor; Mai

Walmart Stores - 700 Keeaumoku Street - Responsibilities: Maintain and repair Walmart facilities, equipment, and assets by utilizing multiple craft skills (for example, plumbing, electrical, carpentry, material handling equipment, food equipment) and using hand tools, power tools, and other equipmen

Energy Transfer - - Responsibilities: Perform maintenance, repair and upkeep of Company owned fuel dispensing and convenience store facilities, associated fixtures and fuel dispensing equipment; Troubleshoot and repair fuel dispensing systems, environmental monitoring equipment and associated hardw

Responsibilities: Operate and monitor production line to ensure efficiency; Remove or shift materials and/or finished products to facilitate proper flow; Ensure package and product quality; Perform preventative maintenance; Keep daily records of down time and machine operations.

Summary This is a public notice flyer to notify interested applicants of anticipated vacancies.Applications will not be accepted through this flyer.Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered.There may or may not be actual vacancies f

Responsibilities: Operate and monitor production line(s) to ensure efficiency; Remove or shift materials and/or finished products to facilitate proper flow; Ensure package and product quality; Perform preventative maintenance; Operate all manufacturing equipment (including new technologies) efficien

Join Kualoa Ranch Hawai'i, where history, culture, and natural beauty come together in one of the most extraordinary places in Hawai'i.With diverse operations and a deep commitment to our land, community, visitors, and each other, we honor our proud legacy while building an exciting future.Be part o

At Hickam Communities, we turn housing into homes.We recognize that our team members are responsible for our growth and success, and we challenge them to constantly be their best in our fast-paced workplace.We value results, teamwork, innovation, and mutual respect.Come join our team and be part of

Position Title: Marine Pipefitter.Reports To: Pipefitter Superintendent.Relocation Assistance will NOT be offered for this position.PSI is the largest privately owned shipyard in Hawaii, with two of the largest dry docks in the state.We have been in business since 1944 and have a large labor force o

Job Category: Thrift Stores - all positions.Requisition Number: SALES012485.Location: HON Honolulu Store 8, Honolulu, HI 96817, USA.The Salvation Army (TSA) Adult Rehabilitation Center (ARC) is a no-fee program to assist men & women in their journey to complete our rehabilitation program.We are grat

Hata has proudly supported Hawai'i's foodservice industry as a trusted, locally owned, family-run business.Our legacy is built not only on excellence, but on lasting relationships, tradition, and a deep commitment to our community.Hata, we're dedicated to providing a purpose-driven workplace where e

Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.Applicants will only be considered for positions within their own UIC.For example: if you are within UIC 4523A, you will

Sales Assoc/Material Handler- Kailua Store.Job Category: Thrift Stores - all positions.Requisition Number: SALES021773.The Salvation Army (TSA) Adult Rehabilitation Center (ARC) is a no-fee program to assist men & women in their journey to complete our rehabilitation program.We are grateful for the

Are you looking for a place where meaningful moments are made together? At Aqua Aston Hospitality (AAH), we make vacation dreams come true for travelers around the world in a supportive, friendly, and beautiful work environment.For a complete understanding of this opportunity, and what will be requi

Employee ownership at Weston is a path to professional growth and access to diverse opportunities in a highly connected community that works together across key service areas to make a difference in the environment.Weston has continued to evolve and adapt to our changing world as a premier provider

The Material Handler will possess a thorough understanding of Utility Worker functions.Under the guidance of Production Managers, Supervisors, and Leads, the Material Handler will be responsible for moving and scanning items between locational bins using a scan gun to ensure 100% accuracy and accoun

You will serve as a PIPEFITTER LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.Applicants will only be con

Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.This position is located in the Pipe Shop (Shop 56).Applicants will only be considered for positions within their own UIC.For example: If you are withi

Operates seated forklift, loading pallets from floor to trailer.Prepares slip sheets and shrink-wraps unstable loads.Picks up large debris and sweeps 53 ft x 8 ft area.We offer a comprehensive package of benefits including paid time off, health benefits (medical/dental/vision/hearing aid/pharmacy/be

Rigging Work (Forklift Operator).You will serve as a RIGGING WORK (FORKLIFT OPERATOR) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate M

This is an operations position responsible for stocking received merchandise in the appropriate location, operating and maintaining equipment associated with warehouse activity and performing other related duties as required.Essential skills and knowledge:.Ability to read a limited number of two and