Electrical jobs in Overland Park, KansasCreate job alerts

Overview: To direct, oversee and coordinate all phases of maintenance and construction at Worlds of Fun, Oceans of Fun and Worlds of Fun Village including mechanical, electrical, HVAC, landscaping, electronic, carpentry, painting, fiberglassing, and plumbing. Responsibilities: -Participates in long-term construction planning for new park projects. Oversees all construction projects. Negotiates contracts for, schedules and coordinates contractors, engineers and architects supplying services and/or materials to ensure completion of maintenance and construction projects on time and within budget. Helps establish scope of work and makes sure contractors provide the required work in a timely manner. Coordinates details of construction projects with the directors and/or managers of other departments as appropriate. Works with Cedar Fair Corporate to make sure that projects are completed on time, on budget and as designed. -Oversees and participates in the selection, training, scheduling and supervision of all Maintenance employees to make sure they are knowledgeable of and proficient in proper procedures including those involving safety issues. Ensures strict compliance with all federal, state and municipal labor laws as well as with any collective bargaining agreement(s) in force. -Manages employee performance utilizing all appropriate means including training, coaching, counseling and performance management. Addresses and fairly resolves employee problems including union grievances within the frameworks of the collective bargaining agreement and company policies. Participates in collective bargaining agreement negotiations. -Communicates division status to Vice President & General Manager on an ongoing basis, including operational issues, employee concerns, guest complaints, special requests, losses and any other unusual situations in order to maintain smooth operations. -Directs and participates in the the preparation of all labor, operating expense, capital and EWO budgets for the division. Monitors financial reports regularly and takes corrective action when needed. -Regularly and accurately reports to management the status of all projects being supervised. -Communicates with manufacturers and other outside vendors to resolve difficulties and to ensure the safest possible operation and maintenance of rides, attractions and equipment. Communicates with Cedar Fair Safety/Engineering on ride-related issues and to provide needed assistance. Researches, bids and oversees the procurement of materials and/or services involved in maintenance and construction projects. -Interfaces with (and may act as the Worlds of Fun representative with) various governmental agencies on a routine basis to ensure park's compliance with federal, state and local laws and regulations. These agencies include OSHA, EPA, Missouri Department of Natural Resources, and the Missouri Fire Safety Department, as well as the KCMO Planning & Development and Public Health Departments. -Develops and implements a plan to ensure that all park property, facilities, rides, landscape, and equipment are installed, maintained and, when necessary, repaired in a safe, reliable and cost effective manner. This includes: * inspecting all areas of the parks to identify issues * determining priorities * determining materials needed and negotiating purchase terms * assigning schedules * selecting outside contractors * Installing a preventative/predictive maintenance system so that safety and uptime are maximized. * Ensuring the parts warehouse has the proper inventory levels. Establishing min/max levels to those parts inventories to maximize uptime. * Ensuring all maintenance employees are properly trained to perform maintenance on the rides. This includes specialization, preventative maintenance and timely repairs of good quality. Qualifications: Strong interpersonal, verbal and written communication and analytic skills. Demonstrated mental and emotional capability to make sound decisions quickly during emergency situations. B.A. Engineering, Sciences, or Project Management 6-10 years of experience in theme/amusement/water park maintenance Extensive knowledge and understanding of electrical, mechanical, and structural maintenance including applicable codes Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law. Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law. Ability to work nights, weekends and holiday periods to meet business needs. Driver's License

Overview: William Charles Construction, a MasTec Company, is in search of a Project Manager to support transportation construction projects in the electrical construction industry. This role can be based in either our Indianapolis, IN or Rockford, IL offices. Must be capable of up to 25% travel (e.g. 1 week or 5 days/month) by automobile (as driver and passenger), commercial airlines, rental vehicles and public transportation and be able to lodge in public facilities. Travel will be necessary to conduct the duties of this job, and the employee must have the ability to drive and have proper licensing. Company Overview With more than a century of exceptional work on our resume, William Charles Construction remains guided by the pursuit of excellence. Our “Do it Right the First Time” work ethic has been the cornerstone of our business philosophy since 1892. With our broad background in heavy civil construction, environmental management and mining and materials production, we have the expertise to help our customers complete their most complex projects. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. Our industrial expertise includes building products manufacturers, decarbonization, power generation facilities, manufacturing plants and mining. In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Our renewables sector focuses on solar, wind and battery storage. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Responsibilities: • Partner with safety to ensure safety programs are established and executed, • Financial monitoring and reporting including cost monitoring, cost and revenue projections, change order logs, under/overbilling reports, invoicing, vendor and subcontractor invoicing review and approval, • Work with project superintendents to identity applicable equipment types, personnel skill sets, means, methods, and schedule as required, • Manage and update receiving and yield reports, • Maintain cost accounting, schedule impacts, fully authorized change order logs, and communication logs, • Submit monthly cost to complete projections, • Weekly quantities reported and complied in ViewPoint, • Keep change order log up to date, • Subcontract committed costs tracking, • Estimating review to understand strategies, risks, and opportunities, • Pre-construction planning with project team, • Review and procure any permits or licensing required, • Sub-contractor scope and schedule review, • Project documentation including submittals, RFI’s, meeting minutes, work plans, • Project closeout including final documentation, invoicing, retainage release, • Building relationships in local marketplaces, • Interaction with project team, business leaders, and management, • Other duties as assigned Qualifications:, • Bachelor’s Degree in Civil Engineering Construction Management, or related field preferred), • At least 5 years industry experience, overseeing multiple projects simultaneously, • 5+ years of experience working on transportation projects, • Previous experience with Procore, Build2Win, and/or P6 a plus, • Ability to read and understand of contracts, • Strong analytical skills, • Detail oriented and good organization skills, • Ability to communicate well with others, both written and orally, • Proficient in Computer applications such as Microsoft and time reporting systems, • Functional knowledge of job cost accounting, • Thorough understanding of CPM scheduling What's in it for you: Financial Wellbeing • Competitive pay commensurate with experience, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at ___. #LI-DS1 #LI-Hybrid Appcast (For Export): #appred

Job DescriptionDescription: Seeking a full-time Maintenance Supervisor for an apartment community in Overland Park, KS. This is an amazing opportunity with a company that values it's team mates and company culture. Rental housing discount available if living on site. About Horizon Horizon is a fast-growing property management company that owns and operates over 50 apartment communities nationwide. Horizon is based in Seattle and is ranked as one of the top 15 student housing operators. Their vibrant culture, passion for people over process, and innovative growth mentality make Horizon a top-tier company to work for. Horizon invests in their teammates through continued training and education to prepare their people for growth when the next opportunity arises. Horizon places a priority on their teammates' health and well-being which are reflected in their work/life balance, a rich benefits package, and wellness programs. Check out our careers page to learn more: Horizon's mission is to provide every client with unmatched service, respect, and integrity delivered with a sense of warmth, teamwork and company spirit. Job Description The Maintenance Supervisor reports to the Property Manager and oversees all the maintenance needs, physical appearance, and service requests on the property while working within the allotted budget. The Maintenance Supervisor's primary responsibilities are hands on maintenance of the property including general upkeep and repair to units and the grounds, ensuring the service request tracking system is used and followed up with properly, turn and make ready processes run smoothly, supervising the maintenance team, and maintaining excellent resident relations through superior customer service. On call and some weekend availability required. Your job responsibilities are included but not limited to items listed below. At Horizon, we believe in teamwork and going above and beyond in our position to accomplish results.* Requirements: ESSENTIAL DUTIES AND RESPONSIBILITIES • Maintain positive resident relations through superior service, • Participate in the daily operations of the property, • Supervise the Maintenance Team, • Inspects the grounds, buildings and other community features various times throughout the day to identify, minimize and correct hazardous property conditions, liability concerns, and maintains exceptional property appearance in line with HRA standards., • Fulfills resident service requests in accordance with HRA policy while maintaining superior customer service., • Trains the Maintenance team on HRA standards for maintaining exceptional property appearance and fulfilling resident service requests. Monitors service request turnaround time and responsiveness, and immediately corrects if HRA standards are not being met., • Performs unit inspections to determine move-in readiness after move-outs, and assist with make ready processes prior to new resident move-in both throughout the year and during turn season., • Assists Property Manager with creating turn make ready board, key replacement process, vendor key system and all other turn related processes, such as ordering turn supplies/appliances for the units in a timely manner while remaining in line with the allotted budget. Additionally, oversees vendor negotiation, scheduling and contracting., • Lifts and work with heavy equipment as needed., • Supervises the Maintenance Team; Interview, hire and train maintenance team for property location. Plans and organizes tasks for all technicians and porters before the start of each shift. Additionally, conducts performance evaluations that are timely and constructive., • Manages and maintains a preventative maintenance program that extends the life of the community while minimizing future repairs., • Maintains well-organized and properly stocked maintenance shop while adhering to safety standards, OSHA guidelines and remaining in line with allotted budget., • Performs hands on maintenance while overseeing the maintenance and repairs of electrical, plumbing, heating, ventilation, air conditioning (HVAC), carpentry, painting, drywalling, appliances, and other building systems., • Performs Maintenance callbacks of assigned service requests., • Designs, implements, and executes in-house and/or capital projects as assigned by Property Manager or Corporate team. Assists with department budget estimates and costs of specific repair projects., • Ensures consistency in dealing with residents on all matters. Complies with all federal, state, and local laws relating to Fair Housing., • Performs after hour and/or weekend "on call" duties as assigned. COMPENSATION We offer an excellent compensation packet including a very competitive salary (DOE), bonus potential, health, dental, and vision insurance, life insurance, disability insurance, 401k, paid time off, paid holidays, flexible spending account, HSA, etc. Hourly Wage: $30-32 DOE, plus bonus. Rental housing discount of 20% offered if living on site. Equal Opportunity Employer (EOE) PM21 PId12230aecbff-25405-37951379

Job Description Equipment Technician – Welding Operations Kansas City Area | $70K+/+Per Diem | 30% Travel Required Why You’ll Love This Role Join a growing company that specializes in welding operations and get paid to travel! We’re looking for a hands-on Equipment Technician who’s ready to repair, maintain, and troubleshoot specialized welding equipment. This is a great fit if you have strong mechanical skills, like solving problems on the fly, and don’t mind rolling up your sleeves in tough environments. What’s In It For You: -Competitive pay: $70K+ -Overtime pay: time-and-a-half & double-time opportunities -Travel perks: per diem + paid travel time -Full benefits package (medical, dental, vision, 401k, holiday pay, disability & life insurance, FSA) -Site Work (local): Mon–Fri, 8-hour shifts -Field Work (travel): Extended travel assignments, 12-hour shifts, typically 7 days/week during projects What You’ll Do: This is not a welding position, it is maintenance for weld equipment: -Keep weld overlay machines running with preventive maintenance & repairs -Diagnose & fix mechanical, electrical, and operational issues -Calibrate and test equipment to meet quality standards -Set up and install welding equipment for major projects -Travel to client sites for multi-week assignments (30% of time) -Manage tools, parts, and supplies -Follow and enforce strict safety standards What We’re Looking For: -Must live in the Kansas City area (local + travel required) -At least 1 year of hands-on work experience (construction or industrial environment preferred) -Comfortable using tools & equipment in the welding industry -Willing to work in heavy construction environments (climbing, tight spaces, noisy sites) -Strong mechanical skills & troubleshooting mindset -Team player who embraces company culture Company DescriptionWe partner with local businesses, in all industries, to help match the clients needs with candidates who are ready to find their next career. We have dedicated teams that specialize in office services, professional/direct hire, light industrial, manufacturing, search among others. Express Employment Shawnee/Olathe are a part of a network of 830 individually owned offices in US and Canada with far reaching recruiting abilities. Please trust us to find your next dedicated employer.We partner with local businesses, in all industries, to help match the clients needs with candidates who are ready to find their next career. We have dedicated teams that specialize in office services, professional/direct hire, light industrial, manufacturing, search among others. Express Employment Shawnee/Olathe are a part of a network of 830 individually owned offices in US and Canada with far reaching recruiting abilities. Please trust us to find your next dedicated employer.

Job DescriptionAre you seeking purpose, challenge, and talented colleagues? With a diverse portfolio of commercial, retail, hospitality, multi-family, and light industrial programs, CESO has the opportunity for you to develop your career. We develop leaders and empower our associates to use their skills and talents to positively impact the world through service – to our coworkers, clients, and communities. We subscribe to the mission of “finding purpose through serving others,” so if this speaks to you, let’s connect! At CESO, the Electrical Project Designer I demonstrates the ability to perform a wide variety of technical assignments independently with little or no oversight for small, intermediate, or large projects and completes all necessary tasks on assigned projects so projects finish on time, within budget and consistent with industry production and care standards. The Project Designer I will continuously seek opportunities to learn and develop within the discipline with senior staff support.Primary Responsibilities • Begin to take responsibility for project designs under the Engineer of Record supervision with senior staff oversight., • Communicate design requirements and assist project managers with project coordination and facilitation between architects, contractors, other engineers, equipment manufacturer representatives, and other team members to determine project scope, feasibility, and equipment needs, and provide operating procedures and technical information., • Attend and participate in owner, client, or architect meetings as needed and visit project sites to verify existing conditions and/or observe construction progress., • Participate in client, company, and industry events to build and maintain professional relationships., • Consistently maintains proficient understanding of industry standards and regulations., • Perform calculations, develop design approaches and concepts, design engineering system(s), and fulfill other duties as assigned through collaboration with junior and senior staff, and Engineer of Record approval., • Create intermediate to advanced system layouts, detail drawings, schematics, and schedules using Revit, AutoCAD or other software., • Model lighting system luminaires (based on photometric calculations), controls, and circuiting for normal and emergency lighting., • Model power systems circuiting and feeders for receptacles, equipment connections, and power distribution., • Develop panel loading, service loading, voltage drop, and fault current calculations., • Model components for telecommunication, fire alarm, security, and lighting protection systems., • Help prepare and modify studies, plans, reports, specifications, and project designs., • Reviews work for technical accuracy and completeness prior to final QA/QC review., • Reviews Shop Drawings and Equipment Submittals for conformance to plan documents and project specifications., • Performs other duties as assigned.Position Requirements, • Bachelor’s degree in Electrical or Architectural Engineering from an ABET accredited college or university and 5 or more years of relevant experience is preferred; Or 7 years of relevant design experience without a degree is required., • Master’s degree in Electrical or Architectural Engineering, or similar discipline, can substitute up to 1 year of work experience., • Advanced knowledge and proficiency in engineering design, AEC industry, codes and standards is required., • Completion of Fundamentals of Engineering Examination (FE) and certification as an Engineering in Training (EIT) with a state licensure board is preferred., • Computer skills necessary to enter daily timesheet data and use Microsoft Outlook for email correspondence., • Advanced knowledge of Microsoft Office Suite, AutoCAD, Revit, Visual Lighting, SKM Power Tools, and BlueBeam Revu., • Travel may be up to 25% as directed by supervisor. Benefits and Perks, • Flexible and Hybrid Work Schedule, • Paid Time Off – Credited to You 100% Upfront, • 401K with a Company Match, • Rewards and Recognition Program, • Training and Development to Foster Professional Growth, • Paid Holidays, • Medical / Dental / Vision Coverage, • Welcome Box, • Casual Dress Code, • Reimbursement for Professional Licenses, • Paid Time Off for Community Team Service Events, • Voluntary or Supplemental Short-Term / Long-Term Disability, • Employee Assistance Program, • Company Paid Bonding and Recovery

Job Description Who is Tech Electronics? We provide systems and services that help our customers work smarter, feel safer, and collaborate more effectively. Tech Electronics is a technology services organization headquartered in St. Louis, Missouri with seven offices across the Midwest. At Tech Electronics, we specialize in low voltage life safety and communication systems in the education, healthcare, construction, government, commercial-industrial, SMB, and worship industries. From fire alarm installation and testing to security cameras and video surveillance, our tailor-made solutions deliver connection and protection. Why Tech Electronics? At Tech Electronics, we pride ourselves on bringing a unique family atmosphere to an ever-evolving technology marketplace. We recognize that our people made us special when we opened our doors nearly 60 years ago, and they continue to do so today. We prioritize giving motivated individuals opportunities to find their gifts, develop their talents, and live their lives to the fullest. If you're looking for a job that's more than just a job, our Tech family is waiting for you! What's in it for you • EXCELLENT WAGES, • Health, Vision & Dental Insurance on DAY ONE, • Paid Time Off & Accrued Personal Time, • Tuition Reimbursement, • Long term & Short-term disability, • Generous Holiday Schedule, • Hybrid office schedule (select positions), • Immense Growth Opportunities, • Relaxed Family Culture, • Teladoc, SurgeryPlus, & other medical benefits What you'll do as a Fire/Security Technician • Oversees & assists with all cable, device, & head-end installations, • Performs programming of systems at project site checkout & testing of the installed systems, • May perform installation of fire, access control, video surveillance, intrusion detection, infant abduction and wandering patient systems at customer or project sites, • Provides customer service to end user or electrical contractor of assigned job What is need or preferred as a Fire/Security Technician • Minimum of one year of systems service experience, • Customer service & strong communication skills, • Lenel or NICET certifications preferred, • Technical/ hands on skills preferred, • Valid Driver's License - Class C, • Weekend standby rotation required We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We are a drug free workplace. Employment is contingent on passing a drug test.

Job Description Supporting PAR Electrical Contractors Posted by Vector Talent Solutions Location: Lenexa, KS Employment Type: Full-Time About the Opportunity Vector Talent Solutions is proud to partner with PAR Electrical Contractors, a nationally respected leader in power infrastructure construction and utility services. PAR supports complex electrical and energy projects across the country and is seeking a detail oriented Accounts Receivable Administrator / Billing Specialist to join their team. This role is essential to the accuracy and integrity of project billing. The ideal candidate has strong analytical skills, excellent communication, and the ability to maintain accuracy in a fast paced work environment. Position Overview The Accounts Receivable Administrator / Billing Specialist will support PAR’s accounting and project management teams by preparing, auditing, and submitting invoices in accordance with contract terms. This position ensures accurate revenue reporting and helps maintain financial alignment across multiple projects. Key Responsibilities • Collect and organize information required to calculate billing based on contract terms., • Enter billing data accurately and on time, then route for internal review., • Audit invoices for correctness, compliance, and proper backup documentation., • Assist in monitoring outstanding project balances, receivables, and change order activity., • Communicate with project managers regarding costs, billing status, and required documentation., • Distribute invoices to customers according to each contract’s specifications., • Maintain spreadsheets, files, and records related to billing, financial reporting, and documentation., • File invoices and supporting documents to maintain complete and auditable records., • Respond to customer and employee questions regarding bills, charges, or invoice status., • Provide reminders and follow ups related to payment processing., • Collaborate with field personnel and customers to resolve billing discrepancies., • Contribute to team objectives and support related administrative tasks as needed., • Strong comfort level working with numbers, financial data, and contract driven billing., • Problem solving ability with the initiative to prioritize tasks and meet deadlines., • Excellent communication and interpersonal skills., • Experience with Microsoft Word, Excel, and Outlook., • Preferred: Degree in Finance, Accounting, Business Administration, or a related field., • Ability to manage stress and maintain accuracy in a fast paced work environment., • Medical, dental, and vision insurance., • Retirement savings plan with company sponsored options., • Paid time off and paid holidays., • Life and disability insurance offerings., • Employee assistance resources and wellness support., • Additional voluntary benefits based on employee choice. Specific benefit details will be provided directly by PAR during the hiring and onboarding process. Why Work Through Vector Talent Solutions • Opportunity to support a highly regarded contractor serving critical infrastructure needs nationwide., • Professional support and communication throughout the recruiting process., • Transparent guidance from an experienced recruiting team.

Job Description Description Paradigm Power Delivery, a Babcock Power company, is a company whose mission is to build electrical substations and construct or repair electrical power lines while providing high quality, efficient service to our customers, and a safe, healthy work environment for our employees. We strive to give our customers the kind of service and quality product that we would want if we were that customer. Likewise, we want our employees to have the kind of job that we ourselves would appreciate. In a word, that’s our paradigm. Why Paradigm? This is your opportunity to join a high growth industry company where you will partner with our elite industry leaders to drive results and build out a successful power delivery business. This could be your career-defining move. As our Director of Engineering, you’ll play a pivotal role in building an engineering organization, overseeing project design, optimizing design strategies, and ensuring our engineering teams deliver high-performance, scalable, cost-effective solutions in power delivery construction. Advise management and lead efforts in the design, specification, and review of technical documents required for the permitting and construction activities of substations, transmission lines, distribution lines, and energy storage facilities. • Participate in the development of the strategic business development plan and the yearly business strategy., • Develop and implement engineering best practices., • Development and implement standard engineering processes in accordance with industry standards and business goals and objectives., • Ensure compliance with industry standards, regulations and safety requirements., • Collaborate with project management, estimating, procurement, and business development teams to align engineering efforts with strategic business goals., • Provide estimates of the activities, schedule and resources required to complete a project., • Provide technical advice, technical risk assessment and problem resolution in area of functional responsibility, • Manage the day-to-day operational activities of the department, • Actively participate in trade and technical associations., • Ensure successful execution for all projects. Requirements • BS in Engineering or related discipline., • Deep understanding of transmissions, distribution, substations and power systems., • Twelve plus years of engineering design experience with at least 8 years in power delivery., • The ability to balance technical excellence, cost efficiency, and project deadlines., • Experience working with Utilities in Power Delivery., • Exposure to the renewable energy market is preferred., • Health Care Plan (Medical, Dental & Vision) Effective your first day of employment!, • Wellness Programs and Awards Get healthier while earning discounts to your premiums!, • Gym Reimbursement and Weight Loss Benefit, • Retirement Plan (401k, IRA) Full match up to 4% effective your first day of employment!, • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation & Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Training & Development, • Employee Assistance Program, • Flexible Spending Accounts, • Eligible for annual bonus Our benefits cover you and your family on day one! In addition to medical and dental and vision coverage, we offer vacation pay, holiday pay, 401K match, wellness awards, and so much more! This position is eligible for relocation assistance.

Job DescriptionP1 Service, LLC, is seeking a General Manager, Facilities Maintenance Operations (FMO) for our corporate office. Join our P1 Team! P1 Service, LLC., part of the BCTS family of facility solutions providers, provides customers with the best in HVAC, mechanical, electrical, and plumbing service. Our turn-key solutions for all types of building solutions in a variety of markets has made P1 Service one of the top contractors in the nation. When you work for P1 Service, you'll be part of a culture that puts safety first, treats associates like family, and provides challenging work in a rewarding, energetic environment. P1 Service takes pride in maintaining a high standard of excellence along with an ethical and friendly business culture. P1 Service, LLC. is an equal opportunity employer. All qualified applicants will receive consideration for employment, regardless of status, including status as a protected veteran or as an individual with a disability. The Opportunity We're seeking a dynamic General Manager, Facilities Maintenance Operations (FMO) to lead our growing FMO business unit and drive strategic commercial growth. This leadership role combines strategic planning, business development, and operational excellence, making it perfect for a results-driven facilities management professional who thrives in both client-facing and operational environments. Reporting to the President of P1 Service, LLC, you'll be a strategic member of our leadership team with overall responsibility for the business unit's continued growth and expansion. What You'll Do Strategic Leadership & Business Development • Manage and optimize the FMO Service unit P&L, • Lead commercial growth and business development initiatives, including identification and acquisition of new customer accounts, • Serve as overall leader for P1 Service's existing FMO clients, ensuring account retention and expansion through exceptional customer service, • Develop and implement facilities strategies aligned with organizational goals, • Develop and evaluate multiple strategies considering future strategic objectives, institutional needs, and community development initiatives Operations Management • Oversee customer maintenance to ensure 24/7 operation and regulatory compliance, • Manage capital projects, renovations, and budgets, • Implement sustainability initiatives to enhance energy efficiency, • Supervise vendor and contractor relationships for quality service, • Develop emergency preparedness and disaster recovery plans, • Develop and maintain standard operating procedures (SOPs) for all FMO service delivery Performance Management & Metrics • Develop and monitor key performance indicators (KPIs) that improve critical metrics bringing value to customers, • Track and improve critical metrics including planned vs. reactive maintenance ratios (target 80:20), cost per square foot, and energy efficiency improvements, • Establish preventive maintenance schedules and ensure 95%+ compliance across all client sites, • Lead root cause analysis for equipment failures and implement corrective action plans, • Maintain customer inventory and procurement strategies for optimal parts availability and cost control Team Leadership & Development • Mentor and manage facilities teams to drive continuous improvement, • Support ongoing staffing and team development needs, • Develop staffing models that support departmental goals and objectives, • Continuously develop personnel through mentoring, coaching, and leading by example, • Manage conflicts, develop healthy and productive teams, and inspire and motivate teams to excel Financial Management • Develop annual budgets for each client account and track monthly financial performance, • Identify cost optimization opportunities while maintaining service quality standards, • Manage position responsibilities within defined budgets and adhere to operating budgets, • Establish program parameters, facility requirements, and target values for the capital budget Client Relations & Communication • Develop, collaborate, edit, and finalize presentations for executive leadership, trustees, and donors, • Present and support presentations at the highest level of executives, • Respond to strategic demands, initiate consultative services, and act as focal point for Facilities departmental objectives, • Assess and manage risks effectively to protect the organization's interests Requirements and Qualifications Required: • Bachelor's degree in Business Administration, Facilities Management, Engineering, or related field, • 12+ years of progressive facilities management experience, including 7+ years in leadership roles, • Demonstrated success in business development, client acquisition, and relationship management, • Proven track record of managing client portfolios and driving service expansion, • Experience developing and implementing strategic account management plans, • Strong financial acumen with expertise in P&L management and service pricing models, • Excellent negotiation and contract management skills, • Experience leading multi-disciplinary teams across multiple client sites Preferred: • Master's degree in Business Administration, Facilities Management, or Engineering, • Professional certifications such as CFM (Certified Facility Manager), FMP (Facility Management Professional), or PMP (Project Management Professional), • Experience in a facilities management service provider or property management company, • Proven success growing service contracts by 20%+ annually, • Experience with CRM systems and business development analytics, • Background in developing innovative facility service offerings, • International facilities management experience, • Industry recognition or leadership roles in professional associations Benefits for fulltime non-bargaining personnel include: • Educational Assistance program, • PTO and holiday pay, • Volunteer community service paid time off, • Bereavement paid time off, • Company paid life insurance, • Company paid disability insurance, • Company paid Employee Assistance Program with counseling, • Company paid financial education & wellness program with budgeting resources, • 401K retirement plan, • Health with HSA, Dental, and Vision insurance, • Dependent Care FSA, • Voluntary Life insurance, • Voluntary Hospital Indemnity, Critical Illness, and Accident insurance plans, • Voluntary LegalShield and Identity Theft protection plans, • Employee Discounts Work Environment • Office-based with regular client site visits, • Standard business hours: Monday-Friday, 8:30 AM - 5:00 PM, with flexibility required for client relationships, industry networking events, and urgent facility matters, • Travel required to visit client sites, evaluate new business opportunities, and represent the company at industry conferences, • Mix of executive office work, client meetings, and field inspections across multiple facilities If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting Human Resources: Email: or call: 913-529-9033. Ready to Join Our Team? If you're passionate about leading facilities management operations while driving business growth and delivering exceptional client service, we want to hear from you! To Apply: Visit our website at If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting Human Resources: email or call: 913-303-9033. Powered by JazzHR PSKQ8ERmfU

Job Description PDT - TL2 / Power Delivery Transmission and Distribution Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Mesa seeks a Senior Transmission Engineer focusing on renewable energy projects who will work with other engineering team members to deliver projects of varying complexity and size for our renewable Transmission Line clients. The ideal candidate will have the following skills, knowledge and abilities: • Work will be fast-paced with aggressive project schedules., • Leading or collaborating with the Design Team to ensure assigned tasks are completed on time under aggressive project schedules., • Applying advanced engineering principles to produce accurate and precise calculations and design deliverables., • Knowledgeable of transmission and distribution materials associated with basic, intermediate, and complex project designs., • Ability to develop transmission line design standards or custom designs supporting renewable energy clients., • Utilizing design software to create designs that are compliant with all codes and client standards., • Performs material selection and takeoffs for basic, intermediate, and complex project designs., • Review and understand project specifications, requirements, and standards., • Coordinate with other team members to ensure design intent is transferred to the design drawings., • Establishes, promotes, and assures quality on all projects and work performed., • Provide quality workmanship for all projects and work performed., • Promotes and supports a safety culture within group and demonstrates safe work practices into designs., • May provide technical oversight on basic and intermediate project tasks., • Mentors and coaches Engineers and Engineering Associates as needed. ACCOUNTABILITY • Performing engineering calculations for basic, intermediate, and complex designs and transmission line standards., • Quality of work assignments., • Meeting deadlines set by the Project Manager and/or Project Lead., • Follows up on construction issues in support of the engineering team to resolve problems and concerns in a timely manner., • Performs work within the scope of a project - meeting timelines and cost projections and reports discrepancies in a timely manner., • Checking or reviewing basic and intermediate designs with a high attention to detail. AUTHORITY • Make engineering recommendations to higher-level Engineers and Group Leads for review., • Supports projects, when required, to ensure schedules, work scopes, and budgets meet the clients’ and Mesa’s expectations., • Identify quality or technical performance issues., • Provide suggestions to improve performance., • Identify Safety related issues., • Make decisions on discrepancies found during the check and reviewing process., • Create transmission line standards or custom designs in support of renewable energy projects. COMPETENCIES • Ability to identify, analyze, and solve technical problems related to transmission systems., • Ability to perform engineering calculations needed to support basic, intermediate, and complex designs and transmission line standards., • Strong attention to detail and accuracy in engineering and design work., • Advanced proficiency in AutoCAD and other drafting software., • Great interpersonal skills and aptitude for developing a working relationship with the entire design team., • Excellent verbal and written communication skills and ability to work with others., • Ability to meet deadlines and manage multiple tasks simultaneously in a fast-paced environment., • Willingness to develop, promote, and comply with Mesa Safety requirements., • Ability to identify quality issues and comply with Mesa’s quality requirements., • Ability to coach and mentor Engineers and Engineering Associates. EDUCATION AND EXPERIENCE • Four-year Bachelor of Science Degree in Civil, Electrical, or Mechanical Engineering required., • Minimum of 8 years of progressively responsible transmission experience required., • Experience with renewable energy projects is required., • Professional Engineer license required with the ability to obtain multi-state licensure. PHYSICAL AND MENTAL DEMANDS • Prolonged periods sitting at a desk and working on a

Job Description Paradigm Enterprises, Inc., a Babcock Power company, is a company whose mission is to build electrical substations, energy storage facilities, and construct or repair electrical power lines while providing high quality, efficient service to our customers, and a safe, healthy work environment for our employees. We strive to give our customers the kind of service and quality product that we would want if we were that customer. Likewise, we want our employees to have the kind of job that we ourselves would appreciate. In a word, that’s our paradigm. Why Paradigm? This is your opportunity to join a high growth industry company where you will partner with our elite industry leaders to drive results and build out a successful power delivery business. This could be your career-defining move. Paradigm has set up an individual development program that supports the growth of the individual. This may include roles with the estimating team, pre-construction team, engineering team, and/or the construction team. The steps and actions involve with the development program support both Paradigm’s need to develop future leaders internally, as well as provide the individual the opportunity to excel based upon their abilities and desires to take on more responsibilities. As a Project Engineer, you will work closely with and report directly to the Project Manager or Construction Manager and you may be positioned in the office or at project site. If at the project site, you will be expected to be a job-site leader in health and safety, ensuring quality reporting and workmanship, and that all work is completed professionally and ethically. Your main functions will include contract administration, project planning and scheduling, and project reporting, and you will play a key supporting role in Project Management for contractual, legal, and other project issues. If at the office, you will be expected to support estimating, project execution planning, procurement planning, process enhancement, and other pre-construction activities to support the company’s objectives. Main Responsibilities: • Assist in the interpretation of drawings and specifications for field crews and craft supervision, • Perform quantity calculations by taking measurements and determining the percentage of completed/installed materials and work, • Lead the preparation of work plans and work packages, • Assist in field surveying and work layout support, including elevation, control points, and compilation of as-built data, • Assist in compiling, processing, and confirming daily labor timesheets, • Assist in the preparation of Job Hazard Analysis (JHA’s), • Participate in job site safety reviews, toolbox meetings, mass safety meetings, and safety training, • Order and schedule material deliveries, • Supervise field operations, • Majority of projects are located in North Dakota, Minnesota, South Dakota, Arizona, New Mexico, Texas, North Carolina, South Carolina, and Georgia., • Perform material takeoffs from drawings, specifications, and other contract documents, • Perform basic engineering calculations and technical drafting to support field operations, • Assist Project Managers and Engineers to gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use, • Assist in the preparation of purchase orders and subcontracts, performing minor solicitations and purchasing as requested, • Assist in the maintenance of basic project recordkeeping and correspondence functions, including daily reports, photographs, requests for information (RFIs), and memorandums, • Assist with entering data into the job cost system and participate in reviewing cost reports with job site management, • Assist in generating change orders and as-built data to be reviewed by the Project Manager, • Provide field support and supervise subcontractor operations, • Prepare execution plans and work packets for future projects, • Bachelor’s degree in electrical engineering, civil engineering, construction management or closely related field., • Up to 4 years of engineering or construction experience., • Ability to read, analyze, and identify discrepancies in engineering plans, specifications, and contract documents., • Ability to freely access all points of a construction site in wide-ranging climates and environments., • Highly motivated, with a demonstrated passion for learning and taking initiative., • Strong work ethic, willing to do what it takes to get the job done right the first time, • Demonstrated commitment to ethics and integrity., • Passion for safety, with the ability to help us ensure that nobody gets hurt., • Strong communication skills., • Team player with the ability to work independently to meet deadlines, goals, and objectives., • Strong organization, time management, and attention to detail. Our benefits cover you and your family on day one! In addition, we offer vacation pay, holiday pay, 401K match, wellness awards, and so much more! Final offers may vary based on multiple factors, including education, depth and relevance of work experience, relevant licenses and certifications, and may vary from the amounts listed in the job posting. Benefits • Health Care Plan (Medical, Dental & Vision), • Wellness Programs and Awards, • Gym Reimbursement and Weight Loss Benefit, • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Training & Development, • Employee Assistance Program, • Flexible Spending Accounts

Job Description Position Summary - Controls Engineer: Currently seeking a highly skilled Controls Engineer to join a team of high performers in their efforts to help their clients get better, stronger, and faster through automation. In this role, you will be responsible for the design, configuration, implementation, and optimization of industrial control systems, primarily utilizing Rockwell Automation platforms. Your responsibilities will include leading complex projects from design to commissioning, integrating advanced communication networks, ensuring compliance with industry standards and continuously improving system reliability. You will work directly with clients to guide them through system upgrades and enhancements. Appealing Factors of This Opportunity- Controls Engineer: • Ability to work from home as project demands allow, • Limited travel, • Opportunity to be part of an established organization with a strong backlog of work that can provide longevity and stability, • Comprehensive, competitive compensation and benefit package, • Design, program, and troubleshoot process control logic primarily using but not exclusive to Rockwell Automation Control Platforms, including Logix RS5000 and RS500., • Develop and maintain Human Machine Interfaces (HMIs) using FactoryTalk SE, FactoryTalk ME, Wonderware, and Ignition platforms., • Integrate PLCs, DCS, SCADA systems, and associated field devices to ensure seamless operation and data exchange., • Design and configure automation networks, including VLAN segmentation, QoS, and redundant architectures., • Implement communication protocols such as EtherNet/IP, PROFINET, Modbus TCP, and OPC UA., • Configure and manage Cisco/Stratix switches and routers to ensure secure, reliable communication between OT and IT networks., • Collaborate with cybersecurity teams to adhere to best practices and industry standards (e.g., IEC 62443) for securing operational technology environments., • Serve as the lead through all project phases: concept and basic design, detailed design, construction, commissioning, qualification, and final handover., • Serve as a key point of contact for clients, guiding them through system upgrades, modernization initiatives, and technology transitions., • Monitor system performance, identify inefficiencies, and implement improvements to enhance reliability, uptime, and throughput., • Conduct root cause analysis and support predictive and preventive maintenance programs., • Create and maintain detailed documentation, including network diagrams, control logic schematics, device configuration files, test protocols, and standard operating procedures., • BS degree in Engineering (Electrical, Mechanical, Chemical, or related field) or equivalent experience required., • 5+ years of experience working with Rockwell Automation platforms (ControlLogix, RSLogix 5000, RSLogix 500)., • Proven experience with PLC programming, SCADA/HMI development, and OT network design., • Familiarity with Cisco/Stratix network programming and industrial cybersecurity best practices., • Process control experience in industries such as manufacturing, pharmaceuticals, energy, or similar., • Excellent communication and client-facing skills; able to explain technical concepts to non-technical stakeholders.

Job Description Overview Amerit Fleet Solutions, one of the leading fleet maintenance companies in the US, is looking to hire a skilled Diesel Technician/Mechanic in Lenexa, KS! The Diesel Technician/Mechanic is responsible for the timely repair and maintenance of medium to heavy duty fleet vehicles to ensure a safe and efficient operation. The Diesel Technician position requires high level of proficiency and working knowledge related to heavy duty Diesel Engine diagnosis and repair. Comprehension of Fleet Maintenance operations, understanding of electrical, preventative maintenance and DOT inspection experience and knowledge. Compensation: Competitive Hourly Pay - Paid weekly, every Friday! Pay: up to $39/hr, depending on experience 1st SHIFT: Monday - Friday: 5:00am - 1:30pm The benefits of belonging – what’s in it for you? • Competitive hourly pay – paid weekly, every Friday, • Full benefits within 30 days, • Medical, dental, vision, prescription drug coverage, life insurance, disability insurance, • 401(k) match program, • Paid vacation, holidays, and sick time, • Commitment to your safety through boot and prescription safety glasses reimbursement, • Career and learning development with an extensive training program through our Amerit University, • Employee referral program, up to $1,000 bonus, • ASE certification program with fee reimbursement and bonus, • Employee recognition platform that includes opportunities to redeem points for merchandise, • Employee Assistance Program (EAP), • 24/7 nurse triage line, • Employee discounts on cell phone service and entertainment tickets, • Employee resource groups (ERGs) that foster inclusion, • Wellness and fitness programs through our providers Essential Duties: • Perform repairs and preventative maintenance to tractors, trailers, dollies, and switchers., • Perform services to anti-lock brakes, wheel end components, electrical, brakes, minor body work, and roll-up doors., • Prepare vehicle records and report both manually and on a computer, • Perform safety inspections of equipment and prepare safety documentation required, • Comply with all applicable laws/regulations, as well as company policies/procedures, • Inspect and perform work on the under parts of vehicles, • Access any area of the equipment or vehicle to perform necessary maintenance, • Move parts to and from the job site and remove or install these parts on vehicles, • Interact with clients through both email and phone as necessary, • Perform other duties as required Key Competencies: • At least 2-5 years of experience performing vehicle maintenance or must possess auto or diesel technology diploma from an accredited technical school, • ASE Certifications – preferred, • Must have valid Driver’s License- Class C, • Commercial Driver’s License class “A” or “B “preferred, • Proficient computer skills: knowledge of Excel, Word, Fleet Management Systems, and Email, • Strong written and verbal communication skills (documentation, communication with peers, supervisors, etc.), • Must be able to operate a manual transmission vehicle to determine if operating properly, • Must provide own hand tools & toolbox. Working Conditions: • Exposure to heavy traffic areas while performing the duties of the job., • Exposure to considerable amounts of dust, diesel fumes and noise., • Exposure to chemicals, oils, greases or other irritants, • Access any area of the equipment or vehicle to perform necessary maintenance, • Ability to move and position heavy objects, • Ability to bend, stoop, crouch, kneel and crawl to repair vehicles, • Ability to work outside in various weather conditions. Are you ready to advance your career with Amerit Fleet Solutions? Apply Today! #DieselMechanicJobs #FleetMaintenance INDMN

Job DescriptionLightEdge Solutions is developing the IT solutions that will propel businesses forward over the next 10 years. Using a combination of shared and private/dedicated platforms, LightEdge has been successful in offering businesses alternatives that streamline operations, improve reliability and reduce costs.If you are passionate about creating real solutions that help businesses with cutting-edge technology, want to be challenged to think out of the box and be in a position where you can impact change on a daily basis, then LightEdge can offer you a dynamic corporate environment built on teamwork and personal responsibility. Lightedge is an enterprise-grade cloud service and colocation company focused on the needs of businesses and their critical IT requirements. If you want to take your skills to the next level by joining an industry leader, this is an excellent opportunity for you! The Data Center Technician supports the ongoing monitoring and daily management of building systems and physical infrastructure at Lightedge facilities. They utilize standard operating procedures to perform and/or coordinate the routine maintenance and optimization of all building systems, including power, HVAC, biometric security, and fire suppression systems. All work this individual performs must comply with applicable building electrical, mechanical, fire, and environmental codes and company audit requirements. The employee will be a member of the DC Operations team and will report directly to the Facilities Manager.Responsibilities: • Work with other Lightedge personnel, contractors, and vendors to diagnose and troubleshoot problems with data center equipment., • Install servers and networking equipment into racks with associated network cabling., • Work with project managers and technicians to facilitate new client service installations., • Receive and document incoming shipments., • Respond to and resolve alarm events affecting infrastructure and services., • Follow established Change Control processes; review and follow MOPs for Change activities., • Assist in the design layout, installation, and documentation of new racks and cages., • Available for on-call rotation to support non-business hours, oversee preventative maintenance and break/fix activity by vendors, perform routine maintenance, optimize infrastructure, and provide client support., • Develops and maintains comprehensive knowledge of Lightedge physical infrastructure and building systems, including mission-critical power, cooling, and biometric security systems., • Works with clients to resolve cabinet/cage infrastructure issues and power utilization., • Ensure operational efficiencies and best practices toward maintaining availability/ uptime of all 24X7 facilities, mission-critical operations, and infrastructure., • Share technical knowledge and operational experience with team members to enhance professional growth and practical cross-training of the DC Ops and Support teams., • Other duties as assigned.Experience:, • Minimum of two-year technical degree, or 1-4 years equivalent experience in a technical environment or military MOS, • Network cabling termination experience- Ethernet, CAT6, Fiber, • Experience with day-to-day standard maintenance activities in data centers, • Familiarity with telco central office equipment/transport systems., • Robust computer user hardware and software skillset, high proficiency in Microsoft Office Suite, and utilization of web browsers, • Working knowledge of electricity and electrical literature is essential., • General understanding of data center cooling systems and airflow management techniques, • Ability to multitask and prioritize activities in a complex, fast-paced environment., • Strong verbal and written communication skills, • Demonstrated ability to define problems, collect data, establish facts, and draw sound conclusions.

Job Description P1 Construction is seeking Local Union 533 Pipefitter Pre-Apprentices for the Kansas City KS/MO Metro area. Join our P1 Team! P1 Construction has grown into a national construction and solutions provider. P1 is a specialty subcontractor providing HVAC, mechanical, electrical, plumbing, building technologies, controls, millwright, and architectural metal work across the U.S. But there’s so much more to P1’s broad spectrum single-source capabilities, including value-added services like virtual design and construction and multi-trade fabrication. When you work for P1 Construction, you'll be part of a culture that puts safety first, treats associates like family, and provides challenging work in a rewarding, energetic environment. P1 Construction takes pride in maintaining a high standard of excellence along with an ethical and friendly business culture. P1 Construction, LLC. is an equal opportunity employer. All qualified applicants will receive consideration for employment, regardless of status, including status as a protected veteran or as an individual with a disability. We offer a competitive compensation package. This can be a highly rewarding career path for those motivated to learn a trade. A union apprenticeship is an excellent career choice if you like to work with your hands; are willing to serve an apprenticeship for up to five years; have dexterity, mechanical ability, problem-solving skills and the ability to work collaboratively with a team; want to earn a living wage and good benefits; and want the opportunity to advance in your career. Benefits: • Become skilled in a trade and get paid to do it - "Earn While You Learn!", • Full-time employment with career placement built in., • Progressively increasing wage with excellent benefits., • Nationally recognized credential - Completion of Apprenticeship Certificate. Apprentice Training: The Local Union Pipefitters 533 Apprenticeship Program is a five-year training program. Individuals accepted into this program will receive both classroom training through the Local Pipefitters Training center and on-the-job training with an employer. Trainees are paid a percentage of the pipefitter wage rate for their work, with step increases, until graduating from the program. Upon graduation, trainees receive 100% of the wage rate as determined by the bargaining agreement with the local union. • 5 year apprenticeship training program., • Learn through both classroom training from the local union training center and on-the-job training with an employer., • Work full-time and attend classes 2 evenings per week, 4 hours per night., • Receive a strong general education background in the trade, with core courses in basics such as mathematics, mechanical drafting, and related science., • Preparation of construction site for installation of equipment and piping. Installing supports and hangers., • Reading drawings, and specifications to determine layout of pipe and equipment fabrication and installation., • Rigging, setting, supporting and piping of equipment, valves, fittings., • Measuring, cutting, bending, preparing and joining all types of pipe including threading, welding, brazing, soldering, cementing, fusion and mechanical joining., • Pressure test systems to detect leaks., • Detecting faults in piping systems, and correctly diagnosing their causes., • Awareness of legal regulations and safety issues., • Must have successfully completed a community college/vocational certification program OR Associate’s degree related to hands-on HVAC/welding/plumbing trades OR have at least 1 year of full time Mechanical/Plumbing/HVAC hands-on trade work experience., • Must be proficient in basic math skills: additions, subtraction, multiplication, division, fractions and decimals., • This position is represented by Local Union Pipefitters 533., • Must be able to work full-time and attend night classes 2 days per week., • Must be at least 18 years of age., • Must have a High School Diploma or GED equivalent., • Must be able to satisfactorily pass a urinalysis drug screen., • The following documentation must be provided:, • Detailed resume with education, training and job history information including dates of employment for each position and if not self-explanatory, position responsibility summaries. This must be uploaded online with your P1 Employment Application., • Physical ability to perform manual work for at least 8 hours per day in all weather and temperature environments., • Ability to work in cramped positions., • Good hand-eye coordination, • Good sense of balance, maintain equilibrium on uneven surfaces., • Good physical fitness and agility., • Lifting and carrying: Raising objects from a lower to a higher position or moving objects horizontally from position-to-position. This factor is important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles., • Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms. Body agility is emphasized. This factor is important if the amount and kind of climbing required exceeds that required for ordinary locomotion., • Stooping: Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles., • Kneeling: Bending legs at knee to come to a rest on knee or knees. Crouching: Bending the body downward and forward by bending leg and spine., • Crawling: Moving about on hands and knees or hands and feet., • Reaching: Extending hand(s) and arm(s) in any direction., • Standing: Particularly for sustained periods of time., • Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another., • Pushing: Using upper extremities to press against something with steady force in order to thrust forward, downward or outward., • Pulling: Using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion., • Grasping: Applying pressure to an object with the fingers and palm., • Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips., • Talking: Expressing or exchanging ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly, or quickly., • Hearing: Perceiving the nature of sounds at normal speaking levels or without correction. Ability to receive detailed information through oral communication, and make fine discriminations in sound., • Smelling: Perceiving or detecting the odor or scent of something. Ability to detect the odor or scent of something and make fine distinctions in smell., • Extent Flexibility: Bending, stretching, twisting, or reaching with your body, arms, and/or legs., • Finger Dexterity: Making precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects., • Repetitive Motions: Substantial movements (motions) of the wrists, hands, and/or fingers., • Visual Acuity: Good visual acuity is required including but not limited to various distances: near detail work and far; various light conditions: night or in dim light, in daylight or bright light, under glare or poor contrast; to operate motor vehicles or heavy equipment, distinguishing colors, shapes, patterns depth perception and peripheral vision., • WORKING CONDITIONS: Workers are required to wear appropriate personal protective equipment such as steal toed work boots, hardhats, safety glasses, work gloves, safety vests, protective suits, ear plugs/muffs, masks/respirators, fall protection and other devices to protect their eyes, respiratory system, hearing or physical safety. Workers must be especially alert to safely follow procedures and must deal with a variety of hazards. Workers are subject to the following environments: inside areas with uncontrolled temperatures; outside areas with extreme heat, cold and weather conditions; loud noise; various physical hazards; exposure to various harmful materials/chemicals/dusts/poor ventilation; small/narrow work spaces which could cause claustrophobia; exposure to potential infectious diseases/materials. If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting Human Resources: email or call: 913-275-5694. Powered by JazzHR Gv3MxuuoJT

Job DescriptionAre you seeking purpose, challenge, and talented colleagues? With a diverse portfolio of commercial, retail, hospitality, multi-family, and light industrial programs, CESO has the opportunity for you to develop your career. We develop leaders and empower our associates to use their skills and talents to positively impact the world through service – to our coworkers, clients, and communities. We subscribe to the mission of “finding purpose through serving others,” so if this speaks to you, let’s connect! At CESO, the Electrical Project Engineer I demonstrates the ability to perform a wide variety of technical assignments independently with little or no oversight for small, intermediate, or large projects and completes all necessary tasks on assigned projects so projects finish on time, within budget and consistent with industry production and care standards. The Project Engineer I will continuously seek opportunities to learn and develop within the discipline with senior staff support. Primary Responsibilities • Begin to take responsibility for project designs under the Engineer of Record supervision with senior staff oversight., • Communicate design requirements and assist project managers with project coordination and facilitation between architects, contractors, other engineers, equipment manufacturer representatives, and other team members to determine project scope, feasibility, and equipment needs, and provide operating procedures and technical information., • Attend and participate in owner, client, or architect meetings as needed and visit project sites to verify existing conditions and/or observe construction progress., • Participate in client, company, and industry events to build and maintain professional relationships., • Consistently maintains proficient understanding of industry standards and regulations., • Perform calculations, develop design approaches and concepts, design engineering system(s), and fulfill other duties as assigned through collaboration with junior and senior staff, and Engineer of Record approval., • Create intermediate to advanced system layouts, detail drawings, schematics, and schedules using Revit, AutoCAD or other software., • Model lighting system luminaires (based on photometric calculations), controls, and circuiting for normal and emergency lighting., • Model power systems circuiting and feeders for receptacles, equipment connections, and power distribution., • Develop panel loading, service loading, voltage drop, and fault current calculations., • Model components for telecommunication, fire alarm, security, and lighting protection systems., • Help prepare and modify studies, plans, reports, specifications, and project designs., • Reviews work for technical accuracy and completeness prior to final QA/QC review., • Reviews Shop Drawings and Equipment Submittals for conformance to plan documents and project specifications., • Perform other duties as assigned.Position Requirements, • Bachelor’s degree in Electrical or Architectural Engineering from an ABET accredited college or university and 5 or more years of relevant experience is required; Master’s degree in Electrical or Architectural Engineering, or similar discipline, can substitute up to 1 year of work experience., • Advanced knowledge and proficiency in engineering design, AEC industry, codes and standards is required., • Professional Engineer (PE) license is required., • Computer skills necessary to enter daily timesheet data and use Microsoft Outlook for email correspondence., • Advanced knowledge of Microsoft Office Suite, AutoCAD, Revit, Visual Lighting, SKM Power Tools, and BlueBeam Revu., • Travel may be up to 25% as directed by supervisor. Benefits and Perks, • Flexible and Hybrid Work Schedule, • Paid Time Off – Credited to You 100% Upfront, • 401K with a Company Match, • Rewards and Recognition Program, • Training and Development to Foster Professional Growth, • Paid Holidays, • Medical / Dental / Vision Coverage, • Welcome Box, • Casual Dress Code, • Reimbursement for Professional Licenses, • Paid Time Off for Community Team Service Events, • Voluntary or Supplemental Short-Term / Long-Term Disability, • Employee Assistance Program, • Company Paid Bonding and Recovery

Job Description P1 Construction, LLC. is seeking an Electrical Preconstruction Engineer for the Lenexa, KS office. Join our P1 Team! P1 Construction, LLC., has grown into a national construction and solutions provider. P1 is a specialty subcontractor providing HVAC, mechanical, electrical, plumbing, building technologies, controls, millwright, and architectural metal work across the U.S. But there’s so much more to P1’s broad spectrum single-source capabilities, including value-added services like virtual design and construction and multi-trade fabrication. When you work for P1 Construction, you'll be part of a culture that puts safety first, treats associates like family, and provides challenging work in a rewarding, energetic environment. P1 Construction takes pride in maintaining a high standard of excellence along with an ethical and friendly business culture. P1 Construction, LLC. is an equal opportunity employer. All qualified applicants will receive consideration for employment, regardless of status, including status as a protected veteran or as an individual with a disability. We offer a competitive compensation package. Job Summary This position is responsible for analyzing design narratives, conceptual and schematic documents, specifications, RFP’s, and other documentation to develop detailed estimates and cost models for electrical construction projects. This position also is responsible for electrical design on design-build projects in the industrial and commercial markets. This position contributes to the success of the company by effectively and efficiently developing electrical designs and project estimates that reflect P1’s competitiveness, expertise, and ability to provide quality services and construction. Responsibilities and Duties * • Participates in pre-bid meetings and bid strategy meetings when requested., • Reviews course construction plans and/or renderings and anticipates the lighting, power and specialty systems well enough to develop construction cost estimates., • Computes cost factors and prepares estimates used for management purposes such as planning, organizing, and scheduling work; preparing bids; selecting vendors or subcontractors; and determining cost effectiveness., • Reviews data to determine material and labor requirements and prepares itemized lists., • Creates and uses models in evaluating costs associated with alternative or value engineering designs., • Consults with clients, vendors, or other individuals to discuss and formulate estimates and resolve issues., • Promotes the company’s capabilities and expertise when dealing directly with key decision makers in the owner or general contracting companies., • Coordinates with other P1 associates to obtain support and commitment to the cost estimates., • Provides improvement recommendations to cost estimating procedures to reduce future discrepancies between estimated and actual costs., • Identifies cost trends to assist management in cost reduction and process improvement efforts., • Provides electrical design and produces construction drawings on design-build projects, primarily in the commercial and industrial markets.Qualifications and Skills, • Education: High school diploma or GED equivalent required. Meets one of the following education requirements:, • Bachelor’s degree in a construction or architectural/electrical engineering related discipline, OR, • At least five years of electrical construction/service field trade experience/training/education, OR, • Equivalent combination of the above., • Professional Engineer (PE) registration is preferred but not required., • Experience:, • At least five years of experience in electrical systems design in commercial and/or industrial markets., • Experience performing electrical construction estimates is preferred., • Experience in utilizing AutoCAD and Revit to produce construction drawings is preferred., • Experience in using estimating software is preferred., • Must be able to satisfactorily pass a criminal background check and drug screen., • Must be able to satisfactorily pass a motor vehicle record check. Must be able to meet P1 qualifications to operate a vehicle on company business. Must be at least 18 years of age. Must possess a valid driver’s license. Must have access to drive a well maintained vehicle. Must have up to date registration with the local Department of Motor Vehicles. Both the candidate and the vehicle must be currently covered on a personal insurance policy.Benefits for fulltime non-union personnel include, • Workflex policy, • Educational Assistance program after two years, • Immediate PTO, birthday pay, and holiday pay, • Volunteer community service paid time off, • Parental and grandparent paid time off after one year, • Bereavement paid time off, • Company paid life insurance, • Company paid disability insurance, • Company paid Employee Assistance Program with counseling, • Company paid financial education & wellness program with budgeting resources, • 401K retirement plan with fully vested annual company contribution equal to 3% of compensation, and additional discretionary annual company contribution subject to vesting (not based on employee paycheck deferral contributions), • Health with HSA, Dental, and Vision insurance, • Dependent Care FSA, • Voluntary Life insurance, • Voluntary Hospital Indemnity, Critical Illness, and Accident insurance plans, • Voluntary Hinge Health Musculoskeletal Digital Exercise Therapy Program, • Voluntary LegalShield and Identity Theft protection plans, • Education 529 College Savings plan, • Employee Discounts If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting Human Resources: email or call: 913-275-5694. Powered by JazzHR oEnIlizi0W

Job Description Position: Electrical Engineer III Location: Overland Park, KS / San Diego, CA / Westminster, CO / Milwaukee, WI / Irvine, CA / Albuquerque, NM / Avon, CO / Lakewood, CO / St. Louis, MO / Belleville, IL / Schaumburg, IL Years of Experience: 5+ Years About RTM: RTM Engineering Consultants is an MEP, Civil and Structural engineering firm that goes beyond the conventional consulting role. We forge deep partnerships with our clients by aligning with the goals, processes and people at each organization. By integrating our expertise, we offer a comprehensive suite of national resources combined with localized relationships, delivering exceptional value to our clients. At RTM Engineering Consultants, we prioritize the well-being and growth of our team members. Our commitment to professional development is evident through hands-on mentoring, opportunities for advancement, and access to RTM University. With integrated multi-disciplinary studios, you'll collaborate with experts of all levels and various disciplines. We continuously foster a positive team culture through outings that strengthen the bonds of our teams and at RTM, giving and taking are fundamental values. We believe in giving our best, contributing to others, and embracing diversity and equality for progress. Join our dynamic and inclusive team where your well-being, growth, and contributions are valued. Our Team: At RTM, we hold a profound appreciation for our workforce. We firmly believe that YOU, our team members, are our most valuable asset and are instrumental in defining our organization. Our dedication lies in delivering experiences that foster your growth and success, whether you are just embarking on your career path or have attained seasoned expertise. Guided by our CORE values of Collaborative Communication, Overall Unity, Respect and Trust, and Excellence in Engineering, we forge a unified team that consistently pursues professional achievement in all endeavors we undertake. RTM is proud to offer a comprehensive benefits package designed to promote employee health, wellness, and financial security. Our offerings include medical, dental, and vision plans, employee assistance program, disability coverage, life insurance, 401(k) and profit sharing, flexible work schedule, paid time off and training and development courses. Benefits of Joining RTM: • Responsible Time Off (RTO) & Paid Holidays, • Flexible Scheduling, • 401K with Matching, • Health, Dental, Vision, & Life Insurance, • Hands-on Mentoring & Learning, • Professional Advancement Opportunities Applies electrical design knowledge, skill and ability to create construction drawings for the project owner and provides continuous professional support throughout the entire construction process. Serves as the primary liaison responsible for coordination and communication activities between the design team and the client/customer and provides project management oversight and professional support throughout the entire construction process. Key Responsibilities: • Provides complete management of project timelines and related design activity communication between the design team and the client/customer, accurately & timely, • In accordance with company standards, provides assistance in the preparation of accurate and complete proposals and engineering agreements, • Accurately and timely produces electrical design elements consistent with project specifications in accordance with the project hours, scope & parameters, • Produces electrical construction documents appropriate for permitting based on project specifics, • Provides research design options consistent with project requirements, • Produces accurate and complete engineering project specifications within project parameters, • Accurately and consistently execute QA/QC process, • Provide project coordination with in house and outside sources, • Provides timely consultation on projects to manage schedules, deadlines, site surveys, punch lists, building codes and standards consistent with company quality standards, • Actively participates in post design consultation activities and represents the company in client meetings through construction completion, • Assists in the preparation of other documents germane to a project with enthusiasm and professionalism, • Responsible for on-boarding and overseeing junior engineers, • Actively mentors junior engineers and designers, • Provide timely billing of projects to accounting department, • Follows established work rules, policies and procedures, • Actively engages with other members of the company to continuously strive to improve processes, create efficiencies and reduce costs, • 4-year degree in Engineering required, • Minimum of 5 years’ experience, • Expert knowledge of building codes and standards, • Knowledge of engineering drafting standards, • Knowledge of electrical engineering standards and other trades, • Demonstrable understanding of construction process and interpretation of construction drawings., • Knowledge of AutoCad, • Knowledge of Revit Equal Employment Opportunity: It is the policy of RTM Engineering Consultants to practice a program of equal employment opportunity, and advancement opportunities are made available to all employees on the basis of individual qualifications without regard to race, religion, color, national origin, disability, age or gender. At this time, only candidates authorized to work in the United States of America without the need for sponsorship will be considered. RTM does not currently accept unsolicited resumes through or from search firms or recruiters.

Job DescriptionAre you seeking purpose, challenge, and talented colleagues? With a diverse portfolio of commercial, retail, hospitality, multi-family, and light industrial programs, CESO has the opportunity for you to develop your career. We develop leaders and empower our associates to use their skills and talents to positively impact the world through service – to our coworkers, clients, and communities. We subscribe to the mission of “finding purpose through serving others,” so if this speaks to you, let’s connect! At CESO, the Electrical Staff Engineer II is proficient in basic engineering practice which helps the senior design staff execute projects by performing basic duties including technical design and calculations, document production, and all other necessary project duties to complete projects on time, within budget and consistent with industry production and care standards. Primary Responsibilities • Learn how to communicate design requirements effectively with internal and external design team members, contractors, and equipment sales representatives to determine project scope and feasibility., • Begin to develop design approaches and concepts with the input and oversight from senior staff., • Participate in client, company, and industry events to build and maintain professional relationships., • Develop an understanding of industry standards, the technical policies and company-specific procedures for project execution., • Perform calculations, design basic engineering system(s), and fulfill other duties as assigned through collaboration and with assistance from experienced design staff., • Create system layouts, detail drawings, schematics, and schedules using Revit, AutoCAD or other software., • Model lighting system luminaires (based on photometric calculations), controls, and circuiting for normal and emergency lighting., • Model power systems circuiting and feeders for receptacles, equipment connections, and power distribution., • Develop panel loading, service loading, voltage drop, and fault current calculations., • Model components for telecommunication, fire alarm, security, and lighting protection systems., • Help prepare and modify studies, plans, reports, specifications, and project designs., • Assist project managers and design team with project coordination and facilitation between architects, contractors, other engineers, and other team members to determine project scope, feasibility, and equipment needs, and provide operating procedures and technical information., • Perform other duties as assigned.Position Requirements, • Bachelor’s degree in Electrical or Architectural Engineering from an ABET accredited college or university and 3 or more years of relevant experience is required; Master’s degree in Electrical or Architectural Engineering, or similar discipline, can substitute up to 1 year of work experience., • Intermediate knowledge and proficiency in engineering design, AEC industry, codes and standards is required., • Professional Engineer (PE) license is required., • Computer skills necessary to enter daily timesheet data and use Microsoft Outlook for email correspondence., • Intermediate knowledge of Microsoft Office Suite. Prior experience with AutoCAD, Revit, Visual Lighting, SKM Power Tools, and BlueBeam Revu., • Travel may be up to 25% as directed by supervisor. Benefits and Perks, • Flexible and Hybrid Work Schedule, • Paid Time Off – Credited to You 100% Upfront, • 401K with a Company Match, • Rewards and Recognition Program, • Training and Development to Foster Professional Growth, • Paid Holidays, • Medical / Dental / Vision Coverage, • Welcome Box, • Casual Dress Code, • Reimbursement for Professional Licenses, • Paid Time Off for Community Team Service Events, • Voluntary or Supplemental Short-Term / Long-Term Disability, • Employee Assistance Program, • Company Paid Bonding and Recovery

Job DescriptionAt ANS, we’re not just a consulting engineering firm- we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy unlimited paid time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. We are seeking a motivated and driven Entry- level Civil Design Engineer to join our team. ANS is a rapidly growing, emerging civil engineering firm focusing on civil, geotechnical, structural, and electrical engineering for renewable energy and infrastructure projects across the US. The ideal candidates will participate in and contribute to a diverse range of engineering projects and services in our team-oriented environment. Under the direction of experienced engineers, you will gain exposure to the Renewables industry in Solar and Battery Storage projects.Job Responsibilities • Under supervision and working with experienced staff, the successful candidates will complete civil engineering designs and the generation of construction plans and specifications, technical calculations, exhibits and reports., • Utilize Civil 3D including alignments, profiles and grading features to produce engineered construction plans and sheet set ups, • Basic understanding of Site Grading & Storm Drainage, Erosion and Sediment Control and Storm Water Best Management Practices with strong desire to learn and an interest in civil engineering design., • Attention to detail, strong problem-solving and good communication skillsPosition Requirements, • B.S. in Civil Engineering from an accredited institution or equivalent Engineering B.S, • EIT Preferred, • 0-3 years of experienceSoftware Expertise, • 2D CAD Intermediate, • Civil 3D CAD Novice. Able to create basic alignments and existing profiles

Job Description Paradigm Power Delivery, a Babcock Power company, is a company whose mission is to build electrical substations, energy storage facilities, and construct or repair electrical power lines while providing high quality, efficient service to our customers, and a safe, healthy work environment for our employees. We strive to give our customers the kind of service and quality product that we would want if we were that customer. Likewise, we want our employees to have the kind of job that we ourselves would appreciate. In a word, that’s our paradigm. Why Paradigm? This is your opportunity to join a high growth industry company where you will partner with our elite industry leaders to drive results and build out a successful power delivery business. This could be your career-defining move. Paradigm has set up an individual development program that supports the growth of the individual. This may include roles with the estimating team, pre-construction team, engineering team, and/or the construction team. The steps and actions involve with the development program support both Paradigm’s need to develop future leaders internally, as well as provide the individual the opportunity to excel based upon their abilities and desires to take on more responsibilities. As a Field Engineer, you will work closely with and report directly to the Construction Manager and you may be positioned in the office or at project site. If at the project site, you will be expected to be a job-site leader in health and safety, ensuring quality reporting and workmanship, and that all work is completed professionally and ethically. Your main functions will include contract administration, project planning and scheduling, and project reporting, and you will play a key supporting role in Project Management for contractual, legal, and other project issues. If at the office, you will be expected to support estimating, project execution planning, procurement planning, process enhancement, and other pre-construction activities to support the company’s objectives. Main Responsibilities: • Assist in the interpretation of drawings and specifications for field crews and craft supervision, • Perform quantity calculations by taking measurements and determining the percentage of completed/installed materials and work, • Lead the preparation of work plans and work packages, • Assist in field surveying and work layout support, including elevation, control points, and compilation of as-built data, • Assist in compiling, processing, and confirming daily labor timesheets, • Assist in the preparation of Job Hazard Analysis (JHA’s), • Participate in job site safety reviews, toolbox meetings, mass safety meetings, and safety training, • Order and schedule material deliveries, • Supervise field operations, • Majority of projects are located in North Dakota, Minnesota, South Dakota, Arizona, New Mexico, Texas, North Carolina, South Carolina, and Georgia., • Perform material takeoffs from drawings, specifications, and other contract documents, • Perform basic engineering calculations and technical drafting to support field operations, • Assist Project Managers and Engineers to gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use, • Assist in the preparation of purchase orders and subcontracts, performing minor solicitations and purchasing as requested, • Assist in the maintenance of basic project recordkeeping and correspondence functions, including daily reports, photographs, requests for information (RFIs), and memorandums, • Assist with entering data into the job cost system and participate in reviewing cost reports with job site management, • Assist in generating change orders and as-built data to be reviewed by the Project Manager, • Provide field support and supervise subcontractor operations, • Prepare execution plans and work packets for future projects, • Bachelor’s degree in electrical engineering, civil engineering, construction management or closely related field., • Up to 4 years of engineering or construction experience., • Ability to read, analyze, and identify discrepancies in engineering plans, specifications, and contract documents., • Ability to freely access all points of a construction site in wide-ranging climates and environments., • Highly motivated, with a demonstrated passion for learning and taking initiative., • Strong work ethic, willing to do what it takes to get the job done right the first time, • Demonstrated commitment to ethics and integrity., • Passion for safety, with the ability to help us ensure that nobody gets hurt., • Strong communication skills., • Team player with the ability to work independently to meet deadlines, goals, and objectives., • Strong organization, time management, and attention to detail. Our benefits cover you and your family on day one! In addition, we offer vacation pay, holiday pay, 401K match, wellness awards, and so much more! Final offers may vary based on multiple factors, including education, depth and relevance of work experience, relevant licenses and certifications, and may vary from the amounts listed in the job posting. The Office or Field Engineer base salary is between $75,000 – $95,000, depending upon degree and qualifications. Benefits • Health Care Plan (Medical, Dental & Vision), • Wellness Programs and Awards, • Gym Reimbursement and Weight Loss Benefit, • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Training & Development, • Employee Assistance Program, • Flexible Spending Accounts

Job Description Looking for a full in shop Technician to run and maintain the shop. Duties: • Repair of HYTORC tools, • Calibration of HYTORC tools, • good customer skills, • Computer knowledge, • Tool Inspection and Diagnosis: Inspect tools and equipment for damage or malfunction. Use diagnostic tools to identify issues and assess the need for repairs., • Repair and Maintenance: Perform repairs and maintenance on a variety of tools, including power tools, hand tools, and industrial equipment. Replace worn or defective parts such as motors, gears, switches, and batteries., • Testing: Test repaired tools to ensure proper functionality, performance, and safety standards are met., • Customer Service: Communicate with customers regarding the status of repairs and provide advice on the proper care and use of tools., • Inventory Management: Maintain inventory of replacement parts and supplies. Order parts as needed., • Documentation: Maintain accurate repair logs and records of services performed., • Safety Compliance: Follow all safety procedures and ensure tools meet safety and regulatory requirements., • Education: High school diploma or equivalent. Certification in tool repair or a related field is preferred., • Experience: Minimum of 2-3 years of experience in tool repair, mechanical, or electrical maintenance., • Technical Skills: Strong knowledge of mechanical, electrical, and hydraulic systems. Experience with power tools, hand tools, and industrial machinery., • Problem Solving: Excellent troubleshooting skills with the ability to analyze and resolve mechanical issues., • Physical Requirements: Ability to lift and carry heavy tools and equipment. Manual dexterity and good hand-eye coordination., • Attention to Detail: Strong focus on quality and precision in all repair work., • Communication Skills: Ability to communicate effectively with team members, management, and customers. Monday through Friday work weeks. 8am to 5pm. Very few Saturdays. There might be a day a month with some traveling required to pickup or drop off tools to customers. As needed. I have couple different pay options available depending on what you prefer. This is a 1099 position. Salary or hourly or commission.

Job Description P1 Construction, LLC. is seeking a VDC Plumbing Detailer for the Lenexa, Kansas office. Join our P1 Team! P1 Construction, LLC., has grown into a national construction and solutions provider. P1 is a specialty subcontractor providing HVAC, mechanical, electrical, plumbing, building technologies, controls, millwright, and architectural metal work across the U.S. But there’s so much more to P1’s broad spectrum single-source capabilities, including value-added services like virtual design and construction and multi-trade fabrication. When you work for P1 Construction, you'll be part of a culture that puts safety first, treats associates like family, and provides challenging work in a rewarding, energetic environment. P1 Construction takes pride in maintaining a high standard of excellence along with an ethical and friendly business culture. P1 Construction, LLC. is an equal opportunity employer. All qualified applicants will receive consideration for employment, regardless of status, including status as a protected veteran or as an individual with a disability. We offer a competitive compensation package. Job Summary Develops detailed coordination and fabrication drawings for underground, above ground, overhead interstitial space, electrical/equipment room, and systems drawings. Manage department SOP and setup projects. Total station and laser scanning (office and field aspects). Communication with VDC Manager and support piping staff in software/hardware needs. Manages all VDC aspects of large scale piping projects including in-house detailers and sub-contractors. Responsibilities and Duties • Produces all VDC plumbing deliverables drawings consistent with specifications, prefabrication guidelines and department standards., • Performs verification and preparation of submittal drawings to meet department and customer requirements., • Prepares RFI documentation requesting clarification of original architectural design and the organization and follow-up responses., • Labels and dimensions drawings prepared by department staff., • Completes all project as built drawings per field comments., • Plots all department drawings., • Reads architectural and structural floor plans, sections and elevations., • Confers with VDC Manager and project manager staff to resolve problems and explaining drawings to production or construction teams and providing adjustments as necessary., • Organizes and leads coordination meetings with sub-contractors., • Manages incoming and outgoing 3D coordination and submittal content both in-house and from sub-contractors., • Assists PMs at high level with material procurement with reports and BOMs., • Coordinates with in-house off site construction facility for material, manpower, and schedule.Qualifications and Skills, • Education: High school diploma or GED equivalent. Bachelor’s Degree related to Construction or Technology Studies preferred but not required., • Direct Experience and Trade Knowledge: Must meet both of the following -, • Competent in the plumbing trade with at least 7 years of union plumbing field experience., • Must have at least 1 year of plumbing drafting experience using Autodesk Revit ., • General understanding of all facets of construction blueprints (architectural, structural, civil, mechanical, plumbing, piping, and special systems), • Computer Skills: Must be proficient in using email, internet, spreadsheet, and word processing applications: specifically Microsoft Office products. Preferred but not required: Adobe Acrobat or Bluebeam Revu experience, Autodesk Navisworks Manage and it’s total functionality, Evolve Electrical Revit add-on, AutoCAD MEP, Trimble Field Points, and Autodesk Recap Pro., • Must be able to satisfactorily pass a criminal background check and drug screen.Benefits for fulltime non-union personnel include:, • Workflex policy, • Educational Assistance program after two years, • Immediate PTO, birthday pay, and holiday pay, • Volunteer community service paid time off, • Parental and grandparent paid time off after one year, • Bereavement paid time off, • Company paid life insurance, • Company paid disability insurance, • Company paid Employee Assistance Program with counseling, • Company paid financial education & wellness program with budgeting resources, • 401K retirement plan with fully vested annual company contribution equal to 3% of compensation, and additional discretionary annual company contribution subject to vesting (not based on employee paycheck deferral contributions), • Health with HSA, Dental, and Vision insurance, • Dependent Care FSA, • Voluntary Life insurance, • Voluntary Hospital Indemnity, Critical Illness, and Accident insurance plans, • Voluntary Hinge Health Musculoskeletal Digital Exercise Therapy Program, • Voluntary LegalShield and Identity Theft protection plans, • Education 529 College Savings plan, • Employee Discounts If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting Human Resources: email or call: 913-275-5694. Powered by JazzHR af9gpkN6ZH

Job DescriptionDescription: Position: Senior Controls Engineer Location: De Soto, KS Classification: Full-time, Exempt Report To: Engineering Manager Direct Reports: None The Role and Responsibilities As a Controls Engineer, you play a crucial role in ensuring our industrial machinery operates with optimal efficiency, reliability, and precision. You are a cornerstone of our engineering team, equipped with a diverse skill set that covers designing, developing, and testing electrical systems. Your expertise in Programmable Logic Controllers (PLC) programming and control systems integration is essential for implementing control algorithms and troubleshooting complex systems. By proactively managing and resolving issues, you ensure smooth and uninterrupted production processes, upholding our standards of excellence. Your contributions are integral to our team's success and our company's leadership in the industry. Your Key Areas of Impact Design and Development of Electrical Systems: You will design, develop, and test electrical systems for industrial machinery, ensuring seamless integration with control hardware and low voltage systems. This leads to enhanced machinery efficiency and reliability. PLC Programming and Automation: You will independently design and implement PLC Ladder Logic using Siemens software, optimizing hardware and software for precise process control. By developing automation systems and tools, you will enhance efficiency, increase productivity, and reduce costs. Technical Interpretation and Integration: You will read and interpret electrical and mechanical design documents, including P&ID drawings and specifications, ensuring accurate implementation. Your mechanical knowledge will facilitate the integration of electrical components with mechanical systems, minimizing errors. Troubleshooting and Maintenance: Leveraging your excellent problem-solving skills, you will troubleshoot and maintain production equipment, identifying defects to ensure rapid issue resolution and sustained efficiency. Customer Service and Collaboration: With a strong customer service mindset, you will provide support to internal stakeholders and foster a collaborative environment. Your ability to work independently and as part of a team will drive project success. Self-Motivation and Communication: As a self-starter with strong interpersonal and communication skills, you will contribute to team dynamics and be willing to work outside core business hours. Project Coordination and Communication: You will ensure clear communication throughout project execution, coordinating information flow among teams and vendors, facilitating smooth project delivery. Industry Trends and Technology Enhancements: Staying up to date with industry advancements, you will suggest architectural and technological improvements, enhancing system capabilities and maintaining a competitive edge. Data and Software Management: You will manage Structured Query Language (SQL) server databases and Manufacturing Execution System (MES) software, optimizing operations and maintaining data integrity, resulting in reliable data management and streamlined processes. Standards and Documentation: You will define departmental standards, develop operational procedures for automation systems, and create comprehensive engineering documentation, leading to consistent practices and improved knowledge sharing. This Job Description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the employee for this seat. Duties, responsibilities, and activities may change at any time with or without notice. Employee must be able to perform the essential functions of the position satisfactorily. In alignment with the Americans with Disabilities Act (ADA), if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. This commitment to providing accommodations underscores our dedication to creating an inclusive work environment where all employees have the opportunity to succeed and contribute effectively. Employees in need of such accommodations are encouraged to contact our Human Resources department to discuss their specific needs. Requirements: You’ve received your bachelor’s degree from an accredited university electrical engineering, computer science engineering, computer engineering, or related field, and you’ve spent at least five (5) years in a PLC programming position with a focus on Siemens software. You will work with a high-level of integrity, confidentiality, organization, and time management. You are proficient with Microsoft Office applications, including Word, Excel, PowerPoint, and Outlook, as well as EPlan and AutoCAD Electrical. You are also proficient in PLC programming and integration with instrumentation, Variable Frequency Drives (VFDs), Servo Drives, and Kuka robots. The Work Environment, Physical Demands, and Travel Your work is conducted in a dynamic manufacturing setting where exposure to noise and fumes is common, necessitating the use of appropriate personal protective equipment and adherence to safety protocols. You must be able to remain in a stationary position 75% of the time, whether standing or sitting, and be able to move about inside the facility. Your work requires manual dexterity, as you will regularly use hands to operate machinery, tools, or controls, and handle or manipulate objects. The ability to hear and discern various sounds and alarms is crucial for maintaining safety and operational efficiency. You operate a computer 90% of the time. You need to be able to lift to 35 lbs. Available for domestic travel up to 25% during the initial training period of six (6) months. Occasional domestic travel of 1-2 times annually required beyond that.

Job DescriptionJob: Senior Electrical Design Engineer – Life Sciences Location: Lenexa, KS or Broomfield, CO Build Your Future with GBA Design with Purpose. Power What’s Next in Life Sciences. At GBA, we’re not your average architectural and engineering firm — we’re a team of innovators, problem solvers, and collaborators dedicated to creating remarkable solutions for a higher quality of life. We’re seeking a Senior Electrical Design Engineer to join our Life Sciences team in Lenexa, KS or Broomfield, CO. In this role, you’ll lead electrical design efforts for cutting-edge pharmaceutical and biotech facilities — projects that directly impact how life-saving therapies are developed and manufactured. If you thrive on technical excellence, collaboration, and seeing your designs come to life in high-performance environments, this role is for you. What You’ll Do As a Senior Electrical Design Engineer, you’ll: • Develop detailed electrical construction drawings and specifications for cleanroom facilities, manufacturing suites, and laboratory environments., • Design electrical power distribution systems for critical manufacturing equipment and regulated environments., • Engineer lighting and emergency egress systems for pharmaceutical and biotech facilities., • Perform load calculations, power system analyses, and coordinate arc flash/short circuit studies., • Create electrical utility matrices and coordinate designs with process, mechanical, and automation disciplines., • Prepare design narratives and basis-of-design documents for client review., • Ensure designs meet FDA, EU, and industry-specific regulatory requirements., • Conduct facility evaluations, troubleshooting, and system assessments., • Coordinate electrical designs with architectural, structural, and other engineering teams., • Develop equipment specifications, review submittals, and collaborate with vendors and contractors., • Mentor junior engineers and designers., • Stay current with electrical codes, standards, and industry best practices., • Lead or support project management activities including budgeting, scheduling, and client communication., • Support proposal development and participate in client presentations.What You Bring, • Bachelor’s degree in Electrical Engineering from an ABET-accredited program., • 10+ years of electrical engineering experience in pharmaceutical, biotech, or life sciences facilities., • Proficiency with Revit, AutoCAD, and electrical analysis tools (e.g., SKM PowerTools, ETAP)., • Strong working knowledge of NEC, NFPA 70, and NFPA 99 codes., • Experience with UPS and emergency power systems., • Strong technical writing and documentation skills., • Exceptional attention to detail and design accuracy., • Collaborative mindset and ability to work within multidisciplinary teams., • Excellent problem-solving, analytical, and project management abilities., • Ability to manage multiple projects and meet deadlines., • Proficiency in Microsoft Office (Word, Excel, Outlook). Our benefits include: • Medical, dental, and vision insurance, • Life, accident, and disability coverage, • 401(k) with company match, • Employee Assistance Program (EAP) and wellness initiatives, • Paid company holidays, floating holidays, and flexible time off Apply today and power what’s next with GBA. At GBA, we are an Equal Employment Opportunity Employer promoting diversity in our workforce by including all individuals regardless of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender identity, gender expression, disability, veteran status, pregnancy status, or any other status protected by law.

Job Description Guidant is an experienced energy measurement solutions business serving emerging and established energy markets across the globe. Our solutions are comprised of products, technologies, software and services that monitor, manage and automate infrastructure in a variety of critical, high-stakes environments. Our solutions optimize the processing, transportation, distribution and storage of a variety of conventional and alternative energy sources, making them safer, more efficient and more productive. As the undisputed leader in liquid custody transfer with the largest global install base, our legacy is built on 80 plus years of accuracy, reliability, and best-in-class technologies. We seek to expand our footprint, network of partnerships, relationships and offerings to meet the comprehensive and evolving needs of energy markets across the globe. With engineering and manufacturing locations in North America and Europe and a vast network of engineers and field technicians throughout the world, we are better positioned than ever before to meet the full range of your measurement needs. The OT Cybersecurity Engineer is responsible for architecting, protecting, monitoring, and maintaining delivery of the security of the company’s operational technology (OT) terminal management solutions offerings, including industrial control systems (ICS), SCADA networks, and other automation infrastructure. This role ensures that OT systems are secure, resilient, and compliant with internal and industry cybersecurity standards while enabling reliable and safe operations. What You Will Be Doing: Security Implementation & Management • Design, implement, and maintain cybersecurity controls for OT systems, including network segmentation, firewalls, intrusion detection, and endpoint protection., • Manage and maintain secure remote access solutions for vendors and field personnel., • Monitor OT networks for unusual activity, potential intrusions, and unauthorized access., • Develop and execute incident response plans specific to OT systems, • Work closely with IT cybersecurity, automation, and operations teams to align security practices across IT and OT environments., • Ensure compliance with standards such as IEC 62443, NIST 800-82, ISA, and corporate security policies., • Identify, assess, and mitigate risks associated with OT systems and third-party integrations., • Provide cybersecurity input in the design and deployment of new control systems and industrial automation projects., • Promote cybersecurity awareness among engineering and operations staff., • Bachelor's degree in computer engineering, Electrical Engineering, Cybersecurity, or related field (or equivalent experience)., • 5 or more years of experience in cybersecurity or network engineering, with at least 2 years of experience in OT/ICS environments., • Strong knowledge of firewalls, IDS/IPS, SIEM tools, and network monitoring systems., • Understanding industrial control systems, real-time operating systems, and critical infrastructure security., • Proficiency with NIST CSF, ISA/IEC 62443, and MITRE ATT&CK for ICS frameworks., • Hands-on experience with network segmentation, asset discovery, and vulnerability management tools., • GICSP (Global Industrial Cyber Security Professional), • CISSP, CEH, or CompTIA Security+, • Strong problem-solving and analytical thinking., • Excellent communication skills and ability to work cross-functionally with IT, engineering, and operations teams. Internally: Collaborate closely with leaders across IT, engineering, and operations. Externally: Regular contact with vendors and system integrators, cybersecurity solution providers, third-party maintenance and support contractors, external auditors, industry and regulatory bodies, incident response partners and customers or partners. Work Environment: General conditions include working in a temperature-controlled office with moderate noise, frequent computer use, and regular meetings. The role requires the ability to manage multiple priorities in a dynamic, fast-paced setting. Infrequent domestic or international travel may be required to support customers. Availability for on-call support during critical incidents or maintenance windows. Being a global leader in the energy industry requires an inclusive and diverse environment. Guidant Measurements promotes diversity, equity, and inclusion by ensuring equal opportunities to all ages, races, ethnicities, religions, sexual orientations, gender expressions, disabilities, or all other pluralities. We celebrate who you are and what you bring. Every voice matters and we encourage you to add to our culture. Guidant Measurements respects the rights and dignity of those it works with and promotes adherence to internationally recognized human rights principles for those in its value chain.

Job Description DALLAS TRAILER REPAIR CO. TRAILER TECHNICIAN Job Summary The Trailer Technician is responsible for performing routine maintenance, diagnostics, and repairs on all trailers and related equipment. This role requires solid knowledge of mechanical tools, service and diagnostic equipment, and repair procedures. Successful candidates will demonstrate strong attention to detail, excellent communication and customer service skills, and the ability to work independently or as part of a team. Key Responsibilities • Inspect, analyze, and diagnose trailers and related equipment for mechanical issues and faulty parts., • Perform requested repairs according to industry standards and manufacturer specifications., • Conduct routine maintenance on trailers and related equipment., • Complete trailer body work and undercarriage repairs (e.g., air bag replacement, cross-members, dolly legs, tandem systems)., • Develop and document action plans for all repairs; follow checklists and established protocols., • Maintain a clean, organized, and safe workspace, including regular care of tools and equipment., • Follow all health and safety regulations and best practices., • Collaborate with coworkers and support team goals while being able to work independently when needed., • Perform other duties as assigned., • Knowledge & Skill Requirements, • Experience: 1–2 years of mechanical or equivalent experience., • Certifications: ASE certifications highly desired but not required., • Must pass pre-employment knowledge/skill test, background check (10-year), and drug/medical physical exam., • Proven mechanical aptitude and basic math skills., • Ability to read and write in English for documentation and communication., • Must have own tools and safety gear (safety glasses, steel-toed shoes, hearing protection). Physical Demands • Heavy Work: Exert up to 100 lbs occasionally, 50 lbs frequently, and 20 lbs constantly., • Frequent activities: Walking, standing, climbing, stooping, crouching, balancing, kneeling, and crawling., • Manual dexterity: Frequent use of hands and fingers for grasping, typing, and operating tools., • Sensory abilities: Talking, hearing, & vision sufficient for detailed inspection, safe operation of tools, machinery, and vehicles. Work Environment Work is performed primarily in a shop setting — both indoors and outdoors. Conditions may include exposure to: • Non-climate-controlled environments / Hot/cold temperature changes, • Dirt, dust, soot, fumes, and other airborne particles, • Moving mechanical parts and electrical equipment, • Chemicals and limited ventilation, • High places, confined spaces, and loud noise, • Proper PPE and adherence to safety protocols are required at all times. Compensation & Benefits Hourly Rate: $25 – $35 (depending on experience and location) Comprehensive Benefits Package Includes: • Medical, Dental, and Vision Insurance, • 401(k) Plan with Company Matching, • Paid Time Off, • Holiday Pay, • Training & Development Program, • Monthly Productivity/Bonus Incentive Program(s), • Shift Differentials (2nd or 3rd Shift ONLY) This job description is not an exhaustive list of all duties or responsibilities associated with the Trailer Technician position. Dallas Trailer Repair Co. reserves the right to modify duties and responsibilities as necessary to meet business needs.

Job Description Paradigm Enterprises, Inc., a Babcock Power company, is a key player in the power delivery sector, focused on building electrical substations and constructing or repairing electrical power lines. We pride ourselves on delivering high-quality, efficient service while ensuring a safe and healthy work environment for our employees. Why Paradigm? Joining Paradigm means being part of a growing team that values input and creativity. If you are looking for a role where your contributions matter and you can truly impact the company's trajectory, the position of Estimator - Power Delivery may be the perfect fit for you. Position Summary: The Estimator - Power Delivery will be responsible for preparing detailed and accurate cost estimates for various power delivery projects. This role involves analyzing plans and specifications, conducting quantity take-offs, and collaborating with project teams to develop competitive and strategic bids. Essential Responsibilities: • Prepare detailed cost estimates by analyzing project specifications and performing quantity take-offs across trades, including high and low-voltage electrical, control systems, and structural elements., • Develop conceptual estimates using preliminary design documents, interacting closely with engineers and project managers., • Maintain a comprehensive database for labor and material pricing to ensure accurate future cost estimates., • Assist in managing the subcontractor RFP process by preparing bid packages and evaluating bids for scope alignment and competitiveness., • Bachelor's degree in engineering, construction management, or related field preferred., • 5+ years of experience in estimating, specifically within the power delivery or construction industry., • Strong understanding of commercial terms, estimating principles, and construction processes., • Proficiency in using estimating software tools, Microsoft Office Suite, and other relevant applications., • Excellent analytical skills with attention to detail to produce accurate estimates., • Effective communication skills, both written and verbal, to work collaboratively with cross-functional teams and stakeholders. Paradigm offers comprehensive benefits that cover you and your family from day one, including vacation pay, holiday pay, 401K match, and wellness awards! Benefits • Health Care Plan (Medical, Dental & Vision), • Wellness Programs and Awards, • Gym Reimbursement and Weight Loss Benefit, • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Training & Development, • Employee Assistance Program, • Flexible Spending Accounts

Job DescriptionDescription: Community Name: Village at Mission Farms Unit Count: 212 Schedule: Monday - Friday. On-Call Required. Are you interested in a career where customers, colleagues, and community service are the cornerstones of your work? Would you like to work with a company that celebrates victories both big and small and welcomes ideas from all levels of our team? If so, join us here at Avanti Residential! Our moto is Sempre Avanti, meaning “Always Forward”/ “Always Welcome.” We are “people people” through our mission and core values. We enhance our communities with our work, see all members of our team as leaders, and live La Bella Vita (The Beautiful Life). With endless opportunities for personal and professional growth, the sky’s the limit when advancing your career and being the best you can be. There is a place for you at Avanti Residential. Join us today! The Service Manager leads and delegates all maintenance requests, preventative maintenance procedures, and amenity area maintenance for the property. This position leads the maintenance team by being a mentor and a leader. Additionally, the Service Manager is responsible for the curb appeal of the apartment community, maintaining inventory, and coordinating with vendors. This position works directly with the Community Manager on all aspects of the community and oversees the property to create a comfortable environment for residents, visitors, and associates. The Service Manager manages the maintenance budget with the Community Manager to achieve all property goals. This role will respond to after-hours emergencies (on-call) as well. What You’ll Do… • Manage maintenance staff by setting direction, priorities, and schedules daily., • Maintain, build, schedule, and complete a preventative maintenance program that minimizes emergency repairs and services with a minimum weekly overview., • Detect deficiencies within buildings and grounds and take and/or delegate necessary action., • Ensure apartment units are ready for new move-ins by conducting inspection and quality control., • High School Diploma or GED required., • 3+ years of experience with property management maintenance required., • 1+ years of supervisory experience required., • Proficiency in plumbing, electrical, appliance, heating, air-conditioning, and many other areas of repair required., • EPA Certification Type II or universal required., • At or within 1 year of hire have a certificate/license with CAMT required., • At or within 6 months of hire have certificate/licenses with OSHA and CPO required., • Written, verbal, and oral communication skills; including checking email and phone/voicemail daily., • Budget knowledge., • Basic computer skills and knowledge of property management systems such as Yardi, SightPlan, etc., • Pass criminal background screening prior to employment., • Possession of a valid driver's license and up-to-date vehicle insurance OR reliable transportation is required., • If minimum qualifications are met during resume screening the Wonderlic pre-employment assessment is required. The assessment will arrive in the email inbox that you provided. What We Do for You… • Premium pay available for required duties completed outside regular operating hours based on business needs and after-hours coverage., • Based on position, annual or quarterly bonuses are awarded based on performance and KPIs., • Up to 40% apartment discount., • Continuing education and tuition reimbursement., • A generous PTO policy., • Health and wellness benefits include Medical/HSA/FSA/Dental/Vision/STD/LTD and many other benefits to meet your specific needs., • 4% company match for your 401k., • Avanti Shares equivalent program for hourly employees where a portion of the company’s transactional profits are awarded to you. The longer you stay, the higher your return., • Avanti Cares Program that helps employees in financial need., • Tenure-based Anniversary Recess., • Avanti Advisors Program to help new hires with onboarding. This job description is not an all-inclusive list of duties and responsibilities. Avanti Residential is an Equal Opportunity Employer and is committed to diversity in its workplace; applicants from all backgrounds are encouraged to apply. If you are interested in applying for a position with Avanti and need special assistance or accommodation to use our website, please get in touch with .

Job DescriptionAre you seeking purpose, challenge, and talented colleagues? With a diverse portfolio of commercial, retail, hospitality, multi-family, and light industrial programs, CESO has the opportunity for you to develop your career. We develop leaders and empower our associates to use their skills and talents to positively impact the world through service – to our coworkers, clients, and communities. We subscribe to the mission of “finding purpose through serving others,” so if this speaks to you, let’s connect! At CESO, an Electrical Project Engineer II shows technical proficiency performing standard engineering design techniques for small, intermediate, or large projects and completes all necessary tasks on assigned projects so projects finish on time, within budget and consistent with industry production and care standards. The Project Engineer II will continuously seek opportunities to learn and develop within the discipline with the senior staff support.Primary Responsibilities • Assume responsibility for project and program designs, concepts, and standards under Engineer of Record supervision and senior staff oversight., • Communicate design requirements and assist project managers with project coordination and facilitation between architects, contractors, other engineers, equipment manufacturer representatives, and other team members to determine project scope, feasibility, and equipment needs, and provide operating procedures and technical information., • Attend and participate in owner, client, or architect meetings as needed and visit project sites to verify existing conditions and/or observe construction progress., • Participate in client, company, and industry events to build and maintain professional relationships., • Consistently maintains proficient understanding of industry standards and regulations., • Perform calculations, develop design approaches and concepts, design engineering system(s), and fulfill other duties as assigned through collaboration with junior and senior staff, and senior staff and Engineer of Record approval., • Create advanced system layouts, detail drawings, schematics, and schedules using Revit, AutoCAD or other software., • Model lighting system luminaires (based on photometric calculations), controls, and circuiting for normal and emergency lighting., • Model power systems circuiting and feeders for receptacles, equipment connections, and power distribution., • Develop panel loading, service loading, voltage drop, and fault current calculations., • Model components for telecommunication, fire alarm, security, and lighting protection systems., • Help prepare and modify studies, plans, reports, specifications, and project designs., • Oversee drawing preparation and ensure work accuracy and neatness prior to final QA/QC review., • Reviews Shop Drawings and Equipment Submittals for conformance to plan documents and project specifications., • Perform other duties as assigned.Position Requirements, • Bachelor’s degree in Electrical or Architectural Engineering from an ABET accredited college or university and 7 or more years of relevant experience is required; Master’s degree in Electrical or Architectural Engineering, or similar discipline, can substitute up to 1 year of work experience., • Advanced knowledge and proficiency in engineering design, AEC industry, codes and standards is required., • Professional Engineer (PE) license is required., • Computer skills necessary to enter daily timesheet data and use Microsoft Outlook for email correspondence., • Advanced knowledge of Microsoft Office Suite, AutoCAD, Revit, Visual Lighting, SKM Power Tools, and BlueBeam Revu, • Ability to travel as needed.Benefits and Perks, • Flexible and Hybrid Work Schedule, • Paid Time Off – Credited to You 100% Upfront, • 401K with a Company Match, • Rewards and Recognition Program, • Training and Development to Foster Professional Growth, • Paid Holidays, • Medical / Dental / Vision Coverage, • Welcome Box, • Casual Dress Code, • Reimbursement for Professional Licenses, • Paid Time Off for Community Team Service Events, • Voluntary or Supplemental Short-Term / Long-Term Disability, • Employee Assistance Program, • Company Paid Bonding and Recovery

Job Description At Sunlighten, we're not just about infrared saunas, we’re on a mission to improve lives through innovative health and wellness solutions. As a global leader in infrared sauna therapy with a 25-year legacy of innovation, we’ve grown from our Kansas City roots to establish a global footprint. With the wellness market projected to reach $7 trillion by 2026, we’re proud to lead the way in light science and longevity. We are seeking a highly skilled, experienced, and multidisciplinary Electrical Engineer to join our dynamic team at our state-of-the-art headquarters in Leawood, KS. Based in the Kansas City metro area, we offer the best of both worlds: the growth of a global company with the close-knit culture of a local business. Sunlighten’s Electrical Engineer will drive both existing product improvements and new product development. The ideal candidate brings the right mix of initiative, expertise, and strong communication skills to join a company experiencing significant growth. In this role, you will drive engineering projects ranging from new capabilities and products to application solutions through launch and full commercialization. You will work directly with our Product Development team to bring new ideas to life and provide engineering and manufacturing support for both new and existing products. Collaboration is key, so you will partner closely with our Sr. Electrical Engineer and Sr. Mechanical Engineer to ensure seamless design and execution. Experience with connected devices is highly desirable, as our products integrate mechanical, electrical, and technological components that require a strong understanding of system design and integration. This individual will play an instrumental role in building a center of engineering excellence at Sunlighten’s headquarters, ensuring our products continue to uphold their reputation for innovation and reliability. Duties/Responsibilities: • Lead and drive existing product improvements and new product development initiatives., • Collaborate with Executive Leadership and the Product Development team to spearhead new engineering projects., • Oversee the full lifecycle of product development from concept through launch and commercialization., • Provide engineering support for both new and existing products, addressing and resolving issues as they arise. With these projects, you will need to collaborate with teams across the organization, including Customer Care, Sales, Logistics, Manufacturing and Marketing., • Utilize strong analytical and problem-solving skills to perform root cause analysis on complex technical challenges., • Communicate effectively with stakeholders at all levels, ensuring complex data is presented in clear, understandable, and visually appealing formats., • The product categories that you will be designing for and supporting are:, • Infrared Saunas, • Red Light Products, • Cold Plunge Chillers #ZR Requirements • 5+ years of electrical engineering work experience., • 1 year of experience in the manufacturing of health and wellness equipment and products or similar industry., • Bachelor’s degree in electrical engineering or a related field., • 3+ years of experience using circuit simulation and PCB design software (PSpice and Altium preferred)., • 3+ years embedded programming experience (C/C++). ESP32 and PIC familiarity preferred., • PCB thermal analysis, airflow analysis, high ambient temperature circuit design., • Rapid prototyping, 3D printing, soldering., • Familiar with multimeter, oscilloscope, low voltage DC and mains voltage supply use., • Strong problem-solving skills and the ability to diagnose and resolve technical issues., • Familiarity with electrical systems and their integration into mechanical designs., • Knowledge of product development processes, including prototyping and testing., • Excellent communication and interpersonal skills to collaborate with cross-functional teams., • Hybrid Work Schedule: Enjoy the flexibility of working remotely part of the week., • Competitive Paid Time Off Policy + Paid Holidays + Floating Holidays, • Fully Equipped Fitness Center On-Site, • Free Lunch Program featuring a James-Beard Award Winning Chef, • Health (HSA & FSA Options), Dental, and Vision Insurance, • 401(k) with company contributions, • Profit Sharing, • Life and Short-Term Disability Insurance, • Professional Development and Tuition Reimbursement, • Associate Discounts on Saunas, Spa Products and Day Spa Services Sunlighten provides equal employment opportunity. Discrimination of any type will not be tolerated. Sunlighten is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law.

Job Description Engenious has opportunities for an experienced Senior Hardware Test Engineer to join our innovative design team, specializing in medical device and other advanced technology development. This is an exciting opportunity for someone with a strong background in electromechanical systems testing within regulated industries. We’re seeking an individual who enjoys solving tough technical problems and also getting hands-on with the work. In this role, you’ll be responsible for developing and executing rigorous, evidence-based test strategies to ensure the safety, performance and compliance of systems. As a key member of our team, you’ll collaborate closely with engineers and designers while also overseeing and mentoring peers. Are you someone who values precision, thrives in a fast-paced environment and is committed to making products that make a difference? Check out this position at Engenious! KEY RESPONSIBILITIES: • Lead the testing of complex electronic and mechanical systems and subsystems, • Collaborate closely with the design team to plan and direct hardware testing; ad-hoc engineering through formal verification and validation, • Contribute to requirements development and review with a focus on testability, • Write and review test protocols based on written requirements, • Provide mentorship for test planning and execution, sharing knowledge of industry best practices for test techniques and methods, • Review the design of fixtures for test and manufacturing, • Provide sophisticated data analysis to effectively communicate test results to a wide audience of stakeholders, • Conduct test method validations when needed to ensure a high degree of quality, • Provide critical design feedback to the project team based on insights gleaned through testing., • Assist with root cause analysis of anomalies discovered during testing, • Efficiently organize tasks and priorities. Clearly communicate progress and test status. Contribute to planning schedule adjustments as needed, • Learn About the Medical Device Industry working on experimental medical devices and applying your existing expertise to great use This is a full-time, permanent position. This position works from our Kansas City based office during core business hours. BASIC QUALIFICATIONS: • 7+ years of testing experience in a regulated industry, • Proficiency with a range of electrical and mechanical sensors and test instruments, • Proficiency with data acquisition systems and data processing, • Experience mentoring engineers and technicians, • Experience in the Medical Device Industry, • Experience with acoustic testing, • Statistics certification zJ2nDAY0Pj

Job DescriptionAt ANS, we’re not just a consulting engineering firm, we’re a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! WHY YOU’LL LOVE WORKING HERE- A supportive, dynamic, and innovative team culture.- Opportunities to attend industry events and showcase your skills.- A chance to directly shape the voice and vision of one of the industry’s fastest-growing firms. As our Civil Engineer III, you’ll be joining our growing civil engineering team. The ideal candidate will collaborate with our multi-disciplinary team to develop a diverse range of renewable energy projects (PV, BESS, HV, Wind).Job Responsibilities: • The Civil Engineer will work under a Project Lead (PE) on multi-discipline projects. They will interact directly with our internal hydrology, geotechnical, structural, and electrical engineering teams., • The role requires technical skills in Civil Engineering design including grading, drainage, erosion and sedimentation control, stormwater management, and SWPPP calculations and reports., • They will utilize Civil 3D including alignments, profiles, and grading features to produce engineered construction plans with minimal oversight, • Complete stormwater and E&S calculations to ensure quality standards are met for Engineers to stamp construction drawings and reports., • Ability to engage in multiple projects to complete successful requirement deliveries, • Experience in dealing with regulatory agencies and review professionals in order to assist with permitting and coordination with regulatory agencies, • On occasion with may perform site visits to validate site constraints and civil design solutions.Position Requirements:, • Bachelor’s degree in civil engineering is required, • FE or EIT is strongly encouraged, • Professional Engineer is nice to have, • Proficiency in design software such as Civil 3D, HydroCAD strongly preferred, • Proficiency in software such as HEC-RAS, GIS, PV CASE nice to have, • Experience in renewable energy projects such as solar, wind, or battery storage is preferred.

Job DescriptionJob: Electrical Design Engineer (5 Years Experience) Location: Lenexa, KS Build Your Future with GBA At GBA, our Life Sciences team brings vision to life through collaboration, craftsmanship, and commitment. We serve biopharmaceutical and industrial manufacturers, CDMOs, and advanced therapy companies through every stage of facility development—from conceptual planning and detailed design to construction support, commissioning, and qualification. We’re looking for an Electrical Design Engineer to join our growing Life Sciences division. This role is key to supporting the design and development of cutting-edge manufacturing and research facilities. You’ll collaborate with multidisciplinary teams to deliver high-quality, compliant, and innovative electrical systems. What You’ll Do • Develop electrical design calculations, layouts, and construction documents, • Produce technical query documents for design clarification, • Support engineering studies and facility assessments, • Coordinate with architects, structural, mechanical, process, and automation engineers, • Design electrical systems including lighting, power distribution, UPS, and security integration, • Participate in internal design reviews and vendor coordination, • Review shop drawings and submittals for electrical systems and equipment, • Stay current with electrical codes, standards, and pharmaceutical industry best practicesWhat You Bring, • Bachelor’s degree in Electrical Engineering from an ABET-accredited program, • 5+ years of electrical engineering experience, • Proficiency in REVIT; AutoCAD experience is a plus, • Experience with electrical system design for manufacturing environments, • Familiarity with electrical analysis software (SKM PowerTools, ETAP, or similar), • Strong understanding of NEC, NFPA, and local codes, • Excellent communication and collaboration skills, • Ability to travel occasionally (10–20%), • PE license preferred but not required, • Life Sciences industry experience preferred but not requiredPreferred Qualifications, • Experience with cleanroom and critical utility electrical systems, • Knowledge of FDA-regulated facility design and ISPE Baseline Guides, • Experience with hazardous area electrical systems (Class I, Division 1/2), • Familiarity with energy efficiency and sustainability practices, • Experience with cold storage and controlled temperature environmentsWhy You’ll Love Working Here, • Competitive salary commensurate with experience in the Life Sciences industry, • Medical, dental, and vision insurance, • Life, accident, and disability coverage, • 401(k) with company match up to 6%, • Paid holidays, floating holidays, and flexible time off, • Professional development and continuing education support, • PE license support and exam reimbursement, • Conference attendance and professional society memberships, • Career advancement opportunities within a growing division, • Mentorship from senior engineers and leadership Apply today and build your future with GBA. At GBA, we are an Equal Employment Opportunity Employer promoting diversity in our workforce by including all individuals regardless of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender identity, gender expression, disability, veteran status, pregnancy status, or any other status protected by law.

Job Description P1 Service, LLC, is seeking an Electrical Project Engineer to service the Kansas City metro area from our Lenexa, KS office. Join our P1 Team! P1 Service, LLC., part of the BCTS family of facility solutions providers, provides customers with the best in HVAC, mechanical, electrical, and plumbing service. Our turn-key solutions for all types of building solutions in a variety of markets has made P1 Service one of the top contractors in the nation. When you work for P1 Service, you'll be part of a culture that puts safety first, treats associates like family, and provides challenging work in a rewarding, energetic environment. P1 Service takes pride in maintaining a high standard of excellence along with an ethical and friendly business culture. P1 Service, LLC. is an equal opportunity employer. All qualified applicants will receive consideration for employment, regardless of status, including status as a protected veteran or as an individual with a disability. The Opportunity The Electrical Project Engineer position supports and assists the project manager or account manager in assuring timely project completion. As directed, researches, studies, understands and assists in contract documentation, budget, safety, statutory, and legal compliance. Additionally, the individual assists in maintaining constructive relationships and supportive communications with clients, vendors, subcontractors, inspectors, community officials, P1 Service staff, and immediate supervisor. They will maintain professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing personal networks and participating in professional societies. What You’ll Do • Develops schedules, budgets, progress reviews, billings, bids, change orders, submittal lists and reports, • Visits jobsites to monitor progress, coordinate with the project team, audit site safety, and review productivity, • Meets with the project team to review short-interval plans, requests for information, change orders, purchase orders, and labor reports and supports the team and project manager, as appropriate, • Assists in start-up planning, coordination, and execution, • Assists in monitoring and enforcing appropriate cost controls. Learns to recognize productivity issues and addresses them with the project manager or account manager and/or team, • Assists in the preparation and presentation of forecasts for the monthly profit review process to include, if necessary, corrective action to resolve problems and restore quality, safety, productivity, and/or profitability, • Establishes and maintains collaborative working relationships with owner, general contractor, subcontractors, and/or vendors to include providing them timely, accurate and complete information, • Coordinates with appropriate P1 Service departments for timely delivery of material and manpower resources, • Provides timely, accurate, and complete information to the company’s senior leaders, • High school diploma or equivalent is requiredPreferred:, • Bachelor’s degree (BS) in a construction or engineering related discipline, or five years of related trade experience and/or trade training, or equivalent combination of education and trade experience, • Ability to research the marketplace, identify target customers and prepare individualized sales and marketing campaigns, • Ability to develop and foster mutually beneficial professional relationships, both internally and externally, • Excellent verbal and written communication skills, • Excellent organizational skills and attention to detail To Apply: Visit our website at If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting Human Resources: email or call: 913-303-9033. Powered by JazzHR MEaJjh2XR7

Job Description Company Overview: Engineering Design & Testing Corporation (“EDT”) is a professional services organization providing forensic engineering, technical consulting, fire investigation, risk mitigation, and associated services across the United States. Founded in 1978, EDT brings more than 45 years of experience providing objective civil / structural, mechanical, and electrical forensic engineering analysis, accident reconstruction services, and expert witness and litigation support to industrial, manufacturing, insurance, and legal professionals requiring comprehensive, unbiased, technically sound opinions and reporting with a wholistic perspective. As an Employee-Owned company, our team of highly qualified experts are vested in delivering cost-effective, responsive, and reliable professional services and deliverables to our clients. Position Summary: Serves as the Engineer-In-Charge (“EIC”) responsible for coordinating with clients, performing site visits, managing resources, writing reports, and setting deadlines to ensure project deliverables are submitted in a professional and timely manner. Conducts investigations involving MEP systems, mechanical devices, and various types of machinery and / or equipment, including but not limited to, HVAC systems, hydraulic / pneumatic devices, pressure vessels, combustion equipment and / or rotating equipment. Performs root cause analyses, hazard and damage assessments, repair vs. replace evaluations and cost estimates, lab and field testing of materials, and design and manufacture defect evaluations. Must be a licensed professional engineer with a thorough understanding of fundamental engineering principles along with a firm comprehension of the function and operation of a wide range of mechanical components and equipment. Provides expert judgement and forms objective, fact based, technically sound opinions and unbiased conclusions on case assignments from insurance adjusters, independent adjusters, attorneys, and other non-legal, non-insurance clients. Must be willing to travel and physically able to climb, stand, walk and kneel for extended periods of time. Is self-motivated and capable of working independently as well as in a group environment with a dedication to ethics, quality, and customer service. This is a Hybrid role. The successful candidate must reside in the general Kansas City, KS / Kansas City, MO area and have the ability to report to EDT’s Lenexa, KS office. Primary Duties & Responsibilities: • Working independently, while ensuring the timely and cost-effective execution of assigned cases;, • Serving as the primary point of contact with clients including development and coordination of case budgets, work orders, site visits, cost estimates, and associated deliverables. Maintaining contact with clients on active cases to provide status updates, including case spend and budget status, and addressing questions, needs, or concerns at least every other week, or as otherwise agreed upon;, • Assisting with the development and ongoing updates to the scopes of work associated with assigned cases, as necessary;, • Making independent decisions for assigned cases, including the selection of applicable analysis and testing methodologies and identification and selection of resources relevant to execution of the established scope of work;, • Managing resources for assigned cases, including both in-house and third-party sub-contractors where applicable, to meet established deadlines;, • Engaging other disciplines to address areas of assignments outside of your experience or expertise / discipline, where necessary;, • Conducting onsite investigations, testing, and gathering applicable field data on residential, commercial and industrial properties to assess damage and gather evidence of damage and / or loss;, • Preparation of repair and / or replacement cost estimates, as necessary;, • Participating in conference calls and / or in-person meetings with clients regarding investigation status and results;, • Preparation of forensic reports clearly detailing the observations made, documentation and data collected from onsite inspections, laboratory examinations, applicable research conducted, testing and performance analysis results, and the associated conclusions;, • Providing technical support and testifying as an expert witness in depositions and court proceedings, as necessary;, • Collaborating with clients, colleagues, attorneys and other industry professionals, as necessary;, • Maintaining weekly updates to case status reports and working with the Regional Engineering Manager and Chief Engineer to address any issues with clients or your assigned cases;, • Conducting research and keeping current with industry best practices and emerging technologies;, • Developing technical topics for publication, industry presentations, and both internal and external training and continuing education development;, • Supporting EDT’s marketing and business development resources including occasionally participating in client-relations meetings, attending industry conferences, preparing marketing and technical presentations, assisting with the development of marketing materials, preparing industry blogs and white papers, and engaging with other industry professionals;, • Participating in EDT’s mentorship program and supporting the training and development of new engineers in conjunction with the Chief Engineer and assigned Training Coordinator;, • Secure and maintain professional licensure (at Company’s expense) in all states where conducting investigations, including remaining current on any continuing education requirements, as necessary. Key Skills & Qualifications: • Strong interpersonal skills;, • Excellent oral and written communication skills with a proven ability to write comprehensive technical reports;, • Strong organizational and time management skills;, • Advanced analytical and problem-solving capabilities;, • A high degree of integrity, honesty and moral values adhering to the Professional Engineer Code of Ethics;, • Ability to work independently with minimal supervision, as well as within a team environment;, • A collaborative demeanor with the ability to work through conflict, differing perspectives and opinions, and communicate across differing backgrounds and education levels;, • Ability to travel out-of-town, with periodic overnight travel required;, • Have strong PC, Tablet and software skills, including:, • MS Office® - Word, Excel, PowerPoint required;, • Adobe Acrobat DC®, Bluebeam Revu®, or comparable PDF software;, • B.S. or M.S. Degree in Mechanical Engineering required;, • 4+ years’ experience in forensic engineering preferred, relevant mechanical engineering & design experience considered;, • P.E. License with NCEES registration required;, • Valid driver’s license required; Engineering Design & Testing Corporation is an Equal Opportunity Employer

Job Description Position Overview The Project Manager will oversee the planning, coordination, and execution of AC electrical and generator demand and preventive maintenance (PM) service projects. This role requires strong organizational, communication, and problem-solving skills to ensure projects are completed safely, on schedule, and within budget while meeting customer expectations and quality standards. Strong Electrical and Mechanical background preferred. After hours and weekend calls and or scheduling outside of normal business hours is required, there will be a call rotation set up between project managers. Key Responsibilities • Clearly and confidently communicate project expectations, deliverables, and schedules to customers, and subcontractors., • Coordinate site visits with customers and vendors., • Manage administrative and organizational project tasks, including building, maintaining, and updating project spreadsheets and documentation., • Create, maintain, and organize digital and physical project folders for accurate recordkeeping., • Ensure compliance with company safety standards and industry regulations throughout project execution. Preferred Qualifications & Requirements • 2–3 years of project management experience, preferably within the electrical or generator services industry., • Field experience in electrical systems or generator installations and maintenance is strongly preferred., • Strong leadership and organizational skills with a proactive approach to managing tasks and solving problems., • Customer-focused mindset with excellent communication and relationship-building abilities., • Ability to manage multiple projects in a fast-paced environment., • Proficiency in Microsoft Office (Excel, Word, Outlook, Project) required; experience with project management software preferred. Benefits • Employee Stock Ownership Plan (ESOP), • 401(k) Retirement Plan, • Health, Dental, and Vision Insurance, • Flexible Spending Account (FSA), • Paid Time Off (PTO) Company DescriptionOne Power (OP) is a leading provider of critical support services in the telecom, data center, and other mission-critical markets. Founded in 2002 and headquartered in Lenexa, Kansas, we strive to be the preferred supplier of equipment and services to our customers. Our expertise and diligence ensure that we meet our clients’ needs and keep their facilities online. With over 50 team members across six locations, we prioritize selecting the right people and fostering their growth within the organization.One Power (OP) is a leading provider of critical support services in the telecom, data center, and other mission-critical markets. Founded in 2002 and headquartered in Lenexa, Kansas, we strive to be the preferred supplier of equipment and services to our customers. Our expertise and diligence ensure that we meet our clients’ needs and keep their facilities online. With over 50 team members across six locations, we prioritize selecting the right people and fostering their growth within the organization.

Job DescriptionDescription: Sales Manager Southern Home Services is a residential HVAC, Plumbing and Electrical company that acquires, owns, and operates businesses around the United States. We are seeking business leaders to join our growing team and become an integral part of our company's future. Are you ready to Be Part of Something BIGGER! Mission Plumbing Heating & Cooling, a Southern Home Services Company, is looking for a dynamic-Sales Manager to join a thriving business that believes in work-life balance and cares about YOU! About this role: This role is vital to our company's success as we expand our team of sales professionals and drive revenue growth. As a Sales Manager, you will play a key role in delivering exceptional, dynamic, and hands-on training experiences that energize and engage our sales teams. Your leadership will be instrumental in developing their skills and driving our collective success. In this role, you will be responsible for: · Drive revenue growth by exceeding daily, monthly, and yearly sales goals through effective sales strategies and optimizing performance across all revenue channels, including Home Comfort Advisors (HCAs), technicians, plumbers, electricians, and Customer Service Representatives (CSRs). · Oversee multi-trade sales efforts across HVAC, plumbing, and electrical trades, utilizing financing and payment options to boost sales effectiveness and customer satisfaction. · Review the dispatch board and work with dispatch and department managers to ensure the appropriate technician, HCA, and resources are assigned to each call. · Manage comprehensive training programs that include hands-on, face-to-face sessions for both management and non-management staff. Establish and monitor KPIs to track and exceed performance metrics and continuously improve training programs to meet evolving business needs. · Collaborate with sales and service teams to develop sales strategies, analyze local markets, and suggest new products, services, and innovative sales techniques to enhance customer satisfaction, increase market share, and build customer loyalty. · Be available for nights, afterhours, weekends, and holidays as needed to support business operations and meet sales objectives. · Recruit, train, and mentor the sales team, assisting with the integration of the “Southern Model” to align with company practices and standards. Required Qualifications: · 3-5 years of experience leading a sales team, or in successful sales leadership roles. · Proven ability to cultivate high-level relationships with key decision-makers. · Skilled in leading change management initiatives. · Strong strategic thinking and creative problem-solving capabilities. · Self-motivated and proactive with a drive for results. · Excellent communication and collaboration skills, with the ability to build trust and rapport with direct reports and across the organization. · Effective time management skills with a keen attention to detail, capable of handling competing priorities and deliverables. · Valid driver’s license with a minimum of three years of driving experience. · Proficient in Microsoft Suite/Office. Preferred Qualification HVAC, Plumbing & Electrical industry knowledge and experience desirable. · Service Titan experience is highly desired The physical requirements of this job include: • Perform work while sitting and/or standing at an individual work station or office, • Communicate verbally via phone or other communication device., • Ability to stand, walk and sit; talk or hear, both in person and by telephone, • Use hands to type, handle or feel objects or controls; reach with hands and arms., • Occasionally stoop, kneel, bend, crouch and lift up to 10 pounds., • Work is usually performed in an indoor office environment. Southern Home Services will make reasonable accommodations to allow an employee to perform the essential functions of the job. Benefits: We offer a rewarding career path with great benefits, flexible schedules, professional and on-the-job training, and growth plans. Be a part of the team our customers call the finest in the industry. · Reliable, Year-Round Work · Weekly Paychecks · Paid Time Off and Paid Holidays · Comprehensive Medical, Dental and Vision Benefits · Health savings accounting · Flexible spending account · Company Matched 401k and no vesting · Bonus Potential · Growth Opportunities · Employee discounts · Company paid short term life insurance · Life insurance This is an Exempt position. Southern Home Services is an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. The policy applies to all employment practices within our organization. Requirements:

Job Description Who is ScriptPro? Imagine working at a place where innovation meets impact, and every day brings new opportunities to revolutionize the pharmacy industry! At ScriptPro, you’ll be part of a dynamic team that’s at the cutting edge of technology, creating solutions that make a real difference in people’s lives. ScriptPro develops, sells, and supports state of the art robotics and services in thousands of pharmacy settings around the United States and Canada. If you love to travel, this is the career for you! We are looking for Field Service Engineers across the country who are mechanically inclined and have great customer service to troubleshoot and service our automation robots and related equipment. Job Summary: The Field Service Engineer maintains ScriptPro’s computer-based technology and automation equipment at customer sites, nationally and worldwide. This is a road warrior, heavy travel position. You get to keep all airline/rental car travel points. Reporting Relationship: Supervisor, Field Service Shift: Generally, a rotating 9 days on, 5 days off schedule. Overtime is typical and paid. Regular, punctual, and predictable attendance is an essential function of every job at ScriptPro. Scope of the Role: • Troubleshoot, diagnose, and repair equipment onsite at pharmacies and remotely by phone, • Administer training and support to pharmacy staff when needed, • Diagnose customer workflow issues and optimize ScriptPro system performance, • 80% or more travel is an essential function of this job and is required (equal amounts of long-distance driving and air travel), • Physical demands of this role require lifting up to 55lbs unassisted, and lifting up to 120lb, push/pull up to 800lbs assisted, climb various ladder types, lifting and stacking servers, mounting monitors, computers, or status screens (including but not limited to 65 inch LCD TVs), as well as stand 6-8 hours per day, • Bachelors degree in Electronics or Computer Science, or equivalent work experience is preferred, • Experience with computer systems repair and a strong mechanical aptitude, • Must be 21 years old or older, • General knowledge of IT, Windows NT/XP/7/8/10, • Must be able to lift 70+ lbs. daily, including when traveling by auto or air, • Must be available to work as needed and assigned, • Maturity and integrity are a must The starting compensation rate for this role has been established at $24.00 hourly or $50K annually, plus generous overtime and a bonus opportunity. The final agreed-upon compensation is based on a number of factors, including but not limited to individual education, qualifications, skills, prior work experience, competencies, and geographic work location. The above compensation range represents the Company’s good faith and reasonable estimate of the range of possible compensation at the time of posting. At ScriptPro, we believe that our employees are our greatest asset. That’s why we are committed to fostering a workplace that prioritizes and enhances your personal health and well-being. • Health: Medical, Dental, Vision, Short-Term Disability, Company Paid Life Insurance & Long-Term Disability, 24/7 on campus Gym, and Vitality Wellness Program that helps lower your premium costs It is ScriptPro's policy to run a comprehensive background check post job offer and you must be able to obtain Department of Defense security clearance after date of hire. See Standard Form 85 to preview requirements. ScriptPro develops, sells, and supports state-of-the-art products and services for healthcare system customers, including federal agencies such as Department of Defense, VA, Indian Health Services and major hospital systems across the U.S. and Canada. These customers require specific security clearances and health-related tests and vaccines for site access. As a condition of employment, you may be required to obtain federal security clearance (See the Standard Form 85), which can include background checks such as criminal history and drug testing, and/or provide proof of health screenings including tuberculosis, annual flu, and COVID vaccinations (medical or religious exemptions will be considered). Crossing the U.S.-Canada border requires a valid passport, no criminal charges, and compliance with Canadian immigration policies (see Canada Inadmissibility List). If your role requires these clearances or health documentation, completion will be mandatory for employment. This position includes responsibilities for ensuring compliance with cybersecurity and privacy policies to support the safeguarding sensitive data, including personally identifiable information (PII) and Protected Health Information (PHI). Completion of annual cybersecurity and privacy awareness training is required, as the role aligns with the organization’s security posture and risk management practices. All duties are defined in accordance with standardizations to ensure consistency and accountability of the policies. Working Conditions: This position encompasses both office and workshop environments. Requires routine use of standard equipment and extended computer use. Candidates may work near and around various conditions such as dust, odors, oil, fumes, and noise. May be exposed to moving mechanical parts and tools, electrical components, and outdoor conditions. This position is very active and regularly required to stand, walk, sit, squat, stoop, bend, reach, and use hands and fingers. Ability to push, pull, and lift independently, encompassing all lifting positions from floor to overhead is required. Motor coordination, tool use, focused attention during extended periods of travel, and specific vision abilities, including close, distance, and color vision, are required. Ability to learn and solve practical problems and interpret a variety of instructions are required. ScriptPro appreciates the unique qualities of each team member, and as an Equal Opportunity employer does not discriminate on the basis of race, color, religion, national origin, sex, pregnancy, age, disability, genetic information, veteran status, or any other legally protected status. The company utilizes internal resources for sourcing and filling positions and, when external assistance is needed, will engage only with pre-approved, contracted agency partners. The company does not offer visa sponsorships. All applicants must have legal authorization to work in the United States. Please visit to learn more about ScriptPro.

Job DescriptionDescription: Home Comfort Advisor/ Outside Sales Professional Southern Home Services is a residential HVAC, Plumbing and Electrical company that acquires, owns, and operates businesses around the United States. We are seeking business leaders to join our growing team and become an integral part of our company's future. Are you ready to be Part of Something BIGGER! Mission Plumbing, Heating & Cooling, a Southern Home Services Company, is looking for a dynamic-Home Comfort Advisor/ Outside Sales Professional to join a thriving business that believes in work life balance and cares about YOU! About this Role: Are you driven by the thrill of closing deals and turning warm leads into satisfied customers? Do you possess a competitive spirit and a relentless will to win? If you're enthusiastic about making an impact and earning over $100K in your first year, we want you on our team! We are seeking a dynamic Home Comfort Advisor / Outside Sales Professional to join our vibrant business, where we value work-life balance and genuinely care about our employees. No prior experience in HVAC, Plumbing, or Electrical industries? Don’t worry! We offer top-notch training and expert industry knowledge to help you excel. Your role will involve collaborating with service technicians to present and recommend the best equipment and service options for our customers' homes. In this role, you will be responsible for: • Interacting and engaging with new, current, and previous customers with solutions for their home comfort to help us build customers for life., • Efficiently communicating during in-home conversations; helping homeowners find solutions to save money on utilities and future repairs while improving the comfort and air quality in their homes., • Conducting follow-up calls to ensure 100% satisfaction and generate a future referral base., • Additional duties as assigned, • A proven history of achieving and exceeding sales goals, showcasing a strong track record in driving results., • Outstanding ability to build and maintain strong, trusting relationships with customers, enhancing client satisfaction and loyalty., • Proficient with PC and adept at using technology sales tools to streamline processes and drive sales effectiveness., • Willing and able to travel to customer locations for in-person meetings, providing personalized service and fostering direct connections., • Minimum of 3 years of business to consumer sales- prior industry experience not REQUIRED, • Strong drive to sell to customers and help solve their needs The physical requirements of this job include: • Perform work while sitting and/or standing at an individual work station or office, • Communicate verbally via phone or other communication device., • Ability to stand, walk and sit; talk or hear, both in person and by telephone, • Use hands to type, handle or feel objects or controls; reach with hands and arms., • Occasionally stoop, kneel, bend, crouch and lift up to 10 pounds., • Work is usually performed in an indoor office environment. Southern Home Services will make reasonable accommodations to allow an employee to perform the essential functions of the job. Benefits: We offer a rewarding career path with great benefits, flexible schedules, professional and on-the-job training, and growth plans. Be a part of the team our customers call the finest in the industry. • Paid vacation, • Paid training, • Reliable, Year-round work, • Limitless Commission, monthly bonuses, periodic spiff, commissions contests, • Weekly Paychecks, • Employee discounts, • Company provided vehicle, • Paid Time Off and Paid Holidays, • Comprehensive Medical, Dental and Vision Benefits, • Company Matched 401k, • Advertised pay is avg of Home Comfort Advisors commission pay This is a Exempt position. Southern Home Services is an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. The policy applies to all employment practices within our organization. Requirements:

Job Description Job Title: Welder I, II, III, Robot Job Function: Rebuild/Production Reports To: Welding Manager, Store Manager, Supply Chain Manager Classification: Non-Exempt Date Approved/Revised: February 22, 2024 Summary With close or minimum supervision, welds and assembles mechanical and to some degree electrical systems to support production schedules. Essential Duties and Responsibilities Employee must be able to perform these essential functions of the position satisfactorily and, if requested, reasonable accommodations may be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship. • Under close or minimum supervision, welds sub-assembly and/or finished products in accordance with written and verbal instructions. This may include GMAW Process (MIG) Welding, Air Arc Gouging of A36 to 4140 heat treated steel in the flat, horizontal and vertical planes., • With minimum supervision perform on-line testing and/or inspection activities., • In accordance with procedures, cleans and prepares units for next operation., • Complies with all safety and hazardous material procedures, wears protective equipment as required to meet or exceed OSHA and company requirements., • Complies with all requirements of Quality System requirements., • May provide training to others on welding, assembly, inspection and/or test procedures., • Maintains all aspects of workplace cleanliness and organization. Additional Responsibilities: • Required to maintain accurate records., • May be required to drive forklift trucks and operate other metal working machinery, overhead cranes manipulators and/or lifts., • May be required to get additional training or certification on welding., • May provide assistance to other departments, as needed., • May be required to participate in Small Group Improvement Activity Teams, daily Team Meetings and Team Exercise sessions., • Required to identify opportunities for improvements and submit in accordance with Continuous Improvement Program., • Performs all other duties as assigned., • Complies with the requirements of the company’s ISO 9001 Quality Management System (when required). Level Skills Table Below: Skill Level 1 Level 2 Level 3 Product type Forks, Buckets, skid steers Grapples, Spotters, Tack, Sidney Products All Parts /Custom Build from Print Experience 0 to 5years Able to read prints 4 to 7 years Ability to read prints/ weld to print 7+ years Advanced ability to build from prints / custom build parts MIG Welding X X X Welding Certificate X X X Welding Quality Inspection X X X Metal Polishing X X X Production Lead X Robotic Welding Experience X Trainer X Physical Requirements • Ability to sit, stand, climb, bend and kneel on a regular basis., • Regular manual dexterity/coordination: hand/eye movements, motor control., • Regular visual effort: concentrated reading of documentation or close viewing of computer displays., • Ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down; not performing while the whole body is in motion., • Work in a factory environment with exposure to noise, chemicals, heavy equipment and machinery., • Able to push, pull and lift up to 50lbs. on an occasional basis. Potential Hazards • Employee may be exposed to hazardous substances including a variety of petroleum- based products, cleaning solvents, etc. on a regular basis., • Employee may be exposed to sharp (cutting) tools on a regular basis. Required Education/Experience/Skills • High School graduate, or equivalent., • Ability to meet deadlines; to understand and follow written and verbal instructions., • Ability to understand and follow posted work rules and procedures., • Ability to accept constructive criticism; ability to prioritize, organize, solve problems, and complete tasks independently., • Ability to communicate effectively and work cooperatively with supervisors, members of management, vendors, and other employees., • Robotic Welder will require computer skills in programming or running the welding programs. Preferred Education/Experience/Skills • Experience performing welding, mechanical and electrical system assemblies., • Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models., • Knowledge of business and management principles involved in planning, resource allocation, leadership technique, production methods, and coordination of people and resources., • Knowledge of machines and tools, including their designs, uses, repair, and maintenance., • Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Certifications, Licensees or Registrations Required/Preferred • Welding Certification.

Job DescriptionP1 Construction is seeking a Software Engineer Intern for Summer 2026 in our Lenexa, Kansas office. Duration: Summer 2026 Interns are paid P1 employees Join our P1 Team! P1 Construction has grown into a national construction and solutions provider. P1 is a specialty subcontractor providing HVAC, mechanical, electrical, plumbing, building technologies, controls, millwright, and architectural metal work across the U.S. But there’s so much more to P1’s broad spectrum single-source capabilities, including value-added services like virtual design and construction and multi-trade fabrication. When you work for P1 Construction, you'll be part of a culture that puts safety first, treats associates like family, and provides challenging work in a rewarding, energetic environment. P1 Construction takes pride in maintaining a high standard of excellence along with an ethical and friendly business culture. P1 Construction, LLC. is an equal opportunity employer. All qualified applicants will receive consideration for employment, regardless of status, including status as a protected veteran or as an individual with a disability. Job Summary We are seeking a motivated Software Engineer Intern with a passion for technology and a desire to learn and grow with our team. This role provides an opportunity to contribute to impactful projects that enhance our internal processes, with a real chance to leave your mark on the organization. P1 Construction, LLC. is at the forefront of innovation in construction. We are committed to delivering exceptional value through advanced technology solutions. Our dynamic team thrives on creativity and is dedicated to transforming the industry standards. Why Join Us? • Gain hands-on experience in a real-world setting with cutting-edge AI-powered development tools. You will work with professional tools like Cursor and Claude to boost your productivity., • Work in a supportive environment that fosters professional growth and innovation. We encourage a "fail fast, learn faster" approach—we don't penalize smart risks that don't pan out., • Engage in a well-structured internship program that offers opportunities to learn about construction, explore job sites, and enjoy fun activities throughout the summer., • Your ideas matter here: We're a small, agile team where interns have proposed and built features that are now used company-wide.What You'll Do as a Software Engineer Intern:, • Challenge the status quo: Develop applications that improve and streamline internal processes using modern AI-assisted development workflows. We want your fresh perspective on problems we've been solving the same way for years., • Choose your focus based on your experience:, • Web Application Track:, • Build web applications using Cursor as the primary development environment with JavaScript, React, Node.js, and PostgreSQL on Microsoft Azure., • Design and implement custom Power BI dashboards to visualize business data in new ways., • C# Development Track:, • Contribute to C# projects in Visual Studio using Claude AI for code generation and problem-solving to build custom plugins for Revit design software., • Bring AI ideas to the table: If you have experience with AI agents or LLM-powered tools and ideas for how they could enhance our development productivity or modernize our processes, we want to hear them. This is an opportunity to experiment and innovate., • Collaborate with a dynamic team while taking ownership of individual projects—your ideas will be heard and implemented.Qualifications and Skills, • Education:, • High school diploma or GED equivalent required., • Must be currently enrolled in a Bachelor's degree program in Computer Science or closely related technical field., • Must have at least one full college semester remaining after the internship concludes in August 2026 (graduating December 2026 or later)., • Students graduating college in May 2026 or who have already graduated are not eligible., • Portfolio: On resume or cover letter, applicants are strongly encouraged to include links to their portfolio or GitHub profile showcasing projects that highlight experience in JavaScript/React and/or C#. If you don't have a portfolio yet, that's okay - be prepared to discuss technical problems you've solved, side projects you're working on, or ideas you're excited about in your interview. We're especially interested in seeing projects where you:, • Built something unconventional or experimental., • Solved a problem in a creative way., • Implemented AI/LLM features or automation., • Contributed to open source or built side projects that show your curiosity., • Experience preferred:, • Previous internship or substantial project experience demonstrating proficiency in JavaScript/React and/or C#., • Experience with any of the following: Node.js, PostgreSQL, Microsoft Power BI, Git, GitHub, Autodesk Revit, and Autodesk Revit APIs., • Skills:, • Strong analytical and problem-solving abilities., • Ability to navigate both backend and frontend technologies., • Excellent communication and interpersonal skills—you'll need to explain your ideas and convince us why they're worth trying., • Self-motivated with the ability to independently drive projects and bring your own ideas to the table., • Other Requirements, • Must be able to satisfactorily pass a criminal background check and drug screen., • Must be able to satisfactorily pass a motor vehicle record check. Must be able to meet P1 qualifications to operate a vehicle on company business. Must be at least 18 years of age. Must possess a valid driver's license. Must have access to drive a well-maintained vehicle. Must have up to date registration with the local Department of Motor Vehicles. Both the candidate and the vehicle must be currently covered on a personal insurance policy. What we value most:, • Passionate about emerging technologies and excited to push boundaries., • Curiosity and willingness to learn (over knowing everything already)., • Interest in AI tools and automation - we want people who experiment with new technologies., • Creative problem-solving., • Proposing new solutions (over accepting "that's how we've always done it")., • Experimentation mindset — we encourage trying new approaches. If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting Human Resources: email or call: 913-275-5694. Powered by JazzHR JmWOVXRwda

Job DescriptionDescription: Community Name: The Locale; 6201 Johnson Dr. Mission, KS 66202 Schedule: On call needed! Are you interested in a career where customers, colleagues, and community service are the cornerstones of your work? Would you like to work with a company that celebrates victories both big and small and welcomes ideas from all levels of our team? If so, join us here at Avanti Residential! Our moto is Sempre Avanti, meaning “Always Forward”/ “Always Welcome.” We are “people people” through our mission and core values. We enhance our communities with our work, see all members of our team as leaders, and live La Bella Vita (The Beautiful Life). With endless opportunities for personal and professional growth, the sky’s the limit when advancing your career and being the best you can be. There is a place for you at Avanti Residential. Join us today! The Service Technician is responsible for keeping the appearance and operations of the property in excellent condition, both inside and out. Daily responsibilities include making ready units for new move-ins, performing work orders (electrical, plumbing, HVAC, etc.), appliance repairs, unit inspections, updating logs as needed, and exterior maintenance. This role will respond to after-hours emergencies (on-call) as well. What You’ll Do… • Prepare units for move-ins with electrical, plumbing, carpentry, masonry, and painting repairs., • Aware of the condition of the property at all times and take immediate steps to correct unsafe conditions, including reporting any safety concerns to the Service Manager and or Community Manager immediately., • Complete work orders within 24 hours as directed by the Community Manager and/or Service Manager and report any emergency work orders in a timely manner., • Responsible for 24-hour emergency maintenance and on-call responsibilities., • High School Diploma or GED preferred., • 1+ years of relevant experience required., • OSHA, EPA, and CPO license/certifications preferred., • Written, verbal, and oral communication skills., • Knowledge of facilities management and mechanical equipment., • Pass criminal background screening prior to employment., • Possession of a valid driver's license and up-to-date vehicle insurance OR reliable transportation is required., • If minimum qualifications are met during resume screening the Wonderlic pre-employment assessment is required. The assessment will arrive in the email inbox that you provided. What We Do for You… • Premium pay available for required duties completed outside regular operating hours based on business needs and after-hours coverage., • Based on position, annual or quarterly bonuses are awarded based on performance and KPIs., • Up to 40% apartment discount., • Continuing education and tuition reimbursement., • A generous PTO policy., • Health and wellness benefits include Medical/HSA/FSA/Dental/Vision/STD/LTD and many other benefits to meet your specific needs., • 4% company match for your 401k., • Avanti Shares equivalent program for hourly employees where a portion of the company’s transactional profits are awarded to you. The longer you stay, the higher your return., • Avanti Cares Program that helps employees in financial need., • Tenure-based Anniversary Recess., • Avanti Advisors Program to help new hires with onboarding. This job description is not an all-inclusive list of duties and responsibilities. Avanti Residential is an Equal Opportunity Employer and is committed to diversity in its workplace; applicants from all backgrounds are encouraged to apply. If you are interested in applying for a position with Avanti and need special assistance or accommodation to use our website, please get in touch with .

Job Description The Heartland Tommy's franchise organization of the Tommy's Express car wash chain is looking for a Maintenance Technician with solid mechanical aptitude and maintenance experience to assist with the technical aspects of our car wash facilities in the Kansas City metro area. As one of the fastest-growing national car wash franchises, Tommy's Express Car Wash operates over 250 stores nationwide. The Heartland Tommy's franchise group has multiple locations throughout the Midwest. This type of growth offers long-term, career opportunities for enthusiastic and talented professionals. We offer great compensation packages, fantastic benefits, and flexible schedules, along with the opportunity to help others with a service that truly makes them happy! This could be the perfect opportunity for you to grow with us! Tommy's Express offers facilities that use the most modern equipment providing faster, safer, and more sophisticated car washing. The machinery automatically adjusts to every vehicle's size and shape to ensure that every surface is clean. The dual belt conveyor makes it easy to enter and leave the wash and offers the ability to wash aftermarket tires and duallies. Job Summary: The Maintenance Technician has mechanical aptitude and maintenance experience that will help oversee technical aspects of our car wash facilities. The position requires prior mechanical knowledge and experience, along with a desire to learn and work with the most advanced equipment and technology in the industry. The Maintenance Technician is responsible for installing, repairing, and serving equipment at multiple car washes, and specifically three sites in the Overland Park and Olathe, KS areas. The role is responsible for partnering with Site Leaders to ensure the day-to-day maintenance and equipment is operating at a high level. Key Responsibilities: • Make good decisions to prevent and resolve issues quickly and appropriately, • Lead the efforts and perform a variety of repair and maintenance tasks on buildings, equipment, electrical, hydraulic systems, and plumbing, • Assist with the day-to-day maintenance operations and align practices to the company's vision, principles, and policies, • Implement preventative maintenance measures, • Operate and maintain a wide variety of hand tools and equipment, • Maintain basic records related to work performed and inventory of repair equipment and supplies; collect and enter data and photo/video documentation into a computer system, • Ability to prioritize tasks, set and attain project goals, and follow specified procedures, • Ability to collaborate with team members and maintain clear, open communication verbally and in writing, • Work under routine and urgent conditions, both indoors and outdoors, • Know and follow safe work methods and safety protocols, • Confident, friendly, outgoing personality and energetic, • Goal-orientation and a strong work ethic, • Ability to maintain clear and transparent communication, • Ensure a consistently great, positive customer experience for every guest, • High school diploma or equivalent work experience, • 2+ years of maintenance experience in construction, electrical, hydraulics, and/or plumbing, • Desired experience and knowledge: installation and maintenance of industrial electrical systems, wiring practices, electrical codes, hydraulic systems, pneumatic systems, high-pressure and vacuum pumps, plumbing, • Experience in operating a variety of equipment and tools; experience with welding preferred, but not required, • Demonstrate proficiency in the safe use of power tools and heavy equipment, • Welding and/or electrical certification preferred, but not required, • Ability to work independently in a fast-paced environment and trouble-shoot quickly, • Willingness to consent to a background check, • Must be 21 years of age with a valid driver's license, • Availability to work a flexible schedule based on projects with possible late nights, early mornings, and weekends (some of the maintenance work cannot be conducted during carwash business hours) Join our team at Tommy's Express Car Wash-Heartland Tommy's and be part of an exciting environment where innovation meets exceptional service. If you are passionate about maintenance work, customer service excellence, and working with advanced technology in the car wash industry, we welcome your application. This position is contingent upon successfully passing a background check and drug test.

Job Description Description Paramark Corporation is seeking a dedicated professional to join our team in Overland Park, KS as a Maintenance Technician. About Paramark Founded in 1971 and headquartered in Rochester, Minnesota, Paramark Real Estate Services offers premium property management, facility management, and commercial brokerage services for private investors, institutions, corporations, not-for-profits, homeowner associations, and cooperatives. Since its inception, Paramark Corporation has experienced rapid growth, managing properties across Kansas, Florida, Minnesota, Wisconsin, Iowa, Illinois, Colorado, and North Dakota. About You You are passionate about your work and driven to succeed. You are always there to help the team when needed and aren't afraid to ask for assistance when necessary. You embody our corporate values: being customer-focused, maintaining a positive attitude, demonstrating a great work ethic, showing dedication, and being a team player. Responsibilities As a Maintenance Technician, you will oversee daily maintenance operations and ensure the upkeep of the property under the guidance of the Property Manager and Regional Manager. A typical day may consist of such tasks as: • Diagnosing and performing minor and routine maintenance in a timely fashion, • Ensure all service requests are completed daily, • Accurately document work performed through our electronic work order system, • Inspect vacated units and create make-ready checklists, • Complete special projects as assigned and prioritized by the Property Manager, • Inspect the exterior of the property for needed preventative maintenance or repairs, • Complete or oversee the completion of the preventative maintenance or repairs, • Order parts and supplies and maintain inventory, • Obtain bids and negotiate pricing from outside vendors and contractors, • Perform emergency maintenance (after hours) as needed, • Coordinate with the Property Manager daily, • Perform and report on all work according to the safety standards of the company, OSHA, and health codes, • Keep work areas clean and tidy daily, • Experience with HVAC, plumbing, carpentry, minor electrical, etc., • Experience with hand tools including tape measure, square, level, hand saw, chisel, cutters, pliers, wrenches, screwdrivers, hammers, etc., • Experience with power tools, including grinders, drills, various saws, rotary hammers, sanders, routers, planers, nail guns, air compressors, etc., • Experience with mechanical equipment such as motors, pumps, compressors, blowers, etc., • Experience with measuring devices such as voltmeters, multimeters, ohmmeters, PH tests, etc., • Basic computer skills with the ability to use email, • Yardi / Voyager experience preferred, • Be organized and efficient., • Be accountable and responsible. While performing the duties of this job, the employee will be regularly: • Walking, • Standing, • Climbing and balancing, • Reaching, • Kneeling, • Lifting up to 100 pounds, • Bending, • Crouching, • Crawling, • Communicating clearly, • Listening actively Our full-time employees who work 30+ hours per week are eligible for the following benefits: • Medical, • Dental, • Vision, • HSA, • FSA, • Short-Term Disability, • Long-Term Disability, • Voluntary Life, AD&D, • 401k with company match, • Competitive PTO Paramark Corporation is an Equal Opportunity Employer and considers applicants for employment regardless of race, color, religion, sex, sexual orientation, national origin, age, disability, genetics, or any other basis prohibited by federal, provincial, or local law. Candidates will be required to pass a criminal background check. All employee must pass the company background check for employment.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Free uniforms, • Opportunity for advancement TruBlue Home Service Ally is a national company with over 120 locations that provides trusted remodeling services, handyman repairs, home safety upgrades, and maintenance services to help seniors age in place and support busy families. With locations across the U.S., TruBlue is a leader in dependable, relationship-based home maintenance. This is a role for a skilled professional who can manage a team, provide training, and execute a variety of residential repairs and upgrades. What Youll Do • Perform high-quality home remodeling, repairs, and maintenance services, • Lead, coach, and support a team of Tru-Pro technicians, • Uphold TruBlues high standard of professionalism, reliability, and customer care, • Communicate clearly with customers and help manage expectations on-site, • Ensure safety, accuracy, and consistency across every projectCommon projects include:, • Bathroom and kitchen upgrades, • Drywall repair and patching, • Flooring installation and repair, • General carpentry, • Interior and exterior painting, • Basic plumbing and electrical (within scope)Who You Are, • Professional, hands-on home repair or construction experience, • Experience managing or mentoring other technicians is preferred, • Strong communication and problem-solving skills, • Committed to doing the job right and doing right by your team and clients, • Valid drivers license, reliable transportation, and full toolset, • Fluent in English and legally authorized to work in the U.S.What Youll Get, • Year-round, consistent work, • Growth Opportunity to additional leadership roles, • Vehicle expense reimbursement or company vehicle, • Strong office and leadership support, • A team culture built on integrity, trust, and professionalism

Job Description We're looking for Automotive Mechanics with a minimum of 5 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician you'll be expected to perform extensive repairs and heavy engine work, advanced vehicle diagnostics, as well as: • Repairing advanced vehicle electrical issues, • Installing, repairing, and replacing vehicle refrigerant and recovery systems, • Performing vehicle diagnostics and repairs on all makes and models, including electric and hybrid vehicle At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: LOF (Lube, Oil, and Filter), Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Precision Tune Mechanic PT01C Technician Hourly & Flat Rate Full Time Pay: $40,000-70,000 Join the Precision Tune Auto Care Team! Celebrating 50 years as a trusted leader in automotive service and a Franchise 500 top-rated brand. At Precision Tune Auto Care, you’ll be part of a team committed to integrity, safety, and top-quality customer service. We provide total car care—from oil changes and diagnostics to engine repairs and scheduled maintenance—and we’re passionate about keeping drivers safe on the road. If you’re looking to build your career with a proven, customer-focused brand, we’d love to have you on our team. Position Summary As an Automotive Mechanic / Technician, you’ll inspect, diagnose, and repair vehicles while delivering excellent customer service. You’ll also help train and mentor team members, keep your work area safe and organized, and stay up to date on the latest automotive technologies. What We Offer: • Competitive hourly pay, • Paid Time Off (PTO) to relax and recharge, • Closed evenings and Sundays — enjoy a better work-life balanceWhat You’ll Do, • Diagnose and repair systems including brakes, hydraulics, exhaust, electrical, cooling, suspension, and alignment, • Perform routine maintenance services (oil changes, tire services, etc.), • Explain repair needs and technical information to customers and teammates, • Participate in ongoing training to stay current with new vehicle technologies, • Support fellow technicians with complex repairs and troubleshooting, • Maintain a clean, safe, and organized workspace, • Follow all company, safety, and environmental proceduresWhat You Bring, • High School Diploma or GED, • At least 6 months of automotive repair or mechanical experience, • Valid driver’s license and ability to pass a pre-employment drug screen, • High energy, positive attitude, and strong customer focus, • Willingness to work days, nights, weekends, and holidays as neededPhysical Requirements, • Lift and carry up to 50 lbs. without assistance, • Stand, walk, bend, kneel, and reach frequently during the workday, • Safely operate vehicles and automotive tools, • Communicate effectively in person and by phone