Trabajos mechanical engineering en Santa Ana, CaliforniaCrear alertas

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist Software Engineer Job Code: 35496 Job Location: Anaheim Ca Schedule: 9/80 Summary: Under general direction of the Management of Software Engineering, this position develops and applies advanced software engineering methods in the investigation and solution of complex and advanced technical problems power system architectures and power conversion equipment. The Specialist Software Engineer shall lead a small software engineer team to support for all stages of product development from design through implementation and system integration under minimal supervision. Essential Duties: • Development and integration of software projects for existing and new products., • Interpret customer specifications to define requirements for software design., • Provide software technical leadership for the software developer team members., • Perform requirement analysis and software coverage analysis for software code base., • Compose software use case and review test procedures for validation and verification of software development., • Capture and document existing software products to meet qualification standards at highly regulated and safety critical government contracts., • Ability to work simultaneously on a variety of projects., • Reviews project progress and help with earned value reporting. Recommend corrections in technical approach to maximize efficiency of engineering resources., • Responsible to lead and operate Agile sprint/Kanban team, sprint planning, Jira ticket-based workflow management, and tracking toward team deliverable objectives., • Proactively seek performance improvement/enhancement for the SW team with DevSecOp assisted automation and streamlining., • Support activity effort estimation in development of software bid and proposals., • Support new programs from conceptual design, through detail design to completion., • Provides expert guidance with a variety of software engineering concepts, practices, and procedures, • Coordinate directions from Project and/or System Engineering Department Manager. Qualifications: • Bachelor of Science degree in Computer Engineering, Computer Science, Electrical Engineering, or equivalent from a four-year college or university; and minimum 6 years of experience in design and analysis of systems software for power conversion equipment., • Or a Master of Science or advanced degree preferred and a minimum of 4 years of prior related experience., • Or in lieu of a degree, minimum of 10 years of prior related experience., • Ability to obtain and maintain a secret/security clearance., • Expertise in embedded real-time systems software design., • Experienced in object and service-based software architectures, a plus., • Experienced in embedded C and C++ programming., • Expertise with communication protocols, such as RS-232, RS-485, and Ethernet., • Experience in development and releasing software products meeting highly regulated and safety critical standards, medical or military grade software product, preferred., • Design familiarity with control systems and power conversion concepts is highly preferred., • Knowledge of power electronics and analog circuits, a plus., • Must be able to work as a key member of the design team with Power Design Engineers, Digital and Analog Engineers, System Engineers, Control System Engineers and Mechanical Engineers #LI-BR2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

“We create happiness.” That’s our motto at Disney Experiences. At Disney, you’ll help inspire magic by enabling our teams to push the limits of entertainment and create innovative built environments. You will collaborate to develop ideas/thoughts into physical reality! The Architecture & Facilities Engineering (A&FE) team is looking for a Staff Mechanical Engineer to support the development and sustainment of projects we support throughout the Disneyland Resort. Our department supports a wide range of project types including Attractions, Maintenance, Foods, Merchandise, and Entertainment. Projects range from minor renovations to new facilities. You will also support immediate response efforts with reactionary projects. You will act as the Staff Mechanical Engineering Owner’s Representative with technical expertise for mechanical engineering issues, design management of in-house and outside resources, code compliance, Disney design standards, documentation, specifications, and life cycle cost analysis for best value. This role also involves close collaboration with other engineering disciplines and multiple Disney project teams including FAM, WDI, Entertainment, and Operations. You will report to the Senior Manager for MEP Engineering with DLR Architecture & Facilities Engineering. What You Will Do * Act as Owner’s Representative on projects from concept through construction at the Disneyland Resort. Project types will include shops, rides, hotels, shows, maintenance facilities, and nearly any built facility and area development found on our property. * Manage the design and development of contract documents of projects with in-house and outside resources to meet project scopes, schedules and budgets. * Develop concepts and Request for Proposals (RFP)s. * Attend, participate, and problem solve during site visits from concept through construction. * Review drawings and specifications and ensure that all projects are designed and executed to applicable codes and statutes * Work with stakeholders to provide civil engineering resources to develop project scope including design, planning and code compliance for estimation and feasibility. * Resolve design issues creatively and thoroughly coordinating design with other disciplines. * Develop clear technical analyses and recommend frameworks to inform executive review and approval. * Partner with internal teams to develop, maintain, communicate, and enforce Walt Disney Company design guidelines, standards, master specifications, and details. * As the owner's representative, you'll review with a focus on constructability, efficiency, and long-term maintainability. * Liaison with City officials and external agencies to ensure project scope and implementation is coordinated and compliant with external requirements. * Research Record Drawings in Disneyland Archives. * Perform field work to investigate and assess mechanical related infrastructure in the Resort. * Independently review new and existing design drawings and calculations. * Review shop drawing submittals and respond to vendor requests for information per Resort standards. * Coordinate design activities and monitor field installations and demolition work that comply with specifications and code requirements. * Perform reviews of existing infrastructure: propose upgrades and replacements, present findings and recommendations. * Serve as Engineer of Record on assigned projects, including signing and sealing construction documents when required. * Design with focus on constructability, efficiency, and long-term maintainability. * Expedite the receipt of sample submittals required for final design approval. * Participate in weekly design coordination meetings and prioritize items to minimize schedule impacts. * Assist Project and Design Managers to resolve design compliance issues relating to Projects requirements. Validate that all Item Specifications are consistent with products installed before archiving manuals. * Support Executive Design Reviews by contributing technical content, analysis, and coordination as requested by Project or Design Management. What We Look For * 10+ years of experience in mechanical engineering design, HVAC/DX/VRF/CHW applications, central plant development and operational guidance, hydraulics, hydronics, compressed air, overall kitchen designs and implementation. * Ability to support project partners in procurement and construction. * Experience with AutoCAD, Revit, ACC, and other engineering-based software. * Working knowledge of both National and Local Standards and Codes. Required Education and Licensure * BS Mechanical Engineering or related field from an ABET accredited university. * Current registration as a Professional Engineer in the State of California in good standing. #DXMedia #DXFOS #LI-YW1 Additional Information Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at ___. The hiring range for this position in Anaheim, CA is $126,800.00 to $154,800.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate’s geographical region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Software Engineering Job Code: 34734 Job Location: Anaheim, CA Schedule: 9/80 JOB DESCRIPTION: L3Harris Maritime Power & Energy Solutions (MPES) has an opening in the software engineering organization within its Maritime Systems sector site located in Anaheim, CA. Under general direction of the Management of Software Engineering, this position develops and applies advanced software engineering methods in the investigation and solution of complex and advanced technical problems power system architectures and power conversion equipment. The Senior Software Engineer shall lead software engineer team to support for all stages of product development from design through implementation and system integration under minimal supervision. ESSENTIAL DUTIES • Interpret customer specification to define requirements for software design., • Capture and document existing software product to meet qualification standards at highly regulated and safety critical government contracts., • Provide software technical leadership for the software developer team members., • Reviews project progress and helps in earned value reporting. Recommends corrections in technical approach to maximize efficiency of engineering resources., • Proactively seek performance improvement/enhancement for the SW team with DevSecOp assisted automation and streamlining., • Support new programs from conceptual design, through detail design to completion., • Bachelor of Science degree in Computer Engineering, Computer Science, Electrical Engineering, or equivalent from a four-year college or university; and minimum 6 years of experience in design and analysis of systems software for power conversion equipment. Master of Science or advanced degree preferred and a minimum of 4 years of prior related experience. Or in lieu of a degree, minimum of 10 years of prior related experience., • Ability to obtain and maintain a secret/security clearance., • Expertise in embedded real-time systems software design., • Experienced in object and service-based software architectures, a plus., • Experienced in embedded C and C++ programming., • Expertise with communication protocols, such as RS-232, RS-485, and Ethernet., • Experience in development and releasing software products meeting highly regulated and safety critical standards, medical or military grade software product, preferred., • Design familiarity with control systems and power conversion concepts is highly preferred., • Knowledge of power electronics and analog circuits, a plus., • Must be able to work as a key member of the design team with Power Design Engineers, Digital and Analog Engineers, System Engineers, Control System Engineers and Mechanical Engineers, • Knowledge of Python or C-Sharp is beneficial. In compliance with pay transparency requirements, the salary range for this role for California is $122,500- 177,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-RTC1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

___ is seeking skilled Automotive Service Technicians to join our growing service teams at Volvo Cars Mission Viejo, Audi Mission Viejo, and Polestar South Coast. This is an excellent opportunity for technicians who want to build their careers working with luxury European vehicles and next-generation EV technology. Technicians with experience from any automotive brand are encouraged to apply. Experience with European or luxury vehicles is highly valued, and technicians interested in gaining experience with electric vehicles and advanced automotive technology will find exciting opportunities within our organization. We are known for investing in our people, providing modern facilities, advanced diagnostic tools, and a supportive leadership team committed to technician success. Our dealerships represent globally respected brands known for engineering excellence, innovation, and cutting-edge vehicle technology, giving technicians the opportunity to grow their skills while working with some of the most advanced vehicles on the road today. If you are a motivated technician looking for a dealership group that values your expertise and provides long-term career opportunities, we encourage you to apply. We Offer: • Pay starting at $75,000 - $300,000 annual income potential, • Paid training and certification programs, • Medical, Dental, and Vision insurance, • Disability and Life insurance, • Flexible Spending Accounts (FSA), • 401(k) Retirement Plan, • Paid Time Off + Holiday Pay (after waiting period), • Employee discounts on vehicles, parts, and service, • Steady workflow with strong customer demand, • Supportive, team-oriented culture focused on long-term employee success, • A clean, well-equipped, state-of-the-art service facility Responsibilities – Automotive Service Technician: • Perform diagnostics, maintenance, and repairs according to manufacturer standards, • Inspect vehicles and identify mechanical, electrical, and drivability concerns, • Perform routine maintenance services including brakes, suspension, and fluid services, • Utilize manufacturer diagnostic equipment and service tools, • Document findings and communicate repair recommendations clearly, • Maintain productivity and quality standards, • Participate in manufacturer and dealership training programs, • Follow all safety procedures and service department guidelines Requirements/Qualifications – Automotive Service Technician: • At least 2 years of Automotive Technician experience required, • Strong diagnostic and problem-solving skills, • Ability to work efficiently in a team-oriented environment, • Commitment to quality workmanship and customer satisfaction, • Valid driver’s license and good driving record, • ASE Certifications preferred, • EV/Hybrid experience and certifications are a HUGE plus, • Must be authorized to work in the U.S. without sponsorship and be a current resident, • Must pass pre-employment testing to include MVR and drug screening About Unstoppable Automotive Group Unstoppable Automotive Group represents some of the most respected luxury and performance automotive brands, including Mercedes-Benz, Volvo, Audi, Jaguar Land Rover, and Polestar. The organization focuses on delivering exceptional customer service while creating a workplace where employees can build long-term careers and continue developing their technical skills. With a strong commitment to innovation, modern facilities, and ongoing training, Unstoppable Automotive Group provides technicians the opportunity to work with premium vehicles and advanced automotive technologies, including the rapidly expanding electric vehicle segment. We are an Equal Opportunity Employer. All qualified applicants are considered regardless of ethnicity, nationality, gender, veteran or disability status, religion, age, gender orientation, or other protected status.

Job DescriptionSalary: 18-25 Job Title: Press Brake Operator Job Description: As a Press Brake Operator, you will play a critical role in our production process, ensuring the precise bending and forming of metal components. If you have a keen eye for detail, can interpret technical drawings, and are committed to producing high-quality parts, we encourage you to apply. This is afull-time onsite role, Monday through Friday, from6:00 AM to 2:30 PM. Key Responsibilities: • Set up and operate Bystronic press brake machines to bend and form sheet metal components according to engineering drawings and specifications., • Select and install the appropriate tooling and dies based on job requirements., • Make necessary machine adjustments to ensure accurate and consistent bending angles and dimensions., • Monitor the production process, inspect parts for quality, and make real-time adjustments., • Perform routine maintenance on the press brake machines to ensure they operate smoothly and efficiently., • Collaborate with team members, including engineers and quality control personnel, to resolve production issues and meet project deadlines., • Maintain a safe and clean work environment, following all safety protocols and guidelines., • Proven experience as a Press Brake Operator, with a preference for Bystronic press brake machines., • Knowledge of Bysoft 7 Software is a plus., • Proficiency in interpreting engineering drawings and blueprints., • Strong mathematical skills and the ability to accurately measure and inspect parts., • Mechanical aptitude and problem-solving skills., • Attention to detail and a commitment to producing high-quality work., • Excellent communication and teamwork skills., • Ability to work in a fast-paced manufacturing environment and meet production deadlines., • Physical stamina and the ability to stand, lift, and bend for extended periods., • Prior knowledge of safety regulations and a commitment to workplace safety. Applicants must be authorized to work in the U.S. and have proofto be considered for this position. If you are a skilled Press Brake Operator with experience in operating Bystronic press brakes, we encourage you to apply for this position. Join our team and contribute to the production of high-quality metal components in a dynamic and innovative manufacturing environment.

Job DescriptionCNC Manufacturing Engineer CNC Manufacturing Engineer Position Overview We are seeking an experienced CNC Manufacturing Engineer to develop, optimize, and sustain high-precision CNC manufacturing processes for complex parts. The role is responsible for CNC programming, tooling and fixture design, machine setup and calibration, process validation, and continuous improvement to meet quality, cost, and delivery objectives for production and prototype work in a job-shop and/or production environment. Key Responsibilities • Develop and optimize CNC programs (G-Code) using CAM and post-processing tools to produce efficient, collision-free toolpaths for 3-axis through 5-axis machining., • Create and maintain CAM/CAD files and models using MasterCAM, SolidWorks, AutoCAD, Siemens NX, Catia, CAMWorks, GibbsCAM, Edgecam or equivalent software., • Perform CNC simulation and verification (Vericut or similar), validate post-processors, and refine post-processing for Fanuc, Haas, Siemens Controls, Heidenhain and other controllers., • Design tooling, fixtures, and workholding solutions to ensure repeatable, accurate setups and tight tolerance machining., • Select cutting tools, optimize feeds and speeds, and implement toolpath optimization and tool management best practices to reduce cycle times and extend tool life., • Set up and calibrate CNC milling machines, turning centers, multi-axis machines, Swiss turning and lathes; perform first part setups and machine verification., • Support and perform precision metrology and first article inspections using CMM, micrometers, calipers, bore gauges and related inspection tools; interpret and apply GD&T requirements., • Troubleshoot CNC machine issues, perform preventive maintenance, and coordinate repairs or rebuilds with maintenance and machine vendors., • Lead process validation activities including First Article Inspection, SPC, Statistical Process Control, root cause analysis, and corrective actions (FMEA when required)., • Drive continuous improvement, lean initiatives, Kaizen events and Six Sigma projects to reduce cycle time and improve yield, cost and quality., • Ensure manufacturing documentation is maintained: process plans, setup sheets, work instructions, and inspection plans; support ISO 9001 and AS9100 compliance requirements., • Work cross-functionally with production planning, procurement and engineering to support material selection, production scheduling, ERP/MRP systems (SAP/Oracle) and job-shop operations., • Integrate automation where appropriate: robotics, PLC programming and cell integration; support EDM, Wire EDM and surface grinding processes as needed., • Train machine operators and junior programmers on CNC best practices, safe setup and advanced machining techniques.Qualifications, • Bachelors degree in Mechanical, Manufacturing, or Industrial Engineering or equivalent technical degree or experience., • 5+ years of hands-on experience in CNC programming, process development, and production support in a precision machining environment (job shop or production)., • Demonstrated proficiency with CAM and CAD tools such as MasterCAM, SolidWorks, Siemens NX, CAMWorks, GibbsCAM, Catia, Edgecam, AutoCAD and Vericut., • Strong knowledge of G-Code, post-processing, CNC simulation, and controllers including Fanuc, Haas, Siemens and Heidenhain., • Extensive experience with 3-axis, 4-axis and 5-axis machining, CNC milling, turning, Swiss turning and multi-axis machining centers and lathes., • Proven skills in tooling design, fixture design, workholding, cutting tool selection, feeds and speeds and tool management., • Experience with metrology and quality systems: GD&T, CMM programming/operation, micrometers, calipers, bore gauges, FAI and SPC., • Practical experience with root cause analysis, FMEA, Lean Manufacturing, Six Sigma, Kaizen and continuous improvement methodologies., • Familiarity with materials and metallurgy relevant to machining (aluminum, steels, titanium, high-performance alloys) and machining strategies for tight tolerance parts., • Experience with ERP/MRP systems (SAP or Oracle preferred), production planning and job-shop operations., • Strong problem-solving skills, attention to detail, and excellent written and verbal communication skills to collaborate across functions., • Competitive pay $85,000-$120K Salary DOE, • Medical, • Dental, • Vision, • 401K, • PTO, • Sick time • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 04/03/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.Everforth CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. Everforth CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. Everforth CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

JOB SUMMARY Accurately and efficiently test a variety of moderate to complex fan and pump assemblies to achieve customer quality and on-time delivery schedule. Test products that contain mechanical or electrical driven test systems, hydraulic systems, and multiple part families. Will be responsible for evaluation, repair, qualification of test stands, and occasional training and integration in support of manufacturing activity. ESSENTIAL DUTIES & RESPONSIBILITIES • Performs moderate to complex test functions utilizing mechanical skills, hand and power tools, mechanical/electronic tools, test equipment, and test fixtures., • Sets up moderate to complex test equipment on a variety of products to measure and record valve or system conformance to test specifications., • Sets up test stands with appropriate plumbing for hydraulic, pneumatic, fuel, and nitrogen tests from required product ATP specifications., • Be familiar and able to work with 120 to 480 Volt, 3 phase, 400Hz electrical test set ups., • Verifies accuracy of test stand and setup prior to testing and makes necessary adjustments to attain specified test results., • Conducts tests using common and/or computerized data acquisition equipment and interprets/records test results on data forms. Uses X‐Y recorders, oscilloscopes, transducers, flowmeter, vibe machines, vibe tables and ESS chambers., • Troubleshoots and rework malfunctions disclosed by test data., • Build experimental devices from engineering sketches or specifications, testing and troubleshooting of such devices or systems, and development of design details., • Observes all safety rules and maintains a foreign object damage (FOD) free work area., • Make simple modifications to test fixtures or prototype parts with shop machinery., • Ensures all equipment is calibrated in accordance with calibration schedule. EDUCATION AND EXPERIENCE • High school diploma or general education degree (GED)., • 5 years related experience and/or training., • Requires over three years minimum exposure to manufacturing environment., • Requires knowledge of engineering principles., • Air conditioning experience desired., • Machine shop knowledge a plus. QUALIFICATIONS: • Must be a US Citizen

Senior Test/NPI Engineer Irvine, CA Onsite Contract The ideal candidate will be responsible for designing, developing, implementing, and supporting test solutions for manufacturing and operational processes. This includes automated test systems, diagnostics, calibration and verification tools to ensure the quality and reliability of products during production. Responsibilities: • Design and develop production test systems (hardware and software) for product verification and validation., • Collaborate with design, quality, manufacturing and vendors to define test requirements and ensure test coverage., • Implement automated test solutions to improve efficiency, accuracy, and scalability in production environments., • Develop and maintain test fixtures, scripts, and infrastructure., • Provide technical support to manufacturing and operations teams to resolve test-related issues., • Maintain and calibrate test equipment, ensuring compliance with industry standards and internal policies., • Document all test procedures, specifications, and results in line with quality management systems., • Perform Gauge R & R and IQ/OQ/PQ for custom test fixtures., • Develop and perform design of experiments. Required Skills & Abilities: • Strong problem-solving skills and attention to detail., • Proficient in test method analysis and test method validation, • Good documentation skills with strong communication and teamwork abilities., • Demonstrated ability to work on problems of a complex scope where analysis of situations or data involves multiple competing factors., • Solid understanding of verification and testing best practices Education & Experience: • Bachelor’s degree in mechanical engineering, biomedical engineering, or a related field., • 5+ years of experience in test development or test engineering, preferably in a production or operations setting, • Working knowledge in test software environments such as LabVIEW and/or Python preferred, • Experience in executing verification/testing software in a design and production environment, • Experience within a highly regulated medical device industry., • Hands-on experience with electronic measurement instruments (e.g., oscilloscopes, multimeters, power supplies).

Here, we craft excellence together. Your mission? Making the journey the most enjoyable part of the trip. Join our first-class team to reinvent in-flight experience. In the role of Planning Supervisor, you'll play a pivotal part on our production team. The Aftermarket Planning Supervisor will lead and manage a team of spares planners within the aftermarket division of a global aerospace manufacturing company. This role is dedicated to ensuring operational excellence in aftermarket planning, scheduling, and inventory management. With a strong focus on aerospace spares support, the Supervisor will oversee queue management, KPI performance, and daily planning execution to meet customer requirements. The position plays a key role in ensuring the accuracy of data in the business system, which directly impacts company-wide financial reporting and aftermarket customer satisfaction. • Lead, mentor, and supervise a team of spares planners in the aerospace aftermarket division, ensuring high performance, accountability, and alignment with organizational goals., • Implement and maintain world-class strategies for aftermarket planning, scheduling, inventory, and customer satisfaction, while driving continuous improvement across all functions., • Oversee all aftermarket planning activities, including workload balance, prioritization, and queue management for PPO, initial commitment dates and recovery dates, ensuring accuracy, timeliness, and ownership of all lines., • Drive daily execution of key aftermarket KPIs including PPO release adherence, initial commitment dates and recovery date creation, and PMO release compliance. Monitor individual performance, flex resources to balance changing workloads, and lead cross-functional efforts to resolve the highest aging lines., • Act as the first line of escalation for planning and operational issues, providing rapid problem-solving support to both the team and internal stakeholders., • Maintain and update weekly KPI charts for Tuesday management reports, providing analysis and insights while the Manager presents. Transition ownership of additional metrics (supply cancellations, pull-ins, pushouts, NCR, etc.) from Manager to Supervisor over time., • Develop and monitor aftermarket production plans, budgets, and schedules in line with aerospace requirements and plant capacity. Proactively identify risks or delays and implement corrective actions to protect customer commitments. But what else? (advantages, specificities, etc.) • Ensure planners execute essential functions including BOM analysis, material planning, timely requisition delivery to purchasing, work order release and management, revision control, ERP data accuracy, and on-time fulfillment of aftermarket customer requirements., • Oversee inventory levels to meet company and aftermarket customer goals, ensuring alignment with financial targets and operational needs., • Foster premier customer service for airlines, MROs, and other aerospace aftermarket clients by ensuring planning execution supports client expectations., • Conduct risk assessment and mitigation activities specific to aftermarket supply chain challenges., • Provide leadership through training, mentoring, and talent development, driving a culture of accountability, collaboration, and professional growth within the spares planning team., • Execute strong working knowledge of MRP/ERP systems and other applicable planning tools, leveraging aerospace expertise to optimize performance., • Collaborate with supply chain, operations, engineering, and quality teams to ensure aftermarket planning alignment with aerospace manufacturing standards and long-term business objectives., • Other duties as assigned by the management team. Candidate skills & requirements Education: BS/BA degree required from an accredited university Experience: Minimum of 7+ years of progressive planning, scheduling and inventory management experience in aerospace, automotive or mechanical manufacturing environment with the ability to lead and influence others, with 2+ years of the 7 years in a planning leadership position Computer Skills: • Experience working with MRP/ERP systems, • Proficiency with MS Office Skills (Excel, Word, PowerPoint, Outlook) Other Skills: • Broad knowledge of the field with proven management skills., • Effective oral and written communications skills, • Demonstrated ability to handle multiple projects and assignments with attention to detail, • Problem solving, well organized, detailed oriented and accurate., • Strong written and verbal business communications abilities must be comfortable delivering information to all levels of the organization including senior leadership., • Working knowledge of business finance skills and abilities. Additional Preferred Skills: (not required) • BS/BA in supply chain, business management, or operations from an accredited university, • APICS CPIM and/or ISM certifications, • Experience in AS/ISO standards quality management experience., • Problem-solving skills (Six Sigma Green Belt, etc.), • Aftermarket or Spares Business experience Description: Entry-level management position within field.

Manufacturing Quality Engineer Fullerton, CA $100K - $120K Job Summary As a key member of the product team, this individual will be the primary quality focal for one or more product lines and various quality functions. The successful candidates should be thoroughly experienced in interpreting customer drawings, specifications, and internal quality requirements as well as assuring systems for such are compliant. Primary Responsibilities • Coordinate with Manufacturing Engineer to process customer returned materials and nonconforming parts., • Initiate root cause and develop 8D corrective action plans as needed., • Lead problem solving for internal rejections and customer returns., • Establish and execute training., • Develop quality plans with Product Group Manager during proposal phase., • Perform as a member of the Change Review Board to assure acceptability of changes to primary documents., • Review manufacturing planning for incorporation of inspection point, ATP test point, and determine special gauging requirements and compliance to drawings., • Develop inspection planning for receiving, in process, assembly, final and test inspection., • Participate in or facilitate customer or AS 9100 audits., • Perform trend analysis on product issues and corrective actions., • Conduct internal audits of Quality system, issue CARs, and implement improvement action plan., • Review supplier purchase orders, ratings, supplier performance and issue supplier corrective actions as needed., • Acts as Quality Department Representative on Material Review Board (MRB). Qualifications • BS degree in technical or engineering discipline., • Minimum five (5) years’ experience in the Quality Assurance/Quality Control field., • Exposure to mechanical and/or electrical inspection techniques and thorough understanding of Quality systems such as AS9100D /ISO: 9001:2015., • Experience in problem solving 5 Why, FMEA, Control Plan, 8D, and Fishbone Analysis., • Strong analytical and communication skills; both written and verbal., • Fluent with quality concepts and systems., • ASQ Certifications (CQE, CSSBB etc.) preferred.

Company Description AC Future is pioneering innovative and sustainable solutions to address today’s housing challenges. Specializing in smart, flexible, and eco-conscious homes, we are committed to redefining modern living while prioritizing environmental responsibility. Our mission is to empower individuals to embrace a sustainable lifestyle without compromising on quality or comfort. Join us in shaping a more sustainable future for communities worldwide. Role Description We are seeking an experienced and hands-on Director of Manufacturing to lead and support manufacturing strategy, process development, supplier integration, and production readiness activities for our RV and mobility products. This role will play a critical part in establishing scalable manufacturing operations, supporting supplier and partner readiness, and driving efficient production execution from prototype through mass production. The Director of Manufacturing will work cross-functionally with Program Management, Engineering, Supply Chain, Quality, and Operations teams to develop manufacturing processes, support partner selection, and ensure production execution is aligned with company objectives. This role owns production readiness and industrialization of externally developed components, including defining assembly processes, work instructions, tooling requirements, and quality standards for scalable U.S. assembly. This position reports directly to the VP of Program Management and Operations. Key Responsibilities Manufacturing Strategy & Process Development • Develop and implement overall manufacturing strategy for current and future products., • Support manufacturing process design, production flow, line balancing, and assembly optimization., • Lead development of scalable manufacturing systems for prototype, pilot, and mass production phases., • Support advanced manufacturing initiatives including 3D printing and rapid prototyping processes., • Define manufacturing requirements, tooling strategy, and process validation plans., • Drive cost-down initiatives of labor efficiency, supplier cost, and assembly time Supplier & Manufacturing Partner Management • Identify, evaluate, and onboard manufacturing partners and suppliers., • Support sourcing and manufacturing RFQ activities with domestic and international partners., • Visit supplier and manufacturing partner facilities to assess manufacturing readiness, quality systems, capacity, and execution status., • Ensure manufacturing partners remain on track with project timing, quality, cost, and delivery expectations., • Collaborate with external partners to resolve manufacturing and process issues. Manufacturing Facility Development • Support planning and launch activities for future manufacturing facilities, if required., • Assist with facility layout planning, equipment selection, workflow optimization, and operational readiness., • Support establishment of manufacturing standards, procedures, and operational KPIs. Cross-Functional Leadership • Work closely with Engineering, Product Management, Supply Chain, Quality, and Operations teams to ensure manufacturability and production readiness., • Support prototype builds, pilot builds, and production ramp-up activities., • Drive continuous improvement initiatives focused on safety, quality, cost, and productivity., • Provide regular manufacturing readiness updates to executive leadership. Qualifications • Bachelor’s degree in Engineering, Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related technical field., • Minimum 5 years of manufacturing experience within the automotive, RV, or related industry., • Experience taking externally developed or early-stage product designs and converting them into repeatable, production-ready assembly processes., • Strong background in manufacturing process development, production systems, and manufacturing strategy., • Experience working with contract manufacturers and external production partners., • Experience supporting prototype and production launch activities., • Knowledge of manufacturing methods including assembly processes, fabrication, tooling, and rapid prototyping/3D printing., • Strong project management and cross-functional leadership skills., • Ability to travel domestically and internationally as required. Preferred Qualifications • Experience supporting new manufacturing facility setup or production line launch., • Experience with low-volume to high-volume production ramp-up., • Familiarity with lean manufacturing and continuous improvement methodologies., • Experience in EV, mobility, trailer, or recreational vehicle manufacturing environments. Company Benefits: • Generous employee stock options, • 401(k) – 1:1 company match up to 5%, • Vision, Dental, and Medical Insurance, • PTO and paid holidays, • Free office lunch, • Sponsorship for employment visa status Job Type: Full-time Location: Irvine near Spectrum, CA

Overall Purpose: The Design Engineer will independently evaluate, select and apply standard engineering techniques and procedures to design mechanical/fluid components and assemblies that meet the requested objectives and requirements. Essential Duties & Responsibilities: • Provide design and engineering support for a wide variety of new and existing products with a focus on aerospace hoses, couplings and quick disconnects, • Develop, evaluate, and implement new processes, techniques, materials, finishes etc., • Support manufacturing with new and innovative methods of producing parts and assemblies, lower costs and increase manufacturability and functionality, • Be an integral part of the engineering team and will receive instructions, training, and pre-established guidelines to perform the functions of the job in a timely manner, • Adhere to 5S Standards, • Other duties based on the needs of the Engineering Department The preceding functions have been provided as examples of the type of work performed by employees assigned to this job classification. Management reserves the right to add, modify, change or rescind work assignments and to make reasonable accommodations as needed. Qualification Requirements: • Bachelor of Science Degree in Mechanical or Aerospace Engineering from an accredited college or university, • 5+ years of experience in the engineering field, preferably focused on aerospace components, • Knowledge of CAD software (SolidWorks, AutoCAD or Catia, FEA a plus), • Background in Aerospace Components preferred, • Ability to find creative and cost-effective design solutions to complex mechanical engineering problems, • Good mechanical aptitude and knowledge, • Self-motivated and highly organized, • Possess knowledge of commonly used engineering concepts, practices and procedures, • Strong computer skills – especially Microsoft Word and Excel, • Able to work with a fast paced, multi-disciplinary team, • Able to follow instructions with little supervision, • Fluent in English (able to read, speak, write and understand), • Must be a U.S. Person (U.S. Citizen or Permanent Resident) Physical Demands: • While performing duties of the job, the employee is regularly required to:, • Sit, • Use hands and fingers to handle, type or feel, • Reach with hands and arms, • Speak or hear, • While performing duties of the job, the employee is occasionally required to:, • Stand, • Walk Work Environment: Mainly office environment with occasional time spent in a warehouse setting • Must be a U.S. Person based on ITAR definition (U.S. Citizen or Permanent Resident). This position is expected to be exposed to information which is subject to U.S. export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All Applicants must be U.S. persons within the meaning of U.S. regulations. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Title: Manufacturing Quality Engineer Location: Placentia, CA | Onsite Employment Type: Temp-to-Hire Schedule: Monday–Friday | 7:00 AM – 4:00 PM (Must be available to work overtime as needed) Compensation: $70,000 – $75,000 annually Job Summary: The Manufacturing Quality Engineer supports quality operations by coordinating customer returns, validating return reasons, and supporting corrective action activities related to returned products. This role is responsible for reviewing and approving product routings, quality plans, and inspection plans to help ensure manufacturing and quality requirements are met. The position also coordinates AS9102 first article inspection activities, including determining FAI requirements, preparing inspection documentation, and reviewing FAIR submissions to support compliance and overall product quality. Key Responsibilities: • Review manufacturing planning for incorporation of inspection and test points and determine special gauging requirements for manufactured products, • Determine FAIR requirements in accordance with AS9102, including identifying requirements, creating templates, reviewing and approving FAIR documentation, and maintaining records, • Facilitate customer returns, including validating return reasons, coordinating receiving inspections, creating work orders, and providing customer follow-up support, • Support contract reviews for new orders as needed, • Perform trend analysis on product issues and corrective actions related to product returns, • Perform additional duties and responsibilities as assigned Qualifications Required: • Bachelor’s degree (or equivalent practical industry experience) in Quality Assurance, Manufacturing Engineering, or a related technical discipline, • 1–5 years of experience in Quality Assurance and/or Quality Control, • Strong written and verbal communication skills, • Experience with mechanical and/or automated inspection techniques, • Thorough understanding of quality systems and problem-solving methodologies, • Strong analytical skills with proficiency in Microsoft Excel and other Microsoft Office programs, • Ability to interpret technical requirements, including drawings and standards, and apply them within quality systems and manufacturing processes, • Ability to problem-solve and effectively manage a variety of issues, • Excellent communication and time management skills, • Ability to work effectively both independently and within a team environment Work Environment & Physical Requirements: • Regularly required to stand and use hands and fingers to handle, operate, or feel objects, tools, and controls, • Ability to walk, bend, stoop, kneel, crouch, reach with hands and arms, and climb or maintain balance as needed, • Regularly required to communicate verbally with staff and effectively understand responses, • Occasional travel by road and/or air may be required to support client, vendor, and subcontractor needs, • Occasionally required to lift and move equipment weighing 30+ pounds, including overhead lifting, bending, prolonged standing, and twisting, • This position may alternate between sedentary and active responsibilities to support coordination and follow-up with various departments

Job Summary: Control Air Enterprises LLC is looking to hire an organized, timely, and respectful project engineer with a minimum of a bachelor’s degree in engineering, architecture or construction management to join our Anaheim office (Anaheim, CA). The project engineer must have short- and long-term processing abilities and demonstrate their ability to understand and comply with company, project, contractual requirements, and to provide clear and accurate documentation. Responsibilities will include but are not limited to the following: • Assist in managing large & complex HVAC construction projects., • Assist in managing subcontractor scope and performance of contractual requirements., • Assist in tracking field installation., • Organize, file, and track all project coordination and correspondence., • Accurate documentation to successfully track projects, including submittals, schedules, schedule, • Of values, billings, RFI’s (requests for information), requests for change orders, change orders,, • Project start-up and close-out (including timely processing of O&M’s and “as-built” packages)., • Learn all software programs utilized in the day-to-day business operations of the company. Basis of Evaluation: • Projects consistently meet or exceed expected profit objectives., • Effective control of deliveries to coincide with schedules and progress billing., • Timely review, approval, and submission of RFI's, requests for change orders, and change, • orders., • Timeliness and accuracy of submittals, project turnover and start-up packages., • Proper documentation of all projects reflecting the flow of the project., • Maintain and grow Control Air’s customer satisfaction and reputation. Required Characteristics: • Must have a strong work ethic and a “can-do” problem solving attitude., • Must be an excellent listener and communicator., • Must be proficient in Microsoft Office Outlook, Excel, and Word., • Bluebeam, Adobe editing, ACAD training is an advantage., • Experience in mechanical contracting is desired but not necessary., • Bachelor's degree in a Construction related profession or similar is required., • Must present a strong, confident and professional image., • Must be able to commute to different jobsites within the Bay Area. Skills: • Basic level of understating plans and specification., • Basic understanding of construction schedules., • Ability to interface with the clients., • Ability to coordinate with other team members., • HVAC/Mechanical Engineering (Preferred). Benefits include the following: • Medical, dental and vision benefits, • 401k retirement plan, • Life Insurance, • Long-Term Disability Insurance, • FSA & extra insurance, • Paid holidays, • Paid time off, • Employee stock ownership plan (ESOP) Pay range: $25 - $40 Hourly Join Us: Let’s be honest- life is too short to work at a job that you don’t love. So, do something about it! Come be a part of our team and work with us on industry defining projects. We are a family of passionate people, who are smart and kind, and have some pretty amazing skills. We love what we do, and love being California’s Homegrown Mechanical Experts. About Control Air Enterprises: We have been in business for over 42 years, are a full mechanical contracting firm specializing in Major Construction, Tenant Improvement, Industrial, Plumbing, Retrofit, Service, Controls, Energy Commissioning and Detailing. Our divisions can handle a wide range of projects and services that include Design Build, Design Assist and Plan & Spec for facilities in the Medical, Entertainment, Laboratory, Hotel, Resort, Office, Government, Education, Civic and Commercial industries. Oh, we are also 100% employed owned (ESOP), have over 1,000 family members, and have one of the largest fabrication shops in California. Our corporate headquarters are in Southern California (Anaheim - just south of Los Angeles), conveniently located near several major freeways. We also have offices in San Diego and Hayward (Northern California). Our manufacturing facilities are located in Anaheim (Southern California) and Hayward (Northern California). Equal Opportunity Employer, including disabled and veterans.

ABOUT THE COMPANY Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years. ABOUT THE JOB The Senior Product Sourcing Engineer drives the strategic supply network development and cost management of Anduril’s product hardware across their lifecycles, by collaborating with suppliers and cross-functionally, including folks in engineering, quality, and manufacturing. WHAT YOU'LL DO • Conduct supplier selection for a specific product, leveraging our approved supplier list, • Partner with strategic suppliers to accelerate product development via activities such as:, • Concept scoping to quickly solidify requirements, • Feature trade-off / trade tables, • Should cost / Clean sheet models, • Joint design development, via clear statements of work, • Simulation of mechanical & electronics designs, • Drive the development and consolidation of a manufacturing BOM, working with Quality & Manufacturing, to ramp production internally and with our suppliers with high flexibility, • Manage the CAPEX throughout NPI, • Conduct value-stream mapping to optimize supply network lead time and flexibility, • Complete the BOM risk assessment, include alternate component sourcing, etc., • Ensure completion of all component qualifications, ahead of production, • Reduce complexity: commonality optimization & component/supplier rationalization, • Lead all cost engineering activities to converge the bottoms-up cost curve to product cost, maximizing the total cost of ownership (TCO) across the product lifecycle, • Manage ad-hoc cost issues e.g., tariffs / import export cost, and cost inflation REQUIRED QUALIFICATIONS • Bachelor’s degree in supply chain, engineering, or related technical field, • 8+ years of experience in sourcing engineering, supplier engagement and development, or design of electronics and/or mechanical devices, • Domain expertise of value/procurement engineering or TCO-related work at the component & product level, • Ability to travel 10% - 40% of the time, variable based on program needs, • Ability to relocate, if not already local to be onsite in Costa Mesa, CA PREFERRED QUALIFICATIONS • Master's degree or advanced technical degree in mechanical engineering, • Deeper experience within:, • Design & development of electronics and/or mechanical devices, • Advanced sourcing activities, including stints as commodity/sourcing managers, • Supplier development (technology, process, supply chain, etc.), • Early supplier engagement, ahead of product/engineering requirement realization, • Familiarity with developing high-tech products in a high-mix, low-volume environment, • Exposure to working in a fast-pace, start-up environment, • Ability to obtain and maintain a U.S. TS clearance US Salary Range $146,000 - $194,000 USD The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: Healthcare Benefits • US Roles: Comprehensive medical, dental, and vision plans at little to no cost to you., • UK & AUS Roles: We cover full cost of medical insurance premiums for you and your dependents., • Income Protection: Anduril covers life and disability insurance for all employees., • Generous time off: Highly competitive PTO plans with a holiday hiatus in December. Caregiver & Wellness Leave is available to care for family members, bond with a new baby, or address your own medical needs., • Family Planning & Parenting Support: Coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting., • Mental Health Resources: Access free mental health resources 24/7, including therapy and life coaching. Additional work-life services, such as legal and financial support, are also available., • Professional Development: Annual reimbursement for professional development, • Commuter Benefits: Company-funded commuter benefits based on your region., • US Roles: Traditional 401(k), Roth, and after-tax (mega backdoor Roth) options., • UK & IE Roles: Pension plan with employer match., • AUS Roles: Superannuation plan.

Job Description: We are seeking a Fire Sprinkler and a Fire Alarm Designer who uses CAD equipment to provide support to Engineering department by preparing routine layouts of fire sprinkler systems, detail drawings, assembly drawings, sketches and diagrams. Details to include all views and dimensions necessary for installation. Make copies of drawings and maintains information regarding changes to database. Makes simple decisions but refers most questions / problems to lead designers or chief engineer. Solid understanding of drafting techniques and familiarity with design and fire sprinkler terminology. Mechanical aptitude with ability to complete basic mathematical calculations. Responsibilities: • Designs fire protection sprinkler systems with as much accuracy and detail as possible to enable the field installation to be completed with as few design errors as possible., • Reviews work order and procedural manuals to determine critical dimensions of design and designs fire protection sprinkler systems within allocated hours for each job., • Calculates figures to convert design dimensions to resizing dimensions specified for subsequent production, layout and installation processes., • Submits design plans to proper department leadership for approval and obtains permits as required. Confers with engineering and design staff to determine design modifications and enters editing information into computer., • Keys in specified information to produce graphic representation (hard copy) of design for review and approval by engineering and design staff., • Makes final sketch of proposed drawing, checking dimension of parts, materials to be used, relation of one part to another, and relation of various parts to whole structure or project., • Make revisions to size, shape and arrangement of parts to create practical design drawings., • Sketches rough layout of system and computes angles, weights, surface areas, dimensions, radii, clearances, tolerances, leverages and location of holes., • Drafts detailed multi-view drawings of layout and systems. Qualifications: • 3 years related experience and/or training in the design of fire sprinkler systems, fire alarm, water, foam and gas delivery systems; or equivalent combination of education and experience., • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization., • NICET Level 1 Certification a plus

JOB OPENING - PLUMBING ENGINEER & PROJECT MANAGER We are a full-service MEP engineering and consulting company. We are servicing the building industry in mechanical, electrical, and plumbing engineering services for different building types such as single-family custom homes, multifamily, mid-rise, high-rise, commercial, office spaces, retail, restaurants, mixed-use, and industrial. We have an opening for Plumbing Engineer &/or Project Manager who can handle the following responsibilities. • Design of residential and commercial plumbing systems including calculations, piping layout, riser diagrams, equipment schedules, and details, • Coordination of the plumbing plans per developer, builder, architect, civil engineer, and other disciplines plans and requirements., • Attending design and coordination meetings daily., • Managing the project from schematic design (SD) phase all the way through the final stages of construction administration (CA)., • Designing the plans using AutoCAD & REVIT REQUIREMENTS • Bachelor of Science in Mechanical Engineering or equivalent experience, • Plumbing Design and Project Management experience, 2-6 years (preferred), • Experience in AutoCAD & REVIT, • Microsoft Office, • Team player and detail oriented COMPENSATION • Salary Range: $65K-$75K, • Bonuses BENEFITS • Health insurance, • 401K, • Paid time off, • Paid vacations, • Paid sick time SCHEDULE • Monday-Friday 8:00 am - 5:00 pm Partial remote work can be offered, depending on capabilities and upper management approval. JOB TYPE • Full Time Interested applicant should forward resume to:

Electrical Design Engineer Irvine, CA Our exciting Space client is seeking an experienced Electrical Engineer to play a key role in the development of a remote sensing payload. In this role, you will own the payload electrical design and ensure seamless integration across all subsystems. You will be responsible for PCB design and modification, interface definition, test planning, and troubleshooting. Key Responsibilities: • Own the payload electrical design, including power distribution, harnessing, PCB designs and PCB manufacturing chain., • Define, maintain, and enforce electrical interface control documents (ICDs) between the payload and the host spacecraft bus., • Lead development of payload electrical test protocols, including integration, environmental, and pre/post integration verification., • Collaborate with mechanical, RF, and software teams to ensure electrical design decisions align with system-level requirements., • Support system trade studies related to power, thermal, and GNC constraints., • Troubleshoot electrical anomalies during integration and test., • Generate and maintain design documentation, schematics, manufacturing packages and engineering reports. Minimum Qualifications: • Bachelor’s degree in Electrical Engineering, Computer Engineering, or related field., • 5+ years of experience in full lifecycle electrical hardware design., • Proven experience in electrical design lifecycle and manufacturing package generation, including BOM item assessments., • Experience in system-level integration and testing, including environmental testing (vibe, TVAC, EMI/EMC). Preferred Qualifications: • Master’s degree in Electrical Engineering, Computer Engineering, or a related field, • Proven experience with spacecraft power systems, harnessing, and bus interfaces., • Experience with ISR or remote sensing payloads, • Familiarity with spacecraft GNC constraints as they pertain to payload performance., • Knowledge of embedded systems, FPGAs, or avionics board design, • Familiarity with design-for-test (DFT) and test automation frameworks, • Experience performing system-level trades and contributing to subsystem productization

Assistant Project Manager / Senior Project Engineer – Water & Wastewater Construction We are seeking an experienced Assistant Project Manager or Senior Project Engineer to support the successful delivery of complex water and wastewater infrastructure projects. This individual will play a key role in managing project execution from preconstruction through closeout, working closely with project managers, superintendents, owners, engineers, and subcontractors. The ideal candidate will have experience on self-perform water/wastewater treatment plant projects including concrete structures, underground utilities, process mechanical piping, and equipment installation. Responsibilities • Support overall project execution including scheduling, budgeting, procurement, subcontract management, and client coordination, • Manage RFIs, submittals, change orders, meeting minutes, and project documentation, • Assist with project cost tracking, forecasting, and monthly reporting, • Coordinate with field teams to ensure work is progressing safely, on schedule, and in accordance with contract documents, • Work closely with owners, engineers, inspectors, and subcontractors to resolve technical and construction issues, • Help manage procurement and delivery of long-lead process equipment and materials, • Participate in project planning, sequencing, and scheduling efforts, • Support quality control, commissioning, and project closeout activities, • Mentor junior engineers and help drive project team performance Qualifications • Bachelor’s degree in Civil Engineering, Construction Management, Mechanical Engineering, or related field, • 4+ years of experience for Senior Project Engineer candidates, • 6+ years of experience for Assistant Project Manager candidates, • Strong background in water/wastewater treatment plant construction preferred, • Experience with self-perform concrete, piping, mechanical, or underground utility scopes, • Knowledge of scheduling software, cost control, and project management systems, • Strong communication, organizational, and problem-solving skills, • Ability to work collaboratively in a fast-paced construction environment Preferred Experience • Water Treatment Plants (WTP), • Wastewater Treatment Plants (WWTP), • Pump Stations, • CMAR and Design-Build delivery methods, • Process mechanical piping and equipment installation, • Public works and municipal infrastructure projects Compensation & Benefits • Competitive base salary, • Bonus opportunities, • Vehicle allowance or company vehicle, • Comprehensive benefits package, • 401(k) with company match, • Long-term growth opportunities within a leading water infrastructure contractor

Job Description Aerospace Mechanical Assembler – 2nd Shift Job Description This role focuses on high-volume, repetitive mechanical and electronic assembly work in a fast-paced military and defense production facility in Santa Ana, CA. You will assemble and test mechanical assemblies, wire harnesses, junction boxes, and related components using a variety of hand and power tools, while following blueprints, wiring diagrams, and detailed assembly instructions. This is a 2nd shift position (2:30 p.m.–11:00 p.m.) with regular opportunities for overtime during the week and on Saturdays. Responsibilities • Perform repetitive mechanical assembly of high-quality mechanical assemblies, wire harnesses, test racks, junction boxes, and associated components according to engineering drawings and work instructions., • Use common hand tools and power tools such as pliers, wrenches, screwdrivers, depth micrometers, calipers, dial indicators, pressure gauges, multimeters, and test boxes to assemble and verify components., • Read and interpret blueprints, schematics, and wiring diagrams to complete assemblies accurately and efficiently., • Perform hand soldering and component fabrication as required for electronic and electromechanical assemblies., • Carry out validation and testing of electronic components using equipment such as multimeters, oscilloscopes, network analyzers, RF test systems, and test racks., • Inspect assemblies and components for quality, ensuring they meet specifications and standards before moving to the next stage of production., • Troubleshoot electronic box assemblies, PCBA assemblies, and RF systems, and document issues by writing clear and detailed issue tickets for failures., • Run functional checkouts and tests on completed assemblies, identify issues discovered during these processes, and work to diagnose and resolve them., • Apply common air-frame construction techniques such as installing rivets, mechanical fasteners, nut plates, and similar hardware when required., • Work productively in a high-paced production environment with a goal of contributing to a team output of approximately 5,000 units per month., • Rapidly adapt to changing roles and responsibilities based on production needs while maintaining high quality and safety standards., • Use computers for standard browser tasks, word processing, documentation, and test or assembly-related software as needed., • Communicate effectively in verbal and written form with engineering, production, and other team members to clarify requirements, report issues, and support continuous improvement., • Follow all safety procedures, including the use of required personal protective equipment such as steel toe or composite toe footwear., • At least 2 years of experience working in a manufacturing environment, such as aerospace, electronics, or medical device production, performing mechanical assemblies., • Strong proficiency with common hand tools and power tools, including pliers, wrenches, screwdrivers, depth micrometers, calipers, dial indicators, pressure gauges, and multimeters., • Ability to read and interpret blueprints, schematics, and wiring diagrams and follow detailed assembly instructions., • Working knowledge of common electrical components and their functions within assemblies., • Proficiency using computers for standard browser tasks and word processing applications to support documentation and communication., • Ability to perform repetitive mechanical assembly work while maintaining accuracy, consistency, and attention to detail., • Capability to work effectively in a high-paced, production-driven environment with demanding output goals., • Strong troubleshooting skills for mechanical, electronic, and PCBA assemblies, including diagnosing and resolving issues discovered during testing., • Effective verbal and written communication skills for collaboration with engineering and production teams., • Ability to rapidly change roles and responsibilities based on shifting priorities and production needs., • Ability and willingness to work 2nd shift hours (approximately 2:30 p.m.–11:00 p.m.) and to support overtime and weekend work when needed., • Experience in aerospace, electronics, or medical manufacturing environments., • Hands-on experience with mechanical assembly in a repetitive, high-volume production setting., • Experience performing hand soldering and component fabrication for electronic assemblies., • Familiarity with electronic box assembly and troubleshooting, including documenting issues through detailed tickets., • Experience performing validation and testing of electronic components using multimeters, oscilloscopes, network analyzers, RF test systems, and test racks., • Experience in common air-frame construction techniques, including installing rivets, mechanical fasteners, and nut plates., • Experience with PCBA (printed circuit board assembly) testing and troubleshooting., • Ability to perform inspection tasks to verify assembly quality and conformance to specifications. You will join a rapidly growing organization that offers long-term stability, ongoing training, and clear opportunities for professional growth. The company invests in its people with strong benefits and the potential for equity once you move into a direct role, allowing you to share in the organization’s success. You will work in a modern, well-supported facility where your contributions directly support meaningful, cutting-edge projects, and you will be part of a team-focused culture that values continuous improvement and skill development. Work Environment This position is based in a clean, modern military and defense manufacturing facility in Santa Ana, CA. You will work on 2nd shift (approximately 2:30 p.m.–11:00 p.m.), with regular opportunities for weekday and Saturday overtime depending on production needs. The environment is fast-paced and production-driven, with a team goal of producing around 5,000 units per month. You will use a wide range of hand and power tools, precision measuring instruments, soldering equipment, and electronic test equipment such as multimeters, oscilloscopes, network analyzers, RF test systems, and test racks. The facility is part of a large, growing organization that is expanding and has secured funding to build a new facility, offering a sense of long-term growth and investment in infrastructure. Steel toe or composite toe safety shoes or boots are required as part of the on-site safety attire. Job Type & Location This is a Contract to Hire position based out of Santa Ana, CA. Pay and Benefits The pay range for this position is $28.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionMechanical Assembler / Aerospace AssemblerAerospace Manufacturing | Blueprint Reading | Riveting | Precision AssemblySanta Ana, CA | Full-Time | $25-$35/hour DOE Are you experienced in mechanical assembly, aerospace manufacturing, or precision production work? We are seeking a detail-oriented Mechanical Assembler / Aerospace Assembler to join a growing aerospace manufacturing team in Garden Grove, CA. This position is ideal for candidates with experience using hand tools, power tools, blueprints, rivet equipment, drill presses, and precision measuring instruments in a manufacturing or aircraft assembly environment. This role requires strong attention to detail, the ability to work with tight tolerances, and a commitment to quality and safety standards in a fast-paced production setting. Due to government contract requirements, candidates must be a U.S. Citizen to be considered for this position. Position Summary This position is responsible for assembling structural components and subassemblies using blueprints, engineering drawings, work instructions, hand tools, and power tools in a precision manufacturing environment. The ideal candidate will have experience working with tight tolerances, drilling, riveting, hardware installation, blueprint reading, and aircraft or manufacturing assembly processes. This position may also support troubleshooting, rework, equipment setup, and training of junior assemblers as needed. This is an excellent opportunity for individuals with mechanical assembly, aerospace assembly, aircraft manufacturing, production assembly, or manufacturing technician experience looking to grow within a stable and team-oriented environment. Essential Duties & Responsibilities Responsibilities include, but are not limited to: • Determine detail and hardware locations using blueprints and mylars, • Set up and operate drill presses, pneumatic drills, rivet pullers, hand squeezes, and “C” squeezes, • Set up countersinks according to fastener requirements and shop router instructions, • Work with extremely tight tolerances and precision measurements, • Drill holes in structures and subassemblies according to blueprint and customer specifications, • Attach brackets, hinges, clips, and hardware components using rivets, bolts, and screws, • Install units, equipment, components, and subassemblies using hand tools and power tools, • Position and align subassemblies in jigs and fixtures using measuring instruments and blueprint reference points, • Locate and mark installation reference points using templates, jigs, and measuring tools, • Inspect and test installed parts and assemblies for fit, performance, quality, and compliance, • Read and interpret assembly drawings, wiring lists, blueprints, and work instructions, • Perform rework from test failures according to standard repair procedures, • Assist with setup and operation of automated assembly equipment as needed, • Complete all required quality and production documentation, • Perform preventative maintenance on assembly tooling and presses, • Verify hardware and part counts according to shop router requirements, • Maintain a clean, organized, and safety-compliant work area, • Complete required safety and operational training, • 1–2 years of mechanical assembly, aerospace assembly, manufacturing, or production experience preferred, • High school diploma or equivalent required, • Must be a U.S. Citizen due to government contract requirementsTechnical Skills, • Strong blueprint reading and engineering drawing interpretation skills, • Experience using hand tools, power tools, drill presses, rivet tools, and measuring instruments, • Ability to read and interpret specifications, work instructions, and design changes, • Working knowledge of aircraft manufacturing or precision manufacturing processes, • Familiarity with customer specifications and quality requirements, • Experience using calipers, micrometers, and precision measuring tools, • Strong mathematical skills including fractions, multiplication, division, addition, and subtraction, • Excellent attention to detail and hand-eye coordination, • Strong communication and teamwork skills, • Ability to follow safety procedures and maintain quality standards, • Commitment to maintaining a clean and organized workspacePhysical Requirements, • Ability to lift and/or move up to 50 lbs, • Ability to stand for extended periods of time, • Frequent use of hands for handling, assembling, gripping, and operating tools, • Ability to reach with hands and arms for extended periods Qualified applicants will be contacted by our recruiting team to discuss experience, availability, and next steps. For immediate consideration, please apply today. About Us At Express Employment Professionals Costa Mesa, we help people find great jobs and companies find great people. Whether you are seeking a long-term career opportunity or looking to grow your experience in manufacturing and aerospace assembly, our team is here to help connect you with the right opportunity. Express Employment Professionals is an Equal Opportunity Employer and complies with all applicable federal, state, and local laws regarding nondiscrimination. We are proud to be an E-Verify employer. Certain positions may require background checks and/or drug screenings, where permitted by law. #3411CA

Job Description RBC Bearings Incorporated (NYSE: RBC) is a leading international manufacturer of highly engineered precision bearings and components for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and engineered components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 60 facilities, of which 43 are manufacturing facilities in ten countries and our market capitalization is approximately $14.5 billion. JOB TITLE/LOCATION: Sales Development Associate – Santa Ana, CA POSITION SUMMARY: The Sales Development Associate role is designed for recent college graduates and early‑career professionals seeking a long‑term career in Aerospace sales. Through RBC’s comprehensive Rotational Development Program, associates build a strong foundation in technical and engineering, product, and operational knowledge by working directly within key functional areas. During these structured rotations, participants gain hands‑on experience with RBC’s products, manufacturing processes, and internal workflows while supporting real customer needs through technical problem solving and service coordination. This immersive, cross‑functional exposure equips associates with a deep understanding of how products are engineered, produced, and applied in the field. By bridging technical teams and customer-facing functions, the program develops the critical product expertise, commercial acumen, and practical experience needed to become a highly effective Outside Sales Engineer and contribute as part of RBC’s world‑class Aerospace sales team. The rotational development program curriculum will integrate a balanced mix of internal and external learning opportunities, self‑directed training, collaborative coaching, and hands‑on project work to ensure comprehensive career development and equips associates with both practical skills and core competencies essential to success. CAREER DEVELOPMENT AND KEY RESPONSIBILITIES: • Build a foundational understanding of RBC’s product management workflow and Product Lifecycle Management., • Build comprehensive knowledge of RBC’s full product portfolio, specialty products, and each division’s major products and applications., • Learn RBC’s market research, data analysis, and insight‑generation methodologies., • Gain foundational knowledge of pricing strategies, negotiation techniques, and account management principles., • Develop data‑driven proposals, research, and trend analysis to support product strategy, market positioning, audits, and customer inquiries., • Gain cross‑functional exposure to supply chain, purchasing, quality, inventory control, planning, application engineering, machining, testing, automation, and tooling., • Manage service‑related issues to reinforce customer trust and establish credibility as a trusted technical advisor., • Apply operational and technical knowledge to support customer requirements and product strategies., • Serve as a liaison between technical teams and customer‑facing functions, bridging engineering expertise with sales responsibilities., • Develop a clear understanding of end‑to‑end manufacturing processes, next‑level assemblies, and internal operational capabilities., • Develop technical and troubleshooting competency through direct customer interaction and application support., • Provide actionable feedback to internal departments to improve products, processes, and overall customer experience. EDUCATION AND EXPERIENCE: • Associate’s degree or higher in Business, Communications, Marketing, or related field., • Coursework or exposure in communications, sales, or marketing preferred., • Familiarity with technical sales or mechanical/engineering concepts is a plus., • Prior experience in customer service, market research, sales, or other customer‑facing roles preferred. Physical and Environmental Elements: While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. Also, the employee is regularly required to sit and talk or to listen. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status). Please include ALL work experiences on your resumes. We are only considering local candidates at this time. Please note that the salary range information is only applicable to California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee’s pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $70,500 - 76,500. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Eleven Recruiting is searching for a Senior Program Manager to join one of our largest Aerospace Manufacturing clients sitting onsite in Santa Ana, CA. The Program Manager will be overseeing the delivery of complex commercial, military, and space component programs. This individual will be responsible for managing the full product lifecycle — from development through production — ensuring all program objectives related to cost, quality, delivery, and customer satisfaction are met. The Program Manager will serve as the primary liaison between internal teams and external customers, maintaining strong control over schedules, budgets, and technical execution. Responsibilities: • Serve as the primary point of contact for customer communications regarding program schedules, technical requirements, contract deliverables, and status updates., • Manage and coordinate customer orders, engineering changes, change requests, and RFQs., • Maintain full financial ownership of assigned programs, including tracking costs, forecasting, earned value analysis, and internal/external reporting., • Lead cross-functional teams across engineering, manufacturing, quality, and supply chain to achieve program milestones and resolve issues., • Ensure compliance with all internal procedures, customer specifications, and regulatory standards (e.g., AS9100, ITAR)., • Drive accountability by using KPIs, earned value metrics, and program reviews to monitor performance and course-correct when needed., • Lead risk identification and mitigation planning to maintain program stability., • Coordinate the timely delivery of hardware/software and contract data requirements., • Provide detailed reporting and recommendations to senior leadership and customers., • Support new business proposals and assist with developing cost and technical narratives., • Champion a culture of operational excellence, continuous improvement, and proactive problem-solving. Qualifications: • Bachelor's degree in Business, Manufacturing, Engineering, or a related technical field is required., • Minimum of 10 years of program or project management experience in the aerospace or defense industry., • Proven success in managing complex aerospace or space-related programs through the full product lifecycle., • Experience working with aerospace primes and Tier 1 customers such as Boeing, Lockheed Martin, Northrop Grumman, SpaceX, or the U.S. Department of Defense., • Strong technical understanding of aerospace product development, including fabrication, composites, ducting systems, and mechanical assemblies., • Knowledge of AS9100D quality standards, ITAR/EAR compliance, and defense industry requirements., • Demonstrated ability to lead teams through development, prototyping, production, and delivery., • Skilled in coordinating with manufacturing, quality, supply chain, and engineering to meet customer requirements and resolve production issues., • Proficient in MRP/ERP systems to support material and production planning., • Advanced financial acumen; experienced in cost analysis, scheduling, budgeting, and earned value management., • Strong command of Microsoft Office, including MS Project, Excel, and PowerPoint., • Excellent communication skills, both written and verbal, with a strong customer-facing presence., • Ability to lead in a fast-paced, deadline-driven environment with a high level of ownership and accountability. Salary: $150,000 - $175,000

Job Description Description: Electromechanical Assembler 2 1st Shift: 5:30 AM – 2 PM Temp to hire Range: $18.90 - $25.20 (target $24) Position Summary: Works under general supervision and is responsible for work output. On a production basis, performs electronic and electromechanical assembly and subassembly work. Semi-repetitive to repetitive-type work. May make simple decisions but must generally follow well established precedents. Responsibilities: An individual must be able to perform each essential duty satisfactorily. Good understanding of ESD controls, resistance welding, working under microscopes, soldering, epoxy mixing, bonding, assembly and packaging techniques, as well as handling of classified assemblies. Essential duties include, but are not limited to: Working under the microscopes for long periods of time; Handling of small parts and piezoelectric crystals; Intermediate cable harness and PCB assembly techniques; Intermediate mechanical assembly of small parts; Ability to read basic blueprints and work instructions; High voltage potting and high voltage testing Qualifications: High school diploma or general education degree (GED). Three (3) or more years of related electronics assembly experience. J-STD-001 Certification preferred. Ability to deal with problems involving a few concrete variables in standardized situations. As a member of the organization, the employee is expected to work effectively with co-workers, customers and others by sharing ideas in a constructive and positive manner. Ability to listen to and objectively consider ideas and suggestions from others; keeping commitments; keeping others informed of work progress, timetables and issues; addressing problems and issues constructively to find mutually acceptable and practical business solutions; addressing others by name, title or other respectful identifier and respecting the diversity of our work force in actions words and deeds. This position may interact with other departments within the Company, such as Quality, Production Control and Engineering. The position requires strong cooperative teamwork, as well as the ability to work independently. Basic computer skills will be needed to log into work orders, access time cards, and log workorders for special process. Must be able to operate winding/braiding machinery, torque wrenches, digital multi-meters, up to 12kv Hipot, solder irons, cutters, wire strippers, crimpers, heat guns, common hand tools and the use of a microscope. The physical demands described here are representative of those an employee must meet to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential duties. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, use hands to finger, pound or feel, reach with hands and arms, and talk or hear. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, and ability to adjust focus. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job. This job description is not intended to be all-inclusive. An employee may also perform other reasonably related business duties as assigned by his/her supervisor.

About The Role: The Field Engineer (FSE) provides the front line interface of our systems to the customer. The FSE, under minimal supervision, and with broad scope of responsibility, performs field service activities involving the installation, maintenance, repair and modification of our systems at a customer facility. The FSR must have excellent, customer centered, communication skills. Please note that this position involves 60% travel requirements. Who We're Looking For: • Diploma or degree in a technical field including, but not limited to: mechanical, electrical, computer, biomedical., • 3 - 5 years experience programming Allen-Bradley PLCs., • Conveyor and Automation experience., • Engineering and Electrical experience., • 7+ years of direct field service (or equivalent) experience troubleshooting and repairing computerized electro-mechanical systems., • Perform software and hardware preventive and corrective maintenance., • Perform software and hardware emergency break fix service calls., • Refines and validates PLC Coding., • Works with the facility to schedule appropriate downtime for preventive and corrective maintenance., • Responsible for timely and accurate completion of all paperwork and reports. This includes ticket updates and closures, expenses, timesheets and other administrative requirements., • Responsible for following up on open issues, tickets and escalations., • Working Outside normal business hours may required to service products., • Performs other duties as required.

Senior R&D Scientist - Atmospheric Water Harvesting Location: Irvine, CA Join a trailblazing startup founded by a renowned Professor in transforming the future of water and air. As a Senior R&D Scientist, you'll be at the heart of pioneering technologies for atmospheric water harvesting and CO2 capture, driving innovations that make a global impact. Why You Should Apply • Lead cutting-edge research in atmospheric water harvesting., • Competitive salary and benefits package., • Collaborate with top-tier scientists and engineers., • Play a crucial role in the commercialization of breakthrough technologies., • Contribute to sustainability and environmental solutions. What You’ll Be Doing: • Work with the head of Product Engineering to scale up MOF/COF-based technologies., • Collaborate with R&D scientists on technical and functional specifications., • Design and develop heat management systems, optimizing components like heat exchangers and thermal storage., • Scale technologies from prototype to commercial stage., • Optimize system parameters to enhance performance, efficiency, and safety., • Evaluate and manage sourcing of materials and components., • Set up QC/QA processes and procedures for production., • Maintain detailed electronic notebooks and contribute to intellectual property., • Report periodically to management and participate in technical meetings. About You: • PhD in mechanical engineering or a similar field with a strong research background., • Proficient in thermodynamics, fluid mechanics, and heat transfer., • Over 5 years of industrial R&D experience., • Skilled in designing system-level prototypes and using simulation tools., • Familiar with health and safety procedures in production., • Excellent teamwork, problem-solving, and communication skills. How To Apply We’d love to see your resume, but we don’t need it to have a conversation. Send us an email to and tell us why you’re interested. Or, feel free to email your resume. Please include Job#19433.

PLUMBING DESIGNER LOCATION: Irvine, CA | Full-Time | Hybrid (Up to 2 Remote Days/Week) ABOUT THE ROLE Linwood Engineering, Inc. (LEi) is seeking a Plumbing Designer to join our growing MEP (Mechanical, Electrical, Plumbing) team in Irvine, CA. This is a hands-on design role that offers exposure to diverse project types, collaboration with experienced engineers, and a clear path toward leadership opportunities. We’re looking for a technically skilled, detail-oriented individual who enjoys problem-solving and contributing to high-performance building design. WHAT YOU’LL DO • Plan and design plumbing systems for a wide range of building types., • Perform calculations, equipment sizing, system layouts, and specifications., • Prepare basis-of-design narratives, technical documentation, and construction drawings., • Research and apply building and plumbing code requirements to ensure compliance., • Develop coordinated design solutions and communicate effectively with the project team., • Review drawings and perform QA/QC to maintain technical accuracy and quality standards., • Mentor junior designers and drafters, supporting their technical growth., • Manage project deliverables and assist with department production schedules. QUALIFICATIONS (REQUIRED) • 3–5 years of plumbing design experience in an MEP consulting environment., • Proven experience with plumbing system design for commercial, multifamily, restaurant, retail, hospitality, office, healthcare (HCAi), or higher education projects., • Proficiency in Revit and AutoCAD (minimum 2 years professional experience in each)., • Working knowledge of California Building and Plumbing Codes., • Proficiency with Bluebeam Revu and Microsoft 365 (Teams, Excel, Word, OneNote)., • Excellent written and verbal communication skills., • Strong time management and organizational abilities with the capacity to manage multiple priorities., • Ability to work independently while collaborating effectively within a multidisciplinary team. PREFERRED QUALIFICATIONS • Certification as a Certified Plumbing Design Technician (CPDT) or Certified Plumbing Designer (CPD)., • Engineer-in-Training (EIT) credential., • Knowledge of HVAC systems and Title 24 energy compliance., • Experience with project management or client coordination. WHY JOIN LINWOOD Linwood Engineering is a full-service MEP firm built on collaboration, technical excellence, and opportunity. You’ll work on projects of all sizes and complexities in a supportive environment that values innovation, quality design, and professional growth. BENEFITS • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance SITE AMENITIES Our Irvine campus features a 400-seat food court, outdoor recreation areas (pickleball, bocce, basketball, putting green, cornhole, and more), and abundant open seating for breaks. We’re steps from Park Place retail and restaurants, and less than a mile from John Wayne Airport, with on-site overnight parking available upon request. Linwood Engineering, Inc. is an equal opportunity employer. We are committed to creating an inclusive environment for all employees

Job Description Aerospace Manufacturing Technician – 2nd Shift Job Description This role focuses on high-volume, repetitive mechanical and electronic assembly work in a fast-paced military and defense production facility in Santa Ana, CA. You will assemble and test mechanical assemblies, wire harnesses, junction boxes, and related components using a variety of hand and power tools, while following blueprints, wiring diagrams, and detailed assembly instructions. This is a 2nd shift position (2:30 p.m.–11:00 p.m.) with regular opportunities for overtime during the week and on Saturdays. Responsibilities • Perform repetitive mechanical assembly of high-quality mechanical assemblies, wire harnesses, test racks, junction boxes, and associated components according to engineering drawings and work instructions., • Use common hand tools and power tools such as pliers, wrenches, screwdrivers, depth micrometers, calipers, dial indicators, pressure gauges, multimeters, and test boxes to assemble and verify components., • Read and interpret blueprints, schematics, and wiring diagrams to complete assemblies accurately and efficiently., • Perform hand soldering and component fabrication as required for electronic and electromechanical assemblies., • Carry out validation and testing of electronic components using equipment such as multimeters, oscilloscopes, network analyzers, RF test systems, and test racks., • Inspect assemblies and components for quality, ensuring they meet specifications and standards before moving to the next stage of production., • Troubleshoot electronic box assemblies, PCBA assemblies, and RF systems, and document issues by writing clear and detailed issue tickets for failures., • Run functional checkouts and tests on completed assemblies, identify issues discovered during these processes, and work to diagnose and resolve them., • Apply common air-frame construction techniques such as installing rivets, mechanical fasteners, nut plates, and similar hardware when required., • Work productively in a high-paced production environment with a goal of contributing to a team output of approximately 5,000 units per month., • Rapidly adapt to changing roles and responsibilities based on production needs while maintaining high quality and safety standards., • Use computers for standard browser tasks, word processing, documentation, and test or assembly-related software as needed., • Communicate effectively in verbal and written form with engineering, production, and other team members to clarify requirements, report issues, and support continuous improvement., • Follow all safety procedures, including the use of required personal protective equipment such as steel toe or composite toe footwear., • At least 2 years of experience working in a manufacturing environment, such as aerospace, electronics, or medical device production, performing mechanical assemblies., • Strong proficiency with common hand tools and power tools, including pliers, wrenches, screwdrivers, depth micrometers, calipers, dial indicators, pressure gauges, and multimeters., • Ability to read and interpret blueprints, schematics, and wiring diagrams and follow detailed assembly instructions., • Working knowledge of common electrical components and their functions within assemblies., • Proficiency using computers for standard browser tasks and word processing applications to support documentation and communication., • Ability to perform repetitive mechanical assembly work while maintaining accuracy, consistency, and attention to detail., • Capability to work effectively in a high-paced, production-driven environment with demanding output goals., • Strong troubleshooting skills for mechanical, electronic, and PCBA assemblies, including diagnosing and resolving issues discovered during testing., • Effective verbal and written communication skills for collaboration with engineering and production teams., • Ability to rapidly change roles and responsibilities based on shifting priorities and production needs., • Ability and willingness to work 2nd shift hours (approximately 2:30 p.m.–11:00 p.m.) and to support overtime and weekend work when needed., • Experience in aerospace, electronics, or medical manufacturing environments., • Hands-on experience with mechanical assembly in a repetitive, high-volume production setting., • Experience performing hand soldering and component fabrication for electronic assemblies., • Familiarity with electronic box assembly and troubleshooting, including documenting issues through detailed tickets., • Experience performing validation and testing of electronic components using multimeters, oscilloscopes, network analyzers, RF test systems, and test racks., • Experience in common air-frame construction techniques, including installing rivets, mechanical fasteners, and nut plates., • Experience with PCBA (printed circuit board assembly) testing and troubleshooting., • Ability to perform inspection tasks to verify assembly quality and conformance to specifications. You will join a rapidly growing organization that offers long-term stability, ongoing training, and clear opportunities for professional growth. The company invests in its people with strong benefits and the potential for equity once you move into a direct role, allowing you to share in the organization’s success. You will work in a modern, well-supported facility where your contributions directly support meaningful, cutting-edge projects, and you will be part of a team-focused culture that values continuous improvement and skill development. Job Type & Location This is a Contract to Hire position based out of Santa Ana, CA. Pay and Benefits The pay range for this position is $28.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Company Description Established in 1984, Chroma ATE, Inc. is a global leader in precision Test and Measurement Instrumentation, Automated Test Systems, and Turnkey Test & Automation Solutions, operating under the renowned "Chroma" brand. The company serves various advanced technology industries, including LED, Photovoltaic, Electric Vehicle (EV/EVSE), Semiconductor, and Power Electronics. Chroma is at the forefront of innovation, providing critical solutions for applications such as electrical safety, automated optical inspection, and manufacturing execution systems. With a commitment to quality and precision, Chroma continues to drive advancements across multiple high-tech sectors. Role Description Field Support to Chroma Semiconductor Equipment Primary Responsibilities • Test and optimize automated equipment in the semiconductor field, • Communicate with customers regarding testing applications for automated equipment, • Determine materials, equipment, and installation sequences to maximize efficiency, • Define layout diagrams, orientations, locations, facility requirements, and building features for equipment installation, • Assist with kit design and participate in design reviews for implementation, • Commission equipment and verify system functionality to meet performance expectations, • Troubleshoot and repair electrical, motor, and pneumatic systems, • Perform calibration, installation, configuration, and recipe tuning of automated equipment, • Identify hardware, software, or safety issues and provide feedback to the technical team, • Identify design or assembly issues and provide feedback to technical or production teams, • Provide training on system operation, maintenance, and calibration, • Maintain a clean and safe work environment, • Manage preventive maintenance schedules and maintain service records, • Travel up to 25 % Qualifications / Education / Experiences / Skills • Must have current authorization to work in the USA, • Knowledge of computer peripherals, • Ability to interpret technical drawings and schematics for troubleshooting and debugging, • Ability to perform hands-on work using basic hand tools, • Bachelor’s degree in electrical engineering (EE) or Mechanical Engineering (ME) preferred, • Bilingual preferred: English and Chinese Benefits • 401(k) with employer match, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Life insurance, • Long term & short term disability insurance, • Paid time off, • Paid Parental leave, • Vision insurance

P2S stands as a provider of professional engineering services to a broad range of markets, including higher education, healthcare, ports/harbors, industrial, entertainment, commercial, laboratories, municipal, and federal sectors. Our specialties include electrical, mechanical, plumbing, fire protection, and technology integration. Our offered services range from engineering and commissioning to construction management. With over 300 dedicated employees, P2S is an internationally recognized leader in many of the key markets we serve. We provide a blend of innovation and technical excellence in delivering green solutions that enhance and sustain the built, natural, and social environments. Currently, we have offices in Long Beach, Seattle, Irvine, San Diego, Los Angeles, and San Jose. Are you an Electrical Design Engineer with 2+ years of experience looking to grow your career? Join our award-winning team. Recognized as a Best Place to Work for over a decade, P2S offers a collaborative, innovative environment where your contributions make a real impact. We're seeking a talented Electrical Design Engineer to support our healthcare studio in our Long Beach or Irvine office. If you're passionate about sustainable design, technical excellence, and leading impactful projects, we'd love to hear from you. Employment Type: Full-time Work Schedule: Hybrid - 3 days in-office, 2 days remote Salary Range: $85,000 - $102,000 based on experience Career Level: Entry Location: Long Beach, CA or Irvine, CA General Responsibilities As an Electrical Design Engineer, you will independently prepare, plan, and execute small to medium-sized healthcare projects with general supervision. You'll apply standard design techniques, perform engineering calculations, and contribute to construction documentation and administration. Pre-Design Engineering • Review existing as-built drawings, • Conduct field investigations, • Set up drawings and models for multiple disciplines, • Coordinate design schedules and deliverables, • Perform feasibility studies, • Prepare schematic designs, • Design Engineering, • Perform energy calculations using EnergyPro or IES VE, • Develop single-line diagrams and load schedules, • Design lighting systems and controls, • Engineer normal, emergency, and renewable power systems, • Conduct Arc Flash, Short Circuit, and Coordination Power System Studies, • Experience with low-voltage building systems (Fire Alarm, Security, Voice/Data, Nurse Call) is a plus, • Design Complexity, • Perform routine engineering work using standard techniques, • Conduct basic engineering calculations, • Prepare construction estimates and specifications for small projects, • Independently develop small reports and peer review small projects, • Construction Administration, • Review submittals and respond to RFIs, • Produce meeting reports and punch lists, • Participate in construction meetings and provide clarifications Education & Certification • Bachelor's Degree in Electrical Engineering or related field, • Engineer-In-Training (EIT) Certification preferred, • LEED Accreditation is a plus Experience Required • Minimum 2 years of engineering design experience post-graduation or equivalent professional experience, • Prior experience working on healthcare/hospital buildings preferred Working Knowledge • Microsoft Office Suite, • AutoCAD, • Revit (a plus), • California Building Code (a plus), • National Electrical Code (a plus), • HCAI experience (a plus), • Net Zero Energy/Carbon design (a plus) #LI-Hybrid #LI-CC1 What sets P2S apart? For 15 years in a row, P2S has been regarded as a "Best Place to Work" by our employees. Why? Because we value satisfied employees just as much as satisfied clients. With competitive benefits, flexible work schedules, paid training/professional memberships, and more. - we aim to attract the best talent and keep them here Learn more about what it means to work at P2S: ___ P2S is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. About Legence ___ (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. Benefits 401(k) Plan with Company Match: Currently match contributions dollar-for-dollar up to 4% of eligible pay; immediate vesting. Health & Welfare Benefits: Employer provided medical, dental, vision, prescription drug, Employee Assistance Program and accident & illness coverage. Life and Disability Insurance: Employer provided basic life insurance and AD&D valued at 50K coverage amount with the option for voluntary buy-up for additional coverage. Time Off: Flexible non-accrual vacation; company holidays per policy. (For California employees, this is separate from California paid sick leave, if applicable.) Expenses: Business travel and related expenses reimbursed per company policy. Discount Program: Company-sponsored discount program with savings on multiple lifestyle categories. Reasonable Accommodations If you need assistance or accommodations during the application or interview process, please contact us at ___ or your dedicated recruiter with the job title and requisition number. Third-Party Recruiting Disclaimer Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. Pay Disclosure & Considerations Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. Equal Employment Opportunity Employer Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations.

Menlo Micro has reinvented one of the most fundamental building blocks of electronic systems - the electronic switch. Menlo Micro's technology creates a new switch category that eliminates compromises and tradeoffs by combining the benefits of electromechanical and solid-state switches into the best of both worlds with its "Ideal Switch." Are you interested in playing a critical, impactful role and work with top electronic systems talent at an exciting startup backed by industry leaders? Do you want to help create truly disruptive and unique products that will change markets? If you answered yes to both, this may be your opportunity to have a significant impact in a cutting-edge startup with industry-leading technology that will drive electronic systems innovation across a diverse range of industries. The Director, Test and Product Engineering will lead a team responsible for defining, developing, and deploying test strategies for advanced MEMS switch products. This role requires strong technical expertise in MEMS or semiconductor test methodologies, leadership in managing cross-functional teams, and strategic vision to scale test infrastructure to meet quality, yield, and cost targets. As manager of the New Product Introduction (NPI) Test Team, you will play a critical role in developing cutting-edge, ATE test solutions for both wafer and package-level tests. Additionally, you will develop reliability test systems to support product qualification. You will be directly responsible for all aspects of the production test development process and ensure timely development and release-to-production of Menlo Micro test solutions. You will work together with a team of test, design, packaging, product and application engineers in both the power and RF product lines. Additionally, you will manage the NPI Product Engineering Manager. In this role you will ensure the product and test engineers are working together to release products through characterization and test capability. New product engineers lead products by partnering with design engineers and work with New Technology Introduction (NTI) regarding yields, failure analysis, characterization and qualification. The product engineers will verify new test programs, communicate and address issues with solutions as the devices are validated to the specifications targeted. You will report to the Vice President of the NPI team and collaborating with various departments throughout the company. You will directly impact critical roadmaps, create new product test solutions and close Phase 4 in our phase gate process to release new products to production. Projects will encompass portions of design, characterization, packaging test, RF, electrical, mechanical, and test considerations, along with data analysis, reliability testing, and root cause problem solving needed to validate the designs created in NPI and launch them into production. This is a management role, however hands-on guidance is required. Key responsibilities include: • Lead and mentor a team of test engineers in developing robust test solutions for MEMS devices, • Define long-term test strategies aligned with product roadmap, manufacturing scalability, and cost targets with support of the test engineers in NTI team, • Drive innovation in test methodologies, automation and infrastructure to improve efficiency, • Oversee the design, development, and implementation of production test programs for wafer probe, final test and reliability-level test, • Insure DFT (Design for Test) strategies are incorporated during product design phase, • Complete validation and track new product test results and use that data to analyze readiness for qualification, • Work cross functionally to solve issues that arise in the design through qualification phase of the products, • Partner with design, NTI and quality teams to optimize test coverage, yield, characterization, capability analysis and time-to-market, • Collaborate with operations, foundries and OSATs to transfer and sustain test programs in high-volume manufacturing, • Drive continuous improvement in test cost, throughput and reliability, • Represent the Test Development organization in executive-level review and customer engagements, • Communicate effectively with colleagues at all levels, leveraging your problem solving, data analysis, and critical thinking skills. * Bachelor's or higher-level degree in electronic engineering, • 12 years' experience with at least 5 in management of a test and product engineering team, • Detailed knowledge of all aspects of ATE Production Test Development including Design-for-Test, Test Plans, HW/SW design, debug, bench correlation, GR&R/Cpk analysis, test time reduction and production release, • Proficiency in ATE software structure and programming of test systems, • Knowledge of precision Analog and mixed signal test methods, • Ability to architect new test systems, • Ability to invent creative new test solutions and methods, • Extensive knowledge of ATE hardware design including schematic capture and physical layout, • Solid understanding of ATE production package-level handler and wafer-level prober environments, • Extensive data analysis knowledge including statistical analysis - repeatability studies, GR&R analysis, Cpk analysis, ANOVA, distribution theory, hypothesis analysis - Guard banding test limits, using Excel data analysis tools for root cause analysis, • Demonstrated sound DOE practices and ability to investigate, determine root cause, and implement appropriate corrective actions using statistical data analysis methods, • Mentor team to carefully plan experiments and tests to validate ideas/theories and what expectations will be, • The ability to work in a multi-disciplinary team environment, including other NPI team members, NTI team, production operation, quality, design, and product engineering, • Excellent communication skills, • Willingness to travel up to 15% of the time, • Must be US person per ITAR regulations, • Desired work location is Irvine, CA. * Industrial experience in MEMS, • Experience with NI PXI test instrumentation, • Experience with LabVIEW and TestSTAND software, • Understanding and experience with JMP!

General Job Description: This position is responsible for independently delivering structural engineering services in support of mechanical, HVAC, and piping systems within ACCO's Design-Build project environment. The Senior Structural Engineer will support projects from conceptual design through construction completion, ensuring structural integrity, code compliance, and constructability of mechanical system installations. This role works closely with project management, construction teams, and other engineering disciplines to develop practical structural solutions that support installation of equipment, ductwork, piping, and related mechanical infrastructure. The position also provides technical leadership and mentorship to engineering staff while contributing to the continued growth of structural engineering capabilities within the organization. Essential Duties & Responsibilities * Expert in project planning, coordination, and execution of structural engineering services within a design-build construction environment. * Independently perform structural design and analysis supporting mechanical systems from conceptual design through construction documentation for large or complex projects. * Design and develop structural solutions for: * Mechanical equipment anchorage * Seismic restraint systems for ductwork, piping, and equipment * Equipment vibration isolation systems * Roof-mounted equipment support systems * Pipe and duct support structures * Supplemental structural steel for equipment and mechanical systems * Structural framing and equipment skids * Prepare structural calculations and PE-stamped installation packages, including supporting documentation and bills of material where required. * Perform structural verification of existing building structures to support equipment replacement, rooftop installations, and retrofit conditions. * Coordinate structural design with: * Project Management teams * Construction and field operations * Mechanical engineering and design teams * VDC/BIM coordination teams * Trade partners and subcontractors * Provide field engineering support, including assistance with installation challenges, troubleshooting structural conditions, and resolving design issues encountered during construction. * Maintain expert-level understanding of applicable building codes, structural design standards, and seismic requirements relevant to mechanical system installations. * Effectively communicate structural design intent and technical requirements to internal teams, project stakeholders, and construction personnel. * Manage time effectively to support multiple projects while meeting design schedules and project deadlines. * Mentor and provide guidance to junior engineers and designers as needed. * Support engineering leadership in identifying opportunities to strengthen structural engineering capabilities within the organization. * Perform other duties as assigned by Manager. Position Requirements: * BS in Structural or Civil Engineering required * Professional Engineer (PE) license strongly preferred * Minimum 8+ years of experience supporting structural design for mechanical equipment, piping systems or building infrastructure is strongly preferred * Strong understanding of structural engineering fundamentals, building codes and structural design standards, seismic restraint systems, equipment anchorage and attachment design and supplemental structural support systems * Proficiency in AutoCAD or Revit, or similar drafting software preferred * Knowledgeable with 3D modeling software to create design and installation packages * Excellent verbal and written communication skills * Able to work independently with limited oversight, as well as part of a highly collaborative team * Strong organizational skills, attention to detail, and the ability to prioritize and multi-task ACCO Competencies: • Proactivity / Initiative: Recognizes what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision., • Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity., • Insight: The ability to gather and make sense of information that suggests new possibilities., • Engagement: Shows a knack for using emotion and logic to communicate a persuasive vision and connect with people., • Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner., • Big Picture: Understands and contributes to organizations' short- and long-term business strategy. On a personal level has independently developed a vision for short- and long-term career success., • Motivation / Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals takes responsibility, and shows personal humility., • Technical Curiosity / Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feed, back; demonstrating an openness to learning and change., • Problem-Solver: Ability to identify, analyze, and solve a problem in support of personal, group, department, or organizational objectives. Physical Requirements: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) • The employee may regularly lift and /or move up to 10 pounds, and occasionally lift and/or move up to 20 pounds., • Specific vision abilities required by this job include Close vision and Distance vision., • The auditory/hearing abilities required by the job include the ability to hear customers calling by telephone., • While performing the duties of this Job, the employee is regularly required to sit for prolonged periods, stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear., • The employee is regularly required to walk and sit. This is a non-exempt position from Monday through Friday. Work hours are as established by the local manager and generally begin and end between 7:00 am to 8:00 am start and 4:00 pm to 5:00 pm end, with one-hour break for lunch and two rest breaks. Eight hours per day is required and other occasional overtime may be necessary per business needs. Competitive Wages: $52 to $81 per hour. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others. The offered wage or salary is only one aspect of an employee's total compensation. #ACCO #LI-AL1

General Job Description: This position will collaborate closely with a dedicated Project Manager, reporting to the Sales Manager, and be responsible for the technical coordination of assigned projects. This includes fostering clear and consistent communication among all disciplines and project team members, including clients, architects, and vendors. This role offers the opportunity to further hone your expertise in estimating, scheduling, and design within our dynamic design-built construction process, leveraging the latest technologies and BIM methodologies. Supervises: None Essential Duties & Responsibilities: Assist the Project Manager with the following: • Writing of proposals, letters, memos, subcontracts, change orders, and other documents related to project execution., • Manage and/or significantly contribute to the development, maintenance, and submission of critical project documents including: RFIs, Submittals, Procurement Logs, Shop Drawings, etc. under the Project Manager's direction., • Coordination of and participation in regular meetings both internal and external (i.e. project kickoff meetings, BIM meetings, schedule meetings, etc.)., • Estimating tasks such as performing takeoffs, soliciting quotes from vendors and subcontractors, compiling complete bid estimates, and developing change order packages., • Management of job progress and quality onsite as required, including leveraging your design and construction expertise in a hands-on capacity to solve emergent operational and installation challenges., • Provide interpretation of technical plans and specifications., • Purchasing processes including vendor and subcontractor buyout, procurement tracking, and delivery of purchased items., • Project financial management responsibilities such as installation tracking, labor forecasting, invoice review, billing development, etc., • Job closeout efforts such as submission of O&Ms, Commissioning, As-Builts, Warranty processing, etc., • Collaborate with the Project Management team to keep them informed on all issues affecting project timeline and budget. Escalate potential problems to the Project Manager to help drive solutions to complete resolution., • Utilize ACCO standard Engineering technologies, provide technical support for the construction effort including participating in the planning and design, interpretation of the design, value engineering and alternate solution reviews, etc., • Develop and maintain viable relationships with our partners outside of ACCO including customers, prime contractors, trade partners, subcontractors, and suppliers., • Foster a strong relationship with ACCO's internal departments (i.e. Construction, Fabrication Shops, Engineering, Accounting, Purchasing, Legal, etc.), • BS in Engineering; Construction Management, or related field. Mechanical and/or related engineering concentration strongly preferred., • Experience and Career Progression: Progression from Project Engineer I to Project Engineer II, III, or a Senior role is based on performance, experience, and demonstrated leadership potential., • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Project), • Proactivity/Initiative: Recognizes and anticipates what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision., • Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity., • Insight: The ability to gather and make sense of information that suggests new possibilities., • Engagement: Shows a knack for using emotion and logic to communicate a persuasive vision and connect with people., • Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner., • Big Picture: Understands and contributes to organizations' short- and long-term business strategy. On a personal level has independently developed a vision for short- and long-term career success., • Motivation/Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals, takes responsibility, and shows personal humility., • Technical Curiosity/Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feedback; demonstrating an openness to learning and change. (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.) • While performing the duties of this job, the employee is regularly required to sit, use hands to operate a computer keyboard and telephone, talk, and listen., • The employee frequently reaches with hands and arms, and at times reaches above shoulder height to access storage cabinets. The employee is occasionally required to stand, walk, climb, or balance, and stoop, kneel, crouch, or crawl (for purposes such as filling photocopiers/printers)., • Specific vision abilities required by this job include close vision and distance vision., • The employee must occasionally lift and/or move up to 10 pounds and occasionally lift and/or move up to 20 pounds., • While performing the duties of this job, the employee is regularly required to sit, use hands to operate a computer keyboard and telephone, talk, and hear., • The employee frequently reaches with hands and arms, and at times reaches above shoulder height to access storage cabinets. The employee is occasionally required to stand, walk, climb, or balance, and stoop, kneel, crouch, or crawl (for purposes such as filling photocopiers/printers)., • Specific vision abilities required by this job include close vision and distance vision. This is a non-exempt position, Monday through Friday. Work hours begin and end between 6:00 am and 5:00 pm, with a one-hour break for lunch and two breaks. Eight hours per day are required, and occasional overtime may be necessary for business needs. Travel: Based on business needs to and from the primary office to regional branch offices & job sites. Varying work in varying locations. Competitive Wages: $38.47 to $57.70 per hour. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others. The offered wage or salary is only one aspect of an employee's total compensation. #ACCO #LI-RN1

Description: American Equipment Holdings, is one of the leading overhead crane solutions providers in the United States. Over the years, our ability to grow and set ourselves apart from the competition is the result of a tried and true philosophy – take care of our customers and take care of our people. We also believe that our people matter, which is why we are committed to providing our team members with competitive wages, attractive benefit offerings, and abundant training offerings. As one of the fastest growing companies in our industry, new opportunities are regularly available that enable our team members to develop, grow, and pursue their career passions. We are looking for a Mobile Crane Inspector for our Anaheim, CA branch. Responsibilities: • Perform on-site preventative maintenance, repairs, and modernizations on electric overhead traveling cranes, • Spend time consulting with customers on repair and safety related issues, • Troubleshoot equipment malfunctions and breakdowns., • Generate sales leads during service calls, • Accurately and neatly document on the service report for the work performed., • New crane wiring, assembly, installation, and start-up., • Maintain a clean and safe work environment., • Strong knowledge of AC/DC theory, as well as the ability to troubleshoot 480VAC 3 phase motor control systems. A.A. degree or Equivalent vocational-training or experience is preferred., • A minimum of 2-year hands-on electro-mechanical maintenance, • Aptitude for both electrical and mechanical environments as well as familiarity with mechanical and electrical equipment, • Willingness to work overtime, • Possession of a valid driver’s license with good driving record, • Must pass drug-screen and background check, • Strong communication skills, • Proven commitment to safety, • Comfort with working at heights, • Experience in Variable Frequency drives and PLC programming a plus, • Crane maintenance or inspection experience required, • 8 hour shift, • Monday to Friday What we offer: We offer competitive compensation and benefits package, including health insurance, retirement plans, and paid time off. • Cigna Health Insurance (Kaiser in CA), • FSA & HSA healthcare employer contribution, • Critical Illness, Accidental, and Hospital Indemnity Plans, • Dental and Vision Plans, • Company paid STD & LTD Disability Insurance, • Educational and Tuition Reimbursement, • Maternity (12-wks) and Paternity leave, • Employee Assistance Program, • Basic & Voluntary Life AD&D, • 4% 401K Employer Match, with 6% of your Contribution, • Company Paid Time Off (PTO), • Company provided PPE, • Discounts on products and services Our Commitment to Inclusion & Belonging: At American Equipment Holdings, we are dedicated to engaging with the widest possible range of talent. We believe that diverse perspectives drive innovation and engagement, enabling us to attract creative individuals and develop exceptional products, services, and solutions. We encourage all qualified candidates to apply. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Proof of right to lawfully work in the United States required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Requirements: Compensation details: 40-50 Hourly Wage PI0ec252cebf48-37820-40487480

Description: American Equipment Holdings is an organization of leading overhead crane and hoist fabricators, distributors and field service providers, including American Equipment, Allied Crane, Eastern Crane & Hoist, Facilities Engineering, Kistler Crane & Hoist, Pacific Crane & Hoist, Patriot Crane & Hoist, Shannahan Crane & Hoist, and Washington Crane & Hoist. The consolidated entity is one of the largest independently owned overhead crane and hoist solutions providers in the country, serving over 4,000 customers nationwide. Together, American Equipment Holdings companies provide comprehensive solutions for everything related to customers’ overhead crane and hoist needs, including OSHA mandated inspections, preventative maintenance and repair field services, parts, engineering, ISO certified fabrication, new and replacement equipment, automated systems, system modernizations and training. We are looking for a Field Install Technician (Ironworker) in our Anaheim location. Essential Duties and Responsibilities: • Work as part of team to install equipment. With a focus on safety and customer service., • Accurately and neatly document work performed using a combination of electronic forms, software applications, and traditional handwritten reports where required., • Maintain a clean and safe work environment., • Iron work/steel erection experience., • Aptitude for either electrical or mechanical environments as well as familiarity with mechanical and electrical equipment, • Comfort with working at heights, • Welding experience- Wire Feed (MIG), Stick (SMAW), • Hands-on electro-mechanical maintenance or equivalent military experience a plus, • Competence in equipment operation. Reach forklifts, scissor lifts., • Ability to read blueprints and schematics, • Ability to work well in a team environment., • Strong communication skills, • Proven commitment to safety, • Passion for doing things right the first time., • Industry certifications including equipment operator, Welding, Rigging will be a plus., • Willingness to work overtime is required, • Possession of a valid driver’s license with good driving record American Equipment Holdings represents the industry’s leading manufacturers such as Detroit Hoist, Columbus McKinnon, ACCO, R&M, Demag, Gorbel, Spanco, IMS, Harrington, Conductix, Magnetek & PE, among others and customers rely on its design, engineering, fabrication and installation capabilities to meet their unique application needs. American Equipment Holdings serves local, regional and national customers across a variety of end markets, including light & heavy industrial, automotive, mining, public utilities, military, aerospace & defense and energy, among others. For more information, visit . Proof of right to lawfully work in the United States required. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Requirements: Compensation details: 24-32 Hourly Wage PId385506d5462-37820-40487359

• Job Identification 117199, • Job Category Operations, • Posting Date 04/21/2026, 04:41 PM, • Locations 801 S Placienta Ave, Fullerton, CA, 92831, US 800 S State College, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time, • Remote Work Schedule Availability? None The person in this position will be part of the Machine building team that is responsible for design and manufacturing of new and rebuilt machines to support HFS facilities worldwide. This group is responsible for the implementation of projects to upgrade existing equipment and systems, coordinates and supports custom machine building projects and assists in the selection, procurement and installation of our new custom equipment to support HFS manufacturing process. Essential Duties and Responsibilities: • Design, develop, manage and maintain control systems (i.e. Distributed Control System, Programmable Logic Controller). Perform all work and conduct oneself in a manner that promotes safety of the individual and all other employees., • Troubleshoot, make necessary repairs or upgrades, and perform preventative maintenance and service to process control equipment, control systems, equipment calibration, and instrumentation equipment to provide for the reliable operation of this equipment. Investigate problems, analyze for root causes, and derive resolutions., • Collaborate with engineers, purchasers and other staff members involved in the production processes including reviewing instrumentation and control related documents to mechanical, electrical and process equipment technical specifications and vendor drawings of equipment and prepare comments and recommendations., • Participate in installation and startup and commissioning activities to assist personnel in systems checkout and commissioning, including any control system programming modifications, coordinating with the control system suppliers and coordinating resolution to problems within other disciplines., • Ensure that the instruments and controls comply with all internal and external health and safety regulations and requirements., • Develop best practices to improve production capacity, quality, and reliability., • 3+ years manufacturing related experience and/or training, or equivalent combination of education and experience., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • Experience in automation and or fabrication Preferred Qualifications: • Bachelor's degree preferred., • Prefer a Bachelor's Degree in Electrical Engineering, Industrial Engineering, or Mechanical Engineering, from an accredited institution., • Minimum of (3) years of experience with control systems (i.e. Distributed Control System, Programmable Logic Controller); Allen Bradley PLC's and Siemens HMI's (touch panel, IPC)., • Basic understanding of electrical and mechanical systems, including hydraulic, pneumatic, and control systems., • Experience with industrial robots (e.g., Fanuc) and Vision systems., • Experience of electrical design with the ability to read, write and design using AutoCAD and or SolidWorks electrical software., • Experience troubleshooting, repairing, and performing preventative maintenance and service to industrial process control equipment., • Work with and train technicians on proper wiring connections, basic programming, and basic system protocols., • Ability to effectively present information and respond to questions from groups of managers, employees, and vendors., • Strong written and verbal communication skills. Benefits/Salary: The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $95,000 to $125,000. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email ___ , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

Propulsion Engineer - Cutting Edge Space & Defense Products! This Jobot Job is hosted by: Stephen Brainerd Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $60 - $125 per hour A bit about us: With numerous offices across the country we are an industry leading Space Development company. We specialize in the design, manufacture, integration, and test of critical spacecraft components. We are a team of accomplished engineers and operations personnel with a diverse range of critical skills, decades of mission experience, and a passion to develop unique component solutions for space applications. If you are an experienced Mechanical / Propulsion Engineer looking to develop cutting edge products, then please apply! Why join us? Do you want to work with some of the nation’s best Clients like NASA and Boeing? We do too! • Meaningful Work!, • Best in Class Firm!, • Gold Level PPO Heath Insurance - 75% Covered!, • Competitive Compensation Package!, • Benefits Package!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details Responsibilities: As a Mechanical Propulsion Engineer, your responsibilities will include: 1. Leading the technical development for mechanical subsystems, including propulsion., 2. Providing propulsion subsystem technical expertise and guidance to the engineering team., 3. Performing technical risk assessment and mitigation for space-based mechanical and propulsion subsystems., 4. Working closely with other engineers and scientists to design, analyze, and test propulsion systems., 5. Using mechanical design and analysis tools to create effective and efficient propulsion systems., 6. Collaborating with cross-functional teams to ensure the successful integration of propulsion subsystems into the spacecraft., 7. Staying updated on the latest advancements and trends in propulsion technology and incorporating them into our systems where applicable., 8. Documenting all stages of the design and development process for future reference and improvement. Qualifications: To be considered for the role of Propulsion Engineer, you must possess the following qualifications: 1. A Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related field. A Master's degree or higher is preferred., 2. A minimum of 7 years of experience in propulsion engineering or a related field., 3. Demonstrated experience providing propulsion subsystem technical expertise., 4. Proficiency with mechanical design and analysis tools., 5. A solid understanding of Geometric Dimensioning and Tolerancing (GD&T)., 6. Excellent problem-solving skills and the ability to think critically and creatively., 7. Strong communication and teamwork skills, with the ability to work effectively in a collaborative environment., 8. A passion for space exploration and a commitment to contributing to the future of the space industry. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

This Jobot Job is hosted by: Amber Wood Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $150,000 per year A bit about us: Our services include construction management, fabrication, erection, mechanical installation, and plant maintenance for heavy industrial, commercial, and roadway projects, as well as a full spectrum of golf course construction and management services. Why join us? Medical Insurance HSA with Employer contributions Dental Insurance Vision Insurance Universal Life and Long-term Care Insurance Group and Voluntary Life Insurance Short Term/Long Term Disability Critical Illness Plan Employee Assistance Program Paid Vacation Paid Holidays 401(k) with Employer Match Job Details Senior/Lead Piping Engineer – EPC Projects (Metals Sector) We are seeking a highly experienced Senior/Lead Piping Engineer with a strong background in large-scale EPC (Engineering, Procurement & Construction) projects within the metals and minerals sector. The successful candidate will provide technical leadership and oversight of piping design and execution for complex industrial plants, including smelters, refineries, and processing facilities. Key Responsibilities • Lead piping design, layout, and execution throughout all EPC phases (FEED, detailed design, procurement, construction, commissioning)., • Oversee development of 3D models, piping layouts, isometrics, and material specifications., • Conduct and review stress analysis and flexibility studies in compliance with ASME, ANSI, ISO, and other applicable codes., • Approve Material Take-Offs (MTOs), technical requisitions, and vendor documents., • Manage subcontractors and coordinate with process, mechanical, structural, and procurement teams., • Provide technical guidance during construction, hydrotesting, and commissioning., • Act as the primary technical interface with clients and stakeholders, resolving complex piping issues., • Bachelor’s degree in Mechanical or Piping Engineering (Master’s preferred)., • 15+ years’ experience in piping design/engineering, with at least 8 years in EPC projects for metals/mining/heavy industrial facilities., • Expertise in PDMS, SP3D, CAESAR II, AutoPIPE, or equivalent software., • Deep knowledge of international piping codes and standards (ASME, ANSI, API, ISO, etc.)., • Strong leadership, communication, and project management skills. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Revelyst, is a collective of makers who design and manufacture performance gear and precision technologies. Our category-defining brands leverage meticulous craftsmanship and cross-collaboration to pursue innovation and redefine what is humanly possible in the outdoors. As a Sr. Helmets Engineer for the Hardgoods category you'll use your exceptional skills and knowledge of products and processes to bring innovative designs to market. Your focus will be to develop quality, on-time, and cost-efficient products that are an accurate reflection of the Revelyst Adventure Sports brands (Fox/Bell/Giro) as industry leaders. This position reports to the Sr. Engineering Manager and is located in our Irvine, CA office. As the Sr. Helmets Engineer, you will have an opportunity to: • Strive to create the most innovative and market leading hardgoods products possible. Products will be evaluated for success using the following criteria: Innovation, function, fit, comfort, relevance to brand identity, technology utilization, quality, aesthetics, timely completion, manufacturability and realized margins., • Closely work with Marketing and Design as a team to brainstorm innovative market leading ideas and concepts., • Prepare and present project information to the Design and Marketing teams for review and decision making., • Review and prioritize performance and style to properly incorporate them into products. Visualize performance and styling goals and create solutions to achieve them., • Perform CAD work both internally and with Vendor as appropriate from concept through production., • Working with Design and the vendor, create and evaluate functional prototypes to verify design intent., • Create and maintain project documentation such as 3D CAD files, engineering drawings, spec sheets, bill of materials, project schedules, etc., • Manage project scope and schedule to meet project deliverables and deadlines., • Develop cost analysis of design proposals, assist with vendor quotations, track project costs to meet product design goals under the guidance of a manager., • Deeply understand applicable safety and/or test standards and evaluate designs and solutions to meet them., • Visit vendor’s manufacturing facilities to sample and commercialize intended product design. Study vendor’s development techniques, production processes and technological capabilities to enhance professional knowledge, further vendor relationship and assist in the innovation of product design/development, • Communicate internally and with international factories and vendors; both verbally and in writing critical and pertinent information that is needed in the development process., • Research and evaluate new materials, manufacturing processes and trends that may be used for product innovation., • Help build and maintain comprehensive materials and trims library. You have: • 4-year degree in Mechanical Engineering (BSME) or equivalent work experience, • 5-8 years minimum consumer product development/engineering experience., • An enthusiastic and positive attitude with a passion towards MX, MTB and Action Sports. Must be very creative, forward thinking, an energy giver - not a taker., • CAD experience, preferably proficient in Solidworks., • Experience engineering injection molds, working with plastic parts and 3D modeling, • Knowledge of plastics, textiles, and embellishment techniques

Job Description Seeking CNC Machinist to build prototype and low volume production of precision aerospace components. In this position, you will be responsible for both machine programming and machining operations including developing and building the required tooling. You should be able to operate independently with minimal direction/supervision in a fast-paced, dynamic, highly technical environment. You should also be able to work collaboratively with the engineering team. You should also be comfortable working in a start-up environment. This job offers opportunity for growth and personal development. Our ideal applicant has a high school diploma or GED and 5+ years experience in a shop environment with 2+ years on CNC vertical machining centers. Experience in CNC programming using Fusion 360. Preferrable experience with Haas CNCs. Duties and Responsibilities • Develop CNC programs in Fusion 360, • Devise machining approach including any tooling necessary., • Operate and manages CNC and other precision machining equipment., • Maintain a safe and clean work environment., • Develop and implement mechanical maintenance plans to prevent costly equipment breakdowns. Document processes and maintain mechanical service records., • Troubleshooting mechanical malfunctions and breakdowns and perform repairs when able., • High school degree or equivalent., • Knowledge of CNC Vertical Machining Centers (preferably Haas)., • Knowledge of CNC programming with Fusion 360., • Sound organizational and time management skills., • Willingness to perform duties outside of business hours when necessary., • Comfortable in a dynamic environment. Able to work effectively work autonomously or within a team environment., • Good interpersonal and communication skills (verbal and written).Company DescriptionWe provide products and services for electro-optical systems, directed energy, unmanned aerial systems, and test systems within military and commercial markets. We deliver solutions leveraging precision control systems, image processing, GN&C, electronics design, modeling & simulation and embedded real time software. From High Energy Laser weapons, to visual perception modules, to threat warning systems to aircraft autopilots, Adsys Controls provides state of the art solutions for sensing, controls and autonomy.We provide products and services for electro-optical systems, directed energy, unmanned aerial systems, and test systems within military and commercial markets. We deliver solutions leveraging precision control systems, image processing, GN&C, electronics design, modeling & simulation and embedded real time software. From High Energy Laser weapons, to visual perception modules, to threat warning systems to aircraft autopilots, Adsys Controls provides state of the art solutions for sensing, controls and autonomy.

Job Description The laborer performs tasks involving physical labor for construction projects in the major technical trades. This position may operate hand and power tools. This position will also be responsible to clean and prepare job sites, dig trenches, and clean up rubble and debris. The specific on-site tasks are related to the needs and duties of each project. Apply if you: • Bring a cooperative spirit to your team and neighboring department., • Have an understanding that through your contributions, you aid in the overall Company’s success., • Pursue continuous efforts to see beyond current business modes and methods., • Embody an understanding that as a committed team member, tenure with an organization is achievable., • Bring your whole self to work. Applying your knowledge, skills, and abilities ensures that every task you perform is performed at the highest level. Cirks Construction Inc. (CCI), dba KDC Construction is a leader in the construction industry with diverse individuals dedicated to our people, customers, projects, and community. We are maintaining a strong focus on building a culture that encourages our employees to grow personally and professionally. KDC is also a proud recipient of the Top Workplaces 2023, presented by the Orange County Register. KDC offers a competitive salary/hourly range $20.00 to $24.00 - while considering the candidate’s experience and a comprehensive benefits package for full-time employees: • Medical insurance, • Dental HMO and PPO insurance, • Vision insurance, • Life/AD&D insurance, • Flexible Spending Accounts – Unreimbursed Medical and Dependent Care, • 401(k) retirement plan, • Vacation and Sick Time, • Holidays Competencies • Adaptability, • Concern for Safety, • Ensuring Accountability, • Exemplifying Integrity, • Managing Resources, • Planning and Organizing, • Problem Solving, • Resilience, • Teamwork Essential Job Functions • Assists with technical tasks in trades including plumbing, electrical, concrete, flooring, roofing, painting, framing, drywall, and finishing skills for doors, windows, and cabinetry., • Assists with the installation of fixtures including windows, roofing, flooring, trim, tile, ceiling tile, hardware, HVAC, and switchbox., • Assists with performing framing tasks including wood/metal, drywall, fiberglass reinforced plastic, and T-Bar., • Operates and maintains tools and equipment including (but not limited to): drills, saws, nail guns, hammers, and shovels., • Responsible to execute tasks involving physical labor, as needed., • Travels to work sites to complete required tasks and projects., • Projects may require response to 24/7 emergency coverage., • Maintains a clean job site to eliminate possible hazards., • Ensures proper safety rules, regulations, and incident reporting are followed. Organizes building material; loads and unloads trucks., • Responsible to assist workers on construction and preconstruction assignments., • Reads instructions, specifications, and/or plans to determine work activities. Responsible for working safely adhering to all aspects of our Health, Safety and Environmental Program both for self-protection and for protection of co-workers, subcontractors, the public and customer representatives., • Other duties as assigned. Education, Experience and Skills • Knowledge of general trades: plumbing, electrical, concrete, flooring, roofing, painting, framing, drywall, and finishing skills for doors, windows, and cabinetry., • High school diploma or equivalent., • Possesses tools required to perform job function., • Organized and dependable team player with strong communication skills. Professional and results driven., • Friendly and positive attitude towards change., • Able to identify a need, remove the barriers, and has the know-how to make things happen., • Values diversity of ideas, opinions, and people. Has common sense and applied logic., • Must possess (or be able to obtain) appropriate state driver license prior to employment, along with a clean driving record and reliable transportation. Are you ready to invest in your future at KDC? Company DescriptionFounded in 1996, KDC Construction offers commercial construction services in California and neighboring states in various market segments. Our diverse team of professional project managers and superintendents brings extensive knowledge and leadership to each project while exceeding customer expectations. KDC has longstanding relationships with pre-qualified subcontractors and suppliers from wide-ranging disciplines. From original plans through completion, KDC Construction provides dedicated service in estimating, pre-construction, scheduling, budgeting, procurement, warehousing, and field management. We have the unique capability to self-perform fast track projects with contractor licenses in General Building, General Engineering, Mechanical, and Plumbing; employing expert craftsmen from numerous trades.Founded in 1996, KDC Construction offers commercial construction services in California and neighboring states in various market segments. Our diverse team of professional project managers and superintendents brings extensive knowledge and leadership to each project while exceeding customer expectations. KDC has longstanding relationships with pre-qualified subcontractors and suppliers from wide-ranging disciplines.\r\n\r\nFrom original plans through completion, KDC Construction provides dedicated service in estimating, pre-construction, scheduling, budgeting, procurement, warehousing, and field management. We have the unique capability to self-perform fast track projects with contractor licenses in General Building, General Engineering, Mechanical, and Plumbing; employing expert craftsmen from numerous trades.

As a Manufacturing Engineer III, you will be responsible for leading the design, development, and optimization of manufacturing processes. This role ensures products are manufactured safely, efficiently, and in compliance with regulatory standards and qualify management system requirements. Manufacturing Engineer III applies continuous improvement methodologies such as lean manufacturing to enhance manufacturing quality, reliability, and cost-effectiveness of Bio-Rad products. Manages a variety of professional engineering assignments associated with all areas of existing and future manufacturing activities and various phases of specialized engineering projects. This role provides technical expertise and support of manufacturing processes, sustaining product design, and new product transfers. Location: This position must be based in Irvine, California and requires the employee to be located within commuting distance of the office. How You'll Make An Impact: • Continuous improvement projects to increase capacity and reduce COGs., • Sustaining support to ensure adherence to MPS., • Equipment and Fixture development for EH&S and improved capacity., • Management of QMS systems, including updates to procedures and Wis., • Bachelor's or Master's degree in engineer/scientific field, preferably in manufacturing, mechanical, industrial, or automation., • At least 7 years of industry experience, preferably in medical device manufacturing. Past experience in packaging or manual assembly line processes is a plus., • Strong documentation skills and awareness, understanding that regulations require a higher standard of documentation and GDP., • Problem solving skills that help in investigating product issues, but also being able to assess a situation and come up with a root cause and solution that fixes the actual root problem., • Ability to conceptualize, design, fabricate or procure the right materials for fabrication or work with a supplier to fabricate, test, qualify, and release CapEx equipment and fixtures., • Experience with an ERP system, preferably SAP. Benefits: We're proud to offer a variety of options, including competitive medical plans for you and your family, free HSA funds, a new fertility offering with stipend, group life and disability, paid parental leave, 401k plus profit sharing, an employee stock purchase program, a new upgraded and streamlined mental health platform, extensive learning and development opportunities, education benefits, student debt relief program, pet insurance, wellness challenges and support, paid time off, Employee Resource Groups (ERG's), and more! Compensation: The estimated base salary range for this position is $121,200 - $166,700 at the time of posting. Actual compensation will be provided in writing at the time of offer, if applicable, and is based on several factors we believe fairly and accurately impact compensation, including geographic location, experience, knowledge, skills, abilities, and other job permitted factors. This position is also eligible for a variable annual bonus, which is dependent upon achievement of your individual objectives and Company performance. Who We Are: For 70 years, Bio-Rad has focused on advancing the discovery process and transforming the fields of science and healthcare. As one of the top five life science companies, we are a global leader in developing, manufacturing, and marketing a broad range of high-quality research and clinical diagnostic products. We help people everywhere live longer, healthier lives. Bio-Rad offers a unique employee experience with collaborative teams that span the globe. Here, you are supported by leadership to build your career and are empowered to drive change that makes an impact you can see. EEO Statement: Bio-Rad is an Equal Employment Opportunity/Affirmative Action employer, and we welcome candidates of all backgrounds. Veterans, people with physical or mental disabilities, and people of all race, color, sex, sexual orientation, gender identity, religion, national origin and citizenship status are encouraged to apply. Agency Non-Solicitation: Bio-Rad does not accept agency resumes, unless the agency has been authorized by a Bio-Rad Recruiting Representative. Please do not submit resumes unless authorized to do so. Bio-Rad will not pay for any fees related to unsolicited resumes. Fraud Alert: Bio-Rad has received reports of individuals posing as Bio-Rad recruiters to obtain information, including personal and financial, from applicants. Beware of these fake "recruiters" and job scams. ___ for more information on this scam and how to avoid it. #LI-KD2 Legal Entity: (USA_1000)Bio-Rad Laboratories, Inc.

As a Maintenance Technician IV, your primary responsibility will be maintaining and repairing production equipment ranging from high speed packaging and filling lines to specialized processing mixers and pumps. You will be a member of a team responsible for keeping production equipment operating with minimum downtime.Working within a highly regulated medical device manufacturing facility, you will adhere to structured SOPs in place that govern activites under an established Quality Management System. Work performed will support validated systems and processes and will be documented following cGMP principles. The production environment operates on a 24hr schedule and this role will carry "On Call" duties for late and off-shift equipment emergencies.The Maintenance Mechanic IV role is senior-level and carries leadership responsibilities. You will be expected to be an example to your peers while ensuring preventive maintenance and priority repair activities are completed timely within the department. You will assist management with special tasks that arise including: Kaizen, spare parts inventory management, and capital improvement initiatives. Working with minimal supervision, you will partner with other departments such as Engineering, Production, and Facilities to ensure priorities within the site are addressed and completed successfully. Location: This position must be based in Irvine, California and requires the employee to be located within commuting distance of the office. How You'll Make An Impact: • Performs scheduled equipment preventive maintenance (PM) tasks, completes all required documentation thrououghly and accurately. Manages open work orders within the CMMS to ensure all maintenance tasks are completed on time. Ensures all department KPIs are maintained to established goals., • Responsible for maintaining cGMP-compliant documentation in adherence to the Qualtiy Management System., • Assists in Capital Improvement Projects with coordinating contractors, prepping areas, and supporting normal business activities., • Leads by example to the other Maintenance Associates and fosters teamwork and knowledge sharing within the department to expand the overall capabilities of the team., • High School diploma or equivalent required. A technical 2 or 4yr degree is preferred., • 6+ years working in equipment maintenance or Associate degree with 5+ years experience preferred., • 4+ years working in a GMP environment with experience working in facilities/plant maintenance organization preferred., • Understanding of pneumatics, boilers, validated systems, and standby electrical generation systems is preferred., • Basic understanding of electrical systems and safety is required. Knowledge of mechanical systems, high-speed conveyance, and automated lines is preferred., • Knowledge of general shop tools and methodologies is required. Experience with RODI water generation systems and aseptic processing is preferred. Benefits: We're proud to offer a variety of options, including competitive medical plans for you and your family, free HSA funds, a new fertility offering with stipend, group life and disability, paid parental leave, 401k plus profit sharing, an employee stock purchase program, a new upgraded and streamlined mental health platform, extensive learning and development opportunities, education benefits, student debt relief program, pet insurance, wellness challenges and support, paid time off, Employee Resource Groups (ERG's), and more! Compensation: The estimated hourly rate for this position is $39.00 to $53.27 at the time of posting. Actual compensation will be provided in writing at the time of offer, if applicable, and is based on several factors we believe fairly and accurately impact compensation, including geographic location, experience, knowledge, skills, abilities, and other job permitted factors. This position is eligible for a variable annual bonus, which is dependent upon achievement of your individual objectives and Company performance. Who We Are: For 70 years, Bio-Rad has focused on advancing the discovery process and transforming the fields of science and healthcare. As one of the top five life science companies, we are a global leader in developing, manufacturing, and marketing a broad range of high-quality research and clinical diagnostic products. We help people everywhere live longer, healthier lives. Bio-Rad offers a unique employee experience with collaborative teams that span the globe. Here, you are supported by leadership to build your career and are empowered to drive change that makes an impact you can see. EEO Statement: Bio-Rad is an Equal Employment Opportunity/Affirmative Action employer, and we welcome candidates of all backgrounds. Veterans, people with physical or mental disabilities, and people of all race, color, sex, sexual orientation, gender identity, religion, national origin and citizenship status are encouraged to apply. Agency Non-Solicitation:Bio-Rad does not accept agency resumes, unless the agency has been authorized by a Bio-Rad Recruiting Representative. Please do not submit resumes unless authorized to do so. Bio-Rad will not pay for any fees related to unsolicited resumes. Fraud Alert: Bio-Rad has received reports of individuals posing as Bio-Rad recruiters to obtain information, including personal and financial, from applicants. Beware of these fake "recruiters" and job scams. ___ for more information on this scam and how to avoid it. #LI-PB1 Legal Entity: (USA_1000)Bio-Rad Laboratories, Inc.

General Job Description: The Project Manager is expected to develop and maintain a client base, manage HVAC/plumbing/process sales, and coordinate the field labor needs for each project in conjunction with field leadership. The Project Manager will use judgment and discretion in representing the company. They are expected to show a high level of commitment and involvement with their work and the company's business. Supervises: None Essential Duties & Responsibilities: Project Management • The Project Manager is the single-source responsibility to ACCO and the customer., • Perform all project management functions required to promote and finalize sales, including concept engineering, complete estimates, written proposals, meetings, leading to successful job completion., • Successful management of contracts, including sales, estimating, procurement, and execution., • Forecasting, prepare budget projections and control costs within agreed upon limits., • Provide letters, proposals, memos, contracts, change orders, and strategies for good business procedures and legal protection., • External Client Relations - Leadership of client meetings and the development of contracts to finalize sales. Maintain cordial relationships with all clients, including vendors, subcontractors and the industry., • Internal Team Coordination - Provide project coordination, leadership and guidance of all ACCO departmental efforts including Engineering, Purchasing, Accounting, Construction and Service during project construction in a timely manner., • Consult with appropriate ACCO personnel including all Management and Department Heads., • Attend all ACCO Project Management Sales and Construction Meetings., • The Project Manager utilizes and coordinates staff from all departments, as needed, for each project. During the life of a project, the Project Manager provides project leadership and coordinates employees assigned to the project by department supervisors to achieve the project vision and contracted scope associated with the customer requirements., • Mentoring - Act as a mentor to others assigned by your supervisor and actively participate in recruiting, training, and coaching of sales staff to support department initiatives and growth., • BS in Mechanical Engineering or related field (preferred)., • 5+ years of experience in estimating, design, and/or management of HVAC projects from $50,000 to $25+ million., • Ability to operate independently and autonomously to facilitate goals outlined by your supervisor., • Demonstrate a corresponding high sense of integrity., • Demonstrated experience/ability to develop new business., • Strong interpersonal and project management abilities, employing strong organizational skills to respond successfully to a high volume of issues., • Maintain a community presence in an industry-based or community-based organization., • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Project), • Proactivity/Initiative: Recognizes what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision., • Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity., • Insight: The ability to gather and make sense of information that suggests new possibilities., • Engagement: Shows a knack for using emotion and logic to communicate a persuasive vision and connect with people., • Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner., • Big Picture: Understands and contributes to organizations' short- and long-term business strategy. On a personal level has independently developed a vision for short- and long-term career success., • Motivation/Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals takes responsibility and shows personal humility., • Technical Curiosity/Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feedback; demonstrating an openness to learning and change. (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) • The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this job include close vision and distance vision., • While performing the duties of this Job, the employee is regularly required to talk or hear., • The employee is frequently required to stand; walk; sit and use hands to finger, handle, or feel., • The employee is occasionally required to reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl, especially when conducting job site walks., • Must possess & maintain a valid Class C driver's license and have the ability to drive a vehicle. Travel: Based on business needs to and from the primary office to regional branch offices & job sites. Varying work in varying locations. Competitive Wages: $110,520 to $147,360 Annual Salary. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others. The offered wage or salary is only one aspect of an employee's total compensation. #ACCO #LI-RN1

• Job Identification 116949, • Job Category Quality, • Posting Date 04/08/2026, 12:00 AM, • Locations 1425 Acacia Ave, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time The Quality Engineer will perform all the required inspections on product to assure compliance to CAM's Quality System, Specifications and Customer requirements for Industrial and Military/Aerospace products. The Quality Engineer is responsible for monitoring and improving the quality of our operational processes and outputs. The Quality Engineer's responsibilities include designing quality standards, developing quality control systems, determining corrective actions, planning, and conducting activities concerned with the quality assurance of industrial processes, materials, and products. This position is a key liaison with internal staff, suppliers, and customers on Quality related matters. Key Responsibilities: ' Maintaining the AS9100 Quality Management System. ' Supports customer, AS9100, and NADCAP audits. ' Conducting internal audits and identifying areas for improvement. ' Understanding customer demands and expectations of products and services. ' Develops training documentation for specific processes in compliance with customer and quality requirements. ' Participating in design reviews, risk management, continuous improvement, approval of routers for new products, contract review, and PPAP activities. ' Creating and enforcing quality standards, procedures, and policies. ' Working closely with all departments/functions to develop procedures/work instructions for new processes, identify improvement and training needs, and develop performance goals. ' Communicates significant issues or developments identified during quality assurance activities and provides recommended process improvements to management. ' 'Manage Root Cause & Corrective Action process for external and internal customer complaints: o Develops new approaches to solve problems identified during quality assurance activities. Interfaces and assists with supply chain development and initiatives; evaluate supplier performance; maintain suppliers' qualifications up to date. Benefits/Salary: The position includes competitive wages, with a targeted range of $85,000-95,000, and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. , Basic Qualifications: ' Bachelor's degree in engineering in mechanical, industrial, or manufacturing engineering. ' 3 years of experience in the quality field, aerospace industry preferred. ' Knowledge of lean manufacturing basics and AS9100 quality system requirement. ' Working Knowledge of problem-solving tools. ' Experience in blueprint reading. ' PPAP and AS9102 experience. ' Strong organization and planning skills. ' Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. Preferred Qualifications: ASQ CQE certified. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

P2S stands as a provider of professional engineering services to a broad range of markets, including higher education, healthcare, ports/harbors, industrial, entertainment, commercial, laboratories, municipal, and federal sectors. Our specialties include electrical, mechanical, plumbing, fire protection, and technology integration. Our offered services range from engineering and commissioning to construction management. With over 300 dedicated employees, P2S is an internationally recognized leader in many of the key markets we serve. We provide a blend of innovation and technical excellence in delivering green solutions that enhance and sustain the built, natural, and social environments. Currently, we have offices in Long Beach, Seattle, Irvine, San Diego, Los Angeles, and San Jose. Are you a student majoring in Electrical Engineering and looking for Summer Internship opportunities? P2S is an award-winning engineering firm named "Best Place to Work" for the past 15 years. Schedule: In Office M-F Hourly: $24.00 Undergraduate / $26.00 Graduate Level: Intern Location: Long Beach, CA, Irvine, CA, San Diego, CA, and Seattle, WA Internship Program The internship program aims to offer a positive work/training experience aligned with career goals and education level. Interns will be part of the Electrical Engineering team, gaining hands-on experience in office and field settings and actively contributing to client projects. The program emphasizes real-world industry exposure, including visits to project sites and internal training opportunities, fostering a unique learning experience and encouraging participation in company events. Schedule The Summer Internship lasts 10-12 weeks, starting in June and ending in August - September, depending on the candidate's availability. Responsibilities Project Support: • Assist the engineering team in the execution of ongoing projects., • Conduct research and analysis to contribute to project development., • Collaborate with team members to meet project deadlines. Design and Prototyping: • Contribute to the design process by creating and modifying engineering drawings., • Assist in conducting tests to ensure the functionality and reliability of engineering solutions., • Work closely with quality assurance teams to identify and address potential issues. Documentation: • Maintain accurate and up-to-date project documentation., • Generate reports and summaries to communicate project progress. Collaboration: • Collaborate with cross-functional teams to ensure alignment with project goals., • Engage in training sessions and workshops to enhance technical skills., • Seek opportunities for continuous learning and development within the engineering field. Requirements: *Currently enrolled in an accredited university majoring in Electrical Engineering. *Training in Revit and/or AutoCAD is a plus *FE/EIT is a plus *Trained to utilize CAD/BIM standards *Ability to work effectively in a highly energetic and multiple-engagement environment, dedication to teamwork, a strong work initiative, and the ability to adapt to new challenges and ideas; detail-oriented Benefits: *Hands-on experience in a cutting-edge engineering environment. *Mentorship from experienced professionals in the field. *Networking opportunities with industry leaders. *Exposure to real-world engineering challenges. #LI-Onsite What sets P2S apart? For 15 years in a row, P2S has been regarded as a "Best Place to Work" by our employees. Why? Because we value satisfied employees just as much as satisfied clients. With competitive benefits, flexible work schedules, paid training/professional memberships, and more. - we aim to attract the best talent and keep them here Learn more about what it means to work at P2S: ___ P2S is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. About Legence ___ (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. Benefits Upon eligibility, some of the benefits offered include: • Paid Sick Leave Employment Eligibility Candidates must have current work authorization in the U.S.; visa sponsorship is not available for this position. Third-Party Recruiting Disclaimer Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. Pay Disclosure & Considerations Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. Equal Employment Opportunity Employer Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations.

P2S stands as a provider of professional engineering services to a broad range of markets, including higher education, healthcare, ports/harbors, industrial, entertainment, commercial, laboratories, municipal, and federal sectors. Our specialties include electrical, mechanical, plumbing, fire protection, and technology integration. Our offered services range from engineering and commissioning to construction management. With over 300 dedicated employees, P2S is an internationally recognized leader in many of the key markets we serve. We provide a blend of innovation and technical excellence in delivering green solutions that enhance and sustain the built, natural, and social environments. Currently, we have offices in Long Beach, Seattle, Irvine, San Diego, Los Angeles, and San Jose. Are you an Electrical Engineer with 5-10 years of experience looking to grow your career? Join our award-winning team. Recognized as a Best Place to Work for over a decade, P2S offers a collaborative, innovative environment where your contributions make a real impact. We have an open position for a mid-level Electrical Engineer-you could be a perfect fit. If you meet the qualifications below, we encourage you to apply today. Employment Type: Full-time Hybrid Schedule: 3 days In-office / 2 Remote Salary: $120,000 - 175,000 (dependent on experience) Level: Mid Office: Long Beach CA, Irvine CA As an Electrical Engineer, you will support both predesign and design phases on small to mediumsized projects, which may include a mix of commercial and institutional buildings or be dedicated exclusively to healthcare facilities. Job Requirements: Technical • Degree: Bachelor's or Master's degree in Electrical Engineering, • Registered Professional Engineer License required, • 5-10 years' experience preferred, • Demonstrated ability to lead electrical design projects, • Demonstrate project management skills., • Experience using NEC, AutoCAD, ETAP/SKM, and Revit required Non-Technical: • Experience mentoring emerging professionals and guiding them through technical challenges, • Demonstrated ability to improve processes, elevate team performance, and implement sustainable, high-impact solutions, • Open to giving and receiving constructive feedback to foster continuous learning and collaboration, • Prioritizes team goals over personal recognition and consistently builds lasting relationships grounded in trust, accountability, and mutual respect, • Self-motivated, inquisitive, and detail-oriented; comfortable solving complex problems in a fast-paced, collaborative environment, • Strong organizational skills with a focus on reliability and responsiveness Job Duties: Pre-Design Engineering • Perform field surveys for the design of electrical systems, gather information, and prepare site assessment reports., • Prepare electrical schematic designs. Design Engineering • Design power single line and riser diagrams, • Perform electrical calculations (arc flash, coordination, short circuit, voltage drop, load flow) using ETAP/SKM., • Design low-voltage and medium-voltage infrastructure., • Design for electrical equipment (substation, switchboard, transformer, panelboard) replacement projects., • Understand and utilize CAD/BIM standards., • Have a working knowledge of National Electrical Code, Washington Codes and Energy Standards to design electrical systems., • Coordination among different disciplines, such as mechanical, plumbing, telecom, civil, structural, and architectural. Work in close contact with the entire design team. Project Management • Lead projects with a service-first mindset, ensuring client expectations are met through clear communication and technically sound, high-quality deliverables, • Oversee electrical design for small to medium-sized projects while fostering collaboration and empowering emerging professionals, • Mentor junior design engineers by sharing knowledge, encouraging innovation, and reinforcing a culture of continuous learning, • Support the preparation of proposals for small to medium-sized projects in collaboration with senior engineers, promoting teamwork and business development, • Uphold P2S standards for documentation and quality, reinforcing accountability and trust throughout the project lifecycle Construction Administration • Provide timely, thoughtful responses to RFIs, maintaining a high level of service and client satisfaction throughout construction, • Review submittals with a detail-oriented and quality-driven mindset to ensure engineering intent and code compliance, • Foster collaboration and trust with contractors and field teams by being accessible, clear, and solution-oriented during construction phases, • Participate in punch walks and prepare punch list reports with a focus on delivering excellence and functional completeness, • Uphold accountability and integrity by ensuring that final systems reflect design intent and contribute to long-term client success, • Serve as a technical advocate for the client during construction, proactively addressing challenges to maintain design vision and project momentum #LI-Hybrid #LI-CC1 What sets P2S apart? For 15 years in a row, P2S has been regarded as a "Best Place to Work" by our employees. Why? Because we value satisfied employees just as much as satisfied clients. With competitive benefits, flexible work schedules, paid training/professional memberships, and more. - we aim to attract the best talent and keep them here Learn more about what it means to work at P2S: ___ P2S is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. About Legence ___ (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. Benefits 401(k) Plan with Company Match: Currently match contributions dollar-for-dollar up to 4% of eligible pay; immediate vesting. Health & Welfare Benefits: Employer provided medical, dental, vision, prescription drug, Employee Assistance Program and accident & illness coverage. Life and Disability Insurance: Employer provided basic life insurance and AD&D valued at 50K coverage amount with the option for voluntary buy-up for additional coverage. Time Off: Flexible non-accrual vacation; company holidays per policy. (For California employees, this is separate from California paid sick leave, if applicable.) Expenses: Business travel and related expenses reimbursed per company policy. Discount Program: Company-sponsored discount program with savings on multiple lifestyle categories. Reasonable Accommodations If you need assistance or accommodations during the application or interview process, please contact us at ___ or your dedicated recruiter with the job title and requisition number. Third-Party Recruiting Disclaimer Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. Pay Disclosure & Considerations Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. Equal Employment Opportunity Employer Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations.

This internship offers handson experience supporting materials management and continuous improvement through participation in Lean Kaizen activities and followup initiatives. Interns will analyze inventory, MRP parameters, lead times, and planning data to help improve raw, semifinished, and finished goods performance across manufacturing and distribution operations. The role focuses on reducing excess and obsolete materials, improving inventory health, addressing product expiry and scrap, and supporting solution implementation, performance tracking, and final presentations of results. How You'll Make An Impact: • Supporting 1-2 Irvine operations in each of their improvements to inventory $, inbound freight cost, and 'net scrap' (i.e. expiry), • Kaizen preparation: Baseline Data collection and analysis, understanding MRP (impact of planning/buying, impact of key master data (safety stock, lead time, lot size, etc), and how these factors impact inventory dollars, inventory turns and product expiry., • Post kaizen sustainment (of improvements) daily management, process indicators, standard work, and plant MORs., • Participation in a minimum of 1 Global Lean Kaizen., • Implementation of local KPIs (Plant inventory dashboard) for each work area., • Education: Major in Operations Management, Material management, Manufacturing Engineering, Mechanical Engineering or equivalent., • Work Experience: Previous summer internships or work experience in laboratories, manufacturing environments working with electromechanical, chemical and/or mechanical devices., • Laboratory experience working with electrical/electro mechanical devices and equipment is a plus., • Strong interpersonal skills: Must work well/interact well with people of all levels of education, work experience and different functions/departments., • Problem solver: natural curiosity, inquisitiveness and a seek-to-understand mentality., • 3.0 Minimum GPA., • Rising Juniors, Seniors, and Masters Students. Total Rewards Package: At Bio-Rad, we're empowered by our purpose and recognize that our employees are as well. That's why we offer a competitive and comprehensive Total Rewards Program that provides value, quality, and inclusivity while satisfying the diverse needs of our evolving workforce. Bio-Rad's robust offerings serve to enrich the overall health, wealth, and wellbeing of our employees and their families through the various stages of an employee's work and life cycle. Benefits: We're proud to offer a variety of options, including competitive medical plans for you and your family, free HSA funds, a new fertility offering with stipend, group life and disability, paid parental leave, 401k plus profit sharing, an employee stock purchase program, a new upgraded and streamlined mental health platform, extensive learning and development opportunities, education benefits, student debt relief program, pet insurance, wellness challenges and support, paid time off, Employee Resource Groups (ERG's), and more! Compensation: The hourly range for this position is $25 at the time of posting. Actual compensation will be provided in writing at the time of offer, if applicable, and is based on several factors we believe fairly and accurately impact compensation, including geographic location, experience, knowledge, skills, abilities, and other job permitted factors. Who We Are: For 70 years, Bio-Rad has focused on advancing the discovery process and transforming the fields of science and healthcare. As one of the top five life science companies, we are a global leader in developing, manufacturing, and marketing a broad range of high-quality research and clinical diagnostic products. We help people everywhere live longer, healthier lives. Bio-Rad offers a unique employee experience with collaborative teams that span the globe. Here, you are supported by leadership to build your career and are empowered to drive change that makes an impact you can see. EEO Statement: Bio-Rad is an Equal Employment Opportunity/Affirmative Action employer, and we welcome candidates of all backgrounds. Veterans, people with physical or mental disabilities, and people of all race, color, sex, sexual orientation, gender identity, religion, national origin and citizenship status are encouraged to apply. Agency Non-Solicitation:Bio-Rad does not accept agency resumes, unless the agency has been authorized by a Bio-Rad Recruiting Representative. Please do not submit resumes unless authorized to do so. Bio-Rad will not pay for any fees related to unsolicited resumes. Fraud Alert: Bio-Rad has received reports of individuals posing as Bio-Rad recruiters to obtain information, including personal and financial, from applicants. Beware of these fake "recruiters" and job scams. ___ for more information on this scam and how to avoid it. Legal Entity: (USA_1000)Bio-Rad Laboratories, Inc.