Trabajos Engineering en Glendale, Arizona - Page 12Crear alertas

Job Description Job Title Supplier Quality Engineer Location Phoenix, AZ or Goodyear, Az Department Supply Chain / Quality Employment Type Full-Time | Exempt Company Overview GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, data center infrastructure, defense, and heavy-industrial markets. With advanced fabrication operations in Arizona and New York, GTI depends on high-performing supplier partnerships to meet rigorous standards for quality, reliability, compliance, and delivery performance. Position Overview GTI is seeking a Supplier Quality Engineer to support supplier qualification, auditing, performance management, and corrective action initiatives across the supply base. This role works directly with suppliers and internal engineering, quality, and procurement teams to ensure purchased materials, fabricated components, and subassemblies meet GTI’s technical and regulatory standards. The Supplier Quality Engineer plays a hands-on role in driving root cause resolution, reducing supplier variability, and supporting new product introduction readiness. Key Responsibilities • Conduct supplier audits, capability assessments, and process evaluations to ensure conformance with engineering and quality standards, • Support supplier onboarding activities including First Article Inspections (FAI), PPAP submissions, and technical validation reviews, • Review supplier quality documentation including control plans, PFMEAs, process flow diagrams, and inspection reports, • Drive Supplier Corrective Action Requests (SCAR) using structured root cause methodologies (8D, 5 Why, Fishbone), • Monitor supplier KPIs including defect rates, on-time delivery, cost of poor quality (COPQ), and corrective action cycle time, • Collaborate with Engineering to define inspection criteria, critical characteristics, and acceptance standards, • Support Advanced Product Quality Planning (APQP) activities for new product launches and engineering changes, • Investigate nonconforming materials and coordinate containment, corrective action, and disposition decisions, • Maintain supplier performance dashboards and quality reporting tools, • Partner with Procurement to support sourcing decisions based on quality risk and supplier capability, • Conduct dimensional inspections, weld reviews, and documentation audits as required, • Support continuous improvement initiatives to reduce scrap, rework, and supplier-related production disruptions, • Travel to supplier facilities for audits, technical reviews, and quality investigations as needed Required Qualifications • Bachelor’s degree in Engineering, Quality, Manufacturing, or related technical field, • 4+ years of experience in supplier quality, quality engineering, or manufacturing quality roles in an industrial environment, • Working knowledge of ISO 9001, APQP, PPAP, FMEA, and Control Plans, • Experience performing supplier audits and capability assessments, • Strong understanding of metal fabrication, machining, weld processes, or electro-mechanical assemblies, • Experience with root cause analysis tools and statistical process control concepts, • Ability to read and interpret engineering drawings, GD&T, and weld symbols, • Strong communication skills and ability to influence supplier performance improvements, • Proficiency in ERP systems and Excel-based data analysis Preferred Qualifications • CQE, CQA, or Six Sigma certification, • Experience in modular fabrication, energy systems, or defense manufacturing, • Familiarity with AWS D1.1 weld standards and inspection requirements, • Experience working with multi-site manufacturing operations

Job DescriptionRemote SW Engineer ($90k-$140k) - Ruby, AWS, React, Agentic AI Permanently 100% Remote Job Title: Remote SW Engineer 1 or 2 Salary: $90k-$130k Base + Benefits, 401k, PTO Requirements: Ruby on Rails, React, AWS Our Tech Stack: Ruby/Rails, AWS, React, Vue, TypeScript We offer an intuitive AI powered CRM for financial advisors and wealth managers. This is a very exciting time for us, we've been growing like crazy and just closed a $200MM round of funding! Our CRM makes it incredibly easy for everyone from solo financial advisors to enterprise firms to manage their current book of business, contacts, and increase their sales. Our software integrates seamlessly with both leading FinTech brands and general tools like Google and Outlook. It enables them to manage their book of business, streamline their workflow, and grow their practice. We are Series B funded for $30MM, have been in business since 2012, and have 100 employees. We are REMOTE first and our team is distributed throughout the country. Due to growth, we are hiring a Remote SW Engineer 1 or 2 experienced with: • Ruby, Rails, • AWS (EC2, Lambda, IAM, VPC, S3), • React, • JavaScript, Vue, TypeScript, • Ansible, • Terraform, • CloudFormation, • Linux, • Our team uses the following AI tools, so any experience with following is a BIG plus, • Cursor, • Claude You don't have to have experience with Agentic AI to work here, as long as you have the interest! We work in a high trust environment, and many of our engineers have used Rails since version 2.3. We work across the stack. We expect our engineers to think like product people, and drive projects from inception through production. Top Reasons to Work with Us • Remote: Permanently 100% Remote, • Compensation: $90k-$140k Base + Benefits, 401k, PTO, • Ownership: Take ownership of our products next gen architecture, • Culture: Modern, supportive start-up cultureWhat You Will Be Doing, • Partner with our other very senior Rails developers who have been using the framework since 2.3, • Work closely with Claude to ship using agentic workflows and ALLM, • Make architectural decisions that drive the next generation of our tech stack., • Work closely with technical product teams to create custom user experience-led features, • Navigate from front to back end architecture improvements, • Built out 3rd party integrationsWhat's In It for You, • $90k-$140k Base + Benefits, 401k, PTO, • Vacation/PTO, • Medical, • Dental, • Vision, • Bonus, • 401k So, if you are a Remote SWE with experience, please apply today! • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 10/04/2024 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Our client is seeking a skilled and experienced Sr. Mechanical Engineer to join our team. As a Senior Mechanical Engineer, you will be a pivotal leader in the design, engineering, and delivery of highly complex and specialized mechanical systems. You will spearhead projects demanding innovative thinking, execution, and an understanding of advanced mechanical principles within contamination-controlled environments. This role offers the unique opportunity to work on technically challenging projects, mentor developing engineers, and directly influence the success of our leading semiconductor clients and our firm's growth in this dynamic sector. Responsibilities: • Lead mechanical system design for semiconductor tool installations:, • Develop utility matrices based on tool vendor requirements., • Design point-of-use (POU) connections for all mechanical utilities (PCW, exhaust, gases, drains)., • Ensure designs meet stringent vibration, acoustic, and EMI/RFI criteria., • Lead the design, analysis, and specification of complex HVAC systems for semiconductor manufacturing environments., • Engineer critical process cooling and heating systems., • Design and oversee ultra-pure water (UPW) and industrial water systems, including RO/DI water, process drains, and chemical delivery/drain systems., • Develop and detail specialized exhaust systems for hazardous production materials (HPMs)., • Perform detailed thermodynamic, hydraulic, and psychrometric analyses to optimize system performance, energy efficiency, and operational stability., • Champion safety in design, ensuring compliance with all relevant codes, standards (e.g., ASME, ASHRAE, NFPA, SMACNA, SEMI standards), and client-specific EHS requirements for HPMs., • Lead and participate in design reviews, HAZOP studies, and constructability reviews., • Drive interdisciplinary coordination with electrical, structural, process, chemical, controls, and architectural teams to ensure seamless integration of mechanical systems., • Conduct field verifications, site surveys, and as-built documentation to assess existing conditions, identify design constraints, and support construction and commissioning phases., • Provide engineering support during construction, including RFI responses, submittal reviews, site inspections, and system start-up and commissioning oversight., • Develop detailed sequence of operations (SOO) and contribute to control system narratives., • Bachelor’s Degree in Mechanical Engineering from an ABET-accredited institution is required., • Active Professional Engineer (PE) license in the state of practice, or the ability to obtain reciprocity within an acceptable timeframe is required., • Demonstrated experience in mechanical engineering design, with a significant portion focused on semiconductor facilities, cleanrooms, or analogous high-tech industrial projects (e.g., pharmaceutical, biotech)., • Demonstrated experience with design-build and fast-track project delivery for semiconductor tool install projects is highly desirable., • Strong experience with at least one of the following hydraulic modeling software packages: PIPE-FLO, AFT Fathom, AFT Arrow, or similar., • In-depth knowledge of HVAC (including cleanroom specific), plumbing, fire protection (general understanding, coordination with FPE), and process mechanical systems (UPW, PCW, process exhaust, specialty gases)., • Thorough understanding of relevant codes and standards, including ASHRAE (Std 62.1, 90.1, Cleanroom Standards), SMACNA, NFPA (especially for HPMs), International Mechanical Code (IMC), and familiarity with SEMI Standards (e.g., S2, S6)., • Proven experience performing detailed field verifications and site walks, with the ability to troubleshoot complex design and construction issues in real-time., • Excellent communication, collaboration, and problem-solving skills, with the ability to interface effectively with clients, vendors, and multidisciplinary project teams., • Benefits: Includes comprehensive health, dental, and vision insurance, life insurance, 401K retirement savings plan (with company matching), opportunities for professional development and training (including support for relevant licensure & certifications), and generous PTO & paid holidays. This position is an onsite role that will require you to work onsite each day and be located in the N. Phoenix, AZ area. Remote or hybrid work arrangements for this role are not available. Relocation assistance may be provided for well-qualified candidates. Company DescriptionWe're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.We're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.

Job Description Principal RF Design Engineer - SME Communications/Electronic Warfare $15,000 Signing Bonus | Relocation Assistance Provided | Location: Huntsville, Alabama We are seeking a highly experienced Principal RF Design Engineer to serve as a Subject Matter Expert in advanced communications and electronic warfare systems. This role is based in Huntsville, Alabama, and includes relocation assistance along with a $10,000 signing bonus. Position Type: Full-Time | Hybrid Pay Range: $165k - $250k annually with annual bonus potential Why Join Secmation Secmation is a proven, mission-focused engineering company with more than a decade of success delivering real capability to the defense community. We operate with the speed, ownership, and tight-knit culture of a small business-backed by the credibility and track record that comes from 10+ years of successful execution. Here, engineers build systems that matter, move fast, and ship technology that directly impacts national security. Join the future of Electronic Warfare Secmation is hiring a Principal RF Design Engineer that will be responsible for leading the development of complex military communications and electronic warfare. This position requires you to be a Subject Matter Expert in RF and communications design and countermeasure development for mission critical applications. The ideal candidate will be a principal-level, hands-on development engineer with deep expertise in RF design for tactical military communications systems, including SDR, SATCOM or advanced Radar systems. This individual will not only lead technically at the program level but will also be directly involved in the full engineering lifecycle-from initial design through real-world testing, validation, and operational implementation. This position is based in Huntsville, AL, working closely with key defense customers to drive advancements in military communications. In this role, you will lead cutting-edge initiatives that push the boundaries of electronic warfare technology and contribute to mission-critical programs. You will have the opportunity to shape the future of secure, resilient communications for the warfighter, influencing solutions from concept to deployment in support of national security. Key Responsibilities: • Lead the design and development of advanced RF, radar, communications, and EW systems-including receivers, transmitters, front-end architectures, and tactical military communication solutions., • Provide SME-level guidance across Electronic Support, Attack, and Protection (ES/EA/EP), applying deep knowledge of radar, COMINT, SIGINT, and threat modeling to shape system concepts and architectures., • Develop and refine system models, simulations, and signal-processing algorithms in MATLAB/Python, transitioning concepts from analysis to embedded implementation., • Drive systems engineering activities, including requirements development, system architecture, trade studies, and preparation for major design reviews (SRR, PDR, CDR)., • Lead integration and test of RF/EW systems in lab and field environments, developing HWIL approaches, automated test procedures, and resolving complex RF or interoperability issues., • Must have an active DoD Top Secret Clearance, • BS in Electrical Engineering or related discipline, • 15+ years' experience in military RF systems including simulation, system design, software, and implementation of communication systems and EW, • Proficient in the design, implementation, and analysis of military communication systems including adaptive tuning, optimization, and error correction, • Experience in C/C++ for embedded applications, • Experience in Electronic Warfare (EW) system design and applications, • Ability to work in a fast-paced, entrepreneurial environment as part of a small team and execute complex development tasks with limited supervision. Work Environment • Hybrid role with on-site work required in Huntsville, AL., • Core work hours are Monday to Friday, with flexible 9/80 work schedules. Secmation is a proven, high-impact small business with over a decade of mission success-offering technical leaders the rare opportunity to shape both cutting-edge technology and the engineering culture behind it. As part of our leadership team, you'll guide technical strategy, mentor engineers, and help deliver capabilities that redefine what's possible for defense missions. In this role, you'll lead the development of next-generation RF and cyber-integrated systems, bringing together AI-enabled RF analysis, trusted execution, and secure digital-engineering pipelines to build technology where security is designed in from day one. You'll drive architecture and product roadmaps that enable earlier detection of cyber/EW risks, faster adaptation in the field, and a smoother path from concept to deployed capability. Your leadership will directly influence products that change the defense landscape and equip mission operators with smarter, more secure tools. At Secmation, you won't be just another engineer - you'll be part of the core team shaping the future of secure, autonomous, and AI-driven defense systems. Small company. Big mission. Real engineering. Compensation & Benefits • Competitive salary (based on experience and market conditions), • One-time signing bonus, • Relocation assistance, • Company equity, • 9/80 work schedule (every other Friday off), • Paid time off & flexible work schedules, • Comprehensive health, dental, and vision insurance, • Life and disability insurance (short & long-term), • 401(k) retirement benefits plus employer contributions, • And more! About Secmation Secmation is not an IT company - we specialize in AI-driven software solutions, embedded cybersecurity, and secure RF systems for the defense industry. Our mission is to deliver next-generation secure technologies for electronic warfare, autonomous systems, and critical defense applications. Visit to learn more about our work and impact. Equal Opportunity Employer Secmation is proud to be an equal opportunity employer. We are committed to building a diverse and inclusive team. All qualified applicants will be considered for employment without regard to age, race, gender, orientation, identity, religion, or veteran status. U.S. Citizenship is required for this position due to government clearance requirements. The salary range for this position represents a general guideline; however, Secmation considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills, work location, current market conditions, and other bona fide data. This position qualifies for a discretionary performance-based bonus which is based on personal and company factors.

Job Description Come build something with Shepley Bulfinch as a Senior Project Architect! Shepley Bulfinch is seeking a well-rounded Senior Project Architect who is creative and passionate about architecture, curious about solving complex problems, and looking to grow and learn from others that share the same values. The ability to manage a team of 3-10 people, establishing project workplans (staffing, budget, schedule) and fulfilling contractual, financial and cost control responsibilities. We are looking for someone comfortable leading or assisting on the internal production and delivery of architectural drawings, interfacing with clients, and leading meetings during the construction administration phase of a project. Who We Are: Shepley Bulfinch is a national architecture and design firm with offices in Boston, Hartford, Houston, Phoenix and Durham. Founded in 1874, the firm has a notable legacy of challenging convention, pioneering visionary design ideas, and collaborating with clients who seek to drive measurable change. How do you know if this role is right for you? You are collaborative, flexible and well-rounded. You have proven experience in making your voice heard to fulfill the design goals of the firm. You know how to maintain positive working relationships with clients and contractors. You thrive working independently and collaboratively. You are passionate about design and comfortable explaining your design choices. Finally, you have a strong foundation of technical knowledge and familiarity with both interior and exterior detailing. Qualifications: * A minimum of 10 years of experience working on all phases of architectural projects * Prior experience with higher education and/or urban development * B.Arch., M.Arch. or equivalent degree * Registered architect preferred (we will accept candidates actively pursuing licensure) * Significant experience managing and using Revit for architectural documentation, as well as experience reviewing submittals, responding to RFIs and revising documents in Revit. * Up to 20% travel expected regionally and nationally Shepley Bulfinch offers competitive benefits and compensation, including health and dental insurance, a 401(k) and profit-sharing plan, and flexible work schedules, as well as a range of professional growth and development opportunities. Shepley Bulfinch is an Equal Opportunity Employer Powered by JazzHR TLwUzg9ask

Job Description Advatech Pacific is seeking a Aerospace or Mechanical Engineer to support upcoming engineering activities at our Phoenix location. This position’s primary focus will be on the Design and Analysis of Aircraft Structures, Turbines and other Mechanical Components. A good knowledge of Engineering and Design principles for aircraft applications is required. This position will participate in regular meetings to discuss and coordinate drafting and design details with clients, designers, engineers and management. • 3-5 years Mechanical Engineering experience., • 1-3 years Ansys experience., • A good understanding of mechanical component design, modeling and drafting., • Experience utilizing Geometric Dimensioning and tolerancing (GD&T) is a plus., • Demonstrated design, modeling and drafting experience to include detailing of mechanical systems and components., • The ideal candidate should have experience designing mechanical components, aircraft structures, hydraulic/pneumatic systems, gas turbines or aircraft components., • Must be a self-starter with excellent verbal and written communication skills., • Must be able to utilize the MS office suite of products. Education Requires a B.S. in Aerospace Engineering, Mechanical Engineering or equivalent experience in a related field. Due to the responsibilities of these positions, customer requirements, and Export Control Information (ECI) all qualified applicants must be U.S. Citizens. Advatech Pacific is an Equal Opportunity and Affirmative Action Employer. The recruitment, selection, employment, and training of applicants and employees is based on bona fide occupational requirements and is done without discrimination because of race, color, religion, national origin, sex, age, disability or veteran status.

Job Description Advatech Pacific performs design and analysis activities. These activities includes metallic and composite components using a range of tools, including finite element analysis (FEA) and hand calculation methods. Advatech has an available position for a Structural Engineer that will focus on the analysis of various aerospace structures and components. Required Qualifications: • Experience with Nastran, ANSYS or other applicable analysis software programs. 3-15 years’ experience performing hand calculations and FEM analysis for loads, stability, stress, and fatigue analysis., • Experience working as a lead with other engineers., • Demonstrated ability to work independently., • Analyzing components and structures., • Recommending design changes when a component doesn't meet criteria., • Generating project schedules and cost estimates., • Experience as the primary interface with customers, contractors, and vendors., • Demonstrated experience mentoring less experienced engineers., • Experience reviewing other engineers’ work to maintain a high level of quality., • Creating presentations and reports to document design choices and analysis results., • Knowledge of Aircraft Gas Turbine Engines, Rotors, Shafts and Blades is highly desirable or experience with aircraft structures and composites in the following area’s; Design, fabrication, and analysis of composites, formed aluminum, cast, and other metallic components (Spars, Assemblies, Ailerons, Wing Box, Winglets, Pylons, Wing Edges, etc.). Requires a B.S. in Aerospace Engineering, Mechanical Engineering or equivalent experience in a related field. Due to the responsibilities of these positions, customer requirements, and Export Control Information (ECI) all qualified applicants must be U.S. Citizens. Advatech Pacific is an Equal Opportunity and Affirmative Action Employer. The recruitment, selection, employment, and training of applicants and employees is based on bona fide occupational requirements and is done without discrimination because of race, color, religion, national origin, sex, age, disability or veteran status.

Job Description We are seeking a talented and motivated Electrical Engineer to join our team! The ideal candidate will have a passion for design, a keen eye for detail, and the ability to work collaboratively with our architects, engineers, and clients. This role offers an exciting opportunity to work on a diverse range of projects, including healthcare, education, public safety, commercial, and industrial. At EAPC, our team of architects, engineers, interior designers, construction managers, and other professionals work together to create stunning structures and designs for optimum performance. Responsibilities include: • Provide electrical design, detailing, and calculations as required for all phases of the design of new buildings and structures, as well as additions to and renovations of existing buildings and structures, • Coordinate electrical designs with other disciplines such as architectural, mechanical, structural, etc., • Edit and write electrical specifications, • Perform electrical investigations and feasibility studies, including the writing of reports and providing cost estimates when required, • Provide mentorship/training to EIT-level staff, • Provide direction to BIM Modelers as required to complete electrical drawings, • Perform construction administration activities such as the review of material shop drawings, responding to contractor RFIs and construction questions, construction site visits, etc., • Perform site visits as required to field verify existing conditions, dimensions, elevations, etc., • Assist project managers in the development of internal design budgets and schedules as required, • Assist the department manager in determining anticipated project scope, deliverables, fees, etc., as required to complete proposals to provide electrical engineering services to external clients, • Assist with and negotiate contracts with customers/clients, • Bachelor's degree in Electrical Engineering, • 10+ years of experience in a firm or consulting environment preferred, • Registration as a Professional Engineer, • Project management and business development understanding, • Experience in 3D modeling, visualization, and modeling software; REVIT, SKM, and AutoCAD strongly preferred, • Working knowledge of engineering systems, • Effective verbal and written communication skills and strong organizational skills, • Problem-solving skills, attention to detail, and motivation to learn, • Collaborative and professional work ethic, • Ability to prioritize and concurrently service multiple projects, • Willingness to travel as required to meet project and corporate demands, • Ability to understand and communicate with professionals of other disciplines, • Valid driver's license Compensation is based on the applicant's skills, education, and other qualifications. Benefits include paid time off, holidays, 401k with matching contributions, health insurance with dental and vision coverage, company paid life insurance and disability coverage, discretionary annual profit-sharing bonuses and a career that offers challenging and interesting projects with a quality lifestyle in an engaged and inviting community. Applications will be reviewed immediately. EAPC is an equal opportunity employer disability/veteran. If you need any assistance or accommodation completing this application, please contact human resources at 701-461-7481 or email . Following a conditional offer of employment, a motor vehicle background check and background check will be conducted. Job Posted by ApplicantPro

Job Description Transportation/Roadway Design Engineer The ideal candidate will be able to demonstrate hands-on technical design capabilities in rural and urban roadways. Candidates must be self-motivated and able to work on and provide technical oversight on multiple projects and the ability to deliver high quality reports, plans, specifications, and estimates. Essential Duties and Responsibilities: • Process design calculations., • BS in Civil Engineering and AZ registered professional engineer required., • 5+ years of roadway experience, • Civil 3D drafting and design experience required., • Proficiency with MicroStation and/or Inroads preferred, • Proficiency with Microsoft Office software required, • Good problem solving and technical writing skills, • Ability to communicate clearly and succinctly, both verbally and in writing., • Competitive pay, • Generous PTO plan, • Health, Dental and Vision, • 401(k) with #emp#loyer# matching, • Company sponsored LTD/STD/Life Insurance, • In-house training events, • Employee Appreciation events

Job Description Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 3,500+ employees across 30 companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. About Us: Markade Plumbing is a reputable commercial plumbing company serving the greater Phoenix and surrounding areas for 19 years. We specialize in new construction plumbing and pride ourselves on delivering high-quality services and maintaining strong relationships with our clients. Markade is a Kelso Industries company, making it part of one of the nation's leading MEP+ solution providers. About This Role: Markade Plumbing seeks a committed and detail-oriented Project Engineer to support the successful implementation of plumbing systems across various commercial construction projects. This position demands knowledge of the construction process, the ability to read plans, and proficiency in utilizing computer software, particularly project management platforms like Bluebeam and Procore, along with other construction-related applications. Strong communication skills and a passion for collaborating with teams that prioritize quality, safety, and efficiency are essential. What You'll Do: Project Oversight • Assist in the adherence to project schedules, milestones, and deadlines, • Verify installation aligns with plans/specs/ and the contract scope of work (this includes jobsite visits at the closure of each critical phase of work)., • Ensure that all project manuals, specification books, submittals, Geotech reports, and other supporting documents are collected, comprehended, and adhered to, • Review contractual documents, safety plans, and project specifications, • Conduct plan reviews, revisions, updates, as built drawings, and plan markups., • Interface with general contractors, subcontractors, vendors, and internal Markade teams as needed, • Ensure up-to-date drawings and spec books are being utilized, • Communicate with project manager on change orders and pricing, • Work closely with the purchasing team and general contractors to facilitate a prompt and precise submittal process., • Collaborate with architects and engineers to develop plumbing designs that meet regulatory standards and client specifications, • Coordinate with Markade Supervisor for job walk for scope and spec review, • Participate in scope review and sub coordination meetings, • Track and manage RFI's, • Aid in preparing builder and company jobsite specific safety plans, • Reinforce company core values, vision, and safety culture, • Comply with and contribute to expectations for quality and team standards, • Contribute to training plans and personal development for project management team Qualifications • Bachelor's degree in construction management (Preferred), • 5+ years working in a construction field (Plumbing Preferred), • Thorough understanding of the construction process and construction drawings, • Strong knowledge of plumbing systems, codes, and regulations (Preferred), • Strong organizational skills and ability to juggle multiple priorities, • Proficient with Microsoft Office; experience in BlueBeam, BuilderTrend and BuildOps (a bonus), and other project management software, • Excellent analytical, communication, and people skills, • Proficient with typing on a keyboard (Preferred), • Self-starter with initiative and independence, • Champion of company culture and crew development, • Competitive salary with performance bonuses, • Medical, dental, and vision insurance, • Paid vacation, holidays, and sick leave, • Company-paid life insurance Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job Description Harder Mechanical is one of the nation’s largest mechanical contractors with an outstanding reputation for working safely, meeting tough schedules, and delivering quality projects. Based in Portland Oregon, we work primarily in the 11-western states with regional offices in Reno, NV; Phoenix, AZ; Los Angeles, CA; Richmond, CA; Salt Lake City, UT. As a Project Engineer, you will be working in one of these market sectors: Commercial Buildings (healthcare, higher education, mission critical, and retail), Advanced Technology (semiconductor manufacturing, renewable energy), or Industrial (pulp and paper manufacturing). Successful projects do not complete themselves. Our team of curious and passionate people build on Harder's reputation every day through their actions. We offer professional development opportunities, industry-leading benefits, and the chance to work on projects that will change the built environment forever. Find out more at . We have immediate openings for talented Project Engineers with experience managing construction projects ranging from $250,000 - $15 million or more. What you’ll be doing: You will be responsible for planning, scheduling, and executing a specific scope of the project you are assigned to at Harder. You will coordinate with field labor to ensure the work is completed safely, on schedule, and up to Harder Mechanical's quality standards. This is an entry level role that serves as the entry point for a project management career at Harder. Project Engineers at Harder perform the following daily tasks: • Review construction drawings and compile project scope and quantities, • Resolve engineering issues and constraints through communication with design engineers, owner representatives, and fellow team members, • Monitor field construction and ensure compliance with construction plans and specifications, • Engage in work sequence planning, • Prepare and monitor work packages, including labor and cost estimates, • Track construction progress and update status weekly, • Organize project records in an effective document control system, • Mentor new engineers in their roles, taking responsibility for their training and development, • Assist the project manager in additional duties as required, • Proficient in Microsoft Office & Bluebeam – intermediate skills in Excel, • Knowledge of mechanical systems, and experience reading mechanical and plumbing drawings, • Ability to communicate with a broad spectrum of people including suppliers, field crews, designers, and owners, • Self-starter, motivated and takes initiative, • Organized and productive, • Strong time management skills and ability to prioritize tasks on an ongoing basis, • Relentless commitment to teamwork and client satisfaction, • Interest in LEAN construction principles, • Ability to travel to other regions to gain exposure to additional markets and industries, • Must have valid driver license, • 3-10 years of construction management experience, • Competitive salary, • Comprehensive medical, dental, and vision benefits – 100% of employee premiums are paid by the company, • Generous retirement package includes: 10% retirement contribution made by the company and a company match up to 2% of your annual salary, • Profit sharing, • Discretionary annual bonus, • Paid vacation and holidays, • Harder University training and development, as well as other paid professional development opportunities This position is salaried. No recruiters. No phone calls, please. About Harder Harder Mechanical Contractors is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, genetic information, veteran status, or any other characteristic protected by federal, state or local nondiscrimination laws. Our hiring policy reflects and affirms Harder’s commitment to the principles of fair employment. Harder does not discriminate regarding the terms and conditions of employment based on any characteristic protected by federal, state or local nondiscrimination laws. It is Harder’s policy to maintain a drug and alcohol-free work environment. Employment offers are conditional upon successfully passing a drug and alcohol test, background checks, reference checks, and as required by law, regardless of citizenship or national origin, documented proof of authorization to work in the United States. Powered by JazzHR EUhvtXCc7t

Job DescriptionDescription: We are on the lookout for a dynamic and experienced Applications Engineer and Information Technology expert to lead our tech initiatives and drive innovation within our organization. In this pivotal role, you will oversee the IT infrastructure, ensuring that our systems are robust, secure, and aligned with our business goals. You’ll be at the forefront of implementing cutting-edge technologies while fostering a collaborative environment that empowers your team to excel. If you’re passionate about technology and leadership, we want to hear from you! Essential Functions · Lead the strategic planning and execution of IT initiatives to support business objectives and enhance operational efficiency. · Manage the IT infrastructure, including cloud computing, network security, system administration, and data management. · Have a clear understanding of workflow systems, CRM systems, marketing/promotional systems and working with ERP systems. · Lead a team of IT analysts, providing guidance and support to ensure successful project outcomes. · Analyze complex IT systems and processes to identify opportunities for improvement and innovation. · Oversee the entire IT department, including budget, security, infrastructure, applications, contracts, contractors, and procurement of technology related items · Liaise between all parties to best understand and meet department and business requirements · Manage and oversee all stages of the development lifecycle for new projects · Help prioritize short and long-term objectives to support growth and continuous improvement · Maintain existing programs, ensuring that necessary updates are made timely · Oversee the purchase and maintenance of hardware · Stay up to date on security risks and ensure corporate security · Report progress and challenges to senior management · Work to meet the overall corporate goals of ANA, ANAD, AMXS, and aC · Optimize profitability and end user satisfaction through technology · Create processes and standards for selection, implementation, and support of systems · Ensure smooth delivery and operation of IT services by monitoring systems performance · Develop, maintain, and test the Disaster Recovery Plan for the organization · Coordinate with the aC IT group, to ensure that we are meeting or exceeding the requirements of security, company policies, and procedures · Present and implement technological alternatives to streamline functions and improve productivity · Maintain a high level of current tradeshows, technical seminars, and training sessions Supervisory Responsibility This position will be responsible for managing third party IT contractors as well as IT staff at all US and Mexico locations. Work Environment This is a full-time position. This role uses standard equipment such as computers, filing cabinets, photocopiers, fax machines, and phones. This role can be hybrid or flexible but operates mainly in a professional environment with access to a break room for breaks and lunch. General Requirements · Excellent understanding of computer systems, security, network and systems administration, databases and data storage systems, and telecommunications · Strong interpersonal skills and ability to communicate effectively with teams across the entire organization · Excellent leadership and decision-making skills · Strong knowledge of project management principles · Certified Microsoft Office Specialist or having all Microsoft badges is a plus Physical Demands · While performing this position, the employee must be able to and will regularly operate a computer, keyboard, and phone · Must be able to sit at a computer terminal for an extended period Position Type/Expected Hours of Work · This is a full-time position. Days and hours of work are Monday through Friday, hours determined by business needs Travel · Occasional overnight travel is required · Site visits to all US locations must be conducted at least quarterly Required Education and Experience · Bachelor’s degree in computer science or related field · 10 years + experience in the technology field · 3 years + experience in a leadership or management role in an IT setting · Significant experience in all phases of the development lifecycle · Solid working knowledge of current security protocols and threats · Excellent project management, communication, and interpersonal skill s · Ability to foresee possible issues and troubleshoot them proactively Specific Requirements · Willingness to research alternative solutions to increase efficiency, accuracy, and budgetary needs for the business · Knowledge or interests in how manufacturing lines work and IT are incorporated into modern day manufacturing · Extremely responsive, flexible, and a self-motivator · Strong organizational and problem-solving skills · Excellent communication abilities Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Again, this is not an all-encompassing list of job duties and responsibilities. Requirements:

Job Description Summary The Sr. Manufacturing Engineer leads the Manufacturing Engineering teams for Connector and Cable Assembly at the Mesa, Arizona facility. This position will also work with Engineering counterparts in the Wallingford, CT, and West Palm Beach, FL facilities. Qualified candidates for this position will lead to the advancement of our manufacturing technology and improvement of our operation. The Sr. Manufacturing Engineer function maintains the efficiency and effectiveness of all production-related manufacturing equipment and processes to ensure we manufacture high quality products in a repeatable and cost-effective manner. • Work close with leadership on ongoing coaching to the Manufacturing Engineering team dedicated to supporting production, • Assist with planning and coordinating required resources for the Manufacturing Engineering teams, • Analyze and plan work force utilization, space requirements, workflow, and design layout of equipment / workspace for maximum efficiency, • Identify new manufacturing equipment technology. Propose and justify through capital expenditure requests, • Lead and participate in problem-solving teams. Determine and implement solutions, • Serve as an escalation point to resolve technical and quality problems within manufacturing, • Provide key inputs and drive Design for Manufacturability during design reviews/changes, • Assist with facilitation and transition of new products from engineering to production, • Create, develop and update Manufacturing Instructions Lead operation and/or facility transfers and set ups, • Analyze manufacturing variance data and identify/implement improvement actions, • BS in Engineering, • Minimum 3 years’ leadership experience in a manufacturing environment, • Strong written and verbal communication skills, • Excellent organizational and problem-solving skills, • Ability to lead team members and products, • Excellent computer skills. Proficient in Microsoft Office applications, • Experience with Lean manufacturing

Job Description Job Title Senior Electrical Engineer Location Buffalo, NY or Goodyear, AZ (On-Site or Hybrid depending on program needs) Department Engineering Employment Type Full-Time | Exempt Company Overview GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, data center infrastructure, defense, and industrial markets. GTI delivers fully integrated, engineered-to-order solutions including Battery Energy Storage Systems (BESS), generator-backed power systems, and modular data centers manufactured in-house. Position Overview GTI is seeking a Senior Electrical Engineer to lead electrical system design and development across advanced modular programs, including BESS, GenSet-based power systems, and modular data center infrastructure. This role owns electrical architecture, schematic development, and technical execution for complex power and control systems operating across varying voltage levels and power capacities. The Senior Electrical Engineer serves as a technical authority, working closely with mechanical engineering, manufacturing, supply chain, and project teams to ensure designs are safe, scalable, manufacturable, and compliant with applicable standards. This role requires strong experience in power distribution, control systems, and electrical documentation within industrial or energy-focused environments. Key Responsibilities Electrical System Design & Architecture • Lead electrical system design for Battery Energy Storage Systems (BESS), generator systems, and modular data center power infrastructure, • Develop electrical architectures supporting varying levels of power generation, storage, and distribution, • Design AC and DC power systems, including low-voltage and medium-voltage applications as required by project scope, • Create and maintain detailed electrical schematics, wiring diagrams, and single-line diagrams using SolidWorks Electrical or equivalent, • Develop panel layouts, cable schedules, and interconnection diagrams, • Ensure electrical documentation is complete, accurate, and production-ready, • Design electrical systems integrating battery systems, inverters, transformers, generators, switchgear, and protection devices, • Support parallel operation, load sharing, and backup power configurations, • Design control and monitoring interfaces between power systems and control platforms, • Support electrical design for modular data center infrastructure including power distribution units (PDUs), UPS systems, generators, and switchgear, • Design redundant and fault-tolerant power architectures (e.g., N+1, 2N), • Partner with Mechanical Engineering to ensure electrical designs integrate with enclosures, thermal systems, and physical layouts, • Support Manufacturing Engineering with design-for-manufacturability and build strategy input, • Provide technical guidance to production teams during build, test, and integration, • Ensure designs comply with applicable electrical codes and standards such as NEC, UL, IEC, and project-specific requirements, • Support UL-listed and customer-certified system designs, • Serve as a technical lead on assigned programs, • Support project planning, technical risk identification, and issue resolution, • Bachelor’s degree in Electrical Engineering or related discipline, • 8+ years of experience in electrical engineering roles within industrial, energy, or infrastructure environments, • Strong experience designing power systems across varying voltage and power levels, • Proven experience developing electrical schematics and documentation, • Experience with power generation, energy storage, or critical power infrastructure, • Experience with Battery Energy Storage Systems (BESS), • Experience with generator systems, paralleling switchgear, and backup power architectures, • Experience supporting modular data centers or mission-critical infrastructure, • Proficiency with SolidWorks Electrical, • Experience supporting UL-listed or code-compliant system designs, • Prior experience in modular, containerized, or engineered-to-order manufacturing environments

Job Description Coreslab Structures (ARIZ) Inc., a leader in the precast/prestressed construction industry is seeking a Precast Chief Engineer to join our team. Job Description The position of Precast Chief Engineer carries the responsibility of performing the design calculations and detailing for a given project, as well supervising and training of junior engineers. The Precast Chief Engineer will report to the Drafting and Design Manager. Duties and Responsibilities • Overseeing engineering designs and analysis required for a project including member design, connection design, handling and transportation, detailing, etc., • Create efficient and economic designs that are constructible., • Communicates internally with lead drafter, engineers, project manager, sales, estimating, production, and erection during throughout the project., • Communicates externally with Structural Engineer of Record and the Architect, • Perform various engineering checks during each phase of the drafting process to ensure engineering design and detailing is being followed., • Organize and maintain the project calculations in an orderly and professional manner., • Manage Coreslab Standard Connection and Designs, • Manage and train junior engineers., • Assist the production department with questions and or issues., • Design concrete repairs for remedial action when required., • Occasional site visit to perform a Field Report to ensure pieces are installed correctly and connections are being made per the erection details. Minimal Qualifications • Graduate of accredited University with a BS in Civil or Structural Engineering, • 5 to 10 years minimum experience in in the Precast Prestressed Concrete Field, • PE or SE License (AZ and NV Preferred or ability to obtain), • Proficient at reading contract documents as well as shop drawings and details, • Possess the knowledge and understanding of various building codes and design standards such as IBC, ASCE 7 ACI 318, AISC, PCI., • Proficient in Microsoft Office, MathCAD, F.E.M. Software, and can easily learn various engineering software programs used for design, • Basic proficiency in AutoCAD (Revit Preferred), • Knowledge of basic concrete repairs, • Strong Work Ethic, • Self-Motivated, • Highly Organized, • Capable of handling multiple projects in a face paced environment Benefits Package: • Medical, dental and vision coverage, • Life Insurance, • 401k, • Profit-sharing, • Paid vacation and sick time Application Process: Please complete the application online or apply in person Coreslab Structures (ARIZ) Inc. 5023 South 43rd Avenue Phoenix, AZ 85041 #hc107312

Job Description Key Responsibilities • Equipment Programming: Direct programming and optimization of SMT equipment, including Screen Printers, Pick & Place machines, and Reflow ovens., • Process Architecture: Design, implement, and improve workflows for CCAs, electronics box assemblies, and associated ground support equipment., • Tooling & Design: Utilize SolidWorks CAD to design specialized manufacturing fixtures and tooling for production technicians., • New Product Introduction (NPI): Partner with design teams to ensure manufacturability and validate processes for new space and aerospace-grade hardware., • Standards Compliance: Ensure all processes meet the rigorous requirements of IPC J-STD and NASA 8739 standards., • Continuous Improvement: Lead Lean and Six Sigma initiatives to analyze production data, troubleshoot inefficiencies, and implement corrective actions for complex electronic builds. Required Qualifications • Education: Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering (or a related technical field)., • Experience: 3+ years of experience in a manufacturing engineering role (5+ years preferred for senior-level placement)., • Technical Expertise: Strong understanding of manufacturing principles, process design, and quality systems within an electronics environment., • Software Skills: Proficiency with CAD software (SolidWorks) and SMT programming suites., • Compliance: Access to U.S. export-controlled information is required (U.S. Citizenship or Permanent Residency typically required)

Job Description We're not just offering a job, we're inviting you to be part of a team built on PARTNERSHIP, INNOVATION, EXCELLENCE, and SAFETY at Advanced Mechanical Arizona. • PARTNERSHIP means we work together with trust, loyalty, and an owner mindset, always striving for win-win outcomes., • INNOVATION drives us to think differently and create real value in everything we do., • EXCELLENCE pushes us to set high expectations and deliver exceptional results. We are part of Kelso Industries, which is comprised of 25+ (and growing) market-leading operating companies with over 2,600 employees that deliver unmatched HVAC, mechanical, refrigeration, plumbing, and electrical solutions. We are actively building the nation's preferred technical service partnership for commercial MEP+ ecosystems, empowering industrial, commercial, and institutional clients—including Fortune 500 companies and other industry leaders across the United States—with reliable, innovative service. Project Engineer – Mechanical Construction (MEP)About Us Kelso Southwest is a newly formed operating company within Kelso Industries, focused on delivering high-quality mechanical construction solutions across the Southwest. Backed by a national MEP+ platform, Kelso Southwest supports complex commercial and industrial projects while building strong teams, processes, and long-term client relationships. About the Role The Project Engineer supports the successful planning and execution of mechanical construction projects by assisting Project Managers and field teams with coordination, documentation, and communication. This role plays a key part in keeping projects organized, on schedule, and aligned with contract requirements while gaining exposure across the full project lifecycle. What You'll Do (Key Responsibilities) * Support Project Managers with day-to-day project execution and coordination * Review drawings, specifications, and contract documents for scope alignment * Track and manage RFIs, submittals, and project documentation * Maintain accurate and organized project files, drawings, and specifications * Coordinate with Superintendents, Foremen, subcontractors, and vendors * Assist with material submittals, procurement tracking, and delivery schedules * Participate in jobsite visits to support field coordination and verify progress * Assist with change order documentation, scope tracking, and pricing support * Support constructability reviews and coordination meetings * Assist with as-built drawings and project closeout documentation * Support jobsite safety documentation and compliance requirements * Communicate project updates and issues to the Project Manager in a timely manner What You'll Bring * Bachelor's degree in Construction Management, Engineering, or related field (preferred) * 3–5+ years of experience in mechanical construction or MEP environment * Ability to read and interpret construction drawings and specifications * Familiarity with mechanical systems (HVAC, piping, or industrial mechanical work) * Experience using Procore, Bluebeam, or similar construction software preferred * Strong organizational skills and attention to detail * Clear communication skills and a collaborative mindset What You'll Get * Competitive salary with performance-based incentives * Medical, dental, and vision insurance * Paid vacation, holidays, and sick time * Company-paid life insurance * 401(k) retirement plan with company match * Career growth opportunities within Kelso Southwest and Kelso Industries Why Join Us? We're committed to attracting talented individuals who seek a company with a strong foundation of success and an outstanding culture. We proactively provide competitive compensation, comprehensive benefits, and clear pathways for career advancement with autonomy and flexibility in an entrepreneurial environment. Learn more about us at

Job DescriptionSummary Join Expedient's AI CTRL product team as an AI Delivery Engineer, where you'll guide enterprise clients from contract signing to successful go-live of our AI platform. You'll manage implementation projects, coordinate across technical teams, and ensure customers smoothly integrate AI CTRL into their environments to achieve measurable business value. Key Responsibilities • Lead Implementation Projects: Manage multiple enterprise AI CTRL deployments simultaneously, owning timelines and deliverables from kickoff through go-live, • Client Management: Serve as the primary contact during implementation, conducting meetings, setting expectations, and translating technical concepts into business value, • Technical Integration: Connect client systems (CRM/ERP platforms, databases, cloud services) to AI CTRL, troubleshooting API connections, data formatting, and access issues, • Cross-Team Coordination: Collaborate with internal engineering teams to configure the platform according to client requirements, • Risk Management: Proactively identify and resolve project roadblocks while keeping deployments on schedule, • Customer Handoff: Transition clients seamlessly to Customer Success with complete documentation and enablementQualifications, • Experience: 2–5 years in technical project delivery, implementation engineering, or customer onboarding for enterprise software, cloud services, or AI/ML solutions, • Technical Skills: Comfortable with APIs, enterprise software systems (e.g., Salesforce), cloud services, and data integrations, • Communication: Excellent at explaining technical concepts clearly to both technical and executive audiences, • Mindset: Entrepreneurial, adaptable, and thrives in fast-paced environments with shifting priorities. Strong ownership mentality and passion for AI solutions Salary for this position will be based on your experience and your skills. Estimated salary range is $85,000 to $100,000 annually. WORKING FOR EXPEDIENT We prioritize ongoing education and continuous innovation to remain at the forefront of the information technology landscape. Our commitment to learning is reflected in our comprehensive employee training and tuition reimbursement programs, which are driven by our employees and funded by Expedient 100%. For our full-time employees we offer an exceptional benefits package including three weeks of paid time off annually that increases with tenure plus your birthday off and a health holiday to be used for preventive care. We offer parental leave, top-tier medical, dental, and vision, disability and life insurance, at an affordable rate, wellness engagement opportunities, and a 401(k) with a generous match. We also recognize the importance of a comfortable and convenient work environment. We offer a hybrid work model for many roles, paid parking and other perks. Expedient is an equal opportunity employer. Qualified applicants will receive fair and equitable consideration for employment without regard to their race, color, religion, national origin, gender, protected veteran status, disability, or any other characteristic protected by law. Powered by JazzHR a9m7qUs5bA

Job Description * This job is hybrid in Phoenix,AZ Our direct client has an opening for a Solution Architect – 9150 This position is up to 6 months, with the option of extension, and is located in Phoenix, AZ. If you are interested, please submit the following: YOUR CURRENT RESUME YOUR HOURLY RATE We can work w2 or corp to corp. Solution Architect – Data The Solution Architect – Data is responsible for contributing to the design, modernization, and optimization of enterprise-scale data systems, as well as the maintenance and operations strategy for CHP. This role involves designing and implementing data systems that organize, store, and manage data within our cloud data platform. The architect will perform continuous maintenance and operations work for CHP in the cloud environment. They will review and analyze CHP’s data infrastructure, plan future database solutions, and implement systems to support data management for CHP users. Additionally, this role is accountable for ensuring data integrity, making sure the CHP team adheres to data governance standards to maintain accuracy, consistency, and reliability across all systems. The architect will identify data discrepancies and quality issues, and work to resolve them. This position requires a strong blend of architectural leadership, technical depth, and the ability to collaborate with business stakeholders, data engineers, machine learning practitioners, and domain experts to deliver scalable, secure, and reliable AI-driven solutions. The ideal candidate will have a proven track record of delivering end-to-end ETL/ELT pipelines across Databricks, Azure, and AWS environments. Key Responsibilities • Design scalable data lake and data architectures using Databricks and cloud-native services., • Develop metadata-driven, parameterized ingestion frameworks and multi-layer data architectures., • Optimize data workloads and performance., • Define data governance frameworks for CHP., • Design and develop robust data pipelines., • Architect AI systems, including RAG workflows and prompt engineering., • Lead cloud migration initiatives from legacy systems to modern data platforms., • Provide architectural guidance, best practices, and technical leadership across teams., • Build documentation, reusable modules, and standardized patterns. Required Skills and Experience • Strong expertise in cloud platforms, primarily Azure or AWS., • Hands-on experience with Databricks., • Deep proficiency in Python and SQL., • Expertise in building ETL/ELT pipelines and ADF workflows., • Experience architecting data lakes and implementing data governance frameworks., • Hands-on experience with CI/CD, DevOps, and Git-based development., • Ability to translate business requirements into technical architecture. Technical Expertise Programming: Python, SQL, R Big Data: Hadoop, Spark, Kafka, Hive Cloud Platforms: Azure (ADF, Databricks, Azure OpenAI), AWS Data Warehousing: Redshift, SQL Server ETL/ELT Tools: SSIS Required Educational Background • Bachelor’s degree in Computer Science, Information Technology, Information Systems, Engineering, or a related field., • 6+ years of experience in data engineering or .NET development.

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Engineer III, IT Infra to join us in Chandler, AZ! Systems Engineer with experience designing, deploying, and managing enterprise grade datacenter infrastructure, including but not limited to, virtualization, storage, and networking. The individual will possess strong written and verbal communications skills, be comfortable presenting to audiences, and enjoy being part of a fast-paced, but rewarding technical environment. Essential Duties and Responsibilities: • Design and implement enterprise grade information systems and technology., • Manage and monitor multiple VMWare vCenter environments., • Ensure assets are responsibly and properly managed through life cycle., • Maintains overall system compliance with information security policies and procedures., • Design, deploy, and test disaster recovery solutions for global centralized and decentralized applications., • Manage Okta Identity Management platform for SSO and MFA., • Manage and oversee Office 365 enterprise tenant. Including but not limited to Azure AD, Exchange, Teams, OneDrive, SharePoint., • Manage Secure email gateway Mimecast and O365 ATP., • Management of Active Directory and it’s subcomponents – Group Policy, Sites and Services, DNS, etc., • Serves as technical subject matter expert for the resolution of issues related to private or hosted infrastructure., • Works towards cost effective solutions and enhancements to optimize functionality within the system. Research options, performs cost benefit analysis, and develops written recommendations., • Manages and tunes platforms to ensure expected availability, performance and security levels are achieved., • Develop and maintain scripts to automate tasks as needed., • Monitor server and network uptime. Makes recommendations to improve faults as needed., • Manage fleet of Windows servers., • Serve as escalation point to assist in troubleshooting of infrastructure issues., • Works independently or as a team member for multiple infrastructure related projects., • Experience managing VMWare vSphere including vcenter upgrades and migrations., • Experience storage technologies to include iSCSI, FC, CIFS/SMB, NFS (HPE Nimble/HPE MSA a plus)., • Experience with Linux and Windows Server OS., • Experience in scripting languages., • Experience in AWS or Azure IaaS. Educational/Certification Requirement: • Bachelor's degree in computer science, MIS, engineering, or a related field. Work Experience: • Minimum 4-year experience working in System Administrator Information Technology roles., • Minimum 1 year exposure to cloud platforms such as AWS, Azure, GCP.

Job Description Vynyl's technologists, designers and product strategists are experts at system modernization, new product development, and rescuing projects in distress. We use the best cloud-native and AI-enabled tools, and apply a battle-tested combination of Agile, Lean, and design thinking to collaboratively solve our client's most pressing challenges - and do it right the first time. We often work in regulated industries, such as healthcare, financial services, government and education. Our work helps detect diseases, identify kids who need special educational support, applies AI to support complex legal settlements, helps people access mental health services, and so much more. About the Role We are seeking an experienced, highly motivated Senior Full-Stack Engineer to join our growing team. The ideal candidate will be a strong collaborator with deep expertise in modern application development technologies and practices. The focus of this role is on building and maintaining robust, scalable, and high-performance applications across the full stack using TypeScript and some Python. Some experience with React and/or Angular would be helpful. This role requires not only technical proficiency but also a forward-thinking perspective on the role of Artificial Intelligence (AI) in modern software development. Candidates must demonstrate an active engagement with AI tools, understanding their practical use, current limitations, and the strategic opportunities they present for the engineering discipline. Mainly remote work: seeking candidates in the greater Los Angeles area to mainly work remotely with some on-site work required at times. Key Responsibilities • Lead the design, development, and deployment of complex features across both the frontend and backend of our clients' products., • Write clean, maintainable, and well-tested code using TypeScript for type safety and scalability on both the client and server., • Collaborate with product managers, designers, and other engineers to translate business requirements into technical solutions., • Collaborate with other team members to set technical standards, establish best practices, and make architecture decisions., • Actively research and evaluate new technologies, tools, and methodologies to improve the engineering process., • Demonstrate and articulate a practical understanding of AI tools (e.g., planning, code generation, intelligent testing frameworks) in daily engineering tasks, including their effective application and inherent limitations.Qualifications, • 5+ years of experience in full-stack software development., • Expert-level proficiency with TypeScript, including complex type definitions and advanced language features., • Strong experience with server-side development, including building and consuming RESTful APIs or GraphQL services (proficiency with Hono Framework is a plus)., • Proficiency with relational and non-relational databases, • Familiarity with modern CI/CD pipelines, containerization (Docker), and cloud platforms (primarily AWS, with experience in GCP and/or Azure a plus)., • Practical AI Tool Usage: Specific examples of AI tools used in professional or personal projects to enhance productivity, solve complex problems, or accelerate development. If you have a preferred agentic tool setup, please share!, • Understanding of AI Limitations: A clear understanding and articulation of the current technical, ethical, and accuracy limitations of modern AI tools in the engineering context., • Strategic AI Opportunity: A viewpoint on how AI tools create new opportunities for software engineering, such as shifting focus from boilerplate code to complex problem-solving or architectural design. The hiring process includes: • Initial Screening Call, • A Technical Assessment sent by email and returned by email Excellent health, dental, vision, and life insurance Excellent 401(k) plan with annual employer match of 4%

Job Description About Us Larson Design Group (LDG) is an award-winning, employee-owned Architecture, Engineering, and Consulting Firm. Guided by our core values, we’re expanding our team, opening new offices, and adding new offerings to provide responsive, innovative solutions to clients nationwide. Being 100% employee-owned directly impacts our culture: it drives our decision-making, motivates our teams, increases our productivity, improves retention, and contributes to the future success of our company. Our culture is one where we work hard for our clients and for each other – and we have fun collaborating, sharing experience and expertise, and learning along the way. We’re passionate about delivering exceptional quality, elevating client relationships, enriching the careers and lives of our employee owners, and enhancing the communities where we live and serve. At LDG, we strive to create an organization where people want to work. We offer a flexible work environment, paid training for required licensures, competitive benefits, bonus plans, and a company-funded Employee Stock Ownership Plan (ESOP) while supporting your professional and personal growth. Your Opportunity + Impact The Technical Manager will coordinate and direct technical teams to identify and accomplish goals by directing the integration of technical activities of a specific professional service. This position is responsible for the overall management of technical aspects of projects to include technical design, quality control, personnel management, scope, budgeting and financial performance. This position is responsible for managing technical teams job assignments to various projects and will work closely with Project Managers and other staff to ensure technical aspects are being met. The Technical Manager may also prepare and implement annual business goals and assist with multi-year strategic business plans. Key Responsibilities • Reviews and confirms accuracy of the work performed and methods used by technical team., • Creates and tracks project budgets & schedules and identifies potential issues., • Responsible for technical, quality, and financial performance of the technical team., • Answers questions and resolves issues brought forth by engineering, technical, and project teams., • Acts as the Designer of Record as required., • Communicates and collaborates with managers, clients, and contractors., • Conducts various tests and quality assurance checks to verify the quality of completed projects., • Assists in preparing workload forecasting reports and staffing plans., • Proposes and oversees budgets and timelines for engineering and/or technical projects., • Prepares and delivers various technical presentations, both internally and externally as needed., • Ensures compliance with all environmental, survey, and other rules, regulations, and permitting requirements., • Reviews contract plan and agreement documents for accuracy, as related to specific technical discipline., • Education: Bachelors or Master’s Degree in Architecture, Engineering or related discipline., • Experience: Minimum of fifteen (15) years’ experience in related discipline. Larson Design Group, Inc. is an Affirmative Action and Equal Opportunity Employer (EEO) that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization. Powered by JazzHR zk5KgK47qQ

Job Description We are currently seeking resumes from qualified, responsible, self-sufficient, energetic Drainage Project Engineer’s for our Phoenix, AZ office. The ideal candidate will be motivated to develop and build their personal knowledge and skills to assist with the growth and success of the office. We offer a friendly, professional atmosphere with excellent benefits and a salary commensurate with experience. Job Description: This role is to perform hydrologic and hydraulic analysis and design of street and highway drainage facilities including but not limited to storm drain systems, culverts, retention/detention basins, ditches, and channels. This position will require experience in preparing and supervising final design tasks including plans, specifications, and cost estimates. Responsibilities will also include marketing local agencies, design criteria compliance, quality control for transportation, and public works drainage. Duties: • Responsible for the completion of drainage-engineering project elements such as reports, designs, specifications, and plans, • Provides technical guidance to less experienced Engineers/EIT’s, • Works closely with other disciplines and multi-discipline projects, • Conducts design and constructability reviews of plans, • Provides support for final design review and quality assurance/control, • Coordinates design development and assists in providing technical direction, • Provides technical expertise in project aspects, • Works in collaboration with other offices within the company, • Work independently and supervise others to prepare final design plans and specifications, perform advanced hydrologic and hydraulic calculations, write and assemble drainage reports, • Experience working in a team environment is very important, • Should have the ability to take and to give design direction depending upon role on a given project Job Qualifications (Education, Experience, and Skills): • Minimum Education: Bachelor of Science Degree in Civil Engineering (BSCE) or a related field, • Minimum of five (5) years of design experience for AZ role., • P.E, Registration required in the jurisdiction of the position or ability to obtain within 6 months of hire, • Integrity and Highly Motivated, • Working knowledge of Microsoft Office, Microstation, Openroads, and AutoCAD, • River mechanics, erosion and scour calculations, and sediment transport training/experience a plus, • Experience using Project Wise or other file management/file-sharing software is a plus, • Knowledge of standard hydraulic and hydrology software is a plus (i.e. InRoads Storm and Sanitary, HEC-RAS (1D/2D), FLO-2D, HY-8, QGIS, StormCAD, SWMM), • Valid Driver's License, with the ability to maintain insurability under the company's insurance carrier Competencies (To perform the job successfully, an individual should demonstrate the following competencies): • Communicative – interacts openly with others; can maintain relationships, works well independently or with a team., • Consultative - Consults with other disciplines as needed; tolerates different perspectives or opinions., • Decisive & Action Oriented - Has a high level of energy and stamina; gets things done; makes sound educated but rapid decisions even when short of information; enjoys managing challenging projects and works well in fast-paced and pressure environments. Self-motivated and proactive, • Flexible - Adapts to new challenges and circumstances; able to multi-task; thrives on variety and frequently changing environments; creative problem solver. Resourcefulness, with minimal direction., • Analytical – Uses sound data, and procedures, and follows all laws, rules, and regulations but is a solutionist or problem-solver., • Conscientious and Organized – Believes professional integrity is paramount; understands the importance of project records; responsive to clients and deadline oriented; quality oriented. Working Conditions and Environment: This position will require general supervision and will have to use independent judgment within established guidelines. Generally, uses the advanced knowledge to analyze, interpret, or make deductions from varying facts or circumstances. Will need the ability to establish rapport quickly with others working on the same project, and be able to promote a positive team environment. Working knowledge of dealing with a diverse population while using tact, diplomacy, and respect. TYPSA, Inc. Culture: • Thinking toward future company and personal growth, • Yielding equity, inclusion, and diversity, • Passionate supporter of clients and teammates, • Shared comradery, • Action oriented and flexible TYPSA, Inc. Benefits: TYPSA, Inc. offers competitive salaries and a comprehensive benefits package, including medical, dental, life insurance, short and long-term disability, flexible spending accounts, Paid-time-Off, and a 401(k) plan. TYPSA, Inc. Overview: TYPSA in the United States is a multi-discipline engineering and environmental consulting firm assisting public and private clients in planning, developing, designing, constructing, and maintaining critical infrastructure projects across the United States. With offices in Arizona and California, TYPSA provides local expertise with the backing of a global network. Originally established in 1992 as AZTEC Engineering Group, Inc., the company began as a two-person DBE firm and grew into a trusted corporation serving clients nationwide. In 2006, AZTEC joined TYPSA Group, an international leader in engineering, architecture, and environmental consulting headquartered in Spain with more than 60 offices worldwide. Today, as TYPSA in the United States, we proudly carry forward the AZTEC legacy while connecting our clients to the resources, innovation, and international experience of the TYPSA Group. This integration allows us to deliver tailored local solutions with the depth and reach of a global firm. TYPSA, Inc. is an Equal Opportunity Employer committed to affirmative action planning and encourages diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, sexual orientation, gender identity, national origin, ancestry, disability, marital status, veteran status, housing status, or any other non-job-related characteristic under applicable law. Please apply online at .

Job Description Job Title: Welding Robotics Engineer - Senior Automation Engineer Location: Goodyear / Phoenix, Arizona Department: Engineering Employment Type: Full-Time | On-Site FLSA Status: Exempt About GTI Energy GTI Energy, a division of GTI Fabrication, designs and builds advanced modular infrastructure for mission-critical markets, including energy storage systems, data centers, and defense applications. We are growing rapidly and investing heavily in automation to increase capacity, precision, and efficiency at our industrial fabrication facilities. Position Overview We are seeking a Welding Robotics Engineer - Automation Engineer to lead the development, deployment, and optimization of automated robotic welding systems across our production lines. This is a hands-on technical role focused on designing, programming, integrating, and maintaining robotic welding cells with PLC controls. This position will play a key role in advancing GTI’s automation strategy, ensuring our fabrication processes achieve the highest standards of safety, quality, efficiency, and scalability. Key Responsibilities Automation Applications, Strategy & CapEx Justification • Partner with operations, manufacturing engineering, and quality to identify automation use cases that improve safety, quality, and throughput., • The Welding Robotics Engineer will develop capital expenditure justifications and ROI/payback analyses to support automation project funding., • Lead cross-functional project teams (quality, safety, operations, manufacturing engineering, and facilities) assigned to automation initiatives., • Develop specifications for individual automation projects and create GTI-wide standards for control systems, preferred robot manufacturers, and welding equipment OEMs., • The Welding Robotics Engineer will design, specify, and implement robotic welding cells for modular steel fabrication., • Select and oversee external integrators to execute detailed design work., • Lead internal and external design reviews to verify system safety, quality, and technical alignment., • Coordinate installation, validation, and qualification (IQ/OQ/PQ) of automation systems with integrators and plant teams., • Develop and modify PLC/HMI logic (Allen-Bradley, Siemens, etc.) to control robotic welding cells and integrate them with conveyors, positioners, and vision systems., • Write and optimize robot programs for MIG, TIG, and spot welding applications., • Provide hands-on support to troubleshoot automation systems and minimize downtime., • Lead preventive maintenance schedules for robotic welding systems and controls equipment., • Analyze production data to identify bottlenecks and quality issues., • The Welding Robotics Engineer will implement Lean and Six Sigma methodologies to drive continuous improvement in robotic welding operations., • Partner with mechanical engineers, manufacturing engineers, quality, and maintenance teams to ensure production readiness of automated systems., • Maintain detailed technical documentation including robot programs, schematics, and SOPs., • Train and mentor technicians, operators, and junior engineers on robotic welding system operation, troubleshooting, and programming. Required Qualifications • Bachelor’s degree in Mechanical, Electrical, Mechatronics, or Industrial Engineering, • 8–10+ years of experience in manufacturing automation or controls engineering, • Hands-on experience implementing and supporting robotic welding systems, • Proficiency with industrial welding robots (FANUC, ABB, Motoman, KUKA or similar), • Strong experience with PLC programming and controls integration (Allen-Bradley, Siemens, etc.), • Proven success leading cross-functional automation projects and managing integrators, • Strong understanding of welding processes (GMAW, GTAW, resistance spot welding) and metallurgy basics, • Knowledge of industrial safety standards (OSHA, NFPA79) and risk assessments for robotic systems, • Excellent analytical, problem-solving, and troubleshooting skills, • Strong project management skills to coordinate multiple automation projects and vendor integrations, • Experience with robotic simulation tools (RoboGuide, RobotStudio, etc.), • Experience integrating vision systems, sensors, motion control, or automated material handling, • Familiarity with CAD (SolidWorks, AutoCAD) for fixture or tooling design, • Lean Six Sigma Green Belt or higher certification Why Join GTI • Lead automation for a rapidly growing industrial fabrication company, • Hands-on, high-impact technical role in a fast-paced environment, • Competitive compensation and benefits, • Work with advanced robotic technology to build mission-critical infrastructure GTI Energy is an Equal Opportunity Employer. We are committed to fostering and maintaining a workforce that celebrates diversity. Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job DescriptionStructural Engineer | GTI FabricationCompany Overview GTI specializes in the design, engineering, and fabrication of custom modular structures, shipping container-based solutions, and ballistic metal fabrication. Serving DOD contractors, military, disaster relief, and commercial markets, all of our containerized and modular solutions are built in-house at our Buffalo, NY facility. Our capabilities include military training enclosures, bathroom/shower units, medical facilities, water treatment systems, electrical/energy storage enclosures, and more. Position Overview We are seeking an experienced Structural Engineer to assist in the design and analysis of prefabricated metal enclosures and steel structures. This role involves performing structural calculations, analyzing steel weldments, designing connections, and ensuring compliance with industry standards. The ideal candidate will be proficient in structural analysis software, FEA simulations, and fabrication drawing reviews. Key Responsibilities Structural Design & Analysis • The Structural Engineer will perform structural steel analysis and design to meet gravity, wind, and seismic building code standards., • Utilize RISA 3D structural analysis software for design validation., • Structural Engineers will conduct FEA analysis of weldment structures using SolidWorks Simulation., • Structural Engineers will review designs for manufacturability and collaborate with mechanical detailers and drafters., • Produce design calculation packages for customer submission., • Meet with customers regularly to discuss and coordinate design specifications., • Structural Engineers will work closely with GTI engineers and designers to ensure smooth project execution. ✔ Experience with modular structures or prefabricated enclosures Why Join GTI? ✔ Competitive pay and benefits ✔ Opportunity to work with cutting-edge modular solutions ✔ Collaborative team environment with growth opportunities GTI Fabrication is an equal opportunity employer, committed to fostering a diverse and inclusive workplace.

Job DescriptionAbout Us Virtuous is on a mission to inspire global generosity by helping nonprofits build better relationships with their donors. We offer a modern software platform that provides mid-sized charities with elegant tools for fundraising, marketing, volunteerism, and online giving. Our talented team is driven to disrupt the status quo in the nonprofit sector. We are hungry, humble, and committed to delivering best-in-class software solutions, customer success interactions, and sales experiences to the world’s leading nonprofits We also recognize the importance of giving back and making a difference in the communities where we live and work. That's why we practice radical generosity by volunteering at nonprofits or going the extra mile for our team and the customers we serve. We take our work seriously, but we don’t take ourselves too seriously. We believe that life is too short not to love what you do. The ideal candidate for Virtuous embodies our values by: * Asking questions with a spirit of curiosity * Giving feedback freely with candor & grace, welcoming it in return * Displaying a passion for philanthropy and technology * Serving with joy. Everyone is willing to make the coffee! * Celebrating the wins & milestones of others * Assuming good intent & demonstrating trust in others * Pursuing relationships with people different from themselves & creates space to be human Find our core values & more here. Position Summary Virtuous is evolving its data platform into an AI-ready foundation that powers trusted decision-making and self-service analytics across the company. We’re hiring a Lead Data Platform Engineer to design, build, and own the systems that power our data ecosystem. This role is ideal for a highly motivated self-starter who is comfortable with ambiguity and thrives at the intersection of systems design, business semantics, and AI enablement. This is not a traditional data engineering role focused on building one-off pipelines, dashboards, or ad hoc reports. Success in this role comes from designing and building durable platform capabilities — security models, access patterns, cost controls, and shared data foundations — that enable teams (and AI systems) to safely and confidently use data at scale. You’ll work closely with the Director of Data Operations as well as our Finance, Product, Engineering and Security Teams to ensure our data platform is accurate, governable, and ready to support AI-enabled workflows across the company. What You'll Build & Own Data Platform & AI-Enablement * Own the evolution of Virtuous’s data platform, primarily on Snowflake and dbt, as a secure, scalable, and AI-ready system. * Design data models, metadata, and access patterns that support natural-language querying and AI-assisted analysis. * Partner with Data Operations and Teams across the company to ensure data structures are accurate, reusable, and aligned with business definitions. * Prepare data foundations that allow AI tools to deliver consistent, timely, and trustworthy answers. * Ensure AI systems access data exclusively through governed service accounts and role-scoped permissions, with query activity auditable and restricted according to enterprise data classification and access standards. Access, Trust & Governance by Design * Architect and implement role-based access controls within Snowflake and related data systems (including row- and column-level security), ensuring enforcement aligns with enterprise IAM standards, approved access policies, and centralized identity governance processes. * In partnership with Security Operations and IT, translate approved enterprise access and compliance policies into enforceable platform-level controls, and maintain technical configurations to ensure ongoing alignment with those standards. * Ensure all platform-level access controls integrate with the enterprise identity provider (SSO, SCIM, role lifecycle management), and support automated provisioning, deprovisioning, and periodic access certification processes. * Build governance patterns that are enforced by design — not by manual process. * Support periodic access reviews and control validation processes in coordination with Security and Compliance teams, ensuring appropriate separation of duties between policy definition, approval, and technical implementation. Platform Leverage & Standards * Build and maintain CI/CD pipelines, testing strategies, and deployment patterns for dbt and Snowflake. * Design deployment, testing, and validation patterns that make accuracy the default. * Establish platform standards, templates, and best practices that enable others to move faster without sacrificing quality or security. * Increase the amount of trusted work the organization can do without increasing Data Ops involvement. * Reduce ad hoc work by building reusable systems and guardrails. * Act as a technical leader and thought partner across data-related initiatives. Reliability, Cost & Performance * Own Snowflake warehouse strategy, resource governance, and cost optimization. * Continuously improve performance, scalability, and reliability across the data platform. * Identify and eliminate inefficiencies that increase cost, risk, or operational overhead. * Collaborate with IT and Cloud Engineering to ensure Snowflake networking, storage integrations, and data movement patterns align with enterprise cloud security baselines, network segmentation standards, and infrastructure governance policies. What Success Looks Like * Teams reliably self-serve data and insights without increasing DataOps workload or risk. * AI-powered tools consistently answer business questions accurately, using governed data, with access enforced by role and context. * Data access, governance, and correctness are enforced by platform design rather than manual review or process. * Platform improvements materially reduce cost, operational risk, or time-to-insight. * Shared, trusted models replace bespoke datasets and one-off definitions. * At least one company-critical initiative (e.g., AI enablement, cost optimization, access expansion) succeeds specifically because of systems you designed and built. Who This Role is For * Care about leverage, durability, and outcomes — not just shipping artifacts. * Think deeply about how AI and automation change the role of data platforms. * Are highly self-directed and motivated, and take pride in ownership. * Thrive in ambiguity and are comfortable making decisions with incomplete information. * Are motivated by leverage, correctness, and long-term impact — not ticket volume or titles. * Readily navigate cross-functional tradeoffs to build shared data foundations that serve the whole company, not individual teams. You Must Have * 7+ years of experience in data engineering, platform engineering, or related infrastructure roles, with ownership of production systems. * Deep expertise in Snowflake, especially: * Roles and RBAC * Row-level and column-level security * Warehouse design and cost optimization * Performance tuning and governance * Strong experience using dbt to build and maintain shared data models, including macro development, testing strategies, source freshness, group model security implementation, and production deployment patterns.. * Advanced SQL skills and experience designing reliable ELT/ETL pipelines. * Proven systems-thinking mindset, with the ability to reason about tradeoffs across correctness, access, cost, and speed. * Clear communicator who can explain complex technical concepts to both technical and non-technical partners. Nice to Have * dbt certification strongly preferred * Experience enabling AI/ML or natural-language data access. * Familiarity with data observability, lineage, or metadata tooling. * Experience designing platforms for self-service analytics. * Exposure to BI tools such as Sigma, Looker, or Tableau. * Experience working in lean, fast-growing organizations where leverage matters more than headcount. What We Offer * Market competitive pay leveraging Carta data * Employee recognition through Bonusly (birthdays, anniversaries, achievements, etc.) * 401(k) retirement plan with company matching- 50% match up to 6% of compensation after 90 days * We value our employee’s work-life balance and encourage taking advantage of Unlimited PTO * Supportive time off including paid volunteer days and company holidays * Employer-contributed healthcare benefits, encompassing medical, dental, and vision coverage, with plans available for dependents and choices for Health Savings Accounts (HSA) and Flexible Spending Accounts (FSA). * 12 weeks primary parent leave, 4 weeks secondary parent leave - full pay (adoption as well) * We pride ourselves on Community and host exciting company outings and events. We’ve recently noticed an increase in recruitment scams where individuals are impersonating recruiters to obtain personal or financial information through fraudulent interviews and job offers. Please note that all legitimate communication from Virtuous will only come from the @virtuous.org domain. If you receive a message from other domains, even if they look similar (e.g., virtuouscareers.org or virtuousjobs.com), they are not legitimate and we recommend disregarding it immediately.

Job Description Job Title: Welding Robotics Engineer - Senior Automation Engineer Location: Goodyear / Phoenix, Arizona Department: Engineering Employment Type: Full-Time | On-Site FLSA Status: Exempt About GTI Energy GTI Energy, a division of GTI Fabrication, designs and builds advanced modular infrastructure for mission-critical markets, including energy storage systems, data centers, and defense applications. We are growing rapidly and investing heavily in automation to increase capacity, precision, and efficiency at our industrial fabrication facilities. Position Overview We are seeking a Welding Robotics Engineer - Automation Engineer to lead the development, deployment, and optimization of automated robotic welding systems across our production lines. This is a hands-on technical role focused on designing, programming, integrating, and maintaining robotic welding cells with PLC controls. This position will play a key role in advancing GTI’s automation strategy, ensuring our fabrication processes achieve the highest standards of safety, quality, efficiency, and scalability. Key Responsibilities Automation Applications, Strategy & CapEx Justification • Partner with operations, manufacturing engineering, and quality to identify automation use cases that improve safety, quality, and throughput., • The Welding Robotics Engineer will develop capital expenditure justifications and ROI/payback analyses to support automation project funding., • Lead cross-functional project teams (quality, safety, operations, manufacturing engineering, and facilities) assigned to automation initiatives., • Develop specifications for individual automation projects and create GTI-wide standards for control systems, preferred robot manufacturers, and welding equipment OEMs., • The Welding Robotics Engineer will design, specify, and implement robotic welding cells for modular steel fabrication., • Select and oversee external integrators to execute detailed design work., • Lead internal and external design reviews to verify system safety, quality, and technical alignment., • Coordinate installation, validation, and qualification (IQ/OQ/PQ) of automation systems with integrators and plant teams., • Develop and modify PLC/HMI logic (Allen-Bradley, Siemens, etc.) to control robotic welding cells and integrate them with conveyors, positioners, and vision systems., • Write and optimize robot programs for MIG, TIG, and spot welding applications., • Provide hands-on support to troubleshoot automation systems and minimize downtime., • Lead preventive maintenance schedules for robotic welding systems and controls equipment., • Analyze production data to identify bottlenecks and quality issues., • The Welding Robotics Engineer will implement Lean and Six Sigma methodologies to drive continuous improvement in robotic welding operations., • Partner with mechanical engineers, manufacturing engineers, quality, and maintenance teams to ensure production readiness of automated systems., • Maintain detailed technical documentation including robot programs, schematics, and SOPs., • Bachelor’s degree in Mechanical, Electrical, Mechatronics, or Industrial Engineering, • 8–10+ years of experience in manufacturing automation or controls engineering, • Hands-on experience implementing and supporting robotic welding systems, • Proficiency with industrial welding robots (FANUC, ABB, Motoman, KUKA or similar), • Strong experience with PLC programming and controls integration (Allen-Bradley, Siemens, etc.), • Proven success leading cross-functional automation projects and managing integrators, • Strong understanding of welding processes (GMAW, GTAW, resistance spot welding) and metallurgy basics, • Knowledge of industrial safety standards (OSHA, NFPA79) and risk assessments for robotic systems, • Excellent analytical, problem-solving, and troubleshooting skills, • Strong project management skills to coordinate multiple automation projects and vendor integrations, • Experience with robotic simulation tools (RoboGuide, RobotStudio, etc.), • Experience integrating vision systems, sensors, motion control, or automated material handling, • Familiarity with CAD (SolidWorks, AutoCAD) for fixture or tooling design, • Lead automation for a rapidly growing industrial fabrication company, • Hands-on, high-impact technical role in a fast-paced environment, • Competitive compensation and benefits

Job Description PROJECT TOOLING ENGINEER-Injection Molding We are looking to add a Project Engineer to our team of employee-owners for our facility in Seneca, SC. Responsibilities: • Quote injection mold tooling and piece-part pricing for new and existing customers., • Work with customers on design tooling modifications., • Testing and establishing/improving process cycles for new and existing tooling., • Applying lean manufacturing and automation knowledge to analyze process/tooling for improvements. Communication/Organizational Skills: • Requires professional communication skills to communicate both internally and externally with all departments and customers. Education/Experience: • Engineering degree (Bachelor’s) preferred and plastics experience required., • Solidworks experience preferred., • Project Management experience preferred. Work Location: In person Phoenix, AZ Pay: Competitive based on experience

Job DescriptionSalary: $65K-$85K Summary Completes and supports construction and field execution responsibilities for underground utility projects utilizing construction fundamentals and company best practice standards, processes, resources, and tools. Responsibilities • Work on and visit project work sites, review scope of work, prepare cost estimates and proposals, and assist in management of the project including the permitting process., • Assist with the evaluation of projects for constructability and value-engineer cost savings as well as monitoring compliance with contract documents., • Establish, monitor, update, communicate, and maintain project schedules utilizing Microsoft Project or other software programs., • Manage the preparation, review, tracking, and distribution of submittals and RFIs., • Assist the PM/PE to develop and implement strategies to self-perform and to outsource the various aspects of a project to achieve the projects objectives of price, schedule and quality., • Review subcontracts and purchase orders to help the PM/PE assure that all project goals are being addressed., • Proactively identify issues that could lead to problems and facilitate their solutions., • Participate in project progress meetings., • Assist the PM/PE to manage project costs to assure that budgets are maintained., • Document and manage changes in the work including design changes, specifications, and drawings and, • Understand project status to secure the interests of the entire project team, • Help prepare customer billings and related documentation as requested., • Assist in the project closeout process to assure timely completion Qualifications and Education Requirements • Bachelor's degree in construction management, engineering, or equivalent., • 2+ years of experience as a project engineer., • Prior wet utility contracting experience preferred., • Computer knowledge and efficiency including Microsoft Office products including Microsoft Project, Word, and Excel., • Experience in project estimating/management software (Bid2Win Suite, Bluebeam, Microsoft Project, Procore) a bonus., • Strong verbal and written communication skills., • Ability to read drawings and specifications and follow instructions., • Flexible with work locations depending on assigned projects., • Ability to occasionally lift 25 pounds., • Ability to occasionally walk one continuous mile. Notice to all Employment, Staffing, and Recruiting Agencies and Recruiters: Do not directly email, call, message, or visit our hiring managers. B&F Contracting does not accept unsolicited resumes. Should any be received from a third party, they will not be considered unless a signed agreement is already in place. If you would like to discuss becoming a preferred staffing vendor for B&F, please contact our Human Resources team, who will advise you on the process.

Job Description Job Summary The Advanced Design & Development is seeking an experienced R&D Aircraft Systems Engineer role responsible for conducting research & development activities that include requirements development, system definition, prototyping and validation of new designs. The work ranges from simple electrical/electronic prototyping to integration of complex systems in labs and on aircraft in an R&D environment. Systems in scope include electrical systems, electrical power generation, flight controls, avionics, autopilot systems, motor controls, antennae, and navigation systems. This position necessitates multi-disciplinary collaboration to develop new systems. The ideal candidate is a curious self-starter, thrives in a creative environment where complex problems need new solutions, and can balance analytical skills with pragmatic hands-on prototyping. The lifecycle of projects ranges from early concepts through transition into formal programs. Duties and Responsibilities/Essential Functions • Design and prototype electrical and electronic systems using mockups, prototype tools, integration labs, flight test assets, as well as via flight test., • Collaborate with multi-disciplinary teams and third parties to achieve shared goals. Team player., • Execute assignments and drives results with minimal guidance., • Develop and validate functional and performance requirements of system requirements based on exploratory R&D., • Hands-on building of systems using a mix of hand tools and common industrial equipment available in electrical/electronics labs., • Develop and execute test plans to evaluate prototypes using test and validation equipment., • Generate engineering documentation, such as schematics and wiring diagrams, in accordance with company procedures to develop and evaluate design data for future platforms., • Participate in the developmental installations and evaluations of test aircraft. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Education and/or Experience: • Bachelor’s degree or greater in a technical field related to Electrical or Aerospace Engineering, • Minimum of 10 years industry experience in aerospace, • Competent in electrical and electronic system design tools and practices., • Track record driving results under uncertainty during the earlier stages of development, • Ability to work independently as well as part of a highly functioning team., • Proficiency using industry equipment such as a soldering iron, digital voltmeter, oscilloscope, function generator, and spectrum analyzer, • Experienced with prototyping methods & tools, including some programming (Python, Raspberry Pi, etc.)., • Experienced with integration labs with National Instruments equipment and Matlab System Composer., • Strong communication skills: document and demonstrate sound rationale for design choices., • Familiar with systems engineering practices and associated tools, such as JAMA., • Knowledgeable in one or more of the following or similar: Capital, LTSpice, Visio, MatchCAD, • Familiar with one or more of the following, or similar: Windchill, and Atlassian Jira, • Familiar with common office tools: Microsoft Office (Excel, Word, and PowerPoint) and Microsoft Power Bi., • Lead generating system and simulation models using Matlab, Raspberry Pi, Python, etc., • Lead with National Instruments LabView and Matlab of hardware-in-the-loop simulators, conducting testing and troubleshooting of HW/SW interfaces, • Experience with developmental flight testing., • Pilot experience desirable. To perform the job successfully, an individual should demonstrate the following competencies: • Manages Ambiguity, • Develops Talent, • Plans and aligns, • 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting., • Employer-Paid Coverages: Group term life, short- and long-term disability insurance., • Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options., • Free Health Tracking: With rewards for meeting health goals., • Generous PTO: 160 hours accrued within the first year., • Employee Referral Bonus: For referring talented candidates., • Career Development: Tuition reimbursement and professional growth opportunities., • Exclusive Discounts: Access to partner and marketplace discounts. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

Job Description About Us Larson Design Group (LDG) is an award-winning, employee-owned Architecture, Engineering, and Consulting Firm. Guided by our core values, we’re expanding our team, opening new offices, and adding new offerings to provide responsive, innovative solutions to clients nationwide. Being 100% employee-owned directly impacts our culture: it drives our decision-making, motivates our teams, increases our productivity, improves retention, and contributes to the future success of our company. Our culture is one where we work hard for our clients and for each other – and we have fun collaborating, sharing experience and expertise, and learning along the way. We’re passionate about delivering exceptional quality, elevating client relationships, enriching the careers and lives of our employee owners, and enhancing the communities where we live and serve. At LDG, we strive to create an organization where people want to work. We offer a flexible work environment, paid training for required licensures, competitive benefits, bonus plans, and a company-funded Employee Stock Ownership Plan (ESOP) while supporting your professional and personal growth. Your Opportunity + Impact The Engineering Associate is an entry-level technical role who is on the professional Engineer license track that will apply basic to intermediate engineering principles to complete design computations, prepare written technical reports, design plans, and details. The Engineering Associate may be called upon to make minor project decisions. Key Responsibilities • Prepares and reviews design computations, plan designs, and drawings., • Reviews submittals and coordinates project submissions., • Prepares and reviews specifications, draft letters, and written technical reports., • Completes inspections and field work assignments as needed., • Researches, reviews, interprets, and understands written regulations, code compliance, and permit requirements and applies them to design projects., • Maintains appropriate documentation of work and project records., • Possesses knowledge of Codes and Standards applicable to project designs., • Develops technically accurate, clean, and deliverable drawings., • Promotes, utilizes, and supports quality assurance and quality control processes to improve the quality of deliverables and reduce design errors and omissions., • Education: Bachelor’s or Master’s Degree in position relevant Engineering field from ABET accredited school., • Experience: No previous relevant work experience is required. Prior internships in the A/E industry is preferred., • Demonstrates a strong desire to expand knowledge and take on new responsibilities within the engineering field., • Proficient in Revit, AutoCAD Civil 3D, to be used for Site Layout, Grading, Utility, and Storm Water Management Plan design and/or other discipline-specific programs preferred., • Proficient in Microsoft Office Suite (Excel, Word, Power Point, Outlook)., • Excellent organizational and time management skills to handle multiple tasks and meet project deadlines effectively. Larson Design Group, Inc. is an Affirmative Action and Equal Opportunity Employer (EEO) that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization. Powered by JazzHR VkJijd60gI

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. Role We are seeking a highly skilled and experienced Electrical Engineer to join our team. The Electrical Engineer will be responsible for designing, developing, and overseeing the implementation of electrical systems and components. Our ideal candidate is self-motivated, goal-oriented, and driven to accomplish department goals. This is an opportunity for a long-term position and to join a growing company. Responsibilities • Generate construction documents via AutoCAD including electrical site plans, single line diagrams, and detailing, • Prepare and procure all appropriate permits for building and construction in appropriate jurisdiction, • Review contractor product shop drawings, • Responding to contractor requests for information, • Conduct field investigations of existing conditions for accurate design implementation as well as during construction to assure product quality, • Preparation of project close out and as-built documentation, • Research and Development of methods and product types to enhance project delivery model., • Development of company engineering standards of design, • Prepares product reports by collecting, analyzing, and summarizing information and trends, • Maintains product and company reputation by complying with federal and state regulations Qualifications • 4 years’ experience as an Electrical Engineer (not required but preferred), • Minimum BS in electrical engineering from an accredited college or university, • Proficiency in Microsoft products, particularly Office (Excel, Word, Email), • Skilled in BIM and use of Autodesk products, particularly AutoCAD, • Able to utilize Adobe Acrobat software, • Excellent verbal and written communication skills, • Exceptional time management, accountability, and prioritization skills, • Self-motivated, goal- oriented, and driven to accomplish department goals, • Ability to be organized, problem solve, and be solution oriented, • Ability to support a fast paced, demanding work schedule; could include late evenings and/or weekends Compensation and Benefits • 10 Paid Holidays, • Flexible Time Off, • 401(k) Company Match, • Health, Dental, and Vision Insurance, • HSA and FSA, • Disability & Occupational Accident Insurance, • Company-Paid Life Insurance Policy, • Employee Assistance Program (EAP)

Job Description Title: Junior Azure DevOps Engineer Location: Phoenix, AZ (onsite or hybrid) Type: Contract This role supports the development and improvement of cloud delivery pipelines and Azure-based infrastructure. You will work alongside senior engineers to assist development teams with deployment automation, cloud configuration, and platform stability. This position provides hands-on exposure to DevOps practices while helping connect engineering, security, and operations to deliver reliable cloud solutions. Your role: · Assist in building and maintaining CI/CD pipelines using Azure DevOps, GitHub, or GitHub Actions to support application delivery. · Support automation of build, testing, and deployment workflows for web applications, APIs, and cloud-based solutions. · Help manage branching, versioning, and release processes under senior guidance. · Provision and support Azure services including App Services, virtual machines, storage, SQL databases, and networking components. · Contribute to Infrastructure as Code efforts using tools such as ARM, Bicep, or Terraform. · Support secure and scalable Azure environment configurations. · Assist with embedding security scanning, secrets management, and vulnerability checks into deployment pipelines. · Monitor applications and infrastructure using Azure Monitor, Log Analytics, and Application Insights. · Troubleshoot infrastructure and deployment issues in collaboration with senior engineers. · Document technical processes and contribute to architecture discussions as needed. · Collaborate with cross-functional teams to support reliable and efficient cloud operations. What you’ve got: · Hands-on experience or strong foundational knowledge of Microsoft Azure services and cloud concepts. · Understanding of Azure networking, identity, and security fundamentals. · Exposure to containerization tools such as Docker and basic knowledge of Kubernetes or AKS. · Familiarity with Azure DevOps or GitHub Actions for building pipelines. · Exposure to Infrastructure as Code tools such as ARM, Bicep, or Terraform. · Scripting knowledge in PowerShell, Bash, or Python. · Working knowledge of Git version control. · One to three years of experience in cloud, DevOps, or infrastructure-focused roles. · Experience supporting .NET applications including C#, ASP.NET, Web API, or SQL is preferred. · Strong problem-solving ability and willingness to learn in a collaborative team environment. · Clear communication skills and ability to work effectively with technical teams.

Job Description Paragon Services, located in Phoenix, AZ and serving the needs of our customers throughout the valley is currently seeking qualified candidates for Building Engineer positions to be assigned to various locations within the Phoenix area that possess basic building maintenance experience along with HVAC, Plumbing and Electrical. Minimum Qualifications: • The ability to pass drug screening and a background check prior to being hired., • Reliable vehicle with current registration, proof of insurance and valid driver’s license., • Minimum (3) years trades or commercial real-estate experience. Essential Responsibilities: HVAC troubleshooting and preventative maintenance, (Heat Pump, Evaporative Coolers, Package and Split systems.) Obtain and compare estimates for work to be performed by outside vendors to insure proper competitive bid processes, Electrical: Re-lamping, ballast replacement and reset breakers, Plumbing fixture repairs, drain maintenance and restroom preventative maintenance, Adjust doors and closers, repair T-bar drop ceiling grid and replace ceiling tiles, Perform Inspection, Maintenance and Repair of the buildings mechanical systems to insure good working order, Perform visual roof inspections and make minor repairs as needed, responsible for maintaining utility and storage rooms in a clean, neat appearance insuring materials are not stored improperly, respond to assigned work orders from property management, perform general labor as assigned by management team, Painting, exterior facade repairs, general R&M. Attributes: • Excellent customer service skills, • Communications skills, • Multi task oriented, • Team player Education/Experience: High school diploma or general education degree (GED); 3 years previous related experience and/or training; or equivalent combination of experience/education. Trade certifications highly valued. Communications: Ability to read and comprehend instructions, short correspondence and E-mail. Ability to write simple correspondence and effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization. Physical: This position will require the engineer to regularly sit, walk, bend, reach, touch, feel, handle, hear and talk. The engineer will need to possess the ability to lift and/or move up to 50 pounds and be comfortable with working on ladders and rooftops. Company DescriptionParagon Services maintains over 120 sites with an engineering staff of over 250 employees. Driven by a commitment to exceed all metrics of performance while advocating our partners interest, Paragon Services has become a premier engineering services provider in the commercial real estate market. Dedication to the welfare of its employees and the promotion of industry advancing programs is a paramount tenet of Paragon's philosophy. Paragon has spearheaded educational programs designed for engineers with the cooperation of local industry professionals. Encouraging the development of skills and promoting life skills advancement has significantly contributed to Paragon's low turnover rate and increased quality of services to our clients. Currently, Paragon Services provides comprehensive engineering solutions to our customers in Arizona, California and Nevada and Utah. We take great pride that our success is directly related to our customer confidence in our work and look forward to the opportunity to prove to you why we have earned our standing as a leader in the building maintenance industry.Paragon Services maintains over 120 sites with an engineering staff of over 250 employees. Driven by a commitment to exceed all metrics of performance while advocating our partners interest, Paragon Services has become a premier engineering services provider in the commercial real estate market.\r\n\r\nDedication to the welfare of its employees and the promotion of industry advancing programs is a paramount tenet of Paragon's philosophy. Paragon has spearheaded educational programs designed for engineers with the cooperation of local industry professionals. Encouraging the development of skills and promoting life skills advancement has significantly contributed to Paragon's low turnover rate and increased quality of services to our clients.\r\n\r\nCurrently, Paragon Services provides comprehensive engineering solutions to our customers in Arizona, California and Nevada and Utah. We take great pride that our success is directly related to our customer confidence in our work and look forward to the opportunity to prove to you why we have earned our standing as a leader in the building maintenance industry.

Job Description Project Engineer Dibble CM is looking for a motivated Project Engineer who is ready to join our Team. As a Project Engineer, you'll be part of a collaborative team of professionals dedicated to delivering critical public infrastructure projects that serve our communities. Responsibilities • Project document control, • Manage distribution of submittals and requests for information, • Project cost review, monitoring and reporting, • Schedule review and management, • Meeting coordination, • Bachelor's degree in Construction Management, Construction Engineering, Civil Engineering or similar., • Minimum of 2 years' experience working on public works construction projects., • Proficiency in reading and understanding civil project plans and specifications., • Familiarity with construction management software., • Good written and verbal communication skills. Benefits • 100% premium-paid major medical, dental and vision coverage for employees and their families, life, short-term disability, long-term disability, a 401(k) plan with match and no waiting period, generous paid time off, 7 paid holidays, and tuition reimbursement programs including some that dependents are eligible for!, • Our people-focused culture is important, and we consider our employees to be our greatest asset. This culture is why we have so many long-term employees with our firm. Our employees enjoy an industry-leading benefits program, the ability to balance their home and work life, opportunities for growth and development, company activities, and various opportunities to give back through community service. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this Resident Engineer position, please fill out our initial 3-minute, mobile-friendly application which you will find on our web site. We look forward to meeting you! Dibble CM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Job Posted by ApplicantPro

Job Description Path Construction is seeking qualified college graduates to join our organization in the Phoenix, AZ area. We are a rapidly growing commercial general contractor with offices in Arlington Heights, IL; Charlotte, NC; Knoxville, TN; Tamp, FL; Dallas, TX; and Phoenix, AZ working on projects throughout the United States. Typical duties of a Project Engineer includes managing day-to-day activities of subcontractors and suppliers, contract administration, procurement, estimating, pay requests, change orders, requests for information, cost control, scheduling, tracking submittals, maintaining and delivering a high level of quality. The right candidate will have construction management internship experience on large and/or small projects and varying asset classes including, but not limited to, Higher Education, Retail, Multi-family, Hospitality, Healthcare, Restaurant, Transportation, Water and Waste Treatment, Self-Storage, Senior Living, Convention Centers, Laboratories, Correctional, etc. Path is looking for people with great technical skills, good communication skills, and strong attention to detail. About the Company Founded in 2008, Path Construction is a general contractor providing a vast array of construction services to multiple regions throughout the country. Our expertise is very diverse and includes experience on small and large projects of many different types, including but not limited to: healthcare, hospitality, higher education, multi-family, self-storage, senior living, transportation, water and waste treatment, convention centers, laboratories, and correctional. The main philosophy and strategy for the growth of our organization is to be on the cutting edge of all aspects of the construction process. Additionally, our unmatched customer satisfaction and, most importantly, the development and quality of our people drive our success. For more about us, please visit our website at . Duties for an Project Engineer include: • General Contract and Subcontract administration, • Monitor and document jobsite safety and accident prevention, • Construction Scheduling, • Material & Equipment – procurement and expediting, • Process RFI’s, • Receive, • Review, • Submit, • Log, • Shop drawing and submittal review and coordination, • Project cost review, reporting, updating and accounting, • Review of subcontractor applications for payment, • Participation in and documentation of project coordination meetings, • Supervision and coordination of subcontractors’ field installations, • Review and negotiate change proposal pricing from subcontractors, • Prepare change proposals, • Change order documentation and associated cost reporting and maintenance, • Research and suggest options on construction means, methods and equipment, • Quality control, • Project Closeout, • Implement all applicable Safety Programs and EEO/Affirmative Action Programs on the Project Requirements • A 4 year degree in Building Construction, Engineering, or a related field, • Building and construction management internship experience, • OSHA Site Safety Experience, • Up-to-date with modern technology and display excellent communication skills, • General knowledge of construction principles/practices required, • Strong work ethic and desire to work in a team environment and grow the company, • Must have a valid driver’s license with a positive motor vehicle record, • Working knowledge of project management process and software. (Microsoft Office and SAGE 300 CRE), • Proficient in Microsoft Office, • Ability to lift and carry items weighing up to 30 pounds Preferred • Public work experience is a plus, • Estimating experience is a plus, • Self Perform experience is a plus, • OSHA 30 Hour Training, • Competitive Compensation, • Certification Training, • 401(k), • Health, Dental, Vision, Life, Long-Term and Short-Term Disability Insurance, • Company cellphone and computer

Job Description Millwork Engineer JBI LLC., dba Western Millwork, Arizona’s largest manufacturer and installer of Architectural Millwork and Casework seeking experienced Engineer to join our drafting/engineering department. REQUIRED ESSENTIAL DUTIES/ RESPONSIBILITIES: Able to read and interpret Architectural drawings. Proficient in AutoCAD. Review scope with team and produce detailed submittal drawings from drawings, scope, and additional information provided by team. Be familiar with typical millwork/casework, trims, and paneling - and their construction. Basic computer skills include, but not limited to, AutoCAD, Microsoft Word, Excel, Outlook, Acrobat reader and basic web/file folder navigation. Excellent communication skills, problem solving abilities, teamwork, time-management skills, and strong attention to detail. Microvellum experience is a plus. Western Millwork will train the right candidates. JOB QUALIFICATIONS: · Bachelor’s Degree or equivalent preferred, not required. · 3+ years engineering experience in architectural millwork manufacturing. · High proficiency in AutoCAD and library use. Experience with Microvellum preferred. · Knowledge of CNC programming and operations. · Knowledge of Architectural Woodwork Standards. · Excellent written and verbal communication skills are required. · Must be self-motivated and team oriented. · Comfortable with a deadline driven schedule with strong time management skill. We request samples of work for review if available. Company DescriptionWestern Millwork dba JBI Interiors specializes in high end Custom Commercial Architectural Woodwork and Finish Carpentry. We pride ourselves in getting the job done on time, we excel at being the best in our industry.Western Millwork dba JBI Interiors specializes in high end Custom Commercial Architectural Woodwork and Finish Carpentry. We pride ourselves in getting the job done on time, we excel at being the best in our industry.

Job DescriptionDescription: Individuals assigned to this classification will perform engineering calculations and must be able to layout and design systems in accordance with established policies, standards, procedures, code and shall exercise judgment in their application with minimal to no supervision. Individuals should be able to apply practical knowledge and experience in their field to resolve problems and conflicts related to the projects assigned to them. Individuals should be capable of independent decision-making for engineering tasks on the projects assigned to them. Individuals may occasionally supervise subordinate personnel or assist other engineers or designers. Qualifications: • Individuals assigned to this classification will perform engineering calculations and must be able to layout and design systems in accordance with established policies, standards, procedures, code and shall exercise judgment in their application with minimal to no supervision., • Individuals should be able to apply practical knowledge and experience in their field to resolve problems and conflicts related to the projects assigned to them., • Individuals should be capable of independent decision-making for engineering tasks on the projects assigned to them., • Individuals may occasionally supervise subordinate personnel or assist other engineers or designers., • Knowledge of discipline specific codes and other building codes., • Possess excellent verbal and written communication skills., • Good leadership skills to educate client on design and other project requirements., • Meet with the Project Engineer and the Project Manager to discuss the design scope, schedule, budget, phasing, site issues, and design review issues., • Work with Project Manager and Project Engineer to prepare design budgets and schedules., • Estimate discipline man-hours required to complete the design requirements of a project., • Provide leadership and assign design job functions to designated designers and supervise their efforts in completing the project on time and within budget., • Implement system types as selected by the Project Engineer and provide complete., • construction documents that match the client and project team’s requirements., • Review preliminary and final engineering design with other disciplines for function, clearances, coordination, and final design selection., • Perform a final review of the engineering drawings., • Client contact., • Perform quality assurance on projects in coordination with technical manager or project engineer., • Mentor and motivate Engineering designers I, II and III. Set high standards, Professional integrity and seeks for the company and client best interest., • Active Listening, • Critical Thinking, • Proficient in REVIT, • Proficient in Engineering Modeling tools Researching and writing reports/opinions., • Excellent written and oral communication., • Proficient in Microsoft Office tools, • Excellent Time Management, • Equipment selection, • Excellent judgement and decision making, • Superior Benefit Packages for the whole family and of course the pets too!, • Generous 401(K) company match – show me the money!!, • Generous PTO – vaca time!, • Casual “uncorporate” working environment – Jeans and Hey Dudes!!, • Employee Entertainment Benefits Discount Program., • License renewals 100% paid by company., • Professional membership renewals 100% paid by company., • Continuing education lunch-n-learns, and industry convention attendance encouraged!, • Sign on bonus’., • Relocation available., • Tuition Reimbursement Program., • Company sponsored charity events to participate in!, • Our Licensing Specialist loves to deal with the licensing boards and handles all the tedious forms, so you won’t have too!, • Fully staffed Permitting department – they know how to deal with the jurisdictions!, • Highly skilled Designers in our Design Department – they love turning ideas into reality!, • Various sectors of business to include - Grocery, Retail, Big Box, Power Centers, Senior Living, Restaurant, Industrial, Multi-family, Convenience – We love bringing communities to life!, • We have experts in MEP, Fire Protection and Structural who tackle the technical issues!

Job Description 📢 Now Hiring: Facilities Fire Protection Engineer Location: Tempe & Peoria, AZ (Onsite – Construction & Operations Support) - starts in both locations, and then will transition to Peoria, AZ Employment Type: Full-time with 10% bonus Work Authorization: Due to the nature of the projects, candidates must be US Citizens or Permanent Residents Only We are seeking a skilled and proactive Facilities Fire Protection Engineer to support the design, construction, and operations of a large-scale, high-tech manufacturing facility. This role will lead efforts to ensure all fire alarm, fire protection, and hazardous gas monitoring systems are compliant, operational, and optimized to safeguard people and infrastructure. 🔥 What You’ll Do: * Lead fire protection efforts during construction and transition into operational support * Ensure compliance with NFPA, ICC, AHJ, and insurance requirements across all systems * Review and guide design documents and third-party vendor submissions * Operate and maintain fire alarm, suppression, and hazardous gas monitoring systems * Conduct system inspections, perform maintenance, and identify system malfunctions * Develop and lead fire drill plans and emergency response readiness * Create testing, commissioning, and maintenance documentation for fire protection systems * Interpret construction drawings, verify installation quality, and provide improvement recommendations ✅ What You Bring: * Bachelor’s Degree in Engineering (Associate’s with additional experience may be considered) * 3+ years of experience in large-scale fire protection system design, operation, and compliance * Familiarity with detection, suppression, and life safety systems * Strong working knowledge of NFPA, ICC, and AHJ requirements * Ability to review design documents and oversee construction compliance * Proficient in Microsoft Office and technical drawing software * Strong communication, coordination, and problem-solving skills * Ability to work on ladders, at elevation, and in confined spaces * Willingness to work overtime or respond to off-hours emergencies as needed ✨ Preferred Qualifications: * Experience in high-tech, cleanroom, or industrial manufacturing environments * Familiarity with utility operations, energy efficiency initiatives, or environmental facility systems * Prior involvement in commissioning or facilities engineering projects * Trade certifications or licensing related to fire protection systems This is a unique opportunity to take ownership of critical life safety systems at a state-of-the-art facility from construction through operations. If you're ready to make a meaningful impact through smart, compliant, and proactive fire protection engineering—we want to hear from you. 📨 Apply today and help build and protect the future.

Job DescriptionDescription: Southwest Building Solutions is a well-established Arizona construction company with a strong reputation for delivering high-quality steel buildings and site-built projects. We are known for practical, buildable engineering, strong coordination with construction teams, and getting projects through permitting efficiently. We’re hiring a Civil Engineer with experience in grading, drainage, and foundation design who can also perform basic structural calculations for metal buildings and foundations. This role is ideal for an engineer who wants hands-on design responsibility, steady project flow, and direct collaboration with builders — not endless redlines or siloed consulting work. Position Overview You’ll be responsible for preparing civil site plans and foundation designs for commercial and residential projects across Arizona. This role blends civil engineering with practical structural support and plays a direct role in moving projects from concept through permit and construction. Important: This is an in-office position in Peoria, AZ. Candidates must currently reside in Arizona and hold an active Arizona PE license. Requirements: Qualifications • Bachelor’s degree in Civil Engineering or related field, • Licensed Professional Engineer (PE) in Arizona (required), • 5+ years of civil engineering experience, • Strong experience with grading, drainage, and foundation design, • Working knowledge of basic structural calculations for metal buildings and foundations, • Proficiency with AutoCAD Civil 3D or similar design software, • Solid understanding of Arizona codes, grading, and drainage regulations, • Ability to work independently and manage multiple projects, • Strong attention to detail and problem-solving skills Compensation & Benefits • Base salary range: $110,000–$150,000 (DOE), • Medical, dental, and vision insurance, • Group term life insurance, • 401(k) with company match, • Paid time off (PTO) and paid holidays, • Long-term growth and advancement opportunities Why Join Southwest Building Solutions • Established company with a strong reputation in Arizona, • Consistent, non-cyclical project pipeline, • Practical, construction-focused engineering environment, • Direct collaboration with builders and decision-makers, • Opportunity to grow into senior or lead engineering roles If you’re a licensed Civil Engineer looking for a stable, well-run company where your work directly impacts real projects, we’d like to talk.

Job Description Advanced Manufacturing Engineer – New Product Introduction (NPI) Location Phoenix, AZ or Goodyear, AZ (On-Site) Department New Product Introduction Employment Type Full-Time | Exempt Company Overview GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, data center infrastructure, defense, and industrial markets. GTI operates an engineered-to-order, fabrication-driven manufacturing environment where disciplined New Product Introduction and production launch execution are critical to scale, cost, quality, and delivery. Position Overview We design and manufacture complex modular systems supporting energy storage, power generation, data center infrastructure, defense, and industrial markets. Our products don’t move from concept to production by accident. They move because manufacturing engineers own the transition. We’re looking for an Advanced Manufacturing Engineer to lead product industrialization through disciplined NPI phase gates, from early design through production launch. This role sits at the center of engineering, manufacturing, supply chain, and quality, with real accountability for whether a product is ready to scale. Key Responsibilities NPI Phase Gate Ownership & Execution • Own manufacturing deliverables across all NPI phase gates from concept through production release, • Define manufacturing inputs required at each phase gate (design maturity, BOM completeness, routings, tooling, capacity, quality plans), • Participate as the manufacturing authority in phase gate reviews, • Ensure products do not advance gates without required manufacturing criteria being met, • Translate engineering designs into executable manufacturing strategies, • Define build approaches, line flow, takt assumptions, and labor models, • Develop and validate manufacturing routings, work instructions, and process documentation, • Ensure alignment between design intent, manufacturing capability, and cost targets, • Lead manufacturing execution for prototype and pilot builds, • Identify manufacturing issues during early builds and drive corrective actions, • Validate tooling, fixtures, equipment, and processes prior to scale, • Capture lessons learned and feed improvements back into design and process updates, • Partner with Design Engineering to influence product architecture and detail design, • Work with Supply Chain and Sourcing to validate supplier capability, lead times, and capacity, • Partner with Quality to define control plans, inspection strategies, and acceptance criteria, • Align with Operations on staffing models, training needs, and capacity planning, • Identify manufacturing risks tied to process complexity, tooling, labor, or supply chain, • Support cost modeling through labor, tooling, and process assumptions, • Drive mitigation plans for cost, capacity, and schedule risks, • Ensure all manufacturing documentation is complete and validated prior to production release, • Support formal handoff from NPI into Operations, • Train production teams on new processes, tooling, and requirements, • Remain engaged post-launch to support early production issues and ramp stability Required Qualifications • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or related discipline, • 7+ years of experience in manufacturing engineering within industrial or engineered product environments, • Direct experience supporting structured New Product Introduction programs, • Strong understanding of fabrication, assembly, and industrial manufacturing processes, • Experience participating in or owning NPI phase gate deliverables, • Ability to work cross-functionally and drive execution across teams, • Strong shop-floor problem solving and launch execution skills Preferred Qualifications • Experience in automotive, aerospace, energy, data center, or heavy industrial OEM environments, • Experience supporting high-mix, engineered-to-order products, • Familiarity with APQP, PPAP, or similar gated product development frameworks, • Lean or Six Sigma background, • Experience supporting pilot builds and production ramps GTI Energy is an equal opportunity employer and celebrates diversity in our workforce. Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job DescriptionDescription: The Springs Resort & Spa is seeking an experienced and strategic Director of Engineering to lead all maintenance, facilities, and engineering operations in Pagosa Springs, Colorado. This leadership role is essential to ensuring the safe, efficient, and reliable operation of all resort infrastructure following a significant expansion that introduced new building technologies and systems. The Director of Engineering will oversee preventative maintenance, life safety and fire protection systems, elevator operations, building automation systems (BMS), electronic access control systems (including Dormakaba Ambiance), and renovation projects across both newly developed and legacy areas of the resort. The ideal candidate is a strategic technical leader with experience in modern building systems, resort renovations, elevator troubleshooting and vendor management, and team development. This individual must possess a strong eye for detail, the ability to teach and mentor team members, and a proactive approach to maintaining operational excellence across all resort outlets. Essential Duties and ResponsibilitiesEngineering Leadership & Strategy • Provide overall leadership, direction, and accountability for the Engineering and Maintenance department, reporting to the General Manager and leading a team of engineering and maintenance professionals responsible for resort-wide infrastructure operations., • Accountable for system uptime, preventative maintenance completion rates, guest-impact work order response times, and life safety compliance metrics., • Lead energy management strategies, sustainability initiatives, and water conservation programs aligned with ownership objectives., • Serve as the primary engineering contact during critical incidents and coordinate emergency response related to infrastructure failure, life safety systems, or environmental hazards., • Develop, implement, and continuously improve preventative and predictive maintenance programs., • Establish departmental goals aligned with resort operations and ownership objectives., • Lead annual capital planning and long-term infrastructure strategy., • Support and provide technical oversight during renovation of the resort’s legacy facilities., • Ensure consistent operational readiness across guest rooms, spa facilities, food & beverage outlets, retail spaces, and back-of-house areas.Systems & Infrastructure Management, • Oversee maintenance and repair of HVAC, plumbing, electrical, and mechanical systems., • Direct management and optimization of the resort’s Building Management System (BMS), including system monitoring, scheduling, energy controls, and integration with mechanical and life safety systems., • Provide executive oversight of the Dormakaba Ambiance access control system, including credential management standards, system integrity, vendor coordination, and security protocol compliance., • Oversee life safety and fire protection systems, ensuring required testing, inspections, compliance, and coordination with authorities having jurisdiction (AHJ)., • Provide direct oversight of elevator systems, including troubleshooting, vendor coordination, preventative maintenance, and performance improvement., • Ensure proper maintenance of newly implemented technologies associated with the resort expansion., • Review blueprints, schematics, and technical documents related to renovations and system upgrades.Renovation & Project Management, • Partner with ownership, contractors, and project managers during renovation and improvement projects., • Ensure construction and renovation work meets safety standards, code compliance, and brand expectations., • Monitor project timelines, budgets, and contractor performance., • Provide hands-on expertise in carpentry, woodworking, and finish work when appropriate., • Maintain detailed documentation of repairs, improvements, and inspections.Financial & Administrative Oversight, • Develop and manage departmental operating and capital budgets., • Monitor labor, utilities, maintenance expenses, and project expenditures., • Identify energy efficiency and cost-control initiatives, including optimization of BMS and mechanical systems., • Oversee procurement of tools, materials, and facility supplies., • Negotiate and manage vendor contracts and service agreements, including life safety, access control, and elevator service providers.Safety, Compliance & Risk Management, • Ensure compliance with all applicable federal, state, and local laws and regulations, including OSHA standards, Colorado building and fire codes, public health regulations, and environmental and water safety standards., • Oversee and maintain all life safety and fire protection systems, including required testing, inspections, documentation, and coordination with authorities having jurisdiction (AHJ)., • Maintain emergency preparedness protocols and response procedures related to infrastructure, environmental, and safety incidents., • Conduct routine safety inspections and implement hazard prevention initiatives., • Minimum 7–10 years of progressive engineering or facilities leadership experience in hospitality, resort, or large commercial environments., • Demonstrated experience managing newly implemented building systems and property expansions., • Proven experience overseeing Building Management Systems (BMS) in a multi-building or resort environment., • Proven experience overseeing Building Management Systems (BMS) in a multi-building or resort environment., • Experience managing electronic access control platforms, preferably Dormakaba Ambiance or similar enterprise systems., • Experience overseeing life safety system compliance and related code requirements., • Experience overseeing elevator systems, vendor coordination, and preventative maintenance programs., • Proven experience supporting renovation or capital improvement projects., • Strong working knowledge of HVAC, plumbing, electrical, mechanical, life safety, and water systems., • Budget management and capital planning experience., • Ability to read and interpret blueprints, schematics, and technical manuals., • Strong leadership, communication, and organizational skills., • Prior Director of Engineering experience in a resort environment., • Trade certifications or technical degree in Engineering, Facilities Management, or related field., • Carpentry and woodworking experience strongly preferred., • Ability to stand, walk, climb ladders, access confined mechanical spaces, and inspect facilities for extended periods., • Ability to lift, push, or carry items up to 75 pounds., • Ability to work indoors and outdoors in varying weather conditions.

Job Description United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: The Associate Mechanical Engineer will work closely with design, construction, and commissioning teams to ensure the successful delivery of cleanroom projects that meet stringent specifications for air quality, temperature, humidity, and particulate control. The candidate must bring specialized knowledge in cleanroom standards, HVAC systems, and mechanical systems integration. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Perform requirements classification of clients, communicating project requirements and design review with internal & external design team for Mechanical System, such as, process exhaust duct, scrubber for waste air treatment, and dosing chemical., • Perform the required scope of work and clarify specification with stakeholders., • Assist procurement team on the procurement of Mechanical systems equipment & materials' and assist in contractors' awards., • Understand isometrics, P&ID and CAD drawings specifically for ME systems., • Review, approve and oversee the installation of ME systems., • Inspect work in progress to ensure that workmanship conforms with specifications and assure adherence to construction schedules., • Review progress reports, materials used and costs, contract payment application, and adjust work schedules as indicated by the reports., • Review & reply RFI (Request for information) and change orders., • Provide daily, weekly, and monthly reports for internal use and client communication., • Identify and solve problems., • Scheduling and schedule execution., • Understand drawing and review specifications and estimation. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: • Bachelor's degree in mechanical engineering, Construction Management, or a related field., • Strong understanding of process exhaust duct sizing & layout, mechanism of scrubber for waste air treatment., • Proficiency in Microsoft Office Suite products (Word, PowerPoint, Excel, Outlook, Teams)., • Ability to use engineering software, such as AutoCAD, Revit, Navisworks, Primavera, or others., • Excellent organizational and time management skills., • High level of attention to detail, and highly organized., • Ability to act with integrity, professionalism, and confidentiality., • Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees., • Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors., • Must be able to work under pressure and meet deadlines while maintaining a professional attitude., • Effective English verbal and written communication skills required., • Ability to communicate in Mandarin/Taiwanese is a plus., • Ability to effectively present information and respond to questions from groups of managers, customers, and employees., • Start-up experience., • Verbal communication skills in Mandarin. This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.

Job Description Project Engineer DBA Construction, Inc. is a successful heavy civil contractor with markets across Arizona who has a broad range of experience and expertise in heavy highway type construction, streets, concrete flatwork, concrete structures, earthwork, bridge, and wet utilities. Description: Project Engineers support the field Superintendent and Project Manager. They assist with the planning, management, and administration of the project(s) to which they are assigned. The variety of duties requires that the Project Engineer be organized, detail-oriented, and an effective communicator. Roles and Responsibilities are listed, but not limited to the following: • Reviews shop drawings, plans, specifications, material requirements and project data through the duration of the project to ensure quality and specification compliance., • Performs various tasks to evaluate daily production, schedule, and budget projections to accurately track project performance., • Meets with project management and Superintendent to review production schedule and confirm all materials, equipment and resources are readily available for production to continue schedule and within budget., • Provides technical input for project work plan and scheduling. Identifying risk elements of production, materials, equipment, or process that could negatively impact the budget or schedule., • Prepares and manages a three-week work plan. Notifies project management team of any significant schedule changes and develops solutions to mitigate delays and cost., • Initiates and manages all Requests for Information (RFIs), as needed by project., • Reviews quotes, subcontracts & Purchase Orders with project team for correct quantities & scope, • Coordinate subcontractors, services, and material delivery, • Write, manage and track RFI's., • Maintain control of all project documentation, • Ability to effectively communicate and to self-manage responsibilities., • Medical, • Dental, • Vision, • Accident/ Critical Illness, • Short Term / Long Term Disability, • 401k, • Holiday Pay, • Paid Time Off Job Posted by ApplicantPro

Job Description Regional specialized MEP Engineering firm is looking for a Project Manager for the mission critical services division to manage the electrical portion of projects from concept to completion. The ideal PM will have previous experience as an electrical design engineer on data center projects and excellent client interface skills to be the "point person" between the design and construction team. Responsibilities will include oversight of the project from schedule kickoff through completion, and while in progress will maintain project scope details including budgeting and personnel resources allocation to ensure the project is progressing on time and on budget. Requirements: • BS Degree, • Electrical Design Engineering Experience, • PE license, • Data Center/Mission Critical Systems experience Rewards: • Flexible Spending Account, • Multiple medical plans to choose from with low monthly premiums, • Optional, low-cost, medical and dental insurance, • 401K program with immediate vesting

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Senior Water/Wastewater Engineer / Senior Project ManagerLocation - Phoenix, AZJob Type – HybridRequisition ID - SENIO005948 Stanley Consultants is seeking a Senior Water/Wastewater Engineer / Senior Project Manager for our Phoenix, AZ office. Stanley Consultants is actively working in the Water/Wastewater Market in Arizona and needs additional leadership to maintain our current market presence while assisting our existing team to build Stanley’s water market presence. In doing so, this position will lead and deliver water, wastewater, and groundwater projects in the State of Arizona. This individual will be responsible for the development and management of all aspects of municipal water and wastewater utility system project planning, design, and services during construction.The Senior Water/Wastewater Engineer / Senior Project Manager will have an Arizona network of water/wastewater related connections and regional expertise in one or more of the following: • Water distribution, transmission, and storage, • Water treatment, • Wastewater conveyance and peak weather flow infrastructure, • Wastewater treatment, • Water Reuse, • Pump Stations, • Hydraulic modeling, • Asset management, • Risk and resiliency consulting and design, • Smart water system planning, design, and implementation, • Leading teams in the delivery of water/wastewater projects., • Participation in local professional organizations, preparing, and presenting market specific papers and presentations., • Work in collaboration with other disciplines (civil, mechanical, electrical, I&C, structural, and CAD) in producing plans and specifications., • Assisting in marketing business opportunities with key clients and development of responses to RFPs/RFQs., • Providing marketing and support during the procurement and execution of projects., • Developing and maintaining long-term relationships with clients., • Consistently managing and delivering projects on time and within budget., • Desire and ability to manage and mentor staff.Required Qualifications:, • Bachelor of Science (BS) degree in either Civil Engineering, or Environmental Engineering., • A minimum of 10 years of relevant experience., • Professional Engineer (PE) license in Arizona is required or ability to obtain within 6 months of hire date., • Arizona network of water/wastewater professionals/contacts., • Regional and technical expertise in water and wastewater engineering., • Active participation in professional organizations., • Strong verbal, computer, and organizational skills., • Excellent technical writing skills., • Strong client relationship skills., • Excellent design team leadership skills.Preferred Qualifications: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionTitle: Field Service Engineer Location: Phoenix, Arizona (must reside near Phoenix) Hire Type: Direct Hire Salary: $35–$45/hr (includes $6,000 car allowance) + 5% Bonus Benefits: Mileage reimbursement, PTO with blackout dates, OT at 1.5x, Company Credit Card (gas, food, parking), 401(k)Overview: Sterling Engineering is seeking multiple Field Service Engineers to join a rapidly growing power distribution company serving top-tier data center clients in the Phoenix area. This is a remote travel role—engineers must be located near Phoenix and will travel locally to client sites as needed. Military veterans are strongly encouraged to apply.Key Responsibilities: • Provide hands-on troubleshooting, repair, and maintenance of power distribution systems in data centers., • Serve as the primary on-site point of contact for customers, delivering exceptional service and professional communication., • Travel locally around Phoenix using a personal vehicle (mileage reimbursed); typical workload of 40–50 hours/week with occasional nights, weekends, and on-call duties., • Conduct system diagnostics, AC/DC power troubleshooting, and break/fix services on electrical panels and associated power systems., • Collaborate with internal engineering and customer support teams to resolve field issues efficiently., • Maintain accurate service records, customer communication logs, and travel documentation using company systems.Qualifications:, • 3–5 years of hands-on experience with electrical systems, preferably in high-voltage or AC/DC power distribution., • Strong knowledge of electrical troubleshooting principles; experience in data centers or mission-critical environments is a plus., • Comfortable in a customer-facing role with excellent interpersonal and communication skills., • Must reside near Phoenix and be able to travel locally using a personal vehicle; $6,000 annual car allowance included., • Military veterans are highly preferred., • Flexible and dependable, able to work overtime and respond to emergency call-ins as needed.Why Join Us:, • Competitive hourly rate with performance bonus., • Comprehensive benefits package including mileage reimbursement, PTO, and 401(k)., • Work with cutting-edge power distribution systems in mission-critical environments., • Join a rapidly expanding team with opportunities for growth and career development.

Job Description Pre-Opening & Development Phase • Serve as the executive engineering leader during pre-opening, working alongside Development, Construction, Design, and Project Management teams, • Provide oversight and input on building systems, infrastructure, commissioning, testing, and turnover readiness, • Lead operational readiness planning, including asset lifecycle planning, maintenance strategies, staffing models, and SOP development, • Partner on large-scale system installations, technology integration, and handoff from construction to operations, • Establish preventive maintenance programs for the entire resort including guestrooms, public areas, venues, attractions, etc., vendor partnerships, and service contracts ahead of opening, • Oversee the seamless transition from construction to full resort operations, ensuring systems perform safely, reliably, and at world-class standards, • Build, lead, and inspire a facilities organization of 100+ team members across multiple disciplines and venues, • Drive operational excellence across all resort facilities, including hotels, entertainment venues, attractions, public spaces, and back-of-house infrastructure, • Develop and manage operating and capital budgets, including forecasting, cost controls, and long-term reinvestment planning, • Implement standards, policies, and performance metrics to support efficiency, safety, and guest experience, • Ensure full compliance with all local, state, and federal regulations, certifications, inspections, and safety requirements, • Lead emergency preparedness, response planning, and incident management protocols, • Partner closely with Operations, Entertainment, IT, Safety, Finance, and HR to support a complex, 24/7 resort environment, • 10+ years of senior leadership experience in facilities and engineering, ideally within large-scale resorts, hotels, entertainment destinations, theme parks, or mixed-use developments, • Proven success leading organizations of significant scale (100+ team members preferred), • Strong experience in pre-opening, development, commissioning, or major capital projects, • Deep technical knowledge of commercial/light industrial building systems including HVAC with multiple chillers and chiller plants (60 to 5500 tons each), electrical with owner provided sub-station, plumbing, life safety, controls, and infrastructure., • Demonstrated ability to build multiple teams, processes, and culture from the ground up, • Strong financial acumen with experience managing large operating and capital budgets, • Bachelor’s degree in engineering, Facilities Management, or a related field strongly preferred, • Hold advanced degree or professional certifications (PE, CFM, LEED, or similar), • Ability to navigate a large, active resort and construction environment, including mechanical spaces and rooftops, • Ability to sit, stand, and walk for extended periods, • Ability to occasionally lift up to 25 pounds, • Medical, dental, and vision coverage, • Company-paid life insurance and AD&D, with optional supplemental plans (group life, critical illness, short-term and long-term disability, and more), • Generous paid time off, including vacation, sick time, and nine (9) paid holidays per year, • Career growth and professional development opportunities, • 401(k) retirement plan with Company match *Note: This job description is intended to convey information essential to understanding the scope of the position and is not an exhaustive list of skills, efforts, duties, responsibilities, or working conditions associated with it. Duties and responsibilities may be subject to change.