Offres mechanical engineering à Madison, Wisconsin - Page 3Créer des alertes d'emploi

Job Description Sharpe Engineering & Equipment is seeking an experienced Senior Process Engineer to support the design, development, and execution of sanitary process systems for the food & beverage industry. This hands-on technical expert will take projects from concept through design, equipment specification, installation, and commissioning—ensuring every solution meets Sharpe’s standards for quality, safety, and operational excellence. In this role, you’ll collaborate closely with clients, internal engineering teams, contractors, and vendors. You will play a key role in shaping process solutions, delivering exceptional project results, and advancing Sharpe’s reputation as a trusted partner in food & beverage processing. • Key Responsibilities, • Design and layout fluid process systems, including batching, processing, packaging, CIP/COP, pasteurization, filtration, and heat exchange technologies., • Develop PFDs, P&IDs, utility and equipment matrices, mass balances, SOPs, and SSOPs., • Size and specify process equipment, pumps, valves, instrumentation, and utility systems such as steam, glycol, condensate, cooling water, and city water., • Prepare performance specifications and RFQs, and coordinate with vendors throughout the equipment selection process., • Identify process improvements and support continuous improvement initiatives across client operations., • Collaborate with internal teams to ensure alignment across engineering, project management, installation, and start-up activities., • Provide field supervision or support during equipment installation, commissioning, and site visits. Requirements • What We’re Looking For, • Bachelor’s degree in Engineering (Mechanical, Process, Chemical, or related)., • 8–10+ years of relevant process engineering experience; supervisory experience preferred., • Strong understanding of 3A, USDA, and FDA sanitary design requirements., • Proficiency with AutoCAD (including isometric drawings), Microsoft Office, and process engineering tools., • Experience executing process design from concept through installation and commissioning., • Ability to travel to client sites (30–50%) for meetings, design reviews, installation support, and start-ups. Sharpe Engineering offers a comprehensive benefits package designed to support your health, well-being, and work-life balance. Our benefits include paid time off (PTO) plus 10 paid holidays, a flexible work schedule, and medical, dental, and vision insurance. We also provide short-term and long-term disability coverage, as well as life insurance, helping ensure peace of mind for you and your family. Sharpe Engineering & Equipment is an Equal Opportunity Employer.

Job DescriptionDescription: SHINE Technologies is seeking a Mechanical Engineer for the Systems and Manufacturing division who will develop the mechanical systems required for safe and reliable operation, manufacturability, and serviceability of SHINE neutron generators, ion implanters, and radiopharmaceutical production equipment. The Mechanical Engineer will be responsible for contributing to mechanical designs on assigned projects, including conceptualizing, design development, analysis, modeling, verification, BOM management, drafting, and supporting designs through production. The base salary range for this position is $75,000 - $110,000 per year plus a comprehensive compensation package. Our salary ranges are determined by role, level, and location. Duties and Responsibilities of Mechanical Engineer: • Present design concepts to stakeholders and hold design reviews to converge on good solutions., • Perform, coordinate, and manage detailed mechanical design of neutron generating and ion implantation capital equipment including:, • 3D CAD models of designs, • Analyze designs to prove design criteria are met e.g. FEA and CFD, • Create & release detailed drawings, • Develop Bills of Materials for systems and complex assemblies, • Lead designs through the engineering change process, • Collaborate with vendors to ensure manufacturability of design, • Assist with assembly of prototype units., • Collaborate with test engineers to verify designs., • Collaborate with the Engineering Manager & Design Team to develop & update department Standard Operating Procedures.Requirements:, • BS in Mechanical Engineering with experience designing complex and/or precision mechanical systems or 5 years equivalent work experience., • Experience in a production environment desired., • Experience with SolidWorks is preferred, but other 3D CAD packages will be considered., • Working knowledge of engineering calculations and analysis methods, including but not limited to: power, torque, structural, air & water flow/pressure calculations etc., • Working knowledge of tolerances and GD&T., • Effective problem solving, judgment, and independent thinking skills for troubleshooting, repair, & recognition of acceptable or unacceptable product quality., • Excellent technical writing and oral communication skills., • Ability to quickly assess assigned task requirements, identify potential challenges, and communicate effectively to expedite the successful execution of assigned work., • Ability to work independently and within team environments., • Ability to remain in a stationary position (e.g., standing or sitting) for extended periods., • Ability to move within facility environments, including accessing testing areas and operating instrumentation., • Use of personal protective equipment (PPE)., • Work involves moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors, and/or loud noises., • Work environment involves some exposure to hazards or physical risks, which require following basic safety precautions. Eligibility for employment is conditioned on the applicant’s ability to qualify for access to information subject to U.S. Export Controls. Additionally, applicant’s eligibility may be conditioned based upon meeting the Nuclear Regulatory Commission requirements for access to Safeguards Information, which typically requires a pre-employment drug screen, fingerprinting and criminal background check. SHINE values diversity in all its forms as a critical component of innovation, which is fundamental to our success. Every member of the SHINE community benefits from the talents and experiences of our peers, from the mutual respect we exercise, and from the responsibility we take for our actions. SHINE Technologies is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Pay Transparency Policy Employee Rights Under the NLRA Equal Opportunity Employment E-Verify

Job Description BIOFerm™ is looking for a Quality Control Engineer to ensure its renewable energy projects meet the company’s standards for safety, performance, and reliability. This position oversees quality processes throughout design, fabrication, construction, and commissioning phases. The ideal candidate has strong technical aptitude, attention to detail, and experience implementing quality management systems within engineering or construction environments. BIOFerm™ provides turnkey anaerobic digestion and gas upgrading facilities. Committed to sustainable and economical organic waste diversion, BIOFerm™’s digester technology harnesses biogas from fermenting organics—food waste, manure, biosolids, etc.—and converts it into valuable green energy, vehicle fuel, heat and organic products. Its gas upgrading systems enable biogas producers to profitably upgrade biogas to renewable natural gas (RNG). Key Responsibilities: • Develop, implement, and maintain quality control procedures and inspection plans for engineering, fabrication, and construction activities., • Review drawings, specifications, and project documents to ensure compliance with design standards and regulatory requirements., • Conduct inspections and quality audits on materials, equipment, and workmanship at vendor facilities and job sites., • Track and document inspection results, nonconformance reports, and corrective actions., • Collaborate with engineering, procurement, and construction teams to resolve quality issues in a timely manner., • Verify that subcontractors and suppliers meet BIOFerm’s quality and safety standards., • Support the commissioning process and verify that systems perform in accordance with project requirements., • Maintain calibration and testing records for inspections., • Provide training and guidance to project staff and contractors on quality expectations and procedures., • Prepare quality documentation for client handover, including inspection records and test reports., • Continuously improve QA/QC processes to enhance project efficiency and reliability., • Travel to fabrication shops, vendor locations, and project sites as needed., • Perform additional tasks as assigned. Competencies & Qualifications: • Bachelor’s degree in Mechanical, Electrical, Civil, or Industrial Engineering, or a related technical field., • 5+ years of experience in quality assurance/quality control within construction, manufacturing, or renewable energy sectors., • Strong understanding of engineering drawings, specifications, and industry standards (ASME, ASTM, AWS, etc.)., • Experience with quality management systems (ISO 9001 or equivalent)., • Proficiency in inspection techniques, root cause analysis, and corrective action implementation., • Strong problem-solving, organizational, and communication skills., • Proficient in Microsoft Office Suite and familiar with project management or document control software (e.g., Autodesk Build)., • Ability to work independently, manage multiple priorities, and collaborate effectively in cross-functional teams., • Willingness to travel and work at job sites as required., • Valid U.S. driver’s license., • Valid authorization to work in the U.S. without current or future sponsorship. Compensation & Benefits: Compensation is based on experience and is competitive. BIOFerm™ offers a comprehensive benefits package. To be considered for this position, please submit your cover letter, resume, and salary requirements. To learn more about BIOFerm™ and other positions available, please explore our website at BIOFermEPC.com.

Job Description Infleqtion is on a mission to commercialize atom-based quantum technologies that deliver orders-of-magnitude improvements in sensing and computing applications. We are seeking self-motivated, energetic individuals with exceptional problem-solving and technical skills to help drive our Quantum Computing mission forward. At Infleqtion we embrace a startup mentality driven by results, urgency, and customer-focused innovation: • We break down barriers between disciplines, stepping in wherever we can make the biggest impact., • We thrive in uncertainty, embracing challenges as opportunities., • We move quickly to prototype while never losing sight of the critical importance of systems engineering process and attention to detail. The duties and responsibilities outlined below include essential functions of the role. Depending on business needs, this role may perform a combination of some or all of the following duties. Duties, responsibilities, and activities may change, or new ones may be assigned at any time. • Design, develop, and deploy reliable, maintainable, scalable, and fault-tolerant backend services and frameworks that control and calibrate our neutral atom quantum computers., • Collaborate with interdisciplinary teams, including scientists, opto-mechanical engineers, and electrical engineers, to solve complex problems and deliver high-quality software solutions., • Empower interdisciplinary teams to create the tools they need by teaching engineering and programming best practices., • Mentor and guide junior engineers, fostering their growth and enhancing the team's technical expertise., • Lead code and design reviews, upholding engineering best practices and promoting a culture of quality and collaboration., • Support and debug all layers of the control stack from real-time embedded kernels to distributed services., • Bachelor's degree in Computer Science, Applied Mathematics, Physics or related field and a minimum of 5 years prior work experience, • Experience with Python and at least one compiled language, with a desire to learn and work in Rust, • Experience with Linux and virtualization technologies like Docker, • Good verbal and written communication skills, able to effectively share information with technical and non-technical staff, • Good collaboration skills, able to work in a team environment where engagement and participation are an expected part of successful job performance, • Skilled in typical software engineering disciplines: testing, debugging, revision control, error-handling, readability, documentation, general code health, etc., • Desire to constantly improve and learn inside and outside of expertisePREFERRED EXPERIENCE:, • Domain-specific experience in statistics, machine learning, or AMO physics, • Experience with Numpy, Scipy, and Pytorch, • Experience with image analysis, emphasis on realtime object detection, • Experience with databases (relational and non-relational) including but not limited to timeseries data, SQL, and ETL processes The targeted salary range for this role is $106,000 to $145,000 on an annualized basis plus eligibility to participate in our annual incentive plan. In addition to your base compensation, we offer a generous Total Rewards program which includes: • 100% company paid Employee coverage for Medical, Dental, Vision, and Short/Long Term Disability insurance programs, • Employer funded Health Savings Account, • Unlimited Paid Time Off, • 401(k) Matching Programs, • Company paid Life and AD&D Insurance, • Flexible Healthcare Savings Account, • Paid FMLA Leave, • Paid Maternity/Paternity Leave, • Employer Assistance Program Here you have freedom to embrace your whole self: who you love, your gender identity and expression, skin color, age, appearance, disability, neurodiversity, DNA, military/veteran status, citizenship, and other factors that make up who you are. Your uniqueness is valued, welcomed, and appreciated here. We are dedicated to providing a positive workplace and base all employment decisions on your qualifications, performance, merits, as well as business needs. We are proud to be an Equal Employment Opportunity Employer.

Job DescriptionDescription: SHINE Technologies is seeking a Research Engineer who will be responsible for inventing, developing, and refining the technology inherent to SHINE’s business and products. Additionally, the Research Engineer individual will be charged with troubleshooting existing systems and designing and building test equipment to expand SHINE’s basic knowledge in fields pertinent to its business. The base salary range for this position is $90,000 - $115,000 per year plus a comprehensive compensation package. Our salary ranges are determined by role, level, and location. Duties and Responsibilities: Specific duties and responsibilities of the Research Engineer include, but are not limited to: • Design and implement experiments to further understanding of essential technologies for SHINE’s core products., • Record and analyze data from existing systems and test rigs., • Perform various computer analyses (mechanical, electrostatics, magnetostatics, etc.) on existing products and potential designs; provide analysis for these analyses., • Design, prototype, and evaluate new components and products for Phoenix. Assist the mechanical engineering team in productizing these designs., • Troubleshoot existing products and prototypes., • Perform extensive literature searches for data and experiments relevant to Phoenix’s core technology., • Create detailed and comprehensive written reports of work performed and results found. Requirements: • Advanced degree in physical science or engineering field or 3+ years’ experience as a research engineer., • Extensive knowledge of, and experience with vacuum systems and vacuum system design., • Extensive knowledge of, and experience with high voltage power and high voltage design., • Knowledge of CAD software, particularly SolidWorks, • Experience with finite element modeling software including mechanics, electrostatics, and magnetostatics design and the ability to rapidly learn others., • Excellent communication and collaborative skills., • Must have the ability to conceive and perform mathematical analyses of complicated physical problems. Eligibility for employment is conditioned on the applicant’s ability to qualify for access to information subject to U.S. Export Controls. Additionally, applicant’s eligibility may be conditioned based upon meeting the Nuclear Regulatory Commission requirements for access to Safeguards Information, which typically requires a pre-employment drug screen, fingerprinting and criminal background check. SHINE values diversity in all its forms as a critical component of innovation, which is fundamental to our success. Every member of the SHINE community benefits from the talents and experiences of our peers, from the mutual respect we exercise, and from the responsibility we take for our actions. SHINE Technologies is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Pay Transparency Policy Employee Rights Under the NLRA Equal Opportunity Employment E-Verify

Job DescriptionBIOFerm™ is looking for an Instrumentation & Controls Engineer responsible for the design, specification, integration, and commissioning of instrumentation and control systems used in BIOFerm’s renewable energy projects. This role ensures accurate process measurement, reliable automation, and seamless communication across all plant systems. The ideal candidate will have strong technical expertise in process instrumentation, field devices, and control system design within industrial or energy settings. BIOFerm™ is a Wisconsin-based renewable energy company specializing in turnkey anaerobic digestion and biogas upgrading facilities. Our mission is to provide sustainable and economical solutions for organic waste diversion, transforming food waste, manure, biosolids, and other organic materials into renewable natural gas (RNG), green energy, vehicle fuel, heat, and organic products. Key Responsibilities: • Design, program, and integrate control systems for anaerobic digestion and biogas facilities based on specific control philosophy., • Develop and implement PLC, HMI, and SCADA software for system automation and monitoring., • Specify, configure, and calibrate field instruments including sensors, transmitters, analyzers, and control devices., • Create and maintain P&IDs, I/O lists, loop diagrams, and wiring schematics., • Ensure compliance with relevant codes, standards (e.g., IEC, ISA), and safety regulations., • Design and plan firmware and software architecture for process control and system automation., • Develop start-up and commissioning strategies; lead on-site commissioning, testing, and troubleshooting., • Design user interfaces for control systems to ensure clear, intuitive plant operation and monitoring., • Collaborate with process, electrical, and mechanical engineers to ensure complete and coordinated system design., • Select and manage vendors for hardware, software, and automation components., • Review vendor submittals and ensure compliance with BIOFerm’s specifications and industry standards., • Provide remote and on-site support for troubleshooting and system optimization., • Support continuous improvement of control system standards, templates, and programming practices., • Maintain thorough documentation of software, configuration, and control logic for each project., • Travel occasionally to project sites for commissioning, start-up, or service support., • Complete additional tasks as assigned.Competencies & Qualifications:, • Bachelor’s degree in Instrumentation, Electrical, Automation, or Control Engineering., • 5+ years of experience in instrumentation and automation within EPC or process industries., • Experience with biogas, anaerobic digestion, or similar renewable energy technologies is highly desirable., • Proficiency with Siemens Simatic S7 systems (required)., • Experience with programming platforms such as STEP 7, TIA Portal, RSLogix (5, 500, 5000), Studio 5000, FactoryTalk, and WinCC., • Familiarity with Ladder Logic, Function Block, and SCADA programming within MS SQL environments., • Solid understanding of automation networks, bus systems, drive control, and process instrumentation., • Experience developing and commissioning control systems for process or industrial facilities., • Strong technical comprehension and problem-solving abilities., • Excellent written and verbal communication skills., • Ability to work independently and manage multiple priorities in a fast-paced environment., • Willingness to travel up to 20%., • Valid U.S. driver’s license., • Valid authorization to work in the U.S. without current or future sponsorship. Compensation & Benefits: Compensation is based on experience and is competitive. BIOFerm™ offers a comprehensive benefits package. To be considered for this position, please submit your cover letter, resume, and salary requirements. To learn more about BIOFerm™ and other positions available, please explore our website at BIOFermEPC.com.

Job DescriptionDescription: SHINE Technologies is seeking a Manufacturing Engineer to develop, implement, and maintain production methods for manufacturing components, sub-assemblies and final assemblies for neutron generator and particle accelerator related capital equipment. Leads the engineering function during the release of new products. The Manufacturing Engineer identifies manufacturing improvement opportunities, determines requirements to implement, and recommends tooling/process needs for new and existing product lines. The Manufacturing Engineer maintains drawings, records, and reporting systems for operations and service activities. The base salary range for this position is $95,000 - $110,000 per year plus a comprehensive compensation package. Our salary ranges are determined by role, level, and location. Duties and Responsibilities: Specific duties and responsibilities include, but are not limited to: • Develop processes, work instructions, & quality records for assembly & test for assigned projects., • Specify and procure tooling, fixtures, and software for operations processes., • Design and build custom tooling and fixtures as needed., • Manage the release of products into manufacturing., • Provide technical support for production by responding to line disruptions and resolving quality issues., • Participate in supplier assessment and corrective actions as applicable to improve quality of incoming materials., • Work with suppliers to ramp up production of parts and to resolve issues on existing items., • Lead continuous improvement initiatives to improve the quality & efficiency of operations., • Provide production input to cross-functional teams ensuring new products and product improvements can be produced efficiently., • Ensure Bill of Materials (BOM) are complete, accurate, and structured appropriately for operations and service activities., • Improve manufacturing efficiency by analyzing and planning workflows, space requirements, and equipment layouts. Requirements: • B.S. Degree in Mechanical, Electrical, Industrial Engineering or related technical degree., • 5+ years of manufacturing engineering experience is preferred., • Effective problem solving, judgment, and independent thinking skills for troubleshooting, repair, and recognition of acceptable or unacceptable product quality., • Experience with electro-mechanical assembly & troubleshooting., • Ability to work with electronic & mechanical test equipment., • Excellent technical writing and oral communication skills., • Proven ability to train personnel on production procedures., • Able to quickly assess assigned task requirements, identify potential challenges, and communicate effectively to expedite the successful execution of assigned work., • Experience in:, • Flow charting and workflow mapping., • SolidWorks or similar applications is desired., • Understanding electrical schematics and good wiring practices, including IPC standards for cable and wiring assemblies, is desired., • Product and process development., • Development of manufacturing tools and fixtures., • Good engineering practices including documentation, GD&T, change control, product structure, and bills of materials. SHINE values diversity in all its forms as a critical component of innovation, which is fundamental to our success. Every member of the SHINE community benefits from the talents and experiences of our peers, from the mutual respect we exercise, and from the responsibility we take for our actions. SHINE Technologies is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Pay Transparency Policy Employee Rights Under the NLRA Equal Opportunity Employment E-Verify

Job DescriptionDescription: SHINE Technologies is immediately seeking Research & Development Interns. The R&D Internship offers a unique opportunity to gain hands-on experience in cutting-edge plasma physics and engineering, contributing to the development of advanced beam line technology. These positions will specifically focus on supporting the design and development of mechanical and nuclear systems which ensure the safe, efficient and effective operation of the facility. Interns will be involved in the design and implementation of a wide variety of systems. Experience in performing calculations as well as knowledge of equipment such as pumps, heat exchangers, valves and control equipment is highly desired. Additionally, the ideal candidates will have some experience with design-based tools such as Solidworks, AutoCAD or Inventor. The base salary range for this position is $20.00/hour-$23.00/hour. Requirements: We are seeking candidates who are currently pursuing or have recently completed a degree in Mechanical Engineering, Nuclear Engineering, Electrical Engineering, or Chemical Engineering or Process Engineering or related field. Eligibility for employment is conditioned on the applicant’s ability to qualify for access to information subject to U.S. Export Controls. Additionally, applicant’s eligibility may be conditioned based upon meeting the Nuclear Regulatory Commission requirements for access to Safeguards Information, which typically requires a pre-employment drug screen, fingerprinting and criminal background check. SHINE values diversity in all its forms as a critical component of innovation, which is fundamental to our success. Every member of the SHINE community benefits from the talents and experiences of our peers, from the mutual respect we exercise, and from the responsibility we take for our actions. SHINE Technologies is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Pay Transparency Policy Employee Rights Under the NLRA Equal Opportunity Employment E-Verify

Job Description Our client has been synonymous with dependability and quality in the air freight industry since 1986. As the company has grown, so has the number of industries it serves. Today, the company continues to provide the most excellent customer care-driven service to the air freight industry and many others. By carrying over the core belief structure forged in the air freight business of providing the customer what they want on time and at a competitive rate, our client can provide superior air freight services to our growing list of satisfied customers. They are currently recruiting for an A&P Mechanic job in Milwaukee, WI. What Is In It For You Position Type: Permanent - Full-time Benefits: Health, Dental, Vision, Life, STD/LTD, Vacation Pay, Sick Pay, Holiday Pay, 401(k) A Day In The Life of an A&P Mechanic The position you are applying for will be under general supervision. You are responsible for the maintenance, modification, and servicing of aircraft and aircraft components following the manufacturer’s specification and FARS. Essential Duties of The A&P Mechanic • Perform routine scheduled maintenance and aircraft inspection by ACC’s and current manufacturers' specifications., • Read and interpret aircraft maintenance manuals and specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components., • Modifies aircraft systems or components following drawings, engineering orders, and technical publications., • Assemble and install electrical, mechanical, hydraulic, and structural components and accessories using hand and power tools., • Provide emergency/unscheduled repairs to minimize aircraft downtime. Requires ability to travel., • Review maintenance records and flight logs to schedule prescribed maintenance checks and overhauls., • Process all necessary documentation and paperwork for processes completed., • Follow all clean-up and housekeeping procedures. Minimum Education: • Interpret drawings, specifications, and schematics of aircraft parts/components., • Problem-solving and independent decision-making skills, • Good communication skills, • Operate hand and power tools Vision Requirements: This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing, LLC are those of an Employment Agency

Job Description As a BIM Project Specialist, you will be responsible for supporting the design, coordination, and execution of Building Information Modeling (BIM) processes specifically for structural detailing, and multidisciplinary coordination. This role plays a critical part in translating engineering concepts into accurate, constructible models and drawings using Revit and related BIM tools. You will work closely with engineers and designers to develop detailed Revit models, ensuring that mechanical, electrical, and plumbing systems are accurately represented and well-coordinated within the project. Your role will contribute to enhancing project efficiency, collaboration, and overall quality. As part of EUA, a fully integrated architecture and engineering firm, BIM coordination is crucial in facilitating seamless collaboration across disciplines. Our holistic approach to design requires accurate and efficient coordination between HVAC, plumbing, electrical, structural, and architectural systems, ensuring that all elements of a project are aligned from concept through to completion. Key Responsibilities • Develop, maintain, and revise structural BIM models in Autodesk Revit for a variety of project types. Ensure that all models comply with industry standards and project specifications., • Produce structural drawings, details, and schedules in support of design and construction documentation, • Assist structural engineers with model setup, modeling standards, and drawing production, • Coordinate structural models with architectural, MEP, and other discipline models to identify and resolve clashes, • Participate in BIM coordination meetings and respond to coordination issues, • Implement and adhere to company BIM standards, templates, and workflows, • Assist with model quality control to ensure accuracy, consistency, and constructability, • Support project teams during design development, permitting, and construction phases as needed, • Standards and Quality Control: Ensure adherence to BIM execution plans (BEP), managing project-specific BIM standards for structural systems. Perform regular quality control checks on models to maintain accuracy and alignment with project goals., • Knowledge of EUA Standards: Ensure all structural models adhere to EUA's internal standards and best practices, maintaining consistency, sustainability, and accuracy across all projects. Your work will reflect EUA’s commitment to high-quality, integrated design and engineering excellence., • Training and Support: Provide technical support to engineers and designers on Revit and BIM processes related to structural systems. Conduct training sessions on best practices and advanced features in Revit., • Accurate and Coordinated Models: Ensure that structural Revit models are fully coordinated with other building systems, free from significant clashes, and meet project requirements., • Effective Coordination and Clash Resolution: Lead coordination and clash detection meetings, ensuring that all design conflicts are identified early and resolved efficiently. Streamline interdisciplinary collaboration to minimize delays and enhance project delivery., • Optimized BIM Processes: Continuously refine and optimize EUA’s BIM processes for structural systems, contributing to improved project timelines and quality outcomes., • Data Integrity and Accessibility: Maintain high standards for data integrity throughout the project, ensuring accurate structural information is accessible to all stakeholders. Qualifications and Skills • Two- or four-year degree or certificate in Drafting, BIM, Civil/Structural Technology, or a related field, • 3+ years of experience in a structural (or architectural) drafting or BIM role, • Experience working in a consulting structural engineering (or architectural) environment, • Familiarity with Revit, Navisworks, Bluebeam, or similar coordination tools, • Knowledge of BIM execution plans, model coordination workflows, and LOD requirements, • Exposure to construction documents for commercial and/or industrial projects, • Strong problem-solving skills, attention to detail, and ability to work within multidisciplinary teams., • Excellent communication skills and the ability to mentor others on BIM/VDC processes related to structural., • Has a proactive approach to projects and problem solving and can self-direct project work, tasks, and process improvements., • Assists in on-site observation and documentation., • Pay range for this position is $50,000 to $80,000 depending on experience

Job Description Job Title: Study Director Job Description Join our dynamic team in the ADME In vitro Screening department, focusing on Absorption, Distribution, Metabolism, and Excretion (ADME). This role involves conducting studies to understand how the body interacts with drugs and compounds. You will work in a metabolism lab using in-vitro techniques to analyze biological samples such as plasma, blood, urine, and feces. This position offers the opportunity to be cross-trained in both biology and chemistry aspects of drug metabolism and pharmacokinetics. Responsibilities • Conduct research with both animal and human biological samples, focusing on in-vitro techniques., • Utilize basic wet chemistry techniques such as pipetting, plate reading, and liquid handling., • Perform stability assays, protein binding assays, and enzyme inhibition assays., • Operate Mass Spectrometry (MS) and Liquid Chromatography-Mass Spectrometry (LC-MS) equipment., • Maintain and grow mammalian cell lines for assay preparation., • Employ sterile techniques and perform cell counting and extractions., • Handle and conduct studies from start to finish using cell lines, blood, or plasma., • Develop assays and run research projects for clients., • Proficiency in aseptic and sterile techniques., • Experience in chemistry and wet chemistry processes., • Knowledge of liquid chromatography and mass spectrometry., • B.S. degree in Chemistry, Biochemistry, Pharmacology, Drug Discovery, or related Life Science field., • Proficient in liquid handling and pipetting., • Ph.D. in Chemistry, Biochemistry, Pharmacology, Drug Discovery, or related Life Science field preferred., • 0-3 years of experience in the field., • Experience in drug metabolism and pharmacokinetics., • Familiarity with Hamilton robotics or liquid handling equipment., • Experience with UV-vis plate readers, cell counters, and various assays., • Experience in mammalian cell culture, cloning, or plasmid transfections. This position is within a busy lab environment focused on drug development and discovery. The role involves working as part of the Discovery BioA and In-vitro Screening teams. It is a fast-paced and high-stress environment that offers the unique opportunity to manage studies from start to finish, a rarity in many labs. The lab encourages a coachable, open-minded, and motivated approach to learning and problem-solving. Job Type & Location This is a Contract to Hire position based out of Madison, WI. Pay and Benefits The pay range for this position is $40.87 - $43.27/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Our client has been synonymous with dependability and quality in the air freight industry since 1986. As the company has grown, so has the number of industries it serves. Today, the company continues to provide the most excellent customer care-driven service to the air freight industry and many others. By carrying over the core belief structure forged in the air freight business of providing the customer what they want on time and at a competitive rate, our client can provide superior air freight services to our growing list of satisfied customers. They are currently recruiting for an A&P Mechanic job in Milwaukee, WI. What Is In It For You Position Type: Permanent - Full-time Benefits: Health, Dental, Vision, Life, STD/LTD, Vacation Pay, Sick Pay, Holiday Pay, 401(k) A Day In The Life of an A&P Mechanic The position you are applying for will be under general supervision. You are responsible for the maintenance, modification, and servicing of aircraft and aircraft components following the manufacturer’s specification and FARS. Essential Duties of The A&P Mechanic • Perform routine scheduled maintenance and aircraft inspection by ACC’s and current manufacturers' specifications., • Read and interpret aircraft maintenance manuals and specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components., • Modifies aircraft systems or components following drawings, engineering orders, and technical publications., • Assemble and install electrical, mechanical, hydraulic, and structural components and accessories using hand and power tools., • Provide emergency/unscheduled repairs to minimize aircraft downtime. Requires ability to travel., • Review maintenance records and flight logs to schedule prescribed maintenance checks and overhauls., • Process all necessary documentation and paperwork for processes completed., • Follow all clean-up and housekeeping procedures. Minimum Education: • Interpret drawings, specifications, and schematics of aircraft parts/components., • Problem-solving and independent decision-making skills, • Good communication skills, • Operate hand and power tools Vision Requirements: This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing, LLC are those of an Employment Agency

Job DescriptionReliability Engineer Scientific Protein Laboratories (SPL) Waunakee, WI | On-site | Biopharmaceutical Manufacturing Eliminate failures. Strengthen assets. Drive reliability that protects life-saving production. Scientific Protein Laboratories (SPL) is a global leader in biopharmaceutical manufacturing, producing critical therapies that improve and save lives worldwide. Reliable equipment is essential to delivering safe, high-quality biologics…and that’s where you come in. We’re seeking a Reliability Engineer to lead reliability strategy and execution at our Waunakee, WI site. This role goes beyond reactive maintenance. You’ll drive failure elimination, optimize preventive maintenance programs, strengthen predictive maintenance capabilities, and influence capital investments that improve asset performance. If you thrive on data-driven problem solving, enjoy leading technical initiatives, and want to make measurable impact in a regulated manufacturing environment, this is a high-visibility opportunity to do just that.What You’ll Do As the Reliability Engineer, you’ll lead efforts to reduce unplanned downtime, eliminate repeat failures, and ensure maintenance resources are focused where they add the most value. Reliability Strategy & Failure Elimination • Lead Root Cause Analysis (RCA) for significant or repeat failures; drive corrective and preventive actions (CAPA) to closure, • Conduct FMEA on critical assets to identify failure modes and optimize maintenance strategies, • Identify and eliminate “Bad Actors” (chronic problem equipment) through structured improvement plans, • Analyze CMMS data to identify downtime drivers, reliability trends, and improvement prioritiesPreventive & Predictive Maintenance Optimization, • Own PM program technical strategy, including categorization, task optimization, and interval management, • Perform risk-based PM assessments (severity, occurrence, detection) and coordinate Quality-critical PM reviews with QA, • Develop and refine predictive maintenance (PdM) programs including vibration, thermography, oil analysis, and ultrasound, • Partner with Maintenance Planning to ensure PM content is technically sound and value-addedAsset Lifecycle & Capital Project Support, • Provide reliability input to capital projects, including design reviews, commissioning plans, and acceptance criteria, • Identify, propose, and lead capital projects that improve equipment reliability or eliminate chronic failure modes, • Support Asset Lifecycle Management (LCAM) processes for new or modified equipment installations, • Lead change control efforts for reliability improvements on GMP equipmentTechnical Leadership & Cross-Functional Collaboration, • Provide technical leadership to Engineering Technicians and experienced maintenance personnel, • Guide complex troubleshooting efforts and promote reliability best practices, • Partner with Production, Maintenance, Quality, and Engineering to drive sustainable reliability improvements, • Associate’s degree or higher in Engineering (Mechanical, Electrical, Chemical, Industrial, Reliability) or related discipline — or equivalent hands-on experience, • 2+ years of reliability, maintenance engineering, or related experience, • Experience performing or leading RCA, FMEA, or structured problem-solving methodologies, • Strong analytical skills and ability to interpret CMMS data, • Working knowledge of maintenance strategies within a regulated manufacturing environmentPreferred, • Bachelor’s degree or higher in Engineering, • 10+ years of reliability or maintenance engineering experience, • Experience in pharmaceutical, biologics, or GMP-regulated manufacturing, • Experience implementing predictive maintenance technologiesWhy Join SPL?, • Meaningful work supporting life-saving biologically based therapeutics used worldwide, • Competitive compensation package including base salary and recognition programs, • 401(k) with company match to support your long-term financial goals, • Generous paid time off (PTO) and paid holidays, • Career development and leadership growth opportunities within a global biopharmaceutical organization, • Collaborative, science-driven culture that values integrity, accountability, and continuous improvement, • High quality of life in Waunakee, WI! A growing community just outside Madison with excellent schools and outdoor recreation, • If you’re ready to eliminate repeat failures, optimize asset performance, and drive measurable reliability improvements in a GMP environment, SPL wants to hear from you. SPL is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, color, creed, disability, gender identity, national origin, protected veteran status, race, religion, sex, sexual orientation, and any other status protected by applicable local, state or federal law. We Make it Easy Founded in 1901, MRA is a nonprofit employer association that serves more than 4,000 employers, covering more than one million employees. As one of the largest employer associations in the nation, MRA helps its member organizations thrive by offering the most comprehensive assortment of HR services, information, education, and resources to help build successful workplaces and a powerful workforce. We partner with these companies working directly with their HR department and leadership to hire their talent. We are a direct line to the company, not an agency recruiter. Powered by JazzHR b7DLacRmj2

Job Description The Senior Project Engineer is a senior-level individual contributor responsible for delivering high-quality mechanical engineering solutions on assigned projects. Working under the direction of the Mechanical Engineering Manager and in coordination with the Project Manager, this role provides advanced technical expertise, prepares detailed engineering deliverables, and supports execution activities within defined project constraints. This role receives task assignments and workload prioritization from the Mechanical Engineering Manager. Key Responsibilities • Project Engineering & Design, • Lead development of project plans, design packages, equipment specifications, layouts, and engineering deliverables., • Produce detailed drawings, models, and specifications utilizing CAD tools (2D/3D)., • Develop and maintain PFDs, P&IDs, utility and equipment matrices, scope documents, and installation packages., • Recommend materials, components, and system configurations ensuring reliability, efficiency, and performance., • Project Execution & Technical Support, • Execute assigned engineering tasks in alignment with project scope, schedule, and budget established by the Project Manager and Mechanical Engineering Manager., • Provide technical problem-solving, design alternatives, and value-engineering options to reduce costs, improve schedule, and enhance serviceability., • Prepare and review equipment specifications, vendor submittals, and technical documentation to support procurement decisions., • Support commissioning, field testing, troubleshooting, and installation activities by providing mechanical engineering expertise as directed by the Project Manager., • Collaborate closely with internal engineering disciplines (process, controls, electrical), installation teams, and external vendors to resolve technical challenges and maintain project momentum., • Customer & Cross-Functional Collaboration, • Serve as primary technical contact for clients throughout project phases., • Maintain effective communication with internal teams, contractors, and vendors., • Collaborate with operations, controls, and fabrication teams to resolve challenges., • Quality, Compliance, and Continuous Improvement, • Ensure project designs adhere to regulatory codes, industry standards, and policies., • Identify and implement process and design improvements., • Prepare technical reports, progress updates, design changes, and recommendations., • Value Engineering & Budgeted Hours, • Identify cost-saving, schedule-improving, and maintainability-enhancing design opportunities and communicate these options to the Project Manager and Mechanical Engineering Manager. Sharpe Engineering & Equipment is built on a People-Centric foundation, where collaboration, integrity, and technical excellence drive everything we do. As a Senior Project Engineer, you will have the opportunity to work closely with talented engineering teams, trusted client partners, and innovative technologies to bring meaningful solutions to life. Your work will not only shape systems and processes, it will help shape the future of a growing organization that values your voice, your expertise, and your impact. Requirements What We’re Looking For • Bachelor’s degree in Mechanical, Process, Industrial, or related Engineering field required., • 7–10 years of engineering experience, including significant experience managing or leading complex technical projects., • Experience in equipment/system design, project engineering, or multidisciplinary engineering environments required., • Experience in sanitary, food & beverage, processing systems, or industrial manufacturing preferred., • Experience with AutoCAD, Inventor, Plant 3D, or similar 2D/3D design platforms., • Strong understanding of mechanical systems, equipment design, and system integration., • Ability to develop and review PFDs, P&IDs, mass balances, and specifications., • Proficient in Microsoft Office tools., • Excellent written and verbal communication skills., • Strong organizational skills and ability to manage multiple priorities., • Ability to lead project tasks and influence cross-functional teams. Sharpe Engineering offers a comprehensive benefits package designed to support your health, well-being, and work-life balance. Our benefits include paid time off (PTO) plus 10 paid holidays, a flexible work schedule, and medical, dental, and vision insurance. We also provide short-term and long-term disability coverage, as well as life insurance, helping ensure peace of mind for you and your family.

Job DescriptionDescriptionFranklin Electric is seeking a Summer Intern (June-August) who is interested in a career in Mechanical Engineering or a related field. The Mechanical Engineering Intern will be exposed to various aspects of the Product Engineering team. You will be immersed in the inclusive environment and given responsibilities that will promote growth for future professional experiences. Why You Should Apply: Franklin Electric (FELE) is a NASDAQ traded public company with headquarters in Fort Wayne, IN USA. Our mission is: We are a vital global leader in the manufacturing and distribution of systems focused on the movement and management of water, fuel and electricity. Madison, WI serves as the global headquarters of Franklin's fueling and electric grid product business. Our division is made up of ~600 employees of Franklin's total global team of ~7,000. You Will Have the Opportunity To: • Work on projects that span across multiple functional areas. The assigned projects will allow significant opportunity to develop cross functional knowledge and general business acumen., • Take part in new product development projects, sustaining engineering projects, and root cause analysis opportunities., • Participate in "Lunch & Learns" with the Executive Team where you will have the opportunity to ask questions of leaders across multiple functional areas., • Present an "End of Term" summary/presentation to Senior Leadership on your assigned projects. Skills, Knowledge and Expertise • Junior or Senior working towards a bachelor's degree in mechanical engineering or a related technical degree (required)., • 3D CAD experience (i.e. PTC Creo, SolidWorks, Inventor) is preferred. Franklin Electric Intern ProgramAs a global company, Franklin Electric offers many opportunities to build your experience and knowledge. Our Intern positions offer responsibility, autonomy, and best-in-class training. The Franklin Electric Intern Program includes opportunities for team building, job shadowing, and an opportunity to engage with and present to Senior Leaders and Executives in the company. Come join our Intern Program where you will not only grow in your career - but you will know you are a part of a company that is making a difference worldwide. Check out our website to learn more about us!

Job Description Sharpe Engineering & Equipment is seeking a Mechanical Systems Designer (Revit/Process Design) to support the design and development of engineering solutions for food and beverage processing facilities. This role plays a key part in translating engineering concepts into detailed 3D models, layouts, and construction documentation that support process piping systems, equipment integration, and facility infrastructure. You will work closely with Sharpe’s engineering, fabrication, and installation teams to develop accurate design packages that enable efficient project execution from concept through installation. This position contributes directly to Sharpe’s ability to deliver precise, high-quality solutions across process, packaging, and automation systems. This role reflects Sharpe’s Core Values: Integrity, Collaboration, Responsibility, Commitment to Stakeholders, and People-Centric Focus. Key Responsibilities Design & Engineering Support • Develop detailed 2D and 3D models of process piping systems, equipment layouts, and facility infrastructure using Revit and AutoCAD., • Produce construction, fabrication, and installation drawings that support project execution., • Translate engineering concepts and project requirements into clear, accurate design deliverables., • Develop piping layouts, equipment arrangements, and utility routing for food processing and packaging systems., • Prepare detailed design drawings including general arrangements, piping layouts, and equipment integration plans., • Implement design revisions and project markups from engineering and project teams., • Maintain organized project drawing files and documentation., • Work closely with process, mechanical, and controls engineers to ensure design deliverables reflect project requirements., • Coordinate with fabrication and installation teams to ensure designs support constructability and efficient field execution., • Create and manage high-quality marketing content including social media posts, blogs, presentations, trade show materials, case studies, and sales collateral., • Maintain and update marketing assets to ensure accuracy, consistency, and alignment with brand standards., • Participate in site visits to collect field measurements, verify layouts, and support installation activities as needed., • Ensure designs align with industry standards, safety guidelines, and applicable regulatory requirements., • Support continuous improvement of drawing standards, templates, and documentation practices. Why Join Sharpe? At Sharpe Engineering & Equipment, engineering design is at the core of what we deliver to our clients. As a Mechanical Systems Designer, you’ll play a critical role in transforming engineering concepts into real-world systems that improve efficiency, reliability, and performance in food and beverage manufacturing facilities. You’ll work alongside talented engineers, project managers, and installation specialists in a collaborative, people-centric environment that values innovation, integrity, and continuous improvement. Your work will directly support the delivery of complex process and packaging systems used by leading manufacturers across the industry. If you’re looking for a role where your design expertise makes a visible impact and where you can grow alongside a team committed to technical excellence, Sharpe is the place to build your career. Requirements What We’re Looking For • Associate’s or Bachelor’s degree in Mechanical Design, Engineering Technology, or a related field preferred (or equivalent professional experience)., • 3–7 years of experience in mechanical design, industrial drafting, or process equipment layout., • Experience in supporting engineering or capital equipment projects in industrial or manufacturing environments a plus., • Experience in food, beverage, pharmaceutical, or sanitary processing environments is preferred., • Experience with Revit (required) and AutoCAD., • Ability to read and interpret P&IDs, process flow diagrams, and mechanical layouts., • Understanding of piping systems, pumps, valves, and industrial equipment layouts., • Familiarity with fabrication and installation drawing requirements., • Strong attention to detail and commitment to drawing accuracy., • Effective communication and collaboration with cross-functional teams., • Ability to manage multiple priorities and project deadlines. Sharpe Engineering offers a comprehensive benefits package designed to support your health, well-being, and work-life balance. Our benefits include paid time off (PTO) plus 10 paid holidays, a flexible work schedule, and medical, dental, and vision insurance. We also provide short-term and long-term disability coverage, as well as life insurance, helping ensure peace of mind for you and your family. Sharpe Engineering & Equipment is an Equal Opportunity Employer.

Job DescriptionDescription: SHINE Technologies is seeking a Senior Mechanical Engineer who will develop the mechanical systems required for safe and reliable operation, manufacturability, and serviceability of SHINE neutron generators, ion implanters, and radiopharmaceutical production equipment. The Senior Mechanical Engineer will be responsible for leading all aspects of mechanical design on assigned projects, including requirements gathering, planning, conceptualizing, design development, analysis, modeling, verification, BOM management, drafting, and supporting designs through production. The base salary range for this position is $100,000 - $125,000 per year plus a comprehensive compensation package. Our salary ranges are determined by role, level, and location. Duties and Responsibilities of the Senior Mechanical Engineer: • Presenting design plans to stakeholders, assist with project planning for budget and schedule, • Contribute to development of engineering system design requirements in collaboration with Systems Engineers and other stakeholders, then drive development of subsystem requirements and interfaces, • Conceptualize systems and develop system level layouts, • Perform, coordinate, and manage detail mechanical design of neutron generating and ion implantation capital equipment including:, • 3D CAD models of designs, • Analyze designs to prove design criteria are met e.g. FEA and CFD, • Lead design reviews, • Create & release detailed drawings, • Develop Bills of Materials for systems and complex assemblies, • Lead designs through the engineering change process, • Collaborate with vendors to ensure manufacturability of design, • Assist with assembly of prototype units, • Collaborate with test engineers to verify designs, • Train & mentor other engineers, mechanical designers, & technicians as needed, • Prepare & deliver complex engineering-related presentations, both internally and externally, • Collaborate with the Engineering Manager & Design Team to develop & update department Standard Operating Procedures Requirements: • BS in Mechanical Engineering with substantial experience designing complex and/or precision mechanical systems or 10+ years equivalent work experience, • Experience in a production environment desired, • Experience with SolidWorks is preferred, but other 3D CAD packages will be considered, • Working knowledge of engineering calculations and analysis methods, including but not limited to: FEA, CFD, kinematics, power, torque, structural, air & water flow/pressure calculations etc., • Working knowledge of tolerances and GD&T, • Effective problem solving, judgment, and independent thinking skills for troubleshooting, repair, & recognition of acceptable or unacceptable product quality, • Excellent technical writing and oral communication skills., • Ability to quickly assess assigned task requirements, identify potential challenges, and communicate effectively to expedite the successful execution of assigned work., • Ability to work independently and within team environments., • Ability to remain in a stationary position (e.g., standing or sitting) for extended periods., • Ability to move within facility environments, including accessing testing areas and operating instrumentation., • Ability to handle standard equipment and materials weighing up to 50 pounds with or without reasonable accommodation., • Work may occasionally take place in controlled radiation areas under supervision and within regulatory exposure limits., • Use of personal protective equipment (PPE)., • Work involves moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors, and/or loud noises., • Work environment involves some exposure to hazards or physical risks, which require following basic safety precautions., • Although flexible work hours may be available, shift-work schedules may be required, and extended hours will sometimes be necessary to complete required work assignment. Eligibility for employment is conditioned on the applicant’s ability to qualify for access to information subject to U.S. Export Controls. Additionally, applicant’s eligibility may be conditioned based upon meeting the Nuclear Regulatory Commission requirements for access to Safeguards Information, which typically requires a pre-employment drug screen, fingerprinting and criminal background check. SHINE values diversity in all its forms as a critical component of innovation, which is fundamental to our success. Every member of the SHINE community benefits from the talents and experiences of our peers, from the mutual respect we exercise, and from the responsibility we take for our actions. SHINE Technologies is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Pay Transparency Policy Employee Rights Under the NLRA Equal Opportunity Employment E-Verify

Job DescriptionDescription: SHINE Technologies is on a mission to harness the power of fusion to improve society. As a Mechanical Engineering Intern, you will work alongside our engineering team to support the design, modeling, and analysis of mechanical systems used in our neutron generator and medical isotope production facilities. This is a hands-on role where your work directly contributes to technology that helps patients around the world. The base salary range for this position is $20.00/hour-$23.00/hour. Duties and Responsibilities: • Create and update engineering drawings and 3D CAD models using SolidWorks., • Support design and analysis of mechanical components and assemblies, including tolerancing and fit checks., • Assist with identifying and resolving assembly issues through design reviews and hands-on troubleshooting., • Assist in generating and maintaining engineering documentation., • Support prototype fabrication and testing activities., • Participate in design reviews and contribute ideas for continuous improvement., • Collaborate cross-functionally with engineering and operational teams., • Assemble and test mechanical assemblies., • Assist with troubleshooting of systems in close collaboration with R&D and Design Engineering teams., • Support assembly technicians as needed.Requirements:, • High school diploma required., • Enrollment in college engineering program. Current enrollment in an accredited Mechanical Engineering or Mechanical Design undergraduate program (any year considered) preferred., • Experience with 3D CAD software; SolidWorks strongly preferred, • Interest in science, physics, electronics, or mechanics., • Experience troubleshooting complex problem., • Experience with high vacuum systems, plasma sources and ion beams preferred., • Experience with a variety of tools including standard hand and machine tools, and basic electrical tools preferred., • Willingness to contribute in a breadth of areas and roles.

Job DescriptionDescription: SHINE Technologies is seeking a Test Engineer who will be responsible for the development and execution of test plans for SHINE equipment and processes. Test Engineers lead the commissioning and testing of electro-mechanical devices including the software. They also perform process acceptance testing of prototype production equipment and are responsible for product verification and validation. Test engineers are the primary operators of the first systems and develop the documentation for safe operation. They also develop test procedures and design test fixtures for components, sub-assemblies, and systems. The base salary range for this position is $79,000 - $85,000 per year plus a comprehensive compensation package. Our salary ranges are determined by role, level, and location. Duties and Responsibilities: Specific duties and responsibilities include, but are not limited to: • Develop detailed component and subassembly acceptance test procedures and criteria in collaboration with design engineering teams, • Create detailed system integration plans and system test procedures, • Test and verify components and subassemblies using electrical testing and/or precision measurement equipment, • Perform I/O checks, troubleshoot and repair problems found during testing, • Maintain detailed test records, • Operate SHINE accelerator systems, • Exercise prototype systems, establish system operating conditions and modes, • Lead the development of documentation for safe operation of first of a kind systems, • Participate in design reviews and provide practical feedback from system testing to influence future designs, • Member of team performing device commissioning, service and training of operators at customer sites, • Maintain a safe, clean, and organized test environment, • Perform job duties with minimal instruction or supervision Requirements: • BS in Mechanical, Nuclear, or Electrical Engineering, Physics or equivalent experience, • 2+ years of experience in a highly technical industry preferred, • Experience with basic electrical tools including DMM, oscilloscope and soldering, • Experience creating test procedures, assembly documentation and developing processes, • Experience troubleshooting complex electro-mechanical systems, • Ability to read CAD assembly models and electrical schematics, • Desire to learn innovative technologies and concepts, • Troubleshooting and debugging system hardware and software experience, • Troubleshooting knowledge of electro-mechanical devices and the processes they support, • Working knowledge of analog, digital, and power circuitry, able to read detailed schematics, • Working knowledge of high voltage systems, • Working knowledge of high vacuum systems, • Experience with plasma sources and ion beam, • Experience with LabVIEW development, • Experience with new product development, prototype and R&D, • Experience creating models and/or schematics in Solidworks/Solidworks Electrical (or other CAD software), • Proficiency in data analysis and database knowledge SHINE values diversity in all its forms as a critical component of innovation, which is fundamental to our success. Every member of the SHINE community benefits from the talents and experiences of our peers, from the mutual respect we exercise, and from the responsibility we take for our actions. SHINE Technologies is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Pay Transparency Policy Employee Rights Under the NLRA Equal Opportunity Employment E-Verify

Job DescriptionBIOFerm™ is looking for a Piping Engineer to be responsible for the design, specification, and coordination of piping systems used in BIOFerm’s renewable energy facilities. This role ensures that all piping layouts, materials, and assemblies meet project requirements, safety standards, and operational performance goals. The ideal candidate has a strong background in piping design for process or industrial systems, with the ability to work collaboratively across disciplines to deliver high-quality, cost-effective designs. BIOFerm™ is a Wisconsin-based renewable energy company specializing in turnkey anaerobic digestion and biogas upgrading facilities. Our mission is to provide sustainable and economical solutions for organic waste diversion, transforming food waste, manure, biosolids, and other organic materials into renewable natural gas (RNG), green energy, vehicle fuel, heat, and organic products. Key Responsibilities: • Design and develop piping systems for biogas and anaerobic digestion facilities, including process flow, utility, and support piping., • Maintain P&IDs, piping layouts, isometric drawings, and material takeoffs., • Select appropriate materials, valves, fittings, and supports based on process conditions, pressure, and compatibility., • Collaborate with process, mechanical, structural, and electrical engineers to ensure integrated, constructible designs., • Review vendor drawings and submittals for compliance with project specifications and industry standards., • Coordinate with project managers, construction teams, and contractors to support fabrication, installation, and testing., • Conduct site visits for layout verification, equipment tie-ins, and field modifications., • Support procurement efforts by providing technical input on bids and evaluating vendor quotations., • Ensure all designs comply with relevant codes, standards, and safety requirements (ASME, ASTM, API, ANSI, etc.)., • Assist during commissioning and start-up phases by providing technical support and design clarification., • Conduct design reviews, constructability assessments, and quality control checks., • Maintain accurate documentation and contribute to the development of standard piping design procedures., • Complete additional tasks as assigned.Competencies & Qualifications:, • Bachelor’s degree in Mechanical Engineering or related field., • 5 years of experience in piping design within industrial, process, or energy sectors (renewable energy experience a plus)., • Strong knowledge of process piping systems, including layout, stress, and material selection., • Proficiency in 2D and 3D CAD design software., • Familiarity with P&ID development, bill of materials (BOM), and construction drawing packages., • Understanding of piping codes and standards such as ASME B31.3, API, and ASTM., • Excellent problem-solving, analytical, and communication skills., • Ability to manage multiple projects and meet deadlines in a fast-paced environment., • Willingness to travel periodically to project sites and vendor facilities., • Valid U.S. driver’s license. To be considered for this position, please submit your cover letter, resume, and salary requirements. To learn more about BIOFerm™ and other positions available, please explore our website at BIOFermEPC.com.

Job Description Our client has been synonymous with dependability and quality in the air freight industry since 1986. As the company has grown, so has the number of industries it serves. Today, the company continues to provide the most excellent customer care-driven service to the air freight industry and many others. By carrying over the core belief structure forged in the air freight business of providing the customer what they want on time and at a competitive rate, our client can provide superior air freight services to our growing list of satisfied customers. They are currently recruiting for an A&P Mechanic job in Milwaukee, WI. What Is In It For You Position Type: Permanent - Full-time Benefits: Health, Dental, Vision, Life, STD/LTD, Vacation Pay, Sick Pay, Holiday Pay, 401(k) A Day In The Life of an A&P Mechanic The position you are applying for will be under general supervision. You are responsible for the maintenance, modification, and servicing of aircraft and aircraft components following the manufacturer’s specification and FARS. Essential Duties of The A&P Mechanic • Perform routine scheduled maintenance and aircraft inspection by ACC’s and current manufacturers' specifications., • Read and interpret aircraft maintenance manuals and specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components., • Modifies aircraft systems or components following drawings, engineering orders, and technical publications., • Assemble and install electrical, mechanical, hydraulic, and structural components and accessories using hand and power tools., • Provide emergency/unscheduled repairs to minimize aircraft downtime. Requires ability to travel., • Review maintenance records and flight logs to schedule prescribed maintenance checks and overhauls., • Process all necessary documentation and paperwork for processes completed., • Follow all clean-up and housekeeping procedures. Minimum Education: • Interpret drawings, specifications, and schematics of aircraft parts/components., • Problem-solving and independent decision-making skills, • Good communication skills, • Operate hand and power tools Vision Requirements: This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing, LLC are those of an Employment Agency

Job DescriptionDescription: POSITION SUMMARY The Process Engineer provides engineering and production support to the die cast floor by developing and maintaining robust die cast processes while striving to achieve lowest cost and highest quality production methods. Must ensure that customer specified quality levels are met or exceeded. Support launch of new product per APQP launch process as needed. ESSENTIAL FUNCTIONS · Responsible for any and all activity associated with assigned die-cast processes, including but not limited to; tooling design and support, simulation, process development, production support, training of hourly staff, process documentation, and selection of perishable cast tooling within company standardization guidelines. · Lead or support production teams to improve uptime and reduce scrap. · Support launch of new products while following MKC launch procedures. · Must consider how cast process changes affect dimensional and part quality, and must use proper caution and due diligence to ensure that product quality is either improved or maintained when changes are made. · Must consider downstream processes such as trim, finishing, machining, and painting when making changes, and how changes will affect downstream processes. · Drive the sampling and correcting of replacement tooling including leading or supporting the review of dimensional issues and corrections. · Support efforts to standardize best practices across all plants. · Support launch teams in development of APQP documents such as inspection sheets, process flow, PFMEA, and control plans. · Ensure processes are stable and meet customer requirements in productivity and quality performance. · Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. · Duties, responsibilities, and activities may change at any time with or without notice. WORKING CONDITIONS Heavy Manufacturing Environment. MKC houses different machinery, equipment, processes, and chemicals which produce potential hazards in the work environment such as: ergonomic, chemical, machine point of operation, and powered industrial vehicle traffic. These hazards are controlled through means of engineering controls, such as machine guarding, and administrative controls, such as safety policies and programs. The noise level in the work environment is moderate to noisy. In certain areas of the facility, employees are required to wear Personal Protective Equipment such as Hearing Protection, Safety Glasses, Safety Toe Shoes, and hand protection. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to talk and listen; and use hands to manipulate objects or controls. The employee is regularly required to stand, stoop, bend, or reach above the shoulders. The employee must be able to lift and/or move up to 50 pounds. Must be able to regularly walk throughout all the manufacturing facilities. Requirements: QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Appropriate education and/or experience may be substituted on an equivalent basis. · Bachelor of Science in mechanical engineering or similar degree with eight or more years of engineering experience in a manufacturing environment, preferably in casting, injection molding, or machining. · ABB programming and familiarity with die cast machine controls preferred. LANGUAGE SKILLS • Ability to read, write, and understand English. · Leadership skills. · Problem solving skills. · Ability to work under pressure. · Computer literate, with the ability to learn new software quickly. TRAVEL REQUIREMENT · Must be able to travel between Madison and Sun Prairie locations regularly

Job Description Job Title: Study Director Job Description Join our dynamic team in the ADME In vitro Screening department, focusing on Absorption, Distribution, Metabolism, and Excretion (ADME). This role involves conducting studies to understand how the body interacts with drugs and compounds. You will work in a metabolism lab using in-vitro techniques to analyze biological samples such as plasma, blood, urine, and feces. This position offers the opportunity to be cross-trained in both biology and chemistry aspects of drug metabolism and pharmacokinetics. Responsibilities • Conduct research with both animal and human biological samples, focusing on in-vitro techniques., • Utilize basic wet chemistry techniques such as pipetting, plate reading, and liquid handling., • Perform stability assays, protein binding assays, and enzyme inhibition assays., • Operate Mass Spectrometry (MS) and Liquid Chromatography-Mass Spectrometry (LC-MS) equipment., • Maintain and grow mammalian cell lines for assay preparation., • Employ sterile techniques and perform cell counting and extractions., • Handle and conduct studies from start to finish using cell lines, blood, or plasma., • Develop assays and run research projects for clients., • Proficiency in aseptic and sterile techniques., • Experience in chemistry and wet chemistry processes., • Knowledge of liquid chromatography and mass spectrometry., • B.S. degree in Chemistry, Biochemistry, Pharmacology, Drug Discovery, or related Life Science field., • Proficient in liquid handling and pipetting., • Ph.D. in Chemistry, Biochemistry, Pharmacology, Drug Discovery, or related Life Science field preferred., • 0-3 years of experience in the field., • Experience in drug metabolism and pharmacokinetics., • Familiarity with Hamilton robotics or liquid handling equipment., • Experience with UV-vis plate readers, cell counters, and various assays., • Experience in mammalian cell culture, cloning, or plasmid transfections. This position is within a busy lab environment focused on drug development and discovery. The role involves working as part of the Discovery BioA and In-vitro Screening teams. It is a fast-paced and high-stress environment that offers the unique opportunity to manage studies from start to finish, a rarity in many labs. The lab encourages a coachable, open-minded, and motivated approach to learning and problem-solving. Job Type & Location This is a Contract to Hire position based out of Madison, WI. Pay and Benefits The pay range for this position is $40.87 - $43.27/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionDescription: Position Overview: The Mechanical Engineering Manager will develop, mentor, and manage our Mechanical Engineering Team. The Manager will set goals and assignments while motivating and leading the staff as required to meet the objectives and deadlines of our projects as scheduled by the business. The Manager leads improving design, engineering processes and documentation to meet professional engineering standards. Designs will meet or exceed quality standards such as ISO 9001 and NRC regulations as required. The base salary range for this position is $130,000 - $160,000 per year plus a comprehensive compensation package. Our salary ranges are determined by role, level, and location. Duties and Responsibilities: Specific duties and responsibilities include, but are not limited to: • Hires, manages, and reviews engineers, designers, & technicians. Provides direction and motivation for these and any related teams of professional engineers and technicians., • Works effectively with the project managers and other functional managers to develop coherent, achievable project requirements, plans, schedules, and milestones., • Facilitates the accomplishment of project milestones within the Mechanical Engineering Team., • Collaborates with the Operations team to ensure engineering changes are managed using robust change control techniques., • Ensures the completion of deliverables and the adherence to timelines, making alterations when necessary to meet expectations., • Develop team standard operating procedures that ensure effective and professional product development., • Supports Business Development efforts by participating in occasional customer interface and in supplying relevant technical information to meet customer bid requirements., • Develops the budgets and capital expenditure needs for the department., • Develop and manage business relationships with contractors and suppliers to support project requirements including ensuring on time delivery to requirements Requirements: Qualifications: • BS Engineering/related field or equivalent experience; advanced education and/or related certifications are a plus, • Ten plus years’ experience in a technical industry, preferably leading an engineering team [SM3.1]with responsibility for meeting strict deadlines., • Proficient leadership management skills, • Highly skilled in verbal and written communications; effective organizational skills, • Adaptable to change in the work environment., • Demonstrated project management skills, principles, techniques, tools, and software, • Excellent computer skills: MS Office and SolidWorks SHINE values diversity in all its forms as a critical component of innovation, which is fundamental to our success. Every member of the SHINE community benefits from the talents and experiences of our peers, from the mutual respect we exercise, and from the responsibility we take for our actions. SHINE Technologies is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Pay Transparency Policy Employee Rights Under the NLRA Equal Opportunity Employment E-Verify

Job DescriptionBIOFerm™ is currently looking for a Civil and Structural Engineer. The Civil and Structural Engineer is responsible for the design, analysis, and oversight of all civil and structural elements of BIOFerm’s renewable energy facilities. This role supports project development through detailed design, permitting, construction support, and field coordination to ensure safe, cost-effective, and durable infrastructure solutions.The ideal candidate has experience in industrial or energy project environments, with proficiency in site design, foundations, concrete and steel structures, and civil infrastructure planning. BIOFerm™ is a Wisconsin-based renewable energy company specializing in turnkey anaerobic digestion and biogas upgrading facilities. Our mission is to provide sustainable and economical solutions for organic waste diversion, transforming food waste, manure, biosolids, and other organic materials into renewable natural gas (RNG), green energy, vehicle fuel, heat, and organic products. Key Responsibilities: • Develop and review civil and structural design documents, including site layouts, grading plans, foundations, and structural systems for process equipment and buildings., • Perform engineering analyses and calculations for loads, foundations, and framing systems to ensure compliance with applicable codes and standards., • Prepare and review construction drawings, specifications, and supporting documentation., • Coordinate with internal engineering disciplines (mechanical, electrical, and process) to integrate civil and structural designs into complete project packages., • Conduct site evaluations to assess geotechnical conditions, drainage, and constructability considerations., • Support permitting and regulatory submittals by preparing drawings, calculations, and technical documentation., • Work with project managers to establish schedules, budgets, and scopes of work for assigned tasks., • Provide technical support during construction, including responding to RFIs, reviewing shop drawings, and performing site inspections., • Ensure structural and civil work meets safety, quality, and environmental standards., • Collaborate with external engineering firms, contractors, and vendors to align on design requirements and resolve issues efficiently., • Participate in value engineering efforts to optimize cost, constructability, and performance., • Travel to project sites as needed for inspections, construction support, and client coordination., • Complete additional tasks as assigned.Competencies & Qualifications:, • Bachelor’s degree in Civil or Structural Engineering (Master’s degree preferred)., • 3–7 years of relevant experience in industrial, renewable energy, or infrastructure projects and modular design., • Professional Engineer (PE) license preferred or ability to obtain licensure within a reasonable timeframe., • Proficiency in AutoCAD Civil 3D and structural analysis/design software (e.g., RISA, STAAD, or similar)., • Strong understanding of relevant codes and standards (IBC, ASCE 7, ACI, AISC, ASTM)., • Experience with concrete foundations, steel framing, and site development for process facilities., • Familiarity with stormwater management, grading, and erosion control design., • Ability to work effectively in a multidisciplinary team environment., • Excellent written and verbal communication skills., • Strong organizational skills with the ability to manage multiple priorities and deadlines., • Willingness to travel up to 15%., • Valid U.S. driver’s license. To be considered for this position, please submit your cover letter, resume, and salary requirements. To learn more about BIOFerm™ and other positions available, please explore our website at BIOFermEPC.com.

Job Description Sharpe Engineering & Equipment is seeking a Mechanical Project Engineer – Industrial Systems to support the design, development, and execution of critical mechanical utility systems for industrial and food & beverage processing environments. This hands-on engineering role will focus on boiler systems, steam distribution, hot water systems, and glycol-based cooling systems, taking projects from concept through design, equipment specification, installation, and commissioning. You’ll play a key role in delivering reliable, efficient, and high-performing systems that support complex operations. In this role, you’ll collaborate closely with internal engineering teams, project managers, vendors, and clients—helping bring technically sound, practical solutions to life while supporting Sharpe’s commitment to quality and operational excellence. Industrial Mechanical System Design (Primary Focus) • Design and support industrial boiler systems, steam and condensate return systems, hot water heating systems, and glycol-based cooling systems, • Perform load calculations, heat transfer analysis, equipment sizing, and pump and piping design, • Prepare PFDs, P&IDs, system layouts, and equipment specifications, • Assist in selecting boilers, heat exchangers, pumps, expansion tanks, controls, and related components, preferred, • Execute engineering tasks aligned with project scope, schedule, and budget of systems, • Prepare and review equipment specifications and vendor submittals of systems, • Provide technical problem-solving and design recommendations, • Support commissioning, field testing, troubleshooting, and installation activities, • Ensure compliance with ASME, NFPA, and applicable mechanical and industrial standards, • Identify opportunities to improve engineering standards and workflows In this role, you’ll: • Work on high-impact infrastructure systems that power real-world operations, • Be part of a collaborative, hands-on engineering team, • Continue to grow your technical expertise and project ownership What We’re Looking For Education & Experience • Degree in Mechanical Engineering required, • Experience in designing industrial boiler systems, steam/hydronic systems, or glycol cooling systems, • Experience in industrial or manufacturing environments preferred, • Strong understanding of steam generation, hydronic heating, and glycol-based systems, • Experience with AutoCAD, • Ability to develop and review PFDs and P&IDs, • Strong problem-solving and engineering judgment, • Excellent written and verbal communication skills Sharpe Engineering offers a comprehensive benefits package designed to support your health, well-being, and work-life balance. Our benefits include paid time off (PTO) plus 10 paid holidays, a flexible work schedule, and medical, dental, and vision insurance. We also provide short-term and long-term disability coverage, as well as life insurance, helping ensure peace of mind for you and your family. Sharpe Engineering & Equipment is an Equal Opportunity Employer.

Job Description Own the system-level vision that turns first-of-a-kind fusion hardware into a cohesive, scalable reality—leading the integration of breakthrough science and engineering on the path to commercial fusion energy. The Head of Systems Engineering will lead the systems engineering function at Realta Fusion, establishing technical requirements, driving system integration, and ensuring our magnetic mirror fusion devices meet performance, safety, and operational objectives. This senior technical leadership role demands expertise in complex system architecture, requirements management, and integration of multidisciplinary subsystems. You will bridge plasma physics, mechanical, electrical, nuclear, and controls engineering teams to ensure coherent system design and successful execution from experimental devices through commercial deployment. The ideal candidate combines deep systems engineering expertise with strategic leadership, thriving in a first-of-a-kind hardware environment where disciplined systems thinking directly impacts our ability to deliver commercial fusion energy. Realta Fusion is a rapidly growing start-up developing compact magnetic mirror fusion energy systems to address the biggest challenge of our time – tackling global climate change while ensuring a sufficient energy supply for at least ten billion people on (and off) earth. We are building a team with diverse talents dedicated to making fusion energy a real solution to humanity’s most pressing problem. Key Responsibilities Systems Architecture & Requirements • Define and maintain system architecture for fusion devices across experimental, pilot, and commercial product lines, • Establish and manage technical requirements from physics performance through operational, safety, and regulatory constraints, • Lead system decomposition and allocation of requirements to subsystems and components, • Develop and maintain interface control documents across mechanical, electrical, plasma, and control systems, • Lead system integration activities ensuring subsystems work together to meet top-level requirements, • Define verification and validation strategy including analysis, testing, inspection, and demonstration, • Oversee commissioning and acceptance testing of fusion devices and major subsystems, • Manage technical reviews (PDR, CDR, TRR) ensuring design maturity and readiness, • Build, lead, and mentor systems engineering team (initially 2-3, scaling to 8-12), • Establish systems engineering processes, tools, and best practices for fusion development, • Recruit systems engineers with experience in complex hardware integration, • Partner with plasma physics to translate physics requirements into engineering specifications, • Work with mechanical, electrical, nuclear, and controls leads to ensure integrated system design, • Coordinate with operations on maintainability, operability, and lifetime performance requirements, • Provide systems engineering support to experimental campaigns and pilot plant development programs, • Lead technical risk assessment and develop mitigation strategies for system-level risks, • Support project management with integrated schedules, technical dependencies, and critical path analysis, • Represent systems engineering capabilities to investors, partners, and technical stakeholders, • Collaborate with national laboratories and research institutions on systems engineering best practices for fusion Education & Experience • BS in Systems Engineering, Aerospace Engineering, Mechanical Engineering, or related technical discipline. Advanced degree preferred, • 15+ years systems engineering experience in complex hardware programs (aerospace, defense, energy, accelerators, research facilities), • 5+ years leading systems engineering teams or serving as chief engineer on major programs, • Deep expertise in systems engineering processes including requirements management, functional analysis, interface management, and V&V, • Strong understanding of mechanical, electrical, and control systems to facilitate integration across disciplines, • Proficiency with systems engineering tools (DOORS, Cameo, modeling and simulation), • Experience with Model-Based Systems Engineering (MBSE) approaches, • Knowledge of systems safety analysis (FMEA, fault trees, hazard analysis), • Proven ability to lead technical teams and influence across organizational boundaries, • Strong analytical and problem-solving skills with systems-level thinking, • Excellent communication skills translating between technical specialists and executive leadership, • Experience making critical technical decisions with incomplete information and competing constraints Compensation & Benefits What we are working on is hard… and hugely important. Realta Fusion is assembling a talented team bound together by a passion to solve humanity’s biggest challenge with first-of-a-kind technology. Additionally, Realta offers: • Competitive compensation package, including equity stock options, • Comprehensive benefits including health, dental, and vision insurance, plus a 401(k), • Flexible paid time off (PTO) to support work-life balance

Job Description Sharpe Engineering & Equipment is seeking an experienced Electrical & Controls Engineer to lead the design, programming, and integration of advanced automation and electrical systems for food & beverage processing projects. This senior technical role will drive electrical design excellence, support commissioning, and collaborate with cross-functional teams to deliver safe, reliable, and high-performance solutions. You’ll work closely with project managers, mechanical engineers, contractors, and integrators to ensure every system meets client expectations and Sharpe’s commitment to quality, innovation, and our Core Values: Integrity, Collaboration, Responsibility, Commitment to Stakeholders, and People-Centric Focus. • Key Responsibilities, • Lead electrical design including schematics, panel layouts, power distribution, and motor control systems., • Develop and implement PLC, HMI, and SCADA programming (Rockwell preferred)., • Create control narratives, I/O lists, and functional descriptions., • Oversee contractors and integrators during installation, testing, and commissioning., • Collaborate with engineering teams to deliver fully integrated solutions., • Maintain electrical and controls standards; support continuous improvement initiatives., • Mentor junior engineers and designers; promote safety and quality. You’ll join a people-centric organization built on collaboration, responsibility, and a commitment to doing what’s right for our clients and our team. Here, your leadership drives continuous improvement, supports innovation, and contributes to the long-term success of a growing company. If you’re motivated by making an impact, building strong partnerships, and leading projects that truly deliver value, Sharpe is the place to do your best work. Requirements What We’re Looking For • Bachelor’s degree in Electrical Engineering or related field (required)., • 7+ years of experience in industrial electrical engineering, automation, and controls integration., • Strong expertise with Rockwell Automation platforms (PLC/HMI/SCADA)., • Proficiency in AutoCAD Electrical and knowledge of NEC, NFPA 70E, UL 508A, and related codes., • Experience coordinating contractors and executing field commissioning., • Strong communication, documentation, and cross-functional collaboration skills. Sharpe Engineering offers a comprehensive benefits package designed to support your health, well-being, and work-life balance. Our benefits include paid time off (PTO) plus 10 paid holidays, a flexible work schedule, and medical, dental, and vision insurance. We also provide short-term and long-term disability coverage, as well as life insurance, helping ensure peace of mind for you and your family. Sharpe Engineering & Equipment is an Equal Opportunity Employer.

Job DescriptionDescription: POSITION SUMMARY The Die Repair Technician is responsible for maintaining, repairing, and troubleshooting aluminum die cast tooling to ensure optimal performance, part quality, and production efficiency within a high-volume die casting environment. This role performs preventative maintenance, diagnostics, and corrective repairs on dies, including addressing wear, damage, and dimensional issues that impact casting integrity and downstream machining processes. The Die Repair Technician works closely with die casting, machining, engineering, and quality teams to identify root causes of tooling-related defects, implement improvements, and support continuous production uptime. This position plays a critical role in extending die life, reducing scrap, and ensuring components meet tight tolerances and customer specifications. ESSENTIAL FUNCTIONS · Assemble casting dies. · Troubleshoot dies that are not working. · Make repairs to a die while it is on a die-cast machine. · Create maintenance work requisitions for repairs to die maintenance equipment, die-related issues such as hydraulic cylinder fixes, electrical work, etc. · Reading prints (Product drawings, Die-Cast and Trim Die prints) and use measuring equipment (Micrometer, Depth Micrometer, Dial Indicators, Calipers, etc.). · Use AutoVue to view designs. · Setting limit switches and final fitting slide(s) and slide locks. · Operate ejector pin grinder, hydraulic cavity extraction equipment, and hydraulic power unit used for final inspection of hydraulic cylinder setups. · Maintain a clean and organized work environment. · Performs other related duties as assigned. · Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. · Duties, responsibilities, and activities may change at any time with or without notice. WORKING CONDITIONS Heavy Manufacturing Environment. MKC houses different machinery, equipment, processes, and chemicals which produce potential hazards in the work environment such as: ergonomic, chemical, machine point of operation, and powered industrial vehicle traffic. These hazards are controlled through means of engineering controls, such as machine guarding, and administrative controls, such as safety policies and programs. The noise level in the work environment is moderate to noisy. In certain areas of the facility, employees are required to wear Personal Protective Equipment such as Hearing Protection, Safety Glasses, Safety Toe Shoes, and hand protection. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to talk and listen; and use hands to manipulate objects or controls. The employee is regularly required to stand, stoop, bend, or reach above the shoulders. The employee must be able to lift and/or move up to 70 pounds. Must be able to regularly walk throughout all the manufacturing facilities. Requirements: QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Appropriate education and/or experience may be substituted on an equivalent basis. • High School Diploma or equivalent., • Strong mechanical background, • Ability to read, write, and understand English., • Must be able to obtain MKC forklift and crane certification. · Less than 5%

Job Description As a BIM Project Specialist, you will be responsible for supporting the design, coordination, and execution of Building Information Modeling (BIM) processes specifically for plumbing systems. You will work closely with engineers and designers to develop detailed Revit models, ensuring that mechanical, electrical, and plumbing systems are accurately represented and well-coordinated within the project. Your role will contribute to enhancing project efficiency, collaboration, and overall quality. As part of EUA, a fully integrated architecture and engineering firm, BIM coordination is crucial in facilitating seamless collaboration across disciplines. Our holistic approach to design requires accurate and efficient coordination between HVAC, plumbing, electrical, structural, and architectural systems, ensuring that all elements of a project are aligned from concept through to completion. Key Responsibilities • Plumbing Modeling: Create, manage, and maintain detailed Revit models for plumbing systems, from design development through to detailed documentation. Ensure that all models comply with industry standards and project specifications., • BIM Coordination for MEP: Lead coordination efforts between plumbing systems with other building systems. Facilitate and lead coordination and clash detection meetings with internal teams and external consultants using tools such as Navisworks and ACC BIM360. Ensure timely resolution of clashes and conflicts by working closely with all project stakeholders to deliver coordinated, conflict-free designs., • Design Support: Assist in the virtual design and layout of plumbing systems, providing support for system sizing, routing, and space management., • Standards and Quality Control: Ensure adherence to BIM execution plans (BEP), managing project-specific BIM standards for plumbing systems. Perform regular quality control checks on models to maintain accuracy and alignment with project goals., • Knowledge of EUA Standards: Ensure all plumbing models adhere to EUA's internal standards and best practices, maintaining consistency, sustainability, and accuracy across all projects. Your work will reflect EUA’s commitment to high-quality, integrated design and engineering excellence., • Training and Support: Provide technical support to engineers and designers on Revit and BIM processes related to plumbing systems. Conduct training sessions on best practices and advanced features in Revit., • Accurate and Coordinated MEP Models: Ensure that plumbing Revit models are fully coordinated with other building systems, free from significant clashes, and meet project requirements., • Improved System Design: Provide accurate and efficient design and coordination of plumbing systems, ensuring optimal performance, space utilization, and ease of installation., • Effective Coordination and Clash Resolution: Lead coordination and clash detection meetings, ensuring that all design conflicts are identified early and resolved efficiently. Streamline interdisciplinary collaboration to minimize delays and enhance project delivery., • Optimized BIM Processes: Continuously refine and optimize EUA’s BIM processes for plumbing systems, contributing to improved project timelines and quality outcomes., • Two- or four-year degree in Architectural Technology or Engineering Technology, • Unlicensed / May pursue designer certification. CPDT preferred but not required., • 5-10+ years of experience with Revit and BIM tools in a plumbing context., • Proficiency with Navisworks, Revit, Dynamo, and other relevant BIM software., • Experience leading coordination meetings, performing clash detection, and resolving design conflicts., • Knowledge of plumbing design principles, codes, and standards., • Strong problem-solving skills, attention to detail, and ability to work within multidisciplinary teams., • Excellent communication skills and the ability to mentor others on BIM/VDC processes related to plumbing., • Has a proactive approach to projects and problem solving and can self-direct project work, tasks, and process improvements., • Assists in on-site observation and documentation., • Pay range for this position is $70,000 to $95,000 depending on experience

Job Description Job Title: Research Assistant Job Description Join our dynamic team in the Metabolism department, focusing on Drug Metabolism and Pharmacokinetics. As part of the ADME In vitro Screening team, you'll delve into the fascinating world of absorption, distribution, metabolism, and excretion, where you'll explore what the body does to a drug or compound. This role offers a blend of chemistry lab work and biological theory, involving extensive in-vitro work with test tubes to derive meaningful data and identify trends in biological samples. Responsibilities • Work with various biological samples such as plasma, blood, urine, and feces from both animal and human sources., • Receive cross-training in both biology and chemistry aspects of the business, starting with your area of expertise., • Focus on mammalian cell culture, maintaining and growing cell lines for assays., • Perform cell counting, sterile techniques, seeding cells onto assay plates, and harvesting plates., • Run extractions and support the in-life team with basic wet chemistry techniques including pipetting, using plate readers, liquid handlers, and centrifuges., • Conduct stability, protein binding, and enzyme inhibition assays., • Operate Mass Spectrometry and LC-MS equipment, handle radio reader compounds, and conduct extractions and sample running., • Participate in animal study simulations using cell lines, blood, or plasma, handling studies from initiation to completion., • B.S. degree in Chemistry, Biology, Biochemistry, Molecular Biology, or a related Life Science field with 2-3 years of experience, or a Master's degree with 0-1 year of experience., • Strong in biology, biochemistry, cell culture, and cell biology., • Proficiency in aseptic and sterile techniques., • Experience with wet chemistry, pipetting, and handling biological samples., • Industry or academic experience in related fields., • Experience in mammalian cell culture, cloning, plasmid transfections, and qPCR techniques., • Familiarity with Hamilton robotics, UV vis plate readers, cell counters, and liquid handlers. This position is set in a busy lab environment within the Metabolism In-vitro team. The work involves close collaboration with the in-life team, with a forecast horizon of 6-8 weeks, emphasizing the need for a flexible and contingent workforce to manage peak workloads. Job Type & Location This is a Contract to Hire position based out of Madison, WI. Pay and Benefits The pay range for this position is $29.00 - $31.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Sharpe Engineering & Equipment is seeking a skilled Project Manager to lead and execute capital and process engineering projects for our clients in the food & beverage industry. In this role, you will manage the full project lifecycle, from scope development and budgeting to installation, commissioning, and closeout, ensuring projects are delivered safely, on time, and within budget. You will collaborate closely with engineering teams, contractors, and client stakeholders while supporting continuous improvement across our project delivery processes. This role is hands-on, client-facing, and critical to supporting Sharpe’s commitment to operational excellence and people-centric project leadership. You’ll collaborate closely with Engineering, Controls, and Project Management teams to scope technical solutions, communicate value, and deliver exceptional service that reflects Sharpe’s Core Values: Integrity, Collaboration, Responsibility, Commitment to Stakeholders, and People-Centric Focus. • Key Responsibilities, • Plan, coordinate, and deliver capital projects from concept through commissioning, including equipment installations, facility upgrades, and process improvements., • Develop and manage project scopes, schedules, budgets, and resource plans., • Serve as the primary point of contact for clients, vendors, contractors, and internal teams., • Lead multidisciplinary coordination with mechanical, electrical, controls, and operations teams throughout design and execution., • Oversee contractor performance, site activities, safety, quality, and schedule adherence., • Track project progress and provide regular status updates, forecasts, and reports to leadership and clients., • Ensure documentation, including design changes, site conditions, and closeout packages, is timely, accurate, and complete. You’ll join a people-centric organization built on collaboration, responsibility, and a commitment to doing what’s right for our clients and our team. Here, your leadership drives continuous improvement, supports innovation, and contributes to the long-term success of a growing company. If you’re motivated by making an impact, building strong partnerships, and leading projects that truly deliver value, Sharpe is the place to do your best work. Requirements What We’re Looking For • Bachelor’s degree in Engineering or a related STEM field (preferred)., • 5+ years of project management or engineering experience in industrial, capital equipment, or systems integration environments., • Strong technical understanding of mechanical, electrical, or process systems., • Experience managing budgets, contractors, and field execution., • Excellent communication, collaboration, and problem-solving skills., • Ability to navigate fast-paced environments and lead teams toward successful project outcomes. Sharpe Engineering offers a comprehensive benefits package designed to support your health, well-being, and work-life balance. Our benefits include paid time off (PTO) plus 10 paid holidays, a flexible work schedule, and medical, dental, and vision insurance. We also provide short-term and long-term disability coverage, as well as life insurance, helping ensure peace of mind for you and your family. Sharpe Engineering & Equipment is an Equal Opportunity Employer.

Job Description At Findorff, we bring expertise and value in construction that extends far beyond building. From humble beginnings in 1890, Findorff has now grown to become one of the region's most trusted construction firms. As an employee-owned company, our staff take pride in shaping communities through a commitment to quality and relationships. As a Senior Project Manager – Mission Critical, you’ll lead the successful delivery of highly complex, large-scale projects such as data centers and other mission critical facilities. You bring deep expertise across all phases of construction—preconstruction, project execution, and closeout—while maintaining a strong focus on safety, quality, financial performance, and client satisfaction. In this role, you’ll provide strategic leadership to project teams, oversee multiple large or complex projects, and serve as a trusted partner to owners and stakeholders. Your ability to navigate challenges, lead teams, and drive results will be critical to delivering high-performance environments where precision and reliability are essential. Key Responsibilities: • Foster, develop, and maintain strong relationships with Owners, Architects, Subcontractors and colleagues while building consensus with project stakeholders through positive communication., • Prepare and manage the process of issuing subcontracts, purchase orders, change orders, monthly payment requests for project teams., • Actively manage contract terms and compliances, including prompt invoice approval, resolving issues and Certificates of Insurance., • Create and update project schedules and keep project stakeholders informed., • Proactively manage procurement logs and submittal processes., • Assist Superintendent with short duration scheduling, quantity tracking, and Top 10 lists., • Demonstrate active participation in Storyboarding efforts., • Has demonstrated a broad knowledge of building systems, components and construction methods, including the complexities in dependency and sequences of all construction related activities., • Proven record of strong and timely project close-out. Ensure all close out activities to run smoothly., • Bachelor's Degree in Construction Management, Engineering (Electrical or Mechanical), Architecture, Finance or related field (equivalent experience in lieu of degree will be considered)., • 10-15 years of progressive experience managing construction projects exceeding $50 million., • A broad knowledge of building systems and construction methods., • Experience with a self-perform GC is a plus., • An understanding of the complexities and sequences of all construction activities., • Competitive pay and benefits, • A people-first, inclusive culture, • Onsite fitness center (Madison & Milwaukee), • Heated, underground parking, • Employee Stock Ownership Plan (ESOP), • Generous PTO and floating holidays, • Healthy 401(k) and Profit Sharing, • Paid Parental Leave, • Findorff Shop credit to buy company swag, • Career growth and development Findorff provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionEstablished multi-disciplined consulting firm is looking to add a talented Senior Mechanical Engineer to their Madison, Wisconsin team! Responsibilities: • Primary engineering contact for architectural K-12 and public-sector projects, • Collaborate with other disciplines to integrate mechanical systems seamlessly into building designs, • Coordinate with utilities, permitting agencies, and code authorities to secure timely approvals, • Participate in public and board meetings as needed for school and municipal projects, • Mentor/train junior staff, • Lead mechanical system design for a variety of building types (HVAC systems, ventilation and energy recovery systems, building automation and controls integration), • Design of domestic water, sanitary, and storm plumbing systems, • Conduct load calculations, equipment sizing, pressure loss analysis, and energy modeling, • Develop detailed construction drawings and specifications using Revit, AutoCAD, and other design tools, • Stamp and certify mechanical construction documents in support of permit submittals and construction, • Review designs, respond to RFIs, and support construction-phase services, • Provide accurate cost estimates and support scope development for new projects/proposals, • Ensure QA/QC procedures are followed Requirements: • Bachelor’s degree in mechanical engineering, • 8+ years of experience in mechanical building systems design, • PE License, • Experience with K-12 and/or municipal building projects preferred, • LEED AP, Certified Energy Manager (CEM), or related credentials preferred, • Working knowledge of applicable codes and standards (IECC, IBC, ASHRAE 90.1, 62.1, and plumbing codes), • Proficient with Revit, Bluebeam, and mechanical system modeling/selections tools Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description At Findorff, we bring expertise and value in construction that extends far beyond building. From humble beginnings in 1890, Findorff has now grown to become one of the region's most trusted construction firms. As an employee-owned company, our staff take pride in shaping communities through a commitment to quality and relationships. As an MEP Project Manager – Mission Critical, you’ll lead the planning, coordination, and execution of complex mechanical, electrical, plumbing, and fire protection systems across high-performance projects such as data centers and other mission critical facilities. You bring deep technical expertise, strong leadership, and a proactive mindset to ensure seamless integration of building systems from preconstruction through commissioning and closeout. Key Responsibilities: • Prepare and oversee MEP subcontracts, purchase orders, change orders, and monthly payment requests., • Manage MEP contract terms, including risk identification, issue resolution, and invoice approvals., • Prepare, distribute, and track RFIs, CBs, RFPs, and other change documentation., • In collaboration with project team, develop and maintain detailed MEP schedules aligned with overall project milestones and commissioning activities., • Coordinate equipment procurement, including OFCI and CFCI, and track critical path activities., • Lead the commissioning process, including coordination with third-party agents, system documentation, training, and turnover., • Manage all MEP closeout activities including punch lists, O&M manuals, permits, and owner occupancy., • Lead MEP bidding efforts, including bid package strategy, leveling, and subcontractor negotiations., • Participate in estimating, quantity takeoffs, and budget development., • Conduct constructability reviews and collaborate with design teams to align system performance expectations., • Collaborate with Superintendents on short-term scheduling, look-aheads, and trade coordination., • Drive quality control processes for MEP scopes, including first-install reviews and inspections., • Coordinate closely with inspectors and regulatory agencies., • Lead MEP buyout strategies and subcontractor negotiations., • Manage change orders and cost impacts using structured change management processes., • Monitor project financials including cost projections, cash flow, and budget performance., • Manage multiple projects of varying size and complexity with strong organization and accountability. Strong knowledge of mechanical, electrical, plumbing, and fire protection systems * Excellent communication, organization, and leadership skills * Ability to manage multiple projects and priorities effectively * Strong problem-solving, analytical, and conflict-resolution abilities * Collaborative mindset and commitment to team success Education & Experience: * Bachelor’s degree in Construction Management, Engineering (Electrical or Mechanical), or equivalent experience * 5-10 years of construction industry experience with a focus on MEP systems • Competitive pay and benefits, • A people-first, inclusive culture, • Onsite fitness center (Madison & Milwaukee), • Heated, underground parking, • Employee Stock Ownership Plan (ESOP), • Generous PTO and floating holidays, • Healthy 401(k) and Profit Sharing, • Paid Parental Leave, • Findorff Shop credit to buy company swag, • Career growth and development Findorff provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Job Title: Study Director Job Description Join our dynamic team in the ADME In vitro Screening department, focusing on Absorption, Distribution, Metabolism, and Excretion (ADME). This role involves conducting studies to understand how the body interacts with drugs and compounds. You will work in a metabolism lab using in-vitro techniques to analyze biological samples such as plasma, blood, urine, and feces. This position offers the opportunity to be cross-trained in both biology and chemistry aspects of drug metabolism and pharmacokinetics. Responsibilities • Conduct research with both animal and human biological samples, focusing on in-vitro techniques., • Utilize basic wet chemistry techniques such as pipetting, plate reading, and liquid handling., • Perform stability assays, protein binding assays, and enzyme inhibition assays., • Operate Mass Spectrometry (MS) and Liquid Chromatography-Mass Spectrometry (LC-MS) equipment., • Maintain and grow mammalian cell lines for assay preparation., • Employ sterile techniques and perform cell counting and extractions., • Handle and conduct studies from start to finish using cell lines, blood, or plasma., • Develop assays and run research projects for clients., • Proficiency in aseptic and sterile techniques., • Experience in chemistry and wet chemistry processes., • Knowledge of liquid chromatography and mass spectrometry., • B.S. degree in Chemistry, Biochemistry, Pharmacology, Drug Discovery, or related Life Science field., • Proficient in liquid handling and pipetting., • Ph.D. in Chemistry, Biochemistry, Pharmacology, Drug Discovery, or related Life Science field preferred., • 0-3 years of experience in the field., • Experience in drug metabolism and pharmacokinetics., • Familiarity with Hamilton robotics or liquid handling equipment., • Experience with UV-vis plate readers, cell counters, and various assays., • Experience in mammalian cell culture, cloning, or plasmid transfections. This position is within a busy lab environment focused on drug development and discovery. The role involves working as part of the Discovery BioA and In-vitro Screening teams. It is a fast-paced and high-stress environment that offers the unique opportunity to manage studies from start to finish, a rarity in many labs. The lab encourages a coachable, open-minded, and motivated approach to learning and problem-solving. Job Type & Location This is a Contract to Hire position based out of Madison, WI. Pay and Benefits The pay range for this position is $40.87 - $43.27/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Mechanical Engineering Internship C-Motive is seeking an eager, high-energy engineering intern that will assist the motor development team in a wide variety of engineering and assembly related tasks. Mechanical Engineering Intern Summer 2026 Qualifications • Admitted to an undergraduate or graduat

The Mechanical Engineering Intern role will have a mix of independent tasks as well as work with a mentor to contribute to more complex engineering deliverables. Reports to the Group Lead, Mechanical Design in the Mechanical Engineering department. Basic Mechanical Engineering or equivalent courses

A leading AI innovation company is looking for an AI Tutor in Mechanical Engineering to join remotely. Ideal candidates should hold an advanced degree in Mechanical Engineering, be experienced in relevant fields, and possess an advanced level of English.

The Mechanical Engineering Intern will be exposed to various aspects of the Product Engineering team. Mechanical Engineering Intern (Summer 2026). Franklin Electric is seeking a Summer Intern (June-August) who is interested in a career in Mechanical Engineering or a related field.

Requirements Bachelors, Masters, or PhD in Mechanical Engineering or closely related field Strong Python proficiency for numerical validation 3+ years professional or advanced academic experience in one or more of: Thermodynamics, Heat Transfer, Fluid Mechanics Solid Mechanics, Dynamics & Vibrat

ANSYS Fluent / STAR-CCM+, Siemens Opcenter, SAP S/4HANA) - Design multi-step tasks grounded in your real workflows that require navigating multiple apps, files, and stakeholders in a way that meaningfully challenges frontier AI agents - Collaborate with other automotive engineering experts in your f

You have at least 1 year of professional experience with focus in one of the following fields: Thermodynamics, Fluid Mechanics, Heat Transfer, Solid Mechanics, Dynamics and Vibration, Materials Science for Mechanical Engineers, Engineering Mechanics, Mechanical Design, Machine Elements, Manufacturin

Locate sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments.

Locate sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments.

Bachelor’s degree in Construction Management, Civil Engineering, or a related field, preferred.